Caterpillarchallenger
Caterpillar 75E
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar Challenger 75E is a rubber-track row-crop tractor in Caterpillar's Challenger series, built for high-horsepower tillage, planting, and grain-cart work on large-acreage farms. Caterpillar produced it from 1998 to 2001 at its DeKalb, Illinois plant as the top of the late-1990s Cat-era Challenger line. Power comes from Caterpillar's own 3176/3176C, a turbocharged 10.3 L inline-six diesel rated at 340 gross hp (253.5 kW), driving a 10-speed forward, 2-speed reverse full-power-shift transmission through hydrostatic differential steering. Operating weight runs about 15,785 kg (34,800 lb) on Caterpillar's Mobil-Trac rubber-belted undercarriage. The 75E capped a lineage that began with the 75 (1991-92), continued through the 75C (1993-96) and 75D (1996-97), each generation carrying updated engine tuning and cab electronics on largely the same chassis and track platform.
Across the 75, 75C, 75D, and 75E progression Caterpillar refined engine electronics, cab ergonomics, and Mobil-Trac belt and roller design while holding horsepower and chassis dimensions close to constant; the 75E represents the final and most developed Cat-built version before Caterpillar sold the Challenger brand to AGCO in 2002, after which the line continued as the AGCO-built MT700-series. Two documented serial prefixes, 1HM and 6HS, appear on 75E production, reflecting running changes made during the model's short four-year run. In today's used and parts market the 75E holds value as the last Cat-badged Challenger before the AGCO handoff, drawing buyers who want a proven 3176C engine and Cat-spec Mobil-Trac undercarriage without AGCO-era electronics; parts demand centers on undercarriage wear components, final drive seals, and 3176C fuel system parts as these machines age past their original service life.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 75E specifications
Engine
| Engine model | Caterpillar 6-cylinder diesel, 10.3 L (629 ci) displacement |
| Aspiration / cooling | Turbocharged, liquid-cooled |
| Gross power | 340 hp (253.5 kW) at 2,100 rpm |
| Bore x stroke | 125 x 140 mm (4.92 x 5.51 in) |
| Compression ratio | 16:1 |
| Emissions tier | Not documented for this model year range (1998-2001, pre-Tier regulatory era for this class) |
Weights
| Operating weight | 15,785 kg (34,800 lb) |
| Ground pressure | Not published in available spec sheets |
Dimensions
| Wheelbase | 272 cm (107.1 in), approximate — confirm exact figure with your dealer |
| Track (belt) width | 64 cm (25 in) |
| Overall length / width / height | Not documented in available spec sheets for this exact model |
| Ground clearance | Not documented in available spec sheets for this exact model |
Performance
| Transmission | Full power-shift, 10 forward / 2 reverse gears |
| Steering | Hydrostatic differential steering |
| Brakes | Hydraulic caliper disc |
| Drawbar power | Rated approx. 266 hp (198.4 kW); test figure approx. 263 hp (196.4 kW), approximate — confirm with your dealer |
| PTO power | Rated approx. 292 hp (217.7 kW) at 1,000 rpm PTO speed |
| Travel speed | Not documented for this exact model in available sources |
Service capacities (summary)
| Fuel tank | 1,059.8 L (280 gal) |
| Cooling system | 56.8 L (60 qt / 15 gal) |
| Hydraulic system | 68.1 L (18 gal), closed-center circuit, approx. 151.4 lpm (40 gpm) pump flow, approx. 200 bar (2,900 psi) relief pressure, approximate — confirm with your dealer |
| Engine oil | Not documented in available spec sheets |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
75E fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) - Cat 3176/3176C 10.3L turbocharged inline-6 diesel | 30.3 L (32 US qt / 8.0 US gal) | Cat DEO (Diesel Engine Oil). SAE 15W-40 for standard ambient temperatures; SAE 10W-30 for cold-start conditions below freezing. Select viscosity by the cold-weather chart for the coldest expected start temperature. |
| Cooling system | 56.8 L (60 US qt / 15 US gal) | Cat DEAC (Diesel Engine Antifreeze/Coolant) mixed 50/50 with water for standard freeze protection; Cat ELC (Extended Life Coolant) accepted as an alternative fill. Raise antifreeze concentration for extreme cold per the freeze-protection chart; do not exceed the maximum glycol ratio. |
| Fuel tank | 1059.8 L (280 US gal) | No. 2-D diesel fuel for normal operation; switch to No. 1-D or a winter-blend diesel in cold climates to prevent fuel waxing/gelling. |
| Hydraulic system (closed-center implement circuit) | 68.1 L (18 US gal) | Factory-filled with straight Cat 10W HYDO hydraulic oil. Heavier-viscosity hydraulic oil may be specified for warm climates or implement duty at order time or by the dealer; match replacement fluid to the original fill weight. |
| Power train (transmission, wet-disc brakes, final drives - common compartment) | Not consistently documented for this exact machine across available reference sources - confirm fill volume against the OMM or with a dealer before service. | Cat TDTO-TMS (Transmission/Drive Train Oil, Multi-Season), a synthetic-blend fluid exceeding the TO-4M specification, rated across roughly -10 C to 50 C (14 F to 122 F). Recommended in place of straight-weight Cat TDTO SAE 30/10W for Challenger tractor transmission, wet-brake, and power-train compartments; improves cold-weather shift performance. |
| Grease (chassis and pivot points) | N/A - serviced per lubrication chart, not a fill capacity | Cat Multipurpose Grease, NLGI Grade 2, for routine chassis, pin, and bushing points. Cat Advanced 3Moly grease recommended for heavily loaded pivot points where specified. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 75E maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the 75E beyond the schedule
Predictive Maintenance & Fluid Analysis
Run Cat S·O·S oil sampling on the 3176C engine, power-shift transmission, and hydraulic system every 250-500 hours to catch turbocharger wear, clutch pack degradation, or hydraulic pump scoring before failure. Track coolant SCA concentration between changes; the 3176C's wet-liner block is sensitive to cavitation erosion if additive levels lapse. Monitor Mobil-Trac tension pressure on the cab display daily. A slow bleed-down often signals a failing nitrogen accumulator or a cracked hydraulic ram seal before the belt itself shows damage.
Corrective & Common Repairs
Common 75E failure points include Mobil-Trac belt cord separation from years of turning-radius stress, bogie wheel and mid-roller bearing wear from mixed-condition fieldwork, and final drive seal leaks at the drive wheel hub. On the 3176C, watch for turbocharger shaft play and injector performance drop as fuel system components age. Hydrostatic steering motor wear shows up as sluggish or uneven turning response; repair before it forces the operator to compensate with track braking, which accelerates belt wear further.
Overhaul & Rebuild Points
Major rebuild triggers on the 75E are the Mobil-Trac undercarriage and the 3176C top end. Budget for full belt replacement plus bogie wheel, mid-roller, and idler reconditioning once wear limits are reached; heavy tillage use shortens this interval versus lighter grain-cart duty. On the engine side, plan a top-end rebuild (liners, pistons, injectors) once compression or blow-by trends drift out of spec; the power-shift transmission's clutch packs are the other high-wear item behind the undercarriage on a machine this age.
Seasonal & Environment Servicing
Before spring fieldwork, inspect Mobil-Trac belts for winter-stored cracking and verify track tension pressure after cold-soak, since rubber contracts and can read low. Check block heater and glow plug/ether-start function on the 3176C for cold starts below freezing. Going into fall storage, run the cooling system with a properly mixed antifreeze/SCA blend, drain the fuel/water separator, and relieve track tension slightly to reduce belt stress during extended standing. Dust and residue buildup around the turbocharger and coolers needs regular clearing in dry harvest conditions.
75E common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 1R-0762 | Filter As-Fuel | Fuel system service | Check fitment → |
| 129-0375 | Bowl As-Water Collection | Fuel system service | Check fitment → |
| 133-5673 | Element | Fuel system service | Check fitment → |
| 122-1674 | Filter Element As-Air | Air intake service | Check fitment → |
| 6I-0273 | Filter Element As-Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
75E fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| E100 | Engine oil pressure fault | Low oil level, failed oil pressure sensor, or worn oil pump on the 3176/3176C engine | Check engine oil level and condition first, then check the oil pressure sensor circuit before replacing parts |
| E110 | Engine coolant temperature fault | Low coolant level, blocked radiator or grille screens, or a failed coolant temperature sensor | Check coolant level and clean radiator/grille screens, then verify the sensor circuit |
| E102 | Turbo boost pressure fault | Restricted air filter, collapsed or leaking intake hose, or a faulty boost pressure sensor | Inspect the air filter and intake ducting for restriction or leaks before checking the sensor |
| E105 | Intake manifold air temperature fault | Restricted radiator airflow or a failed intake air temperature sensor | Clean the radiator and grille screens, then check the sensor wiring |
| E107 | Air intake filter restriction fault | Clogged air filter element or a faulty restriction sensor | Service or replace the air filter, then recheck for the code |
| E168 | Battery/charging system voltage fault | Loose or corroded battery terminals, weak battery, or a charging system fault | Check battery terminal connections and battery condition, then test the charging circuit |
| E190 | Engine speed signal fault | Faulty or misadjusted engine speed/timing sensor, or damaged wiring | Inspect the speed sensor connector and gap, then have the ECM checked if the fault persists |
| E9131-E9136 | Fuel injector fault, one code per cylinder (cylinders 1 through 6) | Injector solenoid open or short circuit, or a failed injector in the HEUI fuel system | Check the injector solenoid wiring and resistance for the flagged cylinder before replacing the injector |
| E9150 / E9151 | Fuel (injection actuation) pressure fault / pressure limiter fault | Pressure regulation problem in the HEUI injection system, often a failing pressure control valve or hydraulic pump | Check fuel and hydraulic oil supply, then have the injection pressure system tested with the engine diagnostic tool |
| E9303 | Cruise control fault | Faulty cruise control switch, wiring, or control input | Check the cruise control switch and wiring, then contact the dealer if the fault persists |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
75E attachments & work tools
Rear three-point hitch
Optional Category IV-N/III hitch with position and draft control. Rated rear lift capacity is about 13,194 lbs (5,984 kg), sized for large mounted tillage and seeding implements in this horsepower class.
Rear PTO
Independent, optional 1000 rpm rear PTO (1-3/8 in / 1.75 in shaft class). Rated at roughly 292 hp claimed output, used for large PTO-driven implements such as forage or tillage equipment matched to the tractor's power class.
Drawbar / pull-type implements
Heavy-duty rear drawbar for pull-type tillage tools, chisel plows, disc rippers, and air drills. Drawbar output is in the 260-266 hp range, reflecting the high sustained pull typical of rubber-track row-crop tractors of this size.
Auxiliary hydraulic remotes
Closed-center hydraulic system with 4 remote valves, about 40 gpm (151 lpm) pump flow at roughly 2,900 psi (200 bar). Powers cylinders on drawn implements such as fold, lift, and depth-control functions on tillage bars and seeding equipment.
Tillage tool bars and disc rippers
This size class is regularly paired with large disc rippers, chisel plows, and tillage tool bars pinned to the drawbar/hitch. Hitch and tongue hardware for these tools is sized for the tractor's high drawbar-pull rating rather than for smaller three-point-only implements.
Track undercarriage / belt width
Rubber track (belt) width options of 25 in and 30 in are documented for this model, affecting ground flotation and footprint when matched to different tillage or field conditions. This is a factory/dealer undercarriage configuration choice rather than a bolt-on work tool.
Towed scraper hitch conversion
Because of its high drawbar pull and low ground pressure, this track-tractor class is commonly fitted with heavy-duty aftermarket drawbar/hitch kits built from structural plate steel to pull towed earthmoving scrapers. These kits replace or reinforce the standard drawbar to handle scraper-class towing loads; verify fit and rating with the kit supplier for the exact serial/configuration.
Front ballast
Front suitcase-style ballast weights are used to balance the tractor when pulling heavy drawn tillage tools or scrapers. Exact weight packages are not factory-documented for this model and should be set per dealer/operator's manual guidance for the implement in use.
All 75E assemblies by section
Every catalogued assembly group for the Caterpillar 75E. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
136-4955 Aftercooler Gp-Air
| 10***82 | Latch As-Enclosure | 4 |
| 13***19 | Plate-Support | 1 |
| 13***21 | Aftercooler As | 1 |
147-6948 Air Cleaner Gp
| 12***74 | Filter Element As-Air; -Air-High Efficiency | 1 |
| 14***48 | Air Cleaner Group | 1 |
| 4P***24 | Seal-O-Ring | 1 |
135-7699 Air Cleaner Gp
| 13***99 | Air Cleaner Group | 1 |
| 14***07 | Plate As | 1 |
| 14***48 | Air Cleaner Group | 1 |
4p-2881 Cartridge Gp-Turbocharger
| 11***30 | Nut-Compressor | 1 |
| 11***46 | Shaft As-Turbine | 1 |
| 4P***81 | Cartridge Group-Turbocharger | 1 |
6i-0153 Dust Ejector Gp
| 5P***97 | Clamp Fumes Disposal | 2 |
| 5P***17 | Hose; 7cm(2.76in) | 0 |
| 6I***53 | Dust Ejector Group | 1 |
136-4294 Extension Gp-Air Cleaner
| 13***61 | Clamp | 2 |
| 13***94 | Extension Group-Air Cleaner | 1 |
| 14***83 | Tube As | 1 |
6i-0138 Extension Gp-Exhaust
| 6I***38 | Extension Group-Exhaust | 1 |
| 6I***39 | Extension-Exhaust | 1 |
| 6V***01 | Nut; (3/8-16-Thd)(Plate To Rh And Lh Bracket As) | 1 |
9u-1690 Indicator Gp-Air Filter Change
| 1W***13 | Indicator-Air Filter Service; (Air Filter) | 1 |
| 5L***33 | Fitting (To Air Cleaner) | 1 |
| 9U***90 | Indicator Group-Filter Change | 1 |
136-5103 Lines Gp-Air
| 11***25 | Hose | 1 |
| 13***03 | Lines Group-Air | 1 |
| 14***53 | Tube-Inlet | 1 |
148-5457 Lines Gp-Air
| 10***25 | Gasket; (Air Inlet Manifold)(Intake Manifold Inlet) | 1 |
| 12***21 | Elbow | 1 |
| 14***06 | Tube-Outlet | 1 |
117-2755 Manifold Gp-Exhaust
| 10***13 | Gasket | 6 |
| 11***15 | Stud-Taperlock; (M10x85-mm Oal) | 12 |
| 11***55 | Manifold Group-Exhaust | 1 |
116-5405 Manifold Gp-Inlet
| 11***05 | Manifold Group-Inlet | 1 |
| 11***06 | Manifold; (Inlet) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
169-0016 Muffler Gp
| 13***08 | Muffler As | 1 |
| 14***69 | Clamp | 1 |
| 16***16 | Muffler Group | 1 |
136-5109 Muffler Gp
| 13***09 | Muffler Group | 1 |
| 14***69 | Clamp | 1 |
| 16***51 | Muffler As | 1 |
136-4835 Turbocharger Gp
| 10***28 | Cover-Compressor | 1 |
| 10***79 | Housing-Turbine | 1 |
| 13***35 | Turbocharger Group | 1 |
133-7027 Turbocharger Gp
| 13***27 | Turbocharger Group | 1 |
| 13***35 | Turbocharger Group | 1 |
| 1P***51 | Gasket; (Turbocharger) | 1 |
Basic Engine
180-1647 Air Compressor Gp -Trailer Brakes
| 14***54 | Seal-O-Ring | 1 |
| 15***76 | Washer; (Contact) | 4 |
| 15***77 | Washer | 4 |
115-9382 Camshaft Gp
| 11***82 | Camshaft Group | 1 |
| 11***59 | Cover | 1 |
| 12***11 | Journal | 1 |
115-2985 Cover Gp-Cylinder Block
| 11***85 | Cover Group-Cylinder Block | 1 |
| 4P***87 | Cover | 1 |
| 6V***50 | Seal-O-Ring (Id=39.34mm) | 1 |
136-4307 Cover Gp-Front Housing
| 13***07 | Cover Group-Front Housing; -Hydraulic Pump Drive | 1 |
| 1H***39 | Packing,Preformed Cover Part Of Kit P/N 4j***80 | 1 |
| 4P***50 | Cover | 1 |
122-0761 Cover Gp-Front Housing
| 06***55 | Seal-O-Ring (Id=47.22mm) | 3 |
| 12***61 | Cover Group-Front Housing | 1 |
| 6V***40 | Bolt (M8x1.25x25mm); (M8x1.25x25-mm) | 2 |
117-2743 Crankshaft Gp
| 11***07 | Plate; (Thrust) | 2 |
| 11***08 | Bearing-Main; (Standard) | 4 |
| 11***09 | Bearing-Main; (Standard) | 3 |
128-0407 Cylinder Block As
| 11***66 | Cap; (Bearing) | 7 |
| 12***07 | Cylinder Block As | 1 |
| 12***16 | Bearing; (Sleeve) | 5 |
144-2958 Cylinder Block As
| 10***60 | Seal; (Liner) | 6 |
| 12***07 | Cylinder Block As | 1 |
| 14***58 | Cylinder Block As | 1 |
148-2095 Cylinder Block As
| 10***60 | Seal; (Liner) | 6 |
| 14***62 | Cylinder Block As | 1 |
| 14***95 | Cylinder Block As | 1 |
200-2054 Cylinder Block As
| 11***66 | Cap; (Bearing) | 7 |
| 17***54 | Bolt-Hex Head; (M16x160mm) | 14 |
| 20***54 | Cylinder Block As | 1 |
148-2062 Cylinder Block As
| 11***66 | Cap; (Bearing) | 7 |
| 12***16 | Bearing; (Sleeve) | 5 |
| 12***17 | Bearing-Sleeve; (Narrow) | 1 |
204-3450 Cylinder Block As
| 10***60 | Seal; (Liner) | 6 |
| 14***25 | Liner-Cylinder Block | 6 |
| 16***63 | Shim-Liner; -Cylinder | 0 |
115-2982 Cylinder Block Gp
| 11***82 | Cylinder Block Group | 1 |
| 14***95 | Cylinder Block As | 1 |
| 1N***99 | Plug-O-Ring; (Straight Thread) | 2 |
179-9459 Cylinder Head As
| 11***02 | Sleeve; (Injector) | 6 |
| 13***06 | Insert-Valve Seat; (Inlet)(Standard) | 12 |
| 14***52 | Insert-Valve Seat; (0.508-mm Os Od)(0.508-mm Os Od) | 12 |
179-9462 Cylinder Head As
| 10***50 | Guide-Valve; (Standard) | 24 |
| 17***59 | Cylinder Head As | 1 |
| 17***62 | Cylinder Head As | 1 |
144-2968 Cylinder Head As
| 10***50 | Guide-Valve; (Standard) | 24 |
| 14***50 | Cylinder Head As | 1 |
| 14***68 | Cylinder Head As | 1 |
148-2150 Cylinder Head As
| 11***02 | Sleeve; (Injector) | 6 |
| 13***97 | Insert-Valve Seat; (Exhaust) | 12 |
| 13***06 | Insert-Valve Seat; (Inlet)(Standard) | 12 |
144-2950 Cylinder Head As
| 11***02 | Sleeve; (Injector) | 6 |
| 13***97 | Insert-Valve Seat; (Exhaust) | 12 |
| 13***06 | Insert-Valve Seat; (Inlet)(Standard) | 12 |
148-2149 Cylinder Head Gp
| 10***50 | Guide-Valve; (Standard) | 24 |
| 10***34 | Guide-Valve; (0.127-mm Os Od) | 0 |
| 10***35 | Guide-Valve; (0.508-mm Os Od) | 0 |
116-1085 Cylinder Head Gp
| 11***85 | Cylinder Head Group | 1 |
| 14***49 | Cylinder Head Group | 1 |
| 18***07 | Gasket As-Cylinder Head | 1 |
144-2967 Cylinder Head Gp
| 10***50 | Guide-Valve; (Standard) | 24 |
| 12***93 | Valve-Exhaust | 12 |
| 14***50 | Cylinder Head As | 1 |
117-2766 Damper Gp
| 11***66 | Damper Group | 1 |
| 13***83 | Bolt-12 Point Head; (M10x1.5x30-mm) | 8 |
| 16***25 | Damper Assem. | 1 |
136-4562 Drive Gp-Fan
| 13***62 | Drive Group-Fan | 1 |
| 13***22 | Bracket As-Fan | 1 |
| 1A***60 | Capscrew, Hex Head (1/2 - 13 X 2 G5); (Hex Head) (1/2-13x2 Gd 8 Z) | 4 |
116-1083 Fastener Gp-Cylinder Head
| 11***83 | Fastener Group-Cylinder Head; (Cylinder Head) | 1 |
| 12***84 | Bolt; (Hex Head) (M16x2x160mm) | 26 |
| 2S***58 | Washer-Hard; (17x29x3-mm Thk)(Engine Brake) | 26 |
117-2771 Fastener Gp-Damper & Pulley
| 11***71 | Fastener Group-Damper & Pulley | 1 |
| 21***85 | Spacer; (10.5-mm Thk) | 1 |
| 8T***81 | Bolt; (M16x2.0x80mm) | 6 |
180-5168 Fastener Gp-Damper & Pulley
| 18***68 | Fastener Group-Damper & Pulley | 1 |
| 5P***47 | Washer (Bracket To Valve Support) | 6 |
| 8T***81 | Bolt; (M16x2.0x80mm) | 6 |
138-2539 Fastener Gp-Front Housing
| 13***39 | Fastener Group-Front Housing | 1 |
| 6V***49 | Nut-Hard; (M12 X 1.75) | 2 |
| 7D***49 | Washer (Flywheel Counter Balance Weight) | 2 |
117-2792 Fastener Gp-Oil Cooler -Engine
| 11***92 | Fastener Group-Oil Cooler; -Engine | 1 |
| 6V***17 | Bolt; (M8x1.25x30-mm)(Location Z) | 1 |
| 9M***74 | Washer-Hard; (8.8x16x2-mm Thk)(Hard) | 1 |
102-3596 Flywheel Gp
| 10***96 | Flywheel Group | 1 |
| 16***24 | Flywheel As | 1 |
| 4N***14 | Gear; (113-Teeth)(Flywheel Starter) | 1 |
117-2750 Gear Gp-Front
| 11***50 | Gear Group-Front | 1 |
| 13***83 | Shaft | 1 |
| 13***86 | Gear As; (Idler) (71 Teeth) | 1 |
117-2775 Housing Gp-Flywheel
| 06***55 | Seal-O-Ring (Id=47.22mm) | 1 |
| 11***75 | Housing Group-Flywheel | 1 |
| 14***73 | Housing-Flywheel, Threaded Tie-Rod, Threaded Tie-Rod; Replaces 421694a1 | 1 |
115-3006 Housing Gp-Front
| 11***06 | Housing Group-Front; (Front) | 1 |
| 11***24 | Gear; (Pump Drive) (34 Teeth) | 1 |
| 13***96 | Housing As; (Front) | 1 |
148-2063 Lifter Gp-Valve -Mechanism
| 0L***26 | Plug -13mm(.512 In.) Outside Dia. | 2 |
| 12***93 | Dowel | 1 |
| 14***63 | Lifter Group-Valve; -Mechanism | 1 |
115-9386 Lifter Gp-Valve -Mechanism
| 0T***00 | Plug (.5625" Diameter) | 2 |
| 11***86 | Lifter Group-Valve; -Mechanism | 1 |
| 11***91 | Shaft As; (Lifter) | 1 |
117-2748 Lifting Gp-Engine
| 11***05 | Plate; (Lifting Eye) | 2 |
| 11***48 | Lifting Group-Engine | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 6 |
137-4982 Mounting Gp-Alternator
| 11***19 | Bracket | 1 |
| 13***42 | Bracket | 1 |
| 13***81 | Bracket | 1 |
148-6726 Mounting Gp-Engine
| 13***78 | Bracket As | 1 |
| 14***26 | Mounting Group-Engine | 1 |
| 16***88 | Angle-Support | 2 |
138-2550 Mounting Gp-Fan Drive
| 12***64 | Stud; (M12x1.75x86.3-mm Oal) | 2 |
| 13***50 | Mounting Group-Fan Drive; (Short) | 1 |
| 5R***37 | Washer; (Seal) (1.27mm Thk) | 2 |
125-8115 Mounting Gp-Fan Drive
| 12***15 | Mounting Group-Fan Drive | 1 |
| 12***16 | Plate As | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 4 |
115-9376 Mounting Gp-Refrigerant Compr
| 11***76 | Mounting Group-Refrigerant Compr | 1 |
116-5408 Mounting Gp-Valve Mechanism
| 11***83 | Fastener Group-Cylinder Head; (Cylinder Head) | 1 |
| 11***08 | Mounting Group-Valve Mechanism | 1 |
| 17***68 | Bridge As-Valve; (Intake) | 12 |
126-0144 Pan Gp-Oil -Engine
| 06***58 | Seal-O-Ring; (Oil Pan Drain Plug) | 2 |
| 10***08 | Gasket; (Oil Pan) | 1 |
| 12***57 | Bell As; (Suction) | 1 |
116-5371 Piston & Rod Gp
| 10***19 | Ring; (Piston) (Intermediate) | 1 |
| 11***71 | Piston & Rod Group | 1 |
| 12***90 | Bearing; (Connecting Rod) (.51mm U.S.) | 1 |
138-2028 Plug Gp-Cylinder Block
| 13***28 | Plug Group-Cylinder Block | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
117-0165 Plug Gp-Cylinder Block
| 11***65 | Plug Group-Cylinder Block; -Oil Gallery, End | 1 |
| 3B***23 | Core Plug--Flywheel Housing Pinion Shaft Hole | 1 |
117-0185 Plug Gp-Cylinder Block
| 11***85 | Plug Group-Cylinder Block; (Cylinder Block) | 1 |
| 6V***89 | Seal-O-Ring (Id=19.18mm) | 1 |
| 9S***06 | Plug (Front 5 Stem Main Control Valve) | 1 |
116-5452 Plug Gp-Front Housing
| 11***52 | Plug Group-Front Housing; (Front Housing) | 1 |
| 8L***86 | Seal-O-Ring (Id=16.36mm); (16.36-mm Id) | 1 |
| 9S***05 | Plug-O-Ring; (Straight Thread O-Ring) | 1 |
135-6058 Pulley Gp-Alternator
| 13***58 | Pulley Group-Alternator | 1 |
| 16***61 | Pulley-Fan | 1 |
| 16***31 | Adapter-Fan | 1 |
100-4384 Pulley Gp-Auxiliary Drive
| 10***84 | Pulley Group-Auxiliary Drive | 1 |
| 10***13 | Pulley-Crankshaft | 1 |
| 5P***47 | Washer (Bracket To Valve Support) | 6 |
138-2579 Pulley Gp-Crankshaft
| 13***95 | Pulley-Crankshaft | 1 |
| 13***79 | Pulley Group-Crankshaft | 1 |
7e-9583 Pulley Gp-Fan Drive
| 13***80 | Pulley | 1 |
| 4N***30 | Vee Belt | 1 |
| 7E***82 | Pulley-Fan Drive; (3-Groove) | 1 |
115-9397 Rocker Arm Gp
| 09***14 | Pin; (Spring) | 1 |
| 11***97 | Rocker Arm Group | 1 |
| 11***98 | Arm; (Valve Rocker) (Exhaust) | 2 |
116-1091 Seal Gp-Crankshaft
| 10***80 | Seal-O-Ring (Id=177.17mm) | 1 |
| 11***91 | Seal Group-Crankshaft; -Single Lip | 1 |
| 16***23 | Cover | 1 |
7e-7673 Support Gp-Engine
| 13***30 | Support As-Front | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 8 |
| 6V***36 | Bolt; (M12x1.75x70-mm) | 8 |
117-2749 Valve Mechanism Gp -Engine
| 10***42 | Base-Valve Mechanism Cover | 1 |
| 10***67 | Pushrod; (Valve) | 12 |
| 10***68 | Pushrod-Injector | 6 |
Braking System
8r-0753 Brake Gp-Caliper
| 1A***58 | Bolt 1.75 In. (44.45 mm) Long | 8 |
| 3V***97 | Bolt; (3/8-16x1-In) | 4 |
| 4V***50 | Seal-Rectangular | 3 |
3w-5071 Brake Gp-Parking
| 0S***73 | Bolt 50.80 mm(2 In.) Long | 2 |
| 1F***50 | Nut Rops Support | 2 |
| 3J***91 | Spring | 1 |
131-5007 Accumulator Gp-Brake
| 03***13 | Screw-Forming; (10-24x0.37-In) | 2 |
| 06***36 | Protector-Gas Valve | 1 |
| 11***00 | Kit-Service; (Brake Accumulator) | 1 |
136-4398 Accumulator Gp-Brake
| 03***13 | Screw-Forming; (10-24x0.37-In) | 2 |
| 06***36 | Protector-Gas Valve | 1 |
| 11***00 | Kit-Service; (Brake Accumulator) | 1 |
198-0873 Brake & Mtg Gp-Service -Brake Steering
| 19***73 | Brake & Mtg Group-Service; -Brake Steering | 1 |
| 19***74 | Disc | 2 |
| 19***75 | Bracket | 4 |
180-1652 Brake Ar-Trailer
| 12***24 | Clamp | 4 |
| 14***82 | Conduit | 1 |
| 14***73 | Bolt | 2 |
8r-8471 Brake Gp
| 1H***34 | Ring-Retaining; (External) | 1 |
| 3B***01 | Pin,Cotter Bolt | 4 |
| 3W***09 | Rod | 2 |
153-2384 Control Gp-Clutch & Brake
| 10***48 | Cable As | 1 |
| 15***84 | Control Group-Clutch & Brake | 1 |
| 1A***21 | Grommet | 1 |
148-3573 Kit-Brake Repair
| 14***73 | Kit-Brake Repair | 1 |
148-3555 Lines Gp-Brake
| 10***73 | Clip | 3 |
| 13***07 | Accumulator Group-Brake | 1 |
| 14***60 | Valve Group-Brake | 1 |
180-1648 Pump & Valve Gp-Brake -Trailer
| 15***76 | Washer; (Contact) | 3 |
| 18***48 | Pump & Valve Group-Brake; -Trailer | 1 |
| 18***22 | Pump; (Antifreeze) | 1 |
180-1649 Tank Gp-Air -Trailer Brakes
| 14***91 | Seal-O-Ring | 2 |
| 15***77 | Washer | 2 |
| 15***26 | Plug-Locking | 1 |
145-9560 Valve Gp-Brake
| 06***34 | Filter Element-Oil; (Brake Valve) | 1 |
| 14***60 | Valve Group-Brake | 1 |
| 14***73 | Kit-Brake Repair | 1 |
Cooling System
115-2990 Cooler Gp-Engine Oil
| 06***40 | Seal-O-Ring (Id=37.69mm) | 2 |
| 10***25 | Gasket | 1 |
| 11***90 | Cooler Group-Engine Oil; (Engine Oil) | 1 |
136-4923 Cooler Gp-Oil
| 13***11 | Seal | 1 |
| 13***15 | Guard-Debris | 1 |
| 13***23 | Cooler Group-Oil | 1 |
136-4881 Cooling Gp-Supplemental
| 13***81 | Cooling Group-Supplemental | 1 |
| 14***08 | Bracket As | 1 |
| 14***09 | Strap As | 2 |
136-4902 Fan Gp-Suction
| 13***02 | Fan Group-Suction | 1 |
| 13***04 | Shield-Fan Blast | 1 |
| 13***79 | Guard As-Fan Lh | 1 |
116-5456 Housing & Regulator Gp -Engine Coolant Temperature
| 11***56 | Housing & Regulator Group; -Engine Coolant Temperature | 1 |
| 11***00 | Housing As-Regulator | 1 |
| 12***11 | Stud; (M8x1.25-Thd)(M8x1.25 Thd Both Ends) | 4 |
117-2783 Lines Gp-Water -Single Thermostat
| 11***56 | Housing & Regulator Group; -Engine Coolant Temperature | 1 |
| 11***83 | Lines Group-Water; -Single Thermostat | 1 |
| 11***97 | Gasket | 4 |
117-2778 Lines Gp-Water -Water Pump Inlet Elbow
| 10***35 | Gasket | 1 |
| 10***85 | Elbow; (Water Pump) | 1 |
| 11***78 | Lines Group-Water; -Water Pump Inlet Elbow | 1 |
116-5460 Lines Gp-Water -Bypass
| 10***08 | Flange | 1 |
| 10***95 | Tube | 1 |
| 11***60 | Lines Group-Water; -Bypass | 1 |
136-4890 Mounting Gp-Radiator
| 11***21 | Seal; (139cm) | 0 |
| 13***90 | Mounting Group-Radiator | 1 |
| 13***99 | Shroud As-Fan | 1 |
117-2789 Plug Gp-Water Lines
| 11***89 | Plug Group-Water Lines; -Engine Oil Cooler | 1 |
| 6V***27 | Seal-O-Ring (Id=8.92mm) | 1 |
| 8T***67 | Plug-Pipe; (Oil Cooler Bonnet Drain) | 1 |
176-7000 Pump Gp-Water
| 10***10 | Gasket | 1 |
| 14***88 | Seal As; (Water Pump) | 1 |
| 17***95 | Cover-Pump | 1 |
117-2674 Pump Gp-Water
| 11***74 | Pump Group-Water | 1 |
| 15***53 | Pump Group-Water; (Water) | 1 |
| 6V***21 | Bolt; (M8x1.25x80-mm) | 2 |
153-8053 Pump Gp-Water
| 10***09 | Impeller; (Pump) | 1 |
| 10***10 | Gasket | 1 |
| 10***12 | Shaft; (Water Pump) | 1 |
136-4886 Radiator Gp
| 13***84 | Tank Group-Coolant | 1 |
| 13***86 | Radiator Group | 1 |
| 13***70 | Channel As | 1 |
136-4895 Radiator Gp
| 13***84 | Tank Group-Coolant | 1 |
| 13***95 | Radiator Group | 1 |
| 13***70 | Channel As | 1 |
136-4884 Tank Gp-Coolant
| 13***84 | Tank Group-Coolant | 1 |
| 13***68 | Tank As-Radiator | 1 |
| 14***52 | Cap-Radiator | 1 |
Differential Steering System
9t-1823 Valve & Mounting Gp
| 1H***23 | Packing,Preformed Part Of Kit P/N 5r***25 | 4 |
| 4D***97 | Seal 15.6 mm(.614 In.) I.D. | 2 |
| 6D***53 | Pin (Spring) | 1 |
136-5515 Control Gp-Steering
| 13***15 | Control Group-Steering | 1 |
| 1F***50 | Nut Rops Support | 2 |
| 21***15 | Kit-Lever | 1 |
148-7024 Control Gp-Steering
| 13***62 | Valve Group-Steering | 1 |
| 13***54 | Hose As | 1 |
| 13***70 | Bracket As | 1 |
198-0885 Control Gp-Steering -Brake
| 14***83 | Rod End-Yoke | 2 |
| 14***84 | Pin | 2 |
| 15***40 | Pin-Cotter | 2 |
110-0256 Lines Gp-Pump
| 10***13 | Valve-Check; (Differential Back Pressure) | 1 |
| 11***52 | Tube As | 1 |
| 11***53 | Tube As | 1 |
148-7254 Lines Gp-Steering
| 10***01 | Angle As | 1 |
| 10***17 | Hose As | 1 |
| 10***11 | Tee-O-Ring | 1 |
198-0892 Lines Gp-Steering -Brake
| 14***80 | Clamp | 3 |
| 14***81 | Block | 3 |
| 15***35 | Clamp-Hose | 1 |
129-1658 Motor Gp-Piston -Steering
| 11***50 | Housing | 1 |
| 11***62 | Head | 1 |
| 12***58 | Motor Group-Piston; -Steering | 1 |
159-7151 Motor Gp-Piston -Steering
| 11***50 | Housing | 1 |
| 11***62 | Head | 1 |
| 15***51 | Motor Group-Piston; -Steering | 1 |
101-0858 Motor Gp-Piston
| 10***58 | Motor Group-Piston | 1 |
| 11***44 | Rotating Group-Motor | 1 |
| 11***50 | Housing | 1 |
159-7152 Motor Gp-Piston
| 11***50 | Housing | 1 |
| 11***62 | Head | 1 |
| 15***52 | Motor Group-Piston | 1 |
135-2853 Planetary Gp-Differential Ster
| 03***35 | Bolt-Self Locking; 2.22cm(.875 In.) Lg | 5 |
| 03***53 | Ring-Retaining | 2 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 8 |
136-4362 Pump & Mtg Gp-Steering
| 12***14 | Pump Group-Gear | 1 |
| 13***62 | Pump & Mtg Group-Steering | 1 |
| 19***15 | Pump Group-Piston | 1 |
121-7514 Pump Gp-Gear
| 12***14 | Pump Group-Gear | 1 |
| 13***51 | Plate-Gear | 1 |
| 13***52 | Flange As | 1 |
156-0928 Pump Gp-Piston
| 07***53 | Pin; (Spring) | 2 |
| 09***39 | Washer; (8.33x15x2.12-mm Thk) | 1 |
| 10***96 | Kit-Manifold | 1 |
198-0915 Pump Gp-Piston
| 07***53 | Pin; (Spring) | 2 |
| 09***39 | Washer; (8.33x15x2.12-mm Thk) | 1 |
| 10***96 | Kit-Manifold | 1 |
137-2670 Pump Gp-Steering
| 07***53 | Pin; (Spring) | 2 |
| 09***08 | Bolt-Socket Head; (M16x2x140-mm) | 4 |
| 09***39 | Washer; (8.33x15x2.12-mm Thk) | 1 |
180-0458 Rotating Gp-Motor
| 11***46 | Valve Group-Flushing; -Differential Steering Motor | 1 |
| 11***87 | Barrel | 1 |
| 11***17 | Screw; (M6x1x16-mm) | 7 |
133-8738 Rotating Gp-Motor
| 11***84 | Shaft-Drive | 1 |
| 11***17 | Screw; (M6x1x16-mm) | 7 |
| 12***99 | Plate-Retaining | 1 |
111-7344 Rotating Gp-Motor
| 11***44 | Rotating Group-Motor | 1 |
| 11***46 | Valve Group-Flushing; -Differential Steering Motor | 1 |
| 11***84 | Shaft-Drive | 1 |
166-7405 Rotating Gp-Motor
| 11***17 | Screw; (M6x1x16-mm) | 7 |
| 12***99 | Plate-Retaining | 1 |
| 13***40 | Valve Group-Flushing | 1 |
198-0872 Steering Ar -Brake
| 19***72 | Steering Ar; -Brake | 1 |
| 19***73 | Brake & Mtg Group-Service; -Brake Steering | 1 |
| 19***85 | Control Group-Steering; -Brake | 1 |
136-4373 Steering Ar-Hydraulic
| 11***64 | Motor & Mounting Group | 1 |
| 13***73 | Steering Ar-Hydraulic | 1 |
| 14***54 | Lines Group-Steering | 1 |
136-4371 Steering Ar-Standard
| 13***48 | Motor & Mounting Group; -Steering | 1 |
| 13***71 | Steering Ar-Standard | 1 |
| 14***54 | Lines Group-Steering | 1 |
161-1082 Valve Gp-Check
| 00***14 | Coupling-Pipe | 1 |
| 16***82 | Valve Group-Check | 1 |
| 16***38 | Valve-Check | 1 |
111-7346 Valve Gp-Flushing
| 11***46 | Valve Group-Flushing; -Differential Steering Motor | 1 |
| 11***88 | Plate | 1 |
| 11***89 | Rod | 1 |
133-8740 Valve Gp-Flushing
| 11***10 | Retainer | 2 |
| 13***40 | Valve Group-Flushing | 1 |
| 6E***02 | Spring | 2 |
135-7462 Valve Gp-Steering
| 09***19 | Ring-Retaining | 1 |
| 12***28 | Slug | 1 |
| 13***62 | Valve Group-Steering | 1 |
Drawbar, Three Point Hitch And Pto
7t-3000 Drive Gp-Power Take-Off
| 0L***58 | Bolt 8.26cm (3.25 In.) Long | 1 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 7 |
3w-5101 Shaft Gp-Power Take-Off
| 05***22 | Seal | 1 |
| 0S***84 | Cap Screw (2 1/4" Long) | 16 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
3w-5023 Frame Gp-Drawbar
| 12***42 | Plate-Wear | 1 |
| 3W***23 | Support Group-Drawbar | 1 |
| 3W***25 | Support As | 1 |
136-5410 Adapter Gp-3 Point Hitch
| 13***10 | Adapter Group-3 Point Hitch | 1 |
| 14***11 | Hose As | 1 |
| 15***46 | Valve Group-Shuttle; (Signal) | 1 |
113-7273 Adapter Gp-Power Take-Off
| 0S***73 | Bolt (102mm Long); (1/2-13x4-In) | 1 |
| 10***01 | Angle As | 1 |
| 11***73 | Adapter Group-Power Take-Off | 1 |
132-4654 Bracket Gp-Shipping
| 13***53 | Plate | 1 |
| 13***54 | Bracket Group-Shipping | 1 |
| 6S***24 | Plug-Protective | 8 |
146-4348 Coupler Gp
| 14***48 | Coupler Group | 1 |
| 14***49 | Body As | 2 |
| 14***50 | Seal | 2 |
104-3055 Coupler Gp-Quick
| 0S***26 | Bolt, Hex. Hd., 3/4in.-10 N.C. X 1 1/2in. | 1 |
| 10***55 | Coupler Group-Quick | 1 |
| 10***63 | Frame As-Coupler | 1 |
197-0485 Coupling Ar -Hydraulic Power Beyond
| 18***61 | Coupling Group | 1 |
| 19***85 | Coupling Ar; -Hydraulic Power Beyond | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 3 |
197-0486 Coupling Ar -Hydraulic Power Beyond
| 18***61 | Coupling Group | 1 |
| 19***86 | Coupling Ar; -Hydraulic Power Beyond | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 3 |
9u-1695 Drawbar Gp-Swinging
| 11***04 | Plate | 1 |
| 12***70 | Drawbar As | 1 |
| 13***29 | Retainer As | 1 |
198-6814 Hitch Ar
| 18***55 | Guard Group-Belt | 1 |
| 19***14 | Hitch Ar | 1 |
| 8C***13 | Washer-Hard; (24x41.5x4-mm Thk) | 16 |
157-3864 Hitch Ar
| 10***55 | Coupler Group-Quick | 1 |
| 11***08 | Hitch Group-3 Point | 1 |
| 13***07 | Sensor Group-Speed | 1 |
136-5529 Hitch Ar
| 10***55 | Coupler Group-Quick | 1 |
| 11***08 | Hitch Group-3 Point | 1 |
| 12***03 | Kit-3-Point Hitch Valve | 1 |
113-7308 Hitch Gp-3 Point
| 10***34 | Shaft As-Rocker Arm | 1 |
| 11***08 | Hitch Group-3 Point | 1 |
| 12***43 | Plate-Wear (Drawbar Support W/Hitch) | 1 |
161-9160 Hitch Ready Ar
| 13***54 | Bracket Group-Shipping | 1 |
| 13***07 | Sensor Group-Speed | 1 |
| 13***75 | Guard Group-Rear | 1 |
157-3866 Hitch Ready Ar
| 13***54 | Bracket Group-Shipping | 1 |
| 13***10 | Adapter Group-3 Point Hitch | 1 |
| 13***75 | Guard Group-Rear | 1 |
161-9159 Hitch Ready Ar
| 13***54 | Bracket Group-Shipping | 1 |
| 13***10 | Adapter Group-3 Point Hitch | 1 |
| 13***75 | Guard Group-Rear | 1 |
204-8062 Kit-3-Point Hitch
| 19***72 | Link Group-Upper | 1 |
| 19***17 | Pin As | 2 |
| 20***10 | Spacer; (17.5x25.4x12.5-mm Thk) | 2 |
124-4803 Kit-3-Point Hitch Valve
| 0S***08 | Bolt-Support To Starting Engine Timing Gear Housing | 3 |
| 10***97 | Cover | 1 |
| 10***89 | Manifold As | 1 |
154-1972 Kit-Power Take-Off
| 11***70 | Control Group-Power Take-Off | 1 |
| 11***71 | Mounting Group-Power Take-Off | 1 |
| 14***08 | Film-Instruction | 1 |
149-1457 Lines Gp-Power Take-Off
| 14***57 | Lines Group-Power Take-Off | 1 |
| 14***58 | Tube As | 1 |
| 15***84 | Hose As | 1 |
4e-7866 Link Gp
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 2 |
| 3W***02 | Pin | 1 |
| 4E***66 | Link Group | 1 |
4e-7872 Link Gp
| 11***26 | Tube As | 1 |
| 11***27 | Hasp | 1 |
| 11***29 | Pin-Linch | 1 |
210-7481 Link Gp-Upper
| 09***45 | Pin-Cotter | 2 |
| 0T***00 | Plug (.5625" Diameter) | 4 |
| 18***69 | Pin | 1 |
193-4472 Link Gp-Upper
| 09***45 | Pin-Cotter | 2 |
| 0T***00 | Plug (.5625" Diameter) | 2 |
| 18***69 | Pin | 1 |
113-7271 Mounting Gp-Power Take-Off
| 06***54 | Tubing | 1 |
| 10***73 | Support | 1 |
| 10***74 | Guard As | 1 |
139-8600 Power Take-Off Ar
| 11***70 | Control Group-Power Take-Off | 1 |
| 11***71 | Mounting Group-Power Take-Off | 1 |
| 13***51 | Transmission Ar; -With Power Take-Off | 1 |
147-9435 Power Take-Off Gp
| 13***12 | Case-Power Take-Off | 1 |
| 14***30 | Gear-Transfer; (20-Teeth) | 1 |
| 14***31 | Gear-Idler; (32-Teeth) | 1 |
211-7920 Shield Gp -Power Take-Off
| 17***45 | Film-Notice; (Rotating Drive Lines) | 2 |
| 19***04 | Shield As; (Italian Market) | 1 |
| 19***55 | Shield As; (Zuidberg Market) | 1 |
Electrical And Starting System
3e-7584 Lamp Gp-Head & Signal
| 10***46 | Lamp; (12-Volt, 4-Watt)(Miniature) | 1 |
| 10***47 | Body As-Lamp | 1 |
| 10***48 | Lens As; (Headlight)(High, Low Beam) | 1 |
3e-7585 Lamp Gp-Head & Signal
| 10***46 | Lamp; (12-Volt, 4-Watt)(Miniature) | 1 |
| 10***47 | Body As-Lamp | 1 |
| 10***49 | Lens As; (Headlight) | 1 |
251-1134 Alarm Gp -Track Recoil
| 03***07 | Terminal-Ring; (0-Ga, 3/8-In Screw) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
225-1254 Alarm Gp
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 13***77 | Splice-Wire | 1 |
125-9597 Alternator Gp-Charging
| 03***12 | Screw-Forming; (10-24x0.5-In) | 3 |
| 12***97 | Alternator Group-Charging; -12-Volt, 145-Ampere | 1 |
| 12***68 | Kit-Alternator Guard | 1 |
136-4564 Alternator Gp-Charging
| 12***97 | Alternator Group-Charging; -12-Volt, 145-Ampere | 1 |
| 13***64 | Alternator Group-Charging | 1 |
| 14***09 | Guard As-Alternator | 1 |
157-2731 Battery & Wiring Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***21 | Battery Group | 2 |
| 12***73 | Cap As-Filler; (Battery) | 6 |
124-2674 Connection Gp-Electrical
| 12***74 | Connection Group-Electrical; -Ground | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 1 |
| 6V***64 | Washer-Hard; (8.8x25.5x5-mm Thk) | 1 |
124-2673 Control & Mtg Gp-Engine Elek
| 11***55 | Control Group-Engine Electronic; (Engine Electronic) | 1 |
| 12***73 | Control & Mtg Group-Engine Elek; (Engine Elek) | 1 |
| 5P***70 | Nut-Hard; (M8 X 1.25) | 1 |
107-3578 Control Gp-Electronic
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 10***78 | Control Group-Electronic | 1 |
| 3E***88 | Receptacle As-Connector; (8-Pin) | 1 |
115-3055 Control Gp-Engine Electronic
| 11***55 | Control Group-Engine Electronic; (Engine Electronic) | 1 |
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
113-7270 Control Gp-Power Take-Off
| 11***70 | Control Group-Power Take-Off | 1 |
| 1P***16 | Seal-O-Ring; (11.63mm Id) | 1 |
| 2D***35 | Locknut (Visor To Bracket) | 1 |
117-2763 Harness As-Engine
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 4 |
| 11***63 | Harness As-Engine; -Electronic Control | 1 |
155-0044 Harness As-Radio -Adapter
| 15***44 | Harness As-Radio; -Adapter | 1 |
136-5589 Harness Gp-Chassis
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***89 | Harness Group-Chassis | 1 |
136-5576 Harness Gp-Console
| 11***90 | Fuse; (10 Amp) | 7 |
| 11***91 | Fuse; (15-Ampere) | 2 |
| 11***92 | Fuse; (20 Amp) | 3 |
136-5575 Harness Gp-Dash
| 11***90 | Fuse; (10 Amp) | 14 |
| 11***91 | Fuse; (15-Ampere) | 8 |
| 11***92 | Fuse; (20 Amp) | 5 |
131-8126 Heater Gp-Jacket Water
| 13***26 | Heater Group-Jacket Water; -120 Volt | 1 |
| 13***27 | Element As-Jacket Water Heater; (120-Volt, 1250-Watt) | 1 |
| 13***17 | Cap As-Dust | 1 |
154-7246 Heater Gp-Jacket Water
| 12***09 | Cord As-Heater Element; -240-Volt | 1 |
| 13***17 | Cap As-Dust | 1 |
| 15***81 | Element As-Jacket Water Heater; (240-Volt, 1250-Watt) | 1 |
128-4098 Kit-Connector
| 12***98 | Kit-Connector | 1 |
8t-8652 Kit-Implement Status Switch
| 1H***38 | Lockwasher, External Tooth (1/4); W/O Freespool Qty Is 6 | 2 |
| 3B***02 | Washer,Lock Circuit Breaker Uoc:Bsv,Bsx | 2 |
| 3T***48 | Clip Assembly - Housing Plug To Housing Recp. | 2 |
155-0014 Lamp Gp -Turn/Marker
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***14 | Lamp Group; -Turn/Marker | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
199-2797 Lamp Gp -Roading
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 19***97 | Lamp Group; -Roading | 1 |
3e-7301 Lamp Gp-Dome -With Switch
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 3E***01 | Lamp Group-Dome; -With Switch | 1 |
9x-7779 Lamp Gp-Flood -Roading Lights
| 10***51 | Screw; (M4x32-mm) | 4 |
| 10***52 | Seal | 1 |
| 10***53 | Lens As; (Floodlight) | 1 |
9x-9484 Lamp Gp-Flood -Roading Lights
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
| 8T***33 | Nut (M10x1.50 Thd) | 1 |
140-2719 Lamp Gp-Head
| 14***19 | Lamp Group-Head | 1 |
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
136-5403 Lamp Gp-Tail -Rh
| 13***03 | Lamp Group-Tail; -Rh | 1 |
| 16***76 | Lamp | 1 |
| 9W***26 | Lamp; (12-Volt, 21-Watt)(Roading Lights) | 2 |
136-5402 Lamp Gp-Tail -Lh
| 13***02 | Lamp Group-Tail; -Lh | 1 |
| 16***76 | Lamp | 1 |
| 9W***26 | Lamp; (12-Volt, 21-Watt)(Roading Lights) | 2 |
128-6985 Lamp Gp-Warning Beacon -Amber, Magnetic Mount, Rotating
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 9R***42 | Plug As | 1 |
| 9R***58 | Cord As | 1 |
160-9941 Lamp Gp-Warning Beacon
| 12***78 | Washer; (16x38x5-mm Thk) | 2 |
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 2 |
| 16***41 | Lamp Group-Warning Beacon | 1 |
199-7127 Lighting Gp -Roading
| 14***35 | Strap-Tie | 20 |
| 15***77 | Washer | 2 |
| 15***78 | Washer | 4 |
157-2726 Lighting Gp-Roading
| 11***86 | Lamp; (12-Volt, 50-Watt) | 3 |
| 12***62 | Harness As; (Atch Lamps) | 4 |
| 13***02 | Lamp Group-Tail; -Lh | 1 |
204-4506 Lighting Gp-Roading
| 14***04 | Strap-Cable | 3 |
| 15***75 | Washer | 1 |
| 20***06 | Lighting Group-Roading | 1 |
157-2728 Lighting Gp-Roading
| 15***28 | Lighting Group-Roading | 1 |
| 3E***84 | Lamp Group-Head & Turn; -Rh | 2 |
| 7K***81 | Strap-Pressure & Return Hoses To | 2 |
157-2727 Lighting Gp-Roading
| 15***27 | Lighting Group-Roading | 1 |
| 3E***85 | Lamp Group-Head & Turn | 2 |
| 7K***81 | Strap-Pressure & Return Hoses To | 2 |
136-5467 Lighting Gp-Warning
| 13***67 | Lighting Group-Warning | 1 |
| 5M***34 | Lamp; (12.8 Volt)(Stoplight-Outside) | 1 |
136-5466 Lighting Gp-Warning
| 13***66 | Lighting Group-Warning | 1 |
| 5M***34 | Lamp; (12.8 Volt)(Stoplight-Outside) | 1 |
146-3503 Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 09***30 | Screw-Machine; (M4x0.07x6-mm) | 1 |
9u-1707 Sensor & Mounting Gp
| 13***79 | Sensor Group-Speed; (Radar) | 1 |
| 18***47 | Spacer; (23mm Lg X 9.24 Id) | 4 |
| 5P***75 | Washer-Hard; (10.2x22.5x3-mm Thk)(Shield To A/C) | 3 |
113-7299 Sensor & Mounting Gp
| 11***99 | Sensor & Mounting Group | 1 |
| 13***75 | Sensor Group-Ground Speed | 1 |
| 18***47 | Spacer; (23mm Lg X 9.24 Id) | 4 |
131-5575 Sensor Gp-Ground Speed
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 13***75 | Sensor Group-Ground Speed | 1 |
| 3E***77 | Wedge-Receptacle Lock; (4-Pin) | 1 |
219-2384 Sensor Gp-Position
| 21***84 | Sensor Group-Position; (Rotary)(Engine Speed) | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
161-8906 Sensor Gp-Position
| 16***06 | Sensor Group-Position; -Accelerator Control | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
194-6722 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
| 19***22 | Sensor Group-Pressure; -Atmospheric Air | 1 |
129-6628 Sensor Gp-Speed
| 10***13 | Seal; (3 Pin Plug) | 1 |
| 12***28 | Sensor Group-Speed; -Engine Speed/Timing | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
189-5746 Sensor Gp-Speed
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***36 | Pin-Connector; (14-Ga To 18-Ga) | 2 |
| 17***49 | Strap; (Marker) | 1 |
136-5507 Sensor Gp-Speed
| 12***33 | Lever As | 1 |
| 12***34 | Rod | 1 |
| 13***07 | Sensor Group-Speed | 1 |
132-4579 Sensor Gp-Speed
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 13***79 | Sensor Group-Speed; (Radar) | 1 |
| 3E***77 | Wedge-Receptacle Lock; (4-Pin) | 1 |
7i-4108 Starting Aid Gp-Ether
| 10***73 | Tube | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***07 | Kit-Connecting Plug; (2-Pin)(Electronic Control) | 1 |
149-5538 Starting Motor Gp-Electric
| 14***38 | Starting Motor Group-Electric | 1 |
| 20***21 | Starting Motor Group-Electric | 1 |
| 4H***69 | Gasket Starter Mtg Part Of Kit P/N 5r***25 | 1 |
207-1521 Starting Motor Gp-Electric
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 09***30 | Screw-Machine; (M4x0.07x6-mm) | 1 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 1 |
136-5555 Wiring Gp-Cab
| 03***83 | Screw-Machine | 20 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 2 |
150-8768 Wiring Gp-Electronic Control
| 10***40 | Sensor Group-Temperature; -Output Transfer Gear Oil | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***08 | Kit; (Connecting Plug) (3 Pin) (Includes Plug As And Wedge) | 1 |
136-5579 Wiring Gp-Machine
| 03***06 | Terminal-Ring; (00-Ga, 1/4-In Screw) | 1 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 10***80 | Switch As-Pressure; (Engine Oil) | 1 |
198-0902 Wiring Gp-Steering -Brake
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 14***35 | Strap-Tie | 10 |
| 15***65 | Grommet | 1 |
117-2760 Wiring Gp-Unit Injector
| 11***60 | Wiring Group-Unit Injector | 1 |
| 2V***16 | Clip; (9.52mm Id) | 4 |
| 4P***37 | Harness Assembly-Wiring; (Unit Injector) | 1 |
Engine Arrangement
138-2546 Bracket Gp-Support
| 13***46 | Bracket Group-Support; -Refrigerant Compressor | 1 |
| 16***80 | Bracket | 1 |
| 6V***22 | Bolt (M10x1.50x35mm) | 2 |
160-8575 Engine Ar-Complete
| 10***96 | Flywheel Group | 1 |
| 11***85 | Cover Group-Cylinder Block | 1 |
| 11***90 | Cooler Group-Engine Oil; (Engine Oil) | 1 |
160-8574 Engine Ar-Core
| 11***82 | Cylinder Block Group | 1 |
| 11***06 | Housing Group-Front; (Front) | 1 |
| 11***82 | Camshaft Group | 1 |
136-5093 Installation Ar-Engine
| 13***58 | Pulley Group-Alternator | 1 |
| 13***99 | Air Cleaner Group | 1 |
| 13***94 | Extension Group-Air Cleaner | 1 |
164-5543 Installation Ar-Engine
| 12***15 | Mounting Group-Fan Drive | 1 |
| 13***62 | Drive Group-Fan | 1 |
| 13***81 | Cooling Group-Supplemental | 1 |
136-5105 Installation Ar-Engine
| 12***15 | Mounting Group-Fan Drive | 1 |
| 13***26 | Heater Group-Jacket Water; -120 Volt | 1 |
| 13***52 | Filter Group-Water Sep & Fuel | 1 |
Frame And Body
141-8887 Bracket Gp
| 14***87 | Bracket Group | 1 |
| 15***55 | Bracket As | 1 |
| 8C***57 | Bolt (3/4-10x2.75in); (3/4-10x2.75-In) | 8 |
141-7215 Counterweight Gp
| 10***18 | Rod | 4 |
| 10***20 | Plate | 2 |
| 11***17 | Plate | 2 |
155-0388 Counterweight Gp
| 15***55 | Plate | 2 |
| 15***88 | Counterweight Group | 1 |
| 5P***35 | Bolt-Plt; (3/4unc X 8) | 2 |
138-7250 Counterweight Gp
| 10***18 | Rod | 4 |
| 10***20 | Plate | 2 |
| 11***17 | Plate | 2 |
141-8880 Counterweight Gp-Rear
| 14***80 | Counterweight Group-Rear | 1 |
| 14***07 | Plate | 13 |
| 14***08 | Plate | 2 |
157-2717 Fender Gp
| 10***36 | Shim; (175mm Lg) | 3 |
| 12***98 | Shim; (230mm Lg) | 1 |
| 13***22 | Plate; (Rh) | 1 |
161-2742 Frame Gp
| 03***35 | Bolt-Self Locking; 2.22cm(.875 In.) Lg | 1 |
| 0S***73 | Bolt (102mm Long); (1/2-13x4-In) | 5 |
| 13***28 | Shield | 2 |
157-2730 Guard Gp
| 15***47 | Trim-Hand Hold | 2 |
| 15***30 | Guard Group | 1 |
| 16***55 | Cover As | 1 |
188-8655 Guard Gp-Belt
| 18***91 | Guard As-Belt; (Center) | 1 |
| 18***55 | Guard Group-Belt | 1 |
| 18***56 | Guard As-Belt; (Rh) | 1 |
136-6075 Guard Gp-Rear
| 13***68 | Guard As | 1 |
| 13***75 | Guard Group-Rear | 1 |
| 16***89 | Bracket As | 1 |
157-2738 Guard Gp-Spectator
| 15***38 | Guard Group-Spectator | 1 |
| 16***71 | Guard As | 1 |
| 8C***36 | Bolt (1/2-13x1.375in); (1/2-13x1.375-In) | 4 |
157-3858 Handrail Gp
| 11***03 | Bumper | 1 |
| 15***91 | Handhold As | 1 |
| 15***58 | Handrail Group | 1 |
198-4797 Handrail Gp
| 15***20 | Bolt | 2 |
| 15***88 | Washer; (10.5-mm) | 8 |
| 17***54 | U-Bolt | 1 |
153-2798 Hood & Guard Gp
| 03***26 | Retainer | 2 |
| 10***36 | Marker-Hood | 1 |
| 11***80 | Latch As | 2 |
161-2108 Mounting Gp-Registration -Rear
| 15***86 | Lamp As; (License) | 2 |
| 16***44 | Bracket As | 1 |
| 16***08 | Mounting Group-Registration; -Rear | 1 |
158-1547 Mounting Gp-Registration -Front
| 15***45 | Plate As | 1 |
| 15***47 | Mounting Group-Registration; -Front | 1 |
| 4L***54 | Capscrew; (3/8-16x21 In) (Gd8) (Hex Hd) (4-Roller) | 4 |
156-6086 Mounting Gp-Tank
| 13***44 | Strap As | 2 |
| 13***45 | Plate | 1 |
| 13***47 | Spacer; (104-mm Lgx31.75 Dia) | 4 |
192-3960 Plate Gp-Skid
| 15***80 | Washer | 8 |
| 19***60 | Plate Group-Skid | 1 |
| 19***61 | Plate As | 2 |
178-6901 Plate Gp-Warning
| 14***26 | Clip | 1 |
| 15***60 | Locknut; (M8) | 23 |
| 15***76 | Washer; (Contact) | 4 |
178-6903 Plate Gp-Warning
| 15***60 | Locknut; (M8) | 12 |
| 15***82 | Washer | 8 |
| 17***07 | Plate-Warning | 1 |
173-8303 Reflector Gp
| 14***71 | Reflector, Ring, Ring; Sealing Ring | 6 |
| 14***73 | Reflector; (Red) | 4 |
| 15***56 | Rivet | 10 |
136-6069 Step Gp
| 12***57 | Step As | 1 |
| 13***69 | Step Group | 1 |
| 13***47 | Handrail As | 1 |
184-3026 Warning Gp-Slow Moving Vehicle
| 13***67 | Bracket As | 1 |
| 18***26 | Warning Group-Slow Moving Vehicle | 1 |
| 4M***81 | Capscrew; (Hex Hd 1/4-20x3/4) (Use W/Spacer 2) | 3 |
Fuel System
136-4885 Condenser & Mtg Gp-Fuel Cooler
| 10***82 | Latch As-Enclosure | 2 |
| 13***85 | Condenser & Mtg Group-Fuel Cooler | 1 |
| 13***03 | Condenser & Fuel Group | 1 |
136-5508 Control Gp-Governor
| 10***93 | Housing | 1 |
| 13***13 | Plate | 1 |
| 13***43 | Pedal As | 1 |
174-3365 Cover Gp-Decelerator
| 15***76 | Washer; (Contact) | 2 |
| 15***77 | Washer | 2 |
| 15***92 | Bolt; (M10x130mm) | 1 |
116-5436 Filter Gp-Fuel
| 11***36 | Filter Group-Fuel; -Secondary | 1 |
| 1R***62 | Filter As-Fuel; (Advanced Efficiency)(Secondary) | 1 |
159-1801 Filter Gp-Water Sep & Fuel
| 13***71 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 15***22 | Bracket As | 1 |
| 15***01 | Filter Group-Water Sep & Fuel | 1 |
136-4552 Filter Gp-Water Sep & Fuel
| 13***71 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 13***52 | Filter Group-Water Sep & Fuel | 1 |
| 1S***94 | Clip-R.H. Side Engine Support | 2 |
133-5671 Filter Gp-Water Sep & Fuel
| 12***75 | Bowl As-Water Collection; (Water Separator, Fuel Filter) | 1 |
| 13***71 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 13***73 | Element; (Filter) (Fuel/Water Separator) (Primary) | 1 |
116-5434 Fitting Gp-Fuel Lines
| 11***34 | Fitting Group-Fuel Lines | 1 |
| 11***35 | Connector | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
117-0183 Fitting Gp-Fuel Lines
| 11***83 | Fitting Group-Fuel Supply; (Supply)(Supply) | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 9X***50 | Connector-O-Ring; (O-Ring Port) | 1 |
136-6063 Lines Gp-Fuel
| 12***09 | Valve-Ball; (Hydraulic Tank Drain) | 1 |
| 13***12 | Hose (Fuel) | 1 |
| 13***38 | Hose (Fuel) | 1 |
116-5400 Lines Gp-Fuel Injection
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 1 |
| 10***06 | Valve-Regulator; (Fuel Lines) | 1 |
| 10***29 | Spring | 1 |
200-6478 Lines Gp-Fuel Injection
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 1 |
| 11***18 | Hose As | 1 |
| 12***79 | Manifold; (Fuel) | 1 |
136-5521 Mounting Gp-Control
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***36 | Plug As-Code; (For 924f Only) | 1 |
| 12***31 | Control Group-3 Point Hitch | 1 |
116-5428 Pump & Mtg Gp-Fuel Transfer
| 09***70 | Washer-Sealing | 2 |
| 11***28 | Pump & Mtg Group-Fuel Transfer; (Fuel Transfer) | 1 |
| 19***82 | Tube As | 1 |
116-5415 Pump Gp-Fuel Injection
| 11***15 | Pump Group-Fuel Injection | 1 |
| 11***84 | Seal-O-Ring; (32.99mm Id) | 1 |
| 15***01 | Bolt; (8x1.25x7-mm)(M8x1.25x70mm) | 1 |
116-5411 Pump Gp-Fuel Priming -Hand
| 10***08 | Pump As; (Fuel Priming) | 1 |
| 11***11 | Pump Group-Fuel Priming; -Hand | 1 |
| 1P***36 | Gasket; (Fuel Priming Pump)(Fuel Priming Pump) | 1 |
9p-7121 Strainer-Fuel -Tank
| 9P***21 | Strainer-Fuel; (Fuel Tank) | 1 |
148-3583 Tank Gp-Fuel
| 00***90 | Elbow | 1 |
| 10***09 | Cap As-Filler; (Fast Fill Fuel) | 1 |
| 13***42 | Tank-Fuel; (Lh) | 1 |
281-2725 Valve Gp-Check -Fuel
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 28***25 | Valve Group-Check; -Fuel | 1 |
| 6V***23 | Ring; (Backup) (13.16mm Id) | 1 |
233-6742 Valve Gp-Check -Fuel
| 23***42 | Valve Group-Check; -Fuel Filter | 1 |
| 28***25 | Valve Group-Check; -Fuel | 1 |
| 6V***89 | Seal-O-Ring (Id=19.18mm) | 1 |
238-0296 Valve Gp-Check -Fuel
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 23***96 | Valve Group-Check; -Fuel Filter | 1 |
| 6V***23 | Ring; (Backup) (13.16mm Id) | 1 |
Hydraulic System
9t-9517 Cylinder Gp-Lift
| 16***95 | Seal As-Buffer | 1 |
| 16***04 | Seal-U-Cup | 1 |
| 16***57 | Seal-Wiper | 1 |
173-6971 Valve Gp-Control
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 2 |
| 12***76 | Seat As-Shuttle | 1 |
| 12***96 | Valve Group-Check; (Primary Resolver) | 1 |
151-4998 Valve Gp-Control
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 2 |
| 12***76 | Seat As-Shuttle | 1 |
| 12***96 | Valve Group-Check; (Primary Resolver) | 1 |
180-1651 Valve Gp-Control -Trailer Brakes
| 15***77 | Washer | 2 |
| 17***05 | Connector As; (Quick) | 1 |
| 17***06 | Connector As; (Quick) | 1 |
9t-1799 Valve Gp-Control
| 10***15 | Valve Group-Solenoid | 1 |
| 2K***98 | Seal-O-Ring | 2 |
| 2K***99 | Seal-Interface Between Inlet Manifold | 2 |
180-1650 Valve Gp-Control -Trailer Brakes
| 14***84 | Ball Joint | 1 |
| 15***52 | Seal-O-Ring | 1 |
| 15***71 | Bolt | 2 |
9t-1819 Valve Gp-Relief
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 4K***88 | Seal; Adapter To Oil Pump Outlet Manifold | 1 |
| 4T***43 | Valve | 1 |
186-0961 Coupling Gp
| 15***78 | Washer | 2 |
| 17***39 | Coupling Group | 1 |
| 18***13 | Bolt | 1 |
152-4216 Detent Gp-Control Valve
| 10***71 | Housing | 1 |
| 15***16 | Detent Group-Control Valve | 1 |
| 22***54 | Plug-Orifice | 1 |
203-6653 Filter & Mtg Gp-Case Drain
| 14***67 | Elbow Group; (Each Includes) | 1 |
| 14***77 | Elbow As. | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
136-4360 Filter & Mtg Gp-Hydraulic
| 13***60 | Filter Group-Oil; -Steering | 1 |
| 13***61 | Filter Group-Oil; -Transmission | 1 |
| 13***60 | Filter & Mtg Group-Hydraulic | 1 |
197-2052 Filter Gp-Oil -Hydraulic
| 07***92 | Filter-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
| 19***52 | Filter Group-Oil; -Hydraulic | 1 |
136-0460 Filter Gp-Oil -Steering
| 13***60 | Filter Group-Oil; -Steering | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
136-0461 Filter Gp-Oil -Transmission
| 13***61 | Filter Group-Oil; -Transmission | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 9S***91 | Plug,Machine Thread Fuel Injection Pump | 1 |
147-8342 Filter Gp-Oil -Implement
| 10***53 | Filter-Oil; (Advanced Efficiency) | 1 |
| 13***14 | Filter As-Hydraulic; (Steering)(Fire Resistant Fluid) | 1 |
| 14***42 | Filter Group-Oil; -Implement | 1 |
136-4358 Hydraulic Ar
| 13***58 | Hydraulic Ar | 1 |
| 13***60 | Filter & Mtg Group-Hydraulic | 1 |
| 13***62 | Pump & Mtg Group-Steering | 1 |
161-6399 Lines Gp-Hydraulic
| 10***05 | Tee-O-Ring | 2 |
| 11***94 | Hose As | 1 |
| 11***99 | Hose As | 1 |
148-7006 Lines Gp-Hydraulic
| 10***05 | Tee-O-Ring | 2 |
| 11***94 | Hose As | 1 |
| 11***99 | Hose As | 1 |
145-9564 Lines Gp-Hydraulic
| 10***45 | Hose As | 2 |
| 10***51 | Bracket | 1 |
| 10***52 | Bracket | 1 |
161-9012 Lines Gp-Hydraulic
| 12***83 | Tube As | 1 |
| 14***11 | Hose As | 1 |
| 14***51 | Hose As | 1 |
139-1261 Lines Gp-Hydraulic
| 13***54 | Hose As | 1 |
| 13***61 | Lines Group-Hydraulic | 1 |
| 14***48 | Coupler Group | 4 |
145-9544 Lines Gp-Hydraulic
| 13***54 | Hose As | 1 |
| 14***44 | Lines Group-Hydraulic | 1 |
| 14***48 | Coupler Group | 4 |
206-8812 Lines Gp-Hydraulic Drain -Motor With 3 Point Hitch
| 14***97 | Plate | 1 |
| 14***62 | Clamp | 1 |
| 14***04 | Strap-Cable | 2 |
206-8813 Lines Gp-Hydraulic Drain -Motor Without 3 Point Hitch
| 14***04 | Strap-Cable | 2 |
| 15***77 | Washer | 1 |
| 18***55 | Bolt | 1 |
113-7264 Motor & Mounting Gp
| 11***64 | Motor & Mounting Group | 1 |
| 15***52 | Motor Group-Piston | 1 |
| 4K***75 | Bolt-12 Point Head 38.1mm (1.501in) Long | 4 |
130-8448 Motor & Mounting Gp -Steering
| 13***48 | Motor & Mounting Group; -Steering | 1 |
| 15***51 | Motor Group-Piston; -Steering | 1 |
| 4K***75 | Bolt-12 Point Head 38.1mm (1.501in) Long | 4 |
148-0891 Mounting Gp-Valve
| 10***18 | Housing, Angle As | 1 |
| 10***72 | Angle As | 1 |
| 14***03 | Bracket As | 1 |
136-4394 Pump & Mtg Gp-Hydraulic
| 13***94 | Pump & Mtg Group-Hydraulic | 1 |
| 15***44 | Pump Group-Piston; -Hydraulic | 1 |
| 15***22 | Pump Group-Piston | 1 |
156-8044 Pump Gp-Piston -Hydraulic
| 00***69 | Cup-Roller Bearing | 1 |
| 00***71 | Cone-Bearing | 1 |
| 00***14 | Ring-Retaining; (Internal) | 1 |
158-0522 Pump Gp-Piston
| 08***19 | Pin | 1 |
| 10***85 | Bolt-Socket Head | 4 |
| 11***01 | Seal (Rear Pump To Center Pump) | 1 |
264-5143 Rotating Gp-Pump
| 16***78 | Bearing-Spherical | 1 |
| 16***79 | Pin | 3 |
| 16***80 | Barrel-Cylinder | 1 |
145-8830 Rotating Gp-Pump
| 00***55 | Ring-Retaining | 1 |
| 14***24 | Piston As-Pump | 9 |
| 14***27 | Barrel-Cylinder | 1 |
136-6073 Tank Gp-Hydraulic
| 13***73 | Tank Group-Hydraulic | 1 |
| 13***58 | Tank As-Hydraulic | 1 |
| 13***42 | Gauge-Sight | 1 |
203-6043 Valve & Lines Gp-Load Control -Implement Load Control
| 12***84 | Ring-Backup | 1 |
| 12***85 | Ring-Backup | 1 |
| 14***27 | Bolt-Hex Head; (3/8-16x2.5 In) | 1 |
8j-6875 Valve Gp-Shuttle
| 2M***80 | Seal--To Connector Pump Outlet | 2 |
| 4B***84 | Ball | 1 |
| 4T***05 | Adapter | 2 |
112-4544 Valve Gp-Bank
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 4 |
| 11***27 | Valve Group-Selector & Press Cont | 1 |
| 11***30 | Valve Group-Pressure Control | 1 |
173-6969 Valve Gp-Bank
| 10***18 | Cover-End | 1 |
| 10***62 | Cover-Inlet | 1 |
| 17***69 | Valve Group-Bank | 1 |
173-6970 Valve Gp-Bank 4
| 10***89 | Manifold As | 1 |
| 10***62 | Cover-Inlet | 1 |
| 17***70 | Valve Group-Bank 4 | 1 |
152-2137 Valve Gp-Bank 4
| 10***89 | Manifold As | 1 |
| 10***62 | Cover-Inlet | 1 |
| 15***98 | Valve Group-Control | 4 |
152-2136 Valve Gp-Bank 4
| 10***18 | Cover-End | 1 |
| 10***62 | Cover-Inlet | 1 |
| 15***98 | Valve Group-Control | 4 |
173-6972 Valve Gp-Bank 5
| 10***97 | Cover | 1 |
| 17***70 | Valve Group-Bank 4 | 1 |
| 17***72 | Valve Group-Bank 5 | 1 |
152-2138 Valve Gp-Bank 5
| 10***97 | Cover | 1 |
| 15***37 | Valve Group-Bank 4 | 1 |
| 15***38 | Valve Group-Bank 5 | 1 |
4t-4273 Valve Gp-Breaker Relief
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
| 4T***45 | Valve-Breaker Relief | 1 |
| 4T***73 | Valve Group-Breaker Relief | 1 |
173-2075 Valve Gp-Diverter
| 17***75 | Valve Group-Diverter | 1 |
| 17***34 | Plug-Orifice | 2 |
| 17***35 | Spring | 1 |
168-2210 Valve Gp-Pump Control -Pressure, Flow Compensator
| 03***43 | Seal-O-Ring | 1 |
| 10***45 | Valve-Orifice; (Hydraulic Oil Check) | 1 |
| 16***10 | Valve Group-Pump Control; -Pressure, Flow Compensator-Hydraulic Oil Clg Fan Piston Pump | 1 |
6e-6568 Valve Gp-Pump Control
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 03***36 | Seal-O-Ring | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 3 |
152-2646 Valve Gp-Shuttle
| 12***98 | Seat | 1 |
| 12***99 | Seat | 1 |
| 13***49 | Connector | 1 |
100-3915 Valve Gp-Solenoid
| 09***33 | Bolt-Socket Head; (M5x0.8x20-mm) | 8 |
| 10***15 | Valve Group-Solenoid | 1 |
| 10***16 | Solenoid As-Bidirectional | 1 |
Lubrication System
166-1329 Base Gp-Oil Filter -Engine
| 11***45 | Valve-Pump Bypass; (Engine Oil Filter) | 1 |
| 16***28 | Base Assem. | 1 |
| 16***29 | Base Group-Oil Filter; -Engine | 1 |
122-0725 Base Gp-Oil Filter -Engine
| 11***45 | Valve-Pump Bypass; (Engine Oil Filter) | 1 |
| 12***25 | Base Group-Oil Filter; -Engine | 1 |
| 12***26 | Base As; (Oil Filter) | 1 |
117-2786 Cover Gp-Oil Filter Base -Engine
| 11***86 | Cover Group-Oil Filter Base; -Engine | 1 |
| 5S***34 | Seal-O-Ring; (97.79mm Id) | 1 |
| 7C***42 | Cover; (Filter Base) | 1 |
143-2655 Filler Gp-Engine Oil
| 03***49 | Nut-Self Lock; (No.10.Unc) | 1 |
| 06***08 | . Bolt; Socket, Clamp-Tubing | 1 |
| 12***81 | Seal-Integral; (Air Compressor Mounting) | 1 |
117-2751 Filter Gp-Engine Oil
| 11***51 | Filter Group-Engine Oil | 1 |
| 13***45 | Bolt-Hex Head; (M10x1.50x30) | 6 |
| 16***29 | Base Group-Oil Filter; -Engine | 1 |
123-0783 Valve Gp-Fluid Sampling
| 12***83 | Fitting Group-Fuel Lines; -Fuel | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 6V***52 | Cap-Dust; (Fuel Supply Tee Connection) | 1 |
154-6835 Fumes Disposal Gp
| 12***46 | Hose-Fumes Disposal | 1 |
| 15***35 | Fumes Disposal Group | 1 |
| 2S***53 | Clip; (34.92mm Id) | 1 |
143-2656 Gauge Gp-Oil Level (Dipstick) -Engine
| 12***19 | Gauge As-Oil Level (Dipstick) | 1 |
| 14***54 | Tube As-Gauge Guide | 1 |
| 14***56 | Gauge Group-Oil Level (Dipstick); -Engine | 1 |
129-2855 Lines Gp-Turbocharger Oil
| 11***87 | Seal-O-Ring (23.16 mm Id) | 1 |
| 11***42 | Adapter | 1 |
| 12***55 | Lines Group-Turbocharger Oil | 1 |
233-5220 Pump Gp-Engine Oil
| 23***20 | Pump Group-Engine Oil | 1 |
| 6D***46 | Seal-O-Ring (Id=101.27mm) | 1 |
| 6V***17 | Bolt; (M8x1.25x30-mm)(Location Z) | 4 |
117-2746 Pump Gp-Engine Oil
| 06***61 | Seal-O-Ring (Id=40.87mm) | 1 |
| 11***03 | Tube Assem. | 1 |
| 11***46 | Pump Group-Engine Oil | 1 |
138-2535 Valve Gp-Fluid Sampling -Engine Oil
| 13***35 | Valve Group-Fluid Sampling; -Engine Oil | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
| 5P***17 | Adapter- To Logic Valve 1u***59 | 1 |
Machine Arrangement
157-2715 Base Common Ar
| 13***58 | Hydraulic Ar | 1 |
| 13***63 | Power Train Ar | 1 |
| 15***15 | Base Common Ar | 1 |
157-2710 Base Unit Ar
| 11***56 | Lines Group-Pump | 1 |
| 13***53 | Planetary Group-Differential Ster | 1 |
| 13***93 | Installation Ar-Engine | 1 |
157-3857 Certification Ar
| 10***95 | Visor Group-Cab | 1 |
| 13***80 | Support-Speaker | 1 |
| 13***39 | Speaker Group-Radio | 1 |
199-5521 Certification Ar
| 19***72 | Steering Ar; -Brake | 1 |
| 19***21 | Certification Ar | 1 |
| 19***27 | Lighting Group; -Roading | 1 |
157-3856 Chassis Ar
| 13***35 | Lines Group-Air Conditioner | 1 |
| 13***90 | Washer Group-Window | 1 |
| 13***79 | Wiring Group-Machine | 1 |
157-2719 Configuration Ar
| 10***95 | Visor Group-Cab | 1 |
| 13***80 | Support-Speaker | 1 |
| 13***39 | Speaker Group-Radio | 1 |
139-8598 Configuration Ar-Without Pto
| 11***73 | Adapter Group-Power Take-Off | 1 |
| 13***50 | Transmission Ar; -Without Power Take-Off | 1 |
| 13***98 | Configuration Ar-Without Power Take-Off | 1 |
157-3848 Special Ar-Standard
| 13***71 | Steering Ar-Standard | 1 |
| 13***86 | Radiator Group | 1 |
| 13***05 | Plate & Film Group | 1 |
157-3863 Special Ar-Without Hitch
| 13***10 | Adapter Group-3 Point Hitch | 1 |
| 13***75 | Guard Group-Rear | 1 |
| 14***44 | Lines Group-Hydraulic | 1 |
Operator Station
139-0719 Air Conditioner Gp
| 03***26 | Retainer | 1 |
| 03***38 | Clamp | 2 |
| 10***43 | Plate-Orifice | 2 |
157-3867 Cab Gp
| 13***00 | Cab Group | 1 |
| 13***08 | Control Group-Governor | 1 |
| 13***10 | Control Group-Transmission | 1 |
157-3868 Cab Gp
| 13***00 | Cab Group | 1 |
| 13***08 | Control Group-Governor | 1 |
| 13***10 | Control Group-Transmission | 1 |
136-5500 Cab Gp
| 09***55 | Clip | 2 |
| 11***60 | Bumper-Rubber | 35 |
| 12***07 | Button As | 4 |
3e-1908 Compressor Gp-Refrigerant
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 2 |
| 31***18 | Valve As-Pressure Relief; (Refrigerant Compressor) | 1 |
136-5113 Compressor Gp-Refrigerant
| 11***13 | Guard As | 1 |
| 13***13 | Compressor Group-Refrigerant | 1 |
| 15***77 | Bolt-Hex Head; (M12x1.75x140mm) | 2 |
136-5512 Control Gp-Hydraulic Hand
| 13***47 | Lever | 1 |
| 13***48 | Lever | 1 |
| 13***49 | Lever | 1 |
171-2090 Control Gp-Monitor -English/German
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***31 | Kit-Bracket & Cover; -Cat Id Display | 1 |
| 17***88 | Control Group-Display Eprom; (Cat Id-English, German) | 1 |
171-2089 Control Gp-Monitor -English/Spanish
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***31 | Kit-Bracket & Cover; -Cat Id Display | 1 |
| 17***87 | Control Group-Display Eprom; (Cat Id-English, Spanish) | 0 |
136-5510 Control Gp-Transmission
| 03***17 | Bolt-Self Locking; (1/4-20x.88in) | 2 |
| 12***45 | Handhold | 1 |
| 12***46 | Gate | 1 |
136-5519 Cover Gp-Dash
| 13***66 | Insulation-Dash | 1 |
| 13***48 | Cover-Dash | 1 |
| 13***19 | Cover Group-Dash | 1 |
188-2928 Display Gp-Cat Id -English/Spanish
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***31 | Kit-Bracket & Cover; -Cat Id Display | 1 |
| 17***87 | Control Group-Display Eprom; (Cat Id-English, Spanish) | 0 |
136-5292 Door Gp-Cab
| 11***49 | Handle As | 1 |
| 13***14 | Hinge As | 1 |
| 13***69 | Frame As-Door | 1 |
136-5520 Duct & Control Gp
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 4 |
| 13***18 | Duct | 1 |
| 13***20 | Duct & Control Group | 1 |
136-5222 Frame Gp-Window -Rear
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 09***53 | Washer, Tooth | 2 |
| 13***09 | Frame As | 1 |
108-4229 Horn Gp-Electric
| 10***29 | Horn Group-Electric | 1 |
| 10***75 | Horn As | 1 |
| 5T***04 | Wire Assem. | 2 |
157-3851 Installation Gp-Cab
| 03***38 | Screw; (6-32x1.0in) | 2 |
| 03***12 | Screw-Forming; (10-24x0.5-In) | 2 |
| 03***17 | Bolt-Self Locking; (1/4-20x.88in) | 1 |
136-5513 Installation Gp-Cab
| 10***25 | Screw-Machine; (8-32x1-In) | 16 |
| 10***02 | Bracket | 1 |
| 13***14 | Speaker As | 2 |
136-5581 Kit-Radio
| 13***40 | Radio Group | 1 |
| 13***81 | Kit-Radio | 1 |
136-5582 Kit-Radio
| 10***82 | Sleeve | 1 |
| 13***90 | Bushing; (Radio Mount) | 1 |
| 13***91 | Harness As-Radio | 1 |
136-5328 Liner As-Cab
| 10***25 | Screw-Machine; (8-32x1-In) | 8 |
| 10***01 | Nut-Clip | 21 |
| 13***28 | Liner As-Cab | 1 |
136-4935 Lines Gp-Air Conditioner
| 13***06 | Hose | 1 |
| 13***07 | Hose | 1 |
| 13***08 | Tube | 1 |
164-1959 Mirror Gp-Rear View
| 16***55 | Mirror As | 1 |
| 16***57 | Arm As-Rh | 1 |
| 16***58 | Arm As-Lh | 1 |
201-8336 Mirror Gp-Rear View
| 14***71 | Switch As-Rocker; (14-Volt, Sealed, Illuminated)(Heated Mirrors) | 1 |
| 14***04 | Actuator-Rocker | 1 |
| 14***49 | Switch; (12-Volt)(Electric Mirror Adjustment) | 1 |
204-4480 Mirror Gp-Rear View
| 14***71 | Switch As-Rocker; (14-Volt, Sealed, Illuminated)(Heated Mirrors) | 1 |
| 14***04 | Actuator-Rocker | 1 |
| 14***49 | Switch; (12-Volt)(Electric Mirror Adjustment) | 1 |
204-4479 Mirror Gp-Rear View
| 14***71 | Switch As-Rocker; (14-Volt, Sealed, Illuminated)(Heated Mirrors) | 1 |
| 14***04 | Actuator-Rocker | 1 |
| 14***49 | Switch; (12-Volt)(Electric Mirror Adjustment) | 1 |
173-1411 Mirror Gp-Rear View
| 16***55 | Mirror As | 2 |
| 16***57 | Arm As-Rh | 1 |
| 17***21 | Mirror As; (Standard) | 2 |
204-4478 Mirror Gp-Rear View
| 14***71 | Switch As-Rocker; (14-Volt, Sealed, Illuminated)(Heated Mirrors) | 1 |
| 14***04 | Actuator-Rocker | 1 |
| 14***49 | Switch; (12-Volt)(Electric Mirror Adjustment) | 1 |
136-5587 Monitor Ar-Machine Performance
| 11***99 | Sensor & Mounting Group | 1 |
| 13***87 | Monitor Ar-Machine Performance | 1 |
| 14***30 | Control Group-Machine Performance | 1 |
136-5586 Monitor Ar-Machine Performance
| 13***86 | Monitor Ar-Machine Performance | 1 |
| 14***31 | Control Group-Monitor Electronic | 1 |
| 9U***07 | Sensor & Mounting Group | 1 |
208-8087 Mounting Gp-Fire Extinguisher
| 15***60 | Locknut; (M8) | 2 |
| 15***76 | Washer; (Contact) | 2 |
| 18***48 | Fire Extinguisher | 1 |
208-8086 Mounting Gp-Fire Extinguisher
| 15***60 | Locknut; (M8) | 2 |
| 15***76 | Washer; (Contact) | 2 |
| 18***47 | Fire Extinguisher | 1 |
208-8084 Mounting Gp-Fire Extinguisher
| 15***60 | Locknut; (M8) | 2 |
| 15***76 | Washer; (Contact) | 2 |
| 18***45 | Fire Extinguisher | 1 |
208-8085 Mounting Gp-Fire Extinguisher
| 15***60 | Locknut; (M8) | 2 |
| 15***76 | Washer; (Contact) | 2 |
| 18***46 | Fire Extinguisher | 1 |
208-8083 Mounting Gp-Fire Extinguisher
| 15***60 | Locknut; (M8) | 2 |
| 15***76 | Washer; (Contact) | 2 |
| 18***44 | Fire Extinguisher | 1 |
164-3993 Mounting Gp-Mirror & Beacon
| 12***78 | Washer; (16x38x5-mm Thk) | 2 |
| 16***83 | Mount As | 1 |
| 16***93 | Mounting Group-Mirror & Beacon | 1 |
136-5518 Panel Gp-Instrument
| 12***07 | Panel As | 1 |
| 13***36 | Film-Dash | 1 |
| 13***37 | Panel As | 1 |
136-5543 Player Gp-Compact Disc
| 13***99 | Harness As | 1 |
| 13***48 | Harness As | 1 |
| 13***43 | Player Group-Compact Disc | 1 |
136-5542 Radio Gp
| 10***82 | Sleeve | 1 |
| 13***90 | Bushing; (Radio Mount) | 1 |
| 13***42 | Radio Group | 1 |
136-5583 Radio Gp
| 13***99 | Harness As | 1 |
| 13***48 | Harness As | 1 |
| 13***43 | Player Group-Compact Disc | 1 |
136-5540 Radio Gp
| 10***82 | Sleeve | 1 |
| 13***90 | Bushing; (Radio Mount) | 1 |
| 13***40 | Radio Group | 1 |
142-9806 Roof Gp-Cab
| 12***78 | Washer; (16x38x5-mm Thk) | 4 |
| 14***06 | Roof Group-Cab | 1 |
| 15***33 | Screw-Washer Hd | 6 |
136-5411 Seat Gp
| 11***20 | Kit-Wiring Harness Service | 1 |
| 11***21 | Kit-Air Spring | 1 |
| 11***22 | Absorber As-Shock | 1 |
136-5360 Seat Gp-Companion
| 13***53 | Seat Belt As | 1 |
| 13***59 | Support As | 1 |
| 13***60 | Seat Group-Companion | 1 |
161-4411 Seat Gp-Suspension
| 11***28 | Bracket As | 1 |
| 13***11 | Seat Group | 1 |
| 16***10 | Spacer | 2 |
136-5539 Speaker Gp-Radio
| 13***33 | Speaker As | 2 |
| 13***39 | Knob | 1 |
| 13***80 | Support-Speaker | 1 |
150-9222 Support Gp-Monitor
| 15***59 | Bracket | 1 |
| 15***60 | Support | 2 |
| 15***22 | Support Group-Monitor | 1 |
105-4895 Visor Gp-Cab
| 09***14 | Spacer | 1 |
| 10***95 | Visor Group-Cab | 1 |
| 11***83 | Bracket | 1 |
104-5687 Voltmeter Gp
| 10***87 | Voltmeter Group; (12-Volt) | 1 |
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 2 |
| 4B***43 | Nut,Plain,Hexagon Plate Mtg | 2 |
136-5390 Washer Gp-Window
| 10***19 | Pump As-Washer | 2 |
| 12***18 | Seal; (1000-cm) | 0 |
| 13***90 | Washer Group-Window | 1 |
136-5516 Wiper Gp-Window
| 13***94 | Nozzle As-Washer | 1 |
| 13***44 | Bracket; (Front) | 1 |
| 13***76 | Arm As | 2 |
Power Train
9w-0342 Actuator Gp-Rotary
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 9 |
| 1B***14 | Cap Screw--Pipe To Carburetor | 2 |
| 2H***65 | Pin (Spring) | 1 |
7t-7990 Pump Gp-Gear
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 2 |
| 1H***96 | Packing,Preformed Cartridge Part Of Kit P/N 4j***80 | 1 |
| 2K***57 | Seal-O-Ring (148.82mm Id) | 1 |
7t-7953 Pump Gp-Gear
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 4 |
| 15***73 | Body As-Oil Pump | 1 |
3w-5032 Support Gp-Transmission
| 1D***15 | Bolt 139.70 mm(5.50 In.) Long | 4 |
| 1P***51 | Plug-Seal | 3 |
| 2J***06 | Nut Front Support To Frame; Nut-Front Support To Frame | 2 |
8y-1293 Universal Joint Gp
| 0S***04 | Bolt (1/2-20x2.5in); (1/2-20x2.5-In) | 8 |
| 13***97 | Seal | 0 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
9w-0664 Valve Gp-Modulating
| 6T***39 | Valve Group-Modulating | 1 |
| 8M***35 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
| 8M***43 | Seal (1.734" Inside Diameter) | 1 |
6y-0185 Valve Gp-Modulating
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 2 |
| 1S***36 | Retainer | 1 |
| 2D***42 | Ball 6.35 mm(.25 In.)Diameter | 1 |
6t-4739 Valve Gp-Modulating
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 3 |
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 2 |
| 1P***66 | Cover | 1 |
149-6328 Case & Parts Gp-Transmission -With Power Take-Off
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 10 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
149-6329 Case & Parts Gp-Transmission -Without Power Take-Off
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 10 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
6i-8630 Clutch Gp
| 05***94 | Bolt-12 Point Head; (3/8-16x1.75-In) | 24 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 12 |
| 13***16 | Hub-Clutch | 1 |
136-1048 Clutch Gp
| 0L***58 | Bolt 8.26cm (3.25 In.) Long | 1 |
| 13***94 | Gear; (36-Teeth) | 1 |
| 13***16 | Hub-Clutch | 2 |
140-1315 Control Gp-Transmission Hyd
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 1 |
| 11***44 | Valve Group-Bank | 1 |
149-6335 Cover Gp-Shipping -With Power Take-Off
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
149-6337 Cover Gp-Shipping -Without Power Take-Off
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 8 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
6i-8632 Drive Gp-Pump -Transmission
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 4 |
| 1A***60 | Capscrew, Hex Head (1/2 - 13 X 2 G5); (Hex Head) (1/2-13x2 Gd 8 Z) | 3 |
| 1S***82 | Coupling | 1 |
136-1042 Drive Gp-Pump -Steering
| 13***40 | Gear; (39 Teeth) | 1 |
| 13***42 | Drive Group-Pump; -Steering | 1 |
| 2S***29 | Ball Bearing | 1 |
136-6074 Filler Gp-Power Train Oil
| 06***97 | Cap-Oil Filler; (Engine Oil) | 1 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 6 |
| 10***37 | Cap-Breather | 1 |
138-4274 Final Drive Gp
| 03***35 | Bolt-Self Locking; 2.22cm(.875 In.) Lg | 8 |
| 13***71 | Case-Final Drive | 2 |
| 13***73 | Retainer | 2 |
113-9800 Lines Gp-Filter -Transmission
| 11***95 | Hose As | 1 |
| 11***97 | Hose As | 1 |
| 11***00 | Lines Group-Filter; -Transmission | 1 |
136-4898 Lines Gp-Power Train Oil
| 13***98 | Lines Group-Power Train Oil | 1 |
| 13***22 | Hose As | 1 |
| 14***90 | Hose As | 1 |
6i-9139 Planetary Gp-Transmission
| 00***41 | Ring | 1 |
| 0L***58 | Bolt 8.26cm (3.25 In.) Long | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
136-4363 Power Train Ar
| 10***06 | Shaft Group-Input | 1 |
| 10***61 | Shaft Group-Drive | 1 |
| 10***30 | Suspension Group-Bogie | 1 |
103-8861 Shaft Gp-Drive
| 0L***58 | Bolt 8.26cm (3.25 In.) Long | 1 |
| 0S***84 | Cap Screw (2 1/4" Long) | 8 |
| 10***59 | Retainer | 1 |
102-0406 Shaft Gp-Input
| 0S***84 | Cap Screw (2 1/4" Long) | 8 |
| 10***06 | Shaft Group-Input | 1 |
| 10***07 | Universal Joint Group | 1 |
135-0519 Shaft Gp-Input
| 13***57 | Shaft-Input | 1 |
| 13***19 | Shaft Group-Input | 1 |
| 13***26 | Gear; (35 Teeth) | 1 |
136-1051 Transmission Ar -With Power Take-Off
| 13***19 | Shaft Group-Input | 1 |
| 13***42 | Drive Group-Pump; -Steering | 1 |
| 13***48 | Clutch Group | 1 |
136-1050 Transmission Ar -Without Power Take-Off
| 13***19 | Shaft Group-Input | 1 |
| 13***42 | Drive Group-Pump; -Steering | 1 |
| 13***48 | Clutch Group | 1 |
112-4530 Valve Gp-Pressure Control
| 11***30 | Valve Group-Pressure Control | 1 |
| 16***79 | Body-Load Piston | 8 |
| 1S***36 | Retainer | 1 |
139-5834 Valve Gp-Relief
| 13***33 | Body-Valve | 1 |
| 13***34 | Valve Group-Relief | 1 |
| 14***41 | Spool As | 1 |
156-5797 Valve Gp-Relief
| 15***97 | Valve Group-Relief | 1 |
| 15***98 | Valve Group-Relief | 1 |
103-5460 Valve Gp-Relief
| 10***60 | Valve Group-Relief | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 4B***84 | Ball | 1 |
112-4527 Valve Gp-Selector & Press Cont
| 11***25 | Spool As-Rotary | 1 |
| 11***27 | Valve Group-Selector & Press Cont | 1 |
| 1B***75 | Bolt (" " " ); Bolt ( " " " ) | 3 |
136-7628 Wheel Gp-Drive -Rubber
| 13***78 | Guard As | 2 |
| 13***28 | Wheel Group-Drive; -Rubber | 1 |
| 14***35 | Plate-Wear | 2 |
134-0783 Wheel Gp-Drive -Slotted Cast
| 10***67 | Wheel-Slotted Drive | 2 |
| 13***78 | Guard As | 2 |
| 13***83 | Wheel Group-Drive; -Slotted Cast | 1 |
Service Equipment And Supplies
173-8685 Chock Gp-Wheel
| 15***59 | Chock-Wheel | 1 |
| 15***30 | Bracket | 1 |
| 15***77 | Washer | 7 |
191-5989 Chock Gp-Wheel
| 15***59 | Chock-Wheel | 1 |
| 15***30 | Bracket | 1 |
| 15***77 | Washer | 6 |
163-0411 Conversion Gp-Certification -Transmission
| 14***03 | Film | 3 |
| 15***59 | Spool-Selector | 1 |
| 16***11 | Conversion Group-Certification; -Transmission | 1 |
156-8185 Film Gp
| 15***42 | Film; (75e-Lh) | 1 |
| 15***43 | Film; (75e-Rh) | 1 |
| 15***85 | Film Group | 1 |
136-5605 Plate & Film Gp
| 10***40 | Film-Warning; (Elec Shock Hazard, Unit Inj) | 4 |
| 13***05 | Plate & Film Group | 1 |
| 13***12 | Plate-Warning-Rops/Fops | 1 |
190-2955 Plate & Film Gp
| 10***46 | Film-Warning; (Elec Shock Hazard, Unit Inj) | 2 |
| 13***83 | Film-Warning | 2 |
| 13***84 | Film-Notice | 1 |
136-5601 Plate & Film Gp
| 10***97 | Film-Notice | 1 |
| 13***85 | Plate-Warning-Rops/Fops | 1 |
| 13***01 | Plate & Film Group | 1 |
156-8184 Plate & Film Gp
| 10***30 | Film; (Warning) (Accumulator Pressure) (On Bracket Covering Brake Accumulator) | 1 |
| 11***01 | Film-Identification; (Auxiliary, Main Circuit Bkr), . Tube; Cyl. Ass'Y | 1 |
| 11***93 | Plate; (Instruction) (On Right Side Behind Cab Door) | 1 |
Undercarriage
136-4364 Axle Gp-Front
| 10***50 | Spindle | 2 |
| 10***37 | Hub-Idler Wheel | 2 |
| 10***73 | Cap Group-Hub | 2 |
1r-1145 Track Gp-Rubber
| 11***54 | Shim-Tapered; (0.4-Deg)(7.09mm Thk) | 2 |
| 11***56 | Shim-Tapered; (0.6-Deg)(7.39mm Thk) | 2 |
| 1R***01 | Track-Rubber; (Belt) | 1 |
1r-1190 Track Gp-Rubber
| 11***54 | Shim-Tapered; (0.4-Deg)(7.09mm Thk) | 2 |
| 11***56 | Shim-Tapered; (0.6-Deg)(7.39mm Thk) | 2 |
| 1R***87 | Track-Rubber | 2 |
1r-1141 Track Gp-Rubber
| 11***54 | Shim-Tapered; (0.4-Deg)(7.09mm Thk) | 2 |
| 11***56 | Shim-Tapered; (0.6-Deg)(7.39mm Thk) | 2 |
| 1R***98 | Belt 626 mm (25") Wide | 2 |
1r-0902 Track Gp-Rubber
| 11***54 | Shim-Tapered; (0.4-Deg)(7.09mm Thk) | 2 |
| 11***56 | Shim-Tapered; (0.6-Deg)(7.39mm Thk) | 2 |
| 1R***02 | Belt Ar | 1 |
1r-1146 Track Gp-Rubber
| 11***54 | Shim-Tapered; (0.4-Deg)(7.09mm Thk) | 2 |
| 11***56 | Shim-Tapered; (0.6-Deg)(7.39mm Thk) | 2 |
| 1R***03 | Track-Rubber; (Belt) | 1 |
1r-1143 Track Gp-Rubber
| 11***54 | Shim-Tapered; (0.4-Deg)(7.09mm Thk) | 2 |
| 11***56 | Shim-Tapered; (0.6-Deg)(7.39mm Thk) | 2 |
| 1R***76 | Track-Rubber; (Belt) | 2 |
1r-1140 Track Gp-Rubber
| 11***54 | Shim-Tapered; (0.4-Deg)(7.09mm Thk) | 2 |
| 11***56 | Shim-Tapered; (0.6-Deg)(7.39mm Thk) | 2 |
| 1R***97 | Track-Rubber | 2 |
1r-1142 Track Gp-Rubber
| 11***54 | Shim-Tapered; (0.4-Deg)(7.09mm Thk) | 2 |
| 11***56 | Shim-Tapered; (0.6-Deg)(7.39mm Thk) | 2 |
| 1R***75 | Track-Rubber; (Belt) | 2 |
145-9567 Belt Tensioner Gp
| 13***81 | Pin As | 4 |
| 14***67 | Belt Tensioner Group | 1 |
| 14***31 | Cylinder Group-Belt Tensioner | 2 |
120-9131 Control Gp-3 Point Hitch
| 12***31 | Control Group-3 Point Hitch | 1 |
| 13***48 | Lever | 1 |
| 16***06 | Sensor Group-Position; -Accelerator Control | 1 |
148-3031 Cylinder Gp-Belt Tensioner
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 10 |
| 10***45 | Plate | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
1r-1139 Idler Gp
| 1R***39 | Idler Group | 1 |
| 1R***46 | Wheel As-Idler | 4 |
198-6816 Scraper Gp-Drum
| 14***81 | Spacer; (13.5x25x12-mm Thk) | 8 |
| 15***53 | Plate | 2 |
| 15***54 | Plate-Wear | 4 |
105-8661 Support Gp-Suspension
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 6 |
| 0S***25 | Bolt, Hex. Hd., 5/8"-11 N.C. X 2 1/2" | 24 |
| 10***19 | Retainer-Inner | 1 |
104-8030 Suspension Gp-Bogie
| 05***03 | Washer; (40.46x69.85x7.37-mm Thk) | 16 |
| 09***11 | Plate | 2 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 96 |
178-7421 Track Gp-Rubber
| 11***52 | Shim-Tapered; (0.2-Deg) | 2 |
| 11***58 | Shim-Tapered; (0.8-Deg) | 2 |
| 17***21 | Track Group-Rubber | 1 |
152-0815 Track Gp-Rubber
| 11***52 | Shim-Tapered; (0.2-Deg) | 2 |
| 11***58 | Shim-Tapered; (0.8-Deg) | 2 |
| 15***15 | Track Group-Rubber | 1 |
183-8411 Track Gp-Rubber
| 18***11 | Track Group-Rubber | 1 |
| 1R***35 | Track-Rubber | 2 |
202-1014 Track Gp-Rubber
| 11***52 | Shim-Tapered; (0.2-Deg) | 2 |
| 11***58 | Shim-Tapered; (0.8-Deg) | 2 |
| 1R***55 | Track-Rubber | 2 |
173-7261 Track Gp-Rubber
| 11***52 | Shim-Tapered; (0.2-Deg) | 2 |
| 11***58 | Shim-Tapered; (0.8-Deg) | 2 |
| 17***61 | Track Group-Rubber | 1 |
75E serial number reference
The PIN plate on a Challenger 75E is a riveted metal tag on the main frame, commonly near the cab entry or engine compartment; the operator's manual diagrams the exact spot for this model. Read the first 3 characters as the prefix (identifies model/build break) and the digits after as the sequential unit number within that break, e.g. 1HM00234 or 6HS00512.
| Prefix | Identifies | Notes |
|---|---|---|
| 1HM | 75E, early build | Challenger 75E agricultural tractor, powered by the 3176 engine (10.3L/629 cu in, 254 kW/340 hp diesel). Earlier serial break within the 1998-2001 production run. |
| 6HS | 75E, later build | Challenger 75E agricultural tractor, powered by the 3176C engine, an updated variant of the 3176 used in the same 1998-2001 production run. Later serial break than 1HM. |
Frequently asked questions
What engine powers the Caterpillar 75E Challenger?
The 75E runs Caterpillar's own 3176/3176C, a turbocharged 10.3 L inline-six diesel rated at 340 gross hp (253.5 kW), the same base engine family used across the late-1990s Challenger 75-series.
What is the operating weight of the Caterpillar 75E?
Operating weight is about 15,785 kg (34,800 lb), carried on Caterpillar's rubber-belted Mobil-Trac undercarriage rather than wheels.
What replaced the Caterpillar 75E?
Caterpillar sold the Challenger brand to AGCO in 2002, after which the line continued as the AGCO-built MT700-series, including the MT765 and MT775, the direct successor to the Cat-era 75E.
What 75E owners discuss
Why does the low track-pressure warning light come on, and does it always mean a bad track?
No. The E-series Mobil-Trac tensioning circuit holds each track around a spring-loaded cylinder that hydraulic pressure works against, and C/D/E-series machines add a nitrogen charge behind that cylinder for extra tension. The warning trips for one of three reasons: bad wiring, nitrogen loss, or a broken drive belt, not necessarily a torn track or bent frame. If one side sits visibly slacker than the other, check the nitrogen charge and wiring before condemning the cylinder. A leaking cylinder seal only gets fixed by a cylinder rebuild, and charging the nitrogen side needs the correct regulator and adapter for this circuit. Have your dealer verify the nitrogen charge and cylinder condition before running the machine hard.
What engine quirks come up on the 3176/3176C in these tractors?
Copper injector sleeve seals in the cylinder head are a known weak point. When they let go, fuel gets into the coolant and coolant can work into the fuel system, so milky coolant or a fuel smell at the header tank point there first. On earlier PEEC-control engines the boost sensor sits low on the block, and its hose can trap water that freezes in cold weather, forcing the engine into a reduced-power or low-boost mode until it thaws or the hose is cleared. Intermittent stalling and erratic shutdowns are traced more often to a faulty speed/RPM sensor or chafed wiring than to the fuel system itself. Air compressor drive spline wear shows up as a new noise and is a cheap fix if caught early. The one to watch closely is cam follower bushing wear: left unchecked it can take the camshaft with it and turn into a major overhaul. Longtime operators still rate the 3176 as good for a 15,000-20,000 hour design life when serviced on schedule, with the transmission and final drives generally outlasting the engine.
What's a normal undercarriage wear pattern on a Mobil-Trac 75E versus something to worry about?
Track guides are the best visual read on alignment history; uneven guide wear side-to-side means the belt has been running out of true. Look closely at the lugs and belt carcass for exposed steel cable. Once cable shows, budget for belt replacement rather than more patching. Debris packed between the rollers and the belt's internal drive lugs holds moisture against the steel and speeds up wear, so wash it out at the end of the day in wet or heavy ground conditions instead of letting it cake on. Tension matters more than it looks: dropping belt sag from around 25 mm (1 in) to 13 mm (0.5 in) roughly doubles working tension, so retension to the book spec rather than by eye. Over-tight is just as damaging as loose.
What electrical or sensor gremlins show up most often?
Field lighting is the recurring electrical complaint on this series. The ballast units for the road and work lights fail over time, and factory ballast stock through the dealer network is thin at this point, which has pushed a lot of owners toward LED retrofits instead of chasing original parts. A low track-pressure warning is more often a wiring or connector fault than a real hydraulic problem, so check the harness and connectors at the tension cylinder before assuming the cylinder itself is bad. The 3176's low-boost fault is really a moisture-in-the-sensor-hose issue presenting as a sensor code rather than a true sensor failure, so trace the hose routing before swapping parts.
What fails in the steering and hydraulic system as these tractors rack up hours?
Steering box wear shows up in the 5,000-6,000 hour range on this platform, and a box rebuild is not cheap, so check steering effort and play on any used machine in or past that hour bracket. The hydraulic reservoir level doubles as a diagnostic: if it reads unusually high, suspect the shared seal between the transmission and hydraulic pump has failed and is passing transmission fluid into the hydraulic side. That's an inexpensive fix if caught early, expensive if it's left to wash out the pump. Have your dealer verify steering box condition and confirm which fluid is actually in the hydraulic circuit before putting the machine back to work.
Is it normal for some transmission shifts to feel harder than others?
Yes. The powershift changes range through a shifting shaft, and owners consistently note the 2-3, 5-6, and 8-9 shifts feel firmer or sharper than the rest. That's the range shaft doing its job, not a fault. What is a fault is a shift that slips or hunts instead of engaging cleanly; that points to worn clutch packs or range shaft wear, and a machine doing that is one to walk away from or price in a transmission rebuild.
What should I check before buying a used 75E?
Walk the tracks first. Guide wear tells you the alignment history, and exposed cable in the belt or torn-back lugs mean near-term replacement cost. Check the hydraulic oil level; unusually high level suggests the transmission-to-hydraulic pump seal has failed. Ask the hour range: past 5,000-6,000 hours, check steering box effort and play, since a rebuild is a major cost. Pull up the onboard computer's logged hours and compare against the hour meter reading; a mismatch flags a swapped meter. Work the brake pedal through full travel and test the park/emergency brake. Brake work on this platform can run close to the value of the machine itself if it's been neglected, so don't skip it. Finally, run the tractor wide open with the rear window open and listen for injector knock, compressor noise, or valvetrain rattle. Have your dealer verify brakes, steering box, and track tension system before you sign off on a used machine.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 75E part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.