Caterpillaroem solutionsmobile hyd power unit
Caterpillar 336D
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 336D OEM Solutions Mobile Hydraulic Power Unit (MHPU) is a frontless carrier, not a standard excavator: Caterpillar builds it on the 336D and 336D L excavator undercarriage and house, powered by the Cat C9 ACERT turbocharged diesel (209 kW/280 hp gross, roughly 198-200 kW/266-268 hp net), but strips the boom, stick, bucket, and cab so the machine supplies hydraulic flow to a customer- or OEM-mounted work tool instead of digging on its own. Caterpillar offered it across both the base 336D and longer 336D L chassis under shared serial-prefix ranges, plus a separate 336 MHPU line under its own prefix. Operating weight for the bare power-unit build is not separately published; it runs lighter than the roughly 34,500-37,630 kg (76,035-82,962 lb) range published for the donor excavator chassis, since it carries no front linkage.
Within the D-series build, the main variation is chassis: the shared serial-prefix units cover both the plain 336D and long-frame 336D L configurations under one factory manual, while the separately documented 336 MHPU prefix line does not state a D-vs-L split or a confirmed engine. Caterpillar carried the MHPU concept forward into the following 336E platform, which swaps in the C9.3B engine, so this D-series build sits at the front of that OEM Solutions product line rather than as a one-off. In the used and parts market, this platform matters because it shares its engine, hydraulic pumps, undercarriage, and final drives with the far more common 336D/336D L excavator: a low-production MHPU still draws on a well-supported parts pool, even though MHPU-specific documentation and used listings stay scarce compared to the standard digging machine.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 336D specifications
Engine
| Engine model | Cat C9 ACERT, turbocharged, air-to-air aftercooled (ATAAC), inline-6 diesel. This is the confirmed base engine for the 336D / 336D L platform, including this Mobile Hydraulic Power Unit build. |
| Gross power (ISO 9249) | 209 kW (280 hp) |
| Net flywheel power | 198-200 kW (266-268 hp), SAE J1349 / ISO 9249 |
| Displacement | 8.8 L (537 cu in) |
| Cylinders | 6, inline |
| Bore x stroke | 114.3 mm x 149.9 mm (4.5 in x 5.9 in) |
| Emissions tier | U.S. EPA Tier 3 / EU Stage IIIA equivalent for this platform's build years |
Weights
| Operating weight, standard undercarriage (base excavator chassis) | approx. 34,500 kg (76,035 lb) |
| Operating weight, long/LC undercarriage or L configuration (base excavator chassis, max) | approx. 37,050-37,630 kg (81,761-82,962 lb) |
| Power-unit curb weight | Not separately published. This build carries no boom, stick, or bucket work group, so actual weight runs lighter than the excavator figures above. Confirm exact weight with a dealer quote for the specific build. |
Dimensions
| Height to top of cab | 3.14 m (10.31 ft) — upper structure only, applies without front linkage |
| Width over tracks | 3.39-3.41 m (11.13-11.2 ft) |
| Ground clearance | 0.45-0.46 m (1.48-1.5 ft) |
| Track gauge | 2.59 m (8.5 ft) |
| Length of track on ground | 4.04 m (13.26 ft) |
| Transport length and height with boom and stick (excavator work-group configuration) | length 11.2 m (36.8 ft), height 3.63-3.66 m (11.91-12 ft). This is the excavator front-linkage figure; it does not apply to the power-unit build, which has no boom or stick. |
Performance
| Hydraulic system maximum pressure, implement circuit | 35,000 kPa (5,076 psi) |
| Main pump flow, each pump | 265-280 L/min (70-74 gal/min) |
| Pilot system pressure | 4,000 kPa (580 psi) |
| Maximum travel speed | 5.0-5.15 km/h (3.1-3.2 mph) |
| Maximum drawbar pull | 300-301 kN (67,443-67,555 lb) |
| Work-tool performance (dig depth, reach, lift capacity) | Not applicable. This build carries no boom, stick, or bucket; dig/reach/lift figures published for the standard 336D excavator do not apply to this power-unit configuration and are omitted. |
Service capacities (summary)
| Fuel tank | 620 L (163.8 gal) |
| Hydraulic system, total incl. tank | 410 L (108.3-108.4 gal) |
| Hydraulic tank | 175 L (46.2 gal) |
| Engine oil | 40 L (10.6 gal) |
| Cooling system | 40 L (10.6 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
336D fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 40 L (10.6 US gal) | Cat DEO or Cat DEO-ULS diesel engine oil. Viscosity by ambient temperature: SAE 10W-30 for -18°C to 40°C (0°F to 104°F); SAE 15W-40 for -9.5°C to 50°C (15°F to 122°F); SAE 5W-40 for a wider cold-weather range down to about -30°C (-22°F). |
| Cooling system | 40 L (10.6 US gal) | Cat ELC (Extended Life Coolant), premixed 1:1 with water. Freeze protection to about -37°C (-34°F). No supplemental coolant additive needed; extended drain interval, roughly 12,000 hours or 6 years (up to 20,000 hours with ELC Advanced). |
| Fuel tank | 620 L (163.8 US gal) | Ultra-low sulfur No. 2-D diesel meeting Cat's diesel fuel spec for the C9 ACERT engine; No. 1-D or a winter blend for cold climates. |
| Final drive, each | 8 L (2.2 US gal) | Cat TDTO (Transmission/Drive Train Oil), TO-4 spec. Grade by climate: SAE 30 TDTO where summer highs stay under about 27°C (80°F); SAE 50 TDTO for hotter climates; Cat TDTO-TMS synthetic multigrade covers a wider -20°C to 40°C (-4°F to 104°F) band without seasonal changes. |
| Hydraulic tank | 175 L (46.2 US gal) | Cat HYDO Advanced multigrade hydraulic oil. Grade by climate: HYDO Advanced 10 for -20°C to 40°C (-4°F to 104°F); heavier HYDO Advanced 30 or 46 for consistently warm climates. Cat Bio HYDO Advanced is the biodegradable option where required. |
| Hydraulic system, total (tank, lines, cylinders) | 410 L (108.4 US gal) | Same Cat HYDO Advanced spec as the tank fill; this is the full wetted-system volume, not a separate fill point. |
| Grease (spec only) | Not capacity-specified; service-interval fitting item | Cat Advanced 3Moly multipurpose extreme-pressure grease for standard service; Cat Advanced Green Grease or other Cat Extreme Application grease variants for specific climate or duty conditions. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 336D maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
| Every 12,000 h |
|
Servicing the 336D beyond the schedule
Predictive Maintenance & Fluid Analysis
Run S·O·S sampling on engine oil, hydraulic oil, and final drive oil across this platform's C9 ACERT and 410 L (108.3 gal) hydraulic system. Trend data catches injector wear before power loss shows up, and flags a weakening main pump before response goes sluggish. Watch coolant temperature: reports on this chassis show climbs toward 98-104°C (208-219°F) within an hour, usually traced to a clogged radiator or hydraulic oil cooler core, not an internal fault. With no boom or stick to monitor, engine and pump trend data carries the diagnostic weight.
Corrective & Common Repairs
Injector seal leaks are a common wear item on this C9 ACERT: watch for a diesel smell and falling fuel economy as seals harden with age. Weak hydraulic response that firms up once a second function engages usually traces to a sticking resolver (shuttle) valve, not a worn pump — check signal lines first. Faulty sensors are common on ACERT-era wiring; verify readings with a multimeter before condemning the part. Harness insulation near the engine and pump compartment can go brittle enough to short against bare metal.
Overhaul & Rebuild Points
Undercarriage wear drives most rebuild decisions on this chassis class: watch for shoe separation, bent or cracked final-drive sprockets, and worn pin-bushing joints under heavy duty. On the travel motor, case-drain flow above roughly one liter per minute (0.26 gal/min) signals a worn rotating group — rule out a failed drain-line seal first, since it can mimic the symptom. Piston-ring wear and cylinder-liner scoring show up on the C9 under sustained heavy load over long service life, tied more to lubrication upkeep and soot buildup than a design flaw.
Seasonal & Environment Servicing
This platform sees marine, dredging, and quarry duty, where Caterpillar documents a biodegradable Cat Bio HYDO Advanced option for the 175 L (46.2 gal) hydraulic tank alongside the standard HYDO Advanced fill. Match viscosity grade to climate: engine oil and TDTO final-drive fluid carry separate cold- and hot-weather grades, and Cat ELC coolant holds freeze protection to about -37°C (-34°F) without an additive. In dusty quarry or demolition settings, check the radiator and hydraulic oil cooler for packed debris — a clogged core is a repeat cause of coolant-temperature climbs.
336D common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 220-8678 | Seal-Ring | Fuel system service | Check fitment → |
| 326-1644 | Filter As-Water Sep & Fuel | Fuel system service | Check fitment → |
| 289-6766 | Liner, Fuel Filter Head | Fuel system service | Check fitment → |
| 1R-0762 | Filter As-Fuel | Fuel system service | Check fitment → |
| 142-1339 | Filter Element As-Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
336D fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| CID 0100-03 | Engine oil pressure sensor circuit reads voltage above normal (open circuit or short to battery) | Damaged or corroded sensor connector, chafed harness wire shorted to a power circuit, or a failed oil pressure sensor | Inspect the oil pressure sensor connector and harness for damage or corrosion, verify sensor supply voltage at the connector, replace the sensor if wiring checks out good |
| CID 0110-00 | Engine coolant temperature reads valid but above the normal operating range | Low coolant level, restricted radiator or debris-packed cooling fins, fan drive fault, or a stuck thermostat | Check coolant level and condition first, inspect radiator and fan for blockage or fan-drive failure, confirm actual temperature with a second reading before condemning the sensor |
| CID 0111-04 | Engine coolant level sensor circuit reads voltage below normal (shorted low) | Coolant level below the sensor tip in the surge tank, damaged sensor wiring, or a failed level sensor | Check coolant level first and top off if low, inspect the sensor connector and harness for a short to ground, replace the sensor if the circuit tests bad |
| CID 0190-08 | Engine speed/timing sensor signal is an abnormal frequency, pulse width, or period | Incorrect sensor air gap, debris on the sensor tip, damaged sensor, or a harness fault on the speed/timing circuit | Inspect and reset sensor air gap, clean any metal debris from the sensor tip, check harness continuity, replace the sensor if the signal remains erratic |
| CID 0262-03 | 5-volt sensor supply circuit reads voltage above normal (open circuit or short to battery) | The shared sensor power-supply circuit shorted to a battery-voltage source, which can trigger multiple sensor codes at once | Note whether several sensor codes logged together, which points to the shared supply circuit rather than one sensor; inspect harness for chafing against a power wire, verify supply voltage at the ECM connector |
| CID 0001-05 | Cylinder #1 injector solenoid circuit reads current below normal (open circuit) | Open injector solenoid winding, a disconnected or corroded injector harness connector, or a broken wire in the injector harness | Inspect the injector connector for damage or corrosion, measure solenoid resistance against factory spec, repair the harness or replace the injector as needed |
| CID 2265-08 | Hydraulic pump outlet pressure sensor signal is an abnormal frequency, pulse width, or period | Faulty pressure sensor or damaged wiring on the main hydraulic pump outlet pressure circuit | Disconnect and inspect the sensor connector for corrosion, check the machine harness between the sensor and the ECM for damage, test the sensor signal per the diagnostic procedure and replace if needed |
| CID 0273-03 | Turbocharger outlet (boost) pressure sensor circuit reads voltage above normal (open circuit or short to battery) | Damaged boost sensor wiring, a corroded connector, or a failed sensor | Inspect the sensor connector and harness for damage or corrosion, verify sensor supply voltage, replace the sensor if the wiring checks out good |
| CID 0174-03 | Fuel temperature sensor circuit reads voltage above normal (open circuit or short to battery) | Damaged sensor wiring or connector, or a failed fuel temperature sensor | Inspect the connector and harness for damage or corrosion, check sensor resistance against factory spec, replace the sensor if faulty |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
336D attachments & work tools
Demolition & scrap shears
Fixed and rotating scrap/demolition shears are a primary work tool for this carrier class, cutting rebar, pipe, light structural steel and scrap. Jaw sizing on a 336-class carrier falls in the mid-size shear range built for roughly 30-40 tonne excavators; exact jaw opening and cutting force vary by shear model and configuration.
Grapples
Demolition/sorting grapples and orange-peel grapples handle concrete, rebar, wood, mixed debris or bulk scrap. Sized to match the mid-30s tonne carrier class; tine count and opening width vary by supplier and application.
Hydraulic hammers/breakers
Hydraulic breakers matched to a mid-30s tonne carrier (roughly 2-3.5 tonne breaker weight class, varies by brand) mount to this platform for concrete and rock demolition. These run on the high-pressure auxiliary circuit, separate from the standard digging (boom/stick/bucket) circuit.
Pulverizers & multi-processors
Concrete pulverizers and interchangeable-jaw multi-processor tools are offered in this size class for structural demolition, rebar separation and recycling work, sharing the same high-flow auxiliary circuit as shears.
Vibratory plate compactors
Vibratory compaction plates for soil, sand, gravel and asphalt attach through the same coupler and auxiliary circuit, used when the carrier is set up for trench/utility compaction rather than digging or demolition.
Quick coupler / mounting system
A pin-grabber style hydraulic quick coupler (roughly 90-100 mm pin diameter for this size class) is the standard mounting interface across the 330/336D/336E/336F excavator family that this platform shares. Locking uses a primary wedge plus a secondary mechanical latch and spring-loaded arms, giving redundancy if hydraulic pressure is lost.
Auxiliary hydraulic circuit / control kit
A high- or medium-pressure auxiliary control circuit is required to run shears, grapples, hammers, pulverizers and compactors, with in-cab selectable flow and pressure settings matched to the tool type. This is the same auxiliary circuit architecture used on the standard 336D excavator this power unit is built from.
MHPU base/carrier configuration
This job is a bare Mobile Hydraulic Power Unit (MHPU) built on the 336D/336D L platform, using the Cat C9 ACERT diesel - the same engine family used in the standard 336D excavator. Caterpillar OEM Solutions supplies it as an undercarriage-plus-power-unit core for integrators to fit with their own specialized front end or work tool, rather than as a complete digging excavator.
Typical OEM end-use segments
Caterpillar markets this class of mobile hydraulic power unit / frontless carrier platform to OEM integrators building machines for heavy and marine construction, dredging and coastal protection, quarry and aggregates, bulk material handling and demolition; the integrator supplies the mission-specific tool or superstructure rather than Cat.
Hydraulic fluid / filtration note
Factory documentation for this power unit covers a biodegradable hydraulic oil option along with a dedicated hydraulic system filter and pressure gauge for routine inspection, relevant where the OEM end-use calls for environmentally sensitive fluid such as marine or dredging work.
All 336D assemblies by section
Every catalogued assembly group for the Caterpillar 336D. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
239-6407 Air Cleaner & Mounting Gp
| 23***07 | Air Cleaner & Mounting Group | 1 |
| 32***49 | Air Cleaner Group | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
240-3769 Air Cleaner Ar -Precleaner
| 13***80 | Precleaner As; (Air) | 1 |
| 17***15 | Clamp | 1 |
| 24***69 | Air Cleaner Ar; -Precleaner | 1 |
239-6411 Air Cleaner Gp -With Precleaner
| 13***26 | Film-Instruction; (Top, Air Cleaner Cover) | 1 |
| 13***28 | Cover As | 1 |
| 13***29 | Valve-Dust; (Air Cleaner) | 1 |
255-2914 Air Cleaner Gp
| 13***26 | Film-Instruction; (Top, Air Cleaner Cover) | 1 |
| 14***39 | Filter Element As-Air; (Primary) | 1 |
| 14***04 | Filter Element As-Air; (Secondary) | 1 |
324-4149 Air Cleaner Gp
| 13***53 | Stud; (M8x1.25x82.75-mm)(M8x1.25x82.75-mm) | 2 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 22***09 | Elbow | 1 |
266-6190 Air Cleaner Gp
| 13***26 | Film-Instruction; (Top, Air Cleaner Cover) | 1 |
| 13***29 | Valve-Dust; (Air Cleaner) | 1 |
| 13***94 | Latch | 3 |
242-1934 Elbow Gp-Air Inlet
| 14***67 | Clamp; (Hose) | 12 |
| 23***66 | Hose | 1 |
| 23***33 | Hose | 1 |
239-6406 Lines Gp-Air -Air Cleaner To Turbocharger
| 11***15 | Stud-Taperlock; (M10x85-mm Oal) | 12 |
| 16***98 | Manifold-Exhaust | 1 |
| 16***11 | Gasket | 6 |
230-2898 Lines Gp-Air -Aftercooler To Turbocharger
| 23***98 | Lines Group-Cooling Air; -Aftercooler To Turbocharger | 1 |
| 25***66 | Indicator As-Air Filter Change; (Air Restriction) | 1 |
| 26***17 | Hose | 1 |
165-4444 Manifold Gp-Exhaust
| 11***08 | Clip | 1 |
| 13***47 | U-Bolt | 2 |
| 16***44 | Manifold Group-Exhaust | 1 |
266-6312 Muffler Gp
| 13***02 | Clamp As; (Turbine)(Turbine) | 1 |
| 16***63 | Clamp | 2 |
| 23***07 | Cartridge Group-Turbocharger | 1 |
258-8337 Turbocharger Gp
| 22***78 | Seal-Ring; (Fuel And Water Sep Filter) | 1 |
| 25***37 | Turbocharger Group | 1 |
| 32***44 | Filter As-Water Sep & Fuel; (Primary) | 1 |
250-7700 Turbocharger Gp
| 1P***51 | Gasket; (Turbocharger) | 1 |
| 25***00 | Turbocharger Group | 2 |
| 3E***17 | Locknut; (M10x1.5-Thd)(Spiralock) | 4 |
Basic Engine
242-0674 Camshaft Gp
| 10***94 | Plate-Thrust | 1 |
| 1B***05 | Key; (Woodruff) | 1 |
| 22***47 | Gear; (100-Teeth) | 1 |
202-3301 Cover Gp-Cylinder Block -Crankcase
| 20***01 | Cover Group-Cylinder Block; -Crankcase | 1 |
| 21***10 | Gasket | 1 |
| 21***11 | Cover; (Cylinder Block) | 1 |
127-5728 Cover Gp-Flywheel Housing
| 0S***89 | Bolt, Hex. Hd., 5/8"-11 N.C. X 1 3/4" | 3 |
| 12***28 | Cover Group-Flywheel Housing; (Flywheel Housing) | 1 |
| 4D***04 | Washer,Flat Cover Mtg,Accessory Drive | 3 |
211-3285 Cover Gp-Front Housing
| 06***55 | Seal-O-Ring (Id=47.22mm) | 1 |
| 12***57 | Washer; (10.85x19.3x1.27-mm Thk) | 2 |
| 13***22 | Stud | 2 |
118-1727 Cover Gp-Front Housing -Accessory Drive
| 11***27 | Cover Group-Front Housing; -Accessory Drive | 1 |
| 13***19 | Seal-Integral; (Integral) | 1 |
| 4W***26 | Cover | 1 |
235-8174 Cover Gp-Valve Mechanism
| 15***39 | Bearing-Main; (Standard) | 7 |
| 1B***05 | Key; (Woodruff) | 1 |
| 23***74 | Cover Group-Valve Mechanism | 1 |
164-6148 Crankshaft Gp
| 0L***26 | Plug -13mm(.512 In.) Outside Dia. | 2 |
| 16***48 | Crankshaft Group | 1 |
| 17***54 | Bolt-Hex Head; (M16x160mm) | 14 |
325-3915 Cylinder Block As
| 0S***19 | Plug-Cup | 1 |
| 1W***07 | Sleeve | 2 |
| 22***52 | Cylinder Block Group | 1 |
220-1952 Cylinder Block Gp
| 21***17 | Insert-Valve Seat; (Exhaust)(Standard) | 12 |
| 22***52 | Cylinder Block Group | 1 |
| 22***00 | Sleeve-Injector | 6 |
161-3406 Cylinder Block Gp
| 16***06 | Cylinder Block Group | 1 |
| 16***24 | Seal-Liner | 6 |
| 19***62 | Liner-Cylinder Block | 6 |
332-3619 Cylinder Head As
| 18***15 | Gasket Assem. | 1 |
| 25***39 | Cylinder Head Group | 1 |
| 2A***46 | Plug 9.80mm(.386in.)Outside Dia. | 1 |
311-7229 Cylinder Head As
| 21***17 | Insert-Valve Seat; (Exhaust)(Standard) | 12 |
| 22***00 | Sleeve-Injector | 6 |
| 24***88 | Insert-Valve Seat; (Inlet)(Standard) | 12 |
242-0672 Cylinder Head Gp
| 14***95 | Plug As | 2 |
| 16***78 | Seal-Valve Stem; (Exhaust) | 12 |
| 19***15 | Spring-Valve; (Inner) | 12 |
345-8414 Cylinder Head Gp
| 15***36 | Pulley-Crankshaft; (8-Groove) | 1 |
| 16***21 | Damper Assem. | 1 |
| 2W***81 | Plate-Clamp; (Pulley Clamp) | 1 |
344-2149 Cylinder Head Gp
| 18***15 | Gasket Assem. | 1 |
| 2A***46 | Plug 9.80mm(.386in.)Outside Dia. | 1 |
| 34***49 | Cylinder Head Group | 2 |
252-8439 Cylinder Head Gp
| 16***78 | Seal-Valve Stem; (Exhaust) | 12 |
| 19***15 | Spring-Valve; (Inner) | 12 |
| 19***17 | Spring-Valve; (Outer) | 12 |
165-4557 Damper & Pulley Gp
| 16***57 | Damper & Pulley Group | 1 |
| 18***94 | Belt-Serpentine | 1 |
| 18***49 | Support | 1 |
241-7605 Drive Gp-Accessory
| 09***24 | Ring; (Retaining) | 1 |
| 12***25 | Seal-O-Ring; (Id=11.89mm) | 1 |
| 13***46 | Shaft | 1 |
295-9439 Drive Gp-Fan
| 26***15 | Bolt-12 Point Head; (M16x2x180-mm) | 1 |
| 29***84 | Fastener Group-Cylinder Head | 26 |
| 29***39 | Drive Group-Fan | 1 |
213-4363 Fastener Gp-Cylinder Head
| 21***63 | Fastener Group-Cylinder Head | 1 |
| 22***21 | Spacer; (101.5x167x8-mm Thk) | 1 |
| 6V***49 | Bolt; (M10x1.5x50-mm) | 8 |
218-0859 Fastener Gp-Damper & Pulley
| 21***59 | Fastener Group-Damper & Pulley | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 6 |
| 6V***36 | Bolt; (M12x1.75x70-mm) | 6 |
116-4556 Fastener Gp-Front Housing
| 11***56 | Fastener Group-Front Housing; (Housing) | 1 |
| 8T***24 | Washer-To Assemble Valve As And Plates | 11 |
| 8T***12 | Bolt-Plt; (M8 X 1.25 X 50) | 11 |
236-7315 Fastener Gp-Valve Cover
| 23***15 | Fastener Group-Valve Cover | 1 |
| 24***00 | Spring | 9 |
| 8T***00 | Bolt (M8x1.25x60mm); (M8x1.25x60-mm) | 9 |
233-0423 Fastener Gp-Valve Cover Base
| 16***24 | Flywheel As | 1 |
| 23***23 | Fastener Group-Valve Cover Base | 1 |
| 4N***14 | Gear; (113-Teeth)(Flywheel Starter) | 1 |
102-3596 Flywheel Gp
| 10***96 | Flywheel Group | 1 |
| 11***69 | Plate-Thrust | 1 |
| 11***72 | Bearing | 1 |
205-1321 Gear Gp-Front
| 06***55 | Seal-O-Ring (Id=47.22mm) | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 20***21 | Gear Group-Front, Name-Plate (Norwegian) | 1 |
229-3568 Housing Gp-Flywheel
| 1U***46 | Sealant (For Locations A) | 0 |
| 22***68 | Housing Group-Flywheel | 1 |
| 24***59 | Housing-Front | 1 |
245-3260 Housing Gp-Front
| 16***85 | Plate-Lifting; (Rear) | 1 |
| 22***66 | Plate-Lifting; (Front) | 1 |
| 24***60 | Housing Group-Front | 1 |
191-3063 Lifting Gp-Engine
| 10***37 | Washer; (24.5x135x12-mm Thk) | 4 |
| 13***36 | Mount-Flexible | 2 |
| 13***37 | Mount-Flexible | 2 |
239-6474 Mounting Gp-Engine
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 2 |
| 13***03 | Plug As-Connector; (2-Pin) | 1 |
187-0472 Pan Gp-Oil -Engine
| 16***94 | Bearing; (Connecting Rod) | 1 |
| 16***97 | Bolt | 2 |
| 16***99 | Rod Assem. | 1 |
347-7908 Piston & Rod Gp
| 14***08 | Plug As. | 1 |
| 18***06 | Plug As; (High Temperature) | 2 |
| 34***08 | Piston & Rod Group | 1 |
265-1400 Piston & Rod Gp
| 16***94 | Bearing; (Connecting Rod) | 1 |
| 16***97 | Bolt | 2 |
| 16***99 | Rod Assem. | 1 |
279-7820 Plug Gp-Engine
| 16***47 | Rocker Arm As | 1 |
| 26***24 | Screw-Valve Adjustment; (M10x1.5-Thd) | 1 |
| 27***20 | Plug Group-Engine | 1 |
169-3105 Plug Gp-Engine
| 16***05 | Plug Group-Engine | 1 |
| 3J***90 | Plug Adapter Turbo Oil Supply; Plug-Adapter Turbo Oil Supply | 1 |
242-0329 Rocker Arm Gp -Inlet
| 20***19 | Bolt Assem.; (M6x1) | 9 |
| 24***29 | Rocker Arm Group; -Inlet | 1 |
| 24***39 | Seal-Crankshaft; (Front)(Front) | 1 |
213-9320 Rocker Arm Gp -Exhaust
| 21***20 | Rocker Arm Group; -Exhaust | 1 |
| 24***28 | Rocker Arm As | 1 |
| 26***24 | Screw-Valve Adjustment; (M10x1.5-Thd) | 1 |
178-3899 Seal Gp-Crankshaft
| 16***45 | Shaft As-Rocker Arm | 1 |
| 16***59 | Spring | 6 |
| 16***69 | Stand; (End) | 2 |
212-8926 Valve Mechanism Gp
| 16***37 | Lifter As-Valve | 12 |
| 21***26 | Valve Mechanism Group | 2 |
| 24***91 | Bridge-Valve | 6 |
242-0447 Valve Mechanism Gp
| 03***53 | Seal-O-Ring; (08.92mm Id) | 1 |
| 10***28 | Cover | 1 |
| 10***29 | Name-Plate (Lubrication), Adapter | 1 |
Cooling System
188-3826 Cooler Gp-Engine Oil
| 16***32 | Motor As; (Hydraulic Fan) | 1 |
| 16***34 | Resistor As; (Hydraulic Fan) | 1 |
| 16***99 | Nut-Flange; (M5x0.8-Thd) | 1 |
336-1156 Fan & Motor Gp
| 13***82 | Bolt; (M16x2x100-mm) | 2 |
| 14***70 | Adapter | 1 |
| 23***46 | Support As-Fan; (Lh) | 1 |
230-2899 Fan Gp-Suction
| 15***25 | Valve-Fluid Sampling | 1 |
| 15***70 | Cap-Dust; (Engine Coolant) | 1 |
| 19***57 | Gasket; (Water Regulator Housing)(Temperature) | 1 |
248-8835 Housing & Regulator Gp
| 15***25 | Valve-Fluid Sampling | 1 |
| 15***70 | Cap-Dust; (Engine Coolant) | 1 |
| 19***57 | Gasket; (Water Regulator Housing)(Temperature) | 1 |
348-4301 Housing & Regulator Gp
| 11***11 | Tee-O-Ring Port | 1 |
| 12***27 | Tee | 1 |
| 14***11 | Plug Group | 2 |
244-0989 Lines Gp-Turbocharger Water
| 20***34 | Plug-Cup; (73.38-mm Dia) | 2 |
| 24***89 | Lines Group-Turbocharger Water | 1 |
| 8T***61 | Plug; (Pipe) (1-11-1/2 Nptf Thd) | 1 |
205-4013 Plug Gp-Water Lines -Coolant
| 20***13 | Plug Group-Water Lines; -Coolant | 1 |
| 21***52 | Pump Group-Water | 1 |
| 2M***53 | Seal--To Seal Brake Housing To Main Housing | 1 |
219-4452 Pump Gp-Water
| 09***35 | Clamp | 1 |
| 14***67 | Clamp; (Hose) | 1 |
| 17***70 | Cap As; (Coolant Overflow) | 1 |
202-7674 Pump Gp-Water
| 14***88 | Seal As; (Water Pump) | 1 |
| 17***44 | Cover | 1 |
| 17***52 | Shaft As | 1 |
354-5104 Radiator & Hyd Oil Cooler Gp
| 25***14 | Air Cleaner Group | 1 |
| 35***04 | Radiator & Hydraulic Oil Cooler Group | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
230-2896 Radiator & Hyd Oil Cooler Gp
| 09***35 | Clamp | 1 |
| 14***67 | Clamp; (Hose) | 1 |
| 17***70 | Cap As; (Coolant Overflow) | 1 |
353-5542 Radiator & Hyd Oil Cooler Gp
| 26***53 | Radiator & Hydraulic Oil Cooler Group | 1 |
| 35***42 | Radiator & Hydraulic Oil Cooler Group | 2 |
265-3553 Radiator & Hyd Oil Cooler Gp
| 03***65 | Cap As-Radiator; (Sea Water Heat Exchanger) | 1 |
| 09***35 | Clamp | 3 |
| 1P***11 | Sleeve-Bracket To Hydraulic Core As | 3 |
Electrical And Starting System
132-1829 Alarm Gp -Fault
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***29 | Alarm Group; -Overload Warning | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
3e-6328 Alarm Gp -Cab Tilt, Warning
| 26***92 | Nut; (M5x0.8-Thd) | 1 |
| 29***57 | Stop | 1 |
| 29***58 | Lever | 1 |
231-1771 Alarm Gp-Travel -Backup
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 23***71 | Alarm Group-Travel; -Backup | 1 |
177-6972 Alternator Gp-Charging
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***72 | Alternator Group-Charging; (Charging) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
185-5294 Alternator Gp-Charging
| 12***96 | Pulley-Alternator | 1 |
| 18***94 | Alternator Group-Charging; -Waste Handling | 2 |
| 20***99 | Spacer | 1 |
251-0620 Battery & Wiring Gp -Cold Weather
| 18***38 | Collar | 2 |
| 18***39 | Fan As; (Alternator) | 1 |
| 18***42 | Stator Assem. | 1 |
306-8527 Battery & Wiring Gp
| 17***29 | Cable As | 1 |
| 1M***19 | Bolt; (5/16-18x1.375-In)(5/16-18x1.375 In) | 1 |
| 1M***20 | Nut-Battery Terminal (5/16-18 Thd); (5/16-18-Thd)(5/16-18x1.375 In) | 1 |
313-7833 Camera & Mounting Gp -Work Area Visual System, Rear
| 08***87 | Grommet | 1 |
| 09***35 | Spacer; (11x25x20-mm Thk) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 4 |
327-3329 Camera & Mounting Gp -Work Area Visual System, Rear
| 32***92 | Bracket As | 1 |
| 32***29 | Camera & Mounting Group; -Work Area Visual System, Rear | 1 |
| 33***84 | Camera Group; -Work Area Visual System, Rear | 1 |
354-2617 Camera Ar -Work Area Visual System, Rear
| 30***87 | Seal/O-Ring, Film Group; -Work Area Visual System, Rear, O Ring Seal, O-Ring | 1 |
| 30***21 | Wiring Group-Camera; -Work Area Visual System | 1 |
| 32***29 | Camera & Mounting Group; -Work Area Visual System, Rear | 1 |
329-6574 Camera Ar
| 31***33 | Camera & Mounting Group; -Work Area Visual System, Rear | 1 |
| 32***96 | Cover | 1 |
| 32***74 | Camera Ar; -Work Area Visual System, Rear | 1 |
336-6684 Camera Gp -Work Area Visual System, Rear
| 30***87 | Seal/O-Ring, Film Group; -Work Area Visual System, Rear, O Ring Seal, O-Ring | 1 |
| 32***29 | Camera & Mounting Group; -Work Area Visual System, Rear | 1 |
| 33***45 | Wiring Group-Cab; -Rear View, Camera | 1 |
332-2568 Control & Mtg Gp-Communication -Product Link 321sr
| 25***62 | Kit-Bracket; (Camera) | 1 |
| 33***68 | Control & Mtg Group-Communication; -Product Link 321sr | 1 |
253-4522 Control & Mtg Gp-Engine Elek
| 25***22 | Control & Mtg Group-Engine Elek | 1 |
| 26***42 | Bracket As | 1 |
| 26***21 | Electronics Group-Communication; -Product Link 300 | 1 |
283-9267 Control & Mtg Gp-Machine
| 22***74 | Control Group-Unprogrammed | 1 |
| 28***67 | Control & Mtg Group-Machine | 1 |
| 9X***80 | Bolt (45mm Long); (M6x1x45-mm) | 4 |
221-8872 Control & Mtg Gp-Machine
| 10***28 | Spacer-Special; (12.7x26x28.7-mm Thk) | 4 |
| 14***92 | Stud; (M8x1.25-Thd) | 2 |
| 22***72 | Control & Mtg Group-Machine | 1 |
262-1421 Electronics Gp-Communication -Product Link 300
| 22***72 | Control & Mtg Group-Machine | 1 |
| 26***21 | Electronics Group-Communication; -Product Link 300 | 1 |
| 27***74 | Panel & Mtg Group-Circuit Breaker | 1 |
297-4429 Electronics Gp-Machine -High Power
| 29***29 | Electronics Group-Machine; -High Power | 1 |
| 35***05 | Software Group-Communication | 1 |
| 35***64 | Service Group-Communication | 1 |
221-8861 Electronics Gp-Monitor
| 22***61 | Electronics Group-Monitor | 1 |
| 34***65 | Software Group-Machine | 1 |
| 34***66 | Service Group-Machine | 1 |
259-5237 Fastener Gp-Wiring Harness -Heavy Lift
| 11***18 | Clip | 1 |
| 25***37 | Fastener Group-Wiring Harness; -Heavy Lift | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 1 |
251-0526 Fastener Gp-Wiring Harness -Straight Travel
| 25***26 | Fastener Group-Wiring Harness; -Straight Travel | 1 |
| 34***08 | Monitor Group-Operator | 1 |
| 34***10 | Software Group-Monitor | 1 |
259-5295 Fastener Gp-Wiring Harness -Joystick
| 25***95 | Fastener Group-Wiring Harness; -Joystick | 1 |
| 7I***73 | Strap-Cable | 1 |
300-9417 Installation Ar-Communication -Product Link 321sr
| 30***17 | Installation Ar-Communication; -Product Link 321sr | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
320-5931 Installation Gp-Communication
| 23***40 | Film; (Warning) (Product Link, Ansi) (On Lh Front Post Inside Cab) | 1 |
| 23***41 | Film-Warning; (Product Link Radio, Intl) | 1 |
| 23***66 | Base-Mounting | 3 |
227-7581 Installation Gp-Security
| 22***81 | Installation Group-Security | 1 |
| 23***40 | Film; (Warning) (Product Link, Ansi) (On Lh Front Post Inside Cab) | 1 |
| 23***41 | Film-Warning; (Product Link Radio, Intl) | 1 |
167-3441 Lamp Gp-Flood
| 16***41 | Lamp Group-Flood; -Cab Guard-Cab | 1 |
| 17***93 | Cover | 1 |
| 17***17 | Lens As; (Floodlight) | 1 |
153-2523 Lamp Gp-Flood
| 15***23 | Lamp Group-Flood; -Horizontal Rh | 1 |
| 20***62 | Key As-Electronic; (Security) | 2 |
| 21***04 | Module Group-Interface; (Key)(Machine Security System) | 1 |
298-2323 Lighting Gp-Chassis -Front, Rh
| 29***23 | Lighting Group-Chassis; -Front, Rh | 1 |
| 9X***63 | Lamp-Halogen; (24-Volt, 70-Watt)(Floodlight) | 1 |
252-1242 Lighting Gp-Flood -Cab Guard
| 15***23 | Lamp Group-Flood; -Horizontal Rh | 1 |
| 25***42 | Lighting Group-Flood; -Cab Guard | 1 |
| 29***25 | Harness As-Lighting | 1 |
272-3274 Panel & Mtg Gp-Circuit Breaker
| 14***45 | Bolt; (M16x2x20-mm) | 2 |
| 16***41 | Lamp Group-Flood; -Cab Guard-Cab | 2 |
| 19***59 | Support | 2 |
274-5081 Panel Gp-Circuit Breaker
| 27***81 | Panel Group-Circuit Breaker | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
| 8T***37 | Bolt (M10x1.50x20mm) | 4 |
283-9266 Panel Gp-Control
| 06***09 | Screw; (8-32x0.75-In) | 2 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 12***02 | Switch Group-Magnetic; -Starting Motor, Start Relay | 1 |
251-0542 Panel Gp-Switch -Engine Speed, Start
| 13***72 | Bolt As; (M12x1.75x20-mm) | 6 |
| 25***42 | Panel Group-Switch; -Engine Speed, Start | 1 |
| 28***67 | Control & Mtg Group-Machine | 1 |
251-0544 Panel Gp-Switch -Engine Speed, Start
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 4 |
235-8200 Plug Gp-Connector -Engine Harness, Protective Cover
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 4 |
330-6034 Sensor Gp-Engine
| 19***93 | Sensor Group-Pressure; -Atmospheric | 1 |
| 19***94 | Sensor Group-Pressure; -Engine Oil | 1 |
| 21***47 | Sensor Group-Pressure; -Air Inlet Manifold | 1 |
231-1978 Sensor Gp-Engine
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 23***78 | Sensor Group-Engine | 1 |
| 24***53 | Plug As | 1 |
178-2345 Sensor Gp-Liquid Level
| 17***45 | Sensor Group-Liquid Level; -Water Separator-Water In Fuel | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
| 23***12 | Sensor Group-Temperature; -Coolant, Water | 1 |
233-1124 Sensor Gp-Liquid Level -Water In Fuel
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***34 | Probe As-Liquid Level; (Water Separator) | 1 |
194-6725 Sensor Gp-Pressure
| 09***61 | Strap; (Cable) | 2 |
| 17***45 | Sensor Group-Liquid Level; -Water Separator-Water In Fuel | 1 |
| 19***25 | Sensor Group-Pressure; -Engine Oil | 1 |
239-2396 Sensor Gp-Pressure
| 21***67 | Seal-O-Ring | 1 |
| 22***36 | Sensor Group-Pressure; -Injection Actuation | 1 |
| 23***96 | Sensor Group-Pressure; -Engine Oil, Fuel | 1 |
267-1402 Sensor Gp-Pressure
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
| 26***02 | Sensor Group-Pressure; -Injection Actuation | 1 |
| 27***93 | Sensor Group-Pressure; (Water Jacket Outlet) | 1 |
266-8650 Sensor Gp-Pressure
| 19***25 | Sensor Group-Pressure; -Engine Oil | 1 |
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
| 26***50 | Sensor Group-Pressure; -Intake Manifold Air | 1 |
276-9067 Sensor Gp-Pressure
| 21***67 | Seal-O-Ring | 1 |
| 24***69 | Sensor Group-Pressure | 1 |
| 27***67 | Sensor Group-Pressure; -Engine Oil, Fuel | 1 |
197-8394 Sensor Gp-Pressure
| 16***03 | Sensor Group-Pressure; (Turbocharger Inlet, Rh) | 1 |
| 19***94 | Sensor Group-Pressure; -Engine Oil | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 1 |
224-4536 Sensor Gp-Pressure
| 16***04 | Sensor Group-Pressure; (Turbocharger Outlet) | 1 |
| 22***36 | Sensor Group-Pressure; -Injection Actuation | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
197-8393 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
| 19***93 | Sensor Group-Pressure; -Atmospheric | 1 |
236-6220 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***76 | Wedge-Plug Lock; (3-Pin) | 1 |
| 19***26 | Harness As-Sensor; (16-18 Ga Wire)(Engine Oil Temperature) | 1 |
210-1747 Sensor Gp-Pressure
| 16***05 | Sensor As-Pressure; (Unfiltered Engine Oil) | 1 |
| 21***47 | Sensor Group-Pressure; -Air Inlet Manifold | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
303-3357 Sensor Gp-Pressure
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
| 23***27 | Plug As-Connector; (3-Pin) | 1 |
| 27***19 | Sensor Group-Pressure; (Engine Block Oil Inlet) | 1 |
4p-5820 Sensor Gp-Speed
| 29***60 | Sensor Group-Pressure | 1 |
| 4P***20 | Sensor Group-Speed; (Eng Speed Pick-Up) | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 1 |
236-6221 Sensor Gp-Speed -Engine Timing
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 17***49 | Strap; (Marker) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
242-9982 Sensor Gp-Speed
| 24***82 | Sensor Group-Speed; -Engine Timing | 1 |
| 24***30 | Sensor Group-Speed; -Engine Timing | 1 |
| 3P***47 | Seal-O-Ring (Id=13.94mm); (13.949mm Id) | 2 |
274-7396 Sensor Gp-Temperature
| 13***45 | Pad; (Connector) | 1 |
| 26***97 | Sensor Group-Temperature; (Air Inlet Manifold) | 1 |
| 27***96 | Sensor Group-Temperature; -Engine Coolant | 1 |
274-7395 Sensor Gp-Temperature
| 23***80 | Seal-O-Ring | 1 |
| 25***53 | Sensor As-Temperature; (Torque Converter Outlet Oil) | 1 |
| 27***95 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
234-5012 Sensor Gp-Temperature
| 13***45 | Pad; (Connector) | 0 |
| 23***12 | Sensor Group-Temperature; -Coolant, Water | 1 |
| 23***80 | Seal-O-Ring | 1 |
197-8391 Sensor Gp-Temperature
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***28 | Plug As | 1 |
| 19***91 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
234-5013 Sensor Gp-Temperature
| 23***13 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
| 25***53 | Sensor As-Temperature; (Torque Converter Outlet Oil) | 1 |
| 6V***09 | Seal-O-Ring (Id=16.36mm); (16.36-mm Id) | 1 |
238-3215 Starting Aid Gp -Air Inlet Heater
| 13***45 | Pad; (Connector) | 1 |
| 23***15 | Starting Aid Group; -Air Inlet Manifold | 1 |
| 26***97 | Sensor Group-Temperature; (Air Inlet Manifold) | 1 |
239-6677 Starting Aid Gp-Ether
| 1U***46 | Sealant (For Locations A) | 0 |
| 23***16 | Heater As; (Starting Aid) | 1 |
| 23***77 | Starting Aid Group-Ether | 1 |
314-3587 Starting Ar-Cold Weather
| 1B***81 | Clip (2"Long) | 4 |
| 23***45 | Nut-Sleeve; (5/16-24-Thd) | 1 |
| 23***34 | Valve Group-Ether Starting | 1 |
237-1962 Starting Motor Gp-Electric
| 0S***97 | Capscrew (1/4 - 28 Nf X 1 Gd8, Hex) | 5 |
| 23***62 | Starting Motor Group-Electric | 1 |
| 25***79 | Kit-Solenoid; (24-Volt)(Starting Motor) | 1 |
338-3454 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
| 0S***97 | Capscrew (1/4 - 28 Nf X 1 Gd8, Hex) | 13 |
180-2435 Starting Motor Gp-Electric
| 18***35 | Starting Motor Group-Electric; -Cold Weather | 1 |
| 23***77 | Starting Aid Group-Ether | 1 |
| 25***20 | Battery & Wiring Group; -Cold Weather | 1 |
197-0986 Starting Motor Gp-Electric
| 19***86 | Starting Motor Group-Electric; (Electric) | 1 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 1 |
| 1S***52 | Terminal-Cable; (00-Ga, 3/8-In Screw) | 1 |
207-1556 Starting Motor Gp-Electric
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 1 |
| 1S***52 | Terminal-Cable; (00-Ga, 3/8-In Screw) | 1 |
| 20***56 | Starting Motor Group-Electric; (24-Volt) | 2 |
7n-0719 Switch Gp-Disconnect -Battery
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
| 0S***97 | Capscrew (1/4 - 28 Nf X 1 Gd8, Hex) | 13 |
| 12***35 | Cover; (Starting Motor) | 1 |
209-5582 Switch Gp-Magnetic -Starting Aid Heater Relay
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
125-1302 Switch Gp-Magnetic -Start Relay
| 12***02 | Switch Group-Magnetic; -Starting Motor, Start Relay | 1 |
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
234-6613 Switch Gp-Position -Hydraulic Lockout
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 23***13 | Switch Group-Position; -Hydraulic Lockout | 1 |
| 3F***56 | Lockwasher; (8.43x15.5x0.76mm Thk) | 2 |
258-0883 Switch Gp-Pressure -Fuel
| 08***83 | Washer; (0.8mm Thk) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***99 | Switch As; (Hydraulic Lockout, Neutral Start) | 1 |
238-1594 Switch Gp-Push Button -Refueling Pump, Start
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 23***94 | Switch Group-Push Button; -Refueling Pump, Start | 1 |
| 6V***89 | Seal-O-Ring (Id=19.18mm) | 1 |
238-1596 Switch Gp-Push Button -Refueling Pump, Stop
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 1S***12 | Screw-Tapping | 2 |
319-4420 Switch Gp-Rotary -Throttle Position
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 1S***12 | Screw-Tapping | 2 |
| 23***11 | Plug As-Connector; (2-Pin) | 1 |
9g-7641 Switch Gp-Start -Engine, Key
| 10***10 | Seal | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 5 |
| 24***08 | Receptacle As-Connector; (6-Pin) | 1 |
239-1134 Valve Gp-Ether Starting
| 23***34 | Valve Group-Ether Starting | 1 |
| 5P***00 | Key Total 2 Pieces Per Unit; (Literature Compartment) | 1 |
| 6V***62 | Screw-Machine; (8-32x0.31-In) | 4 |
359-3473 Warning Gp-Stability -Tilt Cab
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***18 | Clip | 2 |
261-5155 Warning Gp-Stability -Cab
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 26***55 | Warning Group-Stability; -Cab | 1 |
| 35***89 | Filter; (Ether Start) | 1 |
355-8753 Warning Gp-Stability -Tilt Cab
| 14***50 | Relay; (24-Volt)(Hydraulic Lock, Quick Cplr, Supply) | 2 |
| 30***06 | Harness As-Alarm, Accessory Drive Support | 1 |
| 30***28 | Harness As-Monitor; (Machine Stability) | 1 |
251-0623 Wiring Gp-Auxiliary Control -Combined Function, Medium Pressure
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 14***50 | Relay; (24-Volt)(Hydraulic Lock, Quick Cplr, Supply) | 1 |
| 14***51 | Connector-Receptacle | 2 |
328-0370 Wiring Gp-Auxiliary Control -Work Tool, 4-Function, Flow Control
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 8 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***36 | Clip | 2 |
251-0619 Wiring Gp-Boom Float
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 8 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
| 11***36 | Clip | 2 |
251-0432 Wiring Gp-Cab
| 11***36 | Clip | 1 |
| 11***18 | Clip | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
328-0048 Wiring Gp-Cab -Rear View Display
| 10***65 | Terminal; (Female) | 3 |
| 10***75 | Switch As-Toggle; (Hydraulic Attachment Control) | 1 |
| 12***73 | Terminal; (Male) | 3 |
328-0093 Wiring Gp-Cab -Boom Float
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 30***90 | Harness As-Wiring; (Work Area Visual System, Rear) | 1 |
| 32***98 | Harness As-Auxiliary; (Work Area Visual System, Rear) | 1 |
333-1346 Wiring Gp-Cab -Tilt
| 30***90 | Harness As-Wiring; (Work Area Visual System, Rear) | 1 |
| 32***98 | Harness As-Auxiliary; (Work Area Visual System, Rear) | 1 |
| 33***46 | Wiring Group-Cab; -Tilt | 1 |
333-1345 Wiring Gp-Cab -Rear View, Camera
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 4 |
| 12***68 | Socket-Connector; (14-Ga) | 3 |
267-7642 Wiring Gp-Cab -Coupler
| 09***42 | Screw; (Machine) (M6x1.0x16mm) | 2 |
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 3 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 3 |
295-6630 Wiring Gp-Cab Tilt
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***18 | Clip | 1 |
| 13***00 | Clip; (Tab) | 2 |
283-8360 Wiring Gp-Cab Tilt
| 26***23 | Cable As-Coaxial; (3-M) | 1 |
| 28***60 | Wiring Group-Cab Tilt | 1 |
| 7K***81 | Strap-Pressure & Return Hoses To | 6 |
306-8721 Wiring Gp-Camera -Rear Vision Camera
| 16***20 | Switch As-Rocker; (Cab Tilt) | 1 |
| 16***42 | Connector; (Receptacle) | 1 |
| 16***43 | Terminal; (Male) | 5 |
338-5966 Wiring Gp-Camera -Work Area Visual System, Rear
| 13***89 | Clip; (Ladder) | 3 |
| 26***43 | Cable As | 1 |
| 33***66 | Wiring Group-Camera; -Work Area Visual System, Rear | 1 |
267-7803 Wiring Gp-Communication -Product Link 321sr
| 26***03 | Wiring Group-Communication; -Product Link 321sr | 1 |
| 26***43 | Cable As | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 27 |
231-1836 Wiring Gp-Console -Lh
| 11***37 | Clip | 1 |
| 11***18 | Clip | 3 |
| 13***89 | Clip; (Ladder) | 2 |
251-0433 Wiring Gp-Console
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 12***68 | Socket-Connector; (14-Ga) | 11 |
251-0435 Wiring Gp-Console -Rh
| 23***36 | Wiring Group-Console; -Lh | 1 |
| 25***35 | Wiring Group-Console; -Rh | 2 |
236-6226 Wiring Gp-Electronic Control
| 10***64 | Connector-Plug | 1 |
| 10***65 | Terminal; (Female) | 14 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
330-6018 Wiring Gp-Electronic Control
| 10***20 | Plug As-Connector; (2-Pin) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
238-1580 Wiring Gp-Fan -Reversing
| 10***20 | Plug As-Connector; (2-Pin) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***97 | Mount-Wire Tie | 5 |
238-1568 Wiring Gp-Fine Swing
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 23***68 | Wiring Group-Fine Swing | 1 |
| 23***01 | Harness As-Control | 1 |
269-3410 Wiring Gp-Heater -Air Inlet Manifold
| 11***36 | Clip | 4 |
| 11***37 | Clip | 3 |
| 23***71 | Bracket As | 1 |
259-4964 Wiring Gp-Medium Pressure
| 17***13 | Ring-Terminal | 1 |
| 20***77 | Bolt-Flange Head; (M8x1x25-mm) | 2 |
| 20***82 | Switch Group-Magnetic; -Starting Aid Heater Relay-Air Inlet Heater Relay | 1 |
283-8365 Wiring Gp-Platform -Ultra-High Demolition
| 10***86 | Sleeve | 1 |
| 13***89 | Clip; (Ladder) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
267-7748 Wiring Gp-Quick Coupler
| 11***38 | Clip | 4 |
| 11***39 | Strap | 4 |
| 11***18 | Clip | 12 |
238-1570 Wiring Gp-Refueling Pump
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
Engine Arrangement
224-9843 Engine Ar
| 10***96 | Flywheel Group | 1 |
| 11***56 | Fastener Group-Front Housing; (Housing) | 1 |
| 11***27 | Cover Group-Front Housing; -Accessory Drive | 1 |
266-6311 Engine Ar
| 22***43 | Engine Ar | 1 |
| 26***11 | Engine Ar | 1 |
| 26***12 | Muffler Group | 1 |
229-2665 Engine Ar-Core
| 16***06 | Cylinder Block Group | 1 |
| 16***48 | Crankshaft Group | 1 |
| 18***26 | Cooler Group-Engine Oil | 1 |
348-2747 Engine Ar-Core
| 16***06 | Cylinder Block Group | 1 |
| 16***48 | Crankshaft Group | 1 |
| 18***26 | Cooler Group-Engine Oil | 1 |
279-7825 Installation Ar-Engine
| 23***96 | Radiator & Hydraulic Oil Cooler Group | 1 |
| 23***98 | Lines Group-Cooling Air; -Aftercooler To Turbocharger | 1 |
| 23***99 | Fan Group-Suction | 1 |
Frame And Body
275-9192 Counterweight & Mounting Gp
| 24***37 | Spacer; (39x75x20-mm Thk) | 4 |
| 27***92 | Counterweight & Mounting Group | 1 |
| 33***31 | Counterweight Group | 1 |
334-0331 Counterweight Gp
| 08***44 | Spacer; (13.3x21.3x25-mm Thk) | 4 |
| 12***99 | Liner | 1 |
| 18***22 | Liner | 1 |
273-7903 Cover As-Sound Suppression
| 26***78 | Insulation | 1 |
| 27***02 | Liner | 3 |
| 27***03 | Cover As-Sound Suppression | 1 |
259-3667 Cover As-Sound Suppression -Precleaner
| 25***67 | Cover As-Sound Suppression; -Precleaner | 1 |
| 26***71 | Insulation | 1 |
| 26***72 | Insulation | 1 |
259-3552 Cover As-Sound Suppression
| 25***52 | Cover As-Sound Suppression | 1 |
| 25***57 | Liner | 1 |
| 26***07 | Insulation | 1 |
262-2570 Cover As-Sound Suppression -Air Cleaner
| 25***75 | Cover As | 1 |
| 26***70 | Cover As-Sound Suppression; -Air Cleaner | 1 |
| 26***71 | Insulation | 1 |
330-1423 Cover As-Sound Suppression -Fuel, Hydraulic Tanks
| 17***15 | Bumper | 1 |
| 17***39 | Liner | 1 |
| 20***27 | Liner | 1 |
272-5821 Cover Gp-Access -Front, Rh
| 19***51 | Bumper | 2 |
| 25***10 | Bracket As | 1 |
| 25***11 | Bracket As | 1 |
330-1412 Cover Gp-Access -Radiator
| 1K***50 | Spring | 1 |
| 26***76 | Liner | 1 |
| 26***35 | Sheet-Rubber | 1 |
298-3225 Door As-Access -Air Cleaner
| 16***76 | Hinge | 2 |
| 20***89 | Cushion | 1 |
| 24***39 | Insulation | 1 |
289-6893 Door Gp-Access -Radiator
| 09***18 | Nut (M6x1.0 Thd) | 4 |
| 12***01 | Rubber | 1 |
| 16***76 | Hinge | 2 |
289-6897 Door Gp-Access -Pump Compartment
| 09***18 | Nut (M6x1.0 Thd) | 4 |
| 16***76 | Hinge | 2 |
| 18***62 | Cover | 1 |
270-9465 Enclosure Gp-Generator
| 10***08 | Bumper; (Conical) | 2 |
| 12***96 | Seal; (1.084m) | 0 |
| 13***75 | Bolt As-Locking; (M12x1.75x30-mm)(M12x1.75x30-mm)) | 4 |
280-3511 Fender & Cover Gp
| 23***02 | Spacer; (15x35x11-mm Thk) | 2 |
| 23***03 | Washer; (25x35x4-mm Thk) | 2 |
| 28***11 | Fender & Cover Group | 1 |
330-1169 Fender & Cover Gp
| 27***18 | Liner | 1 |
| 33***69 | Fender & Cover Group | 1 |
| 33***70 | Cover As | 1 |
272-9550 Frame Gp-Upper
| 09***90 | Shim (1.0 mm Thick) | 4 |
| 09***64 | Spacer; (103x140x12-mm Thk) | 2 |
| 09***67 | Washer; (22x60x8-mm Thk) | 2 |
267-6756 Gear & Bearing Gp-Swing
| 09***20 | Spacer; (25x44x6-mm Thk) | 46 |
| 11***31 | Bolt-Hex Head; (M24x3x120mm) | 52 |
| 14***73 | Bolt; (M24x3x150-mm) | 31 |
353-0489 Gear & Bearing Gp-Swing
| 14***85 | Seal (1100 cm) (Order By The Centimeter) | 0 |
| 22***74 | Seal-Dust | 1 |
| 35***89 | Gear & Bearing Group-Swing | 1 |
259-3996 Guard Gp-Bottom -Cab Riser
| 13***74 | Bolt As; (M12x1.75x25-mm) | 12 |
| 23***60 | Plate | 1 |
| 25***96 | Guard Group-Bottom; -Cab Riser | 1 |
278-4112 Guard Gp-Bottom
| 09***57 | Hinge As | 1 |
| 10***66 | Bolt; (Self Locking) (M16x2x40mm) | 20 |
| 19***62 | Plate As | 1 |
134-8887 Guard Gp-Swivel
| 13***87 | Guard Group-Swivel; (Swivel) | 1 |
| 13***88 | Plate As | 1 |
| 13***91 | Plate As | 1 |
270-9153 Handrail Gp -Front, Rh
| 17***79 | Clamp | 1 |
| 27***51 | Handrail As | 1 |
| 27***52 | Handrail As | 1 |
272-7007 Handrail Gp -Cab Riser
| 13***74 | Bolt As; (M12x1.75x25-mm) | 4 |
| 27***07 | Handrail Group; -Cab Riser | 1 |
| 27***99 | Handrail | 1 |
295-5882 Hood & Guard Gp
| 08***08 | Shim (1.0mm Thick) | 2 |
| 08***09 | Shim (2.0mm Thick) | 2 |
| 09***84 | Locknut; (M12x1.75-Thd) | 2 |
237-8802 Hood Gp -Precleaner
| 23***02 | Hood Group; -Precleaner | 1 |
| 25***62 | Support As | 1 |
| 25***67 | Cover As-Sound Suppression; -Precleaner | 1 |
289-6754 Hood Gp-Engine
| 09***29 | Cushion | 2 |
| 10***48 | Seal; (0.5-M Each) | 0 |
| 11***89 | Hinge | 2 |
293-3877 Lines Gp-Grease -Tilt Cylinder
| 03***48 | Clip; (11.11mm .437in Id) | 2 |
| 08***40 | Plate | 1 |
| 10***09 | Connector As | 2 |
262-2543 Sheet As-Sound Suppression
| 26***37 | Liner | 1 |
| 26***38 | Liner | 1 |
| 26***39 | Liner | 1 |
256-1919 Sheet As-Sound Suppression
| 25***19 | Sheet As-Sound Suppression | 1 |
| 25***22 | Insulation | 1 |
| 25***23 | Liner | 1 |
270-9648 Sheet As-Sound Suppression
| 10***48 | Seal; (0.5-M Each) | 0 |
| 25***18 | Liner | 1 |
| 27***48 | Sheet As-Sound Suppression | 1 |
256-1912 Sheet As-Sound Suppression
| 25***12 | Sheet As-Sound Suppression | 1 |
| 25***13 | Sheet As | 1 |
| 25***15 | Liner | 1 |
289-7271 Sheet As-Sound Suppression
| 28***71 | Sheet As-Sound Suppression | 1 |
| 28***73 | Liner | 1 |
| 28***74 | Liner | 1 |
307-7936 Sheet As-Sound Suppression
| 25***10 | Sheet-Rubber | 1 |
| 25***11 | Insulation | 1 |
| 25***14 | Insulation | 1 |
336-4509 Sheet As-Sound Suppression
| 10***48 | Seal; (0.5-M Each) | 0 |
| 25***97 | Sheet-Rubber | 1 |
| 25***99 | Insulation | 1 |
256-1853 Sheet As-Sound Suppression
| 25***53 | Sheet As-Sound Suppression | 1 |
| 25***58 | Liner | 1 |
| 25***59 | Insulation | 1 |
256-1890 Sheet As-Sound Suppression
| 25***90 | Sheet As-Sound Suppression | 1 |
| 25***92 | Liner | 1 |
| 25***93 | Liner | 1 |
256-1802 Sheet As-Sound Suppression
| 25***02 | Sheet As-Sound Suppression | 1 |
| 25***05 | Insulation | 1 |
| 25***06 | Insulation | 1 |
256-1826 Sheet As-Sound Suppression
| 25***26 | Sheet As-Sound Suppression | 1 |
| 25***28 | Liner | 1 |
| 25***29 | Liner | 1 |
262-2550 Sheet As-Sound Suppression
| 10***48 | Seal; (0.5-M Each) | 0 |
| 25***24 | Liner | 1 |
| 26***50 | Sheet As-Sound Suppression | 1 |
262-2553 Sheet As-Sound Suppression
| 25***46 | Liner | 1 |
| 25***47 | Insulation | 1 |
| 25***48 | Liner | 1 |
270-9635 Sheet As-Sound Suppression
| 10***48 | Seal; (0.5-M Each) | 0 |
| 25***97 | Sheet-Rubber | 1 |
| 25***99 | Insulation | 1 |
336-4514 Sheet As-Sound Suppression
| 10***48 | Seal; (0.5-M Each) | 0 |
| 27***49 | Liner | 1 |
| 33***01 | Liner | 1 |
272-7008 Step Gp -Cab Riser
| 13***74 | Bolt As; (M12x1.75x25-mm) | 4 |
| 27***08 | Step Group; -Cab Riser | 1 |
| 27***68 | Step As | 1 |
262-2555 Support As-Enclosure
| 26***55 | Support As-Enclosure | 1 |
| 26***56 | Insulation | 1 |
| 26***57 | Insulation | 1 |
330-1408 Support As-Enclosure
| 10***48 | Seal; (0.5-M Each) | 1 |
| 25***09 | Liner | 1 |
| 25***10 | Liner | 1 |
330-1444 Support As-Enclosure
| 25***09 | Liner | 1 |
| 26***59 | Insulation | 1 |
| 33***44 | Support As-Enclosure; -Air Cleaner | 1 |
Fuel System
174-9570 Filter Gp-Water Sep & Fuel
| 10***07 | Seal-O-Ring; (Fuel System) | 1 |
| 14***03 | Seal-O-Ring; (Fuel System) | 2 |
| 14***40 | Ring-Backup; (37.36mm Od), Flasher Switch; Hazard, Replaces 421164a1, Flasher Switch | 1 |
328-2574 Injector Gp-Fuel
| 00***62 | Elbow (To Primary Filter Base) | 1 |
| 03***88 | Connector-Tube Assembly To Main Relief | 1 |
| 11***08 | Clip | 1 |
237-8752 Lines Gp-Fuel
| 11***28 | Seal | 1 |
| 12***38 | Housing; (Receptacle) | 1 |
| 12***39 | Terminal; (Male) | 2 |
231-3039 Lines Gp-Fuel
| 00***64 | End; (Hose) | 2 |
| 09***86 | Clamp; (Hose) | 4 |
| 13***52 | Connector | 1 |
229-1859 Pump & Motor Gp-Refueling
| 22***59 | Pump & Motor Group-Refueling | 1 |
| 23***70 | Wiring Group-Refueling Pump; -Refueling | 1 |
| 29***58 | Film Group; -Fuel Transfer Pump | 1 |
356-2350 Pump Ar-Refueling
| 23***51 | Bolt-Socket Head; (M8x1.25x65-mm) | 2 |
| 32***74 | Injector Group-Fuel | 1 |
| 35***50 | Pump Ar-Refueling | 1 |
267-3361 Pump Gp-Fuel Injection
| 26***61 | Pump Group-Fuel Injection | 7 |
267-3362 Pump Gp-Fuel Injection
| 18***23 | Pump As-Fuel Priming | 1 |
| 26***62 | Pump Group-Fuel Injection | 1 |
| 7X***01 | Bolt-Plt; (1/4unc X 1 1/4) | 1 |
165-9154 Pump Gp-Fuel Priming
| 12***14 | Film-Instruction; (Refueling Pump) | 1 |
| 12***29 | Clip | 1 |
| 13***72 | Bolt As; (M12x1.75x20-mm) | 2 |
357-0082 Pump Gp-Refueling
| 03***50 | Elbow (Check Valve Drain Tube) | 1 |
| 15***06 | Seal-O-Ring; (11.89mm Id) | 1 |
| 18***99 | Connector As | 2 |
258-8745 Pump Gp-Unit Injector Hyd
| 03***50 | Elbow (Check Valve Drain Tube) | 1 |
| 06***74 | Elbow | 1 |
| 18***99 | Connector As | 2 |
319-0677 Pump Gp-Unit Injector Hyd
| 19***38 | Elbow Assem. | 0 |
| 23***43 | Regulator Group-Fuel Pressure | 1 |
| 29***03 | Elbow As | 1 |
312-0677 Pump Gp-Unit Injector Hyd
| 15***36 | Cartridge | 1 |
| 17***28 | Seal-O-Ring; (Fuel Transfer Pump) | 1 |
| 1F***60 | Washer Roll-Over Group To Deck | 1 |
232-0343 Regulator Gp-Fuel Pressure
| 08***10 | Spacer; (16.6x32x26-mm Thk) | 4 |
| 13***72 | Bolt As; (M12x1.75x20-mm) | 2 |
| 23***43 | Regulator Group-Fuel Pressure | 1 |
205-1306 Regulator Gp-Fuel Pressure
| 20***06 | Name-Plate (Portuguese), Regulator Group-Fuel Pressure | 1 |
| 29***20 | Regulator As; (Fuel Pressure) | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 1 |
237-8783 Tank & Mtg Gp-Fuel
| 08***10 | Spacer; (16.6x32x26-mm Thk) | 4 |
| 13***72 | Bolt As; (M12x1.75x20-mm) | 2 |
| 23***83 | Tank & Mtg Group-Fuel | 1 |
351-3020 Tank Gp-Fuel
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 5 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***11 | Valve As; (Fuel Shutoff) | 1 |
327-3333 Tank Gp-Fuel
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 5 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***11 | Valve As; (Fuel Shutoff) | 1 |
139-6873 Valve Gp-Fuel Bypass -Filter
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 5 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***11 | Valve As; (Fuel Shutoff) | 1 |
298-3147 Valve Gp-Fuel Shutoff
| 29***47 | Valve Group-Fuel Shutoff | 1 |
| 9X***37 | Seal-O-Ring | 1 |
Hydraulic System
087-4454 Accumulator Gp-Hydraulic -Charged
| 08***54 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 08***75 | Core | 1 |
| 08***76 | Cap | 1 |
145-5106 Accumulator Gp-Hydraulic -Charged
| 14***06 | Accumulator Group-Hydraulic; -Charged | 1 |
| 15***00 | Film-Warning; (High Pressure Cylinder) | 1 |
180-9419 Accumulator Gp-Hydraulic -Uncharged
| 15***00 | Film-Warning; (High Pressure Cylinder) | 1 |
| 16***79 | Cap; (Accumulator) | 1 |
| 16***80 | Core | 1 |
087-4456 Accumulator Gp-Hydraulic -Charged
| 08***56 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 14***06 | Accumulator Group-Hydraulic; -Charged | 1 |
| 4I***36 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
5i-8416 Accumulator Gp-Hydraulic -Charged
| 08***54 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 2 |
| 4I***67 | Cap | 1 |
| 5I***16 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
164-6981 Accumulator Gp-Hydraulic -Charged
| 08***56 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 16***81 | Accumulator Group-Hydraulic; -Charged | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
227-8807 Accumulator Gp-Hydraulic -Uncharged
| 22***07 | Accumulator Group-Hydraulic; -Uncharged | 1 |
4i-1536 Accumulator Gp-Hydraulic -Charged
| 4I***36 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 4I***39 | Core | 1 |
| 4I***62 | Cap | 1 |
199-7447 Accumulator Gp-Hydraulic -Uncharged
| 19***47 | Accumulator Group-Hydraulic; -Uncharged-Pilot Oil | 1 |
| 4I***39 | Core | 1 |
| 4I***62 | Cap | 1 |
209-5982 Actuator Gp
| 15***39 | Piston | 1 |
| 15***41 | Piston | 1 |
| 15***42 | Guide | 1 |
173-3503 Base Gp-Oil Filter -Hydraulic
| 13***26 | Bolt; (Shoulder) (M6x1x28.75mm) | 1 |
| 13***28 | Shim; (0.1-mm Thk) | 1 |
| 13***31 | Packing | 1 |
255-5822 Control Ar-Auxiliary -Medium Pressure
| 23***20 | Drive Group-Auxiliary Pump; -Accessory Drive | 1 |
| 25***26 | Lines Group-Front; -Medium Pressure Circuit | 1 |
| 25***22 | Control Ar-Auxiliary; -Combined Fctn, Medium Pressure | 1 |
356-2346 Control Ar-Auxiliary -Medium Pressure
| 23***20 | Drive Group-Auxiliary Pump; -Accessory Drive | 1 |
| 25***82 | Pump & Mtg Group-Auxiliary | 1 |
| 25***64 | Wiring Group-Medium Pressure | 1 |
270-5687 Control Ar-Auxiliary -Joystick, 2-Bn, Slide, Trig Sw
| 24***10 | Film Group; -Operator Controls, Notice | 1 |
| 25***95 | Fastener Group-Wiring Harness; -Joystick | 1 |
| 27***87 | Control Ar-Auxiliary; -Joystick, 2-Bn, Slide, Trig Sw | 1 |
297-0494 Control Ar-Auxiliary -System 17, Combined Fn, Med Pr
| 25***23 | Wiring Group-Auxiliary Control; -Combined Function, Medium Pressure | 1 |
| 25***24 | Lines Group-Front; -System 17, Combined Fn, Med Pr | 1 |
| 26***57 | Lines Group-Pilot; -Comb Fctn, Joystk W/Slide Ctl | 1 |
336-3339 Control Ar-Auxiliary -System 18, Combined Function
| 28***43 | Valve & Mtg Group-Main Control | 1 |
| 32***70 | Wiring Group-Auxiliary Control; -Work Tool, 4-Function, Flow Control | 1 |
| 33***89 | Lines Group-Front; -System 18, Combined Function | 1 |
356-2347 Control Ar-Auxiliary -System 18, Combined Function
| 32***70 | Wiring Group-Auxiliary Control; -Work Tool, 4-Function, Flow Control | 1 |
| 33***90 | Lines Group-Pilot; -Work Tool, 4-Function, Flow Control | 1 |
| 35***47 | Control Ar-Auxiliary; -System 18, Combined Function | 1 |
356-2345 Control Ar-Boom
| 23***32 | Lines Group-Boom Cylinder; -Boom Lowering Control | 1 |
| 24***80 | Lines Group-Sensor; -Overload Warning Device | 1 |
| 25***19 | Wiring Group-Boom Float | 1 |
329-6564 Control Ar-Boom -Boom Float, Overload Warning
| 23***32 | Lines Group-Boom Cylinder; -Boom Lowering Control | 1 |
| 24***80 | Lines Group-Sensor; -Overload Warning Device | 1 |
| 25***19 | Wiring Group-Boom Float | 1 |
356-2348 Control Ar-Coupler
| 26***42 | Wiring Group-Cab; -Quick Coupler | 1 |
| 26***48 | Wiring Group-Quick Coupler | 1 |
| 26***16 | Film Group; -Quick Coupler | 1 |
268-6821 Control Ar-Coupler
| 26***42 | Wiring Group-Cab; -Quick Coupler | 1 |
| 26***48 | Wiring Group-Quick Coupler | 1 |
| 26***16 | Film Group; -Quick Coupler | 1 |
264-8479 Control Ar-Fan -Reversing
| 23***80 | Wiring Group-Fan; -Reversing | 1 |
| 24***34 | Motor & Mtg Group-Hydraulic Fan; -Reversing | 1 |
| 25***79 | Lines Group-Motor; -Reversing Fan | 1 |
287-0169 Coupling Gp-Flexible
| 09***10 | Bolt-Socket Head | 4 |
| 09***11 | Pin; (Spring) | 8 |
| 09***12 | Setscrew-Socket; (M20x2.5x25-mm) | 2 |
324-4230 Coupling Gp-Flexible
| 09***10 | Bolt-Socket Head | 4 |
| 09***11 | Pin; (Spring) | 9 |
| 09***12 | Setscrew-Socket; (M20x2.5x25-mm) | 2 |
272-4669 Coupling Gp-Pump
| 09***11 | Pin; (Spring) | 4 |
| 16***64 | Bolt-Socket Head; (M20x2.5x55-mm) | 4 |
| 27***50 | Plate | 1 |
277-0741 Cylinder & Seal Gp-Boom
| 27***88 | Cylinder Group-Boom | 1 |
| 27***41 | Cylinder & Seal Group-Boom | 1 |
| 9X***97 | Seal; (Od=116.15mm) | 2 |
352-3377 Cylinder Ar-Boom
| 27***41 | Cylinder & Seal Group-Boom | 2 |
| 29***25 | Lines Group-Boom Cylinder; -Load Control Valve | 1 |
| 35***77 | Cylinder Ar-Boom | 1 |
270-7888 Cylinder Gp-Boom
| 08***51 | Head | 1 |
| 09***35 | Seal-O-Ring (Id=149.60mm) | 1 |
| 11***62 | Bearing-Sleeve | 1 |
259-4000 Cylinder Gp-Cab Tilt
| 20***36 | Bearing | 4 |
| 21***71 | Kit-Seal; (Cab Tilt Cylinder) | 1 |
| 25***00 | Cylinder Group-Cab Tilt | 1 |
123-4121 Cylinder Gp-Undercarriage -Adjustable Gauge
| 10***92 | Rod Assem. | 1 |
| 11***01 | Washer-Hard; (31x57x6-mm Thk) | 1 |
| 12***21 | Cylinder Group-Undercarriage; -Adjustable Gauge | 1 |
295-9441 Drive Gp-Auxiliary Pump -Accessory Drive
| 17***64 | Bearing | 1 |
| 20***98 | Seal-0-Ring; (Id=29.40mm) | 1 |
| 22***17 | Plate | 1 |
234-4620 Drive Gp-Auxiliary Pump -Accessory Drive
| 10***81 | Bolt; (Socket Head) (M12x1.75x35mm) | 8 |
| 23***20 | Drive Group-Auxiliary Pump; -Accessory Drive | 1 |
| 29***41 | Drive Group-Auxiliary Pump; -Accessory Drive | 1 |
333-2958 Drive Gp-Swing -With Motor
| 20***72 | Motor & Mtg Group-Swing | 1 |
| 33***58 | Drive Group-Swing; -With Motor | 1 |
| 33***59 | Drive Group-Swing; -Without Motor | 1 |
333-2959 Drive Gp-Swing -Without Motor
| 09***30 | Ring; (Retaining) | 1 |
| 09***28 | Washer; (53x84x1-mm Thk) | 8 |
| 09***41 | Ring - Retaining | 1 |
191-2577 Fastener Gp-Swing & Final Dr
| 09***55 | Pin | 1 |
| 19***77 | Fastener Group-Swing & Final Dr | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
158-8987 Filter & Valve Gp-Pilot -Hydraulic Oil
| 15***87 | Filter & Valve Group-Pilot; -Hydraulic Oil | 1 |
| 21***09 | Valve Group-Pilot Relief; -Hydraulic Filter | 1 |
| 5I***70 | Filter-Oil; (Advanced Efficiency)(Hydraulic, Pilot) | 1 |
289-8194 Filter Gp-Oil -Hydraulic, Case Drain
| 09***21 | Filter-Oil; (Advanced Efficiency)(Hydraulic, Case Drain) | 1 |
| 28***94 | Filter Group-Oil; -Hydraulic, Case Drain | 1 |
| 28***95 | Head As-Filter | 1 |
188-4142 Filter Gp-Oil -Hydraulic Return
| 09***81 | Seal-O-Ring | 1 |
| 13***23 | Seal-O-Ring | 4 |
| 13***24 | Screw; (M3x0.5x5-mm) | 8 |
188-4140 Filter Gp-Oil -Hydraulic Return
| 12***03 | Seal-O-Ring (Id=185mm) | 2 |
| 12***34 | Valve As-Bypass | 1 |
| 15***84 | Seal-O-Ring | 1 |
227-0620 Gauge Gp-Sight -Hydraulic Oil Level
| 09***19 | Seal-O-Ring (Id=15.80mm) | 4 |
| 22***20 | Gauge Group-Sight; -Hydraulic Oil Level | 1 |
| 23***57 | Pipe | 1 |
295-9660 Head Gp-Pump
| 09***23 | Ring-Retaining; (External) | 1 |
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 4 |
| 12***70 | Sleeve | 1 |
194-0182 Hose Gp-Hydraulic -Control Valve, Boom
| 11***79 | Flange-Special | 1 |
| 16***73 | Hose As | 1 |
| 16***23 | Tube As | 1 |
194-0180 Hose Gp-Hydraulic -Control Valve, Boom
| 19***80 | Hose Group-Hydraulic; -Control Valve, Boom | 1 |
| 19***81 | Hose Group-Hydraulic; -Control Valve, Boom | 1 |
| 19***82 | Hose Group-Hydraulic; -Control Valve, Boom | 1 |
194-0181 Hose Gp-Hydraulic -Control Valve, Boom
| 16***62 | Hose As | 1 |
| 19***81 | Hose Group-Hydraulic; -Control Valve, Boom | 1 |
| 4J***20 | Seal (For Tilt Ports On Valve) | 1 |
194-0176 Hose Gp-Hydraulic -Control Valve, Stick
| 14***65 | Tube As | 1 |
| 16***65 | Hose As | 1 |
| 19***76 | Hose Group-Hydraulic; -Control Valve, Stick | 1 |
194-0179 Hose Gp-Hydraulic -Control Valve, Stick
| 14***64 | Tube As | 1 |
| 16***69 | Hose As | 1 |
| 19***79 | Hose Group-Hydraulic; -Control Valve, Stick | 1 |
194-0178 Hose Gp-Hydraulic -Control Valve, Stick
| 19***78 | Hose Group-Hydraulic; -Control Valve, Stick | 1 |
| 26***12 | Hose As | 1 |
| 4J***20 | Seal (For Tilt Ports On Valve) | 1 |
194-0174 Hose Gp-Hydraulic -Control Valve, Stick
| 16***60 | Hose Group-Hydraulic; (Control Valve, Stick) | 1 |
| 19***74 | Hose Group-Hydraulic; -Control Valve, Stick | 1 |
| 19***76 | Hose Group-Hydraulic; -Control Valve, Stick | 1 |
194-0177 Hose Gp-Hydraulic -Control Valve, Stick
| 19***77 | Hose Group-Hydraulic; -Control Valve, Stick | 1 |
| 19***78 | Hose Group-Hydraulic; -Control Valve, Stick | 1 |
| 19***79 | Hose Group-Hydraulic; -Control Valve, Stick | 1 |
355-5673 Hydraulic Ar
| 23***18 | Lines Group-Travel Motor; -Long Undercarriage | 1 |
| 24***38 | Lines Group-Control; -Rear | 1 |
| 24***40 | Lines Group-Hydraulic Oil Cooler | 1 |
352-3375 Hydraulic Ar
| 24***25 | Lines Group-Pilot; -Joystick, Pedals | 1 |
| 24***38 | Lines Group-Control; -Rear | 1 |
| 24***40 | Lines Group-Hydraulic Oil Cooler | 1 |
292-2025 Lines Gp-Boom Cylinder -Load Control Valve
| 14***18 | Spacer; (13.5x30x10-mm Thk) | 8 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 2 |
| 27***66 | Support As | 2 |
356-2111 Lines Gp-Boom Cylinder
| 10***98 | Name-Plate (Type Of Machine:Ex1100), Bolt-Socket Head; (M10x1.5x40-mm) | 4 |
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 4 |
| 10***50 | Clamp | 2 |
239-1632 Lines Gp-Boom Cylinder -Boom Lowering Control
| 10***50 | Clamp | 4 |
| 11***56 | Support As | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 8 |
248-9838 Lines Gp-Return -Rear
| 10***15 | Elbow Group | 1 |
| 11***34 | Tee-O-Ring | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
355-8761 Lines Gp-Front -Fore Boom
| 09***81 | Tape-Color; (Orange) | 2 |
| 09***85 | Tape-Color; (Red) | 2 |
| 11***45 | Guard | 1 |
356-2113 Lines Gp-Front -Adjustable Gauge Undercarriage
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
| 16***69 | Adapter Assembly | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
260-7870 Lines Gp-Boom Cylinder
| 10***98 | Name-Plate (Type Of Machine:Ex1100), Bolt-Socket Head; (M10x1.5x40-mm) | 4 |
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 4 |
| 10***50 | Clamp | 2 |
283-8355 Lines Gp-Front -Free Rotate
| 09***81 | Tape-Color; (Orange) | 2 |
| 09***85 | Tape-Color; (Red) | 2 |
| 11***45 | Guard | 1 |
269-9562 Lines Gp-Front -Quick Coupler
| 10***84 | Guard | 1 |
| 10***87 | Hose As (Nom 06, L=2500mm) | 1 |
| 11***52 | Hose As | 1 |
284-4973 Lines Gp-Front -Adjustable Gauge Undercarriage
| 10***01 | Bolt-Socket Head; (M10x1.5x20-mm) | 4 |
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 8 |
| 10***82 | Bolt-Socket Head; (M12x1.75x90-mm) | 4 |
355-8760 Lines Gp-Front -Impl, Swing, Travel, Work Tool
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 8 |
| 10***85 | Bolt-Socket Head; (M12x1.75x60-mm) | 2 |
| 28***05 | Tube As | 1 |
357-0077 Lines Gp-Front -Medium Pressure
| 10***01 | Bolt-Socket Head; (M10x1.5x20-mm) | 4 |
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 8 |
| 10***82 | Bolt-Socket Head; (M12x1.75x90-mm) | 4 |
255-1924 Lines Gp-Front -System 17, Combined Function
| 09***32 | Seal-O-Ring (Id=28.24mm) | 2 |
| 10***01 | Bolt-Socket Head; (M10x1.5x20-mm) | 8 |
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 8 |
357-0080 Lines Gp-Front -System 18, Combined Function
| 10***84 | Guard | 1 |
| 10***87 | Hose As (Nom 06, L=2500mm) | 1 |
| 11***52 | Hose As | 1 |
255-1926 Lines Gp-Front -Medium Pressure Circuit
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
| 16***69 | Adapter Assembly | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
283-8356 Lines Gp-Front -Control Valve, Tilt Cab
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
| 14***14 | Reducer As | 1 |
357-0081 Lines Gp-Front -Universal Quick Coupler
| 09***83 | Nut-Self-Locking; (M10x1.50 Thd) | 6 |
| 10***96 | Bolt-Socket Head; (M10x1.5x50-mm) | 6 |
| 10***02 | Bolt-Socket Head; (M12x1.75x30-mm) | 8 |
260-7869 Lines Gp-Front -Impl, Swing, Travel, Work Tool
| 08***32 | Hose As | 1 |
| 08***35 | Hose As | 1 |
| 10***97 | Bolt-Socket Head; (M12x1.75x50-mm) | 16 |
330-2389 Lines Gp-Front -System 18, Combined Function
| 08***32 | Hose As | 1 |
| 08***35 | Hose As | 1 |
| 10***97 | Bolt-Socket Head; (M12x1.75x50-mm) | 16 |
355-8764 Lines Gp-Front -Control Valve
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
| 14***14 | Reducer As | 1 |
278-7040 Lines Gp-Front -Cab Tilt
| 08***56 | 90 Degrees Elbow | 1 |
| 09***81 | Tape-Color; (Orange) | 2 |
| 09***85 | Tape-Color; (Red) | 2 |
283-8348 Lines Gp-Front -Fore Boom
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 8 |
| 10***85 | Bolt-Socket Head; (M12x1.75x60-mm) | 2 |
| 18***80 | Seal; (8.8-cm) | 0 |
248-9840 Lines Gp-Hydraulic Oil Cooler
| 08***56 | 90 Degrees Elbow | 1 |
| 08***38 | Hose As | 1 |
| 10***00 | Bolt-Socket Head; (M10x1.5x110-mm) | 6 |
255-2079 Lines Gp-Motor -Reversing Fan
| 08***02 | Hose As. | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***31 | Connector-Filter | 1 |
260-7857 Lines Gp-Pilot -Comb Fctn, Joystk W/Slide Ctl
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 4 |
| 14***38 | Adapter, -6 Orb / Orfs X-Long | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 3 |
285-6451 Lines Gp-Pilot -Cab Lowering
| 09***79 | Tape-Color; (White) | 2 |
| 10***36 | Clip | 1 |
| 11***52 | Hose As | 1 |
355-8757 Lines Gp-Pilot -Joystick, Pedals
| 08***02 | Hose As. | 1 |
| 08***66 | Hose As | 1 |
| 08***72 | Hose As (Nom 06, L=1000mm) | 1 |
355-8755 Lines Gp-Pilot -Variable Adjustable Boom
| 09***80 | Tape - Color; (Blue) | 2 |
| 09***82 | Tape-Color; (Yellow) | 2 |
| 10***74 | Hose As (Nom 06, L=2200mm) | 8 |
260-7863 Lines Gp-Pilot -Rotator
| 08***11 | Hose As (Nom 06, L=450mm) | 1 |
| 08***41 | Hose As. | 1 |
| 08***31 | Hose As (Nom 06, L=600mm) | 3 |
355-8758 Lines Gp-Pilot -Heavy Lift
| 08***11 | Hose As (Nom 06, L=450mm) | 1 |
| 08***41 | Hose As. | 1 |
| 08***31 | Hose As (Nom 06, L=600mm) | 2 |
355-8766 Lines Gp-Pilot -Cab Lowering
| 08***11 | Hose As (Nom 06, L=450mm) | 1 |
| 08***41 | Hose As. | 1 |
| 08***31 | Hose As (Nom 06, L=600mm) | 2 |
355-8756 Lines Gp-Pilot -Tilt Cab
| 08***02 | Hose As. | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***31 | Connector-Filter | 1 |
283-8354 Lines Gp-Pilot -1-Pump/2-Pump
| 09***80 | Tape - Color; (Blue) | 2 |
| 09***82 | Tape-Color; (Yellow) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
275-1495 Lines Gp-Pilot -Cab
| 09***92 | Locknut; (M6x1-Thd) | 2 |
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 2 |
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 1 |
283-8353 Lines Gp-Pilot -Tilt Cab
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***71 | Elbow, 45, -6 Orfs Fm Swivel | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
255-1843 Lines Gp-Pilot -Third Pedal, Pilot Valve
| 08***84 | Hose As. | 2 |
| 21***59 | Hose As | 2 |
| 25***43 | Lines Group-Pilot; -Third Pedal, Pilot Valve | 1 |
255-1659 Lines Gp-Pilot -Heavy Lift
| 08***02 | Hose As. | 1 |
| 08***62 | Hose As | 1 |
| 08***65 | Hose As (Nom 06, L=570mm) | 2 |
255-1853 Lines Gp-Pilot -Boom Float
| 08***56 | 90 Degrees Elbow | 1 |
| 08***11 | Hose As (Nom 06, L=450mm) | 1 |
| 08***06 | Hose As | 1 |
260-7867 Lines Gp-Pilot -Control Valve
| 08***11 | Hose As (Nom 06, L=450mm) | 1 |
| 08***41 | Hose As. | 1 |
| 08***31 | Hose As (Nom 06, L=600mm) | 3 |
355-8762 Lines Gp-Pilot -Stick Load Control Valve
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***71 | Elbow, 45, -6 Orfs Fm Swivel | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
283-8362 Lines Gp-Pilot -Fore Boom
| 09***78 | Tape-Color; (Purple) | 2 |
| 09***79 | Tape-Color; (White) | 2 |
| 10***85 | Hose As (Nom 06, L=3000mm); (Nom 06, L=30000mm) | 1 |
355-8759 Lines Gp-Pilot -Control Valve
| 09***92 | Locknut; (M6x1-Thd) | 2 |
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 2 |
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 1 |
330-2390 Lines Gp-Pilot -Work Tool, 4-Function, Flow Control
| 08***02 | Hose As. | 1 |
| 10***31 | Connector-Filter | 1 |
| 12***69 | Fitting-Orfs | 1 |
357-0076 Lines Gp-Pilot -Boom Float
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 3 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 3 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 2 |
288-9141 Lines Gp-Pilot -Cab Lowering
| 08***56 | 90 Degrees Elbow | 1 |
| 09***77 | Ring-Back Up | 1 |
| 14***51 | Connector-Filter | 1 |
307-5106 Lines Gp-Pilot -Main Pump
| 08***56 | 90 Degrees Elbow | 1 |
| 08***83 | Hose As (Nom 06, L=2530mm) | 1 |
| 10***83 | Hose As; (Nom 06, L=2150mm) | 1 |
255-1844 Lines Gp-Pilot -Control Valve, Travel Valve
| 08***56 | 90 Degrees Elbow | 1 |
| 08***71 | Hose As (Nom 06, L=960mm) | 1 |
| 08***83 | Hose As (Nom 06, L=2530mm) | 1 |
355-8763 Lines Gp-Pilot -1-Pump, 2-Pump
| 09***80 | Tape - Color; (Blue) | 2 |
| 09***82 | Tape-Color; (Yellow) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
355-8765 Lines Gp-Pilot -Control Valve
| 09***79 | Tape-Color; (White) | 2 |
| 10***36 | Clip | 1 |
| 11***52 | Hose As | 1 |
357-0078 Lines Gp-Pilot -Medium Pressure
| 10***15 | Elbow Group | 1 |
| 12***13 | Plate | 1 |
| 13***50 | Screen As; (Hydraulic Tank) | 1 |
356-2114 Lines Gp-Pilot -Main Hydraulic
| 08***56 | 90 Degrees Elbow | 1 |
| 08***71 | Hose As (Nom 06, L=960mm) | 1 |
| 08***83 | Hose As (Nom 06, L=2530mm) | 1 |
356-2110 Lines Gp-Pilot -Control Valve
| 08***56 | 90 Degrees Elbow | 1 |
| 09***77 | Ring-Back Up | 1 |
| 14***51 | Connector-Filter | 1 |
283-8357 Lines Gp-Pilot -Control Valve
| 08***84 | Hose As. | 2 |
| 14***52 | Union As | 2 |
| 28***57 | Lines Group-Pilot; -Control Valve | 1 |
248-9825 Lines Gp-Pilot -Joystick, Pedals
| 08***02 | Hose As. | 1 |
| 08***66 | Hose As | 1 |
| 08***72 | Hose As (Nom 06, L=1000mm) | 1 |
260-7861 Lines Gp-Pilot -Medium Pressure
| 10***71 | Hose As (Nom 06, L=2430mm) | 1 |
| 11***52 | Hose As | 1 |
| 12***08 | Guard | 2 |
283-8352 Lines Gp-Pilot -Stick Load Control Valve
| 11***52 | Hose As | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
| 14***35 | Tee, -6 Orb / Orfs | 1 |
356-2112 Lines Gp-Pump -Adjustable Gauge Undercarriage
| 08***44 | Hose | 1 |
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 4 |
| 10***91 | Flange; (Special) | 1 |
284-4972 Lines Gp-Pump -Adjustable Gauge Undercarriage
| 08***44 | Hose | 1 |
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 4 |
| 10***91 | Flange; (Special) | 1 |
356-2115 Lines Gp-Pump -Main Hydraulic
| 10***15 | Elbow Group | 1 |
| 12***13 | Plate | 1 |
| 13***50 | Screen As; (Hydraulic Tank) | 1 |
307-5122 Lines Gp-Pump -Main Hydraulic
| 08***44 | Hose | 1 |
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 4 |
| 10***91 | Flange; (Special) | 1 |
260-7862 Lines Gp-Pump -1-Pump/2-Pump, 1-Way Flow
| 12***64 | Valve Group-Manual; -Track | 1 |
| 12***31 | Valve Group-Pressure Reducing; -Track | 1 |
| 12***72 | Tee | 1 |
357-0079 Lines Gp-Pump -Auxiliary
| 09***83 | Nut-Self-Locking; (M10x1.50 Thd) | 2 |
| 10***02 | Bolt-Socket Head; (M12x1.75x30-mm) | 12 |
| 10***89 | Bolt-Socket Head; (M12x1.75x80-mm) | 16 |
248-9845 Lines Gp-Return -Filters
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***77 | Bolt-Socket Head; (M10x1.5x45-mm) | 4 |
| 10***24 | Bolt-Socket Head; (M12x1.75x100-mm) | 4 |
255-2078 Lines Gp-Return -Load Control, Boom Cylinder
| 22***59 | Sensor As-Pressure; (1-Pump/2-Pump, 1-Way Flow) | 1 |
| 25***78 | Lines Group-Return; -Load Control, Boom Cylinder | 1 |
245-5080 Lines Gp-Sensor -Overload Warning Device
| 10***18 | Grommet | 2 |
| 14***27 | Connector Group | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
239-1618 Lines Gp-Travel Motor
| 12***18 | Spacer | 2 |
| 12***12 | Support As. | 1 |
| 12***74 | Support As. | 1 |
359-3474 Lines Gp-Travel Motor -Adjustable Gauge Undercarriage
| 23***97 | Manifold Group-Control; -Pilot Oil Supply | 1 |
| 23***98 | Manifold Group-Control; -Pilot Oil Supply | 1 |
| 35***74 | Lines Group-Travel Motor; -Adjustable Gauge Undercarriage | 1 |
284-4974 Lines Gp-Travel Motor -Adjustable Gauge Undercarriage
| 12***18 | Spacer | 2 |
| 12***12 | Support As. | 1 |
| 12***74 | Support As. | 1 |
215-5037 Manifold Gp-Control -Pilot Oil Supply
| 12***91 | Valve Group-Solenoid; -Hydraulic Activation Control | 3 |
| 19***96 | Valve-Check | 1 |
| 19***99 | Spring | 1 |
239-8697 Manifold Gp-Control -Pilot Oil Supply
| 12***91 | Valve Group-Solenoid; -Hydraulic Activation Control | 3 |
| 19***96 | Valve-Check | 1 |
| 19***99 | Spring | 1 |
239-8998 Manifold Gp-Control -Pilot Oil Supply
| 23***98 | Manifold Group-Control; -Pilot Oil Supply | 1 |
| 24***76 | Motor Group-Piston; -Hydraulic Fan | 1 |
247-8834 Motor & Mtg Gp-Hydraulic Fan -Reversing
| 24***34 | Motor & Mtg Group-Hydraulic Fan; -Reversing | 1 |
| 33***73 | Motor Group-Swing | 1 |
| 6V***04 | Circlip - External | 1 |
200-3372 Motor & Mtg Gp-Swing
| 09***08 | Bolt-Socket Head; (M16x2x140-mm) | 4 |
| 20***72 | Motor & Mtg Group-Swing | 1 |
| 20***19 | Valve Group-Travel Counterbalance | 1 |
191-5606 Motor & Mtg Gp-Travel
| 15***22 | Swashplate | 1 |
| 18***03 | Seal-Oil | 1 |
| 19***06 | Motor & Mtg Group-Travel | 1 |
234-4638 Motor Gp-Piston -Hydraulic Fan
| 15***22 | Swashplate | 1 |
| 18***03 | Seal-Oil | 1 |
| 19***82 | Shim; (2.5-mm Thk) | 1 |
242-6776 Motor Gp-Piston -Hydraulic Fan
| 20***78 | Valve Group-Relief; -Swing Motor | 2 |
| 24***76 | Motor Group-Piston; -Hydraulic Fan | 1 |
| 33***79 | Motor Group-Swing | 1 |
334-9979 Motor Gp-Swing
| 08***86 | Adapter | 1 |
| 09***72 | Seal - O-Ring (4.80 mm Id) | 2 |
| 09***85 | Seal- -O-Ring (17.80 mm Id) | 1 |
334-9973 Motor Gp-Swing
| 09***00 | Seal-O-Ring (Id=33.70mm) | 2 |
| 09***33 | Seal-Lip Type | 1 |
| 09***11 | Pin; (Spring) | 2 |
271-6376 Motor Gp-Travel
| 10***66 | Bolt; (Self Locking) (M16x2x40mm) | 8 |
| 19***11 | Washer; (17x40x8-mm Thk) | 4 |
| 26***04 | Support As | 1 |
266-1161 Mounting Gp-Main Control Valve
| 26***61 | Mounting Group-Main Control Valve | 1 |
| 6E***45 | Seal-O-Ring | 1 |
| 9T***06 | Plug | 1 |
6e-2746 Plug Gp-Control Valve
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
| 6E***46 | Plug Group-Control Valve | 1 |
| 6E***15 | Plug | 1 |
6e-4816 Plug Gp-Control Valve
| 6E***45 | Seal-O-Ring | 1 |
| 6E***16 | Plug Group-Control Valve | 1 |
| 9T***06 | Plug | 1 |
6e-4793 Plug Gp-Control Valve
| 10***48 | Plug Group-Control Valve | 1 |
| 6E***46 | Plug Group-Control Valve | 1 |
| 6E***93 | Plug Group-Control Valve | 2 |
106-6248 Plug Gp-Control Valve
| 10***48 | Plug Group-Control Valve | 1 |
| 20***35 | Pump Group-Gear | 1 |
| 23***19 | Seal-O-Ring | 1 |
259-0682 Pump & Mtg Gp-Auxiliary
| 25***82 | Pump & Mtg Group-Auxiliary | 1 |
| 27***69 | Coupling Group-Pump | 1 |
| 29***74 | Pump Group-Main Hydraulic; -Slipper | 1 |
310-9486 Pump & Mtg Gp-Main Hydraulic
| 09***95 | Pin, Dowel | 4 |
| 10***41 | Ring-Snap | 2 |
| 13***42 | Flange | 1 |
207-8235 Pump Gp-Gear
| 10***81 | Bolt; (Socket Head) (M12x1.75x35mm) | 2 |
| 20***35 | Pump Group-Gear | 1 |
| 23***19 | Seal-O-Ring | 1 |
295-9674 Pump Gp-Main Hydraulic
| 12***94 | Plug; (Break Off) | 1 |
| 13***80 | Plug | 2 |
| 15***25 | Bearing As-Roller | 1 |
259-0815 Pump Gp-Piston -Hydraulic Fan
| 09***82 | Pin-Spring | 4 |
| 09***29 | Ring; (Retaining) | 2 |
| 09***44 | Ring-Retaining | 1 |
322-8733 Pump Gp-Piston -With Pilot Gear Pump
| 19***79 | Pin | 3 |
| 19***80 | Ring-Retaining | 1 |
| 19***81 | Disc-Thrust | 1 |
233-2530 Rotating Gp-Motor -Hydraulic Fan
| 15***17 | Spring | 1 |
| 15***37 | Plate | 1 |
| 19***79 | Pin | 3 |
266-7833 Rotating Gp-Pump
| 09***39 | Spring | 1 |
| 12***84 | Rod | 1 |
| 20***00 | Screen As; (Hydraulic Tank) | 1 |
259-0922 Screen Gp-Hydraulic -Tank
| 09***25 | Seal-O-Ring (Id=89.60mm) | 3 |
| 09***16 | Seal-O-Ring (Id=109.40mm) | 1 |
| 15***82 | Seal | 5 |
234-4440 Swivel Gp
| 23***40 | Swivel Group | 1 |
| 23***15 | Kit-Seal; (Swivel) | 1 |
234-7109 Swivel Gp
| 23***09 | Swivel Group | 2 |
| 35***02 | Swivel | 1 |
357-7901 Swivel Gp -Hydraulic Electronic
| 15***87 | Filter & Valve Group-Pilot; -Hydraulic Oil | 1 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
| 16***90 | Valve As-Fluid Sampling; (Coolant) | 1 |
239-1611 Tank & Filter Gp-Hydraulic
| 15***87 | Filter & Valve Group-Pilot; -Hydraulic Oil | 1 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
| 16***90 | Valve As-Fluid Sampling; (Coolant) | 1 |
269-9757 Tank & Mtg Gp-Hydraulic
| 09***26 | Lockwasher-Tooth; (M4 Id) | 2 |
| 09***08 | Seal-O-Ring (Id=44.70mm) | 1 |
| 09***35 | Seal-O-Ring (Id=229.30mm) | 1 |
289-5565 Tank Gp-Hydraulic
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
| 25***78 | Valve Group-Control; -Auxiliary | 2 |
| 28***65 | Tank Group-Hydraulic | 1 |
270-5677 Valve & Mtg Gp-Control
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
| 25***78 | Valve Group-Control; -Auxiliary | 1 |
| 27***77 | Valve & Mtg Group-Control; -Variable Adjustable Boom | 1 |
282-2745 Valve & Mtg Gp-Main Control
| 28***45 | Valve & Mtg Group-Main Control | 1 |
| 34***32 | Switch As-Rocker; (Fine Swing) | 1 |
282-2743 Valve & Mtg Gp-Main Control
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
| 25***78 | Valve Group-Control; -Auxiliary | 2 |
| 28***43 | Valve & Mtg Group-Main Control | 1 |
334-2307 Valve Ar-Swing -Without Fine Swing
| 33***07 | Valve Ar-Swing; -Without Fine Swing | 1 |
8j-6875 Valve Gp-Shuttle
| 11***85 | Plug | 4 |
| 2D***42 | Ball 6.35 mm(.25 In.)Diameter | 4 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 4 |
357-9264 Valve Gp-Bank 3
| 09***85 | Seal- -O-Ring (17.80 mm Id) | 1 |
| 09***01 | Seal-O-Ring (Id=34.70mm) | 1 |
| 09***02 | Seal-O-Ring | 1 |
297-0370 Valve Gp-Check
| 09***98 | Spring, Check | 1 |
| 10***68 | Plug-Pipe | 11 |
| 11***59 | Plug; (Pipe) (3/8-18 Thd) | 3 |
254-3080 Valve Gp-Control -Quick Coupler
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
| 09***87 | Ring, Back-Up; (Buck Up) | 1 |
| 15***59 | Housing | 1 |
234-4624 Valve Gp-Control -Reverse Flow Fan
| 10***93 | Spring | 1 |
| 15***76 | Bolt-Special | 1 |
| 23***24 | Valve Group-Control; -Reverse Flow Fan | 1 |
285-1531 Valve Gp-Control -Medium Pressure
| 13***86 | Harness As-Solenoid; (Hammer Solenoid) | 1 |
| 16***07 | Valve Group-Solenoid; (Medium Pressure) | 1 |
| 17***45 | Valve As | 1 |
310-7149 Valve Gp-Control -Cab Tilt, Rotator
| 09***90 | Seal-O-Ring (Id=21.80mm) | 5 |
| 09***87 | Ring, Back-Up; (Buck Up) | 5 |
| 11***59 | Plug; (Pipe) (3/8-18 Thd) | 1 |
352-6857 Valve Gp-Control -Without Covers, Housings
| 09***22 | Seal-O-Ring (Id=20.80mm) | 2 |
| 09***82 | Seal-O-Ring (Id=13.80mm) | 1 |
| 09***65 | Spring | 2 |
285-1362 Valve Gp-Control
| 17***48 | Valve As-Control; (End Cover) | 1 |
| 26***03 | Valve Group-Relief; (160-Bar) (2321-Psi) | 2 |
| 26***45 | Valve As-Relief; (Main) | 1 |
244-8400 Valve Gp-Control -Without Covers, Housings
| 12***91 | Valve Group-Solenoid; -Hydraulic Activation Control | 1 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 2 |
| 17***32 | Kit-Seal; (Quick Coupler Valve) | 1 |
352-6851 Valve Gp-Control -Heavy Lift, Lh
| 10***93 | Spring | 3 |
| 10***94 | Spring | 1 |
| 10***96 | Spring | 1 |
352-6847 Valve Gp-Control -Without Covers, Housings
| 09***75 | Seal - O-Ring (7.80 mm Id) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 3 |
| 09***03 | Seal-O-Ring | 1 |
285-1357 Valve Gp-Control -Without Covers, Housings
| 09***90 | Seal-O-Ring (Id=21.80mm) | 5 |
| 09***87 | Ring, Back-Up; (Buck Up) | 5 |
| 11***59 | Plug; (Pipe) (3/8-18 Thd) | 1 |
285-1348 Valve Gp-Control -Without Covers, Housings
| 10***93 | Spring | 3 |
| 10***94 | Spring | 1 |
| 10***96 | Spring | 1 |
285-1347 Valve Gp-Control -Heavy Lift, Lh
| 10***93 | Spring | 2 |
| 10***94 | Spring | 1 |
| 10***96 | Spring | 1 |
259-7378 Valve Gp-Control -Auxiliary
| 09***75 | Seal - O-Ring (7.80 mm Id) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 3 |
| 09***03 | Seal-O-Ring | 1 |
352-6854 Valve Gp-Control -Without Covers, Housings
| 10***93 | Spring | 2 |
| 10***94 | Spring | 1 |
| 10***96 | Spring | 1 |
201-9236 Valve Gp-Flow Control -Boom Float, Pilot Oil
| 08***66 | Spring | 1 |
| 09***94 | Seal-O-Ring (Id=25.70mm) | 1 |
| 09***89 | Ring, Back-Up | 1 |
263-1962 Valve Gp-Load Control -Boom Lowering, Drift Reduction
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
| 20***64 | Valve Group-Relief; -Negative Flow Control | 1 |
| 26***62 | Valve Group-Load Control; -Boom Lowering, Drift Reduction | 1 |
255-5680 Valve Gp-Load Control -Stick Drift Red, Line Relief
| 08***66 | Spring | 1 |
| 09***94 | Seal-O-Ring (Id=25.70mm) | 1 |
| 09***89 | Ring, Back-Up | 1 |
255-5683 Valve Gp-Load Control -Boom Drift Red, Line Relief
| 12***97 | Ring | 1 |
| 15***35 | Shim; (0.1-mm Thk) | 3 |
| 19***41 | Plug As | 1 |
285-1345 Valve Gp-Main Control -Heavy Lift
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
| 20***64 | Valve Group-Relief; -Negative Flow Control | 1 |
| 28***45 | Valve Group-Main Control; -Heavy Lift | 1 |
270-5692 Valve Gp-Manual -Boom Lower
| 09***76 | Seal | 4 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 4 |
| 09***28 | Sleeve | 4 |
121-9164 Valve Gp-Manual
| 12***64 | Valve Group-Manual; -Track | 1 |
| 16***13 | Seat | 1 |
| 16***14 | Plug | 1 |
310-0414 Valve Gp-Pilot -Travel
| 09***84 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
| 09***96 | Seal-O-Ring (Id=28.70mm) | 1 |
297-0531 Valve Gp-Pilot -Joystick, Lh
| 08***10 | Setscrew; (M10x21-mm) | 4 |
| 08***08 | Pedal | 2 |
| 09***73 | Bolt; (Socket Head) (M12x1.75x60mm) | 2 |
297-0530 Valve Gp-Pilot -Joystick, Rh
| 09***76 | Seal | 4 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 4 |
| 09***28 | Sleeve | 4 |
215-4909 Valve Gp-Pilot Relief -Hydraulic Filter
| 15***81 | Plug-Socket Head; (9/16-18 Thd) | 1 |
| 21***09 | Valve Group-Pilot Relief; -Hydraulic Filter | 1 |
| 24***87 | Valve Group-Pressure Reducing | 1 |
310-0210 Valve Gp-Pressure Reducing -Boom, Swing Priority
| 14***74 | Valve | 1 |
| 14***77 | Pin | 1 |
| 15***86 | Spring | 1 |
232-4102 Valve Gp-Pressure Reducing -Stick
| 09***80 | Seal-O-Ring (Id=11.80mm) | 2 |
| 09***82 | Seal-O-Ring (Id=13.80mm) | 2 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 2 |
124-1331 Valve Gp-Pressure Reducing
| 09***80 | Seal-O-Ring (Id=11.80mm) | 2 |
| 09***82 | Seal-O-Ring (Id=13.80mm) | 2 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 2 |
323-7898 Valve Gp-Priority -Swing
| 03***53 | Seal-O-Ring; (08.92mm Id) | 2 |
| 03***43 | Seal-O-Ring | 1 |
| 13***89 | Plug | 1 |
259-0907 Valve Gp-Pump Control -Hydraulic Fan
| 10***70 | Spring | 1 |
| 10***71 | Valve | 1 |
| 25***07 | Valve Group-Pump Control; -Hydraulic Fan-Fan Pump | 1 |
147-4163 Valve Gp-Relief
| 09***98 | Seal-O-Ring (Id=29.40mm) | 1 |
| 14***63 | Valve Group-Relief; -Negative Flow Control | 1 |
| 16***65 | Ring-Back Up; (Backup) | 1 |
255-5662 Valve Gp-Relief -Line
| 09***78 | Seal-O-Ring (Id=9.80mm) | 1 |
| 10***52 | Ring | 2 |
| 10***53 | Ring | 2 |
204-2755 Valve Gp-Relief
| 14***61 | Valve Group-Relief; -Negative Flow Control | 1 |
| 15***39 | Cover | 1 |
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
310-0393 Valve Gp-Relief
| 13***74 | Bolt-Socket Head; (M5x0.8x20-mm) | 1 |
| 15***72 | Bolt-Socket Head; (M4x0.07-Thd) | 1 |
| 22***45 | Washer; (Stop) | 1 |
255-5661 Valve Gp-Relief -Line
| 09***78 | Seal-O-Ring (Id=9.80mm) | 1 |
| 10***52 | Ring | 2 |
| 10***53 | Ring | 2 |
147-4161 Valve Gp-Relief
| 10***70 | Spring | 1 |
| 10***71 | Valve | 1 |
| 14***61 | Valve Group-Relief; -Negative Flow Control | 1 |
206-3164 Valve Gp-Relief
| 09***78 | Seal-O-Ring (Id=9.80mm) | 1 |
| 10***52 | Ring | 2 |
| 10***53 | Ring | 2 |
255-5747 Valve Gp-Relief
| 09***79 | Seal-O-Ring (Id=10.80mm) | 1 |
| 09***84 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***87 | Seal-O-Ring (Id=20.80mm) | 1 |
204-2678 Valve Gp-Relief
| 09***86 | Seal - O-Ring (19.80 mm Id) | 2 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
| 09***01 | Seal-O-Ring (Id=34.70mm) | 1 |
226-9860 Valve Gp-Shutoff
| 22***60 | Valve Group-Shutoff; -Cab Manual Lowering | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 2 |
| 4B***84 | Ball | 1 |
123-2430 Valve Gp-Shuttle
| 12***30 | Valve Group-Shuttle; (Work Tool) | 1 |
| 12***11 | Tee-Orfs | 1 |
| 12***52 | Connector | 2 |
123-2549 Valve Gp-Shuttle
| 12***31 | Body-Valve | 1 |
| 12***49 | Valve Group-Shuttle | 1 |
| 12***52 | Connector | 1 |
185-0462 Valve Gp-Shuttle
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
112-0083 Valve Gp-Shuttle
| 11***83 | Valve Group-Shuttle; -Third Pedal, Straight Travel | 1 |
| 12***52 | Connector | 2 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
164-6980 Valve Gp-Shuttle
| 09***78 | Seal-O-Ring (Id=9.80mm) | 7 |
| 10***79 | Plug | 7 |
| 16***80 | Valve Group-Shuttle | 1 |
164-6979 Valve Gp-Shuttle
| 12***49 | Valve Group-Shuttle | 1 |
| 16***79 | Valve Group-Shuttle | 1 |
| 6V***97 | Seal (Later Machines And Field Installed) | 2 |
259-7430 Valve Gp-Solenoid -Pressure Reducing
| 09***85 | Seal- -O-Ring (17.80 mm Id) | 1 |
| 09***01 | Seal-O-Ring (Id=34.70mm) | 1 |
| 09***02 | Seal-O-Ring | 1 |
242-6880 Valve Gp-Solenoid
| 12***91 | Valve Group-Solenoid; -Hydraulic Activation Control | 1 |
| 24***80 | Valve Group-Solenoid | 1 |
| 8T***88 | Screw (Required Only When Bosch Alternator Is Fitted) | 2 |
185-0472 Valve Gp-Solenoid
| 11***25 | Plug | 1 |
| 15***06 | Seal-O-Ring; (11.89mm Id) | 1 |
| 18***72 | Valve Group-Solenoid; -Boom Float | 1 |
259-7429 Valve Gp-Solenoid
| 11***16 | Valve Group-Solenoid; -Grapple Signal-Ground Saw, Grapple Control | 2 |
| 25***29 | Valve Group-Solenoid; -4-Function | 1 |
| 8T***88 | Screw (Required Only When Bosch Alternator Is Fitted) | 4 |
297-0371 Valve Gp-Solenoid
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 12***14 | Seal-O-Ring (Id=10.82mm) | 1 |
| 12***15 | Seal-O-Ring (Id=12.42mm) | 1 |
111-9916 Valve Gp-Solenoid
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
258-6749 Valve Gp-Solenoid
| 11***16 | Valve Group-Solenoid; -Grapple Signal-Ground Saw, Grapple Control | 4 |
| 25***49 | Valve Group-Solenoid | 1 |
| 8T***88 | Screw (Required Only When Bosch Alternator Is Fitted) | 8 |
225-4558 Valve Gp-Solenoid
| 12***91 | Valve Group-Solenoid; -Hydraulic Activation Control | 1 |
| 22***58 | Valve Group-Solenoid; -Pump Control | 1 |
| 24***93 | Block | 1 |
121-6303 Valve Gp-Solenoid
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
| 11***16 | Valve Group-Solenoid; -Grapple Signal-Ground Saw, Grapple Control | 1 |
| 12***03 | Valve Group-Solenoid; -Variable Adjustable Boom | 1 |
315-4412 Valve Gp-Solenoid
| 31***12 | Valve Group-Solenoid; -Fine Swing | 1 |
| 33***84 | Valve Group-Solenoid & Relief | 1 |
171-0188 Valve Gp-Solenoid
| 09***19 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***78 | Seal-O-Ring (Id=9.80mm) | 1 |
| 09***22 | Bolt-Socket Head; (M5x0.8x10-mm) | 2 |
121-1491 Valve Gp-Solenoid
| 09***19 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***78 | Seal-O-Ring (Id=9.80mm) | 1 |
| 09***22 | Bolt-Socket Head; (M5x0.8x10-mm) | 2 |
225-4518 Valve Gp-Solenoid
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 11***23 | Nut Assem.; (M6x1-Thd) | 1 |
| 22***18 | Valve Group-Solenoid; -Pump Control | 1 |
323-7559 Valve Gp-Solenoid & Relief
| 09***97 | Seal-O-Ring (Id=29.70mm) | 1 |
| 09***04 | Seal-O-Ring (Id=39.70mm) | 1 |
| 09***91 | Ring-Backup | 1 |
335-0084 Valve Gp-Solenoid & Relief
| 09***76 | Seal-O-Ring | 1 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***98 | Seal-O-Ring (Id=29.40mm) | 2 |
297-0265 Valve Gp-Solenoid & Relief
| 29***65 | Valve Group-Solenoid & Relief | 1 |
| 32***59 | Valve Group-Solenoid & Relief | 1 |
323-7558 Valve Gp-Solenoid & Relief -With Block
| 08***38 | Seal-O-Ring | 1 |
| 10***41 | Ring; (Retaining) | 1 |
| 10***17 | Spring | 1 |
322-8716 Valve Gp-Swing Cushion -Fine Swing
| 09***45 | Washer; (28.5x37x2-mm Thk) | 2 |
| 20***55 | Valve Group-Relief; -Crossover | 2 |
| 20***20 | Spring | 2 |
204-2819 Valve Gp-Travel Counterbalance
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 2 |
| 11***36 | Clip | 3 |
| 20***19 | Valve Group-Travel Counterbalance | 1 |
Lubrication System
187-0474 Filter Gp-Engine Oil
| 18***74 | Filter Group-Engine Oil | 1 |
| 19***31 | Hose-Disposal; (Fumes) | 1 |
| 22***18 | Bracket | 1 |
196-1829 Fumes Disposal Gp
| 19***26 | Bracket As | 1 |
| 19***29 | Fumes Disposal Group | 1 |
| 20***74 | Gauge-Oil Level; (Dipstick, Engine) | 1 |
242-1586 Gauge Gp-Oil Level (Dipstick) -Engine
| 03***34 | Seal-O-Ring | 1 |
| 19***52 | Gasket | 1 |
| 20***82 | Bolt; (M8x1.25x25-mm) | 2 |
202-6603 Lines Gp-Engine Oil
| 09***88 | Clamp; (Hose) | 1 |
| 20***03 | Lines Group-Engine Oil | 1 |
| 5P***43 | Hose 34 cm (13.39 In.) | 0 |
239-6408 Lines Gp-Engine Oil Drain
| 16***66 | Tube As | 1 |
| 18***98 | Connector As | 1 |
| 18***04 | Elbow As; (90 Degree) | 1 |
165-4465 Lines Gp-Turbocharger Oil
| 16***65 | Lines Group-Turbocharger Oil | 1 |
| 18***99 | Connector As | 1 |
| 18***04 | Elbow As; (90 Degree) | 1 |
239-6409 Mounting Gp-Engine Oil Filter
| 22***44 | Gear Assem.; (60 Teeth) | 1 |
| 23***09 | Mounting Group-Engine Oil Filter | 1 |
| 33***05 | Pump As-Engine Oil | 1 |
195-8098 Pump Gp-Engine Oil
| 19***98 | Pump Group-Engine Oil; (Engine Oil) | 1 |
| 20***93 | Gasket | 1 |
| 29***67 | Core As-Oil Cooler; (Engine) | 1 |
Machine Arrangement
352-3376 Chassis Ar
| 23***24 | Sensor Group-Liquid Level; -Water In Fuel | 1 |
| 23***52 | Lines Group-Fuel | 1 |
| 23***83 | Tank & Mtg Group-Fuel | 1 |
287-6796 Conversion Ar-Machine -Demolition
| 13***87 | Guard Group-Swivel; (Swivel) | 1 |
| 22***79 | Air Conditioner Ar | 1 |
| 23***52 | Roller Ar-Track & Carrier | 1 |
352-3381 Oem Ar-Mobile Hyd Power Unit
| 18***60 | Guard Group-Track Guide; -Full Length | 1 |
| 23***71 | Alarm Group-Travel; -Backup | 1 |
| 24***69 | Air Cleaner Ar; -Precleaner | 1 |
355-5670 Oem Ar-Mobile Hyd Power Unit
| 18***60 | Guard Group-Track Guide; -Full Length | 1 |
| 23***71 | Alarm Group-Travel; -Backup | 1 |
| 24***69 | Air Cleaner Ar; -Precleaner | 1 |
354-7372 Option Ar-Machine
| 22***79 | Air Conditioner Ar | 1 |
| 23***52 | Roller Ar-Track & Carrier | 1 |
| 24***35 | Guard Group-Travel Motor; -Heavy-Duty | 1 |
356-2119 Option Ar-Machine
| 13***87 | Guard Group-Swivel; (Swivel) | 1 |
| 22***79 | Air Conditioner Ar | 1 |
| 23***52 | Roller Ar-Track & Carrier | 1 |
354-7369 Special Ar-Oem
| 19***76 | Power Train Ar | 1 |
| 22***61 | Electronics Group-Monitor | 1 |
| 26***11 | Engine Ar | 1 |
352-3379 Special Ar-Oem
| 19***76 | Power Train Ar | 1 |
| 22***61 | Electronics Group-Monitor | 1 |
| 26***11 | Engine Ar | 1 |
Operator Station
229-9080 Air Conditioner & Mounting Gp
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 2 |
| 11***36 | Clip | 3 |
| 22***80 | Air Conditioner & Mounting Group | 1 |
229-9079 Air Conditioner Ar
| 18***00 | Screw-Tapping | 35 |
| 18***02 | Screw As; (Tapping) | 3 |
| 22***79 | Air Conditioner Ar | 1 |
229-9081 Air Conditioner Gp
| 18***00 | Screw-Tapping | 35 |
| 18***02 | Screw As; (Tapping) | 3 |
| 22***81 | Air Conditioner Group | 1 |
316-8917 Air Conditioner Gp
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 18***86 | Screw-Machine; (M4x0.7x8-mm) | 2 |
| 23***51 | Support As | 1 |
259-7346 Armrest Gp -Rh
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 18***86 | Screw-Machine; (M4x0.7x8-mm) | 2 |
| 23***52 | Support As | 1 |
259-7347 Armrest Gp -Lh
| 25***47 | Armrest Group; -Lh | 1 |
| 2U***52 | Lockwasher From 5wd169 - Up And Field Installed | 5 |
| 6V***83 | Bolt (16mm Long); (M6x1x16-mm) | 3 |
259-7295 Bracket Gp-Mirror
| 25***95 | Bracket Group-Mirror | 1 |
| 2U***52 | Lockwasher From 5wd169 - Up And Field Installed | 5 |
| 6V***83 | Bolt (16mm Long); (M6x1x16-mm) | 3 |
346-7375 Bracket Gp-Mirror
| 09***72 | Screw-Machine; (M4x0.7x16-mm) | 12 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 8 |
| 10***80 | Bolt-Socket Head; (M6x1x45-mm) | 2 |
265-5440 Cab Gp -Interior
| 10***08 | Bumper; (Conical) | 2 |
| 11***27 | Screw-Machine; (M6x1x30-mm) | 2 |
| 11***53 | Screw-Special | 1 |
280-0436 Cab Gp -Demolition
| 28***36 | Cab Group; -Demolition | 1 |
| 32***74 | Camera Ar; -Work Area Visual System, Rear | 1 |
| 33***54 | Mirror Group | 1 |
265-6462 Cab Gp -Exterior
| 22***13 | Monitor & Mtg Group-Operator | 1 |
| 24***64 | Trim Group-Cab; -Interior, Front | 1 |
| 25***49 | Guard Group-Overhead; -Demolition | 1 |
329-6573 Camera & Mirror Ar
| 12***36 | Seal-O-Ring (Id=13.4mm); (Id=13.40mm) | 1 |
| 12***38 | Seal-O-Ring (Id=6.7mm); (Id=6.70mm) | 1 |
| 24***37 | Valve As-Expansion | 1 |
245-7836 Coil Gp-Evaporator
| 13***89 | Clip; (Ladder) | 2 |
| 24***36 | Coil Group-Evaporator | 1 |
| 25***92 | Bolt; (M8x1.25x80-mm) | 2 |
276-3814 Compressor Gp-Refrigerant
| 24***42 | Bracket As | 1 |
| 24***43 | Bracket As | 1 |
| 27***14 | Compressor Group-Refrigerant; (Refrigerant) | 1 |
245-7940 Condenser & Mtg Gp-Refrigerant
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***00 | Nut-Flange; (M8x1.25-Thd) | 4 |
| 22***46 | Bolt As | 8 |
334-6569 Condenser Gp-Refrigerant
| 12***17 | Guard | 2 |
| 17***16 | Grommet | 2 |
| 17***22 | Grommet | 2 |
259-7349 Console Gp-Operator -Lh
| 25***49 | Console Group-Operator; -Lh | 1 |
| 29***38 | Control Group-Pilot Operated Hydraulic; -Rh | 1 |
| 29***39 | Control Group-Pilot Operated Hydraulic; -Lh | 1 |
259-7348 Console Gp-Operator -Rh
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 5 |
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 23***79 | Nut-Speed | 6 |
245-7922 Console Gp-Operator
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 4 |
| 18***84 | Cover | 1 |
| 23***79 | Nut-Speed | 2 |
270-5689 Control & Mtg Gp-Joystick -2-Button, Slide, Trigger Sw
| 11***83 | Pin-Spring | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 6 |
| 24***93 | Receptacle As-Connector; (6-Pin) | 1 |
260-2110 Control Gp-Handle -Joystick, Lh
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 6 |
| 24***93 | Receptacle As-Connector; (6-Pin) | 1 |
| 26***10 | Control Group-Handle; -Joystick, Lh | 1 |
297-4590 Control Gp-Handle -Lh
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 2 |
| 12***73 | Pin | 1 |
| 13***74 | Pedal-Rubber | 1 |
260-2109 Control Gp-Handle -Joystick, Rh
| 11***83 | Pin-Spring | 1 |
| 26***09 | Control Group-Handle; -Joystick, Rh | 1 |
| 26***11 | Lever | 1 |
275-7648 Control Gp-Hydraulic Pedal -Lh
| 09***28 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 11***49 | Pedal Assem.; (L.H.) | 1 |
259-7179 Control Gp-Hydraulic Pedal
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 2 |
| 12***65 | Pedal-Rubber; (Lh) | 1 |
| 12***73 | Pin | 1 |
170-9497 Control Gp-Pilot Operated Hyd -Travel
| 17***97 | Control Group-Pilot Operated Hydraulic; -Travel | 1 |
| 26***09 | Control Group-Handle; -Joystick, Rh | 1 |
| 29***30 | Valve Group-Pilot; -Joystick, Rh | 1 |
297-0539 Control Gp-Pilot Operated Hyd -Lh
| 23***99 | Cover As | 1 |
| 23***02 | Cover-Access; (Fuse-Rear Panel) | 1 |
| 23***93 | Fastener | 2 |
297-0538 Control Gp-Pilot Operated Hyd -Rh
| 26***10 | Control Group-Handle; -Joystick, Lh | 1 |
| 29***31 | Valve Group-Pilot; -Joystick, Lh | 1 |
| 29***38 | Control Group-Pilot Operated Hydraulic; -Rh | 1 |
234-6501 Cover Gp-Cab -Rear
| 15***43 | Cover | 1 |
| 15***44 | Cover | 1 |
| 17***42 | Cover | 1 |
249-0530 Cover Gp-Cab -Exterior, Lh
| 24***30 | Cover Group-Cab; -Exterior, Lh | 1 |
| 30***40 | Cover | 1 |
| 7X***29 | Washer; (11x25x3-mm Thk) | 3 |
269-2544 Cover Gp-Cab Riser
| 26***44 | Cover Group-Cab Riser | 1 |
234-6500 Cover Gp-Storage -Cab, Rear
| 15***67 | Door As | 1 |
| 15***77 | Hinge | 2 |
| 23***00 | Cover Group-Storage; -Cab, Rear | 1 |
265-5365 Door Gp-Cab
| 17***96 | Clip | 3 |
| 23***76 | Duct As; (Fresh Air, Upper) | 1 |
| 23***77 | Duct As; (Vent, Rear) | 1 |
265-5364 Door Gp-Cab
| 11***38 | Screw; (M6x1x20-mm) | 4 |
| 15***97 | Clip | 45 |
| 15***71 | Glass | 1 |
229-9082 Duct Gp-Cab Air
| 19***53 | Guard As | 1 |
| 21***05 | Film; (Warning) (No Weld/ No Drill) (Rearward Of Rh Cab Door) | 1 |
| 22***05 | Spacer; (18x38x40-mm Thk) | 2 |
259-8749 Guard Gp-Overhead -Demolition
| 09***82 | Nut Self-Locking; (M8x1.25 Thd) | 2 |
| 11***24 | Spring As; (Gas) | 2 |
| 14***18 | Spacer; (13.5x30x10-mm Thk) | 2 |
253-9224 Guard Gp-Window
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 23***11 | Plug As-Connector; (2-Pin) | 1 |
| 25***24 | Guard Group-Window | 1 |
277-9100 Horn Gp-Electric -24-Volt, High Tone
| 18***00 | Screw-Tapping | 6 |
| 19***66 | Relay; (Compressor Clutch) | 4 |
| 24***13 | Motor As | 1 |
245-7812 Housing Gp-Air Conditioner -Inlet Air
| 24***12 | Housing Group-Air Conditioner; -Inlet Air | 1 |
| 24***95 | Kit-Clip; (Includes 28-Clips) | 1 |
| 32***46 | Kit-Cylinder; (Dampener)(Dampener) | 1 |
251-0538 Radio Gp -Am/Fm
| 25***38 | Installation Group-Radio | 1 |
| 33***08 | Software Group-Communication; (Product Link 121sr) | 1 |
333-4157 Kit-Seat Suspension -Air
| 15***42 | Lever As | 1 |
| 16***64 | Bracket | 1 |
| 17***41 | Pin | 1 |
164-0528 Lever Gp-Cab Door
| 11***45 | Guard | 1 |
| 12***36 | Seal-O-Ring (Id=13.4mm); (Id=13.40mm) | 1 |
| 12***38 | Seal-O-Ring (Id=6.7mm); (Id=6.70mm) | 1 |
283-8358 Lines Gp-Air Conditioner
| 09***45 | Cable; (Lanyard) | 1 |
| 28***58 | Lines Group-Air Conditioner | 1 |
| 5P***58 | Sleeve; (Cable Splice) | 2 |
261-5161 Lines Gp-Air Conditioner -Tilt Cab
| 10***73 | Clip | 5 |
| 12***98 | Bracket Assem. | 1 |
| 12***36 | Seal-O-Ring (Id=13.4mm); (Id=13.40mm) | 1 |
7y-0059 Literature Gp
| 33***62 | Mirror Group-Down View; -Fuel Tank, Rh | 1 |
| 33***69 | Fender & Cover Group | 1 |
| 7Y***59 | Literature Group | 1 |
330-1354 Mirror Gp
| 13***75 | Bolt As-Locking; (M12x1.75x30-mm)(M12x1.75x30-mm)) | 3 |
| 32***25 | Tube As | 1 |
| 32***62 | Mirror Group-Rear View | 1 |
330-1162 Mirror Gp-Down View -Fuel Tank, Rh
| 13***70 | Mirror | 1 |
| 25***96 | Support As | 1 |
| 32***97 | Bar As | 1 |
255-2715 Mirror Gp-Rear View -Exterior, Front, Rh
| 25***15 | Mirror Group-Rear View; -Exterior, Front, Rh | 1 |
| 8T***69 | Bolt-Socket Hd; (M6 X 1.0 X 20) | 2 |
| 9X***56 | Washer; (6.6x12x2-mm Thk) | 2 |
327-6550 Mirror Gp-Rear View
| 25***95 | Bracket Group-Mirror | 1 |
| 32***50 | Mirror Group-Rear View | 2 |
| 8T***40 | Bolt-Plt; (M16 X 2.0 X 60) | 1 |
332-1729 Mirror Gp-Rear View -With Front Guard
| 32***50 | Mirror Group-Rear View | 1 |
| 33***29 | Mirror Group-Rear View; -With Front Guard | 1 |
| 34***75 | Bracket Group-Mirror | 1 |
221-8813 Monitor & Mtg Gp-Operator
| 14***36 | Pin-Connector; (14-Ga To 18-Ga) | 17 |
| 22***13 | Monitor & Mtg Group-Operator | 1 |
| 24***94 | Receptacle As-Connector; (12-Pin) | 1 |
327-7482 Monitor Gp-Operator
| 32***82 | Monitor Group-Operator | 2 |
| 34***10 | Software Group-Monitor | 1 |
349-5408 Monitor Gp-Operator
| 34***08 | Monitor Group-Operator | 1 |
277-9130 Motor Gp-Window Wiper
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
| 19***10 | Cap-Wiper | 2 |
330-5054 Motor Gp-Window Wiper
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 7 |
| 16***74 | Louver As-Vent | 2 |
| 23***72 | Cover | 1 |
225-5765 Mounting Gp-Cab -Rear
| 05***71 | Grommet-Junction Box | 1 |
| 09***41 | Screw; (Machine) (M6x1thd) | 4 |
| 11***29 | Washer; (6.6x22x2-mm Thk) | 4 |
309-4886 Mounting Gp-Monitor -Machine Stability
| 23***62 | Mount As | 4 |
| 25***10 | Floor Mat | 1 |
| 30***86 | Mounting Group-Monitor; -Machine Stability | 1 |
245-7811 Mounting Gp-Platform
| 17***97 | Control Group-Pilot Operated Hydraulic; -Travel | 1 |
| 22***65 | Mounting Group-Cab; -Rear | 1 |
| 24***11 | Mounting Group-Platform | 1 |
359-3472 Operator Ar
| 25***26 | Fastener Group-Wiring Harness; -Straight Travel | 1 |
| 25***43 | Lines Group-Pilot; -Third Pedal, Pilot Valve | 1 |
| 25***44 | Lines Group-Pilot; -Control Valve, Travel Valve | 1 |
284-2246 Operator Ar
| 17***97 | Control Group-Pilot Operated Hydraulic; -Travel | 1 |
| 22***65 | Mounting Group-Cab; -Rear | 1 |
| 24***22 | Console Group-Operator | 1 |
259-7176 Pedal Ar-Auxiliary -Third Pedal, Straight Travel
| 25***26 | Fastener Group-Wiring Harness; -Straight Travel | 1 |
| 25***43 | Lines Group-Pilot; -Third Pedal, Pilot Valve | 1 |
| 25***76 | Pedal Ar-Auxiliary; -Third Pedal, Straight Travel | 1 |
356-2349 Pedal Ar-Third -Straight Travel
| 08***97 | Washer; (13x50x6-mm Thk) | 2 |
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
| 09***33 | Seal Stk Link, Bkt Link & Cyl | 4 |
259-2801 Platform Gp-Cab Tilt
| 13***65 | Grommet | 1 |
| 13***66 | Grommet | 1 |
| 16***49 | Cover | 2 |
263-6277 Platform Gp-Operator
| 10***04 | Screw As; (M5x0.8x10-mm) | 2 |
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 2 |
| 23***60 | Cable | 1 |
263-9088 Radio Gp-Communication -Product Link 121sr
| 26***88 | Radio Group-Communication; -Product Link 121sr | 1 |
| 33***66 | Software Group-Communication; (Product Link 121sr) | 1 |
336-3545 Radio Gp-Communication -Product Link 121sr
| 16***42 | Connector; (Receptacle) | 1 |
| 16***43 | Terminal; (Male) | 4 |
| 23***11 | Switch As-Rocker; (Heated Seat) | 1 |
327-6503 Seat & Mounting Gp -High Back, With Heater
| 32***03 | Seat & Mounting Group; -High Back, With Heater | 1 |
| 32***41 | Seat Belt Group; (Retractable, 43-mm) | 1 |
305-0467 Seat Belt Gp -Retractable, 43-Mm
| 17***59 | Handle; (Lumbar Support Adjuster) | 1 |
| 30***67 | Seat Belt Group; -Retractable, 43-mm | 1 |
| 31***87 | Bracket | 2 |
327-6513 Seat Gp -High Back, With Heater
| 31***87 | Bracket | 2 |
| 32***13 | Seat Group; -High Back, With Heater | 2 |
| 32***21 | Suspension Group-Seat; -Air | 1 |
327-6509 Seat Gp-Suspension -High Back, With Heater
| 32***09 | Seat Group-Suspension; -High Back, With Heater | 1 |
| 32***38 | Support As-Seat | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
327-6523 Support Gp-Seat
| 32***23 | Support Group-Seat | 1 |
| 32***44 | Kit-Bracket; (Console Raise, Lower) | 1 |
| 32***48 | Kit-Adjuster; (Seat Position) | 1 |
327-6521 Suspension Gp-Seat -Air
| 18***57 | Angle As | 1 |
| 18***60 | Rod | 1 |
| 32***21 | Suspension Group-Seat; -Air | 1 |
284-3877 Tank Gp-Window Washer
| 23***33 | Wiper Group-Window; -Front Window, 1-Piece | 1 |
| 24***11 | Mounting Group-Platform | 1 |
| 25***01 | Platform Group-Cab Tilt | 1 |
355-5672 Tilt Ar-Cab
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 8 |
| 16***46 | Cup | 1 |
| 16***55 | Panel-Switch; (Operator Console) | 1 |
249-2664 Trim Gp-Cab -Interior, Front
| 09***80 | Tape - Color; (Blue) | 1 |
| 09***82 | Tape-Color; (Yellow) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
355-8754 Washer Gp-Window
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 1 |
| 16***83 | Bracket | 8 |
| 19***57 | Bracket | 2 |
274-5098 Washer Gp-Window
| 09***80 | Tape - Color; (Blue) | 2 |
| 09***82 | Tape-Color; (Yellow) | 2 |
| 14***95 | Hose; (650-cm Each) | 0 |
265-5458 Window Gp-Cab -Rear, Side, Top Windows
| 26***58 | Window Group-Cab; -Rear, Side, Top Windows | 1 |
| 28***62 | Frame | 1 |
| 28***63 | Seal | 1 |
260-1735 Window Gp-Cab -High Resistant Glass
| 10***89 | Rivet-Pop | 2 |
| 13***14 | Hammer Group | 1 |
| 14***97 | Strip | 1 |
286-8861 Window Gp-Door
| 14***95 | Hose; (650-cm Each) | 0 |
| 19***18 | Blade As-Wiper; (Twin Blade) | 1 |
| 21***56 | Fitting | 1 |
259-8891 Wiper Gp-Window -Top
| 01***16 | Setscrew; (8-32x0.5-In) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
239-3433 Wiper Gp-Window -Front Window, 1-Piece
| 01***16 | Setscrew; (8-32x0.5-In) | 1 |
| 12***95 | Plug | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
Power Train
353-0499 Drive Gp-Final -With Motor, Sprocket
| 09***31 | Ring - Retaining | 1 |
| 09***77 | Plate (7.0 mm Thick) | 1 |
| 09***78 | Plate (8.0 mm Thick) | 1 |
296-6217 Final Drive Gp -With Motor
| 09***91 | Screw-Machine; (M5x0.8x35-mm) | 2 |
| 11***26 | Housing-Plug | 1 |
| 11***28 | Seal | 2 |
296-6218 Drive Gp-Final -Without Motor
| 19***06 | Motor & Mtg Group-Travel | 1 |
| 29***18 | Final Drive Group; -Without Motor | 2 |
191-2576 Power Train Ar
| 16***27 | Sprocket Group | 2 |
| 19***76 | Power Train Ar | 1 |
| 19***77 | Fastener Group-Swing & Final Dr | 1 |
168-6727 Sprocket Gp
| 16***27 | Sprocket Group | 1 |
| 6Y***85 | Sprocket; (Track) | 1 |
| 7X***75 | Bolt; (M24x3x60-mm) | 16 |
Service Equipment And Supplies
298-4258 Film Gp -Fuel Transfer Pump
| 23***63 | Film-Identification; (Smartboom) | 1 |
| 26***44 | Film-Warning; (Boom Float) | 1 |
| 29***58 | Film Group; -Fuel Transfer Pump | 1 |
298-4341 Film Gp -Smartboom
| 29***41 | Film Group; -Smartboom | 1 |
| 31***52 | Film-Instruction; (Battery Life, Camera) | 1 |
303-2787 Film Gp -Work Area Visual System, Rear
| 13***58 | Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap) | 1 |
| 14***47 | Film; (Identification) (24v) (On Outside Of Battery Compartment Door) | 1 |
| 16***70 | Film; (No Step) | 1 |
285-8547 Film Gp -Adj Gauge Undercarriage
| 28***47 | Film Group; -Adj Gauge Undercarriage | 1 |
| 30***72 | Film-Warning; (Explosion Hazard, Read Omm) | 1 |
268-6816 Film Gp -Quick Coupler
| 22***30 | Film-Warning; (Flying Debris, Stay Back, U.S.) | 1 |
| 22***31 | Film-Warning; (Flying Debris, Stay Back, Intl) | 1 |
| 26***16 | Film Group; -Quick Coupler | 1 |
247-7410 Film Gp -Operator Controls, Notice
| 24***10 | Film Group; -Operator Controls, Notice | 1 |
| 26***17 | Film-Identification; (Quick Coupler) | 1 |
275-3812 Film Gp -Fan, Flying Debris
| 14***93 | Film-Instruction; (Variable Track Gauge) | 1 |
| 27***12 | Film Group; -Fan, Flying Debris | 1 |
359-7480 Plate & Film Gp
| 35***80 | Plate & Film Group | 1 |
Undercarriage
297-9151 Adjustment Gp-Hydraulic Track
| 09***27 | Valve-Fill; (Track Tension Cylinder) | 1 |
| 11***24 | Plate As. | 1 |
| 11***25 | Plate | 1 |
283-1422 Frame Ar-Undercarriage
| 17***53 | Roller Ar-Track & Carrier | 1 |
| 19***02 | Guard Group-Track Guide; -Center | 1 |
| 23***20 | Idler Group-Front | 1 |
352-3374 Frame Ar-Undercarriage
| 17***53 | Roller Ar-Track & Carrier | 1 |
| 19***02 | Guard Group-Track Guide; -Center | 1 |
| 23***20 | Idler Group-Front | 1 |
270-3146 Frame Gp-Carbody -Adjustable Gauge
| 15***06 | Bolt-Hex Socket; (M10x1.5x25mm) | 160 |
| 25***68 | Block | 2 |
| 27***45 | Frame As-Carbody | 1 |
270-4785 Frame Gp-Track Roller -Adjustable Gauge, Rh
| 11***72 | Bracket | 2 |
| 15***06 | Bolt-Hex Socket; (M10x1.5x25mm) | 80 |
| 27***83 | Frame As-Track Roller; (Adjustable Gauge, Rh) | 1 |
270-4786 Frame Gp-Track Roller -Adjustable Gauge, Lh
| 11***72 | Bracket | 2 |
| 15***06 | Bolt-Hex Socket; (M10x1.5x25mm) | 80 |
| 27***84 | Frame As-Track Roller; (Adjustable Gauge, Lh)(Lh) | 1 |
270-3147 Frame Gp-Undercarriage -Adjustable Gauge Undercarriage
| 11***96 | Pin As | 4 |
| 12***21 | Cylinder Group-Undercarriage; -Adjustable Gauge | 2 |
| 27***46 | Frame Group-Carbody; -Adjustable Gauge | 1 |
270-3149 Guard Gp-Track Guide -Adjustable Gauge Undercarriage
| 14***94 | Cover As | 2 |
| 27***26 | Plate | 4 |
| 27***28 | Plate As | 2 |
189-3860 Guard Gp-Track Guide -Full Length
| 10***24 | Support As | 16 |
| 14***48 | Bolt-Hex Head; (M24x3x350mm) | 16 |
| 18***60 | Guard Group-Track Guide; -Full Length | 1 |
192-8302 Guard Gp-Track Guide -Center
| 19***02 | Guard Group-Track Guide; -Center | 1 |
| 19***03 | Guard As-Track Guide | 2 |
| 8T***67 | Washer-Hard; (26x44x4-mm Thk) | 8 |
241-7335 Guard Gp-Travel Motor -Heavy-Duty
| 24***35 | Guard Group-Travel Motor; -Heavy-Duty | 1 |
| 24***36 | Cover As-Access; (Lh) | 1 |
| 24***37 | Cover As-Access; (Rh) | 1 |
241-7333 Guard Gp-Travel Motor
| 24***33 | Guard Group-Travel Motor | 1 |
| 24***34 | Plate | 2 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 10 |
136-2422 Idler Gp-Front
| 10***81 | Seal Group-Duo-Cone | 2 |
| 11***99 | Bearing; (Front Idler) | 2 |
| 13***22 | Idler Group-Front | 1 |
239-4321 Idler Gp-Front
| 13***22 | Idler Group-Front | 1 |
| 23***21 | Idler Group-Front | 1 |
| 23***22 | Spring Group-Recoil | 1 |
239-4320 Idler Gp-Front
| 23***20 | Idler Group-Front | 1 |
| 23***21 | Idler Group-Front | 2 |
| 29***51 | Adjustment Group-Hydraulic Track | 2 |
213-1971 Link As-Track -Grease Lubricated
| 17***26 | Seal; (Track) | 96 |
| 17***28 | Seal-Track Master | 2 |
| 20***28 | Bushing-Track Master | 1 |
201-9119 Link As-Track
| 09***44 | Pin; (Cotter) | 1 |
| 11***02 | Link-Track Master; (Rh) | 1 |
| 11***03 | Link-Track Master; (Lh) | 1 |
270-3148 Lock Gp-Transport -Adjustable Gauge Undercarriage
| 27***48 | Lock Group-Transport; -Adjustable Gauge Undercarriage | 1 |
| 27***71 | Plate | 2 |
| 5P***37 | Pin (Lock) | 2 |
176-4853 Roller Ar-Track & Carrier
| 17***53 | Roller Ar-Track & Carrier | 1 |
| 17***86 | Roller Group-Track-Single Flange | 18 |
| 6Y***23 | Roller Group-Track Carrier | 4 |
239-4352 Roller Ar-Track & Carrier
| 18***74 | Roller Group-Track-Single Flange | 18 |
| 23***52 | Roller Ar-Track & Carrier | 1 |
| 6Y***23 | Roller Group-Track Carrier | 4 |
6y-5323 Roller Gp-Track Carrier
| 17***92 | Seal Group-Duo-Cone | 1 |
| 1M***97 | Ring-Sealing | 1 |
| 5H***48 | Seal (Part Of 5d***19 Assem.) | 1 |
183-2874 Roller Gp-Track-Single Flange
| 14***33 | Seal Group-Duo Cone; (Duo Cone) (151page) | 2 |
| 16***31 | Ring; (Toric) | 2 |
| 17***97 | Collar; (Track Roller) | 2 |
179-1486 Roller Gp-Track-Single Flange
| 14***33 | Seal Group-Duo Cone; (Duo Cone) (151page) | 2 |
| 16***31 | Ring; (Toric) | 2 |
| 17***86 | Roller Group-Track-Single Flange | 1 |
239-4322 Spring Gp-Recoil
| 17***37 | Washer; (62x105x10-mm Thk) | 1 |
| 17***38 | Nut; (M56x5.5-Thd) | 1 |
| 17***40 | Strip | 1 |
203-0861 Track Gp -2-Required, Heavy-Duty
| 12***41 | Shoe-Track | 49 |
| 20***19 | Link As-Track; (Track) (15page) | 1 |
| 20***61 | Track Group; -2-Required, Heavy-Duty | 1 |
347-2346 Track Gp -2-Required
| 12***40 | Shoe-Track | 49 |
| 21***71 | Link As-Track; -Grease Lubricated | 1 |
| 31***50 | Nut-Track; (M22x1.5-Thd) | 196 |
203-0860 Track Gp -2-Required
| 12***40 | Shoe-Track | 49 |
| 20***19 | Link As-Track; (Track) (15page) | 1 |
| 20***60 | Track Group; -2-Required, Heavy-Duty | 1 |
347-2461 Track Gp -2-Required, Heavy-Duty
| 12***41 | Shoe-Track | 49 |
| 21***71 | Link As-Track; -Grease Lubricated | 1 |
| 31***50 | Nut-Track; (M22x1.5-Thd) | 196 |
336D serial number reference
The PIN plate on an OEM Solutions power unit is riveted to the main frame or skid rail, usually near the pump drive end or control panel, not on a cab or ROPS since these units have neither. Read the first 3 characters as the serial prefix (identifies the specific build/serial break), followed by an 8-digit sequence number on post-2001 17-character PINs; older units used a shorter 8-character serial with the same 3-letter prefix logic.
| Prefix | Identifies | Notes |
|---|---|---|
| PKN | 336 MHPU (OEM Solutions Mobile Hydraulic Power Unit) | Confirm with dealer. One parts-manual listing ties PKN to the 336 MHPU line. Engine not stated on that listing. |
| M3M | 336D and 336D L Mobile Hydraulic Power Unit, C9 engine | Confirm with dealer. Manual header reads 336D and 336D L Mobile Hydraulic Power Units M3M00001-and-up, powered by the C9 engine. The manual bundles bare 336D and 336D L configurations under one serial break, so this is not purely excavator data. |
| M3N | 336D and 336D L Mobile Hydraulic Power Unit, C9 engine | Confirm with dealer. Manual header reads 336D and 336D L Mobile Hydraulic Power Units M3N00001-and-up, powered by the C9 engine, same pattern as M3M. |
Frequently asked questions
What engine does the Caterpillar 336D OEM Solutions Mobile Hydraulic Power Unit use?
It runs the Cat C9 ACERT, a turbocharged, air-to-air aftercooled inline-six diesel rated at 209 kW (280 hp) gross and roughly 198-200 kW (266-268 hp) net flywheel power. Factory documentation for this power-unit build ties the C9 directly to the 336D and 336D L MHPU line, the same engine family used in the standard 336D excavator this carrier is built from.
What is the operating weight of the 336D MHPU?
Caterpillar has not published a standalone operating weight for the bare power-unit build. The 336D/336D L excavator chassis it is built from runs about 34,500 kg (76,035 lb) on the standard undercarriage up to roughly 37,050-37,630 kg (81,761-82,962 lb) on a long/LC undercarriage, but the MHPU carries no boom, stick, or bucket, so actual curb weight runs lighter than those figures. Confirm exact weight with a dealer quote for the specific build.
What replaced the Caterpillar 336D OEM Solutions Mobile Hydraulic Power Unit?
Caterpillar carried the MHPU/frontless-carrier concept forward into the following 336E platform, which runs the Cat C9.3B engine in place of the C9 ACERT. No source documents a formal discontinuation date or a separately named replacement for this specific D-series build, so the 336E-generation MHPU is the closest documented successor.
What 336D owners discuss
This 336D unit is an OEM Solutions Mobile Hydraulic Power Unit, not a standard excavator. Does that change what field experience applies?
Yes. This configuration drops the standard 336D/336D L excavator front end and cab and keeps the undercarriage, house, engine and hydraulic pump package as a bare power source for a third-party attachment or system. There is very little dedicated field chatter on the MHPU variant itself since it is a low-volume OEM product. What does carry over directly is anything tied to the shared platform: the C9 engine, the main hydraulic pumps, swing/travel drive, and undercarriage. Boom, stick and bucket complaints from standard 336D excavator threads do not apply here since this unit has none of that linkage. Treat engine and hydraulic notes below as shared-platform experience, not MHPU-specific anecdotes.
What do owners and techs say about the C9 ACERT engine's real-world reliability?
Overall it is regarded as a durable, serviceable industrial diesel, but with a few recurring quirks. Injectors are noted as sensitive to fuel contamination; even light debris in the fuel system leads to gradual power loss, and injectors are a common wear item over long service life. Leaking injector seals show up as a diesel smell near the valve cover and a drop in fuel economy as the seals harden with age. Reports of piston ring wear and cylinder liner scoring under sustained heavy load also come up, usually tied to lubrication upkeep and soot buildup rather than a design flaw. Keep fuel filtration tight and stick to the oil-change interval and this engine generally goes the distance.
There are reports of the C9 engine running hot on this chassis. What is usually behind that?
Coolant temperatures climbing toward 98-104°C (208-219°F) within an hour of operation, sometimes with a power derate, show up more than once in the field. Root causes reported include a loose or slipping belt, and radiator/hydraulic-oil-cooler cores clogged with debris even after the water pump and thermostat had already been replaced. Airflow blockage from dust or field debris and a plugged cooling package are the first things to rule out before assuming an internal engine fault. Because sustained overheating can trigger a derate or engine shutdown mid-cycle, have your dealer verify cooling system airflow and belt tension before returning the unit to full-duty service.
Owners report the hydraulics feel weak until more than one function is used at once. Is that a pump problem?
Not necessarily. On this pump architecture, weak swing or travel response that firms up once a second function is engaged is a known symptom of a sticking or bypassing resolver (shuttle) valve rather than a worn main pump. The resolver network is supposed to pass the highest working pressure among active functions back to the pump so it strokes up to meet demand; if it hangs up, the pump never gets the signal to increase flow. Checking resolver valves and signal lines before condemning a main pump saves a lot of unnecessary teardown. Reported hydraulic oil temperatures on this platform stay reasonable even in hot ambient conditions when the cooling package is clean, so persistent overheated, contaminated-looking oil points more toward a cooler or filtration issue than normal operation.
What undercarriage and swing/travel drive wear patterns are typical for a chassis this size?
This weight class of Cat crawler undercarriage is built with thicker track links and larger-diameter roller shafts specifically to resist bolt loosening, bending and oil leaks under heavy duty cycles, with sealed pin-bushing joints to keep grease in and debris out. Even so, shoe separation (pins working loose) is called out as an early warning sign to watch for, along with sprocket bending or cracking on the final drive and worn or damaged track hardware. On the swing/travel motor side, elevated case drain pressure when multiple functions run together, or case drain flow exceeding roughly a liter per minute, points to a worn rotating group inside the motor; failed drain-line seals can also pressurize the motor and mimic that same symptom. Because a failing swing or travel motor can behave unpredictably under load, have your dealer verify case drain pressure and seal condition before relying on it for production work.
What electrical or sensor issues come up most on this engine and pump platform?
Faulty sensors are a recurring complaint on ACERT-era Cat machines generally; a bad sensor reading can mask what is really happening with the engine or hydraulic system, so multimeter verification of the sensor itself is often the first diagnostic step rather than chasing the symptom it reports. Wiring harness insulation breakdown is also reported on machines of this era and duty cycle, to the point that insulation can be brittle enough that light contact strips it and exposes bare copper, risking a short circuit. Since a chafed harness near the pump or engine harness can cause an intermittent short or unexpected shutdown, have your dealer verify harness condition and insulation integrity, especially around pump wiring and sensor connectors, before extended field use.
What should a buyer check before purchasing a used 336D-based unit like this?
Start with the engine: look for oil leaks at the block, listen for knocking or ticking, and watch startup and running exhaust for excess black, gray or white smoke, which can point to injector or ring wear. Run every hydraulic function and check for external leaks, sluggish response, or a function that only comes alive once a second function is engaged, since that pattern often traces to a resolver valve rather than the pump. On the undercarriage, look for shoe separation, worn or bent sprockets, and check case drain behavior on the swing and travel motors if a flow test is possible. Inspect the wiring harness for brittle or chafed insulation, particularly near the engine and pump compartment. Pull service records if available; frame condition, weld integrity, and consistent maintenance history matter as much on this power-unit configuration as on the standard excavator chassis it is built from. Given the mix of engine, hydraulic and undercarriage variables, have your dealer verify overall machine condition and run hours against service history before finalizing purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Caterpillar 336D. Related factory variants of the same model family:
336D
Need a specific 336D part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.