Caterpillarbackhoe loader(no series)
Caterpillar 450E
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 450E is a center-pivot backhoe loader and the largest model in Cat's E-series backhoe lineup, built for deep-dig and heavy-lift work in the 5.26 m (17 ft 3 in) dig-depth class, extending to roughly 6.50 m (21 ft 4 in) with the optional extendable E-Stick. It runs a Cat C4.4 ACERT four-cylinder turbo diesel rated 102 kW (137 hp) gross / 92 kW (124 hp) net, meeting Tier 3/Stage IIIA emissions. Standard operating weight is about 10,950 kg (24,141 lb), and it varies with cab or open ROPS canopy, stick length, counterweight, and attachments. Caterpillar introduced the 450E in 2007 as the replacement for the 446D, and offered it with AWD (4WD) or 2WD driveline, cab or canopy, and standard or extendable-stick backhoe configurations before the Tier 4-Interim 450F took over the model line in 2013.
The E-series generation moved the 450E onto electronically managed ACERT engine control and pilot-operated, accumulator-backed joystick hydraulics in place of the mechanically governed, lever-linkage controls typical of the D-series machine it replaced, paired with a single-stage torque-converter, multi-speed powershift transmission for smoother directional changes under load. Across its production run the 450E kept one engine and driveline architecture, which keeps parts interchangeable across model years and makes diagnosis more predictable than on backhoes that changed engine families mid-run. In the used and parts market today, the 450E remains in demand as a deep-dig, high-lift backhoe loader still young enough for strong Cat dealer parts support, while its straightforward powershift-and-pilot-hydraulics layout keeps rebuild costs and downtime lower than more electronically complex Tier 4 successors.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 450E specifications
Engine
| Engine model | Cat C4.4, 4-cylinder, turbocharged, direct-injection diesel |
| Displacement | 4.4 L (268 cu in) |
| Bore x stroke | 105 mm x 127 mm (4.13 in x 5.00 in) |
| Gross power (SAE J1995) | 102 kW (137 hp) |
| Net power (SAE J1349) at 2,200 rpm | 92 kW (124 hp) |
| Peak torque at 1,400 rpm | 515 Nm (380 lb-ft) |
| Emissions certification | EPA Tier 3 / EU Stage III A |
Weights
| Standard operating weight | 10,950 kg (24,141 lb) |
| Maximum operating weight (fully configured, e.g. extendable stick and attachments) | 12,300 kg (27,115 lb) |
| Shipping weight | Not published as a separate figure; tracks close to standard operating weight above |
| Ground pressure | Not published — wheeled machine on tires, no ground-pressure spec applies |
Dimensions
| Transport length | 7.91-7.92 m (26 ft) |
| Transport width | 2.44 m (8 ft) |
| Transport height, boom stowed | 4.14-4.17 m (13 ft 7 in - 13 ft 8 in) |
| Wheelbase | 2.20-2.21 m (87 in / 7 ft 3 in) |
| Ground clearance | 0.32 m (12.7 in) |
| Cab height | 2.87 m (9 ft 5 in) |
| Loader bucket width, general purpose bucket | 2.44 m (8 ft) |
Performance
| Maximum travel speed, forward | 40 km/h (24.9-25 mph) |
| Maximum travel speed, reverse | 27.3-27.4 km/h (17 mph) |
| Backhoe dig depth, standard stick | 5.26 m (17 ft 3 in) |
| Backhoe dig depth, extendable stick (E-stick) | 6.50 m (21 ft 4 in) |
| Backhoe reach from swing pivot at ground line, standard stick | 6.70-6.71 m (22 ft - 22 ft 1 in) |
| Backhoe reach from swing pivot at ground line, E-stick | 7.88 m (25 ft 10 in) |
| Loader maximum lift capacity at full height | 3,570 kg (7,871 lb) |
| Loader breakout force | 5,160-5,340 kg (11,375-11,750 lb); figure varies by source |
| Backhoe bucket digging force | 8,050-8,073 kg (17,746-17,760 lb) |
| Backhoe stick (crowd) digging force, standard stick | 5,340-5,365 kg (11,780-11,800 lb) |
| Backhoe stick (crowd) digging force, E-stick | 4,087 kg (8,992 lb) |
| Loader bucket capacity, heaped, general purpose bucket | 1.34 m3 (1.75 yd3) |
| Gradeability / drawbar pull | Not published for this machine class |
Service capacities (summary)
| Fuel tank | 145 L (38.4 gal) |
| Hydraulic system | 100 L (26.5 gal) |
| Engine oil, with filter | 8.3-8.5 L (2.2 gal) |
| Cooling system | 25.6-25.7 L (6.8 gal) |
| Transmission | 21.0-21.2 L (5.6 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
450E fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase, with filter (Cat C4.4 ACERT, Tier 3) | 8.3–8.5 L (2.2 US gal) | Cat DEO (Diesel Engine Oil), SAE 15W-40 for normal ambient range. Use Cat DEO Cold Weather or a synthetic Cat DEO-ULS/DEO SYN blend for cold-climate starts per the ambient-temperature viscosity guide. Change with every filter service. |
| Cooling system | 25.6–25.7 L (6.8 US gal); 24.2 L (6.4 US gal) on A/C-equipped units | Cat ELC (Extended Life Coolant/Antifreeze), pre-mixed 50/50 formulation. Do not top off with a different coolant brand or chemistry; mixing shortens additive life and voids the extended-life interval. |
| Fuel tank | 145 L (38.4 US gal) | Ultra-low sulfur No. 2-D diesel fuel meeting the Cat C4.4 fuel specification. Use a winterized/No. 1-D blend or an anti-gel additive in cold weather. |
| Powertrain / transmission (5F/3R auto-shift, single-stage torque converter) | 21.0–21.2 L (5.6 US gal) | Cat TDTO (Trans/Drive Train Oil). SAE 10W for cold starts, SAE 30 for normal to warm ambient, per the Lubricant Viscosities table for this drivetrain. |
| Front axle (4WD) differential/final drive housing | approx. 11.0 L (2.9 US gal) | Cat TDTO, same viscosity grade selected for the transmission. |
| Front axle planetary wheel-end housings, each side | approx. 0.8 L (0.2 US gal) | Cat TDTO. |
| Rear axle differential/final drive housing | approx. 18.9 L (5.0 US gal) | Cat TDTO, same viscosity grade selected for the transmission. |
| Hydraulic system, total (tank, lines, cylinders — closed-center load-sensing circuit) | 100 L (26.5 US gal) | Cat HYDO Advanced multi-viscosity hydraulic oil (SAE 10W, 30, or equivalent grade chosen by ambient temperature). Warm the oil by idling before high-load operation in cold weather. |
| Hydraulic tank (reservoir only) | approx. 50.0 L (13.2 US gal) | Cat HYDO Advanced, matched to the grade used for the full hydraulic system. |
| Grease, all chassis and loader/backhoe linkage lube points | spec only, no fill capacity | Cat Prime Application Grease or Cat Advanced 3Moly Grease, NLGI 2, molybdenum-fortified for pivot pins and bushings. Apply at the daily/50-hour lube interval or per the grease-point chart. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 450E maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 3,000 h |
|
| Every 6,000 h |
|
Servicing the 450E beyond the schedule
Predictive Maintenance & Fluid Analysis
Use Cat S·O·S sampling on engine, hydraulic (HYDO Advanced), transmission, and front and rear axle oil at each scheduled draw to catch wear metals before the C4.4 ACERT turbo, torque-converter powershift, or differential carriers fail outright. HYDO Advanced lets the hydraulic tank interval stretch well past the base drain figure when sample results stay clean; skipping S·O·S and guessing at the change forfeits that extension. Track coolant condition annually, since scale building in the C4.4 block shows up as slow overheating before a temperature gauge alarms.
Corrective & Common Repairs
Most 450E complaints trace to the pilot-hydraulic joystick circuit and its accumulator, worn center-pivot and stabilizer pins, or a slipping single-stage torque converter. Weeping loader-lift or backhoe-stick cylinder seals show up first as slow, spongy motion under load; reseal before rod scoring worsens. Front-axle U-joints and the AWD driveline take the brunt of loader work and warrant regular boot and joint checks. Hard or delayed powershift engagement usually points to low oil, a clogged filter, or worn clutch packs rather than the valve body itself.
Overhaul & Rebuild Points
The C4.4 ACERT typically reaches a top-end or inframe rebuild window well into its second service life; watch oil consumption and blow-by as the leading indicators before a full teardown. Torque converter and powershift clutch packs are the next major wear group on a machine worked hard in loader duty. Backhoe boom, stick, and swing-frame bushings wear steadily under repetitive digging cycles and should be measured against service limits at major overhauls, along with the front differential and final drive carriers on AWD units.
Seasonal & Environment Servicing
Cold-climate 450E units need a block heater and correct coolant concentration checked before winter, plus a verified air-inlet heater, since the safety decals on this engine explicitly bar ether as a starting aid. In hot, dusty digging environments, clean the radiator, hydraulic oil cooler, and engine air filter more often than the standard interval to protect the turbocharged C4.4 from heat soak. Wet or muddy sites accelerate stabilizer-pad, pivot-pin, and front-axle seal wear, so shorten grease intervals and rinse mud from cooling fins daily.
450E common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 289-0600 | Filter-Fuel | Fuel system service | Check fitment → |
| 298-4603 | Filter As-Fuel | Fuel system service | Check fitment → |
| 299-8229 | Filter-Fuel | Fuel system service | Check fitment → |
| 311-2376 | Filter As-Fuel | Fuel system service | Check fitment → |
| 308-7298 | Filter As-Water Sep & Fuel | Fuel system service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
450E fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| E360 | Event code for low engine oil pressure. Oil pressure has dropped below the safe level for the current engine speed. | Low oil level, a plugged oil filter, a worn oil pump, or a failed oil pressure sensor. | Stop the engine and check oil level and condition first. Inspect the filter and pump if level is correct, then verify the sensor before restart. |
| E361 | Event code for high engine coolant temperature. Severity escalates through warning, power derate, and automatic shutdown levels. | Low coolant, a blocked radiator or fins, a slipping or failed fan drive, a stuck thermostat, or a failed coolant temperature sensor. | Let the engine cool, check coolant level and radiator for debris, confirm fan operation, then verify the sensor reading against a hand gauge. |
| CID 110-03 (MID 036) | Engine coolant temperature sensor circuit reading voltage above normal, flagged by the engine ECM. | Open circuit or short to a voltage source in the sensor wiring or connector, or a failed sensor. | Inspect the sensor connector and wiring for damage or corrosion, test sensor resistance against spec, replace the sensor if out of range. |
| CID 100 (FMI 03/04) | Engine oil pressure sensor circuit fault, voltage reading above or below the normal range. | Damaged sensor wiring, a bad connector, or a failed pressure sensor. | Check wiring and connector first, then test the sensor. Replace only after confirming the circuit itself is intact. |
| CID 164 (FMI 03/04) | Fuel injection actuation/rail pressure sensor signal out of range on the common-rail fuel system. | Sensor or wiring fault, or an actual low or unstable rail pressure from the high-pressure pump or a leaking injector. | Check the sensor circuit first, then verify actual rail pressure with diagnostic software against spec before condemning the pump. |
| CID 168 (FMI 03/04) | System/battery voltage reading above or below the normal range at the ECM. | A weak or failing alternator, a loose or worn drive belt, corroded battery terminals, or a parasitic electrical draw. | Test charging voltage at the battery with the engine running, inspect belt tension, clean and tighten battery connections. |
| CID 247 (FMI 09) | Data link communication fault between the machine ECM and the cab monitor/display. | Damaged data link wiring or connectors, a poor ground, or an ECM communication mismatch. | Inspect data link wiring, connectors, and ground straps between ECMs; confirm all modules are communicating before replacing any component. |
| CID 702 | Transmission/gear selector position sensor circuit fault. | A worn or misaligned selector sensor, damaged wiring, or a sensor out of calibration. | Check selector linkage and sensor wiring, recalibrate or replace the sensor if the signal is out of spec. |
| CID 2997-03 | Implement (loader/backhoe) load-sense hydraulic pressure sensor reading voltage above normal. | Damaged sensor wiring or connector, or a failed load-sense pressure sensor. | Inspect the sensor circuit and connector, test sensor output against spec, replace if faulty. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
450E attachments & work tools
Backhoe buckets - heavy duty
Factory heavy-duty backhoe buckets run 457-914 mm (18-36 in) wide with weld-on adapters and pin-on teeth, capacity roughly 0.19-0.48 m3 (6.7-17.0 ft3). Tooth count scales with width, from 3 teeth on the 457 mm bucket up to 6 teeth on the 914 mm bucket.
Backhoe ditch cleaning buckets
Smooth-edge ditch cleaning buckets come in 1219, 1372 and 1524 mm (48, 54 and 60 in) widths, roughly 0.45-0.57 m3 (0.59-0.75 yd3) capacity, for grading and trench cleanup work.
Loader buckets
The single-tilt loader takes a 2434 mm (8 ft) general-purpose bucket at 1.34 m3 (1.75 yd3), or a 2425 mm (7 ft 11 in) multi-purpose 4-in-1 bucket at 1.15 m3 (1.5 yd3). The multi-purpose bucket is offered with or without an integrated fold-over pallet fork.
Hydraulic hammers
Factory-fit backhoe hammers are H90C and H100 class, each offered as a standard flat-top or a silenced (S) version, adding roughly 700 to 1,040 kg (1,560 to 2,280 lb) to machine weight. This is a heavier breaker class than the smaller hammers matched to the lighter 415 to 444 backhoe loader range - verify exact fitment against stick and auxiliary flow before ordering.
Hydraulic thumb
A stick-mounted hydraulic thumb is sized to the bucket in use: 356 mm (14 in) wide for the 914 mm (36 in) heavy-duty bucket, or 445 mm (17.5 in) wide for the 610-762 mm (24-30 in) heavy-duty buckets. Thumb-mounting provisions on the stick are standard on every machine, with the thumb itself a factory-installable option.
Vibratory plate compactor
A CVP40 vibratory compactor plate mounts on the backhoe stick for trench and utility-cut compaction, running off the one-way auxiliary hydraulic circuit.
Quick couplers
The loader side accepts an Integrated Toolcarrier (IT) quick coupler for fast bucket and work-tool changes; the backhoe side offers a pin-puller quick coupler. Both are factory or dealer-installed options rather than standard equipment.
Brooms
IT-interface loader brooms include the angle broom in hydraulic, hydraulic-with-water-kit, or manual-drive versions, plus a hydraulic pick-up broom for street sweeping and site cleanup.
Loader work tools (IT interface)
Additional IT-mount loader tools include a 2438 mm (96 in) general-purpose bucket at 1.5 m3 (2.0 yd3), a 1219 mm (48 in) tine pallet fork, an 2108 mm (83 in) rake in two duty/weight classes, a 2819 mm (111 in) hydraulic angle blade, a 470 mm (18.5 in) asphalt cutter, and profile, blank and flat-back hooks for material handling.
Auxiliary hydraulic circuits
The backhoe runs 5-function hydraulics as standard. Optional combined-function auxiliary lines are offered for the standard stick or the extendible E-Stick, plus a one-way-function E-Stick line, to power tools such as hammers, compactors and thumbs. Standard quick disconnects allow fast swaps between one-way and two-way flow tools.
Extendible stick (E-Stick)
The optional E-Stick extends dig depth and reach by about 1.26 m (4.14 ft) over the standard stick, useful for reach-limited attachment work such as ditching or deep trenching. Stick dig force and lift capacity drop somewhat versus the standard/retracted stick when extended.
Guarding and protection options
Standard guarding includes an engine fan guard, front driveshaft guard, stabilizer cylinder rock guards, and a radiator guard with rubber impact strips. The ROPS canopy package adds a rotating vandal guard over the operator area, and a magnetic-mount rotating beacon is available as a separate option.
All 450E assemblies by section
Every catalogued assembly group for the Caterpillar 450E. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
273-4707 Air Cleaner Gp -Turbo
| 20***73 | Clamp-V Band | 1 |
| 20***81 | Clamp | 1 |
| 21***33 | Clamp | 2 |
254-0116 Air Cleaner Gp -Turbo
| 20***27 | Bracket | 1 |
| 25***16 | Air Cleaner Group; -Turbo | 1 |
| 25***92 | Connector-Filter | 1 |
303-5777 Elbow Gp-Air Inlet
| 21***29 | Clamp As | 2 |
| 27***85 | Plate As | 1 |
| 27***96 | Muffler As | 1 |
278-3492 Extension Gp-Exhaust
| 03***47 | Ferrule | 3 |
| 03***91 | Nut | 1 |
| 03***14 | Nut; (7/16-In) | 1 |
278-6399 Indicator Gp-Air Filter Change
| 03***47 | Ferrule | 2 |
| 03***14 | Nut; (7/16-In) | 1 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
254-0149 Lines Gp-Air
| 11***25 | Screw-Flat Head; (M6x1x25-mm) | 3 |
| 16***95 | Knob | 1 |
| 24***07 | Grommet | 1 |
254-0117 Muffler Gp -Turbo
| 20***77 | Pedal Group-Governor | 1 |
| 23***90 | Lever Group-Governor | 1 |
| 25***17 | Muffler Group; -Turbo | 1 |
303-5776 Turbocharger Gp
| 27***38 | Protection Group-Fuel System; (Line, Low Pressure) | 1 |
| 28***00 | Filter-Fuel; (Ultra High Efficiency) | 1 |
| 29***03 | Filter As-Fuel; (Primary) | 1 |
307-4410 Turbocharger Gp
| 27***38 | Protection Group-Fuel System; (Line, Low Pressure) | 1 |
| 29***29 | Filter-Fuel; (Ultra High Efficiency)(Secondary) | 1 |
| 30***10 | Turbocharger Group | 1 |
Basic Engine
298-5090 Camshaft Gp
| 1B***36 | Key-Woodruff | 1 |
| 27***26 | Rod-Push | 8 |
| 29***90 | Camshaft Group | 1 |
298-5111 Cover Gp-Engine
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 11***22 | Bolt; (M8x16-mm) | 5 |
| 21***03 | Washer; (Sealing) | 1 |
322-9477 Cover Gp-Valve Mechanism
| 27***31 | Bolt-Special; (Shoulder) | 7 |
| 27***64 | Seal-O-Ring | 2 |
| 27***65 | Circlip | 2 |
364-2829 Crankshaft Gp
| 19***51 | Seal-O-Ring | 1 |
| 23***22 | Plug | 1 |
| 27***16 | Plug-Core | 4 |
298-5086 Crankshaft Gp
| 03***90 | Washer-Thrust; (Standard-Upper)(Upper) | 2 |
| 03***91 | Washer-Thrust; (Standard-Lower)(Lower) | 2 |
| 06***73 | Washer-Thrush (Upper) .18mm (.007in) | 0 |
330-1736 Crankshaft Gp
| 20***19 | Bolt; (M8x1.25x16-mm) | 10 |
| 23***49 | Housing As | 1 |
| 33***36 | Crankshaft Group | 1 |
359-0716 Crankshaft Gp
| 03***63 | Plug | 1 |
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 06***02 | Dowel | 10 |
298-5085 Cylinder Block Gp
| 22***01 | Bolt; (M15x1.5x137-mm) | 10 |
| 29***26 | Cylinder Head As | 1 |
| 29***85 | Cylinder Block Group | 1 |
330-4789 Cylinder Block Gp
| 11***59 | Bolt; (M10x1.5x35-mm) | 8 |
| 25***37 | Plate | 1 |
| 32***80 | Housing-Fan Drive | 1 |
298-4526 Cylinder Head As
| 03***87 | Ring-Starting Motor; (126-Teeth) | 1 |
| 0S***03 | Bolt,Machine Fuel Pump Drive Gear Mounting | 10 |
| 24***28 | Flywheel As | 1 |
298-5088 Cylinder Head Gp
| 06***79 | Dowel | 1 |
| 10***51 | Bolt; (M8x1.25x65-mm) | 5 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
303-5770 Drive Gp-Fan
| 10***17 | Plug | 3 |
| 11***63 | Bolt; (M8x1.25x12-mm) | 2 |
| 12***83 | Bolt; (M10x1.5x30-mm) | 6 |
303-5768 Flywheel Gp
| 27***51 | Plate-Lifting | 1 |
| 29***04 | Plate-Lifting | 1 |
| 30***68 | Flywheel Group | 1 |
298-5110 Gear Gp-Front
| 10***87 | Plug | 6 |
| 19***32 | Support-Front; (Lh) | 1 |
| 19***34 | Support-Front; (Rh) | 1 |
303-5767 Housing Gp-Flywheel
| 28***30 | Mount As | 1 |
| 28***31 | Pad-Rebound | 1 |
| 30***67 | Housing Group-Flywheel | 1 |
298-5127 Lifting Gp-Engine
| 27***09 | Mounting Group-Engine & Tmsn | 4 |
| 29***27 | Lifting Group-Engine | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 12 |
303-5778 Mounting Gp-Engine
| 06***13 | Gasket | 1 |
| 10***71 | Bolt | 4 |
| 22***05 | Gasket | 1 |
273-7309 Mounting Gp-Engine & Tmsn
| 12***36 | Ring-Retaining | 2 |
| 22***38 | Bushing | 1 |
| 22***39 | Bolt-Special; (Connecting Rod) | 2 |
294-7370 Mounting Gp-Engine & Xmsn
| 19***51 | Seal-O-Ring | 1 |
| 23***22 | Plug | 1 |
| 29***70 | Mounting Group-Engine & Xmsn | 1 |
322-9476 Pan Gp-Oil
| 2B***58 | Plug--To Block Upper Front Air Manifold | 3 |
| 32***76 | Pan Group-Oil | 1 |
298-5087 Piston & Rod Gp
| 27***00 | Plug-Shaft End | 2 |
| 27***01 | Circlip | 1 |
| 27***06 | Spring-Shaft | 3 |
298-5129 Plug Gp-Cylinder Head
| 29***33 | Rocker Arm Group | 1 |
| 29***29 | Plug Group-Cylinder Head | 1 |
| 33***97 | Link | 8 |
298-5131 Plug Gp-Engine
| 11***27 | Screw-Machine; (M6x1x30-mm) | 2 |
| 12***78 | Locknut; (M6x1-Thd) | 2 |
| 13***00 | Spacer; (11x25x50-mm Thk) | 1 |
298-5101 Pulley Gp-Crankshaft
| 29***01 | Pulley Group-Crankshaft | 1 |
| 30***37 | Seal-O-Ring | 1 |
| 32***61 | Filler As-Oil | 1 |
298-4533 Rocker Arm Gp
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 11***08 | Clip | 1 |
| 12***71 | Clamp-Hose | 1 |
298-5089 Rocker Arm Gp
| 10***61 | Bolt; (M10x1.50x50-mm) | 5 |
| 22***29 | Pump As-Engine Oil | 1 |
| 29***89 | Rocker Arm Group | 1 |
Braking System
288-7228 Brake Gp-Service
| 11***42 | Door Group-Battery | 1 |
| 11***54 | Tread | 1 |
| 16***76 | Step As | 1 |
261-5517 Control Gp-Parking Brake
| 12***41 | Latch As-T-Bar | 1 |
| 15***63 | Door As | 1 |
| 26***17 | Control Group-Parking Brake | 1 |
206-1642 Control Gp-Parking Brake
| 06***05 | . Ring; Slide, Washer; (26x63.5x6-mm Thk) | 4 |
| 20***42 | Control Group-Parking Brake | 1 |
| 27***92 | Counterweight | 1 |
254-0126 Control Gp-Service Brake
| 09***41 | Screw; (Machine) (M6x1thd) | 7 |
| 25***26 | Control Group-Service Brake | 1 |
| 27***95 | Enclosure | 1 |
163-0753 Lever Gp-Hand Control
| 09***41 | Screw; (Machine) (M6x1thd) | 7 |
| 16***53 | Lever Group-Hand Control; -Parking Brake | 1 |
| 27***94 | Enclosure; (Lh) | 1 |
Cooling System
301-8243 Connection Gp-Water
| 10***71 | Bolt | 2 |
| 22***44 | Gasket; (Engine Oil Filter Base) | 2 |
| 23***51 | Plate; (Blanking) | 1 |
266-0149 Cooler & Mtg Gp-Eng & Hydr
| 22***44 | Gasket; (Engine Oil Filter Base) | 2 |
| 23***51 | Plate; (Blanking) | 1 |
| 24***74 | Head As-Oil Filter; (Engine) | 1 |
254-0150 Cooler Ar-Engine & Hydraulic
| 10***51 | Bolt; (M8x1.25x65-mm) | 2 |
| 25***50 | Cooler Ar-Engine & Hydraulic | 1 |
| 35***14 | Cooler-Oil | 1 |
273-3137 Cooler Gp-Engine & Hydraulic
| 20***54 | Spacer-Fan | 1 |
| 26***71 | Plate | 1 |
| 26***06 | Belt Tensioner | 1 |
353-7717 Cooler Gp-Engine Oil
| 11***29 | Bolt; (M8x1.25x75-mm) | 7 |
| 22***38 | Seal-O-Ring | 1 |
| 22***19 | Gasket | 1 |
298-5099 Cooler Gp-Engine Oil
| 14***39 | Connector As. | 1 |
| 14***60 | Elbow Group | 1 |
| 14***92 | Elbow; (-12 Orfs/-12 Orfs Swivel) | 1 |
254-0113 Fan Gp-Suction -With Air Conditioner
| 09***55 | Clamp-Hose | 1 |
| 12***71 | Clamp-Hose | 2 |
| 12***78 | Locknut; (M6x1-Thd) | 1 |
254-0112 Fan Gp-Suction -Without Air Conditioner
| 11***29 | Bolt; (M8x1.25x75-mm) | 7 |
| 22***38 | Seal-O-Ring | 1 |
| 22***19 | Gasket | 1 |
254-0147 Lines Gp-Transmission Cooler
| 25***47 | Lines Group-Transmission Cooler | 1 |
| 27***75 | Filter Element-Air; (Primary)(Air Cleaner) | 1 |
| 27***76 | Filter Element-Air; (Cleaner) | 1 |
298-5105 Pump Gp-Water
| 11***22 | Bolt; (M8x16-mm) | 4 |
| 11***79 | Gasket | 2 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 4 |
Electrical And Starting System
317-9776 Alternator Gp-Charging
| 13***65 | Receptacle As | 1 |
| 13***13 | Kit-Seal; (Water Jacket) | 1 |
| 13***17 | Cap As-Dust | 0 |
263-0992 Battery Gp -Heavy-Duty
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***78 | Locknut; (M6x1-Thd) | 4 |
304-6436 Control Gp-Engine Electronic
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***74 | Cover-Connector; (Wire Router) | 1 |
262-1421 Electronics Gp-Communication -Product Link 300
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 20***14 | Lens As; (Floodlight) | 1 |
| 23***30 | Body As; (Floodlight) | 1 |
290-6776 Electronics Gp-Machine -Non-Accugrade
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 20***11 | Lens As | 1 |
| 23***30 | Body As; (Floodlight) | 1 |
298-5125 Glow Plug Gp
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 20***11 | Lens As | 1 |
| 23***30 | Body As; (Floodlight) | 1 |
248-2214 Heater Gp-Jacket Water -120-Volt
| 17***34 | Plug As; (Warning Beacon) | 1 |
| 24***14 | Heater Group-Jacket Water; -120-Volt | 1 |
| 27***00 | Lens; (Amber)(Warning Beacon) | 1 |
225-7995 Installation Gp-Communication -Product Link 300
| 11***90 | Fuse; (10 Amp) | 11 |
| 11***91 | Fuse; (15-Ampere) | 13 |
| 11***92 | Fuse; (20 Amp) | 10 |
225-7994 Installation Gp-Communication -Product Link 121sr
| 08***48 | Lamp; (12-Volt, 5-Watt) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
290-5760 Lamp Gp-Flood
| 1H***44 | Lockwasher (Bracket To Cab) | 2 |
| 26***01 | Fuse; (60-Ampere)(Power, 1) | 2 |
| 26***11 | Seal | 1 |
234-4329 Lamp Gp-Flood
| 1H***44 | Lockwasher (Bracket To Cab) | 2 |
| 23***29 | Lamp Group-Flood; -Front, Side, Long Range | 1 |
| 26***11 | Seal | 1 |
234-4328 Lamp Gp-Flood
| 1H***44 | Lockwasher (Bracket To Cab) | 2 |
| 23***28 | Lamp Group-Flood; -Front, Rear, Wide Range | 1 |
| 26***11 | Seal | 1 |
180-3664 Lamp Gp-Warning Beacon -Amber, Magnetic Mount, Rotating
| 18***64 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 2 |
| 26***01 | Fuse; (60-Ampere)(Power, 1) | 1 |
211-4277 Lighting Gp-Flood & Signal -Nacd, Optional
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 3 |
| 21***77 | Lighting Group-Flood & Signal; -Nacd, Optional, 8-Lamp, Cab | 1 |
211-4292 Lighting Gp-Warning Beacon -Amber, Magnetic Mount, Rotating
| 21***92 | Lighting Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 30***95 | Starting Motor-Electric | 1 |
| 6I***64 | Stud; (M10x1.5x30-mm) | 3 |
247-8199 Panel Gp-Fuse -Includes Relay
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***39 | Relay As | 1 |
| 21***92 | Switch As-Rocker; (All Wheel Drive) | 1 |
275-0490 Relay Gp -Starting Aid Heater
| 10***74 | Seal-Connector | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 2 |
276-7290 Relay Gp
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 27***90 | Relay Group; -Power, 1 | 1 |
276-7287 Relay Gp -Power Distribution
| 27***87 | Relay Group; -Power Distribution | 1 |
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
276-7291 Relay Gp -Power, 2
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***15 | Relay As; (12-Volt)(Junction Box) | 1 |
| 18***58 | Suppressor-Arc | 1 |
266-1467 Sensor Gp-Position -Rotary
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 21***40 | Harness As-Console; (Front) | 1 |
| 21***16 | Switch As-Rocker; (Transmission Neutral Lock) | 1 |
303-5769 Starting Motor Gp-Electric -12-Volt
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***87 | Start Switch Assembly; (Key)(Engine) | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 15***55 | Kit; (Connecting Plug) (12-Pin) (Includes Plug As Wedge & Interface Seal) | 1 |
211-4267 Switch Gp-All Wheel Drive -Includes Relay
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 34 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
202-6010 Switch Gp-Differential Lock -Center Pivot Machine
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 15***55 | Kit; (Connecting Plug) (12-Pin) (Includes Plug As Wedge & Interface Seal) | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 2 |
158-6634 Switch Gp-Toggle
| 15***34 | Switch Group-Toggle; -Stairway Access Lights | 1 |
| 26***57 | Harness As-Auxiliary; (Rear) | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 3 |
287-2102 Wiring Gp-Air Conditioner
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 2 |
| 10***74 | Seal-Connector | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
211-4245 Wiring Gp-Console -Front
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 2 |
| 10***74 | Seal-Connector | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
263-0925 Wiring Gp-Console -Side
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 17 |
| 10***05 | Cap-Receptacle | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
290-6767 Wiring Gp-Control
| 16***39 | Alarm As | 1 |
| 18***58 | Suppressor-Arc | 2 |
| 19***65 | Clip | 2 |
290-6768 Wiring Gp-Control
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
267-5635 Wiring Gp-Control -Joystick, Lh
| 17***39 | Receptacle As; (Power Supply) | 1 |
| 26***35 | Wiring Group-Control; -Joystick, Lh | 1 |
263-0958 Wiring Gp-Engine
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
298-5130 Wiring Gp-Engine
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 6 |
| 09***56 | Screw-Machine; (M5x0.8x16-mm) | 4 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
263-0924 Wiring Gp-Platform
| 09***47 | Nut-Thin; (M16x2 Thd) | 2 |
| 15***44 | Plug As-Drain; (Magnetic)(Final Drive Planetary) | 3 |
| 15***04 | Bearing | 2 |
211-4271 Wiring Gp-Power Receptacle
| 09***87 | Bolt-Socket Head; (M14x2x45-mm) | 24 |
| 15***44 | Plug As-Drain; (Magnetic)(Final Drive Planetary) | 3 |
| 15***45 | Plug-Magnetic; (Transfer Drive) | 2 |
263-0960 Wiring Gp-Rear -Backup Alarm
| 13***08 | Bearing As-Tapered Roller | 1 |
| 15***44 | Plug As-Drain; (Magnetic)(Final Drive Planetary) | 1 |
| 19***95 | Bolt; (M6x1x14-mm) | 2 |
211-4259 Wiring Gp-Ride Control
| 09***85 | Bolt-Socket Head; (M14x2x30-mm) | 12 |
| 09***41 | Bearing As; (Tapered Roller) | 1 |
| 16***13 | Kit-Cam; (Counterclockwise)(Parking Brake) | 1 |
225-7996 Wiring Gp-Stabilizer
| 20***55 | Pin | 1 |
| 21***92 | Washer-Thrust; (22x42x2-mm Thk) | 2 |
| 21***87 | Cover; (Differential Case) | 1 |
211-4254 Wiring Gp-Transmission Control -Autoshift, Standard Shift
| 19***56 | Bearing | 2 |
| 19***59 | Seal-Pin | 4 |
| 19***08 | Pin | 3 |
Engine Arrangement
254-0120 Engine Ar
| 20***76 | Control Group-Governor | 1 |
| 25***15 | Engine Ar-Primary | 1 |
| 25***16 | Air Cleaner Group; -Turbo | 1 |
254-0115 Engine Ar-Primary
| 25***15 | Engine Ar-Primary | 1 |
| 29***23 | Cylinder Block Group-Short | 1 |
| 29***85 | Cylinder Block Group | 1 |
Frame And Body
253-0784 Box Gp-Battery -With Storage
| 20***32 | Plate As | 1 |
| 22***46 | Plate As | 1 |
| 23***65 | Plate As | 1 |
254-0145 Counterweight Gp
| 08***74 | Connector | 1 |
| 11***99 | Bolt; (M24x3x80-mm) | 8 |
| 20***77 | Cap & Bearing As | 1 |
118-6842 Door Gp-Battery
| 11***42 | Door Group-Battery | 1 |
| 13***30 | Rod | 1 |
| 13***22 | Bushing | 1 |
294-9539 Enclosure Gp-Engine -Lh
| 21***15 | Film-Instruction; (Engine Shutoff) | 1 |
| 24***80 | Bumper As | 2 |
| 27***77 | Hood Group-Engine | 1 |
294-9538 Enclosure Gp-Engine -Rh
| 27***26 | Guard As | 1 |
| 29***38 | Enclosure Group-Engine; -Rh | 1 |
| 8T***38 | Bolt-Pipe As To Main Pump Suction Port | 4 |
249-9328 Extension Gp-Fender
| 21***15 | Film-Instruction; (Engine Shutoff) | 1 |
| 24***80 | Bumper As | 2 |
| 24***28 | Extension Group-Fender | 1 |
201-3954 Fender Gp-Front
| 20***54 | Fender Group-Front | 1 |
| 25***81 | Spring As-Gas; (Rh) | 1 |
| 25***01 | Spring As-Gas; (Lockable)(Lh) | 1 |
213-1891 Fender Gp-Rear
| 12***43 | Seal; (70-cm) | 0 |
| 21***91 | Fender Group-Rear | 1 |
| 24***95 | Bracket As | 1 |
284-2753 Floorplate Gp
| 12***43 | Seal; (70-cm) | 0 |
| 24***95 | Bracket As | 1 |
| 25***78 | Film-Identification; (Cat) | 1 |
284-2757 Floorplate Gp
| 28***57 | Floorplate Group | 1 |
265-6811 Frame As -Loader
| 15***06 | Valve-Gas | 1 |
| 16***96 | Service Kit; (Includes Seals) | 1 |
| 17***03 | Film-Warning; (Accum, High Press, Read Omm)(Plate-Name) | 1 |
265-6810 Frame Gp-Loader
| 26***10 | Frame Group-Loader | 1 |
269-8216 Frame Gp-Swing
| 16***60 | Accumulator Group-Ride Control; -Charged | 1 |
| 26***16 | Frame Group-Swing | 1 |
254-0111 Guard Gp-Drive Shaft
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 21***94 | Switch As-Rocker; (Mode Select) | 1 |
| 21***06 | Switch As-Rocker; (Auxiliary Hydraulic Flow)(Continuous Flow) | 1 |
254-0107 Hood & Guard Gp
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 21***94 | Switch As-Rocker; (Mode Select) | 1 |
| 21***06 | Switch As-Rocker; (Auxiliary Hydraulic Flow)(Continuous Flow) | 1 |
270-1592 Hood Gp-Engine
| 16***12 | Wire As | 1 |
| 22***57 | Plug-Hole | 3 |
| 25***65 | Lines Group-Stabilizer | 1 |
270-1577 Hood Gp-Engine
| 16***12 | Wire As | 1 |
| 22***57 | Plug-Hole | 3 |
| 25***65 | Lines Group-Stabilizer | 1 |
Fuel System
288-8045 Control Gp-Governor
| 28***45 | Fuel Drain Manifold, Control Group-Governor | 1 |
| 30***98 | Filter As-Water Sep & Fuel | 1 |
| 30***76 | Filter Group-Water Sep & Fuel | 1 |
209-3376 Control Gp-Governor
| 20***76 | Control Group-Governor | 1 |
| 27***38 | Protection Group-Fuel System; (Line, Low Pressure) | 1 |
| 29***29 | Filter-Fuel; (Ultra High Efficiency)(Secondary) | 1 |
298-5123 Filter Gp-Primary Fuel
| 11***08 | Clip | 4 |
| 16***25 | Clip | 1 |
| 17***39 | Clamp | 2 |
263-7148 Filter Gp-Water Sep & Fuel
| 10***15 | Bolt; (M8x1.25x10-mm) | 1 |
| 11***63 | Bolt; (M8x1.25x12-mm) | 2 |
| 21***09 | Fitting; (Quick Disconnect, Female) | 1 |
320-0680 Injector Gp-Fuel
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 10***95 | Bolt; (M8x1.25x35-mm) | 4 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 4 |
254-0119 Lines Gp-Fuel
| 11***85 | Seal-O-Ring; (13.94mm Id) | 1 |
| 22***72 | Fitting-Fuel | 2 |
| 22***00 | Seal-O-Ring | 3 |
298-5120 Lines Gp-Fuel
| 24***01 | Tread | 1 |
| 24***03 | Step As | 1 |
| 24***04 | Tank Group-Fuel | 1 |
314-9819 Lines Gp-Fuel Filter
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***32 | Cover | 1 |
| 18***82 | Screw-Pan Head; (M6x1x16-mm) | 5 |
303-4625 Pump Gp-Fuel Injection
| 10***20 | Gasket | 1 |
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 2 |
| 18***30 | Strainer-Fuel; (Filler Neck Screen) | 1 |
324-0532 Pump Gp-Fuel Injection
| 03***17 | Tread-Nonskid | 2 |
| 12***76 | Tube-Heat Shrink; (17.78-mm Dia)(140-cm) | 0 |
| 15***75 | Ladder Clip | 2 |
352-6584 Pump Gp-Fuel Injection
| 03***17 | Tread-Nonskid | 2 |
| 12***76 | Tube-Heat Shrink; (17.78-mm Dia)(140-cm) | 0 |
| 13***09 | Tube-Heat Shrink; (32-mm Dia)(16-cm) | 0 |
358-6633 Rail Gp-Fuel
| 27***01 | Connection | 2 |
| 27***02 | Seal-O-Ring | 2 |
| 33***39 | Control Group-Unprogrammed | 1 |
245-6098 Tank & Mtg Gp-Fuel -Includes Step
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 24***98 | Tank & Mtg Group-Fuel; -Includes Step | 1 |
245-6105 Tank Gp-Fuel
| 24***05 | Tank Group-Fuel | 1 |
| 29***80 | Glow Plug; (12-Volt) | 4 |
| 29***72 | Bar | 1 |
245-6104 Tank Gp-Fuel
| 24***04 | Tank Group-Fuel | 1 |
| 30***91 | Control Group-Unprogrammed; (Transmission) | 1 |
| 35***31 | Software Group-Machine | 1 |
Hydraulic System
230-3489 Accumulator Gp-Pilot Oil -Uncharged
| 10***01 | Fitting; (Quick Disconnect, Female) | 1 |
| 10***06 | Fitting; (Quick Disconnect, Male) | 1 |
| 15***52 | Connector As | 2 |
226-0420 Accumulator Gp-Pilot Oil -Charged
| 21***59 | Wiring Group-Ride Control | 1 |
| 22***20 | Accumulator Group-Pilot Oil; -Charged | 1 |
| 25***22 | Lines Group-Ride Control | 1 |
162-3960 Accumulator Gp-Ride Control -Charged
| 14***56 | Ring-Wear | 1 |
| 16***60 | Accumulator Group-Ride Control; -Charged | 1 |
| 16***84 | Seal-Lip Type | 1 |
162-3961 Accumulator Gp-Ride Control -Uncharged
| 16***61 | Accumulator Group-Ride Control; -Uncharged | 1 |
| 16***35 | Seal As-Buffer | 1 |
| 16***99 | Seal-U-Cup | 1 |
254-0160 Control Ar-Backhoe -Mechanical, 8-Bank, Ford
| 16***43 | Seal As-Buffer | 1 |
| 16***43 | Seal-U-Cup | 1 |
| 18***48 | Ring-Wear | 1 |
254-0153 Control Ar-Backhoe -Pilot, 7-Bank
| 14***16 | Ring-Wear | 1 |
| 14***18 | Ring-Wear | 1 |
| 16***42 | Seal As-Buffer | 1 |
254-0157 Control Ar-Backhoe -Mechanical, 8-Bank, Dynahoe
| 14***42 | Ring-Wear | 1 |
| 14***43 | Seal-Piston | 1 |
| 14***44 | Ring-Wear | 1 |
254-0159 Control Ar-Backhoe -Mechanical, 7-Bank, Ford
| 14***42 | Ring-Wear | 1 |
| 14***44 | Ring-Wear | 1 |
| 16***04 | Seal As-Buffer | 1 |
254-0156 Control Ar-Backhoe -Mechanical, 7-Bank, Dynahoe
| 23***57 | Kit-Seal; (Bucket Cylinder) | 1 |
| 25***56 | Control Ar-Backhoe; -Mechanical, 7-Bank, Dynahoe | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 2 |
254-0154 Control Ar-Backhoe -Pilot, 8-Bank
| 11***37 | Head | 1 |
| 12***96 | Cylinder As | 1 |
| 12***39 | Piston | 1 |
254-0125 Control Ar-Ride
| 10***82 | Washer; (11x19.5x2.5-mm Thk) | 1 |
| 23***83 | Piston | 1 |
| 23***85 | Seal As | 1 |
278-4505 Cylinder & Lines Gp-Thumb
| 27***68 | Cylinder As | 1 |
| 27***69 | Rod As | 1 |
| 27***70 | Piston | 1 |
270-7287 Cylinder Gp-Backhoe Bucket
| 10***46 | Rod As | 1 |
| 10***22 | Cylinder As | 1 |
| 16***95 | Seal As-Buffer | 1 |
270-7285 Cylinder Gp-Boom
| 11***18 | Plate | 1 |
| 11***34 | Adapter | 1 |
| 12***96 | Shaft Group-Pump Drive | 1 |
270-7288 Cylinder Gp-Extendable Stick
| 27***88 | Cylinder Group-Extendable Stick | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 3 |
| 8T***86 | Bolt-Plt; (M10 X 1.5 X 40) | 3 |
125-7895 Cylinder Gp-Lift
| 12***95 | Cylinder Group-Lift | 1 |
| 14***06 | Plug As | 1 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 1 |
226-5540 Cylinder Gp-Multipurpose Bukt
| 10***01 | Fitting; (Quick Disconnect, Female) | 1 |
| 10***06 | Fitting; (Quick Disconnect, Male) | 1 |
| 22***40 | Cylinder Group-Multipurpose Bukt | 1 |
270-7290 Cylinder Gp-Stabilizer -Lh
| 21***32 | Lines Group-Drain | 1 |
| 25***25 | Control Ar-Ride | 1 |
| 25***51 | Lines Group-Swing | 1 |
270-7291 Cylinder Gp-Stabilizer -Rh
| 10***01 | Rod As | 1 |
| 12***66 | Switch As-Roller | 1 |
| 13***74 | Link As | 1 |
270-7286 Cylinder Gp-Stick
| 10***01 | Rod As | 1 |
| 12***66 | Switch As-Roller | 1 |
| 13***91 | Lever As | 1 |
297-4896 Cylinder Gp-Swing
| 10***01 | Fitting; (Quick Disconnect, Female) | 1 |
| 10***06 | Fitting; (Quick Disconnect, Male) | 1 |
| 10***08 | Bracket; (Lh) | 2 |
286-8903 Cylinder Gp-Swing
| 10***01 | Fitting; (Quick Disconnect, Female) | 1 |
| 10***06 | Fitting; (Quick Disconnect, Male) | 1 |
| 10***08 | Bracket; (Lh) | 2 |
275-4243 Cylinder Gp-Thumb
| 10***01 | Fitting; (Quick Disconnect, Female) | 1 |
| 10***06 | Fitting; (Quick Disconnect, Male) | 1 |
| 10***08 | Bracket; (Lh) | 2 |
100-7844 Cylinder Gp-Tilt
| 10***44 | Cylinder Group-Tilt | 1 |
| 10***01 | Fitting; (Quick Disconnect, Female) | 1 |
| 10***06 | Fitting; (Quick Disconnect, Male) | 1 |
112-1826 Drive & Mtg Gp-Pump
| 10***01 | Fitting; (Quick Disconnect, Female) | 1 |
| 10***06 | Fitting; (Quick Disconnect, Male) | 1 |
| 10***08 | Bracket; (Lh) | 2 |
245-8769 Fastener Gp-Valve -Bank
| 10***01 | Fitting; (Quick Disconnect, Female) | 1 |
| 10***06 | Fitting; (Quick Disconnect, Male) | 1 |
| 10***08 | Bracket; (Lh) | 2 |
307-9799 Filter Gp-Oil
| 14***27 | Connector Group | 3 |
| 27***00 | Tube As | 1 |
| 27***02 | Hose As | 1 |
132-8769 Fitting Gp-Hydraulic -Quick Disconnect
| 13***69 | Fitting Group-Hydraulic; -Quick Disconnect | 1 |
| 14***27 | Connector Group | 2 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
254-0170 Hydraulic Ar
| 14***27 | Connector Group | 2 |
| 14***41 | Connector Group | 2 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
346-0059 Kickout & Positioner Gp
| 12***04 | Clamp | 10 |
| 14***37 | Hose As | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
254-0139 Kickout & Positioner Gp
| 14***27 | Connector Group | 2 |
| 14***41 | Connector Group | 2 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
345-3170 Lines Gp-Auxiliary Hydraulic
| 16***73 | Valve Group-Shutoff | 1 |
| 34***70 | Lines Group-Auxiliary Hydraulic | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
345-3171 Lines Gp-Auxiliary Hydraulic
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
| 20***23 | Saddle | 1 |
| 29***51 | Plate As | 1 |
274-3717 Lines Gp-Backhoe Auxiliary
| 10***87 | Tee As | 1 |
| 14***51 | Elbow Group | 1 |
| 15***27 | Elbow As | 2 |
274-3715 Lines Gp-Backhoe Auxiliary
| 13***84 | Clip | 1 |
| 14***70 | Elbow, 90°,-8 Orb Swiv. /-8 Orfs | 1 |
| 15***03 | Clamp-Hose | 6 |
274-3716 Lines Gp-Backhoe Auxiliary
| 14***15 | Connector As | 2 |
| 14***90 | Elbow Group | 2 |
| 14***46 | Tee As-Swivel | 1 |
254-0174 Lines Gp-Boom
| 12***13 | Tee-O-Ring | 1 |
| 13***13 | Band; (Marker) (Gray, P) | 6 |
| 14***58 | Connector | 1 |
272-1746 Lines Gp-Bucket
| 14***67 | Clamp; (Hose) | 1 |
| 14***35 | Connect Group; (Each Includes) | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 3 |
254-0179 Lines Gp-Bucket
| 12***13 | Tee-O-Ring | 1 |
| 12***50 | Valve-Check; (Quick Coupler Solenoid) | 1 |
| 13***13 | Band; (Marker) (Gray, P) | 2 |
254-0172 Lines Gp-Bucket
| 14***72 | Sleeve-Abrasion; (.19-M Each) | 0 |
| 19***60 | Marker; (Beige, L1) | 2 |
| 19***61 | Band-Marker; (Black, L2) | 2 |
216-5332 Lines Gp-Drain
| 10***47 | Hose As | 1 |
| 11***64 | Hose Assem. | 1 |
| 13***97 | Hose Assem. | 1 |
254-0161 Lines Gp-Extendable Stick
| 09***66 | Bolt; (M8x1.25x75-mm) | 2 |
| 10***33 | Clip; (Slot) | 2 |
| 10***34 | Clip; (Tab) | 2 |
254-0148 Lines Gp-Hydraulic Oil Cooler
| 14***28 | Connector Assem. | 4 |
| 14***72 | Elbow Group | 2 |
| 16***94 | Hose As | 2 |
254-0138 Lines Gp-Lift Cylinder
| 14***28 | Connector Assem. | 4 |
| 14***72 | Elbow Group | 2 |
| 16***94 | Hose As | 2 |
254-0166 Lines Gp-Multipurpose Bucket
| 14***27 | Connector Group | 2 |
| 15***37 | Elbow Group | 1 |
| 25***66 | Lines Group-Multipurpose Bucket | 1 |
289-3280 Lines Gp-Pilot -Stabilizer
| 18***54 | Valve Group-Solenoid; -Auxiliary | 2 |
| 28***80 | Lines Group-Pilot; -Stabilizer | 1 |
289-3278 Lines Gp-Pilot
| 14***22 | Adapter; (-10orb/-12orfs) | 1 |
| 14***88 | Elbow Group | 1 |
| 14***92 | Elbow; (-12 Orfs/-12 Orfs Swivel) | 2 |
345-3166 Lines Gp-Pilot -Loader
| 20***71 | Kit-Seal; (Solenoid Valve) | 1 |
| 20***10 | Valve Group-Solenoid; (Inlet) | 1 |
| 21***61 | Flange | 1 |
289-3276 Lines Gp-Pilot
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 4 |
| 14***51 | Elbow Group | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 2 |
345-3168 Lines Gp-Pilot -Signal
| 09***42 | Bolt-Socket Head; (M5x0.8thdx50mm) | 4 |
| 10***08 | Kit-Seal; (Solenoid Valve, Quick Steer) | 1 |
| 23***26 | Coil As | 1 |
345-3167 Lines Gp-Pump
| 22***84 | Valve Group-Relief; (Load Sensing Signal) | 1 |
| 22***92 | Kit-Valve; (Shuttle) | 1 |
| 22***99 | Kit-Seal; (Control Manifold) | 1 |
289-3274 Lines Gp-Pump
| 20***71 | Kit-Seal; (Solenoid Valve) | 1 |
| 20***10 | Valve Group-Solenoid; (Inlet) | 1 |
| 21***61 | Flange | 1 |
254-0122 Lines Gp-Ride Control
| 22***92 | Kit-Valve; (Shuttle) | 1 |
| 22***99 | Kit-Seal; (Control Manifold) | 1 |
| 25***22 | Lines Group-Ride Control | 1 |
254-0164 Lines Gp-Stabilizer
| 09***32 | Seal-O-Ring (Id=28.24mm) | 1 |
| 22***84 | Valve Group-Relief; (Load Sensing Signal) | 1 |
| 22***85 | Valve Group-Flow Control; (Auxiliary, Inlet) | 1 |
254-0165 Lines Gp-Stabilizer
| 09***32 | Seal-O-Ring (Id=28.24mm) | 1 |
| 22***85 | Valve Group-Flow Control; (Auxiliary, Inlet) | 1 |
| 22***97 | Filter-Oil; (Flow Regulator) | 1 |
254-0173 Lines Gp-Stick
254-0151 Lines Gp-Swing
| 19***15 | Seal-O-Ring | 1 |
| 25***51 | Lines Group-Swing | 1 |
| 34***59 | Kit-Spool | 1 |
254-0137 Lines Gp-Tilt Cylinder
| 19***15 | Seal-O-Ring | 1 |
| 25***37 | Lines Group-Tilt Cylinder | 1 |
| 34***90 | Valve Group-Relief; (Direct Operated) | 1 |
341-4726 Manifold & Solenoid Gp-Control -Inlet
| 22***96 | Pin | 1 |
| 27***10 | Pin | 1 |
| 27***82 | Pin | 1 |
269-1060 Manifold & Solenoid Gp-Control -Inlet
| 26***60 | Manifold & Solenoid Group-Control; -Inlet | 1 |
| 27***61 | Bracket As | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 3 |
299-9072 Manifold & Solenoid Gp-Control -Boom, Stick, Pattern Switch
| 29***72 | Manifold & Solenoid Group-Control; -Boom, Stick, Pattern Switch | 1 |
| 34***47 | Bracket As | 1 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 3 |
179-3543 Manifold & Solenoid Gp-Control
| 14***88 | Kit-Seal; (Ride Control, Switch) | 1 |
| 17***43 | Manifold & Solenoid Group-Control | 1 |
| 22***09 | Kit-Seal; (Accumulator) | 1 |
348-4578 Manifold Gp-Control -Inlet
| 12***71 | Clamp-Hose | 1 |
| 13***56 | Seal-O-Ring | 1 |
| 1P***78 | Clamp; (Hose) | 3 |
271-0539 Manifold Gp-Control -Outlet
| 03***53 | Seal-O-Ring; (08.92mm Id) | 2 |
| 03***28 | Seal-O-Ring | 1 |
| 03***43 | Seal-O-Ring | 2 |
348-4573 Manifold Gp-Control -Inlet
| 13***50 | Ring-Retaining | 1 |
| 34***73 | Manifold Group-Control; -Inlet | 1 |
271-0520 Manifold Gp-Control -Inlet
| 27***20 | Manifold Group-Control; -Inlet | 1 |
| 29***03 | Block | 2 |
| 29***04 | Block | 2 |
343-7137 Manifold Gp-Control -Inlet
| 12***24 | Plate-Valve | 1 |
| 16***79 | Pin | 3 |
| 19***26 | Barrel | 1 |
245-8780 Manifold Gp-Ride Control
| 14***25 | Connector As. | 16 |
| 16***48 | Sleeve-Abrasion | 0 |
| 24***80 | Manifold Group-Ride Control | 1 |
254-0185 Mounting Gp-Bank Valve
| 20***45 | Control Group-Hydraulic Hand; -Loader | 1 |
| 24***69 | Fastener Group-Valve; -Bank | 1 |
| 25***25 | Film-Instruction; (Bucket Control) | 1 |
345-3165 Mounting Gp-Bank Valve
| 20***45 | Control Group-Hydraulic Hand; -Loader | 1 |
| 24***69 | Fastener Group-Valve; -Bank | 1 |
| 25***25 | Film-Instruction; (Bucket Control) | 1 |
279-4180 Mounting Gp-Cylinder
| 20***64 | Control Group-Hydraulic Hand; -Loader | 1 |
| 24***69 | Fastener Group-Valve; -Bank | 1 |
| 25***26 | Film-Instruction; (Bucket Control) | 1 |
280-1465 Mounting Gp-Lines
| 20***64 | Control Group-Hydraulic Hand; -Loader | 1 |
| 24***69 | Fastener Group-Valve; -Bank | 1 |
| 25***26 | Film-Instruction; (Bucket Control) | 1 |
254-0163 Mounting Gp-Pump
| 22***02 | Kit-Fastener | 1 |
| 25***63 | Mounting Group-Pump | 1 |
| 26***79 | Cover Group; (Outlet) | 1 |
280-7873 Pump Gp-Gear -Secondary
| 22***02 | Kit-Fastener | 1 |
| 26***79 | Cover Group; (Outlet) | 1 |
| 27***21 | Valve Group-Control; -Lift | 1 |
269-9336 Pump Gp-Piston -Primary
| 13***71 | Seal-O-Ring | 4 |
| 19***06 | Seal-O-Ring | 10 |
| 19***08 | Seal-O-Ring | 4 |
6e-4006 Rotating Gp-Pump
| 25***53 | Kit-Fastener | 1 |
| 26***79 | Cover Group; (Outlet) | 1 |
| 27***20 | Manifold Group-Control; -Inlet | 1 |
128-5596 Shaft Gp-Pump Drive
| 12***96 | Shaft Group-Pump Drive | 1 |
| 13***71 | Seal-O-Ring | 6 |
| 19***06 | Seal-O-Ring | 13 |
254-0169 Tank & Mtg Gp-Hydraulic
| 25***69 | Tank & Mtg Group-Hydraulic | 1 |
| 25***47 | Kit-Fastener | 1 |
| 26***60 | Manifold & Solenoid Group-Control; -Inlet | 1 |
278-7758 Valve & Lines Gp-Pilot -Backhoe, Joystick
| 25***47 | Kit-Fastener | 1 |
| 27***39 | Manifold Group-Control; -Outlet | 1 |
| 27***41 | Valve Group-Control; -Stabilizer | 2 |
254-0188 Valve Ar-Bank 2
| 13***71 | Seal-O-Ring | 16 |
| 19***06 | Seal-O-Ring | 36 |
| 19***08 | Seal-O-Ring | 20 |
346-1232 Valve Ar-Bank 2
| 25***48 | Kit-Fastener | 1 |
| 26***60 | Manifold & Solenoid Group-Control; -Inlet | 1 |
| 27***39 | Manifold Group-Control; -Outlet | 1 |
346-1233 Valve Ar-Bank 3
| 13***71 | Seal-O-Ring | 18 |
| 19***06 | Seal-O-Ring | 41 |
| 19***08 | Seal-O-Ring | 22 |
254-0189 Valve Ar-Bank 3
| 25***89 | Valve Ar-Bank 3 | 1 |
| 25***48 | Kit-Fastener | 1 |
| 27***39 | Manifold Group-Control; -Outlet | 1 |
342-6662 Valve Gp-Bank 2 -Bucket Control
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
| 16***16 | Ring-Backup | 1 |
| 22***86 | Valve As-Check | 2 |
271-0512 Valve Gp-Bank 2 -Bucket Control
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
| 16***16 | Ring-Backup | 1 |
| 22***86 | Valve As-Check | 2 |
271-0513 Valve Gp-Bank 3 -Bucket Control
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
| 12***50 | Seal-O-Ring | 1 |
| 16***16 | Ring-Backup | 1 |
342-6663 Valve Gp-Bank 3 -Bucket Control
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
| 12***50 | Seal-O-Ring | 1 |
| 16***16 | Ring-Backup | 1 |
271-0527 Valve Gp-Bank 7 -Pilot
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
| 16***16 | Ring-Backup | 1 |
| 22***86 | Valve As-Check | 2 |
342-6667 Valve Gp-Bank 7 -Mechanical
| 09***42 | Bolt-Socket Head; (M5x0.8thdx50mm) | 4 |
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
| 12***50 | Seal-O-Ring | 1 |
342-6668 Valve Gp-Bank 8 -Mechanical
| 19***10 | Seal-O-Ring | 2 |
| 19***63 | Plug | 2 |
| 19***64 | Plug | 2 |
271-0528 Valve Gp-Bank 8 -Pilot
| 09***42 | Bolt-Socket Head; (M5x0.8thdx50mm) | 4 |
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
| 16***16 | Ring-Backup | 1 |
271-0543 Valve Gp-Control -Stick
| 19***10 | Seal-O-Ring | 2 |
| 19***63 | Plug | 3 |
| 19***64 | Plug | 2 |
348-4583 Valve Gp-Control -Extendable Stick
| 17***25 | Washer; (67.5x120x2-mm Thk) | 3 |
| 17***26 | Washer; (67.5x120x3-mm Thk) | 2 |
| 34***83 | Valve Group-Control; -Extendable Stick | 1 |
271-0546 Valve Gp-Control -Extendable Stick
| 19***10 | Seal-O-Ring | 2 |
| 19***63 | Plug | 2 |
| 19***64 | Plug | 2 |
348-4584 Valve Gp-Control -Stabilizer
| 09***31 | Ring-Retaining | 2 |
| 27***18 | Boom As | 1 |
| 27***19 | Pin | 1 |
341-8185 Valve Gp-Control -Stick
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***85 | Ring; (Back Up) | 2 |
| 29***18 | Valve Group-Cushion Crossover Rlf | 2 |
348-4577 Valve Gp-Control -Auxiliary
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
| 34***77 | Valve Group-Control; -Auxiliary | 1 |
| 5P***99 | Ring-To Clutch Piston Pins | 1 |
348-4574 Valve Gp-Control -Lift
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
| 16***16 | Ring-Backup | 1 |
| 34***74 | Valve Group-Control; -Lift | 1 |
348-4579 Valve Gp-Control -Boom
| 03***44 | Seal-O-Ring | 1 |
| 10***20 | Carrier-Pin | 1 |
| 10***40 | Cap | 1 |
348-4575 Valve Gp-Control -Tilt
| 11***81 | Plate | 2 |
| 15***66 | Kit-Spring; (Pilot Valve) | 2 |
| 17***41 | Nut; (M8x6.5-mm) | 2 |
271-0522 Valve Gp-Control -Tilt
| 19***10 | Seal-O-Ring | 2 |
| 19***63 | Plug | 2 |
| 19***64 | Plug | 2 |
348-4576 Valve Gp-Control -Tilt
| 30***86 | Valve Group-Pressure Reducing | 1 |
| 34***76 | Valve Group-Control; -Tilt | 1 |
271-0523 Valve Gp-Control -Auxiliary
| 19***63 | Plug | 2 |
| 26***05 | Valve Group-Relief; (Auxiliary, Bucket Cyl Head End) | 2 |
| 27***23 | Valve Group-Control; -Auxiliary | 1 |
348-4580 Valve Gp-Control -Swing
| 25***16 | Block As-Test Manifold | 1 |
| 25***07 | Kit-Seal; (Relief Valve) | 1 |
| 26***23 | Valve Group-Relief; (Main) | 1 |
271-0547 Valve Gp-Control -Auxiliary
| 19***63 | Plug | 2 |
| 26***02 | Valve Group-Relief; (Bucket Cylinder Head End) | 2 |
| 27***47 | Valve Group-Control; -Auxiliary | 1 |
348-4582 Valve Gp-Control -Stick
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
| 21***73 | Nut; (1/2-28-Thd) | 1 |
| 22***29 | Coil As-Solenoid; (12-Volt)(Modulating Valve) | 1 |
271-0542 Valve Gp-Control -Boom
| 19***10 | Seal-O-Ring | 2 |
| 19***63 | Plug | 2 |
| 19***64 | Plug | 2 |
271-0521 Valve Gp-Control -Lift
| 19***10 | Seal-O-Ring | 2 |
| 19***63 | Plug | 2 |
| 19***64 | Plug | 2 |
271-0545 Valve Gp-Control -Bucket
| 19***10 | Seal-O-Ring | 2 |
| 19***63 | Plug | 2 |
| 19***64 | Plug | 2 |
348-9819 Valve Gp-Control -Auxiliary
| 32***20 | Brace As | 1 |
| 34***19 | Valve Group-Control; -Auxiliary | 1 |
| 5P***70 | Pin (Lock) | 1 |
271-0544 Valve Gp-Control -Swing
| 19***10 | Seal-O-Ring | 2 |
| 19***63 | Plug | 3 |
| 19***64 | Plug | 2 |
271-0541 Valve Gp-Control -Stabilizer
| 19***10 | Seal-O-Ring | 2 |
| 19***63 | Plug | 2 |
| 19***64 | Plug | 2 |
348-4581 Valve Gp-Control -Bucket
| 34***91 | Valve Group-Relief | 1 |
| 34***01 | Valve Group-Relief | 1 |
| 34***81 | Valve Group-Control; -Bucket | 1 |
283-6331 Valve Gp-Cushion Crossover Rlf
| 14***20 | Connector As | 3 |
| 14***89 | Elbow As | 3 |
| 28***31 | Valve Group-Cushion Crossover Rlf | 1 |
257-7732 Valve Gp-Makeup -Bulldozer Lift
| 09***28 | Ring-Retaining; (External) | 4 |
| 25***32 | Valve Group-Makeup; -Implement Pilot Pressure | 1 |
| 27***69 | Pin | 2 |
223-4715 Valve Gp-Pilot -Truck Body
| 22***15 | Valve Group-Pilot; -Truck Body | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 6 |
| 6F***61 | Dowel | 1 |
301-0086 Valve Gp-Pressure Reducing
| 09***11 | Tube | 1 |
| 13***76 | Bracket As | 1 |
| 13***11 | Screw; (M6x1x35-mm)(M6x1.0x20mm) | 1 |
300-0430 Valve Gp-Pressure Reducing -Service Brake
| 16***95 | Knob | 1 |
| 16***98 | Knob | 2 |
| 18***84 | Bearing | 1 |
296-6723 Valve Gp-Pump Control -Power Compensator
| 29***23 | Valve Group-Pump Control; -Power Compensator | 1 |
| 32***16 | Plate | 2 |
345-7712 Valve Gp-Relief -Main
| 13***47 | Pin | 2 |
| 18***53 | Pad | 2 |
| 19***87 | Bumper As | 2 |
260-3022 Valve Gp-Relief -Main
| 09***28 | Ring-Retaining; (External) | 2 |
| 09***30 | Ring-Retaining; (External) | 2 |
| 25***11 | Plate | 4 |
185-4254 Valve Gp-Solenoid
| 13***29 | Pad As-Stabilizer | 1 |
| 14***89 | Latch | 2 |
| 14***90 | Latch | 2 |
Implements
9r-1335 Arm Gp-Lift
| 18***24 | Grease-Water & Temp Resistant | 1 |
| 27***21 | Pin | 2 |
| 27***22 | Pin | 2 |
270-7818 Boom As
| 10***11 | Block | 2 |
| 27***18 | Boom As | 1 |
| 27***13 | Bearing-Sleeve | 4 |
269-8217 Boom Gp
| 1L***68 | Ring-Retaining | 2 |
| 20***35 | Block | 2 |
| 21***43 | Pin | 1 |
9r-1336 Brace Gp-Lift Cylinder
| 09***28 | Ring-Retaining; (External) | 2 |
| 09***30 | Ring-Retaining; (External) | 2 |
| 25***11 | Plate | 4 |
285-1200 Lines Gp-Grease -Boom, Stick Cylinder Bearing
| 27***02 | Bucket Ar-Multipurpose | 1 |
| 28***00 | Lines Group-Grease; -Boom, Stick Cylinder Bearing | 1 |
| 9R***20 | Edge Group-Cutting | 1 |
269-8218 Linkage Gp-Backhoe Bucket
| 26***18 | Linkage Group-Backhoe Bucket | 1 |
| 27***03 | Bucket Group-Multipurpose | 1 |
| 9R***20 | Edge Group-Cutting | 1 |
9r-1337 Linkage Gp-Loader Bucket
| 10***10 | Fork Group; Fork Gp | 1 |
| 27***03 | Bucket Group-Multipurpose | 1 |
| 9R***37 | Linkage Group-Loader Bucket | 1 |
326-7717 Lock Gp-Transport
| 17***80 | Plate | 7 |
| 19***24 | Adapter; (2-Strap) | 4 |
| 27***83 | Bracket As; (Rh) | 1 |
206-1641 Lock Gp-Transport -Stabilizer
| 10***85 | Bracket As-Tilt; (Rh) | 1 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
254-0109 Lock Gp-Transport
| 19***16 | Plate | 7 |
| 19***24 | Adapter; (2-Strap) | 6 |
| 25***09 | Lock Group-Transport | 1 |
269-8219 Mounting Gp-Stick
| 17***65 | Plate | 7 |
| 19***24 | Adapter; (2-Strap) | 4 |
| 26***19 | Mounting Group-Stick | 1 |
254-0135 Pad & Guard Gp-Stabilizer
| 17***79 | Plate | 7 |
| 19***24 | Adapter; (2-Strap) | 3 |
| 25***35 | Pad & Guard Group-Stabilizer | 1 |
322-7706 Pad Gp-Stabilizer -Street
| 27***65 | Bucket As-General Purpose | 1 |
| 32***06 | Pad Group-Stabilizer; -Street | 1 |
| 9R***48 | Edge Group-Cutting | 1 |
270-3220 Stabilizer Gp-Backhoe
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***20 | Stabilizer Group-Backhoe | 1 |
270-7866 Stick As
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***66 | Stick As | 1 |
269-8215 Stick Gp-Extendable
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 26***15 | Stick Group-Extendable | 1 |
269-8220 Stick Gp-Hoe
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 26***20 | Stick Group-Hoe | 1 |
Lubrication System
306-7692 Breather Gp
| 03***63 | Plug | 1 |
| 21***33 | Valve As-Fluid Sampling | 1 |
| 30***92 | Breather Group | 1 |
303-5773 Filler Gp-Engine Oil
| 12***99 | Bolt; (M10x1.5x40-mm) | 2 |
| 27***74 | Regulator As-Water Temperature; (Connector Included) | 1 |
| 28***44 | Gasket-Water Regulator; (Temperature) | 1 |
254-0118 Gauge Gp-Oil Level & Filler
| 11***59 | Mounting As | 2 |
| 12***65 | Rivet-Pop | 18 |
| 14***35 | Clip | 2 |
298-5112 Pump Gp-Engine Oil
| 25***47 | Lines Group-Transmission Cooler | 1 |
| 25***48 | Lines Group-Hydraulic Oil Cooler | 1 |
| 25***49 | Lines Group-Air | 1 |
304-5617 Valve Gp-Fluid Sampling -Engine Oil
| 12***65 | Rivet-Pop | 24 |
| 21***74 | Cap-Pressure; (16-Psi)(Radiator) | 1 |
| 26***85 | Washer; (9x25x1.6-mm Thk) | 2 |
Machine Arrangement
254-0180 Backhoe Ar-Extendable Stick
| 25***73 | Lines Group-Stick | 1 |
| 25***74 | Lines Group-Boom | 1 |
| 25***79 | Lines Group-Bucket | 1 |
254-0175 Backhoe Ar-Standard Stick
| 25***72 | Lines Group-Bucket | 1 |
| 25***73 | Lines Group-Stick | 1 |
| 25***74 | Lines Group-Boom | 1 |
254-0110 Chassis Ar
| 20***41 | Lock Group-Transport; -Stabilizer | 1 |
| 21***09 | Lock Group-Vandalism | 1 |
| 24***98 | Tank & Mtg Group-Fuel; -Includes Step | 1 |
254-0100 Common Ar
| 25***00 | Common Ar | 1 |
| 25***10 | Chassis Ar | 1 |
| 25***20 | Engine Ar | 1 |
254-0140 Loader Ar
| 10***44 | Cylinder Group-Tilt | 1 |
| 12***95 | Cylinder Group-Lift | 2 |
| 25***37 | Lines Group-Tilt Cylinder | 1 |
Operator Station
206-1801 Air Conditioner & Mounting Gp
| 11***72 | Boot | 4 |
| 13***39 | Spacer; (20x40x3-mm Thk) | 4 |
| 13***40 | Shim; (1-mm Thk) | 9 |
254-0200 Cab Ar-Enclosed Rops -With Air Conditioner
| 11***72 | Boot | 4 |
| 13***39 | Spacer; (20x40x3-mm Thk) | 13 |
| 13***40 | Shim; (1-mm Thk) | 11 |
271-9124 Cab Gp-Enclosed Rops
| 13***16 | Film-Instruction; (Extendable Stick) | 1 |
| 16***47 | Shaft As | 1 |
| 17***35 | Lock Pin | 1 |
254-0198 Canopy Ar-Open Rops -Without Front Window
| 16***47 | Shaft As | 1 |
| 17***35 | Lock Pin | 1 |
| 19***98 | Film-Instruction; (Auxiliary)(Standard Stick) | 1 |
271-9125 Canopy Gp-Open Rops -Without Front Window
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
| 25***37 | Boot | 1 |
254-0177 Compressor & Mtg Gp-Refrig
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
| 25***77 | Compressor & Mtg Group-Refrig | 1 |
301-9725 Condenser & Mtg Gp-Refrigerant
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***91 | Steering Wheel As | 1 |
| 15***68 | Plug | 1 |
206-1703 Console Gp-Operator -Front
| 13***87 | Screw; (M4x0.7x12-mm) | 2 |
| 13***49 | Spacer; (7.4x12.7x24-mm Thk)(12.7mm Dia) | 2 |
| 15***69 | Spring Group-Gas; (Cab Door) | 1 |
206-1702 Console Gp-Operator -Lh
| 13***87 | Screw; (M4x0.7x12-mm) | 2 |
| 13***49 | Spacer; (7.4x12.7x24-mm Thk)(12.7mm Dia) | 2 |
| 15***69 | Spring Group-Gas; (Cab Door) | 1 |
206-1700 Console Gp-Operator -Rh
| 20***00 | Console Group-Operator; -Rh | 1 |
| 27***70 | Plate | 1 |
| 9X***42 | Screw-Truss Head (M6x1.0x12mm); (M6x1.00x12mm) | 2 |
271-3097 Control Gp-Handle -Lh
| 13***87 | Screw; (M4x0.7x12-mm) | 2 |
| 13***49 | Spacer; (7.4x12.7x24-mm Thk)(12.7mm Dia) | 2 |
| 15***69 | Spring Group-Gas; (Cab Door) | 1 |
254-0192 Control Gp-Hydraulic Hand
| 11***31 | Switch-Temperature; (Air Conditioner) | 1 |
| 12***16 | Connector | 1 |
| 12***78 | Locknut; (M6x1-Thd) | 4 |
206-1645 Control Gp-Hydraulic Hand -Loader
| 13***87 | Screw; (M4x0.7x12-mm) | 2 |
| 13***49 | Spacer; (7.4x12.7x24-mm Thk)(12.7mm Dia) | 2 |
| 15***69 | Spring Group-Gas; (Cab Door) | 1 |
209-3364 Control Gp-Hydraulic Hand -Loader
| 1H***44 | Lockwasher (Bracket To Cab) | 4 |
| 20***64 | Control Group-Hydraulic Hand; -Loader | 1 |
| 24***79 | Plate | 2 |
254-0194 Control Gp-Hydraulic Hand
| 12***56 | Bushing | 4 |
| 12***57 | Bushing | 8 |
| 13***87 | Screw; (M4x0.7x12-mm) | 8 |
274-4495 Control Gp-Hydraulic Pedal
| 16***84 | Screw-Truss Head; (M5x0.8x20-mm) | 1 |
| 16***87 | Washer-Hard; (5.2x16x1.5-mm Thk) | 1 |
| 16***94 | Spring-Flat Wire | 1 |
274-4496 Control Gp-Hydraulic Pedal
| 16***84 | Screw-Truss Head; (M5x0.8x20-mm) | 1 |
| 16***87 | Washer-Hard; (5.2x16x1.5-mm Thk) | 1 |
| 16***94 | Spring-Flat Wire | 1 |
271-3099 Control Gp-Joystick -Lh
| 09***49 | Bolt; (M8x1.25x40-mm) | 1 |
| 11***02 | Knob | 1 |
| 15***83 | Washer-Hard; (8.4x35x2.5-mm Thk) | 3 |
271-3096 Control Gp-Joystick -Rh
| 09***49 | Bolt; (M8x1.25x40-mm) | 1 |
| 11***02 | Knob | 1 |
| 15***83 | Washer-Hard; (8.4x35x2.5-mm Thk) | 3 |
218-4453 Control Gp-Steering -Tilt
| 08***77 | Lamp Group-Dome; (12-Volt) | 1 |
| 11***20 | Bolt-Socket Head; (M4x0.7x35-mm) | 8 |
| 12***70 | Screw-Machine; (M6x1x40-mm) | 5 |
276-8515 Cover Gp-Cab
| 10***11 | Support | 1 |
| 10***33 | Clip; (Slot) | 1 |
| 10***34 | Clip; (Tab) | 1 |
206-1592 Door Gp-Cab -Lh
| 10***33 | Clip; (Slot) | 1 |
| 10***34 | Clip; (Tab) | 1 |
| 13***84 | Clip | 2 |
206-1593 Door Gp-Cab -Rh
| 12***20 | Mirror As | 2 |
| 15***05 | Bracket & Mounting As; (Lh) | 1 |
| 15***06 | Bracket & Mounting As; (Rh) | 1 |
206-1618 Floor Mat Gp
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 15***91 | Motor Group-Window Wiper; (Front) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 5 |
210-8363 Heater & Air Conditioner Gp
| 03***57 | Washer; (13x26x6-mm Thk) | 2 |
| 16***68 | Fastener-Panel | 15 |
| 18***34 | Bearing-Self-Aligning | 2 |
281-7219 Kit-Cab Window -Rear
| 03***57 | Washer; (13x26x6-mm Thk) | 2 |
| 16***68 | Fastener-Panel | 15 |
| 18***34 | Bearing-Self-Aligning | 2 |
299-6985 Latch Gp-Cab Door & Window -Upper-Rh-Lower
| 11***90 | Mount As | 2 |
| 1L***77 | Button-- Fuel Tank Hole In Hood | 2 |
| 29***49 | Washer-Hard; (17x75x10-mm Thk) | 2 |
299-6986 Latch Gp-Cab Door & Window -Lh-Upper-Lower
| 09***72 | Screw-Machine; (M4x0.7x16-mm) | 4 |
| 24***62 | Kit-Repair; (Governor Pedal) | 1 |
| 26***67 | Sensor Group-Position; -Brake Pedal | 1 |
269-3248 Latch Gp-Console
| 26***48 | Latch Group-Console | 1 |
| 33***66 | Software Group-Communication; (Product Link 121sr) | 1 |
344-2432 Latch Gp-Console
| 20***70 | Cover-Roof; (Center) | 1 |
| 20***71 | Cover-Roof; (Rear) | 1 |
| 20***76 | Cover-Roof; (Lh) | 1 |
209-4703 Liner Gp-Cab
| 20***49 | Seat Belt; (2-In) | 1 |
| 20***03 | Liner Group-Cab | 1 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 4 |
254-0190 Lines Gp-Heater & Air Cond
| 10***81 | Bolt-Socket Head; (M8x1.25x20-mm) | 2 |
| 12***80 | Locknut; (M12x1.75-Thd) | 2 |
| 16***83 | Washer; (19.8x31.8x1.6-mm Thk) | 3 |
205-9580 Mirror Gp-Rear View -Exterior
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
| 16***47 | Bracket As; (Rh) | 1 |
| 16***61 | Bracket As; (Lh) | 1 |
205-9578 Mirror Gp-Rear View -Interior
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
| 16***47 | Bracket As; (Rh) | 1 |
| 16***61 | Bracket As; (Lh) | 1 |
259-6276 Mirror Gp-Rear View -Interior
| 10***03 | Fastener | 3 |
| 10***81 | Bolt-Socket Head; (M8x1.25x20-mm) | 2 |
| 11***42 | Fastener | 3 |
186-2589 Motor Gp-Window Wiper -Front
| 18***89 | Motor Group-Window Wiper; -Front | 1 |
| 20***91 | Seat Group-Suspension; -Vinyl | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 1 |
269-3247 Mounting Gp-Backhoe Control -Pilot
| 09***82 | Nut Self-Locking; (M8x1.25 Thd) | 2 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 11***42 | Fastener | 34 |
205-9560 Mounting Gp-Cab
| 12***37 | Lamp; (12-Volt) | 1 |
| 13***24 | Seal | 1 |
| 20***60 | Mounting Group-Cab | 1 |
209-3377 Pedal Gp-Governor
| 14***62 | Spacer; (21.2x25.4x20-mm Thk) | 1 |
| 20***23 | Insert; (Lh) | 1 |
| 20***25 | Insert; (Rh) | 1 |
263-9088 Radio Gp-Communication -Product Link 121sr
| 26***88 | Radio Group-Communication; -Product Link 121sr | 1 |
| 5P***97 | Clip (9.52mm Id); (9.52mm Dia) | 2 |
| 8C***81 | Hose; (200-cm) | 0 |
205-9569 Roof Gp-Cab
| 09***34 | Terminal-Blade; (18-Ga To 22-Ga) | 2 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
206-1747 Seat Belt Gp -Retractable, 2-In
| 10***08 | Handle; (Rh) | 1 |
| 12***42 | Retainer; (Mount) | 6 |
| 12***45 | Washer; (13x40x3-mm Thk) | 8 |
206-1748 Seat Belt Gp -Retractable, 3-In
| 10***08 | Handle; (Rh) | 1 |
| 12***42 | Retainer; (Mount) | 6 |
| 12***45 | Washer; (13x40x3-mm Thk) | 8 |
273-5905 Seat Gp -Vinyl
| 11***02 | Knob | 2 |
| 11***49 | Cap | 2 |
| 12***80 | Locknut; (M12x1.75-Thd) | 4 |
206-1791 Seat Gp-Suspension -Vinyl
| 10***08 | Handle; (Rh) | 1 |
| 12***42 | Retainer; (Mount) | 5 |
| 12***45 | Washer; (13x40x3-mm Thk) | 6 |
273-6037 Seat Gp-Suspension -Deluxe, Cloth
| 10***45 | Blade As-Wiper; (600-mm) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
280-7364 Seat Gp-Suspension -Vinyl
| 28***64 | Seat Group-Suspension; -Vinyl | 1 |
| 29***31 | Film-Identification; (450e, Rh) | 1 |
| 29***32 | Film-Identification; (450e, Lh) | 1 |
280-7366 Seat Gp-Suspension -Cloth
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
| 28***66 | Seat Group-Suspension; -Deluxe, Cloth | 1 |
206-1796 Seat Gp-Suspension -Deluxe, Cloth
| 10***08 | Handle; (Rh) | 1 |
| 12***42 | Retainer; (Mount) | 5 |
| 12***45 | Washer; (13x40x3-mm Thk) | 6 |
273-6372 Suspension Gp-Seat
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 15***90 | Film-Identification; (Water Separator) | 1 |
| 15***33 | Film-Identification; (12-Volt) | 1 |
239-1080 Tachometer Gp-Electric
| 23***80 | Tachometer Group-Electric | 1 |
| 24***18 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
206-1704 Trim Gp-Cab -Open Rops
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 15***90 | Film-Identification; (Water Separator) | 1 |
| 15***33 | Film-Identification; (12-Volt) | 1 |
206-1857 Visor Gp-Cab
| 12***78 | Locknut; (M6x1-Thd) | 2 |
| 17***31 | Screw; (Truss Head) (M4x0.7x12mm) | 1 |
| 20***52 | Cover-Vandalism | 1 |
206-1727 Washer Gp-Window
| 03***32 | Strap--Harness Assembly To Compressor | 4 |
| 11***07 | Tube | 1 |
| 20***27 | Washer Group-Window | 1 |
229-0300 Window Gp-Cab -Rear
| 22***00 | Window Group-Cab; -Rear | 1 |
205-9628 Window Gp-Cab -Upper, Rh
| 20***28 | Window Group-Cab; -Upper, Rh | 1 |
205-9619 Window Gp-Cab -Upper, Lh
| 20***19 | Window Group-Cab; -Upper, Lh | 1 |
205-9595 Window Gp-Door -Rh
| 20***95 | Window Group-Door; -Rh | 1 |
205-9585 Window Gp-Door -Lh
| 20***85 | Window Group-Door; -Lh | 1 |
206-1725 Wiper Gp-Window
| 20***25 | Wiper Group-Window | 1 |
Power Train
6d-0337 Valve Gp-Tire
| 27***19 | Wheel & Tire Group; -Rh | 1 |
| 6D***37 | Valve Group-Tire | 1 |
201-1920 Valve Gp-Tire
| 17***08 | Cone-Tapered | 1 |
| 19***11 | Dowel | 1 |
| 19***69 | Plug; (Thrust) | 1 |
269-9259 Axle Gp-Drive & Steering -Front
| 11***06 | Plate-Converter Drive | 1 |
| 11***13 | Plate-Converter Reinforcement | 1 |
| 26***59 | Axle Group-Drive & Steering; -Front | 1 |
269-9260 Axle Gp-Rear
| 13***22 | Bushing | 1 |
| 14***68 | Elbow Group | 2 |
| 26***60 | Axle Group-Rear | 1 |
291-3820 Cooler Gp-Transmission Oil
| 20***59 | Retainer | 1 |
| 20***60 | Bushing | 1 |
| 20***61 | Gear-Ring | 1 |
209-9882 Differential & Bevel Gear Gp -Front
| 20***59 | Retainer | 1 |
| 20***60 | Bushing | 1 |
| 20***61 | Gear-Ring | 1 |
288-7200 Differential & Bevel Gear Gp
| 19***08 | Pin | 3 |
| 20***55 | Plug | 3 |
| 23***70 | Shaft; (Differential) | 1 |
288-7206 Differential Gp -Rear
| 24***27 | Support As; (Rh) | 1 |
| 27***08 | Support As; (Lh) | 1 |
| 28***06 | Differential Group; -Rear | 1 |
216-9498 Differential Gp -Front
| 16***96 | Washer-Thrust; (55.5x100.5x5-mm Thk)(5mm) | 2 |
| 1K***82 | Washer; (2.266x4x0.031-In Thk) | 1 |
| 21***98 | Differential Group; -Axle, Front | 1 |
111-7907 Drive Gp-Flexible Coupling
| 09***24 | Ring-Retaining | 4 |
| 11***07 | Drive Group-Flexible Coupling | 1 |
| 19***69 | Plug; (Thrust) | 1 |
254-0129 Filler Gp-Power Train Oil -Autoshift
| 11***26 | Drive & Mtg Group-Pump | 1 |
| 20***32 | Shaft Group-Drive; -Front | 1 |
| 20***10 | Switch Group-Differential Lock; -Center Pivot Machine | 1 |
288-7242 Housing & Flange Gp-Axle -Lh
| 10***26 | Bolt; (M24x19.1-mm) | 8 |
| 11***87 | Kit-Spider & Bearing; (Drive Shaft) | 2 |
| 20***75 | Shaft As-Front | 1 |
288-7240 Housing & Flange Gp-Axle -Rh
| 12***77 | Washer-Thrust; (40x65x4-mm Thk) | 1 |
| 12***07 | Cone-Tapered Roller | 2 |
| 12***08 | Cup-Tapered Roller | 2 |
305-3428 Kit-Differential -Rear Axle
| 10***26 | Bolt; (M24x19.1-mm) | 8 |
| 11***87 | Kit-Spider & Bearing; (Drive Shaft) | 2 |
| 30***69 | Shaft As; (Rear) | 1 |
254-0127 Mounting Gp-Axle
| 12***94 | Washer-Thrust; (40x70x4-mm Thk) | 1 |
| 12***00 | Washer-Thrust; (50x70x4-mm Thk) | 1 |
| 12***05 | Cup-Tapered Roller | 2 |
254-5703 Mounting Gp-Transmission
| 12***94 | Washer-Thrust; (40x70x4-mm Thk) | 1 |
| 12***00 | Washer-Thrust; (50x70x4-mm Thk) | 1 |
| 12***05 | Cup-Tapered Roller | 2 |
210-5924 Planetary Gp-Final Drive
| 12***94 | Washer-Thrust; (40x70x4-mm Thk) | 1 |
| 12***00 | Washer-Thrust; (50x70x4-mm Thk) | 3 |
| 12***86 | Ring-Seal | 1 |
254-0130 Power Train Ar
| 12***94 | Washer-Thrust; (40x70x4-mm Thk) | 1 |
| 12***00 | Washer-Thrust; (50x70x4-mm Thk) | 3 |
| 12***86 | Ring-Seal | 1 |
274-4580 Shaft Gp-Counter
| 09***27 | Ring-Retaining | 1 |
| 09***28 | Ring-Retaining; (External) | 1 |
| 12***85 | Retainer | 1 |
202-5732 Shaft Gp-Drive -Front
| 12***77 | Washer-Thrust; (40x65x4-mm Thk) | 1 |
| 12***78 | Ring-Seal | 1 |
| 12***84 | Spacer; (45x49x8-mm Thk) | 1 |
216-4475 Shaft Gp-Drive -Rear
| 20***63 | Transmission Group-Power Shift; -All Wheel Drive | 1 |
| 21***75 | Shaft Group-Drive; -Rear | 1 |
| 25***03 | Mounting Group-Transmission | 1 |
274-4561 Shaft Gp-Idler
| 11***07 | Drive Group-Flexible Coupling | 1 |
| 11***40 | Filter-Oil; (Standard Efficiency)(Transmission) | 1 |
| 21***16 | Torque Converter As | 1 |
288-7239 Shaft Gp-Idler
| 10***88 | Shim; (0.05-mm Thk) | 2 |
| 10***61 | Plate-Cover | 1 |
| 11***85 | Seal-O-Ring; (13.94mm Id) | 1 |
274-4578 Shaft Gp-Input
| 10***88 | Shim; (0.05-mm Thk) | 2 |
| 10***61 | Plate-Cover | 1 |
| 11***85 | Seal-O-Ring; (13.94mm Id) | 1 |
288-7249 Shaft Gp-Input
| 10***88 | Shim; (0.05-mm Thk) | 2 |
| 10***61 | Plate-Cover | 1 |
| 11***85 | Seal-O-Ring; (13.94mm Id) | 1 |
274-4582 Shaft Gp-Output -Main
| 14***25 | Connector As. | 1 |
| 14***68 | Elbow Group | 3 |
| 15***41 | Block | 2 |
280-7007 Shaft Gp-Output -Front
| 09***68 | Bolt-Socket Head; (M5x0.8x8-mm) | 2 |
| 22***98 | Valve Group-Solenoid | 1 |
| 25***30 | Kit-Seal; (Valve) | 1 |
272-0750 Transmission & Mounting Gp
| 10***86 | Seal-O-Ring | 1 |
| 27***50 | Transmission & Mounting Group | 1 |
| 6V***78 | Seal-O-Ring; (25.12mm Id) | 1 |
269-9263 Transmission Ar-Power Shift -All Wheel Drive, Autoshift
| 26***63 | Transmission Ar-Power Shift; -All Wheel Drive, Autoshift | 1 |
| 2D***28 | Core-Valve | 1 |
| 2D***29 | Grommet | 1 |
201-8563 Transmission Gp-Power Shift -All Wheel Drive
| 20***20 | Valve Group-Tire | 1 |
| 20***63 | Transmission Group-Power Shift; -All Wheel Drive | 1 |
| 27***12 | Wheel As; (Front) | 1 |
254-0121 Valve & Lines Gp-Diff Lock
| 20***15 | Mounting Group-Wheel; (Front) | 1 |
| 20***19 | Nut; (M20x1.5-Thd) | 16 |
| 25***21 | Valve & Lines Group-Diff Lock | 1 |
233-7132 Valve & Mtg Gp-Solenoid
| 20***20 | Valve Group-Tire | 1 |
| 23***32 | Valve & Mtg Group-Solenoid; -12-Vdc-Hydraulic Lockout, Work Tool Psnr | 1 |
| 27***11 | Wheel As; (Rear) | 1 |
274-8048 Valve & Mtg Gp-Solenoid -Differential Lock
| 20***20 | Valve Group-Tire | 1 |
| 27***11 | Wheel As; (Rear) | 1 |
| 27***48 | Valve & Mtg Group-Solenoid; -Hydraulic Lockout, Work Tool Psnr | 1 |
147-0209 Valve Gp-Relief
| 14***09 | Valve Group-Relief; -Pump Pressure-Pressure Regulator | 1 |
| 20***16 | Mounting Group-Wheel; (Rear) | 1 |
| 20***19 | Nut; (M20x1.5-Thd) | 20 |
254-0196 Wheel & Tire Ar
| 25***96 | Wheel & Tire Ar | 1 |
| 27***21 | Seal-O-Ring | 1 |
| 28***29 | Piston-Brake | 1 |
272-5113 Wheel & Tire Gp -Lh
| 15***16 | Switch As; (Parking Brake Alarm) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***68 | Fastener-Panel | 2 |
272-5119 Wheel & Tire Gp -Rh
| 27***19 | Wheel & Tire Group; -Rh | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 1 |
| 8T***24 | Washer-To Assemble Valve As And Plates | 1 |
272-5114 Wheel & Tire Gp -Rh
| 16***53 | Lever Group-Hand Control; -Parking Brake | 1 |
| 26***19 | Cable As | 1 |
| 27***14 | Wheel & Tire Group; -Rh | 1 |
272-5120 Wheel & Tire Gp -Rear
| 14***83 | Elbow As | 2 |
| 15***26 | Elbow As | 1 |
| 20***52 | Seal | 1 |
321-2541 Wheel & Tire Gp
| 14***18 | Connector As | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***67 | Elbow Group; (Each Includes) | 2 |
272-5115 Wheel & Tire Gp -Front
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***34 | Switch As-Limit; (Service Brake) | 2 |
| 14***85 | Nut-Weld; (M10 X 1.5 Thd) | 2 |
272-5118 Wheel & Tire Gp -Lh
| 03***33 | Pin; (38.86 mm Lg) | 1 |
| 16***98 | Grip | 1 |
| 16***99 | Cover | 1 |
288-7300 Wheel Gp-Final Drive & Brake
| 25***36 | Bearing | 1 |
| 25***71 | Kit-Seal; (Metering Pump, Steering) | 1 |
| 26***35 | Race-Bearing | 2 |
Service Equipment And Supplies
254-0104 Film Gp
| 25***04 | Film Group | 1 |
216-0909 Lock Gp-Vandalism
| 21***09 | Lock Group-Vandalism | 1 |
254-0103 Plate & Film Gp
| 25***03 | Plate & Film Group | 1 |
284-8483 Plate & Film Gp
| 28***83 | Plate & Film Group | 1 |
263-8591 Plate & Film Gp
| 26***91 | Plate & Film Group | 1 |
206-1701 Protection Gp-Vandalism -Rotating Guard
| 20***01 | Protection Group-Vandalism; -Rotating Guard | 1 |
112-9177 Transport Gp-Machine
| 11***77 | Transport Group-Machine | 1 |
Steering System
153-7369 Knob Gp-Steering
| 15***69 | Knob Group-Steering | 1 |
| 24***29 | Extension-Fender; (Lh) | 1 |
| 24***30 | Extension-Fender; (Rh) | 1 |
289-3275 Lines Gp-Steering
| 16***04 | Fender; (Front) | 2 |
| 19***83 | Bolt; (M16x2x38-mm) | 4 |
| 22***01 | Bracket As; (Lh) | 1 |
345-3169 Lines Gp-Steering
| 11***63 | Clip-Spring | 1 |
| 15***83 | Washer-Hard; (8.4x35x2.5-mm Thk) | 20 |
| 19***55 | Screw-Hex Flange; (M4x1.79x17-mm) | 4 |
270-1590 Pump Gp-Metering
| 20***32 | Plate As | 1 |
| 20***35 | Plate As | 1 |
| 22***46 | Plate As | 1 |
Work Tools
104-6310 Fork Gp
| 10***10 | Fork Group; Fork Gp | 1 |
272-1700 Bucket Ar-Multipurpose
| 09***65 | Pin-Cotter | 4 |
| 09***20 | Pin-Cotter | 2 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
272-1701 Bucket Ar-Multipurpose
| 21***78 | Bracket | 2 |
| 21***80 | Bracket As | 1 |
| 21***81 | Bracket | 4 |
272-1702 Bucket Ar-Multipurpose
| 16***30 | Plate-Identification; (Cat) | 1 |
| 27***02 | Bucket Ar-Multipurpose | 1 |
| 27***12 | Bracket As | 2 |
270-9165 Bucket As-General Purpose
| 27***65 | Bucket As-General Purpose | 1 |
| 27***20 | Plate As-Side; (Rh) | 1 |
| 27***40 | Plate As-Side; (Lh) | 1 |
278-4502 Bucket As-Hoe -Heavy-Duty
| 27***02 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 30***80 | Stop As; (Rh) | 1 |
| 30***81 | Stop As; (Lh) | 1 |
278-4494 Bucket As-Hoe -Heavy-Duty
| 10***11 | Bracket As | 2 |
| 10***12 | Fork As | 2 |
| 10***16 | Pin | 1 |
275-4027 Bucket As-Hoe -Heavy-Duty
| 11***10 | Edge-Cutting | 2 |
| 27***27 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 4F***57 | Bolt-Plow; (5/8-11x2.75-In) | 8 |
278-4488 Bucket As-Hoe -Heavy-Duty
| 27***88 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 3F***08 | Bolt-Plow; (5/8-11x2.25-In) | 12 |
| 4K***67 | Nut Rear Support To Frame | 12 |
270-9163 Bucket Gp-General Purpose
| 22***83 | Tine As-Thumb; (24-In) | 1 |
| 27***63 | Bucket Group-General Purpose | 1 |
| 27***05 | Cylinder & Lines Group-Thumb | 1 |
275-4026 Bucket Gp-Hoe
| 27***35 | Tine As-Thumb | 1 |
| 27***26 | Bucket Group-Hoe | 1 |
| 27***05 | Cylinder & Lines Group-Thumb | 1 |
278-4499 Bucket Gp-Hoe
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
| 16***89 | Tack-Fastener | 4 |
278-4487 Bucket Gp-Hoe
| 27***87 | Bucket Group-Hoe | 1 |
| 27***05 | Cylinder & Lines Group-Thumb | 1 |
| 27***72 | Thumb Group | 1 |
278-4493 Bucket Gp-Hoe
| 27***93 | Bucket Group-Hoe | 1 |
| 27***73 | Thumb Group | 1 |
| 27***80 | Mounting Group-Cylinder | 1 |
272-1703 Bucket Gp-Multipurpose
| 27***03 | Bucket Group-Multipurpose | 1 |
272-1707 Bulldozer As
| 27***07 | Bulldozer As | 1 |
272-1708 Bulldozer As
| 27***08 | Bulldozer As | 1 |
272-1719 Clam As-Multipurpose Bucket
| 27***19 | Clam As-Multipurpose Bucket | 1 |
9r-7948 Edge Gp-Cutting
| 9R***48 | Edge Group-Cutting | 1 |
9r-5320 Edge Gp-Cutting
| 9R***20 | Edge Group-Cutting | 1 |
303-4603 Stop Gp-Bucket
| 30***03 | Stop Group-Bucket, Hydraulic Hose; Hose, Hydraulic Hose, Bracket | 1 |
282-5411 Thumb Ar
| 12***80 | Shield-Striker | 2 |
| 12***56 | Bushing | 12 |
| 12***57 | Bushing | 8 |
279-4184 Thumb Ar
| 20***60 | Mounting Group-Cab | 1 |
| 20***69 | Roof Group-Cab | 1 |
| 20***78 | Mirror Group-Rear View; -Interior | 1 |
279-4171 Thumb Ar
| 11***09 | Knob-Control | 1 |
| 11***27 | Screw-Machine; (M6x1x30-mm) | 3 |
| 12***12 | Screw-Pan Head; (8-16x0.32-In) | 2 |
279-4173 Thumb Gp
| 20***05 | Glass; (Front, Lh) | 1 |
| 20***06 | Glass; (Front, Rh) | 1 |
| 27***14 | Canopy As | 1 |
279-4172 Thumb Gp
| 20***60 | Mounting Group-Cab | 1 |
| 20***69 | Roof Group-Cab | 1 |
| 20***18 | Floor Mat Group | 1 |
274-5832 Tine As-Thumb
| 12***27 | Screw-Pan Head; (M3x0.5x16-mm) | 2 |
| 18***93 | Plug | 1 |
| 20***58 | Cover As-Steering Column; (Upper) | 1 |
274-5837 Tine As-Thumb
| 09***30 | Pin, Spring | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***91 | Nut-Jam; (3/4-16-Thd) | 1 |
274-5829 Tine As-Thumb
| 20***96 | Console As; (Lh) | 1 |
| 20***98 | Door-Storage | 1 |
| 20***99 | Cup Holder; (Front) | 1 |
274-5839 Tine As-Thumb
| 09***30 | Pin, Spring | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***91 | Nut-Jam; (3/4-16-Thd) | 1 |
274-5835 Tine As-Thumb
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 25***37 | Boot | 1 |
274-5819 Tine As-Thumb
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 22***96 | Seal-O-Ring | 2 |
| 22***56 | Valve As-Relief | 1 |
274-5826 Tine As-Thumb
| 16***78 | Clip | 1 |
| 16***51 | Fastener | 1 |
| 17***91 | Nut-Spring | 5 |
274-5823 Tine As-Thumb
| 27***23 | Tine As-Thumb | 1 |
| 31***41 | Mount | 4 |
| 35***84 | Core As-Condenser | 1 |
450E serial number reference
The PIN/serial plate on the 450E is on the front frame near the cab, close to the base of the loader arm pivot (usually the left side, but check both sides — placement can vary). Read the first 3 characters as the machine (model) prefix — this identifies the specific build series, not the calendar year — and the following digits as the individual unit sequence number. Cat's engine serial plate (on the engine block) carries its own separate prefix and does not match the machine prefix.
| Prefix | Identifies | Notes |
|---|---|---|
| EBL | 450E Backhoe Loader, Center-Pivot configuration | Runs EBL00001 and up. Powered by the Cat C4.4 turbocharged diesel (about 102 kW / 137 hp gross, Tier 3/Stage III). Appears across the power train, axle, transmission and control groups in the factory parts book for this range. Series/build-year break not documented beyond the prefix itself — check the PIN plate against the dealer parts lookup for exact year. |
| RBA | 450E Backhoe Loader | Runs RBA00001 and up. Also powered by the Cat C4.4 diesel; covered by its own factory parts manual, with a matching engine-serial range starting at 1. Listed only as "450E Backhoe Loader" in source part listings, without the Center-Pivot callout seen on the EBL range — configuration difference vs. EBL not fully confirmed; confirm with dealer. |
Frequently asked questions
What engine does the Caterpillar 450E backhoe loader use?
A Cat C4.4 ACERT four-cylinder turbocharged diesel meeting Tier 3/Stage IIIA emissions, rated 102 kW (137 hp) gross and 92 kW (124 hp) net.
What is the operating weight of the Caterpillar 450E?
About 10,950 kg (24,141 lb) in standard configuration. Actual weight varies by series/configuration, cab vs. canopy, stick length, counterweight, and attachments, so treat this as a baseline figure.
What replaced the Caterpillar 450E backhoe loader?
The Cat 450F, a Tier 4-Interim generation backhoe loader introduced around 2013 that carried the C4.4 platform forward with higher torque and electronically controlled load-sensing hydraulics.
What 450E owners discuss
How does the 450E powertrain behave day to day, automatic vs manual?
The 450E runs a 5-speed by 3-range powershift transmission with a single-stage torque converter, switchable between full automatic (shifts by grade and load, top gear set on a twist-grip at the steering column) and manual powershift mode via a kickdown switch on the loader control. Holding that kickdown switch past about a second turns it into a transmission neutralizer, holding engine and hydraulic speed steady while loading a truck without the machine creeping forward. Owners doing repetitive truck-loading cycles tend to run manual so they can lock a specific gear rather than let the auto mode hunt; roading and general digging get left in automatic.
Any known weak points in the hydraulic system?
It is a closed-center, load-sensing circuit built around a variable-displacement piston pump plus a supplemental gear pump, with published flow around 190 to 195 l/min (roughly 50 to 51 gpm combined) and working pressure near 245 bar (3550 psi) on the loader side and 262 bar (3800 psi) on the backhoe side; these figures vary slightly by source and configuration. Owner feedback rates the system responsive and quiet in normal use. The complaint that does recur: the hoe or loader bogging under sustained heavy pushing, described as going dead or limp, while digging in the ground stays strong. That pattern points at a restricted hydraulic filter or suction screen well before it points at the pump itself, so check filter condition and change intervals first.
What engine quirks show up on the C4.4 ACERT in this machine?
The 450E uses the Cat C4.4 ACERT, a four-cylinder, turbocharged, direct-injection diesel meeting Tier 3/Stage IIIA without DEF or an aftertreatment box. That is a point owners weighing this generation against newer Tier 4 backhoes raise often, since a Tier 3 machine skips the DEF pump, NOx sensor, and regen headaches that come with later emissions tiers. Separately, on the wider C4.4 engine family (not tied to a specific emissions tune), rough idle or unstable rail pressure with no stored fault code has been traced to a weak fuel pressure sensor or a tired transfer pump, and the crank speed timing ring can occasionally loosen at its mounting, causing a no-run condition once the two speed signals stop agreeing with each other. Treat these as known failure modes on the engine family generally rather than something every 450E will hit.
What wears on a 450E instead of a track undercarriage?
Being wheeled, the wear items are pin and bushing sets on the loader arms and backhoe boom, stick, and bucket linkage, the stabilizer pads, and the tires. Excess play or an audible clunk at any pivot is the usual sign of bushing wear, and both over-greasing and under-greasing get blamed for shortening pin life, so sticking to the factory lube interval matters more than owners expect. The flip-over stabilizer pads (dirt face one side, flat street pad the other) should be checked for flatness and wear, since a worn pad rocks the machine under load. Front tire wear tends to go uneven under heavy digging duty cycles; running the drive selector in two-wheel-drive for roading (front axle then only engages under braking) extends front tire life compared with leaving four-wheel-drive engaged full time.
What electrical or sensor issues come up on the 450E?
One documented case: a 450E lost hoe and stabilizer function after a fuse kept blowing, and it blew the instant the key was turned on, before any cranking or load, which points at a dead short in the harness rather than a simple overload. The diagnostic path other owners walked through was pulling the ride-control relay to see if the fuse still blew on key-on alone, then working back through the harness segment that carries switched key power to the hoe and stabilizer circuits looking for a chafed or pinched wire. A fuse that blows instantly rather than under load should always be treated as a short, not fixed by stepping up to a larger fuse. Have your dealer verify and trace any repeat-blown-fuse electrical fault before returning the machine to work.
What should I check when buying a used 450E?
Confirm the serial number and prefix to pin down model year and factory options; a standard versus extendable stick changes dig depth by roughly 1.2 m (about 4 ft), which affects value. Cycle every hydraulic function under load listening for cavitation or delayed response, and inspect cylinder rods for pitting, scoring, or weeping at the seals. Have a second person cycle the loader and backhoe while you check pin and bushing joints by hand for slop. Look over the frame, boom, and stabilizer mounts for cracks or repair welds. Confirm the transmission shifts cleanly in both automatic and manual kickdown modes and that the neutralizer holds smoothly without lurching. Check tires for uneven wear, which can flag an axle or alignment problem. Have the stored fault code history pulled at a dealer rather than trust a machine with a suspiciously clean or blank code log from a private sale. Structural and hydraulic condition are safety items, so have your dealer verify before you commit to a purchase.
Does the 450E have any particular cold-weather starting behavior?
Owners in cold climates generally order or retrofit the cold-weather package: extra battery, block heater, cold-rated fuel and coolant fill, and a mounting point for an ether-start bottle, since a standard battery can lose a large share of its cranking capacity in deep cold and the four-cylinder engine needs decent cranking speed to reach ignition temperature. General diesel cold-start habits apply on top of that: let the glow-plug cycle run its full duration before cranking rather than cutting it short (repeating the cycle a few times will drain the battery faster but will not hurt the plugs), and run a winter-blend fuel or cetane-boosting additive, since winter diesel blends are harder to ignite than summer blends.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 450E part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.