Caterpillar 416F
Specifications · fluids and capacities · attachment guidance
Post a parts request and compare supplier quotes.
Caterpillar 416F specifications
Engine
| Bore | 105 mm (4.13 in) |
| Stroke | 127 mm (5 in) |
| Gross Power (ISO 14396) | 70 kW (94 hp) |
| Net Power (ISO 9249) | 66 kW (88 hp) |
| Net Peak Power (1,800 rpm, ISO 9249) | 68 kW (91 hp) |
Weights
| Operating Weight (Maximum) | 11,000 kg (24,251 lb) |
| Operating Weight (Nominal) | 6,750 kg (14,881 lb) |
Dimensions
| Turning Circle (Outside, Front Wheels) | 8.18 m (26.8 ft) |
| Turning Circle (Outside, Widest Loading Bucket) | 10.97 m (36 ft) |
Performance
| Dig Depth (Standard) | 4,360 mm (14.3 ft) |
| Dig Depth (E-Stick Extended) | 5,441 mm (17.9 ft) |
| Reach from Swing Pivot (Standard) | 5,612 mm |
| Reach from Swing Pivot (E-Stick Extended) | 6,652 mm (21.83 ft) |
| Bucket Dig Force (Standard) | 57.7 kN (12,973 lb) |
| Bucket Dig Force (E-Stick Extended) | 56.9 kN (12,791 lb) |
| Stick Dig Force (Standard) | 32.38 kN (7,279 lb) |
| Stick Dig Force (E-Stick Extended) | 23.79 kN (5,350 lb) |
| Loading Height (Standard) | 3,643 mm |
| Loading Height (E-Stick Extended) | 4,170 mm |
| Lift Capacity at Full Height (Single Tilt) | 3,062 kg (6,751 lb) |
| Bucket Breakout Force (Single Tilt) | 47.9 kN (10,772 lb) |
Service capacities (summary)
| Fuel Tank | 170 L (45 gal) |
| Hydraulic System | 90 L (23.8 gal) |
| Hydraulic Tank | 42 L (11.1 gal) |
| Engine Oil (With Filter) | 7.6 L (2 gal) |
| Cooling System | 22 L (5.8 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
416F fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Cooling System | 22 L (5.8 US gal) | |
| Hydraulic System | 90 L (23.8 US gal) | |
| Hydraulic Tank | 42 L (11.1 US gal) |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
416F attachments & work tools
Loader Buckets
The machine is equipped with either a general purpose or multi-purpose pin-on bucket.
Loader Teeth Systems
Heavy duty bucket teeth are attached with diagonal pins rather than horizontal pins for easy exchange without the use of special tools.
Hydraulic Pump
The electronic pump torque limiter improves power management and hydraulic performance.
Operator Station
Configurations include canopy, cab, or cab with air conditioning.
Ride Control
The optional Ride Control System smooths the ride in all conditions, including load and carry, highway roading, or moving around the job site.
Four Wheel Drive
The four wheel drive option improves mobility and loader performance in poor underfoot conditions and can be activated on-the-go.
Brake Mode Selector
The optional brake mode selector switch has three positions: two wheel drive, two wheel drive with all wheel braking, and four wheel drive.
Return-to-Dig
The return-to-dig system reduces loading cycle times by bringing the loader bucket back to the dig position with an easy pull of the lever.
Cat Product Link
The optional Cat Product Link system provides remote reporting of machine location and operating system parameters.
Need a specific 416F part?
Search for part references or post a request for supplier quotes in Heavy Parts AI.
Post a parts request and compare supplier quotes.