Caterpillarbackhoe loader(no series)
Caterpillar 444E
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 444E is Caterpillar's largest side-shift-boom, all-wheel-steer backhoe loader from the 4-Series E-range, built at Caterpillar's Desford, UK plant alongside its smaller 420E, 422E, 428E, 432E, 434E, and 442E siblings. Early production, LBE serial prefix, runs the mechanically governed Cat 3054C DIT turbocharged diesel with no engine electronics; later production, NBA and HXB prefixes, switches to the electronically controlled Cat C4.4 turbocharged and aftercooled diesel for Stage IIIA/Tier 3 markets, both rated around 76 kW (102 hp) gross on roughly the same 4.4-liter displacement. Operating weight runs about 8,810 kg (19,423 lb) in standard 4WD trim, more with a cab, attachments, or the factory extendable dipper stick (E-Stick) fitted. Production ran roughly from the mid-2000s into 2011, with all-wheel steering offering two-wheel, circle, and crab steer modes, an ISO/SAE backhoe pattern changer, a Dual Lock backhoe coupler, and an Integrated Tool Carrier loader coupler among its factory-offered configurations.
The defining change across the 444E's production run is the engine: the move from the simple, mechanically governed 3054C to the electronically controlled, emissions-tiered C4.4 also brought an ECM, dealer diagnostic fault codes, and a different failure pattern, so parts and troubleshooting need to be matched to the correct serial prefix rather than treated as interchangeable. The cast slider-frame boom construction, carried across the whole 4-Series range, lets a shop service the side-shift slide through exterior lock clamps instead of pulling the backhoe apart. In the used and parts market today, the 444E holds its place because it predates DEF/SCR aftertreatment entirely, keeping its emissions system simple to own regardless of which engine is fitted, and because its driveline, hydraulic, and cab components interchange closely across the 420E-444E family, which keeps parts support wide well after the model left production. It was succeeded by the 444F, and Caterpillar has since carried the 444 name forward on a current Stage V, C3.6-powered side-shift model.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 444E specifications
Engine
| Engine model (North America, Tier 2/Tier 3 equivalent) | Cat 3054C DIT (direct-injection, turbocharged), 4-cylinder diesel |
| Engine model (EU Stage IIIA markets) | Cat C4.4, turbocharged and aftercooled, 4-cylinder diesel, same displacement class as 3054C |
| Gross power (3054C, @2200 rpm) | 76.1 kW (102 hp) |
| Net power (3054C, @2200 rpm) | 73.8 kW (99 hp) |
| Power class (C4.4, Stage IIIA variant) | approx. 74.5 kW net power class |
| Displacement | 4.4 L (4,402 cc / 268.6 cu in) |
| Cylinders | 4, direct injection |
| Net torque rise | 31% |
| Emissions tier | US EPA Tier 2 or Tier 3 equivalent (3054C); EU Stage II (3054C, non-aftercooled) or EU Stage IIIA (C4.4, aftercooled) depending on market |
Weights
| Operating weight (4WD, standard configuration) | 8,810 kg (19,423 lb) |
| Shipping weight / ground pressure | not published in available dealer/aggregator spec data for this model |
Dimensions
| Transport length | 6.09 m (19 ft 8-4/5 in) |
| Transport width | 2.32 m (7 ft 7 in) |
| Transport height | 3.87 m (12 ft 8-1/2 in) |
| Height to top of suspended cab | 2.85 m (9 ft 4-1/3 in) |
| Wheelbase | 2.20 m (7 ft 2-1/2 in) |
| Turning radius | 6.00 m (19 ft 8 in) |
Performance
| Travel speed, forward (max) | 41.0 km/h (25.5 mph) |
| Travel speed, reverse (max) | 40.1 km/h (24.9 mph) |
| Transmission | Power-shuttle, 5 forward / 5 reverse gears |
| Backhoe dig depth, standard dipper | 5.38 m (17 ft 8 in) |
| Backhoe dig depth, extendable dipper | 6.56 m (21 ft 6 in) |
| Backhoe reach from swing pivot, standard dipper | 6.07 m (19 ft 11 in) |
| Backhoe load/dump height, standard dipper | 4.01 m (13 ft 2 in) |
| Backhoe load/dump height, extendable dipper | 4.58 m (15 ft) |
| Loader bucket capacity | 1.31 m3 (1.71 yd3) |
| Loader bucket breakout force | 64.0 kN (14,388 lbf) |
| Loader lift capacity at full height | 3,872 kg (8,539 lb) |
| Loader clearance at max dump height | 2.70 m (8 ft 10 in) |
| Hydraulic pump flow | 156.3 L/min (41.3 gpm), variable-flow axial-piston pump |
Service capacities (summary)
| Fuel tank | 187.4 L (49.5 gal) |
| Hydraulic system | 38.2 L (10.1 gal) |
| Cooling system | 16.3 L (4.3 gal) |
| Engine oil (with filter) | not separately published in available spec data for this model; refer to 3054C/C4.4 engine service literature |
| Transmission | 20.1 L (5.3 gal) |
| Front axle | 14.0 L (3.7 gal) |
| Rear axle | 16.3 L (4.3 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
444E fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 7.6 L (2.0 US gal) | Cat DEO-ULS or Cat DEO diesel engine oil. Viscosity by climate: SAE 0W-40 (Cat DEO-ULS Cold Weather) down to -40C; SAE 5W-40 (Cat DEO-ULS SYN or Cat DEO SYN) -30C to 50C; SAE 10W-30 -18C to 40C; SAE 15W-40 from about -9C up to 50C. |
| Cooling system | 19.5-25.3 L (5.1-6.7 US gal), varies by configuration (cab heater fitted or not, and engine emissions tier) | Cat ELC (Extended Life Coolant), factory fill and preferred. Cat DEAC (Diesel Engine Antifreeze/Coolant) is an acceptable alternate. Never run plain water alone as coolant. |
| Fuel tank | 160-187 L (42.2-49.4 US gal), varies by tire/track configuration | Ultra low sulfur diesel per Cat fuel specification. Use a winter-grade fuel blend or approved fuel additive in cold climates to prevent gelling. |
| Transmission (direct drive or power shift, per machine build) | 18.5-19.0 L (4.9-5.0 US gal), depending on transmission type fitted | Cat TDTO (Transmission/Drive Train Oil). Viscosity by climate: SAE 0W-20 (Cat TDTO Cold Weather) down to -40C; SAE 10W (factory fill) -20C to 35C; SAE 30 25C to 50C; Cat TDTO-TMS multi-grade where wide temperature swings occur. |
| Front axle differential | 11-14 L (2.9-3.7 US gal), varies by configuration | Cat TDTO. SAE 0W-20 cold weather grade down to -40C; SAE 10W -20C to 10C; SAE 30 (factory fill) -10C to 50C; SAE 50 in hot climates; Cat TDTO-TMS for wide operating temperature ranges. |
| Front final drives (each side) | 0.7-1.7 L (0.2-0.45 US gal), varies by configuration | Same Cat TDTO viscosity grades as the front axle differential. |
| Rear axle differential | 16.0-16.5 L (4.2-4.4 US gal), varies by steering configuration | Cat TDTO 30 or Cat TO-4 30, SAE 30, rated -25C to 40C. Cat MTO or commercial M2C134-D spec oil must not be used in this rear axle. |
| Rear final drives (each side) | 1.7 L (0.45 US gal) | Cat TDTO 30 or Cat TO-4 30, SAE 30. |
| Hydraulic tank | 40 L (10.6 US gal) | Cat HYDO Advanced 10 (SAE 10W) is the factory-fill and preferred fluid; it extends the drain interval to 3000 hours. Acceptable alternates: Cat HYDO Advanced 30 or Cat TDTO SAE 30 in warm climates (0C to 50C); Cat Bio HYDO Advanced (biodegradable, ISO 46) -20C to 40C; Cat DEO-ULS/DEO SAE 15W-40; Cat TDTO Cold Weather SAE 0W-20; or Cat ECF-1a/ECF-2/ECF-3 SAE 0W-30. |
| Hydraulic system total (tank plus lines and cylinders) | 79-99 L (20.9-26.1 US gal), minimum to maximum depending on attached work tools and cylinder extension | Same fluid specification as the hydraulic tank. |
| Grease (all chassis and boom lubrication points) | Applied through grease fittings per the lubrication schedule; no reservoir fill capacity applies | Cat Ultra 5Moly Grease for high-load, high-speed duty: NLGI 1 in cold climates (-35C to 40C) or NLGI 2 (-30C to 50C). Cat Advanced 3Moly Grease NLGI 2 for general/medium duty (-20C to 40C). Cat Multipurpose Grease NLGI 2 for light/utility duty with intermittent cycles (-30C to 40C). |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 444E maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 3,000 h |
|
| Every 12,000 h |
|
Servicing the 444E beyond the schedule
Predictive Maintenance & Fluid Analysis
Run Cat S.O.S sampling on engine, transmission, differential, and hydraulic oil at every interval — the main early-warning tool on this machine. Earlier LBE-prefix units carry the mechanically governed 3054C with no ECM and only switch-driven coolant and oil-pressure lamps, so trend oil analysis instead of chasing codes. Later NBA/HXB units run the electronically controlled C4.4, giving CID/FMI fault codes through the cab lamp and a dealer diagnostic tool. Since pilot pressure is shared across the valve bank, check it regularly to catch weak lift or dig force early.
Corrective & Common Repairs
The power-shuttle transmission's most common complaint is popping out of third or fourth gear, usually traced to a sticking or shorted neutralizer switch rather than the clutch packs. Weak lift or dig force is more often a worn control-valve spool or a leaking cylinder seal than a failed pump, since pilot pressure is shared across the valve bank. Boom, dipper, and bucket pins wear their bushings before the pin bores; stabilizer and extendable-stick slide pads need periodic take-up. On high-hour 3054C engines, watch for head-gasket coolant leaks.
Overhaul & Rebuild Points
Plan an inframe overhaul of the 3054C or C4.4 four-cylinder diesel around major life milestones, with a turbocharger rebuild as the usual companion job. Boom foot, dipper, and bucket linkage pins run in replaceable bushings that wear out well before the pin bores; resleeve or line-bore only once bushings alone won't take up play. Inspect the boom, loader arms, and bucket for welds or repairs, a sign of prior structural failure. Power-shuttle clutch packs and front/rear differential gear sets are the next wear items once oil-sample metal counts start climbing.
Seasonal & Environment Servicing
In cold climates, check Cat ELC concentration for freeze protection before winter, switch to a cold-weather engine oil grade (Cat DEO-ULS) below -18C, and run a winter fuel blend so the tank doesn't gel between fills on this turbocharged four-cylinder diesel. In hot, dusty conditions, clean the radiator and turbocharger aftercooler fins often — restricted airflow overheats this engine fast — and shorten air filter and fuel-water-separator drain intervals. The load-sensing hydraulic pump is contamination-sensitive, so tighten hydraulic oil sampling in dusty or humid environments.
444E common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 228-9130 | Filter As-Water Sep & Fuel | Fuel system service | Check fitment → |
| 227-7449 | Filter Element-Air | Air intake service | Check fitment → |
| 211-2661 | Filter Element As-Air | Air intake service | Check fitment → |
| 126-1817 | Filter-Oil | Hydraulic service | Check fitment → |
| 134-0404 | Switch As-Pressure | Lubrication service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
444E fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| CID 0100 FMI 01 | Engine oil pressure below normal — active low-pressure event, not a sensor fault. | Low oil level, worn oil pump, plugged oil filter, or failed pressure sensor. | Shut the engine down immediately, check oil level and filter condition, then verify the sensor if oil level and filter check out. |
| CID 0100 FMI 03/04 | Engine oil pressure sensor circuit reading open (above normal) or shorted (below normal), not a true pressure problem. | Damaged sensor harness, corroded connector, or a failed sensor. | Inspect the sensor connector and wiring for damage and continuity; replace the sensor if the circuit checks out. |
| CID 0110 FMI 00 | Engine coolant temperature above normal — active overheat condition. | Low coolant level, clogged radiator core, slipping or failed fan drive, or a stuck thermostat. | Stop and let the engine idle down or cool, check coolant level and radiator for debris, and check fan and thermostat operation before returning to work. |
| CID 0110 FMI 03/04 | Coolant temperature sensor circuit reading open or shorted, not an actual overheat. | Damaged sensor wiring, corroded connector, or a failed sensor. | Check connector condition and wiring continuity; replace the sensor if the circuit tests open or shorted. |
| CID 0190 FMI 08 | Engine speed/timing sensor signal abnormal — erratic or missing frequency, can cause hard starting or a no-start. | Incorrect sensor air gap, a damaged tone-ring tooth, or a corroded sensor connector. | Check sensor gap and mounting, inspect the tone ring for damage, and clean or replace the connector. |
| CID 0168 FMI 01 | System/battery voltage below normal. | Weak or discharged battery, poor ground connection, or a failing alternator. | Load-test the battery, check charging output, and clean or repair corroded ground connections. |
| CID 0041 FMI 03/04 | Sensor supply voltage circuit open or shorted; can make several unrelated sensors read incorrectly at the same time. | Damaged supply wiring, a corroded splice, or an overloaded sensor supply circuit. | Check supply wiring back toward the engine control module before chasing individual sensor codes. |
| Coolant temperature warning lamp (no CID, mechanical-injection engine) | Dash coolant-temperature lamp trips from a simple switch on overheat; earlier production has no engine control module and no numeric fault code, just a switch-activated lamp. | Low coolant, blocked radiator, fan belt or drive fault, or a failed temperature switch. | Stop, let the engine cool, check coolant level and radiator, and verify fan operation before restarting. |
| Engine oil pressure warning lamp (no CID, mechanical-injection engine) | Dash oil-pressure lamp trips from a simple switch when pressure drops below a set threshold; earlier production has no ECM-based fault code. | Low oil level, worn oil pump, plugged filter, or a failed pressure switch. | Shut down immediately, check oil level and filter, and do not resume work until adequate pressure is confirmed. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
444E attachments & work tools
Loader buckets
Front loader mounts a general-purpose bucket or a multi-purpose (4-in-1) bucket, both around 1.3 m³ (1.8 cu yd) capacity. The multi-purpose bucket adds dozing, grading, and clamping functions beyond straight load-and-carry work.
Loader quick coupler / IT arm
An Integrated Tool Carrier (IT) style coupler is offered on the single-tilt loader arm, from the factory or as a field retrofit. It lets the loader end swap buckets, forks, and other front tools without pin-and-hammer changes.
Pallet forks / material handling arm
Forks mount on the loader arm, with or without the IT coupler, for palletized loads and bagged material such as fertilizer or seed. Suited to general construction and landscaping/nursery duty rather than heavy pallet stacking.
Backhoe buckets
Trapezoidal digging buckets for this loader class run roughly 300-900 mm (12-36 in) wide depending on trenching versus general-purpose duty, with a width near 640 mm (25 in) a commonly listed size for this backhoe loader range. Narrower buckets trade capacity for higher breakout force in tight digs.
Backhoe coupler
The rear hoe uses a Dual Lock pin-grabber coupler, offered in mechanical or hydraulic versions, shared across this backhoe loader size range. A separate pin-lock coupler is also offered and is compatible with Wain-Roy and Gannon-style buckets.
Hydraulic hammers
Hammers sized for roughly 5-10 t mini-excavator/backhoe-loader carriers fit this machine, with energy class in the 1,000-1,500 ft-lbf (1,360-2,030 J) range and operating weight near 600-630 kg (1,300-1,400 lb), varies by hammer model. They run off the backhoe's auxiliary hydraulic circuit, not the base circuit.
Auger
A hydraulically driven auger mounts on the backhoe stick for footing, fence-post, sign, and tree-planting holes. It draws off the same auxiliary hydraulic circuit used for hammers and thumbs.
Hydraulic thumb
A thumb clamps to the backhoe stick opposite the bucket for handling pipe, debris, and irregular material. It runs off auxiliary hydraulics routed through the stick, same circuit as the hammer and auger.
Extendable dipper stick (E-Stick)
A factory extendable-stick option adds roughly 1.2 m (4 ft) of reach and dig depth over the standard stick. It carries its own auxiliary hydraulic couplers built in for hammers, thumbs, and augers without extra plumbing.
Brooms
Angle brooms sweep parking lots, yards, and roadways; pickup brooms collect loose debris into a hopper. Both mount on the loader end and run on auxiliary hydraulics.
Cold planer
A loader-mounted cold planer mills asphalt for pothole and utility-cut repair. It runs off auxiliary hydraulics rather than a simple pin-on bucket swap.
Vibratory plate compactor
A plate compactor mounts on the backhoe end for trench backfill and utility-cut compaction. It runs off the backhoe auxiliary hydraulic circuit.
Steering configuration
This is a side-shift backhoe loader with an all-wheel-steer system offering two-wheel steer, circle steer, and crab steer, selectable from the cab. Crab and circle modes improve maneuvering on confined sites compared with a fixed 2WS setup.
Stabilizer and control options
Pilot-operated stabilizer controls are available with an optional Auto-Up feature that raises stabilizers automatically to cut cycle time and improve rear visibility. An in-cab pattern changer lets the operator switch the backhoe joysticks between ISO and SAE control patterns.
All 444E assemblies by section
Every catalogued assembly group for the Caterpillar 444E. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
332-6587 Air Cleaner Gp -Turbo
| 11***45 | Clamp-Hose | 1 |
| 12***59 | Clamp-Hose | 3 |
| 12***78 | Locknut; (M6x1-Thd) | 1 |
234-1981 Air Cleaner Gp -Basic
| 22***49 | Filter Element-Air; (Secondary) | 1 |
| 23***81 | Air Cleaner Group; -Basic | 1 |
| 23***57 | Cover | 1 |
310-2644 Air Cleaner Gp -Turbo
| 11***45 | Clamp-Hose | 1 |
| 12***59 | Clamp-Hose | 3 |
| 12***78 | Locknut; (M6x1-Thd) | 1 |
231-0149 Cover Gp-Inlet Manifold
| 11***22 | Bolt; (M8x16-mm) | 12 |
| 11***79 | Gasket | 3 |
| 18***27 | Plate | 3 |
329-0129 Cover Gp-Inlet Manifold
| 11***22 | Bolt; (M8x16-mm) | 4 |
| 11***79 | Gasket | 3 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 8 |
210-6807 Extension Gp-Exhaust
| 21***07 | Extension Group-Exhaust | 1 |
| 23***70 | Pipe-Extension | 1 |
| 7E***70 | Clamp-Muffler | 1 |
304-3920 Lines Gp-Air
| 14***67 | Clamp-Hose | 2 |
| 20***81 | Bolt-Flange Head; (M8x1.25x20-mm) | 5 |
| 20***73 | Clamp-V Band | 2 |
325-3036 Muffler Gp
| 23***75 | Plate As | 1 |
| 24***01 | Plate As | 1 |
| 25***87 | Clamp As; (Muffler) | 2 |
237-3924 Turbocharger Gp
| 10***16 | Bolt; (M6x16-mm) | 2 |
| 14***67 | Clamp-Hose | 2 |
| 14***36 | Stud | 4 |
326-9156 Turbocharger Gp
| 10***16 | Bolt; (M6x16-mm) | 2 |
| 14***53 | Stud | 4 |
| 17***38 | Bolt | 8 |
Basic Engine
326-9005 Camshaft Gp
| 1B***36 | Key-Woodruff | 1 |
| 27***26 | Rod-Push | 8 |
| 31***84 | Tappet | 8 |
334-4208 Camshaft Gp
| 06***95 | Rod | 8 |
| 13***53 | Tappet | 8 |
| 1B***36 | Key-Woodruff | 1 |
326-9008 Cover Gp-Valve Mechanism
| 10***38 | Bolt; (M6x20-mm) | 2 |
| 10***41 | Bolt; (M6x1x10-mm) | 2 |
| 22***51 | Gasket; (Valve Cover) | 1 |
335-9798 Cover Gp-Valve Mechanism
| 10***38 | Bolt; (M6x20-mm) | 2 |
| 10***41 | Bolt; (M6x1x10-mm) | 2 |
| 22***51 | Gasket; (Valve Cover) | 1 |
232-7400 Crankshaft Gp
| 03***90 | Washer-Thrust; (Standard-Upper)(Upper) | 2 |
| 03***91 | Washer-Thrust; (Standard-Lower)(Lower) | 2 |
| 06***73 | Washer-Thrush (Upper) .18mm (.007in) | 0 |
326-9000 Crankshaft Gp
| 21***14 | Gear-Crankshaft; (34-Teeth) | 1 |
| 23***00 | Crankshaft Group | 1 |
| 27***16 | Kit-Crankshaft | 1 |
334-4203 Crankshaft Gp
| 21***14 | Gear-Crankshaft; (34-Teeth) | 1 |
| 23***00 | Crankshaft Group | 1 |
| 33***03 | Crankshaft Group | 1 |
326-8999 Cylinder Block Gp
| 20***19 | Bolt; (M8x1.25x16-mm) | 10 |
| 23***49 | Housing As | 1 |
| 32***99 | Cylinder Block Group | 1 |
232-7604 Cylinder Block Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 06***02 | Dowel | 10 |
| 06***06 | Plug | 1 |
334-4202 Cylinder Block Gp
| 20***19 | Bolt; (M8x1.25x16-mm) | 10 |
| 23***49 | Housing As | 1 |
| 23***04 | Cylinder Block Group | 1 |
335-1584 Cylinder Block Gp
| 03***63 | Plug | 1 |
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 06***02 | Dowel | 10 |
326-9003 Cylinder Head Gp
| 22***01 | Bolt; (M15x1.5x137-mm) | 7 |
| 22***02 | Bolt; (M15x1.5x162-mm) | 3 |
| 25***46 | Gasket-Head | 1 |
316-7896 Cylinder Head Gp
| 06***06 | Plug | 4 |
| 18***82 | Guide-Valve | 8 |
| 19***51 | Seal-O-Ring | 1 |
334-4205 Cylinder Head Gp
| 22***01 | Bolt; (M15x1.5x137-mm) | 7 |
| 22***02 | Bolt; (M15x1.5x162-mm) | 3 |
| 24***68 | Cylinder Head Group | 1 |
247-4868 Cylinder Head Gp
| 06***06 | Plug | 4 |
| 14***79 | Retainer-Valve Spring | 16 |
| 18***82 | Guide-Valve | 8 |
334-3755 Drive Gp-Auxiliary
| 10***41 | Bolt; (M12x1.75x25-mm) | 3 |
| 28***48 | Pulley Group-Engine | 1 |
| 30***57 | Hub | 1 |
326-9009 Drive Gp-Auxiliary
| 10***41 | Bolt; (M12x1.75x25-mm) | 3 |
| 28***48 | Pulley Group-Engine | 1 |
| 30***57 | Hub | 1 |
303-5770 Drive Gp-Fan
| 11***59 | Bolt; (M10x1.5x35-mm) | 8 |
| 25***37 | Plate | 1 |
| 30***70 | Drive Group-Fan | 1 |
334-3754 Drive Gp-Fan
| 11***59 | Bolt; (M10x1.5x35-mm) | 8 |
| 25***37 | Plate | 1 |
| 32***80 | Housing-Fan Drive | 1 |
303-5768 Flywheel Gp
| 03***87 | Ring-Starting Motor; (126-Teeth) | 1 |
| 0S***03 | Bolt,Machine Fuel Pump Drive Gear Mounting | 10 |
| 24***28 | Flywheel As | 1 |
230-7300 Flywheel Gp
| 03***87 | Ring-Starting Motor; (126-Teeth) | 1 |
| 0S***03 | Bolt,Machine Fuel Pump Drive Gear Mounting | 6 |
| 23***00 | Flywheel Group | 1 |
303-5767 Housing Gp-Flywheel
| 11***63 | Bolt; (M8x1.25x12-mm) | 2 |
| 12***83 | Bolt; (M10x1.5x30-mm) | 6 |
| 22***31 | Housing-Flywheel | 1 |
236-8238 Housing Gp-Flywheel
| 10***17 | Plug | 3 |
| 11***63 | Bolt; (M8x1.25x12-mm) | 2 |
| 12***83 | Bolt; (M10x1.5x30-mm) | 6 |
334-3757 Housing Gp-Front
| 06***79 | Dowel | 1 |
| 10***51 | Bolt; (M8x1.25x65-mm) | 5 |
| 10***95 | Bolt; (M8x1.25x35-mm) | 2 |
304-8760 Housing Gp-Front
| 06***79 | Dowel | 1 |
| 10***51 | Bolt; (M8x1.25x65-mm) | 5 |
| 10***95 | Bolt; (M8x1.25x35-mm) | 2 |
233-7432 Lifting Gp-Engine
| 10***30 | Bolt; (M10x1.5x20-mm) | 4 |
| 22***48 | Plate-Lifting | 2 |
| 23***32 | Lifting Group-Engine | 1 |
326-9013 Lifting Gp-Engine
| 10***30 | Bolt; (M10x1.5x20-mm) | 4 |
| 22***48 | Plate-Lifting | 2 |
| 32***13 | Lifting Group-Engine | 1 |
237-3658 Mounting Gp-Engine
| 10***87 | Plug | 6 |
| 19***32 | Support-Front; (Lh) | 1 |
| 19***34 | Support-Front; (Rh) | 1 |
303-5778 Mounting Gp-Engine
| 10***87 | Plug | 6 |
| 19***32 | Support-Front; (Lh) | 1 |
| 19***34 | Support-Front; (Rh) | 1 |
334-7152 Mounting Gp-Engine & Xmsn
| 33***52 | Mounting Group-Engine & Xmsn | 1 |
| 33***36 | Bolt-Special | 4 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 12 |
322-9476 Pan Gp-Oil
| 06***13 | Gasket | 1 |
| 10***71 | Bolt | 4 |
| 22***05 | Gasket | 1 |
335-9799 Pan Gp-Oil
| 06***13 | Gasket | 1 |
| 10***71 | Bolt | 4 |
| 22***05 | Gasket | 1 |
334-4204 Piston & Rod Gp
| 12***36 | Ring-Retaining | 2 |
| 22***36 | Kit-Piston Ring | 1 |
| 22***37 | Piston As | 4 |
326-9002 Piston & Rod Gp
| 12***36 | Ring-Retaining | 2 |
| 22***38 | Bushing | 1 |
| 22***39 | Bolt-Special; (Connecting Rod) | 2 |
298-5129 Plug Gp-Cylinder Head
| 19***51 | Seal-O-Ring | 1 |
| 23***22 | Plug | 1 |
| 29***29 | Plug Group-Cylinder Head | 1 |
232-6204 Plug Gp-Engine
| 19***51 | Seal-O-Ring | 1 |
| 23***22 | Plug | 1 |
| 23***04 | Plug Group-Engine | 1 |
298-5131 Plug Gp-Engine
| 29***31 | Plug Group-Engine | 1 |
| 2B***58 | Plug--To Block Upper Front Air Manifold | 3 |
230-7569 Plug Gp-Engine
| 23***69 | Plug Group-Engine | 1 |
| 23***46 | Plug | 1 |
304-8761 Plug Gp-Engine
| 21***03 | Washer; (Sealing) | 1 |
| 30***61 | Plug Group-Engine | 1 |
| 6I***46 | Bolt; (M10x1.5x14-mm) | 1 |
225-4317 Plug Gp-Engine
| 22***17 | Plug Group-Engine | 1 |
| 2B***58 | Plug--To Block Upper Front Air Manifold | 3 |
360-7354 Pulley Gp-Crankshaft
| 10***41 | Bolt; (M12x1.75x25-mm) | 3 |
| 28***48 | Pulley Group-Engine | 1 |
| 33***34 | Bolt | 3 |
360-7347 Pulley Gp-Crankshaft
| 10***41 | Bolt; (M12x1.75x25-mm) | 3 |
| 28***48 | Pulley Group-Engine | 1 |
| 33***34 | Bolt | 3 |
315-3385 Rocker Arm Gp
| 22***29 | Plug | 2 |
| 22***34 | Shaft As | 1 |
| 22***38 | Spring | 3 |
225-5963 Rocker Arm Gp
| 18***46 | Screw | 2 |
| 22***25 | Lever As | 4 |
| 22***29 | Plug | 2 |
326-9004 Valve Mechanism Gp
| 31***85 | Rocker Arm Group | 1 |
| 32***04 | Valve Mechanism Group | 1 |
334-4207 Valve Mechanism Gp
| 22***63 | Rocker Arm Group | 1 |
| 33***07 | Valve Mechanism Group | 1 |
Braking System
206-1642 Control Gp-Parking Brake
| 16***53 | Lever Group-Hand Control; -Parking Brake | 1 |
| 20***42 | Control Group-Parking Brake | 1 |
| 26***19 | Cable As | 1 |
261-5517 Control Gp-Parking Brake
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***34 | Switch As-Limit; (Service Brake) | 2 |
| 12***63 | Hose As | 1 |
206-1639 Control Gp-Service Brake -Standard Shift
| 19***72 | Spacer-Special | 3 |
| 19***81 | Washer; (6.2x16.5x2-mm Thk) | 3 |
| 19***00 | O-Ring-Outer | 1 |
216-1613 Cylinder Gp-Brake -Lh
| 03***33 | Pin; (38.86 mm Lg) | 1 |
| 16***98 | Grip | 1 |
| 16***99 | Cover | 1 |
216-1612 Cylinder Gp-Brake -Rh
| 19***72 | Spacer-Special | 3 |
| 19***81 | Washer; (6.2x16.5x2-mm Thk) | 3 |
| 19***00 | O-Ring-Outer | 1 |
163-0753 Lever Gp-Hand Control -Parking Brake
| 16***53 | Lever Group-Hand Control; -Parking Brake | 1 |
| 29***24 | Kit-Seal | 1 |
| 30***71 | Cylinder Head | 1 |
Cooling System
231-0033 Connection Gp-Water
| 23***33 | Connection Group-Water | 1 |
| 25***67 | Regulator Group-Temperature; (Includes Connector)(Water) | 1 |
| 25***70 | Seal-O-Ring; (Water Temperature Regulator) | 1 |
316-6941 Connection Gp-Water
| 25***67 | Regulator Group-Temperature; (Includes Connector)(Water) | 1 |
| 25***70 | Seal-O-Ring; (Water Temperature Regulator) | 1 |
| 31***41 | Connection Group-Water | 1 |
354-1274 Cooler Gp-Engine Oil
| 10***95 | Bolt; (M8x1.25x35-mm) | 4 |
| 22***17 | Cooler-Oil; (Engine) | 1 |
| 22***18 | Seal | 2 |
316-6899 Cooler Gp-Engine Oil
| 22***44 | Gasket; (Engine Oil Filter Base) | 2 |
| 23***51 | Plate; (Blanking) | 1 |
| 24***74 | Head As-Oil Filter; (Engine) | 1 |
238-2799 Cooler Gp-Fltr Base & Eng Oil
| 22***41 | Plug | 1 |
| 22***44 | Gasket; (Engine Oil Filter Base) | 2 |
| 23***51 | Plate; (Blanking) | 1 |
321-3113 Fan Gp-Suction -With Air Conditioner
| 13***81 | Spacer | 1 |
| 14***91 | Spider As; (9-Blade) | 1 |
| 21***53 | Belt-Serpentine | 1 |
299-4729 Fan Gp-Suction -Without Air Conditioner
| 13***81 | Spacer | 1 |
| 14***91 | Spider As; (9-Blade) | 1 |
| 24***51 | Guard As | 1 |
299-4716 Fan Gp-Suction -With Air Conditioner
| 13***81 | Spacer | 1 |
| 14***91 | Spider As; (9-Blade) | 1 |
| 21***53 | Belt-Serpentine | 1 |
315-1369 Lines Gp-Power Train Cooler
| 11***86 | Bracket As | 1 |
| 13***84 | Clip | 1 |
| 14***39 | Connector As. | 1 |
304-4022 Lines Gp-Radiator
| 03***44 | Clip | 2 |
| 14***40 | Plate | 2 |
| 24***85 | Tank Group-Expansion; (Coolant) | 1 |
230-7355 Pump Gp-Water
| 10***51 | Bolt; (M8x1.25x65-mm) | 5 |
| 11***29 | Bolt; (M8x1.25x75-mm) | 2 |
| 22***38 | Seal-O-Ring | 1 |
315-3411 Pump Gp-Water
| 10***51 | Bolt; (M8x1.25x65-mm) | 5 |
| 11***29 | Bolt; (M8x1.25x75-mm) | 2 |
| 22***38 | Seal-O-Ring | 1 |
309-9106 Radiator & Hyd Oil Cooler Gp
| 12***65 | Rivet-Pop | 16 |
| 30***23 | Radiator & Hydraulic Oil Cooler Group; -Includes Aftclr, Xmsn Cooler | 1 |
| 30***18 | Baffle; (Lower) | 1 |
304-4023 Radiator & Hyd Oil Cooler Gp -Includes Aftclr, Xmsn Cooler
| 14***50 | Seal; (1.2-cm Each) | 0 |
| 17***94 | Bolt; (M8x1.25x16-mm) | 4 |
| 17***36 | Nut-Hex Flange; (M8x1.25-Thd)(M8x1.25) | 4 |
309-9105 Radiator & Hyd Oil Cooler Gp
| 12***65 | Rivet-Pop | 16 |
| 21***47 | Baffle; (Lower) | 1 |
| 29***33 | Radiator & Hydraulic Oil Cooler Group | 1 |
297-3233 Radiator & Hyd Oil Cooler Gp
| 22***87 | Valve Group-Radiator Drain | 1 |
| 29***33 | Radiator & Hydraulic Oil Cooler Group | 1 |
| 29***46 | Cooler Group-Hydraulic & Xmsn Oil | 1 |
324-6213 Tank & Lines Gp-Coolant -Expansion, Radiator
| 03***44 | Clip | 2 |
| 14***40 | Plate | 2 |
| 21***39 | Hose-Radiator; (Lower) | 1 |
Electrical And Starting System
317-9776 Alternator Gp-Charging
| 11***49 | Nut; (M12-1.75x93-mm-Thd) | 1 |
| 14***83 | Bolt; (M10x1.5x45-mm)(Starter Motor) | 2 |
| 16***20 | Pin | 1 |
334-3756 Alternator Gp-Charging
| 10***51 | Bolt; (M8x1.25x130-mm) | 1 |
| 11***49 | Nut; (M12-1.75x93-mm-Thd) | 1 |
| 14***83 | Bolt; (M10x1.5x45-mm)(Starter Motor) | 2 |
313-3379 Battery & Wiring Gp
| 03***17 | Tread-Nonskid | 1 |
| 09***35 | Spacer; (11x25x20-mm Thk) | 2 |
| 12***73 | Cap As-Filler; (Battery) | 6 |
228-5087 Battery Gp -Heavy-Duty
| 03***17 | Tread-Nonskid | 1 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 1 |
| 1S***52 | Terminal-Cable; (00-Ga, 3/8-In Screw) | 1 |
3e-7843 Control Gp-Position
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 3E***43 | Control Group-Bucket Positioner; (Bucket Positioner) | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
225-8017 Electronics Gp-Machine
| 22***17 | Electronics Group-Machine | 1 |
| 30***91 | Control Group-Unprogrammed; (Transmission) | 1 |
| 33***07 | Software Group-Machine | 1 |
325-5950 Electronics Gp-Machine
| 30***91 | Control Group-Unprogrammed; (Transmission) | 1 |
| 32***50 | Electronics Group-Machine | 1 |
| 35***31 | Software Group-Machine | 1 |
315-3418 Glow Plug Gp
| 23***62 | Glow Plug; (12-Volt) | 4 |
| 28***80 | Bus Bar As | 1 |
| 31***18 | Glow Plug Group | 1 |
232-6661 Glow Plug Gp
| 23***26 | Clip | 1 |
| 23***61 | Glow Plug Group | 1 |
| 23***62 | Glow Plug; (12-Volt) | 4 |
248-2215 Heater Gp-Jacket Water
| 23***58 | Heater Group-Jacket Water | 1 |
| 24***15 | Heater Group-Jacket Water | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
231-3058 Heater Gp-Jacket Water
| 13***13 | Kit-Seal; (Water Jacket) | 1 |
| 13***17 | Cap As-Dust | 1 |
| 21***71 | Element As-Jacket Water Heater; (240-Volt, 1000-Watt) | 1 |
328-1485 Installation Gp-Security -Machine Security System
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
322-3037 Installation Gp-Security
| 20***45 | Strap-Cable | 2 |
| 22***27 | Film-Instruction; (Machine Security, Read Omm) | 2 |
| 26***05 | Bracket As | 1 |
328-2481 Installation Gp-Security -Turbo
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 20***14 | Lens As; (Floodlight) | 1 |
| 23***30 | Body As; (Floodlight) | 1 |
307-9651 Installation Gp-Security
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
326-7959 Installation Gp-Security
| 13***54 | Screw-Truss Head; (M4x0.7x10-mm) | 4 |
| 1P***78 | Clamp; (Hose) | 3 |
| 26***86 | Fitting-Coupling | 2 |
234-4329 Lamp Gp-Flood
| 10***53 | Case, Spacer; (Spherical) | 1 |
| 10***54 | Spacer; (Spherical) | 1 |
| 10***55 | Washer; (Spherical) | 1 |
234-4328 Lamp Gp-Flood
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 20***11 | Lens As | 1 |
| 23***28 | Lamp Group-Flood; -Front, Rear, Wide Range | 1 |
195-0190 Lamp Gp-Head & Signal -Lh-High, Low Beam
| 10***53 | Case, Spacer; (Spherical) | 1 |
| 10***54 | Spacer; (Spherical) | 1 |
| 10***55 | Washer; (Spherical) | 1 |
195-0189 Lamp Gp-Head & Signal -Rh-High, Low Beam
| 10***53 | Case, Spacer; (Spherical) | 1 |
| 10***54 | Spacer; (Spherical) | 1 |
| 10***55 | Washer; (Spherical) | 1 |
195-0192 Lamp Gp-Head & Signal -Lh-High, Low Beam
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 19***92 | Lamp Group-Head & Signal; -Lh-High, Low Beam | 1 |
195-0191 Lamp Gp-Head & Signal -Rh-High, Low Beam
| 10***53 | Case, Spacer; (Spherical) | 1 |
| 10***54 | Spacer; (Spherical) | 1 |
| 10***55 | Washer; (Spherical) | 1 |
196-0030 Lamp Gp-Registration Plate
| 19***30 | Lamp Group-Registration Plate | 1 |
| 1H***38 | Lockwasher, External Tooth (1/4); W/O Freespool Qty Is 6 | 2 |
| 4S***88 | Terminal; (Blade-Crimp Type)(Male) | 2 |
220-8698 Lamp Gp-Roading -Fog; Red, Rear
| 09***92 | Lamp Group-Stop & Tail | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 22***98 | Lamp Group-Roading; -Fog; Red, Rear | 1 |
092-2992 Lamp Gp-Stop & Tail
| 09***92 | Lamp Group-Stop & Tail | 1 |
| 27***00 | Lens; (Amber)(Warning Beacon) | 1 |
| 9R***42 | Plug As | 1 |
9r-2385 Lamp Gp-Stop & Tail
| 09***79 | Lens; (Stop/Turn Signal) | 1 |
| 3C***81 | Nut | 4 |
| 3C***82 | Screw | 4 |
309-1325 Lamp Gp-Warning Beacon -Amber
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 21***98 | Switch As-Rocker; (Floodlights, Front) | 1 |
| 21***00 | Switch As-Rocker; (Floodlights, Rear) | 1 |
323-4257 Lighting Gp-Flood
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 2 |
310-2344 Lighting Gp-Registration Plate
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 20***20 | Strap-Cable | 2 |
323-5162 Lighting Gp-Roading -Dipped, Lh
| 03***44 | Clip | 2 |
| 30***25 | Lamp Group-Warning Beacon; -12-Volt, Amber | 2 |
| 32***62 | Lighting Group-Roading; -Dipped, Lh | 1 |
323-5161 Lighting Gp-Roading -Dipped, Rh
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 19***91 | Lamp Group-Head & Signal; -Rh-High, Low Beam | 1 |
| 19***92 | Lamp Group-Head & Signal; -Lh-High, Low Beam | 1 |
310-2342 Lighting Gp-Roading -Fog
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 19***89 | Lamp Group-Head & Signal; -Rh-High, Low Beam | 1 |
| 19***90 | Lamp Group-Head & Signal; -Lh-High, Low Beam | 1 |
211-4272 Lighting Gp-Warning -Beacon
| 03***44 | Clip | 2 |
| 21***72 | Lighting Group-Warning; -Beacon | 1 |
| 30***25 | Lamp Group-Warning Beacon; -12-Volt, Amber | 1 |
211-4291 Lighting Gp-Warning Beacon -Amber, Magnetic Mount, Rotating
| 1H***44 | Lockwasher (Bracket To Cab) | 2 |
| 21***91 | Lighting Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 26***11 | Seal | 1 |
295-5903 Relay Gp -Stabilizer, Auto Up
| 1H***44 | Lockwasher (Bracket To Cab) | 2 |
| 26***11 | Seal | 1 |
| 26***13 | Cover | 1 |
276-7291 Relay Gp -Power, 2
| 17***03 | Relay As-Timer; (Stabilizer, Auto Up, 12-Volt) | 1 |
| 27***91 | Relay Group; -Power, 2 | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 1 |
276-7287 Relay Gp -Power Distribution
| 1H***44 | Lockwasher (Bracket To Cab) | 2 |
| 26***01 | Fuse; (60-Ampere)(Power, 1) | 2 |
| 26***11 | Seal | 1 |
276-7290 Relay Gp -Power, 1
| 1H***44 | Lockwasher (Bracket To Cab) | 2 |
| 26***01 | Fuse; (60-Ampere)(Power, 1) | 1 |
| 26***11 | Seal | 1 |
322-6827 Relay Gp -Starting Motor
| 10***85 | Cap-Starting Motor | 1 |
| 10***12 | Kit-Contact; (Starting Motor) | 1 |
| 10***13 | Switch As; (Starting Motor)(12-Volt) | 1 |
303-5769 Starting Motor Gp-Electric -12-Volt
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***39 | Relay As | 1 |
| 21***92 | Switch As-Rocker; (All Wheel Drive) | 1 |
143-0539 Starting Motor Gp-Electric -12-Volt
| 14***39 | Starting Motor Group-Electric; -12-Volt | 2 |
| 6I***64 | Stud; (M10x1.5x30-mm) | 3 |
| 6I***94 | Nut; (M10x1.15-Thd) | 3 |
237-0024 Starting Motor Gp-Electric -12-Volt
| 23***24 | Starting Motor Group-Electric; -12-Volt | 1 |
| 30***95 | Starting Motor-Electric | 1 |
| 6I***64 | Stud; (M10x1.5x30-mm) | 3 |
305-3295 Switch Gp-All Wheel Drive -Includes Relay
| 20***59 | Boot | 1 |
| 20***17 | Bracket As | 1 |
| 20***75 | Switch As-Foot; (Differential Lock On, Off) | 1 |
308-9973 Switch Gp-Differential Lock
| 19***67 | Seal-O-Ring | 1 |
| 23***94 | Switch As-Pressure; (Engine Oil) | 1 |
| 30***73 | Switch Group-Differential Lock | 1 |
237-4896 Switch Gp-Pressure
| 03***63 | Plug | 1 |
| 19***67 | Seal-O-Ring | 1 |
| 22***41 | Plug | 1 |
316-6925 Switch Gp-Pressure -Engine Oil
| 14***39 | Relay As | 1 |
| 17***50 | Alarm As; (Backup) | 1 |
| 31***25 | Switch Group-Pressure; -Engine Oil | 1 |
295-5901 Warning Gp-Backup
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 7 |
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 2 |
| 10***74 | Seal-Connector | 2 |
310-2336 Wiring Gp-Air Conditioner
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
295-5892 Wiring Gp-Communication
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 48 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
310-2350 Wiring Gp-Console -Side
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 3 |
| 13***04 | Switch As-Pressure; (Power Train Oil Filter Bypass) | 1 |
310-2332 Wiring Gp-Engine
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
263-9483 Wiring Gp-Engine
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 4 |
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 2 |
| 10***74 | Seal-Connector | 2 |
310-5613 Wiring Gp-Heater
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
| 16***46 | Sleeve-Abrasion; (28.2-In Each) | 0 |
| 16***90 | Plate | 2 |
295-5902 Wiring Gp-Kickout & Positioner
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
310-2356 Wiring Gp-Lighting -Roof
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***15 | Relay As; (12-Volt)(Junction Box) | 2 |
323-0992 Wiring Gp-Load Control
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 47 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***74 | Seal-Connector | 2 |
310-2346 Wiring Gp-Platform
| 17***39 | Receptacle As; (Power Supply) | 1 |
| 31***46 | Wiring Group-Platform | 1 |
211-4271 Wiring Gp-Power Receptacle
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***04 | Suppressor As-Arc | 2 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
310-2338 Wiring Gp-Rear
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
323-0991 Wiring Gp-Ride Control
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 10 |
| 09***35 | Spacer; (11x25x20-mm Thk) | 1 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 1 |
305-4171 Wiring Gp-Ride Control
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
246-8056 Wiring Gp-Ride Control
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
211-4259 Wiring Gp-Ride Control
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
310-2354 Wiring Gp-Steering -All Wheel Steer
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 4 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***80 | Bolt-Socket Head; (M5x0.8x16-mm)(European Sourced) | 2 |
310-2352 Wiring Gp-Transmission Control -Powershift
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 14***61 | Tape; (3-M) | 0 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
311-3639 Wiring Gp-Wiper -Rear
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
211-4258 Wiring Gp-Work Tool -Angle Broom
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 16 |
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 2 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
296-0376 Wiring Gp-Work Tool
| 15***44 | Plug As-Drain; (Magnetic)(Final Drive Planetary) | 3 |
| 15***04 | Bearing | 2 |
| 19***11 | Dowel | 2 |
Engine Arrangement
308-2344 Engine Ar
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***77 | Plug As; (2-Pin) | 1 |
| 17***22 | Seal | 2 |
308-2338 Engine Ar
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***77 | Plug As; (2-Pin) | 1 |
| 17***22 | Seal | 2 |
308-2342 Engine Ar
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***77 | Plug As; (2-Pin) | 1 |
| 17***22 | Seal | 2 |
308-2340 Engine Ar
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***77 | Plug As; (2-Pin) | 1 |
| 17***22 | Seal | 2 |
321-7705 Engine Ar-Primary
| 29***12 | Pump Group-Engine Oil | 1 |
| 29***29 | Plug Group-Cylinder Head | 1 |
| 29***31 | Plug Group-Engine | 1 |
322-1924 Engine Ar-Primary
| 22***17 | Plug Group-Engine | 1 |
| 23***00 | Flywheel Group | 1 |
| 23***55 | Pump Group-Water | 1 |
Frame And Body
321-2555 Box Gp-Battery
| 21***54 | Counterweight; (115-Kg (250-Lb)) | 1 |
| 32***55 | Box Group-Battery | 1 |
| 8C***90 | Bolt; (M24x3.0x150mm) | 2 |
211-3649 Counterweight Gp
| 21***49 | Counterweight Group | 1 |
| 33***36 | Cover | 1 |
| 7X***29 | Washer; (11x25x3-mm Thk) | 4 |
339-6486 Cover Gp-Protection
| 24***26 | Extension-Fender; (Lh) | 1 |
| 24***27 | Extension-Fender; (Rh) | 1 |
| 25***89 | Washer-Hard; (7.2x14.5x2-mm Thk) | 20 |
249-9325 Extension Gp-Fender
| 24***39 | Bracket As; (Lh) | 1 |
| 24***43 | Fender; (Lh) | 1 |
| 24***44 | Fender; (Rh) | 1 |
249-3837 Fender Gp-Front
| 24***37 | Fender Group-Front | 1 |
| 24***39 | Bracket As; (Lh) | 1 |
| 24***43 | Fender; (Lh) | 1 |
301-0989 Fender Gp-Front
| 11***63 | Clip-Spring | 1 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 1 |
| 15***83 | Washer-Hard; (8.4x35x2.5-mm Thk) | 22 |
211-3782 Fender Gp-Rear
| 21***82 | Fender Group-Rear | 1 |
| 22***46 | Plate As | 1 |
| 23***65 | Plate As | 1 |
206-1831 Floorplate Gp
| 20***31 | Floorplate Group | 1 |
| 21***58 | Frame Group-Sliding | 1 |
| 31***99 | Frame Group-Loader | 1 |
311-9004 Frame Ar-Loader -Sideshift
| 19***81 | Pad | 8 |
| 19***83 | Pad | 2 |
| 19***84 | Pad | 2 |
311-8999 Frame Gp-Loader
| 03***39 | Ring-Back-Up | 4 |
| 09***65 | Spacer; (17x40x3-mm Thk) | 8 |
| 09***81 | Spacer; (10.5x20x10.0mm Thk) | 1 |
247-0793 Frame Gp-Sliding
| 13***33 | Pin | 2 |
| 13***40 | Shim; (1-mm Thk) | 1 |
| 20***55 | Pin | 2 |
212-7458 Frame Gp-Sliding
| 10***06 | Bolt; (M30x3.5x150-mm) | 2 |
| 11***33 | Bolt-Hex Head; (M24x3x160mm) | 4 |
| 21***58 | Frame Group-Sliding | 1 |
209-6860 Frame Gp-Swing
| 20***60 | Frame Group-Swing | 1 |
254-2463 Grill-Radiator -Screen
| 23***46 | Guard As | 1 |
| 25***63 | Grill-Radiator; -Screen | 1 |
| 29***47 | Bolt-Carriage; (M16x2x40-mm) | 4 |
231-8945 Guard Gp-Drive Shaft
| 23***45 | Guard Group-Drive Shaft | 1 |
| 23***60 | Guard As | 2 |
| 8T***89 | Bolt (20mm Long) 0 Degrees); (L=20mm) {For 5br, 6cr} | 4 |
234-2855 Guard Gp-Lighting
| 21***36 | Guard As | 2 |
| 23***55 | Guard Group-Lighting | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 4 |
216-1225 Guard Gp-Lines
| 21***25 | Guard Group-Lines | 1 |
| 25***23 | Cover | 1 |
| 7X***72 | Bolt; (M24x3x35-mm) | 2 |
256-0324 Guard Gp-Radiator
| 23***64 | Enclosure As; (Rh) | 1 |
| 25***32 | Cowling As | 1 |
| 25***33 | Cowling | 1 |
311-8061 Hood & Guard Gp
| 25***78 | Film-Identification; (Cat) | 1 |
| 25***30 | Film-Stripe; (Yellow) | 1 |
| 25***50 | Bracket As | 2 |
299-3141 Hood Gp-Engine
| 25***81 | Spring As-Gas; (Rh) | 1 |
| 25***01 | Spring As-Gas; (Lockable)(Lh) | 1 |
| 27***01 | Kit-Gas Spring | 1 |
311-8055 Hood Gp-Engine
| 31***55 | Hood Group-Engine | 1 |
| 9R***04 | Reflector-Amber | 4 |
320-8640 Liner Gp-Sound Suppression
| 26***23 | Step | 1 |
| 32***40 | Liner Group-Sound Suppression | 1 |
| 8T***26 | Clamp-Hose | 2 |
152-0184 Reflector Gp -Side Shift
| 15***84 | Reflector Group; -Side Shift | 1 |
269-8456 Step Gp
| 26***56 | Step Group | 1 |
Fuel System
206-1640 Control Gp-Governor
| 11***25 | Screw-Flat Head; (M6x1x25-mm) | 3 |
| 15***41 | Block | 3 |
| 16***95 | Knob | 1 |
130-7092 Filter Gp-Water Sep & Fuel
| 11***18 | Ring-Retaining | 1 |
| 11***19 | Nut | 1 |
| 12***80 | Kit-Water Base; (Water Separator) | 1 |
287-3923 Filter Gp-Water Sep & Fuel
| 13***92 | Filter Group-Water Sep & Fuel | 1 |
| 15***75 | Connector | 2 |
| 16***61 | Plug As | 2 |
310-4590 Lines Gp-Fuel
| 15***41 | Block | 1 |
| 1P***78 | Clamp; (Hose) | 14 |
| 21***15 | Connector-Hose; -Fuel Lines | 2 |
310-4766 Lines Gp-Fuel
| 15***41 | Block | 1 |
| 1P***78 | Clamp; (Hose) | 10 |
| 21***15 | Connector-Hose; -Fuel Lines | 1 |
326-9012 Lines Gp-Fuel
| 03***17 | Union | 1 |
| 06***64 | Fitting-Flared | 1 |
| 06***65 | Fitting-Brass | 1 |
247-4885 Lines Gp-Fuel Filter
| 23***26 | Clip | 1 |
| 24***84 | Tube As | 1 |
| 24***85 | Lines Group-Fuel Filter | 1 |
236-8228 Pump Gp-Fuel Injection
| 15***68 | Seal-O-Ring | 1 |
| 17***19 | Valve Group-Solenoid; (12-Volt)(Fuel Shutoff) | 1 |
| 19***61 | Cable As-Adapter; (Fuel Shutoff Solenoid) | 1 |
326-9147 Pump Gp-Fuel Injection
| 11***22 | Nut | 1 |
| 11***23 | Washer | 1 |
| 15***68 | Seal-O-Ring | 1 |
326-9149 Pump Gp-Fuel Injection
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
| 14***14 | Clip | 1 |
236-8229 Pump Gp-Fuel Injection
| 03***17 | Union | 1 |
| 06***64 | Fitting-Flared | 1 |
| 06***65 | Fitting-Brass | 1 |
314-6700 Pump Gp-Fuel Prm & Prim Filter -With Mounting
| 06***80 | Fitting | 1 |
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 2 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 2 |
249-7669 Pump Gp-Fuel Prm & Prim Filter -With Water Separator
| 11***18 | Ring-Retaining | 1 |
| 14***54 | Drain As; (Sensor) | 1 |
| 19***76 | Screw-Mounting | 1 |
310-3935 Tank Gp-Fuel
| 21***38 | Tread-Nonskid | 1 |
| 22***19 | Step As | 1 |
| 31***35 | Tank Group-Fuel | 1 |
310-3936 Tank Gp-Fuel
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***20 | Gasket | 1 |
| 18***82 | Screw-Pan Head; (M6x1x16-mm) | 13 |
Hydraulic System
226-0420 Accumulator Gp-Pilot Oil -Charged
| 15***06 | Valve-Gas | 1 |
| 16***96 | Service Kit; (Includes Seals) | 1 |
| 17***03 | Film-Warning; (Accum, High Press, Read Omm)(Plate-Name) | 1 |
230-3489 Accumulator Gp-Pilot Oil -Uncharged
| 16***60 | Accumulator Group-Ride Control; -Charged | 1 |
| 23***89 | Accumulator Group-Pilot Oil; -Uncharged | 1 |
162-3961 Accumulator Gp-Ride Control -Uncharged
| 16***61 | Accumulator Group-Ride Control; -Uncharged | 1 |
| 30***31 | Lines Group-Ride Control | 1 |
| 30***71 | Wiring Group-Ride Control | 1 |
162-3960 Accumulator Gp-Ride Control -Charged
| 16***60 | Accumulator Group-Ride Control; -Charged | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
| 22***32 | Cap; (Gas Valve) | 1 |
345-3674 Accumulator Gp-Ride Control -Uncharged
| 30***31 | Lines Group-Ride Control | 1 |
| 32***91 | Wiring Group-Ride Control | 1 |
| 34***74 | Accumulator Group-Ride Control; -Uncharged | 1 |
303-8536 Control Ar-Ride -Pilot Control
| 29***47 | Core As-Oil Cooler; (19 Plate) | 1 |
| 29***48 | Core As-Oil Cooler; (12 Plate) | 1 |
| 30***36 | Control Ar-Ride; -Pilot Control | 1 |
310-4640 Control Ar-Ride
| 21***46 | Core As-Oil Cooler; (Hydraulic)(18 Plate) | 1 |
| 30***49 | Core As-Oil Cooler; (Transmission) | 1 |
| 31***40 | Control Ar-Ride, Pipe | 1 |
304-7847 Cooler Gp-Hyd & Xmsn Oil
| 16***08 | Seal As-Buffer | 1 |
| 16***19 | Seal-U-Cup | 1 |
| 20***07 | Elbow | 1 |
299-4246 Cooler Gp-Hyd & Xmsn Oil
| 10***51 | Washer; (36.7x66x6-mm Thk) | 1 |
| 16***07 | Seal As-Buffer | 1 |
| 16***17 | Seal-U-Cup | 1 |
210-7096 Cylinder Gp-Backhoe Bucket
| 17***93 | Rod | 2 |
| 18***72 | Kit-Seal; (Coupler Cylinder) | 1 |
| 19***11 | Valve Group-Check; (Coupler Cylinder) | 1 |
246-9884 Cylinder Gp-Boom
| 10***82 | Washer; (11x19.5x2.5-mm Thk) | 1 |
| 14***49 | Seal-Piston | 1 |
| 16***83 | Seal As-Buffer | 1 |
190-3085 Cylinder Gp-Coupler
| 10***82 | Washer; (11x19.5x2.5-mm Thk) | 1 |
| 14***49 | Seal-Piston | 1 |
| 16***83 | Seal As-Buffer | 1 |
279-5556 Cylinder Gp-Hydraulic -Lh
| 23***57 | Kit-Seal; (Bucket Cylinder) | 1 |
| 27***56 | Cylinder Group-Hydraulic; -Lh | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 2 |
278-1971 Cylinder Gp-Hydraulic -Lh
| 16***00 | Seal Assem. | 1 |
| 16***07 | Seal-U-Cup | 1 |
| 17***79 | Bolt-Hex Head; (M24x3.0x80mm) | 1 |
269-0381 Cylinder Gp-Hydraulic -Rh
| 16***00 | Seal Assem. | 1 |
| 16***07 | Seal-U-Cup | 1 |
| 17***79 | Bolt-Hex Head; (M24x3.0x80mm) | 1 |
249-6713 Cylinder Gp-Lift -Rh
| 16***01 | Seal As-Buffer | 1 |
| 16***12 | Seal-U-Cup | 1 |
| 21***19 | Bearing-Sleeve | 2 |
249-6712 Cylinder Gp-Lift -Lh
| 12***51 | Cylinder As | 1 |
| 12***53 | Rod As | 1 |
| 15***49 | Head | 1 |
226-5540 Cylinder Gp-Multipurpose Bukt
| 16***86 | Seal As-Buffer | 1 |
| 16***94 | Seal-U-Cup | 1 |
| 17***79 | Bolt-Hex Head; (M24x3.0x80mm) | 1 |
173-4565 Cylinder Gp-Stabilizer
| 10***82 | Washer; (11x19.5x2.5-mm Thk) | 1 |
| 17***65 | Cylinder Group-Stabilizer; -Sideshift | 1 |
| 23***83 | Piston | 1 |
210-7098 Cylinder Gp-Stick -Extendable
| 16***98 | Seal As-Buffer | 1 |
| 16***05 | Seal-U-Cup | 1 |
| 17***79 | Bolt-Hex Head; (M24x3.0x80mm) | 1 |
210-7094 Cylinder Gp-Stick
| 10***82 | Washer; (11x19.5x2.5-mm Thk) | 1 |
| 21***94 | Cylinder Group-Stick | 1 |
| 23***83 | Piston | 1 |
278-1973 Cylinder Gp-Swing -Rh
| 11***18 | Plate | 1 |
| 11***34 | Adapter | 1 |
| 12***96 | Shaft Group-Pump Drive | 1 |
214-9372 Cylinder Gp-Tilt
| 21***72 | Cylinder Group-Tilt | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 3 |
| 8T***86 | Bolt-Plt; (M10 X 1.5 X 40) | 3 |
112-1826 Drive & Mtg Gp-Pump
| 11***26 | Drive & Mtg Group-Pump | 1 |
| 12***17 | Filter-Oil; (Ultra High Efficiency)(Hydraulic, Transmission) | 1 |
| 14***35 | Connect Group; (Each Includes) | 1 |
301-1042 Fastener Gp-Valve
| 10***01 | Fitting; (Quick Disconnect, Female) | 1 |
| 10***06 | Fitting; (Quick Disconnect, Male) | 1 |
| 30***42 | Fastener Group-Valve | 1 |
325-6257 Filter Gp-Oil
| 17***65 | Cylinder Group-Stabilizer; -Sideshift | 2 |
| 21***40 | Pump Group-Metering; -Hmu | 1 |
| 22***03 | Valve Ar-Bank 7 | 1 |
132-8769 Fitting Gp-Hydraulic -Quick Disconnect
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
| 13***69 | Fitting Group-Hydraulic; -Quick Disconnect | 1 |
| 16***16 | Ring-Backup | 1 |
308-2347 Hydraulic Ar
| 10***72 | Connector | 1 |
| 12***37 | Cap | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
279-4225 Kit-Auxiliary Lines -Extendable Stick
| 21***59 | Wiring Group-Ride Control | 1 |
| 25***20 | Lines Group-Ride Control | 1 |
| 27***25 | Kit-Auxiliary Lines; -Extendable Stick | 1 |
323-1632 Kit-Auxiliary Lines -Extendable Stick
| 24***56 | Wiring Group-Ride Control | 1 |
| 25***20 | Lines Group-Ride Control | 1 |
| 32***32 | Kit-Auxiliary Lines; -Extendable Stick | 1 |
348-0161 Kit-Ride Control
| 10***01 | Fitting; (Quick Disconnect, Female) | 2 |
| 10***06 | Fitting; (Quick Disconnect, Male) | 2 |
| 12***37 | Cap | 2 |
265-3754 Kit-Ride Control
| 09***66 | Bolt; (M8x1.25x75-mm) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
309-4334 Kit-Ride Control
| 14***28 | Connector Assem. | 4 |
| 14***41 | Connector Group | 8 |
| 14***08 | Plug As. | 6 |
265-3755 Kit-Ride Control
| 09***66 | Bolt; (M8x1.25x75-mm) | 2 |
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
309-4333 Kit-Ride Control
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
297-3104 Lines Gp-Backhoe
| 10***08 | Bracket; (Lh) | 1 |
| 10***09 | Connector | 1 |
| 10***72 | Connector | 1 |
300-6617 Lines Gp-Backhoe Auxiliary
| 10***01 | Fitting; (Quick Disconnect, Female) | 2 |
| 10***06 | Fitting; (Quick Disconnect, Male) | 2 |
| 12***37 | Cap | 2 |
274-1869 Lines Gp-Backhoe Auxiliary
| 10***08 | Bracket; (Lh) | 1 |
| 10***09 | Connector | 1 |
| 10***72 | Connector | 1 |
339-4793 Lines Gp-Backhoe Auxiliary -Extendable Stick
| 14***28 | Connector Assem. | 1 |
| 14***41 | Connector Group | 1 |
| 14***82 | Elbow As | 1 |
316-6277 Lines Gp-Backhoe Auxiliary
| 10***72 | Connector | 1 |
| 10***60 | Bracket; (Rh) | 2 |
| 12***37 | Cap | 2 |
316-6279 Lines Gp-Backhoe Auxiliary -Kit, Extendable Stick
| 14***41 | Connector Group | 2 |
| 14***82 | Elbow As | 1 |
| 14***14 | Reducer As | 1 |
323-1633 Lines Gp-Backhoe Auxiliary -Extendable Stick
| 14***25 | Connector As. | 3 |
| 14***41 | Connector Group | 3 |
| 14***82 | Elbow As | 1 |
309-4331 Lines Gp-Backhoe Auxiliary -Standard Stick
| 10***72 | Connector | 1 |
| 10***60 | Bracket; (Rh) | 2 |
| 12***37 | Cap | 2 |
309-4332 Lines Gp-Backhoe Auxiliary -Kit, Extendable Stick
| 10***72 | Connector | 1 |
| 12***37 | Cap | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
300-6619 Lines Gp-Backhoe Auxiliary
| 10***72 | Connector | 1 |
| 10***60 | Bracket; (Rh) | 2 |
| 12***37 | Cap | 2 |
300-6621 Lines Gp-Boom
| 14***28 | Connector Assem. | 1 |
| 14***41 | Connector Group | 3 |
| 14***82 | Elbow As | 1 |
300-6612 Lines Gp-Boom
| 14***28 | Connector Assem. | 1 |
| 14***41 | Connector Group | 3 |
| 14***82 | Elbow As | 1 |
316-6278 Lines Gp-Bucket
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
| 20***26 | Hose As | 1 |
| 26***14 | Plate As | 1 |
320-9942 Lines Gp-Bucket
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
| 18***25 | Hose As | 1 |
| 32***42 | Lines Group-Bucket | 1 |
300-6615 Lines Gp-Bucket
| 16***73 | Valve Group-Shutoff | 1 |
| 30***15 | Lines Group-Bucket | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
300-6614 Lines Gp-Bucket
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
| 15***60 | Tee As | 2 |
| 15***17 | Cap-Dust | 1 |
216-5332 Lines Gp-Drain
| 14***41 | Connector Group | 1 |
| 14***82 | Elbow As | 1 |
| 15***41 | Block | 2 |
297-3105 Lines Gp-Extendable Stick
| 20***39 | Adapter | 2 |
| 29***05 | Lines Group-Extendable Stick | 1 |
| 29***59 | Hose As | 2 |
331-0097 Lines Gp-Extendable Stick
| 11***39 | Hose As | 2 |
| 12***09 | Tee | 1 |
| 14***77 | Plate As | 1 |
247-3268 Lines Gp-Extendable Stick
| 11***83 | Boss; (M10x1.5-Thd) | 1 |
| 14***67 | Plate As | 2 |
| 14***15 | Connector As | 2 |
301-2897 Lines Gp-Hydraulic
| 11***83 | Boss; (M10x1.5-Thd) | 1 |
| 14***67 | Plate As | 2 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
347-0829 Lines Gp-Hydraulic -Advanced Grading
| 10***87 | Tee As | 1 |
| 12***13 | Tee-O-Ring | 1 |
| 14***25 | Connector As. | 1 |
300-5824 Lines Gp-Hydraulic
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***09 | Tee | 1 |
| 14***45 | Connector As | 2 |
300-5822 Lines Gp-Lift Cylinder
| 14***25 | Connector As. | 8 |
| 16***48 | Sleeve-Abrasion | 0 |
| 19***60 | Marker; (Beige, L1) | 2 |
301-2896 Lines Gp-Load Control Valve
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 13***13 | Band; (Marker) (Gray, P) | 2 |
| 14***25 | Connector | 1 |
317-6280 Lines Gp-Multipurpose Bucket
| 14***25 | Connector As. | 6 |
| 14***68 | Elbow Group | 1 |
| 15***33 | Elbow, 45°,-6 Orb /-4 Orfs | 1 |
299-6857 Lines Gp-Pilot -Stabilizer
| 09***35 | Spacer; (11x25x20-mm Thk) | 2 |
| 13***84 | Clip | 1 |
| 15***03 | Clamp-Hose | 4 |
299-6858 Lines Gp-Pilot
| 09***66 | Bolt; (M8x1.25x75-mm) | 2 |
| 10***33 | Clip; (Slot) | 2 |
| 10***34 | Clip; (Tab) | 2 |
298-5955 Lines Gp-Pilot -Signal
| 14***67 | Clamp; (Hose) | 1 |
| 14***17 | Adapter, -12 Orb / -16 Orfs | 1 |
| 14***35 | Connect Group; (Each Includes) | 2 |
299-6859 Lines Gp-Pilot -Auxiliary
| 09***66 | Bolt; (M8x1.25x75-mm) | 2 |
| 10***33 | Clip; (Slot) | 2 |
| 10***34 | Clip; (Tab) | 2 |
298-5349 Lines Gp-Pump
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 3 |
| 14***34 | Tee As-Orfs | 1 |
315-2344 Lines Gp-Return
| 14***28 | Connector Assem. | 4 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***45 | Connector As | 2 |
303-2931 Lines Gp-Ride Control
| 14***28 | Connector Assem. | 1 |
| 14***41 | Connector Group | 1 |
| 15***32 | Elbow As | 1 |
257-3920 Lines Gp-Ride Control
| 14***28 | Connector Assem. | 4 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***45 | Connector As | 2 |
298-6986 Lines Gp-Sideshift Lock
| 11***73 | Adapter | 1 |
| 14***25 | Connector As. | 2 |
| 14***28 | Connector Assem. | 1 |
298-6987 Lines Gp-Stabilizer
| 12***47 | Elbow | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 4 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 2 |
300-6613 Lines Gp-Stick
| 14***41 | Connector Group | 2 |
| 14***45 | Connector As | 2 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
300-6623 Lines Gp-Stick
| 12***13 | Tee-O-Ring | 1 |
| 13***13 | Band; (Marker) (Gray, P) | 6 |
| 14***18 | Connector As | 1 |
298-6985 Lines Gp-Swing
| 12***51 | Kit-Seal; (Pressure Relief Valve) | 1 |
| 17***68 | Valve Group-Check; (Reversing Fan) | 1 |
| 18***54 | Valve Group-Solenoid; -Auxiliary | 4 |
301-2898 Lines Gp-Tilt Cylinder
| 10***08 | Kit-Seal; (Solenoid Valve, Quick Steer) | 1 |
| 24***66 | Valve Group-Solenoid; (High Flow Boost) | 2 |
| 25***48 | Coil As; (24-Volt) | 1 |
300-5823 Lines Gp-Tilt Cylinder
| 18***54 | Valve Group-Solenoid; -Auxiliary | 2 |
| 30***23 | Lines Group-Tilt Cylinder | 1 |
298-5401 Manifold & Lines Gp-Control -With Accumulator
| 22***84 | Valve Group-Relief; (Load Sensing Signal) | 1 |
| 22***85 | Valve Group-Flow Control; (Auxiliary, Inlet) | 1 |
| 22***97 | Filter-Oil; (Flow Regulator) | 1 |
300-4493 Manifold & Solenoid Gp-Control
| 25***77 | Kit-Cartridge | 1 |
| 25***78 | Coil As | 1 |
| 30***93 | Manifold & Solenoid Group-Control | 1 |
244-6735 Manifold Gp-Control -2-Way, Proportional
| 11***42 | Seal-O-Ring | 1 |
| 12***50 | Seal-O-Ring | 1 |
| 16***49 | Seal-O-Ring; (12.42mm Id) | 1 |
308-2156 Manifold Gp-Control -Inlet
| 30***56 | Manifold Group-Control; -Inlet, . Gear; Sun | 1 |
| 3B***17 | Cotter; (Pin) | 4 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 4 |
319-2156 Manifold Gp-Control -Sideshift, Auxiliary
| 09***50 | Ring-Retaining | 2 |
| 21***18 | Pin | 1 |
| 21***28 | Pin As | 1 |
308-2154 Manifold Gp-Control -Outlet
| 30***54 | Manifold Group-Control; -Outlet | 1 |
| 32***08 | Bracket As | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 3 |
308-2147 Manifold Gp-Control -Inlet
| 14***88 | Kit-Seal; (Ride Control, Switch) | 1 |
| 22***09 | Kit-Seal; (Accumulator) | 1 |
| 23***28 | Coil As | 1 |
300-4491 Manifold Gp-Control -Sideshift
| 18***54 | Valve Group-Solenoid; -Auxiliary | 2 |
| 22***98 | Valve Group-Solenoid | 2 |
| 25***30 | Kit-Seal; (Valve) | 1 |
245-8780 Manifold Gp-Ride Control
| 24***80 | Manifold Group-Ride Control | 1 |
| 3B***17 | Cotter; (Pin) | 4 |
| 9R***77 | Pin | 2 |
245-8767 Mounting Gp-Bank Valve
| 24***67 | Mounting Group-Bank Valve | 1 |
| 24***77 | Plate | 2 |
| 30***30 | Block | 2 |
9r-4668 Mounting Gp-Cylinder -Multipurpose Bucket
| 24***77 | Plate | 2 |
| 30***30 | Block | 2 |
| 30***51 | Block | 2 |
209-9939 Mounting Gp-Cylinder -Extendable Stick
| 03***28 | Seal-O-Ring | 1 |
| 03***43 | Seal-O-Ring | 2 |
| 15***06 | Seal-O-Ring; (11.89mm Id) | 1 |
337-8935 Mounting Gp-Cylinder -Multipurpose Bucket
| 12***24 | Plate-Valve | 1 |
| 19***26 | Barrel | 1 |
| 33***35 | Mounting Group-Cylinder; -Multipurpose Bucket | 1 |
246-9309 Mounting Gp-Lines
| 12***71 | Clamp-Hose | 1 |
| 13***56 | Seal-O-Ring | 1 |
| 1P***78 | Clamp; (Hose) | 3 |
289-6370 Pump Gp-Piston
| 25***95 | Gauge-Sight; (Hydraulic Oil Level) | 1 |
| 28***70 | Pump Group-Piston | 1 |
6e-4006 Rotating Gp-Pump
| 09***81 | Spacer; (10.5x20x10.0mm Thk) | 4 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
128-5596 Shaft Gp-Pump Drive
| 09***81 | Spacer; (10.5x20x10.0mm Thk) | 4 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
324-5929 Tank & Mtg Gp-Hydraulic
| 09***81 | Spacer; (10.5x20x10.0mm Thk) | 4 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
245-8778 Tank Gp-Hydraulic
| 14***25 | Connector As. | 2 |
| 14***45 | Connector As | 2 |
| 14***68 | Elbow Group | 3 |
319-2163 Valve & Lines Gp-Control -Kit, Power Sdshft, 8th Fctn
| 21***83 | Mounting Group-Bucket | 1 |
| 29***02 | Valve Group-Bank 3 | 1 |
| 30***22 | Lines Group-Lift Cylinder | 1 |
319-2161 Valve & Lines Gp-Control -Kit, Auxiliary, 8th Function
| 14***25 | Connector | 1 |
| 14***25 | Connector As. | 17 |
| 14***68 | Elbow Group | 2 |
319-2162 Valve & Lines Gp-Control -Kit, Power Sideshift Function
| 14***08 | Plug As. | 2 |
| 21***83 | Mounting Group-Bucket | 1 |
| 29***02 | Valve Group-Bank 3 | 1 |
319-2164 Valve & Lines Gp-Control -Kit, Auxiliary, 9th Function
| 21***82 | Coupler Group-Quick | 1 |
| 28***43 | Film-Warning; (Quick Coupler) | 1 |
| 29***02 | Valve Group-Bank 3 | 1 |
298-5402 Valve & Lines Gp-Pilot -Backhoe
| 21***83 | Mounting Group-Bucket | 1 |
| 29***02 | Valve Group-Bank 3 | 1 |
| 29***02 | Valve & Lines Group-Pilot; -Backhoe | 1 |
230-5030 Valve Ar-Bank 2
| 21***82 | Coupler Group-Quick | 1 |
| 23***30 | Valve Ar-Bank 2 | 1 |
| 28***43 | Film-Warning; (Quick Coupler) | 1 |
326-4618 Valve Ar-Bank 3 -Load Control
| 30***47 | Manifold Group-Control; -Inlet | 1 |
| 30***48 | Valve Group-Control; -Stabilizer, . Gear; Planetary | 2 |
| 30***49 | . Gear; Sun, Valve Group-Control; -Boom | 1 |
230-5032 Valve Ar-Bank 3
| 14***08 | Plug As. | 2 |
| 23***32 | Valve Ar-Bank 3 | 1 |
| 24***67 | Mounting Group-Bank Valve | 1 |
230-5034 Valve Ar-Bank 3
| 23***34 | Valve Ar-Bank 3 | 1 |
| 30***56 | Manifold Group-Control; -Inlet, . Gear; Sun | 1 |
| 30***57 | Valve Group-Control; -Lift | 1 |
326-4619 Valve Ar-Bank 3 -Quick Coupler, Load Control
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
| 30***72 | Valve Group-Check; (Stabilizer Control) | 1 |
| 30***73 | Kit-Cover; (Control Valve) | 1 |
229-7203 Valve Ar-Bank 7
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
| 12***50 | Seal-O-Ring | 1 |
| 16***16 | Ring-Backup | 1 |
293-8702 Valve Gp-Bank 3
| 12***50 | Seal-O-Ring | 1 |
| 25***33 | Valve Group-Check; (Stick Control Valve) | 1 |
| 29***02 | Valve Group-Bank 3 | 1 |
293-8701 Valve Gp-Bank 7
| 12***50 | Seal-O-Ring | 1 |
| 25***33 | Valve Group-Check; (Stick Control Valve) | 1 |
| 29***01 | Valve Group-Bank 7 | 1 |
308-2158 Valve Gp-Control -Tilt
| 25***27 | Film-Instruction; (Stabilizer, Sideshift) | 1 |
| 29***94 | Valve Group-Pilot; -Stabilizer | 1 |
| 30***58 | Valve Group-Control; -Tilt | 1 |
308-2148 Valve Gp-Control -Stabilizer
| 12***50 | Seal-O-Ring | 1 |
| 25***33 | Valve Group-Check; (Stick Control Valve) | 1 |
| 30***48 | Valve Group-Control; -Stabilizer, . Gear; Planetary | 1 |
308-2149 Valve Gp-Control -Boom
| 12***50 | Seal-O-Ring | 1 |
| 25***33 | Valve Group-Check; (Stick Control Valve) | 1 |
| 30***49 | . Gear; Sun, Valve Group-Control; -Boom | 1 |
308-2153 Valve Gp-Control -E-Family, Stick
| 30***53 | Valve Group-Control; -E-Family, Stick | 1 |
308-2152 Valve Gp-Control -Stick
| 12***50 | Seal-O-Ring | 1 |
| 25***33 | Valve Group-Check; (Stick Control Valve) | 1 |
| 30***52 | Valve Group-Control; -Stick | 1 |
308-2151 Valve Gp-Control -Bucket
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
| 12***50 | Seal-O-Ring | 1 |
| 16***16 | Ring-Backup | 1 |
308-2159 Valve Gp-Control -Auxiliary
| 25***29 | Film-Identification; (Stabilizer, Auto Up) | 1 |
| 29***03 | Relay Group; -Stabilizer, Auto Up | 1 |
| 29***95 | Valve Group-Pilot; -Stabilizer | 1 |
308-2150 Valve Gp-Control -Swing
| 12***50 | Seal-O-Ring | 1 |
| 25***33 | Valve Group-Check; (Stick Control Valve) | 1 |
| 30***50 | Valve Group-Control; -Swing | 1 |
308-2157 Valve Gp-Control -Lift
| 30***57 | Valve Group-Control; -Lift | 1 |
| 31***58 | Valve Group-Control; (Sideshift, Auxiliary) | 1 |
308-3437 Valve Gp-Load Control -Stabilizer
| 19***98 | Boot | 2 |
| 19***16 | Kit-Switch; (Pilot Vavle) | 2 |
| 30***36 | Kit-Spring | 1 |
319-2155 Valve Gp-Main Control
| 19***98 | Boot | 2 |
| 19***05 | Kit-Coil; (Pilot Valve) | 2 |
| 19***16 | Kit-Switch; (Pilot Vavle) | 2 |
297-4395 Valve Gp-Pilot -Stabilizer
| 09***50 | Ring-Retaining | 2 |
| 11***37 | Washer; (46x70x1-mm Thk)(1mm`Thk) | 12 |
| 11***25 | Bearing-Sleeve; (45.198mm Id) | 4 |
297-4394 Valve Gp-Pilot -Stabilizer
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 21***50 | Solenoid As; (Remote Control) | 1 |
253-1055 Valve Gp-Pilot -Stabilizer, Sideshift, Auto Up
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
| 21***73 | Nut; (1/2-28-Thd) | 1 |
| 22***29 | Coil As-Solenoid; (12-Volt)(Modulating Valve) | 1 |
253-1054 Valve Gp-Pilot -Stabilizer
| 03***44 | Seal-O-Ring | 1 |
| 10***20 | Carrier-Pin | 1 |
| 10***40 | Cap | 1 |
280-7871 Valve Gp-Pump Control -Power Compensator
| 09***30 | Ring-Retaining; (External) | 2 |
| 21***17 | Pin | 1 |
| 25***11 | Plate | 4 |
231-2615 Valve Gp-Solenoid -Remote Control
| 15***78 | Pin | 1 |
| 15***79 | Pin | 1 |
| 15***80 | Pin | 1 |
185-4254 Valve Gp-Solenoid -Auxiliary
| 18***54 | Valve Group-Solenoid; -Auxiliary | 1 |
| 23***12 | Pin | 1 |
| 32***80 | Brace As. | 1 |
Implements
216-6360 Arm Gp-Lift
| 11***58 | Bracket | 2 |
| 21***60 | Arm Group-Lift | 1 |
| 23***03 | Cable As | 2 |
223-3669 Boom Gp
| 16***95 | Knob | 1 |
| 16***98 | Knob | 2 |
| 18***84 | Bearing | 1 |
268-9910 Brace Gp-Lift Cylinder
| 13***75 | Bracket As | 1 |
| 13***43 | Cable | 1 |
| 21***81 | Pin | 1 |
213-6692 Linkage Gp-Backhoe Bucket
| 12***74 | Plate As | 1 |
| 13***07 | Pin | 1 |
| 21***92 | Linkage Group-Backhoe Bucket | 1 |
216-1238 Lock Gp-Stabilizer Leg
| 21***38 | Lock Group-Stabilizer Leg | 1 |
| 25***59 | Cable As | 1 |
| 9R***01 | Pin-Cotter | 2 |
252-4655 Lock Gp-Transport -Loader
| 25***55 | Lock Group-Transport; -Loader | 1 |
| 25***77 | Pin | 2 |
| 27***97 | Pin | 1 |
252-4660 Lock Gp-Transport -Backhoe Bucket
| 10***94 | Bolt; (M24x3x200-mm) | 2 |
| 16***92 | Bolt; (M24x3x160-mm) | 2 |
| 19***94 | Bolt; (M30x3.5x200-mm) | 1 |
214-7036 Lock Gp-Transport -Boom
| 21***36 | Lock Group-Transport; -Boom | 1 |
| 25***70 | Sideshift Group; -Standard Frame | 1 |
| 25***77 | Pin | 2 |
206-1641 Lock Gp-Transport -Stabilizer
| 16***70 | Pad As-Stabilizer; (Street) | 4 |
| 20***41 | Lock Group-Transport; -Stabilizer | 1 |
| 8T***93 | Bolt-Plt; (M16 X 2.0 X 50) | 12 |
9r-0868 Pad Gp-Stabilizer -Street
| 10***94 | Bolt; (M24x3x200-mm) | 2 |
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 17***05 | Bolt-Socket Head; (M8x1.25x12-mm) | 8 |
320-6002 Sideshift Ar -Kit, Narrow Frame
| 13***37 | Pad-Stabilizer | 2 |
| 18***13 | Pin As | 2 |
| 18***34 | Shim; (5.5-mm Thk) | 2 |
320-6000 Sideshift Ar -Kit, Standard Frame
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 17***05 | Bolt-Socket Head; (M8x1.25x12-mm) | 8 |
| 25***30 | Pad As | 4 |
257-4870 Sideshift Gp -Standard Frame
| 09***07 | Nut; (M12x1.75-Thd) | 2 |
| 1L***68 | Ring-Retaining | 2 |
| 20***35 | Block | 2 |
271-7708 Sideshift Gp -Narrow Frame
| 09***07 | Nut; (M12x1.75-Thd) | 2 |
| 1L***68 | Ring-Retaining | 2 |
| 20***35 | Block | 2 |
273-6318 Sideshift Gp -Standard Frame
| 09***50 | Ring-Retaining | 2 |
| 10***11 | Block | 2 |
| 21***74 | Stick As; (Hoe) | 1 |
126-5707 Stabilizer Gp-Backhoe
| 12***07 | Stabilizer Group-Backhoe | 1 |
| 1K***70 | Nut (National Coarse) | 1 |
| 22***15 | Base As | 1 |
214-6080 Stick Gp-Extendable
| 21***80 | Stick Group-Extendable | 1 |
| 22***14 | Bucket Group-Multipurpose | 1 |
| 22***40 | Cylinder Group-Multipurpose Bukt | 2 |
209-9942 Stick Gp-Hoe
| 10***12 | Fork As | 2 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
Lubrication System
323-9307 Breather Gp -Crankcase
| 13***55 | Hose; (8-cm) | 0 |
| 16***21 | Canister As-Breather; (Crankcase) | 1 |
| 18***43 | Seal; (Breather)(Crankcase) | 1 |
309-7555 Filler Gp-Engine Oil
| 22***22 | Plug-Cup | 1 |
| 30***55 | Filler Group-Engine Oil | 1 |
| 31***69 | Filler Group-Engine Oil | 1 |
307-2033 Gauge Gp-Oil Level & Filler -Engine
| 11***08 | Clip | 1 |
| 12***71 | Clamp-Hose | 1 |
| 23***51 | Cap As; (Engine Oil Filler) | 1 |
230-7578 Pump Gp-Engine Oil
| 10***61 | Bolt; (M10x1.50x50-mm) | 5 |
| 22***29 | Pump As-Engine Oil | 1 |
| 23***78 | Pump Group-Engine Oil | 1 |
298-5112 Pump Gp-Engine Oil
| 10***61 | Bolt; (M10x1.50x50-mm) | 5 |
| 22***29 | Pump As-Engine Oil | 1 |
| 29***12 | Pump Group-Engine Oil | 1 |
Machine Arrangement
326-4470 Backhoe Ar-Extendable Stick
| 20***39 | Mounting Group-Cylinder; -Extendable Stick | 1 |
| 21***94 | Cylinder Group-Stick | 1 |
| 21***96 | Cylinder Group-Backhoe Bucket | 1 |
229-3076 Backhoe Ar-Extendable Stick
| 20***39 | Mounting Group-Cylinder; -Extendable Stick | 1 |
| 21***94 | Cylinder Group-Stick | 1 |
| 21***96 | Cylinder Group-Backhoe Bucket | 1 |
326-4472 Backhoe Ar-Extendable Stick
| 20***39 | Mounting Group-Cylinder; -Extendable Stick | 1 |
| 21***94 | Cylinder Group-Stick | 1 |
| 21***96 | Cylinder Group-Backhoe Bucket | 1 |
326-4459 Backhoe Ar-Standard Stick
| 20***42 | Stick Group-Hoe | 1 |
| 21***94 | Cylinder Group-Stick | 1 |
| 21***96 | Cylinder Group-Backhoe Bucket | 1 |
326-4461 Backhoe Ar-Standard Stick
| 20***42 | Stick Group-Hoe | 1 |
| 21***94 | Cylinder Group-Stick | 1 |
| 21***96 | Cylinder Group-Backhoe Bucket | 1 |
310-4264 Chassis Ar
| 12***07 | Stabilizer Group-Backhoe | 1 |
| 20***49 | Mounting Group-Cab | 1 |
| 20***41 | Lock Group-Transport; -Stabilizer | 1 |
308-2335 Common Ar
| 23***57 | Loader Ar | 1 |
| 30***35 | Common Ar | 1 |
| 30***47 | Bearing,Main (010), Hydraulic Ar | 1 |
214-7020 Conversion Ar-Certification -Europe
| 15***84 | Reflector Group; -Side Shift | 1 |
| 21***20 | Conversion Ar-Certification; -Europe | 1 |
| 21***38 | Lock Group-Stabilizer Leg | 1 |
252-4649 Conversion Ar-Roading -Germany
| 11***18 | Installation Ar-Wheel Chock | 1 |
| 21***24 | Guard Group-Bucket | 1 |
| 21***32 | Lines Group-Drain | 1 |
252-4635 Conversion Ar-Roading -United Kingdom
| 12***74 | Plate As | 1 |
| 13***07 | Pin | 1 |
| 16***99 | Restrainer-Bucket | 1 |
216-0896 Conversion Ar-Roading -Italy
| 10***16 | Cover-Work Light | 8 |
| 10***19 | Plate As-Side Reflective | 3 |
| 15***42 | Plate-Information; (Maximum Weight) | 1 |
311-7343 Drive Ar-Backhoe Loader -All Wheel Drive, All Wheel Steer
| 21***75 | Shaft Group-Drive; -Rear | 1 |
| 21***83 | Axle Group-Drive & Steering; -Front | 1 |
| 22***29 | Mounting Group-Axle | 1 |
230-0857 Loader Ar
| 21***72 | Cylinder Group-Tilt | 2 |
| 21***60 | Arm Group-Lift | 1 |
| 22***93 | Wiring Group-Kickout & Positioner | 1 |
304-0284 Premier Ar
| 17***00 | Film-Identification; (Premier)(Premier) | 2 |
| 30***36 | Control Ar-Ride; -Pilot Control | 1 |
| 30***84 | Premier Ar | 1 |
323-0976 Suppression Ar-Sound
| 32***40 | Liner Group-Sound Suppression | 1 |
| 32***76 | Suppression Ar-Sound | 1 |
Operator Station
310-4346 Cab Ar -Deluxe, With A/C
| 28***34 | Bracket | 1 |
| 29***31 | Bracket | 1 |
| 29***12 | Compressor Group-Refrigerant | 1 |
310-4345 Cab Ar-Enclosed Rops
| 31***45 | Cab Ar-Enclosed Rops, Wiring Harness; For Use Only When Replaacing 33***53 With 49***98 See Note | 1 |
| 31***41 | Mount | 4 |
| 35***84 | Core As-Condenser | 1 |
316-7289 Cab Gp -Deluxe
| 16***78 | Clip | 1 |
| 16***51 | Fastener | 1 |
| 17***91 | Nut-Spring | 1 |
299-2212 Compressor Gp-Refrigerant
| 20***96 | Console As; (Lh) | 1 |
| 20***98 | Door-Storage | 1 |
| 20***99 | Cup Holder; (Front) | 1 |
321-7038 Compressor Gp-Refrigerant
| 12***27 | Screw-Pan Head; (M3x0.5x16-mm) | 2 |
| 18***93 | Plug | 1 |
| 20***59 | Door-Storage | 1 |
301-9725 Condenser & Mtg Gp-Refrigerant
| 16***68 | Fastener-Panel | 12 |
| 26***59 | Bracket As | 1 |
| 26***61 | Bracket As | 1 |
206-1702 Console Gp-Operator -Lh
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 11 |
| 20***02 | Console Group-Operator; -Lh | 1 |
206-1700 Console Gp-Operator -Rh
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 20***00 | Console Group-Operator; -Rh | 1 |
317-5539 Console Gp-Operator -Front
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
| 25***37 | Boot | 1 |
269-3201 Control & Mtg Gp-Joystick
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
| 25***34 | Grommet | 1 |
271-3097 Control Gp-Handle -Lh
| 20***32 | Plate As | 1 |
| 25***49 | Plug | 1 |
| 27***97 | Control Group-Handle; (Lh) | 1 |
272-9699 Control Gp-Handle -Rh, Joystick
| 13***87 | Screw; (M4x0.7x12-mm) | 2 |
| 13***49 | Spacer; (7.4x12.7x24-mm Thk)(12.7mm Dia) | 2 |
| 15***69 | Spring Group-Gas; (Cab Door) | 1 |
271-3099 Control Gp-Joystick -Lh
| 1H***44 | Lockwasher (Bracket To Cab) | 4 |
| 24***79 | Plate | 2 |
| 27***99 | Control Group-Joystick; -Lh | 1 |
271-3096 Control Gp-Joystick -Rh
| 13***87 | Screw; (M4x0.7x12-mm) | 2 |
| 13***49 | Spacer; (7.4x12.7x24-mm Thk)(12.7mm Dia) | 2 |
| 15***69 | Spring Group-Gas; (Cab Door) | 1 |
317-5538 Control Gp-Steering -Tilt
| 11***09 | Knob-Control | 1 |
| 11***27 | Screw-Machine; (M6x1x30-mm) | 3 |
| 12***12 | Screw-Pan Head; (8-16x0.32-In) | 2 |
329-1167 Door Gp-Cab -Rh
| 11***09 | Knob-Control | 1 |
| 11***27 | Screw-Machine; (M6x1x30-mm) | 3 |
| 12***12 | Screw-Pan Head; (8-16x0.32-In) | 2 |
329-1168 Door Gp-Cab -Lh
| 11***31 | Switch-Temperature; (Air Conditioner) | 1 |
| 12***16 | Connector | 1 |
| 12***78 | Locknut; (M6x1-Thd) | 4 |
206-1618 Floor Mat Gp
| 12***16 | Connector | 1 |
| 12***78 | Locknut; (M6x1-Thd) | 4 |
| 17***45 | Kit-Receptacle; (2-Pin) | 1 |
210-8363 Heater & Air Conditioner Gp
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 16***25 | Horn As; (24-Volt, Low Tone) | 1 |
| 20***45 | Strap-Cable | 2 |
358-7087 Heater & Air Conditioner Gp
| 16***25 | Horn As; (24-Volt, Low Tone) | 1 |
| 20***45 | Strap-Cable | 2 |
| 35***87 | Heater & Air Conditioner Group | 1 |
316-7290 Heater & Mtg Gp-Cab
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 17***37 | Connector; (Radio) | 1 |
| 17***39 | Terminal; (Radio) | 11 |
316-7291 Heater & Mtg Gp-Cab
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***11 | Screw-Machine; (3/8-16x0.75-In) | 1 |
| 16***35 | Spring | 1 |
358-7086 Heater Gp-Cab
| 16***84 | Screw-Truss Head; (M5x0.8x20-mm) | 1 |
| 16***87 | Washer-Hard; (5.2x16x1.5-mm Thk) | 1 |
| 16***94 | Spring-Flat Wire | 1 |
210-8364 Heater Gp-Cab
| 16***84 | Screw-Truss Head; (M5x0.8x20-mm) | 1 |
| 16***87 | Washer-Hard; (5.2x16x1.5-mm Thk) | 1 |
| 16***94 | Spring-Flat Wire | 1 |
246-8055 Horn Gp-Electric -Rear
| 12***78 | Locknut; (M6x1-Thd) | 1 |
| 20***66 | Cable As | 1 |
| 21***43 | Lever As | 1 |
211-4261 Horn Gp-Electric -Rear
| 09***49 | Bolt; (M8x1.25x40-mm) | 1 |
| 11***02 | Knob | 1 |
| 15***83 | Washer-Hard; (8.4x35x2.5-mm Thk) | 3 |
270-3217 Installation Gp-Radio
| 08***77 | Lamp Group-Dome; (12-Volt) | 1 |
| 11***20 | Bolt-Socket Head; (M4x0.7x35-mm) | 8 |
| 12***70 | Screw-Machine; (M6x1x40-mm) | 5 |
328-7828 Kit-Seat Belt -Retractable, 3-In
| 32***28 | Kit-Seat Belt; -Retractable, 3-In | 1 |
| 3E***21 | Clip | 4 |
| 5D***26 | Clamp-Band; (9/16 To 1 1/16) | 8 |
324-2906 Kit-Seat Pan
| 10***11 | Support | 1 |
| 10***33 | Clip; (Slot) | 1 |
| 10***34 | Clip; (Tab) | 1 |
324-2894 Kit-Seat Suspension -Air
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 19***29 | Mirror As | 1 |
| 32***94 | Kit-Seat Suspension; -Air | 1 |
299-6986 Latch Gp-Cab Door & Window
| 13***40 | Locknut; (M8x1.25-Thd) | 2 |
| 15***72 | Stud | 2 |
| 22***50 | Mirror; (Exterior, Rear) | 1 |
299-6985 Latch Gp-Cab Door & Window
| 15***05 | Bracket & Mounting As; (Lh) | 1 |
| 15***06 | Bracket & Mounting As; (Rh) | 1 |
| 18***48 | Mirror As | 2 |
269-3248 Latch Gp-Console
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 7 |
| 20***23 | Cap; (Wiper) | 1 |
209-3367 Lever Gp-Governor -Handheld
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
| 20***67 | Lever Group-Governor; -Handheld | 1 |
317-5543 Liner Gp-Cab
| 03***57 | Washer; (13x26x6-mm Thk) | 2 |
| 16***68 | Fastener-Panel | 15 |
| 18***34 | Bearing-Self-Aligning | 2 |
315-2940 Lines Gp-Heater
| 11***90 | Mount As | 2 |
| 1L***77 | Button-- Fuel Tank Hole In Hood | 2 |
| 31***40 | Lines Group-Heater | 1 |
315-2939 Lines Gp-Heater & Air Cond
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 4 |
| 12***78 | Locknut; (M6x1-Thd) | 1 |
| 16***54 | Kit-Service; (Pedal) | 1 |
336-9168 Mirror Gp-Rear View -Exterior
| 14***57 | Roof Group-Cab; -Black | 1 |
| 33***68 | Mirror Group-Rear View; -Exterior | 1 |
259-6276 Mirror Gp-Rear View -Interior
| 25***76 | Mirror Group-Rear View; -Interior | 1 |
| 33***08 | Software Group-Communication; (Product Link 121sr) | 1 |
337-3135 Mirror Gp-Rear View -Exterior
| 13***86 | Roof As; (Black) | 1 |
| 17***93 | Spacer; (14x19.5x9-mm) | 4 |
| 17***94 | Seal | 4 |
315-1318 Motor Gp-Window Wiper -Rear
| 20***50 | Seat Belt; (3-In) | 1 |
| 31***18 | Motor Group-Window Wiper; -Rear | 1 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 4 |
313-3752 Motor Gp-Window Wiper
| 20***70 | Cover-Roof; (Center) | 1 |
| 22***82 | Cover-Roof; (Lh) | 1 |
| 22***83 | Cover-Roof; (Rh) | 1 |
269-3247 Mounting Gp-Backhoe Control -Pilot
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
| 11***59 | Screw-Pan Head; (10-16x0.75-In) | 2 |
| 12***40 | Fastener-Panel | 6 |
204-4249 Mounting Gp-Cab
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 20***49 | Mounting Group-Cab | 1 |
| 23***17 | Bolt; (3/8-16x0.875-In) | 2 |
209-3378 Pedal Gp-Governor
| 20***78 | Pedal Group-Governor | 1 |
| 31***91 | Seat Group-Suspension; -Deluxe, Cloth | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 1 |
263-9088 Radio Gp-Communication -Product Link 121sr
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 2 |
| 12***78 | Locknut; (M6x1-Thd) | 1 |
| 16***30 | Bearing | 4 |
149-0557 Roof Gp-Cab -Black
| 12***37 | Lamp; (12-Volt) | 1 |
| 13***24 | Seal | 1 |
| 14***57 | Roof Group-Cab; -Black | 1 |
148-2735 Roof Gp-Cab -Black
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 2 |
| 14***35 | Roof Group-Cab; -Black | 1 |
| 16***83 | Washer; (19.8x31.8x1.6-mm Thk) | 1 |
317-5545 Roof Gp-Cab
| 31***45 | Seal, O-Ring, O Ring Seal, Roof Group-Cab | 1 |
| 5P***97 | Clip (9.52mm Id); (9.52mm Dia) | 2 |
| 8C***81 | Hose; (200-cm) | 0 |
206-1748 Seat Belt Gp -Retractable, 3-In
| 10***45 | Blade As-Wiper; (600-mm) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***36 | Connector | 1 |
324-2903 Seat Gp -Deluxe, Cloth
| 13***40 | Locknut; (M8x1.25-Thd) | 2 |
| 14***23 | Plug | 2 |
| 16***82 | Bumper | 2 |
315-9891 Seat Gp-Suspension -Deluxe, Cloth
| 10***08 | Handle; (Rh) | 1 |
| 12***42 | Retainer; (Mount) | 6 |
| 12***45 | Washer; (13x40x3-mm Thk) | 8 |
314-4291 Seat Gp-Suspension -Deluxe, Cloth
| 10***08 | Handle; (Rh) | 1 |
| 12***42 | Retainer; (Mount) | 6 |
| 12***45 | Washer; (13x40x3-mm Thk) | 8 |
324-2890 Suspension Gp-Seat -Deluxe, Cloth
| 10***08 | Handle; (Rh) | 1 |
| 12***42 | Retainer; (Mount) | 5 |
| 12***45 | Washer; (13x40x3-mm Thk) | 6 |
322-9486 Swivel Gp-Seat
| 10***08 | Handle; (Rh) | 1 |
| 12***42 | Retainer; (Mount) | 5 |
| 12***45 | Washer; (13x40x3-mm Thk) | 6 |
239-1080 Tachometer Gp-Electric
| 23***80 | Tachometer Group-Electric | 1 |
| 31***16 | Blade As-Wiper; (450-mm)(Rear) | 1 |
| 31***17 | Arm Group-Window Wiper; (Rear) | 1 |
206-1857 Visor Gp-Cab
| 20***57 | Visor Group-Cab | 1 |
| 29***60 | Film-Identification; (Cat 444e, Lh) | 1 |
| 29***61 | Film-Identification; (Cat 444e, Rh) | 1 |
317-5548 Washer Gp-Window
| 11***42 | Chock Group-Wheel | 2 |
| 13***52 | Plate | 2 |
| 31***48 | Washer Group-Window | 1 |
327-7637 Window Gp-Cab -Rh
| 13***58 | Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap) | 1 |
| 15***90 | Film-Identification; (Water Separator) | 1 |
| 19***13 | Plug; (Protection) | 2 |
327-7601 Window Gp-Cab -Lh
| 10***27 | Film-Identification; (20-Km/H)(20 Kph) | 4 |
| 13***10 | Film-Instruction; (Wheel Chock) | 1 |
| 15***42 | Plate-Information; (Maximum Weight) | 1 |
315-1270 Window Gp-Cab -Rear
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 3 |
| 31***70 | Window Group-Cab; -Rear | 1 |
| 5P***00 | Key Total 2 Pieces Per Unit; (Literature Compartment) | 1 |
333-9902 Window Gp-Door -Rh
| 12***78 | Locknut; (M6x1-Thd) | 2 |
| 17***31 | Screw; (Truss Head) (M4x0.7x12mm) | 1 |
| 20***52 | Cover-Vandalism | 1 |
333-9901 Window Gp-Door -Lh
| 10***20 | Plate | 1 |
| 10***21 | Bracket As | 1 |
| 10***22 | Magnet As | 1 |
315-1272 Wiper Gp-Window -Rear
| 11***40 | Filter-Oil; (Standard Efficiency)(Transmission) | 1 |
| 12***17 | Filter-Oil; (Ultra High Efficiency)(Hydraulic, Transmission) | 1 |
| 22***30 | Filter As-Water Sep & Fuel | 1 |
Power Train
201-1920 Valve Gp-Tire
| 20***16 | Mounting Group-Wheel; (Rear) | 2 |
| 20***19 | Nut; (M20x1.5-Thd) | 20 |
| 20***20 | Valve Group-Tire | 1 |
6d-0337 Valve Gp-Tire
| 6D***37 | Valve Group-Tire | 2 |
315-2318 Axle Gp-Drive & Steering -Rear
| 14***25 | Connector As. | 1 |
| 14***68 | Elbow Group | 3 |
| 15***41 | Block | 2 |
216-9083 Axle Gp-Drive & Steering -Front
| 09***05 | Bolt-Socket Head; (M14x2x40-mm) | 3 |
| 13***82 | Bracket | 1 |
| 15***44 | Plug As-Drain; (Magnetic)(Final Drive Planetary) | 4 |
320-7233 Control Gp-Differential Lock -Transmission Autoshift
| 09***28 | Bearing As; (Tapered Roller) | 1 |
| 09***41 | Bearing As; (Tapered Roller) | 1 |
| 15***44 | Plug As-Drain; (Magnetic)(Final Drive Planetary) | 1 |
238-5286 Differential & Bevel Gear Gp -Lh
| 19***73 | Bushing | 1 |
| 19***94 | Bolt; (M14x2x40-mm) | 12 |
| 19***84 | Cover-Differential | 1 |
212-5710 Differential Gp
| 19***59 | Seal-Pin | 4 |
| 19***73 | Bushing | 2 |
| 19***94 | Bolt; (M14x2x40-mm) | 12 |
231-0692 Differential Gp -Axle, Rear
| 11***06 | Plate-Converter Drive | 1 |
| 11***13 | Plate-Converter Reinforcement | 1 |
| 23***92 | Differential Group; -Axle, Rear | 1 |
111-7907 Drive Gp-Flexible Coupling
| 11***07 | Drive Group-Flexible Coupling | 1 |
| 14***68 | Elbow Group | 2 |
| 16***04 | Spacer; (10.67x16.95x23-mm Thk) | 1 |
211-0073 Filler Gp-Power Train Oil -Autoshift
| 21***32 | Bearing-Wheel | 2 |
| 21***73 | Filler Group-Power Train Oil; -Autoshift | 1 |
| 21***02 | Flange | 1 |
216-1609 Flange Gp-Wheel
| 19***78 | Ring-Snap | 1 |
| 21***02 | Gear-Ring; (81-Teeth) | 1 |
| 21***08 | Gear Group-Ring; (Rear Axle) | 1 |
216-7477 Housing & Flange Gp-Axle -Lh
| 19***78 | Ring-Snap | 1 |
| 20***32 | Bearing | 2 |
| 21***02 | Gear-Ring; (81-Teeth) | 1 |
238-5277 Housing & Flange Gp-Axle -Lh
| 19***78 | Ring-Snap | 1 |
| 20***32 | Bearing | 2 |
| 21***02 | Gear-Ring; (81-Teeth) | 1 |
216-7476 Housing & Flange Gp-Axle -Rh
| 19***78 | Ring-Snap | 1 |
| 21***02 | Gear-Ring; (81-Teeth) | 1 |
| 21***08 | Gear Group-Ring; (Rear Axle) | 1 |
238-5278 Housing & Flange Gp-Axle -Rh
| 19***19 | Bushing | 4 |
| 19***48 | Nut-Jam; (M16x2-Thd) | 2 |
| 19***05 | Bolt; (M16x130-mm) | 2 |
238-5279 Housing Gp-Axle -Lh
| 19***48 | Nut-Jam; (M16x2-Thd) | 2 |
| 19***07 | Seal | 1 |
| 19***79 | Bushing | 1 |
216-7479 Housing Gp-Axle -Rh
| 19***48 | Nut-Jam; (M16x2-Thd) | 2 |
| 19***05 | Bolt; (M16x130-mm) | 2 |
| 19***07 | Seal | 1 |
316-1925 Housing Gp-Axle -Rear
| 08***90 | Bolt; (M20x2.5x250-mm) | 8 |
| 16***96 | Washer-Thrust; (55.5x100.5x5-mm Thk)(5mm) | 2 |
| 1K***82 | Washer; (2.266x4x0.031-In Thk) | 1 |
216-7481 Housing Gp-Axle -Lh
| 19***48 | Nut-Jam; (M16x2-Thd) | 2 |
| 19***07 | Seal | 1 |
| 19***79 | Bushing | 1 |
238-5280 Housing Gp-Axle -Rh
| 09***28 | Bearing As; (Tapered Roller) | 1 |
| 09***74 | Bolt-Socket Head; (M12x1.75x65-mm) | 4 |
| 09***41 | Bearing As; (Tapered Roller) | 1 |
222-1529 Mounting Gp-Axle
| 22***29 | Mounting Group-Axle | 1 |
| 24***27 | Support As; (Rh) | 1 |
| 27***08 | Support As; (Lh) | 1 |
254-5703 Mounting Gp-Transmission
| 19***53 | Ring-Retaining | 3 |
| 19***60 | Bearing | 3 |
| 20***57 | Ring-Retainer | 6 |
238-5276 Planetary Gp-Final Drive
| 11***26 | Drive & Mtg Group-Pump | 1 |
| 11***40 | Filter-Oil; (Standard Efficiency)(Transmission) | 1 |
| 20***39 | Control Group-Service Brake; -Standard Shift | 1 |
216-1610 Planetary Gp-Final Drive -Axle
| 19***53 | Ring-Retaining | 3 |
| 19***69 | Plug; (Thrust) | 1 |
| 19***60 | Bearing | 3 |
311-7331 Power Train Ar -All Wheel Drive, All Wheel Steer, Autoshift
| 12***77 | Washer-Thrust; (40x65x4-mm Thk) | 1 |
| 12***07 | Cone-Tapered Roller | 2 |
| 12***08 | Cup-Tapered Roller | 2 |
274-4580 Shaft Gp-Counter
| 10***26 | Bolt; (M24x19.1-mm) | 8 |
| 11***87 | Kit-Spider & Bearing; (Drive Shaft) | 2 |
| 27***80 | Shaft Group-Counter | 1 |
304-3264 Shaft Gp-Drive -Powershift
| 12***94 | Washer-Thrust; (40x70x4-mm Thk) | 1 |
| 12***00 | Washer-Thrust; (50x70x4-mm Thk) | 1 |
| 12***05 | Cup-Tapered Roller | 2 |
216-4475 Shaft Gp-Drive -Rear
| 10***26 | Bolt; (M24x19.1-mm) | 8 |
| 11***87 | Kit-Spider & Bearing; (Drive Shaft) | 2 |
| 21***75 | Shaft Group-Drive; -Rear | 1 |
274-4561 Shaft Gp-Idler -Powershift
| 12***94 | Washer-Thrust; (40x70x4-mm Thk) | 1 |
| 12***00 | Washer-Thrust; (50x70x4-mm Thk) | 3 |
| 12***86 | Ring-Seal | 1 |
274-4578 Shaft Gp-Input
| 00***62 | Seal-O-Ring; (63.17mm Id) | 2 |
| 09***27 | Ring-Retaining | 1 |
| 09***28 | Ring-Retaining; (External) | 1 |
274-4582 Shaft Gp-Output -Main
| 12***77 | Washer-Thrust; (40x65x4-mm Thk) | 1 |
| 12***78 | Ring-Seal | 1 |
| 12***84 | Spacer; (45x49x8-mm Thk) | 1 |
280-7008 Shaft Gp-Output
| 11***07 | Drive Group-Flexible Coupling | 1 |
| 21***16 | Torque Converter As | 1 |
| 28***08 | Shaft Group-Output | 1 |
245-8204 Transmission Ar-Power Shift -All Wheel Drive, Autoshift
| 10***88 | Shim; (0.05-mm Thk) | 2 |
| 10***61 | Plate-Cover | 1 |
| 11***85 | Seal-O-Ring; (13.94mm Id) | 1 |
294-9818 Transmission Gp-Power Shift
| 09***68 | Bolt-Socket Head; (M5x0.8x8-mm) | 2 |
| 25***30 | Kit-Seal; (Valve) | 1 |
| 27***41 | Valve Group-Solenoid; (12-Volt Dc) | 1 |
274-8048 Valve & Mtg Gp-Solenoid -Differential Lock
| 10***86 | Seal-O-Ring | 1 |
| 27***48 | Valve & Mtg Group-Solenoid; -Hydraulic Lockout, Work Tool Psnr | 1 |
| 6V***78 | Seal-O-Ring; (25.12mm Id) | 1 |
147-0209 Valve Gp-Relief -Pressure Regulator
| 14***09 | Valve Group-Relief; -Pump Pressure-Pressure Regulator | 1 |
| 2D***28 | Core-Valve | 1 |
| 2D***29 | Grommet | 1 |
303-0416 Wheel & Tire Ar -All Wheel Drive
| 19***48 | Wheel As; (Rh, Rear) | 1 |
| 20***20 | Valve Group-Tire | 1 |
| 20***75 | Tire; (440/80-R28) | 1 |
249-7570 Wheel & Tire Ar
| 20***16 | Mounting Group-Wheel; (Rear) | 2 |
| 20***19 | Nut; (M20x1.5-Thd) | 20 |
| 24***70 | Wheel & Tire Ar | 1 |
273-5140 Wheel & Tire Ar
| 20***16 | Mounting Group-Wheel; (Rear) | 2 |
| 20***19 | Nut; (M20x1.5-Thd) | 20 |
| 27***40 | Wheel & Tire Ar | 1 |
249-7573 Wheel & Tire Ar
| 20***16 | Mounting Group-Wheel; (Rear) | 2 |
| 20***19 | Nut; (M20x1.5-Thd) | 20 |
| 24***73 | Wheel & Tire Ar | 1 |
303-0431 Wheel & Tire Gp -Rear, Rh
| 15***16 | Switch As; (Parking Brake Alarm) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***68 | Fastener-Panel | 2 |
249-7571 Wheel & Tire Gp -Rear, Lh
| 19***29 | Tire; (440/80r28)(440/80r28) | 1 |
| 19***48 | Wheel As; (Rh, Rear) | 1 |
| 20***20 | Valve Group-Tire | 1 |
249-7569 Wheel & Tire Gp -Rear, Rh
| 19***29 | Tire; (440/80r28)(440/80r28) | 1 |
| 19***48 | Wheel As; (Rh, Rear) | 1 |
| 20***20 | Valve Group-Tire | 1 |
273-5096 Wheel & Tire Gp -Rear, Rh
| 19***48 | Wheel As; (Rh, Rear) | 1 |
| 20***20 | Valve Group-Tire | 1 |
| 27***96 | Wheel & Tire Group; -Rear, Rh | 1 |
249-7568 Wheel & Tire Gp -Rear, Lh
| 19***48 | Wheel As; (Rh, Rear) | 1 |
| 20***20 | Valve Group-Tire | 1 |
| 20***75 | Tire; (440/80-R28) | 1 |
303-0430 Wheel & Tire Gp -Rear, Lh
| 19***48 | Wheel As; (Rh, Rear) | 1 |
| 20***20 | Valve Group-Tire | 1 |
| 30***30 | Wheel & Tire Group; -Rear, Lh | 1 |
273-5095 Wheel & Tire Gp -Rear, Lh
| 19***48 | Wheel As; (Rh, Rear) | 1 |
| 20***20 | Valve Group-Tire | 1 |
| 26***63 | Tire; (440/80-R28) | 1 |
249-7572 Wheel & Tire Gp -Rear, Rh
| 19***48 | Wheel As; (Rh, Rear) | 1 |
| 20***20 | Valve Group-Tire | 1 |
| 24***72 | Wheel & Tire Group; -Rear, Rh | 1 |
Service Equipment And Supplies
250-7925 Film Gp
| 25***25 | Film Group | 1 |
113-0018 Installation Ar-Wheel Chock
| 11***18 | Installation Ar-Wheel Chock | 1 |
216-0910 Lock Gp-Vandalism
| 21***10 | Lock Group-Vandalism | 1 |
258-8558 Plate & Film Gp
| 25***58 | Plate & Film Group | 1 |
323-6626 Plate & Film Gp
| 32***26 | Plate & Film Group | 1 |
101-4419 Plate As-Side Reflective
| 10***19 | Plate As-Side Reflective | 1 |
206-1701 Protection Gp-Vandalism -Rotating Guard
| 20***01 | Protection Group-Vandalism; -Rotating Guard | 1 |
243-1022 Service Gp-Filter -Kit
| 24***22 | Service Group-Filter; -Kit | 1 |
Steering System
238-5238 Cylinder Gp-Steering
| 09***35 | Spacer; (11x25x20-mm Thk) | 1 |
| 09***35 | Connector | 1 |
| 10***36 | Clip | 4 |
315-8126 Lines Gp-Steering -All Wheel Steer
| 22***13 | Bracket As | 1 |
| 25***89 | Manifold Group-Steering; -All Wheel Steer | 1 |
| 31***26 | Lines Group-Steering; -All Wheel Steer | 1 |
229-9840 Manifold & Mtg Gp-Steering -All Wheel Steer
| 14***18 | Connector As | 3 |
| 14***25 | Connector As. | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
311-7342 Manifold & Mtg Gp-Steering -All Wheel Steer
| 19***14 | Seal-O-Ring | 1 |
| 23***78 | Kit-Seal; (Pressure Reducing Valve) | 1 |
| 25***77 | Plug | 1 |
256-3089 Manifold Gp-Steering -All Wheel Steer
| 19***14 | Seal-O-Ring | 1 |
| 22***15 | Kit-Seal; (Check Valve)(Manual Brake Release Hand Pump) | 1 |
| 23***78 | Kit-Seal; (Pressure Reducing Valve) | 1 |
210-6240 Pump Gp-Metering -Hmu
| 12***08 | Screw-Hex Socket; (M4x0.7x30-mm) | 1 |
| 14***47 | Ring-Retaining | 2 |
| 16***61 | Nut; (M18x1.5-Thd) | 1 |
310-6216 Steering Column Gp -Tilt
| 21***66 | Kit-Seal & Nut | 1 |
| 21***68 | Coil As; (12-Vdc) | 2 |
| 31***16 | Steering Column Group; -Tilt | 1 |
255-5249 Valve Gp-Solenoid -Front
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 12***41 | Latch As-T-Bar | 1 |
| 15***33 | Film-Identification; (12-Volt) | 1 |
255-5247 Valve Gp-Solenoid -Rear
| 25***40 | Coil As | 1 |
| 25***47 | Valve Group-Solenoid; -Rear | 1 |
| 25***76 | Kit-Seal | 1 |
Work Tools
200-2193 Bucket Gp-Hoe
| 13***03 | Tooth-Uni | 1 |
| 13***06 | Tooth Group-Uni | 6 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
9r-9118 Bucket Gp-Hoe -Heavy-Duty
| 12***44 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 13***43 | Plate | 1 |
| 16***89 | Tack-Fastener | 4 |
123-6743 Bucket Gp-Hoe -Heavy-Duty
| 12***43 | Bucket Group-Hoe; -Heavy-Duty | 1 |
| 12***55 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 13***03 | Tooth-Uni | 1 |
124-4900 Bucket Gp-Hoe -Heavy-Duty
| 12***00 | Bucket Group-Hoe; -Heavy-Duty | 1 |
| 12***80 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 13***03 | Tooth-Uni | 1 |
130-2052 Bucket Gp-Hoe -Heavy-Duty
| 13***52 | Bucket Group-Hoe; -Heavy-Duty | 1 |
| 13***21 | Bucket As-Hoe | 1 |
| 13***03 | Tooth-Uni | 1 |
128-3131 Bucket Gp-Hoe -Heavy-Duty
| 12***31 | Bucket Group-Hoe; -Heavy-Duty | 1 |
| 13***53 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 13***03 | Tooth-Uni | 1 |
134-5888 Bucket Gp-Hoe -Heavy-Duty
| 13***88 | Bucket Group-Hoe; -Heavy-Duty | 1 |
| 13***91 | Bucket Group-Hoe | 1 |
| 6V***13 | Ring-Retaining | 2 |
9r-9018 Bucket Gp-Hoe -Heavy-Duty
| 13***03 | Tooth-Uni | 1 |
| 13***06 | Tooth Group-Uni | 3 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
134-5867 Bucket Gp-Hoe -Heavy-Duty
| 13***65 | Bucket Group-Hoe; -Heavy-Duty | 1 |
| 13***67 | Bucket Group-Hoe; -Heavy-Duty | 1 |
| 6V***13 | Ring-Retaining | 2 |
136-6914 Bucket Gp-Hoe -Heavy-Duty
| 13***91 | Bucket As-Hoe | 1 |
| 13***14 | Bucket Group-Hoe; -Heavy-Duty | 1 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
200-2194 Bucket Gp-Hoe
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 20***94 | Bucket Group-Hoe | 1 |
200-2195 Bucket Gp-Hoe
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 20***95 | Bucket Group-Hoe | 1 |
273-0862 Bucket Gp-Hoe -Heavy-Duty
| 13***03 | Tooth-Uni | 1 |
| 13***06 | Tooth Group-Uni | 6 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
9r-9130 Bucket Gp-Hoe -Heavy-Duty
| 12***02 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
130-2055 Bucket Gp-Hoe -Heavy-Duty
| 13***55 | Bucket Group-Hoe; -Heavy-Duty | 1 |
| 13***71 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
9r-6512 Bucket Gp-Hoe -Heavy-Duty
| 13***03 | Tooth-Uni | 1 |
| 13***06 | Tooth Group-Uni | 6 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
136-2168 Bucket Gp-Hoe -Heavy-Duty
| 13***68 | Bucket Group-Hoe; -Heavy-Duty | 1 |
| 13***92 | Bucket As-Hoe | 1 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
131-2109 Bucket Gp-Hoe -Heavy-Duty
| 13***09 | Bucket Group-Hoe; -Heavy-Duty | 1 |
| 13***73 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
136-6913 Bucket Gp-Hoe -Heavy-Duty
| 13***13 | Bucket As-Hoe | 1 |
| 13***03 | Tooth-Uni | 1 |
| 13***06 | Tooth Group-Uni | 3 |
219-3390 Bucket Gp-Hoe -High Capacity
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 20***38 | Pin, . Shoe | 1 |
148-3725 Bucket Gp-Hoe
| 13***03 | Tooth-Uni | 1 |
| 13***06 | Tooth Group-Uni | 6 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
151-7888 Bucket Gp-Hoe -High Capacity
| 13***03 | Tooth-Uni | 1 |
| 13***06 | Tooth Group-Uni | 3 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
273-2960 Bucket Gp-Hoe -Heavy-Duty
| 16***43 | Pin | 1 |
| 16***44 | Pin | 1 |
| 27***60 | Bucket Group-Hoe; -Heavy-Duty | 1 |
136-6896 Bucket Gp-Hoe
| 13***95 | Bucket As-Hoe | 1 |
| 13***96 | Bucket Group-Hoe | 1 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
273-3731 Bucket Gp-Hoe -Heavy-Duty
| 09***20 | Pin-Cotter | 2 |
| 22***15 | Bulldozer As | 1 |
| 22***16 | Clam As-Multipurpose Bucket | 1 |
273-1950 Bucket Gp-Hoe
| 16***43 | Pin | 1 |
| 16***44 | Pin | 1 |
| 27***50 | Bucket Group-Hoe | 1 |
134-5865 Bucket Gp-Hoe -Heavy-Duty
| 13***65 | Bucket Group-Hoe; -Heavy-Duty | 1 |
| 13***75 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 13***43 | Plate | 1 |
273-1957 Bucket Gp-Hoe
| 13***03 | Tooth-Uni | 1 |
| 13***06 | Tooth Group-Uni | 3 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
136-7044 Bucket Gp-Hoe -Extreme Service
| 12***35 | Pin | 1 |
| 13***44 | Bucket Group-Hoe; -Extreme Service | 1 |
| 13***69 | Bucket Group-Hoe | 1 |
9r-9030 Bucket Gp-Hoe -Heavy-Duty
| 13***03 | Tooth-Uni | 1 |
| 13***06 | Tooth Group-Uni | 5 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
200-2196 Bucket Gp-Hoe
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 20***96 | Bucket Group-Hoe | 1 |
128-3779 Bucket Gp-Hoe -Heavy-Duty
| 12***79 | Bucket Group-Hoe; -Heavy-Duty | 1 |
| 13***56 | Bucket As-Hoe | 1 |
| 13***03 | Tooth-Uni | 1 |
136-7045 Bucket Gp-Hoe -Extreme Service
| 13***03 | Tooth-Uni | 1 |
| 13***06 | Tooth Group-Uni | 3 |
| 13***45 | Bucket Group-Hoe; -Extreme Service | 1 |
219-3391 Bucket Gp-Hoe -High Capacity
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 20***38 | Pin, . Shoe | 1 |
272-9608 Bucket Gp-Hoe -Heavy-Duty
| 13***03 | Tooth-Uni | 1 |
| 13***06 | Tooth Group-Uni | 3 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
273-3792 Bucket Gp-Hoe
| 22***25 | Bulldozer As; -Multipurpose Bucket | 1 |
| 22***79 | Bracket As | 1 |
| 22***80 | Plate | 4 |
273-1948 Bucket Gp-Hoe
| 16***43 | Pin | 1 |
| 16***44 | Pin | 1 |
| 27***48 | Bucket Group-Hoe | 1 |
151-7890 Bucket Gp-Hoe -High Capacity
| 13***03 | Tooth-Uni | 1 |
| 13***06 | Tooth Group-Uni | 5 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
273-1374 Bucket Gp-Hoe
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 20***38 | Pin, . Shoe | 1 |
128-7664 Bucket Gp-Hoe -Heavy-Duty
| 12***53 | Bracket As; (Rh) | 1 |
| 12***55 | Bracket As; (Lh) | 1 |
| 12***57 | Plate | 2 |
273-3732 Bucket Gp-Hoe -Heavy-Duty
| 09***20 | Pin-Cotter | 2 |
| 22***16 | Clam As-Multipurpose Bucket | 1 |
| 22***25 | Bulldozer As; -Multipurpose Bucket | 1 |
136-6899 Bucket Gp-Hoe
| 13***99 | Bucket Group-Hoe | 1 |
| 13***09 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 13***43 | Plate | 1 |
9r-9036 Bucket Gp-Hoe -Heavy-Duty
| 13***03 | Tooth-Uni | 1 |
| 13***06 | Tooth Group-Uni | 6 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
272-7872 Bucket Gp-Hoe -Heavy-Duty
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 20***38 | Pin, . Shoe | 1 |
134-5866 Bucket Gp-Hoe -Heavy-Duty
| 13***66 | Bucket Group-Hoe; -Heavy-Duty | 1 |
| 13***76 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
9r-9136 Bucket Gp-Hoe -Heavy-Duty
| 13***57 | Bucket As-Hoe | 1 |
| 13***03 | Tooth-Uni | 1 |
| 13***06 | Tooth Group-Uni | 3 |
124-4901 Bucket Gp-Hoe -Heavy-Duty
| 12***01 | Bucket Group-Hoe; -Heavy-Duty | 1 |
| 12***64 | Bucket Group-Hoe; -Heavy-Duty | 1 |
| 12***35 | Pin | 1 |
137-1069 Bucket Gp-Hoe
| 13***03 | Tooth-Uni | 1 |
| 13***06 | Tooth Group-Uni | 4 |
| 13***69 | Bucket Group-Hoe | 1 |
249-4221 Bucket Gp-Hoe -Heavy-Duty
| 13***03 | Tooth-Uni | 1 |
| 13***06 | Tooth Group-Uni | 6 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
273-0799 Bucket Gp-Hoe -Heavy-Duty
| 13***03 | Tooth-Uni | 1 |
| 13***06 | Tooth Group-Uni | 5 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
219-3393 Bucket Gp-Hoe -High Capacity
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 20***38 | Pin, . Shoe | 1 |
272-9234 Bucket Gp-Hoe -Heavy-Duty
| 13***03 | Tooth-Uni | 1 |
| 13***06 | Tooth Group-Uni | 4 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
9r-9124 Bucket Gp-Hoe -Heavy-Duty
| 12***01 | Bucket Group-Hoe; -Heavy-Duty | 1 |
| 12***35 | Pin | 1 |
| 6V***13 | Ring-Retaining | 2 |
151-7889 Bucket Gp-Hoe -High Capacity
| 13***03 | Tooth-Uni | 1 |
| 13***06 | Tooth Group-Uni | 4 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
128-7663 Bucket Gp-Hoe -Heavy-Duty
| 12***63 | Bucket Group-Hoe; -Heavy-Duty | 1 |
| 13***09 | Bucket Group-Hoe; -Heavy-Duty | 1 |
| 13***03 | Tooth-Uni | 1 |
136-2169 Bucket Gp-Hoe -Heavy-Duty
| 13***69 | Bucket Group-Hoe; -Heavy-Duty | 1 |
| 13***93 | Bucket As-Hoe | 1 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
136-6897 Bucket Gp-Hoe
| 13***97 | Bucket Group-Hoe | 1 |
| 13***07 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
9r-9024 Bucket Gp-Hoe -Heavy-Duty
| 13***03 | Tooth-Uni | 1 |
| 13***06 | Tooth Group-Uni | 4 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
151-7887 Bucket Gp-Hoe -High Capacity
| 13***03 | Tooth-Uni | 1 |
| 13***06 | Tooth Group-Uni | 3 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
136-6898 Bucket Gp-Hoe
| 13***98 | Bucket Group-Hoe | 1 |
| 13***08 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
200-2197 Bucket Gp-Hoe
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 20***97 | Bucket Group-Hoe | 1 |
273-0093 Bucket Gp-Hoe -Heavy-Duty
| 13***03 | Tooth-Uni | 1 |
| 13***06 | Tooth Group-Uni | 4 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
134-5868 Bucket Gp-Hoe -Heavy-Duty
| 13***68 | Bucket Group-Hoe; -Heavy-Duty | 1 |
| 13***70 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 1U***02 | Tip-Penetration; (Long) | 5 |
131-2107 Bucket Gp-Hoe -Heavy-Duty
| 13***07 | Bucket Group-Hoe; -Heavy-Duty | 1 |
| 13***72 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
273-3791 Bucket Gp-Hoe
| 09***20 | Pin-Cotter | 2 |
| 22***16 | Clam As-Multipurpose Bucket | 1 |
| 22***35 | Bulldozer As | 1 |
134-5870 Bucket Gp-Hoe -Heavy-Duty
| 13***70 | Bucket Group-Hoe; -Heavy-Duty | 1 |
| 13***01 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 1U***02 | Tip-Penetration; (Long) | 5 |
131-2120 Bucket Gp-Hoe -Heavy-Duty
| 13***20 | Bucket Group-Hoe; -Heavy-Duty | 1 |
| 13***74 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
219-3392 Bucket Gp-Hoe -High Capacity
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 20***38 | Pin, . Shoe | 1 |
136-6912 Bucket Gp-Hoe -Heavy-Duty
| 13***12 | Bucket Group-Hoe; -Heavy-Duty | 1 |
| 13***43 | Bucket As-Hoe; -Extreme Service | 1 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
272-6410 Bucket Gp-Hoe -Heavy-Duty
| 13***03 | Tooth-Uni | 1 |
| 13***06 | Tooth Group-Uni | 5 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
134-5869 Bucket Gp-Hoe -Heavy-Duty
| 13***69 | Bucket Group-Hoe; -Heavy-Duty | 1 |
| 13***71 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 1U***02 | Tip-Penetration; (Long) | 6 |
136-6900 Bucket Gp-Hoe
| 13***00 | Bucket Group-Hoe | 1 |
| 13***10 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
273-3701 Bucket Gp-Hoe -Heavy-Duty
| 13***03 | Tooth-Uni | 1 |
| 13***06 | Tooth Group-Uni | 3 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
137-4691 Bucket Gp-Hoe
| 13***03 | Tooth-Uni | 1 |
| 13***06 | Tooth Group-Uni | 5 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
136-6911 Bucket Gp-Hoe -Heavy-Duty
| 13***11 | Bucket Group-Hoe; -Heavy-Duty | 1 |
| 13***42 | Bucket As-Hoe; -Extreme Service | 1 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
273-0042 Bucket Gp-Hoe -Heavy-Duty
| 13***03 | Tooth-Uni | 1 |
| 13***06 | Tooth Group-Uni | 3 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
127-7011 Bucket Gp-Hoe -Heavy-Duty
| 12***11 | Bucket Group-Hoe; -Heavy-Duty | 1 |
| 12***65 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 13***03 | Tooth-Uni | 1 |
136-4200 Bucket Gp-Hoe -Heavy-Duty
| 13***00 | Bucket Group-Hoe; -Heavy-Duty | 1 |
| 13***94 | Bucket As-Hoe | 1 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
104-6310 Fork Gp
| 09***37 | Service Group-Fork Positioner | 1 |
| 09***45 | Washer; (16.6x24x1.2-mm Thk) | 1 |
| 10***10 | Fork Group; Fork Gp | 1 |
6w-8900 Fork Gp-Pallet
| 03***32 | Strap--Harness Assembly To Compressor | 9 |
| 10***11 | Retainer As | 2 |
| 10***12 | Chain | 1 |
6w-8933 Fork Gp-Pallet
| 16***43 | Block | 2 |
| 16***51 | Hook As | 1 |
| 18***26 | Hook | 1 |
255-9085 Fork Gp -Kit
| 10***15 | Film; (Reflector) | 1 |
| 21***25 | Guard Group-Bucket | 1 |
| 25***85 | Fork Group; -Kit | 1 |
6w-9739 Fork Gp-Pallet
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 16 |
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 2 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
229-9714 Arm Gp-Material Handling
| 22***24 | Bucket Group-Multipurpose | 1 |
| 22***40 | Cylinder Group-Multipurpose Bukt | 2 |
| 22***14 | Arm Group-Material Handling | 1 |
169-3945 Boom Gp-Truss
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 16***45 | Boom Group-Truss | 1 |
318-7262 Bucket Ar-Multipurpose
| 22***71 | Edge | 1 |
| 24***47 | Plate | 1 |
| 24***48 | Edge | 2 |
318-7256 Bucket Ar-Multipurpose
| 22***71 | Edge | 1 |
| 24***41 | Bracket | 2 |
| 24***42 | Bracket As; (Rh) | 1 |
318-7253 Bucket Ar-Multipurpose
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 22***14 | Bucket Group-Multipurpose | 1 |
318-7254 Bucket Ar-Multipurpose
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 31***54 | Bucket Ar-Multipurpose | 1 |
320-9940 Bucket Ar-Multipurpose -Quick Coupler
| 11***50 | Plate; (Lh) | 1 |
| 32***40 | Bucket Ar-Multipurpose; -Quick Coupler | 1 |
| 9R***11 | Bearing-Sleeve; (57.08 mm Od) | 4 |
318-7255 Bucket Ar-Multipurpose
| 22***34 | Bucket Group-Multipurpose | 1 |
| 22***40 | Cylinder Group-Multipurpose Bukt | 2 |
| 31***55 | Bucket Ar-Multipurpose | 1 |
320-9941 Bucket Ar-Multipurpose -Quick Coupler
| 11***50 | Plate; (Lh) | 1 |
| 32***41 | Bucket Ar-Multipurpose; -Quick Coupler | 1 |
| 9R***11 | Bearing-Sleeve; (57.08 mm Od) | 4 |
245-3650 Bucket As-General Purpose
| 11***50 | Plate; (Lh) | 1 |
| 24***50 | Bucket As-General Purpose | 1 |
| 9R***11 | Bearing-Sleeve; (57.08 mm Od) | 4 |
245-3640 Bucket As-General Purpose
| 11***50 | Plate; (Lh) | 1 |
| 24***40 | Bucket As-General Purpose | 1 |
| 9R***11 | Bearing-Sleeve; (57.08 mm Od) | 4 |
136-6910 Bucket As-Hoe -Heavy-Duty
| 12***94 | Edge | 1 |
| 13***10 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 15***02 | Bracket As; (Lh) | 1 |
272-9235 Bucket As-Hoe -Heavy-Duty
| 24***11 | Plate | 4 |
| 27***18 | Edge; (Rh) | 1 |
| 27***19 | Edge; (Lh) | 1 |
136-6893 Bucket As-Hoe
| 11***04 | Adapter-Strap | 5 |
| 13***80 | Edge | 1 |
| 13***84 | Edge; (Lh) | 1 |
136-7042 Bucket As-Hoe -Extreme Service
| 13***17 | Edge | 1 |
| 13***42 | Bucket As-Hoe; -Extreme Service | 1 |
| 15***02 | Bracket As; (Lh) | 1 |
9r-9137 Bucket As-Hoe -Heavy-Duty
| 12***53 | Bracket As; (Rh) | 1 |
| 12***55 | Bracket As; (Lh) | 1 |
| 12***45 | Plate | 2 |
134-5872 Bucket As-Hoe -Heavy-Duty
| 11***04 | Adapter-Strap | 6 |
| 13***72 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 13***82 | Edge; (Center) | 1 |
134-5876 Bucket As-Hoe -Heavy-Duty
| 11***05 | Adapter-Strap | 3 |
| 13***76 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 13***50 | Edge | 2 |
134-5871 Bucket As-Hoe -Heavy-Duty
| 11***04 | Adapter-Strap | 5 |
| 13***71 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 13***81 | Edge; (Center) | 1 |
219-3368 Bucket As-Hoe -High Capacity
| 13***89 | Edge | 1 |
| 20***35 | Adapter; (2-Strap) | 5 |
| 21***68 | Bucket As-Hoe; -High Capacity | 1 |
249-4220 Bucket As-Hoe -Heavy-Duty
| 24***20 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 27***16 | Plate | 4 |
| 27***18 | Edge; (Rh) | 1 |
9r-9131 Bucket As-Hoe -Heavy-Duty
| 11***05 | Adapter-Strap | 3 |
| 12***05 | Bracket As; (Lh) | 1 |
| 12***07 | Bracket As; (Rh) | 1 |
200-2202 Bucket As-Hoe
| 13***84 | Edge; (Lh) | 1 |
| 13***85 | Edge; (Rh) | 1 |
| 15***02 | Bracket As; (Lh) | 1 |
100-6001 Bucket As-Hoe -Heavy-Duty
| 10***01 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 12***53 | Bracket As; (Rh) | 1 |
| 12***55 | Bracket As; (Lh) | 1 |
136-4201 Bucket As-Hoe -Heavy-Duty
| 11***05 | Adapter-Strap | 5 |
| 13***01 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 13***85 | Plate | 2 |
272-7873 Bucket As-Hoe -Heavy-Duty
| 20***35 | Adapter; (2-Strap) | 3 |
| 24***07 | Edge; (Rh) | 1 |
| 24***09 | Plate As; (Rh) | 1 |
192-0661 Bucket As-Hoe -Ditch Cleaning
| 12***78 | Edge | 1 |
| 19***61 | Bucket As-Hoe; -Ditch Cleaning | 1 |
| 20***00 | Plate | 2 |
200-2199 Bucket As-Hoe
| 13***84 | Edge; (Lh) | 1 |
| 13***85 | Edge; (Rh) | 1 |
| 15***02 | Bracket As; (Lh) | 1 |
130-2053 Bucket As-Hoe -Heavy-Duty
| 12***18 | Edge | 1 |
| 13***53 | Bucket As-Hoe; -Heavy-Duty | 1 |
136-6895 Bucket As-Hoe
| 11***04 | Adapter-Strap | 6 |
| 13***82 | Edge; (Center) | 1 |
| 13***84 | Edge; (Lh) | 1 |
123-6744 Bucket As-Hoe -Heavy-Duty
| 12***44 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 12***05 | Bracket As; (Lh) | 1 |
| 12***07 | Bracket As; (Rh) | 1 |
273-0043 Bucket As-Hoe -Heavy-Duty
| 27***43 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 27***62 | Edge | 1 |
200-2201 Bucket As-Hoe
| 13***84 | Edge; (Lh) | 1 |
| 13***85 | Edge; (Rh) | 1 |
| 15***02 | Bracket As; (Lh) | 1 |
128-3055 Bucket As-Hoe -Heavy-Duty
| 12***55 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 13***57 | Edge | 1 |
| 13***84 | Plate-Wear | 2 |
124-4902 Bucket As-Hoe -Heavy-Duty
| 12***53 | Bracket As; (Rh) | 1 |
| 12***55 | Bracket As; (Lh) | 1 |
| 12***02 | Bucket As-Hoe; -Heavy-Duty | 1 |
272-6411 Bucket As-Hoe -Heavy-Duty
| 27***11 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 27***14 | Plate | 4 |
| 27***18 | Edge; (Rh) | 1 |
9r-9119 Bucket As-Hoe -Heavy-Duty
| 10***02 | Edge | 1 |
| 9R***30 | Bearing-Sleeve; (Sleeve) | 1 |
| 9R***31 | Bearing-Sleeve; (Sleeve) | 2 |
273-3793 Bucket As-Hoe
| 13***03 | Tooth-Uni | 1 |
| 13***06 | Tooth Group-Uni | 3 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
136-6907 Bucket As-Hoe -Heavy-Duty
| 11***04 | Adapter-Strap | 4 |
| 13***07 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 13***46 | Edge-Cutting | 1 |
272-9609 Bucket As-Hoe -Heavy-Duty
| 27***69 | Plate | 4 |
| 27***18 | Edge; (Rh) | 1 |
| 27***19 | Edge; (Lh) | 1 |
136-6908 Bucket As-Hoe -Heavy-Duty
| 11***04 | Adapter-Strap | 5 |
| 13***08 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 13***47 | Edge-Cutting | 1 |
128-3780 Bucket As-Hoe -Heavy-Duty
| 12***80 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 13***17 | Edge | 1 |
| 13***19 | Plate | 1 |
130-2056 Bucket As-Hoe
| 11***04 | Adapter-Strap | 3 |
| 13***56 | Bucket As-Hoe | 1 |
| 13***77 | Edge | 1 |
273-0863 Bucket As-Hoe -Heavy-Duty
| 27***63 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 27***66 | Edge | 1 |
136-6909 Bucket As-Hoe -Heavy-Duty
| 12***78 | Edge | 1 |
| 13***09 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 15***02 | Bracket As; (Lh) | 1 |
151-7829 Bucket As-Hoe -High Capacity
| 13***66 | Edge-Cutting | 1 |
| 15***29 | Bucket As-Hoe; -High Capacity | 1 |
| 19***53 | Plate; (Torque) | 1 |
151-7830 Bucket As-Hoe -High Capacity
| 12***38 | Edge-Cutting | 1 |
| 15***30 | Bucket As-Hoe; -High Capacity | 1 |
| 19***54 | Plate; (Torque) | 1 |
273-2961 Bucket As-Hoe -Heavy-Duty
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 24***50 | Bucket As-General Purpose | 1 |
9r-9019 Bucket As-Hoe -Heavy-Duty
| 11***51 | Plate; (Lh) | 1 |
| 9R***11 | Bearing-Sleeve; (57.08 mm Od) | 4 |
| 9R***92 | Bearing-Sleeve; (62.09 mm Od) | 2 |
219-3369 Bucket As-Hoe -High Capacity
| 13***90 | Edge | 1 |
| 20***35 | Adapter; (2-Strap) | 6 |
| 21***69 | Bucket As-Hoe; -High Capacity | 1 |
192-0658 Bucket As-Hoe -Ditch Cleaning
| 19***59 | Bracket As | 2 |
| 19***58 | Bucket As-Hoe; -Ditch Cleaning | 1 |
| 19***63 | Plate; (Torque) | 1 |
151-7832 Bucket As-Hoe -High Capacity
| 12***38 | Edge-Cutting | 1 |
| 15***32 | Bucket As-Hoe; -High Capacity | 1 |
| 19***54 | Plate; (Torque) | 1 |
219-3366 Bucket As-Hoe -High Capacity
| 20***35 | Adapter; (2-Strap) | 5 |
| 21***66 | Bucket As-Hoe; -High Capacity | 1 |
| 21***88 | Edge | 1 |
273-1949 Bucket As-Hoe
| 15***57 | Bearing-Sleeve | 1 |
| 27***18 | Edge; (Rh) | 1 |
| 27***19 | Edge; (Lh) | 1 |
136-6894 Bucket As-Hoe
| 11***04 | Adapter-Strap | 5 |
| 13***81 | Edge; (Center) | 1 |
| 13***84 | Edge; (Lh) | 1 |
273-0094 Bucket As-Hoe -Heavy-Duty
| 27***94 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 27***63 | Edge | 1 |
273-1958 Bucket As-Hoe
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 24***40 | Bucket As-General Purpose | 1 |
273-3733 Bucket As-Hoe -Heavy-Duty
| 10***01 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 13***03 | Tooth-Uni | 1 |
| 13***06 | Tooth Group-Uni | 3 |
136-6892 Bucket As-Hoe
| 11***04 | Adapter-Strap | 4 |
| 13***79 | Edge | 1 |
| 13***84 | Edge; (Lh) | 1 |
134-1557 Bucket As-Hoe
| 11***04 | Adapter-Strap | 4 |
| 13***57 | Bucket As-Hoe | 1 |
| 13***79 | Edge | 1 |
200-2200 Bucket As-Hoe
| 13***84 | Edge; (Lh) | 1 |
| 13***85 | Edge; (Rh) | 1 |
| 15***02 | Bracket As; (Lh) | 1 |
192-0660 Bucket As-Hoe -Ditch Cleaning
| 15***55 | Edge | 1 |
| 19***60 | Bucket As-Hoe; -Ditch Cleaning | 1 |
192-2826 Bucket As-Hoe -Ditch Cleaning
| 13***17 | Edge | 1 |
| 19***26 | Bucket As-Hoe; -Ditch Cleaning | 1 |
| 20***02 | Plate | 2 |
136-2171 Bucket As-Hoe -Heavy-Duty
| 11***05 | Adapter-Strap | 5 |
| 13***71 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 13***85 | Plate | 2 |
136-6891 Bucket As-Hoe
| 11***05 | Adapter-Strap | 6 |
| 13***85 | Plate | 2 |
| 13***90 | Edge | 1 |
136-2170 Bucket As-Hoe -Heavy-Duty
| 11***05 | Adapter-Strap | 4 |
| 13***70 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 13***85 | Plate | 2 |
273-0800 Bucket As-Hoe -Heavy-Duty
| 27***00 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 27***65 | Edge | 1 |
131-2121 Bucket As-Hoe
| 11***04 | Adapter-Strap | 3 |
| 13***21 | Bucket As-Hoe | 1 |
| 13***78 | Edge | 1 |
134-5875 Bucket As-Hoe -Heavy-Duty
| 11***05 | Adapter-Strap | 5 |
| 12***51 | Edge; (Rh) | 1 |
| 12***53 | Bracket As; (Rh) | 1 |
273-1951 Bucket As-Hoe
| 15***57 | Bearing-Sleeve | 1 |
| 27***51 | Bucket As-Hoe | 1 |
| 27***30 | Edge | 1 |
191-6263 Bucket As-Hoe -Ditch Cleaning
| 19***63 | Bucket As-Hoe; -Ditch Cleaning | 1 |
| 19***63 | Plate; (Torque) | 1 |
| 19***67 | Edge-Cutting | 1 |
128-7665 Bucket As-Hoe -Heavy-Duty
| 12***78 | Edge | 1 |
| 12***65 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 13***84 | Plate-Wear | 2 |
134-5873 Bucket As-Hoe -Heavy-Duty
| 11***05 | Adapter-Strap | 5 |
| 12***51 | Edge; (Rh) | 1 |
| 12***53 | Bracket As; (Rh) | 1 |
273-1375 Bucket As-Hoe
| 15***57 | Bearing-Sleeve | 1 |
| 20***35 | Adapter; (2-Strap) | 3 |
| 24***07 | Edge; (Rh) | 1 |
191-6261 Bucket As-Hoe -Ditch Cleaning
| 13***66 | Edge-Cutting | 1 |
| 19***53 | Plate; (Torque) | 1 |
| 19***61 | Bucket As-Hoe; -Ditch Cleaning | 1 |
9r-9037 Bucket As-Hoe -Heavy-Duty
| 11***51 | Plate; (Lh) | 1 |
| 9R***11 | Bearing-Sleeve; (57.08 mm Od) | 4 |
| 9R***92 | Bearing-Sleeve; (62.09 mm Od) | 2 |
136-7043 Bucket As-Hoe -Extreme Service
| 13***57 | Edge | 1 |
| 13***43 | Bucket As-Hoe; -Extreme Service | 1 |
| 15***02 | Bracket As; (Lh) | 1 |
191-9555 Bucket As-Hoe -Ditch Cleaning
| 13***91 | Edge-Cutting | 1 |
| 19***55 | Plate; (Torque) | 1 |
| 19***55 | Bucket As-Hoe; -Ditch Cleaning | 1 |
219-3367 Bucket As-Hoe -High Capacity
| 13***87 | Edge | 1 |
| 20***35 | Adapter; (2-Strap) | 4 |
| 21***67 | Bucket As-Hoe; -High Capacity | 1 |
9r-9031 Bucket As-Hoe -Heavy-Duty
| 11***51 | Plate; (Lh) | 1 |
| 9R***11 | Bearing-Sleeve; (57.08 mm Od) | 4 |
| 9R***92 | Bearing-Sleeve; (62.09 mm Od) | 2 |
192-2825 Bucket As-Hoe -Ditch Cleaning
| 12***94 | Edge | 1 |
| 19***25 | Bucket As-Hoe; -Ditch Cleaning | 1 |
| 20***01 | Plate | 2 |
200-2198 Bucket As-Hoe
| 13***57 | Edge | 1 |
| 20***98 | Bucket As-Hoe | 1 |
| 20***03 | Plate | 2 |
192-0657 Bucket As-Hoe -Ditch Cleaning
| 19***59 | Bracket As | 2 |
| 19***57 | Bucket As-Hoe; -Ditch Cleaning | 1 |
| 19***62 | Plate; (Torque) | 1 |
134-2513 Bucket As-Hoe
| 11***04 | Adapter-Strap | 5 |
| 13***13 | Bucket As-Hoe | 1 |
| 13***80 | Edge | 1 |
191-6262 Bucket As-Hoe -Ditch Cleaning
| 19***62 | Bucket As-Hoe; -Ditch Cleaning | 1 |
| 19***62 | Plate; (Torque) | 1 |
| 19***66 | Edge-Cutting | 1 |
134-5874 Bucket As-Hoe -Heavy-Duty
| 11***05 | Adapter-Strap | 6 |
| 12***51 | Edge; (Rh) | 1 |
| 12***53 | Bracket As; (Rh) | 1 |
151-7831 Bucket As-Hoe -High Capacity
| 13***91 | Edge-Cutting | 1 |
| 15***31 | Bucket As-Hoe; -High Capacity | 1 |
| 19***55 | Plate; (Torque) | 1 |
9r-9025 Bucket As-Hoe -Heavy-Duty
| 11***51 | Plate; (Lh) | 1 |
| 9R***11 | Bearing-Sleeve; (57.08 mm Od) | 4 |
| 9R***92 | Bearing-Sleeve; (62.09 mm Od) | 2 |
9r-9125 Bucket As-Hoe -Heavy-Duty
| 11***05 | Adapter-Strap | 4 |
| 12***51 | Edge; (Rh) | 1 |
| 12***53 | Bracket As; (Rh) | 1 |
248-0961 Bucket Gp-General Purpose
| 13***03 | Tooth-Uni | 1 |
| 13***06 | Tooth Group-Uni | 4 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
248-0962 Bucket Gp-General Purpose
| 13***03 | Tooth-Uni | 1 |
| 13***06 | Tooth Group-Uni | 5 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
220-4634 Bucket Gp-Multipurpose
| 16***89 | Tack-Fastener | 4 |
| 22***34 | Bucket Group-Multipurpose | 1 |
| 25***09 | Plate-Instruction | 1 |
220-4624 Bucket Gp-Multipurpose
| 22***24 | Bucket Group-Multipurpose | 1 |
| 22***88 | Bracket As; (Rh) | 1 |
| 22***90 | Bracket As; (Lh) | 1 |
220-4614 Bucket Gp-Multipurpose
| 22***14 | Bucket Group-Multipurpose | 1 |
| 22***82 | Bracket As; (Rh) | 1 |
| 22***87 | Bracket As; (Lh) | 1 |
220-4635 Bulldozer As
| 09***28 | Fitting-Grease | 1 |
| 13***21 | Pin As; (Hook) | 1 |
| 13***23 | Lock Pin | 1 |
220-4625 Bulldozer As -Multipurpose Bucket
| 09***28 | Fitting-Grease | 1 |
| 13***21 | Pin As; (Hook) | 1 |
| 13***23 | Lock Pin | 1 |
220-4615 Bulldozer As
| 22***15 | Bulldozer As | 1 |
| 22***70 | Plate As | 1 |
| 22***71 | Edge | 1 |
6w-8832 Carriage As-Fork -Quick Coupler
| 13***77 | Pin | 1 |
| 13***78 | Pin | 1 |
| 17***47 | Coupler Group-Quick; -Backhoe | 1 |
220-4616 Clam As-Multipurpose Bucket
| 13***77 | Pin | 1 |
| 13***78 | Pin | 1 |
| 17***51 | Coupler Group-Quick; -Backhoe | 1 |
178-8849 Coupler Gp-Quick -Backhoe
| 17***69 | Cover | 1 |
| 17***49 | Coupler Group-Quick; -Backhoe | 1 |
| 21***00 | Coupler As | 1 |
213-8008 Coupler Gp-Quick
| 10***11 | Bracket As | 2 |
| 10***12 | Fork As | 2 |
| 10***16 | Pin | 1 |
176-6251 Coupler Gp-Quick -Backhoe
| 09***28 | Fitting-Grease | 1 |
| 13***21 | Lever-Actuating | 1 |
| 17***51 | Coupler Group-Quick; -Backhoe | 1 |
178-8850 Coupler Gp-Quick -Backhoe
| 13***77 | Pin | 1 |
| 13***78 | Pin | 1 |
| 17***51 | Coupler Group-Quick; -Backhoe | 1 |
176-6247 Coupler Gp-Quick -Backhoe
| 17***47 | Coupler Group-Quick; -Backhoe | 1 |
| 21***08 | Coupler Group-Quick; -Jcb | 1 |
| 21***74 | Pin | 2 |
213-8000 Coupler Gp-Quick -Jcb
| 21***00 | Coupler Group-Quick; -Jcb | 1 |
| 22***91 | Edge | 2 |
| 3F***08 | Bolt-Plow; (5/8-11x2.25-In) | 8 |
217-1482 Coupler Gp-Quick
| 10***10 | Fork Group; Fork Gp | 1 |
| 17***93 | Bumper; (Rubber) | 4 |
| 21***82 | Coupler Group-Quick | 1 |
318-9901 Coupler Gp-Quick -Backhoe
| 09***37 | Service Group-Fork Positioner | 1 |
| 09***45 | Washer; (16.6x24x1.2-mm Thk) | 1 |
| 31***01 | Coupler Group-Quick; -Backhoe | 1 |
220-4758 Edge Gp-Cutting
| 09***37 | Service Group-Fork Positioner | 1 |
| 09***45 | Washer; (16.6x24x1.2-mm Thk) | 1 |
| 22***58 | Edge Group-Cutting | 1 |
214-7025 Guard Gp-Bucket
| 15***79 | Pin | 1 |
| 15***80 | Pin | 1 |
| 21***25 | Guard Group-Bucket | 1 |
214-7024 Guard Gp-Bucket
| 15***79 | Pin | 1 |
| 21***24 | Guard Group-Bucket | 1 |
| 3B***19 | Pin-Cotter | 4 |
169-6460 Hook Gp-Lifting
| 16***60 | Hook Group-Lifting | 1 |
| 21***96 | Pin As | 2 |
| 22***08 | Washer; (51x85x1-mm Thk) | 4 |
301-2319 Kit-Quick Coupler
| 30***19 | Kit-Quick Coupler | 1 |
| 3B***19 | Pin-Cotter | 2 |
| 9R***58 | Washer; (46x69x3-mm Thk) | 2 |
217-1483 Mounting Gp-Bucket
| 21***83 | Mounting Group-Bucket | 1 |
| 22***79 | Bracket As | 1 |
| 22***80 | Plate | 4 |
178-3593 Mounting Gp-Bucket -Backhoe, Quick Coupler
| 10***11 | Bracket As | 2 |
| 10***16 | Pin | 1 |
| 10***17 | Pin | 2 |
318-9902 Mounting Gp-Bucket -Backhoe, Quick Coupler
| 20***18 | Floor Mat Group | 1 |
| 20***00 | Console Group-Operator; -Rh | 1 |
| 20***01 | Protection Group-Vandalism; -Rotating Guard | 1 |
137-3848 Mounting Gp-Bucket -Backhoe, Quick Coupler
| 13***48 | Mounting Group-Bucket; -Backhoe, Quick Coupler | 1 |
| 15***79 | Pin | 1 |
| 15***80 | Pin | 1 |
223-1882 Mounting Gp-Bucket -Backhoe
| 13***03 | Tooth-Uni | 8 |
| 22***82 | Mounting Group-Bucket; -Backhoe | 1 |
| 4F***57 | Bolt-Plow; (5/8-11x2.75-In) | 16 |
252-6005 Mounting Gp-Fork -Multipurpose Bucket
| 20***18 | Floor Mat Group | 1 |
| 20***00 | Console Group-Operator; -Rh | 1 |
| 20***01 | Protection Group-Vandalism; -Rotating Guard | 1 |
255-9083 Mounting Gp-Fork
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
9r-5866 Tooth Gp-Uni
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 2 |
| 31***18 | Valve As-Pressure Relief; (Refrigerant Compressor) | 1 |
444E serial number reference
On the 444E the PIN/serial plate is riveted to the left side of the front frame, near the cab, generally readable from ground level; Caterpillar also cross-stamps the full PIN directly into the frame steel nearby as a backup. The plate shows the full product identification number -- the first three characters are the letter prefix (model/build series), followed by the sequential machine serial number, e.g. LBE00001.
| Prefix | Identifies | Notes |
|---|---|---|
| LBE | 444E Backhoe Loader, Parallel Lift Side Shift Boom | Fitted with the 3054C DIT turbocharged diesel, meeting Stage II emissions per EU Directive 97/68/EC. Earliest production series on the 444E, ahead of the switch to the C4.4 engine. Built at the Desford (Leicester, UK) backhoe loader plant. |
| NBA | 444E Backhoe Loader, Side Shift Boom | Fitted with the C4.4 turbocharged diesel. C4.4-powered 444E machines meet Stage IIIA/Tier 3 emissions per EU Directive 2004/26/EC. Boom/loader spec matches the Side Shift line shared across the 4-Series (420E-444E) range. Exact build-year window not documented in public listings -- confirm with dealer. |
| HXB | 444E Backhoe Loader, Side Shift Boom | Fitted with the C4.4 turbocharged diesel, meeting Stage IIIA/Tier 3 emissions per EU Directive 2004/26/EC. Later production series than LBE. Built at the Desford (Leicester, UK) plant. |
Frequently asked questions
What engine does the Caterpillar 444E use?
It depends on the build. Early machines with the LBE serial prefix run the mechanically governed Cat 3054C DIT turbocharged diesel, with no engine electronics, at about 76 kW (102 hp) gross. Later machines with the NBA and HXB prefixes switch to the electronically controlled Cat C4.4 turbocharged and aftercooled diesel built to Stage IIIA/Tier 3, at a similar power rating on roughly the same 4.4-liter displacement. Confirm the engine from the serial prefix before ordering parts.
What is the operating weight of the Caterpillar 444E?
About 8,810 kg (19,423 lb) in standard four-wheel-drive configuration. Actual weight varies with cab versus canopy, the extendable dipper stick (E-Stick), tire choice, and attached work tools, so treat that figure as a baseline rather than a fixed number.
What replaced the Caterpillar 444E?
The 444F took over as the next generation, keeping the C4.4 engine option in an updated chassis. Caterpillar has since continued the 444 name on a current Stage V, C3.6-powered side-shift backhoe loader, so confirm the exact generation before cross-shopping specs or parts.
What 444E owners discuss
What's the most common transmission complaint on the 444E's powershift, and what usually causes it?
Owners most often report the transmission popping out of gear (typically 3rd or 4th) or hesitating to engage. The usual root cause is the transmission neutralizer switch sticking or its wiring shorting, not the clutch packs themselves. Worn shift linkage and low or contaminated transmission-hydraulic fluid are the next most common causes. Confirm clutch modulation pressure with the electronic service tool before committing to a transmission teardown.
The backhoe or loader loses power under load — what should be checked before condemning the hydraulic pump?
Weak lift or dig force under load is usually traced to a worn control-valve spool or an internal cylinder seal leak rather than outright pump failure. These machines run a shared pilot-pressure circuit, so a drop in pilot supply pressure can make several functions in one valve bank feel weak at once, which is often mistaken for a pump problem. Check fluid level and condition and confirm system relief and pilot pressures against spec before replacing the pump. Have your dealer verify relief and pilot pressures on a gauge before returning the machine to digging duty.
What wear pattern shows up first on the 444E's backhoe and loader linkage?
Play or a knock in the boom foot, dipper, and bucket linkage pins is the first sign reported, since these pins run in replaceable bushings that wear before the pin bores themselves do. Stabilizer pads and the extendable-stick slide pads are adjustable and need periodic take-up; letting that slop go unchecked accelerates bore wear. Sticking to the greasing interval in the operation and maintenance manual matters more here than on loader-only machines, because backhoe pins see full digging shock load.
Does the 444E's engine change across the production run, and does that change what typically goes wrong?
Yes. Earlier-production 444E machines use the mechanically governed Cat 3054C DIT with a pump-and-nozzle fuel system and no engine electronics. Later-production machines switch to the electronically controlled Cat C4.4. On the 3054C DIT machines, hard starting, rough idle, and power loss trace most often to fuel filter restriction or dirty/worn injector nozzles, and high-hour or previously overheated units are more prone to head-gasket coolant leaks. On the C4.4-equipped later machines the failure pattern shifts toward electronic sensor and wiring faults rather than pure fuel-mechanical issues. Confirm which engine is fitted before troubleshooting since the fixes don't cross over.
What's distinctive about the 444E's braking and 4WD setup that owners should know?
All Wheel Braking is standard across the 444E line. In two-wheel-drive mode, applying the brakes automatically engages four-wheel drive so all four wheels share braking effort. This is normal behavior, not a fault, but it means unexpected 4WD engagement during braking on a machine set to 2WD is by design. Have your dealer verify the all-wheel-brake linkage and 4WD engagement if the transition feels delayed or harsh, since that circuit affects stopping performance.
What electrical issues come up most on the 444E and the wider E-series backhoe electrical system?
Most dash warning lights trace back to wiring and connectors rather than a failed sensor or control module — a corroded connector pin, a chafed harness section, or a bad ground is the usual find once someone probes the circuit. The transmission neutralizer switch is a specific recurring offender, with a sticking or shorted switch causing both a warning light and unexpected transmission behavior. Treat a fault code as a pointer to start wiring and connector inspection, not as confirmation a part needs replacing.
What should a buyer check before purchasing a used 444E?
Walk the machine for leaks, cracks, and dents before starting it. Start the engine cold, listen for unusual noise, check for smoke, and confirm easy starting. Pull the oil and coolant and check for cross-contamination, a sign of head-gasket trouble. Cycle the loader and backhoe through full range checking for jerky movement or hose and cylinder-seal leaks, and check hydraulic fluid level and condition with cylinders retracted. Check boom, stick, and bucket linkage pins for play, and inspect for welds or repairs on the boom, loader arms, or bucket, a sign of prior structural failure. Test brakes and 4WD engagement and run the transmission through all gears in both directions. Confirm which engine is fitted, 3054C DIT or C4.4, by serial prefix, and match the service and oil-sample history to that engine. Request full maintenance records before finalizing a deal.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 444E part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.