Caterpillarforest productstrack feller buncher
Caterpillar 521
Maintenance schedule, common problems & OEM parts breakdown
The Cat 521 is a track-mounted feller buncher and track harvester built for mechanized clear-cut and select-cut logging, part of Caterpillar's 511/521/522/532 forestry family. The base 521 (roughly 2006 through 2012) runs a Cat C9 ACERT engine rated 284 hp gross / 263 hp net on a tail-swing carbody with D6H HD-class undercarriage components. Caterpillar replaced it from December 2012 with the 521B, a zero-tail-swing redesign carrying the same C9 ACERT family engine bumped to 303 hp gross / 282 hp net, paired with heavier 330/D7-class undercarriage hardware. Operating weight runs roughly 26,000 to 27,500 kg (57,000 to 62,000 lb) depending on feller-buncher versus harvester configuration and felling head fitted. Cat offers the platform as a Track Feller Buncher or Track Harvester, factory-fitted with the Cat HF201B felling head in Full Tilt (330 degree) or Partial Tilt (40 degree) form, standard or auxiliary fuel tank, and Parker IQAN electro-hydraulic boom control run through an MD3 cab display.
The move from base 521 to 521B was Caterpillar's response to years of field feedback on tail-swing bunchers working tight cut blocks and rough ground: zero tail swing improved maneuverability, the larger D7-class undercarriage and roughly double the fuel and hydraulic capacity of the base machine extended shift duration and service life, and the added engine power shortened felling cycle times. Both series trace to forestry engineering Caterpillar brought in-house through its 2007 acquisition of Blount International's forestry division, which is why the 511/521/522/532 line reads as a single family rather than a one-off model. In the used and parts market this matters because the two series are not interchangeable at the undercarriage, swing drive or hydraulic-circuit level — buyers and parts counters need to confirm which series a machine is before ordering rollers, links, swing components or hydraulic hardware. High cycle counts and constant swing-and-shock loading in forestry duty make undercarriage, swing drive and felling head wear parts the highest-turnover items across both series, keeping demand steady for good used 521/521B machines and their wear components.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 521 specifications
Engine
| Engine model (521, all configurations) | Cat C9 ACERT, 6-cylinder diesel |
| Gross power (521) | 212 kW (284 hp) at 2100 rpm |
| Net/rated power (521) | 196 kW (263 hp) at 2100 rpm |
| Engine model (521B series) | Cat C9 ACERT, 6-cylinder diesel |
| Gross power (521B) | 226 kW (303 hp) at 1800 rpm |
| Rated power (521B) | 210 kW (282 hp) at 2100 rpm |
| Displacement | 8.8 L (537 cu in), all series |
| Emissions | Meets U.S. EPA Tier 2 / current emission standards depending on model year; ACERT electronic control on both series |
Weights
| Operating weight, feller buncher config (521, base series) | 27,084 kg (59,710 lb), without felling head |
| Operating weight, harvester config (521, base series) | 26,050 kg (57,440 lb), without harvesting head |
| Operating weight (521B, without head, standard counterweight) | approx. 27,000-27,500 kg (59,500-60,600 lb); factory literature gives 27,501 kg (60,629 lb) as the headline figure |
| Ground pressure | Not published in factory literature for this class; not documented |
Dimensions
| Shipping length, without attachment (521 base) | 8.64 m (340 in) |
| Shipping length, with attachment (521 base) | 10.95 m (431 in) |
| Overall width, minimum (521 base) | 3.2 m (126 in / 10.5 ft) |
| Height to top of cab (521 base) | 3.56 m (140 in / 11.67 ft) |
| Track gauge, standard | 2.59 m (102 in), both 521 and 521B; harvester config offers a widened gauge option up to 2.87 m (113 in) |
| Track length (521 base) | 4.80 m (189 in) |
| Track length (521B) | 4.86 m (191.1 in) |
| Ground clearance, feller buncher config | 70-71 mm (2.75-2.8 in) |
| Ground clearance, track/harvester config (521 base) | 838 mm (33 in) |
| Ground clearance (521B) | 889 mm (35 in) |
| Undercarriage (521 base) | D6H HD undercarriage, shoe width approx. 610 mm (24 in), pitch 203 mm (8 in) |
| Undercarriage (521B) | 330 EX (D7) undercarriage, pitch 216 mm (8.5 in) |
Performance
| Maximum boom reach without head | 8.1 m (26.5-26.6 ft), both series |
| Maximum reach with head (harvester config) | 9.8-9.9 m (32-32.2 ft) |
| Bare-pin lift capacity at max reach (521 base) | 7,100 kg (15,600 lb) at 6.1 m (20 ft) reach |
| Lift capacity at longer reach (521 base) | 4,100 kg (9,100 lb) at 9.0 m (29.5 ft) reach |
| Bare-pin lift capacity (521B) | approx. 4,000-6,100 kg (9,000-13,500 lb) depending on reach; figures vary by configuration/series |
| Tractive effort | 31,978 kg (70,500 lb), both series |
| Maximum drawbar pull (harvester config) | 30,118 kg (66,400 lb) |
| Travel speed | Not published as a numeric figure in factory literature; described as infinitely variable, with three selectable travel-speed ranges on the B-series |
| Gradeability | Not published in factory literature for this model line; verify with your dealer |
Service capacities (summary)
| Fuel tank (521 base) | 530 L (140 gal) |
| Fuel tank (521B) | 856 L (226 gal) |
| Hydraulic system, total (521 base) | 300 L (79.3 gal), of which the tank holds 262 L (69.2 gal) |
| Hydraulic system, total (521B) | 448 L (118 gal) |
| Engine oil | 39 L (10.3-10.4 gal), consistent across both series |
| Cooling system (521 base) | 61 L (16.1-16.2 gal) |
| Cooling system (521B) | 41 L (10.8 gal) |
| Swing drive | 10 L (2.6 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
521 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) - Cat C9 ACERT diesel | 39 L (10.3 US gal) | Cat DEO or DEO-ULS multigrade diesel engine oil. Grade by ambient air temperature: SAE 10W-30 in cold climates, SAE 15W-40 for general/warm service above about -9.5 C (15 F), SAE 40 in sustained hot climates. Use API CJ-4/CK-4 or Cat ECF-3 quality oil for the ACERT emissions package. |
| Cooling system | 61 L (16.1 US gal) per most factory spec charts; some listings show roughly 41 L for this configuration - varies by configuration/series, confirm against the nameplate-specific OMM chart | Cat ELC (Extended Life Coolant/Antifreeze), premixed or concentrate to the specified freeze protection. ELC supports the long coolant change interval (up to 12,000 hours / 6 years) versus a conventional low-silicate coolant, which needs much shorter intervals and an extender treatment partway through life. |
| Fuel tank | 530 L (140 US gal) standard main tank; some spec databases list a combined figure near 856 L, reflecting the optional auxiliary tank added to the main tank - varies by configuration | Ultra-low-sulfur diesel (ULSD) meeting the engine's emissions certification. No biodiesel blend above the level stated in the engine fluids manual without dealer confirmation. |
| Optional auxiliary ("pony") fuel tank | 341 L (90 US gal), added to the standard main tank on machines so equipped | Same ULSD specification as the main fuel tank. |
| Hydraulic tank | 262 L (69.2 US gal) | Cat HYDO Advanced (10, 15W-40, or 30 grade selected by ambient temperature) or Cat BIO HYDO Advanced where a biodegradable fluid is required. HYDO Advanced's oxidation stability supports extended drain intervals when paired with S.O.S oil sampling. |
| Hydraulic system total (tank plus lines/cylinders/motors) | 300 L (79.3 US gal) per most factory spec charts; a small number of listings show a much higher combined figure (up to roughly 448 L) - varies by configuration/series, confirm against the nameplate-specific OMM chart | Same Cat HYDO Advanced / Bio HYDO Advanced fluid as the hydraulic tank; do not mix grades within the same circuit. |
| Swing drive housing | 9.8-10 L (2.6 US gal) | Cat TDTO (Transmission/Drive Train Oil), grade selected by ambient temperature range (10W, 30, or 50). |
| Final drives / travel motor housings (each side, ZTS undercarriage) | Not broken out as a separate refill line on published factory spec charts for this model; travel motor/final drive lubrication is serviced per the undercarriage section of the OMM rather than as a standalone tank - verify exact fill quantity with a Cat dealer for the specific serial range | Cat TDTO transmission/drive train oil, same family as the swing drive, grade by ambient temperature. |
| Grease points (felling head, boom, and undercarriage pins - spec only, no fill volume) | Not applicable - lubricated by grease gun at scheduled intervals, not a fill capacity | Cat Advanced 3Moly Grease or Cat Extreme Application (XTM) Grease, NLGI 2, for high-load felling head and linkage pins. Cat multipurpose grease (NLGI 2) for standard chassis and boom grease points. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 521 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
| Every 12,000 h |
|
Servicing the 521 beyond the schedule
Predictive Maintenance & Fluid Analysis
Run S.O.S oil sampling on the C9 ACERT engine, swing drive and hydraulic system at every scheduled interval to catch metal-in-oil trends before a swing drive or final drive failure spreads through the hydraulics. Bio HYDO Advanced or HYDO Advanced fluid analysis flags water intrusion common on wet cutting sites. Track IQAN fault logs and boom-circuit pressure trends through the MD3 display to catch a failing pump or valve spool before it strands the felling head mid-cut.
Corrective & Common Repairs
Expect felling head saw disc or shear knife replacement, HF201B tilt cylinder seal leaks, and boom or stick pin-and-bushing wear as the highest-frequency repairs on a working 521 or 521B. Swing drive and final drive seal leaks show up first as contamination in the case drain. Track shoe bolts loosen under shock loading on rocky ground and need re-torquing. Check felling head accumulator charge whenever cycle times slow, since a discharged accumulator masks itself as a hydraulic fault.
Overhaul & Rebuild Points
Undercarriage wear drives most rebuild decisions: the 521B's 330/D7-class rollers, idlers and track links outlast the base 521's D6H HD-class components but still need rebuild once sprocket and bushing wear passes tolerance. Swing bearing and swing gear replacement is a major job on high-hour machines. C9 ACERT top-end overhaul (injectors, turbo, valve train) typically follows repeated S.O.S flags rather than a fixed hour mark. Rebuild hydraulic pumps and motors before case drain flow signals internal bypass.
Seasonal & Environment Servicing
Cold starts need coolant checked to Cat ELC spec and block heater use before the C9 ACERT is loaded to full power; match hydraulic oil viscosity grade to the swing between winter and summer cutting blocks. Wet ground and mud accelerate undercarriage and swing drive seal wear, so shorten grease intervals on the felling head rotation bearing and boom pins in swampy sites. Clean cab and engine intake filters more often in dusty summer clearcut work to protect the turbo and cooling package.
521 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 220-8678 | Seal-Ring | Fuel system service | Check fitment → |
| 326-1644 | Filter As-Water Sep & Fuel | Fuel system service | Check fitment → |
| 179-9348 | Valve-Drain | Fuel system service | Check fitment → |
| 1R-0762 | Filter As-Fuel | Fuel system service | Check fitment → |
| 142-1339 | Filter Element As-Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
521 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| CID 0100 FMI 03/04 | Engine oil pressure sensor circuit reading outside valid range (voltage above or below normal) | Open or shorted sensor wiring, corroded connector, or failed oil pressure sensor on the C9 ACERT | Check sensor connector and harness for damage or corrosion, then verify sensor output with the engine service tool before replacing the sensor |
| CID 0110 FMI 03/04 | Engine coolant temperature sensor circuit reading outside valid range | Damaged sensor wiring, bad ground, or failed coolant temperature sensor | Inspect harness and connector, confirm sensor resistance against spec, replace sensor if out of range |
| CID 0102 FMI 03/04 | Boost (intake manifold) pressure sensor circuit reading outside valid range | Sensor circuit fault, blocked sense line, or failed boost pressure sensor on the turbocharged C9 ACERT | Check sense line for restriction or moisture, inspect wiring, test sensor output and replace if faulty |
| CID 0190 FMI 08/11 | Engine speed/timing sensor signal abnormal or lost | Loose or damaged speed/timing sensor, excessive air gap, or wiring fault between sensor and ECM | Inspect sensor mounting and air gap, check harness continuity, reseat or replace sensor as needed |
| CID 0254 FMI 12 | Electronic control module (ECM) internal fault | Internal ECM hardware failure or corrupted personality module data | Connect the engine service tool to confirm the fault, cycle power, and replace or reflash the ECM if the fault persists |
| CID 0001-0006 FMI 05/06 | Cylinder injector solenoid circuit open or shorted | Damaged injector wiring, failed injector solenoid, or connector corrosion on the affected cylinder | Check injector harness and connector for that cylinder, measure solenoid resistance, replace injector if out of spec |
| CID 0111 FMI 01 | Engine coolant level low | Coolant leak, low system level, or failed coolant level sensor | Check coolant level and inspect for external or internal leaks before adding coolant, then verify sensor operation |
| IQAN Er:3:1 | CAN bus "no contact" fault between the cab master display and a hydraulic/attachment control module | Broken or disconnected CAN wiring, blown fuse to an expansion module, or a module that has lost power | Check module power and CAN wiring/terminators, reseat connectors, confirm module is powered before clearing the fault |
| IQAN Er:1:1/1:2 | Output or input malfunction on a control module driving a hydraulic valve, joystick input, or attachment function | Short or open circuit on the affected output driver, or a faulty joystick/sensor input feeding that module | Identify the affected function from the display, inspect the specific output or input wiring and connector, then test the module channel |
| IQAN Er:2:1 | Control module power supply fault (voltage out of range) | Weak battery, poor ground, corroded power connector, or an intermittent charging fault feeding the control module | Check battery voltage and ground connections, inspect module power wiring, and test charging system output |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
521 attachments & work tools
Felling head (factory)
Cat 521/521B track feller bunchers are factory-fitted with the Cat HF201B felling head, offered in Full Tilt (330 degree) or Partial Tilt (40 degree) rotation configurations. Head choice depends on stem handling method (piling vs. bunch-and-drop) and terrain.
Felling head (aftermarket-compatible)
The disc-saw felling head mount and hydraulic circuit on the 521/521B also accept third-party accumulator felling heads (disc saw and shear types) from independent forestry-attachment builders, matched by flow class rather than a proprietary coupler. Field units are commonly seen running third-party disc-saw heads in place of the factory head.
Hydraulic flow arrangement - high flow
A high-flow valve group delivers roughly 170-190 L/min (45-50 gal/min, varies by source/configuration) to the felling head grab and accumulator arms, sized for two-cylinder arm sets (one cylinder per arm). Used with larger, higher-capacity felling heads.
Hydraulic flow arrangement - low flow
A low-flow valve group supplies about 110-120 L/min (29-32 gal/min) to the grab and accumulator arms, sized for single-cylinder link-actuated arm sets. Used with lighter felling heads; work-tool maker's flow spec should be checked before selecting an arrangement.
Saw/hotsaw attachment circuit
A dedicated variable-displacement pump (roughly 55 cc displacement class) supplies the felling/processing saw circuit independent of travel and boom pumps, supporting continuous disc saws, hotsaws, and intermittent (retracting-blade) hotsaw attachments. High-pressure hydraulics are used for fast saw recovery and quick arm speed.
Harvester/processor (dangle) head
The 521/521B is also offered in a track-harvester configuration accepting dangle-head harvester/processor attachments, with optional hydraulic setups for dangle heads and intermittent saw heads. Track harvester spec gives a bare-pin lift capacity around 4000 kg (8,800 lb) at up to about 9.9 m (32 ft 6 in) reach.
Linkage/head-mount options
Buyers can spec standard felling linkage, intermittent linkage, or no linkage at all at the head mount, allowing the machine to be built for a specific head type rather than a universal quick-coupler. Mounting is via the boom-end rotator/tilt bracket sized to the HF-series head.
Boom and lift capacity
Feller buncher configuration gives roughly 6100 kg at 6.2 m reach (13,500 lb at 20 ft 6 in), bare-pin, without felling head, with maximum reach near 8.1 m (26.5 ft); harvester configuration trades some lift for reach, up to about 9.9 m (32.5 ft). Boom design is stated to hold lift capacity through the full reach range for large-timber work.
Undercarriage/track guarding
The 521 uses integrated, welded track guards (versus bolt-on guards on the leveling 522/532 models), suited to its fixed-gauge ZTS carbody. Track pads are offered in multiple widths (approximately 610 mm, 711 mm in two variants, and 914 mm), all with clipped corners and mud/snow relief cutouts for forest ground conditions.
Machine guarding (factory options)
Standard/optional guarding includes a hydraulically actuated hinged engine enclosure with a warning alarm, engine fan guard, bottom (belly) guards, and a heavy-duty radiator guard door, protecting the machine in felling debris. These are machine-protection guards, not work-tool guards.
Other factory configuration options
Additional factory options reported for this class include cold-weather starting aids, a heavy counterweight package, HID lighting packages, and a peaked removable skylight for overhead visibility when working under a felling head. These are machine-level options rather than work-tool attachments.
All 521 assemblies by section
Every catalogued assembly group for the Caterpillar 521. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
317-9524 Air Cleaner Gp
| 06***51 | Clamp | 2 |
| 09***86 | Clamp; (Hose) | 3 |
| 14***19 | Connector As | 1 |
210-9245 Air Cleaner Gp
| 10***07 | Seal-O-Ring; (Fuel System) | 1 |
| 14***03 | Seal-O-Ring; (Fuel System) | 2 |
| 14***40 | Ring-Backup; (37.36mm Od), Flasher Switch; Hazard, Replaces 421164a1, Flasher Switch | 1 |
216-9856 Air Cleaner Gp -With Precleaner
| 06***51 | Clamp | 6 |
| 09***86 | Clamp; (Hose) | 3 |
| 14***19 | Connector As | 1 |
173-6107 Elbow Gp-Air Inlet
| 17***07 | Elbow Group-Air Inlet | 1 |
| 17***70 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 23***24 | Pump Group-Fuel Transfer | 1 |
328-9980 Lines Gp-Air
| 23***51 | Bolt-Socket Head; (M8x1.25x65-mm) | 2 |
| 26***60 | Injector Group-Fuel | 1 |
| 32***80 | Lines Group-Air | 1 |
202-0996 Manifold Gp-Exhaust
| 20***96 | Manifold Group-Exhaust | 1 |
| 23***51 | Bolt-Socket Head; (M8x1.25x65-mm) | 2 |
| 32***74 | Injector Group-Fuel | 1 |
216-9857 Muffler Gp
| 21***57 | Muffler Group | 1 |
| 26***61 | Pump Group-Fuel Injection | 6 |
258-8337 Turbocharger Gp
| 17***70 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 19***70 | Base Assembly; (Fuel Priming Pump) | 1 |
| 25***37 | Turbocharger Group | 1 |
250-7700 Turbocharger Gp
| 03***94 | Connector-Flared | 1 |
| 13***27 | Seal-O-Ring; (19.18mm Id Base Side) | 2 |
| 19***77 | Pump Group-Fuel Prm & Water Sep; -Primary Fuel Filter | 1 |
Basic Engine
224-7846 Belt Tensioner Gp
| 0S***89 | Bolt, Hex. Hd., 5/8"-11 N.C. X 1 3/4" | 3 |
| 22***46 | Belt Tensioner Group | 1 |
| 4D***04 | Washer,Flat Cover Mtg,Accessory Drive | 3 |
242-0674 Camshaft Gp
| 13***19 | Seal-Integral; (Integral) | 1 |
| 24***74 | Camshaft Group | 1 |
| 4W***26 | Cover | 1 |
202-3301 Cover Gp-Cylinder Block -Crankcase
| 06***55 | Seal-O-Ring (Id=47.22mm) | 1 |
| 12***57 | Washer; (10.85x19.3x1.27-mm Thk) | 2 |
| 13***22 | Stud | 2 |
133-3089 Cover Gp-Flywheel Housing
| 13***89 | Cover Group-Flywheel Housing | 1 |
| 21***06 | Cover Group-Valve Mechanism | 1 |
| 21***01 | Seal-Bulk; (23-Dm)(Valve Mechanism Cover) | 0 |
118-1727 Cover Gp-Front Housing -Accessory Drive
| 11***27 | Cover Group-Front Housing; -Accessory Drive | 1 |
| 21***01 | Seal-Bulk; (23-Dm)(Valve Mechanism Cover) | 0 |
| 22***31 | Cap As-Filler; (Engine Oil) | 1 |
211-3285 Cover Gp-Front Housing
| 21***85 | Cover Group-Front Housing | 1 |
| 22***31 | Cap As-Filler; (Engine Oil) | 1 |
| 26***27 | Cover Group-Valve Mechanism | 1 |
258-8724 Cover Gp-Valve Mechanism
| 0L***26 | Plug -13mm(.512 In.) Outside Dia. | 2 |
| 17***54 | Bolt-Hex Head; (M16x160mm) | 14 |
| 20***05 | Bearing-Sleeve; (Camshaft) | 2 |
280-8003 Cover Gp-Valve Mechanism
| 03***53 | Seal-O-Ring; (08.92mm Id) | 1 |
| 0S***19 | Plug-Cup | 1 |
| 18***09 | Plug As; (High Temperature) | 1 |
164-6148 Crankshaft Gp
| 16***48 | Crankshaft Group | 1 |
| 16***24 | Seal-Liner | 6 |
| 19***62 | Liner-Cylinder Block | 6 |
325-3915 Cylinder Block As
| 21***17 | Insert-Valve Seat; (Exhaust)(Standard) | 12 |
| 22***00 | Sleeve-Injector | 6 |
| 24***88 | Insert-Valve Seat; (Inlet)(Standard) | 12 |
220-1952 Cylinder Block Gp
| 18***15 | Gasket Assem. | 1 |
| 22***52 | Cylinder Block Group | 1 |
| 25***39 | Cylinder Head Group | 1 |
220-1951 Cylinder Block Gp
| 21***17 | Insert-Valve Seat; (Exhaust)(Standard) | 12 |
| 22***51 | Cylinder Block Group | 1 |
| 22***00 | Sleeve-Injector | 6 |
311-7229 Cylinder Head As
| 14***95 | Plug As | 2 |
| 16***78 | Seal-Valve Stem; (Exhaust) | 12 |
| 19***15 | Spring-Valve; (Inner) | 12 |
332-3619 Cylinder Head As
| 14***95 | Plug As | 2 |
| 16***78 | Seal-Valve Stem; (Exhaust) | 12 |
| 19***15 | Spring-Valve; (Inner) | 12 |
345-8414 Cylinder Head Gp
| 16***71 | Fastener Group-Cylinder Head | 26 |
| 34***14 | Cylinder Head Group | 1 |
| 8C***84 | Bolt; (M8x1.25x150-mm) | 5 |
242-0672 Cylinder Head Gp
| 15***36 | Pulley-Crankshaft; (8-Groove) | 1 |
| 16***21 | Damper Assem. | 1 |
| 24***72 | Cylinder Head Group | 1 |
344-2149 Cylinder Head Gp
| 18***63 | Bolt; (M16x2x180-mm) | 1 |
| 34***49 | Cylinder Head Group | 1 |
| 9X***68 | Washer; (17.5x30x3.5-mm Thk) | 1 |
252-8439 Cylinder Head Gp
| 21***23 | Bracket As | 1 |
| 25***39 | Cylinder Head Group | 1 |
| 4W***03 | Cup-Roller Bearing | 2 |
165-4557 Damper & Pulley Gp
| 16***57 | Damper & Pulley Group | 1 |
| 26***15 | Bolt-12 Point Head; (M16x2x180-mm) | 1 |
| 29***84 | Fastener Group-Cylinder Head | 26 |
231-6686 Drive Gp-Fan
| 22***21 | Spacer; (101.5x167x8-mm Thk) | 1 |
| 23***86 | Drive Group-Fan | 1 |
| 6V***49 | Bolt; (M10x1.5x50-mm) | 8 |
213-4363 Fastener Gp-Cylinder Head
| 21***63 | Fastener Group-Cylinder Head | 1 |
| 24***00 | Spring | 9 |
| 8T***00 | Bolt (M8x1.25x60mm); (M8x1.25x60-mm) | 9 |
167-0171 Fastener Gp-Cylinder Head
| 16***71 | Fastener Group-Cylinder Head | 1 |
| 5P***47 | Washer (Bracket To Valve Support) | 8 |
| 9X***21 | Bolt; (Locking) (M16x2.0x45mm) | 8 |
218-0859 Fastener Gp-Damper & Pulley
| 21***59 | Fastener Group-Damper & Pulley | 1 |
| 24***00 | Spring | 9 |
| 8T***00 | Bolt (M8x1.25x60mm); (M8x1.25x60-mm) | 9 |
117-2794 Fastener Gp-Flywheel
| 11***94 | Fastener Group-Flywheel; (Flywheel) | 1 |
| 25***51 | Gear-Flywheel; (113-Teeth) | 1 |
| 25***61 | Flywheel As | 1 |
258-8728 Fastener Gp-Valve Cover
| 06***55 | Seal-O-Ring (Id=47.22mm) | 1 |
| 13***89 | Clip; (Ladder) | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
236-7315 Fastener Gp-Valve Cover
| 11***69 | Plate-Thrust | 1 |
| 11***72 | Bearing | 1 |
| 11***19 | Plate-Retaining | 1 |
233-0423 Fastener Gp-Valve Cover Base
| 23***23 | Fastener Group-Valve Cover Base | 1 |
| 24***59 | Housing-Front | 1 |
| 6V***18 | Bolt (M8x1.25x50mm); (M8x1.25x50-mm) | 4 |
116-5386 Flywheel Gp
| 11***86 | Flywheel Group | 1 |
| 16***85 | Plate-Lifting; (Rear) | 1 |
| 22***66 | Plate-Lifting; (Front) | 1 |
205-1321 Gear Gp-Front
| 09***88 | Clamp; (Hose) | 1 |
| 10***37 | Washer; (24.5x135x12-mm Thk) | 2 |
| 11***30 | Support As | 2 |
187-0473 Housing Gp-Flywheel
| 14***95 | Plug As | 1 |
| 14***08 | Plug As. | 1 |
| 18***73 | Housing Group-Flywheel | 1 |
245-3260 Housing Gp-Front
| 16***94 | Bearing; (Connecting Rod) | 1 |
| 16***97 | Bolt | 2 |
| 16***99 | Rod Assem. | 1 |
191-3063 Lifting Gp-Engine
| 14***08 | Plug As. | 1 |
| 18***06 | Plug As; (High Temperature) | 2 |
| 19***63 | Lifting Group-Engine | 1 |
216-9855 Mounting Gp-Engine
| 16***47 | Rocker Arm As | 1 |
| 21***55 | Mounting Group-Engine | 1 |
| 26***24 | Screw-Valve Adjustment; (M10x1.5-Thd) | 1 |
219-9943 Pan Gp-Oil
| 21***43 | Pan Group-Oil | 1 |
| 24***28 | Rocker Arm As | 1 |
| 26***24 | Screw-Valve Adjustment; (M10x1.5-Thd) | 1 |
265-1400 Piston & Rod Gp
| 20***19 | Bolt Assem.; (M6x1) | 9 |
| 24***39 | Seal-Crankshaft; (Front)(Front) | 1 |
| 26***00 | Piston & Rod Group | 1 |
169-3105 Plug Gp-Engine
| 16***05 | Plug Group-Engine | 1 |
| 17***01 | Support-Front | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 6 |
242-0329 Rocker Arm Gp -Inlet
| 16***37 | Lifter As-Valve | 12 |
| 21***26 | Valve Mechanism Group | 1 |
| 24***29 | Rocker Arm Group; -Inlet | 1 |
213-9320 Rocker Arm Gp -Exhaust
| 16***45 | Shaft As-Rocker Arm | 1 |
| 16***59 | Spring | 6 |
| 16***69 | Stand; (End) | 2 |
178-3899 Seal Gp-Crankshaft
| 13***19 | Seal-Integral; (Integral) | 1 |
| 17***99 | Seal Group-Crankshaft | 1 |
| 22***65 | Tube As | 1 |
172-0961 Support Gp-Engine
| 03***53 | Seal-O-Ring; (08.92mm Id) | 1 |
| 03***42 | Seal-O-Ring; (11.89mm Id) | 2 |
| 17***61 | Support Group-Engine | 1 |
242-0447 Valve Mechanism Gp
| 18***16 | Tube As-Guide; (Rh) | 1 |
| 21***59 | Gauge-Oil Level (Dipstick); (Engine) | 1 |
| 24***47 | Valve Mechanism Group | 1 |
212-8926 Valve Mechanism Gp
| 21***26 | Valve Mechanism Group | 1 |
| 22***18 | Bracket | 1 |
| 22***34 | Hose-Fumes Disposal | 1 |
Cooling System
188-3826 Cooler Gp-Engine Oil
| 14***11 | Plug Group | 1 |
| 15***25 | Valve-Fluid Sampling | 1 |
| 15***70 | Cap-Dust; (Engine Coolant) | 1 |
216-9860 Cooling Ar
| 12***67 | Clip Loop | 1 |
| 18***94 | Clip | 1 |
| 1P***79 | Flange (Half) | 8 |
216-9864 Fan Ar-Reversible
| 14***88 | Seal As; (Water Pump) | 1 |
| 17***44 | Cover | 1 |
| 17***52 | Shaft As | 1 |
223-7634 Fan Gp-Reversible
| 22***34 | Fan Group-Reversible | 1 |
| 23***82 | Sleeve-Rubber | 8 |
| 23***16 | Radiator Group | 1 |
216-9871 Fan Gp-Suction
| 08***10 | Spacer; (16.6x32x26-mm Thk) | 4 |
| 09***35 | Spacer; (11x25x20-mm Thk) | 1 |
| 09***88 | Clamp; (Hose) | 1 |
248-8835 Housing & Regulator Gp
| 14***39 | Filter Element As-Air; (Primary) | 1 |
| 14***04 | Filter Element As-Air; (Secondary) | 1 |
| 17***92 | Cover As | 1 |
216-9863 Lines Gp-Cooling -Rad, Aftercooler, Hyd Cooler
| 09***35 | Spacer; (11x25x20-mm Thk) | 3 |
| 18***03 | Hose-Elbow | 1 |
| 18***30 | Hose-Elbow | 1 |
244-0989 Lines Gp-Turbocharger Water
| 13***53 | Stud; (M8x1.25x82.75-mm)(M8x1.25x82.75-mm) | 8 |
| 18***71 | Elbow-Air Inlet | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
205-4013 Plug Gp-Water Lines
| 20***13 | Plug Group-Water Lines; -Coolant | 1 |
219-4452 Pump Gp-Water
| 09***35 | Spacer; (11x25x20-mm Thk) | 3 |
| 13***81 | Clamp As | 1 |
| 20***80 | Muffler As | 1 |
202-7674 Pump Gp-Water
| 11***15 | Stud-Taperlock; (M10x85-mm Oal) | 12 |
| 16***11 | Gasket | 6 |
| 19***97 | Manifold-Exhaust | 1 |
226-3629 Radiator & Hyd Oil Cooler Gp
| 13***02 | Clamp As; (Turbine)(Turbine) | 1 |
| 16***63 | Clamp | 2 |
| 19***10 | Cover-Compressor | 1 |
216-9862 Radiator & Mounting Gp
| 14***75 | Valve-Drain; (Fuel) | 1 |
| 16***77 | Plug As | 2 |
| 17***48 | Valve-Drain; (Fuel Filter) | 1 |
235-1016 Radiator Gp
| 10***07 | Seal-O-Ring; (Fuel System) | 1 |
| 14***03 | Seal-O-Ring; (Fuel System) | 1 |
| 14***40 | Ring-Backup; (37.36mm Od), Flasher Switch; Hazard, Replaces 421164a1, Flasher Switch | 1 |
Electrical And Starting System
3e-6328 Alarm Gp -Action
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 17***91 | Bracket Assem. | 1 |
| 17***92 | Body Assem. | 1 |
217-6635 Alternator Gp-Charging
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 21***35 | Alternator Group-Charging | 1 |
197-8820 Alternator Gp-Charging
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 19***20 | Alternator Group-Charging; -24-Volt, 95-Ampere | 1 |
| 20***14 | Lens As; (Floodlight) | 1 |
319-8882 Battery & Wiring Gp
| 09***46 | Screw-Machine; (M8x1.25x16-mm) | 4 |
| 23***25 | Lamp Group-Flood; -Suspended Mount | 2 |
| 31***82 | Battery & Wiring Group | 1 |
340-9411 Battery & Wiring Gp -Heavy Duty
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 13***00 | Clip; (Tab) | 3 |
| 34***11 | Battery & Wiring Group; -Heavy Duty | 1 |
321-7032 Battery & Wiring Gp -Heavy Duty
| 32***32 | Battery & Wiring Group; -Heavy Duty | 1 |
| 6V***01 | Nut; (3/8-16-Thd)(Plate To Rh And Lh Bracket As) | 2 |
| 7X***08 | Washer-Hard; (10.2x16x2-mm Thk) | 2 |
318-8252 Battery & Wiring Gp
| 09***50 | Nut-Wing | 1 |
| 21***85 | Lamp Group-Flood; -24-Volt-Front | 3 |
| 21***87 | Lamp Group-Flood; -24-Volt, 65-Watt | 5 |
262-5304 Battery & Wiring Gp
| 23***25 | Lamp Group-Flood; -Suspended Mount | 3 |
| 25***13 | Cover | 1 |
| 25***14 | Lens; (Amber, Warning Beacon) | 1 |
9w-0742 Block Gp-Junction -Battery
| 11***23 | Stud-Weld; (M10x1.5x25-mm) | 1 |
| 12***02 | Switch Group-Magnetic; -Starting Motor, Start Relay | 1 |
| 13***00 | Clip; (Tab) | 2 |
246-9365 Control & Mtg Gp-Engine Elek
| 13***24 | Circuit Breaker As; (30-Ampere) | 1 |
| 17***06 | Circuit Breaker As; (50-Ampere) | 1 |
| 17***10 | Circuit Breaker As; (80-Ampere) | 1 |
226-7473 Control Gp-Engine Electronic
| 13***00 | Clip; (Tab) | 7 |
| 13***89 | Clip; (Ladder) | 1 |
| 17***00 | Suppressor-Arc | 1 |
320-1521 Electrical Ar
| 03***54 | Elbow; (90 Degree Bumped Tube) | 2 |
| 12***77 | Hose; (190cm) | 0 |
| 13***00 | Clip; (Tab) | 1 |
272-0059 Electrical Ar
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 24***53 | Plug As | 1 |
| 27***59 | Electrical Ar | 1 |
285-5315 Guard Gp-Electronic Control
| 03***54 | Elbow; (90 Degree Bumped Tube) | 2 |
| 12***77 | Hose; (190cm) | 0 |
| 13***00 | Clip; (Tab) | 1 |
162-7755 Lamp Gp-Dome
| 03***54 | Elbow; (90 Degree Bumped Tube) | 2 |
| 13***00 | Clip; (Tab) | 1 |
| 14***11 | Plug Group | 1 |
219-6485 Lamp Gp-Flood
| 03***54 | Elbow; (90 Degree Bumped Tube) | 2 |
| 13***00 | Clip; (Tab) | 1 |
| 13***87 | Clip | 1 |
234-4325 Lamp Gp-Flood
| 19***93 | Sensor Group-Pressure; -Atmospheric | 1 |
| 19***94 | Sensor Group-Pressure; -Engine Oil | 1 |
| 21***47 | Sensor Group-Pressure; -Air Inlet Manifold | 1 |
321-0836 Lamp Gp-Flood
| 16***04 | Sensor Group-Pressure; (Turbocharger Outlet) | 1 |
| 32***36 | Lamp Group-Flood | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
319-7379 Lamp Gp-Flood -Hid
| 16***03 | Sensor Group-Pressure; (Turbocharger Inlet, Rh) | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
| 31***79 | Lamp Group-Flood; -Hid | 1 |
219-6487 Lamp Gp-Flood
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 13***73 | Hose-Fuel; (14 cm) | 0 |
| 13***08 | Clamp | 2 |
319-7380 Lamp Gp-Flood -Hid
| 16***05 | Sensor As-Pressure; (Unfiltered Engine Oil) | 1 |
| 31***80 | Lamp Group-Flood; -Hid | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
332-8810 Lighting Gp-Flood -Hid
| 13***45 | Pad; (Connector) | 1 |
| 26***97 | Sensor Group-Temperature; (Air Inlet Manifold) | 1 |
| 33***10 | Lighting Group-Flood; -Hid | 1 |
261-1091 Lighting Gp-Flood -Cab Front, Rear, Side, Engine Compartment
| 21***67 | Seal-O-Ring | 1 |
| 22***36 | Sensor Group-Pressure; -Injection Actuation | 1 |
| 26***91 | Lighting Group-Flood; -Cab Front, Rear, Side, Engine Compartment | 1 |
332-8811 Lighting Gp-Flood -Hid
| 13***45 | Pad; (Connector) | 1 |
| 26***97 | Sensor Group-Temperature; (Air Inlet Manifold) | 1 |
| 33***11 | Lighting Group-Flood; -Hid | 1 |
320-7443 Lighting Gp-Flood -Cab Front, Side
| 20***40 | Seal-O-Ring; (13.94mm Id) | 2 |
| 24***30 | Sensor Group-Speed; -Engine Timing | 1 |
| 32***43 | Lighting Group-Flood; -Cab Front, Side | 1 |
250-0850 Lighting Gp-Flood -Cab Front, Side
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 19***26 | Harness As-Sensor; (16-18 Ga Wire)(Engine Oil Temperature) | 3 |
| 19***27 | Harness As-Sensor; (14-Ga Wire)(Engine Oil Temperature) | 3 |
117-3915 Motor Gp-Electric -Hydraulic Tank
| 11***15 | Motor Group-Electric; -Engine Prelubrication-Sec Steering, Brake Release | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 23***16 | Heater As; (Starting Aid) | 1 |
306-9319 Mounting Gp-Wiring
| 23***45 | Nut-Sleeve; (5/16-24-Thd) | 1 |
| 23***13 | Bracket | 1 |
| 23***34 | Valve Group-Ether Starting | 1 |
222-9161 Panel Gp-Circuit Breaker
| 13***00 | Clip; (Tab) | 1 |
| 16***95 | Block | 2 |
| 22***61 | Panel Group-Circuit Breaker | 1 |
320-6147 Panel Gp-Circuit Breaker
| 23***45 | Nut-Sleeve; (5/16-24-Thd) | 1 |
| 23***13 | Bracket | 1 |
| 23***34 | Valve Group-Ether Starting | 1 |
238-5022 Panel Gp-Relay
| 21***70 | Preheater Group-Machine; -Hydraulic Tank, Engine | 1 |
| 23***22 | Panel Group-Relay, O-Ring | 1 |
| 32***32 | Battery & Wiring Group; -Heavy Duty | 1 |
235-8200 Plug Gp-Connector -Engine Harness, Protective Cover
| 23***00 | Plug Group-Connector; -Engine Harness, Protective Cover | 1 |
| 32***32 | Battery & Wiring Group; -Heavy Duty | 1 |
| 32***49 | Starting Aid Group-Ether | 1 |
216-9870 Preheater Gp-Machine -Hydraulic Tank, Engine
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 13 |
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
224-9686 Preheater Gp-Machine -Diesel Fired
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
231-1978 Sensor Gp-Engine
| 1B***78 | Nut,Plain,Hexagon Rod To Lever Uoc:Bsv,Bsx | 2 |
| 23***78 | Sensor Group-Engine | 1 |
| 4D***26 | Washer,Lock Starter Ground Cable, Internal And External Teeth | 2 |
330-6034 Sensor Gp-Engine
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 33***34 | Sensor Group-Engine | 1 |
306-6875 Sensor Gp-Liquid Level
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 30***75 | Sensor Group-Liquid Level | 1 |
347-8022 Sensor Gp-Liquid Level -Hydraulic Oil Level
| 08***83 | Washer; (0.8mm Thk) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***99 | Switch As; (Hydraulic Lockout, Neutral Start) | 1 |
266-8650 Sensor Gp-Pressure
| 21***85 | Lamp Group-Flood; -24-Volt-Front | 2 |
| 22***62 | Harness As-Lighting; (Boom Floodlight) | 1 |
| 26***50 | Sensor Group-Pressure; -Intake Manifold Air | 1 |
267-1402 Sensor Gp-Pressure
| 21***85 | Lamp Group-Flood; -24-Volt-Front | 2 |
| 25***09 | Harness As-Lighting; (Boom) | 1 |
| 26***02 | Sensor Group-Pressure; -Injection Actuation | 1 |
236-6220 Sensor Gp-Pressure
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***75 | Horn As; (24-Volt, High Tone) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
197-8393 Sensor Gp-Pressure
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 19***93 | Sensor Group-Pressure; -Atmospheric | 1 |
210-1747 Sensor Gp-Pressure
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 21***47 | Sensor Group-Pressure; -Air Inlet Manifold | 1 |
276-9067 Sensor Gp-Pressure
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***61 | Housing | 1 |
224-4536 Sensor Gp-Pressure
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 22***36 | Sensor Group-Pressure; -Injection Actuation | 1 |
303-3357 Sensor Gp-Pressure
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***09 | Knob-Control | 1 |
197-8394 Sensor Gp-Pressure
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 19***94 | Sensor Group-Pressure; -Engine Oil | 1 |
236-6221 Sensor Gp-Speed -Engine Timing
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***09 | Knob-Control | 1 |
274-7395 Sensor Gp-Temperature
| 12***33 | Clip | 1 |
| 13***00 | Clip; (Tab) | 2 |
| 13***51 | Spacer; (11x19x6-mm Thk) | 1 |
274-7396 Sensor Gp-Temperature
| 12***33 | Clip | 1 |
| 13***00 | Clip; (Tab) | 2 |
| 13***51 | Spacer; (11x19x6-mm Thk) | 1 |
234-5012 Sensor Gp-Temperature
| 21***49 | Harness Assembly; (Unit Injector) | 1 |
| 23***12 | Sensor Group-Temperature; -Coolant, Water | 1 |
| 23***02 | Harness Assembly; (Electronic Control Module) | 1 |
234-5013 Sensor Gp-Temperature
| 21***49 | Harness Assembly; (Unit Injector) | 1 |
| 23***13 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
| 23***02 | Harness Assembly; (Electronic Control Module) | 1 |
238-3215 Starting Aid Gp -Air Inlet Manifold
| 03***12 | Terminal-Ring; (2-Ga, 1/4-In Screw)(Circuit Breaker) | 1 |
| 12***33 | Clip | 1 |
| 13***00 | Clip; (Tab) | 2 |
329-9549 Starting Aid Gp-Ether
| 03***48 | Clip; (11.11mm .437in Id) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
311-2626 Starting Aid Gp-Ether
| 03***07 | Terminal-Ring; (0-Ga, 3/8-In Screw) | 1 |
| 11***97 | Diode As; (Bipolar) | 1 |
| 13***43 | Boot; (Red)(Red) | 1 |
327-5254 Starting Ar-Cold Weather
| 03***48 | Clip; (11.11mm .437in Id) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
327-5253 Starting Ar-Cold Weather -Preheater
| 03***48 | Clip; (11.11mm .437in Id) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
329-5861 Starting Gp-Cold Weather
| 16***09 | Final Drive & Brake Group | 1 |
| 27***73 | Motor Group-Travel | 1 |
| 32***61 | Starting Group-Cold Weather | 1 |
104-7041 Starting Motor Gp-Electric
| 10***41 | Starting Motor Group-Electric | 1 |
| 20***58 | Sprocket-Track | 1 |
| 7X***75 | Bolt; (M24x3x60-mm) | 16 |
6v-0590 Starting Motor Gp-Electric
| 09***28 | Ring-Retaining; (External) | 5 |
| 10***22 | Bearing As-Roller | 10 |
| 10***18 | Ring-Retaining | 5 |
223-6377 Starting Motor Gp-Electric
| 22***77 | Starting Motor Group-Electric | 1 |
| 31***10 | Box As-Battery, Exhaust Valve, Exhaust Valve; Serviced As 38***91. | 1 |
| 31***25 | Plate | 2 |
7n-0718 Switch Gp-Disconnect -Battery
| 14***06 | Plug As | 1 |
| 18***06 | Plug As; (High Temperature) | 1 |
| 21***60 | Plate As | 1 |
179-0006 Switch Gp-Magnetic
| 08***87 | Grommet | 5 |
| 09***83 | Shim (1.0 mm Thick) | 1 |
| 09***90 | Shim (1.0 mm Thick) | 2 |
209-5582 Switch Gp-Magnetic -Start Relay-Starting Aid Heater Relay
| 09***95 | Plug | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 20***82 | Switch Group-Magnetic; -Starting Aid Heater Relay-Air Inlet Heater Relay | 1 |
125-1302 Switch Gp-Magnetic -Start Relay
| 08***87 | Grommet | 5 |
| 09***83 | Shim (1.0 mm Thick) | 1 |
| 09***90 | Shim (1.0 mm Thick) | 2 |
241-8368 Switch Gp-Magnetic -Main Relay
| 11***83 | Seal (1100 cm) (Order By The Centimeter) | 0 |
| 24***68 | Switch Group-Magnetic; -Main Power Relay-Main Relay | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
234-6613 Switch Gp-Position -Hydraulic Lockout
| 19***78 | Gear & Bearing Group-Swing | 1 |
| 22***88 | Gear & Bearing Group-Swing | 1 |
| 23***13 | Switch Group-Position; -Hydraulic Lockout | 1 |
258-0883 Switch Gp-Pressure -Fuel Filter, Differential-Fuel Filter
| 22***73 | Seal-Dust | 2 |
| 25***83 | Switch Group-Pressure; -Fuel Filter, Differential-Fuel Filter | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
165-5970 Switch Gp-Toggle -Hyd Tank Fill Pump, Motor
| 16***70 | Switch Group-Toggle; -Engine Shutoff-Starting Aid-Diagnostic Mode Select | 1 |
| 1K***50 | Spring | 1 |
| 25***84 | Plate | 1 |
158-6634 Switch Gp-Toggle
| 15***34 | Switch Group-Toggle; -Stairway Access Lights | 1 |
| 19***78 | Hinge | 1 |
| 1K***50 | Spring | 1 |
239-1134 Valve Gp-Ether Starting
| 20***38 | Rod As | 1 |
| 22***44 | Cover | 2 |
| 22***43 | Angle | 1 |
217-2437 Warning Gp-Backup
| 20***38 | Rod As | 1 |
| 21***37 | Warning Group-Backup | 1 |
| 22***44 | Cover | 2 |
253-2606 Wiring Gp-Boom -Floodlights
| 15***11 | Lockwasher | 3 |
| 15***59 | Eyebolt; (M8x1.25x100-mm) | 2 |
| 21***15 | Strip | 1 |
212-8018 Wiring Gp-Boom -Floodlights
| 12***36 | Handle | 2 |
| 21***18 | Wiring Group-Boom; -Floodlights | 1 |
| 26***82 | Latch As; (Heavy-Duty) | 1 |
280-0558 Wiring Gp-Cab
| 11***31 | Mount Assem. | 8 |
| 24***98 | Sleeve | 8 |
| 24***39 | Washer; (32x135x12-mm Thk) | 6 |
280-0561 Wiring Gp-Console
| 11***23 | Stud-Weld; (M10x1.5x25-mm) | 2 |
| 28***61 | Wiring Group-Console | 1 |
| 7T***99 | Link | 6 |
236-6226 Wiring Gp-Electronic Control -Engine
| 12***18 | Sleeve | 1 |
| 14***25 | Connector As. | 4 |
| 17***07 | Clip | 2 |
330-6018 Wiring Gp-Electronic Control
| 09***36 | Seal-Lip Type | 1 |
| 09***12 | Ring, Back-Up | 2 |
| 09***19 | Seal-O-Ring (Id=59.60mm) | 2 |
222-9157 Wiring Gp-Engine
| 16***89 | Step As | 1 |
| 21***72 | Frame As-Undercarriage | 1 |
| 22***57 | Wiring Group-Engine | 1 |
320-8403 Wiring Gp-Engine
| 10***09 | Track Adjuster Group | 2 |
| 20***70 | Idler Group-Front | 2 |
| 32***03 | Wiring Group-Engine | 1 |
269-3410 Wiring Gp-Heater -Air Inlet Manifold
| 10***85 | Seal Group-Duo-Cone | 2 |
| 11***51 | Shaft-Idler | 1 |
| 11***97 | Bearing | 2 |
255-6927 Wiring Gp-Hyd Tank Fill Pump
| 10***75 | Spring Group-Recoil | 1 |
| 20***69 | Idler Group-Front | 1 |
| 25***27 | Wiring Group-Hydraulic Tank Fill Pump | 1 |
272-0060 Wiring Gp-Machine
| 15***71 | Ring; (Thrust) | 96 |
| 19***25 | Pin; (Track) | 48 |
| 20***44 | Seal As | 96 |
320-1523 Wiring Gp-Machine
| 15***86 | Collar; (Track Roller) | 2 |
| 15***26 | Dowel | 2 |
| 20***62 | Roller & Bearing As | 1 |
Engine Arrangement
264-0399 Engine Ar-Complete
| 15***43 | Coupling & Mtg Group-Pump | 1 |
| 21***55 | Mounting Group-Engine | 1 |
| 21***56 | Air Cleaner Group; -With Precleaner | 1 |
264-0403 Engine Ar-Core
| 18***49 | Support | 1 |
| 19***43 | Belt Tensioner | 1 |
| 26***03 | Engine Ar-Core | 1 |
213-2400 Installation Ar-Engine
| 21***00 | Installation Ar-Engine | 1 |
| 21***10 | Gasket | 1 |
| 21***11 | Cover; (Cylinder Block) | 1 |
Frame And Body
316-6440 Box Gp-Battery
| 1S***60 | Nut-Track; (3/4-16-Thd) | 196 |
| 26***58 | Link As-Track; -Grease Lubricated Track | 1 |
| 31***40 | Box Group-Battery | 1 |
333-0597 Brace Gp
| 1S***60 | Nut-Track; (3/4-16-Thd) | 196 |
| 20***83 | Shoe-Track | 49 |
| 26***58 | Link As-Track; -Grease Lubricated Track | 1 |
272-0054 Counterweight Gp
| 1S***60 | Nut-Track; (3/4-16-Thd) | 196 |
| 20***35 | Shoe; (Track) | 49 |
| 26***58 | Link As-Track; -Grease Lubricated Track | 1 |
356-6534 Counterweight Gp
| 10***35 | Bushing-Track | 1 |
| 10***37 | Pin-Track | 1 |
| 10***39 | Joint As; (Rh) | 49 |
356-6535 Counterweight Gp
| 10***35 | Bushing-Track | 1 |
| 10***37 | Pin-Track | 1 |
| 10***40 | Joint As; (Lh) | 49 |
340-9880 Door As-Access
| 10***21 | Guard Group-Swivel; (Swivel) | 1 |
| 15***35 | Gear & Bearing Group-Swing | 1 |
| 18***71 | Idler Group-Front | 1 |
272-0052 Frame Gp-Upper
| 25***95 | Roller Group-Track-Single Flange | 4 |
| 26***59 | Track Group; -2-Required | 2 |
| 27***52 | Frame Group-Upper | 1 |
227-6087 Gear & Bearing Gp-Swing
| 15***58 | Flange | 1 |
| 15***59 | Hub | 1 |
| 22***87 | Gear & Bearing Group-Swing | 1 |
152-1735 Gear & Bearing Gp-Swing
| 15***35 | Gear & Bearing Group-Swing | 1 |
| 25***95 | Roller Group-Track-Single Flange | 4 |
| 26***60 | Track Group; -2-Required | 2 |
199-4478 Gear & Bearing Gp-Swing
| 19***78 | Gear & Bearing Group-Swing | 1 |
| 2J***64 | Plug-Drain; (Hydraulic Filter Bypass) | 1 |
| 3G***73 | Spring; (Inner) | 1 |
227-6088 Gear & Bearing Gp-Swing
| 12***62 | Seal-O-Ring | 1 |
| 17***30 | Cover | 1 |
| 22***88 | Gear & Bearing Group-Swing | 1 |
261-1089 Guard Gp-Lighting
| 10***96 | Bolt-Socket Head; (M10x1.5x50-mm) | 8 |
| 14***27 | Connector Group | 2 |
| 14***76 | Elbow As | 1 |
321-8957 Guard Gp-Lighting
| 14***76 | Elbow As | 1 |
| 17***22 | Elbow | 2 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 2 |
216-9865 Guard Gp-Radiator
| 10***96 | Bolt-Socket Head; (M10x1.5x50-mm) | 8 |
| 14***27 | Connector Group | 2 |
| 14***76 | Elbow As | 1 |
247-7641 Guard Gp-Radiator
| 10***96 | Bolt-Socket Head; (M10x1.5x50-mm) | 20 |
| 14***27 | Connector Group | 6 |
| 14***76 | Elbow As | 2 |
340-9907 Guard Gp-Radiator
| 28***13 | Cylinder & Mtg Group-Stick | 1 |
| 28***14 | Cylinder & Mtg Group-Boom | 1 |
| 28***52 | Cylinder & Mtg Group-Saw | 1 |
100-3721 Guard Gp-Swivel
| 10***21 | Guard Group-Swivel; (Swivel) | 1 |
| 28***13 | Cylinder & Mtg Group-Stick | 1 |
| 28***14 | Cylinder & Mtg Group-Boom | 1 |
330-5882 Hood As
| 28***13 | Cylinder & Mtg Group-Stick | 1 |
| 28***14 | Cylinder & Mtg Group-Boom | 1 |
| 33***82 | Hood As | 1 |
331-9410 Hood Gp
| 08***05 | Stop | 1 |
| 09***29 | Ring; (Retaining) | 2 |
| 09***31 | Seal-O-Ring; (Id=119.60mm) | 1 |
272-0053 Hood Gp
| 10***17 | Valve Group-Counterbalance; -Hood Tilt Cylinder | 1 |
| 11***15 | Clevis | 1 |
| 23***74 | Pin | 2 |
212-8019 Plate Gp-Frame
| 08***05 | Stop | 1 |
| 09***29 | Ring; (Retaining) | 2 |
| 09***31 | Seal-O-Ring; (Id=119.60mm) | 1 |
280-1999 Step As
| 08***05 | Stop | 1 |
| 09***29 | Ring; (Retaining) | 2 |
| 09***31 | Seal-O-Ring; (Id=119.60mm) | 1 |
235-6512 Step Gp
| 09***71 | Ring; (Retaining) | 1 |
| 09***29 | Ring; (Retaining) | 2 |
| 09***31 | Seal-O-Ring; (Id=119.60mm) | 1 |
217-9693 Tilt Gp-Hood
| 09***55 | Pin | 1 |
| 11***29 | Bolt; (M24x3x100-mm) | 16 |
| 16***73 | Valve Group-Shutoff | 1 |
Fuel System
224-5005 Filter Gp-Fuel -Secondary
| 03***94 | Connector-Flared | 1 |
| 13***27 | Seal-O-Ring; (19.18mm Id Base Side) | 2 |
| 20***34 | Regulator-Pressure; (Fuel) | 1 |
174-9570 Filter Gp-Water Sep & Fuel -Primary
| 03***50 | Elbow (Check Valve Drain Tube) | 1 |
| 15***06 | Seal-O-Ring; (11.89mm Id) | 1 |
| 17***70 | Filter Group-Water Sep & Fuel; -Primary | 1 |
328-2574 Injector Gp-Fuel
| 09***25 | Seal-O-Ring (Id=154.30mm) | 1 |
| 14***35 | Connect Group; (Each Includes) | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
293-4072 Injector Gp-Fuel
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 23***43 | Regulator Group-Fuel Pressure | 1 |
| 29***72 | Injector Group-Fuel | 1 |
267-3360 Injector Gp-Fuel
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
| 26***60 | Injector Group-Fuel | 1 |
| 29***20 | Regulator As; (Fuel Pressure) | 1 |
216-9868 Lines Gp-Fuel
| 18***38 | Collar | 2 |
| 18***39 | Fan As; (Alternator) | 1 |
| 18***44 | Coil Assem. | 1 |
235-8725 Pump Gp-Filter & Fuel Transfer -Primary
| 03***12 | Terminal-Ring; (2-Ga, 1/4-In Screw)(Circuit Breaker) | 1 |
| 11***22 | Battery Group; (12-Volt, Maintenance Free, Wet) | 2 |
| 12***73 | Cap As-Filler; (Battery) | 6 |
267-3362 Pump Gp-Fuel Injection
| 26***62 | Pump Group-Fuel Injection | 1 |
| 6V***22 | Tube-Heat Shrink; (25.4-mm Dia)(10-M) | 0 |
| 7F***60 | Washer | 6 |
267-3361 Pump Gp-Fuel Injection
| 11***22 | Battery Group; (12-Volt, Maintenance Free, Wet) | 2 |
| 12***73 | Cap As-Filler; (Battery) | 6 |
| 20***99 | Clip | 38 |
188-6121 Pump Gp-Fuel Prm & Prim Filter -With Water Separator
| 10***28 | Spacer-Special; (12.7x26x28.7-mm Thk) | 4 |
| 14***92 | Stud; (M8x1.25-Thd) | 4 |
| 18***21 | Pump Group-Fuel Prm & Prim Filter; -With Water Separator-Primary | 1 |
190-8977 Pump Gp-Fuel Prm & Water Sep -Primary Fuel Filter
| 19***77 | Pump Group-Fuel Prm & Water Sep; -Primary Fuel Filter | 1 |
| 26***78 | Control Group-Unprogrammed; (Engine) | 1 |
256-6915 Pump Gp-Fuel Transfer
| 21***37 | Warning Group-Backup | 1 |
| 22***57 | Wiring Group-Engine | 1 |
| 25***27 | Wiring Group-Hydraulic Tank Fill Pump | 1 |
271-2234 Pump Gp-Unit Injector Hyd
| 21***37 | Warning Group-Backup | 1 |
| 25***27 | Wiring Group-Hydraulic Tank Fill Pump | 1 |
| 26***91 | Lighting Group-Flood; -Cab Front, Rear, Side, Engine Compartment | 1 |
232-0343 Regulator Gp-Fuel Pressure
| 12***78 | Locknut; (M6x1-Thd) | 2 |
| 23***43 | Regulator Group-Fuel Pressure | 1 |
| 26***01 | Sheet As | 1 |
273-2445 Regulator Gp-Fuel Pressure
| 15***26 | Switch; (Dome Light) | 1 |
| 15***27 | Lamp; (24-Volt)(Dome Light) | 2 |
| 15***28 | Lens; (Dome Light) | 1 |
269-0681 Tank Gp-Fuel -Auxiliary
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 17***91 | Bracket Assem. | 1 |
| 17***92 | Body Assem. | 1 |
Hydraulic System
3g-7232 Bypass Gp-Filter -Hydraulic Oil
| 10***77 | Bolt-Socket Head; (M10x1.5x45-mm) | 4 |
| 15***62 | Union As | 1 |
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 13 |
154-6643 Coupling & Mtg Gp-Pump
177-2521 Cover Gp-Pump
| 10***77 | Bolt-Socket Head; (M10x1.5x45-mm) | 4 |
| 15***62 | Union As | 1 |
| 17***21 | Cover Group-Pump | 1 |
171-2446 Cover Gp-Valve End
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 8 |
| 10***93 | Flange | 2 |
| 10***77 | Bolt-Socket Head; (M10x1.5x45-mm) | 4 |
282-3014 Cylinder & Mtg Gp-Boom
| 20***30 | Tag-Identification; (Aa Head) | 2 |
| 20***31 | Tag-Identification; (Aa Rod) | 2 |
| 20***32 | Tag-Identification; (Ga Head) | 2 |
327-8141 Cylinder & Mtg Gp-Boom
| 14***25 | Connector As. | 2 |
| 14***68 | Elbow Group | 1 |
| 15***33 | Elbow, 45°,-6 Orb /-4 Orfs | 1 |
282-3152 Cylinder & Mtg Gp-Saw
| 11***60 | Union | 1 |
| 14***55 | Union As | 4 |
| 15***26 | Union Assembly | 4 |
282-3013 Cylinder & Mtg Gp-Stick
| 11***65 | Bracket | 1 |
| 11***11 | Tee-O-Ring Port | 1 |
| 12***50 | Valve-Check; (Quick Coupler Solenoid) | 2 |
282-3109 Cylinder & Mtg Gp-Stick & Saw -Harvester Head, Lh
| 11***65 | Bracket | 1 |
| 12***50 | Valve-Check; (Quick Coupler Solenoid) | 1 |
| 12***44 | Hose Assem. | 1 |
248-6874 Cylinder Ar-Hydraulic -Boom, Stick
| 09***49 | Bolt; (M8x1.25x40-mm) | 2 |
| 11***18 | Tee-Swivel | 1 |
| 11***65 | Bracket | 1 |
217-9701 Cylinder Ar-Hydraulic -Boom, Stick, Saw Tilt
| 09***49 | Bolt; (M8x1.25x40-mm) | 2 |
| 11***65 | Bracket | 1 |
| 12***50 | Valve-Check; (Quick Coupler Solenoid) | 1 |
322-3568 Cylinder Gp-Boom
| 10***02 | Bolt-Socket Head; (M12x1.75x30-mm) | 2 |
| 10***19 | Bolt; (Socket Head) (M12x1.75x70mm) | 2 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
251-8281 Cylinder Gp-Hood Tilt
| 10***02 | Bolt-Socket Head; (M12x1.75x30-mm) | 2 |
| 10***19 | Bolt; (Socket Head) (M12x1.75x70mm) | 2 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
215-9097 Cylinder Gp-Hydraulic -Boom
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 11***17 | Clip | 1 |
| 13***00 | Clip; (Tab) | 3 |
215-9092 Cylinder Gp-Stick -Boom
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 11***17 | Clip | 1 |
| 13***00 | Clip; (Tab) | 3 |
254-5457 Cylinder Gp-Tilt -Saw
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 11***17 | Clip | 1 |
| 13***00 | Clip; (Tab) | 3 |
274-7480 Cylinder Gp-Tilt -Saw
| 11***34 | Tee-O-Ring | 1 |
| 12***75 | Filter Group-Oil; -Hyraulic Oil-Hydraulic, Case Drain | 2 |
| 14***28 | Connector Assem. | 1 |
217-9689 Drive Ar-Swing
| 11***34 | Tee-O-Ring | 1 |
| 14***28 | Connector Assem. | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
201-7808 Drive Gp-Swing
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 11***17 | Clip | 1 |
| 13***00 | Clip; (Tab) | 2 |
220-8623 Drive Gp-Swing
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 11***17 | Clip | 1 |
| 13***00 | Clip; (Tab) | 2 |
289-7836 Filter & Valve Gp-Pilot -Hydraulic Oil
| 14***18 | Reducer; (-8orfs/-12orfs Swivel) | 5 |
| 14***55 | Union As | 14 |
| 15***26 | Union Assembly | 1 |
188-2084 Filter & Valve Gp-Pilot -Hydraulic Oil
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 11***17 | Clip | 1 |
| 13***00 | Clip; (Tab) | 3 |
158-8987 Filter & Valve Gp-Pilot -Hydraulic Oil
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 11***17 | Clip | 1 |
| 13***00 | Clip; (Tab) | 3 |
222-7092 Filter Gp-Oil -Hydraulic
| 10***18 | Grommet | 2 |
| 14***60 | Grommet | 2 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 2 |
126-2075 Filter Gp-Oil -Case Drain
| 11***60 | Union | 1 |
| 12***75 | Filter Group-Oil; -Hyraulic Oil-Hydraulic, Case Drain | 1 |
| 14***55 | Union As | 6 |
289-8194 Filter Gp-Oil -Hydraulic, Case Drain
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 1 |
| 14***55 | Elbow As. | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
227-0620 Gauge Gp-Sight -Hydraulic Oil Level
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 1 |
| 14***55 | Elbow As. | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
192-2892 Head Gp-Motor -Travel
| 18***30 | Valve Group-Relief; -Swing Motor | 2 |
| 18***75 | Motor Group-Swing | 1 |
| 19***92 | Head Group-Motor; -Travel | 1 |
291-1126 Head Gp-Motor
| 09***00 | Seal-O-Ring (Id=33.70mm) | 2 |
| 09***33 | Seal-Lip Type | 1 |
| 09***11 | Pin; (Spring) | 2 |
270-4694 Head Gp-Pump -Main Hydraulic
| 12***54 | Setscrew; (M12x1.75-Thd) | 1 |
| 12***13 | Seal; (Shaft) | 1 |
| 12***14 | Shim; (3-mm Thk) | 1 |
308-4488 Head Gp-Pump -Main Hydraulic
| 30***88 | Head Group-Pump; -Main Hydraulic | 1 |
| 6V***30 | Cap As -Lines From Rotate Valve Work | 5 |
| 6V***32 | Cap As | 4 |
272-0056 Hydraulic Ar
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 15***44 | Elbow Group | 1 |
| 20***66 | Pump & Motor Group; -Hydraulic Tank Fill | 1 |
284-5616 Hydraulic Ar
| 26***29 | Pump Group-Piston; -Main Hydraulic, Felling Head | 1 |
| 28***16 | Hydraulic Ar | 1 |
| 8T***60 | Washer-Hard (For Use With 7/16 In Bolts) | 7 |
282-3068 Hydraulic Ar-Harvester -Without Linkage
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 11***17 | Clip | 1 |
| 13***00 | Clip; (Tab) | 3 |
245-1969 Kit-Seal -Feed Reducer Plug
| 08***01 | Plug As | 3 |
| 09***91 | Ball Bearing | 1 |
| 12***13 | Seal; (Shaft) | 1 |
217-9705 Lines Gp-Boom -Felling Head
| 08***01 | Plug As | 3 |
| 09***91 | Ball Bearing | 1 |
| 12***13 | Seal; (Shaft) | 1 |
253-2603 Lines Gp-Boom -Harvester Head
| 19***83 | Rotating Group-Motor; -Travel | 1 |
| 19***86 | Shaft Group-Hydraulic Motor | 1 |
| 25***03 | Lines Group-Boom; -Harvester Head | 1 |
306-9318 Lines Gp-Control -Crossover, Travel
| 11***19 | Screw-Special; (M5x0.8x8-mm) | 14 |
| 12***29 | Plate-Control | 1 |
| 12***30 | Pin-Center | 1 |
253-2604 Lines Gp-Front -Boom, Harvester Head
| 12***87 | Ring-Retaining | 1 |
| 17***91 | Plate; (2.6-mm Thk) | 1 |
| 17***92 | Plate; (2.65-mm Thk) | 1 |
282-3065 Lines Gp-Front -Boom, Harvester Head
| 17***02 | Pin | 1 |
| 17***10 | Spring | 4 |
| 17***11 | Plate | 1 |
282-3064 Lines Gp-Front -Boom Cylinder, Harvester Head
| 12***87 | Ring-Retaining | 1 |
| 17***91 | Plate; (2.6-mm Thk) | 1 |
| 17***92 | Plate; (2.65-mm Thk) | 1 |
217-9707 Lines Gp-Front -Boom, Felling Head
| 12***87 | Ring-Retaining | 1 |
| 17***87 | Shim; (3.3-mm Thk) | 1 |
| 17***88 | Shim; (3.4-mm Thk) | 1 |
282-3101 Lines Gp-Front -Boom, Stick
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 5 |
| 09***49 | Bolt; (M8x1.25x40-mm) | 8 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
282-3102 Lines Gp-Front -Boom, Felling Head
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 5 |
| 09***49 | Bolt; (M8x1.25x40-mm) | 6 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
317-5827 Lines Gp-Hood Tilt
| 27***59 | Tube As | 1 |
| 31***27 | Lines Group-Hood Tilt | 1 |
| 5P***66 | Capscrew; (Hex Hd) (1/2-13 Nc X 1 1/2) (Gd 8 Z) | 2 |
285-0933 Lines Gp-Motor
| 14***15 | Hose As | 1 |
| 14***09 | Adapter As | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 3 |
282-3108 Lines Gp-Motor
| 09***43 | Retainer | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***37 | Hose Assem. | 1 |
272-0058 Lines Gp-Pilot
| 11***60 | Union | 1 |
| 12***37 | Clip-Loop | 2 |
| 12***23 | Bracket Assem. | 1 |
306-9317 Lines Gp-Pilot -Power Shift Option
| 09***56 | Setscrew-Socket | 1 |
| 10***04 | Seal-O-Ring | 1 |
| 16***67 | Dowel | 1 |
282-3071 Lines Gp-Pump
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 16***40 | Valve Group-Relief; (Line) | 2 |
275-7941 Lines Gp-Pump
| 22***44 | Kit-Relief Valve; (Main, Load Sensing) | 1 |
| 22***46 | Kit-Valve | 1 |
| 22***50 | Kit-Control Valve; (Seal)(Control Valve) | 1 |
217-9692 Lines Gp-Return
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
253-2607 Lines Gp-Saw
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
256-0350 Lines Gp-Saw
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 16***43 | Valve Group-Relief; (Control Valve) | 2 |
217-9709 Lines Gp-Saw
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
217-9703 Lines Gp-Stick
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 16***43 | Valve Group-Relief; (Control Valve) | 2 |
253-2602 Lines Gp-Stick
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
222-9062 Lines Gp-Travel Motor
| 22***62 | Lines Group-Travel Motor | 1 |
| 22***44 | Kit-Relief Valve; (Main, Load Sensing) | 1 |
| 22***50 | Kit-Control Valve; (Seal)(Control Valve) | 1 |
281-6404 Motor & Mtg Gp-Swing
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 16***43 | Valve Group-Relief; (Control Valve) | 2 |
206-1513 Motor & Mtg Gp-Swing
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 16***43 | Valve Group-Relief; (Control Valve) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
334-9978 Motor Gp-Swing
| 12***94 | Plug; (Break Off) | 5 |
| 12***17 | Plug | 1 |
| 15***85 | Dowel | 2 |
188-4175 Motor Gp-Swing
| 12***96 | Pin | 2 |
| 12***98 | Seat | 2 |
| 12***99 | Seat | 2 |
179-9775 Motor Gp-Swing
| 11***16 | Kit-Seal; (Counterbalance Valve) | 1 |
| 17***75 | Motor Group-Swing | 1 |
334-9971 Motor Gp-Swing
| 22***32 | Valve Group-Control; -Inlet | 1 |
| 22***33 | Valve Group-Control; -Accum Arms-Hf, Lo/Hi Flow-Hp-Grapple-Hf, High Flow-Hp | 2 |
| 22***35 | Valve Group-Control; -Swing | 1 |
320-2393 Motor Gp-Travel
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 4 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 2 |
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 12 |
279-9873 Motor Gp-Travel
| 08***59 | Setscrew | 2 |
| 12***79 | Piston | 2 |
| 12***81 | Seat | 2 |
206-6508 Plug Gp-Hydraulic Lines
| 09***98 | Seal-O-Ring (Id=29.40mm) | 1 |
| 16***13 | Body As | 1 |
| 16***63 | Retainer | 1 |
217-9690 Pump & Lines Gp-Hyd Tank Fill
| 10***66 | Adapter | 2 |
| 21***90 | Pump & Lines Group-Hydraulic Tank Fill | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 2 |
205-5266 Pump & Motor Gp -Hydraulic Tank Fill
| 12***98 | Seat | 1 |
| 12***99 | Seat | 1 |
| 13***49 | Connector | 1 |
212-8039 Pump & Motor Gp-Hood Tilt
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***48 | Kit-Seal; (Solenoid Valve) | 1 |
| 15***84 | Locknut; (Special) (5/8-18 Thd) | 1 |
308-0095 Pump & Mtg Gp-Main Hydraulic
| 11***43 | Locknut; (5/16-18-Thd) | 2 |
| 15***38 | Cartridge Assem. | 1 |
| 19***01 | Kit-Seal; (Solenoid Valve) | 1 |
217-9700 Pump & Mtg Gp-Main Hydraulic -Felling Head
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 12***14 | Seal-O-Ring (Id=10.82mm) | 1 |
| 12***15 | Seal-O-Ring (Id=12.42mm) | 1 |
283-2529 Pump & Mtg Gp-Saw
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 11***43 | Locknut; (5/16-18-Thd) | 2 |
| 16***71 | Kit-Seal; (Solenoid Valve) | 1 |
268-8259 Pump Gp-Piston
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***70 | Nut; (1/2-20-2b-Thd) | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
308-0094 Pump Gp-Piston -Main Hydraulic
| 12***27 | Manifold | 1 |
| 19***39 | Valve Group-Solenoid; -Pressure Reducing | 1 |
| 30***94 | Pump Group-Piston; -Main Hydraulic | 1 |
268-6729 Pump Gp-Piston -Main Hydraulic, Felling Head
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
| 17***92 | Kit-Seal; (Solenoid Valve) | 1 |
| 21***73 | Nut; (1/2-28-Thd) | 1 |
191-0883 Rotating Gp-Motor -Travel
| 15***40 | Valve Group-Solenoid; -Reversing Fan, Ride Control | 3 |
| 19***83 | Rotating Group-Motor; -Travel | 1 |
| 27***76 | Valve Group-Solenoid; -Reversing Fan 1 | 1 |
190-8121 Rotating Gp-Motor -Travel
| 17***85 | Valve Group-Solenoid | 1 |
| 19***21 | Rotating Group-Motor; -Travel | 1 |
| 22***64 | Cartridge As-Valve | 2 |
216-0035 Rotating Gp-Pump -Hydraulic-Main Hydraulic
| 09***83 | Shim (1.0 mm Thick) | 2 |
| 09***90 | Shim (1.0 mm Thick) | 2 |
| 09***15 | Shim (2.0 mm Thick) | 2 |
283-5978 Rotating Gp-Pump -Main Hydraulic
| 03***48 | Clip; (11.11mm .437in Id) | 2 |
| 14***85 | Clip | 1 |
| 21***18 | Lines Group-Grease; -Boom | 1 |
283-5977 Rotating Gp-Pump -Main Hydraulic
| 09***83 | Shim (1.0 mm Thick) | 2 |
| 09***90 | Shim (1.0 mm Thick) | 2 |
| 09***15 | Shim (2.0 mm Thick) | 2 |
216-0034 Rotating Gp-Pump -Hydraulic-Main Hydraulic
| 09***76 | Seal-O-Ring | 1 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***98 | Seal-O-Ring (Id=29.40mm) | 2 |
216-0028 Rotating Gp-Pump -Main Hydraulic
| 21***28 | Rotating Group-Pump; -Main Hydraulic | 1 |
| 24***81 | Flange | 6 |
| 25***37 | Valve Group-Solenoid | 5 |
283-5979 Rotating Gp-Pump -Main Hydraulic
| 21***18 | Lines Group-Grease; -Boom | 1 |
| 24***37 | Hose As | 2 |
| 28***79 | Rotating Group-Pump; -Main Hydraulic | 1 |
4i-6262 Rotor Gp-Swivel
| 24***33 | Hose As | 1 |
| 24***34 | Hose As | 1 |
| 24***35 | Hose As | 1 |
4i-6263 Rotor Gp-Swivel
| 24***35 | Hose As | 1 |
| 24***36 | Hose As | 1 |
| 25***15 | Hose As | 1 |
191-0886 Shaft Gp-Hydraulic Motor
| 19***86 | Shaft Group-Hydraulic Motor | 1 |
| 21***11 | Boom Group | 1 |
| 21***12 | Stick Group; -Felling Head | 1 |
159-5871 Swivel Gp -Without Tilt Function
| 15***71 | Swivel Group; -Without Tilt Function | 1 |
| 21***11 | Boom Group | 1 |
| 21***12 | Stick Group; -Felling Head | 1 |
272-0055 Tank Gp-Hydraulic & Fuel
| 21***97 | Valve & Mtg Group-Main Control; -7-Bank | 1 |
| 21***00 | Pump & Mtg Group-Main Hydraulic; -Felling Head | 1 |
| 22***71 | Control & Mtg Group-Joystick; -Harvester Head | 1 |
306-9323 Tube Gp-Diffuser -Hydraulic Tank
| 22***01 | Boom Group | 1 |
| 22***02 | Stick Group; -Harvester Head | 1 |
| 25***02 | Lines Group-Stick | 1 |
217-9696 Valve & Lines Gp-Travel Cont -Without Tilt Function
| 12***37 | Clip-Loop | 2 |
| 14***34 | Bolt; (M10x1.5x30-mm) | 1 |
| 21***11 | Boom Group | 1 |
256-0349 Valve & Mtg Gp-Main Control -7-Bank
| 03***38 | Clamp | 1 |
| 13***14 | Grommet | 1 |
| 17***87 | Coil As-Heater | 1 |
285-2268 Valve & Mtg Gp-Main Control -7-Bank
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 18***86 | Screw-Machine; (M4x0.7x8-mm) | 2 |
| 23***52 | Support As | 1 |
217-9697 Valve & Mtg Gp-Main Control -7-Bank
| 09***83 | Shim (1.0 mm Thick) | 4 |
| 09***15 | Shim (2.0 mm Thick) | 4 |
| 09***34 | Shim; (T=69.85mm) | 2 |
332-0965 Valve Gp-Bank 2
| 23***74 | Door Group-Access; -Air Filter | 1 |
| 23***12 | Door Group-Cab | 1 |
| 24***32 | Rops Group-Enclosed | 1 |
328-1689 Valve Gp-Bank 7
| 23***60 | Plate | 1 |
| 23***08 | Window Group-Cab; -Side | 1 |
| 23***10 | Cab Group-Enclosed Rops | 1 |
192-3284 Valve Gp-Counterbalance -Travel Motor
| 11***10 | Stud-Ball | 2 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 8 |
| 14***06 | Fastener | 15 |
194-6973 Valve Gp-Brake -Pressure Release
| 19***73 | Valve Group-Brake; -Pressure Release | 1 |
| 19***80 | Guard Group-Window | 1 |
| 23***60 | Plate | 1 |
192-3293 Valve Gp-Check & Relief -Travel Motor
| 19***93 | Valve Group-Check & Relief; -Travel Motor | 1 |
| 25***97 | Insert-Threaded | 2 |
| 28***79 | Door Group-Cab | 1 |
244-7364 Valve Gp-Control -Lateral Tilt-Hf, Rotator-Hp
| 22***16 | Control Group-Handle; -Harvester Head, Rh | 1 |
| 22***17 | Harness As-Operator Controls; (Joystick) | 1 |
| 24***64 | Valve Group-Control; -Lateral Tilt-Hf, Rotator-Hp | 1 |
227-2131 Valve Gp-Control -Travel
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***33 | Switch As-Pressure; (A/C) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
247-7010 Valve Gp-Control -Saw Motor Control
| 13***92 | Retainer-Captive | 2 |
| 17***33 | Lamp; (Red) | 1 |
| 17***31 | Screw; (Truss Head) (M4x0.7x12mm) | 2 |
227-2141 Valve Gp-Control -End Cover
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 22***39 | Control Group-Hydraulic Pedal; (Travel) | 2 |
| 22***73 | Plate | 4 |
227-2132 Valve Gp-Control -Inlet
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***00 | Clip; (Tab) | 1 |
| 13***89 | Clip; (Ladder) | 1 |
227-2133 Valve Gp-Control
| 18***84 | Cover | 1 |
| 22***33 | Valve Group-Control; -Accum Arms-Hf, Lo/Hi Flow-Hp-Grapple-Hf, High Flow-Hp | 1 |
| 24***23 | Console Group-Operator; -Lh | 1 |
333-3729 Valve Gp-Control
| 27***33 | Seal-Washer | 2 |
| 28***70 | Knob | 4 |
| 29***38 | Bracket As | 2 |
218-8376 Valve Gp-Control -Travel, 2-Bank
| 21***76 | Valve Group-Control; -Travel, 2-Bank | 1 |
| 25***97 | Insert-Threaded | 2 |
| 28***79 | Door Group-Cab | 1 |
256-0520 Valve Gp-Control -Head Tilt-Hf, Blank-Hp
| 13***02 | Washer-Nylon; (0.53x1.53x0.125-In Thk) | 2 |
| 16***49 | Bolt; (M12x1.75x60-mm) | 4 |
| 21***29 | Block | 2 |
234-0587 Valve Gp-Control -Boom
| 10***51 | Loom; (39 cm) | 0 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 17***08 | Switch As-Limit | 10 |
227-2135 Valve Gp-Control -Swing
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 5 |
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 17***30 | Ashtray | 1 |
227-2140 Valve Gp-Control -Travel
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 5 |
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 22***40 | Valve Group-Control; -Travel | 1 |
242-4240 Valve Gp-Control -Intermittent Saw, 2-Bank
| 17***08 | Switch As-Limit | 8 |
| 24***40 | Valve Group-Control; -Intermittent Saw, 2-Bank | 1 |
| 26***01 | Film-Overlay; (6-Button, 11.5-mm) | 1 |
244-7363 Valve Gp-Control -Stick
| 11***49 | Pedal Assem.; (L.H.) | 1 |
| 11***50 | Pedal Assem.; (R.H.) | 1 |
| 11***56 | Step Assem. | 2 |
338-1091 Valve Gp-Control
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 2 |
| 20***05 | Latch As | 1 |
| 32***60 | Door | 1 |
227-2137 Valve Gp-Control
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 4 |
| 18***84 | Cover | 1 |
| 22***37 | Valve Group-Control; -Felling Head Lateral Tilt | 1 |
234-0586 Valve Gp-Control
| 23***13 | Control Group-Hydraulic Pedal | 1 |
| 23***86 | Valve Group-Control; -Inlet | 1 |
| 23***22 | Plate As | 1 |
325-4351 Valve Gp-Control -Boom
| 25***38 | Hatch As | 1 |
| 27***53 | Bracket As | 2 |
| 27***33 | Seal-Washer | 1 |
247-9847 Valve Gp-Control -Inlet
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 2 |
| 20***05 | Latch As | 1 |
| 24***81 | Door As; (Louver) | 1 |
338-1090 Valve Gp-Control -Boom
| 27***33 | Seal-Washer | 6 |
| 28***70 | Knob | 4 |
| 28***53 | Seal; (26-Dm Each) | 0 |
105-8117 Valve Gp-Counterbalance -Hood Tilt Cylinder
| 10***17 | Valve Group-Counterbalance; -Hood Tilt Cylinder | 1 |
| 11***10 | Stud-Ball | 2 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 8 |
291-1122 Valve Gp-Flow Control
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 2 |
| 11***48 | Filter Element-Cab Air; (Standard Efficiency) | 1 |
| 16***74 | Louver As-Vent | 10 |
338-1089 Valve Gp-Main Control
| 24***37 | Angle As | 2 |
| 24***38 | Angle As | 1 |
| 24***39 | Angle As | 1 |
256-0500 Valve Gp-Main Control -7-Bank
| 24***20 | Plate | 2 |
| 24***34 | Angle As | 1 |
| 24***36 | Angle As | 1 |
270-3521 Valve Gp-Pump Control -Pressure Compensator-Main Hydraulic
| 27***21 | Valve Group-Pump Control; -Pressure Compensator-Main Hydraulic | 1 |
| 31***17 | Plate | 2 |
| 31***18 | Plate | 1 |
198-3811 Valve Gp-Pump Control -Pressure Compensator-Main Hydraulic
| 19***11 | Valve Group-Pump Control; -Pressure Compensator-Main Hydraulic | 1 |
| 25***48 | Window; (Center) | 1 |
| 25***50 | Window; (Left) | 1 |
308-4489 Valve Gp-Pump Control -Pressure Compensator-Main Hydraulic
| 19***90 | Angle | 1 |
| 19***91 | Guard As | 1 |
| 30***89 | Valve Group-Pump Control; -Pressure Compensator-Main Hydraulic | 1 |
319-7774 Valve Gp-Regeneration
| 12***28 | Seal; (17.2-cm Each) | 0 |
| 25***04 | Window-Roof; (Cab) | 1 |
| 25***09 | Bar | 1 |
184-3830 Valve Gp-Relief -Swing Motor
| 18***30 | Valve Group-Relief; -Swing Motor | 1 |
| 28***53 | Seal; (26-Dm Each) | 0 |
| 32***16 | Seal-Washer | 2 |
167-1555 Valve Gp-Selector & Press Cont -Boom
| 16***55 | Valve Group-Selector & Press Cont; -Pilot Oil Pressure | 1 |
| 17***12 | Cover | 1 |
| 17***13 | Housing | 1 |
276-9072 Valve Gp-Shuttle -Signal
| 10***55 | Cover-Speaker | 2 |
| 11***19 | Bolt-Socket Head; (M4x0.7x25-mm) | 8 |
| 11***54 | Cover | 1 |
116-3526 Valve Gp-Solenoid
| 11***26 | Valve Group-Solenoid; -Swing Cushion | 1 |
| 26***61 | Foam | 1 |
| 26***62 | Foam | 1 |
152-8340 Valve Gp-Solenoid
| 12***98 | Bracket Assem. | 1 |
| 14***35 | Clip | 1 |
| 15***40 | Valve Group-Solenoid; -Reversing Fan, Ride Control | 1 |
171-3685 Valve Gp-Solenoid
| 17***85 | Valve Group-Solenoid | 1 |
| 22***90 | Control & Mtg Group-Joystick; -Felling Head | 1 |
| 23***56 | Support Group-Seat | 1 |
277-8876 Valve Gp-Solenoid
| 13***90 | Bushing; (Radio Mount) | 1 |
| 14***81 | Knob-Select; (Radio) | 1 |
| 16***26 | Radio Group; (Am/Fm Cd Player) | 1 |
3e-9205 Valve Gp-Solenoid
| 25***25 | Foam | 1 |
| 26***60 | Foam | 1 |
| 26***61 | Foam | 1 |
195-3739 Valve Gp-Solenoid -Pump Control
| 12***67 | Screw; (M6x1x8-mm) | 3 |
| 13***13 | Bolt; (M10x1.5x16-mm) | 2 |
| 19***39 | Valve Group-Solenoid; -Pressure Reducing | 1 |
315-4412 Valve Gp-Solenoid
| 13***90 | Bushing; (Radio Mount) | 1 |
| 28***53 | Radio Group; -Am/Fm/Wb/Cd Player | 1 |
| 31***12 | Valve Group-Solenoid; -Fine Swing | 1 |
196-5862 Valve Gp-Solenoid & Manifold -Pump Torque Limiter Control
| 19***62 | Valve Group-Solenoid & Manifold; -Pilot Lines-Proportional Reducing | 1 |
| 22***89 | Seat Group-Suspension; -High Back, Tilt | 1 |
| 6V***02 | Bolt-Socket Head; (M8x1.25x16-mm) | 4 |
279-6518 Valve Gp-Solenoid & Manifold -Pilot Oil-Reversing Fan
| 23***20 | Seat Belt Group; -Retractable, 76-mm | 1 |
| 27***18 | Valve Group-Solenoid & Manifold; -Pilot Oil-Reversing Fan | 1 |
222-5781 Valve Gp-Solenoid & Manifold -Disc Saw
| 22***81 | Valve Group-Solenoid & Manifold; -Disc Saw | 1 |
| 24***62 | Seat Group-Suspension; -Air Susp, High Back, Tilt | 1 |
| 6V***02 | Bolt-Socket Head; (M8x1.25x16-mm) | 4 |
274-8742 Valve Gp-Solenoid & Manifold -Pilot Oil-Reversing Fan
| 27***42 | Valve Group-Solenoid & Manifold; -Pilot Oil-Reversing Fan | 1 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
| 8S***23 | Bolt; (7/16-20x1.5-In) | 1 |
322-8716 Valve Gp-Swing Cushion
| 23***20 | Seat Belt Group; -Retractable, 76-mm | 1 |
| 24***03 | Seat & Mounting Group; -High Back, Tilt | 1 |
| 32***16 | Valve Group-Swing Cushion; -Fine Swing | 1 |
158-9090 Valve Gp-Swing Cushion -Fine Swing
| 15***90 | Valve Group-Swing Cushion; -Fine Swing | 1 |
| 17***59 | Handle; (Lumbar Support Adjuster) | 1 |
| 22***94 | Headrest As-Seat; -Cloth | 1 |
Implements
348-7173 Boom Gp
| 23***57 | Support As | 1 |
| 34***73 | Boom Group | 1 |
| 7X***29 | Washer; (11x25x3-mm Thk) | 4 |
226-5001 Boom Gp
| 22***01 | Boom Group | 1 |
| 22***90 | Seat Group; -High Back, Tilt | 1 |
| 24***63 | Protector, Suspension Group-Seat; -Air | 1 |
212-8011 Boom Gp
| 21***11 | Boom Group | 1 |
| 22***77 | Suspension Group-Seat; -Mechanical | 1 |
| 22***90 | Seat Group; -High Back, Tilt | 1 |
253-2605 Lines Gp-Grease -Boom, Stick
| 13***30 | Hinge-Lh | 2 |
| 15***15 | Gasket | 1 |
| 19***87 | Frame As-Lower | 1 |
218-1918 Lines Gp-Grease -Boom
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 4 |
| 21***18 | Lines Group-Grease; -Boom | 1 |
| 22***64 | Handle As | 1 |
218-1917 Lines Gp-Grease -Boom, Stick
| 14***21 | Kit-Clip; (Seat) | 1 |
| 21***17 | Lines Group-Grease; -Boom, Stick | 1 |
| 24***68 | Cover As | 1 |
212-8010 Linkage Ar-Felling Head
| 19***92 | Window Group-Cab; -Lh | 1 |
| 21***10 | Linkage Ar-Felling Head | 1 |
| 23***86 | Window; (Left Side, Front, Upper) | 1 |
282-3069 Linkage Ar-Felling Head
| 28***69 | Linkage Ar-Felling Head | 1 |
252-8713 Linkage Ar-Harvester Head
| 25***13 | Linkage Ar-Harvester Head | 1 |
282-3012 Linkage Ar-Harvester Head
| 28***12 | Linkage Ar-Harvester Head | 1 |
252-8717 Linkage Ar-Intermittent Saw
| 25***17 | Linkage Ar-Intermittent Saw | 1 |
284-5617 Linkage Ar-Intermittent Saw
| 28***17 | Linkage Ar-Intermittent Saw | 1 |
212-8014 Linkage Gp-Felling Head
| 21***14 | Linkage Group-Felling Head | 1 |
347-6972 Stick Gp
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
| 25***61 | Film-Information; (Cat Power, Acert Technology) | 2 |
| 25***68 | Film-Information; (Weight Limit, Platform) | 1 |
226-5002 Stick Gp -Harvester Head
| 11***95 | Film-Instruction; (Air Conditioner) | 1 |
| 12***80 | Film-Instruction; (Hydraulic Tank Oil Drain) | 1 |
| 13***59 | Plate-Identification; (Engine Stop, Run) | 1 |
212-8012 Stick Gp -Felling Head
| 21***12 | Stick Group; -Felling Head | 1 |
Lubrication System
226-3560 Filler Gp-Engine Oil
| 03***34 | Seal-O-Ring | 1 |
| 19***52 | Gasket | 1 |
| 20***82 | Bolt; (M8x1.25x25-mm) | 2 |
220-1998 Filter Gp-Engine Oil
| 18***99 | Connector As | 1 |
| 18***04 | Elbow As; (90 Degree) | 1 |
| 19***19 | Gasket; (Coated Metal) | 1 |
226-3559 Fumes Disposal Gp
| 21***22 | Pump As-Engine Oil | 1 |
| 21***46 | Gerotor Pump Group | 1 |
| 22***44 | Gear Assem.; (60 Teeth) | 1 |
219-9960 Gauge Gp-Oil Level (Dipstick) -Engine
| 20***93 | Gasket | 1 |
| 21***60 | Gauge Group-Oil Level (Dipstick); -Engine | 1 |
| 29***67 | Core As-Oil Cooler; (Engine) | 1 |
202-6603 Lines Gp-Engine Oil
| 20***03 | Lines Group-Engine Oil | 1 |
| 21***62 | Radiator & Mounting Group | 1 |
| 21***63 | Lines Group-Cooling; -Rad, Aftercooler, Hydraulic Cooler | 1 |
165-4465 Lines Gp-Turbocharger Oil
| 14***38 | Adapter, -6 Orb / Orfs X-Long | 2 |
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 2 |
| 16***70 | Connector As | 2 |
195-8098 Pump Gp-Engine Oil
| 11***73 | Bolt-12 Point Head; (M10x1.5x35-mm) | 4 |
| 13***40 | Spider As-Fan; (8-Blade) | 1 |
| 19***55 | Belt-Serpentine; (Fan Drive) | 1 |
Machine Arrangement
272-0051 Chassis Ar
| 21***00 | Installation Ar-Engine | 1 |
| 21***60 | Cooling Ar | 1 |
| 21***82 | Undercarriage Ar; -Without Tilt Function | 1 |
319-6600 Cold Weather Ar
| 21***97 | Valve & Mtg Group-Main Control; -7-Bank | 1 |
| 21***00 | Pump & Mtg Group-Main Hydraulic; -Felling Head | 1 |
| 26***30 | Film-Instruction; (Joystick Control, Pattern 1) | 1 |
272-0048 Common Ar
| 21***97 | Valve & Mtg Group-Main Control; -7-Bank | 1 |
| 26***30 | Film-Instruction; (Joystick Control, Pattern 1) | 1 |
| 27***48 | Common Ar | 1 |
293-0200 Conversion Ar-Machine
| 11***86 | Flywheel Group | 1 |
| 11***94 | Fastener Group-Flywheel; (Flywheel) | 1 |
| 11***27 | Cover Group-Front Housing; -Accessory Drive | 1 |
242-5335 Conversion Ar-Machine -Without Front Linkage
| 11***34 | Tee-O-Ring | 1 |
| 16***72 | Tee As | 1 |
| 24***35 | Conversion Ar-Machine; -Without Front Linkage | 1 |
293-0189 Parts Gp-Miscellaneous
| 16***48 | Crankshaft Group | 1 |
| 18***26 | Cooler Group-Engine Oil | 1 |
| 19***98 | Pump Group-Engine Oil; (Engine Oil) | 1 |
293-0188 Special Ar -Includes Swing Gear, Bearing
| 21***55 | Mounting Group-Engine | 1 |
| 21***56 | Air Cleaner Group; -With Precleaner | 1 |
| 21***57 | Muffler Group | 1 |
Operator Station
245-7896 Adjuster Gp-Seat -Lower Slide
| 24***96 | Adjuster Group-Seat; -Lower Slide | 1 |
245-7889 Adjuster Gp-Seat -Upper Slide
| 24***89 | Adjuster Group-Seat; -Upper Slide | 1 |
243-6303 Air Conditioner & Mounting Gp
| 24***03 | Air Conditioner & Mounting Group | 1 |
250-0398 Air Conditioner Gp
| 25***98 | Air Conditioner Group | 1 |
243-6304 Air Conditioner Gp
| 24***04 | Air Conditioner Group | 1 |
238-1027 Air Conditioner Gp
| 23***27 | Air Conditioner Group | 1 |
259-7347 Armrest Gp -Lh
| 25***47 | Armrest Group; -Lh | 1 |
234-6607 Armrest Gp -Lh
| 23***07 | Armrest Group; -Lh | 1 |
259-7346 Armrest Gp -Rh
| 25***46 | Armrest Group; -Rh | 1 |
234-6606 Armrest Gp -Rh
| 23***06 | Armrest Group; -Rh | 1 |
238-5010 Cab Gp-Enclosed Rops
| 23***10 | Cab Group-Enclosed Rops | 1 |
320-7458 Cab Gp-Enclosed Rops
| 32***58 | Cab Group-Enclosed Rops | 1 |
238-5013 Cab Gp-Enclosed Rops
| 23***13 | Cab Group-Enclosed Rops | 1 |
320-7457 Cab Gp-Enclosed Rops
| 32***57 | Cab Group-Enclosed Rops | 1 |
246-7154 Case Gp-Air Conditioner
| 24***54 | Case Group-Air Conditioner | 1 |
226-3561 Compressor Gp-Refrigerant
| 22***61 | Compressor Group-Refrigerant | 1 |
245-7924 Console Gp-Operator -Rh
| 24***24 | Console Group-Operator; -Rh | 1 |
243-5686 Console Gp-Operator
| 24***86 | Console Group-Operator | 1 |
245-7923 Console Gp-Operator -Lh
| 24***23 | Console Group-Operator; -Lh | 1 |
259-7348 Console Gp-Operator -Rh
| 25***48 | Console Group-Operator; -Rh | 1 |
259-7349 Console Gp-Operator -Lh
| 25***49 | Console Group-Operator; -Lh | 1 |
223-0671 Control & Mtg Gp-Joystick -Harvester Head
| 22***71 | Control & Mtg Group-Joystick; -Harvester Head | 1 |
224-4990 Control & Mtg Gp-Joystick -Felling Head
| 22***90 | Control & Mtg Group-Joystick; -Felling Head | 1 |
238-8167 Control & Mtg Gp-Pedal
| 23***67 | Control & Mtg Group-Pedal | 1 |
223-0716 Control Gp-Handle -Harvester Head, Rh
| 22***16 | Control Group-Handle; -Harvester Head, Rh | 1 |
223-0715 Control Gp-Handle -Harvester Head, Lh
| 22***15 | Control Group-Handle; -Harvester Head, Lh | 1 |
235-4122 Control Gp-Handle -Felling Head
| 23***22 | Control Group-Handle; -Felling Head | 1 |
231-2613 Control Gp-Hydraulic Pedal
| 23***13 | Control Group-Hydraulic Pedal | 1 |
283-2394 Control Gp-Joystick -Harvester Head, Lh
| 28***94 | Control Group-Joystick; -Harvester Head, Lh | 1 |
283-2393 Control Gp-Joystick -Felling Head
| 28***93 | Control Group-Joystick; -Felling Head | 1 |
283-2395 Control Gp-Joystick -Harvester Head, Rh
| 28***95 | Control Group-Joystick; -Harvester Head, Rh | 1 |
319-6719 Control Gp-Monitor -Iqan
| 31***19 | Control Group-Monitor; -Iqan | 1 |
272-0446 Control Gp-Monitor -Iqan
| 27***46 | Control Group-Monitor; -Iqan | 1 |
298-1567 Door Gp-Access -Cab Roof
| 29***67 | Door Group-Access; -Cab Roof | 1 |
256-1296 Door Gp-Access -Cab Roof
| 25***96 | Door Group-Access; -Cab Roof | 1 |
256-7304 Door Gp-Access -Cab Roof
| 25***04 | Door Group-Access; -Cab Roof | 1 |
320-7459 Door Gp-Access -Cab Air Filter
| 32***59 | Door Group-Access; -Cab Air Filter | 1 |
237-2374 Door Gp-Access -Air Filter
| 23***74 | Door Group-Access; -Air Filter | 1 |
238-5012 Door Gp-Cab
| 23***12 | Door Group-Cab | 1 |
282-2679 Door Gp-Cab
| 28***79 | Door Group-Cab | 1 |
334-1077 Door Gp-Cab
| 33***77 | Door Group-Cab | 1 |
239-1378 Duct Gp-Cab Air
| 23***78 | Duct Group-Air | 1 |
321-3821 Frame Gp-Window
| 32***21 | Frame Group-Window | 1 |
258-0699 Frame Gp-Window -Thick Glass
| 25***99 | Frame Group-Window; -Thick Glass | 1 |
250-0861 Frame Gp-Window
| 25***61 | Frame Group-Window | 1 |
197-9880 Guard Gp-Window
| 19***80 | Guard Group-Window | 1 |
329-5158 Hatch Gp-Roof
| 32***58 | Hatch Group-Roof | 1 |
253-9594 Hatch Gp-Roof
| 25***94 | Hatch Group-Roof | 1 |
323-2220 Hatch Gp-Roof
| 32***20 | Hatch Group-Roof | 1 |
251-6761 Housing Gp-Air Conditioner -Outlet Air
| 25***61 | Housing Group-Air Conditioner; -Outlet Air | 1 |
238-5024 Installation Gp-Radio
| 23***24 | Installation Group-Radio | 1 |
263-2766 Liner Gp-Cab
| 26***66 | Liner Group-Cab | 1 |
340-5084 Liner Gp-Cab
| 34***84 | Liner Group-Cab | 1 |
325-8562 Liner Gp-Cab
| 32***62 | Liner Group-Cab | 1 |
261-1090 Lines Gp-Air Conditioner
| 26***90 | Lines Group-Air Conditioner | 1 |
251-6137 Mounting Gp-Cab
| 25***37 | Mounting Group-Cab | 1 |
282-2698 Operator Ar
| 28***98 | Operator Ar | 1 |
238-5004 Operator Ar
| 23***04 | Operator Ar | 1 |
238-5020 Platform Gp-Operator
| 23***20 | Platform Group-Operator | 1 |
285-2371 Radio Gp -Am/Fm Cassette, Cd Changer
| 28***71 | Return Pipe, Radio Group; -Am/Fm Cassette, Cd Changer | 1 |
349-7701 Radio Gp -Am/Fm/Wb/Cd
| 34***01 | Radio Group; -Am/Fm/Wb/Cd | 1 |
284-8953 Radio Gp -Am/Fm/Wb/Cd Player
| 28***53 | Radio Group; -Am/Fm/Wb/Cd Player | 1 |
240-5061 Seat & Mounting Gp -Air Suspension
| 24***61 | Seat & Mounting Group; -Air Susp, High Back, Tilt | 1 |
240-5003 Seat & Mounting Gp -High Back, Tilt
| 24***03 | Seat & Mounting Group; -High Back, Tilt | 1 |
235-9020 Seat Belt Gp -Retractable, 3-In
| 23***20 | Seat Belt Group; -Retractable, 76-mm | 1 |
240-5039 Seat Belt Gp
| 24***39 | Seat Belt Group; -Retractable, 76-mm | 1 |
242-3122 Seat & Mounting Gp -High Back, Tilt
| 24***22 | Seat Group; -High Back, Tilt | 1 |
229-9090 Seat Gp -High Back, Tilt
| 22***90 | Seat Group; -High Back, Tilt | 1 |
240-5062 Seat Gp-Suspension -Air
| 24***62 | Seat Group-Suspension; -Air Susp, High Back, Tilt | 1 |
229-9089 Seat Gp-Suspension -High Back, Tilt
| 22***89 | Seat Group-Suspension; -High Back, Tilt | 1 |
235-8856 Support Gp-Seat
| 23***56 | Support Group-Seat | 1 |
229-9077 Suspension Gp-Seat
| 22***77 | Suspension Group-Seat; -Mechanical | 1 |
245-7892 Suspension Gp-Seat
| 24***92 | Suspension Group-Seat; -Mechanical | 1 |
240-5063 Suspension Gp-Seat -Air
| 24***63 | Protector, Suspension Group-Seat; -Air | 1 |
273-5384 Suspension Gp-Seat -Air
| 27***84 | Suspension Group-Seat; -Air | 1 |
340-5085 Trim Gp-Cab
| 34***85 | Trim Group-Cab | 1 |
320-7473 Trim Gp-Cab
| 32***73 | Trim Group-Cab | 1 |
238-5025 Trim Gp-Cab
| 23***25 | Trim Group-Cab | 1 |
196-2392 Window Gp-Cab -Lh
| 19***92 | Window Group-Cab; -Lh | 1 |
238-5008 Window Gp-Cab -Side
| 23***08 | Window Group-Cab; -Side | 1 |
317-3155 Window Gp-Cab -Lh
| 31***55 | Window Group-Cab; -Lh | 1 |
321-3822 Window Gp-Cab
| 32***22 | Window Group-Cab | 1 |
266-3093 Window Gp-Cab -Front
| 26***93 | Window Group-Cab; -Front | 1 |
Power Train
318-9121 Drive Gp-Final
| 10***76 | Support As | 1 |
| 10***80 | Spring | 1 |
| 10***81 | Support | 1 |
165-6209 Final Drive & Brake Gp
| 16***09 | Final Drive & Brake Group | 1 |
| 25***95 | Roller Group-Track-Single Flange | 4 |
| 28***75 | Track Group; -Rh | 1 |
279-9869 Final Drive Gp
| 20***64 | Roller Group-Track-Single Flange | 1 |
| 27***69 | Final Drive Group | 1 |
185-0672 Sprocket Gp
| 18***72 | Sprocket Group | 1 |
| 1S***60 | Nut-Track; (3/4-16-Thd) | 196 |
| 20***97 | Shoe-Track | 49 |
Service Equipment And Supplies
279-3457 Film-Instruction -Joystick Control, Pattern 7
| 27***57 | Film-Instruction; -Joystick Control, Pattern 7 | 1 |
279-3454 Film-Instruction -Joystick Control, Pattern 4
| 27***54 | Film-Instruction; -Joystick Control, Pattern 4 | 1 |
279-3455 Film-Instruction -Joystick Control, Pattern 5
| 27***55 | Film-Instruction; -Joystick Control, Pattern 5 | 1 |
269-5492 Film-Instruction -Joystick Control, Pattern 7
| 26***92 | Film-Instruction; -Joystick Control, Pattern 7 | 1 |
269-5488 Film-Instruction -Joystick Control, Pattern 3
| 26***88 | Film-Instruction; -Joystick Control, Pattern 3 | 1 |
259-1068 Film-Instruction -Joystick Control, Pattern 1
| 25***68 | Film-Instruction; -Joystick Control, Pattern 1 | 1 |
279-3452 Film-Instruction -Joystick Control, Pattern 2
| 27***52 | Film-Instruction; -Joystick Control, Pattern 2 | 1 |
269-5490 Film-Instruction -Joystick Control, Pattern 5
| 26***90 | Film-Instruction; -Joystick Control, Pattern 5 | 1 |
279-3453 Film-Instruction -Joystick Control, Pattern 3
| 27***53 | Film-Instruction; -Joystick Control, Pattern 3 | 1 |
269-5775 Film-Instruction -Joystick Control, Pattern 2
| 26***75 | Film-Instruction; -Joystick Control, Pattern 2 | 1 |
269-5491 Film-Instruction -Joystick Control, Pattern 6
| 26***91 | Film-Instruction; -Joystick Control, Pattern 6 | 1 |
269-5489 Film-Instruction -Joystick Control, Pattern 4
| 26***89 | Film-Instruction; -Joystick Control, Pattern 4 | 1 |
279-3456 Film-Instruction -Joystick Control, Pattern 6
| 27***56 | Film-Instruction; -Joystick Control, Pattern 6 | 1 |
285-5316 Plate & Film Gp
| 28***16 | Plate & Film Group | 1 |
286-9990 Plate & Film Gp
| 28***90 | Plate & Film Group | 1 |
Undercarriage
224-9939 Frame Gp-Undercarriage
| 20***08 | Drive Group-Swing | 1 |
| 20***13 | Motor & Mtg Group-Swing | 1 |
| 22***39 | Frame Group-Undercarriage | 1 |
207-4492 Guard Gp-Travel Motor
| 20***08 | Drive Group-Swing | 1 |
| 20***92 | Guard Group-Travel Motor | 1 |
| 28***04 | Motor & Mtg Group-Swing | 1 |
207-0469 Idler Gp-Front
| 09***84 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
| 09***96 | Seal-O-Ring (Id=28.70mm) | 1 |
185-0671 Idler Gp-Front
| 18***71 | Idler Group-Front | 1 |
| 18***84 | Filter & Valve Group-Pilot; -Hydraulic Oil | 1 |
| 28***36 | Filter & Valve Group-Pilot; -Hydraulic Oil | 1 |
207-0470 Idler Gp-Front
| 09***84 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
| 09***96 | Seal-O-Ring (Id=28.70mm) | 1 |
269-7858 Link As-Track -Grease Lubricated Track
| 09***84 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
| 09***96 | Seal-O-Ring (Id=28.70mm) | 1 |
336-7736 Roller Ar-Track -Star
| 1A***35 | Bolt 2.00 In. (5.08 cm) Long | 4 |
| 1R***92 | Filter Element As-Oil; (Advanced Efficiency) | 3 |
| 2S***78 | Seal-O-Ring (Id=37.47mm) | 1 |
336-7735 Roller Ar-Track -Carrier Roller
| 09***21 | Filter-Oil; (Advanced Efficiency)(Hydraulic, Case Drain) | 1 |
| 12***76 | Base As; (Oil Filter) | 1 |
| 33***35 | Roller Ar-Track; -Carrier Roller | 1 |
228-6415 Roller Ar-Track & Carrier
| 09***21 | Filter-Oil; (Advanced Efficiency)(Hydraulic, Case Drain) | 1 |
| 22***15 | Roller Ar-Track & Carrier | 1 |
| 28***95 | Head As-Filter | 1 |
206-1263 Roller Gp-Track-Double Flange
| 09***19 | Seal-O-Ring (Id=15.80mm) | 4 |
| 20***63 | Roller Group-Track-Double Flange | 1 |
| 23***57 | Pipe | 1 |
247-0565 Roller Gp-Track-Single Flange
| 12***94 | Plug; (Break Off) | 1 |
| 12***17 | Plug | 1 |
| 12***62 | Seal-O-Ring | 2 |
254-4095 Roller Gp-Track-Single Flange
| 12***94 | Plug; (Break Off) | 1 |
| 12***17 | Plug | 1 |
| 12***84 | Pin; (Threaded) | 2 |
206-1264 Roller Gp-Track-Single Flange
| 08***59 | Plug As | 1 |
| 09***32 | Bolt-Socket Head; (M12x1.75x95-mm) | 2 |
| 09***04 | Bolt-Socket Head; (M12x1.75x110-mm) | 4 |
101-7875 Spring Gp-Recoil
| 10***75 | Spring Group-Recoil | 1 |
| 21***89 | Drive Ar-Swing | 1 |
| 21***90 | Pump & Lines Group-Hydraulic Tank Fill | 1 |
102-8109 Adjustment Gp-Hydraulic Track
| 09***30 | Ring; (Retaining) | 2 |
| 09***31 | Ring - Retaining | 1 |
| 09***57 | Gauge-Oil Level (Dipstick) | 1 |
288-0602 Track Ar
| 21***89 | Drive Ar-Swing | 1 |
| 21***90 | Pump & Lines Group-Hydraulic Tank Fill | 1 |
| 21***92 | Lines Group-Return | 1 |
287-8275 Track Gp -Rh
| 14***55 | Union As | 22 |
| 15***26 | Union Assembly | 2 |
| 20***29 | Tag-Identification; (Saw Oil Drain) | 2 |
269-7860 Track Gp -2-Required
| 21***97 | Valve & Mtg Group-Main Control; -7-Bank | 1 |
| 21***00 | Pump & Mtg Group-Main Hydraulic; -Felling Head | 1 |
| 22***71 | Control & Mtg Group-Joystick; -Harvester Head | 1 |
269-7859 Track Gp -2-Required
| 21***00 | Pump & Mtg Group-Main Hydraulic; -Felling Head | 1 |
| 25***50 | Lines Group-Saw | 1 |
| 25***68 | Film-Instruction; -Joystick Control, Pattern 1 | 1 |
269-7861 Track Gp -2-Required
| 21***97 | Valve & Mtg Group-Main Control; -7-Bank | 1 |
| 22***71 | Control & Mtg Group-Joystick; -Harvester Head | 1 |
| 26***61 | Track Group; -2-Required | 1 |
269-7862 Track Gp -2-Required
| 21***30 | Kit-Seal; (Control Valve) | 1 |
| 26***62 | Track Group; -2-Required | 1 |
287-8276 Track Gp -Lh
| 11***60 | Union | 1 |
| 14***55 | Union As | 8 |
| 15***26 | Union Assembly | 4 |
219-4800 Undercarriage Ar
| 21***00 | Undercarriage Ar | 1 |
| 28***01 | Lines Group-Front; -Boom, Stick | 1 |
| 28***02 | Lines Group-Front; -Boom, Felling Head | 1 |
219-4782 Undercarriage Ar -Without Tilt Function
| 10***77 | Bolt-Socket Head; (M10x1.5x45-mm) | 4 |
| 15***62 | Union As | 1 |
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 13 |
219-4802 Undercarriage Ar
| 03***57 | Washer; (13x26x6-mm Thk) | 4 |
| 10***77 | Bolt-Socket Head; (M10x1.5x45-mm) | 4 |
| 15***62 | Union As | 1 |
219-4801 Undercarriage Ar
| 03***57 | Washer; (13x26x6-mm Thk) | 4 |
| 10***77 | Bolt-Socket Head; (M10x1.5x45-mm) | 4 |
| 14***27 | Connector Group | 3 |
239-1304 Undercarriage Ar
| 14***27 | Connector Group | 3 |
| 14***31 | Tee Group | 1 |
| 15***36 | Reducer As | 1 |
521 serial number reference
On Cat track feller bunchers the PIN plate sits on the machine frame/carbody, typically low on the right-hand side near the undercarriage or frame rail rather than in the cab. Check there first, and separately note any plate on the engine itself, since 521B engine serial numbers run on their own THX/TXD ranges distinct from the machine's F7B chassis PIN. Read the first three characters as the serial prefix (identifies model or engine arrangement) and the digits that follow as the sequential unit number within that prefix.
| Prefix | Identifies | Notes |
|---|---|---|
| 521 | 521 Track Feller Buncher — first generation | Machine PIN range 52100001-Up. The bare model number forms the prefix instead of a 3-letter alpha code, an exception to the usual Cat convention seen on this forestry line. Cat parts documentation for this range identifies the engine as the C-9 diesel, rated 196 kW (262 hp) at 2100 rpm. Production sits ahead of the B-series update, roughly mid-2000s. Verify the exact prefix format against the physical PIN plate since it departs from the standard 3-letter scheme, and confirm engine arrangement with your dealer since the ACERT designation for this specific range is not fully settled. |
| F7B | 521B Track Feller Buncher — zero tail swing (ZTS) second generation | Machine chassis PIN range F7B1-Up. Zero-tail-swing carbody with track-frame welded to the carbody, fixed gauge. Cat parts documentation for this range ties F7B directly to machine-level assemblies (cooling fan, etc.), confirming it as the chassis PIN rather than an engine ID. Engine is the Cat C9 ACERT, gross rated 226 kW (303 hp). Current-generation model, offered by dealers well into the 2010s. |
| THX | 521B (F7B chassis) — C9 ACERT engine serial range, first arrangement | Engine serial-number prefix documented in the 521B parts book (e.g. belt tensioner group), covering THX1 through THX38526, with a running change at THX38527-Up. This is the engine ID, not the machine PIN — the machine PIN for the same units is F7B. Treat with care: THX is a shared Cat C9 engine-serial pool also seen on other C9-powered Cat machines at separate, non-overlapping sub-ranges, so the prefix alone does not confirm a 521B — the specific sub-range does. Confirm against the machine PIN with your dealer before ordering engine parts. |
| TXD | 521B (F7B chassis) — C9 ACERT engine serial range, alternate arrangement | Alternate engine serial-number prefix (TXD1-Up) documented alongside THX in the same 521B parts book, identifying a second C9 ACERT engine arrangement rather than the machine chassis PIN. Like THX, TXD is a Cat C9 engine-serial prefix also used on other C9-equipped Cat machines at different sub-ranges, so confirm with your dealer which engine arrangement applies to a specific unit before ordering. |
Frequently asked questions
What engine powers the Cat 521 forestry machine?
Both series use the Cat C9 ACERT diesel. The base 521 (through 2012) is rated 284 hp gross / 263 hp net. The 521B (from December 2012) carries an updated tune of the same C9 ACERT rated 303 hp gross / 282 hp net.
What is the operating weight of the Cat 521?
Operating weight runs roughly 26,000 to 27,500 kg (57,000 to 62,000 lb), varying by series, feller-buncher versus harvester configuration, and which felling head is fitted. Treat any single published figure as configuration-dependent.
What replaced the Cat 521?
Caterpillar replaced the base 521 with the zero-tail-swing 521B starting December 2012, adding a heavier D7-class undercarriage and more engine power. No further successor to the 521B has been formally announced; it remains Caterpillar's current model in this size class within the 511/521/522/532 forestry family.
What 521 owners discuss
How does the 521B's powertrain and hydraulic package hold up in daily forestry duty?
The C9 ACERT engine paired with dual variable-displacement pumps is regarded as one of the sturdier setups in the mid-size zero-tail-swing class. Travel and implement functions run off separate pumps, and hot saw or intermittent-saw attachments get their own dedicated pump so saw speed does not bog down when the machine travels or the boom works. Saw wander or stall under a heavy bite is usually traced to low saw-circuit charge pressure or a weak accumulator, not the main pump. Have your dealer verify saw-circuit charge pressure and accumulator precharge if the saw feels lazy or stalls under load.
What undercarriage wear patterns are typical, and how does the 521B undercarriage differ from the base 521?
The 521B moved to larger, 330-class undercarriage components and a welded track-frame-to-carbody design at a fixed gauge, cutting flex and stretching roller and link life compared with the original 521. Buyers can spec standard single-flange carrier rollers for moderate terrain and warm climates, or star carrier rollers for severe terrain and cold climate work; match the spec to the machine's actual working ground, not the sale price. Cross-slope cutting and high-torque travel wear rollers and links faster than flat-ground excavator duty. A weeping roller or idler seal is treated as an immediate pull-and-inspect item, since running on a leaking seal is what turns a seal job into a bearing failure.
What engine quirks show up across the 511/521/522/532 C9 and C9 ACERT lineup?
The first-generation 521 (C-9) and the 521B (C9 ACERT) share the same HEUI-fueled architecture, so most engine complaints carry across the family regardless of series letter. The most repeated field failure is guide springs on the valve lifter assemblies breaking, letting the lifter walk and hammering the cam lobe. Caterpillar's own service bulletin covers this on C9 and the related C9.3 family and calls for an updated guide-spring design during any top-end repair. This can go from a valve-train tick to a scored camshaft within a few hundred hours. Have your dealer verify guide-spring condition at every valve-lash service instead of waiting for a noise complaint.
What electrical or sensor issues get reported most on these machines?
Intermittent boost-pressure and fuel-pressure sensor faults are the top electrical complaint on C9 ACERT installations. The buncher's ECM strategy matches the on-highway and industrial C9, so the same failure modes carry over. Typical pattern: full power for about a minute after startup, then a derate, a long cool-down, then the cycle repeats. Owners often replace the sensor first, but connector corrosion or an intermittent ground is at least as common a root cause. Standard fix path: clean and inspect the pressure transducer connectors, log live sensor data through a full duty cycle instead of relying on stored fault codes, then replace the sensor only once wiring and grounds check out clean.
Any other hydraulic or service-interval quirks worth knowing?
Factory hydraulic oil change interval is 2000 hours, extendable to 4000 hours only if the machine runs Cat's extended-life hydraulic fluid and gets oil sampled at the 500-hour checkpoints. Skipping the sampling and running to 4000 hours anyway is the shortcut that shows up later as varnished valves and slow function response. Engine oil interval is rated at 500 hours, but severe-duty forestry cycles (dust, sustained high load) push some operators back to a 250-hour interval, using S.O.S trend data to decide whether the longer interval is safe for that specific machine and duty cycle.
What should a buyer check on a used 521 or 521B before purchase?
Pull maintenance and oil-sample history if it exists; these machines rarely see light duty, and gaps in the record usually mean gaps in care. Check every track roller and idler for weeping seals and heat staining, the tell for bearing damage already underway. Inspect the boom, felling-head mount, and accumulator-arm pivots for stress cracking or built-up weld repair, common on high-cycle machines. Confirm the saw or shear head installed actually matches the carrier's hydraulic circuit sizing, since hot saw, disc saw, and shear heads draw different flow. Run the saw or shear function under a real load, not just at idle, to expose a lazy dedicated pump or a weak accumulator before it becomes the new owner's problem. Given the rotating mass and stored hydraulic energy in the felling head, have your dealer verify saw or shear hydraulic integrity and structural welds before the machine goes back into production cutting.
How do owners describe the differences among the 511, 521, 522, and 532 within this family?
The four models are treated as one scaled hydraulic and electrical platform rather than four distinct designs. The 511 and 521 use integrated, welded track guards; the larger 522 and 532 move to bolt-on guards, reflecting their heavier-duty positioning. Buyers cross-shopping within the family are told to pick by tree size and ground conditions rather than model number: the 521 covers small to large timber in a genuinely zero-tail-swing footprint, while the 522 and 532 step up saw or shear capacity and reach for bigger stems. Attachment and hydraulic circuit sizing differ by model, so matching head weight and flow requirement to the specific carrier matters more than the badge on the door.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 521 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.