Caterpillarwheel-type skidderwheel skidder
Caterpillar 545
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 545 is a wheel-type skidder built for cable and grapple log skidding in production forestry, sitting in Cat's large-class wheel skidder line above the 525/535 pair. Power comes from the Cat 3306 DITA, a 10.5 L mechanical inline-six diesel rated 168 kW (225 hp) gross and 149 kW (200 hp) net, driving a 5-speed forward/3-speed reverse countershaft powershift transmission through a single-stage torque converter with lockup. Operating weight runs roughly 39,900 to 40,200 lb (about 18,100-18,200 kg) depending on cable-arch or grapple configuration, with some fully optioned spec sheets - enclosed ROPS cab, winch, larger tires - listing weights up toward 44,600 lb (20,230 kg). The 545 followed Caterpillar's earlier 518 and 528 skidders as the company built out a dedicated large wheel-skidder platform, and it was itself succeeded by the ACERT-engine 545C and later the 545D. Cat offered the 545 as a cable-arch skidder for log-length and whole-tree dragging and as a grapple skidder with a dual-function arch, built on an articulated frame with hydraulically engaged differential locks on both front and rear axles.
The move from 545 to 545C swapped the mechanical 3306 for the electronically controlled Cat C7 ACERT diesel to meet Tier 3 emissions, adding electronic engine management and updated arch and grapple hydraulics; the later 545D carried the same layout forward on the C7.1 ACERT engine for tighter emissions tiers. Those generations brought emissions hardware, sensors, and electronic diagnostics that raise both purchase price and repair complexity. The mechanical 545 carries none of that: the 3306 DITA is a fully mechanical diesel with no aftertreatment and no ECM, built on a high-volume industrial engine platform shared with dozers, graders, and generator sets. That keeps acquisition and repair cost down and makes the 545 a working logger's machine rather than a shop-dependent one. In the used and parts market it stays in demand for that reason: clean original units are scarce, but driveline, axle, winch, and arch components interchange broadly across Cat's mechanical-era wheel skidder family, and the simplicity of the 3306 keeps independent shops able to service it long after Cat's own parts support has thinned.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 545 specifications
Engine
| Engine model | Cat 3306 DITA, 6-cylinder direct-injection diesel, turbocharged and aftercooled |
| Gross power | 168 kW (225 hp) at 2200 rpm |
| Net power | 149 kW (200 hp) at 2200 rpm, per Caterpillar/ISO 9249, SAE J1349 and EEC 80/1269 ratings |
| Displacement | 10.5 L (638 in³) |
| Bore x stroke | 120.7 mm x 152.4 mm (4.75 in x 6.00 in) |
| Emissions tier | Mechanical, pre-emissions-tier diesel. No EPA or EU tier rating published for this engine generation |
Weights
| Operating weight, grapple/arch configuration | 18 217 kg (40,161 lb). Includes enclosed cab, 30.5 x 32 tires, blade, dual-function arch, bunching grapple, standard lights, full fuel tank |
| Operating weight, cable configuration | 18 137 kg (39,901 lb). Includes open cab/canopy, 30.5 x 32 tires, winch, rear cable fenders, blade and arch, standard lights |
| Operating weight, upper end of range reported by equipment databases | Up to approx. 20 230 kg (44,600 lb) on heavier tire/equipment packages. Varies by configuration/source |
| Shipping weight | Not published in available factory literature |
| Ground pressure | Not published in available factory literature |
Dimensions
| Overall length, grapple/arch configuration | 7.95 m (312.9 in / 26.1 ft) |
| Overall length, cable configuration | 7.07 m (278.5 in / 23.2 ft) |
| Overall width, 30.5 x 32 tires | approx. 3.39-3.43 m (11.1-11.3 ft). Figure varies slightly by source and tire option |
| Height to top of cab | 3.37 m (132.5 in / 11.05 ft) |
| Wheelbase | 3.84 m (151.1 in / 12.6 ft) |
| Ground clearance | 0.605-0.606 m (23.8-23.9 in), grapple vs. cable-arch configuration |
| Standard/optional tires | 30.5 x 32 16PR standard; 35.5 x 32, 73/44 x 32 or 68/50 x 32 offered as options |
Performance
| Travel speeds, forward (5-speed powershift, 30.5 x 32 tires) | 6.4 / 9.0 / 10.9 / 15.3 / 27.5 km/h (4.0 / 5.6 / 6.8 / 9.5 / 17.1 mph) |
| Travel speeds, reverse (3-speed) | 6.2 / 10.5 / 18.6 km/h (3.9 / 6.5 / 11.6 mph) |
| Winch line pull, maximum at stall | 201 kN (45,200 lb) |
| Winch line speed, full drum at rated engine rpm | 110 m/min (360 ft/min) |
| Winch drum cable capacity, standard drum | 45 m (148 ft) |
| Gradeability | Not published in available factory literature |
Service capacities (summary)
| Fuel tank | 378 L (99.8 US gal) |
| Cooling system | 56 L (14.8 US gal) |
| Engine oil (crankcase, with filter) | 29 L (7.7 US gal) |
| Transmission and torque converter | 54 L (14.0 US gal) |
| Hydraulic system | Total 123 L (32 US gal); reservoir tank 65 L (17 US gal) |
| Differential and final drives | Front 52 L (13.7 US gal); rear 74 L (19.6 US gal) |
| Winch (retrieval device) sump | 25 L (6.6 US gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
545 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) - Cat 3306 DITA turbocharged diesel | 29.0 L (7.7 US gal); some spec sheets list 26.5 L (7.0 US gal) - varies by configuration/series | Cat DEO-ULS SAE 15W-40 for general operation. Cat DEO 10W-30 recommended below freezing for easier cold starts, per Cat's diesel engine oil viscosity-by-ambient-temperature guidance. |
| Cooling system | 56.0 L (14.8 US gal) | Cat ELC (Extended Life Coolant/Antifreeze), premix or concentrate mixed to local freeze-protection needs. Older factory fills used Cat DEAC conventional coolant, which needs periodic SCA conditioning; ELC is the current Cat recommendation for this coolant class. |
| Fuel tank | 378 L (99.8 US gal) | No. 2-D diesel fuel meeting Cat's fuel specification for normal ambient use. No. 1-D or a winter-blended diesel is recommended in cold climates to prevent fuel gelling/waxing. |
| Transmission (powershift/torque converter) | 54.0 L (14.3 US gal) | Cat TDTO (Transmission/Drive Train Oil) SAE 30. Cat TDTO-TMS multigrade is the extended-service alternative where cold-start flow or longer drain intervals are wanted. |
| Front differential & final drive (each) | 52.0 L (13.7 US gal) | Cat TDTO / TDTO-TMS, same drive-train oil family as the transmission. |
| Rear differential & final drive (each) | 74.0 L (19.5 US gal) - larger than the front housing on this machine's axle layout | Cat TDTO / TDTO-TMS, same drive-train oil family as the transmission. |
| Hydraulic tank (refill) | 64-65 L (17.0 US gal) | Cat HYDO Advanced 10, Caterpillar's standard multigrade hydraulic oil for this machine class. A heavier grade (Cat HYDO Advanced 15) applies where sustained high ambient temperatures call for it. |
| Hydraulic system total (tank, lines and cylinders) | 121-123 L (32.0-32.5 US gal) on grapple-equipped units; total system capacity runs close to tank capacity (about 65 L / 17 US gal) on non-grapple configurations | Cat HYDO Advanced 10. |
| Grease (spec only, all fittings) | Not capacity-rated - service per lubrication interval, not reservoir volume | Cat Multipurpose Grease (Cat MPGM). NLGI 2 for standard ambient conditions, NLGI 1 recommended in cold climates for easier gun dispensing. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 545 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 6,000 h |
|
Servicing the 545 beyond the schedule
Predictive Maintenance & Fluid Analysis
Run S·O·S sampling on the 3306 DITA engine oil, powershift transmission/torque converter oil, front and rear axle final drive oil, and hydraulic oil on a fixed hourly cycle instead of guessing. Trending iron and copper in axle samples flags planetary final-drive wear before a housing has to come off; trending soot and TBN in engine oil catches injector or ring wear early. Sample the winch gearcase separately since it runs its own sump and clutch wear shows up there first.
Corrective & Common Repairs
Expect winch clutch and brake band wear from repeated line-pull cycling, plus cable damage from crushing under load - check drum wrap and fairlead rollers after every hard pull. Articulation hitch pins and thrust bearings wear from constant frame flex on skid trails and need shimming or replacement before play shows up in steering response. Differential lock solenoids and final drive seals on both axles are common leak and engagement-failure points given the mud, water, and debris exposure typical of skid trail duty.
Overhaul & Rebuild Points
The 3306 DITA tolerates high hours before needing an inframe overhaul, but track oil consumption, blow-by, and compression trend data rather than a fixed hour number to time it. Powershift transmission and torque converter clutch packs wear from constant directional shifting under load and are usually the next major rebuild after the engine. At major overhaul time, plan on pulling front and rear final drives for planetary gear and bearing inspection, and rebuild the winch clutch and brake assembly on the same cycle since access overlaps.
Seasonal & Environment Servicing
Cold-start the 3306 DITA with ether or a coolant heater below freezing since it has no electronic cold-start assist, and switch to winter-grade fuel and a lighter engine oil viscosity before temperatures drop. In wet, muddy skid trail conditions, grease the arch pivots, articulation hitch, and winch fairlead more often than the standard interval and check axle breathers and final drive seals for water intrusion. Clear chaff and mud from the radiator and hydraulic oil cooler regularly during dry, dusty logging seasons to prevent overheating.
545 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 1D-4540 | Bolt,Machine Fuel Filter Mounting | Fuel system service | Check fitment → |
| 1R-0750 | Filter As-Fuel | Fuel system service | Check fitment → |
| 1W-6629 | Tube As-Fuel Filter | Fuel system service | Check fitment → |
| 134-3589 | Film-Information | Fuel system service | Check fitment → |
| 6I-0273 | Filter Element As-Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
545 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 0100-03 / 0100-04 | Engine oil pressure sensor circuit fault (signal above normal / voltage below normal) | Corroded or damaged sensor connector, chafed harness, or failed oil pressure sensor - not necessarily an actual low-oil-pressure condition | Confirm true engine oil pressure with a mechanical gauge first, then check the sensor connector and wiring before replacing the sensor |
| 0110-04 / 0110-08 | Engine coolant temperature sensor circuit fault (voltage below normal or abnormal signal) | Sensor failure, corroded connector, or a short to ground in the harness feeding the coolant temp sensor | Inspect the sensor connector, check sensor resistance against spec, replace the sensor if out of range |
| 0177-04 / 0177-08 | Torque converter (transmission) oil temperature sensor fault or a genuine high-temperature condition, since the transmission cooler runs off engine coolant on this platform | Circuit/sensor fault, or real overheating from low or degraded transmission fluid, a plugged filter, a restricted cooler, or a worn orifice/valve body component | Check transmission fluid level and condition and the cooler/filter first; if fluid and cooling are normal, test the sensor circuit before condemning the transmission |
| 0600-04 / 0600-08 | Hydraulic oil temperature sensor circuit fault | Failed sensor or wiring fault feeding the hydraulic temperature gauge/monitor | Check hydraulic fluid level and cooler airflow, then verify sensor wiring and resistance before replacing the sensor |
| 0271-03 / 0271-05 / 0271-06 | Action alarm circuit fault (the audible warning buzzer itself, not the condition it would have announced) | Blown fuse, open or shorted alarm wiring, or a failed buzzer/alarm module | Check the alarm fuse and relay, test wiring continuity to the alarm, replace the alarm unit if it fails to sound on a bench test |
| 0324-03 | Action lamp circuit fault (the central warning lamp on the monitor panel) | Wiring short to power, failed bulb or LED module, or a fault on the gauge cluster board | Inspect the action lamp wiring for chafing against a power source and check the bulb/module before replacing panel components |
| 0168-02 / 0168-04 | Electrical system voltage abnormal, erratic, or below normal | Weak or discharged battery, worn alternator brushes or failed regulator, loose belt, or corroded ground straps | Load-test the battery, check alternator output and belt tension, and clean/tighten ground connections |
| 0096-xx | Fuel level sender circuit fault (erratic, open, or shorted signal to the fuel gauge) | Stuck or corroded sender float arm, or a broken wire/connector at the tank sender | Check sender resistance across its full float travel and inspect the wiring and connector at the tank |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
545 attachments & work tools
Logging winch (cable-arch configuration)
High-capacity, four-function-control winch standard on cable-arch machines, self-contained with its own oil pump using winch sump oil for cooling and lubrication. Bare-drum line pull is about 201 kN (45,200 lb) at up to 110 m/min (360 ft/min) line speed, drum around 250 mm (10 in) diameter by 280 mm (11 in) wide, holding roughly 45 m (148 ft) of cable.
Cable arch
Fixed drawbar-style arch used with the logging winch for line-skidding and yarding work, with a two-position adjustable fairlead height to suit ground and stand conditions. Logging winch is standard equipment in this configuration; the arch gate carries a bolt-on fairlead roller assembly when a winch is fitted, or a bolt-on guard when it is not.
Dual-function grapple arch
Grapple-only arch that adds forward-and-aft (extend/retract) movement for extra reach when picking up loads or working over obstacles, reducing machine repositioning. Sized for the machine's power and long wheelbase to run large-capacity bunching grapples, well suited to large bundles of small stems and pre-bunched loads.
Grapple work tools
Bunching and continuous-rotation grapples mount to the dual-function arch tips, sized for this class at roughly 1.5-1.8 sq m (16.6-19 sq ft) opening capacity depending on bunching vs. thinning duty; other class listings cite smaller ranges near 0.7-1.3 sq m (8-13.5 sq ft), so grapple capacity varies by configuration/series. Continuous-rotation grapples add 360-degree rotation and need the machine's standard grapple hydraulic circuit, not a separate kit.
Decking blade
Fabricated push/decking blade with heat-treated, bolt-on cutting edges for clearing landings and roads and maintaining log decks; offered in a no-blade option for industrial use and an extended-decking option around 3.1 m (123.5 in / 10.3 ft) wide for maximum tire coverage. Approximate blade weight is 1,200 kg (2,630 lb) with a maximum lift height near 2.1 m (82 in).
Mounting/coupler system
No quick-attach coupler is used on this class; the arch (cable or dual-function), grapple, and blade are frame-integrated or bolt-on assemblies fitted to dedicated cylinder-mount bosses on the long rear frame, factory- or dealer-installed rather than field-swapped like excavator tools.
Hydraulic system for work tools
Grapple, arch, and blade functions run off the machine's load-sensing, variable-displacement, pressure-compensated hydraulic pump rated around 190 L/min (50 gpm) with a relief setting near 21 MPa (3,045 psi); no aftermarket auxiliary hydraulic kit is required for factory-offered tools.
Tire and undercarriage options
Expanded tire choices, typically 30.5L-32 or 35.5L-32 (16 PR), let the machine hold skidding traction across a range of ground conditions; hydraulically engaged differential locks on both axles further extend the operating range for work-tool duty in soft or uneven terrain.
Guarding and protection package
Resiliently mounted, modular ROPS/FOPS operator cab meets ISO 8082/8083/8084 roll-over and falling-object protection standards. Full belly guards protect undercarriage components and rear-axle bottom guarding, backed by a rigid lower frame, to resist damage from stumps and rocks during grapple and blade work.
All 545 assemblies by section
Every catalogued assembly group for the Caterpillar 545. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
149-0220 Aftercooler Gp
| 03***19 | Bolt; --To Bearing Ret. At Lower Front Shaft Bore | 4 |
| 03***57 | Bolt; --To Reverse Shaft Bearing Retainer & Forward Shaft Bearing Retainer | 4 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 3 |
148-3037 Air Cleaner Gp
| 12***37 | Precleaner As; -Air Cleaner-Air Inlet | 1 |
| 13***60 | Clamp-Hose | 4 |
| 14***37 | Air Cleaner Group | 1 |
148-8289 Air Cleaner Gp
| 10***50 | Film; (Air Cleaner) (Radial Seal) (On Air Cleaner Cover) | 1 |
| 14***89 | Air Cleaner Group | 1 |
| 4P***24 | Seal-O-Ring | 1 |
8n-5053 Fastener Gp-Exhaust Manifold
| 0S***14 | Bolt (.25" Diameter-.50" Long) | 2 |
| 1W***48 | Support Assem. | 1 |
| 2N***66 | Locknut; (3/8-16-Thd)(High Temperature) | 12 |
143-1238 Indicator Gp-Air Filter Change
| 14***38 | Indicator Group-Air Filter Change | 1 |
| 5P***00 | Connector-Air Brake | 2 |
| 5P***11 | Tube; (Housing Drain/Manual Bleed) | 0 |
148-3036 Lines Gp-Air
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
| 14***36 | Lines Group-Air | 1 |
1w-3233 Lines Gp-Air
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 1 |
| 1W***33 | Lines Group-Air | 1 |
| 2B***04 | Clip (1.062" Long); (1/4 In Id Opening) | 2 |
7n-2730 Manifold Gp-Exhaust
| 7N***30 | Manifold Group-Exhaust; Exhaust Manifold Group | 1 |
| 8N***84 | Manifold-Exhaust; (Rear) | 1 |
| 8N***85 | Manifold-Exhaust; (Center) | 1 |
148-3035 Muffler Gp
| 14***35 | Muffler Group | 1 |
| 14***18 | Pipe | 1 |
| 14***19 | Pipe | 1 |
124-3237 Precleaner Gp -Air Cleaner
| 12***37 | Precleaner As; -Air Cleaner-Air Inlet | 1 |
| 5P***99 | Clamp; (Hose) | 1 |
| 6H***21 | Body-Pre-Cleaner | 1 |
216-0205 Precleaner Gp
| 20***38 | Precleaner Group | 1 |
| 21***05 | Precleaner Group | 1 |
127-0396 Turbocharger Gp
| 12***96 | Turbocharger Group | 1 |
| 1S***95 | Gasket-Turbocharger To Manifold; Gasket Turbocharger To Manifold | 1 |
| 21***11 | Turbocharger Group | 1 |
219-9711 Turbocharger Gp
| 21***14 | Cartridge Group-Turbocharger | 1 |
| 21***15 | Cover; (Compressor) | 1 |
| 21***11 | Turbocharger Group | 1 |
Basic Engine
9y-0066 Fastener Gp-Oil Pan
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 3 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 20 |
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 5 |
6n-3350 Support Gp-Engine
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 6 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 6 |
| 6N***50 | Support Group-Engine; Engine Support Group | 1 |
1n-4406 Camshaft Gp
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 1N***06 | Camshaft Group-Single; Camshaft Group--Single | 1 |
| 7E***80 | Camshaft | 1 |
8n-3163 Cover Gp-Cylinder Block
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 2A***98 | Pin,Straight,Headle Flywheel Housing | 2 |
| 4B***38 | Plug 28.95 mm(1.14 In.) Hole Dia. | 1 |
3n-4923 Cover Gp-Front Housing
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 4 |
| 2P***20 | Gasket-- Front Cover | 1 |
| 2S***41 | Plug 2.14 In. (5.43 cm) Diameter | 1 |
8n-4745 Cover Gp-Valve Mechanism
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 15 |
| 13***47 | Seal-Integral; (Valve Cover) | 1 |
| 2W***86 | Cover As-Cylinder Head | 1 |
4p-9856 Crankshaft Gp
| 10***52 | Plate-Thrust | 2 |
| 19***34 | Kit-Basic Engine Repair; (Main Bearing)(Crankshaft) | 0 |
| 23***33 | Bearing-Main; (Standard)(Standard) | 7 |
7n-6550 Cylinder Block Gp
| 10***12 | Insert; (Liner Seat) (.822-mm Thk) | 0 |
| 10***18 | Insert; (Liner Seat) (1.605-mm Thk) | 0 |
| 10***27 | Insert-Liner Seat (2.710mm Thk) | 0 |
8n-5286 Cylinder Block Gp
| 11***50 | Gasket-Plate | 1 |
| 1S***40 | Dowel; (30.23 mm X 9.37 mm) | 1 |
| 3S***96 | Seal-O-Ring; (9.53mm Id) | 1 |
1n-3576 Cylinder Block Gp
| 1N***76 | Cylinder Block Group | 1 |
| 1S***40 | Dowel; (30.23 mm X 9.37 mm) | 1 |
| 2S***58 | Washer-Hard; (17x29x3-mm Thk)(Engine Brake) | 14 |
8n-6796 Cylinder Head Gp
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 10***65 | Insert-Valve Seat; (Exhaust)(Standard) | 6 |
| 10***68 | Insert-Valve Seat; (Inlet)(Standard) | 6 |
8n-0246 Cylinder Head Gp
| 10***60 | Valve (Intake) | 6 |
| 10***65 | Insert-Valve Seat; (Exhaust)(Standard) | 6 |
| 10***68 | Insert-Valve Seat; (Inlet)(Standard) | 6 |
1w-4410 Damper Gp
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 6 |
| 16***23 | Damper Assem. | 1 |
| 1W***10 | Damper Group; Engine Damper Group | 1 |
148-5713 Drive Gp-Auxiliary
| 10***76 | Pulley-Auxiliary Drive | 1 |
| 14***13 | Drive Group-Auxiliary | 1 |
| 1B***05 | Key; (Woodruff) | 1 |
203-7929 Drive Gp-Fan
| 20***28 | Bracket As | 1 |
| 20***29 | Drive Group-Fan | 1 |
| 2D***67 | Fitting-Grease; (Fan Drive) | 1 |
148-3030 Drive Gp-Fan
| 14***30 | Drive Group-Fan | 1 |
| 14***08 | Bracket As-Fan | 1 |
| 1P***46 | Shaft-Fan | 1 |
2p-6157 Extension Gp-Drain
| 2P***57 | Extension Group-Drain | 1 |
| 3B***32 | Elbow Oil Pan Drain | 1 |
| 5P***51 | Hose; (78-cm)(European Sourced) | 0 |
7n-9536 Fastener Gp-Cylinder Head
| 1B***09 | Bolt-- Head To Cylinder Block | 5 |
| 1D***95 | Bolt (5/8-11x6in); (5/8-11x6-In) | 20 |
| 2S***36 | Washer,Flat Cover Assembly Mounting And Flywheel Housing Cover | 25 |
8n-0872 Fastener Gp-Front Housing
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 20 |
| 1C***51 | Bolt--Installation Of 2v***26 Retainer | 2 |
| 3E***14 | Bolt; (3/8-16x0.87-In) | 6 |
6c-5917 Flywheel Gp
| 2L***01 | Bolt; (5/8-18x1.5-In) | 9 |
| 6C***17 | Flywheel Group | 1 |
| 7N***45 | Gear ( 130 Teeth ) | 1 |
4p-9858 Gear Gp-Front
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 2 |
| 0S***48 | Bolt,Machine Camshaft Gear Mounting | 4 |
2p-6166 Housing Gp-Flywheel
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 13 |
| 2A***62 | Gasket; (Rear Gear Housing Drain Plug) | 2 |
| 2B***58 | Plug--To Block Upper Front Air Manifold | 1 |
8n-0303 Housing Gp-Front
| 1W***00 | Gasket Timing Gear Cover | 1 |
| 1W***16 | Plate As-Front | 1 |
| 5M***14 | Pipe Plug Cylinder Block Oil Pressure | 1 |
6n-8326 Lifting Gp-Engine
| 6N***26 | Lifting Group; Lifting Eye Gp-Engine | 1 |
| 6V***99 | Bolt; (5/8-11x38.1mm) | 4 |
| 8D***54 | Washer,Flat Electric Starting Motor Group | 4 |
168-5108 Mounting Gp-Alternator
| 16***08 | Mounting Group-Alternator | 1 |
| 2W***94 | Bracket | 1 |
| 4L***54 | Capscrew; (3/8-16x21 In) (Gd8) (Hex Hd) (4-Roller) | 1 |
143-1401 Mounting Gp-Engine & Tmsn
| 14***01 | Mounting Group-Engine & Tmsn | 1 |
| 14***26 | Mount As | 2 |
| 6V***32 | Bolt; (M24x3.0x120mm) | 4 |
2p-9647 Pan Gp-Oil -Engine
| 11***35 | Plug-Drain; (Engine Oil Pan) | 1 |
| 11***36 | Adapter As-Drain | 1 |
| 16***99 | Gasket-Oil Pan | 1 |
7e-4236 Pan Gp-Oil
| 12***45 | Seal-O-Ring; (Oil Pan Drain Plug) | 2 |
| 16***99 | Gasket-Oil Pan | 1 |
| 16***00 | Gasket; (Oil Pan) | 1 |
9y-8219 Piston & Rod Gp
| 1P***56 | Bolt,Shoulder Connecting Rod | 2 |
| 1S***43 | Ring,Retaining Piston Pin | 2 |
| 32***72 | Bearing-Connecting Rod; (Standard) | 1 |
168-4530 Piston & Rod Gp
| 16***30 | Piston & Rod Group | 1 |
| 16***31 | Body As-Piston | 1 |
| 1P***56 | Bolt,Shoulder Connecting Rod | 2 |
9y-8218 Piston Gp
| 15***62 | Body As-Piston | 1 |
| 2W***07 | Ring - Piston (Top) | 1 |
| 2W***08 | Ring-Piston; (Intermediate) | 1 |
148-3038 Pulley Gp-Crankshaft
| 14***38 | Pulley Group-Crankshaft | 1 |
| 14***12 | Pulley-Crankshaft | 1 |
| 5S***48 | Washer-Special | 1 |
148-3033 Pulley Gp-Fan & Alt Drive
| 10***99 | Adapter-Fan | 1 |
| 14***33 | Pulley Group-Fan & Alt Drive | 1 |
| 16***07 | Pulley-Alternator | 1 |
2p-6226 Seal Gp-Crankshaft
| 2P***26 | Seal Group-Crankshaft; Seal Group-Crankshaft | 1 |
| 7C***97 | Seal,Plain Encased Housing Part Of Kit P/N 5r***25 | 1 |
| 9Y***95 | Seal Group-Crankshaft; (Clockwise Rotation) | 1 |
8n-0107 Trunnion Gp-Engine
| 0L***29 | Bolt- 7.63 cm(3 In.) Long - Location "H" | 6 |
| 2P***87 | Ring | 1 |
| 2P***92 | Seal (Id=133.02mm) | 1 |
7c-7013 Valve Mechanism Gp
| 1B***09 | Bolt-- Head To Cylinder Block | 1 |
| 2S***36 | Washer,Flat Cover Assembly Mounting And Flywheel Housing Cover | 1 |
| 3K***60 | Plug-O-Ring; (1/2-20 Thd) | 1 |
7n-8026 Valve Mechanism Gp
| 5S***18 | Push Rod,Engine Pop Valve Lifter | 12 |
| 7C***13 | Valve Mechanism Group | 1 |
| 7N***26 | Valve Mechanism Group; Valve Mechanism Group | 1 |
Braking System
238-8232 Accumulator Gp-Brake -Charged
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
| 22***32 | Cap; (Gas Valve) | 1 |
| 22***52 | Valve-Gas; (Brake Accumulator) | 1 |
223-3917 Accumulator Gp-Brake -Uncharged
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
| 22***17 | Accumulator Group-Brake; -Uncharged-Front | 1 |
| 22***32 | Cap; (Gas Valve) | 1 |
240-5972 Accumulator Gp-Brake -Uncharged
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
| 22***32 | Cap; (Gas Valve) | 1 |
| 22***52 | Valve-Gas; (Brake Accumulator) | 1 |
144-8520 Accumulator Gp-Brake -Uncharged
| 03***13 | Screw-Forming; (10-24x0.37-In) | 2 |
| 06***35 | Valve-Gas | 1 |
| 06***36 | Protector-Gas Valve | 1 |
157-8172 Accumulator Gp-Brake
| 03***13 | Screw-Forming; (10-24x0.37-In) | 2 |
| 06***35 | Valve-Gas | 1 |
| 06***36 | Protector-Gas Valve | 1 |
239-9941 Accumulator Gp-Brake -Charged
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
| 22***32 | Cap; (Gas Valve) | 1 |
| 22***52 | Valve-Gas; (Brake Accumulator) | 1 |
144-7237 Accumulator Gp-Brake -Charged
| 03***13 | Screw-Forming; (10-24x0.37-In) | 2 |
| 06***35 | Valve-Gas | 1 |
| 06***36 | Protector-Gas Valve | 1 |
259-0617 Accumulator Gp-Brake -Uncharged, Cold Weather
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
| 22***32 | Cap; (Gas Valve) | 1 |
| 22***52 | Valve-Gas; (Brake Accumulator) | 1 |
143-1413 Actuator Gp-Parking Brake
| 0S***75 | Pin-To Arm Assembly And Retainer | 1 |
| 14***13 | Actuator Group-Parking Brake | 1 |
| 14***52 | Rod As | 1 |
200-1315 Brake Gp-Parking
| 20***15 | Brake Group-Parking | 1 |
| 20***16 | Camshaft | 1 |
| 3B***12 | Lockwasher (3/4") Transfer Gear Case To Frame Mounting | 2 |
118-2291 Brake Gp-Parking
| 11***91 | Brake Group-Parking | 1 |
| 3B***12 | Lockwasher (3/4") Transfer Gear Case To Frame Mounting | 2 |
| 5D***41 | Camshaft | 1 |
283-9977 Brake Gp-Parking
| 20***16 | Camshaft | 1 |
| 28***77 | Brake Group-Parking | 1 |
| 28***78 | Shoe As-Brake | 2 |
260-1921 Control Gp-Foot Brake
| 11***95 | Pin-Spring | 1 |
| 14***75 | Shaft | 1 |
| 14***76 | Plate | 1 |
148-9774 Control Gp-Foot Brake
| 11***95 | Pin-Spring | 1 |
| 14***66 | Plate As | 1 |
| 14***75 | Shaft | 1 |
143-1446 Control Gp-Parking Brake
| 09***12 | Pin-Clevis | 1 |
| 10***46 | Rod-Control | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
143-1448 Control Gp-Service Brake
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***98 | Boot | 1 |
| 11***99 | Kit-Seal; (Brake Valve)(Service Brake Valve) | 1 |
218-7458 Control Gp-Service Brake
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***40 | Kit-Bladder | 1 |
| 14***74 | Bolt; (M10x1.5x75-mm) | 4 |
143-1418 Lines Gp-Service Brake
| 14***18 | Lines Group-Service Brake | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
| 14***35 | Tee, -6 Orb / Orfs | 1 |
215-3685 Valve Gp-Brake Control -Service
| 11***98 | Boot | 1 |
| 11***99 | Kit-Seal; (Brake Valve)(Service Brake Valve) | 1 |
| 21***85 | Valve Group-Brake Control; -Service | 1 |
149-3424 Valve Gp-Brake Control -Service
| 11***98 | Boot | 1 |
| 11***99 | Kit-Seal; (Brake Valve)(Service Brake Valve) | 1 |
| 14***24 | Valve Group-Brake Control; -Service | 1 |
106-1774 Valve Gp-Brake Control -Parking
| 10***74 | Valve Group-Brake Control; -Parking | 1 |
| 25***76 | Repair Kit; (Includes Boot, Seals, Ring, Ball And Springs) | 1 |
| 4J***33 | Seal Fuel Injection Pump | 2 |
Cooling System
4p-9861 Pump Gp-Water
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 2 |
| 17***60 | Pump Group-Water | 1 |
| 4P***61 | Pump Group-Water | 1 |
155-0061 Pump Gp-Water
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 14***91 | Shaft-Water Pump | 1 |
172-7760 Pump Gp-Water
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 15***82 | Seal-Lip Type | 1 |
| 16***50 | Seal Group; (Water Pump) | 1 |
6i-0718 Cooler Gp-Fltr Base & Eng Oil
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 2 |
| 1R***07 | Filter As-Engine Oil; (Advanced Efficiency) | 1 |
| 2W***61 | Gasket | 1 |
6i-0717 Cooler Gp-Fltr Base & Eng Oil
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 2 |
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 2 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 8 |
148-3032 Fan Gp-Suction
| 14***32 | Fan Group-Suction | 1 |
| 25***58 | Spider As; (9-Blade) | 1 |
| 4L***37 | Hex Head Capscrew, 3/8 Nc X 1 1/2 In. (38 mm) | 6 |
8n-0888 Regulator Gp-Temperature
| 11***10 | Regulator-Water Temperature; (91 Deg Celsius) | 1 |
| 1W***10 | Pipe-Outlet | 1 |
| 5S***82 | Capscrew; (Hex Hd) (1/2-13x1 3/8, Gd8, Z) | 4 |
6n-8492 Lines Gp-Aftercooler Water
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 17***18 | Tube As | 1 |
| 17***19 | Tube As | 1 |
4w-6157 Lines Gp-Water
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 1 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 1 |
| 0T***65 | Bolt--3/8" X 3 1/2"--Use As Required; Bolt 5t***56 Plate To Cover Gp 4n***72 | 2 |
8n-4408 Lines Gp-Water
| 7N***56 | Elbow-Bypass | 1 |
| 7X***31 | Plug-Pipe; (Flywheel Housing Drain) | 2 |
| 8N***08 | Lines Group-Water | 1 |
143-1399 Radiator & Mounting Gp
| 06***74 | Mounting | 4 |
| 13***65 | Washer; (13.8x45x3-mm Thk) | 4 |
| 14***99 | Radiator & Mounting Group | 1 |
149-4229 Radiator Gp
| 03***19 | Cap As-Radiator | 1 |
| 12***71 | Core As-Power Train Oil Cooler | 1 |
| 14***29 | Radiator Group | 1 |
222-5181 Radiator Gp
| 03***19 | Cap As-Radiator | 1 |
| 16***52 | Retainer-Glass | 1 |
| 16***53 | Lens-Sight Glass | 1 |
Electrical And Starting System
123-6449 Alarm Gp -Backup
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***49 | Alarm Group | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
3e-6328 Alarm Gp -Action
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 3E***28 | Alarm Group; -Caterpillar Monitoring System-Action | 1 |
9x-7803 Alternator Gp-Charging
| 03***12 | Screw-Forming; (10-24x0.5-In) | 4 |
| 10***31 | Fan-Alternator; (11-Blade) | 1 |
| 10***32 | Collar; (Alternator) | 1 |
170-7736 Alternator Gp-Charging
| 10***67 | Pipe | 1 |
| 11***01 | Alternator Group-Charging | 1 |
| 12***18 | Guard As-Alternator | 1 |
249-2889 Alternator Gp-Charging
| 10***67 | Pipe | 1 |
| 12***18 | Guard As-Alternator | 1 |
| 17***53 | Alternator Group-Charging; (24-Volt, 80-Ampere) | 1 |
168-5107 Alternator Gp-Charging
| 10***67 | Pipe | 1 |
| 12***18 | Guard As-Alternator | 1 |
| 16***07 | Alternator Group-Charging | 1 |
114-2401 Alternator Gp-Charging
| 03***12 | Screw-Forming; (10-24x0.5-In) | 4 |
| 10***31 | Fan-Alternator; (11-Blade) | 1 |
| 10***32 | Collar; (Alternator) | 1 |
177-9953 Alternator Gp-Charging
| 17***53 | Alternator Group-Charging; (24-Volt, 80-Ampere) | 1 |
| 18***38 | Collar | 2 |
| 18***39 | Fan As; (Alternator) | 1 |
316-7251 Alternator Gp-Charging
| 10***31 | Fan-Alternator; (11-Blade) | 1 |
| 18***34 | Nut-Flange; (5/8-18-Thd) | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 2 |
143-1243 Battery Gp
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 3 |
| 10***22 | Cable As | 1 |
| 11***67 | Cable As | 1 |
161-7071 Control Gp-Power Train
| 16***71 | Control Group-Power Train | 1 |
| 17***89 | Control Group-Unprogrammed; -Steering, Transmission | 1 |
| 20***57 | Electronics Group-Power Train | 1 |
132-6640 Control Gp-Secondary Steering
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***40 | Control Group-Secondary Steering | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 11 |
172-9389 Control Gp-Unprogrammed -Power Train
| 10***52 | Screw-Pan Head; (8-32x0.375-In) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 17***89 | Control Group-Unprogrammed; -Steering, Transmission | 1 |
219-1956 Converter Gp-Electrical
| 20***81 | Converter-Power; (24-Volt To 12-Volt) | 1 |
| 21***56 | Converter Group-Electrical | 1 |
| 7X***32 | Screw-Hex Flange; (M4x0.7x8-mm) | 2 |
173-0001 Electrical Ar
| 14***43 | Battery Group | 1 |
| 14***09 | Wiring Group-Machine | 1 |
| 14***75 | Wiring Group-Cab | 1 |
228-0429 Electronics Gp-Monitor
| 22***29 | Electronics Group-Monitor | 1 |
| 24***99 | Software Group-Monitor; (Caterpillar Monitoring System) | 1 |
| 24***00 | Service Group-Monitor; (Caterpillar Monitoring System) | 1 |
157-1994 Electronics Gp-Power Train
| 13***79 | Film-Identification; (Electronic Control Module) | 1 |
| 15***94 | Electronics Group-Power Train | 1 |
| 17***23 | Software Group-Power Train | 1 |
205-3757 Electronics Gp-Power Train
| 13***79 | Film-Identification; (Electronic Control Module) | 1 |
| 20***57 | Electronics Group-Power Train | 1 |
| 23***67 | Software Group-Power Train | 1 |
245-7670 Harness As-Sensor
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
| 24***70 | Harness As-Sensor | 1 |
203-9165 Harness As-Sensor
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
234-4325 Lamp Gp-Flood
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 20***14 | Lens As; (Floodlight) | 1 |
| 23***25 | Lamp Group-Flood; -Suspended Mount | 1 |
242-3517 Lamp Gp-Flood
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***89 | Screw; (M6.5x40-mm) | 4 |
| 16***56 | Bolt-Hex Head; (M8x1.25x30mm) | 1 |
112-9378 Lamp Gp-Flood
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***78 | Lamp Group-Flood; -Suspended Mount | 1 |
| 14***82 | Screw; (7.4x20-mm) | 2 |
159-2757 Lighting Ar-Flood
| 14***91 | Lighting Group-Flood | 1 |
| 15***77 | Lighting Group-Flood | 1 |
| 15***57 | Lighting Ar-Flood | 1 |
221-4041 Lighting Ar-Flood
| 21***28 | Lighting Group-Flood; -Cab | 1 |
| 22***64 | Lighting Group-Flood; -Cab | 1 |
| 22***41 | Lighting Ar-Flood | 1 |
221-4040 Lighting Ar-Flood
| 21***28 | Lighting Group-Flood; -Cab | 1 |
| 22***40 | Lighting Ar-Flood | 1 |
159-2763 Lighting Ar-Flood
| 14***91 | Lighting Group-Flood | 1 |
| 15***77 | Lighting Group-Flood | 1 |
| 15***78 | Lighting Group-Flood | 1 |
159-2761 Lighting Ar-Flood
| 14***91 | Lighting Group-Flood | 1 |
| 15***77 | Lighting Group-Flood | 1 |
| 15***61 | Lighting Ar-Flood | 1 |
151-5277 Lighting Gp-Flood
| 11***78 | Lamp Group-Flood; -Suspended Mount | 2 |
| 15***77 | Lighting Group-Flood | 1 |
| 15***81 | Plate | 1 |
215-3128 Lighting Gp-Flood -Cab
| 11***78 | Lamp Group-Flood; -Suspended Mount | 4 |
| 21***28 | Lighting Group-Flood; -Cab | 1 |
| 6V***44 | Nut - Self Locking (2nd Type) | 4 |
148-9791 Lighting Gp-Flood
| 11***78 | Lamp Group-Flood; -Suspended Mount | 2 |
| 14***91 | Lighting Group-Flood | 1 |
| 14***13 | Plate As | 1 |
151-5278 Lighting Gp-Flood
| 11***78 | Lamp Group-Flood; -Suspended Mount | 8 |
| 14***24 | Harness As-Lighting; (Front Flood) | 2 |
| 14***25 | Harness As-Lighting; (Rear) | 1 |
220-1864 Lighting Gp-Flood -Cab
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 5 |
| 22***64 | Lighting Group-Flood; -Cab | 1 |
117-3915 Motor Gp-Electric -Secondary Steering
| 11***15 | Motor Group-Electric; -Engine Prelubrication-Sec Steering, Brake Release | 1 |
| 6V***01 | Nut; (3/8-16-Thd)(Plate To Rh And Lh Bracket As) | 2 |
| 7X***08 | Washer-Hard; (10.2x16x2-mm Thk) | 2 |
174-6427 Receptacle Gp-Auxiliary Start
| 17***27 | Receptacle Group-Auxiliary Start | 1 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 1 |
| 2P***75 | Seal-O-Ring | 2 |
267-8559 Resistor Gp
| 12***78 | Locknut; (M6x1-Thd) | 1 |
| 14***84 | Bolt-Hex Head; (M6x190mm) | 1 |
| 26***59 | Resistor Group | 1 |
141-2940 Sensor Gp-Pressure -Grapple Oil
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 14***40 | Sensor Group-Pressure; -Grapple Oil, Swing Control | 1 |
| 3E***71 | Wedge; (Receptacle Lock) (3 Pin) | 1 |
189-5746 Sensor Gp-Speed -Output
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***36 | Pin-Connector; (14-Ga To 18-Ga) | 2 |
| 17***49 | Strap; (Marker) | 1 |
193-0421 Sensor Gp-Speed -Torque Converter Output
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 2 |
| 17***49 | Strap; (Marker) | 1 |
6i-2108 Solenoid Gp-Shutoff
| 15***53 | Solenoid As; (Fuel Shutoff) | 1 |
| 2A***46 | Bolt,Machine Governor Linkage Bracket | 2 |
| 4B***74 | Washer (Required Only When Bosch Alternator Is Fitted) | 1 |
172-3549 Starting Aid Gp-Ether
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***49 | Starting Aid Group-Ether | 1 |
| 17***28 | Tube | 1 |
172-6457 Starting Ar-Cold Weather
| 17***49 | Starting Aid Group-Ether | 1 |
| 17***57 | Starting Ar-Cold Weather | 1 |
| 9X***04 | Battery-Maintenance Free; (12 Volt)(900 Amp) | 2 |
6v-5537 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 2H***29 | Ring - Retaining External | 1 |
4p-0915 Starting Motor Gp-Electric
| 20***60 | Starting Motor Group-Electric | 1 |
| 3E***34 | Bolt; (5/8-11x1.5-In) | 3 |
| 4H***69 | Gasket Starter Mtg Part Of Kit P/N 5r***25 | 1 |
106-8552 Starting Motor Gp-Electric
| 10***52 | Starting Motor Group-Electric | 1 |
| 5C***74 | Nut (M5x.8 Thd); (M5x0.8-Thd) | 2 |
| 7X***62 | Washer-Hard; (13.5x19x0.8-mm Thk) | 5 |
6v-5227 Starting Motor Gp-Electric
| 10***52 | Starting Motor Group-Electric | 1 |
| 6V***27 | Starting Motor Group-Electric | 1 |
| 6V***37 | Starting Motor Group-Electric | 1 |
6v-5538 Starting Motor Gp-Electric
| 3E***25 | Cover As; (Starting Motor) | 1 |
| 3E***27 | Kit-Bearing; (Starting Motor)(Incl Bearing Seals & Spacers) | 1 |
| 3E***28 | Kit; (Brush) (Includes O-Rings, Screw, Spring, & Brush) | 1 |
207-1561 Starting Motor Gp-Electric
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 20***61 | Starting Motor Group-Electric | 1 |
| 25***79 | Kit-Solenoid; (24-Volt)(Starting Motor) | 1 |
207-1560 Starting Motor Gp-Electric
| 20***60 | Starting Motor Group-Electric | 1 |
| 20***61 | Starting Motor Group-Electric | 1 |
| 6V***38 | Starting Motor Group-Electric | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
9x-7781 Switch Gp-Bypass
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
| 4B***43 | Nut,Plain,Hexagon Plate Mtg | 2 |
| 4B***63 | Washer; (4.7x11x1.2-mm Thk) | 2 |
254-3783 Switch Gp-Magnetic
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 25***83 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
179-0006 Switch Gp-Magnetic
| 17***06 | Switch Group-Magnetic; -Hydraulic Tank Fill Pump/Motor Relay | 1 |
| 1B***78 | Nut,Plain,Hexagon Rod To Lever Uoc:Bsv,Bsx | 2 |
| 4D***26 | Washer,Lock Starter Ground Cable, Internal And External Teeth | 2 |
125-1302 Switch Gp-Magnetic -Start Relay
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***02 | Switch Group-Magnetic; -Starting Motor, Start Relay | 1 |
241-8368 Switch Gp-Magnetic -Main Relay
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 24***68 | Switch Group-Magnetic; -Main Power Relay-Main Relay | 1 |
167-0138 Switch Gp-Magnetic -Main Relay
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***38 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
177-2373 Switch Gp-Rocker -Transmission Direction
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 2 |
| 10***29 | Actuator | 1 |
| 17***73 | Switch Group-Rocker; -Transmission Direction | 1 |
9g-7641 Switch Gp-Start
| 6V***62 | Screw-Machine; (8-32x0.31-In) | 4 |
| 7T***99 | Nut-Mounting; (1-32-Thd) | 1 |
| 9B***33 | Lockwasher; (Int'L Tooth) | 4 |
251-9350 Switch Gp-Transmission
| 14***09 | Housing | 1 |
| 17***73 | Switch Group-Rocker; -Transmission Direction | 1 |
| 25***50 | Switch Group-Transmission | 1 |
147-4575 Wiring Gp-Cab
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 3 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
216-9744 Wiring Gp-Cab
| 10***23 | Switch As-Rocker; (Boom Lamp) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
150-4421 Wiring Gp-Fuse Box
| 03***93 | Screw-Machine; (10-32x19.05-mm) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***02 | Switch Group-Magnetic; -Starting Motor, Start Relay | 1 |
143-1409 Wiring Gp-Machine
| 10***59 | Switch As-Pressure; (Engine Oil) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
220-2065 Wiring Gp-Machine
| 03***93 | Screw-Machine; (10-32x19.05-mm) | 4 |
| 10***59 | Switch As-Pressure; (Engine Oil) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
179-8315 Wiring Gp-Secondary Steering
| 03***07 | Terminal-Ring; (0-Ga, 3/8-In Screw) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
Engine Arrangement
146-6725 Engine Ar
| 10***29 | Kit-Gasket; (Turbocharger)(Turbocharger) | 0 |
| 10***57 | Pump Group-Engine Oil | 1 |
| 11***69 | Lines Group-Fuel Injection | 1 |
146-6726 Installation Ar-Engine
| 14***26 | Installation Ar-Engine | 1 |
| 14***30 | Drive Group-Fan | 1 |
| 14***32 | Fan Group-Suction | 1 |
Frame And Body
160-9750 Cover Gp-Frame
| 12***40 | Plug | 1 |
| 15***05 | Plate | 1 |
| 16***50 | Cover Group-Frame | 1 |
159-1538 Fender As-Rear
| 14***48 | Frame As-Rear | 1 |
| 15***38 | Fender As-Rear | 1 |
260-9661 Fender Gp
| 20***57 | Angle | 1 |
| 26***61 | Fender Group | 1 |
204-7607 Fender Gp
| 10***81 | Gusset | 2 |
| 10***42 | Plate | 4 |
| 17***45 | Fender; (Rh) | 1 |
148-9776 Floorplate Gp
| 12***86 | Floor Mat | 1 |
| 12***91 | Insulation | 1 |
| 12***26 | Insulation | 1 |
197-7491 Frame As-Front
| 11***70 | Cap | 4 |
| 11***58 | Plate | 1 |
| 11***73 | Stud-Weld; (M12x1.75x21.1-mm) | 8 |
141-6028 Frame As-Front
| 11***70 | Cap | 4 |
| 11***73 | Stud-Weld; (M12x1.75x21.1-mm) | 20 |
| 14***28 | Frame As-Front | 1 |
142-4048 Frame As-Rear
| 14***48 | Frame As-Rear | 1 |
| 15***02 | Block | 1 |
185-1980 Frame As-Rear
| 14***48 | Frame As-Rear | 1 |
| 18***80 | Frame As-Rear | 1 |
204-6503 Frame As-Rear
| 14***48 | Frame As-Rear | 1 |
| 20***03 | Back-Up Ring; (Sub For 06***03), Frame As-Rear | 1 |
| 20***57 | Angle | 1 |
143-1247 Frame Gp-Front
| 14***47 | Frame Group-Front | 1 |
| 14***10 | Plate As | 1 |
| 15***25 | Stop As | 2 |
143-1250 Frame Gp-Rear
| 14***50 | Frame Group-Rear | 1 |
| 16***60 | Pin As | 2 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 2 |
143-1383 Guard Gp-Bottom
| 14***83 | Guard Group-Bottom | 1 |
| 15***99 | Plate As | 1 |
| 15***85 | Plate | 1 |
143-1372 Guard Gp-Bottom
| 14***72 | Guard Group-Bottom | 1 |
| 14***40 | Guard As | 1 |
| 14***42 | Plate | 1 |
180-9186 Guard Gp-Cab
| 16***62 | Sheet | 1 |
| 18***86 | Guard Group-Cab | 1 |
| 21***26 | Plate As | 1 |
171-2024 Guard Gp-Cab
| 15***92 | Cover As | 1 |
| 15***16 | Plate | 1 |
| 16***62 | Sheet | 1 |
155-3042 Guard Gp-Cab
| 15***92 | Cover As | 1 |
| 15***16 | Plate | 1 |
| 15***42 | Guard Group-Cab | 1 |
169-5381 Guard Gp-Grapple Lines
| 15***16 | Clamp; (Hose) | 1 |
| 15***17 | Clamp; (Hose) | 1 |
| 16***81 | Guard Group-Grapple Lines | 1 |
194-8669 Guard Gp-Grapple Lines
| 15***16 | Clamp; (Hose) | 1 |
| 15***17 | Clamp; (Hose) | 1 |
| 19***69 | Guard Group-Grapple Lines | 1 |
209-3346 Guard Gp-Lines
| 20***46 | Guard Group-Lines | 1 |
| 20***47 | Guard As | 1 |
| 20***79 | Plate | 1 |
173-5494 Guard Gp-Lines
| 17***94 | Guard Group-Lines | 1 |
| 17***69 | Plate As | 2 |
| 19***52 | Guard As | 1 |
156-4307 Guard Gp-Lines
| 15***46 | Guard As | 1 |
| 15***07 | Guard Group-Lines | 1 |
| 18***43 | Guard As | 1 |
143-1386 Guard Gp-Lines -Articulated Hitch
| 10***50 | Plate | 4 |
| 10***81 | Strap | 2 |
| 13***22 | Bushing | 1 |
143-2243 Guard Gp-Radiator
| 14***43 | Guard Group-Radiator | 1 |
| 15***44 | Bar As | 1 |
| 17***97 | Grill As | 1 |
148-8959 Hitch Gp-Articulating
| 11***73 | Cap | 1 |
| 14***56 | Pin | 1 |
| 14***59 | Hitch Group-Articulating | 1 |
143-1391 Hood & Guard Gp
| 05***88 | Washer; (13.5x30x3-mm Thk) | 1 |
| 11***73 | Stud-Weld; (M12x1.75x21.1-mm) | 4 |
| 14***91 | Hood & Guard Group | 1 |
162-7067 Lines Gp-Grease
| 16***67 | Lines Group-Grease | 1 |
| 2D***83 | Fitting | 1 |
| 2V***60 | Hose Assem. 91.4 cm (36 In.) | 1 |
143-1396 Link Gp-Steering Frame Lock
| 14***96 | Link Group-Steering Frame Lock | 1 |
| 14***01 | Pin | 2 |
| 14***15 | Plate As | 1 |
159-1617 Step Gp
| 15***17 | Step Group | 1 |
| 17***77 | Cover; (Cab, Lh) | 1 |
| 17***80 | Cover As; (Cab, Rh) | 1 |
143-1402 Sweep Gp
| 12***36 | Handle | 2 |
| 14***45 | Handle As | 1 |
| 14***02 | Sweep Group | 1 |
220-3443 Sweep Gp
| 12***36 | Handle | 2 |
| 14***45 | Handle As | 1 |
| 17***11 | Locknut; (M16x2-Thd) | 2 |
Fuel System
7c-8993 Fastener Gp-Fuel Inj Pump
| 0S***14 | Bolt (.25" Diameter-.50" Long) | 3 |
| 2S***83 | Bolt (3.25" Long-Drilled Head) | 1 |
| 4F***57 | Screw,Cap,Hexagon H Shock Mount To Bracket | 8 |
1w-3597 Torque Control Gp
| 1P***52 | Insulator,Bushing Governor | 1 |
| 1W***97 | Torque Control Group | 1 |
| 2P***85 | Spacer (.635 mm Thk); (0.635-mm Thk) | 1 |
111-5162 Control Gp-Fuel Ratio
| 10***93 | Washer | 1 |
| 11***62 | Control Group-Fuel Ratio (Basic) | 1 |
| 11***58 | Washer; (12.7x6.65x0.79-mm Thk) | 1 |
143-2241 Control Gp-Governor
| 13***57 | Plug | 1 |
| 14***41 | Control Group-Governor | 1 |
| 16***09 | Rod As | 1 |
2w-1011 Filter Gp-Fuel
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 2 |
| 1R***50 | Filter As-Fuel; (Advanced Efficiency)(Secondary) | 1 |
| 2W***11 | Filter Group-Secondary; (Secondary) | 1 |
2w-6559 Governor Gp
| 03***16 | Bolt-Self Locking; (1/4unc X 3/4) | 3 |
| 0S***16 | Screw,Cap,Hexagon H Receptacle Mtg; Bolt Brackets To Firewall Assembly | 6 |
| 15***28 | Gasket-Governor | 1 |
2w-1605 Lines Gp-Fuel Drain
| 03***46 | Elbow, 90 Deg Adj., 1/4in. J.I.C. X 7/16in.-14 Str. Thd. | 1 |
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 1 |
| 0S***15 | Bolt 19 mm (.75 In.) Long Return Air Console To Enclosed Rops | 2 |
143-1395 Lines Gp-Fuel
| 14***95 | Lines Group-Fuel | 1 |
| 14***68 | Elbow Group | 1 |
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 1 |
4p-9331 Lines Gp-Fuel Injection
| 12***05 | Bracket Assem. | 1 |
| 1W***68 | Clamp-Fuel Line; (Non-Threaded)(Thru Hole) | 4 |
| 1W***69 | Clamp-Fuel Line; (Threaded)(Threaded) | 2 |
4p-9330 Lines Gp-Fuel Injection
| 10***53 | Line As-Fuel Injection; (Cyl No. 3) | 1 |
| 10***54 | Line As-Fuel Injection; (Cyl No. 4) | 1 |
| 1W***67 | Clamp As-Fuel Line (With Spacer) | 2 |
113-5369 Lines Gp-Fuel Injection
| 06***58 | Seal-O-Ring; (Oil Pan Drain Plug) | 1 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
128-7984 Protection Gp-Fuel System
| 12***94 | Bolt-Tamperproof; (28.58mm) | 1 |
| 12***96 | Bolt-Tamperproof; (95.25mm) | 1 |
| 12***84 | Protection Group-Fuel System | 1 |
4p-9827 Pump Gp-Fuel Injection
| 1W***87 | Valve As-Check; (Fuel Injection Pump) | 1 |
| 4P***27 | Pump Group-Fuel Injection | 1 |
| 4P***30 | Plunger & Barrel Assem. | 1 |
111-3769 Pump Gp-Fuel Injection
| 0S***15 | Bolt 19 mm (.75 In.) Long Return Air Console To Enclosed Rops | 4 |
| 11***69 | Pump Group-Fuel Injection | 1 |
| 11***70 | Camshaft Group | 1 |
8n-1180 Pump Gp-Fuel Prm & Prim Filter
| 03***94 | Connector-Flared | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 1 |
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 1 |
8n-5251 Pump Gp-Fuel Prm & Prim Filter
| 1L***69 | Ring-Retaining | 1 |
| 2H***29 | Ring - Retaining External | 1 |
| 2J***57 | Packing,Preformed Screw Assembly Part Of Kit P/N 5r***25 | 1 |
236-2492 Pump Gp-Fuel Priming
| 13***41 | Pump Group-Fuel Priming; (Hand) | 1 |
| 1B***82 | Bolt (1.25 In. Long X .313 In. Dia.) | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 2 |
8n-3365 Pump Gp-Fuel Priming
| 10***08 | Pump As; (Fuel Priming) | 1 |
| 1B***82 | Bolt (1.25 In. Long X .313 In. Dia.) | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 2 |
236-2567 Pump Gp-Fuel Prm & Prim Filter
| 03***94 | Connector-Flared | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 1 |
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 1 |
236-2566 Pump Gp-Fuel Prm & Prim Filter
| 1L***69 | Ring-Retaining | 1 |
| 23***92 | Pump Group-Fuel Priming | 1 |
| 23***66 | Pump Group-Fuel Prm & Prim Filter | 1 |
1w-1695 Pump Gp-Fuel Transfer
| 0S***15 | Bolt 19 mm (.75 In.) Long Return Air Console To Enclosed Rops | 2 |
| 1W***69 | Piston | 1 |
| 1W***95 | Pump Group-Fuel Transfer | 1 |
2w-4160 Pump & Mtg Gp-Fuel Transfer
| 1W***95 | Pump Group-Fuel Transfer | 1 |
| 2W***60 | Pump Group-Fuel Transfer & Mtg; Fuel Transfer Pump And Mounting Group | 1 |
| 4B***65 | Screw,Cap,Hexagon Fuel Injection Pump | 1 |
147-3415 Pump Gp-Gov & Fuel Inj
| 03***79 | Seal-O-Ring (Id=10.82mm) | 1 |
| 11***69 | Pump Group-Fuel Injection | 1 |
| 11***62 | Control Group-Fuel Ratio (Basic) | 1 |
143-1405 Tank Gp-Fuel
| 14***05 | Tank Group-Fuel | 1 |
| 14***36 | Plate; (Fuel Tank Guard) | 1 |
| 14***96 | Plate As | 1 |
144-4061 Tank Gp-Fuel
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***44 | Kit-Repair; (Fuel Level Gauge)(Fuel Level) | 1 |
| 14***60 | Tank As-Fuel | 1 |
255-6489 Tank Gp-Fuel
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***44 | Kit-Repair; (Fuel Level Gauge)(Fuel Level) | 1 |
| 15***95 | Sender As-Fuel Level | 1 |
Hydraulic System
179-9387 Accumulator Gp-Pilot Oil -Uncharged
| 17***87 | Accumulator Group-Pilot Oil; -Uncharged-Dead Engine Lower, Arch, Boom | 1 |
| 20***58 | Film-Warning; (Accumulator)(High Pressure Cylinder) | 2 |
170-8531 Accumulator Gp-Pilot Oil -Charged-Dead Engine Lower, Arch, Boom
| 17***31 | Accumulator Group-Pilot Oil; -Charged-Dead Engine Lower, Arch, Boom | 1 |
| 20***58 | Film-Warning; (Accumulator)(High Pressure Cylinder) | 2 |
231-9072 Cooler Gp-Hydraulic Oil
| 18***21 | Bolt; (M10x1.5x35-mm) | 4 |
| 23***32 | Cooler Group-Hydraulic Oil | 1 |
| 23***72 | Cooler Group-Hydraulic Oil | 1 |
230-8132 Cooler Gp-Hydraulic Oil
| 12***85 | Core As-Hydraulic Oil Cooler | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 2 |
| 14***46 | Elbow, 90, -8 Orb / Orfs | 1 |
231-9073 Cooler Gp-Hydraulic Oil
| 12***85 | Core As-Hydraulic Oil Cooler | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 2 |
| 14***46 | Elbow, 90, -8 Orb / Orfs | 1 |
201-5248 Cylinder Gp-Arch
| 01***71 | Setscrew-Socket; 7.93mm(.312in)Long | 2 |
| 12***02 | Piston | 1 |
| 14***04 | Kit-Seal | 1 |
178-6418 Cylinder Gp-Arch
| 01***71 | Setscrew-Socket; 7.93mm(.312in)Long | 2 |
| 12***02 | Piston | 1 |
| 12***08 | Stop | 1 |
200-3202 Cylinder Gp-Arch
| 13***80 | Piston | 1 |
| 16***95 | Seal As-Buffer | 1 |
| 16***04 | Seal-U-Cup | 1 |
200-3204 Cylinder Gp-Arch
| 13***80 | Piston | 1 |
| 16***95 | Seal As-Buffer | 1 |
| 16***04 | Seal-U-Cup | 1 |
194-5314 Cylinder Gp-Arch -Rh
| 01***71 | Setscrew-Socket; 7.93mm(.312in)Long | 2 |
| 12***02 | Piston | 1 |
| 14***04 | Kit-Seal | 1 |
178-6417 Cylinder Gp-Boom
| 01***71 | Setscrew-Socket; 7.93mm(.312in)Long | 2 |
| 12***02 | Piston | 1 |
| 12***07 | Stop | 1 |
194-5313 Cylinder Gp-Boom
| 01***71 | Setscrew-Socket; 7.93mm(.312in)Long | 2 |
| 12***02 | Piston | 1 |
| 12***08 | Stop | 1 |
200-3195 Cylinder Gp-Boom
| 13***80 | Piston | 1 |
| 16***95 | Seal As-Buffer | 1 |
| 16***04 | Seal-U-Cup | 1 |
160-0492 Cylinder Gp-Lift -Decking Blade
| 14***71 | Rod As | 1 |
| 14***72 | Piston | 1 |
| 16***92 | Cylinder Group-Lift; -Decking Blade | 1 |
204-1502 Cylinder Gp-Tong
| 01***70 | Setscrew | 2 |
| 14***26 | Bushing | 2 |
| 14***31 | Rod As | 1 |
194-3569 Cylinder Gp-Tong
| 01***70 | Setscrew | 2 |
| 19***69 | Cylinder Group-Tong | 1 |
| 20***70 | Bushing | 2 |
264-5172 Cylinder Gp-Tong
| 01***71 | Setscrew-Socket; 7.93mm(.312in)Long | 2 |
| 21***19 | Rod As | 1 |
| 21***20 | Cylinder As | 1 |
168-7874 Cylinder Gp-Tong
| 01***70 | Setscrew | 2 |
| 14***25 | Bushing | 1 |
| 14***26 | Bushing | 2 |
147-0178 Filter Gp-Oil -Winch
| 14***78 | Filter Group-Oil; -Axle Oil Cooler | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
214-6589 Filter Gp-Oil -Hydraulic
| 15***02 | Filter-Oil; (Advanced Efficiency)(Implement/Steering) | 1 |
| 21***89 | Filter Group-Oil; -Hydraulic | 1 |
214-6591 Filter Gp-Oil -Case Drain
| 20***75 | Filter-Oil; (Advanced Efficiency) | 1 |
| 21***91 | Filter Group-Oil; -Hydraulic-Case Drain | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
143-1445 Hydraulic Ar
| 14***27 | Control Group-Steer & Deck Blade | 1 |
| 14***45 | Hydraulic Ar | 1 |
| 14***46 | Control Group-Parking Brake | 1 |
244-6924 Hydraulic Ar
| 14***46 | Control Group-Parking Brake | 1 |
| 14***47 | Lines Group-Steering | 1 |
| 14***50 | Pump & Mtg Group-Hydraulic | 1 |
177-7549 Industrial Ar-Hydraulic
| 14***88 | Valve & Lines Group-Grapple; -Dual Function | 1 |
| 15***07 | Guard Group-Lines | 1 |
| 16***60 | Control Group-Pilot Operated Hydraulic; -Dual Function Grapple | 1 |
143-1442 Lines Gp-Decking Blade
| 10***15 | Connector | 2 |
| 14***42 | Lines Group-Decking Blade | 1 |
| 15***63 | Tube As | 1 |
209-3633 Lines Gp-Grapple
| 10***24 | Hose As | 1 |
| 12***95 | Elbow | 2 |
| 12***88 | Hose As | 1 |
143-2087 Lines Gp-Grapple
| 10***81 | Hose As | 2 |
| 12***22 | Adapter-Orifice; Adapter-Oriface | 1 |
| 12***95 | Elbow | 2 |
268-5730 Lines Gp-Grapple Head
| 14***28 | Connector Assem. | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 14***72 | Elbow Group | 4 |
218-0738 Lines Gp-Hydraulic
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
161-9002 Lines Gp-Hydraulic -Without Grapple
| 12***29 | Tube As | 1 |
| 12***31 | Tube As | 1 |
| 12***32 | Tube As | 1 |
143-1449 Lines Gp-Hydraulic
| 14***49 | Lines Group-Hydraulic | 1 |
| 14***47 | Hose Assem. | 1 |
| 14***05 | Adapter Group | 1 |
126-1348 Motor Gp-Gerotor -Grapple Rotation
| 12***48 | Motor Group-Gerotor; -Grapple Rotation | 1 |
| 12***85 | Kit-Seal | 1 |
| 12***86 | Kit-Seal | 1 |
145-1778 Plug Gp-Grapple Lines
| 14***78 | Plug Group-Grapple Lines | 1 |
| 16***81 | Plug As | 3 |
| 16***34 | Plug As | 3 |
143-1450 Pump & Mtg Gp-Hydraulic
| 10***23 | Coupling | 1 |
| 14***50 | Pump & Mtg Group-Hydraulic | 1 |
| 16***15 | Pump Group-Piston; -Impl, Pilot, Steering, Brake | 1 |
159-5116 Pump Gp-Gear -Winch
| 15***16 | Pump Group-Gear; -Winch | 1 |
161-5715 Pump Gp-Piston -Impl, Pilot, Steering, Brake
| 00***40 | Cone-Roller Bearing | 1 |
| 00***63 | Ring | 1 |
| 03***36 | Seal-O-Ring | 1 |
105-2154 Rotating Gp-Pump -Impl, Steering, Pilot, Brake
| 00***69 | Ring | 1 |
| 10***23 | Plate-Retaining | 1 |
| 10***54 | Rotating Group-Pump; -Impl, Steering, Pilot, Brake | 1 |
143-1451 Tank & Filter Gp-Hydraulic
| 03***35 | Bolt-Self Locking; 2.22cm(.875 In.) Lg | 7 |
| 09***86 | Washer-Plated; (11x25x4.5-mm Thk) | 4 |
| 11***04 | Stud | 2 |
209-8180 Tank & Mtg Gp-Hydraulic
| 20***80 | Tank & Mtg Group-Hydraulic | 1 |
| 20***85 | Plate As | 1 |
| 22***28 | Tank Group-Hydraulic | 1 |
220-8628 Tank Gp-Hydraulic
| 14***08 | Plug As. | 1 |
| 16***48 | Strainer Assem. | 1 |
| 1U***27 | Guide-Valve | 1 |
143-2088 Valve & Lines Gp-Grapple -Dual Function
| 14***88 | Valve & Lines Group-Grapple; -Dual Function | 1 |
| 14***17 | Adapter, -12 Orb / -16 Orfs | 1 |
| 14***30 | Connector As | 1 |
228-3309 Valve & Lines Gp-Grapple -Dual Function
| 14***30 | Connector As | 1 |
| 14***33 | Connector As | 1 |
| 14***35 | Connect Group; (Each Includes) | 1 |
170-4059 Valve Gp-Bank 2 -Decking Blade, Steering
| 10***77 | Valve Group-Priority; -Brake | 1 |
| 10***89 | Valve Group-Control; -Decking Blade | 1 |
| 17***59 | Valve Group-Bank 2; -Decking Blade, Steering | 1 |
183-6649 Valve Gp-Bank 2 -Decking Blade, Steering
| 10***89 | Valve Group-Control; -Decking Blade | 1 |
| 17***82 | Cover | 1 |
| 17***23 | Valve Group-Control; -Steering | 1 |
222-3621 Valve Gp-Bank 2 -Decking Blade, Steering
| 10***88 | Valve Group-Control; -Steering | 1 |
| 10***89 | Valve Group-Control; -Decking Blade | 1 |
| 18***10 | Valve Group-Priority; -Brake | 1 |
185-5806 Valve Gp-Bank 2 -Decking Blade, Steering
| 10***89 | Valve Group-Control; -Decking Blade | 1 |
| 17***23 | Valve Group-Control; -Steering | 1 |
| 18***10 | Valve Group-Priority; -Brake | 1 |
119-1763 Valve Gp-Bank 4 -Grapple Control
| 10***83 | Cover | 1 |
| 10***94 | Valve Group-Control; -Grapple Arch, Grapple Boom | 2 |
| 11***63 | Valve Group-Bank 4; -Grapple Control | 1 |
195-0821 Valve Gp-Bank 4 -Grapple Control
| 10***83 | Cover | 1 |
| 12***75 | Cover As-End | 1 |
| 19***21 | Valve Group-Bank 4; -Grapple Control | 1 |
126-7579 Valve Gp-Control -Grapple Rotation
| 11***72 | Coupling | 1 |
| 11***73 | Coupling | 1 |
| 11***06 | Retainer Spring | 4 |
109-5389 Valve Gp-Control -Decking Blade
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 2 |
| 03***85 | Bolt 5t***57 Plate As To Fuel Pump Group | 1 |
| 10***89 | Valve Group-Control; -Decking Blade | 1 |
171-9821 Valve Gp-Control -Grapple Tong
| 11***72 | Coupling | 1 |
| 11***73 | Coupling | 1 |
| 11***06 | Retainer Spring | 4 |
173-2523 Valve Gp-Control -Steering
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 2 |
| 12***76 | Seat As-Shuttle | 1 |
| 12***96 | Valve Group-Check; (Primary Resolver) | 1 |
126-7580 Valve Gp-Control -Grapple Tong
| 11***72 | Coupling | 1 |
| 11***73 | Coupling | 1 |
| 11***06 | Retainer Spring | 4 |
272-1880 Valve Gp-Control -Grapple Tong
| 11***72 | Coupling | 1 |
| 11***73 | Coupling | 1 |
| 11***06 | Retainer Spring | 4 |
109-5388 Valve Gp-Control -Steering
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 2 |
| 03***85 | Bolt 5t***57 Plate As To Fuel Pump Group | 1 |
| 10***88 | Valve Group-Control; -Steering | 1 |
109-5394 Valve Gp-Control -Grapple Arch, Grapple Boom
| 10***94 | Valve Group-Control; -Grapple Arch, Grapple Boom | 1 |
| 11***16 | Housing | 2 |
| 11***72 | Coupling | 1 |
195-5033 Valve Gp-Control -Grapple Rotation
| 11***72 | Coupling | 1 |
| 11***73 | Coupling | 1 |
| 11***06 | Retainer Spring | 4 |
265-9110 Valve Gp-Control -Grapple Arch, Grapple Boom
| 11***72 | Coupling | 1 |
| 11***73 | Coupling | 1 |
| 11***06 | Retainer Spring | 1 |
195-5233 Valve Gp-Control -Grapple Rotation
| 11***72 | Coupling | 1 |
| 11***73 | Coupling | 1 |
| 11***06 | Retainer Spring | 4 |
121-9479 Valve Gp-Pilot
| 11***75 | Plate-Pivot | 1 |
| 11***86 | Boot | 1 |
| 11***87 | Clamp-Boot | 1 |
113-7142 Valve Gp-Pilot Cartridge
| 11***42 | Valve Group-Pilot Cartridge; -Grapple | 1 |
| 11***57 | Spring | 1 |
| 11***58 | Seat-Spring | 1 |
183-1410 Valve Gp-Priority -Brake
| 10***54 | Spring | 1 |
| 12***76 | Seat As-Shuttle | 1 |
| 18***10 | Valve Group-Priority; -Brake | 1 |
109-5377 Valve Gp-Priority -Brake
| 10***77 | Valve Group-Priority; -Brake | 1 |
| 12***76 | Seat As-Shuttle | 1 |
| 1S***47 | Seal 17.17 mm. (.676 In.) I.D. | 1 |
100-6741 Valve Gp-Pump Control -Pressure, Flow Compensator-Impl, Steering, Pilot, Brake
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 03***36 | Seal-O-Ring | 1 |
| 10***41 | Valve Group-Pump Control; -Pressure, Flow Compensator-Impl, Steering, Pilot, Brake | 1 |
6e-3078 Valve Gp-Selector & Press Cont
| 10***66 | Adapter | 2 |
| 2M***80 | Seal--To Connector Pump Outlet | 2 |
| 5S***01 | Spacer; (7.54x14.15x0.9-mm Thk) | 2 |
167-1555 Valve Gp-Selector & Press Cont
| 10***66 | Adapter | 2 |
| 16***55 | Valve Group-Selector & Press Cont; -Pilot Oil Pressure | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 2 |
185-5805 Valve Gp-Solenoid
| 15***85 | Valve Group-Solenoid; -Hydraulic Oil Cooler Shutoff | 1 |
| 15***56 | Valve Group-Check; -Pilot, Differential Lock Oil | 1 |
| 18***05 | Valve Group-Solenoid | 1 |
126-7971 Valve Gp-Solenoid
| 03***79 | Seal-O-Ring (Id=10.82mm) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***41 | Seal-O-Ring | 1 |
Lubrication System
7c-7734 Fumes Disposal Gp
| 32***54 | Hose | 1 |
| 4D***88 | Clip-(Slot To Fit Fastener M10 Or 3/8) | 1 |
| 5P***30 | Clamp-Hose To Tube | 1 |
4p-8455 Base Gp-Oil Filter
| 1B***90 | Bolt; (5/16-18x1.375-In)(Rh Front Cover) | 2 |
| 1B***75 | Bolt (" " " ); Bolt ( " " " ) | 1 |
| 1P***67 | Plunger; (Engine Oil Cooler Relief Valve) | 2 |
1p-4244 Breather Gp
| 1P***44 | Breather Group | 1 |
| 2W***62 | Breather As-Crankcase; (Engine) | 1 |
| 3H***43 | Bolt,Machine Breather Assembly To Cover | 1 |
2p-9559 Gauge Gp-Oil Level (Dipstick)
| 2P***97 | Tube A Oil Level Gage | 1 |
| 2P***51 | Tube Assembly--Oil Level Gauge Guide | 1 |
| 2P***59 | Gauge Group-Oil Level (Dipstick) | 1 |
2p-6105 Lines Gp-Engine Oil
| 0L***64 | Lock --To Reverse Driven Gear Splash Pan; -- To Reverse Driven Gear Splash Pan | 1 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 1 |
128-4445 Lines Gp-Turbocharger Oil
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 0S***08 | Bolt-Support To Starting Engine Timing Gear Housing | 1 |
5n-8553 Protection Gp-Eng Oil Filler
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 2A***11 | Washer; (5.5x12.3x0.8-mm Thk) | 1 |
| 2P***17 | Hasp-Oil Filler | 1 |
106-8957 Pump Gp-Engine Oil
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 3 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 1 |
| 10***57 | Pump Group-Engine Oil | 1 |
106-8958 Pump Gp-Engine Oil
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 1 |
| 10***58 | Pump Group-Engine Oil | 1 |
| 1P***46 | Washer-Hard; (10.2x35x6-mm Thk) | 1 |
6i-1346 Pump Gp-Engine Oil
| 0T***65 | Bolt--3/8" X 3 1/2"--Use As Required; Bolt 5t***56 Plate To Cover Gp 4n***72 | 3 |
| 1B***09 | Key,Woodruff No. 10 Oil Pump | 1 |
| 1F***06 | Dowel | 1 |
Machine Arrangement
143-1241 Chassis Ar
| 14***38 | Indicator Group-Air Filter Change | 1 |
| 14***41 | Chassis Ar | 1 |
| 14***42 | Support Group-Front Axle | 1 |
146-3802 Common Ar
| 14***41 | Chassis Ar | 1 |
| 14***12 | Power Train Ar | 1 |
| 14***45 | Hydraulic Ar | 1 |
Operator Station
186-6190 Accumulator Gp-Refrigerant -With Desiccant
| 18***90 | Accumulator Group-Refrigerant; -With Desiccant | 1 |
237-3970 Air Compressor Gp-Seat
| 23***70 | Air Compressor Group-Seat | 1 |
147-4564 Air Conditioner Ar
| 11***99 | Duct Group-Air | 1 |
| 14***64 | Air Conditioner Ar | 1 |
| 14***39 | Compressor & Mtg Group-Refrig | 1 |
160-0726 Air Conditioner Gp
| 03***26 | Retainer | 1 |
| 10***41 | Clip; (Slot) | 1 |
| 11***54 | Seal; (160-cm) | 0 |
222-0576 Air Conditioner Gp
| 03***26 | Retainer | 1 |
| 10***41 | Clip; (Slot) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
226-9222 Arm Gp-Window Wiper
| 19***71 | Hose; (116-cm) | 0 |
| 22***22 | Arm Group-Window Wiper | 1 |
| 30***91 | Nozzle As-Washer | 1 |
174-4860 Blower Gp-Cab -Lh
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***81 | Orifice-Lh | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
174-4862 Blower Gp-Cab -Rh
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***88 | Orifice-Rh | 1 |
| 15***61 | Wedge-Plug Lock; (2-Pin) | 1 |
121-2681 Blower Gp-Cab -Lh
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***94 | Wheel-Blower; (Ccw) | 1 |
| 12***81 | Blower Group-Cab; -Lh | 1 |
121-2682 Blower Gp-Cab -Rh
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***95 | Wheel-Blower; (Cw) | 1 |
| 12***82 | Blower Group-Cab; -Rh | 1 |
217-8749 Blower Gp-Cab -Lh
| 03***91 | Pop - Rivet (To Secure Safety Lable) | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***81 | Orifice-Lh | 1 |
217-8750 Blower Gp-Cab -Rh
| 03***91 | Pop - Rivet (To Secure Safety Lable) | 4 |
| 12***88 | Orifice-Rh | 1 |
| 15***61 | Wedge-Plug Lock; (2-Pin) | 1 |
220-1750 Cab Ar-Enclosed Rops
| 14***64 | Air Conditioner Ar | 1 |
| 22***48 | Cab Ar-Enclosed Rops | 1 |
| 22***50 | Cab Ar-Enclosed Rops | 1 |
172-7161 Cab Ar-Enclosed Rops -Grapple
| 14***58 | Cab Ar-Enclosed Rops | 1 |
| 14***64 | Air Conditioner Ar | 1 |
| 17***61 | Cab Ar-Enclosed Rops; -Grapple | 1 |
220-1751 Cab Ar-Enclosed Rops
| 14***64 | Air Conditioner Ar | 1 |
| 22***49 | Cab Ar-Enclosed Rops | 1 |
| 22***51 | Cab Ar-Enclosed Rops | 1 |
220-1749 Cab Ar-Enclosed Rops
| 12***49 | Literature Group | 1 |
| 14***56 | Mounting Group-Rops | 1 |
| 14***76 | Floorplate Group | 1 |
147-4558 Cab Ar-Enclosed Rops
| 12***49 | Literature Group | 1 |
| 14***56 | Mounting Group-Rops | 1 |
| 14***58 | Cab Ar-Enclosed Rops | 1 |
220-1748 Cab Ar-Enclosed Rops
| 12***49 | Literature Group | 1 |
| 14***56 | Mounting Group-Rops | 1 |
| 14***76 | Floorplate Group | 1 |
161-9242 Cab Ar-Enclosed Rops
| 12***49 | Literature Group | 1 |
| 14***56 | Mounting Group-Rops | 1 |
| 14***71 | Wiper & Washer Group-Window | 1 |
172-7162 Cab Ar-Enclosed Rops -Cable
| 14***64 | Air Conditioner Ar | 1 |
| 16***42 | Cab Ar-Enclosed Rops | 1 |
| 17***62 | Cab Ar-Enclosed Rops; -Cable | 1 |
219-2546 Cab Ar-Open Rops
| 12***49 | Literature Group | 1 |
| 14***56 | Mounting Group-Rops | 1 |
| 14***76 | Floorplate Group | 1 |
161-9243 Cab Ar-Open Rops
| 12***49 | Literature Group | 1 |
| 14***56 | Mounting Group-Rops | 1 |
| 14***74 | Control Group-Foot Brake | 1 |
147-4559 Cab Ar-Open Rops
| 12***49 | Literature Group | 1 |
| 14***56 | Mounting Group-Rops | 1 |
| 14***59 | Cab Ar-Open Rops | 1 |
219-2545 Cab Ar-Open Rops
| 12***49 | Literature Group | 1 |
| 14***56 | Mounting Group-Rops | 1 |
| 14***74 | Control Group-Foot Brake | 1 |
148-3039 Compressor & Mtg Gp-Refrig
| 10***80 | Bracket | 1 |
| 10***81 | Bracket As | 1 |
| 12***82 | Support As | 1 |
3e-1906 Compressor Gp-Refrigerant
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 2 |
| 31***18 | Valve As-Pressure Relief; (Refrigerant Compressor) | 1 |
164-3681 Condenser & Mtg Gp-Refrigerant
| 16***80 | Plate | 2 |
| 16***81 | Condenser & Mtg Group-Refrigerant | 1 |
| 16***15 | Core As-Condenser | 1 |
289-8626 Control Gp-Handle -Grapple Control
| 13***66 | Nut; (M14x2-Thd) | 1 |
| 26***99 | Retainer | 1 |
| 26***01 | Switch; (Grapple Auto Grab, Trigger) | 5 |
262-2003 Control Gp-Handle -Grapple Control
| 13***66 | Nut; (M14x2-Thd) | 1 |
| 26***99 | Retainer | 1 |
| 26***00 | Button | 5 |
137-2106 Control Gp-Handle -Grapple Control
| 12***11 | Film-Instruction; (Grapple Rotation) | 1 |
| 12***17 | Screw | 3 |
| 12***18 | Plate | 1 |
238-9804 Control Gp-Joystick -Grapple Control
| 15***06 | Seal-O-Ring; (11.89mm Id) | 1 |
| 22***75 | Kit-Swivel | 1 |
| 22***76 | Kit-Pin | 4 |
223-4368 Control Gp-Joystick -Grapple Control
| 10***51 | Loom; (39 cm) | 0 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 17***08 | Switch As-Limit | 5 |
183-4485 Control Gp-Joystick -Grapple Control
| 10***51 | Loom; (39 cm) | 0 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 17***08 | Switch As-Limit | 4 |
160-1760 Control Gp-Pilot Operated Hyd -Dual Function Grapple
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***79 | Valve Group-Pilot; -Grapple | 1 |
| 12***29 | Tube As | 1 |
159-3971 Control Gp-Steering
| 11***09 | Cover Assem. (R. H.) | 1 |
| 11***12 | Cover Assem. (L. H.) | 1 |
| 11***08 | Steering Column As | 1 |
159-3976 Dash Gp
| 10***67 | Bezel | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***01 | Plate | 1 |
246-5095 Door Gp-Cab -Rh
| 12***44 | Link-Connecting | 1 |
| 12***82 | Latch As | 1 |
| 19***56 | Plate | 2 |
246-5229 Door Gp-Cab
| 10***11 | Screw-Machine; (3/8-16x0.75-In) | 2 |
| 10***29 | Guard-Striker | 2 |
| 11***48 | Striker As-Latch | 2 |
160-0244 Door Gp-Cab -Lh
| 10***95 | Handle As | 1 |
| 11***84 | Hinge As; (Outer) | 1 |
| 12***44 | Link-Connecting | 1 |
159-3978 Door Gp-Cab
| 10***11 | Screw-Machine; (3/8-16x0.75-In) | 1 |
| 10***29 | Guard-Striker | 1 |
| 11***48 | Striker As-Latch | 2 |
246-5097 Door Gp-Cab -Lh
| 10***95 | Handle As | 1 |
| 12***44 | Link-Connecting | 1 |
| 12***83 | Latch As | 1 |
160-0243 Door Gp-Cab -Rh
| 11***84 | Hinge As; (Outer) | 1 |
| 12***44 | Link-Connecting | 1 |
| 12***82 | Latch As | 1 |
222-3689 Door Gp-Cab -Lh
| 10***95 | Handle As | 1 |
| 11***84 | Hinge As; (Outer) | 1 |
| 12***44 | Link-Connecting | 1 |
222-3688 Door Gp-Cab -Rh
| 11***84 | Hinge As; (Outer) | 1 |
| 12***44 | Link-Connecting | 1 |
| 12***82 | Latch As | 1 |
118-5399 Duct Gp-Air
| 10***91 | Boot | 2 |
| 11***57 | Adapter | 1 |
| 11***99 | Duct Group-Air | 1 |
160-7685 Fan Gp-Defroster
| 03***83 | Screw-Machine | 5 |
| 12***09 | Fan Group-Defroster | 1 |
| 16***85 | Fan Group-Defroster | 1 |
157-2173 Guard Gp-Enclosed Rops
| 09***79 | Plug | 1 |
| 15***73 | Guard Group-Enclosed Rops | 1 |
| 20***80 | Plate As | 1 |
217-7368 Guard Gp-Enclosed Rops
| 09***79 | Plug | 1 |
| 21***68 | Guard Group-Enclosed Rops | 1 |
| 21***71 | Plate As | 1 |
157-3457 Guard Gp-Open Rops
| 09***79 | Plug | 1 |
| 12***95 | Plate As | 1 |
| 15***57 | Guard Group-Open Rops | 1 |
221-2657 Guard Gp-Open Rops
| 22***57 | Guard Group-Open Rops | 1 |
| 22***21 | Plate As | 1 |
| 7X***29 | Washer; (11x25x3-mm Thk) | 13 |
122-7169 Housing Gp-Seat Suspension
| 09***78 | Pin-Spring | 1 |
| 10***24 | Kit-Indicator; (Weight Adjustment)(Suspension Seat) | 1 |
| 10***79 | Kit-Bumper; (Weight Adjustment)(Suspension Seat) | 1 |
154-6738 Installation Gp-Radio
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 12***78 | Locknut; (M6x1-Thd) | 4 |
| 15***38 | Installation Group-Radio | 1 |
164-3682 Lines Gp-Air Conditioner
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
| 11***33 | Switch As-Pressure; (A/C) | 1 |
126-3749 Literature Gp
| 12***49 | Literature Group | 1 |
| 18***48 | Key | 1 |
| 1F***03 | Washer | 2 |
159-3979 Mirror Gp-Rear View -Interior
| 12***08 | Bracket As | 2 |
| 15***79 | Mirror Group-Rear View; -Interior | 1 |
| 3K***60 | Nut, Hex (3/8 - 16 Nc, Plastic Insert) | 1 |
100-5895 Module Gp-Quad Gauge
| 10***95 | Module Group-Quad Gauge; (Quad Gauge Module) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 3E***83 | Wedge-Receptacle Lock; (6-Pin) | 1 |
166-6928 Module Gp-Quad Gauge
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 16***28 | Module Group-Quad Gauge; -Engine Coolant Temp, Transmission Oil Temp, Hydraulic Oil Temp, Fuel Level | 1 |
| 8T***29 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 6 |
143-2056 Mounting Gp-Rops
| 14***56 | Mounting Group-Rops | 1 |
| 16***28 | Sleeve-Tapered | 4 |
| 28***88 | Bolt; (M30x3.5x150-mm), Belt Tensioner | 4 |
245-7707 Panel Gp-Access -Rops, Rh
| 1D***64 | Grab Iron) | 1 |
| 24***07 | Panel Group-Access; -Rops, Rh | 1 |
| 25***84 | Panel As; (Rh) | 1 |
245-7704 Panel Gp-Access -Lh
| 1D***64 | Grab Iron) | 1 |
| 24***04 | Panel Group-Access; -Lh | 1 |
| 25***83 | Panel As-Access; (Lh) | 1 |
157-2048 Pressurizer Gp-Cab
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 8 |
| 12***81 | Blower Group-Cab; -Lh | 1 |
| 12***82 | Blower Group-Cab; -Rh | 1 |
222-0575 Pressurizer Gp-Cab
| 11***57 | Seal | 0 |
| 12***61 | Grill-Air Filter; (Cab) | 1 |
| 13***37 | Spacer | 4 |
204-0363 Radio Gp -Am/Fm/Wb Cd Player
| 10***82 | Sleeve | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 13***90 | Bushing; (Radio Mount) | 1 |
148-9792 Rops Gp
| 12***91 | Handrail As | 2 |
| 12***92 | Handrail As | 2 |
| 14***44 | Rops As | 1 |
215-2675 Rops Gp
| 12***39 | Seal; (81.5-cm Each) | 0 |
| 21***75 | Rops Group | 1 |
| 21***80 | Guard As | 1 |
221-9204 Screen Gp-Cab
| 12***09 | Seal; (27.3cm Each) | 0 |
| 12***19 | Seal; (177-cm Each) | 0 |
| 12***63 | Seal; (395-cm Each) | 0 |
174-6354 Screen Gp-Cab
| 13***39 | Screw-Flat Head; (M8x1.25x30-mm) | 5 |
| 17***46 | Channel As | 1 |
| 17***47 | Channel As | 1 |
158-7800 Screen Gp-Cab
| 12***09 | Seal; (27.3cm Each) | 0 |
| 12***19 | Seal; (177-cm Each) | 0 |
| 12***63 | Seal; (395-cm Each) | 0 |
221-9193 Screen Gp-Cab
| 22***93 | Screen Group-Cab | 1 |
| 22***48 | Screen As; (Right Side) | 1 |
| 22***49 | Screen As; (Left Side) | 1 |
122-4620 Seat Gp -Vinyl
| 12***20 | Seat Group; -Vinyl | 1 |
| 12***63 | Seat As | 1 |
| 12***64 | Cushion As-Arm | 1 |
122-4622 Seat Gp -Cloth
| 12***22 | Seat Group; -Cloth | 1 |
| 12***63 | Seat As | 1 |
| 12***64 | Cushion As-Arm | 1 |
173-5363 Seat Gp-Suspension
| 12***20 | Seat Group; -Vinyl | 1 |
| 12***66 | Bracket | 2 |
| 17***30 | Screw-Button Head; (3/8-16x1-In) | 2 |
222-1250 Seat Gp-Suspension
| 12***22 | Seat Group; -Cloth | 1 |
| 12***66 | Bracket | 2 |
| 17***35 | Block Kit; (Includes Bolt, Washers, Blocks And Setscrews) | 0 |
173-5366 Seat Gp-Suspension
| 12***22 | Seat Group; -Cloth | 1 |
| 12***66 | Bracket | 2 |
| 17***30 | Screw-Button Head; (3/8-16x1-In) | 2 |
173-5372 Seat Gp-Suspension
| 17***63 | Seat Group-Suspension | 1 |
| 17***72 | Seat Group-Suspension | 1 |
| 22***51 | Seat Group-Suspension | 1 |
160-8664 Seat Gp-Suspension
| 12***18 | Suspension Group-Seat | 1 |
| 12***20 | Seat Group; -Vinyl | 1 |
| 12***66 | Bracket | 2 |
173-5373 Seat Gp-Suspension
| 17***66 | Seat Group-Suspension | 1 |
| 17***73 | Seat Group-Suspension | 1 |
| 22***50 | Seat Group-Suspension | 1 |
222-1251 Seat Gp-Suspension
| 12***20 | Seat Group; -Vinyl | 1 |
| 12***66 | Bracket | 2 |
| 20***23 | Suspension Group-Seat; -Swivel, Slide | 1 |
160-8665 Seat Gp-Suspension
| 12***18 | Suspension Group-Seat | 1 |
| 12***22 | Seat Group; -Cloth | 1 |
| 12***66 | Bracket | 2 |
191-4508 Suspension Gp-Seat -Air
| 10***03 | Fastener | 28 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***11 | Screw-Machine; (3/8-16x0.75-In) | 1 |
122-4618 Suspension Gp-Seat
| 00***81 | Ring-Retaining | 1 |
| 03***43 | Nut; (5/16-18 Thd) | 8 |
| 09***78 | Pin-Spring | 1 |
122-7160 Suspension Gp-Seat
| 10***03 | Fastener | 20 |
| 10***94 | Kit-Tether Belt; (Suspension Seat)(Seat Suspension) | 1 |
| 10***95 | Kit-Suspension Roller; (Suspension Seat)(Seat Suspension) | 1 |
173-5364 Suspension Gp-Seat -Air
| 10***17 | Bumper | 4 |
| 12***57 | Shaft | 1 |
| 12***66 | Kit-Wiring Harness; (Air Suspension Seat) | 1 |
201-3423 Suspension Gp-Seat -Swivel, Slide
| 17***30 | Screw-Button Head; (3/8-16x1-In) | 4 |
| 17***65 | Swivel Group-Seat | 1 |
| 17***67 | Seat Belt As | 2 |
173-5365 Swivel Gp-Seat
| 00***81 | Ring-Retaining | 1 |
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 4 |
| 09***78 | Pin-Spring | 1 |
8r-1774 Tank Gp-Window Washer
| 3W***98 | Cap; (Window Washer Tank Fill) | 1 |
| 3W***99 | Packing | 1 |
| 7T***90 | Pump As; (Washer) | 2 |
161-9244 Trim Gp-Cab
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 22 |
| 11***02 | Louver As-Vent | 2 |
| 11***19 | Screw-Flat Head; (No 6x1-In) | 14 |
245-8899 Trim Gp-Cab -Cable Machine, Open Rops
| 12***23 | Grill | 2 |
| 12***40 | Plug | 1 |
| 12***05 | Cover; (Rh) | 1 |
245-8896 Trim Gp-Cab -Grapple Machine, Enclosed Rops
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 22 |
| 11***02 | Louver As-Vent | 2 |
| 11***19 | Screw-Flat Head; (No 6x1-In) | 14 |
148-9773 Trim Gp-Cab
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 22 |
| 11***02 | Louver As-Vent | 2 |
| 11***19 | Screw-Flat Head; (No 6x1-In) | 14 |
245-8897 Trim Gp-Cab
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 22 |
| 11***02 | Louver As-Vent | 2 |
| 11***19 | Screw-Flat Head; (No 6x1-In) | 14 |
245-8898 Trim Gp-Cab -Grapple Machine, Open Rops
| 12***23 | Grill | 2 |
| 12***40 | Plug | 1 |
| 12***05 | Cover; (Rh) | 1 |
148-9842 Trim Gp-Open Rops
| 11***19 | Screw-Flat Head; (No 6x1-In) | 14 |
| 12***23 | Grill | 2 |
| 12***24 | Grill | 2 |
161-9245 Trim Gp-Open Rops
| 11***19 | Screw-Flat Head; (No 6x1-In) | 14 |
| 12***23 | Grill | 2 |
| 12***24 | Grill | 2 |
157-3408 Window Gp
| 11***54 | Seal; (160-cm) | 0 |
| 12***45 | Window-Side; (Lexan, Light Green Tint)(Rear, Lh, Rh) | 2 |
| 12***19 | Seal; (177-cm Each) | 0 |
119-7215 Window Gp-Door -Lh
| 03***38 | Screw; (6-32x1.0in) | 2 |
| 11***15 | Window Group-Door; -Lh | 1 |
| 13***24 | Rail-Lh | 1 |
220-3357 Window Gp-Door -Rh
| 13***70 | Seal; (326-cm) | 0 |
| 15***15 | Gasket | 1 |
| 18***27 | Catch Assem.; (L.H.) | 1 |
220-3358 Window Gp-Door -Lh
| 13***70 | Seal; (326-cm) | 0 |
| 15***15 | Gasket | 1 |
| 19***40 | Seal; (8-cm) | 0 |
119-7214 Window Gp-Door -Rh
| 03***38 | Screw; (6-32x1.0in) | 2 |
| 11***14 | Window Group-Door; -Rh | 1 |
| 13***21 | Hinge-Rh | 3 |
216-7849 Wiper & Washer Gp-Window
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***64 | Actuator-Rocker | 1 |
| 12***65 | Switch As-Rocker; (Wiper Front) | 2 |
148-9771 Wiper & Washer Gp-Window
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
223-5949 Wiper Gp-Window
| 13***11 | Motor Group-Window Wiper; (24-Volt, 2-Speed)(Front) | 1 |
| 22***49 | Wiper Group-Window | 1 |
| 22***68 | Plate | 1 |
Power Train
6d-0337 Valve Gp-Tire
| 2D***28 | Core-Valve | 1 |
| 2D***29 | Grommet | 1 |
| 2D***30 | Washer-Ring | 1 |
141-6755 Axle Ar-Fixed -Rear
| 14***55 | Axle Ar-Fixed; -Rear | 1 |
| 14***56 | Housing Group-Fixed Axle | 1 |
| 14***65 | Gear Group-Bevel & Pinion | 1 |
203-7728 Axle Ar-Oscillating -Front
| 13***26 | Brake & Planetary Group | 2 |
| 13***83 | Gear Group-Bevel & Pinion | 1 |
| 18***87 | Differential Group; -Locking | 1 |
139-4124 Axle Ar-Oscillating
| 13***24 | Axle Ar-Oscillating | 1 |
| 13***25 | Housing Group-Oscillating Axle | 1 |
| 13***26 | Brake & Planetary Group | 2 |
186-0886 Axle Ar-Oscillating -Front
| 13***25 | Housing Group-Oscillating Axle | 1 |
| 13***26 | Brake & Planetary Group | 2 |
| 13***83 | Gear Group-Bevel & Pinion | 1 |
139-4126 Brake & Planetary Gp
| 13***52 | Dowel | 4 |
| 13***45 | Pin-Spring | 3 |
| 13***26 | Brake & Planetary Group | 1 |
141-6773 Brake & Planetary Gp
| 13***45 | Pin-Spring | 3 |
| 14***73 | Brake & Planetary Group | 1 |
| 14***77 | Gear-Sun; (18 Teeth) | 1 |
277-8579 Case & Parts Gp-Transmission
| 12***01 | Clip | 1 |
| 12***02 | Clip Assem. | 7 |
| 13***89 | Clip; (Ladder) | 3 |
142-8551 Case Gp-Differential
| 14***51 | Case Group-Differential | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 12 |
| 5P***47 | Washer (Bracket To Valve Support) | 4 |
147-5657 Clutch Gp -First, Third
| 10***36 | Ring-Retaining | 2 |
| 11***71 | Piston | 1 |
| 14***57 | Clutch Group; -First, Third | 1 |
147-5655 Clutch Gp -Forward High, Forward Low
| 11***71 | Piston | 2 |
| 14***97 | Gear; (64 And 53 Teeth) | 1 |
| 14***55 | Clutch Group; -Forward High, Forward Low | 1 |
147-5656 Clutch Gp -Reverse, Second
| 11***71 | Piston | 2 |
| 14***97 | Gear; (64 And 53 Teeth) | 1 |
| 14***56 | Clutch Group; -Reverse, Second | 1 |
154-3951 Cover Gp-Shipping
| 15***51 | Cover Group-Shipping | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 8 |
| 1S***95 | Gasket; (Oil Supply) | 1 |
139-4127 Differential Gp
| 12***60 | Screw-Flat Head; (M6x1x16-mm) | 8 |
| 12***42 | Washer-Thrust | 1 |
| 13***27 | Differential Group | 1 |
184-3588 Differential Gp
| 12***60 | Screw-Flat Head; (M6x1x16-mm) | 8 |
| 12***39 | Spider | 1 |
| 12***41 | Gear-Differential Bevel; (18-Teeth) | 1 |
184-3587 Differential Gp -Locking
| 12***60 | Screw-Flat Head; (M6x1x16-mm) | 8 |
| 12***42 | Washer-Thrust | 1 |
| 13***28 | Gear-Bevel; (Differential Lock, 16-Teeth) | 1 |
141-6768 Differential Gp
| 12***60 | Screw-Flat Head; (M6x1x16-mm) | 8 |
| 12***39 | Spider | 1 |
| 12***41 | Gear-Differential Bevel; (18-Teeth) | 1 |
163-0397 Drain Gp-Ecology
| 07***41 | Seal; (30.3mm Od) | 1 |
| 16***97 | Drain Group-Ecology; -Transmission Case | 1 |
| 17***66 | Drain Group-Ecology; (Final Drive) | 1 |
143-1416 Filler Gp-Power Train Oil
| 14***16 | Filler Group-Power Train Oil | 1 |
| 16***23 | Plate As | 1 |
| 16***48 | Tube As | 1 |
143-1417 Filter & Lines Gp-Power Train
| 03***70 | Adapter-Pipe | 1 |
| 03***06 | Adapter-Pipe; (To Transmission) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
222-5806 Filter Gp-Oil -Power Train
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
| 22***06 | Filter Group-Oil; -Power Train | 1 |
160-7752 Filter Gp-Oil -Power Train
| 10***28 | Filter-Oil; (Ultra High Efficiency) | 1 |
| 16***52 | Filter Group-Oil; -Pump Case Drain-Brake Cooling | 1 |
| 16***09 | Plug As-Hydraulic | 1 |
141-6765 Gear Gp-Bevel & Pinion
| 03***60 | Cup-Roller Bearing | 1 |
| 03***61 | Cone-Roller Bearing | 1 |
| 13***98 | Cup-Roller Bearing | 1 |
139-4183 Gear Gp-Bevel & Pinion
| 03***60 | Cup-Roller Bearing | 1 |
| 03***61 | Cone-Roller Bearing | 1 |
| 11***84 | Sleeve As | 1 |
147-5658 Gear Gp-Output Transfer
| 11***91 | Brake Group-Parking | 1 |
| 14***47 | Cage-Bearing | 1 |
| 14***29 | Yoke-Brake | 1 |
141-6756 Housing Gp-Fixed Axle
| 07***41 | Seal; (30.3mm Od) | 1 |
| 09***04 | Bolt-Socket Head; (M12x1.75x110-mm) | 4 |
| 12***03 | Seal-Lip Type; (7602mm Id) | 1 |
139-4125 Housing Gp-Oscillating Axle
| 09***04 | Bolt-Socket Head; (M12x1.75x110-mm) | 4 |
| 10***86 | Valve As-Drain; (Ecology) | 1 |
| 12***03 | Seal-Lip Type; (7602mm Id) | 1 |
203-7727 Housing Gp-Oscillating Axle
| 07***41 | Seal; (30.3mm Od) | 1 |
| 09***04 | Bolt-Socket Head; (M12x1.75x110-mm) | 4 |
| 12***03 | Seal-Lip Type; (7602mm Id) | 1 |
147-5654 Input Gp-Transmission
| 14***96 | Gear; (34 & 41 Teeth) | 1 |
| 14***89 | Carrier-Seal | 1 |
| 14***90 | Shaft | 1 |
143-1422 Lines Gp-Differential Lock
| 14***22 | Lines Group-Differential Lock | 1 |
| 14***98 | Hose Assem. | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 3 |
143-1421 Lines Gp-Torque Conv Cooler
| 11***04 | Spacer | 1 |
| 14***21 | Lines Group-Torque Conv Cooler | 1 |
| 14***25 | Tee As | 1 |
213-6311 Mounting Gp-Rim
| 14***69 | Stud | 80 |
| 21***11 | Mounting Group-Rim | 1 |
| 2J***05 | Nut Rim To Adapter And Adapter To Wheel | 80 |
148-9162 Mounting Gp-Rim
| 14***69 | Stud | 80 |
| 14***62 | Mounting Group-Rim | 1 |
| 2J***05 | Nut Rim To Adapter And Adapter To Wheel | 80 |
143-1412 Power Train Ar
| 13***24 | Axle Ar-Oscillating | 1 |
| 14***55 | Axle Ar-Fixed; -Rear | 1 |
| 14***12 | Power Train Ar | 1 |
145-7266 Pump Gp-Transmission
| 14***66 | Pump Group-Transmission | 1 |
| 14***68 | Gear As-Oil Pump; (17-Teeth) | 1 |
| 14***11 | Cover As | 1 |
149-8352 Rim Gp-Demountable
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 8 |
| 14***40 | Band As | 1 |
| 14***41 | Ring-Lock | 1 |
149-8350 Rim Gp-Demountable
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 8 |
| 14***40 | Band As | 1 |
| 14***41 | Ring-Lock | 1 |
206-9123 Shaft Gp-Drive
| 17***33 | Bearing As-Pillow Block | 1 |
| 19***67 | Setscrew | 1 |
| 20***23 | Shaft Group-Drive | 1 |
143-1423 Shaft Gp-Drive
| 14***23 | Shaft Group-Drive | 1 |
| 14***24 | Shaft As-Drive; (Rear) | 1 |
| 14***26 | Shaft As-Slip | 1 |
143-1242 Support Gp-Front Axle
| 14***27 | Plate As | 1 |
| 14***42 | Support Group-Front Axle | 1 |
| 15***59 | Seal-Lip Type | 2 |
149-8372 Tire & Rim Ar
| 14***64 | Tire & Rim Group | 4 |
| 14***72 | Tire & Rim Ar | 1 |
205-7345 Tire & Rim Ar
| 20***43 | Tire & Rim Group | 4 |
| 20***45 | Tire & Rim Ar | 1 |
204-5309 Tire & Rim Ar
| 20***08 | Tire & Rim Group | 4 |
| 20***09 | Tire & Rim Ar | 1 |
205-7342 Tire & Rim Ar
| 20***41 | Tire & Rim Group | 4 |
| 20***42 | Tire & Rim Ar | 1 |
149-8373 Tire & Rim Ar
| 14***63 | Tire & Rim Group | 4 |
| 14***73 | Tire & Rim Ar | 1 |
204-5308 Tire & Rim Gp
| 14***62 | Tire; (35.5-32) | 1 |
| 20***08 | Tire & Rim Group | 1 |
| 23***39 | Rim As; (27x32) | 1 |
205-7343 Tire & Rim Gp
| 14***62 | Tire; (35.5-32) | 1 |
| 20***07 | Rim As | 1 |
| 20***43 | Tire & Rim Group | 1 |
149-8367 Tire & Rim Gp
| 14***52 | Rim Group-Demountable | 1 |
| 14***67 | Tire & Rim Group | 1 |
| 2L***55 | Cap (Small) | 1 |
149-8363 Tire & Rim Gp
| 14***47 | Rim As | 1 |
| 14***62 | Tire; (35.5-32) | 1 |
| 14***63 | Tire & Rim Group | 1 |
205-7341 Tire & Rim Gp
| 13***80 | Tire & Tube Group; (30.5-32) | 1 |
| 20***06 | Rim As; (27x32) | 1 |
| 20***41 | Tire & Rim Group | 1 |
149-8369 Tire & Rim Gp
| 14***50 | Rim Group-Demountable | 1 |
| 14***69 | Tire & Rim Group | 1 |
| 2L***55 | Cap (Small) | 1 |
149-8364 Tire & Rim Gp
| 13***80 | Tire & Tube Group; (30.5-32) | 1 |
| 14***46 | Rim As; (27x32) | 1 |
| 14***64 | Tire & Rim Group | 1 |
205-7351 Tire & Rim Gp
| 20***08 | Rim As | 1 |
| 20***51 | Tire & Rim Group | 1 |
| 2L***55 | Cap (Small) | 1 |
144-7659 Torque Converter Gp -Lockup
| 06***43 | Ring-Snap | 1 |
| 11***27 | Ball Bearing | 1 |
| 12***94 | Seal-O-Ring | 1 |
147-5653 Transmission Ar
| 14***59 | Torque Converter Group; -Lockup | 1 |
| 14***66 | Pump Group-Transmission | 1 |
| 14***53 | Transmission Ar | 1 |
8e-5523 Valve Gp-Dump -Transmission
| 2M***80 | Seal--To Connector Pump Outlet | 2 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
176-0629 Valve Gp-Flow Control -Transmission
| 17***29 | Valve Group-Flow Control; -Transmission | 1 |
| 2L***26 | Ring-Retaining | 1 |
| 4M***45 | Spring (.0625" Dia.) | 1 |
244-3114 Valve Gp-Modulating
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
| 21***73 | Nut; (1/2-28-Thd) | 1 |
6i-8723 Valve Gp-Selector & Press Cont -Transmission
| 13***79 | Valve Group-Solenoid; -Clutch | 6 |
| 2M***80 | Seal--To Connector Pump Outlet | 4 |
| 4J***33 | Seal Fuel Injection Pump | 1 |
136-1679 Valve Gp-Solenoid
| 10***15 | Cartridge Assem. | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***47 | Locknut; (5/8-11-Thd) | 1 |
152-8385 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***43 | Locknut; (5/16-18-Thd) | 1 |
| 15***83 | Cartridge As | 1 |
116-4152 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***70 | Locknut; (1/4-20-Thd) | 1 |
| 11***52 | Valve Group-Solenoid; -Tcs On/Off Pilot Pressure | 1 |
186-1526 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***47 | Locknut; (5/8-11-Thd) | 1 |
| 18***26 | Valve Group-Solenoid; (24-Volt)(Transmission Clutch) | 1 |
165-5942 Valve Gp-Transmission Control
| 14***67 | Poppet | 1 |
| 16***42 | Valve Group-Transmission Control | 1 |
| 17***77 | Manifold | 1 |
Service Equipment And Supplies
166-1255 Film Gp
| 12***77 | Film-Stripe; (Curved) | 2 |
| 12***78 | Film-Stripe; (Straight)(735-cm) | 0 |
| 16***55 | Film Group | 1 |
205-8130 Guard Gp-Water Tank
| 20***30 | Guard Group-Water Tank | 1 |
| 20***34 | Plate As | 1 |
| 20***40 | Plate As | 1 |
207-1393 Kit-Water Tank
| 20***64 | Tank Ar-Water | 1 |
| 20***80 | Plate As | 1 |
| 20***81 | Plate As | 1 |
205-8129 Lines Gp-Pressurized Water
| 00***44 | Elbow; (45-Deg) | 1 |
| 10***05 | Elbow; (90 Degree) | 1 |
| 11***31 | Hose As | 1 |
164-7547 Plate & Film Gp -Cab
| 12***13 | Film-Instruction | 1 |
| 12***34 | Film-Instruction | 1 |
| 16***47 | Plate & Film Group; -Cab | 1 |
148-8099 Plate & Film Gp
| 10***30 | Film; (Warning) (Accumulator Pressure) (On Bracket Covering Brake Accumulator) | 2 |
| 11***25 | Film-Identification; (Transmission Tank Fill Cap) | 1 |
| 13***89 | Film-Information; (Fuel Filter) | 1 |
204-0364 Tank Ar-Water
| 20***09 | Film-Warning; (Tank Pressure) | 0 |
| 20***64 | Tank Ar-Water | 1 |
| 20***29 | Lines Group-Pressurized Water | 1 |
205-8131 Tank Gp-Water
| 20***31 | Tank Group-Water | 1 |
| 20***32 | Tank As | 1 |
| 20***54 | Plate As | 1 |
Steering System
143-1427 Control Gp-Steer & Deck Blade
| 13***40 | Lever As | 1 |
| 14***27 | Control Group-Steer & Deck Blade | 1 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 1 |
185-5827 Control Gp-Steer & Deck Blade
| 13***40 | Lever As | 1 |
| 14***51 | Shaft As | 1 |
| 14***21 | Lever As | 1 |
165-0176 Cylinder Gp-Steering -Lh
| 14***91 | Bracket As | 1 |
| 16***76 | Cylinder Group-Steering; -Lh | 1 |
| 16***80 | Rod As | 1 |
165-0179 Cylinder Gp-Steering -Rh
| 14***91 | Bracket As | 1 |
| 16***79 | Cylinder Group-Steering; -Rh | 1 |
| 16***80 | Rod As | 1 |
178-3542 Lines Gp-Secondary Steering
| 10***47 | Hose As | 1 |
| 14***27 | Connector Group | 1 |
| 14***35 | Connect Group; (Each Includes) | 1 |
143-1447 Lines Gp-Steering
| 10***15 | Connector | 2 |
| 14***47 | Lines Group-Steering | 1 |
| 14***28 | Connector Assem. | 4 |
177-9742 Pump & Motor Gp-Sec Steering
| 11***15 | Motor Group-Electric; -Engine Prelubrication-Sec Steering, Brake Release | 1 |
| 17***42 | Pump & Motor Group-Sec Steering | 1 |
| 17***43 | Pump Group-Gear; (Secondary Steering) | 1 |
192-0486 Pump & Mtg Gp-Secondary Steer
| 17***42 | Pump & Motor Group-Sec Steering | 1 |
| 19***86 | Pump & Mtg Group-Secondary Steer | 1 |
| 19***57 | Bracket As | 1 |
175-4829 Pump & Mtg Gp-Secondary Steer
| 17***24 | Plate As | 1 |
| 17***29 | Pump & Mtg Group-Secondary Steer | 1 |
| 17***42 | Pump & Motor Group-Sec Steering | 1 |
180-1617 Steering Ar-Secondary
| 17***29 | Pump & Mtg Group-Secondary Steer | 1 |
| 17***42 | Lines Group-Secondary Steering | 1 |
| 17***15 | Wiring Group-Secondary Steering | 1 |
123-7406 Steering Wheel Gp
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***86 | Bolt; (M4x.7x12mm)(M4x0.7x12mm) | 2 |
| 11***05 | Wheel | 1 |
Work Tools
159-1537 Arch Ar-Fairlead -Cable Machine
| 15***46 | Frame Group-Fairlead; -Cable Machine | 1 |
| 15***37 | Arch Ar-Fairlead; -Cable Machine | 1 |
| 16***41 | Roller Group-Top | 1 |
184-1154 Arch Ar-Fairlead -Cable Machine-Heavy-Duty Cable
| 16***41 | Roller Group-Top | 1 |
| 16***42 | Fairlead Group-Winch; -Cable Machine | 1 |
| 16***61 | Bearing & Seal Group-Arch; -Cable Machine | 1 |
162-2261 Bearing & Seal Gp-Arch -Cable Machine
| 13***68 | Washer; (60x120x1.6-mm Thk)(1.6mm Thk) | 2 |
| 13***69 | Washer; (60x120x3.1-mm Thk)(3.1mm Thk) | 4 |
| 16***61 | Bearing & Seal Group-Arch; -Cable Machine | 1 |
161-1512 Bearing & Seal Gp-Grapple -Dual Function
| 13***68 | Washer; (60x120x1.6-mm Thk)(1.6mm Thk) | 4 |
| 13***69 | Washer; (60x120x3.1-mm Thk)(3.1mm Thk) | 2 |
| 16***12 | Bearing & Seal Group-Grapple; -Dual Function | 1 |
143-1426 Blade Ar-Decking
| 14***26 | Blade Ar-Decking | 1 |
| 14***30 | Blade Group-Decking; -Wide | 1 |
| 14***42 | Lines Group-Decking Blade | 1 |
143-1430 Blade Gp-Decking -Wide
| 14***30 | Blade Group-Decking; -Wide | 1 |
| 14***72 | Blade As-Decking | 1 |
| 16***77 | Edge Group-Cutting | 1 |
255-9286 Boom Gp-Grapple -Dual Function Frame
| 20***44 | Boom As-Grapple | 1 |
| 20***66 | Plate-Cover | 1 |
| 25***86 | Boom Group-Grapple; -Dual Function Frame | 1 |
161-6407 Brake Gp-Winch
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 11***34 | Retaining Ring | 1 |
| 11***67 | Brake Spring | 2 |
166-2910 Brake Gp-Winch
| 11***90 | O-Ring | 1 |
| 16***07 | Brake Group-Winch | 1 |
| 16***32 | Seal-Carrier | 1 |
173-9891 Case Gp-Winch
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 10 |
| 11***83 | Sight Gauge (Includes Item 28) | 1 |
| 11***64 | Suction Strainer | 1 |
161-6411 Case Gp-Winch
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 10 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 11***83 | Sight Gauge (Includes Item 28) | 1 |
193-7417 Case Gp-Winch
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 6 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 10***86 | Valve As-Drain; (Ecology) | 1 |
161-6405 Clutch & Gear Gp-Winch
| 16***05 | Clutch & Gear Group-Winch | 1 |
| 16***19 | Cover-Gear | 1 |
| 16***20 | Gasket | 1 |
161-6437 Clutch Gp-Winch
| 11***49 | Check Valve Seat | 1 |
| 11***34 | Retaining Ring | 1 |
| 11***95 | Retaining Ring | 1 |
173-9881 Clutch Gp-Winch
| 00***01 | Cone-Bearing | 2 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 7 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 3 |
173-9882 Clutch Gp-Winch
| 11***49 | Check Valve Seat | 1 |
| 11***34 | Retaining Ring | 1 |
| 11***95 | Retaining Ring | 1 |
162-0121 Clutch Gp-Winch
| 00***01 | Cone-Bearing | 2 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 7 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 3 |
159-2817 Control Gp-Winch
| 09***49 | Bolt; (M8x1.25x40-mm) | 1 |
| 10***98 | End-Yoke Rod | 1 |
| 12***42 | Rod | 1 |
206-4529 Control Gp-Winch
| 12***42 | Rod | 1 |
| 16***75 | Lever | 1 |
| 17***66 | Film-Notice; (Winch Operation)(Winch Operation) | 1 |
220-0475 Control Gp-Winch
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***04 | Suppressor As-Arc | 3 |
178-9348 Control Gp-Winch
| 12***42 | Rod | 1 |
| 16***72 | Plate As | 1 |
| 16***75 | Tube As | 1 |
187-5392 Control Gp-Winch Hydraulic
| 10***83 | Plug; (Hex Socket) (1/4 Npt) (Early) (Current Brake Housing May Be Visually Distinguished From The Early Design By Locating The -6 Orb Plug At The "B" Brake Pressure Port) (The Early Design Used A Socket Head, 1/4 Npt Plug) | 1 |
| 11***49 | Fitting As; (Quick Disconnect) | 1 |
| 11***32 | Coupler As | 2 |
219-7249 Control Gp-Winch Hydraulic
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 3 |
| 11***49 | Fitting As; (Quick Disconnect) | 1 |
| 11***32 | Coupler As | 2 |
172-0314 Control Gp-Winch Hydraulic
| 10***83 | Plug; (Hex Socket) (1/4 Npt) (Early) (Current Brake Housing May Be Visually Distinguished From The Early Design By Locating The -6 Orb Plug At The "B" Brake Pressure Port) (The Early Design Used A Socket Head, 1/4 Npt Plug) | 1 |
| 13***07 | Plug | 1 |
| 15***30 | Quick Disconnect, Gauge Port; (Gauge Port) | 2 |
269-8912 Control Gp-Winch Lockout -Freespool
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***59 | Actuator-Rocker | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
162-6503 Cover Gp-Grapple Valve
| 16***03 | Cover Group-Grapple Valve | 1 |
| 16***89 | Cover-Front | 1 |
| 16***97 | Cover As | 1 |
151-0805 Crosshead Gp-Grapple
| 14***22 | Pin; (Swivel Lock) | 2 |
| 15***05 | Crosshead Group-Grapple | 1 |
| 16***92 | Link | 1 |
208-5054 Crosshead Gp-Grapple
| 14***22 | Pin; (Swivel Lock) | 2 |
| 16***95 | Spring As | 4 |
| 16***96 | Spacer | 2 |
209-1417 Crosshead Gp-Grapple -(Kit)
| 16***95 | Spring As | 4 |
| 16***97 | Pin-Swivel | 2 |
| 20***97 | Link As | 1 |
143-2064 Drive Gp-Winch
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 1 |
| 11***01 | Yoke-Shaft | 1 |
| 14***64 | Drive Group-Winch | 1 |
179-7064 Drum Gp-Winch
| 06***06 | Pin-Dowel | 2 |
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
162-0117 Drum Gp-Winch
| 00***65 | Lockwasher | 1 |
| 06***06 | Pin-Dowel | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
160-1577 Edge Gp-Cutting
| 16***77 | Edge Group-Cutting | 1 |
| 2J***06 | Nut Front Support To Frame; Nut-Front Support To Frame | 21 |
| 5J***73 | Bolt 2.06cm(.8125in.)Long | 21 |
174-4987 Fairlead Gp-Winch -Dual Function Frame
| 12***95 | Pin; (Locking) | 2 |
| 14***20 | Plate | 1 |
| 14***21 | Plate | 1 |
148-4403 Fairlead Gp-Winch -Dual Function Frame
| 12***95 | Pin; (Locking) | 2 |
| 14***20 | Plate | 1 |
| 14***21 | Plate | 1 |
161-6642 Fairlead Gp-Winch -Cable Machine
| 16***21 | Shaft | 1 |
| 16***42 | Fairlead Group-Winch; -Cable Machine | 1 |
| 1V***83 | Spacer | 4 |
225-3712 Fairlead Gp-Winch -Dual Function Frame
| 12***95 | Pin; (Locking) | 3 |
| 14***21 | Plate | 1 |
| 14***22 | Roller As | 3 |
248-6990 Fairlead Gp-Winch -Dual Function Frame
| 24***74 | Pin | 3 |
| 24***76 | Roller | 3 |
| 24***90 | Fairlead Group-Winch; -Dual Function Frame | 1 |
184-1155 Frame Gp-Fairlead -Cable Machine
| 12***49 | Pin As | 2 |
| 12***51 | Pin As | 4 |
| 15***51 | Frame As | 1 |
155-0546 Frame Gp-Fairlead -Cable Machine
| 12***49 | Pin As | 2 |
| 12***51 | Pin As | 4 |
| 15***46 | Frame Group-Fairlead; -Cable Machine | 1 |
143-2085 Frame Gp-Grapple -Dual Function
| 12***92 | Pin | 8 |
| 12***93 | Pin | 2 |
| 12***94 | Pin | 10 |
224-3309 Frame Gp-Grapple -Dual Function
| 14***27 | Connector Group | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***66 | Elbow Group | 2 |
256-1146 Frame Gp-Grapple -Dual Function
| 13***68 | Washer; (60x120x1.6-mm Thk)(1.6mm Thk) | 2 |
| 13***69 | Washer; (60x120x3.1-mm Thk)(3.1mm Thk) | 2 |
| 14***27 | Connector Group | 2 |
162-0119 Gear Gp-Winch Input -Pinion
| 03***82 | Seal-O-Ring; (47.3mm Id) | 1 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 6 |
161-6406 Gear Gp-Winch Output
| 11***16 | Retaining Ring | 1 |
| 12***10 | Spacer; (2x2.75x0.125-In Thk)(3.18mm Thk) | 2 |
| 12***01 | Seal-O-Ring | 1 |
224-3303 Grapple Ar -Dual Function, 360 Degree Rotation
| 16***60 | Control Group-Pilot Operated Hydraulic; -Dual Function Grapple | 1 |
| 16***12 | Bearing & Seal Group-Grapple; -Dual Function | 1 |
| 20***95 | Cylinder Group-Boom | 2 |
143-2048 Grapple Ar -Dual Function
| 14***48 | Grapple Ar; -Dual Function | 1 |
| 14***85 | Frame Group-Grapple; -Dual Function | 1 |
| 14***87 | Lines Group-Grapple | 1 |
194-6164 Grapple Ar-Bunching -Dual Function
| 15***05 | Crosshead Group-Grapple | 1 |
| 19***52 | Head Group-Grapple; -Bunching | 1 |
| 19***64 | Grapple Ar-Bunching; -Dual Function | 1 |
151-0872 Grapple Ar-Bunching -Dual Function
| 15***04 | Head Group-Grapple; -Bunching | 1 |
| 15***05 | Crosshead Group-Grapple | 1 |
| 15***72 | Grapple Ar-Bunching; -Dual Function | 1 |
159-2821 Guard Gp-Winch
| 15***21 | Guard Group-Winch | 1 |
| 16***46 | Sheet As | 1 |
| 16***47 | Door As | 1 |
194-2252 Head Gp-Grapple -Bunching
| 11***30 | Hose As | 1 |
| 12***86 | Screw-Cap, Nut | 1 |
| 12***89 | Plate-Lock | 1 |
214-7623 Head Gp-Grapple -Thinning
| 14***22 | Pin; (Swivel Lock) | 2 |
| 14***28 | Connector Assem. | 2 |
| 14***45 | Connector As | 2 |
204-5892 Head Gp-Grapple -Bunching
| 11***30 | Hose As | 1 |
| 12***86 | Screw-Cap, Nut | 1 |
| 12***89 | Plate-Lock | 1 |
151-0804 Head Gp-Grapple -Bunching
| 10***14 | Hose As | 1 |
| 12***86 | Screw-Cap, Nut | 1 |
| 12***89 | Plate-Lock | 1 |
224-3313 Head Gp-Grapple -Bunching
| 03***17 | Pin, . Spring | 2 |
| 17***15 | Spacer; (13.3x22.23x10.5-mm Thk) | 2 |
| 20***99 | Head-Grapple | 1 |
267-8560 Kit-Valve
| 03***26 | Retainer | 1 |
| 10***41 | Clip; (Slot) | 1 |
| 12***10 | Cable As | 1 |
253-6089 Kit-Valve -Winch
| 25***89 | Kit-Valve; -Winch | 1 |
159-2825 Lines Gp-Winch
| 14***78 | Filter Group-Oil; -Axle Oil Cooler | 1 |
| 14***27 | Connector Group | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
166-3545 Lines Gp-Winch
| 03***62 | Elbow, Swivel Nut 45 Degrees (-6) | 1 |
| 16***45 | Lines Group-Winch | 1 |
| 2P***78 | Union- Tube Assembly To Upper Frame | 2 |
143-2074 Mounting Gp-Winch
| 10***53 | Bolt; (M30x3.5x150-mm) | 2 |
| 14***74 | Mounting Group-Winch | 1 |
| 16***50 | Plate As | 1 |
225-8031 Pin Gp-Grapple
| 20***94 | Guard | 2 |
| 22***62 | Pin As | 8 |
| 22***64 | Plate | 1 |
143-2072 Pump & Mtg Gp-Winch
| 10***51 | Coupling-Shaft | 1 |
| 14***72 | Pump & Mtg Group-Winch | 1 |
| 20***93 | Pump Group-Gear | 1 |
161-6641 Roller Gp-Top
| 16***41 | Roller Group-Top | 1 |
| 1V***83 | Spacer | 2 |
| 1V***87 | Shaft Assem. | 1 |
225-9457 Rotator Gp-Hydraulic
| 15***38 | Locknut | 1 |
| 15***57 | Motor-Shaft | 1 |
| 15***59 | Spring | 27 |
225-2417 Snubber Gp-Grapple
| 09***30 | Ring-Retaining; (External) | 4 |
| 20***53 | Pin As | 2 |
| 20***55 | Cap | 2 |
226-2397 Tong Gp-Grapple
| 22***97 | Tong Group-Grapple | 1 |
| 23***79 | Bushing | 2 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
226-2396 Tong Gp-Grapple
| 22***96 | Tong Group-Grapple | 1 |
| 23***79 | Bushing | 2 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
204-5893 Tong Gp-Grapple
| 19***93 | Bushing | 2 |
| 20***93 | Tong Group-Grapple | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
220-0480 Winch Ar
| 14***64 | Drive Group-Winch | 1 |
| 14***72 | Pump & Mtg Group-Winch | 1 |
| 14***74 | Mounting Group-Winch | 1 |
143-2062 Winch Ar-Skidder
| 14***62 | Winch Ar-Skidder | 1 |
| 14***64 | Drive Group-Winch | 1 |
| 14***72 | Pump & Mtg Group-Winch | 1 |
169-3496 Winch Ar-Skidder
| 14***64 | Drive Group-Winch | 1 |
| 14***72 | Pump & Mtg Group-Winch | 1 |
| 14***74 | Mounting Group-Winch | 1 |
159-0046 Winch Gp
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 3 |
| 11***73 | Ferrule - 3/4 In. (19 mm) Wire Rope | 1 |
| 15***46 | Winch Group | 1 |
220-0483 Winch Gp
| 11***73 | Ferrule - 3/4 In. (19 mm) Wire Rope | 1 |
| 16***05 | Clutch & Gear Group-Winch | 1 |
| 16***06 | Gear Group-Winch Output | 1 |
545 serial number reference
The PIN/serial plate on this generation of Cat wheel skidder is typically mounted on the main frame; exact placement can vary by unit and configuration, so if the plate is missing check the frame for a stamped serial as a backup. Read the letters at the start of the serial as the prefix, which identifies the model and production run, and the digits that follow as the sequential unit number within that run. If the plate is illegible or missing, confirm the prefix and unit number with a Cat dealer before ordering parts.
| Prefix | Identifies | Notes |
|---|---|---|
| 2FZ | 545 Wheel Skidder (base series, no letter suffix) | Only confirmed serial prefix for the plain 545 wheel-type skidder. Powered by the Cat 3306 DITA six-cylinder turbocharged, aftercooled diesel, about 168 kW (225 hp) gross and 149 kW (200 hp) net at 2200 rpm, roughly 10.5 L (638 cu in) displacement. Paired with a 5-speed-forward/3-speed-reverse countershaft powershift transmission and a lock-up torque converter that shifts the machine into direct drive under favorable load and speed conditions for faster travel. Offered with a dual-function arch (extra reach and fore-aft movement for grapple work) or a cable arch with an integrated winch, drum diameter about 279 mm (11 in). The electrical schematic covering this prefix documents a wiring running change partway through the run, around unit 2FZ433-2FZ438, which is a running change and not a separate model. The same document family also covers the sibling 525B (prefix 3KZ) and 535B (prefix AAE) wheel skidders built on the same platform generation - those are different models and use different prefixes, not this one. |
Frequently asked questions
What engine does the Caterpillar 545 skidder use?
The Caterpillar 545 wheel-type skidder runs the Cat 3306 DITA, a 10.5 L turbocharged and aftercooled mechanical inline-six diesel rated 168 kW (225 hp) gross and 149 kW (200 hp) net. It is a fully mechanical engine with no electronic controls, paired with a 5-speed forward/3-speed reverse countershaft powershift transmission.
What is the operating weight of the Caterpillar 545 skidder?
Operating weight runs roughly 39,900 to 40,200 lb (about 18,100-18,200 kg), varying with cable-arch versus grapple configuration. Some factory spec sheets for fully equipped units with an enclosed ROPS cab, winch, and larger tires list weights up toward 44,600 lb (20,230 kg).
What replaced the Caterpillar 545 skidder?
The Caterpillar 545 was replaced by the 545C, which switched to the electronically controlled Cat C7 ACERT diesel to meet Tier 3 emissions standards. The 545C was later followed by the 545D, built on the Cat C7.1 ACERT engine.
What 545 owners discuss
How many hours does the 3306 DITA in a 545 typically run before a rebuild?
Owners running these in pole and log-length skidding report the 3306 DITA going well past 10,000 to 15,000 hours with routine service. Long-time operators describe fleets of high-hour 545s still working daily, with only isolated reports of a full engine loss around 14,000 hours, usually traced to neglected cooling or oil service rather than a design flaw. Budget for an inframe or full overhaul around 15,000 to 18,000 hours, though a well-serviced engine regularly runs past that. Hour count alone tells less than maintenance history. A low-hour machine run hard on poor fuel or skipped oil changes can need work sooner than a high-hour machine that was cared for.
What quirks show up on the mechanical 3306 DITA fuel system in these skidders?
This engine runs a mechanical inline injection pump with a hydraulic, oil-pressure-driven servo governor, and most complaints trace back there rather than to electronics. A cracked or perforated diaphragm in the fuel ratio control module bleeds boost signal and shows up as flat power under load. Governor wear or a sticking throttle linkage produces a hunting, surging idle. Because the governor servo runs on engine oil pressure, a worn servo seal can let fuel migrate into the crankcase, so check oil level and smell for fuel if power feels soft. White smoke on a cold start is normal on this engine and should clear once warm. Smoke that lingers points to worn injectors or a blocked water-to-air aftercooler core, usually mineral scale from the coolant.
What winch complaints come up most often on the 545?
The high-capacity winch runs its own oil pump off the winch sump, separate from the main hydraulic system. Most reported faults are variations on the drum not reeling in, not reeling out, or not holding with the brake released. Low winch oil pressure traces to control valves out of adjustment, a plugged filter, a relief valve set low, or a worn pump cover. Growling or constant noise in the winch case usually means low or wrong-type lube, worn bearings, or ring-and-pinion wear or misalignment. Winch brake and drum control affect rigging safety directly. Have your dealer verify winch brake holding capacity and relief valve settings before returning the machine to full working loads.
Is loss of steering assist a known issue?
Steering runs off its own hydraulic circuit. Low fluid level or a failing pump is the first thing experienced techs check when steering goes soft or heavy. Low reservoir level, a worn steering pump, and leaking hoses or fittings are the usual suspects. On these earlier machines, steering runs on full priority through an older valving arrangement and can feel heavier under load than later D-series machines built with revised priority valving. Any steering complaint on an articulated machine this size is safety-relevant. Have your dealer verify pump output and relief pressure rather than just topping off fluid.
What wear points show up on the articulation joint and tires?
The hitch uses a wide pin spread and a large double-tapered roller bearing at the lower hitch to cut down on horizontal loading and flexing at the center section. Even so, hinge pins and bearings are a known wear item on high-hour machines, and play here is one of the first things a buyer's inspection should catch. On tires, the hydraulically engaged, on-the-go differential locks are meant to run disengaged in normal travel and only locked in when conditions call for it. Running locked all the time is what drives premature tire scrubbing and shortened tire life, not a defect in the lock system itself.
What electrical gremlins turn up on these machines?
The 545 predates modern engine electronics, so most reported electrical complaints are wiring problems rather than sensor or ECM faults: bad grounds, corroded connectors, and worn harness runs through the steering column and dash. Gauges that read wrong or a dash alarm that won't clear are traced more often to a broken sender wire or a bad ground than to the sender or switch itself. Check connectors for corrosion and confirm grounds before replacing a sender or switch.
What should a buyer check on a used 545?
Start at the articulation joint. Check for play in the hitch pins and bearings, since rebuilding that joint along with the center pins and bushings is a common line item on higher-hour machines coming up for sale. Run the winch through in and out and brake-hold under load if possible, and watch for slow or noisy operation. Check the transmission for slipping or delayed engagement in each gear; units advertised with a rebuilt transmission are common in the higher-hour range, which tells you where that component typically needs attention. Look at tire wear pattern for scrubbing that suggests the differential locks were run engaged too often. Inspect the engine for fuel smell in the oil, lingering white or grey smoke once warm, and coolant condition, since aftercooler scale is a common finding on neglected units. Pull maintenance records if available. On a machine this age, service history says more than the hour meter.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 545 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.