Caterpillaroem solutionsmobile hyd power unit
Caterpillar 336D L
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 336D L OEM Solutions unit is a Mobile Hydraulic Power Unit (MHPU), not the standard 336D L digging excavator it shares a model number with. It is a frontless tracked carrier built on the D-series 336-size excavator platform: Cat C9 ACERT diesel, factory hydraulic pump and valve package, undercarriage, and cab, sold through Cat's OEM Solutions channel to boom and demolition-tool integrators rather than as a complete dealer machine. The C9 ACERT is a turbocharged, air-to-air aftercooled inline six-cylinder diesel rated around 200 kW (268 hp) net at 1800 rpm in the reference configuration; actual governing varies with the pump duty the integrator's boom and tool circuit demands. Cat documents two arrangements of this power unit: a base configuration (M3M serial prefix) and a demolition-conversion arrangement (M3N prefix) built for heavier guarding and tool-intensive work. It ships without a standard boom, stick, or bucket and without a published operating weight, since finished weight depends on the front end and counterweight the integrator fits. It was built during the D-series 336D L platform's production window, roughly 2008 to 2014, though Cat does not publish separate model years for this low-volume carrier variant specifically.
This carrier is part of a wider D-series OEM Solutions Mobile Hydraulic Power Unit lineup spanning several excavator sizes, including a companion 330D L MHPU built and documented alongside it. When Cat's D2-generation excavator platform arrived, the OEM Solutions concept carried forward as the 336D2 OEM, the direct successor to this unit, keeping the same C9-family engine and factory pump/valve package formula. Because these units were built to order for boom and demolition-tool integrators and never sold as a retail excavator, surviving examples are scarce and usually turn up already fitted with a third-party boom rather than bare. That scarcity cuts both ways in the parts market: complete documented units are hard to find, but because the carrier shares its engine, hydraulic pump/valve package, undercarriage, and cab with the far more common 336D L excavator, most day-to-day service parts still cross over to that mainline machine's catalog.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 336D L specifications
Engine
| Engine model | Cat C9 with ACERT Technology, inline 6-cylinder, turbocharged, air-to-air aftercooled. Caterpillar's own factory manual for this power-unit line, titled for the 336D and 336D L Mobile Hydraulic Power Unit and covering both prefix ranges, is built around this engine. |
| Net power | 200 kW (268 hp) at 1800 rpm, net per ISO 9249. This is the standard rating for the C9 ACERT in this carrier size class. A power unit built for an OEM integrator can be governed to a different setting to match the customer's pump duty cycle, so treat this as the reference rating rather than a fixed figure for every build. |
| Displacement | 8.8 L (537 cu in) |
| Bore and stroke | 112 mm x 149 mm (4.41 in x 5.87 in) |
| Emissions tier | Meets U.S. EPA Tier 3 / EU Stage IIIA equivalent limits for this ACERT engine tier (also meets Japan 2006 Tier 3 and China Stage III). |
Weights
| Operating weight | Not published as a single figure. This power unit ships as a bare carrier (engine, hydraulics, undercarriage, cab, counterweight) without a standard digging boom, stick, or bucket. Total in-service weight depends on the front attachment and counterweight the OEM integrator fits, so no fixed operating weight applies across builds. |
| Shipping weight | Not documented for this configuration. Shipping weight depends on how the integrator packages and transports the bare carrier. |
| Ground pressure | Not published for this configuration. Ground pressure depends on the track shoe width selected and the completed machine's final weight after front-end integration, neither of which is fixed for a bare power unit. |
Dimensions
| Transport length | Not published as a fixed figure. With no standard boom and stick fitted, overall transport length is set entirely by whatever front attachment the OEM integrator installs. |
| Transport width and height | Not separately documented for this power-unit configuration in available factory literature. |
| Undercarriage / track gauge | Not separately published for this configuration. Confirm the exact undercarriage arrangement (gauge, shoe width) for a given build with Cat OEM Solutions or an authorized dealer, since carrier undercarriages in this program are offered in more than one arrangement. |
Performance
| Maximum travel speed | About 5 km/h (3.1 mph). Travel speed is set by the carrier's undercarriage and final drives, which do not depend on which front attachment is fitted, so this figure is expected to carry over from the base chassis platform. |
| Maximum drawbar pull | About 300 kN (67,400 lbf), from the same undercarriage and final-drive package as the base chassis. |
| Gradeability | Not published for this configuration. |
| Swing speed and torque | Not documented for this generation's power unit in available literature. |
Service capacities (summary)
| Fuel tank | 620 L (163.8 US gal) |
| Engine oil | 40 L (10.6 US gal) |
| Cooling system | 40 L (10.6 US gal) |
| Hydraulic system | Not separately confirmed for this configuration. Final hydraulic tank sizing depends on the OEM integrator's circuit design and the work function driven off the carrier. |
| Swing drive / final drive (each) | About 19 L (5.0 US gal) for the swing drive and about 8 L (2.1 US gal) per final drive, per the drivetrain components shared with this chassis platform. |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
336D L fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 40 L (10.6 US gal) | Cat DEO or Cat DEO-ULS multigrade diesel engine oil. SAE 10W-30 for ambient -18C to 40C (0F to 104F); SAE 15W-40 for -9.5C to 50C (15F to 122F); Cat DEO-ULS SYN or Cat DEO Cold Weather 0W-40 below -20C (-4F) for cold-start protection. Capacity carried from the shared C9 ACERT engine platform used across the 336D L excavator family; the MHPU factory manual confirms the same C9 engine but no MHPU-specific refill table was found in available literature - verify against this unit's OMM by serial prefix. |
| Cooling system | 40 L (10.6 US gal) | Cat ELC (Extended Life Coolant), premixed 50/50 water-glycol OAT formula; no supplemental coolant additive needed on the standard service interval. Same platform-shared figure and verification caveat as the engine crankcase row above. |
| Fuel tank | 620 L (163.8 US gal) | Cat-approved No. 2-D diesel meeting ASTM D975 (or EN 590 in Europe); use ultra-low-sulfur diesel (15 ppm or less) to protect the C9 ACERT fuel system. Winter-blended fuel or an anti-gel additive is recommended in cold climates. Same platform-shared figure and verification caveat as above - the demolition-carrier body style may carry a different tank size than the standard excavator; confirm against this unit's OMM. |
| Swing drive | 19 L (5.0 US gal) | Cat TDTO (Transmission/Drive Train Oil). TDTO 10W for cold ambient, TDTO 30 for normal operating range; Cat TDTO-TMS synthetic blend gives wider all-season coverage. Figure taken from the shared C9-engine 336D L base-machine platform (undercarriage and swing mechanism are common to the excavator and MHPU chassis); not separately confirmed in MHPU-specific literature. |
| Final drive (each) | 8 L (2.1 US gal) per side | Cat TDTO, same grade selection as the swing drive (TDTO 10W / TDTO 30 / TDTO-TMS by climate). Same platform-shared figure and verification caveat as the swing drive row. |
| Hydraulic system, including tank | Not published for the MHPU power-unit variant specifically. The shared C9-engine 336D L excavator platform lists 410 L (108.3 US gal) total system capacity - reference only, do not treat as confirmed for the MHPU chassis. | Cat HYDO Advanced (mineral hydraulic oil, multiple viscosity grades selected by climate). Cat BIO HYDO Advanced (biodegradable hydraulic oil) is a documented factory/service option on this specific MHPU model - its own service literature includes a dedicated biodegradable hydraulic oil filter procedure, consistent with demolition-carrier units built for environmentally sensitive urban sites. |
| Hydraulic tank | Not published for the MHPU power-unit variant specifically. The shared C9-engine 336D L excavator platform lists a 175 L (46.2 US gal) tank refill - reference only; the MHPU's standalone power-unit hydraulic package may size the tank differently. Verify against this unit's OMM. | Same fluid recommendation as the hydraulic system row: Cat HYDO Advanced standard, Cat BIO HYDO Advanced as a documented option for this MHPU. |
| Grease (spec only) | No refill capacity specified - lubricated per grease point on a schedule, not a system fill. | Cat multipurpose extreme-application grease (NLGI 2), such as Cat Advanced 3Moly Grease, for track, undercarriage, and boom/remote greasing-block points. Cat's climate guidance calls for a softer NLGI 1 or NLGI 0 grade in cold ambient conditions (below about -10C/14F) for easier pumpability. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 336D L maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
| Every 6,000 h |
|
Servicing the 336D L beyond the schedule
Predictive Maintenance and Fluid Analysis
Sample fluids on this carrier tighter than the standard chart. The C9 ACERT under near-continuous hammer or shear duty runs closer to sustained heavy load than typical dig-and-swing work, so pull engine, hydraulic, and coolant oil samples at every 250-hour service instead of waiting for 500. Track case-drain flow on the hydraulic pump/valve package to catch internal wear before a shuttle valve or resolver fault slows function response. Watch injector trends too; premature wear is a known C9 ACERT pattern that shows up as smoke with no fault code.
Corrective and Common Repairs
Isolate faults between the factory carrier and the integrator-installed boom and tool circuit before condemning parts. A weak or slow hydraulic function often traces to a jammed resolver or shuttle valve reading pump signal pressure, not the pump itself. High case-drain flow points to internal motor or pump wear. Engine sensor faults on the C9 ACERT can mask each other, so verify actual output against spec with a multimeter before swapping parts. Check ECM-to-cab harness connectors for corrosion, especially near any splice the tool integrator added for its control interface.
Overhaul and Rebuild Points
Plan overhaul intervals around this carrier's duty cycle, not a standard dig-and-swing chart. Piston ring and cylinder liner wear on the C9 ACERT tracks with soot loading, so tighten oil sampling under sustained hammer or shear work to catch it early. Rebuild the hydraulic pump and valve package on measured case-drain wear trends, not a fixed hour number. Track links, idlers, and rollers wear from swinging a heavy custom front over rubble, not from digging loads, so replace undercarriage components on condition rather than the excavator's stock schedule.
Seasonal and Environment Servicing
Match engine oil and grease grade to ambient temperature: switch to a colder-rated Cat DEO viscosity or a softer NLGI 1/0 grease below about -10C (14F) for easier pumpability at undercarriage and frame points. On urban demolition and recycling sites, clear debris from the sloped track-frame area and inspect P5A-rated cab glass and window guards for impact damage before every shift. If the unit runs Cat BIO HYDO Advanced for environmentally sensitive sites, follow its dedicated biodegradable hydraulic filter procedure rather than the standard mineral-oil filter service.
336D L common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 220-8678 | Seal-Ring | Fuel system service | Check fitment → |
| 326-1644 | Filter As-Water Sep & Fuel | Fuel system service | Check fitment → |
| 289-6766 | Liner, Fuel Filter Head | Fuel system service | Check fitment → |
| 1R-0762 | Filter As-Fuel | Fuel system service | Check fitment → |
| 142-1339 | Filter Element As-Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
336D L fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 100-01 | Low engine oil pressure warning | Oil pump wear, low oil level, plugged filter, or worn engine bearings dropping system pressure below the calibrated threshold | Stop and idle down immediately, check oil level and condition, check filter condition and pressure at a test port before restarting under load |
| 100-03 / 100-04 | Engine oil pressure sensor circuit voltage above/below normal | Open or shorted sensor wiring, corroded connector, or a failed pressure sensor | Inspect sensor connector and harness for damage or corrosion, check sensor supply voltage, replace the sensor if wiring tests good |
| 110-00 | Engine coolant temperature above normal (warning, can lead to automatic derate) | Low coolant level, plugged radiator core or fan drive fault, failed thermostat, or heavy load at high ambient temperature | Let engine cool, check coolant level and radiator/core for debris, verify fan drive and thermostat operation before returning to full load |
| 110-03 / 110-04 | Engine coolant temperature sensor circuit voltage above/below normal | Damaged or corroded sensor wiring/connector, or a failed coolant temperature sensor | Inspect wiring and connector, verify sensor resistance against spec at a known temperature, replace sensor if out of range |
| 190-08 | Engine speed/timing sensor signal abnormal (erratic frequency or pulse width) | Incorrect sensor-to-tone-wheel air gap, a damaged tone wheel tooth, or a corroded sensor connector | Check and reset sensor air gap, inspect tone wheel for damage, clean and reseat the connector |
| 1-05 / 1-06 (repeats per cylinder, e.g. 2-05, 3-06) | Cylinder injector solenoid circuit open (05) or shorted (06) | Damaged injector harness, corroded connector, or a failed injector solenoid coil | Inspect injector harness and connector for continuity and shorts, measure solenoid resistance, test the circuit with the engine diagnostic tool before replacing the injector |
| 168-00 / 168-01 / 168-02 | System (battery) voltage high, low, or intermittent/unstable | Weak or sulfated battery, loose or corroded battery/ground terminals, or a faulty charging system | Check battery state of charge and terminal condition, test alternator output, inspect main power and ground connections for corrosion |
| 94-03 / 94-04 | Fuel pressure sensor circuit voltage above/below normal | Damaged sensor wiring or connector, or a failed fuel pressure sensor | Inspect sensor wiring and connector, verify sensor supply voltage, replace sensor if wiring checks out good |
| 41-03 / 41-04 | 8V DC sensor supply circuit shorted to battery voltage or to ground | A shorted sensor or harness segment pulling the shared 8V reference rail high or low, affecting multiple sensors at once | Disconnect sensors on the shared supply one at a time to isolate the short, repair or replace the faulty harness section or sensor |
| 102-03 / 102-04 / 102-10 | Boost (turbocharger outlet/intake manifold) pressure sensor circuit fault or abnormal rate of change | Damaged sensor wiring, a pinched or contaminated sense line, or a failed boost pressure sensor | Inspect wiring, connector, and sense line for damage or blockage, verify sensor output against a known reference before replacing it |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
336D L attachments & work tools
Demolition tool compatibility
This 336D L designation is the Cat OEM Solutions Mobile Hydraulic Power Unit (MHPU, engine/pump arrangement prefix M3M) — a frontless carrier, not the standard digging excavator. Cat does not catalog a fixed bucket/tool lineup for the bare power unit; the OEM integrator mounts its own boom and demolition tool (shear, pulverizer, multi-processor, or hydraulic hammer) sized to the class, so tool capacity varies by the integrator's boom/reach design rather than a Cat-published list.
Coupler and attachment hydraulic circuit
The power unit shares its excavator-derived hydraulic base with the contemporary D-series 320D-336D range, including a universal quick-coupler attachment circuit and a combined-function medium-pressure circuit for rotating or multi-function tools. OEM integrators tie their boom-mounted tool circuit into these factory-provided attachment lines rather than adding a separate aftermarket coupler system.
Power unit arrangement
The MHPU is offered in more than one power arrangement (diesel-engine driven, with an AC/electric-motor-driven variant also offered in the wider MHPU line); the 336D L M3M arrangement documented for this model uses the same C9 ACERT diesel as the standard 336D L excavator. Pump and valve arrangement is matched to the OEM's boom and tool hydraulic demand rather than fixed at the factory.
Demolition guarding and cab protection
Factory-documented guarding for this demolition-carrier platform includes P5A-rated laminated front and roof glass, mesh or bar-type window guards over the front glass, and a rear door/engine-compartment guard kit for debris and impact protection. A protected, sloped track-frame arrangement is also offered to reduce debris buildup in demolition and recycling duty.
Security and stability options
An optional factory Machine Security System (keyed operator lockout) is available on this platform. Additional counterweight is offered as a factory option to hold stability once the OEM's boom and demolition tool are mounted, since reach and tool weight are added after the base unit leaves Cat.
Base carrier scope (OEM building block)
As sold, the unit supplies the engine, main hydraulic pump/valve package, undercarriage, and cab as the core carrier only; boom, stick or high-reach arrangement, tool mounting, and any guarding beyond the factory cab/glass options are added by the OEM integrator to its own design, typically for European demolition and scrap-processing markets.
All 336D L assemblies by section
Every catalogued assembly group for the Caterpillar 336D L. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
239-6407 Air Cleaner & Mounting Gp
| 23***07 | Air Cleaner & Mounting Group | 1 |
| 32***49 | Air Cleaner Group | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
240-3769 Air Cleaner Ar -Precleaner
| 13***80 | Precleaner As; (Air) | 1 |
| 17***15 | Clamp | 1 |
| 24***69 | Air Cleaner Ar; -Precleaner | 1 |
255-2914 Air Cleaner Gp
| 13***26 | Film-Instruction; (Top, Air Cleaner Cover) | 1 |
| 14***39 | Filter Element As-Air; (Primary) | 1 |
| 14***04 | Filter Element As-Air; (Secondary) | 1 |
324-4149 Air Cleaner Gp
| 13***53 | Stud; (M8x1.25x82.75-mm)(M8x1.25x82.75-mm) | 2 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 22***09 | Elbow | 1 |
266-6190 Air Cleaner Gp
| 13***26 | Film-Instruction; (Top, Air Cleaner Cover) | 1 |
| 13***29 | Valve-Dust; (Air Cleaner) | 1 |
| 13***94 | Latch | 3 |
239-6411 Air Cleaner Gp -With Precleaner
| 13***26 | Film-Instruction; (Top, Air Cleaner Cover) | 1 |
| 13***28 | Cover As | 1 |
| 13***29 | Valve-Dust; (Air Cleaner) | 1 |
242-1934 Elbow Gp-Air Inlet
| 14***67 | Clamp; (Hose) | 12 |
| 23***66 | Hose | 1 |
| 23***33 | Hose | 1 |
239-6406 Lines Gp-Air -Air Cleaner To Turbocharger
| 11***15 | Stud-Taperlock; (M10x85-mm Oal) | 12 |
| 16***98 | Manifold-Exhaust | 1 |
| 16***11 | Gasket | 6 |
230-2898 Lines Gp-Air -Aftercooler To Turbocharger
| 23***98 | Lines Group-Cooling Air; -Aftercooler To Turbocharger | 1 |
| 25***66 | Indicator As-Air Filter Change; (Air Restriction) | 1 |
| 26***17 | Hose | 1 |
165-4444 Manifold Gp-Exhaust
| 11***08 | Clip | 1 |
| 13***47 | U-Bolt | 2 |
| 16***44 | Manifold Group-Exhaust | 1 |
266-6312 Muffler Gp
| 13***02 | Clamp As; (Turbine)(Turbine) | 1 |
| 16***63 | Clamp | 2 |
| 23***07 | Cartridge Group-Turbocharger | 1 |
258-8337 Turbocharger Gp
| 22***78 | Seal-Ring; (Fuel And Water Sep Filter) | 1 |
| 25***37 | Turbocharger Group | 1 |
| 32***44 | Filter As-Water Sep & Fuel; (Primary) | 1 |
250-7700 Turbocharger Gp
| 1P***51 | Gasket; (Turbocharger) | 1 |
| 25***00 | Turbocharger Group | 2 |
| 3E***17 | Locknut; (M10x1.5-Thd)(Spiralock) | 4 |
Basic Engine
242-0674 Camshaft Gp
| 10***94 | Plate-Thrust | 1 |
| 1B***05 | Key; (Woodruff) | 1 |
| 22***47 | Gear; (100-Teeth) | 1 |
202-3301 Cover Gp-Cylinder Block -Crankcase
| 20***01 | Cover Group-Cylinder Block; -Crankcase | 1 |
| 21***10 | Gasket | 1 |
| 21***11 | Cover; (Cylinder Block) | 1 |
127-5728 Cover Gp-Flywheel Housing
| 0S***89 | Bolt, Hex. Hd., 5/8"-11 N.C. X 1 3/4" | 3 |
| 12***28 | Cover Group-Flywheel Housing; (Flywheel Housing) | 1 |
| 4D***04 | Washer,Flat Cover Mtg,Accessory Drive | 3 |
211-3285 Cover Gp-Front Housing
| 06***55 | Seal-O-Ring (Id=47.22mm) | 1 |
| 12***57 | Washer; (10.85x19.3x1.27-mm Thk) | 2 |
| 13***22 | Stud | 2 |
118-1727 Cover Gp-Front Housing -Accessory Drive
| 11***27 | Cover Group-Front Housing; -Accessory Drive | 1 |
| 13***19 | Seal-Integral; (Integral) | 1 |
| 4W***26 | Cover | 1 |
235-8174 Cover Gp-Valve Mechanism
| 15***39 | Bearing-Main; (Standard) | 7 |
| 1B***05 | Key; (Woodruff) | 1 |
| 23***74 | Cover Group-Valve Mechanism | 1 |
164-6148 Crankshaft Gp
| 0L***26 | Plug -13mm(.512 In.) Outside Dia. | 2 |
| 16***48 | Crankshaft Group | 1 |
| 17***54 | Bolt-Hex Head; (M16x160mm) | 14 |
325-3915 Cylinder Block As
| 0S***19 | Plug-Cup | 1 |
| 1W***07 | Sleeve | 2 |
| 22***52 | Cylinder Block Group | 1 |
161-3406 Cylinder Block Gp
| 16***06 | Cylinder Block Group | 1 |
| 16***24 | Seal-Liner | 6 |
| 19***62 | Liner-Cylinder Block | 6 |
220-1952 Cylinder Block Gp
| 21***17 | Insert-Valve Seat; (Exhaust)(Standard) | 12 |
| 22***52 | Cylinder Block Group | 1 |
| 22***00 | Sleeve-Injector | 6 |
332-3619 Cylinder Head As
| 18***15 | Gasket Assem. | 1 |
| 25***39 | Cylinder Head Group | 1 |
| 2A***46 | Plug 9.80mm(.386in.)Outside Dia. | 1 |
311-7229 Cylinder Head As
| 21***17 | Insert-Valve Seat; (Exhaust)(Standard) | 12 |
| 22***00 | Sleeve-Injector | 6 |
| 24***88 | Insert-Valve Seat; (Inlet)(Standard) | 12 |
344-2149 Cylinder Head Gp
| 18***15 | Gasket Assem. | 1 |
| 2A***46 | Plug 9.80mm(.386in.)Outside Dia. | 1 |
| 34***49 | Cylinder Head Group | 2 |
345-8414 Cylinder Head Gp
| 15***36 | Pulley-Crankshaft; (8-Groove) | 1 |
| 16***21 | Damper Assem. | 1 |
| 2W***81 | Plate-Clamp; (Pulley Clamp) | 1 |
242-0672 Cylinder Head Gp
| 14***95 | Plug As | 2 |
| 16***78 | Seal-Valve Stem; (Exhaust) | 12 |
| 19***15 | Spring-Valve; (Inner) | 12 |
252-8439 Cylinder Head Gp
| 16***78 | Seal-Valve Stem; (Exhaust) | 12 |
| 19***15 | Spring-Valve; (Inner) | 12 |
| 19***17 | Spring-Valve; (Outer) | 12 |
165-4557 Damper & Pulley Gp
| 16***57 | Damper & Pulley Group | 1 |
| 18***94 | Belt-Serpentine | 1 |
| 18***49 | Support | 1 |
241-7605 Drive Gp-Accessory
| 09***24 | Ring; (Retaining) | 1 |
| 12***25 | Seal-O-Ring; (Id=11.89mm) | 1 |
| 13***46 | Shaft | 1 |
295-9439 Drive Gp-Fan
| 26***15 | Bolt-12 Point Head; (M16x2x180-mm) | 1 |
| 29***84 | Fastener Group-Cylinder Head | 26 |
| 29***39 | Drive Group-Fan | 1 |
213-4363 Fastener Gp-Cylinder Head
| 21***63 | Fastener Group-Cylinder Head | 1 |
| 22***21 | Spacer; (101.5x167x8-mm Thk) | 1 |
| 6V***49 | Bolt; (M10x1.5x50-mm) | 8 |
218-0859 Fastener Gp-Damper & Pulley
| 21***59 | Fastener Group-Damper & Pulley | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 6 |
| 6V***36 | Bolt; (M12x1.75x70-mm) | 6 |
116-4556 Fastener Gp-Front Housing
| 11***56 | Fastener Group-Front Housing; (Housing) | 1 |
| 8T***24 | Washer-To Assemble Valve As And Plates | 11 |
| 8T***12 | Bolt-Plt; (M8 X 1.25 X 50) | 11 |
236-7315 Fastener Gp-Valve Cover
| 23***15 | Fastener Group-Valve Cover | 1 |
| 24***00 | Spring | 9 |
| 8T***00 | Bolt (M8x1.25x60mm); (M8x1.25x60-mm) | 9 |
233-0423 Fastener Gp-Valve Cover Base
| 16***24 | Flywheel As | 1 |
| 23***23 | Fastener Group-Valve Cover Base | 1 |
| 4N***14 | Gear; (113-Teeth)(Flywheel Starter) | 1 |
102-3596 Flywheel Gp
| 10***96 | Flywheel Group | 1 |
| 11***69 | Plate-Thrust | 1 |
| 11***72 | Bearing | 1 |
205-1321 Gear Gp-Front
| 06***55 | Seal-O-Ring (Id=47.22mm) | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 20***21 | Gear Group-Front, Name-Plate (Norwegian) | 1 |
229-3568 Housing Gp-Flywheel
| 1U***46 | Sealant (For Locations A) | 0 |
| 22***68 | Housing Group-Flywheel | 1 |
| 24***59 | Housing-Front | 1 |
245-3260 Housing Gp-Front
| 16***85 | Plate-Lifting; (Rear) | 1 |
| 22***66 | Plate-Lifting; (Front) | 1 |
| 24***60 | Housing Group-Front | 1 |
191-3063 Lifting Gp-Engine
| 10***37 | Washer; (24.5x135x12-mm Thk) | 4 |
| 13***36 | Mount-Flexible | 2 |
| 13***37 | Mount-Flexible | 2 |
239-6474 Mounting Gp-Engine
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 2 |
| 13***03 | Plug As-Connector; (2-Pin) | 1 |
187-0472 Pan Gp-Oil -Engine
| 16***94 | Bearing; (Connecting Rod) | 1 |
| 16***97 | Bolt | 2 |
| 16***99 | Rod Assem. | 1 |
265-1400 Piston & Rod Gp
| 16***94 | Bearing; (Connecting Rod) | 1 |
| 16***97 | Bolt | 2 |
| 16***99 | Rod Assem. | 1 |
347-7908 Piston & Rod Gp
| 14***08 | Plug As. | 1 |
| 18***06 | Plug As; (High Temperature) | 2 |
| 34***08 | Piston & Rod Group | 1 |
169-3105 Plug Gp-Engine
| 16***05 | Plug Group-Engine | 1 |
| 3J***90 | Plug Adapter Turbo Oil Supply; Plug-Adapter Turbo Oil Supply | 1 |
279-7820 Plug Gp-Engine
| 16***47 | Rocker Arm As | 1 |
| 26***24 | Screw-Valve Adjustment; (M10x1.5-Thd) | 1 |
| 27***20 | Plug Group-Engine | 1 |
242-0329 Rocker Arm Gp -Inlet
| 20***19 | Bolt Assem.; (M6x1) | 9 |
| 24***29 | Rocker Arm Group; -Inlet | 1 |
| 24***39 | Seal-Crankshaft; (Front)(Front) | 1 |
213-9320 Rocker Arm Gp -Exhaust
| 21***20 | Rocker Arm Group; -Exhaust | 1 |
| 24***28 | Rocker Arm As | 1 |
| 26***24 | Screw-Valve Adjustment; (M10x1.5-Thd) | 1 |
178-3899 Seal Gp-Crankshaft
| 16***45 | Shaft As-Rocker Arm | 1 |
| 16***59 | Spring | 6 |
| 16***69 | Stand; (End) | 2 |
242-0447 Valve Mechanism Gp
| 03***53 | Seal-O-Ring; (08.92mm Id) | 1 |
| 10***28 | Cover | 1 |
| 10***29 | Name-Plate (Lubrication), Adapter | 1 |
212-8926 Valve Mechanism Gp
| 16***37 | Lifter As-Valve | 12 |
| 21***26 | Valve Mechanism Group | 2 |
| 24***91 | Bridge-Valve | 6 |
Cooling System
188-3826 Cooler Gp-Engine Oil
| 16***32 | Motor As; (Hydraulic Fan) | 1 |
| 16***34 | Resistor As; (Hydraulic Fan) | 1 |
| 16***99 | Nut-Flange; (M5x0.8-Thd) | 1 |
336-1156 Fan & Motor Gp
| 13***82 | Bolt; (M16x2x100-mm) | 2 |
| 14***70 | Adapter | 1 |
| 23***46 | Support As-Fan; (Lh) | 1 |
230-2899 Fan Gp-Suction
| 15***25 | Valve-Fluid Sampling | 1 |
| 15***70 | Cap-Dust; (Engine Coolant) | 1 |
| 19***57 | Gasket; (Water Regulator Housing)(Temperature) | 1 |
348-4301 Housing & Regulator Gp
| 11***11 | Tee-O-Ring Port | 1 |
| 12***27 | Tee | 1 |
| 14***11 | Plug Group | 2 |
248-8835 Housing & Regulator Gp
| 15***25 | Valve-Fluid Sampling | 1 |
| 15***70 | Cap-Dust; (Engine Coolant) | 1 |
| 19***57 | Gasket; (Water Regulator Housing)(Temperature) | 1 |
244-0989 Lines Gp-Turbocharger Water
| 20***34 | Plug-Cup; (73.38-mm Dia) | 2 |
| 24***89 | Lines Group-Turbocharger Water | 1 |
| 8T***61 | Plug; (Pipe) (1-11-1/2 Nptf Thd) | 1 |
205-4013 Plug Gp-Water Lines -Coolant
| 20***13 | Plug Group-Water Lines; -Coolant | 1 |
| 21***52 | Pump Group-Water | 1 |
| 2M***53 | Seal--To Seal Brake Housing To Main Housing | 1 |
202-7674 Pump Gp-Water
| 14***88 | Seal As; (Water Pump) | 1 |
| 17***44 | Cover | 1 |
| 17***52 | Shaft As | 1 |
219-4452 Pump Gp-Water
| 09***35 | Clamp | 1 |
| 14***67 | Clamp; (Hose) | 1 |
| 17***70 | Cap As; (Coolant Overflow) | 1 |
230-2896 Radiator & Hyd Oil Cooler Gp
| 09***35 | Clamp | 1 |
| 14***67 | Clamp; (Hose) | 1 |
| 17***70 | Cap As; (Coolant Overflow) | 1 |
353-5542 Radiator & Hyd Oil Cooler Gp
| 26***53 | Radiator & Hydraulic Oil Cooler Group | 1 |
| 35***42 | Radiator & Hydraulic Oil Cooler Group | 2 |
354-5104 Radiator & Hyd Oil Cooler Gp
| 25***14 | Air Cleaner Group | 1 |
| 35***04 | Radiator & Hydraulic Oil Cooler Group | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
265-3553 Radiator & Hyd Oil Cooler Gp
| 03***65 | Cap As-Radiator; (Sea Water Heat Exchanger) | 1 |
| 09***35 | Clamp | 3 |
| 1P***11 | Sleeve-Bracket To Hydraulic Core As | 3 |
Electrical And Starting System
132-1829 Alarm Gp -Fault
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***29 | Alarm Group; -Overload Warning | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
3e-6328 Alarm Gp -Cab Tilt, Warning
| 26***92 | Nut; (M5x0.8-Thd) | 1 |
| 29***57 | Stop | 1 |
| 29***58 | Lever | 1 |
231-1771 Alarm Gp-Travel -Backup
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 23***71 | Alarm Group-Travel; -Backup | 1 |
177-6972 Alternator Gp-Charging
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***72 | Alternator Group-Charging; (Charging) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
185-5294 Alternator Gp-Charging
| 12***96 | Pulley-Alternator | 1 |
| 18***94 | Alternator Group-Charging; -Waste Handling | 2 |
| 20***99 | Spacer | 1 |
251-0620 Battery & Wiring Gp -Cold Weather
| 18***38 | Collar | 2 |
| 18***39 | Fan As; (Alternator) | 1 |
| 18***42 | Stator Assem. | 1 |
306-8527 Battery & Wiring Gp
| 17***29 | Cable As | 1 |
| 1M***19 | Bolt; (5/16-18x1.375-In)(5/16-18x1.375 In) | 1 |
| 1M***20 | Nut-Battery Terminal (5/16-18 Thd); (5/16-18-Thd)(5/16-18x1.375 In) | 1 |
313-7833 Camera & Mounting Gp -Work Area Visual System, Rear
| 08***87 | Grommet | 1 |
| 09***35 | Spacer; (11x25x20-mm Thk) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 4 |
327-3329 Camera & Mounting Gp -Work Area Visual System, Rear
| 32***92 | Bracket As | 1 |
| 32***29 | Camera & Mounting Group; -Work Area Visual System, Rear | 1 |
| 33***84 | Camera Group; -Work Area Visual System, Rear | 1 |
329-6574 Camera Ar
| 31***33 | Camera & Mounting Group; -Work Area Visual System, Rear | 1 |
| 32***96 | Cover | 1 |
| 32***74 | Camera Ar; -Work Area Visual System, Rear | 1 |
354-2617 Camera Ar -Work Area Visual System, Rear
| 30***87 | Seal/O-Ring, Film Group; -Work Area Visual System, Rear, O Ring Seal, O-Ring | 1 |
| 30***21 | Wiring Group-Camera; -Work Area Visual System | 1 |
| 32***29 | Camera & Mounting Group; -Work Area Visual System, Rear | 1 |
336-6684 Camera Gp -Work Area Visual System, Rear
| 30***87 | Seal/O-Ring, Film Group; -Work Area Visual System, Rear, O Ring Seal, O-Ring | 1 |
| 32***29 | Camera & Mounting Group; -Work Area Visual System, Rear | 1 |
| 33***45 | Wiring Group-Cab; -Rear View, Camera | 1 |
332-2568 Control & Mtg Gp-Communication -Product Link 321sr
| 25***62 | Kit-Bracket; (Camera) | 1 |
| 33***68 | Control & Mtg Group-Communication; -Product Link 321sr | 1 |
253-4522 Control & Mtg Gp-Engine Elek
| 25***22 | Control & Mtg Group-Engine Elek | 1 |
| 26***42 | Bracket As | 1 |
| 26***21 | Electronics Group-Communication; -Product Link 300 | 1 |
283-9267 Control & Mtg Gp-Machine
| 22***74 | Control Group-Unprogrammed | 1 |
| 28***67 | Control & Mtg Group-Machine | 1 |
| 9X***80 | Bolt (45mm Long); (M6x1x45-mm) | 4 |
221-8872 Control & Mtg Gp-Machine
| 10***28 | Spacer-Special; (12.7x26x28.7-mm Thk) | 4 |
| 14***92 | Stud; (M8x1.25-Thd) | 2 |
| 22***72 | Control & Mtg Group-Machine | 1 |
262-1421 Electronics Gp-Communication -Product Link 300
| 22***72 | Control & Mtg Group-Machine | 1 |
| 26***21 | Electronics Group-Communication; -Product Link 300 | 1 |
| 27***74 | Panel & Mtg Group-Circuit Breaker | 1 |
297-4429 Electronics Gp-Machine -High Power
| 29***29 | Electronics Group-Machine; -High Power | 1 |
| 35***05 | Software Group-Communication | 1 |
| 35***64 | Service Group-Communication | 1 |
221-8861 Electronics Gp-Monitor
| 22***61 | Electronics Group-Monitor | 1 |
| 34***65 | Software Group-Machine | 1 |
| 34***66 | Service Group-Machine | 1 |
251-0526 Fastener Gp-Wiring Harness -Straight Travel
| 25***26 | Fastener Group-Wiring Harness; -Straight Travel | 1 |
| 34***08 | Monitor Group-Operator | 1 |
| 34***10 | Software Group-Monitor | 1 |
259-5237 Fastener Gp-Wiring Harness -Heavy Lift
| 11***18 | Clip | 1 |
| 25***37 | Fastener Group-Wiring Harness; -Heavy Lift | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 1 |
259-5295 Fastener Gp-Wiring Harness -Joystick
| 25***95 | Fastener Group-Wiring Harness; -Joystick | 1 |
| 7I***73 | Strap-Cable | 1 |
300-9417 Installation Ar-Communication -Product Link 321sr
| 30***17 | Installation Ar-Communication; -Product Link 321sr | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
320-5931 Installation Gp-Communication
| 23***40 | Film; (Warning) (Product Link, Ansi) (On Lh Front Post Inside Cab) | 1 |
| 23***41 | Film-Warning; (Product Link Radio, Intl) | 1 |
| 23***66 | Base-Mounting | 3 |
227-7581 Installation Gp-Security
| 22***81 | Installation Group-Security | 1 |
| 23***40 | Film; (Warning) (Product Link, Ansi) (On Lh Front Post Inside Cab) | 1 |
| 23***41 | Film-Warning; (Product Link Radio, Intl) | 1 |
153-2523 Lamp Gp-Flood
| 15***23 | Lamp Group-Flood; -Horizontal Rh | 1 |
| 20***62 | Key As-Electronic; (Security) | 2 |
| 21***04 | Module Group-Interface; (Key)(Machine Security System) | 1 |
167-3441 Lamp Gp-Flood
| 16***41 | Lamp Group-Flood; -Cab Guard-Cab | 1 |
| 17***93 | Cover | 1 |
| 17***17 | Lens As; (Floodlight) | 1 |
298-2323 Lighting Gp-Chassis -Front, Rh
| 29***23 | Lighting Group-Chassis; -Front, Rh | 1 |
| 9X***63 | Lamp-Halogen; (24-Volt, 70-Watt)(Floodlight) | 1 |
252-1242 Lighting Gp-Flood -Cab Guard
| 15***23 | Lamp Group-Flood; -Horizontal Rh | 1 |
| 25***42 | Lighting Group-Flood; -Cab Guard | 1 |
| 29***25 | Harness As-Lighting | 1 |
272-3274 Panel & Mtg Gp-Circuit Breaker
| 14***45 | Bolt; (M16x2x20-mm) | 2 |
| 16***41 | Lamp Group-Flood; -Cab Guard-Cab | 2 |
| 19***59 | Support | 2 |
274-5081 Panel Gp-Circuit Breaker
| 27***81 | Panel Group-Circuit Breaker | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
| 8T***37 | Bolt (M10x1.50x20mm) | 4 |
283-9266 Panel Gp-Control
| 06***09 | Screw; (8-32x0.75-In) | 2 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 12***02 | Switch Group-Magnetic; -Starting Motor, Start Relay | 1 |
251-0542 Panel Gp-Switch -Engine Speed, Start
| 13***72 | Bolt As; (M12x1.75x20-mm) | 6 |
| 25***42 | Panel Group-Switch; -Engine Speed, Start | 1 |
| 28***67 | Control & Mtg Group-Machine | 1 |
251-0544 Panel Gp-Switch -Engine Speed, Start
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 4 |
235-8200 Plug Gp-Connector -Engine Harness, Protective Cover
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 4 |
330-6034 Sensor Gp-Engine
| 19***93 | Sensor Group-Pressure; -Atmospheric | 1 |
| 19***94 | Sensor Group-Pressure; -Engine Oil | 1 |
| 21***47 | Sensor Group-Pressure; -Air Inlet Manifold | 1 |
231-1978 Sensor Gp-Engine
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 23***78 | Sensor Group-Engine | 1 |
| 24***53 | Plug As | 1 |
178-2345 Sensor Gp-Liquid Level
| 17***45 | Sensor Group-Liquid Level; -Water Separator-Water In Fuel | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
| 23***12 | Sensor Group-Temperature; -Coolant, Water | 1 |
233-1124 Sensor Gp-Liquid Level -Water In Fuel
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***34 | Probe As-Liquid Level; (Water Separator) | 1 |
224-4536 Sensor Gp-Pressure
| 16***04 | Sensor Group-Pressure; (Turbocharger Outlet) | 1 |
| 22***36 | Sensor Group-Pressure; -Injection Actuation | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
267-1402 Sensor Gp-Pressure
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
| 26***02 | Sensor Group-Pressure; -Injection Actuation | 1 |
| 27***93 | Sensor Group-Pressure; (Water Jacket Outlet) | 1 |
239-2396 Sensor Gp-Pressure
| 21***67 | Seal-O-Ring | 1 |
| 22***36 | Sensor Group-Pressure; -Injection Actuation | 1 |
| 23***96 | Sensor Group-Pressure; -Engine Oil, Fuel | 1 |
266-8650 Sensor Gp-Pressure
| 19***25 | Sensor Group-Pressure; -Engine Oil | 1 |
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
| 26***50 | Sensor Group-Pressure; -Intake Manifold Air | 1 |
194-6725 Sensor Gp-Pressure
| 09***61 | Strap; (Cable) | 2 |
| 17***45 | Sensor Group-Liquid Level; -Water Separator-Water In Fuel | 1 |
| 19***25 | Sensor Group-Pressure; -Engine Oil | 1 |
236-6220 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***76 | Wedge-Plug Lock; (3-Pin) | 1 |
| 19***26 | Harness As-Sensor; (16-18 Ga Wire)(Engine Oil Temperature) | 1 |
197-8394 Sensor Gp-Pressure
| 16***03 | Sensor Group-Pressure; (Turbocharger Inlet, Rh) | 1 |
| 19***94 | Sensor Group-Pressure; -Engine Oil | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 1 |
210-1747 Sensor Gp-Pressure
| 16***05 | Sensor As-Pressure; (Unfiltered Engine Oil) | 1 |
| 21***47 | Sensor Group-Pressure; -Air Inlet Manifold | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
197-8393 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
| 19***93 | Sensor Group-Pressure; -Atmospheric | 1 |
276-9067 Sensor Gp-Pressure
| 21***67 | Seal-O-Ring | 1 |
| 24***69 | Sensor Group-Pressure | 1 |
| 27***67 | Sensor Group-Pressure; -Engine Oil, Fuel | 1 |
303-3357 Sensor Gp-Pressure
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
| 23***27 | Plug As-Connector; (3-Pin) | 1 |
| 27***19 | Sensor Group-Pressure; (Engine Block Oil Inlet) | 1 |
242-9982 Sensor Gp-Speed
| 24***82 | Sensor Group-Speed; -Engine Timing | 1 |
| 24***30 | Sensor Group-Speed; -Engine Timing | 1 |
| 3P***47 | Seal-O-Ring (Id=13.94mm); (13.949mm Id) | 2 |
236-6221 Sensor Gp-Speed -Engine Timing
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 17***49 | Strap; (Marker) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
4p-5820 Sensor Gp-Speed
| 29***60 | Sensor Group-Pressure | 1 |
| 4P***20 | Sensor Group-Speed; (Eng Speed Pick-Up) | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 1 |
234-5012 Sensor Gp-Temperature
| 13***45 | Pad; (Connector) | 0 |
| 23***12 | Sensor Group-Temperature; -Coolant, Water | 1 |
| 23***80 | Seal-O-Ring | 1 |
274-7395 Sensor Gp-Temperature
| 23***80 | Seal-O-Ring | 1 |
| 25***53 | Sensor As-Temperature; (Torque Converter Outlet Oil) | 1 |
| 27***95 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
234-5013 Sensor Gp-Temperature
| 23***13 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
| 25***53 | Sensor As-Temperature; (Torque Converter Outlet Oil) | 1 |
| 6V***09 | Seal-O-Ring (Id=16.36mm); (16.36-mm Id) | 1 |
197-8391 Sensor Gp-Temperature
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***28 | Plug As | 1 |
| 19***91 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
274-7396 Sensor Gp-Temperature
| 13***45 | Pad; (Connector) | 1 |
| 26***97 | Sensor Group-Temperature; (Air Inlet Manifold) | 1 |
| 27***96 | Sensor Group-Temperature; -Engine Coolant | 1 |
238-3215 Starting Aid Gp -Air Inlet Heater
| 13***45 | Pad; (Connector) | 1 |
| 23***15 | Starting Aid Group; -Air Inlet Manifold | 1 |
| 26***97 | Sensor Group-Temperature; (Air Inlet Manifold) | 1 |
239-6677 Starting Aid Gp-Ether
| 1U***46 | Sealant (For Locations A) | 0 |
| 23***16 | Heater As; (Starting Aid) | 1 |
| 23***77 | Starting Aid Group-Ether | 1 |
314-3587 Starting Ar-Cold Weather
| 1B***81 | Clip (2"Long) | 4 |
| 23***45 | Nut-Sleeve; (5/16-24-Thd) | 1 |
| 23***34 | Valve Group-Ether Starting | 1 |
197-0986 Starting Motor Gp-Electric
| 19***86 | Starting Motor Group-Electric; (Electric) | 1 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 1 |
| 1S***52 | Terminal-Cable; (00-Ga, 3/8-In Screw) | 1 |
207-1556 Starting Motor Gp-Electric
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 1 |
| 1S***52 | Terminal-Cable; (00-Ga, 3/8-In Screw) | 1 |
| 20***56 | Starting Motor Group-Electric; (24-Volt) | 2 |
237-1962 Starting Motor Gp-Electric
| 0S***97 | Capscrew (1/4 - 28 Nf X 1 Gd8, Hex) | 5 |
| 23***62 | Starting Motor Group-Electric | 1 |
| 25***79 | Kit-Solenoid; (24-Volt)(Starting Motor) | 1 |
180-2435 Starting Motor Gp-Electric
| 18***35 | Starting Motor Group-Electric; -Cold Weather | 1 |
| 23***77 | Starting Aid Group-Ether | 1 |
| 25***20 | Battery & Wiring Group; -Cold Weather | 1 |
338-3454 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
| 0S***97 | Capscrew (1/4 - 28 Nf X 1 Gd8, Hex) | 13 |
7n-0719 Switch Gp-Disconnect -Battery
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
| 0S***97 | Capscrew (1/4 - 28 Nf X 1 Gd8, Hex) | 13 |
| 12***35 | Cover; (Starting Motor) | 1 |
125-1302 Switch Gp-Magnetic -Start Relay
| 12***02 | Switch Group-Magnetic; -Starting Motor, Start Relay | 1 |
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
209-5582 Switch Gp-Magnetic -Starting Aid Heater Relay
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
234-6613 Switch Gp-Position -Hydraulic Lockout
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 23***13 | Switch Group-Position; -Hydraulic Lockout | 1 |
| 3F***56 | Lockwasher; (8.43x15.5x0.76mm Thk) | 2 |
258-0883 Switch Gp-Pressure -Fuel
| 08***83 | Washer; (0.8mm Thk) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***99 | Switch As; (Hydraulic Lockout, Neutral Start) | 1 |
238-1594 Switch Gp-Push Button -Refueling Pump, Start
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 23***94 | Switch Group-Push Button; -Refueling Pump, Start | 1 |
| 6V***89 | Seal-O-Ring (Id=19.18mm) | 1 |
238-1596 Switch Gp-Push Button -Refueling Pump, Stop
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 1S***12 | Screw-Tapping | 2 |
319-4420 Switch Gp-Rotary -Throttle Position
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 1S***12 | Screw-Tapping | 2 |
| 23***11 | Plug As-Connector; (2-Pin) | 1 |
9g-7641 Switch Gp-Start -Engine, Key
| 10***10 | Seal | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 5 |
| 24***08 | Receptacle As-Connector; (6-Pin) | 1 |
239-1134 Valve Gp-Ether Starting
| 23***34 | Valve Group-Ether Starting | 1 |
| 5P***00 | Key Total 2 Pieces Per Unit; (Literature Compartment) | 1 |
| 6V***62 | Screw-Machine; (8-32x0.31-In) | 4 |
355-8753 Warning Gp-Stability -Tilt Cab
| 14***50 | Relay; (24-Volt)(Hydraulic Lock, Quick Cplr, Supply) | 2 |
| 30***06 | Harness As-Alarm, Accessory Drive Support | 1 |
| 30***28 | Harness As-Monitor; (Machine Stability) | 1 |
359-3473 Warning Gp-Stability -Tilt Cab
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***18 | Clip | 2 |
261-5155 Warning Gp-Stability -Cab
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 26***55 | Warning Group-Stability; -Cab | 1 |
| 35***89 | Filter; (Ether Start) | 1 |
251-0623 Wiring Gp-Auxiliary Control -Combined Function, Medium Pressure
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 14***50 | Relay; (24-Volt)(Hydraulic Lock, Quick Cplr, Supply) | 1 |
| 14***51 | Connector-Receptacle | 2 |
328-0370 Wiring Gp-Auxiliary Control -Work Tool, 4-Function, Flow Control
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 8 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***36 | Clip | 2 |
251-0619 Wiring Gp-Boom Float
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 8 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
| 11***36 | Clip | 2 |
251-0432 Wiring Gp-Cab
| 11***36 | Clip | 1 |
| 11***18 | Clip | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
333-1345 Wiring Gp-Cab -Rear View, Camera
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 4 |
| 12***68 | Socket-Connector; (14-Ga) | 3 |
333-1346 Wiring Gp-Cab -Tilt
| 30***90 | Harness As-Wiring; (Work Area Visual System, Rear) | 1 |
| 32***98 | Harness As-Auxiliary; (Work Area Visual System, Rear) | 1 |
| 33***46 | Wiring Group-Cab; -Tilt | 1 |
267-7642 Wiring Gp-Cab -Coupler
| 09***42 | Screw; (Machine) (M6x1.0x16mm) | 2 |
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 3 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 3 |
328-0048 Wiring Gp-Cab -Rear View Display
| 10***65 | Terminal; (Female) | 3 |
| 10***75 | Switch As-Toggle; (Hydraulic Attachment Control) | 1 |
| 12***73 | Terminal; (Male) | 3 |
328-0093 Wiring Gp-Cab -Boom Float
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 30***90 | Harness As-Wiring; (Work Area Visual System, Rear) | 1 |
| 32***98 | Harness As-Auxiliary; (Work Area Visual System, Rear) | 1 |
283-8360 Wiring Gp-Cab Tilt
| 26***23 | Cable As-Coaxial; (3-M) | 1 |
| 28***60 | Wiring Group-Cab Tilt | 1 |
| 7K***81 | Strap-Pressure & Return Hoses To | 6 |
295-6630 Wiring Gp-Cab Tilt
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***18 | Clip | 1 |
| 13***00 | Clip; (Tab) | 2 |
338-5966 Wiring Gp-Camera -Work Area Visual System, Rear
| 13***89 | Clip; (Ladder) | 3 |
| 26***43 | Cable As | 1 |
| 33***66 | Wiring Group-Camera; -Work Area Visual System, Rear | 1 |
306-8721 Wiring Gp-Camera -Rear Vision Camera
| 16***20 | Switch As-Rocker; (Cab Tilt) | 1 |
| 16***42 | Connector; (Receptacle) | 1 |
| 16***43 | Terminal; (Male) | 5 |
267-7803 Wiring Gp-Communication -Product Link 321sr
| 26***03 | Wiring Group-Communication; -Product Link 321sr | 1 |
| 26***43 | Cable As | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 27 |
231-1836 Wiring Gp-Console -Lh
| 11***37 | Clip | 1 |
| 11***18 | Clip | 3 |
| 13***89 | Clip; (Ladder) | 2 |
251-0433 Wiring Gp-Console
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 12***68 | Socket-Connector; (14-Ga) | 11 |
251-0435 Wiring Gp-Console -Rh
| 23***36 | Wiring Group-Console; -Lh | 1 |
| 25***35 | Wiring Group-Console; -Rh | 2 |
236-6226 Wiring Gp-Electronic Control
| 10***64 | Connector-Plug | 1 |
| 10***65 | Terminal; (Female) | 14 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
330-6018 Wiring Gp-Electronic Control
| 10***20 | Plug As-Connector; (2-Pin) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
238-1580 Wiring Gp-Fan -Reversing
| 10***20 | Plug As-Connector; (2-Pin) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***97 | Mount-Wire Tie | 5 |
238-1568 Wiring Gp-Fine Swing
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 23***68 | Wiring Group-Fine Swing | 1 |
| 23***01 | Harness As-Control | 1 |
269-3410 Wiring Gp-Heater -Air Inlet Manifold
| 11***36 | Clip | 4 |
| 11***37 | Clip | 3 |
| 23***71 | Bracket As | 1 |
259-4964 Wiring Gp-Medium Pressure
| 17***13 | Ring-Terminal | 1 |
| 20***77 | Bolt-Flange Head; (M8x1x25-mm) | 2 |
| 20***82 | Switch Group-Magnetic; -Starting Aid Heater Relay-Air Inlet Heater Relay | 1 |
283-8365 Wiring Gp-Platform -Ultra-High Demolition
| 10***86 | Sleeve | 1 |
| 13***89 | Clip; (Ladder) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
267-7748 Wiring Gp-Quick Coupler
| 11***38 | Clip | 4 |
| 11***39 | Strap | 4 |
| 11***18 | Clip | 12 |
238-1570 Wiring Gp-Refueling Pump
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
Engine Arrangement
224-9843 Engine Ar
| 10***96 | Flywheel Group | 1 |
| 11***56 | Fastener Group-Front Housing; (Housing) | 1 |
| 11***27 | Cover Group-Front Housing; -Accessory Drive | 1 |
266-6311 Engine Ar
| 22***43 | Engine Ar | 1 |
| 26***11 | Engine Ar | 1 |
| 26***12 | Muffler Group | 1 |
348-2747 Engine Ar-Core
| 16***06 | Cylinder Block Group | 1 |
| 16***48 | Crankshaft Group | 1 |
| 18***26 | Cooler Group-Engine Oil | 1 |
229-2665 Engine Ar-Core
| 16***06 | Cylinder Block Group | 1 |
| 16***48 | Crankshaft Group | 1 |
| 18***26 | Cooler Group-Engine Oil | 1 |
279-7825 Installation Ar-Engine
| 23***96 | Radiator & Hydraulic Oil Cooler Group | 1 |
| 23***98 | Lines Group-Cooling Air; -Aftercooler To Turbocharger | 1 |
| 23***99 | Fan Group-Suction | 1 |
Frame And Body
275-9192 Counterweight & Mounting Gp
| 24***37 | Spacer; (39x75x20-mm Thk) | 4 |
| 27***92 | Counterweight & Mounting Group | 1 |
| 33***31 | Counterweight Group | 1 |
334-0331 Counterweight Gp
| 08***44 | Spacer; (13.3x21.3x25-mm Thk) | 4 |
| 12***99 | Liner | 1 |
| 18***22 | Liner | 1 |
330-1423 Cover As-Sound Suppression -Fuel, Hydraulic Tanks
| 17***15 | Bumper | 1 |
| 17***39 | Liner | 1 |
| 20***27 | Liner | 1 |
259-3667 Cover As-Sound Suppression -Precleaner
| 25***67 | Cover As-Sound Suppression; -Precleaner | 1 |
| 26***71 | Insulation | 1 |
| 26***72 | Insulation | 1 |
273-7903 Cover As-Sound Suppression
| 26***78 | Insulation | 1 |
| 27***02 | Liner | 3 |
| 27***03 | Cover As-Sound Suppression | 1 |
259-3552 Cover As-Sound Suppression
| 25***52 | Cover As-Sound Suppression | 1 |
| 25***57 | Liner | 1 |
| 26***07 | Insulation | 1 |
262-2570 Cover As-Sound Suppression -Air Cleaner
| 25***75 | Cover As | 1 |
| 26***70 | Cover As-Sound Suppression; -Air Cleaner | 1 |
| 26***71 | Insulation | 1 |
272-5821 Cover Gp-Access -Front, Rh
| 19***51 | Bumper | 2 |
| 25***10 | Bracket As | 1 |
| 25***11 | Bracket As | 1 |
330-1412 Cover Gp-Access -Radiator
| 1K***50 | Spring | 1 |
| 26***76 | Liner | 1 |
| 26***35 | Sheet-Rubber | 1 |
298-3225 Door As-Access -Air Cleaner
| 16***76 | Hinge | 2 |
| 20***89 | Cushion | 1 |
| 24***39 | Insulation | 1 |
289-6893 Door Gp-Access -Radiator
| 09***18 | Nut (M6x1.0 Thd) | 4 |
| 12***01 | Rubber | 1 |
| 16***76 | Hinge | 2 |
289-6897 Door Gp-Access -Pump Compartment
| 09***18 | Nut (M6x1.0 Thd) | 4 |
| 16***76 | Hinge | 2 |
| 18***62 | Cover | 1 |
270-9465 Enclosure Gp-Generator
| 10***08 | Bumper; (Conical) | 2 |
| 12***96 | Seal; (1.084m) | 0 |
| 13***75 | Bolt As-Locking; (M12x1.75x30-mm)(M12x1.75x30-mm)) | 4 |
330-1169 Fender & Cover Gp
| 27***18 | Liner | 1 |
| 33***69 | Fender & Cover Group | 1 |
| 33***70 | Cover As | 1 |
280-3511 Fender & Cover Gp
| 23***02 | Spacer; (15x35x11-mm Thk) | 2 |
| 23***03 | Washer; (25x35x4-mm Thk) | 2 |
| 28***11 | Fender & Cover Group | 1 |
272-9550 Frame Gp-Upper
| 09***90 | Shim (1.0 mm Thick) | 4 |
| 09***64 | Spacer; (103x140x12-mm Thk) | 2 |
| 09***67 | Washer; (22x60x8-mm Thk) | 2 |
353-0489 Gear & Bearing Gp-Swing
| 14***85 | Seal (1100 cm) (Order By The Centimeter) | 0 |
| 22***74 | Seal-Dust | 1 |
| 35***89 | Gear & Bearing Group-Swing | 1 |
267-6756 Gear & Bearing Gp-Swing
| 09***20 | Spacer; (25x44x6-mm Thk) | 46 |
| 11***31 | Bolt-Hex Head; (M24x3x120mm) | 52 |
| 14***73 | Bolt; (M24x3x150-mm) | 31 |
259-3996 Guard Gp-Bottom -Cab Riser
| 13***74 | Bolt As; (M12x1.75x25-mm) | 12 |
| 23***60 | Plate | 1 |
| 25***96 | Guard Group-Bottom; -Cab Riser | 1 |
278-4112 Guard Gp-Bottom
| 09***57 | Hinge As | 1 |
| 10***66 | Bolt; (Self Locking) (M16x2x40mm) | 20 |
| 19***62 | Plate As | 1 |
134-8887 Guard Gp-Swivel
| 13***87 | Guard Group-Swivel; (Swivel) | 1 |
| 13***88 | Plate As | 1 |
| 13***91 | Plate As | 1 |
270-9153 Handrail Gp -Front, Rh
| 17***79 | Clamp | 1 |
| 27***51 | Handrail As | 1 |
| 27***52 | Handrail As | 1 |
272-7007 Handrail Gp -Cab Riser
| 13***74 | Bolt As; (M12x1.75x25-mm) | 4 |
| 27***07 | Handrail Group; -Cab Riser | 1 |
| 27***99 | Handrail | 1 |
295-5882 Hood & Guard Gp
| 08***08 | Shim (1.0mm Thick) | 2 |
| 08***09 | Shim (2.0mm Thick) | 2 |
| 09***84 | Locknut; (M12x1.75-Thd) | 2 |
237-8802 Hood Gp -Precleaner
| 23***02 | Hood Group; -Precleaner | 1 |
| 25***62 | Support As | 1 |
| 25***67 | Cover As-Sound Suppression; -Precleaner | 1 |
289-6754 Hood Gp-Engine
| 09***29 | Cushion | 2 |
| 10***48 | Seal; (0.5-M Each) | 0 |
| 11***89 | Hinge | 2 |
293-3877 Lines Gp-Grease -Tilt Cylinder
| 03***48 | Clip; (11.11mm .437in Id) | 2 |
| 08***40 | Plate | 1 |
| 10***09 | Connector As | 2 |
256-1853 Sheet As-Sound Suppression
| 25***53 | Sheet As-Sound Suppression | 1 |
| 25***58 | Liner | 1 |
| 25***59 | Insulation | 1 |
262-2550 Sheet As-Sound Suppression
| 10***48 | Seal; (0.5-M Each) | 0 |
| 25***24 | Liner | 1 |
| 26***50 | Sheet As-Sound Suppression | 1 |
256-1826 Sheet As-Sound Suppression
| 25***26 | Sheet As-Sound Suppression | 1 |
| 25***28 | Liner | 1 |
| 25***29 | Liner | 1 |
336-4509 Sheet As-Sound Suppression
| 10***48 | Seal; (0.5-M Each) | 0 |
| 25***97 | Sheet-Rubber | 1 |
| 25***99 | Insulation | 1 |
289-7271 Sheet As-Sound Suppression
| 28***71 | Sheet As-Sound Suppression | 1 |
| 28***73 | Liner | 1 |
| 28***74 | Liner | 1 |
262-2553 Sheet As-Sound Suppression
| 25***46 | Liner | 1 |
| 25***47 | Insulation | 1 |
| 25***48 | Liner | 1 |
256-1912 Sheet As-Sound Suppression
| 25***12 | Sheet As-Sound Suppression | 1 |
| 25***13 | Sheet As | 1 |
| 25***15 | Liner | 1 |
262-2543 Sheet As-Sound Suppression
| 26***37 | Liner | 1 |
| 26***38 | Liner | 1 |
| 26***39 | Liner | 1 |
307-7936 Sheet As-Sound Suppression
| 25***10 | Sheet-Rubber | 1 |
| 25***11 | Insulation | 1 |
| 25***14 | Insulation | 1 |
256-1890 Sheet As-Sound Suppression
| 25***90 | Sheet As-Sound Suppression | 1 |
| 25***92 | Liner | 1 |
| 25***93 | Liner | 1 |
256-1919 Sheet As-Sound Suppression
| 25***19 | Sheet As-Sound Suppression | 1 |
| 25***22 | Insulation | 1 |
| 25***23 | Liner | 1 |
270-9635 Sheet As-Sound Suppression
| 10***48 | Seal; (0.5-M Each) | 0 |
| 25***97 | Sheet-Rubber | 1 |
| 25***99 | Insulation | 1 |
256-1802 Sheet As-Sound Suppression
| 25***02 | Sheet As-Sound Suppression | 1 |
| 25***05 | Insulation | 1 |
| 25***06 | Insulation | 1 |
270-9648 Sheet As-Sound Suppression
| 10***48 | Seal; (0.5-M Each) | 0 |
| 25***18 | Liner | 1 |
| 27***48 | Sheet As-Sound Suppression | 1 |
336-4514 Sheet As-Sound Suppression
| 10***48 | Seal; (0.5-M Each) | 0 |
| 27***49 | Liner | 1 |
| 33***01 | Liner | 1 |
272-7008 Step Gp -Cab Riser
| 13***74 | Bolt As; (M12x1.75x25-mm) | 4 |
| 27***08 | Step Group; -Cab Riser | 1 |
| 27***68 | Step As | 1 |
330-1444 Support As-Enclosure
| 25***09 | Liner | 1 |
| 26***59 | Insulation | 1 |
| 33***44 | Support As-Enclosure; -Air Cleaner | 1 |
262-2555 Support As-Enclosure
| 26***55 | Support As-Enclosure | 1 |
| 26***56 | Insulation | 1 |
| 26***57 | Insulation | 1 |
330-1408 Support As-Enclosure
| 10***48 | Seal; (0.5-M Each) | 1 |
| 25***09 | Liner | 1 |
| 25***10 | Liner | 1 |
Fuel System
174-9570 Filter Gp-Water Sep & Fuel
| 10***07 | Seal-O-Ring; (Fuel System) | 1 |
| 14***03 | Seal-O-Ring; (Fuel System) | 2 |
| 14***40 | Ring-Backup; (37.36mm Od), Flasher Switch; Hazard, Replaces 421164a1, Flasher Switch | 1 |
328-2574 Injector Gp-Fuel
| 00***62 | Elbow (To Primary Filter Base) | 1 |
| 03***88 | Connector-Tube Assembly To Main Relief | 1 |
| 11***08 | Clip | 1 |
231-3039 Lines Gp-Fuel
| 00***64 | End; (Hose) | 2 |
| 09***86 | Clamp; (Hose) | 4 |
| 13***52 | Connector | 1 |
237-8752 Lines Gp-Fuel
| 11***28 | Seal | 1 |
| 12***38 | Housing; (Receptacle) | 1 |
| 12***39 | Terminal; (Male) | 2 |
229-1859 Pump & Motor Gp-Refueling
| 22***59 | Pump & Motor Group-Refueling | 1 |
| 23***70 | Wiring Group-Refueling Pump; -Refueling | 1 |
| 29***58 | Film Group; -Fuel Transfer Pump | 1 |
356-2350 Pump Ar-Refueling
| 23***51 | Bolt-Socket Head; (M8x1.25x65-mm) | 2 |
| 32***74 | Injector Group-Fuel | 1 |
| 35***50 | Pump Ar-Refueling | 1 |
267-3362 Pump Gp-Fuel Injection
| 18***23 | Pump As-Fuel Priming | 1 |
| 26***62 | Pump Group-Fuel Injection | 1 |
| 7X***01 | Bolt-Plt; (1/4unc X 1 1/4) | 1 |
267-3361 Pump Gp-Fuel Injection
| 26***61 | Pump Group-Fuel Injection | 7 |
165-9154 Pump Gp-Fuel Priming
| 12***14 | Film-Instruction; (Refueling Pump) | 1 |
| 12***29 | Clip | 1 |
| 13***72 | Bolt As; (M12x1.75x20-mm) | 2 |
357-0082 Pump Gp-Refueling
| 03***50 | Elbow (Check Valve Drain Tube) | 1 |
| 15***06 | Seal-O-Ring; (11.89mm Id) | 1 |
| 18***99 | Connector As | 2 |
319-0677 Pump Gp-Unit Injector Hyd
| 19***38 | Elbow Assem. | 0 |
| 23***43 | Regulator Group-Fuel Pressure | 1 |
| 29***03 | Elbow As | 1 |
258-8745 Pump Gp-Unit Injector Hyd
| 03***50 | Elbow (Check Valve Drain Tube) | 1 |
| 06***74 | Elbow | 1 |
| 18***99 | Connector As | 2 |
312-0677 Pump Gp-Unit Injector Hyd
| 15***36 | Cartridge | 1 |
| 17***28 | Seal-O-Ring; (Fuel Transfer Pump) | 1 |
| 1F***60 | Washer Roll-Over Group To Deck | 1 |
232-0343 Regulator Gp-Fuel Pressure
| 08***10 | Spacer; (16.6x32x26-mm Thk) | 4 |
| 13***72 | Bolt As; (M12x1.75x20-mm) | 2 |
| 23***43 | Regulator Group-Fuel Pressure | 1 |
205-1306 Regulator Gp-Fuel Pressure
| 20***06 | Name-Plate (Portuguese), Regulator Group-Fuel Pressure | 1 |
| 29***20 | Regulator As; (Fuel Pressure) | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 1 |
237-8783 Tank & Mtg Gp-Fuel
| 08***10 | Spacer; (16.6x32x26-mm Thk) | 4 |
| 13***72 | Bolt As; (M12x1.75x20-mm) | 2 |
| 23***83 | Tank & Mtg Group-Fuel | 1 |
327-3333 Tank Gp-Fuel
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 5 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***11 | Valve As; (Fuel Shutoff) | 1 |
351-3020 Tank Gp-Fuel
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 5 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***11 | Valve As; (Fuel Shutoff) | 1 |
139-6873 Valve Gp-Fuel Bypass -Filter
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 5 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***11 | Valve As; (Fuel Shutoff) | 1 |
298-3147 Valve Gp-Fuel Shutoff
| 29***47 | Valve Group-Fuel Shutoff | 1 |
| 9X***37 | Seal-O-Ring | 1 |
Hydraulic System
164-6981 Accumulator Gp-Hydraulic -Charged
| 08***56 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 16***81 | Accumulator Group-Hydraulic; -Charged | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
087-4456 Accumulator Gp-Hydraulic -Charged
| 08***56 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 14***06 | Accumulator Group-Hydraulic; -Charged | 1 |
| 4I***36 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
4i-1536 Accumulator Gp-Hydraulic -Charged
| 4I***36 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 4I***39 | Core | 1 |
| 4I***62 | Cap | 1 |
087-4454 Accumulator Gp-Hydraulic -Charged
| 08***54 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 08***75 | Core | 1 |
| 08***76 | Cap | 1 |
145-5106 Accumulator Gp-Hydraulic -Charged
| 14***06 | Accumulator Group-Hydraulic; -Charged | 1 |
| 15***00 | Film-Warning; (High Pressure Cylinder) | 1 |
5i-8416 Accumulator Gp-Hydraulic -Charged
| 08***54 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 2 |
| 4I***67 | Cap | 1 |
| 5I***16 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
180-9419 Accumulator Gp-Hydraulic -Uncharged
| 15***00 | Film-Warning; (High Pressure Cylinder) | 1 |
| 16***79 | Cap; (Accumulator) | 1 |
| 16***80 | Core | 1 |
227-8807 Accumulator Gp-Hydraulic -Uncharged
| 22***07 | Accumulator Group-Hydraulic; -Uncharged | 1 |
199-7447 Accumulator Gp-Hydraulic -Uncharged
| 19***47 | Accumulator Group-Hydraulic; -Uncharged-Pilot Oil | 1 |
| 4I***39 | Core | 1 |
| 4I***62 | Cap | 1 |
209-5982 Actuator Gp
| 15***39 | Piston | 1 |
| 15***41 | Piston | 1 |
| 15***42 | Guide | 1 |
173-3503 Base Gp-Oil Filter -Hydraulic
| 13***26 | Bolt; (Shoulder) (M6x1x28.75mm) | 1 |
| 13***28 | Shim; (0.1-mm Thk) | 1 |
| 13***31 | Packing | 1 |
270-5687 Control Ar-Auxiliary -Joystick, 2-Bn, Slide, Trig Sw
| 24***10 | Film Group; -Operator Controls, Notice | 1 |
| 25***95 | Fastener Group-Wiring Harness; -Joystick | 1 |
| 27***87 | Control Ar-Auxiliary; -Joystick, 2-Bn, Slide, Trig Sw | 1 |
336-3339 Control Ar-Auxiliary -System 18, Combined Function
| 28***43 | Valve & Mtg Group-Main Control | 1 |
| 32***70 | Wiring Group-Auxiliary Control; -Work Tool, 4-Function, Flow Control | 1 |
| 33***89 | Lines Group-Front; -System 18, Combined Function | 1 |
297-0494 Control Ar-Auxiliary -System 17, Combined Fn, Med Pr
| 25***23 | Wiring Group-Auxiliary Control; -Combined Function, Medium Pressure | 1 |
| 25***24 | Lines Group-Front; -System 17, Combined Fn, Med Pr | 1 |
| 26***57 | Lines Group-Pilot; -Comb Fctn, Joystk W/Slide Ctl | 1 |
356-2347 Control Ar-Auxiliary -System 18, Combined Function
| 32***70 | Wiring Group-Auxiliary Control; -Work Tool, 4-Function, Flow Control | 1 |
| 33***90 | Lines Group-Pilot; -Work Tool, 4-Function, Flow Control | 1 |
| 35***47 | Control Ar-Auxiliary; -System 18, Combined Function | 1 |
255-5822 Control Ar-Auxiliary -Medium Pressure
| 23***20 | Drive Group-Auxiliary Pump; -Accessory Drive | 1 |
| 25***26 | Lines Group-Front; -Medium Pressure Circuit | 1 |
| 25***22 | Control Ar-Auxiliary; -Combined Fctn, Medium Pressure | 1 |
356-2346 Control Ar-Auxiliary -Medium Pressure
| 23***20 | Drive Group-Auxiliary Pump; -Accessory Drive | 1 |
| 25***82 | Pump & Mtg Group-Auxiliary | 1 |
| 25***64 | Wiring Group-Medium Pressure | 1 |
356-2345 Control Ar-Boom
| 23***32 | Lines Group-Boom Cylinder; -Boom Lowering Control | 1 |
| 24***80 | Lines Group-Sensor; -Overload Warning Device | 1 |
| 25***19 | Wiring Group-Boom Float | 1 |
329-6564 Control Ar-Boom -Boom Float, Overload Warning
| 23***32 | Lines Group-Boom Cylinder; -Boom Lowering Control | 1 |
| 24***80 | Lines Group-Sensor; -Overload Warning Device | 1 |
| 25***19 | Wiring Group-Boom Float | 1 |
356-2348 Control Ar-Coupler
| 26***42 | Wiring Group-Cab; -Quick Coupler | 1 |
| 26***48 | Wiring Group-Quick Coupler | 1 |
| 26***16 | Film Group; -Quick Coupler | 1 |
268-6821 Control Ar-Coupler
| 26***42 | Wiring Group-Cab; -Quick Coupler | 1 |
| 26***48 | Wiring Group-Quick Coupler | 1 |
| 26***16 | Film Group; -Quick Coupler | 1 |
264-8479 Control Ar-Fan -Reversing
| 23***80 | Wiring Group-Fan; -Reversing | 1 |
| 24***34 | Motor & Mtg Group-Hydraulic Fan; -Reversing | 1 |
| 25***79 | Lines Group-Motor; -Reversing Fan | 1 |
287-0169 Coupling Gp-Flexible
| 09***10 | Bolt-Socket Head | 4 |
| 09***11 | Pin; (Spring) | 8 |
| 09***12 | Setscrew-Socket; (M20x2.5x25-mm) | 2 |
324-4230 Coupling Gp-Flexible
| 09***10 | Bolt-Socket Head | 4 |
| 09***11 | Pin; (Spring) | 9 |
| 09***12 | Setscrew-Socket; (M20x2.5x25-mm) | 2 |
272-4669 Coupling Gp-Pump
| 09***11 | Pin; (Spring) | 4 |
| 16***64 | Bolt-Socket Head; (M20x2.5x55-mm) | 4 |
| 27***50 | Plate | 1 |
277-0741 Cylinder & Seal Gp-Boom
| 27***88 | Cylinder Group-Boom | 1 |
| 27***41 | Cylinder & Seal Group-Boom | 1 |
| 9X***97 | Seal; (Od=116.15mm) | 2 |
352-3377 Cylinder Ar-Boom
| 27***41 | Cylinder & Seal Group-Boom | 2 |
| 29***25 | Lines Group-Boom Cylinder; -Load Control Valve | 1 |
| 35***77 | Cylinder Ar-Boom | 1 |
270-7888 Cylinder Gp-Boom
| 08***51 | Head | 1 |
| 09***35 | Seal-O-Ring (Id=149.60mm) | 1 |
| 11***62 | Bearing-Sleeve | 1 |
259-4000 Cylinder Gp-Cab Tilt
| 20***36 | Bearing | 4 |
| 21***71 | Kit-Seal; (Cab Tilt Cylinder) | 1 |
| 25***00 | Cylinder Group-Cab Tilt | 1 |
123-4121 Cylinder Gp-Undercarriage -Adjustable Gauge
| 10***92 | Rod Assem. | 1 |
| 11***01 | Washer-Hard; (31x57x6-mm Thk) | 1 |
| 12***21 | Cylinder Group-Undercarriage; -Adjustable Gauge | 1 |
234-4620 Drive Gp-Auxiliary Pump -Accessory Drive
| 10***81 | Bolt; (Socket Head) (M12x1.75x35mm) | 8 |
| 23***20 | Drive Group-Auxiliary Pump; -Accessory Drive | 1 |
| 29***41 | Drive Group-Auxiliary Pump; -Accessory Drive | 1 |
295-9441 Drive Gp-Auxiliary Pump -Accessory Drive
| 17***64 | Bearing | 1 |
| 20***98 | Seal-0-Ring; (Id=29.40mm) | 1 |
| 22***17 | Plate | 1 |
333-2958 Drive Gp-Swing -With Motor
| 20***72 | Motor & Mtg Group-Swing | 1 |
| 33***58 | Drive Group-Swing; -With Motor | 1 |
| 33***59 | Drive Group-Swing; -Without Motor | 1 |
333-2959 Drive Gp-Swing -Without Motor
| 09***30 | Ring; (Retaining) | 1 |
| 09***28 | Washer; (53x84x1-mm Thk) | 8 |
| 09***41 | Ring - Retaining | 1 |
191-2577 Fastener Gp-Swing & Final Dr
| 09***55 | Pin | 1 |
| 19***77 | Fastener Group-Swing & Final Dr | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
158-8987 Filter & Valve Gp-Pilot -Hydraulic Oil
| 15***87 | Filter & Valve Group-Pilot; -Hydraulic Oil | 1 |
| 21***09 | Valve Group-Pilot Relief; -Hydraulic Filter | 1 |
| 5I***70 | Filter-Oil; (Advanced Efficiency)(Hydraulic, Pilot) | 1 |
188-4140 Filter Gp-Oil -Hydraulic Return
| 12***03 | Seal-O-Ring (Id=185mm) | 2 |
| 12***34 | Valve As-Bypass | 1 |
| 15***84 | Seal-O-Ring | 1 |
188-4142 Filter Gp-Oil -Hydraulic Return
| 09***81 | Seal-O-Ring | 1 |
| 13***23 | Seal-O-Ring | 4 |
| 13***24 | Screw; (M3x0.5x5-mm) | 8 |
289-8194 Filter Gp-Oil -Hydraulic, Case Drain
| 09***21 | Filter-Oil; (Advanced Efficiency)(Hydraulic, Case Drain) | 1 |
| 28***94 | Filter Group-Oil; -Hydraulic, Case Drain | 1 |
| 28***95 | Head As-Filter | 1 |
227-0620 Gauge Gp-Sight -Hydraulic Oil Level
| 09***19 | Seal-O-Ring (Id=15.80mm) | 4 |
| 22***20 | Gauge Group-Sight; -Hydraulic Oil Level | 1 |
| 23***57 | Pipe | 1 |
295-9660 Head Gp-Pump
| 09***23 | Ring-Retaining; (External) | 1 |
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 4 |
| 12***70 | Sleeve | 1 |
194-0179 Hose Gp-Hydraulic -Control Valve, Stick
| 14***64 | Tube As | 1 |
| 16***69 | Hose As | 1 |
| 19***79 | Hose Group-Hydraulic; -Control Valve, Stick | 1 |
194-0177 Hose Gp-Hydraulic -Control Valve, Stick
| 19***77 | Hose Group-Hydraulic; -Control Valve, Stick | 1 |
| 19***78 | Hose Group-Hydraulic; -Control Valve, Stick | 1 |
| 19***79 | Hose Group-Hydraulic; -Control Valve, Stick | 1 |
194-0180 Hose Gp-Hydraulic -Control Valve, Boom
| 19***80 | Hose Group-Hydraulic; -Control Valve, Boom | 1 |
| 19***81 | Hose Group-Hydraulic; -Control Valve, Boom | 1 |
| 19***82 | Hose Group-Hydraulic; -Control Valve, Boom | 1 |
194-0174 Hose Gp-Hydraulic -Control Valve, Stick
| 16***60 | Hose Group-Hydraulic; (Control Valve, Stick) | 1 |
| 19***74 | Hose Group-Hydraulic; -Control Valve, Stick | 1 |
| 19***76 | Hose Group-Hydraulic; -Control Valve, Stick | 1 |
194-0182 Hose Gp-Hydraulic -Control Valve, Boom
| 11***79 | Flange-Special | 1 |
| 16***73 | Hose As | 1 |
| 16***23 | Tube As | 1 |
194-0181 Hose Gp-Hydraulic -Control Valve, Boom
| 16***62 | Hose As | 1 |
| 19***81 | Hose Group-Hydraulic; -Control Valve, Boom | 1 |
| 4J***20 | Seal (For Tilt Ports On Valve) | 1 |
194-0178 Hose Gp-Hydraulic -Control Valve, Stick
| 19***78 | Hose Group-Hydraulic; -Control Valve, Stick | 1 |
| 26***12 | Hose As | 1 |
| 4J***20 | Seal (For Tilt Ports On Valve) | 1 |
194-0176 Hose Gp-Hydraulic -Control Valve, Stick
| 14***65 | Tube As | 1 |
| 16***65 | Hose As | 1 |
| 19***76 | Hose Group-Hydraulic; -Control Valve, Stick | 1 |
355-5673 Hydraulic Ar
| 23***18 | Lines Group-Travel Motor; -Long Undercarriage | 1 |
| 24***38 | Lines Group-Control; -Rear | 1 |
| 24***40 | Lines Group-Hydraulic Oil Cooler | 1 |
352-3375 Hydraulic Ar
| 24***25 | Lines Group-Pilot; -Joystick, Pedals | 1 |
| 24***38 | Lines Group-Control; -Rear | 1 |
| 24***40 | Lines Group-Hydraulic Oil Cooler | 1 |
239-1632 Lines Gp-Boom Cylinder -Boom Lowering Control
| 10***50 | Clamp | 4 |
| 11***56 | Support As | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 8 |
292-2025 Lines Gp-Boom Cylinder -Load Control Valve
| 14***18 | Spacer; (13.5x30x10-mm Thk) | 8 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 2 |
| 27***66 | Support As | 2 |
356-2111 Lines Gp-Boom Cylinder
| 10***98 | Name-Plate (Type Of Machine:Ex1100), Bolt-Socket Head; (M10x1.5x40-mm) | 4 |
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 4 |
| 10***50 | Clamp | 2 |
248-9838 Lines Gp-Return -Rear
| 10***15 | Elbow Group | 1 |
| 11***34 | Tee-O-Ring | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
284-4973 Lines Gp-Front -Adjustable Gauge Undercarriage
| 10***01 | Bolt-Socket Head; (M10x1.5x20-mm) | 4 |
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 8 |
| 10***82 | Bolt-Socket Head; (M12x1.75x90-mm) | 4 |
269-9562 Lines Gp-Front -Quick Coupler
| 10***84 | Guard | 1 |
| 10***87 | Hose As (Nom 06, L=2500mm) | 1 |
| 11***52 | Hose As | 1 |
260-7870 Lines Gp-Boom Cylinder
| 10***98 | Name-Plate (Type Of Machine:Ex1100), Bolt-Socket Head; (M10x1.5x40-mm) | 4 |
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 4 |
| 10***50 | Clamp | 2 |
283-8348 Lines Gp-Front -Fore Boom
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 8 |
| 10***85 | Bolt-Socket Head; (M12x1.75x60-mm) | 2 |
| 18***80 | Seal; (8.8-cm) | 0 |
355-8760 Lines Gp-Front -Impl, Swing, Travel, Work Tool
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 8 |
| 10***85 | Bolt-Socket Head; (M12x1.75x60-mm) | 2 |
| 28***05 | Tube As | 1 |
278-7040 Lines Gp-Front -Cab Tilt
| 08***56 | 90 Degrees Elbow | 1 |
| 09***81 | Tape-Color; (Orange) | 2 |
| 09***85 | Tape-Color; (Red) | 2 |
355-8761 Lines Gp-Front -Fore Boom
| 09***81 | Tape-Color; (Orange) | 2 |
| 09***85 | Tape-Color; (Red) | 2 |
| 11***45 | Guard | 1 |
356-2113 Lines Gp-Front -Adjustable Gauge Undercarriage
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
| 16***69 | Adapter Assembly | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
330-2389 Lines Gp-Front -System 18, Combined Function
| 08***32 | Hose As | 1 |
| 08***35 | Hose As | 1 |
| 10***97 | Bolt-Socket Head; (M12x1.75x50-mm) | 16 |
255-1926 Lines Gp-Front -Medium Pressure Circuit
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
| 16***69 | Adapter Assembly | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
283-8356 Lines Gp-Front -Control Valve, Tilt Cab
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
| 14***14 | Reducer As | 1 |
357-0081 Lines Gp-Front -Universal Quick Coupler
| 09***83 | Nut-Self-Locking; (M10x1.50 Thd) | 6 |
| 10***96 | Bolt-Socket Head; (M10x1.5x50-mm) | 6 |
| 10***02 | Bolt-Socket Head; (M12x1.75x30-mm) | 8 |
260-7869 Lines Gp-Front -Impl, Swing, Travel, Work Tool
| 08***32 | Hose As | 1 |
| 08***35 | Hose As | 1 |
| 10***97 | Bolt-Socket Head; (M12x1.75x50-mm) | 16 |
357-0080 Lines Gp-Front -System 18, Combined Function
| 10***84 | Guard | 1 |
| 10***87 | Hose As (Nom 06, L=2500mm) | 1 |
| 11***52 | Hose As | 1 |
283-8355 Lines Gp-Front -Free Rotate
| 09***81 | Tape-Color; (Orange) | 2 |
| 09***85 | Tape-Color; (Red) | 2 |
| 11***45 | Guard | 1 |
355-8764 Lines Gp-Front -Control Valve
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
| 14***14 | Reducer As | 1 |
357-0077 Lines Gp-Front -Medium Pressure
| 10***01 | Bolt-Socket Head; (M10x1.5x20-mm) | 4 |
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 8 |
| 10***82 | Bolt-Socket Head; (M12x1.75x90-mm) | 4 |
255-1924 Lines Gp-Front -System 17, Combined Function
| 09***32 | Seal-O-Ring (Id=28.24mm) | 2 |
| 10***01 | Bolt-Socket Head; (M10x1.5x20-mm) | 8 |
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 8 |
248-9840 Lines Gp-Hydraulic Oil Cooler
| 08***56 | 90 Degrees Elbow | 1 |
| 08***38 | Hose As | 1 |
| 10***00 | Bolt-Socket Head; (M10x1.5x110-mm) | 6 |
255-2079 Lines Gp-Motor -Reversing Fan
| 08***02 | Hose As. | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***31 | Connector-Filter | 1 |
255-1844 Lines Gp-Pilot -Control Valve, Travel Valve
| 08***56 | 90 Degrees Elbow | 1 |
| 08***71 | Hose As (Nom 06, L=960mm) | 1 |
| 08***83 | Hose As (Nom 06, L=2530mm) | 1 |
356-2110 Lines Gp-Pilot -Control Valve
| 08***56 | 90 Degrees Elbow | 1 |
| 09***77 | Ring-Back Up | 1 |
| 14***51 | Connector-Filter | 1 |
355-8762 Lines Gp-Pilot -Stick Load Control Valve
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***71 | Elbow, 45, -6 Orfs Fm Swivel | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
355-8759 Lines Gp-Pilot -Control Valve
| 09***92 | Locknut; (M6x1-Thd) | 2 |
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 2 |
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 1 |
355-8756 Lines Gp-Pilot -Tilt Cab
| 08***02 | Hose As. | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***31 | Connector-Filter | 1 |
355-8766 Lines Gp-Pilot -Cab Lowering
| 08***11 | Hose As (Nom 06, L=450mm) | 1 |
| 08***41 | Hose As. | 1 |
| 08***31 | Hose As (Nom 06, L=600mm) | 2 |
260-7867 Lines Gp-Pilot -Control Valve
| 08***11 | Hose As (Nom 06, L=450mm) | 1 |
| 08***41 | Hose As. | 1 |
| 08***31 | Hose As (Nom 06, L=600mm) | 3 |
285-6451 Lines Gp-Pilot -Cab Lowering
| 09***79 | Tape-Color; (White) | 2 |
| 10***36 | Clip | 1 |
| 11***52 | Hose As | 1 |
255-1843 Lines Gp-Pilot -Third Pedal, Pilot Valve
| 08***84 | Hose As. | 2 |
| 21***59 | Hose As | 2 |
| 25***43 | Lines Group-Pilot; -Third Pedal, Pilot Valve | 1 |
355-8755 Lines Gp-Pilot -Variable Adjustable Boom
| 09***80 | Tape - Color; (Blue) | 2 |
| 09***82 | Tape-Color; (Yellow) | 2 |
| 10***74 | Hose As (Nom 06, L=2200mm) | 8 |
255-1659 Lines Gp-Pilot -Heavy Lift
| 08***02 | Hose As. | 1 |
| 08***62 | Hose As | 1 |
| 08***65 | Hose As (Nom 06, L=570mm) | 2 |
356-2114 Lines Gp-Pilot -Main Hydraulic
| 08***56 | 90 Degrees Elbow | 1 |
| 08***71 | Hose As (Nom 06, L=960mm) | 1 |
| 08***83 | Hose As (Nom 06, L=2530mm) | 1 |
288-9141 Lines Gp-Pilot -Cab Lowering
| 08***56 | 90 Degrees Elbow | 1 |
| 09***77 | Ring-Back Up | 1 |
| 14***51 | Connector-Filter | 1 |
307-5106 Lines Gp-Pilot -Main Pump
| 08***56 | 90 Degrees Elbow | 1 |
| 08***83 | Hose As (Nom 06, L=2530mm) | 1 |
| 10***83 | Hose As; (Nom 06, L=2150mm) | 1 |
275-1495 Lines Gp-Pilot -Cab
| 09***92 | Locknut; (M6x1-Thd) | 2 |
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 2 |
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 1 |
283-8353 Lines Gp-Pilot -Tilt Cab
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***71 | Elbow, 45, -6 Orfs Fm Swivel | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
355-8765 Lines Gp-Pilot -Control Valve
| 09***79 | Tape-Color; (White) | 2 |
| 10***36 | Clip | 1 |
| 11***52 | Hose As | 1 |
255-1853 Lines Gp-Pilot -Boom Float
| 08***56 | 90 Degrees Elbow | 1 |
| 08***11 | Hose As (Nom 06, L=450mm) | 1 |
| 08***06 | Hose As | 1 |
260-7863 Lines Gp-Pilot -Rotator
| 08***11 | Hose As (Nom 06, L=450mm) | 1 |
| 08***41 | Hose As. | 1 |
| 08***31 | Hose As (Nom 06, L=600mm) | 3 |
260-7861 Lines Gp-Pilot -Medium Pressure
| 10***71 | Hose As (Nom 06, L=2430mm) | 1 |
| 11***52 | Hose As | 1 |
| 12***08 | Guard | 2 |
283-8354 Lines Gp-Pilot -1-Pump/2-Pump
| 09***80 | Tape - Color; (Blue) | 2 |
| 09***82 | Tape-Color; (Yellow) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
357-0076 Lines Gp-Pilot -Boom Float
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 3 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 3 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 2 |
330-2390 Lines Gp-Pilot -Work Tool, 4-Function, Flow Control
| 08***02 | Hose As. | 1 |
| 10***31 | Connector-Filter | 1 |
| 12***69 | Fitting-Orfs | 1 |
283-8362 Lines Gp-Pilot -Fore Boom
| 09***78 | Tape-Color; (Purple) | 2 |
| 09***79 | Tape-Color; (White) | 2 |
| 10***85 | Hose As (Nom 06, L=3000mm); (Nom 06, L=30000mm) | 1 |
355-8763 Lines Gp-Pilot -1-Pump, 2-Pump
| 09***80 | Tape - Color; (Blue) | 2 |
| 09***82 | Tape-Color; (Yellow) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
283-8357 Lines Gp-Pilot -Control Valve
| 08***84 | Hose As. | 2 |
| 14***52 | Union As | 2 |
| 28***57 | Lines Group-Pilot; -Control Valve | 1 |
248-9825 Lines Gp-Pilot -Joystick, Pedals
| 08***02 | Hose As. | 1 |
| 08***66 | Hose As | 1 |
| 08***72 | Hose As (Nom 06, L=1000mm) | 1 |
355-8758 Lines Gp-Pilot -Heavy Lift
| 08***11 | Hose As (Nom 06, L=450mm) | 1 |
| 08***41 | Hose As. | 1 |
| 08***31 | Hose As (Nom 06, L=600mm) | 2 |
355-8757 Lines Gp-Pilot -Joystick, Pedals
| 08***02 | Hose As. | 1 |
| 08***66 | Hose As | 1 |
| 08***72 | Hose As (Nom 06, L=1000mm) | 1 |
283-8352 Lines Gp-Pilot -Stick Load Control Valve
| 11***52 | Hose As | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
| 14***35 | Tee, -6 Orb / Orfs | 1 |
260-7857 Lines Gp-Pilot -Comb Fctn, Joystk W/Slide Ctl
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 4 |
| 14***38 | Adapter, -6 Orb / Orfs X-Long | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 3 |
357-0078 Lines Gp-Pilot -Medium Pressure
| 10***15 | Elbow Group | 1 |
| 12***13 | Plate | 1 |
| 13***50 | Screen As; (Hydraulic Tank) | 1 |
307-5122 Lines Gp-Pump -Main Hydraulic
| 08***44 | Hose | 1 |
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 4 |
| 10***91 | Flange; (Special) | 1 |
356-2112 Lines Gp-Pump -Adjustable Gauge Undercarriage
| 08***44 | Hose | 1 |
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 4 |
| 10***91 | Flange; (Special) | 1 |
357-0079 Lines Gp-Pump -Auxiliary
| 09***83 | Nut-Self-Locking; (M10x1.50 Thd) | 2 |
| 10***02 | Bolt-Socket Head; (M12x1.75x30-mm) | 12 |
| 10***89 | Bolt-Socket Head; (M12x1.75x80-mm) | 16 |
260-7862 Lines Gp-Pump -1-Pump/2-Pump, 1-Way Flow
| 12***64 | Valve Group-Manual; -Track | 1 |
| 12***31 | Valve Group-Pressure Reducing; -Track | 1 |
| 12***72 | Tee | 1 |
356-2115 Lines Gp-Pump -Main Hydraulic
| 10***15 | Elbow Group | 1 |
| 12***13 | Plate | 1 |
| 13***50 | Screen As; (Hydraulic Tank) | 1 |
284-4972 Lines Gp-Pump -Adjustable Gauge Undercarriage
| 08***44 | Hose | 1 |
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 4 |
| 10***91 | Flange; (Special) | 1 |
248-9845 Lines Gp-Return -Filters
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***77 | Bolt-Socket Head; (M10x1.5x45-mm) | 4 |
| 10***24 | Bolt-Socket Head; (M12x1.75x100-mm) | 4 |
255-2078 Lines Gp-Return -Load Control, Boom Cylinder
| 22***59 | Sensor As-Pressure; (1-Pump/2-Pump, 1-Way Flow) | 1 |
| 25***78 | Lines Group-Return; -Load Control, Boom Cylinder | 1 |
245-5080 Lines Gp-Sensor -Overload Warning Device
| 10***18 | Grommet | 2 |
| 14***27 | Connector Group | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
359-3474 Lines Gp-Travel Motor -Adjustable Gauge Undercarriage
| 23***97 | Manifold Group-Control; -Pilot Oil Supply | 1 |
| 23***98 | Manifold Group-Control; -Pilot Oil Supply | 1 |
| 35***74 | Lines Group-Travel Motor; -Adjustable Gauge Undercarriage | 1 |
284-4974 Lines Gp-Travel Motor -Adjustable Gauge Undercarriage
| 12***18 | Spacer | 2 |
| 12***12 | Support As. | 1 |
| 12***74 | Support As. | 1 |
239-1618 Lines Gp-Travel Motor
| 12***18 | Spacer | 2 |
| 12***12 | Support As. | 1 |
| 12***74 | Support As. | 1 |
239-8998 Manifold Gp-Control -Pilot Oil Supply
| 23***98 | Manifold Group-Control; -Pilot Oil Supply | 1 |
| 24***76 | Motor Group-Piston; -Hydraulic Fan | 1 |
215-5037 Manifold Gp-Control -Pilot Oil Supply
| 12***91 | Valve Group-Solenoid; -Hydraulic Activation Control | 3 |
| 19***96 | Valve-Check | 1 |
| 19***99 | Spring | 1 |
239-8697 Manifold Gp-Control -Pilot Oil Supply
| 12***91 | Valve Group-Solenoid; -Hydraulic Activation Control | 3 |
| 19***96 | Valve-Check | 1 |
| 19***99 | Spring | 1 |
247-8834 Motor & Mtg Gp-Hydraulic Fan -Reversing
| 24***34 | Motor & Mtg Group-Hydraulic Fan; -Reversing | 1 |
| 33***73 | Motor Group-Swing | 1 |
| 6V***04 | Circlip - External | 1 |
200-3372 Motor & Mtg Gp-Swing
| 09***08 | Bolt-Socket Head; (M16x2x140-mm) | 4 |
| 20***72 | Motor & Mtg Group-Swing | 1 |
| 20***19 | Valve Group-Travel Counterbalance | 1 |
191-5606 Motor & Mtg Gp-Travel
| 15***22 | Swashplate | 1 |
| 18***03 | Seal-Oil | 1 |
| 19***06 | Motor & Mtg Group-Travel | 1 |
234-4638 Motor Gp-Piston -Hydraulic Fan
| 15***22 | Swashplate | 1 |
| 18***03 | Seal-Oil | 1 |
| 19***82 | Shim; (2.5-mm Thk) | 1 |
242-6776 Motor Gp-Piston -Hydraulic Fan
| 20***78 | Valve Group-Relief; -Swing Motor | 2 |
| 24***76 | Motor Group-Piston; -Hydraulic Fan | 1 |
| 33***79 | Motor Group-Swing | 1 |
334-9973 Motor Gp-Swing
| 09***00 | Seal-O-Ring (Id=33.70mm) | 2 |
| 09***33 | Seal-Lip Type | 1 |
| 09***11 | Pin; (Spring) | 2 |
334-9979 Motor Gp-Swing
| 08***86 | Adapter | 1 |
| 09***72 | Seal - O-Ring (4.80 mm Id) | 2 |
| 09***85 | Seal- -O-Ring (17.80 mm Id) | 1 |
271-6376 Motor Gp-Travel
| 10***66 | Bolt; (Self Locking) (M16x2x40mm) | 8 |
| 19***11 | Washer; (17x40x8-mm Thk) | 4 |
| 26***04 | Support As | 1 |
266-1161 Mounting Gp-Main Control Valve
| 26***61 | Mounting Group-Main Control Valve | 1 |
| 6E***45 | Seal-O-Ring | 1 |
| 9T***06 | Plug | 1 |
6e-4816 Plug Gp-Control Valve
| 6E***45 | Seal-O-Ring | 1 |
| 6E***16 | Plug Group-Control Valve | 1 |
| 9T***06 | Plug | 1 |
6e-2746 Plug Gp-Control Valve
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
| 6E***46 | Plug Group-Control Valve | 1 |
| 6E***15 | Plug | 1 |
6e-4793 Plug Gp-Control Valve
| 10***48 | Plug Group-Control Valve | 1 |
| 6E***46 | Plug Group-Control Valve | 1 |
| 6E***93 | Plug Group-Control Valve | 2 |
106-6248 Plug Gp-Control Valve
| 10***48 | Plug Group-Control Valve | 1 |
| 20***35 | Pump Group-Gear | 1 |
| 23***19 | Seal-O-Ring | 1 |
259-0682 Pump & Mtg Gp-Auxiliary
| 25***82 | Pump & Mtg Group-Auxiliary | 1 |
| 27***69 | Coupling Group-Pump | 1 |
| 29***74 | Pump Group-Main Hydraulic; -Slipper | 1 |
310-9486 Pump & Mtg Gp-Main Hydraulic
| 09***95 | Pin, Dowel | 4 |
| 10***41 | Ring-Snap | 2 |
| 13***42 | Flange | 1 |
207-8235 Pump Gp-Gear
| 10***81 | Bolt; (Socket Head) (M12x1.75x35mm) | 2 |
| 20***35 | Pump Group-Gear | 1 |
| 23***19 | Seal-O-Ring | 1 |
295-9674 Pump Gp-Main Hydraulic
| 12***94 | Plug; (Break Off) | 1 |
| 13***80 | Plug | 2 |
| 15***25 | Bearing As-Roller | 1 |
322-8733 Pump Gp-Piston -With Pilot Gear Pump
| 19***79 | Pin | 3 |
| 19***80 | Ring-Retaining | 1 |
| 19***81 | Disc-Thrust | 1 |
259-0815 Pump Gp-Piston -Hydraulic Fan
| 09***82 | Pin-Spring | 4 |
| 09***29 | Ring; (Retaining) | 2 |
| 09***44 | Ring-Retaining | 1 |
233-2530 Rotating Gp-Motor -Hydraulic Fan
| 15***17 | Spring | 1 |
| 15***37 | Plate | 1 |
| 19***79 | Pin | 3 |
266-7833 Rotating Gp-Pump
| 09***39 | Spring | 1 |
| 12***84 | Rod | 1 |
| 20***00 | Screen As; (Hydraulic Tank) | 1 |
259-0922 Screen Gp-Hydraulic -Tank
| 09***25 | Seal-O-Ring (Id=89.60mm) | 3 |
| 09***16 | Seal-O-Ring (Id=109.40mm) | 1 |
| 15***82 | Seal | 5 |
234-4440 Swivel Gp
| 23***40 | Swivel Group | 1 |
| 23***15 | Kit-Seal; (Swivel) | 1 |
234-7109 Swivel Gp
| 23***09 | Swivel Group | 2 |
| 35***02 | Swivel | 1 |
357-7901 Swivel Gp -Hydraulic Electronic
| 15***87 | Filter & Valve Group-Pilot; -Hydraulic Oil | 1 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
| 16***90 | Valve As-Fluid Sampling; (Coolant) | 1 |
239-1611 Tank & Filter Gp-Hydraulic
| 15***87 | Filter & Valve Group-Pilot; -Hydraulic Oil | 1 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
| 16***90 | Valve As-Fluid Sampling; (Coolant) | 1 |
269-9757 Tank & Mtg Gp-Hydraulic
| 09***26 | Lockwasher-Tooth; (M4 Id) | 2 |
| 09***08 | Seal-O-Ring (Id=44.70mm) | 1 |
| 09***35 | Seal-O-Ring (Id=229.30mm) | 1 |
289-5565 Tank Gp-Hydraulic
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
| 25***78 | Valve Group-Control; -Auxiliary | 2 |
| 28***65 | Tank Group-Hydraulic | 1 |
270-5677 Valve & Mtg Gp-Control
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
| 25***78 | Valve Group-Control; -Auxiliary | 1 |
| 27***77 | Valve & Mtg Group-Control; -Variable Adjustable Boom | 1 |
282-2745 Valve & Mtg Gp-Main Control
| 28***45 | Valve & Mtg Group-Main Control | 1 |
| 34***32 | Switch As-Rocker; (Fine Swing) | 1 |
282-2743 Valve & Mtg Gp-Main Control
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
| 25***78 | Valve Group-Control; -Auxiliary | 2 |
| 28***43 | Valve & Mtg Group-Main Control | 1 |
334-2307 Valve Ar-Swing -Without Fine Swing
| 33***07 | Valve Ar-Swing; -Without Fine Swing | 1 |
8j-6875 Valve Gp-Shuttle
| 11***85 | Plug | 4 |
| 2D***42 | Ball 6.35 mm(.25 In.)Diameter | 4 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 4 |
357-9264 Valve Gp-Bank 3
| 09***85 | Seal- -O-Ring (17.80 mm Id) | 1 |
| 09***01 | Seal-O-Ring (Id=34.70mm) | 1 |
| 09***02 | Seal-O-Ring | 1 |
297-0370 Valve Gp-Check
| 09***98 | Spring, Check | 1 |
| 10***68 | Plug-Pipe | 11 |
| 11***59 | Plug; (Pipe) (3/8-18 Thd) | 3 |
254-3080 Valve Gp-Control -Quick Coupler
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
| 09***87 | Ring, Back-Up; (Buck Up) | 1 |
| 15***59 | Housing | 1 |
285-1347 Valve Gp-Control -Heavy Lift, Lh
| 10***93 | Spring | 2 |
| 10***94 | Spring | 1 |
| 10***96 | Spring | 1 |
310-7149 Valve Gp-Control -Cab Tilt, Rotator
| 09***90 | Seal-O-Ring (Id=21.80mm) | 5 |
| 09***87 | Ring, Back-Up; (Buck Up) | 5 |
| 11***59 | Plug; (Pipe) (3/8-18 Thd) | 1 |
352-6847 Valve Gp-Control -Without Covers, Housings
| 09***75 | Seal - O-Ring (7.80 mm Id) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 3 |
| 09***03 | Seal-O-Ring | 1 |
285-1357 Valve Gp-Control -Without Covers, Housings
| 09***90 | Seal-O-Ring (Id=21.80mm) | 5 |
| 09***87 | Ring, Back-Up; (Buck Up) | 5 |
| 11***59 | Plug; (Pipe) (3/8-18 Thd) | 1 |
285-1531 Valve Gp-Control -Medium Pressure
| 13***86 | Harness As-Solenoid; (Hammer Solenoid) | 1 |
| 16***07 | Valve Group-Solenoid; (Medium Pressure) | 1 |
| 17***45 | Valve As | 1 |
352-6851 Valve Gp-Control -Heavy Lift, Lh
| 10***93 | Spring | 3 |
| 10***94 | Spring | 1 |
| 10***96 | Spring | 1 |
285-1348 Valve Gp-Control -Without Covers, Housings
| 10***93 | Spring | 3 |
| 10***94 | Spring | 1 |
| 10***96 | Spring | 1 |
352-6857 Valve Gp-Control -Without Covers, Housings
| 09***22 | Seal-O-Ring (Id=20.80mm) | 2 |
| 09***82 | Seal-O-Ring (Id=13.80mm) | 1 |
| 09***65 | Spring | 2 |
285-1362 Valve Gp-Control
| 17***48 | Valve As-Control; (End Cover) | 1 |
| 26***03 | Valve Group-Relief; (160-Bar) (2321-Psi) | 2 |
| 26***45 | Valve As-Relief; (Main) | 1 |
234-4624 Valve Gp-Control -Reverse Flow Fan
| 10***93 | Spring | 1 |
| 15***76 | Bolt-Special | 1 |
| 23***24 | Valve Group-Control; -Reverse Flow Fan | 1 |
244-8400 Valve Gp-Control -Without Covers, Housings
| 12***91 | Valve Group-Solenoid; -Hydraulic Activation Control | 1 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 2 |
| 17***32 | Kit-Seal; (Quick Coupler Valve) | 1 |
259-7378 Valve Gp-Control -Auxiliary
| 09***75 | Seal - O-Ring (7.80 mm Id) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 3 |
| 09***03 | Seal-O-Ring | 1 |
352-6854 Valve Gp-Control -Without Covers, Housings
| 10***93 | Spring | 2 |
| 10***94 | Spring | 1 |
| 10***96 | Spring | 1 |
201-9236 Valve Gp-Flow Control -Boom Float, Pilot Oil
| 08***66 | Spring | 1 |
| 09***94 | Seal-O-Ring (Id=25.70mm) | 1 |
| 09***89 | Ring, Back-Up | 1 |
255-5680 Valve Gp-Load Control -Stick Drift Red, Line Relief
| 08***66 | Spring | 1 |
| 09***94 | Seal-O-Ring (Id=25.70mm) | 1 |
| 09***89 | Ring, Back-Up | 1 |
255-5683 Valve Gp-Load Control -Boom Drift Red, Line Relief
| 12***97 | Ring | 1 |
| 15***35 | Shim; (0.1-mm Thk) | 3 |
| 19***41 | Plug As | 1 |
263-1962 Valve Gp-Load Control -Boom Lowering, Drift Reduction
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
| 20***64 | Valve Group-Relief; -Negative Flow Control | 1 |
| 26***62 | Valve Group-Load Control; -Boom Lowering, Drift Reduction | 1 |
285-1345 Valve Gp-Main Control -Heavy Lift
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
| 20***64 | Valve Group-Relief; -Negative Flow Control | 1 |
| 28***45 | Valve Group-Main Control; -Heavy Lift | 1 |
270-5692 Valve Gp-Manual -Boom Lower
| 09***76 | Seal | 4 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 4 |
| 09***28 | Sleeve | 4 |
121-9164 Valve Gp-Manual
| 12***64 | Valve Group-Manual; -Track | 1 |
| 16***13 | Seat | 1 |
| 16***14 | Plug | 1 |
297-0530 Valve Gp-Pilot -Joystick, Rh
| 09***76 | Seal | 4 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 4 |
| 09***28 | Sleeve | 4 |
310-0414 Valve Gp-Pilot -Travel
| 09***84 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
| 09***96 | Seal-O-Ring (Id=28.70mm) | 1 |
297-0531 Valve Gp-Pilot -Joystick, Lh
| 08***10 | Setscrew; (M10x21-mm) | 4 |
| 08***08 | Pedal | 2 |
| 09***73 | Bolt; (Socket Head) (M12x1.75x60mm) | 2 |
215-4909 Valve Gp-Pilot Relief -Hydraulic Filter
| 15***81 | Plug-Socket Head; (9/16-18 Thd) | 1 |
| 21***09 | Valve Group-Pilot Relief; -Hydraulic Filter | 1 |
| 24***87 | Valve Group-Pressure Reducing | 1 |
232-4102 Valve Gp-Pressure Reducing -Stick
| 09***80 | Seal-O-Ring (Id=11.80mm) | 2 |
| 09***82 | Seal-O-Ring (Id=13.80mm) | 2 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 2 |
310-0210 Valve Gp-Pressure Reducing -Boom, Swing Priority
| 14***74 | Valve | 1 |
| 14***77 | Pin | 1 |
| 15***86 | Spring | 1 |
124-1331 Valve Gp-Pressure Reducing
| 09***80 | Seal-O-Ring (Id=11.80mm) | 2 |
| 09***82 | Seal-O-Ring (Id=13.80mm) | 2 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 2 |
323-7898 Valve Gp-Priority -Swing
| 03***53 | Seal-O-Ring; (08.92mm Id) | 2 |
| 03***43 | Seal-O-Ring | 1 |
| 13***89 | Plug | 1 |
259-0907 Valve Gp-Pump Control -Hydraulic Fan
| 10***70 | Spring | 1 |
| 10***71 | Valve | 1 |
| 25***07 | Valve Group-Pump Control; -Hydraulic Fan-Fan Pump | 1 |
204-2678 Valve Gp-Relief
| 09***86 | Seal - O-Ring (19.80 mm Id) | 2 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
| 09***01 | Seal-O-Ring (Id=34.70mm) | 1 |
255-5662 Valve Gp-Relief -Line
| 09***78 | Seal-O-Ring (Id=9.80mm) | 1 |
| 10***52 | Ring | 2 |
| 10***53 | Ring | 2 |
206-3164 Valve Gp-Relief
| 09***78 | Seal-O-Ring (Id=9.80mm) | 1 |
| 10***52 | Ring | 2 |
| 10***53 | Ring | 2 |
147-4161 Valve Gp-Relief
| 10***70 | Spring | 1 |
| 10***71 | Valve | 1 |
| 14***61 | Valve Group-Relief; -Negative Flow Control | 1 |
255-5747 Valve Gp-Relief
| 09***79 | Seal-O-Ring (Id=10.80mm) | 1 |
| 09***84 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***87 | Seal-O-Ring (Id=20.80mm) | 1 |
204-2755 Valve Gp-Relief
| 14***61 | Valve Group-Relief; -Negative Flow Control | 1 |
| 15***39 | Cover | 1 |
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
147-4163 Valve Gp-Relief
| 09***98 | Seal-O-Ring (Id=29.40mm) | 1 |
| 14***63 | Valve Group-Relief; -Negative Flow Control | 1 |
| 16***65 | Ring-Back Up; (Backup) | 1 |
255-5661 Valve Gp-Relief -Line
| 09***78 | Seal-O-Ring (Id=9.80mm) | 1 |
| 10***52 | Ring | 2 |
| 10***53 | Ring | 2 |
310-0393 Valve Gp-Relief
| 13***74 | Bolt-Socket Head; (M5x0.8x20-mm) | 1 |
| 15***72 | Bolt-Socket Head; (M4x0.07-Thd) | 1 |
| 22***45 | Washer; (Stop) | 1 |
226-9860 Valve Gp-Shutoff
| 22***60 | Valve Group-Shutoff; -Cab Manual Lowering | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 2 |
| 4B***84 | Ball | 1 |
123-2549 Valve Gp-Shuttle
| 12***31 | Body-Valve | 1 |
| 12***49 | Valve Group-Shuttle | 1 |
| 12***52 | Connector | 1 |
112-0083 Valve Gp-Shuttle
| 11***83 | Valve Group-Shuttle; -Third Pedal, Straight Travel | 1 |
| 12***52 | Connector | 2 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
164-6979 Valve Gp-Shuttle
| 12***49 | Valve Group-Shuttle | 1 |
| 16***79 | Valve Group-Shuttle | 1 |
| 6V***97 | Seal (Later Machines And Field Installed) | 2 |
185-0462 Valve Gp-Shuttle
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
164-6980 Valve Gp-Shuttle
| 09***78 | Seal-O-Ring (Id=9.80mm) | 7 |
| 10***79 | Plug | 7 |
| 16***80 | Valve Group-Shuttle | 1 |
123-2430 Valve Gp-Shuttle
| 12***30 | Valve Group-Shuttle; (Work Tool) | 1 |
| 12***11 | Tee-Orfs | 1 |
| 12***52 | Connector | 2 |
171-0188 Valve Gp-Solenoid
| 09***19 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***78 | Seal-O-Ring (Id=9.80mm) | 1 |
| 09***22 | Bolt-Socket Head; (M5x0.8x10-mm) | 2 |
121-6303 Valve Gp-Solenoid
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
| 11***16 | Valve Group-Solenoid; -Grapple Signal-Ground Saw, Grapple Control | 1 |
| 12***03 | Valve Group-Solenoid; -Variable Adjustable Boom | 1 |
111-9916 Valve Gp-Solenoid
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
315-4412 Valve Gp-Solenoid
| 31***12 | Valve Group-Solenoid; -Fine Swing | 1 |
| 33***84 | Valve Group-Solenoid & Relief | 1 |
185-0472 Valve Gp-Solenoid
| 11***25 | Plug | 1 |
| 15***06 | Seal-O-Ring; (11.89mm Id) | 1 |
| 18***72 | Valve Group-Solenoid; -Boom Float | 1 |
225-4558 Valve Gp-Solenoid
| 12***91 | Valve Group-Solenoid; -Hydraulic Activation Control | 1 |
| 22***58 | Valve Group-Solenoid; -Pump Control | 1 |
| 24***93 | Block | 1 |
259-7430 Valve Gp-Solenoid -Pressure Reducing
| 09***85 | Seal- -O-Ring (17.80 mm Id) | 1 |
| 09***01 | Seal-O-Ring (Id=34.70mm) | 1 |
| 09***02 | Seal-O-Ring | 1 |
242-6880 Valve Gp-Solenoid
| 12***91 | Valve Group-Solenoid; -Hydraulic Activation Control | 1 |
| 24***80 | Valve Group-Solenoid | 1 |
| 8T***88 | Screw (Required Only When Bosch Alternator Is Fitted) | 2 |
258-6749 Valve Gp-Solenoid
| 11***16 | Valve Group-Solenoid; -Grapple Signal-Ground Saw, Grapple Control | 4 |
| 25***49 | Valve Group-Solenoid | 1 |
| 8T***88 | Screw (Required Only When Bosch Alternator Is Fitted) | 8 |
225-4518 Valve Gp-Solenoid
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 11***23 | Nut Assem.; (M6x1-Thd) | 1 |
| 22***18 | Valve Group-Solenoid; -Pump Control | 1 |
121-1491 Valve Gp-Solenoid
| 09***19 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***78 | Seal-O-Ring (Id=9.80mm) | 1 |
| 09***22 | Bolt-Socket Head; (M5x0.8x10-mm) | 2 |
297-0371 Valve Gp-Solenoid
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 12***14 | Seal-O-Ring (Id=10.82mm) | 1 |
| 12***15 | Seal-O-Ring (Id=12.42mm) | 1 |
259-7429 Valve Gp-Solenoid
| 11***16 | Valve Group-Solenoid; -Grapple Signal-Ground Saw, Grapple Control | 2 |
| 25***29 | Valve Group-Solenoid; -4-Function | 1 |
| 8T***88 | Screw (Required Only When Bosch Alternator Is Fitted) | 4 |
297-0265 Valve Gp-Solenoid & Relief
| 29***65 | Valve Group-Solenoid & Relief | 1 |
| 32***59 | Valve Group-Solenoid & Relief | 1 |
335-0084 Valve Gp-Solenoid & Relief
| 09***76 | Seal-O-Ring | 1 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***98 | Seal-O-Ring (Id=29.40mm) | 2 |
323-7559 Valve Gp-Solenoid & Relief
| 09***97 | Seal-O-Ring (Id=29.70mm) | 1 |
| 09***04 | Seal-O-Ring (Id=39.70mm) | 1 |
| 09***91 | Ring-Backup | 1 |
323-7558 Valve Gp-Solenoid & Relief -With Block
| 08***38 | Seal-O-Ring | 1 |
| 10***41 | Ring; (Retaining) | 1 |
| 10***17 | Spring | 1 |
322-8716 Valve Gp-Swing Cushion -Fine Swing
| 09***45 | Washer; (28.5x37x2-mm Thk) | 2 |
| 20***55 | Valve Group-Relief; -Crossover | 2 |
| 20***20 | Spring | 2 |
204-2819 Valve Gp-Travel Counterbalance
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 2 |
| 11***36 | Clip | 3 |
| 20***19 | Valve Group-Travel Counterbalance | 1 |
Lubrication System
187-0474 Filter Gp-Engine Oil
| 18***74 | Filter Group-Engine Oil | 1 |
| 19***31 | Hose-Disposal; (Fumes) | 1 |
| 22***18 | Bracket | 1 |
196-1829 Fumes Disposal Gp
| 19***26 | Bracket As | 1 |
| 19***29 | Fumes Disposal Group | 1 |
| 20***74 | Gauge-Oil Level; (Dipstick, Engine) | 1 |
242-1586 Gauge Gp-Oil Level (Dipstick) -Engine
| 03***34 | Seal-O-Ring | 1 |
| 19***52 | Gasket | 1 |
| 20***82 | Bolt; (M8x1.25x25-mm) | 2 |
202-6603 Lines Gp-Engine Oil
| 09***88 | Clamp; (Hose) | 1 |
| 20***03 | Lines Group-Engine Oil | 1 |
| 5P***43 | Hose 34 cm (13.39 In.) | 0 |
239-6408 Lines Gp-Engine Oil Drain
| 16***66 | Tube As | 1 |
| 18***98 | Connector As | 1 |
| 18***04 | Elbow As; (90 Degree) | 1 |
165-4465 Lines Gp-Turbocharger Oil
| 16***65 | Lines Group-Turbocharger Oil | 1 |
| 18***99 | Connector As | 1 |
| 18***04 | Elbow As; (90 Degree) | 1 |
239-6409 Mounting Gp-Engine Oil Filter
| 22***44 | Gear Assem.; (60 Teeth) | 1 |
| 23***09 | Mounting Group-Engine Oil Filter | 1 |
| 33***05 | Pump As-Engine Oil | 1 |
195-8098 Pump Gp-Engine Oil
| 19***98 | Pump Group-Engine Oil; (Engine Oil) | 1 |
| 20***93 | Gasket | 1 |
| 29***67 | Core As-Oil Cooler; (Engine) | 1 |
Machine Arrangement
352-3376 Chassis Ar
| 23***24 | Sensor Group-Liquid Level; -Water In Fuel | 1 |
| 23***52 | Lines Group-Fuel | 1 |
| 23***83 | Tank & Mtg Group-Fuel | 1 |
287-6796 Conversion Ar-Machine -Demolition
| 13***87 | Guard Group-Swivel; (Swivel) | 1 |
| 22***79 | Air Conditioner Ar | 1 |
| 23***52 | Roller Ar-Track & Carrier | 1 |
355-5670 Oem Ar-Mobile Hyd Power Unit
| 18***60 | Guard Group-Track Guide; -Full Length | 1 |
| 23***71 | Alarm Group-Travel; -Backup | 1 |
| 24***69 | Air Cleaner Ar; -Precleaner | 1 |
352-3381 Oem Ar-Mobile Hyd Power Unit
| 18***60 | Guard Group-Track Guide; -Full Length | 1 |
| 23***71 | Alarm Group-Travel; -Backup | 1 |
| 24***69 | Air Cleaner Ar; -Precleaner | 1 |
354-7372 Option Ar-Machine
| 22***79 | Air Conditioner Ar | 1 |
| 23***52 | Roller Ar-Track & Carrier | 1 |
| 24***35 | Guard Group-Travel Motor; -Heavy-Duty | 1 |
356-2119 Option Ar-Machine
| 13***87 | Guard Group-Swivel; (Swivel) | 1 |
| 22***79 | Air Conditioner Ar | 1 |
| 23***52 | Roller Ar-Track & Carrier | 1 |
354-7369 Special Ar-Oem
| 19***76 | Power Train Ar | 1 |
| 22***61 | Electronics Group-Monitor | 1 |
| 26***11 | Engine Ar | 1 |
352-3379 Special Ar-Oem
| 19***76 | Power Train Ar | 1 |
| 22***61 | Electronics Group-Monitor | 1 |
| 26***11 | Engine Ar | 1 |
Operator Station
229-9080 Air Conditioner & Mounting Gp
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 2 |
| 11***36 | Clip | 3 |
| 22***80 | Air Conditioner & Mounting Group | 1 |
229-9079 Air Conditioner Ar
| 18***00 | Screw-Tapping | 35 |
| 18***02 | Screw As; (Tapping) | 3 |
| 22***79 | Air Conditioner Ar | 1 |
316-8917 Air Conditioner Gp
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 18***86 | Screw-Machine; (M4x0.7x8-mm) | 2 |
| 23***51 | Support As | 1 |
229-9081 Air Conditioner Gp
| 18***00 | Screw-Tapping | 35 |
| 18***02 | Screw As; (Tapping) | 3 |
| 22***81 | Air Conditioner Group | 1 |
259-7346 Armrest Gp -Rh
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 18***86 | Screw-Machine; (M4x0.7x8-mm) | 2 |
| 23***52 | Support As | 1 |
259-7347 Armrest Gp -Lh
| 25***47 | Armrest Group; -Lh | 1 |
| 2U***52 | Lockwasher From 5wd169 - Up And Field Installed | 5 |
| 6V***83 | Bolt (16mm Long); (M6x1x16-mm) | 3 |
259-7295 Bracket Gp-Mirror
| 25***95 | Bracket Group-Mirror | 1 |
| 2U***52 | Lockwasher From 5wd169 - Up And Field Installed | 5 |
| 6V***83 | Bolt (16mm Long); (M6x1x16-mm) | 3 |
346-7375 Bracket Gp-Mirror
| 09***72 | Screw-Machine; (M4x0.7x16-mm) | 12 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 8 |
| 10***80 | Bolt-Socket Head; (M6x1x45-mm) | 2 |
265-5440 Cab Gp -Interior
| 10***08 | Bumper; (Conical) | 2 |
| 11***27 | Screw-Machine; (M6x1x30-mm) | 2 |
| 11***53 | Screw-Special | 1 |
280-0436 Cab Gp -Demolition
| 28***36 | Cab Group; -Demolition | 1 |
| 32***74 | Camera Ar; -Work Area Visual System, Rear | 1 |
| 33***54 | Mirror Group | 1 |
265-6462 Cab Gp -Exterior
| 22***13 | Monitor & Mtg Group-Operator | 1 |
| 24***64 | Trim Group-Cab; -Interior, Front | 1 |
| 25***49 | Guard Group-Overhead; -Demolition | 1 |
329-6573 Camera & Mirror Ar
| 12***36 | Seal-O-Ring (Id=13.4mm); (Id=13.40mm) | 1 |
| 12***38 | Seal-O-Ring (Id=6.7mm); (Id=6.70mm) | 1 |
| 24***37 | Valve As-Expansion | 1 |
245-7836 Coil Gp-Evaporator
| 13***89 | Clip; (Ladder) | 2 |
| 24***36 | Coil Group-Evaporator | 1 |
| 25***92 | Bolt; (M8x1.25x80-mm) | 2 |
276-3814 Compressor Gp-Refrigerant
| 24***42 | Bracket As | 1 |
| 24***43 | Bracket As | 1 |
| 27***14 | Compressor Group-Refrigerant; (Refrigerant) | 1 |
245-7940 Condenser & Mtg Gp-Refrigerant
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***00 | Nut-Flange; (M8x1.25-Thd) | 4 |
| 22***46 | Bolt As | 8 |
334-6569 Condenser Gp-Refrigerant
| 12***17 | Guard | 2 |
| 17***16 | Grommet | 2 |
| 17***22 | Grommet | 2 |
259-7349 Console Gp-Operator -Lh
| 25***49 | Console Group-Operator; -Lh | 1 |
| 29***38 | Control Group-Pilot Operated Hydraulic; -Rh | 1 |
| 29***39 | Control Group-Pilot Operated Hydraulic; -Lh | 1 |
259-7348 Console Gp-Operator -Rh
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 5 |
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 23***79 | Nut-Speed | 6 |
245-7922 Console Gp-Operator
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 4 |
| 18***84 | Cover | 1 |
| 23***79 | Nut-Speed | 2 |
270-5689 Control & Mtg Gp-Joystick -2-Button, Slide, Trigger Sw
| 11***83 | Pin-Spring | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 6 |
| 24***93 | Receptacle As-Connector; (6-Pin) | 1 |
260-2110 Control Gp-Handle -Joystick, Lh
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 6 |
| 24***93 | Receptacle As-Connector; (6-Pin) | 1 |
| 26***10 | Control Group-Handle; -Joystick, Lh | 1 |
297-4590 Control Gp-Handle -Lh
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 2 |
| 12***73 | Pin | 1 |
| 13***74 | Pedal-Rubber | 1 |
260-2109 Control Gp-Handle -Joystick, Rh
| 11***83 | Pin-Spring | 1 |
| 26***09 | Control Group-Handle; -Joystick, Rh | 1 |
| 26***11 | Lever | 1 |
275-7648 Control Gp-Hydraulic Pedal -Lh
| 09***28 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 11***49 | Pedal Assem.; (L.H.) | 1 |
259-7179 Control Gp-Hydraulic Pedal
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 2 |
| 12***65 | Pedal-Rubber; (Lh) | 1 |
| 12***73 | Pin | 1 |
297-0538 Control Gp-Pilot Operated Hyd -Rh
| 26***10 | Control Group-Handle; -Joystick, Lh | 1 |
| 29***31 | Valve Group-Pilot; -Joystick, Lh | 1 |
| 29***38 | Control Group-Pilot Operated Hydraulic; -Rh | 1 |
170-9497 Control Gp-Pilot Operated Hyd -Travel
| 17***97 | Control Group-Pilot Operated Hydraulic; -Travel | 1 |
| 26***09 | Control Group-Handle; -Joystick, Rh | 1 |
| 29***30 | Valve Group-Pilot; -Joystick, Rh | 1 |
297-0539 Control Gp-Pilot Operated Hyd -Lh
| 23***99 | Cover As | 1 |
| 23***02 | Cover-Access; (Fuse-Rear Panel) | 1 |
| 23***93 | Fastener | 2 |
234-6501 Cover Gp-Cab -Rear
| 15***43 | Cover | 1 |
| 15***44 | Cover | 1 |
| 17***42 | Cover | 1 |
249-0530 Cover Gp-Cab -Exterior, Lh
| 24***30 | Cover Group-Cab; -Exterior, Lh | 1 |
| 30***40 | Cover | 1 |
| 7X***29 | Washer; (11x25x3-mm Thk) | 3 |
269-2544 Cover Gp-Cab Riser
| 26***44 | Cover Group-Cab Riser | 1 |
234-6500 Cover Gp-Storage -Cab, Rear
| 15***67 | Door As | 1 |
| 15***77 | Hinge | 2 |
| 23***00 | Cover Group-Storage; -Cab, Rear | 1 |
265-5365 Door Gp-Cab
| 17***96 | Clip | 3 |
| 23***76 | Duct As; (Fresh Air, Upper) | 1 |
| 23***77 | Duct As; (Vent, Rear) | 1 |
265-5364 Door Gp-Cab
| 11***38 | Screw; (M6x1x20-mm) | 4 |
| 15***97 | Clip | 45 |
| 15***71 | Glass | 1 |
229-9082 Duct Gp-Cab Air
| 19***53 | Guard As | 1 |
| 21***05 | Film; (Warning) (No Weld/ No Drill) (Rearward Of Rh Cab Door) | 1 |
| 22***05 | Spacer; (18x38x40-mm Thk) | 2 |
259-8749 Guard Gp-Overhead -Demolition
| 09***82 | Nut Self-Locking; (M8x1.25 Thd) | 2 |
| 11***24 | Spring As; (Gas) | 2 |
| 14***18 | Spacer; (13.5x30x10-mm Thk) | 2 |
253-9224 Guard Gp-Window
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 23***11 | Plug As-Connector; (2-Pin) | 1 |
| 25***24 | Guard Group-Window | 1 |
277-9100 Horn Gp-Electric -24-Volt, High Tone
| 18***00 | Screw-Tapping | 6 |
| 19***66 | Relay; (Compressor Clutch) | 4 |
| 24***13 | Motor As | 1 |
245-7812 Housing Gp-Air Conditioner -Inlet Air
| 24***12 | Housing Group-Air Conditioner; -Inlet Air | 1 |
| 24***95 | Kit-Clip; (Includes 28-Clips) | 1 |
| 32***46 | Kit-Cylinder; (Dampener)(Dampener) | 1 |
251-0538 Radio Gp -Am/Fm
| 25***38 | Installation Group-Radio | 1 |
| 33***08 | Software Group-Communication; (Product Link 121sr) | 1 |
333-4157 Kit-Seat Suspension -Air
| 15***42 | Lever As | 1 |
| 16***64 | Bracket | 1 |
| 17***41 | Pin | 1 |
164-0528 Lever Gp-Cab Door
| 11***45 | Guard | 1 |
| 12***36 | Seal-O-Ring (Id=13.4mm); (Id=13.40mm) | 1 |
| 12***38 | Seal-O-Ring (Id=6.7mm); (Id=6.70mm) | 1 |
283-8358 Lines Gp-Air Conditioner
| 09***45 | Cable; (Lanyard) | 1 |
| 28***58 | Lines Group-Air Conditioner | 1 |
| 5P***58 | Sleeve; (Cable Splice) | 2 |
261-5161 Lines Gp-Air Conditioner -Tilt Cab
| 10***73 | Clip | 5 |
| 12***98 | Bracket Assem. | 1 |
| 12***36 | Seal-O-Ring (Id=13.4mm); (Id=13.40mm) | 1 |
7y-0059 Literature Gp
| 33***62 | Mirror Group-Down View; -Fuel Tank, Rh | 1 |
| 33***69 | Fender & Cover Group | 1 |
| 7Y***59 | Literature Group | 1 |
330-1354 Mirror Gp
| 13***75 | Bolt As-Locking; (M12x1.75x30-mm)(M12x1.75x30-mm)) | 3 |
| 32***25 | Tube As | 1 |
| 32***62 | Mirror Group-Rear View | 1 |
330-1162 Mirror Gp-Down View -Fuel Tank, Rh
| 13***70 | Mirror | 1 |
| 25***96 | Support As | 1 |
| 32***97 | Bar As | 1 |
332-1729 Mirror Gp-Rear View -With Front Guard
| 32***50 | Mirror Group-Rear View | 1 |
| 33***29 | Mirror Group-Rear View; -With Front Guard | 1 |
| 34***75 | Bracket Group-Mirror | 1 |
255-2715 Mirror Gp-Rear View -Exterior, Front, Rh
| 25***15 | Mirror Group-Rear View; -Exterior, Front, Rh | 1 |
| 8T***69 | Bolt-Socket Hd; (M6 X 1.0 X 20) | 2 |
| 9X***56 | Washer; (6.6x12x2-mm Thk) | 2 |
327-6550 Mirror Gp-Rear View
| 25***95 | Bracket Group-Mirror | 1 |
| 32***50 | Mirror Group-Rear View | 2 |
| 8T***40 | Bolt-Plt; (M16 X 2.0 X 60) | 1 |
221-8813 Monitor & Mtg Gp-Operator
| 14***36 | Pin-Connector; (14-Ga To 18-Ga) | 17 |
| 22***13 | Monitor & Mtg Group-Operator | 1 |
| 24***94 | Receptacle As-Connector; (12-Pin) | 1 |
349-5408 Monitor Gp-Operator
| 34***08 | Monitor Group-Operator | 1 |
327-7482 Monitor Gp-Operator
| 32***82 | Monitor Group-Operator | 2 |
| 34***10 | Software Group-Monitor | 1 |
277-9130 Motor Gp-Window Wiper
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
| 19***10 | Cap-Wiper | 2 |
330-5054 Motor Gp-Window Wiper
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 7 |
| 16***74 | Louver As-Vent | 2 |
| 23***72 | Cover | 1 |
225-5765 Mounting Gp-Cab -Rear
| 05***71 | Grommet-Junction Box | 1 |
| 09***41 | Screw; (Machine) (M6x1thd) | 4 |
| 11***29 | Washer; (6.6x22x2-mm Thk) | 4 |
309-4886 Mounting Gp-Monitor -Machine Stability
| 23***62 | Mount As | 4 |
| 25***10 | Floor Mat | 1 |
| 30***86 | Mounting Group-Monitor; -Machine Stability | 1 |
245-7811 Mounting Gp-Platform
| 17***97 | Control Group-Pilot Operated Hydraulic; -Travel | 1 |
| 22***65 | Mounting Group-Cab; -Rear | 1 |
| 24***11 | Mounting Group-Platform | 1 |
284-2246 Operator Ar
| 17***97 | Control Group-Pilot Operated Hydraulic; -Travel | 1 |
| 22***65 | Mounting Group-Cab; -Rear | 1 |
| 24***22 | Console Group-Operator | 1 |
359-3472 Operator Ar
| 25***26 | Fastener Group-Wiring Harness; -Straight Travel | 1 |
| 25***43 | Lines Group-Pilot; -Third Pedal, Pilot Valve | 1 |
| 25***44 | Lines Group-Pilot; -Control Valve, Travel Valve | 1 |
259-7176 Pedal Ar-Auxiliary -Third Pedal, Straight Travel
| 25***26 | Fastener Group-Wiring Harness; -Straight Travel | 1 |
| 25***43 | Lines Group-Pilot; -Third Pedal, Pilot Valve | 1 |
| 25***76 | Pedal Ar-Auxiliary; -Third Pedal, Straight Travel | 1 |
356-2349 Pedal Ar-Third -Straight Travel
| 08***97 | Washer; (13x50x6-mm Thk) | 2 |
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
| 09***33 | Seal Stk Link, Bkt Link & Cyl | 4 |
259-2801 Platform Gp-Cab Tilt
| 13***65 | Grommet | 1 |
| 13***66 | Grommet | 1 |
| 16***49 | Cover | 2 |
263-6277 Platform Gp-Operator
| 10***04 | Screw As; (M5x0.8x10-mm) | 2 |
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 2 |
| 23***60 | Cable | 1 |
336-3545 Radio Gp-Communication -Product Link 121sr
| 16***42 | Connector; (Receptacle) | 1 |
| 16***43 | Terminal; (Male) | 4 |
| 23***11 | Switch As-Rocker; (Heated Seat) | 1 |
263-9088 Radio Gp-Communication -Product Link 121sr
| 26***88 | Radio Group-Communication; -Product Link 121sr | 1 |
| 33***66 | Software Group-Communication; (Product Link 121sr) | 1 |
327-6503 Seat & Mounting Gp -High Back, With Heater
| 32***03 | Seat & Mounting Group; -High Back, With Heater | 1 |
| 32***41 | Seat Belt Group; (Retractable, 43-mm) | 1 |
305-0467 Seat Belt Gp -Retractable, 43-Mm
| 17***59 | Handle; (Lumbar Support Adjuster) | 1 |
| 30***67 | Seat Belt Group; -Retractable, 43-mm | 1 |
| 31***87 | Bracket | 2 |
327-6513 Seat Gp -High Back, With Heater
| 31***87 | Bracket | 2 |
| 32***13 | Seat Group; -High Back, With Heater | 2 |
| 32***21 | Suspension Group-Seat; -Air | 1 |
327-6509 Seat Gp-Suspension -High Back, With Heater
| 32***09 | Seat Group-Suspension; -High Back, With Heater | 1 |
| 32***38 | Support As-Seat | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
327-6523 Support Gp-Seat
| 32***23 | Support Group-Seat | 1 |
| 32***44 | Kit-Bracket; (Console Raise, Lower) | 1 |
| 32***48 | Kit-Adjuster; (Seat Position) | 1 |
327-6521 Suspension Gp-Seat -Air
| 18***57 | Angle As | 1 |
| 18***60 | Rod | 1 |
| 32***21 | Suspension Group-Seat; -Air | 1 |
284-3877 Tank Gp-Window Washer
| 23***33 | Wiper Group-Window; -Front Window, 1-Piece | 1 |
| 24***11 | Mounting Group-Platform | 1 |
| 25***01 | Platform Group-Cab Tilt | 1 |
355-5672 Tilt Ar-Cab
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 8 |
| 16***46 | Cup | 1 |
| 16***55 | Panel-Switch; (Operator Console) | 1 |
249-2664 Trim Gp-Cab -Interior, Front
| 09***80 | Tape - Color; (Blue) | 1 |
| 09***82 | Tape-Color; (Yellow) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
355-8754 Washer Gp-Window
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 1 |
| 16***83 | Bracket | 8 |
| 19***57 | Bracket | 2 |
274-5098 Washer Gp-Window
| 09***80 | Tape - Color; (Blue) | 2 |
| 09***82 | Tape-Color; (Yellow) | 2 |
| 14***95 | Hose; (650-cm Each) | 0 |
265-5458 Window Gp-Cab -Rear, Side, Top Windows
| 26***58 | Window Group-Cab; -Rear, Side, Top Windows | 1 |
| 28***62 | Frame | 1 |
| 28***63 | Seal | 1 |
260-1735 Window Gp-Cab -High Resistant Glass
| 10***89 | Rivet-Pop | 2 |
| 13***14 | Hammer Group | 1 |
| 14***97 | Strip | 1 |
286-8861 Window Gp-Door
| 14***95 | Hose; (650-cm Each) | 0 |
| 19***18 | Blade As-Wiper; (Twin Blade) | 1 |
| 21***56 | Fitting | 1 |
259-8891 Wiper Gp-Window -Top
| 01***16 | Setscrew; (8-32x0.5-In) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
239-3433 Wiper Gp-Window -Front Window, 1-Piece
| 01***16 | Setscrew; (8-32x0.5-In) | 1 |
| 12***95 | Plug | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
Power Train
353-0499 Drive Gp-Final -With Motor, Sprocket
| 09***31 | Ring - Retaining | 1 |
| 09***77 | Plate (7.0 mm Thick) | 1 |
| 09***78 | Plate (8.0 mm Thick) | 1 |
296-6217 Final Drive Gp -With Motor
| 09***91 | Screw-Machine; (M5x0.8x35-mm) | 2 |
| 11***26 | Housing-Plug | 1 |
| 11***28 | Seal | 2 |
296-6218 Drive Gp-Final -Without Motor
| 19***06 | Motor & Mtg Group-Travel | 1 |
| 29***18 | Final Drive Group; -Without Motor | 2 |
191-2576 Power Train Ar
| 16***27 | Sprocket Group | 2 |
| 19***76 | Power Train Ar | 1 |
| 19***77 | Fastener Group-Swing & Final Dr | 1 |
168-6727 Sprocket Gp
| 16***27 | Sprocket Group | 1 |
| 6Y***85 | Sprocket; (Track) | 1 |
| 7X***75 | Bolt; (M24x3x60-mm) | 16 |
Service Equipment And Supplies
268-6816 Film Gp -Quick Coupler
| 22***30 | Film-Warning; (Flying Debris, Stay Back, U.S.) | 1 |
| 22***31 | Film-Warning; (Flying Debris, Stay Back, Intl) | 1 |
| 26***16 | Film Group; -Quick Coupler | 1 |
247-7410 Film Gp -Operator Controls, Notice
| 24***10 | Film Group; -Operator Controls, Notice | 1 |
| 26***17 | Film-Identification; (Quick Coupler) | 1 |
303-2787 Film Gp -Work Area Visual System, Rear
| 13***58 | Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap) | 1 |
| 14***47 | Film; (Identification) (24v) (On Outside Of Battery Compartment Door) | 1 |
| 16***70 | Film; (No Step) | 1 |
298-4341 Film Gp -Smartboom
| 29***41 | Film Group; -Smartboom | 1 |
| 31***52 | Film-Instruction; (Battery Life, Camera) | 1 |
275-3812 Film Gp -Fan, Flying Debris
| 14***93 | Film-Instruction; (Variable Track Gauge) | 1 |
| 27***12 | Film Group; -Fan, Flying Debris | 1 |
298-4258 Film Gp -Fuel Transfer Pump
| 23***63 | Film-Identification; (Smartboom) | 1 |
| 26***44 | Film-Warning; (Boom Float) | 1 |
| 29***58 | Film Group; -Fuel Transfer Pump | 1 |
285-8547 Film Gp -Adj Gauge Undercarriage
| 28***47 | Film Group; -Adj Gauge Undercarriage | 1 |
| 30***72 | Film-Warning; (Explosion Hazard, Read Omm) | 1 |
359-7480 Plate & Film Gp
| 35***80 | Plate & Film Group | 1 |
Undercarriage
297-9151 Adjustment Gp-Hydraulic Track
| 09***27 | Valve-Fill; (Track Tension Cylinder) | 1 |
| 11***24 | Plate As. | 1 |
| 11***25 | Plate | 1 |
352-3374 Frame Ar-Undercarriage
| 17***53 | Roller Ar-Track & Carrier | 1 |
| 19***02 | Guard Group-Track Guide; -Center | 1 |
| 23***20 | Idler Group-Front | 1 |
283-1422 Frame Ar-Undercarriage
| 17***53 | Roller Ar-Track & Carrier | 1 |
| 19***02 | Guard Group-Track Guide; -Center | 1 |
| 23***20 | Idler Group-Front | 1 |
270-3146 Frame Gp-Carbody -Adjustable Gauge
| 15***06 | Bolt-Hex Socket; (M10x1.5x25mm) | 160 |
| 25***68 | Block | 2 |
| 27***45 | Frame As-Carbody | 1 |
270-4785 Frame Gp-Track Roller -Adjustable Gauge, Rh
| 11***72 | Bracket | 2 |
| 15***06 | Bolt-Hex Socket; (M10x1.5x25mm) | 80 |
| 27***83 | Frame As-Track Roller; (Adjustable Gauge, Rh) | 1 |
270-4786 Frame Gp-Track Roller -Adjustable Gauge, Lh
| 11***72 | Bracket | 2 |
| 15***06 | Bolt-Hex Socket; (M10x1.5x25mm) | 80 |
| 27***84 | Frame As-Track Roller; (Adjustable Gauge, Lh)(Lh) | 1 |
270-3147 Frame Gp-Undercarriage -Adjustable Gauge Undercarriage
| 11***96 | Pin As | 4 |
| 12***21 | Cylinder Group-Undercarriage; -Adjustable Gauge | 2 |
| 27***46 | Frame Group-Carbody; -Adjustable Gauge | 1 |
192-8302 Guard Gp-Track Guide -Center
| 19***02 | Guard Group-Track Guide; -Center | 1 |
| 19***03 | Guard As-Track Guide | 2 |
| 8T***67 | Washer-Hard; (26x44x4-mm Thk) | 8 |
270-3149 Guard Gp-Track Guide -Adjustable Gauge Undercarriage
| 14***94 | Cover As | 2 |
| 27***26 | Plate | 4 |
| 27***28 | Plate As | 2 |
189-3860 Guard Gp-Track Guide -Full Length
| 10***24 | Support As | 16 |
| 14***48 | Bolt-Hex Head; (M24x3x350mm) | 16 |
| 18***60 | Guard Group-Track Guide; -Full Length | 1 |
241-7333 Guard Gp-Travel Motor
| 24***33 | Guard Group-Travel Motor | 1 |
| 24***34 | Plate | 2 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 10 |
241-7335 Guard Gp-Travel Motor -Heavy-Duty
| 24***35 | Guard Group-Travel Motor; -Heavy-Duty | 1 |
| 24***36 | Cover As-Access; (Lh) | 1 |
| 24***37 | Cover As-Access; (Rh) | 1 |
239-4320 Idler Gp-Front
| 23***20 | Idler Group-Front | 1 |
| 23***21 | Idler Group-Front | 2 |
| 29***51 | Adjustment Group-Hydraulic Track | 2 |
136-2422 Idler Gp-Front
| 10***81 | Seal Group-Duo-Cone | 2 |
| 11***99 | Bearing; (Front Idler) | 2 |
| 13***22 | Idler Group-Front | 1 |
239-4321 Idler Gp-Front
| 13***22 | Idler Group-Front | 1 |
| 23***21 | Idler Group-Front | 1 |
| 23***22 | Spring Group-Recoil | 1 |
213-1971 Link As-Track -Grease Lubricated
| 17***26 | Seal; (Track) | 96 |
| 17***28 | Seal-Track Master | 2 |
| 20***28 | Bushing-Track Master | 1 |
201-9119 Link As-Track
| 09***44 | Pin; (Cotter) | 1 |
| 11***02 | Link-Track Master; (Rh) | 1 |
| 11***03 | Link-Track Master; (Lh) | 1 |
270-3148 Lock Gp-Transport -Adjustable Gauge Undercarriage
| 27***48 | Lock Group-Transport; -Adjustable Gauge Undercarriage | 1 |
| 27***71 | Plate | 2 |
| 5P***37 | Pin (Lock) | 2 |
176-4853 Roller Ar-Track & Carrier
| 17***53 | Roller Ar-Track & Carrier | 1 |
| 17***86 | Roller Group-Track-Single Flange | 18 |
| 6Y***23 | Roller Group-Track Carrier | 4 |
239-4352 Roller Ar-Track & Carrier
| 18***74 | Roller Group-Track-Single Flange | 18 |
| 23***52 | Roller Ar-Track & Carrier | 1 |
| 6Y***23 | Roller Group-Track Carrier | 4 |
6y-5323 Roller Gp-Track Carrier
| 17***92 | Seal Group-Duo-Cone | 1 |
| 1M***97 | Ring-Sealing | 1 |
| 5H***48 | Seal (Part Of 5d***19 Assem.) | 1 |
183-2874 Roller Gp-Track-Single Flange
| 14***33 | Seal Group-Duo Cone; (Duo Cone) (151page) | 2 |
| 16***31 | Ring; (Toric) | 2 |
| 17***97 | Collar; (Track Roller) | 2 |
179-1486 Roller Gp-Track-Single Flange
| 14***33 | Seal Group-Duo Cone; (Duo Cone) (151page) | 2 |
| 16***31 | Ring; (Toric) | 2 |
| 17***86 | Roller Group-Track-Single Flange | 1 |
239-4322 Spring Gp-Recoil
| 17***37 | Washer; (62x105x10-mm Thk) | 1 |
| 17***38 | Nut; (M56x5.5-Thd) | 1 |
| 17***40 | Strip | 1 |
347-2461 Track Gp -2-Required, Heavy-Duty
| 12***41 | Shoe-Track | 49 |
| 21***71 | Link As-Track; -Grease Lubricated | 1 |
| 31***50 | Nut-Track; (M22x1.5-Thd) | 196 |
347-2346 Track Gp -2-Required
| 12***40 | Shoe-Track | 49 |
| 21***71 | Link As-Track; -Grease Lubricated | 1 |
| 31***50 | Nut-Track; (M22x1.5-Thd) | 196 |
203-0860 Track Gp -2-Required
| 12***40 | Shoe-Track | 49 |
| 20***19 | Link As-Track; (Track) (15page) | 1 |
| 20***60 | Track Group; -2-Required, Heavy-Duty | 1 |
203-0861 Track Gp -2-Required, Heavy-Duty
| 12***41 | Shoe-Track | 49 |
| 20***19 | Link As-Track; (Track) (15page) | 1 |
| 20***61 | Track Group; -2-Required, Heavy-Duty | 1 |
336D L serial number reference
This is Cat's OEM Solutions Mobile Hydraulic Power Unit line built on the 336D / 336D L platform, not the excavator itself. Read the serial as a 3-character alphanumeric prefix identifying the arrangement (M3M for the base/skid unit, M3N for the demolition-conversion unit) followed by a sequential unit number, e.g. M3M00001 is the first unit of that arrangement. The base arrangement is a bare frame or skid with no operator cab, so its PIN plate sits on the frame or skid near the control panel or engine-mounting end rather than at an operator station. The demolition-conversion arrangement adds a cab with overhead and window guards, so check the cab structure for the plate on that variant. Match the prefix to the parts/service manual cover before ordering parts, since the base and demolition arrangements use separate documentation despite sharing one nameplate family.
| Prefix | Identifies | Notes |
|---|---|---|
| M3M | 336D & 336D L Mobile Hydraulic Power Unit, base arrangement | Primary S/N prefix for this OEM Solutions power unit, M3M00001-UP. Powered by the C9 engine. Covers the standard skid-mount power-unit configuration; bare frame without a cab. |
| M3N | 336D & 336D L Mobile Hydraulic Power Unit, demolition conversion arrangement | S/N M3N00001-UP. Same C9 engine family as M3M; assigned to the demolition-carrier conversion arrangement rather than a separate model. This arrangement adds a cab group with overhead guard and window guards, unlike the bare base/skid arrangement. |
Frequently asked questions
What engine does the Caterpillar 336D L OEM Solutions power unit use?
A Cat C9 ACERT inline six-cylinder turbocharged, air-to-air aftercooled diesel, rated around 200 kW (268 hp) net at 1800 rpm in the standard configuration. Since this is a bare carrier built for OEM integrators, the engine can be governed to a different setting to match the customer's pump duty, so treat this as the reference rating rather than a fixed figure for every build.
What is the operating weight of the 336D L OEM Solutions power unit?
Cat does not publish a single operating weight for this configuration. It ships as a bare carrier, engine, hydraulics, undercarriage, and cab, without a standard boom, stick, or bucket, so total in-service weight depends on the front attachment and any extra counterweight the OEM integrator adds. Ask your integrator or dealer for the finished-machine weight of a specific build.
What replaced the 336D L OEM Solutions power unit?
The 336D2 OEM carried the OEM Solutions concept forward once Cat's D2-generation excavator platform arrived, keeping the same basic formula: a C9-family engine, factory hydraulic pump and valve package, and a frontless carrier for integrators to fit their own boom and tool. It is the direct successor in this size class of Cat's frontless power-unit line.
What 336D L owners discuss
Is there much public owner or operator discussion of the 336D L OEM Solutions power unit specifically?
Not much, and that's expected. This isn't the digging excavator that shares the model number. It's a frontless carrier: engine, hydraulic pump and valve package, cab, and undercarriage, sold through the OEM Solutions channel to boom and demolition-tool integrators, mainly for the European demolition market. It has no retail or rental presence, gets built into a third party's finished machine, and often ends up badged under the integrator's own name. Most public commentary on "the 336D L" is really about the standard digging excavator and does not carry over to this carrier. What does carry over is anything tied to shared platform components: the C9 engine, the base hydraulic pump/valve package, and the tracked undercarriage, since those parts see wider use and wider reporting.
What engine quirks come up for the C9 ACERT platform this carrier uses?
The carrier runs the same C9 ACERT diesel as the mainline excavator, built to Tier 3-equivalent/EU Stage IIIA-equivalent emissions, no particulate filter at this tier. Across C9 ACERT applications generally, recurring complaints include fuel injectors wearing prematurely and causing black or white smoke with no fault code set; a spread of engine sensors that can drift and mask each other's symptoms, which pushes toward checking each sensor's actual output against spec with a multimeter rather than swapping parts on a guess; and piston ring/cylinder liner wear tied to soot loading and oil service intervals under sustained heavy load. A carrier running a hammer or shear near-continuously sits closer to sustained heavy load than typical dig-and-swing duty, so oil and fuel filter intervals are worth tightening rather than following a generic chart. Have your dealer verify injector and sensor readings against spec before condemning parts.
How does the hydraulic system behave under continuous demolition-tool duty (hammer, shear, pulverizer)?
The carrier keeps the excavator's base pump and valve package. The boom and tool-specific circuit is added by whichever integrator built the finished machine. On this hydraulic architecture generally, weak or slow function response often traces to a jammed or bypassing resolver/shuttle valve rather than the pump itself, since the resolver reads the highest active-function pressure and signals the pump to stroke up. High case-drain flow points to internal wear in a motor or pump section. Because the front end is a bolt-on addition, a hydraulic fault showing up after commissioning is as likely to sit in the integrator's added plumbing and interface valve as in the factory pump/valve package. Isolate the two circuits before assuming a base-machine failure.
What undercarriage or wear pattern issues are typical for this kind of carrier?
It carries the standard 336D L tracked undercarriage, with sealed, lubricated track links meant to cut friction and keep debris out of the pin/bushing joints. On a demolition carrier, wear is driven less by digging loads and more by working on rubble and broken debris, swinging a heavy custom front through reach and side loads rather than a dig cycle. That shifts attention toward track tension and idler/roller condition rather than the bucket-and-linkage wear items owners of the standard excavator discuss. There isn't much published owner data specific to this low-volume application. General Cat tracked-carrier maintenance guidance, tension checks, greasing intervals, and debris clearing on rubble sites, is the best available reference.
What electrical or sensor issues come up, especially once an integrator has added its own control interface?
On ACERT-era Cat excavator platforms broadly, intermittent faults such as a no-engine-speed reading, spurious coolant or hydraulic temperature codes, or lost engine pre-checks often trace to corrosion or a loose pin at an ECM-to-cab harness connector rather than a bad sensor. A wiggle test on connectors while watching live sensor data is the standard first diagnostic step before replacing anything. On this carrier specifically, the boom/tool integrator's control system taps into or runs alongside the factory harness to manage the added front, so a fault that looks like an engine sensor problem can actually originate at the integrator's splice or interface module. Trace back to the OEM-added connection points before condemning the factory harness or ECM. Have your dealer or the original integrator verify wiring before replacing an ECM or sensor.
What should I check before buying a used 336D L OEM Solutions power unit?
Confirm the PIN/serial documentation actually identifies it as the OEM Solutions carrier rather than the standard digging excavator. Parts lookup and service literature differ, and a general listing may not distinguish them. Verify hours against ECM history rather than the hour meter alone, and confirm which emissions tier/EU stage the engine was built to, since that affects which markets it can legally run in. Inspect the base carrier, engine, hydraulic pump/valve package, swing system, undercarriage, separately from the integrator-installed boom/tool front and its hydraulic and electrical tie-ins, since the front end was built by a third party and quality varies by integrator. Ask for whatever build or commissioning paperwork exists naming the original integrator and intended tool package; these are low-volume, custom-built machines and resale documentation is often thin. Given how safety-critical a correctly rated boom/tool hydraulic interface is, have your dealer or a qualified integrator inspect and verify that interface before putting the machine to work.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Caterpillar 336D L. Related factory variants of the same model family:
336D L
Need a specific 336D L part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.