Caterpillarbackhoe loader(no series)
Caterpillar 420D
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 420D is a mid-size center-pivot backhoe loader built from around 2000 to 2006, sitting in Cat's D-series backhoe lineup between the smaller 416D and the larger 428D/430D models. It runs a Cat 3054C four-cylinder diesel rated near 85 hp (63 kW) net at 2200 rpm, with gross output around 88-89 hp (65-66 kW) off a roughly 4.4 L (268 cu in) block, paired to a power-shuttle transmission (four-speed standard, a five-speed option was also offered) with 2WD or 4WD axle choices. Nominal operating weight runs about 7,150-7,200 kg (15,766-15,772 lb) in base trim, climbing toward 9,800 kg (21,605 lb) with counterweights, cab, and 4WD ballast — actual weight varies by configuration. Cat offered it as a standard center-pivot loader and as a 420D IT integrated-toolcarrier version with a single-tilt loader arm and quick coupler for running Cat work tools. The D-series followed the earlier 420 Series II generation and was itself replaced by the 420E around 2006.
Across the D-series run Cat refined loader hydraulics, coupler options, and cab/ROPS comfort through several production prefixes without changing the core 3054C powertrain, so parts and service procedures carry across most of the run with only minor prefix-specific differences. The 420D matters today mainly as a used and parts-market machine: it is a high-volume model built around a mechanically simple 3000-series engine and a conventional power-shuttle driveline, so engine rebuild kits, driveline parts, and service documentation stay easy to source well after Cat moved the line to E- then F-series machines. For buyers and independent shops, that makes the 420D a dependable, low-cost entry point into backhoe ownership even though it now sits two full generations behind Cat's current 420 lineup.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 420D specifications
Engine
| Engine model | Cat 3054T, 4.4L turbocharged diesel (Cat parts literature also lists it as 3054C DIT); shared block family with 420D IT, distinct tune from the later 420E |
| Cylinders | 4, inline, liquid-cooled |
| Displacement / bore x stroke | 4.4 L (268 cu in); bore 105 mm (4.13 in) x stroke 127 mm (5.00 in) |
| Gross power | 88 hp (65.6 kW) at 2,200 rpm, SAE J1995 |
| Net power | 85 hp (63.4 kW), SAE J1349 |
| Peak torque | 344 Nm (254 lb-ft) at 1,400 rpm; about 27% torque rise |
| Emissions tier | Not published on available 420D spec sheets. Built roughly 2000-2006, spanning the EPA nonroad Tier 1/Tier 2 transition for this power class - confirm tier with a dealer for a specific serial number |
Weights
| Operating weight (nominal) | 7,150-7,154 kg (15,763-15,772 lb); varies slightly by 2WD, 4WD (MFWD), and IT (integrated toolcarrier) configuration |
| Operating weight (maximum, full attachments/ballast) | 9,800 kg (21,605 lb) |
Dimensions
| Transport length | 6.97 m (22.9 ft / 274.4 in) |
| Transport width | 2.35 m (7.7 ft / 92.5 in) |
| Height to cab/ROPS top | 2.77 m (9.1 ft / 109.1 in) |
| Overall transport height (backhoe stowed, highest point) | 3.59 m (11.8 ft / 141.3 in) |
| Wheelbase | 2.10 m (6.9 ft / 82.7 in) |
| Ground clearance | 0.29 m (11.5 in) |
| Turning radius | 5.35 m (17.6 ft) |
Performance
| Travel speed | Up to 32.8 km/h (20.4 mph) with the standard 4-speed power shuttle (4F/4R); an optional Auto-Shift power shuttle offered 5F/3R at a similar top speed |
| Backhoe dig depth, standard stick | 4.39 m (14.4 ft) |
| Backhoe dig depth, extended (extendahoe) stick | 5.52 m (18.1 ft) |
| Backhoe bucket dig force | 6,673 kg (14,712 lb) |
| Backhoe reach from swing pivot, standard stick | 5.65 m (18.5 ft) |
| Loader bucket capacity, standard | 0.96-1.0 m3 (1.25-1.3 yd3) |
| Loader breakout force | 4,599 kg (10,139 lb) |
| Loader lift capacity at full height | 2,896 kg (6,385 lb) |
| Loader dump clearance, bucket dumped | 2.55 m (8.35 ft) |
Service capacities (summary)
| Fuel tank | 128 L (33.9 US gal) |
| Hydraulic system, total incl. tank | 79.5 L (21.0 US gal) |
| Engine oil, with filter | 7.6 L (2.0 US gal) |
| Cooling system, with A/C | 15.9 L (4.2 US gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
420D fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) - Cat 3054C DIT turbocharged diesel | 7.6 L (8.0 US qt / 6.7 Imp qt) | Cat DEO (Diesel Engine Oil). SAE 15W-40 for most operating climates; step down to SAE 10W-30 for cooler ambient down to about -18 deg C (0 deg F); low-viscosity 0W or 5W grades apply only for extreme cold starts. |
| Cooling system | 15.9 L (4.2 US gal / 16.8 US qt) standard radiator; 16.7 L (4.4 US gal) on the high-ambient radiator option | Cat ELC (Extended Life Coolant), premixed ethylene-glycol formula, extended change interval. Cat DEAC (Diesel Engine Antifreeze/Coolant) is the conventional alternative and needs a supplemental coolant additive on schedule. |
| Fuel tank | 128.7 L (34.0 US gal / 28.3 Imp gal) | Ultra-low-sulfur No. 2-D diesel for normal service; blend with No. 1-D diesel below about -7 deg C (20 deg F) for cold-weather flow. |
| Transmission - power shuttle (2WD) | 15.1-18.2 L (4.0-4.8 US gal) - reported capacity varies by source/configuration | Cat TDTO (Transmission/Drive Train Oil), meets Cat TO-4 spec. SAE 30 for normal ambient; SAE 10W for cold starts, SAE 50 for sustained high ambient. |
| Transmission - auto-shift (2WD and AWD) | 15.1 L (4.0 US gal) | Cat TDTO (TO-4 spec), same viscosity-by-climate guidance as the power-shuttle transmission. |
| Front axle differential housing (4WD/AWD models) | about 7.3-7.6 L (1.9-2.0 US gal) per axle | Cat TDTO (TO-4 spec) drive-train oil, matched to the transmission and rear axle fluid. |
| Front axle planetary hub, each side (4WD/AWD models) | about 0.76 L (0.2 US gal) per side | Cat TDTO (TO-4 spec). |
| Rear axle / final drive (inboard wet-disc service brakes) | 24.2 L (6.4 US gal) | Cat TDTO (TO-4 spec) only. Standard axle gear oil is not used here - the wet brakes need the friction-modified TO-4 fluid to avoid brake chatter and clutch-plate wear. |
| Hydraulic system, total (pump, cylinders, lines and tank) | 79.0-79.5 L (20.9-21.0 US gal) total system; about 37.9 L (10.0 US gal) tank refill | Cat HYDO Advanced hydraulic oil (SAE 10W). Cat TDTO or Cat MTO are listed as acceptable alternates when Cat Hydraulic Oil is not on hand. |
| Grease - chassis and pin lubrication points | Applied per fitting on the lubrication schedule; no reservoir capacity | Cat Multipurpose Grease (MPGM), NLGI 2, service range about -30 to 40 deg C (-22 to 104 deg F). Cat Ultra 5Moly grease is recommended for heavily loaded pins and bushings (moly-fortified). |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 420D maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 3,000 h |
|
| Every 6,000 h |
|
Servicing the 420D beyond the schedule
Predictive Maintenance & Fluid Analysis
Track the 3054C engine, power-shuttle transmission, and both differentials and final drives with scheduled oil sampling built into the 250- and 500-hour service points rather than treated as an extra step. Watch hydraulic oil condition closely on the load-sensing pump and backhoe cylinders — fine metal in a sample usually flags pin, bushing, or pump wear before it shows up as a leak or a sluggish arm. Trend coolant condition too, especially on machines still running factory extended-life coolant past the 3000-hour mark.
Corrective & Common Repairs
Expect the usual wear points on a high-hour 420D: backhoe boom, stick, and bucket pins and bushings that loosen once the 10-hour grease points get skipped, power-shuttle clutch packs that slip after fuel-water separator neglect fouls the 3054C injection system, and hydraulic cylinder seals weeping at the stabilizers and loader tilt ram. Front and rear axle final-drive seals are a common leak point on 4WD units. Most of these trace back to missed daily lubrication rather than a design flaw.
Overhaul & Rebuild Points
At major-overhaul hours, plan first on the 3054C top end — injectors, turbocharger, valve lash — and the power-shuttle clutch packs, alongside a hydraulic pump and cylinder reseal once the load-sensing system starts losing pressure under load. Backhoe and loader pin and bushing sets wear as a group on high-cycle machines and typically get replaced together rather than one at a time. Front and rear differentials and final drives are durable but worth a teardown once oil sampling shows rising wear metal.
Seasonal & Environment Servicing
Cold climates call for block-heater use and the correct extended-life coolant blend to protect the 3054C, plus a fully drained fuel-water separator before hard freezes to keep the injection system from icing. In hot, dusty sites, service the engine air filter and radiator core ahead of the base 250-hour interval and watch hydraulic oil temperature under sustained digging. Wet, muddy jobsites accelerate king-pin, axle, and stabilizer pin wear, so shorten grease intervals accordingly.
420D common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 110-6326 | Filter Element As-Air | Air intake service | Check fitment → |
| 110-6331 | Filter Element As-Air | Air intake service | Check fitment → |
| 170-7272 | Filter Element-Cab Air | Air intake service | Check fitment → |
| 126-1817 | Filter-Oil | Hydraulic service | Check fitment → |
| 7X-8549 | Switch As-Pressure | Lubrication service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
420D fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| CID 0100 - FMI 03 | Engine oil pressure sender circuit signal above the normal range | Open circuit or damaged wiring at the oil pressure sender, corroded connector, or failed sender unit | Inspect sender wiring and connector for damage or corrosion; confirm actual oil pressure with a mechanical test gauge before condemning the sender |
| CID 0110 - FMI 04 | Engine coolant temperature sender circuit signal below the normal range | Short to ground in the sender wiring or harness, or a failed coolant temperature sender | Check sender wiring for chafing or shorts, test sender resistance against spec, verify actual coolant temperature with a separate thermometer |
| CID 0168 - FMI 02 | Electrical system (battery) voltage erratic or intermittent | Loose or corroded battery terminals, worn alternator brushes, a failing voltage regulator, or a bad ground strap | Load-test the batteries, check charging voltage at idle and rated rpm, clean and tighten all battery and ground connections |
| CID 0585 - FMI 08 | Transmission output speed sensor signal abnormal or erratic | Damaged sensor tip, incorrect sensor air gap, metal debris on the sensor face, or a chafed harness | Pull and inspect the sensor, reset the air gap to spec, check harness continuity and connector condition |
| CID 0702 - FMI 02 | Transmission gear/direction lever selector switch signal erratic | Worn or misadjusted selector switch, out-of-adjustment shift linkage, or intermittent switch contacts | Check lever linkage adjustment, test switch continuity in each gear position, replace the switch if contacts are worn |
| CID 0627 - FMI 03 | Park brake pressure switch circuit signal above normal (open circuit) | Open wiring, a disconnected connector, or a failed park brake pressure switch | Check the switch connector and wiring for an open circuit, verify actual park brake release pressure, replace the switch if it fails to close at the specified pressure |
| CID 0296 - FMI 05 | Transmission control circuit current below normal (open circuit) | Open solenoid coil, a disconnected connector, or broken wiring to a transmission control solenoid | Check solenoid coil resistance, inspect the connector and wiring for an open circuit, verify harness continuity back to the controller |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
420D attachments & work tools
Loader buckets
General-purpose and multi-purpose (4-in-1 clamshell) front buckets are offered for this class, sized around 0.96-1.03 m3 (1.25-1.35 yd3) with roughly 2.26 m (89 in) cutting width. Rock and coral bucket profiles are also offered for abrasive or loose-material work.
Backhoe buckets
Rear digging buckets for this size class run roughly 300 mm to 1.5 m (12 to 60 in) wide, covering standard-duty, heavy-duty, and heavy-duty rock profiles plus a ditch-cleaning bucket for wide, shallow trenching. Bucket pin spacing is shared across the contemporary 416-430 backhoe loader line, so buckets interchange within that family.
Backhoe pin-grabber coupler
The rear coupler is a cab-controlled, hydraulic pin-grabber design that swaps buckets and other pinned work tools without pulling pins, switched from the dash. Pin-puller adapter couplers let the machine pick up other manufacturers' bucket pin spacing for cross-brand compatibility.
Integrated Toolcarrier (IT) front coupler
The IT loader-arm option (420D IT) replaces the standard single-tilt loader with a parallel-lift, integrated-toolcarrier arm that connects to the Cat IT work-tool family through flat-face, connect-under-pressure hydraulic quick-disconnects. Most IT tool changes are done from the seat in well under a minute; the base 420D single-tilt loader does not carry this coupler.
Hydraulic hammer / breaker
A rear-mounted hydraulic hammer runs off the backhoe's unidirectional auxiliary hydraulic circuit, sized to this machine's stick and flow class rather than to a smaller mini-excavator hammer. Factory hammers for this class include automatic shut-off and a vibration-damping mount to protect the stick and machine structure.
Auger
A hydraulic earth auger mounts to the backhoe stick on the bidirectional auxiliary circuit, with drive units offered at different speed/torque combinations to suit bit diameter and soil hardness. Bit sizing is matched to the job rather than fixed to one machine spec.
Thumb
Backhoe thumbs are offered as a fixed stiff-link mechanical thumb or a hydraulically actuated utility thumb, both mounting to the stick alongside the standard bucket for grabbing debris, pipe, and rock. The hydraulic version needs the bidirectional auxiliary circuit; the stiff-link version needs none.
Forks
Pallet forks and utility (pierceable-material) forks mount to the loader end for palletized loads and loose fibrous or bagged material respectively. These use the loader's standard lift and tilt function and do not need auxiliary hydraulics.
Auxiliary hydraulic tools (broom, cold planer, compactor, grapple)
The loader and backhoe auxiliary hydraulic circuits also support a rotary broom, small cold planer, vibratory plate compactor, and grapple, sized to this machine's flow class. These tools need the machine's hydraulic work-tool package, unidirectional or bidirectional flow selected from the cab, rather than running off base hydraulics alone.
Extendahoe (dipperstick extension)
The extendahoe option adds a hydraulically extending dipperstick section for extra digging depth and reach beyond the standard stick. Reported digging depth runs roughly 4.4-4.5 m (14.4-14.7 ft) retracted to about 5.5-6.7 m (18-22 ft) extended; exact figures vary by configuration/series.
Power Lift
Power Lift is a button-activated factory option that raises loader lift capacity by briefly dropping engine rpm and redirecting hydraulic flow, giving lift performance the maker compares to an 8-ton excavator class machine. It is meant for occasional heavy lifts rather than continuous loader work.
Ride Control
Ride Control adds a nitrogen accumulator into the loader lift circuit to cushion the boom over rough ground, switch-engaged from the cab. It reduces bucket spill and machine pitching during load-and-carry travel.
Counterweights
Factory rear counterweight kits are offered in multiple increments to add backhoe stability and lift capacity for heavier work-tool duty cycles. Reported increments vary by source and configuration, so confirm exact kit weights with your dealer for this model year.
ProControl (precision lift)
ProControl is a loader option aimed at controlled, precise lifting and placement of heavy loads, useful when running pallet forks or a material-handling arm. It complements Power Lift rather than replacing it.
All 420D assemblies by section
Every catalogued assembly group for the Caterpillar 420D. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
145-5882 Air Cleaner Gp
| 11***89 | Air Cleaner Group | 1 |
| 12***38 | Duct | 1 |
| 14***82 | Air Cleaner Group | 1 |
197-3263 Air Cleaner Gp
| 13***70 | Air Cleaner Group | 1 |
| 19***63 | Air Cleaner Group | 1 |
| 8T***89 | Bolt (20mm Long) 0 Degrees); (L=20mm) {For 5br, 6cr} | 4 |
112-9689 Air Cleaner Gp
| 11***26 | Filter Element As-Air; (Primary) | 1 |
| 11***31 | Filter Element As-Air; (Secondary) | 1 |
| 11***89 | Air Cleaner Group | 1 |
197-3264 Air Cleaner Gp
| 14***82 | Air Cleaner Group | 1 |
| 19***64 | Air Cleaner Group | 1 |
| 8T***89 | Bolt (20mm Long) 0 Degrees); (L=20mm) {For 5br, 6cr} | 4 |
130-1470 Air Cleaner Gp
| 11***89 | Air Cleaner Group | 1 |
| 13***70 | Air Cleaner Group | 1 |
| 7M***30 | Rivet-Pop | 3 |
184-7900 Indicator Gp-Air Filter Change
| 11***23 | Fitting | 1 |
| 12***75 | Connector-Filter | 2 |
| 18***00 | Indicator Group-Air Filter Change; -Manual | 1 |
184-7901 Indicator Gp-Air Filter Change
| 11***23 | Fitting | 1 |
| 12***75 | Connector-Filter | 1 |
| 18***01 | Indicator Group-Air Filter Change; -Electric | 1 |
167-8258 Lines Gp-Air
| 13***03 | Hose-Manifold | 1 |
| 16***58 | Lines Group-Air | 1 |
| 16***59 | Adapter-Exhaust | 1 |
253-4396 Muffler & Converter
| 25***96 | Muffler & Converter | 1 |
261-8051 Muffler & Converter
| 26***51 | Muffler & Converter | 1 |
7e-4643 Muffler Gp
| 11***90 | Muffler As | 1 |
| 11***14 | Bracket As | 1 |
| 13***60 | Spacer; (11x19x10-mm Thk) | 1 |
219-9773 Turbocharger Gp
| 13***74 | Seal-O-Ring | 1 |
| 16***86 | Housing As | 1 |
| 16***87 | Cartridge | 1 |
197-3872 Turbocharger Gp
| 06***58 | Clamp-Hose | 2 |
| 10***51 | Bolt; (M8x1.25x65-mm) | 2 |
| 10***21 | Clip | 1 |
148-7183 Turbocharger Gp
| 13***74 | Seal-O-Ring | 1 |
| 14***83 | Turbocharger Group | 1 |
| 16***86 | Housing As | 1 |
Basic Engine
145-8504 Camshaft Gp
| 06***78 | Washer | 1 |
| 06***79 | Dowel | 1 |
| 06***99 | Bushing-Idler Gear | 2 |
141-6149 Cover Gp-Accessory Drive
| 06***10 | Washer | 1 |
| 10***30 | Bolt; (M10x1.5x20-mm) | 1 |
| 11***22 | Bolt; (M8x16-mm) | 5 |
196-4102 Cover Gp-Valve Mechanism
| 10***75 | Seal | 3 |
| 11***05 | Seal-O-Ring | 1 |
| 16***65 | Spring; (Crankcase Breather Hose) | 1 |
145-6688 Crankshaft Gp
| 03***90 | Washer-Thrust; (Standard-Upper)(Upper) | 2 |
| 03***91 | Washer-Thrust; (Standard-Lower)(Lower) | 2 |
| 03***79 | Bearing Kit-Crankshaft (Main) .25mm (.01in) | 1 |
145-6685 Cylinder Block Gp
| 06***08 | Plug | 1 |
| 11***40 | Housing As | 1 |
| 11***41 | Gasket | 1 |
209-6725 Cylinder Block Gp
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 10 |
| 06***06 | Plug | 2 |
152-2884 Cylinder Block Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 10 |
209-5562 Cylinder Block Gp
| 03***68 | Bolt; (5/8-18x3.75-In) | 10 |
| 03***02 | Bearing | 1 |
| 06***02 | Dowel | 10 |
163-9254 Cylinder Head Gp
| 06***43 | Plug-Side-(1.251 Dia.) | 1 |
| 06***44 | Plug-Cylinder Head (Top Face) | 1 |
| 13***60 | Cap | 8 |
145-6852 Cylinder Head Gp
| 14***52 | Cylinder Head Group | 1 |
| 16***61 | Gasket-Cylinder Head | 1 |
| 16***20 | Pin | 2 |
148-9679 Drive Gp-Fan
| 10***87 | Bolt; (M10x1.5x85-mm) | 4 |
| 13***38 | Housing As | 1 |
| 14***79 | Drive Group-Fan | 1 |
146-0180 Fastener Gp-Cylinder Head
| 12***15 | Bolt; (M8x16x1.25-mm) | 3 |
| 14***80 | Fastener Group-Cylinder Head | 1 |
130-1422 Flywheel Gp
| 03***87 | Ring-Starting Motor; (126-Teeth) | 1 |
| 0S***03 | Bolt,Machine Fuel Pump Drive Gear Mounting | 6 |
| 13***22 | Flywheel Group | 1 |
130-6352 Housing Gp-Flywheel
| 10***17 | Plug | 3 |
| 11***63 | Bolt; (M8x1.25x12-mm) | 2 |
| 12***83 | Bolt; (M10x1.5x30-mm) | 6 |
145-8479 Housing Gp-Front
| 14***44 | Shield | 1 |
| 14***45 | Damper | 1 |
| 14***79 | Housing Group-Front | 1 |
148-9685 Lifting Gp-Engine
| 12***00 | Spacer | 2 |
| 14***49 | Plate-Lifting | 1 |
| 14***90 | Plate | 1 |
7e-4644 Mounting Gp-Alternator
| 11***64 | Bracket As | 1 |
| 11***65 | Bracket As | 1 |
| 11***66 | Strap | 1 |
130-1427 Mounting Gp-Alternator
| 10***02 | Bracket | 1 |
| 13***27 | Mounting Group-Alternator | 1 |
| 6I***54 | Bolt; (M8x1.25x30-mm) | 2 |
195-2130 Mounting Gp-Engine
| 10***87 | Plug | 6 |
| 13***70 | Plug | 4 |
| 19***30 | Mounting Group-Engine | 1 |
143-0782 Mounting Gp-Engine & Xmsn
| 11***94 | Support-Front-Lh | 1 |
| 11***95 | Support-Front-Rh | 1 |
| 11***21 | Support As; (Rh) | 1 |
143-0788 Mounting Gp-Engine & Xmsn -Power Shift
| 14***88 | Mounting Group-Engine & Xmsn; -Power Shift | 1 |
| 3E***92 | Washer; (16.75x100x6-mm Thk) | 4 |
| 3E***24 | Mounting As | 2 |
130-4654 Mounting Gp-Starting Motor
| 13***54 | Mounting Group-Starting Motor | 1 |
| 6I***64 | Stud; (M10x1.5x30-mm) | 3 |
140-8175 Pan Gp-Oil
| 03***46 | Gasket | 1 |
| 06***13 | Gasket | 1 |
| 11***09 | Bridge | 1 |
168-0289 Pan Gp-Oil
| 03***46 | Gasket | 1 |
| 06***13 | Gasket | 1 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 13 |
145-6690 Piston & Rod Gp
| 13***73 | Kit-Piston Ring | 4 |
| 14***90 | Piston & Rod Group, Stem; Replaces 420561a1, Stem | 1 |
| 15***90 | Piston As | 4 |
130-4648 Plug Gp-Cylinder Block
| 06***24 | Plug | 2 |
| 13***48 | Plug Group-Cylinder Block | 1 |
130-4647 Plug Gp-Cylinder Head
| 06***44 | Plug-Cylinder Head (Top Face) | 1 |
| 06***45 | Washer-(640mm Id, .064 Thk.) | 1 |
| 13***47 | Plug Group-Cylinder Head | 1 |
141-0728 Plug Gp-Engine
| 14***28 | Plug Group-Engine | 1 |
| 2B***58 | Plug--To Block Upper Front Air Manifold | 2 |
6i-0500 Pulley Gp-Crankshaft
| 6I***00 | Pulley Group-Crankshaft | 1 |
| 6I***01 | Block | 1 |
| 6I***02 | Pulley | 1 |
145-8471 Valve Mechanism Gp
| 00***06 | Ring-Retaining | 2 |
| 06***83 | Plug-Shaft End | 2 |
| 06***87 | Spring-Shaft | 2 |
Braking System
129-0138 Brake Gp-Parking
| 12***64 | Bracket | 1 |
| 12***38 | Brake Group-Parking | 1 |
| 13***82 | Bracket | 1 |
163-0754 Control Gp-Parking Brake
| 16***53 | Lever Group-Hand Control; -Parking Brake | 1 |
| 16***54 | Control Group-Parking Brake | 1 |
| 16***55 | Cable Group | 1 |
184-6570 Control Gp-Parking Brake
| 12***38 | Brake Group-Parking | 1 |
| 15***16 | Switch As; (Parking Brake Alarm) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
165-6918 Control Gp-Service Brake
| 10***34 | Switch As-Limit; (Service Brake) | 2 |
| 11***49 | Tube As | 1 |
| 14***25 | Connector As. | 2 |
163-0753 Lever Gp-Hand Control
| 03***33 | Pin; (38.86 mm Lg) | 1 |
| 16***53 | Lever Group-Hand Control; -Parking Brake | 1 |
| 16***98 | Grip | 1 |
4e-8619 Reservoir Gp-Brake
| 15***07 | Kit-Brake Reservoir | 1 |
| 4E***19 | Reservoir Group-Brake | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
Cooling System
146-0001 Connection Gp-Water
| 14***15 | Seal-O-Ring; (Water Temperature Regulator) | 1 |
| 14***88 | Seal; (Housing, Regulator)(Temperature Regulator Housing) | 1 |
| 14***01 | Connection Group-Water | 1 |
197-3880 Cooler Gp-Fltr Base & Eng Oil
| 10***73 | Bolt; (M10x1.5x60-mm) | 2 |
| 11***44 | Head As-Oil Filter; (Engine) | 1 |
| 11***45 | Connector | 2 |
185-7602 Cooling Ar
| 12***37 | Lamp; (12-Volt) | 1 |
| 13***24 | Seal | 1 |
| 14***13 | Fan Group-Suction | 1 |
185-7603 Cooling Ar-High Ambient Temp
| 12***37 | Lamp; (12-Volt) | 1 |
| 13***24 | Seal | 1 |
| 14***57 | Radiator & Hydraulic Oil Cooler Group | 1 |
202-5775 Cooling Ar-High Ambient Temp -Autoshift
| 14***57 | Radiator & Hydraulic Oil Cooler Group | 1 |
| 14***60 | Fan Group-Suction; -High Ambient | 1 |
| 1N***43 | "V" Belt | 1 |
185-7604 Cooling Ar-High Ambient Temp
| 12***37 | Lamp; (12-Volt) | 1 |
| 13***24 | Seal | 1 |
| 14***57 | Radiator & Hydraulic Oil Cooler Group | 1 |
147-1559 Fan Gp-Suction -High Ambient
| 12***80 | Guard As-Fan | 2 |
| 13***79 | Pulley-Fan Drive | 1 |
| 14***88 | Spacer-Fan | 1 |
145-6713 Fan Gp-Suction
| 13***80 | Pulley-Fan Drive | 1 |
| 14***88 | Spacer-Fan | 1 |
| 14***91 | Spider As; (9-Blade) | 1 |
147-1560 Fan Gp-Suction -High Ambient
| 13***79 | Pulley-Fan Drive | 1 |
| 13***81 | Pulley-Fan | 1 |
| 14***88 | Spacer-Fan | 1 |
198-9723 Fitting Gp-Heater & Air Cond
| 00***57 | Bushing-Reducing | 1 |
| 00***10 | Elbow | 1 |
| 19***23 | Fitting Group-Heater & Air Cond | 1 |
143-0789 Lines Gp-Power Train Cooler -Power Shift
| 03***87 | Elbow-Axle Suction Port | 1 |
| 03***83 | Nipple-Front Axle Suction Port | 1 |
| 11***86 | Bracket As | 1 |
143-0786 Lines Gp-Power Train Cooler
| 11***86 | Bracket As | 1 |
| 13***84 | Clip | 2 |
| 13***04 | Hose As | 1 |
179-6896 Pump Gp-Water
| 10***51 | Bolt; (M8x1.25x65-mm) | 2 |
| 10***71 | Bolt | 1 |
| 10***05 | Bolt; (M8x1.25x90-mm) | 3 |
154-3799 Radiator & Hyd Oil Cooler Gp
| 12***65 | Rivet-Pop | 6 |
| 14***12 | Baffle | 1 |
| 14***58 | Orifice; Not Illustrated, Orifice, Radiator & Hydraulic Oil Cooler Group | 1 |
147-1558 Radiator & Hyd Oil Cooler Gp
| 00***65 | Cap-Radiator; (7 Psi) | 1 |
| 12***65 | Rivet-Pop | 16 |
| 14***58 | Plug As | 1 |
147-1557 Radiator & Hyd Oil Cooler Gp
| 14***37 | Hose-Radiator; (Upper) | 1 |
| 14***38 | Hose-Radiator; (Lower) | 1 |
| 14***40 | Plate | 2 |
Electrical And Starting System
3e-7585 Lamp Gp-Head & Signal
| 10***46 | Lamp; (12-Volt, 4-Watt)(Miniature) | 1 |
| 10***47 | Body As-Lamp | 1 |
| 10***49 | Lens As; (Headlight) | 1 |
3e-7584 Lamp Gp-Head & Signal
| 10***46 | Lamp; (12-Volt, 4-Watt)(Miniature) | 1 |
| 10***47 | Body As-Lamp | 1 |
| 10***48 | Lens As; (Headlight)(High, Low Beam) | 1 |
105-2813 Alternator Gp-Charging
| 10***13 | Alternator Group-Charging | 1 |
| 11***57 | Pulley-Alternator | 1 |
| 11***59 | Frame As-Alternator | 1 |
121-5830 Alternator Gp-Charging
| 10***12 | Alternator Group-Charging*R | 1 |
| 12***30 | Alternator Group-Charging | 1 |
| 2P***91 | V-Belt; (A/C Compressor) | 1 |
121-5832 Alternator Gp-Charging
| 10***13 | Alternator Group-Charging | 1 |
| 12***32 | Alternator Group-Charging | 1 |
| 4N***97 | V-Belt Set; (Includes 2-Belts)(Alternator) | 1 |
121-5831 Alternator Gp-Charging
| 10***13 | Alternator Group-Charging | 1 |
| 12***31 | Alternator Group-Charging | 1 |
| 7W***96 | V-Belt Set; (Includes 2-Belts)(Includes 2 Belts) | 1 |
137-3507 Alternator Gp-Charging
| 10***12 | Alternator Group-Charging*R | 1 |
| 13***07 | Alternator Group-Charging | 1 |
| 4N***97 | V-Belt Set; (Includes 2-Belts)(Alternator) | 1 |
105-2812 Alternator Gp-Charging
| 10***12 | Alternator Group-Charging*R | 1 |
| 11***63 | Pulley-Alternator | 1 |
| 11***65 | Frame As-Alternator | 1 |
122-5865 Battery Gp
| 03***17 | Tread-Nonskid | 1 |
| 12***65 | Battery Group | 1 |
| 13***92 | Cable As-Battery; (Negative)(Battery) | 1 |
119-8016 Battery Gp -Heavy Duty
| 03***17 | Tread-Nonskid | 2 |
| 11***16 | Battery Group; -Heavy Duty | 1 |
| 13***93 | Cable As-Battery; (Negative) | 1 |
166-0659 Heater Gp-Jacket Water
| 16***99 | Element As-Jacket Water Heater; (240-Volt, 1250-Watt) | 1 |
| 16***00 | Kit-Seal | 1 |
| 16***74 | Cord As; (Jacket Water Heater) | 1 |
166-0658 Heater Gp-Jacket Water
| 13***65 | Receptacle As | 1 |
| 16***50 | Cord As; (Jacket Water Heater) | 1 |
| 16***98 | Element As-Jacket Water Heater; (120-Volt, 1250-Watt) | 1 |
221-7683 Heater Gp-Starting Aid -Heater
| 12***56 | Washer | 1 |
| 18***72 | Heater; (Air Inlet) | 1 |
| 22***83 | Heater Group-Starting Aid; -Heater | 1 |
186-0310 Installation Gp-Security
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***15 | Relay As; (12-Volt)(Junction Box) | 1 |
| 12***78 | Locknut; (M6x1-Thd) | 1 |
9r-5369 Lamp Gp-Stop & Tail
| 09***92 | Lamp Group-Stop & Tail | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 5P***09 | Tube-Heat Shrink; (9.52-mm Dia)(0.03-M Each) | 0 |
092-2992 Lamp Gp-Stop & Tail
| 09***92 | Lamp Group-Stop & Tail | 1 |
| 09***79 | Lens; (Stop/Turn Signal) | 1 |
| 3C***81 | Nut | 4 |
180-3663 Lamp Gp-Warning Beacon -Fixed
| 17***34 | Plug As; (Warning Beacon) | 1 |
| 18***63 | Lamp Group-Warning Beacon; -Fixed Mount | 1 |
| 18***15 | Lamp Group-Warning Beacon; (Fixed) | 1 |
180-3664 Lamp Gp-Warning Beacon -Amber, Magnetic Mount, Rotating
| 17***34 | Plug As; (Warning Beacon) | 1 |
| 18***64 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 18***16 | Lamp Group-Warning Beacon; -Magnetic Mount | 1 |
185-8814 Lighting Gp-Flood
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***69 | Lamp Group-Flood; (Front) | 2 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
185-8815 Lighting Gp-Flood
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***69 | Lamp Group-Flood; (Front) | 4 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
190-2799 Lighting Gp-Roading
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 15***63 | Wedge-Plug Lock; (6-Pin) | 1 |
| 15***74 | Kit-Connecting Plug; (6-Pin)(Cat Electronic Display Harness) | 2 |
190-2800 Lighting Gp-Roading
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 15***63 | Wedge-Plug Lock; (6-Pin) | 2 |
| 15***74 | Kit-Connecting Plug; (6-Pin)(Cat Electronic Display Harness) | 2 |
191-6552 Lighting Gp-Roading
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 13***15 | Bracket; (Rh) | 1 |
| 13***16 | Bracket; (Rh) | 1 |
191-6553 Lighting Gp-Roading
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 13***15 | Bracket; (Rh) | 1 |
| 13***16 | Bracket; (Rh) | 1 |
141-8292 Lighting Gp-Warning Beacon -Fixed Mount
| 11***16 | Bracket As-Rh | 1 |
| 13***11 | Screw; (M6x1x35-mm)(M6x1.0x20mm) | 3 |
| 14***92 | Lighting Group-Warning Beacon; -Fixed Mount | 1 |
104-9502 Lighting Gp-Warning Beacon
| 10***02 | Lighting Group-Warning Beacon | 1 |
| 10***04 | Plate | 1 |
| 13***42 | Screw-Self-Tapping; (M5x2.3x18.8-mm) | 3 |
189-5746 Sensor Gp-Speed -Transmission
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 2 |
| 17***49 | Strap; (Marker) | 1 |
148-9687 Starting Aid Gp -Lines
| 06***98 | Nut; (3/8-24-Thd) | 1 |
| 06***99 | Ferrule | 1 |
| 10***85 | Clip | 1 |
219-2343 Starting Aid Gp -Lines
| 06***98 | Nut; (3/8-24-Thd) | 1 |
| 06***99 | Ferrule | 1 |
| 10***83 | Nut; (3/16), . Drum | 1 |
143-0539 Starting Motor Gp-Electric -12-Volt
| 10***85 | Cap-Starting Motor | 1 |
| 10***12 | Kit-Contact; (Starting Motor) | 1 |
| 10***13 | Switch As; (Starting Motor)(12-Volt) | 1 |
112-1767 Starting Motor Gp-Electric
| 11***67 | Starting Motor Group-Electric | 1 |
| 14***39 | Starting Motor Group-Electric; -12-Volt | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 3 |
130-4653 Switch Gp-Pressure
| 03***63 | Plug | 1 |
| 13***53 | Switch Group-Pressure; -Engine Oil | 1 |
| 25***10 | Switch As-Pressure; (Engine Oil) | 1 |
193-2343 Warning Gp-Backup
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***27 | Screw-Machine; (M6x1x30-mm) | 1 |
| 15***28 | Alarm As; (Backup) | 1 |
202-6107 Wiring Gp-Air Conditioner
| 12***37 | Lamp; (12-Volt) | 1 |
| 13***24 | Seal | 1 |
| 18***70 | Tachometer As; (12-Volt) | 1 |
186-2730 Wiring Gp-Air Conditioner
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
185-8809 Wiring Gp-Autoshift
| 09***56 | Screw-Machine; (M5x0.8x16-mm) | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
186-0306 Wiring Gp-Cab
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***91 | Fuse; (15-Ampere) | 1 |
| 14***39 | Relay As | 1 |
185-8802 Wiring Gp-Cab -Turn Signal
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***98 | Bolt-Socket Head; (M5x0.8x12-mm) | 3 |
| 13***94 | Switch As-Rocker; (Turn Signal)(Turn Signal) | 1 |
185-8801 Wiring Gp-Cab
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***92 | Fuse; (20 Amp) | 2 |
| 14***59 | Fuse; (5-Ampere) | 1 |
194-1950 Wiring Gp-Cab
| 10***04 | Suppressor As-Arc | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***90 | Fuse; (10 Amp) | 1 |
169-0624 Wiring Gp-Console
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
186-0309 Wiring Gp-Console -All Wheel Drive
| 10***04 | Suppressor As-Arc | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***59 | Fuse; (5-Ampere) | 1 |
169-0625 Wiring Gp-Console
| 09***41 | Screw; (Machine) (M6x1thd) | 2 |
| 09***92 | Locknut; (M6x1-Thd) | 2 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
169-0623 Wiring Gp-Console
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***91 | Anchor | 1 |
| 13***89 | Clip; (Ladder) | 3 |
185-8803 Wiring Gp-Engine
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 0 |
186-2731 Wiring Gp-Heater
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 13***54 | Screw-Truss Head; (M4x0.7x10-mm) | 1 |
| 16***05 | Switch As-Rocker; (Blower Fan Speed)(Heater Fan Speed) | 1 |
122-1645 Wiring Gp-Kickout & Positioner
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 0 |
| 10***05 | Harness As-Wiring; (Kickout, Positioner)(Sensor) | 1 |
| 11***90 | Bracket As | 1 |
186-0304 Wiring Gp-Platform -Service
| 18***81 | Harness As-Platform; (Service Connector) | 1 |
| 18***04 | Wiring Group-Platform; -Service | 1 |
| 22***93 | Bolt-Socket Head; (M3x0.5-Thd) | 4 |
185-8800 Wiring Gp-Platform
| 09***33 | Screw-Machine; (M4x0.7x40-mm) | 8 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
190-7557 Wiring Gp-Power Receptacle
| 11***90 | Fuse; (10 Amp) | 1 |
| 17***39 | Receptacle As; (Power Supply) | 1 |
| 19***57 | Wiring Group-Power Receptacle | 1 |
197-7619 Wiring Gp-Rear -Center Pivot
| 13***89 | Clip; (Ladder) | 1 |
| 15***86 | Screw; (M4x0.7x16-mm) | 1 |
| 15***22 | Mount | 1 |
185-8807 Wiring Gp-Rear
| 09***15 | Lockwasher | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 4 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
186-0312 Wiring Gp-Ride Control -Autoshift
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Suppressor As-Arc | 2 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
194-1947 Wiring Gp-Ride Control
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Suppressor As-Arc | 2 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
194-1949 Wiring Gp-Ride Control -French
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Suppressor As-Arc | 2 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
186-0311 Wiring Gp-Ride Control
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
194-1948 Wiring Gp-Ride Control -Autoshift
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Suppressor As-Arc | 2 |
| 11***90 | Fuse; (10 Amp) | 1 |
186-0305 Wiring Gp-Ride Control
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Suppressor As-Arc | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
186-0308 Wiring Gp-Stabilizer
| 11***90 | Fuse; (10 Amp) | 1 |
| 17***03 | Relay As-Timer; (Stabilizer, Auto Up, 12-Volt) | 1 |
| 18***08 | Wiring Group-Stabilizer; -Auto Up | 1 |
186-0307 Wiring Gp-Stabilizer Alarm
| 13***85 | Alarm-Warning; (Stabilizer) | 1 |
| 17***00 | Suppressor-Arc | 1 |
| 18***07 | Wiring Group-Stabilizer Alarm; -Warning | 1 |
Engine Arrangement
186-0601 Engine Ar
| 16***58 | Lines Group-Air | 1 |
| 18***03 | Wiring Group-Engine | 1 |
| 18***01 | Engine Ar | 1 |
187-8014 Engine Ar-Primary
| 13***22 | Flywheel Group | 1 |
| 13***27 | Mounting Group-Alternator | 1 |
| 13***46 | Fitting Group-Fuel Lines | 1 |
204-5369 Engine Ar-Primary
| 13***22 | Flywheel Group | 1 |
| 13***27 | Mounting Group-Alternator | 1 |
| 13***46 | Fitting Group-Fuel Lines | 1 |
185-1887 Installation Ar-Engine
| 11***67 | Starting Motor Group-Electric | 1 |
| 12***69 | Gauge Group-Oil Level & Filler; -With Filter | 1 |
| 18***87 | Installation Ar-Engine | 1 |
Frame And Body
188-0859 Box Gp-Battery -Power Shift
| 11***42 | Door Group-Battery | 1 |
| 11***54 | Tread | 1 |
| 13***62 | Cover | 1 |
188-0860 Box Gp-Battery
| 11***42 | Door Group-Battery | 1 |
| 11***54 | Tread | 1 |
| 16***76 | Step As | 1 |
112-1809 Bumper Gp-Front
| 11***09 | Bumper Group-Front | 1 |
| 11***95 | Bumper As | 1 |
| 7X***72 | Washer-Hard; (24x44.5x6-mm Thk) | 4 |
106-5878 Counterweight Gp
| 10***78 | Counterweight Group | 1 |
| 11***17 | Counterweight; (145-Kg (319-Lb)) | 1 |
| 8C***78 | Bolt-Plt; (M20 X 2.5 X 140) | 4 |
120-8482 Counterweight Gp
| 11***17 | Counterweight; (145-Kg (319-Lb)) | 1 |
| 11***18 | Counterweight; (104-Kg (229-Lb)) | 1 |
| 11***62 | U-Bolt | 2 |
106-5880 Counterweight Gp
| 10***80 | Counterweight Group | 1 |
| 11***17 | Counterweight; (145-Kg (319-Lb)) | 1 |
| 11***18 | Counterweight; (104-Kg (229-Lb)) | 2 |
106-5881 Counterweight Gp
| 10***81 | Counterweight Group | 1 |
| 11***17 | Counterweight; (145-Kg (319-Lb)) | 1 |
| 11***18 | Counterweight; (104-Kg (229-Lb)) | 3 |
106-5879 Counterweight Gp
| 10***79 | Counterweight Group | 1 |
| 11***17 | Counterweight; (145-Kg (319-Lb)) | 1 |
| 11***18 | Counterweight; (104-Kg (229-Lb)) | 1 |
118-6842 Door Gp-Battery
| 11***42 | Door Group-Battery | 1 |
| 12***41 | Latch As-T-Bar | 1 |
| 15***63 | Door As | 1 |
162-3996 Fender Gp-Front
| 16***96 | Fender Group-Front | 1 |
| 16***98 | Fender As; (Lh) | 1 |
| 16***99 | Fender As; (Rh) | 1 |
164-1148 Fender Gp-Rear
| 15***83 | Washer-Hard; (8.4x35x2.5-mm Thk) | 14 |
| 16***48 | Fender Group-Rear | 1 |
| 16***53 | Fender; (Rh) | 1 |
185-0079 Floorplate Gp
| 11***90 | Mount As | 2 |
| 16***03 | Plate | 1 |
| 18***29 | Floorplate | 1 |
185-0077 Floorplate Gp
| 11***90 | Mount As | 2 |
| 16***03 | Plate | 1 |
| 18***77 | Floorplate Group | 1 |
186-6159 Frame As-Loader
| 10***60 | Bearing-Sleeve | 1 |
| 13***27 | Plate As | 1 |
| 13***33 | Bracket As | 2 |
185-8839 Frame Gp-Loader
| 11***99 | Bolt; (M24x3x80-mm) | 6 |
| 18***39 | Frame Group-Loader | 1 |
| 18***59 | Frame As-Loader | 1 |
183-6056 Frame Gp-Swing
| 10***15 | Bracket | 1 |
| 10***16 | Plate As | 1 |
| 10***20 | Pin As; (428b-438b) | 1 |
135-4744 Guard Gp-Cylinder -Stabilizer
| 13***40 | Guard As | 2 |
| 13***44 | Guard Group-Cylinder; -Stabilizer | 1 |
| 14***89 | Latch | 4 |
133-3361 Guard Gp-Cylinder -Stabilizer
| 13***38 | Pin | 2 |
| 13***40 | Guard As | 2 |
| 13***61 | Guard Group-Cylinder; -Stabilizer | 1 |
9r-1233 Guard Gp-Drive Shaft -All Wheel Drive-All Wheel Steer
| 21***81 | Guard As | 1 |
| 8T***83 | Bolt (M12x1.75x40mm); (M12x1.75x40-mm) | 4 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 4 |
185-8842 Hood & Guard Gp
| 11***15 | Bumper As | 2 |
| 11***16 | Guard As | 1 |
| 12***28 | Bar | 2 |
190-5124 Hood Gp-Engine
| 11***61 | Spring As-Gas | 2 |
| 11***72 | Hinge As; (Lh)(Lh) | 2 |
| 11***73 | Hinge As; (Rh)(Rh) | 2 |
145-0920 Liner Gp-Sound Suppression
| 14***18 | Insulation-Rh | 1 |
| 14***19 | Insulation-Lh | 1 |
| 14***20 | Liner Group-Sound Suppression | 1 |
152-0185 Reflector Gp
| 15***85 | Reflector Group | 1 |
| 9R***04 | Reflector-Amber | 4 |
Fuel System
164-1076 Control Gp-Governor
| 09***47 | Nut-Thin; (M16x2 Thd) | 2 |
| 11***25 | Screw-Flat Head; (M6x1x25-mm) | 4 |
| 13***47 | Spring | 1 |
197-3924 Filter & Lines Gp-Fuel
| 06***68 | Nut-Fuel Line; (1/2-In) | 6 |
| 06***69 | Olive-Fuel Tube | 6 |
| 06***98 | Nut; (3/8-24-Thd) | 2 |
138-3096 Filter Gp-Fuel
| 10***39 | Nut | 1 |
| 10***40 | Cap; (Fuel Filter) | 1 |
| 10***41 | Seal; (Plunger) | 1 |
130-7092 Filter Gp-Water Sep & Fuel
| 11***18 | Ring-Retaining | 1 |
| 11***19 | Nut | 1 |
| 12***80 | Kit-Water Base; (Water Separator) | 1 |
130-4646 Fitting Gp-Fuel Lines
| 06***68 | Nut-Fuel Line; (1/2-In) | 1 |
| 06***69 | Olive-Fuel Tube | 1 |
| 13***46 | Fitting Group-Fuel Lines | 1 |
197-3917 Pump Gp-Fuel Injection
| 03***63 | Plug | 1 |
| 06***98 | Nut; (3/8-24-Thd) | 1 |
| 06***99 | Ferrule | 2 |
186-0204 Separator Gp-Water
| 03***00 | Washer; (0.531x0.718x0.064-In Thk) | 2 |
| 03***49 | Plug | 2 |
| 12***67 | Clip | 2 |
179-8291 Separator Gp-Water
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***18 | Ring-Retaining | 1 |
| 11***19 | Nut | 1 |
7e-4636 Separator Gp-Water
| 03***00 | Washer; (0.531x0.718x0.064-In Thk) | 2 |
| 03***49 | Plug | 2 |
| 12***67 | Clip | 2 |
190-1117 Tank & Mtg Gp-Fuel
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***46 | Tread | 1 |
| 12***50 | Screw-Pan Head; (M6x1x16-mm) | 5 |
195-5656 Tank Gp-Fuel
| 10***20 | Gasket | 1 |
| 11***48 | Plate | 1 |
| 12***50 | Screw-Pan Head; (M6x1x16-mm) | 8 |
Hydraulic System
9t-5455 Valve Gp-Load Control -Tilt
| 10***27 | Valve Group-Sequence | 1 |
| 10***30 | Valve Group-Check | 1 |
| 15***50 | Valve Group-Load Control | 1 |
103-5519 Valve Gp-Pump Control -Power Compensator
| 03***44 | Seal-O-Ring | 1 |
| 10***19 | Valve Group-Power Compensator; -Power Compensator | 1 |
| 10***34 | Plug | 1 |
162-3960 Accumulator Gp-Ride Control -Charged
| 15***06 | Valve-Gas | 1 |
| 16***96 | Service Kit; (Includes Seals) | 1 |
| 16***60 | Accumulator Group-Ride Control; -Charged | 1 |
195-0255 Accumulator Gp-Stabilizer
| 10***96 | Clip | 2 |
| 14***07 | Adapter As | 1 |
| 14***86 | Accumulator Group-Hydraulic; -Charged | 1 |
202-5949 Connector Gp-Valve
| 10***87 | Tee As | 1 |
| 14***16 | Connector Group | 1 |
| 14***27 | Connector Group | 1 |
170-0606 Connector Gp-Valve
| 14***27 | Connector Group | 2 |
| 14***28 | Connector Assem. | 2 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
186-0945 Control Ar-Hydraulic
| 18***00 | Mounting Group-Backhoe Control; -Backhoe | 1 |
| 18***71 | Lines Group-Pilot; -Backh0e | 1 |
| 18***15 | Control Group-Joystick; -Rh | 1 |
186-0948 Control Ar-Hydraulic
| 18***00 | Mounting Group-Backhoe Control; -Backhoe | 1 |
| 18***15 | Control Group-Joystick; -Rh | 1 |
| 18***16 | Control Group-Joystick; -Lh | 1 |
186-0942 Control Ar-Hydraulic
| 18***00 | Mounting Group-Backhoe Control; -Backhoe | 1 |
| 18***99 | Lines Group-Pilot; -Backhoe | 1 |
| 18***15 | Control Group-Joystick; -Rh | 1 |
184-7954 Control Ar-Ride -Autoshift
| 18***54 | Control Ar-Ride; -Autoshift, Dead Engine Lower | 1 |
| 19***48 | Wiring Group-Ride Control; -Autoshift | 1 |
| 19***84 | Lines Group-Ride Control | 1 |
185-1482 Control Ar-Ride
| 18***82 | Control Ar-Ride; -Standard Shift | 1 |
| 18***11 | Wiring Group-Ride Control | 1 |
| 19***84 | Lines Group-Ride Control | 1 |
194-3484 Control Ar-Ride -Standard Shift
| 19***47 | Wiring Group-Ride Control | 1 |
| 19***84 | Control Ar-Ride; -Standard Shift | 1 |
| 19***84 | Lines Group-Ride Control | 1 |
184-7949 Control Ar-Ride -Autoshift
| 18***49 | Control Ar-Ride; -Autoshift | 1 |
| 18***12 | Wiring Group-Ride Control; -Autoshift | 1 |
| 19***84 | Lines Group-Ride Control | 1 |
194-3485 Control Ar-Ride -French
| 18***05 | Wiring Group-Ride Control | 1 |
| 19***85 | Control Ar-Ride; -French | 1 |
| 19***84 | Lines Group-Ride Control | 1 |
194-3486 Control Ar-Ride -French
| 19***49 | Wiring Group-Ride Control; -French | 1 |
| 19***86 | Control Ar-Ride; -French | 1 |
| 19***84 | Lines Group-Ride Control | 1 |
200-7924 Control Ar-Ride
| 17***14 | Film; (Ride Control) | 2 |
| 18***05 | Wiring Group-Ride Control | 1 |
| 20***63 | Lines Group-Ride Control; -Kit | 1 |
198-7412 Conversion Gp-Control Valve
| 10***17 | Stud; (3/8-16-Thd) | 3 |
| 19***50 | Valve Group-Control; -Extendable Stick;Auxiliary | 1 |
| 19***12 | Conversion Group-Control Valve; -4-Bank, 5-Bank | 1 |
201-6902 Conversion Gp-Control Valve -Kit
| 11***16 | Stud; (3/8-16-2a Thd X 393.7mm) | 3 |
| 19***50 | Valve Group-Control; -Extendable Stick;Auxiliary | 1 |
| 20***02 | Conversion Group-Control Valve; -5-Bank, 6-Bank Valve | 1 |
191-7835 Cylinder Gp-Backhoe Bucket
| 16***32 | Rod As | 1 |
| 16***41 | Piston | 1 |
| 16***07 | Seal As-Buffer | 1 |
166-8140 Cylinder Gp-Backhoe Bucket
| 16***32 | Rod As | 1 |
| 16***35 | Cylinder As | 1 |
| 16***40 | Cylinder Group-Backhoe Bucket | 1 |
191-7839 Cylinder Gp-Backhoe Bucket
| 16***31 | Rod As | 1 |
| 16***51 | Piston | 1 |
| 16***07 | Seal As-Buffer | 1 |
206-3630 Cylinder Gp-Boom
| 15***51 | Piston | 1 |
| 15***48 | Rod As | 1 |
| 16***02 | Seal As-Buffer | 1 |
191-7846 Cylinder Gp-Boom
| 15***51 | Piston | 1 |
| 15***48 | Rod As | 1 |
| 16***02 | Seal As-Buffer | 1 |
152-9148 Cylinder Gp-Boom
| 15***48 | Cylinder Group-Boom | 1 |
| 15***81 | Cylinder As | 1 |
| 15***50 | Head | 1 |
164-7174 Cylinder Gp-Extendable Stick
| 16***74 | Cylinder Group-Extendable Stick | 1 |
| 16***75 | Cylinder As | 1 |
| 16***76 | Rod As | 1 |
155-6586 Cylinder Gp-Extendable Stick
| 15***86 | Cylinder Group-Extendable Stick | 1 |
| 16***51 | Lines Group-Extendable Stick | 1 |
| 16***74 | Cylinder Group-Extendable Stick | 1 |
191-7725 Cylinder Gp-Extendable Stick
| 16***76 | Rod As | 1 |
| 16***86 | Seal As-Buffer | 1 |
| 16***94 | Seal-U-Cup | 1 |
183-2856 Cylinder Gp-Lift
| 11***91 | Rod As | 1 |
| 14***11 | Ring-Wear | 1 |
| 16***95 | Seal As-Buffer | 1 |
196-4523 Cylinder Gp-Lift
| 11***91 | Rod As | 1 |
| 14***11 | Ring-Wear | 1 |
| 16***95 | Seal As-Buffer | 1 |
185-1839 Cylinder Gp-Multipurpose Bukt
| 16***86 | Seal As-Buffer | 1 |
| 16***94 | Seal-U-Cup | 1 |
| 18***39 | Cylinder Group-Multipurpose Bukt | 1 |
206-0520 Cylinder Gp-Stabilizer
| 16***97 | Seal As-Buffer | 1 |
| 16***05 | Seal-U-Cup | 1 |
| 17***53 | Piston | 1 |
206-0522 Cylinder Gp-Stabilizer
| 16***97 | Seal As-Buffer | 1 |
| 16***05 | Seal-U-Cup | 1 |
| 17***53 | Piston | 1 |
180-7484 Cylinder Gp-Stabilizer -Lh
| 16***97 | Seal As-Buffer | 1 |
| 16***05 | Seal-U-Cup | 1 |
| 16***58 | Seal-Wiper | 1 |
180-7485 Cylinder Gp-Stabilizer -Rh
| 16***97 | Seal As-Buffer | 1 |
| 16***05 | Seal-U-Cup | 1 |
| 16***58 | Seal-Wiper | 1 |
206-0503 Cylinder Gp-Stick
| 13***59 | Rod As | 1 |
| 16***01 | Seal As-Buffer | 1 |
| 16***12 | Seal-U-Cup | 1 |
184-3709 Cylinder Gp-Stick
| 13***59 | Rod As | 1 |
| 16***01 | Seal As-Buffer | 1 |
| 16***12 | Seal-U-Cup | 1 |
191-8161 Cylinder Gp-Swing
| 10***82 | Washer; (11x19.5x2.5-mm Thk) | 1 |
| 11***73 | Piston | 1 |
| 12***94 | Rod As | 1 |
169-9529 Cylinder Gp-Swing
| 10***82 | Washer; (11x19.5x2.5-mm Thk) | 1 |
| 11***73 | Piston | 1 |
| 11***57 | Cylinder As | 1 |
180-7482 Cylinder Gp-Tilt
| 14***11 | Ring-Wear | 1 |
| 16***95 | Seal As-Buffer | 1 |
| 16***04 | Seal-U-Cup | 1 |
206-3555 Cylinder Gp-Tilt
| 14***11 | Ring-Wear | 1 |
| 16***95 | Seal As-Buffer | 1 |
| 16***04 | Seal-U-Cup | 1 |
192-4110 Cylinder Gp-Tilt
| 14***11 | Ring-Wear | 1 |
| 16***95 | Seal As-Buffer | 1 |
| 16***04 | Seal-U-Cup | 1 |
200-7128 Cylinder Gp-Tilt
| 11***73 | Piston | 1 |
| 16***95 | Seal As-Buffer | 1 |
| 16***04 | Seal-U-Cup | 1 |
112-1826 Drive & Mtg Gp-Pump
| 11***26 | Drive & Mtg Group-Pump | 1 |
| 11***18 | Plate | 1 |
| 11***34 | Adapter | 1 |
132-8769 Fitting Gp-Hydraulic -Quick Disconnect
| 10***01 | Fitting; (Quick Disconnect, Female) | 1 |
| 10***06 | Fitting; (Quick Disconnect, Male) | 1 |
| 13***69 | Fitting Group-Hydraulic; -Quick Disconnect | 1 |
196-8996 Hydraulic Ar -Kit
| 19***78 | Lines Group-Backhoe Auxiliary, Washer; Drive End Shaft | 1 |
| 19***96 | Hydraulic Ar; -Kit | 1 |
186-5336 Hydraulic Ar -General Purpose Bucket-Locks
| 13***58 | Housing-Switch | 1 |
| 13***59 | Housing-Detent | 1 |
| 13***79 | Switch As; (Hydraulic Locks) | 1 |
186-5335 Hydraulic Ar -General Purpose Bucket
| 16***71 | Lines Group-Lift Cylinder; -Bank Valve | 1 |
| 16***63 | Boot | 1 |
| 18***98 | Mounting Group-Bank Valve; -Loader, Mechanical | 1 |
198-6682 Hydraulic Ar -Kit
| 17***27 | Lines Group-Backhoe Auxiliary | 1 |
| 18***83 | Control Group-Hydraulic Pedal; -Extendable Stick | 1 |
| 18***56 | Plate As | 1 |
196-8991 Hydraulic Ar -Kit
| 19***61 | Lines Group-Backhoe Auxiliary | 1 |
| 19***91 | Hydraulic Ar; -Kit | 1 |
186-5337 Hydraulic Ar -Multipurpose Bucket
| 10***76 | Lines Group-Loader Auxiliary | 1 |
| 16***71 | Lines Group-Lift Cylinder; -Bank Valve | 1 |
| 16***64 | Boot | 1 |
186-5338 Hydraulic Ar -Multipurpose Bucket-Locks
| 10***76 | Lines Group-Loader Auxiliary | 1 |
| 13***58 | Housing-Switch | 1 |
| 13***59 | Housing-Detent | 1 |
184-7957 Hydraulic Ar
| 11***26 | Drive & Mtg Group-Pump | 1 |
| 15***48 | Cylinder Group-Boom | 1 |
| 16***34 | Tank & Mtg Group-Hydraulic | 1 |
186-4960 Installation Ar-Bank Valve -Six
| 14***08 | Plug As. | 2 |
| 18***30 | Valve Group-Bank 6 | 1 |
| 18***83 | Control Group-Hydraulic Pedal; -Extendable Stick | 1 |
186-4959 Installation Ar-Bank Valve -Five
| 14***08 | Plug As. | 2 |
| 18***29 | Valve Group-Bank 5 | 1 |
| 18***83 | Control Group-Hydraulic Pedal; -Extendable Stick | 1 |
186-4958 Installation Ar-Bank Valve -Four
| 18***27 | Valve Group-Bank 4 | 1 |
| 18***79 | Floorplate Group | 1 |
| 18***58 | Installation Ar-Bank Valve; -Four | 1 |
106-9046 Kickout & Positioner Gp
| 10***01 | Rod As | 1 |
| 10***46 | Kickout & Positioner Group | 1 |
| 11***94 | Lever As | 1 |
200-6284 Kit-Ride Control
| 17***14 | Film; (Ride Control) | 2 |
| 18***11 | Wiring Group-Ride Control | 1 |
| 19***84 | Lines Group-Ride Control | 1 |
200-6285 Kit-Ride Control
| 17***14 | Film; (Ride Control) | 2 |
| 18***12 | Wiring Group-Ride Control; -Autoshift | 1 |
| 19***84 | Lines Group-Ride Control | 1 |
171-2428 Lines Gp-Backhoe Auxiliary
| 10***63 | Film-Instruction; (Return Flow)(Return Flow Direction) | 2 |
| 10***09 | Hose As | 1 |
| 10***08 | Bracket; (Lh) | 1 |
194-1978 Lines Gp-Backhoe Auxiliary
| 10***63 | Film-Instruction; (Return Flow)(Return Flow Direction) | 2 |
| 10***09 | Hose As | 1 |
| 10***25 | Plate As; (Work Tool Rest) | 1 |
196-8861 Lines Gp-Backhoe Auxiliary
| 10***63 | Film-Instruction; (Return Flow)(Return Flow Direction) | 2 |
| 10***25 | Plate As; (Work Tool Rest) | 1 |
| 10***08 | Bracket; (Lh) | 1 |
171-2429 Lines Gp-Backhoe Auxiliary
| 10***62 | Plate-Warning; (Secure Extendable Stick) | 2 |
| 10***63 | Film-Instruction; (Return Flow)(Return Flow Direction) | 2 |
| 10***09 | Hose As | 1 |
171-2427 Lines Gp-Backhoe Auxiliary
| 14***28 | Connector Assem. | 2 |
| 16***35 | Hose As | 2 |
| 17***27 | Lines Group-Backhoe Auxiliary | 1 |
167-8270 Lines Gp-Boom -Cylinder
| 14***27 | Connector Group | 1 |
| 16***70 | Lines Group-Boom; -Cylinder | 1 |
| 16***78 | Hose As | 1 |
167-8275 Lines Gp-Bucket
| 14***62 | Elbow Group | 1 |
| 14***55 | Union As | 1 |
| 14***57 | Union Bulkhead; (Orfs) | 1 |
9r-5788 Lines Gp-Multipurpose Bucket
| 10***43 | Hose As | 1 |
| 10***44 | Hose As | 1 |
| 13***27 | Hose Assem. | 1 |
9r-3712 Lines Gp-Multipurpose Bucket
| 10***42 | Hose As | 1 |
| 11***20 | Hose As | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 4 |
162-2351 Lines Gp-Extendable Stick
| 16***51 | Lines Group-Extendable Stick | 1 |
| 16***53 | Tube As | 1 |
| 16***54 | Tube As | 1 |
167-8276 Lines Gp-Extendable Stick
| 14***28 | Connector Assem. | 2 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 16***26 | Hose As | 1 |
200-4153 Lines Gp-Lift Cylinder
| 12***13 | Tube As | 1 |
| 12***14 | Tube As | 1 |
| 14***90 | Elbow Group | 2 |
163-9371 Lines Gp-Lift Cylinder -Bank Valve
| 11***25 | Tube As | 1 |
| 11***28 | Tube As | 1 |
| 12***24 | Hose As | 4 |
183-8559 Lines Gp-Load Control Valve -Lift, Tilt
| 08***52 | Adaptor | 1 |
| 11***25 | Tube As | 1 |
| 11***28 | Tube As | 1 |
185-6159 Lines Gp-Load Control Valve -Backhoe
| 14***22 | Adapter; (-10orb/-12orfs) | 1 |
| 14***25 | Connector As. | 1 |
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 1 |
106-5876 Lines Gp-Loader Auxiliary
| 10***76 | Lines Group-Loader Auxiliary | 1 |
| 11***16 | Tube As | 1 |
| 11***17 | Tube As | 1 |
186-4168 Lines Gp-Pilot -Stabilizer
| 12***13 | Tee-O-Ring | 1 |
| 14***58 | Connector | 1 |
| 14***25 | Connector As. | 5 |
188-9098 Lines Gp-Pilot
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 13***13 | Band; (Marker) (Gray, P) | 6 |
| 14***16 | Connector Group | 1 |
202-5928 Lines Gp-Pilot -Stabilizer
| 12***13 | Tee-O-Ring | 1 |
| 14***58 | Connector | 1 |
| 14***25 | Connector As. | 7 |
185-6248 Lines Gp-Pilot -Backhoe
| 14***16 | Connector Group | 4 |
| 14***25 | Connector As. | 12 |
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 2 |
219-4817 Lines Gp-Pilot
| 14***19 | Reducer As | 1 |
| 20***46 | Adapter | 1 |
| 20***47 | Adapter As | 1 |
185-3171 Lines Gp-Pilot
| 14***16 | Connector Group | 6 |
| 14***25 | Connector As. | 12 |
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 5 |
185-1599 Lines Gp-Pilot -Backhoe
| 14***25 | Connector As. | 12 |
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 2 |
| 14***85 | Elbow; (45°) | 8 |
191-5462 Lines Gp-Pump
| 14***57 | Elbow As. | 1 |
| 14***29 | Tee As-Orfs | 1 |
| 19***62 | Lines Group-Pump | 1 |
191-3804 Lines Gp-Pump
| 14***35 | Connect Group; (Each Includes) | 1 |
| 14***29 | Tee As-Orfs | 1 |
| 19***63 | Hose As | 1 |
191-3761 Lines Gp-Pump
| 05***58 | "P" Clip | 1 |
| 11***45 | Clamp-Hose | 4 |
| 11***77 | Bracket As | 1 |
190-8954 Lines Gp-Pump
| 10***87 | Tee As | 1 |
| 12***04 | Hose As | 1 |
| 14***16 | Connector Group | 3 |
176-9209 Lines Gp-Return
| 14***29 | Tee As-Orfs | 1 |
| 17***09 | Lines Group-Return | 1 |
| 17***80 | Valve Group-Check; -Return Oil | 1 |
176-9208 Lines Gp-Return
| 14***29 | Tee As-Orfs | 1 |
| 16***44 | Hose As | 1 |
| 17***08 | Lines Group-Return | 1 |
197-6818 Lines Gp-Return
| 14***29 | Tee As-Orfs | 1 |
| 16***44 | Hose As | 1 |
| 17***81 | Valve Group-Check; -Back Pressure | 1 |
200-3063 Lines Gp-Ride Control -Kit
| 10***30 | Film; (Warning) (Accumulator Pressure) (On Bracket Covering Brake Accumulator) | 1 |
| 10***33 | Clip; (Slot) | 2 |
| 10***34 | Clip; (Tab) | 2 |
195-1284 Lines Gp-Ride Control
| 10***33 | Clip; (Slot) | 2 |
| 10***34 | Clip; (Tab) | 2 |
| 14***16 | Connector Group | 1 |
185-9750 Lines Gp-Stabilizer
| 14***78 | Bracket As | 2 |
| 14***27 | Connector Group | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 2 |
185-3413 Lines Gp-Stabilizer
| 13***23 | Tube As | 1 |
| 13***24 | Tube As | 1 |
| 14***27 | Connector Group | 1 |
167-8273 Lines Gp-Stick
| 14***41 | Connector Group | 1 |
| 16***73 | Lines Group-Stick | 1 |
| 16***80 | Hose As | 1 |
202-5723 Lines Gp-Swing
| 14***25 | Connector As. | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 4 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 2 |
167-8264 Lines Gp-Swing
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 4 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 2 |
| 16***64 | Lines Group-Swing | 1 |
189-0555 Lines Gp-Tilt Cylinder
| 12***22 | Bracket As | 1 |
| 14***41 | Connector Group | 2 |
| 14***90 | Elbow Group | 1 |
239-2226 Manifold Gp-Control
| 19***75 | Valve Group-Check | 1 |
| 19***80 | Spring | 1 |
| 19***12 | Seal-O-Ring | 1 |
190-8315 Manifold Gp-Ride Control
| 14***46 | Kit-Seal; (Valve) | 1 |
| 16***69 | Orifice As | 2 |
| 17***75 | Valve Group-Solenoid | 1 |
185-1598 Mounting Gp-Bank Valve -Loader, Mechanical
| 18***98 | Mounting Group-Bank Valve; -Loader, Mechanical | 1 |
| 19***54 | Spacer; (11.8x20x45-mm Thk) | 2 |
| 8T***89 | Locknut; (M10x1.15-Thd) | 2 |
185-3165 Mounting Gp-Bank Valve -Backhoe
| 10***80 | Boss | 1 |
| 16***19 | Bolt; (M12x1.75x45-mm) | 1 |
| 18***65 | Mounting Group-Bank Valve; -Backhoe | 1 |
9r-4668 Mounting Gp-Cylinder -Multipurpose Bucket
| 3B***17 | Cotter; (Pin) | 4 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 4 |
| 9R***68 | Mounting Group-Bucket Cylinder; -Multipurpose Bucket | 1 |
172-3190 Mounting Gp-Lines
| 12***97 | Plate; (19.79mm Id) | 1 |
| 17***90 | Mounting Group-Lines | 1 |
| 17***48 | Block | 2 |
171-2101 Mounting Gp-Lines
| 12***97 | Plate; (19.79mm Id) | 1 |
| 17***01 | Mounting Group-Lines; -Boom Cylinder | 1 |
| 17***63 | Block | 2 |
220-5623 Pump Gp-Piston
| 08***19 | Pin | 1 |
| 09***05 | Bolt-Socket Head; (M14x2x40-mm) | 4 |
| 10***19 | Valve Group-Power Compensator; -Power Compensator | 1 |
185-5918 Pump Gp-Piston
| 08***19 | Pin | 1 |
| 09***05 | Bolt-Socket Head; (M14x2x40-mm) | 4 |
| 10***19 | Valve Group-Power Compensator; -Power Compensator | 1 |
215-2876 Pump Gp-Piston
| 08***19 | Pin | 1 |
| 09***05 | Bolt-Socket Head; (M14x2x40-mm) | 4 |
| 10***20 | Carrier-Pin | 1 |
120-5726 Rotating Gp-Pump
| 12***24 | Plate-Valve | 1 |
| 12***26 | Rotating Group-Pump; -Steering | 1 |
| 16***79 | Pin | 3 |
128-5596 Shaft Gp-Pump Drive
| 12***96 | Shaft Group-Pump Drive | 1 |
| 13***50 | Ring-Retaining | 1 |
186-3136 Stabilizer Ar -Auto Up
| 18***78 | Mounting Group-Stabilizer Control | 1 |
| 18***00 | Valve Group-Pilot; -Stabilizer | 1 |
| 18***07 | Wiring Group-Stabilizer Alarm; -Warning | 1 |
163-7934 Tank & Mtg Gp-Hydraulic
| 11***49 | Hose | 1 |
| 12***26 | Clamp | 2 |
| 12***67 | Cap-Filler | 1 |
185-9784 Valve & Mtg Gp-Bank -Stabilizer
| 18***98 | Valve Group-Bank 2; -Stabilizer | 1 |
| 18***84 | Valve & Mtg Group-Bank; -Stabilizer | 1 |
| 19***01 | Stud-Taperlock | 4 |
171-8777 Valve & Mtg Gp-Solenoid
| 17***70 | Manifold | 1 |
| 17***75 | Valve Group-Solenoid | 1 |
| 17***77 | Valve & Mtg Group-Solenoid; -Pilot Oil Shutoff-Hydraulic Lockout | 1 |
185-5898 Valve Gp-Bank 2
| 14***11 | Bolt-Socket Head; (M6x1x16-mm) | 16 |
| 18***98 | Valve Group-Bank 2; -Stabilizer | 1 |
| 19***26 | Cover-End | 1 |
185-5911 Valve Gp-Bank 2 -Loader
| 13***20 | Valve Group-Control; -Lift | 1 |
| 18***11 | Valve Group-Bank 2; -Loader | 1 |
| 18***71 | Valve Group-Priority; -Steering | 1 |
185-5912 Valve Gp-Bank 3 -Loader
| 12***18 | Valve Group-Control; -Auxiliary | 1 |
| 13***20 | Valve Group-Control; -Lift | 1 |
| 18***12 | Valve Group-Bank 3; -Loader | 1 |
180-9627 Valve Gp-Bank 4
| 18***27 | Valve Group-Bank 4 | 1 |
| 19***80 | Valve Group-Control; -Boom | 1 |
| 19***83 | Valve Group-Control; -Swing | 1 |
180-9629 Valve Gp-Bank 5
| 10***17 | Stud; (3/8-16-Thd) | 3 |
| 18***29 | Valve Group-Bank 5 | 1 |
| 19***50 | Valve Group-Control; -Extendable Stick;Auxiliary | 1 |
180-9630 Valve Gp-Bank 6
| 11***16 | Stud; (3/8-16-2a Thd X 393.7mm) | 3 |
| 18***30 | Valve Group-Bank 6 | 1 |
| 19***50 | Valve Group-Control; -Extendable Stick;Auxiliary | 2 |
159-7569 Valve Gp-Check
| 13***77 | Valve Group-Check | 1 |
| 14***58 | Disc-Orifice | 1 |
| 15***69 | Valve Group-Check | 1 |
178-7480 Valve Gp-Check -Return Oil
| 17***80 | Valve Group-Check; -Return Oil | 1 |
| 5K***90 | Seal-To Hydraulic Cooler Inlet Port | 1 |
| 7M***85 | Seal,Adapter,Motor Part Of Kit P/N 5r***29 | 1 |
178-7481 Valve Gp-Check -Back Pressure
| 17***81 | Valve Group-Check; -Back Pressure | 1 |
| 5K***90 | Seal-To Hydraulic Cooler Inlet Port | 2 |
| 7M***85 | Seal,Adapter,Motor Part Of Kit P/N 5r***29 | 1 |
130-6520 Valve Gp-Control -Lift
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 2 |
| 10***63 | Spacer-Detent | 1 |
| 10***64 | Spring | 1 |
191-4485 Valve Gp-Control -Stick
| 11***72 | Coupling | 1 |
| 11***73 | Coupling | 1 |
| 11***06 | Retainer Spring | 2 |
191-4012 Valve Gp-Control -Tilt
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***76 | Seat As-Shuttle | 1 |
191-4483 Valve Gp-Control -Swing
| 11***06 | Retainer Spring | 2 |
| 12***76 | Seat As-Shuttle | 1 |
| 12***96 | Valve Group-Check; (Primary Resolver) | 1 |
124-8818 Valve Gp-Control -Auxiliary
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 2 |
| 03***85 | Bolt 5t***57 Plate As To Fuel Pump Group | 1 |
| 12***18 | Valve Group-Control; -Auxiliary | 1 |
191-4484 Valve Gp-Control -Bucket
| 11***72 | Coupling | 1 |
| 11***73 | Coupling | 1 |
| 11***06 | Retainer Spring | 2 |
191-4480 Valve Gp-Control -Boom
| 00***37 | Seal-O-Ring | 2 |
| 11***72 | Coupling | 1 |
| 11***73 | Coupling | 1 |
190-3450 Valve Gp-Control
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 2 |
| 03***85 | Bolt 5t***57 Plate As To Fuel Pump Group | 1 |
| 12***76 | Seat As-Shuttle | 1 |
192-0827 Valve Gp-Control -Stabilizer
| 19***27 | Valve Group-Control; -Stabilizer | 1 |
| 19***28 | Valve Group-Compensating; (Stabilizer) | 1 |
| 19***60 | Cover As | 1 |
198-6555 Valve Gp-Pilot -Stabalizer
| 11***81 | Plate | 1 |
| 15***66 | Kit-Spring; (Pilot Valve) | 1 |
| 19***98 | Boot | 1 |
185-5900 Valve Gp-Pilot -Stabilizer
| 17***41 | Nut; (M8x6.5-mm) | 2 |
| 18***00 | Valve Group-Pilot; -Stabilizer | 1 |
| 19***15 | Kit-Seal; (Pilot Valve) | 1 |
198-6556 Valve Gp-Pilot -Stabilizer
| 11***81 | Plate | 1 |
| 15***66 | Kit-Spring; (Pilot Valve) | 1 |
| 19***98 | Boot | 1 |
213-9804 Valve Gp-Pump Control
| 03***43 | Seal-O-Ring | 1 |
| 10***45 | Valve-Orifice; (Hydraulic Oil Check) | 1 |
| 19***36 | Spring | 1 |
215-9232 Valve Gp-Pump Control
| 03***44 | Seal-O-Ring | 1 |
| 10***34 | Plug | 1 |
| 10***35 | Spring | 1 |
173-0640 Valve Gp-Pump Control -Pressure, Flow Compensator
| 03***43 | Seal-O-Ring | 1 |
| 10***45 | Valve-Orifice; (Hydraulic Oil Check) | 1 |
| 17***40 | Valve Group-Pump Control; -Pressure, Flow Compensator | 1 |
147-0209 Valve Gp-Relief
| 10***86 | Seal-O-Ring | 1 |
| 14***09 | Valve Group-Relief; -Pump Pressure-Pressure Regulator | 1 |
| 6V***78 | Seal-O-Ring; (25.12mm Id) | 1 |
164-2274 Valve Gp-Selector -2-Way
| 11***83 | Pin-Spring | 1 |
| 16***74 | Valve Group-Selector; -Joystick Pattern | 1 |
| 16***76 | Kit-Seal; (Select Valve) | 1 |
214-3523 Valve Gp-Shuttle
| 12***98 | Seat | 1 |
| 12***99 | Seat | 1 |
| 13***49 | Connector | 1 |
Implements
135-2876 Pad Gp-Stabilizer -Street
| 13***42 | Pad As-Stabilizer | 1 |
| 13***76 | Pad Group; -Street | 1 |
| 14***89 | Latch | 2 |
9r-0041 Stabilizer Gp-Backhoe
| 11***37 | Washer; (46x70x1-mm Thk)(1mm`Thk) | 2 |
| 11***94 | Washer; (41x64x1-mm Thk) | 2 |
| 13***77 | Stabilizer As | 2 |
129-9121 Arm Gp-Lift
185-1926 Boom Gp
| 10***21 | Boss-Threaded; (M12x1.75-Thd) | 2 |
| 10***24 | Plate | 1 |
| 10***25 | Plate As; (Work Tool Rest) | 1 |
185-1925 Boom Gp
| 10***21 | Boss-Threaded; (M12x1.75-Thd) | 2 |
| 10***24 | Plate | 1 |
| 11***83 | Boss; (M10x1.5-Thd) | 2 |
9r-0036 Brace Gp-Lift Cylinder
| 13***97 | Brace As; (Lift Cylinder) | 1 |
| 8C***47 | Film-Indicator (On Loader Lift Arm) | 1 |
| 9R***36 | Brace Group-Lift Cylinder | 1 |
184-6784 Housing As-Extendable Stick
| 10***11 | Block | 2 |
| 15***78 | Boss | 2 |
| 18***84 | Housing As-Extendable Stick | 1 |
151-7928 Linkage Gp-Backhoe Bucket
| 14***37 | Guide As; (Rh) | 1 |
| 14***44 | Guide As; (Lh) | 1 |
| 15***28 | Linkage Group-Backhoe Bucket | 1 |
9r-9140 Linkage Gp-Loader Bucket
| 10***17 | Plate | 1 |
| 10***47 | Guide As; (Rh) | 1 |
| 11***37 | Washer; (46x70x1-mm Thk)(1mm`Thk) | 10 |
177-4726 Lock Gp-Transport -Extendable Stick
| 17***26 | Lock Group-Transport; -Extendable Stick | 1 |
| 17***29 | Cable As | 1 |
| 9R***01 | Pin-Cotter | 2 |
177-4727 Lock Gp-Transport -Standard Stick
| 17***27 | Lock Group-Transport; -Standard Stick | 1 |
| 17***33 | Cable As | 1 |
| 9R***01 | Pin-Cotter | 2 |
183-6076 Lock Gp-Transport -Stabilizer
| 10***89 | Bolt; (M8x1.25x130-mm) | 2 |
| 16***95 | Knob | 1 |
| 18***51 | Bracket As | 1 |
122-8037 Lock Gp-Transport -Loader
| 11***90 | Pin As | 1 |
| 12***32 | Brace As | 1 |
| 12***37 | Lock Group-Transport; -Loader | 1 |
184-9950 Mounting Gp-Stick
| 12***60 | Washer-Thrust; (57.5x114.3x1-mm Thk)(1mm Thk) | 3 |
| 15***61 | Pin | 1 |
| 18***50 | Mounting Group-Stick | 1 |
133-3362 Pad & Guard Gp-Stabilizer -Street
| 13***37 | Shaft | 2 |
| 13***38 | Pin | 2 |
| 13***40 | Guard As | 2 |
133-3363 Pad & Guard Gp-Stabilizer
| 13***38 | Pin | 2 |
| 13***40 | Guard As | 2 |
| 13***63 | Pad & Guard Group-Stabilizer | 1 |
133-3366 Pad & Guard Gp-Stabilizer -Street
| 13***38 | Pin | 2 |
| 13***40 | Guard As | 2 |
| 13***66 | Pad & Guard Group-Stabilizer; -Street | 1 |
116-4942 Pad & Mtg Gp-Stabilizer
| 11***42 | Pad & Mtg Group-Stabilizer | 1 |
| 14***08 | Pad-Stabilizer | 2 |
| 6V***13 | Ring-Retaining | 4 |
9r-6062 Pad Gp-Stabilizer -Street
| 13***42 | Pad As-Stabilizer | 1 |
| 14***91 | Latch | 2 |
| 6V***29 | Locknut; (7/16-14-Thd) | 2 |
9r-6007 Pad & Mtg Gp-Stabilizer -Street
| 13***37 | Shaft | 2 |
| 13***38 | Pin | 2 |
| 18***04 | Cable As | 2 |
9r-1085 Pad & Mtg Gp-Stabilizer -Street
| 14***50 | Pad As-Stabilizer; (Street) | 4 |
| 14***08 | Pad-Stabilizer | 2 |
| 6V***13 | Ring-Retaining | 4 |
184-6786 Stick Gp-Extendable
| 11***54 | Shim; (1-mm Thk)(Round) | 4 |
| 15***86 | Cylinder Group-Extendable Stick | 1 |
| 15***64 | Shim; (1-mm Thk) | 6 |
184-6178 Stick Gp-Hoe
| 10***11 | Block | 2 |
| 12***60 | Washer-Thrust; (57.5x114.3x1-mm Thk)(1mm Thk) | 3 |
| 15***61 | Pin | 1 |
Lubrication System
202-5913 Breather Gp
| 03***46 | Gasket | 1 |
| 13***89 | Clip; (Ladder) | 2 |
| 13***55 | Hose; (8-cm) | 0 |
120-8469 Gauge Gp-Oil Level & Filler -With Filter
| 12***69 | Gauge Group-Oil Level & Filler; -With Filter | 1 |
| 12***17 | Hose | 1 |
| 12***18 | Bracket | 1 |
145-8636 Pump Gp-Engine Oil
| 06***27 | Bushing-Terminal | 1 |
| 06***28 | Circlip | 1 |
| 10***15 | Bolt | 3 |
Machine Arrangement
184-7924 Backhoe Ar-Extendable Stick
| 15***28 | Linkage Group-Backhoe Bucket | 1 |
| 16***70 | Lines Group-Boom; -Cylinder | 1 |
| 16***73 | Lines Group-Stick | 1 |
184-7925 Backhoe Ar-Extendable Stick -Boom, Stick Locks
| 15***28 | Linkage Group-Backhoe Bucket | 1 |
| 16***76 | Lines Group-Extendable Stick | 1 |
| 17***01 | Mounting Group-Lines; -Boom Cylinder | 1 |
184-7927 Backhoe Ar-Extendable Stick -Boom, Stick Locks-Auxiliary Lines
| 15***28 | Linkage Group-Backhoe Bucket | 1 |
| 17***29 | Lines Group-Backhoe Auxiliary | 1 |
| 17***90 | Mounting Group-Lines | 1 |
184-7926 Backhoe Ar-Extendable Stick -Auxiliary Lines
| 15***28 | Linkage Group-Backhoe Bucket | 1 |
| 16***70 | Lines Group-Boom; -Cylinder | 1 |
| 16***73 | Lines Group-Stick | 1 |
184-7914 Backhoe Ar-Standard Stick -Auxiliary Lines
| 15***28 | Linkage Group-Backhoe Bucket | 1 |
| 16***70 | Lines Group-Boom; -Cylinder | 1 |
| 16***73 | Lines Group-Stick | 1 |
184-7913 Backhoe Ar-Standard Stick -Boom, Stick Locks
| 15***28 | Linkage Group-Backhoe Bucket | 1 |
| 16***75 | Lines Group-Bucket | 1 |
| 17***01 | Mounting Group-Lines; -Boom Cylinder | 1 |
184-7917 Backhoe Ar-Standard Stick -Auxiliary Lines Short-Boom, Stick Locks
| 15***28 | Linkage Group-Backhoe Bucket | 1 |
| 16***40 | Cylinder Group-Backhoe Bucket | 1 |
| 16***75 | Lines Group-Bucket | 1 |
184-7916 Backhoe Ar-Standard Stick -Auxiliary Lines Short
| 15***28 | Linkage Group-Backhoe Bucket | 1 |
| 16***40 | Cylinder Group-Backhoe Bucket | 1 |
| 16***70 | Lines Group-Boom; -Cylinder | 1 |
184-7915 Backhoe Ar-Standard Stick -Auxiliary Lines-Boom, Stick Locks
| 15***28 | Linkage Group-Backhoe Bucket | 1 |
| 16***40 | Cylinder Group-Backhoe Bucket | 1 |
| 16***75 | Lines Group-Bucket | 1 |
184-7912 Backhoe Ar-Standard Stick
| 15***28 | Linkage Group-Backhoe Bucket | 1 |
| 16***70 | Lines Group-Boom; -Cylinder | 1 |
| 16***73 | Lines Group-Stick | 1 |
184-7859 Chassis Ar
| 16***76 | Control Group-Governor | 1 |
| 16***25 | Wiring Group-Console; -Front | 1 |
| 18***20 | Control Group-Hydraulic Hand; -Loader Single Tilt | 1 |
184-7839 Common Ar
| 10***13 | Loader Ar | 1 |
| 18***39 | Common Ar | 1 |
| 18***59 | Chassis Ar | 1 |
185-0064 Conversion Ar-Certification
| 15***85 | Reflector Group | 1 |
| 18***64 | Conversion Ar-Certification | 1 |
| 18***23 | Lock Group-Hydraulic Foot Control | 2 |
184-9744 Conversion Ar-Certification
| 10***04 | Control Group-Hydraulic Lockout | 1 |
| 15***85 | Reflector Group | 1 |
| 18***44 | Conversion Ar-Certification | 1 |
184-7934 Drive Ar-Backhoe Loader -2-Wheel Drive, 2-Wheel Steer
| 11***65 | Axle & Mtg Group-Rear | 1 |
| 11***37 | Steering Group-Hydraulic | 1 |
| 15***65 | Axle Group-Front | 1 |
184-7948 Drive Ar-Backhoe Loader -All Wheel Drive, 2-Wheel Steer
| 11***65 | Axle & Mtg Group-Rear | 1 |
| 16***59 | Pump Group-Metering; -Hmu | 1 |
| 18***48 | Drive Ar-Backhoe Loader; -All Wheel Drive, 2-Wheel Steer | 1 |
184-7947 Drive Ar-Backhoe Loader -All Wheel Drive, 2-Wheel Steer
| 11***65 | Axle & Mtg Group-Rear | 1 |
| 16***59 | Pump Group-Metering; -Hmu | 1 |
| 18***47 | Drive Ar-Backhoe Loader; -All Wheel Drive, 2-Wheel Steer | 1 |
184-7933 Drive Ar-Backhoe Loader -2-Wheel Drive, 2-Wheel Steer
| 11***65 | Axle & Mtg Group-Rear | 1 |
| 11***37 | Steering Group-Hydraulic | 1 |
| 15***65 | Axle Group-Front | 1 |
107-3313 Loader Ar
| 10***46 | Kickout & Positioner Group | 1 |
| 10***13 | Loader Ar | 1 |
| 12***45 | Wiring Group-Kickout & Positioner | 1 |
185-1125 Suppression Ar-Sound
| 18***25 | Suppression Ar-Sound | 1 |
| 19***61 | Lines Group-Pump | 1 |
| 19***63 | Air Cleaner Group | 1 |
185-1127 Suppression Ar-Sound
| 14***20 | Liner Group-Sound Suppression | 1 |
| 18***27 | Suppression Ar-Sound | 1 |
| 19***61 | Lines Group-Pump | 1 |
185-1128 Suppression Ar-Sound
| 14***20 | Liner Group-Sound Suppression | 1 |
| 18***28 | Suppression Ar-Sound | 1 |
| 19***61 | Lines Group-Pump | 1 |
Operator Station
164-1032 Air Conditioner & Mounting Gp
| 11***09 | Knob-Control | 1 |
| 12***12 | Screw-Pan Head; (8-16x0.32-In) | 2 |
| 13***32 | Screw; (8-18x.39 In) | 2 |
185-1484 Air Conditioner Ar
| 13***40 | Compressor & Mtg Group-Refrig | 1 |
| 14***22 | Condenser & Mtg Group-Refrigerant | 1 |
| 16***32 | Air Conditioner & Mounting Group | 1 |
170-0075 Air Conditioner Gp
| 11***31 | Switch-Temperature; (Air Conditioner) | 1 |
| 12***78 | Locknut; (M6x1-Thd) | 4 |
| 16***39 | Coil As | 1 |
8y-5904 Armrest Gp
| 3E***12 | Nut-Square; (3/8-16-Thd) | 1 |
| 6V***87 | Screw-Pan Head; (10-24x1-In) | 4 |
| 8S***03 | Ring-Retaining | 1 |
206-9451 Cab Ar-Enclosed Rops
| 10***51 | Visor Group-Cab | 1 |
| 11***37 | Film; (Caterpillar, Sun Visor)(Windshield Sun Visor) | 1 |
| 16***48 | Fender Group-Rear | 1 |
184-9738 Cab Ar-Enclosed Rops
| 10***51 | Visor Group-Cab | 1 |
| 11***37 | Film; (Caterpillar, Sun Visor)(Windshield Sun Visor) | 1 |
| 16***48 | Fender Group-Rear | 1 |
184-9737 Cab Ar-Enclosed Rops
| 11***37 | Film; (Caterpillar, Sun Visor)(Windshield Sun Visor) | 1 |
| 16***48 | Fender Group-Rear | 1 |
| 16***55 | Mirror Group-Rear View | 1 |
206-9449 Cab Ar-Enclosed Rops
| 11***37 | Film; (Caterpillar, Sun Visor)(Windshield Sun Visor) | 1 |
| 16***48 | Fender Group-Rear | 1 |
| 16***55 | Mirror Group-Rear View | 1 |
180-7230 Cab As
| 11***73 | Hinge | 6 |
| 16***50 | Cab As | 1 |
| 18***30 | Cab As | 1 |
164-1050 Cab As
| 16***38 | Plate As | 1 |
| 16***50 | Cab As | 1 |
| 16***51 | Fender As; (Rh) | 1 |
180-7250 Cab Gp-Enclosed Rops
| 10***11 | Screw-Machine; (3/8-16x0.75-In) | 2 |
| 11***14 | Pin | 2 |
| 12***56 | Bushing | 12 |
206-9460 Cab Gp-Enclosed Rops
| 10***11 | Screw-Machine; (3/8-16x0.75-In) | 2 |
| 11***14 | Pin | 2 |
| 12***56 | Bushing | 12 |
184-9736 Canopy Ar-Open Rops
| 16***48 | Fender Group-Rear | 1 |
| 16***55 | Mirror Group-Rear View | 1 |
| 16***70 | Trim Group-Cab | 1 |
206-9453 Canopy Ar-Open Rops
| 16***48 | Fender Group-Rear | 1 |
| 16***55 | Mirror Group-Rear View | 1 |
| 16***70 | Trim Group-Cab | 1 |
180-7235 Canopy As
| 14***59 | Handhold; (Lh) | 2 |
| 16***51 | Fender As; (Rh) | 2 |
| 16***52 | Fender As; (Lh) | 2 |
180-7215 Canopy Gp-Open Rops
| 16***39 | Plate As | 1 |
| 16***71 | Glass; (Front, Rh) | 1 |
| 16***72 | Glass; (Front, Lh) | 1 |
206-9470 Canopy Gp-Open Rops
| 16***39 | Plate As | 1 |
| 16***71 | Glass; (Front, Rh) | 1 |
| 16***72 | Glass; (Front, Lh) | 1 |
137-7140 Compressor & Mtg Gp-Refrig
| 10***11 | Support | 1 |
| 13***40 | Compressor & Mtg Group-Refrig | 1 |
| 13***41 | Plate | 1 |
3e-1908 Compressor Gp-Refrigerant
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 2 |
| 31***18 | Valve As-Pressure Relief; (Refrigerant Compressor) | 1 |
144-2222 Condenser & Mtg Gp-Refrigerant
| 14***08 | Spacer; (10x19.5x61-mm Thk) | 2 |
| 14***22 | Condenser & Mtg Group-Refrigerant | 1 |
| 15***61 | Bolt; (M8x1.25x130-mm) | 1 |
237-9541 Console Gp-Front
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 22 |
| 16***73 | Louver As | 5 |
| 23***61 | Console-Front | 1 |
183-4996 Console Gp-Front
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 22 |
| 14***26 | Screw-Flat Head; (6-20x0.75-In) | 4 |
| 15***15 | Louver As-Vent | 2 |
183-4995 Console Gp-Front
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 22 |
| 14***26 | Screw-Flat Head; (6-20x0.75-In) | 4 |
| 15***15 | Louver As-Vent | 2 |
164-1389 Console Gp-Operator -Lh
| 16***32 | Console Group-Side; -Lh | 1 |
| 16***89 | Console Group-Operator; -Lh | 1 |
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
185-3530 Console Gp-Operator
| 12***70 | Screw-Machine; (M6x1x40-mm) | 2 |
| 16***07 | Console-Storage | 1 |
| 17***83 | Locknut; (M4x0.7-Thd) | 4 |
164-1388 Console Gp-Operator -Lh-Air Conditioning
| 16***31 | Console Group-Side; -Lh-Air Conditioning | 1 |
| 16***88 | Console Group-Operator; -With Air Conditioner, Lh | 1 |
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
185-3524 Console Gp-Operator -Rh
| 17***83 | Locknut; (M4x0.7-Thd) | 4 |
| 18***98 | Console Group-Side; -Rh | 1 |
| 18***24 | Console Group-Operator; -Rh | 1 |
164-1132 Console Gp-Side -Lh
| 16***32 | Console Group-Side; -Lh | 1 |
| 16***33 | Cover | 1 |
| 16***34 | Pin | 1 |
183-4997 Console Gp-Side
| 16***78 | Clip | 5 |
| 17***91 | Nut-Spring | 16 |
| 18***91 | Cover Group-Console | 1 |
183-4998 Console Gp-Side
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 4 |
| 11***03 | Louver As | 1 |
| 16***78 | Clip | 5 |
164-1131 Console Gp-Side -Lh-Air Conditioning
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 8 |
| 11***03 | Louver As | 2 |
| 16***31 | Console Group-Side; -Lh-Air Conditioning | 1 |
183-3120 Control Gp-Hydraulic Hand -Loader Single Tilt
| 09***30 | Pin, Spring | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***91 | Nut-Jam; (3/4-16-Thd) | 1 |
183-3150 Control Gp-Hydraulic Hand -Loader Single Tilt
| 13***53 | Turnbuckle | 1 |
| 16***95 | Knob | 1 |
| 17***35 | Lock Pin | 1 |
106-2404 Control Gp-Hydraulic Lockout
| 10***04 | Control Group-Hydraulic Lockout | 1 |
| 10***05 | Plate As | 1 |
| 10***09 | Pin | 1 |
184-4483 Control Gp-Hydraulic Pedal -Stick
| 18***83 | Control Group-Hydraulic Pedal; -Extendable Stick | 1 |
| 18***88 | Support As | 1 |
| 18***91 | Pedal As; (Rh) | 1 |
184-4484 Control Gp-Hydraulic Pedal -Backhoe
| 18***84 | Control Group-Hydraulic Pedal; -Auxiliary | 1 |
| 18***86 | Shaft As | 1 |
| 18***03 | Pedal As; (Lh) | 1 |
185-5916 Control Gp-Joystick -Lh
| 12***04 | Plate | 1 |
| 15***69 | Boot | 1 |
| 18***16 | Control Group-Joystick; -Lh | 1 |
185-5915 Control Gp-Joystick -Rh
| 12***04 | Plate | 1 |
| 15***43 | Handle-Control | 1 |
| 15***69 | Boot | 1 |
183-4897 Control Gp-Steering
| 15***80 | Steering Wheel Group | 1 |
| 16***40 | Panel As | 1 |
| 17***68 | Steering Column Group | 1 |
164-1130 Control Gp-Transmission
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***91 | Nut-Jam; (3/4-16-Thd) | 1 |
| 16***13 | Plate | 1 |
191-1784 Cover Gp-Console
| 11***77 | Screw-Pan Head; (8-32x12.7-mm) | 1 |
| 12***05 | Plate | 1 |
| 13***12 | Spring | 1 |
183-4991 Cover Gp-Console
| 11***89 | Retainer; (Stud) | 5 |
| 16***08 | Cover | 1 |
| 16***51 | Fastener | 5 |
186-0252 Cover Gp-Firewall
| 16***37 | Cover | 1 |
| 18***52 | Cover Group-Firewall; -Lower | 1 |
| 9X***38 | Washer; (7x19x2-mm Thk) | 12 |
198-0104 Cover Gp-Firewall
| 12***72 | Seal; (135-cm) | 0 |
| 19***03 | Plate | 1 |
| 19***04 | Cover Group-Firewall; -Upper | 1 |
197-7564 Cover Gp-Post
| 12***54 | Fastener; (Loop) (22cm) (X3) | 0 |
| 12***55 | Fastener-Hook; (18-cm Each) | 0 |
| 19***30 | Cover-Post; (Rh) | 1 |
164-1061 Door Gp-Cab
| 13***87 | Screw; (M4x0.7x12-mm) | 6 |
| 14***19 | Bracket | 2 |
| 14***55 | Seal; (478-cm) | 0 |
164-1062 Door Gp-Cab
| 13***87 | Screw; (M4x0.7x12-mm) | 6 |
| 14***19 | Bracket | 2 |
| 14***55 | Seal; (478-cm) | 0 |
164-1142 Duct Gp-Air -Powershift
| 16***44 | Duct As | 1 |
| 16***42 | Duct Group-Air; (Autoshift) | 1 |
| 18***63 | Gasket | 1 |
164-1141 Duct Gp-Air -Standard Shift
| 16***43 | Duct As-Front | 1 |
| 16***41 | Duct Group-Air; (Standard Shift) | 1 |
| 16***98 | Boot | 1 |
184-6576 Duct Gp-Cab Air
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 8 |
| 14***26 | Screw-Flat Head; (6-20x0.75-In) | 2 |
| 15***15 | Louver As-Vent | 1 |
184-6575 Duct Gp-Cab Air -Heater
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 8 |
| 14***26 | Screw-Flat Head; (6-20x0.75-In) | 2 |
| 15***15 | Louver As-Vent | 1 |
185-3525 Fastener Gp-Operator Console -Front
| 18***25 | Fastener Group-Operator Console; -Front | 1 |
| 5P***16 | Washer; (Hard) (8.8x20.5x2mm Thk) | 4 |
| 6V***89 | Locknut; (M8x1.25-Thd) | 4 |
180-5761 Floor Mat Gp
| 18***51 | Floor Mat | 1 |
| 18***54 | Plate; (Lh) | 2 |
| 18***61 | Floor Mat Group | 1 |
180-5766 Floor Mat Gp
| 18***54 | Plate; (Lh) | 2 |
| 18***56 | Floor Mat | 1 |
| 18***66 | Floor Mat Group | 1 |
192-4018 Footrest Gp
| 19***18 | Footrest Group | 1 |
| 19***19 | Bracket As | 1 |
| 6V***43 | Locknut; (M6x1-Thd) | 2 |
164-1030 Heater & Mtg Gp-Cab
| 11***09 | Knob-Control | 1 |
| 12***12 | Screw-Pan Head; (8-16x0.32-In) | 2 |
| 13***32 | Screw; (8-18x.39 In) | 2 |
185-1491 Heater Ar-Cab
| 16***30 | Heater & Mtg Group-Cab | 1 |
| 16***31 | Lines Group-Heater | 1 |
| 16***88 | Console Group-Operator; -With Air Conditioner, Lh | 1 |
170-0076 Heater Gp-Cab
| 12***78 | Locknut; (M6x1-Thd) | 4 |
| 16***13 | Coil As-Heater | 1 |
| 16***13 | Blower Group-Cab; (Heater) | 1 |
193-2342 Horn Gp-Electric -Rear
| 09***15 | Lockwasher | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 16***25 | Horn As; (24-Volt, Low Tone) | 1 |
183-4910 Latch Gp-Console
| 09***49 | Bolt; (M8x1.25x40-mm) | 1 |
| 11***02 | Knob | 1 |
| 15***83 | Washer-Hard; (8.4x35x2.5-mm Thk) | 2 |
183-3887 Lever Gp-Governor
| 12***78 | Locknut; (M6x1-Thd) | 1 |
| 16***79 | Cable As | 1 |
| 16***83 | Lever As | 1 |
164-1165 Liner Gp-Cab
| 08***77 | Lamp Group-Dome; (12-Volt) | 1 |
| 11***20 | Bolt-Socket Head; (M4x0.7x35-mm) | 8 |
| 13***32 | Plate-Face | 1 |
164-1031 Lines Gp-Heater
| 16***31 | Lines Group-Heater | 1 |
| 3E***21 | Clip | 4 |
| 5D***26 | Clamp-Band; (9/16 To 1 1/16) | 8 |
164-1033 Lines Gp-Heater & Air Cond
| 10***93 | Hose As | 1 |
| 10***94 | Hose As | 1 |
| 11***17 | Fitting As-Air Conditioner | 1 |
189-3823 Lock Gp-Hydraulic Foot Control
| 17***35 | Lock Pin | 1 |
| 18***82 | Pin | 1 |
| 18***23 | Lock Group-Hydraulic Foot Control | 1 |
164-1055 Mirror Gp-Rear View
| 12***20 | Mirror As | 2 |
| 15***05 | Bracket & Mounting As; (Lh) | 1 |
| 15***06 | Bracket & Mounting As; (Rh) | 1 |
122-2054 Mirror Gp-Rear View
| 12***51 | Bracket | 2 |
| 12***52 | Mirror As; (Rh) | 1 |
| 12***53 | Mirror As; (Lh) | 1 |
164-1155 Mirror Gp-Rear View
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 16***55 | Mirror Group-Rear View | 1 |
| 19***29 | Mirror As | 1 |
144-9930 Module Gp-Warning Indicator -With Alarm, Function Lights
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 14***30 | Module Group-Warning Indicator; -With Alarm, Function Lights | 1 |
| 14***34 | Gasket; (Indicator Module) | 1 |
144-9931 Module Gp-Warning Indicator
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 14***31 | Module Group-Warning Indicator; -Without Alarm | 1 |
| 14***34 | Gasket; (Indicator Module) | 1 |
186-2589 Motor Gp-Window Wiper -Front
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 15***91 | Motor Group-Window Wiper; (Front) | 1 |
| 18***89 | Motor Group-Window Wiper; -Front | 1 |
183-4900 Mounting Gp-Backhoe Control
| 11***60 | Strap | 2 |
| 12***99 | Rivet | 4 |
| 15***79 | Nut; (U-Type Retainer) | 6 |
190-7374 Mounting Gp-Instrument Panel
| 16***83 | Panel As-Instrument | 1 |
| 19***74 | Mounting Group-Instrument Panel; -Side Console | 1 |
| 9X***45 | Screw-Truss Head (M6x1x20mm); (M6x1x20-mm) | 10 |
183-6078 Mounting Gp-Stabilizer Control
| 16***98 | Knob | 2 |
| 18***78 | Mounting Group-Stabilizer Control | 1 |
| 20***98 | Plate | 1 |
184-7898 Panel Gp-Instrument -Front Console
| 16***78 | Plate | 2 |
| 16***79 | Panel As | 1 |
| 18***98 | Panel Group-Instrument; -Front Console | 1 |
164-1078 Pedal Gp-Governor
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 4 |
| 12***78 | Locknut; (M6x1-Thd) | 1 |
| 16***78 | Pedal Group-Governor | 1 |
190-8918 Seat Belt Gp
| 19***18 | Seat Belt Group; -Retractable, 2-In | 1 |
| 19***25 | Washer-Hard; (13.5x18x4-mm Thk) | 1 |
| 3E***04 | Bolt; (M12x1.75x45-mm) | 1 |
132-3728 Seat Belt Gp
| 13***36 | Seat Belt Group | 1 |
| 13***28 | Seat Belt Group | 1 |
| 1L***80 | Bolt; (7/16-20x1.5-In) | 1 |
131-2136 Seat Belt Gp
| 13***36 | Seat Belt Group | 1 |
| 1L***80 | Bolt; (7/16-20x1.5-In) | 1 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 2 |
190-8919 Seat Belt Gp
| 19***19 | Seat Belt Group; -Retractable, 3-In | 1 |
| 19***25 | Washer-Hard; (13.5x18x4-mm Thk) | 1 |
| 3E***04 | Bolt; (M12x1.75x45-mm) | 1 |
273-6036 Seat Gp -Cloth
| 10***81 | Bolt-Socket Head; (M8x1.25x20-mm) | 2 |
| 12***80 | Locknut; (M12x1.75-Thd) | 2 |
| 16***83 | Washer; (19.8x31.8x1.6-mm Thk) | 3 |
164-1213 Seat Gp
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 4 |
| 09***78 | Pin-Spring | 2 |
| 10***81 | Bolt-Socket Head; (M8x1.25x20-mm) | 2 |
164-1210 Seat Gp
| 10***81 | Bolt-Socket Head; (M8x1.25x20-mm) | 2 |
| 12***80 | Locknut; (M12x1.75-Thd) | 2 |
| 13***40 | Locknut; (M8x1.25-Thd) | 8 |
180-5771 Seat Gp-Suspension
| 16***02 | Seat Group-Suspension; -Vinyl | 1 |
| 18***71 | Seat Group-Suspension; -Standard, Vinyl | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 1 |
164-1203 Seat Gp-Suspension
| 14***45 | Kit-Slider Block; (Suspension Seat) | 2 |
| 16***89 | Block-Slider | 2 |
| 16***44 | Kit-Slider Block; (Includes Blocks And Setscrew) | 1 |
180-5772 Seat Gp-Suspension
| 16***03 | Seat Group-Suspension; -Deluxe, Cloth | 1 |
| 18***72 | Seat Group-Suspension; -Deluxe, Cloth | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 1 |
164-1202 Seat Gp-Suspension
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 4 |
| 09***78 | Pin-Spring | 2 |
| 12***77 | Shaft-Pivot | 1 |
206-1792 Seat Gp-Suspension -Cloth
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
| 16***47 | Bracket As; (Rh) | 1 |
| 16***61 | Bracket As; (Lh) | 1 |
180-5770 Seat Gp-Suspension
| 18***70 | Seat Group-Suspension; -Standard, Cloth | 1 |
| 20***92 | Seat Group-Suspension; -Cloth | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 1 |
273-6372 Suspension Gp-Seat
| 09***82 | Nut Self-Locking; (M8x1.25 Thd) | 2 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
164-1207 Suspension Gp-Seat -Air
| 11***42 | Fastener | 34 |
| 12***80 | Locknut; (M12x1.75-Thd) | 1 |
| 13***43 | Screw-Button Head; (3/8-16x0.625-In) | 1 |
164-1370 Trim Gp-Cab
| 16***10 | Cover; (Parking Brake) | 1 |
| 16***66 | Brush As | 1 |
| 16***70 | Trim Group-Cab | 1 |
108-8251 Visor Gp-Cab
| 10***51 | Visor Group-Cab | 1 |
| 8T***71 | Capscrew; (Hex Hd) (M6 X 1.00 X 12mm, G10.9, Z) | 4 |
| 9R***03 | Plate | 2 |
167-8187 Washer Gp-Window
| 11***50 | Plate | 1 |
| 11***23 | Cap | 1 |
| 11***24 | Grommet | 2 |
164-1059 Window Gp-Cab -Rh
| 10***08 | Handle; (Rh) | 1 |
| 12***42 | Retainer; (Mount) | 6 |
| 12***45 | Washer; (13x40x3-mm Thk) | 8 |
164-1325 Window Gp-Cab -Rear
| 11***02 | Knob | 2 |
| 11***49 | Cap | 2 |
| 12***43 | Seal | 1 |
164-1060 Window Gp-Cab -Lh
| 10***08 | Handle; (Rh) | 1 |
| 12***42 | Retainer; (Mount) | 6 |
| 12***45 | Washer; (13x40x3-mm Thk) | 8 |
164-1073 Window Gp-Door -Rh
| 10***08 | Handle; (Rh) | 1 |
| 12***42 | Retainer; (Mount) | 5 |
| 12***43 | Spacer; (16-mm Thk) | 2 |
164-1074 Window Gp-Door -Lh
| 10***08 | Handle; (Rh) | 1 |
| 12***42 | Retainer; (Mount) | 5 |
| 12***43 | Spacer; (16-mm Thk) | 2 |
174-2024 Wiper Gp-Window
| 10***45 | Blade As-Wiper; (600-mm) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 13***49 | Spacer; (7.4x12.7x24-mm Thk)(12.7mm Dia) | 2 |
Power Train
6d-0337 Valve Gp-Tire
| 2D***28 | Core-Valve | 1 |
| 2D***29 | Grommet | 1 |
| 2D***30 | Washer-Ring | 1 |
9r-6480 Wheel & Tire Gp -Front, Rh
| 13***70 | Wheel As; (Front)(9 X 18) | 1 |
| 6D***37 | Valve Group-Tire | 1 |
| 9R***80 | Wheel & Tire Group-Front; -Front, Rh | 1 |
9r-6479 Wheel & Tire Gp -Front, Lh
| 13***70 | Wheel As; (Front)(9 X 18) | 1 |
| 6D***37 | Valve Group-Tire | 1 |
| 9R***79 | Wheel & Tire Group-Front; -Front, Lh | 1 |
102-1381 Wheel & Tire Gp -Front, Rh
| 10***80 | Wheel As; (Front) | 1 |
| 10***81 | Wheel & Tire Group-Front; -Front, Rh | 1 |
| 6D***37 | Valve Group-Tire | 1 |
114-0165 Axle & Mtg Gp-Rear
| 11***65 | Axle & Mtg Group-Rear | 1 |
| 15***57 | Axle Group-Rear | 1 |
| 5F***34 | Valve As-Vent; (Governor Air Compressor) | 1 |
154-5472 Axle Gp-Drive & Steering -Front
| 00***01 | Cone-Bearing | 2 |
| 00***02 | Cone-Roller Bearing | 3 |
| 03***26 | Cup-Bearing | 2 |
186-3462 Axle Gp-Drive & Steering
| 11***29 | Pin | 1 |
| 15***72 | Axle Group-Drive & Steering; -Front | 1 |
| 16***96 | Washer-Thrust; (55.5x100.5x5-mm Thk)(5mm) | 2 |
156-2857 Axle Gp-Rear
| 03***57 | Cone-Bearing; (Tapered Roller) | 2 |
| 0T***18 | Bolt Strap To Front Cover | 2 |
| 11***47 | Flange | 1 |
191-9114 Control Gp-Differential Lock
| 10***67 | Spring | 1 |
| 19***13 | Rod As | 1 |
| 19***14 | Control Group-Differential Lock | 1 |
111-7907 Drive Gp-Flexible Coupling
| 11***06 | Plate-Converter Drive | 1 |
| 11***07 | Drive Group-Flexible Coupling | 1 |
| 11***13 | Plate-Converter Reinforcement | 1 |
8y-7483 Filler Gp-Power Train Oil -All Wheel Drive
| 10***66 | Gauge As-Oil Level (Dipstick); (Transmission) | 1 |
| 11***19 | Bracket As | 1 |
| 12***51 | Tube As | 1 |
138-7381 Filler Gp-Power Train Oil -Power Shift
| 11***19 | Bracket As | 1 |
| 13***78 | Gauge As-Oil Level (Dipstick); (Transmission) | 1 |
| 13***80 | Tube As | 1 |
136-3110 Filler Gp-Power Train Oil -2-Wheel Drive
| 10***66 | Gauge As-Oil Level (Dipstick); (Transmission) | 1 |
| 11***19 | Bracket As | 1 |
| 12***51 | Tube As | 1 |
178-0094 Filter Gp-Oil -Hydraulic
| 12***17 | Filter-Oil; (Ultra High Efficiency)(Hydraulic, Transmission) | 1 |
| 16***09 | Plug As-Hydraulic | 1 |
| 17***94 | Filter Group-Oil; -Hydraulic | 1 |
185-1486 Power Train Ar -All Wheel Drive, Autoshift
| 13***59 | Shaft Group-Drive; -Front-Powershift | 1 |
| 13***81 | Filler Group-Power Train Oil; -Power Shift | 1 |
| 14***88 | Mounting Group-Engine & Xmsn; -Power Shift | 1 |
185-6399 Power Train Ar -Standard Shift-Two Wheel Drive
| 13***10 | Filler Group-Power Train Oil; -2-Wheel Drive | 1 |
| 14***82 | Mounting Group-Engine & Xmsn | 1 |
| 14***86 | Lines Group-Power Train Cooler | 1 |
185-6398 Power Train Ar
| 11***53 | Shaft Group-Drive; -Front | 1 |
| 14***82 | Mounting Group-Engine & Xmsn | 1 |
| 14***86 | Lines Group-Power Train Cooler | 1 |
184-7970 Power Train Ar -2 Wheel Steer
| 11***51 | Shaft Group-Drive; -Rear | 1 |
| 16***18 | Control Group-Service Brake | 1 |
| 18***70 | Control Group-Parking Brake | 1 |
185-1489 Power Train Ar
| 11***53 | Shaft Group-Drive; -Front | 1 |
| 14***82 | Mounting Group-Engine & Xmsn | 1 |
| 14***86 | Lines Group-Power Train Cooler | 1 |
226-1601 Power Train Ar
| 11***53 | Shaft Group-Drive; -Front | 1 |
| 14***82 | Mounting Group-Engine & Xmsn | 1 |
| 14***86 | Lines Group-Power Train Cooler | 1 |
185-1490 Power Train Ar
| 13***10 | Filler Group-Power Train Oil; -2-Wheel Drive | 1 |
| 14***82 | Mounting Group-Engine & Xmsn | 1 |
| 14***86 | Lines Group-Power Train Cooler | 1 |
113-1153 Shaft Gp-Drive -Front
| 10***26 | Bolt; (M24x19.1-mm) | 8 |
| 11***49 | Shaft As-Drive-Front | 1 |
| 11***53 | Shaft Group-Drive; -Front | 1 |
138-4559 Shaft Gp-Drive -Front-Powershift
| 10***26 | Bolt; (M24x19.1-mm) | 8 |
| 11***87 | Kit-Spider & Bearing; (Drive Shaft) | 2 |
| 13***59 | Shaft Group-Drive; -Front-Powershift | 1 |
130-3014 Shaft Gp-Drive -Lh
| 13***14 | Shaft Group-Drive; -Lh | 1 |
| 13***26 | Yoke | 1 |
| 13***27 | Spider | 2 |
113-1151 Shaft Gp-Drive -Rear
| 10***26 | Bolt; (M24x19.1-mm) | 4 |
| 11***50 | Shaft As-Main | 1 |
| 11***51 | Shaft Group-Drive; -Rear | 1 |
130-3013 Shaft Gp-Drive -Rh
| 13***13 | Shaft Group-Drive; -Rh | 1 |
| 13***26 | Yoke | 1 |
| 13***27 | Spider | 2 |
202-7431 Transmission & Mounting Gp -All Wheel Drive
| 11***21 | Support As; (Rh) | 1 |
| 13***37 | Support As; (Lh) | 1 |
| 19***44 | Transmission Group-Direct Drive; -All Wheel Drive | 1 |
202-6008 Transmission & Mounting Gp -All Wheel Drive-Standard Shift
| 11***21 | Support As; (Rh) | 1 |
| 13***37 | Support As; (Lh) | 1 |
| 20***62 | Transmission Group-Direct Drive; -All Wheel Drive | 1 |
202-7432 Transmission & Mounting Gp -All Wheel Drive
| 11***21 | Support As; (Rh) | 1 |
| 13***38 | Support As; (Lh) | 1 |
| 19***49 | Transmission Group-Power Shift; -All Wheel Drive | 1 |
185-7586 Transmission Ar-Direct Drive -All Wheel Drive
| 11***07 | Drive Group-Flexible Coupling | 1 |
| 11***40 | Filter-Oil; (Standard Efficiency)(Transmission) | 1 |
| 14***93 | Torque Converter As | 1 |
185-7585 Transmission Ar-Direct Drive -Two Wheel Drive
| 11***07 | Drive Group-Flexible Coupling | 1 |
| 14***93 | Torque Converter As | 1 |
| 18***85 | Transmission Ar-Direct Drive; -Two Wheel Drive | 1 |
185-7587 Transmission Ar-Power Shift -All Wheel Drive
| 11***07 | Drive Group-Flexible Coupling | 1 |
| 11***40 | Filter-Oil; (Standard Efficiency)(Transmission) | 1 |
| 18***87 | Transmission Ar-Power Shift; -All Wheel Drive | 1 |
201-8562 Transmission Gp-Direct Drive -All Wheel Drive
| 00***69 | Cup-Roller Bearing | 2 |
| 00***71 | Cone-Bearing | 2 |
| 01***45 | Ball | 3 |
192-0842 Transmission Gp-Direct Drive -Two Wheel Drive
| 00***69 | Cup-Roller Bearing | 2 |
| 00***71 | Cone-Bearing | 2 |
| 01***45 | Ball | 3 |
192-0844 Transmission Gp-Direct Drive
| 00***69 | Cup-Roller Bearing | 2 |
| 00***71 | Cone-Bearing | 2 |
| 01***45 | Ball | 3 |
192-0849 Transmission Gp-Power Shift -All Wheel Drive
| 00***62 | Seal-O-Ring; (63.17mm Id) | 2 |
| 09***27 | Ring-Retaining | 1 |
| 09***28 | Ring-Retaining; (External) | 1 |
223-8181 Valve Gp-Solenoid
| 06***39 | Seal-O-Ring | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
127-4307 Wheel & Tire Gp -Rear, Lh
| 11***76 | Wheel As; (Rear) | 1 |
| 12***07 | Wheel & Tire Group; -Rear, Lh | 1 |
| 12***11 | Tire; (16.9r28)(16.9r28) | 1 |
216-9117 Wheel & Tire Gp -Rear
| 14***21 | Nut-Hex Flange; (3/4-16-Thd) | 16 |
| 21***17 | Wheel & Tire Group; -Rear | 1 |
| 21***18 | Wheel & Tire Group; -Lh | 1 |
216-9114 Wheel & Tire Gp -Front
| 14***21 | Nut-Hex Flange; (3/4-16-Thd) | 16 |
| 21***14 | Wheel & Tire Group; -Front | 1 |
| 21***15 | Wheel & Tire Group; -Lh | 1 |
127-4306 Wheel & Tire Gp -Rear, Lh
| 11***76 | Wheel As; (Rear) | 1 |
| 12***06 | Wheel & Tire Group; -Rear, Lh | 1 |
| 12***12 | Tire; (16.9r28)(16. 9r28) | 1 |
9r-2822 Wheel & Tire Gp -Front, Rh
| 6D***37 | Valve Group-Tire | 1 |
| 9R***15 | Wheel As; (Front)(Front) | 1 |
| 9R***56 | Tire; (11-R16)(11lx16-12pr) | 1 |
216-9115 Wheel & Tire Gp -Lh
| 13***86 | Wheel As; (Front) | 1 |
| 21***11 | Tire; (12.5/80-18) | 1 |
| 21***15 | Wheel & Tire Group; -Lh | 1 |
216-9116 Wheel & Tire Gp -Rh
| 13***86 | Wheel As; (Front) | 1 |
| 21***11 | Tire; (12.5/80-18) | 1 |
| 21***16 | Wheel & Tire Group; -Rh | 1 |
127-4285 Wheel & Tire Gp -Rear
| 12***85 | Wheel & Tire Group; -Rear | 1 |
| 12***89 | Wheel & Tire Group; -Lh | 1 |
| 12***90 | Wheel & Tire Group; -Rh | 1 |
133-3219 Wheel & Tire Gp -Front
| 10***81 | Wheel & Tire Group-Front; -Front, Rh | 1 |
| 10***82 | .. Track-Link; B, Wheel & Tire Group; -Front, Lh | 1 |
| 13***19 | Wheel & Tire Group; -Front | 1 |
216-9125 Wheel & Tire Gp -Rh
| 21***13 | Tire; (16.9-28) | 1 |
| 21***25 | Wheel & Tire Group; -Rh | 1 |
| 27***42 | Wheel As; (Rear)(Rear) | 1 |
133-3213 Wheel & Tire Gp -Front
| 13***13 | Wheel & Tire Group; -Front | 1 |
| 14***21 | Nut-Hex Flange; (3/4-16-Thd) | 16 |
| 9R***22 | Wheel & Tire Group; -Front, Rh | 2 |
127-4300 Wheel & Tire Gp -Rear, Rh
| 11***76 | Wheel As; (Rear) | 1 |
| 12***00 | Wheel & Tire Group; -Rear, Rh | 1 |
| 12***12 | Tire; (16.9r28)(16. 9r28) | 1 |
127-4296 Wheel & Tire Gp -Rear
| 12***96 | Wheel & Tire Group; -Rear | 1 |
| 12***01 | Wheel & Tire Group; -Rear, Rh | 1 |
| 12***07 | Wheel & Tire Group; -Rear, Lh | 1 |
216-9123 Wheel & Tire Gp -Rear
| 14***21 | Nut-Hex Flange; (3/4-16-Thd) | 16 |
| 21***23 | Wheel & Tire Group; -Rear | 1 |
| 21***24 | Wheel & Tire Group; -Lh | 1 |
216-9124 Wheel & Tire Gp -Lh
| 21***13 | Tire; (16.9-28) | 1 |
| 21***24 | Wheel & Tire Group; -Lh | 1 |
| 27***42 | Wheel As; (Rear)(Rear) | 1 |
127-4301 Wheel & Tire Gp -Rear, Rh
| 11***76 | Wheel As; (Rear) | 1 |
| 12***01 | Wheel & Tire Group; -Rear, Rh | 1 |
| 12***11 | Tire; (16.9r28)(16.9r28) | 1 |
133-3215 Wheel & Tire Gp -Front
| 13***15 | Wheel & Tire Group; -Front | 1 |
| 14***21 | Nut-Hex Flange; (3/4-16-Thd) | 16 |
| 9R***79 | Wheel & Tire Group-Front; -Front, Lh | 1 |
127-4295 Wheel & Tire Gp -Rear
| 12***95 | Wheel & Tire Group; -Rear | 1 |
| 12***00 | Wheel & Tire Group; -Rear, Rh | 1 |
| 12***06 | Wheel & Tire Group; -Rear, Lh | 1 |
216-9118 Wheel & Tire Gp -Lh
| 21***12 | Tire; (18.4-26) | 1 |
| 21***18 | Wheel & Tire Group; -Lh | 1 |
| 27***50 | Wheel As; (Rear) | 1 |
102-1382 Wheel & Tire Gp -Front, Lh
| 10***80 | Wheel As; (Front) | 1 |
| 10***82 | .. Track-Link; B, Wheel & Tire Group; -Front, Lh | 1 |
| 6D***37 | Valve Group-Tire | 1 |
216-9119 Wheel & Tire Gp -Rh
| 21***12 | Tire; (18.4-26) | 1 |
| 21***19 | Wheel & Tire Group; -Rh | 1 |
| 27***50 | Wheel As; (Rear) | 1 |
127-4290 Wheel & Tire Gp -Rh
| 11***11 | Wheel As-Rear; (Rear)(W16lx24) | 1 |
| 12***90 | Wheel & Tire Group; -Rh | 1 |
| 12***93 | Tire; (19.5-R24)(19.5lr-24) | 1 |
127-4289 Wheel & Tire Gp -Lh
| 11***11 | Wheel As-Rear; (Rear)(W16lx24) | 1 |
| 12***89 | Wheel & Tire Group; -Lh | 1 |
| 12***93 | Tire; (19.5-R24)(19.5lr-24) | 1 |
Service Equipment And Supplies
186-5297 Film Gp
| 10***03 | Fastener | 8 |
| 10***33 | Film-Identification; (Cat, Lh) | 1 |
| 10***34 | Film-Identification; (Cat, Rh) | 1 |
113-0018 Installation Ar-Wheel Chock
| 11***18 | Installation Ar-Wheel Chock | 1 |
| 11***42 | Chock Group-Wheel | 2 |
| 13***52 | Plate | 2 |
175-7877 Link Gp-Shipping
| 12***86 | Plate | 1 |
| 17***77 | Link Group-Shipping; -For Shipping Only | 1 |
134-8204 Lock Gp-Vandalism
| 13***04 | Lock Group-Vandalism | 1 |
| 5P***00 | Key Total 2 Pieces Per Unit; (Literature Compartment) | 1 |
| 5P***02 | Padlock Group; (Includes: Battery Compartments, Platform Compartments, Radiator Access Door, Firewall Doors) | 2 |
185-7766 Plate & Film Gp -Czechoslovakian
| 14***60 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 14***61 | Film-Warning; (Lift Arm Brace, Parallel Lift) | 1 |
| 14***64 | Plate-Warning; (Secure Extendable Stick) | 2 |
185-7737 Plate & Film Gp
| 18***37 | Plate & Film Group | 1 |
| 18***97 | Film Group | 1 |
185-7762 Plate & Film Gp -Arabic
| 10***76 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 12***72 | Plate-Warning; (Secure Extendable Stick) | 2 |
| 13***98 | Film-Warning; (Lift Arm Brace, Parallel Lift) | 1 |
185-7768 Plate & Film Gp -Polish
| 15***84 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 15***85 | Film-Warning; (Lift Arm Brace, Parallel Lift) | 1 |
| 15***86 | Film-Warning; (Lift Arm Brace, Single Tilt) | 1 |
185-7769 Plate & Film Gp -Dutch
| 10***75 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 12***71 | Plate-Warning; (Secure Extendable Stick) | 2 |
| 13***97 | Film-Warning; (Lift Arm Brace, Parallel Lift) | 1 |
198-0106 Plate & Film Gp -Hungarian
| 19***27 | Film-Warning; (Battery) | 1 |
| 19***06 | Plate & Film Group; -Hungarian | 1 |
| 19***09 | Film-Notice; (Engine Start) | 1 |
185-7767 Plate & Film Gp -Hebrew
| 14***96 | Plate-Warning; (Secure Extendable Stick) | 2 |
| 14***97 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 14***99 | Film-Warning; (Lift Arm Brace, Parallel Lift) | 1 |
185-7758 Plate & Film Gp -Portuguese
| 10***70 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 12***66 | Plate-Warning; (Secure Extendable Stick) | 2 |
| 13***92 | Film-Warning; (Lift Arm Brace, Parallel Lift)(Parallel Lift) | 1 |
185-7138 Plate & Film Gp
| 10***33 | Film-Identification; (Hydraulic Oil) | 1 |
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 16***68 | Film-Warning; (No Clearance, Stay Back) | 2 |
185-7764 Plate & Film Gp
| 17***13 | Film-Warning-Notice; (Qcplr, Stg Aid, Read Omm) | 1 |
| 18***64 | Plate & Film Group | 1 |
| 19***38 | Plate-Warning-Rops/Fops | 1 |
185-7770 Plate & Film Gp -Greek
| 10***74 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 12***70 | Plate-Warning; (Secure Extendable Stick) | 2 |
| 13***95 | Film-Warning; (Lift Arm Brace, Parallel Lift) | 1 |
198-0105 Plate & Film Gp -Norwegian
| 19***18 | Film-Warning; (Battery) | 1 |
| 19***05 | Plate & Film Group; -Norwegian | 1 |
| 19***08 | Film-Notice; (Engine Start) | 1 |
198-0107 Plate & Film Gp -Turkish
| 19***21 | Film-Warning; (Battery) | 1 |
| 19***07 | Plate & Film Group; -Turkish | 1 |
| 19***10 | Film-Notice; (Engine Starting) | 1 |
185-7760 Plate & Film Gp -Italian
| 10***72 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 12***68 | Plate-Warning; (Secure Extendable Stick) | 2 |
| 13***11 | Film-Warning; (Lift Arm Brace, Parallel Lift) | 1 |
185-7759 Plate & Film Gp -German
| 10***71 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 12***67 | Plate-Warning; (Secure Extendable Stick) | 2 |
| 13***93 | Film-Warning; (Lift Arm Brace, Parallel Lift) | 1 |
185-7756 Plate & Film Gp -French
| 10***68 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 12***64 | Plate-Warning; (Secure Extendable Stick) | 2 |
| 13***90 | Film-Warning; (Lift Arm Brace, Parallel Lift) | 1 |
185-7757 Plate & Film Gp -Spanish
| 10***69 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 12***65 | Plate-Warning; (Secure Extendable Stick) | 2 |
| 13***91 | Film-Warning; (Lift Arm Brace, Parallel Lift) | 1 |
185-7763 Plate & Film Gp -Swedish
| 10***77 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 10***19 | Film-Notice; (Engine Starting) | 1 |
| 12***73 | Plate-Warning; (Secure Extendable Stick) | 2 |
185-7761 Plate & Film Gp -Danish
| 10***73 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 12***69 | Plate-Warning; (Secure Extendable Stick) | 2 |
| 13***94 | Film-Warning; (Lift Arm Brace, Parallel Lift) | 1 |
185-7765 Plate & Film Gp -Finnish
| 12***42 | Film-Notice; (Engine Starting) | 1 |
| 12***74 | Plate-Warning; (Secure Extendable Stick) | 2 |
| 12***83 | Film-Warning; (Jump Start, Read Omm) | 1 |
Steering System
154-5465 Axle Gp-Front
| 00***20 | Washer-Thrust; (35x63.5x3.14-mm Thk) | 2 |
| 11***29 | Pin | 1 |
| 12***25 | Spindle As-Rh | 1 |
167-4235 Cylinder Gp-Steering -Power Shift
| 15***49 | Head | 2 |
| 16***95 | Seal As | 1 |
| 16***33 | Ring-Expander | 1 |
178-7190 Cylinder Gp-Steering
| 09***28 | Ring-Retaining; (External) | 1 |
| 13***82 | Cylinder | 1 |
| 13***83 | Rod | 1 |
153-7369 Knob Gp-Steering
| 15***69 | Knob Group-Steering | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 1 |
| 8T***24 | Washer-To Assemble Valve As And Plates | 1 |
186-4119 Lines Gp-Steering
| 03***79 | Nipple; (Hose) | 1 |
| 11***42 | Hose As | 1 |
| 11***59 | Hose As | 1 |
188-8586 Lines Gp-Steering
| 03***79 | Nipple; (Hose) | 1 |
| 11***42 | Hose As | 1 |
| 11***59 | Hose As | 1 |
149-4099 Lock Gp-Steering Cylinder
| 14***99 | Lock Group-Steering Cylinder; -Anti-Theft, All Wheel Drive | 1 |
| 14***16 | Sleeve-Steering Lock | 1 |
| 14***18 | Pin | 1 |
149-4098 Lock Gp-Steering Cylinder
| 14***98 | Lock Group-Steering Cylinder; -Anti-Theft, 2-Wheel Drive | 1 |
| 14***15 | Sleeve-Steering Lock | 1 |
| 14***18 | Pin | 1 |
163-0059 Pump Gp-Metering -Hmu
| 11***75 | Spring | 2 |
| 11***32 | Valve As-Check | 1 |
| 11***80 | Cap | 1 |
172-3368 Steering Column Gp
| 14***77 | Knob; (Steering Column Tilt) | 1 |
| 14***80 | Kit-Gas Spring | 1 |
| 14***82 | Kit-Tilt Lever | 1 |
117-8537 Steering Gp-Hydraulic
| 10***32 | Boot | 1 |
| 10***34 | Ring | 1 |
| 10***36 | Ring | 1 |
153-9580 Steering Wheel Gp
| 14***91 | Steering Wheel As | 1 |
| 15***68 | Plug | 1 |
| 15***80 | Steering Wheel Group | 1 |
188-7471 Valve Gp-Priority -Steering
| 10***54 | Spring | 1 |
| 18***57 | Seat As | 1 |
| 18***71 | Valve Group-Priority; -Steering | 1 |
148-8988 Valve Gp-Solenoid
| 06***39 | Seal-O-Ring | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
171-8775 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***35 | Kit-Seal | 1 |
| 15***70 | Nut; (1/2-20-2b-Thd) | 1 |
121-4036 Valve Gp-Solenoid
| 10***07 | Kit-Connecting Plug; (2-Pin)(Electronic Control) | 1 |
| 12***36 | Valve Group-Solenoid; -Transmission | 1 |
| 12***35 | Kit-Seal | 1 |
148-8986 Valve Gp-Solenoid
| 06***39 | Seal-O-Ring | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***11 | Coil As; (Forward) | 1 |
142-1468 Valve Gp-Solenoid
| 06***39 | Seal-O-Ring | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
Work Tools
111-8634 Bucket Ar-Multipurpose
| 10***65 | Bucket Group-Multipurpose | 1 |
| 11***34 | Bucket Ar-Multipurpose | 1 |
| 18***39 | Cylinder Group-Multipurpose Bukt | 2 |
112-0939 Bucket Ar-Multipurpose
| 10***10 | Fork Group; Fork Gp | 1 |
| 11***39 | Bucket Ar-Multipurpose; Bucket Ar-Multipurpose | 1 |
| 11***78 | Bucket Group-Multipurpose | 1 |
112-0941 Bucket Ar-Multipurpose
| 10***87 | Film-Identification; (Bucket Level) | 1 |
| 11***39 | Bucket Ar-Multipurpose; Bucket Ar-Multipurpose | 1 |
| 11***41 | Bucket Ar-Multipurpose | 1 |
111-8636 Bucket Ar-Multipurpose
| 10***87 | Film-Identification; (Bucket Level) | 1 |
| 11***34 | Bucket Ar-Multipurpose | 1 |
| 11***36 | Bucket Ar-Multipurpose | 1 |
112-0938 Bucket Ar-Multipurpose
| 10***36 | Bucket Group-Multipurpose | 1 |
| 11***38 | Bucket Ar-Multipurpose; Bucket Ar-Multipurpose | 1 |
| 18***39 | Cylinder Group-Multipurpose Bukt | 2 |
112-0940 Bucket Ar-Multipurpose
| 10***87 | Film-Identification; (Bucket Level) | 1 |
| 11***38 | Bucket Ar-Multipurpose; Bucket Ar-Multipurpose | 1 |
| 11***40 | Bucket Ar-Multipurpose | 1 |
111-8637 Bucket Ar-Multipurpose
| 10***12 | Fork As | 2 |
| 10***87 | Film-Identification; (Bucket Level) | 1 |
| 11***35 | Bucket Ar-Multipurpose | 1 |
111-8635 Bucket Ar-Multipurpose
| 10***64 | Bucket Group-Multipurpose | 1 |
| 10***10 | Fork Group; Fork Gp | 1 |
| 11***35 | Bucket Ar-Multipurpose | 1 |
9r-5201 Bucket As-General Purpose
| 9R***11 | Bearing-Sleeve | 2 |
| 9R***36 | Bracket As-Lift; (Rh) | 2 |
| 9R***43 | Bracket As-Lift; (Rh) | 2 |
9r-5989 Bucket Gp-General Purpose
| 9R***11 | Bearing-Sleeve | 2 |
| 9R***36 | Bracket As-Lift; (Rh) | 2 |
| 9R***43 | Bracket As-Lift; (Rh) | 2 |
108-3036 Bucket Gp-Multipurpose
| 10***36 | Bucket Group-Multipurpose | 1 |
| 10***37 | Bulldozer As | 1 |
| 25***46 | Clam As-Multipurpose Bucket | 1 |
104-3964 Bucket Gp-Multipurpose
| 10***64 | Bucket Group-Multipurpose | 1 |
| 10***66 | Bulldozer As | 1 |
| 25***51 | Clam As-Multipurpose Bucket | 1 |
104-3965 Bucket Gp-Multipurpose
| 10***65 | Bucket Group-Multipurpose | 1 |
| 10***67 | Bulldozer As | 1 |
| 25***51 | Clam As-Multipurpose Bucket | 1 |
112-1778 Bucket Gp-Multipurpose
| 11***77 | Bulldozer As | 1 |
| 11***78 | Bucket Group-Multipurpose | 1 |
| 25***46 | Clam As-Multipurpose Bucket | 1 |
104-6310 Fork Gp
| 10***10 | Fork Group; Fork Gp | 1 |
| 10***11 | Bracket As | 2 |
| 10***12 | Fork As | 2 |
112-0942 Fork Gp
| 10***10 | Fork Group; Fork Gp | 1 |
| 10***87 | Mounting Group-Fork | 1 |
| 11***42 | Fork Group | 1 |
9r-5202 Bucket As-General Purpose
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 19***96 | Bucket As-General Purpose | 1 |
190-7596 Bucket As-General Purpose
| 19***96 | Bucket As-General Purpose | 1 |
| 9R***11 | Bearing-Sleeve | 2 |
| 9R***36 | Bracket As-Lift; (Rh) | 2 |
9r-5988 Bucket As-General Purpose
| 19***97 | Bucket As | 1 |
| 9R***11 | Bearing-Sleeve | 4 |
| 9R***76 | Edge | 2 |
191-9555 Bucket As-Hoe -Ditch Cleaning
| 12***38 | Edge-Cutting | 1 |
| 19***54 | Plate; (Torque) | 1 |
| 19***55 | Bucket As-Hoe; -Ditch Cleaning | 1 |
197-5081 Bucket As-Hoe
| 15***02 | Bracket As; (Lh) | 1 |
| 15***03 | Bracket As; (Rh) | 1 |
| 16***80 | Bearing-Sleeve | 2 |
197-5073 Bucket As-Hoe -Heavy Duty
| 13***82 | Edge; (Center) | 1 |
| 13***84 | Edge; (Lh) | 1 |
| 13***85 | Edge; (Rh) | 1 |
197-5064 Bucket As-Hoe
| 13***87 | Edge | 1 |
| 15***02 | Bracket As; (Lh) | 1 |
| 15***03 | Bracket As; (Rh) | 1 |
197-5065 Bucket As-Hoe
| 13***88 | Edge | 1 |
| 15***02 | Bracket As; (Lh) | 1 |
| 15***03 | Bracket As; (Rh) | 1 |
198-4531 Bucket As-Hoe
| 16***30 | Plate-Identification; (Cat) | 2 |
| 19***31 | Bucket As-Hoe | 1 |
| 19***40 | Edge | 1 |
198-8566 Bucket As-Hoe
| 16***30 | Plate-Identification; (Cat) | 2 |
| 19***66 | Bucket As-Hoe | 1 |
| 20***21 | Edge | 1 |
198-8574 Bucket As-Hoe
| 19***53 | Edge | 1 |
| 19***74 | Bucket As-Hoe | 1 |
| 4T***04 | Adapter | 5 |
192-2826 Bucket As-Hoe -Ditch Cleaning
| 19***59 | Bracket As | 2 |
| 19***63 | Plate; (Torque) | 1 |
| 19***67 | Edge-Cutting | 1 |
196-7492 Bucket As-Hoe -Heavy-Duty
| 11***04 | Adapter-Strap | 5 |
| 13***84 | Edge; (Lh) | 1 |
| 13***85 | Edge; (Rh) | 1 |
197-5079 Bucket As-Hoe -Extreme Service
| 13***46 | Edge-Cutting | 1 |
| 15***02 | Bracket As; (Lh) | 1 |
| 15***03 | Bracket As; (Rh) | 1 |
198-4539 Bucket As-Hoe
| 19***39 | Bucket As-Hoe | 1 |
| 19***55 | Edge | 1 |
| 4T***04 | Adapter | 6 |
197-5072 Bucket As-Hoe -Heavy Duty
| 13***81 | Edge; (Center) | 1 |
| 13***84 | Edge; (Lh) | 1 |
| 13***85 | Edge; (Rh) | 1 |
197-5080 Bucket As-Hoe -Extreme Service
| 13***47 | Edge-Cutting | 1 |
| 15***02 | Bracket As; (Lh) | 1 |
| 15***03 | Bracket As; (Rh) | 1 |
197-5066 Bucket As-Hoe
| 13***89 | Edge | 1 |
| 15***02 | Bracket As; (Lh) | 1 |
| 15***03 | Bracket As; (Rh) | 1 |
197-5068 Bucket As-Hoe
| 13***84 | Edge; (Lh) | 1 |
| 13***85 | Edge; (Rh) | 1 |
| 15***27 | Plate | 2 |
197-5076 Bucket As-Hoe -High Capacity
| 13***81 | Edge; (Center) | 1 |
| 13***84 | Edge; (Lh) | 1 |
| 13***85 | Edge; (Rh) | 1 |
191-6262 Bucket As-Hoe -Ditch Cleaning
| 12***38 | Edge-Cutting | 1 |
| 19***54 | Plate; (Torque) | 1 |
| 19***59 | Bracket As | 2 |
197-5071 Bucket As-Hoe -Heavy Duty
| 13***80 | Edge | 1 |
| 13***84 | Edge; (Lh) | 1 |
| 13***85 | Edge; (Rh) | 1 |
197-5077 Bucket As-Hoe -High Capacity
| 13***82 | Edge; (Center) | 1 |
| 13***84 | Edge; (Lh) | 1 |
| 13***85 | Edge; (Rh) | 1 |
197-5063 Bucket As-Hoe
| 15***29 | Bracket As; (Lh) | 1 |
| 15***30 | Bracket As; (Rh) | 1 |
| 15***57 | Bearing-Sleeve | 2 |
191-6263 Bucket As-Hoe -Ditch Cleaning
| 13***91 | Edge-Cutting | 1 |
| 19***55 | Plate; (Torque) | 1 |
| 19***59 | Bracket As | 2 |
200-2201 Bucket As-Hoe
| 13***17 | Edge | 1 |
| 20***01 | Bucket As-Hoe | 1 |
| 20***02 | Plate | 2 |
192-0658 Bucket As-Hoe -Ditch Cleaning
| 19***58 | Bucket As-Hoe; -Ditch Cleaning | 1 |
| 19***62 | Plate; (Torque) | 1 |
| 19***66 | Edge-Cutting | 1 |
198-8568 Bucket As-Hoe
| 16***30 | Plate-Identification; (Cat) | 2 |
| 19***40 | Edge | 2 |
| 19***68 | Bucket As-Hoe | 1 |
198-4533 Bucket As-Hoe
| 19***33 | Bucket As-Hoe | 1 |
| 19***52 | Edge | 1 |
| 4T***04 | Adapter | 3 |
198-4535 Bucket As-Hoe
| 19***35 | Bucket As-Hoe | 1 |
| 19***53 | Edge | 1 |
| 4T***04 | Adapter | 5 |
200-2200 Bucket As-Hoe
| 12***94 | Edge | 1 |
| 20***00 | Bucket As-Hoe | 1 |
| 20***01 | Plate | 2 |
198-8572 Bucket As-Hoe
| 19***21 | Edge | 1 |
| 19***72 | Bucket As-Hoe | 1 |
| 4T***04 | Adapter | 4 |
200-2202 Bucket As-Hoe
| 13***57 | Edge | 1 |
| 20***02 | Bucket As-Hoe | 1 |
| 20***03 | Plate | 2 |
198-4520 Bucket As-Hoe
| 19***20 | Bucket As-Hoe | 1 |
| 19***21 | Edge | 1 |
| 4T***04 | Adapter | 4 |
197-5067 Bucket As-Hoe
| 13***90 | Edge | 1 |
| 15***02 | Bracket As; (Lh) | 1 |
| 15***03 | Bracket As; (Rh) | 1 |
198-8570 Bucket As-Hoe
| 19***52 | Edge | 1 |
| 19***70 | Bucket As-Hoe | 1 |
| 4T***04 | Adapter | 3 |
192-0661 Bucket As-Hoe -Ditch Cleaning
| 13***91 | Edge-Cutting | 1 |
| 19***55 | Plate; (Torque) | 1 |
| 19***61 | Bucket As-Hoe; -Ditch Cleaning | 1 |
200-2198 Bucket As-Hoe
| 15***55 | Edge | 1 |
| 20***98 | Bucket As-Hoe | 1 |
197-5074 Bucket As-Hoe -High Capacity
| 13***79 | Edge | 1 |
| 13***84 | Edge; (Lh) | 1 |
| 13***85 | Edge; (Rh) | 1 |
192-2825 Bucket As-Hoe -Ditch Cleaning
| 19***59 | Bracket As | 2 |
| 19***62 | Plate; (Torque) | 1 |
| 19***66 | Edge-Cutting | 1 |
198-8578 Bucket As-Hoe
| 19***55 | Edge | 1 |
| 19***78 | Bucket As-Hoe | 1 |
| 4T***04 | Adapter | 6 |
198-4537 Bucket As-Hoe
| 19***37 | Bucket As-Hoe | 1 |
| 19***54 | Edge | 1 |
| 4T***04 | Adapter | 5 |
191-6261 Bucket As-Hoe -Ditch Cleaning
| 13***66 | Edge-Cutting | 1 |
| 19***53 | Plate; (Torque) | 1 |
| 19***59 | Bracket As | 2 |
197-5070 Bucket As-Hoe -Heavy Duty
| 13***79 | Edge | 1 |
| 13***84 | Edge; (Lh) | 1 |
| 13***85 | Edge; (Rh) | 1 |
197-5075 Bucket As-Hoe -High Capacity
| 13***80 | Edge | 1 |
| 13***84 | Edge; (Lh) | 1 |
| 13***85 | Edge; (Rh) | 1 |
198-8576 Bucket As-Hoe
| 19***54 | Edge | 1 |
| 19***76 | Bucket As-Hoe | 1 |
| 4T***04 | Adapter | 5 |
192-0657 Bucket As-Hoe -Ditch Cleaning
| 13***66 | Edge-Cutting | 1 |
| 19***53 | Plate; (Torque) | 1 |
| 19***57 | Bucket As-Hoe; -Ditch Cleaning | 1 |
197-5069 Bucket As-Hoe -Heavy Duty
| 13***78 | Edge | 1 |
| 13***84 | Edge; (Lh) | 1 |
| 13***85 | Edge; (Rh) | 1 |
192-0660 Bucket As-Hoe -Ditch Cleaning
| 19***60 | Bucket As-Hoe; -Ditch Cleaning | 1 |
| 19***63 | Plate; (Torque) | 1 |
| 19***67 | Edge-Cutting | 1 |
200-2199 Bucket As-Hoe
| 12***78 | Edge | 1 |
| 20***99 | Bucket As-Hoe | 1 |
| 20***00 | Plate | 2 |
190-1056 Bucket Gp-General Purpose
| 19***56 | Bucket Group-General Purpose | 1 |
| 9R***02 | Bucket As | 1 |
| 9R***66 | Tooth Group-Uni | 1 |
190-1079 Bucket Gp-General Purpose
| 19***79 | Bucket Group-General Purpose | 1 |
| 9R***02 | Bucket As | 1 |
| 9R***20 | Edge Group-Cutting | 1 |
190-1057 Bucket Gp-General Purpose
| 19***57 | Bucket Group-General Purpose | 1 |
| 9R***66 | Tooth Group-Uni | 1 |
| 9R***88 | Bucket As-General Purpose | 1 |
190-1081 Bucket Gp-General Purpose
| 19***81 | Bucket Group-General Purpose | 1 |
| 9R***21 | Edge Group-Cutting | 1 |
| 9R***89 | Bucket As-Loader | 1 |
190-1058 Bucket Gp-General Purpose
| 19***58 | Bucket Group-General Purpose | 1 |
| 9R***66 | Tooth Group-Uni | 1 |
| 9R***89 | Bucket As-Loader | 1 |
190-1080 Bucket Gp-General Purpose
| 19***80 | Bucket Group-General Purpose | 1 |
| 9R***21 | Edge Group-Cutting | 1 |
| 9R***88 | Bucket As-General Purpose | 1 |
197-5087 Bucket Gp-Hoe
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***05 | Tip Group-Penetration | 6 |
| 16***89 | Tack-Fastener | 4 |
197-5094 Bucket Gp-Hoe -Heavy-Duty
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***05 | Tip Group-Penetration | 6 |
| 16***89 | Tack-Fastener | 4 |
197-5091 Bucket Gp-Hoe -Heavy-Duty
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***05 | Tip Group-Penetration | 4 |
| 16***89 | Tack-Fastener | 4 |
197-5086 Bucket Gp-Hoe
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***05 | Tip Group-Penetration | 5 |
| 16***89 | Tack-Fastener | 4 |
197-5100 Bucket Gp-Hoe -Extreme Service
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***05 | Tip Group-Penetration | 4 |
| 16***89 | Tack-Fastener | 4 |
198-8567 Bucket Gp-Hoe -High Capacity
| 19***66 | Bucket As-Hoe | 1 |
| 19***67 | Bucket Group-Hoe; -High Capacity | 1 |
| 1U***02 | Tip-Penetration; (Long) | 1 |
198-4534 Bucket Gp-Hoe -High Capacity
| 19***34 | Bucket Group-Hoe; -High Capacity | 1 |
| 19***35 | Bucket As-Hoe | 1 |
| 1U***02 | Tip-Penetration; (Long) | 1 |
197-5096 Bucket Gp-Hoe -High Capacity
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***05 | Tip Group-Penetration | 5 |
| 16***89 | Tack-Fastener | 4 |
151-7866 Bucket Gp-Hoe
| 13***03 | Tooth-Uni | 1 |
| 13***06 | Tooth Group-Uni | 3 |
| 15***66 | Bucket Group-Hoe | 1 |
197-5097 Bucket Gp-Hoe -High Capacity
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***05 | Tip Group-Penetration | 5 |
| 16***89 | Tack-Fastener | 4 |
197-5103 Bucket Gp-Hoe
| 16***43 | Pin | 1 |
| 16***44 | Pin | 1 |
| 19***83 | Bucket Group-Hoe; -Standard Duty | 1 |
200-2194 Bucket Gp-Hoe
| 13***03 | Tooth-Uni | 1 |
| 13***06 | Tooth Group-Uni | 3 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
200-2196 Bucket Gp-Hoe
| 13***03 | Tooth-Uni | 1 |
| 13***06 | Tooth Group-Uni | 5 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
198-8571 Bucket Gp-Hoe -High Capacity
| 19***70 | Bucket As-Hoe | 1 |
| 19***71 | Bucket Group-Hoe; -High Capacity | 1 |
| 1U***02 | Tip-Penetration; (Long) | 1 |
174-6365 Bucket Gp-Hoe -Heavy Duty
| 15***77 | Bucket Group-Hoe; -Heavy Duty | 1 |
| 16***43 | Pin | 1 |
| 16***44 | Pin | 1 |
197-5101 Bucket Gp-Hoe
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***05 | Tip Group-Penetration | 5 |
| 16***89 | Tack-Fastener | 4 |
197-5089 Bucket Gp-Hoe
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***05 | Tip Group-Penetration | 3 |
| 16***89 | Tack-Fastener | 4 |
198-4536 Bucket Gp-Hoe -High Capacity
| 19***36 | Bucket Group-Hoe; -High Capacity | 1 |
| 19***37 | Bucket As-Hoe | 1 |
| 1U***02 | Tip-Penetration; (Long) | 1 |
197-5104 Bucket Gp-Hoe -Heavy Duty
| 16***43 | Pin | 1 |
| 16***44 | Pin | 1 |
| 19***89 | Bucket Group-Hoe; -Heavy Duty | 1 |
200-2197 Bucket Gp-Hoe
| 13***03 | Tooth-Uni | 1 |
| 13***06 | Tooth Group-Uni | 6 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
198-4519 Bucket Gp-Hoe -High Capacity
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 19***19 | Bucket Group-Hoe; -High Capacity | 1 |
198-8573 Bucket Gp-Hoe -High Capacity
| 19***72 | Bucket As-Hoe | 1 |
| 19***73 | Bucket Group-Hoe; -High Capacity | 1 |
| 1U***02 | Tip-Penetration; (Long) | 1 |
197-5093 Bucket Gp-Hoe -Heavy-Duty
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***05 | Tip Group-Penetration | 5 |
| 16***89 | Tack-Fastener | 4 |
197-5102 Bucket Gp-Hoe -Extreme Service
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***05 | Tip Group-Penetration | 6 |
| 16***89 | Tack-Fastener | 4 |
198-4532 Bucket Gp-Hoe -High Capacity
| 19***32 | Bucket Group-Hoe; -High Capacity | 1 |
| 19***33 | Bucket As-Hoe | 1 |
| 1U***02 | Tip-Penetration; (Long) | 1 |
174-6362 Bucket Gp-Hoe
| 15***66 | Bucket Group-Hoe | 1 |
| 16***43 | Pin | 1 |
| 16***44 | Pin | 1 |
198-4530 Bucket Gp-Hoe -High Capacity
| 19***30 | Bucket Group-Hoe; -High Capacity | 1 |
| 19***31 | Bucket As-Hoe | 1 |
| 1U***02 | Tip-Penetration; (Long) | 1 |
194-2065 Bucket Gp-Hoe
| 15***54 | Edge | 1 |
| 15***57 | Bearing-Sleeve | 2 |
| 16***43 | Pin | 1 |
151-7877 Bucket Gp-Hoe -Heavy Duty
| 13***03 | Tooth-Uni | 1 |
| 13***06 | Tooth Group-Uni | 3 |
| 15***77 | Bucket Group-Hoe; -Heavy Duty | 1 |
197-5083 Bucket Gp-Hoe
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***05 | Tip Group-Penetration | 3 |
| 16***89 | Tack-Fastener | 4 |
197-5085 Bucket Gp-Hoe
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***05 | Tip Group-Penetration | 5 |
| 16***89 | Tack-Fastener | 4 |
198-4538 Bucket Gp-Hoe -High Capacity
| 19***38 | Bucket Group-Hoe; -High Capacity | 1 |
| 19***39 | Bucket As-Hoe | 1 |
| 1U***02 | Tip-Penetration; (Long) | 1 |
198-8579 Bucket Gp-Hoe -High Capacity
| 19***78 | Bucket As-Hoe | 1 |
| 19***79 | Bucket Group-Hoe; -High Capacity | 1 |
| 1U***02 | Tip-Penetration; (Long) | 1 |
199-5971 Bucket Gp-Hoe -Heavy Duty
| 16***43 | Pin | 1 |
| 16***44 | Pin | 1 |
| 19***70 | Bucket Group-Hoe; -Heavy-Duty | 1 |
198-8569 Bucket Gp-Hoe -High Capacity
| 19***68 | Bucket As-Hoe | 1 |
| 19***69 | Bucket Group-Hoe; -High Capacity | 1 |
| 1U***02 | Tip-Penetration; (Long) | 1 |
197-5092 Bucket Gp-Hoe -Heavy-Duty
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***05 | Tip Group-Penetration | 5 |
| 16***89 | Tack-Fastener | 4 |
197-5084 Bucket Gp-Hoe
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***05 | Tip Group-Penetration | 4 |
| 16***89 | Tack-Fastener | 4 |
197-5095 Bucket Gp-Hoe -High Capacity
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***05 | Tip Group-Penetration | 4 |
| 16***89 | Tack-Fastener | 4 |
200-2193 Bucket Gp-Hoe
| 13***03 | Tooth-Uni | 1 |
| 13***06 | Tooth Group-Uni | 3 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
197-5090 Bucket Gp-Hoe -Heavy-Duty
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***05 | Tip Group-Penetration | 3 |
| 16***89 | Tack-Fastener | 4 |
197-6959 Bucket Gp-Hoe -Coral
| 16***43 | Pin | 1 |
| 16***44 | Pin | 1 |
| 19***56 | Bucket Group-Hoe; -Coral | 1 |
198-8577 Bucket Gp-Hoe -High Capacity
| 19***76 | Bucket As-Hoe | 1 |
| 19***77 | Bucket Group-Hoe; -High Capacity | 1 |
| 1U***02 | Tip-Penetration; (Long) | 1 |
199-5970 Bucket Gp-Hoe -Heavy-Duty
| 12***13 | Edge; (Rh) | 1 |
| 12***49 | Edge; (Rh) | 1 |
| 13***03 | Tooth-Uni | 1 |
200-2195 Bucket Gp-Hoe
| 13***03 | Tooth-Uni | 1 |
| 13***06 | Tooth Group-Uni | 4 |
| 13***34 | Plate-Identification; (Work Tool) | 1 |
197-5098 Bucket Gp-Hoe -High Capacity
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***05 | Tip Group-Penetration | 6 |
| 16***89 | Tack-Fastener | 4 |
196-7489 Bucket Gp-Hoe -Heavy-Duty
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 19***89 | Bucket Group-Hoe; -Heavy-Duty | 1 |
198-8575 Bucket Gp-Hoe -High Capacity
| 19***74 | Bucket As-Hoe | 1 |
| 19***75 | Bucket Group-Hoe; -High Capacity | 1 |
| 1U***02 | Tip-Penetration; (Long) | 1 |
108-3037 Bulldozer As
| 10***70 | Bracket As; (Lh) | 2 |
| 10***75 | Bracket As; (Rh) | 2 |
| 10***37 | Bulldozer As | 1 |
104-3967 Bulldozer As
| 10***67 | Bulldozer As | 1 |
| 10***70 | Bracket As; (Lh) | 2 |
| 10***75 | Bracket As; (Rh) | 2 |
104-3966 Bulldozer As
| 10***66 | Bulldozer As | 1 |
| 10***67 | Bulldozer As | 1 |
| 10***13 | Bracket As | 1 |
112-1777 Bulldozer As
| 10***13 | Bracket As | 1 |
| 10***14 | Bracket | 2 |
| 10***88 | Bracket | 3 |
252-9051 Clam As-Multipurpose Bucket
| 25***51 | Clam As-Multipurpose Bucket | 1 |
| 25***78 | Plate As; (Lh) | 1 |
| 25***80 | Plate As; (Rh) | 1 |
252-9046 Clam As-Multipurpose Bucket
| 25***46 | Clam As-Multipurpose Bucket | 1 |
| 25***78 | Plate As; (Lh) | 1 |
| 25***80 | Plate As; (Rh) | 1 |
178-8849 Coupler Gp-Quick -Backhoe
| 13***77 | Pin | 1 |
| 13***78 | Pin | 1 |
| 17***47 | Coupler Group-Quick; -Backhoe | 1 |
176-6247 Coupler Gp-Quick -Backhoe
| 09***28 | Fitting-Grease | 1 |
| 13***21 | Pin As; (Hook) | 1 |
| 13***23 | Lock Pin | 1 |
9r-5321 Edge Gp-Cutting
| 3F***08 | Bolt-Plow; (5/8-11x2.25-In) | 8 |
| 4K***67 | Nut Rear Support To Frame | 8 |
| 8T***22 | Washer-Hard-To Lock Carrier Rollers | 8 |
9r-5320 Edge Gp-Cutting
| 11***10 | Edge-Cutting | 2 |
| 4F***57 | Bolt-Plow; (5/8-11x2.75-In) | 8 |
| 4K***67 | Nut Rear Support To Frame | 8 |
101-4409 Guard Gp-Bucket
| 10***09 | Guard Group-Bucket | 1 |
| 10***10 | Guard As | 1 |
| 10***11 | Retainer As | 2 |
101-4408 Guard Gp-Bucket -Front Bucket
| 10***08 | Guard Group-Bucket; -Front Bucket | 1 |
| 10***09 | Guard Group-Bucket | 1 |
| 10***15 | Film; (Reflector) | 1 |
178-3593 Mounting Gp-Bucket -Backhoe, Quick Coupler
| 15***79 | Pin | 1 |
| 15***80 | Pin | 1 |
| 17***93 | Mounting Group-Bucket; -Backhoe, Quick Coupler | 1 |
137-3848 Mounting Gp-Bucket -Backhoe, Quick Coupler
| 13***48 | Mounting Group-Bucket; -Backhoe, Quick Coupler | 1 |
| 15***79 | Pin | 1 |
| 3B***19 | Pin-Cotter | 4 |
108-1587 Mounting Gp-Fork
| 10***13 | Bracket As | 1 |
| 10***14 | Bracket | 2 |
| 10***88 | Bracket | 2 |
177-4904 Stop Gp-Bucket -Backhoe
177-4903 Stop Gp-Bucket -Backhoe
| 17***03 | Stop Group-Bucket; -Backhoe | 1 |
| 17***00 | Stop As; (Lh) | 1 |
| 18***73 | Stop As; (Rh) | 1 |
9r-5866 Tooth Gp-Uni
| 13***03 | Tooth-Uni | 8 |
| 4F***57 | Bolt-Plow; (5/8-11x2.75-In) | 16 |
| 4K***67 | Nut Rear Support To Frame | 16 |
420D serial number reference
The PIN plate on a 420D Center-Pivot backhoe loader is riveted to the main frame on the right-hand side near the front axle/loader tower, with a duplicate plate inside the cab near the operator's seat or instrument panel. Older plates show the plain format (3-letter prefix + serial sequence, e.g. FDP01234); machines built after Cat's move to the 17-character ISO PIN carry the same 3-letter prefix embedded near the end of the full string, just ahead of the serial sequence. Read the full plate, not a shortened tag, since the prefix is what determines the correct parts and service manual.
| Prefix | Identifies | Notes |
|---|---|---|
| FDP | 420D Center-Pivot backhoe loader, standard dig-frame, US-built | Serial blocks run FDP00001-07198, FDP07199-18399, and FDP18400-up, spanning early through late 420D production. Fitted with the Cat 3054/3054C 4-cylinder diesel, 4.4L displacement, in the mid-60 kW (85-89 hp) class. |
| BLN | 420D Center-Pivot, standard and IT (Integrated Toolcarrier) loader linkage, US-built | Serial blocks run BLN00001-04543, BLN04544-10299, and BLN10300-up. Earlier blocks are documented with the Cat 3054 diesel; the BLN10300-up block is documented with the 3054C. Full 17-character PIN shows both standard and IT loader-frame configurations under this same prefix, distinguished by a different character elsewhere in the PIN. |
| BMC | 420D Center-Pivot backhoe loader | Serial blocks run BMC00001-00610 and BMC00611-up. Fitted with the Cat 3054 diesel. Plant/region not documented in available literature — confirm with dealer. |
| MBH | 420D Center-Pivot backhoe loader | Single documented serial block, MBH00001-up. Fitted with the Cat 3054C diesel. Plant/region not documented — confirm with dealer. |
| BKC | 420D Center-Pivot backhoe loader, UK-built | Serial block starts near BKC00502-up (parts/service literature references BKC1-up as the nominal start). Engine consistent with the 3054/3054C family shared across other 420D prefixes, not independently confirmed for this block — confirm with dealer. |
| C4T | 420D Center-Pivot backhoe loader, US-built (low-confidence) | Found in serial-lookup references tied to the 420D, block starting near C4T00290. Not corroborated in parts or service manual listings — confirm with dealer before using for parts lookup. |
Frequently asked questions
What engine does the Caterpillar 420D backhoe loader use?
A Cat 3054C four-cylinder diesel of roughly 4.4 L (268 cu in), rated near 85 hp (63 kW) net at 2200 rpm with gross output around 88-89 hp (65-66 kW), depending on the source spec sheet consulted.
What is the operating weight of the Caterpillar 420D?
About 7,150-7,200 kg (15,766-15,772 lb) nominal in base 2WD trim, rising to roughly 9,800 kg (21,605 lb) at maximum configuration with 4WD, cab, and counterweights — weight varies by configuration.
What replaced the Caterpillar 420D?
The Cat 420E succeeded the 420D around 2006, followed later by the 420F and 420F2, and eventually the current suffix-free 420 generation.
What 420D owners discuss
What engine does the Cat 420D backhoe loader run, and what do owners flag on it?
The 420D uses the Cat 3054 / 3054C, a 4.4 L (268 cu in) turbocharged four-cylinder diesel, mechanically governed with no electronic engine controls. Output sits in the 66 kW (88-90 hp) class, varies by market rating. Owners and mechanics call out a blown cylinder-head gasket as a known weak point, showing up as coolant loss near the thermostat housing and timing-cover area. A worn governor actuator on the injection pump is the other recurring complaint, causing surging or rough idle rather than an outright failure. Because the fuel system is mechanical, diagnosis doesn't need a diagnostic laptop - most owners trace issues with a wrench and a cooling-system pressure test. Have your dealer verify any head-gasket or cooling-system repair before returning the machine to service.
What's the most common transmission complaint on the 420D?
The 420D runs a 4-speed power-shuttle/powershift transmission. Recurring complaints: strong pull in 1st gear that fades badly in 2nd, 3rd barely moves the machine on flat ground, and 4th won't reach rated travel speed - sometimes with a clutch-burning smell. Others report the shuttle hesitating or failing to engage forward, while reverse stays normal, after the machine sits idle for several days. Owners trace gear-by-gear power loss to worn clutch packs, since each gear uses its own wet clutch and wear shows up first under load in the higher, less-used gears. Intermittent forward/reverse engagement points more toward a weak transmission charge-pump pressure or a bad shuttle solenoid/connector than the clutch packs themselves.
Why do loader or backhoe hydraulic functions run slow or weak on some 420Ds?
The 420D uses a variable-flow, load-sensing piston pump. When loader lift or tilt runs weak and slow while other functions stay normal, owners usually find the pump isn't destroking correctly or signal/standby pressure is low, rather than a valve fault. When only specific backhoe or loader functions are affected - bucket curl and tilt weak, everything else fine - a sticking or worn spool in the control valve is the more common finding, sometimes traced to debris in the valve bore or a fault in the resolver/signal circuit. A stick or boom that creeps down on its own points to leak-by across a valve spool or cylinder seal, not the pump. Confirming which it is means pulling the pump or valve, so have your dealer or a hydraulic shop verify before replacing parts.
What electrical or sensor issues come up most on the 420D?
Ride control is the most frequently discussed electrical complaint. It uses a nitrogen-charged accumulator on the loader lift circuit, switched in from the dash through a pressure switch and solenoid. Owners report the dash button lighting up without the confirming light on the annunciator panel, or ride control not engaging at all. Troubleshooting typically starts at the harness connectors near the loader-arm sensor and pressure switch, then moves to checking the accumulator's nitrogen precharge - reported figures vary, so confirm the exact spec against your machine's plate rather than assuming a fixed number. Corroded or loose dash and loader-arm harness connectors are the general electrical gremlin on this series, more so than any true control-module fault, since the D-series predates full machine electronic controls. Because the accumulator holds pressurized gas and oil, have your dealer verify before charging or servicing it.
What wear items show up most on a 420D's pins, bushings, and stabilizers?
Boom, dipper, and bucket linkage pins and bushings wear fastest, along with the stabilizer cylinder pins. Loader quick-coupler pins can develop noticeable play on machines used for a lot of impact bucket work. Community consensus is that lack of daily greasing, not normal wear, is the top cause of pin galling and seizure - a grease-point decal near the air filter lists the intervals, and several points need daily attention under heavy use. Clunk or play felt in the bucket linkage or stabilizer feet under load is usually a lubrication and wear check first. If a pin is already seized or galled, have your dealer verify before continuing to operate the boom or stabilizers.
How does the 420D differ from the 420E, and does that matter for troubleshooting?
The 420D runs the mechanically governed Cat 3054/3054C engine with mechanical lever backhoe controls and no emissions electronics. The 420E moved to the Cat C4.4 DIT engine with ACERT technology and higher rated output, and added pilot controls with a switchable pattern for the rear boom. Because both show up together in used listings and parts lookups, owners caution against carrying 420E engine or electronic-control troubleshooting steps over to a 420D - the D's fuel and governor system is entirely mechanical, so ECM- or sensor-based fault steps for the E don't apply.
What should I check before buying a used 420D?
Start the engine cold and watch for smoke, knock, and idle behavior, and check around the thermostat housing and timing cover for the coolant leaks tied to the known head-gasket weak point. Cycle the transmission through all forward and reverse gears under load, watching for the higher-gear power loss and hesitant engagement patterns owners commonly describe. Inspect boom, dipper, bucket, and stabilizer pins and bushings for play, and look for leak-down or pitting on the loader and backhoe cylinders. Test ride control and dash indicator lights, check tire condition, and inspect the cab structure and glass for rust or damage. Pull maintenance records and verify the hour meter against service history - asking prices vary widely by hours and configuration, so treat price alone as a weak signal. If you're not confident judging pin wear or hydraulic leak-down yourself, have your dealer or an experienced operator do a pre-purchase inspection.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 420D part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.