Caterpillarbackhoe loader(no series)
Caterpillar 446D
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 446D is a heavy-duty center-pivot backhoe loader built from 2004 to 2008, sitting at the top of Cat's 4-series backhoe range above the lighter 416/420/430 class machines. It runs a Cat 3114 DIT, a 4.4 L direct-injection turbocharged 4-cylinder diesel rated about 82 kW (110 hp) gross and 76 kW (102 hp) net, the same base engine family Cat used across the 446 lineage: the original 446 (late 1980s to mid-1990s) ran a lower-tune version around 71 kW (95 hp), and the 446B (1990s into the early 2000s) shared the turbocharged 102 hp net rating with the D. Operating weight runs from about 8,920 kg (19,666 lb) in base 4x2 trim up to roughly 11,500 kg (25,357 lb) fully configured with 4x4 MFWD, cab, counterweight and full fluids. Cat offered the 446D in 2WD and 4WD MFWD drivelines, with ROPS canopy or enclosed cab, mechanical (Ford or Dynahoe pattern) or pilot-operated backhoe controls, and standard or deluxe operator station trim, paired with a powershift transmission and Cat's autoshift feature.
Across the 446 to 446B to 446D progression, Caterpillar kept the same 4.4 L 3114 block but reworked turbo boost, fuel delivery and hydraulics for more breakout force and faster cycle times, while the cab moved from basic gauges to a deluxe air-suspension seat with fuel-water-separator, air-cleaner and hydraulic-filter service indicators by the D-series. Caterpillar retired the 446 nameplate after the D and never released a 446E; the heavy-duty size class it once anchored is now covered by the 450 at the top of Cat's current center-pivot backhoe range. Because the 446D shares its 3114 engine, axle and hydraulic architecture with the 446B and with related Cat machines of the same era, used units and their parts stay in active circulation, and buyers price them mainly on engine hours, hydraulic condition and backhoe pin and bushing wear rather than on rarity.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 446D specifications
Engine
| Engine model | Cat 3114 DIT (Direct Injection Turbocharged), 4-cylinder |
| Gross power | 82 kW (110 hp) per Caterpillar rating; 81 kW (109 hp) per SAE J1995 |
| Net power | 76 kW (102 hp) per Caterpillar, ISO 9249, ISO 1585 and EEC 80/1269 ratings; 75 kW (101 hp) per SAE J1349 (107 metric hp per DIN 70020) |
| Displacement | 4.4 L (268 in3) |
| Bore and stroke | 105 mm x 127 mm (4.13 in x 5.00 in) |
| Peak torque | 455 N*m (336 lb ft) at 1400 rpm; net torque rise 32.6% at 1400 rpm; rated engine speed 2200 rpm |
| Emissions tier | Not stated on the factory spec sheet for this production run (2004-2008); confirm current tier/certification with your dealer for a specific serial number |
Weights
| Nominal operating weight | 8939 kg (19,666 lb) - standard machine with 1.15 m3 general-purpose loader bucket, 610 mm standard-duty backhoe bucket, 80 kg operator and a full fuel tank |
| Maximum operating weight | 11 500 kg (25,357 lb) |
Dimensions
| Overall transport length | 7952 mm (26 ft 1 in) with 1.15 m3 GP loader bucket; up to 7990 mm (26 ft 3 in) with the larger 1.34 m3 GP bucket, depending on loader bucket fitted |
| Overall transport height | 4182 mm (13 ft 9 in), same figure for standard stick or extendible stick and across all loader bucket options |
| Overall width | 2477 mm (8 ft 2 in) |
| Height to top of cab/canopy | 2899 mm (9 ft 6 in) |
| Height to top of exhaust stack | 2960 mm (9 ft 9 in) |
| Ground clearance (minimum) | 332 mm (1 ft 1 in) |
| Wheelbase | 2233 mm (7 ft 4 in), same for 2WD and all-wheel-drive versions |
| Front wheel tread gauge | 1970 mm (6 ft 6 in) |
| Rear wheel tread gauge | 1800 mm (5 ft 11 in) |
| Stabilizer spread | transport position 2477 mm (8 ft 2 in); operating position 3614 mm (11 ft 10 in) center-of-pad, 4084 mm (13 ft 5 in) outside edge of pad |
Performance
| Travel speed, forward (autoshift, 5-speed) | 1st 5.6 kph (3.5 mph) up to 5th 31.5 kph (19.6 mph) |
| Travel speed, reverse (autoshift, 3-speed) | 1st 5.6 kph (3.5 mph) up to 3rd 20.6 kph (12.8 mph) |
| Backhoe dig depth (SAE max) | standard stick 5142 mm (16 ft 10 in); extendible stick retracted 5207 mm (17 ft 1 in); extendible stick extended 6457 mm (21 ft 2 in) |
| Backhoe reach from swing pivot | standard stick 6636 mm (21 ft 9 in); extendible stick retracted 6697 mm (22 ft); extendible stick extended 7890 mm (25 ft 11 in) |
| Backhoe bucket dig force | standard stick 75.4 kN (16,950 lb); extendible stick (retracted or extended) about 73 kN (16,400 lb) |
| Backhoe stick dig force | standard stick 50.8 kN (11,430 lb); extendible stick retracted 50.1 kN (11,260 lb); extendible stick extended 36.8 kN (about 8250-8280 lb) |
| Loader lift capacity (full height) | 4351 kg (9,572 lb) with the 1.15 m3 general-purpose bucket; varies slightly (about 4040-4350 kg) with multi-purpose or larger 1.34 m3 bucket |
| Loader bucket breakout force | 61.7 kN (13,838 lb) with the 1.15 m3 general-purpose bucket; ranges roughly 57-63 kN across bucket options |
| Turning radius (outside, braked) | 2WD 8.8 m (28 ft 1 in); all-wheel-drive 11.4 m (37 ft 4 in) |
| Backhoe swing arc / bucket rotation | 180 degree swing arc; bucket rotation 190 degrees on standard stick, 187 degrees on extendible stick |
Service capacities (summary)
| Fuel tank | 125 L (33 gal) |
| Hydraulic system, total | 154 L (41 gal), of which the hydraulic tank holds 57 L (15.1 gal) |
| Engine oil (with filter) | 11 L (2.9 gal) |
| Cooling system | 30 L (7.9 gal) |
| Transmission (2WD, autoshift) | 26 L (6.9 gal) |
| Rear axle | 31 L (8.2 gal) |
| Front axle (all-wheel-drive) | 9.3 L (2.5 gal); front axle planetaries 0.8 L (0.21 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
446D fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase, with filter (Cat 3114 DIT) | 11.0 L (2.9 US gal / 11.6 qt) | Cat DEO (Diesel Engine Oil), diesel-rated multigrade oil. SAE 10W-30 preferred for -18°C to 40°C (0°F to 104°F); SAE 15W-40 for warmer sustained ambient; SAE 0W-40 or 5W-40 for cold-start climates below -18°C. Match exact grade to the OMM viscosity-by-ambient chart for your serial range. |
| Cooling system | 29.9 L (7.9 US gal / 31.6 qt) | Cat ELC (Extended Life Coolant), factory premix or 50/50 concentrate-to-water mix. Cat DEAC conventional coolant/antifreeze listed as an alternate; don't mix ELC and DEAC chemistries in the same system. |
| Fuel tank | 124.9 L (33.0 US gal) | No. 2-D diesel fuel for normal ambient; No. 1-D or a winter-blend diesel below about -1°C (30°F) to guard against fuel gelling/waxing. |
| Transmission (Auto-Shift powershift compartment) | 26.1 L (6.9 US gal / 27.6 qt) | Cat TDTO (Transmission/Drive Train Oil), TO-4 spec. SAE 10W for cold-ambient starts, SAE 30 for moderate climates, SAE 50 for sustained hot ambient; TDTO-TMS multiseason blend covers a wider swing. Verify the exact grade break points against the OMM chart. |
| Hydraulic system, total (tank, lines, cylinders) | 155.2 L (41.0 US gal) | Cat HYDO Advanced (Cat Bio HYDO Advanced where a biodegradable fluid is called for). Cat TDTO (TMS) is listed as an acceptable alternate if Cat hydraulic oil isn't on hand. SAE 10W for cold ambient, SAE 30 for warm. |
| Hydraulic tank (reservoir refill only) | 57.2 L (15.1 US gal) | Same fluid as the hydraulic system above — Cat HYDO Advanced, graded by ambient temperature per the OMM chart. |
| Front axle differential (4WD/AWD-equipped machines) | 9.5 L (2.5 US gal) | Cat TDTO, TO-4 spec, same climate-based viscosity grading as the transmission. Applies only to machines built with the front-drive axle — confirm configuration before servicing. |
| Front axle planetary hubs, per side (4WD/AWD-equipped machines) | 1.1 L (0.3 US gal) per side | Cat TDTO, TO-4 spec, matched to the front axle differential fill. |
| Rear axle differential | 31.0 L (8.2 US gal) | Cat TDTO, TO-4 spec, same climate-based viscosity grading as the transmission and front axle. |
| Grease, all lube points (spec only, no refill capacity) | not applicable — service per grease-point schedule, not a fill volume | NLGI 2 multipurpose grease. Standard Cat grease for normal climates; Cat Desert Grease (or equivalent) for sustained high heat; Cat Arctic Platinum Grease for sustained sub-zero cold. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 446D maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 3,000 h |
|
| Every 6,000 h |
|
Servicing the 446D beyond the schedule
Predictive Maintenance & Fluid Analysis
Run oil sampling on the Cat 3114 DIT at every engine oil change; turbocharged direct-injection 4-cylinder diesels of this era show bearing and injector wear early in trace-metal counts. Pull hydraulic oil samples alongside the 2000-hour hydraulic oil change, since the variable-flow piston pump and backhoe control valve are the most expensive failure points on this machine. Track coolant condition between service points, and watch differential and final drive oil for water intrusion on 4x4 MFWD units working wet excavation sites.
Corrective & Common Repairs
Typical 446D repairs center on backhoe boom, stick and bucket pin and bushing wear from the center-pivot mounting, stabilizer cylinder seal leaks, and hydrostatic steering pump or orbital valve wear on 4x4 units. The 3114 DIT's turbocharger and injectors are the common engine-side failure points past mid-life hours. Autoshift transmission solenoid and speed-sensor faults show up as harsh or delayed shifts. Loader lift and tilt cylinder seal kits, plus backhoe swing cylinder wear, are routine replacements on higher-hour machines.
Overhaul & Rebuild Points
A 446D overhaul centers on the 3114 DIT long block, injectors, turbocharger and cylinder head after extended high-load hours, plus the powershift transmission clutch packs and autoshift control valve. Rebuild the backhoe boom, stick and bucket pin-and-bushing set and swing frame bearings together; center-pivot mounts wear unevenly if serviced piecemeal. On 4x4 units, inspect the front axle differential and planetary final drives for bearing wear at major overhaul, and reseal the variable-flow hydraulic pump before it cavitates.
Seasonal & Environment Servicing
Before winter, switch to a cold-weather engine oil viscosity for the 3114 DIT and check coolant freeze protection; a block heater helps cold-starts on a turbocharged 4-cylinder diesel. In hot, dusty conditions, service the engine air filter and radiator core more often than the standard interval and check hydraulic oil cooler fins for packed debris. On wet or muddy sites, grease backhoe and loader pins more frequently than the daily interval and inspect final drive seals for water intrusion.
446D common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 112-6523 | Insert-Fuel Filter | Fuel system service | Check fitment → |
| 1R-0753 | Filter-Fuel | Fuel system service | Check fitment → |
| 117-4089 | Element-Water Separator | Fuel system service | Check fitment → |
| 108-0671 | Filter Element-Air | Air intake service | Check fitment → |
| 108-0672 | Filter Element-Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
446D fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| Charging System Warning Light (amber, battery symbol) | Alternator output or system voltage is out of normal range; battery is not being properly charged. | Worn or failed alternator, loose/broken drive belt, corroded battery terminals, or a break in the charging circuit wiring. | Check belt tension and condition, clean and tighten battery terminals, verify alternator output with engine running before continuing work. |
| Engine Coolant Temperature Warning Light (red, thermometer symbol) | Engine coolant temperature has exceeded the normal operating range. | Low coolant level, debris-blocked radiator core, worn drive belt, failed water pump, or a bad temperature sensor. | Shut down and allow the engine to cool, check coolant level and radiator fins for blockage, inspect belt tension and thermostat operation before restart. |
| Engine Oil Pressure Warning Light (red, oil-can symbol) | Engine oil pressure has dropped below the minimum safe threshold. | Low oil level, worn oil pump, clogged oil filter, or a faulty oil pressure sensor/sender. | Stop the engine immediately, check oil level and look for external leaks, inspect the filter and sender before restarting. |
| Hydraulic Oil Temperature Warning Light | Hydraulic oil temperature has reached the high-temperature threshold, around 110C (230F). | Low hydraulic fluid level, a clogged or fouled oil cooler, extended relief-valve operation under heavy load, or a cooling fan fault. | Reduce hydraulic implement use and let the system cool, check fluid level, clean debris from the cooler core, inspect the cooling fan. |
| Hydraulic Filter Bypass Indicator | The hydraulic return filter is restricted enough that oil is bypassing the element unfiltered. | Filter element loaded with contamination, cold/high-viscosity oil on startup, or overdue filter service. | Replace the hydraulic filter element, sample the fluid for contamination, recheck the indicator after a warm-up cycle. |
| Air Filter Restriction Indicator | Intake air filter restriction has exceeded the allowable limit, reducing airflow to the turbocharged engine. | Clogged primary or secondary air filter element, dusty jobsite conditions, or a damaged intake hose allowing bypass air. | Service or replace the air filter element, inspect intake piping and clamps for leaks or damage. |
| Loader/Backhoe Lockout Indicator Light | The hydraulic implement lockout (safety lever) is engaged, disabling loader or backhoe control function. | Lockout lever left in the locked position, or a fault in the lockout switch/solenoid circuit. | Confirm the lockout lever is fully in the unlocked position; if the light stays on, check the lockout switch and its wiring. |
| Parking Brake Warning Light | Park brake is applied, or the park brake system has a fault. | Park brake left engaged before attempting to travel, low brake system pressure, or a faulty park brake switch. | Release the park brake before travel; if the light stays lit with the brake released, check brake system pressure and the switch. |
| Water-in-Fuel Indicator | Water has been detected in the primary fuel/water separator. | Water contamination in the fuel supply, condensation in the tank, or a worn tank filler cap seal. | Drain the water separator, check the fuel source and tank cap seal, inspect fuel for contamination. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
446D attachments & work tools
Engine and hydraulic baseline
The 446D runs a Cat 3114 DIT turbocharged diesel rated around 76 kW (102 hp) net, feeding a variable-flow, load-sensing, closed-center hydraulic system rated up to about 178 L/min (47 gpm) at 244 bar (3,550 psi). Any powered work tool (hammer, compactor) draws from this same circuit, so its flow and pressure rating has to stay inside these limits.
Backhoe buckets
Rear buckets are offered in 457-914 mm (18-36 in) heavy-duty widths at 0.18-0.44 m3 (6.3-15.5 cu ft) capacity, and 610-762 mm (24-30 in) extreme-service widths at 0.16-0.21 m3 (5.7-7.3 cu ft) for harder digging conditions. The published standard test configuration runs a 610 mm (24 in) heavy-duty bucket. Bolt-on two-piece cutting edges are a separate option for the bucket.
Loader buckets
Front loader buckets come as general-purpose in 1.15 m3 (1.5 yd3) or 1.34 m3 (1.75 yd3) capacity, plus a multi-purpose (4-in-1 style) bucket at roughly 1.25 m3 (1.63 yd3) with a bolt-on cutting edge. Side-dump and light-material buckets are also offered for this size class. Loader bucket teeth are an added option on any of these.
Loader forks and broom
Pallet forks and a hydraulically driven broom are offered as loader-mounted work tools for material handling and sweeping/cleanup duty. Both mount through the loader's front coupling in place of a bucket.
Backhoe hydraulic hammer
A hydraulic hammer is a listed backhoe work tool for this model. For the 8.9-11.5 tonne operating-weight range this machine falls in, a medium-duty breaker sized to roughly 10-15% of operating weight is the class-typical match; exact model and flow rating vary by dealer fitment chart and machine configuration.
Vibratory plate compactor
A backhoe-mounted vibratory plate compactor is offered for trench and utility backfill compaction, swapped onto the stick in place of the digging bucket.
Loader hydraulic quick coupler
An optional 3rd loader hydraulic valve enables a hydraulic quick coupler on the loader arm, letting general-purpose, multi-purpose, or other loader tools swap without leaving the cab. Without this valve, loader buckets pin on directly.
Auxiliary hydraulic kits
Running a hammer, compactor, or similar powered backhoe tool needs the optional backhoe auxiliary valve plus a matching hydraulic-line kit: 2-way lines routed to the boom for tools needing reversible flow, or universal 1-way lines routed to the stick for single-direction tools like hammers.
Backhoe control patterns
Backhoe controls are ordered as mechanical levers in either Ford or Dynahoe pattern, or as pilot hydraulic joystick controls with a pattern changer valve that switches between backhoe and excavator-style control layouts.
Extendible stick
An optional extendible stick replaces the standard stick and extends SAE maximum digging depth from about 5.14 m (16 ft 10 in) to roughly 6.46 m (21 ft 2 in), an increase of around 1.2-1.3 m (4 ft). It needs the added counterweight option to hold rated lift-capacity figures.
Counterweight and stabilizer guarding
A 682 kg (1,500 lb) counterweight option offsets heavier configurations such as the extendible stick; backhoe lift-capacity charts are published both with and without it. A stabilizer rock guard is also offered to protect the stabilizer cylinders and pads when digging in rock or demolition debris.
Front axle and driveline guarding
An all-wheel-drive front axle with a driveshaft guard is available to improve traction for loader work-tool duty in soft or loose material. Vandalism-protection options (gauge cover, padlocks, hood lock) are also offered as jobsite security guarding.
Cab and operator configuration
A deluxe cab package is available, adding a deluxe seat, auto-up stabilizers, a voltmeter, and monitors for plugged engine air filter, hydraulic filter, and fuel/water separator. Base configuration is a ROPS canopy with an air-suspension seat and tilt steering wheel.
All 446D assemblies by section
Every catalogued assembly group for the Caterpillar 446D. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
145-7150 Air Cleaner Gp
| 10***71 | Filter Element-Air; (Primary) | 1 |
| 10***72 | Filter Element-Air; (Secondary) | 1 |
| 10***24 | Band As-Air Cleaner | 2 |
140-6015 Air Cleaner Gp
| 11***48 | Precleaner Group | 1 |
| 14***15 | Air Cleaner Group | 1 |
| 14***25 | Bracket As | 1 |
184-7901 Indicator Gp-Air Filter Change -Electric
| 11***23 | Fitting | 1 |
| 12***75 | Connector-Filter | 1 |
| 18***01 | Indicator Group-Air Filter Change; -Electric | 1 |
135-0739 Lines Gp-Air
| 13***39 | Lines Group-Air | 1 |
| 14***24 | Hose | 1 |
| 2Y***75 | Spacer; (10x15.8x11.6-mm Thk) | 4 |
126-5914 Lines Gp-Air
| 12***14 | Lines Group-Air | 1 |
| 7C***19 | Hose | 1 |
| 8T***03 | Clamp; (Hose) | 2 |
133-4986 Manifold Gp-Exhaust
| 11***00 | Gasket-Manifold | 2 |
| 13***86 | Manifold Group-Exhaust | 1 |
| 13***87 | Manifold-Exhaust | 1 |
4w-5362 Manifold Gp-Inlet
| 11***45 | Gasket | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
| 4W***62 | Manifold Group-Inlet | 1 |
253-4430 Muffler & Converter
| 25***30 | Muffler & Converter | 1 |
7c-0937 Muffler Gp
| 10***49 | Muffler As | 1 |
| 1W***69 | Clamp | 1 |
| 2Y***29 | Nut-Hard; (M10 X 1.5) | 4 |
118-6948 Precleaner Gp
| 11***48 | Precleaner Group | 1 |
| 1M***50 | Bowl | 1 |
| 9M***59 | Clamp Tube Assembly To Flange | 1 |
126-2286 Turbocharger Gp
| 12***86 | Turbocharger Group | 1 |
| 12***01 | Cartridge Group-Turbocharger | 1 |
| 12***21 | Cover-Compressor | 1 |
126-5876 Turbocharger Gp
| 12***86 | Turbocharger Group | 1 |
| 12***76 | Turbocharger Group | 1 |
| 3E***17 | Locknut; (M10x1.5-Thd)(Spiralock) | 4 |
Basic Engine
7e-3686 Balancer Gp
| 3B***98 | Key-Woodruff | 1 |
| 3D***58 | Ring-Retaining | 4 |
| 4B***83 | Ball 11.10 mm(.437 In.) Dia. | 1 |
142-7297 Camshaft Gp
| 10***94 | Plate-Thrust | 1 |
| 14***97 | Camshaft Group; (Single) | 1 |
| 14***98 | Camshaft Assem. | 1 |
4w-3462 Carrier Gp-Seal
| 23***83 | Gasket | 1 |
| 24***76 | Seal | 1 |
| 2W***46 | Cover | 1 |
1w-8897 Cover Gp-Cylinder Block
| 11***18 | Bolt As; (M8x1.25x16-mm) | 4 |
| 13***40 | Spacer; (9x15x15-mm Thk) | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
145-9349 Cover Gp-Front Housing
| 10***20 | Cover As-Front | 1 |
| 14***49 | Cover Group-Front Housing | 1 |
| 6V***17 | Bolt; (M8x1.25x30-mm)(Location Z) | 11 |
7w-7337 Cover Gp-Valve Mechanism
| 11***50 | Gasket | 1 |
| 11***63 | Cover | 1 |
| 5P***37 | Washer 5t***54 Plate To 7t***28 Cable As | 10 |
4w-3579 Crankshaft Gp
| 10***30 | Bearing-Main; (Standard) | 3 |
| 10***08 | Bearing-Main; (Standard) | 1 |
| 14***62 | Bearing; (0.25mm Undersize) | 0 |
7e-5311 Cylinder Block Gp
| 21***86 | Bearing-Sleeve; (Camshaft) | 1 |
| 2M***71 | Plug-Cup; (38.35mm Avg Od) | 2 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
4w-3724 Cylinder Block Gp
| 1W***07 | Sleeve | 2 |
| 4P***57 | Jet As-Piston Cooling | 4 |
| 4W***24 | Cylinder Block Group; Cylinder Block Group | 1 |
115-4163 Cylinder Head Gp
| 11***63 | Cylinder Head As | 1 |
| 11***61 | Sleeve | 4 |
| 1W***13 | Insert-Valve Seat; (Exhaust) | 4 |
9y-8872 Cylinder Head Gp
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 3 |
| 2M***71 | Plug-Cup; (38.35mm Avg Od) | 2 |
| 4P***91 | Gasket-Cylinder Head (1.85mm Thk); (1.85-mm Thk) | 1 |
9y-8849 Cylinder Head Gp
| 11***63 | Cylinder Head As | 1 |
| 11***36 | Seal-Valve Stem | 8 |
| 13***19 | Valve-Exhaust | 4 |
7c-4566 Drain Gp-Engine Oil
| 11***19 | Plug-Magnetic; (Engine Oil Pan Drain) | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 7C***66 | Drain Group-Oil Pan; -Magnetic Plug | 1 |
7c-0044 Drive Gp-Fan
| 4W***03 | Cup-Roller Bearing | 2 |
| 4W***04 | Cone-Roller Bearing | 2 |
| 4W***42 | Spacer; (35.3x45.5x38.331-mm Thk) | 1 |
4w-5428 Drive Gp-Water Pump
| 03***75 | V-Belt; (Pump Drive)(Water) | 1 |
| 10***67 | Plate As-Idler | 1 |
| 11***04 | Pulley As-Idler | 1 |
185-6649 Flywheel Gp
| 16***87 | Flywheel As | 1 |
| 16***88 | Sleeve | 1 |
| 18***49 | Flywheel Group | 1 |
7e-3756 Gear Gp-Front
| 2W***65 | Shaft-Idler | 1 |
| 2W***66 | Bearing-Sleeve | 1 |
| 2W***76 | Gear Assem. (50 Teeth) (Camshaft Idler) | 1 |
9y-4856 Housing Gp-Flywheel
| 1B***70 | Plug-Pipe; (Drain) | 1 |
| 1B***74 | Plug,Pipe Base Assembly,Engine Oil Filter Assembly | 1 |
| 2P***94 | Plug-Sealing | 1 |
7l-0002 Housing Gp-Front
| 1U***46 | Sealant (For Locations A) | 0 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 6 |
| 6V***18 | Bolt (M8x1.25x50mm); (M8x1.25x50-mm) | 4 |
4w-2515 Lifting Gp-Engine
| 4W***82 | Plate-Lifting; (Rear)(Rear) | 1 |
| 4W***83 | Plate-Lifting; (Front) | 1 |
| 4W***15 | Lifting Group | 1 |
4p-4740 Mechanism Gp-Fuel Pump & Valve
| 10***22 | Rocker Arm Group-Valve | 4 |
| 14***47 | Arm As-Lifter | 4 |
| 2D***42 | Ball 6.35 mm(.25 In.)Diameter | 2 |
7w-8800 Mounting Gp-Engine & Tmsn
| 3E***92 | Washer; (16.75x100x6-mm Thk) | 2 |
| 3E***24 | Mounting As | 4 |
| 6V***42 | Nut-Full; (M20x2.50-Thd) | 2 |
1w-7632 Pan Gp-Oil
| 10***20 | Pan-Oil | 1 |
| 11***22 | Gasket-Oil Pan | 1 |
| 11***22 | Gasket Material | 0 |
115-4084 Piston & Rod Gp
| 10***63 | Body As-Piston | 1 |
| 10***87 | Ring-Piston (Top-Chrome) | 1 |
| 11***84 | Piston & Rod Group | 1 |
4w-5429 Pulley Gp-Crankshaft
| 2W***81 | Plate-Clamp; (Pulley Clamp) | 1 |
| 4W***29 | Pulley Group-Crankshaft; Crankshaft Pulley Group | 1 |
| 7W***73 | Pulley-Crankshaft; (1-Groove) | 1 |
139-9458 Pulley Gp-Crankshaft
| 13***57 | Pulley-Crankshaft | 1 |
| 13***58 | Pulley Group-Crankshaft | 1 |
| 8T***15 | Bolt-Socket Head; (M10x1.5x40-mm) | 6 |
139-9012 Pulley Gp-Fan & Alt Drive
| 13***11 | V-Belt Set; (2 Belts) | 1 |
| 13***12 | Pulley Group-Fan & Alt Drive | 1 |
| 7C***01 | Pulley-Fan Drive; (2 Groove) | 1 |
139-9010 Pulley Gp-Fan & Alt Drive
| 13***10 | Pulley Group-Fan & Alt Drive | 1 |
| 6L***57 | V-Belt Set; 1829 mm (72 In) Lg-Includes 2 Belts | 1 |
| 7C***90 | Pulley-Fan Drive | 1 |
107-7722 Rocker Arm Gp
| 0L***26 | Plug -13mm(.512 In.) Outside Dia. | 1 |
| 10***91 | Seat-Wear | 1 |
| 10***76 | Rocker Arm As; (Unit Injector) | 1 |
115-4203 Seal Gp-Crankshaft
| 11***03 | Seal Group-Crankshaft | 1 |
| 22***09 | Seal Group-Crankshaft; (Rear) | 1 |
| 24***39 | Seal-Crankshaft; (Front)(Front) | 1 |
Braking System
9t-6284 Accumulator Gp-Brake -Charged
| 9T***84 | Accumulator Group-Bladder; -Charged | 1 |
205-8474 Accumulator Gp-Brake -Uncharged
| 20***74 | Accumulator Group-Brake; -Uncharged | 1 |
239-3933 Control Gp-Parking Brake
| 13***82 | Bracket | 1 |
| 15***16 | Switch As; (Parking Brake Alarm) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
163-0754 Control Gp-Parking Brake
| 16***53 | Lever Group-Hand Control; -Parking Brake | 1 |
| 16***54 | Control Group-Parking Brake | 1 |
| 16***55 | Cable Group | 1 |
9r-2323 Control Gp-Service Brake
| 10***34 | Switch As-Limit; (Service Brake) | 2 |
| 12***12 | Plate As | 1 |
| 3H***33 | Pin --Adapter To Compression Release Shaft | 1 |
163-0753 Lever Gp-Hand Control
| 03***33 | Pin; (38.86 mm Lg) | 1 |
| 16***53 | Lever Group-Hand Control; -Parking Brake | 1 |
| 16***98 | Grip | 1 |
240-2610 Lines Gp-Service Brake
Cooling System
4w-4869 Cooler Gp-Engine Oil
| 24***64 | Spring; (Yoke) | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
| 3P***56 | Seal-O-Ring; (21.82mm Id) | 2 |
7w-8752 Fan Gp-Suction
| 5P***16 | Washer; (Hard) (8.8x20.5x2mm Thk) | 8 |
| 6N***99 | Clip | 1 |
| 7C***76 | Spider As-Fan | 1 |
9r-1362 Lines Gp-Transmission Cooler
| 14***39 | Connector As. | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 2 |
| 14***60 | Elbow Group | 1 |
4w-4870 Lines Gp-Water
| 12***48 | Housing-Water Regulating | 1 |
| 12***69 | Regulator-Water Temperature; (94-Deg C) | 1 |
| 12***71 | Clamp-Hose | 2 |
7w-8761 Mounting Gp-Rad & Tmsn Cooler
| 2W***10 | Mount Assem. | 2 |
| 4N***15 | Grommet Assem. | 4 |
| 5P***16 | Washer; (Hard) (8.8x20.5x2mm Thk) | 2 |
7c-4508 Pump Gp-Water
| 15***37 | Pump Group-Water | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
159-3137 Pump Gp-Water
| 14***88 | Seal As; (Water Pump) | 1 |
| 15***52 | Impeller-Pump | 1 |
| 15***37 | Pump Group-Water | 1 |
4w-7589 Pump Gp-Water
| 2M***53 | Seal--To Seal Brake Housing To Main Housing | 1 |
| 4J***24 | Seal 46.99 mm(1.85 In.) I.D. | 1 |
| 4W***89 | Pump Group-Water | 1 |
7c-0901 Radiator & Xmsn Oil Cooler Gp
| 03***49 | Hose | 1 |
| 3J***90 | Plug Adapter Turbo Oil Supply; Plug-Adapter Turbo Oil Supply | 1 |
| 4B***74 | Washer (Required Only When Bosch Alternator Is Fitted) | 6 |
Electrical And Starting System
149-2064 Alternator Gp-Charging
| 14***64 | Alternator Group-Charging | 1 |
| 15***11 | Kit-Alternator Hardware | 1 |
| 15***12 | Kit-Alternator Terminal | 1 |
101-0544 Alternator Gp-Charging
| 10***44 | Alternator Group-Charging | 1 |
| 10***46 | Pulley-Alternator | 1 |
| 14***64 | Alternator Group-Charging | 1 |
272-5985 Battery & Wiring Gp
| 03***17 | Tread-Nonskid | 2 |
| 1M***19 | Bolt; (5/16-18x1.375-In)(5/16-18x1.375 In) | 1 |
| 1M***20 | Nut-Battery Terminal (5/16-18 Thd); (5/16-18-Thd)(5/16-18x1.375 In) | 2 |
240-8910 Battery & Wiring Gp
| 03***17 | Tread-Nonskid | 2 |
| 1M***19 | Bolt; (5/16-18x1.375-In)(5/16-18x1.375 In) | 1 |
| 1M***20 | Nut-Battery Terminal (5/16-18 Thd); (5/16-18-Thd)(5/16-18x1.375 In) | 2 |
6n-9125 Heater Gp-Jacket Water
| 12***85 | Element As-Jacket Water Heater | 1 |
| 13***48 | Kit-Seal; (Jacket Water Heater) | 1 |
| 13***17 | Cap As-Dust | 1 |
234-4328 Lamp Gp-Flood
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 20***14 | Lens As; (Floodlight) | 1 |
| 23***28 | Lamp Group-Flood; -Front, Rear, Wide Range | 1 |
234-4329 Lamp Gp-Flood
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 20***11 | Lens As | 1 |
| 23***29 | Lamp Group-Flood; -Front, Side, Long Range | 1 |
144-9933 Lamp Gp-Panel Illumination -Backlight
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 14***33 | Lamp Group-Panel Illumination; -Backlight | 1 |
| 18***10 | Lamp; (12-Volt)(Miniature) | 2 |
115-1716 Lamp Gp-Signal -Front, Cab
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***16 | Lamp Group-Signal; -Front, Cab | 1 |
| 17***85 | Screw-Flat Head; (M5x0.8x50-mm) | 2 |
115-1715 Lamp Gp-Stop & Tail
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***15 | Lamp Group-Stop & Tail | 1 |
| 17***85 | Screw-Flat Head; (M5x0.8x50-mm) | 2 |
180-3663 Lamp Gp-Warning Beacon -Fixed Mount
| 17***34 | Plug As; (Warning Beacon) | 1 |
| 18***63 | Lamp Group-Warning Beacon; -Fixed Mount | 1 |
| 27***00 | Lens; (Amber)(Warning Beacon) | 1 |
180-3664 Lamp Gp-Warning Beacon -Amber, Magnetic Mount, Rotating
| 17***34 | Plug As; (Warning Beacon) | 1 |
| 18***64 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 27***00 | Lens; (Amber)(Warning Beacon) | 1 |
241-0098 Lighting Gp-Flood & Signal
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***12 | Roof | 1 |
| 10***69 | Lamp Group-Flood; (Front) | 4 |
104-9502 Lighting Gp-Warning Beacon
| 10***02 | Lighting Group-Warning Beacon | 1 |
| 10***04 | Plate | 1 |
| 13***42 | Screw-Self-Tapping; (M5x2.3x18.8-mm) | 3 |
141-8292 Lighting Gp-Warning Beacon -Fixed Mount
| 11***16 | Bracket As-Rh | 1 |
| 13***11 | Screw; (M6x1x35-mm)(M6x1.0x20mm) | 3 |
| 14***92 | Lighting Group-Warning Beacon; -Fixed Mount | 1 |
189-5746 Sensor Gp-Speed -Output
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***36 | Pin-Connector; (14-Ga To 18-Ga) | 2 |
| 17***49 | Strap; (Marker) | 1 |
7c-7695 Solenoid Gp-Shutoff
| 15***51 | Solenoid As; (Fuel Shutoff) | 1 |
| 4B***74 | Washer (Required Only When Bosch Alternator Is Fitted) | 1 |
| 4K***88 | Seal; Adapter To Oil Pump Outlet Manifold | 1 |
134-5332 Starting Aid Gp
| 11***06 | Strap As-Ground | 1 |
| 12***42 | Gasket | 2 |
| 13***61 | Elbow | 1 |
138-6923 Starting Aid Gp-Ether
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***23 | Starting Aid Group-Ether | 1 |
| 13***08 | Switch As-Temperature; (Coolent Temperature) | 1 |
111-9860 Starting Motor Gp-Electric
| 11***60 | Starting Motor Group-Electric | 1 |
| 7X***62 | Washer-Hard; (13.5x19x0.8-mm Thk) | 2 |
| 8F***34 | Lockwasher; (External Teeth) | 1 |
7e-4834 Starting Motor Gp-Electric
| 11***60 | Starting Motor Group-Electric | 1 |
| 7E***34 | Starting Motor Group-Electric | 1 |
| 8R***92 | Wire Assem. | 1 |
240-0087 Wiring Gp-Air Conditioner
| 10***04 | Suppressor As-Arc | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***90 | Fuse; (10 Amp) | 1 |
240-8913 Wiring Gp-Autoshift
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
185-8801 Wiring Gp-Cab
| 09***34 | Terminal-Blade; (18-Ga To 22-Ga) | 2 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
185-8802 Wiring Gp-Cab -Canopy
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 4 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***98 | Connector | 1 |
186-0306 Wiring Gp-Cab
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***91 | Fuse; (15-Ampere) | 1 |
| 14***39 | Relay As | 1 |
240-4714 Wiring Gp-Console -Side
| 09***41 | Screw; (Machine) (M6x1thd) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
239-9534 Wiring Gp-Console
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
169-0625 Wiring Gp-Console -Front
| 09***41 | Screw; (Machine) (M6x1thd) | 2 |
| 09***92 | Locknut; (M6x1-Thd) | 2 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
186-0309 Wiring Gp-Console -Front, All Wheel Drive
| 10***04 | Suppressor As-Arc | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***59 | Fuse; (5-Ampere) | 1 |
240-8914 Wiring Gp-Engine
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
186-2731 Wiring Gp-Heater
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 7 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
185-8800 Wiring Gp-Platform
| 09***33 | Screw-Machine; (M4x0.7x40-mm) | 8 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
186-0304 Wiring Gp-Platform
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 4 |
190-7557 Wiring Gp-Power Receptacle
| 11***90 | Fuse; (10 Amp) | 1 |
| 17***39 | Receptacle As; (Power Supply) | 1 |
| 19***57 | Wiring Group-Power Receptacle | 1 |
240-8912 Wiring Gp-Rear
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
186-0312 Wiring Gp-Ride Control
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
186-0308 Wiring Gp-Stabilizer -Auto Up
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 4 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***90 | Fuse; (10 Amp) | 1 |
186-0307 Wiring Gp-Stabilizer Alarm -Warning
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 13***85 | Alarm-Warning; (Stabilizer) | 1 |
Engine Arrangement
134-1942 Engine Ar
| 10***31 | Lines Group-Fuel Ratio Control; Air Fuel Ratio Control Lines Group, Angle | 1 |
| 10***32 | Pump Group-Fuel Injection | 4 |
| 11***84 | Piston & Rod Group | 4 |
101-0543 Installation Ar-Engine
| 10***43 | Installation Ar-Engine | 1 |
| 10***44 | Alternator Group-Charging | 1 |
| 13***39 | Lines Group-Air | 1 |
Frame And Body
9r-2312 Box Gp-Battery
| 16***77 | Step As | 1 |
| 3B***10 | Cotter-To Inspection Door | 1 |
| 5G***81 | Shaft-Governor Control | 1 |
9r-2940 Box As-Battery
| 20***98 | Bracket As | 1 |
| 2D***16 | Washer | 1 |
| 7T***95 | Grommet | 1 |
9r-7808 Counterweight Gp
| 8T***23 | Washer-Plated; (22x35x3.5-mm Thk) | 4 |
| 8T***81 | Bolt; (M20x2.5x120-mm) | 4 |
| 9R***07 | Counterweight | 1 |
9r-1568 Counterweight Gp
| 8T***23 | Washer-Plated; (22x35x3.5-mm Thk) | 4 |
| 8T***81 | Bolt; (M20x2.5x120-mm) | 4 |
| 9R***68 | Counterweight Group | 1 |
9r-4791 Panel Gp-Side
| 14***46 | Panel As-Side; (Lh) | 1 |
| 6V***87 | Seal .8m (31.4 In.) | 0 |
| 6V***43 | Locknut; (M6x1-Thd) | 2 |
164-1148 Fender Gp-Rear
| 15***83 | Washer-Hard; (8.4x35x2.5-mm Thk) | 14 |
| 16***48 | Fender Group-Rear | 1 |
| 16***53 | Fender; (Rh) | 1 |
224-9748 Floorplate Gp
| 16***03 | Plate | 1 |
| 1L***77 | Button-- Fuel Tank Hole In Hood | 2 |
| 20***22 | Plate As | 1 |
185-0080 Floorplate Gp
| 11***90 | Mount As | 2 |
| 16***02 | Plate As | 1 |
| 16***03 | Plate | 1 |
240-7063 Floorplate Gp
| 18***34 | Plate As | 1 |
| 24***63 | Floorplate Group | 1 |
| 24***65 | Plate As | 1 |
224-9749 Floorplate Gp
| 16***03 | Plate | 1 |
| 19***95 | Stud-Weld; (M6x1x20-mm Oal) | 1 |
| 1L***77 | Button-- Fuel Tank Hole In Hood | 2 |
259-9792 Frame As-Swing
| 25***92 | Frame As-Swing | 1 |
| 25***96 | Bearing-Sleeve | 2 |
| 25***97 | Bearing-Sleeve | 2 |
240-0086 Frame Gp-Loader
| 23***77 | Frame As; (Main) | 1 |
| 24***86 | Frame Group-Loader | 1 |
| 3B***88 | Fitting-Grease; (Ejector Guide Rollers) | 2 |
9r-9642 Frame Gp-Swing
| 13***30 | Rod | 1 |
| 14***23 | Rod | 1 |
| 25***92 | Frame As-Swing | 1 |
9r-2246 Guard Gp-Drive Shaft
| 8T***23 | Washer-Plated; (22x35x3.5-mm Thk) | 2 |
| 8T***41 | Bolt-Plt; (M20 X 2.5 X 70) | 2 |
| 8T***39 | Washer; (6.0mm Thk)(M21.5x6x45mm) | 2 |
241-0687 Hood & Guard Gp
| 11***15 | Bumper As | 2 |
| 13***12 | Panel Group-Side | 1 |
| 14***05 | Spacer; (10.3x16.7x8-mm Thk) | 4 |
241-0686 Hood Gp-Engine
| 24***85 | Hood As | 1 |
| 24***86 | Hood Group-Engine | 1 |
| 25***44 | Film | 1 |
131-4112 Panel Gp-Side
| 11***64 | Panel As-Side; (Rh) | 1 |
| 13***12 | Panel Group-Side | 1 |
| 6V***87 | Seal .8m (31.4 In.) | 0 |
Fuel System
7w-8600 Control Gp-Fuel Injection
| 17***70 | Control Assem. | 1 |
| 6V***83 | Bolt (16mm Long); (M6x1x16-mm) | 3 |
| 7W***00 | Control Group-Fuel Injection; Fuel Injection Control Group | 1 |
7e-9429 Control Gp-Governor
| 5C***53 | Bolt (M6x1.00x16mm); (M6x1x16mm Thk) | 1 |
| 6I***82 | Lever As | 1 |
| 6I***83 | Spring | 2 |
240-0062 Control Gp-Governor
| 11***25 | Screw-Flat Head; (M6x1x25-mm) | 4 |
| 15***41 | Block | 3 |
| 16***95 | Knob | 1 |
7e-8794 Drive Gp-Gov & Transfer Pump
| 10***68 | Gear As-Drive; (44-Teeth), . Body | 1 |
| 10***85 | Lever-Shutoff; (Output) | 1 |
| 1W***65 | Ring-Retaining | 1 |
7w-4812 Fastener Gp-Fuel Inj Pump
| 1T***68 | Seal-O-Ring; (Fuel Injection Pump) | 1 |
| 6F***73 | Seal--To Top Cover On Selector Valve | 1 |
| 6V***18 | Bolt (M8x1.25x45mm); (M8x1.25x35-mm) | 3 |
128-3937 Filter Gp-Secondary Fuel
| 11***23 | Insert-Fuel Filter | 1 |
| 12***37 | Filter Group-Secondary Fuel | 1 |
| 1R***53 | Filter-Fuel | 1 |
130-7323 Governor Gp-Unit Injector
| 10***12 | Clevis | 1 |
| 10***13 | Piston-Servo | 1 |
| 10***87 | Ring-Tolerance | 1 |
133-4980 Governor Gp-Unit Injector
| 13***80 | Governor Group-Unit Injector | 1 |
| 13***02 | Governor Group-Unit Injector | 1 |
| 7W***12 | Fastener Group-Governor; Fastener Group(Governor) (~1c K5811) | 1 |
134-2302 Governor Gp-Unit Injector
| 13***23 | Governor Group-Unit Injector | 1 |
| 13***02 | Governor Group-Unit Injector | 1 |
| 4P***45 | Control As-Fuel Ratio | 1 |
9r-1319 Lines Gp-Fuel
| 14***10 | Adapter As | 2 |
| 15***30 | Elbow As | 2 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
143-1281 Lines Gp-Fuel Filter
| 11***33 | Tube As | 1 |
| 14***88 | Valve Group-Fuel Relief | 1 |
| 14***81 | Lines Group-Fuel Filter | 1 |
107-7731 Lines Gp-Fuel Ratio Control
| 10***80 | Tube Assem. | 1 |
| 10***31 | Lines Group-Fuel Ratio Control; Air Fuel Ratio Control Lines Group, Angle | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
7w-8434 Lines Gp-Governor Oil
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 2 |
| 4J***77 | Seal - O - Ring (11.23mm Od) | 2 |
| 6V***28 | Elbow-Face Seal (For 6.35mm Od Tube) | 1 |
107-7732 Pump Gp-Fuel Injection
| 10***32 | Pump Group-Fuel Injection | 1 |
| 11***18 | Seal-O-Ring; (26.64mm Id) | 1 |
| 12***16 | Fuel Injector Group | 1 |
140-6016 Pump Gp-Fuel Prm & Prim Filter
| 11***67 | Separator Group-Water; -Primary | 1 |
| 13***41 | Pump Group-Fuel Priming; (Hand) | 1 |
| 14***16 | Pump Group-Fuel Prm & Prim Filter | 1 |
118-1467 Separator Gp-Water -Primary
| 11***89 | Element-Water Separator; (Water/Fuel Seperator) | 1 |
| 11***61 | Base Assem. | 1 |
| 11***67 | Separator Group-Water; -Primary | 1 |
9r-1325 Tank Gp-Fuel
| 16***77 | Step As | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 7X***44 | Cap-Fuel Tank Vented | 1 |
141-8288 Valve Gp-Fuel Relief
| 14***87 | Spring | 1 |
| 14***88 | Valve Group-Fuel Relief | 1 |
| 2W***94 | Plunger As-Valve | 1 |
Hydraulic System
149-0686 Accumulator Gp-Hydraulic -Charged
| 14***86 | Accumulator Group-Hydraulic; -Charged | 1 |
227-8807 Accumulator Gp-Hydraulic -Uncharged
| 22***07 | Accumulator Group-Hydraulic; -Uncharged | 1 |
162-3960 Accumulator Gp-Ride Control -Charged
| 15***06 | Valve-Gas | 1 |
| 16***96 | Service Kit; (Includes Seals) | 1 |
| 16***60 | Accumulator Group-Ride Control; -Charged | 1 |
162-3961 Accumulator Gp-Ride Control -Uncharged
| 16***60 | Accumulator Group-Ride Control; -Charged | 1 |
| 16***61 | Accumulator Group-Ride Control; -Uncharged | 1 |
240-7059 Control Ar-Backhoe
| 14***08 | Plug As. | 2 |
| 18***15 | Control Group-Joystick; -Rh | 1 |
| 18***16 | Control Group-Joystick; -Lh | 1 |
240-7058 Control Ar-Backhoe
| 14***08 | Plug As. | 2 |
| 18***15 | Control Group-Joystick; -Rh | 1 |
| 18***16 | Control Group-Joystick; -Lh | 1 |
240-7060 Control Ar-Backhoe
| 14***08 | Plug As. | 2 |
| 18***15 | Control Group-Joystick; -Rh | 1 |
| 18***16 | Control Group-Joystick; -Lh | 1 |
240-7072 Control Ar-Backhoe
| 14***08 | Plug As. | 2 |
| 18***80 | Floorplate Group | 1 |
| 23***10 | Control Group-Hydraulic Hand; -4-Lever | 1 |
240-7071 Control Ar-Backhoe
| 14***08 | Plug As. | 2 |
| 18***80 | Floorplate Group | 1 |
| 23***10 | Control Group-Hydraulic Hand; -4-Lever | 1 |
240-7066 Control Ar-Backhoe
| 14***08 | Plug As. | 2 |
| 18***80 | Floorplate Group | 1 |
| 23***11 | Control Group-Hydraulic Hand; -4-Lever | 1 |
240-7070 Control Ar-Backhoe
| 14***08 | Plug As. | 2 |
| 18***80 | Floorplate Group | 1 |
| 23***10 | Control Group-Hydraulic Hand; -4-Lever | 1 |
240-7067 Control Ar-Backhoe
| 14***08 | Plug As. | 2 |
| 18***80 | Floorplate Group | 1 |
| 23***11 | Control Group-Hydraulic Hand; -4-Lever | 1 |
240-7065 Control Ar-Backhoe
| 14***08 | Plug As. | 2 |
| 18***80 | Floorplate Group | 1 |
| 23***11 | Control Group-Hydraulic Hand; -4-Lever | 1 |
240-7075 Control Ar-Ride
| 18***12 | Wiring Group-Ride Control; -Autoshift | 1 |
| 24***27 | Lines Group-Ride Control | 1 |
| 24***75 | Control Ar-Ride | 1 |
241-0670 Control Gp-Ride -Kit
| 18***12 | Wiring Group-Ride Control; -Autoshift | 1 |
| 24***27 | Lines Group-Ride Control | 1 |
| 24***70 | Control Group-Ride; -Kit | 1 |
7w-8751 Cooler Gp-Hydraulic Oil
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 4 |
| 5P***16 | Washer; (Hard) (8.8x20.5x2mm Thk) | 10 |
| 7W***51 | Cooler Group-Hydraulic Oil | 1 |
9r-3196 Cylinder & Seal Gp-Boom
| 11***11 | Cylinder Group-Boom | 1 |
| 14***20 | Connector As | 1 |
| 14***89 | Elbow As | 1 |
9r-3197 Cylinder & Seal Gp-Stick
| 11***13 | Cylinder Group-Stick | 1 |
| 14***20 | Connector As | 1 |
| 14***89 | Elbow As | 1 |
240-7056 Cylinder & Seal Gp-Bucket -Standard Stick-Backhoe
| 24***29 | Cylinder Group-Backhoe Bucket | 1 |
| 24***56 | Cylinder & Seal Group-Bucket; -Standard Stick-Backhoe | 1 |
| 3B***88 | Fitting-Grease; (Ejector Guide Rollers) | 1 |
240-6030 Cylinder & Seal Gp-Bucket
| 16***44 | Piston | 1 |
| 16***07 | Seal As-Buffer | 1 |
| 16***17 | Seal-U-Cup | 1 |
242-4278 Cylinder & Seal Gp-Stick -Extendable
| 16***90 | Seal As-Buffer | 1 |
| 16***00 | Seal-U-Cup | 1 |
| 17***79 | Bolt-Hex Head; (M24x3.0x80mm) | 1 |
240-6029 Cylinder Gp-Backhoe Bucket
| 16***41 | Piston | 1 |
| 16***07 | Seal As-Buffer | 1 |
| 16***17 | Seal-U-Cup | 1 |
111-8211 Cylinder Gp-Boom
| 11***11 | Cylinder Group-Boom | 1 |
| 11***12 | Cylinder As | 1 |
| 12***78 | Head | 1 |
242-9893 Cylinder Gp-Hydraulic
| 11***26 | Plug-O-Ring | 2 |
| 17***65 | Piston | 1 |
| 24***81 | Kit-Seal | 1 |
125-7895 Cylinder Gp-Lift
| 11***37 | Head | 1 |
| 12***95 | Cylinder Group-Lift | 1 |
| 12***96 | Cylinder As | 1 |
6q-2195 Cylinder Gp-Multipurpose Bukt
| 6Q***95 | Cylinder Group-Multipurpose Bukt | 1 |
| 6Q***98 | Body-Cylinder | 1 |
| 6Q***99 | Rod As | 1 |
268-1322 Cylinder Gp-Multipurpose Bukt
| 26***22 | Cylinder Group-Multipurpose Bukt | 1 |
| 27***50 | Bearing-Sleeve | 2 |
| 27***29 | Kit-Seal | 0 |
226-5540 Cylinder Gp-Multipurpose Bukt
| 22***40 | Cylinder Group-Multipurpose Bukt | 1 |
| 23***57 | Kit-Seal; (Bucket Cylinder) | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 2 |
197-8083 Cylinder Gp-Stabilizer
| 13***02 | Cylinder As; (Lh) | 1 |
| 16***01 | Seal As-Buffer | 1 |
| 16***12 | Seal-U-Cup | 1 |
197-8079 Cylinder Gp-Stabilizer
| 13***03 | Cylinder As; (Rh) | 1 |
| 16***01 | Seal As-Buffer | 1 |
| 16***12 | Seal-U-Cup | 1 |
111-8213 Cylinder Gp-Stick
| 11***13 | Cylinder Group-Stick | 1 |
| 11***15 | Cylinder As | 1 |
| 16***19 | Seal-U-Cup | 1 |
251-4296 Cylinder Gp-Swing
| 10***82 | Washer; (11x19.5x2.5-mm Thk) | 1 |
| 23***83 | Piston | 1 |
| 23***85 | Seal As | 1 |
169-9531 Cylinder Gp-Swing
| 10***82 | Washer; (11x19.5x2.5-mm Thk) | 1 |
| 11***70 | Rod As | 1 |
| 11***73 | Piston | 1 |
100-7844 Cylinder Gp-Tilt
| 10***44 | Cylinder Group-Tilt | 1 |
| 10***46 | Rod As | 1 |
| 10***22 | Cylinder As | 1 |
115-6851 Drive & Mtg Gp-Pump
| 10***26 | Bolt; (M24x19.1-mm) | 8 |
| 11***67 | Plate As | 1 |
| 11***68 | Plate As | 1 |
250-4470 Fastener Gp-Valve
| 25***70 | Fastener Group-Valve | 1 |
| 7X***71 | Bolt; (M10x1.5x45-mm) | 5 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 7 |
224-6812 Filter Gp-Oil
| 12***17 | Filter-Oil; (Ultra High Efficiency)(Hydraulic, Transmission) | 1 |
| 13***14 | Filter As-Hydraulic; (Steering)(Fire Resistant Fluid) | 1 |
| 22***12 | Filter Group-Oil; -Torque Converter | 1 |
240-0070 Hydraulic Ar
| 10***44 | Cylinder Group-Tilt | 1 |
| 11***10 | Lines Group-Steering | 1 |
| 11***51 | Drive & Mtg Group-Pump | 1 |
290-3935 Hydraulic Ar
| 16***63 | Boot | 1 |
| 24***77 | Valve Group-Bank 2 | 1 |
| 29***35 | Hydraulic Ar | 1 |
240-0085 Hydraulic Ar
| 16***64 | Boot | 1 |
| 24***85 | Hydraulic Ar | 1 |
| 24***93 | Control Group-Hydraulic Hand; -Loader | 1 |
9r-2236 Kickout & Positioner Gp
| 1B***16 | Key-Woodruff | 1 |
| 29***27 | Plate | 1 |
| 2D***79 | Washer; (18.24x25.4x3.4-mm Thk) | 1 |
4t-1022 Lever Gp-Control Valve
| 4T***98 | Lever | 1 |
| 4T***22 | Lever Group; -Ripper Lift-Ripper Tilt-Blade Tilt | 1 |
| 4T***91 | Housing | 1 |
105-4670 Lines Gp-Backhoe Auxiliary
| 10***63 | Film-Instruction; (Return Flow)(Return Flow Direction) | 2 |
| 10***70 | Lines Group-Backhoe Auxiliary | 1 |
| 10***04 | Hose As | 1 |
105-4671 Lines Gp-Backhoe Auxiliary
| 10***63 | Film-Instruction; (Return Flow)(Return Flow Direction) | 2 |
| 10***71 | Lines Group-Backhoe Auxiliary | 1 |
| 10***04 | Hose As | 1 |
9r-4711 Lines Gp-Boom
| 14***41 | Connector Group | 1 |
| 14***82 | Elbow As | 1 |
| 15***72 | Plug As | 2 |
9r-1353 Lines Gp-Boom
| 14***27 | Connector Group | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 2 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 2 |
272-1746 Lines Gp-Bucket
| 12***04 | Clamp | 10 |
| 14***37 | Hose As | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
9r-1368 Lines Gp-Loader Auxiliary
| 14***41 | Connector Group | 2 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 2 |
| 6V***86 | Clip (Tab) | 2 |
268-5603 Lines Gp-Bucket
| 11***46 | Hose Assem. | 1 |
| 14***13 | Hose As | 2 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
9r-1355 Lines Gp-Bucket
| 14***17 | Adapter, -12 Orb / -16 Orfs | 1 |
| 14***35 | Connect Group; (Each Includes) | 1 |
| 14***62 | Elbow Group | 1 |
9r-1358 Lines Gp-Extendable Stick
| 12***10 | Tube As | 1 |
| 12***11 | Tube As | 1 |
| 12***36 | Hose As | 2 |
247-2645 Lines Gp-Extendable Stick
| 14***15 | Connector As | 1 |
| 14***90 | Elbow Group | 1 |
| 24***44 | Tube As | 1 |
9r-2280 Lines Gp-Backhoe
| 18***13 | Tube As | 1 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 6 |
| 6V***46 | Seal-O-Ring | 5 |
240-2607 Lines Gp-Lift Cylinder
| 14***22 | Adapter; (-10orb/-12orfs) | 2 |
| 14***27 | Connector Group | 2 |
| 14***88 | Elbow Group | 2 |
240-6021 Lines Gp-Pilot -Stabilizer
| 11***49 | Fitting As; (Quick Disconnect) | 1 |
| 13***13 | Band; (Marker) (Gray, P) | 2 |
| 14***25 | Connector As. | 2 |
240-6022 Lines Gp-Pilot
| 10***96 | Clip | 2 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 13***13 | Band; (Marker) (Gray, P) | 4 |
249-3728 Lines Gp-Pilot
| 11***49 | Fitting As; (Quick Disconnect) | 1 |
| 13***13 | Band; (Marker) (Gray, P) | 2 |
| 14***25 | Connector As. | 2 |
240-2611 Lines Gp-Pump
| 11***39 | Hose As | 1 |
| 11***54 | Tube As | 1 |
| 12***21 | Hose As | 1 |
240-6027 Lines Gp-Ride Control
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***33 | Clip; (Slot) | 2 |
| 10***34 | Clip; (Tab) | 2 |
240-2609 Lines Gp-Stabilizer
| 13***57 | Tube As; (Lh) | 1 |
| 13***58 | Tube As; (Rh) | 1 |
| 14***18 | Connector As | 4 |
9r-1354 Lines Gp-Stick
| 14***27 | Connector Group | 2 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 2 |
| 5P***60 | Clamp-Hose | 1 |
240-2604 Lines Gp-Swing
| 10***59 | Cartridge | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 4 |
| 14***41 | Connector Group | 1 |
9r-1367 Lines Gp-Tilt Cylinder
| 2M***80 | Seal--To Connector Pump Outlet | 2 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 2 |
| 6V***86 | Clip (Tab) | 6 |
9t-3257 Manifold Gp-Control
| 15***24 | Hex Head Plug; (-4sae) (D6r Iii) | 3 |
| 1P***77 | Flange-Half (For Tilt Ports On Valve) | 2 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
190-8315 Manifold Gp-Ride Control
| 14***46 | Kit-Seal; (Valve) | 1 |
| 16***69 | Orifice As | 2 |
| 17***75 | Valve Group-Solenoid | 1 |
240-5969 Pump Gp-Piston
| 00***40 | Cone-Roller Bearing | 1 |
| 00***63 | Ring | 1 |
| 03***36 | Seal-O-Ring | 1 |
240-2612 Pump Gp-Piston & Vane
| 10***55 | Pump Group-Vane | 1 |
| 24***12 | Pump Group-Piston & Vane | 1 |
| 24***69 | Pump Group-Piston | 1 |
105-2155 Pump Gp-Vane
| 00***62 | Seal-O-Ring; (63.17mm Id) | 2 |
| 07***56 | Shaft | 1 |
| 09***43 | Body | 1 |
105-2154 Rotating Gp-Pump
| 00***69 | Ring | 1 |
| 10***23 | Plate-Retaining | 1 |
| 10***54 | Rotating Group-Pump; -Impl, Steering, Pilot, Brake | 1 |
209-4165 Stabilizer Ar -With Alarm, Auto Up
| 18***00 | Valve Group-Pilot; -Stabilizer | 1 |
| 18***07 | Wiring Group-Stabilizer Alarm; -Warning | 1 |
| 18***08 | Wiring Group-Stabilizer; -Auto Up | 1 |
9r-2294 Tank & Filter Gp-Hydraulic
| 19***55 | Tank Group-Hydraulic | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 3G***61 | Gasket | 1 |
197-4955 Tank Gp-Hydraulic
| 19***54 | Cap Group-Hydraulic Oil Filler | 1 |
| 19***55 | Tank Group-Hydraulic | 1 |
| 2D***02 | Plate | 1 |
233-7132 Valve & Mtg Gp-Solenoid
| 09***68 | Bolt-Socket Head; (M5x0.8x8-mm) | 2 |
| 22***98 | Valve Group-Solenoid | 1 |
| 23***32 | Valve & Mtg Group-Solenoid; -12-Vdc-Hydraulic Lockout, Work Tool Psnr | 1 |
220-3392 Valve & Mtg Gp-Solenoid
| 14***03 | Grommet | 1 |
| 19***15 | Valve Group-Solenoid; (Transfer Gear Output Mode) | 1 |
| 20***71 | Kit-Seal; (Solenoid Valve) | 1 |
243-2266 Valve & Mtg Gp-Solenoid -Ride Control
| 14***88 | Kit-Seal; (Ride Control, Switch) | 1 |
| 22***09 | Kit-Seal; (Accumulator) | 1 |
| 23***28 | Coil As | 2 |
9t-3682 Valve Gp-Accumulator Charging
| 9T***82 | Valve Group-Accumulator Charging | 1 |
240-5977 Valve Gp-Bank 2
| 24***77 | Valve Group-Bank 2 | 1 |
| 24***55 | Valve Group-Control; -Tilt | 1 |
| 24***59 | Valve Group-Control; -Lift | 1 |
240-5978 Valve Gp-Bank 3
| 24***78 | Valve Group-Bank 3 | 1 |
| 24***55 | Valve Group-Control; -Tilt | 1 |
| 24***58 | Valve Group-Control; -Bucket | 1 |
240-6800 Valve Gp-Bank 3
| 11***73 | Valve Group-Control; -Boom | 1 |
| 11***75 | Valve Group-Control; -Bucket | 1 |
| 18***63 | Plug Group | 4 |
236-1740 Valve Gp-Bank 3
| 18***63 | Plug Group | 4 |
| 1P***78 | Flange; (To 5v***09 Tube Assembly) | 2 |
| 1P***60 | Flange-Tube Assembly To Tube Assembly | 16 |
239-1437 Valve Gp-Bank 4
| 23***37 | Valve Group-Bank 4 | 1 |
| 24***37 | Valve Group-Control; -Stabilizer | 2 |
| 24***38 | Valve Group-Control; -Swing | 1 |
240-5982 Valve Gp-Bank 4
| 10***17 | Stud; (3/8-16-Thd) | 3 |
| 24***82 | Valve Group-Bank 4 | 1 |
| 24***37 | Valve Group-Control; -Stabilizer | 2 |
240-5984 Valve Gp-Bank 5
| 10***17 | Stud; (3/8-16-Thd) | 3 |
| 24***84 | Valve Group-Bank 5 | 1 |
| 24***37 | Valve Group-Control; -Stabilizer | 2 |
239-1436 Valve Gp-Bank 5
| 10***17 | Stud; (3/8-16-Thd) | 3 |
| 23***36 | Valve Group-Bank 5 | 1 |
| 24***37 | Valve Group-Control; -Stabilizer | 2 |
165-7948 Valve Gp-Check
| 16***48 | Valve Group-Check; -Pilot Lines | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 4J***77 | Seal - O - Ring (11.23mm Od) | 1 |
4t-5896 Valve Gp-Check
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 4T***71 | Ring-Back-Up | 1 |
| 4T***96 | Valve Group-Check; -Pressure Reducing | 1 |
246-1604 Valve Gp-Check
| 13***77 | Valve Group-Check | 1 |
| 15***70 | Valve Group-Check | 1 |
| 24***04 | Valve Group-Check | 1 |
116-1890 Valve Gp-Check & Relief
| 11***90 | Valve Group-Check & Relief; -Line, Stick | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
116-1889 Valve Gp-Check & Relief
| 11***89 | Valve Group-Check & Relief | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
243-3160 Valve Gp-Control -Auxiliary
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 2 |
| 03***85 | Bolt 5t***57 Plate As To Fuel Pump Group | 1 |
| 12***76 | Seat As-Shuttle | 1 |
243-3158 Valve Gp-Control -Bucket
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 2 |
| 03***85 | Bolt 5t***57 Plate As To Fuel Pump Group | 1 |
| 12***76 | Seat As-Shuttle | 1 |
240-6799 Valve Gp-Control -Stick
| 10***10 | Valve-Check; (Steering) | 1 |
| 10***11 | Plug; (5/16-12 Thd) | 1 |
| 11***90 | Valve Group-Check & Relief; -Line, Stick | 2 |
236-1737 Valve Gp-Control -Bucket
| 10***10 | Valve-Check; (Steering) | 1 |
| 10***11 | Plug; (5/16-12 Thd) | 1 |
| 11***90 | Valve Group-Check & Relief; -Line, Stick | 2 |
242-9737 Valve Gp-Control -Stabilizer
| 00***37 | Seal-O-Ring | 2 |
| 11***72 | Coupling | 1 |
| 11***73 | Coupling | 1 |
116-2075 Valve Gp-Control -Bucket
| 10***10 | Valve-Check; (Steering) | 1 |
| 10***11 | Plug; (5/16-12 Thd) | 1 |
| 11***90 | Valve Group-Check & Relief; -Line, Stick | 2 |
242-9739 Valve Gp-Control -Swing
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 2 |
| 0S***14 | Bolt (.25" Diameter-.50" Long) | 1 |
| 12***76 | Seat As-Shuttle | 1 |
241-8255 Valve Gp-Control -Tilt
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 2 |
| 12***76 | Seat As-Shuttle | 1 |
| 12***96 | Valve Group-Check; (Primary Resolver) | 1 |
116-2073 Valve Gp-Control -Boom
| 10***10 | Valve-Check; (Steering) | 1 |
| 10***11 | Plug; (5/16-12 Thd) | 1 |
| 11***89 | Valve Group-Check & Relief | 1 |
243-3159 Valve Gp-Control -Lift
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 2 |
| 10***63 | Spacer-Detent | 1 |
| 10***64 | Spring | 1 |
236-1738 Valve Gp-Control -Boom
| 10***10 | Valve-Check; (Steering) | 1 |
| 10***11 | Plug; (5/16-12 Thd) | 1 |
| 11***89 | Valve Group-Check & Relief | 1 |
242-9738 Valve Gp-Control -Swing
| 00***37 | Seal-O-Ring | 2 |
| 11***72 | Coupling | 1 |
| 11***73 | Coupling | 1 |
236-1736 Valve Gp-Control -Stick
| 10***10 | Valve-Check; (Steering) | 1 |
| 10***11 | Plug; (5/16-12 Thd) | 1 |
| 11***90 | Valve Group-Check & Relief; -Line, Stick | 2 |
185-5900 Valve Gp-Pilot -Stabilizer
| 17***41 | Nut; (M8x6.5-mm) | 2 |
| 18***00 | Valve Group-Pilot; -Stabilizer | 1 |
| 19***15 | Kit-Seal; (Pilot Valve) | 1 |
198-6556 Valve Gp-Pilot
| 11***81 | Plate | 1 |
| 15***66 | Kit-Spring; (Pilot Valve) | 1 |
| 19***98 | Boot | 1 |
198-6555 Valve Gp-Pilot
| 11***81 | Plate | 1 |
| 15***66 | Kit-Spring; (Pilot Valve) | 1 |
| 19***98 | Boot | 1 |
105-2149 Valve Gp-Pump Control
| 03***36 | Seal-O-Ring | 1 |
| 10***49 | Valve Group-Pump Control | 1 |
| 11***33 | Spring | 1 |
116-6666 Valve Gp-Pump Control
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 03***36 | Seal-O-Ring | 1 |
| 11***66 | Valve Group-Pump Control | 1 |
116-1895 Valve Gp-Relief
| 11***95 | Valve Group-Relief; -Ripper Tilt | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
| 4K***88 | Seal; Adapter To Oil Pump Outlet Manifold | 1 |
243-0776 Valve Gp-Relief
| 24***76 | Valve Group-Relief | 1 |
| 4K***88 | Seal; Adapter To Oil Pump Outlet Manifold | 1 |
| 5K***90 | Seal-To Hydraulic Cooler Inlet Port | 1 |
9t-8048 Valve Gp-Relief
| 1U***65 | Spring (Outer) | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 4T***11 | Ring-Seal | 1 |
4t-1860 Valve Gp-Shuttle
| 14***03 | Seal-O-Ring | 1 |
| 14***04 | Ring-Backup | 2 |
| 14***05 | Ring-Backup | 2 |
260-8590 Valve Gp-Shuttle
| 24***56 | Kit-Seal; (Shuttle Valve)(Implement Control) | 1 |
| 26***90 | Valve Group-Shuttle; -Implement Pilot Oil | 1 |
| 3H***42 | Seal; (Included In Seal Kit) | 1 |
214-3523 Valve Gp-Shuttle
| 12***98 | Seat | 1 |
| 12***99 | Seat | 1 |
| 13***49 | Connector | 1 |
171-8775 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***70 | Nut; (1/2-20-2b-Thd) | 2 |
| 17***72 | Valve As-Solenoid | 1 |
Implements
9r-1335 Arm Gp-Lift
| 17***25 | Washer; (67.5x120x2-mm Thk) | 3 |
| 17***26 | Washer; (67.5x120x3-mm Thk) | 2 |
| 3B***88 | Fitting-Grease; (Ejector Guide Rollers) | 2 |
241-4966 Backhoe Gp-Extendable Stick -Extendable Stick
| 17***61 | Plug-Protective | 1 |
| 23***86 | Boom As | 1 |
| 24***66 | Backhoe Group-Extendable Stick; -Extendable Stick | 1 |
241-9389 Backhoe Gp-Extendable Stick
| 10***21 | Boss-Threaded; (M12x1.75-Thd) | 2 |
| 10***01 | Plate As | 1 |
| 17***61 | Plug-Protective | 1 |
241-3540 Backhoe Gp-Standard Stick
| 10***21 | Boss-Threaded; (M12x1.75-Thd) | 2 |
| 10***11 | Block | 2 |
| 10***19 | Stick As | 1 |
241-9388 Backhoe Gp-Standard Stick
| 10***21 | Boss-Threaded; (M12x1.75-Thd) | 2 |
| 10***01 | Plate As | 1 |
| 10***11 | Block | 2 |
9r-1336 Brace Gp-Lift Cylinder
| 32***20 | Brace As | 1 |
| 5P***70 | Pin (Lock) | 1 |
| 9R***36 | Brace Group-Lift Cylinder | 1 |
239-3225 Linkage Gp-Backhoe Bucket -Standard Stick
| 23***25 | Linkage Group-Backhoe Bucket; -Standard Stick | 1 |
| 23***26 | Guide As | 1 |
| 23***48 | Guide As | 1 |
240-7634 Linkage Gp-Backhoe Bucket
| 24***34 | Linkage Group-Backhoe Bucket | 1 |
| 24***29 | Film-Instruction; (Link) | 1 |
| 24***57 | Guide As; (Lh) | 1 |
9r-1337 Linkage Gp-Loader Bucket
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 6 |
| 6F***61 | Dowel | 1 |
| 6V***64 | Ring-Retaining | 3 |
240-0061 Lock Gp-Transport -Cable Control
| 09***35 | Spacer; (11x25x20-mm Thk) | 1 |
| 13***76 | Bracket As | 1 |
| 13***43 | Cable | 1 |
245-1083 Lock Gp-Transport
| 10***89 | Bolt; (M8x1.25x130-mm) | 2 |
| 16***95 | Knob | 1 |
| 18***51 | Bracket As | 1 |
239-9508 Mounting Gp-Backhoe -Standard Stick
| 23***08 | Mounting Group-Backhoe; -Standard Stick | 1 |
| 3B***26 | Pin-Cotter | 4 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 2 |
112-4431 Mounting Gp-Backhoe
| 09***28 | Ring-Retaining; (External) | 2 |
| 11***31 | Mounting Group-Backhoe | 1 |
| 2K***49 | Pin-Spring | 1 |
241-0684 Stabilizer Gp-Backhoe -Without Rock Guard
| 13***29 | Pad As-Stabilizer | 2 |
| 13***47 | Pin | 2 |
| 14***91 | Latch | 4 |
241-0683 Stabilizer Gp-Backhoe -With Rock Guard
| 13***29 | Pad As-Stabilizer | 2 |
| 13***59 | Guard As | 2 |
| 13***47 | Pin | 2 |
241-5820 Stick Gp-Extendable
| 24***50 | Stick Group-Extendable | 1 |
| 24***20 | Stick Group-Extendable | 1 |
| 24***78 | Cylinder & Seal Group-Stick; -Extendable | 1 |
241-4750 Stick Gp-Extendable
| 10***11 | Block | 2 |
| 11***54 | Shim; (1-mm Thk)(Round) | 4 |
| 18***26 | Pad As | 1 |
Lubrication System
1n-3477 Breather Gp -Crankcase
| 1N***77 | Breather Group; Breather Group | 1 |
| 2W***62 | Breather As-Crankcase; (Engine) | 1 |
| 5N***85 | Washer-Sealing; (Sealing) | 1 |
7w-8798 Filler Gp-Engine Oil
| 13***19 | Seal-Integral; (Integral) | 1 |
| 5L***52 | Cap Assembly, Including:-; (Engine) | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 4 |
7c-0896 Filter Gp-Engine Oil
| 1R***14 | Filter As-Engine Oil | 1 |
| 24***64 | Spring; (Yoke) | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
7w-8420 Fumes Disposal Gp
| 4D***88 | Clip-(Slot To Fit Fastener M10 Or 3/8) | 1 |
| 6V***18 | Bolt (M8x1.25x50mm); (M8x1.25x50-mm) | 1 |
| 7C***52 | Hose-Disposal; (Fumes)(Fumes) | 1 |
7w-8796 Gauge Gp-Oil Level (Dipstick)
| 1F***67 | Clip 7t***28 Cable As To Fan Shroud | 1 |
| 1S***63 | Plug; (Mounted-Bottom | 3 |
| 7C***07 | Gauge-Oil Level (Dipstick) | 1 |
7c-0897 Lines Gp-Engine Oil
| 3P***56 | Seal-O-Ring; (21.82mm Id) | 2 |
| 4W***59 | Tube Assem. | 1 |
| 6V***40 | Bolt (M8x1.25x25mm); (M8x1.25x25-mm) | 5 |
1w-8899 Lines Gp-Turbocharger Oil
| 11***42 | Adapter | 1 |
| 14***28 | Tube As | 1 |
| 14***33 | Tube As | 1 |
119-2925 Pump Gp-Engine Oil
| 10***05 | Spring | 1 |
| 11***25 | Pump Group-Engine Oil | 1 |
| 2W***78 | Plunger-Relief | 1 |
7e-2971 Pump Gp-Engine Oil
| 11***25 | Pump Group-Engine Oil | 1 |
| 6V***39 | Washer-Hard-Alt Strap To Fan Drive Belt | 2 |
| 7E***71 | Pump Group-Engine Oil; Engine Oil Pump Group | 1 |
Machine Arrangement
240-7640 Backhoe Ar-Extendable Stick
| 10***70 | Lines Group-Backhoe Auxiliary | 1 |
| 11***31 | Mounting Group-Backhoe | 1 |
| 24***30 | Cylinder & Seal Group-Bucket | 1 |
240-7639 Backhoe Ar-Extendable Stick
| 11***31 | Mounting Group-Backhoe | 1 |
| 24***30 | Cylinder & Seal Group-Bucket | 1 |
| 24***34 | Linkage Group-Backhoe Bucket | 1 |
240-7637 Backhoe Ar-Standard Stick
| 10***71 | Lines Group-Backhoe Auxiliary | 1 |
| 23***25 | Linkage Group-Backhoe Bucket; -Standard Stick | 1 |
| 23***08 | Mounting Group-Backhoe; -Standard Stick | 1 |
240-7636 Backhoe Ar-Standard Stick
| 23***25 | Linkage Group-Backhoe Bucket; -Standard Stick | 1 |
| 23***08 | Mounting Group-Backhoe; -Standard Stick | 1 |
| 24***56 | Cylinder & Seal Group-Bucket; -Standard Stick-Backhoe | 1 |
240-7638 Backhoe Ar-Standard Stick
| 23***25 | Linkage Group-Backhoe Bucket; -Standard Stick | 1 |
| 23***08 | Mounting Group-Backhoe; -Standard Stick | 1 |
| 24***56 | Cylinder & Seal Group-Bucket; -Standard Stick-Backhoe | 1 |
240-0060 Chassis Ar
| 15***69 | Knob Group-Steering | 1 |
| 18***01 | Indicator Group-Air Filter Change; -Electric | 1 |
| 18***00 | Wiring Group-Platform | 1 |
240-0054 Common Ar
| 10***43 | Installation Ar-Engine | 1 |
| 13***42 | Engine Ar | 1 |
| 24***54 | Common Ar | 1 |
9r-1214 Loader Ar
| 9R***14 | Loader Ar | 1 |
| 9R***35 | Arm Group-Lift | 1 |
| 9R***36 | Brace Group-Lift Cylinder | 1 |
Operator Station
186-6190 Accumulator Gp-Refrigerant -With Desiccant
| 18***90 | Accumulator Group-Refrigerant; -With Desiccant | 1 |
236-6966 Air Conditioner & Mounting Gp
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 8 |
| 11***09 | Knob-Control | 1 |
| 12***12 | Screw-Pan Head; (8-16x0.32-In) | 2 |
164-1032 Air Conditioner & Mounting Gp
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 8 |
| 11***09 | Knob-Control | 1 |
| 12***12 | Screw-Pan Head; (8-16x0.32-In) | 2 |
170-0075 Air Conditioner Gp
| 11***31 | Switch-Temperature; (Air Conditioner) | 1 |
| 12***78 | Locknut; (M6x1-Thd) | 4 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
240-0076 Cab Ar-Enclosed Rops
| 10***51 | Visor Group-Cab | 1 |
| 11***37 | Film; (Caterpillar, Sun Visor)(Windshield Sun Visor) | 1 |
| 13***12 | Pulley Group-Fan & Alt Drive | 1 |
240-0077 Cab Ar-Enclosed Rops
| 10***51 | Visor Group-Cab | 1 |
| 11***37 | Film; (Caterpillar, Sun Visor)(Windshield Sun Visor) | 1 |
| 13***12 | Pulley Group-Fan & Alt Drive | 1 |
240-0078 Cab Ar-Enclosed Rops
| 10***51 | Visor Group-Cab | 1 |
| 11***37 | Film; (Caterpillar, Sun Visor)(Windshield Sun Visor) | 1 |
| 13***10 | Pulley Group-Fan & Alt Drive | 1 |
240-0079 Cab Ar-Enclosed Rops
| 10***51 | Visor Group-Cab | 1 |
| 11***37 | Film; (Caterpillar, Sun Visor)(Windshield Sun Visor) | 1 |
| 13***10 | Pulley Group-Fan & Alt Drive | 1 |
236-4863 Cab Gp
| 10***11 | Screw-Machine; (3/8-16x0.75-In) | 2 |
| 11***14 | Pin | 2 |
| 12***56 | Bushing | 12 |
240-0073 Canopy Ar-Open Rops
| 13***12 | Pulley Group-Fan & Alt Drive | 1 |
| 16***46 | Console-Front | 1 |
| 16***48 | Fender Group-Rear | 1 |
240-0072 Canopy Ar-Open Rops
| 13***12 | Pulley Group-Fan & Alt Drive | 1 |
| 16***46 | Console-Front | 1 |
| 16***48 | Fender Group-Rear | 1 |
239-1330 Canopy Gp-Open Rops
| 16***71 | Glass; (Front, Rh) | 1 |
| 16***72 | Glass; (Front, Lh) | 1 |
| 20***21 | Film-Warning; (No Exit) | 2 |
200-2676 Compartment Gp-Literature -Storage Bag
| 20***76 | Compartment Group-Literature; -Storage Bag | 1 |
| 5P***57 | Sleeve (Not Shown) | 1 |
| 5P***58 | Sleeve; (Cable Splice) | 1 |
236-2741 Compressor & Mtg Gp-Refrig
| 10***89 | Bolt; (M8x1.25x130-mm) | 4 |
| 1P***44 | V-Belt | 1 |
| 21***02 | Compressor Group-Refrigerant | 1 |
214-4302 Compressor Gp-Refrigerant
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 21***02 | Compressor Group-Refrigerant | 1 |
| 22***96 | Seal-O-Ring | 2 |
7w-8763 Condenser Gp
| 5P***16 | Washer; (Hard) (8.8x20.5x2mm Thk) | 4 |
| 7W***21 | Core As-Condenser | 1 |
| 7W***63 | Condenser Group; Condenser & Mounting Gp | 1 |
183-4996 Console Gp-Front
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 22 |
| 14***26 | Screw-Flat Head; (6-20x0.75-In) | 4 |
| 15***15 | Louver As-Vent | 2 |
185-3524 Console Gp-Operator -Rh
| 17***83 | Locknut; (M4x0.7-Thd) | 4 |
| 18***98 | Console Group-Side; -Rh | 1 |
| 18***24 | Console Group-Operator; -Rh | 1 |
164-1388 Console Gp-Operator -With Air Conditioner, Lh
| 16***31 | Console Group-Side; -Lh-Air Conditioning | 1 |
| 16***88 | Console Group-Operator; -With Air Conditioner, Lh | 1 |
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
236-6938 Console Gp-Operator -Lh
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
| 23***77 | Duct-Air | 1 |
| 23***37 | Console Group-Side; -Lh | 1 |
185-3530 Console Gp-Operator -Rh
| 12***70 | Screw-Machine; (M6x1x40-mm) | 2 |
| 16***07 | Console-Storage | 1 |
| 17***83 | Locknut; (M4x0.7-Thd) | 4 |
164-1389 Console Gp-Operator -Lh
| 16***32 | Console Group-Side; -Lh | 1 |
| 16***89 | Console Group-Operator; -Lh | 1 |
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
236-6937 Console Gp-Side -Lh
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 8 |
| 11***03 | Louver As | 2 |
| 16***33 | Cover | 1 |
164-1132 Console Gp-Side -Lh
| 16***32 | Console Group-Side; -Lh | 1 |
| 16***33 | Cover | 1 |
| 16***34 | Pin | 1 |
183-4997 Console Gp-Side -Rh
| 16***78 | Clip | 5 |
| 17***91 | Nut-Spring | 16 |
| 18***91 | Cover Group-Console | 1 |
164-1131 Console Gp-Side -Lh
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 8 |
| 11***03 | Louver As | 2 |
| 16***31 | Console Group-Side; -Lh-Air Conditioning | 1 |
183-4998 Console Gp-Side -Rh
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 4 |
| 11***03 | Louver As | 1 |
| 16***78 | Clip | 5 |
236-2710 Control Gp-Hydraulic Hand -4-Lever
| 11***72 | Boot | 4 |
| 13***39 | Spacer; (20x40x3-mm Thk) | 4 |
| 13***40 | Shim; (1-mm Thk) | 7 |
240-0093 Control Gp-Hydraulic Hand -Loader
| 16***95 | Knob | 1 |
| 17***35 | Lock Pin | 1 |
| 18***36 | Bearing-Sleeve | 1 |
240-0071 Control Gp-Hydraulic Hand
| 09***30 | Pin, Spring | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***91 | Nut-Jam; (3/4-16-Thd) | 1 |
236-2711 Control Gp-Hydraulic Hand -4-Lever
| 11***72 | Boot | 4 |
| 13***39 | Spacer; (20x40x3-mm Thk) | 7 |
| 13***40 | Shim; (1-mm Thk) | 4 |
236-2714 Control Gp-Hydraulic Pedal -Rh
| 16***15 | Support As | 1 |
| 16***17 | Shaft As-Pedal | 1 |
| 16***27 | Seal | 1 |
236-2712 Control Gp-Hydraulic Pedal -Extendable Stick, Auxiliary
| 16***27 | Rod | 1 |
| 17***35 | Lock Pin | 2 |
| 18***91 | Pedal As; (Rh) | 1 |
236-2715 Control Gp-Hydraulic Pedal -Lh
| 10***33 | Seal | 1 |
| 16***44 | Support As | 1 |
| 16***47 | Shaft As | 1 |
236-2713 Control Gp-Hydraulic Pedal -Auxiliary
| 16***27 | Rod | 1 |
| 17***35 | Lock Pin | 2 |
| 18***86 | Shaft As | 1 |
185-5916 Control Gp-Joystick -Lh
| 12***04 | Plate | 1 |
| 15***69 | Boot | 1 |
| 18***16 | Control Group-Joystick; -Lh | 1 |
185-5915 Control Gp-Joystick -Rh
| 12***04 | Plate | 1 |
| 15***43 | Handle-Control | 1 |
| 15***69 | Boot | 1 |
183-4897 Control Gp-Steering
| 15***80 | Steering Wheel Group | 1 |
| 16***40 | Panel As | 1 |
| 18***97 | Control Group-Steering | 1 |
9r-2320 Control Gp-Hydraulic Pedal
| 12***05 | Seal | 1 |
| 6V***35 | Bolt-Self-Locking; (M10x1.5x40-mm) | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 9 |
240-0065 Cover Gp-Cab
| 24***65 | Cover Group-Cab | 1 |
| 24***19 | Plate | 1 |
| 24***20 | Plate | 1 |
183-4991 Cover Gp-Console
| 11***89 | Retainer; (Stud) | 5 |
| 16***08 | Cover | 1 |
| 16***51 | Fastener | 5 |
186-0252 Cover Gp-Firewall -Lower
| 16***37 | Cover | 1 |
| 18***52 | Cover Group-Firewall; -Lower | 1 |
| 9X***38 | Washer; (7x19x2-mm Thk) | 12 |
197-7564 Cover Gp-Post -Rh
| 12***54 | Fastener; (Loop) (22cm) (X3) | 0 |
| 12***55 | Fastener-Hook; (18-cm Each) | 0 |
| 19***30 | Cover-Post; (Rh) | 1 |
164-1061 Door Gp-Cab -Rh
| 13***87 | Screw; (M4x0.7x12-mm) | 6 |
| 14***19 | Bracket | 2 |
| 14***55 | Seal; (478-cm) | 0 |
164-1062 Door Gp-Cab -Lh
| 13***87 | Screw; (M4x0.7x12-mm) | 6 |
| 14***19 | Bracket | 2 |
| 14***55 | Seal; (478-cm) | 0 |
164-1142 Duct Gp-Air -Autoshift
| 16***44 | Duct As | 1 |
| 16***42 | Duct Group-Air; (Autoshift) | 1 |
| 18***63 | Gasket | 1 |
184-6575 Duct Gp-Cab Air -Heater
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 8 |
| 14***26 | Screw-Flat Head; (6-20x0.75-In) | 2 |
| 15***15 | Louver As-Vent | 1 |
185-3525 Fastener Gp-Operator Console -Front
| 18***25 | Fastener Group-Operator Console; -Front | 1 |
| 5P***16 | Washer; (Hard) (8.8x20.5x2mm Thk) | 4 |
| 6V***89 | Locknut; (M8x1.25-Thd) | 4 |
180-5761 Floor Mat Gp
| 18***51 | Floor Mat | 1 |
| 18***54 | Plate; (Lh) | 2 |
| 18***61 | Floor Mat Group | 1 |
236-6967 Floor Mat Gp
| 18***54 | Plate; (Lh) | 2 |
| 1H***44 | Lockwasher (Bracket To Cab) | 4 |
| 23***36 | Floor Mat | 1 |
180-5766 Floor Mat Gp
| 18***54 | Plate; (Lh) | 2 |
| 18***56 | Floor Mat | 1 |
| 18***66 | Floor Mat Group | 1 |
180-5760 Floor Mat Gp
| 18***50 | Floor Mat | 1 |
| 18***54 | Plate; (Lh) | 2 |
| 18***60 | Floor Mat Group | 1 |
180-5765 Floor Mat Gp
| 18***54 | Plate; (Lh) | 2 |
| 18***55 | Floor Mat | 1 |
| 18***65 | Floor Mat Group | 1 |
192-4018 Footrest Gp
| 19***18 | Footrest Group | 1 |
| 19***19 | Bracket As | 1 |
| 6V***43 | Locknut; (M6x1-Thd) | 2 |
164-1030 Heater & Mtg Gp-Cab
| 11***09 | Knob-Control | 1 |
| 12***12 | Screw-Pan Head; (8-16x0.32-In) | 2 |
| 13***32 | Screw; (8-18x.39 In) | 2 |
170-0076 Heater Gp-Cab
| 12***78 | Locknut; (M6x1-Thd) | 4 |
| 16***13 | Coil As-Heater | 1 |
| 16***13 | Blower Group-Cab; (Heater) | 1 |
9r-0016 Horn Gp-Electric
| 6V***90 | Screw-Machine; (M4x1.5) | 2 |
| 7T***35 | Horn As; (12-Volt) | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
183-4910 Latch Gp-Console -Backhoe
| 09***49 | Bolt; (M8x1.25x40-mm) | 1 |
| 11***02 | Knob | 1 |
| 15***83 | Washer-Hard; (8.4x35x2.5-mm Thk) | 2 |
183-3887 Lever Gp-Governor
| 12***78 | Locknut; (M6x1-Thd) | 1 |
| 16***79 | Cable As | 1 |
| 16***83 | Lever As | 1 |
164-1165 Liner Gp-Cab
| 08***77 | Lamp Group-Dome; (12-Volt) | 1 |
| 11***20 | Bolt-Socket Head; (M4x0.7x35-mm) | 8 |
| 12***46 | Speaker As-Radio | 2 |
240-0089 Lines Gp-Air Conditioner
| 09***40 | Bar | 1 |
| 10***11 | Support | 1 |
| 15***17 | Strap | 1 |
240-0090 Lines Gp-Heater
| 14***11 | Adapter Group | 1 |
| 16***65 | Elbow As | 1 |
| 24***90 | Lines Group-Heater | 1 |
251-0916 Lines Gp-Heater
| 14***11 | Adapter Group | 1 |
| 16***65 | Elbow As | 1 |
| 25***16 | Lines Group-Heater | 1 |
164-1155 Mirror Gp-Rear View
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 16***55 | Mirror Group-Rear View | 1 |
| 19***29 | Mirror As | 1 |
144-9931 Module Gp-Warning Indicator -Without Alarm
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 14***31 | Module Group-Warning Indicator; -Without Alarm | 1 |
| 14***34 | Gasket; (Indicator Module) | 1 |
186-2589 Motor Gp-Window Wiper -Front
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 15***91 | Motor Group-Window Wiper; (Front) | 1 |
| 18***89 | Motor Group-Window Wiper; -Front | 1 |
202-5919 Mounting Gp-Backhoe Control -Pilot
| 11***60 | Strap | 2 |
| 11***27 | Screw-Machine; (M6x1x30-mm) | 4 |
| 12***99 | Rivet | 8 |
240-0092 Mounting Gp-Instrument Panel
| 16***78 | Plate | 2 |
| 24***92 | Mounting Group-Instrument Panel | 1 |
| 24***90 | Panel As | 1 |
202-5724 Mounting Gp-Instrument Panel -Rotating Vandalism Guard
| 13***40 | Locknut; (M8x1.25-Thd) | 2 |
| 16***22 | Body | 1 |
| 16***23 | Bezel | 1 |
209-4163 Mounting Gp-Stabilizer Control
| 16***98 | Knob | 2 |
| 20***27 | Film; (Stabilizer Control, Boom Lock)(Center Pivot/Boom Lock) | 1 |
| 20***98 | Plate | 1 |
243-0059 Pedal Gp-Governor
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 4 |
| 12***78 | Locknut; (M6x1-Thd) | 1 |
| 16***54 | Kit-Service; (Pedal) | 1 |
190-8918 Seat Belt Gp -Retractable, 2-In
| 19***18 | Seat Belt Group; -Retractable, 2-In | 1 |
| 19***25 | Washer-Hard; (13.5x18x4-mm Thk) | 1 |
| 3E***04 | Bolt; (M12x1.75x45-mm) | 1 |
190-8919 Seat Belt Gp -Retractable, 3-In
| 19***19 | Seat Belt Group; -Retractable, 3-In | 1 |
| 19***25 | Washer-Hard; (13.5x18x4-mm Thk) | 1 |
| 3E***04 | Bolt; (M12x1.75x45-mm) | 1 |
273-5905 Seat Gp -Vinyl
| 10***81 | Bolt-Socket Head; (M8x1.25x20-mm) | 2 |
| 12***80 | Locknut; (M12x1.75-Thd) | 2 |
| 16***83 | Washer; (19.8x31.8x1.6-mm Thk) | 3 |
164-1210 Seat Gp -Vinyl
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
| 10***81 | Bolt-Socket Head; (M8x1.25x20-mm) | 2 |
| 12***80 | Locknut; (M12x1.75-Thd) | 2 |
164-1213 Seat Gp -Deluxe, Cloth
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 4 |
| 09***78 | Pin-Spring | 2 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
164-1202 Seat Gp-Suspension -Vinyl
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 4 |
| 09***78 | Pin-Spring | 2 |
| 12***77 | Shaft-Pivot | 1 |
206-1796 Seat Gp-Suspension -Deluxe, Cloth
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
| 16***47 | Bracket As; (Rh) | 1 |
| 16***61 | Bracket As; (Lh) | 1 |
180-5772 Seat Gp-Suspension -Deluxe, Cloth
| 16***03 | Seat Group-Suspension; -Deluxe, Cloth | 1 |
| 18***72 | Seat Group-Suspension; -Deluxe, Cloth | 1 |
| 20***96 | Seat Group-Suspension; -Deluxe, Cloth | 1 |
180-5771 Seat Gp-Suspension -Standard, Vinyl
| 18***71 | Seat Group-Suspension; -Standard, Vinyl | 1 |
| 20***91 | Seat Group-Suspension; -Vinyl | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 1 |
164-1203 Seat Gp-Suspension -Deluxe, Cloth
| 14***45 | Kit-Slider Block; (Suspension Seat) | 2 |
| 16***89 | Block-Slider | 2 |
| 16***44 | Kit-Slider Block; (Includes Blocks And Setscrew) | 1 |
273-6037 Seat Gp-Suspension -Deluxe, Cloth
| 10***03 | Fastener | 3 |
| 10***81 | Bolt-Socket Head; (M8x1.25x20-mm) | 2 |
| 11***42 | Fastener | 3 |
206-1791 Seat Gp-Suspension -Vinyl
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
| 16***47 | Bracket As; (Rh) | 1 |
| 16***61 | Bracket As; (Lh) | 1 |
164-1207 Suspension Gp-Seat
| 11***42 | Fastener | 34 |
| 12***80 | Locknut; (M12x1.75-Thd) | 1 |
| 13***43 | Screw-Button Head; (3/8-16x0.625-In) | 1 |
273-6372 Suspension Gp-Seat
| 09***82 | Nut Self-Locking; (M8x1.25 Thd) | 2 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 11***42 | Fastener | 34 |
164-1370 Trim Gp-Cab
| 16***10 | Cover; (Parking Brake) | 1 |
| 16***70 | Trim Group-Cab | 1 |
| 16***74 | Brush As | 1 |
108-8251 Visor Gp-Cab
| 10***51 | Visor Group-Cab | 1 |
| 8T***71 | Capscrew; (Hex Hd) (M6 X 1.00 X 12mm, G10.9, Z) | 4 |
| 9R***03 | Plate | 2 |
167-8187 Washer Gp-Window
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***50 | Plate | 1 |
| 11***77 | Receptacle As | 2 |
164-1060 Window Gp-Cab -Lh
| 10***08 | Handle; (Rh) | 1 |
| 12***42 | Retainer; (Mount) | 6 |
| 12***45 | Washer; (13x40x3-mm Thk) | 8 |
164-1059 Window Gp-Cab -Rh
| 10***08 | Handle; (Rh) | 1 |
| 12***42 | Retainer; (Mount) | 6 |
| 12***45 | Washer; (13x40x3-mm Thk) | 8 |
164-1325 Window Gp-Cab -Rear
| 11***02 | Knob | 2 |
| 11***49 | Cap | 2 |
| 12***43 | Seal | 1 |
164-1074 Window Gp-Door -Lh
| 10***08 | Handle; (Rh) | 1 |
| 12***42 | Retainer; (Mount) | 5 |
| 12***43 | Spacer; (16-mm Thk) | 2 |
164-1073 Window Gp-Door -Rh
| 10***08 | Handle; (Rh) | 1 |
| 12***42 | Retainer; (Mount) | 5 |
| 12***43 | Spacer; (16-mm Thk) | 2 |
174-2024 Wiper Gp-Window
| 10***45 | Blade As-Wiper; (600-mm) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 13***49 | Spacer; (7.4x12.7x24-mm Thk)(12.7mm Dia) | 2 |
Power Train
6d-0337 Valve Gp-Tire
| 2D***28 | Core-Valve | 1 |
| 2D***29 | Grommet | 1 |
| 2D***30 | Washer-Ring | 1 |
120-6885 Axle & Mtg Gp-Drive & Steering -Front
| 05***90 | Vent | 1 |
| 12***85 | Axle & Mtg Group-Drive & Steering; -Front | 1 |
| 14***20 | Connector As | 2 |
112-6761 Axle & Transmission Ar
| 11***61 | Axle & Transmission Ar | 1 |
| 18***40 | Transmission Ar-Power Shift | 1 |
| 9R***10 | Axle Group-Front | 1 |
9r-3033 Axle Gp-Rear
| 05***44 | Rod-Brake Control | 2 |
| 05***55 | Pin-Pivot | 2 |
| 05***56 | Link-Plain | 2 |
184-1109 Axle Gp-Drive & Steering -Front
| 00***02 | Cone-Roller Bearing | 4 |
| 05***49 | Seal-O-Ring | 2 |
| 09***24 | Ring-Retaining | 8 |
9r-2273 Axle & Mtg Gp-Rear
| 5F***34 | Valve As-Vent; (Governor Air Compressor) | 1 |
| 6V***37 | Plain Washer - Hardened | 16 |
| 7X***51 | Nut-Hard; (M24 X 3.0) | 8 |
9r-6574 Carrier As
| 4B***70 | Cone-Bearing | 1 |
| 9R***74 | Carrier As | 1 |
| 9R***77 | Washer | 6 |
236-2678 Control Gp-Differential Lock
| 10***67 | Spring | 1 |
| 18***98 | Stud; (M10x1.5x55-mm) | 1 |
| 23***78 | Control Group-Differential Lock | 1 |
185-8844 Drive Gp-Flexible Coupling
| 13***83 | Bolt-12 Point Head; (M10x1.5x30-mm) | 8 |
| 13***93 | Plate | 1 |
| 13***95 | Plate As | 1 |
9r-1346 Filler Gp-Power Train Oil
| 18***08 | Tube As | 1 |
| 20***55 | Gauge As-Oil Level | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
9r-6598 Housing Gp-Axle
| 2S***80 | Cup-Tapered Roller; Cup-Roller Bearing | 1 |
| 6L***20 | Plug-Zinc Rod | 2 |
| 8M***93 | Ring-Retaining | 1 |
240-0080 Power Train Ar
| 18***97 | Control Group-Steering | 1 |
| 18***14 | Shaft Group-Drive | 1 |
| 23***78 | Control Group-Differential Lock | 1 |
240-0056 Power Train Ar
| 12***85 | Axle & Mtg Group-Drive & Steering; -Front | 1 |
| 18***13 | Shaft Group-Drive | 1 |
| 18***41 | Transmission Ar-Power Shift | 1 |
184-1113 Shaft Gp-Drive
| 11***42 | Bearing Kit-Cross | 1 |
| 17***37 | Universal Joint Group | 1 |
| 18***13 | Shaft Group-Drive | 1 |
184-1114 Shaft Gp-Drive
| 11***39 | Kit-Spider & Bearing | 2 |
| 17***38 | Universal Joint Group | 1 |
| 18***14 | Shaft Group-Drive | 1 |
205-9246 Transmission & Mounting Gp
| 11***21 | Support As; (Rh) | 2 |
| 17***33 | Transmission Group-Power Shift | 1 |
| 20***46 | Transmission & Mounting Group | 1 |
205-9245 Transmission & Mounting Gp
| 11***21 | Support As; (Rh) | 2 |
| 18***59 | Transmission Group-Power Shift | 1 |
| 20***45 | Transmission & Mounting Group | 1 |
185-1541 Transmission Ar-Power Shift
| 11***40 | Filter-Oil; (Standard Efficiency)(Transmission) | 1 |
| 18***41 | Transmission Ar-Power Shift | 1 |
| 18***44 | Drive Group-Flexible Coupling | 1 |
185-1540 Transmission Ar-Power Shift
| 11***40 | Filter-Oil; (Standard Efficiency)(Transmission) | 1 |
| 18***40 | Transmission Ar-Power Shift | 1 |
| 18***44 | Drive Group-Flexible Coupling | 1 |
179-2833 Transmission Gp-Power Shift
| 00***62 | Seal-O-Ring; (63.17mm Id) | 2 |
| 09***27 | Ring-Retaining | 1 |
| 09***28 | Ring-Retaining; (External) | 1 |
184-3659 Transmission Gp-Power Shift
| 00***62 | Seal-O-Ring; (63.17mm Id) | 2 |
| 09***27 | Ring-Retaining | 1 |
| 09***28 | Ring-Retaining; (External) | 1 |
147-0209 Valve Gp-Relief
| 10***86 | Seal-O-Ring | 1 |
| 14***09 | Valve Group-Relief; -Pump Pressure-Pressure Regulator | 1 |
| 6V***78 | Seal-O-Ring; (25.12mm Id) | 1 |
238-1967 Valve Gp-Solenoid
| 06***39 | Seal-O-Ring | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
238-1966 Valve Gp-Solenoid
| 06***39 | Seal-O-Ring | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***11 | Coil As; (Forward) | 1 |
121-4036 Valve Gp-Solenoid
| 12***36 | Valve Group-Solenoid; -Transmission | 1 |
| 12***35 | Kit-Seal | 1 |
| 12***72 | Cartridge As | 1 |
238-1968 Valve Gp-Solenoid
| 06***39 | Seal-O-Ring | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
9r-2986 Wheel & Tire Gp
| 14***21 | Nut-Hex Flange; (3/4-16-Thd) | 16 |
| 9R***38 | Wheel & Tire Group-Front | 2 |
| 9R***86 | Wheel & Tire Group-Front; Tire & Wheel Gp-Front | 1 |
9r-3544 Wheel & Tire Gp
| 2D***28 | Core-Valve | 1 |
| 2D***29 | Grommet | 1 |
| 2D***30 | Washer-Ring | 1 |
9r-2279 Wheel & Tire Gp
| 14***21 | Nut-Hex Flange; (3/4-16-Thd) | 16 |
| 9R***79 | Wheel & Tire Group-Front; (Front, 4-Wheel Drive) | 1 |
| 9R***43 | Wheel & Tire Group-Front | 1 |
9r-2938 Wheel & Tire Gp
| 2D***28 | Core-Valve | 1 |
| 2D***29 | Grommet | 1 |
| 2D***30 | Washer-Ring | 1 |
9r-3543 Wheel & Tire Gp
| 2D***28 | Core-Valve | 1 |
| 2D***29 | Grommet | 1 |
| 2D***30 | Washer-Ring | 1 |
9r-2243 Wheel & Tire Gp
| 14***21 | Nut-Hex Flange; (3/4-16-Thd) | 24 |
| 9R***43 | Wheel & Tire Group-Rear; Tire & Wheel Gp-Rear | 1 |
| 9R***57 | Wheel & Tire Group-Rear-Lh | 1 |
9r-3657 Wheel & Tire Gp
| 12***29 | Wheel As; (Dw18lx24)(Dw18lx24) | 1 |
| 27***16 | Tire; (21l-24)(21l-24) | 1 |
| 6D***37 | Valve Group-Tire | 1 |
9r-3658 Wheel & Tire Gp
| 12***29 | Wheel As; (Dw18lx24)(Dw18lx24) | 1 |
| 27***94 | Tire; (21l-24) | 1 |
| 6D***37 | Valve Group-Tire | 1 |
275-3981 Wheel & Tire Ar
| 14***21 | Nut-Hex Flange; (3/4-16-Thd) | 16 |
| 27***81 | Wheel & Tire Ar | 1 |
| 27***82 | Wheel & Tire Group; -Lh | 1 |
163-1051 Wheel & Tire Ar
| 10***27 | Wheel As; (12.25x19.5) | 1 |
| 14***21 | Nut-Hex Flange; (3/4-16-Thd) | 16 |
| 16***51 | Wheel & Tire Ar | 1 |
276-4293 Wheel & Tire Gp -Rh
| 12***29 | Wheel As; (Dw18lx24)(Dw18lx24) | 1 |
| 27***16 | Tire; (21l-24)(21l-24) | 1 |
| 27***93 | Wheel & Tire Group; -Rh | 1 |
275-3982 Wheel & Tire Gp -Lh
| 10***27 | Wheel As; (12.25x19.5) | 1 |
| 27***82 | Wheel & Tire Group; -Lh | 1 |
| 27***84 | Tire; (15-19.5) | 1 |
275-3616 Wheel & Tire Gp
| 10***27 | Wheel As; (12.25x19.5) | 1 |
| 27***16 | Wheel & Tire Group | 1 |
| 27***17 | Tire; (15-R19.5) | 1 |
276-4291 Wheel & Tire Gp
| 14***21 | Nut-Hex Flange; (3/4-16-Thd) | 24 |
| 27***91 | Wheel & Tire Group | 1 |
| 27***92 | Wheel & Tire Group; -Lh | 1 |
276-4292 Wheel & Tire Gp -Lh
| 12***29 | Wheel As; (Dw18lx24)(Dw18lx24) | 1 |
| 27***16 | Tire; (21l-24)(21l-24) | 1 |
| 27***92 | Wheel & Tire Group; -Lh | 1 |
275-3983 Wheel & Tire Gp -Rh
| 10***27 | Wheel As; (12.25x19.5) | 1 |
| 27***83 | Wheel & Tire Group; -Rh | 1 |
| 27***84 | Tire; (15-19.5) | 1 |
275-3615 Wheel & Tire Gp
| 14***21 | Nut-Hex Flange; (3/4-16-Thd) | 16 |
| 27***15 | Wheel & Tire Group | 1 |
| 27***16 | Wheel & Tire Group | 2 |
Service Equipment And Supplies
241-9534 Film Gp
| 10***03 | Fastener | 8 |
| 10***05 | Film-Stripe; (Cat) | 1 |
| 10***06 | Film-Stripe; (Cat) | 1 |
121-5996 Lock Gp-Vandalism
| 12***96 | Lock Group-Vandalism | 1 |
| 5P***00 | Key Total 2 Pieces Per Unit; (Literature Compartment) | 1 |
| 5P***02 | Padlock Group; (Includes: Battery Compartments, Platform Compartments, Radiator Access Door, Firewall Doors) | 4 |
263-8591 Plate & Film Gp
| 24***18 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
| 26***91 | Plate & Film Group | 1 |
240-0063 Plate & Film Gp
| 13***58 | Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap) | 1 |
| 15***33 | Film-Identification; (12-Volt) | 1 |
| 19***45 | Film-Information; (Water Separator) | 1 |
112-9177 Transport Gp-Machine
| 03***32 | Strap--Harness Assembly To Compressor | 4 |
| 11***77 | Transport Group-Machine | 1 |
| 11***07 | Tube | 1 |
Steering System
9r-1310 Axle Gp-Front
| 00***20 | Washer-Thrust; (35x63.5x3.14-mm Thk) | 2 |
| 13***75 | Stud | 8 |
| 14***20 | Connector As | 2 |
9t-1834 Cylinder Gp-Steering
| 10***89 | Rod As | 1 |
| 10***91 | Cylinder As | 1 |
| 16***98 | Seal As-Buffer | 2 |
153-7369 Knob Gp-Steering
| 15***69 | Knob Group-Steering | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 1 |
| 8T***24 | Washer-To Assemble Valve As And Plates | 1 |
112-5410 Lines Gp-Steering
| 11***10 | Lines Group-Steering | 1 |
| 14***42 | Connector Group | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
240-2606 Lines Gp-Steering
| 12***92 | Hose As | 1 |
| 14***18 | Connector As | 4 |
| 14***25 | Connector As. | 1 |
241-3757 Pump Gp-Metering
| 24***57 | Pump Group-Metering | 1 |
280-6839 Steering Column Gp
| 14***77 | Knob; (Steering Column Tilt) | 1 |
| 21***55 | Kit-Tilt Lever; (Steering Column) | 1 |
| 28***39 | Steering Column Group | 1 |
206-6974 Steering Column Gp
| 14***77 | Knob; (Steering Column Tilt) | 1 |
| 20***74 | Steering Column Group; -Tilt | 1 |
| 21***55 | Kit-Tilt Lever; (Steering Column) | 1 |
9r-2925 Steering Gp-Hydraulic
| 10***37 | Boot | 1 |
| 10***38 | Ring | 1 |
| 10***39 | Ring | 1 |
153-9580 Steering Wheel Gp
| 14***91 | Steering Wheel As | 1 |
| 15***68 | Plug | 1 |
| 15***80 | Steering Wheel Group | 1 |
9t-1545 Valve Gp-Priority
| 10***54 | Spring | 1 |
| 12***76 | Seat As-Shuttle | 1 |
| 1S***47 | Seal 17.17 mm. (.676 In.) I.D. | 1 |
Work Tools
104-6310 Fork Gp
| 10***10 | Fork Group; Fork Gp | 1 |
| 10***11 | Bracket As | 2 |
| 10***12 | Fork As | 2 |
272-1701 Bucket Ar-Multipurpose
| 27***01 | Bucket Ar-Multipurpose | 1 |
| 27***03 | Bucket Group-Multipurpose | 1 |
| 9R***20 | Edge Group-Cutting | 1 |
243-4519 Bucket Ar-Multipurpose
| 20***36 | Edge Group-Cutting | 1 |
| 24***18 | Bucket Group-Multipurpose | 1 |
| 24***19 | Bucket Ar-Multipurpose | 1 |
268-5601 Bucket Ar-Multipurpose
| 20***36 | Edge Group-Cutting | 1 |
| 26***01 | Bucket Ar-Multipurpose | 1 |
| 26***02 | Bucket Group-Multipurpose | 1 |
272-1700 Bucket Ar-Multipurpose
| 27***00 | Bucket Ar-Multipurpose | 1 |
| 27***02 | Bucket Ar-Multipurpose | 1 |
| 9R***20 | Edge Group-Cutting | 1 |
272-1702 Bucket Ar-Multipurpose
| 10***10 | Fork Group; Fork Gp | 1 |
| 27***02 | Bucket Ar-Multipurpose | 1 |
| 27***03 | Bucket Group-Multipurpose | 1 |
9r-3088 Bucket As-General Purpose
| 9R***04 | Bearing-Sleeve | 4 |
| 9R***88 | Bucket As | 1 |
| 9R***97 | Edge | 2 |
270-9165 Bucket As-General Purpose
| 10***85 | Bracket As-Tilt; (Rh) | 1 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
9r-9766 Bucket As-General Purpose
| 9R***04 | Bearing-Sleeve | 2 |
| 9R***97 | Edge | 2 |
| 9R***01 | Edge | 1 |
278-4502 Bucket As-Hoe -Heavy-Duty
| 17***79 | Plate | 7 |
| 19***24 | Adapter; (2-Strap) | 3 |
| 27***83 | Bracket As; (Rh) | 1 |
278-4488 Bucket As-Hoe -Heavy-Duty
| 17***80 | Plate | 7 |
| 19***24 | Adapter; (2-Strap) | 4 |
| 27***83 | Bracket As; (Rh) | 1 |
275-4027 Bucket As-Hoe -Heavy-Duty
| 19***16 | Plate | 7 |
| 19***24 | Adapter; (2-Strap) | 6 |
| 27***27 | Bucket As-Hoe; -Heavy-Duty | 1 |
278-4494 Bucket As-Hoe -Heavy-Duty
| 17***65 | Plate | 7 |
| 19***24 | Adapter; (2-Strap) | 4 |
| 27***83 | Bracket As; (Rh) | 1 |
105-2868 Bucket Gp-General Purpose
| 10***68 | Bucket Group-General Purpose | 1 |
| 9R***48 | Edge Group-Cutting | 1 |
| 9R***66 | Bucket As-General Purpose | 1 |
9r-7090 Bucket Gp-General Purpose
| 9R***88 | Bucket As | 1 |
| 9R***90 | Bucket Group-General Purpose | 1 |
| 9R***48 | Edge Group-Cutting | 1 |
270-9163 Bucket Gp-General Purpose
| 27***63 | Bucket Group-General Purpose | 1 |
| 27***65 | Bucket As-General Purpose | 1 |
| 9R***48 | Edge Group-Cutting | 1 |
9r-3230 Bucket Gp-Hoe
| 6Y***22 | Tip Group-Long | 5 |
| 6Y***24 | Adapter-Tip; (2-Strap) | 5 |
| 6Y***28 | Pin-G.E.T. | 5 |
9r-3218 Bucket Gp-Hoe
| 6Y***22 | Tip Group-Long | 3 |
| 6Y***24 | Adapter-Tip; (2-Strap) | 3 |
| 6Y***28 | Pin-G.E.T. | 3 |
278-4487 Bucket Gp-Hoe
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***87 | Bucket Group-Hoe | 1 |
278-4499 Bucket Gp-Hoe
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***99 | Bucket Group-Hoe | 1 |
278-4493 Bucket Gp-Hoe
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***93 | Bucket Group-Hoe | 1 |
9r-3224 Bucket Gp-Hoe
| 6Y***22 | Tip Group-Long | 4 |
| 6Y***24 | Adapter-Tip; (2-Strap) | 4 |
| 6Y***28 | Pin-G.E.T. | 4 |
9r-9824 Bucket Gp-Hoe
| 6Y***22 | Tip Group-Long | 4 |
| 6Y***24 | Adapter-Tip; (2-Strap) | 4 |
| 6Y***28 | Pin-G.E.T. | 4 |
9r-9830 Bucket Gp-Hoe
| 6Y***22 | Tip Group-Long | 5 |
| 6Y***24 | Adapter-Tip; (2-Strap) | 5 |
| 6Y***28 | Pin-G.E.T. | 5 |
275-4026 Bucket Gp-Hoe
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***26 | Bucket Group-Hoe | 1 |
9r-3236 Bucket Gp-Hoe
| 6Y***22 | Tip Group-Long | 6 |
| 6Y***24 | Adapter-Tip; (2-Strap) | 6 |
| 6Y***28 | Pin-G.E.T. | 6 |
243-4518 Bucket Gp-Multipurpose
| 09***28 | Fitting-Grease | 4 |
| 24***18 | Bucket Group-Multipurpose | 1 |
| 3B***19 | Pin-Cotter | 2 |
242-9900 Bucket Gp-Multipurpose
| 0S***73 | Bolt (102mm Long); (1/2-13x4-In) | 2 |
| 0T***65 | Bolt--3/8" X 3 1/2"--Use As Required; Bolt 5t***56 Plate To Cover Gp 4n***72 | 2 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
268-5602 Bucket Gp-Multipurpose
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 26***73 | Edge-Cutting | 1 |
272-1703 Bucket Gp-Multipurpose
| 09***65 | Pin-Cotter | 4 |
| 09***20 | Pin-Cotter | 2 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
272-1707 Bulldozer As
| 21***78 | Bracket | 2 |
| 21***80 | Bracket As | 1 |
| 21***81 | Bracket | 4 |
272-1708 Bulldozer As
| 16***30 | Plate-Identification; (Cat) | 1 |
| 27***08 | Bulldozer As | 1 |
| 27***12 | Bracket As | 2 |
6q-2190 Bulldozer As
| 26***49 | Plate As; (Bottom) | 2 |
| 4V***69 | Plate Assem. | 4 |
| 6Q***90 | Bulldozer As | 1 |
6q-2192 Clam As-Multipurpose Bucket
| 26***57 | Cutter-Side | 2 |
| 26***58 | Cutter-Side | 2 |
| 6Q***92 | Clam As-Multipurpose Bucket | 1 |
272-1719 Clam As-Multipurpose Bucket
| 27***19 | Clam As-Multipurpose Bucket | 1 |
| 27***20 | Plate As-Side; (Rh) | 1 |
| 27***40 | Plate As-Side; (Lh) | 1 |
9r-5320 Edge Gp-Cutting
| 11***10 | Edge-Cutting | 2 |
| 4F***57 | Bolt-Plow; (5/8-11x2.75-In) | 8 |
| 4K***67 | Nut Rear Support To Frame | 8 |
9r-7948 Edge Gp-Cutting
| 3F***08 | Bolt-Plow; (5/8-11x2.25-In) | 12 |
| 4K***67 | Nut Rear Support To Frame | 12 |
| 9R***48 | Edge Group-Cutting | 1 |
206-7236 Edge Gp-Cutting
| 17***82 | Edge-Cutting | 2 |
| 20***36 | Edge Group-Cutting | 1 |
| 3F***08 | Bolt-Plow; (5/8-11x2.25-In) | 8 |
446D serial number reference
The PIN plate is a stamped metal plate riveted near the operator's station - typically on the dash console inside the cab or on the cab pillar/left side of the front frame near the cab, depending on exact fit. It carries the full 17-character PIN. The first 3 characters are the serial-number prefix that identifies the model/series (DBL for 446D); the digits that follow are the sequential unit number for that build run. Exact plate position can vary slightly by build date - check the cab interior and frame near the cab if not immediately visible.
| Prefix | Identifies | Notes |
|---|---|---|
| DBL | 446D backhoe loader - full production run | Only documented prefix for the 446D. Serials run DBL00001 and up. Machine carries the Cat 3114 DIT, a turbocharged direct-injection 4-cylinder diesel rated about 82 kW (110 hp) gross, 76 kW (102 hp) net. Production falls in the 2004-2008 window. Standard drive is 4x2 (2WD) with a 5-forward/3-reverse auto-shift transmission and the center-pivot backhoe boom layout; some units are seen configured with front-wheel drive, but no separate prefix ties to that option, so treat DBL as covering the whole 446D range unless your dealer parts lookup shows otherwise. |
Frequently asked questions
What engine does the Caterpillar 446D use?
The 446D runs a Cat 3114 DIT, a 4.4 L (268 ci) turbocharged direct-injection 4-cylinder diesel rated about 82 kW (110 hp) gross and 76 kW (102 hp) net at 2,200 rpm. Caterpillar used the same 3114 block, in different tunes, across the 446, 446B and 446D generations.
What is the operating weight of the Caterpillar 446D?
Operating weight runs from about 8,920 kg (19,666 lb) in base 4x2 trim to roughly 11,500 kg (25,357 lb) fully equipped with 4x4 MFWD, enclosed cab and counterweight. The exact figure varies by configuration.
What replaced the Caterpillar 446D?
Caterpillar never released a 446E; the 446 nameplate ended with the D-series after its 2004-2008 run. There is no direct named successor, but the heavy-duty slot it held at the top of Cat's center-pivot backhoe range is now filled by the 450.
What 446D owners discuss
What engine powers the Cat 446D, and what's its reputation among owners?
The 446D runs Caterpillar's 3114 DIT, a 4.4 L (268 ci) turbocharged direct-injection inline-four. Published output runs roughly 76-82 kW (100-110 hp) with peak torque near 455 Nm (336 lb-ft) at 1400 rpm — the spread reflects gross vs. net rating conventions across different spec sheets, not a real config split. It's regarded as a strong, torquey block for the size class, but owners flag a known quirk on this engine family: a fuel-metering rod inside the injector can stick, causing over-fueling that shows up as heavy black smoke under load, an audible knock, and hard starting after the machine sits. Pulling the valve cover to check rod protrusion on the suspect cylinder is the standard first check before condemning the turbo or fuel-transfer pump.
How does the Autoshift transmission behave, and what usually causes shifting complaints?
The 446D shipped with Cat's Autoshift power-shift transmission, which selects gear automatically off grade and load rather than needing a manual shift lever. Community reports of the transmission hunting between gears, refusing to engage a gear, or acting up with no consistent pattern trace back more often to a sticking neutralizer/interlock switch, corroded wiring at the fuse panel, or worn shift linkage than to internal transmission wear. Before tearing into the transmission itself, check the neutral safety switch and its connectors.
The machine goes into hydraulic lockout and the backhoe won't do anything — what's the real cause?
The 446D uses a load-sensing, variable-flow hydraulic system that delivers full hoe force across the engine's speed range, with a lockout switch and indicator on the right console that isolates backhoe functions when engaged. Owners describe machines arriving stuck in lockout with every hoe function dead except one, and the root cause traced back to something as simple as a blown starter fuse rather than a stuck valve or failed pump. Check the lockout switch and fuses before pulling the control valve stack apart.
What wear patterns should I expect on the loader pivots, backhoe cylinders, and stabilizers?
Same pattern as any center-pivot loader/backhoe of this size: bushing wear at the loader main pivot shows up as lateral bucket play, with the bucket wandering side to side when raised instead of swinging straight. Dipper and extendahoe cylinder piston seals wear over time and show up as drift in the extend direction; owners running comparable Cat backhoes report needing to repack front cylinders well before the back half of the machine's service life on hard-use jobs, so treat that as a loose range rather than a fixed interval — it varies heavily by application. Stabilizer rubber pads are a site-specific wear item, with pavement and gravel work chewing through them faster than dirt. Routine greasing of all pivot points slows the wear on all of the above.
What electrical or sensor issues come up most on this generation of Cat backhoe?
Machines of this vintage are known for wiring-harness and fuse-panel corrosion that produces intermittent no-crank, no-shift, or false-lockout symptoms that look like bigger mechanical failures than they are. Park-brake circuits throw low-voltage faults that usually trace back to corroded connectors at the solenoid rather than the solenoid itself. Cleaning and re-terminating connections resolves a good share of these complaints before any component gets replaced.
Brakes feel weak or the park brake won't release properly — what's typical, and is it safe to keep running?
Inconsistent park-brake release or engagement on this generation of Cat backhoe is commonly traced to low voltage or corrosion at the solenoid connector rather than a failed solenoid or worn brake pack. Because the service and park brake share the same control circuit and are safety-critical, don't return the machine to a live jobsite on a hunch. Have your dealer inspect and pressure-test the brake system before putting it back to work.
What should I check before buying a used 446D?
Confirm the engine is the 3114 DIT and matches the serial/PIN plate, start it cold, and watch for hard starting or heavy black smoke under load — both flag injector wear. Cycle every backhoe function from both foot pedals, the outriggers, and the extendahoe if the machine has one, and confirm the lockout switch and indicator respond correctly in both positions. Run the Autoshift transmission through its full range under load and watch for hunting or a gear it refuses to engage. Check the loader main pivot for lateral bucket play, inspect the dipper and extendahoe cylinders for seepage or drift, and check stabilizer pad wear. Parts and documentation for the 446D specifically run thinner than for Cat's 420/430 backhoe lines, so confirm parts support with your dealer before committing to the purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 446D part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.