Caterpillaroem solutionsmobile hyd power unit
Caterpillar 325D
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 325D is a mid-size (roughly 20-30 tonne class) hydraulic crawler excavator built around the Cat C7 engine with ACERT Technology, a turbocharged-aftercooled six-cylinder diesel rated at approximately 142 kW (190 hp) net and 152 kW (204 hp) gross flywheel power to meet U.S. EPA Tier 3/EU Stage IIIA emissions. Operating weight runs roughly 26.9 to 29.24 metric tons (about 59,300 to 64,460 lb) per Cat Specalog figures, varying with undercarriage length, track shoe width, boom/stick combination, and counterweight. It followed the 325C in the mid-2000s and remained in the Cat lineup into the mid-2010s before being succeeded by the Tier 4 Interim 325F. Caterpillar offered the 325D across long (L) and narrow/long (LN) undercarriage variants plus reach and mass-excavation boom/stick/bucket packages, with demolition, forestry/log-loader, and other factory-configured options built on the same base machine.
Compared with the 325C it replaced, the 325D introduced the C7 ACERT engine (about 12% more horsepower than the prior 3126B HEUI engine), an ADEM A4 electronic control module for more precise fuel mapping, and a cross-roller swing bearing in place of the earlier ball-bearing design for better stability under high swing torque. These changes, along with extended service intervals and ground-level S·O·S sampling access, set the template Caterpillar carried into the following 325F and current-generation 325 platforms. In today's used and parts market, the 325D remains significant because it predates DEF/SCR aftertreatment entirely, giving it a simpler, often lower-cost-to-maintain powertrain that many owners and rebuilders still prefer; its large installed base, shared D-series architecture with sibling excavators, and mature aftermarket for undercarriage, hydraulic, and final drive components keep it a steady source of parts demand and rebuild work.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 325D specifications
Engine
| Engine model | Cat C7 with ACERT Technology (inline 6-cylinder diesel) — used across both the 325D (standard undercarriage) and 325D L (long undercarriage) configurations |
| Net power (early production, single-rating) | 152 kW (204 hp) net flywheel power at 1800 rpm; ISO 9249: 152 kW (204 hp); SAE J1349: 151 kW (202 hp); EEC 80/1269: 152 kW (204 hp) |
| Net power (later production, selectable power) | Standard power 140 kW (188 hp); optional High Power (Power Management) 152 kW (204 hp) net flywheel/ISO 9249 — power rating varies by series/build and is operator-selectable in later machines |
| Displacement | 7.2 L (440 in³) |
| Bore x stroke | 110 mm x 127 mm (4.3 in x 5 in) |
| Emissions certification | Varies by series: earlier documentation states compliance with U.S. EPA Tier 3 and EU Stage III; later combined 325D/325D L documentation states compliance equivalent to former U.S. EPA Tier 2 and EU Stage II — reflects different production/market variants |
| Altitude capability | No engine derating required up to 2300 m (7,500 ft) |
Weights
| Operating weight — standard undercarriage (325D) | 26,900 kg (59,300 lb), reference config: reach boom, R3.2CB2 (10 ft 6 in) stick, 1.1 m³ (1.44 yd³) bucket, 600 mm (24 in) shoes |
| Operating weight — long undercarriage (325D L) | 29,240 kg (64,460–64,500 lb across sources), reference config: reach boom, R3.2CB2 (10 ft 5 in) stick, 1.1 m³ (1.44 yd³) bucket, 800 mm (32 in) shoes |
| Base machine with counterweight (without front linkage), 600 mm shoes | 21,620 kg (47,663 lb) |
| Standard counterweight | 5,410 kg (11,927 lb) |
| Ground pressure | Not published in available official spec sheets for this model; not verifiable from cross-checked sources |
Dimensions
| Shipping/transport height (varies by boom/stick option) | approx. 3,130–3,250 mm (10'3"–10'8"); up to 3,632 mm (11'11") with the longest reach stick option |
| Shipping/transport length (varies by boom/stick option) | approx. 9,800–10,420 mm (32'2"–34'2") for reach/mass boom configurations; Super Long Reach boom configuration (325D L only): 14,380 mm (47'2") |
| Tail swing radius | 3,080 mm (10'1") |
| Transport/shipping width — standard undercarriage | 2,990 mm (9'10") with 600 mm (24 in) shoes |
| Transport/shipping width — long undercarriage | 3,190 mm (10'6") with 600 mm shoes; 3,290 mm (10'10") with 700 mm shoes; 3,390 mm (11'1") with 800 mm shoes (standard) |
| Track gauge — standard undercarriage | 2,390 mm (7'10") |
| Track gauge — long undercarriage | 2,590 mm (8'6") |
| Length to center of rollers — standard / long undercarriage | 3,490 mm (11'5") standard; 3,990 mm (13'1") long |
| Track length — standard / long undercarriage | 4,360 mm (14'4") standard; 4,860 mm (15'11") long |
| Ground clearance | 490 mm (1'7") — same for standard and long undercarriage |
| Cab height | 3,040 mm (10'0") |
| Counterweight clearance | 1,110 mm (3'8") |
Performance
| Maximum travel speed | 5.3 km/h (3.3 mph) — machine is equipped with two-speed auto-shift travel |
| Swing speed | 10.2 rpm |
| Swing torque | 82.2 kN·m (60,628 lb ft) |
| Maximum drawbar pull | 249 kN (55,977 lb) |
| Bucket digging force (ISO), by configuration | varies by boom/stick/bucket configuration, approx. 179–239 kN (40,241–53,729 lb); reach-boom configurations typically around 188–201 kN (42,000–45,200 lb), mass-boom configurations up to 239 kN (53,729 lb) |
| Stick digging force (ISO), by configuration | varies by configuration, approx. 118–162 kN (26,500–36,400 lb) |
| Maximum digging depth, by boom/stick configuration | varies from approx. 6.0–7.8 m (19'9"–25'8") for reach/mass boom configurations, up to 14.62 m (48'0") with the Super Long Reach boom (325D L only) |
| Maximum reach at ground level, by boom/stick configuration | varies from approx. 9.3–11.15 m (30'8"–36'7") for reach/mass boom configurations, up to 18.6 m (61'0") with the Super Long Reach boom (325D L only) |
| Gradeability | Not published in available official spec sheets for this model |
Service capacities (summary)
| Fuel tank | 520 L (137 gal) |
| Hydraulic system (including tank) | 310 L (82 gal); hydraulic tank alone: 145 L (38 gal) |
| Engine oil | 30 L (7.9 gal) |
| Cooling system | 30 L (7.9 gal) |
| Swing drive | 10 L (2.6 gal) |
| Final drive (each) | 6 L (1.6 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
325D fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) - Cat C7 ACERT diesel | approx. 29.9-30 L (7.9 US gal) | Cat DEO or Cat DEO-ULS Multigrade Diesel Engine Oil (Cat DEO SYN also acceptable). Per Cat's official Machine Fluids Recommendations viscosity chart, SAE 10W-30 is the preferred grade for the C7 engine family between -18C/0F and 40C/104F; SAE 15W-40 for warmer/general use up to 50C; colder climates step down through SAE 5W-30, 5W-40, 0W-30, 0W-40 or 0W-20 as ambient drops toward -40C. Commercial oils meeting Cat ECF-1-a, ECF-2 or ECF-3 are acceptable alternatives. |
| Cooling system | approx. 29.9-30 L (7.9 US gal) | Cat ELC (Extended Life Coolant), preferred - supplied as a 1:1 premix with water giving freeze protection to about -37C (-34F); rated for roughly 12,000 service hours or six years (with Cat ELC Extender added at the mid-life point). Cat DEAC (Diesel Engine Antifreeze/Coolant) is the acceptable alternative, good for about 3,000 hours or three years. Minimum 30 percent glycol content is specified. |
| Fuel tank | approx. 518-520 L (137-137.4 US gal) | Diesel fuel meeting Cat's diesel fuel specification (ultra-low-sulfur No. 2-D grade typical for Tier 3-era C7 engines); this is a fuel-quality spec rather than a branded lubricant. |
| Hydraulic system (tank plus lines/cylinders - single refill-capacity line item on the OEM spec sheet, tank-only sub-figure not separately published in verifiable sources) | approx. 310.3-310.5 L (82 US gal) total system | Cat HYDO Advanced 10 (SAE 10W), preferred for most ambient conditions between about -20C and 40C (-4F to 104F); Cat HYDO (available in SAE 5W-30 and other grades) and Cat TDTO/Cat DEO (TO-4 spec oils) are also listed as acceptable for hydraulic excavator hydraulic and swing-motor/travel-motor systems. Cold climates use lower grades such as SAE 0W-20/0W-30 (down to about -40C); hot climates use heavier grades up to about SAE 30. |
| Swing drive (swing mechanism gear case) | approx. 9.8-9.9 L (2.6 US gal) | Cat TDTO (Transmission/Drive Train Oil) meeting the Cat TO-4 specification, per the OEM final-drive/swing-drive viscosity table for track-type hydraulic excavators. SAE 10W is typical for roughly -25C to 25C; SAE 30 or SAE 50 for hotter climates (up to about 50C); Cat Arctic TDTO or Cat TDTO-TMS (synthetic blend) for cold climates down to about -40C. |
| Final drive, each track (two total) | approx. 6.1 L (1.6 US gal) per side | Cat TDTO (TO-4 spec), same oil family and viscosity-by-temperature guidance as the swing drive (SAE 10W for moderate climates, SAE 30/50 for hot, Cat Arctic TDTO/TDTO-TMS for cold down to about -40C). |
| Grease (all pin, bushing, linkage, swing-gear and swing-bearing lubrication points) - spec only, no single fill-capacity figure applies | n/a (applied via grease gun to individual points, not a bulk-fill compartment) | Cat Advanced 3Moly Grease (NLGI grade 2, lithium-complex base with about 3% molybdenum disulfide) is Caterpillar's recommendation for heavily loaded pin joints and linkages on excavators; Cat Multipurpose Grease (NLGI grade 2, lithium complex, no moly) is the acceptable general-purpose alternative where severity is lower. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 325D maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 6,000 h |
|
| Every 12,000 h |
|
Servicing the 325D beyond the schedule
Predictive Maintenance & Fluid Analysis
The 325D's C7 ACERT engine, hydraulic system, and coolant circuit all sample through ground-level S·O·S ports built into the upper structure, so wear-metal trends from the swing bearing, final drives, and main pump can be caught before failure. Pull engine oil samples near 250 hours, hydraulic and swing drive oil samples near 500 hours, and a coolant sample annually. Running genuine filters with disciplined S·O·S monitoring is what lets owners safely stretch the engine oil interval toward 1,000 hours.
Corrective & Common Repairs
Typical 325D repairs center on the C7 ACERT's injectors, turbocharger, and ADEM A4 control module, plus seal leakage at the tightly packaged main pump and control valve. The capsule-style hydraulic return filter is a frequent clog point outside the tank. High swing torque wears the cross-roller swing bearing and gear, while the long/wide L undercarriage sees steady roller, idler, and sprocket wear. Dealers commonly structure engine and final drive repairs in tiers, from in-frame seal/bearing work up to full remanufacture.
Overhaul & Rebuild Points
Major 325D rebuild work targets the C7 ACERT block, head, and fuel/turbo system once compression or oil consumption trends drift, along with the swing drive gearbox and cross-roller bearing that absorb the machine's high swing torque. Each final drive and travel motor is typically overhauled independently. Main hydraulic pump and control valve rebuilds follow measurable flow or pressure loss. On the long undercarriage, complete roller/idler/sprocket/chain replacement plus boom and stick pin-bushing reboring mark the second-life milestone.
Seasonal & Environment Servicing
In cold climates, confirm minimum glycol concentration in the C7's cooling system, use the jacket water heater, and follow disciplined ether-start procedure rather than over-relying on it. In hot, dusty sites, clean the double-element air filter and the radiator/oil cooler/aftercooler cores behind the cab-side layout more often than the standard interval. Hammer and demolition duty cycles shorten hydraulic filter and oil-change intervals per the partial/continuous-hammer-use tables, and wet or muddy sites call for more frequent undercarriage washouts and track-tension checks.
325D common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 1R-0762 | Filter As-Fuel | Fuel system service | Check fitment → |
| 220-8678 | Seal-Ring | Fuel system service | Check fitment → |
| 326-1644 | Filter As-Water Sep & Fuel | Fuel system service | Check fitment → |
| 132-7165 | Filter Element As-Air | Air intake service | Check fitment → |
| 4I-1278 | Filter Element-Cab Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
325D fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| CID 110-03 / 110-04 (Engine Coolant Temperature Sensor, voltage high/low) | Engine ECM (MID 36) sees the coolant temperature sensor signal voltage outside its valid range — FMI 03 is voltage above normal, FMI 04 is voltage below normal — which flags a circuit/sensor fault rather than a confirmed overheat condition. | Failed sensor element, corroded or damaged connector, or chafed/open harness wiring on the sensor signal circuit. | Inspect the sensor connector and wiring for corrosion or damage, check sensor voltage/resistance against the ECM's spec, and replace the sensor if it is out of range. |
| CID 100-03 / 100-04 (Engine Oil Pressure Sensor, voltage high/low) | ECM detects the oil pressure sensor signal outside the expected voltage range (03 = above normal, 04 = below normal), indicating a wiring or sensor problem rather than a confirmed loss of oil pressure. | Sensor failure, open or shorted signal circuit, or a corroded connector. | Confirm actual oil pressure with a mechanical gauge first, then inspect sensor wiring/connector and replace the sensor if it tests out of spec. |
| CID 274-03 / 274-04 (Atmospheric Pressure Sensor, voltage high/low) | ECM detects an out-of-range voltage signal from the barometric/atmospheric pressure sensor used in fuel and boost trim calculations; this is a standard CID/FMI pairing on Cat ADEM-controlled diesels including the C7 used in the 325D. | Sensor fault, damaged harness, or connector corrosion. | Check sensor wiring and connector condition, verify sensor supply voltage, and replace the sensor if it does not read within specification. |
| CID 190-08 (Engine Speed/Timing Sensor, abnormal signal) | ECM is not receiving a clean, steady speed/timing signal (abnormal frequency, pulse width, or period) from the primary engine speed sensor. | Incorrect sensor air gap, a damaged sensor, wiring/connector interference, or a damaged tone ring/timing wheel. | Check and reset the sensor air gap to specification, inspect wiring and connectors for poor contact, and inspect the tone ring for damage. |
| CID 168-01 / 168-02 (Electrical System Voltage, low or erratic) | ECM's monitored battery/system voltage input is below the normal range (FMI 01) or erratic/intermittent (FMI 02), which also affects the stability of ECM supply power. | Weak or failing battery, corroded battery cables, or a loose/corroded ECM power or ground connection. | Test the battery and charging system, clean and tighten battery cables and ECM ground points, and check for voltage drop under load. |
| E198 (Low Fuel Pressure event, warning/derate levels) | Engine has detected fuel supply pressure below the level needed for normal injection operation; documented as a standard event code on Cat C7/C9-family diesel engines, with a warning level and a power-derate level. | Clogged fuel filter, air drawn into the fuel system, a weak fuel transfer pump, or a leaking fuel pressure regulator. | Check fuel level and filter condition, inspect fuel lines and fittings for air leaks or restriction, replace the fuel filter and prime the system. |
| E194 (High Exhaust Temperature, derate level) | Exhaust temperature has exceeded the normal operating threshold; this is a documented derate-level event on Cat C7/C9-family engines that triggers an automatic power reduction to protect the turbocharger and engine. | Sustained engine overload, restricted air intake or exhaust, a turbocharger problem, or an injection-timing related fault. | Check the air filter and exhaust path for restriction, reduce sustained load, inspect the turbocharger, and review related active/logged codes with Cat ET. |
| CID 1 to 6-05 / -06 (Cylinder Injector solenoid circuit, current below/above normal) | ECM detects injector solenoid driver current outside the valid range on a specific cylinder — FMI 05 (current below normal) typically points to an open circuit, FMI 06 (current above normal) typically points to a short circuit. | Damaged injector wiring harness, a failed injector solenoid, or a corroded harness connector. | Inspect the injector harness and connectors for damage or corrosion, test injector solenoid resistance/circuit continuity, and replace the injector or harness section as needed. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
325D attachments & work tools
Buckets
General duty, heavy duty, and severe duty excavator buckets are offered for the 325D class, with reference/standard capacities typically around 0.9-1.4 m³ (1.2-1.8 yd³) and maximum listed capacities near 2.0 m³ (2.6 yd³) depending on bucket width and boom/stick pairing. Mass-excavation boom/stick combinations (shorter reach) support larger buckets, while long-reach configurations trade capacity for working range.
Coupler / mounting system
The 325D is fitted on the stick with a pin-grabber quick coupler, offered in manual or hydraulic (cab-operated) form, allowing tool changes without leaving the seat. Coupler/pin hardware for this 25-ton class is commonly cited around 80-90 mm pin diameter, which also lets tools be shared with similarly sized 320-330 class excavators; exact pin sizing varies by coupler package and dealer kit.
Hydraulic breakers/hammers
Class-matched hydraulic hammers for the 325D generally fall in the roughly 125-140 mm (5-5.5 in) tool/chisel diameter range, rated for carriers in the 18-26 ton bracket, with rated flows around 120-230 l/min (32-61 gpm) and operating pressures near 13-16 MPa (1,900-2,300 psi), varying by hammer brand/model (e.g., Cat H130/H140-class performance hammers and third-party equivalents).
Shears, multi-processors and pulverizers
Multi-processor attachments with interchangeable pulverizer, shear, and secondary/tank-shear jaws are used on 325D-class machines for demolition and recycling, separating rebar from concrete or cutting angle iron, beams, pipe, cable, and rebar. These tools draw on the medium/high-pressure auxiliary hydraulic circuit rather than the base single-acting auxiliary line, so the machine needs the corresponding factory hydraulic option.
Grapples
Demolition-and-sorting grapples and continuous/full-rotation hydraulic grapples are available in this size class for scrap yards, transfer stations, and demolition sorting. A rotating hydraulic grapple sized for the 325 class shows a jaw opening near 2.3 m (roughly 90 in) and operating flow around 100-140 l/min (26-37 gpm); waste-handling shell designs increase load volume versus standard shells, and sizing varies by grapple model.
Thumbs
Hydraulic (double-acting) or mechanical pin-mounted thumbs are offered for the 25-ton class, generally matched to the same coupler/bucket pin diameter as the machine (around 90 mm cited for this class), adding gripping capability to the bucket for handling rock, stumps, and irregular debris.
Tiltrotators
Cat and third-party tiltrotators (360° continuous rotation, roughly 40° left/right tilt) supported on Cat 325-family excavators via in-cab calibration. Higher-flow attachment/tiltrotator combinations must be checked against auxiliary circuit rating. Confirm support details per unit.
Compaction attachments
Vibratory plate compactors and compaction wheels sized for the 320-330 class, which includes 325-family carriers, are offered for trench backfill and soil/asphalt compaction, powered from the excavator's auxiliary hydraulic circuit.
Auxiliary/attachment hydraulic control options
The 325D carries a standard auxiliary valve, with factory-installable attachment control packages layered on top: single-function, double-function, and a Tool Control System offered with or without an added medium-pressure/third-pump circuit. These options let the machine run one-way or two-way, one-pump or two-pump tools such as hammers, shears, grapples, pulverizers, multi-processors, and vibratory plate compactors.
Forestry configuration (325D FM)
A dedicated 325D FM forest-machine variant shares the base powertrain but adds a reinforced carbody, heavier doors, and extra guarding for logging environments, and is field-matched with third-party harvesting/processing heads (two-roller heads handling stems up to roughly 580 mm/23 in diameter have been cited) as well as forestry mulcher attachments.
Demolition guarding configuration
A demolition-oriented 325D configuration adds bolt-on Falling Object Guards (FOGS) over the cab roof and front window, with a hinged front section for window cleaning, and can substitute EN 356 P5A impact-resistant front and roof-hatch glazing for standard glass in quarry/demolition applications where flying or falling debris is a hazard.
Material handler variant (325D MH / M325D MH)
A material-handler derivative of the 325D (tracked 325D MH or wheeled M325D MH/LMH) uses the same base powertrain but a reinforced upperframe for higher swing loads, longer front linkage/boom reach, a hydraulic cab riser for elevated operator visibility, and medium/high-pressure grapple hydraulic circuits including shut-off valves at the stick end for scrap and material grapple work.
Engine and hydraulics sizing attachment capability
Sources consistently tie the 325D family to Caterpillar's C7 ACERT diesel (cited near 152 kW/204 hp, varies by rating standard), paired with a dual-pump, cross-sensing hydraulic system delivering roughly 470 l/min (124 gpm) combined implement flow at up to about 35 MPa (5,076 psi) equipment pressure; this flow/pressure headroom is what determines which hammer, shear, and grapple classes the machine can run.
Boom/stick and undercarriage variants
The 325D is offered with multiple boom/stick length combinations (reach vs. mass-excavation) that trade bucket capacity against working range, and in base, L (long/standard), and LN (narrower, reinforced undercarriage for severe underfoot conditions) chassis variants, affecting which counterweight and bucket combinations are practical for a given job.
All 325D assemblies by section
Every catalogued assembly group for the Caterpillar 325D. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
109-9405 Air Cleaner & Mounting Gp
| 10***05 | Air Cleaner & Mounting Group | 1 |
| 15***72 | Clamp As; (Compressor) | 1 |
| 16***63 | Clamp | 2 |
124-1708 Air Cleaner Gp
| 12***08 | Air Cleaner Group | 1 |
| 13***02 | Clamp As; (Turbine)(Turbine) | 1 |
| 15***72 | Clamp As; (Compressor) | 1 |
255-3053 Air Cleaner Gp
| 13***02 | Clamp As; (Turbine)(Turbine) | 1 |
| 15***72 | Clamp As; (Compressor) | 1 |
| 16***63 | Clamp | 2 |
310-9668 Air Cleaner Gp
| 25***99 | Turbocharger Group | 1 |
| 25***24 | Sleeve; (46-cm) | 0 |
| 31***68 | Air Cleaner Group | 1 |
189-8780 Cover Gp-Air Inlet -Starting Aid Heater
| 10***07 | Seal-O-Ring; (Fuel System) | 1 |
| 14***03 | Seal-O-Ring; (Fuel System) | 1 |
| 14***40 | Ring-Backup; (37.36mm Od), Flasher Switch; Hazard, Replaces 421164a1, Flasher Switch | 1 |
294-7675 Cover Gp-Air Inlet -Starting Aid Heater
| 00***64 | End; (Hose) | 2 |
| 09***86 | Clamp; (Hose) | 8 |
| 13***52 | Connector | 1 |
288-0973 Cover Gp-Air Inlet -Starting Aid Heater
| 10***07 | Seal-O-Ring; (Fuel System) | 1 |
| 14***03 | Seal-O-Ring; (Fuel System) | 2 |
| 14***40 | Ring-Backup; (37.36mm Od), Flasher Switch; Hazard, Replaces 421164a1, Flasher Switch | 1 |
231-3950 Elbow Gp-Air Inlet
| 00***64 | End; (Hose) | 2 |
| 09***86 | Clamp; (Hose) | 8 |
| 13***52 | Connector | 1 |
233-1119 Lines Gp-Air -Turbocharger, Air Cleaner
| 03***88 | Connector-Tube Assembly To Main Relief | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***74 | Elbow As | 1 |
210-8175 Lines Gp-Air -Turbocharger, Aftercooler
| 00***64 | End; (Hose) | 2 |
| 09***86 | Clamp; (Hose) | 8 |
| 13***52 | Connector | 1 |
272-4624 Lines Gp-Muffler Drain
| 00***64 | End; (Hose) | 2 |
| 09***86 | Clamp; (Hose) | 7 |
| 13***52 | Connector | 1 |
219-5840 Manifold Gp-Exhaust
| 18***99 | Connector As | 2 |
| 19***23 | Adapter Group-Oil Line; -Fuel Injection Pump-Unit Injector Hydraulic Pump | 1 |
| 20***80 | Hose As | 1 |
222-8299 Muffler Gp
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 2 |
| 22***99 | Muffler Group | 1 |
| 22***04 | Seal-O-Ring; (Unit Injector Hydraulic Pump) | 1 |
255-3051 Muffler Gp
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 2 |
| 22***04 | Seal-O-Ring; (Unit Injector Hydraulic Pump) | 1 |
| 25***51 | Muffler Group | 1 |
177-0438 Turbocharger Gp
| 17***38 | Turbocharger Group | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 2 |
| 22***04 | Seal-O-Ring; (Unit Injector Hydraulic Pump) | 1 |
254-3808 Turbocharger Gp
| 22***85 | Pump Group-Refueling | 1 |
| 23***70 | Wiring Group-Refueling Pump; -Refueling | 1 |
| 25***08 | Turbocharger Group | 1 |
177-0440 Turbocharger Gp
| 17***40 | Turbocharger Group | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 2 |
| 22***04 | Seal-O-Ring; (Unit Injector Hydraulic Pump) | 1 |
250-7696 Turbocharger Gp
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 2 |
| 22***04 | Seal-O-Ring; (Unit Injector Hydraulic Pump) | 1 |
| 25***96 | Turbocharger Group | 1 |
250-7699 Turbocharger Gp
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
| 22***04 | Seal-O-Ring; (Unit Injector Hydraulic Pump) | 1 |
| 25***99 | Turbocharger Group | 1 |
281-4202 Turbocharger Gp
| 23***51 | Bolt-Socket Head; (M8x1.25x65-mm) | 2 |
| 26***35 | Injector Group-Fuel | 1 |
| 28***02 | Turbocharger Group | 1 |
Basic Engine
253-0433 Belt Tensioner Gp
| 10***04 | Sleeve-Cylinder | 0 |
| 21***86 | Bearing-Sleeve; (Camshaft) | 1 |
| 25***33 | Belt Tensioner Group | 1 |
253-0437 Bracket Gp-Engine -Front
| 14***18 | Insert-Valve Seat; (Exhaust, Standard) | 6 |
| 18***82 | Insert-Valve Seat; (0.127-mm Os Od, Exhaust) | 0 |
| 18***83 | Insert-Valve Seat; (0.254-mm Os Od, Exhaust) | 0 |
212-4289 Camshaft Gp
| 13***83 | Retainer-Spring | 6 |
| 13***15 | Seat-Valve Spring | 6 |
| 13***18 | Spring-Valve; (Exhaust) | 6 |
212-4285 Camshaft Gp
| 21***85 | Camshaft Group | 1 |
| 22***00 | Sleeve-Injector | 6 |
| 23***85 | Insert-Valve Seat; (Standard)(Exhaust) | 6 |
4w-3462 Carrier Gp-Seal
| 1N***99 | Plug-O-Ring; (Straight Thread) | 2 |
| 21***46 | Cylinder Head Group | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
257-9145 Cover Gp-Cylinder Block
| 13***83 | Retainer-Spring | 6 |
| 13***15 | Seat-Valve Spring | 6 |
| 13***18 | Spring-Valve; (Exhaust) | 6 |
118-1727 Cover Gp-Front Housing -Accessory Drive
| 11***32 | Spacer-Special | 1 |
| 11***27 | Cover Group-Front Housing; -Accessory Drive | 1 |
| 16***21 | Damper Assem. | 1 |
172-8732 Cover Gp-Front Housing
| 11***32 | Spacer-Special | 1 |
| 15***36 | Pulley-Crankshaft; (8-Groove) | 1 |
| 16***21 | Damper Assem. | 1 |
211-9120 Cover Gp-Front Housing
| 10***17 | Gear; (50-Teeth) | 1 |
| 10***18 | Bearing | 1 |
| 10***22 | Adapter | 1 |
252-2328 Cover Gp-Valve Mechanism
| 18***54 | Bracket As | 1 |
| 25***28 | Cover Group-Valve Mechanism | 1 |
| 4W***03 | Cup-Roller Bearing | 2 |
210-5590 Crankshaft Gp
| 21***90 | Crankshaft Group | 1 |
| 22***44 | Clip | 3 |
| 24***00 | Spring | 11 |
305-8141 Cylinder Block Gp
| 30***41 | Cylinder Block Group | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 3 |
| 8T***36 | Capscrew; (Hex Hd) (M10 X 1.50 X 25l Gr 10.9) | 3 |
221-4482 Cylinder Block Gp
| 22***82 | Cylinder Block Group | 1 |
| 6V***17 | Bolt; (M8x1.25x30-mm)(Location Z) | 12 |
| 8T***00 | Bolt (M8x1.25x60mm); (M8x1.25x60-mm) | 2 |
263-3774 Cylinder Block Gp
| 26***74 | Cylinder Block Group | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 6 |
| 6V***36 | Bolt; (M12x1.75x70-mm) | 6 |
219-5844 Cylinder Head As
| 1W***64 | Gear-Flywheel Ring; (126-Teeth) | 1 |
| 20***82 | Flywheel As | 1 |
| 21***44 | Cylinder Head As | 1 |
314-4184 Cylinder Head As
| 11***69 | Plate-Thrust | 1 |
| 11***72 | Bearing | 1 |
| 11***19 | Plate-Retaining | 1 |
219-5847 Cylinder Head Gp
| 1U***46 | Sealant (For Locations A) | 0 |
| 21***47 | Cylinder Head Group | 1 |
| 24***59 | Housing-Front | 1 |
300-9550 Cylinder Head Gp
| 09***59 | Bolt; (M14x2x60-mm) | 6 |
| 09***88 | Bolt; (M14x2x30-mm) | 2 |
| 10***29 | Washer; (21.5x120x8-mm Thk) | 4 |
219-5849 Cylinder Head Gp
| 15***96 | Plate-Lifting; (Rear) | 1 |
| 21***49 | Cylinder Head Group | 1 |
| 22***66 | Plate-Lifting; (Front) | 1 |
219-5846 Cylinder Head Gp
| 21***46 | Cylinder Head Group | 1 |
| 2P***94 | Plug-Sealing | 1 |
| 6V***42 | Bolt (M10x1.50x40mm) | 2 |
263-1850 Damper & Pulley Gp
| 16***24 | Pin-Piston | 1 |
| 17***43 | Jet As-Piston Cooling | 1 |
| 19***21 | Bolt; (Connecting Rod) | 2 |
234-7969 Drive Gp-Accessory
| 19***21 | Bolt; (Connecting Rod) | 2 |
| 19***53 | Ring-Piston; (Intermediate) | 1 |
| 19***71 | Pin-Piston | 1 |
177-6973 Drive Gp-Fan
| 17***73 | Drive Group-Fan | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 2 |
| 6F***62 | Washer,Flat Transmission Oil Cooler | 1 |
210-8176 Drive Gp-Fan
| 14***95 | Plug As | 1 |
| 21***76 | Drive Group-Fan | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
258-8723 Fastener Gp-Cylinder Head -Valve Cover Base
| 25***23 | Fastener Group-Cylinder Head; -Valve Cover Base | 1 |
| 3J***90 | Plug Adapter Turbo Oil Supply; Plug-Adapter Turbo Oil Supply | 1 |
116-4556 Fastener Gp-Front Housing
| 11***56 | Fastener Group-Front Housing; (Housing) | 1 |
| 26***25 | Pulley-Fan | 1 |
| 26***30 | Belt-Serpentine | 1 |
252-9551 Fastener Gp-Front Cover
| 23***90 | Belt-Serpentine | 1 |
| 25***51 | Fastener Group-Front Housing | 1 |
| 29***78 | Pulley-Fan | 1 |
113-6170 Fastener Gp-Lifting
| 11***70 | Fastener Group-Lifting; -Engine, Rear | 1 |
| 23***90 | Belt-Serpentine | 1 |
| 29***78 | Pulley-Fan | 1 |
186-5892 Flywheel Gp
| 18***92 | Flywheel Group | 1 |
| 25***32 | Rocker Arm As; (Exhaust) | 1 |
| 26***24 | Screw-Valve Adjustment; (M10x1.5-Thd) | 1 |
205-1321 Gear Gp-Front
| 20***21 | Gear Group-Front, Name-Plate (Norwegian) | 1 |
| 25***35 | Rocker Arm As; (Inlet) | 1 |
| 26***24 | Screw-Valve Adjustment; (M10x1.5-Thd) | 1 |
7w-8813 Housing Gp-Flywheel
| 22***09 | Seal Group-Crankshaft; (Rear) | 1 |
| 24***39 | Seal-Crankshaft; (Front)(Front) | 1 |
| 4R***99 | Excluder-Crankshaft Seal | 1 |
245-3260 Housing Gp-Front
| 13***79 | Rod-Valve Push; (Valve Push) | 12 |
| 13***81 | Lifter Group-Valve; -Mechanism | 3 |
| 21***09 | Bridge-Valve | 6 |
139-4081 Lifter Gp-Valve -Mechanism
| 13***81 | Lifter Group-Valve; -Mechanism | 4 |
| 21***09 | Bridge-Valve | 6 |
| 23***54 | Clip | 1 |
142-8100 Lifting Gp-Engine
| 13***17 | Spring | 5 |
| 13***98 | Shaft Assem. | 1 |
| 13***02 | Stand; (End) | 1 |
233-1120 Mounting Gp-Engine
| 13***17 | Spring | 5 |
| 13***98 | Shaft Assem. | 1 |
| 13***02 | Stand; (End) | 1 |
176-9429 Pan Gp-Oil -Engine
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 17***29 | Pan Group-Oil; -Engine | 1 |
| 19***22 | Adapter | 1 |
210-5592 Piston & Rod Gp
| 14***54 | Bolt; (M8x1.25x105-mm) | 1 |
| 16***10 | Breather As; (Crankcase) | 1 |
| 21***92 | Piston & Rod Group | 1 |
212-3652 Piston & Rod Gp
| 12***07 | Base | 1 |
| 14***29 | Connector As | 1 |
| 1R***07 | Filter As-Engine Oil; (Advanced Efficiency) | 1 |
159-0303 Plug Gp-Cylinder Block
| 03***80 | Spacer; (9x16x36-mm) | 1 |
| 09***29 | Connector | 2 |
| 15***03 | Plug Group-Cylinder Block; (Cylinder Block) | 1 |
162-8068 Plug Gp-Engine
| 13***26 | Bracket | 1 |
| 16***68 | Plug Group-Engine; -Oil Gallery | 1 |
| 17***79 | Gauge As-Oil Level; (Engine) | 1 |
279-7819 Plug Gp-Engine -Muffler
| 27***19 | Plug Group-Engine; (Muffler) | 1 |
| 3P***56 | Seal-O-Ring; (21.82mm Id) | 2 |
| 4W***32 | Elbow-Outlet | 1 |
233-1125 Pulley Gp
| 09***88 | Clamp; (Hose) | 1 |
| 20***83 | Valve As; (Oil Drain) | 1 |
| 23***25 | Pulley Group | 1 |
263-1847 Pulley Gp
| 11***42 | Adapter | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
| 19***19 | Gasket; (Coated Metal) | 1 |
256-3831 Rocker Arm Gp -Exhaust
| 20***97 | Pump Group-Engine Oil | 1 |
| 25***31 | Rocker Arm Group; -Exhaust | 1 |
| 6V***15 | Bolt; (M10x1.5x75-mm) | 2 |
256-3834 Rocker Arm Gp -Inlet
| 18***77 | Pump Group-Engine Oil | 1 |
| 25***34 | Rocker Arm Group; -Inlet | 1 |
| 7W***37 | Shaft-Oil Pump | 1 |
115-4203 Seal Gp-Crankshaft
| 11***03 | Seal Group-Crankshaft | 1 |
| 23***55 | Gasket | 1 |
| 26***43 | Core As-Engine Oil Cooler | 1 |
256-3830 Valve Mechanism Gp
| 12***66 | Gasket | 1 |
| 12***69 | Regulator-Water Temperature; (94-Deg C) | 1 |
| 13***12 | Gasket-Water Regulator; (Temperature Regulator Housing) | 1 |
232-3717 Valve Mechanism Gp
| 21***76 | Drive Group-Fan | 1 |
| 23***87 | Radiator & Hydraulic Oil Cooler Group | 1 |
| 23***17 | Valve Mechanism Group | 1 |
235-5528 Valve Mechanism Gp
| 23***92 | Fan As; (11-Blades) | 1 |
| 23***01 | Spacer-Fan | 1 |
| 23***28 | Valve Mechanism Group | 1 |
Cooling System
117-3643 Cooler Gp-Engine Oil
| 09***32 | Valve As-Drain | 1 |
| 09***43 | Seal-O-Ring | 4 |
| 09***35 | Clamp | 2 |
229-1786 Cooling Ar-High Ambient Temp
| 12***08 | Air Cleaner Group | 1 |
| 22***86 | Cooling Ar-High Ambient Temp | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
229-1787 Cooling Ar-High Ambient Temp
| 13***26 | Film-Instruction; (Top, Air Cleaner Cover) | 1 |
| 13***28 | Cover As | 1 |
| 13***29 | Valve-Dust; (Air Cleaner) | 1 |
336-1156 Fan & Motor Gp
| 12***08 | Air Cleaner Group | 1 |
| 33***56 | Fan & Motor Group; -Condenser | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
230-2893 Fan Gp-Suction
| 23***93 | Fan Group-Suction | 1 |
| 31***68 | Air Cleaner Group | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
192-9972 Housing & Regulator Gp
| 13***26 | Film-Instruction; (Top, Air Cleaner Cover) | 1 |
| 13***28 | Cover As | 1 |
| 13***29 | Valve-Dust; (Air Cleaner) | 1 |
236-4413 Pump Gp-Water
| 1U***46 | Sealant (For Locations A) | 0 |
| 23***13 | Pump Group-Water; -Coolant | 1 |
| 29***75 | Cover Group-Air Inlet; -Starting Aid Heater | 1 |
177-9823 Pump Gp-Water
| 17***23 | Pump Group-Water; (Water) | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 28***73 | Cover Group-Air Inlet; -Starting Aid Heater | 1 |
265-3559 Radiator & Hyd Oil Cooler Gp
| 17***73 | Clip | 1 |
| 17***26 | Support As | 1 |
| 26***59 | Radiator & Hydraulic Oil Cooler Group | 1 |
230-2887 Radiator & Hyd Oil Cooler Gp
| 10***71 | Spacer | 1 |
| 11***63 | Elbow | 1 |
| 13***26 | Stud; (M8x1.25x110-mm, M8x1.25x17-mm) | 1 |
245-9295 Radiator & Hyd Oil Cooler Gp
| 14***67 | Clamp; (Hose) | 12 |
| 23***65 | Hose | 1 |
| 23***66 | Hose | 1 |
265-3688 Radiator & Hyd Oil Cooler Gp
| 18***92 | Support As | 1 |
| 1W***31 | Clamp-Band; -Turbo Exhaust-Exhaust | 1 |
| 23***54 | Muffler As | 1 |
265-3686 Radiator & Hyd Oil Cooler Gp
| 18***72 | Spacer; (11x16x35-mm Thk) | 12 |
| 19***10 | Bolt-Flange Head | 12 |
| 21***64 | Manifold-Exhaust; (End) | 2 |
326-3886 Radiator & Hyd Oil Cooler Gp
| 18***88 | Bracket As, Clamp | 1 |
| 18***92 | Support As | 1 |
| 18***94 | Pipe As-Exhaust | 1 |
326-3887 Radiator & Hyd Oil Cooler Gp
| 17***40 | Turbocharger Group | 1 |
| 32***87 | Radiator & Hydraulic Oil Cooler Group | 1 |
| 3E***17 | Locknut; (M10x1.5-Thd)(Spiralock) | 4 |
Electrical And Starting System
132-1829 Alarm Gp -Fault
| 13***29 | Alarm Group; -Overload Warning | 1 |
| 33***09 | Software Group-Communication; (Product Link 300) | 1 |
| 33***10 | Service Group-Product Link; (Product Link 300) | 1 |
231-1771 Alarm Gp-Travel -Backup
| 23***71 | Alarm Group-Travel; -Backup | 1 |
| 32***92 | Software Group-Machine | 1 |
| 32***93 | Service Group-Machine | 1 |
177-6972 Alternator Gp-Charging
| 17***72 | Alternator Group-Charging; (Charging) | 1 |
| 32***94 | Software Group-Machine | 1 |
| 32***95 | Service Group-Machine | 1 |
185-5294 Alternator Gp-Charging
| 18***94 | Alternator Group-Charging; -Waste Handling | 1 |
| 32***83 | Monitor Group-Operator | 1 |
| 32***86 | Software Group-Monitor | 1 |
251-0440 Battery & Wiring Gp -Cold Weather
| 11***18 | Clip | 1 |
| 25***40 | Battery & Wiring Group; -Cold Weather | 1 |
| 7X***21 | Bolt; (M10x1.5x12-mm) | 1 |
251-0429 Battery & Wiring Gp
| 11***18 | Clip | 1 |
| 25***29 | Battery & Wiring Group | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 1 |
9w-0742 Block Gp-Junction -Battery
| 11***18 | Clip | 1 |
| 7X***21 | Bolt; (M10x1.5x12-mm) | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
313-7833 Camera & Mounting Gp -Work Area Visual System, Rear
| 31***33 | Camera & Mounting Group; -Work Area Visual System, Rear | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
327-3329 Camera & Mounting Gp -Work Area Visual System, Rear
| 12***86 | Element As-Jacket Water Heater; (120-Volt, 1000-Watt) | 1 |
| 13***48 | Kit-Seal; (Jacket Water Heater) | 1 |
| 13***17 | Cap As-Dust | 1 |
329-6570 Camera & Wiring Gp
| 26***51 | Wiring Group-Communication; -Product Link 321sr | 1 |
| 30***89 | Antenna & Mounting Group; -Product Link | 1 |
| 30***42 | Control & Mtg Group-Communication; -Product Link 321sr | 1 |
336-6684 Camera Gp -Work Area Visual System, Rear
| 17***93 | Cover | 1 |
| 17***17 | Lens As; (Floodlight) | 1 |
| 17***18 | Band | 1 |
309-5842 Control & Mtg Gp-Communication -Product Link 321sr
| 17***93 | Cover | 1 |
| 17***17 | Lens As; (Floodlight) | 1 |
| 17***18 | Band | 1 |
309-5885 Control & Mtg Gp-Communication -Product Link 121sr
| 15***23 | Lamp Group-Flood; -Horizontal Rh | 1 |
| 30***85 | Control & Mtg Group-Communication; -Product Link 121sr | 1 |
241-7602 Control & Mtg Gp-Engine Elek
| 16***41 | Lamp Group-Flood; -Cab Guard-Cab | 2 |
| 24***02 | Control & Mtg Group-Engine Elek | 1 |
| 25***74 | Bracket As; (Rh) | 1 |
221-8872 Control & Mtg Gp-Machine
| 11***36 | Clip | 8 |
| 11***37 | Clip | 1 |
| 11***18 | Clip | 1 |
262-1421 Electronics Gp-Communication -Product Link 300
| 11***36 | Clip | 9 |
| 11***37 | Clip | 1 |
| 11***18 | Clip | 1 |
221-8875 Electronics Gp-Machine
| 09***42 | Screw; (Machine) (M6x1.0x16mm) | 6 |
| 12***37 | Washer; (17.5x40x4-mm Thk) | 2 |
| 12***38 | Washer-Rubber; (14.5x40x2-mm Thk) | 2 |
260-2050 Electronics Gp-Machine -High Power
| 14***45 | Bolt; (M16x2x20-mm) | 2 |
| 16***41 | Lamp Group-Flood; -Cab Guard-Cab | 2 |
| 19***59 | Support | 2 |
221-8861 Electronics Gp-Monitor
| 22***61 | Electronics Group-Monitor | 1 |
| 23***56 | Panel Group-Circuit Breaker | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
259-5295 Fastener Gp-Wiring Harness -Joystick
| 10***04 | Tee | 1 |
| 16***61 | Plug As | 1 |
| 17***18 | Tee As | 1 |
251-0526 Fastener Gp-Wiring Harness -Straight Travel
| 12***23 | Block; (Terminal) | 1 |
| 12***02 | Switch Group-Magnetic; -Starting Motor, Start Relay | 1 |
| 17***10 | Circuit Breaker As; (80-Ampere) | 2 |
259-5294 Fastener Gp-Wiring Harness -Foot Switch
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 24***53 | Plug As | 1 |
| 25***94 | Fastener Group-Wiring Harness; -Foot Switch | 1 |
259-5237 Fastener Gp-Wiring Harness -Heavy Lift
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***07 | Switch Group-Rotary; -Autodig Material Select-Throttle Position | 1 |
259-5293 Fastener Gp-Wiring Harness -Pedal Control
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 4 |
9y-5316 Heater Gp-Jacket Water
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***34 | Probe As-Liquid Level; (Water Separator) | 1 |
314-3529 Installation Ar-Communication -Product Link 321sr
| 09***61 | Strap; (Cable) | 2 |
| 17***45 | Sensor Group-Liquid Level; -Water Separator-Water In Fuel | 1 |
| 31***29 | Installation Ar-Communication; -Product Link 321sr | 1 |
153-2523 Lamp Gp-Flood
| 15***23 | Lamp Group-Flood; -Horizontal Rh | 1 |
| 16***03 | Sensor Group-Pressure; (Turbocharger Inlet, Rh) | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 1 |
153-2521 Lamp Gp-Flood
| 15***21 | Lamp Group-Flood; -Chassis, Boom-Boom, Rear | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
167-3441 Lamp Gp-Flood
| 16***05 | Sensor As-Pressure; (Unfiltered Engine Oil) | 1 |
| 16***41 | Lamp Group-Flood; -Cab Guard-Cab | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
4i-5409 Lighting Gp-Chassis -Front, Rh
| 16***04 | Sensor Group-Pressure; (Turbocharger Outlet) | 1 |
| 4I***09 | Lighting Group-Chassis; -Front, Rh | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
252-1241 Lighting Gp-Flood -Cab
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 2 |
| 17***49 | Strap; (Marker) | 1 |
238-2300 Lighting Gp-Flood -Boom
| 21***67 | Seal-O-Ring | 1 |
| 22***36 | Sensor Group-Pressure; -Injection Actuation | 1 |
| 23***00 | Lighting Group-Flood; -Boom | 1 |
163-6772 Lighting Gp-Flood -Cab
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***76 | Wedge-Plug Lock; (3-Pin) | 1 |
| 16***72 | Lighting Group-Flood; -Cab | 1 |
252-1242 Lighting Gp-Flood -Cab Guard
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 2 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
238-2301 Lighting Gp-Flood -Boom
| 19***25 | Sensor Group-Pressure; -Engine Oil | 1 |
| 23***01 | Lighting Group-Flood; -Mass Boom | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
238-1432 Panel & Mtg Gp-Circuit Breaker
| 23***32 | Panel & Mtg Group-Circuit Breaker | 1 |
| 24***30 | Sensor Group-Speed; -Engine Timing | 1 |
| 3P***47 | Seal-O-Ring (Id=13.94mm); (13.949mm Id) | 2 |
231-1756 Panel Gp-Circuit Breaker
| 13***11 | Sensor Group-Temperature; (Transmission Lubrication Oil) | 1 |
| 13***45 | Pad; (Connector) | 1 |
| 23***56 | Panel Group-Circuit Breaker | 1 |
251-0542 Panel Gp-Switch -Engine Speed, Start
| 13***45 | Pad; (Connector) | 0 |
| 25***42 | Panel Group-Switch; -Engine Speed, Start | 1 |
| 26***97 | Sensor Group-Temperature; (Air Inlet Manifold) | 1 |
235-8200 Plug Gp-Connector -Engine Harness, Protective Cover
| 23***00 | Plug Group-Connector; -Engine Harness, Protective Cover | 1 |
| 26***97 | Sensor Group-Temperature; (Air Inlet Manifold) | 1 |
| 6V***09 | Seal-O-Ring (Id=16.36mm); (16.36-mm Id) | 1 |
257-2186 Sensor Gp-Engine
| 03***12 | Terminal-Ring; (2-Ga, 1/4-In Screw)(Circuit Breaker) | 1 |
| 13***43 | Boot; (Red)(Red) | 1 |
| 20***77 | Bolt-Flange Head; (M8x1x25-mm) | 2 |
330-6040 Sensor Gp-Engine
| 23***45 | Nut-Sleeve; (5/16-24-Thd) | 1 |
| 23***34 | Valve Group-Ether Starting | 1 |
| 24***94 | Fitting As; (Control) | 1 |
233-1124 Sensor Gp-Liquid Level -Water In Fuel
| 23***24 | Sensor Group-Liquid Level; -Water In Fuel | 1 |
| 23***76 | Starting Aid Group-Ether | 1 |
| 25***40 | Battery & Wiring Group; -Cold Weather | 1 |
178-2345 Sensor Gp-Liquid Level
| 12***26 | Starting Motor Group-Electric; -Cold Weather | 1 |
| 17***45 | Sensor Group-Liquid Level; -Water Separator-Water In Fuel | 1 |
| 23***76 | Starting Aid Group-Ether | 1 |
224-4536 Sensor Gp-Pressure
| 22***36 | Sensor Group-Pressure; -Injection Actuation | 1 |
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
236-6220 Sensor Gp-Pressure
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
303-3357 Sensor Gp-Pressure
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 1S***12 | Screw-Tapping | 2 |
| 23***11 | Plug As-Connector; (2-Pin) | 1 |
197-8394 Sensor Gp-Pressure
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***63 | Terminal As-Starter | 1 |
| 10***49 | Housing As-Starter | 1 |
267-1402 Sensor Gp-Pressure
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 26***02 | Sensor Group-Pressure; -Injection Actuation | 1 |
266-8650 Sensor Gp-Pressure
| 08***83 | Washer; (0.8mm Thk) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***99 | Switch As; (Hydraulic Lockout, Neutral Start) | 1 |
197-8393 Sensor Gp-Pressure
| 11***73 | Bolt-12 Point Head; (M10x1.5x35-mm) | 3 |
| 19***93 | Sensor Group-Pressure; -Atmospheric | 1 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 1 |
210-1747 Sensor Gp-Pressure
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***02 | Housing As | 1 |
| 21***47 | Sensor Group-Pressure; -Air Inlet Manifold | 1 |
239-2396 Sensor Gp-Pressure
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 23***96 | Sensor Group-Pressure; -Engine Oil, Fuel | 1 |
194-6725 Sensor Gp-Pressure
| 11***73 | Bolt-12 Point Head; (M10x1.5x35-mm) | 3 |
| 19***25 | Sensor Group-Pressure; -Engine Oil | 1 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 1 |
276-9067 Sensor Gp-Pressure
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 1S***12 | Screw-Tapping | 2 |
265-2103 Sensor Gp-Speed
| 26***03 | Sensor Group-Speed | 1 |
| 5P***00 | Key Total 2 Pieces Per Unit; (Literature Compartment) | 1 |
| 6V***62 | Screw-Machine; (8-32x0.31-In) | 4 |
190-6186 Sensor Gp-Speed -Engine Timing
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***10 | Seal | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 5 |
236-6221 Sensor Gp-Speed -Engine Timing
| 10***10 | Seal | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 5 |
| 23***21 | Sensor Group-Speed; -Engine Timing | 1 |
189-5746 Sensor Gp-Speed
| 18***46 | Sensor Group-Speed; -Low Output-Engine Timing-Transmission | 1 |
| 2S***78 | Seal-O-Ring (Id=37.47mm) | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
197-8391 Sensor Gp-Temperature
| 12***66 | Switch As-Roller | 1 |
| 19***91 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
| 24***56 | Bracket | 1 |
234-5012 Sensor Gp-Temperature
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 23***12 | Sensor Group-Temperature; -Coolant, Water | 1 |
274-7396 Sensor Gp-Temperature
| 11***36 | Clip | 2 |
| 11***18 | Clip | 2 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
234-5013 Sensor Gp-Temperature
| 1M***19 | Bolt; (5/16-18x1.375-In)(5/16-18x1.375 In) | 1 |
| 1M***20 | Nut-Battery Terminal (5/16-18 Thd); (5/16-18-Thd)(5/16-18x1.375 In) | 1 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 2 |
274-7395 Sensor Gp-Temperature
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 8 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***36 | Clip | 1 |
249-9223 Starting Aid Gp -Wiring
| 09***42 | Screw; (Machine) (M6x1.0x16mm) | 2 |
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 3 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 3 |
239-6676 Starting Aid Gp-Ether
| 09***42 | Screw; (Machine) (M6x1.0x16mm) | 2 |
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 3 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 3 |
314-3586 Starting Ar-Cold Weather
| 14***50 | Relay; (24-Volt)(Hydraulic Lock, Quick Cplr, Supply) | 1 |
| 14***51 | Connector-Receptacle | 1 |
| 14***69 | Terminal-Blade; (14-Ga To 20-Ga) | 2 |
275-3747 Starting Ar-Cold Weather
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 4 |
| 12***68 | Socket-Connector; (14-Ga) | 3 |
207-1517 Starting Motor Gp-Electric
| 11***36 | Clip | 1 |
| 20***17 | Starting Motor Group-Electric | 1 |
| 26***43 | Cable As | 1 |
111-4275 Starting Motor Gp-Electric
| 11***75 | Starting Motor Group-Electric; (Cold Weather) | 1 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 30***90 | Harness As-Wiring; (Work Area Visual System, Rear) | 1 |
128-5626 Starting Motor Gp-Electric
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 4 |
| 12***68 | Socket-Connector; (14-Ga) | 3 |
207-1551 Starting Motor Gp-Electric
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***18 | Sensor Group-Temperature; (Intake Manifold Air) | 1 |
| 11***50 | Sleeve (31cm); (31-cm) | 0 |
5c-6108 Switch Gp-Refueling -Fuel Tank Shutoff
7n-0719 Switch Gp-Disconnect -Battery
| 11***37 | Clip | 1 |
| 11***18 | Clip | 3 |
| 13***89 | Clip; (Ladder) | 1 |
125-1302 Switch Gp-Magnetic -Start Relay
| 11***18 | Clip | 3 |
| 12***02 | Switch Group-Magnetic; -Starting Motor, Start Relay | 1 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
209-5582 Switch Gp-Magnetic -Air Inlet Heater Relay
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
| 12***68 | Socket-Connector; (14-Ga) | 11 |
234-6613 Switch Gp-Position -Hydraulic Lockout
| 23***36 | Wiring Group-Console; -Lh | 1 |
| 23***13 | Switch Group-Position; -Hydraulic Lockout | 1 |
| 25***35 | Wiring Group-Console; -Rh | 1 |
258-0883 Switch Gp-Pressure -Fuel
| 10***64 | Connector-Plug | 1 |
| 10***65 | Terminal; (Female) | 14 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
238-1594 Switch Gp-Push Button -Refueling Pump, Start
| 12***87 | Socket-Auxiliary Power; (12-Volt, 7-Ampere) | 1 |
| 23***94 | Switch Group-Push Button; -Refueling Pump, Start | 1 |
| 24***09 | Converter-Power; (24-Volt To 12-Volt) | 1 |
238-1596 Switch Gp-Push Button -Refueling Pump, Stop
| 12***87 | Socket-Auxiliary Power; (12-Volt, 7-Ampere) | 2 |
| 23***96 | Switch Group-Push Button; -Refueling Pump, Stop | 1 |
| 24***09 | Converter-Power; (24-Volt To 12-Volt) | 2 |
319-4420 Switch Gp-Rotary -Throttle Position
| 11***18 | Clip | 1 |
| 27***11 | Harness As-Control; (Fan) | 1 |
| 31***20 | Switch Group-Rotary; -Throttle Position | 1 |
106-0107 Switch Gp-Rotary -Engine Speed
| 10***07 | Switch Group-Rotary; -Autodig Material Select-Throttle Position | 1 |
| 29***59 | Wiring Group-Chassis; -Fan Clutch | 1 |
| 29***60 | Wiring Group-Fan; -Fan Clutch | 1 |
9g-7641 Switch Gp-Start -Engine, Key
| 10***29 | Hose; (60-cm) | 0 |
| 11***36 | Clip | 6 |
| 11***37 | Clip | 2 |
165-5970 Switch Gp-Toggle -Fuel Priming Pump
| 13***06 | Film-Identification; (Fuel) | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
252-1225 Switch Gp-Wiper
| 10***86 | Sleeve | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 13***89 | Clip; (Ladder) | 1 |
239-1134 Valve Gp-Ether Starting
| 09***28 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 10***64 | Connector-Plug | 1 |
251-0441 Wiring Gp-Aux Start Receptacle -Jump Start
| 09***91 | Screw-Machine; (M5x0.8x35-mm) | 2 |
| 11***26 | Housing-Plug | 1 |
| 11***28 | Seal | 2 |
251-0437 Wiring Gp-Auxiliary Control -System 17, Combined Fn, Med Pr
| 09***91 | Screw-Machine; (M5x0.8x35-mm) | 2 |
| 11***26 | Housing-Plug | 1 |
| 11***28 | Seal | 2 |
251-0439 Wiring Gp-Boom Float
| 14***77 | Drive Group-Final; (Without Motor), Seal, Seal; Rot.Shaft Lip Seal | 1 |
| 15***21 | Motor Group-Travel | 1 |
| 25***39 | Wiring Group-Boom Float; -Boom Float | 1 |
328-0093 Wiring Gp-Cab -Boom Float
| 20***74 | Motor & Mtg Group-Travel | 1 |
| 26***96 | Drive Group-Final; -Without Motor | 1 |
| 32***93 | Wiring Group-Cab; -Boom Float | 1 |
251-0432 Wiring Gp-Cab
| 25***32 | Wiring Group-Cab | 1 |
| 32***16 | Kit-Seal; (Final Drive) | 1 |
| 32***18 | Kit-Disc; (Final Drive) | 1 |
328-0048 Wiring Gp-Cab -Rear View Display
| 09***31 | Ring - Retaining | 2 |
| 09***78 | Plate (8.0 mm Thick) | 1 |
| 09***79 | Plate (9.0 mm Thick) | 1 |
259-5118 Wiring Gp-Cab -Priming Pump
| 09***31 | Ring - Retaining | 2 |
| 09***78 | Plate (8.0 mm Thick) | 1 |
| 09***79 | Plate (9.0 mm Thick) | 1 |
251-0613 Wiring Gp-Cab -Boom Float
| 20***74 | Motor & Mtg Group-Travel | 1 |
| 22***16 | Drive Group-Final; -Without Motor | 1 |
| 25***13 | Wiring Group-Cab; -Boom Float | 1 |
306-8720 Wiring Gp-Camera -Rear Vision Camera
| 30***20 | Wiring Group-Camera; -Rear Vision Camera | 1 |
| 8T***23 | Washer-Plated; (22x35x3.5-mm Thk) | 40 |
| 8T***41 | Bolt-Plt; (M20 X 2.5 X 70) | 40 |
291-7459 Wiring Gp-Chassis -Fan Clutch
| 17***12 | Fastener Group-Swing & Final Dr | 1 |
| 17***94 | Sprocket Group | 2 |
| 19***87 | Drive Group-Swing; -With Motor | 1 |
267-7751 Wiring Gp-Communication -Product Link 321sr
| 26***51 | Wiring Group-Communication; -Product Link 321sr | 1 |
| 6Y***98 | Sprocket - Track (21 Teeth) | 1 |
| 8T***30 | Capscrew; (Use 12-16) (Hex Hd) (M20x2.5x50) (Gd 10.9 Z) | 18 |
283-2761 Wiring Gp-Communication
| 13***77 | Bolt As; (M12x1.75x35-mm) | 4 |
| 22***41 | Box Group-Storage | 1 |
| 28***61 | Wiring Group-Communication | 1 |
231-1836 Wiring Gp-Console -Lh
| 09***43 | Pin-Cotter | 1 |
| 09***80 | Pin; (Clevis) | 1 |
| 10***87 | Bolt; (Hex Socket) (M6x1.0x20.0mm) | 4 |
251-0433 Wiring Gp-Console
| 24***37 | Spacer; (39x75x20-mm Thk) | 4 |
| 25***33 | Wiring Group-Console | 1 |
| 26***08 | Counterweight Group | 1 |
251-0435 Wiring Gp-Console -Rh
| 24***37 | Spacer; (39x75x20-mm Thk) | 4 |
| 25***35 | Wiring Group-Console; -Rh | 1 |
| 33***81 | Counterweight Group | 1 |
251-0482 Wiring Gp-Converter
| 08***44 | Spacer; (13.3x21.3x25-mm Thk) | 9 |
| 12***71 | Liner | 1 |
| 18***22 | Liner | 1 |
251-0485 Wiring Gp-Converter
| 24***37 | Spacer; (39x75x20-mm Thk) | 4 |
| 25***85 | Wiring Group-Converter; -12-Volt, 7-Ampere | 1 |
| 27***09 | Counterweight Group | 1 |
198-2714 Wiring Gp-Engine
| 19***14 | Wiring Group-Engine | 1 |
| 24***37 | Spacer; (39x75x20-mm Thk) | 4 |
| 33***55 | Counterweight Group | 1 |
330-6022 Wiring Gp-Engine
| 08***44 | Spacer; (13.3x21.3x25-mm Thk) | 9 |
| 12***71 | Liner | 1 |
| 18***22 | Liner | 1 |
291-7460 Wiring Gp-Fan -Clutch
| 08***44 | Spacer; (13.3x21.3x25-mm Thk) | 9 |
| 12***71 | Liner | 1 |
| 18***22 | Liner | 1 |
251-0448 Wiring Gp-Fan -Clutch
| 24***37 | Spacer; (39x75x20-mm Thk) | 4 |
| 25***48 | Wiring Group-Fan; -Fan Clutch | 1 |
| 28***90 | Counterweight Group | 1 |
259-4965 Wiring Gp-Fine Swing
| 08***44 | Spacer; (13.3x21.3x25-mm Thk) | 9 |
| 12***71 | Liner | 1 |
| 18***22 | Liner | 1 |
259-5053 Wiring Gp-Fuel System -Priming Pump
| 08***44 | Spacer; (13.3x21.3x25-mm Thk) | 9 |
| 12***71 | Liner | 1 |
| 18***22 | Liner | 1 |
259-4949 Wiring Gp-Medium Pressure
| 17***15 | Bumper | 1 |
| 17***39 | Liner | 1 |
| 20***27 | Liner | 1 |
251-0430 Wiring Gp-Platform
| 25***30 | Wiring Group-Platform | 1 |
| 25***78 | Insulation | 1 |
| 25***79 | Insulation | 2 |
238-1570 Wiring Gp-Refueling Pump
| 23***70 | Wiring Group-Refueling Pump; -Refueling | 1 |
| 25***78 | Insulation | 1 |
| 25***79 | Insulation | 2 |
Engine Arrangement
324-4142 Engine Ar
| 11***18 | Bolt As; (M8x1.25x16-mm) | 3 |
| 17***67 | Spacer; (8.8x16x10-mm Thk)(Marked X) | 8 |
| 1U***46 | Sealant (For Locations A) | 0 |
276-7220 Engine Ar
| 23***83 | Gasket | 1 |
| 24***76 | Seal | 1 |
| 27***20 | Engine Ar | 1 |
239-6634 Engine Ar
| 10***94 | Plate-Thrust | 1 |
| 1B***05 | Key; (Woodruff) | 1 |
| 21***84 | Camshaft As | 1 |
277-8262 Engine Ar
| 11***18 | Bolt As; (M8x1.25x16-mm) | 3 |
| 17***67 | Spacer; (8.8x16x10-mm Thk)(Marked X) | 8 |
| 1U***46 | Sealant (For Locations A) | 0 |
264-8492 Engine Ar -High Power
| 10***94 | Plate-Thrust | 1 |
| 1B***05 | Key; (Woodruff) | 1 |
| 21***88 | Camshaft As | 1 |
263-2004 Engine Ar-Complete
| 13***19 | Seal-Integral; (Integral) | 1 |
| 26***04 | Engine Ar-Complete | 1 |
| 4W***26 | Cover | 1 |
264-9647 Engine Ar-Complete
| 06***55 | Seal-O-Ring (Id=47.22mm) | 1 |
| 26***47 | Engine Ar-Complete | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 2 |
253-5325 Engine Ar-Complete
| 11***18 | Bolt As; (M8x1.25x16-mm) | 3 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 21***21 | Stud; (M8x1.25-Thd) | 3 |
236-4284 Engine Ar-Core
| 09***49 | Bolt; (M8x1.25x40-mm) | 13 |
| 12***06 | Seal; (Engine Oil Fill Cap) | 1 |
| 16***26 | Seal-O-Ring | 1 |
253-5324 Engine Ar-Core
| 09***49 | Bolt; (M8x1.25x40-mm) | 13 |
| 12***06 | Seal; (Engine Oil Fill Cap) | 1 |
| 16***26 | Seal-O-Ring | 1 |
227-5946 Engine Ar-Core
| 12***57 | Washer; (10.85x19.3x1.27-mm Thk) | 2 |
| 13***22 | Stud | 2 |
| 16***76 | Cover As-Front | 1 |
279-7824 Installation Ar-Engine
| 1W***07 | Sleeve | 2 |
| 27***24 | Installation Ar-Engine | 1 |
| 30***41 | Cylinder Block Group | 1 |
287-2559 Installation Ar-Engine
| 28***59 | Installation Ar-Engine | 1 |
| 5P***47 | Washer (Bracket To Valve Support) | 14 |
| 7E***68 | Cap-Crankshaft Bearing | 7 |
222-8379 Installation Ar-Engine
| 10***08 | Bearing-Main; (Standard) | 6 |
| 14***62 | Bearing; (0.25mm Undersize) | 0 |
| 14***64 | Bearing; (0.5mm Undersize) | 0 |
Frame And Body
223-3040 Box & Mtg Gp-Storage
| 16***76 | Hinge | 2 |
| 20***89 | Cushion | 1 |
| 22***40 | Box & Mtg Group-Storage | 1 |
223-3041 Box Gp-Storage
| 13***73 | Bolt As; (M12x1.75x25-mm) | 2 |
| 22***41 | Box Group-Storage | 1 |
| 23***02 | Spacer; (15x35x11-mm Thk) | 2 |
266-8907 Counterweight & Mounting Gp
| 09***90 | Shim (1.0 mm Thick) | 4 |
| 09***64 | Spacer; (103x140x12-mm Thk) | 2 |
| 09***67 | Washer; (22x60x8-mm Thk) | 2 |
333-2481 Counterweight Gp
| 13***76 | Bolt As-Locking; (M12x1.75x30-mm) | 38 |
| 18***84 | Sheet | 1 |
| 22***98 | Sheet | 1 |
300-9918 Counterweight Gp
| 09***02 | Pin, Dowel | 1 |
| 11***28 | Bolt; (M24x3x130-mm) | 35 |
| 11***29 | Bolt; (M24x3x100-mm) | 42 |
278-3609 Counterweight Gp
| 11***83 | Seal (1100 cm) (Order By The Centimeter) | 0 |
| 27***09 | Counterweight Group | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
323-9301 Counterweight Gp
| 13***76 | Bolt As-Locking; (M12x1.75x30-mm) | 38 |
| 18***84 | Sheet | 1 |
| 22***98 | Sheet | 1 |
278-3608 Counterweight Gp
| 09***90 | Shim (1.0 mm Thick) | 4 |
| 09***64 | Spacer; (103x140x12-mm Thk) | 2 |
| 09***67 | Washer; (22x60x8-mm Thk) | 2 |
284-8689 Counterweight Gp
| 19***78 | Gear & Bearing Group-Swing | 1 |
| 22***88 | Gear & Bearing Group-Swing | 1 |
| 28***89 | Counterweight Group | 1 |
330-1255 Counterweight Gp
| 09***57 | Hinge As | 1 |
| 13***76 | Bolt As-Locking; (M12x1.75x30-mm) | 4 |
| 18***95 | Plate As | 1 |
300-9920 Counterweight Gp
| 09***20 | Spacer; (25x44x6-mm Thk) | 38 |
| 09***02 | Pin, Dowel | 1 |
| 14***03 | Cover | 1 |
300-9919 Counterweight Gp
| 09***02 | Pin, Dowel | 1 |
| 11***28 | Bolt; (M24x3x130-mm) | 24 |
| 11***29 | Bolt; (M24x3x100-mm) | 42 |
284-8690 Counterweight Gp
| 14***85 | Seal (1100 cm) (Order By The Centimeter) | 0 |
| 22***73 | Seal-Dust | 2 |
| 28***90 | Counterweight Group | 1 |
266-8908 Counterweight Gp
| 16***29 | Plate As | 1 |
| 18***21 | Bumper As | 1 |
| 18***25 | Bumper As | 2 |
298-2972 Cover As-Sound Suppression -Fuel Tank
| 16***98 | Handle | 1 |
| 22***62 | Seal | 4 |
| 29***72 | Cover As-Sound Suppression; -Fuel Tank | 1 |
278-3785 Cover As-Sound Suppression -Air Cleaner, Battery
| 13***84 | Plate As | 1 |
| 13***86 | Plate As | 1 |
| 27***85 | Cover As-Sound Suppression; -Air Cleaner, Battery | 1 |
256-1677 Cover As-Sound Suppression -Air Cleaner
| 09***57 | Hinge As | 1 |
| 13***76 | Bolt As-Locking; (M12x1.75x30-mm) | 8 |
| 25***77 | Cover As-Sound Suppression; -Air Cleaner | 1 |
236-3382 Cover As-Sound Suppression -Fuel Tank
| 13***76 | Bolt As-Locking; (M12x1.75x30-mm) | 4 |
| 13***71 | Insulation | 1 |
| 18***95 | Plate As | 1 |
330-1430 Cover As-Sound Suppression -Fuel, Hydraulic Tanks
| 22***62 | Seal | 4 |
| 33***30 | Cover As-Sound Suppression; -Fuel, Hydraulic Tanks | 1 |
| 33***63 | Handrail As | 1 |
262-2450 Door Gp-Access -Air Cleaner, Battery
| 08***08 | Shim (1.0mm Thick) | 2 |
| 08***09 | Shim (2.0mm Thick) | 2 |
| 10***87 | Bolt; (Hex Socket) (M6x1.0x20.0mm) | 6 |
289-6902 Door Gp-Access -Radiator
| 26***64 | Hood Group-Engine; -High Ambient | 1 |
| 28***02 | Door Group-Access; -Radiator | 2 |
289-6905 Door Gp-Access -Hydraulic Pump
| 26***64 | Hood Group-Engine; -High Ambient | 1 |
| 28***05 | Door Group-Access; -Hydraulic Pump | 1 |
298-2970 Door Gp-Access -Air Cleaner, Battery
| 09***29 | Cushion | 2 |
| 10***48 | Seal; (0.5-M Each) | 0 |
| 11***89 | Hinge | 2 |
236-3397 Door Gp-Access -Pump Compartment
| 13***73 | Bolt As; (M12x1.75x25-mm) | 2 |
| 13***78 | Bolt As; (M12x1.75x40-mm) | 3 |
| 17***79 | Clamp | 2 |
289-6900 Door Gp-Access -Fuel Priming Pump, Radiator
| 08***08 | Shim (1.0mm Thick) | 2 |
| 08***09 | Shim (2.0mm Thick) | 2 |
| 10***87 | Bolt; (Hex Socket) (M6x1.0x20.0mm) | 6 |
262-2452 Door Gp-Access -Fuel Priming Pump, Radiator
| 08***08 | Shim (1.0mm Thick) | 2 |
| 08***09 | Shim (2.0mm Thick) | 2 |
| 10***87 | Bolt; (Hex Socket) (M6x1.0x20.0mm) | 6 |
236-3751 Door Gp-Access -Radiator, Lh
| 08***08 | Shim (1.0mm Thick) | 2 |
| 08***09 | Shim (2.0mm Thick) | 2 |
| 10***87 | Bolt; (Hex Socket) (M6x1.0x20.0mm) | 6 |
262-2455 Door Gp-Access -Hydraulic Pump
| 08***08 | Shim (1.0mm Thick) | 2 |
| 08***09 | Shim (2.0mm Thick) | 2 |
| 10***87 | Bolt; (Hex Socket) (M6x1.0x20.0mm) | 6 |
262-2400 Door Gp-Access -Air Cleaner
| 08***08 | Shim (1.0mm Thick) | 2 |
| 08***09 | Shim (2.0mm Thick) | 2 |
| 10***87 | Bolt; (Hex Socket) (M6x1.0x20.0mm) | 6 |
223-3042 Fender & Cover Gp -With Step
| 09***29 | Cushion | 2 |
| 10***48 | Seal; (0.5-M Each) | 0 |
| 11***89 | Hinge | 2 |
330-1166 Fender & Cover Gp
| 09***29 | Cushion | 2 |
| 10***48 | Seal; (0.5-M Each) | 0 |
| 11***89 | Hinge | 2 |
235-7613 Frame Gp-Upper -With Side Bumper
| 23***13 | Frame Group-Upper; -With Side Bumper | 1 |
| 24***13 | Sheet As | 1 |
| 24***15 | Insulation | 1 |
277-8252 Frame Gp-Upper
| 23***99 | Insulation | 1 |
| 24***21 | Liner | 1 |
| 25***86 | Insulation | 1 |
228-5504 Frame Gp-Upper
| 22***04 | Frame Group-Upper | 1 |
| 23***88 | Insulation | 1 |
| 25***08 | Insulation | 1 |
294-5672 Frame Gp-Upper
| 18***80 | Seal; (8.8-cm) | 0 |
| 23***75 | Insulation | 1 |
| 24***16 | Insulation | 1 |
227-6087 Gear & Bearing Gp-Swing
| 22***87 | Gear & Bearing Group-Swing | 1 |
| 26***98 | Liner | 1 |
| 26***99 | Liner | 1 |
294-5675 Gear & Bearing Gp-Swing
| 23***88 | Insulation | 1 |
| 25***08 | Insulation | 1 |
| 25***09 | Insulation | 1 |
227-6088 Gear & Bearing Gp-Swing
| 22***88 | Gear & Bearing Group-Swing | 1 |
| 27***03 | Liner | 1 |
| 27***04 | Liner | 1 |
267-6755 Gear & Bearing Gp-Swing
| 26***55 | Gear & Bearing Group-Swing | 1 |
| 27***81 | Insulation | 1 |
| 27***51 | Insulation | 1 |
344-0358 Gear & Bearing Gp-Swing
| 25***82 | Insulation | 1 |
| 27***58 | Insulation | 1 |
| 27***01 | Insulation | 1 |
199-4478 Gear & Bearing Gp-Swing
| 19***78 | Gear & Bearing Group-Swing | 1 |
| 25***02 | Liner | 1 |
| 25***03 | Liner | 1 |
227-6107 Gear & Bearing Gp-Swing
| 22***07 | Gear & Bearing Group-Swing | 1 |
| 27***46 | Insulation | 1 |
| 27***47 | Insulation | 1 |
223-3049 Guard Gp-Bottom -Heavy-Duty
| 22***49 | Guard Group-Bottom; -Heavy-Duty | 1 |
| 23***65 | Step | 2 |
| 8T***38 | Bolt-Pipe As To Main Pump Suction Port | 4 |
262-2409 Guard Gp-Bottom
| 13***73 | Bolt As; (M12x1.75x25-mm) | 4 |
| 17***15 | Bumper | 3 |
| 23***56 | Sheet As | 1 |
262-2486 Guard Gp-Bottom
| 25***71 | Insulation | 1 |
| 25***72 | Insulation | 1 |
| 26***86 | Guard Group-Bottom | 1 |
223-3047 Guard Gp-Bottom
| 22***47 | Guard Group-Bottom | 1 |
| 23***70 | Sheet As | 1 |
| 27***83 | Insulation | 2 |
262-2410 Guard Gp-Bottom -Heavy-Duty
| 10***48 | Seal; (0.5-M Each) | 0 |
| 23***30 | Insulation | 1 |
| 25***01 | Insulation | 1 |
134-8883 Guard Gp-Swivel
| 13***83 | Guard Group-Swivel | 1 |
| 23***04 | Support As | 1 |
| 26***62 | Insulation | 1 |
249-7108 Handrail Gp -Cab
| 09***14 | Ring, Back-Up | 2 |
| 09***27 | Valve-Fill; (Track Tension Cylinder) | 1 |
| 09***21 | Seal-Lip Type | 1 |
256-1644 Handrail Gp -Front, Rh
| 18***90 | Guard Group-Travel Motor | 1 |
| 19***40 | Idler Group-Front | 1 |
| 19***50 | Roller Ar-Track & Carrier | 1 |
223-3050 Hood & Guard Gp
| 13***83 | Guard Group-Swivel | 1 |
| 17***94 | Sprocket Group | 2 |
| 18***13 | Guard Group-Travel Motor; -Heavy-Duty | 1 |
223-3043 Hood & Guard Gp
| 22***43 | Hood & Guard Group | 1 |
| 23***03 | Lines Group-Travel Motor | 1 |
| 23***07 | Frame Group-Undercarriage | 1 |
236-3395 Hood Ar -Perforated
| 11***17 | Bracket | 4 |
| 22***24 | Frame As-Track Roller; (Rh) | 1 |
| 22***25 | Frame As-Track Roller; (Lh) | 1 |
262-2464 Hood Gp-Engine
| 09***08 | Seal-O-Ring (Id=44.70mm) | 1 |
| 09***95 | Plug | 1 |
| 11***07 | Idler Group-Front; (Front) (C) | 2 |
262-2444 Hood Gp-Engine
| 09***97 | Washer, Spring | 8 |
| 11***07 | Idler Group-Front; (Front) (C) | 2 |
| 12***03 | Sprocket | 2 |
236-9540 Hood Gp-Engine
| 11***17 | Bracket | 4 |
| 23***20 | Step | 4 |
| 23***40 | Hood Group-Engine | 1 |
223-3044 Hood Gp-Engine -Perforated
| 11***17 | Bracket | 4 |
| 22***44 | Hood Group-Engine; -Perforated | 1 |
| 23***20 | Step | 4 |
256-1698 Sheet As-Sound Suppression
| 09***08 | Seal-O-Ring (Id=44.70mm) | 1 |
| 09***95 | Plug | 1 |
| 11***07 | Idler Group-Front; (Front) (C) | 2 |
244-7912 Sheet As-Sound Suppression
| 09***08 | Seal-O-Ring (Id=44.70mm) | 1 |
| 09***95 | Plug | 1 |
| 11***07 | Idler Group-Front; (Front) (C) | 2 |
278-3653 Sheet As-Sound Suppression
| 13***76 | Bolt As-Locking; (M12x1.75x30-mm) | 8 |
| 18***74 | Cover As | 1 |
| 18***75 | Cover As | 1 |
244-7917 Sheet As-Sound Suppression
| 09***08 | Seal-O-Ring (Id=44.70mm) | 1 |
| 09***95 | Plug | 1 |
| 11***07 | Idler Group-Front; (Front) (C) | 2 |
278-3645 Sheet As-Sound Suppression
| 11***12 | Pipe | 16 |
| 18***64 | Support As | 16 |
| 23***74 | Guard As-Track Guide | 4 |
278-3782 Sheet As-Sound Suppression
| 09***55 | Ring-Toric | 2 |
| 11***26 | Idler & Bearing As | 1 |
| 23***62 | Bearing; (Front Idler) | 2 |
236-3387 Sheet As-Sound Suppression
| 09***08 | Seal-O-Ring (Id=44.70mm) | 1 |
| 09***95 | Plug | 1 |
| 11***07 | Idler Group-Front; (Front) (C) | 2 |
278-3656 Sheet As-Sound Suppression
| 13***76 | Bolt As-Locking; (M12x1.75x30-mm) | 8 |
| 18***73 | Cover | 2 |
| 27***56 | Sheet As-Sound Suppression | 1 |
262-2497 Sheet As-Sound Suppression
| 09***08 | Seal-O-Ring (Id=44.70mm) | 1 |
| 09***95 | Plug | 1 |
| 11***07 | Idler Group-Front; (Front) (C) | 2 |
273-7802 Sheet As-Sound Suppression
| 27***02 | Sheet As-Sound Suppression | 1 |
| 7X***63 | Bolt-Plt; (M20 X 2.5 X 60) | 4 |
| 7Y***81 | Guard As-Track Guide | 1 |
244-7922 Sheet As-Sound Suppression
| 09***08 | Seal-O-Ring (Id=44.70mm) | 1 |
| 09***95 | Plug | 1 |
| 09***47 | Nut-Thin; (M16x2 Thd) | 8 |
278-3650 Sheet As-Sound Suppression
| 11***12 | Pipe | 8 |
| 18***64 | Support As | 8 |
| 23***74 | Guard As-Track Guide | 2 |
235-7764 Step Gp
| 10***85 | Seal Group-Duo-Cone | 2 |
| 11***51 | Shaft-Idler | 1 |
| 11***97 | Bearing | 2 |
223-3055 Storage Gp-Vandalism Guard
| 17***98 | Adjustment Group-Hydraulic Track | 2 |
| 19***41 | Idler Group-Front, Cutting Edge; Incl 201-203 | 2 |
| 22***55 | Storage Group-Vandalism Guard | 1 |
262-2461 Support As-Enclosure
| 09***55 | Ring-Toric | 2 |
| 23***62 | Bearing; (Front Idler) | 2 |
| 24***25 | Shaft | 1 |
256-1670 Support As-Enclosure
| 11***96 | Idler Group-Front; (Front) (C) | 1 |
| 19***42 | Cutting Edge; 150 X 2100, Spring Group-Recoil | 1 |
| 25***70 | Support As-Enclosure | 1 |
236-3329 Support As-Enclosure
| 19***41 | Idler Group-Front, Cutting Edge; Incl 201-203 | 2 |
| 23***29 | Support As-Enclosure | 1 |
| 29***50 | Adjustment Group-Hydraulic Track | 2 |
Fuel System
174-9570 Filter Gp-Water Sep & Fuel
| 17***70 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 23***51 | Bolt-Socket Head; (M8x1.25x65-mm) | 2 |
| 32***85 | Injector Group-Fuel | 1 |
268-1835 Injector Gp-Fuel
| 18***23 | Pump As-Fuel Priming | 1 |
| 26***35 | Injector Group-Fuel | 1 |
| 8T***05 | Washer, Flat-Thin(1/4); W/O Freespool Qty Is 12 | 1 |
328-2585 Injector Gp-Fuel
| 25***85 | Lines Group-Fuel | 1 |
| 25***53 | Wiring Group-Fuel System; -Priming Pump | 1 |
| 25***18 | Wiring Group-Cab; -Priming Pump | 1 |
259-3885 Lines Gp-Fuel
| 17***57 | Pump Group-Fuel Transfer | 1 |
| 17***28 | Seal-O-Ring; (Fuel Transfer Pump) | 1 |
| 22***04 | Seal-O-Ring; (Unit Injector Hydraulic Pump) | 1 |
231-3046 Lines Gp-Fuel
| 12***14 | Film-Instruction; (Refueling Pump) | 1 |
| 13***72 | Bolt As; (M12x1.75x20-mm) | 2 |
| 13***73 | Bolt As; (M12x1.75x25-mm) | 4 |
223-3046 Lines Gp-Fuel
| 12***14 | Film-Instruction; (Refueling Pump) | 1 |
| 12***21 | Cover | 1 |
| 13***72 | Bolt As; (M12x1.75x20-mm) | 2 |
191-0461 Lines Gp-Injector Hyd Pump
| 17***57 | Pump Group-Fuel Transfer | 1 |
| 17***28 | Seal-O-Ring; (Fuel Transfer Pump) | 1 |
| 19***61 | Lines Group-Injector Hydraulic Pump | 1 |
229-1859 Pump & Motor Gp-Refueling
| 17***57 | Pump Group-Fuel Transfer | 1 |
| 17***28 | Seal-O-Ring; (Fuel Transfer Pump) | 1 |
| 22***04 | Seal-O-Ring; (Unit Injector Hydraulic Pump) | 1 |
222-5900 Pump & Mtg Gp-Unit Inj Hyd
| 15***36 | Cartridge | 1 |
| 17***28 | Seal-O-Ring; (Fuel Transfer Pump) | 1 |
| 1F***60 | Washer Roll-Over Group To Deck | 1 |
229-1784 Pump Ar-Fuel Transfer
| 08***10 | Spacer; (16.6x32x26-mm Thk) | 4 |
| 13***72 | Bolt As; (M12x1.75x20-mm) | 2 |
| 22***84 | Pump Ar-Fuel Transfer | 1 |
268-1839 Pump Gp-Fuel Injection
| 00***64 | End; (Hose) | 1 |
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 5 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
183-2824 Pump Gp-Fuel Priming -Manual
| 00***64 | End; (Hose) | 1 |
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 5 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
247-7458 Pump Gp-Fuel Priming
| 24***58 | Pump Group-Fuel Priming | 1 |
| 30***67 | Tank Group-Fuel | 1 |
| 30***71 | Tank Group-Fuel | 1 |
188-6121 Pump Gp-Fuel Prm & Prim Filter -With Water Separator
| 00***64 | End; (Hose) | 1 |
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 5 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
190-8977 Pump Gp-Fuel Prm & Water Sep
| 00***64 | End; (Hose) | 1 |
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 5 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
229-1785 Pump Gp-Refueling
| 00***64 | End; (Hose) | 1 |
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 5 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
312-0677 Pump Gp-Unit Injector Hyd
| 31***77 | Pump Group-Unit Injector Hydraulic | 1 |
| 9X***37 | Seal-O-Ring | 1 |
254-4357 Pump Gp-Unit Injector Hyd
| 25***57 | Pump Group-Unit Injector Hydraulic | 1 |
| 32***24 | Tank Group-Fuel | 1 |
| 32***25 | Tank Group-Fuel | 1 |
295-4777 Pump Gp-Unit Injector Hyd
| 00***64 | End; (Hose) | 1 |
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 5 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
304-0677 Pump Gp-Unit Injector Hyd
| 00***64 | End; (Hose) | 1 |
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 5 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
319-0677 Pump Gp-Unit Injector Hyd
| 26***92 | Nut; (M5x0.8-Thd) | 1 |
| 29***57 | Stop | 1 |
| 29***58 | Lever | 1 |
232-0343 Regulator Gp-Fuel Pressure
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 23***43 | Regulator Group-Fuel Pressure | 1 |
262-9372 Strainer Gp-Fuel -Float Gauge
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 21***00 | Back-Up Alarm Assem. | 1 |
223-3037 Tank & Mtg Gp-Fuel
| 08***87 | Grommet | 1 |
| 09***65 | Grommet | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 4 |
303-9866 Tank Gp-Fuel
| 30***66 | Tank Group-Fuel | 1 |
| 31***33 | Camera & Mounting Group; -Work Area Visual System, Rear | 1 |
| 32***96 | Cover | 1 |
259-3875 Tank Gp-Fuel
| 25***75 | Tank Group-Fuel | 1 |
| 6V***22 | Tube-Heat Shrink; (25.4-mm Dia)(10-M) | 0 |
| 7F***60 | Washer | 6 |
303-9867 Tank Gp-Fuel
| 30***87 | Seal/O-Ring, Film Group; -Work Area Visual System, Rear, O Ring Seal, O-Ring | 1 |
| 30***67 | Tank Group-Fuel | 1 |
| 30***20 | Wiring Group-Camera; -Rear Vision Camera | 1 |
303-9871 Tank Gp-Fuel
| 26***42 | Bracket As | 1 |
| 26***21 | Electronics Group-Communication; -Product Link 300 | 1 |
| 30***71 | Tank Group-Fuel | 1 |
223-3038 Tank Gp-Fuel
| 08***87 | Grommet | 1 |
| 09***35 | Spacer; (11x25x20-mm Thk) | 1 |
| 09***65 | Grommet | 1 |
327-3323 Tank Gp-Fuel
| 11***36 | Clip | 1 |
| 23***40 | Film; (Warning) (Product Link, Ansi) (On Lh Front Post Inside Cab) | 1 |
| 23***41 | Film-Warning; (Product Link Radio, Intl) | 1 |
259-3872 Tank Gp-Fuel
| 17***29 | Cable As | 1 |
| 1M***19 | Bolt; (5/16-18x1.375-In)(5/16-18x1.375 In) | 1 |
| 1M***20 | Nut-Battery Terminal (5/16-18 Thd); (5/16-18-Thd)(5/16-18x1.375 In) | 1 |
139-6873 Valve Gp-Fuel Bypass -Filter
| 10***28 | Spacer-Special; (12.7x26x28.7-mm Thk) | 4 |
| 13***00 | Clip; (Tab) | 1 |
| 13***73 | Valve Group-Fuel Bypass; -Filter | 1 |
298-3147 Valve Gp-Fuel Shutoff
| 22***74 | Control Group-Unprogrammed | 1 |
| 29***47 | Valve Group-Fuel Shutoff | 1 |
| 9X***80 | Bolt (45mm Long); (M6x1x45-mm) | 4 |
Hydraulic System
145-5106 Accumulator Gp-Hydraulic -Charged
| 14***06 | Accumulator Group-Hydraulic; -Charged | 1 |
| 16***95 | Seal; (Id=93.00mm) | 2 |
| 22***72 | Cylinder Group-Boom | 1 |
4i-1536 Accumulator Gp-Hydraulic -Charged
| 23***27 | Lines Group-Bucket Cylinder | 1 |
| 28***11 | Cylinder & Seal Group-Bucket | 1 |
| 4I***36 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
087-4454 Accumulator Gp-Hydraulic -Charged
| 08***54 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 23***67 | Lines Group-Stick Cylinder | 1 |
| 28***93 | Cylinder & Seal Group-Stick | 1 |
5i-8416 Accumulator Gp-Hydraulic -Charged
| 22***74 | Cylinder & Seal Group-Stick | 1 |
| 23***67 | Lines Group-Stick Cylinder | 1 |
| 5I***16 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
164-6981 Accumulator Gp-Hydraulic -Charged
| 16***81 | Accumulator Group-Hydraulic; -Charged | 1 |
| 16***95 | Seal; (Id=93.00mm) | 2 |
| 29***00 | Cylinder Group-Boom | 1 |
180-9419 Accumulator Gp-Hydraulic -Uncharged
| 16***95 | Seal; (Id=93.00mm) | 2 |
| 18***19 | Accumulator Group-Hydraulic; -Uncharged | 1 |
| 29***98 | Cylinder Group-Boom | 1 |
227-8807 Accumulator Gp-Hydraulic -Uncharged
| 16***94 | Seal; (Id=79.85mm) | 2 |
| 16***96 | Seal; (Id=99.85mm) | 2 |
| 22***07 | Accumulator Group-Hydraulic; -Uncharged | 1 |
199-7447 Accumulator Gp-Hydraulic -Uncharged
| 16***95 | Seal; (Id=93.00mm) | 2 |
| 19***47 | Accumulator Group-Hydraulic; -Uncharged-Pilot Oil | 1 |
| 23***79 | Seal; (Lip Type) (69.85mm Id) | 2 |
087-4456 Accumulator Gp-Hydraulic -Charged
| 08***56 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 20***06 | Cylinder Group-Boom | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
256-0074 Actuator Gp-Pump -Drive
| 16***94 | Seal; (Id=79.85mm) | 4 |
| 22***75 | Cylinder Group-Stick | 1 |
| 25***74 | Actuator Group-Pump; -Drive | 1 |
256-0077 Actuator Gp-Pump -Driven
| 08***31 | Stop | 1 |
| 08***34 | Head | 1 |
| 08***36 | Ring-Backup | 1 |
173-3503 Base Gp-Oil Filter -Hydraulic
| 08***31 | Stop | 1 |
| 08***34 | Head | 1 |
| 08***36 | Ring-Backup | 1 |
282-2350 Block Gp-Hydraulic -Boom Cylinder Lines
| 08***31 | Stop | 1 |
| 08***34 | Head | 1 |
| 08***36 | Ring-Backup | 1 |
270-5687 Control Ar-Auxiliary -Joystick, 2-Bn, Slide, Trig Sw
| 09***29 | Ring; (Retaining) | 2 |
| 09***33 | Seal-O-Ring (Id=139.60mm) | 1 |
| 10***78 | Ring; (Retaining) | 1 |
297-0493 Control Ar-Auxiliary -System 17, Combined Fn, Med Pr
| 09***75 | Seal; (Id=56.70mm) | 1 |
| 09***18 | Ring-Back Up | 1 |
| 09***28 | Seal-O-Ring (Id=109.60mm) | 1 |
270-6106 Control Ar-Auxiliary -Foot Switch
| 09***29 | Ring; (Retaining) | 2 |
| 09***33 | Seal-O-Ring (Id=139.60mm) | 1 |
| 10***78 | Ring; (Retaining) | 1 |
255-5811 Control Ar-Auxiliary -Medium Pressure
| 09***33 | Seal-O-Ring (Id=139.60mm) | 1 |
| 11***60 | Bearing; (Sleeve) | 1 |
| 12***65 | Seal; (Id=104.00mm) | 1 |
255-5843 Control Ar-Auxiliary -Joystick With Slide Control
| 08***31 | Stop | 1 |
| 09***72 | Ring; (Retaining) | 1 |
| 09***30 | Ring-Retaining; (External) | 2 |
282-2349 Control Ar-Load -Boom Float
| 09***75 | Pin, Roller | 2 |
| 09***80 | Seal-O-Ring | 1 |
| 09***21 | Seal-O-Ring | 1 |
239-6598 Coupling Gp-Pump
| 09***30 | Ring; (Retaining) | 2 |
| 09***31 | Ring - Retaining | 1 |
| 09***11 | Washer; (47.3x76x1-mm Thk) | 6 |
230-4360 Cover Gp-Valve -Main Control Valve
| 17***74 | Motor & Mtg Group-Swing | 1 |
| 19***93 | Drive Group-Swing; -Without Motor | 1 |
| 23***60 | Cover Group-Valve; -Main Control Valve | 1 |
331-4920 Cover Gp-Valve
| 09***55 | Pin | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 2B***61 | Cork-- Compression Release Shaft Hole | 2 |
241-7632 Cover Gp-Valve -Main Control Valve
| 09***55 | Pin | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 24***32 | Cover Group-Valve; -Main Control Valve | 1 |
289-7982 Cylinder & Lines Gp-Boom -Rh
| 09***84 | Seal-O-Ring (Id=15.80mm) | 3 |
| 10***36 | Seal-O-Ring; (49.28mm Id) | 1 |
| 12***13 | Filter-Oil; (Ultra High Efficiency)(Hydraulic, Pilot) | 1 |
225-4570 Cylinder & Lines Gp-Boom -Rh
| 18***84 | Filter & Valve Group-Pilot; -Hydraulic Oil | 1 |
| 22***70 | Cylinder & Lines Group-Boom; -Rh | 1 |
| 28***36 | Filter & Valve Group-Pilot; -Hydraulic Oil | 1 |
289-7981 Cylinder & Lines Gp-Boom -Lh
| 21***09 | Valve Group-Pilot Relief; -Hydraulic Filter | 1 |
| 28***81 | Cylinder & Lines Group-Boom; -Lh, Cover Plate | 1 |
| 5I***70 | Filter-Oil; (Advanced Efficiency)(Hydraulic, Pilot) | 1 |
225-4569 Cylinder & Lines Gp-Boom -Lh
| 09***55 | Pin | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 22***69 | Cylinder & Lines Group-Boom; -Lh | 1 |
289-8002 Cylinder & Lines Gp-Bucket -Cb2-Family
| 21***09 | Valve Group-Pilot Relief; -Hydraulic Filter | 1 |
| 28***02 | Cylinder & Lines Group-Bucket; -Cb2-Family | 1 |
| 5I***70 | Filter-Oil; (Advanced Efficiency)(Hydraulic, Pilot) | 1 |
289-8010 Cylinder & Lines Gp-Bucket -Db-Family
| 09***21 | Filter-Oil; (Advanced Efficiency)(Hydraulic, Case Drain) | 1 |
| 12***76 | Base As; (Oil Filter) | 1 |
| 28***10 | Cylinder & Lines Group-Bucket; -Db-Family | 1 |
289-7992 Cylinder & Lines Gp-Stick
| 09***81 | Seal-O-Ring | 1 |
| 13***23 | Seal-O-Ring | 4 |
| 13***24 | Screw; (M3x0.5x5-mm) | 8 |
225-4573 Cylinder & Lines Gp-Stick
| 12***03 | Seal-O-Ring (Id=185mm) | 2 |
| 12***34 | Valve As-Bypass | 1 |
| 15***84 | Seal-O-Ring | 1 |
225-4571 Cylinder & Seal Gp-Boom
| 11***34 | Tee-O-Ring | 1 |
| 21***01 | Tee As; (Fabricated Tee) | 1 |
| 21***19 | Connector As; (Tee & Reducer) | 1 |
203-3927 Cylinder & Seal Gp-Boom
| 09***21 | Filter-Oil; (Advanced Efficiency)(Hydraulic, Case Drain) | 1 |
| 20***27 | Cylinder & Seal Group-Boom | 1 |
| 28***95 | Head As-Filter | 1 |
289-7983 Cylinder & Seal Gp-Boom
| 16***60 | Hose Group-Hydraulic; (Control Valve, Stick) | 1 |
| 19***76 | Hose Group-Hydraulic; -Control Valve, Stick | 1 |
| 28***83 | Cylinder & Seal Group-Boom, Hexagon Flange Nut | 1 |
289-8003 Cylinder & Seal Gp-Bucket
| 14***65 | Tube As | 1 |
| 16***65 | Hose As | 1 |
| 28***03 | Cylinder & Seal Group-Bucket | 1 |
289-8011 Cylinder & Seal Gp-Bucket
| 19***78 | Hose Group-Hydraulic; -Control Valve, Stick | 1 |
| 19***79 | Hose Group-Hydraulic; -Control Valve, Stick | 1 |
| 28***11 | Cylinder & Seal Group-Bucket | 1 |
282-4947 Cylinder & Seal Gp-Hydraulic -Fore Boom
| 16***61 | Hose As | 1 |
| 1P***77 | Flange-Half (For Tilt Ports On Valve) | 2 |
| 28***47 | Cylinder & Seal Group-Hydraulic; -Fore Boom | 1 |
289-7993 Cylinder & Seal Gp-Stick
| 19***81 | Hose Group-Hydraulic; -Control Valve, Boom | 1 |
| 19***82 | Hose Group-Hydraulic; -Control Valve, Boom | 1 |
| 28***93 | Cylinder & Seal Group-Stick | 1 |
225-4574 Cylinder & Seal Gp-Stick
| 14***64 | Tube As | 1 |
| 16***69 | Hose As | 1 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 1 |
203-3906 Cylinder Gp-Boom
| 16***62 | Hose As | 1 |
| 1P***77 | Flange-Half (For Tilt Ports On Valve) | 2 |
| 20***06 | Cylinder Group-Boom | 1 |
295-9400 Cylinder Gp-Boom
| 22***48 | Lines Group-Pump; -Supply | 1 |
| 22***65 | Tank & Mtg Group-Hydraulic | 1 |
| 23***15 | Pump & Mtg Group-Main Hydraulic | 1 |
295-9398 Cylinder Gp-Boom
| 22***43 | Lines Group-Travel Motor; -Long Undercarriage | 1 |
| 22***48 | Lines Group-Pump; -Supply | 1 |
| 22***65 | Tank & Mtg Group-Hydraulic | 1 |
225-4572 Cylinder Gp-Boom
| 11***79 | Flange-Special | 1 |
| 16***73 | Hose As | 1 |
| 16***23 | Tube As | 1 |
315-4451 Cylinder Gp-Bucket
| 18***17 | Tube As | 1 |
| 18***18 | Tube As | 1 |
| 18***19 | Tube As | 1 |
289-8004 Cylinder Gp-Bucket
| 24***26 | Lines Group-Pilot; -Travel | 1 |
| 24***27 | Lines Group-Pilot; -Control Valve, Pump | 1 |
| 26***68 | Mounting Group-Main Control Valve | 1 |
283-6132 Cylinder Gp-Bucket
| 22***48 | Lines Group-Pump; -Supply | 1 |
| 22***65 | Tank & Mtg Group-Hydraulic | 1 |
| 23***15 | Pump & Mtg Group-Main Hydraulic | 1 |
279-8111 Cylinder Gp-Hydraulic -Fore Boom
| 18***93 | Clip | 5 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 3 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 1 |
289-7994 Cylinder Gp-Stick
| 11***25 | Support As | 1 |
| 11***85 | Support As | 1 |
| 11***87 | Tube As | 1 |
225-4575 Cylinder Gp-Stick
| 11***25 | Support As | 1 |
| 11***85 | Support As | 1 |
| 11***86 | Tube As | 1 |
233-8502 Cylinder Gp-Undercarriage -Adjustable Gauge
| 1P***03 | Seal - Rectangular (31.86mm Id) | 1 |
| 23***02 | Cylinder Group-Undercarriage; -Adjustable Gauge | 1 |
| 23***97 | Tube As | 1 |
191-5537 Drive Gp-Auxiliary Pump
| 11***78 | Support As | 1 |
| 11***79 | Support As | 1 |
| 19***37 | Drive Group-Auxiliary Pump; (Auxiliary Pump) | 1 |
191-2693 Drive Gp-Swing -Without Motor
| 09***83 | Nut-Self-Locking; (M10x1.50 Thd) | 2 |
| 10***02 | Bolt-Socket Head; (M12x1.75x30-mm) | 8 |
| 14***67 | Clamp; (Hose) | 2 |
199-4487 Drive Gp-Swing -With Motor
| 10***97 | Bolt-Socket Head; (M12x1.75x50-mm) | 4 |
| 10***03 | Bolt; (Socket Head) (M10x1.5x80mm) | 2 |
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 18 |
212-8781 Fastener Gp-Swing & Final Dr
| 10***98 | Name-Plate (Type Of Machine:Ex1100), Bolt-Socket Head; (M10x1.5x40-mm) | 4 |
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 4 |
| 10***50 | Clamp | 1 |
171-9412 Fastener Gp-Swing & Final Dr
| 10***97 | Bolt-Socket Head; (M12x1.75x50-mm) | 4 |
| 10***03 | Bolt; (Socket Head) (M10x1.5x80mm) | 2 |
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 26 |
220-3354 Fastener Gp-Swing Drive
| 10***98 | Name-Plate (Type Of Machine:Ex1100), Bolt-Socket Head; (M10x1.5x40-mm) | 4 |
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 4 |
| 10***50 | Clamp | 1 |
158-8987 Filter & Valve Gp-Pilot -Hydraulic Oil
| 10***97 | Bolt-Socket Head; (M12x1.75x50-mm) | 4 |
| 10***03 | Bolt; (Socket Head) (M10x1.5x80mm) | 2 |
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 42 |
289-7836 Filter & Valve Gp-Pilot -Hydraulic Oil
| 09***32 | Seal-O-Ring (Id=28.24mm) | 2 |
| 10***01 | Bolt-Socket Head; (M10x1.5x20-mm) | 8 |
| 10***02 | Bolt-Socket Head; (M12x1.75x30-mm) | 4 |
188-2084 Filter & Valve Gp-Pilot -Hydraulic Oil
| 09***32 | Seal-O-Ring (Id=28.24mm) | 2 |
| 10***01 | Bolt-Socket Head; (M10x1.5x20-mm) | 8 |
| 10***02 | Bolt-Socket Head; (M12x1.75x30-mm) | 4 |
188-4140 Filter Gp-Oil -Hydraulic Return
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
| 16***69 | Adapter Assembly | 1 |
| 18***40 | Filter Group-Oil; -Hydraulic, Return | 1 |
289-8194 Filter Gp-Oil -Hydraulic, Case Drain
| 13***56 | Tube As | 1 |
| 14***96 | Hose As | 1 |
| 16***06 | Flange | 2 |
188-4142 Filter Gp-Oil -Hydraulic Return
| 10***97 | Bolt-Socket Head; (M12x1.75x50-mm) | 4 |
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 8 |
| 11***04 | Bolt-Socket Head; (M12x1.75x45-mm) | 4 |
126-2075 Filter Gp-Oil -Hyraulic Oil-Hydraulic, Case Drain
| 12***75 | Filter Group-Oil; -Hyraulic Oil-Hydraulic, Case Drain | 1 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
| 16***69 | Adapter Assembly | 1 |
214-4512 Fitting Gp-Hydraulic
| 09***83 | Nut-Self-Locking; (M10x1.50 Thd) | 6 |
| 21***12 | Fitting Group-Hydraulic | 1 |
| 23***23 | Support | 1 |
227-0620 Gauge Gp-Sight -Hydraulic Oil Level
| 08***72 | Hose As (Nom 06, L=1000mm) | 1 |
| 22***20 | Gauge Group-Sight; -Hydraulic Oil Level | 1 |
| 6V***29 | Cap As | 2 |
194-0180 Hose Gp-Hydraulic -Control Valve, Boom
| 08***56 | 90 Degrees Elbow | 1 |
| 08***23 | Hose As | 1 |
| 14***36 | Pin-Connector; (14-Ga To 18-Ga) | 3 |
194-0176 Hose Gp-Hydraulic -Control Valve, Stick
| 08***02 | Hose As. | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***31 | Connector-Filter | 1 |
194-0181 Hose Gp-Hydraulic -Control Valve, Boom
| 08***56 | 90 Degrees Elbow | 1 |
| 08***23 | Hose As | 1 |
| 14***36 | Pin-Connector; (14-Ga To 18-Ga) | 3 |
194-0179 Hose Gp-Hydraulic -Control Valve, Stick
| 08***56 | 90 Degrees Elbow | 1 |
| 08***23 | Hose As | 1 |
| 09***77 | Ring-Back Up | 1 |
194-0182 Hose Gp-Hydraulic -Control Valve, Boom
| 08***05 | Hose As | 1 |
| 08***83 | Hose As (Nom 06, L=2530mm) | 2 |
| 10***03 | Hose As (Nom 06, L=2600mm) | 2 |
194-0178 Hose Gp-Hydraulic -Control Valve, Stick
| 08***11 | Hose As (Nom 06, L=450mm) | 1 |
| 08***31 | Hose As (Nom 06, L=600mm) | 2 |
| 08***34 | Hose As | 1 |
194-0174 Hose Gp-Hydraulic -Control Valve, Stick
| 08***02 | Hose As. | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***31 | Connector-Filter | 1 |
194-0177 Hose Gp-Hydraulic -Control Valve, Stick
| 08***80 | Hose As (Nom 06, L=2550mm) | 1 |
| 10***71 | Hose As (Nom 06, L=2430mm) | 1 |
| 10***03 | Hose As (Nom 06, L=2600mm) | 1 |
259-7730 Hydraulic Ar
| 08***02 | Hose As. | 1 |
| 08***66 | Hose As | 1 |
| 12***03 | Valve Group-Solenoid; -Variable Adjustable Boom | 1 |
306-5843 Hydraulic Ar -Coal Shovel
| 08***56 | 90 Degrees Elbow | 1 |
| 08***03 | Hose As (Nom 06, L=2300mm) | 1 |
| 08***91 | Hose As (Nom 06, L=2800mm) | 1 |
277-8254 Hydraulic Ar -Heavy Lift
| 08***56 | 90 Degrees Elbow | 1 |
| 08***11 | Hose As (Nom 06, L=450mm) | 1 |
| 08***67 | Hose As (Nom 06, L=700mm) | 2 |
331-4924 Hydraulic Ar -2-Way Valve
| 08***02 | Hose As. | 1 |
| 08***62 | Hose As | 1 |
| 08***65 | Hose As (Nom 06, L=570mm) | 2 |
294-5673 Hydraulic Ar
| 08***56 | 90 Degrees Elbow | 1 |
| 08***03 | Hose As (Nom 06, L=2300mm) | 1 |
| 08***91 | Hose As (Nom 06, L=2800mm) | 1 |
227-0550 Lines Gp-Boom -1-Piece Long Boom
| 17***07 | Hose As | 2 |
| 22***50 | Lines Group-Boom; -1-Piece Long Boom | 1 |
| 4I***03 | Hose As (Nom 06, L=2650mm) | 2 |
227-0551 Lines Gp-Boom -1-Piece Short Boom
| 08***56 | 90 Degrees Elbow | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 2 |
255-2051 Lines Gp-Boom Cylinder -Lh
| 10***99 | Hose As | 1 |
| 12***08 | Guard | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
255-2052 Lines Gp-Boom Cylinder -Rh
| 08***87 | Grommet | 1 |
| 08***80 | Hose As (Nom 06, L=2550mm) | 1 |
| 10***71 | Hose As (Nom 06, L=2430mm) | 1 |
239-1627 Lines Gp-Bucket Cylinder
| 08***11 | Hose As (Nom 06, L=450mm) | 1 |
| 08***41 | Hose As. | 1 |
| 08***31 | Hose As (Nom 06, L=600mm) | 3 |
227-0573 Lines Gp-Bucket Cylinder
| 08***11 | Hose As (Nom 06, L=450mm) | 1 |
| 08***41 | Hose As. | 1 |
| 08***31 | Hose As (Nom 06, L=600mm) | 3 |
331-4923 Lines Gp-Control -Front Valve
| 08***11 | Hose As (Nom 06, L=450mm) | 1 |
| 08***41 | Hose As. | 1 |
| 08***31 | Hose As (Nom 06, L=600mm) | 3 |
248-9831 Lines Gp-Control -Control Valve, Pump
| 12***31 | Body-Valve | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 1 |
277-8257 Lines Gp-Control -Control Valve
| 08***11 | Hose As (Nom 06, L=450mm) | 1 |
| 08***41 | Hose As. | 1 |
| 08***31 | Hose As (Nom 06, L=600mm) | 2 |
331-4921 Lines Gp-Cylinder
| 13***13 | Band; (Marker) (Gray, P) | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
282-2351 Lines Gp-Front
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***77 | Bolt-Socket Head; (M10x1.5x45-mm) | 4 |
| 10***24 | Bolt-Socket Head; (M12x1.75x100-mm) | 4 |
245-5178 Lines Gp-Front -Boom Cylinder
| 08***11 | Hose As (Nom 06, L=450mm) | 1 |
| 08***31 | Hose As (Nom 06, L=600mm) | 2 |
| 08***34 | Hose As | 1 |
255-1766 Lines Gp-Front -Medium Flow
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***77 | Bolt-Socket Head; (M10x1.5x45-mm) | 4 |
| 10***24 | Bolt-Socket Head; (M12x1.75x100-mm) | 4 |
255-1764 Lines Gp-Front -System 17, Combined Fn, Med Pr
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 14***54 | Elbow; (45) (-8/-8 Orb/Orfs) | 2 |
245-5179 Lines Gp-Front -Control Valve, Front
| 08***56 | 90 Degrees Elbow | 1 |
| 08***03 | Hose As (Nom 06, L=2300mm) | 1 |
| 08***91 | Hose As (Nom 06, L=2800mm) | 1 |
241-8376 Lines Gp-Front -Coal Shovel
| 08***02 | Hose As. | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***31 | Connector-Filter | 1 |
230-4445 Lines Gp-Hydraulic
| 14***38 | Adapter, -6 Orb / Orfs X-Long | 1 |
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 1 |
| 14***55 | Elbow As. | 1 |
248-9833 Lines Gp-Hydraulic Oil Cooler
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 3 |
| 17***96 | Receptacle As | 1 |
| 22***59 | Sensor As-Pressure; (1-Pump/2-Pump, 1-Way Flow) | 1 |
248-9827 Lines Gp-Pilot -Control Valve, Pump
| 10***18 | Grommet | 4 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 2 |
306-5936 Lines Gp-Pilot -Coal Shovel
| 23***15 | Kit-Seal; (Swivel) | 1 |
| 30***36 | Lines Group-Pilot; -Coal Shovel | 1 |
266-1255 Lines Gp-Pilot -Control Valve, Pump
| 08***42 | Valve | 1 |
| 08***43 | Stopper | 2 |
| 08***57 | Piston | 2 |
255-1723 Lines Gp-Pilot -Boom Float
| 12***91 | Valve Group-Solenoid; -Hydraulic Activation Control | 3 |
| 19***96 | Valve-Check | 1 |
| 19***99 | Spring | 1 |
287-8669 Lines Gp-Pilot -Load Control
| 23***98 | Coupling Group-Pump | 1 |
| 27***59 | Pump Group-Main Hydraulic | 1 |
| 28***69 | Lines Group-Pilot; -Load Control | 1 |
277-8256 Lines Gp-Pilot -Control Manifold
| 14***08 | Plug As. | 1 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 4 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
297-6338 Lines Gp-Pilot -Boom Float
| 09***25 | Seal-O-Ring (Id=89.60mm) | 3 |
| 09***16 | Seal-O-Ring (Id=109.40mm) | 1 |
| 15***82 | Seal | 5 |
255-1877 Lines Gp-Pilot -Control Valve, Travel Valve
| 09***07 | Bolt; (M16x2x120-mm) | 3 |
| 20***19 | Valve Group-Travel Counterbalance | 1 |
| 21***52 | Motor Group-Travel | 1 |
237-2267 Lines Gp-Pilot
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
| 1P***03 | Seal - Rectangular (31.86mm Id) | 1 |
| 23***67 | Lines Group-Pilot | 1 |
248-9826 Lines Gp-Pilot -Travel
| 10***18 | Grommet | 4 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 2 |
255-1969 Lines Gp-Pilot -Medium Pressure
| 18***30 | Valve Group-Relief; -Swing Motor | 2 |
| 18***75 | Motor Group-Swing | 1 |
| 25***69 | Lines Group-Pilot; -Medium Pressure | 1 |
248-9829 Lines Gp-Pilot -Pump
| 16***88 | Swivel Group | 1 |
| 19***20 | Hose As | 2 |
| 19***21 | Hose As | 2 |
255-1657 Lines Gp-Pilot -Alt Pattern Control, 2-Way
| 16***43 | Connector | 2 |
| 17***97 | Valve; (Lock) | 1 |
| 17***00 | Hose As | 2 |
289-2190 Lines Gp-Pilot -Travel
| 09***39 | Spring | 1 |
| 12***84 | Rod | 1 |
| 20***00 | Screen As; (Hydraulic Tank) | 1 |
289-2189 Lines Gp-Pilot -Third Pedal, Drain
| 09***75 | Pin, Roller | 7 |
| 09***82 | Plug, Tapered | 16 |
| 09***46 | Ring; (Retaining) | 2 |
241-8375 Lines Gp-Pilot -Control Valve
| 11***78 | Support As | 1 |
| 11***79 | Support As | 1 |
| 1P***04 | Seal - Rectangular (45mm Dia) | 1 |
255-1659 Lines Gp-Pilot -Heavy Lift
| 16***41 | Hose As | 2 |
| 16***42 | Hose As | 2 |
| 16***43 | Connector | 2 |
294-5678 Lines Gp-Pilot -Control Valve, Pump
| 09***67 | Cap, Flange | 4 |
| 09***99 | Seal-O-Ring | 4 |
| 09***25 | Seal-O-Ring (Id=89.60mm) | 3 |
275-1495 Lines Gp-Pilot -Cab
| 27***95 | Lines Group-Pilot; -Cab | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
| 6E***15 | Plug | 1 |
255-1662 Lines Gp-Pilot -System 14, System 17
| 23***97 | Manifold Group-Control; -Pilot Oil Supply | 1 |
| 23***98 | Manifold Group-Control; -Pilot Oil Supply | 1 |
| 25***62 | Lines Group-Pilot; -System 14, System 17 | 1 |
269-9826 Lines Gp-Pilot -To Pilot Valve, Var Adj Boom
| 26***26 | Lines Group-Pilot; -To Pilot Valve, Var Adj Boom | 1 |
| 6E***45 | Seal-O-Ring | 1 |
| 9T***06 | Plug | 1 |
255-2031 Lines Gp-Pilot -Control Valve
| 09***00 | Seal-O-Ring (Id=33.70mm) | 2 |
| 09***33 | Seal-Lip Type | 1 |
| 09***11 | Pin; (Spring) | 2 |
248-9825 Lines Gp-Pilot -Joystick, Pedals
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 1 |
| 14***55 | Elbow As. | 1 |
266-1254 Lines Gp-Pilot -Travel
| 26***54 | Lines Group-Pilot; -Travel | 1 |
| 32***13 | Kit-Seal; (Travel Motor) | 1 |
255-1843 Lines Gp-Pilot -Third Pedal, Pilot Valve
| 17***75 | Motor Group-Swing | 1 |
| 25***43 | Lines Group-Pilot; -Third Pedal, Pilot Valve | 1 |
| 6V***04 | Circlip - External | 1 |
227-0548 Lines Gp-Pump -Supply
| 18***40 | Swivel; (Electric) | 1 |
| 22***48 | Lines Group-Pump; -Supply | 1 |
| 23***09 | Swivel Group | 1 |
248-9832 Lines Gp-Pump -Medium Flow
| 15***87 | Filter & Valve Group-Pilot; -Hydraulic Oil | 1 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
| 16***90 | Valve As-Fluid Sampling; (Coolant) | 1 |
285-5266 Lines Gp-Return -Load Control
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
| 25***78 | Valve Group-Control; -Auxiliary | 1 |
| 28***41 | Valve Group-Main Control; -Heavy Lift | 1 |
294-5677 Lines Gp-Return -Case Drain
| 25***80 | Valve Group-Swing Cushion; -Fine Swing | 1 |
| 29***77 | Lines Group-Return; -Case Drain | 1 |
248-9830 Lines Gp-Return -Filters
| 09***26 | Lockwasher-Tooth; (M4 Id) | 2 |
| 09***08 | Seal-O-Ring (Id=44.70mm) | 1 |
| 09***35 | Seal-O-Ring (Id=229.30mm) | 1 |
245-5186 Lines Gp-Sensor -Overload Warning Device
| 09***47 | Seal-O-Ring | 1 |
| 17***13 | Valve As | 1 |
| 18***33 | Valve As | 1 |
196-0536 Lines Gp-Stick
| 09***01 | Seal-O-Ring (Id=34.70mm) | 1 |
| 09***02 | Seal-O-Ring | 1 |
| 09***00 | Seal - O-Ring (34.40 mm Id) | 1 |
236-2967 Lines Gp-Stick Cylinder
| 09***85 | Seal- -O-Ring (17.80 mm Id) | 1 |
| 09***01 | Seal-O-Ring (Id=34.70mm) | 1 |
| 09***02 | Seal-O-Ring | 1 |
277-8255 Lines Gp-Swing Drive -Without Swivel
| 10***93 | Spring | 2 |
| 10***94 | Spring | 1 |
| 10***96 | Spring | 1 |
294-5676 Lines Gp-Swing Motor
| 10***93 | Spring | 3 |
| 10***94 | Spring | 1 |
| 10***96 | Spring | 1 |
234-7139 Lines Gp-Travel Motor
| 09***75 | Seal - O-Ring (7.80 mm Id) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 3 |
| 09***03 | Seal-O-Ring | 1 |
227-0543 Lines Gp-Travel Motor
| 09***90 | Seal-O-Ring (Id=21.80mm) | 5 |
| 09***87 | Ring, Back-Up; (Buck Up) | 5 |
| 10***52 | Valve Group-Relief; -Negative Flow Control | 1 |
232-0303 Lines Gp-Travel Motor
| 09***75 | Seal - O-Ring (7.80 mm Id) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 3 |
| 09***03 | Seal-O-Ring | 1 |
234-7141 Lines Gp-Travel Motor
| 09***75 | Seal - O-Ring (7.80 mm Id) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 3 |
| 09***03 | Seal-O-Ring | 1 |
230-4417 Lines Gp-Travel Motor -Upper
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
| 09***87 | Ring, Back-Up; (Buck Up) | 1 |
| 15***59 | Housing | 1 |
248-5904 Lines Gp-Travel Motor
| 10***93 | Spring | 2 |
| 10***94 | Spring | 1 |
| 10***96 | Spring | 1 |
227-0544 Lines Gp-Travel Motor
| 09***75 | Seal - O-Ring (7.80 mm Id) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 3 |
| 09***03 | Seal-O-Ring | 1 |
239-8697 Manifold Gp-Control -Pilot Oil Supply
| 23***97 | Manifold Group-Control; -Pilot Oil Supply | 1 |
| 26***03 | Valve Group-Relief; (160-Bar) (2321-Psi) | 2 |
| 28***77 | Valve Group-Relief; (230-Bar) (3336-Psi) | 2 |
239-8998 Manifold Gp-Control -Pilot Oil Supply
| 10***93 | Spring | 1 |
| 15***76 | Bolt-Special | 1 |
| 23***98 | Manifold Group-Control; -Pilot Oil Supply | 1 |
215-5037 Manifold Gp-Control -Pilot Oil Supply
| 09***90 | Seal-O-Ring (Id=21.80mm) | 5 |
| 09***87 | Ring, Back-Up; (Buck Up) | 5 |
| 10***52 | Valve Group-Relief; -Negative Flow Control | 1 |
179-9774 Motor & Mtg Gp-Swing
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
| 09***87 | Ring, Back-Up; (Buck Up) | 1 |
| 15***59 | Housing | 1 |
204-2674 Motor & Mtg Gp-Travel
| 09***94 | Seal-O-Ring (Id=25.70mm) | 2 |
| 09***89 | Ring, Back-Up | 2 |
| 12***97 | Ring | 2 |
179-9775 Motor Gp-Swing
| 09***94 | Seal-O-Ring (Id=25.70mm) | 2 |
| 09***89 | Ring, Back-Up | 2 |
| 12***97 | Ring | 2 |
334-9971 Motor Gp-Swing
| 08***66 | Spring | 1 |
| 09***94 | Seal-O-Ring (Id=25.70mm) | 1 |
| 09***89 | Ring, Back-Up | 1 |
334-9978 Motor Gp-Swing
| 09***87 | Seal-O-Ring (Id=20.80mm) | 2 |
| 09***86 | Ring-Back Up; (Backup) | 2 |
| 12***98 | Plate | 1 |
188-4175 Motor Gp-Swing
| 08***66 | Spring | 1 |
| 09***94 | Seal-O-Ring (Id=25.70mm) | 1 |
| 09***89 | Ring, Back-Up | 1 |
152-0948 Motor Gp-Travel
| 15***48 | Motor Group-Travel | 1 |
| 15***13 | Valve Group-Relief; -Negative Flow Control | 1 |
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
215-9952 Motor Gp-Travel
| 21***52 | Motor Group-Travel | 1 |
| 24***32 | Cover Group-Valve; -Main Control Valve | 1 |
| 28***41 | Valve Group-Main Control; -Heavy Lift | 1 |
152-0921 Motor Gp-Travel
| 15***21 | Motor Group-Travel | 1 |
| 15***13 | Valve Group-Relief; -Negative Flow Control | 1 |
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
266-1161 Mounting Gp-Main Control Valve
| 26***61 | Mounting Group-Main Control Valve | 1 |
| 28***41 | Valve Group-Main Control; -Heavy Lift | 1 |
| 33***20 | Cover Group-Valve | 1 |
260-7868 Mounting Gp-Main Control Valve
| 15***13 | Valve Group-Relief; -Negative Flow Control | 1 |
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
| 26***68 | Mounting Group-Main Control Valve | 1 |
6e-4816 Plug Gp-Control Valve
| 08***10 | Setscrew; (M10x21-mm) | 4 |
| 08***08 | Pedal | 2 |
| 08***09 | Bellows | 2 |
6e-2746 Plug Gp-Control Valve
| 09***76 | Seal | 4 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 4 |
| 09***28 | Sleeve | 4 |
106-6248 Plug Gp-Control Valve
| 10***48 | Plug Group-Control Valve | 1 |
| 11***83 | Seal-Rubber | 1 |
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 4 |
6e-4793 Plug Gp-Control Valve
| 09***76 | Seal | 4 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 4 |
| 09***28 | Sleeve | 4 |
338-7340 Plug Gp-Swivel
| 09***76 | Seal | 4 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 4 |
| 09***28 | Sleeve | 4 |
200-3365 Pump & Mtg Gp-Auxiliary
| 08***10 | Setscrew; (M10x21-mm) | 4 |
| 08***08 | Pedal | 2 |
| 09***73 | Bolt; (Socket Head) (M12x1.75x60mm) | 2 |
233-1115 Pump & Mtg Gp-Main Hydraulic
| 09***84 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
| 09***96 | Seal-O-Ring (Id=28.70mm) | 1 |
240-2998 Pump Gp-Gear -Auxiliary
| 09***80 | Seal-O-Ring (Id=11.80mm) | 2 |
| 09***82 | Seal-O-Ring (Id=13.80mm) | 2 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 2 |
349-4087 Pump Gp-Gear
| 09***80 | Seal-O-Ring (Id=11.80mm) | 2 |
| 09***82 | Seal-O-Ring (Id=13.80mm) | 2 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 2 |
272-6959 Pump Gp-Main Hydraulic
| 10***89 | Seal-O-Ring | 2 |
| 10***73 | Seal-O-Ring | 2 |
| 14***74 | Valve | 1 |
259-0922 Screen Gp-Hydraulic -Tank
| 14***74 | Valve | 1 |
| 14***77 | Pin | 1 |
| 15***86 | Spring | 1 |
166-3088 Swivel Gp
| 10***70 | Spring | 1 |
| 10***71 | Valve | 1 |
| 16***88 | Swivel Group | 1 |
234-4440 Swivel Gp
| 10***70 | Spring | 1 |
| 10***71 | Valve | 1 |
| 23***40 | Swivel Group | 1 |
234-7109 Swivel Gp
| 10***67 | Valve Group-Relief; -Negative Flow Control | 1 |
| 15***39 | Cover | 1 |
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
234-7114 Swivel Gp -Hydraulic, Electric
| 09***98 | Seal-O-Ring (Id=29.40mm) | 1 |
| 16***63 | Retainer | 1 |
| 16***64 | Locknut; (M33x1.5-Thd) | 1 |
227-0566 Tank & Filter Gp-Hydraulic
| 09***79 | Seal-O-Ring (Id=10.80mm) | 1 |
| 09***84 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***87 | Seal-O-Ring (Id=20.80mm) | 1 |
227-0565 Tank & Mtg Gp-Hydraulic
| 09***78 | Seal-O-Ring (Id=9.80mm) | 1 |
| 10***52 | Ring | 2 |
| 10***53 | Ring | 2 |
289-5564 Tank Gp-Hydraulic
| 28***64 | Tank Group-Hydraulic | 1 |
277-8150 Valve & Mtg Gp-Control
| 27***50 | Valve & Mtg Group-Control | 1 |
255-5726 Valve Ar-Alt Pattern Control -2-Way
| 09***79 | Seal-O-Ring (Id=10.80mm) | 1 |
| 09***84 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***87 | Seal-O-Ring (Id=20.80mm) | 1 |
247-7451 Valve Ar-Swing -Fine Swing
| 11***85 | Plug | 4 |
| 24***51 | Valve Ar-Swing; -Fine Swing | 1 |
| 2D***42 | Ball 6.35 mm(.25 In.)Diameter | 4 |
215-4890 Valve Gp-Check
| 12***11 | Tee-Orfs | 1 |
| 12***52 | Connector | 2 |
| 21***90 | Valve Group-Check; -1-Way, 2-Way, Check | 1 |
173-4672 Valve Gp-Check -Oil Cooler Bypass
| 12***52 | Connector | 2 |
| 17***72 | Valve Group-Check; -Oil Cooler Bypass | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
297-0370 Valve Gp-Check
| 09***78 | Seal-O-Ring (Id=9.80mm) | 7 |
| 10***79 | Plug | 7 |
| 16***64 | Seat | 6 |
285-1343 Valve Gp-Control -Lh
| 08***38 | Seal-O-Ring | 1 |
| 10***17 | Spring | 1 |
| 10***18 | Ring; (Backup) | 1 |
270-6132 Valve Gp-Control -Without Covers, Housings
| 09***75 | Seal - O-Ring (7.80 mm Id) | 1 |
| 09***01 | Seal-O-Ring (Id=34.70mm) | 1 |
| 09***02 | Seal-O-Ring | 1 |
259-7378 Valve Gp-Control -Auxiliary
| 11***16 | Valve Group-Solenoid; -Grapple Signal-Ground Saw, Grapple Control | 4 |
| 25***78 | Valve Group-Control; -Auxiliary | 1 |
| 8T***88 | Screw (Required Only When Bosch Alternator Is Fitted) | 8 |
232-4103 Valve Gp-Control -Medium Pressure
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
285-1531 Valve Gp-Control -Medium Pressure
| 09***76 | Seal-O-Ring | 1 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***98 | Seal-O-Ring (Id=29.40mm) | 2 |
244-8400 Valve Gp-Control -Without Covers, Housings
| 09***19 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***78 | Seal-O-Ring (Id=9.80mm) | 1 |
| 09***22 | Bolt-Socket Head; (M5x0.8x10-mm) | 2 |
152-0924 Valve Gp-Control
| 15***24 | Valve Group-Control | 1 |
| 25***33 | Connector | 3 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 3 |
255-5652 Valve Gp-Control -Rh
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
| 11***16 | Valve Group-Solenoid; -Grapple Signal-Ground Saw, Grapple Control | 1 |
| 17***98 | Valve Group-Shuttle | 2 |
308-5558 Valve Gp-Control -Auxiliary
| 15***85 | Valve Group-Swing Cushion; (Fine Swing) | 1 |
| 30***58 | Valve Group-Control; -Auxiliary | 1 |
308-5557 Valve Gp-Control -Without Covers, Housings
| 09***76 | Seal-O-Ring | 1 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***98 | Seal-O-Ring (Id=29.40mm) | 2 |
285-1344 Valve Gp-Control -Without Covers, Housings
| 28***44 | Valve Group-Control; -Without Covers, Housings | 1 |
| 32***59 | Valve Group-Solenoid & Relief | 1 |
239-8825 Valve Gp-Control -Without Covers, Housings
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 12***14 | Seal-O-Ring (Id=10.82mm) | 1 |
| 12***15 | Seal-O-Ring (Id=12.42mm) | 1 |
239-8826 Valve Gp-Control -Without Covers, Housings
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
259-7432 Valve Gp-Control -Lh
| 11***16 | Valve Group-Solenoid; -Grapple Signal-Ground Saw, Grapple Control | 2 |
| 25***32 | Valve Group-Control; -Heavy Lift-Lh | 1 |
| 8T***88 | Screw (Required Only When Bosch Alternator Is Fitted) | 4 |
285-1361 Valve Gp-Control -Rh
| 08***38 | Seal-O-Ring | 1 |
| 10***41 | Ring; (Retaining) | 1 |
| 10***17 | Spring | 1 |
255-5653 Valve Gp-Control
| 09***19 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***78 | Seal-O-Ring (Id=9.80mm) | 1 |
| 09***22 | Bolt-Socket Head; (M5x0.8x10-mm) | 2 |
201-9236 Valve Gp-Flow Control -Boom Float, Pilot Oil
| 09***76 | Seal-O-Ring | 1 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***98 | Seal-O-Ring (Id=29.40mm) | 2 |
225-4785 Valve Gp-Load Control -Boom Cylinder
| 09***45 | Washer; (28.5x37x2-mm Thk) | 2 |
| 20***55 | Valve Group-Relief; -Crossover | 2 |
| 20***56 | Cover | 2 |
308-6964 Valve Gp-Load Control -Boom Cylinder
| 08***55 | Spacer; (93x130x8-mm Thk) | 2 |
| 09***49 | Washer; (22x60x6-mm Thk) | 1 |
| 09***63 | Spacer; (83x120x12-mm Thk) | 1 |
225-4843 Valve Gp-Load Control -Stick Cylinder
| 18***43 | Lines Group-Grease; -1-Piece Short Boom | 1 |
| 22***69 | Cylinder & Lines Group-Boom; -Lh | 1 |
| 22***70 | Cylinder & Lines Group-Boom; -Rh | 1 |
255-5680 Valve Gp-Load Control -Stick Drift Red, Line Relief
| 08***55 | Spacer; (93x130x8-mm Thk) | 2 |
| 09***49 | Washer; (22x60x6-mm Thk) | 1 |
| 09***63 | Spacer; (83x120x12-mm Thk) | 1 |
255-5683 Valve Gp-Load Control -Boom Drift Red, Line Relief
| 08***55 | Spacer; (93x130x8-mm Thk) | 2 |
| 09***90 | Shim (1.0 mm Thick) | 1 |
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
255-5651 Valve Gp-Main Control
| 03***48 | Clip; (11.11mm .437in Id) | 4 |
| 12***60 | Hose As | 1 |
| 12***62 | Hose As | 1 |
285-1341 Valve Gp-Main Control -Heavy Lift
| 09***49 | Washer; (22x60x6-mm Thk) | 1 |
| 09***45 | Seal-O-Ring | 2 |
| 09***49 | Seal-O-Ring (Id=175.00mm) | 2 |
277-8258 Valve Gp-Main Control -Heavy Lift
| 23***15 | Linkage Group-Bucket; -Db-Family, With Lifting Eye | 1 |
| 27***58 | Valve Group-Main Control; -Heavy Lift | 1 |
| 28***10 | Cylinder & Lines Group-Bucket; -Db-Family | 1 |
259-7424 Valve Gp-Main Control -Heavy Lift
| 25***97 | Linkage Group-Bucket; -Cb2-Family | 1 |
| 25***24 | Valve Group-Main Control; -Increased Lift | 1 |
| 28***02 | Cylinder & Lines Group-Bucket; -Cb2-Family | 1 |
331-4922 Valve Gp-Main Control
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
| 09***45 | Seal-O-Ring | 4 |
| 16***87 | Shim; (2-mm Thk) | 2 |
270-5947 Valve Gp-Pilot -Travel
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 2 |
| 11***36 | Clip | 3 |
| 22***81 | Air Conditioner Group | 1 |
225-4813 Valve Gp-Pilot -Joystick, Rh
| 09***49 | Washer; (22x60x6-mm Thk) | 2 |
| 09***63 | Spacer; (83x120x12-mm Thk) | 1 |
| 11***82 | Spacer; (73x105x14-mm Thk) | 1 |
297-0531 Valve Gp-Pilot -Joystick, Lh
| 22***80 | Air Conditioner & Mounting Group | 1 |
| 22***82 | Duct Group-Cab Air | 1 |
| 29***31 | Valve Group-Pilot; -Joystick, Lh | 1 |
310-0414 Valve Gp-Pilot -Travel
| 18***00 | Screw-Tapping | 35 |
| 18***02 | Screw As; (Tapping) | 3 |
| 24***12 | Housing Group-Air Conditioner; -Inlet Air | 1 |
297-0530 Valve Gp-Pilot -Joystick, Rh
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 2 |
| 11***36 | Clip | 3 |
| 23***73 | Harness As-Heater & Air Cond; (Control Panel Switches) | 1 |
232-4100 Valve Gp-Pilot -Joystick, Lh
| 19***99 | Screw-Button Head; (M8x1.25x20-mm) | 2 |
| 23***00 | Valve Group-Pilot; -Joystick, Lh | 1 |
| 24***86 | Plate | 2 |
285-1765 Valve Gp-Pilot -Alt Pattern Control, 2-Way
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 2 |
| 11***36 | Clip | 3 |
| 23***73 | Harness As-Heater & Air Cond; (Control Panel Switches) | 1 |
206-3305 Valve Gp-Pilot -Joystick
| 19***36 | Lines Group-Stick | 1 |
| 20***05 | Valve Group-Pilot; -Joystick | 1 |
| 29***69 | Stick Group-Hoe; -Reach | 1 |
297-0589 Valve Gp-Pilot -Joystick
| 18***00 | Screw-Tapping | 35 |
| 18***02 | Screw As; (Tapping) | 3 |
| 24***12 | Housing Group-Air Conditioner; -Inlet Air | 1 |
215-4909 Valve Gp-Pilot Relief -Hydraulic Filter
| 18***00 | Screw-Tapping | 35 |
| 18***02 | Screw As; (Tapping) | 3 |
| 21***09 | Valve Group-Pilot Relief; -Hydraulic Filter | 1 |
310-0210 Valve Gp-Pressure Reducing -Boom, Swing Priority
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 18***86 | Screw-Machine; (M4x0.7x8-mm) | 2 |
| 23***51 | Support As | 1 |
232-4102 Valve Gp-Pressure Reducing -Stick
| 09***10 | Clamp | 4 |
| 14***97 | Screw-Pan Head; (M4x0.7x12-mm) | 3 |
| 16***87 | Washer-Hard; (5.2x16x1.5-mm Thk) | 3 |
153-5295 Valve Gp-Priority -Swing
| 15***95 | Valve Group-Priority; (Negative Flow) | 1 |
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 18***86 | Screw-Machine; (M4x0.7x8-mm) | 2 |
323-7898 Valve Gp-Priority -Swing
| 2U***52 | Lockwasher From 5wd169 - Up And Field Installed | 5 |
| 32***98 | Valve Group-Priority; -Swing | 1 |
| 6V***83 | Bolt (16mm Long); (M6x1x16-mm) | 3 |
244-8450 Valve Gp-Relief
| 09***23 | Screw-Machine; (M6x1x6-mm) | 1 |
| 11***27 | Screw-Machine; (M6x1x30-mm) | 2 |
| 11***53 | Screw-Special | 1 |
255-5661 Valve Gp-Relief -Line
| 09***23 | Screw-Machine; (M6x1x6-mm) | 1 |
| 11***27 | Screw-Machine; (M6x1x30-mm) | 2 |
| 11***53 | Screw-Special | 1 |
239-8774 Valve Gp-Relief -Main, Heavy Lift
| 08***52 | Washer | 2 |
| 09***23 | Screw-Machine; (M6x1x6-mm) | 3 |
| 10***69 | Bolt As; (M8x1.25x16-mm) | 2 |
204-2755 Valve Gp-Relief
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 13 |
| 12***36 | Screw; (Truss Head) (M6x1.0x16mm) | 1 |
| 15***56 | Rail | 1 |
310-0393 Valve Gp-Relief
| 10***08 | Bumper; (Conical) | 2 |
| 11***27 | Screw-Machine; (M6x1x30-mm) | 2 |
| 11***53 | Screw-Special | 1 |
118-5410 Valve Gp-Relief
| 11***10 | Valve Group-Relief; -Line, Boom Cylinder Head End | 1 |
| 23***33 | Wiper Group-Window; -Front Window, 1-Piece | 1 |
| 28***34 | Washer Group-Window | 1 |
116-3600 Valve Gp-Relief -Line
| 11***00 | Valve Group-Relief; -Line-Grapple | 1 |
| 23***33 | Wiper Group-Window; -Front Window, 1-Piece | 1 |
| 28***34 | Washer Group-Window | 1 |
255-5660 Valve Gp-Relief
| 09***23 | Screw-Machine; (M6x1x6-mm) | 1 |
| 11***27 | Screw-Machine; (M6x1x30-mm) | 2 |
| 11***53 | Screw-Special | 1 |
109-2667 Valve Gp-Relief -Negative Flow Control
| 10***67 | Valve Group-Relief; -Negative Flow Control | 1 |
| 28***75 | Lever | 1 |
| 28***27 | Cover | 1 |
184-3830 Valve Gp-Relief
| 13***99 | Hatch Group; (Roof) | 1 |
| 13***00 | Door Group-Cab | 1 |
| 13***01 | Window Group-Cab; -Front, Upper | 1 |
259-7600 Valve Gp-Relief -Medium Pressure
| 09***72 | Screw-Machine; (M4x0.7x16-mm) | 12 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 8 |
| 10***80 | Bolt-Socket Head; (M6x1x45-mm) | 2 |
259-7601 Valve Gp-Relief -Medium Pressure
| 10***08 | Bumper; (Conical) | 2 |
| 11***27 | Screw-Machine; (M6x1x30-mm) | 2 |
| 11***53 | Screw-Special | 1 |
255-5662 Valve Gp-Relief -Line
| 18***21 | Screen Group-Sun | 1 |
| 18***68 | Door & Mtg Group-Cab | 1 |
| 22***13 | Monitor & Mtg Group-Operator | 1 |
352-6816 Valve Gp-Relief
| 22***13 | Monitor & Mtg Group-Operator | 1 |
| 24***64 | Trim Group-Cab; -Interior, Front | 1 |
| 25***49 | Guard Group-Overhead; -Demolition | 1 |
153-5313 Valve Gp-Relief
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 5 |
| 15***13 | Valve Group-Relief; -Negative Flow Control | 1 |
| 16***74 | Louver As-Vent | 2 |
352-7123 Valve Gp-Relief -Line
| 22***13 | Monitor & Mtg Group-Operator | 1 |
| 24***64 | Trim Group-Cab; -Interior, Front | 1 |
| 25***49 | Guard Group-Overhead; -Demolition | 1 |
109-5152 Valve Gp-Relief
| 10***52 | Valve Group-Relief; -Negative Flow Control | 1 |
| 23***33 | Wiper Group-Window; -Front Window, 1-Piece | 1 |
| 28***36 | Cab Group; -Demolition | 1 |
123-2549 Valve Gp-Shuttle
| 12***49 | Valve Group-Shuttle | 1 |
| 22***13 | Monitor & Mtg Group-Operator | 1 |
| 24***64 | Trim Group-Cab; -Interior, Front | 1 |
164-6979 Valve Gp-Shuttle
| 16***79 | Valve Group-Shuttle | 1 |
| 32***70 | Camera & Wiring Group | 1 |
| 33***53 | Mirror Rear Axle View | 1 |
259-7732 Valve Gp-Shuttle
| 13***89 | Clip; (Ladder) | 1 |
| 25***92 | Bolt; (M8x1.25x80-mm) | 2 |
| 25***32 | Valve Group-Shuttle; -Swing | 1 |
112-0083 Valve Gp-Shuttle
| 11***83 | Valve Group-Shuttle; -Third Pedal, Straight Travel | 1 |
| 18***21 | Screen Group-Sun | 1 |
| 18***68 | Door & Mtg Group-Cab | 1 |
164-6980 Valve Gp-Shuttle
| 12***36 | Seal-O-Ring (Id=13.4mm); (Id=13.40mm) | 1 |
| 12***38 | Seal-O-Ring (Id=6.7mm); (Id=6.70mm) | 1 |
| 16***80 | Valve Group-Shuttle | 1 |
185-0462 Valve Gp-Shuttle
| 13***89 | Clip; (Ladder) | 1 |
| 18***62 | Valve Group-Shuttle; -Pilot | 1 |
| 25***92 | Bolt; (M8x1.25x80-mm) | 2 |
123-2430 Valve Gp-Shuttle
| 12***30 | Valve Group-Shuttle; (Work Tool) | 1 |
| 18***21 | Screen Group-Sun | 1 |
| 18***93 | Door Group-Cab | 1 |
259-7429 Valve Gp-Solenoid
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 4 |
| 18***84 | Cover | 1 |
| 23***79 | Nut-Speed | 2 |
185-0472 Valve Gp-Solenoid
| 12***17 | Guard | 2 |
| 17***16 | Grommet | 2 |
| 17***22 | Grommet | 2 |
315-4412 Valve Gp-Solenoid
| 24***10 | Film Group; -Operator Controls, Notice | 1 |
| 25***95 | Fastener Group-Wiring Harness; -Joystick | 1 |
| 27***89 | Control & Mtg Group-Joystick; -2-Button, Slide, Trigger Sw | 1 |
297-0371 Valve Gp-Solenoid
| 25***62 | Control Group-Joystick; -Rh | 1 |
| 25***63 | Control Group-Joystick; -Lh | 1 |
| 29***71 | Valve Group-Solenoid; -Boom Float | 1 |
121-6303 Valve Gp-Solenoid
| 12***03 | Valve Group-Solenoid; -Variable Adjustable Boom | 1 |
| 12***17 | Guard | 2 |
| 17***16 | Grommet | 2 |
121-1491 Valve Gp-Solenoid
| 12***91 | Valve Group-Solenoid; -Hydraulic Activation Control | 1 |
| 16***32 | Motor As; (Hydraulic Fan) | 1 |
| 16***34 | Resistor As; (Hydraulic Fan) | 1 |
116-3526 Valve Gp-Solenoid -Fine Swing
| 11***26 | Valve Group-Solenoid; -Swing Cushion | 1 |
| 16***32 | Motor As; (Hydraulic Fan) | 1 |
| 16***34 | Resistor As; (Hydraulic Fan) | 1 |
171-0188 Valve Gp-Solenoid
| 10***66 | Spacer; (6.6x11x6-mm Thk) | 8 |
| 12***17 | Guard | 2 |
| 17***88 | Valve Group-Solenoid; -Neg Flow Cont, Propn Red Valve | 1 |
259-7430 Valve Gp-Solenoid -Pressure Reducing
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 5 |
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 23***79 | Nut-Speed | 6 |
111-9916 Valve Gp-Solenoid
| 11***16 | Valve Group-Solenoid; -Grapple Signal-Ground Saw, Grapple Control | 1 |
| 27***15 | Condenser Group-Refrigerant | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
323-7558 Valve Gp-Solenoid & Relief -With Block
| 29***38 | Control Group-Pilot Operated Hydraulic; -Rh | 1 |
| 29***39 | Control Group-Pilot Operated Hydraulic; -Lh | 1 |
| 32***58 | Valve Group-Solenoid & Relief; -With Block | 1 |
323-7559 Valve Gp-Solenoid & Relief
| 27***66 | Control Group-Joystick; -Rh | 1 |
| 27***67 | Control Group-Joystick; -Lh | 1 |
| 32***59 | Valve Group-Solenoid & Relief | 1 |
244-8506 Valve Gp-Solenoid & Relief
| 24***06 | Valve Group-Solenoid & Relief; -Line Relief, Work Tool | 1 |
| 24***11 | Film Group; -Operator Controls, Notice | 1 |
| 25***95 | Fastener Group-Wiring Harness; -Joystick | 1 |
244-8507 Valve Gp-Solenoid & Relief
| 24***07 | Valve Group-Solenoid & Relief; -1-Way, 2-Way Flow | 1 |
| 25***05 | Control Group-Joystick; -Rh | 1 |
| 25***06 | Control Group-Joystick; -Lh | 1 |
259-0680 Valve Gp-Swing Cushion -Fine Swing
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 2 |
| 12***65 | Pedal-Rubber; (Lh) | 1 |
| 12***73 | Pin | 1 |
158-9090 Valve Gp-Swing Cushion -Fine Swing
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 2 |
| 12***65 | Pedal-Rubber; (Lh) | 1 |
| 12***73 | Pin | 1 |
158-9085 Valve Gp-Swing Cushion
| 15***85 | Valve Group-Swing Cushion; (Fine Swing) | 1 |
| 29***40 | Control Group-Pilot Operated Hydraulic; -Rh | 1 |
| 29***41 | Control Group-Pilot Operated Hydraulic; -Lh | 1 |
322-8716 Valve Gp-Swing Cushion -Fine Swing
| 09***69 | Grommet | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 20***40 | Harness As-Operator Controls | 1 |
204-2819 Valve Gp-Travel Counterbalance
| 11***83 | Pin-Spring | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 6 |
| 20***19 | Valve Group-Travel Counterbalance | 1 |
Implements
290-1805 Boom Ar-1 Piece Long
| 11***83 | Pin-Spring | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 6 |
| 22***17 | Handle Group-Joystick; (Lh) | 1 |
229-1756 Boom Ar-1 Piece Short
| 11***83 | Pin-Spring | 1 |
| 22***56 | Boom Ar-1 Piece Short | 1 |
| 26***11 | Lever | 1 |
290-1806 Boom Ar-1 Piece Short
| 11***83 | Pin-Spring | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 4 |
| 24***93 | Receptacle As-Connector; (6-Pin) | 1 |
290-9260 Boom Gp
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 6 |
| 24***93 | Receptacle As-Connector; (6-Pin) | 1 |
| 29***60 | Boom Group | 1 |
290-9266 Boom Gp
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 2 |
| 12***73 | Pin | 1 |
| 13***74 | Pedal-Rubber | 1 |
235-7614 Boom Gp-1 Piece
| 11***83 | Pin-Spring | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 4 |
| 23***14 | Boom Group-1 Piece | 1 |
184-5543 Lines Gp-Grease -1-Piece Short Boom
| 18***43 | Lines Group-Grease; -1-Piece Short Boom | 1 |
| 22***13 | Valve Group-Pilot; -Joystick, Rh | 1 |
| 26***09 | Control Group-Handle; -Joystick, Rh | 1 |
180-7816 Lines Gp-Grease -1-Piece Long Boom
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 2 |
| 12***65 | Pedal-Rubber; (Lh) | 1 |
| 12***73 | Pin | 1 |
290-1813 Linkage Ar-Bucket -Cb2-Family, With Lifting Eye
| 23***00 | Valve Group-Pilot; -Joystick, Lh | 1 |
| 26***10 | Control Group-Handle; -Joystick, Lh | 1 |
| 29***13 | Linkage Ar-Bucket; -Cb2-Family, With Lifting Eye | 1 |
290-1825 Linkage Ar-Bucket -Db-Family, With Lifting Eye
| 20***05 | Valve Group-Pilot; -Joystick | 1 |
| 26***09 | Control Group-Handle; -Joystick, Rh | 1 |
| 29***25 | Linkage Ar-Bucket; -Db-Family, With Lifting Eye | 1 |
251-2597 Linkage Gp-Bucket -Cb2-Family
| 22***13 | Valve Group-Pilot; -Joystick, Rh | 1 |
| 25***97 | Linkage Group-Bucket; -Cb2-Family | 1 |
| 26***27 | Control Group-Handle; -Joystick, Rh | 1 |
236-8415 Linkage Gp-Bucket -Db-Family, With Lifting Eye
| 20***05 | Valve Group-Pilot; -Joystick | 1 |
| 23***15 | Linkage Group-Bucket; -Db-Family, With Lifting Eye | 1 |
| 26***10 | Control Group-Handle; -Joystick, Lh | 1 |
290-1807 Stick Ar-Hoe -Reach
| 23***00 | Valve Group-Pilot; -Joystick, Lh | 1 |
| 26***28 | Control Group-Handle; -Joystick, Lh | 1 |
| 29***07 | Stick Ar-Hoe; -Reach | 1 |
290-9269 Stick Gp-Hoe -Reach
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 5 |
| 24***93 | Receptacle As-Connector; (6-Pin) | 1 |
| 24***12 | Boot | 1 |
Lubrication System
191-0523 Adapter Gp-Oil Line -Fuel Injection Pump-Unit Injector Hyd Pump
| 14***95 | Plug As | 2 |
| 16***19 | Plug As | 1 |
| 19***23 | Adapter Group-Oil Line; -Fuel Injection Pump-Unit Injector Hydraulic Pump | 1 |
222-5946 Breather Gp
| 11***37 | Pulley; (8-Groove) | 1 |
| 11***25 | Filter; (Water)(Pump) | 1 |
| 12***70 | Shaft Assem. | 1 |
233-1123 Mounting Gp-Lines -Engine Oil Filter
| 09***32 | Valve As-Drain | 1 |
| 09***43 | Seal-O-Ring | 4 |
| 09***35 | Clamp | 2 |
231-7266 Filter Gp-Engine Oil
| 09***35 | Clamp | 1 |
| 09***07 | Band, Tank | 1 |
| 17***69 | Cap As; (Coolant Recovery) | 1 |
254-7342 Fumes Disposal Gp
| 09***35 | Clamp | 1 |
| 09***07 | Band, Tank | 1 |
| 17***69 | Cap As; (Coolant Recovery) | 1 |
177-4814 Gauge Gp-Oil Level (Dipstick) -Engine
| 09***35 | Clamp | 1 |
| 09***07 | Band, Tank | 1 |
| 17***69 | Cap As; (Coolant Recovery) | 1 |
7c-2475 Lines Gp-Engine Oil
| 09***35 | Clamp | 1 |
| 09***07 | Band, Tank | 1 |
| 17***69 | Cap As; (Coolant Recovery) | 1 |
171-9114 Lines Gp-Engine Oil Drain
| 09***35 | Clamp | 1 |
| 09***07 | Band, Tank | 1 |
| 17***69 | Cap As; (Coolant Recovery) | 1 |
280-4371 Lines Gp-Turbocharger Oil
| 09***32 | Valve As-Drain | 1 |
| 09***43 | Seal-O-Ring | 4 |
| 09***35 | Clamp | 2 |
200-4497 Pump Gp-Engine Oil
| 09***32 | Valve As-Drain | 1 |
| 09***43 | Seal-O-Ring | 4 |
| 09***35 | Clamp | 2 |
192-2981 Pump Gp-Engine Oil
| 09***32 | Valve As-Drain | 1 |
| 09***43 | Seal-O-Ring | 4 |
| 09***35 | Clamp | 2 |
Machine Arrangement
294-5671 Chassis Ar
| 14***36 | Mirror Group-Rear View; -Front, Rh | 1 |
| 22***37 | Tank & Mtg Group-Fuel | 1 |
| 22***40 | Box & Mtg Group-Storage | 1 |
292-2661 Chassis Ar
| 14***36 | Mirror Group-Rear View; -Front, Rh | 1 |
| 22***37 | Tank & Mtg Group-Fuel | 1 |
| 22***40 | Box & Mtg Group-Storage | 1 |
277-8251 Chassis Ar
| 14***36 | Mirror Group-Rear View; -Front, Rh | 1 |
| 22***37 | Tank & Mtg Group-Fuel | 1 |
| 22***40 | Box & Mtg Group-Storage | 1 |
264-0680 Conversion Ar-Machine
| 13***83 | Guard Group-Swivel | 1 |
| 18***13 | Guard Group-Travel Motor; -Heavy-Duty | 1 |
| 19***56 | Roller Ar-Track & Carrier | 1 |
286-0151 Conversion Ar-Machine
| 13***83 | Guard Group-Swivel | 1 |
| 18***13 | Guard Group-Travel Motor; -Heavy-Duty | 1 |
| 19***56 | Roller Ar-Track & Carrier | 1 |
357-5497 Conversion Ar-Machine
| 22***79 | Air Conditioner Ar | 1 |
| 24***37 | Seat Belt Group; -Retractable, 46-mm | 1 |
| 24***07 | Parts Ar-Cab; -Handrail, Floodlight | 1 |
277-8261 Conversion Ar-Upper (Oem)
| 19***87 | Drive Group-Swing; -With Motor | 1 |
| 21***81 | Fastener Group-Swing & Final Dr | 1 |
| 22***61 | Electronics Group-Monitor | 1 |
277-8250 General Ar
| 22***84 | Pump Ar-Fuel Transfer | 1 |
| 23***71 | Alarm Group-Travel; -Backup | 1 |
| 24***61 | Seat & Mounting Group; -Air Susp, High Back, Tilt | 1 |
340-9943 Oem Ar-Mobile Hyd Power Unit -325d
| 18***62 | Valve Group-Shuttle; -Pilot | 1 |
| 19***37 | Drive Group-Auxiliary Pump; (Auxiliary Pump) | 1 |
| 22***71 | Cylinder & Seal Group-Boom | 2 |
346-5408 Oem Ar-Mobile Hyd Power Unit
| 09***26 | Lockwasher-Tooth; (M4 Id) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***07 | Switch Group-Rotary; -Autodig Material Select-Throttle Position | 1 |
293-4393 Oem Ar-Mobile Hyd Power Unit -325d L Upper Frame, 147-Kw
| 22***84 | Pump Ar-Fuel Transfer | 1 |
| 24***61 | Seat & Mounting Group; -Air Susp, High Back, Tilt | 1 |
| 24***51 | Valve Ar-Swing; -Fine Swing | 1 |
306-3008 Oem Ar-Mobile Hyd Power Unit -325d Upper Frame, 161-Kw
| 24***02 | Frame Ar-Undercarriage; -320d, Adj Gauge, H-Carbody | 1 |
| 30***08 | Oem Ar-Mobile Hydraulic Power Unit; -325d Upper Frame, 161-Kw | 1 |
| 33***51 | Oem Ar-Mobile Hydraulic Power Unit; -325d Upper Frame, 187-Kw | 1 |
338-7341 Oem Ar-Mobile Hyd Power Unit -325d Upper Frame, 187-Kw
| 25***61 | Valve Group-Relief; -Line | 1 |
| 33***41 | Oem Ar-Mobile Hydraulic Power Unit; -325d Upper Frame, 187-Kw | 1 |
323-6983 Oem Ar-Mobile Hyd Power Unit -325d Upper Frame
| 22***84 | Pump Ar-Fuel Transfer | 1 |
| 23***71 | Alarm Group-Travel; -Backup | 1 |
| 24***61 | Seat & Mounting Group; -Air Susp, High Back, Tilt | 1 |
331-4751 Oem Ar-Mobile Hyd Power Unit -325d Upper Frame, 187-Kw
| 33***51 | Oem Ar-Mobile Hydraulic Power Unit; -325d Upper Frame, 187-Kw | 1 |
| 33***37 | Frame Ar-Undercarriage | 1 |
| 33***41 | Oem Ar-Mobile Hydraulic Power Unit; -325d Upper Frame, 187-Kw | 1 |
289-9914 Oem Ar-Mobile Hyd Power Unit -320d Lower, 325d Upper Frame
| 22***84 | Pump Ar-Fuel Transfer | 1 |
| 23***71 | Alarm Group-Travel; -Backup | 1 |
| 24***61 | Seat & Mounting Group; -Air Susp, High Back, Tilt | 1 |
287-2556 Oem Ar-Mobile Hyd Power Unit -325d Upper Frame, 187-Kw
| 22***84 | Pump Ar-Fuel Transfer | 1 |
| 23***71 | Alarm Group-Travel; -Backup | 1 |
| 24***61 | Seat & Mounting Group; -Air Susp, High Back, Tilt | 1 |
289-9909 Oem Ar-Mobile Hyd Power Unit -320d Lower, 325d Upper Frame
| 24***02 | Frame Ar-Undercarriage; -320d, Adj Gauge, H-Carbody | 1 |
| 28***59 | Oem Ar-Mobile Hydraulic Power Unit; -325d Upper Frame, 187-Kw | 1 |
| 28***09 | Oem Ar-Mobile Hydraulic Power Unit; -320d Lower, 325d Upper Frame | 1 |
293-6366 Oem Ar-Mobile Hyd Power Unit -325d Upper Frame, 187-Kw
| 23***09 | Frame Ar-Undercarriage | 1 |
| 29***66 | Oem Ar-Mobile Hydraulic Power Unit; -325d Upper Frame, 187-Kw | 1 |
| 29***69 | Special Ar-Oem | 1 |
289-9913 Oem Ar-Mobile Hyd Power Unit -320d Lower, 325d Upper Frame
| 22***84 | Pump Ar-Fuel Transfer | 1 |
| 22***64 | Track Ar; -2-Required | 2 |
| 23***71 | Alarm Group-Travel; -Backup | 1 |
331-1843 Oem Ar-Mobile Hyd Power Unit -320d Lower, 325d Upper Frame
| 22***84 | Pump Ar-Fuel Transfer | 1 |
| 23***68 | Installation Group-Radio | 1 |
| 23***00 | Cover Group-Storage; -Cab, Rear | 1 |
294-5668 Oem Ar-Mobile Hyd Power Unit
| 22***49 | Guard Group-Bottom; -Heavy-Duty | 1 |
| 22***77 | Guard Ar-Vandalism | 1 |
| 22***86 | Cooling Ar-High Ambient Temp | 1 |
357-5520 Oem Ar-Mobile Hyd Power Unit -325d Upper Frame, 187-Kw
| 25***79 | Control Group-Hydraulic Pedal; -Third Pedal, Straight Travel | 1 |
| 35***20 | Oem Ar-Mobile Hydraulic Power Unit; -325d Upper Frame, 187-Kw | 1 |
277-8260 Oem Ar-Mobile Hyd Power Unit -325d Upper Frame
| 22***84 | Pump Ar-Fuel Transfer | 1 |
| 23***71 | Alarm Group-Travel; -Backup | 1 |
| 24***61 | Seat & Mounting Group; -Air Susp, High Back, Tilt | 1 |
289-9912 Oem Ar-Mobile Hyd Power Unit
| 22***84 | Pump Ar-Fuel Transfer | 1 |
| 23***71 | Alarm Group-Travel; -Backup | 1 |
| 24***61 | Seat & Mounting Group; -Air Susp, High Back, Tilt | 1 |
282-2344 Oem Ar-Mobile Hyd Power Unit -325d Upper Frame, 161-Kw
| 22***84 | Pump Ar-Fuel Transfer | 1 |
| 23***71 | Alarm Group-Travel; -Backup | 1 |
| 24***61 | Seat & Mounting Group; -Air Susp, High Back, Tilt | 1 |
326-1243 Oem Ar-Mobile Hyd Power Unit -325d Upper Frame, 187-Kw
| 22***77 | Guard Ar-Vandalism | 1 |
| 22***64 | Track Ar; -2-Required | 2 |
| 23***71 | Alarm Group-Travel; -Backup | 1 |
282-2559 Oem Ar-Mobile Hyd Power Unit -325d Upper Frame, 187-Kw
| 22***84 | Pump Ar-Fuel Transfer | 1 |
| 23***71 | Alarm Group-Travel; -Backup | 1 |
| 24***61 | Seat & Mounting Group; -Air Susp, High Back, Tilt | 1 |
289-9911 Oem Ar-Mobile Hyd Power Unit
| 23***25 | Frame Ar-Undercarriage; -320d, Adj Gauge, H-Carbody | 1 |
| 28***58 | Oem Ar-Mobile Hydraulic Power Unit; -325d Upper Frame, 187-Kw | 1 |
| 28***11 | Oem Ar-Mobile Hydraulic Power Unit | 1 |
294-5263 Oem Ar-Mobile Hyd Power Unit -325d L Upper Frame, 147-Kw
| 23***14 | Swivel Group; -Hydraulic, Electric | 1 |
| 28***62 | Oem Ar-Mobile Hydraulic Power Unit; -325d Upper Frame, 161-Kw | 1 |
| 29***63 | Oem Ar-Mobile Hydraulic Power Unit; -325d L Upper Frame, 147-Kw | 1 |
345-4473 Oem Ar-Mobile Hyd Power Unit
| 25***62 | Valve Group-Relief; -Line | 2 |
| 26***07 | Counterweight & Mounting Group | 1 |
| 34***73 | Oem Ar-Mobile Hydraulic Power Unit | 1 |
294-5262 Oem Ar-Mobile Hyd Power Unit
| 24***02 | Frame Ar-Undercarriage; -320d, Adj Gauge, H-Carbody | 1 |
| 29***66 | Oem Ar-Mobile Hydraulic Power Unit; -325d Upper Frame, 187-Kw | 1 |
| 29***62 | Oem Ar-Mobile Hydraulic Power Unit | 1 |
335-4220 Oem Ar-Mobile Hyd Power Unit -329d
| 25***79 | Control Group-Hydraulic Pedal; -Third Pedal, Straight Travel | 1 |
| 33***20 | Oem Ar-Mobile Hydraulic Power Unit; -329d | 1 |
357-4938 Oem Ar-Mobile Hyd Power Unit
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
347-5432 Oem Ar-Mobile Hyd Power Unit
| 08***44 | Hose | 11 |
| 09***45 | Washer; (16.6x24x1.2-mm Thk) | 1 |
| 09***26 | Lockwasher-Tooth; (M4 Id) | 2 |
278-9524 Oem Ar-Mobile Hyd Power Unit -325d Upper Frame, 161-Kw
| 22***84 | Pump Ar-Fuel Transfer | 1 |
| 23***71 | Alarm Group-Travel; -Backup | 1 |
| 24***61 | Seat & Mounting Group; -Air Susp, High Back, Tilt | 1 |
282-2558 Oem Ar-Mobile Hyd Power Unit -325d Upper Frame, 187-Kw
| 22***84 | Pump Ar-Fuel Transfer | 1 |
| 23***71 | Alarm Group-Travel; -Backup | 1 |
| 24***61 | Seat & Mounting Group; -Air Susp, High Back, Tilt | 1 |
297-6385 Oem Ar-Mobile Hyd Power Unit
| 22***84 | Pump Ar-Fuel Transfer | 1 |
| 23***71 | Alarm Group-Travel; -Backup | 1 |
| 24***61 | Seat & Mounting Group; -Air Susp, High Back, Tilt | 1 |
285-5322 Oem Ar-Mobile Hyd Power Unit -325d Upper Frame, 161-Kw
| 28***22 | Oem Ar-Mobile Hydraulic Power Unit; -325d Upper Frame, 161-Kw | 1 |
| 28***58 | Special Ar-Oem; -325d | 1 |
| 28***60 | Parts Ar-Miscellaneous | 1 |
292-9123 Oem Ar-Mobile Hyd Power Unit -325d Upper Frame, 147-Kw
| 23***25 | Frame Ar-Undercarriage; -320d, Adj Gauge, H-Carbody | 1 |
| 29***23 | Oem Ar-Mobile Hydraulic Power Unit; -325d Upper Frame, 147-Kw | 1 |
| 29***63 | Oem Ar-Mobile Hydraulic Power Unit; -325d L Upper Frame, 147-Kw | 1 |
282-2560 Oem Ar-Mobile Hyd Power Unit -325d Upper Frame, 187-Kw
| 22***84 | Pump Ar-Fuel Transfer | 1 |
| 23***71 | Alarm Group-Travel; -Backup | 1 |
| 24***61 | Seat & Mounting Group; -Air Susp, High Back, Tilt | 1 |
282-2346 Oem Ar-Mobile Hyd Power Unit -325d Upper Frame
| 22***84 | Pump Ar-Fuel Transfer | 1 |
| 23***71 | Alarm Group-Travel; -Backup | 1 |
| 24***61 | Seat & Mounting Group; -Air Susp, High Back, Tilt | 1 |
287-3113 Oem Ar-Mobile Hyd Power Unit -325d Upper Frame, 187-Kw
| 22***84 | Pump Ar-Fuel Transfer | 1 |
| 23***71 | Alarm Group-Travel; -Backup | 1 |
| 24***61 | Seat & Mounting Group; -Air Susp, High Back, Tilt | 1 |
357-4939 Oem Ar-Mobile Hyd Power Unit -325d Upper Frame, 187-Kw
| 23***92 | Support | 1 |
| 25***79 | Control Group-Hydraulic Pedal; -Third Pedal, Straight Travel | 1 |
| 25***95 | Bracket Group-Mirror | 1 |
281-8409 Oem Ar-Mobile Hyd Power Unit -325d L, 147-Kw
| 22***84 | Pump Ar-Fuel Transfer | 1 |
| 23***71 | Alarm Group-Travel; -Backup | 1 |
| 24***61 | Seat & Mounting Group; -Air Susp, High Back, Tilt | 1 |
289-9910 Oem Ar-Mobile Hyd Power Unit -320d Lower, 325d Upper Frame
| 23***25 | Frame Ar-Undercarriage; -320d, Adj Gauge, H-Carbody | 1 |
| 27***24 | Oem Ar-Mobile Hydraulic Power Unit; -325d Upper Frame, 161-Kw | 1 |
| 28***10 | Oem Ar-Mobile Hydraulic Power Unit; -320d Lower, 325d Upper Frame | 1 |
282-2555 Oem Ar-Mobile Hyd Power Unit -325d Upper Frame, 161-Kw
| 22***84 | Pump Ar-Fuel Transfer | 1 |
| 23***71 | Alarm Group-Travel; -Backup | 1 |
| 24***61 | Seat & Mounting Group; -Air Susp, High Back, Tilt | 1 |
287-3562 Oem Ar-Mobile Hyd Power Unit -325d Upper Frame, 161-Kw
| 24***02 | Frame Ar-Undercarriage; -320d, Adj Gauge, H-Carbody | 1 |
| 28***44 | Oem Ar-Mobile Hydraulic Power Unit; -325d Upper Frame, 161-Kw | 1 |
| 28***62 | Oem Ar-Mobile Hydraulic Power Unit; -325d Upper Frame, 161-Kw | 1 |
282-2348 Oem Ar-Mobile Hyd Power Unit -325d Upper Frame
| 22***84 | Pump Ar-Fuel Transfer | 1 |
| 23***71 | Alarm Group-Travel; -Backup | 1 |
| 24***61 | Seat & Mounting Group; -Air Susp, High Back, Tilt | 1 |
340-7745 Option Ar-Linkage
| 12***49 | Valve Group-Shuttle | 1 |
| 19***37 | Drive Group-Auxiliary Pump; (Auxiliary Pump) | 1 |
| 25***79 | Control Group-Hydraulic Pedal; -Third Pedal, Straight Travel | 1 |
282-6833 Parts Ar-Miscellaneous
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 16 |
| 11***29 | Bolt; (M24x3x100-mm) | 42 |
| 11***79 | Flange-Special | 2 |
282-2556 Parts Ar-Miscellaneous
| 23***92 | Support | 1 |
| 25***79 | Control Group-Hydraulic Pedal; -Third Pedal, Straight Travel | 1 |
| 25***95 | Bracket Group-Mirror | 1 |
345-7854 Parts Ar-Miscellaneous
| 11***75 | Starting Motor Group-Electric; (Cold Weather) | 1 |
| 11***70 | Fastener Group-Lifting; -Engine, Rear | 1 |
| 11***03 | Seal Group-Crankshaft | 1 |
282-2345 Parts Ar-Miscellaneous
| 23***69 | Drive Group-Accessory | 1 |
| 25***62 | Valve Group-Relief; -Line | 2 |
| 28***45 | Parts Ar-Miscellaneous | 1 |
294-5264 Parts Ar-Miscellaneous
| 21***76 | Drive Group-Fan | 1 |
| 25***51 | Muffler Group | 1 |
| 26***04 | Engine Ar-Complete | 1 |
287-2561 Parts Ar-Miscellaneous
| 23***15 | Pump & Mtg Group-Main Hydraulic | 1 |
| 27***20 | Engine Ar | 1 |
| 28***59 | Installation Ar-Engine | 1 |
326-1241 Parts Ar-Miscellaneous
| 26***50 | Electronics Group-Machine; -High Power | 1 |
| 26***47 | Engine Ar-Complete | 1 |
| 32***41 | Parts Ar-Miscellaneous | 1 |
287-2560 Parts Ar-Miscellaneous
| 19***87 | Drive Group-Swing; -With Motor | 1 |
| 22***61 | Electronics Group-Monitor | 1 |
| 22***75 | Electronics Group-Machine | 1 |
287-7819 Parts Ar-Miscellaneous
| 17***10 | Power Train Ar | 1 |
| 22***61 | Electronics Group-Monitor | 1 |
| 22***75 | Electronics Group-Machine | 1 |
347-5471 Parts Ar-Miscellaneous
| 11***75 | Starting Motor Group-Electric; (Cold Weather) | 1 |
| 11***70 | Fastener Group-Lifting; -Engine, Rear | 1 |
| 11***03 | Seal Group-Crankshaft | 1 |
331-4750 Parts Ar-Miscellaneous
| 21***76 | Drive Group-Fan | 1 |
| 25***25 | Engine Ar-Complete | 1 |
| 25***51 | Muffler Group | 1 |
333-0557 Parts Ar-Miscellaneous
| 25***25 | Engine Ar-Complete | 1 |
| 33***57 | Parts Ar-Miscellaneous | 1 |
338-7342 Parts Ar-Miscellaneous
| 11***75 | Starting Motor Group-Electric; (Cold Weather) | 1 |
| 11***70 | Fastener Group-Lifting; -Engine, Rear | 1 |
| 11***03 | Seal Group-Crankshaft | 1 |
293-6367 Parts Ar-Miscellaneous
| 16***72 | Lighting Group-Flood; -Cab | 1 |
| 19***37 | Drive Group-Auxiliary Pump; (Auxiliary Pump) | 1 |
| 22***54 | Fastener Group-Swing Drive | 1 |
285-5323 Parts Ar-Miscellaneous
| 22***07 | Gear & Bearing Group-Swing | 1 |
| 26***55 | Gear & Bearing Group-Swing | 1 |
| 28***23 | Parts Ar-Miscellaneous | 1 |
277-8259 Parts Ar-Upper (Oem)
| 11***43 | Cooler Group-Engine Oil | 1 |
| 17***38 | Turbocharger Group | 1 |
| 19***61 | Lines Group-Injector Hydraulic Pump | 1 |
292-9124 Parts Gp-Miscellaneous
| 11***43 | Cooler Group-Engine Oil | 1 |
| 17***38 | Turbocharger Group | 1 |
| 19***61 | Lines Group-Injector Hydraulic Pump | 1 |
346-5409 Shovel Gp-Front
| 11***43 | Cooler Group-Engine Oil | 1 |
| 19***61 | Lines Group-Injector Hydraulic Pump | 1 |
| 19***81 | Pump Group-Engine Oil | 1 |
294-5670 Special Ar
| 10***05 | Air Cleaner & Mounting Group | 1 |
| 17***14 | Lines Group-Engine Oil Drain | 1 |
| 21***75 | Lines Group-Cooling Air; -Turbocharger, Aftercooler | 1 |
247-7392 Special Ar-Heavy Lift
| 17***14 | Lines Group-Engine Oil Drain | 1 |
| 21***75 | Lines Group-Cooling Air; -Turbocharger, Aftercooler | 1 |
| 23***87 | Radiator & Hydraulic Oil Cooler Group | 1 |
292-2660 Special Ar-Oem
| 19***43 | Belt Tensioner | 1 |
| 29***60 | Special Ar-Oem | 1 |
| 6V***39 | Washer-Hard-Alt Strap To Fan Drive Belt | 1 |
287-2558 Special Ar-Oem -325d
| 17***14 | Lines Group-Engine Oil Drain | 1 |
| 21***75 | Lines Group-Cooling Air; -Turbocharger, Aftercooler | 1 |
| 23***87 | Radiator & Hydraulic Oil Cooler Group | 1 |
294-5669 Special Ar-Oem
| 17***73 | Drive Group-Fan | 1 |
| 18***51 | Support-Compressor | 1 |
| 29***69 | Special Ar-Oem | 1 |
Operator Station
245-7896 Adjuster Gp-Seat -Lower Slide
| 24***96 | Adjuster Group-Seat; -Lower Slide | 1 |
| 26***10 | Control Group-Handle; -Joystick, Lh | 1 |
| 29***31 | Valve Group-Pilot; -Joystick, Lh | 1 |
229-9080 Air Conditioner & Mounting Gp
| 14***36 | Pin-Connector; (14-Ga To 18-Ga) | 17 |
| 22***80 | Air Conditioner & Mounting Group | 1 |
| 24***94 | Receptacle As-Connector; (12-Pin) | 1 |
229-9079 Air Conditioner Ar
| 22***79 | Air Conditioner Ar | 1 |
| 23***99 | Cover As | 1 |
| 23***02 | Cover-Access; (Fuse-Rear Panel) | 1 |
316-8812 Air Conditioner Gp
| 31***12 | Air Conditioner Group | 1 |
229-9081 Air Conditioner Gp
| 15***43 | Cover | 1 |
| 15***44 | Cover | 1 |
| 17***42 | Cover | 1 |
316-8917 Air Conditioner Gp
| 13***00 | Door Group-Cab | 1 |
| 15***77 | Hinge | 2 |
| 31***17 | Air Conditioner Group | 1 |
309-5789 Antenna & Mounting Gp -Product Link
| 11***38 | Screw; (M6x1x20-mm) | 4 |
| 15***03 | Handle; (Pull) | 1 |
| 15***04 | Cap | 2 |
259-7347 Armrest Gp -Lh
| 11***38 | Screw; (M6x1x20-mm) | 4 |
| 15***03 | Handle; (Pull) | 1 |
| 15***04 | Cap | 2 |
259-7346 Armrest Gp -Rh
| 11***38 | Screw; (M6x1x20-mm) | 4 |
| 15***97 | Clip | 45 |
| 15***71 | Glass | 1 |
346-7375 Bracket Gp-Mirror
| 15***77 | Hinge | 2 |
| 17***64 | Door Group; (Cab) | 1 |
| 18***96 | Door As | 1 |
259-7295 Bracket Gp-Mirror
| 11***38 | Screw; (M6x1x20-mm) | 4 |
| 15***97 | Clip | 45 |
| 15***71 | Glass | 1 |
282-6526 Bracket Gp-Mounting -Wiper Switch
| 15***67 | Door As | 1 |
| 15***77 | Hinge | 2 |
| 26***65 | Door Group-Cab | 1 |
280-0457 Cab Ar -Demolition
| 11***38 | Screw; (M6x1x20-mm) | 4 |
| 15***03 | Handle; (Pull) | 1 |
| 15***04 | Cap | 2 |
284-1180 Cab Ar
| 11***38 | Screw; (M6x1x20-mm) | 4 |
| 15***97 | Clip | 45 |
| 15***71 | Glass | 1 |
293-4394 Cab Ar
| 17***96 | Clip | 3 |
| 23***76 | Duct As; (Fresh Air, Upper) | 1 |
| 23***77 | Duct As; (Vent, Rear) | 1 |
265-6462 Cab Gp -Exterior
| 08***49 | Packing | 2 |
| 10***81 | Screw-Truss Head | 4 |
| 16***94 | Catch | 1 |
282-4066 Cab Gp
| 09***26 | Lockwasher-Tooth; (M4 Id) | 2 |
| 09***30 | Screw-Machine; (M4x0.07x6-mm) | 2 |
| 11***68 | Bracket | 1 |
280-0436 Cab Gp -Demolition
| 26***72 | Horn Group-Electric | 1 |
| 28***36 | Cab Group; -Demolition | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
256-7414 Cab Gp -Exterior
| 20***61 | Guard As | 1 |
| 20***64 | Guard As | 1 |
| 20***67 | Guard As | 1 |
235-8910 Cab Gp -Exterior
| 20***59 | Guard Group-Vandalism; -Cab | 1 |
| 22***55 | Storage Group-Vandalism Guard | 1 |
| 23***10 | Cab Group; -Exterior | 1 |
229-9098 Cab Gp
| 22***98 | Cab Group | 1 |
229-9099 Cab Gp
| 19***59 | Guard Group-Overhead | 1 |
| 22***99 | Cab Group | 1 |
| 24***08 | Handrail Group; -Cab | 1 |
235-8908 Cab Gp -Interior
| 19***59 | Guard Group-Overhead | 1 |
| 23***08 | Cab Group; -Interior | 1 |
| 25***42 | Lighting Group-Flood; -Cab Guard | 1 |
264-4287 Cab Gp
| 09***82 | Nut Self-Locking; (M8x1.25 Thd) | 2 |
| 11***24 | Spring As; (Gas) | 2 |
| 14***18 | Spacer; (13.5x30x10-mm Thk) | 2 |
287-7821 Cab Gp -Demolition
| 17***75 | Horn As; (24-Volt, High Tone) | 1 |
| 27***07 | Harness As-Wiring; (Horn) | 1 |
| 28***21 | Cab Group; -Demolition | 1 |
265-5440 Cab Gp -Interior
| 09***82 | Nut Self-Locking; (M8x1.25 Thd) | 2 |
| 11***24 | Spring As; (Gas) | 2 |
| 14***18 | Spacer; (13.5x30x10-mm Thk) | 2 |
329-6569 Camera & Mirror Ar -Work Area Visual System
| 09***26 | Lockwasher-Tooth; (M4 Id) | 2 |
| 09***30 | Screw-Machine; (M4x0.07x6-mm) | 2 |
| 13***89 | Clip; (Ladder) | 1 |
245-7836 Coil Gp-Evaporator
| 18***00 | Screw-Tapping | 6 |
| 19***66 | Relay; (Compressor Clutch) | 4 |
| 24***13 | Motor As | 1 |
212-8518 Compressor Gp-Refrigerant
| 16***42 | Connector; (Receptacle) | 1 |
| 16***43 | Terminal; (Male) | 5 |
| 21***18 | Compressor Group-Refrigerant; (Refrigerant) | 1 |
276-3815 Compressor Gp-Refrigerant
| 24***95 | Kit-Clip; (Includes 28-Clips) | 1 |
| 27***15 | Compressor Group-Refrigerant | 1 |
| 32***46 | Kit-Cylinder; (Dampener)(Dampener) | 1 |
245-7909 Condenser & Mtg Gp-Refrigerant
| 24***95 | Kit-Clip; (Includes 28-Clips) | 1 |
| 24***09 | Condenser & Mtg Group-Refrigerant | 1 |
| 32***46 | Kit-Cylinder; (Dampener)(Dampener) | 1 |
273-5315 Condenser Gp-Refrigerant
| 10***73 | Clip | 5 |
| 10***78 | Guard (25cm); (40-cm) | 0 |
| 12***98 | Bracket Assem. | 1 |
334-6569 Condenser Gp-Refrigerant
| 33***62 | Mirror Group-Down View; -Fuel Tank, Rh | 1 |
| 33***66 | Fender & Cover Group | 1 |
| 33***69 | Condenser Group-Refrigerant | 1 |
259-7348 Console Gp-Operator -Rh
| 25***95 | Bracket Group-Mirror | 1 |
| 25***48 | Console Group-Operator; -Rh | 1 |
| 32***50 | Mirror Group-Rear View | 1 |
245-7922 Console Gp-Operator
| 13***75 | Bolt As-Locking; (M12x1.75x30-mm)(M12x1.75x30-mm)) | 3 |
| 24***22 | Console Group-Operator | 1 |
| 32***25 | Tube As | 1 |
259-7349 Console Gp-Operator -Lh
| 25***95 | Bracket Group-Mirror | 1 |
| 25***49 | Console Group-Operator; -Lh | 1 |
| 32***50 | Mirror Group-Rear View | 1 |
270-5690 Control & Mtg Gp-Joystick -3-Button, Trigger Switch
| 17***97 | Control Group-Pilot Operated Hydraulic; -Travel | 1 |
| 22***72 | Control & Mtg Group-Machine | 1 |
| 22***65 | Mounting Group-Cab; -Rear | 1 |
270-5689 Control & Mtg Gp-Joystick -2-Button, Slide, Trigger Sw
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 7 |
| 16***74 | Louver As-Vent | 2 |
| 23***72 | Cover | 1 |
259-7598 Control & Mtg Gp-Joystick -With Slide Control
| 25***98 | Control & Mtg Group-Joystick; -With Modulation Switch | 1 |
| 32***82 | Monitor Group-Operator | 1 |
| 9X***46 | Screw-Truss Head (M6x1x35mm); (M6x1x35-mm) | 3 |
270-5688 Control & Mtg Gp-Joystick -3-Button, Trigger Switch
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 17 |
| 24***94 | Receptacle As-Connector; (12-Pin) | 1 |
| 24***95 | Receptacle As-Connector; (12-Pin) | 1 |
221-8884 Control & Mtg Gp-Pedal -Lh
| 22***84 | Control & Mtg Group-Pedal; -Lh | 1 |
| 24***08 | Handrail Group; -Cab | 1 |
| 25***41 | Lighting Group-Flood; -Cab | 1 |
270-6107 Control Gp-Foot -Left On/Off Switch
| 25***26 | Fastener Group-Wiring Harness; -Straight Travel | 1 |
| 25***43 | Lines Group-Pilot; -Third Pedal, Pilot Valve | 1 |
| 25***77 | Lines Group-Pilot; -Control Valve, Travel Valve | 1 |
260-2127 Control Gp-Handle -Joystick, Rh
| 13***65 | Grommet | 1 |
| 13***66 | Grommet | 1 |
| 16***49 | Cover | 2 |
260-2110 Control Gp-Handle -Joystick, Lh
| 13***65 | Grommet | 1 |
| 13***66 | Grommet | 1 |
| 16***49 | Cover | 2 |
297-4590 Control Gp-Handle -Lh
| 29***90 | Control Group-Handle; -Lh | 1 |
| 33***08 | Software Group-Communication; (Product Link 121sr) | 1 |
260-2109 Control Gp-Handle -Joystick, Rh
| 25***26 | Fastener Group-Wiring Harness; -Straight Travel | 1 |
| 25***79 | Control Group-Hydraulic Pedal; -Third Pedal, Straight Travel | 1 |
| 26***09 | Control Group-Handle; -Joystick, Rh | 1 |
260-2128 Control Gp-Handle -Joystick, Lh
| 10***04 | Screw As; (M5x0.8x10-mm) | 2 |
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 2 |
| 23***60 | Cable | 1 |
275-7648 Control Gp-Hydraulic Pedal -Lh
| 22***75 | Seat Group-Suspension; -Low Back, Tilt | 1 |
| 27***48 | Control Group-Hydraulic Pedal; -Lh | 1 |
| 6V***02 | Bolt-Socket Head; (M8x1.25x16-mm) | 4 |
259-7179 Control Gp-Hydraulic Pedal -Third Pedal, Straight Travel
| 22***56 | Support | 1 |
| 22***57 | Support | 1 |
| 22***18 | Shade As-Sun | 1 |
259-7705 Control Gp-Joystick -Rh
| 22***89 | Seat Group-Suspension; -High Back, Tilt | 1 |
| 25***05 | Control Group-Joystick; -Rh | 1 |
| 6V***02 | Bolt-Socket Head; (M8x1.25x16-mm) | 4 |
259-7763 Control Gp-Joystick -Lh
| 25***63 | Control Group-Joystick; -Lh | 1 |
| 32***08 | Seat Group-Suspension; -Air Susp, High Back, Tilt | 1 |
| 5A***04 | Bolt-Socket Head; (M8x1.25x25-mm) | 2 |
270-5666 Control Gp-Joystick -Rh
| 16***42 | Connector; (Receptacle) | 1 |
| 16***43 | Terminal; (Male) | 4 |
| 23***11 | Switch As-Rocker; (Heated Seat) | 1 |
270-5667 Control Gp-Joystick -Lh
| 27***67 | Control Group-Joystick; -Lh | 1 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
| 8S***23 | Bolt; (7/16-20x1.5-In) | 1 |
259-7762 Control Gp-Joystick -Rh
| 25***62 | Control Group-Joystick; -Rh | 1 |
| 32***07 | Seat Group-Suspension; -High Back, Tilt | 1 |
| 6V***02 | Bolt-Socket Head; (M8x1.25x16-mm) | 4 |
297-0535 Control Gp-Joystick -Lh
| 23***20 | Seat Belt Group; -Retractable, 76-mm | 1 |
| 29***35 | Control Group-Joystick; -Lh | 1 |
297-0534 Control Gp-Joystick -Rh
| 27***46 | Seat Belt Group; -Retractable, 46-mm | 1 |
| 29***34 | Control Group-Joystick; -Rh | 1 |
259-7706 Control Gp-Joystick -Lh
| 24***62 | Seat Group-Suspension; -Air Susp, High Back, Tilt | 1 |
| 25***06 | Control Group-Joystick; -Lh | 1 |
| 6V***02 | Bolt-Socket Head; (M8x1.25x16-mm) | 4 |
247-5276 Control Gp-Pedal -Electric
| 24***76 | Control Group-Pedal; -Electric | 1 |
| 32***41 | Seat Belt Group; (Retractable, 43-mm) | 1 |
309-5808 Control Gp-Pedal -Electric
| 24***83 | Kit-Seat | 1 |
| 24***87 | Lever-Control | 1 |
| 24***88 | Kit-Seat Support | 1 |
297-0540 Control Gp-Joystick -Rh
| 29***40 | Control Group-Pilot Operated Hydraulic; -Rh | 1 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
| 8S***23 | Bolt; (7/16-20x1.5-In) | 1 |
297-0538 Control Gp-Pilot Operated Hyd -Rh
| 17***59 | Handle; (Lumbar Support Adjuster) | 1 |
| 29***38 | Control Group-Pilot Operated Hydraulic; -Rh | 1 |
| 31***87 | Bracket | 2 |
170-9497 Control Gp-Pilot Operated Hyd -Travel
| 17***97 | Control Group-Pilot Operated Hydraulic; -Travel | 1 |
| 17***59 | Handle; (Lumbar Support Adjuster) | 1 |
| 22***94 | Headrest As-Seat; -Cloth | 1 |
297-0541 Control Gp-Joystick -Lh
| 29***41 | Control Group-Pilot Operated Hydraulic; -Lh | 1 |
| 32***40 | Seat Belt Group; (Retractable, 76-mm) | 1 |
297-0539 Control Gp-Pilot Operated Hyd -Lh
| 17***59 | Handle; (Lumbar Support Adjuster) | 1 |
| 29***39 | Control Group-Pilot Operated Hydraulic; -Lh | 1 |
| 31***87 | Bracket | 2 |
234-6501 Cover Gp-Cab -Rear
| 22***76 | Seat Group; -Low Back, Tilt | 1 |
| 22***77 | Suspension Group-Seat; -Mechanical | 1 |
| 23***01 | Cover Group-Access; -Cab, Rear | 1 |
249-0530 Cover Gp-Cab -Exterior, Lh
| 22***77 | Suspension Group-Seat; -Mechanical | 1 |
| 22***90 | Seat Group; -High Back, Tilt | 1 |
| 24***30 | Cover Group-Cab; -Exterior, Lh | 1 |
234-6500 Cover Gp-Storage -Cab, Rear
| 22***90 | Seat Group; -High Back, Tilt | 1 |
| 23***00 | Cover Group-Storage; -Cab, Rear | 1 |
| 24***63 | Protector, Suspension Group-Seat; -Air | 1 |
189-2768 Door & Mtg Gp-Cab
| 18***68 | Door & Mtg Group-Cab | 1 |
| 31***87 | Bracket | 2 |
| 32***12 | Seat Group; -High Back, Tilt | 1 |
176-1964 Door Gp-Cab
| 14***21 | Kit-Clip; (Seat) | 1 |
| 17***64 | Door Group; (Cab) | 1 |
| 24***68 | Cover As | 1 |
139-7100 Door Gp-Cab
| 13***00 | Door Group-Cab | 1 |
| 31***87 | Bracket | 2 |
| 32***13 | Seat Group; -High Back, With Heater | 1 |
189-2793 Door & Mtg Gp-Cab
| 18***93 | Door Group-Cab | 1 |
| 31***87 | Bracket | 2 |
| 32***12 | Seat Group; -High Back, Tilt | 1 |
265-5365 Door Gp-Cab
| 19***99 | Screw-Button Head; (M8x1.25x20-mm) | 2 |
| 20***48 | Absorber As-Shock; (Sideshift) | 1 |
| 24***97 | Plate | 8 |
265-5364 Door Gp-Cab
| 14***21 | Kit-Clip; (Seat) | 1 |
| 24***68 | Cover As | 1 |
| 24***89 | Adjuster Group-Seat; -Upper Slide | 1 |
229-9082 Duct Gp-Cab Air
| 22***82 | Duct Group-Cab Air | 1 |
| 32***44 | Kit-Bracket; (Console Raise, Lower) | 1 |
| 32***45 | Kit-Seat Suspension; -Mechanical | 1 |
257-1110 Floor Mat
| 25***10 | Floor Mat | 1 |
| 32***44 | Kit-Bracket; (Console Raise, Lower) | 1 |
| 32***48 | Kit-Adjuster; (Seat Position) | 1 |
250-0712 Guard Ar-Overhead -Window
| 09***72 | Screw-Machine; (M4x0.7x16-mm) | 12 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 8 |
| 10***80 | Bolt-Socket Head; (M6x1x45-mm) | 4 |
249-7109 Guard Ar-Overhead
| 18***57 | Angle As | 1 |
| 18***60 | Rod | 1 |
| 24***09 | Guard Ar-Overhead | 1 |
229-1777 Guard Ar-Vandalism
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 8 |
| 16***46 | Cup | 1 |
| 16***55 | Panel-Switch; (Operator Console) | 1 |
259-8749 Guard Gp-Overhead -Demolition
| 14***95 | Hose; (650-cm Each) | 0 |
| 16***95 | Strap; (Cable) | 2 |
| 17***31 | Tank As-Window Washer | 1 |
194-3259 Guard Gp-Overhead
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 8 |
| 16***46 | Cup | 1 |
| 16***55 | Panel-Switch; (Operator Console) | 1 |
207-0159 Guard Gp-Vandalism -Cab
| 14***95 | Hose; (650-cm Each) | 0 |
| 16***95 | Strap; (Cable) | 1 |
| 17***31 | Tank As-Window Washer | 1 |
253-9224 Guard Gp-Window
| 09***80 | Tape - Color; (Blue) | 2 |
| 09***82 | Tape-Color; (Yellow) | 2 |
| 13***73 | Bolt As; (M12x1.75x25-mm) | 1 |
139-7099 Hatch Gp-Roof
| 09***23 | Screw-Machine; (M6x1x6-mm) | 2 |
| 10***00 | Screw As; (M6x1x20-mm) | 2 |
| 11***06 | Switch; (Window Lower Limit) | 1 |
189-2849 Hatch Gp-Roof
| 13***19 | Ring | 2 |
| 15***73 | Glass; (Lower Front) | 1 |
| 15***31 | Stopper | 2 |
229-9094 Headrest As-Seat -Cloth
| 09***29 | Ring-Key | 1 |
| 15***90 | Glass; (Lh) | 1 |
| 15***69 | Glass | 1 |
267-8071 Horn Gp-Electric
| 10***89 | Rivet-Pop | 2 |
| 16***36 | Glass; (Lh) | 1 |
| 21***24 | Glass; (Rear) | 1 |
291-7559 Horn Gp-Electric
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 6 |
| 13***34 | Seal; (111-cm Each) | 0 |
| 16***61 | Bumper | 2 |
267-8072 Horn Gp-Electric
| 18***54 | Switch As; (Cab Window Limit) | 1 |
| 25***25 | Switch Group-Wiper | 1 |
| 25***26 | Window Group-Cab; -Front Window, 50/50-Split | 1 |
277-9100 Horn Gp-Electric -24-Volt, High Tone
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 1 |
| 13***34 | Seal; (111-cm Each) | 0 |
| 16***64 | Glass; (Front) | 1 |
245-7812 Housing Gp-Air Conditioner -Inlet Air
| 09***72 | Screw-Machine; (M4x0.7x16-mm) | 2 |
| 16***62 | Ring-Retaining | 4 |
| 16***63 | Screw; (M4x0.7x20-mm) | 18 |
231-1768 Installation Gp-Radio
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 1 |
| 16***83 | Bracket | 8 |
| 19***57 | Bracket | 2 |
251-0538 Radio Gp -Am/Fm
| 25***38 | Installation Group-Radio | 1 |
| 31***67 | Film-Stripe; (Cab, Side, Lh) | 1 |
327-6645 Kit-Seat Suspension -Mechanical
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 1 |
| 16***83 | Bracket | 6 |
| 19***57 | Bracket | 3 |
333-4157 Kit-Seat Suspension -Air
| 10***89 | Rivet-Pop | 2 |
| 13***14 | Hammer Group | 1 |
| 14***97 | Strip | 1 |
164-0528 Lever Gp-Cab Door
| 13***54 | Screw-Truss Head; (M4x0.7x10-mm) | 2 |
| 16***28 | Lever Group-Cab Door | 1 |
| 18***54 | Switch As; (Cab Window Limit) | 2 |
229-9071 Lines Gp-Air Conditioner
| 09***72 | Screw-Machine; (M4x0.7x16-mm) | 2 |
| 16***62 | Ring-Retaining | 4 |
| 16***63 | Screw; (M4x0.7x20-mm) | 18 |
7y-0059 Literature Gp
| 13***54 | Screw-Truss Head; (M4x0.7x10-mm) | 2 |
| 18***54 | Switch As; (Cab Window Limit) | 2 |
| 19***12 | Seal-O-Ring | 1 |
330-1353 Mirror Ar-Rear View
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 2 |
| 13***34 | Seal; (111-cm Each) | 0 |
| 13***27 | Holder | 1 |
330-1162 Mirror Gp-Down View -Fuel Tank, Rh
| 09***72 | Screw-Machine; (M4x0.7x16-mm) | 2 |
| 16***62 | Ring-Retaining | 4 |
| 16***63 | Screw; (M4x0.7x20-mm) | 30 |
332-1728 Mirror Gp-Rear View -Without Front Guard
| 28***62 | Frame | 1 |
| 28***63 | Seal | 1 |
| 28***64 | Seal | 1 |
142-3836 Mirror Gp-Rear View -Front, Rh
| 10***89 | Rivet-Pop | 2 |
| 13***14 | Hammer Group | 1 |
| 14***36 | Mirror Group-Rear View; -Front, Rh | 1 |
327-6550 Mirror Gp-Rear View
| 14***03 | Kit-Catch; (Window) | 1 |
| 21***34 | Kit-Seal; (Window) | 1 |
| 21***35 | Kit-Window; (Front) | 1 |
332-1729 Mirror Gp-Rear View -With Front Guard
| 23***33 | Wiper Group-Window; -Front Window, 1-Piece | 1 |
| 24***14 | Window Group-Cab; -Front Window, 1-Piece | 1 |
| 33***29 | Mirror Group-Rear View; -With Front Guard | 1 |
221-8813 Monitor & Mtg Gp-Operator
| 22***13 | Monitor & Mtg Group-Operator | 1 |
| 24***27 | Wiper Group-Window; -Front Window, 70/30-Split | 1 |
| 28***32 | Window Group-Cab; -Front Window, 70/30-Split | 1 |
327-7482 Monitor Gp-Operator
| 21***65 | Spring | 2 |
| 21***56 | Fitting | 1 |
| 23***06 | Kit-Support; (Window Wiper) | 1 |
260-2193 Monitor Gp-Operator
| 23***33 | Wiper Group-Window; -Front Window, 1-Piece | 1 |
| 26***93 | Monitor Group-Operator | 1 |
| 26***33 | Window Group-Cab; -Front Window, 1-Piece | 1 |
349-5408 Monitor Gp-Operator
| 12***53 | Washer; (20.5x30x2-mm Thk) | 1 |
| 15***42 | Relay As; (Upper)(Wiper) | 1 |
| 16***68 | Arm As-Wiper | 1 |
277-9130 Motor Gp-Window Wiper
| 14***95 | Hose; (650-cm Each) | 0 |
| 19***18 | Blade As-Wiper; (Twin Blade) | 1 |
| 21***56 | Fitting | 1 |
330-5054 Motor Gp-Window Wiper
| 14***95 | Hose; (650-cm Each) | 0 |
| 20***35 | Wiper Group-Window; -Front, 50/50-Split | 1 |
| 21***57 | Cover | 2 |
330-5055 Motor Gp-Window Wiper
| 14***95 | Hose; (650-cm Each) | 0 |
| 21***57 | Cover | 2 |
| 23***34 | Support As | 1 |
225-5765 Mounting Gp-Cab -Rear
| 01***16 | Setscrew; (8-32x0.5-In) | 1 |
| 12***95 | Plug | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
245-7811 Mounting Gp-Platform
| 21***56 | Fitting | 1 |
| 23***06 | Kit-Support; (Window Wiper) | 1 |
| 23***63 | Nozzle | 1 |
229-9072 Operator Ar
| 22***72 | Operator Ar | 1 |
| 25***54 | Film-Notice; (Hammer, Read Omm) | 1 |
| 26***41 | Film-Information; (Operator Controls, Read Omm)(Joystick W/ Slide Control) | 1 |
249-7107 Parts Ar-Cab
| 24***07 | Parts Ar-Cab; -Handrail, Floodlight | 1 |
| 25***54 | Film-Notice; (Hammer, Read Omm) | 1 |
| 26***42 | Film-Information; (Operator Controls, Read Omm) | 1 |
255-5845 Pedal Ar-Auxiliary -Lh
| 25***54 | Film-Notice; (Hammer, Read Omm) | 1 |
| 25***45 | Pedal Ar-Auxiliary; -Lh | 1 |
| 26***48 | Film-Instruction; (Operator Controls, Read Omm) | 1 |
259-7177 Pedal Ar-Auxiliary
| 17***15 | Film-Instruction; (Hammer Control) | 1 |
| 25***54 | Film-Notice; (Hammer, Read Omm) | 1 |
| 25***77 | Pedal Ar-Auxiliary; -Third Pedal, Straight Travel | 1 |
289-2188 Pedal Ar-Third -Straight Travel
| 25***70 | Film-Instruction; (Alt Pattern Control, Read Omm) | 1 |
| 25***71 | Plate-Instruction; (Control Pattern, Read Omm) | 1 |
| 25***73 | Film-Warning; (Crush Hazard, Read Omm, Intl) | 1 |
282-7694 Plate As-Bracket
| 28***94 | Plate As-Bracket | 1 |
| 30***72 | Film-Warning; (Explosion Hazard, Read Omm) | 1 |
263-6277 Platform Gp-Operator
| 23***63 | Film-Identification; (Smartboom) | 1 |
| 26***44 | Film-Warning; (Boom Float) | 1 |
| 26***77 | Platform Group-Operator | 1 |
263-9088 Radio Gp-Communication -Product Link 121sr
| 12***07 | Film-Instruction; (On Radiator Filler Cap) | 3 |
| 13***58 | Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap) | 1 |
| 14***47 | Film; (Identification) (24v) (On Outside Of Battery Compartment Door) | 1 |
336-3545 Radio Gp-Communication -Product Link 121sr
| 22***17 | Film; (Warning) (Seatbelt) (On Lh Post Inside Cab) | 1 |
| 22***45 | Film-Warning; (Do Not Use Ether, U.S) | 1 |
| 22***13 | Film; (Warning) (Jump Start) (Inside Of Lh Battery Box Cover) | 1 |
184-7621 Screen Gp-Sun
| 10***12 | Film-Instruction; (Alternate Exit, Remove Window) | 1 |
| 10***42 | Film-Instruction; (Alternate Exit) | 1 |
| 13***58 | Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap) | 1 |
327-6502 Seat & Mounting Gp -High Back, Tilt
| 32***02 | Seat & Mounting Group; -High Back, Tilt | 1 |
240-5003 Seat & Mounting Gp -High Back, Tilt
| 24***03 | Seat & Mounting Group; -High Back, Tilt | 1 |
327-6503 Seat & Mounting Gp -High Back, With Heater
| 32***03 | Seat & Mounting Group; -High Back, With Heater | 1 |
327-6501 Seat & Mounting Gp -High Back, Tilt
| 32***01 | Seat & Mounting Group; -High Back, Tilt | 1 |
240-5061 Seat & Mounting Gp -Air Susp, High Back, Tilt
| 24***61 | Seat & Mounting Group; -Air Susp, High Back, Tilt | 1 |
240-4999 Seat & Mounting Gp -Low Back, Tilt
| 10***12 | Film-Instruction; (Alternate Exit, Remove Window) | 1 |
| 10***42 | Film-Instruction; (Alternate Exit) | 1 |
| 13***58 | Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap) | 1 |
240-5039 Seat Belt Gp -Retractable, 76-Mm
| 24***39 | Seat Belt Group; -Retractable, 76-mm | 1 |
273-5446 Seat Belt Gp -Retractable, 46-Mm
| 27***46 | Seat Belt Group; -Retractable, 46-mm | 1 |
240-5037 Seat Belt Gp -Retractable, 46-Mm
| 24***37 | Seat Belt Group; -Retractable, 46-mm | 1 |
235-9020 Seat Belt Gp -Retractable, 76-Mm
| 23***20 | Seat Belt Group; -Retractable, 76-mm | 1 |
305-0466 Seat Belt Gp -Retractable, 76-Mm
| 30***66 | Seat Belt Group; -Retractable, 76-mm | 1 |
305-0467 Seat Belt Gp -Retractable, 43-Mm
| 30***67 | Seat Belt Group; -Retractable, 43-mm | 1 |
327-6513 Seat Gp -High Back, With Heater
| 32***13 | Seat Group; -High Back, With Heater | 1 |
229-9090 Seat Gp -High Back, Tilt
| 22***90 | Seat Group; -High Back, Tilt | 1 |
327-6512 Seat Gp -High Back, Tilt
| 32***12 | Seat Group; -High Back, Tilt | 1 |
229-9076 Seat Gp -Low Back, Tilt
| 22***76 | Seat Group; -Low Back, Tilt | 1 |
240-5062 Seat Gp-Suspension -Air Susp, High Back, Tilt
| 24***62 | Seat Group-Suspension; -Air Susp, High Back, Tilt | 1 |
327-6507 Seat Gp-Suspension -High Back, Tilt
| 32***07 | Seat Group-Suspension; -High Back, Tilt | 1 |
229-9089 Seat Gp-Suspension -High Back, Tilt
| 22***89 | Seat Group-Suspension; -High Back, Tilt | 1 |
327-6508 Seat Gp-Suspension -High Back, Tilt
| 32***08 | Seat Group-Suspension; -Air Susp, High Back, Tilt | 1 |
327-6509 Seat Gp-Suspension -High Back, With Heater
| 32***09 | Seat Group-Suspension; -High Back, With Heater | 1 |
229-9075 Seat Gp-Suspension -Low Back, Tilt
| 22***75 | Seat Group-Suspension; -Low Back, Tilt | 1 |
235-8856 Support Gp-Seat
| 23***56 | Support Group-Seat | 1 |
327-6523 Support Gp-Seat
| 32***23 | Support Group-Seat | 1 |
245-7892 Suspension Gp-Seat -Mechanical
| 24***92 | Suspension Group-Seat; -Mechanical | 1 |
229-9077 Suspension Gp-Seat -Mechanical
| 22***77 | Suspension Group-Seat; -Mechanical | 1 |
327-6520 Suspension Gp-Seat -Mechanical
| 32***20 | Suspension Group-Seat; -Mechanical | 1 |
273-5384 Suspension Gp-Seat -Air
| 27***84 | Suspension Group-Seat; -Air | 1 |
327-6521 Suspension Gp-Seat -Air
| 32***21 | Suspension Group-Seat; -Air | 1 |
240-5063 Suspension Gp-Seat -Air
| 24***63 | Protector, Suspension Group-Seat; -Air | 1 |
284-3877 Tank Gp-Window Washer
| 28***77 | Tank Group-Window Washer | 1 |
249-2664 Trim Gp-Cab -Interior, Front
| 24***64 | Trim Group-Cab; -Interior, Front | 1 |
249-2663 Trim Gp-Cab -Interior, Rear
| 24***63 | Trim Group-Cab; -Interior, Rear | 1 |
265-2815 Visor Gp-Cab
| 26***15 | Visor Group-Cab | 1 |
274-5098 Washer Gp-Window
| 27***98 | Washer Group-Window | 1 |
229-9070 Washer Gp-Window
| 22***70 | Washer Group-Window | 1 |
253-4237 Washer Gp-Window
| 25***37 | Washer Group-Window | 1 |
280-1434 Washer Gp-Window
| 28***34 | Washer Group-Window | 1 |
252-1226 Window Gp-Cab -Front Window, 50/50-Split
| 25***26 | Window Group-Cab; -Front Window, 50/50-Split | 1 |
235-8909 Window Gp-Cab -Side, Rear
| 23***09 | Window Group-Cab; -Side, Rear | 1 |
282-6520 Window Gp-Cab -Front, 50/50-Split
| 28***20 | Window Group-Cab; -Front, 50/50-Split | 1 |
282-6534 Window Gp-Cab -Front Window, 70/30-Split
| 28***34 | Window Group-Cab; -Front Window, 70/30-Split | 1 |
260-1735 Window Gp-Cab -High Resistant Glass
| 26***35 | Window Group-Cab; -1-Piece, High Resistant Glass | 1 |
262-7933 Window Gp-Cab -High Resistant Glass
| 26***33 | Window Group-Cab; -Front Window, 1-Piece | 1 |
282-6532 Window Gp-Cab -Front Window, 70/30-Split
| 28***32 | Window Group-Cab; -Front Window, 70/30-Split | 1 |
249-7114 Window Gp-Cab -Front Window, 1-Piece
| 24***14 | Window Group-Cab; -Front Window, 1-Piece | 1 |
336-6782 Window Gp-Cab -Sides, Top, Back
| 33***82 | Window Group-Cab; -Sides, Top, Back | 1 |
176-1958 Window Gp-Cab -Front, Lower
| 17***58 | Window Group-Cab; -Front, Lower | 1 |
249-2665 Window Gp-Cab -Rear, Side, Top Windows
| 24***65 | Window Group-Cab; -Rear, Side, Top Windows | 1 |
282-6535 Window Gp-Cab -Front Window, 70/30-Split
| 28***35 | Window Group-Cab; -Front Window, 70/30-Split | 1 |
249-7112 Window Gp-Cab -Front Window, 50/50-Split
| 24***12 | Window Group-Cab; -Front Window, 50/50-Split | 1 |
139-7101 Window Gp-Cab -Front, Upper
| 13***01 | Window Group-Cab; -Front, Upper | 1 |
282-6519 Window Gp-Cab -Front, 50/50-Split
| 28***19 | Window Group-Cab; -Front, 50/50-Split | 1 |
249-2666 Window Gp-Cab -Sides, Top, Back
| 24***66 | Window Group-Cab; -Sides, Top, Back | 1 |
265-5458 Window Gp-Cab -Rear, Side, Top Windows
| 26***58 | Window Group-Cab; -Rear, Side, Top Windows | 1 |
252-1227 Window Gp-Cab -Front Window, 50/50-Split
| 25***27 | Window Group-Cab; -Front Window, 50/50-Split | 1 |
282-6518 Window Gp-Cab -Front, 50/50-Split
| 28***18 | Window Group-Cab; -Front, 50/50-Split | 1 |
151-6792 Window Gp-Door
| 15***92 | Window Group-Door; (Door) | 1 |
286-8861 Window Gp-Door
| 28***61 | Window Group-Door; -Glass | 1 |
249-2760 Wiper & Window Ar-Cab -Front, 50/50-Split
| 24***60 | Wiper & Window Ar-Cab; -Front, 50/50-Split | 1 |
263-8848 Wiper & Window Ar-Cab -High Resistant Glass
| 26***48 | Wiper & Window Ar-Cab; -High Resistant Glass | 1 |
249-2759 Wiper & Window Ar-Cab -Front Window, 1-Piece
| 24***59 | Wiper & Window Ar-Cab; -Front Window, 1-Piece | 1 |
249-7113 Wiper & Window Ar-Cab -Front Window, 70/30-Split
| 24***13 | Wiper & Window Ar-Cab; -Front Window, 70/30-Split | 1 |
234-6594 Wiper Gp-Window -Front, Upper
| 23***94 | Wiper Group-Window; -Front, Upper | 1 |
202-6235 Wiper Gp-Window -Front, 50/50-Split
| 20***35 | Wiper Group-Window; -Front, 50/50-Split | 1 |
239-3433 Wiper Gp-Window -Front Window, 1-Piece
| 23***33 | Wiper Group-Window; -Front Window, 1-Piece | 1 |
247-8427 Wiper Gp-Window -Front Window, 70/30-Split
| 24***27 | Wiper Group-Window; -Front Window, 70/30-Split | 1 |
259-8891 Wiper Gp-Window -Top
| 25***91 | Wiper Group-Window | 1 |
287-7534 Wiper Gp-Window -Front Window, 70/30-Split
| 28***34 | Wiper Group-Window; -Front Window, 70/30-Split | 1 |
247-8426 Wiper Gp-Window -Front, 50/50-Split
| 24***26 | Wiper Group-Window; -Front, 50/50-Split | 1 |
Power Train
227-6116 Drive Gp-Final -Without Motor
| 16***76 | Hinge | 2 |
| 20***89 | Cushion | 1 |
| 22***16 | Drive Group-Final; -Without Motor | 1 |
148-4233 Drive Gp-Final -With Motor
149-3577 Drive Gp-Final -Without Motor
| 09***18 | Nut (M6x1.0 Thd) | 4 |
| 14***77 | Drive Group-Final; (Without Motor), Seal, Seal; Rot.Shaft Lip Seal | 1 |
| 16***76 | Hinge | 2 |
267-6796 Drive Gp-Final -Without Motor
| 09***18 | Nut (M6x1.0 Thd) | 4 |
| 12***01 | Rubber | 1 |
| 16***76 | Hinge | 2 |
338-7338 Fastener Gp-Final Drive
| 09***18 | Nut (M6x1.0 Thd) | 4 |
| 12***01 | Rubber | 1 |
| 16***76 | Hinge | 2 |
227-6115 Final Drive Gp -With Travel Motor
| 16***76 | Hinge | 2 |
| 20***89 | Cushion | 1 |
| 22***15 | Final Drive Group; -With Travel Motor | 1 |
267-6877 Final Drive Gp -With Motor
| 09***18 | Nut (M6x1.0 Thd) | 4 |
| 16***76 | Hinge | 2 |
| 23***98 | Door As-Access | 1 |
152-0946 Final Drive Gp -With Motor
| 09***18 | Nut (M6x1.0 Thd) | 4 |
| 12***01 | Rubber | 1 |
| 15***46 | Final Drive Group; -With Motor | 1 |
171-9410 Power Train Ar
| 09***18 | Nut (M6x1.0 Thd) | 4 |
| 12***01 | Rubber | 1 |
| 16***76 | Hinge | 2 |
179-2994 Sprocket Gp
| 09***18 | Nut (M6x1.0 Thd) | 4 |
| 16***76 | Hinge | 2 |
| 17***94 | Sprocket Group | 1 |
Service Equipment And Supplies
321-6606 Film Gp -Demolition Applications
| 32***06 | Film Group; -Demolition Applications | 1 |
247-7411 Film Gp -Operator Controls, Notice
| 24***11 | Film Group; -Operator Controls, Notice | 1 |
354-1028 Film Gp -Alt Pattern Control, Warning
| 35***28 | Film Group; -Alt Pattern Control, Warning | 1 |
247-7410 Film Gp -Operator Controls, Notice
| 24***10 | Film Group; -Operator Controls, Notice | 1 |
247-7418 Film Gp -Operator Controls, Notice
| 24***18 | Film Group; -Operator Controls, Notice | 1 |
247-7465 Film Gp -Hammer Control, Foot Switch
| 24***65 | Film Group; -Hammer Control, Foot Switch | 1 |
303-2787 Film Gp -Work Area Visual System, Rear
| 30***87 | Seal/O-Ring, Film Group; -Work Area Visual System, Rear, O Ring Seal, O-Ring | 1 |
298-4341 Film Gp -Smartboom
| 29***41 | Film Group; -Smartboom | 1 |
247-7490 Film Gp -Alt Pattern Control, Warning
| 24***90 | Film Group; -Alt Pattern Control, Warning | 1 |
298-4258 Film Gp -Fuel Transfer Pump
| 29***58 | Film Group; -Fuel Transfer Pump | 1 |
277-8253 Plate & Film Gp
| 27***53 | Plate & Film Group | 1 |
229-1744 Plate & Film Gp
| 22***44 | Plate & Film Group; -U.S. | 1 |
292-2662 Plate & Film Gp
| 29***62 | Plate & Film Group | 1 |
229-1742 Plate & Film Gp
| 22***42 | Plate & Film Group | 1 |
Undercarriage
297-9150 Adjustment Gp-Hydraulic Track
| 09***63 | Pin; (Cotter) | 1 |
| 11***71 | Bushing - Track | 56 |
| 11***72 | Bushing-Track Master | 1 |
179-2998 Adjustment Gp-Hydraulic Track
| 09***63 | Pin; (Cotter) | 1 |
| 11***71 | Bushing - Track | 53 |
| 11***72 | Bushing-Track Master | 1 |
232-0309 Frame Ar-Undercarriage
| 09***44 | Pin; (Cotter) | 1 |
| 11***53 | Link-Track Master | 1 |
| 11***54 | Link-Track Master | 1 |
234-7125 Frame Ar-Undercarriage -320d, Adj Gauge, H-Carbody
| 09***63 | Pin; (Cotter) | 1 |
| 15***80 | Seal; (Track) | 112 |
| 15***81 | Seal; (Track Master) | 2 |
248-5902 Frame Ar-Undercarriage -320d, Adj Gauge, H-Carbody
| 20***64 | Roller Group-Track-Single Flange | 18 |
| 24***02 | Frame Ar-Undercarriage; -320d, Adj Gauge, H-Carbody | 1 |
| 6Y***23 | Roller Group-Track Carrier | 4 |
229-1747 Frame Ar-Undercarriage
| 09***63 | Pin; (Cotter) | 1 |
| 15***80 | Seal; (Track) | 106 |
| 15***81 | Seal; (Track Master) | 2 |
338-7337 Frame Ar-Undercarriage
| 17***92 | Seal Group-Duo-Cone | 1 |
| 1M***97 | Ring-Sealing | 1 |
| 33***37 | Frame Ar-Undercarriage | 1 |
234-7130 Frame Ar-Undercarriage -320d, Adj Gauge, M-Carbody
| 20***64 | Roller Group-Track-Single Flange | 18 |
| 23***30 | Frame Ar-Undercarriage; -320d, Adj Gauge, M-Carbody | 1 |
| 6Y***23 | Roller Group-Track Carrier | 4 |
234-7126 Frame Ar-Undercarriage -320d, Adj Gauge, H-Carbody
| 23***26 | Frame Ar-Undercarriage; -320d, Adj Gauge, H-Carbody | 1 |
| 24***65 | Roller Group-Track-Single Flange | 18 |
| 6Y***23 | Roller Group-Track Carrier | 4 |
228-5515 Frame As-Undercarriage
| 09***79 | Ring-Sealing | 2 |
| 10***84 | Bolt-Socket Head; (M10x1.5x25-mm) | 5 |
| 22***15 | Frame As-Undercarriage | 1 |
228-5516 Frame As-Undercarriage
| 15***86 | Collar; (Track Roller) | 2 |
| 15***26 | Dowel | 2 |
| 17***13 | Ring-Toric | 2 |
234-7133 Frame Gp-Undercarriage
| 16***04 | Shoe-Track | 54 |
| 23***33 | Frame Group-Undercarriage | 1 |
| 3Q***73 | Link As-Track; -Grease Lubricated Track | 1 |
232-0307 Frame Gp-Undercarriage
| 15***86 | Collar; (Track Roller) | 2 |
| 15***96 | Ring; (Retaining) | 2 |
| 15***26 | Dowel | 1 |
234-7132 Frame Gp-Undercarriage
| 21***99 | Nut-Special | 1 |
| 21***01 | Plate | 1 |
| 21***02 | Plate | 1 |
234-7137 Frame Gp-Undercarriage
| 12***84 | Shoe-Track | 54 |
| 23***23 | Link As-Track; -Grease Lubricated Track | 1 |
| 23***37 | Frame Group-Undercarriage | 1 |
248-5903 Frame Gp-Undercarriage
| 16***04 | Shoe-Track | 57 |
| 20***53 | Link As-Track; -Grease Lubricated Track | 1 |
| 24***03 | Frame Group-Undercarriage | 1 |
228-5517 Guard Gp-Track Guide -Full Length
| 12***64 | Shoe; (Track) | 50 |
| 22***17 | Guard Group-Track Guide; -Full Length | 1 |
| 23***93 | Link As-Track; -Grease Lubricated Track | 1 |
236-8326 Guard Gp-Track Guide -Rear
| 23***26 | Guard Group-Track Guide; -Rear | 1 |
| 29***70 | Link As-Track; -Grease Lubricated Track | 1 |
| 6I***54 | Shoe-Track | 57 |
7y-2202 Guard Gp-Track Guide -Center
| 23***93 | Link As-Track; -Grease Lubricated Track | 1 |
| 30***48 | Bolt-Track; (M20x1.5x68-mm) | 200 |
| 6Y***26 | Shoe-Track | 50 |
184-5713 Guard Gp-Travel Motor -Heavy-Duty
| 18***13 | Guard Group-Travel Motor; -Heavy-Duty | 1 |
| 4I***39 | Core | 1 |
| 4I***62 | Cap | 1 |
184-5790 Guard Gp-Travel Motor
| 08***54 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 2 |
| 18***90 | Guard Group-Travel Motor | 1 |
| 4I***67 | Cap | 1 |
194-1240 Idler Gp-Front
| 08***56 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 19***40 | Idler Group-Front | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
248-7143 Idler Gp-Front
| 24***43 | Idler Group-Front; (Front) | 1 |
| 4I***39 | Core | 1 |
| 4I***62 | Cap | 1 |
194-1241 Idler Gp-Front
| 15***00 | Film-Warning; (High Pressure Cylinder) | 1 |
| 16***79 | Cap; (Accumulator) | 1 |
| 16***80 | Core | 1 |
113-2907 Idler Gp-Front
| 08***75 | Core | 1 |
| 08***76 | Cap | 1 |
| 08***77 | Seal | 1 |
115-3696 Idler Gp-Front
| 11***96 | Idler Group-Front; (Front) (C) | 1 |
| 14***06 | Accumulator Group-Hydraulic; -Charged | 1 |
| 4I***36 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
232-6223 Link As-Track -Grease Lubricated Track
| 09***75 | Pin, Roller | 1 |
| 09***81 | Plate, Slide | 1 |
| 09***82 | Plug, Tapered | 11 |
200-0253 Link As-Track -Grease Lubricated Track
| 09***75 | Pin, Roller | 1 |
| 09***81 | Plate, Slide | 1 |
| 09***82 | Plug, Tapered | 11 |
3q-6373 Link As-Track -Grease Lubricated Track
| 3Q***73 | Link As-Track; -Grease Lubricated Track | 1 |
299-8070 Link As-Track -Grease Lubricated Track
| 09***75 | Pin, Roller | 1 |
| 09***81 | Plate, Slide | 1 |
| 09***82 | Plug, Tapered | 7 |
236-8893 Link As-Track -Grease Lubricated Track
| 09***75 | Pin, Roller | 1 |
| 09***81 | Plate, Slide | 1 |
| 09***82 | Plug, Tapered | 13 |
194-1256 Roller Ar-Track & Carrier
| 13***26 | Bolt; (Shoulder) (M6x1x28.75mm) | 1 |
| 13***28 | Shim; (0.1-mm Thk) | 1 |
| 13***31 | Packing | 1 |
338-7339 Roller Ar-Track & Carrier
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 2 |
194-1250 Roller Ar-Track & Carrier
| 09***75 | Pin, Roller | 1 |
| 09***81 | Plate, Slide | 1 |
| 09***82 | Plug, Tapered | 7 |
6y-5323 Roller Gp-Track Carrier
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 4 |
| 14***90 | Elbow Group | 1 |
| 14***11 | Plug Group | 1 |
8e-5600 Roller Gp-Track Carrier
| 20***65 | Pump & Mounting Group; (Auxiliary) | 1 |
| 24***32 | Lines Group-Pump; -Medium Flow | 1 |
| 25***66 | Lines Group-Front; -Medium Flow | 1 |
247-0565 Roller Gp-Track-Single Flange
| 24***65 | Roller Group-Track-Single Flange | 1 |
| 25***37 | Wiring Group-Auxiliary Control; -System 17, Combined Fn, Med Pr | 1 |
| 25***62 | Lines Group-Pilot; -System 14, System 17 | 1 |
163-4143 Roller Gp-Track-Single Flange
| 16***43 | Roller Group-Track-Single Flange; (Track) (Single Flange) | 1 |
| 24***10 | Film Group; -Operator Controls, Notice | 1 |
| 25***95 | Fastener Group-Wiring Harness; -Joystick | 1 |
206-1264 Roller Gp-Track-Single Flange
| 20***64 | Roller Group-Track-Single Flange | 1 |
| 24***65 | Film Group; -Hammer Control, Foot Switch | 1 |
| 25***94 | Fastener Group-Wiring Harness; -Foot Switch | 1 |
194-1242 Spring Gp-Recoil
| 19***42 | Cutting Edge; 150 X 2100, Spring Group-Recoil | 1 |
| 24***78 | Lines Group-Front; -Boom Cylinder | 1 |
| 24***86 | Lines Group-Sensor; -Overload Warning Device | 1 |
149-3572 Track Adjuster & Recoil Gp
| 14***72 | Track Adjuster & Recoil Group | 1 |
| 23***99 | Hub | 1 |
| 3E***95 | Flange | 1 |
229-1864 Track Ar -2-Required
| 10***30 | Cover | 5 |
| 22***64 | Track Ar; -2-Required | 1 |
| 23***58 | Cover | 1 |
304-5291 Track Gp -2-Required
| 22***73 | Lines Group-Bucket Cylinder | 1 |
| 28***03 | Cylinder & Seal Group-Bucket | 1 |
| 30***91 | Track Group; -2-Required | 1 |
152-0920 Track Gp -2-Required
| 15***20 | Track Group; -2-Required | 1 |
| 4J***19 | Seal-Interface Between 3rd & Tilt Valve | 1 |
| 4J***67 | Packing,Preformed; Tube To Cylinder Uoc:Bsv,Bsx | 6 |
227-6513 Track Gp -2-Required
| 22***71 | Cylinder & Seal Group-Boom | 1 |
| 22***13 | Track Group; -2-Required | 1 |
| 25***51 | Lines Group-Boom Cylinder; -Lh | 1 |
236-8908 Track Gp -2-Required
| 23***08 | Track Group; -2-Required | 1 |
| 25***52 | Lines Group-Boom Cylinder; -Rh | 1 |
| 28***83 | Cylinder & Seal Group-Boom, Hexagon Flange Nut | 1 |
192-8079 Track Gp -2-Required
| 19***79 | Track Group; -2-Required | 1 |
| 4J***67 | Packing,Preformed; Tube To Cylinder Uoc:Bsv,Bsx | 4 |
| 5H***18 | Cover (Shipping & Storage) | 4 |
236-8907 Track Gp -2 Required
| 23***07 | Track Group; -2-Required | 1 |
| 25***51 | Lines Group-Boom Cylinder; -Lh | 1 |
| 28***83 | Cylinder & Seal Group-Boom, Hexagon Flange Nut | 1 |
232-4708 Track Gp
| 22***71 | Cylinder & Seal Group-Boom | 1 |
| 23***08 | Track Group | 1 |
| 25***52 | Lines Group-Boom Cylinder; -Rh | 1 |
Work Tools
250-6418 Adjuster Gp-Bucket -Cb-Family
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 5 |
| 24***93 | Receptacle As-Connector; (6-Pin) | 1 |
| 24***12 | Boot | 1 |
269-2633 Bucket & Adjuster Gp -General Purpose, Cb-Family
| 09***28 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 11***49 | Pedal Assem.; (L.H.) | 1 |
269-2639 Bucket As-General Purpose -Cb-Family
| 26***09 | Control Group-Handle; -Joystick, Rh | 1 |
| 26***39 | Bucket As-General Purpose; -Cb-Family | 1 |
| 29***30 | Valve Group-Pilot; -Joystick, Rh | 1 |
325D serial number reference
The PIN/serial number plate on a Cat 325D-family excavator is mounted on the right-side exterior of the operator's cab, below the window (on some earlier or alternate builds it may instead be on the cab frame near the operator's seat or right foot area). The plate shows the Product Identification Number (PIN); the first 3 characters are the machine's serial number prefix (identifying the specific model/configuration build lot), followed by a sequence number unique to that machine — record the full prefix plus sequence when ordering parts or looking up build specs, since the same '325D' nameplate covers several distinct prefixes across L, LN, and MH configurations.
| Prefix | Identifies | Notes |
|---|---|---|
| KBE | 325D and 325D L (base/long-undercarriage excavator) | Prefix KBE00001-and-up, 325D and 325D L; Cat C7 (C7 ACERT) engine family. |
| KDG | 325D and 325D L | KDG with CJM and DBH under 325D (Track). |
| SCR | 325D and 325D L | SCR to the Cat C7 engine. |
| DBH | 325D | |
| CJM | 325D and 325D L | Factory parts-manual XEBP8360-02 (Jan 2007) covers CJM-DAP-PEH for C7-engine 325D/325D L Track Type Excavator. |
| DAP | 325D and 325D L | Factory parts-manual XEBP8360-02 covers CJM-DAP-PEH. |
| PEH | 325D and 325D L | Factory parts-manual XEBP8360-02 covers CJM-DAP-PEH. |
| GPB | 325D | Service-repair manual GPB00001-and-up and 300-series excavator prefix reference. Verify exact build-lot dates with dealer. |
| AZP | 325D L | C7-engine 325D L. |
| T2S | 325D L | 325D L. |
| PKE | 325D LN (long/narrow undercarriage variant) | Prefix PKE00001-and-up for 325D LN configuration. Confirm with dealer. |
| A3R | 325D L | 325D L (USA-built); Prefix A3R. |
| RJK | 325D MH (material handler / demolition configuration) | Operation-and-maintenance manual for 325D MH excavator; RJK prefix for 325D-family USA-built units. Confirm with dealer. |
| C4H | 325D MH (material handler) | Prefix C4H00001-up for C7-engine 325D MH. Confirm with dealer. |
| EDF | M325D MH (wheel-type material handler based on 325D platform) | Service-repair manual EDF00001-01999 and EDF02000-and-up for M325D MH wheeled material handler; distinct model built on 325D base, separate from M325D L MH (prefix KAY). |
Frequently asked questions
What engine powers the Caterpillar 325D?
The 325D uses the Cat C7 engine with ACERT Technology, a turbocharged-aftercooled six-cylinder diesel rated at approximately 142 kW (190 hp) net and 152 kW (204 hp) gross flywheel power, built to meet U.S. EPA Tier 3/EU Stage IIIA emissions. It replaced the 3126B ATAAC HEUI engine used in the prior 325C, delivering roughly 12% more horsepower.
What is the operating weight of the Caterpillar 325D?
Operating weight is approximately 26.9 to 29.24 metric tons (about 59,300 to 64,460 lb) per Cat factory spec sheets, though this varies by configuration/series: undercarriage length (standard L vs. LN), track shoe width (600/700/800 mm options), boom-stick combination, and counterweight all shift the figure, so always confirm the specific build.
What replaced the Caterpillar 325D?
The 325D was succeeded by the Tier 4 Interim Cat 325F (produced roughly 2017-2019), which was in turn replaced by the current next-generation Cat 325 (2020-present), built around a smaller-displacement Cat C4.4 engine (around 172 hp) with Tier 4 Final/Stage V aftertreatment.
What 325D owners discuss
What engine does the Cat 325D actually run, and are the C7/C9 engine quirks people mention online interchangeable across configurations?
Community threads and dealer literature consistently tie the 325D family - including the L, LN, MH, and FM configurations - to the Cat C7 ACERT diesel, commonly cited around 152 kW (204 hp) net flywheel power, certified to Tier 3 emissions without a diesel particulate filter or regen cycle. The C9 ACERT is a distinct, larger displacement engine used one class up in the 330D/330D FM line, so C9-specific injector, tuning, or fuel-system troubleshooting threads don't apply to a 325D; mixing them up is a recurring mistake in used-equipment listings and forum searches. Owners and techs flag the C7 as a HEUI (hydraulically actuated electronic unit injector) design, which is unusually sensitive to fuel and oil contamination. Reported symptoms include gradual power loss traced to a worn HEUI pump shedding fine metal debris downstream into the injectors, oil dilution from leaking injectors (which thins oil enough to accelerate pump wear), rough running once warmed up, hard warm restarts, and boost fluctuation that owners often first blame on the turbo before tracing it to fuel pressure or injector wear. A cracked valve cover is another repeat complaint. Because pump/injector wear is interlinked and misdiagnosis is common, have your dealer verify the fuel system with proper diagnostic equipment before authorizing injector or HEUI pump replacement.
Why do 325Ds get a reputation for running hot, and what's the standard troubleshooting order techs use?
Overheating - both engine coolant and hydraulic oil, sometimes together - is one of the most repeated complaints tied to this model on equipment forums. The consensus troubleshooting order: separate the radiator and hydraulic oil cooler and pressure-wash both faces independently, since packed debris between the stacked coolers is very difficult to clear with them left assembled; check fan belt tension and wear; and on higher-ambient cooling packages, inspect the electrically controlled viscous fan clutch, since an aging clutch that stops spinning up properly can eventually let the fan work loose and damage the cowling/radiator. If the cooling package checks out, techs move to relief pressure settings on the digging functions and main relief, because a relief set too low lets oil bypass rather than do work, generating extra heat. Because a failing fan clutch risks physical damage to the cooling package and relief adjustments change system operating pressure, have your dealer verify before resetting reliefs or replacing the fan drive.
What hydraulic and swing symptoms should owners expect as a 325D accumulates hours, and what do they usually point to?
Slow, jerky, or hesitant response in boom, stick, and travel functions combined with visibly dirty return filters is the pattern most often linked in community discussion to worn spools in the main control valve or general internal contamination rather than a single failed component - the standard advice is to treat "jerky and hot" hydraulic behavior as a contamination signature and start with filter/oil condition before assuming a pump or valve failure. For swing-specific complaints (weak swing power, sudden swing lockup), the diagnostic split techs describe is: if the swing motor case stays cool, suspect the pump, control valve, or relief setting first; if the motor housing is hot, leaking, or noisy, suspect the swing motor or brake assembly itself. A stuck-open straight-travel solenoid is also mentioned as a less obvious cause of sluggish boom and travel response occurring together, since it can bleed off control pressure that affects pump flow.
Are final drive/travel motor failures common on this class of Cat excavator, and does that carry over to the 325D?
Yes - forum and shop consensus across the 320/325/330-size Cat excavator family, which shares final drive architecture, is that the hydraulic motor section and planetary reduction are separate assemblies joined by a coupler that is lubricated by the planetary's gear oil rather than the hydraulic motor's own oil. The widely repeated warning is that low gear oil accelerates wear on gear teeth, coupler splines, and bearings simultaneously, and if left unchecked can progress to a fully seized final drive. The other frequently cited failure mode is a leaking floating (duo-cone/mechanical face) seal between the sprocket and motor housing, which lets gear oil escape and lets contamination into the assembly. General hydraulic system contamination is also called out as a broader risk factor for these mid-size machines. Because a locked or failing final drive is a mobility and safety-relevant issue, have your dealer verify gear oil condition and seal integrity if you notice oil weeping at the sprocket hub or new whining/grinding from either travel motor.
What undercarriage wear pattern should owners and buyers expect, and how does it affect value?
Dealer and buyer-guide consensus is that undercarriage represents roughly half of a mid-size excavator's total wear/ownership cost, which is why experienced buyers and owners inspect track pads, rollers, idlers, and sprockets first - looking for oily residue or dents/holes in pads (signs of misuse or internal component failure), correct track sag/tension (too tight or too loose both promote accelerated wear), and uneven sprocket tooth wear suggesting misalignment. Cat's factory undercarriage is frequently cited by owners as among the best OEM quality available compared to competitor machines, but remaining wear life is highly duty-cycle and ground-condition dependent - general industry-quoted "heavy duty" wear life figures run in the several-thousand-hour range under favorable conditions - so any specific 325D's remaining undercarriage life varies significantly by application rather than following a fixed hour number tied to the meter reading alone.
What electrical and sensor issues come up most often, and how do techs typically approach a no-start or intermittent fault?
Recurring complaints center on battery terminal corrosion and connections loosened by daily operating vibration, often surfacing as a starter relay click with no crank, plus general wiring-harness and connector-pin corrosion at ground points and relays that mechanics diagnose by swapping relays one at a time and checking ground continuity before chasing more complex causes. On the sensor side, a failed coolant/engine temperature sensor is specifically flagged as a nuisance fault across this engine family - it can falsely report a cold engine, causing the control module to hold the engine in a low-rpm or derated mode even once the machine is fully warmed up. Standard Cat diagnostic-code prefixes (voltage above/below normal, signal error or dropout, current above/below normal) are used consistently across the electronic control system and read out through the onboard display or a Cat-compatible diagnostic tool to point techs at the specific sensor or circuit at fault. Because ECM-limited power and starting-circuit faults affect safe operation, have your dealer verify diagnostic codes with proper diagnostic software before replacing sensors or control modules on a guess.
What should a buyer specifically check when looking at a used Cat 325D?
Buyer-guide and forum consensus converges on a consistent checklist. Walk the undercarriage first, since it drives so much of ownership cost - check track pads for cracks, bends, or oily residue, verify correct track tension, and look for uneven sprocket/roller wear pointing to alignment issues. With the engine running, check all hydraulic lines, fittings, and cylinders (especially around boom, stick, and bucket) for leaks, and cycle every function while watching for jerky or hesitant movement that suggests contamination or internal wear. Listen for engine knocks or unusual ticking, and watch exhaust color - excess black, gray, or white smoke are all flagged as red flags. Start the machine cold and confirm the digital display and gauges illuminate without active fault codes, and cycle every joystick, switch, and pattern-changer function to confirm response. Inspect the cab and undercarriage frame for dents, rust, or structural damage, and always request maintenance and service records to confirm oil, filter, and hydraulic fluid change intervals were followed, since undocumented service history is treated by experienced buyers as a bargaining point and a risk flag rather than a dealbreaker on its own. Given the model's known sensitivity to fuel/oil contamination and hydraulic system wear, have your dealer verify engine and hydraulic condition with a proper inspection and fluid analysis before finalizing a purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Caterpillar 325D. Related factory variants of the same model family:
325D
Need a specific 325D part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.