Caterpillarmini hydraulic excavator(no series)
Caterpillar 303C CR
Maintenance schedule, common problems & OEM parts breakdown
The Cat 303C CR is a compact hydraulic excavator in Caterpillar's sub-4-tonne class, built 2006 to 2010 under serial prefix BXT, with a Japan-market AZS counterpart. It runs a Mitsubishi S3Q2, a naturally aspirated 3-cylinder diesel rated about 23 kW gross / 22 kW net (30-31 hp) at 2300 rpm, meeting EU Stage II emissions. Base operating weight runs 3,170 kg with canopy or 3,290 kg with cab, rising to 3,435 kg (canopy) and 3,555 kg (cab) with the optional extra counterweight. Cat offered it with an open canopy or a sealed, pressurized cab, a standard or long dipper stick, a straight or angle dozer blade, and factory one-way and two-way auxiliary hydraulic plumbing for hammers and augers. It replaced the earlier bare "303"/"303 CR" (2003-2006, DMA prefix, smaller Mitsubishi S3L2 engine) and was itself replaced by the 303E CR starting around 2011.
Across the CR line, the 303C CR sits below the 303.5C CR, which shares the same engine block in turbocharged S3Q2-T form for more power and a heavier chassis; the two are not interchangeable on major driveline parts despite the family resemblance. The move to the 303E CR dropped the Mitsubishi engine for a mechanical Cat C1.3 that met Tier 4 rules without a diesel particulate filter, trading fuel-system simplicity for aftertreatment avoidance. That combination makes the 303C CR attractive on the used market today: a simple, mechanically governed diesel with no DPF, no DEF, and no electronic aftertreatment to fail, in a size that still fits residential and utility jobs. Parts support leans on the shared CR-family undercarriage and hydraulic architecture, but final drives, rollers, and idlers vary by sub-model (C, CR, D, D CR), so confirm fitment against the machine's own serial plate before ordering.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 303C CR specifications
Engine
| Production era / generation | BXT-prefix 303C CR, built 2006-2010. Distinct from the earlier bare 303/"303 CR" (2003-2006, Mitsubishi S3L2) and from the current-generation "303 CR" (Cat C1.1 Turbo). Specs below apply only to this 2006-2010 build. |
| Engine model | Mitsubishi S3Q2, water-cooled 4-stroke, 3-cylinder diesel, naturally aspirated |
| Gross power | 23.2 kW (31.6 hp) at 2300 rpm |
| Net power | 22.0 kW (29.9 hp) at 2300 rpm, rated per ISO 9249 and 80/1269/EEC |
| Displacement | 1.9 L (116 cu in); bore 88 mm x stroke 103 mm |
| Cylinders | 3 |
| Emissions tier | Meets EU Stage II emission requirements |
Weights
| Weight basis | Figures include standard bucket, operator, full fuel tank and auxiliary lines. Actual weight varies with final configuration. |
| Operating weight, canopy (standard) | 3,170 kg (6,989 lb) |
| Operating weight, canopy (with 265 kg optional extra counterweight) | 3,435 kg (7,573 lb) |
| Operating weight, cab (standard) | 3,290 kg (7,253 lb) |
| Operating weight, cab (with 265 kg optional extra counterweight) | 3,555 kg (7,838 lb) |
| Ground pressure | Not published for this generation. Verify shoe-specific kPa/psi rating with a dealer before ground-bearing calculations. |
| Transport weight | Same as operating weight; no separate reduced shipping weight is documented for this model. |
Dimensions
| Transport length, standard stick | 4.74 m (15.6 ft) |
| Transport length, long stick | 4.77 m (15.6 ft) |
| Transport width | 1.55 m (5.1 ft) |
| Transport height | 2.5 m (8.2 ft) |
| Tail swing radius | 0.78 m (2.5 ft); adds about 0.1 m (4 in) with the optional extra counterweight fitted |
| Track shoe width | 300 mm (11.8 in), same for standard rubber or optional steel shoes |
| Ground clearance | 0.315 m (12.4 in) |
| Undercarriage length (track on ground) | 2.22 m (7.3 ft) |
Performance
| Max dig depth, standard stick | 2.91 m (9.6 ft) |
| Max dig depth, long stick | 3.2 m (10.5 ft) |
| Max reach at ground level, standard stick | 5.1 m (16.7 ft) |
| Max reach at ground level, long stick | 5.35 m (17.6 ft) |
| Max dump height, standard stick | 3.49 m (11.5 ft) |
| Max dump height, long stick | 3.61 m (11.8 ft) |
| Max cutting height, standard stick | 4.95 m (16.2 ft) |
| Max cutting height, long stick | 5.06 m (16.6 ft) |
| Swing speed | 9 rpm |
| Travel speed | High range 4.6 km/h (2.9 mph); low range 2.6 km/h (1.6 mph); automatic two-speed travel selection |
| Gradeability | 30 degrees maximum (about 58% grade) |
| Drawbar pull (max traction force) | 17.7 kN (3,979 lbf) at high travel speed; 33.4 kN (7,508 lbf) at low travel speed |
Forces
| Bucket digging force | 33.0 kN (7,419 lbf) |
| Stick digging force, standard stick | 18.9 kN (4,249 lbf) |
| Stick digging force, long stick | 16.9 kN (3,799 lbf) |
Service capacities (summary)
| Fuel tank | 45 L (11.9 US gal) |
| Hydraulic system, total (tank, lines and cylinders) | 65 L (17.2 US gal) |
| Hydraulic tank | 37 L (9.8 US gal) |
| Engine oil | 6 L (1.6 US gal) |
| Cooling system | 6 L (1.6 US gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
303C CR fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 6.06 L (1.6 US gal) | Cat DEO / DEO-ULS diesel engine oil, SAE 15W-40 for typical ambients; Cat Arctic DEO or a 10W-30 grade in cold climates. Engine is the Mitsubishi S3Q2 3-cylinder diesel used in this generation of 303C CR. |
| Cooling system | 6.06 L (1.6 US gal) | Cat ELC (Extended Life Coolant), premixed 50/50 glycol/water; Cat DEAC conventional heavy-duty antifreeze/coolant is an acceptable alternative. |
| Fuel tank | 45.0 L (11.9 US gal) | No. 2-D diesel fuel (ultra-low-sulfur grade for this emissions tier); No. 1-D or a winter-blend fuel in cold weather. |
| Hydraulic system total | 65.1 L (17.2 US gal) | Cat HYDO Advanced multi-viscosity hydraulic oil (10, 20, or 30 grade by ambient temperature) as first choice; Cat TDTO or Cat DEO acceptable second-choice oils. Cat BIO HYDO Advanced where an environmentally-acceptable fluid is required. |
| Hydraulic tank | 37.1 L (9.8 US gal) | Same fluid as hydraulic system total: Cat HYDO Advanced (viscosity grade by ambient), or Cat TDTO/Cat DEO second choice. |
| Final drive (each) | approx. 1.0 L (0.26 US gal) per side, filled/checked to a center level plug; actual fill varies with plug orientation - do not overfill or seals can leak | Cat TDTO (Trans/Drive Train Oil), SAE 10W or SAE 30 grade selected by ambient temperature. |
| Swing drive | Grease-lubricated swing gear and bearing on this machine class - no separate oil-fill reservoir; the hydraulic swing motor draws from the main hydraulic system above | Cat Multipurpose Grease (NLGI 2) applied through the swing bearing grease fittings at scheduled intervals. |
| Grease (spec only) | N/A - applied at pin, bucket linkage, and boom/stick grease fittings per lubrication schedule | Cat Multipurpose Grease (NLGI 2) for general chassis and linkage points; Cat Advanced 3Moly Grease where a moly-fortified grease is called for on heavily loaded pin joints. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 303C CR maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 3,000 h |
|
| Every 6,000 h |
|
Servicing the 303C CR beyond the schedule
Predictive Maintenance & Fluid Analysis
Sample S3Q2 engine oil and hydraulic oil on a schedule rather than a fixed date. The final drives and swing drive are this machine's known weak point, so gear-oil sampling catches face-seal wear before a housing runs dry. Watch hydraulic tank level daily; a slow drop with no visible puddle often means an internal seal at a travel motor or the swing motor. Track coolant condition too, since the small radiator and oil cooler foul quickly on fine debris, and a clogged core shows up first as a hot-running trend.
Corrective & Common Repairs
The most common failure on this generation is the floating face seal between sprocket and travel motor. Once it weeps, gear oil disappears and dirt migrates into the planetary hub, so treat repeated top-offs as a seal job, not routine maintenance. Hard starting usually traces to the glow plug preheat circuit or corroded starter wiring, not the mechanical injection pump; check relays and grounds before touching pump timing. A one-sided hydraulic fault, boom swing working but nothing else, points to the swing circuit rather than the main pump.
Overhaul & Rebuild Points
The naturally aspirated S3Q2 is a low-stress 3-cylinder block that usually reaches a full in-frame overhaul (liners, rings, bearings) well before the hydraulics need attention; use compression and blow-by trends, not hours alone, to time it. Rebuild both travel motors and final drives together once one shows face-seal wear, since the other side carries the same duty cycle. Swing bearing wear shows up as play at the upper-to-lower connection and backlash at the pinion. Reseal or exchange the main pump and control valve once swing and travel both feel soft under load.
Seasonal & Environment Servicing
This small, naturally aspirated diesel has a full glow plug preheat cycle, so cold starts below freezing need patience: let the preheat light clear, crank in short bursts, and use a block heater in sustained cold rather than long repeated cranks that wear the starter and glow plug circuit. In hot, dusty conditions, clean the radiator and oil cooler fins often; the compact cooling package has little margin. On rubber tracks, match tread pattern to the ground, since abrasive or rocky sites cut lugs and expose steel cord faster than turf or mud.
303C CR common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 146-7472 | Filter Element As-Air | Air intake service | Check fitment → |
| 146-7473 | Filter Element As-Air | Air intake service | Check fitment → |
| 284-5686 | Filter Element-Cab Air | Air intake service | Check fitment → |
| 217-2456 | Filter Element As-Oil | Hydraulic service | Check fitment → |
| 120-0664 | Filter-Engine Oil | Lubrication service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
303C CR fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| Engine oil pressure warning lamp (oil-can symbol, panel + buzzer) | Engine oil pressure below the safe minimum | Low engine oil level, worn oil pump, or a failed oil pressure switch/broken sensor wiring | Stop the engine immediately, check oil level on the dipstick, then check the oil pressure switch and its wiring before restarting |
| Engine coolant temperature warning (gauge needle in red zone + buzzer) | Engine coolant running hotter than normal operating range | Low coolant level, debris-clogged radiator screen/core, failed thermostat, or a loose/broken fan belt | Reduce load and idle down, shut down safely once cool enough, check coolant level and clean the radiator screen before restart |
| Glow plug / preheat indicator lamp | Normal status light for the cold-start preheat cycle; illuminates at key-on and should extinguish once preheat is complete | Abnormal behavior (light stays on, flashes, or never comes on) points to a failed preheat relay/timer, a corroded ground, or an open circuit at one or more glow plugs | Check the preheat relay/timer and its wiring in the console fuse/relay group, then bench-test each glow plug for continuity |
| Alternator/battery charge warning lamp (battery symbol) | Charging system not producing adequate voltage | Slipping or broken alternator belt, failed voltage regulator, or loose/corroded battery and alternator connections | Check belt tension and condition, inspect wiring and terminals, then bench-test alternator output |
| Air filter restriction indicator | Intake air restriction has exceeded the allowable limit | Clogged primary or secondary air filter element, or a collapsed/damaged intake hose | Inspect and clean or replace the air filter element, and check intake piping for damage or leaks |
| Fuel level low warning (gauge segment on main LCD display) | Fuel level approaching empty | Normal fuel consumption; an erratic or stuck reading points to a faulty fuel sender or its wiring | Refuel; if the gauge reads erratically with fuel in the tank, check the sender unit and wiring |
| Service/maintenance interval reminder (wrench symbol flashing on main display) | A scheduled service interval (for example the 500-hour interval) is due | Normal maintenance timer, not a machine fault | Perform the scheduled service, then clear the reminder using the display push-button reset sequence |
| Unexpected engine shutdown with no warning lamp sequence (fuel shutoff solenoid de-energized) | A safety switch in the oil pressure or coolant circuit has told the fuel shutoff solenoid to cut fuel, stopping the engine as if the key were turned off | Failed or miswired oil pressure or coolant switch, a corroded connector in that circuit, or a weak/sticking shutoff solenoid | Trace and test the oil pressure and coolant switches and their wiring at the shutoff solenoid circuit before replacing the solenoid |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
303C CR attachments & work tools
Buckets
The 303C CR is a 2006-2010 vintage mini excavator, about 3.55 t operating weight with cab, using a 40 mm bucket/dipper pin common to the 3-3.5 t mini excavator class. General-purpose buckets in this class run roughly 300-750 mm wide with capacities from about 0.06 to 0.16 cu m (0.08-0.2 cu yd). Heavy-duty buckets use thicker wear steel at similar widths with slightly less capacity for clay, mixed dirt and abrasive digging. Rock/severe-duty buckets trend toward the narrower end of that width range with reinforced sidewalls and bolt-on edges. Buckets mount pin-on as standard; a pin-grabber coupler (mechanical or hydraulic) is a common option that keeps the same pin/bushing interface.
Hydraulic hammers
The 303C CR is fitted from the factory with a 1-way auxiliary hammer line and quick-disconnect couplings, running off the machine's primary auxiliary circuit at about 245 bar / 60 lpm. Breakers sized for this 3-3.5 t carrier class typically fall around 150-270 kg working weight, 90-120 bar operating pressure and 25-50 lpm flow, delivering roughly 500 joules class impact energy. Staying within the carrier's rated auxiliary flow and pressure window matters — an oversized hammer stresses the boom and stick and hurts stability at full reach.
Quick couplers
Both mechanical pin-grab and hydraulic pin-grab quick couplers are built for the 303C CR, sized to the same roughly 38-40 mm pin interface as its pin-on bucket mount. Mechanical versions use a cylinder-actuated jaw plus an independent secondary safety lock; hydraulic versions add cab-operated locking for faster tool swaps. Wedge-style couplers are also used in this size class and hold full digging geometry without the pin wear that pin-grab designs can develop over time.
Thumbs/grapples
A pin-on hydraulic thumb around 760 mm (30 in) is the common fitment for the 303C CR, mounting off the factory bucket linkage pin and cylinder mount without stick modification. It runs off the machine's secondary (2-way) auxiliary circuit. Grapple rakes and similar hydro-mechanical work tools are offered for this excavator class through the same 2-way hookup; a continuously rotating grapple needs the optional extra auxiliary supply rather than the standard 2-way circuit.
Rippers
A single-shank pin-on ripper is built to mount on the 303C CR, sharing fitment with the wider 303/303.5/304 CR mini excavator family. It is a static tooth on a pin-on shank for light scarifying or breaking compacted or frozen ground ahead of the bucket, not a heavy-duty rock ripper.
Hydraulic-kit notes
Standard auxiliary plumbing on the 303C CR is a 1-way hammer line at about 245 bar / 60 lpm and a 2-way auger line at about 174 bar / 27 lpm, both with quick-connect fittings and load-sensing flow control as standard equipment. A second additional auxiliary supply is offered as an option to run continuous-rotation tools such as rotating grapples; it is not standard and must be ordered separately. No high-flow forestry-mulcher-class circuit is documented for this machine — its auxiliary system is sized for hammer/auger/thumb-class tools.
All 303C CR assemblies by section
Every catalogued assembly group for the Caterpillar 303C CR. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
270-1994 Air Cleaner Gp
| 09***77 | Valve (Evacuation) | 1 |
| 09***28 | Indicator-Air Filter Change; (Air Filter Service) | 1 |
| 14***72 | Filter Element As-Air; (Primary)(Primary) | 1 |
270-1992 Air Cleaner Gp
| 27***92 | Air Cleaner Group | 1 |
| 27***94 | Air Cleaner Group | 1 |
| 27***95 | Bracket | 1 |
276-1472 Extension Gp-Exhaust
| 09***85 | Clamp; (Hose) | 1 |
| 26***80 | Pipe As-Exhaust | 1 |
| 27***72 | Extension Group-Exhaust | 1 |
270-1985 Extension Gp-Exhaust
| 27***85 | Extension Group-Exhaust | 1 |
| 27***82 | Plate | 1 |
| 27***83 | Pipe-Exhaust | 1 |
270-1996 Lines Gp-Air
| 09***92 | Clamp, Hose | 4 |
| 09***93 | Clamp-Hose | 1 |
| 20***11 | Strap; (Cable) | 1 |
283-1299 Manifold Gp-Exhaust
| 09***24 | Stud | 3 |
| 19***83 | Bolt; (M8x1.25x20-mm)(M8x1.25x20mm) | 6 |
| 28***99 | Manifold Group-Exhaust | 1 |
283-1297 Manifold Gp-Inlet
| 09***00 | Washer; (1.5mm Thk) | 1 |
| 19***62 | Bolt; (M8x1.25x20-mm) | 9 |
| 27***36 | Bolt; (M6x1x20-mm) | 4 |
261-8062 Muffler & Converter
| 26***62 | Muffler & Converter | 1 |
270-1987 Muffler Gp
| 26***20 | Collar | 2 |
| 26***05 | Gasket | 3 |
| 27***87 | Muffler Group | 1 |
Basic Engine
283-1270 Camshaft Gp
| 09***28 | Key | 1 |
| 19***05 | Bolt As | 2 |
| 23***85 | Plate-Thrust | 1 |
283-1275 Cover Gp-Valve Mechanism
| 19***82 | Cap-Oil Filler; (Engine) | 1 |
| 27***59 | Bolt; (M8x1.25x40-mm) | 4 |
| 28***75 | Cover Group-Valve Mechanism | 1 |
283-1263 Crankshaft Gp
| 28***63 | Crankshaft Group | 1 |
| 28***64 | Bearing Set-Main; (Standard) | 1 |
| 28***65 | Cylinder Head,4 Cylinders; -Assembly, Cylinder Head,4 Cylinders; Assembly, Bearing Set-Main; (0.25-mm Us) | 1 |
283-1253 Cylinder Block Gp
| 11***15 | Seal As-Oil | 1 |
| 19***37 | Pin | 2 |
| 19***78 | Bolt; (M10x1.25x20-mm) | 7 |
283-1273 Cylinder Head As
| 10***47 | Guide-Valve | 3 |
| 21***75 | Cap | 5 |
| 27***89 | Guide-Valve | 3 |
320-0203 Cylinder Head Gp
| 19***05 | Bolt As | 2 |
| 19***62 | Bolt; (M8x1.25x20-mm) | 4 |
| 27***83 | Bolt | 14 |
283-1272 Cylinder Head Gp
| 19***05 | Bolt As | 2 |
| 19***62 | Bolt; (M8x1.25x20-mm) | 4 |
| 27***83 | Bolt | 14 |
276-0119 Drain Gp-Engine Oil -Ecology
| 27***19 | Drain Group-Engine Oil; -Ecology | 1 |
| 27***06 | Shutoff; (Engine Oil Drain) | 1 |
| 27***07 | Gasket | 1 |
283-1283 Flywheel Gp
| 09***01 | Washer; (3mm Thk) | 4 |
| 27***22 | Gear-Ring; (113-Teeth) | 1 |
| 28***83 | Flywheel Group | 1 |
280-3725 Gear Gp-Front
| 22***01 | Shaft | 1 |
| 22***02 | Plate | 1 |
| 22***12 | Bolt; (M10x1.25x20-mm) | 1 |
280-3724 Housing Gp-Front
| 13***50 | Gasket | 1 |
| 19***81 | Bolt; (M8x1.25x40-mm) | 1 |
| 27***04 | Plate | 1 |
302-4085 Mounting Gp-Engine
| 16***38 | Stop | 4 |
| 17***40 | Stop | 1 |
| 27***02 | Mount-Rubber | 4 |
297-6493 Mounting Gp-Engine
| 16***38 | Stop | 4 |
| 17***40 | Stop | 2 |
| 27***02 | Mount-Rubber | 4 |
270-1999 Mounting Gp-Engine
| 16***38 | Stop | 1 |
| 17***40 | Stop | 1 |
| 26***48 | Mount-Rubber | 2 |
267-1043 Mounting Gp-Engine
| 26***43 | Mounting Group-Engine | 1 |
| 26***44 | Support As; (Front, Rh) | 1 |
| 26***45 | Support As; (Front, Lh) | 1 |
275-3962 Mounting Gp-Engine
| 16***38 | Stop | 1 |
| 17***40 | Stop | 2 |
| 26***48 | Mount-Rubber | 2 |
276-2215 Mounting Gp-Starting Motor
| 12***39 | Bolt; (M10x1.25x25-mm) | 2 |
| 27***15 | Mounting Group-Starting Motor | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
283-1286 Pan Gp-Oil
| 09***82 | Gasket, Oil Drain | 1 |
| 10***67 | Plug | 1 |
| 13***32 | Plug; (Drain, Engine Oil) | 1 |
283-1255 Piston & Rod Gp
| 12***55 | Bolt-Connecting Rod | 2 |
| 12***56 | Nut | 2 |
| 23***82 | Set-Bearing; (Standard)(Standard) | 1 |
320-0204 Piston & Rod Gp
| 27***70 | Pin-Piston | 1 |
| 27***45 | Rod As-Connecting | 1 |
| 28***56 | Ring Set; (Standard) | 1 |
283-1281 Pulley Gp-Crankshaft
| 27***19 | Plate | 1 |
| 28***81 | Pulley Group-Crankshaft | 1 |
| 28***82 | Pulley-Crankshaft | 1 |
283-1279 Valve Mechanism Gp
| 10***82 | Spring | 6 |
| 10***72 | Tappet | 6 |
| 10***73 | Rod-Push | 6 |
Cooling System
283-1292 Cooler Gp-Engine Oil
| 09***61 | Clamp-Hose | 1 |
| 09***41 | Clamp, Hose; (Hose) | 3 |
| 19***43 | Plug | 2 |
286-0512 Cooling Ar-High Ambient Temp
| 27***27 | Cover Group-Access; -Rh | 1 |
| 28***13 | Cylinder Block,6 Cylinders; Assembly, Fan Group-Suction | 1 |
| 28***12 | Cooling Ar-High Ambient Temp | 1 |
283-1313 Fan Gp-Suction
| 23***07 | Pulley | 1 |
| 27***12 | Bolt | 4 |
| 28***88 | Fan; (7-Blade) | 1 |
286-2250 Fan Gp-Suction
| 27***39 | V-Belt; (Fan) | 1 |
| 28***88 | Fan; (7-Blade) | 1 |
| 28***38 | Pulley | 1 |
280-3730 Pump Gp-Water
| 09***75 | Bolt; (25-mm Long) | 2 |
| 10***66 | Thermostat | 1 |
| 19***56 | Bolt; (M8x1.25x45-mm) | 1 |
270-2004 Radiator Gp
| 09***90 | Clamp; (Hose) (26-39mm Id) | 2 |
| 14***36 | Tank As-Coolant; (Recovery) | 1 |
| 14***38 | Cap As; (Coolant Recovery) | 1 |
291-0778 Radiator Gp
| 13***58 | Grommet | 1 |
| 16***52 | Seal | 2 |
| 21***04 | Mount-Rubber | 2 |
283-5430 Radiator Gp
| 13***58 | Grommet | 3 |
| 16***52 | Seal | 2 |
| 21***04 | Mount-Rubber | 2 |
Electrical And Starting System
270-0148 Alarm Gp-Travel
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 13***75 | Terminal As | 2 |
| 16***39 | Alarm As | 1 |
294-7792 Alarm Gp-Travel
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 16***39 | Alarm As | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 1 |
270-0152 Alarm Gp-Travel
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 13***75 | Terminal As | 2 |
| 16***39 | Alarm As | 1 |
294-7790 Alarm Gp-Travel
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 16***39 | Alarm As | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 1 |
283-1309 Alternator Gp-Charging
266-6851 Battery & Wiring Gp
| 03***07 | Terminal-Ring; (0-Ga, 3/8-In Screw) | 1 |
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 8 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
283-1311 Glow Plug Gp
| 19***56 | Glow Plug | 3 |
| 28***11 | Glow Plug Group | 1 |
| 28***12 | Plate | 1 |
279-1967 Guard Gp-Alternator
| 27***67 | Guard Group-Alternator | 1 |
| 28***56 | Guard-Fan | 1 |
| 8T***00 | Bolt (M8x1.25x16mm); (M8x1.25x16-mm) | 2 |
279-1966 Guard Gp-Alternator
| 27***66 | Guard Group-Alternator | 1 |
| 29***53 | Guard-Fan | 1 |
| 8T***00 | Bolt (M8x1.25x16mm); (M8x1.25x16-mm) | 2 |
300-2799 Heater Gp-Jacket Water
| 27***87 | Gasket | 1 |
| 28***97 | Cord As, Camshaft | 1 |
| 30***99 | Heater Group-Jacket Water | 1 |
233-0099 Lamp Gp-Flood -Boom
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 14***72 | Lamp; (12-Volt, 55-Watt) | 1 |
| 23***99 | Lamp Group-Flood; -Boom | 1 |
266-6858 Lighting Ar-Flood -Boom
| 26***47 | Lighting Group-Flood; -Boom | 1 |
| 26***58 | Lighting Ar-Flood; -Boom | 1 |
| 26***59 | Wiring Group-Lighting; -Boom | 1 |
266-6843 Lighting Gp-Flood -Cab
| 14***72 | Lamp; (12-Volt, 55-Watt) | 1 |
| 19***52 | Lamp Group-Flood | 1 |
| 26***43 | Lighting Group-Flood; -Cab | 1 |
292-5739 Lighting Gp-Flood -Boom
| 23***99 | Lamp Group-Flood; -Boom | 1 |
| 29***39 | Lighting Group-Flood; -Boom | 1 |
| 29***40 | Plate | 1 |
266-6847 Lighting Gp-Flood -Boom
| 23***99 | Lamp Group-Flood; -Boom | 1 |
| 26***47 | Lighting Group-Flood; -Boom | 1 |
| 26***91 | Bracket As | 1 |
266-6844 Lighting Gp-Flood -Canopy
| 14***72 | Lamp; (12-Volt, 55-Watt) | 1 |
| 16***95 | Strap; (Cable) | 1 |
| 19***52 | Lamp Group-Flood | 1 |
283-5315 Panel Gp-Circuit Breaker
| 10***85 | Clip | 1 |
| 11***90 | Fuse; (10 Amp) | 7 |
| 11***91 | Fuse; (15-Ampere) | 5 |
280-3736 Starting Motor Gp-Electric
| 28***36 | Starting Motor Group-Electric | 1 |
| 28***84 | Starting Motor As | 1 |
9g-7641 Switch Gp-Start -Engine, Key
| 6V***62 | Screw-Machine; (8-32x0.31-In) | 4 |
| 7T***99 | Nut-Mounting; (1-32-Thd) | 1 |
| 9B***33 | Lockwasher; (Int'L Tooth) | 4 |
267-9950 Switch Gp-Start
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 24***07 | Receptacle As-Connector; (4-Pin) | 1 |
| 26***50 | Switch Group-Start; -Engine | 1 |
292-8773 Wiring Gp-Console -Cab
| 10***65 | Terminal; (Female) | 12 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 5 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
290-8331 Wiring Gp-Console -Power Angle
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 15***74 | Kit-Connecting Plug; (6-Pin)(Cat Electronic Display Harness) | 1 |
| 23***08 | Plug As-Connector; (4-Pin) | 1 |
282-9691 Wiring Gp-Console
| 10***65 | Terminal; (Female) | 12 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 5 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
340-3750 Wiring Gp-Console -Rh
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 23***11 | Plug As-Connector; (2-Pin) | 2 |
| 24***05 | Receptacle As-Connector; (2-Pin) | 1 |
267-4942 Wiring Gp-Console -Rh
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 26***26 | Switch As-Rocker; (Auxiliary Hydraulic, Enable) | 1 |
| 26***42 | Wiring Group-Console; -Rh | 1 |
273-7082 Wiring Gp-Engine -Refrigerant Compressor
| 18***58 | Suppressor-Arc | 1 |
| 27***82 | Wiring Group-Engine; -Refrigerant Compressor | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 3 |
266-6859 Wiring Gp-Lighting -Boom
| 10***29 | Hose; (60-cm) | 0 |
| 24***05 | Receptacle As-Connector; (2-Pin) | 1 |
| 26***59 | Wiring Group-Lighting; -Boom | 1 |
283-4678 Wiring Gp-Lighting -Warning Beacon, Power Recep
| 20***86 | Socket | 1 |
| 23***09 | Plug As-Connector; (12-Pin) | 1 |
| 26***34 | Seal-Connector | 1 |
277-9023 Wiring Gp-Window Washer
| 24***05 | Receptacle As-Connector; (2-Pin) | 1 |
| 27***23 | Wiring Group-Window Washer | 1 |
| 27***24 | Harness As-Switch; (Window Washer) | 1 |
Engine Arrangement
311-8445 Engine Ar-Primary
| 28***21 | Filler Group-Engine Oil | 1 |
| 28***24 | Housing Group-Front | 1 |
| 28***25 | Gear Group-Front | 1 |
263-5591 Engine Ar-Primary
| 26***91 | Engine Ar-Primary | 1 |
| 28***21 | Filler Group-Engine Oil | 1 |
| 28***24 | Housing Group-Front | 1 |
287-6713 Engine Ar-Primary
| 28***21 | Filler Group-Engine Oil | 1 |
| 28***24 | Housing Group-Front | 1 |
| 28***25 | Gear Group-Front | 1 |
263-5599 Installation Ar-Engine
| 26***99 | Installation Ar-Engine | 1 |
| 27***85 | Extension Group-Exhaust | 1 |
| 27***87 | Muffler Group | 1 |
Frame And Body
287-0011 C-Frame Gp-Power Angling
| 12***09 | Seal-Lip Type | 2 |
| 14***34 | Seal-Dust | 4 |
| 26***13 | Bearing-Sleeve | 2 |
270-9543 Counterweight Ar -Extra
| 19***86 | Film; (Safety) (To Right And Left Of Fuel Tank) | 2 |
| 26***46 | Counterweight Group | 1 |
| 27***43 | Counterweight Ar; -Extra | 1 |
265-8333 Counterweight Gp
| 08***99 | Washer; (22x60x9-mm Thk) | 2 |
| 25***11 | Cap | 2 |
| 26***33 | Counterweight Group | 1 |
318-3430 Counterweight Gp
| 08***99 | Washer; (22x60x9-mm Thk) | 2 |
| 25***11 | Cap | 2 |
| 26***53 | Counterweight As | 1 |
265-8346 Counterweight Gp
| 25***11 | Cap | 2 |
| 26***46 | Counterweight Group | 1 |
| 26***56 | Counterweight As | 1 |
276-9327 Cover Gp-Access -Rh
| 26***60 | Latch As | 1 |
| 26***63 | Stud-Ball | 1 |
| 26***96 | Cover As; (Rh) | 1 |
265-8491 Cover Gp-Access -Rh
| 12***78 | Locknut; (M6x1-Thd) | 8 |
| 26***60 | Latch As | 1 |
| 26***63 | Stud-Ball | 1 |
296-0240 Cover Gp-Access -Rh
| 26***60 | Latch As | 1 |
| 26***63 | Stud-Ball | 1 |
| 29***40 | Cover Group-Access; -Rh | 1 |
296-0248 Cover Gp-Access -Rh
| 19***48 | Grommet | 1 |
| 26***60 | Latch As | 1 |
| 26***63 | Stud-Ball | 1 |
200-4682 Cover Gp-Counterweight
| 19***61 | Cover | 1 |
| 20***82 | Cover Group-Counterweight | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
265-8335 Cover Gp-Fender
| 26***35 | Cover Group-Fender | 1 |
| 26***87 | Fender As; (Rh) | 1 |
| 33***19 | Fender Group | 1 |
339-1719 Fender Gp
| 22***94 | Lock As | 1 |
| 22***38 | Cam | 1 |
| 33***45 | Cover As-Fender | 1 |
285-7671 Fender Gp -Lh
| 22***91 | Latch As | 1 |
| 22***23 | Cam-Lock | 1 |
| 28***71 | Fender Group; -Lh | 1 |
276-9271 Fender Gp -Lh
| 22***91 | Latch As | 1 |
| 27***64 | Cover As-Fender | 1 |
| 27***67 | Plate | 1 |
265-8349 Firewall Gp
| 26***49 | Firewall Group | 1 |
| 26***95 | Plate As | 1 |
| 27***04 | Plate As | 1 |
266-4069 Frame Gp-Swing
| 09***83 | Shim (1.0 mm Thick) | 2 |
| 13***25 | Shim (T = 0.5 mm) | 1 |
| 14***41 | Shim; (1-mm Thk) | 4 |
267-8102 Frame Gp-Upper
| 19***03 | Seal-Lip Type | 4 |
| 26***50 | Bearing-Sleeve | 2 |
| 26***02 | Frame Group-Upper | 1 |
290-1007 Guard Gp-Bottom
| 27***30 | Cover | 1 |
| 27***33 | Cover | 1 |
| 27***34 | Cover | 1 |
318-3440 Guard Gp-Bottom
| 27***30 | Cover | 1 |
| 27***33 | Cover | 1 |
| 27***34 | Cover | 1 |
267-0526 Guard Gp-Bottom
| 26***26 | Guard Group-Bottom | 1 |
| 27***30 | Cover | 1 |
| 27***31 | Cover | 1 |
290-8287 Guard Gp-Cylinder -Power Angle
| 19***54 | Guide | 2 |
| 29***87 | Guard Group-Cylinder; -Power Angle | 1 |
| 29***88 | Cover As | 1 |
270-6501 Guard Gp-Cylinder -Boom
| 14***80 | Washer; (10.5x32x3.2-mm Thk) | 1 |
| 17***96 | Tube | 2 |
| 26***24 | Washer-Spring | 1 |
265-8338 Hood & Guard Gp
| 12***52 | Seal; (78-cm) | 0 |
| 14***01 | Grommet | 1 |
| 26***38 | Hood & Guard Group | 1 |
296-0228 Hood & Guard Gp
| 12***52 | Seal; (78-cm) | 0 |
| 14***01 | Grommet | 1 |
| 26***05 | Hinge As-Hood | 1 |
265-8490 Hood Gp
| 26***90 | Hood Group | 1 |
| 26***95 | Hood As | 1 |
| 27***77 | Latch As | 1 |
266-8795 Lines Gp-Grease
| 00***39 | Adapter-Pipe | 2 |
| 20***79 | Tube; (15-Dm) | 0 |
| 26***95 | Lines Group-Grease | 1 |
286-0561 Louver Gp -High Ambient
| 27***73 | Mount | 6 |
| 27***78 | Louver; (Center) | 1 |
| 28***17 | Louver; (Lower) | 1 |
281-1020 Stop Gp-Swing -Boom
| 28***20 | Stop Group-Swing; -Boom | 1 |
| 28***93 | Stop As | 1 |
| 8T***83 | Bolt (M12x1.75x40mm); (M12x1.75x40-mm) | 3 |
Fuel System
270-0145 Control Ar-Governor -Automatic Idle
| 27***45 | Control Ar-Governor; -Automatic Idle | 1 |
| 27***46 | Control Group-Governor; -Automatic Idle | 1 |
| 28***07 | Valve & Mtg Group-Pilot; -Travel | 1 |
270-0147 Control Ar-Governor -With Travel Alarm
| 26***29 | Control Group-Governor | 1 |
| 27***47 | Control Ar-Governor; -With Travel Alarm | 1 |
| 27***48 | Alarm Group-Travel | 1 |
294-7791 Control Ar-Governor -With Travel Alarm
| 26***29 | Control Group-Governor | 1 |
| 28***07 | Valve & Mtg Group-Pilot; -Travel | 1 |
| 29***91 | Control Ar-Governor; -With Travel Alarm | 1 |
269-5928 Control Ar-Governor
| 26***28 | Control Ar-Governor | 1 |
| 26***29 | Control Group-Governor | 1 |
| 28***06 | Valve & Mtg Group-Pilot; -Travel | 1 |
294-7803 Control Ar-Governor -Automatic Idle
| 28***07 | Valve & Mtg Group-Pilot; -Travel | 1 |
| 29***96 | Control Group-Governor; -Automatic Idle | 1 |
| 29***03 | Control Ar-Governor; -Automatic Idle | 1 |
270-0151 Control Ar-Governor -Automatic Idle, Travel Alarm
| 27***46 | Control Group-Governor; -Automatic Idle | 1 |
| 27***51 | Control Ar-Governor; -Automatic Idle, Travel Alarm | 1 |
| 27***52 | Alarm Group-Travel | 1 |
294-7789 Control Ar-Governor -Automatic Idle, Travel Alarm
| 28***07 | Valve & Mtg Group-Pilot; -Travel | 1 |
| 29***89 | Control Ar-Governor; -Automatic Idle, Travel Alarm | 1 |
| 29***90 | Alarm Group-Travel | 1 |
269-5929 Control Gp-Governor
| 09***43 | Pin-Cotter | 3 |
| 13***89 | Clip; (Ladder) | 1 |
| 15***97 | Knob As; (Engine Speed) | 1 |
294-7796 Control Gp-Governor -Automatic Idle
| 09***43 | Pin-Cotter | 3 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 13***89 | Clip; (Ladder) | 1 |
270-0146 Control Gp-Governor -Automatic Idle
| 09***43 | Pin-Cotter | 3 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 13***89 | Clip; (Ladder) | 1 |
144-9962 Filter Gp-Water Sep & Fuel
| 11***01 | Bowl As-Water Collection | 1 |
| 11***18 | Ring-Retaining | 1 |
| 11***19 | Nut | 1 |
283-1306 Lines Gp-Fuel
| 12***48 | Clamp | 2 |
| 12***49 | Clamp | 2 |
| 13***16 | Nut | 3 |
265-8348 Lines Gp-Fuel Filter
| 14***62 | Filter Group-Water Sep & Fuel | 1 |
| 14***05 | Plug As-Sto | 2 |
| 15***75 | Connector | 1 |
283-1302 Pump Gp-Fuel Injection
| 19***22 | Bolt As; (M8x1.25x22-mm) | 1 |
| 19***60 | Nut; (M8x1.25-Thd) | 1 |
| 19***78 | Bolt; (M10x1.25x20-mm) | 1 |
277-8147 Shutoff Gp-Manual -Engine
| 09***29 | Ring-Key | 1 |
| 19***83 | Spring | 1 |
| 27***66 | Lever As | 1 |
265-8341 Tank & Mtg Gp-Fuel
| 09***93 | Clamp-Hose | 1 |
| 1P***78 | Clamp; (Hose) | 2 |
| 26***41 | Tank & Mtg Group-Fuel | 1 |
Hydraulic System
227-8807 Accumulator Gp-Hydraulic -Uncharged
| 22***07 | Accumulator Group-Hydraulic; -Uncharged | 1 |
087-4454 Accumulator Gp-Hydraulic -Charged
| 08***54 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 08***75 | Core | 1 |
| 08***76 | Cap | 1 |
4i-1536 Accumulator Gp-Hydraulic -Charged
| 4I***36 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 4I***39 | Core | 1 |
| 4I***62 | Cap | 1 |
5i-8416 Accumulator Gp-Hydraulic -Charged
| 08***54 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 4I***67 | Cap | 1 |
| 5I***16 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
145-5106 Accumulator Gp-Hydraulic -Charged
| 14***06 | Accumulator Group-Hydraulic; -Charged | 1 |
| 15***00 | Film-Warning; (High Pressure Cylinder) | 1 |
087-4456 Accumulator Gp-Hydraulic -Charged
| 08***56 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 14***06 | Accumulator Group-Hydraulic; -Charged | 1 |
| 4I***36 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
269-4204 Control Ar-Auxiliary -2nd Auxiliary, Long Stick
| 26***42 | Wiring Group-Console; -Rh | 1 |
| 26***83 | Film Group; -Auxiliary | 1 |
| 26***99 | Fastener Group-Lines; -Boom | 1 |
269-4198 Control Ar-Auxiliary -2nd Auxiliary, Standard Stick
| 26***42 | Wiring Group-Console; -Rh | 1 |
| 26***83 | Film Group; -Auxiliary | 1 |
| 26***98 | Control Ar-Auxiliary; -2nd Auxiliary, Standard Stick | 1 |
280-2958 Control Ar-Auxiliary
| 26***95 | Lines Group-Auxiliary Hydraulic; -Boom | 1 |
| 26***88 | Lines Group-Front | 1 |
| 28***58 | Control Ar-Auxiliary | 1 |
269-4207 Control Ar-Auxiliary -2-Way
| 26***82 | Lines Group-Pilot; -Joystick, 2-Way | 1 |
| 26***22 | Valve Group-Selector; -2-Way | 1 |
| 26***07 | Control Ar-Auxiliary; -2-Way | 1 |
269-4196 Control Ar-Auxiliary -Swing Boom
| 26***59 | Lines Group-Swing Cylinder; -Boom | 1 |
| 26***96 | Control Ar-Auxiliary; -Swing Boom | 1 |
| 29***89 | Lines Group-Swing Cylinder; -Boom | 1 |
279-3957 Control Ar-Pilot Hydraulic -Standard
| 27***27 | Valve & Mtg Group-Pilot; -Boom Swing | 1 |
| 27***57 | Control Ar-Pilot Hydraulic; -Standard | 1 |
| 28***18 | Film Group; -Standard | 1 |
269-4206 Control Ar-Pilot Hydraulic -Standard
| 26***35 | Lines Group-Pilot; -Joystick | 1 |
| 26***06 | Control Ar-Pilot Hydraulic; -Standard | 1 |
| 26***08 | Lines Group-Pilot; -Standard | 1 |
326-8530 Valve Gp-Control -Angle
| 08***07 | Spring | 4 |
| 08***10 | Setscrew; (M10x21-mm) | 4 |
| 09***36 | Ring; (Retaining) | 4 |
266-6979 Cylinder Gp-Blade -Raise, Lower
| 09***09 | Seal-O-Ring (Id=74.40mm) | 1 |
| 09***10 | Seal-O-Ring (Id=79.40mm) | 1 |
| 14***86 | Ring | 1 |
286-6384 Cylinder Gp-Blade -Angle
| 09***07 | Seal-O-Ring; (Id=64.40mm) | 1 |
| 09***10 | Seal-O-Ring (Id=79.40mm) | 1 |
| 14***50 | Ring As | 1 |
284-0420 Cylinder Gp-Boom
| 09***09 | Seal-O-Ring (Id=74.40mm) | 2 |
| 09***10 | Seal-O-Ring (Id=79.40mm) | 1 |
| 14***86 | Ring | 1 |
273-7033 Cylinder Gp-Boom
| 09***09 | Seal-O-Ring (Id=74.40mm) | 2 |
| 09***10 | Seal-O-Ring (Id=79.40mm) | 1 |
| 14***86 | Ring | 1 |
277-8672 Cylinder Gp-Bucket
| 09***07 | Seal-O-Ring; (Id=64.40mm) | 1 |
| 09***08 | Seal-O-Ring | 1 |
| 14***69 | Ball | 1 |
266-6973 Cylinder Gp-Bucket
| 09***07 | Seal-O-Ring; (Id=64.40mm) | 1 |
| 09***08 | Seal-O-Ring | 1 |
| 14***69 | Ball | 1 |
284-0863 Cylinder Gp-Stick
| 09***09 | Seal-O-Ring (Id=74.40mm) | 1 |
| 09***10 | Seal-O-Ring (Id=79.40mm) | 1 |
| 14***86 | Ring | 1 |
285-5034 Cylinder Gp-Swing Boom
| 09***10 | Seal-O-Ring (Id=79.40mm) | 1 |
| 09***11 | Seal-O-Ring (Id=84.40mm) | 1 |
| 14***57 | Ring | 1 |
246-0192 Cylinder Gp-Tilt -Bucket
| 16***86 | Seal As-Buffer | 1 |
| 16***94 | Seal-U-Cup | 1 |
| 1H***39 | Packing,Preformed Cover Part Of Kit P/N 4j***80 | 1 |
280-8532 Drain Gp-Ecology -Engine, Hydraulic Tank
| 27***10 | Drain Group-Oil; -Ecology, Hydraulic Tank | 1 |
| 27***19 | Drain Group-Engine Oil; -Ecology | 1 |
| 28***32 | Drain Group-Ecology; -Engine, Hydraulic Tank | 1 |
280-8531 Drain Gp-Oil -Hydraulic Tank, Standard
| 27***09 | Drain Group-Oil; -Hydraulic Tank, Standard | 1 |
| 28***31 | Drain Group-Oil; -Hydraulic Tank, Standard | 1 |
274-6510 Drain Gp-Oil -Ecology, Hydraulic Tank
| 10***39 | Plug As-Drain; (Hydraulic Tank) | 1 |
| 14***15 | Connector As | 0 |
| 15***27 | Tube As-Drain | 1 |
274-6509 Drain Gp-Oil -Hydraulic Tank, Standard
| 14***15 | Connector As | 1 |
| 16***35 | Plug As | 1 |
| 27***05 | Bracket As | 1 |
284-0879 Drive Gp-Swing
| 28***55 | Planetary Group-Swing Drive | 1 |
| 28***56 | Motor Group-Swing | 1 |
| 28***79 | Drive Group-Swing | 1 |
269-4197 Fastener Gp-Lines -Stick
| 26***97 | Fastener Group-Lines; -Stick | 1 |
| 27***52 | Clamp | 4 |
| 7X***37 | Bolt-Plt; (M8 X 1.25 X 35) | 4 |
269-4199 Fastener Gp-Lines -Boom
| 09***94 | Clamp, Double | 4 |
| 26***03 | Plate As | 4 |
| 26***09 | Plate As | 2 |
227-0620 Gauge Gp-Sight -Hydraulic Oil Level
| 09***19 | Seal-O-Ring (Id=15.80mm) | 4 |
| 22***20 | Gauge Group-Sight; -Hydraulic Oil Level | 1 |
| 23***57 | Pipe | 1 |
264-8377 Hydraulic Ar
| 26***77 | Hydraulic Ar | 1 |
| 26***43 | Tank & Mtg Group-Hydraulic | 1 |
| 26***47 | Pump & Mtg Group-Main Hydraulic | 1 |
269-4190 Lines Ar-Boom
| 26***64 | Lines Group-Front; -Boom Cylinder | 1 |
| 26***90 | Lines Ar-Boom | 1 |
| 29***85 | Lines Group-Front; -Boom Cylinder | 1 |
269-4191 Lines Ar-Boom
| 26***91 | Lines Ar-Boom | 1 |
| 26***92 | Lines Group-Boom Check Valve | 1 |
| 27***33 | Cylinder Group-Boom | 1 |
310-6186 Lines Ar-Boom -Check Valve
| 31***86 | Lines Ar-Boom; -Check Valve | 1 |
| 31***87 | Lines Group-Boom Check Valve | 1 |
277-9389 Lines Ar-Bucket -Long Stick
| 26***79 | Lines Group-Bucket; -Long Stick | 1 |
| 27***72 | Cylinder Group-Bucket | 1 |
| 27***89 | Lines Ar-Bucket; -Long Stick | 1 |
277-9391 Lines Ar-Bucket
| 26***73 | Cylinder Group-Bucket | 1 |
| 27***68 | Lines Group-Bucket; -2nd Auxiliary, Long Stick | 1 |
| 27***91 | Lines Ar-Bucket | 1 |
277-9388 Lines Ar-Bucket
| 26***78 | Lines Group-Bucket | 1 |
| 27***72 | Cylinder Group-Bucket | 1 |
| 27***88 | Lines Ar-Bucket | 1 |
277-9390 Lines Ar-Bucket
| 26***73 | Cylinder Group-Bucket | 1 |
| 27***67 | Lines Group-Bucket; -2nd Auxiliary | 1 |
| 27***90 | Lines Ar-Bucket | 1 |
269-4195 Lines Gp-Auxiliary Hydraulic -Long Stick
| 15***17 | Cap-Dust | 1 |
| 15***18 | Cap-Dust | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
292-8308 Lines Gp-Auxiliary Hydraulic -2nd Auxiliary, Standard Stick
| 15***96 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
| 15***97 | Fitting As; (Quick Disconnect, Female) | 1 |
| 16***60 | Cap-Dust | 1 |
269-4201 Lines Gp-Auxiliary Hydraulic -2nd Auxiliary, Boom
| 26***01 | Lines Group-Auxiliary Hydraulic; -2nd Auxiliary, Boom | 1 |
| 28***28 | Tube As | 1 |
| 28***29 | Tube As | 1 |
292-8310 Lines Gp-Auxiliary Hydraulic -2nd Auxiliary, Long Stick
| 15***96 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
| 15***97 | Fitting As; (Quick Disconnect, Female) | 1 |
| 16***60 | Cap-Dust | 1 |
269-4202 Lines Gp-Auxiliary Hydraulic -2nd Auxiliary, Standard Stick
| 15***96 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
| 15***97 | Fitting As; (Quick Disconnect, Female) | 1 |
| 16***60 | Cap-Dust | 1 |
269-4194 Lines Gp-Auxiliary Hydraulic -Standard Stick
| 15***17 | Cap-Dust | 1 |
| 15***18 | Cap-Dust | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
269-4203 Lines Gp-Auxiliary Hydraulic -2nd Auxiliary, Long Stick
| 15***96 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
| 15***97 | Fitting As; (Quick Disconnect, Female) | 1 |
| 16***60 | Cap-Dust | 1 |
269-3795 Lines Gp-Auxiliary Hydraulic -Boom
| 09***90 | Clamp, Single | 8 |
| 26***95 | Lines Group-Auxiliary Hydraulic; -Boom | 1 |
| 28***20 | Tube As | 1 |
268-5250 Lines Gp-Blade -Raise, Lower
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 3 |
| 26***77 | Hose As | 1 |
292-8290 Lines Gp-Blade -Raise, Lower
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 3 |
| 26***79 | Cover | 1 |
280-7609 Lines Gp-Blade -Angle
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 3 |
| 28***09 | Lines Group-Blade; -Angle | 1 |
292-8288 Lines Gp-Boom Check Valve
| 09***90 | Clamp, Single | 1 |
| 14***28 | Connector Assem. | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
310-6187 Lines Gp-Boom Check Valve
| 09***90 | Clamp, Single | 1 |
| 14***28 | Connector Assem. | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
269-4192 Lines Gp-Boom Check Valve
| 09***90 | Clamp, Single | 1 |
| 14***28 | Connector Assem. | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
275-9068 Lines Gp-Bucket -2nd Auxiliary, Long Stick
| 14***18 | Connector As | 2 |
| 14***33 | Tee As-Orfs; (1 1/16-12 Thd) | 2 |
| 15***43 | Connector As. | 2 |
269-3778 Lines Gp-Bucket
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 26***78 | Lines Group-Bucket | 1 |
| 28***26 | Tube As | 1 |
269-3779 Lines Gp-Bucket -Long Stick
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 26***79 | Lines Group-Bucket; -Long Stick | 1 |
| 28***26 | Tube As | 1 |
275-9067 Lines Gp-Bucket -2nd Auxiliary
| 14***18 | Connector As | 2 |
| 14***33 | Tee As-Orfs; (1 1/16-12 Thd) | 2 |
| 15***43 | Connector As. | 2 |
252-6793 Lines Gp-Bucket Cylinder
| 14***25 | Connector | 1 |
| 15***41 | Block | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
292-8294 Lines Gp-Front
| 13***13 | Handle | 1 |
| 13***14 | Bolt; (M5x0.8x10mm) | 1 |
| 13***15 | Plate | 1 |
292-8283 Lines Gp-Front
| 13***07 | Strap; (Cable) | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 2 |
269-3764 Lines Gp-Front -Boom Cylinder
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 3 |
| 16***69 | Adapter; (Str Thd (-6) Orfs/0) | 1 |
| 26***83 | Hose As | 1 |
292-8285 Lines Gp-Front -Boom Cylinder
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 3 |
| 16***69 | Adapter; (Str Thd (-6) Orfs/0) | 1 |
| 27***37 | Strap-Cable; (Green) | 1 |
269-4188 Lines Gp-Front
| 13***13 | Handle | 1 |
| 13***14 | Bolt; (M5x0.8x10mm) | 1 |
| 13***15 | Plate | 1 |
269-3763 Lines Gp-Front
| 13***07 | Strap; (Cable) | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 2 |
269-3761 Lines Gp-Hydraulic Pump
| 11***49 | Fitting As; (Quick Disconnect) | 1 |
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
269-4209 Lines Gp-Pilot -2-Way
| 08***56 | 90 Degrees Elbow | 1 |
| 08***56 | Accumulator Group-Hydraulic; -Charged-Pilot Oil | 1 |
| 09***79 | Tape-Color; (White) | 1 |
269-5940 Lines Gp-Pilot
| 09***79 | Tape-Color; (White) | 1 |
| 14***16 | Connector Group | 1 |
| 14***51 | Elbow Group | 1 |
280-7611 Lines Gp-Pilot
| 09***88 | Clamp; (Hose) | 3 |
| 09***90 | Clamp; (Hose) (26-39mm Id) | 2 |
| 09***01 | Seal-O-Ring (Id=39.40mm) | 1 |
269-4208 Lines Gp-Pilot -Standard
| 09***80 | Tape - Color; (Blue) | 1 |
| 09***81 | Tape-Color; (Orange) | 1 |
| 14***09 | Rubber | 1 |
266-8135 Lines Gp-Pilot -Joystick
| 09***79 | Tape-Color; (White) | 4 |
| 14***37 | Connector | 1 |
| 14***25 | Connector As. | 8 |
267-3282 Lines Gp-Pilot -Joystick, 2-Way
| 09***79 | Tape-Color; (White) | 4 |
| 14***37 | Connector | 1 |
| 14***25 | Connector As. | 8 |
280-2959 Lines Gp-Pilot -Auxiliary
| 09***88 | Clamp; (Hose) | 3 |
| 09***90 | Clamp; (Hose) (26-39mm Id) | 2 |
| 09***01 | Seal-O-Ring (Id=39.40mm) | 1 |
269-3760 Lines Gp-Return
| 09***88 | Clamp; (Hose) | 3 |
| 09***90 | Clamp; (Hose) (26-39mm Id) | 2 |
| 09***01 | Seal-O-Ring (Id=39.40mm) | 1 |
283-7498 Lines Gp-Return
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 26***44 | Tube As | 2 |
| 28***98 | Lines Group-Return | 1 |
269-3772 Lines Gp-Stick
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
| 16***69 | Adapter; (Str Thd (-6) Orfs/0) | 1 |
292-8286 Lines Gp-Stick -Auxiliary
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 4 |
| 14***35 | Tee, -6 Orb / Orfs | 1 |
269-3759 Lines Gp-Swing Cylinder -Boom
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
| 16***69 | Adapter; (Str Thd (-6) Orfs/0) | 1 |
292-8306 Lines Gp-Swing Cylinder -2nd Auxiliary
| 09***35 | Connector | 1 |
| 14***37 | Connector | 1 |
| 14***10 | Adapter As | 1 |
292-8289 Lines Gp-Swing Cylinder -Boom
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 1 |
| 14***71 | Elbow, 45, -6 Orfs Fm Swivel | 1 |
269-4200 Lines Gp-Swing Cylinder -2nd Auxiliary
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 4 |
| 14***35 | Tee, -6 Orb / Orfs | 1 |
280-7610 Lines Gp-Swing Motor
| 14***10 | Adapter As | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 4 |
| 14***38 | Adapter, -6 Orb / Orfs X-Long | 1 |
292-8291 Lines Gp-Swing Motor
| 14***18 | Connector As | 4 |
| 14***25 | Connector As. | 2 |
| 14***63 | Elbow Group | 4 |
268-5253 Lines Gp-Swing Motor
| 14***10 | Adapter As | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 4 |
| 14***38 | Adapter, -6 Orb / Orfs X-Long | 1 |
280-7621 Lines Gp-Travel Motor
| 09***19 | Seal-O-Ring (Id=15.80mm) | 2 |
| 09***78 | Seal-O-Ring (Id=9.80mm) | 1 |
| 09***79 | Seal-O-Ring (Id=10.80mm) | 2 |
292-8292 Lines Gp-Travel Motor
| 28***79 | Drive Group-Swing | 1 |
| 29***92 | Lines Group-Travel Motor | 1 |
| 8T***93 | Bolt-Plt; (M16 X 2.0 X 50) | 4 |
268-5251 Lines Gp-Travel Motor
| 14***18 | Connector As | 4 |
| 14***25 | Connector As. | 4 |
| 14***63 | Elbow Group | 4 |
274-4199 Manifold Gp-Control
| 27***99 | Manifold Group-Control; -Hydraulic Lockout, Speed Select | 1 |
| 28***57 | Gear | 1 |
| 28***58 | Gear | 1 |
265-8753 Motor & Mtg Gp-Swing
| 12***39 | Bolt; (M10x1.25x25-mm) | 2 |
| 12***47 | Bolt; (M10x1.25x40-mm) | 5 |
| 19***03 | Bolt; (M12x1.75x16-mm) | 3 |
280-2356 Motor Gp-Swing
| 28***56 | Motor Group-Swing | 1 |
280-2355 Planetary Gp-Swing Drive
| 09***71 | Seal-O-Ring (Id=2.80mm) | 1 |
| 09***75 | Seal - O-Ring (7.80 mm Id) | 7 |
| 09***82 | Seal-O-Ring (Id=13.80mm) | 1 |
266-6947 Pump & Mtg Gp-Main Hydraulic
| 26***47 | Pump & Mtg Group-Main Hydraulic | 1 |
| 33***55 | Spool; (Boom) | 1 |
| 33***56 | Spool; (Stick) | 1 |
279-4699 Pump Gp-Gear -Pilot
| 09***23 | Seal-O-Ring (Id=79.60mm) | 1 |
| 09***10 | Seal-O-Ring (Id=79.40mm) | 1 |
| 09***13 | Seal-O-Ring; (Id=94.40mm) | 1 |
284-8038 Pump Gp-Piston & Gear
| 09***29 | Ring; (Retaining) | 1 |
| 09***66 | Plug, Tapered | 5 |
| 09***23 | Seal-O-Ring (Id=79.60mm) | 1 |
333-9454 Spool Gp-Control Valve
| 09***37 | Valve As-Check | 1 |
| 09***17 | Seal-O-Ring (Id=114.40mm) | 2 |
| 1P***78 | Clamp; (Hose) | 1 |
266-6836 Swivel Gp
| 26***36 | Swivel Group | 1 |
| 28***02 | Valve Group-Bank; -Main Control | 1 |
| 28***45 | Belt Tensioner; Fan Drive, Support As | 1 |
191-7516 Swivel Gp
| 19***16 | Swivel Group | 1 |
| 27***10 | Tank & Filter Group-Hydraulic | 1 |
| 7X***29 | Washer; (11x25x3-mm Thk) | 4 |
276-9310 Tank & Filter Gp-Hydraulic
| 27***10 | Tank & Filter Group-Hydraulic | 1 |
| 28***42 | Valve Group-Main Control | 1 |
| 28***45 | Belt Tensioner; Fan Drive, Support As | 1 |
265-8343 Tank & Mtg Gp-Hydraulic
| 14***68 | Elbow Group | 1 |
| 15***65 | Elbow; (Spl) | 2 |
| 26***43 | Tank & Mtg Group-Hydraulic | 1 |
266-8145 Valve & Mtg Gp-Bank
| 14***25 | Connector As. | 2 |
| 14***68 | Elbow Group | 2 |
| 15***65 | Elbow; (Spl) | 2 |
280-7613 Valve & Mtg Gp-Main Control
| 28***13 | Valve & Mtg Group-Main Control | 1 |
| 28***39 | Valve Group-Pilot; -Travel | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
287-3306 Valve & Mtg Gp-Pilot -Travel
| 10***81 | Plug Assem. | 1 |
| 18***55 | Valve As-Manual; (Shutoff)(Work Tool) | 5 |
| 20***56 | Nut | 8 |
287-3307 Valve & Mtg Gp-Pilot -Travel
| 15***85 | Seal | 1 |
| 15***55 | Plug | 1 |
| 15***67 | Seal-O-Ring | 1 |
282-9694 Valve & Mtg Gp-Pilot -Auxiliary, Boom Swing
| 26***23 | Valve Group-Pilot; -Travel | 1 |
| 28***94 | Valve & Mtg Group-Pilot; -Auxiliary, Boom Swing | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
278-0827 Valve & Mtg Gp-Pilot -Boom Swing
| 27***27 | Valve & Mtg Group-Pilot; -Boom Swing | 1 |
| 33***20 | Valve Group-Pilot; -Travel | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
283-3202 Valve Gp-Bank -Main Control
| 15***46 | Seal | 2 |
| 25***71 | Seal | 1 |
| 27***96 | Plate | 1 |
281-2329 Valve Gp-Control -Blade
| 25***71 | Seal | 1 |
| 27***96 | Plate | 1 |
| 28***29 | Valve Group-Control; -Blade | 1 |
281-2326 Valve Gp-Control -Inlet
| 15***55 | Plug | 1 |
| 15***67 | Seal-O-Ring | 1 |
| 25***71 | Seal | 1 |
328-5659 Valve Gp-Control -Boom Swing
| 08***07 | Spring | 4 |
| 08***10 | Setscrew; (M10x21-mm) | 4 |
| 09***36 | Ring; (Retaining) | 4 |
281-2336 Valve Gp-Control -Outlet
| 08***07 | Spring | 4 |
| 08***10 | Setscrew; (M10x21-mm) | 4 |
| 09***36 | Ring; (Retaining) | 4 |
281-2332 Valve Gp-Control -Bucket
| 15***55 | Plug | 1 |
| 27***86 | Valve Group-Relief; (Inlet) | 1 |
| 27***10 | Plug As | 1 |
329-8369 Valve Gp-Control -Auxiliary
| 09***60 | Setscrew-Socket; (M6x1x6-mm) | 1 |
| 09***78 | Seal-O-Ring (Id=9.80mm) | 2 |
| 09***85 | Seal- -O-Ring (17.80 mm Id) | 2 |
281-2334 Valve Gp-Control -Swing
| 09***60 | Setscrew-Socket; (M6x1x6-mm) | 1 |
| 09***78 | Seal-O-Ring (Id=9.80mm) | 2 |
| 09***35 | Sleeve | 2 |
306-5976 Valve Gp-Control -Travel
| 26***99 | Valve Group-Solenoid; -Auxiliary, Boom Swing | 2 |
| 30***76 | Valve Group-Control; -Travel | 1 |
| 7I***72 | Bolt; (M5x0.8x12-mm) | 4 |
281-2327 Valve Gp-Control -Travel
| 25***71 | Seal | 1 |
| 27***96 | Plate | 1 |
| 28***27 | Valve Group-Control; -Travel | 1 |
306-5977 Valve Gp-Control -Travel
| 08***07 | Spring | 4 |
| 08***10 | Setscrew; (M10x21-mm) | 4 |
| 09***36 | Ring; (Retaining) | 4 |
281-2333 Valve Gp-Control -Stick
| 21***13 | Seal-O-Ring | 1 |
| 21***14 | Seal-O-Ring | 1 |
| 22***17 | Manifold | 1 |
281-2335 Valve Gp-Control -Boom Swing
| 09***76 | Seal | 4 |
| 09***86 | Seal - O-Ring (19.80 mm Id) | 4 |
| 09***28 | Sleeve | 4 |
281-2328 Valve Gp-Control -Travel
| 25***71 | Seal | 1 |
| 27***96 | Plate | 1 |
| 28***28 | Valve Group-Control; -Travel | 1 |
281-2331 Valve Gp-Control -Auxiliary
| 25***71 | Seal | 1 |
| 28***31 | Valve Group-Control; -Auxiliary | 1 |
| 28***60 | Seal | 1 |
281-2330 Valve Gp-Control -Boom
| 25***71 | Seal | 1 |
| 27***96 | Plate | 1 |
| 28***30 | Valve Group-Control; -Boom | 1 |
274-4203 Valve Gp-Diverter -Swing Boom, Work Tool
| 08***07 | Spring | 4 |
| 08***10 | Setscrew; (M10x21-mm) | 4 |
| 09***73 | Bolt; (Socket Head) (M12x1.75x60mm) | 2 |
315-5816 Valve Gp-Main Control -Angle Blade
| 08***07 | Spring | 4 |
| 08***10 | Setscrew; (M10x21-mm) | 4 |
| 09***73 | Bolt; (Socket Head) (M12x1.75x60mm) | 2 |
291-1668 Valve Gp-Manifold & Reducing -Inlet
| 09***75 | Seal - O-Ring (7.80 mm Id) | 1 |
| 09***84 | Seal-O-Ring (Id=15.80mm) | 1 |
| 27***04 | Orifice | 1 |
295-6473 Valve Gp-Pilot -Travel
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 4 |
| 26***45 | Elbow | 1 |
| 26***46 | Elbow As | 4 |
267-0424 Manifold & Solenoid Gp-Control -Auxiliary, Boom Swing
| 09***80 | Pin | 1 |
| 09***74 | Seal-O-Ring (Id=6.8mm); (Id=6.80mm) | 2 |
| 09***79 | Seal-O-Ring (Id=10.80mm) | 6 |
320-6540 Valve Gp-Pilot -Blade Control
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
267-4432 Valve Gp-Pilot -Travel
| 26***32 | Valve Group-Pilot; -Travel | 1 |
| 27***13 | Retainer | 1 |
| 27***14 | Ball | 1 |
267-0423 Valve Gp-Pilot -Travel
| 09***28 | Seal-O-Ring | 4 |
| 26***23 | Valve Group-Pilot; -Travel | 1 |
| 27***32 | Valve As-Relief; (Line)(Thumb) | 2 |
330-4621 Valve Gp-Pilot -Travel
| 26***69 | Frame Group-Swing | 1 |
| 26***87 | Boom Group | 1 |
| 27***01 | Guard Group-Cylinder; -Boom | 1 |
330-4620 Valve Gp-Pilot -Travel
| 16***81 | Valve Group-Solenoid; -Blade | 2 |
| 29***52 | Block | 1 |
| 33***20 | Valve Group-Pilot; -Travel | 1 |
267-0420 Valve Gp-Pilot -Joystick
| 09***82 | Seal-O-Ring (Id=13.80mm) | 1 |
| 09***85 | Seal- -O-Ring (17.80 mm Id) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
191-1392 Valve Gp-Pilot
| 09***75 | Seal - O-Ring (7.80 mm Id) | 4 |
| 19***92 | Valve Group-Pilot; -Blade Control | 1 |
| 27***03 | Seal-O-Ring | 1 |
295-6474 Valve Gp-Pilot -Travel
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
332-1292 Valve Gp-Pump Control -303c Cr
| 24***75 | Bearing | 2 |
| 28***13 | Bracket As-Mounting | 1 |
| 33***92 | Valve Group-Pump Control; -303c Cr | 1 |
279-4712 Valve Gp-Pump Control
| 09***30 | Seal-Lip Type | 2 |
| 17***94 | Shim; (0.5-mm Thk) | 2 |
| 17***95 | Shim; (1-mm Thk) | 4 |
288-0848 Valve Gp-Relief -Thumb
| 27***37 | Linkage Group-Bucket; -With Lifting Eye | 1 |
| 28***48 | Valve Group-Relief; -Thumb | 1 |
280-2366 Valve Gp-Relief -Swing
| 27***78 | Linkage Group-Bucket | 1 |
| 28***66 | Valve Group-Relief; -Swing | 1 |
268-3622 Valve Gp-Selector -2-Way
| 09***29 | Seal-Lip Type | 6 |
| 09***68 | Pin-Cotter | 2 |
| 17***94 | Shim; (0.5-mm Thk) | 7 |
268-3578 Valve Gp-Selector -2-Way
| 09***29 | Seal-Lip Type | 6 |
| 26***15 | Bearing-Sleeve | 2 |
| 26***51 | Bearing-Sleeve | 2 |
269-2299 Valve Gp-Solenoid
| 26***99 | Valve Group-Solenoid; -Auxiliary, Boom Swing | 1 |
| 26***72 | Lines Group-Stick | 1 |
| 26***97 | Fastener Group-Lines; -Stick | 1 |
282-9318 Valve Gp-Solenoid
| 26***94 | Lines Group-Auxiliary Hydraulic; -Standard Stick | 1 |
| 26***96 | Control Ar-Auxiliary; -Swing Boom | 1 |
| 27***88 | Linkage Ar-Bucket; -With Lifting Eye | 1 |
169-1181 Valve Gp-Solenoid
| 09***29 | Seal-Lip Type | 6 |
| 09***68 | Pin-Cotter | 2 |
| 16***81 | Valve Group-Solenoid; -Blade | 1 |
Implements
264-8375 Boom Ar
| 26***75 | Boom Ar | 1 |
| 26***52 | Stick Group-Hoe; -Standard | 1 |
266-4087 Boom Gp
| 26***87 | Boom Group | 1 |
| 26***93 | Stick Group-Hoe; -Long, Heavy-Duty | 1 |
266-3935 Linkage Ar-Bucket
| 26***35 | Linkage Ar-Bucket | 1 |
| 27***61 | Stick Group-Hoe; -Heavy-Duty | 1 |
277-4349 Linkage Ar-Bucket -With Lifting Eye
| 27***65 | Stick Group-Hoe; -Standard, Thumb | 1 |
| 27***49 | Linkage Ar-Bucket; -With Lifting Eye | 1 |
| 28***48 | Valve Group-Relief; -Thumb | 1 |
270-6588 Linkage Ar-Bucket -With Lifting Eye
| 26***93 | Stick Group-Hoe; -Long, Heavy-Duty | 1 |
| 26***95 | Lines Group-Auxiliary Hydraulic; -Long Stick | 1 |
| 27***88 | Linkage Ar-Bucket; -With Lifting Eye | 1 |
278-9937 Linkage Gp-Bucket -With Lifting Eye
| 27***65 | Stick Group-Hoe; -Standard, Thumb | 1 |
| 27***37 | Linkage Group-Bucket; -With Lifting Eye | 1 |
| 28***48 | Valve Group-Relief; -Thumb | 1 |
277-4378 Linkage Gp-Bucket
| 27***67 | Stick Group-Hoe; -Long, Thumb | 1 |
| 27***78 | Linkage Group-Bucket | 1 |
| 28***48 | Valve Group-Relief; -Thumb | 1 |
266-9542 Stick Ar
| 26***42 | Stick Ar | 1 |
| 27***67 | Stick Group-Hoe; -Long, Thumb | 1 |
| 28***48 | Valve Group-Relief; -Thumb | 1 |
322-1398 Stick Ar -Standard, Thumb
| 26***95 | Lines Group-Auxiliary Hydraulic; -Long Stick | 1 |
| 26***96 | Control Ar-Auxiliary; -Swing Boom | 1 |
| 27***88 | Linkage Ar-Bucket; -With Lifting Eye | 1 |
270-6364 Stick Ar-Hoe -Standard, Thumb
| 09***29 | Seal-Lip Type | 6 |
| 17***94 | Shim; (0.5-mm Thk) | 3 |
| 17***95 | Shim; (1-mm Thk) | 3 |
322-1401 Stick Ar-Hoe -2nd Auxiliary, Long
| 14***34 | Seal-Dust | 4 |
| 26***13 | Bearing-Sleeve | 2 |
| 28***33 | Blade As | 1 |
266-4091 Stick Ar-Hoe -Standard
| 26***91 | Stick Ar-Hoe; -Standard | 1 |
| 26***94 | Lines Group-Auxiliary Hydraulic; -Standard Stick | 1 |
| 26***98 | Control Ar-Auxiliary; -2nd Auxiliary, Standard Stick | 1 |
322-1400 Stick Ar-Hoe -2nd Auxiliary, Standard Stick
| 26***79 | Cylinder Group-Blade; -Raise, Lower | 1 |
| 28***09 | Lines Group-Blade; -Angle | 1 |
| 28***10 | Lines Group-Swing Motor | 1 |
270-6360 Stick Ar-Hoe -Heavy-Duty
| 09***29 | Seal-Lip Type | 6 |
| 17***94 | Shim; (0.5-mm Thk) | 3 |
| 17***95 | Shim; (1-mm Thk) | 3 |
266-4092 Stick Ar-Hoe -Long, Heavy-Duty
| 26***92 | Stick Ar-Hoe; -Long, Heavy-Duty | 1 |
| 26***95 | Lines Group-Auxiliary Hydraulic; -Long Stick | 1 |
| 26***04 | Control Ar-Auxiliary; -2nd Auxiliary, Long Stick | 1 |
293-6220 Stick Ar-Hoe -Long, Thumb
| 15***00 | Shim; (0.5-mm Thk)(0.5-mm Thk) | 2 |
| 15***01 | Shim; (1.0-mm Thk)(1.0-mm Thk) | 2 |
| 21***81 | Pin As | 2 |
322-1399 Stick Ar-Hoe -Long
| 26***39 | Blade & Mounting Group | 1 |
| 26***79 | Cylinder Group-Blade; -Raise, Lower | 1 |
| 26***45 | Valve & Mtg Group-Bank | 1 |
270-6366 Stick Ar-Hoe -Long, Thumb
| 09***29 | Seal-Lip Type | 6 |
| 17***94 | Shim; (0.5-mm Thk) | 3 |
| 17***95 | Shim; (1-mm Thk) | 3 |
270-6363 Stick Ar-Hoe -Long, Heavy-Duty
| 09***29 | Seal-Lip Type | 6 |
| 17***94 | Shim; (0.5-mm Thk) | 3 |
| 17***95 | Shim; (1-mm Thk) | 3 |
293-6219 Stick Ar-Hoe -Standard, Thumb
| 21***81 | Pin As | 2 |
| 26***14 | Pin As | 2 |
| 28***32 | Blade Group-Straight | 1 |
266-4137 Stick Ar-Hoe -Standard
| 09***29 | Seal-Lip Type | 6 |
| 17***94 | Shim; (0.5-mm Thk) | 3 |
| 17***95 | Shim; (1-mm Thk) | 3 |
270-6367 Stick Gp-Hoe -Long, Thumb
| 13***90 | Tooth-Uni | 1 |
| 15***81 | Tooth Group-Uni | 3 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
266-4093 Stick Gp-Hoe -Long, Heavy-Duty
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 26***93 | Stick Group-Hoe; -Long, Heavy-Duty | 1 |
270-6365 Stick Gp-Hoe -Standard, Thumb
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***65 | Stick Group-Hoe; -Standard, Thumb | 1 |
270-6361 Stick Gp-Hoe -Heavy-Duty
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***61 | Stick Group-Hoe; -Heavy-Duty | 1 |
266-4052 Stick Gp-Hoe -Standard
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 24***76 | Pin As | 1 |
282-1712 Tilt Gp -Bucket
| 26***52 | Stick Group-Hoe; -Standard | 1 |
| 26***94 | Lines Group-Auxiliary Hydraulic; -Standard Stick | 1 |
| 28***12 | Tilt Group; (Bucket) | 1 |
Lubrication System
280-3721 Filler Gp-Engine Oil
| 19***62 | Bolt; (M8x1.25x20-mm) | 2 |
| 23***88 | Cap-Filler; (Engine Oil) | 1 |
| 28***21 | Filler Group-Engine Oil | 1 |
270-2015 Filter & Mtg Gp-Engine Oil
| 09***32 | Washer; (15.8x22.5x2-mm Thk) | 8 |
| 12***64 | Filter-Engine Oil | 1 |
| 23***89 | Bracket | 1 |
283-1289 Pump Gp-Engine Oil
| 10***25 | Valve As; (Oil Bypass)(Engine) | 1 |
| 19***53 | Switch As-Pressure; (Engine Oil) | 1 |
| 23***96 | Gasket | 1 |
283-1290 Pump Gp-Engine Oil
| 09***00 | Washer; (1.5mm Thk) | 4 |
| 19***13 | Washer; (6.5x13x1-mm) | 2 |
| 28***68 | Pump Group-Gerotor | 1 |
Machine Arrangement
298-3892 Chassis Ar
| 26***33 | Counterweight Group | 1 |
| 26***35 | Cover Group-Fender | 1 |
| 26***41 | Tank & Mtg Group-Fuel | 1 |
264-8372 Chassis Ar
| 26***72 | Chassis Ar | 1 |
| 26***48 | Plate & Film Group | 1 |
| 26***33 | Counterweight Group | 1 |
318-2845 Chassis Ar
| 26***35 | Cover Group-Fender | 1 |
| 26***41 | Tank & Mtg Group-Fuel | 1 |
| 26***48 | Lines Group-Fuel Filter | 1 |
264-8354 Common Ar
| 26***91 | Engine Ar-Primary | 1 |
| 26***99 | Installation Ar-Engine | 1 |
| 26***54 | Common Ar | 1 |
Operator Station
267-4377 Accessory Gp-Cab -Fan
| 26***77 | Accessory Group-Cab; -Fan | 1 |
| 27***99 | Mounting Group-Engine | 1 |
| 27***92 | Film Group; -Canopy | 1 |
267-4374 Accessory Gp-Cab -Screen
| 26***43 | Mounting Group-Engine | 1 |
| 26***74 | Accessory Group-Cab; -Screen | 1 |
| 27***92 | Film Group; -Canopy | 1 |
282-9307 Air Conditioner & Mounting Gp
| 27***43 | Foam | 2 |
| 27***86 | Roof | 1 |
| 27***23 | Bracket As | 1 |
282-9305 Air Conditioner Ar -With Air Duct
| 27***43 | Foam | 2 |
| 27***86 | Roof | 1 |
| 27***23 | Bracket As | 1 |
273-1445 Air Conditioner Gp
| 27***77 | Pulley As-Idler | 1 |
| 27***80 | Pulley | 1 |
| 27***81 | V-Belt; (Air Conditioner Compressor) | 1 |
276-0999 Cab Ar -With Heater
| 26***19 | Console Group-Operator; -Rh | 1 |
| 26***20 | Console Group-Operator; -Lh | 1 |
| 27***81 | Bumper | 1 |
276-0998 Cab Ar -With Air Conditioner
| 27***98 | Cab Ar; -With Air Conditioner | 1 |
| 28***30 | Condenser As-Refrigerant | 1 |
| 28***68 | Bracket As | 1 |
282-9688 Cab Gp
| 1R***96 | Bolt (35mm Long); (M6x1x35-mm) | 2 |
| 22***68 | Washer; (6.5x13x1-mm Thk) | 2 |
| 26***76 | Lever | 1 |
282-9689 Cab Gp
| 1R***96 | Bolt (35mm Long); (M6x1x35-mm) | 2 |
| 22***68 | Washer; (6.5x13x1-mm Thk) | 2 |
| 28***98 | Frame As; (Rh) | 1 |
276-0995 Canopy Ar
| 1R***96 | Bolt (35mm Long); (M6x1x35-mm) | 2 |
| 20***85 | Lockwasher | 1 |
| 20***97 | Bushing | 3 |
267-1611 Canopy Ar
| 1R***96 | Bolt (35mm Long); (M6x1x35-mm) | 2 |
| 20***85 | Lockwasher | 1 |
| 20***95 | Ring-Retaining | 2 |
308-9595 Canopy Gp
| 29***27 | Control Group-Joystick; -Rh | 1 |
| 29***30 | Control Group-Joystick; -Lh | 1 |
| 30***95 | Canopy Group | 1 |
283-0280 Canopy Gp
| 28***80 | Canopy Group-Open Rops | 1 |
| 28***10 | Plain Hose, Control Group-Joystick; -Lh | 1 |
| 28***09 | Control Group-Joystick; -Rh | 1 |
283-4171 Compressor Gp-Refrigerant
| 27***73 | Pedal As; (Lh) | 1 |
| 27***74 | Pedal As; (Rh) | 1 |
| 28***71 | Compressor Group-Refrigerant | 1 |
273-6072 Condenser & Mtg Gp-Refrigerant
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 19***92 | Valve Group-Pilot; -Blade Control | 1 |
| 26***16 | Handle Group-Modular; (Lh) | 1 |
268-2520 Console Gp-Operator -Lh
| 09***28 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 14***46 | Knob | 2 |
268-2519 Console Gp-Operator -Rh
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***83 | Pin-Spring | 1 |
| 21***23 | Nut | 1 |
263-2275 Console Gp-Operator -Armrest
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***83 | Pin-Spring | 1 |
| 19***92 | Valve Group-Pilot; -Blade Control | 1 |
283-6608 Control & Mtg Gp-Joystick
| 26***20 | Valve Group-Pilot; -Joystick | 1 |
| 28***11 | Control Group-Handle; -Rh | 1 |
| 28***08 | Control & Mtg Group-Joystick | 1 |
297-9326 Control & Mtg Gp-Joystick
| 26***20 | Valve Group-Pilot; -Joystick | 1 |
| 28***12 | Control Group-Handle; -Lh | 1 |
| 28***01 | Nut; (M14x2-mm Thd) | 1 |
272-0474 Control & Mtg Gp-Pedal -Travel
| 26***20 | Valve Group-Pilot; -Joystick | 1 |
| 27***74 | Control & Mtg Group-Pedal; -Travel | 1 |
| 28***10 | Control Group-Handle; -Rh | 1 |
298-0659 Control Gp-Blade -Angle
| 21***23 | Nut | 1 |
| 26***20 | Valve Group-Pilot; -Joystick | 1 |
| 29***34 | Control Group-Pilot Operated Hydraulic; -Rh | 1 |
289-4582 Control Gp-Blade -Angle
| 21***23 | Nut | 1 |
| 26***20 | Valve Group-Pilot; -Joystick | 1 |
| 28***82 | Control Group-Blade; -Angle | 1 |
283-6512 Control Gp-Handle -Lh
| 21***23 | Nut | 1 |
| 26***20 | Valve Group-Pilot; -Joystick | 1 |
| 28***12 | Control Group-Handle; -Lh | 1 |
283-6511 Control Gp-Handle -Rh
| 21***23 | Nut | 1 |
| 26***20 | Valve Group-Pilot; -Joystick | 1 |
| 28***11 | Control Group-Handle; -Rh | 1 |
283-6610 Control Gp-Handle -Rh
| 19***92 | Valve Group-Pilot; -Blade Control | 1 |
| 28***83 | Lever As | 1 |
| 28***10 | Control Group-Handle; -Rh | 1 |
285-8286 Control Gp-Hydraulic Hand -Travel
| 28***09 | Control Group-Joystick; -Rh | 1 |
| 28***10 | Plain Hose, Control Group-Joystick; -Lh | 1 |
| 28***86 | Control Group-Hydraulic Hand; -Travel | 1 |
283-6509 Control Gp-Joystick -Rh
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***83 | Pin-Spring | 1 |
| 26***29 | Boot | 1 |
297-9330 Control Gp-Joystick -Lh
| 29***30 | Control Group-Joystick; -Lh | 2 |
| 29***33 | Control Group-Joystick; -Rh | 1 |
| 3T***49 | Bolt-Socket Hd; (M6 X 1.0 X 25) | 6 |
319-7905 Control Gp-Joystick -Rh
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***83 | Pin-Spring | 1 |
283-6609 Control Gp-Joystick -Rh
| 28***09 | Control Group-Joystick; -Rh | 1 |
| 29***30 | Control Group-Joystick; -Lh | 1 |
| 29***33 | Control Group-Joystick; -Rh | 1 |
297-9327 Control Gp-Joystick -Rh
| 29***27 | Control Group-Joystick; -Rh | 1 |
| 31***03 | Control Group-Joystick; -Lh | 1 |
| 31***05 | Control Group-Joystick; -Rh | 1 |
297-9333 Control Gp-Joystick -Rh
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***83 | Pin-Spring | 1 |
319-7903 Control Gp-Joystick -Lh
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***83 | Pin-Spring | 1 |
| 26***29 | Boot | 1 |
283-6510 Control Gp-Joystick -Lh
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***83 | Pin-Spring | 1 |
| 26***29 | Boot | 1 |
297-9332 Control Gp-Pilot Operated Hyd
| 27***13 | Pipe | 1 |
| 28***53 | Support As | 1 |
| 28***25 | Plate | 1 |
319-7904 Control Gp-Pilot Operated Hyd -Lh
| 28***26 | Support As | 1 |
| 28***18 | Frame As | 1 |
| 31***04 | Control Group-Pilot Operated Hydraulic; -Lh | 1 |
297-9334 Control Gp-Pilot Operated Hyd -Rh
| 27***23 | Guard As | 1 |
| 27***24 | Seal | 1 |
| 28***07 | Bolt | 2 |
283-6508 Control Gp-Pilot Operated Hyd
| 27***73 | Cover As | 1 |
| 28***22 | Cover As-Access | 1 |
| 28***23 | Cover As-Access | 1 |
297-9331 Control Gp-Pilot Operated Hyd -Lh
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 4 |
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 10 |
| 17***46 | Louver As; (Lh) | 1 |
267-4359 Control Gp-Pilot Operated Hyd -Blade
| 26***59 | Control Group-Pilot Operated Hydraulic; -Blade | 1 |
| 27***73 | Cover As | 1 |
| 27***74 | Cover | 1 |
297-9328 Control Gp-Pilot Operated Hyd -Rh
| 09***42 | Screw; (Machine) (M6x1.0x16mm) | 2 |
| 13***25 | Lock As | 1 |
| 19***41 | Lock As | 1 |
319-7906 Control Gp-Pilot Operated Hyd -Rh
| 28***26 | Support As | 1 |
| 28***53 | Frame As | 1 |
| 31***06 | Control Group-Pilot Operated Hydraulic; -Rh | 1 |
312-6347 Cover Gp-Access
| 28***41 | Handle As | 1 |
| 28***42 | Handrail As | 1 |
| 28***43 | Plate As | 1 |
283-2049 Cover Gp-Access
| 26***63 | Guard Group-Window | 1 |
| 28***49 | Cover Group-Access | 1 |
| 33***86 | Mirror Group-Rear View; -Cab, With Front Guard | 1 |
281-1195 Door Gp-Cab
| 28***95 | Door Group-Cab | 1 |
| 28***41 | Handle As | 1 |
| 28***43 | Plate As | 1 |
282-9310 Duct Gp-Cab Air
| 28***10 | Duct Group-Cab Air | 2 |
| 28***11 | Heater & Mtg Group-Cab | 1 |
282-9306 Duct Gp-Cab Air
| 09***12 | Clip | 1 |
| 16***95 | Strap; (Cable) | 2 |
| 25***57 | Tube | 1 |
276-3316 Guard Gp-Canopy -Front Glass
| 24***98 | Horn As; (12-Volt) | 1 |
| 27***16 | Guard Group-Canopy; -Front Glass | 1 |
| 8T***00 | Bolt (M8x1.25x16mm); (M8x1.25x16-mm) | 1 |
276-3315 Guard Gp-Canopy -Mesh
| 18***00 | Screw-Tapping | 40 |
| 27***15 | Guard Group-Canopy; -Mesh | 1 |
| 28***86 | Filter Element-Cab Air | 1 |
283-5452 Guard Gp-Window
| 21***68 | Washer; (8.5x30x3.2-mm Thk) | 1 |
| 21***69 | Washer; (16x26x0.5-mm Thk) | 4 |
| 28***87 | Link As-Lower | 1 |
267-4363 Guard Gp-Window
| 09***87 | Clamp, Hose | 1 |
| 09***79 | Tape-Color; (White) | 0 |
| 09***85 | Tape-Color; (Red) | 0 |
283-5425 Guard Gp-Window
| 09***87 | Clamp, Hose | 1 |
| 09***79 | Tape-Color; (White) | 0 |
| 09***85 | Tape-Color; (Red) | 0 |
334-4706 Guard Gp-Window -Cab
| 27***04 | Support As | 1 |
| 33***06 | Guard Group-Window; -Cab | 1 |
| 4Y***07 | Mirror (Under View) | 1 |
312-7457 Handrail Gp
| 15***17 | Mirror | 1 |
| 15***18 | Support As | 1 |
| 27***85 | Bracket As | 1 |
282-9693 Handrail Gp
| 15***17 | Mirror | 1 |
| 28***93 | Handrail Group | 1 |
| 28***82 | Mounting Group-Mirror | 1 |
282-9311 Heater & Mtg Gp-Cab
| 15***17 | Mirror | 1 |
| 15***18 | Support As | 1 |
| 28***11 | Heater & Mtg Group-Cab | 1 |
282-9309 Heater Ar-Cab -With Air Duct
| 15***17 | Mirror | 1 |
| 15***18 | Support As | 1 |
| 28***09 | Heater Ar-Cab; -With Air Duct | 1 |
273-1450 Heater Gp-Cab
| 15***17 | Mirror | 1 |
| 15***18 | Support As | 1 |
| 27***50 | Heater Group-Cab | 1 |
266-6852 Horn Gp-Electric
| 26***52 | Horn Group-Electric | 1 |
| 2U***52 | Lockwasher From 5wd169 - Up And Field Installed | 5 |
| 6V***83 | Bolt (16mm Long); (M6x1x16-mm) | 3 |
277-9378 Lines Gp-Air Conditioner
| 26***75 | Console Group-Operator; -Armrest | 1 |
| 26***90 | Platform Group-Operator | 1 |
| 27***78 | Lines Group-Air Conditioner | 1 |
277-9381 Lines Gp-Heater
| 1S***14 | Grommet (1.75 In. I.D.)- To Platform | 2 |
| 23***87 | Clamp | 1 |
| 26***48 | Mount As-Platform | 4 |
281-1186 Link Gp-Window
| 1S***14 | Grommet (1.75 In. I.D.)- To Platform | 2 |
| 23***87 | Clamp | 1 |
| 26***48 | Mount As-Platform | 4 |
267-4371 Mirror Gp-Down View -Exterior, Rear, Rh
| 1S***14 | Grommet (1.75 In. I.D.)- To Platform | 2 |
| 23***87 | Clamp | 1 |
| 26***71 | Mirror Group-Down View; -Exterior, Rear, Rh | 1 |
267-4370 Mirror Gp-Rear View -Exterior, Rh
| 20***33 | Bolt; (7/16-20x1.1-In)(7/16-20x11.0in) | 2 |
| 26***70 | Mirror Group-Rear View; -Exterior, Rh | 1 |
| 27***81 | Seat Belt Group | 1 |
334-1186 Mirror Gp-Rear View -Cab, With Front Guard
| 20***33 | Bolt; (7/16-20x1.1-In)(7/16-20x11.0in) | 2 |
| 27***82 | Seat Belt Group | 1 |
| 33***86 | Mirror Group-Rear View; -Cab, With Front Guard | 1 |
267-4366 Mirror Gp-Rear View -Exterior, Lh
| 1S***14 | Grommet (1.75 In. I.D.)- To Platform | 2 |
| 23***87 | Clamp | 1 |
| 26***66 | Mirror Group-Rear View; -Exterior, Lh | 1 |
267-4368 Mirror Gp-Rear View -Exterior, Lh
| 26***68 | Mirror Group-Rear View; -Exterior, Lh | 1 |
| 28***36 | Seat Group | 1 |
| 31***66 | Knob | 1 |
267-4367 Mirror Gp-Rear View -Exterior, Rh
| 26***67 | Mirror Group-Rear View; -Exterior, Rh | 1 |
| 28***37 | Seat Group | 1 |
| 31***66 | Knob | 1 |
286-9482 Mounting Gp-Mirror
| 28***38 | Seat Group | 1 |
| 28***82 | Mounting Group-Mirror | 1 |
| 31***66 | Knob | 1 |
268-4189 Operator Ar
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 2 |
| 14***95 | Hose; (650-cm Each) | 0 |
| 26***89 | Operator Ar | 1 |
268-4190 Platform Gp-Operator
| 25***39 | Roller | 2 |
| 26***90 | Platform Group-Operator | 1 |
| 27***29 | Motor As-Window Wiper | 1 |
309-1408 Platform Gp-Operator
| 27***79 | Film-Instruction; (Auxiliary, Swing Boom) | 1 |
| 28***59 | Film-Instruction; (Auxiliary) | 1 |
| 30***08 | Platform Group-Operator | 1 |
267-1615 Seat & Mounting Gp -Low Back, Suspension, Vinyl
| 19***66 | Film-Identification; (Caterpillar)(Cat) | 1 |
| 26***15 | Seat & Mounting Group; -Low Back, Suspension, Vinyl | 1 |
267-1614 Seat & Mounting Gp -Cloth, Low Back, Suspension
| 26***14 | Seat & Mounting Group; -Cloth, Low Back, Suspension | 1 |
| 27***77 | Film-Instruction; (Operator Controls, Read Omm) | 1 |
| 27***10 | Film-Control; (2-Way Pattern) | 1 |
267-1616 Seat Belt Gp -Retractable, 3-In
| 18***85 | Film-Information; (Alternate Exit) | 1 |
| 19***66 | Film-Identification; (Caterpillar)(Cat) | 1 |
| 26***16 | Seat Belt Group; -Retractable, 3-In | 1 |
283-0278 Seat Belt Gp -Retractable, 2-In
| 27***61 | Film-Instruction; (Blade Angle) | 1 |
| 28***78 | Seat Belt Group; -Retractable, 2-In | 1 |
| 7X***29 | Film; (Lift And Tie Down) (W/O Ripper: On Side Of Track Roller Frame Between Front Roller And Idler And Between Rear Roller And Idler (2 Each Side)) (W Ripper: On Side Of Track Roller Frame Between Front Roller And Idler And On Side Of Lower Ripper Frame By Rea | 2 |
267-1617 Seat Gp-Suspension -Cloth, High Back
| 26***17 | Seat Group-Suspension; -Cloth, High Back | 1 |
| 27***61 | Film-Instruction; (Blade Angle) | 1 |
| 7X***29 | Film; (Lift And Tie Down) (W/O Ripper: On Side Of Track Roller Frame Between Front Roller And Idler And Between Rear Roller And Idler (2 Each Side)) (W Ripper: On Side Of Track Roller Frame Between Front Roller And Idler And On Side Of Lower Ripper Frame By Rea | 2 |
277-9380 Washer Gp-Window
| 27***80 | Washer Group-Window | 1 |
| 29***10 | Film-Instruction; (Joystick Control) | 1 |
280-0421 Window Gp-Front
| 27***68 | Film-Instruction; (Operator Controls, Auxiliary) | 1 |
| 28***21 | Window Group-Front | 1 |
| 28***58 | Film-Instruction; (Joystick Control) | 1 |
281-4451 Window Gp-Sliding
| 27***68 | Film-Instruction; (Operator Controls, Auxiliary) | 1 |
| 28***51 | Window Group-Sliding | 1 |
| 29***11 | Film-Instruction; (Joystick Control) | 1 |
Power Train
288-3462 Drive Gp-Final
| 09***74 | Seal-O-Ring (Id=6.8mm); (Id=6.80mm) | 4 |
| 09***80 | Seal-O-Ring (Id=11.80mm) | 3 |
| 09***82 | Seal-O-Ring (Id=13.80mm) | 4 |
280-3097 Drive Gp-Final
| 09***25 | Seal-O-Ring (Id=154.30mm) | 1 |
| 09***71 | Pipe Plug (1/8 Npt) | 2 |
| 14***37 | Ball | 132 |
284-0878 Drive Gp-Final
| 09***74 | Seal-O-Ring (Id=6.8mm); (Id=6.80mm) | 4 |
| 09***78 | Seal-O-Ring (Id=9.80mm) | 2 |
| 09***82 | Seal-O-Ring (Id=13.80mm) | 2 |
265-8754 Motor & Mtg Gp-Travel
| 26***54 | Motor & Mtg Group-Travel | 1 |
| 28***62 | Drive Group-Final | 2 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 22 |
264-8364 Power Train Ar
| 26***70 | Sprocket Group | 2 |
| 26***64 | Power Train Ar | 1 |
| 26***53 | Motor & Mtg Group-Swing | 1 |
264-5370 Sprocket Gp
| 26***70 | Sprocket Group | 1 |
| 26***71 | Sprocket | 1 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 11 |
Service Equipment And Supplies
273-0475 Film Gp -Control Pattern
| 22***17 | Film; (Warning) (Seatbelt) (On Lh Post Inside Cab) | 1 |
| 22***45 | Film-Warning; (Do Not Use Ether, U.S) | 1 |
| 22***13 | Film; (Warning) (Jump Start) (Inside Of Lh Battery Box Cover) | 1 |
273-0492 Film Gp -Canopy
| 22***45 | Film-Warning; (Seat Belt, International) | 1 |
| 22***54 | Film-Warning; (Universal, Read Omm, Intl) | 1 |
| 22***46 | Film-Warning; (No Ether Spray/Air Intk, Intl) | 1 |
280-7671 Film Gp
| 12***00 | Film-Instruction; (Lever Lock) | 1 |
| 13***58 | Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap) | 1 |
| 13***99 | Film-Instruction; (Engine Speed Dial)(Throttle Setting) | 1 |
283-4719 Film Gp -Auxiliary
| 28***19 | Film Group; -Auxiliary | 1 |
280-7666 Film Gp
| 12***00 | Film-Instruction; (Lever Lock) | 1 |
| 13***58 | Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap) | 1 |
| 13***99 | Film-Instruction; (Engine Speed Dial)(Throttle Setting) | 1 |
283-4718 Film Gp -Standard
| 12***00 | Film-Instruction; (Lever Lock) | 1 |
| 13***58 | Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap) | 1 |
| 13***99 | Film-Instruction; (Engine Speed Dial)(Throttle Setting) | 1 |
268-4783 Film Gp -Auxiliary
| 10***73 | Film-Stripe; (Accent Red)(800-cm) | 0 |
| 12***00 | Film-Instruction; (Lever Lock) | 1 |
| 13***58 | Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap) | 1 |
273-0666 Film Gp -Cab
| 12***00 | Film-Instruction; (Lever Lock) | 1 |
| 13***58 | Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap) | 1 |
| 13***99 | Film-Instruction; (Engine Speed Dial)(Throttle Setting) | 1 |
319-8342 Plate & Film Gp
| 31***42 | Plate & Film Group | 1 |
265-7048 Plate & Film Gp
| 26***48 | Plate & Film Group | 1 |
298-2288 Plate & Film Gp
| 29***88 | Plate & Film Group | 1 |
277-8159 Plate & Film Gp -International
| 27***59 | Plate & Film Group; -International | 1 |
277-8158 Plate & Film Gp -U.S.
| 27***58 | Plate & Film Group; -U.S. | 1 |
Undercarriage
265-8737 Frame Gp-Undercarriage
| 19***31 | Cover | 1 |
| 26***37 | Frame Group-Undercarriage | 1 |
| 26***92 | Cover | 2 |
260-6347 Gear & Bearing Gp-Swing
| 14***86 | Dowel | 2 |
| 22***51 | Seal; (180-cm) | 0 |
| 22***52 | Seal; (128-cm Each) | 0 |
263-9266 Guard Gp-Track Guide
| 26***66 | Guard Group-Track Guide | 1 |
| 26***67 | Guard As-Track Guide; (Lh) | 1 |
| 26***68 | Guard As-Track Guide; (Rh) | 1 |
267-4828 Idler Gp-Front -Rh
| 09***95 | Seal-O-Ring (Id=27.70mm) | 2 |
| 09***04 | Seal-O-Ring (Id=39.70mm) | 1 |
| 09***94 | Ring-Backup | 1 |
267-4827 Idler Gp-Front -Lh
| 09***95 | Seal-O-Ring (Id=27.70mm) | 2 |
| 09***04 | Seal-O-Ring (Id=39.70mm) | 1 |
| 09***94 | Ring-Backup | 1 |
265-8734 Idler Gp-Front
| 26***34 | Idler Group-Front | 1 |
| 26***27 | Idler Group-Front; -Lh | 1 |
| 26***28 | Idler Group-Front; -Rh | 1 |
263-9253 Link As-Track
| 15***76 | Link-Track; (Rh) | 45 |
| 15***77 | Link-Track; (Lh) | 45 |
| 15***78 | Link-Master; (Rh) | 1 |
260-6342 Roller Ar-Track & Carrier
| 26***42 | Roller Ar-Track & Carrier | 1 |
| 26***93 | Roller Group-Track-Center Flange | 8 |
| 26***94 | Roller Group-Track Carrier | 2 |
266-8794 Roller Gp-Track Carrier
| 26***94 | Roller Group-Track Carrier | 1 |
| 27***96 | Seal As | 1 |
| 27***97 | Cap As | 1 |
266-8793 Roller Gp-Track-Center Flange
| 08***93 | Plug; (1/8"Thd) | 1 |
| 09***57 | Seal-O-Ring | 1 |
| 23***56 | Bearing-Sleeve | 2 |
263-9256 Track Ar -Steel, With Rubber Pads
| 26***56 | Track Ar; -Steel, With Rubber Pads | 1 |
| 26***57 | Track Group; -Steel, With Rubber Pads, Lh | 1 |
| 26***58 | Track Group; -Steel, With Rubber Pads, Rh | 1 |
263-9252 Track Gp -Steel
| 15***84 | Shoe-Track | 46 |
| 26***52 | Track Group; -Steel | 1 |
| 26***53 | Link As-Track | 1 |
263-9251 Track Gp -Double Grouser Shoe
| 26***51 | Track Group; -Double Grouser Shoe | 1 |
| 26***52 | Track Group; -Steel | 1 |
| 26***66 | Guard Group-Track Guide | 1 |
263-9249 Track Gp -Rubber
| 26***49 | Track Group; -Rubber | 1 |
| 26***50 | Track-Rubber | 1 |
263-9257 Track Gp -Steel, With Rubber Pads, Lh
| 21***18 | Pad As-Rubber | 46 |
| 21***19 | Bolt; (M12x1.75x25-mm) | 46 |
| 21***20 | Lockwasher | 46 |
263-9255 Track Gp -Steel, With Rubber Pads
| 16***94 | Washer; (12.2x21.5x6-mm Thk) | 92 |
| 18***84 | Pad As | 46 |
| 26***52 | Track Group; -Steel | 1 |
263-9258 Track Gp -Steel, With Rubber Pads, Rh
| 21***18 | Pad As-Rubber | 46 |
| 21***19 | Bolt; (M12x1.75x25-mm) | 46 |
| 21***20 | Lockwasher | 46 |
263-9254 Track Gp -Steel, With Rubber Pads
| 26***54 | Track Group; -Steel, With Rubber Pads | 1 |
| 26***55 | Track Group; -Steel, With Rubber Pads | 1 |
| 26***66 | Guard Group-Track Guide | 1 |
264-8363 Undercarriage Ar
| 26***42 | Roller Ar-Track & Carrier | 1 |
| 26***47 | Gear & Bearing Group-Swing | 1 |
| 26***63 | Undercarriage Ar | 1 |
Work Tools
281-8697 Blade & Mounting Gp -Power Angle
| 13***90 | Tooth-Uni | 1 |
| 15***81 | Tooth Group-Uni | 3 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
261-1139 Blade & Mounting Gp
| 13***90 | Tooth-Uni | 1 |
| 15***81 | Tooth Group-Uni | 4 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
264-8371 Blade Ar
| 13***90 | Tooth-Uni | 1 |
| 15***81 | Tooth Group-Uni | 4 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
281-8696 Blade Ar -Angling
| 13***90 | Tooth-Uni | 1 |
| 15***81 | Tooth Group-Uni | 4 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
284-3832 Blade Gp-Straight
| 13***90 | Tooth-Uni | 1 |
| 14***63 | Screw-Flat Head; (M16x2x65-mm) | 1 |
| 15***81 | Tooth Group-Uni | 3 |
279-4325 Bucket Ar-Tiltable
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 1U***02 | Tip-Penetration; (Long) | 1 |
279-4323 Bucket As-Ditch Cleaning
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 1U***02 | Tip-Penetration; (Long) | 1 |
279-4322 Bucket As-Ditch Cleaning
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 1U***02 | Tip-Penetration; (Long) | 1 |
282-9315 Bucket As-Ditch Cleaning
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 1U***02 | Tip-Penetration; (Long) | 1 |
281-1551 Bucket Gp-General Purpose
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***80 | Bolt-Socket Head; (M5x0.8x16-mm)(European Sourced) | 3 |
| 10***44 | Fan Group-Circulating | 1 |
279-4312 Bucket Gp-General Purpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 1U***02 | Tip-Penetration; (Long) | 1 |
279-4320 Bucket Gp-General Purpose
| 09***68 | Pin-Cotter | 2 |
| 22***56 | Pin As | 2 |
| 27***20 | Bucket Group-General Purpose | 1 |
279-4321 Bucket Gp-General Purpose
| 27***88 | Screen As-Cab | 1 |
| 27***21 | Bucket Group-General Purpose | 1 |
| 3C***78 | Screw-Machine; (M6x1x10-mm) | 2 |
279-4313 Bucket Gp-General Purpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 1U***02 | Tip-Penetration; (Long) | 1 |
281-3824 Bucket Gp-General Purpose
| 09***12 | Clip | 1 |
| 16***95 | Strap; (Cable) | 2 |
| 25***57 | Tube | 1 |
303-1329 Bucket Gp-Hoe -Heavy-Duty
| 09***07 | Nut; (M12x1.75-Thd) | 4 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***25 | Hook | 1 |
303-1326 Bucket Gp-Hoe -Heavy-Duty
| 26***90 | Platform Group-Operator | 1 |
| 27***66 | Film Group; -Cab | 1 |
| 27***72 | Condenser & Mtg Group-Refrigerant | 1 |
303-1327 Bucket Gp-Hoe -Heavy-Duty
| 26***90 | Platform Group-Operator | 1 |
| 27***99 | Mounting Group-Engine | 1 |
| 27***66 | Film Group; -Cab | 1 |
303-1328 Bucket Gp-Hoe -Heavy-Duty
| 17***39 | Receptacle As; (Power Supply) | 1 |
| 18***05 | Clip | 3 |
| 28***12 | Bracket | 1 |
303-1324 Bucket Gp-Hoe -Heavy-Duty
| 28***06 | Duct Group-Cab Air | 1 |
| 28***07 | Air Conditioner & Mounting Group | 1 |
| 30***24 | Bucket Group-Hoe; -Heavy-Duty | 1 |
303-1325 Bucket Gp-Hoe -Heavy-Duty
| 18***00 | Screw-Tapping | 41 |
| 24***19 | Clip | 2 |
| 28***86 | Filter Element-Cab Air | 1 |
220-0858 Mounting Gp-Bucket
| 09***07 | Nut; (M12x1.75-Thd) | 4 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***25 | Hook | 1 |
303C CR serial number reference
The PIN plate on a 303C CR mini excavator is a riveted metal tag mounted on the machine frame near the base of the cab/operator platform (some units carry a second tag lower on the front frame below the cab). The plate shows the full Caterpillar model code plus the 17-character PIN; the last 8 characters are the serial number, and the first 3 of those 8 are the plant/model serial prefix (e.g. BXT or AZS) followed by the sequential unit number - read those 3 letters to identify the build family before ordering parts.
| Prefix | Identifies | Notes |
|---|---|---|
| BXT | World/export market build (standard configuration) | Main production run for the 303C CR. Sources place manufacture roughly across 2005-2011 (span varies slightly by source/market). Sub-ranges documented in the factory parts book: BXT1-209, BXT210-3500, BXT3501-UP, tied to running engine/assembly and cooling-system changes, not a full model redesign. Engine is the naturally aspirated Mitsubishi-built S3Q2 diesel, rated about 23 brake kW (31 hp) at 2300 rpm. Do not confuse with the later Cat-brand C1.1 Turbo, Tier 4 Final/Stage V machine also sold under a '303 CR' nameplate - that is a separate, newer reissue and does not use this prefix or engine. |
| AZS | Japan-market/JDM build, same 303C CR chassis (grey-market import into other regions) | Confirm with dealer. Documented in a factory-style service manual scoped to AZS00001-UP as the Japan-built counterpart to the world-model BXT machine, same production era. Treated in the field as a grey-market machine outside Japan: Japanese-language gauges/manuals, an extra control-pattern-selector position count, and possible differences in pump/hydraulic calibration versus a BXT unit. Engine is expected to be the same S3Q2 family; confirm exact rating with a dealer for a specific unit. |
Frequently asked questions
What engine powers the Cat 303C CR?
A Mitsubishi S3Q2, a naturally aspirated 3-cylinder diesel rated about 23 kW gross / 22 kW net (30-31 hp) at 2300 rpm, meeting EU Stage II emissions. The larger 303.5C CR uses a turbocharged S3Q2-T version of the same block; the two are not interchangeable parts sets.
What is the operating weight of the Cat 303C CR?
Base operating weight is 3,170 kg with canopy or 3,290 kg with cab. With the optional extra counterweight it rises to 3,435 kg (canopy) or 3,555 kg (cab). Exact figure varies by configuration and attachment.
What replaced the Cat 303C CR?
The 303E CR (2011-2021) succeeded it, moving to a mechanical Cat C1.3 engine that met Tier 4 emissions rules without a diesel particulate filter. The earlier bare "303"/"303 CR" (2003-2006) was its predecessor, a separate earlier generation, not a variant of the same one.
What 303C CR owners discuss
Is the heavy vibration and rattle at idle on a 303C CR something to worry about?
Some shake and rattle at idle is normal for this machine's small Mitsubishi S3Q2 three-cylinder diesel. With only three cylinders on one crank there isn't much rotating mass to damp the pulses, so the cab shakes and trim rattles at low rpm. It smooths out once rpm comes up a few hundred over idle. Treat it as a design trait, not a fault. A rattle that does not calm down as revs climb, or that comes with a knock, is different and points at loose sheet metal, a heat shield, or an internal engine problem. Have your dealer check any noise that persists at higher rpm.
What causes hard starting or rough running on these machines?
Two separate things get blamed. On the fuel side, the mechanical governor and injection pump timing marks on this engine are fiddly to line up during service; get them a notch off and fuel delivery suffers, causing rough running or a no-start even though the engine cranks over fine. On the electrical side, carbon-fouled or worn glow plugs, a tired glow relay, and corroded harness connectors cause slow, cold-natured starts. Many owners hold the glow/shutoff button in for several seconds before cranking in cold weather as routine practice. Because governor and injection timing affect fuel delivery and engine behavior, have your dealer verify the setting after any injection pump work.
Auto-idle used to work and now it won't kick in. What usually fails?
This is a recurring complaint on this model. Start with the hydraulic lockout lever switch and its plunger; cycling the lockout lever sometimes forces auto-idle to re-engage, which points at that switch or its wiring rather than the engine itself. Trace the harness for the auto-idle circuit next, since factory wiring diagrams for this switch are thin and owners often have to work it out by testing rather than reading a clean schematic. If the switch, plunger, and wiring all test fine, the idle/engine control module is the remaining suspect, and that is a dealer-level replacement.
Fuses keep blowing and the machine won't crank consistently. Where do I look?
Chafed insulation where the harness rubs against a bracket or sharp edge is a common root cause of a fuse tied to the start circuit blowing repeatedly. Corroded connectors and a worn ignition switch also produce intermittent no-crank or no-glow-plug symptoms. Because start, glow, and safety-interlock functions can share protection on this machine, trace the circuit with a wiring diagram instead of just fitting a bigger fuse. Have your dealer verify any repair that touches start or safety-interlock wiring before returning the machine to work.
Swing is weak or dead while everything else works fine. Pump or valve?
If travel and boom/stick/bucket all work normally, the pump is supplying flow, so look at the swing section of the main control valve and the swing motor next. The swing brake sits inside the swing motor, spring-applied and released by hydraulic pressure, so a brake that won't release looks just like a dead swing circuit from the seat. A stuck or worn relief/overload valve has also turned up rerouting oil and causing odd symptoms, including the pump loading up during cranking along with sluggish travel. Chase the valve and motor before condemning the main pump.
What wears out on the undercarriage and final drives on this size of machine?
The travel motor to sprocket joint is the known weak point: the face seal between the hydraulic motor and the planetary hub lets gear oil weep out and lets dirt and water work in, which contaminates the final drive oil and accelerates gear and bearing wear. Check final-drive oil level and condition on a schedule instead of waiting for a visible drip, and do not overfill, since that itself is a known cause of seal leakage. Rubber tracks, rollers, and idlers wear faster when track tension runs loose or the machine works constantly on abrasive ground, so keep tension in spec and inspect rollers for flat spots or oil weep at the seals.
What should I check before buying a used 303C CR?
Confirm it is the C-model configuration, with the control valve mounted on the outside of the house on the right side; the earlier design buries the valve under the cab floor and is much harder to service. Check the serial prefix and ask whether the machine was imported rather than sold new through the normal dealer network; imported units can carry a different regional configuration, and some dealers are reluctant to pull parts by serial number for them, so confirm parts support before you buy. Run the machine to full operating temperature and exercise every function, swing, travel in both directions, boom, stick, and bucket, watching for uneven speed or delay. Tilt the machine on the bucket to run each track clear of the ground and check for cuts, chunking, or dry rot in the rubber, check final-drive oil for water or metal, and look for weld repairs on the boom, stick, and carbody. Pull engine and hydraulic oil samples for lab analysis and ask for maintenance records. Have your dealer confirm the PIN and configuration and inspect the machine before you close the deal.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 303C CR part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.