Caterpillarengine - machine(no series)
Caterpillar 3516
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 3516 is not a mobile machine but a heavy industrial diesel engine in its own right - a 3500-series, V16, four-stroke, turbocharged-aftercooled unit with a 170 mm bore, 190 mm stroke, and roughly 69 L of displacement at about 13:1 compression. Base industrial ratings run from about 1011 to 1492 bkW (1355 to 2000 bhp) at 1200 to 1800 rpm, with generator set and marine builds rated differently for their duty cycle. Bare engine dry weight is around 7,484 kg (16,499 lb); complete packages with generator, radiator, and skid run considerably heavier, commonly from the high 8-tonne range into the mid-teens of tonnes or more depending on configuration. The 3500 series (3508, 3512, 3516, 3520) reached the market in the early 1980s and succeeded Caterpillar's earlier large-bore V-engine lines in similar power classes; the base 3516 rating is still cataloged today for non-regulated markets, while regulated markets moved through the 3516B, 3516C, and Tier 4-compliant 3516E updates. Cat offers the 3516 platform as an industrial mechanical-drive engine (pumps, cranes, dredgers, mining shovels and draglines, material handling), a generator set prime mover for land and offshore drilling and standby power, a marine propulsion engine for tugs, offshore supply vessels, fishing boats and yachts, a land drilling engine in mechanical and electric drilling modules, and a locomotive engine.
Across the 3516 family, the core 69 L V16 architecture and 170 x 190 mm bore and stroke carried forward largely unchanged while Caterpillar layered on updates: later generations added electronic fuel control, improved cooling and fuel efficiency, and progressively tighter emissions compliance through Tier 2, Tier 3, and Tier 4 Final, with some Tier 4 configurations adding aftertreatment. That shared mechanical core keeps machining specs and many wear parts common across the wider 3500-series family, including the 3508 and 3512. In the used and parts market the 3516 matters because of its enormous installed base in oil field drilling, marine propulsion, and standby/prime power fleets worldwide, and because units routinely log 25 to 40 years of service. Earlier, mechanically governed 3516 engines remain popular for remote and rebuild-friendly applications that favor simpler fuel systems, while the long production run and platform commonality keep demand strong for oil analysis-driven maintenance, turbocharger exchange, and top end and major overhaul parts.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 3516 specifications
Engine
| Model / configuration | Cat 3516, V-16, 4-stroke-cycle diesel, turbocharged aftercooled. Later 3516B, 3516C and 3516E families use different bore/stroke and are distinct model lines, not covered here. |
| Cylinders | 16, V-16 arrangement |
| Power rating, industrial (non-certified) | 1011-1492 bkW (1355-2000 bhp) at 1200-1800 rpm, intermittent (IND-C) rating for global non-regulated markets |
| Power rating, generator set 50 Hz | 1600 ekW / 2000 kVA standby at 1500 rpm, 400-415 V (also offered at 1825 kVA prime, 1600 kVA continuous) |
| Power rating, generator set 60 Hz | approximately 1450-1750 ekW standby at 1800 rpm (near 1600 ekW prime, 1450 ekW continuous); figure from a single source, treat as approximate |
| Displacement | 69.0 L (4210 in³) |
| Bore x stroke | 170 mm x 190 mm (6.7 x 7.5 in) |
| Compression ratio | 13.0:1 |
| Aspiration | Turbocharged, aftercooled |
| Emissions tier | Base industrial rating supplied non-certified for non-regulated markets; generator set packages offer an optional Tier 4 clean-emissions module for regulated markets |
Weights
| Net dry weight, bare engine | 7484 kg (16,499 lb), basic operating engine without optional attachments |
| Dry weight, packaged generator set (maximum) | 15,350 kg (33,840 lb) |
| Shipping weight | Not separately published beyond net dry weight; add optional attachment or package weight per configuration |
| Ground pressure | Not applicable - stationary industrial engine, not a mobile machine |
Dimensions
| Bare engine length x width x height | 3366 x 1703 x 1720 mm (133 x 67 x 68 in), approximate, final dimensions depend on selected options |
| Generator set package length x width x height (maximum) | 5953 x 2286 x 2410 mm (234.4 x 90 x 94.9 in) |
| Generator set package dimensions (alternate factory drawing, same base engine) | 5919 x 2286 x 2367 mm (232.9 x 90 x 93.2 in) - package footprint varies with radiator, enclosure and voltage/frame options |
| Flywheel / flywheel housing | SAE No. 00, counterclockwise rotation viewed from flywheel end |
Performance
| Rated speed range | 1200-1800 rpm depending on power rating selected |
| Peak torque | 8391 N·m (6189 lb-ft) at 1400 rpm, on the 1492 bkW (2000 bhp) @ 1800 rpm curve |
| Torque at rated speed | 7914 N·m (5837 lb-ft) at 1800 rpm, on the 1492 bkW (2000 bhp) rating |
| Heat rejection, 1600 ekW / 2000 kVA standby genset rating | jacket water 1055 kW; total exhaust 1532 kW; aftercooler 232 kW |
| Travel speed / gradeability / lift-dig-dump | Not applicable - stationary and industrial power unit, not a mobile earthmoving machine |
Service capacities (summary)
| Engine oil (lubrication system refill) | 401.3 L (424 qt), basic engine |
| Cooling system (engine coolant capacity, generator set configuration) | 233 L (61.6 gal); varies with radiator, remote-cooling, or heat-exchanger arrangement selected |
| Fuel tank | Not published for the bare engine; tank sizing is application-specific and selected per generator set or installed equipment |
| Fuel consumption reference (1600 ekW / 2000 kVA standby genset, 50 Hz) | 420.9 L/hr (111.2 gal/hr) at 100% load; 317.5 L/hr (83.9 gal/hr) at 75% load; 226.0 L/hr (59.7 gal/hr) at 50% load; 132.1 L/hr (34.9 gal/hr) at 25% load |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
3516 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (lube oil system, with filter) | 189 to 810 L (50.0 to 214 US gal) depending on power rating and sump configuration. The standard industrial rating (1492 bkW/2000 bhp @ 1800 rpm, shallow oil pan) carries 401.3 L (106.0 US gal) per the factory spec sheet — treat this as the baseline figure. Lower-rated builds run closer to 189-194 L (50-51 US gal); deep-sump and marine propulsion builds of the 3516 line run much larger, up to roughly 810 L (214 US gal). Varies by configuration/series — confirm sump size for the exact serial/rating before ordering fill quantity. | Cat DEO (Diesel Engine Oil) is the long-standing factory-fill standard for this engine family; current builds spec Cat DEO-ULS as the preferred oil. Viscosity by climate: SAE 15W-40 for ambient temperatures above about -18°C (0°F); SAE 10W-30 for colder ambient down to roughly -30°C. Only multigrade oils meeting the diesel engine oil spec are approved — single-grade oils are not called for. |
| Cooling system (jacket water circuit) | 157 to 235 L (41.5 to 62.0 US gal) depending on rating and cooling arrangement (keel-cooled vs. heat-exchanger vs. radiator, jacket-water aftercooled vs. separate-circuit aftercooled). Industrial rating spec sheets consistently show 233.0 L (61.6 US gal) as the baseline figure for the 3516 line. | Cat ELC (Extended Life Coolant), premixed or mixed to the specified water ratio. Where ELC is not used, a Cat-approved heavy-duty coolant/antifreeze with supplemental coolant additive (SCA) maintained on schedule is acceptable. ELC service life extends to roughly 12,000 hours or 6 years before change. Glycol ratio is set by ambient/freeze-protection needs at the jobsite or vessel, not by a separate cold-weather coolant grade. |
| Fuel tank / fuel system | No fixed engine-mounted tank capacity specified. The 3516 is sold as a bare power unit (industrial, generator set, marine propulsion, land-drilling, or pump-drive package); the fuel tank or day tank is furnished and sized by the OEM or system integrator, not documented in the engine OMM. | Diesel fuel meeting Cat's No. 1-D/No. 2-D distillate specification (ASTM D975) or the equivalent EN590 grade, matched to ambient temperature to control fuel waxing in cold climates. No brand-name fuel additive is specified as standard fill. |
| Transmission / powertrain compartment | Not applicable. The 3516 engine carries no integral transmission — any marine gear, generator coupling, or drilling transmission bolted to it is a separate OEM component serviced under that equipment's own manual, not the engine OMM. | Not applicable to the bare engine package. |
| Final drives | Not applicable — the 3516 is an engine-only product with no final drive assemblies. | Not applicable. |
| Hydraulic system and tank | Not applicable to the bare engine. The engine-mounted governor carries its own small self-contained synthetic oil sump, which is not a machine-scale hydraulic system and has no published refill capacity. | The governor sump uses a self-contained synthetic lubricant sealed at the factory; no field-fill hydraulic oil recommendation applies to the bare engine package. |
| Axles / differentials | Not applicable — no axles or differentials are part of the engine package. | Not applicable. |
| Grease (external linkage / accessory points, spec only) | Spec only — no reservoir or per-point capacity is published for the bare engine package. | Cat Multipurpose Grease (NLGI Grade 2) applied at governor linkage, external actuator and accessory-drive grease points per the lubrication schedule. No separate cold-weather grease grade is called out for this engine. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 3516 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 6,000 h |
|
| Every 9,000 h |
|
Servicing the 3516 beyond the schedule
Predictive Maintenance & Fluid Analysis
Run oil sampling on the 3516's 69 L V16 crankcase every 250 hours to catch bearing and liner wear before it reaches the cylinder pack. Pull Level 1 coolant samples at 500 hours and test SCA concentration between changes to protect the wet cylinder liners from cavitation. Trend turbocharger boost pressure and exhaust pyrometer readings against baseline to spot fouling or wear early. Log crankshaft vibration damper condition and run generator vibration surveys on genset packages to flag imbalance before it damages mounts or bearings.
Corrective & Common Repairs
Turbocharger bearing and seal wear is the most common high-hour failure on the 3516's V16, especially on hard-running land drilling duty cycles. Aftercooler cores foul with dust and drilling mud on rig and mine sites, cutting power and pushing exhaust temperatures up - clean or replace when boost falls off baseline. Exhaust manifold and turbo housing cracking follows repeated thermal cycling on standby gensets. Check unit injector timing, fuel line chafing, and control wiring harness connectors for corrosion at each teardown.
Overhaul & Rebuild Points
Plan the first top end overhaul on cylinder heads, injectors, and valve gear between roughly 7,500 and 11,000 hours depending on the engine's rated rpm; the second top end overhaul follows at roughly double that. Inspect the 170 x 190 mm cylinder liners and piston rings for scoring and ring-land wear at teardown, and check crankshaft main and rod bearing clearance. Verify camshaft lobe and gear train wear, and fit a fresh turbocharger cartridge rather than reusing worn bearings once the block is opened.
Seasonal & Environment Servicing
On marine and offshore genset installs, inspect the raw water pump impeller each season and protect the block and aftercooler from salt-air corrosion. In cold-climate land drilling, run jacket water heaters and confirm coolant freeze protection before winter startup on the engine's cooling system. On dusty rig and mine sites, clean radiator and aftercooler fins more often than the standard 250-hour interval and service the air precleaner daily. Drain fuel-water separators more frequently in humid or high-condensation environments.
3516 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 1D-4540 | Bolt,Machine Fuel Filter Mounting | Fuel system service | Check fitment → |
| 255-2282 | Switch As-Pressure | Fuel system service | Check fitment → |
| 6I-2509 | Filter Element As-Air | Air intake service | Check fitment → |
| 6I-2510 | Filter Element As-Air | Air intake service | Check fitment → |
| 118-3365 | Element-Heater | Hydraulic service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
3516 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| Cylinder [#] Open (CID 1-16, FMI 05) — displayed as "Cylinder [#] Open, Reduce Power Now" | ECM has lost continuity on the injector solenoid circuit for the numbered cylinder. | Broken, loose, or corroded wiring or connector at the injector harness for that cylinder; failed solenoid coil. | With the engine safe to inspect, check and wiggle-test the harness and connector at the affected cylinder; repair or replace wiring or solenoid. Engine may self-derate until the fault clears. |
| CID 0091 FMI 08 (Throttle Position Sensor — abnormal signal) | ECM sees an abnormal frequency, pulse width, or period from the throttle/speed-setting input. | Faulty throttle position sensor, damaged wiring, or a loose connector. | Inspect sensor wiring and connector, verify sensor calibration with Cat ET, replace sensor if signal remains abnormal. |
| CID 0110 FMI 03/04 (Engine Coolant Temperature Sensor — voltage above/below normal) | Coolant temperature sensor circuit reading is outside the valid range. | Open or shorted sensor circuit, corroded connector, or failed sensor. | Check wiring for an open circuit or short to ground/power, test sensor resistance against spec, replace sensor if out of range. |
| CID 0100 FMI 03/04 (Engine Oil Pressure Sensor — voltage above/below normal) | Oil pressure sensor signal is outside the valid range. | Sensor wiring fault, corroded connector, or failed sensor. | Inspect sensor wiring and connector, cross-check actual oil pressure with a mechanical gauge, replace sensor if the electrical signal does not match. |
| CID 0190 FMI 02 (Engine Speed/Timing Sensor — erratic, intermittent, or incorrect) | ECM is receiving an erratic signal from the primary speed/timing sensor. | Sensor air gap out of specification, damaged timing wheel, or wiring/connector issue. | Check sensor mounting and air gap, inspect wiring, replace sensor if erratic signal continues. |
| CID 0247 FMI 09 (Data Link — abnormal update rate) | ECM has lost normal communication on the data link to the control/monitoring panel. | Damaged data link wiring, loose connector, missing termination resistance, or a failed module on the link. | Check data link wiring and connectors, verify termination resistors, confirm all linked control modules are powered and responding. |
| Low Engine Oil Pressure — Warning/Shutdown event (exact panel event number varies by control panel generation) | Oil pressure has dropped below the safe threshold for current engine speed and load. | Low oil level, plugged oil filter, worn oil pump, or a faulty oil pressure sensor. | Check oil level and filter condition immediately; if both are correct, verify the sensor before returning the engine to extended service. Shutdown-level events stop the engine automatically. |
| High Engine Coolant Temperature — Warning/Shutdown event (exact panel event number varies by control panel generation) | Coolant temperature has exceeded the safe operating threshold. | Low coolant level, blocked radiator or heat exchanger, failed water pump, or a stuck thermostat. | Check coolant level and look for external leaks, inspect the cooling circuit for blockage, verify temperature sensor accuracy if the physical system checks out. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
3516 attachments & work tools
Generator set arrangement (60 Hz)
Packaged as a diesel generator set, the 3516 is rated 1450-1750 ekW for prime, continuous, and standby duty on 60 Hz systems. The package accepts 100% load in one step and is built to ISO 8528-5 transient response and NFPA 110 loading requirements.
Generator set arrangement (50 Hz)
On 50 Hz systems the same base engine is packaged as a generator set rated 1600-2000 kVA for mission-critical, continuous, prime, and standby service. Exact kW/kVA and emissions calibration vary by arrangement number, so confirm against the specific rating plate.
Control panel / switchgear options
Gensets pair with Cat EMCP control platforms: EMCP II (with optional NFPA 99/110 alarm module, customer interface module, and synchronizing module) through EMCP 3.x with remote monitoring, up to the EMCP 4.x digital panel. Panel selection sets metering, protection, and synchronizing capability on the set.
Control cubicle mounting position
Packaged 3516 gensets use a modular rear-overhang control layout, with the control cubicle mountable at rear-right, rear-left, front-right, or front-left of the skid to suit enclosure and switchgear layout.
Industrial power-unit duty ratings
As a non-generator industrial diesel engine the 3516 is offered at roughly 1011-1492 bkW (1355-2000 bhp) at 1200-1800 rpm depending on rating chosen. Factory duty applications listed include bore/drill rigs, chippers and grinders, construction, cranes, dredgers, forestry, general industrial drive, material handling, mining, mobile earthmoving equipment, pumps, shovels/draglines, surface hauling equipment, and trenchers.
Land drilling mechanical-drive arrangement
For mechanical land rig drive the 3516 is matched to a torque converter and an air-clutch drive group (layshaft with drum, spider, and drum hub) feeding the drawworks/rotary table. The 3516 is also offered as part of land drilling generator set packages for SCR/AC electric rigs; drive-train hardware in either case is matched to the rig builder's own specification rather than a fixed catalog list.
Pump-drive configuration
Pump-drive rated 3516 engines run roughly 1417-1480 bkW (1900-1985 bhp) at 1460-1750 rpm, varies by arrangement, and are set up for reliable on-demand starting. Standard pump-drive fitment includes a shallow oil pan and RH-service cartridge-type oil filtration to suit skid-mounted pump packages.
Engine mounting and coupling
Driven-equipment coupling uses an SAE-pattern flywheel housing (size varies by arrangement). Standard base mounting is industrial-type C-channel rail; packaged gensets isolate the engine/generator inner base from the outer skid base with vibration isolators to limit transmitted vibration.
Enclosure and cooling packages
3516 generator sets are offered open (skid-mounted, no enclosure) or in a weatherproof, sound-attenuated enclosure for site noise and weather protection. Standard cooling is a self-contained engine-driven radiator rated for ambient up to about 50 degC (122 degF), with a high-ambient radiator offered as an option; dual-circuit cores are used where jacket-water and aftercooler circuits must be cooled separately.
Front power take-off (PTO) kits
Clutch-engaged front PTO kits are offered for the 3516 propulsion engine, shared across the same class with the C18 and 3512, to drive deck hydraulics, pumps, or winches off the front of the engine. Clutch torque options in this product line run roughly 1355-2710 N.m (1000-2000 ft-lb); a PTO-integrated flywheel housing variant is also available where the take-off shares the main flywheel housing rather than a separate front pad.
All 3516 assemblies by section
Every catalogued assembly group for the Caterpillar 3516. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
9y-8267 Cartridge Gp-Turbocharger
| 0S***16 | Screw,Cap,Hexagon H Receptacle Mtg; Bolt Brackets To Firewall Assembly | 4 |
| 1P***20 | Ring-Seal | 1 |
| 1S***70 | Nut (.687" O.D.) | 1 |
106-4699 Aftercooler Gp-Water
| 03***30 | Bolt-Self Locking; (5/16unc X 3/4) | 30 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 0T***65 | Bolt--3/8" X 3 1/2"--Use As Required; Bolt 5t***56 Plate To Cover Gp 4n***72 | 60 |
6i-4559 Air Cleaner Gp
| 10***50 | Film; (Air Cleaner) (Radial Seal) (On Air Cleaner Cover) | 1 |
| 6I***09 | Filter Element As-Air; -Primary | 1 |
| 6I***10 | Filter Element As-Air; -Secondary | 1 |
108-2697 Air Cleaner Gp
| 10***95 | Body As-Precleaner, . Sprocket | 4 |
| 10***97 | Air Cleaner Group | 1 |
| 1M***19 | Seal-O-Ring | 4 |
108-2705 Dust Ejector Gp
| 06***89 | Reducer | 4 |
| 10***05 | Dust Ejector Group | 1 |
| 11***97 | Tube As | 2 |
108-2708 Indicator Gp-Air Filter Change
| 05***31 | Grommet | 4 |
| 10***08 | Indicator Group-Air Filter Change | 1 |
| 1P***86 | Adapter | 4 |
2w-3713 Lines Gp-Air -Turbocharger
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 28 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 30 |
108-2709 Lines Gp-Air
| 10***09 | Lines Group-Air; -Inlet | 1 |
| 11***04 | Tube | 2 |
| 11***05 | Tube | 2 |
2w-3708 Manifold Gp-Exhaust
| 11***71 | Manifold-Exhaust; (Intermediate) | 8 |
| 11***72 | Manifold-Exhaust; (Front Rh) | 2 |
| 11***73 | Manifold-Exhaust; (Rh Rear, Lh Front) | 2 |
108-2710 Muffler Gp
| 10***10 | Muffler Group | 1 |
| 11***90 | Muffler As | 2 |
| 11***95 | Pipe-Extension | 2 |
112-6584 Shield Gp-Exhaust
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 8 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 20 |
| 11***84 | Shield Group-Exhaust | 1 |
4p-4459 Shield Gp-Exhaust
| 03***35 | Bolt-Locking; (5/16-18x0.625-In) | 59 |
| 14***84 | Plate | 1 |
| 1B***90 | Bolt; (5/16-18x1.375-In)(Rh Front Cover) | 2 |
129-9507 Shield Gp-Exhaust
| 03***35 | Bolt-Locking; (5/16-18x0.625-In) | 76 |
| 12***07 | Shield Group-Exhaust | 1 |
| 1W***39 | Shield As-Manifold | 2 |
7e-9497 Turbocharger Gp
| 2A***62 | Screw,Cap,Hexagon H Diode Pig Tail To Grd; (1/4-20x.625 In) | 4 |
| 5P***37 | Washer 5t***54 Plate To 7t***28 Cable As | 4 |
| 6N***59 | Housing-Compressor; (Compressor) | 1 |
115-3306 Turbocharger Gp
| 11***06 | Turbocharger Group | 1 |
| 11***07 | Housing-Turbine | 1 |
| 6N***59 | Housing-Compressor; (Compressor) | 1 |
7c-2864 Turbocharger Gp
| 11***06 | Turbocharger Group | 4 |
| 12***36 | Gasket; (Turbocharger) | 4 |
| 12***15 | Coupling-Elbow | 4 |
Basic Engine
117-0071 Air Compressor Gp
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 3 |
| 11***70 | Air Compressor Group | 1 |
| 11***71 | Air Compressor Group | 1 |
2w-0582 Air Compressor Gp
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 6 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 6 |
| 1W***30 | Pan | 1 |
117-0070 Air Compressor Gp
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 6 |
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 8 |
| 11***29 | Pan | 1 |
1w-8924 Air Compressor Gp
| 1D***40 | Bolt,Machine Fuel Filter Mounting | 2 |
| 1W***24 | Air Compressor Group | 1 |
| 2S***23 | Cover As; (Governor) | 1 |
7e-5538 Camshaft Gp
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 11***08 | Plate | 2 |
| 12***94 | Washer As-Thrust | 2 |
6i-1392 Cover Gp-Accessory Drive -Upper, Rh
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 10 |
| 23***46 | Seal-O-Ring | 1 |
| 23***48 | Seal-O-Ring | 1 |
112-6591 Cover Gp-Cylinder Block
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 104 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 4 |
107-0761 Cover Gp-Flywheel Housing
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 14 |
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 1 |
107-0754 Cover Gp-Front Housing
| 0S***92 | Bolt--Cover To Flywheel Housing | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
| 10***54 | Cover Group-Front Housing | 1 |
7e-8756 Cover Gp-Valve Mechanism
| 10***97 | Cover | 1 |
| 1A***79 | Capscrew (5/16 - 18 Nc X 1 1/2 Gd5, Hex) | 4 |
| 2W***72 | Seal-O-Ring; (221.62mm Id) | 1 |
101-0831 Cover Gp-Valve Mechanism
| 10***31 | Cover Group-Valve Mechanism | 1 |
| 10***97 | Cover | 1 |
| 1A***79 | Capscrew (5/16 - 18 Nc X 1 1/2 Gd5, Hex) | 4 |
8n-0337 Crankshaft Gp
| 12***45 | Bolt As; (5/8-18x4.25-In)(Counterweight) | 48 |
| 12***88 | Crankshaft As | 1 |
| 14***31 | Bearing As-Main; (Standard) | 9 |
101-1228 Cylinder Block As
| 10***28 | Cylinder Block As | 1 |
| 11***93 | Liner-Cylinder | 16 |
| 4W***13 | Plug; (2-1/4-12 Thd) | 2 |
101-1173 Cylinder Block As
| 10***73 | Cylinder Block As | 1 |
| 21***26 | Liner-Cylinder Block | 16 |
| 22***96 | Cap-Crankshaft Bearing | 9 |
106-2780 Cylinder Block As
| 10***80 | Cylinder Block As | 1 |
| 22***96 | Cap-Crankshaft Bearing | 9 |
| 4W***13 | Plug; (2-1/4-12 Thd) | 4 |
101-1242 Cylinder Block As
| 10***42 | Cylinder Block As | 1 |
| 4W***13 | Plug; (2-1/4-12 Thd) | 2 |
| 5P***49 | Washer (For Non-R.O.P.S. & Rollover Group) | 36 |
101-1245 Cylinder Block Gp
| 03***42 | Seal-O-Ring; (11.89mm Id) | 6 |
| 10***42 | Cylinder Block As | 1 |
| 10***45 | Cylinder Block Group | 1 |
115-5156 Cylinder Block Gp
| 03***42 | Seal-O-Ring; (11.89mm Id) | 6 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
| 0T***02 | Bolt; (3/8-16x0.625-In)(Shield To Head) | 16 |
115-5160 Cylinder Block Gp
| 03***42 | Seal-O-Ring; (11.89mm Id) | 6 |
| 10***80 | Cylinder Block As | 1 |
| 11***60 | Cylinder Block Group | 1 |
7e-8420 Cylinder Block Gp
| 03***42 | Seal-O-Ring; (11.89mm Id) | 6 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
| 0T***02 | Bolt; (3/8-16x0.625-In)(Shield To Head) | 16 |
7e-8760 Cylinder Head As
| 11***91 | Insert-Valve Seat; (Exhaust) | 2 |
| 14***45 | Insert-Valve Seat; (0.508-mm Os Od)(Inlet) | 0 |
| 14***46 | Insert-Valve Seat; (Exhaust 0.51-mm Os Od)(Exhaust) | 0 |
131-0411 Cylinder Head As
| 13***07 | Insert-Valve Seat; (Standard)(Intake) | 2 |
| 13***08 | Insert-Valve Seat; (Standard)(Exhaust) | 2 |
| 13***11 | Cylinder Head As | 1 |
172-0838 Cylinder Head As
| 13***06 | Guide-Valve; (Standard)(Intake) | 4 |
| 14***82 | Guide-Valve; (0.508mm Os Od)(Exhaust) | 0 |
| 17***36 | Cylinder Head As | 1 |
242-5326 Cylinder Head As
| 13***06 | Guide-Valve; (Standard)(Intake) | 2 |
| 14***82 | Guide-Valve; (0.508mm Os Od)(Exhaust) | 0 |
| 17***36 | Cylinder Head As | 1 |
131-4339 Cylinder Head As
| 13***13 | Guide-Valve; (Standard) | 4 |
| 13***11 | Cylinder Head As | 1 |
| 13***39 | Cylinder Head As | 1 |
172-0836 Cylinder Head As
| 13***07 | Insert-Valve Seat; (Standard)(Intake) | 2 |
| 13***08 | Insert-Valve Seat; (Standard)(Exhaust) | 2 |
| 14***81 | Insert-Valve Seat; (0.51-mm Os Od)(Intake) | 0 |
156-9137 Cylinder Head Gp
| 12***39 | Valve-Exhaust | 2 |
| 13***11 | Cylinder Head As | 1 |
| 13***14 | Rotocoil As | 4 |
7e-8759 Cylinder Head Gp
| 12***39 | Valve-Exhaust | 2 |
| 13***06 | Guide-Valve; (Standard)(Intake) | 4 |
| 14***82 | Guide-Valve; (0.508mm Os Od)(Exhaust) | 0 |
7e-8758 Cylinder Head Gp
| 11***91 | Gasket-Cylinder Head | 1 |
| 13***20 | Fastener Group-Cylinder Head | 6 |
| 13***21 | Fastener Group-Cylinder Head | 2 |
172-0837 Cylinder Head Gp
| 13***06 | Guide-Valve; (Standard)(Intake) | 4 |
| 13***56 | Seal; (Valve Stem)(Intake) | 2 |
| 14***82 | Guide-Valve; (0.508mm Os Od)(Exhaust) | 0 |
125-7094 Cylinder Head Gp
| 12***39 | Valve-Exhaust | 2 |
| 12***94 | Cylinder Head Group | 1 |
| 13***13 | Guide-Valve; (Standard) | 4 |
8n-7182 Damper Gp
| 19***88 | Damper As | 1 |
| 2M***49 | Washer-Retainer To Fan Bracket Assembly | 10 |
| 5P***50 | Washer-Front Support Frame Assembly To | 6 |
7e-6620 Drive Gp-Accessory
| 0L***26 | Plug -13mm(.512 In.) Outside Dia. | 3 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 36 |
| 10***48 | Gear-Auxiliary Drive; (75-Teeth) | 2 |
7e-7521 Drive Gp-Auxiliary -Lower, Lh
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 1 |
| 10***79 | Adapter As | 1 |
| 12***11 | Shaft As-Pump Drive | 1 |
7e-6612 Drive Gp-Auxiliary -Rear
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 10***21 | Seal; (Dirt) | 1 |
| 11***55 | Seal-Lip Type; (Type) | 1 |
6i-4385 Flywheel Gp
| 5P***39 | Washer-Hard; (28x42x4-mm Thk) | 12 |
| 6I***85 | Flywheel Group | 1 |
| 6I***86 | Flywheel As | 1 |
8n-7174 Gear Gp-Front -Standard Rotation
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 5 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 1 |
7e-6501 Gear Gp-Rear
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 4 |
| 12***50 | Bearing-Sleeve | 1 |
112-5675 Gear Gp-Rear
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 10***65 | Plate-Thrust | 1 |
| 10***68 | Washer-Thrust; (19.50 X 106 X 1.9mm Thk) | 2 |
113-8199 Guard Gp-Damper
| 03***35 | Bolt-Self Locking; 2.22cm(.875 In.) Lg | 6 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 4 |
| 0S***21 | Bolt --Brace To Starting Engine Mounting Pad; Bolt-- Brace To Starting Engine Mounting Pad | 8 |
4p-5219 Housing Gp-Flywheel
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 2 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 7 |
| 1A***60 | Capscrew, Hex Head (1/2 - 13 X 2 G5); (Hex Head) (1/2-13x2 Gd 8 Z) | 2 |
105-4289 Housing Gp-Flywheel
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 7 |
| 10***67 | Adapter | 1 |
| 10***89 | Housing Group-Flywheel | 1 |
101-8103 Housing Gp-Front
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 4 |
| 10***03 | Housing Group-Front | 1 |
| 10***34 | Housing-Accessory Drive | 1 |
8n-7734 Lifting Gp-Engine
| 15***26 | Bracket As | 2 |
| 2B***95 | Cap Screw--Tube Assembly To Air Inlet Pipe | 4 |
| 5P***48 | Washer--Bracket To L.H. Support Rail | 4 |
107-0755 Lines Gp-Air Compressor
| 03***69 | Elbow-Flared; (1/2-14 Nptf) | 3 |
| 06***17 | Elbow-Flared | 1 |
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 1 |
7e-6614 Mounting Gp-Alternator
| 0S***89 | Bolt, Hex. Hd., 5/8"-11 N.C. X 1 3/4" | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 10***24 | Pulley; (8-Groove) | 1 |
112-6592 Pan Gp-Oil
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 10 |
| 10***62 | Dowel | 2 |
6i-2861 Piston & Rod Gp
| 10***30 | Bearing-Connecting Rod; (Standard) | 1 |
| 10***31 | Bearing-Connecting Rod; (0.63-mm Us Id) | 0 |
| 10***32 | Bearing-Connecting Rod; (1.27-mm Us Id) | 0 |
7w-3813 Seal Gp-Crankshaft
| 11***32 | Seal Group-Crankshaft; (Cw Rotation) | 1 |
| 11***33 | Seal Group-Crankshaft; (Ccw Rotation) | 1 |
| 7W***13 | Seal Group-Crankshaft | 1 |
7e-4722 Support Gp-Engine
| 1D***66 | Bolt Bracket Assembly To Yoke | 20 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 20 |
| 7E***21 | Support-Front | 1 |
6i-7797 Support Gp-Engine
| 10***36 | Bracket As-Rh | 1 |
| 10***37 | Bracket As-Lh | 1 |
| 5P***50 | Washer-Front Support Frame Assembly To | 12 |
7e-5314 Valve Mechanism Gp
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 4 |
| 0S***15 | Bolt 19 mm (.75 In.) Long Return Air Console To Enclosed Rops | 1 |
| 12***24 | Base As | 1 |
Cooling System
107-8768 Connection Gp-Water
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 10***68 | Connection Group-Water | 1 |
| 11***94 | Cover | 1 |
100-8007 Cooler Gp-Engine Oil
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
| 10***07 | Cooler Group-Engine Oil | 1 |
| 10***08 | Core Group-Engine Oil Cooler | 1 |
100-8008 Core Gp-Engine Oil Cooler
| 10***08 | Core Group-Engine Oil Cooler | 1 |
| 8L***86 | Seal-O-Ring (Id=16.36mm); (16.36-mm Id) | 1 |
| 9S***85 | Plug--To Seal Hydraulic Pump To Sump Of Limit System | 1 |
115-0573 Core Gp-Oil Cooler -Pump Drive Lubrication
| 11***73 | Core Group-Oil Cooler; -Pump Drive Lubrication | 1 |
| 11***05 | Core As | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
117-4929 Fan Gp-Blower -Radiator
| 11***78 | Spider As-Fan | 1 |
| 11***29 | Fan Group-Blower; -Radiator | 1 |
| 11***31 | Support As | 1 |
117-4933 Fan Gp-Suction
| 11***78 | Spider As-Fan | 1 |
| 11***30 | Support As | 1 |
| 11***32 | Adapter | 1 |
183-7142 Gauge Gp-Coolant Level
| 10***84 | Dial | 1 |
| 18***42 | Gauge Group-Coolant Level; -Engine, Aftercooler | 1 |
| 1W***01 | Gasket | 1 |
6v-6704 Gauge Gp-Coolant Level
| 10***84 | Dial | 1 |
| 2F***06 | Screw-Machine (6-32x. 25in); (6-32x0.25-In) | 1 |
| 6V***04 | Gauge Group-Coolant Level; -Engine, Aftercooler | 1 |
108-2510 Guard Gp-Fan
| 10***50 | Tread | 2 |
| 10***10 | Guard Group-Fan; -Radiator | 1 |
| 11***56 | Guard As-Fan | 1 |
107-8767 Housing & Regulator Gp
| 10***67 | Housing & Regulator Group | 1 |
| 11***74 | Valve As-Vent Line | 1 |
| 13***78 | Housing As-Regulator | 1 |
133-5967 Lines Gp-Turbocharger Water
| 00***81 | Tee-Union; (Flared 37-Deg) | 4 |
| 06***27 | Tee-Flared | 1 |
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 2 |
2w-3707 Lines Gp-Water -Turbo-Turbocharger
| 03***70 | Tee | 4 |
| 06***08 | Bulkhead Tee | 1 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
7e-9221 Lines Gp-Water -Upper
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 40 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 62 |
| 12***56 | Gasket | 2 |
7w-6043 Lines Gp-Water -Aftercooler
| 03***46 | Elbow, 90 Deg Adj., 1/4in. J.I.C. X 7/16in.-14 Str. Thd. | 2 |
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 8 |
107-0753 Lines Gp-Water -Lower
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 2 |
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 2 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
107-8765 Lines Gp-Water -Bypass
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 10***92 | Grommet | 1 |
111-4346 Pump Gp-Water
| 11***46 | Pump Group-Water | 1 |
| 11***47 | Pump Group-Water | 1 |
| 14***62 | Seal-O-Ring | 1 |
166-4381 Pump Gp-Water
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 2 |
| 16***74 | Ring As | 1 |
| 16***76 | Seal Group-Water Pump; (Face Type) | 1 |
111-4347 Pump Gp-Water
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 2 |
| 11***47 | Pump Group-Water | 1 |
| 2P***96 | Retainer | 1 |
122-0505 Pump Gp-Water
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 2 |
| 12***05 | Pump Group-Water | 1 |
| 12***45 | Seal Group-Face; (Water Pump) | 1 |
6i-7796 Radiator Gp
| 10***16 | Elbow-Radiator | 1 |
| 11***40 | Radiator Group | 1 |
| 11***07 | Baffle | 2 |
110-3140 Radiator Gp
| 10***07 | Support As | 2 |
| 10***44 | Tube | 1 |
| 11***07 | Strap As | 1 |
Electrical And Starting System
101-8352 Air Dryer Gp
| 10***52 | Air Dryer Group | 1 |
| 10***69 | Cartridge-Desiccant | 1 |
| 12***95 | Kit-Purge Valve; (Air Dryer) | 1 |
6i-7728 Air Dryer Gp
| 10***52 | Air Dryer Group | 1 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 4 |
| 6I***28 | Air Dryer Group | 1 |
9g-9813 Alarm Gp -Action
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
| 7N***37 | Housing-To Air Start Solenoid Valve | 1 |
9x-7803 Alternator Gp-Charging
| 03***12 | Screw-Forming; (10-24x0.5-In) | 4 |
| 10***31 | Fan-Alternator; (11-Blade) | 1 |
| 10***32 | Collar; (Alternator) | 1 |
316-7251 Alternator Gp-Charging
| 10***31 | Fan-Alternator; (11-Blade) | 1 |
| 18***34 | Nut-Flange; (5/8-18-Thd) | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 2 |
6i-7657 Battery & Wiring Gp
| 10***55 | Sensor Group-Temperature; -Front Brake Oil-Torque Converter Oil-Transmission Oil-Aftercooler-Axle Oil-Rear Brake Oil | 1 |
| 10***11 | Sensor Group-Pressure | 1 |
| 10***61 | Lamp Group-Compartment; -Battery Room-Cab-Pump Room-Hydraulic Oil Cooler Room | 4 |
167-0749 Battery & Wiring Gp
| 03***48 | Clip; (11.11mm .437in Id) | 3 |
| 10***55 | Sensor Group-Temperature; -Front Brake Oil-Torque Converter Oil-Transmission Oil-Aftercooler-Axle Oil-Rear Brake Oil | 1 |
| 10***11 | Sensor Group-Pressure | 1 |
159-4563 Battery Gp
| 15***63 | Battery Group | 1 |
| 3T***60 | Battery | 2 |
7e-9084 Control & Mtg Gp-Engine Elek -Ecm-Advanced
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 2 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 4 |
112-4155 Control Gp-Air Starting
| 00***99 | Tee To Bushing | 2 |
| 00***54 | Nipple-Pipe | 1 |
| 03***77 | Tee-Pipe | 1 |
108-2711 Control Gp-Air Starting
| 00***99 | Tee To Bushing | 2 |
| 00***54 | Nipple-Pipe | 1 |
| 03***77 | Tee-Pipe | 1 |
217-3687 Control Gp-Air Starting
| 00***99 | Tee To Bushing | 2 |
| 00***54 | Nipple-Pipe | 1 |
| 03***77 | Tee-Pipe | 1 |
174-3494 Control Gp-Eng Ratings Elek
| 17***94 | Control Group-Eng Ratings Elek | 1 |
124-7798 Control Gp-Eng Ratings Elek
| 12***98 | Control Group-Eng Ratings Elek | 1 |
| 3E***99 | Plate-Marking | 1 |
135-0201 Control Gp-Eng Ratings Elek
| 13***01 | Control Group-Eng Ratings Elek | 1 |
| 14***82 | Control Group-Eng Ratings Elek | 1 |
3e-5477 Control Gp-Eng Ratings Elek
| 12***88 | Control Group-Electronic | 1 |
| 3E***77 | Control Group-Eng Ratings Elek | 1 |
| 3E***99 | Plate-Marking | 1 |
146-5705 Control Gp-Eng Ratings Elek
| 14***05 | Control Group-Eng Ratings Elek | 1 |
110-7485 Control Gp-Eng Ratings Elek
| 11***85 | Control Group-Eng Ratings Elek | 1 |
| 3E***99 | Plate-Marking | 1 |
124-7796 Control Gp-Eng Ratings Elek
| 12***96 | Control Group-Eng Ratings Elek | 1 |
| 3E***99 | Plate-Marking | 1 |
9x-3207 Control Gp-Electronic -Air Shutoff
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 2 |
| 7N***81 | Housing-Receptacle; (14-Ga To 18-Ga) | 1 |
110-6384 Control Gp-Machine -Engine, Hydraulic Pump
| 11***84 | Control Group-Machine; -Engine, Hydraulic Pump | 1 |
| 11***85 | Film; (Control Module) | 1 |
| 12***65 | Control Group-Machine; -Engine, Hydraulic Pump | 1 |
112-8100 Control Gp-Machine -Engine, Hydraulic Pump
| 11***00 | Control Group-Machine; -Engine, Hydraulic Pump | 1 |
| 9X***11 | Cap | 1 |
156-1019 Control Gp-Machine
| 10***52 | Screw-Pan Head; (8-32x0.375-In) | 1 |
| 15***19 | Control Group-Machine | 1 |
| 15***20 | Software Group-Electronic | 1 |
121-7442 Control Gp-Machine -Underspeed Control Interface
| 12***42 | Control Group-Machine; -Underspeed Control Interface | 1 |
| 3T***45 | Clip As (Sure Seal Connector) | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 6 |
100-5075 Control Gp-Machine -Underspeed Control Interface
| 10***75 | Control Group-Machine; -Underspeed Control Interface | 1 |
| 12***42 | Control Group-Machine; -Underspeed Control Interface | 1 |
124-4365 Control Gp-Machine -Engine, Hydraulic Pump
| 11***85 | Film; (Control Module) | 1 |
| 12***65 | Control Group-Machine; -Engine, Hydraulic Pump | 1 |
123-4248 Control Gp-Machine
| 10***52 | Screw-Pan Head; (8-32x0.375-In) | 1 |
| 12***48 | Control Group-Machine | 1 |
| 14***51 | Control Group-Implement | 1 |
173-4080 Control Gp-Machine
| 10***52 | Screw-Pan Head; (8-32x0.375-In) | 1 |
| 17***80 | Control Group-Machine | 1 |
| 6V***03 | Kit; (Retaining Bolt) (Each Includes Bolt, Retaining Ring And 4 O-Ring Seals) | 2 |
6v-6702 Control Gp-Vids/Vims Main
| 11***36 | Control Group-Electronic; (Vims-Main/Display) | 1 |
| 3E***43 | Film-Module; (Vims) | 1 |
| 6V***02 | Control Group-Vids/Vims Main | 1 |
125-9784 Harness As -Front Shovel
| 12***84 | Harness As; -Front Shovel | 1 |
130-7898 Harness As -Mass Excavation
| 13***98 | Harness As; -Mass Excavation | 1 |
130-7899 Harness As -Mass Excavation
| 13***99 | Harness As; -Mass Excavation | 1 |
125-9783 Harness As -Front Shovel
| 12***83 | Harness As; -Front Shovel | 1 |
116-4695 Heater Gp-Autolube -Barrel
| 11***89 | Heater Group-Autolube; -Blanket | 1 |
| 11***95 | Heater Group-Autolube; -Barrel | 1 |
| 1S***94 | Clip-R.H. Side Engine Support | 1 |
116-4689 Heater Gp-Autolube -Blanket
| 11***89 | Heater Group-Autolube; -Blanket | 1 |
| 12***24 | Heater | 1 |
| 12***25 | Blanket | 1 |
116-4085 Heater Gp-Engine Oil -Engine Oil
| 11***85 | Heater Group-Engine Oil; -Engine Oil | 1 |
| 9W***97 | Switch As-Temperature; (Engine Oil) | 1 |
| 9X***51 | Housing As | 1 |
118-3366 Heater Gp-Hydraulic Oil
| 11***65 | Element-Heater; (Hydraulic Oil) | 2 |
| 11***66 | Heater Group-Hydraulic Oil | 1 |
116-4082 Heater Gp-Jacket Water
| 11***82 | Heater Group-Jacket Water | 1 |
| 6T***64 | Element As-Jacket Water Heater | 4 |
101-0461 Lamp Gp-Working
| 10***61 | Lamp Group-Compartment; -Battery Room-Cab-Pump Room-Hydraulic Oil Cooler Room | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
7x-6399 Lamp Gp-Dome
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
| 7N***37 | Housing-To Air Start Solenoid Valve | 1 |
9x-6775 Lamp Gp-Flood
| 10***52 | Seal | 1 |
| 10***53 | Lens As; (Floodlight) | 1 |
| 10***54 | Body As; (Lamp) | 1 |
171-2065 Lamp Gp-Flood
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***48 | Lens As; (Floodlight) | 1 |
| 15***52 | Bezel | 1 |
9x-1439 Lamp Gp-Flood
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
| 8T***33 | Nut (M10x1.50 Thd) | 1 |
9x-4381 Lamp Gp-Flood -Suspended
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
| 8T***33 | Nut (M10x1.50 Thd) | 1 |
162-3294 Lamp Gp-Flood -24-Volt
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***48 | Lens As; (Floodlight) | 1 |
| 15***52 | Bezel | 1 |
107-2282 Lamp Gp-Signal -Vims Service Indicator
| 10***82 | Lamp Group-Signal; -Vims Service Indicator | 1 |
| 10***83 | Lens-Blue; (Vims Service Indicator) | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
6i-7719 Lighting Gp-Flood
| 5P***85 | Clip; (7.94mm Id) | 5 |
| 6G***63 | Spacer; (10.5x19x28.5-mm Thk) | 1 |
| 6I***19 | Lighting Group-Flood | 1 |
106-4049 Lighting Gp-Front Shovel -Front Shovel
| 10***49 | Lighting Group-Front Shovel; -Front Shovel | 1 |
| 10***79 | Harness As | 1 |
| 10***80 | Harness As; (Suspended Floodlamps) | 1 |
115-5526 Lighting Gp-Mass Excavator
| 10***79 | Harness As | 1 |
| 10***80 | Harness As; (Suspended Floodlamps) | 2 |
| 10***81 | Bracket As | 1 |
172-0208 Lubricator Gp-Air Motor
| 17***08 | Lubricator Group-Air Motor | 1 |
| 18***80 | Kit-Seal; (Air Motor Lubricator) | 1 |
141-7106 Lubricator Gp-Air Motor
| 14***06 | Lubricator Group-Air Motor | 1 |
| 18***80 | Kit-Seal; (Air Motor Lubricator) | 0 |
6v-6649 Module Gp-Vids/Vims Interface
| 14***72 | Module Group-Vids/Vims Interface | 1 |
| 6V***49 | Module Group-Vids/Vims Interface | 1 |
144-7172 Module Gp-Vids/Vims Interface
| 14***72 | Module Group-Vids/Vims Interface | 1 |
| 9X***47 | Film-Identification; (Vids/Vims Interface Module) | 1 |
106-4701 Sensor & Mounting Gp
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 2 |
165-6634 Sensor Gp-Coolant Level -Coolant Loss
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***34 | Sensor Group-Coolant Level; (Water, Coolant)(Scac Expansion Tank) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
111-3794 Sensor Gp-Coolant Level -Coolant Loss
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***94 | Sensor Group-Coolant Level; -Coolant Loss-Aftercooler, Jacket Water | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
3e-7826 Sensor Gp-Exhaust Temperature
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 26***47 | Adapter | 1 |
| 26***49 | Sensor Group-Exhaust Temperature | 1 |
164-2441 Sensor Gp-Exhaust Temperature
| 16***41 | Sensor Group-Exhaust Temperature; -Rh, Lh | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 26***47 | Adapter | 1 |
124-9325 Sensor Gp-Fuel Level
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***25 | Sensor Group-Fuel Level; -Ultrasonic | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
110-6933 Sensor Gp-Fuel Level
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***33 | Sensor Group-Fuel Level | 1 |
| 3E***77 | Wedge-Receptacle Lock; (4-Pin) | 1 |
141-5746 Sensor Gp-Pressure -Air Tank
| 14***46 | Sensor Group-Pressure; -Air Start Lines | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
163-8520 Sensor Gp-Pressure -Turbocharger Outlet
| 16***20 | Sensor Group-Pressure; -Turbocharger Outlet | 1 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
| 9X***13 | Sleeve (Order By cm)(Use As Required) | 0 |
163-8521 Sensor Gp-Pressure -Engine Oil
| 16***21 | Sensor Group-Pressure; -Engine Oil | 1 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
| 9X***13 | Sleeve (Order By cm)(Use As Required) | 0 |
134-0426 Sensor Gp-Pressure -Power Shift Pressure
| 10***08 | Kit; (Connecting Plug) (3 Pin) (Includes Plug As And Wedge) | 0 |
| 10***13 | Seal; (3 Pin Plug) | 1 |
| 13***26 | Sensor Group-Pressure; -Power Shift Pressure | 1 |
6v-1926 Sensor Gp-Pressure -Turbocharger Outlet-Atmospheric Air-Turbocharger Inlet
| 6V***26 | Sensor Group-Pressure; -Turbocharger Outlet-Atmospheric Air-Turbocharger Inlet | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
163-8492 Sensor Gp-Pressure -Atmospheric Air
| 16***92 | Sensor Group-Pressure; -Turbocharger Inlet, Rh, Lh-Atmospheric Air | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
111-8802 Sensor Gp-Pressure -Engine Oil
| 11***02 | Sensor Group-Pressure; -Engine Oil | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
100-4311 Sensor Gp-Pressure
| 10***11 | Sensor Group-Pressure | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
111-8800 Sensor Gp-Pressure -Turbo Inlet, Atmospheric Air
| 11***00 | Sensor Group-Pressure; -Turbo Inlet, Atmospheric Air | 1 |
| 15***89 | Tube; (3cm) | 0 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
6v-1964 Sensor Gp-Pressure -Engine Oil
| 6V***64 | Sensor Group-Pressure; -Engine Oil | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
111-8801 Sensor Gp-Pressure -Turbocharger Outlet
| 11***01 | Sensor Group-Pressure; -Turbocharger Outlet | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
102-1400 Sensor Gp-Pressure -Automatic Lubrication
| 10***00 | Sensor Group-Pressure; -Automatic Lubrication | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
265-9034 Sensor Gp-Speed
| 11***66 | Seal-O-Ring | 1 |
| 13***07 | Washer; (21.1x28.1x0.9-mm Thk) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
102-9029 Sensor Gp-Speed -Timing
| 10***29 | Sensor Group-Speed; -Timing-Engine Speed | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 3 |
| 8L***86 | Seal-O-Ring (Id=16.36mm); (16.36-mm Id) | 1 |
100-3055 Sensor Gp-Temperature -Ambient Air-Pump Drive Lubrication
| 10***55 | Sensor Group-Temperature; -Front Brake Oil-Torque Converter Oil-Transmission Oil-Aftercooler-Axle Oil-Rear Brake Oil | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 8T***32 | Receptacle-Connector; (3-Pin)(Throttle Position Sensor) | 1 |
204-2129 Service Gp-Machine
| 20***29 | Service Group-Machine | 1 |
196-7826 Service Gp-Machine
| 19***26 | Service Group-Machine | 1 |
249-3831 Service Gp-Machine
| 24***31 | Service Group-Machine | 1 |
6i-7787 Starting Aid Gp-Ether
| 10***37 | Tube | 1 |
| 12***03 | Tube | 1 |
| 12***04 | Tube | 1 |
112-4154 Starting Ar-Air
| 11***54 | Starting Ar-Air | 1 |
| 11***55 | Control Group-Air Starting | 1 |
| 12***90 | Starting Motor Group-Air | 1 |
108-2538 Starting Ar-Air
| 10***38 | Starting Ar-Air | 1 |
| 10***11 | Control Group-Air Starting | 1 |
| 4W***34 | Starting Motor Group-Air; -Vane | 1 |
116-4081 Starting Ar-Cold Weather
| 11***81 | Starting Ar-Cold Weather | 1 |
| 11***82 | Heater Group-Jacket Water | 1 |
| 11***83 | Heater Group-Fuel-Coolant | 1 |
121-5890 Starting Motor Gp-Air
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 3 |
| 12***89 | Starting Motor Group-Air; -Inertia Drive | 1 |
| 12***90 | Starting Motor Group-Air | 1 |
4w-6634 Starting Motor Gp-Air -Vane
| 03***46 | Elbow, 90 Deg Adj., 1/4in. J.I.C. X 7/16in.-14 Str. Thd. | 1 |
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 3 |
| 0T***02 | Bolt; (3/8-16x0.625-In)(Shield To Head) | 1 |
121-5889 Starting Motor Gp-Air -Inertia Drive
| 12***89 | Starting Motor Group-Air; -Inertia Drive | 1 |
4w-6633 Starting Motor Gp-Air -Vane
| 03***17 | Washer-Spring | 2 |
| 11***99 | Housing-Motor | 1 |
| 1L***97 | Ring-Snap; (External) | 1 |
209-5230 Starting Motor Gp-Air
| 20***25 | Kit-Overhaul; (Air Starting Motor)(Turbine Air Starter) | 1 |
| 20***26 | Kit-Repair; (Starter Drive)(Air Start Motor) | 1 |
| 20***27 | Kit-Rotor; (Air Starting Motor)(First Stage Air Starter) | 1 |
105-8827 Suppressor Gp-Electronic
| 10***27 | Suppressor Group-Electronic; -Air Conditioner Compressor | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 2 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 2 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
171-8710 Switch Gp-Flow
| 17***10 | Switch Group-Flow; -Coolant | 1 |
126-9243 Switch Gp-Flow -Coolant
| 12***43 | Switch Group-Flow; -Coolant | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
171-8712 Switch Gp-Flow -Coolant
| 17***12 | Switch Group-Flow; -Coolant | 1 |
9x-3040 Switch Gp-Flow -Coolant
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
| 7N***37 | Housing-To Air Start Solenoid Valve | 1 |
172-8660 Switch Gp-Liquid Level
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***60 | Switch Group-Liquid Level; -Rear Engine Oil-Ster, Hydraulic Fan Oil-Engine On-Steering Oil, Engine Off-Auxiliary Coolant-Front Engine Oil-Brake Oil, Hoist-Engine Coolant-Tc Oil-Low, Cold | 1 |
| 9X***01 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 2 |
123-2993 Switch Gp-Liquid Level -Oil
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***93 | Switch Group-Liquid Level; -Engine Oil-Ster, Fan Dr Oil (Engine On)-Torque Converter Oil-Torque Conv Oil (Low, Cold)-Front, Rear Engine Oil-Steering Oil, Engine Off-Torque Conv Oil (Low, Hot)-Auxiliary Coolant-Brake Oil, Hoist-Engine Coolant | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
116-2268 Switch Gp-Position -Ladder
| 11***68 | Switch Group-Position; -Ladder | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 2 |
116-2267 Switch Gp-Position -Ladder
| 11***67 | Switch Group-Position; -Ladder | 1 |
| 11***68 | Switch Group-Position; -Ladder | 1 |
| 12***53 | Film-Instruction; (Drop Down Ladder Pos Switch) | 1 |
9g-7641 Switch Gp-Start -Engine, Key-Vims Service
| 6V***62 | Screw-Machine; (8-32x0.31-In) | 4 |
| 7T***99 | Nut-Mounting; (1-32-Thd) | 1 |
| 9B***33 | Lockwasher; (Int'L Tooth) | 4 |
6i-7631 Tank Gp-Air
| 12***70 | Reservoir | 2 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 16 |
| 6I***31 | Tank Group-Air | 1 |
7e-8098 Thermocouple Gp
| 5N***26 | Connector; Adapter-.25in Pipe Thread | 1 |
| 6K***79 | Clip; (4.76mm Id) | 1 |
| 7E***30 | Thermocouple | 1 |
4d-0487 Valve As-Check -Air Supply-Air, Directional
| 4D***87 | Valve As-Check; -Air Supply-Primary Air Tank-Service Brake Control | 1 |
7t-9074 Valve Gp-Solenoid
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
| 7N***37 | Housing-To Air Start Solenoid Valve | 1 |
188-9250 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 18***50 | Valve Group-Solenoid | 1 |
185-0008 Valve Gp-Solenoid
| 15***70 | Nut; (1/2-20-2b-Thd) | 1 |
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
| 18***08 | Valve Group-Solenoid; -Air Horn | 1 |
115-5525 Wiring Gp-Boom -Mass Excavator
| 11***25 | Wiring Group-Boom; -Mass Excavator | 1 |
| 11***94 | Harness As | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 4 |
111-7964 Wiring Gp-Cab
| 03***00 | Screw; (6-32x0.5-In) | 2 |
| 09***68 | Washer; (5x16x1.2-mm Thk) | 8 |
| 10***19 | Switch As-Rocker; (Dome Lamp) | 1 |
167-0611 Wiring Gp-Cab
| 03***00 | Screw; (6-32x0.5-In) | 2 |
| 09***68 | Washer; (5x16x1.2-mm Thk) | 8 |
| 10***61 | Lamp Group-Compartment; -Battery Room-Cab-Pump Room-Hydraulic Oil Cooler Room | 2 |
123-8904 Wiring Gp-Cold Weather -Rh-Cold Weather Starting
| 09***25 | Clip | 8 |
| 10***13 | Box As | 1 |
| 12***92 | Wire As | 1 |
116-4089 Wiring Gp-Cold Weather -Chassis
| 06***93 | Bushing-Reducer; (1/2-14 Nptf) | 2 |
| 09***25 | Clip | 3 |
| 11***89 | Wiring Group-Cold Weather; -Chassis | 1 |
6i-7648 Wiring Gp-Electronic Control
| 03***00 | Screw; (6-32x0.5-In) | 4 |
| 09***68 | Washer; (5x16x1.2-mm Thk) | 4 |
| 10***75 | Control Group-Machine; -Underspeed Control Interface | 1 |
167-0930 Wiring Gp-Electronic Control
| 03***00 | Screw; (6-32x0.5-In) | 4 |
| 09***68 | Washer; (5x16x1.2-mm Thk) | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
6i-7727 Wiring Gp-Enclosure -Lh
| 03***48 | Clip; (11.11mm .437in Id) | 7 |
| 10***55 | Sensor Group-Temperature; -Front Brake Oil-Torque Converter Oil-Transmission Oil-Aftercooler-Axle Oil-Rear Brake Oil | 1 |
| 10***61 | Lamp Group-Compartment; -Battery Room-Cab-Pump Room-Hydraulic Oil Cooler Room | 2 |
167-0931 Wiring Gp-Enclosure -Lh
| 03***48 | Clip; (11.11mm .437in Id) | 7 |
| 10***55 | Sensor Group-Temperature; -Front Brake Oil-Torque Converter Oil-Transmission Oil-Aftercooler-Axle Oil-Rear Brake Oil | 1 |
| 10***61 | Lamp Group-Compartment; -Battery Room-Cab-Pump Room-Hydraulic Oil Cooler Room | 1 |
123-6895 Wiring Gp-Engine
| 09***52 | Bar | 1 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 14 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
106-4700 Wiring Gp-Engine
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 3 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 19 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 1 |
6i-7635 Wiring Gp-Swing Frame
| 03***48 | Clip; (11.11mm .437in Id) | 2 |
| 10***32 | Control Group-Electronic; (Coolant Temp Sensor) | 1 |
| 10***27 | Suppressor Group-Electronic; -Air Conditioner Compressor | 1 |
167-0929 Wiring Gp-Swing Frame
| 03***48 | Clip; (11.11mm .437in Id) | 2 |
| 10***32 | Control Group-Electronic; (Coolant Temp Sensor) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
Engine Arrangement
167-9573 Engine Ar
| 10***07 | Cooler Group-Engine Oil | 1 |
| 10***31 | Cover Group-Valve Mechanism | 14 |
| 10***38 | Breather Group; -Crankcase | 1 |
100-6339 Engine Ar
| 10***39 | Engine Ar | 1 |
| 10***07 | Cooler Group-Engine Oil | 1 |
| 10***31 | Cover Group-Valve Mechanism | 14 |
Frame And Body
108-2932 Counterweight Gp
| 10***51 | Ring As | 2 |
| 10***32 | Counterweight Group | 1 |
168-3371 Enclosure Gp-Engine
| 13***79 | Tube As | 1 |
| 16***71 | Enclosure Group-Engine | 1 |
| 16***72 | Enclosure As; (Rh)(1) | 1 |
146-9747 Enclosure Gp-Swing Bearing
| 10***50 | Plate | 4 |
| 11***57 | Cover | 2 |
| 11***01 | Cover As | 3 |
6i-7700 Enclosure Gp-Swing Bearing
| 10***50 | Plate | 4 |
| 11***57 | Cover | 2 |
| 11***01 | Cover As | 3 |
6i-7713 Fastener Gp-Counterweight
| 3E***23 | Bolt; (M42x4.5x420mm) | 10 |
| 6I***13 | Fastener Group-Counterweight; -Swing Frame | 1 |
| 7X***40 | Washer; (45x78x8-mm Thk) | 10 |
168-7782 Fastener Gp-Counterweight
| 10***08 | Washer | 6 |
| 16***44 | Block | 2 |
| 16***82 | Fastener Group-Counterweight; -Enclosure, Rh | 1 |
108-2713 Fastener Gp-Frame -Rh
| 10***13 | Fastener Group-Frame; -Rh | 1 |
| 17***92 | Bolt; (M30x3.5x220-mm)(Front Trunnion Support Mtg) | 16 |
| 6I***81 | Washer; (12mm Thk)(Marked Z) | 16 |
108-2712 Fastener Gp-Frame -Lh
| 10***12 | Fastener Group-Frame; -Lh | 1 |
| 6I***81 | Washer; (12mm Thk)(Marked Z) | 40 |
| 8T***70 | Bolt; (M30x3.5x140-mm) | 40 |
6i-7714 Fastener Gp-Handrail
| 10***03 | Chain | 2 |
| 11***02 | Chain | 1 |
| 11***80 | Plate | 20 |
107-7996 Frame Gp-Upper -Swing
| 10***42 | Plate | 2 |
| 10***96 | Frame Group-Upper; -Swing | 1 |
| 11***17 | Bearing | 4 |
6i-7637 Frame Gp-Upper -Lh
| 10***45 | Grate As | 1 |
| 10***49 | Grate As | 2 |
| 10***06 | Grate As | 2 |
6i-7651 Frame Gp-Upper -Rh
| 10***75 | Step As | 1 |
| 10***86 | Grate As | 1 |
| 10***88 | Grate As | 1 |
145-0480 Gear & Bearing Gp-Swing
| 12***08 | Seal | 1 |
| 14***25 | Gear & Bearing Group | 1 |
| 14***80 | Gear & Bearing Group-Swing | 1 |
108-2492 Gear & Bearing Gp-Swing
| 10***92 | Gear & Bearing Group-Swing | 1 |
| 12***08 | Seal | 1 |
| 13***82 | Plate | 10 |
141-8183 Gear & Bearing Gp-Swing
| 11***14 | Seal | 1 |
| 12***33 | Gear & Bearing Group-Swing | 1 |
| 14***16 | Gear & Bearing Group-Swing | 1 |
170-6727 Gear & Bearing Gp-Swing
| 11***83 | Seal (1100 cm) (Order By The Centimeter) | 0 |
| 13***92 | Seal; (657.00cm) | 0 |
| 17***27 | Gear & Bearing Group-Swing | 1 |
6i-7718 Handrail Gp
| 10***40 | Handrail As | 1 |
| 10***41 | Handrail As | 2 |
| 10***42 | Handrail As | 1 |
6i-7638 Hood & Guard Gp -Lh
| 10***87 | Enclosure As; (Lh) | 1 |
| 10***50 | Tread | 4 |
| 10***89 | Plate | 3 |
6i-7652 Hood & Guard Gp -Rh
| 10***02 | Enclosure As; (Rh) | 1 |
| 10***04 | Tube As | 1 |
| 10***15 | Panel As | 1 |
176-5702 Hood & Guard Gp -Rh
| 05***48 | Locknut; (9/16-18-Thd) | 2 |
| 10***15 | Panel As | 1 |
| 10***17 | Panel As, . Housing, Housing | 1 |
110-6087 Ladder Gp
| 09***60 | Setscrew-Socket; (M6x1x6-mm) | 1 |
| 09***54 | Nut | 2 |
| 11***87 | Ladder Group | 1 |
112-9155 Ladder Gp
| 11***55 | Ladder Group | 1 |
| 11***37 | Plate As | 1 |
| 11***38 | Plate As | 2 |
108-4404 Ladder Gp -Cab Access
| 10***04 | Ladder Group; -Cab Access | 1 |
| 14***49 | Ladder As | 1 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 8 |
108-2718 Ladder Gp -Vehicle Access
| 10***18 | Ladder Group; -Vehicle Access | 1 |
| 11***99 | Bearing As | 4 |
| 11***25 | Sheet As | 1 |
7i-5739 Ladder Gp -Rh Front
| 11***00 | Bracket | 1 |
| 11***15 | Ladder As | 1 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 10 |
114-1987 Lifting Gp-Barrel
| 11***87 | Lifting Group-Barrel | 1 |
| 11***88 | Hoist Group | 1 |
| 11***89 | Clamp Group-Barrel | 1 |
115-5524 Lubrication Gp-Automatic -Mass Excavator Boom
| 10***13 | Hose As | 1 |
| 10***16 | Plate | 2 |
| 11***35 | Hose As | 1 |
6i-7630 Lubrication Gp-Automatic -Chassis
| 00***83 | Nipple-Pipe; (Hexagon) | 2 |
| 08***80 | Tube | 8 |
| 10***82 | Hose As | 1 |
128-6035 Lubrication Gp-Automatic -Front Shovel Bucket
| 00***54 | Nipple-Pipe | 2 |
| 00***83 | Nipple-Pipe; (Hexagon) | 1 |
| 10***80 | Hose As | 3 |
115-5530 Lubrication Gp-Automatic -Mass Excavator - Stick
| 00***54 | Nipple-Pipe | 1 |
| 10***15 | Hose As | 2 |
| 10***16 | Plate | 3 |
108-2933 Lubrication Gp-Automatic -Lh Enclosure
| 10***33 | Lubrication Group-Automatic; -Lh Enclosure | 1 |
| 11***19 | Hose As | 1 |
| 11***20 | Hose As | 1 |
108-5785 Lubrication Gp-Automatic -Front Shovel Boom
| 00***83 | Nipple-Pipe; (Hexagon) | 1 |
| 10***82 | Hose As | 2 |
| 10***16 | Plate | 1 |
102-2317 Lubrication Gp-Automatic -Front Shovel-Bucket
| 00***54 | Nipple-Pipe | 2 |
| 00***83 | Nipple-Pipe; (Hexagon) | 1 |
| 10***17 | Lubrication Group-Automatic; -Front Shovel-Bucket | 1 |
145-7929 Lubrication Gp-Automatic -Mass Excavator Stick
| 00***54 | Nipple-Pipe | 2 |
| 00***83 | Nipple-Pipe; (Hexagon) | 1 |
| 10***16 | Plate | 1 |
108-5789 Lubrication Gp-Automatic -Front Shovel Stick
| 00***54 | Nipple-Pipe | 2 |
| 10***16 | Plate | 2 |
| 10***89 | Lubrication Group-Automatic; -Front Shovel Stick | 1 |
6i-7249 Mounting Gp-Cab
| 11***31 | Mount Assem. | 8 |
| 16***01 | Sleeve | 4 |
| 16***02 | Spacer | 8 |
138-2699 Panel Gp-Enclosure
| 10***11 | Plate; (100x50 mm) | 1 |
| 11***12 | Plate; (29x30 mm) | 1 |
| 11***13 | Plate As; (Small) | 11 |
123-6630 Pump Gp-Lubrication
| 12***62 | Drum As-Lubricant | 1 |
| 12***68 | Nut-Wing | 2 |
| 12***14 | Rod | 2 |
123-6628 Pump Gp-Lubrication
| 00***10 | Tee; (Pipe) | 1 |
| 12***83 | Hose As | 1 |
| 12***84 | Seal | 1 |
111-5983 Pump Gp-Lubrication
| 00***10 | Tee; (Pipe) | 1 |
| 03***43 | Screw | 4 |
| 11***83 | Pump Group-Lubrication | 1 |
173-2640 Reel Gp-Hose
| 11***36 | Stop As | 1 |
| 11***37 | Grease Gun Group; (Manual Lubrication) | 1 |
| 11***38 | Swivel Joint As | 1 |
5t-5010 Valve Gp-Lube Distribution -5 Injector
| 19***54 | Packing | 5 |
| 5T***10 | Valve Group-Lube Distribution; -5-Injector | 1 |
| 5T***45 | Injector Group-Grease; (Lube Valve) | 5 |
8w-2597 Valve Gp-Lube Distribution -4-Injector
| 19***54 | Packing | 4 |
| 5T***45 | Injector Group-Grease; (Lube Valve) | 4 |
| 8W***55 | Kit-Injector; (Lube Valve) | 1 |
141-2107 Valve Gp-Lube Distribution -2-Injector
| 14***07 | Valve Group-Lube Distribution; -2-Injector | 1 |
| 19***54 | Packing | 2 |
| 5T***45 | Injector Group-Grease; (Lube Valve) | 2 |
5t-5009 Valve Gp-Lube Distribution -3-Injector
| 19***54 | Packing | 1 |
| 5T***09 | Valve Group-Lube Distribution; -3-Injector-Steering Cyl, Linkage, Rh, Lh-Hoist, Rear Susp Cyl, Rh, Lh-Front Susp, Steer Cyl, Rh, Lh | 1 |
| 5T***45 | Injector Group-Grease; (Lube Valve) | 3 |
6i-7725 Walkway Gp
| 10***27 | Support As | 1 |
| 10***29 | Support As | 1 |
| 11***40 | Grate As | 3 |
Fuel System
125-2556 Adapter Gp-Fast Fill Fuel
| 10***81 | Block | 1 |
| 12***52 | Hose | 1 |
| 12***53 | Tube | 1 |
137-8274 Filter Gp-Fuel
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 5 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 10 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
8n-8291 Filter Gp-Fuel
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 3 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 8 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 2 |
6i-4468 Filter Gp-Primary Fuel
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 3 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 8 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 2 |
116-4083 Heater Gp-Fuel-Coolant
| 06***93 | Bushing-Reducer; (1/2-14 Nptf) | 2 |
| 11***83 | Heater Group-Fuel-Coolant | 1 |
| 11***96 | Plate As | 1 |
158-5076 Injector Gp-Fuel
| 15***76 | Injector Group-Fuel | 1 |
| 8J***25 | Seal-O-Ring | 1 |
| 9X***35 | Seal-O-Ring | 1 |
192-2817 Injector Gp-Fuel
| 19***17 | Injector Group-Fuel | 1 |
| 19***84 | Seal-O-Ring | 1 |
| 9X***35 | Seal-O-Ring | 1 |
7e-8836 Injector Gp-Fuel
| 7E***36 | Injector Group-Fuel | 1 |
| 8J***25 | Seal-O-Ring | 1 |
| 9X***35 | Seal-O-Ring | 1 |
108-2520 Lines Gp-Fuel -Rh Enclosure
| 10***20 | Lines Group-Fuel; -Rh Enclosure | 1 |
| 11***39 | Bracket | 2 |
| 11***53 | Hose As | 1 |
108-2505 Lines Gp-Fuel -Chassis
| 10***05 | Lines Group-Fuel; -Chassis | 1 |
| 11***03 | Hose As | 1 |
| 11***05 | Hose As | 1 |
6i-7643 Lines Gp-Fuel -Lh Enclosure
| 11***21 | Hose As | 1 |
| 11***22 | Hose As | 1 |
| 12***48 | Valve-Drain; (Fuel Tank) | 1 |
111-4345 Lines Gp-Fuel Injection
| 03***48 | Elbow (3/4" Tapped Pumps) - 2nd Type | 1 |
| 03***49 | Elbow; (90 Degree, 37 Degree Flared) | 4 |
| 03***82 | Union-Flared | 1 |
156-9755 Manifold Gp-Fuel -Rh
| 10***37 | Grommet | 16 |
| 14***45 | Washer-Retaining | 8 |
| 15***48 | Clamp | 8 |
156-9756 Manifold Gp-Fuel -Lh
| 10***37 | Grommet | 16 |
| 14***45 | Washer-Retaining | 8 |
| 15***48 | Clamp | 8 |
7e-9090 Pump Gp-Fuel Injection
| 19***17 | Injector Group-Fuel | 1 |
| 7C***15 | Plug | 1 |
| 7E***80 | Clamp-Injector | 1 |
8n-7763 Pump Gp-Fuel Priming
| 1B***90 | Bolt; (5/16-18x1.375-In)(Rh Front Cover) | 1 |
| 1H***71 | Seal 20.22 mm(.796 In.)I. D. | 1 |
| 2W***05 | Pump As-Fuel Priming | 1 |
165-9154 Pump Gp-Fuel Priming
| 16***54 | Pump Group-Fuel Priming; -Manual | 1 |
| 18***23 | Pump As-Fuel Priming | 1 |
| 7X***01 | Bolt-Plt; (1/4unc X 1 1/4) | 1 |
8n-6151 Pump Gp-Fuel Transfer
| 16***15 | Pump Group-Fuel Transfer | 1 |
| 1H***96 | Packing,Preformed Cartridge Part Of Kit P/N 4j***80 | 1 |
| 1N***36 | Coupling-Drive | 1 |
169-8615 Pump Gp-Fuel Transfer
| 11***97 | Seal-Lip; (Inner) | 1 |
| 12***37 | Shaft As-Drive | 1 |
| 16***15 | Pump Group-Fuel Transfer | 1 |
1n-4478 Pump Gp-Fuel Transfer
| 11***96 | Seal-Lip; (Outer) | 1 |
| 11***97 | Seal-Lip; (Inner) | 1 |
| 12***37 | Shaft As-Drive | 1 |
6i-7647 Tank & Mtg Gp-Fuel
| 11***08 | Tank Group-Fuel | 1 |
| 6I***83 | Spacer; (25.45x44.45x95-mm Thk)(95.0mm) | 9 |
| 6I***47 | Tank & Mtg Group-Fuel | 1 |
110-6708 Tank Gp-Fuel
| 10***09 | Cap As-Filler; (Fast Fill Fuel) | 1 |
| 11***08 | Tank Group-Fuel | 1 |
| 11***33 | Sensor Group-Fuel Level | 1 |
2g-9000 Valve As-Tank -Fast Fill Fuel
| 2G***00 | Valve As-Tank | 1 |
Hydraulic System
4i-5690 Accumulator Gp-Hydraulic
| 4I***39 | Core | 1 |
| 4I***90 | Accumulator Group-Hydraulic; -Pilot Lines | 1 |
| 4I***62 | Cap | 1 |
7y-8421 Accumulator Gp-Hydraulic -Pilot
| 4I***90 | Accumulator Group-Hydraulic; -Pilot Lines | 1 |
| 4I***56 | Accumulator Group-Hydraulic; -Pilot Lines | 1 |
| 7Y***21 | Accumulator Group-Hydraulic; -Pilot Lines | 1 |
4i-5756 Accumulator Gp-Hydraulic -Pilot
| 08***75 | Core | 1 |
| 08***76 | Cap | 1 |
| 08***77 | Seal | 1 |
4i-5968 Actuator Gp-Piston Pump
| 10***92 | Support | 1 |
| 4I***68 | Actuator Group-Piston Pump; -Implement | 1 |
| 4I***96 | Bushing | 1 |
158-9102 Actuator Gp-Piston Pump
| 15***02 | Actuator Group-Piston Pump; -Implement | 1 |
| 16***67 | Roller | 1 |
| 16***87 | Piston | 1 |
4i-7693 Actuator Gp-Piston Pump -Maximum Angle
| 4I***93 | Actuator Group-Piston Pump; -Implement-Maximum Angle | 1 |
| 4I***11 | Piston | 1 |
| 6E***67 | Rod-Actuator | 1 |
190-3099 Actuator Gp-Piston Pump
| 16***02 | Rod; (152.2-mm, Oal) | 1 |
| 19***99 | Actuator Group-Piston Pump; (Minimum Angle) | 1 |
| 19***17 | Piston | 1 |
6e-1026 Actuator Gp-Piston Pump -Minimum Angle
| 14***21 | Rod; (184.7mm Lg) | 1 |
| 14***22 | Rod; (184.9mm Lg) | 1 |
| 14***23 | Rod; (184.6mm Lg) | 1 |
158-9103 Actuator Gp-Pump -Maximum Angle
| 15***03 | Actuator Group-Pump; -Maximum Angle | 1 |
| 16***95 | Piston | 1 |
| 16***96 | Rod; (159.2-mm, Oal) | 1 |
188-7048 Actuator Gp-Pump
| 16***67 | Roller | 1 |
| 18***04 | Piston | 1 |
| 18***05 | Bushing | 1 |
158-9104 Actuator Gp-Pump -Minimum Angle
| 15***04 | Actuator Group-Pump; -Minimum Angle | 1 |
| 16***01 | Piston | 1 |
| 16***02 | Rod; (152.2-mm, Oal) | 1 |
140-0988 Baffle Gp-Hydraulic Tank
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 13***31 | Spring | 4 |
| 13***39 | Tube As | 4 |
110-6198 Brake Gp-Swing
| 09***13 | Ring | 1 |
| 10***43 | Plug | 1 |
| 10***00 | Seal-O-Ring | 1 |
108-2508 Cooler & Mtg Gp-Hydraulic Oil
| 10***08 | Cooler & Mtg Group-Hydraulic Oil | 1 |
| 10***39 | Plate As | 8 |
| 12***37 | Cooler Group-Hydraulic Oil | 2 |
120-6381 Cooler Gp-Hydraulic Oil
| 11***17 | Core As-Oil Cooler | 1 |
| 11***18 | Support As | 1 |
| 11***19 | Shroud As | 1 |
124-2937 Cooler Gp-Hydraulic Oil
| 09***49 | Bolt; (M8x1.25x40-mm) | 2 |
| 11***18 | Support As | 1 |
| 12***37 | Cooler Group-Hydraulic Oil | 1 |
4i-7695 Cover Gp-Pump
| 2H***35 | Seal (5.382" Inside Diameter) | 1 |
| 4I***95 | Cover Group-Pump; -Implement | 1 |
| 4I***12 | Flange | 1 |
115-5518 Cover Gp-Valve -Main Control Valve
| 11***18 | Cover Group-Valve; -Main Control Valve | 1 |
| 1P***05 | Seal (Check Valve Outlet) | 2 |
| 5P***49 | Cover | 2 |
108-5772 Cylinder & Mtg Gp-Bucket -Front Shovel Bottom Dump
| 10***03 | Cover | 2 |
| 10***04 | Pin | 2 |
| 10***28 | Pin | 2 |
113-1923 Cylinder Gp-Boom -Mass Excavator
| 10***72 | Bolt; (M36x4x120-mm) | 8 |
| 10***67 | Bolt; (M36x4x150-mm) | 8 |
| 10***49 | Bearing | 2 |
115-5522 Cylinder Gp-Boom -Mass Excavator
| 10***97 | Cover | 4 |
| 11***38 | Pin | 2 |
| 11***23 | Cylinder Group-Boom; -Mass Excavator | 2 |
121-8909 Cylinder Gp-Boom -Front Shovel
| 10***72 | Bolt; (M36x4x120-mm) | 8 |
| 10***67 | Bolt; (M36x4x150-mm) | 8 |
| 10***49 | Bearing | 2 |
108-2137 Cylinder Gp-Boom -Front Shovel
| 10***72 | Bolt; (M36x4x120-mm) | 8 |
| 10***55 | Bearing-Aligning | 1 |
| 10***67 | Bolt; (M36x4x150-mm) | 8 |
116-0437 Cylinder Gp-Bucket -Mass Excavator Rh
| 10***96 | Ring-Retaining | 2 |
| 10***50 | Bearing-Aligning; (180.0mm Id) | 1 |
| 10***22 | Bearing | 2 |
116-0439 Cylinder Gp-Bucket -Mass Excavator Lh
| 10***96 | Ring-Retaining | 2 |
| 10***50 | Bearing-Aligning; (180.0mm Id) | 1 |
| 10***22 | Bearing | 2 |
127-0867 Cylinder Gp-Bucket -Front Shovel
| 10***22 | Bearing | 2 |
| 10***23 | Head | 1 |
| 10***67 | Bolt; (M36x4x150-mm) | 6 |
108-2136 Cylinder Gp-Bucket -Front Shovel
| 10***22 | Bearing | 4 |
| 10***23 | Head | 1 |
| 10***67 | Bolt; (M36x4x150-mm) | 6 |
6e-6435 Cylinder Gp-Bucket -Front Shovel Bottom Dump
| 11***36 | Head | 1 |
| 11***45 | Washer | 1 |
| 12***25 | Rod As | 1 |
130-5986 Cylinder Gp-Bucket -Front Shovel Bottom Dump
| 13***86 | Cylinder Group-Bucket; -Front Shovel Bottom Dump | 1 |
| 13***87 | Cylinder As | 1 |
| 13***88 | Rod As | 1 |
115-5528 Cylinder Gp-Bucket -Mass Excavator
| 11***28 | Cylinder Group-Bucket; -Mass Excavator | 1 |
| 11***37 | Cylinder Group-Bucket; -Mass Excavator Rh | 1 |
| 11***39 | Cylinder Group-Bucket; -Mass Excavator Lh | 1 |
113-1924 Cylinder Gp-Stick -Mass Excavator
| 10***67 | Bolt; (M36x4x150-mm) | 2 |
| 10***32 | Bearing | 4 |
| 10***35 | Head | 1 |
108-2135 Cylinder Gp-Stick -Front Shovel
| 10***22 | Bearing | 4 |
| 10***23 | Head | 1 |
| 10***67 | Bolt; (M36x4x150-mm) | 6 |
127-0865 Cylinder Gp-Stick -Front Shovel
| 09***08 | Pin-Tapered | 1 |
| 10***22 | Bearing | 2 |
| 10***23 | Head | 1 |
127-1475 Cylinder Gp-Track Tension
| 12***29 | Seal-U-Cup | 1 |
| 12***75 | Cylinder Group-Track Tension | 1 |
| 12***79 | Cylinder As | 1 |
6e-6306 Cylinder Gp-Track Tension
| 5P***47 | Washer (Bracket To Valve Support) | 12 |
| 6E***06 | Cylinder Group-Track Tension | 1 |
| 6E***07 | Cylinder As | 1 |
108-2509 Drive Gp-Pump
| 10***09 | Drive Group-Pump | 1 |
| 13***77 | Drive Group-Pump | 1 |
| 2D***02 | Plate | 1 |
135-9477 Drive Gp-Pump
| 06***58 | Ball Bearing | 8 |
| 10***60 | Ring-Retaining | 1 |
| 10***03 | Seal-O-Ring | 1 |
120-9708 Drive Gp-Pump
| 06***58 | Ball Bearing | 8 |
| 10***60 | Ring-Retaining | 1 |
| 10***03 | Seal-O-Ring | 1 |
6i-7233 Drive Gp-Swing
| 09***28 | Ring-Retaining; (External) | 5 |
| 09***42 | Ring-Retaining | 3 |
| 10***65 | Ring-Support | 1 |
134-2493 Drive Gp-Swing
| 09***28 | Ring-Retaining; (External) | 5 |
| 10***22 | Bearing As-Roller | 10 |
| 10***47 | Bearing-Roller | 1 |
134-3675 Drive Gp-Swing
| 09***50 | Ring-Retaining | 4 |
| 10***47 | Bearing-Roller | 1 |
| 10***20 | Seal | 2 |
111-6219 Fastener Gp-Implement Valve -Front
| 11***19 | Fastener Group-Implement Valve; -Front | 1 |
| 8T***82 | Bolt; (M16x2x260-mm) | 4 |
| 9X***57 | Washer-Pipe As To Main Pump Suction Port | 4 |
6i-7717 Fastener Gp-Swing Drive & Mtr
| 10***04 | Bolt; (M24x3x420-mm) | 72 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 3 |
| 6I***17 | Fastener Group-Swing Drive & Mtr | 1 |
144-6421 Fastener Gp-Swing Drive & Mtr
| 12***38 | Bolt; (M24x3x500-mm) | 72 |
| 14***21 | Fastener Group-Swing Drive & Mtr | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 3 |
108-2714 Fastener Gp-Swivel
| 10***14 | Fastener Group-Swivel | 1 |
| 10***45 | Plate As | 1 |
| 15***20 | Flange | 4 |
152-1844 Filter & Mtg Gp-Oil -Hydraulic High Pressure
| 14***28 | Plate | 4 |
| 15***44 | Filter & Mtg Group-Oil; -Hydraulic High Pressure | 1 |
| 17***95 | Screen Group-Hydraulic; -Tandem-Implement High Pressure | 4 |
108-2686 Filter & Mtg Gp-Oil -Hydraulic High Pressure
| 10***86 | Filter & Mtg Group-Oil; -Hydraulic High Pressure | 1 |
| 11***43 | Screen Group-Hydraulic; -Hydraulic High Pressure | 4 |
| 8T***23 | Washer-Plated; (22x35x3.5-mm Thk) | 8 |
7y-4075 Filter Gp-Oil -Pilot
| 10***36 | Seal-O-Ring; (49.28mm Id) | 1 |
| 12***14 | Filter-Oil; (Ultra High Efficiency) | 1 |
| 4I***50 | Filter-Oil; (Advanced Efficiency)(Hydraulic)(Disposable) | 1 |
105-5022 Head Gp-Pump -Implement, Swing
| 08***72 | Plug-O-Ring | 1 |
| 10***22 | Head Group-Pump; -Implement - Swing | 1 |
| 10***30 | Head-Lh | 1 |
190-3089 Head Gp-Pump -Implement, Swing
| 08***72 | Plug-O-Ring | 2 |
| 12***94 | Plug; (Break Off) | 12 |
| 16***67 | Valve | 1 |
108-2514 Hydraulic Ar
| 10***93 | Pump & Mtg Group-Implement | 1 |
| 10***14 | Hydraulic Ar | 1 |
| 10***86 | Filter & Mtg Group-Oil; -Hydraulic High Pressure | 1 |
152-1845 Hydraulic Ar
| 10***90 | Lines Group-Pump; -Pump Drive Lubrication | 1 |
| 12***32 | Lines Group-Hydraulic Fan; -Radiator | 1 |
| 15***44 | Filter & Mtg Group-Oil; -Hydraulic High Pressure | 1 |
115-5517 Lines Gp-Boom -Mass Excavator
| 10***72 | Clamp | 12 |
| 10***73 | Plate | 6 |
| 10***27 | Spacer; (65-mm Thk) | 6 |
115-5523 Lines Gp-Boom Cylinder -Mass Excavator
| 10***72 | Clamp | 8 |
| 10***73 | Plate | 4 |
| 11***15 | Clamp As | 2 |
108-2506 Lines Gp-Boom Cylinder -Chassis
| 10***73 | Plate | 3 |
| 10***06 | Lines Group-Boom Cylinder; -Chassis | 1 |
| 11***69 | Hose As | 1 |
6i-7609 Lines Gp-Boom Cylinder -Front Shovel
| 10***72 | Clamp | 8 |
| 10***73 | Plate | 4 |
| 11***19 | Hose As | 2 |
112-9160 Lines Gp-Boom Cylinder -Front Shovel
| 11***15 | Clamp As | 2 |
| 11***16 | Clamp | 2 |
| 11***20 | Tube As | 2 |
128-6034 Lines Gp-Bucket Cylinder -Front Shovel-Bottom Dump
| 10***55 | Bolt; (M16x2x240-mm) | 4 |
| 11***97 | Block-Manifold | 1 |
| 12***34 | Lines Group-Bucket Cylinder; -Front Shovel-Bottom Dump | 1 |
6i-7611 Lines Gp-Bucket Cylinder -Front Shovel-Bottom Dump
| 11***96 | Tube As | 2 |
| 1P***05 | Seal (Check Valve Outlet) | 8 |
| 1U***48 | Plate | 2 |
108-5779 Lines Gp-Bucket Cylinder -Front Shovel
| 10***79 | Lines Group-Bucket Cylinder; -Front Shovel | 1 |
| 11***02 | Tube As | 1 |
| 11***03 | Tube As | 1 |
108-5786 Lines Gp-Bucket Cylinder -Front Shovel
| 10***27 | Spacer; (65-mm Thk) | 6 |
| 10***86 | Lines Group-Bucket Cylinder; -Front Shovel | 1 |
| 10***60 | Plate | 1 |
108-5787 Lines Gp-Bucket Cylinder -Front Shovel-Bottom Dump
| 10***87 | Lines Group-Bucket Cylinder; -Front Shovel-Bottom Dump | 1 |
| 11***90 | Tube As | 2 |
| 11***91 | Plate As | 1 |
115-5529 Lines Gp-Bucket Cylinder -Mass Excavator
| 11***90 | Clamp As | 4 |
| 11***91 | Clamp | 4 |
| 11***29 | Lines Group-Bucket Cylinder; -Mass Excavator | 1 |
6i-7615 Lines Gp-Bucket Cylinder -Front Shovel
| 14***87 | Tube As | 1 |
| 14***88 | Tube As | 1 |
| 1P***05 | Seal (Check Valve Outlet) | 4 |
108-5773 Lines Gp-Bucket Cylinder -Front Shovel-Bottom Dump
| 10***55 | Bolt; (M16x2x240-mm) | 4 |
| 10***73 | Lines Group-Bucket Cylinder; -Front Shovel-Bottom Dump | 1 |
| 11***97 | Block-Manifold | 1 |
167-0947 Lines Gp-Cylinder -Mass Excavator-Bucket Cylinder-Stick Cylinder
| 10***72 | Clamp | 12 |
| 10***73 | Plate | 6 |
| 10***27 | Spacer; (65-mm Thk) | 6 |
108-2502 Lines Gp-Front -Chassis
| 10***02 | Lines Group-Front; -Chassis | 1 |
| 10***62 | Plate | 1 |
| 10***63 | Plate As | 1 |
126-8159 Lines Gp-Front -Mass Excavation
| 10***62 | Plate | 2 |
| 10***63 | Plate As | 2 |
| 10***34 | Spacer; (9.28x12.58x76-mm Thk)(76.0mm Thk) | 22 |
126-8158 Lines Gp-Front -Front Shovel
| 10***62 | Plate | 2 |
| 10***63 | Plate As | 2 |
| 10***34 | Spacer; (9.28x12.58x76-mm Thk)(76.0mm Thk) | 22 |
160-7989 Lines Gp-Front -Mass Excavator
| 10***62 | Plate | 3 |
| 10***63 | Plate As | 3 |
| 10***34 | Spacer; (9.28x12.58x76-mm Thk)(76.0mm Thk) | 33 |
167-1061 Lines Gp-Front -Front Shovel
| 10***62 | Plate | 2 |
| 10***63 | Plate As | 2 |
| 10***34 | Spacer; (9.28x12.58x76-mm Thk)(76.0mm Thk) | 22 |
6i-7644 Lines Gp-Hydraulic Fan -Oil Cooler
| 10***45 | Valve Group-Makeup; -Fan Motor | 1 |
| 11***38 | Block | 1 |
| 11***61 | Hose As | 1 |
7i-5953 Lines Gp-Hydraulic Fan -Radiator
| 10***45 | Valve Group-Makeup; -Fan Motor | 1 |
| 11***28 | Hose As | 1 |
| 11***29 | Hose As | 1 |
121-0932 Lines Gp-Hydraulic Fan -Radiator
| 10***45 | Valve Group-Makeup; -Fan Motor | 1 |
| 11***30 | Hose As | 1 |
| 11***31 | Hose As | 1 |
6i-7729 Lines Gp-Hydraulic Fan -Oil Cooler
| 11***87 | Tube As | 1 |
| 11***92 | Tube As | 1 |
| 4E***41 | Spacer; (14.23x19.05x40-mm Thk) | 1 |
7i-5942 Lines Gp-Hydraulic Fan -Oil Cooler
| 12***32 | Hose As | 1 |
| 4J***22 | Seal-Interface Between 3rd & Tilt Valve | 2 |
| 5P***70 | Clip (Slot - Large) | 2 |
6i-7625 Lines Gp-Hydraulic Oil Cooler
| 10***73 | Plate | 2 |
| 11***79 | Hose As | 1 |
| 11***80 | Hose As | 1 |
152-1839 Lines Gp-Hydraulic Oil Cooler
| 10***73 | Plate | 2 |
| 11***83 | Tube As | 1 |
| 11***84 | Tube As | 1 |
6i-7645 Lines Gp-Hydraulic Oil Cooler -Lh
| 11***84 | Tube As | 1 |
| 11***85 | Tube As | 1 |
| 11***86 | Tube As | 1 |
7i-5943 Lines Gp-Pilot -Rh Enclosure
| 10***02 | Hose As | 1 |
| 10***37 | Hose As | 2 |
| 10***57 | Hose As | 1 |
152-1833 Lines Gp-Pilot -Chassis
| 10***94 | Spacer; (12.58x15.88x102-mm Thk) | 9 |
| 11***88 | Clamp | 12 |
| 11***89 | Plate | 4 |
6i-7730 Lines Gp-Pilot -Chassis
| 06***92 | Tag-Identification; (Number One) | 2 |
| 10***20 | Hose As | 1 |
| 10***21 | Hose As | 2 |
152-1852 Lines Gp-Pilot -Rh Enclosure
| 11***77 | Hose As | 1 |
| 11***64 | Hose As | 1 |
| 11***84 | Hose As | 1 |
7i-5945 Lines Gp-Pump -Rh Enclosure
| 10***47 | Hose | 4 |
| 10***55 | Block | 1 |
| 10***64 | Tee | 2 |
6i-7626 Lines Gp-Pump -Chassis
| 10***72 | Clamp | 12 |
| 10***73 | Plate | 8 |
| 10***25 | Clip; (Slot) | 1 |
152-1834 Lines Gp-Pump -Chassis
| 10***72 | Clamp | 12 |
| 10***73 | Plate | 8 |
| 10***25 | Clip; (Slot) | 1 |
152-1848 Lines Gp-Pump -Rh Enclosure
| 10***64 | Tee | 2 |
| 11***49 | Bracket As | 1 |
| 11***50 | Clamp | 2 |
108-2690 Lines Gp-Pump -Pump Drive Lubrication
| 10***90 | Lines Group-Pump; -Pump Drive Lubrication | 1 |
| 11***34 | Hose As | 1 |
| 11***35 | Hose As | 1 |
152-1849 Lines Gp-Return -Rh Enclosure
| 10***35 | Block-Manifold; (Case Drain Oil) | 1 |
| 11***37 | Hose As | 1 |
| 11***38 | Hose As | 1 |
6i-7627 Lines Gp-Return -Chassis
| 10***73 | Plate | 2 |
| 11***01 | Tube As | 1 |
| 11***04 | Plate; (Small) | 2 |
7i-5950 Lines Gp-Return -Rh Enclosure
| 11***64 | Block-Manifold | 1 |
| 11***75 | Hose As | 1 |
| 11***76 | Hose As | 1 |
152-1835 Lines Gp-Return -Chassis
| 10***73 | Plate | 5 |
| 11***04 | Plate; (Small) | 1 |
| 11***08 | Hose As; (19.1-mm Id) | 2 |
115-5527 Lines Gp-Stick -Mass Excavator
| 10***25 | Clip; (Slot) | 2 |
| 10***26 | Clip; (Tab) | 2 |
| 10***28 | Clamp As | 2 |
167-0946 Lines Gp-Stick Cylinder -Mass Excavator
| 10***25 | Clip; (Slot) | 2 |
| 10***26 | Clip; (Tab) | 2 |
| 10***28 | Clamp As | 2 |
187-3620 Lines Gp-Stick Cylinder -Front Shovel
| 10***72 | Clamp | 8 |
| 10***73 | Plate | 4 |
| 12***20 | Bolt-12 Point Head; (M20x2.5x70-mm) | 8 |
6i-7610 Lines Gp-Stick Cylinder -Front Shovel Boom
| 10***72 | Clamp | 8 |
| 10***73 | Plate | 4 |
| 11***28 | Hose As | 1 |
112-9168 Lines Gp-Stick Cylinder -Front Shovel
| 11***42 | Tube As | 1 |
| 11***43 | Tube As | 1 |
| 11***68 | Lines Group-Stick Cylinder; -Front Shovel | 1 |
146-4228 Lines Gp-Swing Drive
| 14***23 | Hose As | 1 |
| 14***13 | Hose As | 1 |
| 14***28 | Lines Group-Swing Drive | 1 |
6i-7628 Lines Gp-Swing Motor
| 15***20 | Flange | 2 |
| 16***60 | Hose As | 1 |
| 16***63 | Hose As | 1 |
108-2727 Lines Gp-Track Tension -Rh
| 10***39 | Valve Group-Manifold & Relief; -Track Tension | 1 |
| 10***27 | Lines Group-Track Tension; -Rh | 1 |
| 11***01 | Hose As | 1 |
108-2723 Lines Gp-Track Tension -Lh
| 10***39 | Valve Group-Manifold & Relief; -Track Tension | 1 |
| 10***23 | Lines Group-Track Tension; -Lh | 1 |
| 11***01 | Hose As | 1 |
108-2494 Lines Gp-Track Tension -Carbody
| 10***94 | Lines Group-Track Tension; -Carbody | 1 |
| 11***32 | Hose As | 2 |
6i-7539 Lines Gp-Travel Motor -Carbody
| 11***52 | Hose As | 1 |
| 11***37 | Plate | 2 |
| 11***78 | Hose As | 1 |
112-4156 Lines Gp-Travel Motor -Lh
| 11***56 | Lines Group-Travel Motor; -Lh | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 2 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
152-1837 Lines Gp-Travel Motor -Chassis
| 10***72 | Clamp | 8 |
| 10***73 | Plate | 8 |
| 15***37 | Lines Group-Travel Motor; -Chassis | 1 |
6i-7629 Lines Gp-Travel Motor -Chassis
| 11***40 | Hose As | 1 |
| 11***41 | Hose As | 1 |
| 11***57 | Clamp-Double | 4 |
112-4157 Lines Gp-Travel Motor -Rh
| 11***57 | Lines Group-Travel Motor; -Rh | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 2 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
139-0516 Manifold Gp-Control -Rad, Hyd Cooling Fan Pump
| 09***49 | Bolt; (M8x1.25x40-mm) | 4 |
| 10***38 | Valve Group-Solenoid | 1 |
| 12***72 | Valve Group-Solenoid | 2 |
148-0281 Manifold Gp-Control -Rad, Hyd Cooling Fan Pump
| 10***38 | Valve Group-Solenoid | 1 |
| 12***72 | Valve Group-Solenoid | 2 |
| 14***78 | Manifold-Block | 1 |
127-7360 Manifold Gp-Pilot
| 12***17 | Valve Group-Relief; -Pilot Lines Low Pressure | 1 |
| 12***59 | Valve Group-Relief; -Pilot High Pressure | 1 |
| 12***60 | Manifold Group-Pilot | 1 |
6e-6019 Manifold Gp-Pilot
| 11***93 | Valve Group-Relief; -High Pressure | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 4 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
134-5501 Manifold Gp-Pilot
| 12***17 | Valve Group-Relief; -Pilot Lines Low Pressure | 1 |
| 12***59 | Valve Group-Relief; -Pilot High Pressure | 1 |
| 13***01 | Manifold Group-Pilot | 1 |
136-5080 Manifold Gp-Pilot
| 10***15 | Valve Group-Solenoid | 5 |
| 12***17 | Valve Group-Relief; -Pilot Lines Low Pressure | 1 |
| 12***59 | Valve Group-Relief; -Pilot High Pressure | 1 |
141-4641 Manifold Gp-Pilot
| 12***17 | Valve Group-Relief; -Pilot Lines Low Pressure | 1 |
| 12***59 | Valve Group-Relief; -Pilot High Pressure | 1 |
| 14***41 | Manifold Group-Pilot | 1 |
6e-6022 Manifold Gp-Resolver
| 17***74 | Switch As-Pressure; (Travel Pressure)(Rear Side)) | 1 |
| 17***83 | Switch As-Pressure; (Implement Pressure) | 2 |
| 3E***65 | Wedge; (Receptacle Lock) (2 Pin) | 1 |
6i-7260 Motor & Mtg Gp-Hydraulic Fan -Hydraulic Oil Cooling
| 15***59 | Motor Group-Piston; -Hydraulic Oil Cooling-Radiator | 1 |
| 6I***60 | Motor & Mtg Group-Hydraulic Fan; -Hydraulic Oil Cooling | 1 |
| 7X***63 | Bolt-Plt; (M20 X 2.5 X 60) | 2 |
7i-5946 Motor & Mtg Gp-Hydraulic Fan -Radiator
| 6E***88 | Motor Group-Piston; -Radiator | 1 |
| 7I***46 | Motor & Mtg Group-Hydraulic Fan; -Radiator | 1 |
| 8T***23 | Washer-Plated; (22x35x3.5-mm Thk) | 4 |
6e-6049 Motor Gp-Fan -Hydraulic Oil Cooling
| 10***26 | Head | 1 |
| 10***27 | Housing | 1 |
| 6E***49 | Motor Group-Fan; (Radiator/Hydraulic Oil Cooling) | 1 |
6e-6588 Motor Gp-Piston -Radiator
| 11***57 | Head-Pump | 1 |
| 11***62 | Rotating Group-Motor; -Radiator Fan | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
159-7159 Motor Gp-Piston -Hydraulic Oil Cooling
| 10***26 | Head | 1 |
| 10***27 | Housing | 1 |
| 15***59 | Motor Group-Piston; -Hydraulic Oil Cooling-Radiator | 1 |
160-0198 Motor Gp-Swing
| 10***57 | Head | 1 |
| 11***03 | Bolt-Socket Head; (M16x2x40-mm) | 6 |
| 16***98 | Motor Group-Swing; -Right Rear, Front | 1 |
122-8068 Motor Gp-Swing
| 10***57 | Head | 1 |
| 12***68 | Motor Group-Swing | 1 |
| 12***02 | Rotating Group-Motor; -Swing | 1 |
108-3028 Motor Gp-Travel -Track Motor
| 10***28 | Motor Group-Travel; -Track Motor | 1 |
| 11***58 | Head-Pump | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
7i-5954 Pump & Mtg Gp-Cooler Fan Drive -Radiator Fan Drive
| 5F***06 | Packing,Preformed Pump Mtg Part Of Kit P/N 5r***25 | 1 |
| 6E***62 | Pump Group-Piston; -Radiator Cooling | 1 |
| 6V***88 | Nut-Full (1/2-13 Thd); (1/2-13-Thd)(Full) | 4 |
7i-5947 Pump & Mtg Gp-Cooler Fan Drive -Hydraulic Oil Cooling Fan
| 5F***06 | Packing,Preformed Pump Mtg Part Of Kit P/N 5r***25 | 1 |
| 6E***63 | Pump Group-Piston; -Hydraulic Oil Cooling | 1 |
| 6V***88 | Nut-Full (1/2-13 Thd); (1/2-13-Thd)(Full) | 4 |
6i-7196 Pump & Mtg Gp-Hydraulic -Pump Drive Lubrication
| 10***59 | Pump Group-Gear; -Pump Drive Lubrication | 1 |
| 5F***06 | Packing,Preformed Pump Mtg Part Of Kit P/N 5r***25 | 1 |
| 6I***96 | Pump & Mtg Group-Hydraulic; -Pump Drive Lubrication | 1 |
108-2493 Pump & Mtg Gp-Implement
| 10***93 | Pump & Mtg Group-Implement | 1 |
| 13***15 | Pump Group-Piston; -Implement | 3 |
| 1M***48 | Seal-- Oil Elbow | 3 |
152-1850 Pump & Mtg Gp-Implement
| 14***77 | Pump Group-Piston; -Implement | 3 |
| 15***50 | Pump & Mtg Group-Implement | 1 |
| 1M***48 | Seal-- Oil Elbow | 3 |
7i-5949 Pump & Mtg Gp-Pilot -Pilot
| 14***70 | Pump Group-Gear; -Pilot, Air Conditioner | 1 |
| 7I***49 | Pump & Mtg Group-Pilot; -Pilot | 1 |
| 8C***89 | Seal (Rear Pump To Center Pump) | 1 |
152-1851 Pump & Mtg Gp-Swing
| 15***51 | Pump & Mtg Group-Swing | 1 |
| 16***65 | Pump Group-Piston; -Swing | 1 |
| 1M***48 | Seal-- Oil Elbow | 1 |
108-2693 Pump & Mtg Gp-Swing
| 10***93 | Pump & Mtg Group-Swing | 1 |
| 1M***48 | Seal-- Oil Elbow | 1 |
| 6E***90 | Pump Group-Piston; -Swing | 1 |
9t-0436 Pump Gp-Gear -Pilot
| 5P***13 | Washer-Between Welded Nut & Top Swivel | 4 |
| 8S***89 | Bolt 4.50 In. (114.30 mm) Long | 4 |
| 9T***36 | Pump Group-Gear; -Pump Drive Lubrication | 1 |
9t-1619 Pump Gp-Gear -Pilot
| 05***26 | Plug | 1 |
| 13***56 | Plate-Pressure | 2 |
| 13***69 | Dowel | 8 |
148-8570 Pump Gp-Gear -Pilot
| 03***53 | Seal-O-Ring; (08.92mm Id) | 1 |
| 13***56 | Plate-Pressure | 4 |
| 13***69 | Dowel | 16 |
100-3559 Pump Gp-Gear -Pump Drive Lubrication
| 00***14 | Ring-Retaining; (Internal) | 1 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 8 |
| 10***59 | Pump Group-Gear; -Pump Drive Lubrication | 1 |
6e-6563 Pump Gp-Piston -Hydraulic Oil Cooling
| 00***69 | Cup-Roller Bearing | 1 |
| 00***71 | Cone-Bearing | 1 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
106-4308 Pump Gp-Piston -Implement
| 09***21 | Washer, Spring | 4 |
| 10***17 | Pump Group-Piston; -Implement | 1 |
| 10***20 | Pump Group-Piston; -Implement | 1 |
190-3083 Pump Gp-Piston -Swing
| 09***58 | Ring-Retaining | 2 |
| 10***86 | Bolt; (M4x.7x12mm)(M4x0.7x12mm) | 4 |
| 11***16 | Pin | 4 |
117-5959 Pump Gp-Piston -Swing
| 09***58 | Ring-Retaining | 2 |
| 10***21 | Rotating Group-Pump; -Implement, Swing | 1 |
| 10***22 | Head Group-Pump; -Implement - Swing | 1 |
160-0165 Pump Gp-Piston -Swing
| 16***65 | Pump Group-Piston; -Swing | 1 |
| 19***83 | Pump Group-Piston; -Swing | 1 |
| 19***84 | Pump Group-Piston; -Swing | 1 |
190-3081 Pump Gp-Piston -Implement
| 09***58 | Ring-Retaining | 2 |
| 10***86 | Bolt; (M4x.7x12mm)(M4x0.7x12mm) | 4 |
| 11***16 | Pin | 4 |
133-3556 Pump Gp-Piston -Implement
| 09***58 | Ring-Retaining | 2 |
| 10***01 | Valve Group-Shuttle; -Resolver-Implement Pump | 1 |
| 10***22 | Head Group-Pump; -Implement - Swing | 1 |
133-3559 Pump Gp-Piston -Swing
| 09***58 | Ring-Retaining | 2 |
| 10***21 | Rotating Group-Pump; -Implement, Swing | 1 |
| 10***22 | Head Group-Pump; -Implement - Swing | 1 |
138-4818 Pump Gp-Piston -Swing
| 09***21 | Washer, Spring | 4 |
| 13***18 | Pump Group-Piston; -Swing | 1 |
| 13***19 | Pump Group-Piston; -Swing | 1 |
133-3555 Pump Gp-Piston -Implement
| 09***58 | Ring-Retaining | 1 |
| 10***01 | Valve Group-Shuttle; -Resolver-Implement Pump | 1 |
| 10***21 | Rotating Group-Pump; -Implement, Swing | 1 |
105-5017 Pump Gp-Piston -Implement
| 09***58 | Ring-Retaining | 2 |
| 10***17 | Pump Group-Piston; -Implement | 1 |
| 10***22 | Head Group-Pump; -Implement - Swing | 1 |
105-5020 Pump Gp-Piston -Implement
| 09***58 | Ring-Retaining | 2 |
| 10***20 | Pump Group-Piston; -Implement | 1 |
| 10***21 | Rotating Group-Pump; -Implement, Swing | 1 |
138-4819 Pump Gp-Piston -Swing
| 09***58 | Ring-Retaining | 2 |
| 10***22 | Head Group-Pump; -Implement - Swing | 1 |
| 10***28 | Impeller-Lh | 1 |
133-3554 Pump Gp-Piston -Implement
| 09***21 | Washer, Spring | 4 |
| 13***54 | Pump Group-Piston; -Implement | 1 |
| 13***55 | Pump Group-Piston; -Implement | 1 |
117-5960 Pump Gp-Piston -Swing
| 09***58 | Ring-Retaining | 2 |
| 10***22 | Head Group-Pump; -Implement - Swing | 1 |
| 10***28 | Impeller-Lh | 1 |
190-3084 Pump Gp-Piston -Swing
| 09***58 | Ring-Retaining | 2 |
| 10***86 | Bolt; (M4x.7x12mm)(M4x0.7x12mm) | 4 |
| 11***16 | Pin | 4 |
138-4817 Pump Gp-Piston -Implement
| 09***58 | Ring-Retaining | 2 |
| 10***22 | Head Group-Pump; -Implement - Swing | 1 |
| 10***28 | Impeller-Lh | 1 |
138-4820 Pump Gp-Piston -Swing
| 09***58 | Ring-Retaining | 2 |
| 10***22 | Head Group-Pump; -Implement - Swing | 1 |
| 10***28 | Impeller-Lh | 1 |
138-4816 Pump Gp-Piston -Implement
| 09***58 | Ring-Retaining | 2 |
| 10***22 | Head Group-Pump; -Implement - Swing | 1 |
| 10***28 | Impeller-Lh | 1 |
133-3560 Pump Gp-Piston -Swing
| 09***58 | Ring-Retaining | 2 |
| 10***22 | Head Group-Pump; -Implement - Swing | 1 |
| 10***28 | Impeller-Lh | 1 |
6e-6562 Pump Gp-Piston -Radiator Cooling
| 00***69 | Cup-Roller Bearing | 1 |
| 00***71 | Cone-Bearing | 1 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
133-3558 Pump Gp-Piston -Swing
| 09***21 | Washer, Spring | 4 |
| 13***58 | Pump Group-Piston; -Swing | 1 |
| 13***59 | Pump Group-Piston; -Swing | 1 |
6e-6590 Pump Gp-Piston -Swing
| 09***21 | Washer, Spring | 4 |
| 11***59 | Pump Group-Piston; -Swing | 1 |
| 11***60 | Pump Group-Piston; -Swing | 1 |
138-4815 Pump Gp-Piston -Implement
| 09***21 | Washer, Spring | 4 |
| 13***15 | Pump Group-Piston; -Implement | 1 |
| 13***16 | Pump Group-Piston; -Implement | 1 |
190-3080 Pump Gp-Piston -Implement
| 09***58 | Ring-Retaining | 2 |
| 10***86 | Bolt; (M4x.7x12mm)(M4x0.7x12mm) | 4 |
| 11***16 | Pin | 4 |
144-8877 Pump Gp-Piston -Implement
| 14***77 | Pump Group-Piston; -Implement | 1 |
| 19***80 | Pump Group-Piston; -Implement | 1 |
| 19***81 | Pump Group-Piston; -Implement | 1 |
9t-2010 Rotating Gp-Motor -Hydraulic Oil Cooling Fan
| 11***20 | Screw; (M6x20-mm) | 7 |
| 11***17 | Spacer; (9.6-mm Thk) | 1 |
| 11***18 | Spacer; (9.7-mm Thk) | 1 |
122-9402 Rotating Gp-Motor -Swing
| 10***59 | Barrel | 1 |
| 11***65 | Plate | 1 |
| 12***02 | Rotating Group-Motor; -Swing | 1 |
9t-9438 Rotating Gp-Motor -Travel
| 10***65 | Bolt-Socket Head; (M8x1.25x20-mm) | 14 |
| 14***52 | Ring-Retaining | 1 |
| 14***80 | Seal-Lip Type | 1 |
117-6062 Rotating Gp-Motor -Radiator Fan
| 10***65 | Bolt-Socket Head; (M8x1.25x20-mm) | 14 |
| 11***62 | Rotating Group-Motor; -Radiator Fan | 1 |
| 11***16 | Shaft-Drive | 1 |
178-4006 Rotating Gp-Motor -Swing
| 10***59 | Barrel | 1 |
| 11***65 | Plate | 1 |
| 11***18 | Screw; (M8x20-mm) | 1 |
179-2220 Rotating Gp-Motor -Hydraulic Oil Fan
| 11***20 | Screw; (M6x20-mm) | 7 |
| 12***48 | Seal-Shaft | 1 |
| 16***69 | Piston Assem. | 7 |
105-5174 Rotating Gp-Pump -Implement, Swing
| 09***48 | Ring-Retaining | 1 |
| 10***40 | Bearing As | 1 |
| 10***43 | Swashplate | 1 |
105-5021 Rotating Gp-Pump -Implement, Swing
| 09***48 | Ring-Retaining | 1 |
| 10***40 | Bearing As | 1 |
| 10***43 | Swashplate | 1 |
190-3086 Rotating Gp-Pump -Implement, Swing
| 09***29 | Ring; (Retaining) | 1 |
| 14***73 | Roller | 4 |
| 16***89 | Bearing As | 1 |
6e-4216 Rotating Gp-Pump
| 6E***16 | Rotating Group-Pump; -Implement, Steering | 1 |
| 6E***17 | Plate-Limiter | 2 |
| 6E***18 | Plate-Spacer | 2 |
190-3088 Rotating Gp-Pump -Implement, Swing
| 09***29 | Ring; (Retaining) | 1 |
| 14***73 | Roller | 4 |
| 16***65 | Piston As | 9 |
138-9286 Rotating Gp-Pump -Implement, Swing
| 09***48 | Ring-Retaining | 1 |
| 10***40 | Bearing As | 1 |
| 10***43 | Swashplate | 1 |
138-9217 Rotating Gp-Pump -Implement, Swing
| 09***48 | Ring-Retaining | 1 |
| 10***40 | Bearing As | 1 |
| 10***43 | Swashplate | 1 |
172-2395 Screen Gp-Hydraulic -Hydraulic High Pressure
| 11***95 | Seal-O-Ring | 1 |
| 12***35 | Bolt-Socket Head; (M4x0.7x40-mm) | 4 |
| 13***66 | Screen; (Hydraulic High Pressure) | 1 |
112-2943 Screen Gp-Hydraulic -Hydraulic High Pressure
| 09***81 | Seal-O-Ring (Id=12.30mm) | 1 |
| 10***95 | Screen As-High Pressure | 2 |
| 10***98 | Socket As | 1 |
9t-2282 Shaft Gp-Hydraulic Motor -Cooling Fan
| 6E***26 | Shaft-Governor Control | 1 |
| 9T***38 | Ring-Bearing | 1 |
| 9T***04 | Nut-Bearing Lock | 1 |
184-1527 Swashplate Gp -Piston Pump
| 16***01 | Swashplate Stop | 2 |
| 18***27 | Swashplate Group; -Implement Pump | 1 |
| 1H***37 | Pin (Spring) | 2 |
6e-4221 Swashplate Gp -Piston Pump
| 13***32 | Block-Stop | 2 |
| 6E***21 | Swashplate Group; -Implement Pump | 1 |
| 8F***19 | Seal (4.47 Degrees I.D.) | 2 |
6e-6051 Swivel Gp -Track Motor
| 10***05 | Retainer | 1 |
| 4J***22 | Seal-Interface Between 3rd & Tilt Valve | 1 |
| 4J***27 | Seal-O-Ring -Pipe As. To Hydraulic Tank | 4 |
135-6258 Tank & Filter Gp-Hydraulic
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 32 |
| 10***72 | Cover As | 1 |
| 10***75 | Stud | 6 |
6e-6561 Tank & Filter Gp-Hydraulic
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 32 |
| 10***72 | Cover As | 1 |
| 10***75 | Stud | 6 |
140-1745 Tank & Filter Gp-Hydraulic
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 32 |
| 10***72 | Cover As | 1 |
| 10***03 | Bar As | 4 |
108-2495 Tank & Mtg Gp-Hydraulic
| 10***95 | Tank & Mtg Group-Hydraulic | 1 |
| 14***45 | Tank & Filter Group-Hydraulic | 1 |
| 6I***64 | Spacer; (22.2x34.9x50mm Thk) | 2 |
146-5232 Tank & Mtg Gp-Swing Drive
| 14***32 | Tank & Mtg Group-Swing Drive | 1 |
| 17***00 | Bracket As | 1 |
| 20***72 | Plate | 1 |
209-2109 Tank Gp-Hydraulic -Swing Drive
| 18***84 | Breather As; (Engine Oil) | 1 |
| 20***09 | Tank Group-Hydraulic; -Swing Drive | 1 |
| 2D***25 | Tee-To Shut-Off Control Group | 1 |
152-1842 Valve & Lines Gp-Implement -Mass Excavator
| 14***85 | Tube As | 1 |
| 14***86 | Tube As | 1 |
| 14***87 | Tube As | 1 |
152-1838 Valve & Lines Gp-Implement -Front Shovel
| 13***94 | Tube As | 1 |
| 14***85 | Tube As | 1 |
| 14***86 | Tube As | 1 |
110-8573 Valve & Lines Gp-Implement
| 11***73 | Valve & Lines Group-Implement | 1 |
| 11***74 | Hose As | 1 |
| 11***75 | Hose As | 1 |
108-4405 Valve & Mtg Gp-Crossover Rlf -Swing Dual Pressure
| 10***05 | Valve & Mtg Group-Crossover Rlf; -Swing Dual Pressure | 1 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 2 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 3 |
128-0093 Valve & Mtg Gp-Pressure Test
| 12***93 | Valve & Mtg Group-Pressure Test | 1 |
| 12***95 | Manifold | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
128-0092 Valve & Mtg Gp-Pressure Test
| 12***92 | Valve & Mtg Group-Pressure Test | 1 |
| 12***94 | Manifold | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 3 |
108-2496 Valve & Mtg Gp-Swing Motor
| 10***96 | Valve & Mtg Group-Swing Motor | 1 |
| 11***59 | Plate | 1 |
| 5J***69 | Screw-Bleeder | 2 |
161-2851 Valve & Mtg Gp-Swing Motor
| 11***59 | Plate | 1 |
| 16***51 | Valve & Mtg Group-Swing Motor | 1 |
| 16***81 | Valve Group-Control; -Swing | 1 |
6e-6554 Valve Gp-Blocker -Hyd Tank Suction Shutoff
| 10***25 | Lever | 1 |
| 6E***54 | Valve Group-Blocker; -Hydraulic Tank Suction Shutoff | 1 |
| 9X***40 | Seal-O-Ring | 1 |
111-1654 Valve Gp-Blocker -Hyd Tank Suction Shutoff
| 09***68 | Bolt-Socket Head; (M5x0.8x8-mm) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***54 | Valve Group-Blocker; -Hydraulic Tank Suction Shutoff | 1 |
6e-6042 Valve Gp-Check -Pilot
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
| 6E***42 | Valve Group-Check; -Directional Flow-Accumulator-Pilot Low Pressure-Pilot High Pressure | 1 |
122-8060 Valve Gp-Check
| 10***81 | Bolt-Socket Head; (M8x1.25x20-mm) | 2 |
| 11***12 | Housing | 1 |
| 11***14 | Retainer | 1 |
111-7441 Valve Gp-Control -Front Implement
| 10***05 | Manifold | 1 |
| 11***41 | Valve Group-Control; -Front Implement | 1 |
| 11***42 | Valve Group-Control; -Implement | 1 |
111-7443 Valve Gp-Control -Implement
| 10***07 | Spacer; (11.13x6.2x1.95-mm Thk) | 1 |
| 10***11 | Piston | 3 |
| 10***17 | Valve Group-Makeup; -Implement | 2 |
107-7500 Valve Gp-Control -Crossover, Track, Lh
| 10***07 | Spacer; (11.13x6.2x1.95-mm Thk) | 1 |
| 10***11 | Piston | 3 |
| 10***00 | Valve Group-Control; -Crossover, Track, Lh | 1 |
128-6982 Valve Gp-Control -Rear Travel & Implement
| 10***00 | Valve Group-Control; -Crossover, Track, Lh | 1 |
| 10***09 | Connector | 4 |
| 10***12 | Adapter | 4 |
106-9725 Valve Gp-Control -Implement
| 10***25 | Valve Group-Control; -Implement | 1 |
| 3F***45 | Spring | 3 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 6 |
107-7514 Valve Gp-Control -Track, Bottom, Rh, Dump
| 10***11 | Piston | 3 |
| 10***53 | Spacer | 1 |
| 10***14 | Valve Group-Control; -Track, Bottom, Rh, Dump | 1 |
157-3731 Valve Gp-Control -Implement Front Shovel
| 10***11 | Piston | 3 |
| 11***57 | Valve Group-Solenoid | 2 |
| 11***18 | Retainer | 3 |
107-7502 Valve Gp-Control -Travel, Implement
| 10***94 | Valve | 1 |
| 10***95 | Valve | 1 |
| 10***96 | Valve | 2 |
111-7442 Valve Gp-Control
| 10***11 | Piston | 3 |
| 10***53 | Spacer | 1 |
| 10***21 | Housing | 1 |
107-7516 Valve Gp-Control -Travel, Implement
| 10***16 | Valve Group-Control; -Travel, Implement | 1 |
| 3F***45 | Spring | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 6 |
157-3732 Valve Gp-Control -Implement Front Shovel
| 10***11 | Piston | 3 |
| 11***57 | Valve Group-Solenoid | 2 |
| 11***18 | Retainer | 3 |
162-8281 Valve Gp-Control -Swing
| 11***50 | Cover | 2 |
| 11***51 | Retainer-Spring | 2 |
| 11***52 | Spring; (Inner) | 2 |
148-9253 Valve Gp-Control -Rear Travel & Implement
| 10***09 | Connector | 4 |
| 10***12 | Adapter | 4 |
| 11***68 | Manifold | 1 |
107-7499 Valve Gp-Control -Rear Travel & Implement
| 10***99 | Valve Group-Control; -Rear Travel & Implement | 1 |
| 10***00 | Valve Group-Control; -Crossover, Track, Lh | 1 |
| 10***09 | Connector | 4 |
111-4544 Valve Gp-Control -Travel Motor
| 11***44 | Valve Group-Control; -Travel Motor | 1 |
| 11***86 | Hose As | 1 |
| 11***89 | Hose As | 1 |
128-6980 Valve Gp-Control -Front Implement
| 11***42 | Valve Group-Control; -Implement | 1 |
| 11***43 | Valve Group-Control; -Implement | 1 |
| 11***65 | Filter; (Edge) | 1 |
157-3733 Valve Gp-Control -Front Implement Front Shovel
| 11***65 | Filter; (Edge) | 1 |
| 12***00 | Valve Group-Reducing; -Implement, Travel-Signal Duplication | 1 |
| 12***51 | Manifold | 1 |
148-9257 Valve Gp-Control -Boom, Track, Lh
| 10***11 | Piston | 3 |
| 11***18 | Retainer | 3 |
| 11***30 | Retainer | 3 |
117-7497 Valve Gp-Control -Horsepower Control
| 11***97 | Valve Group-Control; -Horsepower Control | 1 |
| 11***25 | Setscrew | 1 |
| 4I***05 | Spool | 1 |
108-2497 Valve Gp-Control
| 10***97 | Valve Group-Control | 1 |
| 11***44 | Valve Group-Control; -Travel Motor | 1 |
| 8T***82 | Bolt; (M16x2x260-mm) | 4 |
6e-6560 Valve Gp-Control -Swing
| 11***50 | Cover | 2 |
| 11***51 | Retainer-Spring | 2 |
| 11***52 | Spring; (Inner) | 2 |
106-9726 Valve Gp-Control -Implement
| 10***26 | Valve Group-Control; -Implement | 1 |
| 3F***45 | Spring | 3 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 4 |
123-7021 Valve Gp-Control -Hyd Oil Cooler Shutoff
| 12***19 | Cover | 1 |
| 12***20 | Valve | 1 |
| 12***21 | Valve Group-Control; -Hydraulic Oil Cooler Shutoff | 1 |
152-1843 Valve Gp-Control
| 15***41 | Valve Group-Control; -Travel Motor | 1 |
| 15***43 | Valve Group-Control | 1 |
| 15***19 | Valve Group-Relief; -Mass Excavator Implement-Margin | 1 |
111-7442 Valve Gp-Control -Implement
| 10***11 | Piston | 3 |
| 10***53 | Spacer | 1 |
| 10***07 | Valve Group-Makeup; (Implement) | 2 |
148-9254 Valve Gp-Control -Track, Bottom, Rh, Dump
| 10***11 | Piston | 3 |
| 11***18 | Retainer | 3 |
| 11***30 | Retainer | 3 |
157-3728 Valve Gp-Control -Implement Mass Excavator
| 10***11 | Piston | 3 |
| 11***57 | Valve Group-Solenoid | 1 |
| 11***18 | Retainer | 3 |
157-3729 Valve Gp-Control -Implement Mass Excavator
| 10***11 | Piston | 3 |
| 11***57 | Valve Group-Solenoid | 1 |
| 11***18 | Retainer | 3 |
157-3730 Valve Gp-Control -Front Implement Mass Excavator
| 11***65 | Filter; (Edge) | 1 |
| 12***00 | Valve Group-Reducing; -Implement, Travel-Signal Duplication | 1 |
| 12***51 | Manifold | 1 |
152-1841 Valve Gp-Control -Travel Motor
| 11***86 | Hose As | 1 |
| 11***89 | Hose As | 1 |
| 12***19 | Hose As | 1 |
5i-8521 Valve Gp-Flow Compensator -Slow Return
| 5I***21 | Valve Group-Flow Compensator; -Slow Return Check | 1 |
| 5I***22 | Bushing | 1 |
| 5I***23 | Valve | 1 |
107-7517 Valve Gp-Makeup -Implement
| 10***17 | Valve Group-Makeup; -Implement | 1 |
| 2S***78 | Seal-O-Ring (Id=37.47mm) | 1 |
| 5F***78 | Seal --Drain Tube To Flywheel Housing; -- Drain Tube To Flywheel Housing | 1 |
104-9545 Valve Gp-Makeup -Fan Motor
| 10***45 | Valve Group-Makeup; -Fan Motor | 1 |
| 10***46 | Body | 1 |
| 1U***22 | Bearing-Sleeve; (12.65mm Id) | 1 |
160-7439 Valve Gp-Makeup -Implement Makeup
| 10***85 | Plug | 1 |
| 13***55 | Spring | 1 |
| 16***39 | Valve Group-Makeup; -Stick, Boom, Bucket-Travel | 1 |
101-1939 Valve Gp-Manifold & Relief -Track Tension
| 10***39 | Valve Group-Manifold & Relief; -Track Tension | 1 |
| 10***02 | Body-Manifold | 1 |
| 14***79 | Valve Group-Relief; -Track Tension | 1 |
152-9156 Valve Gp-Pilot -Implement Joystick
| 15***77 | Clip | 3 |
| 15***56 | Valve Group-Pilot; -Implement Joystick | 1 |
| 4I***07 | Spacer | 1 |
7i-5346 Valve Gp-Pilot -Implement Joystick
| 08***69 | Plate | 1 |
| 09***76 | Seal | 4 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 4 |
087-5675 Valve Gp-Pilot -Travel
| 08***48 | Bolt-Socket Head; (M8x1.25x30-mm)(M8x1.25x30mm) | 2 |
| 08***03 | Plug | 2 |
| 08***04 | Rod | 2 |
6i-6974 Valve Gp-Pilot -Implement Joystick
| 08***69 | Plate | 1 |
| 09***72 | Plate | 1 |
| 09***76 | Seal | 4 |
149-3824 Valve Gp-Pump Control
| 10***92 | Support | 1 |
| 14***24 | Valve Group-Pump Control; -Implement | 1 |
| 14***25 | Spring | 1 |
183-5939 Valve Gp-Pump Control -Swing Pump Regulator Control
| 08***01 | Plug As | 1 |
| 10***65 | Bolt-Socket Head; (M8x1.25x100-mm) | 5 |
| 11***96 | Valve Group-Pump Control; -Swing Piston Pump-High Pressure Cutoff | 1 |
283-9418 Valve Gp-Pump Control
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 03***36 | Seal-O-Ring | 1 |
| 28***18 | Valve Group-Pump Control | 1 |
158-9100 Valve Gp-Pump Control -Horsepower Control
| 15***00 | Valve Group-Pump Control; -Horsepower Control | 1 |
| 16***75 | Piston | 1 |
| 16***76 | Pin | 1 |
149-3821 Valve Gp-Pump Control -Impl Pump Regulator Control
| 00***93 | Seal-O-Ring (Id=52.07mm); (52.07-mm Id) | 1 |
| 10***51 | Valve Group-Pump Control; -Flow Compensator-Horsepower Control | 1 |
| 10***91 | Lever | 1 |
124-4281 Valve Gp-Pump Control -Regulator Control-Hyd Oil Cooling Pump
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 03***36 | Seal-O-Ring | 1 |
| 10***16 | Pin-Spring Stop | 1 |
110-6951 Valve Gp-Pump Control -Regulator Control-Cooling Pump Regulator Control
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 03***36 | Seal-O-Ring | 1 |
| 10***15 | Spool-Margin | 1 |
107-6440 Valve Gp-Pump Control -Pressure, Flow Compensator-Impl Pump Regulator Control
| 00***93 | Seal-O-Ring (Id=52.07mm); (52.07-mm Id) | 1 |
| 10***49 | Housing | 1 |
| 10***40 | Valve Group-Pump Control; -Pressure, Flow Compensator-Impl Pump Regulator Control | 1 |
107-6451 Valve Gp-Pump Control -Flow Compensator-Horsepower Control
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 09***45 | Plug-Hex; (9/16-18 Thd) | 1 |
| 10***41 | Pin | 1 |
117-7496 Valve Gp-Pump Control -Swing High Pressure Cutoff
| 11***96 | Valve Group-Pump Control; -Swing Piston Pump-High Pressure Cutoff | 1 |
| 11***22 | Spring | 1 |
| 11***24 | Setscrew | 1 |
4i-6283 Valve Gp-Pump Control -Flow Compensator-Load Sensing Control
| 10***26 | Piston | 1 |
| 10***93 | Retainer | 2 |
| 10***94 | Spring; (Margin) | 1 |
117-5963 Valve Gp-Pump Control -Swing Pump Regulator Control
| 00***93 | Seal-O-Ring (Id=52.07mm); (52.07-mm Id) | 1 |
| 11***63 | Valve Group-Pump Control; -Swing Pump Regulator Control | 1 |
| 11***95 | Housing | 1 |
183-5851 Valve Gp-Pump Control -Impl Pump Regulator Control
| 12***94 | Plug; (Break Off) | 7 |
| 14***93 | Pin | 2 |
| 15***00 | Valve Group-Pump Control; -Horsepower Control | 1 |
188-6536 Valve Gp-Pump Control -Positive Flow Control-Swing
| 10***11 | Retainer | 1 |
| 18***36 | Valve Group-Pump Control; -Swing Positive Flow Control | 1 |
| 18***37 | Piston | 1 |
114-9030 Valve Gp-Reducing -Signal Duplication
| 11***30 | Valve Group-Reducing; -Signal Duplication | 1 |
| 12***60 | Valve | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
124-1400 Valve Gp-Reducing -Signal Duplication
| 12***00 | Valve Group-Reducing; -Implement, Travel-Signal Duplication | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
123-4838 Valve Gp-Reducing -Signal Duplication
| 12***37 | Valve Group | 1 |
| 12***38 | Valve Group-Reducing; -Implement Signal Duplication | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
6e-6552 Valve Gp-Relief -Swing Crossover
| 09***70 | Bolt-Socket Hd; (M12 X 1.75 X 45) | 8 |
| 10***48 | Cone | 4 |
| 10***59 | Spring | 4 |
112-3306 Valve Gp-Relief -Load Sensing Signal
| 09***75 | Pin, Roller | 1 |
| 10***38 | Piston | 1 |
| 11***06 | Valve Group-Relief; -Load Sensing Signal | 1 |
115-5259 Valve Gp-Relief -Swing Control
| 09***00 | Seal-O-Ring | 1 |
| 10***63 | Kit-Seal; (Travel Line Control Valve) | 1 |
| 11***59 | Valve Group-Relief; -Swing Control | 1 |
127-7359 Valve Gp-Relief -Pilot High Pressure
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 12***59 | Valve Group-Relief; -Pilot High Pressure | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
9t-3541 Valve Gp-Relief -Track Tension
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
| 4T***42 | Spring | 1 |
| 4T***71 | Plate | 1 |
128-4097 Valve Gp-Relief -Cooler Bypass, Swing Back Pres
| 12***20 | Valve | 1 |
| 12***96 | Cover | 1 |
| 12***97 | Valve Group-Relief; -Cooler Bypass, Swing Back Pres | 1 |
112-3299 Valve Gp-Relief -Load Sensing Signal
| 10***40 | Adjuster | 1 |
| 10***41 | Adapter | 1 |
| 10***89 | Pin | 1 |
110-9203 Valve Gp-Relief -Margin
| 11***03 | Valve Group-Relief; -Margin | 1 |
| 11***04 | Valve Group-Relief; -Margin | 1 |
| 11***07 | Housing | 1 |
9t-8316 Valve Gp-Relief -Line, Makeup
| 11***75 | Ring-Backup (24.92mm Id) | 1 |
| 2P***75 | Seal-O-Ring | 1 |
| 2S***78 | Seal-O-Ring (Id=37.47mm) | 2 |
154-3410 Valve Gp-Relief -Travel Back Pressure
| 12***96 | Cover | 1 |
| 14***41 | Valve | 1 |
| 15***10 | Valve Group-Relief; -Travel Back Pressure-Cooler Bypass, Cap | 1 |
115-1743 Valve Gp-Relief -Load Sensing Signal
| 10***40 | Adjuster | 1 |
| 10***41 | Adapter | 1 |
| 10***89 | Pin | 1 |
143-9479 Valve Gp-Relief -Track Tension
| 14***79 | Valve Group-Relief; -Track Tension | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
| 4T***42 | Spring | 1 |
125-9320 Valve Gp-Relief -Swing Control, Travel Line
| 09***00 | Seal-O-Ring | 1 |
| 10***63 | Kit-Seal; (Travel Line Control Valve) | 1 |
| 12***50 | Seal-O-Ring | 1 |
155-8404 Valve Gp-Relief -Load Sensing Signal
| 10***40 | Adjuster | 1 |
| 10***41 | Adapter | 1 |
| 10***89 | Pin | 1 |
6e-6043 Valve Gp-Relief -Low Pressure
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
| 6E***43 | Valve Group-Relief; -Low Pressure | 1 |
124-8971 Valve Gp-Relief -Margin
| 11***07 | Housing | 1 |
| 12***71 | Valve Group-Relief; -Margin | 1 |
| 1P***09 | Seal-Rectangular | 2 |
153-3004 Valve Gp-Relief -Line, Crossover
| 11***75 | Ring-Backup (24.92mm Id) | 1 |
| 15***04 | Valve Group-Relief; -Stick Line-Bucket Line-Boom Line | 1 |
| 2P***75 | Seal-O-Ring | 1 |
148-0645 Valve Gp-Relief -Cooler Bypass
| 12***20 | Valve | 1 |
| 12***96 | Cover | 1 |
| 14***45 | Valve Group-Relief; -Cooler Bypass | 1 |
114-5593 Valve Gp-Relief -High Pressure
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 11***93 | Valve Group-Relief; -High Pressure | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
143-5909 Valve Gp-Relief -Margin
| 11***07 | Housing | 1 |
| 14***09 | Valve Group-Relief; -Margin | 1 |
| 1P***09 | Seal-Rectangular | 2 |
110-9204 Valve Gp-Relief -Margin
| 11***04 | Valve Group-Relief; -Margin | 1 |
| 11***05 | Body | 1 |
| 11***06 | Valve | 1 |
4t-5572 Valve Gp-Relief -Main
| 03***67 | Ring; (Back Up) | 1 |
| 03***79 | Seal-O-Ring (Id=10.82mm) | 1 |
| 03***36 | Seal-O-Ring | 2 |
152-2119 Valve Gp-Relief -Margin
| 11***07 | Housing | 1 |
| 15***19 | Valve Group-Relief; -Mass Excavator Implement-Margin | 1 |
| 1P***09 | Seal-Rectangular | 2 |
127-5652 Valve Gp-Relief -Line, Makeup
| 11***75 | Ring-Backup (24.92mm Id) | 1 |
| 12***52 | Valve Group-Relief; -Stick Line-Bucket Line-Boom Line | 1 |
| 2S***78 | Seal-O-Ring (Id=37.47mm) | 2 |
123-7017 Valve Gp-Relief -Pilot Low Pressure
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 12***17 | Valve Group-Relief; -Pilot Lines Low Pressure | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
118-2431 Valve Gp-Relief -Load Sensing Signal
| 09***75 | Pin, Roller | 1 |
| 10***38 | Piston | 1 |
| 11***07 | Housing | 1 |
087-5054 Valve Gp-Selector -Hydraulic Lockout
| 08***73 | Retainer | 1 |
| 08***75 | Lever; (Hydraulic Activation Control) | 1 |
| 08***54 | Valve Group-Selector; -Hydraulic Lockout | 1 |
102-0801 Valve Gp-Shuttle -Resolver-Implement Pump
| 10***01 | Valve Group-Shuttle; -Resolver-Implement Pump | 1 |
| 10***14 | Bushing | 1 |
| 6E***64 | Valve-Shuttle | 1 |
6e-4429 Valve Gp-Shuttle -Ball Resolver
| 14***03 | Seal-O-Ring | 1 |
| 14***04 | Ring-Backup | 2 |
| 14***05 | Ring-Backup | 2 |
9t-9640 Valve Gp-Shuttle -Ball Resolver
| 1M***18 | Ball | 1 |
| 4J***77 | Seal - O - Ring (11.23mm Od) | 1 |
| 4T***25 | Seat | 1 |
4t-1860 Valve Gp-Shuttle
| 14***03 | Seal-O-Ring | 1 |
| 14***04 | Ring-Backup | 2 |
| 14***05 | Ring-Backup | 2 |
138-6779 Valve Gp-Shuttle -Resolver-Implement Pump
| 10***14 | Bushing | 1 |
| 13***79 | Valve Group-Shuttle; -Resolver-Implement Pump-Swing Pump | 1 |
| 13***80 | Valve-Shuttle | 1 |
127-0272 Valve Gp-Solenoid
| 10***18 | Kit-Seal; (Rad/Hydraulic Cooling Fan Pump Sol) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***71 | Coil As | 1 |
108-3011 Valve Gp-Solenoid
| 10***38 | Valve Group-Solenoid | 2 |
| 10***11 | Valve Group-Solenoid | 1 |
| 10***56 | Block-Manifold | 1 |
6t-5859 Valve Gp-Solenoid
| 10***70 | Locknut; (1/4-20-Thd) | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
| 4B***76 | Washer Generator Line Leads (Use As Required) | 1 |
6v-2654 Valve Gp-Solenoid
| 10***19 | Valve Group-Solenoid | 1 |
| 3E***84 | Manifold | 1 |
| 6V***54 | Valve Group-Solenoid | 1 |
152-8344 Valve Gp-Solenoid
| 11***43 | Locknut; (5/16-18-Thd) | 1 |
| 14***05 | Coil Assem. | 1 |
| 15***43 | Cartridge As-Valve | 1 |
183-7595 Valve Gp-Solenoid -Demand Fan
| 14***28 | Washer-Spring | 1 |
| 18***95 | Valve Group-Solenoid; -Demand Fan | 1 |
| 18***91 | Coil As | 1 |
104-7015 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***15 | Valve Group-Solenoid | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
111-7457 Valve Gp-Solenoid
| 11***57 | Valve Group-Solenoid | 1 |
| 15***33 | Valve Group-Solenoid | 1 |
| 7T***46 | Valve Group-Solenoid; (Warm-Up & Boom Float) | 1 |
3e-9257 Valve Gp-Solenoid
| 10***70 | Locknut; (1/4-20-Thd) | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
| 3E***57 | Valve Group-Solenoid | 1 |
152-8384 Valve Gp-Solenoid
| 11***43 | Locknut; (5/16-18-Thd) | 1 |
| 15***83 | Cartridge As | 1 |
| 15***84 | Valve Group-Solenoid; -Differential Lock | 1 |
7t-9746 Valve Gp-Solenoid
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
| 2D***35 | Locknut (Visor To Bracket) | 1 |
| 4B***76 | Washer Generator Line Leads (Use As Required) | 1 |
100-4338 Valve Gp-Solenoid
| 03***79 | Seal-O-Ring (Id=10.82mm) | 1 |
| 10***38 | Valve Group-Solenoid | 1 |
| 6V***78 | Seal-O-Ring; (25.12mm Id) | 1 |
100-4319 Valve Gp-Solenoid
| 10***18 | Kit-Seal; (Rad/Hydraulic Cooling Fan Pump Sol) | 1 |
| 10***19 | Valve Group-Solenoid | 1 |
| 3E***85 | Coil As | 1 |
152-8333 Valve Gp-Solenoid
| 11***43 | Locknut; (5/16-18-Thd) | 2 |
| 14***05 | Coil Assem. | 1 |
| 15***32 | Cartridge As-Valve | 1 |
152-8345 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***43 | Locknut; (5/16-18-Thd) | 2 |
| 15***43 | Cartridge As-Valve | 1 |
125-9317 Valve Gp-Travel Counterbalance -Travel Line
| 10***48 | Cone | 2 |
| 10***49 | Plug | 2 |
| 10***55 | Retainer | 2 |
125-9302 Valve Gp-Travel Counterbalance -Travel Line
| 12***02 | Valve Group-Travel Counterbalance; -Travel Line | 1 |
| 6E***55 | Valve Group-Travel Counterbalance; -Travel Line | 1 |
6e-6555 Valve Gp-Travel Counterbalance -Travel Line
| 09***00 | Seal-O-Ring | 1 |
| 10***48 | Cone | 2 |
| 10***49 | Plug | 2 |
Implements
108-5784 Boom & Bearing As-Front Shovel
| 10***84 | Boom & Bearing As-Front Shovel | 1 |
| 11***50 | Ring-Retaining; (357.00mm Od) | 4 |
| 12***92 | Bearing; (220.00mm Id) | 2 |
115-5417 Boom & Bearing As-Mass Ex
| 10***96 | Ring-Retaining | 4 |
| 10***50 | Bearing-Aligning; (180.0mm Id) | 2 |
| 11***17 | Boom & Bearing As-Mass Ex | 1 |
108-5777 Boom Ar-Front Shovel
| 10***77 | Boom Ar-Front Shovel | 1 |
| 10***84 | Boom & Bearing As-Front Shovel | 1 |
| 10***85 | Lubrication Group-Automatic; -Front Shovel Boom | 1 |
114-9524 Boom Ar-Mass
| 11***87 | Film-Identification; (Cat) | 2 |
| 11***24 | Boom Ar-Mass | 1 |
| 11***17 | Boom & Bearing As-Mass Ex | 1 |
115-5520 Lines Gp-Grease -Linkage Lh-Lh-Linkage
| 00***54 | Nipple-Pipe | 2 |
| 03***77 | Tee-Pipe | 1 |
| 11***19 | Hose As | 1 |
116-4012 Lines Gp-Grease -Linkage Chassis
| 11***12 | Lines Group-Grease; -Linkage Chassis-Mass Excavator | 1 |
| 3E***21 | Clip | 1 |
| 6V***98 | Seal-O-Ring -Line From Gear Pump Output | 2 |
115-5521 Lines Gp-Grease -Linkage Rh
| 11***21 | Lines Group-Grease; -Linkage Rh-Mass Excavator | 1 |
| 11***39 | Plate As | 2 |
| 11***10 | Pipe | 1 |
115-5452 Linkage Gp-Bucket
| 11***23 | Bearing; (180.323-mm Id) | 4 |
| 11***47 | Pin | 3 |
| 11***49 | Cover | 6 |
108-5781 Pin Gp-Excavator -Front Shovel
| 10***92 | Cover | 2 |
| 10***94 | Cover | 2 |
| 10***96 | Cover | 4 |
108-5774 Pin Gp-Excavator -Front Shovel Bucket
| 10***93 | Bearing | 2 |
| 10***01 | Bearing | 8 |
| 10***02 | Bearing; (150.2-mm Id) | 4 |
116-3932 Pin Gp-Excavator -Boom Base
| 10***90 | Cover | 2 |
| 11***32 | Pin Group-Excavator; -Boom Base | 1 |
| 6I***60 | Pin | 1 |
115-5450 Pin Gp-Excavator -Mass Excavator
| 10***92 | Cover | 2 |
| 10***96 | Cover | 4 |
| 10***98 | Pin | 2 |
119-4451 Pin Gp-Excavator -Front Shovel Bottom Dump
| 11***92 | Cover | 2 |
| 11***51 | Pin Group-Excavator; -Front Shovel Bottom Dump | 1 |
| 6I***63 | Pin | 2 |
108-5790 Stick & Bearing As
| 10***90 | Stick & Bearing As | 1 |
| 11***16 | Bearing; (240.50mm Id) | 2 |
| 14***17 | Bearing; (280.360mm Id) | 2 |
115-5421 Stick & Bearing As
| 10***96 | Ring-Retaining | 4 |
| 10***50 | Bearing-Aligning; (180.0mm Id) | 2 |
| 11***58 | Plate | 1 |
108-5782 Stick Ar-Front Shovel
| 10***82 | Stick Ar-Front Shovel | 1 |
| 10***89 | Lubrication Group-Automatic; -Front Shovel Stick | 1 |
| 10***90 | Stick & Bearing As | 1 |
114-9525 Stick Ar-Mass Excavator
| 11***25 | Stick Ar-Mass Excavator | 1 |
| 11***21 | Stick & Bearing As | 1 |
| 11***52 | Linkage Group-Bucket; -Mass Excavator | 1 |
Lubrication System
7e-9082 Breather Gp
| 03***31 | Seal-O-Ring | 2 |
| 1A***79 | Capscrew (5/16 - 18 Nc X 1 1/2 Gd5, Hex) | 8 |
| 2W***72 | Seal-O-Ring; (221.62mm Id) | 2 |
101-0838 Breather Gp -Crankcase
| 03***31 | Seal-O-Ring | 2 |
| 10***38 | Breather Group; -Crankcase | 1 |
| 10***99 | Cover As | 2 |
7n-1875 Filler Gp-Engine Oil -Cylinder Block
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
| 2W***52 | Gasket | 1 |
| 5M***94 | Washer; Bracket To Tee, Bracket To Block, Tube As. To Tee, Tube As. To Oil Cooler | 4 |
106-4697 Filter Gp-Engine Oil
| 06***56 | Seal-O-Ring | 4 |
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 6 |
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 6 |
108-2701 Fumes Disposal Gp
| 10***01 | Fumes Disposal Group | 1 |
| 11***70 | Tube | 1 |
| 11***71 | Tube | 1 |
6i-3515 Gauge Gp-Oil Level (Dipstick)
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 11***43 | Gauge As-Oil Level | 1 |
| 4F***65 | Gasket-Shaft | 1 |
119-6325 Gauge Gp-Oil Level (Dipstick)
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 11***25 | Gauge Group-Oil Level (Dipstick) | 1 |
| 11***52 | Gauge As-Oil Level | 1 |
6i-3517 Lines Gp-Engine Oil
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 10 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 8 |
107-0740 Lines Gp-Turbocharger Oil
| 00***81 | Tee-Union; (Flared 37-Deg) | 2 |
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 4 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 16 |
115-5679 Oil Change Gp-High Speed
| 10***28 | Hose As | 1 |
| 11***79 | Oil Change Group-High Speed | 1 |
| 2P***93 | Locknut-Bulkhead; (1 3/16-12 Thd) | 1 |
126-2657 Prelubrication Ar-Engine
| 03***11 | Terminal-Ring; (2-Ga, 5/16-In Screw) | 2 |
| 03***42 | Seal-O-Ring; (11.89mm Id) | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
116-7153 Pump & Motor Gp-Prelubrication
| 11***53 | Pump & Motor Group-Prelubrication | 1 |
| 15***58 | Connector | 1 |
| 15***59 | Connector | 1 |
106-9873 Pump Gp-Engine Oil -2-Section Gear
| 10***72 | Pump Group-Engine Oil; -2-Section Gear | 1 |
| 10***73 | Pump Group-Engine Oil; -2-Section Gear | 1 |
| 1B***73 | Bolt 8.50 In.(215.90 mm) Long | 3 |
106-9872 Pump Gp-Engine Oil -2-Section Gear
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 6 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 9 |
| 10***67 | Shaft As-Idler; (12-Teeth) | 2 |
8n-2012 Pump Gp-Scavenge -Front Sump
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 8 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 2 |
144-8267 Pump Gp-Scavenge
| 05***79 | Washer; (13.5x44.45x10-mm Thk) | 1 |
| 0S***84 | Cap Screw (2 1/4" Long) | 1 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 4 |
1w-8508 Pump Gp-Scavenge
| 05***79 | Washer; (13.5x44.45x10-mm Thk) | 1 |
| 0S***84 | Cap Screw (2 1/4" Long) | 1 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 4 |
Machine Arrangement
207-7527 Conversion Ar-Machine -Swing Drive Flood Fill-Remote Swing Drive Fill
| 14***28 | Lines Group-Swing Drive | 1 |
| 14***32 | Tank & Mtg Group-Swing Drive | 1 |
| 20***27 | Conversion Ar-Machine; -Swing Drive Flood Fill-Remote Swing Drive Fill | 1 |
207-2774 Conversion Ar-Machine -Swing Drive Service-Remote Swing Drive
| 00***14 | Coupling-Pipe | 1 |
| 09***49 | Clip | 1 |
| 16***53 | Connector | 3 |
114-9523 Hoe Ar-Mass Excavator
| 11***45 | Control Group-Joystick; -Mass Excavator | 1 |
| 11***23 | Hoe Ar-Mass Excavator | 1 |
| 11***24 | Boom Ar-Mass | 1 |
115-5519 Installation Ar-Field -Mass Excavator
| 11***24 | Cylinder Group-Stick; -Mass Excavator | 2 |
| 11***50 | Pin Group-Excavator; -Mass Excavator | 1 |
| 11***19 | Installation Ar-Field; -Mass Excavator | 1 |
108-5783 Shovel Ar-Front
| 10***49 | Lighting Group-Front Shovel; -Front Shovel | 1 |
| 10***35 | Cylinder Group-Stick; -Front Shovel | 2 |
| 10***36 | Cylinder Group-Bucket; -Front Shovel | 2 |
Operator Station
159-4556 Air Conditioner & Mounting Gp
| 03***32 | Strap--Harness Assembly To Compressor | 4 |
| 03***13 | Mount | 6 |
| 06***41 | Mount | 5 |
106-4052 Air Conditioner & Mounting Gp
| 03***32 | Strap--Harness Assembly To Compressor | 2 |
| 06***41 | Mount | 5 |
| 10***25 | Air Conditioner Group | 1 |
100-6925 Air Conditioner Gp
| 03***38 | Clamp | 2 |
| 06***93 | Grommet; (Rh) | 1 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
130-2007 Air Conditioner Gp
| 06***93 | Grommet; (Rh) | 1 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
8y-4200 Armrest Gp -Rh
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 1K***72 | Locknut Horn To Guard | 1 |
| 2M***49 | Washer-Retainer To Fan Bracket Assembly | 1 |
8y-6000 Armrest Gp -Lh
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 1K***72 | Locknut Horn To Guard | 1 |
| 2M***49 | Washer-Retainer To Fan Bracket Assembly | 1 |
8y-5904 Armrest Gp
| 3E***12 | Nut-Square; (3/8-16-Thd) | 1 |
| 6V***87 | Screw-Pan Head; (10-24x1-In) | 4 |
| 8S***03 | Ring-Retaining | 1 |
6i-7129 Cab Gp
| 09***65 | Spacer; (17x40x3-mm Thk) | 3 |
| 09***37 | Spacer; (12-mm Thk) | 1 |
| 12***66 | Insulation As | 1 |
172-6070 Cab Gp
| 09***65 | Spacer; (17x40x3-mm Thk) | 3 |
| 10***47 | Screw; (1/4x14x1-In) | 20 |
| 12***07 | Plate | 2 |
7e-0962 Compressor Gp-Refrigerant
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 4 |
3e-3768 Compressor Gp-Refrigerant
| 01***11 | Screw; (10-16x0.25-In) | 3 |
| 14***97 | Valve As-Relief; (Refrigerant Compressor) | 1 |
| 1P***56 | Plate | 1 |
198-4564 Compressor Gp-Refrigerant
| 01***11 | Screw; (10-16x0.25-In) | 3 |
| 14***97 | Valve As-Relief; (Refrigerant Compressor) | 1 |
| 19***64 | Compressor Group-Refrigerant | 1 |
147-0392 Compressor Gp-Refrigerant
| 14***92 | Compressor Group-Refrigerant | 1 |
| 14***97 | Valve As-Relief; (Refrigerant Compressor) | 1 |
| 1P***56 | Plate | 1 |
159-7186 Condenser & Mtg Gp-Refrigerant
| 11***69 | Support As | 1 |
| 11***70 | Support As | 1 |
| 13***02 | Core As-Condenser | 1 |
117-4687 Condenser & Mtg Gp-Refrigerant
| 11***69 | Support As | 1 |
| 11***70 | Support As | 1 |
| 11***87 | Condenser & Mtg Group-Refrigerant | 1 |
111-7963 Console Gp-Instrument -Rh
| 01***16 | Setscrew; (8-32x0.5-In) | 1 |
| 10***18 | Switch As-Rocker; (Ladder Lamp) | 1 |
| 10***19 | Switch As-Rocker; (Dome Lamp) | 1 |
112-1411 Console Gp-Operator
| 09***09 | Adjuster | 2 |
| 09***83 | Nut-Self-Locking; (M10x1.50 Thd) | 1 |
| 10***09 | Cover | 1 |
112-1410 Console Gp-Operator
| 09***09 | Adjuster | 2 |
| 09***83 | Nut-Self-Locking; (M10x1.50 Thd) | 1 |
| 10***09 | Cover | 1 |
110-7888 Control Gp-Handle -Mass Excavator
| 10***51 | Loom; (39 cm) | 0 |
| 10***51 | Switch As; (Boom Float-Rh, Horn-Lh) | 1 |
| 10***06 | Plate-Spacer; (1.6-mm Thk) | 2 |
141-2036 Control Gp-Handle -Mass Excavator, Rh
| 10***31 | Adapter | 1 |
| 14***36 | Control Group-Handle; -Mass Excavator, Rh | 1 |
| 2S***18 | Screw-Machine; (6-32x0.625-In) | 2 |
129-6469 Control Gp-Handle -Front Shovel
| 10***06 | Plate-Spacer; (1.6-mm Thk) | 2 |
| 10***31 | Adapter | 1 |
| 12***69 | Control Group-Handle; -Front Shovel | 1 |
149-2661 Control Gp-Handle -Front Shovel
| 10***06 | Plate-Spacer; (1.6-mm Thk) | 2 |
| 10***31 | Adapter | 1 |
| 12***70 | Switch & Cover As; (Rh/Boom Float, Lh/Horn) | 1 |
100-6494 Control Gp-Handle -Front Shovel
| 10***94 | Control Group-Handle; -Front Shovel | 1 |
| 10***51 | Loom; (39 cm) | 0 |
| 10***51 | Switch As; (Boom Float-Rh, Horn-Lh) | 1 |
149-2681 Control Gp-Handle -Mass Excavator, Lh
| 10***06 | Plate-Spacer; (1.6-mm Thk) | 2 |
| 10***31 | Adapter | 1 |
| 12***70 | Switch & Cover As; (Rh/Boom Float, Lh/Horn) | 1 |
283-1118 Control Gp-Heat & Air Cond
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***74 | Kit-Connecting Plug; (6-Pin)(Cat Electronic Display Harness) | 1 |
141-2035 Control Gp-Joystick -Mass Excavator
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***99 | Wrap-Spiral; (3/8-In Od)(307-cm) | 0 |
| 14***35 | Control Group-Joystick; -Mass Excavator | 1 |
6i-7132 Control Gp-Joystick -Front Shovel
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
| 12***99 | Wrap-Spiral; (3/8-In Od)(307-cm) | 0 |
| 14***61 | Control Group-Handle; -Front Shovel | 2 |
6i-6954 Control Gp-Joystick -Implement, Rh Joystick
| 08***89 | Grommet | 1 |
| 08***70 | Sleeve | 2 |
| 6I***52 | Control Group-Pilot Operated Hydraulic; -Mass Excavator Rh | 1 |
112-7045 Control Gp-Joystick -Mass Excavator
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
| 11***88 | Control Group-Handle; -Mass Excavation, Lh | 2 |
| 11***45 | Control Group-Joystick; -Mass Excavator | 1 |
124-5020 Control Gp-Joystick -Mass Excavator
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
| 12***20 | Control Group-Joystick; -Mass Excavator | 1 |
| 3E***77 | Wedge-Receptacle Lock; (4-Pin) | 2 |
6i-6945 Control Gp-Joystick -Implement, Lh Joystick
| 08***89 | Grommet | 1 |
| 08***70 | Sleeve | 2 |
| 6I***51 | Control Group-Pilot Operated Hydraulic; -Mass Excavator Lh | 1 |
111-6218 Control Gp-Pilot Operated Hyd -Cab
| 08***08 | Grommet | 2 |
| 08***54 | Valve Group-Selector; -Hydraulic Lockout | 1 |
| 08***75 | Valve Group-Pilot | 2 |
6i-5352 Control Gp-Handle -Mass Excavator Rh
| 09***17 | Screw-Machine; (M5x0.8x6-mm) | 2 |
| 11***29 | Lever | 1 |
| 6I***88 | Switch As-Push; (One Touch-Low Idle) | 1 |
6i-5351 Control Gp-Handle -Mass Excavator Lh
| 09***17 | Screw-Machine; (M5x0.8x6-mm) | 2 |
| 11***29 | Lever | 1 |
| 6I***88 | Switch As-Push; (One Touch-Low Idle) | 1 |
112-1409 Control Gp-Pilot Operated Hyd -Lh
| 08***08 | Grommet | 1 |
| 08***09 | Strip | 1 |
| 11***09 | Control Group-Pilot Operated Hydraulic; -Lh | 1 |
152-1832 Control Gp-Pilot Operated Hyd -Cab
| 08***08 | Grommet | 2 |
| 08***54 | Valve Group-Selector; -Hydraulic Lockout | 1 |
| 08***75 | Valve Group-Pilot | 2 |
112-1408 Control Gp-Pilot Operated Hyd -Rh
| 08***08 | Grommet | 1 |
| 08***09 | Strip | 1 |
| 11***08 | Control Group-Pilot Operated Hydraulic; -Rh | 1 |
165-8682 Control Gp-Unprgmed Monitor -Vids/Vims Main Module
| 10***85 | Battery; (Lithium)(Internal Backup) | 1 |
| 13***20 | Film-Identification; (Vids, Vims Main Module) | 1 |
| 16***82 | Control Group-Unprgmed Monitor; -Vids/Vims Main Module | 1 |
8y-6883 Extension Gp-Backrest -Cloth
| 11***30 | Kit-Cushion; (Cloth Backrest) | 1 |
| 8Y***77 | Pan As-Extension | 1 |
| 8Y***47 | Fastener | 2 |
9x-9657 Fan Gp-Circulating
| 1B***13 | Bolt,Machine Governor And Decelerator Control | 1 |
| 1M***30 | Nut And Lock Assem.; (No. 10-32) | 2 |
| 2D***35 | Locknut (Visor To Bracket) | 1 |
7i-5347 Fan Gp-Defroster
| 2V***60 | Grommet | 2 |
| 7I***47 | Fan Group-Defroster | 1 |
| 7T***03 | Resistor | 2 |
108-2548 Guard Gp-Front Window
| 10***48 | Guard Group-Front Window | 1 |
| 10***01 | Guard As | 1 |
| 11***22 | Spacer; (22x25x15-mm Thk) | 4 |
5d-6998 Horn Gp-Air
| 15***87 | Cover | 2 |
| 2G***64 | Kit-Diaphragm; (Air Horn) | 2 |
| 4B***75 | Washer (1.75 In. Outside Diameter) | 1 |
6i-7639 Horn Gp-Air
| 11***72 | Hose As | 1 |
| 12***06 | Plate As | 2 |
| 2G***33 | Bracket | 1 |
108-4582 Housing Gp-Seat Suspension
| 09***78 | Pin-Spring | 1 |
| 10***24 | Kit-Indicator; (Weight Adjustment)(Suspension Seat) | 1 |
| 10***79 | Kit-Bumper; (Weight Adjustment)(Suspension Seat) | 1 |
6i-7135 Installation Gp-Radio
| 10***73 | Cable As | 1 |
| 4E***11 | Bushing-Terminal | 1 |
| 6I***35 | Installation Group-Radio | 1 |
159-7493 Lines Gp-Air Conditioner -Chassis
| 10***99 | Valve As; (Air Conditioner Refrigerant) | 1 |
| 15***93 | Lines Group-Air Conditioner; -Chassis | 1 |
| 15***35 | Hose As | 1 |
108-2499 Lines Gp-Air Conditioner
| 10***99 | Lines Group-Air Conditioner | 1 |
| 11***70 | Hose As | 1 |
| 11***71 | Hose As | 1 |
159-7201 Lines Gp-Air Conditioner -Rh Enclosure
| 10***93 | Valve As | 1 |
| 10***94 | Gasket | 1 |
| 15***43 | Hose As | 1 |
108-2519 Lines Gp-Air Conditioner -Rh
| 10***09 | Plate | 1 |
| 10***19 | Lines Group-Air Conditioner; -Rh | 1 |
| 11***86 | Hose As | 1 |
121-2814 Lines Gp-Air Conditioner -Rh
| 10***09 | Plate | 1 |
| 11***87 | Hose As | 1 |
| 11***58 | Plate-Instruction; (Air Conditioner) | 1 |
121-2815 Lines Gp-Air Conditioner
| 11***70 | Hose As | 1 |
| 11***71 | Hose As | 1 |
| 12***15 | Lines Group-Air Conditioner | 1 |
160-0026 Lines Gp-Heater -Rh Enclosure
| 00***14 | Elbow (90 Degrees Pipe) | 1 |
| 00***89 | Valve As-Drain | 2 |
| 13***53 | Hose; (192.5cm) (X2) | 0 |
160-0193 Lines Gp-Heater -Chassis
| 13***53 | Hose; (192.5cm) (X2) | 0 |
| 16***93 | Lines Group-Heater; -Chassis | 1 |
| 5D***26 | Clamp-Band; (9/16 To 1 1/16) | 4 |
102-2357 Lines Gp-Heater
| 10***57 | Lines Group-Heater | 1 |
| 13***91 | Hose; (499.5-cm Each) | 0 |
| 5D***26 | Clamp-Band; (9/16 To 1 1/16) | 4 |
108-3274 Lines Gp-Heater -Rh
| 00***14 | Elbow (90 Degrees Pipe) | 1 |
| 00***89 | Valve As-Drain | 2 |
| 10***74 | Lines Group-Heater; -Rh | 1 |
147-0879 Literature Gp
| 09***45 | Cable; (Lanyard) | 1 |
| 14***79 | Literature Group | 1 |
| 5P***58 | Sleeve; (Cable Splice) | 2 |
6i-7248 Mirror Gp-Rear View
| 5P***71 | Mirror | 1 |
| 6I***48 | Mirror Group-Rear View | 1 |
| 7I***64 | Bracket As | 1 |
7i-5318 Module Gp-Display -Vims
| 10***66 | Bezel | 3 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
149-2357 Module Gp-Message Center
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 14***57 | Module Group-Message Center; -Vids-Vids, Vims | 1 |
108-8421 Pan Gp-Backrest -Lumbar
| 10***21 | Pan Group-Backrest; -Seat Back | 1 |
| 10***23 | Shaft As-Lumbar | 1 |
| 10***24 | Pan-Lumbar | 1 |
8y-5992 Pan Gp-Seat
| 3K***97 | Pin 3.18 mm(.125 In.) Diameter | 4 |
| 6V***56 | Ring-Retaining | 2 |
| 8Y***92 | Pan As-Seat; (Bottom) | 1 |
129-8221 Screen Gp-Sun
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 16 |
| 10***47 | Screen Group-Sun | 1 |
| 10***48 | Screen Group-Sun | 1 |
8y-6969 Screen Gp-Sun
| 10***48 | Bracket | 2 |
| 10***51 | Guide | 1 |
| 10***52 | Knob | 1 |
8y-3792 Seat Belt Gp -Operator
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
| 8T***60 | Washer-Hard (For Use With 7/16 In Bolts) | 1 |
| 8Y***92 | Seat Belt Group; -Retractable-Operator | 1 |
8y-6857 Seat Belt Gp -Operator
| 0T***44 | Bolt (1.25" Long) | 1 |
| 5V***62 | Bolt-Shoulder; (7/16-20x1.26-In) | 2 |
| 7X***10 | Washer-Hard; (15.5x29x3-mm Thk) | 2 |
156-1149 Seat Belt Gp
| 15***49 | Seat Belt Group; -Retractable | 1 |
| 5V***62 | Bolt-Shoulder; (7/16-20x1.26-In) | 1 |
| 7X***10 | Washer-Hard; (15.5x29x3-mm Thk) | 1 |
122-4617 Seat Belt Gp -Retractable
| 12***17 | Seat Belt Group; -Retractable-Operator | 1 |
| 1A***50 | Bolt (7/16-20x1.75in); (7/16-20x1.75-In) | 1 |
| 4D***32 | Locknut (7/16-20 Thd) | 1 |
156-1148 Seat Belt Gp
| 15***48 | Seat Belt Group; -Retractable-Operator | 1 |
| 1A***50 | Bolt (7/16-20x1.75in); (7/16-20x1.75-In) | 1 |
| 1L***80 | Bolt; (7/16-20x1.5-In) | 1 |
6i-7139 Seat Gp
| 11***01 | Support As-Seat | 1 |
| 2D***06 | Plug (1 In. Dia.); To Support Assembly | 4 |
| 6I***39 | Seat Group | 1 |
8y-6882 Seat Gp -Cloth, Lumbar
| 06***03 | Shim (.060mm Thk); (1.52-mm Thk) | 4 |
| 09***78 | Pin-Spring | 1 |
| 09***14 | Pin, Clevis | 1 |
6i-7140 Seat Gp-Companion
| 12***34 | Seat Group-Companion | 1 |
| 17***89 | Box As | 1 |
| 19***65 | Mat | 1 |
7i-5181 Seat Gp-Companion
126-8334 Seat Gp-Companion
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 2 |
| 11***29 | Cushion As | 2 |
| 12***34 | Seat Group-Companion | 1 |
8y-6937 Seat Gp-Suspension
| 11***40 | Frame As-Seat | 1 |
| 11***54 | Kit-Cover | 1 |
| 11***56 | Kit-Spring Handle | 1 |
8y-6977 Seat Gp-Suspension
| 10***82 | Suspension Group-Seat; -Contour-Shock Absorber | 1 |
| 14***45 | Kit-Slider Block; (Suspension Seat) | 1 |
| 15***48 | Seat Belt Group; -Retractable-Operator | 1 |
103-8820 Seat Gp-Suspension
| 10***20 | Seat Group-Suspension; -Contour | 1 |
| 7I***80 | Support As | 1 |
| 7I***51 | Cover | 1 |
108-4082 Suspension Gp-Seat -Contour
| 10***03 | Fastener | 20 |
| 10***94 | Kit-Tether Belt; (Suspension Seat)(Seat Suspension) | 1 |
| 10***95 | Kit-Suspension Roller; (Suspension Seat)(Seat Suspension) | 1 |
107-2922 Tank Gp-Window Washer
| 10***22 | Tank Group-Window Washer | 1 |
| 5P***92 | Hose 4.13 M(162.5 In.); 200.0mm(7.88in) Lg | 0 |
| 5P***85 | Clip; (7.94mm Id) | 6 |
7i-5377 Visor Gp-Cab
| 7I***77 | Visor Group-Cab | 1 |
| 8T***05 | Washer, Flat-Thin(1/4); W/O Freespool Qty Is 12 | 2 |
| 8Y***69 | Screen Group-Sun | 1 |
8y-6950 Window Gp-Cab
| 10***91 | Window Group-Cab | 1 |
| 10***44 | Glass-Fixed | 1 |
| 10***45 | Glass-Fixed | 1 |
132-8435 Window Gp-Cab
| 13***35 | Window Group-Cab | 1 |
| 13***94 | Rivet | 4 |
| 13***44 | Frame | 1 |
108-3191 Window Gp-Cab
| 10***91 | Window Group-Cab | 1 |
| 10***48 | Seal; (112cm) | 0 |
| 10***49 | Glass-Sliding | 1 |
137-8148 Window Gp-Cab
| 13***47 | Seal-Window | 1 |
| 13***48 | Window Group-Cab | 1 |
| 13***49 | Glass-Sliding | 1 |
132-8433 Window Gp-Front
| 12***41 | Seal; (713cm) | 0 |
| 13***30 | Frame As-Front | 1 |
| 13***33 | Window Group-Front | 1 |
8y-6949 Window Gp-Front
| 10***47 | Screw; (1/4x14x1-In) | 80 |
| 10***56 | Seal | 0 |
| 11***31 | Seal; (713cm) | 0 |
8y-6951 Window Gp-Rear
| 10***58 | Nut; (10x32-mm) | 4 |
| 10***51 | Post | 1 |
| 10***52 | Glass-Fixed | 1 |
132-8480 Window Gp-Rear
| 13***80 | Window Group-Rear | 1 |
| 13***50 | Glass-Sliding | 1 |
| 13***51 | Glass-Cab; (Fixed) | 1 |
6i-7141 Wiper & Washer Gp-Window
| 3F***56 | Lockwasher; (8.43x15.5x0.76mm Thk) | 3 |
| 4D***12 | Grommet (Top Of Dash) | 2 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 4 |
Power Train
112-1392 Brake Gp-Parking
| 10***20 | Ring-Retaining | 1 |
| 10***22 | Ring-Retaining | 1 |
| 10***41 | Plug | 4 |
164-0832 Coupling Gp-Torsional
| 15***43 | Coupling As | 1 |
| 16***26 | Fitting-Grease; (Torsional Coupling) | 1 |
| 16***32 | Coupling Group-Torsional | 1 |
129-4860 Coupling Gp-Torsional
| 11***63 | Coupling As | 1 |
| 12***30 | Hub As | 1 |
| 12***60 | Coupling Group-Torsional | 1 |
6i-7672 Coupling Gp-Torsional
| 09***07 | Bolt; (M16x2x120-mm) | 1 |
| 2R***09 | Washer-Flat | 12 |
| 3E***81 | Coupling As | 1 |
108-2720 Fastener Gp-Final Drive & Mtr
| 10***20 | Fastener Group-Final Drive & Mtr | 1 |
| 3E***32 | Bolt; (M30x3.5x200-mm) | 46 |
| 6I***81 | Washer; (12mm Thk)(Marked Z) | 46 |
6i-7521 Final Drive Gp
| 09***55 | Bolt; (Socket Head) | 4 |
| 09***82 | Ball Bearing | 2 |
| 10***62 | Bolt; (M16x2x85-mm) | 16 |
6i-7549 Sprocket Gp
| 10***05 | Bolt | 46 |
| 13***83 | Sprocket | 1 |
| 6I***81 | Washer; (12mm Thk)(Marked Z) | 46 |
Service Equipment And Supplies
6i-7164 Box Gp-Tool
| 5P***00 | Key Total 2 Pieces Per Unit; (Literature Compartment) | 1 |
| 5P***02 | Padlock Group; (Includes: Battery Compartments, Platform Compartments, Radiator Access Door, Firewall Doors) | 1 |
| 6I***64 | Box Group-Tool | 1 |
174-0205 Connection Gp-Test -Service Tool
| 17***05 | Connection Group-Test; -Service Tool | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 8 |
| 6V***65 | Fitting; (Quick Disconnect)(Transmission Oil) | 8 |
100-5623 Film Gp -Cab
| 10***23 | Film Group; -Cab | 1 |
| 10***32 | Plate-Warning; (Guard) | 1 |
| 10***65 | Film-Instruction; (Service Tool)(Service Tool) | 1 |
185-1824 Film Gp -Mass Excavator Stick
| 18***24 | Film Group; -Mass Excavator Stick | 1 |
| 7X***29 | Film; (Lift And Tie Down) (W/O Ripper: On Side Of Track Roller Frame Between Front Roller And Idler And Between Rear Roller And Idler (2 Each Side)) (W Ripper: On Side Of Track Roller Frame Between Front Roller And Idler And On Side Of Lower Ripper Frame By Rea | 3 |
185-1814 Film Gp -Bucket
| 18***14 | Film Group; -Bucket | 1 |
| 7X***29 | Film; (Lift And Tie Down) (W/O Ripper: On Side Of Track Roller Frame Between Front Roller And Idler And Between Rear Roller And Idler (2 Each Side)) (W Ripper: On Side Of Track Roller Frame Between Front Roller And Idler And On Side Of Lower Ripper Frame By Rea | 6 |
| 7X***44 | Film; (Instruction) (Tie Down) (To Front Tie Down Eyes) | 4 |
185-1821 Film Gp -Front Shovel Boom
| 18***21 | Film Group; -Front Shovel Boom | 1 |
| 7X***29 | Film; (Lift And Tie Down) (W/O Ripper: On Side Of Track Roller Frame Between Front Roller And Idler And Between Rear Roller And Idler (2 Each Side)) (W Ripper: On Side Of Track Roller Frame Between Front Roller And Idler And On Side Of Lower Ripper Frame By Rea | 4 |
112-2145 Film Gp -Machine
| 11***45 | Film Group; -Machine | 1 |
| 11***91 | Film | 2 |
| 11***92 | Film-Identification; (Cat) | 2 |
5p-8502 Padlock Gp
| 5P***00 | Key Total 2 Pieces Per Unit; (Literature Compartment) | 1 |
| 5P***02 | Padlock Group; (Includes: Battery Compartments, Platform Compartments, Radiator Access Door, Firewall Doors) | 1 |
| 8Y***64 | Sleeve (Not Part Of This Group) | 1 |
147-7730 Plate & Film Gp -Portuguese Cab
| 10***13 | Film-Instruction; (Telemetry) | 1 |
| 10***23 | Film-Instruction; (Service Tool) | 1 |
| 11***35 | Plate-Warning; (Guard) | 1 |
112-2124 Plate & Film Gp -Greek Cab
| 10***17 | Film-Instruction; (Telemetry) | 1 |
| 10***27 | Film-Instruction; (Service Tool) | 1 |
| 10***67 | Film-Instruction; (Hydraulic Backup) | 1 |
149-2815 Plate & Film Gp -Swedish Cab
| 10***62 | Film-Warning; (Clearance) | 1 |
| 10***63 | Film-Warning; (Engine Speed Control) | 1 |
| 10***20 | Film-Instruction; (Telemetry) | 1 |
114-5217 Plate & Film Gp -German
| 10***39 | Film-Warning; (Cable Connection) | 1 |
| 10***40 | Film-Warning; (Elec Shock Hazard, Unit Inj) | 3 |
| 10***81 | Film-Warning; (Hydraulic Tank Relief Valve) | 1 |
114-1115 Plate & Film Gp -Spanish
| 10***37 | Film-Warning; (Jumper Cable Use) | 1 |
| 10***38 | Film-Warning; (Unit Injector) | 3 |
| 10***79 | Film-Warning; (Hydraulic Tank Relief Valve) | 1 |
102-9939 Plate & Film Gp
| 10***39 | Plate & Film Group | 1 |
| 3N***90 | Plate Serial Number; On R.H. Rear Bank Of Cylinder Block As Viewed From Rear Of Engine | 1 |
| 7B***28 | Drive Screws-2 Required For Installing | 2 |
112-2127 Plate & Film Gp -Swedish Cab
| 10***62 | Film-Warning; (Clearance) | 1 |
| 10***63 | Film-Warning; (Engine Speed Control) | 1 |
| 10***20 | Film-Instruction; (Telemetry) | 1 |
114-1114 Plate & Film Gp -French
| 10***36 | Film-Warning; (Cable Connection) | 1 |
| 10***37 | Film-Warning; (Electrical Shock Hazard) | 3 |
| 10***78 | Film-Warning; (Hydraulic Tank Relief Valve) | 1 |
123-9835 Plate & Film Gp -Russian Cab
| 11***80 | Film-Warning; (Clearance) | 1 |
| 11***81 | Film-Warning; (Engine Speed Control) | 1 |
| 12***35 | Plate & Film Group; -Russian Cab | 1 |
152-6537 Plate & Film Gp -Indonesia Cab
| 15***30 | Plate-Warning; (Guard) | 1 |
| 15***31 | Film-Warning; (Clearance) | 1 |
| 15***32 | Film-Warning; (Travel Control) | 1 |
147-7723 Plate & Film Gp -French Cab
| 10***11 | Film-Instruction; (Telemetry) | 1 |
| 10***21 | Film-Instruction; (Service Tool) | 1 |
| 11***33 | Plate-Warning; (Guard) | 1 |
114-5218 Plate & Film Gp -Italian
| 10***40 | Film-Warning; (Cable Connection) | 1 |
| 10***41 | Film-Warning; (Elec Shock Hazard, Unit Inj) | 3 |
| 10***82 | Film-Warning; (Hydraulic Tank Relief Valve) | 1 |
114-5219 Plate & Film Gp -Danish
| 10***41 | Film-Warning; (Cable Connection) | 1 |
| 10***42 | Film-Warning; (Elec Shock Hazard, Danish) | 3 |
| 10***83 | Film-Warning; (Hydraulic Tank Relief Valve) | 1 |
114-1116 Plate & Film Gp -Portuguese
| 10***38 | Film-Warning; (Cable Connection) | 1 |
| 10***39 | Film-Warning; (Elec Shock Hazard, Unit Inj) | 3 |
| 10***80 | Film-Warning; (Hydraulic Tank Relief Valve) | 1 |
111-3739 Plate & Film Gp -Spanish Cab
| 10***75 | Film-Instruction; (Hydraulic Back-Up) | 1 |
| 10***12 | Film-Instruction; (Telemetry) | 1 |
| 10***22 | Film-Instruction; (Service Tool) | 1 |
114-0037 Plate & Film Gp -English
| 10***35 | Film-Warning; (Cable Connection) | 1 |
| 10***08 | Film-Information; (Engine Oil)(Install On Oil Filter Cap) | 1 |
| 10***63 | Film-Warning; (Hydraulic Tank Relief Valve) | 1 |
111-3742 Plate & Film Gp -Italian Cab
| 10***15 | Film-Instruction; (Telemetry) | 1 |
| 10***25 | Film-Instruction; (Service Tool) | 1 |
| 10***65 | Film-Instruction; (Hydraulic Backup) | 1 |
147-7720 Plate & Film Gp -English Cab
| 10***32 | Plate-Warning; (Guard) | 1 |
| 10***65 | Film-Instruction; (Service Tool)(Service Tool) | 1 |
| 10***66 | Film-Instruction; (Telemetry)(Telemetry) | 1 |
147-7728 Plate & Film Gp -Japanese Cab
| 10***19 | Film-Instruction; (Telemetry) | 1 |
| 10***29 | Film-Instruction; (Service Tool) | 1 |
| 11***30 | Film-Warning; (Engine Speed Control) | 1 |
111-7943 Plate & Film Gp -Cab
| 10***29 | Film-Instruction; (Machine Control) | 1 |
| 10***54 | Film-Instruction; (Lever Lock) | 1 |
| 10***00 | Film-Window; (Sun Visor)(Caterpillar) | 1 |
147-7729 Plate & Film Gp -Russian Cab
| 11***80 | Film-Warning; (Clearance) | 1 |
| 11***81 | Film-Warning; (Engine Speed Control) | 1 |
| 12***37 | Plate-Warning; (Guard) | 1 |
114-5223 Plate & Film Gp -Swedish
| 10***46 | Film-Warning; (Cable Connection) | 1 |
| 10***48 | Film-Warning; (Elec Shock Hazard, Unit Inj) | 3 |
| 10***87 | Film-Warning; (Hydraulic Tank Relief Valve) | 1 |
152-6528 Plate & Film Gp -Indonesia
| 15***93 | Film-Information; (Engine Oil)(Indonesian) | 1 |
| 15***94 | Film-Warning; (Crankcase-Indonesian) | 2 |
| 15***95 | Film-Warning; (Electrical Shock Hazard)(Indonesian) | 3 |
147-7722 Plate & Film Gp -Dutch Cab
| 10***18 | Film-Instruction; (Telemetry) | 1 |
| 10***28 | Film-Instruction; (Service Tool) | 1 |
| 11***40 | Plate-Warning; (Guard) | 1 |
147-7721 Plate & Film Gp -Danish Cab
| 10***16 | Film-Instruction; (Telemetry) | 1 |
| 10***26 | Film-Instruction; (Service Tool) | 1 |
| 11***38 | Plate-Warning; (Guard) | 1 |
114-5222 Plate & Film Gp -Japanese
| 10***44 | Film-Warning; (Cable Connection) | 1 |
| 10***45 | Film-Warning; (Unit Injector) | 3 |
| 10***86 | Film-Warning; (Hydraulic Tank Relief Valve) | 1 |
114-5220 Plate & Film Gp -Greek
| 10***42 | Film-Warning; (Cable Connection) | 1 |
| 10***43 | Film-Warning; (Unit Injector) | 3 |
| 10***84 | Film-Warning; (Hydraulic Tank Relief Valve) | 1 |
147-7727 Plate & Film Gp -Italian Cab
| 10***15 | Film-Instruction; (Telemetry) | 1 |
| 10***25 | Film-Instruction; (Service Tool) | 1 |
| 11***37 | Plate-Warning; (Guard) | 1 |
8c-5348 Plate & Film Gp
| 10***20 | Film-Instruction; (Ladder Lights)(Ladder Lights) | 1 |
| 10***62 | Film-Instruction; (Washer Fluid) | 1 |
| 10***68 | Film-Instruction; (Hydraulic Tank) | 1 |
111-3741 Plate & Film Gp -German Cab
| 10***14 | Film-Instruction; (Telemetry) | 1 |
| 10***24 | Film-Instruction; (Service Tool) | 1 |
| 10***42 | Film-Instruction; (Hydraulic Back-Up) | 1 |
147-7725 Plate & Film Gp -Greek Cab
| 10***17 | Film-Instruction; (Telemetry) | 1 |
| 10***27 | Film-Instruction; (Service Tool) | 1 |
| 11***39 | Plate-Warning; (Guard) | 1 |
123-9828 Plate & Film Gp -Russian
| 10***45 | Film-Warning; (Cable Connection) | 1 |
| 10***46 | Film-Warning; (Elec Shock Hazard, Unit Inj) | 3 |
| 11***67 | Film-Information; (Engine Oil) | 1 |
149-2814 Plate & Film Gp -Spanish Cab
| 10***12 | Film-Instruction; (Telemetry) | 1 |
| 10***22 | Film-Instruction; (Service Tool) | 1 |
| 11***34 | Plate-Warning; (Guard) | 1 |
114-5221 Plate & Film Gp -Dutch
| 10***43 | Film-Warning; (Cable Connection) | 1 |
| 10***44 | Film-Warning; (Elec Shock Hazard, Unit Inj) | 3 |
| 10***85 | Film-Warning; (Hydraulic Tank Relief Valve) | 1 |
111-3740 Plate & Film Gp -Portuguese Cab
| 10***76 | Film-Instruction; (Hydraulic Back-Up) | 1 |
| 10***13 | Film-Instruction; (Telemetry) | 1 |
| 10***23 | Film-Instruction; (Service Tool) | 1 |
112-2126 Plate & Film Gp -Japanese Cab
| 10***19 | Film-Instruction; (Telemetry) | 1 |
| 10***29 | Film-Instruction; (Service Tool) | 1 |
| 10***69 | Film-Instruction; (Hydraulic Backup) | 1 |
112-2125 Plate & Film Gp -Dutch Cab
| 10***18 | Film-Instruction; (Telemetry) | 1 |
| 10***28 | Film-Instruction; (Service Tool) | 1 |
| 10***68 | Film-Instruction; (Hydraulic Backup) | 1 |
147-7724 Plate & Film Gp -German Cab
| 10***14 | Film-Instruction; (Telemetry) | 1 |
| 10***24 | Film-Instruction; (Service Tool) | 1 |
| 11***36 | Plate-Warning; (Guard) | 1 |
111-3738 Plate & Film Gp -French Cab
| 10***74 | Film-Instruction; (Hydraulic Back-Up) | 1 |
| 10***11 | Film-Instruction; (Telemetry) | 1 |
| 10***21 | Film-Instruction; (Service Tool) | 1 |
111-3743 Plate & Film Gp -Danish Cab
| 10***16 | Film-Instruction; (Telemetry) | 1 |
| 10***26 | Film-Instruction; (Service Tool) | 1 |
| 10***66 | Film-Instruction; (Hydraulic Backup) | 1 |
Undercarriage
108-2719 Accumulator & Mounting Gp -Track Tension
| 10***44 | Diaphragm | 1 |
| 10***45 | Ring | 1 |
| 10***46 | Valve As | 1 |
108-2479 Carbody Ar
| 10***79 | Carbody Ar | 1 |
| 10***89 | Carbody Group | 1 |
| 10***92 | Gear & Bearing Group-Swing | 1 |
108-2489 Carbody Gp
| 10***90 | Bolt; (M36x4x130-mm) | 16 |
| 10***19 | Carbody As | 1 |
| 10***89 | Carbody Group | 1 |
6i-7691 Fastener Gp-Roller Frame
| 10***06 | Bolt; (M30x3.5x150-mm) | 4 |
| 13***28 | Spacer; (30-mm Thk) | 4 |
| 3E***32 | Bolt; (M30x3.5x200-mm) | 72 |
108-2721 Frame Gp-Track Roller -Lh
| 10***21 | Frame Group-Track Roller; -Lh | 1 |
| 13***45 | Cover | 1 |
| 13***46 | Cover As | 1 |
108-2728 Frame Gp-Track Roller -Rh
| 10***28 | Frame Group-Track Roller; -Rh | 1 |
| 13***45 | Cover | 1 |
| 13***46 | Cover As | 1 |
108-2715 Guard Gp-Travel Motor
| 10***15 | Guard Group-Travel Motor | 1 |
| 11***26 | Guard As | 1 |
| 11***27 | Guard As | 1 |
136-8879 Hook Gp-Front Pull
| 13***79 | Hook Group-Front Pull | 1 |
6i-7545 Idler Gp-Front
| 5T***53 | Spacer; (17x32x49-mm Thk) | 3 |
| 6E***06 | Cylinder Group-Track Tension | 1 |
| 6I***45 | Idler Group-Front | 1 |
6i-7552 Idler Gp-Front
| 1S***47 | Seal 17.17 mm. (.676 In.) I.D. | 1 |
| 2P***47 | Plug,Machine Thread | 1 |
| 3E***32 | Bolt; (M30x3.5x200-mm) | 4 |
6i-7547 Roller Gp-Track Carrier -Top
| 11***00 | Shaft | 1 |
| 11***01 | Collar | 2 |
| 11***02 | Roller As | 1 |
142-4411 Roller Gp-Track-Single Flange -Bottom
| 11***05 | Pin | 1 |
| 11***12 | Ring | 2 |
| 14***11 | Roller Group-Track-Single Flange; -Bottom | 1 |
155-4107 Roller Gp-Track-Single Flange -Bottom
| 11***05 | Pin | 1 |
| 11***12 | Ring | 2 |
| 15***07 | Roller Group-Track-Single Flange; -Bottom | 1 |
6i-7548 Roller Gp-Track-Single Flange -Bottom
| 11***05 | Pin | 1 |
| 11***06 | Shaft | 1 |
| 11***07 | Collar | 2 |
150-0394 Track Gp
| 10***36 | Ring-Retaining | 10 |
| 11***18 | Pin | 10 |
| 11***19 | Plate | 10 |
108-8171 Track Gp
| 10***36 | Ring-Retaining | 188 |
| 10***71 | Track Group | 1 |
| 11***18 | Pin | 188 |
112-1058 Track Gp
| 10***36 | Ring-Retaining | 188 |
| 11***18 | Pin | 188 |
| 11***19 | Plate | 188 |
130-6215 Track Gp
| 10***36 | Ring-Retaining | 188 |
| 11***18 | Pin | 188 |
| 11***19 | Plate | 188 |
150-0392 Track Gp
| 11***18 | Pin | 10 |
| 15***92 | Track Group | 1 |
| 17***29 | Plate | 10 |
122-1805 Track Gp
| 10***36 | Ring-Retaining | 188 |
| 11***18 | Pin | 188 |
| 11***19 | Plate | 188 |
150-0396 Track Gp
| 10***36 | Ring-Retaining | 10 |
| 11***18 | Pin | 10 |
| 11***19 | Plate | 10 |
122-1804 Track Gp
| 10***36 | Ring-Retaining | 188 |
| 11***18 | Pin | 188 |
| 11***19 | Plate | 188 |
118-6227 Track Gp
| 10***36 | Ring-Retaining | 188 |
| 11***18 | Pin | 188 |
| 11***19 | Plate | 188 |
Work Tools
132-4780 Adapter-Nose
| 13***80 | Adapter-Nose | 1 |
132-1104 Adapter-Nose
| 13***04 | Adapter-Nose | 1 |
138-0050 Base-Wear Plate
| 13***50 | Base-Wear Plate | 1 |
138-0052 Base-Wear Plate
| 13***52 | Base-Wear Plate | 1 |
142-4486 Bowl & Bearing As-Bucket
| 13***60 | Bearing; (4) | 4 |
| 14***86 | Bowl & Bearing As-Bucket | 1 |
| 14***87 | Bowl As-Bucket | 1 |
142-3591 Bowl & Bearing As-Bucket -Front Shovel
| 13***60 | Bearing; (4) | 4 |
| 14***91 | Bowl & Bearing As-Bucket; -Front Shovel | 1 |
| 14***92 | Bowl As-Bucket; -Front Shovel | 1 |
138-5926 Bowl & Bearing As-Bucket
| 13***60 | Bearing; (4) | 4 |
| 13***26 | Bowl & Bearing As-Bucket | 1 |
| 13***36 | Bowl As-Bucket | 1 |
142-3613 Bowl & Bearing As-Bucket -Front Shovel
| 13***60 | Bearing; (4) | 4 |
| 14***12 | Bowl As-Bucket; -Front Shovel | 1 |
| 14***13 | Bowl & Bearing As-Bucket; -Front Shovel | 1 |
128-6038 Bowl & Bearing As-Bucket
| 12***38 | Bowl & Bearing As-Bucket | 1 |
| 12***39 | Plate Group-Wear | 1 |
| 12***46 | Bowl As-Bucket | 1 |
138-7037 Bowl & Bearing As-Bucket
| 12***41 | Plate Group-Wear | 1 |
| 13***60 | Bearing; (4) | 4 |
| 13***37 | Bowl & Bearing As-Bucket | 1 |
125-7777 Bowl & Bearing As-Bucket
| 12***37 | Bowl As-Bucket | 1 |
| 12***77 | Bowl & Bearing As-Bucket | 1 |
| 12***41 | Plate Group-Wear | 1 |
142-3451 Bowl & Bearing As-Bucket
| 13***60 | Bearing; (4) | 4 |
| 14***51 | Bowl & Bearing As-Bucket | 1 |
| 14***52 | Bowl As-Bucket | 1 |
132-2852 Bowl & Bearing As-Bucket
| 13***52 | Bowl & Bearing As-Bucket | 1 |
| 13***53 | Bowl As-Bucket | 1 |
| 13***54 | Plate Group-Wear | 1 |
140-8355 Bowl & Bearing As-Bucket
| 13***60 | Bearing; (4) | 4 |
| 13***36 | Bowl As-Bucket | 1 |
| 14***55 | Bowl & Bearing As-Bucket | 1 |
157-4001 Bowl & Bearing As-Bucket -Front Shovel
| 13***60 | Bearing; (4) | 4 |
| 15***01 | Bowl & Bearing As-Bucket; -Front Shovel | 1 |
| 15***02 | Bowl As-Bucket; -Front Shovel | 1 |
133-1767 Bowl Ar-Spare
| 10***89 | Protector Group-Edge; -Front Shovel | 1 |
| 12***08 | Protector Group-Side Bar; -Front Shovel | 1 |
| 12***77 | Bowl & Bearing As-Bucket | 1 |
142-4515 Bowl Ar-Spare -Front Shovel
| 12***05 | Protector Group-Edge | 1 |
| 12***08 | Protector Group-Side Bar; -Front Shovel | 1 |
| 14***15 | Bowl Ar-Spare; -Front Shovel | 1 |
142-3593 Bowl Ar-Spare -Front Shovel
| 10***89 | Protector Group-Edge; -Front Shovel | 1 |
| 12***08 | Protector Group-Side Bar; -Front Shovel | 1 |
| 14***91 | Bowl & Bearing As-Bucket; -Front Shovel | 1 |
134-9916 Bowl Ar-Spare
| 10***89 | Protector Group-Edge; -Front Shovel | 1 |
| 12***08 | Protector Group-Side Bar; -Front Shovel | 1 |
| 13***52 | Bowl & Bearing As-Bucket | 1 |
142-3615 Bowl Ar-Spare -Front Shovel
| 10***89 | Protector Group-Edge; -Front Shovel | 1 |
| 12***08 | Protector Group-Side Bar; -Front Shovel | 1 |
| 14***13 | Bowl & Bearing As-Bucket; -Front Shovel | 1 |
132-2853 Bowl As-Bucket
| 10***11 | Plate-Wear | 1 |
| 11***58 | Plate | 1 |
| 12***88 | Bar; (60mm Thk) | 2 |
119-4450 Bowl As-Bucket
| 10***01 | Bearing | 4 |
| 10***88 | Lug-Mounting | 5 |
| 10***11 | Plate-Wear | 1 |
138-5936 Bowl As-Bucket
| 11***58 | Plate | 1 |
| 12***98 | Plate-Wear | 1 |
| 12***50 | Bar-Side | 2 |
128-6046 Bowl As-Bucket
| 10***88 | Lug-Mounting | 4 |
| 10***04 | Adapter-Center | 3 |
| 12***98 | Plate-Wear | 1 |
142-4487 Bowl As-Bucket
| 10***11 | Plate-Wear | 1 |
| 11***58 | Plate | 1 |
| 12***89 | Plate | 2 |
157-4002 Bowl As-Bucket -Front Shovel
| 11***74 | Plate | 1 |
| 13***07 | Plate-Wear; (Arm) | 18 |
| 13***05 | Edge Group-Cutting; -Front Shovel | 1 |
142-3612 Bowl As-Bucket -Front Shovel
| 11***74 | Plate | 1 |
| 13***07 | Plate-Wear; (Arm) | 16 |
| 13***76 | Edge Group-Cutting; -Front Shovel | 1 |
138-7039 Bowl As-Bucket
| 10***11 | Plate-Wear | 1 |
| 11***58 | Plate | 1 |
| 11***00 | Edge As-Base | 1 |
142-3452 Bowl As-Bucket
| 10***88 | Lug-Mounting | 5 |
| 10***11 | Plate-Wear | 1 |
| 10***04 | Adapter-Center | 4 |
124-2837 Bowl As-Bucket
| 10***88 | Lug-Mounting | 5 |
| 10***11 | Plate-Wear | 1 |
| 10***04 | Adapter-Center | 4 |
142-3592 Bowl As-Bucket -Front Shovel
| 10***88 | Lug-Mounting | 5 |
| 10***04 | Adapter-Center | 4 |
| 11***74 | Plate | 1 |
108-5775 Bowl As-Bucket
| 10***88 | Lug-Mounting | 5 |
| 10***75 | Bowl As-Bucket | 1 |
| 10***11 | Plate-Wear | 1 |
137-4441 Bucket & Bearing As -Mass Excavator
| 11***22 | Bearing; (220.51-mm Id) | 2 |
| 11***76 | Bearing; (180.323-mm Id)(180.32mm Id) | 2 |
| 13***41 | Bucket & Bearing As; -Mass Excavator | 1 |
157-4161 Bucket & Bearing As -Mass Excavator
| 11***22 | Bearing; (220.51-mm Id) | 2 |
| 11***76 | Bearing; (180.323-mm Id)(180.32mm Id) | 2 |
| 15***61 | Bucket & Bearing As; -Mass Excavator | 1 |
142-3488 Bucket & Bearing As -Mass Excavator
| 11***22 | Bearing; (220.51-mm Id) | 2 |
| 11***76 | Bearing; (180.323-mm Id)(180.32mm Id) | 2 |
| 14***88 | Bucket & Bearing As; -Mass Excavator | 1 |
116-3930 Bucket & Bearing As
| 10***84 | Adapter-Center | 4 |
| 10***85 | Adapter-Tip | 1 |
| 10***86 | Adapter-Tip | 1 |
115-5480 Bucket & Bearing As
| 10***80 | Edge As-Base | 1 |
| 10***85 | Adapter-Tip | 1 |
| 10***86 | Adapter-Tip | 1 |
129-7592 Bucket & Bearing As
| 11***22 | Bearing; (220.51-mm Id) | 2 |
| 11***76 | Bearing; (180.323-mm Id)(180.32mm Id) | 2 |
| 12***92 | Bucket & Bearing As | 1 |
123-6110 Bucket & Bearing As
| 11***22 | Bearing; (220.51-mm Id) | 2 |
| 11***76 | Bearing; (180.323-mm Id)(180.32mm Id) | 2 |
| 12***10 | Bucket & Bearing As | 1 |
125-1998 Bucket & Bearing As -Mass Excavator
| 10***84 | Adapter-Tip | 9 |
| 11***22 | Bearing; (220.51-mm Id) | 2 |
| 11***76 | Bearing; (180.323-mm Id)(180.32mm Id) | 2 |
138-2500 Bucket & Bearing As
| 11***22 | Bearing; (220.51-mm Id) | 2 |
| 11***76 | Bearing; (180.323-mm Id)(180.32mm Id) | 2 |
| 13***00 | Bucket & Bearing As | 1 |
122-4981 Bucket & Bearing As
| 11***22 | Bearing; (220.51-mm Id) | 2 |
| 11***76 | Bearing; (180.323-mm Id)(180.32mm Id) | 2 |
| 12***81 | Bucket & Bearing As | 1 |
178-2420 Bucket & Bearing As -Mass Excavator
| 11***22 | Bearing; (220.51-mm Id) | 2 |
| 11***76 | Bearing; (180.323-mm Id)(180.32mm Id) | 2 |
| 17***20 | Bucket & Bearing As; -Mass Excavator | 1 |
142-3590 Bucket Ar-Front Shovel
| 10***17 | Lubrication Group-Automatic; -Front Shovel-Bucket | 1 |
| 10***89 | Protector Group-Edge; -Front Shovel | 1 |
| 10***72 | Cylinder & Mtg Group-Bucket; -Front Shovel Bottom Dump | 1 |
157-4000 Bucket Ar-Front Shovel
| 10***72 | Cylinder & Mtg Group-Bucket; -Front Shovel Bottom Dump | 1 |
| 11***51 | Pin Group-Excavator; -Front Shovel Bottom Dump | 1 |
| 12***05 | Protector Group-Edge | 1 |
142-3614 Bucket Ar-Front Shovel -Bottom Dump
| 10***17 | Lubrication Group-Automatic; -Front Shovel-Bucket | 1 |
| 10***89 | Protector Group-Edge; -Front Shovel | 1 |
| 10***72 | Cylinder & Mtg Group-Bucket; -Front Shovel Bottom Dump | 1 |
108-8166 Bucket Ar-Front Shovel -Bottom Dump
| 10***17 | Lubrication Group-Automatic; -Front Shovel-Bucket | 1 |
| 10***89 | Protector Group-Edge; -Front Shovel | 1 |
| 10***90 | Protector Group-Side Bar | 1 |
130-5178 Bucket Ar-Front Shovel
| 10***17 | Lubrication Group-Automatic; -Front Shovel-Bucket | 1 |
| 10***89 | Protector Group-Edge; -Front Shovel | 1 |
| 10***72 | Cylinder & Mtg Group-Bucket; -Front Shovel Bottom Dump | 1 |
124-5721 Bucket Ar-Front Shovel
| 10***17 | Lubrication Group-Automatic; -Front Shovel-Bucket | 1 |
| 10***89 | Protector Group-Edge; -Front Shovel | 1 |
| 10***90 | Protector Group-Side Bar | 1 |
142-4485 Bucket Ar-Front Shovel -Bottom Dump
| 10***17 | Lubrication Group-Automatic; -Front Shovel-Bucket | 1 |
| 10***89 | Protector Group-Edge; -Front Shovel | 1 |
| 10***72 | Cylinder & Mtg Group-Bucket; -Front Shovel Bottom Dump | 1 |
140-8354 Bucket Ar-Front Shovel
| 10***72 | Cylinder & Mtg Group-Bucket; -Front Shovel Bottom Dump | 1 |
| 11***51 | Pin Group-Excavator; -Front Shovel Bottom Dump | 1 |
| 12***05 | Protector Group-Edge | 1 |
142-3450 Bucket Ar-Front Shovel
| 10***17 | Lubrication Group-Automatic; -Front Shovel-Bucket | 1 |
| 10***89 | Protector Group-Edge; -Front Shovel | 1 |
| 10***72 | Cylinder & Mtg Group-Bucket; -Front Shovel Bottom Dump | 1 |
138-5922 Bucket Ar-Front Shovel
| 10***90 | Protector Group-Side Bar | 1 |
| 10***72 | Cylinder & Mtg Group-Bucket; -Front Shovel Bottom Dump | 1 |
| 11***16 | Bearing; (240.50mm Id) | 2 |
128-6033 Bucket Ar-Front Shovel
| 10***90 | Protector Group-Side Bar | 1 |
| 10***72 | Cylinder & Mtg Group-Bucket; -Front Shovel Bottom Dump | 1 |
| 11***51 | Pin Group-Excavator; -Front Shovel Bottom Dump | 1 |
129-7591 Bucket Ar-Mass Excavator
| 12***05 | Protector Group-Edge | 1 |
| 12***06 | Protector Group-Side Bar; -Mass Excavator | 1 |
| 12***91 | Bucket Ar-Mass Excavator | 1 |
117-9891 Bucket Ar-Mass Excavator
| 10***82 | Protector Group-Edge | 1 |
| 11***30 | Bucket & Bearing As | 1 |
| 11***91 | Bucket Ar-Mass Excavator | 1 |
142-3487 Bucket Ar-Mass Excavator
| 12***05 | Protector Group-Edge | 1 |
| 12***06 | Protector Group-Side Bar; -Mass Excavator | 1 |
| 14***87 | Bucket Ar-Mass Excavator | 1 |
157-4160 Bucket Ar-Mass Excavator
| 12***05 | Protector Group-Edge | 1 |
| 12***06 | Protector Group-Side Bar; -Mass Excavator | 1 |
| 15***60 | Bucket Ar-Mass Excavator | 1 |
122-4980 Bucket Ar-Mass Excavator
| 12***80 | Bucket Ar-Mass Excavator | 1 |
| 12***81 | Bucket & Bearing As | 1 |
| 12***05 | Protector Group-Edge | 1 |
138-2499 Bucket Ar-Mass Excavator
| 12***06 | Protector Group-Side Bar; -Mass Excavator | 1 |
| 13***99 | Bucket Ar-Mass Excavator | 1 |
| 13***00 | Bucket & Bearing As | 1 |
123-6107 Bucket Ar-Mass Excavator
| 12***07 | Bucket Ar-Mass Excavator | 1 |
| 12***10 | Bucket & Bearing As | 1 |
| 12***06 | Protector Group-Side Bar; -Mass Excavator | 1 |
137-4439 Bucket Ar-Mass Excavator
| 12***05 | Protector Group-Edge | 1 |
| 12***06 | Protector Group-Side Bar; -Mass Excavator | 1 |
| 12***37 | Protector Group-Bucket | 1 |
142-3489 Bucket As-Mass Excavator
| 10***88 | Lug-Mounting | 4 |
| 10***04 | Adapter-Center | 5 |
| 11***58 | Plate | 1 |
123-6111 Bucket As-Mass Excavator
| 11***89 | Plate Group-Wear | 1 |
| 12***11 | Bucket As-Mass Excavator | 1 |
| 12***12 | Bucket As-Mass Excavator | 1 |
138-2501 Bucket As-Mass Excavator
| 12***31 | Plate Group-Wear | 1 |
| 13***01 | Bucket As-Mass Excavator | 1 |
| 13***02 | Bucket As-Mass Excavator | 1 |
122-4982 Bucket As-Mass Excavator
| 12***82 | Bucket As-Mass Excavator | 1 |
| 12***31 | Plate Group-Wear | 1 |
| 12***82 | Bucket As-Mass Excavator | 1 |
129-7597 Bucket As-Mass Excavator
| 10***88 | Lug-Mounting | 4 |
| 10***04 | Adapter-Center | 5 |
| 11***58 | Plate | 1 |
137-4442 Bucket As-Mass Excavator
| 13***42 | Bucket As-Mass Excavator | 1 |
| 13***43 | Bucket As-Mass Excavator | 1 |
| 13***66 | Plate Group-Wear | 1 |
137-4443 Bucket As-Mass Excavator
| 10***88 | Lug-Mounting | 4 |
| 10***04 | Adapter-Center | 5 |
| 11***58 | Plate | 1 |
123-6112 Bucket As-Mass Excavator
| 10***88 | Lug-Mounting | 4 |
| 10***04 | Adapter-Center | 5 |
| 11***53 | Hinge As | 1 |
122-1082 Bucket As-Mass Excavator
| 10***88 | Lug-Mounting | 4 |
| 10***04 | Adapter-Center | 5 |
| 12***82 | Bucket As-Mass Excavator | 1 |
138-2502 Bucket As-Mass Excavator
| 10***04 | Adapter-Center | 5 |
| 12***86 | Bar-Side | 2 |
| 13***02 | Bucket As-Mass Excavator | 1 |
188-1180 Bucket As-Mass Excavator
| 10***88 | Lug-Mounting | 4 |
| 10***04 | Adapter-Center | 5 |
| 11***85 | Plate | 4 |
129-7594 Bucket As-Mass Excavator
| 11***89 | Plate Group-Wear | 1 |
| 12***94 | Bucket As-Mass Excavator | 1 |
| 12***97 | Bucket As-Mass Excavator, Hydraulic Hose, Hydraulic Hose; Hose | 1 |
142-3490 Bucket As-Mass Excavator
| 10***88 | Lug-Mounting | 4 |
| 10***04 | Adapter-Center | 5 |
| 11***58 | Plate | 1 |
157-4162 Bucket As-Rock
| 10***88 | Lug-Mounting | 4 |
| 10***04 | Adapter-Center | 5 |
| 11***58 | Plate | 1 |
128-6058 Bulldozer & Bearing As -Front Shovel
| 10***02 | Bearing; (150.2-mm Id) | 4 |
| 11***16 | Bearing; (240.50mm Id) | 2 |
| 12***00 | Bulldozer As; -Front Shovel | 1 |
139-6798 Bulldozer & Bearing As
| 10***02 | Bearing; (150.2-mm Id) | 4 |
| 11***16 | Bearing; (240.50mm Id) | 2 |
| 12***00 | Bulldozer As; -Front Shovel | 1 |
119-4449 Bulldozer & Bearing As -Front Shovel
| 10***02 | Bearing; (150.2-mm Id) | 4 |
| 10***71 | Bulldozer As; -Front Shovel | 1 |
| 11***16 | Bearing; (240.50mm Id) | 2 |
140-8356 Bulldozer & Bearing As
| 10***02 | Bearing; (150.2-mm Id) | 4 |
| 11***16 | Bearing; (240.50mm Id) | 2 |
| 12***00 | Bulldozer As; -Front Shovel | 1 |
178-2401 Bulldozer As
| 17***00 | Bulldozer As | 1 |
| 17***01 | Bulldozer As | 1 |
108-5771 Bulldozer As -Front Shovel
| 10***71 | Bulldozer As; -Front Shovel | 1 |
| 11***21 | Guard As | 1 |
| 12***36 | Edge-Base | 1 |
123-1300 Bulldozer As -Front Shovel
| 12***00 | Bulldozer As; -Front Shovel | 1 |
| 12***02 | Edge-Base | 1 |
| 12***04 | Guard As-Spill | 1 |
178-2404 Bulldozer As
| 17***03 | Bulldozer As | 1 |
| 17***04 | Bulldozer As | 1 |
138-5943 Edge Gp-Cutting
| 10***88 | Lug-Mounting | 4 |
| 10***04 | Adapter-Center | 3 |
| 12***00 | Adapter-Corner | 2 |
136-1105 Edge Gp-Cutting -Front Shovel
| 10***88 | Lug-Mounting | 4 |
| 10***04 | Adapter-Center | 3 |
| 12***00 | Adapter-Corner | 2 |
132-1476 Edge Gp-Cutting -Front Shovel
| 10***88 | Lug-Mounting | 5 |
| 10***04 | Adapter-Center | 4 |
| 12***99 | Edge As-Base | 1 |
119-5997 Plate Gp-Wear
| 11***31 | Plate | 2 |
| 11***24 | Plate | 2 |
| 11***25 | Plate | 2 |
128-6060 Plate Gp-Wear -Front Shovel Bulldozer
| 11***13 | Plate | 2 |
| 11***14 | Plate | 2 |
| 11***15 | Plate | 14 |
138-5983 Plate Gp-Wear
| 13***77 | Block | 4 |
| 13***78 | Block | 4 |
| 13***83 | Plate Group-Wear | 1 |
138-5940 Plate Gp-Wear
| 12***42 | Plate | 1 |
| 12***43 | Plate | 18 |
| 12***44 | Plate | 1 |
119-5996 Plate Gp-Wear -Front Shovel Bulldozer
| 11***11 | Plate | 12 |
| 11***13 | Plate | 2 |
| 11***14 | Plate | 2 |
132-1490 Plate Gp-Wear -Front Shovel Edge
| 13***77 | Block | 4 |
| 13***78 | Block | 4 |
| 13***90 | Plate Group-Wear; -Front Shovel Edge | 1 |
136-1108 Plate Gp-Wear -Front Shovel Edge
| 13***77 | Block | 4 |
| 13***78 | Block | 4 |
| 13***53 | Plate | 4 |
132-2854 Plate Gp-Wear
| 11***11 | Plate | 2 |
| 11***19 | Plate | 10 |
| 11***25 | Plate | 2 |
139-6799 Plate Gp-Wear
| 11***13 | Plate | 2 |
| 11***14 | Plate | 2 |
| 11***15 | Plate | 14 |
117-9889 Plate Gp-Wear
| 11***89 | Plate Group-Wear | 1 |
| 11***84 | Plate | 2 |
| 11***85 | Plate | 2 |
126-4941 Plate Gp-Wear
| 11***31 | Plate | 2 |
| 11***25 | Plate | 2 |
| 11***27 | Plate | 1 |
142-4488 Plate Gp-Wear
| 13***07 | Plate-Wear; (Arm) | 18 |
| 14***88 | Plate Group-Wear | 1 |
| 14***93 | Plate-Wear | 2 |
122-4431 Plate Gp-Wear
| 11***88 | Plate | 30 |
| 11***89 | Plate | 15 |
| 12***31 | Plate Group-Wear | 1 |
136-6000 Plate Gp-Wear
| 12***68 | Plate-Wear Arm | 48 |
| 13***00 | Plate Group-Wear | 1 |
137-4466 Plate Gp-Wear
| 11***85 | Plate | 4 |
| 11***89 | Plate | 13 |
| 13***66 | Plate Group-Wear | 1 |
128-6039 Plate Gp-Wear
| 11***43 | Plate | 2 |
| 12***39 | Plate Group-Wear | 1 |
| 12***40 | Plate | 2 |
108-8168 Plate Gp-Wear
| 10***68 | Plate Group-Wear | 1 |
| 11***11 | Plate | 12 |
| 11***12 | Plate | 2 |
128-6037 Protector Gp-Bucket
| 10***05 | Protector-Rh | 2 |
| 10***06 | Protector-Lh | 2 |
| 11***08 | Pin-Flexible | 8 |
125-1107 Protector Gp-Bucket
| 12***07 | Protector Group-Bucket | 1 |
| 14***89 | Retainer As-G.E.T. | 8 |
| 14***03 | Bushing-Lug | 8 |
107-6282 Protector Gp-Edge
| 10***82 | Protector Group-Edge | 1 |
| 13***84 | Protector-Edge | 1 |
| 13***85 | Protector-Rh | 2 |
107-3289 Protector Gp-Edge -Front Shovel
| 10***89 | Protector Group-Edge; -Front Shovel | 1 |
| 14***89 | Retainer As-G.E.T. | 10 |
| 14***03 | Bushing-Lug | 10 |
125-1105 Protector Gp-Edge
| 12***05 | Protector Group-Edge | 1 |
| 14***89 | Retainer As-G.E.T. | 8 |
| 14***03 | Bushing-Lug | 8 |
125-1106 Protector Gp-Side Bar -Mass Excavator
| 12***06 | Protector Group-Side Bar; -Mass Excavator | 1 |
| 16***87 | Collar | 4 |
| 18***87 | Pin | 4 |
107-3290 Protector Gp-Side Bar
| 10***90 | Protector Group-Side Bar | 1 |
| 6I***56 | Protector | 2 |
| 6I***57 | Pin-Flexible | 2 |
125-1108 Protector Gp-Side Bar -Front Shovel
| 12***08 | Protector Group-Side Bar; -Front Shovel | 1 |
| 12***09 | Protector | 2 |
| 16***87 | Collar | 2 |
9u-9919 Protector Gp-Side Bar
| 6I***57 | Pin-Flexible | 2 |
| 9U***17 | Protector-Side Bar | 2 |
| 9U***19 | Protector Group-Side Bar | 1 |
138-0007 Retainer-G.E.T.
| 13***07 | Retainer-G.E.T. | 1 |
120-0101 Tip Gp-General Purpose
| 12***01 | Tip Group-General Purpose | 1 |
| 13***00 | Coupler-Tip | 1 |
| 13***02 | Tip-General Purpose | 1 |
6i-8686 Tip Gp-General Purpose
| 12***88 | Pin-Flexible | 1 |
| 12***89 | Sleeve-Retaining | 1 |
| 6I***86 | Tip Group-General Purpose | 1 |
113-4790 Tip Gp-General Purpose
| 10***82 | Tip-General Purpose | 1 |
| 11***90 | Tip Group-General Purpose | 1 |
| 13***88 | Pin-Flexible | 1 |
127-8567 Tip Gp-General Purpose
| 10***01 | Coupler-Tip A.R.M. | 1 |
| 10***03 | Tip-General Purpose A.R.M. | 1 |
| 12***67 | Tip Group-General Purpose | 1 |
253-0057 Tip Gp-Long
| 11***08 | Pin; (G.E.T.) | 1 |
| 11***09 | Retainer As; (G.E.T.) | 1 |
| 15***00 | Tip-Long | 1 |
143-3099 Tip Gp-Penetration
| 13***01 | Pin-G.E.T. | 1 |
| 14***89 | Retainer As-G.E.T. | 1 |
| 14***99 | Tip Group-Penetration | 1 |
109-2687 Tip Gp-Penetration
| 10***87 | Tip Group-Penetration | 1 |
| 11***89 | Tip-Penetration | 1 |
| 12***88 | Pin-Flexible | 1 |
124-8777 Tip Gp-Penetration
| 12***77 | Tip Group-Penetration | 1 |
| 12***89 | Tip-Penetration | 1 |
| 13***88 | Pin-Flexible | 1 |
131-0107 Tip Gp-Penetration
| 13***06 | Tip-Penetration | 1 |
| 13***07 | Tip Group-Penetration | 1 |
| 13***07 | Retainer As | 1 |
107-3292 Tip Gp-Short
| 10***92 | Tip Group-Short | 1 |
| 13***00 | Coupler-Tip | 1 |
| 13***01 | Tip-Short | 1 |
132-1105 Tip-Penetration
| 13***05 | Tip-Penetration | 1 |
3516 serial number reference
The 3516 serial/PIN plate is a riveted metal tag on the engine itself - typically on the left side of the block near the fuel injection pump/valve cover - or on the equipment's frame-mounted PIN plate near the operator station for packaged units like generator sets and locomotives. Read the first three characters as the alphanumeric prefix (identifies the specific model/configuration build, e.g. generator set engine, industrial engine, marine engine, gas engine), followed by a five-digit sequence number for that build; on post-2001 17-character PINs this same 8-character prefix-plus-sequence string sits at the end of the full PIN.
| Prefix | Identifies | Notes |
|---|---|---|
| 8TW, CAL, CMD, GZR, GZX, PTD, RKT | 3516 Generator Set (packaged genset) | Full diesel generator set package built on the base 3516 (V16, non-B/C) block. Ratings cluster around 1450-1750 kW at 60 Hz and roughly 1600-2000 kW at 50 Hz depending on build. Approximate build order runs 8TW (late 1990s) through CAL, then GZR/GZX/PTD/RKT/CMD (early-to-mid 2000s); exact cutover years vary by region - verify against the plate date or dealer records. |
| 25Z, 3JS | 3516 Gen Set Engine (bare engine, no genset package) | Standalone gen-set engine build - engine only, not the full enclosed generator package. Same non-B/C base 3516 block. |
| ZAL, 2TS, 4XF, 5SJ, 73Z, 7KM | 3516 Gen Set Engine (bare engine) | Additional gen-set engine build prefixes for the base 3516 (non-B/C) block, same family as 25Z/3JS. |
| 27Z, 71Z | 3516 Industrial Engine | Stationary industrial duty engine (pump drive, compressor drive and similar mechanical-drive applications), diesel, non-B/C base block. |
| 28Z | 3516 Vehicular Engine | Engine-only build for mobile/vehicular equipment applications rather than a stationary package. |
| 29Z, 72Z, 3SS, 4MJ | 3516 Marine Engine | Marine propulsion engine build of the base 3516, diesel. 29Z and 72Z share overlapping application coverage; 4MJ and 3SS are separate serial runs of the same marine build. |
| 9KF | 3516 Locomotive Engine | Locomotive/rail traction engine build of the base 3516, diesel. |
| 3RC, 4EK | G3516 Gas Engine | Spark-ignited natural gas version of the 3516 architecture (model marked G3516, not the diesel 3516), with its own fuel system and ignition. 3RC-prefix engines commonly show up as the turbocharged-aftercooled SITA configuration, still under the G3516 model designation. |
| 5PN, 8LD, 8PW, WPS, WPT, WPW | G3516 Gas Engine / G3516 Industrial Engine | Further G3516 natural-gas build prefixes; 8PW is marked specifically as G3516 Industrial Engine. WPW and WPS trace to their own dedicated service and operation/maintenance manual print runs from roughly the mid-2000s. |
| 2PK, 4RB, 54Z | 3516, mining/haul-truck machine engine (exact build class not documented) | These show up on 3516 engine cores pulled from mining haul trucks (789/793-series applications) rather than on standard generator/industrial/marine/vehicular engine-arrangement prefix references. Likely a machine-installed serial series rather than a standalone engine-sales prefix. Confirm exact configuration and fitment with a Cat dealer before ordering parts. |
Frequently asked questions
What engine does the Caterpillar 3516 use?
The 3516 is itself the engine, not a machine built around one - a Caterpillar 3500-series V16, four-stroke, turbocharged-aftercooled diesel with a 170 mm bore, 190 mm stroke, and roughly 69 L displacement. Depending on configuration it is rated from about 1011 to 1492 bkW (1355 to 2000 bhp) at 1200 to 1800 rpm for industrial duty, with generator set and marine builds carrying their own ratings for their duty cycle.
What is the operating weight of the Caterpillar 3516?
Bare engine dry weight is around 7,484 kg (16,499 lb). Land drilling and generator set packages add a generator, radiator, and mounting skid, pushing total package weight considerably higher - commonly from the high 8-tonne range into the mid-teens of tonnes or more. Weight varies by configuration, so confirm the exact figure against the build spec sheet for your unit.
What replaced the Caterpillar 3516?
Caterpillar kept the platform going through the 3516B, 3516C, and Tier 4-compliant 3516E updates, each adding tighter emissions control and updated electronics while keeping the same basic 69 L V16 architecture. For new Tier 4 Final builds, Caterpillar now points many customers to its higher-density C175 platform, which packs more power into a smaller footprint than the 3500 series.
What 3516 owners discuss
What generation/fuel-system quirks show up across the 3516 line?
Early-production 3516 engines used mechanical unit injection (MUI) with a gear-driven mechanical governor. The line was later revised to mechanical-electronic unit injection (MEUI): injectors are still cam/rocker-actuated, but fuel timing and quantity are set by the ECM instead of mechanical linkage. Owners who moved from an MUI unit to a later MEUI-equipped one report far fewer manual injector timing and calibration adjustments, but the changeover also brought a revised gear train, camshafts, cylinder liners, water pumps, and turbochargers, so components generally don't cross over between the two designs. The 3516 has a long production run with numerous product-improvement updates along the way (crankshaft counterweight reshaping for oil control, head gasket revisions, and others) - confirm which updates apply to a specific serial number before assuming a repair or part carries over.
What's the most common valve-train complaint on the 3516?
The recurring complaint, mostly from marine and genset operators, is intake valve recession running ahead of factory tolerance. Some report the upper intake valves needing a lash reset roughly every 1000 hours, tighter than the factory interval commonly cited around 1500-2000 hours, with measured recession in the 0.03-0.065 in (0.8-1.7 mm) range showing up by 4000-8000 hours, even on rebuilt heads. Caterpillar has held that this wear falls within tolerance, but field techs describe doing the adjustment more often on newer builds than on older ones. A smaller number of threads describe outright dropped valves. Have your dealer verify valve lash and head condition (borescope or compression check) rather than assuming a lash reset alone has resolved the issue.
What do owners say about turbo issues and oil consumption?
Owners commonly trace rising oil consumption and blue or white exhaust smoke to turbocharger seal wear, where oil crosses into the intake side or leaks past the turbine-side seal onto the exhaust manifold. Left unaddressed, enough oil pooling in a cylinder can hydrolock the engine on restart. The usual field check covers turbo shaft play, oil feed and return line condition, and the manifold/turbine housing for cracking or warping. Because a hydrolock event can bend a rod or crack a liner, have your dealer verify turbo and cylinder condition before returning the engine to service.
What wear pattern shows up in the cooling system?
On marine and genset installs, the raw-water pump impeller is typically the first component to wear, with owners servicing or replacing it roughly every 500 to 1,000 hours, while the jacket (fresh) water pump tends to run longer, more like 2000-3000 hours before it needs attention. Reported cases of unexplained high sump level or overheating have traced back to simple maintenance oversight - a valve left cracked open during an oil change, or off-spec replacement oil - about as often as to a failed pump. Before condemning a pump, check oil viscosity and water content by sample and confirm the valve line-up on the lube and cooling circuits.
What electrical or sensor faults come up most on the 3516?
On EMCP-controlled 3516 gensets, owners report intermittent shutdowns and fault codes tracing to the crankshaft position sensor, fuel pressure sensor, or general communication faults between control modules. The field fix pattern: check sensor wiring and connectors for corrosion, confirm a smooth analog signal sweep on the suspect sensor with a multimeter, and clean/reseat module connectors before swapping a sensor outright. Several threads note the fault code alone (module communication vs. sensor vs. wiring) doesn't pinpoint the cause without this manual check sequence.
How many hours can you realistically expect before an overhaul?
This varies widely by installation, duty cycle, and cooling configuration, so treat any single figure with caution. In mining-truck applications (789/793 haul trucks), reported overhaul intervals range from about 16,000-18,000 hours up to 20,000-24,000 hours, tracking cumulative fuel burned about as closely as hours run. Marine and genset service-life estimates trend lower per component - injector and turbo attention cited around 2000-3000 hours, head work around 4000-5000 hours, and some operators discussing a full overhaul nearer 10,000-12,000 hours - reflecting a different duty cycle and cooling setup than a mining truck. When judging remaining life, ask for oil-sample trend data and total fuel burned, not just the hour-meter reading.
What should you check when buying a used 3516?
Buyers commonly check: engine oil level and condition, plus filter and oil-change history with hours logged at the last service; coolant level, freeze protection, and hose condition, along with any paint discoloration or bubbling on covers/cowling suggesting past overheating; fuel hose and drive belt condition; battery age, count, and whether a charger is fitted; the exhaust manifold and turbo area for cracks, leaks, or oil staining; and a maintenance record tied to the specific serial number (including any product-improvement or bulletin history) rather than relying on the hour meter alone. Because a straight hour count can hide a hard duty cycle, cross-check it against an oil-analysis trend and, where available, the ECM's fault-code history before finalizing a purchase. Have your dealer verify overall mechanical condition (compression, valve lash, turbo shaft play) as part of any pre-purchase inspection.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Caterpillar 3516. Related factory variants of the same model family:
351635163516351635163516
Need a specific 3516 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.