Caterpillarforest productstrack feller buncher
Caterpillar 532
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 532 is a purpose-built, zero-tail-swing (ZTS) track carrier in Cat's 500-series forestry line, sold as a track feller buncher (saw or shear felling head) and as a track harvester carrier (processing head) on the same base machine. It runs a Cat C9 ACERT diesel meeting Tier 2 emissions, rated around 284 hp (212 kW) gross and roughly 263 hp (196 kW) net. Operating weight without an attachment runs about 69,300-69,700 lb (31,400-31,600 kg), varying with track gauge and configuration. Caterpillar introduced the 511/521/522/532 ZTS lineup in the mid-2000s as purpose-built forestry carriers, following an earlier era when Cat forestry work relied on excavator-based carriers fitted with felling or processing heads. The 532 sits at the top of the tilting ZTS pair alongside the 522, offering a wider track gauge, longer reach and a patented three-cylinder tilt frame giving roughly 20 degrees of forward tilt and 11 degrees of side-to-side leveling for steep-ground stability.
Within the 500 series, the 511 and 521 are fixed, non-leveling carriers with welded track guards, while the 522 and 532 add the bolted track-frame-to-carbody tilt system with bolt-on guards and adjustable gauge width for slope work. The 532 offered the largest reach and lift capacity in the tilting pair, with the felling-buncher boom reaching further than the harvester-boom configuration but carrying less bare-pin capacity in harvester trim. Emissions certification moved from Tier 2 at launch toward Tier 3-compliant late-production units before Cat's product line evolved into the later B-series ZTS carriers; Cat's own product records list the 532 as non-current by the early 2010s. In the used and parts market today the 532 remains relevant because the C9 ACERT shares architecture and wear parts with a broad range of Cat construction and agricultural equipment, keeping engine parts supply strong even after the carrier itself left the lineup. Forestry-specific wear items — felling-head pivots, saw/shear drive components, tilt cylinders and undercarriage — see heavy demand, and buyers sourcing parts should confirm buncher-vs-harvester configuration and track gauge before ordering, since both vary across the production run.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 532 specifications
Engine
| Engine model | Cat C9 ACERT, U.S. EPA Tier II certified. Shared engine across the 521/522/532 track feller buncher and track harvester family. |
| Gross power | 284 hp (211.8 kW) at 1800 rpm, per the factory forestry-line literature for this platform. One spec aggregator lists power measured at 2100 rpm instead — treat 1800 rpm as the factory rating; figure varies by source. |
| Net power | 263 hp (196 kW), consistent across published spec sheets. |
| Displacement | 8.8 L (537 cu in). |
| Cylinders | Not explicitly stated on available spec sheets for this model. |
| Emissions tier | U.S. EPA Tier II. Factory literature notes about 5% better fuel efficiency versus the engine it replaced. |
Weights
| Operating weight, track feller buncher configuration (w/o felling head) | 31,620 kg (69,710 lb). |
| Operating weight, track harvester configuration (w/o harvester head) | 31,450 kg (69,340 lb). One spec sheet rounds this to 69,335 lb. |
| Shipping weight | Not separately published; operating weight w/o head is the figure carried on spec sheets. |
| Ground pressure | Not published in available spec sheets for this model. |
Dimensions
| Overall length, without attachment | 8.61 m (28.26 ft / 339 in). |
| Shipping length, with attachment installed | 10.92 m (35.83 ft / 430 in). |
| Overall width | 3.2 m (10.5 ft), over standard undercarriage. |
| Height to top of cab | 3.96 m (13 ft). |
| Ground clearance | 0.89 m (2.92 ft / 35 in). |
| Track length on ground | 4.89 m (16.05 ft / 192.6 in). |
| Track gauge | 2.59 m (8.51 ft). |
| Track shoe width | 610 mm (24.02 in). |
| Track pitch | 216 mm (8.5 in). |
| Undercarriage class | 330 HEX-class undercarriage, shared with the 521/522 ZTS platform. |
Performance
| Maximum reach, track feller buncher head | 8.1 m (26.6 ft). |
| Maximum reach, track harvester head | 9.8 m (32 ft), rounded to 32.16 ft on one spec sheet. |
| Bare-pin lift capacity, feller buncher | 7,100 kg (15,600 lb) at 6.1 m (20 ft) reach. |
| Bare-pin lift capacity, harvester | 4,100 kg (9,100 lb) at maximum reach. |
| Tractive effort | 38,555 kg (85,000 lb) from the travel motors. |
| Felling head cut capacity (attachment-dependent) | 560-610 mm (22-24 in), varies with felling head selected. |
| Travel speed | Not published in available spec sheets for this model. |
| Gradeability | Not published in available spec sheets for this model. |
Service capacities (summary)
| Fuel tank | 530 L (140 gal). |
| Hydraulic system | 300 L (79.3 gal). System runs three dedicated variable-displacement pumps: about 200 cc for the travel circuit, about 190 cc for boom and implement functions, and about 55 cc for felling/processing attachment functions. |
| Engine oil | 39 L (10.3 gal). |
| Cooling system | 61 L (16.1 gal). |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
532 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 39 L (10.3 US gal) | Cat DEO diesel engine oil. Use Cat DEO SAE 10W-30 for ambient range -18C to 40C (0F to 104F); switch to Cat DEO SAE 15W-40 for -9.5C to 50C (15F to 122F). Cat DEO-ULS accepted where a low-ash spec is required. |
| Cooling system | 61 L (16.1 US gal) | Cat ELC (Extended Life Coolant), factory premix concentration. Do not mix with conventional green coolant; follow the Cat ELC extender service interval, not a conventional coolant interval. |
| Fuel tank (standard) | 530 L (140 US gal) | Clean, filtered diesel fuel meeting Cat's diesel fuel specification. No lubricant brand applies. |
| Fuel tank (optional auxiliary/pony tank) | 341 L (90 US gal) | Same diesel fuel spec as the main tank; this is a range-extending option, not a separate fluid type. |
| Hydraulic tank | 262 L (69.2 US gal) | Cat HYDO Advanced 10 hydraulic oil (Cat HYDO Advanced 30 in hot/tropical climates). Acceptable alternates: Cat TDTO, Cat DEO, Cat MTO, or a commercial heavy-duty diesel engine oil with minimum 900 ppm zinc. Cat Bio HYDO (HEES) available where biodegradable fluid is required. |
| Hydraulic system, total (tank + lines + cylinders + coolers) | 300 L (79.3 US gal) | Same Cat HYDO Advanced fluid used for the tank fill; figure is total system volume, not an added separate fill. |
| Swing drive | 9.8 L (2.6 US gal) | Cat TDTO (Transmission/Drive Train Oil), meets/exceeds Cat TO-4 spec. Offered in SAE 10W, 30, and 50 - select grade by ambient temperature. |
| Track (final) drives, each | Not separately published in available spec data - verify against the OMM or a Cat dealer | This platform's drivetrain compartments (swing drive, final drives) run Cat TDTO by Cat convention; confirm exact grade for the track drive compartments with the OMM or dealer. |
| Grease (spec only) | N/A - service point, not a reservoir | Cat Advanced 3Moly Grease (NLGI 2, service range -20C to 40C / -4F to 104F) for general chassis and pin lubrication points. Cat Extreme Application (XA) Grease specified for high-load felling head and boom pin joints under heavy forestry duty cycles. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 532 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the 532 beyond the schedule
Predictive Maintenance & Fluid Analysis
Run S·O·S sampling on the C9 ACERT's extended 500-hour oil interval to catch fuel dilution or coolant intrusion before the extended change point causes damage. Sample hydraulic oil at 250-hour intervals given the three-pump travel/boom/felling circuit's duty cycle, and watch for elevated silicon from sawdust and bark ingestion at the tank breather. Track final drive and swing gear oil trends separately — steep-slope shock loading on this carrier accelerates wear faster than flat-ground duty cycles.
Corrective & Common Repairs
Radiator and charge-air core plugging from bark dust and slash is the most frequent corrective call on the 532 — power-wash or replace cores before overheating damages the C9 ACERT. Tilt cylinder rod seal leaks show up early from constant leveling cycles on side slopes. Swing bearing and gear wear develops from sustained load-swing torque used to carry bunched trees uphill. Track chain, sprocket and roller wear runs faster here than on construction machines due to rock and stump contact in forest floor conditions.
Overhaul & Rebuild Points
Plan travel motor and final drive rebuilds around end-play and gear-oil metal trends rather than a fixed hour number on this carrier. Swing motor and swing bearing overhaul follows backlash and bolt-stretch findings from periodic torque checks. Tilt cylinders need reseal or rod-bushing replacement as leveling cycles accumulate. At high hours, plan C9 ACERT top-end work — injectors and turbocharger — alongside felling-head main bearing and wrist-pin rebuilds, since both wear paths track with total working hours on steep or debris-heavy ground.
Seasonal & Environment Servicing
Cold-climate starts need C9 ACERT block-heater use and a winter-grade fuel treated for gelling before hard freezes. Adjust track tension for frozen versus thawed, muddy ground — over-tight tracks in freeze-thaw cycles accelerate pin and bushing wear. Radiator and screen cleaning frequency should increase during dry-season slash and dust conditions. Switch hydraulic fluid viscosity grade for large seasonal temperature swings, and apply corrosion protection to cylinder rods and exposed linkage on machines parked between logging seasons.
532 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 179-9348 | Valve-Drain | Fuel system service | Check fitment → |
| 1R-0762 | Filter As-Fuel | Fuel system service | Check fitment → |
| 220-8678 | Seal-Ring | Fuel system service | Check fitment → |
| 326-1644 | Filter As-Water Sep & Fuel | Fuel system service | Check fitment → |
| 142-1339 | Filter Element As-Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
532 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| CID 0100-03 (SPN 100/FMI 3) | Engine oil pressure sensor circuit reading above the normal voltage range. | Sensor signal wire shorted to battery voltage, corroded connector, or a failed oil pressure sensor. | Check sensor wiring and connector for a short to power; confirm actual oil pressure with a mechanical gauge before replacing the sensor. |
| CID 0100-04 (SPN 100/FMI 4) | Engine oil pressure sensor circuit reading below the normal voltage range. | Sensor signal wire shorted to ground, corroded connector, or a failed sensor. | Inspect wiring and connector for a short to ground; verify actual oil pressure with a mechanical gauge before condemning the sensor. |
| Event Code E360 | Low engine oil pressure event — warning, power derate, or engine shutdown depending on how far below threshold the reading falls. | Low oil level, worn oil pump, plugged filter, or a genuine sensor/wiring fault triggering a false reading. | Stop and check oil level and filter condition immediately; if oil and filter are fine, check the oil pressure sensor circuit. |
| CID 0110-03/04 | Engine coolant temperature sensor circuit voltage out of the normal range (open or shorted circuit). | Damaged sensor wiring, corroded connector, or a failed coolant temperature sensor. | Inspect the connector and harness for damage or corrosion; check sensor resistance against spec before replacing it. |
| Event Code E361 | High engine coolant temperature event — warning, derate, or shutdown depending on how far above threshold the reading rises. | Low coolant, a clogged radiator or debris screen, a weak water pump, or a failed thermostat. | Shut down safely, check coolant level, and inspect the radiator core for packed debris before restarting. |
| Event Code E2143 | Engine coolant level below the normal monitored minimum. | External coolant leak at a hose or fitting, or a failed coolant level sensor/switch. | Check for visible leaks at hoses, radiator, and water pump; top off coolant and watch for recurrence. |
| CID 0172-03/04 | Intake manifold (boost) air temperature sensor circuit voltage out of the normal range. | Damaged sensor wiring or connector near the turbo/intake manifold, or a failed air temperature sensor. | Inspect harness routing near the turbo and intake manifold for chafing or heat damage; test the sensor against spec. |
| CID 0190-08 | Engine speed/timing sensor signal frequency outside the expected range. | Incorrect sensor air gap, a damaged sensor, or a chipped timing/tone-ring tooth. | Check sensor mounting and air gap with a feeler gauge before replacing the sensor. |
| CID 0041-04 | 8-volt sensor supply circuit reading below the normal voltage range, which can drop out multiple sensors at once. | A shorted or grounded sensor sharing the 8V supply pulling the whole circuit down. | Disconnect sensors on the shared 8V supply one at a time to isolate the short, then repair or replace the faulty component. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
532 attachments & work tools
Machine class / family
The 532 is a zero-tail-swing (ZTS) track feller buncher, offered also in a track harvester front-end configuration. It shares its platform and pump architecture with the 511/521/522 track feller buncher family and runs a Cat C9 ACERT engine rated Tier II.
Felling head (disc saw)
Standard felling front is a continuous-spin disc saw head in a box-section, reinforced frame, built in partial-lateral-tilt or full-lateral-tilt versions. Class-typical max cut diameter runs about 560-620 mm (22-24 in), varies by head size selected.
Hot saw / intermittent saw front
An intermittent (hot) saw felling front is offered as an alternative to the continuous disc saw for this size class, aimed at higher-value or larger-diameter stems where shatter control matters.
Harvester conversion heads
When configured as a track harvester, the machine accepts a dangle-style harvester head or an intermittent saw processing head. Optional hydraulic kits enable these harvesting/processing functions on the ZTS platform.
Hydraulic arrangement
Three dedicated variable-displacement pumps feed the machine: one for the travel circuit (roughly 200 cc), one for boom/implement functions (roughly 190 cc), and one dedicated to the felling/processing attachment circuit (roughly 55 cc). Harvester/hot-saw fronts draw on this dedicated attachment circuit rather than sharing boom flow.
Head mounting / tilt system
Felling and harvester heads pin-mount to a hydraulic tilt frame at the end of the boom/stick (partial or full lateral tilt), not a quick-coupler pin-grabber system as used on excavator buckets. Tilt lets the head stay plumb to the stem on side-slope cutting.
Undercarriage / gauge width
Track frame bolts to the carbody and can be set to standard or wide gauge for added stability on steep-slope work; wide-gauge spread is roughly 2.6-2.9 m (102-113 in) across the class. Multiple track pad widths are offered, including tri-track shoe options for flotation on soft ground.
Guarding package
Cab meets FOPS/ROPS/OPS guarding requirements for felling-head debris and rollover protection. Factory guarding also covers track rollers, undercarriage/belly pan, and a heavy-duty radiator guard door; bolt-on track guards are used on this leveling-carbody class.
Lift capacity / reach (class reference)
As a feller buncher, bare-pin lift capacity is about 7100 kg (15,600 lb) at 6.1 m (20 ft) reach, with max reach around 8.1 m (26.6 ft). Configured as a track harvester, bare-pin lift is about 4100 kg (9100 lb) and max reach figures given range 9.0-9.8 m (29.5-32 ft), varies by configuration/source.
All 532 assemblies by section
Every catalogued assembly group for the Caterpillar 532. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
210-9245 Air Cleaner Gp
| 14***39 | Filter Element As-Air; (Primary) | 1 |
| 14***04 | Filter Element As-Air; (Secondary) | 1 |
| 17***92 | Cover As | 1 |
216-9856 Air Cleaner Gp
| 09***35 | Spacer; (11x25x20-mm Thk) | 3 |
| 18***03 | Hose-Elbow | 1 |
| 18***30 | Hose-Elbow | 1 |
173-6107 Elbow Gp-Air Inlet
| 13***53 | Stud; (M8x1.25x82.75-mm)(M8x1.25x82.75-mm) | 8 |
| 17***07 | Elbow Group-Air Inlet | 1 |
| 18***71 | Elbow-Air Inlet | 1 |
8n-2694 Indicator Gp-Air Filter Change
| 8N***94 | Indicator-Air Filter Change; (Air Cleaner) | 1 |
328-9980 Lines Gp-Air
| 17***81 | Hose | 1 |
| 1P***79 | Flange (Half) | 8 |
| 20***41 | Hose | 2 |
202-0996 Manifold Gp-Exhaust
| 11***15 | Stud-Taperlock; (M10x85-mm Oal) | 12 |
| 16***11 | Gasket | 6 |
| 19***97 | Manifold-Exhaust | 1 |
216-9857 Muffler Gp
| 09***35 | Spacer; (11x25x20-mm Thk) | 3 |
| 13***81 | Clamp As | 1 |
| 20***80 | Muffler As | 1 |
258-8337 Turbocharger Gp
| 1P***51 | Gasket; (Turbocharger) | 1 |
| 25***00 | Turbocharger Group | 1 |
| 25***37 | Turbocharger Group | 1 |
250-7700 Turbocharger Gp
| 13***02 | Clamp As; (Turbine)(Turbine) | 1 |
| 16***63 | Clamp | 2 |
| 19***10 | Cover-Compressor | 1 |
Basic Engine
224-7846 Belt Tensioner Gp
| 18***49 | Support | 1 |
| 19***43 | Belt Tensioner | 1 |
| 22***46 | Belt Tensioner Group | 1 |
242-0674 Camshaft Gp
| 10***94 | Plate-Thrust | 1 |
| 1B***05 | Key; (Woodruff) | 1 |
| 22***47 | Gear; (100-Teeth) | 1 |
202-3301 Cover Gp-Cylinder Block -Crankcase
| 20***01 | Cover Group-Cylinder Block; -Crankcase | 1 |
| 21***10 | Gasket | 1 |
| 21***11 | Cover; (Cylinder Block) | 1 |
133-3089 Cover Gp-Flywheel Housing
| 0S***89 | Bolt, Hex. Hd., 5/8"-11 N.C. X 1 3/4" | 3 |
| 13***89 | Cover Group-Flywheel Housing | 1 |
| 4D***04 | Washer,Flat Cover Mtg,Accessory Drive | 3 |
211-3285 Cover Gp-Front Housing
| 06***55 | Seal-O-Ring (Id=47.22mm) | 1 |
| 12***57 | Washer; (10.85x19.3x1.27-mm Thk) | 2 |
| 13***22 | Stud | 2 |
118-1727 Cover Gp-Front Housing -Accessory Drive
| 11***27 | Cover Group-Front Housing; -Accessory Drive | 1 |
| 13***19 | Seal-Integral; (Integral) | 1 |
| 4W***26 | Cover | 1 |
258-8724 Cover Gp-Valve Mechanism
| 21***06 | Cover Group-Valve Mechanism | 1 |
| 21***01 | Seal-Bulk; (23-Dm)(Valve Mechanism Cover) | 0 |
| 22***31 | Cap As-Filler; (Engine Oil) | 1 |
280-8003 Cover Gp-Valve Mechanism
| 22***31 | Cap As-Filler; (Engine Oil) | 1 |
| 26***27 | Cover Group-Valve Mechanism | 1 |
| 26***90 | Seal-Valve Cover; (Valve Mechanism Base) | 1 |
164-6148 Crankshaft Gp
| 15***39 | Bearing-Main; (Standard) | 7 |
| 16***48 | Crankshaft Group | 1 |
| 1B***05 | Key; (Woodruff) | 1 |
325-3915 Cylinder Block As
| 0L***26 | Plug -13mm(.512 In.) Outside Dia. | 2 |
| 17***54 | Bolt-Hex Head; (M16x160mm) | 14 |
| 20***05 | Bearing-Sleeve; (Camshaft) | 2 |
220-1952 Cylinder Block Gp
| 16***24 | Seal-Liner | 6 |
| 19***62 | Liner-Cylinder Block | 6 |
| 22***52 | Cylinder Block Group | 1 |
220-1951 Cylinder Block Gp
| 03***53 | Seal-O-Ring; (08.92mm Id) | 1 |
| 0S***19 | Plug-Cup | 1 |
| 18***09 | Plug As; (High Temperature) | 1 |
332-3619 Cylinder Head As
| 21***17 | Insert-Valve Seat; (Exhaust)(Standard) | 12 |
| 22***00 | Sleeve-Injector | 6 |
| 24***88 | Insert-Valve Seat; (Inlet)(Standard) | 12 |
242-0672 Cylinder Head Gp
| 18***15 | Gasket Assem. | 1 |
| 24***72 | Cylinder Head Group | 1 |
| 25***39 | Cylinder Head Group | 1 |
252-8439 Cylinder Head Gp
| 14***95 | Plug As | 2 |
| 16***78 | Seal-Valve Stem; (Exhaust) | 12 |
| 19***15 | Spring-Valve; (Inner) | 12 |
165-4557 Damper & Pulley Gp
| 15***36 | Pulley-Crankshaft; (8-Groove) | 1 |
| 16***57 | Damper & Pulley Group | 1 |
| 16***21 | Damper Assem. | 1 |
231-6686 Drive Gp-Fan
| 21***23 | Bracket As | 1 |
| 23***86 | Drive Group-Fan | 1 |
| 4W***03 | Cup-Roller Bearing | 2 |
167-0171 Fastener Gp-Cylinder Head
| 16***71 | Fastener Group-Cylinder Head | 1 |
| 18***63 | Bolt; (M16x2x180-mm) | 1 |
| 9X***68 | Washer; (17.5x30x3.5-mm Thk) | 1 |
213-4363 Fastener Gp-Cylinder Head
| 21***63 | Fastener Group-Cylinder Head | 1 |
| 26***15 | Bolt-12 Point Head; (M16x2x180-mm) | 1 |
| 29***84 | Fastener Group-Cylinder Head | 26 |
218-0859 Fastener Gp-Damper & Pulley
| 21***59 | Fastener Group-Damper & Pulley | 1 |
| 22***21 | Spacer; (101.5x167x8-mm Thk) | 1 |
| 6V***49 | Bolt; (M10x1.5x50-mm) | 8 |
117-2794 Fastener Gp-Flywheel
| 11***94 | Fastener Group-Flywheel; (Flywheel) | 1 |
| 5P***47 | Washer (Bracket To Valve Support) | 8 |
| 9X***21 | Bolt; (Locking) (M16x2.0x45mm) | 8 |
236-7315 Fastener Gp-Valve Cover
| 09***49 | Bolt; (M8x1.25x40-mm) | 11 |
| 23***15 | Fastener Group-Valve Cover | 1 |
| 8T***24 | Washer-To Assemble Valve As And Plates | 11 |
258-8728 Fastener Gp-Valve Cover
| 24***00 | Spring | 9 |
| 25***28 | Fastener Group-Valve Cover | 1 |
| 8T***00 | Bolt (M8x1.25x60mm); (M8x1.25x60-mm) | 9 |
233-0423 Fastener Gp-Valve Cover Base
| 23***23 | Fastener Group-Valve Cover Base | 1 |
| 24***00 | Spring | 9 |
| 8T***00 | Bolt (M8x1.25x60mm); (M8x1.25x60-mm) | 9 |
116-5386 Flywheel Gp
| 11***86 | Flywheel Group | 1 |
| 25***51 | Gear-Flywheel; (113-Teeth) | 1 |
| 25***61 | Flywheel As | 1 |
205-1321 Gear Gp-Front
| 11***69 | Plate-Thrust | 1 |
| 11***72 | Bearing | 1 |
| 11***19 | Plate-Retaining | 1 |
187-0473 Housing Gp-Flywheel
| 06***55 | Seal-O-Ring (Id=47.22mm) | 1 |
| 13***89 | Clip; (Ladder) | 1 |
| 18***73 | Housing Group-Flywheel | 1 |
245-3260 Housing Gp-Front
| 24***59 | Housing-Front | 1 |
| 24***60 | Housing Group-Front | 1 |
| 6V***18 | Bolt (M8x1.25x50mm); (M8x1.25x50-mm) | 4 |
191-3063 Lifting Gp-Engine
| 16***85 | Plate-Lifting; (Rear) | 1 |
| 19***63 | Lifting Group-Engine | 1 |
| 22***66 | Plate-Lifting; (Front) | 1 |
216-9855 Mounting Gp-Engine
| 09***88 | Clamp; (Hose) | 1 |
| 10***37 | Washer; (24.5x135x12-mm Thk) | 2 |
| 11***30 | Support As | 2 |
219-9943 Pan Gp-Oil
| 14***95 | Plug As | 1 |
| 14***08 | Plug As. | 1 |
| 19***14 | Gasket-Oil Pan; (Engine) | 1 |
265-1400 Piston & Rod Gp
| 16***94 | Bearing; (Connecting Rod) | 1 |
| 16***97 | Bolt | 2 |
| 16***99 | Rod Assem. | 1 |
169-3105 Plug Gp-Engine
| 14***08 | Plug As. | 1 |
| 16***05 | Plug Group-Engine | 1 |
| 18***06 | Plug As; (High Temperature) | 2 |
242-0329 Rocker Arm Gp -Inlet
| 24***28 | Rocker Arm As | 1 |
| 24***29 | Rocker Arm Group; -Inlet | 1 |
| 26***24 | Screw-Valve Adjustment; (M10x1.5-Thd) | 1 |
213-9320 Rocker Arm Gp -Exhaust
| 16***47 | Rocker Arm As | 1 |
| 21***20 | Rocker Arm Group; -Exhaust | 1 |
| 26***24 | Screw-Valve Adjustment; (M10x1.5-Thd) | 1 |
178-3899 Seal Gp-Crankshaft
| 17***99 | Seal Group-Crankshaft | 1 |
| 20***19 | Bolt Assem.; (M6x1) | 9 |
| 24***39 | Seal-Crankshaft; (Front)(Front) | 1 |
172-0961 Support Gp-Engine
| 17***61 | Support Group-Engine | 1 |
| 17***01 | Support-Front | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 6 |
212-8926 Valve Mechanism Gp
| 16***45 | Shaft As-Rocker Arm | 1 |
| 16***59 | Spring | 6 |
| 16***69 | Stand; (End) | 2 |
242-0447 Valve Mechanism Gp
| 16***37 | Lifter As-Valve | 12 |
| 21***26 | Valve Mechanism Group | 1 |
| 24***47 | Valve Mechanism Group | 1 |
Cooling System
188-3826 Cooler Gp-Engine Oil
| 18***26 | Cooler Group-Engine Oil | 1 |
| 20***93 | Gasket | 1 |
| 29***67 | Core As-Oil Cooler; (Engine) | 1 |
216-9860 Cooling Ar
| 21***60 | Cooling Ar | 1 |
| 21***62 | Radiator & Mounting Group | 1 |
| 21***65 | Guard Group-Radiator | 1 |
216-9864 Fan Ar-Reversible
| 14***38 | Adapter, -6 Orb / Orfs X-Long | 2 |
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 2 |
| 16***70 | Connector As | 2 |
223-7634 Fan Gp-Reversible
| 11***73 | Bolt-12 Point Head; (M10x1.5x35-mm) | 4 |
| 1T***65 | Bolt 2.54 cm (1" Long) | 16 |
| 22***34 | Fan Group-Reversible | 1 |
216-9871 Fan Gp-Suction
| 11***73 | Bolt-12 Point Head; (M10x1.5x35-mm) | 4 |
| 13***40 | Spider As-Fan; (8-Blade) | 1 |
| 19***55 | Belt-Serpentine; (Fan Drive) | 1 |
248-8835 Housing & Regulator Gp
| 14***11 | Plug Group | 1 |
| 15***25 | Valve-Fluid Sampling | 1 |
| 15***70 | Cap-Dust; (Engine Coolant) | 1 |
216-9863 Lines Gp-Cooling -Rad, Aftercooler, Hyd Cooler
| 12***67 | Clip Loop | 1 |
| 18***94 | Clip | 1 |
| 1P***79 | Flange (Half) | 8 |
244-0989 Lines Gp-Turbocharger Water
| 11***11 | Tee-O-Ring Port | 1 |
| 12***27 | Tee | 1 |
| 14***11 | Plug Group | 2 |
205-4013 Plug Gp-Water Lines
| 20***13 | Plug Group-Water Lines; -Coolant | 1 |
| 20***34 | Plug-Cup; (73.38-mm Dia) | 2 |
| 7L***56 | Plug-Cup; (67.03-mm Dia) | 2 |
219-4452 Pump Gp-Water
| 14***88 | Seal As; (Water Pump) | 1 |
| 17***44 | Cover | 1 |
| 17***52 | Shaft As | 1 |
202-7674 Pump Gp-Water
| 20***74 | Pump Group-Water | 1 |
| 21***52 | Pump Group-Water | 1 |
| 2M***53 | Seal--To Seal Brake Housing To Main Housing | 1 |
226-3629 Radiator & Hyd Oil Cooler Gp
| 22***29 | Radiator & Hydraulic Oil Cooler Group | 1 |
| 23***82 | Sleeve-Rubber | 8 |
| 23***16 | Radiator Group | 1 |
216-9862 Radiator & Mounting Gp
| 08***10 | Spacer; (16.6x32x26-mm Thk) | 4 |
| 09***35 | Spacer; (11x25x20-mm Thk) | 1 |
| 09***88 | Clamp; (Hose) | 1 |
235-1016 Radiator Gp
| 14***01 | Cap-Radiator | 1 |
| 23***16 | Radiator Group | 1 |
Electrical And Starting System
3e-6328 Alarm Gp -Caterpillar Monitoring System-Action
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 3E***28 | Alarm Group; -Caterpillar Monitoring System-Action | 1 |
197-8820 Alternator Gp-Charging
| 18***38 | Collar | 2 |
| 18***39 | Fan As; (Alternator) | 1 |
| 18***44 | Coil Assem. | 1 |
217-6635 Alternator Gp-Charging
| 12***96 | Pulley-Alternator | 1 |
| 19***41 | Angle Assem. | 1 |
| 19***20 | Alternator Group-Charging; -24-Volt, 95-Ampere | 1 |
321-7032 Battery & Wiring Gp -Heavy Duty
| 11***22 | Battery Group; (12-Volt, Maintenance Free, Wet) | 2 |
| 12***73 | Cap As-Filler; (Battery) | 6 |
| 18***64 | Terminal-Ring | 1 |
262-5304 Battery & Wiring Gp
| 03***12 | Terminal-Ring; (2-Ga, 1/4-In Screw)(Circuit Breaker) | 1 |
| 11***22 | Battery Group; (12-Volt, Maintenance Free, Wet) | 2 |
| 12***73 | Cap As-Filler; (Battery) | 6 |
319-8882 Battery & Wiring Gp
| 03***12 | Terminal-Ring; (2-Ga, 1/4-In Screw)(Circuit Breaker) | 1 |
| 11***22 | Battery Group; (12-Volt, Maintenance Free, Wet) | 2 |
| 12***73 | Cap As-Filler; (Battery) | 6 |
318-8252 Battery & Wiring Gp
| 18***64 | Terminal-Ring | 1 |
| 1L***81 | Spacer .562 In. (14.28 mm) Thick | 1 |
| 1M***19 | Bolt; (5/16-18x1.375-In)(5/16-18x1.375 In) | 1 |
9w-0742 Block Gp-Junction -Battery
| 6V***22 | Tube-Heat Shrink; (25.4-mm Dia)(10-M) | 0 |
| 7F***60 | Washer | 6 |
| 8C***58 | Block Group-Junction; (Battery) | 1 |
246-9365 Control & Mtg Gp-Engine Elek
| 10***28 | Spacer-Special; (12.7x26x28.7-mm Thk) | 4 |
| 14***92 | Stud; (M8x1.25-Thd) | 4 |
| 22***73 | Control Group-Engine Electronic | 1 |
226-7473 Control Gp-Engine Electronic
| 22***73 | Control Group-Engine Electronic | 1 |
| 26***78 | Control Group-Unprogrammed; (Engine) | 1 |
272-0059 Electrical Ar
| 21***37 | Warning Group-Backup | 1 |
| 22***57 | Wiring Group-Engine | 1 |
| 25***27 | Wiring Group-Hydraulic Tank Fill Pump | 1 |
320-1521 Electrical Ar
| 21***37 | Warning Group-Backup | 1 |
| 25***27 | Wiring Group-Hydraulic Tank Fill Pump | 1 |
| 26***91 | Lighting Group-Flood; -Cab Front, Rear, Side, Engine Compartment | 1 |
285-5315 Guard Gp-Electronic Control
| 12***78 | Locknut; (M6x1-Thd) | 2 |
| 26***01 | Sheet As | 1 |
| 26***02 | Guard | 1 |
162-7755 Lamp Gp-Dome
| 15***26 | Switch; (Dome Light) | 1 |
| 15***27 | Lamp; (24-Volt)(Dome Light) | 2 |
| 15***28 | Lens; (Dome Light) | 1 |
321-0836 Lamp Gp-Flood
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 32***36 | Lamp Group-Flood | 1 |
319-7379 Lamp Gp-Flood -Hid
| 22***74 | Bezel; (Hid) | 1 |
| 29***60 | Lamp; (24-Volt, Hid) | 1 |
| 29***39 | Bracket | 1 |
219-6485 Lamp Gp-Flood
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 17***91 | Bracket Assem. | 1 |
| 17***92 | Body Assem. | 1 |
234-4325 Lamp Gp-Flood
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 20***14 | Lens As; (Floodlight) | 1 |
| 23***25 | Lamp Group-Flood; -Suspended Mount | 1 |
219-6487 Lamp Gp-Flood -24-Volt, 65-Watt
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 17***91 | Bracket Assem. | 1 |
| 17***92 | Body Assem. | 1 |
319-7380 Lamp Gp-Flood -Hid
| 22***74 | Bezel; (Hid) | 1 |
| 29***60 | Lamp; (24-Volt, Hid) | 1 |
| 29***43 | Lens | 1 |
250-0850 Lighting Gp-Flood -Cab Front, Side
| 23***25 | Lamp Group-Flood; -Suspended Mount | 3 |
| 25***50 | Lighting Group-Flood; -Cab Front, Side | 1 |
| 25***13 | Cover | 1 |
261-1091 Lighting Gp-Flood -Cab Front, Rear, Side, Engine Compartment
| 09***50 | Nut-Wing | 1 |
| 21***85 | Lamp Group-Flood; -24-Volt-Front | 3 |
| 21***87 | Lamp Group-Flood; -24-Volt, 65-Watt | 5 |
332-8811 Lighting Gp-Flood -Hid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 0 |
332-8810 Lighting Gp-Flood -Hid
| 31***80 | Lamp Group-Flood; -Hid | 6 |
| 33***10 | Lighting Group-Flood; -Hid | 1 |
320-7443 Lighting Gp-Flood -Cab Front, Side
| 09***46 | Screw-Machine; (M8x1.25x16-mm) | 4 |
| 23***25 | Lamp Group-Flood; -Suspended Mount | 2 |
| 32***43 | Lighting Group-Flood; -Cab Front, Side | 1 |
117-3915 Motor Gp-Electric -Hydraulic Tank
| 11***15 | Motor Group-Electric; -Engine Prelubrication-Sec Steering, Brake Release | 1 |
| 6V***01 | Nut; (3/8-16-Thd)(Plate To Rh And Lh Bracket As) | 2 |
| 7X***08 | Washer-Hard; (10.2x16x2-mm Thk) | 2 |
306-9319 Mounting Gp-Wiring
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 13***00 | Clip; (Tab) | 3 |
| 30***19 | Mounting Group-Wiring | 1 |
222-9161 Panel Gp-Circuit Breaker
| 11***23 | Stud-Weld; (M10x1.5x25-mm) | 1 |
| 12***02 | Switch Group-Magnetic; -Starting Motor, Start Relay | 1 |
| 13***00 | Clip; (Tab) | 2 |
320-6147 Panel Gp-Circuit Breaker
| 13***24 | Circuit Breaker As; (30-Ampere) | 1 |
| 17***06 | Circuit Breaker As; (50-Ampere) | 1 |
| 17***10 | Circuit Breaker As; (80-Ampere) | 1 |
238-5022 Panel Gp-Relay
| 13***00 | Clip; (Tab) | 7 |
| 13***89 | Clip; (Ladder) | 1 |
| 17***00 | Suppressor-Arc | 1 |
235-8200 Plug Gp-Connector -Engine Harness, Protective Cover
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 23***00 | Plug Group-Connector; -Engine Harness, Protective Cover | 1 |
| 24***53 | Plug As | 1 |
216-9870 Preheater Gp-Machine -Hydraulic Tank, Engine
| 03***54 | Elbow; (90 Degree Bumped Tube) | 2 |
| 13***00 | Clip; (Tab) | 1 |
| 13***87 | Clip | 1 |
224-9686 Preheater Gp-Machine -Diesel Fired
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 13***73 | Hose-Fuel; (14 cm) | 0 |
| 13***08 | Clamp | 2 |
231-1978 Sensor Gp-Engine
| 19***93 | Sensor Group-Pressure; -Atmospheric | 1 |
| 19***94 | Sensor Group-Pressure; -Engine Oil | 1 |
| 21***47 | Sensor Group-Pressure; -Air Inlet Manifold | 1 |
210-1747 Sensor Gp-Pressure
| 16***04 | Sensor Group-Pressure; (Turbocharger Outlet) | 1 |
| 21***47 | Sensor Group-Pressure; -Air Inlet Manifold | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
197-8394 Sensor Gp-Pressure
| 16***05 | Sensor As-Pressure; (Unfiltered Engine Oil) | 1 |
| 19***94 | Sensor Group-Pressure; -Engine Oil | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
224-4536 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 19***26 | Harness As-Sensor; (16-18 Ga Wire)(Engine Oil Temperature) | 3 |
| 19***27 | Harness As-Sensor; (14-Ga Wire)(Engine Oil Temperature) | 3 |
197-8393 Sensor Gp-Pressure
| 16***03 | Sensor Group-Pressure; (Turbocharger Inlet, Rh) | 1 |
| 19***93 | Sensor Group-Pressure; -Atmospheric | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
236-6220 Sensor Gp-Pressure
| 21***67 | Seal-O-Ring | 1 |
| 22***36 | Sensor Group-Pressure; -Injection Actuation | 1 |
| 23***20 | Sensor Group-Pressure; -Injection Actuation | 1 |
236-6221 Sensor Gp-Speed
| 23***21 | Sensor Group-Speed; -Engine Timing | 1 |
| 24***30 | Sensor Group-Speed; -Engine Timing | 1 |
| 3P***47 | Seal-O-Ring (Id=13.94mm); (13.949mm Id) | 2 |
274-7395 Sensor Gp-Temperature
| 13***45 | Pad; (Connector) | 1 |
| 26***97 | Sensor Group-Temperature; (Air Inlet Manifold) | 1 |
| 27***95 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
274-7396 Sensor Gp-Temperature
| 13***45 | Pad; (Connector) | 1 |
| 26***97 | Sensor Group-Temperature; (Air Inlet Manifold) | 1 |
| 27***96 | Sensor Group-Temperature; -Engine Coolant | 1 |
238-3215 Starting Aid Gp -Air Inlet Manifold
| 1U***46 | Sealant (For Locations A) | 0 |
| 23***15 | Starting Aid Group; -Air Inlet Manifold | 1 |
| 23***16 | Heater As; (Starting Aid) | 1 |
329-9549 Starting Aid Gp-Ether
| 23***45 | Nut-Sleeve; (5/16-24-Thd) | 1 |
| 23***13 | Bracket | 1 |
| 23***34 | Valve Group-Ether Starting | 1 |
311-2626 Starting Aid Gp-Ether
| 13***00 | Clip; (Tab) | 1 |
| 16***95 | Block | 2 |
| 23***45 | Nut-Sleeve; (5/16-24-Thd) | 1 |
327-5254 Starting Ar-Cold Weather
| 32***32 | Battery & Wiring Group; -Heavy Duty | 1 |
| 32***54 | Starting Ar-Cold Weather | 1 |
| 32***49 | Starting Aid Group-Ether | 1 |
327-5253 Starting Ar-Cold Weather -Preheater
| 21***70 | Preheater Group-Machine; -Hydraulic Tank, Engine | 1 |
| 32***32 | Battery & Wiring Group; -Heavy Duty | 1 |
| 32***53 | Starting Ar-Cold Weather; -Preheater | 1 |
329-5861 Starting Gp-Cold Weather
| 11***22 | Battery Group; (12-Volt, Maintenance Free, Wet) | 2 |
| 12***73 | Cap As-Filler; (Battery) | 6 |
| 18***64 | Terminal-Ring | 1 |
223-6377 Starting Motor Gp-Electric
| 10***41 | Starting Motor Group-Electric | 1 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 1 |
| 1S***52 | Terminal-Cable; (00-Ga, 3/8-In Screw) | 1 |
6v-0590 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 13 |
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
104-7041 Starting Motor Gp-Electric
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***41 | Starting Motor Group-Electric | 1 |
| 25***79 | Kit-Solenoid; (24-Volt)(Starting Motor) | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
241-8368 Switch Gp-Magnetic -Main Power Relay-Main Relay
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 24***68 | Switch Group-Magnetic; -Main Power Relay-Main Relay | 1 |
209-5582 Switch Gp-Magnetic -Start Relay-Starting Aid Heater Relay
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 20***82 | Switch Group-Magnetic; -Starting Aid Heater Relay-Air Inlet Heater Relay | 1 |
125-1302 Switch Gp-Magnetic -Start Relay
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***02 | Switch Group-Magnetic; -Starting Motor, Start Relay | 1 |
179-0006 Switch Gp-Magnetic -Hyd Tank Fill Pump/Motor Relay
| 17***06 | Switch Group-Magnetic; -Hydraulic Tank Fill Pump/Motor Relay | 1 |
| 1B***78 | Nut,Plain,Hexagon Rod To Lever Uoc:Bsv,Bsx | 2 |
| 4D***26 | Washer,Lock Starter Ground Cable, Internal And External Teeth | 2 |
234-6613 Switch Gp-Position -Hydraulic Lockout
| 08***83 | Washer; (0.8mm Thk) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***99 | Switch As; (Hydraulic Lockout, Neutral Start) | 1 |
258-0883 Switch Gp-Pressure -Fuel Filter, Differential
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 25***83 | Switch Group-Pressure; -Fuel Filter, Differential-Fuel Filter | 1 |
158-6634 Switch Gp-Toggle
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 15***34 | Switch Group-Toggle; -Stairway Access Lights | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
165-5970 Switch Gp-Toggle -Hyd Tank Fill Pump, Motor
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***70 | Switch Group-Toggle; -Engine Shutoff-Starting Aid-Diagnostic Mode Select | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
239-1134 Valve Gp-Ether Starting
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 23***34 | Valve Group-Ether Starting | 1 |
217-2437 Warning Gp-Backup
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***75 | Horn As; (24-Volt, High Tone) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
253-2606 Wiring Gp-Boom -Floodlights
| 21***85 | Lamp Group-Flood; -24-Volt-Front | 2 |
| 25***06 | Wiring Group-Boom; -Floodlights | 1 |
| 25***09 | Harness As-Lighting; (Boom) | 1 |
212-8018 Wiring Gp-Boom -Floodlights
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
280-0558 Wiring Gp-Cab
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 3 |
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 12 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
280-0561 Wiring Gp-Console
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
236-6226 Wiring Gp-Electronic Control -Engine
| 10***20 | Plug As-Connector; (2-Pin) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
222-9157 Wiring Gp-Engine
| 12***33 | Clip | 1 |
| 13***00 | Clip; (Tab) | 2 |
| 13***51 | Spacer; (11x19x6-mm Thk) | 1 |
320-8403 Wiring Gp-Engine
| 03***12 | Terminal-Ring; (2-Ga, 1/4-In Screw)(Circuit Breaker) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
269-3410 Wiring Gp-Heater -Air Inlet Manifold
| 20***77 | Bolt-Flange Head; (M8x1x25-mm) | 2 |
| 20***82 | Switch Group-Magnetic; -Starting Aid Heater Relay-Air Inlet Heater Relay | 1 |
| 22***77 | Wire As | 1 |
255-6927 Wiring Gp-Hyd Tank Fill Pump
| 03***07 | Terminal-Ring; (0-Ga, 3/8-In Screw) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***97 | Diode As; (Bipolar) | 1 |
272-0060 Wiring Gp-Machine
| 03***48 | Clip; (11.11mm .437in Id) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
320-1523 Wiring Gp-Machine
| 03***48 | Clip; (11.11mm .437in Id) | 3 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
Engine Arrangement
264-0399 Engine Ar-Complete
| 11***86 | Flywheel Group | 1 |
| 11***94 | Fastener Group-Flywheel; (Flywheel) | 1 |
| 11***27 | Cover Group-Front Housing; -Accessory Drive | 1 |
264-0403 Engine Ar-Core
| 16***48 | Crankshaft Group | 1 |
| 18***26 | Cooler Group-Engine Oil | 1 |
| 19***98 | Pump Group-Engine Oil; (Engine Oil) | 1 |
213-2400 Installation Ar-Engine
| 15***43 | Coupling & Mtg Group-Pump | 1 |
| 21***00 | Installation Ar-Engine | 1 |
| 21***55 | Mounting Group-Engine | 1 |
Frame And Body
316-6440 Box Gp-Battery
| 31***10 | Box As-Battery, Exhaust Valve, Exhaust Valve; Serviced As 38***91. | 1 |
| 31***25 | Plate | 2 |
| 31***31 | Plate | 1 |
333-0597 Brace Gp
| 33***97 | Brace Group | 1 |
| 33***02 | Actuator, Etr Fuel Control, Electronic Fuel Control Actuator, Brace As | 1 |
| 33***20 | Plate | 1 |
272-0054 Counterweight Gp
| 14***06 | Plug As | 1 |
| 18***06 | Plug As; (High Temperature) | 1 |
| 21***60 | Plate As | 1 |
272-0052 Frame Gp-Upper
| 08***87 | Grommet | 5 |
| 09***83 | Shim (1.0 mm Thick) | 1 |
| 09***90 | Shim (1.0 mm Thick) | 2 |
227-6087 Gear & Bearing Gp-Swing
| 19***78 | Gear & Bearing Group-Swing | 1 |
| 22***87 | Gear & Bearing Group-Swing | 1 |
| 22***88 | Gear & Bearing Group-Swing | 1 |
224-9122 Gear & Bearing Gp-Swing
| 09***95 | Plug | 1 |
| 1U***46 | Sealant (For Locations A) | 1 |
| 22***22 | Gear & Bearing Group-Swing | 1 |
227-6088 Gear & Bearing Gp-Swing
| 22***73 | Seal-Dust | 2 |
| 22***88 | Gear & Bearing Group-Swing | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
199-4478 Gear & Bearing Gp-Swing
| 11***83 | Seal (1100 cm) (Order By The Centimeter) | 0 |
| 19***78 | Gear & Bearing Group-Swing | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
321-8957 Guard Gp-Lighting
| 1K***50 | Spring | 1 |
| 25***84 | Plate | 1 |
| 25***86 | Plate-Mounting | 1 |
261-1089 Guard Gp-Lighting
| 19***78 | Hinge | 1 |
| 1K***50 | Spring | 1 |
| 25***80 | Guard As | 1 |
216-9865 Guard Gp-Radiator
| 20***38 | Rod As | 1 |
| 21***65 | Guard Group-Radiator | 1 |
| 22***43 | Angle | 1 |
247-7641 Guard Gp-Radiator
| 24***41 | Guard Group-Radiator | 1 |
| 26***82 | Latch As; (Heavy-Duty) | 1 |
| 26***11 | Plate | 1 |
272-0053 Hood Gp
| 15***11 | Lockwasher | 3 |
| 15***59 | Eyebolt; (M8x1.25x100-mm) | 2 |
| 21***15 | Strip | 1 |
212-8019 Plate Gp-Frame
| 11***23 | Stud-Weld; (M10x1.5x25-mm) | 2 |
| 21***19 | Plate Group-Frame | 1 |
| 7T***99 | Link | 6 |
280-1999 Step As
| 28***99 | Step As | 1 |
235-6512 Step Gp
| 17***94 | Pin As | 2 |
| 23***25 | Step As | 1 |
| 23***12 | Step Group | 1 |
217-9693 Tilt Gp-Hood
| 12***18 | Sleeve | 1 |
| 14***25 | Connector As. | 4 |
| 17***07 | Clip | 2 |
Fuel System
224-5005 Filter Gp-Fuel -Secondary
| 14***75 | Valve-Drain; (Fuel) | 1 |
| 16***77 | Plug As | 2 |
| 17***48 | Valve-Drain; (Fuel Filter) | 1 |
174-9570 Filter Gp-Water Sep & Fuel -Primary
| 17***70 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 22***78 | Seal-Ring; (Fuel And Water Sep Filter) | 1 |
| 32***44 | Filter As-Water Sep & Fuel; (Primary) | 1 |
267-3360 Injector Gp-Fuel
| 10***07 | Seal-O-Ring; (Fuel System) | 1 |
| 14***03 | Seal-O-Ring; (Fuel System) | 1 |
| 14***40 | Ring-Backup; (37.36mm Od), Flasher Switch; Hazard, Replaces 421164a1, Flasher Switch | 1 |
293-4072 Injector Gp-Fuel
| 10***07 | Seal-O-Ring; (Fuel System) | 1 |
| 14***03 | Seal-O-Ring; (Fuel System) | 2 |
| 14***40 | Ring-Backup; (37.36mm Od), Flasher Switch; Hazard, Replaces 421164a1, Flasher Switch | 1 |
328-2574 Injector Gp-Fuel
| 10***07 | Seal-O-Ring; (Fuel System) | 1 |
| 14***03 | Seal-O-Ring; (Fuel System) | 2 |
| 14***40 | Ring-Backup; (37.36mm Od), Flasher Switch; Hazard, Replaces 421164a1, Flasher Switch | 1 |
216-9868 Lines Gp-Fuel
| 06***51 | Clamp | 2 |
| 09***86 | Clamp; (Hose) | 3 |
| 14***19 | Connector As | 1 |
235-8725 Pump Gp-Filter & Fuel Transfer -Primary
| 17***70 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 17***00 | Seal; (Fuel) | 2 |
| 23***24 | Pump Group-Fuel Transfer | 1 |
267-3361 Pump Gp-Fuel Injection
| 23***51 | Bolt-Socket Head; (M8x1.25x65-mm) | 2 |
| 26***60 | Injector Group-Fuel | 1 |
| 26***61 | Pump Group-Fuel Injection | 1 |
267-3362 Pump Gp-Fuel Injection
| 26***61 | Pump Group-Fuel Injection | 6 |
| 26***62 | Pump Group-Fuel Injection | 1 |
188-6121 Pump Gp-Fuel Prm & Prim Filter -With Water Separator
| 03***94 | Connector-Flared | 1 |
| 13***27 | Seal-O-Ring; (19.18mm Id Base Side) | 2 |
| 18***21 | Pump Group-Fuel Prm & Prim Filter; -With Water Separator-Primary | 1 |
190-8977 Pump Gp-Fuel Prm & Water Sep -Primary Fuel Filter
| 17***70 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 19***70 | Base Assembly; (Fuel Priming Pump) | 1 |
| 19***77 | Pump Group-Fuel Prm & Water Sep; -Primary Fuel Filter | 1 |
256-6915 Pump Gp-Fuel Transfer
| 03***94 | Connector-Flared | 1 |
| 13***27 | Seal-O-Ring; (19.18mm Id Base Side) | 2 |
| 20***34 | Regulator-Pressure; (Fuel) | 1 |
271-2234 Pump Gp-Unit Injector Hyd
| 03***50 | Elbow (Check Valve Drain Tube) | 1 |
| 15***06 | Seal-O-Ring; (11.89mm Id) | 1 |
| 18***99 | Connector As | 2 |
232-0343 Regulator Gp-Fuel Pressure
| 23***43 | Regulator Group-Fuel Pressure | 1 |
| 29***20 | Regulator As; (Fuel Pressure) | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 1 |
273-2445 Regulator Gp-Fuel Pressure
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 23***43 | Regulator Group-Fuel Pressure | 1 |
| 27***45 | Regulator Group-Fuel Pressure | 1 |
269-0681 Tank Gp-Fuel -Auxiliary
| 09***25 | Seal-O-Ring (Id=154.30mm) | 1 |
| 14***35 | Connect Group; (Each Includes) | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
Hydraulic System
3g-7232 Bypass Gp-Filter -Hydraulic Oil
| 2J***64 | Plug-Drain; (Hydraulic Filter Bypass) | 1 |
| 3G***73 | Spring; (Inner) | 1 |
| 3G***32 | Bypass Group-Filter; -Hydraulic Oil | 1 |
154-6643 Coupling & Mtg Gp-Pump
| 15***58 | Flange | 1 |
| 15***59 | Hub | 1 |
| 15***43 | Coupling & Mtg Group-Pump | 1 |
177-2521 Cover Gp-Pump
| 12***62 | Seal-O-Ring | 1 |
| 17***21 | Cover Group-Pump | 1 |
| 17***30 | Cover | 1 |
171-2446 Cover Gp-Valve End
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
| 2D***98 | Seal-O-Ring; (44.12mm Id) | 1 |
224-9037 Cylinder & Lines Gp-Tilt -Cab Leveling
| 14***35 | Hose As | 1 |
| 14***54 | Elbow; (45) (-8/-8 Orb/Orfs) | 2 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 10 |
282-3014 Cylinder & Mtg Gp-Boom
| 10***96 | Bolt-Socket Head; (M10x1.5x50-mm) | 8 |
| 14***27 | Connector Group | 2 |
| 14***76 | Elbow As | 1 |
327-8141 Cylinder & Mtg Gp-Boom
| 12***10 | Support As | 1 |
| 12***11 | Support As. | 1 |
| 16***77 | Elbow Assembly | 1 |
282-3152 Cylinder & Mtg Gp-Saw
| 10***96 | Bolt-Socket Head; (M10x1.5x50-mm) | 8 |
| 14***27 | Connector Group | 2 |
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
282-3013 Cylinder & Mtg Gp-Stick
| 10***96 | Bolt-Socket Head; (M10x1.5x50-mm) | 8 |
| 14***27 | Connector Group | 2 |
| 14***76 | Elbow As | 1 |
282-3109 Cylinder & Mtg Gp-Stick & Saw -Harvester Head, Lh
| 28***13 | Cylinder & Mtg Group-Stick | 1 |
| 28***09 | Cylinder & Mtg Group-Stick & Saw; -Harvester Head, Lh | 1 |
| 28***52 | Cylinder & Mtg Group-Saw | 1 |
217-9701 Cylinder Ar-Hydraulic -Boom, Stick, Saw Tilt
| 10***96 | Bolt-Socket Head; (M10x1.5x50-mm) | 20 |
| 14***27 | Connector Group | 6 |
| 14***76 | Elbow As | 2 |
248-6874 Cylinder Ar-Hydraulic -Boom, Stick
| 24***74 | Cylinder Ar-Hydraulic; -Boom, Stick | 1 |
| 28***13 | Cylinder & Mtg Group-Stick | 1 |
| 28***14 | Cylinder & Mtg Group-Boom | 1 |
322-3568 Cylinder Gp-Boom
| 08***05 | Stop | 1 |
| 08***50 | Ring; (Back Up) | 1 |
| 09***29 | Ring; (Retaining) | 2 |
251-8281 Cylinder Gp-Hood Tilt
| 10***17 | Valve Group-Counterbalance; -Hood Tilt Cylinder | 1 |
| 11***15 | Clevis | 1 |
| 23***74 | Pin | 2 |
215-9097 Cylinder Gp-Hydraulic -Boom
| 08***05 | Stop | 1 |
| 09***29 | Ring; (Retaining) | 2 |
| 09***31 | Seal-O-Ring; (Id=119.60mm) | 1 |
215-9092 Cylinder Gp-Stick -Boom
| 08***05 | Stop | 1 |
| 09***29 | Ring; (Retaining) | 2 |
| 09***31 | Seal-O-Ring; (Id=119.60mm) | 1 |
222-9149 Cylinder Gp-Tilt -Side, For Cab Leveling
| 09***43 | Seal-Lip Type | 2 |
| 09***12 | Bearing-Sleeve | 1 |
| 16***09 | Seal As-Buffer | 1 |
254-5457 Cylinder Gp-Tilt -Saw
| 08***05 | Stop | 1 |
| 09***29 | Ring; (Retaining) | 2 |
| 09***31 | Seal-O-Ring; (Id=119.60mm) | 1 |
274-7480 Cylinder Gp-Tilt -Saw
| 09***71 | Ring; (Retaining) | 1 |
| 09***29 | Ring; (Retaining) | 2 |
| 09***31 | Seal-O-Ring; (Id=119.60mm) | 1 |
282-9611 Cylinder Gp-Tilt -Rear, For Cab Leveling
| 06***61 | Ring-Retaining | 4 |
| 15***37 | Bearing | 2 |
| 16***09 | Seal As-Buffer | 1 |
217-9689 Drive Ar-Swing
| 09***55 | Pin | 1 |
| 11***29 | Bolt; (M24x3x100-mm) | 16 |
| 16***73 | Valve Group-Shutoff | 1 |
220-8623 Drive Gp-Swing
| 20***08 | Drive Group-Swing | 1 |
| 22***23 | Drive Group-Swing | 1 |
| 28***04 | Motor & Mtg Group-Swing | 1 |
201-7808 Drive Gp-Swing
| 09***30 | Ring; (Retaining) | 2 |
| 09***31 | Ring - Retaining | 1 |
| 09***57 | Gauge-Oil Level (Dipstick) | 1 |
188-2084 Filter & Valve Gp-Pilot -Hydraulic Oil
| 09***84 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
| 09***96 | Seal-O-Ring (Id=28.70mm) | 1 |
158-8987 Filter & Valve Gp-Pilot -Hydraulic Oil
| 09***84 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
| 09***96 | Seal-O-Ring (Id=28.70mm) | 1 |
289-7836 Filter & Valve Gp-Pilot -Hydraulic Oil
| 09***84 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
| 09***96 | Seal-O-Ring (Id=28.70mm) | 1 |
126-2075 Filter Gp-Oil -Case Drain
| 09***21 | Filter-Oil; (Advanced Efficiency)(Hydraulic, Case Drain) | 1 |
| 12***75 | Filter Group-Oil; -Hyraulic Oil-Hydraulic, Case Drain | 1 |
| 12***76 | Base As; (Oil Filter) | 1 |
222-7092 Filter Gp-Oil -Hydraulic
| 1A***35 | Bolt 2.00 In. (5.08 cm) Long | 4 |
| 1R***92 | Filter Element As-Oil; (Advanced Efficiency) | 3 |
| 22***92 | Filter Group-Oil; -Hydraulic | 1 |
289-8194 Filter Gp-Oil -Hydraulic, Case Drain
| 09***21 | Filter-Oil; (Advanced Efficiency)(Hydraulic, Case Drain) | 1 |
| 28***94 | Filter Group-Oil; -Hydraulic, Case Drain | 1 |
| 28***95 | Head As-Filter | 1 |
227-0620 Gauge Gp-Sight -Hydraulic Oil Level
| 09***19 | Seal-O-Ring (Id=15.80mm) | 4 |
| 22***20 | Gauge Group-Sight; -Hydraulic Oil Level | 1 |
| 23***57 | Pipe | 1 |
291-1126 Head Gp-Motor
| 08***59 | Plug As | 1 |
| 09***32 | Bolt-Socket Head; (M12x1.75x95-mm) | 2 |
| 09***04 | Bolt-Socket Head; (M12x1.75x110-mm) | 4 |
308-4488 Head Gp-Pump -Main Hydraulic
| 12***94 | Plug; (Break Off) | 1 |
| 12***17 | Plug | 1 |
| 12***84 | Pin; (Threaded) | 2 |
270-4694 Head Gp-Pump -Main Hydraulic
| 12***94 | Plug; (Break Off) | 1 |
| 12***17 | Plug | 1 |
| 12***62 | Seal-O-Ring | 2 |
272-0057 Hydraulic Ar
| 21***89 | Drive Ar-Swing | 1 |
| 21***90 | Pump & Lines Group-Hydraulic Tank Fill | 1 |
| 21***92 | Lines Group-Return | 1 |
284-5616 Hydraulic Ar
| 21***00 | Pump & Mtg Group-Main Hydraulic; -Felling Head | 1 |
| 25***50 | Lines Group-Saw | 1 |
| 25***68 | Film-Instruction; -Joystick Control, Pattern 1 | 1 |
282-3068 Hydraulic Ar-Harvester -Without Linkage
| 21***97 | Valve & Mtg Group-Main Control; -7-Bank | 1 |
| 21***00 | Pump & Mtg Group-Main Hydraulic; -Felling Head | 1 |
| 22***71 | Control & Mtg Group-Joystick; -Harvester Head | 1 |
272-7251 Hydraulic Ar-Upper
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 11***17 | Clip | 1 |
| 13***00 | Clip; (Tab) | 3 |
245-1969 Kit-Seal -Feed Reducer Plug
| 21***30 | Kit-Seal; (Control Valve) | 1 |
| 24***69 | Kit-Seal; -Feed Reducer Plug | 1 |
253-2603 Lines Gp-Boom -Harvester Head
| 11***60 | Union | 1 |
| 14***55 | Union As | 8 |
| 15***26 | Union Assembly | 4 |
217-9705 Lines Gp-Boom -Felling Head
| 14***55 | Union As | 22 |
| 15***26 | Union Assembly | 2 |
| 20***29 | Tag-Identification; (Saw Oil Drain) | 2 |
306-9318 Lines Gp-Control -Crossover, Travel
| 12***40 | Connector | 1 |
| 16***27 | Connector As | 4 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 4 |
282-3102 Lines Gp-Front -Boom, Felling Head
| 20***30 | Tag-Identification; (Aa Head) | 2 |
| 20***31 | Tag-Identification; (Aa Rod) | 2 |
| 20***32 | Tag-Identification; (Ga Head) | 2 |
282-3101 Lines Gp-Front -Boom, Stick
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 8 |
| 10***93 | Flange | 2 |
| 10***77 | Bolt-Socket Head; (M10x1.5x45-mm) | 4 |
282-3065 Lines Gp-Front -Boom, Harvester Head
| 14***27 | Connector Group | 3 |
| 14***31 | Tee Group | 1 |
| 15***36 | Reducer As | 1 |
217-9707 Lines Gp-Front -Boom, Felling Head
| 10***77 | Bolt-Socket Head; (M10x1.5x45-mm) | 4 |
| 15***62 | Union As | 1 |
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 13 |
282-3064 Lines Gp-Front -Boom Cylinder, Harvester Head
| 03***57 | Washer; (13x26x6-mm Thk) | 4 |
| 10***77 | Bolt-Socket Head; (M10x1.5x45-mm) | 4 |
| 15***62 | Union As | 1 |
253-2604 Lines Gp-Front -Boom, Harvester Head
| 03***57 | Washer; (13x26x6-mm Thk) | 4 |
| 10***77 | Bolt-Socket Head; (M10x1.5x45-mm) | 4 |
| 14***27 | Connector Group | 3 |
317-5827 Lines Gp-Hood Tilt
| 14***25 | Connector As. | 2 |
| 14***68 | Elbow Group | 1 |
| 15***33 | Elbow, 45°,-6 Orb /-4 Orfs | 1 |
282-3108 Lines Gp-Motor
| 14***55 | Union As | 8 |
| 20***27 | Tag-Identification; (Saw Oil Supply) | 8 |
| 20***28 | Tag-Identification; (Saw Oil Return) | 8 |
285-0933 Lines Gp-Motor
| 11***60 | Union | 1 |
| 14***55 | Union As | 4 |
| 15***26 | Union Assembly | 4 |
272-0058 Lines Gp-Pilot
| 09***49 | Bolt; (M8x1.25x40-mm) | 2 |
| 11***18 | Tee-Swivel | 1 |
| 11***65 | Bracket | 1 |
306-9317 Lines Gp-Pilot -Power Shift Option
| 11***18 | Tee-Swivel | 1 |
| 13***19 | Hose As | 1 |
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 1 |
282-3071 Lines Gp-Pump
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 11***17 | Clip | 1 |
| 13***00 | Clip; (Tab) | 3 |
275-7941 Lines Gp-Pump
| 10***02 | Bolt-Socket Head; (M12x1.75x30-mm) | 2 |
| 10***19 | Bolt; (Socket Head) (M12x1.75x70mm) | 2 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
217-9692 Lines Gp-Return
| 11***34 | Tee-O-Ring | 1 |
| 12***75 | Filter Group-Oil; -Hyraulic Oil-Hydraulic, Case Drain | 2 |
| 14***28 | Connector Assem. | 1 |
256-0350 Lines Gp-Saw
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 11***17 | Clip | 1 |
| 13***00 | Clip; (Tab) | 3 |
253-2607 Lines Gp-Saw
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 11***17 | Clip | 1 |
| 13***00 | Clip; (Tab) | 2 |
217-9709 Lines Gp-Saw
| 21***09 | Lines Group-Saw | 1 |
| 28***71 | Lines Group-Pump | 1 |
| 28***08 | Lines Group-Motor | 1 |
217-9703 Lines Gp-Stick
| 14***18 | Reducer; (-8orfs/-12orfs Swivel) | 2 |
| 14***55 | Union As | 14 |
| 15***26 | Union Assembly | 1 |
253-2602 Lines Gp-Stick
| 11***60 | Union | 1 |
| 14***55 | Union As | 6 |
| 15***26 | Union Assembly | 3 |
224-9038 Lines Gp-Travel Motor
| 11***31 | Hose As | 2 |
| 14***71 | Hose As | 2 |
| 14***60 | Grommet | 2 |
281-6404 Motor & Mtg Gp-Swing
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 1 |
| 14***55 | Elbow As. | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
206-1513 Motor & Mtg Gp-Swing
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 1 |
| 14***55 | Elbow As. | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
188-4175 Motor Gp-Swing
| 09***00 | Seal-O-Ring (Id=33.70mm) | 2 |
| 09***33 | Seal-Lip Type | 1 |
| 09***11 | Pin; (Spring) | 2 |
179-9775 Motor Gp-Swing
| 17***75 | Motor Group-Swing | 1 |
| 18***30 | Valve Group-Relief; -Swing Motor | 2 |
| 18***75 | Motor Group-Swing | 1 |
320-2394 Motor Gp-Travel
| 12***13 | Seal; (Shaft) | 1 |
| 12***14 | Shim; (3-mm Thk) | 1 |
| 12***79 | Setscrew-Socket; (M12x1.75-Thd) | 1 |
279-9874 Motor Gp-Travel
| 12***13 | Seal; (Shaft) | 1 |
| 12***14 | Shim; (3-mm Thk) | 1 |
| 19***21 | Rotating Group-Motor; -Travel | 1 |
206-6508 Plug Gp-Hydraulic Lines
| 20***08 | Plug Group-Hydraulic Lines | 1 |
| 6V***30 | Cap As -Lines From Rotate Valve Work | 5 |
| 6V***32 | Cap As | 4 |
217-9690 Pump & Lines Gp-Hyd Tank Fill
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 15***44 | Elbow Group | 1 |
| 20***66 | Pump & Motor Group; -Hydraulic Tank Fill | 1 |
205-5266 Pump & Motor Gp -Hydraulic Tank Fill
| 11***15 | Motor Group-Electric; -Engine Prelubrication-Sec Steering, Brake Release | 1 |
| 11***68 | Gasket | 1 |
| 20***05 | Seal Kit; (Includes Seal And Rings) | 0 |
212-8039 Pump & Motor Gp-Hood Tilt
| 10***96 | Screen-Filter | 1 |
| 10***97 | Tube | 1 |
| 10***98 | Tube | 1 |
308-0095 Pump & Mtg Gp-Main Hydraulic
| 30***94 | Pump Group-Piston; -Main Hydraulic | 1 |
| 30***95 | Pump & Mtg Group-Main Hydraulic | 1 |
| 8T***60 | Washer-Hard (For Use With 7/16 In Bolts) | 7 |
217-9700 Pump & Mtg Gp-Main Hydraulic -Felling Head
| 21***00 | Pump & Mtg Group-Main Hydraulic; -Felling Head | 1 |
| 26***29 | Pump Group-Piston; -Main Hydraulic, Felling Head | 1 |
| 8T***60 | Washer-Hard (For Use With 7/16 In Bolts) | 7 |
283-2529 Pump & Mtg Gp-Saw
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 11***17 | Clip | 1 |
| 13***00 | Clip; (Tab) | 3 |
268-8259 Pump Gp-Piston
| 09***70 | Bolt-Socket Hd; (M12 X 1.75 X 45) | 4 |
| 11***49 | Fitting As; (Quick Disconnect) | 1 |
| 12***85 | Elbow 90 Degree | 1 |
308-0094 Pump Gp-Piston -Main Hydraulic
| 08***01 | Plug As | 3 |
| 09***91 | Ball Bearing | 1 |
| 12***13 | Seal; (Shaft) | 1 |
268-6729 Pump Gp-Piston -Main Hydraulic, Felling Head
| 08***01 | Plug As | 3 |
| 09***91 | Ball Bearing | 1 |
| 12***13 | Seal; (Shaft) | 1 |
190-8121 Rotating Gp-Motor
| 19***21 | Rotating Group-Motor; -Travel | 1 |
| 19***83 | Rotating Group-Motor; -Travel | 1 |
| 19***86 | Shaft Group-Hydraulic Motor | 1 |
191-0883 Rotating Gp-Motor -Travel
| 11***19 | Screw-Special; (M5x0.8x8-mm) | 14 |
| 12***29 | Plate-Control | 1 |
| 12***30 | Pin-Center | 1 |
283-5979 Rotating Gp-Pump -Main Hydraulic
| 17***02 | Pin | 1 |
| 17***10 | Spring | 4 |
| 17***11 | Plate | 1 |
216-0034 Rotating Gp-Pump -Hydraulic-Main Hydraulic
| 12***87 | Ring-Retaining | 1 |
| 17***87 | Shim; (3.3-mm Thk) | 1 |
| 17***88 | Shim; (3.4-mm Thk) | 1 |
216-0035 Rotating Gp-Pump -Hydraulic-Main Hydraulic
| 12***87 | Ring-Retaining | 1 |
| 17***91 | Plate; (2.6-mm Thk) | 1 |
| 17***92 | Plate; (2.65-mm Thk) | 1 |
283-5977 Rotating Gp-Pump -Main Hydraulic
| 12***87 | Ring-Retaining | 1 |
| 17***87 | Shim; (3.3-mm Thk) | 1 |
| 17***88 | Shim; (3.4-mm Thk) | 1 |
216-0028 Rotating Gp-Pump -Main Hydraulic
| 14***60 | Ring; (Seal) | 2 |
| 17***02 | Pin | 1 |
| 17***03 | Piston As | 7 |
283-5978 Rotating Gp-Pump -Main Hydraulic
| 12***87 | Ring-Retaining | 1 |
| 17***91 | Plate; (2.6-mm Thk) | 1 |
| 17***92 | Plate; (2.65-mm Thk) | 1 |
191-0886 Shaft Gp-Hydraulic Motor
| 09***29 | Ring; (Retaining) | 1 |
| 19***86 | Shaft Group-Hydraulic Motor | 1 |
| 19***55 | Kit-Bearing | 1 |
224-9040 Swivel Gp -With Tilt Function
| 09***25 | Seal-O-Ring (Id=89.60mm) | 3 |
| 09***16 | Seal-O-Ring (Id=109.40mm) | 2 |
| 14***63 | Seal As | 10 |
295-0133 Swivel Gp -With Tilt Function
| 09***25 | Seal-O-Ring (Id=89.60mm) | 3 |
| 09***16 | Seal-O-Ring (Id=109.40mm) | 2 |
| 14***63 | Seal As | 10 |
272-0055 Tank Gp-Hydraulic & Fuel
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 5 |
| 09***49 | Bolt; (M8x1.25x40-mm) | 6 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
306-9323 Tube Gp-Diffuser -Hydraulic Tank
| 27***59 | Tube As | 1 |
| 30***23 | Tube Group-Diffuser; -Hydraulic Tank | 1 |
| 5P***66 | Capscrew; (Hex Hd) (1/2-13 Nc X 1 1/2) (Gd 8 Z) | 2 |
217-9695 Valve & Lines Gp-Travel Cont -With Tilt Function
| 09***43 | Retainer | 1 |
| 12***40 | Connector | 1 |
| 14***39 | Connector As. | 1 |
256-0349 Valve & Mtg Gp-Main Control -7-Bank
| 11***60 | Union | 1 |
| 12***37 | Clip-Loop | 2 |
| 12***23 | Bracket Assem. | 1 |
285-2268 Valve & Mtg Gp-Main Control -7-Bank
| 11***05 | Hose As | 1 |
| 12***23 | Bracket Assem. | 1 |
| 14***01 | Hose As | 1 |
217-9697 Valve & Mtg Gp-Main Control -7-Bank
| 14***15 | Hose As | 1 |
| 14***09 | Adapter As | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 3 |
328-1689 Valve Gp-Bank 7
| 22***33 | Valve Group-Control; -Accum Arms-Hf, Lo/Hi Flow-Hp-Grapple-Hf, High Flow-Hp | 2 |
| 22***35 | Valve Group-Control; -Swing | 1 |
| 22***37 | Valve Group-Control; -Felling Head Lateral Tilt | 1 |
194-6973 Valve Gp-Brake -Pressure Release
| 09***56 | Setscrew-Socket | 1 |
| 10***04 | Seal-O-Ring | 1 |
| 16***67 | Dowel | 1 |
192-3293 Valve Gp-Check & Relief -Travel Motor
| 19***93 | Valve Group-Check & Relief; -Travel Motor | 1 |
| 19***94 | Poppet | 1 |
| 19***08 | Spring | 1 |
338-1090 Valve Gp-Control
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 16***40 | Valve Group-Relief; (Line) | 1 |
| 16***43 | Valve Group-Relief; (Control Valve) | 1 |
247-9847 Valve Gp-Control
| 22***44 | Kit-Relief Valve; (Main, Load Sensing) | 1 |
| 22***50 | Kit-Control Valve; (Seal)(Control Valve) | 1 |
| 24***47 | Valve Group-Control; -Inlet | 1 |
325-4351 Valve Gp-Control -Boom
| 32***51 | Valve Group-Control; -Boom | 1 |
247-7010 Valve Gp-Control -Saw Motor Control
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
234-0586 Valve Gp-Control
| 22***44 | Kit-Relief Valve; (Main, Load Sensing) | 1 |
| 22***50 | Kit-Control Valve; (Seal)(Control Valve) | 1 |
| 23***86 | Valve Group-Control; -Inlet | 1 |
234-0587 Valve Gp-Control -Boom
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 16***43 | Valve Group-Relief; (Control Valve) | 2 |
227-2137 Valve Gp-Control
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 16***43 | Valve Group-Relief; (Control Valve) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
229-6681 Valve Gp-Control -Forward, Side Leveling
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
227-2135 Valve Gp-Control -Swing
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
| 17***47 | Kit-Spring; (Control Valve) | 1 |
227-2140 Valve Gp-Control -Travel
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
227-2141 Valve Gp-Control -End Cover
| 22***41 | Valve Group-Control; -End Cover | 1 |
| 22***50 | Kit-Control Valve; (Seal)(Control Valve) | 1 |
| 22***51 | Kit-Control Valve; (Mounting Brackets) | 1 |
242-4240 Valve Gp-Control -Intermittent Saw, 2-Bank
| 22***41 | Valve Group-Control; -End Cover | 1 |
| 22***50 | Kit-Control Valve; (Seal)(Control Valve) | 1 |
| 22***51 | Kit-Control Valve; (Mounting Brackets) | 1 |
227-2133 Valve Gp-Control
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 16***40 | Valve Group-Relief; (Line) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
244-7363 Valve Gp-Control -Stick
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 16***43 | Valve Group-Relief; (Control Valve) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
218-8377 Valve Gp-Control -Travel, 4-Bank, With Tilt Function
| 21***77 | Valve Group-Control; -Travel, 4-Bank, With Tilt Function | 1 |
| 22***31 | Valve Group-Control; -Travel | 1 |
| 22***40 | Valve Group-Control; -Travel | 2 |
256-0520 Valve Gp-Control -Head Tilt-Hf, Blank-Hp
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 16***43 | Valve Group-Relief; (Control Valve) | 2 |
227-2131 Valve Gp-Control -Travel
| 22***31 | Valve Group-Control; -Travel | 1 |
| 22***44 | Kit-Relief Valve; (Main, Load Sensing) | 1 |
| 22***46 | Kit-Valve | 1 |
338-1091 Valve Gp-Control
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 16***43 | Valve Group-Relief; (Control Valve) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
227-2132 Valve Gp-Control -Inlet
| 17***00 | Valve Group-Flow Control; (Pilot Supply)(Inlet) | 1 |
| 17***01 | Adapter As-Valve | 1 |
| 17***53 | Fitting-37 Degree | 1 |
244-7364 Valve Gp-Control -Lateral Tilt-Hf, Rotator-Hp
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 16***43 | Valve Group-Relief; (Control Valve) | 2 |
105-8117 Valve Gp-Counterbalance -Hood Tilt Cylinder
| 10***17 | Valve Group-Counterbalance; -Hood Tilt Cylinder | 1 |
| 11***16 | Kit-Seal; (Counterbalance Valve) | 1 |
291-1122 Valve Gp-Flow Control
| 12***98 | Seat | 2 |
| 12***99 | Seat | 2 |
| 19***86 | Plug | 2 |
256-0500 Valve Gp-Main Control -7-Bank
| 22***32 | Valve Group-Control; -Inlet | 1 |
| 22***33 | Valve Group-Control; -Accum Arms-Hf, Lo/Hi Flow-Hp-Grapple-Hf, High Flow-Hp | 2 |
| 22***35 | Valve Group-Control; -Swing | 1 |
338-1089 Valve Gp-Main Control
| 22***33 | Valve Group-Control; -Accum Arms-Hf, Lo/Hi Flow-Hp-Grapple-Hf, High Flow-Hp | 2 |
| 22***35 | Valve Group-Control; -Swing | 1 |
| 22***37 | Valve Group-Control; -Felling Head Lateral Tilt | 1 |
270-3521 Valve Gp-Pump Control -Pressure Compensator-Main Hydraulic
| 08***59 | Setscrew | 2 |
| 12***79 | Piston | 2 |
| 12***81 | Seat | 2 |
308-4489 Valve Gp-Pump Control -Pressure Compensator-Main Hydraulic
| 08***59 | Setscrew | 2 |
| 12***79 | Piston | 2 |
| 12***81 | Seat | 2 |
198-3811 Valve Gp-Pump Control -Pressure Compensator-Main Hydraulic
| 12***94 | Plug; (Break Off) | 5 |
| 12***17 | Plug | 1 |
| 15***85 | Dowel | 2 |
319-7774 Valve Gp-Regeneration
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 4 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 2 |
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 12 |
184-3830 Valve Gp-Relief -Swing Motor
| 09***98 | Seal-O-Ring (Id=29.40mm) | 1 |
| 16***13 | Body As | 1 |
| 16***63 | Retainer | 1 |
167-1555 Valve Gp-Selector & Press Cont -Boom
| 10***66 | Adapter | 2 |
| 16***55 | Valve Group-Selector & Press Cont; -Pilot Oil Pressure | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 2 |
276-9072 Valve Gp-Shuttle
| 12***98 | Seat | 1 |
| 12***99 | Seat | 1 |
| 13***49 | Connector | 1 |
171-3685 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 11***43 | Locknut; (5/16-18-Thd) | 2 |
| 16***71 | Kit-Seal; (Solenoid Valve) | 1 |
152-8340 Valve Gp-Solenoid -Ride Control
| 11***43 | Locknut; (5/16-18-Thd) | 2 |
| 15***38 | Cartridge Assem. | 1 |
| 15***40 | Valve Group-Solenoid; -Reversing Fan, Ride Control | 1 |
195-3739 Valve Gp-Solenoid -Pump Control
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
| 17***92 | Kit-Seal; (Solenoid Valve) | 1 |
| 19***39 | Valve Group-Solenoid; -Pressure Reducing | 1 |
277-8876 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***70 | Nut; (1/2-20-2b-Thd) | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
3e-9205 Valve Gp-Solenoid
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***48 | Kit-Seal; (Solenoid Valve) | 1 |
| 15***84 | Locknut; (Special) (5/8-18 Thd) | 1 |
116-3526 Valve Gp-Solenoid
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 11***26 | Valve Group-Solenoid; -Swing Cushion | 1 |
| 12***14 | Seal-O-Ring (Id=10.82mm) | 1 |
315-4412 Valve Gp-Solenoid
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 12***14 | Seal-O-Ring (Id=10.82mm) | 1 |
| 12***15 | Seal-O-Ring (Id=12.42mm) | 1 |
196-5862 Valve Gp-Solenoid & Manifold -Pump Torque Limiter Control
| 12***27 | Manifold | 1 |
| 19***39 | Valve Group-Solenoid; -Pressure Reducing | 1 |
| 19***62 | Valve Group-Solenoid & Manifold; -Pilot Lines-Proportional Reducing | 1 |
274-8742 Valve Gp-Solenoid & Manifold -Pilot Oil-Reversing Fan
| 15***40 | Valve Group-Solenoid; -Reversing Fan, Ride Control | 3 |
| 27***42 | Valve Group-Solenoid & Manifold; -Pilot Oil-Reversing Fan | 1 |
| 27***76 | Valve Group-Solenoid; -Reversing Fan 1 | 1 |
279-6518 Valve Gp-Solenoid & Manifold -Pilot Oil-Reversing Fan
| 24***81 | Flange | 6 |
| 25***37 | Valve Group-Solenoid | 5 |
| 27***17 | Valve Group-Solenoid; (Reversing Fan 1) | 1 |
222-5781 Valve Gp-Solenoid & Manifold -Disc Saw
| 17***85 | Valve Group-Solenoid | 1 |
| 22***81 | Valve Group-Solenoid & Manifold; -Disc Saw | 1 |
| 22***64 | Cartridge As-Valve | 2 |
158-9090 Valve Gp-Swing Cushion -Fine Swing
| 09***76 | Seal-O-Ring | 1 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***98 | Seal-O-Ring (Id=29.40mm) | 2 |
322-8716 Valve Gp-Swing Cushion
| 09***76 | Seal-O-Ring | 1 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***98 | Seal-O-Ring (Id=29.40mm) | 2 |
Implements
226-5001 Boom Gp
| 09***83 | Shim (1.0 mm Thick) | 2 |
| 09***90 | Shim (1.0 mm Thick) | 2 |
| 09***15 | Shim (2.0 mm Thick) | 2 |
212-8011 Boom Gp
| 09***83 | Shim (1.0 mm Thick) | 2 |
| 09***90 | Shim (1.0 mm Thick) | 2 |
| 09***15 | Shim (2.0 mm Thick) | 2 |
218-1918 Lines Gp-Grease -Boom
| 21***18 | Lines Group-Grease; -Boom | 1 |
| 24***33 | Hose As | 1 |
| 24***34 | Hose As | 1 |
253-2605 Lines Gp-Grease -Boom, Stick
| 24***35 | Hose As | 1 |
| 24***36 | Hose As | 2 |
| 25***05 | Lines Group-Grease; -Boom, Stick | 1 |
218-1917 Lines Gp-Grease -Boom, Stick
| 21***17 | Lines Group-Grease; -Boom, Stick | 1 |
| 21***18 | Lines Group-Grease; -Boom | 1 |
| 24***37 | Hose As | 2 |
212-8010 Linkage Ar-Felling Head
| 21***10 | Linkage Ar-Felling Head | 1 |
| 21***11 | Boom Group | 1 |
| 21***12 | Stick Group; -Felling Head | 1 |
282-3069 Linkage Ar-Felling Head
| 21***11 | Boom Group | 1 |
| 21***12 | Stick Group; -Felling Head | 1 |
| 21***14 | Linkage Group-Felling Head | 1 |
252-8713 Linkage Ar-Harvester Head
| 21***97 | Valve & Mtg Group-Main Control; -7-Bank | 1 |
| 21***00 | Pump & Mtg Group-Main Hydraulic; -Felling Head | 1 |
| 22***71 | Control & Mtg Group-Joystick; -Harvester Head | 1 |
282-3012 Linkage Ar-Harvester Head
| 22***01 | Boom Group | 1 |
| 22***02 | Stick Group; -Harvester Head | 1 |
| 25***02 | Lines Group-Stick | 1 |
284-5617 Linkage Ar-Intermittent Saw
| 12***37 | Clip-Loop | 2 |
| 14***34 | Bolt; (M10x1.5x30-mm) | 1 |
| 21***11 | Boom Group | 1 |
252-8717 Linkage Ar-Intermittent Saw
| 21***11 | Boom Group | 1 |
| 21***12 | Stick Group; -Felling Head | 1 |
| 21***14 | Linkage Group-Felling Head | 1 |
212-8014 Linkage Gp-Felling Head
| 09***83 | Shim (1.0 mm Thick) | 2 |
| 09***86 | Shim (1.0mm Thick) | 2 |
| 09***15 | Shim (2.0 mm Thick) | 2 |
226-5002 Stick Gp -Harvester Head
| 09***83 | Shim (1.0 mm Thick) | 2 |
| 09***15 | Shim (2.0 mm Thick) | 2 |
| 10***57 | Washer; (22x76.2x6-mm Thk) | 1 |
212-8012 Stick Gp -Felling Head
| 09***83 | Shim (1.0 mm Thick) | 4 |
| 09***15 | Shim (2.0 mm Thick) | 4 |
| 09***34 | Shim; (T=69.85mm) | 2 |
Lubrication System
226-3560 Filler Gp-Engine Oil
| 13***19 | Seal-Integral; (Integral) | 1 |
| 22***60 | Filler Group-Engine Oil | 1 |
| 22***65 | Tube As | 1 |
220-1998 Filter Gp-Engine Oil
| 03***53 | Seal-O-Ring; (08.92mm Id) | 1 |
| 03***42 | Seal-O-Ring; (11.89mm Id) | 2 |
| 14***64 | Stud; (M8x1.25x35-mm) | 1 |
226-3559 Fumes Disposal Gp
| 22***18 | Bracket | 1 |
| 22***34 | Hose-Fumes Disposal | 1 |
| 22***59 | Fumes Disposal Group | 1 |
219-9960 Gauge Gp-Oil Level (Dipstick) -Engine
| 18***16 | Tube As-Guide; (Rh) | 1 |
| 21***59 | Gauge-Oil Level (Dipstick); (Engine) | 1 |
| 21***60 | Gauge Group-Oil Level (Dipstick); -Engine | 1 |
202-6603 Lines Gp-Engine Oil
| 03***34 | Seal-O-Ring | 1 |
| 19***52 | Gasket | 1 |
| 20***03 | Lines Group-Engine Oil | 1 |
165-4465 Lines Gp-Turbocharger Oil
| 16***65 | Lines Group-Turbocharger Oil | 1 |
| 18***99 | Connector As | 1 |
| 18***04 | Elbow As; (90 Degree) | 1 |
195-8098 Pump Gp-Engine Oil
| 19***98 | Pump Group-Engine Oil; (Engine Oil) | 1 |
| 21***22 | Pump As-Engine Oil | 1 |
| 21***46 | Gerotor Pump Group | 1 |
Machine Arrangement
272-0051 Chassis Ar
| 21***68 | Lines Group-Fuel | 1 |
| 23***12 | Step Group | 1 |
| 26***89 | Guard Group-Lighting | 1 |
319-6600 Cold Weather Ar
| 11***22 | Battery Group; (12-Volt, Maintenance Free, Wet) | 2 |
| 12***73 | Cap As-Filler; (Battery) | 6 |
| 31***52 | Battery & Wiring Group | 1 |
272-0050 Common Ar
| 21***00 | Installation Ar-Engine | 1 |
| 21***60 | Cooling Ar | 1 |
| 21***84 | Undercarriage Ar; -Tilting | 1 |
242-5335 Conversion Ar-Machine -Without Front Linkage
| 21***97 | Valve & Mtg Group-Main Control; -7-Bank | 1 |
| 21***00 | Pump & Mtg Group-Main Hydraulic; -Felling Head | 1 |
| 24***35 | Conversion Ar-Machine; -Without Front Linkage | 1 |
Operator Station
245-7889 Adjuster Gp-Seat -Upper Slide
| 24***89 | Adjuster Group-Seat; -Upper Slide | 1 |
| 24***97 | Plate | 8 |
| 24***99 | Screw-Button Head; (M8x1.25x30-mm) | 4 |
245-7896 Adjuster Gp-Seat -Lower Slide
| 19***99 | Screw-Button Head; (M8x1.25x20-mm) | 2 |
| 24***86 | Plate | 2 |
| 24***96 | Adjuster Group-Seat; -Lower Slide | 1 |
243-6303 Air Conditioner & Mounting Gp
| 11***48 | Filter Element-Cab Air; (Standard Efficiency) | 1 |
| 24***03 | Air Conditioner & Mounting Group | 1 |
| 24***04 | Air Conditioner Group | 1 |
243-6304 Air Conditioner Gp
| 17***63 | Duct As | 1 |
| 19***05 | Gasket | 1 |
| 24***04 | Air Conditioner Group | 1 |
238-1027 Air Conditioner Gp
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***93 | Plate; (Instruction) (On Right Side Behind Cab Door) | 1 |
| 16***43 | Timer As-On Delay; (24-Volt)(Compressor Cycle Limiter) | 1 |
250-0398 Air Conditioner Gp
| 03***38 | Clamp | 1 |
| 13***14 | Grommet | 1 |
| 17***87 | Coil As-Heater | 1 |
234-6607 Armrest Gp -Lh
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 18***86 | Screw-Machine; (M4x0.7x8-mm) | 2 |
| 23***07 | Armrest Group; -Lh | 1 |
259-7346 Armrest Gp -Rh
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 18***86 | Screw-Machine; (M4x0.7x8-mm) | 2 |
| 23***51 | Support As | 1 |
234-6606 Armrest Gp -Rh
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 18***86 | Screw-Machine; (M4x0.7x8-mm) | 2 |
| 23***06 | Armrest Group; -Rh | 1 |
259-7347 Armrest Gp -Lh
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 18***86 | Screw-Machine; (M4x0.7x8-mm) | 2 |
| 23***52 | Support As | 1 |
320-7458 Cab Gp-Enclosed Rops
| 25***97 | Insert-Threaded | 2 |
| 28***79 | Door Group-Cab | 1 |
| 29***67 | Door Group-Access; -Cab Roof | 1 |
238-5010 Cab Gp-Enclosed Rops
| 23***74 | Door Group-Access; -Air Filter | 1 |
| 23***10 | Cab Group-Enclosed Rops | 1 |
| 23***12 | Door Group-Cab | 1 |
320-7457 Cab Gp-Enclosed Rops
| 19***80 | Guard Group-Window | 1 |
| 23***60 | Plate | 1 |
| 25***94 | Hatch Group-Roof | 1 |
282-2696 Cab Gp-Enclosed Rops
| 23***74 | Door Group-Access; -Air Filter | 1 |
| 25***97 | Insert-Threaded | 2 |
| 28***79 | Door Group-Cab | 1 |
282-2697 Cab Gp-Enclosed Rops
| 23***60 | Plate | 1 |
| 25***94 | Hatch Group-Roof | 1 |
| 26***93 | Window Group-Cab; -Front | 1 |
238-5013 Cab Gp-Enclosed Rops
| 23***60 | Plate | 1 |
| 23***08 | Window Group-Cab; -Side | 1 |
| 23***10 | Cab Group-Enclosed Rops | 1 |
246-7154 Case Gp-Air Conditioner
| 10***74 | Seal-Connector | 10 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
226-3561 Compressor Gp-Refrigerant
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***00 | Clip; (Tab) | 1 |
| 13***89 | Clip; (Ladder) | 1 |
259-7349 Console Gp-Operator -Lh
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 5 |
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 23***79 | Nut-Speed | 6 |
243-5686 Console Gp-Operator
| 18***84 | Cover | 1 |
| 24***86 | Console Group-Operator | 1 |
| 24***23 | Console Group-Operator; -Lh | 1 |
259-7348 Console Gp-Operator -Rh
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 4 |
| 18***84 | Cover | 1 |
| 23***79 | Nut-Speed | 2 |
245-7923 Console Gp-Operator -Lh
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 5 |
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 17***30 | Ashtray | 1 |
245-7924 Console Gp-Operator -Rh
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 4 |
| 18***84 | Cover | 1 |
| 23***79 | Nut-Speed | 2 |
224-4990 Control & Mtg Gp-Joystick -Felling Head
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 5 |
| 22***39 | Control Group-Hydraulic Pedal; (Travel) | 2 |
223-0671 Control & Mtg Gp-Joystick -Harvester Head
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 22***39 | Control Group-Hydraulic Pedal; (Travel) | 2 |
| 22***71 | Control & Mtg Group-Joystick; -Harvester Head | 1 |
238-8167 Control & Mtg Gp-Pedal
| 23***13 | Control Group-Hydraulic Pedal | 1 |
| 23***67 | Control & Mtg Group-Pedal | 1 |
| 23***22 | Plate As | 1 |
223-0715 Control Gp-Handle -Harvester Head, Lh
| 10***51 | Loom; (39 cm) | 0 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 17***08 | Switch As-Limit | 10 |
235-4122 Control Gp-Handle -Felling Head
| 17***08 | Switch As-Limit | 8 |
| 23***22 | Control Group-Handle; -Felling Head | 1 |
| 26***01 | Film-Overlay; (6-Button, 11.5-mm) | 1 |
223-0716 Control Gp-Handle -Harvester Head, Rh
| 10***51 | Loom; (39 cm) | 0 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 17***08 | Switch As-Limit | 10 |
231-2613 Control Gp-Hydraulic Pedal
| 11***49 | Pedal Assem.; (L.H.) | 1 |
| 11***50 | Pedal Assem.; (R.H.) | 1 |
| 11***56 | Step Assem. | 2 |
283-2394 Control Gp-Joystick -Harvester Head, Lh
| 22***15 | Control Group-Handle; -Harvester Head, Lh | 1 |
| 22***17 | Harness As-Operator Controls; (Joystick) | 1 |
| 22***63 | Tab | 2 |
272-7089 Control Gp-Joystick -Harvester Head, Rh
| 22***16 | Control Group-Handle; -Harvester Head, Rh | 1 |
| 22***17 | Harness As-Operator Controls; (Joystick) | 1 |
| 27***89 | Control Group-Joystick; -Harvester Head, Rh | 1 |
283-2395 Control Gp-Joystick -Harvester Head, Rh
| 22***16 | Control Group-Handle; -Harvester Head, Rh | 1 |
| 22***17 | Harness As-Operator Controls; (Joystick) | 1 |
| 28***95 | Control Group-Joystick; -Harvester Head, Rh | 1 |
283-2393 Control Gp-Joystick -Felling Head
| 22***17 | Harness As-Operator Controls; (Joystick) | 1 |
| 23***22 | Control Group-Handle; -Felling Head | 1 |
| 28***93 | Control Group-Joystick; -Felling Head | 1 |
272-7088 Control Gp-Joystick -Harvester Head, Lh
| 22***15 | Control Group-Handle; -Harvester Head, Lh | 1 |
| 22***17 | Harness As-Operator Controls; (Joystick) | 1 |
| 27***88 | Control Group-Joystick; -Harvester Head, Lh | 1 |
272-0446 Control Gp-Monitor -Iqan
| 13***92 | Retainer-Captive | 2 |
| 17***33 | Lamp; (Red) | 1 |
| 17***31 | Screw; (Truss Head) (M4x0.7x12mm) | 2 |
319-6719 Control Gp-Monitor -Iqan
| 13***92 | Retainer-Captive | 2 |
| 17***33 | Lamp; (Red) | 1 |
| 17***31 | Screw; (Truss Head) (M4x0.7x12mm) | 2 |
256-7304 Door Gp-Access -Cab Roof
| 13***02 | Washer-Nylon; (0.53x1.53x0.125-In Thk) | 2 |
| 16***49 | Bolt; (M12x1.75x60-mm) | 4 |
| 21***29 | Block | 2 |
320-7459 Door Gp-Access -Cab Air Filter
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 2 |
| 20***05 | Latch As | 1 |
| 32***59 | Door Group-Access; -Cab Air Filter | 1 |
237-2374 Door Gp-Access -Air Filter
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 2 |
| 20***05 | Latch As | 1 |
| 23***74 | Door Group-Access; -Air Filter | 1 |
298-1567 Door Gp-Access -Cab Roof
| 27***33 | Seal-Washer | 6 |
| 28***70 | Knob | 4 |
| 28***53 | Seal; (26-Dm Each) | 0 |
256-1296 Door Gp-Access -Cab Roof
| 12***28 | Seal; (17.2-cm Each) | 0 |
| 25***81 | Door As-Access; (Cab Roof) | 1 |
| 25***82 | Window | 1 |
282-2679 Door Gp-Cab
| 11***10 | Stud-Ball | 2 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 8 |
| 14***06 | Fastener | 15 |
238-5012 Door Gp-Cab
| 11***10 | Stud-Ball | 2 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 8 |
| 14***06 | Fastener | 15 |
239-1378 Duct Gp-Cab Air
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 2 |
| 11***48 | Filter Element-Cab Air; (Standard Efficiency) | 1 |
| 16***74 | Louver As-Vent | 10 |
250-0861 Frame Gp-Window
| 24***37 | Angle As | 2 |
| 24***38 | Angle As | 1 |
| 24***39 | Angle As | 1 |
298-8355 Frame Gp-Window
| 24***37 | Angle As | 1 |
| 24***43 | Angle As | 1 |
| 24***44 | Angle As | 1 |
321-3821 Frame Gp-Window
| 31***17 | Plate | 2 |
| 31***18 | Plate | 1 |
| 31***19 | Plate | 1 |
258-0699 Frame Gp-Window -Thick Glass
| 25***48 | Window; (Center) | 1 |
| 25***50 | Window; (Left) | 1 |
| 25***66 | Angle As | 1 |
197-9880 Guard Gp-Window
| 19***80 | Guard Group-Window | 1 |
| 19***90 | Angle | 1 |
| 19***91 | Guard As | 1 |
253-9594 Hatch Gp-Roof
| 12***28 | Seal; (17.2-cm Each) | 0 |
| 25***04 | Window-Roof; (Cab) | 1 |
| 25***09 | Bar | 1 |
323-2220 Hatch Gp-Roof
| 28***53 | Seal; (26-Dm Each) | 0 |
| 32***16 | Seal-Washer | 2 |
| 32***20 | Hatch Group-Roof | 1 |
251-6761 Housing Gp-Air Conditioner -Outlet Air
| 17***12 | Cover | 1 |
| 17***13 | Housing | 1 |
| 17***27 | Actuator | 1 |
238-5024 Installation Gp-Radio
| 10***55 | Cover-Speaker | 2 |
| 11***19 | Bolt-Socket Head; (M4x0.7x25-mm) | 8 |
| 11***54 | Cover | 1 |
325-8562 Liner Gp-Cab
| 26***61 | Foam | 1 |
| 26***62 | Foam | 1 |
| 26***63 | Foam | 1 |
302-7455 Liner Gp-Cab
| 26***61 | Foam | 1 |
| 26***62 | Foam | 1 |
| 26***63 | Foam | 1 |
263-2766 Liner Gp-Cab
| 25***25 | Foam | 1 |
| 26***60 | Foam | 1 |
| 26***61 | Foam | 1 |
261-1090 Lines Gp-Air Conditioner
| 12***98 | Bracket Assem. | 1 |
| 14***35 | Clip | 1 |
| 16***73 | Valve Group-Shutoff | 2 |
251-6137 Mounting Gp-Cab
| 11***31 | Mount Assem. | 8 |
| 24***98 | Sleeve | 8 |
| 24***39 | Washer; (32x135x12-mm Thk) | 6 |
282-2698 Operator Ar
| 22***90 | Control & Mtg Group-Joystick; -Felling Head | 1 |
| 23***56 | Support Group-Seat | 1 |
| 23***27 | Air Conditioner Group | 1 |
238-5004 Operator Ar
| 22***90 | Control & Mtg Group-Joystick; -Felling Head | 1 |
| 23***56 | Support Group-Seat | 1 |
| 23***27 | Air Conditioner Group | 1 |
238-5020 Platform Gp-Operator
| 12***67 | Screw; (M6x1x8-mm) | 3 |
| 13***13 | Bolt; (M10x1.5x16-mm) | 2 |
| 23***20 | Platform Group-Operator | 1 |
284-8953 Radio Gp -Am/Fm/Wb/Cd Player
| 19***54 | Sleeve | 1 |
| 28***53 | Radio Group; -Am/Fm/Wb/Cd Player | 1 |
285-2371 Radio Gp -Am/Fm Cassette, Cd Changer
| 13***90 | Bushing; (Radio Mount) | 1 |
| 14***81 | Knob-Select; (Radio) | 1 |
| 16***26 | Radio Group; (Am/Fm Cd Player) | 1 |
240-5003 Seat & Mounting Gp -High Back, Tilt
| 22***89 | Seat Group-Suspension; -High Back, Tilt | 1 |
| 24***03 | Seat & Mounting Group; -High Back, Tilt | 1 |
| 6V***02 | Bolt-Socket Head; (M8x1.25x16-mm) | 4 |
240-5061 Seat & Mounting Gp -Air Suspension
| 24***61 | Seat & Mounting Group; -Air Susp, High Back, Tilt | 1 |
| 24***62 | Seat Group-Suspension; -Air Susp, High Back, Tilt | 1 |
| 6V***02 | Bolt-Socket Head; (M8x1.25x16-mm) | 4 |
235-9020 Seat Belt Gp -Retractable, 3-In
| 23***20 | Seat Belt Group; -Retractable, 76-mm | 1 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
| 8S***23 | Bolt; (7/16-20x1.5-In) | 1 |
240-5039 Seat Belt Gp
| 23***20 | Seat Belt Group; -Retractable, 76-mm | 1 |
| 24***39 | Seat Belt Group; -Retractable, 76-mm | 1 |
242-3122 Seat Gp -High Back, Tilt
| 23***20 | Seat Belt Group; -Retractable, 76-mm | 1 |
| 24***03 | Seat & Mounting Group; -High Back, Tilt | 1 |
| 24***22 | Seat Group; -High Back, Tilt | 1 |
229-9090 Seat Gp -High Back, Tilt
| 17***59 | Handle; (Lumbar Support Adjuster) | 1 |
| 22***90 | Seat Group; -High Back, Tilt | 1 |
| 22***94 | Headrest As-Seat; -Cloth | 1 |
229-9089 Seat Gp-Suspension -High Back, Tilt
| 22***77 | Suspension Group-Seat; -Mechanical | 1 |
| 22***89 | Seat Group-Suspension; -High Back, Tilt | 1 |
| 22***90 | Seat Group; -High Back, Tilt | 1 |
240-5062 Seat Gp-Suspension -Air
| 22***90 | Seat Group; -High Back, Tilt | 1 |
| 24***62 | Seat Group-Suspension; -Air Susp, High Back, Tilt | 1 |
| 24***63 | Protector, Suspension Group-Seat; -Air | 1 |
235-8856 Support Gp-Seat
| 23***56 | Support Group-Seat | 1 |
| 23***57 | Support As | 1 |
| 7X***29 | Washer; (11x25x3-mm Thk) | 4 |
229-9077 Suspension Gp-Seat
| 14***21 | Kit-Clip; (Seat) | 1 |
| 22***77 | Suspension Group-Seat; -Mechanical | 1 |
| 24***68 | Cover As | 1 |
273-5384 Suspension Gp-Seat -Air
| 19***99 | Screw-Button Head; (M8x1.25x20-mm) | 2 |
| 20***48 | Absorber As-Shock; (Sideshift) | 1 |
| 24***97 | Plate | 8 |
240-5063 Suspension Gp-Seat -Air
| 24***63 | Protector, Suspension Group-Seat; -Air | 1 |
| 24***68 | Cover As | 1 |
| 24***89 | Adjuster Group-Seat; -Upper Slide | 1 |
245-7892 Suspension Gp-Seat
| 19***99 | Screw-Button Head; (M8x1.25x20-mm) | 2 |
| 20***80 | Cylinder-Damper | 1 |
| 24***92 | Suspension Group-Seat; -Mechanical | 1 |
299-5611 Trim Gp-Cab
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 4 |
| 22***64 | Handle As | 1 |
| 23***73 | Cover-Front; (Upper, Rh) | 1 |
238-5025 Trim Gp-Cab
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 4 |
| 20***61 | Hose As | 1 |
| 22***64 | Handle As | 1 |
320-7473 Trim Gp-Cab
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 4 |
| 22***64 | Handle As | 1 |
| 23***73 | Cover-Front; (Upper, Rh) | 1 |
266-3093 Window Gp-Cab -Front
| 24***34 | Plate | 2 |
| 24***35 | Plate | 1 |
| 25***42 | Angle As | 1 |
317-3155 Window Gp-Cab -Lh
| 09***49 | Bolt; (M8x1.25x40-mm) | 19 |
| 19***92 | Window Group-Cab; -Lh | 1 |
| 19***90 | Angle | 1 |
313-3545 Window Gp-Cab -Lh
| 09***49 | Bolt; (M8x1.25x40-mm) | 19 |
| 19***92 | Window Group-Cab; -Lh | 1 |
| 19***90 | Angle | 1 |
238-5008 Window Gp-Cab -Side
| 23***07 | Window; (Rear) | 1 |
| 23***49 | Window; (Right Side, Front) | 1 |
| 23***53 | Window; (Rear Quarter, Left Side) | 2 |
299-9541 Window Gp-Cab
| 23***49 | Window; (Right Side, Front) | 1 |
| 23***54 | Window; (Rear Side) | 1 |
| 23***86 | Window; (Left Side, Front, Upper) | 1 |
321-3822 Window Gp-Cab
| 19***92 | Window Group-Cab; -Lh | 1 |
| 23***86 | Window; (Left Side, Front, Upper) | 1 |
| 23***87 | Window; (Left Side, Front, Lower) | 1 |
196-2392 Window Gp-Cab -Lh
| 13***30 | Hinge-Lh | 2 |
| 15***15 | Gasket | 1 |
| 19***87 | Frame As-Lower | 1 |
Power Train
236-6675 Drive Gp-Final
| 09***29 | Ring; (Retaining) | 5 |
| 09***44 | Ring-Retaining | 5 |
| 13***41 | Washer | 1 |
318-9123 Drive Gp-Final
| 23***75 | Drive Group-Final | 1 |
| 31***23 | Drive Group-Final | 1 |
| 32***94 | Motor Group-Travel | 1 |
279-9871 Final Drive Gp
| 23***75 | Drive Group-Final | 1 |
| 27***71 | Final Drive Group | 1 |
| 27***74 | Motor Group-Travel | 1 |
7y-0763 Sprocket Gp -2 Required
| 6Y***85 | Sprocket; (Track) | 1 |
| 7X***75 | Bolt; (M24x3x60-mm) | 16 |
| 7Y***63 | Sprocket Group | 1 |
Service Equipment And Supplies
233-8140 Film Gp
| 17***03 | Film-Identification; (300-Ft) | 2 |
| 22***17 | Film; (Warning) (Seatbelt) (On Lh Post Inside Cab) | 1 |
| 22***42 | Film-Warning; (Trip Point) | 1 |
269-5490 Film-Instruction -Joystick Control, Pattern 5
| 26***90 | Film-Instruction; -Joystick Control, Pattern 5 | 1 |
279-3454 Film-Instruction -Joystick Control, Pattern 4
| 27***54 | Film-Instruction; -Joystick Control, Pattern 4 | 1 |
279-3457 Film-Instruction -Joystick Control, Pattern 7
| 27***57 | Film-Instruction; -Joystick Control, Pattern 7 | 1 |
279-3452 Film-Instruction -Joystick Control, Pattern 2
| 27***52 | Film-Instruction; -Joystick Control, Pattern 2 | 1 |
259-1068 Film-Instruction -Joystick Control, Pattern 1
| 25***68 | Film-Instruction; -Joystick Control, Pattern 1 | 1 |
269-5775 Film-Instruction -Joystick Control, Pattern 2
| 26***75 | Film-Instruction; -Joystick Control, Pattern 2 | 1 |
279-3456 Film-Instruction -Joystick Control, Pattern 6
| 27***56 | Film-Instruction; -Joystick Control, Pattern 6 | 1 |
269-5492 Film-Instruction -Joystick Control, Pattern 7
| 26***92 | Film-Instruction; -Joystick Control, Pattern 7 | 1 |
279-3455 Film-Instruction -Joystick Control, Pattern 5
| 27***55 | Film-Instruction; -Joystick Control, Pattern 5 | 1 |
269-5491 Film-Instruction -Joystick Control, Pattern 6
| 26***91 | Film-Instruction; -Joystick Control, Pattern 6 | 1 |
269-5488 Film-Instruction -Joystick Control, Pattern 3
| 26***88 | Film-Instruction; -Joystick Control, Pattern 3 | 1 |
269-5489 Film-Instruction -Joystick Control, Pattern 4
| 26***89 | Film-Instruction; -Joystick Control, Pattern 4 | 1 |
279-3453 Film-Instruction -Joystick Control, Pattern 3
| 27***53 | Film-Instruction; -Joystick Control, Pattern 3 | 1 |
286-9992 Plate & Film Gp
| 22***40 | Film; (Warning) (Crush) (On Each Side Face Of Non Engine End Frame) | 3 |
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
| 25***61 | Film-Information; (Cat Power, Acert Technology) | 2 |
285-5316 Plate & Film Gp
| 11***95 | Film-Instruction; (Air Conditioner) | 1 |
| 12***80 | Film-Instruction; (Hydraulic Tank Oil Drain) | 1 |
| 13***59 | Plate-Identification; (Engine Stop, Run) | 1 |
Undercarriage
297-9152 Adjustment Gp-Hydraulic Track
| 09***09 | Ring-Back Up; (Backup) | 2 |
| 09***27 | Valve-Fill; (Track Tension Cylinder) | 1 |
| 19***53 | Seal; (Wiper) | 1 |
236-1883 Fastener Gp-Carbody
| 19***00 | Bolt-12 Point Head | 8 |
| 22***89 | Spacer; (31.75x60x76.2-mm Thk) | 20 |
| 22***90 | Spacer | 4 |
224-9641 Frame Gp-Track Roller
| 22***41 | Frame Group-Track Roller | 1 |
| 22***68 | Frame As; (Rh) | 1 |
| 22***69 | Frame As; (Lh) | 1 |
152-8569 Guard Gp-Track Guide
| 12***34 | Bolt; (M24x3x340-mm) | 16 |
| 15***55 | Spacer | 16 |
| 15***69 | Guard Group-Track Guide | 1 |
190-5406 Guard Gp-Travel Motor
| 19***04 | Cover | 2 |
| 19***06 | Washer, Guard Group-Travel Motor | 1 |
| 8T***84 | Capscrew; (Hex Hd) (M12 X 1.75 X 45l Gr 10.9) | 16 |
152-8559 Idler Gp-Front
| 09***80 | Setscrew; (Socket) (M16x2x20mm) | 4 |
| 15***59 | Idler Group-Front | 1 |
| 15***61 | Idler Group-Front | 2 |
152-8561 Idler Gp-Front
| 10***52 | Idler Group-Front | 1 |
| 15***61 | Idler Group-Front | 1 |
| 15***62 | Spring Group-Recoil | 1 |
102-8152 Idler Gp-Front
| 10***52 | Idler Group-Front | 1 |
| 10***81 | Seal Group-Duo-Cone | 2 |
| 11***47 | Idler & Bearing As | 1 |
213-1975 Link As-Track -Grease Lubricated Track
| 17***26 | Seal; (Track) | 92 |
| 17***28 | Seal-Track Master | 2 |
| 20***28 | Bushing-Track Master | 1 |
336-7735 Roller Ar-Track -Carrier Roller
| 24***65 | Roller Group-Track-Single Flange | 4 |
| 33***35 | Roller Ar-Track; -Carrier Roller | 1 |
| 7X***65 | Bolt; (M20x2.5x100-mm) | 16 |
336-7738 Roller Ar-Track -Star
| 22***05 | Roller Group-Track | 4 |
| 33***38 | Roller Ar-Track; -Star | 1 |
| 7X***54 | Bolt; (M24x3.0x110mm) | 16 |
224-9642 Roller Ar-Track & Carrier
| 18***79 | Roller Group-Track-Double Flange | 18 |
| 22***42 | Roller Ar-Track & Carrier | 1 |
| 7X***54 | Bolt; (M24x3.0x110mm) | 72 |
228-6405 Roller Gp-Track
| 18***74 | Roller Group-Track-Single Flange | 1 |
| 22***05 | Roller Group-Track | 1 |
183-2879 Roller Gp-Track-Double Flange
| 14***33 | Seal Group-Duo Cone; (Duo Cone) (151page) | 2 |
| 17***97 | Collar; (Track Roller) | 2 |
| 17***99 | Dowel | 2 |
247-0565 Roller Gp-Track-Single Flange
| 15***86 | Collar; (Track Roller) | 2 |
| 15***96 | Ring; (Retaining) | 2 |
| 15***26 | Dowel | 1 |
183-2874 Roller Gp-Track-Single Flange
| 14***33 | Seal Group-Duo Cone; (Duo Cone) (151page) | 2 |
| 16***31 | Ring; (Toric) | 2 |
| 17***97 | Collar; (Track Roller) | 2 |
152-8562 Spring Gp-Recoil
| 10***20 | Support | 1 |
| 11***00 | Spring | 1 |
| 11***02 | Support As | 1 |
219-1357 Tilt Gp-Cab Leveling
| 10***57 | Washer; (22x76.2x6-mm Thk) | 1 |
| 12***78 | Washer; (25.5x85x12-mm Thk) | 4 |
| 16***49 | Bolt; (M12x1.75x60-mm) | 1 |
7y-1635 Adjustment Gp-Hydraulic Track
| 09***09 | Ring-Back Up; (Backup) | 2 |
| 09***27 | Valve-Fill; (Track Tension Cylinder) | 1 |
| 19***53 | Seal; (Wiper) | 1 |
188-9778 Track Gp
| 14***91 | Bolt-Track; (M22x1.5x73-mm) | 188 |
| 15***58 | Shoe-Track | 47 |
| 18***78 | Track Group | 1 |
152-1734 Track Gp
| 14***91 | Bolt-Track; (M22x1.5x73-mm) | 188 |
| 15***34 | Track Group | 1 |
| 21***75 | Link As-Track; -Grease Lubricated Track | 1 |
224-9043 Undercarriage Ar
| 15***59 | Idler Group-Front | 1 |
| 15***69 | Guard Group-Track Guide | 1 |
| 19***06 | Washer, Guard Group-Travel Motor | 1 |
219-4808 Undercarriage Ar
| 18***78 | Track Group | 2 |
| 21***08 | Undercarriage Ar | 1 |
239-1305 Undercarriage Ar
| 15***34 | Track Group | 2 |
| 23***05 | Undercarriage Ar | 1 |
219-4784 Undercarriage Ar -Tilting
| 21***57 | Tilt Group-Cab Leveling | 1 |
| 21***84 | Undercarriage Ar; -Tilting | 1 |
| 22***37 | Cylinder & Lines Group-Tilt; -Cab Leveling | 1 |
532 serial number reference
On the Cat 532 track feller buncher/harvester the PIN plate is riveted to the main frame at the base of the operator's cab, driver's side, readable from ground level; some units carry a duplicate tag inside the cab door frame. The plate shows an 8-character serial: the first 3 characters are the alphanumeric prefix tied to model/build series, the last 5 are the sequential unit number. On machines built 2001 and later this same 8-character string is embedded as the last 8 characters of the full 17-character PIN.
| Prefix | Identifies | Notes |
|---|---|---|
| 532 | Track Feller Buncher / Track Harvester, ZTS (zero tail swing) platform, Cat C9 ACERT engine, part of the 511/521/522/532 family introduced 2006 | No dealer or OEM serial-prefix table lists a genuine 3-character alphanumeric PIN prefix specific to this model. The only prefix-shaped reference found is a single aftermarket turbo listing using "Prefix 532" as a fitment tag, which just echoes the model number rather than a real Cat PIN prefix and does not match Caterpillar's standard PIN-prefix format. Treat this as unconfirmed. Read the PIN plate directly or confirm the exact prefix with a Cat dealer before ordering parts by prefix. |
Frequently asked questions
What engine does the Caterpillar 532 use?
The Cat 532 runs a Cat C9 ACERT diesel meeting Tier 2 emissions standards, rated around 284 hp (212 kW) gross and roughly 263 hp (196 kW) net output.
What is the operating weight of the Caterpillar 532?
Operating weight without a felling or processing attachment runs approximately 69,300-69,700 lb (31,400-31,600 kg). Exact figures vary by track gauge and configuration — verify against the build sheet for a specific unit.
What replaced the Caterpillar 532?
Caterpillar does not show a direct one-for-one "532B" nameplate. The carrier's tilting ZTS role was carried forward by later B-series machines such as the 521B/522B, alongside Cat's broader fixed-swing feller buncher and harvester range that covers the same weight and reach class. Confirm current equivalents with a Cat forestry dealer.
What 532 owners discuss
What engine is actually in the Cat 532, and does horsepower vary by series?
The 532 track feller buncher runs the Cat C9 ACERT diesel, not a different Cat platform. Rated output varies by emissions tier/series: earlier Tier II-rated units list around 212 kW (284 hp) at 1800 rpm, while later Zero Tail Swing (ZTS) production is rated up to 226 kW (303 hp), a roughly 20 hp bump carried over from the 521B/522B update. Confirm which rating your serial number carries before comparing duty cycles or fuel burn against another 532.
What quirks show up on the C9 ACERT fuel system, and how many hours should the engine go?
The C9 ACERT uses a HEUI (hydraulically actuated electronic unit injector) fuel system that is unforgiving of contaminated fuel — dirty fuel or a neglected water separator shows up as rough running or injector failure well before the engine itself is worn out. Owners across C9 ACERT applications report turbo and injector replacements as the recurring big-ticket items, and ring wear/cylinder scoring becomes a concern once soot loading and oil change discipline slip. With clean fuel, timely filter changes, and regular oil sampling, operators report the C9 reaching close to 10,000 hours before needing a major overhaul. Any injector or turbo diagnosis should still be run through Cat ET by a dealer technician before parts are swapped.
How is the hydraulic system laid out on the 532, and what does a slow saw or sluggish boom usually mean?
The 532 (and the 521/522 ZTS siblings) uses three dedicated variable-displacement pumps rather than one shared system: about 200 cc for the travel circuit, about 190 cc for boom/stick/swing functions, and a smaller 55 cc pump feeding the felling and processing head only. Because the saw/accumulator circuit is isolated, a saw that spins down slowly or an accumulator arm that lags usually points to that small dedicated pump or its motor, not the whole hydraulic system — check that circuit's filter and pressure before condemning the main pumps. Cat's own service literature allows extending the hydraulic oil change from 2,000 to 4,000 hours only if S·O·S oil sampling is run on schedule (about every 500 hours); skipping the sampling and still stretching the interval is a common way owners end up with pump wear.
Why does the undercarriage and track hardware wear faster than on a comparable excavator?
The 532 shares its base carrier with Cat excavators but forestry duty is harder on the lower works: constant travel over stumps, roots, slash, and uneven ground accelerates wear on sprockets, rollers, idlers, and track pads compared to dirt/grade work. Cat builds the 532's carbody as a precision-welded, high-wide frame specifically to resist flexing under that abuse, and forestry-spec machines add reinforced track guards and rock guards to keep debris off the rollers. Budget for undercarriage wear items on a compressed inspection interval versus a same-size excavator, and check guard hardware isn't missing or bent — that's usually the first sign a machine was run without them.
What's the story with saw disc cracking on the felling head, and how often should it be inspected?
The 532 pairs with Cat's own disc-saw felling heads (HF-series), and disc cracking is a well-known wear pattern industry-wide on high-speed disc saws, not unique to one brand. Hairline cracks typically start at the tooth base or bolt holes after repeated rock strikes or frozen-ground impacts, and a cracked disc spinning at speed is a real failure risk — it can throw material or fail catastrophically. Operators inspect the disc and tooth pockets at the start of every shift, especially after working rocky or frozen ground, and pull the disc from service at the first sign of a crack rather than monitoring it. Any disc replacement or repair call should be verified by your dealer or a qualified forestry-equipment tech before the machine goes back to work.
What electrical or sensor issues come up most in the field on this class of machine?
The most common field complaints on Cat forestry carriers of this size are intermittent joystick or function faults traced to wiring harness connectors, not to the joystick or ECM itself. Dust, vibration, and repeated flexing in a forestry duty cycle work connectors loose and corrode contacts over time, so a function that drops out (one accumulator arm button, a tilt function, etc.) while others on the same joystick work fine usually means a damaged connector or chafed wire in that specific circuit. Owners recommend checking and cleaning harness connectors as routine preventive maintenance rather than waiting for a fault to appear.
What should I check before buying a used Cat 532?
Confirm which engine rating and series the machine actually carries (Tier II ~212 kW/284 hp versus later ZTS ~226 kW/303 hp) against the paperwork and hour meter — mismatches are a red flag for a swapped engine or altered records. Ask for S·O·S sample history to see whether the hydraulic oil interval was legitimately extended or just stretched without sampling. Cycle all three hydraulic circuits (travel, boom/swing, felling head) under load and listen for pump cavitation or slow response, especially on the saw circuit. Walk the undercarriage for wear on sprockets, rollers, idlers, and track pads, and check that rock guards and track guards are present and not bent or missing. Inspect the carbody and boom welds for cracking from repeated shock loading, check swing bearing play and grease condition, and inspect the felling head disc and accumulator arms for cracks, worn bushings, and tooth wear. Because a cracked saw disc or a compromised structural weld is a safety issue, have a dealer or qualified forestry tech verify the felling head and any suspect welds before you put the machine to work.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 532 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.