Caterpillarforest productsforwarder
Caterpillar 574
Maintenance schedule, common problems & OEM parts breakdown
The Cat 574 is an 8-wheel-drive forest products forwarder, a self-propelled log carrier that picks up cut timber with a rear-mounted knuckleboom crane and hauls it out of the block on its own wood bunk rather than dragging it like a skidder. Two distinct engine generations run under the 574 name: earlier machines, built roughly 1999-2003 under the 1FM serial prefix, use the Cat 3126 diesel; later and current-production units use the Cat C6.6 ACERT, a Tier 3 application. Both are rated near 173 hp (129 kW) gross, and operating weight runs 16.8-17.2 t (37,000-38,000 lb) depending on build and source. The 574 sits mid-pack in Cat's forwarder range, between the smaller 564 and the larger 584/584HD, and is offered in 6WD and 8WD chassis form with a standard wood-log bunk or an optional clam-shell bunk, standard or oversize tires, and an optional bogie-track/front-axle-lift package for soft ground.
What changed across the two generations is the driveline, not the basic layout. The 3126-era 574 pairs a hydrostatic/mechanical transmission with electric power shift, while the C6.6 ACERT-era machine runs a torque-converter power-shift transmission under IQAN electronic control, with wet disc axle and parking brakes replacing the earlier setup. Crane reach, hydraulic pump flow, reservoir size, and load capacity carried over largely unchanged across the update. In the used and parts market, that split matters more than the model number: buyers and parts counters need to confirm which engine and transmission generation is actually fitted before ordering filters, injectors, or driveline components, since the two generations do not share service parts. Demand stays steady because the platform is simple and well proven in the logging fleets that run it, and it shares its diesel families, the 3116/3126/C7/C9 lineage on one side and C6.6 ACERT on the other, with a wide base of other Cat equipment.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 574 specifications
Engine
| Engine model (early series) | Cat 3126 DITA, turbocharged direct-injection diesel — used on early-production 574 forwarders (approx. 1999-2003 build range, serial prefix 1FM) |
| Engine model (current series) | Cat C6.6 ACERT — shared with the 564 forwarder in the current lineup; electronic common-rail with ACERT emissions control |
| Cylinders / configuration | Inline-6, 4-stroke-cycle diesel, turbocharged aftercooled |
| Gross power | 173 hp (129 kW) |
| Net power | 154.3 hp (115 kW) @ 2200 rpm |
| Peak torque | 555 lb-ft (752.5 Nm) @ 1600 rpm |
| Displacement | Published on most forwarder spec sheets as 7.2 L (439 cu in), matching the earlier 3126 DITA; the C6.6 ACERT engine family itself is nominally rated at 6.6 L (403 cu in). Treat displacement as varying by source/series and confirm against the engine serial plate. |
| Emissions tier | Tier 3 (parts/service literature identifies the 574 as a Tier 3 forwarder); the C6.6 ACERT engine family more broadly is also offered at Tier 4 Interim/Stage IIIB equivalent ratings depending on application — confirm tier against the specific engine arrangement number |
Weights
| Operating weight (8WD configuration) | 37,000-38,000 lb (16,783-17,237 kg) — figure varies slightly by source/spec-sheet revision |
| Gross machine weight reference | 35,274 lb (16,000 kg) — listed on some spec sheets as "gross (loaded) machine weight"; this figure is lower than published operating weight, so treat the two weight figures as measuring different reference points (unloaded vs. rated) and verify against the specific spec sheet before quoting |
| Load weight / payload (8WD) | 30,800-32,000 lb (13,971-14,525 kg) |
| Load capacity with clam bunk | 26,000 lb (11,793 kg) |
| Ground pressure | Not published on available spec sheets for this model |
| Shipping weight | Not separately published; only operating/gross weight figures are documented for this class |
Dimensions
| Transport length | 30.71-30.80 ft (9.36-9.39 m) |
| Width over tires | 9.29-9.30 ft (2.83 m) |
| Height to top of crane | 12.11 ft (3.69 m) |
| Ground clearance | 2.14 ft (650 mm) |
| Bunk area length | 17.72 ft (5.4 m) per undercarriage-pad figures; wood bunk length is separately listed at 222 in (5,639 mm) on current dealer sheets — the two figures measure different reference lines, so confirm which is needed |
| Bunk area width | 9.29 ft (2.83 m) |
| Wheelbase / track gauge | Not published on available spec sheets for this model |
Performance
| Maximum transmission speed | 15.5 mph (25 km/h) |
| Maximum travel speed, 6WD mode | 14.5 mph (23.3-23.4 km/h) |
| Maximum working travel speed | 8.1 mph (13.0-13.1 km/h) |
| Transmission | Early series: hydrostatic/mechanical, 3 forward/3 reverse. Current series: electric power shift, 4 forward/4 reverse |
| Crane type | F71/F73 loader crane |
| Crane maximum reach | 22.9-23.5 ft (6.9-7.16 m) |
| Crane gross lift torque | 16,875 lb-ft (22,879 Nm) |
| Load/payload capacity | 32,000 lb (14,525 kg) standard bunk; 26,000 lb (11,793 kg) with clam bunk |
| Gradeability / drawbar pull | Not published on available spec sheets for this model |
Service capacities (summary)
| Fuel tank | Documented at two different capacities depending on source/series: 33.1 gal (125 L) on older-series spec sheets, 47 gal (178 L) on current dealer/product sheets — varies by configuration/series |
| Hydraulic system reservoir | 32 gal (121 L) |
| Hydraulic pump flow rate | 66 gal/min (250 L/min) |
| Engine oil capacity | Not published in available spec sheets — confirm against the engine service manual for the specific arrangement number |
| Cooling system capacity | Not published in available spec sheets — machine uses a hydraulic-oil cooler with thermal bypass per product literature, but coolant fill volume is not documented for this model |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
574 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | Not published in available factory documentation for this machine. Early 1FM-prefix 574 forwarders run the Cat 3126 DITA diesel; the later 554/574 forwarder lineup runs the Cat C6.6 ACERT rated 129 kW (173 hp). Crankcase refill volume differs between the two engine families — confirm exact figure against the OMM for the specific serial prefix before service. | Cat DEO (Diesel Engine Oil), graded by ambient temperature per Cat's standard multigrade chart — heavier grades such as 15W-40 for warm climates, lighter cold-weather grades (10W-30 or synthetic 0W-40) where startup temperatures run low. |
| Cooling system | Not published in available factory documentation for either the 3126-powered or C6.6 ACERT-powered 574 series. Confirm with the OMM or a dealer for the exact radiator/engine pairing on the serial number in question. | Cat ELC (Extended Life Coolant), premixed to the standard Cat glycol/water ratio used across Cat diesel engines; supplement per the OMM's coolant service schedule. |
| Fuel tank | 125 L (33.1 US gal) on the earlier 1FM-prefix, 3126-powered series. 178 L (47 US gal) on the later C6.6 ACERT-powered 554/574 forwarder series per the factory spec sheet. Varies by series/build — confirm against the machine's serial prefix. | Diesel fuel per Cat's standard fuel specification; use winter-blend or additive per ambient temperature as noted in the OMM's cold-weather operation section. |
| Transmission / power shift | Not published in available documentation. The 574 uses an electric power-shift transmission (4 forward/4 reverse) with a torque-converter power train; oil volume for this compartment is not listed in any spec sheet reviewed. Confirm with OMM or dealer. | Cat TDTO (Transmission/Drive Train Oil), with a cold-weather or TDTO-TMS multigrade option for low ambient starting temperatures per the OMM's viscosity chart. |
| Final drives / axles (front and rear) | Not published in available documentation. The 574, 8-wheel configuration uses NAF Bogie (HD) axles front and rear (the 6-wheel 564 sibling instead uses a Funk 1200 front axle — not applicable to the 574). Oil fill volume per bogie/axle housing is not listed in any source reviewed; confirm with OMM or dealer. | Cat TDTO or Cat FDAO (Final Drive Axle Oil), matched to the axle manufacturer's viscosity spec and ambient-temperature guidance in the OMM. |
| Hydraulic system and tank | 121 L (32 US gal) reservoir capacity, consistent across the factory spec sheet and dealer equipment listings for the C6.6 ACERT-powered 554/574 series. System runs a variable-displacement, load-sensing piston pump (100 cc) rated at 250 L/min (66 US gpm) flow at 2200 rpm, feeding closed-center proportional control valves with a thermal-bypass oil cooler. Reservoir figure for the earlier 3126-powered series not confirmed. | Cat HYDO Advanced hydraulic oil, viscosity selected by ambient operating temperature per the OMM's climate chart (lighter grade for cold starts, heavier for sustained high-temperature operation). |
| Grease (spec only) | No fill capacity — service-interval application to pin, bushing, boom, and swing-bearing grease points per the OMM's lubrication chart. | Cat Multipurpose Grease for general chassis and boom pin points; Cat Extreme Application grease where high-load or high-temperature swing/pivot points call for it. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 574 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 6,000 h |
|
Servicing the 574 beyond the schedule
Predictive Maintenance & Fluid Analysis
Run S·O·S oil sampling on engine, hydraulic, and axle oil at every scheduled interval. HEUI injector wear on both the 3126 and C6.6 ACERT shows up first as rough idle or gradual power loss, not sudden failure. Pull ECM fault history (Cat ET on 1FM-prefix machines, the IQAN alarm log on later machines) before chasing a mechanical cause, since the ACERT governor can derate on a sensor fault alone. Listen for hydraulic pump whine at operating temperature, an early sign of cavitation or wear in the 66 gpm circuit.
Corrective & Common Repairs
Boom base pivot pins and cylinder pin/bushing joints wear fastest on the F71/F73 crane; check for bore elongation, not just visible play. Grapple rotator and detent solenoid wiring fails at the boom hinge flex point from repeated cycling, so check connectors and coil resistance before swapping the solenoid. Radiator and oil cooler fins pack solid with bark and needles in forestry duty and trigger nuisance overheat faults if not cleared daily. Mismatched tires, chains, or band tracks across the eight bogie wheels accelerate bearing wear; keep all eight matched.
Overhaul & Rebuild Points
High-hour bogie axle bearings and wet disc brake packs are the major rebuild items on the running gear. Crane slew/rotator bearing and boom pin-and-bushing joints need a full rebuild once bore elongation exceeds factory tolerance, a load-bearing safety item, not a convenience repair. The hydraulic piston pump and motors warrant teardown once flow or pressure falls off under load. Transmission overhaul differs by generation: hydrostatic drive components on 1FM-prefix machines, torque-converter power-shift clutch packs and seals on C6.6 ACERT machines. Check turbocharger shaft play at the same interval.
Seasonal & Environment Servicing
Switch to a winter fuel blend and confirm block-heater use before cold starts; both the 3126 and C6.6 ACERT suffer hard starting below their rated ambient range. Match hydraulic oil viscosity to season per the OMM's climate chart; the load-sensing 66 gpm circuit is sensitive to cold, thick oil. Clear bark, sawdust, and needle buildup from the radiator and oil cooler daily in dry logging conditions. In wet or muddy ground, grease crane and bogie pivots more often; water washes lubricant from the pins faster than usual.
574 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 112-6523 | Insert-Fuel Filter | Fuel system service | Check fitment → |
| 117-4089 | Element-Water Separator | Fuel system service | Check fitment → |
| 146-6695 | Filter Element-Fuel | Fuel system service | Check fitment → |
| 152-7217 | Filter Element As-Air | Air intake service | Check fitment → |
| 152-7219 | Filter Element As-Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
574 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| CID 0100 - FMI 01 | Engine oil pressure reading low for current engine rpm; engine ECM flags oil pressure below the normal operating range. | Low engine oil level, plugged oil filter, worn oil pump, or a faulty oil pressure sensor/wiring. | Shut down and check oil level first. Verify sensor wiring and connector before condemning the pump. Do not continue running the engine on a genuine low-pressure reading. |
| CID 0110 - FMI 00 | Engine coolant temperature above the normal operating range, an actual overheat condition rather than a sensor fault. | Low coolant level, plugged radiator core (common with sawdust and chaff buildup on forestry duty), slipping fan clutch, or a failed water pump. | Idle down and let the engine cool before opening the cooling system. Clear debris from radiator and oil cooler fins, check coolant level and fan drive, then confirm the sensor once the cooling fault is ruled out. |
| CID 0110 - FMI 03 | Coolant temperature sensor signal reads above the valid range; the ECM sees an open circuit or a short to battery voltage on the sensor wiring rather than an actual temperature. | Corroded or damaged sensor connector, chafed harness, or a failed sensor. | Inspect the connector and harness for moisture and corrosion, test sensor resistance against spec, replace the sensor if out of range. |
| CID 0102 - FMI 04 | Intake manifold (boost) pressure sensor signal reads below the valid range, an open circuit or short to ground on the sensor wiring. | Corroded connector or chafed harness near the turbo and intake, often from vibration and debris intrusion in forestry duty, or a failed sensor. | Check sensor supply voltage and connector condition, test the sensor, replace if faulty. Engine may derate or run in reduced power until the fault clears. |
| CID 0247 - FMI 09 | Loss of communication on the Cat data link between the engine ECM and the machine/implement ECM. | Damaged data link wiring, a loose or corroded connector at either ECM, a blown fuse, or low supply voltage to a controller. | Check ECM power and ground first, then inspect data link wiring and connectors end to end. Confirm both ECMs power up before chasing individual sensors. |
| CID 0574 - FMI 05 | Grapple detent solenoid circuit reads an open circuit; the solenoid that holds the grapple in its detented (locked) position is not receiving current. | Broken wiring at the boom/grapple pivot, a high-flex fatigue point, a failed solenoid coil, or a blown fuse/relay. | Check the fuse and relay first, then measure solenoid coil resistance, and inspect the harness at the grapple rotator and boom hinge points for chafing. |
| CID 0451 - FMI 06 | Grapple rotate solenoid circuit reads current above normal, a short to ground on the rotate-direction solenoid driver. | Chafed or pinched wiring in the boom harness, water intrusion at the rotator connector, or a shorted solenoid coil. | Disconnect the solenoid and check coil resistance to isolate solenoid versus harness, inspect rotator harness routing for pinch points, repair or replace as needed. |
| CID 0581 - FMI 05 | Power shift (transmission) solenoid circuit reads an open circuit. | Failed solenoid coil, a disconnected connector, or a broken wire in the transmission harness. | Check the connector at the solenoid, measure coil resistance, and trace the harness back to the transmission ECM for an open. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
574 attachments & work tools
Loader/crane boom
Rear-mounted knuckleboom-style loader with rack-and-pinion swing and a telescopic boom giving roughly 6.9 m (22 ft 9 in) of reach and about 250 degrees of slew rotation. Cat markets it under the F71/F73 crane designation for this size class, with gross lift torque in the 22,900 N·m (16,875 lb-ft) range.
Grapple work tool
Standard tool is a European-style butt-and-bypass timber grapple with a high-strength steel dampener to cushion closing shock; jaw opening is quoted around 1,575 mm (62 in). The grapple mounts on a hydraulic rotator driven off the machine's main pump so the operator can spin the load without repositioning the boom.
Log bunks / load bed
Standard is an adjustable wood-log bunk with floating cam stakes, about 5.64 m (222 in) long, rated near 14.5 t (32,000 lb) on the base 8-wheel chassis. An optional clam-shell bunk of about 8.53 sq m (28 sq ft) is available for smaller/mixed wood loads; published bunk capacity with the clam option runs lower, around 11.8-14 t (26,000-30,800 lb) depending on configuration and source, so treat exact figures as varying by configuration.
Hydraulic system for work tools
Work tools (loader, grapple rotator, bunk functions) run off a PVG-type variable-displacement, load-sensing piston pump rated near 250 L/min (66 gpm) drawing from a roughly 121 L (32 gal) reservoir. This is standard-fit for the loader/grapple package and does not require a separate hydraulic add-on kit for the factory-offered forestry tools.
Tire and track ground-engagement options
Standard fitment is 700/50 x 26.5 tires front and rear; 800/50 x 26.5 is the factory upsize option for softer or wetter ground. Bogie tracks are offered as an alternative to tires for extra flotation, and a front-axle bogie lift option is available to reduce ground pressure or aid maneuvering over obstacles.
Axle / bogie configuration
Machine rides on heavy-duty NAF bogie axles front and rear (current-production spec sheets list this as standard on the 574); this bogie arrangement is what the tire and track options above bolt to.
Operator cab guarding
The forwarder cab is built for high-visibility forestry work; reinforced/polycarbonate window guarding for the front, rear, and side glass is commonly fitted for operator protection in log-handling duty. Exact factory guarding package (OPS/FOPS-rated screens vs standard glass) should be confirmed against the specific unit's build sheet.
Series/generation note
Sources split on the powertrain behind the 574 name: current dealer literature for the 574 forwarder lists a Cat C6.6 ACERT engine paired to an electric power-shift transmission, while an earlier production run (serial-prefix range beginning around 1999-2003) is documented as using the Cat 3126 engine. Confirm engine/hydraulic pump generation against the machine's serial number before assuming work-tool hydraulic flow and fitment match current-production specs.
All 574 assemblies by section
Every catalogued assembly group for the Caterpillar 574. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
136-0596 Aftercooler Gp-Water
| 03***83 | Nipple-Front Axle Suction Port | 1 |
| 10***46 | Hose | 1 |
| 13***96 | Aftercooler Group-Water | 1 |
165-3609 Air Cleaner Gp
| 16***96 | Cover | 1 |
| 16***99 | Bracket | 1 |
| 16***00 | Bracket | 1 |
161-4603 Air Cleaner Gp
| 15***17 | Filter Element As-Air; (Primary) | 1 |
| 15***19 | Filter Element As-Air; (Secondary) | 1 |
| 16***03 | Air Cleaner Group | 1 |
136-0589 Lines Gp-Air
| 13***88 | Hose | 1 |
| 13***89 | Lines Group-Air | 1 |
| 8T***03 | Clamp; (Hose) | 2 |
7w-9248 Manifold Gp-Exhaust
| 10***38 | Manifold-Exhaust | 1 |
| 11***00 | Gasket-Manifold | 3 |
| 14***48 | Bolt; (M10x1.5x65-mm)(M10x1.50x65mm) | 12 |
143-2936 Manifold Gp-Inlet
| 11***50 | Gasket | 1 |
| 14***36 | Manifold Group-Inlet | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
165-3612 Muffler Gp
| 15***05 | Clamp As | 2 |
| 16***09 | Bracket | 1 |
| 16***10 | Cover | 1 |
149-2409 Turbocharger Gp
| 14***09 | Turbocharger Group | 1 |
| 14***52 | Turbocharger Group | 1 |
| 3E***17 | Locknut; (M10x1.5-Thd)(Spiralock) | 4 |
149-6452 Turbocharger Gp
| 11***58 | Cartridge Group-Turbocharger | 1 |
| 11***16 | Housing-Turbine | 1 |
| 12***54 | Seal-O-Ring | 1 |
Basic Engine
108-5759 Camshaft Gp
| 10***94 | Plate-Thrust | 1 |
| 10***59 | Camshaft Group; (Single) | 1 |
| 13***76 | Camshaft Assem. | 1 |
4w-3462 Carrier Gp-Seal
| 23***83 | Gasket | 1 |
| 24***76 | Seal | 1 |
| 2W***46 | Cover | 1 |
4w-2108 Cover Gp-Cylinder Block
| 11***18 | Bolt As; (M8x1.25x16-mm) | 4 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 2W***44 | Cover | 1 |
136-0815 Cover Gp-Front Housing
| 10***20 | Cover As-Front | 1 |
| 13***19 | Seal-Integral; (Integral) | 1 |
| 13***15 | Cover Group-Front Housing | 1 |
144-7138 Cover Gp-Front Housing
| 10***20 | Cover As-Front | 1 |
| 13***19 | Seal-Integral; (Integral) | 1 |
| 14***38 | Cover Group-Front Housing | 1 |
9y-7620 Cover Gp-Valve Mechanism
| 11***40 | Gasket; (Valve Cover) | 1 |
| 11***61 | Cover Assem. | 1 |
| 2W***25 | Cap As-Oil Filler; (Engine) | 1 |
113-6087 Crankshaft Gp
| 10***08 | Bearing-Main; (Standard) | 6 |
| 11***87 | Crankshaft Group | 1 |
| 14***62 | Bearing; (0.25mm Undersize) | 0 |
129-1163 Cylinder Block Gp
| 12***63 | Cylinder Block As | 1 |
| 5P***47 | Washer (Bracket To Valve Support) | 14 |
| 7E***68 | Cap-Crankshaft Bearing | 7 |
129-1164 Cylinder Block Gp
| 12***63 | Cylinder Block As | 1 |
| 12***64 | Cylinder Block Group | 1 |
| 21***86 | Bearing-Sleeve; (Camshaft) | 1 |
129-1165 Cylinder Block Gp
| 12***64 | Cylinder Block Group | 1 |
| 12***65 | Cylinder Block Group | 1 |
| 1W***07 | Sleeve | 2 |
190-9066 Cylinder Head As
| 11***61 | Sleeve | 6 |
| 16***63 | Insert-Valve Seat; (Inlet) | 6 |
| 19***66 | Cylinder Head As | 1 |
140-7373 Cylinder Head As
| 11***36 | Seal-Valve Stem | 12 |
| 14***73 | Cylinder Head As | 1 |
| 19***66 | Cylinder Head As | 1 |
140-7370 Cylinder Head Gp
| 12***36 | Bolt-Hex Head; (M20x2.5x160mm) | 14 |
| 14***70 | Cylinder Head Group | 1 |
| 14***71 | Cylinder Head Group | 1 |
140-7371 Cylinder Head Gp
| 11***36 | Seal-Valve Stem | 12 |
| 13***19 | Valve-Exhaust | 6 |
| 14***71 | Cylinder Head Group | 1 |
160-5130 Cylinder Head Gp
| 14***71 | Cylinder Head Group | 1 |
| 16***30 | Cylinder Head Group | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 3 |
7c-2428 Damper & Pulley Gp
| 10***50 | Pulley; (3 Groove) | 1 |
| 20***88 | Damper Assem. | 1 |
| 6V***30 | Bolt; (M10x1.5x60-mm) | 8 |
4p-2844 Damper & Pulley Gp
| 20***88 | Damper Assem. | 1 |
| 4P***43 | Pulley | 1 |
| 4P***44 | Damper & Pulley Group | 1 |
136-3632 Drain Gp-Engine Oil
| 11***19 | Plug-Magnetic; (Engine Oil Pan Drain) | 1 |
| 13***32 | Drain Group-Engine Oil | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
4p-4713 Drive Gp-Fan
| 4P***13 | Drive Group-Fan | 1 |
| 4P***16 | Drive Group-Fan | 1 |
| 6V***49 | Bolt; (M10x1.5x50-mm) | 4 |
4p-8116 Drive Gp-Fan
| 4P***86 | Bracket As | 1 |
| 4P***16 | Drive Group-Fan | 1 |
| 4W***03 | Cup-Roller Bearing | 2 |
4w-5428 Drive Gp-Water Pump
| 03***75 | V-Belt; (Pump Drive)(Water) | 1 |
| 10***67 | Plate As-Idler | 1 |
| 11***04 | Pulley As-Idler | 1 |
170-8977 Flywheel Gp
| 17***77 | Flywheel Group | 1 |
| 1W***64 | Gear-Flywheel Ring; (126-Teeth) | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 8 |
7w-9375 Flywheel Gp
| 2N***99 | Gear (126 Teeth) | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 8 |
| 6V***97 | Bolt; (M12x1.75x40-mm)(Locking) | 8 |
101-4540 Gear Gp-Front
| 10***07 | Shaft-Cam Idler | 1 |
| 10***08 | Plate-Retaining | 1 |
| 10***40 | Gear Group-Front | 1 |
7w-8813 Housing Gp-Flywheel
| 2P***94 | Plug-Sealing | 1 |
| 6V***42 | Bolt (M10x1.50x40mm) | 2 |
| 7C***33 | Housing-Flywheel | 1 |
101-4539 Housing Gp-Front
| 10***39 | Housing Group-Front | 1 |
| 10***11 | Plug | 2 |
| 13***42 | Housing-Front | 1 |
4w-2515 Lifting Gp-Engine
| 4W***82 | Plate-Lifting; (Rear)(Rear) | 1 |
| 4W***83 | Plate-Lifting; (Front) | 1 |
| 4W***15 | Lifting Group | 1 |
165-3616 Mounting Gp-Engine
| 16***57 | Bracket | 1 |
| 16***58 | Bracket; (Rh) | 1 |
| 16***69 | Bracket; (Lh) | 1 |
9y-0642 Mounting Gp-Refrigerant Compr
| 7E***02 | Bracket | 1 |
| 7W***52 | Plate | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 9 |
126-5931 Pan Gp-Oil
| 11***02 | Gasket-Oil Pan | 1 |
| 12***31 | Pan Group-Oil; -Engine | 1 |
| 14***84 | Pan-Oil | 1 |
147-9592 Piston & Rod Gp
| 10***66 | Ring-Piston; (Oil Regulating) | 1 |
| 13***46 | Ring-Piston; (Top) | 1 |
| 13***83 | Crown As-Piston | 1 |
156-0228 Plug Gp-Cylinder Block
| 15***28 | Plug Group-Engine | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 2 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
4w-5429 Pulley Gp-Crankshaft
| 2W***81 | Plate-Clamp; (Pulley Clamp) | 1 |
| 4W***29 | Pulley Group-Crankshaft; Crankshaft Pulley Group | 1 |
| 7W***73 | Pulley-Crankshaft; (1-Groove) | 1 |
153-3979 Pulley Gp-Fan
| 15***79 | Pulley Group-Fan | 1 |
| 15***80 | Adapter-Fan | 1 |
| 5A***04 | Bolt-Socket Head; (M8x1.25x25-mm) | 6 |
107-7722 Rocker Arm Gp
| 0L***26 | Plug -13mm(.512 In.) Outside Dia. | 1 |
| 10***76 | Rocker Arm As; (Unit Injector) | 1 |
| 10***22 | Rocker Arm Group-Valve | 1 |
115-4203 Seal Gp-Crankshaft
| 11***03 | Seal Group-Crankshaft | 1 |
| 11***21 | Seal Group-Crankshaft; (Front) | 1 |
| 4R***99 | Excluder-Crankshaft Seal | 1 |
4p-4372 Mechanism Gp-Fuel Pump & Valve
| 10***22 | Rocker Arm Group-Valve | 6 |
| 14***47 | Arm As-Lifter | 4 |
| 2D***42 | Ball 6.35 mm(.25 In.)Diameter | 2 |
Cooling System
100-6269 Cooler Gp-Engine Oil
| 10***69 | Cooler Group-Engine Oil | 1 |
| 18***95 | Core As-Engine Oil Cooler | 1 |
| 7C***60 | Gasket | 1 |
177-0840 Cooling Ar
| 16***81 | Strip; (.726-M) | 0 |
| 16***89 | Washer | 1 |
| 17***78 | Hose As | 1 |
165-3615 Fan Gp
| 16***15 | Fan Group | 1 |
| 5S***97 | Spider Assem. | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 6 |
144-9474 Lines Gp-Water
| 12***47 | Housing-Water Regulating | 1 |
| 12***69 | Regulator-Water Temperature; (94-Deg C) | 1 |
| 14***74 | Lines Group-Water | 1 |
159-3137 Pump Gp-Water
| 14***88 | Seal As; (Water Pump) | 1 |
| 15***52 | Impeller-Pump | 1 |
| 15***37 | Pump Group-Water | 1 |
143-5609 Pump Gp-Water
| 14***09 | Pump Group-Water | 1 |
| 15***37 | Pump Group-Water | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
143-5608 Pump Gp-Water
| 14***08 | Pump Group-Water | 1 |
| 14***09 | Pump Group-Water | 1 |
| 2M***53 | Seal--To Seal Brake Housing To Main Housing | 1 |
165-3613 Radiator & Hyd Oil Cooler Gp
| 16***56 | Hose | 1 |
| 16***56 | Tube As | 1 |
| 16***70 | Hose | 1 |
180-0650 Radiator & Oil Cooler Gp
| 15***73 | Seal | 8 |
| 17***77 | Sleeve | 2 |
| 17***83 | Frame As | 1 |
171-6500 Radiator Gp
| 17***00 | Radiator Group | 1 |
172-4705 Valve Gp-Coolant Sampling
| 15***23 | Valve-Sampling; (Engine Coolant) | 1 |
| 17***05 | Valve Group-Coolant Sampling | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
Electrical And Starting System
123-6449 Alarm Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***49 | Alarm Group | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 1 |
165-3617 Alternator Gp-Charging
| 12***80 | Locknut; (M12x1.75-Thd) | 2 |
| 15***56 | Pulley; (2 Grooves) | 1 |
| 15***18 | Alternator Group-Charging | 1 |
165-3524 Battery & Wiring Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 11***34 | Switch Group-Magnetic; -Start Relay | 1 |
| 12***08 | Circuit Breaker As; (150-Ampere)(150 Amp) | 1 |
183-7988 Heater Gp-Machine
| 17***79 | Bolt | 1 |
| 17***80 | Screw | 3 |
| 18***88 | Heater Group-Machine | 1 |
133-6335 Lamp Gp-Flood
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***51 | Screw; (M4x32-mm) | 4 |
| 10***52 | Seal | 1 |
135-5549 Lamp Gp-Flood
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***49 | Lamp Group-Flood; -Cab Front | 1 |
| 14***82 | Screw; (7.4x20-mm) | 2 |
166-9013 Lamp Gp-Flood
| 13***40 | Locknut; (M8x1.25-Thd) | 2 |
| 13***35 | Lamp Group-Flood; -24-Volt, 65-Watt-Blackout | 1 |
| 16***13 | Lamp Group-Flood | 1 |
160-5671 Lamp Gp-Indicator -Warning
| 16***71 | Lamp Group-Indicator; -Warning | 1 |
| 16***38 | Lens | 2 |
| 16***05 | Lamp | 2 |
187-1922 Lighting Gp-Flood
| 09***92 | Washer, Tooth | 2 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
160-5666 Lighting Gp-Flood
| 16***66 | Lighting Group-Flood | 1 |
| 16***13 | Lamp Group-Flood | 20 |
165-3527 Lighting Gp-Roading
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 13***49 | Lamp Group-Flood; -Cab Front | 2 |
167-7382 Preheater Gp-Machine
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***34 | Switch Group-Magnetic; -Start Relay | 1 |
| 12***07 | Film-Instruction; (On Radiator Filler Cap) | 1 |
190-3692 Sensor Gp-Pressure
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 19***98 | Sensor Group-Pressure | 1 |
| 19***92 | Sensor Group-Pressure; -Power Train Charging System | 1 |
190-3693 Sensor Gp-Pressure -Transmission High Speed
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 19***00 | Sensor Group-Pressure | 1 |
| 19***93 | Sensor Group-Pressure; -Transmission High Speed | 1 |
167-7383 Sensor Gp-Tachograph
| 16***72 | Bracket | 1 |
| 16***72 | Meter | 1 |
| 16***83 | Sensor Group-Tachograph | 1 |
238-0289 Software Gp-Monitor
| 23***89 | Software Group-Monitor | 1 |
221-2177 Software Gp-Monitor
| 22***77 | Software Group-Monitor | 1 |
221-2175 Software Gp-Monitor
| 22***75 | Software Group-Monitor | 1 |
221-2178 Software Gp-Monitor
| 22***78 | Software Group-Monitor | 1 |
221-2179 Software Gp-Monitor
| 22***79 | Software Group-Monitor | 1 |
221-2176 Software Gp-Monitor
| 22***76 | Software Group-Monitor | 1 |
221-2174 Software Gp-Monitor
| 22***74 | Software Group-Monitor | 1 |
221-2180 Software Gp-Monitor
| 22***80 | Software Group-Monitor | 1 |
7c-9458 Solenoid Gp-Shutoff
| 12***72 | Solenoid As; (Fuel Shutoff) | 1 |
| 4K***88 | Seal; Adapter To Oil Pump Outlet Manifold | 1 |
| 6V***77 | Nut (8-32 Thd) | 2 |
134-2356 Starting Aid Gp
| 10***52 | Heater As; (22-Volt, 2160-Watt)(Air Inlet) | 1 |
| 10***47 | Strap-Grounding | 1 |
| 12***79 | Stud-Taperlock; (M8x1.25x130-mm) | 1 |
207-1517 Starting Motor Gp-Electric
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***63 | Terminal As-Starter | 1 |
| 10***49 | Housing As-Starter | 1 |
111-4275 Starting Motor Gp-Electric
| 10***58 | Starting Motor Group-Electric | 1 |
| 11***75 | Starting Motor Group-Electric; (Cold Weather) | 1 |
| 11***73 | Bolt-12 Point Head; (M10x1.5x35-mm) | 3 |
106-8558 Starting Motor Gp-Electric
| 10***58 | Starting Motor Group-Electric | 1 |
| 10***59 | Starting Motor Group-Electric; Electric Starting Motor Group (Delco Remy) | 1 |
106-8559 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***63 | Terminal As-Starter | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
118-3534 Switch Gp-Magnetic
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***34 | Switch Group-Magnetic; -Start Relay | 1 |
| 3E***65 | Wedge; (Receptacle Lock) (2 Pin) | 1 |
165-3534 Warning Gp-Backup
| 12***49 | Alarm Group | 1 |
| 16***34 | Warning Group-Backup | 1 |
| 17***71 | Cover As | 1 |
180-3605 Wiring Gp-Console
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
160-5667 Wiring Gp-Console
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
165-3525 Wiring Gp-Machine
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***55 | Kit; (Connecting Plug) (12-Pin) (Includes Plug As Wedge & Interface Seal) | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
Engine Arrangement
172-5639 Engine Ar
| 10***69 | Cooler Group-Engine Oil | 1 |
| 10***39 | Housing Group-Front | 1 |
| 11***75 | Starting Motor Group-Electric; (Cold Weather) | 1 |
149-1153 Engine Ar
| 10***69 | Cooler Group-Engine Oil | 1 |
| 10***39 | Housing Group-Front | 1 |
| 11***75 | Starting Motor Group-Electric; (Cold Weather) | 1 |
149-1154 Engine Ar-Core
| 10***40 | Gear Group-Front | 1 |
| 10***95 | Control Group-Fuel Injection | 1 |
| 10***31 | Lines Group-Fuel Ratio Control; Air Fuel Ratio Control Lines Group, Angle | 1 |
163-8727 Installation Ar-Engine
| 16***27 | Installation Ar-Engine | 1 |
| 16***09 | Air Cleaner Group | 1 |
| 16***12 | Muffler Group | 1 |
Frame And Body
192-4958 Bracket Gp-Light -Lh
| 10***81 | Spacer; (13.5x17.5x12.4-mm Thk) | 1 |
| 12***80 | Locknut; (M12x1.75-Thd) | 1 |
| 19***54 | Bracket As | 1 |
192-4960 Bracket Gp-Light -Rh
| 10***81 | Spacer; (13.5x17.5x12.4-mm Thk) | 1 |
| 12***80 | Locknut; (M12x1.75-Thd) | 1 |
| 19***56 | Bracket As | 1 |
167-7379 Bunk Gp
| 16***61 | Stake | 2 |
| 16***62 | Bracket | 2 |
| 16***65 | Pin | 2 |
197-7313 Bunk Gp
| 09***07 | Bolt; (M16x2x120-mm) | 2 |
| 16***65 | Pin | 2 |
| 19***02 | Bunk As | 1 |
192-5889 Conversion Ar-Roading
| 19***94 | Mirror Group-Rear View | 1 |
| 19***96 | Conversion Group-Roading | 1 |
| 19***87 | Visor Group-Cab | 1 |
191-2096 Conversion Gp-Roading
| 09***33 | Bolt-Socket Head; (M5x0.8x20-mm) | 6 |
| 09***86 | Screw-Machine; (M6x1x25-mm) | 6 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
194-5407 Frame Ar-Rear -Long
| 19***07 | Frame Rear Axle; -Long | 1 |
| 19***08 | Frame Group-Rear; -Long | 1 |
| 19***09 | Shaft Group-Drive; -Long | 1 |
167-7365 Frame Ar-Rear -Standard
| 16***22 | Frame Group-Rear; -Standard | 1 |
| 16***42 | Shaft Group-Drive | 1 |
| 16***01 | Lines Group-Diff Lock & Park Bk | 1 |
167-7366 Frame Ar-Rear -Long
| 16***01 | Lines Group-Diff Lock & Park Bk | 1 |
| 16***66 | Frame Rear Axle; -Long | 1 |
| 16***84 | Frame Group-Rear; -Long | 1 |
215-6440 Frame Ar-Rear
| 19***09 | Shaft Group-Drive; -Long | 1 |
| 19***10 | Lines Group-Diff Lock & Park Bk | 1 |
| 21***07 | Shaft Group-Drive | 1 |
202-8656 Frame Ar-Rear -Standard
| 16***01 | Lines Group-Diff Lock & Park Bk | 1 |
| 16***85 | Shaft Group-Drive | 1 |
| 20***55 | Frame Group-Rear; -Standard | 1 |
211-7316 Frame As-Front
| 16***81 | Bracket | 1 |
| 16***40 | Plate | 1 |
| 17***98 | Guard | 2 |
170-7400 Frame As-Front
| 16***11 | Plate As | 1 |
| 16***40 | Plate | 1 |
| 17***00 | Frame As-Front | 1 |
163-5871 Frame Gp-Bogie Lift
| 15***42 | Fitting | 2 |
| 16***83 | Pin | 4 |
| 16***63 | Plate | 4 |
195-1060 Frame Gp-Front
| 09***49 | Bolt; (M8x1.25x40-mm) | 2 |
| 16***46 | Spacer; (46x51x13.5-mm Thk) | 4 |
| 16***53 | Pin | 2 |
165-3520 Frame Gp-Front
| 09***49 | Bolt; (M8x1.25x40-mm) | 2 |
| 16***46 | Spacer; (46x51x13.5-mm Thk) | 4 |
| 16***53 | Pin | 2 |
202-8653 Frame Gp-Rear -Standard
| 16***79 | Guard As-Top | 1 |
| 16***31 | Plate | 1 |
| 16***63 | Rod | 1 |
194-5408 Frame Gp-Rear -Long
| 16***60 | Pin | 1 |
| 16***65 | Pin | 8 |
| 16***33 | Screw | 25 |
168-7343 Frame Gp-Rear -Long
| 16***79 | Guard As-Top | 1 |
| 16***31 | Plate | 1 |
| 16***63 | Rod | 1 |
215-6441 Frame Gp-Rear -Long
| 16***60 | Pin | 1 |
| 16***33 | Screw | 25 |
| 16***13 | Bracket As | 2 |
168-7347 Frame Gp-Rear -Standard
| 16***77 | Frame As-Rear | 1 |
| 16***79 | Guard As-Top | 1 |
| 16***63 | Rod | 1 |
168-0384 Frame Gp-Rear -Long
| 16***60 | Pin | 1 |
| 16***62 | Bracket | 6 |
| 16***65 | Pin | 6 |
202-8655 Frame Gp-Rear -Standard
| 16***60 | Pin | 1 |
| 16***62 | Bracket | 6 |
| 16***65 | Pin | 6 |
165-3522 Frame Gp-Rear -Standard
| 15***85 | Washer; (M12) | 1 |
| 16***60 | Pin | 1 |
| 16***61 | Stake | 4 |
165-3526 Guard Gp-Bottom
| 16***74 | Bracket | 3 |
| 16***87 | Winch Group | 1 |
| 16***05 | Link | 1 |
204-6712 Guard Gp-Brush
| 12***05 | U-Bolt | 2 |
| 20***12 | Guard Group-Brush | 1 |
| 20***13 | Guard As | 1 |
165-3521 Hitch Gp-Articulating & Osc
| 15***75 | Fitting-Grease | 2 |
| 16***48 | Ring | 1 |
| 16***46 | Spacer; (46x51x13.5-mm Thk) | 4 |
165-3523 Hood Gp
| 15***83 | Washer-Hard; (8.4x35x2.5-mm Thk) | 8 |
| 15***06 | Lock As | 2 |
| 15***85 | Bracket; (Rh) | 1 |
197-7405 Hood Gp
| 12***78 | Locknut; (M6x1-Thd) | 18 |
| 19***11 | Frame As | 1 |
| 19***10 | Cover As | 1 |
198-5961 Hood Gp
| 12***78 | Locknut; (M6x1-Thd) | 8 |
| 16***25 | Plate | 1 |
| 16***89 | Washer | 1 |
178-2344 Hood Gp
| 16***00 | Strip; (5.0m) | 0 |
| 17***44 | Hood Group | 1 |
| 17***32 | Strip-Left | 1 |
165-3530 Ladder Gp
| 16***81 | Bracket | 1 |
| 16***06 | Clamp As | 1 |
| 16***18 | Bracket | 1 |
165-3531 Link Gp-Steering Frame Lock
| 16***20 | Link | 1 |
| 16***31 | Link Group-Steering Frame Lock | 1 |
| 5V***80 | Pin | 2 |
205-1770 Tensioner Gp-Cable
| 20***70 | Tensioner Group-Cable | 1 |
| 2P***87 | Spring (Outer) | 1 |
| 6V***39 | Washer-Hard-Alt Strap To Fan Drive Belt | 1 |
Fuel System
129-1102 Base Gp-Fuel Filter
| 11***23 | Insert-Fuel Filter | 1 |
| 12***01 | Valve Group-Check; -Fuel-Fuel Filter | 1 |
| 12***02 | Base Group-Fuel Filter | 1 |
105-1695 Control Gp-Fuel Injection
| 10***95 | Control Group-Fuel Injection | 1 |
| 16***56 | Control Group-Fuel Injection | 1 |
| 6V***83 | Bolt (16mm Long); (M6x1x16-mm) | 4 |
165-3614 Control Gp-Governor
| 15***90 | Bracket As | 1 |
| 15***99 | Rod | 1 |
| 16***98 | Ball Joint | 2 |
4p-5555 Control Gp-Governor
| 4P***05 | Lever | 1 |
| 4P***55 | Control Group-Governor | 1 |
| 6V***83 | Bolt (16mm Long); (M6x1x16-mm) | 2 |
7e-8794 Drive Gp-Gov & Transfer Pump
| 10***85 | Lever-Shutoff; (Output) | 1 |
| 1W***65 | Ring-Retaining | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
7w-4812 Fastener Gp-Fuel Inj Pump
| 1T***68 | Seal-O-Ring; (Fuel Injection Pump) | 1 |
| 6F***73 | Seal--To Top Cover On Selector Valve | 1 |
| 6V***18 | Bolt (M8x1.25x45mm); (M8x1.25x35-mm) | 3 |
144-7159 Governor Gp-Unit Injector
| 10***91 | Spring-Oil Side | 1 |
| 11***73 | Cam Assem. | 1 |
| 13***62 | Governor Group-Unit Injector | 1 |
144-8229 Governor Gp-Unit Injector
| 14***59 | Governor Group-Unit Injector; (Unit Injector) | 1 |
| 14***29 | Governor Group-Unit Injector; (Unit Injector) | 1 |
| 7W***12 | Fastener Group-Governor; Fastener Group(Governor) (~1c K5811) | 1 |
133-3062 Governor Gp-Unit Injector
| 10***90 | Spring-Air Side | 1 |
| 10***92 | Spring-Servo | 1 |
| 10***93 | Spring-Return | 1 |
165-3529 Lines Gp-Fuel
| 16***67 | Carrier | 2 |
| 16***41 | Hose As | 1 |
| 16***42 | Hose As | 1 |
149-8771 Lines Gp-Fuel Filter
| 00***64 | End; (Hose) | 2 |
| 10***29 | Hose; (60-cm) | 0 |
| 12***90 | Valve | 2 |
165-3620 Lines Gp-Fuel Filter
| 12***49 | Pump Group-Fuel Prm & Water Sep | 1 |
| 16***95 | Bracket | 1 |
| 16***20 | Lines Group-Fuel Filter | 1 |
107-7731 Lines Gp-Fuel Ratio Control
| 10***80 | Tube Assem. | 1 |
| 10***31 | Lines Group-Fuel Ratio Control; Air Fuel Ratio Control Lines Group, Angle | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
7w-8434 Lines Gp-Governor Oil
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 2 |
| 4J***77 | Seal - O - Ring (11.23mm Od) | 2 |
| 6V***28 | Elbow-Face Seal (For 6.35mm Od Tube) | 1 |
140-7368 Pump Gp-Fuel Injection
| 11***18 | Seal-O-Ring; (26.64mm Id) | 1 |
| 13***25 | Bolt-Socket Head; (M6x1x30-mm) | 1 |
| 14***68 | Pump Group-Fuel Injection | 1 |
127-6449 Water Sep & Fuel Prm Pump Gp
| 11***01 | Bowl As-Water Collection | 1 |
| 11***89 | Element-Water Separator; (Water/Fuel Seperator) | 1 |
| 11***61 | Base Assem. | 1 |
165-3528 Tank Gp-Fuel
| 12***97 | Screw-Machine | 5 |
| 12***80 | Locknut; (M12x1.75-Thd) | 1 |
| 16***81 | Float | 1 |
129-1101 Valve Gp-Check
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 12***01 | Valve Group-Check; -Fuel-Fuel Filter | 1 |
| 6V***23 | Ring; (Backup) (13.16mm Id) | 1 |
215-4399 Water Sep & Fuel Prm Pump Gp
| 10***08 | Pump As; (Fuel Priming) | 1 |
| 12***57 | Base As-Filter; (Primary Fuel Filter) | 1 |
| 14***95 | Filter Element-Fuel; (Water Separator) | 1 |
Hydraulic System
174-2414 Actuator Gp-Pilot Control
| 17***14 | Actuator Group-Pilot Control | 1 |
| 17***17 | Valve Group-Solenoid | 2 |
| 21***76 | Block | 1 |
168-0524 Control & Lines Gp-Gate
| 11***83 | Connector | 2 |
| 12***56 | Bolt-Socket Head; (M5x0.8x60-mm) | 4 |
| 16***03 | Guard; (1.0 M) | 0 |
179-6378 Cooler Gp-Hydraulic Oil
| 17***74 | Core As | 1 |
| 17***75 | Bracket As-Upper | 1 |
| 17***76 | Bracket As-Lower | 1 |
169-0838 Cover Gp-Valve End
| 16***38 | Cover Group-Valve End | 1 |
| 17***95 | Connector As | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
215-1910 Cylinder & Lines Gp-Blade
| 14***58 | Valve Group-Solenoid; -Blade Lock | 1 |
| 15***49 | Screw-Flat Head; (M10x1.5x25-mm) | 3 |
| 16***03 | Guard; (1.0 M) | 0 |
194-5114 Cylinder Gp-Boom
| 17***72 | Fitting | 2 |
| 17***99 | Bushing | 2 |
| 17***13 | Rod As | 1 |
170-3297 Cylinder Gp-Extendable Stick
| 17***14 | Screw | 2 |
| 17***95 | Piston | 1 |
| 17***96 | Guide | 1 |
176-3929 Cylinder Gp-Extendable Stick
| 17***99 | Tube | 1 |
| 17***02 | Rod | 1 |
| 17***07 | Piston | 1 |
170-3192 Cylinder Gp-Extendable Stick
| 17***14 | Screw | 2 |
| 17***92 | Cylinder Group-Extendable Stick | 1 |
| 17***93 | Tube As | 1 |
165-1444 Cylinder Gp-Gate -Vertical
| 16***44 | Cylinder Group-Gate; -Vertical | 1 |
| 18***62 | Cylinder As | 1 |
| 18***63 | Rod As | 1 |
165-1443 Cylinder Gp-Gate -Horizontal
| 16***43 | Cylinder Group-Gate; -Horizontal | 1 |
| 18***69 | Cylinder As | 1 |
| 18***70 | Rod As | 1 |
170-2203 Cylinder Gp-Grapple
| 17***03 | Cylinder Group-Grapple | 1 |
| 17***05 | Tube As | 1 |
| 17***07 | Rod As | 1 |
160-2675 Cylinder Gp-Hydraulic -Steering, Bogie
| 09***41 | Ring-Retaining | 2 |
| 16***75 | Cylinder Group-Hydraulic; -Steerin-Steering | 1 |
| 16***19 | Cylinder As | 1 |
161-5924 Cylinder Gp-Hydraulic -Steering, Bogie
| 08***36 | Clip-Internal; (Water Temperature Regulator) | 4 |
| 16***24 | Cylinder Group-Hydraulic; -Steering, Bogie | 1 |
| 17***43 | Kit-Seal | 1 |
165-1440 Cylinder Gp-Ladder
| 16***40 | Cylinder Group-Ladder | 1 |
| 18***08 | Cylinder As | 1 |
| 18***09 | Rod As | 1 |
170-1406 Cylinder Gp-Lift
| 17***72 | Fitting | 2 |
| 17***99 | Bushing | 2 |
| 17***06 | Cylinder Group-Lift | 1 |
168-7646 Cylinder Gp-Oscillation Lock -Oscillation Lock
| 16***46 | Cylinder Group-Oscillation Lock; -Oscillation Lock | 1 |
| 18***67 | Pin | 1 |
| 18***28 | Cylinder As | 1 |
170-1423 Cylinder Gp-Stick
| 17***72 | Fitting | 2 |
| 17***00 | Bushing | 2 |
| 17***23 | Cylinder Group-Stick | 1 |
126-2075 Filter Gp-Oil -Impl, Power Train Case Drain
| 09***21 | Filter-Oil; (Advanced Efficiency)(Hydraulic, Case Drain) | 1 |
| 12***75 | Filter Group-Oil; -Hyraulic Oil-Hydraulic, Case Drain | 1 |
| 12***76 | Base As; (Oil Filter) | 1 |
163-4033 Filter Gp-Oil
| 06***02 | Seal-O-Ring | 1 |
| 16***33 | Filter Group-Oil; -Hydraulic Return, Implement Return | 1 |
163-8730 Hydraulic Ar
| 16***75 | Cylinder Group-Hydraulic; -Steerin-Steering | 4 |
| 16***24 | Cylinder Group-Hydraulic; -Steering, Bogie | 4 |
| 16***30 | Hydraulic Ar | 1 |
210-9326 Lines Gp-Bogie Lift
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 4 |
| 14***58 | Elbow As | 4 |
| 14***81 | Elbow Group | 1 |
165-6899 Lines Gp-Bogie Lift
| 16***97 | Hose As | 1 |
| 16***33 | Hose As | 1 |
| 16***35 | Hose As | 1 |
166-7328 Lines Gp-Bogie Lift Control
| 10***03 | Elbow | 1 |
| 16***53 | Valve Group-Bank 2 | 1 |
| 16***75 | Hose As | 4 |
168-4619 Lines Gp-Boom Control
| 16***03 | Guard; (1.0 M) | 0 |
| 16***93 | Clamp-Hose | 3 |
| 16***58 | Hose As | 2 |
209-1501 Lines Gp-Boom Control
| 12***56 | Bolt-Socket Head; (M5x0.8x60-mm) | 4 |
| 14***16 | Connector Group | 2 |
| 14***18 | Connector As | 6 |
165-6904 Lines Gp-Gate
| 16***37 | Hose As | 2 |
| 16***03 | Guard; (1.0 M) | 0 |
| 16***93 | Clamp-Hose | 1 |
165-6896 Lines Gp-Hydraulic
| 11***83 | Connector | 2 |
| 12***11 | Hose-Hydraulic; (146-cm) | 0 |
| 12***75 | Filter Group-Oil; -Hyraulic Oil-Hydraulic, Case Drain | 1 |
210-9325 Lines Gp-Hydraulic
| 11***95 | Plug As | 1 |
| 12***75 | Filter Group-Oil; -Hyraulic Oil-Hydraulic, Case Drain | 1 |
| 16***19 | Hose As | 1 |
165-7290 Lines Gp-Ladder
| 11***66 | Connector As-Orifice; (1.6-mm) | 2 |
| 16***07 | Adapter | 2 |
| 16***28 | Hose As | 1 |
178-3540 Lines Gp-Log Loader
| 11***93 | Lockwasher | 6 |
| 17***72 | Bracket | 1 |
| 17***73 | Adapter | 2 |
178-3539 Lines Gp-Log Loader
| 11***93 | Lockwasher | 4 |
| 17***72 | Bracket | 1 |
| 17***73 | Adapter | 2 |
194-6496 Lines Gp-Log Loader
| 11***93 | Lockwasher | 4 |
| 15***71 | Seal | 1 |
| 15***72 | Seal | 1 |
178-6262 Lines Gp-Log Loader
| 11***93 | Lockwasher | 4 |
| 17***72 | Bracket | 1 |
| 17***73 | Adapter | 2 |
208-5386 Lines Gp-Log Loader
| 14***27 | Connector Group | 2 |
| 14***28 | Connector Assem. | 3 |
| 14***44 | Connector Group | 3 |
170-3228 Lines Gp-Log Loader
| 09***49 | Bolt; (M8x1.25x40-mm) | 4 |
| 13***40 | Locknut; (M8x1.25-Thd) | 8 |
| 15***58 | Washer | 4 |
170-3261 Lines Gp-Log Loader
| 09***49 | Bolt; (M8x1.25x40-mm) | 4 |
| 13***40 | Locknut; (M8x1.25-Thd) | 10 |
| 15***58 | Washer | 4 |
205-1626 Lines Gp-Log Loader
| 20***63 | Bracket As | 1 |
| 20***68 | Bracket As | 1 |
| 20***47 | Bracket As | 1 |
178-6261 Lines Gp-Log Loader
| 11***93 | Lockwasher | 4 |
| 17***72 | Bracket | 1 |
| 17***73 | Adapter | 2 |
179-0690 Lines Gp-Log Loader
| 11***93 | Lockwasher | 6 |
| 17***72 | Bracket | 1 |
| 17***73 | Adapter | 2 |
194-7026 Lines Gp-Log Loader
| 16***03 | Guard; (1.0 M) | 0 |
| 16***93 | Clamp-Hose | 3 |
| 16***57 | Hose As | 4 |
170-0863 Lines Gp-Log Loader
| 15***58 | Washer | 6 |
| 17***63 | Lines Group-Log Loader | 1 |
| 17***75 | Seal | 4 |
165-6903 Lines Gp-Oscillation Lock
| 16***59 | Bracket | 1 |
| 16***03 | Guard; (1.0 M) | 0 |
| 16***93 | Clamp-Hose | 1 |
179-3616 Lines Gp-Pressure Sensor
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***49 | Screw-Flat Head; (M10x1.5x25-mm) | 3 |
210-9327 Lines Gp-Pressure Sensor
| 15***49 | Screw-Flat Head; (M10x1.5x25-mm) | 3 |
| 16***73 | Hose As | 1 |
| 16***70 | Hose As | 1 |
165-6902 Lines Gp-Steering
| 16***66 | Bracket As | 1 |
| 16***93 | Clamp-Hose | 1 |
| 16***52 | Hose As | 2 |
167-7380 Pump Gp-Hydraulic Tank Fill
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
162-5696 Pump Gp-Metering -Steering
| 10***04 | Seal | 1 |
| 11***80 | Cap | 1 |
| 11***90 | Spacer; (23.8x55.9x4-mm Thk) | 1 |
155-9925 Pump Gp-Piston
| 09***69 | Bolt-Socket Head; (M5x0.8x25-mm) | 4 |
| 09***47 | Pin, Dowel | 1 |
| 10***62 | Dowel | 1 |
167-7381 Pump Gp-Vacuum
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***52 | Valve-Breaker Relief; (Hydraulic Tank Relief) | 1 |
165-6895 Tank & Filter Gp-Hydraulic
| 06***02 | Seal-O-Ring | 1 |
| 11***52 | Valve-Breaker Relief; (Hydraulic Tank Relief) | 2 |
| 12***58 | Bolt-Mounting; (1/2-20x1.75-In) | 2 |
209-8746 Tank & Filter Gp-Hydraulic
| 11***52 | Valve-Breaker Relief; (Hydraulic Tank Relief) | 1 |
| 12***58 | Bolt-Mounting; (1/2-20x1.75-In) | 2 |
| 12***87 | Drain As; (Parts Serve) | 2 |
168-7468 Tank Gp-Hydraulic
| 15***83 | Cover; (Hydraulic Tank) | 1 |
| 16***66 | Cover As; (Power Train Tank) | 1 |
| 16***68 | Tank Group-Hydraulic | 1 |
168-4616 Valve & Mtg Gp-Log Loader
| 15***10 | Valve Group-Main Control; -Eight Bank | 1 |
| 16***68 | Strip | 1 |
| 16***92 | Mat-Rubber | 1 |
162-5553 Valve Gp-Bank 2
| 16***53 | Valve Group-Bank 2 | 1 |
| 17***48 | Valve As-Control; (End Cover) | 1 |
| 17***14 | Actuator Group-Pilot Control | 2 |
165-1882 Valve Gp-Bogie Float
| 16***82 | Valve Group-Bogie Float | 1 |
| 17***24 | Plug | 1 |
| 17***25 | Plug | 1 |
220-3436 Valve Gp-Check -Bogie Float Control
| 17***16 | Coil | 1 |
| 22***36 | Valve Group-Check; -Bogie Float Control | 1 |
| 22***13 | Kit-Seal | 1 |
167-4456 Valve Gp-Combination
| 16***54 | Seal-O-Ring | 32 |
| 16***71 | Valve Group-Solenoid; (Diff Lock, Parking Bk, Ladder) | 3 |
| 16***76 | Valve Group-Solenoid; (Gate) | 1 |
197-8305 Valve Gp-Combination
| 16***54 | Seal-O-Ring | 36 |
| 16***71 | Valve Group-Solenoid; (Diff Lock, Parking Bk, Ladder) | 3 |
| 16***76 | Valve Group-Solenoid; (Gate) | 1 |
169-0833 Valve Gp-Control -Boom Cylinder
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 12***43 | Seal-O-Ring | 1 |
| 12***45 | Seal-O-Ring; (25.3mm Id) | 1 |
169-0829 Valve Gp-Control -Inlet
| 16***29 | Valve Group-Control; -Inlet | 1 |
| 17***91 | Valve-Shuttle | 1 |
| 17***93 | Plug | 1 |
169-0831 Valve Gp-Control -Tilt, Gate Cylinder
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 12***43 | Seal-O-Ring | 1 |
| 12***45 | Seal-O-Ring; (25.3mm Id) | 1 |
169-0830 Valve Gp-Control -Steering Cylinder
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 12***43 | Seal-O-Ring | 1 |
| 12***45 | Seal-O-Ring; (25.3mm Id) | 1 |
174-2426 Valve Gp-Control -Bogie Lift
| 17***75 | Valve As-Line Relief | 1 |
| 17***26 | Valve Group-Control; -Bogie Lift | 1 |
| 17***27 | Kit-Seal | 1 |
169-0834 Valve Gp-Control -Stick Cylinder
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 12***43 | Seal-O-Ring | 1 |
| 12***45 | Seal-O-Ring; (25.3mm Id) | 1 |
184-1172 Valve Gp-Control -Boom Swing
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 12***45 | Seal-O-Ring; (25.3mm Id) | 1 |
| 14***46 | Bolt-Socket Head; (M6x1x100-mm) | 2 |
184-1199 Valve Gp-Control -Stick Cylinder
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 12***45 | Seal-O-Ring; (25.3mm Id) | 1 |
| 14***46 | Bolt-Socket Head; (M6x1x100-mm) | 2 |
184-1201 Valve Gp-Control -Grapple Cylinder
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 12***45 | Seal-O-Ring; (25.3mm Id) | 1 |
| 14***46 | Bolt-Socket Head; (M6x1x100-mm) | 2 |
169-0835 Valve Gp-Control -Grapple Rotator
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 12***43 | Seal-O-Ring | 1 |
| 12***45 | Seal-O-Ring; (25.3mm Id) | 1 |
169-0832 Valve Gp-Control -Boom Swing
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 12***43 | Seal-O-Ring | 1 |
| 12***45 | Seal-O-Ring; (25.3mm Id) | 1 |
184-2543 Valve Gp-Control -Stick Extension Cylinder
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 12***45 | Seal-O-Ring; (25.3mm Id) | 1 |
| 14***46 | Bolt-Socket Head; (M6x1x100-mm) | 2 |
169-0837 Valve Gp-Control -Stick Extension Cylinder
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 12***43 | Seal-O-Ring | 1 |
| 12***45 | Seal-O-Ring; (25.3mm Id) | 1 |
169-0836 Valve Gp-Control -Grapple Cylinder
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 12***43 | Seal-O-Ring | 1 |
| 12***45 | Seal-O-Ring; (25.3mm Id) | 1 |
157-2410 Valve Gp-Main Control -Eight Bank
| 15***10 | Valve Group-Main Control; -Eight Bank | 1 |
| 16***29 | Valve Group-Control; -Inlet | 1 |
| 16***30 | Valve Group-Control; -Steering Cylinder | 1 |
179-4424 Valve Gp-Main Control -Eight Bank
| 16***29 | Valve Group-Control; -Inlet | 1 |
| 16***30 | Valve Group-Control; -Steering Cylinder | 1 |
| 16***31 | Valve Group-Control; -Tilt, Gate Cylinder | 1 |
162-5703 Valve Gp-Pressure Reducing
| 16***03 | Valve Group-Pressure Reducing | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
| 7L***61 | Seal-O-Ring; (18.72mm Id) | 1 |
166-3662 Valve Gp-Priority -Steering
| 16***62 | Valve Group-Priority; -Steering | 1 |
| 17***40 | Plug | 1 |
| 17***42 | Plug-Orifice | 1 |
183-5936 Valve Gp-Pump Control
| 18***63 | Retainer | 2 |
| 18***21 | Washer-Spring | 2 |
| 18***29 | Housing As | 1 |
219-5197 Valve Gp-Solenoid -Transmission Low Speed, High Speed
| 17***77 | Coil | 2 |
| 21***97 | Valve Group-Solenoid; -Transmission Low Speed, High Speed | 1 |
| 22***61 | Nut | 2 |
171-2448 Valve Gp-Solenoid
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 17***48 | Valve Group-Solenoid | 1 |
| 19***58 | Seal-O-Ring | 1 |
149-2658 Valve Gp-Solenoid -Blade Lock
| 11***43 | Locknut; (5/16-18-Thd) | 1 |
| 14***11 | Cartridge Assem. | 1 |
| 14***58 | Valve Group-Solenoid; -Blade Lock | 1 |
165-2114 Valve Gp-Solenoid
| 16***54 | Seal-O-Ring | 4 |
| 16***14 | Valve Group-Solenoid | 1 |
| 16***80 | Valve-Directional | 1 |
152-8340 Valve Gp-Solenoid -Cold Start
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***43 | Locknut; (5/16-18-Thd) | 2 |
| 15***38 | Cartridge Assem. | 1 |
207-3120 Valve Gp-Solenoid & Manifold -Transmission Low Speed, High Speed
| 16***71 | Valve Group-Solenoid; (Diff Lock, Parking Bk, Ladder) | 1 |
| 16***87 | Manifold | 1 |
| 17***77 | Coil | 1 |
Implements
170-0861 Boom Gp
| 12***80 | Locknut; (M12x1.75-Thd) | 6 |
| 17***61 | Boom Group | 1 |
| 17***72 | Fitting | 4 |
178-0211 Stick Gp
| 11***93 | Lockwasher | 2 |
| 17***72 | Fitting | 5 |
| 17***48 | Bolt | 2 |
194-6497 Stick Gp
| 12***78 | Locknut; (M6x1-Thd) | 4 |
| 12***80 | Locknut; (M12x1.75-Thd) | 2 |
| 13***40 | Locknut; (M8x1.25-Thd) | 2 |
170-3260 Stick Gp
| 12***80 | Locknut; (M12x1.75-Thd) | 12 |
| 13***40 | Locknut; (M8x1.25-Thd) | 1 |
| 15***58 | Washer | 2 |
178-0509 Stick Gp
| 17***72 | Fitting | 2 |
| 17***48 | Bolt | 2 |
| 17***49 | Nut; (M65-Thd) | 1 |
170-0862 Stick Gp
| 12***80 | Locknut; (M12x1.75-Thd) | 4 |
| 16***97 | Nut | 4 |
| 17***62 | Stick Group | 1 |
177-9815 Stick Gp
| 11***93 | Lockwasher | 2 |
| 17***72 | Fitting | 5 |
| 17***48 | Bolt | 2 |
170-3094 Stick Gp
| 10***64 | Bolt-Socket Head; (M6x1x80-mm) | 2 |
| 12***80 | Locknut; (M12x1.75-Thd) | 12 |
| 13***40 | Locknut; (M8x1.25-Thd) | 1 |
206-2938 Support Gp-Boom
| 09***06 | Bolt-Socket Head; (M16x2x110mm) | 2 |
| 20***54 | Support As | 1 |
| 20***61 | Plate | 1 |
236-5740 Support Gp-Boom
| 19***72 | Plate As | 1 |
| 19***85 | Support As | 1 |
| 23***40 | Support Group-Boom | 1 |
169-8317 Support Gp-Boom
| 16***10 | Support As | 1 |
| 16***16 | Boss | 2 |
| 16***17 | Support Group-Boom | 1 |
205-9064 Support Gp-Boom
| 09***06 | Bolt-Socket Head; (M16x2x110mm) | 2 |
| 12***54 | Screw-Flat Head; (M12x1.75x35-mm) | 4 |
| 16***10 | Support As | 1 |
173-5836 Support Gp-Boom
| 16***15 | Boss As | 1 |
| 16***19 | Boss As | 1 |
| 17***36 | Support Group-Boom | 1 |
204-1128 Support Gp-Boom
| 10***86 | Boss; (M16x2x25-mm) | 2 |
| 20***44 | Plate As | 1 |
| 20***28 | Support Group-Boom | 1 |
194-7046 Support Gp-Boom
| 16***16 | Boss | 2 |
| 19***46 | Support Group-Boom | 1 |
| 19***72 | Plate As | 1 |
172-5448 Support Gp-Swing Boom
| 16***32 | Support As | 1 |
| 17***48 | Support Group-Swing Boom | 1 |
| 6V***76 | Nut-Lock; (M24 X 3.0) | 2 |
Lubrication System
139-3527 Breather Gp
| 13***27 | Breather Group | 1 |
| 2W***62 | Breather As-Crankcase; (Engine) | 1 |
| 4P***36 | Base | 1 |
4p-8183 Filter Gp-Engine Oil
| 1R***07 | Filter As-Engine Oil; (Advanced Efficiency) | 1 |
| 23***54 | Gasket | 1 |
| 24***64 | Spring; (Yoke) | 2 |
190-0108 Fumes Disposal Gp
| 19***08 | Fumes Disposal Group | 1 |
| 4D***88 | Clip-(Slot To Fit Fastener M10 Or 3/8) | 1 |
| 6V***39 | Washer-Hard-Alt Strap To Fan Drive Belt | 1 |
4p-1556 Fumes Disposal Gp
| 03***81 | Spacer; (9x16x25-mm Thk) | 1 |
| 4D***88 | Clip-(Slot To Fit Fastener M10 Or 3/8) | 1 |
| 4P***55 | Hose-Disposal; (Fumes Disposal) | 1 |
153-0453 Gauge Gp-Oil Level (Dipstick)
| 11***00 | Gauge-Oil Level (Dipstick); (Engine) | 1 |
| 13***54 | Bracket | 1 |
| 15***53 | Gauge Group-Oil Level (Dipstick) | 1 |
129-1133 Lines Gp-Engine Oil
| 12***32 | Tube As-Oil | 1 |
| 12***33 | Lines Group-Engine Oil | 1 |
| 3E***53 | Washer-Hard; (11x25x3-mm Thk) | 2 |
4p-7703 Lines Gp-Turbocharger Oil
| 11***19 | Tube As | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
| 1S***57 | Gasket; (Turbocharger-Oil Supply) | 1 |
115-4138 Pump Gp-Engine Oil
| 11***23 | Pump Group-Engine Oil | 1 |
| 11***38 | Pump Group-Engine Oil | 1 |
| 6V***15 | Bolt; (M10x1.5x75-mm) | 2 |
200-4497 Pump Gp-Engine Oil
| 18***77 | Pump Group-Engine Oil | 1 |
| 20***97 | Pump Group-Engine Oil | 1 |
| 7W***37 | Shaft-Oil Pump | 1 |
115-4123 Pump Gp-Engine Oil
| 10***05 | Spring | 1 |
| 11***74 | Shaft As | 1 |
| 11***16 | Shaft As-Idler | 1 |
2t-2951 Valve Gp-Fluid Sampling
| 2T***51 | Valve Group-Fluid Sampling; Manual Valve Group (Fluid Sampling) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
Machine Arrangement
163-8729 Chassis Ar
| 16***71 | Frame Group-Bogie Lift | 1 |
| 16***29 | Chassis Ar | 1 |
| 16***20 | Frame Group-Front | 1 |
163-8726 Common Ar
| 16***26 | Common Ar | 1 |
| 16***27 | Installation Ar-Engine | 1 |
| 16***28 | Power Train Ar | 1 |
Operator Station
184-4205 Air Conditioner Gp
| 16***74 | Valve-Expansion | 1 |
| 16***89 | Seal | 2 |
| 18***05 | Air Conditioner Group | 1 |
171-0734 Air Conditioner Gp
| 16***59 | Filter-Fresh Air | 2 |
| 16***60 | Insulation | 2 |
| 16***61 | Frame | 2 |
189-0618 Armrest Gp -Rh
| 18***18 | Armrest Group; -Rh | 1 |
| 18***38 | Washer | 1 |
| 18***39 | Spring-Gas | 1 |
201-9941 Armrest Gp -Rh
| 18***38 | Washer | 1 |
| 18***39 | Spring-Gas | 1 |
| 18***40 | Washer | 3 |
189-0619 Armrest Gp -Lh
| 18***19 | Armrest Group; -Lh | 1 |
| 18***38 | Washer | 1 |
| 18***39 | Spring-Gas | 1 |
201-9945 Armrest Gp -Lh
| 18***38 | Washer | 1 |
| 18***39 | Spring-Gas | 1 |
| 18***40 | Washer | 3 |
190-1380 Backrest Gp-Seat
| 16***03 | Nut; (M10x1.5-Thd) | 2 |
| 18***78 | Washer | 2 |
| 18***80 | Wheel-Adjustment | 2 |
189-0757 Backrest Gp-Seat
| 16***03 | Nut; (M10x1.5-Thd) | 2 |
| 18***57 | Backrest Group-Seat | 1 |
| 18***78 | Washer | 2 |
165-3619 Compressor Gp-Refrigerant
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***33 | Switch As-Pressure; (A/C) | 1 |
| 12***77 | Guard As-Compressor Pulley | 1 |
3e-1906 Compressor Gp-Refrigerant
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***69 | Valve Group-Relief; (Refrigerant Compressor) | 1 |
| 3E***06 | Compressor Group-Refrigerant | 1 |
198-8099 Condenser & Mtg Gp-Refrigerant
| 09***82 | Nut Self-Locking; (M8x1.25 Thd) | 4 |
| 19***99 | Condenser & Mtg Group-Refrigerant | 1 |
| 19***00 | Condenser Group-Refrigerant | 1 |
198-8100 Condenser Gp-Refrigerant
| 16***39 | Shroud | 1 |
| 16***41 | Support | 6 |
| 16***42 | Bracket | 3 |
160-5678 Condenser Gp-Refrigerant
| 16***78 | Condenser Group-Refrigerant | 1 |
| 16***91 | Relay | 1 |
| 16***34 | Relay | 1 |
183-9406 Condenser Gp-Refrigerant
| 14***47 | Film; (Identification) (24v) (On Outside Of Battery Compartment Door) | 1 |
| 16***30 | Tube | 1 |
| 16***37 | Plate As | 1 |
180-3602 Console & Mtg Gp-Operator
| 17***56 | Console Group-Front | 1 |
| 17***63 | Console Group-Rear | 1 |
| 17***95 | Screw; (M5x10.0-mm) | 7 |
207-3146 Console & Mtg Gp-Operator
| 17***56 | Console Group-Front | 1 |
| 17***95 | Screw; (M5x10.0-mm) | 7 |
| 20***46 | Console & Mtg Group-Operator | 1 |
160-5661 Console & Mtg Gp-Operator
| 13***54 | Screw-Truss Head; (M4x0.7x10-mm) | 4 |
| 16***61 | Console & Mtg Group-Operator | 1 |
| 16***03 | Console As-Front | 1 |
171-8656 Console Gp-Front
| 10***53 | Housing; (Center) | 5 |
| 10***54 | Housing; (End) | 4 |
| 10***56 | Plug; (Switch) | 2 |
207-3147 Console Gp-Rear
| 09***30 | Screw-Machine; (M4x0.07x6-mm) | 10 |
| 09***92 | Washer, Tooth | 6 |
| 09***17 | Screw-Machine; (M5x0.8x6-mm) | 13 |
171-8663 Console Gp-Rear
| 09***92 | Washer, Tooth | 6 |
| 09***17 | Screw-Machine; (M5x0.8x6-mm) | 9 |
| 10***81 | Screw-Truss Head | 6 |
184-4173 Console Gp-Side -Rear
| 10***53 | Housing; (Center) | 8 |
| 10***54 | Housing; (End) | 4 |
| 10***56 | Plug; (Switch) | 3 |
171-8658 Console Gp-Side -Front
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
184-4174 Console Gp-Side
| 14***47 | Film; (Identification) (24v) (On Outside Of Battery Compartment Door) | 1 |
| 15***49 | Converter-Power; (24-Volt To 12-Volt) | 1 |
| 17***58 | Console Group-Side; -Front | 1 |
171-8661 Console Gp-Side -Rear
| 10***53 | Housing; (Center) | 8 |
| 10***54 | Housing; (End) | 4 |
| 10***56 | Plug; (Switch) | 2 |
207-3150 Console Gp-Side
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***53 | Housing; (Center) | 8 |
| 10***54 | Housing; (End) | 4 |
207-3149 Console Gp-Side
| 14***47 | Film; (Identification) (24v) (On Outside Of Battery Compartment Door) | 1 |
| 15***49 | Converter-Power; (24-Volt To 12-Volt) | 1 |
| 17***58 | Console Group-Side; -Front | 1 |
171-8657 Console Gp-Side
| 14***47 | Film; (Identification) (24v) (On Outside Of Battery Compartment Door) | 1 |
| 16***48 | Channel As | 1 |
| 16***31 | Transformer | 1 |
215-1909 Control Gp-Blade
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 14***17 | Connector | 2 |
| 15***55 | Kit; (Connecting Plug) (12-Pin) (Includes Plug As Wedge & Interface Seal) | 1 |
168-4800 Control Gp-Handle
| 16***00 | Control Group-Handle | 1 |
| 17***09 | Pipe As | 1 |
| 17***10 | Pipe As | 1 |
167-7367 Control Gp-Joystick
| 13***54 | Screw-Truss Head; (M4x0.7x10-mm) | 5 |
| 16***67 | Control Group-Joystick | 1 |
| 16***00 | Control Group-Handle | 1 |
201-9944 Control Gp-Joystick
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
173-9221 Control Gp-Joystick -Lh
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***80 | Handle Group-Modular; (Joystick)(Boom Control) | 1 |
169-3025 Control Gp-Joystick
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 10***55 | Housing-Switch; (Lights) | 2 |
173-9220 Control Gp-Joystick -Rh
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***11 | Plug Kit; (Includes Plug Assem. And Wedge) | 1 |
160-5670 Control Gp-Steering
| 15***40 | Washer; (M10) | 4 |
| 16***70 | Control Group-Steering | 1 |
| 16***61 | Steering Wheel | 1 |
193-8088 Cover Gp-Cab
| 16***01 | Seal; (35m) | 0 |
| 17***78 | Plate As | 1 |
| 17***79 | Rod As | 1 |
201-9978 Door Gp-Cab
| 10***71 | Clevis | 2 |
| 11***87 | Striker Assem.; (7/16-14) | 1 |
| 12***26 | Shield-Striker | 1 |
160-5676 Door Gp-Cab
| 13***54 | Screw-Truss Head; (M4x0.7x10-mm) | 10 |
| 15***88 | Sheet | 1 |
| 15***89 | Strip | 1 |
183-9405 Door Gp-Cab
| 10***71 | Clevis | 2 |
| 11***87 | Striker Assem.; (7/16-14) | 1 |
| 12***26 | Shield-Striker | 1 |
160-5680 Duct Gp-Air
| 16***80 | Duct Group-Air | 1 |
| 16***01 | Grill | 2 |
| 16***03 | Connector | 3 |
201-9954 Fastener Gp-Rops
| 13***92 | Retainer-Captive | 1 |
| 20***54 | Fastener Group-Rops | 1 |
| 2V***15 | Nut-Speed | 1 |
165-3533 Horn Gp-Electric
| 16***30 | Horn | 1 |
| 16***33 | Horn Group-Electric | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 1 |
160-5662 Installation Gp-Radio
| 16***62 | Installation Group-Radio | 1 |
| 16***28 | Antenna | 1 |
| 16***41 | Antenna; (Phone) | 1 |
180-3603 Installation Gp-Radio
| 16***28 | Antenna | 1 |
| 16***41 | Antenna; (Phone) | 1 |
| 17***00 | Adapter | 1 |
160-5679 Liner Gp-Cab
| 16***79 | Liner Group-Cab | 1 |
| 16***32 | Insulation | 2 |
| 16***33 | Insulation | 1 |
183-9407 Liner Gp-Cab
| 06***39 | Screw | 12 |
| 16***71 | Screw | 11 |
| 17***77 | Handle | 1 |
160-5663 Lines Gp-Air Conditioner
| 10***84 | Bolt-Socket Head; (M10x1.5x25-mm) | 1 |
| 16***63 | Lines Group-Air Conditioner | 1 |
| 16***00 | Strip; (5.0m) | 1 |
165-5915 Lines Gp-Air Conditioner
| 16***70 | Clamp | 1 |
| 16***39 | Bracket As | 1 |
| 16***15 | Lines Group-Air Conditioner | 1 |
201-9984 Mirror Gp-Rear View
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 16***52 | Mirror | 2 |
| 20***63 | Arm As; (Lh) | 1 |
160-5665 Mirror Gp-Rear View
| 16***65 | Mirror Group-Rear View | 1 |
| 16***97 | Mirror | 2 |
| 16***69 | Bracket | 2 |
191-2094 Mirror Gp-Rear View
| 10***81 | Spacer; (13.5x17.5x12.4-mm Thk) | 4 |
| 16***22 | Screw-Button Head; (M8x1.25x30-mm) | 12 |
| 19***94 | Mirror Group-Rear View | 1 |
192-7104 Motor Gp-Window Wiper
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 5 |
| 19***04 | Motor Group-Window Wiper | 1 |
192-7129 Motor Gp-Window Wiper
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 5 |
| 19***29 | Motor Group-Window Wiper | 1 |
180-3601 Mounting Gp-Cab
| 16***46 | Mount-Flexible | 4 |
| 18***01 | Mounting Group-Cab | 1 |
| 19***69 | Pin As | 2 |
160-5672 Mounting Gp-Cab
| 16***72 | Mounting Group-Cab | 1 |
| 16***40 | Screw | 4 |
| 16***31 | Pin | 2 |
163-8731 Operator Ar-Enclosed Rops
| 16***60 | Wiper & Washer Group-Window; -(Front/Rear) | 1 |
| 16***61 | Console & Mtg Group-Operator | 1 |
| 16***62 | Installation Group-Radio | 1 |
180-3607 Operator Ar-Enclosed Rops
| 16***65 | Mirror Group-Rear View | 1 |
| 16***70 | Control Group-Steering | 1 |
| 16***71 | Lamp Group-Indicator; -Warning | 1 |
187-1920 Panel Gp-Front
| 09***20 | Knob | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 17***90 | Rod | 1 |
160-5668 Pedal Gp-Governor
| 16***68 | Pedal Group-Governor | 1 |
| 16***42 | Pedal As-Foot | 2 |
| 17***88 | Spacer; (6.5x12x10mm Thk) | 6 |
184-4210 Pedal Gp-Governor
| 16***42 | Pedal As-Foot | 2 |
| 18***10 | Pedal Group-Governor | 1 |
| 9X***43 | Screw; (Truss Head) (M6x1x14mm) | 6 |
180-3600 Rops Gp-Enclosed
| 16***63 | Lines Group-Air Conditioner | 1 |
| 16***64 | Lines Group-Heater | 1 |
| 16***80 | Duct Group-Air | 1 |
170-6556 Rops Gp-Enclosed
| 16***63 | Lines Group-Air Conditioner | 1 |
| 16***64 | Lines Group-Heater | 1 |
| 16***74 | Window Group-Cab | 1 |
167-7374 Seat Ar-Suspension
| 16***81 | Plate | 1 |
| 16***74 | Seat Ar-Suspension | 1 |
| 17***11 | Seat Group-Suspension | 1 |
167-7371 Seat Ar-Suspension -Air Vented
| 16***71 | Seat Ar-Suspension; -Air Vented | 1 |
| 17***14 | Seat Group-Suspension; (Air Vented) | 1 |
| 1S***94 | Clip-R.H. Side Engine Support | 6 |
167-7373 Seat Ar-Suspension
| 10***81 | Spacer; (13.5x17.5x12.4-mm Thk) | 4 |
| 16***81 | Plate | 1 |
| 16***73 | Seat Ar-Suspension | 1 |
167-7372 Seat Ar-Suspension
| 10***81 | Spacer; (13.5x17.5x12.4-mm Thk) | 4 |
| 16***81 | Plate | 1 |
| 16***72 | Seat Ar-Suspension | 1 |
167-7370 Seat Ar-Suspension -Standard
| 16***70 | Seat Ar-Suspension; -Standard | 1 |
| 17***15 | Seat Group-Suspension; (Standard) | 1 |
| 1S***94 | Clip-R.H. Side Engine Support | 6 |
177-0612 Seat Gp-Suspension -Cloth
| 17***05 | Plate As | 1 |
| 17***12 | Seat Group-Suspension; -Cloth | 1 |
| 18***15 | Cover-Seat | 1 |
177-0613 Seat Gp-Suspension -Cloth
| 17***05 | Plate As | 1 |
| 17***13 | Seat Group-Suspension; -Cloth | 1 |
| 18***16 | Seat Belt Group | 1 |
189-9242 Seat Gp-Suspension
| 18***14 | Cushion | 1 |
| 18***57 | Backrest Group-Seat | 1 |
| 18***60 | Fan | 1 |
190-1377 Seat Gp-Suspension
| 18***14 | Cushion | 1 |
| 18***53 | Kit-Adjuster | 1 |
| 18***55 | Suspension As | 1 |
201-9959 Support Gp-Seat Swivel
| 18***91 | Kit-Brake Band | 1 |
| 18***92 | Valve; (Rotation Lock) | 1 |
| 20***59 | Support Group-Seat Swivel | 1 |
189-9247 Support Gp-Seat Swivel
| 18***47 | Support Group-Seat Swivel | 1 |
| 18***91 | Kit-Brake Band | 1 |
| 18***92 | Valve; (Rotation Lock) | 1 |
165-3532 Tilt Gp-Cab
| 09***04 | Locknut; (M20x2.5-Thd) | 1 |
| 15***74 | Tube As | 1 |
| 15***76 | Bar As | 1 |
154-1874 Visor Gp-Cab
| 13***54 | Screw-Truss Head; (M4x0.7x10-mm) | 10 |
| 15***74 | Visor Group-Cab | 1 |
| 16***05 | Visor Group-Cab | 1 |
162-6005 Visor Gp-Cab
| 13***87 | Screw; (M4x0.7x12-mm) | 24 |
| 16***05 | Visor Group-Cab | 1 |
| 17***35 | Bracket | 6 |
195-7875 Visor Gp-Cab
| 17***35 | Bracket | 4 |
| 17***36 | Ring | 4 |
| 17***37 | Bracket | 6 |
192-5887 Visor Gp-Cab
| 09***56 | Screw-Machine; (M5x0.8x16-mm) | 3 |
| 19***87 | Visor Group-Cab | 1 |
| 19***90 | Visor-Sun | 1 |
183-9404 Window Gp-Cab
| 12***19 | Seal; (177-cm Each) | 4 |
| 17***53 | Frame As | 1 |
| 17***32 | Frame As | 1 |
201-9983 Window Gp-Cab
| 12***19 | Seal; (177-cm Each) | 4 |
| 16***22 | Screw-Button Head; (M8x1.25x30-mm) | 4 |
| 17***32 | Frame As | 1 |
160-5674 Window Gp-Cab
| 16***74 | Window Group-Cab | 1 |
| 16***84 | Connector | 4 |
| 16***81 | Cable; (1.0m) | 0 |
160-5660 Wiper & Washer Gp-Window -(Front/Rear)
| 14***95 | Hose; (650-cm Each) | 0 |
| 16***60 | Wiper & Washer Group-Window; -(Front/Rear) | 1 |
| 16***21 | Bracket | 2 |
187-1921 Wiper & Washer Gp-Window -(Front/Rear)
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
| 16***21 | Bracket | 2 |
167-7384 Wiper & Washer Gp-Window -(Lh/Rh)
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***95 | Hose; (650-cm Each) | 2 |
| 15***74 | Kit-Connecting Plug; (6-Pin)(Cat Electronic Display Harness) | 1 |
Power Train
183-5891 Actuator Gp-Pump
| 09***81 | Seal-O-Ring (Id=12.30mm) | 1 |
| 11***18 | Valve As | 2 |
| 13***62 | Lever As | 1 |
165-3543 Bogie & Mtg Gp-Front
| 12***38 | Bolt; (M24x3x500-mm) | 2 |
| 16***67 | Bogie Group-Front | 1 |
| 16***43 | Bogie & Mtg Group-Front | 1 |
165-3544 Bogie & Mtg Gp-Rear
| 12***38 | Bolt; (M24x3x500-mm) | 2 |
| 16***68 | Bogie Group-Rear | 1 |
| 16***44 | Bogie & Mtg Group-Rear | 1 |
220-4783 Bogie As
| 17***79 | Ring | 1 |
| 17***08 | Washer | 24 |
| 17***10 | Cover | 6 |
162-8467 Bogie Gp-Front
| 09***35 | Bolt-Socket Head; (M10x1.5x16-mm) | 2 |
| 15***58 | Washer | 4 |
| 16***67 | Bogie Group-Front | 1 |
199-7486 Bogie Gp-Front
| 17***85 | Cylinder Group-Brake | 2 |
| 17***86 | Disc | 12 |
| 17***87 | Disc | 12 |
220-4781 Bogie Gp-Front
| 17***79 | Ring | 1 |
| 17***08 | Washer | 24 |
| 17***10 | Cover | 6 |
220-4780 Bogie Gp-Front -Lh
| 17***79 | Ring | 1 |
| 17***08 | Washer | 24 |
| 17***10 | Cover | 6 |
162-8468 Bogie Gp-Rear
| 16***68 | Bogie Group-Rear | 1 |
| 17***71 | Shaft | 2 |
| 17***82 | Washer | 2 |
200-0935 Bogie Gp-Rear
| 17***85 | Cylinder Group-Brake | 2 |
| 17***86 | Disc | 12 |
| 17***87 | Disc | 12 |
220-4784 Bogie Gp-Rear
| 17***79 | Ring | 2 |
| 17***08 | Washer | 24 |
| 17***10 | Cover | 6 |
160-5669 Control Gp-Brake
| 16***69 | Control Group-Brake | 1 |
| 16***76 | Clamp As | 3 |
| 16***94 | Clamp As | 2 |
180-3606 Control Gp-Brake
| 16***94 | Clamp As | 2 |
| 16***93 | Clamp-Hose | 3 |
| 16***28 | Accumulator; (Brake) | 2 |
183-5886 Cover Gp-Pump
| 09***80 | Pin | 2 |
| 09***14 | Pin; (Spring) | 1 |
| 18***86 | Cover Group-Pump | 1 |
170-5085 Cylinder Gp-Brake
| 15***58 | Washer | 4 |
| 17***85 | Cylinder Group-Brake | 1 |
| 17***95 | Cap | 1 |
225-2301 Cylinder Gp-Gearshift
| 09***19 | Ring-Retaining | 1 |
| 17***17 | Seal | 1 |
| 20***16 | Seal-O-Ring | 1 |
220-4779 Differential & Bevel Gear Gp
| 09***35 | Bolt-Socket Head; (M10x1.5x16-mm) | 2 |
| 17***15 | Cage | 1 |
| 17***16 | Spider | 1 |
220-4775 Differential & Bevel Gear Gp
| 09***35 | Bolt-Socket Head; (M10x1.5x16-mm) | 2 |
| 17***15 | Cage | 1 |
| 17***16 | Spider | 1 |
165-4890 Drive & Mtg Gp-Pump
| 16***55 | Drive Group-Pump | 1 |
| 16***90 | Drive & Mtg Group-Pump | 1 |
| 20***10 | Flange | 1 |
202-2152 Drive Gp-Pump
| 1L***62 | Bolt; (3/8-24x1.5-In) | 8 |
| 20***10 | Flange | 1 |
| 20***52 | Drive Group-Pump | 1 |
118-6656 Filter Gp-Oil
| 11***56 | Filter Group-Oil; -Power Train Charging | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
| 7X***49 | Switch As-Pressure; (Oil Filter Bypass) | 1 |
165-6901 Lines Gp-Diff Lock & Park Bk
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***93 | Clamp-Hose | 2 |
| 16***30 | Plate | 2 |
194-5410 Lines Gp-Diff Lock & Park Bk
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***40 | Hose As | 1 |
165-3539 Lines Gp-Power Train Oil
| 11***56 | Filter Group-Oil; -Power Train Charging | 1 |
| 16***67 | Carrier | 2 |
| 16***73 | Sensor-Temperature; (Transmission Gearbox Oil) | 1 |
165-3541 Lines Gp-Transmission Oil
| 11***56 | Filter Group-Oil; -Power Train Charging | 1 |
| 16***10 | Accumulator; (Transmission Gearbox) | 1 |
| 16***73 | Sensor-Temperature; (Transmission Gearbox Oil) | 1 |
202-2094 Lines Gp-Transmission Oil
| 11***95 | Plug As | 2 |
| 11***56 | Filter Group-Oil; -Power Train Charging | 1 |
| 12***88 | Flange-Split | 8 |
209-8745 Lines Gp-Transmission Oil
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***83 | Connector | 2 |
| 16***12 | Hose As | 2 |
165-3537 Motor & Mtg Gp-Propel
| 16***06 | Gear | 1 |
| 16***16 | Fitting | 1 |
| 16***17 | Flange | 1 |
202-2093 Motor & Mtg Gp-Propel -Two Speed
| 10***00 | Seal-O-Ring | 1 |
| 20***93 | Motor & Mtg Group-Propel; -Two Speed | 1 |
| 20***95 | Motor Group-Piston; -Propel | 1 |
162-6806 Motor Gp-Piston -Power Train
| 06***40 | Seal-O-Ring (Id=37.69mm) | 2 |
| 09***16 | Setscrew-Socket; (M12x1.75x12-mm) | 2 |
| 09***47 | Pin, Dowel | 1 |
209-7195 Motor Gp-Piston -Propel
| 09***92 | Seal-O-Ring (Id=23.70mm) | 3 |
| 10***48 | Valve Group-Shuttle; (Piston Motor) | 1 |
| 10***86 | Seal-O-Ring | 1 |
202-2151 Mounting Gp-Transmission
| 19***61 | Bracket | 1 |
| 19***06 | Bracket | 2 |
| 20***51 | Mounting Group-Transmission | 1 |
165-3545 Mounting Gp-Transmission
| 16***66 | Bracket | 2 |
| 16***67 | Bushing | 2 |
| 16***11 | Bushing | 2 |
220-4782 Planetary Gp-Final Drive
| 16***81 | Shim Group | 1 |
| 16***82 | Nut | 1 |
| 16***14 | Nut | 12 |
220-4778 Planetary Gp-Final Drive
| 16***81 | Shim Group | 1 |
| 16***82 | Nut | 1 |
| 16***14 | Nut | 12 |
209-8744 Power Train Ar
| 16***43 | Bogie & Mtg Group-Front | 1 |
| 16***44 | Bogie & Mtg Group-Rear | 1 |
| 20***92 | Pump & Mtg Group-Pow Trn & Impl | 1 |
163-8728 Power Train Ar
| 16***28 | Power Train Ar | 1 |
| 16***36 | Pump & Mtg Group-Pow Trn & Impl | 1 |
| 16***37 | Motor & Mtg Group-Propel | 1 |
165-3536 Pump & Mtg Gp-Pow Trn & Impl
| 09***70 | Bolt-Socket Hd; (M12 X 1.75 X 45) | 4 |
| 15***81 | Pump Group-Piston; -Power Train, Implement | 1 |
| 16***53 | Tube As | 1 |
202-2092 Pump & Mtg Gp-Pow Trn & Impl
| 11***04 | Bolt-Socket Head; (M12x1.75x45-mm) | 4 |
| 16***98 | Seal-O-Ring | 1 |
| 20***92 | Pump & Mtg Group-Pow Trn & Impl | 1 |
183-5873 Pump Gp-Charge
| 18***31 | Ring | 2 |
| 18***41 | Bearing; (Needle) | 2 |
| 18***42 | Sleeve | 2 |
164-3656 Pump Gp-Gear -Transmission Gearbox
| 09***94 | Ring-Retaining | 1 |
| 0S***08 | Bolt-Support To Starting Engine Timing Gear Housing | 4 |
| 13***87 | Locknut | 1 |
164-3655 Pump Gp-Gear -Transmission Gearbox
| 12***62 | Gear (50 Teeth) | 1 |
| 16***55 | Pump Group-Gear; -Transmission Gearbox | 1 |
| 16***56 | Pump Group-Gear; -Transmission Gearbox | 1 |
155-9915 Pump Gp-Piston -Power Train
| 00***92 | Seal-O-Ring | 1 |
| 00***02 | Cone-Roller Bearing | 1 |
| 01***96 | Coupling | 1 |
157-5281 Pump Gp-Piston -Power Train, Implement
| 15***15 | Pump Group-Piston; -Power Train | 1 |
| 15***25 | Pump Group-Piston | 1 |
| 15***81 | Pump Group-Piston; -Power Train, Implement | 1 |
183-5853 Rotating Gp-Motor
| 18***53 | Rotating Group-Motor | 1 |
| 5W***66 | Piston | 7 |
| 5W***69 | Washer-Backup | 7 |
194-5409 Shaft Gp-Drive -Long
| 11***45 | Nut; (M10x1.0-Thd) | 16 |
| 16***72 | Carrier | 1 |
| 16***51 | Nut | 40 |
211-0907 Shaft Gp-Drive
| 11***45 | Nut; (M10x1.0-Thd) | 16 |
| 16***67 | Shaft Group-Drive | 1 |
| 16***72 | Carrier | 1 |
211-0200 Shaft Gp-Drive
| 18***94 | Flange | 2 |
| 18***96 | Spider & Bearing Group | 1 |
| 19***18 | Shaft-Drive | 1 |
165-3542 Shaft Gp-Drive
| 11***45 | Nut; (M10x1.0-Thd) | 8 |
| 16***67 | Shaft Group-Drive | 1 |
| 16***80 | Spacer | 1 |
161-4667 Shaft Gp-Drive
| 16***67 | Shaft Group-Drive | 1 |
| 18***94 | Flange | 1 |
| 18***96 | Spider & Bearing Group | 2 |
162-5879 Shaft Gp-Drive -Center, Rear
| 16***79 | Shaft Group-Drive; -Center, Rear | 1 |
| 18***19 | Flange | 2 |
| 18***20 | Bearing-Pillow Block | 2 |
164-2307 Shaft Gp-Drive -Front
| 16***07 | Shaft Group-Drive; -Front | 1 |
| 18***94 | Flange | 2 |
| 18***96 | Spider & Bearing Group | 2 |
194-7569 Shaft Gp-Drive -Rear
| 18***94 | Flange | 1 |
| 18***95 | Flange | 1 |
| 18***96 | Spider & Bearing Group | 2 |
188-0268 Shaft Gp-Drive -Rear
| 18***68 | Shaft Group-Drive; -Rear | 1 |
| 18***94 | Flange | 1 |
| 18***95 | Flange | 1 |
168-0385 Shaft Gp-Drive
| 11***45 | Nut; (M10x1.0-Thd) | 16 |
| 16***72 | Carrier | 1 |
| 16***51 | Nut | 40 |
211-0906 Shaft Gp-Drive
| 11***45 | Nut; (M10x1.0-Thd) | 16 |
| 16***51 | Nut | 38 |
| 16***79 | Shaft Group-Drive; -Center, Rear | 1 |
183-5883 Swashplate Gp -Variable
| 11***02 | Pin | 4 |
| 18***43 | Clip | 2 |
| 18***46 | Seal | 4 |
198-7363 Tire & Rim Ar
| 19***54 | Tire & Rim Group | 8 |
| 19***63 | Tire & Rim Ar | 1 |
228-7746 Tire & Rim Ar
| 22***69 | Tire & Rim Group | 8 |
| 22***46 | Tire & Rim Ar | 1 |
228-7751 Tire & Rim Ar
| 22***72 | Tire & Rim Group | 8 |
| 22***51 | Tire & Rim Ar | 1 |
228-7756 Tire & Rim Ar
| 22***74 | Tire & Rim Group | 8 |
| 22***56 | Tire & Rim Ar | 1 |
228-7748 Tire & Rim Ar
| 22***70 | Tire & Rim Group | 8 |
| 22***48 | Tire & Rim Ar | 1 |
200-6336 Tire & Rim Gp
| 15***23 | Cap-Pipe | 1 |
| 19***35 | Rim As | 1 |
| 20***36 | Tire & Rim Group | 1 |
228-7574 Tire & Rim Gp
| 15***23 | Cap-Pipe | 1 |
| 17***00 | Rim As | 1 |
| 22***74 | Tire & Rim Group | 1 |
198-7354 Tire & Rim Gp
| 15***23 | Cap-Pipe | 1 |
| 17***00 | Rim As | 1 |
| 19***54 | Tire & Rim Group | 1 |
168-0313 Tire & Rim Gp
| 15***23 | Cap-Pipe | 1 |
| 16***13 | Tire & Rim Group | 1 |
| 19***35 | Rim As | 1 |
168-0315 Tire & Rim Gp
| 15***23 | Cap-Pipe | 1 |
| 16***15 | Tire & Rim Group | 1 |
| 19***35 | Rim As | 1 |
228-7572 Tire & Rim Gp
| 15***23 | Cap-Pipe | 1 |
| 17***00 | Rim As | 1 |
| 22***72 | Tire & Rim Group | 1 |
168-0323 Tire & Rim Gp
| 15***23 | Cap-Pipe | 1 |
| 16***23 | Tire & Rim Group | 1 |
| 17***00 | Rim As | 1 |
168-0321 Tire & Rim Gp
| 15***23 | Cap-Pipe | 1 |
| 16***21 | Tire & Rim Group | 1 |
| 17***00 | Rim As | 1 |
228-7569 Tire & Rim Gp
| 15***23 | Cap-Pipe | 1 |
| 19***35 | Rim As | 1 |
| 22***69 | Tire & Rim Group | 1 |
228-7570 Tire & Rim Gp
| 15***23 | Cap-Pipe | 1 |
| 19***35 | Rim As | 1 |
| 22***70 | Tire & Rim Group | 1 |
198-7357 Tire & Rim Gp
| 15***23 | Cap-Pipe | 1 |
| 19***35 | Rim As | 1 |
| 19***57 | Tire & Rim Group | 1 |
202-2097 Transmission Ar
| 11***06 | Plug As | 1 |
| 13***07 | Bearing As-Tapered Roller | 1 |
| 15***58 | Washer | 14 |
165-3540 Transmission Ar
| 13***53 | Plug | 1 |
| 16***12 | Transmission Ar; -Gearbox | 1 |
| 16***14 | Pipe | 1 |
161-4712 Transmission Ar -Gearbox
| 09***81 | Shim; (2-mm Thk) | 2 |
| 09***82 | Shim; (1.5-mm Thk) | 2 |
| 09***83 | Shim; (1.1-mm Thk) | 2 |
175-1807 Transmission Ar -Gearbox
| 09***81 | Shim; (2-mm Thk) | 2 |
| 09***82 | Shim; (1.5-mm Thk) | 2 |
| 09***83 | Shim; (1.1-mm Thk) | 2 |
224-8176 Valve Gp-Motor Control -Front-Propel
224-8193 Valve Gp-Motor Control -Rear-Propel
| 09***60 | Setscrew-Socket; (M6x1x6-mm) | 1 |
| 11***32 | Bolt-Hex Head; (8x1.25x30 mm) | 4 |
| 11***66 | Seal-O-Ring | 1 |
183-5865 Valve Gp-Pressure Control -Piston Motor
| 13***55 | Plug | 1 |
| 13***56 | Ring-Retaining | 1 |
| 13***57 | Piston | 1 |
183-5895 Valve Gp-Relief -Cold Oil Bypass
| 09***81 | Seal-O-Ring (Id=12.30mm) | 1 |
| 18***34 | Spring | 1 |
| 18***95 | Valve Group-Relief; -Cold Oil Bypass | 1 |
183-5897 Valve Gp-Relief -Purge
| 13***18 | Plug | 1 |
| 13***20 | Plug-Orifice | 1 |
| 18***33 | Spring | 1 |
183-5896 Valve Gp-Relief -Charge System
| 09***81 | Seal-O-Ring (Id=12.30mm) | 1 |
| 13***19 | Spring | 1 |
| 18***96 | Valve Group-Relief; -Charge System | 1 |
183-5899 Valve Gp-Relief
| 18***99 | Valve Group-Relief | 1 |
| 5P***99 | Seal-O-Ring | 1 |
| 8T***24 | Seal-O-Ring | 1 |
222-5769 Valve Gp-Relief
| 19***15 | Seal-O-Ring | 1 |
| 22***69 | Valve Group-Relief; -Main-Propel Motor | 1 |
| 22***92 | Spring | 1 |
Service Equipment And Supplies
169-2757 Film Gp
| 16***57 | Film Group | 1 |
| 17***04 | Film | 2 |
| 3E***93 | Film-Stripe; (Rear)(410 cm) | 0 |
176-0928 Film Gp
| 17***04 | Film-Warning; (Stay Clear) | 2 |
| 17***28 | Film Group | 1 |
6v-1970 Literature Gp
| 5P***58 | Sleeve; (Cable Splice) | 1 |
| 5P***00 | Key Total 2 Pieces Per Unit; (Literature Compartment) | 2 |
| 6V***70 | Literature Group; (Literature Compartment) | 1 |
169-2708 Plate & Film Gp
| 10***42 | Film-Instruction; (Alternate Exit) | 1 |
| 10***22 | Film-Instruction; (Hydraulic Oil Level) | 1 |
| 11***95 | Film-Instruction; (Air Conditioner) | 1 |
165-5017 Tool Gp-Hand
| 16***49 | Wrench; (25mm) | 1 |
| 16***52 | Wrench; (27mm) | 1 |
| 16***58 | Wrench As | 1 |
Work Tools
215-1907 Blade Ar
| 21***07 | Blade Ar | 1 |
| 21***08 | Frame & Mtg Group-Blade | 1 |
| 21***09 | Control Group-Blade | 1 |
174-4805 Damper Gp-Grapple
| 15***52 | Bushing | 2 |
| 17***59 | Damper Group-Grapple | 1 |
| 17***05 | Damper Group-Grapple | 1 |
189-5771 Damper Gp-Grapple
| 15***43 | Washer | 1 |
| 15***44 | Nut | 1 |
| 15***47 | Block As-Brake | 2 |
189-5573 Damper Gp-Grapple
| 18***73 | Damper Group-Grapple | 1 |
| 18***71 | Damper Group-Grapple | 1 |
| 20***58 | Bushing | 2 |
170-2159 Damper Gp-Grapple
| 15***43 | Washer | 1 |
| 15***44 | Nut | 1 |
| 15***47 | Block As-Brake | 2 |
215-1908 Frame & Mtg Gp-Blade
| 09***41 | Ring-Retaining | 4 |
| 16***22 | Chain; (.5m Ea) | 2 |
| 21***95 | Hook As | 1 |
167-7368 Gate Ar -Manual
| 10***56 | Plug; (Switch) | 1 |
| 16***96 | Gate Group; -Manual | 1 |
| 16***68 | Gate Ar; -Manual | 1 |
194-5416 Gate Ar -Manual
| 10***56 | Plug; (Switch) | 1 |
| 19***16 | Gate Ar; -Manual | 1 |
| 19***59 | Gate Group; -Manual | 1 |
167-7369 Gate Ar -Hydraulic
| 16***59 | Gate Group; -Hydraulic | 1 |
| 16***69 | Gate Ar; -Hydraulic | 1 |
| 16***24 | Control & Lines Group-Gate | 1 |
161-5959 Gate Gp -Hydraulic
| 13***73 | Screw-Flat Head; (M10x1.5x25-mm) | 8 |
| 16***24 | Chain; (.58m) | 0 |
| 16***62 | Bracket | 2 |
194-6959 Gate Gp -Manual
| 15***49 | Screw-Flat Head; (M10x1.5x25-mm) | 8 |
| 16***24 | Chain; (.58m) | 2 |
| 16***16 | Hose; (.51m) | 2 |
166-6996 Gate Gp -Manual
| 13***73 | Screw-Flat Head; (M10x1.5x25-mm) | 8 |
| 16***24 | Chain; (.58m) | 0 |
| 16***61 | Stake | 2 |
168-4618 Grapple Gp
| 12***80 | Locknut; (M12x1.75-Thd) | 3 |
| 16***18 | Grapple Group | 1 |
| 17***72 | Fitting | 4 |
197-3819 Loader Ar-Log
| 16***16 | Valve & Mtg Group-Log Loader | 1 |
| 16***19 | Lines Group-Boom Control | 1 |
| 16***20 | Rotator Group-Hydraulic; -Grapple | 1 |
167-7364 Loader Ar-Log
| 16***64 | Loader Ar-Log | 1 |
| 16***16 | Valve & Mtg Group-Log Loader | 1 |
| 16***18 | Grapple Group | 1 |
194-7017 Loader Ar-Log
| 16***16 | Valve & Mtg Group-Log Loader | 1 |
| 16***18 | Grapple Group | 1 |
| 16***20 | Rotator Group-Hydraulic; -Grapple | 1 |
206-5022 Loader Ar-Log
| 16***16 | Valve & Mtg Group-Log Loader | 1 |
| 16***18 | Grapple Group | 1 |
| 16***20 | Rotator Group-Hydraulic; -Grapple | 1 |
194-7018 Loader Ar-Log
| 16***16 | Valve & Mtg Group-Log Loader | 1 |
| 16***18 | Grapple Group | 1 |
| 16***20 | Rotator Group-Hydraulic; -Grapple | 1 |
206-6217 Loader Ar-Log
| 16***16 | Valve & Mtg Group-Log Loader | 1 |
| 16***19 | Lines Group-Boom Control | 1 |
| 16***20 | Rotator Group-Hydraulic; -Grapple | 1 |
167-7362 Loader Ar-Log
| 16***62 | Loader Ar-Log | 1 |
| 16***16 | Valve & Mtg Group-Log Loader | 1 |
| 16***17 | Loader Group-Log | 1 |
206-5082 Loader Ar-Log
| 16***16 | Valve & Mtg Group-Log Loader | 1 |
| 16***18 | Grapple Group | 1 |
| 16***20 | Rotator Group-Hydraulic; -Grapple | 1 |
194-7016 Loader Ar-Log
| 16***16 | Valve & Mtg Group-Log Loader | 1 |
| 16***18 | Grapple Group | 1 |
| 16***20 | Rotator Group-Hydraulic; -Grapple | 1 |
206-5081 Loader Ar-Log
| 16***16 | Valve & Mtg Group-Log Loader | 1 |
| 16***18 | Grapple Group | 1 |
| 16***20 | Rotator Group-Hydraulic; -Grapple | 1 |
167-7363 Loader Ar-Log
| 16***63 | Loader Ar-Log | 1 |
| 16***16 | Valve & Mtg Group-Log Loader | 1 |
| 16***18 | Grapple Group | 1 |
166-7133 Loader Ar-Log
| 16***33 | Loader Ar-Log | 1 |
| 16***16 | Valve & Mtg Group-Log Loader | 1 |
| 16***19 | Lines Group-Boom Control | 1 |
215-6505 Loader Ar-Log
| 16***16 | Valve & Mtg Group-Log Loader | 1 |
| 16***20 | Rotator Group-Hydraulic; -Grapple | 1 |
| 19***05 | Loader Group-Log | 1 |
194-5103 Loader Gp-Log
| 17***61 | Boom Group | 1 |
| 17***23 | Cylinder Group-Stick | 1 |
| 17***24 | Pillar Group-Log Loader | 1 |
179-6574 Loader Gp-Log
| 17***60 | Pillar Group-Log Loader | 1 |
| 17***61 | Boom Group | 1 |
| 17***06 | Cylinder Group-Lift | 1 |
194-5105 Loader Gp-Log
| 17***61 | Boom Group | 1 |
| 17***23 | Cylinder Group-Stick | 1 |
| 17***97 | Cylinder Group-Extendable Stick | 1 |
168-4617 Loader Gp-Log
| 16***17 | Loader Group-Log | 1 |
| 17***60 | Pillar Group-Log Loader | 1 |
| 17***61 | Boom Group | 1 |
168-4621 Loader Gp-Log
| 16***21 | Loader Group-Log | 1 |
| 17***60 | Pillar Group-Log Loader | 1 |
| 17***61 | Boom Group | 1 |
168-4622 Loader Gp-Log
| 16***22 | Loader Group-Log | 1 |
| 17***60 | Pillar Group-Log Loader | 1 |
| 17***61 | Boom Group | 1 |
179-6569 Loader Gp-Log
| 17***60 | Pillar Group-Log Loader | 1 |
| 17***61 | Boom Group | 1 |
| 17***06 | Cylinder Group-Lift | 1 |
179-6568 Loader Gp-Log
| 17***60 | Pillar Group-Log Loader | 1 |
| 17***61 | Boom Group | 1 |
| 17***06 | Cylinder Group-Lift | 1 |
194-5104 Loader Gp-Log
| 17***61 | Boom Group | 1 |
| 17***23 | Cylinder Group-Stick | 1 |
| 17***92 | Cylinder Group-Extendable Stick | 1 |
176-3924 Pillar Gp-Log Loader
| 11***93 | Lockwasher | 4 |
| 17***70 | Bushing | 1 |
| 17***72 | Fitting | 3 |
170-0860 Pillar Gp-Log Loader
| 08***69 | Bolt-Socket Head; (M10x1.5x130-mm) | 4 |
| 09***49 | Bolt; (M8x1.25x40-mm) | 1 |
| 11***93 | Lockwasher | 4 |
174-4806 Rotator Gp-Hydraulic -Grapple
| 17***06 | Rotator Group-Hydraulic; -Grapple | 1 |
| 17***07 | Rotator Group-Hydraulic; -Grapple | 1 |
| 17***08 | Kit-Adapter | 1 |
168-4620 Rotator Gp-Hydraulic -Grapple
| 16***20 | Rotator Group-Hydraulic; -Grapple | 1 |
| 17***06 | Rotator Group-Hydraulic; -Grapple | 1 |
| 18***73 | Damper Group-Grapple | 1 |
174-4807 Rotator Gp-Hydraulic -Grapple
| 12***76 | Bolt; (M10x1.5x130-mm) | 10 |
| 15***59 | Spring | 12 |
| 15***61 | Pin-Roll | 2 |
574 serial number reference
The PIN plate on a 574 Forwarder is mounted on the machine frame, typically near the base of the cab or on the main frame rail close to the operator's step - check both sides of the chassis if not visible immediately. Read the first three characters as the serial number prefix (identifies the specific machine/engine build series), followed by a five-digit sequence number unique to that individual unit within the prefix range.
| Prefix | Identifies | Notes |
|---|---|---|
| 1FM | 574 Forwarder - 8-wheel-drive forest products forwarder, single production PIN series (S/N 1FM00001-UP) | Covers the full 574 Forwarder line, including the MTS clambunk configuration listed under the same prefix in the parts catalog. Factory literature ties this prefix to the Cat 3126 (3126 DITA) diesel. A later catalog edition for this same prefix is marketed as a Tier 3 parts catalog, and current-production 574 spec sheets show a Cat C6.6 ACERT engine, so the exact serial point where engine coverage shifts from 3126 to C6.6 ACERT within the 1FM range is not documented in available sources - confirm engine fitment against your specific PIN with a dealer. No second, distinct prefix for a redesigned or later-generation 574 was found. Note the similarly-numbered '574B' forwarder belongs to a different manufacturer entirely, not a Caterpillar generation. |
Frequently asked questions
What engine does the Cat 574 forwarder use?
It depends on the production era. Early 574 forwarders, carrying the 1FM serial prefix and built roughly 1999-2003, run the Cat 3126 diesel. Later and current-production 574 forwarders run the Cat C6.6 ACERT, a Tier 3 application without a DPF or active regen cycle. Both are turbocharged inline-6 diesels rated near 173 hp (129 kW) gross. Confirm which engine is fitted against the machine's serial number and engine tag before ordering parts, since filters, injectors, and service intervals differ between the two.
What is the operating weight of the Cat 574 forwarder?
Operating weight runs 16.8-17.2 t (37,000-38,000 lb) on the standard 8-wheel-drive chassis, varying by source and build spec. Load capacity is rated near 14.5 t (32,000 lb) on the standard wood bunk, dropping to roughly 11.8-14 t (26,000-30,800 lb) with the optional clam-shell bunk fitted.
What replaced the Cat 574 forwarder?
No single model is documented as a direct replacement. The 574 sits between the smaller 564 and the larger 584/584HD in Cat's forwarder range, and Caterpillar appears to have updated the machine in place, moving from the 3126 diesel and hydrostatic/mechanical drivetrain to the C6.6 ACERT engine and torque-converter power-shift transmission, while keeping the 574 designation rather than issuing a new model number.
What 574 owners discuss
Does every Cat 574 forwarder have the same engine?
No. Two distinct generations run under the 574 name. Earlier machines (roughly the 1999-2003 build range) are built around the Cat 3126 diesel. The later generation, which followed Caterpillar's acquisition of the Fabtek/Blount forestry line and is the version most commonly traded today, pairs with a Cat C6.6 ACERT rated near 129 kW (173 hp) gross - the same engine family fitted to the narrower 564 forwarder on the same platform. Filters, injectors, and service intervals differ between the two, so match parts to the actual engine tag rather than assuming by model number. Have your dealer verify the engine serial and rating plate before ordering major components.
Is the C6.6 ACERT in the 574 a Tier 4 unit with DPF regen headaches?
The 574's C6.6 ACERT is documented as a Tier 3 application - a mechanically simpler ACERT calibration without the diesel particulate filter and active regen cycle that later Tier 4 versions of the same base engine carry in other equipment. Owners should not expect regen-related derates or ash-service intervals typical of Tier 4 machines. What does show up across the C6.6 ACERT family generally is HEUI injector wear that shows as rough idle or gradual power loss over time, so fuel quality and filter discipline matter more than aftertreatment maintenance on this engine.
What hydraulic behavior is normal versus a warning sign on the 574?
The 574 runs a hydrostatic/mechanical drive with electric power shift and roughly 66 gal/min (250 L/min) pump flow feeding a 121 L (32 gal) reservoir. Smooth, quiet operation at working temperature is normal. Cavitation-type whine or clicking from the pump points to wear or aeration in the circuit and should be checked before it takes out the pump. Run the machine to full operating temperature, shut down, and inspect the crane cylinders, swivel joints, and hose fittings for weeping or fresh drips - these are the most common leak points reported on forwarders of this size and load class.
What wears fastest on the 574's running gear?
The 574 is an 8-wheel-drive tandem-bogie machine, not a tracked carrier, so wear concentrates in bogie wheel bearings and tires rather than track chain. Standard fitment is 700/50-26.5 (16PR), with 800/50x26.5 offered as an option. Running mismatched tire and chain or band-track combinations across the bogie set is a known cause of accelerated drivetrain and bearing wear - all eight wheels should carry matching chains or matching band tracks, never a mix. Correct tire pressure is the single biggest lever operators have: underinflation cooks the sidewall and bead, overinflation increases impact damage risk, and band-track use calls for pressure near the top of the recommended range.
Are there known electrical or sensor quirks with the ACERT-generation 574?
The C6.6 ACERT's electronic governor leans on coolant temperature, throttle position, and engine speed/timing sensors to manage output, and a fault on any of these can trigger an ECM-programmed derate - reduced rated power, reduced rated speed, or both - rather than an outright shutdown. Operators sometimes read a sudden loss of power or top speed as a mechanical problem when it is actually a sensor fault code. Pull the ECM fault history before chasing a mechanical cause. Because a derate is a built-in protection strategy, confirming the actual fault code and root cause is safety-relevant if it's masking a real overheating or fuel-delivery issue - have your dealer verify the code and root cause before returning the machine to full load work.
What about the crane and grapple - what wears there?
The 574 carries Caterpillar's own loader unit on the F-series crane line, and like any knuckleboom loader the wear points are the boom base pivot pin, the lift and extend cylinder pins, and their bushings. Elongation of the pin bore into or through the bushing is the classic tell of a hard-worked machine. Cycle the crane under load and watch each pin joint individually for visible play rather than judging by ear alone; a boom and grapple with no detectable movement in the pins is a strong positive sign on an inspection. Because loader pin and bushing failure is a load-bearing safety issue, have your dealer verify pin/bushing wear against factory tolerance before returning a marginal joint to service.
What should I check before buying a used Cat 574?
Start by confirming which engine generation is fitted - Cat 3126 or C6.6 ACERT - since that drives parts availability and service cost going forward, and pull the ECM fault history on ACERT-equipped units for past derate events. Run the machine to full operating temperature and check the hydraulic circuit, crane cylinders, and swivel fittings for leaks, and cycle the crane under load checking each pin and bushing for play. Inspect bogie wheel bearings for play and confirm tires or band tracks are matched in type and wear across all eight wheels rather than mixed. Ask for service and oil-sample records rather than relying on hour meter alone, since hours on a forwarder correlate loosely with wear depending on terrain and load history. Have your dealer verify engine and drivetrain condition with a full inspection before final purchase, especially on any machine with undocumented service history.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 574 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.