Caterpillarengine - marinemarine auxiliary
Caterpillar 3508B
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 3508B is a high-speed, heavy-duty V-8 diesel engine built for marine auxiliary/genset and propulsion duty, not a complete vessel or driveline. It displaces 34.5 L (2105 cu in) from a 170 x 190 mm (6.7 x 7.5 in) bore and stroke, runs dual turbochargers with aftercooling, and pairs Caterpillar's ADEM II electronic governor with electronic unit injectors for fuel control and onboard monitoring. Dry engine weight runs roughly 4,880-5,220 kg (10,760-11,500 lb) depending on rating package, lighter on the high-performance propulsion build and heavier on the constant-speed auxiliary/generator-drive build. It followed the original mechanical 3508 and was itself succeeded by the 3508C. Caterpillar offered it as a marine auxiliary/generator set rated roughly 649-760 bkW and as a marine propulsion engine with a high-performance rating up to 1119 bkW (1500 bhp) at 1925 rpm for fast patrol craft and yachts, built in keel-cooled or heat-exchanger-cooled configurations with standard or reverse rotation.
The step up from the original 3508 was electronic: EUI injection and the ADEM II governor gave the 3508B tighter fuel control, real-time fault monitoring, and better fuel economy than the mechanical fuel-pump engine it replaced, while keeping the same block, 34.5 L displacement, and V-8 layout. The 3508C generation that followed added separate-circuit aftercooling and updated electronics to meet IMO II and EPA Tier 2 limits the 3508B was never built to hit. That gap is exactly why the 3508B still matters in the used and parts market today: it sits between fully mechanical 3500-series fleets and the tighter-emissions 3508C, giving owners of tugs, offshore supply boats, ferries, and standby gensets a well-understood, ADEM II-electronic engine with a deep global pool of turbochargers, injectors, cylinder packs, and aftercoolers to draw on for repower and overhaul work.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 3508B specifications
Engine
| Configuration | V-8, 4-stroke-cycle diesel, dual turbocharged-aftercooled. Offered as a constant-speed marine auxiliary (generator-drive) engine and as a marine propulsion engine. |
| Displacement | 34.5 L (2105 cu in) |
| Bore x Stroke | 170 mm x 190 mm (6.7 in x 7.5 in) |
| Compression ratio | 14.0:1 (propulsion rating; not separately published for the auxiliary rating) |
| Marine auxiliary (generator-drive) power ratings | 649 bkW (870 bhp) at 1000 rpm; 682 bkW (915 bhp) at 1200 rpm; 760 bkW (1019 bhp) at 1800 rpm |
| Marine propulsion power rating | High-performance (Ehp) curve topping out at 1119 bkW (1500 bhp) at 1925 rpm, for fast patrol craft and fast yachts running a low load factor. Zone-limit curve extends down to roughly 650 rpm. |
| Governor / engine management | Electronic governor. Propulsion rating uses dual Advanced Diesel Engine Management (ADEM II) modules with electronically controlled unit injectors and customer-programmable deration strategy. |
| Emissions | IMO compliant |
| Rotation | Counterclockwise from the flywheel end as standard; clockwise available as an option |
Weights
| Net dry weight, marine auxiliary rating | approx. 5216 kg (11,500 lb) - unchanged across the 649/682/760 bkW auxiliary ratings |
| Net dry weight, marine propulsion (high-performance) rating | approx. 4882 kg (10,763 lb) |
| Weight variance note | Weight differs by rating package, not by a mechanical revision. The auxiliary build carries a larger cooling circuit and heavier flywheel housing for generator duty; wet or shipping weight is not separately published on the factory sheets |
Dimensions
| Overall length, marine auxiliary rating | 2350 mm (92.5 in) |
| Overall width, marine auxiliary rating | 1703 mm (67.1 in) |
| Overall height, marine auxiliary rating | 1806 mm (71.1 in) |
| Overall length, marine propulsion (high-performance) rating | 2310 mm (90.9 in) |
| Overall width, marine propulsion (high-performance) rating | 1703 mm (67.0 in) |
| Overall height, marine propulsion (high-performance) rating | 1803 mm (70.9 in) |
| Flywheel housing | SAE No. 00 on the generator-drive auxiliary rating; SAE No. 0 on the propulsion rating |
| Mounting | Auxiliary rating: engine-length mounting rails with C-channel, 254 mm (10 in). Propulsion rating: front trunnion mount with rear pads at the flywheel housing |
Performance
| Duty profile | Auxiliary ratings run constant speed for generator drive. The propulsion high-performance (Ehp) rating is a variable-speed curve for fast patrol craft and fast yachts with a low load factor. |
| Peak propulsion rating point | 1119 bkW (1500 bhp) at 1925 rpm |
| Brake mean effective pressure, peak propulsion rating | 2021 kPa (293 psi) |
| Heat rejection to coolant, peak propulsion rating | 483 kW (27,468 Btu/min) |
| Heat rejection to aftercooler, peak propulsion rating | 385 kW (21,895 Btu/min) |
| Heat rejection to exhaust, peak propulsion rating | 907 kW (51,580 Btu/min) |
| Heat radiation to atmosphere from engine, peak propulsion rating | 114 kW (6483 Btu/min) |
| Fuel consumption, auxiliary 760 bkW rating at full load | 186.8 L/h (49.3 gph) |
| Fuel consumption, auxiliary 682 bkW rating at full load | 161.2 L/h (42.6 gph) |
Service capacities (summary)
| Cooling system (engine only), marine auxiliary rating | 285 L (75.3 US gal) |
| Lube oil system, marine auxiliary rating | 223 L (59 US gal); oil change interval 500 hours; Caterpillar DEO 10W30 or 15W40 |
| Cooling system (engine only), marine propulsion (high-performance) rating | 102.7 L (27.1 US gal) |
| Lube oil system refill, marine propulsion (high-performance) rating | 104 L (27 US gal); oil change interval 250 hours; minimum oil grade CF-4 |
| Fuel tank | Not part of the base engine package - sized and supplied at the vessel level, not published on the engine spec sheet |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
3508B fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (lube oil system, with filter) | 223 L (59 US gal) refill, standard sump oil pan. Same figure published across every Cat 3508B Marine Auxiliary / Marine Package Generator Set rating reviewed, from 649 bkW at 1000 rpm up to 968 bkW at 1800 rpm. A deep sump oil pan is offered as factory accessory equipment on the marine auxiliary line; its fill volume is not broken out on the standard spec sheets, so confirm actual dipstick full mark on deep-sump-equipped units before a first fill. | Caterpillar DEO (Diesel Engine Oil), SAE 10W30 or 15W40, minimum API CF-4 (CH-4 preferred grade). 500-hour oil and filter change interval at rated conditions. General Cat guidance favors 10W30 in cooler ambient ranges and 15W40 in hot climates or where fuel sulfur runs higher; check the engine-specific fluids table for the exact crossover ambient before switching grades, and confirm actual interval against duty cycle with S-O-S oil sampling. |
| Cooling system (jacket water, engine and expansion tank) | 285 L (75.3 US gal). Identical across all four Marine Auxiliary / Marine Package Generator Set rating sheets checked (600-970 bkW range), so this figure holds for the whole 3508B marine auxiliary lineup regardless of speed rating. | Water/glycol coolant built on a Cat-approved additive package. Cat ELC (Extended Life Coolant, organic-acid technology) needs no supplemental additive and supports long drain intervals; conventional coolant (Cat DEAC-type) needs a supplemental coolant additive (SCA) topped up on a running schedule to hold back corrosion, cavitation and scale, with periodic coolant sampling to confirm additive level. The engine uses a separate-circuit aftercooler as standard; its water volume is folded into the total above and isn't broken out separately on the factory sheet. Full-open thermostat opens at 92 degC (198 degF). |
| Fuel system | Not applicable. The 3508B ships as a bare marine engine or generator-set package with no integral fuel tank — fuel draws from a ship-supplied day tank or service tank sized by the vessel builder. | Distillate diesel fuel meeting Caterpillar's standard diesel fuel specification (reference fuel for rating purposes is 35 degree API gravity, LHV 42,780 kJ/kg). Match actual fuel sulfur content against the oil-drain guidance in the crankcase row above — higher sulfur fuel calls for shorter oil-change intervals or S-O-S-based adjustment. |
| Transmission / marine gear, final drives, hydraulic system, axles | Not applicable to the base engine. The 3508B has no integral transmission, final drive, axle, or hydraulic system. | Not applicable. A marine reduction/reverse gear, if fitted downstream of the engine, is a separate assembly with its own OEM fluid chart and is not covered by the 3508B engine spec sheet. |
| Grease (accessory drives and couplings, spec only) | No factory-quantified grease capacity published for the base engine. Where fittings exist on accessory drives, couplings, or an attached generator's grease-lubricated bearing, grease to purge at each fitting per standard practice. | Cat Multipurpose Grease (NLGI 2) for any accessory-drive, coupling, or generator-bearing grease fittings associated with the package. The bare 3508B engine itself carries no documented chassis grease points on the marine spec sheets. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 3508B maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
| Every 8,000 h |
|
Servicing the 3508B beyond the schedule
Predictive Maintenance & Fluid Analysis
Run engine oil and coolant S.O.S sampling at every 250-hour service to catch wear metals, fuel dilution, and soot before injector or liner wear shows up as a power loss. ADEM II's monitoring and protection system logs sensor and injection-timing faults for review at each dealer visit. Trend aftercooler differential pressure across both turbocharger circuits to catch salt-side fouling before boost drops. Track jacket-water or keel-circuit temperature rise to flag marine growth or anode depletion early, before it reaches the cylinder head.
Corrective & Common Repairs
Common 3508B repairs center on the marine environment: turbocharger cartridge replacement from salt ingestion, raw-water pump impeller and shaft-seal renewal, and aftercooler core leaks from raw-water-side fouling. EUI injectors get pulled for recalibration or exchange when fuel trim drifts. ADEM II wiring harness connectors corrode at marine junctions and need cleaning or replacement. Exhaust elbows and risers corrode from wet-exhaust exposure and are a recurring failure point on high-hour boats.
Overhaul & Rebuild Points
Top-end overhaul renews cylinder liners, rings, and the 3508B's two-piece articulated pistons, forged steel crown, cast aluminum skirt, inspecting crown erosion and skirt scoring. Recondition cylinder heads: valves, seats, and guides. Rebuild both turbocharger cores, including bearings, seals, and wastegate actuators, and rebalance boost delivery across the dual-turbo layout afterward. At major overhaul, inspect main and connecting-rod bearings and the crankshaft vibration damper before returning the engine to service.
Seasonal & Environment Servicing
Before layup, drain or run antifreeze-compatible coolant through the raw-water side of the heat exchanger, aftercooler, and oil cooler to prevent freeze cracking; fog cylinders on engines going idle over winter. Pull zinc or pencil anodes before each season and replace early in salt water, where depletion runs faster. Keel-cooled installations skip raw-water winterizing but still need the hull-side keel circuit and through-hull fittings inspected. Check marine electrical connectors and the ADEM II harness for corrosion before re-commissioning.
3508B common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 1D-4540 | Bolt,Machine Fuel Filter Mounting | Fuel system service | Check fitment → |
| 5P-2645 | Elbow-Unfiltered Fuel From Adapter | Fuel system service | Check fitment → |
| 151-9265 | Harness As-Sensor | Fuel system service | Check fitment → |
| 6V-3907 | Seal-O-Ring | Fuel system service | Check fitment → |
| 4P-0710 | Filter Element As-Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
3508B fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 100-01 | Engine oil pressure below the safe operating range for current engine speed - actual low-pressure condition, not a sensor fault. | Low oil level, worn oil pump, plugged suction screen, failing pressure regulating valve, or diluted/wrong-viscosity oil. | Shut down, check oil level and condition, inspect for external leaks, verify with a mechanical gauge before restarting. |
| 110-0 | Engine coolant temperature above the safe operating range - actual overheat condition. | Low coolant level, fouled heat exchanger/aftercooler, failed raw-water pump, stuck thermostat, or a slipping drive belt. | Reduce load and shut down if temperature keeps climbing, check coolant level and raw-water flow, inspect the heat exchanger for fouling before restart. |
| 190-08 | Primary engine speed/timing sensor signal is erratic or outside the expected frequency range. | Loose or damaged speed/timing sensor, incorrect sensor air gap, worn flywheel timing ring, or chafed harness near the flywheel housing. | Check sensor mounting and air gap, inspect wiring for chafing, recalibrate or replace the sensor per the service procedure. |
| 342-08 | Secondary (backup) engine speed/timing sensor signal is erratic or out of range. | Same root causes as the primary sensor fault - loose mounting, wrong air gap, damaged ring-gear teeth, or harness damage on the redundant sensor circuit. | Verify the secondary sensor air gap and connector, compare its reading against the primary sensor with the diagnostic tool, replace if it will not recalibrate. |
| 168-02 | System (battery) voltage supplying the control module is erratic or intermittent. | Loose or corroded battery terminals, a failing charging alternator, worn ground straps, or an intermittent connector at the control module. | Check battery condition and terminals, verify charging output, clean and re-torque grounds, then clear and monitor for recurrence. |
| 1249-13 | Secondary throttle (governor) position input is out of calibration. | Throttle/governor actuator or linkage recently serviced or replaced without performing a calibration, or drift in the position sensor. | Run the secondary throttle calibration procedure with the electronic service tool; recheck linkage travel and connector condition if calibration will not hold. |
| 542-02 | Unfiltered (raw) engine oil pressure signal does not correlate with the filtered reading - erratic or incorrect data. | Oil pressure sensor installed in the wrong port, a miswired sensor, or a failing sensor producing an implausible raw signal. | Verify the oil pressure sensor is in the correct port and correctly wired, replace the sensor if wiring checks out, then re-verify readings with the service tool. |
| 253-02 | Personality/secondary control module data is erratic, pointing to a programming or communication mismatch between control modules. | Corrupted or mismatched module programming, a loose module connector, or a communication fault between primary and secondary modules on redundant-governor setups. | Check module connectors, verify software/personality module compatibility with the service tool, reprogram or reseat the module as needed. |
| 579-05 | An injector solenoid circuit reads current below the expected range - an open or high-resistance circuit to that cylinder's injector. | Broken or corroded injector solenoid wiring, a failed injector solenoid, or a disconnected harness connector at that cylinder. | Check the injector wiring and connector for that cylinder, measure solenoid resistance, repair the harness or replace the injector as needed. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
3508B attachments & work tools
Propulsion / marine gear configuration
Offered as a propulsion engine with SAE flywheel housing for direct coupling to a reduction/reverse marine gear, driving fixed-pitch or controllable-pitch propellers. The published high-performance propulsion rating tops out at 1119 bkW (1500 bhp) at 1925 rpm for fast patrol craft and yachts running a low load factor; the specific gear ratio and gear make are matched per vessel and are not a fixed factory attachment.
Generator-set (auxiliary) configuration
Available as an auxiliary/generator-set package paired with a Cat SR4B or SR5 single-bearing generator end and digital voltage regulator (three-phase sensing, selectable volts/Hz, steady-state regulation about +/-0.5%). Offered at 50 Hz or 60 Hz; offshore and marine genset packages are commonly seen in roughly the 590-910 ekW (738 to 1138 kVA) range, with inner-outer base mounting and optional vibration isolators.
Cooling system options
Factory choice between keel cooling (jacket water circulated through external hull piping, no raw-water pump, favored for silty or icy operating water) and heat exchanger/seawater cooling (raw-water pump and tube-and-shell exchanger). Charge air uses separate-circuit aftercooling (SCAC) with a corrosion-resistant-coated aftercooler core; this DITA (direct-injection, turbocharged, aftercooled) arrangement is the standard 3508B configuration.
Turbocharger arrangement
Dual rear-mounted turbochargers with water-cooled bearings and heat shields are standard on the 3508B marine arrangement, feeding the separate-circuit aftercooler noted above.
Control / governor system
Uses the ADEM II electronic engine control and monitoring system for governing, injection timing, and protection, with self-diagnosing sensors; a Customer Communication Module is available for remote monitoring and data logging. This electronic ADEM II governor is what distinguishes the 3508B from the earlier mechanically-governed 3508 and from the later 3508C, which moved to a newer ADEM control generation - do not blend specs across those variants.
Exhaust system
Dry, gas-tight exhaust manifolds with heat shields are standard, terminating in a vertical round flanged outlet around 203 mm (8 in); flexible fittings and elbows are fitted to suit shipyard-specific exhaust routing.
Classification society approval
3508B marine gensets and propulsion packages are offered with type-approved coupling/certification paths through classification societies such as ABS, DNV, or GL (Lloyd's), and the line meets IMO Tier I-equivalent emissions for the applicable build era. Society-specific certificates are issued per serial number rather than blanket-approved.
Typical vessel/application classes for this rating band
Common placements for this power class include tugboats in the roughly 21-40 m (70-130 ft) range, workboats/utility vessels around 24-46 m (80-150 ft), fishing vessels around 27-43 m (90-140 ft), and offshore drilling/production platform generator sets.
All 3508B assemblies by section
Every catalogued assembly group for the Caterpillar 3508B. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
7w-9828 Adapter Gp-Air Cleaner
| 1W***31 | Strip | 8 |
| 1W***32 | Strip | 4 |
| 1W***33 | Strip | 8 |
4p-2013 Adapter Gp-Air Cleaner
| 11***36 | Valve As-Shutoff; (Jacket Water Heater) | 1 |
| 3B***45 | Nipple-Pipe; (3/4-14 Npt Thd)(Both Ends) | 1 |
| 4P***13 | Adapter Group-Air Cleaner | 1 |
7n-8549 Adapter Gp-Air Cleaner
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 50 |
| 1W***32 | Strip | 2 |
| 1W***34 | Strip | 2 |
4p-2015 Adapter Gp-Air Cleaner
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 28 |
| 4M***25 | B. 5/16 N.C. X 1" | 28 |
| 4P***34 | Gasket | 1 |
108-1581 Aftercooler Gp-Treated Water
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 48 |
| 10***81 | Aftercooler Group-Treated Water | 1 |
| 5N***30 | Gasket | 2 |
199-5600 Air Cleaner Gp
| 19***00 | Air Cleaner Group | 1 |
| 4P***10 | Filter Element As-Air; (Primary) | 1 |
| 7W***95 | Guide As | 1 |
158-6242 Air Cleaner Gp
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 6 |
| 15***42 | Air Cleaner Group | 1 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 6 |
199-5599 Air Cleaner Gp
| 19***99 | Air Cleaner Group | 1 |
| 8N***78 | Air Cleaner Group; -Lh | 1 |
8n-3378 Air Cleaner Gp
| 8N***56 | Filter Element As-Air; (Secondary) | 1 |
| 8N***59 | Gasket-Air Cleaner Cover | 1 |
| 8N***62 | Housing As-Air Cleaner | 1 |
5n-7822 Air Cleaner Gp
| 10***58 | Seal; (Aftercooler) | 2 |
| 11***59 | Core As-Aftercooler | 1 |
| 5N***22 | Air Cleaner Group; -2 Required | 1 |
8n-9303 Air Cleaner Gp
| 1B***82 | Bolt (1.25 In. Long X .313 In. Dia.) | 2 |
| 2K***73 | Locknut Inside Guard Assembly | 4 |
| 5S***03 | Nut-Full; (5/16 X 18 Thd) | 2 |
199-5598 Air Cleaner Gp
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 3 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 4 |
188-7035 Bracket As -Jacket Water Heater
| 11***78 | Filter Element As-Air; (Primary) | 2 |
| 18***35 | Bracket As; -Jacket Water Heater | 1 |
| 7W***95 | Guide As | 1 |
289-8498 Damper Gp-Air Shutoff
| 28***98 | Damper Group-Air Shutoff | 1 |
8n-8487 Elbow Gp-Exhaust
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 1 |
| 8N***87 | Elbow Group-Exhaust | 1 |
| 9S***04 | Plug-O-Ring; (Straight Thread O-Ring) | 1 |
5n-2458 Elbow-Exhaust
| 5N***58 | Elbow-Exhaust | 1 |
5l-6954 Elbow-Exhaust
| 1D***66 | Bolt Bracket Assembly To Yoke | 2 |
| 1D***69 | Bolt 107.95 mm(4.25 In.) Long; Bolt (Plate To Front Housing) | 2 |
| 5L***54 | Elbow-Exhaust | 1 |
5l-7520 Elbow-Exhaust
| 5L***20 | Elbow-Exhaust | 1 |
8n-2555 Filter-Soot
| 8N***55 | Filter-Soot | 1 |
7n-6967 Fitting Gp-Exhaust -Flexible
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 12 |
| 1B***55 | Nut,Plain,Hexagon Turbocharger Mounting | 12 |
| 1B***57 | Nut-Full; 19.05mm(.75in)O.D. | 12 |
7n-6968 Fitting Gp-Exhaust
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 8 |
| 24***12 | Gasket; (Exhaust) | 1 |
| 2B***58 | Plug--To Block Upper Front Air Manifold | 1 |
5n-2457 Fitting Gp-Exhaust -Flexible
| 5N***57 | Fitting Group-Exhaust; -Flexible | 1 |
5n-9527 Fitting Gp-Exhaust -Flexible
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 8 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 8 |
| 21***45 | Bellows As | 1 |
7n-6962 Flange Gp-Exhaust
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 8 |
| 3V***08 | Washer-Hard; (10.2x20.5x2.5-mm Thk)(Shield To Head) | 16 |
| 5L***73 | Gasket-Exhaust Elbow | 1 |
2w-7866 Flange Gp-Exhaust
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 8 |
| 2W***66 | Flange Group-Exhaust | 1 |
| 3V***08 | Washer-Hard; (10.2x20.5x2.5-mm Thk)(Shield To Head) | 8 |
7n-6961 Flange Gp-Exhaust
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 12 |
| 1B***55 | Nut,Plain,Hexagon Turbocharger Mounting | 12 |
| 1B***57 | Nut-Full; 19.05mm(.75in)O.D. | 12 |
2w-7871 Flange Gp-Exhaust
| 1B***57 | Nut-Full; 19.05mm(.75in)O.D. | 12 |
| 2W***67 | Flange-Exhaust | 1 |
| 2W***68 | Gasket-Exhaust | 1 |
254-9222 Flange Gp-Exhaust
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 12 |
| 25***22 | Flange Group-Exhaust | 1 |
| 5M***94 | Washer; Bracket To Tee, Bracket To Block, Tube As. To Tee, Tube As. To Oil Cooler | 12 |
7n-6782 Indicator Gp-Air Filter Change
| 1D***27 | Bolt,Machine Head Mtg Uoc:Bsv,Bsx | 12 |
| 25***38 | Flange | 1 |
| 25***89 | Gasket | 1 |
107-0860 Lines Gp-Air
| 10***60 | Lines Group-Air | 1 |
| 3B***52 | Elbow; --Cross To Hose Assembly To Air Gauge | 2 |
| 5L***33 | Fitting (To Air Cleaner) | 2 |
107-7183 Manifold Gp-Exhaust
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 22 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 4 |
123-0324 Manifold Gp-Exhaust
| 10***45 | Manifold-Exhaust; (Front, Rh) | 1 |
| 10***46 | Manifold-Exhaust; (Intermediate, Rh) | 2 |
| 10***47 | Manifold-Exhaust; (Front, Lh) | 1 |
2w-4075 Muffler
| 2W***75 | Muffler | 1 |
2w-4073 Muffler
| 10***46 | Manifold-Exhaust; (Intermediate, Rh) | 2 |
| 10***48 | Manifold-Exhaust; (Intermediate, Lh) | 2 |
| 11***14 | Washer; (10.3x18.3x2.66-mm Thk) | 104 |
2w-4076 Muffler
| 2W***76 | Muffler | 1 |
141-7047 Muffler
| 14***47 | Muffler | 1 |
264-0023 Muffler Gp-Spark Arrestor
| 26***23 | Muffler Group-Spark Arrestor | 1 |
214-6395 Muffler Gp-Spark Arrestor
| 21***95 | Muffler Group-Spark Arrestor | 1 |
141-6748 Shield Gp-Exhaust
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 8 |
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 2 |
| 11***31 | Shield As-Exhaust; (Outer Rh, Front)(Outer Rh Front) | 1 |
235-7172 Shield Gp-Exhaust
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 8 |
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 2 |
| 11***31 | Shield As-Exhaust; (Outer Rh, Front)(Outer Rh Front) | 1 |
107-7202 Shield Gp-Exhaust
| 10***02 | Shield Group-Exhaust | 1 |
124-5510 Shield Gp-Exhaust
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 8 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
| 11***57 | Shield As-Exhaust | 2 |
317-1697 Shield Gp-Exhaust
| 17***21 | Shield As-Exhaust; (Crossover) | 1 |
| 23***40 | Shield As-Heat; (Turbocharger)(Top) | 1 |
| 23***41 | Shield As-Heat; (Turbocharger)(Bottom) | 1 |
317-1696 Shield Gp-Exhaust
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 8 |
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 1 |
| 11***31 | Shield As-Exhaust; (Outer Rh, Front)(Outer Rh Front) | 1 |
321-3844 Shield Gp-Exhaust
| 17***21 | Shield As-Exhaust; (Crossover) | 1 |
| 23***49 | Strap | 2 |
| 23***20 | Shield As-Heat; (Top) | 1 |
321-3845 Shield Gp-Exhaust
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 8 |
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 1 |
| 11***31 | Shield As-Exhaust; (Outer Rh, Front)(Outer Rh Front) | 1 |
148-6855 Shield Gp-Exhaust
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 8 |
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 1 |
| 11***31 | Shield As-Exhaust; (Outer Rh, Front)(Outer Rh Front) | 1 |
257-6899 Shield Gp-Turbocharger
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 8 |
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 1 |
| 11***31 | Shield As-Exhaust; (Outer Rh, Front)(Outer Rh Front) | 1 |
215-2706 Shutoff As-Air -Inlet
| 21***06 | Shutoff As-Air; -Inlet | 1 |
| 23***60 | Tape; -Anti-Splash | 1 |
| 25***55 | Shield-Fuel Line Fitting; (18.05-mm Id) | 2 |
288-2758 Shutoff Gp-Air -Rh
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 9 |
| 11***49 | Strap | 1 |
122-5946 Shutoff Gp-Air -Inlet
| 12***46 | Shutoff Group-Air; -Inlet | 2 |
| 12***66 | Solenoid As; (Air Shutoff) | 1 |
| 12***21 | Ring | 1 |
214-5543 Shutoff Gp-Air -Inlet
| 12***46 | Shutoff Group-Air; -Inlet | 1 |
| 14***03 | Shaft-Solenoid | 1 |
| 16***48 | Solenoid As; (Air Shutoff) | 1 |
118-6676 Shutoff Gp-Air -Inlet
| 11***49 | Strap | 1 |
| 11***50 | Bracket | 1 |
| 11***51 | Elbow; (Air Inlet) | 2 |
274-5749 Shutoff Gp-Air -Inlet
| 15***15 | Ring-Retaining | 1 |
| 21***28 | Sleeve As | 1 |
| 21***29 | Spring | 1 |
141-6746 Shutoff Gp-Air -Inlet
| 0S***14 | Bolt (.25" Diameter-.50" Long) | 3 |
| 0S***15 | Bolt 19 mm (.75 In.) Long Return Air Console To Enclosed Rops | 1 |
| 11***43 | Plate | 1 |
272-7095 Shutoff Gp-Air -Inlet, Lh
| 21***87 | Bolt; (1/4-20x0.75-In) | 2 |
| 23***73 | Solenoid As; (Air Shutoff) | 1 |
| 27***95 | Shutoff Group-Air; -Inlet, Lh | 1 |
272-7094 Shutoff Gp-Air -Inlet, Rh
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 9 |
| 11***49 | Strap | 1 |
122-3385 Shutoff Gp-Air
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 8 |
| 11***49 | Strap | 1 |
| 11***50 | Bracket | 1 |
288-2762 Shutoff Gp-Air -Rh
| 21***87 | Bolt; (1/4-20x0.75-In) | 2 |
| 23***73 | Solenoid As; (Air Shutoff) | 1 |
| 28***62 | Shutoff Group-Air; -Rh | 1 |
272-7098 Shutoff Gp-Air -Inlet, Rh
| 21***87 | Bolt; (1/4-20x0.75-In) | 2 |
| 23***73 | Solenoid As; (Air Shutoff) | 1 |
| 27***98 | Shutoff Group-Air; -Inlet, Rh | 1 |
288-2763 Shutoff Gp-Air -Lh
| 15***15 | Ring-Retaining | 1 |
| 21***28 | Sleeve As | 1 |
| 21***29 | Spring | 1 |
272-7099 Shutoff Gp-Air -Inlet, Lh
| 15***15 | Ring-Retaining | 1 |
| 21***28 | Sleeve As | 1 |
| 21***29 | Spring | 1 |
288-2759 Shutoff Gp-Air -Lh
| 21***87 | Bolt; (1/4-20x0.75-In) | 2 |
| 23***73 | Solenoid As; (Air Shutoff) | 1 |
| 28***59 | Shutoff Group-Air; -Lh | 1 |
107-9523 Turbocharger Gp
| 10***23 | Turbocharger Group | 1 |
| 15***15 | Ring-Retaining | 1 |
| 21***28 | Sleeve As | 1 |
113-5180 Turbocharger Gp
| 11***80 | Turbocharger Group | 3 |
| 12***36 | Gasket; (Turbocharger) | 2 |
| 18***72 | Flange-Half | 4 |
119-5998 Turbocharger Gp
| 11***98 | Turbocharger Group | 1 |
| 12***20 | Housing-Turbine | 1 |
| 19***26 | Cartridge Group-Turbocharger | 1 |
107-9524 Turbocharger Gp
| 10***24 | Turbocharger Group | 1 |
| 11***98 | Turbocharger Group | 2 |
| 12***36 | Gasket; (Turbocharger) | 2 |
8n-8483 Valve Gp-Air Control -Rh
| 12***08 | Housing; (Turbine) | 1 |
| 12***92 | Cover-Compressor | 1 |
| 28***81 | Cartridge Group-Turbocharger | 1 |
Basic Engine
8n-8360 Air Compressor Gp
| 03***72 | Elbow; (Flared 90 Degree) | 1 |
| 03***69 | Elbow-Flared; (1/2-14 Nptf) | 5 |
| 03***77 | Tee-Pipe | 1 |
144-0742 Air Compressor Gp
| 03***60 | Bolt-Self Locking; (5/16-18x1.0) | 8 |
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 1 |
| 0S***15 | Bolt 19 mm (.75 In.) Long Return Air Console To Enclosed Rops | 2 |
1w-8495 Air Compressor Gp
| 03***60 | Bolt-Self Locking; (5/16-18x1.0) | 8 |
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 1 |
| 0S***15 | Bolt 19 mm (.75 In.) Long Return Air Console To Enclosed Rops | 2 |
101-0833 Balancer Gp -Front
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 10***33 | Balancer Group; -Front | 1 |
| 10***65 | Plate-Thrust | 1 |
253-2468 Barring Gp -Rh
| 25***68 | Barring Group; -Rh | 1 |
| 3R***37 | Device-Barring | 1 |
| 4H***69 | Gasket Starter Mtg Part Of Kit P/N 5r***25 | 1 |
5r-7425 Barring Gp -Lh
| 3R***37 | Device-Barring | 1 |
| 4H***69 | Gasket Starter Mtg Part Of Kit P/N 5r***25 | 1 |
| 5R***25 | Barring Group; Barring Group-Engine | 1 |
120-7413 Base Gp-Valve Cover
| 11***38 | Spacer; (17.5x30.94x98-mm) | 1 |
| 11***39 | Spacer; (17.5x30.94x98-mm) | 1 |
| 12***39 | Washer-Spring | 1 |
247-8341 Base Gp-Valve Cover
| 11***38 | Spacer; (17.5x30.94x98-mm) | 1 |
| 11***39 | Spacer; (17.5x30.94x98-mm) | 1 |
| 12***39 | Washer-Spring | 1 |
106-4582 Camshaft Gp
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 10***82 | Camshaft Group | 1 |
| 11***08 | Plate | 2 |
3n-4128 Clutch As
| 0L***39 | Bolt (3/8-24x2.25in); (3/8-24x2.25-In) | 2 |
| 1L***63 | Washer-Spring | 8 |
| 2L***67 | Locknut; (3/8-24-Thd) | 2 |
3n-4130 Clutch Gp
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 1 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
247-0308 Coupling Gp-Flexible -Generator
| 24***91 | Coupling; (Outer) | 1 |
| 24***08 | Coupling Group-Flexible; -Generator | 1 |
| 24***32 | Washer; (17x30x3-mm Thk) | 12 |
219-0578 Coupling Gp-Flexible -Generator
| 16***27 | Coupling | 1 |
| 16***31 | Adapter | 1 |
| 16***33 | Bolt-12 Point Head; (5/8-11x4.25-In) | 12 |
268-6475 Coupling Gp-Flexible -Generator
| 24***08 | Coupling Group-Flexible; -Generator | 1 |
| 26***75 | Coupling Group-Flexible; -Generator | 1 |
| 4M***53 | Washer-Hard; (24x38x3.5-mm Thk) | 8 |
282-9522 Coupling Gp-Flexible
| 24***08 | Coupling Group-Flexible; -Generator | 1 |
| 28***22 | Coupling Group-Flexible | 1 |
| 8D***42 | Bolt-12 Point Head; (5/8-11x6.5-In) | 12 |
5n-3765 Coupling Gp-Flexible -Viscous Dampened
| 0S***89 | Bolt, Hex. Hd., 5/8"-11 N.C. X 1 3/4" | 12 |
| 1A***37 | Bolt Clutch Assembly To Bracket (Fan Support) | 12 |
| 3N***66 | Coupling-Drive | 1 |
3n-8594 Cover Gp-Engine Lifting Eye
| 3E***65 | Nut-Hard-Self Lock; (1/4unc) | 1 |
| 3N***93 | Cover-Eye | 1 |
| 3N***94 | Cover Group | 1 |
155-2564 Cover Gp-Camshaft
| 13***61 | Washer; (10.2x18.5x2.5-mm Thk) | 6 |
| 13***69 | Bolt; (3/8-16x1-In) | 6 |
| 15***64 | Cover Group-Camshaft | 1 |
155-2583 Cover Gp-Camshaft
| 13***61 | Washer; (10.2x18.5x2.5-mm Thk) | 10 |
| 13***69 | Bolt; (3/8-16x1-In) | 10 |
| 15***74 | Cover-Camshaft | 1 |
153-7204 Cover Gp-Cylinder Block
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 60 |
| 15***04 | Cover Group-Cylinder Block | 1 |
155-2563 Cover Gp-Cylinder Block -Crankcase
| 13***61 | Washer; (10.2x18.5x2.5-mm Thk) | 4 |
| 13***68 | Bolt; (3/8-16x1-In) | 4 |
| 15***63 | Cover Group-Cylinder Block; -Crankcase | 1 |
121-3553 Cover Gp-Cylinder Block
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 12 |
| 11***66 | Bracket-Mounting | 1 |
4w-1529 Cover Gp-Flywheel Housing -Rear Structure
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 2 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 3 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 17 |
268-7739 Cover Gp-Front Housing -Rh
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 7 |
| 26***39 | Cover Group-Front Housing; -Rh | 1 |
| 2W***85 | Cover | 1 |
107-0278 Cover Gp-Front Housing
| 10***78 | Cover Group-Front Housing | 1 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 27 |
| 23***46 | Seal-O-Ring | 2 |
112-8106 Cover Gp-Front Housing
| 11***06 | Cover Group-Front Housing | 1 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 37 |
| 1C***51 | Bolt--Installation Of 2v***26 Retainer | 1 |
2w-5616 Cover Gp-Oil Pan
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 2W***16 | Cover Group-Oil Pan | 1 |
| 5M***94 | Washer; Bracket To Tee, Bracket To Block, Tube As. To Tee, Tube As. To Oil Cooler | 4 |
101-0831 Cover Gp-Valve Mechanism
| 10***31 | Cover Group-Valve Mechanism | 1 |
| 10***97 | Cover | 1 |
| 1A***79 | Capscrew (5/16 - 18 Nc X 1 1/2 Gd5, Hex) | 4 |
155-2566 Cover Gp-Valve Mechanism
| 13***65 | Washer; (8.8x16x2-mm Thk) | 4 |
| 13***70 | Bolt; (5/16-18x1.5-In) | 4 |
| 15***66 | Cover Group-Valve Mechanism | 1 |
155-2565 Cover Gp-Valve Mechanism
| 13***65 | Washer; (8.8x16x2-mm Thk) | 4 |
| 13***70 | Bolt; (5/16-18x1.5-In) | 4 |
| 15***65 | Cover Group-Valve Mechanism | 1 |
101-0336 Crankshaft Gp
| 10***36 | Crankshaft Group | 1 |
| 12***45 | Bolt As; (5/8-18x4.25-In)(Counterweight) | 18 |
| 14***31 | Bearing As-Main; (Standard) | 5 |
101-1171 Cylinder Block As
| 10***71 | Cylinder Block As | 1 |
| 21***26 | Liner-Cylinder Block | 8 |
| 22***96 | Cap-Crankshaft Bearing | 5 |
350-1409 Cylinder Block As
| 22***96 | Cap-Crankshaft Bearing | 5 |
| 35***09 | Cylinder Block As | 1 |
| 4W***13 | Plug; (2-1/4-12 Thd) | 2 |
237-7957 Cylinder Block Gp
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
| 10***71 | Cylinder Block As | 1 |
| 10***98 | Bearing-Camshaft | 10 |
101-0827 Cylinder Block Gp
| 03***42 | Seal-O-Ring; (11.89mm Id) | 6 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
| 0T***02 | Bolt; (3/8-16x0.625-In)(Shield To Head) | 8 |
155-5274 Cylinder Head As
| 13***23 | Cylinder Head As | 1 |
| 13***06 | Guide-Valve; (Standard)(Intake) | 4 |
| 14***82 | Guide-Valve; (0.508mm Os Od)(Exhaust) | 0 |
161-2508 Cylinder Head As
| 13***06 | Guide-Valve; (Standard)(Intake) | 4 |
| 14***82 | Guide-Valve; (0.508mm Os Od)(Exhaust) | 0 |
| 15***12 | Cylinder Head As | 1 |
119-7330 Cylinder Head As
| 10***75 | Cylinder Head As | 1 |
| 11***30 | Cylinder Head As | 1 |
| 7N***19 | Guide-Valve; (Intake) | 4 |
242-5328 Cylinder Head As
| 13***06 | Guide-Valve; (Standard)(Intake) | 2 |
| 14***82 | Guide-Valve; (0.508mm Os Od)(Exhaust) | 0 |
| 19***95 | Guide-Valve; (Standard)(Exhaust) | 2 |
101-1175 Cylinder Head As
| 10***75 | Cylinder Head As | 1 |
| 11***91 | Insert-Valve Seat; (Exhaust) | 2 |
| 14***45 | Insert-Valve Seat; (0.508-mm Os Od)(Inlet) | 0 |
154-1612 Cylinder Head As
| 13***07 | Insert-Valve Seat; (Standard)(Intake) | 2 |
| 13***08 | Insert-Valve Seat; (Standard)(Exhaust) | 2 |
| 14***81 | Insert-Valve Seat; (0.51-mm Os Od)(Intake) | 0 |
131-0423 Cylinder Head As
| 13***23 | Cylinder Head As | 1 |
| 13***40 | Insert-Valve Seat; (Standard)(Exhaust) | 2 |
| 13***30 | Insert-Valve Seat; (Standard)(Inlet) | 2 |
131-4338 Cylinder Head As
| 13***13 | Guide-Valve; (Standard) | 4 |
| 13***23 | Cylinder Head As | 1 |
| 13***38 | Cylinder Head As | 1 |
101-1174 Cylinder Head Gp
| 10***74 | Cylinder Head Group | 1 |
| 10***75 | Cylinder Head As | 1 |
| 10***77 | Spring-Valve; (Inner) | 4 |
101-0830 Cylinder Head Gp
| 10***30 | Cylinder Head Group | 1 |
| 11***91 | Gasket-Cylinder Head | 1 |
| 13***20 | Fastener Group-Cylinder Head | 6 |
317-2440 Cylinder Head Gp
| 13***06 | Guide-Valve; (Standard)(Intake) | 2 |
| 14***82 | Guide-Valve; (0.508mm Os Od)(Exhaust) | 0 |
| 15***12 | Cylinder Head As | 1 |
145-3216 Cylinder Head Gp
| 10***77 | Spring-Valve; (Inner) | 4 |
| 10***80 | Spring-Valve; (Outer) | 4 |
| 13***06 | Guide-Valve; (Standard)(Intake) | 4 |
155-5273 Cylinder Head Gp
| 10***77 | Spring-Valve; (Inner) | 4 |
| 10***80 | Spring-Valve; (Outer) | 4 |
| 12***39 | Valve-Exhaust | 2 |
201-4257 Cylinder Head Gp
| 13***06 | Guide-Valve; (Standard)(Intake) | 2 |
| 14***82 | Guide-Valve; (0.508mm Os Od)(Exhaust) | 0 |
| 15***12 | Cylinder Head As | 1 |
6i-3699 Damper Gp
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 48 |
| 3V***31 | Washer; (10.2x16x2-mm Thk)(16mm Od) | 48 |
| 4D***49 | Seal-O-Ring; (552.04mm Id) | 1 |
4w-3113 Damper Gp
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 18 |
| 17***70 | Damper Group | 1 |
| 1N***82 | Adapter | 1 |
100-4324 Damper Gp
| 10***24 | Damper Group | 1 |
| 6I***97 | Damper Group | 1 |
| 7C***41 | Damper Group | 1 |
6i-3697 Damper Gp
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 48 |
| 3V***31 | Washer; (10.2x16x2-mm Thk)(16mm Od) | 48 |
| 4D***49 | Seal-O-Ring; (552.04mm Id) | 1 |
100-4323 Damper Gp
| 10***23 | Damper Group | 1 |
| 6I***98 | Damper Group; Damper Gp-Basic | 1 |
| 7C***40 | Damper Group; Damper Gp-Basic | 1 |
146-3740 Damper Gp
| 14***40 | Damper Group | 1 |
| 15***63 | Washer; (10.35x16x2-mm Thk) | 2 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 48 |
8n-0339 Damper Gp
| 10***24 | Damper Group | 1 |
| 1N***82 | Adapter | 1 |
| 5P***50 | Washer-Front Support Frame Assembly To | 6 |
171-4570 Damper Gp
| 15***63 | Washer; (10.35x16x2-mm Thk) | 2 |
| 17***70 | Damper Group | 1 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 30 |
100-4325 Damper Gp
| 10***25 | Damper Group | 1 |
| 6I***99 | Damper Group | 1 |
| 7C***39 | Damper Group | 1 |
7c-9639 Damper Gp
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 48 |
| 3V***31 | Washer; (10.2x16x2-mm Thk)(16mm Od) | 48 |
| 4D***49 | Seal-O-Ring; (552.04mm Id) | 1 |
6i-3698 Damper Gp
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 30 |
| 3V***31 | Washer; (10.2x16x2-mm Thk)(16mm Od) | 30 |
| 4B***84 | Screw-Machine; (1/4-20x1-In) | 3 |
8n-7182 Damper Gp
| 19***88 | Damper As | 1 |
| 2M***49 | Washer-Retainer To Fan Bracket Assembly | 10 |
| 5P***50 | Washer-Front Support Frame Assembly To | 6 |
171-4571 Damper Gp
| 15***63 | Washer; (10.35x16x2-mm Thk) | 2 |
| 17***71 | Damper Group | 1 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 48 |
7c-9640 Damper Gp
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 30 |
| 3V***31 | Washer; (10.2x16x2-mm Thk)(16mm Od) | 30 |
| 4B***84 | Screw-Machine; (1/4-20x1-In) | 3 |
7c-9641 Damper Gp
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 48 |
| 3V***31 | Washer; (10.2x16x2-mm Thk)(16mm Od) | 48 |
| 4D***49 | Seal-O-Ring; (552.04mm Id) | 1 |
210-6112 Drain Gp-Engine Oil -Pan
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
| 15***29 | Valve; (Stainless Steel) | 1 |
| 15***64 | Cover As | 1 |
9y-7876 Drain Gp-Engine Oil -Pan
| 1F***60 | Nipple-Pipe | 1 |
| 3E***30 | Plug-Pipe; (3/4-14 Nptf) | 1 |
| 6F***68 | Gasket; (Oil Pan) | 1 |
8n-5767 Drive Gp-Accessory -Lower Lh
| 0S***92 | Bolt--Cover To Flywheel Housing | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
| 12***00 | Bearing-Sleeve | 2 |
7n-4871 Drive Gp-Accessory -Upper, Rh
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
7e-7647 Drive Gp-Accessory -Lower, Lh
| 0S***92 | Bolt--Cover To Flywheel Housing | 2 |
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 1 |
| 12***00 | Bearing-Sleeve | 1 |
107-7361 Drive Gp-Accessory -Upper, Rh
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
| 10***66 | Gear-Accessory Drive; (55-Teeth) | 1 |
8n-9167 Drive Gp-Accessory -Lower, Lh
| 0S***92 | Bolt--Cover To Flywheel Housing | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 1 |
184-2445 Drive Gp-Accessory -Lower, Lh
| 0S***92 | Bolt--Cover To Flywheel Housing | 2 |
| 12***00 | Bearing-Sleeve | 1 |
| 18***45 | Drive Group-Accessory; -Lower, Lh | 1 |
8n-9166 Drive Gp-Accessory -Upper, Lh
| 0S***92 | Bolt--Cover To Flywheel Housing | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
| 12***00 | Bearing-Sleeve | 2 |
8n-5743 Drive Gp-Accessory -Upper, Lh
| 0S***92 | Bolt--Cover To Flywheel Housing | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 1 |
166-4357 Drive Gp-Accessory -Upper, Rh
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 0S***92 | Bolt--Cover To Flywheel Housing | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
7w-3953 Drive Gp-Fan -Suction
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 12 |
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 4 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
7w-3952 Drive Gp-Fan -Blower
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 12 |
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 4 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
3n-8647 Fastener Gp-Coupling
| 20***99 | Bolt-12 Point Head; (7/8-9x3-In) | 8 |
| 3N***47 | Fastener Group-Coupling; Fastener Group--Shaft And Hub | 1 |
| 8C***13 | Washer-Hard; (24x41.5x4-mm Thk) | 8 |
7n-4851 Flywheel Gp
| 1N***42 | Gear-Starting Motor; (183-Teeth) | 1 |
| 5P***39 | Washer-Hard; (28x42x4-mm Thk) | 12 |
| 7N***51 | Flywheel Group; Flywheel Group | 1 |
8n-7174 Gear Gp-Front -Standard Rotation
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 5 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 1 |
101-0834 Gear Gp-Rear -Cam Drive
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 10***34 | Gear Group-Rear; -Cam Drive | 1 |
| 10***63 | Gear As-Balancer; (92/35 Teeth)(Cluster Idler - Rear) | 1 |
126-2217 Guard Gp-Belt -Fan
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 2 |
| 0S***21 | Bolt --Brace To Starting Engine Mounting Pad; Bolt-- Brace To Starting Engine Mounting Pad | 4 |
7w-5780 Guard Gp-Belt -Alternator
| 27***35 | Spacer; (13.87x21.34x11-mm Thk) | 2 |
| 28***74 | Guard As-Alternator | 1 |
| 7W***80 | Guard Group-Belt; -Alternator | 1 |
271-9270 Guard Gp-Belt -Alternator
| 21***41 | Spacer; (13.9x21.3x8-mm Thk) | 2 |
| 26***27 | Plate As | 1 |
| 27***70 | Guard Group-Belt; -Alternator | 1 |
151-9228 Guard Gp-Belt -Alternator
| 15***28 | Guard Group-Belt; -Alternator | 1 |
| 17***59 | Guard As-Belt; (Alternator) | 1 |
| 5P***66 | Capscrew; (Hex Hd) (1/2-13 Nc X 1 1/2) (Gd 8 Z) | 1 |
275-5115 Guard Gp-Belt -Fan
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 2 |
| 0S***21 | Bolt --Brace To Starting Engine Mounting Pad; Bolt-- Brace To Starting Engine Mounting Pad | 4 |
7w-7214 Guard Gp-Belt -Fan
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***21 | Bolt --Brace To Starting Engine Mounting Pad; Bolt-- Brace To Starting Engine Mounting Pad | 4 |
| 2A***39 | Bolt,Machine Tube To Torque Converter And Tube To Oil Cooler | 2 |
151-9229 Guard Gp-Belt -Alternator
| 15***29 | Guard Group-Belt; -Alternator | 1 |
| 17***59 | Guard As-Belt; (Alternator) | 1 |
| 17***60 | Guard-Belt | 1 |
126-2214 Guard Gp-Belt -Fan
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 2 |
| 0S***21 | Bolt --Brace To Starting Engine Mounting Pad; Bolt-- Brace To Starting Engine Mounting Pad | 4 |
3n-5765 Guard Gp-Coupling -Flywheel
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 0S***21 | Bolt --Brace To Starting Engine Mounting Pad; Bolt-- Brace To Starting Engine Mounting Pad | 10 |
| 1V***23 | Plate | 2 |
8n-9639 Guard Gp-Damper
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 6 |
| 10***67 | Housing-Flywheel | 1 |
| 1D***90 | Bolt 4.75 In.(120.65 mm) Long | 16 |
7w-6669 Guard Gp-Damper
| 03***35 | Bolt-Self Locking; 2.22cm(.875 In.) Lg | 6 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 4 |
| 0S***21 | Bolt --Brace To Starting Engine Mounting Pad; Bolt-- Brace To Starting Engine Mounting Pad | 8 |
101-0836 Housing Gp-Flywheel -Rear Mount
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 6 |
| 10***36 | Housing Group-Flywheel; -Rear Mount | 1 |
| 10***67 | Housing-Flywheel | 1 |
7w-3724 Housing Gp-Front -Accessory Drive
| 7W***24 | Housing Group-Front; -Accessory Drive | 1 |
4p-5426 Housing Gp-Front -Accessory Drive
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 4 |
| 10***34 | Housing-Accessory Drive | 1 |
| 1D***93 | Bolt 5.5 In. (13.97 cm) Long | 10 |
3n-5596 Hub-Flexible Coupling
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 4 |
| 15***26 | Bracket As | 2 |
| 19***86 | Retainer-Eye; (Rear) | 1 |
7e-6872 Lifting Gp-Engine
| 05***65 | Sleeve | 1 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
| 14***16 | Belt-Serpentine; (Alternator) | 1 |
7e-4836 Mounting Gp-Alternator
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 4 |
| 14***16 | Belt-Serpentine; (Alternator) | 1 |
| 1A***68 | Bolt 7.50 In. (19.05 cm) Long | 1 |
2w-8532 Mounting Gp-Engine
| 2W***30 | Support As | 4 |
| 2W***32 | Mounting Group-Engine | 1 |
| 8T***94 | Washer; (3/4 Hardened) (Current Adapters) | 26 |
4w-3651 Mounting Gp-Engine
| 1J***57 | Bolt (2" Long) | 4 |
| 1K***16 | Spacer; (21.6x27.2x33.3-mm Thk) | 4 |
| 2A***38 | Bolt-(3/4" X 2-1/4")-Rops Mounting Bracket To Fender | 6 |
115-4493 Mounting Gp-Engine & Generator
| 11***93 | Mounting Group-Engine & Generator | 1 |
| 13***14 | Shim; (0.157-In Thk) | 8 |
| 13***33 | Shim Pack; (Includes 13-Shims) | 4 |
8n-9567 Mounting Gp-Engine Flexible
| 15***65 | Mount As | 6 |
| 5P***97 | Washer; (17x45x6-mm Thk) | 6 |
| 8N***67 | Mounting Group-Engine Flexible | 1 |
7w-0284 Mounting Gp-Hyd Pump Drive
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 10 |
| 17***71 | Damper Group | 1 |
| 2W***14 | Coupling-Front Power Take-Off | 1 |
7w-0283 Mounting Gp-Hyd Pump Drive
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 10 |
| 2W***14 | Coupling-Front Power Take-Off | 1 |
| 4N***83 | Dowel; (31.8mm X 15.88mm) | 2 |
7c-6887 Pan Gp-Oil
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 18 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 0T***65 | Bolt--3/8" X 3 1/2"--Use As Required; Bolt 5t***56 Plate To Cover Gp 4n***72 | 26 |
9y-3086 Pan Gp-Oil
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 6 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
9y-3083 Pan Gp-Oil -Deep Sump
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 6 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
7c-7185 Pan Gp-Oil -Deep Sump
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 18 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 0T***65 | Bolt--3/8" X 3 1/2"--Use As Required; Bolt 5t***56 Plate To Cover Gp 4n***72 | 26 |
101-0829 Piston & Rod Gp
| 10***29 | Piston & Rod Group | 1 |
| 10***30 | Bearing-Connecting Rod; (Standard) | 1 |
| 10***31 | Bearing-Connecting Rod; (0.63-mm Us Id) | 0 |
223-6363 Piston & Rod Gp
| 0T***02 | Bolt; (3/8-16x0.625-In)(Shield To Head) | 1 |
| 10***30 | Bearing-Connecting Rod; (Standard) | 1 |
| 10***31 | Bearing-Connecting Rod; (0.63-mm Us Id) | 0 |
281-6139 Piston & Rod Gp
| 0T***02 | Bolt; (3/8-16x0.625-In)(Shield To Head) | 1 |
| 10***30 | Bearing-Connecting Rod; (Standard) | 1 |
| 10***31 | Bearing-Connecting Rod; (0.63-mm Us Id) | 0 |
7w-0282 Power Take-Off Gp
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 10 |
| 0T***20 | Bolt (1.25 In. Long X .438 In. Dia.) | 12 |
| 10***25 | Damper Group | 1 |
7w-0281 Power Take-Off Gp
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 10 |
| 0T***20 | Bolt (1.25 In. Long X .438 In. Dia.) | 12 |
| 2W***14 | Coupling-Front Power Take-Off | 1 |
7n-4106 Pulley As-Crankshaft
| 4W***35 | Kit-Bushing; (Crankshaft Pulley) | 1 |
| 7N***06 | Pulley As-Crankshaft | 1 |
8n-6564 Pulley As-Crankshaft
| 4W***35 | Kit-Bushing; (Crankshaft Pulley) | 1 |
| 8N***64 | Pulley As-Crankshaft | 1 |
210-9214 Pulley Gp-Auxiliary Drive -Lower Front, Lh
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 8 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 4 |
| 21***14 | Pulley Group-Auxiliary Drive; -Lower Front, Lh | 1 |
8n-8468 Pulley Gp-Auxiliary Drive -Upper Rear, Rh
| 05***65 | Sleeve | 1 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
| 23***84 | Seal-Lip Type | 1 |
210-8602 Pulley Gp-Auxiliary Drive -Upper Rear, Lh
| 05***65 | Sleeve | 1 |
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
8n-8467 Pulley Gp-Auxiliary Drive -Lower Front, Lh
| 05***65 | Sleeve | 1 |
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
210-9215 Pulley Gp-Auxiliary Drive -Lower Rear, Lh
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 8 |
| 0S***21 | Bolt --Brace To Starting Engine Mounting Pad; Bolt-- Brace To Starting Engine Mounting Pad | 4 |
| 21***15 | Pulley Group-Auxiliary Drive; -Lower Rear, Lh | 1 |
7n-8041 Pulley Gp-Auxiliary Drive -Lower Front, Lh
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 8 |
| 0S***21 | Bolt --Brace To Starting Engine Mounting Pad; Bolt-- Brace To Starting Engine Mounting Pad | 4 |
| 5M***94 | Washer; Bracket To Tee, Bracket To Block, Tube As. To Tee, Tube As. To Oil Cooler | 8 |
7w-5224 Pulley Gp-Fan Drive
| 4W***35 | Kit-Bushing; (Crankshaft Pulley) | 0 |
| 7N***06 | Pulley As-Crankshaft | 1 |
| 7N***60 | Shaft Group-Stub; -Crankshaft Pulley | 1 |
7w-8141 Pulley Gp-Fan Drive
| 7N***60 | Shaft Group-Stub; -Crankshaft Pulley | 1 |
| 7W***03 | Pulley-Crankshaft; (Crankshaft) | 1 |
| 7W***49 | Kit-Pulley Bushing; (Crankshaft Pulley) | 1 |
7w-5223 Pulley Gp-Fan Drive
| 4W***35 | Kit-Bushing; (Crankshaft Pulley) | 1 |
| 7N***60 | Shaft Group-Stub; -Crankshaft Pulley | 1 |
| 7W***09 | Pulley-Fan Drive | 1 |
7w-5232 Pulley Gp-Fan Drive
| 4W***35 | Kit-Bushing; (Crankshaft Pulley) | 1 |
| 7N***60 | Shaft Group-Stub; -Crankshaft Pulley | 1 |
| 7W***29 | V-Belt Set; (Includes 6-Belts)(Fan Drive) | 1 |
7w-5225 Pulley Gp-Fan Drive
| 4W***35 | Kit-Bushing; (Crankshaft Pulley) | 1 |
| 7N***60 | Shaft Group-Stub; -Crankshaft Pulley | 1 |
| 7W***25 | Pulley Group-Fan Drive | 1 |
7w-5253 Pulley Gp-Fan Drive
| 4W***07 | Pulley-Crankshaft | 1 |
| 7N***60 | Shaft Group-Stub; -Crankshaft Pulley | 1 |
| 7W***49 | Kit-Pulley Bushing; (Crankshaft Pulley) | 1 |
7w-5252 Pulley Gp-Fan Drive
| 4W***05 | Pulley-Crankshaft | 1 |
| 7N***48 | V-Belt Set; -Includes 4-Belts, Fan Drive-Fan Drive | 1 |
| 7N***60 | Shaft Group-Stub; -Crankshaft Pulley | 1 |
7w-3813 Seal Gp-Crankshaft
| 11***32 | Seal Group-Crankshaft; (Cw Rotation) | 1 |
| 11***33 | Seal Group-Crankshaft; (Ccw Rotation) | 1 |
| 7W***13 | Seal Group-Crankshaft | 1 |
209-3562 Shaft Gp-Auxiliary Drive -Upper Front, Lh
| 05***94 | Bolt-12 Point Head; (3/8-16x1.75-In) | 8 |
| 0S***21 | Bolt --Brace To Starting Engine Mounting Pad; Bolt-- Brace To Starting Engine Mounting Pad | 4 |
| 20***62 | Shaft Group-Auxiliary Drive; -Upper Front, Lh | 1 |
209-3560 Shaft Gp-Auxiliary Drive -Upper Rear, Lh
| 05***94 | Bolt-12 Point Head; (3/8-16x1.75-In) | 8 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 4 |
| 20***60 | Shaft Group-Auxiliary Drive; -Upper Rear, Lh | 1 |
209-3559 Shaft Gp-Auxiliary Drive -Upper Front, Rh
| 05***94 | Bolt-12 Point Head; (3/8-16x1.75-In) | 8 |
| 0S***21 | Bolt --Brace To Starting Engine Mounting Pad; Bolt-- Brace To Starting Engine Mounting Pad | 4 |
| 20***59 | Shaft Group-Auxiliary Drive; -Upper Front, Rh | 1 |
7n-8042 Shaft Gp-Auxiliary Drive -Lower Front, Lh
| 05***94 | Bolt-12 Point Head; (3/8-16x1.75-In) | 8 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 4 |
| 7C***08 | Seal-Lip Type | 1 |
7w-5237 Shaft Gp-Stub -Front
| 5F***62 | Washer-Hard; (28x44.5x4-mm Thk) | 12 |
| 5N***17 | Bolt-12 Point Head; (1-14x9.5-In) | 12 |
| 7W***28 | Shaft-Stub | 1 |
7w-3629 Shaft Gp-Stub -Front
| 5N***17 | Bolt-12 Point Head; (1-14x9.5-In) | 12 |
| 7W***79 | Shaft-Stub | 1 |
| 7W***29 | Shaft Group-Stub; -Front | 1 |
7n-7660 Drive Gp-Fan
| 5P***50 | Washer-Front Support Frame Assembly To | 6 |
| 7N***57 | Shaft-Stub | 1 |
| 7N***60 | Shaft Group-Stub; -Crankshaft Pulley | 1 |
5n-4830 Valve Gp-Explosion Relief -Crankcase
| 27***59 | Seal | 1 |
| 2W***84 | Kit-Repair; (Explosion Relief)(Crankcase) | 1 |
| 5M***94 | Washer; Bracket To Tee, Bracket To Block, Tube As. To Tee, Tube As. To Oil Cooler | 4 |
155-2567 Valve Gp-Explosion Relief
| 15***67 | Valve Group-Explosion Relief; (Crankcase) | 1 |
| 2W***84 | Kit-Repair; (Explosion Relief)(Crankcase) | 1 |
155-2586 Valve Gp-Explosion Relief
| 13***61 | Washer; (10.2x18.5x2.5-mm Thk) | 4 |
| 13***68 | Bolt; (3/8-16x1-In) | 4 |
| 15***67 | Valve Group-Explosion Relief; (Crankcase) | 1 |
100-3905 Valve Mechanism Gp
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
| 0S***15 | Bolt 19 mm (.75 In.) Long Return Air Console To Enclosed Rops | 1 |
224-9869 Valve Mechanism Gp
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***15 | Bolt 19 mm (.75 In.) Long Return Air Console To Enclosed Rops | 1 |
| 10***77 | Retainer-Spring | 1 |
195-1928 Valve Mechanism Gp
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
| 0S***15 | Bolt 19 mm (.75 In.) Long Return Air Console To Enclosed Rops | 1 |
Cooling System
4w-5409 Core Gp-Oil Cooler
| 4W***09 | Core Group-Oil Cooler | 1 |
| 8L***86 | Seal-O-Ring (Id=16.36mm); (16.36-mm Id) | 1 |
| 9S***85 | Plug--To Seal Hydraulic Pump To Sump Of Limit System | 1 |
3n-2652 Connection Gp-Expansion Tank -Auxiliary
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
| 2N***04 | Flange | 1 |
| 3H***39 | Gasket-Heat Exchanger | 2 |
7w-5848 Connection Gp-Water -Inlet, Rh
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 16 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 24 |
| 1S***72 | Gasket | 2 |
284-1083 Connection Gp-Water -Outlet
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 2 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 12 |
280-2089 Connection Gp-Water -Outlet
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 16 |
| 10***12 | Plate | 2 |
| 11***94 | Cover | 1 |
4p-7072 Connection Gp-Water -Outlet, Lh
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 8 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 8 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 8 |
7w-6372 Connection Gp-Water -Outlet
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 2 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 12 |
8n-9160 Connection Gp-Water -Outlet
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 16 |
| 5M***94 | Washer; Bracket To Tee, Bracket To Block, Tube As. To Tee, Tube As. To Oil Cooler | 8 |
| 7E***16 | Gasket | 4 |
8n-9161 Connection Gp-Water -Outlet
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 2 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 12 |
7n-6965 Connection Gp-Water -Inlet
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 8 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 16 |
8n-8993 Connection Gp-Water -Inlet, Lh
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 16 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 16 |
| 1S***72 | Gasket | 2 |
4w-5893 Cooler Gp-Engine Oil
| 10***32 | Seal-O-Ring | 2 |
| 12***42 | Core As-Oil Cooler; (Engine) | 1 |
| 1A***83 | Bolt (4.75" Long-Location "B") | 3 |
202-0052 Fan Gp-Blower
| 20***52 | Fan Group-Blower | 1 |
| 32***52 | Fan; (8-Blade) | 1 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 6 |
7w-6906 Fan Gp-Blower
| 32***52 | Fan; (8-Blade) | 1 |
| 7W***64 | Adapter-Fan | 1 |
| 7W***06 | Fan Group-Blower | 1 |
7w-5639 Fan Gp-Blower
| 11***83 | Spider As-Fan; (8-Blade) | 1 |
| 7W***39 | Fan Group-Blower | 1 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 6 |
7w-6192 Fan Gp-Blower
| 7W***92 | Fan Group-Blower | 1 |
| 7W***93 | Spider As-Fan; (8-Blade) | 1 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 6 |
9y-4859 Fastener Gp-Radiator
| 20***84 | Bolt; (3/4-10x2.25-In) | 8 |
| 6V***82 | Nut-Full (3/4-10 Thd) | 4 |
| 7C***91 | Bracket; -2 Required | 2 |
9y-7822 Flange Gp-Radiator -Duct
| 5P***16 | Washer; (Hard) (8.8x20.5x2mm Thk) | 36 |
| 6V***89 | Nut-Full (5/16 X 18 Thd) | 12 |
| 7H***37 | Lockwasher, External Tooth (5/16); W/O Freespool Qty Is 0 | 24 |
7n-4885 Switch Gp-Coolant Level
| 03***68 | Elbow (For Use With Shallow Pan) | 3 |
| 2N***68 | Switch-Liquid Level; (Coolant) | 1 |
| 4M***81 | Capscrew; (Hex Hd 1/4-20x3/4) (Use W/Spacer 2) | 2 |
7c-8790 Guard Gp-Radiator
| 4L***54 | Capscrew; (3/8-16x21 In) (Gd8) (Hex Hd) (4-Roller) | 32 |
| 5P***75 | Washer-Hard; (10.2x22.5x3-mm Thk)(Shield To A/C) | 50 |
| 6V***01 | Nut; (3/8-16-Thd)(Plate To Rh And Lh Bracket As) | 18 |
3n-8888 Heat Exchanger Gp-Sea Water
| 0T***20 | Bolt (1.25 In. Long X .438 In. Dia.) | 12 |
| 0T***68 | Bolt,Machine; Tube Mounting And Tube To Junction Block Uoc:Bsv,Bsx | 12 |
| 1H***00 | Pin--To Compression Release Shaft | 1 |
3n-8891 Heat Exchanger Gp-Sea Water
| 2N***63 | Flange | 2 |
| 3N***90 | Heat Exchanger Group | 1 |
| 3N***91 | Heat Exchanger Group | 1 |
3n-8889 Heat Exchanger Gp-Sea Water
| 2N***63 | Flange | 2 |
| 3N***88 | Heat Exchanger Group; Heat Exchanger Group-High Capacity | 1 |
| 3N***89 | Heat Exchanger Group; Heat Exchanger Group-High Capacity | 1 |
3n-8890 Heat Exchanger Gp-Sea Water
| 0T***20 | Bolt (1.25 In. Long X .438 In. Dia.) | 12 |
| 0T***68 | Bolt,Machine; Tube Mounting And Tube To Junction Block Uoc:Bsv,Bsx | 12 |
| 1H***00 | Pin--To Compression Release Shaft | 1 |
4w-4632 Heat Exchanger Gp-Sea Water
| 15***90 | Gasket | 1 |
| 15***91 | Gasket | 1 |
| 15***92 | Seal; (202.6mm Id) | 1 |
3n-8893 Heat Exchanger Gp-Sea Water
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 8 |
| 10***79 | Flange | 2 |
| 1A***63 | Bolt, Hex, Hd., 3/4"-10 N.C. X 2 1/2" | 16 |
107-1730 Heat Exchanger Gp-Sea Water
| 10***78 | Flange; (4-Hole) | 2 |
| 10***79 | Flange | 2 |
| 10***27 | Gasket; (4-Hole) | 2 |
134-3530 Heat Exchanger Gp-Sea Water
| 10***16 | Core As; (Heat Exchanger) | 1 |
| 13***30 | Heat Exchanger Group-Sea Water | 1 |
| 13***73 | Stud | 24 |
134-3533 Heat Exchanger Gp-Sea Water
| 13***33 | Heat Exchanger Group-Sea Water | 1 |
| 15***89 | Core As; (Heat Exchanger) | 1 |
| 15***90 | Gasket | 1 |
4w-4642 Heat Exchanger Gp-Sea Water
| 15***90 | Gasket | 1 |
| 15***91 | Gasket | 1 |
| 15***92 | Seal; (202.6mm Id) | 1 |
4w-4652 Heat Exchanger Gp-Sea Water
| 15***90 | Gasket | 1 |
| 15***91 | Gasket | 1 |
| 15***92 | Seal; (202.6mm Id) | 1 |
107-1729 Heat Exchanger Gp-Sea Water
| 10***78 | Flange; (4-Hole) | 2 |
| 10***79 | Flange | 2 |
| 10***27 | Gasket; (4-Hole) | 2 |
107-1728 Heat Exchanger Gp-Sea Water
| 10***78 | Flange; (4-Hole) | 2 |
| 10***79 | Flange | 2 |
| 10***27 | Gasket; (4-Hole) | 2 |
3n-8892 Heat Exchanger Gp-Sea Water
| 0T***20 | Bolt (1.25 In. Long X .438 In. Dia.) | 12 |
| 0T***68 | Bolt,Machine; Tube Mounting And Tube To Junction Block Uoc:Bsv,Bsx | 12 |
| 1H***00 | Pin--To Compression Release Shaft | 1 |
7c-4135 Housing & Regulator Gp -Outlet Control
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 5 |
| 11***74 | Valve As-Vent Line | 1 |
| 1A***83 | Bolt (4.75" Long-Location "B") | 5 |
8n-9025 Housing & Regulator Gp -Outlet Control
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 5 |
| 1A***83 | Bolt (4.75" Long-Location "B") | 5 |
| 3S***43 | Seal-Lip Type; (Water Temperature Regulator) | 4 |
7e-4711 Housing & Regulator Gp
| 1Y***62 | Washer; (0.328x0.81x0.125-In Thk) | 2 |
| 2H***55 | Bolt 15.88mm(.625in.); 1.59cm(.62in.)Lg. | 2 |
| 4P***05 | Regulator-Water Temperature; (35-Deg C) | 2 |
128-2063 Housing & Regulator Gp -Aftercooler
| 12***62 | Regulator-Water Temperature; (41-Deg C) | 2 |
| 12***63 | Housing & Regulator Group; -Aftercooler | 1 |
| 1Y***62 | Washer; (0.328x0.81x0.125-In Thk) | 2 |
216-6217 Housing & Regulator Gp -Aftercooler
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 4 |
| 21***28 | Housing | 1 |
| 21***29 | Adapter | 1 |
129-2239 Housing & Regulator Gp
| 12***63 | Housing & Regulator Group; -Aftercooler | 1 |
| 12***39 | Housing & Regulator Group | 1 |
123-9346 Idler As
| 12***46 | Idler As | 1 |
| 12***50 | Shaft-Idler | 1 |
| 12***53 | Bearing-Pillow Block | 2 |
5p-9130 Joint As-Tube
| 5P***30 | Joint As-Tube | 1 |
| 9X***40 | Seal; (140.46mm Id) | 2 |
3n-2451 Joint As-Tube
| 3N***51 | Joint As-Tube | 1 |
| 9X***37 | Seal | 2 |
7c-9247 Lines Gp-Auxiliary Fresh Water
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 4 |
7c-9390 Lines Gp-Auxiliary Sea Water
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 1 |
| 14***70 | Clamp | 2 |
7c-9241 Lines Gp-Auxiliary Sea Water
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0V***75 | Screw,Cap,Hexagon H Shaft Mtg,Accessory Drive | 1 |
| 14***70 | Clamp | 2 |
116-9870 Lines Gp-Turbocharger Water
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 12 |
| 10***44 | Block | 4 |
120-7423 Lines Gp-Water -Aftercooler
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 8 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 6 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 1 |
7c-8122 Lines Gp-Water -Bypass
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 3 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 10 |
7c-7831 Lines Gp-Water -Radiator
| 4L***54 | Capscrew; (3/8-16x21 In) (Gd8) (Hex Hd) (4-Roller) | 8 |
| 5P***68 | Clamp-Hose; (Us Sourced) | 8 |
| 6V***35 | Seal-O-Ring | 1 |
107-0476 Lines Gp-Water -Upper
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 19 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 30 |
| 10***76 | Lines Group-Water; -Upper | 1 |
7c-9330 Lines Gp-Water -Transmission Cooling
| 3N***16 | Hose Assem. 52 In.(132.08 cm) | 2 |
| 5M***94 | Washer; Bracket To Tee, Bracket To Block, Tube As. To Tee, Tube As. To Oil Cooler | 8 |
| 5N***68 | Pipe | 1 |
9y-9173 Lines Gp-Water -Bypass
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 3 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
8n-7719 Lines Gp-Water -Bypass
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 3 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 16 |
7w-6515 Lines Gp-Water -Connection
| 5P***98 | Clamp-Assemble One Each To Valve As | 4 |
| 7W***14 | Hose | 1 |
| 7W***15 | Lines Group-Water; -Connection | 1 |
122-3157 Lines Gp-Water
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 6 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 10 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
115-7849 Lines Gp-Water -Lower
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
| 11***48 | Plate-Cover | 1 |
120-9917 Lines Gp-Water -Aftercooler Vent
| 11***61 | Tube As | 1 |
| 12***17 | Lines Group-Water; -Aftercooler Vent | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 2 |
135-1071 Lines Gp-Water -Upper
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 19 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 30 |
| 11***76 | Manifold; (Rear, Lh) | 1 |
7w-6513 Lines Gp-Water -Connection
| 21***97 | Hose | 1 |
| 5P***99 | Clamp; (Hose) | 4 |
| 7W***13 | Lines Group-Water; -Connection | 1 |
9y-8234 Mounting Gp-Radiator
| 15***65 | Mount As | 2 |
| 5P***97 | Washer; (17x45x6-mm Thk) | 2 |
| 9Y***34 | Mounting Group-Radiator | 1 |
318-9126 Plate-Spacer
| 31***26 | Plate-Spacer | 1 |
5n-5757 Pump Gp-Auxiliary Sea Water
| 10***18 | Plug | 1 |
| 10***10 | Bolt-High Temperature; (7/16-14x1.00 In) | 4 |
| 1B***13 | Bolt,Machine Governor And Decelerator Control | 2 |
5n-2605 Pump Gp-Auxiliary Water
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 7 |
4w-6674 Pump Gp-Auxiliary Sea Water
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 9 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
7c-3614 Pump Gp-Auxiliary Sea Water
| 10***18 | Plug | 1 |
| 10***10 | Bolt-High Temperature; (7/16-14x1.00 In) | 4 |
| 10***65 | Circlip | 1 |
4w-6673 Pump Gp-Auxiliary Sea Water
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 4 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 9 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 6 |
7e-9781 Pump Gp-Auxiliary Water
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 12***00 | Bearing-Sleeve | 1 |
315-5137 Pump Gp-Auxiliary Sea Water
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 2 |
| 1N***99 | Plug-O-Ring; (Straight Thread) | 1 |
148-8000 Pump Gp-Auxiliary Sea Water
| 10***18 | Plug | 3 |
| 10***65 | Circlip | 1 |
| 14***69 | Seal | 1 |
8n-8466 Pump Gp-Auxiliary Sea Water
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
144-6081 Pump Gp-Auxiliary Sea Water
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 4 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 8 |
| 14***07 | Elbow | 1 |
144-6080 Pump Gp-Auxiliary Sea Water
| 14***80 | Pump Group-Auxiliary Sea Water | 1 |
| 14***96 | Gasket | 1 |
| 14***97 | Hose As | 1 |
291-4313 Pump Gp-Auxiliary Water -Fresh Water
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 12***00 | Bearing-Sleeve | 1 |
| 21***79 | Shaft; (14-Teeth) | 1 |
9y-8175 Pump Gp-Auxiliary Water
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 7 |
| 1T***65 | Bolt 2.54 cm (1" Long) | 1 |
| 21***66 | Pump Group-Auxiliary Water | 1 |
212-8166 Pump Gp-Auxiliary Water
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 4 |
| 12***00 | Bearing-Sleeve | 1 |
| 21***66 | Pump Group-Auxiliary Water | 1 |
7e-9782 Pump Gp-Auxiliary Water
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 4 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 12***00 | Bearing-Sleeve | 1 |
212-8169 Pump Gp-Auxiliary Water -Fresh Water
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 12***00 | Bearing-Sleeve | 1 |
| 21***69 | Pump Group-Auxiliary Water; -Fresh Water | 1 |
291-4311 Pump Gp-Auxiliary Water
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 4 |
| 12***00 | Bearing-Sleeve | 1 |
| 21***79 | Shaft; (14-Teeth) | 1 |
166-4377 Pump Gp-Water
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 2 |
| 16***74 | Ring As | 1 |
| 16***76 | Seal Group-Water Pump; (Face Type) | 1 |
212-8176 Pump Gp-Water
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 2 |
| 16***74 | Ring As | 1 |
| 16***76 | Seal Group-Water Pump; (Face Type) | 1 |
122-0501 Pump Gp-Water
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 2 |
| 12***01 | Pump Group-Water | 1 |
| 12***45 | Seal Group-Face; (Water Pump) | 1 |
2w-9726 Pump Gp-Water
| 14***62 | Seal-O-Ring | 1 |
| 21***76 | Pump Group-Water | 1 |
| 22***53 | Kit-Rebuild; (Water Pump) | 0 |
120-9504 Radiator & Fan Gp
| 11***09 | Fan As; (Blower, 7-Blade Or 11-Blade) | 1 |
| 12***04 | Radiator & Fan Group | 1 |
| 12***02 | Core As; (Radiator) | 4 |
120-9113 Radiator & Fan Gp
| 11***09 | Fan As; (Blower, 7-Blade Or 11-Blade) | 1 |
| 12***13 | Radiator & Fan Group | 1 |
| 12***46 | Idler As | 1 |
120-9119 Radiator & Fan Gp
| 12***13 | Radiator & Fan Group | 1 |
| 12***19 | Radiator & Fan Group | 1 |
| 12***78 | Bracket | 2 |
120-9114 Radiator & Fan Gp
| 11***91 | Strap-Corewasher | 8 |
| 12***14 | Radiator & Fan Group | 1 |
| 12***16 | Gauge-Sight; (Coolant Level) | 1 |
120-9109 Radiator & Fan Gp
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 20 |
| 0L***32 | Bolt (3" Long) | 6 |
| 11***91 | Strap-Corewasher | 8 |
120-9122 Radiator & Fan Gp
| 11***09 | Fan As; (Blower, 7-Blade Or 11-Blade) | 1 |
| 12***22 | Radiator & Fan Group | 1 |
| 12***45 | Sheave | 1 |
120-9121 Radiator & Fan Gp
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 5 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 12 |
120-9110 Radiator & Fan Gp
| 12***09 | Radiator & Fan Group | 1 |
| 12***10 | Radiator & Fan Group | 1 |
| 12***78 | Bracket | 2 |
120-9123 Radiator & Fan Gp
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 5 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 12 |
120-9124 Radiator & Fan Gp
| 11***09 | Fan As; (Blower, 7-Blade Or 11-Blade) | 1 |
| 12***24 | Radiator & Fan Group | 1 |
| 12***45 | Sheave | 1 |
120-9120 Radiator & Fan Gp
| 11***09 | Fan As; (Blower, 7-Blade Or 11-Blade) | 1 |
| 12***20 | Radiator & Fan Group | 1 |
| 12***02 | Core As; (Radiator) | 4 |
120-9503 Radiator & Fan Gp
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 5 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 12 |
124-4619 Radiator Gp
| 12***78 | Bracket | 2 |
| 12***28 | Radiator Group | 1 |
| 12***19 | Radiator Group | 1 |
124-2628 Radiator Gp
| 12***05 | Radiator Group | 1 |
| 12***78 | Bracket | 2 |
| 12***28 | Radiator Group | 1 |
124-2629 Radiator Gp
| 03***32 | Strap--Harness Assembly To Compressor | 3 |
| 11***88 | Orifice | 1 |
| 11***91 | Strap-Corewasher | 12 |
127-1535 Radiator Gp
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 5 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 12 |
120-9506 Radiator Gp
| 03***32 | Strap--Harness Assembly To Compressor | 3 |
| 12***06 | Radiator Group | 1 |
| 12***05 | Tube | 1 |
127-1545 Radiator Gp
| 12***05 | Tube | 1 |
| 12***23 | Tube | 1 |
| 12***24 | Tube | 1 |
127-1544 Radiator Gp
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 5 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 12 |
127-1536 Radiator Gp
| 03***32 | Strap--Harness Assembly To Compressor | 3 |
| 12***05 | Seal | 1 |
| 12***07 | Plate | 1 |
120-9505 Radiator Gp
| 12***05 | Radiator Group | 1 |
| 1F***50 | Nut Rops Support | 11 |
| 20***84 | Bolt; (3/4-10x2.25-In) | 8 |
9y-6676 Radiator Gp
| 15***53 | Brace As | 2 |
| 4M***25 | B. 5/16 N.C. X 1" | 260 |
| 5P***20 | Hose (Radiator Overflow) 125cm (49.213in) | 0 |
9y-6675 Radiator Gp
| 12***03 | Radiator & Fan Group | 1 |
| 12***78 | Bracket | 2 |
| 12***13 | Flange | 1 |
124-4620 Radiator Gp
| 03***32 | Strap--Harness Assembly To Compressor | 3 |
| 11***91 | Strap-Corewasher | 8 |
| 11***96 | Bracket | 1 |
127-1538 Radiator Gp
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 5 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 12 |
127-1539 Radiator Gp
| 11***88 | Orifice | 1 |
| 11***91 | Strap-Corewasher | 8 |
| 11***92 | Gasket | 8 |
9y-9171 Housing & Regulator Gp -Outlet Control
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 11***74 | Valve As-Vent Line | 1 |
| 24***13 | Regulator-Water Temperature; (92-Deg C)(Water, Coolant Temperature) | 4 |
116-7002 Regulator Gp-Temperature -Aftercooler
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 5 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 12 |
8n-7643 Housing & Regulator Gp -Inlet Control
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 5 |
| 10***12 | Plate | 2 |
| 1A***83 | Bolt (4.75" Long-Location "B") | 5 |
9y-9220 Housing & Regulator Gp -Outlet Control
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 11***74 | Valve As-Vent Line | 1 |
| 24***13 | Regulator-Water Temperature; (92-Deg C)(Water, Coolant Temperature) | 4 |
7c-8124 Housing & Regulator Gp -Outlet
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 11***74 | Valve As-Vent Line | 1 |
| 24***13 | Regulator-Water Temperature; (92-Deg C)(Water, Coolant Temperature) | 4 |
4p-5767 Separator Gp-Air
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 11***01 | Tube | 1 |
| 21***31 | Bracket | 1 |
137-5560 Switch Gp-Coolant Level
| 03***68 | Elbow (For Use With Shallow Pan) | 1 |
| 12***81 | Support As | 1 |
| 13***60 | Switch Group-Coolant Level | 1 |
9y-7695 Switch Gp-Coolant Level
| 2A***62 | Screw,Cap,Hexagon H Diode Pig Tail To Grd; (1/4-20x.625 In) | 2 |
| 2N***68 | Switch-Liquid Level; (Coolant) | 1 |
| 3N***22 | Hose Assem. 29.6 cm(11.65 In.) | 2 |
121-2480 Switch Gp-Coolant Level
| 03***68 | Elbow (For Use With Shallow Pan) | 3 |
| 12***80 | Switch Group-Coolant Level | 1 |
| 12***81 | Support As | 1 |
121-2479 Switch Gp-Coolant Level
| 03***68 | Elbow (For Use With Shallow Pan) | 3 |
| 11***57 | Hose As | 2 |
| 11***58 | Support As | 1 |
7e-9267 Switch Gp-Coolant Level
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 4 |
| 1A***22 | Bolt-Generator To Flywheel Housing | 1 |
110-5959 Switch Gp-Coolant Level
| 03***68 | Elbow (For Use With Shallow Pan) | 3 |
| 11***59 | Switch Group-Coolant Level | 1 |
| 22***13 | Plate | 1 |
8n-7717 Tank Gp-Expansion
| 00***98 | Elbow (For Use With Deep Pan) | 1 |
| 03***68 | Elbow (For Use With Shallow Pan) | 2 |
| 11***57 | Hose As | 1 |
148-8005 Valve Gp-Check -Auxiliary Water Pump
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 6 |
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 4 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 8 |
137-1942 Valve Gp-Radiator Drain
| 13***42 | Valve Group-Radiator Drain | 1 |
| 14***01 | Body-Valve | 1 |
| 14***02 | Retainer | 1 |
137-1943 Valve Gp-Radiator Drain
| 13***43 | Valve Group-Radiator Drain | 1 |
| 3B***49 | Fitting; (Nipple) (1-11-1/2 Npt Thd) | 1 |
| 4P***17 | Valve-Ball; (Jacket Water Heater) | 1 |
Electrical And Starting System
266-7227 Alternator Gp-Charging
| 24***03 | Nut-Clinch | 2 |
| 25***20 | Cover | 1 |
| 25***22 | Cover | 1 |
333-1184 Alternator Gp-Charging
| 33***84 | Alternator Group-Charging | 1 |
| 4N***86 | Alternator Group-Charging; (24-Volt, 60-Ampere)(24-Volt, 60-Ampere) | 1 |
4n-3986 Alternator Gp-Charging
| 23***60 | Tape; -Anti-Splash | 0 |
| 4N***86 | Alternator Group-Charging; (24-Volt, 60-Ampere)(24-Volt, 60-Ampere) | 1 |
7e-2858 Alternator Gp-Charging
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 13***51 | Spacer; (11x19x6-mm Thk) | 1 |
331-5717 Alternator Gp-Charging
| 10***31 | Fan-Alternator; (11-Blade) | 1 |
| 10***32 | Collar; (Alternator) | 1 |
| 10***62 | Kit-Alternator Terminal | 1 |
7c-3874 Battery Charger
| 10***31 | Fan-Alternator; (11-Blade) | 1 |
| 18***34 | Nut-Flange; (5/8-18-Thd) | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 1 |
7l-7871 Battery Gp
| 10***31 | Fan-Alternator; (11-Blade) | 1 |
| 18***34 | Nut-Flange; (5/8-18-Thd) | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 1 |
134-6291 Box & Mounting Gp
| 11***63 | Enclosure Group-Wiring | 1 |
| 13***91 | Box & Mounting Group | 1 |
| 1V***53 | Spacer; (0.546x0.841x1.75-In Thk) | 4 |
133-6463 Box & Mounting Gp
| 13***63 | Box & Mounting Group | 1 |
| 1M***19 | Bolt; (5/16-18x1.375-In)(5/16-18x1.375 In) | 2 |
| 1M***20 | Nut-Battery Terminal (5/16-18 Thd); (5/16-18-Thd)(5/16-18x1.375 In) | 2 |
115-5164 Box & Mounting Gp -Power Distribution
| 11***64 | Box & Mounting Group; -Power Distribution | 1 |
134-6327 Box Gp-Electronic
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 3 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 3 |
141-1808 Box Gp-Generator Connection
| 03***45 | Reducer-Flared | 2 |
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 8 |
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 4 |
131-9099 Box Gp-Junction
| 03***45 | Reducer-Flared | 2 |
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 8 |
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 4 |
228-6559 Cable As-Communication
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 6 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 18 |
| 0S***16 | Screw,Cap,Hexagon H Receptacle Mtg; Bolt Brackets To Firewall Assembly | 2 |
7w-0825 Cable Gp-Battery
| 13***21 | Box As | 1 |
| 13***22 | Circuit Breaker As; (63-Ampere) | 1 |
| 13***23 | Circuit Breaker As; (40-Ampere) | 1 |
125-7096 Circuit Breaker As
| 12***96 | Circuit Breaker As | 1 |
| 13***21 | Box As | 1 |
| 13***22 | Circuit Breaker As; (63-Ampere) | 1 |
131-9133 Connection Gp-Electrical -Alternator
| 13***33 | Connection Group-Electrical; -Alternator | 1 |
| 17***00 | Strip Group-Terminal; -Main | 1 |
| 4F***57 | Screw,Cap,Hexagon H Shock Mount To Bracket | 2 |
131-9135 Connection Gp-Electrical -Air Start
| 12***38 | Connection Group-Electrical; -Basic | 1 |
| 13***35 | Connection Group-Electrical; -Air Start | 1 |
| 17***95 | Strip Group-Terminal; -Thermocouple | 1 |
121-9639 Connection Gp-Electrical -Thermocouple
| 12***39 | Connection Group-Electrical; -Thermocouple | 1 |
| 1M***19 | Bolt; (5/16-18x1.375-In)(5/16-18x1.375 In) | 2 |
| 1M***20 | Nut-Battery Terminal (5/16-18 Thd); (5/16-18-Thd)(5/16-18x1.375 In) | 1 |
131-9137 Connection Gp-Electrical -Single Electric Start
| 13***36 | Circuit Breaker As; (6-Ampere) | 1 |
| 13***37 | Connection Group-Electrical; -Single Electric Start | 1 |
| 13***15 | Harness As; (Air Start) | 1 |
131-9138 Connection Gp-Electrical -Dual Electric Start
| 13***22 | Circuit Breaker As; (63-Ampere) | 1 |
| 13***38 | Connection Group-Electrical; -Dual Electric Start | 1 |
| 13***20 | Wire As | 1 |
131-9139 Connection Gp-Electrical -Prelubrication
| 13***39 | Connection Group-Electrical; -Prelubrication | 1 |
| 13***96 | Circuit Breaker As; (32-Ampere)(32 Ampere) | 1 |
| 19***26 | Harness As-Panel; (Single Electric Start) | 1 |
133-6455 Connection Gp-Electrical -Either Starting Aid
| 13***55 | Connection Group-Electrical; -Either Starting Aid | 1 |
| 13***96 | Circuit Breaker As; (32-Ampere)(32 Ampere) | 2 |
| 19***27 | Harness As; (Dual Electric Start) | 1 |
133-6453 Connection Gp-Electrical -Air Shutoff
| 13***22 | Circuit Breaker As; (63-Ampere) | 2 |
| 13***53 | Connection Group-Electrical; -Air Shutoff | 1 |
| 13***21 | Harness As-Panel; (Magnetic Switch) | 1 |
121-9638 Connection Gp-Electrical -Basic
| 12***38 | Connection Group-Electrical; -Basic | 1 |
121-9640 Connection Gp-Electrical -Rtd
| 12***40 | Connection Group-Electrical; -Rtd | 1 |
4w-2768 Contactor Gp
| 13***54 | Circuit Breaker As; (32-Ampere) | 1 |
| 13***16 | Harness As-Panel; (Air Shutoff) | 1 |
| 14***17 | Harness As-Wiring; (Relay) | 1 |
4w-2767 Contactor Gp
| 13***40 | Circuit Breaker As; (40-Ampere) | 1 |
| 13***18 | Harness As-Panel; (Prelubrication) | 1 |
| 14***11 | Harness As | 1 |
4w-2641 Contactor-Pressure
| 13***56 | Circuit Breaker As; (20-Ampere) | 1 |
| 2L***79 | Terminal-Ring; (14-Ga To 16-Ga, 3/8-In Screw)(For 3/8-In Screw) | 2 |
| 3B***01 | Lockwasher (Part Of 3f***99 Switch) | 2 |
4w-2642 Contactor-Pressure
| 4W***37 | Contactor-Temperature; -Coolant-Alarm | 1 |
| 4W***42 | Contactor-Pressure; (Engine) | 2 |
4w-2637 Contactor-Temperature -Coolant
| 4W***37 | Contactor-Temperature; -Coolant-Alarm | 1 |
| 4W***40 | Contactor-Temperature; -Coolant-Shutoff | 1 |
| 4W***41 | Contactor-Pressure; (Shutdown) | 1 |
4w-2640 Contactor-Temperature -Coolant
| 4W***40 | Contactor-Temperature; -Coolant-Shutoff | 1 |
101-1172 Control & Mtg Gp-Engine Elek -Primary
| 10***72 | Control & Mtg Group-Engine Elek; -Primary | 1 |
| 7E***27 | Kit-Sensor Pocket; -Temperature Contactor | 1 |
7c-0330 Control Gp-Air Starting
| 7C***30 | Control Group-Air Starting | 1 |
| 7E***27 | Kit-Sensor Pocket; -Temperature Contactor | 1 |
256-7512 Control Gp-Communication -Pl1000e
| 11***49 | Bracket-Module | 1 |
| 11***87 | Elbow | 2 |
| 13***00 | Control Group-Engine Electronic; -Rear Ecm-Front Ecm | 1 |
256-7511 Control Gp-Communication -Pl1000t
| 11***49 | Bracket-Module | 1 |
| 11***87 | Elbow | 2 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 7 |
183-5050 Control Gp-Eng Ratings Elek
| 18***50 | Control Group-Eng Ratings Elek | 1 |
185-2978 Control Gp-Eng Ratings Elek
| 18***78 | Control Group-Eng Ratings Elek | 1 |
183-5052 Control Gp-Eng Ratings Elek
| 18***52 | Control Group-Eng Ratings Elek | 1 |
138-1334 Control Gp-Eng Ratings Elek
| 13***34 | Control Group-Eng Ratings Elek | 1 |
| 33***85 | Film-Warning; (Csa Control Panel Approval) | 1 |
153-3041 Control Gp-Eng Ratings Elek
| 15***41 | Control Group-Eng Ratings Elek | 1 |
143-7571 Control Gp-Eng Ratings Elek
| 14***71 | Control Group-Eng Ratings Elek | 1 |
| 33***85 | Film-Warning; (Csa Control Panel Approval) | 1 |
154-8114 Control Gp-Eng Ratings Elek
| 15***14 | Control Group-Eng Ratings Elek | 1 |
176-6157 Control Gp-Eng Ratings Elek
| 17***57 | Control Group-Eng Ratings Elek | 1 |
185-2974 Control Gp-Eng Ratings Elek
| 18***74 | Control Group-Eng Ratings Elek | 1 |
144-8723 Control Gp-Eng Ratings Elek
| 14***23 | Control Group-Eng Ratings Elek | 1 |
183-5058 Control Gp-Eng Ratings Elek
| 18***58 | Control Group-Eng Ratings Elek | 1 |
148-1962 Control Gp-Eng Ratings Elek
| 14***62 | Control Group-Eng Ratings Elek | 1 |
149-6147 Control Gp-Eng Ratings Elek
| 14***47 | Control Group-Eng Ratings Elek | 1 |
183-5054 Control Gp-Eng Ratings Elek
| 18***54 | Control Group-Eng Ratings Elek | 1 |
183-5048 Control Gp-Eng Ratings Elek
| 18***48 | Control Group-Eng Ratings Elek | 1 |
144-8721 Control Gp-Eng Ratings Elek
| 14***21 | Control Group-Eng Ratings Elek | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 2 |
176-7503 Control Gp-Engine Electronic
| 11***44 | Seal | 1 |
| 11***45 | Plug As-Connector; (40-Pin) | 1 |
| 12***08 | Control Group-Engine Monitoring | 1 |
133-9300 Control Gp-Engine Electronic -Relay
| 10***87 | Bolt; (M5x0.8x12-mm) | 4 |
| 11***11 | Cover | 1 |
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
126-5531 Control Gp-Engine Electronic -Interface Block
| 12***31 | Control Group-Engine Electronic; -Interface Block | 1 |
132-8900 Control Gp-Engine Electronic
| 13***00 | Control Group-Engine Electronic; -Rear Ecm-Front Ecm | 1 |
130-7481 Control Gp-Engine Electronic
| 13***81 | Control Group-Engine Electronic; -Personality Module | 1 |
9x-3207 Control Gp-Electronic
| 2V***56 | Hose Assem. 53.4 cm (21.02 In.) | 1 |
| 4M***17 | Bushing-Reducing; (For Use With Ta Exhaust Man.) | 1 |
| 5F***34 | Valve As-Vent; (Governor Air Compressor) | 1 |
122-3156 Conversion Ar
| 11***45 | Plug As-Connector; (40-Pin) | 1 |
| 12***56 | Conversion Ar | 1 |
| 14***24 | Control Group-Engine Monitoring; -Programmable Relay Control Module | 1 |
166-4373 Conversion Gp-Wiring
| 10***87 | Bolt; (M5x0.8x12-mm) | 4 |
| 11***11 | Cover | 1 |
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
228-7317 Conversion Gp-Wiring
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 22***17 | Conversion Group-Wiring | 1 |
228-7318 Conversion Gp-Wiring
| 10***78 | Cover Group-Front Housing | 1 |
| 11***49 | Lines Group-Water; -Lower | 1 |
| 12***57 | Lines Group-Water | 1 |
9x-9591 Converter Gp-Electrical
| 10***56 | Strap-Cable | 1 |
| 12***89 | Clip | 1 |
| 13***78 | Strap-Cable | 1 |
7c-2668 Diode As
| 22***21 | Wire As | 1 |
| 22***22 | Diode As | 1 |
| 22***24 | Tag | 1 |
173-6012 Electronics Gp-Engine Ratings
| 17***12 | Electronics Group-Engine Ratings | 1 |
| 22***19 | Wire As | 1 |
| 22***22 | Diode As | 1 |
173-6013 Electronics Gp-Engine Ratings
| 17***13 | Electronics Group-Engine Ratings | 1 |
| 3K***06 | Screw-Machine-Relay To Bracket | 2 |
| 4B***63 | Washer; (4.7x11x1.2-mm Thk) | 2 |
115-5163 Enclosure Gp-Wiring
| 11***63 | Enclosure Group-Wiring | 1 |
128-1480 Frame Gp-Generator Connection
| 12***80 | Frame Group-Generator Connection | 1 |
126-9191 Ground Gp-Electrical -Alternator
| 06***88 | Locknut; (1-11-1/2-Thd) | 1 |
| 11***61 | Bracket As | 1 |
| 12***91 | Ground Group-Electrical; -Alternator | 1 |
120-9830 Harness As-Box
| 12***30 | Harness As-Box | 1 |
120-9825 Harness As-Box
| 10***49 | Locknut; (1-1/4-11-1/2 Nptf-Thd) | 1 |
| 11***61 | Bracket As | 1 |
| 12***25 | Harness As-Box | 1 |
120-9829 Harness As-Box
120-9827 Harness As-Box
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 12***27 | Harness As-Box | 1 |
| 12***87 | Mount-Flexible | 1 |
126-4405 Harness As-Box
| 12***05 | Harness As-Box | 1 |
270-1732 Harness As-Control -Pl1000t
| 27***32 | Harness As-Control; -Pl1000t | 1 |
276-0785 Harness As-Control -Pl1000e
| 27***85 | Harness As-Control; -Pl1000e | 1 |
159-1198 Harness As-Engine
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 11 |
| 10***07 | Kit-Connecting Plug; (2-Pin)(Electronic Control) | 14 |
132-8267 Harness As-Engine
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
132-8268 Harness As-Engine
| 13***68 | Harness As-Engine | 1 |
127-5401 Harness As-Engine
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
150-4162 Harness As-Monitor -Pyrometer
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 11 |
| 10***07 | Kit-Connecting Plug; (2-Pin)(Electronic Control) | 14 |
199-5586 Harness As-Monitor -Pyrometer
| 03***97 | Boot | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 5 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 11 |
202-2137 Harness As-Monitor -Pyrometer
| 20***37 | Harness As-Monitor; -Pyrometer | 1 |
141-0719 Harness As-Panel
| 14***19 | Harness As-Panel | 1 |
141-0720 Harness As-Panel
| 14***20 | Harness As-Panel | 1 |
143-5176 Harness As-Panel
| 14***76 | Harness As-Panel; (Generator Instrument) | 1 |
121-4113 Harness As-Panel -Pyrometer Interconnect
| 12***13 | Harness As-Panel; -Pyrometer Interconnect | 1 |
121-4112 Harness As-Panel -Pyrometer Interconnect
| 12***12 | Harness As-Panel; -Pyrometer Interconnect | 1 |
141-0716 Harness As-Panel -Interconnect
| 14***16 | Harness As-Panel; -Interconnect | 1 |
141-0717 Harness As-Panel -Interconnect
| 14***17 | Harness As-Panel; -Interconnect | 1 |
150-4149 Harness As-Panel -Interconnect
| 15***49 | Harness As-Panel; -Interconnect | 1 |
174-1436 Harness As-Panel -Instrument
| 17***36 | Harness As-Panel; -Instrument | 1 |
133-9009 Harness As-Panel
| 13***09 | Harness As-Panel | 1 |
133-9011 Harness As-Panel
| 13***11 | Harness As-Panel | 1 |
139-8529 Harness As-Panel -Interconnect
| 13***29 | Harness As-Panel; -Interconnect | 1 |
133-9010 Harness As-Panel
| 13***10 | Harness As-Panel | 1 |
121-4111 Harness As-Panel -Pyrometer Interconnect
| 12***11 | Harness As-Panel; -Pyrometer Interconnect | 1 |
121-4110 Harness As-Panel -Pyrometer Interconnect
| 12***10 | Harness As-Panel; -Pyrometer Interconnect | 1 |
282-0917 Harness As-Panel -Product Link
| 28***17 | Harness As-Panel; -Product Link | 1 |
150-4150 Harness As-Panel -Interconnect
| 10***11 | Plug Kit; (Includes Plug Assem. And Wedge) | 1 |
| 10***16 | Seal-Interface | 1 |
| 15***50 | Harness As-Panel; -Interconnect | 1 |
133-9008 Harness As-Panel
| 13***08 | Harness As-Panel | 1 |
242-9752 Harness As-Power -Digital Voltage Regulator
| 10***38 | End-Wire; (16-Ga) | 49 |
| 11***97 | End-Wire; (14-Ga) | 10 |
| 12***10 | End-Wire; (14-Ga) | 15 |
151-9266 Harness As-Sensor -Oil Filter Pressure
| 15***66 | Harness As-Sensor; -Oil Filter Pressure | 1 |
125-7088 Harness As-Sensor -Extension, Filter
| 10***38 | End-Wire; (16-Ga) | 10 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***88 | Harness As-Sensor; -Extension, Filter | 1 |
151-9265 Harness As-Sensor -Fuel Filter Pressure
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***67 | Terminal As-Ring | 2 |
| 15***65 | Harness As-Sensor; -Fuel Filter Pressure | 1 |
129-2261 Harness As-Wiring
| 12***61 | Harness As-Wiring | 1 |
143-5163 Harness As-Wiring -Jumper
| 14***63 | Harness As-Wiring; -Jumper | 1 |
242-3104 Harness As-Wiring -Generator Terminal Strip
| 24***04 | Harness As-Wiring; -Generator Terminal Strip | 1 |
129-2260 Harness As-Wiring
| 12***60 | Harness As-Wiring | 1 |
120-4486 Harness Gp-Wiring -Air Shutoff
| 12***86 | Harness Group-Wiring; -Air Shutoff | 1 |
120-4487 Harness Gp-Wiring -Alternator Circuit Breaker
| 10***38 | End-Wire; (16-Ga) | 22 |
| 12***87 | Harness Group-Wiring; -Alternator Circuit Breaker | 1 |
| 13***40 | Resistor As-Connection; (3-Pin) | 1 |
134-6321 Harness Gp-Wiring -Denox Aftertreatment
| 13***21 | Harness Group-Wiring; -Denox Aftertreatment | 1 |
120-4489 Harness Gp-Wiring -Speed Control
| 12***89 | Harness Group-Wiring; -Speed Control | 1 |
| 9X***07 | Control Group-Ether Electronic; (Auto Ether Pull In) | 1 |
7e-6247 Heater Gp-Jacket Water
| 11***42 | Circuit Breaker As; (10-Ampere) | 1 |
| 13***22 | Harness As-Wiring; (Denox) | 1 |
| 4B***63 | Washer; (4.7x11x1.2-mm Thk) | 2 |
200-6504 Heater Gp-Jacket Water
| 12***60 | Thermostat As; (20-Deg C To 80-Deg C)(Jacket Water Heater) | 1 |
| 20***04 | Heater Group-Jacket Water | 1 |
7e-6248 Heater Gp-Jacket Water
| 10***32 | Thermostat; (60 Deg F To 160 Deg F)(Jacket Water Heater) | 1 |
| 7E***48 | Heater Group-Jacket Water | 1 |
207-4476 Lines Gp-Air Starting -Rh
| 03***61 | Elbow; (45 Degree) | 1 |
| 11***84 | Lubricator Group-Air Motor | 1 |
| 20***76 | Lines Group-Air Starting; -Rh | 1 |
7w-9269 Lines Gp-Air Starting -Rh
| 12***60 | Thermostat As; (20-Deg C To 80-Deg C)(Jacket Water Heater) | 1 |
| 7W***69 | Lines Group-Air Starting; -Rh - 0 & 00 | 1 |
119-6284 Lubricator Gp-Air Motor
| 11***84 | Lubricator Group-Air Motor | 1 |
| 6N***84 | Gasket | 1 |
| 6N***85 | Plug-Filler | 2 |
119-6283 Lubricator Gp-Air Motor
| 03***61 | Elbow; (45 Degree) | 1 |
| 11***83 | Lubricator Group-Air Motor; Lubrication Gp-Air Motor | 1 |
| 11***84 | Lubricator Group-Air Motor | 1 |
119-6282 Lubricator Gp-Air Motor
| 03***61 | Elbow; (45 Degree) | 1 |
| 11***82 | Lubricator Group-Air Motor; Lubrication Gp-Air Motor | 1 |
| 11***84 | Lubricator Group-Air Motor | 1 |
105-3255 Mounting Gp-Circuit Breaker
| 10***55 | Mounting Group-Circuit Breaker | 1 |
137-5543 Mounting Gp-Contactor -Shutoff
| 03***46 | Elbow, 90 Deg Adj., 1/4in. J.I.C. X 7/16in.-14 Str. Thd. | 1 |
| 03***42 | Seal-O-Ring; (11.89mm Id) | 1 |
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
127-8124 Mounting Gp-Contactor -Alarm Or Shutoff
| 03***41 | Elbow; (7/16-20 Str Thd) | 1 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 7 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 2 |
133-6476 Mounting Gp-Contactor -Alarm
| 03***41 | Elbow; (7/16-20 Str Thd) | 1 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 2 |
7e-6469 Mounting Gp-Contactor -Alarm Or Shutoff
| 11***82 | Lubricator Group-Air Motor; Lubrication Gp-Air Motor | 1 |
| 11***83 | Lubricator Group-Air Motor; Lubrication Gp-Air Motor | 1 |
| 7E***69 | Mounting Group-Contactor; -Alarm Or Shutoff | 1 |
134-6335 Mounting Gp-Contactor -Alarm
| 03***46 | Elbow, 90 Deg Adj., 1/4in. J.I.C. X 7/16in.-14 Str. Thd. | 1 |
| 03***42 | Seal-O-Ring; (11.89mm Id) | 1 |
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 1 |
231-9526 Mounting Gp-Contactor
| 03***41 | Elbow; (7/16-20 Str Thd) | 1 |
| 03***42 | Seal-O-Ring; (11.89mm Id) | 1 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
232-0858 Mounting Gp-Contactor
| 03***41 | Elbow; (7/16-20 Str Thd) | 1 |
| 03***42 | Seal-O-Ring; (11.89mm Id) | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 8 |
127-8123 Mounting Gp-Contactor -Alarm Or Shutoff
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 2 |
| 12***23 | Mounting Group-Contactor; -Alarm Or Shutoff | 1 |
| 4W***49 | Spacer; (10.5x19x16.75-mm Thk) | 2 |
133-6464 Mounting Gp-Contactor -Alarm
| 03***41 | Elbow; (7/16-20 Str Thd) | 1 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 2 |
| 0T***02 | Bolt; (3/8-16x0.625-In)(Shield To Head) | 7 |
133-6477 Mounting Gp-Contactor -Alarm
| 03***41 | Elbow; (7/16-20 Str Thd) | 1 |
| 03***42 | Seal-O-Ring; (11.89mm Id) | 1 |
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 1 |
136-9728 Mounting Gp-Jacket Wtr Heater -Rh
| 00***70 | Nipple-Strainer To Flange | 1 |
| 03***07 | Connector; (Flared) | 1 |
| 03***28 | Clip; (31.8mm Id) | 2 |
150-4219 Mounting Gp-Jacket Wtr Heater -Rh
6i-1040 Mounting Gp-Jacket Wtr Heater -Rh
| 00***35 | Elbow-External Pipe Thread | 1 |
| 05***58 | "P" Clip | 2 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 1 |
166-6654 Mounting Gp-Jacket Wtr Heater -Rh
136-9729 Mounting Gp-Jacket Wtr Heater -Lh
| 00***70 | Nipple-Strainer To Flange | 1 |
| 03***07 | Connector; (Flared) | 1 |
| 03***28 | Clip; (31.8mm Id) | 2 |
150-4218 Mounting Gp-Jacket Wtr Heater -Lh
124-0058 Mounting Gp-Jacket Wtr Heater -Rh
| 03***28 | Clip; (31.8mm Id) | 2 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 2 |
| 12***58 | Mounting Group-Jacket Wtr Heater; -Rh | 1 |
6i-1039 Mounting Gp-Jacket Wtr Heater -Lh
| 03***41 | Elbow; (7/16-20 Str Thd) | 1 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 3 |
266-1522 Mounting Gp-Jacket Wtr Heater -Lh
141-1810 Mounting Gp-Transformer
291-0974 Protection Gp-Engine
264-3074 Protection Gp-Engine
175-5042 Relay Gp
| 17***42 | Relay Group | 1 |
| 23***60 | Tape; -Anti-Splash | 1 |
174-1439 Relay Gp
163-1462 Sensor & Mtg Gp-Electric -Coolant
| 11***23 | Block-Contact; (1-Pole)(Normally Open) | 1 |
| 16***62 | Sensor & Mtg Group-Electric; -Coolant | 1 |
| 17***38 | Harness As-Wiring; (Relay) | 1 |
124-0121 Sensor & Mtg Gp-Expansion Tank -Coolant Level
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 1 |
| 10***40 | Sensor Group-Temperature; -Output Transfer Gear Oil | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
129-2240 Sensor & Mtg Gp-Radiator
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***52 | Harness As-Sensor; (Coolant Level) | 1 |
| 12***40 | Sensor & Mtg Group-Radiator | 1 |
105-2048 Sensor & Mtg Gp-Radiator
| 10***48 | Sensor & Mtg Group-Radiator | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 20***18 | Sensor Group-Liquid Level; (Jacket Water) | 1 |
129-2244 Sensor & Mtg Gp-Radiator
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***41 | Harness As-Sensor; (Coolant Level) | 1 |
| 12***44 | Sensor & Mtg Group-Radiator | 1 |
111-3794 Sensor Gp-Coolant Level
| 11***94 | Sensor Group-Coolant Level; -Coolant Loss-Aftercooler, Jacket Water | 2 |
| 12***45 | Harness As-Sensor; (Coolant Level) | 1 |
| 4D***94 | Clip-- Compressor Clutch Wire To Compressor Body | 1 |
165-6634 Sensor Gp-Coolant Level
| 12***45 | Harness As-Sensor; (Coolant Level) | 1 |
| 16***34 | Sensor Group-Coolant Level; (Water, Coolant)(Scac Expansion Tank) | 1 |
| 20***18 | Sensor Group-Liquid Level; (Jacket Water) | 1 |
197-9088 Sensor Gp-Engine
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 19***88 | Sensor Group-Engine | 1 |
154-6111 Sensor Gp-Engine
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***11 | Sensor Group-Engine | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
164-2441 Sensor Gp-Exhaust Temperature
| 16***41 | Sensor Group-Exhaust Temperature; -Rh, Lh | 1 |
| 26***47 | Adapter | 1 |
| 26***48 | Sensor Group-Exhaust Temperature | 1 |
3e-7826 Sensor Gp-Exhaust Temperature
| 19***50 | Sensor Group-Temperature; -Engine Oil | 1 |
| 3E***26 | Sensor Group-Exhaust Temperature | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 1 |
212-3425 Sensor Gp-Exhaust Temperature
| 21***25 | Sensor Group-Exhaust Temperature; -Turbocharger Outlet | 1 |
| 26***47 | Adapter | 1 |
| 26***48 | Sensor Group-Exhaust Temperature | 1 |
163-7882 Sensor Gp-Exhaust Temperature
| 16***82 | Sensor Group-Exhaust Temperature | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 26***47 | Adapter | 1 |
109-4367 Sensor Gp-Exhaust Temperature
| 10***67 | Sensor Group-Exhaust Temperature; -Turbocharger Inlet | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 8 |
3e-3761 Sensor Gp-Liquid Level
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 26***47 | Adapter | 1 |
| 26***49 | Sensor Group-Exhaust Temperature | 1 |
239-9957 Sensor Gp-Liquid Level
| 11***94 | Sensor Group-Coolant Level; -Coolant Loss-Aftercooler, Jacket Water | 1 |
| 23***57 | Sensor Group-Liquid Level; -Coolant Loss | 1 |
204-2518 Sensor Gp-Liquid Level
| 13***09 | Tube-Heat Shrink; (32-mm Dia)(16-cm) | 0 |
| 16***41 | Sensor Group-Exhaust Temperature; -Rh, Lh | 1 |
| 20***18 | Sensor Group-Liquid Level; (Jacket Water) | 1 |
152-8466 Sensor Gp-Particle
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***66 | Sensor Group-Particle; -Engine Oil | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
212-3421 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
| 21***21 | Sensor Group-Pressure | 1 |
128-5415 Sensor Gp-Pressure
| 12***15 | Sensor Group-Pressure | 1 |
| 15***89 | Tube; (3cm) | 0 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
143-9695 Sensor Gp-Pressure
| 14***95 | Sensor Group-Pressure; -Filtered,Unfiltered Engine Oil | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
161-9926 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***26 | Sensor Group-Pressure; -Atmospheric Air, Turbo Inlet | 1 |
| 3E***68 | Wedge-Plug Lock; (3-Pin) | 1 |
161-9929 Sensor Gp-Pressure
| 10***13 | Seal; (3 Pin Plug) | 1 |
| 15***89 | Tube; (3cm) | 0 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
194-6725 Sensor Gp-Pressure
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
| 19***25 | Sensor Group-Pressure; -Engine Oil | 1 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
161-9931 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***31 | Sensor Group-Pressure; -Atmospheric | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
212-3422 Sensor Gp-Pressure
| 13***09 | Tube-Heat Shrink; (32-mm Dia)(16-cm) | 16 |
| 16***22 | Sensor Group-Pressure; (Turbocharger Outlet) | 1 |
| 21***22 | Sensor Group-Pressure | 1 |
212-3420 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 19***26 | Harness As-Sensor; (16-18 Ga Wire)(Engine Oil Temperature) | 3 |
| 21***20 | Sensor Group-Pressure | 1 |
103-6092 Sensor Gp-Pressure
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***92 | Sensor Group-Pressure; -Filtered Oil, Unfiltered Oil | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
143-9694 Sensor Gp-Pressure
| 14***94 | Sensor Group-Pressure; -Turbocharger, Outlet | 1 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
| 8T***31 | Plug-Connector; (3-Pin) | 1 |
194-6724 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 3 |
| 19***24 | Sensor Group-Pressure; -Air Inlet Manifold | 1 |
111-8800 Sensor Gp-Pressure
| 10***08 | Kit; (Connecting Plug) (3 Pin) (Includes Plug As And Wedge) | 1 |
| 10***13 | Seal; (3 Pin Plug) | 1 |
| 11***00 | Sensor Group-Pressure; -Turbo Inlet, Atmospheric Air | 1 |
163-8492 Sensor Gp-Pressure
| 13***94 | Sleeve; (34-cm) | 0 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***92 | Sensor Group-Pressure; -Turbocharger Inlet, Rh, Lh-Atmospheric Air | 1 |
128-5416 Sensor Gp-Pressure
| 12***16 | Sensor Group-Pressure | 1 |
| 15***89 | Tube; (3cm) | 0 |
| 8T***30 | Socket-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 3 |
103-6093 Sensor Gp-Pressure
| 00***10 | Tee; (Pipe) | 1 |
| 00***28 | Nipple; (Close)(1/4-18 Npt) | 2 |
| 10***93 | Sensor Group-Pressure; -Turbocharger Inlet-Atmospheric, Crankcase | 1 |
143-9696 Sensor Gp-Pressure
| 14***96 | Sensor Group-Pressure; -Atmospheric, Crankcase | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 3E***68 | Wedge-Plug Lock; (3-Pin) | 1 |
212-0848 Sensor Gp-Speed
| 10***13 | Seal; (3 Pin Plug) | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 3 |
212-3426 Sensor Gp-Speed
| 10***29 | Sensor Group-Speed; -Timing-Engine Speed | 1 |
| 13***09 | Tube-Heat Shrink; (32-mm Dia)(16-cm) | 0 |
| 21***26 | Sensor Group-Speed; -Magnetic | 1 |
102-9029 Sensor Gp-Speed
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***29 | Sensor Group-Speed; -Timing-Engine Speed | 1 |
| 17***49 | Strap; (Marker) | 1 |
127-1008 Sensor Gp-Speed
| 12***08 | Sensor Group-Speed; -Engine Speed/Timing | 1 |
| 17***49 | Strap; (Marker) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
9x-5392 Sensor Gp-Speed
| 13***09 | Tube-Heat Shrink; (32-mm Dia)(16-cm) | 0 |
| 16***92 | Sensor Group-Pressure; -Turbocharger Inlet, Rh, Lh-Atmospheric Air | 1 |
| 9X***92 | Sensor Group-Speed; -Timing | 1 |
265-9034 Sensor Gp-Speed
| 21***58 | Tube-Heat Shrink; (24-mm Dia)(200-cm) | 0 |
| 26***34 | Sensor Group-Speed; -Primary | 1 |
| 9X***92 | Sensor Group-Speed; -Timing | 1 |
189-5746 Sensor Gp-Speed
| 10***08 | Kit; (Connecting Plug) (3 Pin) (Includes Plug As And Wedge) | 1 |
| 10***13 | Seal; (3 Pin Plug) | 1 |
| 18***46 | Sensor Group-Speed; -Low Output-Engine Timing-Transmission | 1 |
265-9033 Sensor Gp-Speed
| 26***33 | Sensor Group-Speed; -Engine | 1 |
| 29***36 | Sensor Group-Speed; -Primary | 1 |
4p-7610 Sensor Gp-Speed
| 13***09 | Tube-Heat Shrink; (32-mm Dia)(16-cm) | 0 |
| 16***23 | Sensor Group-Pressure; (Unfiltered Fuel Pressure) | 1 |
| 4P***10 | Sensor Group-Speed; -Engine Speed | 1 |
129-6628 Sensor Gp-Speed
| 12***28 | Sensor Group-Speed; -Engine Speed/Timing | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 3 |
| 8L***86 | Seal-O-Ring (Id=16.36mm); (16.36-mm Id) | 1 |
273-5041 Sensor Gp-Speed
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 2 |
| 19***26 | Harness As-Sensor; (16-18 Ga Wire)(Engine Oil Temperature) | 3 |
| 19***27 | Harness As-Sensor; (14-Ga Wire)(Engine Oil Temperature) | 3 |
295-4636 Sensor Gp-Speed
| 11***66 | Seal-O-Ring | 1 |
| 13***07 | Washer; (21.1x28.1x0.9-mm Thk) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
212-3424 Sensor Gp-Temperature
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***43 | Sleeve; (2.8-Dm) | 0 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
212-3423 Sensor Gp-Temperature -Coolant
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 21***23 | Sensor Group-Temperature; -Coolant | 1 |
| 8T***32 | Receptacle-Connector; (3-Pin)(Throttle Position Sensor) | 1 |
102-2240 Sensor Gp-Temperature
| 10***40 | Sensor Group-Temperature; -Output Transfer Gear Oil | 1 |
| 11***66 | Seal-O-Ring | 1 |
| 13***07 | Washer; (21.1x28.1x0.9-mm Thk) | 1 |
195-2150 Sensor Gp-Temperature
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 19***50 | Sensor Group-Temperature; -Engine Oil | 1 |
| 3E***71 | Wedge; (Receptacle Lock) (3 Pin) | 1 |
118-7562 Sensor Gp-Temperature
| 11***62 | Sensor Group-Temperature | 1 |
| 13***09 | Tube-Heat Shrink; (32-mm Dia)(16-cm) | 0 |
| 26***34 | Sensor Group-Speed; -Primary | 1 |
128-4347 Sensor Gp-Temperature
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***47 | Sensor Group-Temperature | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
8n-8486 Silencer Gp-Air Starting
| 10***32 | Control Group-Electronic; (Coolant Temp Sensor) | 1 |
| 13***09 | Tube-Heat Shrink; (32-mm Dia)(16-cm) | 0 |
| 8N***86 | Silencer Group-Air Starting | 1 |
8l-5937 Starting Motor As-Electric
| 12***47 | Sensor Group-Temperature | 1 |
| 13***09 | Tube-Heat Shrink; (32-mm Dia)(16-cm) | 0 |
| 8L***37 | Starting Motor As-Electric | 1 |
143-5174 Starting Motor Gp-Air -Mounted, Lh
| 03***61 | Elbow; (45 Degree) | 1 |
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 3 |
| 10***69 | Silencer-Air Starting | 1 |
143-5168 Starting Motor Gp-Air
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 3 |
| 14***68 | Starting Motor Group-Air | 1 |
| 1D***66 | Bolt Bracket Assembly To Yoke | 4 |
143-5173 Starting Motor Gp-Air -Reverse Rotation, Lh
| 03***17 | Washer-Spring | 2 |
| 09***33 | Bolt-Socket Head; (M5x0.8x20-mm) | 1 |
| 11***99 | Housing-Motor | 1 |
278-6221 Starting Motor Gp-Air -Lh
| 03***61 | Elbow; (45 Degree) | 2 |
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 3 |
| 10***69 | Silencer-Air Starting | 1 |
7c-3372 Starting Motor Gp-Air
| 1D***19 | Nut-Retainer To Fan Bracket Assembly | 1 |
| 1H***23 | Packing,Preformed Part Of Kit P/N 5r***25 | 1 |
| 1H***29 | Plate,Insulation Starter Motor Assembly | 3 |
284-1449 Starting Motor Gp-Air -Reverse Rotation, Lh
| 03***61 | Elbow; (45 Degree) | 1 |
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 3 |
7c-3371 Starting Motor Gp-Air -Single
| 1D***66 | Bolt Bracket Assembly To Yoke | 2 |
| 1D***69 | Bolt 107.95 mm(4.25 In.) Long; Bolt (Plate To Front Housing) | 2 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 4 |
263-7751 Starting Motor Gp-Air
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 3 |
| 10***69 | Silencer-Air Starting | 1 |
| 10***05 | Adapter-Pipe | 1 |
143-5169 Starting Motor Gp-Air -Reverse Rotation, Lh
| 03***17 | Washer-Spring | 2 |
| 09***33 | Bolt-Socket Head; (M5x0.8x20-mm) | 1 |
| 11***99 | Housing-Motor | 1 |
284-1448 Starting Motor Gp-Air -Reverse Rotation, Lh
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 3 |
| 16***86 | Elbow | 1 |
| 17***45 | Valve-Relay; (Air Start)(Air Start) | 2 |
6v-0927 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 13 |
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
6v-5540 Starting Motor Gp-Electric
| 5C***74 | Nut (M5x.8 Thd); (M5x0.8-Thd) | 2 |
| 6V***40 | Starting Motor Group-Electric; (Robert Bosch) | 1 |
| 7X***62 | Washer-Hard; (13.5x19x0.8-mm Thk) | 5 |
6v-0501 Starting Motor Gp-Electric
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 3 |
| 16***86 | Elbow | 1 |
| 17***45 | Valve-Relay; (Air Start)(Air Start) | 1 |
6v-4246 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 13 |
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
7c-0526 Starting Motor Gp-Electric -Single
| 3E***25 | Cover As; (Starting Motor) | 1 |
| 3E***27 | Kit-Bearing; (Starting Motor)(Incl Bearing Seals & Spacers) | 1 |
| 3E***28 | Kit; (Brush) (Includes O-Rings, Screw, Spring, & Brush) | 1 |
8n-3897 Starting Motor Gp-Electric -Dual
| 6V***08 | Starting Motor Group-Electric | 1 |
| 7J***02 | Bolt-12 Point Head; (5/8-11x1.5-In) | 3 |
| 8N***97 | Starting Motor Group-Electric; -Dual | 1 |
7c-0527 Starting Motor Gp-Electric -Dual
| 20***62 | Starting Motor Group-Electric | 1 |
| 7C***27 | Starting Motor Group-Electric; -Dual | 1 |
| 7J***02 | Bolt-12 Point Head; (5/8-11x1.5-In) | 3 |
8n-2945 Starting Motor Gp-Electric
| 3L***04 | Shield-Terminal | 4 |
| 3L***34 | Terminal-Ring; (0000-Ga, 1/2-In Screw) | 2 |
| 4H***69 | Gasket Starter Mtg Part Of Kit P/N 5r***25 | 2 |
6v-0508 Starting Motor Gp-Electric
| 03***61 | Elbow; (45 Degree) | 1 |
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 3 |
207-1562 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 0S***97 | Capscrew (1/4 - 28 Nf X 1 Gd8, Hex) | 5 |
| 20***62 | Starting Motor Group-Electric | 1 |
207-1556 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 20***56 | Starting Motor Group-Electric; (24-Volt) | 1 |
237-1962 Starting Motor Gp-Electric
| 0S***97 | Capscrew (1/4 - 28 Nf X 1 Gd8, Hex) | 5 |
| 23***62 | Starting Motor Group-Electric | 1 |
| 25***79 | Kit-Solenoid; (24-Volt)(Starting Motor) | 1 |
6v-5582 Starting Motor Gp-Electric
| 10***54 | Starting Motor Group-Electric; (Delco Remy) | 1 |
| 6V***40 | Starting Motor Group-Electric; (Robert Bosch) | 1 |
| 6V***82 | Starting Motor Group-Electric; (Nippondenso) | 2 |
106-8551 Starting Motor Gp-Electric
| 10***51 | Starting Motor Group-Electric; Motor Gp-Electric Hydraulic Pump | 1 |
| 3L***36 | Spacer-Bracket To Diesel Water Passage Cover | 1 |
| 3L***04 | Shield-Terminal | 4 |
8n-7253 Starting Motor Gp-Electric
| 3L***36 | Spacer-Bracket To Diesel Water Passage Cover | 1 |
| 3L***04 | Shield-Terminal | 4 |
| 3L***34 | Terminal-Ring; (0000-Ga, 1/2-In Screw) | 2 |
106-8554 Starting Motor Gp-Electric
| 10***54 | Starting Motor Group-Electric; (Delco Remy) | 1 |
| 4H***69 | Gasket Starter Mtg Part Of Kit P/N 5r***25 | 1 |
| 6V***11 | Starting Motor Group-Electric; -24-Volt | 1 |
6v-4320 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 13 |
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
6v-5539 Starting Motor Gp-Electric
| 10***51 | Starting Motor Group-Electric; Motor Gp-Electric Hydraulic Pump | 1 |
| 6V***20 | Starting Motor Group-Electric | 1 |
| 6V***39 | Starting Motor Group-Electric; (24-Volt) | 1 |
8n-3896 Starting Motor Gp-Electric -Dual
| 20***62 | Starting Motor Group-Electric | 2 |
| 3L***04 | Shield-Terminal | 4 |
| 3L***34 | Terminal-Ring; (0000-Ga, 1/2-In Screw) | 2 |
6v-0511 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 13 |
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
170-5396 Strip Gp-Terminal -Rtd
| 03***21 | Shim Lever Housing | 1 |
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
| 0S***97 | Capscrew (1/4 - 28 Nf X 1 Gd8, Hex) | 13 |
170-5395 Strip Gp-Terminal -Thermocouple
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 17***95 | Strip Group-Terminal; -Thermocouple | 1 |
| 25***79 | Kit-Solenoid; (24-Volt)(Starting Motor) | 1 |
170-5400 Strip Gp-Terminal -Main
| 09***21 | Rail-Mounting; (60-cm) | 1 |
| 17***00 | Strip Group-Terminal; -Main | 1 |
| 31***98 | Block-Terminal; (600-Volt, 25-Ampere) | 30 |
3n-7056 Support Gp-Battery
| 09***21 | Rail-Mounting; (60-cm) | 1 |
| 31***98 | Block-Terminal; (600-Volt, 25-Ampere) | 34 |
| 31***99 | Cover-Terminal | 6 |
7n-8001 Switch Gp-Toggle
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 7N***01 | Switch As-Toggle; -Prelubrication Override-Crank Override | 1 |
| 9X***01 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 2 |
8n-0694 Switch As-Toggle
| 09***21 | Rail-Mounting; (60-cm) | 1 |
| 15***55 | Fuse; (10-Ampere) | 2 |
| 31***83 | Block-Terminal; (600-Volt, 25-Ampere) | 10 |
123-2993 Switch Gp-Liquid Level
| 12***93 | Switch Group-Liquid Level; -Engine Oil-Ster, Fan Dr Oil (Engine On)-Torque Converter Oil-Torque Conv Oil (Low, Cold)-Front, Rear Engine Oil-Steering Oil, Engine Off-Torque Conv Oil (Low, Hot)-Auxiliary Coolant-Brake Oil, Hoist-Engine Coolant | 1 |
| 3N***54 | Support As-Battery | 1 |
| 3N***55 | Board | 1 |
172-8660 Switch Gp-Liquid Level -Fuel
| 17***60 | Switch Group-Liquid Level; -Rear Engine Oil-Ster, Hydraulic Fan Oil-Engine On-Steering Oil, Engine Off-Auxiliary Coolant-Front Engine Oil-Brake Oil, Hoist-Engine Coolant-Tc Oil-Low, Cold | 1 |
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 3 |
| 6T***31 | Nut-Hexagon-(15/32-32 Thd) | 2 |
3e-0264 Switch Gp-Temperature
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 3E***64 | Switch Group-Temperature; -Coolant | 1 |
120-4498 Thermocouple Gp
| 12***98 | Thermocouple Group; -Exhaust | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
144-9059 Transformer Gp-Current
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 14***59 | Transformer Group-Current | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
144-9058 Transformer Gp-Current
| 14***58 | Transformer Group-Current | 1 |
| 3L***87 | Lockwasher 7.24mm(.285in.)O.D.; (3.7x7.24x.48mm Thk) | 2 |
| 6T***31 | Nut-Hexagon-(15/32-32 Thd) | 2 |
154-3454 Transformer Gp-Potential
| 12***88 | Transformer As-Current | 1 |
| 14***10 | Mounting Group-Transformer | 1 |
| 15***54 | Transformer Group-Potential | 1 |
131-9097 Tray Gp-Cable
| 12***89 | Transformer As-Current | 1 |
| 13***97 | Tray Group-Cable | 1 |
| 14***10 | Mounting Group-Transformer | 1 |
143-1897 Tray Gp-Cable
| 14***97 | Tray Group-Cable | 1 |
| 15***70 | Shelf; (Transformer) | 1 |
| 15***88 | Transformer As; (Low Voltage) | 2 |
5n-8980 Valve As-Solenoid -Air Start
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 3 |
| 12***22 | Screw-Button Head; (3/8-16x2.25-In)(3/8-16x2.25in) | 1 |
| 13***95 | Tray | 1 |
143-5172 Valve As-Solenoid -Air Start
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 1 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 7 |
1l-2073 Valve Gp-Pressure Reducing -Rh
| 1L***73 | Valve Group-Pressure Reducing; -Rh | 1 |
| 3F***65 | Locknut; (1/2-14-Nptf-Thd) | 1 |
| 5N***43 | Adapter (Small); (.50-14 Thd) | 1 |
228-7319 Wire As
| 0T***20 | Bolt (1.25 In. Long X .438 In. Dia.) | 1 |
| 1H***69 | Button-Spring | 1 |
| 1H***70 | Chamber | 1 |
207-3814 Wire As -Product Link, Splice
| 20***14 | Wire As; -Product Link, Splice | 1 |
| 7G***17 | Plug-Seal | 1 |
| 7G***18 | Plug-Seal | 1 |
228-7320 Wire As
| 22***20 | Wire As | 1 |
228-7323 Wire As
| 22***23 | Wire As | 1 |
150-4200 Wiring Gp-Air Shutoff
| 15***00 | Wiring Group-Air Shutoff | 1 |
143-1918 Wiring Gp-Air Shutoff
| 14***18 | Wiring Group-Air Shutoff | 1 |
150-4199 Wiring Gp-Air Starting
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 10***56 | Strap-Cable | 4 |
| 13***14 | Harness As; (Air Shutoff) | 1 |
143-1921 Wiring Gp-Alternator
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 10***56 | Strap-Cable | 4 |
| 14***21 | Wiring Group-Alternator | 1 |
143-1924 Wiring Gp-Electric Starting -Single Electric Start
| 10***56 | Strap-Cable | 2 |
| 14***24 | Wiring Group-Electric Starting; -Single Electric Start | 1 |
| 15***02 | Harness As-Solenoid; (Air Starting) | 1 |
150-4197 Wiring Gp-Electric Starting -Dual Electric
| 10***56 | Strap-Cable | 2 |
| 13***25 | Harness As-Motor; (Starting) | 1 |
| 13***26 | Harness As-Motor; (Starting) | 1 |
150-4198 Wiring Gp-Electric Starting -Single Electric Start
| 10***56 | Strap-Cable | 2 |
| 13***25 | Harness As-Motor; (Starting) | 1 |
| 15***98 | Wiring Group-Electric Starting; -Single Electric Start | 1 |
143-1925 Wiring Gp-Electric Starting -Dual Electric
| 10***56 | Strap-Cable | 2 |
| 14***23 | Harness As | 1 |
| 14***25 | Wiring Group-Electric Starting; -Dual Electric | 1 |
161-0820 Wiring Gp-Engine -Sensor
| 00***40 | Connector; (Flared) | 1 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 4 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 2 |
134-0086 Wiring Gp-Engine -Lh
| 00***40 | Connector; (Flared) | 1 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 11 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 1 |
128-2858 Wiring Gp-Engine -Lh
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 12***58 | Wiring Group-Engine; -Lh | 1 |
| 13***34 | Harness As-Sensor; (Air/Oil Temperature Sensor) | 1 |
143-5155 Wiring Gp-Engine -Rh
| 00***40 | Connector; (Flared) | 1 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 4 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 2 |
126-9186 Wiring Gp-Engine
| 10***56 | Strap-Cable | 2 |
| 12***86 | Wiring Group-Engine | 1 |
| 15***03 | Harness As-Motor; (Starting) | 1 |
143-1865 Wiring Gp-Engine
| 00***40 | Connector; (Flared) | 1 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 4 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 1 |
134-0085 Wiring Gp-Engine -Rh
| 00***40 | Connector; (Flared) | 1 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 12 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 1 |
128-2857 Wiring Gp-Engine -Rh
| 00***40 | Connector; (Flared) | 1 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 3 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 1 |
143-1864 Wiring Gp-Engine
| 00***40 | Connector; (Flared) | 1 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 9 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 3 |
126-9185 Wiring Gp-Engine
| 10***56 | Strap-Cable | 2 |
| 12***85 | Wiring Group-Engine | 1 |
| 15***03 | Harness As-Motor; (Starting) | 1 |
143-5160 Wiring Gp-Engine -Lh
| 00***40 | Connector; (Flared) | 1 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 4 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 1 |
143-5157 Wiring Gp-Engine -Lh
| 10***56 | Strap-Cable | 2 |
| 13***24 | Harness As-Motor; (Starting) | 1 |
| 14***57 | Wiring Group-Engine; -Lh | 1 |
143-1926 Wiring Gp-Engine -Air Start
| 00***40 | Connector; (Flared) | 1 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 4 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 2 |
242-7961 Wiring Gp-Generator
| 00***40 | Connector; (Flared) | 1 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 4 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 2 |
134-6323 Wiring Gp-Panel -Speed Control
| 12***96 | Circuit Breaker As | 1 |
| 13***18 | Harness As-Wiring; (Alternator) | 1 |
| 13***23 | Wiring Group-Panel; -Speed Control | 1 |
134-6319 Wiring Gp-Panel -Ether
| 11***23 | Block-Contact; (1-Pole)(Normally Open) | 1 |
| 13***16 | Harness As-Wiring; (Air Shutoff) | 1 |
| 13***19 | Wiring Group-Panel; -Ether | 1 |
134-6313 Wiring Gp-Panel -Prelubrication
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 13***13 | Wiring Group-Panel; -Prelubrication | 1 |
| 16***52 | Harness As-Sensor; (Temperature) | 1 |
134-6315 Wiring Gp-Panel -Air Shutoff
| 13***15 | Wiring Group-Panel; -Air Shutoff | 1 |
| 24***04 | Harness As-Wiring; -Generator Terminal Strip | 1 |
| 24***52 | Harness As-Power; -Digital Voltage Regulator | 1 |
134-6317 Wiring Gp-Panel -Alternator
| 13***14 | Harness As-Wiring; (Prelubrication) | 1 |
| 13***17 | Wiring Group-Panel; -Alternator | 1 |
| 4B***63 | Washer; (4.7x11x1.2-mm Thk) | 1 |
120-4494 Wiring Gp-Pyrometer
| 11***22 | Terminal; (Double) | 2 |
| 12***94 | Wiring Group-Pyrometer | 1 |
| 13***20 | Harness As-Wiring | 1 |
158-6223 Wiring Gp-Pyrometer
| 13***24 | Harness As-Wiring; (Speed Control) | 1 |
| 15***23 | Wiring Group-Pyrometer | 1 |
| 4D***36 | Switch As-Toggle; (Engine Protection Override) | 1 |
162-7653 Wiring Gp-Sensor -Lh
| 09***04 | Tube-Heat Shrink; (19.1-mm Dia)(6-cm) | 0 |
| 12***69 | Harness As-Monitor; (\Pyrometer) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 8 |
Enclosures, Guards And Bases
2w-8160 Base As
| 19***01 | Harness As-Monitor; (Pyrometer) | 1 |
| 2W***60 | Base As | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 29 |
7w-7911 Base As
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***91 | Sensor Group-Temperature; -Air Inlet | 1 |
| 16***54 | Harness As-Sensor | 1 |
324-4579 Bracket Gp-Support
| 32***79 | Bracket Group-Support | 1 |
128-6149 Cover Gp-Generator -Front
| 12***49 | Cover Group-Generator; -Front | 1 |
| 18***14 | Bracket-Support | 2 |
| 18***15 | Plate | 1 |
141-4987 Cover Gp-Generator -Coupling
| 03***84 | Plug 12.7 mm(.50 In.) Dia. | 4 |
| 14***87 | Cover Group-Generator; -Coupling | 1 |
| 5N***67 | Seal; 1.52mm(.059in)Thk | 3 |
115-2508 Cover Gp-Generator -Top
| 11***08 | Cover Group-Generator; -Top | 1 |
3n-5764 Guard Gp-Extension
| 3N***64 | Guard Group-Extension | 1 |
| 4F***11 | Plug 3.5 cm(1.37 In.) Hole; Plug-- To Support Assembly | 2 |
| 5P***37 | Washer 5t***54 Plate To 7t***28 Cable As | 8 |
4p-9064 Guard Gp-Extension
| 12***94 | Cover-Drip | 1 |
| 1D***40 | Bolt,Machine Fuel Filter Mounting | 6 |
| 4P***64 | Guard Group-Extension | 1 |
3n-8572 Mounting Gp-Vibration Isolator
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 16 |
| 1V***23 | Plate | 8 |
| 2N***85 | Nut-Clip-Damper Guard To Coupling Guard | 16 |
3n-8573 Mounting Gp-Vibration Isolator
| 1V***23 | Plate | 4 |
| 2N***85 | Nut-Clip-Damper Guard To Coupling Guard | 8 |
| 3N***73 | Mounting Group-Vibration Isolator | 1 |
7n-8642 Rail Gp-Engine Support
| 7N***42 | Rail Group-Engine Support | 1 |
195-8037 Rail Gp-Engine Support
| 11***34 | Support-Lh | 1 |
| 11***35 | Support-Rh | 1 |
| 11***36 | Brace-Engine Support | 2 |
121-9294 Rail Gp-Engine Support
| 12***94 | Rail Group-Engine Support | 1 |
| 8T***94 | Washer; (3/4 Hardened) (Current Adapters) | 28 |
| 8T***98 | Capscrew; (Hex Hd) (3/4-10x1 3/4 Gd 8 Z) (Early Adapters) | 28 |
197-5508 Rail Gp-Engine Support
| 11***36 | Brace-Engine Support | 2 |
| 11***37 | Plate-Support | 1 |
| 12***77 | Support-Rh | 1 |
115-7030 Rail Gp-Engine Support
| 11***30 | Rail Group-Engine Support | 1 |
| 1A***58 | Bolt 1.75 In. (44.45 mm) Long | 36 |
| 5P***48 | Washer--Bracket To L.H. Support Rail | 36 |
9y-0845 Rail Gp-Engine Support
| 7W***27 | Support-Engine & Radiator; (Rh) | 1 |
| 7W***29 | Support-Engine & Radiator; (Lh) | 1 |
| 8T***94 | Washer; (3/4 Hardened) (Current Adapters) | 28 |
197-5512 Rail Gp-Engine Support
| 18***11 | Brace-Engine Support | 1 |
| 18***14 | Bracket-Support | 3 |
| 18***15 | Plate | 1 |
7w-3725 Rail Gp-Engine Support
| 7W***25 | Rail Group-Engine Support | 1 |
7w-3749 Rail Gp-Engine Support
| 0S***97 | Bolt (3/4-16x2.25in); (3/4-16x2.25-In) | 32 |
| 1B***09 | Nut,Plain,Hexagon Radiator Guard | 4 |
| 4L***65 | Setscrew; (1-14x3.88-In) | 4 |
Engine Arrangement
173-6953 Engine Ar
| 10***05 | Valve Mechanism Group | 8 |
| 10***74 | Pump Group-Fuel Injection | 8 |
| 10***36 | Crankshaft Group | 1 |
100-8325 Engine Ar
| 10***05 | Valve Mechanism Group | 8 |
| 10***25 | Engine Ar | 1 |
| 10***74 | Pump Group-Fuel Injection | 8 |
173-6952 Engine Ar
| 10***05 | Valve Mechanism Group | 8 |
| 10***36 | Crankshaft Group | 1 |
| 10***27 | Cylinder Block Group | 1 |
Fuel System
161-0797 Control As-Governor -Load Share
| 16***97 | Control As-Governor; -Load Share | 1 |
309-1583 Control As-Governor -Load Share
| 30***83 | Control As-Governor; -Load Share | 1 |
4p-0319 Control As-Governor -Load Share
| 1L***73 | Valve Group-Pressure Reducing; -Rh | 1 |
| 3L***93 | Nipple-Close; (1 1/2-11 1/2 Npt Thd) | 1 |
| 4P***19 | Control As-Governor; -Load Share | 1 |
131-5459 Control As-Governor -Load Share
| 13***59 | Control As-Governor; -Load Share | 1 |
7e-6634 Cooler Gp-Fuel
| 7E***34 | Cooler Group-Fuel | 1 |
7e-6682 Cooler Gp-Fuel
| 03***32 | Strap--Harness Assembly To Compressor | 3 |
| 2H***39 | Union 90 Degrees; -- Adapter To Junction Block | 1 |
| 2L***28 | Union | 1 |
139-5657 Cooler Gp-Fuel
| 03***32 | Strap--Harness Assembly To Compressor | 3 |
| 13***57 | Cooler Group-Fuel | 1 |
| 2H***39 | Union 90 Degrees; -- Adapter To Junction Block | 1 |
7e-8090 Cooler Gp-Fuel
| 03***32 | Strap--Harness Assembly To Compressor | 3 |
| 1S***14 | Grommet (1.75 In. I.D.)- To Platform | 2 |
| 2H***39 | Union 90 Degrees; -- Adapter To Junction Block | 1 |
7e-6681 Cooler Gp-Fuel
| 7E***81 | Cooler Group-Fuel | 1 |
115-7842 Filter Gp-Fuel -Lh
| 03***49 | Elbow; (90 Degree, 37 Degree Flared) | 1 |
| 03***36 | Tee-Flared | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
263-6853 Filter Gp-Fuel -Lh
| 00***81 | Tee-Union; (Flared 37-Deg) | 1 |
| 00***73 | Elbow, Each Including: | 1 |
| 03***46 | Elbow, 90 Deg Adj., 1/4in. J.I.C. X 7/16in.-14 Str. Thd. | 1 |
175-5207 Filter Gp-Fuel
| 00***81 | Tee-Union; (Flared 37-Deg) | 1 |
| 00***73 | Elbow, Each Including: | 1 |
| 03***46 | Elbow, 90 Deg Adj., 1/4in. J.I.C. X 7/16in.-14 Str. Thd. | 1 |
121-0470 Filter Gp-Fuel -Duplex
| 00***81 | Tee-Union; (Flared 37-Deg) | 1 |
| 00***73 | Elbow, Each Including: | 1 |
| 03***46 | Elbow, 90 Deg Adj., 1/4in. J.I.C. X 7/16in.-14 Str. Thd. | 1 |
7w-9742 Filter Gp-Fuel -Lh
| 00***07 | Elbow; (90 Degree) | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 8 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 1 |
112-4922 Filter Gp-Fuel -Rh
| 11***22 | Filter Group-Fuel; -Rh | 1 |
| 28***89 | Plate Group-Heat Exchanger | 10 |
| 28***90 | Seal Group | 11 |
8n-6435 Filter Gp-Primary Fuel
| 00***81 | Tee-Union; (Flared 37-Deg) | 1 |
| 00***73 | Elbow, Each Including: | 1 |
| 03***46 | Elbow, 90 Deg Adj., 1/4in. J.I.C. X 7/16in.-14 Str. Thd. | 1 |
149-6326 Governor Gp-Electronic
| 00***81 | Tee-Union; (Flared 37-Deg) | 1 |
| 00***73 | Elbow, Each Including: | 1 |
| 03***46 | Elbow, 90 Deg Adj., 1/4in. J.I.C. X 7/16in.-14 Str. Thd. | 1 |
132-0202 Injector Gp-Fuel
| 13***02 | Injector Group-Fuel | 1 |
| 8J***25 | Seal-O-Ring | 1 |
| 9X***35 | Seal-O-Ring | 1 |
116-7534 Injector Gp-Fuel
| 11***34 | Injector Group-Fuel | 1 |
| 1L***69 | Ring-Retaining | 1 |
| 1W***31 | Base-Primary Fuel Filter | 1 |
114-6469 Injector Gp-Fuel
| 03***49 | Elbow; (90 Degree, 37 Degree Flared) | 3 |
| 03***36 | Tee-Flared | 1 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 3 |
126-7992 Injector Gp-Fuel
| 10***38 | End-Wire; (16-Ga) | 3 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***85 | Harness As-Engine; -Governor | 1 |
7w-3935 Lines Gp-Fuel Ratio Control
| 03***72 | Elbow; (Flared 90 Degree) | 1 |
| 03***77 | Adapter | 1 |
| 03***82 | Union-Flared | 1 |
5n-2438 Lines Gp-Flexible Fuel
| 5N***38 | Lines Group-Flexible Fuel | 1 |
| 8J***25 | Seal-O-Ring | 1 |
| 9X***35 | Seal-O-Ring | 1 |
136-1695 Lines Gp-Fuel -Lh
| 13***95 | Lines Group-Fuel; -Lh | 1 |
| 8J***25 | Seal-O-Ring | 1 |
| 9X***35 | Seal-O-Ring | 1 |
136-1694 Lines Gp-Fuel -Rh
| 13***94 | Lines Group-Fuel; -Rh | 1 |
| 8J***25 | Seal-O-Ring | 1 |
| 9X***35 | Seal-O-Ring | 1 |
147-3383 Lines Gp-Fuel Injection
| 03***64 | Elbow (90 Degrees) | 1 |
| 03***72 | Elbow; (Flared 90 Degree) | 1 |
| 06***48 | Union-Flared | 1 |
101-1248 Lines Gp-Fuel Injection
| 10***48 | Lines Group-Fuel Injection | 1 |
| 3N***04 | Hose As | 1 |
| 5F***90 | Clip | 2 |
119-5656 Lines Gp-Fuel Injection
| 03***64 | Elbow (90 Degrees) | 1 |
| 03***72 | Elbow; (Flared 90 Degree) | 1 |
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 5 |
156-9752 Manifold Gp-Fuel -Rh
| 03***64 | Elbow (90 Degrees) | 1 |
| 03***72 | Elbow; (Flared 90 Degree) | 2 |
| 06***48 | Union-Flared | 1 |
156-9751 Manifold Gp-Fuel -Lh
| 00***81 | Tee-Union; (Flared 37-Deg) | 2 |
| 11***49 | Tube As | 1 |
| 12***16 | Tube As | 1 |
116-7010 Pump Gp-Fuel Injection
| 11***10 | Pump Group-Fuel Injection | 1 |
| 23***82 | Plug | 1 |
| 24***07 | Seal-O-Ring | 1 |
100-8774 Pump Gp-Fuel Injection
| 10***74 | Pump Group-Fuel Injection | 1 |
| 12***95 | Injector Group-Fuel | 1 |
| 7C***15 | Plug | 1 |
256-3663 Pump Gp-Fuel Injection
| 13***02 | Injector Group-Fuel | 1 |
| 25***63 | Pump Group-Fuel Injection | 1 |
| 7C***15 | Plug | 1 |
7n-8599 Pump Gp-Fuel Priming
| 23***82 | Plug | 1 |
| 24***07 | Seal-O-Ring | 1 |
| 24***08 | Seal-O-Ring | 1 |
115-1064 Pump Gp-Fuel Priming -Lh
| 11***64 | Pump Group-Fuel Priming; -Lh | 1 |
| 23***57 | Injector Group-Fuel | 1 |
| 23***82 | Plug | 1 |
8n-6151 Pump Gp-Fuel Transfer
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 0T***65 | Bolt--3/8" X 3 1/2"--Use As Required; Bolt 5t***56 Plate To Cover Gp 4n***72 | 2 |
313-7770 Pump Gp-Fuel Transfer
| 1H***96 | Packing,Preformed Cartridge Part Of Kit P/N 4j***80 | 1 |
| 1N***36 | Coupling-Drive | 1 |
| 31***70 | Pump Group-Fuel Transfer; -1-Section Gear | 2 |
225-4260 Pump Gp-Fuel Transfer
| 1H***96 | Packing,Preformed Cartridge Part Of Kit P/N 4j***80 | 1 |
| 1N***36 | Coupling-Drive | 1 |
| 22***60 | Pump Group-Fuel Transfer | 2 |
169-8615 Pump Gp-Fuel Transfer
| 16***15 | Pump Group-Fuel Transfer | 2 |
| 1H***96 | Packing,Preformed Cartridge Part Of Kit P/N 4j***80 | 1 |
| 1N***36 | Coupling-Drive | 1 |
1n-4478 Pump Gp-Fuel Transfer
| 1B***82 | Bolt (1.25 In. Long X .313 In. Dia.) | 1 |
| 1N***78 | Pump Group-Fuel Transfer; (1-Section Gear) | 1 |
| 2W***06 | Pump As-Fuel Priming | 1 |
246-0452 Shield Gp-Fuel Lines
| 23***60 | Tape; -Anti-Splash | 1 |
| 24***52 | Shield Group-Fuel Lines | 1 |
| 25***55 | Shield-Fuel Line Fitting; (18.05-mm Id) | 4 |
244-6568 Shield Gp-Fuel Lines
| 24***44 | Shield-Fuel Line Fitting; (9.8-mm Id) | 32 |
| 24***68 | Shield Group-Fuel Lines | 1 |
244-6567 Shield Gp-Fuel Lines
| 24***67 | Shield Group-Fuel Lines; -Duplex Fuel Filter | 1 |
| 25***91 | Kit-Seal | 1 |
| 25***92 | Kit-Repair; (Gear, Shaft) | 1 |
254-7277 Shield Gp-Fuel Lines -Fuel Manifold
| 23***60 | Tape; -Anti-Splash | 0 |
| 25***55 | Shield-Fuel Line Fitting; (18.05-mm Id) | 4 |
| 25***77 | Shield Group-Fuel Lines; -Fuel Manifold | 1 |
244-2478 Shield Gp-Fuel Lines -Fuel Priming Pump
| 11***97 | Seal-Lip; (Inner) | 1 |
| 16***17 | Seal-Lip Type; (Outer) | 1 |
| 1W***03 | Gear As-Idler | 1 |
241-6246 Shield Gp-Fuel Lines
| 11***97 | Seal-Lip; (Inner) | 1 |
| 12***37 | Shaft As-Drive | 1 |
| 16***17 | Seal-Lip Type; (Outer) | 1 |
Generators
142-4455 Adapter Gp-Generator Coupling
| 14***55 | Adapter Group-Generator Coupling | 1 |
| 18***11 | Brace-Engine Support | 1 |
| 18***14 | Bracket-Support | 2 |
216-9721 Bracket Gp-Mounting
| 18***11 | Brace-Engine Support | 1 |
| 19***13 | Support As; (Lh) | 1 |
| 19***14 | Support As; (Rh) | 1 |
154-1901 Connection Gp-Terminal Strip
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
| 11***77 | Sleeve-Wear | 1 |
| 12***11 | Adapter As | 1 |
142-4450 Exciter Gp -Permanent Magnet
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
| 11***77 | Sleeve-Wear | 1 |
| 11***68 | Retainer-Bearing | 2 |
215-2402 Exciter Gp -Power
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 6 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 36 |
144-1756 Generator Ar
| 10***49 | Rotor As-Magnetic | 1 |
| 12***25 | Stator As-Magnet | 1 |
| 14***56 | Generator Ar | 1 |
144-1848 Generator Ar
| 11***08 | Film-Instruction; (Generator Notice) | 1 |
| 14***55 | Generator Group | 1 |
| 14***48 | Generator Ar | 1 |
144-1760 Generator Ar
| 14***60 | Generator Ar | 1 |
| 20***24 | Rotor-Exciter | 1 |
| 21***04 | Stator-Exciter | 1 |
144-1755 Generator Gp
| 11***08 | Film-Instruction; (Generator Notice) | 1 |
| 14***55 | Generator Group | 1 |
| 14***47 | Generator Group | 1 |
270-2276 Generator Gp
| 14***87 | Cover Group-Generator; -Coupling | 1 |
| 14***50 | Exciter Group; -Permanent Magnet | 1 |
| 14***55 | Adapter Group-Generator Coupling | 1 |
144-1847 Generator Gp
| 14***87 | Cover Group-Generator; -Coupling | 1 |
| 14***50 | Exciter Group; -Permanent Magnet | 1 |
| 14***55 | Adapter Group-Generator Coupling | 1 |
144-1759 Generator Gp
| 14***87 | Cover Group-Generator; -Coupling | 1 |
| 14***50 | Exciter Group; -Permanent Magnet | 1 |
| 14***52 | Rectifier Group-Revolving | 1 |
257-3290 Generator Gp
| 14***87 | Cover Group-Generator; -Coupling | 1 |
| 14***50 | Exciter Group; -Permanent Magnet | 1 |
| 14***52 | Rectifier Group-Revolving | 1 |
125-2114 Heat Sink As
| 12***14 | Heat Sink As | 1 |
247-0305 Installation Ar-Generator
| 13***33 | Shim Pack; (Includes 13-Shims) | 6 |
| 24***05 | Installation Ar-Generator | 1 |
| 4B***03 | Setscrew-Square Head; (3/4-10x2-In) | 4 |
104-6203 Installation Ar-Generator
| 10***03 | Installation Ar-Generator | 1 |
166-7142 Installation Ar-Generator
| 13***33 | Shim Pack; (Includes 13-Shims) | 4 |
| 16***42 | Installation Ar-Generator | 1 |
| 4B***03 | Setscrew-Square Head; (3/4-10x2-In) | 4 |
153-0191 Installation Ar-Generator
| 11***22 | Rectifier; (Positive) | 1 |
| 11***24 | Rectifier; (Negative) | 1 |
| 11***56 | Washer; (5.6x7.8x0.5-mm Thk) | 4 |
7c-7123 Mounting Gp-Generator
| 13***33 | Shim Pack; (Includes 13-Shims) | 4 |
| 16***27 | Coupling | 1 |
| 16***31 | Adapter | 1 |
242-3487 Mounting Gp-Voltage Regulator
| 13***33 | Shim Pack; (Includes 13-Shims) | 4 |
| 24***87 | Mounting Group-Voltage Regulator | 1 |
| 24***08 | Coupling Group-Flexible; -Generator | 1 |
298-3817 Rectifier Gp-Revolving
| 03***75 | Washer; (0.266x1.25x0.06-In Thk) | 6 |
| 24***64 | Spacer; (8.5x12.7x94.3-mm Thk) | 3 |
| 29***17 | Rectifier Group-Revolving | 1 |
142-4452 Rectifier Gp-Revolving
| 13***14 | Shim; (0.157-In Thk) | 4 |
| 13***33 | Shim Pack; (Includes 13-Shims) | 1 |
| 14***52 | Rectifier Group-Revolving | 1 |
314-7755 Regulator As-Voltage -Digital
| 11***72 | Harness As-Wiring; (Rectifier) | 1 |
| 1B***75 | Bolt (" " " ); Bolt ( " " " ) | 4 |
| 29***48 | Heat Sink As | 1 |
235-5725 Regulator As-Voltage -Digital
| 11***72 | Harness As-Wiring; (Rectifier) | 1 |
| 12***14 | Heat Sink As | 1 |
| 1B***75 | Bolt (" " " ); Bolt ( " " " ) | 4 |
121-6202 Regulator Gp-Voltage -Digital
| 12***02 | Regulator Group-Voltage; -Digital | 1 |
| 21***84 | Film-Warning; (Shock, Electrocution Hazard)(Voltage Regulator) | 1 |
215-3164 Rotor Gp-Generator
| 21***64 | Rotor Group-Generator | 1 |
| 23***25 | Regulator As-Voltage; -Digital-Generator | 1 |
| 24***87 | Mounting Group-Voltage Regulator | 1 |
215-3162 Rotor Gp-Generator
| 21***62 | Rotor Group-Generator | 1 |
| 24***58 | Film-Warning; (Shock, Electrocution Hazard)(Shock, Electrocution Hazard) | 1 |
145-6000 Screen Gp-Air -Generator
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 12 |
| 10***61 | Ball Bearing | 2 |
| 12***03 | Hub-Flexible Coupling | 1 |
145-6002 Screen Gp-Air
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 12 |
| 10***61 | Ball Bearing | 2 |
| 12***03 | Hub-Flexible Coupling | 1 |
145-7561 Stator Gp-Main
| 12***45 | Screen As-Air | 2 |
| 14***61 | Stator Group-Main | 1 |
| 3E***23 | Bolt-Flange Head; (1/4-20x1-In) | 4 |
148-2622 Stator Gp-Main
| 10***51 | Screen As; (Air) | 2 |
| 14***22 | Stator Group-Main | 1 |
| 3E***23 | Bolt-Flange Head; (1/4-20x1-In) | 4 |
148-2630 Stator Gp-Main
| 00***92 | Screw-Washer Head; (1/4-20x0.5-In) | 9 |
| 03***43 | Screw; (1/4-20x0.625-In) | 17 |
| 11***44 | Cover-Stator | 1 |
Lubrication System
155-2585 Breather Gp -Crankcase
| 03***31 | Seal-O-Ring | 1 |
| 12***77 | Breather As; (Chrome)(Crankcase) | 1 |
| 13***65 | Washer; (8.8x16x2-mm Thk) | 4 |
155-2584 Breather Gp -Crankcase
| 03***31 | Seal-O-Ring | 1 |
| 12***77 | Breather As; (Chrome)(Crankcase) | 1 |
| 13***65 | Washer; (8.8x16x2-mm Thk) | 4 |
101-0838 Breather Gp -Crankcase
| 03***31 | Seal-O-Ring | 2 |
| 10***38 | Breather Group; -Crankcase | 1 |
| 10***99 | Cover As | 2 |
9y-4888 Connection Gp-Oil
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 9 |
| 0S***14 | Bolt (.25" Diameter-.50" Long) | 2 |
133-6478 Filler Gp-Engine Oil
| 10***99 | Cover As | 1 |
| 12***88 | Cap As-Engine Oil Filler | 1 |
| 13***78 | Filler Group-Engine Oil | 1 |
155-2594 Filler Gp-Engine Oil
| 12***88 | Cap As-Engine Oil Filler | 1 |
| 13***65 | Washer; (8.8x16x2-mm Thk) | 4 |
| 13***70 | Bolt; (5/16-18x1.5-In) | 4 |
153-7208 Filler Gp-Engine Oil
| 10***99 | Cover As | 1 |
| 12***88 | Cap As-Engine Oil Filler | 1 |
| 15***08 | Filler Group-Engine Oil | 1 |
7n-1875 Filler Gp-Engine Oil -Cylinder Block
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
| 2W***52 | Gasket | 1 |
| 5M***94 | Washer; Bracket To Tee, Bracket To Block, Tube As. To Tee, Tube As. To Oil Cooler | 4 |
133-6461 Filter Gp-Centrifugal
| 03***69 | Elbow-Flared; (1/2-14 Nptf) | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
| 11***42 | Support | 1 |
1w-4191 Filter Gp-Centrifugal
| 16***57 | Plate-Stiffener | 1 |
| 1W***91 | Filter Group-Centrifugal | 1 |
| 7C***15 | Cover As-Filter | 1 |
112-4921 Filter Gp-Engine Oil -Rh
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 3 |
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 3 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 5 |
115-7841 Filter Gp-Engine Oil -Lh
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 4 |
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 3 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 6 |
120-4501 Filter Gp-Engine Oil -Duplex
| 00***53 | Elbow-Pipe; (1/2-14 Nptf Thd) | 1 |
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 1 |
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 3 |
7c-6366 Gauge Gp-Oil Level (Dipstick)
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 4B***40 | Cover; (Prelubrication) | 1 |
| 4P***84 | Gauge As-Oil Level (Dipstick) | 1 |
7c-9784 Gauge Gp-Oil Level (Dipstick) -Deep Sump
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 4B***40 | Cover; (Prelubrication) | 1 |
| 5M***94 | Washer; Bracket To Tee, Bracket To Block, Tube As. To Tee, Tube As. To Oil Cooler | 4 |
129-7550 Gauge Gp-Oil Level (Dipstick)
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 12***50 | Gauge Group-Oil Level (Dipstick) | 1 |
| 13***44 | Tube As-Oil Level | 1 |
3n-4869 Hose As
| 3N***69 | Hose As | 1 |
6f-5985 Hose As
| 6F***85 | Hose As | 1 |
3n-4868 Hose As
| 3N***68 | Hose As | 1 |
3n-7223 Hose As
| 3N***23 | Hose As | 1 |
235-4434 Hose As
| 23***34 | Hose As | 1 |
| 3N***69 | Hose As | 1 |
3n-4512 Hose As
| 3N***12 | Hose As | 1 |
235-4431 Hose As
| 23***31 | Hose As | 1 |
| 3N***68 | Hose As | 1 |
3n-4905 Hose As
| 3N***05 | Hose As | 1 |
3n-4513 Hose As
| 3N***13 | Hose As | 1 |
148-8007 Lines Gp-Centrifugal Filter
| 06***63 | Connector (No. 8 Hose) | 1 |
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 2 |
| 10***34 | Grommet | 1 |
115-7860 Lines Gp-Engine Oil -Cooler
| 06***56 | Seal-O-Ring | 4 |
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 4 |
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 1 |
314-7747 Lines Gp-Engine Oil
| 06***56 | Seal-O-Ring | 4 |
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 4 |
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
229-9379 Lines Gp-Engine Oil Drain
| 19***87 | Elbow | 1 |
| 22***79 | Lines Group-Engine Oil Drain | 1 |
| 34***54 | Hose As | 1 |
5n-6241 Lines Gp-Prelubrication -Rh
| 00***63 | Elbow, 90 Deg Street, 3/4in. N.P.T. | 1 |
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 3 |
| 13***45 | Clip-Loop | 2 |
5n-6268 Lines Gp-Prelubrication -Lh
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 1 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 2 |
113-4238 Lines Gp-Prelubrication
| 03***30 | Hose As | 1 |
| 03***67 | Connector-Flared -- Adapter To Hose As. | 1 |
| 06***56 | Seal-O-Ring | 2 |
9y-2178 Lines Gp-Sump
| 3B***55 | Elbow | 1 |
| 3N***11 | Hose Assem. (96 In. Long) | 1 |
| 6B***81 | Bushing; (Reducing) | 1 |
112-5010 Lines Gp-Turbocharger Oil
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 3 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 4 |
7n-8715 Pump Gp-Engine Oil -2-Section Gear
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 6 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 9 |
| 11***49 | Gasket | 1 |
7w-0053 Pump Gp-Engine Oil -2-Section Gear
| 00***63 | Elbow, 90 Deg Street, 3/4in. N.P.T. | 1 |
| 0L***01 | Nut; (1-1/2-12-Thd) | 1 |
| 1K***37 | Elbow-Pipe | 1 |
7w-9703 Pump Gp-Sump
| 00***63 | Elbow, 90 Deg Street, 3/4in. N.P.T. | 1 |
| 0L***01 | Nut; (1-1/2-12-Thd) | 1 |
| 1K***37 | Elbow-Pipe | 1 |
7w-9704 Pump Gp-Sump
| 00***63 | Elbow, 90 Deg Street, 3/4in. N.P.T. | 1 |
| 0L***01 | Nut; (1-1/2-12-Thd) | 1 |
| 1K***37 | Elbow-Pipe | 1 |
4p-7749 Pump Gp-Sump
| 2A***62 | Screw,Cap,Hexagon H Diode Pig Tail To Grd; (1/4-20x.625 In) | 2 |
| 3N***97 | Pin-Tapered | 2 |
| 3N***99 | Gasket Set; (Includes 4 Gaskets) | 1 |
4p-7442 Pump Gp-Sump
| 00***63 | Elbow, 90 Deg Street, 3/4in. N.P.T. | 1 |
| 1K***37 | Elbow-Pipe | 1 |
| 3B***65 | Nipple-Pipe | 1 |
5n-6237 Pump Gp-Engine Oil -Manual Lubrication
| 29***87 | Seal-O-Ring | 1 |
| 4S***82 | Bolt 7.25 In. (18.42 cm) Long | 3 |
| 5N***37 | Pump Group-Sump; -Manual Lubrication | 1 |
7n-7069 Pump Gp-Sump
| 00***63 | Elbow, 90 Deg Street, 3/4in. N.P.T. | 1 |
| 0L***01 | Nut; (1-1/2-12-Thd) | 1 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
5n-4659 Regulator Gp-Oil Level
| 03***67 | Connector-Flared -- Adapter To Hose As. | 1 |
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 1 |
7w-7319 Regulator Gp-Oil Level
| 00***53 | Elbow-Pipe; (1/2-14 Nptf Thd) | 1 |
| 03***68 | Elbow (For Use With Shallow Pan) | 1 |
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
120-4514 Regulator Gp-Oil Level
| 00***53 | Elbow-Pipe; (1/2-14 Nptf Thd) | 1 |
| 03***68 | Elbow (For Use With Shallow Pan) | 1 |
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
309-2890 Shield Gp-Engine Oil Lines
| 28***32 | Tape; -Anti-Splash | 0 |
| 30***90 | Shield Group-Engine Oil Lines | 1 |
244-0480 Shield Gp-Engine Oil Lines
| 23***60 | Tape; -Anti-Splash | 0 |
| 24***80 | Shield Group-Engine Oil Lines | 1 |
244-0474 Shield Gp-Engine Oil Lines
| 24***74 | Shield Group-Engine Oil Lines | 1 |
| 25***55 | Shield-Fuel Line Fitting; (18.05-mm Id) | 2 |
| 25***07 | Bracket As | 2 |
7w-3816 Valve Gp-Fluid Control -Duplex Oil
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 2 |
| 2W***13 | Cover Assem. | 1 |
| 2W***10 | Valve As-Oil; (Duplex) | 1 |
147-3738 Valve Gp-Fluid Sampling -Oil
| 14***38 | Valve Group-Fluid Sampling; -Engine Oil | 1 |
| 7X***87 | Valve As-Fluid Sampling; (Oil Cooler) | 1 |
| 8C***45 | Cap-Dust; (Engine Oil Quick Disconnect) | 1 |
Operator Station
9y-6497 Board As-Relay
126-7155 Box Gp-Instrument Panel
| 03***67 | Stud-Weld; (3/8-16x0.75-In Oal) | 2 |
| 10***66 | Bezel | 4 |
| 10***42 | Strip-Contact | 1 |
126-7157 Box Gp-Instrument Panel
| 03***67 | Stud-Weld; (3/8-16x0.75-In Oal) | 2 |
| 10***66 | Bezel | 4 |
| 10***42 | Strip-Contact | 1 |
134-6301 Box Gp-Instrument Panel
| 03***67 | Stud-Weld; (3/8-16x0.75-In Oal) | 2 |
| 10***66 | Bezel | 3 |
| 10***42 | Strip-Contact | 1 |
126-7156 Box Gp-Instrument Panel
| 03***67 | Stud-Weld; (3/8-16x0.75-In Oal) | 2 |
| 06***38 | Screw | 4 |
| 10***66 | Bezel | 4 |
125-9746 Box Gp-Instrument Panel
| 03***67 | Stud-Weld; (3/8-16x0.75-In Oal) | 2 |
| 10***66 | Bezel | 4 |
| 10***42 | Strip-Contact | 1 |
125-7089 Box Gp-Instrument Panel
| 00***92 | Screw-Washer Head; (1/4-20x0.5-In) | 9 |
| 03***43 | Screw; (1/4-20x0.625-In) | 17 |
| 11***44 | Cover-Stator | 1 |
193-1176 Box Gp-Instrument Panel
| 10***66 | Bezel | 4 |
| 10***82 | Plate-Separator | 6 |
| 11***88 | Plate | 1 |
125-9745 Box Gp-Instrument Panel
| 03***67 | Stud-Weld; (3/8-16x0.75-In Oal) | 2 |
| 10***66 | Bezel | 3 |
| 10***42 | Strip-Contact | 1 |
162-7662 Box Gp-Instrument Panel
| 10***66 | Bezel | 4 |
| 10***82 | Plate-Separator | 6 |
| 11***74 | Module Group-Quad Gauge | 1 |
123-6008 Control Gp-Engine Monitoring
| 11***01 | Bezel | 1 |
| 12***08 | Control Group-Engine Monitoring | 1 |
| 13***56 | Film-Control Panel; (Pilot House Ems) | 1 |
144-1624 Control Gp-Engine Monitoring -Programmable Relay Control Module
| 14***35 | Plate As | 1 |
| 14***24 | Control Group-Engine Monitoring; -Programmable Relay Control Module | 1 |
| 4B***63 | Washer; (4.7x11x1.2-mm Thk) | 2 |
149-1138 Control Gp-Engine Monitoring
| 14***38 | Control Group-Engine Monitoring | 1 |
| 1S***74 | Seal-O-Ring (164.69mm Id) | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
115-4636 Control Gp-Engine Monitoring
| 11***36 | Control Group-Engine Monitoring | 1 |
| 12***72 | Seal; (135-cm) | 0 |
| 12***07 | Hinge As | 3 |
131-0217 Control Gp-Engine Monitoring
| 13***17 | Control Group-Engine Monitoring | 1 |
| 3K***82 | Fuse; (10-Ampere) | 10 |
| 9Y***82 | Film-Identification; (10-Ampere Fuse) | 1 |
122-0132 Control Gp-Engine Monitoring
| 10***66 | Bezel | 4 |
| 11***88 | Plate | 1 |
| 11***84 | Film-Identification; (Engine Monitoring)(Control) | 1 |
143-1936 Control Gp-Engine Monitoring
| 11***01 | Bezel | 1 |
| 13***19 | Control Group-Engine Monitoring | 1 |
| 13***56 | Film-Control Panel; (Pilot House Ems) | 1 |
165-4099 Control Gp-Engine Monitoring
| 16***99 | Control Group-Engine Monitoring | 1 |
158-6255 Control Gp-Engine Monitoring
| 15***55 | Control Group-Engine Monitoring | 1 |
123-6007 Control Gp-Engine Monitoring
| 11***01 | Bezel | 1 |
| 12***07 | Control Group-Engine Monitoring | 1 |
| 13***56 | Film-Control Panel; (Pilot House Ems) | 1 |
144-1623 Control Gp-Engine Monitoring -Programmable Relay
| 14***23 | Control Group-Engine Monitoring; -Programmable Relay Control Module | 1 |
131-0218 Control Gp-Engine Monitoring
| 11***01 | Bezel | 1 |
| 13***18 | Control Group-Engine Monitoring | 1 |
| 13***56 | Film-Control Panel; (Pilot House Ems) | 1 |
198-9728 Control Gp-Engine Monitoring
| 16***99 | Control Group-Engine Monitoring | 1 |
| 19***28 | Control Group-Engine Monitoring | 1 |
149-1148 Control Gp-Engine Monitoring
| 12***32 | Film-Control Panel; (Emcp Ii, Prcm) | 1 |
| 12***46 | Film-Information; (Emcp Ii, Prcm) | 1 |
| 14***23 | Control Group-Engine Monitoring; -Programmable Relay Control Module | 1 |
131-0519 Control Gp-Engine Monitoring
| 11***01 | Bezel | 1 |
| 13***19 | Control Group-Engine Monitoring | 1 |
| 13***56 | Film-Control Panel; (Pilot House Ems) | 1 |
143-5179 Control Gp-Load Share Module
| 14***79 | Control Group-Load Share Module | 1 |
137-7167 Control Gp-Monitor -Engine Vision
| 11***01 | Bezel | 1 |
| 13***22 | Control Group-Monitor; (Caterpillar Monitoring System) | 1 |
| 13***56 | Film-Control Panel; (Pilot House Ems) | 1 |
137-7168 Control Gp-Monitor -Engine Vision
| 13***96 | Module Group-System Communication | 1 |
| 13***53 | Cable | 1 |
| 13***68 | Control Group-Monitor; -Engine Vision | 2 |
145-2890 Control Gp-Monitor -Engine Vision
| 14***90 | Control Group-Monitor; -Engine Vision | 2 |
137-7169 Control Gp-Monitor -Engine Vision
| 13***69 | Control Group-Monitor; -Engine Vision | 2 |
289-6327 Control Gp-Monitor -Engine Vision
| 16***72 | Kit-Mounting; (Monitor) | 1 |
| 16***73 | Cable As; (Data) | 1 |
| 16***74 | Cable As-Power | 1 |
163-3970 Control Gp-Monitor -Engine Vision
| 16***70 | Control Group-Monitor; -Engine Vision | 1 |
| 8C***88 | Seal-Security | 1 |
131-0230 Control Gp-Monitor
| 13***30 | Control Group-Monitor | 1 |
| 30***83 | Control As-Governor; -Load Share | 1 |
132-0449 Control Gp-Monitor -Engine Vision
| 11***01 | Bezel | 1 |
| 12***34 | Control Group-Electronic; (Ems) | 1 |
| 12***42 | Film-Monitor; (Ems) | 1 |
212-7481 Control Gp-Monitor -Engine Vision
| 21***81 | Control Group-Monitor; -Engine Vision | 1 |
| 3E***99 | Plate-Marking | 1 |
| 8C***88 | Seal-Security | 1 |
122-0133 Control Gp-Monitor
| 12***33 | Control Group-Monitor | 1 |
| 13***59 | Control As-Governor; -Load Share | 1 |
112-2974 Module Gp-Quad Gauge
| 11***74 | Module Group-Quad Gauge | 1 |
| 16***72 | Kit-Mounting; (Monitor) | 1 |
| 16***73 | Cable As; (Data) | 1 |
166-6941 Module Gp-Quad Gauge
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 16***41 | Module Group-Quad Gauge | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 7 |
122-0143 Module Gp-Quad Gauge
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 12***43 | Module Group-Quad Gauge | 1 |
| 3E***89 | Wedge-Receptacle Lock; (8-Pin) | 1 |
122-0144 Module Gp-Quad Gauge
| 11***01 | Bezel | 1 |
| 12***44 | Module Group-Quad Gauge | 1 |
| 15***54 | Module Group-Quad Gauge | 1 |
166-6936 Module Gp-Quad Gauge
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 16***36 | Module Group-Quad Gauge | 1 |
| 3E***83 | Wedge-Receptacle Lock; (6-Pin) | 1 |
153-8054 Module Gp-Quad Gauge
| 11***01 | Bezel | 1 |
| 15***54 | Module Group-Quad Gauge | 1 |
| 16***39 | Module Group-Quad Gauge | 1 |
166-6937 Module Gp-Quad Gauge
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 16***37 | Module Group-Quad Gauge | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 7 |
166-6939 Module Gp-Quad Gauge
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 16***39 | Module Group-Quad Gauge | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 7 |
153-8057 Module Gp-Quad Gauge
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 15***57 | Module Group-Quad Gauge | 1 |
| 3E***83 | Wedge-Receptacle Lock; (6-Pin) | 1 |
117-9015 Module Gp-Quad Gauge
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***15 | Module Group-Quad Gauge | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 7 |
166-6929 Module Gp-Quad Gauge
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 16***29 | Module Group-Quad Gauge | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 7 |
153-8056 Module Gp-Quad Gauge
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***01 | Bezel | 1 |
| 12***45 | Control Group-Engine Monitoring | 1 |
118-8582 Module Gp-Quad Gauge
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***82 | Module Group-Quad Gauge | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 7 |
112-2975 Module Gp-Quad Gauge
| 11***75 | Module Group-Quad Gauge | 1 |
| 16***72 | Kit-Mounting; (Monitor) | 1 |
| 16***73 | Cable As; (Data) | 1 |
123-7450 Module Gp-Relay Driver
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***50 | Module Group-Relay Driver; Control Gp-Engine Monitoring | 1 |
| 3E***83 | Wedge-Receptacle Lock; (6-Pin) | 1 |
122-0125 Module Gp-Speedometer & Tach
| 12***25 | Module Group-Speedometer & Tach | 2 |
153-8060 Module Gp-Speedometer & Tach
| 11***01 | Bezel | 1 |
| 15***57 | Module Group-Quad Gauge | 1 |
| 15***60 | Module Group-Speedometer & Tach | 1 |
144-0884 Module Gp-Speedometer & Tach
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***01 | Bezel | 1 |
| 12***26 | Control Group-Engine Monitoring | 1 |
140-3689 Module Gp-Speedometer & Tach
| 11***01 | Bezel | 1 |
| 14***89 | Module Group-Speedometer & Tach | 1 |
| 15***60 | Module Group-Speedometer & Tach | 1 |
122-0124 Module Gp-Speedometer & Tach
| 12***24 | Module Group-Speedometer & Tach | 1 |
| 12***30 | Film-Identification; (Caterpillar)(Emcpii Relay Driver Module) | 1 |
| 2D***63 | Bolt; (1/4-28x1.75-In) | 2 |
144-0885 Module Gp-Speedometer & Tach
| 14***85 | Module Group-Speedometer & Tach | 2 |
102-8627 Module Gp-System Communication
| 10***27 | Module Group-System Communication | 1 |
| 11***01 | Bezel | 1 |
| 14***89 | Module Group-Speedometer & Tach | 1 |
130-6190 Module Gp-System Communication
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 13***90 | Module Group-System Communication | 1 |
| 3E***83 | Wedge-Receptacle Lock; (6-Pin) | 1 |
130-6191 Module Gp-System Communication
| 13***91 | Module Group-System Communication | 1 |
| 16***40 | Module Group-System Communication | 1 |
225-0774 Module Gp-System Communication
| 22***74 | Module Group-System Communication | 2 |
130-6196 Module Gp-System Communication
| 13***91 | Module Group-System Communication | 1 |
| 13***96 | Module Group-System Communication | 1 |
164-8940 Module Gp-System Communication
| 10***85 | Battery; (Lithium)(Internal Backup) | 1 |
| 10***38 | Film-Interface; (Communication Module)(Rear) | 1 |
| 13***51 | Film-Control Panel; (Front) | 1 |
197-7029 Mounting Gp-Control Panel
| 10***85 | Battery; (Lithium)(Internal Backup) | 1 |
| 10***37 | Film-Display; (Communication Module) | 1 |
| 10***38 | Film-Interface; (Communication Module)(Rear) | 1 |
229-8320 Mounting Gp-Instrument Panel
| 12***87 | Mount-Flexible | 4 |
| 13***98 | Bracket | 2 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 6 |
121-3325 Mounting Gp-Instrument Panel
| 03***67 | Stud-Weld; (3/8-16x0.75-In Oal) | 1 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
| 10***53 | Bracket As | 1 |
134-6299 Mounting Gp-Instrument Panel
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 2 |
230-3236 Mounting Gp-Instrument Panel
| 12***87 | Mount-Flexible | 4 |
| 19***99 | Bracket | 2 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 6 |
120-4516 Mounting Gp-Instrument Panel
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 2 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 2 |
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 2 |
107-2855 Mounting Gp-Instrument Panel -Lh
| 10***55 | Mounting Group-Instrument Panel; -Lh | 1 |
| 10***38 | Film-Interface; (Communication Module)(Rear) | 1 |
320-1336 Panel Gp-Annunciator
| 10***39 | Plate-Separator | 5 |
| 11***14 | End-Wire; (18-Ga) | 50 |
| 11***23 | Block-Contact; (1-Pole)(Normally Open) | 1 |
309-0031 Panel Gp-Annunciator
| 1F***50 | Nut Rops Support | 10 |
| 22***19 | Bracket As | 1 |
| 22***20 | Mounting Group-Instrument Panel | 1 |
197-7037 Panel Gp-Annunciator
| 12***87 | Mount-Flexible | 4 |
| 19***37 | Panel Group-Annunciator | 1 |
| 22***17 | Bracket | 2 |
123-8212 Panel Gp-Pilot House Instr
| 10***07 | Switch-Operator; (Secondary Stop Push Button) | 1 |
| 11***24 | Block-Contact; (1-Pole)(Normally Closed) | 1 |
| 11***15 | Module Group-Quad Gauge | 1 |
123-8210 Panel Gp-Pilot House Instr
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 2 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 2 |
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 2 |
123-8211 Panel Gp-Pilot House Instr
| 11***15 | Module Group-Quad Gauge | 1 |
| 12***24 | Module Group-Speedometer & Tach | 1 |
| 12***32 | Control Group-Engine Monitoring | 1 |
120-4503 Pyrometer Gp -Panel, Rh
| 10***07 | Switch-Operator; (Secondary Stop Push Button) | 1 |
| 11***24 | Block-Contact; (1-Pole)(Normally Closed) | 1 |
| 11***15 | Module Group-Quad Gauge | 1 |
193-1204 Pyrometer Gp -Lh
| 11***10 | Pyrometer Group; (Rh) | 1 |
| 12***02 | Harness As-Panel; (Pyrometer)(Lh) | 1 |
| 19***04 | Pyrometer Group; -Lh | 1 |
193-1203 Pyrometer Gp -Rh
| 11***10 | Pyrometer Group; (Rh) | 1 |
| 12***01 | Harness As-Panel; (Pyrometer)(Rh) | 1 |
| 19***03 | Pyrometer Group; -Rh | 1 |
114-2049 Pyrometer Gp
| 10***07 | Switch-Operator; (Secondary Stop Push Button) | 1 |
| 11***24 | Block-Contact; (1-Pole)(Normally Closed) | 1 |
| 11***49 | Pyrometer Group | 1 |
120-4504 Pyrometer Gp -Panel, Lh
| 03***13 | Screw-Forming; (10-24x0.37-In) | 4 |
| 03***49 | Nut-Self Lock; (No.10.Unc) | 4 |
| 11***10 | Pyrometer Group; (Rh) | 1 |
Service Equipment And Supplies
6l-4502 Chart-Plate & Film
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
7e-3127 Kit-Sensor Pocket -Temperature Contactor
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
Parts Group-Miscellaneous
137-8533 Shim Pack
| 10***08 | Film-Information; (Engine Oil)(Install On Oil Filter Cap) | 1 |
| 11***52 | Plate & Film Group; -Engine Information | 1 |
| 13***33 | Shim Pack; (Includes 13-Shims) | 1 |
280-9432 Tape -Anti-Splash
| 28***32 | Tape; -Anti-Splash | 1 |
237-3860 Tape -Anti-Splash
| 13***34 | Shim; (0.025-mm Thk) | 1 |
| 13***35 | Shim; (0.0508-mm Thk) | 1 |
| 13***36 | Shim; (0.076-mm Thk) | 1 |
237-3859 Tape -Anti-Splash
| 23***59 | Tape; -Anti-Splash | 1 |
3508B serial number reference
The PIN/serial tag is a riveted metal plate on the engine block, typically on the left side near the flywheel housing or front timing cover; some units also carry a duplicate stamp on the block casting itself. The first three characters are the serial prefix, tied to one build lot/configuration (marine propulsion, marine genset, industrial, locomotive, reman, etc.); the digits that follow are the sequential unit number within that lot, starting near 00001 for the first unit built. Because the same 3508B long block was sold under many different prefixes depending on application, always match the prefix against a current dealer reference or Cat SIS rather than assuming by rating alone.
| Prefix | Identifies | Notes |
|---|---|---|
| 7SM | Marine propulsion engine (DITA) | Seen on paired propulsion installations (twin-engine sets) with consecutive unit numbers. |
| S2E | Marine propulsion engine (DITA) | Part of the S2-prefix marine block (S2A/S2B/S2D/S2E/S2F). |
| S2B | Marine propulsion engine | S2-prefix marine block; seen paired with a 3DM-prefixed sister unit on a twin installation. |
| S2F | Marine propulsion engine | S2-prefix marine block; has its own standalone factory service manual, separate from S2E. |
| S2A | Marine propulsion engine | S2-prefix marine block. No individual in-service unit found to cross-check the exact build range — confirm with dealer. |
| S2D | Marine propulsion engine | S2-prefix marine block. No individual in-service unit found to cross-check the exact build range — confirm with dealer. |
| 3DM | Marine propulsion engine / marine generator set | Same prefix covers both a bare propulsion engine and a packaged marine generator set in the 868-910 kW class. |
| 1TW | Marine propulsion engine | Listed for 3508B marine in dealer reference tables. No individual nameplate example found — confirm with dealer. |
| 2BM | Marine propulsion engine | Listed for 3508B marine in dealer reference tables. No individual nameplate example found — confirm with dealer. |
| 3DW | Marine propulsion engine | Listed for 3508B marine in dealer reference tables. No individual nameplate example found — confirm with dealer. |
| BAG | Marine propulsion engine | Listed for 3508B marine in dealer reference tables. No individual nameplate example found — confirm with dealer. |
| LPD | Marine generator set, military-spec package | Opens the build range for this military-pattern marine genset package in the factory parts-catalog structure. |
| EGB | Marine propulsion engine (DITA) | Found once, on a used-engine listing with a matching arrangement number. Not present in dealer prefix tables — confirm with dealer before relying on this one. |
| 2HW | Generator-set engine (bare engine for genset packaging) | Bare engine build for genset packaging, distinct from the complete packaged-set prefixes below. |
| 3LS | Generator-set engine (bare engine for genset packaging) | Same category as 2HW/4GM/6PN/ZAD. |
| 4GM | Generator-set engine (bare engine for genset packaging) | Same category as 2HW/3LS/6PN/ZAD. |
| 6PN | Generator-set engine (bare engine for genset packaging) | Same category as 2HW/3LS/4GM/ZAD. |
| ZAD | Generator-set engine (bare engine for genset packaging) | Same category as 2HW/3LS/4GM/6PN. |
| 5KW | Packaged generator set, land-based | Complete packaged set, separate from the bare genset-engine prefixes above. Some dealer prefix tables instead group this one with the bare gen-set-engine prefixes rather than the packaged sets — treat the exact sub-category as approximate. |
| CNB | Packaged generator set, land-based | Complete packaged set, same category as 5KW/PTJ/PTN. |
| PTJ | Packaged generator set, land-based | Complete packaged set, same category as 5KW/CNB/PTN. |
| PTN | Packaged generator set, land-based | Complete packaged set, same category as 5KW/CNB/PTJ. |
| KAM | Certified reman engine, land-based | Remanufactured-engine prefix specific to the 3508B, not the related 3508 or 3508C block. A couple of dealer prefix tables instead file it under generator-set rather than reman — sub-category is approximate, but the 3508B linkage is solid. |
| 5XS | Certified reman engine, land-based | Reman-line prefix; also appears as its own category in the factory parts-catalog structure. |
| BTB | Certified reman engine, land-based | Same reman category as KAM/5XS/BTR/BWA. |
| BTR | Certified reman engine, land-based | Same reman category as KAM/5XS/BTB/BWA. |
| BWA | Certified reman engine, land-based | Same reman category as KAM/5XS/BTB/BTR. |
| 7AF | Industrial mechanical-drive engine, land-based | Land-based industrial application, not marine. |
| BPX | Industrial mechanical-drive engine, land-based | Land-based industrial application, not marine. |
| CBB | Industrial mechanical-drive engine, land-based | Land-based industrial application, not marine. |
| 5PS | Locomotive (rail) engine | Rail application build of the 3508B block. |
Frequently asked questions
What engine configuration does the Caterpillar 3508B use?
The 3508B is a 60-degree V-8, four-stroke diesel of 34.5 L (2105 cu in) displacement, with a 170 x 190 mm (6.7 x 7.5 in) bore and stroke and a 14:1 compression ratio. It runs dual turbochargers with aftercooling and Caterpillar's ADEM II electronic governor driving electronic unit injectors, with onboard monitoring and protection.
What is the operating weight of the Caterpillar 3508B?
Dry engine weight runs roughly 4,880-5,220 kg (10,760-11,500 lb), varying by rating package (lighter on the high-performance propulsion build, heavier on the constant-speed auxiliary/generator-drive build), cooling arrangement, and marine gear or genset accessories fitted. Check the build sheet for your specific configuration for an exact figure.
What replaced the Caterpillar 3508B?
Caterpillar's 3508C succeeded the 3508B in marine service. It carries the same 34.5 L V-8 block forward but adds separate-circuit aftercooling and updated electronics to meet IMO II and EPA Tier 2 emissions limits the 3508B was not built to meet.
What 3508B owners discuss
Keel cooler or heat exchanger — which cooling setup does a 3508B marine propulsion engine actually run, and what upkeep does each style demand?
Both layouts show up on this engine depending on the vessel. A keel-cooled boat runs jacket water through cooling plates or pipe welded to the hull, so raw water never touches the engine; that avoids raw-water fouling inside the block but the keel cooler area has to be sized for this engine's jacket-water temperature, and a keel cooler that's marginal for the rating runs hot in warm water or heavy load. A heat-exchanger boat pulls raw water through a flexible-impeller pump; that impeller is the wear item. Owners report vane wear or set showing up well before a year of running, so a 100 to 200 hour visual check (sooner with weak flow or rising coolant temp) is standard practice, and running the pump dry for even 30 seconds burns the impeller. On either setup, the aftercooler core is a known trouble spot: moisture sitting between the brass end tanks and aluminum tube bundle corrodes the joint over time, and a cooler left uncleaned for years becomes very hard to split apart for service later.
What turbocharger and aftercooler wear pattern shows up on this engine after years of marine service?
The recurring theme is aftercooler-driven heat soak rather than turbo failure itself. A fouled or corroded aftercooler core lets charge air run hotter than it should, and sustained moderately elevated cylinder temperatures over time contribute to premature cylinder wear even though the turbo keeps spinning fine. Turbo inspection and rebuild-or-replace intervals in the 2,000 to 3,000 hour range are typical guidance for this engine family, though the real number varies by duty cycle and rating. Practical takeaway from the field: pull and inspect the aftercooler on its own schedule instead of waiting for a turbo symptom, since corrosion at the tube-to-header joint is progressive and the cooler gets harder to service the longer it's left.
What fuel-system behavior and injector quirks do people flag on the 3508B specifically?
This engine moved to electronic unit injectors running 10 to 20 percent higher injection pressure than the rest of the 3500 family, so the injection actuation hardware was built up to match — expect injector inspection/clean/replace intervals in the neighborhood of 2,000 hours as a baseline, adjusted for fuel quality and duty. The most common real-world no-start complaint traces back to prestart fuel pressure, not the injectors: the electric lift pump on the day tank should hold a stable pressure around 207 kPa (30 psi) before cranking, and if it only creeps up a pound or two during cranking that points to a weak lift pump, a clogged filter element, or air ingress rather than injector failure. Separately, water-in-fuel cases on this engine have been traced to a failed weld or seam in the fuel tank or vent line letting water in directly, not just to filter/separator issues — worth checking the tank itself if you're pulling water repeatedly. Because a fuel-delivery fault can strand a vessel underway, have your dealer verify the diagnosis before returning the engine to service.
What ADEM governor and load-sharing quirks come up on twin-engine 3508B installations?
The 3508B brought electronic unit injection under Caterpillar's ADEM engine management (an early ADEM generation, later engines moved to newer ADEM revisions), giving infinitely variable injection timing and self-diagnosing sensors in place of the older engine's mechanical/hydraulic governor. On a twin-engine boat, load sharing and clean shutdown both depend on the governor's droop setting. A documented failure mode: a rebuilt or replacement engine gets fitted with a governor that looks identical and carries the same model designation but a different internal specification, and the boat won't share load with its mate or shuts down incorrectly. The fix is checking exact governor spec and droop against the sister engine, not chasing the ECM program. A secondary speed/timing signal fault traced to wiring or connector corrosion at the sensor is also a recurring complaint on this model — check wiring before condemning the sensor or control module. Because load-sharing and shutdown are safety functions on a twin-engine vessel, have your dealer verify governor spec and droop settings after any engine swap.
What should a shaft-alignment or marine-gear check catch on a 3508B propulsion install?
This engine drives the reduction/reverse gear through a torsionally flexible coupling that absorbs the pulsing torque from cylinder firing, but that coupling does not correct real shaft misalignment. Side-loading from a misaligned coupling accelerates wear on the shaft bearings, cutlass bearing, seals, and the coupling itself, and left long enough it can damage the reduction gear teeth. Precision alignment at commissioning and again whenever the engine or gear is pulled for service is the standard recommendation, checked to the gear maker's tolerance rather than by eye. Because a coupling or gear failure underway is a propulsion-loss safety issue, have your dealer or a qualified alignment tech verify alignment readings before returning the vessel to service.
Is there a known valve-train wear pattern on the 3508B that gets missed on a normal service schedule?
Yes — push rod wear on this engine (reported on a DITA-rated unit) escalates fast once tappet lash inspection slips past its interval. The push rod surface is hardened but the core underneath is comparatively soft, so once wear breaks through that hardened layer, material loss accelerates quickly and can progress toward seizure and serious engine damage if it's not caught. Keeping valve/tappet lash inspection on its normal interval (roughly the 1,500 hour range cited for this engine family, though it varies by configuration) rather than stretching it is what prevents this — the amount of lash movement allowed to develop before that scheduled check is what determines whether the push rod survives. Have your dealer verify lash readings at the next scheduled inspection if you suspect the interval has been stretched.
What should a buyer check before purchasing a used 3508B marine propulsion engine?
Because this is a B-spec, ECM-equipped engine, it carries its own onboard service history: running hours, fuel totals, and fault/event log. Pull that ECM log and compare it against the mechanical hour meter — any real discrepancy between the two is a serious red flag. Ask for an oil analysis trend rather than a single sample, and for survey data (compression and blow-by) if the seller has had one done; a documented in-frame or major overhaul with paperwork is worth more than a low indicated-hours engine with no history behind it. Confirm which rating class the hours were accumulated under (standby, prime, or continuous duty) since that changes both remaining life expectation and price. On the physical side, ask about aftercooler and turbo inspection history and which cooling arrangement it runs (keel-cooled versus heat exchanger), since that tells you what corrosion or fouling risk comes with the engine. Have your dealer verify governor spec, ECM fault history, and coupling/alignment condition before committing to purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Caterpillar 3508B. Related factory variants of the same model family:
3508B3508B3508B3508B3508B3508B3508B3508B3508B
Need a specific 3508B part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.