Caterpillarbackhoe loader(no series)
Caterpillar 424D
Maintenance schedule, common problems & OEM parts breakdown
The Cat 424D is a mid-size 4x4 backhoe loader from Caterpillar's D-series line, built roughly 2000-2006 and slotted between the smaller 420D and larger 428D. It runs Caterpillar's 4.2 L (256 cu in) 3054-family four-cylinder naturally aspirated diesel: early BGP-prefix machines left the factory with the base 3054, production shifted to the 3054B partway through that same serial run and continued through BKR-prefix units, and later CJZ/RXA-prefix machines carry the 3054C. Rated output holds steady across the changes at roughly 55 kW (74 hp) net and 57 kW (77 hp) gross at 2200 rpm, driving a 4-speed power-shuttle transmission with torque converter and full synchromesh. Operating weight spans about 7,115-9,800 kg (15,700-21,600 lb) depending on configuration - Cat offered the 424D as 2WD or 4WD, with center-pivot or side-shift backhoe mounting and an optional extendable dipper stick, plus stackable counterweights to tune front and rear balance.
The running change through the model's life was the engine revision, not a body or capacity redesign: 3054 to 3054B to 3054C tracked emissions and durability updates rather than a horsepower jump. Caterpillar didn't carry the 424 number forward when the D-series gave way to the E-series around 2006 - the similarly sized 422E, built on the same 3054C engine, took over that spot in the North American lineup while 420D and 428D continued on as 420E and 428E. A current 424 or 424B side-shift loader sold in some regions today reuses the number on an unrelated, newer machine and is not a continuation of this D-series model. In the used and parts market the 424D still shows up regularly on job sites and resale lots: its engine, power-shuttle transmission and hydraulics are shared across the D-series family, which keeps parts sourcing and shop familiarity strong, and because it predates Tier 4 aftertreatment its upkeep stays simpler and cheaper than a comparable modern machine.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 424D specifications
Engine
| Engine model | Caterpillar 3054-family naturally aspirated, direct-injection 4-cylinder diesel: early-production serial ranges carry the base 3054, mid-production shifts to 3054B, later-production serial ranges carry the 3054C (see serial number identification for exact ranges) |
| Gross power | 58 kW (77 hp) at 2200 rpm |
| Net power | 55 kW (74 hp) at 2200 rpm, per ISO 9249 and EEC 80/1269 |
| Displacement | 4.2 L (256 cu in); bore 103 mm x stroke 127 mm |
| Emissions | Meets 97/68/EC non-road diesel emissions requirements |
| Torque rise | 21% at the 55 kW (74 hp) net rating |
Weights
| Standard operating weight | 7502 kg (16,540 lb) - single-tilt loader with 1.0 m3 general-purpose bucket, 610 mm standard-duty backhoe bucket, 80 kg operator, full fuel tank |
| Operating weight range | 7115-9800 kg (15,687-21,605 lb) depending on cab/canopy, drive, bucket and counterweight configuration |
| Configuration weight deltas | ROPS canopy in place of cab: -234 kg (-516 lb); air conditioning: +45 kg (+99 lb); All Wheel Drive: +106 kg (+234 lb) |
| Maximum gross vehicle weight | 9800 kg (21,605 lb), not to be exceeded |
Dimensions
| Transport length | 5760 mm (18.90 ft) with general-purpose bucket; 5685 mm (18.65 ft) with multi-purpose bucket |
| Transport height | 3740 mm (12.27 ft), same figure for standard or extendible stick |
| Transport width | 2396 mm (7.86 ft) standard frame with general-purpose bucket, 2406 mm (7.89 ft) with multi-purpose bucket; narrow-frame option 2262 mm (7.42 ft) |
| Wheelbase | 2100 mm (6.89 ft), All Wheel Drive configuration |
| Ground clearance | 320 mm (12.6 in) minimum |
| Wheel tread gauge | Front 1780 mm (5.84 ft), rear 1714 mm (5.62 ft) |
| Height to top of cab/canopy | 2900 mm (9.51 ft) |
| Turning radius | 8.1 m (26.6 ft) outside front wheels; 10.7 m (35.1 ft) outside widest loader bucket |
Performance
| Travel speeds (Power Shuttle, 4-speed) | 1st 5.7 km/h (3.5 mph), 2nd 9.1 km/h (5.7 mph), 3rd 18.7 km/h (11.6 mph), 4th 31.8 km/h (19.8 mph); forward and reverse speeds are symmetric, no 5th gear |
| Backhoe digging depth | Standard stick 4854 mm (15.93 ft); extendible stick 4916 mm retracted / 5894 mm extended (19.34 ft) |
| Backhoe dig force (standard stick) | Bucket 52.1 kN (11,712 lbf); stick 34.9 kN (7,846 lbf) |
| Loader breakout force | 38.0-39.5 kN (8,543-8,880 lbf), varies by bucket configuration |
| Loader lift capacity at max height | 2256-2454 kg (4,974-5,411 lb), varies by bucket configuration |
| Backhoe swing arc / bucket rotation | 180 degree swing arc; 205 degree bucket rotation from a single pin location |
| Steering | Full hydrostatic, front-wheel, 50 degree steering angle |
| Sound levels | Interior 81 dB(A), exterior 104 dB(A), measured with air conditioning per ISO 6396 / ISO 6395 |
Service capacities (summary)
| Fuel tank | 128 L (33.8 US gal) |
| Cooling system | 15.1 L (4.0 US gal), with air conditioning |
| Engine oil (with filter) | 7.3 L (1.9 US gal) |
| Hydraulic system | 79.0 L (20.9 US gal) total system; 38.0 L (10.0 US gal) hydraulic tank |
| Transmission (Power Shuttle) | 15.0 L (4.0 US gal) 2WD; 18.0 L (4.8 US gal) AWD |
| Axles | Rear axle 24.0 L (6.3 US gal); front axle AWD 7.5 L (2.0 US gal); planetaries 0.8 L each |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
424D fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 7.3 L (1.9 US gal) | Cat DEO (Diesel Engine Oil). SAE 15W-40 for normal ambient range (roughly 0 to 40 C / 32 to 104 F); SAE 10W-30 below 0 C; Cat full-synthetic DEO in 0W-40 or 5W-40 for sustained sub-zero cold starts. |
| Cooling system | 23.6-25.5 L (6.2-6.7 US gal); one cross-reference cites a wider 27-35 L band, likely reflecting a different cab/AC build - treat as varies by configuration | Cat ELC (Extended Life Coolant), premix or 50/50 concentrate with water; rated life around 6 years / 12,000 hours with a mid-life extender at half life. Conventional Cat DEAC (Diesel Engine Antifreeze/Coolant) is an accepted fallback but needs its own supplemental coolant additive top-offs on a shorter interval. |
| Fuel tank | 128 L (33.8 US gal) | Cat-spec ultra-low-sulfur No. 2-D diesel; switch to No. 1-D or a winterized blend below about -7 C (20 F) to prevent fuel gelling/waxing. |
| Transmission (power-shuttle, with torque converter) | About 19-20.5 L (5.0-5.4 US gal); 2WD machines run toward the low end, 4WD toward the high end - varies by configuration | Cat TDTO (Transmission/Drive Train Oil), viscosity graded by ambient temperature: SAE 10W in cold climates, SAE 30 for moderate ambient, SAE 50 in sustained heat. |
| Front axle differential (4WD machines only) | 7.5 L (2.0 US gal) | Cat TDTO, same climate-graded viscosity as the transmission. |
| Front final drives (4WD machines only, each side) | 0.7 L (0.2 US gal) per side | Cat TDTO. |
| Rear axle differential (standard fixed axle, wet-disc service brakes) | 24 L (6.3 US gal) | Cat TDTO with an axle-and-brake additive package. The wet brake discs run submerged in this same oil, so a plain gear oil is not an acceptable substitute here. |
| Rear axle differential + final drives (all-wheel-steer/center-pivot axle option, where fitted) | About 8.3 L (2.2 US gal) at the differential plus roughly 1.6 L (0.4 US gal) per side at the final drives - this axle variant is not fitted to every 424D | A conventional Cat GO gear oil (roughly 80W-90) is cited for this steerable-axle variant; confirm against the serial-specific OMM page since axle architecture varies by build. |
| Hydraulic tank | About 42 L (11.1 US gal) | Cat HYDO Advanced 10, kept in a circuit separate from the TDTO-filled power train on this series. |
| Hydraulic system, total (tank plus lines and cylinders) | About 49 L (12.9 US gal) | Cat HYDO Advanced 10. |
| Grease (chassis and pivot points) | Applied per lube point on the service schedule, not a fill-and-check reservoir | Cat Multipurpose Grease, NLGI 2, for general low-load/high-speed points (roughly -30 to 40 C service range). Cat Advanced 3Moly or Prime Application Grease, NLGI 2 with over 3% moly, for the higher-load loader, boom, stick and stabilizer pins. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 424D maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 3,000 h |
|
| Every 6,000 h |
|
Servicing the 424D beyond the schedule
Predictive Maintenance & Fluid Analysis
Pull oil samples at every engine, hydraulic, transmission, and axle oil change to track the 3054B/3054C block for early liner or injector wear before it reaches the crankcase. Hydraulic and power-shuttle transmission samples flag pump and clutch-pack wear inside the closed-center LSPC system long before symptoms show up at the boom or drivetrain. Coolant samples confirm the extended-life coolant's inhibitor level holds between the long factory drain intervals. Trend front and rear differential and final-drive samples separately, since digging loads wear them unevenly side to side.
Corrective & Common Repairs
Expect backhoe and loader cylinder seal leaks as pin and bushing wear lets rod seals ride unevenly; rebuild the cylinder rather than chase weeping rods. Side-shift and extendable-stick wear pads take the brunt of digging side-loads and need routine shimming or replacement to stop the boom racking. Power-shuttle clutch packs and the torque converter wear with heavy forward/reverse shuttling, showing up as slipping or delayed engagement. On the 3054B/3054C, injector and lift-pump faults cause hard starting or rough idle, and rear kingpin bushings wear from constant axle oscillation.
Overhaul & Rebuild Points
Past the 6,000-hour coolant change, budget for a 3054B/3054C top-end or in-frame overhaul - liners, pistons, and head work restore compression lost to years of naturally aspirated running. The power-shuttle transmission and torque converter are the next wear point; clutch packs and converter seals are a common rebuild once shift quality drops off. Rebuild the backhoe swing frame and kingpin bushings when boom play develops; pair hydraulic pump and cylinder rebuilds, since a worn LSPC pump accelerates seal wear. Final drives outlast the engine before needing gear or bearing work.
Seasonal & Environment Servicing
Before winter, mix coolant for the lowest expected temperature and consider a block heater; the naturally aspirated 3054B/3054C has no turbo to aid cold starts, so keep glow-plug or ether-start systems in good order. Switch to lower-viscosity hydraulic oil for cold-month work, since the closed-center LSPC pump is sensitive to cold, thick oil at startup. On dusty jobs, clean the radiator and oil cooler cores more often than standard, and blow out cab air filters. Wash undercarriage areas before wet-season storage to keep mud out of kingpin and final-drive seals.
424D common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 131-1812 | Filter Element As-Fuel | Fuel system service | Check fitment → |
| 110-6326 | Filter Element As-Air | Air intake service | Check fitment → |
| 110-6331 | Filter Element As-Air | Air intake service | Check fitment → |
| 126-1817 | Filter-Oil | Hydraulic service | Check fitment → |
| 7W-2326 | Filter As-Engine Oil | Lubrication service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
424D fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| Engine Oil Pressure warning lamp (red, oil-drop/circle symbol) | Engine oil pressure has dropped below the safe minimum for current rpm. | Low oil level, clogged oil pickup or filter, worn oil pump, or a failed pressure sender/switch. | Idle down and stop immediately. Check oil level and top off. If the lamp stays on with correct oil level, check the sender and wiring before running the engine further. |
| Coolant Temperature warning lamp (thermometer-in-liquid symbol, red) | Engine coolant temperature has gone above the normal operating range. | Low coolant level, clogged radiator core or screen, slipping or failed fan drive, thermostat stuck closed, or a faulty coolant temperature sender. | Let the engine idle; do not shut down hot. Let it cool before checking coolant level. Clean the radiator and check the fan drive belt. Replace the sender if the gauge disagrees with actual coolant temperature. |
| Hydraulic Oil Temperature warning lamp (thermometer symbol, oil-pan icon) | Hydraulic tank oil temperature has gone above the normal operating range. | Low hydraulic oil level, clogged oil cooler fins, a relief valve stuck open causing continuous bypass heating, or extended high-load work in hot ambient conditions. | Reduce hydraulic workload and let the machine idle to cool. Check hydraulic oil level and clean the cooler core. Have relief and bypass valve settings checked if overheating repeats at normal ambient temperatures. |
| Alternator / Charging System warning lamp (battery symbol) | Charging system voltage is below normal; the battery is not being charged. | Worn or slipping alternator belt, loose or corroded battery/alternator wiring, or a failed alternator. | Check belt tension and condition first. Check battery terminal and alternator wiring for corrosion. Test alternator output and replace it if it will not charge within spec. |
| Power Train Oil Filter Bypass warning lamp | The transmission (power train) oil filter has gone into bypass, so oil is bypassing a restricted filter element unfiltered. | Overdue or clogged transmission filter, or cold, high-viscosity oil briefly tripping the bypass switch at startup. | If the lamp clears once the transmission warms up, no action is needed. If it stays on at operating temperature, replace the power train filter and check transmission oil condition. |
| Transmission Auto/Manual shift-mode lamp flashing | The transmission control has detected a mismatch between the selected shift mode/gear and the gear actually engaged. | A shift solenoid or coil not energizing correctly, a faulty speed-sensor input, or the operator toggling between auto and manual mode under conditions that do not match. | Cycle the auto/manual rocker switch to reset. If the mismatch persists, check shift solenoid wiring and connectors at the transmission before further diagnosis with the transmission control module. |
| No-crank / neutral-start interlock fault | The starter will not engage on key-turn because the control circuit does not see the direction/shift lever in a safe neutral position. | A faulty or misaligned neutral-start/directional lever position switch on the steering column, moisture-damaged switch contacts, or a broken wire in the column harness. | Confirm the direction lever is fully in neutral. Inspect and clean the column-mounted position switch and harness connector; repair or replace the switch if it fails to signal neutral correctly. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
424D attachments & work tools
Loader buckets
General-purpose loader bucket is standard, about 0.96 m3 (1.26 yd3) capacity on a bucket roughly 2.3 m (89-90 in) wide. A multi-purpose 4-in-1 clamshell bucket near 1.0 m3 (1.3 yd3) is offered for this size class, adding grab, backfill, dozing and grading in one tool.
Backhoe (rear) buckets
Rear digging buckets for this class span roughly 0.12-0.3 m3, from narrow trenching profiles to wider general-purpose buckets. Standard-stick dig depth is about 4.86 m, with bucket dig force near 52 kN (11,720 lb).
Extendable dipperstick
An optional telescoping dipperstick (E-stick) extends reach and digging depth beyond the standard arm, pushing depth to about 5.89 m so crews can dig deeper without repositioning. Dig force with the stick extended drops slightly, to roughly 51.6 kN (11,610 lb).
Backhoe swing-frame configuration
This machine is built in both center-pivot and side-shift backhoe configurations. Center-pivot gives a wider stabilizer footprint for greater lift capacity; side-shift slides the boom on a frame for extended side-to-side reach without moving the machine. Configuration is set at build, not field-convertible.
Hydraulic hammer / breaker
A compact-class hydraulic hammer sized for backhoe loaders in this weight range mounts on the dipperstick in place of the bucket, with tool operating weight around 344 kg (758 lb) and roughly 1150 J impact class. It runs off dedicated one-way auxiliary hydraulic flow at the stick.
Auxiliary hydraulics / combo lines
Rear auxiliary (combo) hydraulic lines with a cab-mounted flow-direction switch let the operator select one-way flow for a hammer or two-way flow for grapples, thumbs and other bidirectional tools. This kit is a prerequisite for running any powered rear tool beyond the standard bucket.
Coupler / mounting
Buckets pin on directly as the base mounting method at the dipperstick and loader arm. A hydraulic pin-grabber quick coupler, switch-operated from the cab, is available as an option to drop and pick up backhoe buckets and hammers without leaving the seat.
Forks and material handling
Pallet forks mount to the loader arm for shifting palletized material using the same linkage as the loader bucket. Rated loader lift capacity at full height is around 4.2 t (9,262 lb), setting the class's material-handling ceiling.
Broom and site-prep tools
A front-mounted broom/sweeper is offered for this class for street cleaning and site prep, driven off the loader's auxiliary hydraulics. Snow blades and pushers are also common front-end options for machines in this size range.
Cab guarding
The cab is built to ROPS/FOPS standard as delivered, with opening side and door glass and a large rear window. For hammer or light-demolition work, bolt-on screen guards over door and rear glass are commonly fitted to shield the operator from flying debris.
All 424D assemblies by section
Every catalogued assembly group for the Caterpillar 424D. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
130-1470 Air Cleaner Gp
| 11***89 | Air Cleaner Group | 1 |
| 13***70 | Air Cleaner Group | 1 |
| 7M***30 | Rivet-Pop | 3 |
197-3264 Air Cleaner Gp
| 14***82 | Air Cleaner Group | 1 |
| 19***64 | Air Cleaner Group | 1 |
| 8T***89 | Bolt (20mm Long) 0 Degrees); (L=20mm) {For 5br, 6cr} | 4 |
145-5882 Air Cleaner Gp
| 11***89 | Air Cleaner Group | 1 |
| 12***38 | Duct | 1 |
| 14***82 | Air Cleaner Group | 1 |
112-9689 Air Cleaner Gp
| 11***26 | Filter Element As-Air; (Primary) | 1 |
| 11***31 | Filter Element As-Air; (Secondary) | 1 |
| 11***89 | Air Cleaner Group | 1 |
197-3263 Air Cleaner Gp
| 13***70 | Air Cleaner Group | 1 |
| 19***63 | Air Cleaner Group | 1 |
| 8T***89 | Bolt (20mm Long) 0 Degrees); (L=20mm) {For 5br, 6cr} | 4 |
153-4953 Elbow Gp-Air Inlet
| 12***15 | Bolt; (M8x16x1.25-mm) | 3 |
| 15***53 | Elbow Group-Air Inlet | 1 |
| 6I***60 | Bolt; (M8x1.25x25-mm) | 1 |
184-7900 Indicator Gp-Air Filter Change
| 11***23 | Fitting | 1 |
| 12***75 | Connector-Filter | 2 |
| 18***00 | Indicator Group-Air Filter Change; -Manual | 1 |
189-5639 Lines Gp-Air
| 18***39 | Lines Group-Air | 1 |
| 18***40 | Elbow-Exhaust | 1 |
| 18***41 | Hose; (Manifold Inlet) | 1 |
185-8005 Manifold Gp-Exhaust
| 14***40 | Nut | 12 |
| 14***96 | Stud | 12 |
| 18***05 | Manifold Group-Exhaust | 1 |
197-9435 Manifold Gp-Inlet
| 10***05 | Bolt; (M8x1.25x90-mm) | 2 |
| 11***79 | Gasket | 2 |
| 15***64 | Bolt | 8 |
253-4390 Muffler & Converter
| 11***89 | Muffler As | 1 |
| 11***14 | Bracket As | 1 |
| 13***60 | Spacer; (11x19x10-mm Thk) | 1 |
7e-4642 Muffler Gp
| 09***47 | Nut-Thin; (M16x2 Thd) | 2 |
| 11***25 | Screw-Flat Head; (M6x1x25-mm) | 4 |
| 13***47 | Spring | 1 |
Basic Engine
185-3195 Camshaft Gp
| 06***79 | Dowel | 1 |
| 06***99 | Bushing-Idler Gear | 2 |
| 13***11 | Washer | 1 |
185-4617 Camshaft Gp
| 06***78 | Washer | 1 |
| 06***79 | Dowel | 1 |
| 06***99 | Bushing-Idler Gear | 2 |
141-6149 Cover Gp-Accessory Drive
| 06***10 | Washer | 1 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 11***22 | Bolt; (M8x16-mm) | 5 |
207-7954 Cover Gp-Valve Mechanism
| 10***75 | Seal | 3 |
| 11***05 | Seal-O-Ring | 1 |
| 16***65 | Spring; (Crankcase Breather Hose) | 1 |
185-4599 Crankshaft Gp
| 03***90 | Washer-Thrust; (Standard-Upper)(Upper) | 2 |
| 03***91 | Washer-Thrust; (Standard-Lower)(Lower) | 2 |
| 03***79 | Bearing Kit-Crankshaft (Main) .25mm (.01in) | 1 |
185-3190 Crankshaft Gp
| 03***90 | Washer-Thrust; (Standard-Upper)(Upper) | 2 |
| 03***91 | Washer-Thrust; (Standard-Lower)(Lower) | 2 |
| 03***79 | Bearing Kit-Crankshaft (Main) .25mm (.01in) | 1 |
207-1754 Cylinder Block Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 10 |
250-0414 Cylinder Block Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 10 |
185-4594 Cylinder Block Gp
| 18***94 | Cylinder Block Group | 1 |
| 20***54 | Cylinder Block Group | 1 |
| 20***18 | Housing As | 1 |
185-3189 Cylinder Block Gp
| 11***40 | Housing As | 1 |
| 12***31 | Bolt | 2 |
| 17***84 | Gasket | 1 |
176-1360 Cylinder Block Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 10 |
176-3133 Cylinder Head Gp
| 06***43 | Plug-Side-(1.251 Dia.) | 1 |
| 06***44 | Plug-Cylinder Head (Top Face) | 1 |
| 06***45 | Washer-(640mm Id, .064 Thk.) | 1 |
185-4603 Cylinder Head Gp
| 17***33 | Cylinder Head Group | 1 |
| 18***84 | Dowel | 2 |
| 18***85 | Gasket-Head | 1 |
185-3192 Cylinder Head Gp
| 17***33 | Cylinder Head Group | 1 |
| 18***84 | Dowel | 2 |
| 18***85 | Gasket-Head | 1 |
148-9679 Drive Gp-Fan
| 10***87 | Bolt; (M10x1.5x85-mm) | 4 |
| 13***38 | Housing As | 1 |
| 14***79 | Drive Group-Fan | 1 |
130-1422 Flywheel Gp
| 03***87 | Ring-Starting Motor; (126-Teeth) | 1 |
| 0S***03 | Bolt,Machine Fuel Pump Drive Gear Mounting | 6 |
| 13***22 | Flywheel Group | 1 |
130-6352 Housing Gp-Flywheel
| 10***17 | Plug | 3 |
| 11***63 | Bolt; (M8x1.25x12-mm) | 2 |
| 12***83 | Bolt; (M10x1.5x30-mm) | 6 |
185-4611 Housing Gp-Front
| 17***91 | Gasket-Cover | 1 |
| 18***11 | Housing Group-Front | 1 |
| 21***14 | Damper | 1 |
185-3194 Housing Gp-Front
| 14***44 | Shield | 1 |
| 14***45 | Damper | 1 |
| 17***91 | Gasket-Cover | 1 |
148-9685 Lifting Gp-Engine
| 12***00 | Spacer | 2 |
| 14***49 | Plate-Lifting | 1 |
| 14***90 | Plate | 1 |
7e-4644 Mounting Gp-Alternator
| 11***64 | Bracket As | 1 |
| 11***65 | Bracket As | 1 |
| 11***66 | Strap | 1 |
130-1427 Mounting Gp-Alternator
| 10***02 | Bracket | 1 |
| 13***27 | Mounting Group-Alternator | 1 |
| 6I***54 | Bolt; (M8x1.25x30-mm) | 2 |
195-2130 Mounting Gp-Engine
| 10***87 | Plug | 6 |
| 13***70 | Plug | 4 |
| 19***30 | Mounting Group-Engine | 1 |
143-0782 Mounting Gp-Engine & Xmsn
| 11***94 | Support-Front-Lh | 1 |
| 11***95 | Support-Front-Rh | 1 |
| 11***21 | Support As; (Rh) | 1 |
143-0788 Mounting Gp-Engine & Xmsn -Power Shift
| 14***88 | Mounting Group-Engine & Xmsn; -Power Shift | 1 |
| 3E***92 | Washer; (16.75x100x6-mm Thk) | 4 |
| 3E***24 | Mounting As | 2 |
130-4654 Mounting Gp-Starting Motor
| 13***54 | Mounting Group-Starting Motor | 1 |
| 6I***64 | Stud; (M10x1.5x30-mm) | 3 |
140-8175 Pan Gp-Oil
| 03***46 | Gasket | 1 |
| 06***13 | Gasket | 1 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 13 |
168-0289 Pan Gp-Oil
| 03***46 | Gasket | 1 |
| 06***13 | Gasket | 1 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 13 |
185-4602 Piston & Rod Gp
| 06***83 | Bolt-Rod Cap | 2 |
| 12***36 | Ring-Retaining | 2 |
| 13***48 | Bushing | 1 |
185-3191 Piston & Rod Gp
| 06***83 | Bolt-Rod Cap | 2 |
| 12***36 | Ring-Retaining | 2 |
| 13***48 | Bushing | 1 |
130-4648 Plug Gp-Cylinder Block
| 06***24 | Plug | 2 |
| 13***48 | Plug Group-Cylinder Block | 1 |
130-4647 Plug Gp-Cylinder Head
| 06***44 | Plug-Cylinder Head (Top Face) | 1 |
| 06***45 | Washer-(640mm Id, .064 Thk.) | 1 |
| 13***47 | Plug Group-Cylinder Head | 1 |
186-0871 Plug Gp-Engine
| 06***10 | Washer | 1 |
| 18***71 | Plug Group-Engine | 1 |
| 2B***58 | Plug--To Block Upper Front Air Manifold | 1 |
141-0728 Plug Gp-Engine
| 14***28 | Plug Group-Engine | 1 |
| 2B***58 | Plug--To Block Upper Front Air Manifold | 2 |
6i-0500 Pulley Gp-Crankshaft
| 6I***00 | Pulley Group-Crankshaft | 1 |
| 6I***01 | Block | 1 |
| 6I***02 | Pulley | 1 |
185-4605 Valve Mechanism Gp
| 00***06 | Ring-Retaining | 2 |
| 06***83 | Plug-Shaft End | 2 |
| 06***87 | Spring-Shaft | 2 |
185-3193 Valve Mechanism Gp
| 00***06 | Ring-Retaining | 2 |
| 06***83 | Plug-Shaft End | 2 |
| 06***87 | Spring-Shaft | 2 |
Braking System
129-0138 Brake Gp-Parking
| 12***38 | Brake Group-Parking | 1 |
| 16***53 | Lever Group-Hand Control; -Parking Brake | 1 |
| 16***55 | Cable Group | 1 |
163-0754 Control Gp-Parking Brake
| 12***38 | Brake Group-Parking | 1 |
| 15***16 | Switch As; (Parking Brake Alarm) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
184-6570 Control Gp-Parking Brake
| 10***34 | Switch As-Limit; (Service Brake) | 2 |
| 11***49 | Tube As | 1 |
| 14***25 | Connector As. | 2 |
165-6918 Control Gp-Service Brake
| 10***34 | Switch As-Limit; (Service Brake) | 2 |
| 11***49 | Tube As | 1 |
| 14***25 | Connector As. | 2 |
163-0753 Lever Gp-Hand Control
| 15***07 | Kit-Brake Reservoir | 1 |
| 16***53 | Lever Group-Hand Control; -Parking Brake | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
4e-8619 Reservoir Gp-Brake
| 00***20 | Washer-Thrust; (35x63.5x3.14-mm Thk) | 2 |
| 11***29 | Pin | 1 |
| 12***25 | Spindle As-Rh | 1 |
Cooling System
146-0001 Connection Gp-Water
| 14***15 | Seal-O-Ring; (Water Temperature Regulator) | 1 |
| 14***88 | Seal; (Housing, Regulator)(Temperature Regulator Housing) | 1 |
| 14***01 | Connection Group-Water | 1 |
197-9405 Cooler Gp-Fltr Base & Eng Oil
| 03***62 | Plug | 1 |
| 10***13 | Adapter | 1 |
| 10***73 | Bolt; (M10x1.5x60-mm) | 2 |
185-7602 Cooling Ar
| 12***37 | Lamp; (12-Volt) | 1 |
| 13***24 | Seal | 1 |
| 14***13 | Fan Group-Suction | 1 |
185-7604 Cooling Ar-High Ambient Temp
| 12***37 | Lamp; (12-Volt) | 1 |
| 13***24 | Seal | 1 |
| 14***57 | Radiator & Hydraulic Oil Cooler Group | 1 |
202-5775 Cooling Ar-High Ambient Temp -Autoshift
| 14***57 | Radiator & Hydraulic Oil Cooler Group | 1 |
| 14***60 | Fan Group-Suction; -High Ambient | 1 |
| 1N***43 | "V" Belt | 1 |
145-6713 Fan Gp-Suction
| 13***80 | Pulley-Fan Drive | 1 |
| 14***88 | Spacer-Fan | 1 |
| 14***91 | Spider As; (9-Blade) | 1 |
147-1560 Fan Gp-Suction -High Ambient
| 13***79 | Pulley-Fan Drive | 1 |
| 13***81 | Pulley-Fan | 1 |
| 14***88 | Spacer-Fan | 1 |
198-9723 Fitting Gp-Heater & Air Cond
| 00***57 | Bushing-Reducing | 1 |
| 00***10 | Elbow | 1 |
| 19***23 | Fitting Group-Heater & Air Cond | 1 |
143-0789 Lines Gp-Power Train Cooler -Power Shift
| 03***87 | Elbow-Axle Suction Port | 1 |
| 03***83 | Nipple-Front Axle Suction Port | 1 |
| 11***86 | Bracket As | 1 |
143-0786 Lines Gp-Power Train Cooler
| 11***86 | Bracket As | 1 |
| 13***84 | Clip | 2 |
| 13***04 | Hose As | 1 |
139-2614 Pump Gp-Water
| 10***51 | Bolt; (M8x1.25x65-mm) | 2 |
| 10***71 | Bolt | 1 |
| 10***05 | Bolt; (M8x1.25x90-mm) | 3 |
147-1558 Radiator & Hyd Oil Cooler Gp
| 00***65 | Cap-Radiator; (7 Psi) | 1 |
| 12***65 | Rivet-Pop | 16 |
| 14***58 | Plug As | 1 |
147-1557 Radiator & Hyd Oil Cooler Gp
| 14***37 | Hose-Radiator; (Upper) | 1 |
| 14***38 | Hose-Radiator; (Lower) | 1 |
| 14***40 | Plate | 2 |
154-3799 Radiator & Hyd Oil Cooler Gp
| 12***65 | Rivet-Pop | 6 |
| 14***12 | Baffle | 1 |
| 14***58 | Orifice; Not Illustrated, Orifice, Radiator & Hydraulic Oil Cooler Group | 1 |
Electrical And Starting System
3e-7585 Lamp Gp-Head & Signal
| 10***46 | Lamp; (12-Volt, 4-Watt)(Miniature) | 2 |
| 10***48 | Lens As; (Headlight)(High, Low Beam) | 1 |
| 10***50 | Lens; (Amber)(Turn Signal) | 1 |
3e-7584 Lamp Gp-Head & Signal
| 10***46 | Lamp; (12-Volt, 4-Watt)(Miniature) | 1 |
| 10***47 | Body As-Lamp | 1 |
| 10***49 | Lens As; (Headlight) | 1 |
121-5832 Alternator Gp-Charging
| 10***12 | Alternator Group-Charging*R | 1 |
| 12***32 | Alternator Group-Charging | 1 |
| 4N***97 | V-Belt Set; (Includes 2-Belts)(Alternator) | 1 |
137-3507 Alternator Gp-Charging
| 03***17 | Tread-Nonskid | 2 |
| 13***93 | Cable As-Battery; (Negative) | 1 |
| 13***07 | Alternator Group-Charging | 1 |
121-5830 Alternator Gp-Charging
| 10***13 | Alternator Group-Charging | 1 |
| 12***30 | Alternator Group-Charging | 1 |
| 7W***96 | V-Belt Set; (Includes 2-Belts)(Includes 2 Belts) | 1 |
121-5831 Alternator Gp-Charging
| 10***13 | Alternator Group-Charging | 1 |
| 12***31 | Alternator Group-Charging | 1 |
| 4N***97 | V-Belt Set; (Includes 2-Belts)(Alternator) | 1 |
105-2813 Alternator Gp-Charging
| 10***12 | Alternator Group-Charging*R | 1 |
| 10***13 | Alternator Group-Charging | 1 |
| 2P***91 | V-Belt; (A/C Compressor) | 1 |
105-2812 Alternator Gp-Charging
| 10***12 | Alternator Group-Charging*R | 1 |
| 11***57 | Pulley-Alternator | 1 |
| 11***59 | Frame As-Alternator | 1 |
122-5865 Battery Gp
| 11***21 | Cover As | 1 |
| 12***65 | Battery Group | 1 |
119-8016 Battery Gp -Heavy Duty
| 03***17 | Tread-Nonskid | 1 |
| 11***16 | Battery Group; -Heavy Duty | 1 |
| 13***92 | Cable As-Battery; (Negative)(Battery) | 1 |
125-2632 Cover Gp-Switch
| 12***32 | Cover Group-Switch | 1 |
| 13***65 | Receptacle As | 1 |
| 16***50 | Cord As; (Jacket Water Heater) | 1 |
166-0658 Heater Gp-Jacket Water
| 16***99 | Element As-Jacket Water Heater; (240-Volt, 1250-Watt) | 1 |
| 16***00 | Kit-Seal | 1 |
| 16***74 | Cord As; (Jacket Water Heater) | 1 |
166-0659 Heater Gp-Jacket Water
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***15 | Relay As; (12-Volt)(Junction Box) | 1 |
| 12***78 | Locknut; (M6x1-Thd) | 1 |
186-0310 Installation Gp-Security
| 10***46 | Lamp; (12-Volt, 4-Watt)(Miniature) | 1 |
| 10***47 | Body As-Lamp | 1 |
| 10***48 | Lens As; (Headlight)(High, Low Beam) | 1 |
104-5255 Lamp Gp-Head & Signal -Lh
| 10***55 | Lamp Group-Head & Signal; -Lh | 1 |
| 19***12 | Lamp; (12-Volt, 10-Watt) | 1 |
| 5C***74 | Nut (M5x.8 Thd); (M5x0.8-Thd) | 2 |
3e-9382 Lamp Gp-Head & Signal -Rh
| 10***46 | Lamp; (12-Volt, 4-Watt)(Miniature) | 2 |
| 10***48 | Lens As; (Headlight)(High, Low Beam) | 1 |
| 10***50 | Lens; (Amber)(Turn Signal) | 1 |
101-4448 Lamp Gp-Registration Plate
| 09***92 | Lamp Group-Stop & Tail | 1 |
| 10***48 | Lamp Group-Registration Plate, Name-Plate | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
092-2992 Lamp Gp-Stop & Tail
| 09***92 | Lamp Group-Stop & Tail | 1 |
| 17***34 | Plug As; (Warning Beacon) | 1 |
| 18***15 | Lamp Group-Warning Beacon; (Fixed) | 1 |
9r-2385 Lamp Gp-Stop & Tail
| 09***79 | Lens; (Stop/Turn Signal) | 1 |
| 3C***81 | Nut | 4 |
| 3C***82 | Screw | 4 |
180-3663 Lamp Gp-Warning Beacon -Fixed
| 17***34 | Plug As; (Warning Beacon) | 1 |
| 18***63 | Lamp Group-Warning Beacon; -Fixed Mount | 1 |
| 18***16 | Lamp Group-Warning Beacon; -Magnetic Mount | 1 |
180-3664 Lamp Gp-Warning Beacon -Amber, Magnetic Mount, Rotating
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***69 | Lamp Group-Flood; (Front) | 2 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
185-8815 Lighting Gp-Flood
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
185-8814 Lighting Gp-Flood
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***69 | Lamp Group-Flood; (Front) | 4 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
186-0315 Lighting Gp-Roading -Rh-Dip Beam
| 10***55 | Lamp Group-Head & Signal; -Lh | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 15***63 | Wedge-Plug Lock; (6-Pin) | 2 |
185-8811 Lighting Gp-Roading -Fog Light
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 15***63 | Wedge-Plug Lock; (6-Pin) | 2 |
| 15***74 | Kit-Connecting Plug; (6-Pin)(Cat Electronic Display Harness) | 2 |
186-0314 Lighting Gp-Roading -Lh-Dip Beam
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 15***63 | Wedge-Plug Lock; (6-Pin) | 2 |
| 15***74 | Kit-Connecting Plug; (6-Pin)(Cat Electronic Display Harness) | 2 |
191-6550 Lighting Gp-Roading -Lh Dip Beam-Side Shift-Canopy
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 13***15 | Bracket; (Rh) | 1 |
| 13***16 | Bracket; (Rh) | 1 |
191-6551 Lighting Gp-Roading -Rh Dip Beam-Side Shift-Canopy
| 11***16 | Bracket As-Rh | 1 |
| 12***50 | Bracket As-Lh | 1 |
| 18***63 | Lamp Group-Warning Beacon; -Fixed Mount | 2 |
186-0316 Lighting Gp-Roading -Side Repeater
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 13***15 | Bracket; (Rh) | 1 |
| 13***16 | Bracket; (Rh) | 1 |
186-2737 Lighting Gp-Warning
| 10***04 | Plate | 1 |
| 13***42 | Screw-Self-Tapping; (M5x2.3x18.8-mm) | 3 |
| 18***64 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
104-9502 Lighting Gp-Warning Beacon
| 10***02 | Lighting Group-Warning Beacon | 1 |
| 11***16 | Bracket As-Rh | 1 |
| 13***11 | Screw; (M6x1x35-mm)(M6x1.0x20mm) | 3 |
141-8292 Lighting Gp-Warning Beacon -Fixed Mount
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 2 |
| 14***92 | Lighting Group-Warning Beacon; -Fixed Mount | 1 |
189-5746 Sensor Gp-Speed -Transmission
| 18***72 | Heater; (Air Inlet) | 1 |
| 18***46 | Sensor Group-Speed; -Low Output-Engine Timing-Transmission | 1 |
186-4273 Starting Aid Gp
| 06***98 | Nut; (3/8-24-Thd) | 1 |
| 06***99 | Ferrule | 1 |
| 10***86 | Clip | 1 |
197-9245 Starting Aid Gp
| 14***39 | Starting Motor Group-Electric; -12-Volt | 1 |
| 19***45 | Starting Aid Group | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 3 |
112-1767 Starting Motor Gp-Electric
| 10***85 | Cap-Starting Motor | 1 |
| 10***12 | Kit-Contact; (Starting Motor) | 1 |
| 10***13 | Switch As; (Starting Motor)(12-Volt) | 1 |
143-0539 Starting Motor Gp-Electric -12-Volt
| 03***63 | Plug | 1 |
| 14***39 | Starting Motor Group-Electric; -12-Volt | 1 |
| 7W***38 | Switch As-Pressure; (Engine Oil) | 1 |
197-9401 Switch Gp-Pressure
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***27 | Screw-Machine; (M6x1x30-mm) | 1 |
| 15***28 | Alarm As; (Backup) | 1 |
193-2343 Warning Gp-Backup
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
186-2730 Wiring Gp-Air Conditioner
| 12***37 | Lamp; (12-Volt) | 1 |
| 13***24 | Seal | 1 |
| 18***30 | Wiring Group-Air Conditioner | 1 |
202-6107 Wiring Gp-Air Conditioner
| 09***56 | Screw-Machine; (M5x0.8x16-mm) | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
185-8809 Wiring Gp-Autoshift
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***98 | Bolt-Socket Head; (M5x0.8x12-mm) | 3 |
| 13***94 | Switch As-Rocker; (Turn Signal)(Turn Signal) | 1 |
194-1950 Wiring Gp-Cab
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***91 | Anchor | 1 |
| 13***89 | Clip; (Ladder) | 3 |
186-0306 Wiring Gp-Cab
| 10***04 | Suppressor As-Arc | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***90 | Fuse; (10 Amp) | 1 |
185-8802 Wiring Gp-Cab -Turn Signal
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***92 | Fuse; (20 Amp) | 2 |
186-0303 Wiring Gp-Cab
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***91 | Fuse; (15-Ampere) | 1 |
| 14***39 | Relay As | 1 |
169-0623 Wiring Gp-Console
| 09***41 | Screw; (Machine) (M6x1thd) | 2 |
| 09***92 | Locknut; (M6x1-Thd) | 2 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
186-0309 Wiring Gp-Console -All Wheel Drive
| 10***20 | Plug As-Connector; (2-Pin) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***32 | Cover | 1 |
169-0625 Wiring Gp-Console
| 10***04 | Suppressor As-Arc | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***59 | Fuse; (5-Ampere) | 1 |
185-8803 Wiring Gp-Engine
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 0 |
186-2731 Wiring Gp-Heater
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 0 |
| 10***05 | Harness As-Wiring; (Kickout, Positioner)(Sensor) | 1 |
| 11***90 | Bracket As | 1 |
122-1645 Wiring Gp-Kickout & Positioner
| 09***33 | Screw-Machine; (M4x0.7x40-mm) | 8 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
185-8800 Wiring Gp-Platform
| 18***81 | Harness As-Platform; (Service Connector) | 1 |
| 18***00 | Wiring Group-Platform | 1 |
| 22***93 | Bolt-Socket Head; (M3x0.5-Thd) | 4 |
186-0304 Wiring Gp-Platform -Service
| 11***90 | Fuse; (10 Amp) | 1 |
| 17***39 | Receptacle As; (Power Supply) | 1 |
| 18***04 | Wiring Group-Platform; -Service | 1 |
190-7557 Wiring Gp-Power Receptacle
| 09***15 | Lockwasher | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 4 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
185-8807 Wiring Gp-Rear
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
194-1947 Wiring Gp-Ride Control
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Suppressor As-Arc | 2 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
194-1949 Wiring Gp-Ride Control -French
| 13***85 | Alarm-Warning; (Stabilizer) | 1 |
| 17***00 | Suppressor-Arc | 1 |
| 18***20 | Harness As-Alarm; (Stabilizer) | 1 |
186-0312 Wiring Gp-Ride Control -Autoshift
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Suppressor As-Arc | 2 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
186-0305 Wiring Gp-Ride Control
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
186-0311 Wiring Gp-Ride Control
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Suppressor As-Arc | 2 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
186-0307 Wiring Gp-Stabilizer Alarm
| 15***57 | Axle Group-Rear | 1 |
| 18***07 | Wiring Group-Stabilizer Alarm; -Warning | 1 |
| 5F***34 | Valve As-Vent; (Governor Air Compressor) | 1 |
Engine Arrangement
186-0598 Engine Ar
| 18***03 | Wiring Group-Engine | 1 |
| 18***98 | Engine Ar | 1 |
| 18***39 | Lines Group-Air | 1 |
204-5371 Engine Ar-Primary
| 13***22 | Flywheel Group | 1 |
| 13***27 | Mounting Group-Alternator | 1 |
| 13***46 | Fitting Group-Fuel Lines | 1 |
187-8016 Engine Ar-Primary
| 13***22 | Flywheel Group | 1 |
| 13***27 | Mounting Group-Alternator | 1 |
| 13***46 | Fitting Group-Fuel Lines | 1 |
185-1887 Installation Ar-Engine
| 11***67 | Starting Motor Group-Electric | 1 |
| 12***69 | Gauge Group-Oil Level & Filler; -With Filter | 1 |
| 18***87 | Installation Ar-Engine | 1 |
Frame And Body
188-0860 Box Gp-Battery
| 11***95 | Bumper As | 1 |
| 18***60 | Box Group-Battery | 1 |
| 7X***72 | Washer-Hard; (24x44.5x6-mm Thk) | 4 |
112-1809 Bumper Gp-Front
| 11***09 | Bumper Group-Front | 1 |
| 11***17 | Counterweight; (145-Kg (319-Lb)) | 1 |
| 8C***78 | Bolt-Plt; (M20 X 2.5 X 140) | 4 |
120-8482 Counterweight Gp
| 12***82 | Counterweight Group | 1 |
| 12***72 | Seal; (135-cm) | 0 |
| 19***35 | Plate | 1 |
106-5881 Counterweight Gp
| 10***81 | Counterweight Group | 1 |
| 11***17 | Counterweight; (145-Kg (319-Lb)) | 1 |
| 11***18 | Counterweight; (104-Kg (229-Lb)) | 1 |
106-5880 Counterweight Gp
| 10***80 | Counterweight Group | 1 |
| 11***17 | Counterweight; (145-Kg (319-Lb)) | 1 |
| 11***18 | Counterweight; (104-Kg (229-Lb)) | 3 |
106-5878 Counterweight Gp
| 10***78 | Counterweight Group | 1 |
| 11***17 | Counterweight; (145-Kg (319-Lb)) | 1 |
| 11***18 | Counterweight; (104-Kg (229-Lb)) | 1 |
106-5879 Counterweight Gp
| 10***79 | Counterweight Group | 1 |
| 11***17 | Counterweight; (145-Kg (319-Lb)) | 1 |
| 11***18 | Counterweight; (104-Kg (229-Lb)) | 2 |
132-5981 Cover Gp-Hood
| 12***41 | Latch As-T-Bar | 1 |
| 13***81 | Cover Group-Hood | 1 |
| 15***63 | Door As | 1 |
118-6842 Door Gp-Battery
| 11***42 | Door Group-Battery | 1 |
| 16***98 | Fender As; (Lh) | 1 |
| 16***99 | Fender As; (Rh) | 1 |
162-3996 Fender Gp-Front
| 15***83 | Washer-Hard; (8.4x35x2.5-mm Thk) | 14 |
| 16***96 | Fender Group-Front | 1 |
| 16***85 | Fender-Rh | 1 |
164-1149 Fender Gp-Rear
| 15***83 | Washer-Hard; (8.4x35x2.5-mm Thk) | 14 |
| 16***49 | Fender Group-Rear | 1 |
| 16***85 | Fender-Rh | 1 |
195-3899 Fender Gp-Rear
| 11***90 | Mount As | 2 |
| 16***02 | Plate As | 1 |
| 16***03 | Plate | 1 |
201-9732 Floorplate Gp
| 12***01 | Plate-Retainer | 4 |
| 12***04 | Shim; (1-mm Thk)(1mm Thk) | 2 |
| 18***82 | Frame As | 1 |
185-0080 Floorplate Gp
| 18***80 | Floorplate Group | 1 |
| 20***33 | Cover | 1 |
| 9X***42 | Screw-Truss Head (M6x1.0x12mm); (M6x1.00x12mm) | 1 |
185-8838 Frame Gp-Loader
| 03***39 | Ring-Back-Up | 4 |
| 10***60 | Bearing-Sleeve | 1 |
| 11***99 | Bolt; (M24x3x80-mm) | 6 |
185-8836 Frame Gp-Loader
| 12***01 | Plate-Retainer | 4 |
| 12***04 | Shim; (1-mm Thk)(1mm Thk) | 4 |
| 18***99 | Frame As | 1 |
114-6408 Frame Gp-Sliding
| 10***15 | Bracket | 1 |
| 10***16 | Plate As | 1 |
| 10***20 | Pin As; (428b-438b) | 1 |
183-6058 Frame Gp-Swing
| 10***15 | Bracket | 1 |
| 10***16 | Plate As | 1 |
| 10***40 | Stop | 1 |
183-6059 Frame Gp-Swing
| 18***59 | Frame Group-Swing | 1 |
| 21***81 | Guard As | 1 |
| 8T***83 | Bolt (M12x1.75x40mm); (M12x1.75x40-mm) | 4 |
9r-1233 Guard Gp-Drive Shaft -All Wheel Drive-All Wheel Steer
| 10***16 | Cover-Work Light | 4 |
| 11***17 | Cover As-Front | 4 |
| 9R***33 | Guard Group-Drive Shaft; -All Wheel Drive-All Wheel Steer | 1 |
9r-9999 Guard Gp-Lines
| 18***77 | Guard | 1 |
| 18***78 | Guard | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 8 |
137-1821 Guard Gp-Lighting -Rear
| 13***21 | Guard Group-Lighting; -Rear | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 8 |
| 8T***37 | Bolt (M10x1.50x20mm) | 8 |
113-0020 Guard Gp-Lighting
| 11***20 | Guard Group-Lighting | 1 |
| 13***22 | Guard As-Rear | 2 |
| 5C***90 | Nut; (M6x1-Thd)(Air Inlet Heater) | 4 |
183-1276 Guard Gp-Lines -Narrow Frame
| 11***15 | Bumper As | 2 |
| 11***16 | Guard As | 1 |
| 12***28 | Bar | 2 |
185-8842 Hood & Guard Gp
| 11***61 | Spring As-Gas | 2 |
| 11***72 | Hinge As; (Lh)(Lh) | 2 |
| 11***73 | Hinge As; (Rh)(Rh) | 2 |
190-5124 Hood Gp-Engine
| 14***18 | Insulation-Rh | 1 |
| 14***19 | Insulation-Lh | 1 |
| 14***48 | Insulation-Rh | 1 |
145-0920 Liner Gp-Sound Suppression
| 10***48 | Lamp Group-Registration Plate, Name-Plate | 1 |
| 10***49 | Name-Plate, Harness As-Rear Lighting | 1 |
| 10***56 | Plate As-Number | 1 |
110-6017 Mounting Gp-Registration
| 11***17 | Mounting Group-Registration | 1 |
| 9R***04 | Reflector-Amber | 4 |
101-4447 Mounting Gp-Registration
| 10***47 | Mounting Group-Registration | 1 |
| 10***48 | Lamp Group-Registration Plate, Name-Plate | 1 |
| 10***49 | Name-Plate, Harness As-Rear Lighting | 1 |
152-0184 Reflector Gp -Side Shift
| 15***84 | Reflector Group; -Side Shift | 1 |
| 15***06 | Valve-Gas | 1 |
| 16***96 | Service Kit; (Includes Seals) | 1 |
Fuel System
164-1076 Control Gp-Governor
| 03***00 | Washer; (0.531x0.718x0.064-In Thk) | 1 |
| 03***49 | Plug | 1 |
| 06***69 | Olive-Fuel Tube | 2 |
197-9440 Filter & Lines Gp-Fuel
| 10***39 | Nut | 1 |
| 10***40 | Cap; (Fuel Filter) | 1 |
| 10***41 | Seal; (Plunger) | 1 |
138-3096 Filter Gp-Fuel
| 11***18 | Ring-Retaining | 1 |
| 11***19 | Nut | 1 |
| 12***80 | Kit-Water Base; (Water Separator) | 1 |
130-7092 Filter Gp-Water Sep & Fuel
| 06***68 | Nut-Fuel Line; (1/2-In) | 1 |
| 06***69 | Olive-Fuel Tube | 1 |
| 13***92 | Filter Group-Water Sep & Fuel | 1 |
130-4646 Fitting Gp-Fuel Lines
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 12***13 | Connection | 1 |
| 12***14 | Bolt | 3 |
197-9414 Pump Gp-Fuel Injection
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 4 |
| 14***13 | Clip | 2 |
7e-4636 Separator Gp-Water
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***46 | Tread | 1 |
| 12***50 | Screw-Pan Head; (M6x1x16-mm) | 5 |
190-1117 Tank & Mtg Gp-Fuel
| 10***20 | Gasket | 1 |
| 11***48 | Plate | 1 |
| 12***50 | Screw-Pan Head; (M6x1x16-mm) | 8 |
195-5656 Tank Gp-Fuel
| 11***63 | Pulley-Alternator | 1 |
| 11***65 | Frame As-Alternator | 1 |
| 11***66 | Rotor As-Alternator | 1 |
Hydraulic System
107-0624 Cylinder Gp-Lift
| 10***24 | Cylinder Group-Lift; Cylinder Gp-Lift | 1 |
| 16***92 | Seal As-Buffer | 1 |
| 16***02 | Seal-U-Cup | 1 |
206-3549 Cylinder Gp-Lift
| 16***86 | Seal As-Buffer | 1 |
| 16***94 | Seal-U-Cup | 1 |
| 1H***39 | Packing,Preformed Cover Part Of Kit P/N 4j***80 | 1 |
191-7843 Cylinder Gp-Lift
| 16***92 | Seal As-Buffer | 1 |
| 16***02 | Seal-U-Cup | 1 |
| 19***12 | Head | 1 |
9t-5455 Valve Gp-Load Control -Tilt
| 17***41 | Nut; (M8x6.5-mm) | 2 |
| 19***15 | Kit-Seal; (Pilot Valve) | 1 |
| 20***22 | Valve Group-Pilot; -Stabilizer, Lh | 1 |
162-3960 Accumulator Gp-Ride Control -Charged
| 16***60 | Accumulator Group-Ride Control; -Charged | 1 |
| 18***11 | Wiring Group-Ride Control | 1 |
| 19***84 | Lines Group-Ride Control | 1 |
200-7924 Control Ar-Ride
| 10***17 | Stud; (3/8-16-Thd) | 3 |
| 19***50 | Valve Group-Control; -Extendable Stick;Auxiliary | 1 |
| 20***24 | Name-Plate; (Stay Out), Control Ar-Ride | 1 |
194-3485 Control Ar-Ride -French
| 19***49 | Wiring Group-Ride Control; -French | 1 |
| 19***85 | Control Ar-Ride; -French | 1 |
| 19***84 | Lines Group-Ride Control | 1 |
185-1482 Control Ar-Ride
| 18***82 | Control Ar-Ride; -Standard Shift | 1 |
| 19***47 | Wiring Group-Ride Control | 1 |
| 19***84 | Lines Group-Ride Control | 1 |
194-3486 Control Ar-Ride -French
| 17***14 | Film; (Ride Control) | 2 |
| 18***05 | Wiring Group-Ride Control | 1 |
| 19***86 | Control Ar-Ride; -French | 1 |
194-3484 Control Ar-Ride -Standard Shift
| 18***05 | Wiring Group-Ride Control | 1 |
| 19***84 | Control Ar-Ride; -Standard Shift | 1 |
| 19***84 | Lines Group-Ride Control | 1 |
202-0965 Conversion Gp-Control Valve -Kit
| 16***00 | Control Group-Hydraulic Hand | 1 |
| 20***65 | Conversion Group-Control Valve; -Kit | 1 |
201-6902 Conversion Gp-Control Valve -Kit
| 11***28 | Stud | 3 |
| 19***50 | Valve Group-Control; -Extendable Stick;Auxiliary | 1 |
| 20***02 | Conversion Group-Control Valve; -5-Bank, 6-Bank Valve | 1 |
202-0964 Conversion Gp-Control Valve -Kit
| 19***50 | Valve Group-Control; -Extendable Stick;Auxiliary | 1 |
| 20***64 | Conversion Group-Control Valve; -Kit | 1 |
| 4J***67 | Packing,Preformed; Tube To Cylinder Uoc:Bsv,Bsx | 1 |
198-7412 Conversion Gp-Control Valve
| 11***16 | Stud; (3/8-16-2a Thd X 393.7mm) | 3 |
| 19***50 | Valve Group-Control; -Extendable Stick;Auxiliary | 1 |
| 19***12 | Conversion Group-Control Valve; -4-Bank, 5-Bank | 1 |
164-1430 Conversion Gp-Hyd Hand Control -Kit
| 10***51 | Washer; (36.7x66x6-mm Thk) | 1 |
| 16***30 | Conversion Group-Hydraulic Hand Control; -Kit | 1 |
| 16***01 | Seal As-Buffer | 1 |
164-1410 Conversion Gp-Hyd Hand Control -Kit
| 16***10 | Conversion Group-Hydraulic Hand Control; -Kit | 1 |
| 16***20 | Control Group-Hydraulic Hand | 1 |
206-0518 Cylinder Gp-Backhoe Bucket -Extendable Stick
| 12***77 | Head | 1 |
| 16***02 | Seal As-Buffer | 1 |
| 16***10 | Seal-U-Cup | 1 |
206-0514 Cylinder Gp-Backhoe Bucket
| 10***51 | Washer; (36.7x66x6-mm Thk) | 1 |
| 16***01 | Seal As-Buffer | 1 |
| 16***12 | Seal-U-Cup | 1 |
180-4849 Cylinder Gp-Backhoe Bucket
| 10***51 | Washer; (36.7x66x6-mm Thk) | 1 |
| 16***01 | Seal As-Buffer | 1 |
| 16***12 | Seal-U-Cup | 1 |
180-4239 Cylinder Gp-Backhoe Bucket
| 10***51 | Washer; (36.7x66x6-mm Thk) | 1 |
| 16***01 | Seal As-Buffer | 1 |
| 16***12 | Seal-U-Cup | 1 |
6e-0274 Cylinder Gp-Boom
| 16***02 | Seal As-Buffer | 1 |
| 16***10 | Seal-U-Cup | 1 |
| 17***66 | Bolt; (1 1/2-12x101.6-mm) | 1 |
191-7753 Cylinder Gp-Boom
| 16***02 | Seal As-Buffer | 1 |
| 16***10 | Seal-U-Cup | 1 |
| 17***66 | Bolt; (1 1/2-12x101.6-mm) | 1 |
206-3628 Cylinder Gp-Boom
| 16***51 | Lines Group-Extendable Stick | 1 |
| 16***74 | Cylinder Group-Extendable Stick | 1 |
| 19***25 | Cylinder Group-Extendable Stick | 1 |
191-7725 Cylinder Gp-Extendable Stick
| 16***92 | Seal As-Buffer | 1 |
| 16***02 | Seal-U-Cup | 1 |
| 16***55 | Seal-Wiper | 1 |
164-7174 Cylinder Gp-Extendable Stick
| 16***74 | Cylinder Group-Extendable Stick | 1 |
| 16***76 | Rod As | 1 |
| 16***86 | Seal As-Buffer | 1 |
155-6586 Cylinder Gp-Extendable Stick
| 15***86 | Cylinder Group-Extendable Stick | 1 |
| 16***75 | Cylinder As | 1 |
| 16***76 | Rod As | 1 |
185-1839 Cylinder Gp-Multipurpose Bukt
| 12***51 | Cylinder As | 1 |
| 12***53 | Rod As | 1 |
| 15***49 | Head | 1 |
173-4565 Cylinder Gp-Stabilizer
| 13***59 | Rod As | 1 |
| 16***01 | Seal As-Buffer | 1 |
| 16***12 | Seal-U-Cup | 1 |
173-4015 Cylinder Gp-Stick
| 13***59 | Rod As | 1 |
| 16***01 | Seal As-Buffer | 1 |
| 16***12 | Seal-U-Cup | 1 |
206-0509 Cylinder Gp-Stick
| 10***82 | Washer; (11x19.5x2.5-mm Thk) | 1 |
| 11***73 | Piston | 1 |
| 11***57 | Cylinder As | 1 |
169-9529 Cylinder Gp-Swing
| 10***82 | Washer; (11x19.5x2.5-mm Thk) | 1 |
| 11***73 | Piston | 1 |
| 11***59 | Cylinder As; (Rh) | 1 |
191-7735 Cylinder Gp-Swing
| 10***82 | Washer; (11x19.5x2.5-mm Thk) | 1 |
| 11***73 | Piston | 1 |
| 12***94 | Rod As | 1 |
169-9530 Cylinder Gp-Swing
| 10***82 | Washer; (11x19.5x2.5-mm Thk) | 1 |
| 11***73 | Piston | 1 |
| 12***94 | Rod As | 1 |
191-8161 Cylinder Gp-Swing
| 16***92 | Seal As-Buffer | 1 |
| 16***02 | Seal-U-Cup | 1 |
| 16***55 | Seal-Wiper | 1 |
206-3553 Cylinder Gp-Tilt
| 16***73 | Valve Group-Shutoff | 1 |
| 20***53 | Cylinder Group-Tilt | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
192-4128 Cylinder Gp-Tilt
| 16***92 | Seal As-Buffer | 1 |
| 16***02 | Seal-U-Cup | 1 |
| 19***12 | Head | 1 |
185-1851 Cylinder Gp-Tilt
| 16***92 | Seal As-Buffer | 1 |
| 16***02 | Seal-U-Cup | 1 |
| 18***51 | Cylinder Group-Tilt | 1 |
208-8658 Drain Gp-Ecology
| 11***18 | Plate | 1 |
| 11***34 | Adapter | 1 |
| 12***96 | Shaft Group-Pump Drive | 1 |
112-1826 Drive & Mtg Gp-Pump
| 11***26 | Drive & Mtg Group-Pump | 1 |
| 12***17 | Filter-Oil; (Ultra High Efficiency)(Hydraulic, Transmission) | 1 |
| 16***09 | Plug As-Hydraulic | 1 |
178-0094 Filter Gp-Oil -Hydraulic
| 10***01 | Fitting; (Quick Disconnect, Female) | 1 |
| 10***06 | Fitting; (Quick Disconnect, Male) | 1 |
| 17***94 | Filter Group-Oil; -Hydraulic | 1 |
132-8769 Fitting Gp-Hydraulic -Quick Disconnect
| 10***24 | Cylinder Group-Lift; Cylinder Gp-Lift | 2 |
| 11***26 | Drive & Mtg Group-Pump | 1 |
| 13***69 | Fitting Group-Hydraulic; -Quick Disconnect | 1 |
186-5332 Hydraulic Ar -General Purpose Bucket-Locks
| 10***76 | Lines Group-Loader Auxiliary | 1 |
| 14***53 | Lines Group-Lift Cylinder | 1 |
| 16***71 | Lines Group-Lift Cylinder; -Bank Valve | 1 |
186-5334 Hydraulic Ar -Multipurpose Bucket-Locks
| 10***01 | Rod As | 1 |
| 11***94 | Lever As | 1 |
| 12***02 | Spacer; (60.25x75x6-mm Thk) | 1 |
186-5333 Hydraulic Ar -Multipurpose Bucket
| 10***76 | Lines Group-Loader Auxiliary | 1 |
| 13***58 | Housing-Switch | 1 |
| 13***59 | Housing-Detent | 1 |
184-7959 Hydraulic Ar
| 10***24 | Cylinder Group-Lift; Cylinder Gp-Lift | 2 |
| 11***26 | Drive & Mtg Group-Pump | 1 |
| 16***34 | Tank & Mtg Group-Hydraulic | 1 |
184-7960 Hydraulic Ar
| 14***53 | Lines Group-Lift Cylinder | 1 |
| 16***71 | Lines Group-Lift Cylinder; -Bank Valve | 1 |
| 16***63 | Boot | 1 |
186-5331 Hydraulic Ar -General Purpose Bucket
| 13***58 | Housing-Switch | 1 |
| 13***59 | Housing-Detent | 1 |
| 13***79 | Switch As; (Hydraulic Locks) | 1 |
106-9046 Kickout & Positioner Gp
| 10***46 | Kickout & Positioner Group | 1 |
| 17***14 | Film; (Ride Control) | 2 |
| 18***11 | Wiring Group-Ride Control | 1 |
200-6285 Kit-Ride Control
| 10***13 | Block | 4 |
| 10***14 | Plate | 4 |
| 11***98 | Clamp; (Rh) | 2 |
200-6284 Kit-Ride Control
| 17***14 | Film; (Ride Control) | 2 |
| 18***12 | Wiring Group-Ride Control; -Autoshift | 1 |
| 19***84 | Lines Group-Ride Control | 1 |
183-8524 Lines Gp-Backhoe -Narrow Frame
| 14***41 | Connector Group | 2 |
| 17***53 | Bracket | 1 |
| 17***55 | Clamp; (Lh) | 2 |
183-8506 Lines Gp-Backhoe -Standard Frame
| 10***13 | Block | 4 |
| 10***14 | Plate | 4 |
| 11***98 | Clamp; (Rh) | 2 |
183-8545 Lines Gp-Backhoe Auxiliary
| 10***63 | Film-Instruction; (Return Flow)(Return Flow Direction) | 2 |
| 10***09 | Hose As | 1 |
| 10***96 | Tube As | 1 |
183-8546 Lines Gp-Backhoe Auxiliary
| 10***63 | Film-Instruction; (Return Flow)(Return Flow Direction) | 2 |
| 10***09 | Hose As | 1 |
| 10***96 | Tube As | 1 |
183-8508 Lines Gp-Backhoe Auxiliary -Extendable Stick-Standard Frame
| 14***41 | Connector Group | 1 |
| 14***08 | Plug As. | 1 |
| 17***45 | Clamp | 2 |
183-8509 Lines Gp-Backhoe Auxiliary -Standard Stick
| 14***41 | Connector Group | 2 |
| 17***45 | Clamp | 2 |
| 17***52 | Bracket | 1 |
183-8527 Lines Gp-Backhoe Auxiliary -Narrow Frame
| 10***63 | Film-Instruction; (Return Flow)(Return Flow Direction) | 2 |
| 10***09 | Hose As | 1 |
| 10***96 | Tube As | 1 |
199-9618 Lines Gp-Backhoe Auxiliary -Kit
| 10***63 | Film-Instruction; (Return Flow)(Return Flow Direction) | 2 |
| 10***09 | Hose As | 1 |
| 10***96 | Tube As | 1 |
199-9696 Lines Gp-Backhoe Auxiliary -Kit
| 14***27 | Connector Group | 1 |
| 18***43 | Hose As | 1 |
| 19***27 | Hose As | 1 |
183-8507 Lines Gp-Backhoe Auxiliary -Extendable Stick-Standard Frame
| 14***41 | Connector Group | 2 |
| 17***45 | Clamp | 2 |
| 17***52 | Bracket | 1 |
199-9617 Lines Gp-Backhoe Auxiliary -Kit
| 10***63 | Film-Instruction; (Return Flow)(Return Flow Direction) | 2 |
| 10***09 | Hose As | 1 |
| 10***96 | Tube As | 1 |
183-8526 Lines Gp-Backhoe Auxiliary -Narrow Frame
| 14***41 | Connector Group | 1 |
| 14***08 | Plug As. | 1 |
| 17***45 | Clamp | 2 |
183-8534 Lines Gp-Backhoe Auxiliary
| 10***63 | Film-Instruction; (Return Flow)(Return Flow Direction) | 2 |
| 10***09 | Hose As | 1 |
| 10***96 | Tube As | 1 |
199-9695 Lines Gp-Backhoe Auxiliary -Kit
| 10***63 | Film-Instruction; (Return Flow)(Return Flow Direction) | 2 |
| 10***09 | Hose As | 1 |
| 10***96 | Tube As | 1 |
183-8543 Lines Gp-Boom
| 14***28 | Connector Assem. | 1 |
| 14***62 | Elbow Group | 1 |
| 14***55 | Union As | 1 |
9r-3712 Lines Gp-Multipurpose Bucket
| 10***43 | Hose As | 1 |
| 10***44 | Hose As | 1 |
| 13***27 | Hose Assem. | 1 |
193-0703 Lines Gp-Bucket
| 14***61 | Elbow Group | 1 |
| 14***58 | Union, 90 Deg -6 | 1 |
| 17***27 | Hose As | 1 |
9r-5788 Lines Gp-Multipurpose Bucket
| 12***13 | Tee-O-Ring | 1 |
| 14***58 | Connector | 1 |
| 14***25 | Connector As. | 5 |
174-2021 Lines Gp-Bucket
| 14***62 | Elbow Group | 1 |
| 14***55 | Union As | 1 |
| 14***57 | Union Bulkhead; (Orfs) | 1 |
186-1594 Lines Gp-Drain -Boom, Stick Locks
| 16***53 | Tube As | 1 |
| 16***54 | Tube As | 1 |
| 18***94 | Lines Group-Drain; -Boom, Stick Locks | 1 |
186-1593 Lines Gp-Drain
| 14***61 | Elbow Group | 1 |
| 14***58 | Union, 90 Deg -6 | 1 |
| 17***23 | Hose As | 1 |
169-0000 Lines Gp-Extendable Stick
| 14***41 | Connector Group | 2 |
| 16***00 | Lines Group-Extendable Stick | 1 |
| 17***53 | Bracket | 1 |
162-2351 Lines Gp-Extendable Stick
| 10***62 | Plate-Warning; (Secure Extendable Stick) | 2 |
| 10***44 | Tube As | 1 |
| 12***50 | Grommet | 1 |
183-8525 Lines Gp-Hydraulic -Narrow Frame
| 14***56 | Tube As | 1 |
| 14***58 | Tube As | 1 |
| 14***90 | Elbow Group | 2 |
163-9371 Lines Gp-Lift Cylinder -Bank Valve
| 14***22 | Adapter; (-10orb/-12orfs) | 1 |
| 14***25 | Connector As. | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
144-6253 Lines Gp-Lift Cylinder
| 11***25 | Tube As | 1 |
| 11***28 | Tube As | 1 |
| 12***24 | Hose As | 4 |
183-8549 Lines Gp-Load Control Valve -Boom And Stick
| 11***25 | Tube As | 1 |
| 11***28 | Tube As | 1 |
| 12***09 | Tee | 1 |
183-8560 Lines Gp-Load Control Valve -Lift, Tilt
| 08***52 | Adaptor | 1 |
| 11***25 | Tube As | 1 |
| 11***28 | Tube As | 1 |
106-5876 Lines Gp-Loader Auxiliary
| 10***42 | Hose As | 1 |
| 10***76 | Lines Group-Loader Auxiliary | 1 |
| 11***20 | Hose As | 1 |
202-5928 Lines Gp-Pilot -Stabilizer
| 10***87 | Tee As | 1 |
| 14***16 | Connector Group | 1 |
| 15***62 | Tee As | 1 |
186-4168 Lines Gp-Pilot -Stabilizer
| 13***13 | Band; (Marker) (Gray, P) | 2 |
| 14***25 | Connector As. | 2 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
188-9097 Lines Gp-Pilot
| 12***13 | Tee-O-Ring | 1 |
| 14***58 | Connector | 1 |
| 14***25 | Connector As. | 7 |
202-6139 Lines Gp-Pilot
| 10***87 | Tee As | 1 |
| 12***04 | Hose As | 1 |
| 14***16 | Connector Group | 3 |
209-1795 Lines Gp-Pump
| 14***29 | Tee As-Orfs | 1 |
| 17***94 | Hose As | 1 |
| 17***81 | Valve Group-Check; -Back Pressure | 1 |
190-8954 Lines Gp-Pump
| 05***58 | "P" Clip | 1 |
| 11***45 | Clamp-Hose | 4 |
| 11***77 | Bracket As | 1 |
191-3804 Lines Gp-Pump
| 14***31 | Tee Group | 1 |
| 19***63 | Hose As | 1 |
| 19***64 | Hose As | 1 |
191-3761 Lines Gp-Pump
| 14***35 | Connect Group; (Each Includes) | 1 |
| 14***29 | Tee As-Orfs | 1 |
| 19***63 | Hose As | 1 |
196-9913 Lines Gp-Pump
| 11***45 | Clamp-Hose | 4 |
| 11***77 | Bracket As | 1 |
| 13***84 | Clip | 1 |
191-5465 Lines Gp-Pump
| 14***29 | Tee As-Orfs | 1 |
| 16***94 | Connector As | 1 |
| 19***63 | Hose As | 1 |
191-6815 Lines Gp-Pump
| 14***29 | Tee As-Orfs | 1 |
| 19***64 | Hose As | 1 |
| 19***15 | Lines Group-Pump | 1 |
176-9297 Lines Gp-Return
| 14***29 | Tee As-Orfs | 1 |
| 17***97 | Lines Group-Return | 1 |
| 17***80 | Valve Group-Check; -Return Oil | 1 |
176-9298 Lines Gp-Return
| 10***33 | Clip; (Slot) | 2 |
| 10***34 | Clip; (Tab) | 2 |
| 14***16 | Connector Group | 1 |
200-3063 Lines Gp-Ride Control -Kit
| 10***15 | Tube As | 1 |
| 14***66 | Elbow Group | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
195-1284 Lines Gp-Ride Control
| 10***30 | Film; (Warning) (Accumulator Pressure) (On Bracket Covering Brake Accumulator) | 1 |
| 10***33 | Clip; (Slot) | 2 |
| 10***34 | Clip; (Tab) | 2 |
183-8530 Lines Gp-Sideshift Lock -Standard Frame
| 10***15 | Tube As | 1 |
| 14***66 | Elbow Group | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
175-7618 Lines Gp-Sideshift Lock -Standard Frame
| 10***15 | Tube As | 1 |
| 14***66 | Elbow Group | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
183-8532 Lines Gp-Sideshift Lock -Narrow Frame
| 14***27 | Connector Group | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***45 | Connector As | 6 |
183-8523 Lines Gp-Sideshift Lock -Narrow Frame
| 10***15 | Tube As | 1 |
| 14***66 | Elbow Group | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
185-9751 Lines Gp-Stabilizer
| 14***41 | Connector Group | 1 |
| 18***51 | Lines Group-Stabilizer | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
185-3414 Lines Gp-Stabilizer
| 14***27 | Connector Group | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***45 | Connector As | 6 |
183-8547 Lines Gp-Stick -Extension
| 10***62 | Plate-Warning; (Secure Extendable Stick) | 2 |
| 10***44 | Tube As | 1 |
| 10***17 | Hose As | 1 |
183-8548 Lines Gp-Stick -Extension
| 10***99 | Hose As | 2 |
| 10***83 | Tube As | 1 |
| 14***42 | Connector Group | 2 |
183-8544 Lines Gp-Stick
| 10***44 | Tube As | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 16***56 | Tube As | 2 |
183-8505 Lines Gp-Swing -Standard Frame
| 10***99 | Hose As | 2 |
| 10***83 | Tube As | 1 |
| 14***42 | Connector Group | 2 |
183-8522 Lines Gp-Swing -Narrow Frame
| 12***22 | Bracket As | 1 |
| 14***41 | Connector Group | 2 |
| 14***90 | Elbow Group | 1 |
189-0555 Lines Gp-Tilt Cylinder
| 18***55 | Lines Group-Tilt Cylinder | 1 |
| 19***09 | Valve Group-Relief | 1 |
| 19***38 | Orifice | 1 |
239-2226 Manifold Gp-Control
| 14***46 | Kit-Seal; (Valve) | 1 |
| 16***69 | Orifice As | 2 |
| 17***75 | Valve Group-Solenoid | 1 |
202-2236 Manifold Gp-Control
| 19***75 | Valve Group-Check | 1 |
| 19***80 | Spring | 1 |
| 19***12 | Seal-O-Ring | 1 |
190-8315 Manifold Gp-Ride Control
| 19***15 | Manifold Group-Ride Control | 1 |
| 19***54 | Spacer; (11.8x20x45-mm Thk) | 2 |
| 8T***89 | Locknut; (M10x1.15-Thd) | 2 |
185-1598 Mounting Gp-Bank Valve -Loader, Mechanical
| 18***98 | Mounting Group-Bank Valve; -Loader, Mechanical | 1 |
| 20***91 | Bracket As | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 5 |
185-3167 Mounting Gp-Bank Valve -Backhoe
| 18***67 | Mounting Group-Bank Valve; -Backhoe | 1 |
| 3B***17 | Cotter; (Pin) | 4 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 4 |
9r-4668 Mounting Gp-Cylinder -Multipurpose Bucket
| 14***08 | Plug As. | 2 |
| 17***53 | Bracket | 1 |
| 17***55 | Clamp; (Lh) | 2 |
172-8508 Mounting Gp-Lines
| 17***08 | Mounting Group-Lines | 1 |
| 17***45 | Clamp | 2 |
| 17***52 | Bracket | 1 |
186-2950 Mounting Gp-Lines
| 08***19 | Pin | 1 |
| 09***05 | Bolt-Socket Head; (M14x2x40-mm) | 4 |
| 10***20 | Carrier-Pin | 1 |
175-7620 Mounting Gp-Lines
| 10***58 | Block | 2 |
| 10***59 | Block | 2 |
| 11***98 | Block | 1 |
180-9588 Pump Gp-Piston
| 12***24 | Plate-Valve | 1 |
| 16***79 | Pin | 3 |
| 18***88 | Pump Group-Piston | 1 |
120-5726 Rotating Gp-Pump
| 12***26 | Rotating Group-Pump; -Steering | 1 |
| 13***50 | Ring-Retaining | 1 |
128-5596 Shaft Gp-Pump Drive
| 12***96 | Shaft Group-Pump Drive | 1 |
| 18***78 | Mounting Group-Stabilizer Control | 1 |
| 18***02 | Valve Group-Pilot; -Stabilizer | 1 |
186-3134 Stabilizer Ar
| 18***78 | Mounting Group-Stabilizer Control | 1 |
| 18***01 | Valve Group-Pilot; -Stabilizer | 1 |
| 18***07 | Wiring Group-Stabilizer Alarm; -Warning | 1 |
186-3135 Stabilizer Ar
| 11***49 | Hose | 1 |
| 12***26 | Clamp | 2 |
| 12***67 | Cap-Filler | 1 |
163-7934 Tank & Mtg Gp-Hydraulic
| 16***34 | Tank & Mtg Group-Hydraulic | 1 |
| 18***98 | Valve Group-Bank 2; -Stabilizer | 1 |
| 19***01 | Stud-Taperlock | 4 |
185-9784 Valve & Mtg Gp-Bank -Stabilizer
| 18***03 | Valve Group-Bank 4; -Backhoe | 1 |
| 18***84 | Valve & Mtg Group-Bank; -Stabilizer | 1 |
| 19***13 | Lines Group-Pump | 1 |
186-4967 Valve Ar-Bank 4
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 16***99 | Switch As-Rocker; (Hydraulic Lockout)(Hydraulic Shut Off) | 1 |
| 17***93 | Valve Group-Solenoid | 1 |
186-4970 Valve Ar-Bank 4
| 16***40 | Control Group-Hydraulic Pedal | 1 |
| 18***04 | Valve Group-Bank 5; -Backhoe | 2 |
| 18***70 | Valve Ar-Bank 4 | 1 |
186-4968 Valve Ar-Bank 5
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 16***40 | Control Group-Hydraulic Pedal | 1 |
| 16***99 | Switch As-Rocker; (Hydraulic Lockout)(Hydraulic Shut Off) | 1 |
186-4971 Valve Ar-Bank 5
| 14***08 | Plug As. | 2 |
| 16***40 | Control Group-Hydraulic Pedal | 1 |
| 16***50 | Control Group-Hydraulic Pedal | 1 |
186-4972 Valve Ar-Bank 6
| 11***28 | Stud | 3 |
| 16***40 | Control Group-Hydraulic Pedal | 1 |
| 16***86 | Hose As | 1 |
186-4969 Valve Ar-Bank 6
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***08 | Plug As. | 2 |
| 16***40 | Control Group-Hydraulic Pedal | 1 |
204-9195 Valve Gp-Auxiliary -Kit
| 11***28 | Stud | 3 |
| 16***40 | Control Group-Hydraulic Pedal | 1 |
| 18***21 | Hose As | 1 |
204-9200 Valve Gp-Auxiliary -Kit
| 14***11 | Bolt-Socket Head; (M6x1x16-mm) | 16 |
| 19***26 | Cover-End | 1 |
| 19***27 | Valve Group-Control; -Stabilizer | 2 |
204-9197 Valve Gp-Auxiliary -Kit
| 10***17 | Stud; (3/8-16-Thd) | 3 |
| 16***40 | Control Group-Hydraulic Pedal | 1 |
| 16***86 | Hose As | 1 |
204-9196 Valve Gp-Auxiliary -Kit
| 14***31 | Tee Group | 1 |
| 16***50 | Control Group-Hydraulic Pedal | 1 |
| 19***50 | Valve Group-Control; -Extendable Stick;Auxiliary | 1 |
204-9199 Valve Gp-Auxiliary -Kit
| 11***16 | Stud; (3/8-16-2a Thd X 393.7mm) | 3 |
| 14***31 | Tee Group | 1 |
| 16***50 | Control Group-Hydraulic Pedal | 1 |
204-9198 Valve Gp-Auxiliary -Kit
| 10***17 | Stud; (3/8-16-Thd) | 3 |
| 16***40 | Control Group-Hydraulic Pedal | 1 |
| 18***21 | Hose As | 1 |
185-5906 Valve Gp-Bank 2 -Loader
| 12***18 | Valve Group-Control; -Auxiliary | 1 |
| 13***20 | Valve Group-Control; -Lift | 1 |
| 16***61 | Valve Group-Control; -Tilt | 1 |
185-5898 Valve Gp-Bank 2
| 13***20 | Valve Group-Control; -Lift | 1 |
| 16***61 | Valve Group-Control; -Tilt | 1 |
| 18***98 | Valve Group-Bank 2; -Stabilizer | 1 |
185-5907 Valve Gp-Bank 3 -Loader
| 16***50 | Valve Group-Control; -Swing | 1 |
| 18***07 | Valve Group-Bank 3; -Loader | 1 |
| 18***72 | Valve Group-Control | 1 |
185-5903 Valve Gp-Bank 4 -Backhoe
| 16***50 | Valve Group-Control; -Swing | 1 |
| 18***03 | Valve Group-Bank 4; -Backhoe | 1 |
| 19***28 | Valve Group-Control; -Bucket | 1 |
180-8599 Valve Gp-Bank 4
| 16***50 | Valve Group-Control; -Swing | 1 |
| 18***99 | Valve Group-Bank 4 | 1 |
| 19***28 | Valve Group-Control; -Bucket | 1 |
203-5483 Valve Gp-Bank 4 -Backhoe
| 11***28 | Stud | 3 |
| 16***50 | Valve Group-Control; -Swing | 1 |
| 18***72 | Valve Group-Control | 1 |
203-5484 Valve Gp-Bank 5 -Backhoe
| 16***50 | Valve Group-Control; -Swing | 1 |
| 18***72 | Valve Group-Control | 1 |
| 19***28 | Valve Group-Control; -Bucket | 1 |
185-5904 Valve Gp-Bank 5 -Backhoe
| 11***28 | Stud | 3 |
| 16***50 | Valve Group-Control; -Swing | 1 |
| 18***04 | Valve Group-Bank 5; -Backhoe | 1 |
180-8600 Valve Gp-Bank 5
| 10***17 | Stud; (3/8-16-Thd) | 3 |
| 16***50 | Valve Group-Control; -Swing | 1 |
| 18***00 | Valve Group-Bank 5 | 1 |
185-5905 Valve Gp-Bank 6 -Backhoe
| 16***50 | Valve Group-Control; -Swing | 1 |
| 18***05 | Valve Group-Bank 6; -Backhoe | 1 |
| 19***28 | Valve Group-Control; -Bucket | 1 |
180-8601 Valve Gp-Bank 6
| 11***16 | Stud; (3/8-16-2a Thd X 393.7mm) | 3 |
| 16***50 | Valve Group-Control; -Swing | 1 |
| 18***01 | Valve Group-Bank 6 | 1 |
203-5485 Valve Gp-Bank 6 -Backhoe
| 20***85 | Valve Group-Bank 6; -Backhoe | 1 |
| 5K***90 | Seal-To Hydraulic Cooler Inlet Port | 1 |
| 7M***85 | Seal,Adapter,Motor Part Of Kit P/N 5r***29 | 1 |
178-7481 Valve Gp-Check -Back Pressure
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 2 |
| 03***85 | Bolt 5t***57 Plate As To Fuel Pump Group | 1 |
| 12***76 | Seat As-Shuttle | 1 |
178-7480 Valve Gp-Check -Return Oil
| 17***80 | Valve Group-Check; -Return Oil | 1 |
| 5K***90 | Seal-To Hydraulic Cooler Inlet Port | 2 |
| 7M***85 | Seal,Adapter,Motor Part Of Kit P/N 5r***29 | 1 |
168-0361 Valve Gp-Control -Tilt
| 12***14 | Plate-Support-Lh | 3 |
| 16***61 | Valve Group-Control; -Tilt | 1 |
| 19***83 | Valve Group-Control; -Swing | 1 |
124-8818 Valve Gp-Control -Auxiliary
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 2 |
| 10***63 | Spacer-Detent | 1 |
| 10***64 | Spring | 1 |
166-7950 Valve Gp-Control -Swing
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***76 | Seat As-Shuttle | 1 |
190-3430 Valve Gp-Control -Stick
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 2 |
| 10***85 | Seal-O-Ring (6.07mm Id) | 1 |
| 12***76 | Seat As-Shuttle | 1 |
192-0827 Valve Gp-Control -Stabilizer
| 10***27 | Valve Group-Sequence | 1 |
| 10***30 | Valve Group-Check | 1 |
| 15***50 | Valve Group-Load Control | 1 |
190-3450 Valve Gp-Control
| 11***06 | Retainer Spring | 2 |
| 12***76 | Seat As-Shuttle | 1 |
| 12***96 | Valve Group-Check; (Primary Resolver) | 1 |
188-7472 Valve Gp-Control
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 2 |
| 03***85 | Bolt 5t***57 Plate As To Fuel Pump Group | 1 |
| 12***76 | Seat As-Shuttle | 1 |
190-3428 Valve Gp-Control -Bucket
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 2 |
| 10***85 | Seal-O-Ring (6.07mm Id) | 1 |
| 12***76 | Seat As-Shuttle | 1 |
190-3431 Valve Gp-Control -Boom
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 2 |
| 03***85 | Bolt 5t***57 Plate As To Fuel Pump Group | 1 |
| 12***76 | Seat As-Shuttle | 1 |
130-6520 Valve Gp-Control -Lift
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 2 |
| 0S***14 | Bolt (.25" Diameter-.50" Long) | 1 |
| 12***76 | Seat As-Shuttle | 1 |
191-4483 Valve Gp-Control -Swing
| 19***83 | Valve Group-Control; -Swing | 1 |
| 19***28 | Valve Group-Compensating; (Stabilizer) | 1 |
| 19***60 | Cover As | 1 |
200-1728 Valve Gp-Pilot -Stabilizer
| 03***43 | Seal-O-Ring | 1 |
| 10***45 | Valve-Orifice; (Hydraulic Oil Check) | 1 |
| 19***36 | Spring | 1 |
200-1722 Valve Gp-Pilot -Stabilizer
| 11***81 | Plate | 1 |
| 15***66 | Kit-Spring; (Pilot Valve) | 1 |
| 19***98 | Boot | 1 |
185-5901 Valve Gp-Pilot -Stabilizer
| 17***41 | Nut; (M8x6.5-mm) | 2 |
| 18***01 | Valve Group-Pilot; -Stabilizer | 1 |
| 19***15 | Kit-Seal; (Pilot Valve) | 1 |
185-5902 Valve Gp-Pilot -Two Lever
| 11***81 | Plate | 1 |
| 15***66 | Kit-Spring; (Pilot Valve) | 1 |
| 18***02 | Valve Group-Pilot; -Stabilizer | 1 |
200-1726 Valve Gp-Pilot -Stabilizer
| 11***81 | Plate | 1 |
| 15***66 | Kit-Spring; (Pilot Valve) | 1 |
| 19***98 | Boot | 1 |
200-1723 Valve Gp-Pilot -Stabilizer
| 11***81 | Plate | 1 |
| 15***66 | Kit-Spring; (Pilot Valve) | 1 |
| 19***98 | Boot | 1 |
173-0640 Valve Gp-Pump Control -Pressure, Flow Compensator
| 03***44 | Seal-O-Ring | 1 |
| 10***34 | Plug | 1 |
| 10***35 | Spring | 1 |
215-9232 Valve Gp-Pump Control
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***66 | Cartridge Assem. | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
171-8775 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***70 | Nut; (1/2-20-2b-Thd) | 2 |
| 17***75 | Valve Group-Solenoid | 1 |
179-5593 Valve Gp-Solenoid
| 11***98 | Boss | 1 |
| 12***87 | Ring-Retaining | 2 |
| 12***10 | Pin | 1 |
3e-8622 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***35 | Kit-Seal | 1 |
| 15***70 | Nut; (1/2-20-2b-Thd) | 1 |
Implements
129-9121 Arm Gp-Lift
| 12***21 | Arm Group-Lift | 1 |
| 15***97 | Boom Group | 1 |
154-5383 Boom Ar
| 10***21 | Boss-Threaded; (M12x1.75-Thd) | 3 |
| 11***83 | Boss; (M10x1.5-Thd) | 2 |
| 15***83 | Boom Ar | 1 |
159-2797 Boom Gp
| 13***97 | Brace As; (Lift Cylinder) | 1 |
| 15***97 | Boom Group | 1 |
| 8C***47 | Film-Indicator (On Loader Lift Arm) | 1 |
9r-0036 Brace Gp-Lift Cylinder
| 10***11 | Block | 2 |
| 15***78 | Boss | 2 |
| 18***76 | Block | 2 |
184-6784 Housing As-Extendable Stick
| 14***37 | Guide As; (Rh) | 1 |
| 14***44 | Guide As; (Lh) | 1 |
| 15***65 | Link As | 1 |
167-8330 Linkage Gp-Backhoe Bucket
| 10***17 | Plate | 1 |
| 10***47 | Guide As; (Rh) | 1 |
| 11***37 | Washer; (46x70x1-mm Thk)(1mm`Thk) | 10 |
151-7928 Linkage Gp-Backhoe Bucket
| 15***28 | Linkage Group-Backhoe Bucket | 1 |
| 15***77 | Pin | 1 |
| 15***78 | Pin | 2 |
9r-9140 Linkage Gp-Loader Bucket
| 11***58 | Bracket | 2 |
| 22***70 | Sling As | 2 |
| 8T***22 | Washer-Hard-To Lock Carrier Rollers | 2 |
113-0081 Lock Gp-Stabilizer Leg
| 11***81 | Lock Group-Stabilizer Leg | 1 |
| 11***87 | Brace As | 1 |
| 11***48 | Pin | 1 |
177-4726 Lock Gp-Transport -Extendable Stick
| 17***26 | Lock Group-Transport; -Extendable Stick | 1 |
| 17***33 | Cable As | 1 |
| 9R***01 | Pin-Cotter | 2 |
121-9797 Lock Gp-Transport -Loader
| 11***90 | Pin As | 1 |
| 12***97 | Lock Group-Transport; -Loader | 1 |
| 12***32 | Brace As | 1 |
122-8037 Lock Gp-Transport -Loader
| 12***37 | Lock Group-Transport; -Loader | 1 |
| 17***29 | Cable As | 1 |
| 9R***01 | Pin-Cotter | 2 |
183-6076 Lock Gp-Transport -Stabilizer
| 12***60 | Washer-Thrust; (57.5x114.3x1-mm Thk)(1mm Thk) | 3 |
| 15***35 | Pin | 1 |
| 15***61 | Pin | 1 |
177-4727 Lock Gp-Transport -Standard Stick
| 10***89 | Bolt; (M8x1.25x130-mm) | 2 |
| 16***95 | Knob | 1 |
| 17***27 | Lock Group-Transport; -Standard Stick | 1 |
152-9736 Mounting Gp-Stick
| 12***60 | Washer-Thrust; (57.5x114.3x1-mm Thk)(1mm Thk) | 3 |
| 15***36 | Mounting Group-Stick | 1 |
| 15***61 | Pin | 1 |
184-9950 Mounting Gp-Stick
| 16***70 | Pad As-Stabilizer; (Street) | 4 |
| 18***50 | Mounting Group-Stick | 1 |
| 8T***93 | Bolt-Plt; (M16 X 2.0 X 50) | 12 |
9r-0868 Pad Gp-Stabilizer -Street
| 13***37 | Pad-Stabilizer | 2 |
| 18***13 | Pin As | 2 |
| 18***34 | Shim; (5.5-mm Thk) | 2 |
126-5707 Stabilizer Gp-Backhoe
| 11***54 | Shim; (1-mm Thk)(Round) | 4 |
| 12***07 | Stabilizer Group-Backhoe | 1 |
| 15***86 | Cylinder Group-Extendable Stick | 1 |
184-9754 Stick Gp-Extendable
| 10***11 | Block | 2 |
| 11***54 | Shim; (1-mm Thk)(Round) | 4 |
| 15***86 | Cylinder Group-Extendable Stick | 1 |
197-2733 Stick Gp-Extendable
| 10***11 | Block | 2 |
| 12***60 | Washer-Thrust; (57.5x114.3x1-mm Thk)(1mm Thk) | 1 |
| 14***28 | Stick As | 1 |
151-7316 Stick Gp-Hoe
| 10***65 | Bucket Group-Multipurpose | 1 |
| 15***16 | Stick Group-Hoe | 1 |
| 18***39 | Cylinder Group-Multipurpose Bukt | 2 |
Lubrication System
202-5913 Breather Gp
| 03***46 | Gasket | 1 |
| 13***89 | Clip; (Ladder) | 2 |
| 13***55 | Hose; (8-cm) | 0 |
120-8469 Gauge Gp-Oil Level & Filler -With Filter
| 12***69 | Gauge Group-Oil Level & Filler; -With Filter | 1 |
| 12***17 | Hose | 1 |
| 12***18 | Bracket | 1 |
185-3196 Pump Gp-Engine Oil
| 06***27 | Bushing-Terminal | 1 |
| 06***28 | Circlip | 1 |
| 10***15 | Bolt | 3 |
185-4621 Pump Gp-Engine Oil
| 06***27 | Bushing-Terminal | 1 |
| 06***28 | Circlip | 1 |
| 10***15 | Bolt | 3 |
Machine Arrangement
186-2539 Backhoe Ar-Extendable Stick
| 16***30 | Linkage Group-Backhoe Bucket | 1 |
| 17***18 | Lines Group-Sideshift Lock; -Standard Frame | 1 |
| 17***97 | Lines Group-Return | 1 |
186-2542 Backhoe Ar-Extendable Stick
| 16***30 | Linkage Group-Backhoe Bucket | 1 |
| 17***18 | Lines Group-Sideshift Lock; -Standard Frame | 1 |
| 17***97 | Lines Group-Return | 1 |
184-7886 Backhoe Ar-Extendable Stick
| 15***28 | Linkage Group-Backhoe Bucket | 1 |
| 15***36 | Mounting Group-Stick | 1 |
| 17***18 | Lines Group-Sideshift Lock; -Standard Frame | 1 |
186-1433 Backhoe Ar-Extendable Stick
| 15***28 | Linkage Group-Backhoe Bucket | 1 |
| 15***36 | Mounting Group-Stick | 1 |
| 16***00 | Lines Group-Extendable Stick | 1 |
186-1434 Backhoe Ar-Extendable Stick
| 15***28 | Linkage Group-Backhoe Bucket | 1 |
| 15***36 | Mounting Group-Stick | 1 |
| 17***77 | Link Group-Shipping; -For Shipping Only | 1 |
186-1435 Backhoe Ar-Extendable Stick
| 15***28 | Linkage Group-Backhoe Bucket | 1 |
| 15***36 | Mounting Group-Stick | 1 |
| 17***77 | Link Group-Shipping; -For Shipping Only | 1 |
184-7885 Backhoe Ar-Extendable Stick
| 15***28 | Linkage Group-Backhoe Bucket | 1 |
| 15***36 | Mounting Group-Stick | 1 |
| 17***18 | Lines Group-Sideshift Lock; -Standard Frame | 1 |
186-2541 Backhoe Ar-Extendable Stick
| 16***30 | Linkage Group-Backhoe Bucket | 1 |
| 17***18 | Lines Group-Sideshift Lock; -Standard Frame | 1 |
| 17***97 | Lines Group-Return | 1 |
186-1432 Backhoe Ar-Extendable Stick
| 15***28 | Linkage Group-Backhoe Bucket | 1 |
| 15***36 | Mounting Group-Stick | 1 |
| 17***77 | Link Group-Shipping; -For Shipping Only | 1 |
186-2546 Backhoe Ar-Extendable Stick
| 16***30 | Linkage Group-Backhoe Bucket | 1 |
| 17***97 | Lines Group-Return | 1 |
| 18***59 | Frame Group-Swing | 1 |
184-7884 Backhoe Ar-Extendable Stick
| 15***28 | Linkage Group-Backhoe Bucket | 1 |
| 15***36 | Mounting Group-Stick | 1 |
| 16***00 | Lines Group-Extendable Stick | 1 |
186-2545 Backhoe Ar-Extendable Stick
| 16***30 | Linkage Group-Backhoe Bucket | 1 |
| 17***97 | Lines Group-Return | 1 |
| 18***59 | Frame Group-Swing | 1 |
186-2544 Backhoe Ar-Extendable Stick
| 16***30 | Linkage Group-Backhoe Bucket | 1 |
| 17***97 | Lines Group-Return | 1 |
| 18***59 | Frame Group-Swing | 1 |
186-2543 Backhoe Ar-Extendable Stick
| 16***30 | Linkage Group-Backhoe Bucket | 1 |
| 17***97 | Lines Group-Return | 1 |
| 18***59 | Frame Group-Swing | 1 |
184-7887 Backhoe Ar-Extendable Stick
| 15***28 | Linkage Group-Backhoe Bucket | 1 |
| 15***36 | Mounting Group-Stick | 1 |
| 16***00 | Lines Group-Extendable Stick | 1 |
186-2540 Backhoe Ar-Extendable Stick
| 16***30 | Linkage Group-Backhoe Bucket | 1 |
| 17***18 | Lines Group-Sideshift Lock; -Standard Frame | 1 |
| 17***97 | Lines Group-Return | 1 |
186-1429 Backhoe Ar-Standard Stick
| 15***16 | Stick Group-Hoe | 1 |
| 15***28 | Linkage Group-Backhoe Bucket | 1 |
| 17***77 | Link Group-Shipping; -For Shipping Only | 1 |
186-1430 Backhoe Ar-Standard Stick
| 15***16 | Stick Group-Hoe | 1 |
| 15***28 | Linkage Group-Backhoe Bucket | 1 |
| 17***08 | Mounting Group-Lines | 1 |
184-7878 Backhoe Ar-Standard Stick
| 15***16 | Stick Group-Hoe | 1 |
| 15***28 | Linkage Group-Backhoe Bucket | 1 |
| 17***20 | Mounting Group-Lines | 1 |
184-7879 Backhoe Ar-Standard Stick
| 15***16 | Stick Group-Hoe | 1 |
| 15***28 | Linkage Group-Backhoe Bucket | 1 |
| 17***20 | Mounting Group-Lines | 1 |
184-7881 Backhoe Ar-Standard Stick
| 15***16 | Stick Group-Hoe | 1 |
| 15***28 | Linkage Group-Backhoe Bucket | 1 |
| 17***18 | Lines Group-Sideshift Lock; -Standard Frame | 1 |
184-7880 Backhoe Ar-Standard Stick
| 15***16 | Stick Group-Hoe | 1 |
| 15***28 | Linkage Group-Backhoe Bucket | 1 |
| 17***18 | Lines Group-Sideshift Lock; -Standard Frame | 1 |
186-1426 Backhoe Ar-Standard Stick
| 15***16 | Stick Group-Hoe | 1 |
| 15***28 | Linkage Group-Backhoe Bucket | 1 |
| 17***20 | Mounting Group-Lines | 1 |
186-1428 Backhoe Ar-Standard Stick
| 15***16 | Stick Group-Hoe | 1 |
| 15***28 | Linkage Group-Backhoe Bucket | 1 |
| 17***77 | Link Group-Shipping; -For Shipping Only | 1 |
184-7883 Backhoe Ar-Standard Stick
| 15***16 | Stick Group-Hoe | 1 |
| 15***28 | Linkage Group-Backhoe Bucket | 1 |
| 17***08 | Mounting Group-Lines | 1 |
184-7882 Backhoe Ar-Standard Stick
| 15***16 | Stick Group-Hoe | 1 |
| 15***28 | Linkage Group-Backhoe Bucket | 1 |
| 17***08 | Mounting Group-Lines | 1 |
186-1427 Backhoe Ar-Standard Stick
| 15***16 | Stick Group-Hoe | 1 |
| 15***28 | Linkage Group-Backhoe Bucket | 1 |
| 17***20 | Mounting Group-Lines | 1 |
186-1431 Backhoe Ar-Standard Stick
| 15***16 | Stick Group-Hoe | 1 |
| 15***28 | Linkage Group-Backhoe Bucket | 1 |
| 17***08 | Mounting Group-Lines | 1 |
184-7867 Chassis Ar
| 11***08 | Frame Group-Sliding | 1 |
| 12***07 | Stabilizer Group-Backhoe | 1 |
| 16***76 | Control Group-Governor | 1 |
184-7868 Chassis Ar
| 11***08 | Frame Group-Sliding | 1 |
| 12***07 | Stabilizer Group-Backhoe | 1 |
| 16***76 | Control Group-Governor | 1 |
184-7847 Common Ar
| 10***13 | Loader Ar | 1 |
| 14***53 | Lines Group-Lift Cylinder | 1 |
| 15***83 | Boom Ar | 1 |
184-7848 Common Ar
| 10***13 | Loader Ar | 1 |
| 14***53 | Lines Group-Lift Cylinder | 1 |
| 15***83 | Boom Ar | 1 |
190-6413 Conversion Ar-Certification -Extendable Stick
| 10***15 | Film; (Reflector) | 1 |
| 10***19 | Plate As-Side Reflective | 3 |
| 10***47 | Mounting Group-Registration | 1 |
156-5126 Conversion Ar-Certification
| 12***74 | Plate As | 1 |
| 13***07 | Pin | 1 |
| 15***53 | Film | 1 |
206-3409 Conversion Ar-Certification -Autoshift
| 10***27 | Film-Identification; (20-Km/H)(20 Kph) | 4 |
| 11***18 | Installation Ar-Wheel Chock | 1 |
| 13***10 | Film-Instruction; (Wheel Chock) | 1 |
206-4924 Conversion Ar-Certification -Standard Shift
| 03***32 | Strap--Harness Assembly To Compressor | 4 |
| 10***27 | Film-Identification; (20-Km/H)(20 Kph) | 4 |
| 11***18 | Installation Ar-Wheel Chock | 1 |
185-0065 Conversion Ar-Certification -Side Shift-Pilot Loader
| 11***81 | Lock Group-Stabilizer Leg | 1 |
| 15***84 | Reflector Group; -Side Shift | 1 |
| 18***65 | Conversion Ar-Certification; -Side Shift-Pilot Loader | 1 |
149-1833 Conversion Ar-Certification
| 03***32 | Strap--Harness Assembly To Compressor | 4 |
| 10***09 | Guard Group-Bucket | 1 |
| 10***86 | Kit-First Aid | 1 |
190-2802 Conversion Ar-Certification -Sideshift-Mechanical Loader
| 10***04 | Control Group-Hydraulic Lockout | 1 |
| 11***81 | Lock Group-Stabilizer Leg | 1 |
| 15***84 | Reflector Group; -Side Shift | 1 |
190-2803 Conversion Ar-Certification
| 10***47 | Mounting Group-Registration | 1 |
| 11***20 | Guard Group-Lighting | 1 |
| 11***21 | Cover As | 1 |
123-4202 Conversion Ar-Certification
| 11***17 | Mounting Group-Registration | 1 |
| 12***02 | Conversion Ar-Certification | 1 |
| 19***96 | Radio Group; -Cassette | 1 |
184-7950 Drive Ar-Backhoe Loader
| 11***65 | Axle & Mtg Group-Rear | 1 |
| 16***59 | Pump Group-Metering; -Hmu | 1 |
| 18***50 | Drive Ar-Backhoe Loader | 1 |
184-7936 Drive Ar-Backhoe Loader
| 11***65 | Axle & Mtg Group-Rear | 1 |
| 11***37 | Steering Group-Hydraulic | 1 |
| 15***65 | Axle Group-Front | 1 |
107-3313 Loader Ar
| 10***46 | Kickout & Positioner Group | 1 |
| 10***13 | Loader Ar | 1 |
| 12***45 | Wiring Group-Kickout & Positioner | 1 |
185-1125 Suppression Ar-Sound
| 18***25 | Suppression Ar-Sound | 1 |
| 19***61 | Lines Group-Pump | 1 |
| 19***63 | Air Cleaner Group | 1 |
185-1128 Suppression Ar-Sound
| 14***20 | Liner Group-Sound Suppression | 1 |
| 18***28 | Suppression Ar-Sound | 1 |
| 19***61 | Lines Group-Pump | 1 |
185-1127 Suppression Ar-Sound
| 14***20 | Liner Group-Sound Suppression | 1 |
| 18***27 | Suppression Ar-Sound | 1 |
| 19***61 | Lines Group-Pump | 1 |
209-1789 Suppression Ar-Sound
| 19***63 | Air Cleaner Group | 1 |
| 20***89 | Suppression Ar-Sound | 1 |
| 20***95 | Lines Group-Pump | 1 |
Operator Station
164-1032 Air Conditioner & Mounting Gp
| 13***40 | Compressor & Mtg Group-Refrig | 1 |
| 14***22 | Condenser & Mtg Group-Refrigerant | 1 |
| 16***32 | Air Conditioner & Mounting Group | 2 |
185-1484 Air Conditioner Ar
| 13***40 | Compressor & Mtg Group-Refrig | 1 |
| 14***22 | Condenser & Mtg Group-Refrigerant | 1 |
| 16***32 | Air Conditioner & Mounting Group | 1 |
193-4724 Air Conditioner Ar
| 11***31 | Switch-Temperature; (Air Conditioner) | 1 |
| 12***78 | Locknut; (M6x1-Thd) | 4 |
| 16***39 | Coil As | 1 |
170-0075 Air Conditioner Gp
| 17***75 | Air Conditioner Group | 1 |
| 3E***12 | Nut-Square; (3/8-16-Thd) | 1 |
| 6V***87 | Screw-Pan Head; (10-24x1-In) | 4 |
8y-5904 Armrest Gp
| 11***37 | Film; (Caterpillar, Sun Visor)(Windshield Sun Visor) | 1 |
| 16***75 | Cab Group-Enclosed Rops | 1 |
| 16***49 | Fender Group-Rear | 1 |
184-9740 Cab Ar-Enclosed Rops
| 10***11 | Screw-Machine; (3/8-16x0.75-In) | 1 |
| 11***14 | Pin | 1 |
| 12***56 | Bushing | 8 |
164-1075 Cab Gp-Enclosed Rops
| 13***81 | Cover Group-Hood | 1 |
| 16***75 | Cab Group-Enclosed Rops | 1 |
| 16***75 | Canopy Group-Open Rops | 1 |
184-9739 Canopy Ar-Open Rops
| 15***65 | Kit-Connecting Plug; (8-Pin)(Electronic Control Channel) | 1 |
| 16***39 | Plate As | 1 |
| 16***71 | Glass; (Front, Rh) | 1 |
164-1175 Canopy Gp-Open Rops
| 10***11 | Support | 1 |
| 13***41 | Plate | 1 |
| 13***42 | Bracket As | 1 |
137-7140 Compressor & Mtg Gp-Refrig
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***40 | Compressor & Mtg Group-Refrig | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 2 |
3e-1908 Compressor Gp-Refrigerant
| 14***08 | Spacer; (10x19.5x61-mm Thk) | 2 |
| 15***61 | Bolt; (M8x1.25x130-mm) | 1 |
| 16***61 | Core As | 1 |
144-2222 Condenser & Mtg Gp-Refrigerant
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 22 |
| 14***22 | Condenser & Mtg Group-Refrigerant | 1 |
| 14***26 | Screw-Flat Head; (6-20x0.75-In) | 4 |
183-4995 Console Gp-Front
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 22 |
| 14***26 | Screw-Flat Head; (6-20x0.75-In) | 4 |
| 15***15 | Louver As-Vent | 2 |
183-4996 Console Gp-Front
| 16***31 | Console Group-Side; -Lh-Air Conditioning | 1 |
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
| 18***96 | Console Group-Front | 1 |
185-3530 Console Gp-Operator
| 12***70 | Screw-Machine; (M6x1x40-mm) | 2 |
| 16***07 | Console-Storage | 1 |
| 17***83 | Locknut; (M4x0.7-Thd) | 4 |
185-3524 Console Gp-Operator -Rh
| 16***07 | Console-Storage | 1 |
| 17***83 | Locknut; (M4x0.7-Thd) | 4 |
| 18***97 | Console Group-Side; -Rh | 1 |
164-1388 Console Gp-Operator -Lh-Air Conditioning
| 16***88 | Console Group-Operator; -With Air Conditioner, Lh | 1 |
| 17***83 | Locknut; (M4x0.7-Thd) | 4 |
| 18***98 | Console Group-Side; -Rh | 1 |
183-4998 Console Gp-Side
| 16***61 | Boot | 2 |
| 16***71 | Plate | 1 |
| 16***99 | Knob | 2 |
183-4997 Console Gp-Side
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 4 |
| 11***03 | Louver As | 1 |
| 16***78 | Clip | 7 |
164-1131 Console Gp-Side -Lh-Air Conditioning
| 16***31 | Console Group-Side; -Lh-Air Conditioning | 1 |
| 16***78 | Clip | 7 |
| 17***91 | Nut-Spring | 14 |
183-3150 Control Gp-Hydraulic Hand -Loader Single Tilt
| 10***05 | Plate As | 1 |
| 10***09 | Pin | 1 |
| 18***50 | Control Group-Hydraulic Hand; -Loader Auxiliary-Multipurpose Bucket | 1 |
164-1400 Control Gp-Hydraulic Hand
| 14***05 | Collar | 2 |
| 16***61 | Boot | 2 |
| 16***71 | Plate | 1 |
164-1420 Control Gp-Hydraulic Hand
| 16***61 | Boot | 2 |
| 16***71 | Plate | 1 |
| 16***99 | Knob | 2 |
164-1440 Control Gp-Hydraulic Hand
| 16***40 | Control Group-Hydraulic Hand | 2 |
183-3120 Control Gp-Hydraulic Hand -Loader Single Tilt
| 13***53 | Turnbuckle | 1 |
| 16***95 | Knob | 1 |
| 17***35 | Lock Pin | 1 |
164-1450 Control Gp-Hydraulic Hand -Kit
| 09***30 | Pin, Spring | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***91 | Nut-Jam; (3/4-16-Thd) | 1 |
106-2404 Control Gp-Hydraulic Lockout
| 10***04 | Control Group-Hydraulic Lockout | 1 |
| 10***33 | Seal | 1 |
| 13***16 | Film-Instruction; (Extendable Stick) | 1 |
164-1540 Control Gp-Hydraulic Pedal
| 10***33 | Seal | 1 |
| 16***40 | Control Group-Hydraulic Pedal | 1 |
| 16***44 | Support As | 1 |
164-1550 Control Gp-Hydraulic Pedal
| 15***80 | Steering Wheel Group | 1 |
| 16***40 | Panel As | 1 |
| 16***50 | Control Group-Hydraulic Pedal | 1 |
183-4897 Control Gp-Steering
| 03***57 | Wheel-Hand Steering | 1 |
| 16***40 | Panel As | 1 |
| 18***70 | Column As-Steer | 1 |
183-4898 Control Gp-Steering
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***91 | Nut-Jam; (3/4-16-Thd) | 1 |
| 16***13 | Plate | 1 |
164-1130 Control Gp-Transmission
| 11***89 | Retainer; (Stud) | 2 |
| 16***09 | Cover-Fuse | 1 |
| 16***30 | Control Group-Transmission | 1 |
183-4990 Cover Gp-Console
| 11***89 | Retainer; (Stud) | 5 |
| 16***08 | Cover | 1 |
| 16***51 | Fastener | 5 |
183-4991 Cover Gp-Console
| 11***77 | Screw-Pan Head; (8-32x12.7-mm) | 1 |
| 12***05 | Plate | 1 |
| 13***12 | Spring | 1 |
191-1784 Cover Gp-Console
| 16***37 | Cover | 1 |
| 19***84 | Cover Group-Console | 1 |
| 9X***38 | Washer; (7x19x2-mm Thk) | 12 |
186-0252 Cover Gp-Firewall
| 12***72 | Seal; (135-cm) | 0 |
| 18***52 | Cover Group-Firewall; -Lower | 1 |
| 19***03 | Plate | 1 |
198-0104 Cover Gp-Firewall
| 16***10 | Cover; (Parking Brake) | 1 |
| 19***04 | Cover Group-Firewall; -Upper | 1 |
| 9X***44 | Screw-Truss Head (M6x1x16mm); (M6x1x16-mm) | 2 |
185-3527 Cover Gp-Parking Brake
| 12***54 | Fastener; (Loop) (22cm) (X3) | 0 |
| 12***55 | Fastener-Hook; (18-cm Each) | 0 |
| 18***27 | Cover Group-Parking Brake | 1 |
198-1289 Cover Gp-Post
| 13***87 | Screw; (M4x0.7x12-mm) | 6 |
| 14***19 | Bracket | 2 |
| 14***55 | Seal; (478-cm) | 0 |
197-7564 Cover Gp-Post
| 16***56 | Cover; (Rh)(Post-Rh) | 1 |
| 19***64 | Cover Group-Post; -Rh | 1 |
| 20***03 | Cover-Access | 1 |
164-1062 Door Gp-Cab
| 16***43 | Duct As-Front | 1 |
| 16***62 | Door Group-Cab; -Lh | 1 |
| 16***98 | Boot | 1 |
164-1141 Duct Gp-Air -Standard Shift
| 16***44 | Duct As | 1 |
| 16***41 | Duct Group-Air; (Standard Shift) | 1 |
| 18***63 | Gasket | 1 |
164-1142 Duct Gp-Air -Powershift
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 8 |
| 14***26 | Screw-Flat Head; (6-20x0.75-In) | 2 |
| 15***15 | Louver As-Vent | 1 |
184-6576 Duct Gp-Cab Air
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 8 |
| 14***26 | Screw-Flat Head; (6-20x0.75-In) | 2 |
| 15***15 | Louver As-Vent | 1 |
184-6577 Duct Gp-Cab Air -Heater
| 18***77 | Duct Group-Cab Air; -Heater | 1 |
| 5P***16 | Washer; (Hard) (8.8x20.5x2mm Thk) | 4 |
| 6V***89 | Locknut; (M8x1.25-Thd) | 4 |
184-6575 Duct Gp-Cab Air -Heater
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 8 |
| 14***26 | Screw-Flat Head; (6-20x0.75-In) | 2 |
| 15***15 | Louver As-Vent | 1 |
185-3525 Fastener Gp-Operator Console -Front
| 18***50 | Floor Mat | 1 |
| 18***54 | Plate; (Lh) | 2 |
| 18***25 | Fastener Group-Operator Console; -Front | 1 |
180-5760 Floor Mat Gp
| 18***51 | Floor Mat | 1 |
| 18***54 | Plate; (Lh) | 2 |
| 18***60 | Floor Mat Group | 1 |
180-5761 Floor Mat Gp
| 18***54 | Plate; (Lh) | 2 |
| 18***58 | Floor Mat | 1 |
| 18***61 | Floor Mat Group | 1 |
180-5764 Floor Mat Gp
| 11***09 | Knob-Control | 1 |
| 12***12 | Screw-Pan Head; (8-16x0.32-In) | 2 |
| 13***32 | Screw; (8-18x.39 In) | 2 |
164-1030 Heater & Mtg Gp-Cab
| 16***30 | Heater & Mtg Group-Cab | 2 |
| 16***31 | Lines Group-Heater | 1 |
| 16***88 | Console Group-Operator; -With Air Conditioner, Lh | 1 |
193-4723 Heater Ar-Cab
| 11***09 | Knob-Control | 1 |
| 12***12 | Screw-Pan Head; (8-16x0.32-In) | 2 |
| 13***32 | Screw; (8-18x.39 In) | 2 |
185-1491 Heater Ar-Cab
| 16***31 | Lines Group-Heater | 1 |
| 16***45 | Heater Group-Cab | 1 |
| 18***64 | Floor Mat Group | 1 |
164-1045 Heater Gp-Cab
| 12***78 | Locknut; (M6x1-Thd) | 4 |
| 16***45 | Heater Group-Cab | 1 |
| 16***13 | Coil As-Heater | 1 |
170-0076 Heater Gp-Cab
| 09***15 | Lockwasher | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 16***25 | Horn As; (24-Volt, Low Tone) | 1 |
193-2342 Horn Gp-Electric -Rear
| 12***78 | Locknut; (M6x1-Thd) | 1 |
| 16***79 | Cable As | 1 |
| 16***83 | Lever As | 1 |
183-3887 Lever Gp-Governor
| 18***87 | Lever Group-Governor | 1 |
| 3E***21 | Clip | 4 |
| 5D***26 | Clamp-Band; (9/16 To 1 1/16) | 8 |
164-1031 Lines Gp-Heater
| 10***93 | Hose As | 1 |
| 10***94 | Hose As | 1 |
| 11***61 | Plate-Instruction; (Air Conditioner Lines) | 1 |
164-1033 Lines Gp-Heater & Air Cond
| 10***93 | Hose As | 1 |
| 10***94 | Hose As | 1 |
| 11***17 | Fitting As-Air Conditioner | 1 |
189-3823 Lock Gp-Hydraulic Foot Control
| 12***51 | Bracket | 2 |
| 12***52 | Mirror As; (Rh) | 1 |
| 12***53 | Mirror As; (Lh) | 1 |
164-1055 Mirror Gp-Rear View
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 14***34 | Gasket; (Indicator Module) | 1 |
| 16***55 | Mirror Group-Rear View | 1 |
122-2054 Mirror Gp-Rear View
| 12***54 | Mirror Group-Rear View | 1 |
| 12***20 | Mirror As | 2 |
| 15***05 | Bracket & Mounting As; (Lh) | 1 |
144-9930 Module Gp-Warning Indicator -With Alarm, Function Lights
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 14***30 | Module Group-Warning Indicator; -With Alarm, Function Lights | 1 |
| 14***34 | Gasket; (Indicator Module) | 1 |
144-9931 Module Gp-Warning Indicator
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 14***31 | Module Group-Warning Indicator; -Without Alarm | 1 |
| 15***91 | Motor Group-Window Wiper; (Front) | 1 |
186-2589 Motor Gp-Window Wiper -Front
| 16***83 | Panel As-Instrument | 1 |
| 18***89 | Motor Group-Window Wiper; -Front | 1 |
| 9X***45 | Screw-Truss Head (M6x1x20mm); (M6x1x20-mm) | 10 |
190-7374 Mounting Gp-Instrument Panel
| 16***98 | Knob | 2 |
| 19***74 | Mounting Group-Instrument Panel; -Side Console | 1 |
| 20***98 | Plate | 1 |
183-6078 Mounting Gp-Stabilizer Control
| 16***78 | Plate | 2 |
| 16***79 | Panel As | 1 |
| 18***78 | Mounting Group-Stabilizer Control | 1 |
184-7898 Panel Gp-Instrument -Front Console
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 4 |
| 12***78 | Locknut; (M6x1-Thd) | 1 |
| 16***54 | Kit-Service; (Pedal) | 1 |
164-1078 Pedal Gp-Governor
| 16***78 | Pedal Group-Governor | 1 |
| 19***25 | Washer-Hard; (13.5x18x4-mm Thk) | 1 |
| 3E***04 | Bolt; (M12x1.75x45-mm) | 1 |
190-8919 Seat Belt Gp
| 10***81 | Bolt-Socket Head; (M8x1.25x20-mm) | 2 |
| 12***80 | Locknut; (M12x1.75-Thd) | 2 |
| 13***40 | Locknut; (M8x1.25-Thd) | 8 |
190-8918 Seat Belt Gp
| 19***18 | Seat Belt Group; -Retractable, 2-In | 1 |
| 19***25 | Washer-Hard; (13.5x18x4-mm Thk) | 1 |
| 3E***04 | Bolt; (M12x1.75x45-mm) | 1 |
164-1296 Seat Gp
| 10***81 | Bolt-Socket Head; (M8x1.25x20-mm) | 2 |
| 12***80 | Locknut; (M12x1.75-Thd) | 2 |
| 16***83 | Washer; (19.8x31.8x1.6-mm Thk) | 3 |
164-1210 Seat Gp
| 12***80 | Locknut; (M12x1.75-Thd) | 2 |
| 13***40 | Locknut; (M8x1.25-Thd) | 8 |
| 16***10 | Seat Group; -Vinyl | 1 |
273-6036 Seat Gp -Cloth
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 4 |
| 09***78 | Pin-Spring | 2 |
| 12***77 | Shaft-Pivot | 1 |
164-1202 Seat Gp-Suspension
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 4 |
| 09***78 | Pin-Spring | 2 |
| 12***77 | Shaft-Pivot | 1 |
206-1792 Seat Gp-Suspension -Cloth
| 11***42 | Fastener | 34 |
| 12***80 | Locknut; (M12x1.75-Thd) | 1 |
| 13***43 | Screw-Button Head; (3/8-16x0.625-In) | 1 |
180-5771 Seat Gp-Suspension
| 16***06 | Seat Group-Suspension | 1 |
| 18***71 | Seat Group-Suspension; -Standard, Vinyl | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 1 |
164-1206 Seat Gp-Suspension
| 16***06 | Seat Group-Suspension | 1 |
| 20***92 | Seat Group-Suspension; -Cloth | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 1 |
180-5770 Seat Gp-Suspension
| 16***02 | Seat Group-Suspension; -Vinyl | 1 |
| 18***70 | Seat Group-Suspension; -Standard, Cloth | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 1 |
180-5775 Seat Gp-Suspension
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
| 16***47 | Bracket As; (Rh) | 1 |
| 16***61 | Bracket As; (Lh) | 1 |
164-1207 Suspension Gp-Seat -Air
| 09***82 | Nut Self-Locking; (M8x1.25 Thd) | 2 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
273-6372 Suspension Gp-Seat
| 27***72 | Suspension Group-Seat; -Vinyl | 1 |
| 8T***71 | Capscrew; (Hex Hd) (M6 X 1.00 X 12mm, G10.9, Z) | 4 |
| 9R***03 | Plate | 2 |
108-8251 Visor Gp-Cab
| 10***51 | Visor Group-Cab | 1 |
| 11***50 | Plate | 1 |
| 11***23 | Cap | 1 |
167-8187 Washer Gp-Window
| 10***08 | Handle; (Rh) | 1 |
| 12***42 | Retainer; (Mount) | 6 |
| 12***45 | Washer; (13x40x3-mm Thk) | 8 |
164-1059 Window Gp-Cab -Rh
| 10***08 | Handle; (Rh) | 1 |
| 12***42 | Retainer; (Mount) | 6 |
| 12***45 | Washer; (13x40x3-mm Thk) | 8 |
164-1060 Window Gp-Cab -Lh
| 11***02 | Knob | 2 |
| 11***49 | Cap | 2 |
| 12***43 | Seal | 1 |
164-1355 Window Gp-Cab
| 10***08 | Handle; (Rh) | 1 |
| 12***42 | Retainer; (Mount) | 5 |
| 12***43 | Spacer; (16-mm Thk) | 2 |
164-1074 Window Gp-Door -Lh
| 10***45 | Blade As-Wiper; (600-mm) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 13***49 | Spacer; (7.4x12.7x24-mm Thk)(12.7mm Dia) | 2 |
174-2024 Wiper Gp-Window
| 17***24 | Wiper Group-Window | 1 |
| 18***73 | Film Group | 1 |
Power Train
6d-0337 Valve Gp-Tire
| 14***21 | Nut-Hex Flange; (3/4-16-Thd) | 16 |
| 21***15 | Wheel & Tire Group; -Lh | 1 |
| 21***16 | Wheel & Tire Group; -Rh | 1 |
114-0165 Axle & Mtg Gp-Rear
| 00***01 | Cone-Bearing | 2 |
| 00***02 | Cone-Roller Bearing | 3 |
| 03***26 | Cup-Bearing | 2 |
154-5472 Axle Gp-Drive & Steering -Front
| 11***29 | Pin | 1 |
| 15***72 | Axle Group-Drive & Steering; -Front | 2 |
| 16***96 | Washer-Thrust; (55.5x100.5x5-mm Thk)(5mm) | 2 |
186-3462 Axle Gp-Drive & Steering
| 03***57 | Cone-Bearing; (Tapered Roller) | 2 |
| 0T***18 | Bolt Strap To Front Cover | 2 |
| 11***47 | Flange | 1 |
156-2857 Axle Gp-Rear
| 10***67 | Spring | 1 |
| 15***57 | Axle Group-Rear | 1 |
| 19***13 | Rod As | 1 |
191-9114 Control Gp-Differential Lock
| 11***06 | Plate-Converter Drive | 1 |
| 11***13 | Plate-Converter Reinforcement | 1 |
| 19***14 | Control Group-Differential Lock | 1 |
111-7907 Drive Gp-Flexible Coupling
| 10***66 | Gauge As-Oil Level (Dipstick); (Transmission) | 1 |
| 11***07 | Drive Group-Flexible Coupling | 1 |
| 11***19 | Bracket As | 1 |
136-3110 Filler Gp-Power Train Oil -2-Wheel Drive
| 11***19 | Bracket As | 1 |
| 13***10 | Filler Group-Power Train Oil; -2-Wheel Drive | 1 |
| 13***78 | Gauge As-Oil Level (Dipstick); (Transmission) | 1 |
8y-7483 Filler Gp-Power Train Oil -All Wheel Drive
| 10***66 | Gauge As-Oil Level (Dipstick); (Transmission) | 1 |
| 11***19 | Bracket As | 1 |
| 12***51 | Tube As | 1 |
138-7381 Filler Gp-Power Train Oil -Power Shift
| 12***63 | Plug-Lockout | 1 |
| 12***69 | Lockwasher | 1 |
| 13***81 | Filler Group-Power Train Oil; -Power Shift | 1 |
130-8149 Lockout Gp-Fourth Gear
| 11***51 | Shaft Group-Drive; -Rear | 1 |
| 13***49 | Lockout Group-Fourth Gear | 1 |
| 16***18 | Control Group-Service Brake | 1 |
185-1490 Power Train Ar
| 11***53 | Shaft Group-Drive; -Front | 1 |
| 14***82 | Mounting Group-Engine & Xmsn | 1 |
| 14***86 | Lines Group-Power Train Cooler | 1 |
226-2236 Power Train Ar
| 10***26 | Bolt; (M24x19.1-mm) | 4 |
| 11***50 | Shaft As-Main | 1 |
| 11***87 | Kit-Spider & Bearing; (Drive Shaft) | 2 |
226-1601 Power Train Ar
| 13***10 | Filler Group-Power Train Oil; -2-Wheel Drive | 1 |
| 14***82 | Mounting Group-Engine & Xmsn | 1 |
| 14***86 | Lines Group-Power Train Cooler | 1 |
185-6399 Power Train Ar -Standard Shift-Two Wheel Drive
| 11***53 | Shaft Group-Drive; -Front | 1 |
| 14***82 | Mounting Group-Engine & Xmsn | 1 |
| 14***86 | Lines Group-Power Train Cooler | 1 |
185-1489 Power Train Ar
| 13***10 | Filler Group-Power Train Oil; -2-Wheel Drive | 1 |
| 14***82 | Mounting Group-Engine & Xmsn | 1 |
| 14***86 | Lines Group-Power Train Cooler | 1 |
185-6398 Power Train Ar
| 13***10 | Filler Group-Power Train Oil; -2-Wheel Drive | 1 |
| 14***82 | Mounting Group-Engine & Xmsn | 1 |
| 14***86 | Lines Group-Power Train Cooler | 1 |
226-1604 Power Train Ar
| 13***59 | Shaft Group-Drive; -Front-Powershift | 1 |
| 13***81 | Filler Group-Power Train Oil; -Power Shift | 1 |
| 14***88 | Mounting Group-Engine & Xmsn; -Power Shift | 1 |
184-7970 Power Train Ar -2 Wheel Steer
| 11***53 | Shaft Group-Drive; -Front | 1 |
| 14***82 | Mounting Group-Engine & Xmsn | 1 |
| 14***86 | Lines Group-Power Train Cooler | 1 |
113-1153 Shaft Gp-Drive -Front
| 11***53 | Shaft Group-Drive; -Front | 1 |
| 13***26 | Yoke | 1 |
| 13***27 | Spider | 2 |
113-1151 Shaft Gp-Drive -Rear
| 10***26 | Bolt; (M24x19.1-mm) | 8 |
| 11***49 | Shaft As-Drive-Front | 1 |
| 11***51 | Shaft Group-Drive; -Rear | 1 |
130-3014 Shaft Gp-Drive -Lh
| 10***26 | Bolt; (M24x19.1-mm) | 8 |
| 11***87 | Kit-Spider & Bearing; (Drive Shaft) | 2 |
| 13***14 | Shaft Group-Drive; -Lh | 1 |
138-4559 Shaft Gp-Drive -Front-Powershift
| 11***21 | Support As; (Rh) | 1 |
| 13***59 | Shaft Group-Drive; -Front-Powershift | 1 |
| 13***37 | Support As; (Lh) | 1 |
130-3013 Shaft Gp-Drive -Rh
| 13***13 | Shaft Group-Drive; -Rh | 1 |
| 13***26 | Yoke | 1 |
| 13***27 | Spider | 2 |
202-6007 Transmission & Mounting Gp -Two Wheel Drive-Standard Shift
| 11***21 | Support As; (Rh) | 1 |
| 13***37 | Support As; (Lh) | 1 |
| 20***62 | Transmission Group-Direct Drive; -All Wheel Drive | 1 |
202-6008 Transmission & Mounting Gp -All Wheel Drive-Standard Shift
| 11***21 | Support As; (Rh) | 1 |
| 13***37 | Support As; (Lh) | 1 |
| 19***44 | Transmission Group-Direct Drive; -All Wheel Drive | 1 |
202-7431 Transmission & Mounting Gp -All Wheel Drive
| 11***21 | Support As; (Rh) | 1 |
| 13***38 | Support As; (Lh) | 1 |
| 19***49 | Transmission Group-Power Shift; -All Wheel Drive | 1 |
202-7432 Transmission & Mounting Gp -All Wheel Drive
| 11***07 | Drive Group-Flexible Coupling | 1 |
| 11***40 | Filter-Oil; (Standard Efficiency)(Transmission) | 1 |
| 14***93 | Torque Converter As | 1 |
185-7586 Transmission Ar-Direct Drive -All Wheel Drive
| 11***07 | Drive Group-Flexible Coupling | 1 |
| 11***40 | Filter-Oil; (Standard Efficiency)(Transmission) | 1 |
| 18***86 | Transmission Ar-Direct Drive; -All Wheel Drive | 1 |
185-7585 Transmission Ar-Direct Drive -Two Wheel Drive
| 11***07 | Drive Group-Flexible Coupling | 1 |
| 11***40 | Filter-Oil; (Standard Efficiency)(Transmission) | 1 |
| 14***93 | Torque Converter As | 1 |
185-7587 Transmission Ar-Power Shift -All Wheel Drive
| 00***69 | Cup-Roller Bearing | 2 |
| 00***71 | Cone-Bearing | 2 |
| 01***45 | Ball | 3 |
192-0842 Transmission Gp-Direct Drive -Two Wheel Drive
| 00***69 | Cup-Roller Bearing | 2 |
| 00***71 | Cone-Bearing | 2 |
| 01***45 | Ball | 3 |
201-8561 Transmission Gp-Direct Drive -All Wheel Drive
| 00***69 | Cup-Roller Bearing | 2 |
| 00***71 | Cone-Bearing | 2 |
| 01***45 | Ball | 3 |
201-8562 Transmission Gp-Direct Drive -All Wheel Drive
| 00***62 | Seal-O-Ring; (63.17mm Id) | 2 |
| 09***27 | Ring-Retaining | 1 |
| 09***28 | Ring-Retaining; (External) | 1 |
192-0844 Transmission Gp-Direct Drive
| 00***69 | Cup-Roller Bearing | 2 |
| 00***71 | Cone-Bearing | 2 |
| 01***45 | Ball | 3 |
192-0849 Transmission Gp-Power Shift -All Wheel Drive
| 10***86 | Seal-O-Ring | 1 |
| 19***49 | Transmission Group-Power Shift; -All Wheel Drive | 1 |
| 6V***78 | Seal-O-Ring; (25.12mm Id) | 1 |
147-0209 Valve Gp-Relief
| 10***07 | Kit-Connecting Plug; (2-Pin)(Electronic Control) | 1 |
| 12***35 | Kit-Seal | 1 |
| 12***72 | Cartridge As | 1 |
148-8986 Valve Gp-Solenoid
| 06***39 | Seal-O-Ring | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
121-4036 Valve Gp-Solenoid
| 06***39 | Seal-O-Ring | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
142-1468 Valve Gp-Solenoid
| 06***39 | Seal-O-Ring | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
148-8988 Valve Gp-Solenoid
| 06***39 | Seal-O-Ring | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
223-8181 Valve Gp-Solenoid
| 22***81 | Valve Group-Solenoid; -Transmission | 1 |
| 2D***28 | Core-Valve | 1 |
| 2D***29 | Grommet | 1 |
216-9117 Wheel & Tire Gp -Rear
| 21***12 | Tire; (18.4-26) | 1 |
| 21***17 | Wheel & Tire Group; -Rear | 1 |
| 27***50 | Wheel As; (Rear) | 1 |
216-9124 Wheel & Tire Gp -Lh
| 21***13 | Tire; (16.9-28) | 1 |
| 21***24 | Wheel & Tire Group; -Lh | 1 |
| 27***42 | Wheel As; (Rear)(Rear) | 1 |
216-9115 Wheel & Tire Gp -Lh
| 13***86 | Wheel As; (Front) | 1 |
| 21***11 | Tire; (12.5/80-18) | 1 |
| 21***15 | Wheel & Tire Group; -Lh | 1 |
216-9119 Wheel & Tire Gp -Rh
| 14***21 | Nut-Hex Flange; (3/4-16-Thd) | 16 |
| 21***19 | Wheel & Tire Group; -Rh | 1 |
| 21***24 | Wheel & Tire Group; -Lh | 1 |
216-9114 Wheel & Tire Gp -Front
| 13***86 | Wheel As; (Front) | 1 |
| 21***11 | Tire; (12.5/80-18) | 1 |
| 21***14 | Wheel & Tire Group; -Front | 1 |
216-9116 Wheel & Tire Gp -Rh
| 14***21 | Nut-Hex Flange; (3/4-16-Thd) | 16 |
| 21***16 | Wheel & Tire Group; -Rh | 1 |
| 21***18 | Wheel & Tire Group; -Lh | 1 |
216-9118 Wheel & Tire Gp -Lh
| 21***12 | Tire; (18.4-26) | 1 |
| 21***18 | Wheel & Tire Group; -Lh | 1 |
| 27***50 | Wheel As; (Rear) | 1 |
216-9123 Wheel & Tire Gp -Rear
| 21***13 | Tire; (16.9-28) | 1 |
| 21***23 | Wheel & Tire Group; -Rear | 1 |
| 27***42 | Wheel As; (Rear)(Rear) | 1 |
216-9125 Wheel & Tire Gp -Rh
| 12***64 | Bracket | 1 |
| 13***82 | Bracket | 1 |
| 16***13 | Kit-Cam; (Counterclockwise)(Parking Brake) | 1 |
Service Equipment And Supplies
185-7752 Film Gp
| 10***03 | Fastener | 8 |
| 18***52 | Film Group | 1 |
| 18***71 | Film; (424d, Rh) | 1 |
186-6373 Film Gp
| 11***42 | Chock Group-Wheel | 2 |
| 13***52 | Plate | 2 |
| 18***73 | Film Group | 1 |
113-0018 Installation Ar-Wheel Chock
| 11***18 | Installation Ar-Wheel Chock | 1 |
| 12***86 | Plate | 1 |
175-7877 Link Gp-Shipping
| 17***77 | Link Group-Shipping; -For Shipping Only | 1 |
| 5P***00 | Key Total 2 Pieces Per Unit; (Literature Compartment) | 1 |
| 5P***02 | Padlock Group; (Includes: Battery Compartments, Platform Compartments, Radiator Access Door, Firewall Doors) | 2 |
134-8204 Lock Gp-Vandalism
| 10***27 | Film-Identification; (20-Km/H)(20 Kph) | 4 |
| 13***10 | Film-Instruction; (Wheel Chock) | 1 |
| 13***04 | Lock Group-Vandalism | 1 |
124-5482 Plate & Film Ar
| 10***33 | Film-Identification; (Hydraulic Oil) | 1 |
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 12***82 | Plate & Film Ar | 1 |
185-7770 Plate & Film Gp -Greek
| 18***70 | Plate & Film Group; -Greek | 1 |
| 19***18 | Film-Warning; (Battery) | 1 |
| 19***08 | Film-Notice; (Engine Start) | 1 |
198-0107 Plate & Film Gp -Turkish
| 10***20 | Plate | 1 |
| 10***21 | Bracket As | 1 |
| 10***22 | Magnet As | 1 |
185-7769 Plate & Film Gp -Dutch
| 10***74 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 12***70 | Plate-Warning; (Secure Extendable Stick) | 2 |
| 13***95 | Film-Warning; (Lift Arm Brace, Parallel Lift) | 1 |
185-7768 Plate & Film Gp -Polish
| 10***75 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 12***71 | Plate-Warning; (Secure Extendable Stick) | 2 |
| 13***97 | Film-Warning; (Lift Arm Brace, Parallel Lift) | 1 |
185-7756 Plate & Film Gp -French
| 10***69 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 12***65 | Plate-Warning; (Secure Extendable Stick) | 2 |
| 13***91 | Film-Warning; (Lift Arm Brace, Parallel Lift) | 1 |
185-7761 Plate & Film Gp -Danish
| 10***76 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 12***72 | Plate-Warning; (Secure Extendable Stick) | 2 |
| 13***98 | Film-Warning; (Lift Arm Brace, Parallel Lift) | 1 |
185-7759 Plate & Film Gp -German
| 10***72 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 12***68 | Plate-Warning; (Secure Extendable Stick) | 2 |
| 13***11 | Film-Warning; (Lift Arm Brace, Parallel Lift) | 1 |
185-7758 Plate & Film Gp -Portuguese
| 10***71 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 12***67 | Plate-Warning; (Secure Extendable Stick) | 2 |
| 13***93 | Film-Warning; (Lift Arm Brace, Parallel Lift) | 1 |
185-7766 Plate & Film Gp -Czechoslovakian
| 14***96 | Plate-Warning; (Secure Extendable Stick) | 2 |
| 14***97 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 14***99 | Film-Warning; (Lift Arm Brace, Parallel Lift) | 1 |
185-7764 Plate & Film Gp
| 12***42 | Film-Notice; (Engine Starting) | 1 |
| 12***74 | Plate-Warning; (Secure Extendable Stick) | 2 |
| 12***83 | Film-Warning; (Jump Start, Read Omm) | 1 |
185-7757 Plate & Film Gp -Spanish
| 10***70 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 12***66 | Plate-Warning; (Secure Extendable Stick) | 2 |
| 13***92 | Film-Warning; (Lift Arm Brace, Parallel Lift)(Parallel Lift) | 1 |
185-7751 Plate & Film Gp
| 10***68 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 12***64 | Plate-Warning; (Secure Extendable Stick) | 2 |
| 13***90 | Film-Warning; (Lift Arm Brace, Parallel Lift) | 1 |
185-7760 Plate & Film Gp -Italian
| 10***73 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 12***69 | Plate-Warning; (Secure Extendable Stick) | 2 |
| 13***94 | Film-Warning; (Lift Arm Brace, Parallel Lift) | 1 |
185-7762 Plate & Film Gp -Arabic
| 10***77 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 10***19 | Film-Notice; (Engine Starting) | 1 |
| 12***73 | Plate-Warning; (Secure Extendable Stick) | 2 |
185-7763 Plate & Film Gp -Swedish
| 17***13 | Film-Warning-Notice; (Qcplr, Stg Aid, Read Omm) | 1 |
| 18***63 | Plate & Film Group; -Swedish | 1 |
| 19***38 | Plate-Warning-Rops/Fops | 1 |
185-7138 Plate & Film Gp
| 18***38 | Plate & Film Group | 1 |
| 18***73 | Film Group | 1 |
185-7765 Plate & Film Gp -Finnish
| 14***60 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 14***61 | Film-Warning; (Lift Arm Brace, Parallel Lift) | 1 |
| 14***64 | Plate-Warning; (Secure Extendable Stick) | 2 |
185-7767 Plate & Film Gp -Hebrew
| 15***84 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 15***85 | Film-Warning; (Lift Arm Brace, Parallel Lift) | 1 |
| 15***86 | Film-Warning; (Lift Arm Brace, Single Tilt) | 1 |
198-0106 Plate & Film Gp -Hungarian
| 19***21 | Film-Warning; (Battery) | 1 |
| 19***06 | Plate & Film Group; -Hungarian | 1 |
| 19***10 | Film-Notice; (Engine Starting) | 1 |
198-0105 Plate & Film Gp -Norwegian
| 19***27 | Film-Warning; (Battery) | 1 |
| 19***05 | Plate & Film Group; -Norwegian | 1 |
| 19***09 | Film-Notice; (Engine Start) | 1 |
101-4419 Plate As-Side Reflective
| 10***19 | Plate As-Side Reflective | 1 |
Steering System
154-5465 Axle Gp-Front
| 15***49 | Head | 2 |
| 15***65 | Axle Group-Front | 1 |
| 16***95 | Seal As | 1 |
178-7190 Cylinder Gp-Steering
| 17***90 | Cylinder Group-Steering | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 1 |
| 8T***24 | Washer-To Assemble Valve As And Plates | 1 |
167-4235 Cylinder Gp-Steering -Power Shift
| 09***28 | Ring-Retaining; (External) | 1 |
| 13***82 | Cylinder | 1 |
| 13***83 | Rod | 1 |
153-7369 Knob Gp-Steering
| 03***79 | Nipple; (Hose) | 1 |
| 11***42 | Hose As | 1 |
| 11***59 | Hose As | 1 |
188-8586 Lines Gp-Steering
| 14***15 | Sleeve-Steering Lock | 1 |
| 14***18 | Pin | 1 |
| 14***19 | Padlock | 1 |
186-4119 Lines Gp-Steering
| 03***79 | Nipple; (Hose) | 1 |
| 11***42 | Hose As | 1 |
| 11***59 | Hose As | 1 |
149-4098 Lock Gp-Steering Cylinder
| 14***98 | Lock Group-Steering Cylinder; -Anti-Theft, 2-Wheel Drive | 1 |
| 14***16 | Sleeve-Steering Lock | 1 |
| 14***18 | Pin | 1 |
149-4099 Lock Gp-Steering Cylinder
| 11***75 | Spring | 2 |
| 11***32 | Valve As-Check | 1 |
| 11***80 | Cap | 1 |
163-0059 Pump Gp-Metering -Hmu
| 14***77 | Knob; (Steering Column Tilt) | 1 |
| 14***80 | Kit-Gas Spring | 1 |
| 14***82 | Kit-Tilt Lever | 1 |
172-3368 Steering Column Gp
| 10***32 | Boot | 1 |
| 10***34 | Ring | 1 |
| 10***36 | Ring | 1 |
117-8537 Steering Gp-Hydraulic
| 11***37 | Steering Group-Hydraulic | 1 |
| 14***91 | Steering Wheel As | 1 |
| 15***68 | Plug | 1 |
153-9580 Steering Wheel Gp
| 10***54 | Spring | 1 |
| 15***80 | Steering Wheel Group | 1 |
| 18***57 | Seat As | 1 |
188-7471 Valve Gp-Priority -Steering
| 11***42 | Door Group-Battery | 1 |
| 11***54 | Tread | 1 |
| 16***76 | Step As | 1 |
Work Tools
111-8635 Bucket Ar-Multipurpose
| 10***87 | Film-Identification; (Bucket Level) | 1 |
| 11***34 | Bucket Ar-Multipurpose | 1 |
| 11***35 | Bucket Ar-Multipurpose | 1 |
112-0938 Bucket Ar-Multipurpose
| 10***10 | Fork Group; Fork Gp | 1 |
| 11***38 | Bucket Ar-Multipurpose; Bucket Ar-Multipurpose | 1 |
| 11***78 | Bucket Group-Multipurpose | 1 |
111-8636 Bucket Ar-Multipurpose
| 10***12 | Fork As | 2 |
| 10***87 | Film-Identification; (Bucket Level) | 1 |
| 11***35 | Bucket Ar-Multipurpose | 1 |
112-0941 Bucket Ar-Multipurpose
| 11***41 | Bucket Ar-Multipurpose | 1 |
| 9R***11 | Bearing-Sleeve | 2 |
| 9R***36 | Bracket As-Lift; (Rh) | 2 |
111-8637 Bucket Ar-Multipurpose
| 10***36 | Bucket Group-Multipurpose | 1 |
| 11***37 | Bucket Ar-Multipurpose | 1 |
| 18***39 | Cylinder Group-Multipurpose Bukt | 2 |
112-0939 Bucket Ar-Multipurpose
| 10***87 | Film-Identification; (Bucket Level) | 1 |
| 11***38 | Bucket Ar-Multipurpose; Bucket Ar-Multipurpose | 1 |
| 11***39 | Bucket Ar-Multipurpose; Bucket Ar-Multipurpose | 1 |
112-0940 Bucket Ar-Multipurpose
| 10***87 | Film-Identification; (Bucket Level) | 1 |
| 11***39 | Bucket Ar-Multipurpose; Bucket Ar-Multipurpose | 1 |
| 11***40 | Bucket Ar-Multipurpose | 1 |
111-8634 Bucket Ar-Multipurpose
| 10***64 | Bucket Group-Multipurpose | 1 |
| 10***10 | Fork Group; Fork Gp | 1 |
| 11***34 | Bucket Ar-Multipurpose | 1 |
9r-5201 Bucket As-General Purpose
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 19***96 | Bucket As-General Purpose | 1 |
9r-5989 Bucket Gp-General Purpose
| 9R***01 | Bucket As-Loader | 1 |
| 9R***66 | Tooth Group-Uni | 1 |
| 9R***89 | Bucket As-Loader | 1 |
108-3036 Bucket Gp-Multipurpose
| 10***36 | Bucket Group-Multipurpose | 1 |
| 11***77 | Bulldozer As | 1 |
| 25***46 | Clam As-Multipurpose Bucket | 1 |
104-3965 Bucket Gp-Multipurpose
| 10***65 | Bucket Group-Multipurpose | 1 |
| 10***37 | Bulldozer As | 1 |
| 25***46 | Clam As-Multipurpose Bucket | 1 |
104-3964 Bucket Gp-Multipurpose
| 10***64 | Bucket Group-Multipurpose | 1 |
| 10***67 | Bulldozer As | 1 |
| 25***51 | Clam As-Multipurpose Bucket | 1 |
112-1778 Bucket Gp-Multipurpose
| 10***67 | Bulldozer As | 1 |
| 10***13 | Bracket As | 1 |
| 10***14 | Bracket | 2 |
112-0942 Fork Gp
| 10***09 | Guard Group-Bucket | 1 |
| 10***15 | Film; (Reflector) | 1 |
| 11***42 | Fork Group | 1 |
104-6310 Fork Gp
| 10***10 | Fork Group; Fork Gp | 2 |
| 10***87 | Mounting Group-Fork | 1 |
9r-5202 Bucket As-General Purpose
| 19***97 | Bucket As | 1 |
| 9R***11 | Bearing-Sleeve | 4 |
| 9R***76 | Edge | 2 |
190-7596 Bucket As-General Purpose
| 12***78 | Edge | 1 |
| 15***02 | Bracket As; (Lh) | 1 |
| 15***03 | Bracket As; (Rh) | 1 |
9r-5988 Bucket As-General Purpose
| 9R***11 | Bearing-Sleeve | 2 |
| 9R***36 | Bracket As-Lift; (Rh) | 2 |
| 9R***43 | Bracket As-Lift; (Rh) | 2 |
197-5076 Bucket As-Hoe -High Capacity
| 13***82 | Edge; (Center) | 1 |
| 13***84 | Edge; (Lh) | 1 |
| 13***85 | Edge; (Rh) | 1 |
192-2825 Bucket As-Hoe -Ditch Cleaning
| 19***59 | Bracket As | 2 |
| 19***63 | Plate; (Torque) | 1 |
| 19***67 | Edge-Cutting | 1 |
197-5066 Bucket As-Hoe
| 13***90 | Edge | 1 |
| 15***02 | Bracket As; (Lh) | 1 |
| 15***03 | Bracket As; (Rh) | 1 |
198-4533 Bucket As-Hoe
| 19***33 | Bucket As-Hoe | 1 |
| 19***53 | Edge | 1 |
| 4T***04 | Adapter | 5 |
197-5081 Bucket As-Hoe
| 19***81 | Bucket As-Hoe | 1 |
| 19***21 | Edge | 1 |
| 4T***04 | Adapter | 4 |
198-8574 Bucket As-Hoe
| 19***54 | Edge | 1 |
| 19***74 | Bucket As-Hoe | 1 |
| 4T***04 | Adapter | 5 |
198-4539 Bucket As-Hoe
| 16***30 | Plate-Identification; (Cat) | 2 |
| 19***39 | Bucket As-Hoe | 1 |
| 20***21 | Edge | 1 |
200-2202 Bucket As-Hoe
| 16***30 | Plate-Identification; (Cat) | 2 |
| 20***02 | Bucket As-Hoe | 1 |
| 21***98 | Edge-Cutting | 1 |
191-9555 Bucket As-Hoe -Ditch Cleaning
| 13***66 | Edge-Cutting | 1 |
| 19***53 | Plate; (Torque) | 1 |
| 19***55 | Bucket As-Hoe; -Ditch Cleaning | 1 |
198-8572 Bucket As-Hoe
| 19***53 | Edge | 1 |
| 19***72 | Bucket As-Hoe | 1 |
| 4T***04 | Adapter | 5 |
197-5077 Bucket As-Hoe -High Capacity
| 13***46 | Edge-Cutting | 1 |
| 15***02 | Bracket As; (Lh) | 1 |
| 15***03 | Bracket As; (Rh) | 1 |
198-8578 Bucket As-Hoe
| 15***55 | Edge | 1 |
| 19***78 | Bucket As-Hoe | 1 |
151-7824 Bucket As-Hoe -Heavy-Duty
| 13***66 | Edge-Cutting | 1 |
| 15***24 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 19***53 | Plate; (Torque) | 1 |
151-7821 Bucket As-Hoe
| 12***94 | Edge | 1 |
| 15***21 | Bucket As-Hoe; -Heavy Duty | 1 |
| 15***02 | Bracket As; (Lh) | 1 |
197-5063 Bucket As-Hoe
| 13***87 | Edge | 1 |
| 15***02 | Bracket As; (Lh) | 1 |
| 15***03 | Bracket As; (Rh) | 1 |
151-7809 Bucket As-Hoe
| 12***94 | Edge | 1 |
| 15***09 | Bucket As-Hoe | 1 |
| 15***02 | Bracket As; (Lh) | 1 |
197-5071 Bucket As-Hoe -Heavy Duty
| 13***81 | Edge; (Center) | 1 |
| 13***84 | Edge; (Lh) | 1 |
| 13***85 | Edge; (Rh) | 1 |
151-7823 Bucket As-Hoe -Heavy-Duty
| 13***57 | Edge | 1 |
| 15***23 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 15***02 | Bracket As; (Lh) | 1 |
197-5073 Bucket As-Hoe -Heavy Duty
| 13***79 | Edge | 1 |
| 13***84 | Edge; (Lh) | 1 |
| 13***85 | Edge; (Rh) | 1 |
197-5065 Bucket As-Hoe
| 13***89 | Edge | 1 |
| 15***02 | Bracket As; (Lh) | 1 |
| 15***03 | Bracket As; (Rh) | 1 |
200-2198 Bucket As-Hoe
| 12***78 | Edge | 1 |
| 20***98 | Bucket As-Hoe | 1 |
| 20***00 | Plate | 2 |
151-7810 Bucket As-Hoe
| 13***17 | Edge | 1 |
| 15***10 | Bucket As-Hoe | 1 |
| 15***02 | Bracket As; (Lh) | 1 |
192-2826 Bucket As-Hoe -Ditch Cleaning
| 15***29 | Bracket As; (Lh) | 1 |
| 15***30 | Bracket As; (Rh) | 1 |
| 15***57 | Bearing-Sleeve | 2 |
198-8568 Bucket As-Hoe
| 19***52 | Edge | 1 |
| 19***68 | Bucket As-Hoe | 1 |
| 4T***04 | Adapter | 3 |
197-5069 Bucket As-Hoe -Heavy Duty
| 13***79 | Edge | 1 |
| 13***84 | Edge; (Lh) | 1 |
| 13***85 | Edge; (Rh) | 1 |
197-5064 Bucket As-Hoe
| 13***88 | Edge | 1 |
| 15***02 | Bracket As; (Lh) | 1 |
| 15***03 | Bracket As; (Rh) | 1 |
198-8570 Bucket As-Hoe
| 19***21 | Edge | 1 |
| 19***70 | Bucket As-Hoe | 1 |
| 4T***04 | Adapter | 4 |
197-5072 Bucket As-Hoe -Heavy Duty
| 13***82 | Edge; (Center) | 1 |
| 13***84 | Edge; (Lh) | 1 |
| 13***85 | Edge; (Rh) | 1 |
198-4531 Bucket As-Hoe
| 19***31 | Bucket As-Hoe | 1 |
| 19***52 | Edge | 1 |
| 4T***04 | Adapter | 3 |
198-4535 Bucket As-Hoe
| 19***35 | Bucket As-Hoe | 1 |
| 19***54 | Edge | 1 |
| 4T***04 | Adapter | 5 |
192-0661 Bucket As-Hoe -Ditch Cleaning
| 19***59 | Bracket As | 2 |
| 19***61 | Bucket As-Hoe; -Ditch Cleaning | 1 |
| 19***62 | Plate; (Torque) | 1 |
191-6262 Bucket As-Hoe -Ditch Cleaning
| 13***91 | Edge-Cutting | 1 |
| 19***55 | Plate; (Torque) | 1 |
| 19***59 | Bracket As | 2 |
197-5079 Bucket As-Hoe -Extreme Service
| 13***47 | Edge-Cutting | 1 |
| 15***02 | Bracket As; (Lh) | 1 |
| 15***03 | Bracket As; (Rh) | 1 |
191-6263 Bucket As-Hoe -Ditch Cleaning
| 12***38 | Edge-Cutting | 1 |
| 19***54 | Plate; (Torque) | 1 |
| 19***63 | Bucket As-Hoe; -Ditch Cleaning | 1 |
198-4537 Bucket As-Hoe
| 19***37 | Bucket As-Hoe | 1 |
| 19***55 | Edge | 1 |
| 4T***04 | Adapter | 6 |
200-2201 Bucket As-Hoe
| 13***57 | Edge | 1 |
| 20***01 | Bucket As-Hoe | 1 |
| 20***03 | Plate | 2 |
216-3296 Bucket As-Hoe
| 21***96 | Bucket As-Hoe | 1 |
| 9R***11 | Bearing-Sleeve | 2 |
| 9R***36 | Bracket As-Lift; (Rh) | 2 |
197-5067 Bucket As-Hoe
| 13***78 | Edge | 1 |
| 13***84 | Edge; (Lh) | 1 |
| 13***85 | Edge; (Rh) | 1 |
198-8566 Bucket As-Hoe
| 16***30 | Plate-Identification; (Cat) | 2 |
| 19***40 | Edge | 2 |
| 19***66 | Bucket As-Hoe | 1 |
197-5074 Bucket As-Hoe -High Capacity
| 13***80 | Edge | 1 |
| 13***84 | Edge; (Lh) | 1 |
| 13***85 | Edge; (Rh) | 1 |
191-6261 Bucket As-Hoe -Ditch Cleaning
| 12***38 | Edge-Cutting | 1 |
| 19***54 | Plate; (Torque) | 1 |
| 19***59 | Bracket As | 2 |
198-4520 Bucket As-Hoe
| 16***30 | Plate-Identification; (Cat) | 2 |
| 19***20 | Bucket As-Hoe | 1 |
| 19***40 | Edge | 1 |
197-5075 Bucket As-Hoe -High Capacity
| 13***81 | Edge; (Center) | 1 |
| 13***84 | Edge; (Lh) | 1 |
| 13***85 | Edge; (Rh) | 1 |
197-5070 Bucket As-Hoe -Heavy Duty
| 13***80 | Edge | 1 |
| 13***84 | Edge; (Lh) | 1 |
| 13***85 | Edge; (Rh) | 1 |
200-2200 Bucket As-Hoe
| 13***17 | Edge | 1 |
| 20***00 | Bucket As-Hoe | 1 |
| 20***02 | Plate | 2 |
151-7822 Bucket As-Hoe -Heavy-Duty
| 13***17 | Edge | 1 |
| 15***22 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 15***02 | Bracket As; (Lh) | 1 |
200-2199 Bucket As-Hoe
| 12***94 | Edge | 1 |
| 20***99 | Bucket As-Hoe | 1 |
| 20***01 | Plate | 2 |
197-5080 Bucket As-Hoe -Extreme Service
| 15***02 | Bracket As; (Lh) | 1 |
| 15***03 | Bracket As; (Rh) | 1 |
| 16***80 | Bearing-Sleeve | 2 |
151-7811 Bucket As-Hoe
| 13***57 | Edge | 1 |
| 15***11 | Bucket As-Hoe | 1 |
| 15***02 | Bracket As; (Lh) | 1 |
192-0657 Bucket As-Hoe -Ditch Cleaning
| 19***57 | Bucket As-Hoe; -Ditch Cleaning | 1 |
| 19***62 | Plate; (Torque) | 1 |
| 19***66 | Edge-Cutting | 1 |
198-8576 Bucket As-Hoe
| 19***55 | Edge | 1 |
| 19***76 | Bucket As-Hoe | 1 |
| 4T***04 | Adapter | 6 |
192-0658 Bucket As-Hoe -Ditch Cleaning
| 19***58 | Bucket As-Hoe; -Ditch Cleaning | 1 |
| 19***63 | Plate; (Torque) | 1 |
| 19***67 | Edge-Cutting | 1 |
192-0660 Bucket As-Hoe -Ditch Cleaning
| 13***91 | Edge-Cutting | 1 |
| 19***55 | Plate; (Torque) | 1 |
| 19***60 | Bucket As-Hoe; -Ditch Cleaning | 1 |
151-7812 Bucket As-Hoe
| 12***78 | Edge | 1 |
| 15***12 | Bucket As-Hoe | 1 |
| 15***02 | Bracket As; (Lh) | 1 |
190-1079 Bucket Gp-General Purpose
| 13***03 | Tooth-Uni | 1 |
| 15***29 | Bracket As; (Lh) | 1 |
| 15***30 | Bracket As; (Rh) | 1 |
190-1078 Bucket Gp-General Purpose
| 19***78 | Bucket Group-General Purpose | 1 |
| 9R***02 | Bucket As | 1 |
| 9R***20 | Edge Group-Cutting | 1 |
190-1056 Bucket Gp-General Purpose
| 19***56 | Bucket Group-General Purpose | 1 |
| 9R***01 | Bucket As-Loader | 1 |
| 9R***21 | Edge Group-Cutting | 1 |
190-1055 Bucket Gp-General Purpose
| 19***55 | Bucket Group-General Purpose | 1 |
| 9R***02 | Bucket As | 1 |
| 9R***66 | Tooth Group-Uni | 1 |
151-7881 Bucket Gp-Hoe -Heavy-Duty
| 13***06 | Tooth Group-Uni | 6 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 15***24 | Bucket As-Hoe; -Heavy-Duty | 1 |
198-4538 Bucket Gp-Hoe -High Capacity
| 19***38 | Bucket Group-Hoe; -High Capacity | 1 |
| 19***66 | Bucket As-Hoe | 1 |
| 1U***02 | Tip-Penetration; (Long) | 1 |
198-8567 Bucket Gp-Hoe -High Capacity
| 19***67 | Bucket Group-Hoe; -High Capacity | 1 |
| 19***68 | Bucket As-Hoe | 1 |
| 1U***02 | Tip-Penetration; (Long) | 1 |
198-4536 Bucket Gp-Hoe -High Capacity
| 19***36 | Bucket Group-Hoe; -High Capacity | 1 |
| 19***39 | Bucket As-Hoe | 1 |
| 1U***02 | Tip-Penetration; (Long) | 1 |
198-8569 Bucket Gp-Hoe -High Capacity
| 19***69 | Bucket Group-Hoe; -High Capacity | 1 |
| 19***70 | Bucket As-Hoe | 1 |
| 1U***02 | Tip-Penetration; (Long) | 1 |
197-5102 Bucket Gp-Hoe -Extreme Service
| 16***43 | Pin | 1 |
| 16***44 | Pin | 1 |
| 19***83 | Bucket Group-Hoe; -Standard Duty | 1 |
198-8575 Bucket Gp-Hoe -High Capacity
| 19***75 | Bucket Group-Hoe; -High Capacity | 1 |
| 19***76 | Bucket As-Hoe | 1 |
| 1U***02 | Tip-Penetration; (Long) | 1 |
197-5094 Bucket Gp-Hoe -Heavy-Duty
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***05 | Tip Group-Penetration | 4 |
| 16***89 | Tack-Fastener | 4 |
197-5098 Bucket Gp-Hoe -High Capacity
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***05 | Tip Group-Penetration | 4 |
| 16***89 | Tack-Fastener | 4 |
198-8573 Bucket Gp-Hoe -High Capacity
| 19***73 | Bucket Group-Hoe; -High Capacity | 1 |
| 19***74 | Bucket As-Hoe | 1 |
| 1U***02 | Tip-Penetration; (Long) | 1 |
151-7879 Bucket Gp-Hoe -Heavy Duty
| 13***06 | Tooth Group-Uni | 4 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 15***22 | Bucket As-Hoe; -Heavy-Duty | 1 |
151-7882 Bucket Gp-Hoe -Heavy-Duty
| 15***66 | Bucket Group-Hoe | 1 |
| 15***82 | Bucket Group-Hoe; -Heavy-Duty | 1 |
| 16***43 | Pin | 1 |
197-5083 Bucket Gp-Hoe
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***05 | Tip Group-Penetration | 4 |
| 16***89 | Tack-Fastener | 4 |
197-5085 Bucket Gp-Hoe
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***05 | Tip Group-Penetration | 5 |
| 16***89 | Tack-Fastener | 4 |
151-7868 Bucket Gp-Hoe
| 13***06 | Tooth Group-Uni | 5 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 15***11 | Bucket As-Hoe | 1 |
197-5090 Bucket Gp-Hoe -Heavy-Duty
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***05 | Tip Group-Penetration | 4 |
| 16***89 | Tack-Fastener | 4 |
151-7866 Bucket Gp-Hoe
| 13***03 | Tooth-Uni | 1 |
| 13***06 | Tooth Group-Uni | 3 |
| 15***66 | Bucket Group-Hoe | 1 |
197-5093 Bucket Gp-Hoe -Heavy-Duty
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***05 | Tip Group-Penetration | 6 |
| 16***89 | Tack-Fastener | 4 |
200-2193 Bucket Gp-Hoe
| 13***03 | Tooth-Uni | 1 |
| 13***06 | Tooth Group-Uni | 3 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
174-6362 Bucket Gp-Hoe
| 15***77 | Bucket Group-Hoe; -Heavy Duty | 1 |
| 16***43 | Pin | 1 |
| 16***44 | Pin | 1 |
200-2194 Bucket Gp-Hoe
| 13***03 | Tooth-Uni | 1 |
| 13***06 | Tooth Group-Uni | 4 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
197-5096 Bucket Gp-Hoe -High Capacity
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***05 | Tip Group-Penetration | 5 |
| 16***89 | Tack-Fastener | 4 |
198-8579 Bucket Gp-Hoe -High Capacity
| 13***03 | Tooth-Uni | 1 |
| 13***06 | Tooth Group-Uni | 3 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
197-5101 Bucket Gp-Hoe
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***05 | Tip Group-Penetration | 6 |
| 16***89 | Tack-Fastener | 4 |
151-7877 Bucket Gp-Hoe -Heavy Duty
| 13***03 | Tooth-Uni | 1 |
| 13***06 | Tooth Group-Uni | 3 |
| 15***77 | Bucket Group-Hoe; -Heavy Duty | 1 |
197-5095 Bucket Gp-Hoe -High Capacity
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***05 | Tip Group-Penetration | 5 |
| 16***89 | Tack-Fastener | 4 |
197-5100 Bucket Gp-Hoe -Extreme Service
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***05 | Tip Group-Penetration | 5 |
| 16***89 | Tack-Fastener | 4 |
198-4519 Bucket Gp-Hoe -High Capacity
| 19***19 | Bucket Group-Hoe; -High Capacity | 1 |
| 19***31 | Bucket As-Hoe | 1 |
| 1U***02 | Tip-Penetration; (Long) | 1 |
151-7869 Bucket Gp-Hoe
| 13***06 | Tooth Group-Uni | 6 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 15***12 | Bucket As-Hoe | 1 |
197-5097 Bucket Gp-Hoe -High Capacity
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***05 | Tip Group-Penetration | 6 |
| 16***89 | Tack-Fastener | 4 |
197-5084 Bucket Gp-Hoe
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***05 | Tip Group-Penetration | 5 |
| 16***89 | Tack-Fastener | 4 |
197-6959 Bucket Gp-Hoe -Coral
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 19***59 | Bucket Group-Hoe; -Coral | 1 |
197-5103 Bucket Gp-Hoe
| 16***43 | Pin | 1 |
| 16***44 | Pin | 1 |
| 19***03 | Bucket Group-Hoe; -Standard Duty | 1 |
200-2195 Bucket Gp-Hoe
| 13***03 | Tooth-Uni | 1 |
| 13***06 | Tooth Group-Uni | 5 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
198-8577 Bucket Gp-Hoe -High Capacity
| 19***77 | Bucket Group-Hoe; -High Capacity | 1 |
| 19***78 | Bucket As-Hoe | 1 |
| 1U***02 | Tip-Penetration; (Long) | 1 |
174-6365 Bucket Gp-Hoe -Heavy Duty
| 15***54 | Edge | 1 |
| 15***57 | Bearing-Sleeve | 2 |
| 16***43 | Pin | 1 |
198-4530 Bucket Gp-Hoe -High Capacity
| 19***30 | Bucket Group-Hoe; -High Capacity | 1 |
| 19***33 | Bucket As-Hoe | 1 |
| 1U***02 | Tip-Penetration; (Long) | 1 |
151-7870 Bucket Gp-Hoe
| 15***70 | Bucket Group-Hoe | 1 |
| 15***55 | Edge | 1 |
| 4F***56 | Bolt-Plow; (5/8-11x2.5-In) | 2 |
197-5086 Bucket Gp-Hoe
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***05 | Tip Group-Penetration | 6 |
| 16***89 | Tack-Fastener | 4 |
197-5091 Bucket Gp-Hoe -Heavy-Duty
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***05 | Tip Group-Penetration | 5 |
| 16***89 | Tack-Fastener | 4 |
198-4532 Bucket Gp-Hoe -High Capacity
| 19***32 | Bucket Group-Hoe; -High Capacity | 1 |
| 19***35 | Bucket As-Hoe | 1 |
| 1U***02 | Tip-Penetration; (Long) | 1 |
198-4534 Bucket Gp-Hoe -High Capacity
| 19***34 | Bucket Group-Hoe; -High Capacity | 1 |
| 19***37 | Bucket As-Hoe | 1 |
| 1U***02 | Tip-Penetration; (Long) | 1 |
216-3294 Bucket Gp-Hoe -Narrow
| 10***66 | Bulldozer As | 1 |
| 21***94 | Bucket Group-Hoe; -Narrow | 1 |
| 25***51 | Clam As-Multipurpose Bucket | 1 |
200-2196 Bucket Gp-Hoe
| 13***03 | Tooth-Uni | 1 |
| 13***06 | Tooth Group-Uni | 6 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
151-7867 Bucket Gp-Hoe
| 13***06 | Tooth Group-Uni | 4 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 15***10 | Bucket As-Hoe | 1 |
197-5087 Bucket Gp-Hoe
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***05 | Tip Group-Penetration | 3 |
| 16***89 | Tack-Fastener | 4 |
151-7880 Bucket Gp-Hoe -Heavy Duty
| 13***06 | Tooth Group-Uni | 5 |
| 15***23 | Bucket As-Hoe; -Heavy-Duty | 1 |
| 15***80 | Bucket Group-Hoe; -Heavy Duty | 1 |
194-2065 Bucket Gp-Hoe
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***05 | Tip Group-Penetration | 3 |
| 16***89 | Tack-Fastener | 4 |
198-8571 Bucket Gp-Hoe -High Capacity
| 19***71 | Bucket Group-Hoe; -High Capacity | 1 |
| 19***72 | Bucket As-Hoe | 1 |
| 1U***02 | Tip-Penetration; (Long) | 1 |
197-5092 Bucket Gp-Hoe -Heavy-Duty
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***05 | Tip Group-Penetration | 5 |
| 16***89 | Tack-Fastener | 4 |
200-2197 Bucket Gp-Hoe
| 13***03 | Tooth-Uni | 1 |
| 13***06 | Tooth Group-Uni | 2 |
| 20***97 | Bucket Group-Hoe | 1 |
108-3037 Bulldozer As
| 10***13 | Bracket As | 1 |
| 10***14 | Bracket | 2 |
| 10***88 | Bracket | 3 |
104-3967 Bulldozer As
| 10***67 | Bulldozer As | 1 |
| 10***70 | Bracket As; (Lh) | 2 |
| 10***75 | Bracket As; (Rh) | 2 |
112-1777 Bulldozer As
| 11***77 | Bulldozer As | 1 |
| 25***78 | Plate As; (Lh) | 1 |
| 25***80 | Plate As; (Rh) | 1 |
104-3966 Bulldozer As
| 10***66 | Bulldozer As | 1 |
| 10***70 | Bracket As; (Lh) | 2 |
| 10***75 | Bracket As; (Rh) | 2 |
252-9051 Clam As-Multipurpose Bucket
| 09***28 | Fitting-Grease | 1 |
| 13***21 | Pin As; (Hook) | 1 |
| 13***23 | Lock Pin | 1 |
252-9046 Clam As-Multipurpose Bucket
| 25***46 | Clam As-Multipurpose Bucket | 1 |
| 25***78 | Plate As; (Lh) | 1 |
| 25***80 | Plate As; (Rh) | 1 |
178-8850 Coupler Gp-Quick -Backhoe
| 11***10 | Edge-Cutting | 2 |
| 17***50 | Coupler Group-Quick; -Backhoe | 1 |
| 4F***57 | Bolt-Plow; (5/8-11x2.75-In) | 8 |
176-6251 Coupler Gp-Quick -Backhoe
| 13***77 | Pin | 1 |
| 13***78 | Pin | 1 |
| 17***47 | Coupler Group-Quick; -Backhoe | 1 |
178-8849 Coupler Gp-Quick -Backhoe
| 13***77 | Pin | 1 |
| 13***78 | Pin | 1 |
| 17***51 | Coupler Group-Quick; -Backhoe | 1 |
176-6247 Coupler Gp-Quick -Backhoe
| 13***21 | Pin As; (Hook) | 1 |
| 13***23 | Lock Pin | 1 |
| 13***25 | Spring | 1 |
9r-5321 Edge Gp-Cutting
| 10***11 | Bracket As | 2 |
| 10***12 | Fork As | 2 |
| 10***16 | Pin | 1 |
9r-5320 Edge Gp-Cutting
| 3F***08 | Bolt-Plow; (5/8-11x2.25-In) | 8 |
| 4K***67 | Nut Rear Support To Frame | 8 |
| 8T***22 | Washer-Hard-To Lock Carrier Rollers | 8 |
101-4408 Guard Gp-Bucket -Front Bucket
| 10***08 | Guard Group-Bucket; -Front Bucket | 1 |
| 10***10 | Guard As | 1 |
| 10***11 | Retainer As | 2 |
206-3407 Guard Gp-Bucket -Front
| 15***79 | Pin | 1 |
| 20***07 | Guard Group-Bucket; -Front | 1 |
| 3B***19 | Pin-Cotter | 4 |
101-4409 Guard Gp-Bucket
| 10***09 | Guard Group-Bucket | 1 |
| 10***11 | Retainer As | 2 |
| 10***12 | Chain | 1 |
204-5261 Guard Gp-Bucket -Front
| 10***15 | Film; (Reflector) | 1 |
| 20***61 | Guard Group-Bucket; -Front | 2 |
178-3593 Mounting Gp-Bucket -Backhoe, Quick Coupler
| 10***13 | Bracket As | 1 |
| 10***14 | Bracket | 2 |
| 10***88 | Bracket | 2 |
137-3848 Mounting Gp-Bucket -Backhoe, Quick Coupler
| 13***48 | Mounting Group-Bucket; -Backhoe, Quick Coupler | 1 |
| 15***79 | Pin | 1 |
| 15***80 | Pin | 1 |
108-1587 Mounting Gp-Fork
| 10***87 | Mounting Group-Fork | 1 |
| 17***00 | Stop As; (Lh) | 1 |
| 18***73 | Stop As; (Rh) | 1 |
177-4903 Stop Gp-Bucket -Backhoe
| 17***03 | Stop Group-Bucket; -Backhoe | 1 |
| 17***01 | Stop As | 1 |
| 18***74 | Stop As | 1 |
177-4904 Stop Gp-Bucket -Backhoe
| 13***03 | Tooth-Uni | 8 |
| 17***04 | Stop Group-Bucket; -Backhoe | 1 |
| 4F***57 | Bolt-Plow; (5/8-11x2.75-In) | 16 |
9r-5866 Tooth Gp-Uni
| 13***03 | Tooth-Uni | 1 |
| 4F***57 | Bolt-Plow; (5/8-11x2.75-In) | 2 |
| 4K***67 | Nut Rear Support To Frame | 2 |
135-8206 Tooth Gp-Uni
| 11***09 | Knob-Control | 1 |
| 12***12 | Screw-Pan Head; (8-16x0.32-In) | 2 |
| 13***32 | Screw; (8-18x.39 In) | 2 |
424D serial number reference
The PIN plate on the 424D is riveted to the machine frame, left side, above the base of the loader cylinder arm near the front of the machine. It carries the full product identification number; the first three characters are the letter prefix identifying the production/configuration run, and the digits that follow are the sequential unit number within that run. Match the 3-letter prefix off the plate to the serial range in the parts/service manual to confirm engine and configuration for that specific unit.
| Prefix | Identifies | Notes |
|---|---|---|
| BGP | 424D Side Shift Backhoe Loader, early production run | Machine serial BGP00001 and up. Units BGP00001-00647 carry the 3054 engine; units BGP00648 and up in this run carry the 3054B — confirm the exact unit against the plate for a given machine. |
| BKR | 424D Side Shift Backhoe Loader, early production run | Machine serial BKR00001 and up, produced alongside BGP. Early units carry the 3054 engine; units from around BKR00529 on carry the 3054B — confirm the exact unit against the plate for a given machine. |
| CJZ | 424D Side Shift Backhoe Loader, later production run | Machine serial CJZ00001 and up. Powered by the 3054C engine. Falls in the later part of 424D production, after the BGP/BKR runs. |
| RXA | 424D Side Shift Backhoe Loader, later production run | Machine serial RXA00001 and up, produced alongside CJZ. Powered by the 3054C engine. |
Frequently asked questions
What engine does the Cat 424D backhoe loader use?
The 424D runs Caterpillar's 4.2 L (256 cu in) 3054-family four-cylinder naturally aspirated diesel, rated around 55 kW (74 hp) net and 57 kW (77 hp) gross at 2200 rpm. Early BGP-prefix machines started with the base 3054, moving to the 3054B partway through that serial run and continuing through BKR-prefix units; later CJZ/RXA-prefix production carries the 3054C. Check the engine serial prefix on your machine to confirm which variant it carries.
What is the operating weight of the Cat 424D?
Operating weight runs roughly 7,115-9,800 kg (15,700-21,600 lb), varying by configuration - 2WD versus 4WD, center-pivot versus side-shift boom, standard versus extendable dipper stick, and counterweight or tire package. A standard 4WD center-pivot unit typically comes in around 7,500 kg (16,500 lb).
What replaced the Cat 424D?
Caterpillar did not carry the 424 designation forward when the D-series gave way to the E-series around 2006; the similarly sized 422E, built on the same 3054C engine, took its place in the North American lineup, while 420D and 428D continued on as 420E and 428E. A separate 424 and 424B nameplate sold in other regions today is a different, current-production machine and not a direct descendant of this D-series model.
What 424D owners discuss
What causes a 424D to suddenly lose forward and reverse with no other symptoms?
Owners report this is usually an electrical fault, not a transmission failure. When the FNR solenoids on top of the transmission show no voltage, check fuses, the neutral-start switch, and the park-brake switch circuit first. On this power-shuttle machine the park-brake logic and neutral-start switch sit in series with the FNR circuit, so a bad switch or a corroded connector at the shift-lever plug can drop power to both solenoids even though the transmission itself is fine. Confirm the transmission still shifts when pushed by hand at the valve body before pulling it apart for repair. Have your dealer verify wiring and switch continuity if a meter check does not isolate the fault.
What does it mean if 1st and 2nd gear are weak or the machine will not move, but 3rd and 4th work normally?
This points to a power-shuttle clutch or oil-condition problem inside the transmission, not a hydraulic-system fault by itself. On these machines the pattern has shown up after a failed hydraulic pump shaft seal let hydraulic oil migrate into the transmission case, diluting the transmission oil and affecting clutch engagement in the lower, more clutch-dependent gears. A filter and oil change alone will not fix it if pump-seal contamination is the root cause. Check the hydraulic pump drive seal and the transmission oil condition together, not one or the other in isolation.
How does the side-shift backhoe on a 424D actually move, hydraulically or by hand?
The side-shift carriage on this machine is a manual mechanism, not powered, even though the loader and backhoe functions themselves are all hydraulic. To move it, swing the boom to the side/transport position, release the carriage lock, then physically slide the backhoe assembly along the frame rail to the working side before relocking it. Operators new to this design sometimes look for a hydraulic side-shift control that does not exist on this model.
What engine issues come up on the 3054-family engine used in this backhoe?
The 424D ran the naturally aspirated 3054B through most of its production, with later serial ranges moving to the 3054C. Across the 3054 engine family generally, the front gear-case seal is a known weak point. When it fails, coolant crosses into the engine oil and the rising oil level gets mistaken for a head gasket problem when the real cause is the gear case. Naturally aspirated versions are reported as less prone to head gasket failure than turbocharged 3054 variants. Cold starting is a recurring complaint. Cycling the glow plugs for 30 to 45 seconds before cranking, even in mild weather, is a habit many owners repeat regardless of ambient temperature. Overheating on these engines usually traces back to a plugged radiator, a stuck thermostat, or a failing fan rather than the engine itself. Have your dealer verify which 3054 variant and injection pump your specific serial range carries before assuming a fix meant for one applies to the other.
What electrical or sensor faults come up most on this machine?
The recurring complaint is a no-start or no-forward/reverse condition traced back to the neutral-start and park-brake switch circuit rather than a major component failure. These switches and their wiring at the shift lever and transmission cover corrode or fail over time. Because the park-brake logic depends on the transmission lever correctly signaling neutral, a bad switch can block both starting and drive engagement at the same time. Checking this switch circuit is one of the first diagnostic steps owners take before condemning the transmission or starter.
What wear points should an owner watch on the front axle, pins, and bushings on a wheeled machine like this?
This is a wheeled backhoe loader, so the wear pattern equivalent to undercarriage wear on tracked equipment is front axle kingpin play and loader/backhoe pin-and-bushing wear. Kingpin play shows up as uneven front tire wear and a looser steering feel; checking it properly needs the front end off the ground so the wheel can be rocked to feel vertical and lateral movement. Excessive slop or a clunk in the loader or backhoe linkage pins usually means the pins and bushings are due for replacement, and wear accelerates fast if the grease schedule slips. Both over-greasing and under-greasing shorten pin life. Stabilizer cylinder drift under a loaded stabilizer is another common check; visible creep points to worn cylinder seals or a leaking control valve.
What should a buyer check before purchasing a used 424D?
Confirm the serial prefix and which 3054 engine variant the machine actually carries; this affects parts and expected power output and sellers do not always know which one they have. Check the engine oil for a milky look or coolant smell, a sign of the front gear-case seal failing, and check the transmission oil for signs of hydraulic-oil contamination if the machine has any transmission-issue history. Rock the front wheels to check for kingpin play, cycle the loader and backhoe through full range while watching for pin and bushing clunk or stabilizer cylinder drift, and test the side-shift carriage lock and slide manually since it is not hydraulic on this model. Start the machine cold if possible to see how it behaves on glow-plug cycling, and run it through all four power-shuttle gears in both directions to rule out the weak-low-gear symptom some owners report. Have your dealer verify hour-meter accuracy and inspect the front gear case for coolant-oil cross-contamination before final purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 424D part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.