Caterpillarexcavatormining excavator
Caterpillar 5110B
Maintenance schedule, common problems & OEM parts breakdown
The Cat 5110B is a large mass-excavation and mining-class hydraulic excavator in the 125,000-129,000 kg (275,000-284,000 lb) operating weight class, the exact figure depending on undercarriage and bucket configuration. Power comes from Cat's own 3412E HEUI diesel: a 12-cylinder V-configuration engine in two banks of six, air-to-air aftercooled, dual turbocharged, dual exhaust, rated 565 kW (758 hp) gross and 519 kW (696 hp) net. It entered production in the late 1990s, with base AAA-prefix units dating from 1999, as the mid-size entry in Cat's 5000-series big-iron excavator line, sitting between the smaller 5090B and the larger 5130B and 5230, and it stayed in the catalog until Cat retired the whole 5000 series in 2006. Cat sold it in three configurations off one base machine: the AAA standard mass-excavation unit, the AAT material handler with an added auxiliary high-pressure hydraulic circuit for hammers, shears, and other tool work, and the AAK long-undercarriage (L) version with an extended undercarriage and longer boom-and-stick options for added reach and stability.
The 5110B did not fork into distinct sub-generations the way some Cat lines did - the differences across the run are configuration, not generation, with standard, long-undercarriage, and material-handler variants all sharing the same 3412E engine, structures, and drivetrain. When Cat discontinued the 5000 series in 2006 there was no direct factory replacement for close to a decade; Cat then revived the class in 2015 with the 6015B hydraulic shovel, built explicitly on the 5110B's proven structures and undercarriage design. In the used and parts market today the 5110B still turns up in mining and heavy quarry fleets running well past its original service life, valued for a rugged, mechanically straightforward HEUI-injected engine and structures that predate current Tier 4 emissions hardware. Parts support leans on the shared 3412E engine family and Cat's standard drivetrain components, so sourcing for driveline and structural wear items stays realistic even though the machine itself is long out of production.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 5110B specifications
Engine
| Engine model | Cat 3412E HEUI (hydraulically actuated, electronically controlled unit injection) |
| Gross power | 565 kW (758 hp) |
| Net power | 519 kW (696 hp) |
| Displacement | 27 L (1649 in³) |
| Cylinders | 12-cylinder, two banks of six, four-stroke, air-to-air aftercooled, dual turbocharged, dual exhaust |
| Bore x stroke | 137 mm x 152 mm (5.4 in x 6.0 in) |
| Emissions tier | Not documented in sourced material for this model/serial range - verify with dealer |
Weights
| Operating weight - standard (ME) undercarriage | 125,000-127,000 kg (275,000-280,000 lb) - varies by source/bucket configuration |
| Operating weight - long (GP) undercarriage | 129,000 kg (284,000 lb) |
| Ground pressure - rock shoes | 147 kPa (21.4 psi) |
| Ground pressure - general purpose shoes | 116 kPa (16.8 psi) |
| Ground pressure - soft underfoot/swamp shoes | 105 kPa (15.2 psi) |
| Heaviest shipping module (chassis, carbody, cab) | approx. 42,700 kg (94,200 lb) standard undercarriage; 43,300 kg (95,390 lb) long undercarriage with tall cab riser and heavy-lift |
Dimensions
| Overall transport height | 4806 mm (15.8 ft) |
| Overall transport width | 5460 mm (17.9 ft) |
| Overall length - standard undercarriage | 8552 mm (28.1 ft) |
| Overall length - long undercarriage | 8792 mm (28.9 ft) |
| Tail swing radius | 5120 mm (16.8 ft) |
| Track shoe width - standard (ME) undercarriage | 700 mm (28 in) |
| Track shoe width - long (GP) undercarriage | 900 mm (35 in) |
| Ground clearance | 1052 mm (3.5 ft) |
| Track gauge width | 4100 mm (13.4 ft) |
| Undercarriage/track length on ground - standard | 5452 mm (17.9 ft) |
| Undercarriage/track length on ground - long | 5850 mm (19.2 ft) |
| Width to outside of tracks | 4800 mm (15.75 ft) |
Performance
| Maximum digging depth | 7.9 m (25.9 ft) with 3.4 m std stick, up to 11.51 m (37.8 ft) with 5.5 m stick on long/GP boom configuration - varies by stick/boom setup |
| Maximum reach at ground level | 13.5 m (44.2 ft) std configuration, up to 17.13 m (56.2 ft) on longest GP stick configuration |
| Maximum digging height | 13.2 m (43.2 ft) std configuration, up to 15.7 m (51.5 ft) on longest GP stick configuration |
| Maximum dumping height | 8.6 m (28 ft) std configuration, up to 10.89 m (35.7 ft) on longest GP stick configuration |
| Swing speed | 4.6 r/min |
| Maximum travel speed (high range) | 3.3 km/h (2.1 mph); some listings show up to 2.2 mph - minor variance across sources |
| Maximum travel speed (low range) | approx. 1.4 mph (2.3 km/h) |
| Maximum drawbar pull | 846 kN (190,350 lb) |
| Gradeability | Not documented in sourced material - verify with dealer |
Forces
| Bucket digging force (SAE) - standard undercarriage, 7.6 m boom | 501 kN (112,600 lb), same for 3.4 m and 4.1 m stick |
| Bucket digging force (ISO) - standard undercarriage, 7.6 m boom | 586 kN (131,700 lb) with 3.4 m stick; 585 kN (131,500 lb) with 4.1 m stick |
| Stick digging force (SAE) - standard undercarriage | 439 kN (98,800 lb) with 3.4 m stick; 395 kN (88,800 lb) with 4.1 m stick |
| Stick digging force (ISO) - standard undercarriage | 458 kN (103,000 lb) with 3.4 m stick; 407 kN (91,500 lb) with 4.1 m stick |
| Bucket digging force (SAE) - long undercarriage, 9.2 m GP boom | 463 kN (104,175 lb) with 3.6 m or 4.5 m stick; 462 kN (103,950 lb) with 5.5 m stick |
| Bucket digging force (ISO) - long undercarriage, 9.2 m GP boom | 527 kN (118,575 lb) with 3.6 m or 4.5 m stick; 526 kN (118,350 lb) with 5.5 m stick |
| Stick digging force (SAE) - long undercarriage, 9.2 m GP boom | 424 kN (95,400 lb) with 3.6 m stick; 377 kN (84,825 lb) with 4.5 m stick; 328 kN (73,800 lb) with 5.5 m stick |
| Stick digging force (ISO) - long undercarriage, 9.2 m GP boom | 440 kN (99,000 lb) with 3.6 m stick; 391 kN (87,975 lb) with 4.5 m stick; 338 kN (76,050 lb) with 5.5 m stick |
Service capacities (summary)
| Fuel tank | 1700 L (450 gal) |
| Hydraulic system/tank | 1687 L (445 gal) |
| Engine oil | 83 L (22 gal) |
| Cooling system | 113 L (30 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
5110B fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 83 L (22 US gal) | Cat DEO (Diesel Engine Oil). Multigrade 15W-40 for general/warm ambient use, dropping to 10W-30 in cold-start climates per Cat's standard viscosity-by-temperature guidance for the 3412E HEUI engine fitted to this machine. Confirm exact grade against the OMM viscosity chart for the serial prefix in question. |
| Cooling system | 113 L (30 US gal) | Cat ELC (Extended Life Coolant) or Cat DEAC antifreeze/coolant, factory pre-mixed to protect to -50°C (-58°F). No separate summer/winter dilution note found; standard factory fill is rated for extreme cold as shipped. |
| Fuel tank | 1700 L (450 US gal) | Ultra-low sulfur diesel fuel meeting Cat's standard diesel fuel specification for the 3412E HEUI engine. No viscosity/climate split applicable. |
| Hydraulic system total (incl. tank) | 1687 L (445 US gal) | Cat TDTO (Transmission/Drive Train Oil) or Cat HYDO hydraulic oil, viscosity grade selected by ambient temperature (lighter multigrade for cold start, heavier for sustained high ambient), consistent with Cat's standard practice for large hydraulic excavators of this engine generation. Verify exact grade against the OMM fluid recommendation chart for this serial range. |
| Hydraulic tank (only) | 891 L (235 US gal) | Same fluid family as hydraulic system total above (Cat TDTO or Cat HYDO), non-pressurized oval tank. |
| Final drive (each) | 22 L (5.8 US gal) | Cat TDTO (Transmission/Drive Train Oil), viscosity graded by climate per standard Cat drivetrain-oil guidance (lighter grade for cold ambient, heavier for hot climates). Two final drives, each filled to this capacity. |
| Swing drive | 9 L (2.4 US gal) | Cat TDTO (Transmission/Drive Train Oil), same climate-based viscosity selection as final drives. |
| Grease (spec only) | Not capacity-rated; lubricated per grease-point schedule | Cat Multipurpose Grease (Cat MPGM), NLGI Grade 2 for general service, dropping to NLGI Grade 1 in sustained sub-freezing climates for easier gun feed. Machine ships with sealed-and-greased track and an optional autolube system that services all fittings automatically except the bucket linkage, which stays on a manual grease schedule. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 5110B maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
| Every 6,000 h |
|
Servicing the 5110B beyond the schedule
Predictive Maintenance & Fluid Analysis
Run S.O.S on 3412E engine oil every 250 hours; HEUI pumps show wear through fuel dilution and iron or copper trends before injectors fail. Sample swing drive and both final drive gear oils at 500 to 1000 hours - on a 127 tonne mass-excavation machine, wear metal shows up long before a planetary fails. Trend hydraulic oil through the closed-center load-sensing pump and swing motor, since contamination slows boom and stick cycle times gradually. Test coolant condition given the heat a 565 kW V-12 pushes through the system.
Corrective & Common Repairs
Common 5110B failures trace to the 3412E's HEUI fuel system - actuation pressure faults and IAP pump wear show up as rough idle or power loss before oil sampling flags them. Turbocharger and aftercooler core plugging from mining dust cuts boost and raises exhaust temperature; clean cores on a shortened interval in dusty pits. Swing bearing bolts loosen under mass-excavation shock loading and need regular re-torque checks. Track adjusters, idlers, and final drive seals wear faster in abrasive spoil; boom-to-stick pin bosses crack under overload - inspect at every walk-around.
Overhaul & Rebuild Points
Plan a 3412E inframe or top-end overhaul around oil consumption, blow-by, and S.O.S trend data rather than a fixed hour figure; this HEUI engine generation runs long between major work if analysis stays clean. Both final drives and the swing drive planetary are the next rebuild candidates, since this machine carries its own weight through two travel motors and one swing circuit under mining-duty load. Undercarriage wear - rollers, idlers, sprockets, track chain - drives the largest rebuild cost; measure against wear gauges before a full track group exchange.
Seasonal & Environment Servicing
In cold climates, confirm block heater and ether-assist starting aids on the 3412E before winter; factory coolant fill protects to -50°C (-58°F), but fuel and hydraulic oil still need cold-weather viscosity grades. In hot, dusty pits, shorten air filter and aftercooler cleaning below standard schedule, since this machine moves serious airflow through a 565 kW cooling package. Wet or clay sites pack the undercarriage fast - clear rollers and idlers daily, and watch the autolube system for blocked lines in cold weather; bucket linkage stays on manual grease.
5110B common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 129-0372 | Filter As-Water Sep & Fuel | Fuel system service | Check fitment → |
| 6I-2505 | Filter Element As-Air | Air intake service | Check fitment → |
| 6I-2506 | Filter Element As-Air | Air intake service | Check fitment → |
| 4I-1278 | Filter Element-Cab Air | Air intake service | Check fitment → |
| 108-0688 | Filter Element-Cab Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
5110B fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 36 164-3 | Injection actuation pressure (IAP) sensor circuit voltage above normal | IAP sensor signal circuit shorted high, damaged sensor, or wiring fault on the HEUI actuation-pressure feedback circuit | Check IAP sensor connector and wiring for chafing or short to power; test sensor output against spec; replace sensor if circuit tests good but reading is out of range |
| 36 164-4 | Injection actuation pressure (IAP) sensor circuit voltage below normal | Open or shorted-to-ground IAP sensor circuit, failed pressure-regulating valve, or weak HEUI hydraulic pump unable to build actuation pressure | Verify actuation oil supply and pump output first (no-start/hard-start symptom), then check sensor wiring continuity and connector condition before replacing the sensor or regulating valve |
| 36 100-1 | Engine oil pressure below normal operating range | Low engine oil level, plugged oil filter, worn oil pump, or failed oil pressure sensor/circuit | Shut down engine, check oil level and filter condition, verify sensor wiring, then confirm actual pressure with a mechanical gauge before condemning the pump |
| 36 110-0 | Engine coolant temperature above normal operating range | Low coolant level, blocked radiator/core, failed fan or fan drive, thermostat stuck closed, or sensor circuit fault | Check coolant level and radiator fins for blockage, confirm fan operation, inspect thermostat, then verify sensor reading against actual coolant temperature |
| 36 111-2 | Engine coolant level sensor signal erratic, intermittent, or incorrect | Low coolant in the sensor's sight area, corroded connector, or failing level sensor | Check actual coolant level and top off if low, inspect connector for corrosion, replace sensor if level is correct but signal stays erratic |
| 168-4 | Electrical system (battery) voltage below normal range | Weak or failing batteries, corroded terminals/grounds, or a charging system (alternator) fault | Load-test batteries, clean and tighten terminals and ground straps, then check alternator output under load |
| 247-9 | Cat Data Link communication abnormal update rate | Intermittent data link wiring fault, loose connector at the ECM or monitor, or a module not communicating on the link | Inspect data link harness and connectors for damage or corrosion, check for a second source of resistance/termination issue, and confirm all modules are communicating with Cat ET |
| 1-5 (through 16-5 by cylinder) | Cylinder injector solenoid circuit open (no current draw) | Broken or disconnected injector wiring, failed injector solenoid, or ECM driver fault on a HEUI unit injector | Check injector harness continuity and connector seating for the affected cylinder, then test solenoid resistance against spec before replacing the injector |
| 102-0 | Boost/intake manifold pressure above normal range | Turbocharger overboost, restricted charge air cooler causing sensor misread, or sensor circuit fault | Inspect air intake and charge air piping for restriction, verify turbocharger wastegate/actuator operation, then confirm sensor reading with a hand gauge |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
5110B attachments & work tools
Buckets
General-duty buckets run 4.2-8.6 m3 (5.5-11.2 yd3); heavy-duty rock buckets run 4.6-7.6 m3 (6.0-9.9 yd3); low-density coal/overburden buckets reach up to 10.4 m3 (13.6 yd3) for high-fill, low-density loading. All mount pin-on; there is no quick-coupler option at this weight class. Bucket width tracks capacity and application family, not a single fixed figure — confirm against the boom/stick combination fitted to the machine.
Hydraulic hammers
At 127-129 t (280,000-284,000 lb) operating weight, the 5110B sits in the extra-large mining/quarry breaker bracket built for roughly 85-140 t carriers, running large chisel diameters for hard-rock secondary breaking. No factory-specific hammer model is documented for the 5110B itself; breaker selection is done by carrier weight class and the machine's high-pressure auxiliary circuit, not a named factory kit.
Quick couplers
Not used at this weight class. The pin-grabber coupler lineup for this size of machine tops out around 90-95 t carriers; the 5110B at 127-129 t is beyond that range, so buckets and other tools mount pin-on with no coupler in the loop.
Thumbs/grapples
The 5110B's factory configuration list includes an optional high-pressure auxiliary valve arrangement that supports a thumb, alongside hammers, shears and crushers. A dedicated grapple is not documented for this model — loading duty on this class of machine is normally done with the bucket, not a grapple.
Rippers
Ripper-tooth attachments are offered for excavators up to 280,000 lb (127 t), matching the 5110B's standard operating weight, for prying and loosening rock at the face. It is not a common factory-fitted tool on this mining shovel — dedicated ripping work at this scale is normally still done with track-type dozers rather than the excavator.
Hydraulic-kit notes
Base implement hydraulics deliver up to about 466 L/min (123 gpm) at up to 350 bar (5,075 psi). An optional auxiliary valve/control arrangement adds a high-pressure circuit for hammers, shears, thumbs and crushers, plus a separate medium-pressure circuit for rotate-type functions. Flow and pressure need to be set per tool before fitting any attachment — verify with the dealer for the specific auxiliary package installed.
All 5110B assemblies by section
Every catalogued assembly group for the Caterpillar 5110B. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
6i-2586 Air Cleaner Gp -Lh
| 10***50 | Film; (Air Cleaner) (Radial Seal) (On Air Cleaner Cover) | 1 |
| 6I***05 | Filter Element As-Air; -Primary | 1 |
| 6I***06 | Filter Element As-Air; -Secondary | 1 |
6n-0184 Air Cleaner Gp
| 1P***90 | Gasket-Outlet; (Air Cleaner) | 2 |
| 2K***73 | Locknut Inside Guard Assembly | 20 |
| 6I***86 | Air Cleaner Group; -Rh | 1 |
6i-2588 Air Cleaner Gp -Rh
| 10***50 | Film; (Air Cleaner) (Radial Seal) (On Air Cleaner Cover) | 1 |
| 6I***05 | Filter Element As-Air; -Primary | 1 |
| 6I***06 | Filter Element As-Air; -Secondary | 1 |
169-0882 Aftercooler Gp-Air
| 14***58 | Core As-Condenser; (Air Conditioner, Refrigerant) | 1 |
| 16***82 | Aftercooler Group-Air | 1 |
| 17***05 | Core As-Aftercooler | 1 |
124-5015 Dust Ejector Gp
| 12***15 | Dust Ejector Group | 1 |
| 1S***68 | Tube-Bypass | 2 |
| 5P***97 | Clamp Fumes Disposal | 8 |
127-4907 Extension Gp-Exhaust
| 12***07 | Extension Group-Exhaust | 1 |
| 8S***37 | Adapter-Exhaust | 2 |
| 8S***44 | Clamp | 2 |
126-4442 Lines Gp-Air -Air To Air Aftercooling
| 12***42 | Lines Group-Air; -Air To Air Aftercooling | 1 |
| 12***66 | Spacer; (11x32x24-mm Thk) | 3 |
| 12***50 | Tube | 1 |
6i-4659 Lines Gp-Air -Exhaust
| 1B***55 | Nut,Plain,Hexagon Turbocharger Mounting | 6 |
| 1N***13 | Support-Elbow | 2 |
| 2N***65 | Bolt-High Temperature; (3/8-16x1.75-In) | 6 |
127-5103 Lines Gp-Air -Engine Inlet
| 11***52 | Pipe As; (Air Transfer-Rh) | 1 |
| 11***57 | Pipe As; (Air Transfer-Lh) | 1 |
| 12***03 | Lines Group-Air; -Engine Inlet | 1 |
129-5237 Lines Gp-Air -Air To Air Aftercooling
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 20 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
232-3671 Lines Gp-Air
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 3 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
179-7026 Manifold Gp-Exhaust
| 10***01 | Seal As-Exhaust | 8 |
| 10***12 | Spacer; (11.13x19.05x53-mm Thk) | 24 |
| 11***47 | Manifold-Exhaust; (Center, Lh) | 1 |
125-2014 Muffler Gp
| 10***05 | Plate As | 1 |
| 11***51 | Support As-Air Cleaner | 1 |
| 11***52 | Support As-Air Cleaner | 1 |
7n-5974 Precleaner Gp -Air Cleaner-Engine Air
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 4L***37 | Hex Head Capscrew, 3/8 Nc X 1 1/2 In. (38 mm) | 2 |
| 6V***01 | Nut; (3/8-16-Thd)(Plate To Rh And Lh Bracket As) | 2 |
127-0232 Shield Gp-Exhaust
| 12***32 | Shield Group-Exhaust | 1 |
| 19***14 | Shield As; (Lh) | 1 |
| 19***15 | Shield As; (Rh) | 1 |
169-1918 Sleeve-Exhaust Manifold
| 16***18 | Sleeve-Exhaust Manifold | 1 |
178-9572 Turbocharger Gp
| 13***75 | Clamp As; (Service Repair) | 1 |
| 14***04 | Housing (Turbine) | 1 |
| 16***70 | Cartridge Group-Turbocharger | 1 |
185-3657 Turbocharger Gp
| 17***72 | Turbocharger Group | 2 |
| 18***57 | Turbocharger Group | 1 |
| 1S***95 | Gasket-Turbocharger To Manifold; Gasket Turbocharger To Manifold | 2 |
Basic Engine
164-2211 Belt Tensioner Gp -Fan
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 4 |
108-1553 Camshaft Gp
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 10***74 | Gear-Camshaft Drive; (86-Teeth) | 1 |
| 10***53 | Camshaft Group | 1 |
130-5766 Cover Gp-Cylinder Block
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 16 |
| 13***66 | Cover Group-Cylinder Block | 1 |
| 23***37 | Seal-Integral | 1 |
4n-6876 Cover Gp-Flywheel Housing
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 3 |
| 4N***14 | Cover | 1 |
| 4N***76 | Cover Group-Flywheel Housing; Flywheel Housing Cover Group | 1 |
133-9741 Cover Gp-Front Housing
| 03***22 | Stud-Manifold (Note Ea) | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 3 |
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 6 |
109-2335 Cover Gp-Valve Mechanism
| 10***88 | Base-Valve Mechanism Cover | 6 |
| 10***35 | Cover Group-Valve Mechanism | 1 |
| 11***84 | Cover-Valve Mechanism | 3 |
213-3202 Crankshaft As
| 15***40 | Gear-Crankshaft; (99-Teeth) | 1 |
| 21***02 | Crankshaft As | 1 |
| 4N***84 | Dowel; (.75 Long) | 1 |
190-7653 Crankshaft Gp
| 14***67 | Seal Group-Crankshaft; (Front) | 1 |
| 14***68 | Seal-Crankshaft; (Rear)(Flywheel Housing) | 1 |
| 15***40 | Gear-Crankshaft; (99-Teeth) | 1 |
4n-0922 Crankshaft Gp
| 14***67 | Seal Group-Crankshaft; (Front) | 1 |
| 14***68 | Seal-Crankshaft; (Rear)(Flywheel Housing) | 1 |
| 15***40 | Gear-Crankshaft; (99-Teeth) | 1 |
117-9512 Cylinder Block As
| 11***20 | Seal-O-Ring; (Mid-Liner) | 12 |
| 11***12 | Cylinder Block As | 1 |
| 14***17 | Seal-O-Ring; (140.20mm Id) | 12 |
126-1372 Cylinder Block As
| 12***72 | Cylinder Block As | 1 |
| 2W***15 | Insert-Liner Seat; (1.605-mm Thk)(1.59mm Thk) | 0 |
| 3P***23 | Bolt-Bearing Cap; (7/8-14x7.75-In) | 14 |
126-1373 Cylinder Block Gp
| 11***27 | Seal-O-Ring; (19.18mm Id) | 8 |
| 12***72 | Cylinder Block As | 1 |
| 12***73 | Cylinder Block Group | 1 |
109-9010 Cylinder Block Gp
| 10***23 | Insert-Liner Seat; (5.21-mm Thk)(5.21mm Thk) | 0 |
| 10***24 | . Cover, Insert-Liner Seat; (5.16-mm Thk)(0.5-mm Us) | 0 |
| 10***25 | Insert-Liner Seat; (5.26-mm Thk)(0.5-mm Os), . Cover | 0 |
143-0046 Cylinder Head As
| 14***46 | Cylinder Head As | 1 |
| 1W***83 | Insert-Valve Seat; (Exhaust)(Standard) | 12 |
| 3B***23 | Core Plug--Flywheel Housing Pinion Shaft Hole | 12 |
143-0047 Cylinder Head As
| 14***46 | Cylinder Head As | 1 |
| 14***47 | Cylinder Head As | 1 |
| 17***88 | Guide-Valve; (Standard) | 24 |
192-1322 Cylinder Head As
| 10***94 | Dowel | 2 |
| 14***46 | Cylinder Head As | 1 |
| 17***88 | Guide-Valve; (Standard) | 24 |
108-1887 Cylinder Head Gp
| 10***87 | Cylinder Head Group | 1 |
| 12***21 | Valve-Exhaust | 12 |
| 12***22 | Valve-Inlet | 12 |
108-1552 Cylinder Head Gp
| 03***27 | Seal-O-Ring; (19.18mm Id) | 2 |
| 06***61 | Seal-O-Ring (Id=40.87mm) | 12 |
| 10***92 | Stud-Taperlock; (3/8-16x3.93in) | 24 |
6n-2229 Damper Gp -Crankshaft
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 12 |
| 16***30 | Damper As | 1 |
| 2D***74 | Bolt; (5/8-18x6.75-In) | 8 |
169-7375 Drive Gp-Fan -High Ambient
| 03***23 | Bolt-Self Locking; 4.45cm(1.75in)Lg Ea | 2 |
| 16***75 | Drive Group-Fan; -High Ambient | 1 |
| 17***30 | V-Belt Set; (Includes 4-Belts)(High Ambient Fan Drive) | 1 |
164-2210 Drive Gp-Fan
| 03***23 | Bolt-Self Locking; 4.45cm(1.75in)Lg Ea | 2 |
| 16***10 | Drive Group-Fan | 1 |
| 1A***68 | Bolt 7.50 In. (19.05 cm) Long | 1 |
128-9728 Flywheel Gp
| 12***27 | Flywheel As | 1 |
| 12***28 | Flywheel Group | 1 |
| 1B***38 | Bolt; (5/8-18x5.75-In) | 12 |
127-3516 Gear Gp-Front -Timing
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 1 |
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 1 |
| 10***13 | Plate-Retaining | 1 |
129-1338 Gear Gp-Rear
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
| 10***80 | Seal-O-Ring (Id=177.17mm) | 2 |
| 12***71 | Seal-O-Ring | 2 |
8d-5529 Hose As-Oil Drain Extension
| 8D***29 | Hose As | 1 |
4p-3010 Housing Gp-Flywheel
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 2 |
| 16***93 | Gasket-Cylinder | 1 |
137-8142 Housing Gp-Front
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 3 |
| 12***28 | Sensor Group-Speed; -Engine Speed/Timing | 2 |
| 13***42 | Housing Group-Front | 1 |
122-0939 Lifting Gp-Engine -Front
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 4 |
| 11***75 | Bracket-Lifting; (Right) | 1 |
| 11***15 | Bracket-Lifting; (Left) | 1 |
122-1177 Lifting Gp-Engine -Rear
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 2 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 10***40 | Sensor Group-Temperature; -Output Transfer Gear Oil | 1 |
129-5236 Pan Gp-Oil
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 6 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
192-8808 Piston & Rod Gp
| 13***61 | Ring-Piston; (Top)(Top) | 1 |
| 15***56 | Bolt-Special; (Oil Jet) | 1 |
| 16***78 | Rod As-Connecting | 1 |
173-0139 Piston & Rod Gp
| 13***61 | Ring-Piston; (Top)(Top) | 1 |
| 14***02 | Ring-Piston; (Intermediate) | 1 |
| 15***56 | Bolt-Special; (Oil Jet) | 1 |
129-5228 Plug Gp-Cylinder Block
| 12***28 | Plug Group-Cylinder Block | 1 |
| 6V***89 | Seal-O-Ring (Id=19.18mm) | 4 |
| 7W***34 | Plug-Pipe (3/8-18 Nptf Thd) | 4 |
122-9522 Plug Gp-Cylinder Head
| 12***22 | Plug Group-Cylinder Head | 1 |
| 4N***32 | Plug-Cup | 2 |
| 5P***63 | Plug-Cup | 2 |
6i-3815 Pulley Gp-Crankshaft -High Ambient
| 12***08 | Pulley-Crankshaft | 1 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 4 |
| 6I***14 | Pulley-Crankshaft; (257.8mm Od) | 1 |
126-2604 Pulley Gp-Crankshaft
| 12***04 | Pulley Group-Crankshaft | 1 |
| 12***08 | Pulley-Crankshaft | 1 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 4 |
107-1954 Rocker Arm Gp
| 10***54 | Rocker Arm Group | 1 |
| 10***03 | Screw; (3/8-24x1.67-In)(Intake) | 2 |
| 12***63 | Bracket-Shaft | 1 |
319-0785 Seal Gp-Crankshaft
| 14***68 | Seal-Crankshaft; (Rear)(Flywheel Housing) | 1 |
| 31***85 | Seal Group-Crankshaft; -Rear | 1 |
319-7401 Seal Gp-Crankshaft
| 14***67 | Seal Group-Crankshaft; (Front) | 1 |
| 31***01 | Seal Group-Crankshaft; -Front | 1 |
124-5018 Support Gp-Engine -Rear
| 12***19 | Bracket As | 2 |
| 12***18 | Support Group-Engine; -Rear | 1 |
| 6V***69 | Bolt; (M20x2.5x80-mm) | 12 |
173-3992 Support Gp-Engine -Front
| 17***91 | Support As | 1 |
| 17***92 | Support Group-Engine; -Front | 1 |
| 4N***83 | Dowel; (31.8mm X 15.88mm) | 2 |
108-1874 Valve Mechanism Gp
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 12 |
| 10***89 | Bridge-Valve | 24 |
| 10***88 | Valve Lifter Assem | 24 |
Cooling System
179-0687 Cooling Ar -High Ambient
| 16***75 | Drive Group-Fan; -High Ambient | 1 |
| 17***31 | Valve Group-Pressure Control; -High Ambient Temperature-Hydraulic Oil Cooling Fan | 1 |
| 17***87 | Cooling Ar; -High Ambient | 1 |
179-0686 Cooling Ar
| 12***04 | Pulley Group-Crankshaft | 1 |
| 16***10 | Drive Group-Fan | 1 |
| 17***31 | Valve Group-Pressure Control; -Hydraulic Oil Cooling Fan | 1 |
162-9655 Fan Gp-Suction
| 16***55 | Fan Group-Suction | 1 |
| 17***82 | Spider As-Fan; (Suction)(8 Blades) | 1 |
| 19***74 | Guard As-Fan | 1 |
122-4978 Lines Gp-Water -Turbocharger Supply
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 13 |
| 10***58 | Bracket | 1 |
169-7377 Lines Gp-Water -Turbo Return
| 03***70 | Tee | 1 |
| 16***77 | Lines Group-Water; -Turbo Return | 1 |
| 16***78 | Tube As-Water | 1 |
135-5076 Lines Gp-Water -Turbocharger Supply
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 5 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 7 |
168-7471 Lines Gp-Water -Engine
| 00***46 | Elbow; (45 Degree Pipe) | 1 |
| 00***70 | Nipple-Strainer To Flange | 1 |
| 12***26 | Hose | 1 |
4n-5837 Pump Gp-Water
| 10***49 | Adapter-Inlet | 1 |
| 11***79 | Seal-O-Ring | 1 |
| 11***80 | Seal-O-Ring | 1 |
137-1339 Pump Gp-Water
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 10***30 | Bearing As-Roller | 1 |
| 11***21 | Plug-Felt; (Water Pump Housing) | 1 |
177-3652 Radiator Ar
| 16***66 | Tank Group-Water; -Radiator | 1 |
| 16***48 | Wiring Group-Enclosure; -Radiator | 1 |
| 16***92 | Radiator Group | 1 |
168-7992 Radiator Gp
| 00***53 | Elbow-Pipe; (1/2-14 Nptf Thd) | 1 |
| 09***13 | Plug-Pipe | 1 |
| 10***72 | Hose; (Radiator) | 6 |
171-1249 Tank Gp-Coolant -Radiator
| 03***19 | Cap As-Radiator | 1 |
| 17***46 | Tank As-Coolant | 1 |
| 17***49 | Tank Group-Coolant; -Radiator | 1 |
162-9666 Tank Gp-Water -Radiator
| 10***50 | Tee | 1 |
| 16***66 | Tank Group-Water; -Radiator | 1 |
| 17***46 | Hose As | 1 |
Electrical And Starting System
3e-6328 Alarm Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 3E***65 | Wedge; (Receptacle Lock) (2 Pin) | 1 |
222-6444 Alternator Gp-Charging
| 12***36 | Alternator Group-Charging | 1 |
| 22***44 | Alternator Group-Charging | 1 |
9x-7803 Alternator Gp-Charging
| 03***12 | Screw-Forming; (10-24x0.5-In) | 4 |
| 10***31 | Fan-Alternator; (11-Blade) | 1 |
| 10***32 | Collar; (Alternator) | 1 |
127-4536 Alternator Gp-Charging
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 1 |
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 3 |
316-7251 Alternator Gp-Charging
| 10***31 | Fan-Alternator; (11-Blade) | 1 |
| 18***34 | Nut-Flange; (5/8-18-Thd) | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 2 |
191-2937 Application Gp-Machine -Caterpillar Monitoring System
| 17***91 | Control Group-Unprogrammed; -Traction Control-Transmission, Chassis-Automatic Retarder-Integrated Brake | 1 |
| 19***37 | Application Group-Machine; -Caterpillar Monitoring System | 1 |
223-5851 Application Gp-Monitor
| 16***67 | Control Group-Unprgmed Monitor; -Caterpillar Monitoring System | 1 |
| 22***51 | Application Group-Monitor | 1 |
164-4594 Battery & Wiring Gp
| 03***25 | Terminal-Ring; (For 3/8" Fastener) | 1 |
| 10***04 | Tube-Heat Shrink; (33-mm Dia)(4-cm) | 0 |
| 11***17 | Clip | 3 |
166-7240 Battery Gp -Wet Cell
| 16***02 | Cable As; (Pos.To Neg. Battery To Battery) | 1 |
| 16***40 | Battery Group; -Wet Cell | 1 |
| 1M***19 | Bolt; (5/16-18x1.375-In)(5/16-18x1.375 In) | 1 |
166-7241 Battery Gp -Dry Cell
| 16***02 | Cable As; (Pos.To Neg. Battery To Battery) | 1 |
| 16***41 | Battery Group; -Dry Cell | 1 |
| 1M***19 | Bolt; (5/16-18x1.375-In)(5/16-18x1.375 In) | 1 |
9w-0742 Block Gp-Junction -Battery
| 6V***22 | Tube-Heat Shrink; (25.4-mm Dia)(10-M) | 0 |
| 7F***60 | Washer | 6 |
| 8C***58 | Block Group-Junction; (Battery) | 1 |
162-6823 Control & Mtg Gp-Engine Elek
| 10***22 | Control Group-Engine Electronic | 1 |
| 11***69 | Spacer-Special; (8.2x25x89.7-mm Thk) | 4 |
| 16***23 | Control & Mtg Group-Engine Elek | 1 |
223-1548 Control & Mtg Gp-Engine Elek
| 11***69 | Spacer-Special; (8.2x25x89.7-mm Thk) | 4 |
| 15***71 | Control Group-Engine Electronic | 1 |
| 22***48 | Control & Mtg Group-Engine Elek | 1 |
151-7096 Control Gp-Eng Ratings Elek
| 15***96 | Control Group-Eng Ratings Elek | 1 |
172-0802 Control Gp-Engine Electronic
| 11***11 | Cover | 1 |
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 17***02 | Control Group-Engine Electronic | 1 |
105-6122 Control Gp-Engine Electronic
| 10***22 | Control Group-Engine Electronic | 1 |
| 17***02 | Control Group-Engine Electronic | 1 |
156-7172 Control Gp-Engine Electronic
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 15***72 | Control Group-Engine Electronic | 1 |
156-7171 Control Gp-Engine Electronic
| 15***71 | Control Group-Engine Electronic | 1 |
| 15***72 | Control Group-Engine Electronic | 1 |
172-9391 Control Gp-Unprogrammed -Machine Control
| 10***52 | Screw-Pan Head; (8-32x0.375-In) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 17***91 | Control Group-Unprogrammed; -Traction Control-Transmission, Chassis-Automatic Retarder-Integrated Brake | 1 |
160-1759 Control Gp-Unprogrammed -Machine Control
| 10***52 | Screw-Pan Head; (8-32x0.375-In) | 1 |
| 16***59 | Control Group-Unprogrammed; -Machine Control | 1 |
| 6V***03 | Kit; (Retaining Bolt) (Each Includes Bolt, Retaining Ring And 4 O-Ring Seals) | 2 |
170-7692 Electronics Gp-Machine
| 17***92 | Electronics Group-Machine | 1 |
| 30***77 | Software Group-Machine | 1 |
220-6346 Electronics Gp-Monitor -Ems
| 22***00 | Software Group-Monitor; -Ems | 1 |
| 22***01 | Service Group-Monitor; (Caterpillar Monitoring System) | 1 |
| 22***46 | Electronics Group-Monitor; -Ems | 1 |
216-5481 Harness As -Reel Lubrication
| 21***81 | Harness As; -Reel Lubrication | 1 |
162-7755 Lamp Gp-Dome
| 15***26 | Switch; (Dome Light) | 1 |
| 15***27 | Lamp; (24-Volt)(Dome Light) | 2 |
| 15***28 | Lens; (Dome Light) | 1 |
153-2073 Lamp Gp-Flood
| 15***73 | Lamp Group-Flood; -Cab-Extended Bolster-Rear-Blade-Moldboard | 1 |
| 15***50 | Body As-Lamp | 1 |
| 15***52 | Bezel | 1 |
147-0319 Lamp Gp-Flood
| 14***19 | Lamp Group-Flood; -Engine Work, Rh, Lh | 1 |
| 15***50 | Body As-Lamp | 1 |
| 15***52 | Bezel | 1 |
198-9135 Lighting Ar-Flood -Mass Excavator
| 16***67 | Wiring Group-Boom; -Floodlights | 1 |
| 17***34 | Lighting Group-Flood; -Mass Excavator | 1 |
| 19***35 | Lighting Ar-Flood; -Mass Excavator | 1 |
171-9786 Lighting Ar-Flood -Cab-Overhead Guard
| 12***90 | Guard Group-Overhead; -Cab | 1 |
| 17***86 | Lighting Ar-Flood; -Cab-Overhead Guard | 1 |
| 17***19 | Lighting Group-Flood; -Cab-Overhead Guard | 1 |
173-6119 Lighting Gp-Flood -Cab-Overhead Guard
| 11***17 | Bracket | 1 |
| 14***88 | Bracket As | 2 |
| 14***19 | Lamp Group-Flood; -Engine Work, Rh, Lh | 2 |
179-6034 Lighting Gp-Flood -Mass Excavator
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
173-6118 Lighting Gp-Flood -Cab-Standard
| 13***14 | Bracket; (Lh) | 1 |
| 13***15 | Bracket; (Rh) | 1 |
| 14***88 | Bracket As | 2 |
117-3915 Motor Gp-Electric -Engine Prelubrication
| 11***15 | Motor Group-Electric; -Engine Prelubrication-Sec Steering, Brake Release | 1 |
| 6V***01 | Nut; (3/8-16-Thd)(Plate To Rh And Lh Bracket As) | 2 |
| 7X***08 | Washer-Hard; (10.2x16x2-mm Thk) | 2 |
221-6888 Panel Gp-Circuit Breaker -Riser
| 21***21 | Cable As | 1 |
| 21***22 | Cable As | 1 |
| 21***23 | Cable As | 4 |
165-6634 Sensor Gp-Coolant Level -Coolant Loss
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***34 | Sensor Group-Coolant Level; (Water, Coolant)(Scac Expansion Tank) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
111-3794 Sensor Gp-Coolant Level -Coolant Loss
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***94 | Sensor Group-Coolant Level; -Coolant Loss-Aftercooler, Jacket Water | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
124-9325 Sensor Gp-Fuel Level
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***25 | Sensor Group-Fuel Level; -Ultrasonic | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
239-9957 Sensor Gp-Liquid Level
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 23***57 | Sensor Group-Liquid Level; -Coolant Loss | 1 |
102-1400 Sensor Gp-Pressure -Grease Barrel
| 10***00 | Sensor Group-Pressure; -Automatic Lubrication | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
167-1709 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***09 | Sensor Group-Pressure; -Injection Actuation Oil | 1 |
| 9X***13 | Sleeve (Order By cm)(Use As Required) | 0 |
161-9925 Sensor Gp-Pressure -Atmospheric Air
| 10***13 | Seal; (3 Pin Plug) | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***25 | Sensor Group-Pressure; -Turbocharger Inlet | 1 |
170-6105 Sensor Gp-Pressure -Travel Autoshift
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***05 | Sensor Group-Pressure; -Travel Autoshift | 1 |
| 3E***68 | Wedge-Plug Lock; (3-Pin) | 1 |
161-9932 Sensor Gp-Pressure -Powershift
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***32 | Sensor Group-Pressure; -Transmission Oil | 1 |
| 3E***71 | Wedge; (Receptacle Lock) (3 Pin) | 1 |
161-9931 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***31 | Sensor Group-Pressure; -Atmospheric | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 3 |
194-6724 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 19***26 | Harness As-Sensor; (16-18 Ga Wire)(Engine Oil Temperature) | 3 |
| 19***24 | Sensor Group-Pressure; -Air Inlet Manifold | 1 |
194-6725 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
| 19***25 | Sensor Group-Pressure; -Engine Oil | 1 |
194-6722 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
| 19***22 | Sensor Group-Pressure; -Atmospheric Air | 1 |
161-9926 Sensor Gp-Pressure -Turbocharger Inlet
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***26 | Sensor Group-Pressure; -Atmospheric Air, Turbo Inlet | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
265-9033 Sensor Gp-Speed
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 2 |
| 19***26 | Harness As-Sensor; (16-18 Ga Wire)(Engine Oil Temperature) | 3 |
| 19***27 | Harness As-Sensor; (14-Ga Wire)(Engine Oil Temperature) | 3 |
273-5041 Sensor Gp-Speed
| 11***66 | Seal-O-Ring | 1 |
| 13***07 | Washer; (21.1x28.1x0.9-mm Thk) | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
129-6628 Sensor Gp-Speed
| 10***13 | Seal; (3 Pin Plug) | 1 |
| 12***28 | Sensor Group-Speed; -Engine Speed/Timing | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
102-2240 Sensor Gp-Temperature
| 10***40 | Sensor Group-Temperature; -Output Transfer Gear Oil | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
100-3055 Sensor Gp-Temperature -Hydraulic Oil
| 10***55 | Sensor Group-Temperature; -Front Brake Oil-Torque Converter Oil-Transmission Oil-Aftercooler-Axle Oil-Rear Brake Oil | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 8T***32 | Receptacle-Connector; (3-Pin)(Throttle Position Sensor) | 1 |
106-0735 Sensor Gp-Temperature
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***35 | Sensor Group-Temperature; -Engine Oil | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
220-6000 Software Gp-Monitor -Ems
| 22***00 | Software Group-Monitor; -Ems | 1 |
169-5947 Starting Aid Gp-Ether
| 16***47 | Starting Aid Group-Ether; -Engine | 1 |
| 17***30 | Tube | 1 |
| 3B***64 | Bushing; (Reducing) | 1 |
179-0562 Starting Aid Gp-Ether -Radiator
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***62 | Tube | 1 |
| 17***62 | Starting Aid Group-Ether; -Radiator | 1 |
166-6839 Starting Ar-Cold Weather
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***29 | Starting Motor Group-Electric; -Cold Weather | 1 |
| 10***04 | Tube-Heat Shrink; (33-mm Dia)(4-cm) | 0 |
169-3948 Starting Ar-Cold Weather
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***29 | Starting Motor Group-Electric; -Cold Weather | 1 |
| 10***04 | Tube-Heat Shrink; (33-mm Dia)(4-cm) | 0 |
7n-1059 Starting Motor Gp-Electric
| 10***28 | Wire As | 1 |
| 4H***69 | Gasket Starter Mtg Part Of Kit P/N 5r***25 | 1 |
| 6V***85 | Starting Motor Group-Electric; -Cold Weather | 1 |
105-4729 Starting Motor Gp-Electric -Cold Weather
| 10***28 | Wire As | 1 |
| 10***29 | Starting Motor Group-Electric; -Cold Weather | 1 |
| 4N***59 | Gasket; (Starting Motor) | 1 |
6v-0885 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 13 |
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
237-1962 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 13 |
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
6v-0890 Starting Motor Gp-Electric -Cold Weather
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 13 |
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
142-3985 Switch Gp-Magnetic -Engine Prelubrication Relay
| 14***85 | Switch As-Magnetic; -Secondary Steering Relay-Engine Prelubrication Relay | 1 |
| 1B***78 | Nut,Plain,Hexagon Rod To Lever Uoc:Bsv,Bsx | 2 |
| 6V***78 | Nut; (10-32-Thd) | 2 |
142-3984 Switch Gp-Magnetic -Engine Prelubrication Relay
| 14***84 | Switch As-Magnetic; -Secondary Steering Relay-Engine Prelubrication Relay | 1 |
| 1B***78 | Nut,Plain,Hexagon Rod To Lever Uoc:Bsv,Bsx | 2 |
| 4D***26 | Washer,Lock Starter Ground Cable, Internal And External Teeth | 2 |
100-4417 Switch Gp-Flow
| 10***17 | Switch Group-Flow; -Engine Coolant | 1 |
| 17***08 | Switch Group-Flow; -Engine Coolant | 1 |
| 2B***95 | Cap Screw--Tube Assembly To Air Inlet Pipe | 2 |
172-8660 Switch Gp-Liquid Level -Swing Drive Oil
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***60 | Switch Group-Liquid Level; -Rear Engine Oil-Ster, Hydraulic Fan Oil-Engine On-Steering Oil, Engine Off-Auxiliary Coolant-Front Engine Oil-Brake Oil, Hoist-Engine Coolant-Tc Oil-Low, Cold | 1 |
| 9X***01 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 2 |
123-2993 Switch Gp-Liquid Level -Hydraulic Tank-Swing Drive Oil
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***93 | Switch Group-Liquid Level; -Engine Oil-Ster, Fan Dr Oil (Engine On)-Torque Converter Oil-Torque Conv Oil (Low, Cold)-Front, Rear Engine Oil-Steering Oil, Engine Off-Torque Conv Oil (Low, Hot)-Auxiliary Coolant-Brake Oil, Hoist-Engine Coolant | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
3e-0154 Switch Gp-Magnetic -Engine Prelubrication Relay
| 3E***54 | Switch Group-Magnetic; -Secondary Steering Relay-Engine Prelubrication Relay | 1 |
| 4D***26 | Washer,Lock Starter Ground Cable, Internal And External Teeth | 2 |
| 6V***78 | Nut; (10-32-Thd) | 2 |
254-3783 Switch Gp-Magnetic
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 25***83 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
167-0138 Switch Gp-Magnetic
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***38 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
241-8368 Switch Gp-Magnetic
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 24***68 | Switch Group-Magnetic; -Main Power Relay-Main Relay | 1 |
174-7165 Switch Gp-Position -Drop Down Ladder
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***53 | Film-Instruction; (Drop Down Ladder Pos Switch) | 1 |
| 17***65 | Switch Group-Position; -Drop Down Ladder | 1 |
197-7371 Switch Gp-Pressure -Travel
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 19***71 | Switch Group-Pressure; -Travel | 1 |
| 3E***65 | Wedge; (Receptacle Lock) (2 Pin) | 1 |
197-7370 Switch Gp-Pressure -Implement-Swing
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 19***70 | Switch Group-Pressure; -Swing Brake-Boom Raise-Swing | 1 |
| 3E***71 | Wedge; (Receptacle Lock) (3 Pin) | 1 |
170-1329 Switch Gp-Toggle -Grease Fill
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 17***29 | Switch Group-Toggle; -Grease Fill | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
165-5970 Switch Gp-Toggle
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***70 | Switch Group-Toggle; -Engine Shutoff-Starting Aid-Diagnostic Mode Select | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
165-7967 Wiring Gp-Boom -Floodlights
| 03***48 | Clip; (11.11mm .437in Id) | 9 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 5 |
| 11***52 | Spacer; (13x25x22.14-mm Thk) | 8 |
167-9510 Wiring Gp-Cab -Operator Console
| 03***95 | Clip | 3 |
| 10***42 | Wiper Pivot Group; (Front Window) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
215-9459 Wiring Gp-Cab -Standard
| 13***34 | Plug-Bezel | 2 |
| 16***41 | Control Group-Joystick; -Implement, Swing | 1 |
| 21***59 | Wiring Group-Cab; -Standard | 1 |
165-1618 Wiring Gp-Cab Riser -Standard Riser
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
215-8226 Wiring Gp-Cab Riser -Standard Mass Excavation
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 13***46 | Harness As; (Mcm Code Plug) | 1 |
| 21***19 | Wiring Group-Electronic Control; -Panel | 1 |
169-3949 Wiring Gp-Cab Riser -High Riser
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
165-7965 Wiring Gp-Chassis -Lh Frame
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
165-1620 Wiring Gp-Chassis -Rh Frame
| 10***55 | Sensor Group-Temperature; -Front Brake Oil-Torque Converter Oil-Transmission Oil-Aftercooler-Axle Oil-Rear Brake Oil | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
| 10***19 | Guard As | 1 |
167-9508 Wiring Gp-Console -Rh
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
167-7544 Wiring Gp-Console -Lh
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 2 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
215-8225 Wiring Gp-Control -Main Control Valve
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 2 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 13***00 | Clip; (Tab) | 1 |
164-9879 Wiring Gp-Control -Main Valve
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
215-8219 Wiring Gp-Electronic Control -Panel
| 10***72 | Film-Warning; (High Voltage)(Circuit Breaker Cover) | 1 |
| 11***34 | Switch Group-Magnetic; -Start Relay | 3 |
| 12***90 | Plate-Information; (Engine) | 1 |
165-0163 Wiring Gp-Electronic Control -Panel
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***72 | Film-Warning; (High Voltage)(Circuit Breaker Cover) | 1 |
164-6848 Wiring Gp-Enclosure -Radiator
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
167-9505 Wiring Gp-Enclosure -Engine
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
167-9625 Wiring Gp-Engine
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
| 10***04 | Suppressor As-Arc | 1 |
129-5239 Wiring Gp-Engine
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 0S***20 | Bolt--Customer Grounding Bolt | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
164-9881 Wiring Gp-Hydraulic Tank
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
185-4481 Wiring Gp-Lubrication -Automatic
| 10***00 | Sensor Group-Pressure; -Automatic Lubrication | 1 |
| 11***73 | Connector; (Receptacle) | 1 |
| 11***74 | Terminal; (Male) | 4 |
185-4480 Wiring Gp-Lubrication -Reel
| 10***00 | Sensor Group-Pressure; -Automatic Lubrication | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***18 | Clip | 1 |
185-4482 Wiring Gp-Lubrication -Auto & Reel
| 10***00 | Sensor Group-Pressure; -Automatic Lubrication | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***18 | Clip | 1 |
167-7625 Wiring Gp-Swing Frame
| 03***06 | Terminal-Ring; (00-Ga, 1/4-In Screw) | 1 |
| 10***70 | Adapter-O-Ring | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
109-0401 Wiring Gp-Unit Injector
| 03***34 | Seal-O-Ring | 1 |
| 10***61 | Clip | 1 |
| 10***01 | Wiring Group-Unit Injector | 1 |
169-3951 Wiring Gp-Walkway
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
| 13***68 | Film-Instruction; (Engine Shut-Down) | 1 |
| 13***09 | Grommet | 1 |
Engine Arrangement
170-9159 Engine Ar
| 10***17 | Switch Group-Flow; -Engine Coolant | 1 |
| 10***52 | Cylinder Head Group | 1 |
| 10***53 | Camshaft Group | 1 |
162-9647 Installation Ar-Engine
| 12***64 | Coupling Group-Flexible | 1 |
| 12***15 | Dust Ejector Group | 1 |
| 12***18 | Support Group-Engine; -Rear | 1 |
Frame And Body
168-7986 Counterweight Gp -Filled
| 13***25 | Film-Stripe; (Red)(161.5cm Each)(Counterweight) | 0 |
| 16***86 | Counterweight Group; -Filled | 1 |
| 17***22 | Plate | 1 |
170-4765 Enclosure Gp-Radiator
| 10***89 | Plate | 5 |
| 12***72 | Seal; (135-cm) | 0 |
| 12***40 | Door As | 1 |
124-5000 Fastener Gp-Counterweight
| 12***00 | Fastener Group-Counterweight | 1 |
| 3E***23 | Bolt; (M42x4.5x420mm) | 8 |
| 7X***40 | Washer; (45x78x8-mm Thk) | 8 |
208-8556 Fastener Gp-Handrail -Walkway-Standard Riser
| 20***56 | Fastener Group-Handrail; -Walkway-Standard Riser | 1 |
| 8T***40 | Bolt-Plt; (M16 X 2.0 X 60) | 8 |
| 8T***94 | Bolt (M12x1.75x50mm); (M12x1.75x50-mm) | 14 |
208-8559 Fastener Gp-Handrail -Walkway-High Riser
| 20***59 | Fastener Group-Handrail; -Walkway-High Riser | 1 |
| 20***15 | Plate | 2 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 8 |
205-7044 Fastener Gp-Walkway -Common Handhold
| 16***00 | Connector | 1 |
| 16***01 | Snap | 1 |
| 20***44 | Fastener Group-Walkway; -Common Handhold | 1 |
168-9192 Fastener Gp-Walkway -Standard Riser Handhold
| 13***22 | Bushing | 1 |
| 16***00 | Connector | 1 |
| 16***01 | Snap | 1 |
162-9604 Frame Gp-Upper -Swing
| 12***92 | Cover | 4 |
| 12***39 | Plate | 2 |
| 12***83 | Tread | 1 |
162-9571 Gear & Bearing Gp-Swing
| 11***83 | Seal (1100 cm) (Order By The Centimeter) | 0 |
| 12***00 | Bolt; (M30x3.5x260-mm) | 72 |
| 13***42 | Bolt-Hex Head; (Mj30x3.5x260mm) | 8 |
168-7988 Guard Gp-Bottom -Swing Frame
| 16***88 | Guard Group-Bottom; -Swing Frame | 1 |
| 17***79 | Plate As | 1 |
| 17***61 | Plate | 1 |
162-9720 Guard Gp-Final Drive -Rh
| 13***28 | Spacer; (30-mm Thk) | 5 |
| 16***20 | Guard Group-Final Drive; -Rh | 1 |
| 17***93 | Guard As | 1 |
162-9703 Guard Gp-Final Drive -Lh
| 13***28 | Spacer; (30-mm Thk) | 5 |
| 16***03 | Guard Group-Final Drive; -Lh | 1 |
| 17***93 | Guard As | 1 |
162-9614 Guard Gp-Radiator -Fan
| 16***14 | Guard Group-Radiator; -Fan | 1 |
| 16***77 | Barrier | 4 |
| 16***78 | Barrier | 1 |
176-0621 Guard Gp-Swivel
| 17***21 | Guard Group-Swivel | 1 |
| 17***11 | Plate As | 1 |
| 17***12 | Plate As | 1 |
205-3158 Handrail Gp -Basic
| 11***80 | Plate | 2 |
| 20***49 | Handrail As | 1 |
| 20***54 | Grate As | 1 |
168-6440 Handrail Gp
| 12***36 | Handhold As | 2 |
| 14***03 | Handrail As | 1 |
| 14***84 | Handrail As | 1 |
208-8554 Handrail Gp -Standard Riser
| 19***62 | Handrail As | 1 |
| 20***54 | Handrail Group; -Standard Riser | 1 |
166-2574 Handrail Gp
| 16***20 | Handrail As | 1 |
| 16***72 | Handrail As | 1 |
| 16***74 | Handrail Group | 1 |
208-8557 Handrail Gp -High Riser
| 20***57 | Handrail Group; -High Riser | 1 |
| 20***43 | Handrail As | 1 |
| 20***44 | Handrail As | 1 |
205-7043 Handrail Gp -Common
| 12***36 | Handhold As | 2 |
| 14***03 | Handrail As | 1 |
| 14***84 | Handrail As | 1 |
177-3653 Hood & Guard Ar
| 16***15 | Hood & Guard Group | 1 |
| 16***40 | Filter & Mtg Group-Oil; -Hydraulic High Pressure | 1 |
| 16***05 | Wiring Group-Enclosure; -Engine | 1 |
162-9615 Hood & Guard Gp
| 10***89 | Plate | 26 |
| 12***72 | Seal; (135-cm) | 0 |
| 13***21 | Hinge | 6 |
162-9563 Ladder Gp -Track & Step
| 16***63 | Ladder Group; -Track & Step | 1 |
| 16***09 | Ladder Group; -Track Step | 2 |
| 16***10 | Step As | 2 |
169-3175 Ladder Gp -Drop Down
| 11***50 | Sheave As | 2 |
| 11***28 | Shackle | 2 |
| 11***96 | Setscrew; (M10x1.5x55-mm) | 1 |
167-1988 Ladder Gp -Drop Down
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***16 | Plate As | 1 |
| 13***00 | Clip; (Tab) | 1 |
204-6228 Ladder Gp -Drop Down
| 03***76 | Bolt; (3/8-16x1.44-In) | 4 |
| 09***07 | Nut; (M12x1.75-Thd) | 2 |
| 12***98 | Ladder As; (Lh) | 1 |
207-4513 Ladder Gp -Drop Down
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***46 | Plate | 1 |
| 13***00 | Clip; (Tab) | 1 |
166-3409 Ladder Gp -Track Step
| 13***52 | Step As | 1 |
| 16***09 | Ladder Group; -Track Step | 1 |
| 19***04 | Ladder As | 1 |
173-2634 Lines Gp-Grease -Automatic
| 00***83 | Nipple-Pipe; (Hexagon) | 3 |
| 11***17 | Clip | 1 |
| 14***43 | Hose As | 1 |
173-2633 Lines Gp-Grease -Reel
| 17***33 | Lines Group-Grease; -Reel | 1 |
| 19***35 | Hose As | 1 |
| 19***66 | Hose As | 1 |
184-1185 Lines Gp-Grease -Stick
| 10***25 | Clip; (Slot) | 9 |
| 10***26 | Clip; (Tab) | 9 |
| 10***16 | Plate | 1 |
173-2636 Lines Gp-Grease -Automatic & Reel
| 00***83 | Nipple-Pipe; (Hexagon) | 3 |
| 11***17 | Clip | 1 |
| 14***14 | Hose As | 1 |
187-1611 Lines Gp-Grease -Stick
| 10***25 | Clip; (Slot) | 9 |
| 10***26 | Clip; (Tab) | 9 |
| 10***16 | Plate | 1 |
168-7983 Lubrication Ar-Automatic
| 16***83 | Lubrication Ar-Automatic | 1 |
| 17***34 | Lines Group-Grease; -Automatic | 1 |
| 17***44 | Tank Group-Grease; -Lubrication | 1 |
167-7436 Lubrication Gp-Central -Chassis
| 16***67 | Tube As | 1 |
| 16***68 | Tube As | 1 |
| 16***69 | Tube As | 1 |
162-9645 Lubrication Gp-Central -Stick
| 16***45 | Lubrication Group-Central; -Stick | 1 |
| 17***16 | Hose As | 1 |
| 17***18 | Hose As | 1 |
162-9658 Lubrication Gp-Central -Boom
| 16***58 | Lubrication Group-Central; -Boom | 1 |
| 17***53 | Manifold | 1 |
| 17***04 | Tube As | 1 |
169-5945 Lubrication Gp-Central -Stick
| 16***45 | Lubrication Group-Central; -Stick | 1 |
| 17***32 | Tube As | 1 |
| 17***33 | Tube As | 1 |
168-7993 Lubrication Gp-Electric -Reel
| 16***93 | Lubrication Group-Electric; -Reel | 1 |
| 17***33 | Lines Group-Grease; -Reel | 1 |
| 17***44 | Tank Group-Grease; -Lubrication | 1 |
172-7533 Lubrication Gp-Electric
| 17***33 | Lubrication Group-Electric | 1 |
| 17***36 | Lines Group-Grease; -Automatic & Reel | 1 |
| 17***44 | Tank Group-Grease; -Lubrication | 1 |
169-1352 Mounting Gp-Cab
| 11***58 | Plate | 2 |
| 11***51 | Plate-Cat; (Locate Behind | 1 |
| 13***45 | Cover As; (Panel) | 1 |
122-3823 Pump Gp-Lubrication -Grease
| 12***23 | Pump Group-Lubrication; -Grease | 1 |
| 21***49 | Kit-Cylinder Repair; (Lubrication Pump) | 1 |
| 21***54 | Valve Group-Control; (3-Way) | 1 |
217-3273 Pump Gp-Lubrication -Grease
| 18***89 | Solenoid | 1 |
| 19***28 | Motor As-Hydraulic | 1 |
| 19***95 | Valve | 1 |
208-7639 Pump Gp-Lubrication -Grease
| 00***63 | Elbow, 90 Deg Street, 3/4in. N.P.T. | 1 |
| 12***96 | Plate | 1 |
| 12***98 | Nut | 1 |
169-3741 Pump Gp-Lubrication -Grease
| 00***63 | Elbow, 90 Deg Street, 3/4in. N.P.T. | 1 |
| 12***23 | Pump Group-Lubrication; -Grease | 1 |
| 16***41 | Pump Group-Lubrication; -Grease | 1 |
222-5324 Reel Gp-Hose -Manual Lubrication
| 11***36 | Stop As | 1 |
| 11***37 | Grease Gun Group; (Manual Lubrication) | 1 |
| 11***38 | Swivel Joint As | 1 |
173-2640 Reel Gp-Hose -Manual Lubrication
| 11***36 | Stop As | 1 |
| 11***37 | Grease Gun Group; (Manual Lubrication) | 1 |
| 11***38 | Swivel Joint As | 1 |
174-1744 Tank Gp-Grease -Lubrication
| 17***44 | Tank Group-Grease; -Lubrication | 1 |
| 17***40 | Hose As | 1 |
| 17***41 | Hose As | 1 |
8w-2597 Valve Gp-Lube Distribution -4-Injector
| 19***54 | Packing | 4 |
| 5T***45 | Injector Group-Grease; (Lube Valve) | 4 |
| 8W***55 | Kit-Injector; (Lube Valve) | 1 |
5t-5009 Valve Gp-Lube Distribution -3-Injector
| 19***54 | Packing | 1 |
| 5T***09 | Valve Group-Lube Distribution; -3-Injector-Steering Cyl, Linkage, Rh, Lh-Hoist, Rear Susp Cyl, Rh, Lh-Front Susp, Steer Cyl, Rh, Lh | 1 |
| 5T***45 | Injector Group-Grease; (Lube Valve) | 3 |
5t-5010 Valve Gp-Lube Distribution -5 Injector
| 19***54 | Packing | 5 |
| 5T***10 | Valve Group-Lube Distribution; -5-Injector | 1 |
| 5T***45 | Injector Group-Grease; (Lube Valve) | 5 |
226-0319 Walkway Gp
| 22***47 | Clip | 13 |
| 22***39 | Grate As | 1 |
| 22***40 | Grate As | 1 |
166-7700 Walkway Gp -Standard Riser
| 16***90 | Grate As | 1 |
| 16***91 | Grate As | 2 |
| 16***92 | Grate As | 1 |
208-8555 Walkway Gp -Standard Riser
| 16***96 | Grate As | 1 |
| 16***97 | Grate As | 1 |
| 16***98 | Grate As | 1 |
205-7042 Walkway Gp -Common
| 16***90 | Grate As | 1 |
| 16***91 | Grate As | 2 |
| 16***92 | Grate As | 1 |
226-0758 Walkway Gp -Common
| 22***47 | Clip | 28 |
| 22***74 | Grate As | 1 |
| 22***75 | Grate As | 1 |
208-8558 Walkway Gp -High Riser
| 16***96 | Grate As | 1 |
| 16***97 | Grate As | 1 |
| 16***98 | Grate As | 1 |
Fuel System
162-0149 Drive Gp-Unit Inj Hyd Pump
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 2 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 2 |
| 10***27 | Gasket | 1 |
125-3431 Drive Gp-Unit Inj Hyd Pump
| 11***35 | Pin | 1 |
| 12***31 | Drive Group-Unit Inj Hydraulic Pump | 1 |
| 18***44 | Drive Group-Unit Inj Hydraulic Pump | 1 |
180-6644 Drive Gp-Unit Inj Hyd Pump
| 03***01 | Bolt; --To Reverse Shaft Bearing Retainer | 2 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 2 |
| 12***40 | Plate | 1 |
232-1176 Injector Gp-Fuel
| 11***98 | Adapter-Injection | 1 |
| 11***22 | Seal-Rectangular | 1 |
| 13***69 | Bolt-Socket Head | 2 |
198-7912 Injector Gp-Fuel
| 11***98 | Adapter-Injection | 1 |
| 11***22 | Seal-Rectangular | 1 |
| 13***69 | Bolt-Socket Head | 2 |
232-1183 Injector Gp-Fuel
| 11***98 | Adapter-Injection | 1 |
| 11***22 | Seal-Rectangular | 1 |
| 13***69 | Bolt-Socket Head | 2 |
232-1168 Injector Gp-Fuel
| 11***98 | Adapter-Injection | 1 |
| 11***22 | Seal-Rectangular | 1 |
| 13***69 | Bolt-Socket Head | 2 |
138-6256 Kit-Seal -Unit Injector Hydraulic Pump
| 03***53 | Seal-O-Ring; (08.92mm Id) | 3 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 2 |
| 03***39 | Seal-O-Ring (Id=9.25mm) | 1 |
179-6119 Lines Gp-Fuel -Engine Inlet
| 10***36 | Clip | 2 |
| 17***51 | Hose As | 1 |
| 17***19 | Lines Group-Fuel; -Engine Inlet | 1 |
168-7991 Lines Gp-Fuel -Tank
| 10***36 | Clip | 3 |
| 12***13 | Pump Group-Fuel Prm & Prim Filter | 1 |
| 16***91 | Lines Group-Fuel; -Tank | 1 |
168-7990 Lines Gp-Fuel -Fast Fill
| 11***17 | Clip | 2 |
| 12***63 | Adapter Group-Fast Fill Fuel; (Auto Shutoff) | 1 |
| 16***90 | Lines Group-Fuel; -Fast Fill | 1 |
114-5212 Lines Gp-Fuel Filter
| 03***33 | Seal-O-Ring; (12.42mm Id) | 4 |
| 09***87 | Tee | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 1 |
109-0399 Lines Gp-Injector Hyd Pump
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 3 |
| 10***02 | Tube As | 1 |
| 10***99 | Lines Group-Injector Hydraulic Pump | 1 |
126-7292 Pump & Mtg Gp-Unit Inj Hyd
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 4 |
108-7090 Pump Gp-Fuel Injection
| 10***26 | Clamp-Injector | 1 |
| 10***90 | Pump Group-Fuel Injection | 1 |
| 11***21 | Seal-Rectangular | 2 |
206-2630 Pump Gp-Fuel Injection
| 10***26 | Clamp-Injector | 1 |
| 11***21 | Seal-Rectangular | 2 |
| 11***08 | Elbow-Injector | 1 |
122-2513 Pump Gp-Fuel Prm & Prim Filter
| 10***08 | Pump As; (Fuel Priming) | 1 |
| 12***13 | Pump Group-Fuel Prm & Prim Filter | 1 |
| 12***57 | Base As-Filter; (Primary Fuel Filter) | 1 |
235-2024 Pump Gp-Unit Injector Hyd
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 4 |
| 11***20 | Coupling | 1 |
| 14***50 | Pump Group-Fuel Transfer | 1 |
235-2026 Pump Gp-Unit Injector Hyd
| 03***39 | Seal-O-Ring (Id=9.25mm) | 2 |
| 03***42 | Seal-O-Ring; (11.89mm Id) | 3 |
| 13***05 | Gasket-Housing | 1 |
225-0567 Pump Gp-Unit Injector Hyd
| 10***77 | Valve Group-Solenoid; -Pressure Control | 1 |
| 13***52 | Seal-O-Ring | 1 |
| 13***09 | Fitting | 2 |
225-0568 Pump Gp-Unit Injector Hyd
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 4 |
| 11***20 | Coupling | 1 |
| 14***50 | Pump Group-Fuel Transfer | 1 |
201-4201 Pump Gp-Unit Injector Hyd
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 4 |
| 11***20 | Coupling | 1 |
| 14***50 | Pump Group-Fuel Transfer | 1 |
144-0835 Pump Gp-Unit Injector Hyd
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 4 |
| 10***77 | Valve Group-Solenoid; -Pressure Control | 1 |
| 11***20 | Coupling | 1 |
201-4202 Pump Gp-Unit Injector Hyd
| 10***77 | Valve Group-Solenoid; -Pressure Control | 1 |
| 13***52 | Seal-O-Ring | 1 |
| 13***09 | Fitting | 2 |
220-8279 Tank & Mtg Ar-Fuel
| 16***87 | Lines Group-Swing Drive | 1 |
| 16***91 | Lines Group-Fuel; -Tank | 1 |
| 22***79 | Tank & Mtg Ar-Fuel | 1 |
179-0688 Tank & Mtg Ar-Fuel
| 16***63 | Wiring Group-Electronic Control; -Panel | 1 |
| 16***25 | Tank & Mtg Group-Fuel | 1 |
| 16***87 | Lines Group-Swing Drive | 1 |
168-4425 Tank & Mtg Gp-Fuel
| 12***48 | Valve-Drain; (Fuel Tank) | 1 |
| 12***90 | Hose As | 1 |
| 16***25 | Tank & Mtg Group-Fuel | 1 |
220-8282 Tank & Mtg Gp-Fuel
| 12***48 | Valve-Drain; (Fuel Tank) | 1 |
| 12***90 | Hose As | 1 |
| 22***82 | Tank & Mtg Group-Fuel | 1 |
220-8283 Tank Gp-Fuel
| 12***25 | Sensor Group-Fuel Level; -Ultrasonic | 1 |
| 18***95 | Vent As | 1 |
| 1H***28 | Seal (3.73 In. Inside Diameter) | 1 |
168-4426 Tank Gp-Fuel
| 10***09 | Cap As-Filler; (Fast Fill Fuel) | 1 |
| 12***25 | Sensor Group-Fuel Level; -Ultrasonic | 1 |
| 16***26 | Tank Group-Fuel | 1 |
282-1915 Valve Gp-Check
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 28***15 | Valve Group-Check; -Fuel | 1 |
| 6V***89 | Seal-O-Ring (Id=19.18mm) | 1 |
102-7535 Valve Gp-Check -Fuel Return Port
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 10***35 | Valve Group-Check; -Fuel Return Port | 1 |
| 6V***89 | Seal-O-Ring (Id=19.18mm) | 1 |
190-0016 Valve Gp-Fuel
| 03***53 | Seal-O-Ring; (08.92mm Id) | 3 |
| 10***77 | Valve Group-Solenoid; -Pressure Control | 1 |
| 19***16 | Valve Group-Fuel | 1 |
161-2309 Valve Gp-Fuel
| 03***43 | Seal-O-Ring | 1 |
| 10***06 | Seal-O-Ring (10.52mm Id) | 1 |
| 10***85 | Seal-O-Ring (6.07mm Id) | 2 |
165-1536 Valve Gp-Pressure Control
| 03***27 | Seal-O-Ring; (19.18mm Id) | 2 |
| 03***28 | Seal-O-Ring | 1 |
| 10***03 | Seal-O-Ring; (7.65mm Id) | 1 |
107-0677 Valve Gp-Solenoid
| 03***28 | Seal-O-Ring | 1 |
| 03***39 | Seal-O-Ring (Id=9.25mm) | 1 |
| 10***77 | Valve Group-Solenoid; -Pressure Control | 1 |
Hydraulic System
130-5999 Accumulator & Mtg Gp-Track -Rh
| 12***35 | Accumulator As; (Track Tension) | 1 |
| 12***66 | Plate | 1 |
| 13***99 | Accumulator & Mtg Group-Track; -Rh | 1 |
124-4984 Accumulator & Mtg Gp-Track -Lh
| 12***84 | Accumulator & Mtg Group-Track; -Lh | 1 |
| 12***35 | Accumulator As; (Track Tension) | 1 |
| 12***66 | Plate | 1 |
222-1901 Accumulator Gp -Charged-Track Tension
| 15***36 | Valve-Gas; (Brake) | 1 |
| 17***93 | Kit-Seal; (Hydraulic Accumulator) | 1 |
| 22***01 | Accumulator Group; -Charged-Track Tension | 1 |
222-1902 Accumulator Gp-Hydraulic -Uncharged
| 15***36 | Valve-Gas; (Brake) | 1 |
| 17***93 | Kit-Seal; (Hydraulic Accumulator) | 1 |
| 22***02 | Accumulator Group-Hydraulic; -Uncharged | 1 |
4i-5690 Accumulator Gp-Hydraulic -Pilot Lines
| 4I***39 | Core | 1 |
| 4I***90 | Accumulator Group-Hydraulic; -Pilot Lines | 1 |
| 4I***62 | Cap | 1 |
4i-5756 Accumulator Gp-Hydraulic -Pilot Lines
| 08***75 | Core | 1 |
| 08***76 | Cap | 1 |
| 08***77 | Seal | 1 |
7y-8421 Accumulator Gp-Hydraulic -Pilot Lines
| 4I***90 | Accumulator Group-Hydraulic; -Pilot Lines | 1 |
| 4I***56 | Accumulator Group-Hydraulic; -Pilot Lines | 1 |
| 7Y***21 | Accumulator Group-Hydraulic; -Pilot Lines | 1 |
158-9102 Actuator Gp-Piston Pump -Implement
| 15***02 | Actuator Group-Piston Pump; -Implement | 1 |
| 16***67 | Roller | 1 |
| 16***87 | Piston | 1 |
158-9103 Actuator Gp-Pump -Maximum Angle
| 15***03 | Actuator Group-Pump; -Maximum Angle | 1 |
| 16***95 | Piston | 1 |
| 16***96 | Rod; (159.2-mm, Oal) | 1 |
158-9104 Actuator Gp-Pump -Minimum Angle
| 15***04 | Actuator Group-Pump; -Minimum Angle | 1 |
| 16***01 | Piston | 1 |
| 16***02 | Rod; (152.2-mm, Oal) | 1 |
188-7048 Actuator Gp-Pump -Swing
| 16***67 | Roller | 1 |
| 18***04 | Piston | 1 |
| 18***05 | Bushing | 1 |
110-6198 Brake Gp-Swing -Parking
| 09***13 | Ring | 1 |
| 10***43 | Plug | 1 |
| 10***00 | Seal-O-Ring | 1 |
168-5261 Cooler & Mtg Gp-Hydraulic Oil
| 10***39 | Plate As | 4 |
| 15***47 | Motor Group-Piston; -Hydraulic Oil Cooling | 1 |
| 16***17 | Shroud | 1 |
177-3649 Cooler Ar-Hydraulic Oil
| 16***14 | Guard Group-Radiator; -Fan | 1 |
| 16***61 | Cooler & Mtg Group-Hydraulic Oil | 1 |
| 17***49 | Cooler Ar-Hydraulic Oil | 1 |
162-9542 Cylinder & Seal Gp-Boom -Mass Excavator
| 16***42 | Cylinder & Seal Group-Boom; -Material Handler | 1 |
| 16***47 | Cylinder Group-Boom; -Material Handler | 1 |
| 17***98 | Seal-Lip Type | 4 |
168-7995 Cylinder & Seal Gp-Bucket -Mass Excavator
| 16***95 | Cylinder & Seal Group-Bucket; -Mass Excavator | 1 |
| 17***98 | Seal-Lip Type | 4 |
| 22***40 | Cylinder Group-Bucket; -Mass Excavator | 1 |
162-9661 Cylinder & Seal Gp-Stick -Mass Excavator
| 16***61 | Cylinder & Seal Group-Stick; -Mass Excavator | 1 |
| 17***98 | Seal-Lip Type | 4 |
| 21***37 | Cylinder Group-Stick; -Mass Excavator | 1 |
173-2630 Cylinder Ar-Boom -Lh-Mass Excavator
| 16***42 | Cylinder & Seal Group-Boom; -Material Handler | 1 |
| 16***56 | Lines Group-Boom Cylinder; -Rh, Lh | 1 |
| 17***30 | Cylinder Ar-Boom; -Lh-Mass Excavator | 1 |
179-6146 Cylinder Ar-Boom -Rh-Mass Excavator
| 16***42 | Cylinder & Seal Group-Boom; -Material Handler | 1 |
| 17***40 | Lines Group-Boom Cylinder; -Rh | 1 |
| 17***46 | Cylinder Ar-Boom; -Rh-Mass Excavator | 1 |
173-2632 Cylinder Ar-Bucket -Mass Excavator
| 16***51 | Lines Group-Bucket Cylinder | 1 |
| 16***95 | Cylinder & Seal Group-Bucket; -Mass Excavator | 1 |
| 17***32 | Cylinder Ar-Bucket; -Mass Excavator | 1 |
177-3651 Cylinder Ar-Bucket -Mass Excavator
| 16***95 | Cylinder & Seal Group-Bucket; -Mass Excavator | 1 |
| 16***44 | Lines Group-Bucket Cylinder | 1 |
| 17***51 | Cylinder Ar-Bucket; -Mass Excavator | 1 |
173-2631 Cylinder Ar-Stick -Mass Excavator
| 16***61 | Cylinder & Seal Group-Stick; -Mass Excavator | 1 |
| 17***31 | Cylinder Ar-Stick; -Mass Excavator | 1 |
| 17***16 | Lines Group-Stick Cylinder; -Mass Excavator | 1 |
167-1847 Cylinder Gp-Boom -Mass Excavator
| 15***32 | Ring-Backup | 1 |
| 16***61 | Ring-Wear | 2 |
| 16***62 | Ring-Wear | 2 |
246-9100 Cylinder Gp-Bucket
| 11***65 | Ring-Wear | 2 |
| 15***33 | Ring-Backup | 1 |
| 16***58 | Ring-Wear | 2 |
168-1838 Cylinder Gp-Bucket -Mass Excavator
| 10***67 | Bolt; (M36x4x150-mm) | 4 |
| 11***65 | Ring-Wear | 2 |
| 15***33 | Ring-Backup | 1 |
228-7940 Cylinder Gp-Bucket -Mass Excavator
| 11***65 | Ring-Wear | 2 |
| 15***33 | Ring-Backup | 1 |
| 16***58 | Ring-Wear | 2 |
246-9045 Cylinder Gp-Stick
| 11***65 | Ring-Wear | 2 |
| 15***33 | Ring-Backup | 1 |
| 16***58 | Ring-Wear | 2 |
216-3337 Cylinder Gp-Stick -Mass Excavator
| 11***65 | Ring-Wear | 2 |
| 15***33 | Ring-Backup | 1 |
| 16***26 | Ring-Backup | 2 |
168-1843 Cylinder Gp-Stick -Mass Excavator
| 11***65 | Ring-Wear | 2 |
| 15***33 | Ring-Backup | 1 |
| 16***26 | Ring-Backup | 2 |
127-1474 Cylinder Gp-Track Tension
| 12***96 | Head | 1 |
| 12***64 | Seal; (U-Cup) | 1 |
| 12***74 | Cylinder Group-Track Tension | 1 |
185-1430 Drive Gp-Swing
| 13***75 | Drive Group-Swing | 1 |
| 18***30 | Drive Group-Swing | 1 |
| 2B***58 | Plug--To Block Upper Front Air Manifold | 1 |
134-3675 Drive Gp-Swing
| 09***50 | Ring-Retaining | 4 |
| 10***47 | Bearing-Roller | 1 |
| 10***20 | Seal | 2 |
162-9556 Fastener Gp-Swing Drive
| 12***38 | Bolt; (M24x3x500-mm) | 48 |
| 16***56 | Fastener Group-Swing Drive | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 2 |
215-8245 Fastener Gp-Swivel
| 21***21 | Plate | 1 |
| 21***45 | Fastener Group-Swivel | 1 |
| 4I***47 | Support As | 1 |
162-9559 Fastener Gp-Swivel
| 16***59 | Fastener Group-Swivel | 1 |
| 20***27 | Shim | 2 |
| 20***28 | Shim | 2 |
162-9640 Filter & Mtg Gp-Oil -Hydraulic High Pressure
| 16***40 | Filter & Mtg Group-Oil; -Hydraulic High Pressure | 1 |
| 16***72 | Screen Group-Hydraulic; -Single-Implement High Press-Swing, High Pressure | 2 |
| 17***95 | Screen Group-Hydraulic; -Tandem-Implement High Pressure | 1 |
130-3214 Filter Gp-Oil -Pilot Lines
| 13***14 | Filter Group-Oil; -Pilot Lines | 1 |
| 13***04 | Switch As-Pressure; (Power Train Oil Filter Bypass) | 1 |
| 13***64 | Filter Element As-Oil; (Standard Efficiency) | 1 |
7y-4075 Filter Gp-Oil -Pilot Lines
| 10***36 | Seal-O-Ring; (49.28mm Id) | 1 |
| 12***14 | Filter-Oil; (Ultra High Efficiency) | 1 |
| 4I***50 | Filter-Oil; (Advanced Efficiency)(Hydraulic)(Disposable) | 1 |
175-2425 Head Gp-Motor -Travel
| 10***14 | Seal-O-Ring | 1 |
| 13***22 | Plug-Break Off | 3 |
| 13***84 | Piston | 1 |
178-4032 Head Gp-Pump -Single Implement-Swing
| 08***72 | Plug-O-Ring | 2 |
| 12***94 | Plug; (Break Off) | 8 |
| 16***67 | Valve | 1 |
205-7376 Head Gp-Pump -Tandem, Implement
| 12***94 | Plug; (Break Off) | 10 |
| 16***69 | Coupling | 1 |
| 16***70 | Block | 1 |
188-3381 Head Gp-Pump -Tandem, Implement
| 12***94 | Plug; (Break Off) | 10 |
| 16***67 | Valve | 2 |
| 16***70 | Block | 1 |
222-2467 Hydraulic Ar -Tank Relief
| 20***76 | Cap-Filler; (Hydraulic Tank) | 2 |
| 22***67 | Hydraulic Ar; -Tank Relief | 1 |
| 2K***55 | Pin (Spring) | 1 |
162-9631 Hydraulic Ar
| 13***36 | Pump & Mtg Group-Pilot | 1 |
| 16***31 | Hydraulic Ar; -Standard | 1 |
| 16***32 | Lines Group-Hydraulic Oil Cooler | 1 |
215-8220 Hydraulic Ar -Standard Mass Excavation
| 13***36 | Pump & Mtg Group-Pilot | 1 |
| 16***56 | Lines Group-Boom Cylinder; -Rh, Lh | 1 |
| 16***74 | Lines Group-Pilot; -Console | 1 |
222-2466 Hydraulic Ar -Tank Relief
| 11***52 | Valve-Breaker Relief; (Hydraulic Tank Relief) | 1 |
| 22***66 | Hydraulic Ar; -Tank Relief | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
159-7744 Lever Gp-Control -Hydraulic Activation Control
| 09***30 | Screw-Machine; (M4x0.07x6-mm) | 2 |
| 11***69 | Lever | 1 |
| 11***70 | Support Assem. | 1 |
162-9660 Lines Gp-Boom -Bucket, Stick Cylinder
| 13***46 | Clamp | 8 |
| 16***60 | Lines Group-Boom; -Bucket, Stick Cylinder | 1 |
| 17***97 | Tube As | 2 |
162-9656 Lines Gp-Boom Cylinder -Rh, Lh
| 16***56 | Lines Group-Boom Cylinder; -Rh, Lh | 1 |
| 17***45 | Tube As | 1 |
| 17***46 | Tube As | 1 |
179-6040 Lines Gp-Boom Cylinder -Rh
| 17***46 | Tube As | 1 |
| 17***47 | Tube As | 1 |
| 17***49 | Support As | 1 |
162-9656 Lines Gp-Boom Cylinder -Lh
| 16***56 | Lines Group-Boom Cylinder; -Rh, Lh | 1 |
| 17***45 | Tube As | 1 |
| 17***48 | Tube As | 1 |
162-9651 Lines Gp-Bucket Cylinder
| 16***51 | Lines Group-Bucket Cylinder | 1 |
| 17***54 | Support As | 2 |
| 17***34 | Support As | 2 |
169-5944 Lines Gp-Bucket Cylinder
| 16***44 | Lines Group-Bucket Cylinder | 1 |
| 17***54 | Support As | 2 |
| 17***34 | Support As | 2 |
215-6446 Lines Gp-Front -Stick Cylinder
| 09***05 | Bolt-Socket Head; (M16x2x100-mm) | 4 |
| 13***49 | Plate | 1 |
| 13***07 | Clamp | 2 |
162-9536 Lines Gp-Front -Stick Cylinder & Work Tool Cylinder
| 10***73 | Plate | 4 |
| 12***66 | Clamp | 8 |
| 16***36 | Lines Group-Front; -Stick Cylinder & Work Tool Cylinder | 1 |
179-6116 Lines Gp-Front -Bucket Cylinder & Stick Cylinder
| 09***05 | Bolt-Socket Head; (M16x2x100-mm) | 8 |
| 13***49 | Plate | 4 |
| 13***07 | Clamp | 8 |
214-3448 Lines Gp-Front -Stick Cylinder
| 1P***09 | Seal-Rectangular | 2 |
| 21***48 | Lines Group-Front; -Stick Cylinder | 1 |
| 22***73 | Hose As | 1 |
162-9535 Lines Gp-Front -Boom Cylinder
| 13***49 | Plate | 1 |
| 13***46 | Clamp | 4 |
| 16***35 | Lines Group-Front; -Boom Cylinder | 1 |
214-0635 Lines Gp-Front -Boom Cylinder
| 1P***09 | Seal-Rectangular | 2 |
| 21***35 | Lines Group-Front; -Boom Cylinder | 1 |
| 22***70 | Hose As | 1 |
215-6511 Lines Gp-Front -Bucket Cylinder & Stick Cylinder
| 09***05 | Bolt-Socket Head; (M16x2x100-mm) | 4 |
| 13***49 | Plate | 3 |
| 13***07 | Clamp | 6 |
162-9641 Lines Gp-Hydraulic -Pump
| 10***72 | Clamp | 2 |
| 10***73 | Plate | 1 |
| 11***68 | Block | 1 |
162-9638 Lines Gp-Hydraulic Fan -Oil Cooler
| 12***99 | Valve Group-Makeup; -Hydraulic Oil Cooling Fan Motor | 1 |
| 14***98 | Block | 1 |
| 16***38 | Lines Group-Hydraulic Fan; -Oil Cooler | 1 |
179-6120 Lines Gp-Hydraulic Fan -Oil Cooler
| 13***21 | Block-Manifold | 1 |
| 17***12 | Hose As | 1 |
| 17***13 | Hose As | 1 |
162-9632 Lines Gp-Hydraulic Oil Cooler
| 16***32 | Lines Group-Hydraulic Oil Cooler | 1 |
| 16***26 | Valve Group-Control; -Hydraulic Oil Cooler Shutoff | 1 |
| 17***19 | Plate | 1 |
179-6115 Lines Gp-Hydraulic Oil Cooler
| 10***72 | Clamp | 4 |
| 10***73 | Plate | 2 |
| 17***16 | Hose As | 1 |
179-6138 Lines Gp-Pilot -Implement, Travel
| 11***98 | Hose As | 1 |
| 13***14 | Filter Group-Oil; -Pilot Lines | 1 |
| 13***53 | Valve Group-Shuttle; -Swing Piston Pump | 4 |
169-1345 Lines Gp-Pilot -Platform Travel
| 09***41 | Washer; (Hard) (19x34x3 mm Thk) | 8 |
| 10***58 | Valve Group-Selector; -Hydraulic Activation Control | 1 |
| 11***01 | Support | 1 |
169-3738 Lines Gp-Pilot -High Riser
| 16***38 | Lines Group-Pilot; -High Riser | 1 |
| 20***94 | Hose As | 8 |
| 22***59 | Hose As | 1 |
168-1974 Lines Gp-Pilot -Console
| 10***31 | Connector-Filter | 2 |
| 11***82 | Hose As (Nom 06, L=1400mm) | 4 |
| 11***84 | Hose As (Nom 06, L=1400mm) | 4 |
211-6559 Lines Gp-Pilot -Travel-Standard Riser
| 13***36 | Floor Mat | 1 |
| 16***80 | Hose As | 4 |
| 21***59 | Lines Group-Pilot; -Travel-Standard Riser | 1 |
205-2410 Lines Gp-Pilot -Third Pedal Travel-Standard Riser
| 11***83 | Valve Group-Shuttle; -Third Pedal, Straight Travel | 1 |
| 13***33 | Control Group-Hydraulic Pedal; -Straight Travel | 1 |
| 20***10 | Lines Group-Pilot; -Third Pedal Travel-Standard Riser | 1 |
211-6564 Lines Gp-Pilot -Travel-High Riser
| 13***36 | Floor Mat | 1 |
| 21***64 | Lines Group-Pilot; -Travel-High Riser | 1 |
| 22***60 | Hose As | 4 |
179-6139 Lines Gp-Pilot -Implement, Travel
| 16***52 | Sleeve-Abrasion; (14-In) | 0 |
| 17***70 | Clamp | 4 |
| 17***80 | Hose As | 1 |
169-3733 Lines Gp-Pilot -Standard Riser
| 16***79 | Hose As | 8 |
| 16***80 | Hose As | 4 |
| 16***33 | Lines Group-Pilot; -Standard Riser | 1 |
220-6150 Lines Gp-Pilot -Implement, Travel
| 17***60 | Tube As | 1 |
| 17***61 | Tube As | 1 |
| 22***50 | Lines Group-Pilot; -Implement, Travel | 1 |
211-4800 Lines Gp-Pilot -Third Pedal Travel-High Riser
| 11***83 | Valve Group-Shuttle; -Third Pedal, Straight Travel | 1 |
| 13***33 | Control Group-Hydraulic Pedal; -Straight Travel | 1 |
| 21***46 | Hose As | 1 |
213-8599 Lines Gp-Pilot -Load Sensing Signal Relief
| 17***12 | Tube As | 1 |
| 17***26 | Hose As | 1 |
| 21***99 | Lines Group-Pilot; -Load Sensing Signal Relief | 1 |
179-6133 Lines Gp-Return -Hydraulic Pump
| 13***13 | Block-Manifold; (Case Drain Front) | 1 |
| 13***26 | Block-Manifold; (Case Drain Rear) | 1 |
| 13***62 | Valve Group-Relief; -Cooler Bypass, Back Pressure | 1 |
179-6132 Lines Gp-Return -Main Control Valve
| 17***21 | Tube As | 1 |
| 17***32 | Lines Group-Return; -Main Control Valve | 1 |
| 1P***84 | Flange-Half | 2 |
174-0716 Lines Gp-Stick Cylinder -Mass Excavator
| 09***12 | Spacer; (17x32x9-mm Thk) | 2 |
| 17***54 | Support As | 1 |
| 17***55 | Support As | 1 |
168-7987 Lines Gp-Swing Drive
| 00***14 | Coupling-Pipe | 1 |
| 16***87 | Lines Group-Swing Drive | 1 |
| 17***69 | Hose As | 1 |
162-9564 Lines Gp-Swing Drive Drain
| 16***64 | Lines Group-Swing Drive Drain | 1 |
| 17***03 | Hose As | 1 |
| 17***04 | Hose As | 1 |
162-9633 Lines Gp-Swing Motor
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 16 |
| 16***33 | Lines Group-Swing Motor | 1 |
| 19***82 | Adapter | 2 |
162-9573 Lines Gp-Track Tension -Carbody
| 16***73 | Lines Group-Track Tension; -Carbody | 1 |
| 16***18 | Socket, Tee | 1 |
| 17***04 | Hose As | 2 |
162-9711 Lines Gp-Track Tension -Rh
| 08***88 | Elbow-90 Degree | 1 |
| 10***39 | Valve Group-Manifold & Relief; -Track Tension | 1 |
| 16***11 | Lines Group-Track Tension; -Rh | 1 |
162-9696 Lines Gp-Track Tension -Lh
| 10***39 | Valve Group-Manifold & Relief; -Track Tension | 1 |
| 16***96 | Lines Group-Track Tension; -Lh | 1 |
| 17***27 | Tube As | 1 |
162-9572 Lines Gp-Travel Motor -Carbody
| 13***74 | Block | 1 |
| 16***72 | Lines Group-Travel Motor; -Carbody | 1 |
| 16***18 | Socket, Tee | 1 |
162-9718 Lines Gp-Travel Motor -Rh
| 11***01 | Bolt-Socket Head; (M12x1.75x25-mm) | 8 |
| 12***53 | Boss | 1 |
| 16***18 | Lines Group-Travel Motor; -Rh | 1 |
162-9634 Lines Gp-Travel Motor -Chassis
| 16***34 | Lines Group-Travel Motor; -Chassis | 1 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 4 |
| 1P***05 | Seal (Check Valve Outlet) | 6 |
162-9700 Lines Gp-Travel Motor -Lh
| 11***01 | Bolt-Socket Head; (M12x1.75x25-mm) | 8 |
| 12***53 | Boss | 1 |
| 16***00 | Lines Group-Travel Motor; -Lh | 1 |
173-8793 Lines Gp-Travel Motor -Carbody
| 17***93 | Lines Group-Travel Motor; -Carbody | 1 |
| 19***20 | Tube As | 1 |
| 19***21 | Tube As | 1 |
162-9557 Motor & Mtg Gp-Swing
| 16***57 | Motor & Mtg Group-Swing | 1 |
| 17***89 | Motor Group-Swing | 2 |
| 8F***33 | Seal --Manifold Assembly To Housing Assembly; -- Manifold Assembly To Housing Assembly | 2 |
159-7147 Motor Gp-Piston -Hydraulic Oil Cooling
| 14***86 | Housing | 1 |
| 14***87 | Head | 1 |
| 15***47 | Motor Group-Piston; -Hydraulic Oil Cooling | 1 |
168-9047 Motor Gp-Piston -Dual Speed-Travel
| 13***10 | Valve Group-Relief; -Travel Piston Motor | 1 |
| 13***11 | Rotating Group-Motor; -Travel | 1 |
| 13***12 | Housing | 1 |
174-3489 Motor Gp-Swing
| 10***57 | Head | 1 |
| 11***03 | Bolt-Socket Head; (M16x2x40-mm) | 6 |
| 17***89 | Motor Group-Swing | 1 |
162-9692 Motor Gp-Travel
| 12***05 | Seal | 1 |
| 16***92 | Motor Group-Travel | 1 |
| 16***47 | Motor Group-Piston; -Dual Speed-Travel | 1 |
176-8277 Pump & Mtg Gp-Cooler Fan Drive -Hydraulic Oil Cooling Fan
| 17***38 | Pump Group-Piston; -Hydraulic Oil Cooling Fan | 1 |
| 17***77 | Pump & Mtg Group-Cooler Fan Drive; -Hydraulic Oil Cooling Fan | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
162-9643 Pump & Mtg Gp-Implement -Implement
| 10***80 | Seal-O-Ring (Id=177.17mm) | 1 |
| 15***79 | Pump Group-Piston; -Single Implement | 1 |
| 15***81 | Pump Group-Piston; -Tandem, Implement | 1 |
134-4336 Pump & Mtg Gp-Pilot
| 13***36 | Pump & Mtg Group-Pilot | 1 |
| 19***47 | Pump Group-Gear; -Pilot | 1 |
| 1P***78 | Flange; (To 5v***09 Tube Assembly) | 2 |
162-9644 Pump & Mtg Gp-Swing -Swing
| 10***80 | Seal-O-Ring (Id=177.17mm) | 1 |
| 15***80 | Pump Group-Piston; -Swing | 1 |
| 16***44 | Pump & Mtg Group-Swing; -Swing | 1 |
195-8747 Pump Gp-Gear -Pilot
| 13***55 | Gear-Idler; (91.4-mm) | 1 |
| 13***56 | Plate-Pressure | 2 |
| 13***57 | Kit-Seal; (Pilot Gear Pump) | 1 |
153-8179 Pump Gp-Piston -Single Implement
| 08***72 | Plug-O-Ring | 2 |
| 09***58 | Ring-Retaining | 2 |
| 11***16 | Pin | 4 |
153-8181 Pump Gp-Piston -Tandem, Implement
| 09***58 | Ring-Retaining | 2 |
| 11***16 | Pin | 8 |
| 14***69 | Pin-Threaded | 4 |
153-8180 Pump Gp-Piston -Swing
| 09***58 | Ring-Retaining | 2 |
| 11***16 | Pin | 4 |
| 14***49 | Coupling | 1 |
176-0338 Pump Gp-Piston -Hydraulic Oil Cooling Fan
| 08***19 | Pin | 1 |
| 10***35 | Cone-Bearing | 1 |
| 12***83 | Shim; (Preload) | 1 |
195-5237 Pump Gp-Piston -Hydraulic Oil Cooling Fan
| 08***19 | Pin | 1 |
| 10***35 | Cone-Bearing | 1 |
| 12***83 | Shim; (Preload) | 1 |
171-6853 Rotating Gp-Motor -Hydraulic Oil Cooling Fan
| 11***19 | Screw-Special; (M5x0.8x8-mm) | 7 |
| 14***90 | Plate | 1 |
| 14***94 | Barrel | 1 |
136-8411 Rotating Gp-Motor -Travel
| 11***16 | Shaft-Drive | 1 |
| 13***11 | Rotating Group-Motor; -Travel | 1 |
| 13***22 | Plate | 1 |
188-9944 Rotating Gp-Motor -Swing
| 11***65 | Plate | 1 |
| 11***18 | Screw; (M8x20-mm) | 7 |
| 12***13 | Seal; (Shaft) | 1 |
188-3390 Rotating Gp-Pump -Tandem, Implement
| 09***29 | Ring; (Retaining) | 1 |
| 14***73 | Roller | 4 |
| 16***89 | Bearing As | 1 |
188-3382 Rotating Gp-Pump -Tandem, Implement
| 09***29 | Ring; (Retaining) | 1 |
| 14***73 | Roller | 4 |
| 16***89 | Bearing As | 1 |
168-7868 Rotating Gp-Pump -Hydraulic Oil Cooling Fan
| 09***15 | Ring-Retaining | 1 |
| 13***73 | Plate-Valve | 1 |
| 13***75 | Bearing-Tapered Roller | 1 |
178-4002 Rotating Gp-Pump -Single Implement-Swing
| 09***29 | Ring; (Retaining) | 1 |
| 14***73 | Roller | 4 |
| 16***83 | Shaft | 1 |
172-2395 Screen Gp-Hydraulic -Tandem-Implement High Pressure
| 11***95 | Seal-O-Ring | 1 |
| 12***35 | Bolt-Socket Head; (M4x0.7x40-mm) | 4 |
| 13***66 | Screen; (Hydraulic High Pressure) | 1 |
169-4072 Screen Gp-Hydraulic -Single-Implement High Press-Swing, High Pressure
| 10***95 | Screen As-High Pressure | 1 |
| 12***35 | Bolt-Socket Head; (M4x0.7x40-mm) | 4 |
| 16***72 | Screen Group-Hydraulic; -Single-Implement High Press-Swing, High Pressure | 1 |
168-7985 Shield Gp-Implement Valve
| 16***85 | Shield Group-Implement Valve | 1 |
| 17***44 | Support As | 1 |
| 17***47 | Cover As | 1 |
211-5772 Swivel Gp
| 09***28 | Seal-O-Ring | 1 |
| 13***12 | Rotor | 1 |
| 16***92 | Housing | 1 |
166-2591 Swivel Gp
| 09***28 | Seal-O-Ring | 1 |
| 13***12 | Rotor | 1 |
| 16***91 | Swivel Group | 1 |
166-7634 Tank & Filter Gp-Hydraulic
| 08***07 | Pin | 4 |
| 10***20 | Gauge Group-Sight; (Hydraulic Fluid) | 1 |
| 11***52 | Valve-Breaker Relief; (Hydraulic Tank Relief) | 1 |
219-7875 Tank & Filter Gp-Hydraulic
| 08***07 | Pin | 4 |
| 09***28 | Setscrew-Socket; (M5x0.8x5-mm) | 3 |
| 10***20 | Gauge Group-Sight; (Hydraulic Fluid) | 1 |
237-5641 Tank & Filter Gp-Hydraulic
| 08***07 | Pin | 4 |
| 10***20 | Gauge Group-Sight; (Hydraulic Fluid) | 1 |
| 11***93 | Screen; (Hydraulic) | 1 |
179-0563 Tank & Mtg Ar-Hydraulic
| 16***35 | Tank Group-Hydraulic | 1 |
| 16***81 | Wiring Group-Hydraulic Tank | 1 |
| 17***63 | Tank & Mtg Ar-Hydraulic | 1 |
162-9635 Tank Gp-Hydraulic
| 16***35 | Tank Group-Hydraulic | 1 |
| 16***34 | Tank & Filter Group-Hydraulic | 1 |
| 19***09 | Panel As | 1 |
209-2109 Tank Gp-Hydraulic -Swing Drive
| 18***84 | Breather As; (Engine Oil) | 1 |
| 20***09 | Tank Group-Hydraulic; -Swing Drive | 1 |
| 2D***25 | Tee-To Shut-Off Control Group | 1 |
166-9141 Tank Gp-Hydraulic -Swing Motor
| 16***41 | Tank Group-Hydraulic; -Swing Motor | 1 |
| 18***84 | Breather As; (Engine Oil) | 1 |
| 3B***76 | Nipple-Pipe | 1 |
177-3650 Valve & Mtg Ar-Implement -Standard
| 16***37 | Valve & Mtg Group-Impl & Travel | 1 |
| 16***79 | Wiring Group-Control; -Main Valve | 1 |
| 16***85 | Shield Group-Implement Valve | 1 |
214-9100 Valve & Mtg Ar-Implement
| 16***85 | Shield Group-Implement Valve | 1 |
| 17***32 | Lines Group-Return; -Main Control Valve | 1 |
| 17***39 | Lines Group-Pilot; -Implement, Travel | 1 |
162-9558 Valve & Mtg Gp-Control -Swing
| 16***58 | Valve & Mtg Group-Control; -Swing | 1 |
| 17***88 | Valve Group-Control; -Swing | 1 |
| 7X***56 | Bolt-Plt; (M16 X 2.0 X 100) | 4 |
216-8234 Valve & Mtg Gp-Control -Implement & Travel
| 19***97 | Valve Group-Control; -Implement & Travel | 1 |
| 21***34 | Valve & Mtg Group-Control; -Implement & Travel | 1 |
| 22***69 | Support As | 1 |
162-9637 Valve & Mtg Gp-Impl & Travel
| 16***37 | Valve & Mtg Group-Impl & Travel | 1 |
| 16***86 | Support As | 1 |
| 19***97 | Valve Group-Control; -Implement & Travel | 1 |
200-7127 Valve Gp-Check -Tank Port Makeup
| 20***26 | Retainer | 2 |
| 20***27 | Valve Group-Check; -Tank Port Makeup | 1 |
| 2K***99 | Seal-Interface Between Inlet Manifold | 1 |
175-2440 Valve Gp-Check -Travel Motor
| 17***40 | Valve Group-Check; -Power Train Piston Motor | 1 |
| 17***68 | Seat | 1 |
| 17***69 | Poppet | 1 |
127-8394 Valve Gp-Check -Tank Port Makeup
| 12***94 | Valve Group-Check; -Tank Port Makeup | 1 |
| 12***95 | Retainer | 2 |
| 2K***99 | Seal-Interface Between Inlet Manifold | 1 |
6e-6042 Valve Gp-Check -Directional Flow-Accumulator-Pilot Low Pressure-Pilot High Pressure
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
| 6E***42 | Valve Group-Check; -Directional Flow-Accumulator-Pilot Low Pressure-Pilot High Pressure | 1 |
164-6916 Valve Gp-Control -Implement, Travel
| 10***07 | Spacer; (11.13x6.2x1.95-mm Thk) | 1 |
| 10***11 | Piston | 3 |
| 11***13 | Retainer (Bucket) | 2 |
179-1288 Valve Gp-Control -Swing
| 12***93 | Valve Group-Control; -Swing | 1 |
| 17***86 | Valve Group-Relief; -Swing Dual Pressure | 1 |
| 17***88 | Valve Group-Control; -Swing | 1 |
125-0193 Valve Gp-Control -Swing
| 11***40 | Retainer-Spring | 2 |
| 12***93 | Valve Group-Control; -Swing | 1 |
| 12***18 | Nut; (7/16-14-Thd)(7/16-14-2b Thd) | 2 |
164-6926 Valve Gp-Control -Hydraulic Oil Cooler Shutoff
| 12***19 | Cover | 1 |
| 12***20 | Valve | 1 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 1 |
211-1127 Valve Gp-Control -Pilot High Pressure
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 21***27 | Valve Group-Control; -Pilot High Pressure | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
164-6917 Valve Gp-Control -Boom, Stick
| 10***11 | Piston | 3 |
| 11***18 | Retainer | 3 |
| 11***30 | Retainer | 3 |
194-7897 Valve Gp-Control -Implement & Travel
| 10***62 | Bolt-Socket Head; (M16x2x180-mm)(M16x2x180mm) | 16 |
| 10***12 | Adapter | 2 |
| 11***65 | Filter; (Edge) | 1 |
136-8418 Valve Gp-Control -Travel Motor Speed Change
| 12***24 | Seal-O-Ring; (12.37mm Id) | 2 |
| 13***18 | Valve Group-Control; -Travel Motor Speed Change | 1 |
| 13***23 | Plug-Break Off | 2 |
164-6915 Valve Gp-Control -Implement & Travel
| 10***62 | Bolt-Socket Head; (M16x2x180-mm)(M16x2x180mm) | 16 |
| 10***12 | Adapter | 2 |
| 11***65 | Filter; (Edge) | 1 |
117-7497 Valve Gp-Control -Horsepower Control
| 11***97 | Valve Group-Control; -Horsepower Control | 1 |
| 11***25 | Setscrew | 1 |
| 4I***05 | Spool | 1 |
5i-8521 Valve Gp-Flow Compensator -Slow Return
| 5I***21 | Valve Group-Flow Compensator; -Slow Return Check | 1 |
| 5I***22 | Bushing | 1 |
| 5I***23 | Valve | 1 |
129-1899 Valve Gp-Makeup -Hyd Oil Cooling Fan Motor
| 12***99 | Valve Group-Makeup; -Hydraulic Oil Cooling Fan Motor | 1 |
| 1U***22 | Bearing-Sleeve; (12.65mm Id) | 1 |
| 1U***23 | Plug Assem. | 1 |
160-7439 Valve Gp-Makeup -Implement, Travel
| 10***85 | Plug | 1 |
| 13***55 | Spring | 1 |
| 16***39 | Valve Group-Makeup; -Stick, Boom, Bucket-Travel | 1 |
168-9981 Valve Gp-Manifold & Relief -Pilot Lines
| 12***17 | Valve Group-Relief; -Pilot Lines Low Pressure | 1 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 4 |
| 14***11 | Plug Group | 1 |
101-1939 Valve Gp-Manifold & Relief -Track Tension
| 10***39 | Valve Group-Manifold & Relief; -Track Tension | 1 |
| 10***02 | Body-Manifold | 1 |
| 14***79 | Valve Group-Relief; -Track Tension | 1 |
205-1670 Valve Gp-Manifold & Relief -Pilot Lines
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 7 |
| 14***11 | Plug Group | 1 |
| 15***45 | Valve Group-Solenoid; -Cooler Flow-Load Sensing Signal Relief-Swing Parking Brake-Travel Parking Brake-Two Speed Travel-Work Tool | 4 |
175-2442 Valve Gp-Motor Control -Travel Piston Motor
| 17***42 | Valve Group-Motor Control; -Pressure, Flow Compensator | 1 |
| 17***47 | Plug Group | 1 |
| 17***73 | Spool | 1 |
188-1307 Valve Gp-Motor Control -Travel Piston Motor
| 12***24 | Seal-O-Ring; (12.37mm Id) | 5 |
| 13***22 | Plug-Break Off | 1 |
| 13***23 | Plug-Break Off | 2 |
176-4984 Valve Gp-Pilot -Joystick-Implement, Swing
| 09***76 | Seal | 4 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 4 |
| 09***28 | Sleeve | 4 |
123-2148 Valve Gp-Pilot -Platform Travel
123-2604 Valve Gp-Pilot -Third Pedal, Straight Travel
| 08***48 | Bolt-Socket Head; (M8x1.25x30-mm)(M8x1.25x30mm) | 2 |
| 08***03 | Plug | 2 |
| 08***04 | Rod | 2 |
183-7621 Valve Gp-Pressure Control -High Ambient Temperature-Hydraulic Fan Cooling Fan
| 18***21 | Valve Group-Pressure Control; -High Ambient Temperature-Hydraulic Fan Cooling Fan | 1 |
| 19***08 | Valve Group-Solenoid; -High Ambient-Hydraulic Oil Cooling Fan | 1 |
| 3E***84 | Manifold | 1 |
191-8690 Valve Gp-Pressure Control -Hydraulic Oil Cooling Fan
| 19***90 | Valve Group-Pressure Control; -Hydraulic Oil Cooling Fan | 1 |
| 19***35 | Valve Group-Solenoid; -Hydraulic Oil Cooling Fan | 1 |
| 3E***84 | Manifold | 1 |
194-2531 Valve Gp-Pressure Control -High Ambient Temperature-Hydraulic Oil Cooling Fan
| 19***08 | Valve Group-Solenoid; -High Ambient-Hydraulic Oil Cooling Fan | 1 |
| 19***31 | Valve Group-Pressure Control; -High Ambient Temperature-Hydraulic Oil Cooling Fan | 1 |
| 3E***84 | Manifold | 1 |
171-6331 Valve Gp-Pressure Control -Hydraulic Oil Cooling Fan
| 14***36 | Screen As; (Blade Control Valve) | 1 |
| 14***28 | Washer-Spring | 1 |
| 14***50 | Coil As | 1 |
177-0031 Valve Gp-Pressure Control -High Ambient Temperature-Hydraulic Oil Cooling Fan
| 14***36 | Screen As; (Blade Control Valve) | 1 |
| 14***28 | Washer-Spring | 1 |
| 14***50 | Coil As | 1 |
168-2210 Valve Gp-Pump Control -Pressure, Flow Compensator-Hyd Oil Clg Fan Piston Pump
| 03***43 | Seal-O-Ring | 1 |
| 10***45 | Valve-Orifice; (Hydraulic Oil Check) | 1 |
| 16***10 | Valve Group-Pump Control; -Pressure, Flow Compensator-Hydraulic Oil Clg Fan Piston Pump | 1 |
158-9100 Valve Gp-Pump Control -Horsepower Control
| 15***00 | Valve Group-Pump Control; -Horsepower Control | 1 |
| 16***75 | Piston | 1 |
| 16***76 | Pin | 1 |
193-1416 Valve Gp-Pump Control -Hyd Oil Clg Fan Piston Pump
| 03***43 | Seal-O-Ring | 1 |
| 10***45 | Valve-Orifice; (Hydraulic Oil Check) | 1 |
| 19***36 | Spring | 1 |
183-5939 Valve Gp-Pump Control -Swing Piston Pump
| 08***01 | Plug As | 1 |
| 10***65 | Bolt-Socket Head; (M8x1.25x100-mm) | 5 |
| 11***96 | Valve Group-Pump Control; -Swing Piston Pump-High Pressure Cutoff | 1 |
183-5851 Valve Gp-Pump Control -Implement Piston Pump
| 12***94 | Plug; (Break Off) | 7 |
| 14***93 | Pin | 2 |
| 15***00 | Valve Group-Pump Control; -Horsepower Control | 1 |
4i-6283 Valve Gp-Pump Control -Flow Compensator-Load Sensing Control
| 10***26 | Piston | 1 |
| 10***93 | Retainer | 2 |
| 10***94 | Spring; (Margin) | 1 |
188-6536 Valve Gp-Pump Control -Positive Flow Control
| 10***11 | Retainer | 1 |
| 18***36 | Valve Group-Pump Control; -Swing Positive Flow Control | 1 |
| 18***37 | Piston | 1 |
117-7496 Valve Gp-Pump Control -Swing Piston Pump-High Pressure Cutoff
| 11***96 | Valve Group-Pump Control; -Swing Piston Pump-High Pressure Cutoff | 1 |
| 11***22 | Spring | 1 |
| 11***24 | Setscrew | 1 |
124-1400 Valve Gp-Reducing -Implement, Travel-Signal Duplication
| 12***00 | Valve Group-Reducing; -Implement, Travel-Signal Duplication | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
136-8410 Valve Gp-Relief -Travel Piston Motor
| 13***10 | Valve Group-Relief; -Travel Piston Motor | 1 |
| 13***20 | Valve Group; (Case Flushing) | 1 |
| 13***21 | Valve Group; (Flow Control) | 1 |
125-9320 Valve Gp-Relief -Travel Counterbalance
| 09***00 | Seal-O-Ring | 1 |
| 10***63 | Kit-Seal; (Travel Line Control Valve) | 1 |
| 12***50 | Seal-O-Ring | 1 |
7i-7329 Valve Gp-Relief -Margin-Hydraulic Pump Lines
| 09***85 | Seal- -O-Ring (17.80 mm Id) | 1 |
| 6F***72 | Seal (.674" Inside Diameter) | 1 |
| 6V***26 | Seal Interface Between Inlet Manifold; Seal (Interface Between Inlet Manifold | 1 |
9t-9083 Valve Gp-Relief -Main Control Valve
| 03***67 | Ring; (Back Up) | 1 |
| 03***79 | Seal-O-Ring (Id=10.82mm) | 1 |
| 03***36 | Seal-O-Ring | 2 |
123-7017 Valve Gp-Relief -Pilot Lines Low Pressure
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 12***17 | Valve Group-Relief; -Pilot Lines Low Pressure | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
179-1286 Valve Gp-Relief -Swing Dual Pressure
| 10***68 | Valve Group; (Pilot Head Piston Load) | 1 |
| 10***73 | Retainer | 1 |
| 11***26 | Valve Group-Hydraulic; (Swing Dual Pressure)(Pilot Operated) | 1 |
143-9479 Valve Gp-Relief -Track Tension
| 14***79 | Valve Group-Relief; -Track Tension | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
| 4T***42 | Spring | 1 |
169-0500 Valve Gp-Relief -Main Control Valve-Load Sensing Signal
| 10***40 | Adjuster | 1 |
| 10***41 | Adapter | 1 |
| 10***89 | Pin | 1 |
241-8900 Valve Gp-Relief
| 11***75 | Ring-Backup (24.92mm Id) | 1 |
| 24***00 | Valve Group-Relief | 1 |
| 2P***75 | Seal-O-Ring | 1 |
118-2431 Valve Gp-Relief -Main Control Valve-Load Sensing Signal
| 09***75 | Pin, Roller | 1 |
| 10***38 | Piston | 1 |
| 11***07 | Housing | 1 |
152-2119 Valve Gp-Relief -Margin-Main Control Valve
| 11***07 | Housing | 1 |
| 15***19 | Valve Group-Relief; -Mass Excavator Implement-Margin | 1 |
| 1P***09 | Seal-Rectangular | 2 |
180-5968 Valve Gp-Relief -Pilot Lines High Pressure
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 18***68 | Valve Group-Relief; -Pilot Lines High Pressure | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
138-9462 Valve Gp-Relief -Cooler Bypass, Back Pressure
| 12***96 | Cover | 1 |
| 13***62 | Valve Group-Relief; -Cooler Bypass, Back Pressure | 1 |
| 13***63 | Cover | 1 |
206-7485 Valve Gp-Relief -Pilot-Work Tool Line, Makeup
| 11***75 | Ring-Backup (24.92mm Id) | 1 |
| 20***85 | Valve Group-Relief; -Pilot-Work Tool Line, Makeup | 1 |
| 2P***75 | Seal-O-Ring | 1 |
169-0501 Valve Gp-Relief -Work Tool Line, Makeup-Boom, Stick Line, Makeup
| 11***75 | Ring-Backup (24.92mm Id) | 1 |
| 16***01 | Valve Group-Relief; -Work Tool Line, Makeup-Boom, Stick Line, Makeup | 1 |
| 2P***75 | Seal-O-Ring | 1 |
107-7058 Valve Gp-Selector -Hydraulic Lockout
| 10***58 | Valve Group-Selector; -Hydraulic Activation Control | 1 |
| 10***62 | Cover | 1 |
| 10***63 | Cover | 1 |
198-4707 Valve Gp-Shuttle
| 12***98 | Seat | 1 |
| 12***99 | Seat | 1 |
| 13***49 | Connector | 1 |
4t-1860 Valve Gp-Shuttle
| 14***03 | Seal-O-Ring | 1 |
| 14***04 | Ring-Backup | 2 |
| 14***05 | Ring-Backup | 2 |
6e-4429 Valve Gp-Shuttle -Ball Resolver
| 14***03 | Seal-O-Ring | 1 |
| 14***04 | Ring-Backup | 2 |
| 14***05 | Ring-Backup | 2 |
131-0753 Valve Gp-Shuttle -Swing Piston Pump
| 12***98 | Seat | 1 |
| 12***99 | Seat | 1 |
| 13***49 | Connector | 1 |
9t-9640 Valve Gp-Shuttle -Ball Resolver
| 1M***18 | Ball | 1 |
| 4J***77 | Seal - O - Ring (11.23mm Od) | 1 |
| 4T***25 | Seat | 1 |
112-0083 Valve Gp-Shuttle -Third Pedal, Straight Travel
| 11***83 | Valve Group-Shuttle; -Third Pedal, Straight Travel | 1 |
| 11***85 | Plug | 4 |
| 2D***42 | Ball 6.35 mm(.25 In.)Diameter | 4 |
195-3739 Valve Gp-Solenoid -Pump Control
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
| 17***92 | Kit-Seal; (Solenoid Valve) | 1 |
| 19***39 | Valve Group-Solenoid; -Pressure Reducing | 1 |
152-8385 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***43 | Locknut; (5/16-18-Thd) | 1 |
| 15***83 | Cartridge As | 1 |
147-1223 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***43 | Locknut; (5/16-18-Thd) | 1 |
| 14***23 | Valve Group-Solenoid; -Neutral Bypass | 1 |
131-5760 Valve Gp-Solenoid
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
121-1491 Valve Gp-Solenoid
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
152-8345 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***43 | Locknut; (5/16-18-Thd) | 2 |
| 15***43 | Cartridge As-Valve | 1 |
122-4973 Valve Gp-Solenoid
| 03***79 | Seal-O-Ring (Id=10.82mm) | 1 |
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
193-0235 Valve Gp-Solenoid
| 14***28 | Washer-Spring | 1 |
| 18***91 | Coil As | 1 |
| 19***35 | Valve Group-Solenoid; -Hydraulic Oil Cooling Fan | 1 |
131-5745 Valve Gp-Solenoid
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
192-0408 Valve Gp-Solenoid
| 14***28 | Washer-Spring | 1 |
| 18***91 | Coil As | 1 |
| 19***08 | Valve Group-Solenoid; -High Ambient-Hydraulic Oil Cooling Fan | 1 |
196-5862 Valve Gp-Solenoid & Manifold -Pump Torque Limiter Control
| 12***27 | Manifold | 1 |
| 19***39 | Valve Group-Solenoid; -Pressure Reducing | 1 |
| 19***62 | Valve Group-Solenoid & Manifold; -Pilot Lines-Proportional Reducing | 1 |
119-8994 Valve Gp-Solenoid & Manifold -Pilot Lines-Proportional Reducing
| 11***94 | Valve Group-Solenoid & Manifold; -Overspeed Control-Pump Pressure Override | 1 |
| 12***27 | Manifold | 1 |
| 12***73 | Valve Group-Solenoid | 1 |
136-8824 Valve Gp-Speed Control -Travel
| 00***76 | Ring | 2 |
| 13***24 | Valve Group-Speed Control; -Travel | 1 |
| 13***86 | Valve Group; (Speed Control) | 1 |
177-3587 Valve Gp-Travel Counterbalance
Implements
208-2950 Boom & Bearing As-Mass Ex
| 17***87 | Bearing; (200.52mm Id) | 2 |
| 17***33 | Bushing | 2 |
| 20***50 | Boom & Bearing As-Mass Ex | 1 |
162-9654 Boom & Bearing As-Mass Ex
| 16***54 | Boom & Bearing As-Mass Ex | 1 |
| 17***87 | Bearing; (200.52mm Id) | 2 |
| 17***09 | Boom As; (Mass Excavator) | 1 |
162-9652 Boom & Counterweight Ar -Mass Excavation
| 16***40 | Pin Group-Excavator; -Boom, Stick | 1 |
| 16***52 | Boom & Counterweight Ar; -Mass Excavation | 1 |
| 16***53 | Boom Ar-Mass Excavator | 1 |
162-9653 Boom Ar-Mass Excavator
| 16***42 | Cylinder & Seal Group-Boom; -Material Handler | 1 |
| 16***53 | Boom Ar-Mass Excavator | 1 |
| 16***54 | Boom & Bearing As-Mass Ex | 1 |
162-9626 Linkage Gp-Bucket -Mass Excavator
| 12***78 | Locknut; (M6x1-Thd) | 4 |
| 15***57 | Bolt; (1-1/4-7x13-In) | 2 |
| 16***26 | Linkage Group-Bucket; -Mass Excavator | 1 |
179-6607 Pin Gp-Excavator -Boom
| 17***88 | Pin | 1 |
| 17***89 | Plate | 2 |
| 17***90 | Spacer; (184x240x14-mm Thk) | 3 |
162-9540 Pin Gp-Excavator -Boom, Stick
| 16***40 | Pin Group-Excavator; -Boom, Stick | 1 |
| 17***90 | Spacer; (184x240x14-mm Thk) | 1 |
| 17***96 | Shim; (0.5-mm Thk) | 3 |
169-5946 Stick & Bearing As -Mass Excavator
| 16***46 | Stick & Bearing As; -Mass Excavator | 1 |
| 17***99 | Bearing; (200.52mm Id) | 2 |
| 17***08 | Bearing; (120.33mm Id) | 2 |
162-9646 Stick & Bearing As -Mass Excavator
| 16***46 | Stick & Bearing As; -Mass Excavator | 1 |
| 17***99 | Bearing; (200.52mm Id) | 2 |
| 17***08 | Bearing; (120.33mm Id) | 2 |
169-5943 Stick Ar-Mass Excavator
| 16***26 | Linkage Group-Bucket; -Mass Excavator | 1 |
| 16***95 | Cylinder & Seal Group-Bucket; -Mass Excavator | 1 |
| 16***43 | Stick Ar-Mass Excavator | 1 |
162-9630 Stick Ar-Mass Excavator
| 16***26 | Linkage Group-Bucket; -Mass Excavator | 1 |
| 16***30 | Stick Ar-Mass Excavator | 1 |
| 16***45 | Lubrication Group-Central; -Stick | 1 |
Lubrication System
4n-2481 Fastener Gp-Oil Pump Mounting -Engine
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 1 |
| 4N***81 | Fastener Group-Oil Pump Mounting; Oil Pump Mounting Fastener Group | 1 |
129-5233 Filler Gp-Engine Oil
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 2 |
| 12***33 | Filler Group-Engine Oil | 1 |
| 12***20 | Adapter | 1 |
4n-2357 Filter Gp-Engine Oil
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
| 1R***16 | Filter As-Engine Oil; (Standard Efficiency) | 2 |
| 2P***03 | Base As-Oil Filter; (Engine) | 2 |
138-2094 Fumes Disposal Gp
| 12***69 | Hose | 3 |
| 13***82 | Bracket | 1 |
| 13***94 | Fumes Disposal Group | 1 |
129-5232 Gauge Gp-Oil Level (Dipstick)
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 11***68 | Seal-O-Ring; (15.54mm Id) | 1 |
| 12***32 | Gauge Group-Oil Level (Dipstick) | 1 |
129-5234 Lines Gp-Engine Oil
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 1 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 2 |
122-1898 Lines Gp-Engine Oil Filter
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 6 |
129-5238 Lines Gp-Turbocharger Oil
| 06***57 | Seal-O-Ring | 1 |
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 5 |
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 1 |
177-4436 Oil Change Gp-High Speed -Engine
| 17***03 | Hose As | 1 |
| 17***36 | Oil Change Group-High Speed; -Engine | 1 |
| 2P***93 | Locknut-Bulkhead; (1 3/16-12 Thd) | 1 |
169-3947 Prelubrication Ar-Engine
| 12***15 | Pump & Motor Group; -Engine Prelubrication | 1 |
| 13***10 | Cable As; (Starter) | 1 |
| 14***35 | Connect Group; (Each Includes) | 1 |
123-8915 Pump & Motor Gp -Engine Prelubrication
| 11***15 | Motor Group-Electric; -Engine Prelubrication-Sec Steering, Brake Release | 1 |
| 12***14 | Pump; (Secondary Steering) | 1 |
| 12***15 | Pump & Motor Group; -Engine Prelubrication | 1 |
174-7916 Pump Gp-Engine Oil
| 14***03 | Shaft As-Idler | 1 |
| 17***16 | Pump Group-Engine Oil | 1 |
| 20***72 | Shaft As-Drive | 1 |
Machine Arrangement
162-9603 Chassis Ar -Upper Structure
| 16***03 | Chassis Ar; -Upper Structure | 1 |
| 16***04 | Frame Group-Upper; -Swing | 1 |
| 16***05 | Lines Group-Air Conditioner; -Chassis | 1 |
162-9552 Chassis Ar -Carbody
| 16***52 | Chassis Ar; -Carbody | 1 |
| 16***56 | Fastener Group-Swing Drive | 1 |
| 16***57 | Motor & Mtg Group-Swing | 1 |
162-9545 Common Ar -Excavator
| 16***37 | Installation Ar-Field | 1 |
| 16***45 | Common Ar; -Excavator | 1 |
| 16***52 | Chassis Ar; -Carbody | 1 |
162-9533 Common Ar
| 16***33 | Common Ar | 1 |
| 16***35 | Lines Group-Front; -Boom Cylinder | 1 |
| 16***36 | Lines Group-Front; -Stick Cylinder & Work Tool Cylinder | 1 |
162-9537 Installation Ar-Field
| 12***00 | Fastener Group-Counterweight | 1 |
| 12***07 | Extension Group-Exhaust | 1 |
| 16***37 | Installation Ar-Field | 1 |
Operator Station
169-1347 Air Conditioner Gp
| 11***89 | Rubber; (Cushion) | 1 |
| 12***72 | Hose-Defrost | 1 |
| 12***74 | Hose | 1 |
220-0171 Air Conditioner Gp
| 03***38 | Clamp | 2 |
| 09***92 | Washer, Tooth | 2 |
| 10***26 | Wheel As-Blower | 2 |
152-5085 Air Conditioner Gp
| 03***38 | Clamp | 1 |
| 09***92 | Washer, Tooth | 2 |
| 10***26 | Wheel As-Blower | 2 |
173-6639 Box Gp-Storage
| 10***13 | Bolt As-Special; (M12x1.75x15-mm) | 1 |
| 17***39 | Box Group-Storage | 1 |
| 17***09 | Cover | 1 |
162-9549 Cab Ar
| 13***78 | Screen Group-Sun; -Cab | 1 |
| 16***49 | Cab Ar | 1 |
| 16***52 | Mounting Group-Cab | 1 |
134-3871 Cab Gp
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 14 |
| 10***57 | Strip; (Locking) (275cm) | 0 |
| 10***56 | Seal; (275cm) | 0 |
173-7485 Cab Gp
| 13***94 | Door Group-Cab; (Cab) | 1 |
| 13***95 | Window Group-Front; (Front) | 1 |
| 13***71 | Cab Group | 1 |
154-0035 Compressor & Mtg Gp-Refrig
| 15***35 | Compressor & Mtg Group-Refrig | 1 |
| 15***36 | Guard As | 1 |
| 15***37 | Plate | 2 |
147-0392 Compressor Gp-Refrigerant
| 14***92 | Compressor Group-Refrigerant | 1 |
| 14***97 | Valve As-Relief; (Refrigerant Compressor) | 1 |
| 1P***56 | Plate | 1 |
203-5952 Compressor Gp-Refrigerant
| 01***11 | Screw; (10-16x0.25-In) | 3 |
| 14***97 | Valve As-Relief; (Refrigerant Compressor) | 1 |
| 1P***56 | Plate | 1 |
111-6279 Console Gp-Operator -Lh
| 11***79 | Console Group-Operator; -Lh | 1 |
| 11***13 | Support | 1 |
| 11***16 | Cover | 1 |
111-6280 Console Gp-Operator -Rh
| 11***80 | Console Group-Operator; -Rh | 1 |
| 11***12 | Support | 1 |
| 11***14 | Panel | 1 |
214-4082 Console Gp-Operator -Rh
| 11***12 | Support | 1 |
| 11***56 | Support Assem. | 1 |
| 11***66 | Cover | 1 |
150-1387 Control Gp-Air & Temperature
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
133-7900 Control Gp-Handle -Rh Joystick
| 08***70 | Sleeve | 2 |
| 09***17 | Screw-Machine; (M5x0.8x6-mm) | 2 |
| 12***08 | Knob; (Joystick) | 1 |
133-7899 Control Gp-Handle -Lh Joystick
| 08***70 | Sleeve | 2 |
| 09***17 | Screw-Machine; (M5x0.8x6-mm) | 2 |
| 12***09 | Shaft | 1 |
180-8007 Control Gp-Heat & Air Cond
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***12 | Screw-Pan Head; (8-16x0.32-In) | 4 |
217-2317 Control Gp-Heat & Air Cond
| 21***17 | Control Group-Heat & Air Cond | 1 |
| 21***20 | Clip | 2 |
134-2833 Control Gp-Hydraulic Pedal -Straight Travel
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 2 |
| 12***04 | Valve Group-Pilot; -Third Pedal, Straight Travel | 1 |
| 12***73 | Pin | 1 |
176-4986 Control Gp-Joystick -Lh-Stick & Swing
| 13***99 | Control Group-Handle; -Lh Joystick | 1 |
| 17***84 | Valve Group-Pilot; -Joystick-Implement, Swing | 1 |
| 17***86 | Control Group-Joystick; -Lh-Stick & Swing | 1 |
176-4985 Control Gp-Joystick -Rh-Boom & Work Tool
| 13***00 | Control Group-Handle; -Rh Joystick | 1 |
| 17***84 | Valve Group-Pilot; -Joystick-Implement, Swing | 1 |
| 17***85 | Control Group-Joystick; -Rh-Boom & Work Tool | 1 |
162-9541 Control Gp-Joystick -Implement, Swing
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 2 |
| 16***41 | Control Group-Joystick; -Implement, Swing | 1 |
| 17***85 | Control Group-Joystick; -Rh-Boom & Work Tool | 1 |
183-6282 Control Gp-Monitor -Electronic Monitoring System
| 18***82 | Control Group-Monitor; -Electronic Monitoring System | 1 |
219-3047 Control Gp-Travel -Travel
| 09***31 | Nut; (M12x1.75-Thd) | 2 |
| 09***32 | Knob; (Lh Travel Lever) | 1 |
| 09***33 | Knob; (Rh Travel Lever) | 1 |
160-6567 Control Gp-Unprgmed Monitor -Caterpillar Monitoring System
| 16***67 | Control Group-Unprgmed Monitor; -Caterpillar Monitoring System | 1 |
| 25***03 | Control Group-Unprogrammed; (Caterpillar Monitoring System)(Caterpillar Monitoring System) | 1 |
4i-6631 Cover Gp-Storage -Cab
| 09***23 | Screw; (M3x0.5x10-mm) | 2 |
| 10***89 | Nut Assem.; (M6x1) | 3 |
| 3E***20 | Screw; (M3x0.5x10-mm) | 2 |
130-5594 Door Gp-Cab
| 10***78 | Bolt; (Socket Head) (M10x1.5x35mm) | 6 |
| 10***61 | Guard | 1 |
| 11***20 | Straiker Bolt; (Striker) | 1 |
169-1353 Duct Gp-Cab Air -Cab
| 09***61 | Strap; (Cable) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***88 | Filter Element-Cab Air; (Air Conditioner/Cab Heater) | 1 |
169-3728 Fastener Gp-Cab Riser
| 14***09 | Plate | 4 |
| 16***28 | Fastener Group-Cab Riser | 1 |
| 4I***91 | Bolt; (M36x4x181-mm) | 2 |
169-1346 Fastener Gp-Seat -Cab Riser
| 12***17 | Guard | 2 |
| 12***18 | Guard | 2 |
| 12***22 | Support | 2 |
173-6638 Guard Ar-Vandalism
| 12***36 | Guard Group-Vandalism | 1 |
| 17***38 | Guard Ar-Vandalism | 1 |
| 17***39 | Box Group-Storage | 1 |
127-0290 Guard Gp-Overhead -Cab
| 09***85 | Locknut; (M16x2-Thd) | 2 |
| 11***24 | Spring As; (Gas) | 2 |
| 12***66 | Guard As; (Front) | 1 |
129-2136 Guard Gp-Vandalism
| 11***32 | Boss | 1 |
| 11***33 | Plate As | 1 |
| 12***36 | Guard Group-Vandalism | 1 |
162-9605 Lines Gp-Air Conditioner -Chassis
| 12***53 | Boss | 1 |
| 14***84 | Plate-Instruction; (Air Conditioner) | 1 |
| 15***61 | Accumulator-Air Conditioner | 1 |
169-3736 Lines Gp-Air Conditioner -High Riser
| 10***00 | Fitting As-Air Conditioner; (Quick Disconnect)(Refrigerant) | 2 |
| 10***97 | Valve As; (Low Side) | 1 |
| 10***99 | Valve As; (Air Conditioner Refrigerant) | 1 |
169-3731 Lines Gp-Air Conditioner -Standard Riser
| 10***00 | Fitting As-Air Conditioner; (Quick Disconnect)(Refrigerant) | 2 |
| 10***33 | Clip; (Slot) | 1 |
| 10***34 | Clip; (Tab) | 1 |
169-3732 Lines Gp-Heater -Standard Riser
| 12***53 | Boss | 1 |
| 13***53 | Hose; (192.5cm) (X2) | 0 |
| 16***32 | Lines Group-Heater; -Standard Riser | 1 |
162-9607 Lines Gp-Heater -Chassis
| 13***53 | Hose; (192.5cm) (X2) | 0 |
| 16***07 | Lines Group-Heater; -Chassis | 1 |
| 1L***79 | Elbow-Pipe; (3/8 In Pipe) | 1 |
169-3737 Lines Gp-Heater -High Riser
| 12***53 | Boss | 1 |
| 13***53 | Hose; (192.5cm) (X2) | 0 |
| 16***37 | Lines Group-Heater; -High Riser | 1 |
7y-0059 Literature Gp
| 09***45 | Cable; (Lanyard) | 1 |
| 5P***58 | Sleeve; (Cable Splice) | 2 |
| 5P***00 | Key Total 2 Pieces Per Unit; (Literature Compartment) | 2 |
232-6160 Mirror Gp-Rear View
| 17***29 | Plate | 1 |
| 19***78 | Washer-Hard; (13.5x30x12-mm Thk) | 8 |
| 1W***95 | Washer; (12.2x50x10-mm Thk) | 2 |
169-3729 Mirror Gp-Rear View
| 13***32 | Bracket As | 1 |
| 16***29 | Mirror Group-Rear View | 1 |
| 17***29 | Plate | 1 |
166-6943 Module Gp-Quad Gauge -Fuel Level-Engine Coolant Temperature-Hydraulic Oil Temp-Engine Oil Pressure
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 16***43 | Module Group-Quad Gauge; -Fuel Level-Engine Coolant Temperature-Hydraulic Oil Temp-Engine Oil Pressure | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
125-6235 Module Gp-Quad Gauge -Engine Coolant Temp-Engine Oil Pressure-Fuel Level-Hydraulic Oil Temp
| 12***35 | Module Group-Quad Gauge; -Engine Coolant Temp-Engine Oil Pressure-Fuel Level-Hydraulic Oil Temp | 1 |
| 3E***81 | Receptacle Assem. | 1 |
| 3E***83 | Wedge-Receptacle Lock; (6-Pin) | 1 |
174-9252 Motor Gp-Window Wiper -Lower
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 17***52 | Motor Group-Window Wiper; -Lower | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 5 |
147-7982 Motor Gp-Window Wiper
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 14***82 | Motor Group-Window Wiper; (Window Wiper) (Upper) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 5 |
213-2291 Operator Ar -Standard Riser W/Third Pedal
| 20***54 | Handrail Group; -Standard Riser | 1 |
| 20***55 | Walkway Group; -Standard Riser | 1 |
| 20***56 | Fastener Group-Handrail; -Walkway-Standard Riser | 1 |
208-9725 Operator Ar -Access & High Riser
| 17***33 | Operator Ar; -High Riser | 1 |
| 20***57 | Handrail Group; -High Riser | 1 |
| 20***58 | Walkway Group; -High Riser | 1 |
179-6033 Operator Ar -High Riser
| 16***49 | Cab Ar | 1 |
| 16***77 | Platform Ar; -Operator | 1 |
| 16***40 | Riser Ar-Cab; -High Riser | 1 |
208-9719 Operator Ar -Access & Standard Riser
| 17***32 | Operator Ar; -Standard Riser | 1 |
| 20***54 | Handrail Group; -Standard Riser | 1 |
| 20***56 | Fastener Group-Handrail; -Walkway-Standard Riser | 1 |
179-6032 Operator Ar -Standard Riser
| 16***49 | Cab Ar | 1 |
| 16***77 | Platform Ar; -Operator | 1 |
| 16***30 | Riser Ar-Cab; -Standard Riser | 1 |
213-2293 Operator Ar -Standard Riser W/Third Pedal
| 16***49 | Cab Ar | 1 |
| 16***77 | Platform Ar; -Operator | 1 |
| 21***60 | Riser Ar-Cab; -Third Pedal Travel-Standard Riser | 1 |
213-2292 Operator Ar -High Riser W/Third Pedal
| 20***57 | Handrail Group; -High Riser | 1 |
| 20***58 | Walkway Group; -High Riser | 1 |
| 20***59 | Fastener Group-Handrail; -Walkway-High Riser | 1 |
213-2294 Operator Ar -High Riser W/Third Pedal
| 16***49 | Cab Ar | 1 |
| 16***77 | Platform Ar; -Operator | 1 |
| 21***65 | Riser Ar-Cab; -Third Pedal Travel-High Riser | 1 |
168-1977 Platform Ar -Operator
| 11***79 | Console Group-Operator; -Lh | 1 |
| 11***80 | Console Group-Operator; -Rh | 1 |
| 11***81 | Support Group-Seat | 1 |
169-1350 Platform Gp -Operator
| 09***68 | Grommet | 1 |
| 12***59 | Grommet | 2 |
| 16***50 | Platform Group; -Operator | 1 |
169-3740 Riser Ar-Cab -High Riser
| 16***36 | Lines Group-Air Conditioner; -High Riser | 1 |
| 16***37 | Lines Group-Heater; -High Riser | 1 |
| 16***38 | Lines Group-Pilot; -High Riser | 1 |
211-6565 Riser Ar-Cab -Third Pedal Travel-High Riser
| 16***36 | Lines Group-Air Conditioner; -High Riser | 1 |
| 16***37 | Lines Group-Heater; -High Riser | 1 |
| 16***38 | Lines Group-Pilot; -High Riser | 1 |
169-3730 Riser Ar-Cab -Standard Riser
| 16***18 | Wiring Group-Cab Riser; -Standard Riser | 1 |
| 16***30 | Riser Ar-Cab; -Standard Riser | 1 |
| 16***31 | Lines Group-Air Conditioner; -Standard Riser | 1 |
211-6560 Riser Ar-Cab -Third Pedal Travel-Standard Riser
| 16***18 | Wiring Group-Cab Riser; -Standard Riser | 1 |
| 16***31 | Lines Group-Air Conditioner; -Standard Riser | 1 |
| 16***32 | Lines Group-Heater; -Standard Riser | 1 |
169-3734 Riser Gp-Cab -Standard Riser
| 15***15 | Pad-Rubber | 6 |
| 16***34 | Riser Group-Cab; -Standard Riser | 1 |
| 17***20 | Riser As | 1 |
169-3739 Riser Gp-Cab -High Riser
| 13***88 | Film (Warning/Instruction), Cab Riser Tilting; . Located On The Inside Of The Access Door Of The Riser On The Left Side Of The Riser. | 1 |
| 15***99 | Grommet | 1 |
| 15***15 | Pad-Rubber | 6 |
132-8078 Screen Gp-Sun -Cab
| 11***88 | Hook | 8 |
| 13***78 | Screen Group-Sun; -Cab | 1 |
| 13***22 | Roller Blind As | 1 |
122-9625 Seat Belt Gp
| 12***25 | Seat Belt Group; -Retractable, 3-In | 1 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
| 8S***24 | Bolt 57.15 mm(2.25 In.) Long | 1 |
111-6433 Seat Gp
| 11***33 | Seat Group | 1 |
| 11***50 | Screw-Flat Head; (M8x1.25x60-mm)(M8x1.25 Thd) | 4 |
| 13***24 | Kit-Handle Adjuster; (Seat) | 1 |
169-1349 Seat Gp-Suspension
| 09***27 | Lockwasher-Tooth; (0.6mm Thk) | 2 |
| 11***33 | Seat Group | 1 |
| 12***25 | Seat Belt Group; -Retractable, 3-In | 1 |
111-6281 Support Gp-Seat
| 11***81 | Support Group-Seat | 1 |
| 13***14 | Support As; (Seat) | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
124-3926 Suspension Gp-Seat
| 11***66 | Kit-Stop; (Seat) | 1 |
| 12***26 | Suspension Group-Seat | 1 |
| 12***04 | Plate | 2 |
8r-1774 Tank Gp-Window Washer
| 3W***98 | Cap; (Window Washer Tank Fill) | 1 |
| 3W***99 | Packing | 1 |
| 7T***90 | Pump As; (Washer) | 2 |
188-3546 Window Gp-Cab -Rear
| 18***46 | Window Group-Cab; -Rear | 1 |
146-6231 Window Gp-Door
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 2 |
| 09***57 | Screw-Machine; (M5x0.8x5.2-mm) | 3 |
| 14***31 | Window Group-Door; (Door) | 1 |
130-5595 Window Gp-Front
| 11***85 | Bumper | 2 |
| 11***05 | Ring | 2 |
| 11***33 | Bearing-Ball | 2 |
209-6971 Wiper & Washer Gp-Window -High Riser-Lower
| 10***62 | Film-Instruction; (Washer Fluid) | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
| 17***49 | Arm As-Wiper | 1 |
234-8783 Wiper & Washer Gp-Window
| 14***95 | Hose; (650-cm Each) | 0 |
| 17***49 | Arm As-Wiper | 1 |
| 17***52 | Motor Group-Window Wiper; -Lower | 1 |
169-3735 Wiper & Washer Gp-Window -Standard Riser-Lower
| 10***62 | Film-Instruction; (Washer Fluid) | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
| 16***35 | Wiper & Washer Group-Window; -Standard Riser-Lower | 1 |
101-0742 Wiper Pivot Gp -Upper
| 10***42 | Wiper Pivot Group; (Front Window) | 1 |
| 20***23 | Cap; (Wiper) | 1 |
| 3F***56 | Lockwasher; (8.43x15.5x0.76mm Thk) | 1 |
Power Train
124-4964 Coupling Gp-Flexible
| 12***27 | Cover | 1 |
| 12***64 | Coupling Group-Flexible | 1 |
| 12***39 | Flange As | 1 |
164-3231 Fastener Gp-Final Drive & Mtr
| 10***53 | Bolt; (M30x3.5x150-mm) | 23 |
| 16***31 | Fastener Group-Final Drive & Mtr | 1 |
| 9X***99 | Washer; (33x56x6-mm Thk) | 23 |
185-1418 Final Drive Gp
| 00***55 | Ring-Retaining | 1 |
| 09***70 | Bolt-Socket Hd; (M12 X 1.75 X 45) | 20 |
| 09***29 | Ring; (Retaining) | 3 |
124-4995 Sprocket Gp -Drive
| 12***16 | Sprocket | 1 |
| 12***95 | Sprocket Group; -Drive | 1 |
| 8T***29 | Bolt-Socket Head; (M16x2x55-mm) | 3 |
Service Equipment And Supplies
162-9544 Box Gp-Tool
| 16***44 | Box Group-Tool | 1 |
| 5P***00 | Key Total 2 Pieces Per Unit; (Literature Compartment) | 1 |
| 5P***02 | Padlock Group; (Includes: Battery Compartments, Platform Compartments, Radiator Access Door, Firewall Doors) | 1 |
229-0669 Cable Gp-Retaining -Cab Riser
| 18***92 | Cable As | 1 |
| 22***69 | Cable Group-Retaining; -Cab Riser | 1 |
| 2K***60 | Pin | 1 |
185-1814 Film Gp -Bucket
| 18***14 | Film Group; -Bucket | 1 |
| 7X***29 | Film; (Lift And Tie Down) (W/O Ripper: On Side Of Track Roller Frame Between Front Roller And Idler And Between Rear Roller And Idler (2 Each Side)) (W Ripper: On Side Of Track Roller Frame Between Front Roller And Idler And On Side Of Lower Ripper Frame By Rea | 6 |
| 7X***44 | Film; (Instruction) (Tie Down) (To Front Tie Down Eyes) | 4 |
177-8750 Film Gp -Machine
| 13***25 | Film-Stripe; (Red)(161.5cm Each)(Counterweight) | 0 |
| 17***24 | Film-Identification; (Cat)(Cat) | 2 |
| 17***50 | Film Group; -Machine | 1 |
170-4887 Film Gp -Stick
| 17***87 | Film Group; -Stick | 1 |
| 7X***29 | Film; (Lift And Tie Down) (W/O Ripper: On Side Of Track Roller Frame Between Front Roller And Idler And Between Rear Roller And Idler (2 Each Side)) (W Ripper: On Side Of Track Roller Frame Between Front Roller And Idler And On Side Of Lower Ripper Frame By Rea | 4 |
179-8718 Film Gp -Boom
| 17***02 | Film-Identification; (Cat) | 1 |
| 17***03 | Film-Identification; (Cat) | 1 |
| 17***18 | Film Group; -Boom | 1 |
166-5985 Kit-Compensator
| 16***85 | Kit-Compensator | 1 |
5p-8502 Padlock Gp
| 5P***00 | Key Total 2 Pieces Per Unit; (Literature Compartment) | 1 |
| 5P***02 | Padlock Group; (Includes: Battery Compartments, Platform Compartments, Radiator Access Door, Firewall Doors) | 1 |
| 8Y***64 | Sleeve (Not Part Of This Group) | 1 |
171-2193 Plate & Film Gp
| 13***96 | Film; (Instruction) (Secondary Exit) | 1 |
| 13***00 | Film-Identification; (Display Modes) | 1 |
| 17***93 | Plate & Film Group | 1 |
194-3067 Plate & Film Gp -Indonesian
| 13***96 | Film; (Instruction) (Secondary Exit) | 1 |
| 15***31 | Film-Warning; (Clearance) | 1 |
| 15***32 | Film-Warning; (Travel Control) | 1 |
162-9550 Plate & Film Gp -Machine
| 10***08 | Film-Information; (Engine Oil)(Install On Oil Filter Cap) | 1 |
| 10***20 | Film-Instruction; (Ladder Lights)(Ladder Lights) | 1 |
| 10***62 | Film-Instruction; (Washer Fluid) | 1 |
194-3064 Plate & Film Gp -Portuguese
| 10***80 | Film-Warning; (Hydraulic Tank Relief Valve) | 1 |
| 10***02 | Film-Instruction; (Hydraulic Tank) | 1 |
| 10***11 | Plate-Warning; (Track Tension Accumulator) | 2 |
194-3065 Plate & Film Gp -Indonesian
| 15***07 | Film-Instruction; (Hydraulic Tank) | 1 |
| 15***08 | Plate-Warning; (Track Tension Accumulator) | 2 |
| 15***10 | Film-Warning; (Hydraulic Tank Relief Valve) | 1 |
171-2196 Plate & Film Gp -Japanese
| 10***73 | Plate-Warning; (Machine Operation) | 1 |
| 11***30 | Film-Warning; (Engine Speed Control) | 1 |
| 11***31 | Film-Warning; (Clearance) | 1 |
171-2197 Plate & Film Gp -Spanish
| 13***96 | Film; (Instruction) (Secondary Exit) | 1 |
| 13***11 | Film-Identification; (Display Modes) | 1 |
| 17***97 | Plate & Film Group; -Spanish | 1 |
234-6839 Plate & Film Gp -Italian
| 10***82 | Film-Warning; (Hydraulic Tank Relief Valve) | 1 |
| 10***04 | Film-Instruction; (Hydraulic Tank) | 1 |
| 10***12 | Plate-Warning; (Track Tension Accumulator) | 2 |
171-2194 Plate & Film Gp -French
| 13***96 | Film; (Instruction) (Secondary Exit) | 1 |
| 13***10 | Film-Identification; (Display Modes) | 1 |
| 17***94 | Plate & Film Group; -French | 1 |
171-2191 Plate & Film Gp -Japanese
| 10***86 | Film-Warning; (Hydraulic Tank Relief Valve) | 1 |
| 10***08 | Film-Instruction; (Hydraulic Tank) | 1 |
| 10***19 | Plate-Warning; (Track Tension Accumulator) | 2 |
171-2190 Plate & Film Gp -German
| 10***81 | Film-Warning; (Hydraulic Tank Relief Valve) | 1 |
| 10***03 | Film-Instruction; (Hydraulic Tank) | 1 |
| 10***16 | Plate-Warning; (Track Tension Accumulator) | 2 |
234-6840 Plate & Film Gp -Italian
| 13***96 | Film; (Instruction) (Secondary Exit) | 1 |
| 19***25 | Film-Identification; (12-Volt) | 1 |
| 23***40 | Plate & Film Group; -Italian | 1 |
171-2189 Plate & Film Gp -French
| 10***78 | Film-Warning; (Hydraulic Tank Relief Valve) | 1 |
| 10***00 | Film-Instruction; (Hydraulic Tank) | 1 |
| 10***10 | Plate-Warning; (Track Tension Accumulator) | 2 |
220-1671 Plate & Film Gp -Norwegian
| 10***08 | Film-Warning; (Jump Start, Read Omm) | 2 |
| 22***71 | Plate & Film Group; -Norwegian | 1 |
| 22***74 | Film-Warning; (Hydraulic Tank Relief Valve) | 1 |
194-3066 Plate & Film Gp -Portuguese
| 13***96 | Film; (Instruction) (Secondary Exit) | 1 |
| 19***25 | Film-Identification; (12-Volt) | 1 |
| 19***66 | Plate & Film Group; -Portuguese | 1 |
171-2192 Plate & Film Gp -Spanish
| 10***79 | Film-Warning; (Hydraulic Tank Relief Valve) | 1 |
| 10***01 | Film-Instruction; (Hydraulic Tank) | 1 |
| 10***15 | Plate-Warning; (Track Tension Accumulator) | 2 |
171-2195 Plate & Film Gp -German
| 13***96 | Film; (Instruction) (Secondary Exit) | 1 |
| 13***12 | Film-Identification; (Display Modes) | 1 |
| 17***95 | Plate & Film Group; -German | 1 |
171-2188 Plate & Film Gp
| 10***63 | Film-Warning; (Hydraulic Tank Relief Valve) | 1 |
| 10***64 | Film-Instruction; (Hydraulic Tank) | 1 |
| 10***70 | Plate-Warning; (Pilot Accumulator) | 1 |
220-1672 Plate & Film Gp -Norwegian
| 10***02 | Film-Warning; (Travel Control) | 1 |
| 10***38 | Film-Notice; (Engine Start Switch)(Key Position) | 1 |
| 10***44 | Film-Warning; (Clearance) | 1 |
Undercarriage
162-9569 Carbody Ar
| 16***69 | Carbody Ar | 1 |
| 16***71 | Gear & Bearing Group-Swing | 1 |
| 16***72 | Lines Group-Travel Motor; -Carbody | 1 |
168-7994 Carbody Gp
| 09***08 | Seal-O-Ring (Id=44.70mm) | 1 |
| 09***95 | Plug | 1 |
| 16***94 | Carbody Group | 1 |
171-2198 Fastener Gp-Roller Frame
| 10***72 | Bolt; (M36x4x120-mm) | 4 |
| 10***11 | Spacer; (37x70x65-mm Thk) | 76 |
| 17***98 | Fastener Group-Roller Frame | 1 |
127-0278 Fastener Gp-Track Shoe
| 12***78 | Fastener Group-Track Shoe | 1 |
| 5P***68 | Bolt-Track; (1 1/8-12x4.21 Unjf Thd) | 220 |
| 5P***21 | Nut-Track; (1 1/8-12 Thd) | 220 |
162-9706 Frame Ar-Track Roller -Rh
| 12***90 | Idler Group-Front | 1 |
| 12***95 | Sprocket Group; -Drive | 1 |
| 12***84 | Link As-Track | 1 |
162-9687 Frame Ar-Track Roller -Lh
| 12***84 | Accumulator & Mtg Group-Track; -Lh | 1 |
| 12***90 | Idler Group-Front | 1 |
| 12***95 | Sprocket Group; -Drive | 1 |
162-9695 Frame Gp-Track Roller -Lh
| 16***95 | Frame Group-Track Roller; -Lh | 1 |
| 16***36 | Cover As-Lh | 1 |
| 19***18 | Frame As; (Lh) | 1 |
162-9709 Frame Gp-Track Roller -Rh
| 16***09 | Frame Group-Track Roller; -Rh | 1 |
| 16***44 | Cover As-Rh | 1 |
| 19***17 | Frame As; (Rh) | 1 |
124-4989 Guard Gp-Track Guide -End
| 12***56 | Guard As | 4 |
| 12***89 | Guard Group-Track Guide; -End | 1 |
| 12***18 | Plate | 4 |
168-7996 Guard Gp-Track Guide -Center
| 16***96 | Guard Group-Track Guide; -Center | 1 |
| 17***45 | Guard As | 2 |
| 7Y***32 | Bolt (M30) (70mm Long) | 8 |
168-7997 Guard Gp-Track Roller -Full Length
| 11***47 | Bolt; (M30x3.5x450-mm) | 16 |
| 12***73 | Guard As | 4 |
| 12***59 | Guard As | 4 |
164-3232 Idler Gp-Front
| 12***51 | Idler As | 1 |
| 12***71 | Bearing-Sleeve | 2 |
| 12***73 | Pin | 2 |
124-4990 Idler Gp-Front
| 10***59 | Bar | 1 |
| 12***53 | Plate As | 1 |
| 12***90 | Idler Group-Front | 1 |
125-9384 Link As-Track
| 12***80 | Link-Track; (Lh) | 1 |
| 12***81 | Link-Track; (Rh) | 1 |
| 12***82 | Pin-Track | 1 |
230-7162 Roller Gp-Track
| 12***78 | Bearing-Track Roller | 2 |
| 12***79 | Washer | 2 |
| 1S***08 | Seal-O-Ring | 2 |
159-8346 Roller Gp-Track Carrier -Top
| 12***68 | Shaft As-Roller | 1 |
| 12***69 | Roller & Bearing As | 1 |
| 12***70 | Cover As-Roller | 1 |
126-5415 Track Gp
| 12***15 | Track Group | 1 |
| 16***07 | Shoe-Track | 110 |
125-9387 Track Gp
| 12***87 | Track Group | 1 |
| 16***08 | Shoe-Track | 110 |
126-5411 Track Gp
| 12***11 | Track Group | 1 |
| 16***09 | Shoe-Track | 110 |
Work Tools
231-6300 Bucket Ar -7.0 Cubic Meters (9.1 Cubic Yards)
| 12***98 | Protector Group-Side Bar | 1 |
| 15***20 | Protector Group-Edge | 1 |
| 18***14 | Film Group; -Bucket | 1 |
172-4071 Bucket Ar-Mass Excavator -Rock
| 12***98 | Protector Group-Side Bar | 1 |
| 15***40 | Protector Group-Edge; -Narrow Bucket | 1 |
| 17***71 | Bucket Ar-Mass Excavator; -Rock | 1 |
198-4720 Bucket Ar-Mass Excavator
| 12***98 | Protector Group-Side Bar | 1 |
| 15***40 | Protector Group-Edge; -Narrow Bucket | 1 |
| 18***14 | Film Group; -Bucket | 1 |
142-3560 Bucket Ar-Mass Excavator -Rock
| 12***98 | Protector Group-Side Bar | 1 |
| 14***60 | Bucket Ar-Mass Excavator; -Rock, Spring Seat; Replaces 420690a1, Spring Seat | 1 |
| 15***20 | Protector Group-Edge | 1 |
198-4710 Bucket Ar-Mass Excavator
| 12***98 | Protector Group-Side Bar | 1 |
| 15***20 | Protector Group-Edge | 1 |
| 18***14 | Film Group; -Bucket | 1 |
200-6140 Bucket As-Mass Excavator
| 11***04 | Adapter-Tip; (J-600, 2-Strap, Center)(Center) | 5 |
| 18***14 | Film Group; -Bucket | 1 |
| 19***15 | Block | 2 |
200-6130 Bucket As-Mass Excavator
| 11***04 | Adapter-Tip; (J-600, 2-Strap, Center)(Center) | 5 |
| 18***14 | Film Group; -Bucket | 1 |
| 19***15 | Block | 2 |
157-4091 Bucket As-Mass Excavator -Rock
| 11***58 | Plate | 1 |
| 14***10 | Adapter | 2 |
| 14***14 | Adapter-Center | 3 |
198-4721 Bucket As-Mass Excavator
| 14***20 | Lug-Mounting | 3 |
| 15***99 | Block | 2 |
| 17***10 | Adapter-Tip | 2 |
198-4730 Bucket As-Mass Excavator
| 11***04 | Adapter-Tip; (J-600, 2-Strap, Center)(Center) | 6 |
| 18***14 | Film Group; -Bucket | 1 |
| 19***15 | Block | 3 |
179-2046 Bucket As-Mass Excavator -Rock
| 11***58 | Plate | 1 |
| 14***20 | Lug-Mounting | 3 |
| 17***10 | Adapter-Tip | 2 |
176-5720 Bucket As-Mass Excavator -Coal
| 17***20 | Bucket As-Mass Excavator; -Coal | 1 |
| 17***30 | Hinge As | 1 |
| 17***67 | Edge As | 1 |
200-6120 Bucket As-Mass Excavator
| 11***04 | Adapter-Tip; (J-600, 2-Strap, Center)(Center) | 6 |
| 18***14 | Film Group; -Bucket | 1 |
| 19***15 | Block | 3 |
231-6290 Bucket As-Mass Excavator
| 14***20 | Lug-Mounting | 4 |
| 15***04 | Edge As | 1 |
| 17***10 | Adapter-Tip | 2 |
198-4711 Bucket As-Mass Excavator
| 14***10 | Adapter | 2 |
| 14***14 | Adapter-Center | 3 |
| 14***20 | Lug-Mounting | 4 |
222-7598 Protector Gp
| 20***11 | Bolt-Plow; (1-1/4x7x5.52-Thd) | 12 |
| 22***93 | Edge-Segment; (Rh) | 2 |
| 22***94 | Edge-Segment; (Lh) | 2 |
222-7597 Protector Gp
| 19***92 | Bolt-Plow; (1-1/4-7x4.5-In) | 12 |
| 22***93 | Edge-Segment; (Rh) | 2 |
| 22***94 | Edge-Segment; (Lh) | 2 |
152-7840 Protector Gp-Edge -Narrow Bucket
| 13***88 | Pin-G.E.T. | 6 |
| 14***89 | Retainer As-G.E.T. | 6 |
| 15***25 | Protector-Edge; (Rh) | 1 |
152-7820 Protector Gp-Edge
| 13***88 | Pin-G.E.T. | 8 |
| 14***89 | Retainer As-G.E.T. | 8 |
| 15***15 | Protector-Edge; (Rh) | 2 |
128-5698 Protector Gp-Side Bar
| 11***09 | Retainer As-G.E.T. | 2 |
| 12***98 | Protector Group-Side Bar | 1 |
| 12***99 | Protector | 2 |
220-8812 Retainer As
| 22***12 | Retainer As | 1 |
3g-3352 Tip Gp-Penetration
| 10***78 | Pin-G.E.T.; (Extreme Service) | 1 |
| 10***59 | Retainer As.-Ground Engaging Tool | 1 |
| 3G***52 | Tip Group; -J-550, Heavy-Duty | 1 |
152-7823 Tip Gp-General Purpose
| 14***16 | Retainer As | 1 |
| 15***18 | Pin | 1 |
| 15***23 | Tip Group-General Purpose | 1 |
8j-9842 Tip Gp-Long
| 10***78 | Pin-G.E.T.; (Extreme Service) | 1 |
| 10***59 | Retainer As.-Ground Engaging Tool | 1 |
| 8J***42 | Tip Group-Long; -J-550, Heavy-Duty | 1 |
152-7822 Tip Gp-Penetration
| 14***16 | Retainer As | 1 |
| 15***18 | Pin | 1 |
| 15***22 | Tip Group-Penetration | 1 |
6i-6423 Tip Gp-Penetration
| 11***08 | Pin; (G.E.T.) | 1 |
| 11***09 | Retainer As; (G.E.T.) | 1 |
| 6I***23 | Tip Group-Penetration; -J-600 | 1 |
8j-9840 Tip Gp-Wide
| 10***78 | Pin-G.E.T.; (Extreme Service) | 1 |
| 10***50 | Tip-Wide | 1 |
| 10***59 | Retainer As.-Ground Engaging Tool | 1 |
5110B serial number reference
The PIN/serial plate on the 5110B is a riveted metal tag on the machine frame, typically on the upper structure near the cab entry/ladder area or lower frame rail on the right-hand side; it is stamped rather than painted-on. Read the first three characters as the letter prefix identifying the model/configuration series, and the digits that follow as the sequential unit number within that prefix run. Cross-check the full PIN against Cat SIS or a dealer, since Cat's serial format transitioned to a longer 17-character PIN in the early 2000s, around the same period this model's later prefixes were running.
| Prefix | Identifies | Notes |
|---|---|---|
| AAA | 5110B (standard/base mass-excavation configuration) | Base configuration of the 5110B mass-excavation hydraulic excavator, roughly 127,000 kg (280,000 lb) operating class. Engine: Cat 3412E, 12-cylinder, air-to-air aftercooled, twin turbo diesel. This is the entry serial range for the model line; exact launch year not documented in available sources beyond a general late-1990s window - verify with dealer if precise build year matters. |
| AAT | 5110B MH (material handler configuration) | MH build adds an auxiliary high-pressure hydraulic circuit for tool work (hammers, shears, thumbs, crushers) on the same base machine. Engine: Cat 3412E. The MH designation for this serial range is stated directly in service-manual titling for this prefix, and separately corroborated by a factory hydraulic-system manual covering the 5110B, 5110B L and 5110B MH together as one documented model family. |
| AAK | 5110B L (extended/long undercarriage configuration) - variant letter not directly confirmed, verify with dealer | L variant has an extended undercarriage plus longer boom and stick options, aimed at excavation, trenching, pipelaying and demolition work needing extra reach/stability. Engine: Cat 3412E. This prefix's tie to the 5110B family itself is solid: a lubrication (grease) pump attachment fitment reference lists S/N AAK1-and-up directly against the 5110B, independent of manual-listing sources. However no source directly labels this specific prefix run as the 'L' build - the L designation here is inferred by elimination (the base and MH prefixes are separately confirmed, leaving L as the remaining known configuration), so treat the variant label as provisional and confirm against the full PIN with a dealer. No credible build-year claim could be corroborated for this prefix; none is given. |
Frequently asked questions
What engine powers the Cat 5110B?
The Cat 3412E HEUI diesel: a 12-cylinder engine in two banks of six, air-to-air aftercooled, dual turbocharged, rated 565 kW (758 hp) gross and 519 kW (696 hp) net.
What is the 5110B's operating weight?
Roughly 125,000-129,000 kg (275,000-284,000 lb), around 127,000 kg (280,000 lb) for the standard configuration. Exact figure varies by undercarriage (standard vs. long/L) and bucket or configuration.
What replaced the Cat 5110B?
Cat discontinued the 5110B along with the rest of the 5000 series in 2006. There was no direct successor until 2015, when Cat introduced the 6015B hydraulic shovel, built on the 5110B's proven structures and undercarriage design.
What 5110B owners discuss
What do operators who've actually run a 5110B say about it compared to other large excavators?
Feedback from experienced operators is generally positive. The machine is described as smooth in operation, well balanced, and easy to place even though it works at the scale of a mining shovel. With a large bucket (in the 10-13 cubic yard class) and a skilled operator, load-and-carry cycle times stay tight and consistent. Some competing machines are noted as a touch faster on cycle, but the 5110B's stability and control feel are rated higher. It shows up in both mass-excavation pit work and heavy demolition (scrap shear, high-reach demolition) roles, which says something about how versatile the base machine is.
What's a known quirk of the 3412E HEUI fuel system on these machines?
Hard starting after the machine sits idle for a week or more is a recognized issue on 3412E HEUI engines. Later-style injectors use a check valve in the oil return circuit so oil doesn't drain back out between shutdowns, but on some builds hydraulic actuation pressure doesn't come up fast enough on a cold crank, so the ECM won't fire the injectors: no smoke, no start, even though the engine is turning over fine. A pre-lube cycle to fill the HEUI pump with oil before cranking helps, and it's a known workaround, not a sign the engine is bad. Otherwise the 3412E has a strong reputation for durability in this application.
Why does a 5110B run hot during operation, and what's the first thing to check?
Overheating that shows up after startup or under load is most often traced to a partially clogged radiator core, air trapped in the cooling system (especially after recent cooling-system or injector work), or a thermostat that isn't opening fully. Check for air pockets first if hoses or the radiator were recently disturbed, then move to radiator core condition and thermostat function. Persistent overheating that doesn't resolve with basic cooling-system service can point to injector or combustion issues driving extra heat load — have your dealer verify root cause before continuing to operate under full load.
What hydraulic symptoms on the 5110B point to a real problem versus normal wear?
Loss of working pressure, oil that runs hot, and jerky or hesitant boom/stick/swing movement are the classic signs of hydraulic trouble on this size of machine, and they almost always trace back to contamination in the system or internal leakage past worn pump or valve seals rather than a single failed part. Check fluid cleanliness and sight-gauge levels and look for external leaks at hose fittings and cylinder seals before assuming a pump or motor is failing internally.
What's the undercarriage and track wear pattern like on a machine this size, and how is it kept in check?
The 5110B undercarriage is built for mass-excavation duty: sealed and lubricated track joints, hydraulic track tensioning to keep tension constant, wide gauge and high ground clearance for stability. That sealed-and-lubricated design is meant to extend pin and bushing life without regreasing, but undercarriage wear is still one of the largest ongoing ownership costs on machines this size regardless of brand. Machines worked on hard, abrasive digging faces or rehandling coarse rock wear undercarriage faster than ones running in softer overburden, and demolition duty (paved/urban surfaces, lots of pivoting under load) wears differently than pit-style mass excavation. Track tension, roller and sprocket condition are worth inspecting on a set schedule rather than waiting for visible sag.
What electrical or control-system gremlins show up on these machines?
As with other electronically controlled Cat engines of this generation, ECM communication problems during startup and moisture intrusion at connectors are the recurring themes — corroded or damp connector pins generate unpredictable fault codes and can cause no-start or derate conditions that don't point to an obvious mechanical cause. A factory-level diagnostic tool is usually needed to pull real fault history rather than guessing from symptoms alone. Because these faults can mask or mimic fuel-system and safety-interlock problems, have your dealer verify the actual fault code and root cause rather than clearing codes and hoping it doesn't return.
What should a buyer check before purchasing a used 5110B?
Walk the structure first: look for cracked, dented, or repaired-and-repainted areas on the boom, stick, and mainframe, since this machine works in genuinely heavy digging conditions. On the engine, check for oil leaks at the block and listen for knocks or ticks on startup, and watch exhaust color under load (excess black, gray, or white smoke all mean something different worth chasing down). Run the hydraulics through full range of motion under load, not just at idle, to catch pressure loss or jerky operation. Inspect undercarriage wear (track shoes, rollers, sprockets, idlers) closely since replacement at this size is a major cost. Ask for service and maintenance records to confirm oil and hydraulic fluid intervals were kept up. Given the scale and cost of this machine, have your dealer verify structural and hydraulic condition with a proper inspection before final sale.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 5110B part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.