Caterpillarchallenger
Caterpillar 65E
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar Challenger 65E is a rubber-track, high-horsepower agricultural tractor built on Caterpillar's Mobile-Trac System undercarriage. It runs a Cat 3176C turbocharged, aftercooled 10.3 L (629 ci) inline six-cylinder diesel rated near 310 hp (231 kW) gross at 2100 rpm, paired with a 10-speed forward / 2-speed reverse full powershift transmission and hydrostatic differential steering. Operating weight runs around 15,510 kg (34,195 lb), and varies with ballast, tire/track width, and attached implements. Caterpillar built the 65E from 1998 to 2001 at its DeKalb, Illinois plant as the entry-level tractor in the E-series line (65E, 75E, 85E, 95E). It followed the 65D (1995-97) in a lineage that traces back to the original Challenger 65 of 1986 through the 65B and 65C, each generation raising engine output while keeping the same basic track-and-drivewheel architecture. Configurations offered included a closed-center hydraulic system with up to four remote valves, a Category III/IV rear hitch rated for roughly 5,985 kg (13,194 lb) of lift, and a pressurized, air-conditioned cab.
Across the 65B-to-65E progression, Caterpillar pushed gross engine output up substantially while refining the same rubber-belted undercarriage rather than redesigning it. The track tensioning system changed from a mechanical-spring-only design on the earliest 65 and 65B tractors to a mechanical-spring-plus-nitrogen-charge tensioner starting with the C-series, and alignment shims moved from one-piece to split shims partway through C-series production, cutting the labor needed to reshim a track. The 65E is the last Caterpillar-badged tractor of this size class - Caterpillar sold its Challenger track-tractor business to AGCO in 2002 and closed the DeKalb plant, ending its own run in row-crop and tillage tractors. In the used and parts market today, the 65E holds value because its Cat 3176-family engine and Mobile-Trac undercarriage share design and service commonality with its 75E/85E/95E siblings and with Caterpillar's wider industrial and on-highway 3176 engine base, keeping parts sourcing realistic for an out-of-production platform. Buyers look at it as an affordable way into rubber-track flotation and Cat power for tillage and planting work, provided the undercarriage and tensioner bushings have been kept up.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 65E specifications
Engine
| Engine model | Caterpillar 3176C, turbocharged, aftercooled diesel |
| Displacement | 10.3 L (629 cu in) |
| Cylinders | 6, inline, 24-valve, liquid-cooled |
| Bore x stroke | 125 x 140 mm (4.92 x 5.51 in) |
| Compression ratio | 16:1 |
| Gross power | 231.2 kW (310 hp) at 2100 rpm (manufacturer rating) |
| PTO power (tested, max) | 230.4 kW (309 hp), OECD test; PTO power at rated engine speed 206.5 kW (277 hp) |
| Drawbar power (tested, max) | 184.9 kW (248 hp) |
| Air cleaner | Dual paper element |
| Production years | 1998 to 2001 |
Weights
| Operating weight | 15,510 kg (34,195 lb) |
| Maximum gross weight | 18,597 kg (41,000 lb) |
| Ground contact / pressure area | Varies with track width option (25 in, 30 in, or 35 in rubber belts); published ground contact area ranges roughly 3.45-4.84 m2 (5,355-7,497 sq in) depending on track width, so ground pressure varies by configuration |
Dimensions
| Overall length | 599 cm (236 in) |
| Overall width | Reported as 284 cm (112 in) on a 25 in track; width varies by track width configuration (25 in, 30 in, or 35 in belts) |
| Overall height (to cab) | 340 cm (134 in) |
| Overall height (to exhaust) | 365 cm (144 in) |
| Wheelbase | 272 cm (107.1 in) |
| Track gauge | 228 cm (90 in) |
| Ground clearance | 35 cm (14 in) |
| Track width options | 25 in, 30 in, or 35 in rubber belted track, interchangeable |
Performance
| Transmission | Full powershift, 10 forward / 2 reverse speeds |
| Steering | Hydrostatic differential steering |
| Travel speed range | Not published in verifiable detail; independent test summaries omit gear-by-gear mph/km-h figures, so exact top travel speed is not confirmed here - verify with dealer or operator's manual |
| Maximum drawbar pull (tested) | 15,097 kg (33,284 lb) |
| PTO speed | 1000 rpm (standard) |
| Fuel consumption at max PTO power (tested) | 62.1 L/hour (16.4 gal/hour) |
| Fuel consumption at rated engine speed (tested) | 57.5 L/hour (15.2 gal/hour) |
Service capacities (summary)
| Fuel tank | 1,059.8 L (280 US gal) |
| Hydraulic system | 68.1 L (18 US gal), system pressure approximately 200 bar (2,900 psi), 4-valve configuration with roughly 151 L/min (40 gpm) pump flow |
| Engine oil | 30.3 L (32 qt) |
| Cooling system | 56.8 L (60 qt / 15 US gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
65E fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) - Cat 3176 10.3L inline-6 turbocharged diesel | approx. 28 L (7.5 US gal) typical for this engine family - exact chassis-specific OMM figure not confirmed, verify with dealer/OMM | Cat DEO diesel engine oil, API CH-4 or better. SAE 15W-40 for general/warm climates; SAE 10W-30 recommended in cold climates below roughly -18C (0F). |
| Cooling system | 56.8 L (15.0 US gal / 60 qt) | Cat ELC (Extended Life Coolant) full-strength glycol-based antifreeze/coolant, or equivalent Caterpillar-approved coolant. |
| Fuel tank | 1059.8 L (280 US gal) | No. 2-D diesel fuel per Cat spec. Blend with No. 1-D or use a winterized blend in cold weather (roughly below -7C to -18C) to prevent gelling. |
| Transmission (powershift, 10F/2R) - separate sump from hydraulic/steering circuit | Not documented in available sources for this exact configuration - verify with dealer/OMM | Cat MTO (Multipurpose Tractor Oil), Caterpillar's specified fluid for Challenger transmissions of this era. Factory fill is a light, straight SAE 10W-equivalent multigrade, cold-rated to about -25C (-13F). Does not meet Cat TO-4 spec - do not substitute TDTO where MTO is called for. |
| Final drives (each side, sealed planetary) | Not documented in available sources for this exact configuration - verify with dealer/OMM | Cat MTO (Multipurpose Tractor Oil), same fluid family used across the Challenger drivetrain compartments on this generation. |
| Hydraulic system and tank (closed-center, 4-valve) | 68.1 L (18.0 US gal) | Cat MTO (Multipurpose Tractor Oil). Cat's Challenger tractors of this era ship with straight 10W-equivalent hydraulic oil rather than the 15W-30 common on competitor brands - avoid mixing when swapping implements between differently-filled machines. |
| Grease (spec only, all chassis/track/pin fittings) | N/A - spec only | Cat Multipurpose Grease (lithium complex base, NLGI 2) or equivalent extreme-pressure chassis grease. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 65E maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the 65E beyond the schedule
Predictive Maintenance & Fluid Analysis
Pull oil samples from the 65E's Cat 3176C engine and TDTO-spec powershift transmission at every scheduled change to track bearing, ring, and injector wear before it becomes a shutdown. Sample hydraulic oil too - the closed-center, 2900 psi system is unforgiving of contamination and shows up first in slow steering or hitch response. Track wear is predictive as well: road the tractor, then check guide-lug temperature with an infrared gun. A side-to-side spread over 15-20°F means misalignment is already chewing into the midrollers and drivewheel.
Corrective & Common Repairs
Tensioner bushings at the front axle end and frame end are a recurring wear point on the 65E's Mobile-Trac undercarriage; worn bushings drop track tension and let the drivewheel slip against the belt. Midroller and drivewheel rubber chunks and rounds off under row-crop use - replace midrollers in matched sets on one axle, never one at a time. On the 3176C, fouled fuel filters and injectors show up first as rough idle or smoke under load. Hydrostatic steering motor seals are another common leak point on high-hour units.
Overhaul & Rebuild Points
Plan front idler replacement around 3000-4000 hours on pneumatic-idler machines, sooner if sidewall cracking appears; non-gel units fatigue with age even at low hours. A full undercarriage rebuild should cover track, midrollers, drivewheel, and idlers together, since they wear as a system and mixing new and worn components accelerates failure. Reseal the tension cylinders and replace bushings as a set during any major undercarriage job. On the engine side, budget a 3176C top-end and injector overhaul once oil analysis trends show rising wear metals or falling compression.
Seasonal & Environment Servicing
Wet spring tillage packs mud and crop residue into the midrollers and equalizer area daily - wash it out before it hardens and loads the undercarriage. Check air suspension bag pressure (65-90 psi, 75 psi target) more often through temperature swings, since air volume shifts with heat and cold. Cold starts on the 3176C call for the correct winter-grade DEO viscosity and a block heater below freezing; summer dust loads mean more frequent air filter and radiator/aftercooler screen cleaning during harvest. Re-tension tracks as rubber contracts in cold weather.
65E common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 1R-0762 | Filter As-Fuel | Fuel system service | Check fitment → |
| 129-0375 | Bowl As-Water Collection | Fuel system service | Check fitment → |
| 133-5673 | Element | Fuel system service | Check fitment → |
| 122-1674 | Filter Element As-Air | Air intake service | Check fitment → |
| 6I-0273 | Filter Element As-Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
65E fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| CID 100 - FMI 01 | Engine oil pressure below normal operating range for current rpm. | Low oil level, plugged oil filter, worn oil pump, or oil diluted with fuel. | Stop engine as soon as safe. Check oil level and filter condition before restart; do not run engine until cause is found. |
| CID 100 - FMI 03/04 | Oil pressure sensor circuit reading voltage above or below the valid range (sensor/wiring fault, not necessarily a real pressure problem). | Damaged sensor, corroded connector, or chafed harness wire on the oil pressure sensor circuit. | Inspect sensor connector and harness for damage or corrosion; test sensor per ADEM ECM diagnostic procedure with Cat ET. |
| CID 1-6 - FMI 05 | Injector solenoid circuit for the numbered cylinder (1 through 6) reading current below normal - open circuit. | Broken injector harness wire, bad connector pin, or failed injector solenoid coil. | Check continuity of the injector wiring for that cylinder and inspect the connector; replace injector if solenoid tests open. |
| CID 1-6 - FMI 06 | Injector solenoid circuit for the numbered cylinder reading current above normal - short circuit. | Harness wire shorted to ground or power, or an internally shorted injector solenoid. | Inspect harness for chafing or pinch points near the valve cover; replace the injector if the short is internal to the solenoid. |
| CID 41 - FMI 03/04 | 8-volt sensor supply from the ECM is above or below normal range, which can affect several sensors at once. | A shorted sensor pulling the shared 8V supply down, or an open/high-resistance connection in the supply wiring. | Disconnect sensors on the 8V supply circuit one at a time to isolate the short, then check supply wiring and ECM connector. |
| CID 91 - FMI 08/13 | Throttle position sensor signal is erratic, out of frequency range, or the sensor needs calibration. | Worn or misadjusted throttle sensor, linkage wear, or the sensor was never calibrated after a service event. | Inspect throttle linkage for wear, then run the throttle position sensor calibration procedure with Cat ET. |
| CID 94 - FMI 01/03/04 | HEUI fuel/actuation pressure reading is below normal, or the pressure sensor circuit is out of range. | Low engine oil supply to the high-pressure oil pump, worn HEUI pump, restricted fuel supply, or a faulty pressure sensor. | Check engine oil level and fuel supply first, then test the high-pressure oil pump and sensor wiring if the fault repeats. |
| CID 22 - FMI 13 | Engine timing sensor/calibration is required by the ECM. | Timing sensor, injector, or ECM was replaced or disturbed and the timing calibration procedure was not run afterward. | Perform the engine timing calibration procedure with Cat ET before returning the tractor to service. |
| Flash Code 53 | ECM has logged an internal fault in the electronic control module itself. | Internal ADEM control module failure. | Confirm with Cat ET, then replace the ECM/personality module as the code does not clear with wiring repairs. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
65E attachments & work tools
Drawbar / towing hitch
Rear swinging or rigid drawbar is the primary mount for pull-type tillage, seeding, and towed implements on this articulated 4WD platform. Published load rating is not consistent across dealer literature for this exact model - confirm rated pull capacity with a dealer before towing heavy loads.
Three-point hitch (rear linkage)
Rear three-point linkage is a factory option rather than standard equipment, offered in Category III / IIIN configuration with position and draft control. Rated lift capacity at the ball ends is documented around 5,984 kg (13,194 lb), enough for heavier mounted tillage and seeding tools than smaller Challenger frames carry.
PTO (power take-off)
Rear PTO is also a factory option, independent type, running at 1000 rpm through a 44 mm (1-3/4 in), 20-spline shaft at roughly 2,050 engine rpm. Shaft size matches the large-frame class used for PTO-driven forage, fertilizer, and similar implements.
Hydraulic remote valves (SCVs)
Closed-center hydraulic system supplies about 151 L/min (40 US gpm) at roughly 20 MPa (2,900 psi) from an 18 US gal (68 L) reservoir. Rear selective control valve remotes are documented in both 3-valve and 4-valve configurations depending on order build, the connection point for cylinder- or motor-driven mounted and towed tools.
Rubber-belted track (Mobil-trac) width options
Undercarriage accepts rubber belted tracks in 635 mm (25 in), 762 mm (30 in), and 915 mm (36 in) widths, shared across the 65-95 Challenger frame size. Wider belts add flotation and lower ground pressure for tillage and grain-cart pulling; narrower belts suit row-crop clearance. All widths share a 152.4 mm (6 in) pitch belt on this frame.
Cab guarding / ROPS-FOPS
Factory cab is ROPS/FOPS-rated as delivered. Sunshade or canopy and screen-type guarding show up mainly as aftermarket additions rather than a documented factory option list for this specific model - verify current fitment with a dealer.
All 65E assemblies by section
Every catalogued assembly group for the Caterpillar 65E. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
136-4955 Aftercooler Gp-Air
| 10***82 | Latch As-Enclosure | 4 |
| 13***19 | Plate-Support | 1 |
| 13***21 | Aftercooler As | 1 |
147-6948 Air Cleaner Gp
| 12***74 | Filter Element As-Air; -Air-High Efficiency | 1 |
| 14***48 | Air Cleaner Group | 1 |
| 4P***24 | Seal-O-Ring | 1 |
135-7699 Air Cleaner Gp
| 13***99 | Air Cleaner Group | 1 |
| 14***07 | Plate As | 1 |
| 14***48 | Air Cleaner Group | 1 |
4p-2881 Cartridge Gp-Turbocharger
| 11***30 | Nut-Compressor | 1 |
| 11***46 | Shaft As-Turbine | 1 |
| 4P***81 | Cartridge Group-Turbocharger | 1 |
6i-0153 Dust Ejector Gp
| 5P***97 | Clamp Fumes Disposal | 2 |
| 5P***17 | Hose; 7cm(2.76in) | 0 |
| 6I***53 | Dust Ejector Group | 1 |
136-4294 Extension Gp-Air Cleaner
| 13***61 | Clamp | 2 |
| 13***94 | Extension Group-Air Cleaner | 1 |
| 14***83 | Tube As | 1 |
6i-0138 Extension Gp-Exhaust
| 6I***38 | Extension Group-Exhaust | 1 |
| 6I***39 | Extension-Exhaust | 1 |
| 6V***01 | Nut; (3/8-16-Thd)(Plate To Rh And Lh Bracket As) | 1 |
9u-1690 Indicator Gp-Air Filter Change
| 1W***13 | Indicator-Air Filter Service; (Air Filter) | 1 |
| 5L***33 | Fitting (To Air Cleaner) | 1 |
| 9U***90 | Indicator Group-Filter Change | 1 |
148-5457 Lines Gp-Air
| 10***25 | Gasket; (Air Inlet Manifold)(Intake Manifold Inlet) | 1 |
| 12***21 | Elbow | 1 |
| 14***06 | Tube-Outlet | 1 |
136-5103 Lines Gp-Air
| 11***25 | Hose | 1 |
| 13***03 | Lines Group-Air | 1 |
| 14***53 | Tube-Inlet | 1 |
117-2755 Manifold Gp-Exhaust
| 10***13 | Gasket | 6 |
| 11***15 | Stud-Taperlock; (M10x85-mm Oal) | 12 |
| 11***55 | Manifold Group-Exhaust | 1 |
116-5405 Manifold Gp-Inlet
| 11***05 | Manifold Group-Inlet | 1 |
| 11***06 | Manifold; (Inlet) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
136-5109 Muffler Gp
| 13***09 | Muffler Group | 1 |
| 14***69 | Clamp | 1 |
| 16***51 | Muffler As | 1 |
169-0016 Muffler Gp
| 13***08 | Muffler As | 1 |
| 14***69 | Clamp | 1 |
| 16***16 | Muffler Group | 1 |
133-7027 Turbocharger Gp
| 13***27 | Turbocharger Group | 1 |
| 13***35 | Turbocharger Group | 1 |
| 1P***51 | Gasket; (Turbocharger) | 1 |
136-4835 Turbocharger Gp
| 10***28 | Cover-Compressor | 1 |
| 10***79 | Housing-Turbine | 1 |
| 13***35 | Turbocharger Group | 1 |
Basic Engine
180-1647 Air Compressor Gp -Trailer Brakes
| 14***54 | Seal-O-Ring | 1 |
| 15***76 | Washer; (Contact) | 4 |
| 15***77 | Washer | 4 |
115-9382 Camshaft Gp
| 11***82 | Camshaft Group | 1 |
| 11***59 | Cover | 1 |
| 12***11 | Journal | 1 |
115-2985 Cover Gp-Cylinder Block
| 11***85 | Cover Group-Cylinder Block | 1 |
| 4P***87 | Cover | 1 |
| 6V***50 | Seal-O-Ring (Id=39.34mm) | 1 |
136-4307 Cover Gp-Front Housing
| 13***07 | Cover Group-Front Housing; -Hydraulic Pump Drive | 1 |
| 1H***39 | Packing,Preformed Cover Part Of Kit P/N 4j***80 | 1 |
| 4P***50 | Cover | 1 |
122-0761 Cover Gp-Front Housing
| 06***55 | Seal-O-Ring (Id=47.22mm) | 3 |
| 12***61 | Cover Group-Front Housing | 1 |
| 6V***40 | Bolt (M8x1.25x25mm); (M8x1.25x25-mm) | 2 |
117-2743 Crankshaft Gp
| 11***43 | Crankshaft Group | 1 |
| 12***82 | Bearing-Main; (0.51-mm Us)(.51mm U.S.) | 0 |
| 12***83 | Bearing-Main; (0.76-mm Us)(.76mm U.S.) | 0 |
148-2062 Cylinder Block As
| 11***66 | Cap; (Bearing) | 7 |
| 12***16 | Bearing; (Sleeve) | 5 |
| 12***17 | Bearing-Sleeve; (Narrow) | 1 |
200-2054 Cylinder Block As
| 11***66 | Cap; (Bearing) | 7 |
| 17***54 | Bolt-Hex Head; (M16x160mm) | 14 |
| 20***54 | Cylinder Block As | 1 |
148-2095 Cylinder Block As
| 10***60 | Seal; (Liner) | 6 |
| 14***62 | Cylinder Block As | 1 |
| 14***95 | Cylinder Block As | 1 |
204-3450 Cylinder Block As
| 10***60 | Seal; (Liner) | 6 |
| 14***25 | Liner-Cylinder Block | 6 |
| 16***63 | Shim-Liner; -Cylinder | 0 |
144-2958 Cylinder Block As
| 10***60 | Seal; (Liner) | 6 |
| 12***07 | Cylinder Block As | 1 |
| 14***58 | Cylinder Block As | 1 |
128-0407 Cylinder Block As
| 11***66 | Cap; (Bearing) | 7 |
| 12***07 | Cylinder Block As | 1 |
| 12***16 | Bearing; (Sleeve) | 5 |
115-2982 Cylinder Block Gp
| 11***82 | Cylinder Block Group | 1 |
| 14***58 | Cylinder Block As | 1 |
| 1N***99 | Plug-O-Ring; (Straight Thread) | 2 |
179-9462 Cylinder Head As
| 10***50 | Guide-Valve; (Standard) | 24 |
| 17***59 | Cylinder Head As | 1 |
| 17***62 | Cylinder Head As | 1 |
179-9459 Cylinder Head As
| 11***02 | Sleeve; (Injector) | 6 |
| 13***06 | Insert-Valve Seat; (Inlet)(Standard) | 12 |
| 14***52 | Insert-Valve Seat; (0.508-mm Os Od)(0.508-mm Os Od) | 12 |
144-2950 Cylinder Head As
| 11***02 | Sleeve; (Injector) | 6 |
| 13***97 | Insert-Valve Seat; (Exhaust) | 12 |
| 13***06 | Insert-Valve Seat; (Inlet)(Standard) | 12 |
148-2150 Cylinder Head As
| 11***02 | Sleeve; (Injector) | 6 |
| 13***97 | Insert-Valve Seat; (Exhaust) | 12 |
| 13***06 | Insert-Valve Seat; (Inlet)(Standard) | 12 |
144-2968 Cylinder Head As
| 10***50 | Guide-Valve; (Standard) | 24 |
| 14***50 | Cylinder Head As | 1 |
| 14***68 | Cylinder Head As | 1 |
116-1085 Cylinder Head Gp
| 11***85 | Cylinder Head Group | 1 |
| 14***67 | Cylinder Head Group | 1 |
| 16***86 | Gasket As-Cylinder Head | 1 |
144-2967 Cylinder Head Gp
| 10***50 | Guide-Valve; (Standard) | 24 |
| 12***93 | Valve-Exhaust | 12 |
| 14***50 | Cylinder Head As | 1 |
148-2149 Cylinder Head Gp
| 10***50 | Guide-Valve; (Standard) | 24 |
| 10***34 | Guide-Valve; (0.127-mm Os Od) | 0 |
| 10***35 | Guide-Valve; (0.508-mm Os Od) | 0 |
117-2766 Damper Gp
| 11***66 | Damper Group | 1 |
| 13***83 | Bolt-12 Point Head; (M10x1.5x30-mm) | 8 |
| 16***25 | Damper Assem. | 1 |
136-4562 Drive Gp-Fan
| 13***62 | Drive Group-Fan | 1 |
| 13***22 | Bracket As-Fan | 1 |
| 1A***60 | Capscrew, Hex Head (1/2 - 13 X 2 G5); (Hex Head) (1/2-13x2 Gd 8 Z) | 4 |
116-1083 Fastener Gp-Cylinder Head
| 11***83 | Fastener Group-Cylinder Head; (Cylinder Head) | 1 |
| 12***84 | Bolt; (Hex Head) (M16x2x160mm) | 26 |
| 2S***58 | Washer-Hard; (17x29x3-mm Thk)(Engine Brake) | 26 |
117-2771 Fastener Gp-Damper & Pulley
| 11***71 | Fastener Group-Damper & Pulley | 1 |
| 21***85 | Spacer; (10.5-mm Thk) | 1 |
| 8T***81 | Bolt; (M16x2.0x80mm) | 6 |
138-2539 Fastener Gp-Front Housing
| 13***39 | Fastener Group-Front Housing | 1 |
| 6V***49 | Nut-Hard; (M12 X 1.75) | 2 |
| 7D***49 | Washer (Flywheel Counter Balance Weight) | 2 |
117-2792 Fastener Gp-Oil Cooler -Engine
| 11***92 | Fastener Group-Oil Cooler; -Engine | 1 |
| 6V***17 | Bolt; (M8x1.25x30-mm)(Location Z) | 1 |
| 9M***74 | Washer-Hard; (8.8x16x2-mm Thk)(Hard) | 1 |
102-3596 Flywheel Gp
| 10***96 | Flywheel Group | 1 |
| 16***24 | Flywheel As | 1 |
| 4N***14 | Gear; (113-Teeth)(Flywheel Starter) | 1 |
117-2750 Gear Gp-Front
| 11***50 | Gear Group-Front | 1 |
| 13***83 | Shaft | 1 |
| 13***86 | Gear As; (Idler) (71 Teeth) | 1 |
117-2775 Housing Gp-Flywheel
| 06***55 | Seal-O-Ring (Id=47.22mm) | 1 |
| 11***75 | Housing Group-Flywheel | 1 |
| 14***73 | Housing-Flywheel, Threaded Tie-Rod, Threaded Tie-Rod; Replaces 421694a1 | 1 |
115-3006 Housing Gp-Front
| 11***06 | Housing Group-Front; (Front) | 1 |
| 11***24 | Gear; (Pump Drive) (34 Teeth) | 1 |
| 13***96 | Housing As; (Front) | 1 |
115-9386 Lifter Gp-Valve -Mechanism
| 0T***00 | Plug (.5625" Diameter) | 2 |
| 11***86 | Lifter Group-Valve; -Mechanism | 1 |
| 11***91 | Shaft As; (Lifter) | 1 |
148-2063 Lifter Gp-Valve -Mechanism
| 0L***26 | Plug -13mm(.512 In.) Outside Dia. | 2 |
| 12***93 | Dowel | 1 |
| 14***63 | Lifter Group-Valve; -Mechanism | 1 |
117-2748 Lifting Gp-Engine
| 11***05 | Plate; (Lifting Eye) | 2 |
| 11***48 | Lifting Group-Engine | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 6 |
137-4982 Mounting Gp-Alternator
| 11***19 | Bracket | 1 |
| 13***42 | Bracket | 1 |
| 13***81 | Bracket | 1 |
148-6726 Mounting Gp-Engine
| 13***78 | Bracket As | 1 |
| 14***26 | Mounting Group-Engine | 1 |
| 16***88 | Angle-Support | 2 |
138-2550 Mounting Gp-Fan Drive
| 12***64 | Stud; (M12x1.75x86.3-mm Oal) | 2 |
| 13***50 | Mounting Group-Fan Drive; (Short) | 1 |
| 5R***37 | Washer; (Seal) (1.27mm Thk) | 2 |
125-8115 Mounting Gp-Fan Drive
| 12***15 | Mounting Group-Fan Drive | 1 |
| 12***16 | Plate As | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 4 |
115-9376 Mounting Gp-Refrigerant Compr
| 11***76 | Mounting Group-Refrigerant Compr | 1 |
116-5408 Mounting Gp-Valve Mechanism
| 11***83 | Fastener Group-Cylinder Head; (Cylinder Head) | 1 |
| 11***08 | Mounting Group-Valve Mechanism | 1 |
| 17***68 | Bridge As-Valve; (Intake) | 12 |
126-0144 Pan Gp-Oil -Engine
| 06***58 | Seal-O-Ring; (Oil Pan Drain Plug) | 2 |
| 10***08 | Gasket; (Oil Pan) | 1 |
| 12***57 | Bell As; (Suction) | 1 |
116-5371 Piston & Rod Gp
| 10***19 | Ring; (Piston) (Intermediate) | 1 |
| 11***71 | Piston & Rod Group | 1 |
| 12***90 | Bearing; (Connecting Rod) (.51mm U.S.) | 1 |
138-2028 Plug Gp-Cylinder Block
| 13***28 | Plug Group-Cylinder Block | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
117-0165 Plug Gp-Cylinder Block
| 11***65 | Plug Group-Cylinder Block; -Oil Gallery, End | 1 |
| 3B***23 | Core Plug--Flywheel Housing Pinion Shaft Hole | 1 |
117-0185 Plug Gp-Cylinder Block
| 11***85 | Plug Group-Cylinder Block; (Cylinder Block) | 1 |
| 6V***89 | Seal-O-Ring (Id=19.18mm) | 1 |
| 9S***06 | Plug (Front 5 Stem Main Control Valve) | 1 |
116-5452 Plug Gp-Front Housing
| 11***52 | Plug Group-Front Housing; (Front Housing) | 1 |
| 8L***86 | Seal-O-Ring (Id=16.36mm); (16.36-mm Id) | 1 |
| 9S***05 | Plug-O-Ring; (Straight Thread O-Ring) | 1 |
135-6058 Pulley Gp-Alternator
| 13***58 | Pulley Group-Alternator | 1 |
| 16***31 | Adapter-Fan | 1 |
| 17***98 | Pulley-Fan | 1 |
100-4384 Pulley Gp-Auxiliary Drive
| 10***84 | Pulley Group-Auxiliary Drive | 1 |
| 10***13 | Pulley-Crankshaft | 1 |
| 5P***47 | Washer (Bracket To Valve Support) | 6 |
138-2579 Pulley Gp-Crankshaft
| 13***95 | Pulley-Crankshaft | 1 |
| 13***79 | Pulley Group-Crankshaft | 1 |
151-1350 Pulley Gp-Crankshaft
| 15***50 | Pulley Group-Crankshaft | 1 |
| 3S***48 | V-Belt; (Auxiliary Sea Water) | 1 |
| 5L***14 | V-Belt Set | 1 |
115-9397 Rocker Arm Gp
| 09***14 | Pin; (Spring) | 1 |
| 11***97 | Rocker Arm Group | 1 |
| 11***98 | Arm; (Valve Rocker) (Exhaust) | 2 |
116-1091 Seal Gp-Crankshaft
| 10***80 | Seal-O-Ring (Id=177.17mm) | 1 |
| 11***91 | Seal Group-Crankshaft; -Single Lip | 1 |
| 16***23 | Cover | 1 |
7e-7673 Support Gp-Engine
| 13***30 | Support As-Front | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 8 |
| 6V***36 | Bolt; (M12x1.75x70-mm) | 8 |
117-2749 Valve Mechanism Gp -Engine
| 10***42 | Base-Valve Mechanism Cover | 1 |
| 10***67 | Pushrod; (Valve) | 12 |
| 10***68 | Pushrod-Injector | 6 |
Braking System
8r-0753 Brake Gp-Caliper
| 1A***58 | Bolt 1.75 In. (44.45 mm) Long | 8 |
| 3V***97 | Bolt; (3/8-16x1-In) | 4 |
| 4V***50 | Seal-Rectangular | 3 |
3w-5071 Brake Gp-Parking
| 0S***73 | Bolt 50.80 mm(2 In.) Long | 2 |
| 1F***50 | Nut Rops Support | 2 |
| 3J***91 | Spring | 1 |
131-5007 Accumulator Gp-Brake
| 03***13 | Screw-Forming; (10-24x0.37-In) | 2 |
| 06***36 | Protector-Gas Valve | 1 |
| 11***00 | Kit-Service; (Brake Accumulator) | 1 |
136-4398 Accumulator Gp-Brake
| 03***13 | Screw-Forming; (10-24x0.37-In) | 2 |
| 06***36 | Protector-Gas Valve | 1 |
| 11***00 | Kit-Service; (Brake Accumulator) | 1 |
198-0873 Brake & Mtg Gp-Service -Brake Steering
| 19***73 | Brake & Mtg Group-Service; -Brake Steering | 1 |
| 19***74 | Disc | 2 |
| 19***75 | Bracket | 4 |
180-1652 Brake Ar-Trailer
| 12***24 | Clamp | 4 |
| 14***82 | Conduit | 1 |
| 14***73 | Bolt | 2 |
8r-8471 Brake Gp
| 1H***34 | Ring-Retaining; (External) | 1 |
| 3B***01 | Pin,Cotter Bolt | 4 |
| 3W***09 | Rod | 2 |
153-2384 Control Gp-Clutch & Brake
148-3573 Kit-Brake Repair
| 14***73 | Kit-Brake Repair | 1 |
148-3555 Lines Gp-Brake
| 10***73 | Clip | 3 |
| 13***07 | Accumulator Group-Brake | 1 |
| 14***60 | Valve Group-Brake | 1 |
180-1648 Pump & Valve Gp-Brake -Trailer
| 15***76 | Washer; (Contact) | 3 |
| 18***48 | Pump & Valve Group-Brake; -Trailer | 1 |
| 18***22 | Pump; (Antifreeze) | 1 |
180-1649 Tank Gp-Air -Trailer Brakes
| 14***91 | Seal-O-Ring | 2 |
| 15***77 | Washer | 2 |
| 15***26 | Plug-Locking | 1 |
145-9560 Valve Gp-Brake
| 06***34 | Filter Element-Oil; (Brake Valve) | 1 |
| 14***60 | Valve Group-Brake | 1 |
| 14***73 | Kit-Brake Repair | 1 |
Cooling System
115-2990 Cooler Gp-Engine Oil
| 06***40 | Seal-O-Ring (Id=37.69mm) | 2 |
| 10***25 | Gasket | 1 |
| 11***90 | Cooler Group-Engine Oil; (Engine Oil) | 1 |
136-4923 Cooler Gp-Oil
| 13***11 | Seal | 1 |
| 13***15 | Guard-Debris | 1 |
| 13***23 | Cooler Group-Oil | 1 |
136-4881 Cooling Gp-Supplemental
| 13***81 | Cooling Group-Supplemental | 1 |
| 14***08 | Bracket As | 1 |
| 14***09 | Strap As | 2 |
136-4902 Fan Gp-Suction
| 13***02 | Fan Group-Suction | 1 |
| 13***04 | Shield-Fan Blast | 1 |
| 13***79 | Guard As-Fan Lh | 1 |
116-5456 Housing & Regulator Gp -Engine Coolant Temperature
| 11***56 | Housing & Regulator Group; -Engine Coolant Temperature | 1 |
| 11***00 | Housing As-Regulator | 1 |
| 12***11 | Stud; (M8x1.25-Thd)(M8x1.25 Thd Both Ends) | 4 |
117-2778 Lines Gp-Water -Water Pump Inlet Elbow
| 10***35 | Gasket | 1 |
| 10***85 | Elbow; (Water Pump) | 1 |
| 11***78 | Lines Group-Water; -Water Pump Inlet Elbow | 1 |
116-5460 Lines Gp-Water -Bypass
| 10***08 | Flange | 1 |
| 10***95 | Tube | 1 |
| 11***60 | Lines Group-Water; -Bypass | 1 |
117-2783 Lines Gp-Water -Single Thermostat
| 11***56 | Housing & Regulator Group; -Engine Coolant Temperature | 1 |
| 11***83 | Lines Group-Water; -Single Thermostat | 1 |
| 11***97 | Gasket | 4 |
136-4890 Mounting Gp-Radiator
| 11***21 | Seal; (139cm) | 0 |
| 13***90 | Mounting Group-Radiator | 1 |
| 13***99 | Shroud As-Fan | 1 |
117-2789 Plug Gp-Water Lines
| 11***89 | Plug Group-Water Lines; -Engine Oil Cooler | 1 |
| 6V***27 | Seal-O-Ring (Id=8.92mm) | 1 |
| 8T***67 | Plug-Pipe; (Oil Cooler Bonnet Drain) | 1 |
153-8053 Pump Gp-Water
| 10***09 | Impeller; (Pump) | 1 |
| 10***10 | Gasket | 1 |
| 10***12 | Shaft; (Water Pump) | 1 |
117-2674 Pump Gp-Water
| 11***74 | Pump Group-Water | 1 |
| 15***53 | Pump Group-Water; (Water) | 1 |
| 6V***21 | Bolt; (M8x1.25x80-mm) | 2 |
176-7000 Pump Gp-Water
| 10***10 | Gasket | 1 |
| 14***88 | Seal As; (Water Pump) | 1 |
| 17***95 | Cover-Pump | 1 |
136-4895 Radiator Gp
| 13***84 | Tank Group-Coolant | 1 |
| 13***95 | Radiator Group | 1 |
| 13***70 | Channel As | 1 |
136-4886 Radiator Gp
| 13***84 | Tank Group-Coolant | 1 |
| 13***86 | Radiator Group | 1 |
| 13***70 | Channel As | 1 |
136-4884 Tank Gp-Coolant
| 13***84 | Tank Group-Coolant | 1 |
| 13***68 | Tank As-Radiator | 1 |
| 14***52 | Cap-Radiator | 1 |
Differential Steering System
9t-1823 Valve & Mounting Gp
| 1H***23 | Packing,Preformed Part Of Kit P/N 5r***25 | 4 |
| 4D***97 | Seal 15.6 mm(.614 In.) I.D. | 2 |
| 6D***53 | Pin (Spring) | 1 |
148-7024 Control Gp-Steering
| 13***62 | Valve Group-Steering | 1 |
| 13***54 | Hose As | 1 |
| 13***70 | Bracket As | 1 |
136-5515 Control Gp-Steering
| 13***15 | Control Group-Steering | 1 |
| 1F***50 | Nut Rops Support | 2 |
| 21***15 | Kit-Lever | 1 |
198-0885 Control Gp-Steering -Brake
| 14***83 | Rod End-Yoke | 2 |
| 14***84 | Pin | 2 |
| 15***40 | Pin-Cotter | 2 |
110-0256 Lines Gp-Pump
| 10***13 | Valve-Check; (Differential Back Pressure) | 1 |
| 11***52 | Tube As | 1 |
| 11***53 | Tube As | 1 |
198-0892 Lines Gp-Steering -Brake
| 14***80 | Clamp | 3 |
| 14***81 | Block | 3 |
| 15***35 | Clamp-Hose | 1 |
148-7254 Lines Gp-Steering
| 10***01 | Angle As | 1 |
| 10***17 | Hose As | 1 |
| 10***11 | Tee-O-Ring | 1 |
101-0858 Motor Gp-Piston
| 10***58 | Motor Group-Piston | 1 |
| 11***44 | Rotating Group-Motor | 1 |
| 11***50 | Housing | 1 |
159-7152 Motor Gp-Piston
| 11***50 | Housing | 1 |
| 11***62 | Head | 1 |
| 15***52 | Motor Group-Piston | 1 |
129-1658 Motor Gp-Piston -Steering
| 11***50 | Housing | 1 |
| 11***62 | Head | 1 |
| 12***58 | Motor Group-Piston; -Steering | 1 |
159-7151 Motor Gp-Piston -Steering
| 11***50 | Housing | 1 |
| 11***62 | Head | 1 |
| 15***51 | Motor Group-Piston; -Steering | 1 |
135-2853 Planetary Gp-Differential Ster
| 03***35 | Bolt-Self Locking; 2.22cm(.875 In.) Lg | 5 |
| 03***53 | Ring-Retaining | 2 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 8 |
136-4362 Pump & Mtg Gp-Steering
| 12***14 | Pump Group-Gear | 1 |
| 13***62 | Pump & Mtg Group-Steering | 1 |
| 15***28 | Pump Group-Piston | 1 |
121-7514 Pump Gp-Gear
| 12***14 | Pump Group-Gear | 1 |
| 13***51 | Plate-Gear | 1 |
| 13***52 | Flange As | 1 |
156-0928 Pump Gp-Piston
| 07***53 | Pin; (Spring) | 2 |
| 09***39 | Washer; (8.33x15x2.12-mm Thk) | 1 |
| 10***96 | Kit-Manifold | 1 |
198-0915 Pump Gp-Piston
| 07***53 | Pin; (Spring) | 2 |
| 09***39 | Washer; (8.33x15x2.12-mm Thk) | 1 |
| 10***96 | Kit-Manifold | 1 |
137-2670 Pump Gp-Steering
| 07***53 | Pin; (Spring) | 2 |
| 09***08 | Bolt-Socket Head; (M16x2x140-mm) | 4 |
| 09***39 | Washer; (8.33x15x2.12-mm Thk) | 1 |
111-7344 Rotating Gp-Motor
| 11***44 | Rotating Group-Motor | 1 |
| 11***46 | Valve Group-Flushing; -Differential Steering Motor | 1 |
| 11***84 | Shaft-Drive | 1 |
133-8738 Rotating Gp-Motor
| 11***84 | Shaft-Drive | 1 |
| 11***17 | Screw; (M6x1x16-mm) | 7 |
| 12***99 | Plate-Retaining | 1 |
166-7405 Rotating Gp-Motor
| 11***17 | Screw; (M6x1x16-mm) | 7 |
| 12***99 | Plate-Retaining | 1 |
| 13***40 | Valve Group-Flushing | 1 |
180-0458 Rotating Gp-Motor
| 11***46 | Valve Group-Flushing; -Differential Steering Motor | 1 |
| 11***87 | Barrel | 1 |
| 11***17 | Screw; (M6x1x16-mm) | 7 |
198-0872 Steering Ar -Brake
| 19***72 | Steering Ar; -Brake | 1 |
| 19***73 | Brake & Mtg Group-Service; -Brake Steering | 1 |
| 19***85 | Control Group-Steering; -Brake | 1 |
136-4373 Steering Ar-Hydraulic
| 11***64 | Motor & Mounting Group | 1 |
| 13***73 | Steering Ar-Hydraulic | 1 |
| 14***54 | Lines Group-Steering | 1 |
136-4371 Steering Ar-Standard
| 13***48 | Motor & Mounting Group; -Steering | 1 |
| 13***71 | Steering Ar-Standard | 1 |
| 14***54 | Lines Group-Steering | 1 |
161-1082 Valve Gp-Check
| 00***14 | Coupling-Pipe | 1 |
| 16***82 | Valve Group-Check | 1 |
| 16***38 | Valve-Check | 1 |
111-7346 Valve Gp-Flushing
| 11***46 | Valve Group-Flushing; -Differential Steering Motor | 1 |
| 11***88 | Plate | 1 |
| 11***89 | Rod | 1 |
133-8740 Valve Gp-Flushing
| 11***10 | Retainer | 2 |
| 13***40 | Valve Group-Flushing | 1 |
| 6E***02 | Spring | 2 |
135-7462 Valve Gp-Steering
| 09***19 | Ring-Retaining | 1 |
| 12***28 | Slug | 1 |
| 13***62 | Valve Group-Steering | 1 |
Drawbar, Three Point Hitch And Pto
7t-3000 Drive Gp-Power Take-Off
| 0L***58 | Bolt 8.26cm (3.25 In.) Long | 1 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 7 |
3w-5101 Shaft Gp-Power Take-Off
| 05***22 | Seal | 1 |
| 0S***84 | Cap Screw (2 1/4" Long) | 16 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
3w-5023 Frame Gp-Drawbar
| 12***42 | Plate-Wear | 1 |
| 3W***23 | Support Group-Drawbar | 1 |
| 3W***25 | Support As | 1 |
136-5410 Adapter Gp-3 Point Hitch
| 13***10 | Adapter Group-3 Point Hitch | 1 |
| 14***11 | Hose As | 1 |
| 15***46 | Valve Group-Shuttle; (Signal) | 1 |
113-7273 Adapter Gp-Power Take-Off
| 0S***73 | Bolt (102mm Long); (1/2-13x4-In) | 1 |
| 10***01 | Angle As | 1 |
| 11***73 | Adapter Group-Power Take-Off | 1 |
132-4654 Bracket Gp-Shipping
| 13***53 | Plate | 1 |
| 13***54 | Bracket Group-Shipping | 1 |
| 6S***24 | Plug-Protective | 8 |
146-4348 Coupler Gp
| 14***48 | Coupler Group | 1 |
| 14***49 | Body As | 2 |
| 14***50 | Seal | 2 |
104-3055 Coupler Gp-Quick
| 0S***26 | Bolt, Hex. Hd., 3/4in.-10 N.C. X 1 1/2in. | 1 |
| 10***55 | Coupler Group-Quick | 1 |
| 10***63 | Frame As-Coupler | 1 |
197-0486 Coupling Ar -Hydraulic Power Beyond
| 18***61 | Coupling Group | 1 |
| 19***86 | Coupling Ar; -Hydraulic Power Beyond | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 3 |
197-0485 Coupling Ar -Hydraulic Power Beyond
| 18***61 | Coupling Group | 1 |
| 19***85 | Coupling Ar; -Hydraulic Power Beyond | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 3 |
9u-1695 Drawbar Gp-Swinging
| 11***04 | Plate | 1 |
| 12***70 | Drawbar As | 1 |
| 13***29 | Retainer As | 1 |
136-5529 Hitch Ar
| 10***55 | Coupler Group-Quick | 1 |
| 11***08 | Hitch Group-3 Point | 1 |
| 12***03 | Kit-3-Point Hitch Valve | 1 |
157-3864 Hitch Ar
| 10***55 | Coupler Group-Quick | 1 |
| 11***08 | Hitch Group-3 Point | 1 |
| 13***07 | Sensor Group-Speed | 1 |
198-6814 Hitch Ar
| 18***55 | Guard Group-Belt | 1 |
| 19***14 | Hitch Ar | 1 |
| 8C***13 | Washer-Hard; (24x41.5x4-mm Thk) | 16 |
113-7308 Hitch Gp-3 Point
| 10***34 | Shaft As-Rocker Arm | 1 |
| 11***08 | Hitch Group-3 Point | 1 |
| 12***43 | Plate-Wear (Drawbar Support W/Hitch) | 1 |
157-3866 Hitch Ready Ar
| 13***54 | Bracket Group-Shipping | 1 |
| 13***10 | Adapter Group-3 Point Hitch | 1 |
| 13***75 | Guard Group-Rear | 1 |
161-9160 Hitch Ready Ar
| 13***54 | Bracket Group-Shipping | 1 |
| 13***07 | Sensor Group-Speed | 1 |
| 13***75 | Guard Group-Rear | 1 |
161-9159 Hitch Ready Ar
| 13***54 | Bracket Group-Shipping | 1 |
| 13***10 | Adapter Group-3 Point Hitch | 1 |
| 13***75 | Guard Group-Rear | 1 |
204-8062 Kit-3-Point Hitch
| 19***72 | Link Group-Upper | 1 |
| 19***17 | Pin As | 2 |
| 20***10 | Spacer; (17.5x25.4x12.5-mm Thk) | 2 |
124-4803 Kit-3-Point Hitch Valve
| 0S***08 | Bolt-Support To Starting Engine Timing Gear Housing | 3 |
| 10***97 | Cover | 1 |
| 10***89 | Manifold As | 1 |
154-1972 Kit-Power Take-Off
| 11***70 | Control Group-Power Take-Off | 1 |
| 11***71 | Mounting Group-Power Take-Off | 1 |
| 14***08 | Film-Instruction | 1 |
149-1457 Lines Gp-Power Take-Off
| 14***57 | Lines Group-Power Take-Off | 1 |
| 14***58 | Tube As | 1 |
| 15***84 | Hose As | 1 |
4e-7872 Link Gp
| 11***26 | Tube As | 1 |
| 11***27 | Hasp | 1 |
| 11***29 | Pin-Linch | 1 |
4e-7866 Link Gp
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 2 |
| 3W***02 | Pin | 1 |
| 4E***66 | Link Group | 1 |
210-7481 Link Gp-Upper
| 09***45 | Pin-Cotter | 2 |
| 0T***00 | Plug (.5625" Diameter) | 4 |
| 18***69 | Pin | 1 |
193-4472 Link Gp-Upper
| 09***45 | Pin-Cotter | 2 |
| 0T***00 | Plug (.5625" Diameter) | 2 |
| 18***69 | Pin | 1 |
113-7271 Mounting Gp-Power Take-Off
| 06***54 | Tubing | 1 |
| 10***73 | Support | 1 |
| 10***74 | Guard As | 1 |
139-8599 Power Take-Off Ar
| 11***70 | Control Group-Power Take-Off | 1 |
| 11***71 | Mounting Group-Power Take-Off | 1 |
| 13***53 | Transmission Ar; -With Power Take-Off | 1 |
147-9435 Power Take-Off Gp
| 13***12 | Case-Power Take-Off | 1 |
| 14***30 | Gear-Transfer; (20-Teeth) | 1 |
| 14***31 | Gear-Idler; (32-Teeth) | 1 |
211-7920 Shield Gp -Power Take-Off
| 17***45 | Film-Notice; (Rotating Drive Lines) | 2 |
| 19***04 | Shield As; (Italian Market) | 1 |
| 19***55 | Shield As; (Zuidberg Market) | 1 |
Electrical And Starting System
3e-7584 Lamp Gp-Head & Signal
| 10***46 | Lamp; (12-Volt, 4-Watt)(Miniature) | 1 |
| 10***47 | Body As-Lamp | 1 |
| 10***48 | Lens As; (Headlight)(High, Low Beam) | 1 |
3e-7585 Lamp Gp-Head & Signal
| 10***46 | Lamp; (12-Volt, 4-Watt)(Miniature) | 1 |
| 10***47 | Body As-Lamp | 1 |
| 10***49 | Lens As; (Headlight) | 1 |
225-1254 Alarm Gp
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 13***77 | Splice-Wire | 1 |
251-1134 Alarm Gp -Track Recoil
| 03***07 | Terminal-Ring; (0-Ga, 3/8-In Screw) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
125-9597 Alternator Gp-Charging
| 03***12 | Screw-Forming; (10-24x0.5-In) | 3 |
| 12***97 | Alternator Group-Charging; -12-Volt, 145-Ampere | 1 |
| 12***68 | Kit-Alternator Guard | 1 |
136-4564 Alternator Gp-Charging
| 12***97 | Alternator Group-Charging; -12-Volt, 145-Ampere | 1 |
| 13***64 | Alternator Group-Charging | 1 |
| 14***09 | Guard As-Alternator | 1 |
157-2731 Battery & Wiring Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***21 | Battery Group | 2 |
| 12***73 | Cap As-Filler; (Battery) | 6 |
124-2674 Connection Gp-Electrical
| 12***74 | Connection Group-Electrical; -Ground | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 1 |
| 6V***64 | Washer-Hard; (8.8x25.5x5-mm Thk) | 1 |
124-2673 Control & Mtg Gp-Engine Elek
| 11***55 | Control Group-Engine Electronic; (Engine Electronic) | 1 |
| 12***73 | Control & Mtg Group-Engine Elek; (Engine Elek) | 1 |
| 5P***70 | Nut-Hard; (M8 X 1.25) | 1 |
107-3578 Control Gp-Electronic
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 10***78 | Control Group-Electronic | 1 |
| 3E***88 | Receptacle As-Connector; (8-Pin) | 1 |
115-3055 Control Gp-Engine Electronic
| 11***55 | Control Group-Engine Electronic; (Engine Electronic) | 1 |
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
113-7270 Control Gp-Power Take-Off
| 11***70 | Control Group-Power Take-Off | 1 |
| 1P***16 | Seal-O-Ring; (11.63mm Id) | 1 |
| 2D***35 | Locknut (Visor To Bracket) | 1 |
117-2763 Harness As-Engine
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 4 |
| 11***63 | Harness As-Engine; -Electronic Control | 1 |
155-0044 Harness As-Radio -Adapter
| 15***44 | Harness As-Radio; -Adapter | 1 |
136-5589 Harness Gp-Chassis
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***89 | Harness Group-Chassis | 1 |
136-5576 Harness Gp-Console
| 11***90 | Fuse; (10 Amp) | 7 |
| 11***91 | Fuse; (15-Ampere) | 2 |
| 11***92 | Fuse; (20 Amp) | 3 |
136-5575 Harness Gp-Dash
| 11***90 | Fuse; (10 Amp) | 14 |
| 11***91 | Fuse; (15-Ampere) | 8 |
| 11***92 | Fuse; (20 Amp) | 5 |
154-7246 Heater Gp-Jacket Water
| 12***09 | Cord As-Heater Element; -240-Volt | 1 |
| 13***17 | Cap As-Dust | 1 |
| 15***81 | Element As-Jacket Water Heater; (240-Volt, 1250-Watt) | 1 |
131-8126 Heater Gp-Jacket Water
| 13***26 | Heater Group-Jacket Water; -120 Volt | 1 |
| 13***27 | Element As-Jacket Water Heater; (120-Volt, 1250-Watt) | 1 |
| 13***17 | Cap As-Dust | 1 |
128-4098 Kit-Connector
| 12***98 | Kit-Connector | 1 |
8t-8652 Kit-Implement Status Switch
| 1H***38 | Lockwasher, External Tooth (1/4); W/O Freespool Qty Is 6 | 2 |
| 3B***02 | Washer,Lock Circuit Breaker Uoc:Bsv,Bsx | 2 |
| 3T***48 | Clip Assembly - Housing Plug To Housing Recp. | 2 |
199-2797 Lamp Gp -Roading
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 19***97 | Lamp Group; -Roading | 1 |
155-0014 Lamp Gp -Turn/Marker
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***14 | Lamp Group; -Turn/Marker | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
3e-7301 Lamp Gp-Dome -With Switch
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 3E***01 | Lamp Group-Dome; -With Switch | 1 |
9x-9484 Lamp Gp-Flood -Roading Lights
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
| 8T***33 | Nut (M10x1.50 Thd) | 1 |
9x-7779 Lamp Gp-Flood -Roading Lights
| 10***51 | Screw; (M4x32-mm) | 4 |
| 10***52 | Seal | 1 |
| 10***53 | Lens As; (Floodlight) | 1 |
140-2719 Lamp Gp-Head
| 14***19 | Lamp Group-Head | 1 |
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
136-5402 Lamp Gp-Tail -Lh
| 13***02 | Lamp Group-Tail; -Lh | 1 |
| 16***76 | Lamp | 1 |
| 9W***26 | Lamp; (12-Volt, 21-Watt)(Roading Lights) | 2 |
136-5403 Lamp Gp-Tail -Rh
| 13***03 | Lamp Group-Tail; -Rh | 1 |
| 16***76 | Lamp | 1 |
| 9W***26 | Lamp; (12-Volt, 21-Watt)(Roading Lights) | 2 |
160-9941 Lamp Gp-Warning Beacon
| 12***78 | Washer; (16x38x5-mm Thk) | 2 |
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 2 |
| 16***41 | Lamp Group-Warning Beacon | 1 |
128-6985 Lamp Gp-Warning Beacon -Amber, Magnetic Mount, Rotating
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 9R***42 | Plug As | 1 |
| 9R***58 | Cord As | 1 |
199-7127 Lighting Gp -Roading
| 14***35 | Strap-Tie | 20 |
| 15***77 | Washer | 2 |
| 15***78 | Washer | 4 |
157-2727 Lighting Gp-Roading
| 15***27 | Lighting Group-Roading | 1 |
| 3E***85 | Lamp Group-Head & Turn | 2 |
| 7K***81 | Strap-Pressure & Return Hoses To | 2 |
157-2726 Lighting Gp-Roading
| 11***86 | Lamp; (12-Volt, 50-Watt) | 3 |
| 12***62 | Harness As; (Atch Lamps) | 4 |
| 13***02 | Lamp Group-Tail; -Lh | 1 |
204-4506 Lighting Gp-Roading
| 14***04 | Strap-Cable | 3 |
| 15***75 | Washer | 1 |
| 20***06 | Lighting Group-Roading | 1 |
157-2728 Lighting Gp-Roading
| 15***28 | Lighting Group-Roading | 1 |
| 3E***84 | Lamp Group-Head & Turn; -Rh | 2 |
| 7K***81 | Strap-Pressure & Return Hoses To | 2 |
136-5467 Lighting Gp-Warning
| 13***67 | Lighting Group-Warning | 1 |
| 5M***34 | Lamp; (12.8 Volt)(Stoplight-Outside) | 1 |
136-5466 Lighting Gp-Warning
| 13***66 | Lighting Group-Warning | 1 |
| 5M***34 | Lamp; (12.8 Volt)(Stoplight-Outside) | 1 |
146-3503 Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 09***30 | Screw-Machine; (M4x0.07x6-mm) | 1 |
136-5475 Sender Gp -Engine Oil Pressure
| 13***73 | Bracket As | 1 |
| 13***74 | Hose As | 1 |
| 13***75 | Sender Group; -Engine Oil Pressure | 1 |
9u-1707 Sensor & Mounting Gp
| 13***79 | Sensor Group-Speed; (Radar) | 1 |
| 18***47 | Spacer; (23mm Lg X 9.24 Id) | 4 |
| 5P***75 | Washer-Hard; (10.2x22.5x3-mm Thk)(Shield To A/C) | 3 |
113-7299 Sensor & Mounting Gp
| 11***99 | Sensor & Mounting Group | 1 |
| 13***75 | Sensor Group-Ground Speed | 1 |
| 18***47 | Spacer; (23mm Lg X 9.24 Id) | 4 |
131-5575 Sensor Gp-Ground Speed
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 13***75 | Sensor Group-Ground Speed | 1 |
| 3E***77 | Wedge-Receptacle Lock; (4-Pin) | 1 |
219-2384 Sensor Gp-Position
| 21***84 | Sensor Group-Position; (Rotary)(Engine Speed) | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
161-8906 Sensor Gp-Position
| 16***06 | Sensor Group-Position; -Accelerator Control | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
194-6722 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
| 19***22 | Sensor Group-Pressure; -Atmospheric Air | 1 |
136-5507 Sensor Gp-Speed
| 12***33 | Lever As | 1 |
| 12***34 | Rod | 1 |
| 13***07 | Sensor Group-Speed | 1 |
129-6628 Sensor Gp-Speed
| 10***13 | Seal; (3 Pin Plug) | 1 |
| 12***28 | Sensor Group-Speed; -Engine Speed/Timing | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
189-5746 Sensor Gp-Speed
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***36 | Pin-Connector; (14-Ga To 18-Ga) | 2 |
| 17***49 | Strap; (Marker) | 1 |
132-4579 Sensor Gp-Speed
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 13***79 | Sensor Group-Speed; (Radar) | 1 |
| 3E***77 | Wedge-Receptacle Lock; (4-Pin) | 1 |
7i-4108 Starting Aid Gp-Ether
| 10***73 | Tube | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***07 | Kit-Connecting Plug; (2-Pin)(Electronic Control) | 1 |
149-5538 Starting Motor Gp-Electric
| 14***03 | Motor Group-Electric | 1 |
| 14***38 | Starting Motor Group-Electric | 1 |
| 4H***69 | Gasket Starter Mtg Part Of Kit P/N 5r***25 | 1 |
207-1521 Starting Motor Gp-Electric
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 09***30 | Screw-Machine; (M4x0.07x6-mm) | 1 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 1 |
136-5555 Wiring Gp-Cab
| 03***83 | Screw-Machine | 20 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 2 |
150-8768 Wiring Gp-Electronic Control
| 10***40 | Sensor Group-Temperature; -Output Transfer Gear Oil | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***08 | Kit; (Connecting Plug) (3 Pin) (Includes Plug As And Wedge) | 1 |
136-5579 Wiring Gp-Machine
| 03***06 | Terminal-Ring; (00-Ga, 1/4-In Screw) | 1 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 10***80 | Switch As-Pressure; (Engine Oil) | 1 |
198-0902 Wiring Gp-Steering -Brake
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 14***35 | Strap-Tie | 10 |
| 15***65 | Grommet | 1 |
117-2760 Wiring Gp-Unit Injector
| 11***60 | Wiring Group-Unit Injector | 1 |
| 2V***16 | Clip; (9.52mm Id) | 4 |
| 4P***37 | Harness Assembly-Wiring; (Unit Injector) | 1 |
Engine Arrangement
160-8565 Engine Ar-Complete
| 10***96 | Flywheel Group | 1 |
| 11***85 | Cover Group-Cylinder Block | 1 |
| 11***90 | Cooler Group-Engine Oil; (Engine Oil) | 1 |
160-8564 Engine Ar-Core
| 11***82 | Cylinder Block Group | 1 |
| 11***06 | Housing Group-Front; (Front) | 1 |
| 11***82 | Camshaft Group | 1 |
136-5093 Installation Ar-Engine
| 13***58 | Pulley Group-Alternator | 1 |
| 13***99 | Air Cleaner Group | 1 |
| 13***94 | Extension Group-Air Cleaner | 1 |
164-5543 Installation Ar-Engine
| 12***15 | Mounting Group-Fan Drive | 1 |
| 13***62 | Drive Group-Fan | 1 |
| 13***81 | Cooling Group-Supplemental | 1 |
136-5105 Installation Ar-Engine
| 12***15 | Mounting Group-Fan Drive | 1 |
| 13***26 | Heater Group-Jacket Water; -120 Volt | 1 |
| 13***52 | Filter Group-Water Sep & Fuel | 1 |
Frame And Body
141-8887 Bracket Gp
| 14***87 | Bracket Group | 1 |
| 15***55 | Bracket As | 1 |
| 8C***57 | Bolt (3/4-10x2.75in); (3/4-10x2.75-In) | 8 |
155-0388 Counterweight Gp
| 15***55 | Plate | 2 |
| 15***88 | Counterweight Group | 1 |
| 5P***35 | Bolt-Plt; (3/4unc X 8) | 2 |
141-7215 Counterweight Gp
| 10***18 | Rod | 4 |
| 10***20 | Plate | 2 |
| 11***17 | Plate | 2 |
138-7250 Counterweight Gp
| 10***18 | Rod | 4 |
| 10***20 | Plate | 2 |
| 11***17 | Plate | 2 |
141-8880 Counterweight Gp-Rear
| 14***80 | Counterweight Group-Rear | 1 |
| 14***07 | Plate | 13 |
| 14***08 | Plate | 2 |
157-2717 Fender Gp
| 10***36 | Shim; (175mm Lg) | 3 |
| 12***98 | Shim; (230mm Lg) | 1 |
| 13***22 | Plate; (Rh) | 1 |
161-2742 Frame Gp
| 03***35 | Bolt-Self Locking; 2.22cm(.875 In.) Lg | 1 |
| 0S***73 | Bolt (102mm Long); (1/2-13x4-In) | 5 |
| 13***28 | Shield | 2 |
157-2730 Guard Gp
| 15***47 | Trim-Hand Hold | 2 |
| 15***30 | Guard Group | 1 |
| 16***55 | Cover As | 1 |
188-8655 Guard Gp-Belt
| 18***91 | Guard As-Belt; (Center) | 1 |
| 18***55 | Guard Group-Belt | 1 |
| 18***56 | Guard As-Belt; (Rh) | 1 |
136-6075 Guard Gp-Rear
| 13***68 | Guard As | 1 |
| 13***75 | Guard Group-Rear | 1 |
| 16***89 | Bracket As | 1 |
157-2738 Guard Gp-Spectator
| 15***38 | Guard Group-Spectator | 1 |
| 16***71 | Guard As | 1 |
| 8C***36 | Bolt (1/2-13x1.375in); (1/2-13x1.375-In) | 4 |
198-4797 Handrail Gp
| 15***20 | Bolt | 2 |
| 15***88 | Washer; (10.5-mm) | 8 |
| 17***54 | U-Bolt | 1 |
157-3858 Handrail Gp
| 11***03 | Bumper | 1 |
| 15***91 | Handhold As | 1 |
| 15***58 | Handrail Group | 1 |
153-2798 Hood & Guard Gp
| 03***26 | Retainer | 2 |
| 10***36 | Marker-Hood | 1 |
| 11***80 | Latch As | 2 |
161-2108 Mounting Gp-Registration -Rear
| 15***86 | Lamp As; (License) | 2 |
| 16***44 | Bracket As | 1 |
| 16***08 | Mounting Group-Registration; -Rear | 1 |
158-1547 Mounting Gp-Registration -Front
| 15***45 | Plate As | 1 |
| 15***47 | Mounting Group-Registration; -Front | 1 |
| 4L***54 | Capscrew; (3/8-16x21 In) (Gd8) (Hex Hd) (4-Roller) | 4 |
156-6086 Mounting Gp-Tank
| 13***44 | Strap As | 2 |
| 13***45 | Plate | 1 |
| 13***47 | Spacer; (104-mm Lgx31.75 Dia) | 4 |
192-3960 Plate Gp-Skid
| 15***80 | Washer | 8 |
| 19***60 | Plate Group-Skid | 1 |
| 19***61 | Plate As | 2 |
178-6903 Plate Gp-Warning
| 15***60 | Locknut; (M8) | 12 |
| 15***82 | Washer | 8 |
| 17***07 | Plate-Warning | 1 |
178-6901 Plate Gp-Warning
| 14***26 | Clip | 1 |
| 15***60 | Locknut; (M8) | 23 |
| 15***76 | Washer; (Contact) | 4 |
173-8303 Reflector Gp
| 14***71 | Reflector, Ring, Ring; Sealing Ring | 6 |
| 14***73 | Reflector; (Red) | 4 |
| 15***56 | Rivet | 10 |
136-6069 Step Gp
| 12***57 | Step As | 1 |
| 13***69 | Step Group | 1 |
| 13***47 | Handrail As | 1 |
184-3026 Warning Gp-Slow Moving Vehicle
| 13***67 | Bracket As | 1 |
| 18***26 | Warning Group-Slow Moving Vehicle | 1 |
| 4M***81 | Capscrew; (Hex Hd 1/4-20x3/4) (Use W/Spacer 2) | 3 |
Fuel System
136-4885 Condenser & Mtg Gp-Fuel Cooler
| 10***82 | Latch As-Enclosure | 2 |
| 13***85 | Condenser & Mtg Group-Fuel Cooler | 1 |
| 13***03 | Condenser & Fuel Group | 1 |
136-5508 Control Gp-Governor
| 10***93 | Housing | 1 |
| 13***13 | Plate | 1 |
| 13***43 | Pedal As | 1 |
174-3365 Cover Gp-Decelerator
| 15***76 | Washer; (Contact) | 2 |
| 15***77 | Washer | 2 |
| 15***92 | Bolt; (M10x130mm) | 1 |
116-5436 Filter Gp-Fuel
| 11***36 | Filter Group-Fuel; -Secondary | 1 |
| 1R***62 | Filter As-Fuel; (Advanced Efficiency)(Secondary) | 1 |
159-1801 Filter Gp-Water Sep & Fuel
| 13***71 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 15***22 | Bracket As | 1 |
| 15***01 | Filter Group-Water Sep & Fuel | 1 |
133-5671 Filter Gp-Water Sep & Fuel
| 12***75 | Bowl As-Water Collection; (Water Separator, Fuel Filter) | 1 |
| 13***71 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 13***73 | Element; (Filter) (Fuel/Water Separator) (Primary) | 1 |
136-4552 Filter Gp-Water Sep & Fuel
| 13***71 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 13***52 | Filter Group-Water Sep & Fuel | 1 |
| 1S***94 | Clip-R.H. Side Engine Support | 2 |
116-5434 Fitting Gp-Fuel Lines
| 11***34 | Fitting Group-Fuel Lines | 1 |
| 11***35 | Connector | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
117-0183 Fitting Gp-Fuel Lines
| 11***83 | Fitting Group-Fuel Supply; (Supply)(Supply) | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 9X***50 | Connector-O-Ring; (O-Ring Port) | 1 |
136-6063 Lines Gp-Fuel
| 12***09 | Valve-Ball; (Hydraulic Tank Drain) | 1 |
| 13***12 | Hose (Fuel) | 1 |
| 13***38 | Hose (Fuel) | 1 |
116-5400 Lines Gp-Fuel Injection
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 1 |
| 10***06 | Valve-Regulator; (Fuel Lines) | 1 |
| 10***29 | Spring | 1 |
136-5521 Mounting Gp-Control
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***36 | Plug As-Code; (For 924f Only) | 1 |
| 12***31 | Control Group-3 Point Hitch | 1 |
116-5428 Pump & Mtg Gp-Fuel Transfer
| 09***70 | Washer-Sealing | 2 |
| 11***17 | Tube As; (Fuel Supply) | 1 |
| 11***28 | Pump & Mtg Group-Fuel Transfer; (Fuel Transfer) | 1 |
116-5415 Pump Gp-Fuel Injection
| 11***15 | Pump Group-Fuel Injection | 1 |
| 11***84 | Seal-O-Ring; (32.99mm Id) | 1 |
| 15***01 | Bolt; (8x1.25x7-mm)(M8x1.25x70mm) | 1 |
116-5411 Pump Gp-Fuel Priming -Hand
| 11***11 | Pump Group-Fuel Priming; -Hand | 1 |
| 13***41 | Pump Group-Fuel Priming; (Hand) | 1 |
| 1P***36 | Gasket; (Fuel Priming Pump)(Fuel Priming Pump) | 1 |
9p-7121 Strainer-Fuel -Tank
| 9P***21 | Strainer-Fuel; (Fuel Tank) | 1 |
148-3583 Tank Gp-Fuel
| 00***90 | Elbow | 1 |
| 10***09 | Cap As-Filler; (Fast Fill Fuel) | 1 |
| 13***42 | Tank-Fuel; (Lh) | 1 |
233-6742 Valve Gp-Check -Fuel
| 23***42 | Valve Group-Check; -Fuel Filter | 1 |
| 23***96 | Valve Group-Check; -Fuel Filter | 1 |
| 6V***89 | Seal-O-Ring (Id=19.18mm) | 1 |
281-2725 Valve Gp-Check -Fuel
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 28***25 | Valve Group-Check; -Fuel | 1 |
| 6V***23 | Ring; (Backup) (13.16mm Id) | 1 |
238-0296 Valve Gp-Check -Fuel
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 23***96 | Valve Group-Check; -Fuel Filter | 1 |
| 6V***23 | Ring; (Backup) (13.16mm Id) | 1 |
Hydraulic System
9t-9517 Cylinder Gp-Lift
| 16***95 | Seal As-Buffer | 1 |
| 16***04 | Seal-U-Cup | 1 |
| 16***57 | Seal-Wiper | 1 |
151-4998 Valve Gp-Control
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 2 |
| 12***76 | Seat As-Shuttle | 1 |
| 12***96 | Valve Group-Check; (Primary Resolver) | 1 |
9t-1799 Valve Gp-Control
| 10***15 | Valve Group-Solenoid | 1 |
| 2K***98 | Seal-O-Ring | 2 |
| 2K***99 | Seal-Interface Between Inlet Manifold | 2 |
180-1651 Valve Gp-Control -Trailer Brakes
| 15***77 | Washer | 2 |
| 17***05 | Connector As; (Quick) | 1 |
| 17***06 | Connector As; (Quick) | 1 |
180-1650 Valve Gp-Control -Trailer Brakes
| 14***84 | Ball Joint | 1 |
| 15***52 | Seal-O-Ring | 1 |
| 15***71 | Bolt | 2 |
173-6971 Valve Gp-Control
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 2 |
| 12***76 | Seat As-Shuttle | 1 |
| 12***96 | Valve Group-Check; (Primary Resolver) | 1 |
9t-1819 Valve Gp-Relief
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 4K***88 | Seal; Adapter To Oil Pump Outlet Manifold | 1 |
| 4T***43 | Valve | 1 |
186-0961 Coupling Gp
| 15***78 | Washer | 2 |
| 17***39 | Coupling Group | 1 |
| 18***13 | Bolt | 1 |
152-4216 Detent Gp-Control Valve
| 10***71 | Housing | 1 |
| 15***16 | Detent Group-Control Valve | 1 |
| 22***54 | Plug-Orifice | 1 |
136-4360 Filter & Mtg Gp-Hydraulic
| 13***60 | Filter Group-Oil; -Steering | 1 |
| 13***61 | Filter Group-Oil; -Transmission | 1 |
| 13***60 | Filter & Mtg Group-Hydraulic | 1 |
136-0460 Filter Gp-Oil -Steering
| 13***60 | Filter Group-Oil; -Steering | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
136-0461 Filter Gp-Oil -Transmission
| 13***61 | Filter Group-Oil; -Transmission | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 9S***91 | Plug,Machine Thread Fuel Injection Pump | 1 |
147-8342 Filter Gp-Oil -Implement
| 10***53 | Filter-Oil; (Advanced Efficiency) | 1 |
| 13***14 | Filter As-Hydraulic; (Steering)(Fire Resistant Fluid) | 1 |
| 14***42 | Filter Group-Oil; -Implement | 1 |
136-4358 Hydraulic Ar
| 13***58 | Hydraulic Ar | 1 |
| 13***60 | Filter & Mtg Group-Hydraulic | 1 |
| 13***62 | Pump & Mtg Group-Steering | 1 |
145-9564 Lines Gp-Hydraulic
| 10***45 | Hose As | 2 |
| 10***51 | Bracket | 1 |
| 10***52 | Bracket | 1 |
161-6399 Lines Gp-Hydraulic
| 10***05 | Tee-O-Ring | 2 |
| 11***94 | Hose As | 1 |
| 11***99 | Hose As | 1 |
161-9012 Lines Gp-Hydraulic
| 12***83 | Tube As | 1 |
| 14***11 | Hose As | 1 |
| 14***51 | Hose As | 1 |
145-9544 Lines Gp-Hydraulic
| 13***54 | Hose As | 1 |
| 14***44 | Lines Group-Hydraulic | 1 |
| 14***48 | Coupler Group | 4 |
148-7006 Lines Gp-Hydraulic
| 10***05 | Tee-O-Ring | 2 |
| 11***94 | Hose As | 1 |
| 11***99 | Hose As | 1 |
139-1261 Lines Gp-Hydraulic
| 13***54 | Hose As | 1 |
| 13***61 | Lines Group-Hydraulic | 1 |
| 14***48 | Coupler Group | 4 |
206-8812 Lines Gp-Hydraulic Drain -Motor With 3 Point Hitch
| 14***97 | Plate | 1 |
| 14***62 | Clamp | 1 |
| 14***04 | Strap-Cable | 2 |
206-8813 Lines Gp-Hydraulic Drain -Motor Without 3 Point Hitch
| 14***04 | Strap-Cable | 2 |
| 15***77 | Washer | 1 |
| 18***55 | Bolt | 1 |
113-7264 Motor & Mounting Gp
| 11***64 | Motor & Mounting Group | 1 |
| 15***52 | Motor Group-Piston | 1 |
| 4K***75 | Bolt-12 Point Head 38.1mm (1.501in) Long | 4 |
130-8448 Motor & Mounting Gp -Steering
| 13***48 | Motor & Mounting Group; -Steering | 1 |
| 15***51 | Motor Group-Piston; -Steering | 1 |
| 4K***75 | Bolt-12 Point Head 38.1mm (1.501in) Long | 4 |
148-0891 Mounting Gp-Valve
| 10***18 | Housing, Angle As | 1 |
| 10***72 | Angle As | 1 |
| 14***03 | Bracket As | 1 |
136-4394 Pump & Mtg Gp-Hydraulic
| 13***94 | Pump & Mtg Group-Hydraulic | 1 |
| 15***44 | Pump Group-Piston; -Hydraulic | 1 |
| 15***22 | Pump Group-Piston | 1 |
156-8044 Pump Gp-Piston -Hydraulic
| 00***69 | Cup-Roller Bearing | 1 |
| 00***71 | Cone-Bearing | 1 |
| 00***14 | Ring-Retaining; (Internal) | 1 |
158-0522 Pump Gp-Piston
| 08***19 | Pin | 1 |
| 10***85 | Bolt-Socket Head | 4 |
| 11***01 | Seal (Rear Pump To Center Pump) | 1 |
145-8830 Rotating Gp-Pump
| 00***55 | Ring-Retaining | 1 |
| 14***24 | Piston As-Pump | 9 |
| 14***27 | Barrel-Cylinder | 1 |
264-5143 Rotating Gp-Pump
| 16***78 | Bearing-Spherical | 1 |
| 16***79 | Pin | 3 |
| 16***80 | Barrel-Cylinder | 1 |
136-6073 Tank Gp-Hydraulic
| 13***73 | Tank Group-Hydraulic | 1 |
| 13***58 | Tank As-Hydraulic | 1 |
| 13***42 | Gauge-Sight | 1 |
203-6043 Valve & Lines Gp-Load Control -Implement Load Control
| 12***84 | Ring-Backup | 1 |
| 12***85 | Ring-Backup | 1 |
| 14***27 | Bolt-Hex Head; (3/8-16x2.5 In) | 1 |
8j-6875 Valve Gp-Shuttle
| 2M***80 | Seal--To Connector Pump Outlet | 2 |
| 4B***84 | Ball | 1 |
| 4T***05 | Adapter | 2 |
112-4544 Valve Gp-Bank
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 4 |
| 11***27 | Valve Group-Selector & Press Cont | 1 |
| 11***30 | Valve Group-Pressure Control | 1 |
173-6969 Valve Gp-Bank
| 10***18 | Cover-End | 1 |
| 10***62 | Cover-Inlet | 1 |
| 17***69 | Valve Group-Bank | 1 |
152-2137 Valve Gp-Bank 4
| 10***89 | Manifold As | 1 |
| 10***62 | Cover-Inlet | 1 |
| 15***98 | Valve Group-Control | 4 |
152-2136 Valve Gp-Bank 4
| 10***18 | Cover-End | 1 |
| 10***62 | Cover-Inlet | 1 |
| 15***98 | Valve Group-Control | 4 |
173-6970 Valve Gp-Bank 4
| 10***89 | Manifold As | 1 |
| 10***62 | Cover-Inlet | 1 |
| 17***70 | Valve Group-Bank 4 | 1 |
152-2138 Valve Gp-Bank 5
| 10***97 | Cover | 1 |
| 15***37 | Valve Group-Bank 4 | 1 |
| 15***38 | Valve Group-Bank 5 | 1 |
173-6972 Valve Gp-Bank 5
| 10***97 | Cover | 1 |
| 17***70 | Valve Group-Bank 4 | 1 |
| 17***72 | Valve Group-Bank 5 | 1 |
4t-4273 Valve Gp-Breaker Relief
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
| 4T***45 | Valve-Breaker Relief | 1 |
| 4T***73 | Valve Group-Breaker Relief | 1 |
173-2075 Valve Gp-Diverter
| 17***75 | Valve Group-Diverter | 1 |
| 17***34 | Plug-Orifice | 2 |
| 17***35 | Spring | 1 |
168-2210 Valve Gp-Pump Control -Pressure, Flow Compensator
| 03***43 | Seal-O-Ring | 1 |
| 10***45 | Valve-Orifice; (Hydraulic Oil Check) | 1 |
| 16***10 | Valve Group-Pump Control; -Pressure, Flow Compensator-Hydraulic Oil Clg Fan Piston Pump | 1 |
6e-6568 Valve Gp-Pump Control
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 03***36 | Seal-O-Ring | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 3 |
152-2646 Valve Gp-Shuttle
| 12***98 | Seat | 1 |
| 12***99 | Seat | 1 |
| 13***49 | Connector | 1 |
100-3915 Valve Gp-Solenoid
| 09***33 | Bolt-Socket Head; (M5x0.8x20-mm) | 8 |
| 10***15 | Valve Group-Solenoid | 1 |
| 10***16 | Solenoid As-Bidirectional | 1 |
Lubrication System
122-0725 Base Gp-Oil Filter -Engine
| 11***45 | Valve-Pump Bypass; (Engine Oil Filter) | 1 |
| 12***25 | Base Group-Oil Filter; -Engine | 1 |
| 12***26 | Base As; (Oil Filter) | 1 |
166-1329 Base Gp-Oil Filter -Engine
| 11***45 | Valve-Pump Bypass; (Engine Oil Filter) | 1 |
| 16***28 | Base Assem. | 1 |
| 16***29 | Base Group-Oil Filter; -Engine | 1 |
117-2786 Cover Gp-Oil Filter Base -Engine
| 11***86 | Cover Group-Oil Filter Base; -Engine | 1 |
| 5S***34 | Seal-O-Ring; (97.79mm Id) | 1 |
| 7C***42 | Cover; (Filter Base) | 1 |
143-2655 Filler Gp-Engine Oil
| 03***49 | Nut-Self Lock; (No.10.Unc) | 1 |
| 06***08 | . Bolt; Socket, Clamp-Tubing | 1 |
| 12***81 | Seal-Integral; (Air Compressor Mounting) | 1 |
117-2751 Filter Gp-Engine Oil
| 11***51 | Filter Group-Engine Oil | 1 |
| 13***45 | Bolt-Hex Head; (M10x1.50x30) | 6 |
| 16***29 | Base Group-Oil Filter; -Engine | 1 |
123-0783 Valve Gp-Fluid Sampling
| 12***83 | Fitting Group-Fuel Lines; -Fuel | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 6V***52 | Cap-Dust; (Fuel Supply Tee Connection) | 1 |
154-6835 Fumes Disposal Gp
| 12***46 | Hose-Fumes Disposal | 1 |
| 15***35 | Fumes Disposal Group | 1 |
| 2S***53 | Clip; (34.92mm Id) | 1 |
143-2656 Gauge Gp-Oil Level (Dipstick) -Engine
| 12***19 | Gauge As-Oil Level (Dipstick) | 1 |
| 14***54 | Tube As-Gauge Guide | 1 |
| 14***56 | Gauge Group-Oil Level (Dipstick); -Engine | 1 |
129-2855 Lines Gp-Turbocharger Oil
| 11***87 | Seal-O-Ring (23.16 mm Id) | 1 |
| 11***42 | Adapter | 1 |
| 12***55 | Lines Group-Turbocharger Oil | 1 |
233-5220 Pump Gp-Engine Oil
| 23***20 | Pump Group-Engine Oil | 1 |
| 6D***46 | Seal-O-Ring (Id=101.27mm) | 1 |
| 6V***17 | Bolt; (M8x1.25x30-mm)(Location Z) | 4 |
117-2746 Pump Gp-Engine Oil
| 06***61 | Seal-O-Ring (Id=40.87mm) | 1 |
| 11***03 | Tube Assem. | 1 |
| 11***46 | Pump Group-Engine Oil | 1 |
138-2535 Valve Gp-Fluid Sampling -Engine Oil
| 13***35 | Valve Group-Fluid Sampling; -Engine Oil | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
| 5P***17 | Adapter- To Logic Valve 1u***59 | 1 |
Machine Arrangement
157-2715 Base Common Ar
| 13***58 | Hydraulic Ar | 1 |
| 13***63 | Power Train Ar | 1 |
| 15***15 | Base Common Ar | 1 |
157-2709 Base Unit Ar
| 11***56 | Lines Group-Pump | 1 |
| 13***53 | Planetary Group-Differential Ster | 1 |
| 13***93 | Installation Ar-Engine | 1 |
199-5521 Certification Ar
| 19***72 | Steering Ar; -Brake | 1 |
| 19***21 | Certification Ar | 1 |
| 19***27 | Lighting Group; -Roading | 1 |
157-3857 Certification Ar
| 10***95 | Visor Group-Cab | 1 |
| 13***80 | Support-Speaker | 1 |
| 13***39 | Speaker Group-Radio | 1 |
157-3856 Chassis Ar
| 13***35 | Lines Group-Air Conditioner | 1 |
| 13***90 | Washer Group-Window | 1 |
| 13***79 | Wiring Group-Machine | 1 |
157-2719 Configuration Ar
| 10***95 | Visor Group-Cab | 1 |
| 13***80 | Support-Speaker | 1 |
| 13***39 | Speaker Group-Radio | 1 |
157-3847 Special Ar-Standard
| 13***71 | Steering Ar-Standard | 1 |
| 13***86 | Radiator Group | 1 |
| 13***05 | Plate & Film Group | 1 |
157-3863 Special Ar-Without Hitch
| 13***10 | Adapter Group-3 Point Hitch | 1 |
| 13***75 | Guard Group-Rear | 1 |
| 14***44 | Lines Group-Hydraulic | 1 |
139-8597 Special Ar-Without Pto
| 11***73 | Adapter Group-Power Take-Off | 1 |
| 13***52 | Transmission Ar; -Without Power Take-Off | 1 |
| 13***97 | Special Ar-Without Power Take-Off | 1 |
Operator Station
139-0719 Air Conditioner Gp
| 03***26 | Retainer | 1 |
| 03***38 | Clamp | 2 |
| 10***43 | Plate-Orifice | 2 |
136-5500 Cab Gp
| 09***55 | Clip | 2 |
| 11***60 | Bumper-Rubber | 35 |
| 12***07 | Button As | 4 |
157-3868 Cab Gp
| 13***00 | Cab Group | 1 |
| 13***08 | Control Group-Governor | 1 |
| 13***10 | Control Group-Transmission | 1 |
157-3867 Cab Gp
| 13***00 | Cab Group | 1 |
| 13***08 | Control Group-Governor | 1 |
| 13***10 | Control Group-Transmission | 1 |
136-5113 Compressor Gp-Refrigerant
| 11***13 | Guard As | 1 |
| 13***13 | Compressor Group-Refrigerant | 1 |
| 15***77 | Bolt-Hex Head; (M12x1.75x140mm) | 2 |
3e-1908 Compressor Gp-Refrigerant
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 2 |
| 31***18 | Valve As-Pressure Relief; (Refrigerant Compressor) | 1 |
136-5512 Control Gp-Hydraulic Hand
| 13***47 | Lever | 1 |
| 13***48 | Lever | 1 |
| 13***49 | Lever | 1 |
171-2090 Control Gp-Monitor -English/German
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***31 | Kit-Bracket & Cover; -Cat Id Display | 1 |
| 17***88 | Control Group-Display Eprom; (Cat Id-English, German) | 1 |
171-2089 Control Gp-Monitor -English/Spanish
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***31 | Kit-Bracket & Cover; -Cat Id Display | 1 |
| 17***87 | Control Group-Display Eprom; (Cat Id-English, Spanish) | 0 |
136-5510 Control Gp-Transmission
| 03***17 | Bolt-Self Locking; (1/4-20x.88in) | 2 |
| 12***45 | Handhold | 1 |
| 12***46 | Gate | 1 |
136-5519 Cover Gp-Dash
| 13***66 | Insulation-Dash | 1 |
| 13***48 | Cover-Dash | 1 |
| 13***19 | Cover Group-Dash | 1 |
188-2928 Display Gp-Cat Id -English/Spanish
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***31 | Kit-Bracket & Cover; -Cat Id Display | 1 |
| 17***87 | Control Group-Display Eprom; (Cat Id-English, Spanish) | 0 |
136-5292 Door Gp-Cab
| 11***49 | Handle As | 1 |
| 13***14 | Hinge As | 1 |
| 13***69 | Frame As-Door | 1 |
136-5520 Duct & Control Gp
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 4 |
| 13***18 | Duct | 1 |
| 13***20 | Duct & Control Group | 1 |
136-5222 Frame Gp-Window -Rear
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 09***53 | Washer, Tooth | 2 |
| 13***09 | Frame As | 1 |
108-4229 Horn Gp-Electric
| 10***29 | Horn Group-Electric | 1 |
| 10***75 | Horn As | 1 |
| 5T***04 | Wire Assem. | 2 |
136-5513 Installation Gp-Cab
| 10***25 | Screw-Machine; (8-32x1-In) | 16 |
| 10***02 | Bracket | 1 |
| 13***14 | Speaker As | 2 |
157-3851 Installation Gp-Cab
| 03***38 | Screw; (6-32x1.0in) | 2 |
| 03***12 | Screw-Forming; (10-24x0.5-In) | 2 |
| 03***17 | Bolt-Self Locking; (1/4-20x.88in) | 1 |
136-5581 Kit-Radio
| 13***40 | Radio Group | 1 |
| 13***81 | Kit-Radio | 1 |
136-5582 Kit-Radio
| 10***82 | Sleeve | 1 |
| 13***90 | Bushing; (Radio Mount) | 1 |
| 13***91 | Harness As-Radio | 1 |
136-5328 Liner As-Cab
| 10***25 | Screw-Machine; (8-32x1-In) | 8 |
| 10***01 | Nut-Clip | 21 |
| 13***28 | Liner As-Cab | 1 |
136-4935 Lines Gp-Air Conditioner
| 13***06 | Hose | 1 |
| 13***07 | Hose | 1 |
| 13***08 | Tube | 1 |
173-1411 Mirror Gp-Rear View
| 16***55 | Mirror As | 2 |
| 16***57 | Arm As-Rh | 1 |
| 17***21 | Mirror As; (Standard) | 2 |
201-8336 Mirror Gp-Rear View
| 14***71 | Switch As-Rocker; (14-Volt, Sealed, Illuminated)(Heated Mirrors) | 1 |
| 14***04 | Actuator-Rocker | 1 |
| 14***49 | Switch; (12-Volt)(Electric Mirror Adjustment) | 1 |
204-4479 Mirror Gp-Rear View
| 14***71 | Switch As-Rocker; (14-Volt, Sealed, Illuminated)(Heated Mirrors) | 1 |
| 14***04 | Actuator-Rocker | 1 |
| 14***49 | Switch; (12-Volt)(Electric Mirror Adjustment) | 1 |
204-4478 Mirror Gp-Rear View
| 14***71 | Switch As-Rocker; (14-Volt, Sealed, Illuminated)(Heated Mirrors) | 1 |
| 14***04 | Actuator-Rocker | 1 |
| 14***49 | Switch; (12-Volt)(Electric Mirror Adjustment) | 1 |
164-1959 Mirror Gp-Rear View
| 16***55 | Mirror As | 1 |
| 16***57 | Arm As-Rh | 1 |
| 16***58 | Arm As-Lh | 1 |
204-4480 Mirror Gp-Rear View
| 14***71 | Switch As-Rocker; (14-Volt, Sealed, Illuminated)(Heated Mirrors) | 1 |
| 14***04 | Actuator-Rocker | 1 |
| 14***49 | Switch; (12-Volt)(Electric Mirror Adjustment) | 1 |
136-5587 Monitor Ar-Machine Performance
| 11***99 | Sensor & Mounting Group | 1 |
| 13***87 | Monitor Ar-Machine Performance | 1 |
| 14***30 | Control Group-Machine Performance | 1 |
136-5586 Monitor Ar-Machine Performance
| 13***86 | Monitor Ar-Machine Performance | 1 |
| 14***31 | Control Group-Monitor Electronic | 1 |
| 9U***07 | Sensor & Mounting Group | 1 |
208-8085 Mounting Gp-Fire Extinguisher
| 15***60 | Locknut; (M8) | 2 |
| 15***76 | Washer; (Contact) | 2 |
| 18***46 | Fire Extinguisher | 1 |
208-8087 Mounting Gp-Fire Extinguisher
| 15***60 | Locknut; (M8) | 2 |
| 15***76 | Washer; (Contact) | 2 |
| 18***48 | Fire Extinguisher | 1 |
208-8084 Mounting Gp-Fire Extinguisher
| 15***60 | Locknut; (M8) | 2 |
| 15***76 | Washer; (Contact) | 2 |
| 18***45 | Fire Extinguisher | 1 |
208-8086 Mounting Gp-Fire Extinguisher
| 15***60 | Locknut; (M8) | 2 |
| 15***76 | Washer; (Contact) | 2 |
| 18***47 | Fire Extinguisher | 1 |
208-8083 Mounting Gp-Fire Extinguisher
| 15***60 | Locknut; (M8) | 2 |
| 15***76 | Washer; (Contact) | 2 |
| 18***44 | Fire Extinguisher | 1 |
164-3993 Mounting Gp-Mirror & Beacon
| 12***78 | Washer; (16x38x5-mm Thk) | 2 |
| 16***83 | Mount As | 1 |
| 16***93 | Mounting Group-Mirror & Beacon | 1 |
136-5518 Panel Gp-Instrument
| 12***07 | Panel As | 1 |
| 13***36 | Film-Dash | 1 |
| 13***37 | Panel As | 1 |
136-5543 Player Gp-Compact Disc
| 13***99 | Harness As | 1 |
| 13***48 | Harness As | 1 |
| 13***43 | Player Group-Compact Disc | 1 |
136-5542 Radio Gp
| 10***82 | Sleeve | 1 |
| 13***90 | Bushing; (Radio Mount) | 1 |
| 13***42 | Radio Group | 1 |
136-5540 Radio Gp
| 10***82 | Sleeve | 1 |
| 13***90 | Bushing; (Radio Mount) | 1 |
| 13***40 | Radio Group | 1 |
136-5583 Radio Gp
| 13***99 | Harness As | 1 |
| 13***48 | Harness As | 1 |
| 13***43 | Player Group-Compact Disc | 1 |
142-9806 Roof Gp-Cab
| 12***78 | Washer; (16x38x5-mm Thk) | 4 |
| 14***06 | Roof Group-Cab | 1 |
| 15***33 | Screw-Washer Hd | 6 |
136-5411 Seat Gp
| 11***20 | Kit-Wiring Harness Service | 1 |
| 11***21 | Kit-Air Spring | 1 |
| 11***22 | Absorber As-Shock | 1 |
136-5360 Seat Gp-Companion
| 13***53 | Seat Belt As | 1 |
| 13***59 | Support As | 1 |
| 13***60 | Seat Group-Companion | 1 |
161-4411 Seat Gp-Suspension
| 11***28 | Bracket As | 1 |
| 13***11 | Seat Group | 1 |
| 16***10 | Spacer | 2 |
136-5539 Speaker Gp-Radio
| 13***33 | Speaker As | 2 |
| 13***39 | Knob | 1 |
| 13***80 | Support-Speaker | 1 |
150-9222 Support Gp-Monitor
| 15***59 | Bracket | 1 |
| 15***60 | Support | 2 |
| 15***22 | Support Group-Monitor | 1 |
105-4895 Visor Gp-Cab
| 09***14 | Spacer | 1 |
| 10***95 | Visor Group-Cab | 1 |
| 11***83 | Bracket | 1 |
104-5687 Voltmeter Gp
| 10***87 | Voltmeter Group; (12-Volt) | 1 |
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 2 |
| 4B***43 | Nut,Plain,Hexagon Plate Mtg | 2 |
136-5390 Washer Gp-Window
| 10***19 | Pump As-Washer | 2 |
| 12***18 | Seal; (1000-cm) | 0 |
| 13***90 | Washer Group-Window | 1 |
136-5516 Wiper Gp-Window
| 13***94 | Nozzle As-Washer | 1 |
| 13***44 | Bracket; (Front) | 1 |
| 13***76 | Arm As | 2 |
Power Train
9w-0342 Actuator Gp-Rotary
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 9 |
| 1B***14 | Cap Screw--Pipe To Carburetor | 2 |
| 2H***65 | Pin (Spring) | 1 |
136-1042 Drive Gp-Pump -Steering
| 13***40 | Gear; (39 Teeth) | 1 |
| 13***42 | Drive Group-Pump; -Steering | 1 |
| 2S***29 | Ball Bearing | 1 |
7t-3443 Drive Gp-Pump
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 4 |
| 1A***60 | Capscrew, Hex Head (1/2 - 13 X 2 G5); (Hex Head) (1/2-13x2 Gd 8 Z) | 3 |
| 1S***82 | Coupling | 1 |
7t-7990 Pump Gp-Gear
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 2 |
| 1H***96 | Packing,Preformed Cartridge Part Of Kit P/N 4j***80 | 1 |
| 2K***57 | Seal-O-Ring (148.82mm Id) | 1 |
7t-7953 Pump Gp-Gear
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 4 |
| 15***73 | Body As-Oil Pump | 1 |
3w-5032 Support Gp-Transmission
| 1D***15 | Bolt 139.70 mm(5.50 In.) Long | 4 |
| 1P***51 | Plug-Seal | 3 |
| 2J***06 | Nut Front Support To Frame; Nut-Front Support To Frame | 2 |
8y-1293 Universal Joint Gp
| 0S***04 | Bolt (1/2-20x2.5in); (1/2-20x2.5-In) | 8 |
| 13***97 | Seal | 0 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
6t-4739 Valve Gp-Modulating
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 3 |
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 2 |
| 1P***66 | Cover | 1 |
6y-0185 Valve Gp-Modulating
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 2 |
| 1S***36 | Retainer | 1 |
| 2D***42 | Ball 6.35 mm(.25 In.)Diameter | 1 |
9w-0664 Valve Gp-Modulating
| 6T***39 | Valve Group-Modulating | 1 |
| 8M***35 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
| 8M***43 | Seal (1.734" Inside Diameter) | 1 |
149-6332 Case & Parts Gp-Planetary -Without Power Take-Off
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 10 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
149-6334 Case & Parts Gp-Planetary -With Power Take-Off
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 10 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
9n-4504 Clutch Gp
| 05***94 | Bolt-12 Point Head; (3/8-16x1.75-In) | 24 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 12 |
| 12***36 | Race-Bearing; Bearing-Race | 1 |
136-1049 Clutch Gp
| 0L***58 | Bolt 8.26cm (3.25 In.) Long | 1 |
| 13***94 | Gear; (36-Teeth) | 1 |
| 13***16 | Hub-Clutch | 2 |
140-1315 Control Gp-Transmission Hyd
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 1 |
| 11***44 | Valve Group-Bank | 1 |
149-6335 Cover Gp-Shipping -With Power Take-Off
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
149-6337 Cover Gp-Shipping -Without Power Take-Off
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 8 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
136-6074 Filler Gp-Power Train Oil
| 06***97 | Cap-Oil Filler; (Engine Oil) | 1 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 6 |
| 10***37 | Cap-Breather | 1 |
138-4274 Final Drive Gp
| 03***35 | Bolt-Self Locking; 2.22cm(.875 In.) Lg | 8 |
| 13***71 | Case-Final Drive | 2 |
| 13***73 | Retainer | 2 |
113-9800 Lines Gp-Filter -Transmission
| 11***95 | Hose As | 1 |
| 11***97 | Hose As | 1 |
| 11***00 | Lines Group-Filter; -Transmission | 1 |
136-4898 Lines Gp-Power Train Oil
| 13***98 | Lines Group-Power Train Oil | 1 |
| 13***22 | Hose As | 1 |
| 14***90 | Hose As | 1 |
6y-1242 Planetary Gp-Transmission
| 00***41 | Ring | 1 |
| 0L***58 | Bolt 8.26cm (3.25 In.) Long | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
136-4363 Power Train Ar
| 10***06 | Shaft Group-Input | 1 |
| 10***61 | Shaft Group-Drive | 1 |
| 10***30 | Suspension Group-Bogie | 1 |
103-8861 Shaft Gp-Drive
| 0L***58 | Bolt 8.26cm (3.25 In.) Long | 1 |
| 0S***84 | Cap Screw (2 1/4" Long) | 8 |
| 10***59 | Retainer | 1 |
8e-5141 Shaft Gp-Input
| 13***19 | Bearing-Roller (Inner) | 1 |
| 14***10 | Bearing As | 1 |
| 2A***96 | Plug-Cup | 1 |
102-0406 Shaft Gp-Input
| 0S***84 | Cap Screw (2 1/4" Long) | 8 |
| 10***06 | Shaft Group-Input | 1 |
| 10***07 | Universal Joint Group | 1 |
136-1053 Transmission Ar -With Power Take-Off
| 13***42 | Drive Group-Pump; -Steering | 1 |
| 13***49 | Clutch Group | 1 |
| 13***53 | Transmission Ar; -With Power Take-Off | 1 |
136-1052 Transmission Ar -Without Power Take-Off
| 13***42 | Drive Group-Pump; -Steering | 1 |
| 13***49 | Clutch Group | 1 |
| 13***52 | Transmission Ar; -Without Power Take-Off | 1 |
112-4530 Valve Gp-Pressure Control
| 11***30 | Valve Group-Pressure Control | 1 |
| 16***79 | Body-Load Piston | 8 |
| 1S***36 | Retainer | 1 |
139-5834 Valve Gp-Relief
| 13***33 | Body-Valve | 1 |
| 13***34 | Valve Group-Relief | 1 |
| 14***41 | Spool As | 1 |
103-5460 Valve Gp-Relief
| 10***60 | Valve Group-Relief | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 4B***84 | Ball | 1 |
156-5797 Valve Gp-Relief
| 15***97 | Valve Group-Relief | 1 |
| 15***98 | Valve Group-Relief | 1 |
112-4527 Valve Gp-Selector & Press Cont
| 11***25 | Spool As-Rotary | 1 |
| 11***27 | Valve Group-Selector & Press Cont | 1 |
| 1B***75 | Bolt (" " " ); Bolt ( " " " ) | 3 |
134-0783 Wheel Gp-Drive -Slotted Cast
| 10***67 | Wheel-Slotted Drive | 2 |
| 13***78 | Guard As | 2 |
| 13***83 | Wheel Group-Drive; -Slotted Cast | 1 |
136-7628 Wheel Gp-Drive -Rubber
| 13***78 | Guard As | 2 |
| 13***28 | Wheel Group-Drive; -Rubber | 1 |
| 14***35 | Plate-Wear | 2 |
Service Equipment And Supplies
191-5989 Chock Gp-Wheel
| 15***59 | Chock-Wheel | 1 |
| 15***30 | Bracket | 1 |
| 15***77 | Washer | 6 |
173-8685 Chock Gp-Wheel
| 15***59 | Chock-Wheel | 1 |
| 15***30 | Bracket | 1 |
| 15***77 | Washer | 7 |
163-0411 Conversion Gp-Certification -Transmission
| 14***03 | Film | 3 |
| 15***59 | Spool-Selector | 1 |
| 16***11 | Conversion Group-Certification; -Transmission | 1 |
156-8183 Film Gp
| 15***40 | Film; (65e-Lh) | 1 |
| 15***41 | Film; (65e-Rh) | 1 |
| 15***83 | Film Group | 1 |
136-5605 Plate & Film Gp
| 10***40 | Film-Warning; (Elec Shock Hazard, Unit Inj) | 4 |
| 13***05 | Plate & Film Group | 1 |
| 13***12 | Plate-Warning-Rops/Fops | 1 |
156-8182 Plate & Film Gp
| 10***30 | Film; (Warning) (Accumulator Pressure) (On Bracket Covering Brake Accumulator) | 1 |
| 11***01 | Film-Identification; (Auxiliary, Main Circuit Bkr), . Tube; Cyl. Ass'Y | 1 |
| 11***93 | Plate; (Instruction) (On Right Side Behind Cab Door) | 1 |
190-2955 Plate & Film Gp
| 10***46 | Film-Warning; (Elec Shock Hazard, Unit Inj) | 2 |
| 13***83 | Film-Warning | 2 |
| 13***84 | Film-Notice | 1 |
136-5601 Plate & Film Gp
| 10***97 | Film-Notice | 1 |
| 13***85 | Plate-Warning-Rops/Fops | 1 |
| 13***01 | Plate & Film Group | 1 |
Undercarriage
136-4364 Axle Gp-Front
| 10***50 | Spindle | 2 |
| 10***37 | Hub-Idler Wheel | 2 |
| 10***73 | Cap Group-Hub | 2 |
1r-1146 Track Gp-Rubber
| 11***54 | Shim-Tapered; (0.4-Deg)(7.09mm Thk) | 2 |
| 11***56 | Shim-Tapered; (0.6-Deg)(7.39mm Thk) | 2 |
| 1R***03 | Track-Rubber; (Belt) | 1 |
1r-1142 Track Gp-Rubber
| 11***54 | Shim-Tapered; (0.4-Deg)(7.09mm Thk) | 2 |
| 11***56 | Shim-Tapered; (0.6-Deg)(7.39mm Thk) | 2 |
| 1R***75 | Track-Rubber; (Belt) | 2 |
1r-0902 Track Gp-Rubber
| 11***54 | Shim-Tapered; (0.4-Deg)(7.09mm Thk) | 2 |
| 11***56 | Shim-Tapered; (0.6-Deg)(7.39mm Thk) | 2 |
| 1R***02 | Belt Ar | 1 |
1r-1140 Track Gp-Rubber
| 11***54 | Shim-Tapered; (0.4-Deg)(7.09mm Thk) | 2 |
| 11***56 | Shim-Tapered; (0.6-Deg)(7.39mm Thk) | 2 |
| 1R***97 | Track-Rubber | 2 |
1r-1143 Track Gp-Rubber
| 11***54 | Shim-Tapered; (0.4-Deg)(7.09mm Thk) | 2 |
| 11***56 | Shim-Tapered; (0.6-Deg)(7.39mm Thk) | 2 |
| 1R***76 | Track-Rubber; (Belt) | 2 |
1r-1145 Track Gp-Rubber
| 11***54 | Shim-Tapered; (0.4-Deg)(7.09mm Thk) | 2 |
| 11***56 | Shim-Tapered; (0.6-Deg)(7.39mm Thk) | 2 |
| 1R***01 | Track-Rubber; (Belt) | 1 |
1r-1190 Track Gp-Rubber
| 11***54 | Shim-Tapered; (0.4-Deg)(7.09mm Thk) | 2 |
| 11***56 | Shim-Tapered; (0.6-Deg)(7.39mm Thk) | 2 |
| 1R***87 | Track-Rubber | 2 |
1r-1141 Track Gp-Rubber
| 11***54 | Shim-Tapered; (0.4-Deg)(7.09mm Thk) | 2 |
| 11***56 | Shim-Tapered; (0.6-Deg)(7.39mm Thk) | 2 |
| 1R***98 | Belt 626 mm (25") Wide | 2 |
145-9567 Belt Tensioner Gp
| 13***81 | Pin As | 4 |
| 14***67 | Belt Tensioner Group | 1 |
| 14***31 | Cylinder Group-Belt Tensioner | 2 |
120-9131 Control Gp-3 Point Hitch
| 12***31 | Control Group-3 Point Hitch | 1 |
| 13***48 | Lever | 1 |
| 16***06 | Sensor Group-Position; -Accelerator Control | 1 |
148-3031 Cylinder Gp-Belt Tensioner
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 10 |
| 10***45 | Plate | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
1r-1139 Idler Gp
| 1R***39 | Idler Group | 1 |
| 1R***46 | Wheel As-Idler | 4 |
198-6816 Scraper Gp-Drum
| 14***81 | Spacer; (13.5x25x12-mm Thk) | 8 |
| 15***53 | Plate | 2 |
| 15***54 | Plate-Wear | 4 |
105-8661 Support Gp-Suspension
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 6 |
| 0S***25 | Bolt, Hex. Hd., 5/8"-11 N.C. X 2 1/2" | 24 |
| 10***19 | Retainer-Inner | 1 |
104-8030 Suspension Gp-Bogie
| 05***03 | Washer; (40.46x69.85x7.37-mm Thk) | 16 |
| 09***11 | Plate | 2 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 96 |
173-7261 Track Gp-Rubber
| 11***52 | Shim-Tapered; (0.2-Deg) | 2 |
| 11***58 | Shim-Tapered; (0.8-Deg) | 2 |
| 17***61 | Track Group-Rubber | 1 |
178-7421 Track Gp-Rubber
| 11***52 | Shim-Tapered; (0.2-Deg) | 2 |
| 11***58 | Shim-Tapered; (0.8-Deg) | 2 |
| 17***21 | Track Group-Rubber | 1 |
202-1014 Track Gp-Rubber
| 11***52 | Shim-Tapered; (0.2-Deg) | 2 |
| 11***58 | Shim-Tapered; (0.8-Deg) | 2 |
| 1R***55 | Track-Rubber | 2 |
152-0815 Track Gp-Rubber
| 11***52 | Shim-Tapered; (0.2-Deg) | 2 |
| 11***58 | Shim-Tapered; (0.8-Deg) | 2 |
| 15***15 | Track Group-Rubber | 1 |
183-8411 Track Gp-Rubber
| 18***11 | Track Group-Rubber | 1 |
| 1R***35 | Track-Rubber | 2 |
65E serial number reference
The PIN/serial plate on a 65E is riveted to the main frame on the right-hand side, typically near the front frame rail below the cab/fuel tank area, with a duplicate engine serial tag on the block; check your operation and maintenance manual's PIN-location page for the exact spot on your unit. The plate reads as a 3-character alphanumeric prefix (e.g. 6GS, 1GM) followed by a 5-digit sequence number - the prefix ties the machine to its specific engine build (3176C for 6GS, 3176 for 1GM) and to the correct parts/service manual set, while the digits are the individual unit count within that build.
| Prefix | Identifies | Notes |
|---|---|---|
| 6GS | Challenger 65E agricultural tractor, 3176C engine build | Serial range 6GS00001-UP. Caterpillar's factory parts catalog lists this range as the Challenger 65E agricultural tractor powered by the 3176C engine. Associated with the start of 65E production, around 1997 - confirm exact model year with your dealer. |
| 1GM | Challenger 65E agricultural tractor, 3176 engine build | Serial range 1GM00001-UP. Caterpillar's factory parts catalog lists this range as the Challenger 65E agricultural tractor powered by the base 3176 (non-C) engine. Falls within the 1998-2001 production window reported for the 65E - confirm exact model year with your dealer. |
Frequently asked questions
What engine does the Caterpillar 65E Challenger use?
A Cat 3176C turbocharged, aftercooled 10.3 L (629 ci) inline six-cylinder diesel, rated near 310 hp (231 kW) gross at 2100 rpm with a 16:1 compression ratio.
What is the operating weight of the Caterpillar 65E?
Roughly 15,510 kg (34,195 lb). Actual weight varies by ballast, track width, and attached implements, so treat this as a baseline rather than a fixed figure.
What replaced the Caterpillar 65E Challenger?
Caterpillar did not build a direct in-house successor. It sold its Challenger track-tractor line to AGCO in 2002 and closed the DeKalb, Illinois plant. AGCO continued the same rubber-track architecture under the Challenger nameplate as the MT700 and MT800 series, which effectively carried the lineage forward.
What 65E owners discuss
What engine is under the hood of a 65E, and what should I watch for at high hours?
The 65E runs Caterpillar's 3176 non-ACERT inline-six, 10.3 L (629 cu in), turbocharged diesel, with sources rating it in the 304-310 hp (227-231 kW) range (figures vary by gross vs net rating). It's regarded as a proven ag engine, but at high hours owners flag turbo shaft play showing up as lost boost, injector wear producing rough idle or smoke, and coolant loss tied to head gasket seepage on machines that ran hot at some point. None of that is unique to this chassis - they're generic 3176 wear points - so pull an oil and coolant sample and check boost before budgeting for a rebuild.
Owners keep mentioning a 'flip-flop valve' - what is it and why does it fail?
It's the diverter valve that swaps steering-oil routing between forward and reverse travel, triggered by pilot oil off the reverse clutch. Internal leakage is the common failure mode: oil bleeds from the steering circuit into the transmission case over time, with owners reporting it showing up around 2,000 hours of use. The result is a steering reservoir that runs low while the transmission case looks and runs overfull and warm, even though the transmission oil itself isn't the thing overheating. If you see that pattern - low steering reservoir, warm trans case, sluggish or uneven turning - have your dealer pressure-test the diverter valve and steering circuit before the machine goes back to work; steering response on a tracked machine this size is safety-critical.
What undercarriage and track wear patterns are typical on this platform?
Belt (Mobil-Trac) tension is the biggest single lever on undercarriage life across the 65-series lineage. Run it too tight and bushing, sprocket, idler, and roller wear all accelerate, with the idlers taking the worst of it. Run it too loose and you get drive-wheel slip and belt edge walk. Bogie wheel and front idler oil seals are the leak point owners flag first, so check oil level and seal condition at both during any walk-around. Bogie (air bag) pressure also affects steering feel and how evenly the belt wears front to rear, so keep it balanced and in spec.
Are the brakes on a 65E as troublesome as on the early Challenger 65?
The stuck or seized-brake complaints on this platform trace mostly back to the original 65 and 65B. Later C, D, and E-series machines carried undercarriage and drivetrain refinements - Timken bearings running in oil, solid front idlers in place of the earlier air-filled ones - that owners credit with cutting down on the failures common to the earliest units. That said, a 65E on the used market today has plenty of hours on its brake components regardless of series. Confirm free, even application on both sides during a test drive, and have your dealer inspect the brake pack and actuation circuit before relying on it - this is a safety-critical system and worth the verification.
What electrical or sensor quirks come up in owner discussions?
Reported electrical gremlins tend to be intermittent fault codes rather than one dominant failure - one owner had a PTO-related code trigger on a tractor that wasn't even PTO-equipped, which points to a harness connector or ground issue rather than a real component fault. Because the electronic transmission and engine controls on these tractors share connectors and grounds across multiple sensors, a single corroded pin or bad ground can throw a code that looks unrelated to the actual problem. Plan on a dealer scan-tool session rather than chasing individual sensors blind.
What about hydraulic hose and coupler failures owners report?
Complaints center more on the field-connect couplers than on hoses blowing out mid-run. More than one owner traced repeat leaks to worn male tips on the hose ends rather than the hose itself, and fitting fresh coupler ends resolved it where replacing the hose alone did not. Treat the couplers as a wear item on their own, separate from hose condition.
What should I check before buying a used 65E?
Pull the service history through Cat using the serial and engine number to flag chronic issues before you look at the machine in person. On the walk-around: pull the final drive plugs and check the oil for metal, a warning sign for bull gear wear; check driveshaft U-joints for slack or stiffness that can chew up seals; inspect the rubber damper between engine and transmission for cracking; check bogie wheel and front idler oil level and seals for leaks; look at the rear drive wheel rubber for separation from the steel band, which is an expensive repair; inspect belt lugs and guide blocks for separation; take it to road speed and listen and smell for a belt running out of alignment; confirm bogie air pressure is even side to side; and check the exhaust stack and muffler mounting, a known weak point. Machines with 12,000-15,000-plus hours on record aren't unusual if maintenance was kept current, so hour count by itself shouldn't be a dealbreaker - condition and paperwork matter more.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 65E part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.