Caterpillararticulated dump truckarticulated truck
Caterpillar 730
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 730 is a three-axle, six-wheel-drive articulated dump truck built for off-road hauling in quarries, mines, and heavy civil earthmoving, sized in Cat's medium articulated-truck class with a rated payload of 28 tonnes (31 tons) and a heaped body capacity of about 17.5 m3 (23 yd3). Engine output has climbed across the model's history. The original 730 (introduced around 2001, produced into the mid-2000s) ran a Cat 3176C or 3196 diesel rated near 228 kW (305 hp). The C-Series 730C2 (roughly 2006-2016) moved to a Cat C13 ACERT, with some builds using a Cat C11 ACERT, rated roughly 239-245 kW (320-329 hp). The redesigned 730 (2017 onward) carries a Cat C13 ACERT rated 280 kW gross/274 kW net (375 hp gross/367 hp net). A next-generation 730, entering production from January 2026, uses an updated Cat C13 platform shared across the 725-735 lineup, rated in a 257-316 kW (345-424 hp) band depending on model and market — confirm the exact rating against the serial number prefix. Operating (empty) weight runs roughly 22.5-23.9 tonnes (49,600-52,700 lb) depending on series, tires, and body spec, with loaded gross weight around 51-52 tonnes (113,000-115,000 lb). Cat sells the 730 as a standard rear-dump truck, as the 730 EJ with a horizontal ejector body for confined-clearance or tunnel work, and as a bare chassis in standard or long wheelbase for custom body fitment.
Each generation carried real mechanical change, not just a badge update. The 2017 redesign added all-axle enclosed, oil-immersed wet brakes, Advanced Automatic Traction Control that engages the differential locks automatically instead of by operator switch, Automatic Retarder Control, Assisted Hoisting Control, and stability-assist monitoring, all layered onto the CX31 six-speed transmission carried over from the 730C2. Emissions compliance moved from Tier 2/Stage II and Tier 3/Stage IIIA equivalent ratings on the 2006-2019-era trucks toward Tier 4 Final/Stage V compliance with diesel exhaust fluid dosing on later and next-generation trucks, which adds DEF filters and aftertreatment checks to the maintenance schedule for those serial ranges. The 730 remains one of the most heavily represented articulated trucks in the used-equipment and parts market because Cat has kept the nameplate in continuous production for two-plus decades across quarry, aggregate, and civil construction fleets. Buyers and parts searchers get more useful results from the serial number prefix and build year than from the model name alone, since fluid specifications, filter part families, and brake and differential hardware differ meaningfully between the 3176C/3196, C11/C13 ACERT Tier 2-3, and Tier 4 Final generations.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 730 specifications
Engine
| Original 730 series (circa 2001–2005) | Engine model is not clearly documented in available literature for this earliest series. General references cite roughly 239 kW (320 hp) gross and 228 kW (305 hp) net. Treat as unverified — confirm engine family and rating by serial number with a dealer. |
| 730 Tier 3/Stage IIIA series — Cat C11 ACERT | 6-cylinder diesel. Gross power 242 kW (325 hp) at 1800 rpm (SAE J1995); net power 237 kW (317 hp, SAE J1349) or 239 kW (321 hp, ISO 9249/EEC 80/1269). Bore 130 mm (5.1 in), stroke 140 mm (5.5 in), displacement 11.15 L (680 in³). Meets EPA Tier 3/EU Stage IIIA through 2010. |
| 730C / 730C2 / current 730 series — Cat C13 ACERT (later editions badged simply "Cat C13") | 6-cylinder diesel. Gross power 280 kW (375 hp, SAE J1995); net power 274 kW (367 hp, SAE J1349) or 276 kW (370 hp, ISO 14396). Bore 130 mm (5.1 in), stroke 157 mm (6.2 in), displacement 12.5 L (762.8 in³). Peak gross torque 2141 N·m (1579 lbf-ft) at 1200 rpm; peak net torque about 2107–2120 N·m (1554–1564 lbf-ft), figure varies slightly by build edition. |
| Emissions certification | Varies by series and sales region. C11 ACERT series: EPA Tier 3/EU Stage IIIA. C13 ACERT series covers a range of certifications depending on market build: some regional builds meet Tier 2/Stage II or Tier 3/Stage IIIA equivalent, others meet Tier 4 Final/Stage IV (730C, 730C2), and the newest 730 build meets Tier 4 Final, EU Stage V, Korea Stage V, and Japan 2014. Confirm the exact certification against the machine's build plate. |
| No-derate altitude | No engine derating below 3810 m (12,500 ft) on the C13-engined series. |
Weights
| Operating weight, empty — C11 ACERT series | 22 850 kg (50,376 lb). |
| Operating weight, loaded — C11 ACERT series | 50 970 kg (112,370 lb). |
| Operating weight, empty — C13 ACERT/C13 series (730C, 730C2, current 730) | Approximately 23 500–23 900 kg (51,800–52,700 lb) depending on build edition; performance-chart reference weight in the same literature is 23 725 kg (52,305 lb). |
| Operating weight, loaded — C13 ACERT/C13 series | Approximately 51 500–51 900 kg (113,500–114,400 lb) depending on build edition; performance-chart reference weight is 51 725 kg (114,034 lb). |
| Rated payload | 28 tonnes (31 tons) — consistent across the C11 and C13 series body/chassis combinations. |
| Ejector (EJ) body configurations | EJ (ejector-body) variants run heavier than the equivalent rear-dump truck due to the ejector mechanism; published loaded weights for EJ-bodied 730/730C trucks fall in roughly the 118,000–121,000 lb range. Confirm the exact figure for a given EJ configuration against that model's own spec sheet. |
| Ground pressure | Not published in available factory literature for this machine class. |
Dimensions
| Overall length — C11 ACERT series | 9920 mm (32 ft 6 in). |
| Overall width — C11 ACERT series | Body width 2902 mm (9 ft 6 in); width over tire 2877 mm (9 ft 5 in). |
| Transport height — C11 ACERT series | 3544 mm (11 ft 7 in) standard; 3268 mm (10 ft 9 in) with scissor tailgate fitted. |
| Ground clearance — C11 ACERT series | 495 mm (1 ft 8 in). |
| Axle spacing — C11 ACERT series | Mid-to-front axle centers 3819 mm (12 ft 6 in); rear-to-mid axle centers 1700 mm (5 ft 7 in). |
| Overall length — C13 ACERT/C13 series | 10 445 mm (34 ft 3 in); 10 555–10 593 mm (34 ft 8 in) with tailgate fitted. |
| Overall width — C13 ACERT/C13 series | 3676–3773 mm (12 ft 1 in–12 ft 5 in) depending on build edition and tire/mirror configuration. |
| Transport height — C13 ACERT/C13 series | Approximately 3487–3508 mm (11 ft 5 in–11 ft 6 in). |
| Ground clearance — C13 ACERT/C13 series | 543–545 mm (1 ft 9 in). |
| Axle spacing — C13 ACERT/C13 series | Mid-to-front axle centers 3979 mm (13 ft 1 in); rear-to-mid axle centers 1700 mm (5 ft 7 in). |
| Track width | 2275 mm (7 ft 6 in) — consistent across both series (23.5R25 tires). |
| SAE turning radius — C11 ACERT series | 7254 mm (286 in); clearance radius 7605 mm (300 in); inside radius 3710 mm (146 in); aisle width 4980 mm (196 in). |
| SAE turning radius — C13 ACERT/C13 series | 7470 mm (294 in); clearance radius 8075 mm (318 in); inside radius 3879 mm (153 in); aisle width 5332 mm (210 in). |
| Body (dump) capacity, heaped SAE 2:1 | 16.9 m³ (22.1 yd³) on the C11 series; 17.5 m³ (23 yd³) on the C13 series. Struck capacity 13.1–13.3 m³ (17.1–17.4 yd³); tailgate-fitted heaped capacity 18.5–18.8 m³ (24–24.6 yd³). |
Performance
| Travel speed, forward gears (6-speed, both engine series) | 1st 8 km/h (5 mph); 2nd 15 km/h (9 mph); 3rd 22 km/h (14 mph); 4th 34 km/h (21 mph); 5th 47 km/h (29 mph); 6th (top) 55 km/h (34 mph). |
| Travel speed, reverse | 9 km/h (5–6 mph), single reverse gear. |
| Steering cycle time | Lock-to-lock 4.75 seconds at 60 rpm pump speed; steer angle 45° left/right from center. |
| Gradeability / rimpull | Published as full gradeability-speed-rimpull and retarding-performance charts (percent total resistance plotted against speed, by gear), not as a single gradeability percentage. Read the chart for the specific series/build to get an operating point. |
| Body hoist cycle | Raise approximately 12 seconds; lower approximately 8 seconds — consistent across series. |
| Interior cab sound level | 72–76 dB(A), varies by build edition and test standard used. |
Service capacities (summary)
| Fuel tank — C11 ACERT series | 355 L (94 gal). |
| Fuel tank — C13 ACERT/C13 series | 412 L (108.8 gal). |
| Cooling system — C11 ACERT series | 67 L (18 gal). |
| Cooling system — C13 ACERT/C13 series | 83 L (21.9 gal). |
| Hydraulic system — C11 ACERT series | 151 L (49 gal). |
| Hydraulic system — C13 ACERT/C13 series | 110 L (29.1 gal). |
| Engine oil (crankcase) — C11 ACERT series | 41 L (11 gal). |
| Engine oil (crankcase) — C13 ACERT/C13 series | 38 L (10 gal). |
| DEF tank — Tier 4 Final/Stage IV-V builds only | 20 L (5.2–5.3 gal). Not applicable to Tier 2/Stage II- or Tier 3/Stage IIIA-equivalent builds, which carry no SCR aftertreatment. |
| Transmission | 36 L (9.5 gal) on the C11 series; 47 L (12.4 gal) on the C13 series. |
| Final drives/differential | 164 L (43.3 gal) on the C11 series; 125 L (33 gal) on the C13 series. |
| Output transfer gearbox | 18 L (4.8 gal) on the C11 series; 24 L (6.3 gal) on the C13 series. |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
730 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 38 L (10.0 US gal) | Cat DEO-ULS or Cat DEO diesel engine oil. SAE 15W-40 for roughly -10°C to 50°C ambient; SAE 10W-30 for roughly -18°C to 40°C. Cat DEO-ULS SYN, Cat DEO SYN, or Cat DEO Cold Weather for extreme cold climates. ULSD fuel (15 ppm sulfur or less) required; compatible with up to 20% biodiesel FAME blend, or up to 100% renewable diesel (HVO)/GTL on aftertreatment-equipped engines per dealer guidance. |
| Cooling system | 83 L (21.9 US gal) | Factory fill is ethylene glycol coolant: Cat Extended Life Coolant (ELC) or Cat Diesel Engine Antifreeze/Coolant (DEAC). Cold-climate coolant rated to -51°C (-60°F) available as a factory option. |
| Fuel tank | 412 L (108.8 US gal) | Ultra-low sulfur diesel (ULSD, 15 ppm sulfur max). Compatible with ULSD blended up to 20% biodiesel (FAME), or up to 100% renewable diesel/HVO and GTL fuels; engines without aftertreatment can run higher biodiesel blends. Anti-waxing fuel additive offered for cold climates. |
| DEF tank (Tier 4 Final / Stage V engines) | 20 L (5.3 US gal) | Diesel Exhaust Fluid meeting ISO 22241-1, including AdBlue-certified brands. Not fitted on earlier Tier 2/Tier 3 (non-SCR) versions of this machine. |
| Transmission (CX31 powershift) | 47 L (12.4 US gal) | Cat TDTO (Transmission/Drive Train Oil). SAE 10W, 30, or 50 selected by ambient temperature; Cat TDTO-TMS multigrade or Cat TDTO Cold Weather (SAE 0W-20) for cold-climate operation. |
| Final drives/differentials (front, center and rear axle housings, combined) | 125 L (33.0 US gal) | Cat TDTO, same climate-based viscosity selection as the transmission (SAE 10W/30/50, or TDTO-TMS/TDTO Cold Weather in cold climates). |
| Output transfer gear box | 24 L (6.3 US gal) | Cat TDTO, viscosity selected by ambient temperature as for the transmission and final drives. |
| Hydraulic system (steering, brakes, hoist) and tank | 110 L (29.1 US gal) | Cat HYDO Advanced hydraulic oil (10/20/30 grades chosen by ambient temperature) or Cat Bio HYDO Advanced, an EU Ecolabel-approved biodegradable hydraulic oil offered as an alternative fill. |
| Grease (chassis, pin and articulation points) | Spec only - no reservoir capacity published | Cat multipurpose extreme-pressure grease (NLGI 2), such as Cat Prime Application Grease or Cat Advanced 3Moly Grease, at pin and articulation points. Hitch-area lube points are grouped for service; an automatic (auto-lube) greasing system is available as a factory option. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 730 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
| Every 6,000 h |
|
| Every 12,000 h |
|
Servicing the 730 beyond the schedule
Predictive Maintenance & Fluid Analysis
The 730 ships with S.O.S sampling valves as standard equipment, so pull engine, transmission, and differential oil samples at each scheduled drain instead of skipping analysis. Track wear metals from the Cat C13 ACERT engine and CX31 transmission clutch packs to catch bearing or clutch wear before it reaches the final drives. Test Extended Life Coolant condition ahead of the long 6,000- and 12,000-hour intervals, and monitor DEF quality on Tier 4 Final-equipped trucks to protect the aftertreatment system from crystallization and dosing faults.
Corrective & Common Repairs
Expect wear first at the articulating/oscillating hitch: steering cylinder pins, hitch bushings, and the cast-steel hitch head take the brunt of frame-to-frame movement on rough haul roads. The output transfer gear's wet clutch differential lock wears from constant on-the-go engagement in poor underfoot conditions. All-axle enclosed wet brakes cut contamination failures but still need periodic disc and plate replacement. On C13 ACERT trucks, watch turbocharger and MEUI-C injector performance; on Tier 4 Final units, chase DEF dosing or sensor faults early before they trigger derates.
Overhaul & Rebuild Points
The 730's engine is built for long life to overhaul, so plan a top-end or inframe rebuild around major hour milestones rather than a fixed calendar date. The CX31 transmission's clutch packs and the front, center, and rear differentials and final drives are each serviced independently, so isolate which axle is actually wearing before pulling components. Hoist and steering cylinders generally take reseal kits rather than full replacement. Inspect the high-strength wear-steel dump body liners and swap worn sections before the base plate itself takes abrasion damage.
Seasonal & Environment Servicing
Cold-climate 730s draw on factory options worth knowing: coolant rated to -51°C (-60°F), a block heater, an ether starting aid, and an anti-waxing fuel additive for sub-zero starts. In hot, dusty quarry settings, clean the rear-mounted radiator package more often than the standard interval and watch the A/C receiver-dryer, due at 2,000 hours. The exhaust-heated dump body option cuts material sticking and freeze-on during cold dumping cycles, and wide-tire options help traction in soft or wet underfoot conditions typical of wet-season hauling.
730 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 1R-0762 | Filter As-Fuel | Fuel system service | Check fitment → |
| 129-0375 | Bowl As-Water Collection | Fuel system service | Check fitment → |
| 133-5673 | Element | Fuel system service | Check fitment → |
| 142-1339 | Filter Element As-Air | Air intake service | Check fitment → |
| 142-1404 | Filter Element As-Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
730 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 585-02 | Transmission Output Speed Sensor #1: data erratic, intermittent, or incorrect | Damaged or intermittent output speed sensor, chafed harness, or a loose/corroded connector at the transmission | Inspect the harness and connector for damage first, confirm the sensor signal with the diagnostic tool, then replace the sensor if the wiring checks out good |
| 585-05 | Transmission Output Speed Sensor #1: current below normal (open circuit) | Broken sensor wiring, a disconnected connector, or a failed sensor coil | Check for an open circuit in the sensor wiring and connector, test sensor resistance against spec, and replace the sensor or repair the harness as needed |
| E329 | Transmission oil filter restriction / bypass event | Plugged transmission filter element, a non-OEM filter with different flow resistance, or a transmission oil temperature sensor reading that trips the restriction threshold | Change the transmission filter and bypass switch, confirm the oil temperature sensor reads correctly, and use a factory-spec filter element going forward |
| 6863-09 | Payload Weight Sensor #1: abnormal update rate | Data-link communication fault between the payload/body sensor and the controller, or a failed payload sensor, on trucks with the optional payload system | Check payload system wiring and connectors for damage, verify sensor communication with the diagnostic tool, then replace the sensor if it will not update |
| 172-04 | Engine Air Inlet (Intake Manifold) Temperature Sensor: voltage below normal | Short to ground in the sensor circuit, a corroded connector, or a failed sensor | Inspect the sensor connector and wiring for a short to ground, test sensor resistance against spec, and replace the sensor if out of range |
| 110-03 | Engine Coolant Temperature Sensor: voltage above normal | Open circuit or short to a voltage source in the coolant temperature sensor wiring, less commonly a failed sensor | Check the sensor connector and wiring for damage or corrosion, verify sensor resistance, and replace the sensor if faulty |
| 100-03 | Engine Oil Pressure Sensor: voltage above normal | Open circuit or short to a voltage source in the oil pressure sensor wiring, less commonly a failed sensor | Inspect wiring and connector at the sensor, confirm actual oil pressure with a mechanical gauge, then replace the sensor if wiring tests good |
| 168-04 | Battery / System Voltage: voltage below normal | Weak or failing battery, undercharging alternator, corroded battery cables, or excessive electrical load | Load-test the batteries, check charging system output and belt condition, then inspect ground straps and cable connections |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
730 attachments & work tools
Dump body and tailgate configurations
Standard fabricated dump body carries a factory spill guard as an integral part of the body, sized around 17.5 m3 (23 yd3) heaped with roughly 28-31 tonnes (31 tons) rated payload depending on tailgate and series. An optional scissor tailgate adds heaped capacity (documented up to about 24.6 yd3 SAE 2:1 heaped with tailgate fitted) versus the open struck body; body liners are a separate factory/dealer option for abrasive or sticky material.
Ejector body variant (730 EJ)
The 730 EJ swaps the tipping body for a push-plate ejector body that discharges material without raising the box, keeping the machine low and stable. This suits landfills, soft ground, tunnels/underground work with overhead restrictions, sloped terrain, and on-the-go spreading; rated payload on this variant runs around 28 tonnes (31 tons) with a slightly smaller struck/heaped volume than the standard tipping body.
Bare chassis for OEM specialty bodies
Cat offers the 730 as a bare chassis platform (no dump body) for dealer/OEM-fitted specialty bodies: water tankers for dust suppression and fire protection, fuel-and-lube service trucks, waste/coal haulers, container or hooklift carriers, cable-reel trucks, and log/forestry bodies. No quick-coupler or tool-carrier interface is used; OEM bodies mount to the chassis frame and subframe provisions supplied with the bare chassis.
Wheelbase and hoist-cylinder arrangement
Bare chassis units are ordered in standard wheelbase (SWB) or long wheelbase (LWB), with the LWB accommodating longer specialty bodies while retaining the truck's steering, braking, and ride characteristics. Chassis can also be specified with or without factory hoist cylinders depending on whether the upfitted body will be a tipping or non-tipping design, so the hydraulic hoist circuit is effectively an order-time option rather than a field-fit kit.
Body heat / carryback reduction system
An optional body-heat arrangement reroutes engine exhaust heat under the dump body to reduce material carryback and sticking in cold or wet/sticky-material applications, supporting faster cycle times and cleaner unloading.
Guarding and structural protection options
The cab uses an integral ROPS/FOPS structure as standard. Additional factory/dealer guard packages cover the axle, crankcase, radiator, and rear window for sites with heavy debris or overhead hazard exposure; guarding is selected by application rather than being a single fixed package.
Tire options
Standard fitment is six 23.5R25 radial tires; a 750/65R25 radial flotation tire is offered as an alternative for softer ground or lower ground-pressure needs. Bias-ply options and alternate tread patterns are also referenced for the ejector variant depending on site conditions, so exact tire spec varies by configuration and dealer stock.
Mud flaps and transport guarding
Body-mounted mud flaps with transportation tiebacks are a factory option to control spray/debris on public roads and to secure flaps during transport moves between sites.
Matched loading-tool compatibility
The 730 is factory pass-matched for loading by mid-size Cat hydraulic excavators (349/352 and 336 class) and wheel loaders (950, 962, 966, 972 class); bucket/pass counts are tuned to the truck's body capacity to balance loading cycles against payload target, rather than the truck itself accepting mounted work tools.
All 730 assemblies by section
Every catalogued assembly group for the Caterpillar 730. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
196-3591 Aftercooler Gp-Air
| 16***23 | Spacer; (13.5x57x15-mm Thk) | 4 |
| 16***24 | Plate | 1 |
| 18***84 | Washer; (13.5x50x1.6-mm Thk) | 4 |
141-5717 Air Cleaner Gp
| 14***17 | Air Cleaner Group | 1 |
| 17***85 | Air Cleaner Group | 1 |
| 17***86 | Bracket As | 1 |
171-3885 Air Cleaner Gp
| 13***29 | Valve-Dust; (Air Cleaner) | 1 |
| 14***39 | Filter Element As-Air; (Primary) | 1 |
| 14***04 | Filter Element As-Air; (Secondary) | 1 |
174-0056 Elbow Gp-Air Inlet
| 10***25 | Gasket; (Air Inlet Manifold)(Intake Manifold Inlet) | 1 |
| 10***03 | Elbow; (Air Inlet) | 1 |
| 15***87 | Bolt As | 4 |
185-1347 Elbow Gp-Exhaust
| 10***82 | Bolt-Socket Head; (M10x1.5x100-mm) | 4 |
| 18***06 | Tube As | 1 |
| 18***10 | Plate As | 1 |
225-2615 Lines Gp-Air
| 12***29 | Clamp; (V-Band) | 1 |
| 21***46 | Elbow | 1 |
| 22***15 | Lines Group-Air | 1 |
139-5323 Lines Gp-Air
| 13***23 | Lines Group-Air | 1 |
| 17***90 | Tube As | 1 |
| 17***91 | Elbow | 1 |
158-4913 Lines Gp-Air
| 15***13 | Lines Group-Air | 1 |
| 16***07 | Tube | 1 |
| 16***08 | Tube | 1 |
126-0081 Lines Gp-Air -Turbocharger Outlet
| 12***08 | Elbow | 1 |
| 12***81 | Lines Group-Air; -Turbocharger Outlet | 1 |
| 12***29 | Clamp; (V-Band) | 1 |
117-2688 Manifold Gp-Exhaust
| 10***13 | Gasket | 6 |
| 11***89 | Manifold-Exhaust; (Center) | 1 |
| 11***15 | Stud-Taperlock; (M10x85-mm Oal) | 12 |
116-5405 Manifold Gp-Inlet
| 11***05 | Manifold Group-Inlet | 1 |
| 11***06 | Manifold; (Inlet) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
149-0013 Muffler Gp
| 14***85 | Nut-Weld; (M10 X 1.5 Thd) | 2 |
| 14***13 | Muffler Group | 1 |
| 16***81 | Pipe As | 1 |
190-7353 Pipe Gp-Exhaust
| 14***34 | Shim; (3-mm Thk) | 4 |
| 14***35 | Shim; (8-mm Thk) | 4 |
| 14***55 | Buffer-Rubber | 4 |
149-0048 Pipe Gp-Exhaust -Front
| 14***48 | Pipe Group-Exhaust; -Front | 1 |
| 17***61 | Pipe As | 1 |
| 18***52 | Pipe As | 1 |
149-0148 Pipe Gp-Exhaust -Rear
| 14***48 | Pipe Group-Exhaust; -Rear | 1 |
| 18***47 | Elbow Group-Exhaust | 1 |
| 18***06 | Plate-Clamp | 1 |
149-0014 Shield Gp-Exhaust
| 14***14 | Shield Group-Exhaust | 1 |
| 17***17 | Plate-Bottom | 1 |
| 18***04 | Guard As-Turbocharger | 1 |
135-5394 Turbocharger Gp
| 12***53 | Clamp As; (Turbine) | 1 |
| 13***94 | Turbocharger Group | 1 |
| 13***72 | Cartridge Group-Turbocharger | 1 |
190-6214 Turbocharger Gp
| 12***53 | Clamp As; (Turbine) | 1 |
| 13***73 | Housing-Turbine | 1 |
| 13***74 | Cover-Compressor | 1 |
132-3174 Turbocharger Gp
| 13***74 | Turbocharger Group | 1 |
| 19***14 | Turbocharger Group | 1 |
| 1S***95 | Gasket-Turbocharger To Manifold; Gasket Turbocharger To Manifold | 1 |
Basic Engine
167-0017 Belt Tensioner Gp
| 12***37 | Seal-O-Ring (Id=10.8mm); (Id=10.80mm) | 2 |
| 12***64 | Stud; (M12x1.75x86.3-mm Oal) | 2 |
| 12***90 | Pulley; (8-Groove)(Alternator) | 1 |
196-6920 Belt Tensioner Gp
| 12***64 | Stud; (M12x1.75x86.3-mm Oal) | 2 |
| 12***90 | Pulley; (8-Groove)(Alternator) | 1 |
| 14***11 | Pulley Group-Idler | 1 |
171-3062 Camshaft Gp
| 11***59 | Cover | 1 |
| 12***11 | Journal | 1 |
| 13***68 | Gasket; (Camshaft Cover) | 1 |
115-2985 Cover Gp-Cylinder Block
| 11***85 | Cover Group-Cylinder Block | 1 |
| 4P***87 | Cover | 1 |
| 6V***50 | Seal-O-Ring (Id=39.34mm) | 1 |
209-6669 Cover Gp-Front Housing
| 12***81 | Seal-Integral; (Air Compressor Mounting) | 1 |
| 14***14 | Cover | 1 |
| 20***69 | Cover Group-Front Housing; (Air Compressor) | 1 |
136-4307 Cover Gp-Front Housing
| 13***07 | Cover Group-Front Housing; -Hydraulic Pump Drive | 1 |
| 1H***39 | Packing,Preformed Cover Part Of Kit P/N 4j***80 | 1 |
| 4P***50 | Cover | 1 |
132-3212 Crankshaft Gp
| 12***82 | Bearing-Main; (0.51-mm Us)(.51mm U.S.) | 0 |
| 12***83 | Bearing-Main; (0.76-mm Us)(.76mm U.S.) | 0 |
| 12***84 | Bearing-Main; (0.51-mm Os)(.51mm O.S.) | 0 |
204-3449 Cylinder Block As
| 10***60 | Seal; (Liner) | 6 |
| 16***63 | Shim-Liner; -Cylinder | 0 |
| 16***64 | Shim-Liner; -Cylinder | 0 |
148-2096 Cylinder Block As
| 10***60 | Seal; (Liner) | 6 |
| 14***62 | Cylinder Block As | 1 |
| 14***96 | Cylinder Block As | 1 |
148-2062 Cylinder Block As
| 11***66 | Cap; (Bearing) | 7 |
| 12***16 | Bearing; (Sleeve) | 5 |
| 12***17 | Bearing-Sleeve; (Narrow) | 1 |
200-2054 Cylinder Block As
| 11***66 | Cap; (Bearing) | 7 |
| 17***54 | Bolt-Hex Head; (M16x160mm) | 14 |
| 20***54 | Cylinder Block As | 1 |
115-2983 Cylinder Block Gp
| 11***83 | Cylinder Block Group | 1 |
| 14***96 | Cylinder Block As | 1 |
| 1N***99 | Plug-O-Ring; (Straight Thread) | 2 |
179-9459 Cylinder Head As
| 11***02 | Sleeve; (Injector) | 6 |
| 13***06 | Insert-Valve Seat; (Inlet)(Standard) | 12 |
| 14***52 | Insert-Valve Seat; (0.508-mm Os Od)(0.508-mm Os Od) | 12 |
179-9462 Cylinder Head As
| 10***50 | Guide-Valve; (Standard) | 24 |
| 10***34 | Guide-Valve; (0.127-mm Os Od) | 0 |
| 10***35 | Guide-Valve; (0.508-mm Os Od) | 0 |
148-2150 Cylinder Head As
| 11***02 | Sleeve; (Injector) | 6 |
| 13***97 | Insert-Valve Seat; (Exhaust) | 12 |
| 13***06 | Insert-Valve Seat; (Inlet)(Standard) | 12 |
148-2148 Cylinder Head As
| 10***50 | Guide-Valve; (Standard) | 24 |
| 14***48 | Cylinder Head As | 1 |
| 14***50 | Cylinder Head As | 1 |
148-2149 Cylinder Head Gp
| 10***50 | Guide-Valve; (Standard) | 24 |
| 10***34 | Guide-Valve; (0.127-mm Os Od) | 0 |
| 10***35 | Guide-Valve; (0.508-mm Os Od) | 0 |
116-1085 Cylinder Head Gp
| 11***85 | Cylinder Head Group | 1 |
| 14***49 | Cylinder Head Group | 1 |
| 18***07 | Gasket As-Cylinder Head | 1 |
117-2766 Damper Gp
| 11***66 | Damper Group | 1 |
| 13***83 | Bolt-12 Point Head; (M10x1.5x30-mm) | 8 |
| 16***25 | Damper Assem. | 1 |
180-3707 Drive Gp-Accessory
| 03***46 | Elbow, 90 Deg Adj., 1/4in. J.I.C. X 7/16in.-14 Str. Thd. | 1 |
| 12***49 | Hose As-End | 1 |
| 12***46 | Hose-Fumes Disposal | 1 |
116-1083 Fastener Gp-Cylinder Head
| 11***83 | Fastener Group-Cylinder Head; (Cylinder Head) | 1 |
| 12***84 | Bolt; (Hex Head) (M16x2x160mm) | 26 |
| 2S***58 | Washer-Hard; (17x29x3-mm Thk)(Engine Brake) | 26 |
117-2771 Fastener Gp-Damper & Pulley
| 11***71 | Fastener Group-Damper & Pulley | 1 |
| 5P***47 | Washer (Bracket To Valve Support) | 6 |
| 8T***81 | Bolt; (M16x2.0x80mm) | 6 |
117-2750 Gear Gp-Front
| 11***50 | Gear Group-Front | 1 |
| 13***83 | Shaft | 1 |
| 13***86 | Gear As; (Idler) (71 Teeth) | 1 |
190-6255 Guard Gp-Belt
| 10***84 | Bolt-Socket Head; (M10x1.5x25-mm) | 2 |
| 10***82 | Bolt-Socket Head; (M10x1.5x100-mm) | 2 |
| 19***55 | Guard Group-Belt | 1 |
179-6417 Housing Gp-Flywheel
| 06***55 | Seal-O-Ring (Id=47.22mm) | 1 |
| 17***76 | Housing-Flywheel | 1 |
| 17***17 | Housing Group-Flywheel | 1 |
133-7075 Housing Gp-Front
| 11***24 | Gear; (Pump Drive) (34 Teeth) | 1 |
| 13***75 | Housing Group-Front | 1 |
| 16***66 | Seal Group-Crankshaft; (Front) | 1 |
148-2063 Lifter Gp-Valve -Mechanism
| 0L***26 | Plug -13mm(.512 In.) Outside Dia. | 2 |
| 12***93 | Dowel | 1 |
| 14***63 | Lifter Group-Valve; -Mechanism | 1 |
117-2748 Lifting Gp-Engine
| 11***05 | Plate; (Lifting Eye) | 2 |
| 11***48 | Lifting Group-Engine | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 6 |
148-9991 Mounting Gp-Engine & Xmsn
| 14***91 | Mounting Group-Engine & Xmsn | 1 |
| 17***87 | Bracket; (Lh) | 1 |
| 17***88 | Bracket; (Rh) | 1 |
116-5408 Mounting Gp-Valve Mechanism
| 11***83 | Fastener Group-Cylinder Head; (Cylinder Head) | 1 |
| 11***08 | Mounting Group-Valve Mechanism | 1 |
| 17***68 | Bridge As-Valve; (Intake) | 12 |
123-0772 Pan Gp-Oil -Engine
| 06***58 | Seal-O-Ring; (Oil Pan Drain Plug) | 2 |
| 10***08 | Gasket; (Oil Pan) | 1 |
| 12***72 | Pan Group-Oil; -Engine | 1 |
130-0863 Piston & Rod Gp
| 11***99 | Plug-Pin | 2 |
| 11***16 | Rod Assem. | 1 |
| 11***72 | Bearing-Connecting Rod | 1 |
170-6488 Plug Gp-Engine
| 17***88 | Plug Group-Engine | 1 |
| 3B***23 | Core Plug--Flywheel Housing Pinion Shaft Hole | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
117-2795 Pulley Gp-Crankshaft
| 11***95 | Pulley Group-Crankshaft; (Crankshaft) | 1 |
| 13***56 | Pulley; (8-Groove) | 1 |
142-2011 Pulley Gp-Idler
| 12***37 | Seal-O-Ring (Id=10.8mm); (Id=10.80mm) | 1 |
| 14***11 | Pulley Group-Idler | 1 |
| 14***11 | Pulley As-Idler | 1 |
115-9397 Rocker Arm Gp
| 09***14 | Pin; (Spring) | 1 |
| 11***97 | Rocker Arm Group | 1 |
| 11***98 | Arm; (Valve Rocker) (Exhaust) | 2 |
116-1091 Seal Gp-Crankshaft
| 10***80 | Seal-O-Ring (Id=177.17mm) | 1 |
| 11***91 | Seal Group-Crankshaft; -Single Lip | 1 |
| 16***23 | Cover | 1 |
115-3004 Support Gp-Engine
| 11***04 | Support Group-Engine | 1 |
| 17***21 | Support-Front | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 8 |
117-2749 Valve Mechanism Gp -Engine
| 10***42 | Base-Valve Mechanism Cover | 1 |
| 10***67 | Pushrod; (Valve) | 12 |
| 10***68 | Pushrod-Injector | 6 |
Braking System
245-1029 Accumulator & Mtg Gp-Brake -Service
| 11***87 | Screw | 1 |
| 11***88 | Seal; (O-Ring) | 1 |
| 11***89 | Cap | 1 |
163-9413 Accumulator & Mtg Gp-Brake
| 16***13 | Accumulator & Mtg Group-Brake; -Service | 1 |
| 16***17 | Clamp As | 2 |
| 16***23 | Plate As | 1 |
174-3183 Accumulator Gp-Brake -Charged
| 11***87 | Screw | 1 |
| 11***88 | Seal; (O-Ring) | 1 |
| 11***89 | Cap | 1 |
236-7796 Accumulator Gp-Brake -Uncharged
| 23***96 | Accumulator Group-Brake; -Uncharged | 1 |
| 34***88 | Kit-Seal | 1 |
| 3V***97 | Bolt; (3/8-16x1-In) | 4 |
236-7794 Accumulator Gp-Brake -Charged
| 11***87 | Screw | 1 |
| 11***88 | Seal; (O-Ring) | 1 |
| 11***89 | Cap | 1 |
174-3199 Accumulator Gp-Brake -Uncharged
| 11***87 | Screw | 1 |
| 11***88 | Seal; (O-Ring) | 1 |
| 11***89 | Cap | 1 |
172-2412 Accumulator Gp-Brake -Uncharged
| 11***87 | Screw | 1 |
| 11***88 | Seal; (O-Ring) | 1 |
| 11***89 | Cap | 1 |
163-5632 Accumulator Gp-Brake -Charged
| 11***87 | Screw | 1 |
| 11***88 | Seal; (O-Ring) | 1 |
| 11***89 | Cap | 1 |
347-9761 Brake Gp-Hyd Caliper Service
| 16***09 | Brake Group-Parking | 1 |
| 19***69 | Washer; (22x40x10-mm Thk) | 4 |
| 29***64 | Bolt; (M20x1.5x80-mm) | 4 |
160-8009 Brake Gp-Parking
| 15***42 | Actuator As-Parking Brake | 1 |
| 16***09 | Brake Group-Parking | 1 |
| 17***31 | Pin | 1 |
160-7200 Brake Gp-Parking
| 15***42 | Actuator As-Parking Brake | 1 |
| 16***00 | Brake Group-Parking | 1 |
| 17***31 | Pin | 1 |
159-7596 Brake Gp-Service
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
| 14***61 | Elbow Group | 1 |
149-0111 Control Gp-Parking Brake
| 10***93 | Cap; (Nipple) | 2 |
| 14***14 | Kit-Seal | 1 |
| 14***65 | Elbow | 2 |
230-3006 Control Gp-Service Brake
| 10***93 | Cap; (Nipple) | 2 |
| 14***65 | Elbow | 2 |
| 14***75 | Elbow Group | 1 |
149-0061 Control Gp-Service Brake
| 14***75 | Elbow Group | 2 |
| 14***27 | Tee As; (Orfs) | 1 |
| 14***61 | Control Group-Service Brake | 1 |
245-0982 Control Gp-Service Brake
| 24***82 | Control Group-Service Brake | 1 |
| 25***22 | Guard As-Brake | 6 |
| 26***48 | Boss; (7/16-14-Thd) | 6 |
207-0480 Control Gp-Service Brake -Rear
| 10***93 | Cap; (Nipple) | 2 |
| 14***65 | Elbow | 2 |
| 14***75 | Elbow Group | 1 |
262-5738 Guard Gp-Brake
| 14***57 | Union Bulkhead; (Orfs) | 2 |
| 17***07 | Hose As | 2 |
| 17***19 | Tube As | 1 |
234-5592 Lines Gp-Parking Brake -Rear
| 14***51 | Tube As | 1 |
| 14***52 | Tube As | 1 |
| 14***70 | Bracket | 1 |
148-9982 Lines Gp-Parking Brake
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
| 14***61 | Elbow Group | 1 |
234-5593 Lines Gp-Service Brake -Front
| 14***64 | Hose As | 1 |
| 14***30 | Hose As | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
148-9972 Lines Gp-Service Brake -Front
| 11***73 | Bolt-12 Point Head; (M10x1.5x35-mm) | 4 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 3 |
148-2759 Lines Gp-Service Brake -Rear
| 14***59 | Lines Group-Service Brake; -Rear | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 2 |
| 14***54 | Tee Group | 1 |
148-2758 Lines Gp-Service Brake -Center
| 14***51 | Tube As | 1 |
| 14***52 | Tube As | 1 |
| 14***58 | Lines Group-Service Brake; -Center | 1 |
245-5792 Lines Gp-Service Brake
| 17***22 | Pump Group-Piston; -Brake | 1 |
| 24***92 | Lines Group-Service Brake | 1 |
| 7X***89 | Bolt-12 Point Head; (1/2-13x1.75-In) | 2 |
148-9983 Lines Gp-Service Brake -Front
| 11***73 | Bolt-12 Point Head; (M10x1.5x35-mm) | 4 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 3 |
149-0129 Lines Gp-Service Brake -Rear
| 14***64 | Hose As | 1 |
| 14***30 | Hose As | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
148-9994 Pump & Mtg Gp-Brake
| 10***26 | Ring | 2 |
| 13***11 | Valve-Check | 2 |
| 14***73 | Valve Group-Pressure Reducing; -Service Brake | 1 |
224-1209 Valve Gp-Chk & Press Reducing -Service Brake
| 15***40 | Valve Group-Solenoid; -Reversing Fan, Ride Control | 1 |
| 15***56 | Valve Group-Check; -Pilot, Differential Lock Oil | 1 |
| 22***09 | Valve Group-Chk & Press Reducing; -Service Brake | 1 |
173-6219 Valve Gp-Chk & Press Reducing -Service Brake
| 10***26 | Ring | 2 |
| 13***11 | Valve-Check | 2 |
| 14***73 | Valve Group-Pressure Reducing; -Service Brake | 1 |
174-0020 Valve Gp-Parking Brake
| 14***89 | Kit-Seal | 0 |
| 17***20 | Valve Group-Parking Brake | 1 |
140-0973 Valve Gp-Pressure Reducing -Service Brake
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 14***73 | Valve Group-Pressure Reducing; -Service Brake | 1 |
| 16***49 | Seal-O-Ring; (12.42mm Id) | 1 |
257-8414 Valve Gp-Shuttle -Brake Oil Flow
| 11***43 | Locknut; (5/16-18-Thd) | 2 |
| 15***38 | Cartridge Assem. | 1 |
| 19***01 | Kit-Seal; (Solenoid Valve) | 1 |
213-4555 Valve Gp-Shuttle
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 16***49 | Seal-O-Ring; (12.42mm Id) | 1 |
| 16***61 | Ring-Backup | 1 |
152-8340 Valve Gp-Solenoid
| 15***40 | Valve Group-Solenoid; -Reversing Fan, Ride Control | 1 |
| 17***92 | Pump Group-Metering | 1 |
| 18***67 | Steering Column Group-Adjustable | 1 |
Cooling System
139-5324 Fan Gp-Suction
| 13***24 | Fan Group-Suction | 1 |
| 16***97 | Boss | 1 |
| 19***95 | Guard As-Fan | 1 |
214-0693 Housing & Regulator Gp
| 12***11 | Stud; (M8x1.25-Thd)(M8x1.25 Thd Both Ends) | 1 |
| 13***63 | Manifold | 1 |
| 13***64 | Gasket; (Temperature Regulator Housing) | 1 |
170-3764 Housing & Regulator Gp
| 12***11 | Stud; (M8x1.25-Thd)(M8x1.25 Thd Both Ends) | 1 |
| 13***63 | Manifold | 1 |
| 13***64 | Gasket; (Temperature Regulator Housing) | 1 |
139-5321 Lines Gp-Coolant
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 2 |
| 00***89 | Valve As-Drain | 1 |
| 03***70 | Adapter-Pipe | 1 |
170-3766 Lines Gp-Water
| 11***97 | Gasket | 4 |
| 17***64 | Housing & Regulator Group | 1 |
| 17***66 | Lines Group-Water | 1 |
199-7688 Lines Gp-Water
| 10***08 | Flange | 1 |
| 19***59 | Tube As | 1 |
| 19***88 | Lines Group-Water | 1 |
116-5460 Lines Gp-Water -Bypass
| 10***08 | Flange | 1 |
| 10***95 | Tube | 1 |
| 11***60 | Lines Group-Water; -Bypass | 1 |
214-6116 Lines Gp-Water
| 11***97 | Gasket | 4 |
| 21***93 | Housing & Regulator Group | 1 |
| 21***16 | Lines Group-Water | 1 |
118-2808 Lines Gp-Water -Water Pump Inlet Elbow
| 10***35 | Gasket | 1 |
| 10***85 | Elbow; (Water Pump) | 1 |
| 11***08 | Lines Group-Water; -Water Pump Inlet Elbow-Pump | 1 |
234-5595 Motor & Mtg Gp-Hydraulic Fan
| 23***95 | Motor & Mtg Group-Hydraulic Fan | 1 |
| 24***46 | Motor Group-Gear; -Hydraulic Fan | 1 |
| 8T***83 | Bolt (M12x1.75x40mm); (M12x1.75x40-mm) | 2 |
152-6945 Motor & Mtg Gp-Hydraulic Fan
| 15***45 | Motor & Mtg Group-Hydraulic Fan | 1 |
| 28***76 | Motor Group-Gear; -Hydraulic Fan | 1 |
| 8T***83 | Bolt (M12x1.75x40mm); (M12x1.75x40-mm) | 2 |
153-8053 Pump Gp-Water
| 10***09 | Impeller; (Pump) | 1 |
| 10***10 | Gasket | 1 |
| 10***12 | Shaft; (Water Pump) | 1 |
117-2674 Pump Gp-Water
| 11***74 | Pump Group-Water | 1 |
| 15***53 | Pump Group-Water; (Water) | 1 |
| 6V***21 | Bolt; (M8x1.25x80-mm) | 2 |
176-7000 Pump Gp-Water
| 10***10 | Gasket | 1 |
| 14***88 | Seal As; (Water Pump) | 1 |
| 17***95 | Cover-Pump | 1 |
149-0001 Radiator Ar
| 13***20 | Tank Group-Coolant | 1 |
| 13***24 | Fan Group-Suction | 1 |
| 14***01 | Radiator Ar | 1 |
237-5139 Radiator Ar
| 13***20 | Tank Group-Coolant | 1 |
| 13***24 | Fan Group-Suction | 1 |
| 14***35 | Lines Group-Air Conditioner | 1 |
191-9262 Radiator Gp
| 17***22 | Washer; (18x100x20-mm Thk) | 1 |
| 17***93 | Bracket; (Valve Mounting) | 1 |
| 18***84 | Spacer; (16.5x30x3.2-mm Thk) | 2 |
191-9263 Radiator Gp
| 14***59 | Bracket | 1 |
| 16***74 | Core | 1 |
| 16***75 | Support As; (Rh) | 1 |
166-7555 Shroud Gp-Radiator
| 16***55 | Shroud Group-Radiator | 1 |
| 17***77 | Duct-Radiator | 1 |
| 17***79 | Bushing-Rubber | 1 |
199-7495 Tank Gp-Coolant
| 17***02 | Tank As-Coolant | 1 |
| 19***95 | Tank Group-Coolant | 1 |
| 20***36 | Insert | 2 |
139-5320 Tank Gp-Coolant
| 13***20 | Tank Group-Coolant | 1 |
| 17***92 | Strap | 1 |
| 22***75 | Tank Group-Coolant | 1 |
228-4975 Tank Gp-Coolant
| 22***75 | Tank Group-Coolant | 1 |
| 22***76 | Tank As-Coolant | 1 |
| 26***84 | Tube | 1 |
Electrical And Starting System
123-6449 Alarm Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***49 | Alarm Group | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
3e-6328 Alarm Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 3E***28 | Alarm Group; -Caterpillar Monitoring System-Action | 1 |
171-4670 Alternator Gp-Charging
| 16***57 | Bracket | 1 |
| 17***70 | Alternator Group-Charging | 1 |
| 20***32 | Alternator Group-Charging | 1 |
200-2232 Alternator Gp-Charging
| 10***31 | Fan-Alternator; (11-Blade) | 1 |
| 18***34 | Nut-Flange; (5/8-18-Thd) | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 2 |
140-2092 Battery & Wiring Gp
| 03***97 | Boot | 3 |
| 06***44 | Grommet | 1 |
| 11***64 | Cable As | 1 |
232-0193 Battery Gp -Heavy-Duty
| 03***97 | Boot | 1 |
| 06***44 | Grommet | 1 |
| 15***10 | Battery; (12-Volt, 1400-Cca) | 2 |
124-5814 Block Gp-Junction
| 12***14 | Block Group-Junction | 1 |
| 1D***17 | Nut,Plain,Hexagon Starter Motor Assembly | 3 |
| 6V***22 | Tube-Heat Shrink; (25.4-mm Dia)(10-M) | 0 |
149-0077 Circuit Breaker Gp
| 10***25 | Clip | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
124-2674 Connection Gp-Electrical
| 12***74 | Connection Group-Electrical; -Ground | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 1 |
| 6V***64 | Washer-Hard; (8.8x25.5x5-mm Thk) | 1 |
232-5990 Control & Mtg Gp-Engine Elek
| 20***88 | Control Group-Engine Electronic | 1 |
| 23***90 | Control & Mtg Group-Engine Elek | 1 |
| 6I***18 | Spacer; (8.2x12.7x28.7-mm Thk) | 4 |
168-4490 Control & Mtg Gp-Engine Elek
| 16***90 | Control & Mtg Group-Engine Elek | 1 |
| 16***94 | Spacer; (8.5x12.7x54.1-mm) | 2 |
| 17***91 | Control Group-Engine Electronic | 1 |
149-0062 Control & Mtg Gp-Power Train
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 14***62 | Control & Mtg Group-Power Train; -Transmission, Chassis | 1 |
| 16***55 | Control Group-Unprogrammed; (Implement) | 1 |
233-0336 Control & Mtg Gp-Power Train
| 23***36 | Control & Mtg Group-Power Train | 1 |
| 30***87 | Control Group-Unprogrammed; (Transmission) | 1 |
| 6I***18 | Spacer; (8.2x12.7x28.7-mm Thk) | 4 |
210-0849 Control Gp-Engine Electronic
| 21***49 | Control Group-Engine Electronic | 1 |
| 24***04 | Control Group-Engine Electronic | 1 |
348-2379 Control Gp-Engine Electronic
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
| 2L***75 | Terminal; (14-Ga To 16-Ga, No. 8 Screw)(Relay Switch "B" & "S") | 1 |
| 2L***78 | Terminal-Ring; (14-Ga To 16-Ga, 5/16-In Screw) | 1 |
209-9588 Control Gp-Engine Electronic
| 20***88 | Control Group-Engine Electronic | 1 |
| 34***79 | Control Group-Engine Electronic | 1 |
210-0848 Control Gp-Engine Electronic
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
| 21***48 | Control Group-Engine Electronic | 1 |
| 7X***15 | Strap; (Grounding) | 1 |
240-5304 Control Gp-Engine Electronic
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
| 24***04 | Control Group-Engine Electronic | 1 |
| 7X***15 | Strap; (Grounding) | 1 |
178-3091 Control Gp-Engine Electronic
| 17***91 | Control Group-Engine Electronic | 1 |
| 21***48 | Control Group-Engine Electronic | 1 |
322-3604 Control Gp-Engine Electronic
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
| 32***04 | Control Group-Engine Electronic | 1 |
| 7X***15 | Strap; (Grounding) | 1 |
240-5307 Control Gp-Unprogrammed
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
| 24***07 | Control Group-Unprogrammed; -Engine | 1 |
| 7X***15 | Strap; (Grounding) | 1 |
263-8730 Electronics Gp-Monitor -Messenger
| 26***30 | Electronics Group-Monitor; -Messenger | 1 |
| 33***86 | Software Group-Monitor | 1 |
| 33***87 | Service Group-Monitor | 1 |
212-9872 Electronics Gp-Monitor -Caterpillar Monitoring System
| 21***72 | Electronics Group-Monitor; -Caterpillar Monitoring System | 1 |
| 23***37 | Software Group-Monitor; (Caterpillar Monitoring System) | 1 |
| 23***38 | Service Group-Monitor; (Caterpillar Monitoring System) | 1 |
262-5850 Electronics Gp-Monitor -Messenger Display
| 15***59 | Wedge-Plug Lock; (8-Pin) | 1 |
| 15***63 | Wedge-Plug Lock; (6-Pin) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 12 |
153-9628 Electronics Gp-Power Train -Transmission
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 15***28 | Electronics Group-Power Train; -Transmission | 1 |
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
237-5514 Electronics Gp-Power Train -Transmission
| 23***14 | Electronics Group-Power Train; -Transmission | 1 |
| 25***22 | Software Group-Power Train | 1 |
| 25***23 | Service Group-Power Train | 1 |
155-8051 Harness As-Sensor -Bypass, Speed, Timing
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 15***51 | Harness As-Sensor; -Bypass, Speed, Timing | 1 |
3e-6389 Lamp Gp-Dome -With Switch
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 3E***89 | Lamp Group-Dome; -With Switch-Cab, Rh, Lh | 1 |
172-9973 Lamp Gp-Flood -24-Volt, 65-Watt-Cab
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***51 | Screw; (M4x32-mm) | 4 |
| 10***52 | Seal | 1 |
133-6335 Lamp Gp-Flood -24-Volt, 65-Watt-Cab
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***51 | Screw; (M4x32-mm) | 4 |
| 10***52 | Seal | 1 |
260-0161 Lamp Gp-Flood -24-Volt, 65-Watt
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 26***61 | Lamp Group-Flood; -24-Volt, 65-Watt-Rear | 1 |
171-7214 Lamp Gp-Head -High Beam
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***14 | Lamp Group-Head; -24-Volt, 65-Watt | 1 |
| 17***61 | Body Assem. | 1 |
171-7213 Lamp Gp-Head -Low Beam
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***13 | Lamp Group-Head; -24-Volt, 65-Watt | 1 |
| 17***61 | Body Assem. | 1 |
149-5534 Lamp Gp-Signal -Stop, Tail, Turn, Rh
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 13***65 | Lamp; (24-Volt) | 1 |
| 13***48 | Screw-Lens | 2 |
149-5535 Lamp Gp-Signal -Stop, Tail, Turn, Lh
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 13***65 | Lamp; (24-Volt) | 1 |
| 13***48 | Screw-Lens | 2 |
162-5402 Lamp Gp-Signal -Front
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***02 | Lamp Group-Signal; -Front | 1 |
| 5C***90 | Nut; (M6x1-Thd)(Air Inlet Heater) | 3 |
3e-6466 Lamp Gp-Signal -Front Turn
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 3E***66 | Lamp Group-Signal; -Rear Turn, Parking | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 2 |
225-8758 Lamp Gp-Signal -Stop, Tail, Turn
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
| 22***58 | Lamp Group-Signal; -Stop, Tail, Turn | 1 |
117-3915 Motor Gp-Electric -Secondary Steering
| 11***15 | Motor Group-Electric; -Engine Prelubrication-Sec Steering, Brake Release | 1 |
| 6V***01 | Nut; (3/8-16-Thd)(Plate To Rh And Lh Bracket As) | 2 |
| 7X***08 | Washer-Hard; (10.2x16x2-mm Thk) | 2 |
237-6283 Panel Gp-Circuit Breaker
| 0S***70 | Cap Screw (5/8" Long) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
235-2676 Panel Gp-Circuit Breaker
| 11***58 | Washer; (6.5x17x1-mm Thk) | 8 |
| 11***18 | Clip | 1 |
| 11***11 | Socket-Auxiliary Power; (12-Volt)(Power Port) | 1 |
242-4963 Panel Gp-Circuit Breaker
| 0S***70 | Cap Screw (5/8" Long) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
214-8896 Panel Gp-Circuit Breaker
| 0S***70 | Cap Screw (5/8" Long) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
185-1884 Panel Gp-Circuit Breaker
| 17***07 | Harness As-Power | 1 |
| 18***49 | Plate | 1 |
| 18***73 | Plate As | 1 |
160-2443 Sensor Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***43 | Sensor Group-Position; -Brake Pedal | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
266-1467 Sensor Gp-Position -Rotary
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 3 |
| 26***67 | Sensor Group-Position; -Brake Pedal | 1 |
194-6722 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
| 19***22 | Sensor Group-Pressure; -Atmospheric Air | 1 |
194-6724 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 19***26 | Harness As-Sensor; (16-18 Ga Wire)(Engine Oil Temperature) | 3 |
| 19***24 | Sensor Group-Pressure; -Air Inlet Manifold | 1 |
197-8393 Sensor Gp-Pressure
| 16***03 | Sensor Group-Pressure; (Turbocharger Inlet, Rh) | 1 |
| 19***93 | Sensor Group-Pressure; -Atmospheric | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
197-8394 Sensor Gp-Pressure
| 16***05 | Sensor As-Pressure; (Unfiltered Engine Oil) | 1 |
| 19***94 | Sensor Group-Pressure; -Engine Oil | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
178-3082 Sensor Gp-Pressure -Transmission Clutch Latching
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***82 | Sensor Group-Pressure; -Transmission Clutch Latching | 1 |
| 17***44 | Sensor As-Pressure; (Transmission Clutch Latching) | 1 |
194-6725 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
| 19***25 | Sensor Group-Pressure; -Engine Oil | 1 |
197-8395 Sensor Gp-Pressure
| 19***24 | Sensor Group-Pressure; -Air Inlet Manifold | 1 |
| 19***95 | Sensor Group-Pressure; -Air Inlet Manifold | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
161-9925 Sensor Gp-Pressure -Turbocharger Inlet
| 10***13 | Seal; (3 Pin Plug) | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***25 | Sensor Group-Pressure; -Turbocharger Inlet | 1 |
193-0421 Sensor Gp-Speed -Torque Converter Output
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 2 |
| 17***49 | Strap; (Marker) | 1 |
189-5746 Sensor Gp-Speed
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***36 | Pin-Connector; (14-Ga To 18-Ga) | 2 |
| 17***49 | Strap; (Marker) | 1 |
197-8396 Sensor Gp-Speed
| 18***11 | Sensor Group-Speed; (Crankshaft Timing) | 1 |
| 19***96 | Sensor Group-Speed; -Timing, Crankshaft | 1 |
| 20***40 | Seal-O-Ring; (13.94mm Id) | 1 |
197-8397 Sensor Gp-Speed
| 18***01 | Sensor Group-Speed; (Camshaft Timing) | 1 |
| 19***97 | Sensor Group-Speed; -Timing, Camshaft | 1 |
| 20***40 | Seal-O-Ring; (13.94mm Id) | 1 |
134-2252 Sensor Gp-Temperature -Transmission Oil
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***52 | Sensor Group-Temperature; -Transmission Oil-Xmsn, Torque Converter | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
197-8391 Sensor Gp-Temperature
| 13***11 | Sensor Group-Temperature; (Transmission Lubrication Oil) | 1 |
| 13***45 | Pad; (Connector) | 1 |
| 19***91 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
197-8392 Sensor Gp-Temperature
| 13***11 | Sensor Group-Temperature; (Transmission Lubrication Oil) | 1 |
| 13***45 | Pad; (Connector) | 0 |
| 19***92 | Sensor Group-Temperature; -Coolant, Water | 1 |
118-7226 Sensor Gp-Temperature -Transmission Oil
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***26 | Sensor Group-Temperature; -Transmission Oil | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
148-9989 Starting Aid Gp-Ether
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***89 | Starting Aid Group-Ether | 1 |
| 20***63 | Bracket-Angle | 1 |
233-7463 Starting Ar-Cold Weather
| 10***29 | Starting Motor Group-Electric; -Cold Weather | 1 |
| 23***93 | Battery Group; -Heavy-Duty | 1 |
| 23***63 | Starting Ar-Cold Weather | 1 |
207-1556 Starting Motor Gp-Electric
| 0S***97 | Capscrew (1/4 - 28 Nf X 1 Gd8, Hex) | 5 |
| 20***56 | Starting Motor Group-Electric; (24-Volt) | 1 |
| 25***79 | Kit-Solenoid; (24-Volt)(Starting Motor) | 1 |
237-1962 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
| 0S***97 | Capscrew (1/4 - 28 Nf X 1 Gd8, Hex) | 13 |
105-4729 Starting Motor Gp-Electric
| 10***28 | Wire As | 1 |
| 10***29 | Starting Motor Group-Electric; -Cold Weather | 1 |
| 4N***59 | Gasket; (Starting Motor) | 1 |
338-3454 Starting Motor Gp-Electric
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 33***54 | Starting Motor Group-Electric | 1 |
6v-0890 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 13 |
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
197-0986 Starting Motor Gp-Electric
| 19***86 | Starting Motor Group-Electric; (Electric) | 1 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 1 |
| 1S***52 | Terminal-Cable; (00-Ga, 3/8-In Screw) | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 4D***26 | Washer,Lock Starter Ground Cable, Internal And External Teeth | 2 |
| 6V***78 | Nut; (10-32-Thd) | 2 |
| 6V***01 | Nut; (3/8-16-Thd)(Plate To Rh And Lh Bracket As) | 2 |
164-7577 Switch Gp-Bypass -Filter
| 16***77 | Switch Group-Bypass; -Xmsn Lubrication Supply Filter-Xmsn Lubrication Charge Filter-Hoist Screen-Tc, Front Brake Cooling-Transmission Oil Filter-Rear Axle Oil Filter | 1 |
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
175-2308 Switch Gp-Magnetic
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***81 | Switch As-Magnetic; (Start Relay) | 1 |
118-3534 Switch Gp-Magnetic
| 11***34 | Switch Group-Magnetic; -Start Relay | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
254-3783 Switch Gp-Magnetic
| 12***49 | Alarm Group | 1 |
| 17***73 | Lamp Group-Flood; -24-Volt, 65-Watt-Generator Enclosure | 2 |
| 25***83 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
167-0138 Switch Gp-Magnetic -Main Relay
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***38 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
241-8368 Switch Gp-Magnetic
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 24***68 | Switch Group-Magnetic; -Main Power Relay-Main Relay | 1 |
3e-0154 Switch Gp-Magnetic -Secondary Steering Relay
| 17***08 | Switch Group-Magnetic; -24-Volt-Start Relay-Main Relay | 1 |
| 17***09 | Switch Group-Magnetic; -24-Volt-Start Relay | 1 |
| 3E***54 | Switch Group-Magnetic; -Secondary Steering Relay-Engine Prelubrication Relay | 1 |
175-2309 Switch Gp-Magnetic
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***09 | Switch Group-Magnetic; -24-Volt-Start Relay | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
237-5512 Warning Gp-Backup
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 09***42 | Bolt-Socket Head; (M5x0.8thdx50mm) | 2 |
| 09***33 | Bolt-Socket Head; (M5x0.8x20-mm) | 3 |
149-0113 Warning Gp-Backup
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***13 | Warning Group-Backup | 1 |
| 17***73 | Lamp Group-Flood; -24-Volt, 65-Watt-Generator Enclosure | 2 |
149-0078 Wiring Gp-Cab
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 09***42 | Bolt-Socket Head; (M5x0.8thdx50mm) | 2 |
| 09***33 | Bolt-Socket Head; (M5x0.8x20-mm) | 3 |
233-0338 Wiring Gp-Cab
| 22***03 | Module Group-Display; (Automatic Lubrication System) | 1 |
| 23***38 | Wiring Group-Cab | 1 |
254-2024 Wiring Gp-Cab -Automatic Lubrication
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***49 | Fitting As; (Quick Disconnect) | 1 |
197-6913 Wiring Gp-Electronic Control
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 4 |
| 11***85 | Seal-O-Ring; (13.94mm Id) | 2 |
171-1103 Wiring Gp-Engine
| 06***47 | Spacer; (12.45x19.01x28.6-mm Thk) | 1 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
254-7623 Wiring Gp-Front
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
148-9960 Wiring Gp-Front
| 14***60 | Wiring Group-Front | 1 |
| 17***58 | Clamp | 2 |
| 25***29 | Harness As-Front | 1 |
149-0128 Wiring Gp-Lighting -Rear
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
237-5509 Wiring Gp-Lighting -Rear
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
252-9556 Wiring Gp-Lighting -Rear
| 06***47 | Spacer; (12.45x19.01x28.6-mm Thk) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
229-9726 Wiring Gp-Machine
| 06***47 | Spacer; (12.45x19.01x28.6-mm Thk) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
254-2025 Wiring Gp-Rear
| 10***33 | Kit; (Receptacle) (Includes Receptacle As) | 0 |
| 25***25 | Wiring Group-Rear | 1 |
| 2V***16 | Clip; (9.52mm Id) | 4 |
117-2760 Wiring Gp-Unit Injector
| 11***60 | Wiring Group-Unit Injector | 1 |
257-4183 Wiring Gp-Unit Injector
| 13***62 | Frame Group-Front | 1 |
| 13***20 | Gear Group-Output Transfer | 1 |
| 13***21 | Lines Group-Coolant | 1 |
Engine Arrangement
150-8249 Engine & Transmission Ar
| 13***24 | Transmission Ar | 1 |
| 13***23 | Lines Group-Air | 1 |
| 14***17 | Air Cleaner Group | 1 |
167-4381 Engine Ar
| 11***13 | Filler Group-Engine Oil | 1 |
| 11***83 | Cylinder Block Group | 1 |
| 11***85 | Cover Group-Cylinder Block | 1 |
Frame And Body
194-9231 Actuator Gp-Power
| 18***17 | Plate | 1 |
| 18***18 | Plate | 1 |
| 19***47 | Plate | 1 |
194-4333 Baffle Gp-Radiator
| 14***26 | Guide As | 2 |
| 14***27 | Buffer-Rubber | 4 |
| 14***34 | Shim; (3-mm Thk) | 12 |
150-8294 Body Gp-Truck
| 14***26 | Guide As | 2 |
| 14***27 | Buffer-Rubber | 4 |
| 14***34 | Shim; (3-mm Thk) | 8 |
224-9512 Body Gp-Truck
| 17***66 | Box Group-Battery; -Lh | 1 |
| 19***62 | Box Group-Battery; -Rh | 1 |
| 22***12 | Body Group-Truck | 1 |
178-0166 Box Gp-Battery -Lh
| 17***66 | Box Group-Battery; -Lh | 1 |
| 19***64 | Box As; (Rh) | 1 |
| 7X***15 | Washer-Hard; (17x35x5-mm Thk) | 4 |
149-0040 Box Gp-Battery
| 14***40 | Box Group-Battery | 1 |
| 18***54 | Plate-Cover | 1 |
| 19***63 | Box As; (Lh) | 1 |
190-4962 Box Gp-Battery -Rh
| 17***95 | Bumper | 1 |
| 19***62 | Box Group-Battery; -Rh | 1 |
| 23***23 | Bolt-Socket Head; (M16x2x45-mm) | 4 |
170-7093 Bumper Gp-Front
| 17***93 | Bumper Group-Front | 1 |
| 18***09 | Hinge As | 1 |
| 19***37 | Plate As | 1 |
208-7441 Cover Gp-Access -Fast Fill
| 17***37 | Cover; (Fender, Lh) | 1 |
| 17***38 | Cover; (Fender, Rh) | 1 |
| 17***48 | Extension-Lh | 1 |
249-8142 Extension Gp-Fender
| 09***81 | Spacer; (10.5x20x10.0mm Thk) | 8 |
| 11***25 | Screw-Flat Head; (M6x1x25-mm) | 6 |
| 16***13 | Support As | 1 |
178-8406 Extension Gp-Fender
| 17***37 | Cover; (Fender, Lh) | 1 |
| 17***38 | Cover; (Fender, Rh) | 1 |
| 17***06 | Extension Group-Fender | 1 |
147-6831 Fender & Support Gp
| 09***81 | Spacer; (10.5x20x10.0mm Thk) | 8 |
| 10***97 | Bolt-Socket Head; (M12x1.75x50-mm) | 2 |
| 14***31 | Fender & Support Group | 1 |
242-5567 Fender & Support Gp
| 20***52 | Extension; (Lh) | 1 |
| 20***53 | Cover; (Lh) | 1 |
| 20***54 | Extension; (Rh) | 1 |
210-5887 Fender Gp
| 13***04 | Suspension Group-Rear Equalizer | 1 |
| 13***65 | Frame Group-Rear | 1 |
| 21***87 | Fender Group | 1 |
196-9226 Frame Ar-Rear
| 13***04 | Suspension Group-Rear Equalizer | 1 |
| 19***26 | Frame Rear Axle | 1 |
| 20***27 | Frame Group-Rear | 1 |
207-4726 Frame Ar-Rear
| 13***70 | Frame As-Engine | 1 |
| 16***55 | Bracket-Steering; (Lh) | 1 |
| 16***56 | Bracket-Steering; (Rh) | 1 |
149-0131 Frame Ar-Rear
| 13***04 | Suspension Group-Rear Equalizer | 1 |
| 14***31 | Frame Rear Axle | 1 |
| 19***27 | Frame Group-Rear | 1 |
138-1462 Frame Gp-Front
| 11***76 | Bushing | 1 |
| 13***62 | Frame Group-Front | 1 |
| 13***71 | Frame As | 1 |
207-4727 Frame Gp-Rear
| 17***71 | Guard As-Transmission | 1 |
| 17***70 | Plate | 1 |
| 17***37 | Plate | 1 |
196-9227 Frame Gp-Rear
| 11***76 | Bushing | 1 |
| 14***50 | Bushing | 2 |
| 14***03 | Pin | 1 |
138-1465 Frame Gp-Rear
| 11***76 | Bushing | 1 |
| 13***65 | Frame Group-Rear | 1 |
| 14***50 | Bushing | 2 |
149-0153 Guard Gp-Crankcase
| 14***59 | Guard; (Rh) | 1 |
| 14***60 | Guard; (Lh) | 1 |
| 14***53 | Guard Group-Crankcase | 1 |
137-5681 Guard Gp-Lines -Axle, Center, Rear
| 13***81 | Guard Group-Lines; -Axle, Center, Rear | 1 |
| 17***54 | Guard; (Rh) | 1 |
| 17***55 | Guard; (Lh) | 1 |
148-9967 Guard Gp-Lines -Axle, Front
| 14***67 | Guard Group-Lines; -Axle, Front | 1 |
| 16***93 | Plate-Mounting | 2 |
| 16***26 | Plate As-Mounting; (Lh) | 1 |
170-1675 Guard Gp-Mud
| 16***84 | Guard As; (Rear, Lh) | 1 |
| 16***86 | Guard As; (Rh) | 1 |
| 17***75 | Guard Group-Mud | 1 |
193-8023 Guard Gp-Platform
| 19***23 | Guard Group-Platform | 1 |
| 24***74 | Guard As; (Rear, Lh) | 1 |
| 24***75 | Guard As; (Rh) | 1 |
149-0105 Guard Gp-Platform
| 14***05 | Guard Group-Platform | 1 |
| 25***70 | Bracket As | 1 |
| 25***73 | Bracket As | 1 |
242-6979 Guard Gp-Platform
| 17***19 | Cover As-Top | 1 |
| 18***01 | Bracket As | 2 |
| 18***02 | Angle | 1 |
196-3538 Guard Gp-Radiator
| 08***60 | Washer; (5.3x25x1.6-mm Thk) | 24 |
| 19***38 | Guard Group-Radiator | 1 |
| 19***40 | Grill; (Bottom) | 1 |
150-8272 Guard Gp-Radiator
| 15***72 | Guard Group-Radiator | 1 |
| 17***19 | Cover As-Top | 1 |
| 18***01 | Bracket As | 2 |
196-5661 Guard Gp-Radiator
| 08***60 | Washer; (5.3x25x1.6-mm Thk) | 24 |
| 19***40 | Grill; (Bottom) | 1 |
| 19***61 | Guard Group-Radiator | 1 |
253-5143 Guard Gp-Radiator
| 13***72 | Hitch As | 1 |
| 15***61 | Pivot Head | 1 |
| 15***62 | Tube | 1 |
249-3664 Guard Gp-Radiator
| 08***60 | Washer; (5.3x25x1.6-mm Thk) | 24 |
| 19***40 | Grill; (Bottom) | 1 |
| 20***40 | Grill; (Top) | 1 |
138-1461 Hitch Gp-Oscillating
| 13***61 | Hitch Group-Oscillating | 1 |
| 14***04 | Guard Group-Window | 1 |
| 14***05 | Guard Group-Platform | 1 |
150-8269 Hood & Guard Ar
| 15***69 | Hood & Guard Ar | 1 |
| 17***33 | Hood Group-Engine | 1 |
| 17***38 | Frame As-Hood | 1 |
149-0107 Hood Gp-Engine
| 14***07 | Hood Group-Engine | 1 |
| 17***33 | Hood Group-Engine | 1 |
| 17***24 | Spacer; (26x50x2-mm Thk) | 12 |
171-5633 Hood Gp-Engine
| 17***33 | Hood Group-Engine | 1 |
| 18***68 | Panel As; (Top) | 1 |
| 18***71 | Panel As; (Rh) | 1 |
137-5658 Liner Gp-Body
| 13***58 | Liner Group-Body | 1 |
| 23***01 | Plate | 1 |
| 23***02 | Plate | 1 |
137-5657 Liner Gp-Body
| 13***57 | Liner Group-Body | 1 |
| 13***10 | Plate-Liner | 1 |
| 13***11 | Plate-Liner | 1 |
232-0509 Liner Gp-Body
| 17***64 | Elbow As | 11 |
| 17***75 | Connector; (Reducer) | 2 |
| 22***97 | Valve Group-Lube Distribution; -Front, 12-Injector | 1 |
220-7495 Lines Gp-Automatic Lubrication -Front
| 22***95 | Lines Group-Automatic Lubrication; -Front | 1 |
| 22***71 | Channel As | 1 |
| 22***83 | Hose As | 2 |
254-2023 Lines Gp-Automatic Lubrication -Rear
| 17***09 | Hose As | 1 |
| 18***70 | Hose As | 2 |
| 18***71 | Hose As | 3 |
220-7496 Lines Gp-Automatic Lubrication -Main
| 22***96 | Lines Group-Automatic Lubrication; -Main | 1 |
| 22***98 | Lines Group-Lubrication; -7-Injector, Front | 1 |
| 22***99 | Lines Group-Lubrication; -Rear | 1 |
196-9240 Lines Gp-Grease -Axle Pivot
| 17***64 | Elbow As | 7 |
| 19***40 | Lines Group-Grease; -Axle Pivot | 1 |
| 22***02 | Valve Group-Lube Distribution; -7-Injector | 1 |
148-9963 Lines Gp-Grease -Suspension
| 14***63 | Lines Group-Grease; -Suspension | 1 |
| 17***09 | Hose As | 1 |
| 18***70 | Hose As | 2 |
149-0112 Lines Gp-Grease -Oscillating Hitch
| 03***61 | Elbow; (45 Degree) | 1 |
| 12***74 | Clip-Loop; (12.7mm Id) | 5 |
| 13***17 | Hose As-Grease | 1 |
196-9235 Lines Gp-Grease -Oscillating Hitch
| 12***74 | Clip-Loop; (12.7mm Id) | 10 |
| 19***35 | Lines Group-Grease; -Oscillating Hitch | 1 |
| 20***62 | Hose As | 1 |
170-7094 Lines Gp-Grease -Axle Pivot
| 17***94 | Lines Group-Grease; -Axle Pivot | 1 |
| 20***34 | Hose As | 3 |
| 2N***87 | Elbow-Flared Needed For Customer; (Used Without Brakesaver) | 3 |
255-3326 Lines Gp-Lubrication
| 19***65 | Pin As | 2 |
| 19***68 | Bar | 1 |
| 19***26 | Lanyard | 2 |
220-7500 Lines Gp-Lubrication -7-Injector, With Switch
| 16***30 | Hose; (208-cm Each) | 0 |
| 17***64 | Elbow As | 2 |
| 22***00 | Lines Group-Lubrication; -7-Injector, With Switch | 1 |
220-7498 Lines Gp-Lubrication -7-Injector, Front
| 22***98 | Lines Group-Lubrication; -7-Injector, Front | 1 |
| 22***85 | Hose As | 2 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 5 |
220-7499 Lines Gp-Lubrication -Rear
| 17***63 | Connector As | 2 |
| 21***46 | Spacer; (13.3x21.3x25-mm Thk) | 1 |
| 22***99 | Lines Group-Lubrication; -Rear | 1 |
149-0151 Link Gp-Steering Frame Lock
| 14***51 | Link Group-Steering Frame Lock | 1 |
| 24***67 | Plate As | 4 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 4 |
243-4468 Lock Gp-Steering Cylinder
| 22***94 | Pump & Mtg Group-Lubrication | 1 |
| 22***95 | Lines Group-Automatic Lubrication; -Front | 1 |
| 22***96 | Lines Group-Automatic Lubrication; -Main | 1 |
254-2022 Lubrication Ar -Front
| 25***22 | Lubrication Ar; -Front | 2 |
| 25***23 | Lines Group-Automatic Lubrication; -Rear | 1 |
| 25***24 | Wiring Group-Cab; -Automatic Lubrication | 1 |
251-7321 Lubrication Ar-Automatic
| 14***26 | Guide As | 2 |
| 14***27 | Buffer-Rubber | 4 |
| 14***34 | Shim; (3-mm Thk) | 12 |
208-0713 Mounting Gp-Truck Body
| 17***98 | Plate | 1 |
| 17***99 | Cover | 1 |
| 17***00 | Plate | 1 |
196-2181 Panel Gp-Fender
| 15***54 | Pin As; (Drawbar) | 2 |
| 18***31 | Pin-Spring | 2 |
| 19***81 | Panel Group-Fender | 1 |
171-7138 Panel Gp-Fender
| 17***00 | Plate | 1 |
| 17***01 | Seal; (5.Omm Thk) | 1 |
| 17***38 | Panel Group-Fender | 1 |
149-0154 Pin Gp-Hitch -Towing
| 14***54 | Pin Group-Hitch; -Towing | 1 |
| 18***04 | Pump Group-Lubrication; -Automatic Lubrication Control | 1 |
| 21***46 | Spacer; (13.3x21.3x25-mm Thk) | 4 |
220-7494 Pump & Mtg Gp-Lubrication
| 19***46 | Lock Group | 1 |
| 19***47 | Cover Group; (Tank) | 1 |
| 19***48 | Seal-O-Ring | 1 |
184-0704 Pump Gp-Lubrication -Automatic Lubrication Control
| 18***04 | Pump Group-Lubrication; -Automatic Lubrication Control | 1 |
| 19***81 | Step As | 2 |
| 6V***87 | Locknut; (M12x1.75-Thd) | 4 |
242-8224 Step Gp
| 21***89 | Seal-Rubber; (0.895-M Each) | 0 |
| 21***90 | Seal-Rubber; (0.682-M Each) | 0 |
| 21***91 | Panel | 1 |
149-0042 Step Gp
| 14***42 | Step Group | 1 |
| 24***45 | Step | 2 |
| 6V***87 | Locknut; (M12x1.75-Thd) | 4 |
217-8587 Suppression Ar-Sound
| 21***87 | Suppression Ar-Sound | 1 |
| 21***89 | Seal-Rubber; (0.895-M Each) | 0 |
| 21***90 | Seal-Rubber; (0.682-M Each) | 0 |
149-0145 Tailgate Ar
| 12***35 | Bolt; (1.125-7x190.5-mm) | 2 |
| 14***45 | Bracket As | 1 |
| 14***50 | Link As | 1 |
233-0823 Tailgate Gp -Scissors
| 15***12 | Absorber As-Shock | 2 |
| 15***69 | Shim; (3-mm Thk) | 4 |
| 16***85 | Boss | 8 |
159-7405 Tailgate Gp -Scissors
| 15***12 | Absorber As-Shock | 2 |
| 15***69 | Shim; (3-mm Thk) | 4 |
| 15***05 | Tailgate Group; -Scissors | 1 |
137-9621 Tailgate Gp
| 13***21 | Tailgate Group | 1 |
| 15***07 | Plate As-Mounting | 2 |
| 15***72 | Arm As | 1 |
149-0106 Tilt Gp-Hood
| 11***09 | Hinge Assem. | 1 |
| 12***63 | Plug As-Connector; (1-Pin) | 1 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 1 |
220-7502 Valve Gp-Lube Distribution -7-Injector
| 16***17 | Clamp As | 2 |
| 16***23 | Plate As | 1 |
| 17***83 | Accumulator Group-Brake; -Charged | 2 |
220-7501 Valve Gp-Lube Distribution -Rear, 7-Injector
| 16***30 | Hose; (208-cm Each) | 0 |
| 17***18 | Injector-Grease; (No. 8)(Articulated Hitch Bearing, Lower) | 2 |
| 17***24 | Plug | 7 |
220-7497 Valve Gp-Lube Distribution -Front, 12-Injector
| 16***30 | Hose; (208-cm Each) | 0 |
| 17***18 | Injector-Grease; (No. 8)(Articulated Hitch Bearing, Lower) | 2 |
| 17***20 | Valve; (Pressure Switch) | 1 |
Fuel System
285-1202 Adapter Gp-Fast Fill Fuel
| 10***84 | Bolt-Socket Head; (M10x1.5x25-mm) | 6 |
| 14***38 | Coupling-Permanent | 2 |
| 1H***28 | Seal (3.73 In. Inside Diameter) | 1 |
149-0086 Control Gp-Governor
| 14***86 | Control Group-Governor | 1 |
| 16***12 | Grommet-Split | 1 |
| 16***92 | Pedal Group-Governor | 1 |
116-5436 Filter Gp-Fuel
| 11***36 | Filter Group-Fuel; -Secondary | 1 |
| 1R***62 | Filter As-Fuel; (Advanced Efficiency)(Secondary) | 1 |
133-5671 Filter Gp-Water Sep & Fuel
| 12***75 | Bowl As-Water Collection; (Water Separator, Fuel Filter) | 1 |
| 13***71 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 13***73 | Element; (Filter) (Fuel/Water Separator) (Primary) | 1 |
203-7685 Injector Gp-Fuel
| 11***84 | Seal-O-Ring; (32.99mm Id) | 1 |
| 20***85 | Injector Group-Fuel | 1 |
| 21***98 | Seal-O-Ring; (34.56mm Id) | 1 |
350-7555 Injector Gp-Fuel
| 11***84 | Seal-O-Ring; (32.99mm Id) | 1 |
| 21***98 | Seal-O-Ring; (34.56mm Id) | 1 |
| 35***55 | Injector Group-Fuel | 1 |
170-5252 Injector Gp-Fuel
| 11***84 | Seal-O-Ring; (32.99mm Id) | 1 |
| 17***52 | Injector Group-Fuel | 1 |
| 9X***17 | Seal-O-Ring; (9.6mm Id) | 1 |
212-3463 Injector Gp-Fuel
| 11***84 | Seal-O-Ring; (32.99mm Id) | 1 |
| 21***63 | Injector Group-Fuel | 1 |
| 21***98 | Seal-O-Ring; (34.56mm Id) | 1 |
149-0018 Lines Gp-Fuel
| 13***71 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 3 |
233-6663 Lines Gp-Fuel
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 1 |
| 12***79 | Manifold; (Fuel) | 1 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 1 |
116-5400 Lines Gp-Fuel Injection
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 1 |
| 11***00 | Lines Group-Fuel Injection | 1 |
| 11***16 | Hose Assem. | 1 |
116-5428 Pump & Mtg Gp-Fuel Transfer
| 09***70 | Washer-Sealing | 2 |
| 11***17 | Tube As; (Fuel Supply) | 1 |
| 11***28 | Pump & Mtg Group-Fuel Transfer; (Fuel Transfer) | 1 |
189-0351 Pump Gp-Fuel Injection
| 15***01 | Bolt; (8x1.25x7-mm)(M8x1.25x70mm) | 1 |
| 18***51 | Pump Group-Fuel Injection | 1 |
| 35***55 | Injector Group-Fuel | 1 |
130-0802 Pump Gp-Fuel Injection
| 13***02 | Pump Group-Fuel Injection; (Fuel Injection) | 1 |
| 15***01 | Bolt; (8x1.25x7-mm)(M8x1.25x70mm) | 1 |
| 21***63 | Injector Group-Fuel | 1 |
116-5411 Pump Gp-Fuel Priming -Hand
| 11***11 | Pump Group-Fuel Priming; -Hand | 1 |
| 13***41 | Pump Group-Fuel Priming; (Hand) | 1 |
| 1P***36 | Gasket; (Fuel Priming Pump)(Fuel Priming Pump) | 1 |
247-1730 Tank & Mtg Gp-Fuel -Fast Fill
| 24***30 | Tank & Mtg Group-Fuel; -Fast Fill | 1 |
| 24***31 | Tank Group-Fuel; -Fast Fill | 1 |
| 7X***15 | Washer-Hard; (17x35x5-mm Thk) | 1 |
197-1540 Tank & Mtg Gp-Fuel -Fast Fill
| 17***85 | Cap | 2 |
| 19***40 | Tank & Mtg Group-Fuel; -Fast Fill | 1 |
| 19***41 | Tank Group-Fuel; -Fast Fill | 1 |
140-2095 Tank & Mtg Gp-Fuel
| 14***95 | Tank & Mtg Group-Fuel | 1 |
| 14***96 | Tank Group-Fuel | 1 |
| 17***85 | Cap | 2 |
223-9608 Tank & Mtg Gp-Fuel
| 22***08 | Tank & Mtg Group-Fuel | 1 |
| 22***10 | Tank & Mtg Group-Fuel | 1 |
| 7X***15 | Washer-Hard; (17x35x5-mm Thk) | 1 |
223-9610 Tank & Mtg Gp-Fuel
| 19***15 | Gauge Group-Fuel Level; -Tank | 1 |
| 1H***06 | Screw-Purge (1/2-20x1.625in); (1/2-20x1.625-In) | 1 |
| 22***34 | Tank As-Fuel | 1 |
225-8747 Tank & Mtg Gp-Fuel -Fast Fill
| 22***46 | Tank Group-Fuel; -Fast Fill | 1 |
| 22***47 | Tank & Mtg Group-Fuel; -Fast Fill | 1 |
| 22***63 | Plate-Clamp | 2 |
208-5678 Tank Ar-Fuel -Fast Fill
| 19***40 | Tank & Mtg Group-Fuel; -Fast Fill | 1 |
| 20***78 | Tank Ar-Fuel; -Fast Fill | 1 |
| 20***41 | Cover Group-Access; -Fast Fill | 1 |
247-1728 Tank Ar-Fuel -Fast Fill
| 24***65 | Cover-Tank Rh | 1 |
| 24***28 | Tank Ar-Fuel; -Fast Fill | 1 |
| 24***30 | Tank & Mtg Group-Fuel; -Fast Fill | 1 |
225-8748 Tank Ar-Fuel -Fast Fill
| 18***09 | Hinge As | 1 |
| 22***33 | Cover; (Rh) | 1 |
| 22***47 | Tank & Mtg Group-Fuel; -Fast Fill | 1 |
225-8746 Tank Gp-Fuel -Fast Fill
| 09***70 | Bolt-Socket Hd; (M12 X 1.75 X 45) | 4 |
| 19***15 | Gauge Group-Fuel Level; -Tank | 1 |
| 1H***28 | Seal (3.73 In. Inside Diameter) | 1 |
140-2096 Tank Gp-Fuel
| 14***96 | Tank Group-Fuel | 1 |
| 19***15 | Gauge Group-Fuel Level; -Tank | 1 |
| 1H***06 | Screw-Purge (1/2-20x1.625in); (1/2-20x1.625-In) | 1 |
247-1731 Tank Gp-Fuel -Fast Fill
| 09***70 | Bolt-Socket Hd; (M12 X 1.75 X 45) | 4 |
| 19***15 | Gauge Group-Fuel Level; -Tank | 1 |
| 1H***28 | Seal (3.73 In. Inside Diameter) | 1 |
197-1541 Tank Gp-Fuel -Fast Fill
| 19***15 | Gauge Group-Fuel Level; -Tank | 1 |
| 19***41 | Tank Group-Fuel; -Fast Fill | 1 |
| 19***42 | Tank As-Fuel | 1 |
233-6742 Valve Gp-Check -Fuel
| 23***42 | Valve Group-Check; -Fuel Filter | 1 |
| 23***81 | Seal-O-Ring | 1 |
| 28***25 | Valve Group-Check; -Fuel | 1 |
238-0296 Valve Gp-Check -Fuel
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 23***96 | Valve Group-Check; -Fuel Filter | 1 |
| 6V***23 | Ring; (Backup) (13.16mm Id) | 1 |
281-2725 Valve Gp-Check -Fuel
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 28***25 | Valve Group-Check; -Fuel | 1 |
| 6V***23 | Ring; (Backup) (13.16mm Id) | 1 |
Hydraulic System
196-2403 Actuator Gp-Pilot Control -Lower-Hoist Raise
| 12***85 | Core As-Hydraulic Oil Cooler | 1 |
| 19***03 | Actuator Group-Pilot Control; -Lower-Hoist Raise | 1 |
| 19***77 | Bracket | 1 |
192-6443 Actuator Gp-Pilot Control -Upper-Hoist Lower
| 12***54 | Spacer; (29x36x7-mm Thk) | 1 |
| 14***97 | Spring | 1 |
| 14***98 | Spring | 1 |
141-5502 Actuator Gp-Pilot Control -Hoist Lower
| 07***41 | Seal; (30.3mm Od) | 1 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 12 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
141-5503 Actuator Gp-Pilot Control -Hoist Raise
| 14***97 | Spring | 1 |
| 14***98 | Spring | 1 |
| 14***03 | Actuator Group-Pilot Control; -Hoist Raise | 1 |
171-1961 Cooler & Mtg Gp-Hydraulic Oil
| 12***96 | Adapter | 2 |
| 12***36 | Pin As | 2 |
| 15***53 | Pin; (Hoist) | 2 |
152-2703 Cylinder & Mtg Gp-Hoist
| 15***11 | Cylinder Group-Tailgate | 1 |
| 15***03 | Cylinder & Mtg Group-Hoist | 1 |
| 15***87 | Bracket-Support | 1 |
137-9623 Cylinder & Mtg Gp-Tailgate
| 06***15 | Bearing-Self-Aligning | 2 |
| 13***23 | Cylinder & Mtg Group-Tailgate | 1 |
| 14***39 | Rod As | 1 |
241-4062 Cylinder Gp-Hoist
| 15***33 | Cylinder As | 1 |
| 15***37 | Piston | 1 |
| 15***38 | Head | 1 |
151-2611 Cylinder Gp-Tailgate
| 13***93 | Mounting Group-Rops | 1 |
| 13***94 | Cab Ar | 1 |
| 14***92 | Battery & Wiring Group | 1 |
150-8263 Hydraulic Ar-Machine
| 03***46 | Elbow, 90 Deg Adj., 1/4in. J.I.C. X 7/16in.-14 Str. Thd. | 1 |
| 03***93 | Adaptor (5wd1-200 And 4sd1-159). | 1 |
| 15***63 | Hydraulic Ar-Machine | 1 |
323-4207 Lines Gp-Check Valve
| 12***99 | Manifold | 1 |
| 14***33 | Hose As | 1 |
| 14***22 | Adapter; (-10orb/-12orfs) | 1 |
149-0006 Lines Gp-Drain
| 12***99 | Manifold | 1 |
| 14***33 | Hose As | 1 |
| 14***22 | Adapter; (-10orb/-12orfs) | 1 |
149-0017 Lines Gp-Drain -Oil Pan
| 10***66 | Hose As | 1 |
| 14***26 | Hose As | 1 |
| 14***22 | Adapter; (-10orb/-12orfs) | 1 |
234-5606 Lines Gp-Drain
| 11***64 | Valve Group-Check; -Hoist Lines | 1 |
| 11***73 | Bolt-12 Point Head; (M10x1.5x35-mm) | 8 |
| 14***87 | Valve Group-Lowering Control; (Truck Body) | 1 |
208-3535 Lines Gp-Hoist
| 11***73 | Bolt-12 Point Head; (M10x1.5x35-mm) | 16 |
| 14***11 | Plug Group | 1 |
| 17***86 | Manifold | 1 |
234-5604 Lines Gp-Hoist
| 11***80 | Hose As | 1 |
| 12***86 | Hose As | 2 |
| 13***02 | Hose As | 1 |
149-0142 Lines Gp-Hoist
| 14***13 | Adapter Group | 1 |
| 14***27 | Connector Group | 3 |
| 14***35 | Connect Group; (Each Includes) | 2 |
149-0005 Lines Gp-Hoist
| 11***73 | Bolt-12 Point Head; (M10x1.5x35-mm) | 8 |
| 14***25 | Connector As. | 1 |
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 1 |
210-5882 Lines Gp-Hydraulic Fan
| 11***80 | Hose As | 1 |
| 12***86 | Hose As | 2 |
| 13***02 | Hose As | 1 |
234-5610 Lines Gp-Hydraulic Fan
| 14***16 | Connector Group | 1 |
| 14***25 | Connector As. | 6 |
| 14***51 | Elbow Group | 1 |
149-0010 Lines Gp-Hydraulic Fan
| 11***80 | Hose As | 1 |
| 12***86 | Hose As | 2 |
| 13***02 | Hose As | 1 |
225-8741 Lines Gp-Pilot
| 11***43 | Hose As | 1 |
| 14***25 | Connector As. | 6 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
234-5608 Lines Gp-Pilot
| 12***30 | Fitting Group-Hydraulic; (Quick Disconnect) | 8 |
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 1 |
| 14***67 | Elbow Group; (Each Includes) | 2 |
149-0008 Lines Gp-Pilot
| 14***25 | Connector As. | 5 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***51 | Elbow Group | 1 |
184-6320 Lines Gp-Pressure Test
| 12***30 | Fitting Group-Hydraulic; (Quick Disconnect) | 9 |
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 1 |
| 14***67 | Elbow Group; (Each Includes) | 2 |
186-4062 Lines Gp-Pressure Test -Output Transfer Gear
| 12***30 | Fitting Group-Hydraulic; (Quick Disconnect) | 10 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***38 | Adapter, -6 Orb / Orfs X-Long | 1 |
234-5611 Lines Gp-Pressure Test
| 14***35 | Connect Group; (Each Includes) | 1 |
| 14***55 | Elbow As. | 1 |
| 14***62 | Elbow Group | 1 |
149-0004 Lines Gp-Pump
| 11***45 | Hose As | 1 |
| 12***30 | Fitting Group-Hydraulic; (Quick Disconnect) | 1 |
| 14***27 | Connector Group | 1 |
234-5603 Lines Gp-Pump
| 14***92 | Elbow; (-12 Orfs/-12 Orfs Swivel) | 1 |
| 16***16 | Valve Group-Check | 1 |
| 17***48 | Hose As | 1 |
175-2158 Lines Gp-Return
| 16***16 | Valve Group-Check | 1 |
| 17***23 | Elbow As | 1 |
| 17***58 | Lines Group-Return | 1 |
234-5609 Lines Gp-Return
| 12***12 | Hose As | 1 |
| 12***13 | Hose As | 1 |
| 13***10 | Valve Group-Counterbalance; -Tailgate | 1 |
171-7584 Lines Gp-Tailgate
| 09***95 | Pin, Dowel | 4 |
| 13***90 | Cover | 1 |
| 13***42 | Flange | 1 |
285-6876 Motor Gp-Gear -Hydraulic Fan
| 21***67 | Pump Group-Gear; -Hoist | 1 |
| 28***76 | Motor Group-Gear; -Hydraulic Fan | 1 |
| 5F***06 | Packing,Preformed Pump Mtg Part Of Kit P/N 5r***25 | 1 |
240-6746 Motor Gp-Gear -Hydraulic Fan
| 1B***14 | Key-Woodruff | 1 |
| 20***93 | Valve-Thermostat | 1 |
| 24***46 | Motor Group-Gear; -Hydraulic Fan | 1 |
148-9993 Pump & Mtg Gp-Hoist
| 14***93 | Pump & Mtg Group-Hoist | 1 |
| 24***47 | Pump Group-Piston; -Hoist, Steering-Brake, Fan, Hoist | 2 |
| 5F***06 | Packing,Preformed Pump Mtg Part Of Kit P/N 5r***25 | 2 |
234-5597 Pump & Mtg Gp-Hydraulic -Brake, Fan, Hoist, Steering
| 19***75 | Pump Group-Gear; -Hydraulic Fan | 1 |
| 1H***27 | Seal 10.1 cm(3.984 In.) I.D. | 1 |
| 23***97 | Pump & Mtg Group-Hydraulic; -Brake, Fan, Hoist, Steering | 1 |
148-9996 Pump & Mtg Gp-Hydraulic Fan
| 09***07 | Nut; (M12x1.75-Thd) | 4 |
| 13***30 | Washer; (12.5x18x1.5-mm Thk) | 4 |
| 14***96 | Pump & Mtg Group-Hydraulic Fan | 1 |
218-2167 Pump Gp-Gear -Hoist
| 10***07 | Bolt-Socket Head; (M14x2x55-mm) | 4 |
| 12***42 | Swashplate As | 1 |
| 13***16 | Valve Group-Pump Control; -Pressure, Flow Compensator-Fan, Impl Pilot, Axle Cooler | 1 |
192-3275 Pump Gp-Gear -Hydraulic Fan
| 15***67 | Seal-Lip Type | 2 |
| 19***75 | Pump Group-Gear; -Hydraulic Fan | 1 |
| 22***07 | Plate-Pressure; (Top) | 1 |
172-9322 Pump Gp-Piston -Brake
| 10***07 | Bolt-Socket Head; (M14x2x55-mm) | 4 |
| 12***42 | Swashplate As | 1 |
| 13***23 | Plug-Break Off | 1 |
152-2914 Pump Gp-Piston -Steering
| 09***11 | Seal-O-Ring (Id=84.40mm) | 1 |
| 11***16 | Seal-O-Ring | 4 |
| 13***23 | Plug-Break Off | 1 |
240-2647 Pump Gp-Piston -Hoist, Steering-Brake, Fan, Hoist
| 18***24 | Kit-Piston | 1 |
| 18***25 | Barrel | 1 |
| 18***27 | Plate | 1 |
224-4430 Pump Gp-Piston -Steering
| 10***07 | Bolt-Socket Head; (M14x2x55-mm) | 4 |
| 12***42 | Swashplate As | 1 |
| 13***16 | Valve Group-Pump Control; -Pressure, Flow Compensator-Fan, Impl Pilot, Axle Cooler | 1 |
192-9204 Rotating Gp-Pump
| 16***79 | Pin | 3 |
| 19***04 | Rotating Group-Pump; -Brake | 1 |
| 19***19 | Plate | 1 |
244-1959 Rotating Gp-Pump -Brake, Fan, Hoist
| 17***96 | Tank Group-Hydraulic | 1 |
| 24***59 | Rotating Group-Pump; -Brake, Fan, Hoist | 1 |
| 7X***75 | Bolt-Plt; (M16 X 2.0 X 130) | 2 |
192-9218 Rotating Gp-Pump
| 16***79 | Pin | 3 |
| 19***18 | Rotating Group-Pump; -Steering | 1 |
| 19***25 | Plate | 1 |
140-2093 Tank & Mtg Gp-Hydraulic
| 14***93 | Tank & Mtg Group-Hydraulic | 1 |
| 17***96 | Tank Group-Hydraulic | 1 |
| 7X***15 | Washer-Hard; (17x35x5-mm Thk) | 3 |
234-5599 Tank & Mtg Gp-Hydraulic
| 11***85 | Screen; (Hydraulic Tank Supply) | 1 |
| 12***47 | Diffuser As | 1 |
| 12***31 | Cover-Filter | 1 |
170-2396 Tank Gp-Hydraulic
| 11***85 | Screen; (Hydraulic Tank Supply) | 1 |
| 12***34 | Pad | 1 |
| 13***76 | Filter Element As-Oil; (Ultra High Efficiency)(Ultra High Efficiency) | 2 |
234-5600 Tank Gp-Hydraulic
| 17***18 | Valve Group-Hoist Control | 1 |
| 17***36 | Bracket As | 1 |
| 22***34 | Strip | 1 |
241-8328 Valve & Mtg Gp-Hoist Control
| 10***72 | Manifold | 1 |
| 12***34 | Valve Group-Solenoid | 1 |
| 24***28 | Valve & Mtg Group-Hoist Control | 1 |
144-6220 Valve & Mtg Gp-Hoist Control
| 14***20 | Valve & Mtg Group-Hoist Control | 1 |
| 17***36 | Bracket As | 1 |
| 21***62 | Valve Group-Hoist Control | 1 |
163-3318 Valve & Mtg Gp-Hydraulic Fan
| 14***28 | Washer-Spring | 2 |
| 14***50 | Coil As | 1 |
| 15***33 | Cartridge As | 1 |
194-2530 Valve & Mtg Gp-Hydraulic Fan
| 19***30 | Valve & Mtg Group-Hydraulic Fan | 1 |
| 23***24 | Bracket As | 1 |
| 24***78 | Valve Group-Main Control | 1 |
234-5601 Valve & Mtg Gp-Main Control
| 23***01 | Valve & Mtg Group-Main Control | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
194-1723 Valve Gp-Check -Main Control Valve
| 19***23 | Valve Group-Check; -Main Control Valve | 1 |
| 2U***57 | Bolt; (1-1/16-12-Thd) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
128-2780 Valve Gp-Check -Main Control Valve
| 12***80 | Valve Group-Check; -Secondary Steering | 1 |
| 16***54 | Seal-O-Ring | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
165-7948 Valve Gp-Check -Pilot Lines
| 16***49 | Seal-O-Ring; (12.42mm Id) | 1 |
| 16***48 | Valve Group-Check; -Pilot Lines | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
112-9764 Valve Gp-Check -Hoist Lines
| 11***64 | Valve Group-Check; -Hoist Lines | 1 |
| 16***54 | Seal-O-Ring | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
158-9956 Valve Gp-Check -Main Control Valve
| 15***56 | Valve Group-Check; -Pilot, Differential Lock Oil | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 4J***77 | Seal - O - Ring (11.23mm Od) | 1 |
127-8175 Valve Gp-Check
| 12***75 | Valve Group-Check; -Flushing | 1 |
| 12***79 | Kit-Seal; (Check Valve)(Hydraulic Fan, Reversing) | 2 |
133-8810 Valve Gp-Counterbalance -Tailgate
| 03***05 | Seal-O-Ring | 1 |
| 13***10 | Valve Group-Counterbalance; -Tailgate | 1 |
| 23***36 | Seal Kit; (Includes Seals And Rings) | 1 |
239-0605 Valve Gp-Diverter -Brake, Fan, Hoist
| 13***09 | Manifold | 1 |
| 14***02 | Actuator Group-Pilot Control; -Hoist Lower | 1 |
| 14***03 | Actuator Group-Pilot Control; -Hoist Raise | 1 |
239-0603 Valve Gp-Diverter -Brake, Fan, Hoist
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
| 16***16 | Ring-Backup | 2 |
| 16***17 | Ring-Backup | 2 |
241-4680 Valve Gp-Hoist Control
| 24***80 | Valve Group-Hoist Control | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
174-0018 Valve Gp-Hoist Control
| 13***09 | Manifold | 1 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 2 |
| 17***18 | Valve Group-Hoist Control | 1 |
214-0662 Valve Gp-Hoist Control
| 01***41 | Setscrew-Socket | 1 |
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
| 10***10 | Valve-Check; (Steering) | 1 |
204-2124 Valve Gp-Lowering Control -Hoist
| 09***13 | Seal-O-Ring | 1 |
| 10***21 | Plug-Orifice | 1 |
| 12***27 | Plug-Orifice | 1 |
240-0678 Valve Gp-Main Control
| 09***13 | Seal-O-Ring | 1 |
| 10***21 | Plug-Orifice | 1 |
| 12***80 | Valve Group-Check; -Secondary Steering | 3 |
239-0615 Valve Gp-Pressure Reducing -Main Control
| 03***43 | Seal-O-Ring | 1 |
| 10***45 | Valve-Orifice; (Hydraulic Oil Check) | 1 |
| 19***36 | Spring | 1 |
184-5174 Valve Gp-Pump Control -Pressure, Flow Compensator-Steering
| 03***43 | Seal-O-Ring | 1 |
| 10***45 | Valve-Orifice; (Hydraulic Oil Check) | 1 |
| 18***74 | Valve Group-Pump Control; -Pressure, Flow Compensator-Steering Piston Pump | 1 |
135-6616 Valve Gp-Pump Control -Pressure, Flow Compensator-Brake, Fan, Hoist, Steering
| 03***43 | Seal-O-Ring | 1 |
| 10***45 | Valve-Orifice; (Hydraulic Oil Check) | 1 |
| 13***16 | Valve Group-Pump Control; -Pressure, Flow Compensator-Fan, Impl Pilot, Axle Cooler | 1 |
193-3182 Valve Gp-Pump Control -Pressure, Flow Compensator-Brake
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
| 16***16 | Ring-Backup | 2 |
| 19***82 | Valve Group-Pump Control; -Pressure, Flow Compensator-Steering Piston Pump | 1 |
241-6256 Valve Gp-Relief -Hoist Control
| 24***56 | Valve Group-Relief; -Hoist Control | 1 |
| 7T***42 | Kit-Hardware; (Solenoid Valve) | 1 |
191-7785 Valve Gp-Solenoid -Fan Drive
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***33 | Coil As; (24-Volt) | 1 |
| 15***70 | Nut; (1/2-20-2b-Thd) | 2 |
201-0950 Valve Gp-Solenoid
| 03***43 | Seal-O-Ring | 1 |
| 14***28 | Washer-Spring | 1 |
| 20***50 | Valve Group-Solenoid; -Parking Brake | 1 |
235-4605 Valve Gp-Solenoid
| 11***10 | Protector-Gas Valve | 1 |
| 15***36 | Valve-Gas; (Brake) | 1 |
| 17***94 | Kit-Seal; (Ride Control Accumulator) | 1 |
122-1134 Valve Gp-Solenoid
| 12***34 | Valve Group-Solenoid | 1 |
| 19***47 | Washer; (19.15x31.65x2.36-mm Thk) | 1 |
| 19***14 | Nut; (3/4-32-2b-Thd) | 1 |
Lubrication System
166-1329 Base Gp-Oil Filter -Engine
| 11***45 | Valve-Pump Bypass; (Engine Oil Filter) | 1 |
| 16***28 | Base Assem. | 1 |
| 16***29 | Base Group-Oil Filter; -Engine | 1 |
117-2786 Cover Gp-Oil Filter Base -Engine
| 11***86 | Cover Group-Oil Filter Base; -Engine | 1 |
| 5S***34 | Seal-O-Ring; (97.79mm Id) | 1 |
| 7C***42 | Cover; (Filter Base) | 1 |
110-5113 Filler Gp-Engine Oil
| 06***55 | Seal-O-Ring (Id=47.22mm) | 3 |
| 11***13 | Filler Group-Engine Oil | 1 |
| 24***45 | Cap As-Engine Oil Filler; (Engine Oil) | 1 |
144-6648 Filter Gp-Engine Oil
| 03***35 | Connector-Flared | 1 |
| 10***28 | Cover | 1 |
| 10***29 | Name-Plate (Lubrication), Adapter | 1 |
185-8764 Filter Gp-Engine Oil
| 03***35 | Connector-Flared | 1 |
| 10***28 | Cover | 1 |
| 10***29 | Name-Plate (Lubrication), Adapter | 1 |
249-6702 Fumes Disposal Gp
| 12***46 | Hose-Fumes Disposal | 1 |
| 24***02 | Fumes Disposal Group | 1 |
| 2S***53 | Clip; (34.92mm Id) | 1 |
183-9328 Gauge Gp-Oil Level (Dipstick) -Engine
| 13***30 | Gauge As-Oil Level; (Dipstick)(Engine) | 1 |
| 18***28 | Gauge Group-Oil Level (Dipstick); -Engine | 1 |
| 18***29 | Tube As | 1 |
185-7826 Lines Gp-Engine Oil Filter
| 18***50 | Bracket As | 1 |
| 18***21 | Hose As | 1 |
| 18***26 | Lines Group-Engine Oil Filter | 1 |
165-0592 Lines Gp-Turbocharger Oil
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 11***87 | Seal-O-Ring (23.16 mm Id) | 1 |
| 11***42 | Adapter | 1 |
241-0949 Lines Gp-Turbocharger Oil
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 11***87 | Seal-O-Ring (23.16 mm Id) | 1 |
| 11***42 | Adapter | 1 |
117-2746 Pump Gp-Engine Oil
| 06***61 | Seal-O-Ring (Id=40.87mm) | 1 |
| 11***03 | Tube Assem. | 1 |
| 11***46 | Pump Group-Engine Oil | 1 |
233-5220 Pump Gp-Engine Oil
| 23***20 | Pump Group-Engine Oil | 1 |
| 6D***46 | Seal-O-Ring (Id=101.27mm) | 1 |
| 6V***17 | Bolt; (M8x1.25x30-mm)(Location Z) | 4 |
Machine Arrangement
199-4112 Chassis Ar
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
199-4116 Chassis Ar-Rear
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
150-8300 General Ar
| 15***40 | Axle & Frame Ar; -Front | 1 |
| 15***46 | Installation Ar-Machine | 1 |
| 15***63 | Hydraulic Ar-Machine | 1 |
208-4703 Installation Ar-Machine
| 15***03 | Cylinder & Mtg Group-Hoist | 1 |
| 15***28 | Electronics Group-Power Train; -Transmission | 1 |
| 16***38 | Tire & Rim Ar | 1 |
150-8293 Installation Ar-Machine -Truck Body
| 15***93 | Installation Ar-Machine; -Truck Body | 1 |
| 15***94 | Body Group-Truck | 1 |
| 17***75 | Guard Group-Mud | 1 |
150-8298 Installation Ar-Machine
| 13***36 | Filter Element As-Oil; (Ultra High Efficiency)(Transmission) | 1 |
| 13***37 | Filter Element As-Oil; (Ultra High Efficiency)(Transmission) | 1 |
| 14***50 | Mirror Group-Rear View | 1 |
150-8246 Installation Ar-Machine
| 14***79 | Shaft Group-Main Drive | 1 |
| 14***82 | Lines Group-Parking Brake | 1 |
| 14***83 | Lines Group-Service Brake; -Front | 1 |
150-8285 Installation Ar-Machine
| 14***42 | Lines Group-Hoist | 1 |
| 15***85 | Installation Ar-Machine | 1 |
| 15***03 | Cylinder & Mtg Group-Hoist | 1 |
Operator Station
173-1029 Adjuster Gp-Seat
| 17***29 | Adjuster Group-Seat | 1 |
| 17***58 | Mount | 1 |
| 18***07 | Screw-Drive; (No 8x1.25-In) | 3 |
214-0783 Air Compressor Gp-Seat -Heavy-Duty
| 21***83 | Air Compressor Group-Seat; -Heavy-Duty | 1 |
237-3970 Air Compressor Gp-Seat
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 2 |
| 10***04 | Washer; (7.2x25x2-mm Thk) | 4 |
| 11***19 | Screw-Flat Head; (No 6x1-In) | 2 |
246-0845 Air Conditioner & Mounting Gp
| 03***91 | Pop - Rivet (To Secure Safety Lable) | 12 |
| 03***38 | Clamp | 3 |
| 10***40 | Cover | 1 |
149-0091 Air Conditioner & Mounting Gp
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 2 |
| 10***04 | Washer; (7.2x25x2-mm Thk) | 4 |
| 11***19 | Screw-Flat Head; (No 6x1-In) | 2 |
271-9204 Air Conditioner Gp
| 27***04 | Air Conditioner Group | 1 |
| 3E***12 | Nut-Square; (3/8-16-Thd) | 1 |
| 6V***87 | Screw-Pan Head; (10-24x1-In) | 4 |
157-2878 Air Conditioner Gp
| 03***91 | Pop - Rivet (To Secure Safety Lable) | 2 |
| 03***38 | Clamp | 3 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
246-0846 Air Conditioner Gp
| 06***71 | Terminal-Blade | 4 |
| 09***34 | Bolt; (Wing) (M6x1.0x15mm) | 1 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
8y-5904 Armrest Gp
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 1 |
| 16***49 | Bracket Assem.; (Lh) | 1 |
| 1K***72 | Locknut Horn To Guard | 1 |
292-1302 Armrest Gp -Rh
| 13***29 | Rops Group | 1 |
| 14***61 | Control Group-Service Brake | 1 |
| 14***62 | Control & Mtg Group-Power Train; -Transmission, Chassis | 1 |
162-8448 Armrest Gp -Rh
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 1 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 1 |
| 16***48 | Armrest Group; -Rh | 1 |
162-8447 Armrest Gp -Lh
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 1 |
| 16***47 | Armrest Group; -Lh | 1 |
| 16***48 | Bracket Assem.; (Rh) | 1 |
292-1301 Armrest Gp -Lh
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 1 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 1 |
| 16***48 | Bracket Assem.; (Rh) | 1 |
139-4594 Cab Ar
| 13***94 | Cab Ar | 1 |
| 13***29 | Rops Group | 1 |
| 14***65 | Control Group-Steering | 1 |
229-8086 Cab Ar
| 22***86 | Cab Ar | 1 |
| 24***72 | Screw-Machine; (8-16x7.75-In) | 4 |
| 27***91 | Valve Group-Water; -Heater | 1 |
275-6690 Coil Gp-Heater
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 27***90 | Coil Group-Heater | 1 |
| 31***18 | Valve As-Pressure Relief; (Refrigerant Compressor) | 1 |
171-4668 Compressor Gp-Refrigerant
| 17***68 | Compressor Group-Refrigerant | 1 |
| 19***74 | Bracket | 1 |
| 19***75 | Bracket | 1 |
163-0872 Compressor Gp-Refrigerant
| 16***72 | Compressor Group-Refrigerant; -Air Conditioner | 2 |
| 16***51 | Bracket | 1 |
| 6V***96 | Bolt; (M12x1.75x80-mm) | 2 |
149-0152 Condenser & Mtg Gp-Refrigerant
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 14***52 | Condenser & Mtg Group-Refrigerant | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
103-5526 Control Gp-Monitor -Backlight Dimmer
| 10***26 | Control Group-Monitor Sys Dimmer; -Backlight Dimmer | 1 |
| 25***03 | Control Group-Unprogrammed; (Caterpillar Monitoring System)(Caterpillar Monitoring System) | 1 |
149-5822 Control Gp-Tmsn & Hoist
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 14***74 | Handle Group-Modular; (Hoist) | 1 |
| 14***75 | Handle Group-Modular; (Transmission) | 1 |
160-6567 Control Gp-Unprgmed Monitor -Caterpillar Monitoring System
| 12***12 | Screw-Pan Head; (8-16x0.32-In) | 1 |
| 16***67 | Control Group-Unprgmed Monitor; -Caterpillar Monitoring System | 1 |
| 23***24 | Control Group-Monitor; (Messenger) | 1 |
239-5025 Control Gp-Unprgmed Monitor -Messenger
| 23***74 | Control Group-Xmsn & Hoist; (Electronic) | 1 |
| 23***25 | Control Group-Unprgmed Monitor; -Messenger | 1 |
| 8C***85 | Screw-Button Head; (M10x1.5x20-mm) | 4 |
232-3774 Control Gp-Xmsn & Hoist -Electronic
| 23***74 | Control Group-Xmsn & Hoist; (Electronic) | 1 |
| 26***42 | Baffle | 1 |
| 26***43 | Seal | 1 |
262-4741 Cover Gp-Air Conditioner
| 03***74 | Pin | 1 |
| 10***55 | Adaptor | 1 |
| 19***18 | Lock Pin | 1 |
183-3513 Cylinder Gp-Cab Tilt
| 11***58 | Washer; (6.5x17x1-mm Thk) | 2 |
| 12***73 | Handle As-Pull | 1 |
| 13***34 | Seal; (111-cm Each) | 0 |
149-0082 Door Gp-Cab
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***82 | Door Group-Cab | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
192-4315 Gauge Gp-Fuel Level -Tank
| 17***55 | Guard As-Window | 1 |
| 18***93 | Support As; (Lh) | 1 |
| 18***95 | Support As; (Rh) | 1 |
149-0104 Guard Gp-Window
| 14***04 | Guard Group-Window | 1 |
| 17***55 | Guard As-Window | 1 |
| 18***93 | Support As; (Lh) | 1 |
149-5824 Installation Gp-Radio
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 10***74 | Seal-Connector | 3 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
274-8879 Kit-Flow Control Valve -Air Conditioner, Heater
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 2 |
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 8 |
| 11***58 | Washer; (6.5x17x1-mm Thk) | 66 |
155-7474 Liner Gp-Cab -Sound Suppression
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 2 |
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 8 |
| 11***58 | Washer; (6.5x17x1-mm Thk) | 66 |
149-0085 Liner Gp-Cab
| 14***85 | Liner Group-Cab | 1 |
| 16***21 | Trim | 1 |
| 16***92 | Insulation | 1 |
241-8105 Liner Gp-Cab
| 10***00 | Fitting As-Air Conditioner; (Quick Disconnect)(Refrigerant) | 1 |
| 11***02 | Boot | 1 |
| 18***97 | Hose As | 1 |
149-0135 Lines Gp-Air Conditioner
| 10***00 | Fitting As-Air Conditioner; (Quick Disconnect)(Refrigerant) | 1 |
| 11***02 | Boot | 1 |
| 14***35 | Lines Group-Air Conditioner | 1 |
184-6138 Lines Gp-Air Conditioner -Accumulator, Dryer
| 00***89 | Valve As-Drain | 1 |
| 18***38 | Lines Group-Air Conditioner; -Accumulator, Dryer | 1 |
| 1L***79 | Elbow-Pipe; (3/8 In Pipe) | 1 |
149-0089 Lines Gp-Heater
| 10***38 | Spacer; (13.3x17.3x17.4-mm Thk) | 4 |
| 14***89 | Lines Group-Heater | 1 |
| 19***44 | Mirror Group-Rear View | 1 |
149-0150 Mirror Gp-Rear View
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 4 |
| 11***17 | Mirror; (Two Point Mount) | 2 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
175-2560 Mirror Gp-Rear View -Heated
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 5 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
199-7644 Mirror Gp-Rear View
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
| 19***44 | Mirror Group-Rear View | 1 |
166-6938 Module Gp-Quad Gauge
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 16***38 | Module Group-Quad Gauge | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
125-6806 Module Gp-Speedometer & Tach
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***06 | Module Group-Speedometer & Tach | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 5 |
147-7985 Motor Gp-Window Wiper -Front
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 14***85 | Motor Group-Window Wiper; -Front | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 5 |
168-8926 Motor Gp-Window Wiper -Rear
| 10***96 | Pin-Keeper | 8 |
| 14***14 | Mount | 4 |
| 14***15 | Spacer | 8 |
139-4593 Mounting Gp-Rops
| 10***96 | Pin-Keeper | 4 |
| 13***93 | Mounting Group-Rops | 1 |
| 14***14 | Mount | 4 |
251-7684 Pan Gp-Backrest -Cloth
| 13***43 | Plate As-Lumbar | 1 |
| 17***52 | Retainer | 1 |
| 17***07 | Holder | 1 |
186-3059 Pan Gp-Backrest -Cloth
| 13***43 | Plate As-Lumbar | 1 |
| 16***83 | Knob-Lumbar | 1 |
| 17***52 | Retainer | 1 |
292-6402 Pan Gp-Backrest -Lumbar
| 16***83 | Knob-Lumbar | 1 |
| 25***28 | Plug | 3 |
| 29***00 | Cushion As | 1 |
178-0605 Pan Gp-Backrest -Lumbar
| 11***04 | Cushion As-Back | 1 |
| 13***43 | Plate As-Lumbar | 1 |
| 16***83 | Knob-Lumbar | 1 |
292-9240 Pan Gp-Backrest -Cloth
| 15***01 | Pan-Drain | 1 |
| 24***72 | Gasket | 1 |
| 24***02 | Rivet | 4 |
218-0864 Pan Gp-Backrest -Cloth
| 16***83 | Knob-Lumbar | 1 |
| 17***05 | Pan Group-Backrest; -Lumbar | 1 |
| 21***48 | Cushion As | 1 |
275-6658 Pan Gp-Drain -Air Conditioner
| 22***18 | Cover | 1 |
| 27***58 | Panel As-Cab | 1 |
| 27***58 | Pan Group-Drain; -Air Conditioner | 1 |
229-5263 Panel Gp-Cab
| 06***71 | Terminal-Blade | 5 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
149-0079 Panel Gp-Instrument
| 06***71 | Terminal-Blade | 5 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
233-0334 Panel Gp-Instrument
| 11***28 | Screw; (10-32x1.25-In) | 2 |
| 16***43 | Sensor Group-Position; -Brake Pedal | 1 |
| 23***34 | Panel Group-Instrument | 1 |
168-9092 Pedal Gp-Governor
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 1 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 1 |
| 16***46 | Spring | 1 |
177-4935 Recliner Gp-Seat
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 1 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 1 |
| 17***90 | Spring | 1 |
210-2270 Recliner Gp-Seat
| 12***27 | Seal; (95-cm Each) | 0 |
| 14***28 | Plug | 5 |
| 16***71 | Panel | 1 |
139-4729 Rops Gp
| 13***29 | Rops Group | 1 |
| 16***79 | Seat Group-Suspension | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
149-0092 Seat & Mounting Gp
| 14***92 | Seat & Mounting Group | 1 |
| 20***73 | Seat Group-Suspension; -Cloth | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
231-9810 Seat & Mounting Gp
| 0T***44 | Bolt (1.25" Long) | 1 |
| 0T***89 | Cap Screw (2" Long) | 1 |
| 23***10 | Seat & Mounting Group | 1 |
222-0345 Seat Belt Gp -Retractable
| 11***89 | Extension Group-Backrest | 1 |
| 16***47 | Armrest Group; -Lh | 1 |
| 16***48 | Armrest Group; -Rh | 1 |
156-1145 Seat Belt Gp -Retractable
| 0T***44 | Bolt (1.25" Long) | 1 |
| 15***45 | Seat Belt Group; -Retractable | 1 |
| 20***88 | Bolt; (7/16-20) (44.5mml) | 1 |
187-4295 Seat Gp -Cloth
| 09***43 | Pin-Cotter | 2 |
| 11***06 | Cushion As | 1 |
| 13***99 | Pan Assem. | 1 |
218-8514 Seat Gp -Gray Cloth
| 09***43 | Pin-Cotter | 2 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 8 |
| 17***30 | Screw-Button Head; (3/8-16x1-In) | 6 |
187-4296 Seat Gp -Cloth
| 09***43 | Pin-Cotter | 2 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 8 |
| 17***30 | Screw-Button Head; (3/8-16x1-In) | 6 |
149-0088 Seat Gp-Companion
| 0T***44 | Bolt (1.25" Long) | 2 |
| 0T***89 | Cap Screw (2" Long) | 1 |
| 14***88 | Seat Group-Companion | 1 |
231-9809 Seat Gp-Companion
| 23***76 | Seat As | 1 |
| 23***09 | Seat Group-Companion | 1 |
| 24***96 | Cover-Back | 1 |
230-3393 Seat Gp-Suspension
| 0T***44 | Bolt (1.25" Long) | 1 |
| 0T***89 | Cap Screw (2" Long) | 1 |
| 14***94 | Seat As; (Cloth) | 1 |
200-3173 Seat Gp-Suspension -Cloth
| 20***73 | Seat Group-Suspension; -Cloth | 1 |
| 22***45 | Seat Belt Group; -Retractable | 1 |
| 23***11 | Suspension Group-Seat | 1 |
169-3279 Seat Gp-Suspension
| 16***79 | Seat Group-Suspension | 1 |
| 17***87 | Setscrew; (1/4-20-Thd) | 4 |
| 17***35 | Block Kit; (Includes Bolt, Washers, Blocks And Setscrews) | 1 |
246-6445 Seat Gp-Suspension -Cloth
| 24***45 | Seat Group-Suspension; -Cloth | 1 |
| 26***41 | Cover Group-Air Conditioner | 1 |
| 27***05 | Shield Group-Heat; -Exhaust Pipe | 1 |
276-8705 Shield Gp-Heat -Exhaust Pipe
| 10***17 | Bumper | 4 |
| 12***57 | Shaft | 2 |
| 12***28 | Kit-Roller; (Incls Parts Marked S) | 1 |
276-8703 Shield Gp-Heat -Cab Air
| 18***19 | Screw-Hex Flange; (M5x2.24x14-mm) | 23 |
| 27***03 | Shield Group-Heat; -Cab Air | 1 |
| 27***06 | Plate | 6 |
231-9811 Suspension Gp-Seat
| 12***29 | Elbow. Includes:- | 1 |
| 18***13 | Cylinder Group-Cab Tilt | 1 |
| 18***14 | Pump Group-Cab Tilt | 1 |
199-5725 Suspension Gp-Seat -Air
| 14***21 | Kit-Clip; (Seat) | 1 |
| 19***25 | Suspension Group-Seat; -Air | 1 |
| 24***68 | Cover As | 1 |
169-7034 Suspension Gp-Seat
| 10***03 | Fastener | 26 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***11 | Screw-Machine; (3/8-16x0.75-In) | 1 |
249-4615 Tilt Gp-Platform
| 13***93 | Bushing | 1 |
| 15***15 | Screw-Pan Head; (10-16x0.5-In) | 3 |
| 24***96 | Actuator | 1 |
149-0044 Tilt Gp-Platform
| 12***29 | Elbow. Includes:- | 1 |
| 14***44 | Tilt Group-Platform | 1 |
| 18***13 | Cylinder Group-Cab Tilt | 1 |
275-6691 Valve Gp-Water -Heater
| 16***72 | Visor As | 1 |
| 27***91 | Valve Group-Water; -Heater | 1 |
| 9X***44 | Screw-Truss Head (M6x1x16mm); (M6x1x16-mm) | 6 |
149-0087 Visor Gp-Cab
| 11***24 | Button | 5 |
| 14***87 | Visor Group-Cab | 1 |
| 15***88 | Window | 1 |
168-6450 Window Gp -Ventilation, Lh
| 12***21 | Tank As-Window Washer | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
| 14***85 | Motor Group-Window Wiper; -Front | 1 |
168-6449 Window Gp -Rh Sliding
| 16***49 | Window Group; -Rh Sliding | 1 |
| 20***07 | Glass | 1 |
| 20***08 | Seal | 1 |
149-0090 Window Gp
| 09***55 | Screw-Machine; (M4x0.07x12-mm) | 2 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 13***87 | Screw; (M4x0.7x12-mm) | 2 |
237-7311 Wiper & Washer Gp-Window
| 15***16 | Cover-Shipping | 1 |
| 16***88 | Gasket | 1 |
| 1H***96 | Packing,Preformed Cartridge Part Of Kit P/N 4j***80 | 1 |
149-0097 Wiper & Washer Gp-Window -Rear
| 13***34 | Blade As-Wiper; (500-mm)(Rear) | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
| 14***01 | Grommet | 2 |
149-0096 Wiper & Washer Gp-Window -Front
| 01***16 | Setscrew; (8-32x0.5-In) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***85 | Knob-Wiper Switch; (Rear) | 1 |
Power Train
150-8240 Axle & Frame Ar -Front
| 13***61 | Hitch Group-Oscillating | 1 |
| 14***09 | Shaft Group-Hitch Drive | 1 |
| 14***10 | Shaft Group-Rear Drive | 1 |
150-8274 Axle & Frame Ar -Rear
| 13***61 | Hitch Group-Oscillating | 1 |
| 14***09 | Shaft Group-Hitch Drive | 1 |
| 14***28 | Wiring Group-Lighting; -Rear | 1 |
207-0842 Axle & Frame Ar -Rear
| 13***61 | Hitch Group-Oscillating | 1 |
| 14***09 | Shaft Group-Hitch Drive | 1 |
| 14***28 | Wiring Group-Lighting; -Rear | 1 |
208-4702 Axle & Frame Ar -Rear
| 13***87 | Breather Group-Power Train; -Axle, Center | 1 |
| 13***64 | Frame Group-Center Suspension | 1 |
| 14***00 | Axle Group-Center | 1 |
150-8276 Axle Ar-Center -Suspension
| 14***00 | Axle Group-Front | 1 |
| 14***68 | Breather Group-Power Train; -Axle, Front | 1 |
| 15***76 | Axle Ar-Center; -Suspension | 1 |
150-8243 Axle Ar-Front -Suspension
| 13***03 | Frame Group-Rear Suspension | 1 |
| 13***88 | Breather Group-Power Train; -Axle, Rear | 1 |
| 14***00 | Axle Group-Rear | 1 |
150-8280 Axle Ar-Rear -Suspension
| 10***95 | Plate; (T/M Identification) | 1 |
| 13***20 | Guard | 1 |
| 13***81 | Guard Group-Lines; -Axle, Center, Rear | 1 |
147-6800 Axle Gp-Center
| 13***20 | Guard | 1 |
| 13***81 | Guard Group-Lines; -Axle, Center, Rear | 1 |
| 13***98 | Shaft | 1 |
147-7400 Axle Gp-Front
| 12***42 | Cover-Dust | 2 |
| 13***81 | Guard Group-Lines; -Axle, Center, Rear | 1 |
| 13***92 | Shaft | 1 |
147-7700 Axle Gp-Rear
| 12***42 | Cover-Dust | 2 |
| 13***81 | Guard Group-Lines; -Axle, Center, Rear | 1 |
| 13***92 | Shaft | 1 |
148-9968 Breather Gp-Power Train -Axle, Front
| 14***68 | Breather Group-Power Train; -Axle, Front | 1 |
| 20***66 | Tube As | 1 |
| 2T***05 | Elbow | 1 |
137-5687 Breather Gp-Power Train -Axle, Center
| 09***14 | Hose As | 1 |
| 13***87 | Breather Group-Power Train; -Axle, Center | 1 |
| 15***29 | Adapter | 1 |
199-5975 Breather Gp-Power Train
| 13***77 | Bushing | 4 |
| 15***40 | Dowel | 2 |
| 19***75 | Breather Group-Power Train | 1 |
137-5688 Breather Gp-Power Train -Axle, Rear
| 13***88 | Breather Group-Power Train; -Axle, Rear | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
| 15***29 | Adapter | 1 |
188-1002 Carrier Gp-Differential -Axle, Center
| 14***59 | Plug | 1 |
| 18***02 | Carrier Group-Differential; -Axle, Center | 1 |
| 19***00 | Case As | 1 |
143-8691 Carrier Gp-Differential -Axle, Front, Rear
| 13***77 | Bushing | 4 |
| 14***91 | Carrier Group-Differential; -Axle, Front, Rear | 1 |
| 15***40 | Dowel | 2 |
148-9304 Case Gp-Transfer
| 14***48 | Bolt; (M10x1.5x65-mm)(M10x1.50x65mm) | 22 |
| 14***04 | Case Group-Transfer | 1 |
| 19***56 | Case As | 1 |
196-1255 Case Gp-Transfer
| 14***18 | Connector As | 2 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
| 14***71 | Elbow, 45, -6 Orfs Fm Swivel | 1 |
196-9238 Control Gp-Differential Lock
| 09***35 | Bolt-Socket Head; (M10x1.5x16-mm) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
140-7508 Control Gp-Transmission Hyd
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 11***85 | Seal-O-Ring; (13.94mm Id) | 2 |
| 12***01 | Clip | 1 |
245-1157 Control Gp-Transmission Hyd
| 06***40 | Seal-O-Ring (Id=37.69mm) | 2 |
| 10***25 | Gasket | 1 |
| 10***01 | Gasket | 2 |
227-4559 Control Gp-Transmission Hyd
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
| 11***85 | Seal-O-Ring; (13.94mm Id) | 2 |
| 12***01 | Clip | 1 |
197-0813 Cooler Gp-Transmission Oil
| 0S***03 | Bolt,Machine Fuel Pump Drive Gear Mounting | 30 |
| 12***03 | Seal-Lip Type; (7602mm Id) | 1 |
| 12***60 | Screw-Flat Head; (M6x1x16-mm) | 8 |
162-2232 Cooler Gp-Transmission Oil
| 16***32 | Cooler Group-Transmission Oil | 1 |
| 19***46 | Flange | 2 |
| 19***92 | Bonnet As | 1 |
147-7380 Differential & Bevel Gear Gp -Axle, Front, Rear
| 0S***03 | Bolt,Machine Fuel Pump Drive Gear Mounting | 30 |
| 12***60 | Screw-Flat Head; (M6x1x16-mm) | 8 |
| 13***24 | Disc-Friction | 7 |
282-6924 Differential & Bevel Gear Gp -Axle, Center
| 13***11 | Pinion | 4 |
| 13***12 | Washer | 4 |
| 13***16 | Washer-Thrust | 2 |
188-1408 Differential & Bevel Gear Gp -Axle, Center
| 12***03 | Seal-Lip Type; (7602mm Id) | 1 |
| 12***60 | Screw-Flat Head; (M6x1x16-mm) | 8 |
| 13***24 | Disc-Friction | 7 |
282-6918 Differential & Bevel Gear Gp
| 12***60 | Screw-Flat Head; (M6x1x16-mm) | 8 |
| 13***24 | Disc-Friction | 7 |
| 13***86 | Cage-Bearing | 1 |
193-4303 Differential Gp -Drive Axle
| 10***32 | Bearing As-Roller | 1 |
| 12***09 | Seal-O-Ring | 1 |
| 13***32 | Gear-Idler; (62-Teeth) | 1 |
139-1123 Drive Gp-Pump
| 10***32 | Bearing As-Roller | 1 |
| 12***09 | Seal-O-Ring | 1 |
| 13***32 | Gear-Idler; (62-Teeth) | 1 |
250-2293 Drive Gp-Pump
| 10***32 | Bearing As-Roller | 1 |
| 12***09 | Seal-O-Ring | 1 |
| 13***32 | Gear-Idler; (62-Teeth) | 1 |
148-9997 Filler Gp-Power Train Oil
| 14***22 | Hose As | 1 |
| 14***27 | Connector Group | 3 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
150-7559 Filter & Lines Gp-Power Train
| 14***22 | Hose As | 1 |
| 14***27 | Connector Group | 3 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
237-4739 Filter & Lines Gp-Power Train
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***91 | Filter-Oil; (Advanced Efficiency) | 1 |
| 18***64 | Valve As-Fluid Sampling; (Transmission) | 1 |
196-5540 Filter Gp-Oil -Diff Lock, Output Transfer Gear
| 08***91 | Bolt; (M10x1.5x55-mm) | 1 |
| 12***35 | Bearing As-Roller | 4 |
| 13***17 | Yoke | 1 |
139-4720 Gear Gp-Output Transfer
| 08***91 | Bolt; (M10x1.5x55-mm) | 3 |
| 12***35 | Bearing As-Roller | 4 |
| 13***17 | Yoke | 1 |
213-3925 Gear Gp-Output Transfer
| 08***91 | Bolt; (M10x1.5x55-mm) | 3 |
| 12***35 | Bearing As-Roller | 4 |
| 13***17 | Yoke | 1 |
139-9112 Housing Gp-Torque Converter
| 13***12 | Housing Group-Torque Converter | 1 |
| 14***68 | Elbow Group | 1 |
| 14***74 | Elbow As | 1 |
149-0130 Lines Gp-Differential Lock -Rear
| 11***31 | Stud-Taperlock | 1 |
| 14***05 | Adapter Group | 1 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 1 |
149-0012 Lines Gp-Differential Lock -Front
| 14***63 | Elbow Group | 1 |
| 14***74 | Elbow As | 1 |
| 14***77 | Elbow As. | 2 |
150-8258 Lines Gp-Power Train Cooler
| 14***02 | Plate Group-Drive | 1 |
| 15***58 | Lines Group-Power Train Cooler | 1 |
| 7X***08 | Bolt; (7/16-14x1.375-In) | 12 |
176-4120 Mounting Gp-Torque Converter -To Engine
| 17***49 | Bracket As-Mounting | 1 |
| 17***12 | Washer-Special; (22x125x10-mm Thk) | 1 |
| 17***75 | Bracket As; (Lh) | 1 |
148-9962 Mounting Gp-Transfer Gear
| 14***62 | Mounting Group-Transfer Gear | 1 |
| 17***12 | Washer-Special; (22x125x10-mm Thk) | 1 |
| 17***75 | Bracket As; (Lh) | 1 |
250-1725 Mounting Gp-Transfer Gear
| 11***77 | Disc-Thrust | 1 |
| 14***25 | Shaft | 1 |
| 14***26 | Housing As | 1 |
148-9350 Planetary Gp-Transfer Gear
| 03***22 | Plug-Magnetic-O-Ring | 1 |
| 12***99 | Bolt; (M16x2x250-mm) | 7 |
| 13***91 | Seal-Ring | 2 |
139-1122 Planetary Gp-Transmission
| 12***99 | Bolt; (M16x2x250-mm) | 7 |
| 13***91 | Seal-Ring | 2 |
| 13***05 | Ring-Retaining | 1 |
227-4551 Planetary Gp-Transmission
| 14***97 | Adapter | 1 |
| 14***99 | Plate-Coupling | 3 |
| 14***00 | Plate-Flex | 1 |
143-4702 Plate Gp-Drive
| 14***02 | Plate Group-Drive | 1 |
| 15***58 | Pump Group-Gear; -Differential Lock | 1 |
| 1H***27 | Seal 10.1 cm(3.984 In.) I.D. | 1 |
149-0147 Pump & Mtg Gp-Transfer Gear -Diff Lock, Transfer Gear Lube
| 13***34 | Gear-Pump Drive; (46-Teeth) | 1 |
| 14***43 | Pump Group-Transmission | 1 |
| 14***47 | Pump & Mtg Group-Transfer Gear; -Diff Lock, Transfer Gear Lube | 1 |
250-7651 Pump Gp-Gear -Transmission
| 14***62 | Ring-Seal | 1 |
| 14***64 | Cover As | 1 |
| 14***50 | Bearing | 3 |
191-6114 Pump Gp-Gear -Output Transfer Gear
| 13***34 | Gear-Pump Drive; (46-Teeth) | 1 |
| 19***14 | Pump Group-Gear; -Output Transfer Gear-Transfer Gear Lubrication | 1 |
| 25***64 | Pump Group-Transmission | 1 |
142-6244 Pump Gp-Gear -Transmission
| 14***44 | Pump Group-Gear; -Transmission | 1 |
| 15***59 | Cover As | 1 |
| 15***65 | Cover As | 1 |
151-7458 Pump Gp-Gear -Differential Lock
| 15***58 | Pump Group-Gear; -Differential Lock | 1 |
| 15***65 | Cover As | 1 |
| 15***69 | Adapter As | 1 |
142-6243 Pump Gp-Transmission
| 14***62 | Ring-Seal | 1 |
| 14***64 | Cover As | 1 |
| 14***50 | Bearing | 3 |
250-5864 Pump Gp-Transmission
| 14***55 | Rotor-Retarder | 1 |
| 14***57 | Stator As | 1 |
| 14***58 | Housing-Retarder | 1 |
140-6382 Retarder Gp
| 14***82 | Retarder Group | 1 |
| 20***73 | Flange As | 1 |
| 22***52 | Rim As | 1 |
225-2851 Rim Gp
| 16***09 | Rim As | 1 |
| 1J***87 | Flange | 2 |
| 22***51 | Rim Group | 1 |
163-5710 Rim Gp-Demountable
| 16***10 | Rim Group-Demountable | 1 |
| 16***97 | Rim As | 1 |
| 4F***25 | Flange | 2 |
224-8808 Rim Gp-Demountable
| 13***10 | Stud-Taperlock; (M10x1.5x45-mm) | 3 |
| 14***02 | Housing As | 1 |
| 14***10 | Cover | 1 |
166-6398 Rim Gp-Demountable
| 16***98 | Rim Group-Demountable | 1 |
| 20***72 | Flange Assem. | 1 |
| 22***09 | Rim As | 1 |
148-9311 Screen Gp-Magnetic
| 0S***04 | Bolt (1/2-20x2.5in); (1/2-20x2.5-In) | 8 |
| 14***11 | Screen Group-Magnetic | 1 |
| 17***71 | Spider & Bearing Group | 2 |
174-0080 Shaft Gp-Center Drive
| 0S***04 | Bolt (1/2-20x2.5in); (1/2-20x2.5-In) | 8 |
| 17***71 | Spider & Bearing Group | 2 |
| 17***80 | Shaft Group-Center Drive | 1 |
172-4454 Shaft Gp-Drive
| 0S***79 | Bolt 5.08 cm(2 In.) Long | 8 |
| 17***54 | Shaft Group-Drive | 1 |
| 20***35 | Shaft Group-Front Drive | 1 |
148-9964 Shaft Gp-Front Drive
| 0S***79 | Bolt 5.08 cm(2 In.) Long | 8 |
| 10***77 | Seal | 1 |
| 14***64 | Shaft Group-Front Drive | 1 |
200-7735 Shaft Gp-Front Drive
| 0S***84 | Cap Screw (2 1/4" Long) | 8 |
| 10***88 | Guard-Dirt | 1 |
| 14***81 | Retainer | 2 |
149-0109 Shaft Gp-Hitch Drive
| 0S***84 | Cap Screw (2 1/4" Long) | 8 |
| 14***09 | Shaft Group-Hitch Drive | 1 |
| 17***84 | Shaft Group-Main Drive | 1 |
174-0084 Shaft Gp-Main Drive
| 13***10 | Ball Bearing | 2 |
| 13***98 | Housing | 1 |
| 13***00 | Housing | 1 |
148-9979 Shaft Gp-Main Drive
| 0S***04 | Bolt (1/2-20x2.5in); (1/2-20x2.5-In) | 8 |
| 14***79 | Shaft Group-Main Drive | 1 |
| 17***71 | Spider & Bearing Group | 2 |
200-7736 Shaft Gp-Rear Drive
| 14***16 | Connector Group | 1 |
| 14***25 | Connector As. | 1 |
| 18***52 | Hose As | 1 |
131-8403 Shaft Gp-Rear Drive
| 0S***84 | Cap Screw (2 1/4" Long) | 8 |
| 0S***79 | Bolt 5.08 cm(2 In.) Long | 8 |
| 13***03 | Shaft Group-Rear Drive | 1 |
149-0110 Shaft Gp-Rear Drive
| 0S***84 | Cap Screw (2 1/4" Long) | 16 |
| 0S***79 | Bolt 5.08 cm(2 In.) Long | 8 |
| 12***22 | Spacer; (17x32x22.5-mm Thk) | 4 |
196-9230 Shaft Gp-Rear Drive
| 0S***79 | Bolt 5.08 cm(2 In.) Long | 8 |
| 10***77 | Seal | 1 |
| 19***30 | Shaft Group-Rear Drive | 1 |
155-0555 Tank Gp-Power Train Oil
| 11***69 | Hose As | 1 |
| 14***16 | Connector Group | 1 |
| 14***25 | Connector As. | 1 |
193-0918 Tank Gp-Power Train Oil -Transfer Gear
| 16***42 | Tire & Rim Group | 6 |
| 19***18 | Tank Group-Power Train Oil; -Transfer Gear | 1 |
263-6704 Tire & Rim Ar
| 12***25 | Tire; (23.5-R25) | 1 |
| 16***10 | Rim Group-Demountable | 1 |
| 22***08 | Rim Group-Demountable | 1 |
178-8873 Tire & Rim Ar
| 17***73 | Tire & Rim Ar | 1 |
| 18***71 | Tire & Rim Group | 6 |
252-6298 Tire & Rim Ar
| 16***24 | Tire & Rim Group | 6 |
| 24***42 | Extension Group-Fender | 1 |
| 25***98 | Tire & Rim Ar | 1 |
259-5505 Tire & Rim Ar
| 25***05 | Tire & Rim Ar | 1 |
| 26***20 | Tire & Rim Group | 6 |
252-6297 Tire & Rim Ar
| 16***22 | Tire & Rim Group | 6 |
| 24***42 | Extension Group-Fender | 1 |
| 25***97 | Tire & Rim Ar | 1 |
164-2338 Tire & Rim Ar
| 16***38 | Tire & Rim Ar | 1 |
| 16***43 | Tire & Rim Group | 6 |
261-3638 Tire & Rim Ar
| 26***38 | Tire & Rim Ar | 1 |
| 26***41 | Tire & Rim Group | 6 |
184-4870 Tire & Rim Ar
| 18***70 | Tire & Rim Ar | 1 |
| 18***22 | Tire & Rim Group | 6 |
178-8863 Tire & Rim Ar
| 16***22 | Tire & Rim Group | 6 |
| 17***06 | Extension Group-Fender | 1 |
| 17***63 | Tire & Rim Ar | 1 |
164-2340 Tire & Rim Ar
| 16***40 | Tire & Rim Ar | 1 |
| 16***93 | Tire & Rim Group | 6 |
| 21***87 | Fender Group | 1 |
237-0214 Tire & Rim Ar
| 16***05 | Tire & Rim Group | 6 |
| 23***14 | Tire & Rim Ar | 1 |
| 24***42 | Extension Group-Fender | 1 |
164-2339 Tire & Rim Ar
| 16***39 | Tire & Rim Ar | 1 |
| 16***44 | Tire & Rim Group | 6 |
178-8860 Tire & Rim Ar
| 16***05 | Tire & Rim Group | 6 |
| 17***06 | Extension Group-Fender | 1 |
| 17***60 | Tire & Rim Ar | 1 |
178-8868 Tire & Rim Ar
| 16***24 | Tire & Rim Group | 6 |
| 17***06 | Extension Group-Fender | 1 |
| 17***68 | Tire & Rim Ar | 1 |
187-7221 Tire & Rim Ar
| 18***21 | Tire & Rim Ar | 1 |
| 19***42 | Tire & Rim Group | 6 |
252-6299 Tire & Rim Ar
| 25***99 | Tire & Rim Ar | 1 |
| 25***06 | Tire & Rim Group | 6 |
263-2600 Tire & Rim Ar
| 26***00 | Tire & Rim Ar | 1 |
| 26***05 | Tire & Rim Group | 6 |
263-0942 Tire & Rim Ar
| 26***42 | Tire & Rim Ar | 1 |
| 26***95 | Tire & Rim Group | 6 |
206-3948 Tire & Rim Ar
| 20***48 | Tire & Rim Ar | 1 |
| 23***13 | Tire & Rim Group | 6 |
199-3039 Tire & Rim Ar
| 17***06 | Extension Group-Fender | 1 |
| 19***39 | Tire & Rim Ar | 1 |
| 20***51 | Tire & Rim Group | 6 |
263-6705 Tire & Rim Gp
| 11***72 | Stator-Converter | 1 |
| 13***53 | Seal-O-Ring | 1 |
| 13***54 | Seal-O-Ring | 1 |
165-3822 Tire & Rim Gp
| 13***27 | Tire; (30/65-R25)(30/65 R25 ** E2/E3 & L2/L3) | 1 |
| 16***22 | Tire & Rim Group | 1 |
| 16***98 | Rim Group-Demountable | 1 |
187-7222 Tire & Rim Gp
| 18***22 | Tire & Rim Group | 1 |
| 19***68 | Tire; (23.5-R25) | 1 |
| 22***08 | Rim Group-Demountable | 1 |
199-3042 Tire & Rim Gp
| 19***42 | Tire & Rim Group | 1 |
| 22***08 | Rim Group-Demountable | 1 |
| 2D***43 | Seal-O-Ring | 1 |
261-1320 Tire & Rim Gp
| 22***08 | Rim Group-Demountable | 1 |
| 26***20 | Tire & Rim Group | 1 |
| 26***40 | Tire; (23.5-R25) | 1 |
164-2343 Tire & Rim Gp
| 11***11 | Tire; (23.5-R25) | 1 |
| 16***10 | Rim Group-Demountable | 1 |
| 16***43 | Tire & Rim Group | 1 |
184-4871 Tire & Rim Gp
| 15***66 | Tire; (23.5-R25) | 1 |
| 16***10 | Rim Group-Demountable | 1 |
| 18***71 | Tire & Rim Group | 1 |
164-2342 Tire & Rim Gp
| 11***12 | Tire; (23.5-R25) | 1 |
| 16***10 | Rim Group-Demountable | 1 |
| 16***42 | Tire & Rim Group | 1 |
166-3705 Tire & Rim Gp
| 15***96 | Tire; (660/65r25 186b E3t) | 1 |
| 16***05 | Tire & Rim Group | 1 |
| 16***98 | Rim Group-Demountable | 1 |
164-2344 Tire & Rim Gp
| 12***14 | Tire; (30/65-R25)(30/65 R25 ** Rl-2+ E-2) | 1 |
| 16***44 | Tire & Rim Group | 1 |
| 16***98 | Rim Group-Demountable | 1 |
259-5506 Tire & Rim Gp
| 22***08 | Rim Group-Demountable | 1 |
| 25***06 | Tire & Rim Group | 1 |
| 26***18 | Tire; (23.5-R25) | 1 |
206-3951 Tire & Rim Gp
| 20***51 | Tire & Rim Group | 1 |
| 22***08 | Rim Group-Demountable | 1 |
| 23***03 | Tire; (23.5-R25) | 1 |
263-2595 Tire & Rim Gp
| 22***08 | Rim Group-Demountable | 1 |
| 26***95 | Tire & Rim Group | 1 |
| 26***95 | Tire; (23.5-R25) | 1 |
165-3824 Tire & Rim Gp
| 16***18 | Tire; (750/65r25 190b Xad 65-1 E3t) | 1 |
| 16***24 | Tire & Rim Group | 1 |
| 16***98 | Rim Group-Demountable | 1 |
237-0213 Tire & Rim Gp
| 22***08 | Rim Group-Demountable | 1 |
| 23***13 | Tire & Rim Group | 1 |
| 25***83 | Tire; (23.5-R25) | 1 |
263-0941 Tire & Rim Gp
| 19***36 | Tire; (23.5-R25) | 1 |
| 22***08 | Rim Group-Demountable | 1 |
| 26***41 | Tire & Rim Group | 1 |
166-6393 Tire & Rim Gp
| 16***10 | Rim Group-Demountable | 1 |
| 16***93 | Tire & Rim Group | 1 |
| 22***08 | Rim Group-Demountable | 1 |
245-1735 Torque Converter Gp
| 13***70 | Torque Converter Group | 1 |
| 13***22 | Planetary Group-Transmission | 1 |
| 13***23 | Drive Group-Pump | 1 |
135-5570 Torque Converter Gp
| 13***53 | Seal-O-Ring | 1 |
| 13***54 | Seal-O-Ring | 1 |
| 13***57 | Impeller-Converter | 1 |
227-4550 Transmission Ar
| 13***70 | Torque Converter Group | 1 |
| 14***82 | Retarder Group | 1 |
| 14***02 | Plate Group-Drive | 1 |
139-1124 Transmission Ar
| 13***70 | Torque Converter Group | 1 |
| 13***23 | Drive Group-Pump | 1 |
| 13***24 | Transmission Ar | 1 |
245-1215 Transmission Ar
| 0S***79 | Bolt 5.08 cm(2 In.) Long | 8 |
| 10***77 | Seal | 1 |
| 24***15 | Transmission Ar | 1 |
174-0079 Universal Joint Gp
| 0S***04 | Bolt (1/2-20x2.5in); (1/2-20x2.5-In) | 8 |
| 17***71 | Spider & Bearing Group | 2 |
| 17***79 | Universal Joint Group | 1 |
174-4019 Universal Joint Gp
| 15***85 | Valve Group-Solenoid; -Hydraulic Oil Cooler Shutoff | 1 |
| 17***19 | Universal Joint Group | 1 |
| 7T***45 | Manifold-Solenoid Valve | 1 |
152-2698 Valve & Mtg Gp-Solenoid
| 13***00 | Clip; (Tab) | 1 |
| 13***99 | Spring | 1 |
| 13***95 | Body-Filter Bypass | 1 |
209-6632 Valve Gp-Bypass
| 14***44 | Coil Assem. | 1 |
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
| 16***24 | Nut-Self-Locking; (1/2-28-Thd) | 1 |
244-3114 Valve Gp-Modulating
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
| 24***14 | Valve Group-Modulating; -Transmission Hydraulic Control | 1 |
216-5338 Valve Gp-Modulating
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
| 21***38 | Valve Group-Modulating; -Torque Converter Lockup Clutch | 1 |
147-0867 Valve Gp-Reducing
| 11***50 | Cover | 1 |
| 14***67 | Valve Group-Reducing | 1 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 2 |
172-7970 Valve Gp-Relief -Transmission Hydraulic Control
| 14***67 | Valve Group-Reducing | 1 |
| 14***72 | Body-Retarder | 1 |
| 14***74 | Plate | 1 |
149-0978 Valve Gp-Retarder Hyd Control
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***43 | Locknut; (5/16-18-Thd) | 1 |
| 14***78 | Valve Group-Retarder Hydraulic Control | 1 |
200-8215 Valve Gp-Solenoid
| 12***14 | Kit-Seal | 1 |
| 14***88 | Kit-Seal; (Ride Control, Switch) | 1 |
| 14***61 | Valve Group-Diverter | 1 |
152-8385 Valve Gp-Solenoid
| 10***83 | Kit-Seal; (Solenoid Valve) | 1 |
| 11***43 | Locknut; (5/16-18-Thd) | 2 |
| 15***85 | Valve Group-Solenoid; -Hydraulic Oil Cooler Shutoff | 1 |
148-9368 Valve Gp-Solenoid & Relief -Output Transfer Gear
| 12***14 | Kit-Seal | 1 |
| 14***88 | Kit-Seal; (Ride Control, Switch) | 1 |
| 14***61 | Valve Group-Diverter | 1 |
201-5676 Valve Gp-Solenoid & Relief -Output Transfer Gear
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 6 |
| 13***17 | Wheel | 1 |
| 13***18 | Disc | 1 |
147-5225 Wheel & Final Drive Gp
| 13***17 | Yoke | 1 |
| 14***25 | Wheel & Final Drive Group | 1 |
| 1T***06 | Retainer | 1 |
250-5736 Yoke Gp
| 11***59 | Mount Assem. | 1 |
| 12***33 | Wiper | 1 |
| 12***63 | Plug As-Connector; (1-Pin) | 1 |
Service Equipment And Supplies
207-2648 Cover Gp-Shipping
| 03***91 | Pop - Rivet (To Secure Safety Lable) | 38 |
| 11***93 | Plate; (Instruction) (On Right Side Behind Cab Door) | 1 |
| 11***25 | Film-Identification; (Transmission Tank Fill Cap) | 2 |
166-7141 Cover Gp-Shipping
| 16***41 | Cover Group-Shipping | 1 |
| 4J***20 | Seal (For Tilt Ports On Valve) | 2 |
| 5H***19 | Cover (For Tilt Ports On Valve) | 2 |
150-8304 Plate & Film Gp -Greek
| 11***55 | Film-Air Cleaner (Later Amchines Only) | 1 |
| 12***47 | Plate-Warning; (High Pressure Lines)(High Pressure) | 2 |
| 12***67 | Plate-Warning; (Dump Body Prop) | 2 |
150-8302 Plate & Film Gp -Arabic
| 12***48 | Plate-Warning; (High Pressure Lines)(Suspension) | 2 |
| 12***68 | Plate-Warning; (Dump Body Prop) | 2 |
| 12***67 | Plate - Warning (Cab Pin) | 1 |
150-8310 Plate & Film Gp -French
| 11***58 | Film - Air Cleaner (Later Machines Only) | 1 |
| 12***45 | Plate-Warning; (High Pressure Lines)(Suspension) | 2 |
| 12***65 | Plate-Warning; (Dump Body Prop) | 2 |
194-8503 Plate & Film Gp -Japanese
| 19***03 | Plate & Film Group; -Japanese | 1 |
| 23***35 | Film-Information; (Air Cleaner) | 1 |
| 23***12 | Plate-Warning; (Read Omm) | 1 |
150-8303 Plate & Film Gp -Italian
| 12***46 | Plate-Warning; (High Pressure Lines)(Suspension) | 2 |
| 12***66 | Plate-Warning; (Dump Body Prop) | 2 |
| 12***65 | Plate - Warning (Cab Pin) | 1 |
150-8312 Plate & Film Gp -Norwegian
| 10***08 | Film-Warning; (Jump Start, Read Omm) | 2 |
| 10***29 | Plate-Warning; (Do Not Operate) | 1 |
| 13***65 | Film-Information; (Air Cleaner) | 1 |
150-8307 Plate & Film Gp
| 11***61 | Film - Air Cleaner (Later Machines Only) | 1 |
| 13***81 | Plate-Warning; (No Clearance) | 2 |
| 15***07 | Plate & Film Group | 1 |
150-8309 Plate & Film Gp -Swedish
| 12***35 | Plate-Warning; (Dump Body Prop) | 2 |
| 12***36 | Plate - Cab Pin Warning | 1 |
| 12***38 | Plate-Warning; (High Pressure Lines)(Suspension) | 1 |
150-8308 Plate & Film Gp -Spanish
| 12***35 | Plate-Warning; (Dump Body Prop) | 2 |
| 12***36 | Plate - Cab Pin Warning | 1 |
| 12***38 | Plate-Warning; (High Pressure Lines)(Suspension) | 2 |
150-8306 Plate & Film Gp -German
| 13***83 | Plate-Warning; (No Clearance) | 2 |
| 15***06 | Plate & Film Group; -German | 1 |
| 18***54 | Plate-Warning; (Accumulator) | 1 |
150-8305 Plate & Film Gp -Dutch
| 13***83 | Plate-Warning; (No Clearance) | 2 |
| 15***05 | Plate & Film Group; -Dutch | 1 |
| 18***54 | Plate-Warning; (Accumulator) | 1 |
259-0261 Plate & Film Gp -Slovakian
| 25***33 | Film-Warning; (Jump Start, Read Omm) | 2 |
| 25***40 | Film-Information; (Air Cleaner) | 1 |
| 25***61 | Plate & Film Group; -Slovakian | 1 |
150-8301 Plate & Film Gp
| 03***91 | Pop - Rivet (To Secure Safety Lable) | 34 |
| 11***93 | Plate; (Instruction) (On Right Side Behind Cab Door) | 1 |
| 11***25 | Film-Identification; (Transmission Tank Fill Cap) | 2 |
150-8311 Plate & Film Gp -Danish
| 11***58 | Film - Air Cleaner (Later Machines Only) | 1 |
| 12***45 | Plate-Warning; (High Pressure Lines)(Suspension) | 1 |
| 12***65 | Plate-Warning; (Dump Body Prop) | 2 |
194-8502 Plate & Film Gp -Finnish
| 11***56 | Film-Information; (Radial Seal) | 1 |
| 19***16 | Plate-Warning; (No Clearance) | 2 |
| 19***19 | Plate-Warning; (Cab Pin) | 1 |
253-6961 Plate & Film Gp
| 20***94 | Film-Warning; (Jump Start, Read Omm) | 2 |
| 20***07 | Film-Identification; (Air Cleaner) | 1 |
| 23***24 | Plate-Warning; (Do Not Operate) | 1 |
185-1393 Plate & Film Gp -Portuguese
| 10***09 | Film-Warning; (Jumper Cables) | 2 |
| 10***30 | Plate-Warning; (Do Not Operate) | 1 |
| 13***67 | Film-Information; (Air Cleaner) | 1 |
259-0262 Plate & Film Gp -Slovenian
| 19***71 | Bracket As | 2 |
| 25***62 | Plate & Film Group; -Slovenian | 1 |
| 8T***38 | Film-Warning; (Do Not Lift) | 1 |
191-9007 Shipping Ar
| 18***30 | Strap Wrench Assem. | 1 |
| 19***07 | Shipping Ar | 1 |
| 1B***36 | Wrench; (8-In) | 1 |
3u-8686 Tool Gp-Hand
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
| 3U***86 | Tool Group-Hand | 2 |
| 5P***00 | Key Total 2 Pieces Per Unit; (Literature Compartment) | 2 |
7u-1981 Tool Gp-Hand
| 7U***81 | Tool Group-Hand | 1 |
Steering System
149-0065 Control Gp-Steering
| 09***49 | Bolt; (M8x1.25x40-mm) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***40 | Locknut; (M8x1.25-Thd) | 2 |
313-2466 Control Gp-Steering
| 17***78 | Pin-Tapered | 2 |
| 17***17 | Pin-Tapered | 2 |
| 19***36 | Cylinder Group-Steering; -Rh | 1 |
148-9959 Cylinder & Mtg Gp-Steering
| 08***91 | Bolt; (M10x1.5x55-mm) | 2 |
| 10***00 | Ring-Backup | 1 |
| 14***64 | Bolt; (M30x3.5x90-mm) | 1 |
191-5336 Cylinder Gp-Steering -Rh
| 10***00 | Ring-Backup | 1 |
| 14***64 | Bolt; (M30x3.5x90-mm) | 1 |
| 15***13 | Rod As | 1 |
215-3024 Cylinder Gp-Steering -Lh
| 14***64 | Bolt; (M30x3.5x90-mm) | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
209-5024 Cylinder Gp-Steering -Lh
| 10***00 | Ring-Backup | 1 |
| 14***64 | Bolt; (M30x3.5x90-mm) | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
273-3267 Cylinder Gp-Steering -Lh
| 17***01 | Valve Group-Sig & Press Reducing; -Steering | 1 |
| 17***67 | Hose As | 1 |
| 17***68 | Hose As | 1 |
273-3266 Cylinder Gp-Steering -Rh
| 14***64 | Bolt; (M30x3.5x90-mm) | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
211-0604 Cylinder Gp-Steering -Lh
| 14***64 | Bolt; (M30x3.5x90-mm) | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
212-6257 Cylinder Gp-Steering -Rh
| 14***64 | Bolt; (M30x3.5x90-mm) | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
211-0603 Cylinder Gp-Steering -Rh
| 10***00 | Ring-Backup | 1 |
| 14***64 | Bolt; (M30x3.5x90-mm) | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
209-5023 Cylinder Gp-Steering -Rh
| 10***00 | Ring-Backup | 1 |
| 14***64 | Bolt; (M30x3.5x90-mm) | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
191-5337 Cylinder Gp-Steering -Lh
| 10***00 | Ring-Backup | 1 |
| 14***64 | Bolt; (M30x3.5x90-mm) | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
212-6258 Cylinder Gp-Steering -Lh
| 14***64 | Bolt; (M30x3.5x90-mm) | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
215-3023 Cylinder Gp-Steering -Rh
| 14***64 | Bolt; (M30x3.5x90-mm) | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
149-0103 Lines Gp-Steering -Hmu
| 14***27 | Connector Group | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 3 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
245-0983 Lines Gp-Steering -Hmu
| 11***15 | Motor Group-Electric; -Engine Prelubrication-Sec Steering, Brake Release | 1 |
| 11***68 | Gasket | 1 |
| 18***12 | Pump Group-Gear; -Secondary Steering | 1 |
225-8740 Lines Gp-Steering
| 14***27 | Connector Group | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 3 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
234-5605 Lines Gp-Steering
| 10***82 | Hose As | 1 |
| 14***16 | Connector Group | 1 |
| 14***24 | Connector Group | 4 |
149-0007 Lines Gp-Steering
| 14***07 | Lines Group-Steering | 1 |
| 16***30 | Connector | 1 |
| 16***31 | Tube As | 1 |
173-8787 Pump & Motor Gp-Sec Steering
| 17***87 | Pump & Motor Group-Sec Steering | 2 |
| 19***41 | Plate-Mounting | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 4 |
148-9995 Pump & Mtg Gp-Secondary Steer
| 14***95 | Pump & Mtg Group-Secondary Steer | 1 |
| 15***14 | Pump Group-Piston; -Steering | 1 |
| 5F***06 | Packing,Preformed Pump Mtg Part Of Kit P/N 5r***25 | 1 |
148-9992 Pump & Mtg Gp-Steering
| 09***95 | Pin, Dowel | 4 |
| 13***35 | Seal-Shaft | 1 |
| 14***99 | Flange | 1 |
189-6312 Pump Gp-Gear -Secondary Steering
| 14***61 | Race-Bearing | 2 |
| 14***63 | Kit-Seal | 1 |
| 18***12 | Pump Group-Gear; -Secondary Steering | 1 |
199-6611 Pump Gp-Metering -Hmu
| 09***49 | Bolt; (M8x1.25x40-mm) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***40 | Locknut; (M8x1.25-Thd) | 2 |
170-1592 Pump Gp-Metering
| 14***61 | Race-Bearing | 2 |
| 17***92 | Pump Group-Metering | 1 |
| 25***12 | Kit-Seal; (Hmu Steering) | 1 |
252-8050 Steering Column Gp-Adjustable
| 21***27 | Ring | 2 |
| 21***28 | Seal-O-Ring | 1 |
| 21***62 | Kit-Seal | 1 |
189-9367 Steering Column Gp-Adjustable
| 09***49 | Bolt; (M8x1.25x40-mm) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***40 | Locknut; (M8x1.25-Thd) | 2 |
212-5953 Valve Gp-Relief -Steering
| 21***53 | Valve Group-Relief; -Steering | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 2 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
170-1601 Valve Gp-Sig & Press Reducing -Steering
| 13***11 | Valve-Check | 1 |
| 14***33 | Valve Group-Check; (Tank/Supply) | 1 |
| 17***01 | Valve Group-Sig & Press Reducing; -Steering | 1 |
176-5691 Valve Gp-Steer Chk & Combiner
| 07***41 | Seal; (30.3mm Od) | 1 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 12 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
Suspension System
223-2445 Accumulator Gp-Hydraulic -Uncharged
| 22***45 | Accumulator Group-Hydraulic; -Uncharged-Brake | 1 |
223-2444 Accumulator Gp-Hydraulic -Charged
| 17***94 | Kit-Seal; (Ride Control Accumulator) | 1 |
| 19***50 | Core | 1 |
| 22***67 | Valve Group-Accumulator Charging | 1 |
137-1880 Accumulator Gp-Hydraulic -Charged
| 13***80 | Accumulator Group-Hydraulic; -Charged | 1 |
| 15***06 | Valve-Gas | 1 |
| 17***94 | Kit-Seal; (Ride Control Accumulator) | 1 |
143-9422 Accumulator Gp-Suspension -Uncharged
| 14***22 | Accumulator Group-Suspension; -Uncharged | 1 |
| 14***28 | Cylinder Group-Suspension | 2 |
| 17***07 | Washer-Special | 2 |
148-9961 Cylinder & Mtg Gp-Suspension
| 14***61 | Cylinder & Mtg Group-Suspension | 1 |
| 17***07 | Washer-Special | 2 |
| 17***39 | Washer-Special; (22x80x25-mm Thk) | 2 |
210-1886 Cylinder & Mtg Gp-Suspension
| 09***33 | Seal-O-Ring (Id=139.60mm) | 1 |
| 11***89 | Ring | 1 |
| 13***83 | Bolt-12 Point Head; (M10x1.5x30-mm) | 1 |
200-4300 Cylinder Gp-Suspension
| 09***33 | Seal-O-Ring (Id=139.60mm) | 1 |
| 11***89 | Ring | 1 |
| 13***83 | Bolt-12 Point Head; (M10x1.5x30-mm) | 1 |
146-8928 Cylinder Gp-Suspension
| 09***33 | Seal-O-Ring (Id=139.60mm) | 1 |
| 11***61 | Seal-O-Ring | 3 |
| 11***89 | Ring | 1 |
138-1464 Frame Gp-Center Suspension
| 13***64 | Frame Group-Center Suspension | 1 |
| 14***63 | Bearing-Spherical | 2 |
| 15***06 | Rod | 1 |
175-6924 Frame Gp-Front Suspension
| 14***63 | Bearing-Spherical | 2 |
| 15***04 | Bolt; (M24x3x300-mm) | 4 |
| 15***53 | Ring-Clamp | 1 |
137-5003 Frame Gp-Rear Suspension
| 05***58 | "P" Clip | 1 |
| 13***44 | Hose As | 1 |
| 13***80 | Accumulator Group-Hydraulic; -Charged | 2 |
168-6867 Lines Gp-Suspension
| 05***58 | "P" Clip | 1 |
| 13***44 | Hose As | 1 |
| 14***05 | Adapter Group | 1 |
137-5004 Suspension Gp-Rear Equalizer
| 11***92 | Rod | 1 |
| 13***38 | Washer-Plastic; (13x31.7x0.8-mm Thk) | 2 |
| 13***44 | Latch Assem.; (Lh) | 1 |
730 serial number reference
The PIN plate on the Cat 730 family is riveted to the frame; on articulated trucks this is commonly near the front frame/articulation area, with a duplicate plate often mounted in the cab near the operator seat or door pillar. The serial number reads as a 3-character prefix (identifies the specific model, body configuration, and engine build) followed by a sequential unit number. Match the 3-character prefix against the model's parts or service manual cover to confirm exact configuration, engine, and build range.
| Prefix | Identifies | Notes |
|---|---|---|
| AGF | 730 (early box-body ADT, pre C-Series) | Standard 730 articulated truck, box body. Cat C11 engine. Earlier serial block of the pre-C-Series 730, production centered on the early-to-mid 2000s. Corroborated across independent service-manual and parts-catalog listings rather than an official Cat factory prefix table; treat exact start/end serials as dealer-confirm. |
| B1M | 730 (box-body ADT, pre C-Series) | Standard 730 articulated truck, box body. Cat C11 engine. Later serial block than AGF in the same pre-C-Series generation, production spanning roughly mid-2000s into the early 2010s depending on source. Corroborated across independent service-manual and parts-catalog listings; confirm exact build years with dealer. |
| WWB | 730 OEM / bare-chassis ADT | 730 chassis built for OEM body fitment (bare chassis for third-party bodies such as water tanks) rather than a standard dump body. Cat C11 engine. Shares power-train documentation with the 725 OEM chassis line but carries its own distinct prefix. |
| 3T3 | 730 (standard box-body) | Standard 730 articulated truck, box body. Cat C13 engine. |
| 3F3 | 730 (standard box-body) | Standard 730 articulated truck, box body, same generation as 3T3 but a separate serial block (regional or production-line split). Cat C13 engine. |
| 3T4 | 730 EJ (Ejector body) | 730 Ejector variant with a moving-wall ejector body instead of a tipping box. Cat C13 engine. |
| 3F4 | 730 EJ (Ejector body) | 730 Ejector variant, separate serial block parallel to 3T4. Cat C13 engine. |
| LFF | 730C (C-Series, standard box-body) | 730C, part of the C-Series update alongside the 725C and 730C EJ. Cat C13 engine. Emissions tier fitted depends on the destination market (Tier 4 Final in North America; other regions may differ) - confirm exact tier/rating for a given serial with dealer. |
| 2T4 | 730C2 (C2-Series, standard box-body) | 730C2, the update following the 730C, adding enclosed wet brakes on all axles. Production runs mid-to-late 2010s onward. A separate 730C2 prefix block also exists; confirm exact engine tier/rating for a specific serial range with dealer. |
Frequently asked questions
What engine does the Caterpillar 730 use?
It varies by series. The original 730 (around 2001-2005) ran a Cat 3176C or 3196 diesel rated near 228 kW (305 hp). The C-Series 730C2 (roughly 2006-2016) used a Cat C13 ACERT, with some builds on a Cat C11 ACERT, rated about 239-245 kW (320-329 hp). The redesigned 730 (2017 onward) carries a Cat C13 ACERT rated 280 kW gross/274 kW net (375 hp gross/367 hp net). A next-generation 730 beginning production in 2026 uses an updated Cat C13 platform rated within a 257-316 kW (345-424 hp) family band. Check the serial number prefix against factory documentation to confirm which engine is fitted.
What is the operating weight of the Caterpillar 730?
Empty (tare) operating weight runs roughly 22.5 to 23.9 tonnes (about 49,600-52,700 lb) depending on series, tires, and body configuration. Loaded gross weight, with the rated 28-tonne (31-ton) payload aboard, comes in around 51 to 52 tonnes (113,000-115,000 lb). Confirm exact figures against your specific serial number and configuration, since body style and tire choice shift the numbers.
What replaced the Caterpillar 730?
Nothing has discontinued the 730 nameplate outright — Cat has continuously redesigned it instead of retiring it. The original 730 gave way to the C-Series 730C2 around 2006, that generation was updated into the current 730 in 2017 with a new cab, enclosed wet brakes, and automatic traction/retarder control, and a next-generation 730 began production in January 2026 with further cab, engine, and safety updates. For owners of a pre-2006 730, the practical successor in the lineup is the 730C2 generation.
What 730 owners discuss
What's the most common transmission complaint on the 730, and how do techs diagnose it?
Older Tier 2/3-era powershift transmissions on the 730 built a reputation as one of the truck's highest-failure components in the field, with slipping or delayed engagement being the usual symptom rather than a dead stop. First diagnostic step before assuming a controls problem: pull a transmission filter cut and check the suction screen and magnets for metal. On the torque converter side, the lockup clutch and its one-way stator ratchet mechanism is a known wear point - hook a gauge to the lockup clutch pressure test point on the modulating valve (upper left of the transmission case) and watch it during a shift. Later production moved to an electronically controlled clutch pressure strategy that holds direct-drive lockup longer and reduces time spent in converter drive, which eased the failure pattern reported on earlier units. Have your dealer verify before committing to a rebuild - a sticking control valve and a worn clutch pack look similar from the operator's seat but carry very different repair bills.
What wears out first at the center hitch and suspension on a high-hour 730?
The center articulation joint - hitch pin and spherical bearing - is the first thing experienced buyers check. The remote grease line feeding that spherical bearing is fragile and gets pinched or torn in normal operation; once the bearing stops taking grease it runs dry and fails. Field techs note that nearly every spherical bearing failure they've seen in recent years also had a damaged grease line behind it. The field test: raise the box with someone standing clear behind the truck watching the hitch, then rock the machine side to side at the joint - any detectable play means wear has started. Front and rear suspension strut cylinders are the other common wear point: an external oil leak around the seals means the strut has to come off for reseal or rebuild, and a soft or unevenly riding corner points to a low nitrogen charge or worn seal. Have your dealer verify any play at the hitch or leakage at the struts - both are structural/safety items, not cosmetic.
Which engine does the 730 actually run, and does it change across series?
Yes, it varies by series and buyers should not assume one engine across the model's life. The earliest 730 production ran a 3196-family Cat diesel rated around 228 kW (305 hp). Mid-life Tier 2/Tier 3 production shifted to the C-13/C-15 mid-range family, still in the 228-239 kW (305-320 hp) band. The C-series and C2-series trucks (Tier 4 Interim/Final) moved to the C13 ACERT engine, with net power ratings reported anywhere from roughly 240-276 kW (321-370 hp) depending on the specific rating and standard applied (SAE J1995 gross vs. net, etc.) - treat any single horsepower figure as configuration-dependent. The newest redesigned 730 introduced for the next model generation carries a C13B engine. Tier 4 Final/Stage IV trucks require diesel exhaust fluid meeting ISO 22241-1 (DEF/AdBlue-equivalent) for the SCR system, so factor DEF consumption and a working regen cycle into any inspection of a C13 ACERT-equipped truck.
Are there known electrical or sensor issues owners run into on the 730?
Two recurring themes show up in owner and shop discussions. First, the onboard payload/VIMS weighing system uses strain-gauge sensors that are sensitive to temperature compensation, and operators report the readings can drift enough to be questioned - some owners have pushed back on payload data being used to argue a truck was overloaded (a factor in hitch or driveline warranty claims), so don't treat the payload display as a substitute for a physical inspection. Second, general electrical fault codes on these trucks frequently trace back to aging relays: contact resistance builds up as a relay ages, eventually bleeding off enough current to trip a fault code that looks like a sensor or circuit failure. A no-start condition that goes away when the CAN data link between the engine ECM, transmission control, and telematics module is unplugged points to a wiring or connector fault on that data link rather than the engine itself. Have your dealer verify any payload or fault-code discrepancy against actual sensor calibration data before condemning a component.
Is there a typical tire or driveline wear pattern to look for on a 730?
Standard fitment on the 730/730C2 family is a 23.5-25 tire, though exact size and radial vs. bias-ply spec varies by configuration and region - confirm against the specific truck's data plate rather than assuming. The truck's automatic traction control system is designed to engage the inter-axle and cross-axle differential locks on the go without operator input specifically to cut down on tire scrub and driveline stress that comes from operators manually engaging diff locks late or leaving them engaged too long. On a used truck, uneven or accelerated wear across the six tire positions, or an operator who says the diff lock light is always on, both suggest either a traction control fault or a history of hard manual override - worth a test drive on loose or graded material before buying.
What should a buyer specifically check when looking at a used 730?
Beyond a standard walk-around, focus on the items that are expensive to ignore. Center hitch and steering cylinders: cycle the articulation and look/feel for play - repair here is a major cost if the joint or cylinders are worn. Box and liner: raise the body and check whether material sticks to the liner, and look for sideboards (a sign of past overloading) - liner replacement is a significant expense. Retarder: confirm it actually slows the truck on a grade; if it doesn't, the service brakes have likely been carrying the load and may be worn ahead of their hour meter. Fluids: pull dipsticks and sight glasses on engine oil, transmission, and hydraulic tank, and look for the color/smell of contamination rather than just the level. Transmission: run it through every gear forward and reverse, listening for hesitation or harsh engagement. Documentation: get full service history and match the serial number and engine/transmission serials against the paperwork - mismatches are a red flag on a truck that's been through a component swap. Have your dealer verify hitch play, retarder function, and any fluid contamination found during the walk-around before finalizing a purchase - these three items are the ones most likely to turn into large post-purchase repair bills.
Why is the 730 EJ (ejector) body different, and does it change maintenance?
The EJ variant replaces the tailgate dump body with a full-width ejector blade that pushes material out the back instead of hoisting the box, which is aimed at sticky, wet, or fine material that otherwise hangs up in a conventional dump body and at low-headroom sites where a raised box is a hazard. It uses a single hydraulic ram to drive the ejector blade rather than the twin hoist cylinders on a standard dump body, so a pre-purchase check should include cycling the ejector fully to confirm smooth, even travel with no hesitation or binding, since a sticking blade or slow cycle time usually points to the same pump wear, contamination, or valve issues that affect any hydraulic circuit on the truck. Confirm during a demo that the blade retracts fully and seals properly at the front of the body - an ejector that doesn't return all the way reduces usable box capacity.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Caterpillar 730. Related factory variants of the same model family:
730
Need a specific 730 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.