Caterpillarengine - machine(no series)
Caterpillar 3013
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 3013 is a naturally aspirated, 3-cylinder, 1.5L (1496 cc) industrial diesel engine sold as a power unit rather than a stand-alone machine. It is built on the Perkins 403C-15/403D-15 architecture and marketed under Cat's C1.5 small industrial engine family, alongside the C1.1 (3011C) and C2.2 (3024C/3014) displacement classes. It is mechanically fuel-injected with no ECM and no true electronic fault codes. Dry weight is about 149 kg, with gross power ratings from roughly 20.9 to 30 kW depending on application and governed speed. Caterpillar fits the 3013 into its own equipment as a component engine: 302.5/303.5-class mini hydraulic excavators, CB-series vibratory compactors, 216-242 series compact and multi-terrain loaders, and industrial generator, pump, and compressor packages. It is offered as a bare long block, a complete power unit with mounts and PTO, or as part of a packaged genset.
Within the C1.5 family, the naturally aspirated 3013 was the base rating; Caterpillar later added the turbocharged 3013C for higher output without stepping up to a larger 4-cylinder displacement. Host machines moved on faster than the engine did. The 302.5/303.5 mini excavator line and the 216-242 loader series were updated through later B-series and CR revisions with newer engines, but the mechanically simple, ECM-free 3013 kept running in the field long after those changes. That simplicity is exactly why it still matters in the used and parts market: no emissions aftertreatment, no electronic diagnostics to fail, and a rebuildable liner-and-piston architecture that keeps overhaul kits in production. Reman units, take-out engines, and full rebuild kits remain readily available for owners keeping older excavators, compactors, and gensets in service.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 3013 specifications
Engine
| Model / family | Cat 3013, part of the C1.5 industrial engine family (naturally aspirated base rating; turbocharged rating documented under the related 3013C designation) |
| Configuration | Vertical, water-cooled, 4-stroke, inline 3-cylinder diesel |
| Gross power (naturally aspirated, as fitted to Cat 303.5 mini excavator) | 20 kW (27 hp) per SAE J1995 |
| Net power (naturally aspirated, as fitted to Cat 303.5 mini excavator) | 19 kW (25 hp) at 2300 rpm per ISO 9249 / SAE J1349 |
| Power range across C1.5 family ratings (naturally aspirated) | 20.9-25.1 kW (28-33.7 hp) at 2200-3000 rpm; varies by rating/configuration |
| Power range across C1.5 family ratings (turbocharged) | 23.1-30 kW (31-40.2 hp) at 2200-3000 rpm; varies by rating/configuration |
| Displacement | 1.5 L (1,496 cc / 91.3 in³) |
| Bore x stroke | 84 mm x 90 mm (3.31 in x 3.54 in) |
| Compression ratio | 22.5:1 |
| Aspiration | Naturally aspirated (3013 base rating); turbocharged version available in the same engine family, sold as 3013C |
| Emissions tier | EU Stage IIIA on the core industrial ratings; select later ratings within the C1.5 family are certified to US EPA Tier 4 Final. Exact tier depends on rating and region — verify against the nameplate for a specific unit. |
Weights
| Dry weight, naturally aspirated | 149 kg (328 lb) |
| Dry weight, turbocharged | 156.5 kg (345 lb) |
| Shipping weight / ground pressure | Not published — this is a base engine, not a self-propelled machine, so these figures are not applicable |
Dimensions
| Length x width x height, naturally aspirated | 572 mm x 453 mm x 643 mm (22.5 in x 17.8 in x 25.3 in) |
| Length x width x height, turbocharged | 572 mm x 512 mm x 643 mm (22.5 in x 20.2 in x 25.3 in) |
| Wheelbase / track gauge / ground clearance | Not applicable — base engine only, no chassis dimensions published |
Performance
| Peak torque (naturally aspirated) | 79.9 N·m (58.9 lb-ft) at 3000 rpm |
| Rated speed range | 2200-3000 rpm depending on power rating selected |
| Travel speed / dig / lift / drawbar / gradeability | Not applicable — this is a base engine, not a complete machine, so vehicle-level performance figures are not published for it |
Service capacities (summary)
| Engine oil (refill) | 6.0 L (6.3 US qt) |
| Cooling system | 2.6 L (2.7 US qt) |
| Fuel system | Mechanical fuel injection with electronic shut-off solenoid; standalone fuel tank capacity not published at the engine level |
| Hydraulic system | Not applicable — base engine has no onboard hydraulic system |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
3013 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 5.7 L (1.5 US gal) | Cat DEO (Diesel Engine Oil). SAE 15W-40 for ambient -18°C to 40°C (0°F to 104°F); SAE 10W-30 for wider range down to about -20°C (-4°F) in cold climates, matching this engine's glow-plug-assisted cold-start rating. |
| Cooling system | 4.9 L (1.3 US gal), engine-side fill | Cat ELC (Extended Life Coolant) or Cat DEAC (Diesel Engine Antifreeze/Coolant), premixed 50/50 with water. Full-strength ELC extends protection to roughly -37°C (-34°F); check concentration for local climate before winter. |
| Fuel tank | 54.1 L (14.3 US gal) | Ultra-low sulfur No. 2-D diesel meeting ASTM D975 (or EN 590 outside North America). Switch to No. 1-D or a winter blend in cold climates to prevent fuel gelling. |
| Hydraulic tank | 45.4 L (12.0 US gal) | Cat HYDO Advanced (10W, 20W or 30W by ambient temperature) as first choice; Cat TDTO or Cat DEO accepted as second-choice fill for this hydrostatic/hydraulic system. |
| Hydraulic system, total (tank plus lines, cylinders and pump) | 68.9 L (18.2 US gal) | Same fluid as hydraulic tank: Cat HYDO Advanced, viscosity grade selected for site ambient temperature. |
| Swing drive | Not published in general spec literature for this engine/machine combination; verify exact fill quantity against the OMM refill-capacities table or with a Cat dealer | Cat TDTO (Transmission/Drive Train Oil) family gear oil, per Cat's powertrain fluid guidance for this compartment class. |
| Final drives (each, track travel motor/reduction gear case) | Not published in general spec literature for this engine/machine combination; small sealed planetary case, verify exact fill quantity against the OMM or with a Cat dealer | Cat TDTO family gear oil. |
| Grease (spec only) | N/A, spec only | Cat MPGM (Multipurpose Grease), NLGI 2, for pins and bushings under normal conditions; Cat Arctic Platinum Grease for sustained sub-zero climates. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 3013 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 6,000 h |
|
Servicing the 3013 beyond the schedule
Predictive Maintenance & Fluid Analysis
Mechanically injected with no ECM, the 3013 has no downloadable fault codes, so condition monitoring leans on oil sampling and inspection rather than diagnostics. Pull an oil sample at every change to catch coolant intrusion or injection-pump wear early. Watch exhaust smoke color and injector knock as first-line fault indicators. Track fuel filter restriction, since this engine's camshaft-driven mechanical pump is sensitive to fuel contamination. Monitor coolant condition closely too. The cast-iron block and head corrode fast once inhibitor depletes.
Corrective & Common Repairs
Typical faults trace to age and idle time rather than electronics. Hard starting after sitting is common: check glow plugs, battery condition, and fuel for gelling or air intrusion in the mechanical injection pump before condemning the engine. Crankcase breather clogging causes oil seepage and blue smoke. Clean it before deeper diagnosis. Starter and charging faults are frequent on machines that sit between jobs. Because host machines run this engine hard through mounts and couplings, check engine mounts and drive alignment when chasing vibration complaints.
Overhaul & Rebuild Points
The 3013 is built around replaceable cylinder liners rather than a fixed bore, so a major overhaul is an in-frame rebuild: liners, pistons, rings, valves, guides, seats, and bearing sets, not a block swap. Rebuild kits covering this scope are still produced for the engine, reflecting steady demand from older excavators and compactors still running it. At rebuild, check crankshaft and connecting-rod bearing clearances, valve seat condition, and injection pump timing and calibration. Retorque cylinder head bolts and reset valve lash before startup.
Seasonal & Environment Servicing
Cold starts depend entirely on glow plug condition and battery state, since there's no ECM-managed glow cycle to compensate for a weak system. Fuel gelling in unheated tanks is a common winter complaint on idle machines. Hot, dusty duty on compactors and skid-steer loaders pushes air filter and cooling system service ahead of the standard interval. Check coolant freeze protection each season and drain fuel tank water regularly, since these engines often sit idle between jobs and between seasons.
3013 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 156-1200 | Filter Element-Fuel | Fuel system service | Check fitment → |
| 146-7472 | Filter Element As-Air | Air intake service | Check fitment → |
| 146-7473 | Filter Element As-Air | Air intake service | Check fitment → |
| 146-6388 | Filter Element-Cab Air | Air intake service | Check fitment → |
| 150-4140 | Filter Element-Engine Oil | Lubrication service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
3013 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| Oil Pressure Warning Lamp (red oil-can symbol) | Engine oil pressure below safe threshold | Low oil level, failed oil pressure sensor/switch, clogged oil pickup, worn oil pump or bearings | Shut engine down immediately, check oil level, inspect pressure sensor and wiring before restarting |
| Coolant Temperature Warning Lamp (red thermometer symbol) | Engine coolant temperature above normal operating range | Low coolant level, blocked radiator fins, slipping or broken fan belt, failed thermostat or temperature sender | Idle down and stop engine safely, let cool, check coolant level and radiator for debris/blockage |
| Glow Plug / Preheat Indicator Lamp (coil symbol) | Cold-start preheat cycle active or completed | Normal cold-start cycle; lamp staying on, flickering, or failing to light points to weak glow plugs, bad relay, or blown preheat fuse | Wait for lamp to extinguish before cranking; if inoperative, check preheat fuse, relay, and glow plug resistance |
| Battery / Charge Warning Lamp (battery symbol) | Alternator not charging the battery | Loose or worn alternator belt, faulty alternator, corroded or loose wiring connection | Check belt tension and condition, inspect alternator output and battery terminals |
| Air Filter Restriction Indicator | Intake air filter restriction beyond limit | Dirty or clogged air filter element, collapsed intake hose | Inspect air filter element and housing, clean or replace element, check intake ducting for damage |
| Hydraulic Oil Temperature Warning Lamp | Hydraulic system oil temperature above normal range | Low hydraulic fluid level, clogged oil cooler, sustained high-load operation | Check hydraulic fluid level, inspect cooler core for debris, reduce load and let system cool |
| Fuel Level Low Warning Lamp | Fuel tank level low | Fuel supply near empty | Refuel and bleed fuel system if engine has run dry |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
3013 attachments & work tools
Machine type and attachment scope
The 3013 (3013C, engine designation C1.5) is a compact three-cylinder industrial diesel engine, not a self-contained work machine with its own attachment lineup. It is sold as a power unit fitted into other manufacturers' equipment, so there is no bucket, coupler, or work-tool catalog specific to it the way there is for an excavator or loader model.
Flywheel housing and PTO provision
Offered with a choice of SAE-standard flywheel housing and backplate arrangements plus provision for a power take-off (PTO) drive, used to run a driven pump, generator, or compressor end. The exact SAE housing number quoted varies by configuration/series across factory literature, so confirm the housing size against the specific engine arrangement or serial number.
Aspiration configuration
Most current factory spec sheets for this displacement class list the engine as naturally aspirated only. Some parts and engine-spec references describe a turbocharged variant as well, so aspiration is another point that varies by configuration/series and should be checked against the arrangement number rather than assumed.
Coupling and mounting to driven equipment
Because this is a bare industrial engine, connection to driven equipment is through the SAE flywheel and housing bolt pattern rather than a quick-attach or pin-grab coupler system. OEM integrators build their own mounting frames, isolators, and drive couplings around the engine for each end application.
Typical end-use machine fitments
This engine class has powered small mini excavators in the 302.5/303.5 size range, utility compactors and rollers, portable generator sets, pumps, compressors, and light construction and agricultural equipment. These are the machines the engine is installed in, not attachments that mount to it.
Cooling arrangement options
Standard cooling uses a belt-driven jacket-water coolant pump. Factory-offered variations for industrial and genset installs typically include a choice of cooling fan and, on some builds, a remote radiator or heat-exchanger cooling package selected to match the enclosure or ducting of the host machine.
Guarding and enclosure options
Belt guards, exhaust guarding, and noise/weather enclosures for this engine class are generally specified and fitted by the OEM building the end machine or genset rather than sold as a Caterpillar work-tool option for the bare engine.
All 3013 assemblies by section
Every catalogued assembly group for the Caterpillar 3013. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
154-2623 Air Cleaner Gp
| 15***23 | Air Cleaner Group | 1 |
| 15***55 | Hose-Air | 1 |
| 15***84 | Bracket As | 1 |
229-6872 Air Cleaner Gp
| 14***90 | Band-Mounting | 1 |
| 14***72 | Filter Element As-Air; (Primary)(Primary) | 1 |
| 14***73 | Filter Element As-Air; (Secondary)(Inner) | 1 |
161-8277 Manifold Gp-Exhaust
| 15***60 | Nut | 2 |
| 15***61 | Bolt | 4 |
| 16***77 | Manifold Group-Exhaust | 1 |
156-6956 Manifold Gp-Exhaust
| 15***60 | Nut | 2 |
| 15***61 | Bolt | 4 |
| 15***56 | Manifold Group-Exhaust | 1 |
156-7000 Manifold Gp-Inlet
| 15***62 | Bolt | 4 |
| 15***73 | Pin | 2 |
| 15***22 | Washer | 2 |
253-4367 Muffler & Converter
| 25***67 | Muffler & Converter | 1 |
154-2620 Muffler Gp
| 14***53 | Bolt; (M14x1.5x30-mm) | 2 |
| 15***57 | Washer; (15.5x32x8-mm Thk) | 2 |
| 15***20 | Gasket | 1 |
Basic Engine
156-6995 Camshaft Gp
| 15***92 | Key-Woodruff | 1 |
| 15***06 | Spacer | 3 |
| 15***07 | Gear-Camshaft; (22-Teeth) | 1 |
254-6041 Cover Gp-Valve Mechanism
| 15***33 | Seal; (Engine Oil Filler Cap) | 1 |
| 15***34 | Nut | 3 |
| 15***36 | Washer | 3 |
156-6974 Crankshaft Gp
| 15***18 | Key | 1 |
| 15***19 | Pin | 1 |
| 15***02 | Gear-Crankshaft; (33-Teeth) | 1 |
156-6966 Cylinder Block Gp
| 15***86 | Plug | 4 |
| 15***87 | Plug | 2 |
| 15***90 | Ball Bearing | 1 |
183-1166 Cylinder Block Gp
| 18***66 | Cylinder Block Group | 1 |
| 23***15 | Plug; (Sealing) | 1 |
| 23***16 | Plug; (Sealing) | 4 |
156-6975 Cylinder Block Gp
| 15***81 | Plug | 1 |
| 15***82 | Plug | 1 |
| 15***84 | Plug | 4 |
286-9554 Cylinder Head Gp
| 15***54 | Seal | 3 |
| 15***56 | Pin-Cotter | 12 |
| 15***57 | Cap | 6 |
254-6035 Cylinder Head Gp
| 15***73 | Cap | 6 |
| 15***44 | Stud | 2 |
| 15***88 | Bolt | 11 |
161-8262 Flywheel Gp
| 15***69 | Bolt | 1 |
| 15***06 | Bolt | 1 |
| 15***59 | Flywheel As | 1 |
156-6946 Housing Gp-Front
| 15***60 | Nut | 1 |
| 15***62 | Bolt | 3 |
| 15***38 | Bolt | 2 |
154-1877 Lifting Gp-Engine
| 15***75 | Bolt | 2 |
| 15***77 | Lifting Group-Engine | 1 |
| 19***73 | Plate; (Front) | 1 |
162-6446 Mounting Gp-Engine
| 12***80 | Washer; (Overload) | 4 |
| 12***81 | Washer; (Rebound) | 4 |
| 14***53 | Bolt; (M14x1.5x30-mm) | 8 |
213-8926 Mounting Gp-Engine
| 15***20 | Gasket | 1 |
| 15***56 | Bracket As; (Rh) | 1 |
| 15***57 | Bracket As; (Lh) | 1 |
160-9543 Mounting Gp-Engine
| 14***53 | Bolt; (M14x1.5x30-mm) | 8 |
| 15***56 | Bracket As; (Rh) | 1 |
| 15***57 | Bracket As; (Lh) | 1 |
161-8251 Mounting Gp-Fan
| 15***61 | Bolt | 4 |
| 16***51 | Mounting Group-Fan | 1 |
| 16***59 | Fan; (6-Blade) | 1 |
200-8130 Pan Gp-Oil
| 15***32 | Washer | 2 |
| 15***33 | Bolt | 27 |
| 15***35 | Seal-O-Ring | 1 |
156-6979 Piston & Rod Gp
| 15***69 | Bushing | 1 |
| 15***70 | Bolt | 2 |
| 15***71 | Nut | 2 |
156-6998 Pulley Gp-Crankshaft
| 15***92 | Nut | 4 |
| 15***92 | Key-Woodruff | 1 |
| 15***94 | Gasket | 1 |
254-6049 Valve Mechanism Gp
| 15***77 | Lever-Lh | 3 |
| 15***79 | Lever-Rh | 3 |
| 15***86 | Spring | 2 |
Cooling System
161-8283 Pump Gp-Water
| 15***60 | Nut | 3 |
| 15***61 | Bolt | 4 |
| 15***56 | Bolt | 2 |
156-6944 Pump Gp-Water
| 15***60 | Nut | 3 |
| 15***61 | Bolt | 4 |
| 15***67 | Cock; (Coolant Drain) | 1 |
311-0053 Pump Gp-Water
| 15***17 | Plug | 1 |
| 15***18 | Plate | 1 |
| 15***20 | Bolt | 3 |
154-1816 Pump Gp-Water
| 15***16 | Pump Group-Water | 1 |
| 15***17 | Plug | 1 |
| 15***18 | Plate | 1 |
154-2622 Radiator Gp
| 11***76 | Seal; (5.5-cm Each) | 0 |
| 12***74 | Cap-Radiator; (Sea Water Heat Exchanger) | 1 |
| 12***75 | Valve As | 1 |
Electrical And Starting System
154-2664 Alarm Gp-Travel
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 14***40 | Screw-Machine; (M3x0.5x40-mm)(M3x0.5x40mm) | 2 |
154-2658 Alternator Gp-Charging
| 14***52 | Alternator Group-Charging | 1 |
| 14***57 | Bracket As | 1 |
| 15***58 | Alternator Group-Charging | 1 |
154-2597 Battery & Wiring Gp
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 10***20 | Plug As-Connector; (2-Pin) | 1 |
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 10 |
231-2858 Battery & Wiring Gp
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 8 |
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 6 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
207-5262 Electronics Gp-Machine -Security
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 15***55 | Control Group-Unprogrammed; -Machine Security System | 1 |
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
222-5635 Fuse Gp -Radio
| 11***90 | Fuse; (10 Amp) | 1 |
| 22***35 | Fuse Group; -Radio | 1 |
155-8072 Glow Plug Gp
| 15***72 | Glow Plug Group | 1 |
| 15***73 | Support-Plug | 1 |
| 15***75 | Wire | 1 |
190-3599 Glow Plug Gp
| 15***76 | Nut | 1 |
| 15***77 | Washer | 1 |
| 17***85 | Glow Plug | 3 |
199-4002 Installation Gp-Security
| 09***47 | Nut-Thin; (M16x2 Thd) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
212-9347 Lamp Gp-Flood -Vertical
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 17***91 | Bracket Assem. | 1 |
| 17***92 | Body Assem. | 1 |
146-6366 Lamp Gp-Flood -12-Volt
| 14***66 | Lamp Group-Flood; -12-Volt | 1 |
| 15***54 | Lens As; (Flood) | 1 |
| 15***55 | Body As | 1 |
309-1325 Lamp Gp-Warning Beacon -Amber
| 27***00 | Lens; (Amber)(Warning Beacon) | 1 |
| 30***25 | Lamp Group-Warning Beacon; -12-Volt, Amber | 1 |
| 9R***42 | Plug As | 1 |
146-6419 Lighting Gp-Cab
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 14***19 | Lighting Group-Cab | 1 |
154-2652 Lighting Gp-Flood -1-Lamp, Boom
| 14***66 | Lamp Group-Flood; -12-Volt | 1 |
| 15***52 | Lighting Group-Flood; -1-Lamp, Boom | 1 |
| 15***88 | Harness As-Lighting; (Lighting) | 1 |
149-7847 Lighting Gp-Flood -Boom
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***66 | Lamp Group-Flood; -12-Volt | 1 |
| 14***47 | Lighting Group-Flood; -Boom | 1 |
160-9552 Lighting Gp-Flood
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 15***61 | Wedge-Plug Lock; (2-Pin) | 2 |
152-8151 Lighting Gp-Warning Beacon
| 15***51 | Lighting Group-Warning Beacon | 1 |
| 30***25 | Lamp Group-Warning Beacon; -12-Volt, Amber | 1 |
154-2659 Starting Motor Gp-Electric
| 14***66 | Starting Motor Group-Electric | 1 |
| 15***59 | Starting Motor Group-Electric; -Includes Mounting | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
161-8270 Switch Gp-Pressure
| 15***17 | Switch Group-Pressure; (Engine Oil) | 1 |
| 15***35 | Seal-O-Ring | 1 |
| 16***70 | Switch Group-Pressure; -Oil | 1 |
203-3630 Wiring Gp-Cab
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
145-8236 Wiring Gp-Cab
| 08***77 | Lamp Group-Dome; (12-Volt) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 12***17 | Terminal-Receptacle | 1 |
145-8237 Wiring Gp-Cab
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
Engine Arrangement
145-6694 Engine Ar-Primary
| 14***94 | Engine Ar-Primary, Roller Bearing; Replaces 421726a1, Roller Bearing | 1 |
| 15***77 | Lifting Group-Engine | 1 |
| 15***87 | Pump Group-Fuel Transfer | 1 |
266-3055 Engine Ar-Primary
| 15***77 | Lifting Group-Engine | 1 |
| 15***87 | Pump Group-Fuel Injection | 1 |
| 15***98 | Governor Group | 1 |
151-8463 Installation Ar-Engine
| 15***63 | Installation Ar-Engine | 1 |
| 15***20 | Muffler Group | 1 |
| 15***22 | Radiator Group | 1 |
Frame And Body
168-5032 Counterweight Gp
| 16***32 | Counterweight Group | 1 |
| 16***33 | Counterweight | 1 |
| 17***31 | Seal | 1 |
154-2678 Cover Gp-Side -Lh
| 14***50 | Bracket | 1 |
| 15***78 | Cover Group-Side; -Lh | 1 |
| 18***13 | Support As | 1 |
154-2679 Cover Gp-Side -Rh
| 12***86 | Lock As-Cylinder | 1 |
| 14***38 | Spring | 1 |
| 14***80 | Angle | 1 |
154-2625 Frame Gp-Swing
| 14***40 | Shim; (2.5-mm Thk) | 2 |
| 14***41 | Shim; (1-mm Thk) | 2 |
| 14***43 | Seal-Dust | 2 |
230-5713 Frame Gp-Swing
| 14***40 | Shim; (2.5-mm Thk) | 3 |
| 14***41 | Shim; (1-mm Thk) | 2 |
| 15***99 | Shim; (0.6-mm Thk)(0.6mm Thk) | 6 |
154-2593 Frame Gp-Upper
| 11***76 | Seal; (5.5-cm Each) | 0 |
| 14***28 | Cover As | 1 |
| 14***29 | Cover As | 1 |
146-6393 Handhold Gp
| 14***93 | Handhold Group | 1 |
| 15***50 | Handrail | 1 |
| 9X***40 | Screw-Truss Head; (M10x1.5x25-mm) | 2 |
169-0583 Hood Gp
| 09***92 | Locknut; (M6x1-Thd) | 1 |
| 12***43 | Seal; (70-cm) | 0 |
| 12***86 | Lock As-Cylinder | 1 |
202-0746 Insulation Gp-Heat
| 20***34 | Insulation | 1 |
| 20***35 | Insulation | 1 |
| 20***36 | Insulation | 1 |
202-0745 Insulation Gp-Heat
| 20***33 | Insulation | 1 |
| 20***34 | Insulation | 1 |
| 20***35 | Insulation | 1 |
209-7597 Insulation Gp-Heat
| 16***90 | Plate | 1 |
| 20***39 | Insulation | 1 |
| 20***40 | Insulation | 1 |
222-6408 Insulation Gp-Heat
| 20***39 | Insulation | 1 |
| 20***40 | Insulation | 1 |
| 20***42 | Insulation | 1 |
154-2602 Lines Gp-Grease
| 15***02 | Lines Group-Grease | 1 |
| 16***09 | Tube As | 1 |
| 16***10 | Tube As | 1 |
211-6494 Panel Gp-Sound Suppression -Canopy
| 15***20 | Gasket | 1 |
| 20***45 | Insulation Group-Heat | 1 |
| 21***94 | Panel Group-Sound Suppression; -Canopy | 1 |
211-6493 Panel Gp-Sound Suppression -Cab
| 15***20 | Gasket | 1 |
| 20***46 | Insulation Group-Heat | 1 |
| 21***93 | Panel Group-Sound Suppression; -Cab | 1 |
Fuel System
154-2601 Control Gp-Governor
| 14***11 | Cover As | 1 |
| 14***90 | Bracket | 1 |
| 14***92 | Cable As | 1 |
162-5846 Control Gp-Governor
| 09***09 | Nut; (M16x2.0 Thd) | 2 |
| 09***35 | Washer-Hard | 3 |
| 13***04 | Washer-Bevel; (1.8mm Thk) | 4 |
154-2600 Filter & Lines Gp-Fuel
| 15***00 | Filter & Lines Group-Fuel | 1 |
| 15***75 | Bracket As | 1 |
| 16***14 | Tube As | 2 |
144-9962 Filter Gp-Water Sep & Fuel
| 11***01 | Bowl As-Water Collection | 1 |
| 11***18 | Ring-Retaining | 1 |
| 11***19 | Nut | 1 |
155-7998 Governor Gp
| 15***58 | Bolt | 2 |
| 15***60 | Nut | 3 |
| 15***83 | Pin | 1 |
176-7711 Pump & Mtg Gp-Fuel Transfer
| 15***73 | Bolt | 2 |
| 17***11 | Pump & Mtg Group-Fuel Transfer | 1 |
| 29***70 | Pump As-Fuel Transfer | 1 |
155-7987 Pump Gp-Fuel Injection
| 15***92 | Nut | 2 |
| 15***60 | Nut | 2 |
| 15***12 | Washer | 1 |
252-6987 Pump Gp-Fuel Injection
| 20***20 | Spring | 3 |
| 20***21 | Washer | 3 |
| 20***23 | Valve | 3 |
176-9954 Pump Gp-Fuel Prm & Prim Filter
| 12***59 | Pump Group-Fuel Priming | 1 |
| 12***62 | Bladder | 1 |
| 14***62 | Filter Group-Water Sep & Fuel | 1 |
154-2387 Pump Gp-Fuel Transfer
| 15***71 | Gasket | 1 |
| 15***72 | Bolt | 1 |
| 15***73 | Bolt | 1 |
209-4474 Tank Gp-Fuel
| 13***42 | Screw-Self-Tapping; (M5x2.3x18.8-mm) | 6 |
| 14***14 | Gasket | 1 |
| 14***10 | Plug As; (16.36mm Id) | 1 |
164-2120 Tank Gp-Fuel
| 11***53 | Cap-Fuel | 1 |
| 15***19 | Sender As; (Fuel) | 1 |
| 16***20 | Tank Group-Fuel | 1 |
154-2596 Tank Gp-Fuel
| 15***96 | Tank Group-Fuel | 1 |
| 20***74 | Tank Group-Fuel | 1 |
| 21***25 | Strap As | 1 |
Hydraulic System
9t-8157 Filter Gp-Oil
| 10***68 | Plug | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
154-2618 Cooler Gp-Hydraulic Oil
| 15***18 | Cooler Group-Hydraulic Oil | 1 |
| 16***96 | Cooler | 1 |
| 5P***16 | Washer; (Hard) (8.8x20.5x2mm Thk) | 4 |
166-2835 Cylinder Gp-Blade
| 14***67 | Bushing | 2 |
| 14***13 | Seal-Lip Type | 1 |
| 14***14 | Seal-U-Cup | 1 |
212-6335 Cylinder Gp-Blade
| 14***13 | Seal-Lip Type | 1 |
| 14***14 | Seal-U-Cup | 1 |
| 15***02 | Ring-Wear | 1 |
212-6337 Cylinder Gp-Boom
| 14***13 | Seal-Lip Type | 1 |
| 14***14 | Seal-U-Cup | 1 |
| 15***17 | Head | 1 |
179-4969 Cylinder Gp-Boom
| 14***69 | Bushing | 1 |
| 14***13 | Seal-Lip Type | 1 |
| 14***14 | Seal-U-Cup | 1 |
150-9211 Cylinder Gp-Boom
| 14***69 | Bushing | 2 |
| 14***13 | Seal-Lip Type | 1 |
| 14***14 | Seal-U-Cup | 1 |
212-6328 Cylinder Gp-Bucket
| 03***39 | Ring-Back-Up | 1 |
| 14***77 | Seal-U-Cup | 1 |
| 14***92 | Seal-Lip Type | 1 |
226-9959 Cylinder Gp-Bucket
| 03***39 | Ring-Back-Up | 1 |
| 14***77 | Seal-U-Cup | 1 |
| 14***92 | Seal-Lip Type | 1 |
151-3187 Cylinder Gp-Bucket
| 03***39 | Ring-Back-Up | 1 |
| 14***77 | Seal-U-Cup | 1 |
| 14***92 | Seal-Lip Type | 1 |
237-4079 Cylinder Gp-Stick
| 14***92 | Seal-Lip Type | 1 |
| 14***93 | Seal-U-Cup | 1 |
| 14***94 | Ring-Wear | 1 |
237-3542 Cylinder Gp-Stick
| 14***69 | Bushing | 2 |
| 14***92 | Seal-Lip Type | 1 |
| 14***93 | Seal-U-Cup | 1 |
212-6329 Cylinder Gp-Stick
| 14***69 | Bushing | 2 |
| 14***92 | Seal-Lip Type | 1 |
| 14***93 | Seal-U-Cup | 1 |
151-2460 Cylinder Gp-Stick
| 14***69 | Bushing | 2 |
| 14***92 | Seal-Lip Type | 1 |
| 14***93 | Seal-U-Cup | 1 |
151-1266 Cylinder Gp-Swing Boom
| 14***67 | Bushing | 2 |
| 14***13 | Seal-Lip Type | 1 |
| 14***14 | Seal-U-Cup | 1 |
172-4223 Cylinder Gp-Swing Boom
| 14***67 | Bushing | 2 |
| 14***13 | Seal-Lip Type | 1 |
| 14***14 | Seal-U-Cup | 1 |
212-6336 Cylinder Gp-Swing Boom
| 14***13 | Seal-Lip Type | 1 |
| 14***14 | Seal-U-Cup | 1 |
| 15***02 | Ring-Wear | 1 |
244-3074 Cylinder Gp-Tilt -Bucket
| 14***80 | Seal-Lip Type | 1 |
| 14***81 | Seal-U-Cup | 1 |
| 14***82 | Ring-Wear | 1 |
161-2487 Drain Gp-Ecology
| 10***39 | Plug As-Drain; (Hydraulic Tank) | 1 |
| 15***27 | Tube As-Drain | 1 |
| 16***87 | Drain Group-Ecology | 1 |
151-8461 Hydraulic Ar
| 14***59 | Control & Mtg Group-Joystick | 1 |
| 15***61 | Hydraulic Ar | 1 |
| 15***83 | Lines Group-Pilot | 1 |
250-2923 Hydraulic Ar -Boom,Check Valve
| 22***86 | Lines Group-Stick | 1 |
| 24***54 | Lines Group-Boom Cylinder | 1 |
| 25***23 | Hydraulic Ar; -Boom,Check Valve | 1 |
250-2924 Hydraulic Ar -Boom, Stick
| 22***86 | Lines Group-Stick | 1 |
| 24***52 | Lines Group-Boom | 1 |
| 25***24 | Hydraulic Ar; -Boom, Stick | 1 |
242-8870 Hydraulic Ar -Check Valve
| 23***37 | Lines Group-Stick; -Lowering Control | 1 |
| 24***54 | Lines Group-Boom Cylinder | 1 |
| 24***70 | Hydraulic Ar; -Check Valve | 1 |
257-5567 Lines Gp-Auxiliary Hydraulic -Standard Stick, 2-Way
| 14***67 | Connector | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
| 14***42 | Connector Group | 1 |
225-0025 Lines Gp-Auxiliary Hydraulic
| 14***67 | Connector | 1 |
| 15***17 | Cap-Dust | 1 |
| 15***18 | Cap-Dust | 1 |
232-1577 Lines Gp-Auxiliary Hydraulic -2-Way
| 14***67 | Connector | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
| 14***75 | Elbow Group | 1 |
242-7000 Lines Gp-Auxiliary Hydraulic -Long Stick
| 14***67 | Connector | 1 |
| 15***17 | Cap-Dust | 1 |
| 15***18 | Cap-Dust | 1 |
245-4688 Lines Gp-Auxiliary Hydraulic -Long Stick, 2-Way
| 14***67 | Connector | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
| 14***42 | Connector Group | 1 |
242-7001 Lines Gp-Auxiliary Hydraulic -Long Stick
| 14***67 | Connector | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
| 14***75 | Elbow Group | 1 |
154-2629 Lines Gp-Blade
| 15***86 | Hose As | 1 |
| 15***87 | Hose As | 1 |
| 15***29 | Lines Group-Blade | 1 |
240-2452 Lines Gp-Boom
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 3 |
| 14***38 | Adapter, -6 Orb / Orfs X-Long | 1 |
| 14***67 | Elbow Group; (Each Includes) | 2 |
242-8854 Lines Gp-Boom Cylinder
| 14***28 | Connector Assem. | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***38 | Adapter, -6 Orb / Orfs X-Long | 1 |
154-2669 Lines Gp-Boom Cylinder
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***38 | Adapter, -6 Orb / Orfs X-Long | 1 |
| 15***43 | Connector As. | 1 |
154-2646 Lines Gp-Bucket
| 06***58 | Clamp | 2 |
| 15***98 | Hose As | 2 |
| 15***46 | Lines Group-Bucket | 1 |
225-0004 Lines Gp-Bucket -Long Stick
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
| 22***04 | Lines Group-Bucket; -Long Stick | 1 |
154-2673 Lines Gp-Bucket
| 06***58 | Clamp | 2 |
| 15***73 | Lines Group-Bucket | 1 |
| 15***58 | Tube As | 1 |
225-0001 Lines Gp-Bucket
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
| 22***01 | Lines Group-Bucket | 1 |
154-2650 Lines Gp-Bucket -2nd Auxiliary
| 15***43 | Connector As. | 1 |
| 15***81 | Fitting As; (Quick Disconnect, Male) | 2 |
| 15***50 | Lines Group-Bucket; -2nd Auxiliary | 1 |
235-2359 Lines Gp-Bucket Cylinder -2nd Auxiliary
| 08***02 | Bulkhead Adaptor | 1 |
| 11***61 | Seal Kit; (Includes Seals, Thrust Ring, Stem And Connectors) | 1 |
| 13***54 | Screw-Truss Head; (M4x0.7x10-mm) | 4 |
235-5784 Lines Gp-Bucket Cylinder -2nd Auxiliary, Long Stick
| 08***02 | Bulkhead Adaptor | 1 |
| 11***61 | Seal Kit; (Includes Seals, Thrust Ring, Stem And Connectors) | 1 |
| 13***54 | Screw-Truss Head; (M4x0.7x10-mm) | 4 |
251-1912 Lines Gp-Bucket Tilt Cylinder -Tiltable Bucket
| 14***25 | Connector | 1 |
| 15***41 | Block | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
154-2609 Lines Gp-Front
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***38 | Adapter, -6 Orb / Orfs X-Long | 2 |
| 15***43 | Connector As. | 1 |
236-3836 Lines Gp-Front
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***38 | Adapter, -6 Orb / Orfs X-Long | 2 |
| 15***58 | Connector As | 1 |
154-2613 Lines Gp-Hydraulic Pump
| 09***03 | Seal-O-Ring | 1 |
| 14***54 | Clamp | 2 |
| 14***76 | Plate | 1 |
211-3510 Lines Gp-Hydraulic Pump
| 09***03 | Seal-O-Ring | 1 |
| 14***54 | Clamp | 2 |
| 14***76 | Plate | 1 |
154-2660 Lines Gp-Load Control Valve
| 14***28 | Connector Assem. | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***38 | Adapter, -6 Orb / Orfs X-Long | 1 |
153-8283 Lines Gp-Pilot
| 14***86 | Manifold Group-Control; -Pilot, Travel Speed | 1 |
| 14***16 | Connector Group | 5 |
| 14***25 | Connector As. | 4 |
196-2719 Lines Gp-Pilot
| 14***16 | Connector Group | 2 |
| 14***25 | Connector As. | 11 |
| 14***68 | Elbow Group | 4 |
154-2675 Lines Gp-Pilot
| 15***72 | Hose As | 1 |
| 15***74 | Hose As | 1 |
| 15***78 | Hose As | 1 |
196-2720 Lines Gp-Pilot
| 14***16 | Connector Group | 6 |
| 14***25 | Connector As. | 11 |
| 14***68 | Elbow Group | 4 |
154-2615 Lines Gp-Pilot
| 15***65 | Hose As | 1 |
| 15***67 | Hose As | 1 |
| 15***72 | Hose As | 1 |
211-2989 Lines Gp-Pilot
| 15***23 | Hose As | 1 |
| 21***89 | Lines Group-Pilot | 1 |
154-2612 Lines Gp-Return & Filter
| 03***02 | Elbow; (90 Degree) | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 3 |
| 14***05 | Adapter Group | 1 |
241-6059 Lines Gp-Return & Filter
| 03***02 | Elbow; (90 Degree) | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 3 |
| 14***05 | Adapter Group | 1 |
236-3837 Lines Gp-Stick -Lowering Control
| 14***28 | Connector Assem. | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
224-9986 Lines Gp-Stick
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
| 22***86 | Lines Group-Stick | 1 |
154-2627 Lines Gp-Stick Cylinder
| 06***58 | Clamp | 2 |
| 15***43 | Connector As. | 2 |
| 15***97 | Hose As | 2 |
154-2611 Lines Gp-Swing Motor
| 14***25 | Connector As. | 5 |
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 3 |
154-2610 Lines Gp-Travel Motor
| 14***98 | Swivel Group | 1 |
| 14***16 | Connector Group | 4 |
| 14***18 | Connector As | 4 |
154-2665 Lines Gp-Work Tool
| 14***67 | Connector | 2 |
| 15***17 | Cap-Dust | 1 |
| 15***18 | Cap-Dust | 1 |
144-5986 Manifold Gp-Control -Pilot, Travel Speed
| 09***19 | Seal-O-Ring (Id=15.80mm) | 2 |
| 09***22 | Bolt-Socket Head; (M5x0.8x10-mm) | 4 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
154-2608 Motor & Mtg Gp-Swing
| 14***40 | Motor Group-Swing | 1 |
| 15***08 | Motor & Mtg Group-Swing | 1 |
| 6V***00 | Bolt-Socket Head; (M12x1.75x35-mm) | 4 |
149-4540 Motor Gp-Swing
| 13***26 | Bolt | 3 |
| 13***58 | Bolt | 4 |
| 14***40 | Motor Group-Swing | 1 |
209-6664 Motor Gp-Travel
| 20***64 | Motor Group-Travel | 1 |
| 20***70 | Kit-Seal; (Travel Motor) | 1 |
146-5496 Motor Gp-Travel
| 14***67 | Cover | 1 |
| 14***68 | Gear | 4 |
| 14***69 | Gear | 1 |
156-5063 Mounting Gp-Bank Valve
| 14***16 | Shim; (0.4-mm Thk) | 1 |
| 14***18 | Washer; (21x29x1-mm Thk) | 3 |
| 14***24 | Bushing | 2 |
208-7067 Mounting Gp-Bank Valve
| 14***16 | Shim; (0.4-mm Thk) | 1 |
| 14***18 | Washer; (21x29x1-mm Thk) | 6 |
| 14***24 | Bushing | 6 |
169-1996 Plug Gp-Hydraulic Lines
| 16***60 | Plug | 2 |
| 16***96 | Plug Group-Hydraulic Lines | 1 |
| 6V***31 | Cap As; (Fitting) | 1 |
154-2616 Pump & Mtg Gp-Piston & Gear
| 14***62 | Flange-Nylon | 1 |
| 15***03 | Hub | 1 |
| 15***95 | Housing-Flywheel | 1 |
146-5494 Pump Gp-Piston & Gear
| 14***65 | Kit-Seal | 1 |
| 14***94 | Pump Group-Piston & Gear | 1 |
| 16***24 | Bolt; (M8 X 20 Thd) | 2 |
146-5498 Swivel Gp
| 09***19 | Seal-O-Ring (Id=59.60mm) | 1 |
| 09***16 | Ring-Retaining; (External) | 1 |
| 14***07 | Ring | 1 |
237-4075 Swivel Gp
| 23***75 | Swivel Group | 1 |
| 23***76 | Kit-Seal | 0 |
154-2661 Tank Gp-Hydraulic
| 15***61 | Tank Group-Hydraulic | 1 |
| 16***17 | Tank Group-Hydraulic | 1 |
| 17***05 | Bracket | 1 |
209-4475 Tank Gp-Hydraulic
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 6 |
| 13***56 | Seal-O-Ring | 1 |
| 14***25 | Connector As. | 1 |
163-4617 Tank Gp-Hydraulic
| 09***47 | Bolt; (M10x1.5x36-mm) | 2 |
| 09***14 | Seal-O-Ring (Id=9.80mm) | 4 |
| 09***17 | Seal-O-Ring (Id=13.80mm) | 4 |
209-8900 Valve & Lines Gp-Hyd Control
| 14***25 | Connector As. | 2 |
| 19***04 | Valve Group-Shutoff | 1 |
| 20***43 | Hose As | 1 |
154-2614 Valve & Mtg Gp-Bank
| 14***97 | Valve Group-Bank | 1 |
| 15***81 | Pin-Clevis | 8 |
| 15***14 | Valve & Mtg Group-Bank | 1 |
208-7082 Valve & Mtg Gp-Main Control
| 14***97 | Valve Group-Bank | 1 |
| 15***81 | Pin-Clevis | 8 |
| 16***83 | Link | 4 |
146-5497 Valve Gp-Bank
| 09***78 | Seal-O-Ring (Id=9.80mm) | 1 |
| 09***79 | Seal-O-Ring (Id=10.80mm) | 1 |
| 09***82 | Seal-O-Ring (Id=13.80mm) | 1 |
166-8227 Valve Gp-Load Control
| 16***27 | Valve Group-Load Control; -Tilt Cylinder | 1 |
| 17***35 | Kit-Seal; (Load Control Valve) | 1 |
194-4635 Valve Gp-Pilot
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***43 | Handle-Control | 1 |
| 15***70 | Kit-Pilot Valve; (Lever) | 1 |
164-2274 Valve Gp-Selector -2-Way
| 11***83 | Pin-Spring | 1 |
| 16***74 | Valve Group-Selector; -Joystick Pattern | 1 |
| 16***76 | Kit-Seal; (Select Valve) | 1 |
143-2269 Valve Gp-Solenoid -Boom Lowering
| 09***19 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***22 | Bolt-Socket Head; (M5x0.8x10-mm) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
Implements
224-9984 Boom Ar
| 21***36 | Cylinder Group-Swing Boom | 1 |
| 21***37 | Cylinder Group-Boom | 1 |
| 22***84 | Boom Ar | 1 |
151-8464 Boom Ar
| 15***11 | Cylinder Group-Boom | 1 |
| 15***66 | Cylinder Group-Swing Boom | 1 |
| 15***64 | Boom Ar | 1 |
224-9985 Boom Gp
| 14***32 | Shim; (0.5-mm Thk) | 2 |
| 14***63 | Cap | 2 |
| 16***66 | Cover | 1 |
154-2624 Boom Gp
| 13***27 | Seal-Dust | 4 |
| 14***32 | Shim; (0.5-mm Thk) | 2 |
| 14***33 | Shim; (1-mm Thk)(.5mm Thk) | 4 |
203-0764 Linkage Gp-Bucket -With Lifting Eye
| 13***27 | Seal-Dust | 8 |
| 14***33 | Shim; (1-mm Thk)(.5mm Thk) | 4 |
| 14***70 | Bushing | 2 |
225-4070 Linkage Gp-Bucket -With Lifting Eye
| 14***33 | Shim; (1-mm Thk)(.5mm Thk) | 4 |
| 16***20 | Pin | 2 |
| 22***70 | Linkage Group-Bucket; -With Lifting Eye | 1 |
225-4067 Linkage Gp-Bucket -Without Lifting Eye
| 14***33 | Shim; (1-mm Thk)(.5mm Thk) | 4 |
| 16***20 | Pin | 2 |
| 22***67 | Linkage Group-Bucket; -Without Lifting Eye | 1 |
154-2628 Linkage Gp-Bucket -Standard
| 13***27 | Seal-Dust | 8 |
| 14***33 | Shim; (1-mm Thk)(.5mm Thk) | 4 |
| 14***70 | Bushing | 1 |
151-8465 Stick Ar
| 15***60 | Cylinder Group-Stick | 1 |
| 15***87 | Cylinder Group-Bucket | 1 |
| 15***65 | Stick Ar | 1 |
154-2635 Stick Ar
| 15***26 | Stick Group-Hoe | 1 |
| 15***35 | Stick Ar | 1 |
| 15***46 | Lines Group-Bucket | 1 |
225-0002 Stick Ar -Long
| 22***02 | Stick Ar; -Long | 1 |
| 22***03 | Stick Group-Hoe; -Long | 1 |
| 22***59 | Cylinder Group-Bucket | 1 |
224-9999 Stick Ar
| 22***99 | Stick Ar | 1 |
| 22***00 | Stick Group-Hoe | 1 |
| 22***59 | Cylinder Group-Bucket | 1 |
154-2636 Stick Ar -Long
| 15***33 | Stick Group-Hoe; -Long | 1 |
| 15***36 | Stick Ar; -Long | 1 |
| 15***73 | Lines Group-Bucket | 1 |
231-0949 Stick Ar -Thumb
| 22***59 | Cylinder Group-Bucket | 1 |
| 23***49 | Stick Ar; -Thumb | 1 |
| 23***74 | Stick Group-Hoe; -Thumb | 1 |
231-0952 Stick Ar-Hoe -Thumb
| 22***59 | Cylinder Group-Bucket | 1 |
| 23***52 | Stick Ar-Hoe; -Thumb | 1 |
| 23***83 | Stick Group-Hoe; -Thumb | 1 |
225-0000 Stick Gp-Hoe
| 14***32 | Shim; (0.5-mm Thk) | 4 |
| 17***61 | Plug-Protective | 1 |
| 22***00 | Stick Group-Hoe | 1 |
154-2633 Stick Gp-Hoe -Long
| 13***27 | Seal-Dust | 8 |
| 14***32 | Shim; (0.5-mm Thk) | 4 |
| 14***33 | Shim; (1-mm Thk)(.5mm Thk) | 4 |
225-0003 Stick Gp-Hoe -Long
| 14***32 | Shim; (0.5-mm Thk) | 4 |
| 17***61 | Plug-Protective | 1 |
| 22***03 | Stick Group-Hoe; -Long | 1 |
231-0974 Stick Gp-Hoe -Thumb
| 14***32 | Shim; (0.5-mm Thk) | 4 |
| 17***61 | Plug-Protective | 1 |
| 23***15 | Pin | 1 |
231-0983 Stick Gp-Hoe -Thumb
| 14***32 | Shim; (0.5-mm Thk) | 4 |
| 17***61 | Plug-Protective | 1 |
| 23***15 | Pin | 1 |
154-2626 Stick Gp-Hoe
| 13***27 | Seal-Dust | 8 |
| 14***32 | Shim; (0.5-mm Thk) | 4 |
| 14***33 | Shim; (1-mm Thk)(.5mm Thk) | 4 |
246-0095 Tilt Gp
| 24***64 | Bearing-Sleeve | 2 |
| 24***95 | Tilt Group | 1 |
| 24***97 | Bracket As-Mounting | 1 |
246-0134 Tilt Gp
| 24***64 | Bearing-Sleeve | 2 |
| 24***34 | Tilt Group | 1 |
| 24***35 | Bracket As-Mounting | 1 |
Lubrication System
200-8146 Filter Gp-Engine Oil
| 15***92 | Nut | 4 |
| 15***36 | Washer | 4 |
| 15***79 | Stud-Hollow | 1 |
Machine Arrangement
151-8458 Chassis Ar
| 15***58 | Chassis Ar | 1 |
| 15***93 | Frame Group-Upper | 1 |
| 15***96 | Tank Group-Fuel | 1 |
148-8492 Common Ar
| 14***94 | Engine Ar-Primary, Roller Bearing; Replaces 421726a1, Roller Bearing | 1 |
| 14***92 | Common Ar | 1 |
| 15***58 | Chassis Ar | 1 |
Operator Station
159-2152 Adjuster Gp-Seat
| 15***52 | Adjuster Group-Seat | 1 |
197-2702 Bracket Gp-Door
| 19***02 | Bracket Group-Door | 1 |
| 20***74 | Plate | 1 |
| 8T***79 | Bolt; (M12x1.75x20mm)(To Turbocharder-Mounting Face) | 1 |
154-2648 Cab Ar
| 14***12 | Heater & Mtg Group-Cab | 1 |
| 14***14 | Filter Group-Cab Air | 1 |
| 15***42 | Washer Group-Window | 1 |
146-6404 Cab Gp-Enclosed Rops
| 10***11 | Screw-Machine; (3/8-16x0.75-In) | 1 |
| 11***84 | Bumper | 2 |
| 11***45 | Knob-Control | 1 |
160-9550 Cab Gp-Enclosed Rops
| 14***36 | Wiring Group-Cab | 1 |
| 14***49 | Door Group-Cab | 1 |
| 14***04 | Cab Group-Enclosed Rops | 1 |
154-2649 Canopy Ar-Open Rops
| 15***49 | Canopy Ar-Open Rops | 1 |
| 16***85 | Film Group | 1 |
| 18***36 | Film Group | 1 |
160-9551 Canopy Ar-Open Rops
| 14***37 | Wiring Group-Cab | 1 |
| 16***51 | Canopy Ar-Open Rops | 1 |
| 16***53 | Canopy Group-Open Rops | 1 |
201-7565 Canopy Gp-Open Rops
| 19***89 | Canopy Group-Open Rops | 1 |
| 20***65 | Canopy Group-Open Rops | 1 |
| 20***30 | Wiring Group-Cab | 1 |
198-6689 Canopy Gp-Open Rops
| 14***43 | Hook-Coat | 1 |
| 14***68 | Plug | 6 |
| 14***69 | Plug | 4 |
160-9553 Canopy Gp-Open Rops
| 14***25 | Window | 1 |
| 14***68 | Plug | 10 |
| 14***69 | Plug | 4 |
152-2765 Console Gp-Operator -Rh
| 13***65 | Bushing-Plastic | 2 |
| 14***77 | Box As | 1 |
| 15***65 | Console Group-Operator; -Rh | 1 |
152-2757 Console Gp-Operator -Lh
| 11***77 | Latch As-Rotary; (Rh) | 1 |
| 13***65 | Bushing-Plastic | 2 |
| 14***83 | Box As | 1 |
196-1731 Control & Mtg Gp-Joystick
| 15***41 | Lever | 1 |
| 19***34 | Valve Group-Pilot | 1 |
| 19***35 | Valve Group-Pilot | 1 |
149-3859 Control & Mtg Gp-Joystick
| 14***84 | Control Group-Joystick; -Lh | 1 |
| 14***85 | Control Group-Joystick; -Rh | 1 |
| 14***59 | Control & Mtg Group-Joystick | 1 |
160-0144 Control Gp-Blade
| 13***66 | Yoke | 1 |
| 16***44 | Control Group-Blade | 1 |
| 5C***74 | Nut (M5x.8 Thd); (M5x0.8-Thd) | 2 |
154-2631 Control Gp-Blade
| 15***81 | Pin-Clevis | 2 |
| 15***31 | Control Group-Blade | 1 |
| 16***44 | Control Group-Blade | 1 |
154-2605 Control Gp-Hydraulic Hand -Travel
| 09***32 | Knob; (Lh Travel Lever) | 1 |
| 09***33 | Knob; (Rh Travel Lever) | 1 |
| 12***40 | Boot | 2 |
144-5984 Control Gp-Joystick -Lh
| 14***84 | Control Group-Joystick; -Lh | 1 |
| 15***39 | Handle-Lh | 1 |
| 15***42 | Valve-Pilot; (Joystick) | 1 |
144-5985 Control Gp-Joystick -Rh
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***85 | Control Group-Joystick; -Rh | 1 |
| 15***42 | Valve-Pilot; (Joystick) | 1 |
199-5994 Door Gp-Cab
| 14***47 | Ring-Retaining | 1 |
| 14***54 | Hinge As | 2 |
| 14***57 | Gasket | 1 |
146-6349 Door Gp-Cab
| 14***47 | Ring-Retaining | 1 |
| 14***48 | Pin | 1 |
| 14***49 | Door Group-Cab | 1 |
227-2817 Door Gp-Cab
| 14***47 | Ring-Retaining | 1 |
| 14***48 | Pin | 1 |
| 14***54 | Hinge As | 2 |
147-3314 Filter Gp-Cab Air
| 14***88 | Filter Element-Cab Air; (Air) | 1 |
| 14***89 | Housing-Filter | 1 |
| 14***14 | Filter Group-Cab Air | 1 |
203-2311 Gauge Gp-Cluster
| 09***78 | Screw; (Pan Head) | 2 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 14***57 | Knob | 1 |
143-2267 Gauge Gp-Cluster
| 09***78 | Screw; (Pan Head) | 2 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 2 |
| 14***57 | Knob | 1 |
152-8255 Guard Gp-Cab
| 15***55 | Guard Group-Cab | 1 |
| 15***50 | Guard Group-Cab | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 2 |
149-7848 Guard Gp-Cab -Screen
| 14***48 | Guard Group-Cab; -Screen | 1 |
| 15***67 | Frame As | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 2 |
158-6350 Guard Gp-Cab
| 15***56 | Glass | 1 |
| 15***57 | Glass | 1 |
| 15***44 | Frame As | 1 |
146-6413 Guard Gp-Canopy
| 14***02 | Guard As | 1 |
| 14***13 | Guard Group-Canopy | 1 |
| 14***14 | Guard As | 1 |
213-6498 Guard Gp-Window -Front, Wire Mesh
| 15***67 | Frame As | 1 |
| 21***98 | Guard Group-Window; -Front, Wire Mesh | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 2 |
213-6499 Guard Gp-Window -Front, Glass
| 15***50 | Guard Group-Cab | 1 |
| 21***99 | Guard Group-Window; -Front, Glass | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 2 |
145-8912 Heater & Mtg Gp-Cab
| 11***91 | Fuse; (15-Ampere) | 1 |
| 14***12 | Heater & Mtg Group-Cab | 1 |
| 24***83 | Heater Group-Cab | 1 |
146-6387 Heater Gp-Cab
| 14***70 | Clip | 8 |
| 14***73 | Coil As | 1 |
| 14***74 | Valve As | 1 |
247-2583 Heater Gp-Cab
| 10***55 | Housing-Switch; (Lights) | 1 |
| 11***19 | Switch As-Rocker; (Blower Fan Speed)(Heater Fan) | 1 |
| 14***71 | Louver As | 2 |
146-6335 Heater Gp-Cab
| 10***55 | Housing-Switch; (Lights) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***19 | Switch As-Rocker; (Blower Fan Speed)(Heater Fan) | 1 |
149-7851 Installation Gp-Radio
| 10***81 | Cable As-Coaxial | 1 |
| 11***90 | Fuse; (10 Amp) | 1 |
| 14***51 | Installation Group-Radio | 1 |
222-5632 Installation Gp-Radio
| 10***81 | Cable As-Coaxial | 1 |
| 12***51 | Screw-Pan Head | 4 |
| 13***13 | Nut; (M4x0.7-Thd) | 4 |
218-1512 Installation Gp-Radio
| 21***12 | Installation Group-Radio | 1 |
| 22***32 | Installation Group-Radio | 1 |
| 22***35 | Fuse Group; -Radio | 1 |
146-6440 Liner Gp-Cab
| 10***55 | Cover-Speaker | 1 |
| 12***51 | Screw-Pan Head | 4 |
| 13***13 | Nut; (M4x0.7-Thd) | 4 |
160-9555 Liner Gp-Cab
| 14***43 | Hook-Coat | 1 |
| 14***25 | Cover | 1 |
| 16***55 | Liner Group-Cab | 1 |
154-2643 Lines Gp-Heater
| 15***43 | Lines Group-Heater | 1 |
| 1L***79 | Elbow-Pipe; (3/8 In Pipe) | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 3 |
236-1533 Mirror Gp-Rear View
| 13***66 | Mirror Group-Rear View | 1 |
| 14***71 | Clamp; (Top)(Top) | 1 |
| 14***72 | Clamp; (Bottom)(Bottom) | 1 |
236-1527 Mirror Gp-Rear View
| 13***66 | Mirror Group-Rear View | 1 |
| 14***71 | Clamp; (Top)(Top) | 1 |
| 14***72 | Clamp; (Bottom)(Bottom) | 1 |
146-6417 Mirror Gp-Rear View -Lh
| 13***66 | Mirror Group-Rear View | 1 |
| 14***17 | Mirror Group-Rear View; -Lh | 1 |
| 14***71 | Clamp; (Top)(Top) | 1 |
146-6418 Mirror Gp-Rear View -Rh
| 13***66 | Mirror Group-Rear View | 1 |
| 14***18 | Mirror Group-Rear View; -Rh | 1 |
| 14***71 | Clamp; (Top)(Top) | 1 |
330-5043 Motor Gp-Window Wiper
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
| 20***60 | Cover | 1 |
330-5032 Motor Gp-Window Wiper
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
| 26***23 | Cap-Wiper | 1 |
146-6431 Motor Gp-Window Wiper -12-Volt
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 14***31 | Motor Group-Window Wiper; -12-Volt | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
210-2353 Motor Gp-Window Wiper
| 14***31 | Motor Group-Window Wiper; -12-Volt | 1 |
| 20***60 | Cover | 1 |
| 21***53 | Motor Group-Window Wiper | 1 |
160-9559 Mounting Gp-Cab
| 09***59 | Bolt; (M14x2x60-mm) | 4 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***76 | Seal; (5.5-cm Each) | 0 |
170-9266 Mounting Gp-Control -Boom Swing Pedal
| 13***35 | Pin-Spring | 1 |
| 14***82 | Bracket As | 1 |
| 14***24 | Bushing | 2 |
202-3059 Mounting Gp-Platform
| 09***55 | Bolt; (M14x2x70-mm) | 2 |
| 16***41 | Plate As | 1 |
| 20***59 | Mounting Group-Platform | 1 |
160-9558 Mounting Gp-Platform
| 09***59 | Bolt; (M14x2x60-mm) | 4 |
| 14***96 | Lock Pin | 2 |
| 14***47 | Cover As | 1 |
151-8459 Operator Ar
| 15***59 | Operator Ar | 1 |
| 15***05 | Control Group-Hydraulic Hand; -Travel | 1 |
| 15***06 | Platform Group | 1 |
148-5165 Pedal Gp-Foot
| 14***65 | Pedal Group-Foot | 1 |
| 14***82 | Pedal As | 1 |
| 14***84 | Pedal As | 1 |
167-0919 Pedal Gp-Foot
| 12***58 | Pedal-Rubber | 2 |
| 13***14 | Cover As | 2 |
| 13***93 | Collar | 2 |
208-3563 Pedal Gp-Foot
| 13***30 | Bushing | 2 |
| 20***59 | Pedal As | 1 |
| 20***61 | Pedal As | 1 |
218-8135 Pedal Gp-Foot
| 21***35 | Pedal Group-Foot, Nut | 1 |
| 21***63 | Rod | 1 |
| 21***45 | Link As | 1 |
154-2606 Platform Gp
| 12***43 | Seal; (70-cm) | 0 |
| 15***06 | Platform Group | 1 |
| 15***68 | Plate As | 1 |
173-6530 Radio Gp -Am/Fm
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 13***65 | Bumper | 1 |
| 17***30 | Radio Group; -Am/Fm/Wb | 1 |
173-6532 Radio Gp -Am/Fm/Cassette
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 2 |
| 13***65 | Bumper | 1 |
| 17***32 | Radio Group; (Am/Fm-Cassette) | 1 |
154-8002 Seat Belt Gp
| 15***02 | Seat Belt Group | 1 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 2 |
| 8T***60 | Washer-Hard (For Use With 7/16 In Bolts) | 4 |
200-8082 Seat Belt Gp -Retractable
| 0T***44 | Bolt (1.25" Long) | 1 |
| 20***82 | Seat Belt Group; -Retractable | 1 |
| 7X***07 | Washer-Hard; (12x22.5x5-mm Thk) | 1 |
228-1587 Seat Belt Gp -Adjustable, 2-In, Suspension
| 22***87 | Seat Belt Group; -Adjustable, 2-In, Suspension | 1 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 2 |
| 8T***60 | Washer-Hard (For Use With 7/16 In Bolts) | 4 |
228-1598 Seat Belt Gp -Retractable, 2-In
| 0T***44 | Bolt (1.25" Long) | 1 |
| 22***98 | Seat Belt Group; -Retractable, 2-In | 1 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 3 |
154-8001 Seat Belt Gp
| 15***01 | Seat Belt Group | 1 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
| 8T***60 | Washer-Hard (For Use With 7/16 In Bolts) | 3 |
154-8005 Seat Belt Gp
| 15***05 | Seat Belt Group | 1 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 2 |
| 8T***60 | Washer-Hard (For Use With 7/16 In Bolts) | 4 |
228-1586 Seat Belt Gp -Adjustable, 2-In, Fixed Seat
| 22***86 | Seat Belt Group; -Adjustable, 2-In, Fixed Seat | 1 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
| 8T***60 | Washer-Hard (For Use With 7/16 In Bolts) | 3 |
228-1597 Seat Belt Gp -Retractable, 3-In
| 0T***44 | Bolt (1.25" Long) | 1 |
| 22***97 | Seat Belt Group; -Retractable, 3-In | 1 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 3 |
200-8083 Seat Belt Gp -Retractable
| 0T***44 | Bolt (1.25" Long) | 1 |
| 20***83 | Seat Belt Group; -Retractable | 1 |
| 7X***07 | Washer-Hard; (12x22.5x5-mm Thk) | 1 |
154-8003 Seat Belt Gp
| 15***03 | Seat Belt Group | 1 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 2 |
| 8T***60 | Washer-Hard (For Use With 7/16 In Bolts) | 4 |
149-2362 Seat Gp
| 14***16 | Bracket | 2 |
| 14***62 | Seat Group | 1 |
| 15***09 | Kit-Cover; (Adjustable Seat) | 1 |
145-4244 Seat Gp -Suspension
| 14***44 | Seat Group; -Suspension | 1 |
| 14***33 | Seat Group | 1 |
| 8T***89 | Bolt (20mm Long) 0 Degrees); (L=20mm) {For 5br, 6cr} | 4 |
147-1117 Seat Gp
| 14***17 | Seat Group | 1 |
| 14***16 | Bracket | 2 |
| 15***09 | Kit-Cover; (Adjustable Seat) | 1 |
150-4703 Seat Gp
| 14***17 | Seat Group | 1 |
| 15***03 | Seat Group | 1 |
| 8T***89 | Bolt (20mm Long) 0 Degrees); (L=20mm) {For 5br, 6cr} | 4 |
153-6625 Seat Gp
| 15***25 | Seat Group | 1 |
145-4245 Seat Gp -Static
| 14***45 | Seat Group; -Static | 1 |
| 14***62 | Seat Group | 1 |
| 8T***89 | Bolt (20mm Long) 0 Degrees); (L=20mm) {For 5br, 6cr} | 4 |
149-7333 Seat Gp
| 14***16 | Bracket | 2 |
| 14***33 | Seat Group | 1 |
| 15***25 | Seat Group | 1 |
154-2647 Support Gp-Seat
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***56 | Plug; (Switch) | 3 |
| 14***80 | Box-Console | 1 |
154-2676 Support Gp-Seat
| 10***08 | Bumper; (Conical) | 1 |
| 13***52 | Shaft As | 2 |
| 13***41 | Hinge | 3 |
208-5093 Support Gp-Seat
| 12***78 | Locknut; (M6x1-Thd) | 2 |
| 13***52 | Shaft As | 2 |
| 13***65 | Bushing-Plastic | 4 |
212-9334 Tank Gp-Window Washer
| 21***34 | Tank Group-Window Washer | 1 |
| 21***35 | Grommet; (Bottle) | 1 |
| 21***36 | Pump As | 1 |
150-9292 Tank Gp-Window Washer
| 15***92 | Tank Group-Window Washer | 1 |
| 15***00 | Pump As | 1 |
| 15***01 | Cap | 1 |
154-2642 Washer Gp-Window
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***36 | Connector | 1 |
| 15***92 | Tank Group-Window Washer | 1 |
229-1453 Window Gp-Cab
| 14***87 | Cushion | 1 |
| 15***45 | Guide-Lh | 2 |
| 15***46 | Guide-Rh | 2 |
150-5985 Window Gp-Cab -Front
| 09***33 | Bolt-Socket Head; (M5x0.8x20-mm) | 2 |
| 13***70 | Seal; (326-cm) | 0 |
| 13***85 | Rivet-Pop | 2 |
210-2354 Window Gp-Cab -Front
| 09***33 | Bolt-Socket Head; (M5x0.8x20-mm) | 2 |
| 13***85 | Rivet-Pop | 2 |
| 14***56 | Strip | 1 |
150-5986 Window Gp-Cab
| 14***87 | Cushion | 2 |
| 14***89 | Weatherstrip; (198-cm) | 0 |
| 15***86 | Window Group-Cab | 1 |
146-6436 Wiper Gp-Window
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***94 | Nozzle As-Washer | 1 |
| 14***46 | Clip | 1 |
218-0188 Wiper Gp-Window
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***94 | Nozzle As-Washer | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
Power Train
154-2607 Motor & Mtg Gp-Travel
| 14***96 | Motor Group-Travel | 2 |
| 15***07 | Motor & Mtg Group-Travel | 1 |
| 8T***39 | Capscrew; (Hex Hd) (M12 X 1.75 X 30l Gr 10.9) | 18 |
151-8460 Power Train Ar
| 15***60 | Power Train Ar | 1 |
| 15***07 | Motor & Mtg Group-Travel | 1 |
| 15***08 | Motor & Mtg Group-Swing | 1 |
140-4411 Sprocket Gp
| 14***22 | Sprocket; (21-Teeth) | 1 |
| 14***11 | Sprocket Group | 1 |
| 8T***39 | Capscrew; (Hex Hd) (M12 X 1.75 X 30l Gr 10.9) | 9 |
215-6595 Sprocket Gp
| 10***02 | Bolt-Socket Head; (M12x1.75x30-mm) | 9 |
| 14***22 | Sprocket; (21-Teeth) | 1 |
| 21***95 | Sprocket Group | 1 |
Service Equipment And Supplies
185-3339 Film Gp -Canopy
| 12***73 | Film-Identification; (Caterpillar) | 1 |
| 18***39 | Film Group; -Canopy | 1 |
| 22***03 | Film-Stripe; (Accent Red)(61-cm Each) | 0 |
237-6142 Film Gp
| 18***37 | Cartridge-Grease | 1 |
| 23***49 | Film-Identification; (Hewden, Rear) | 1 |
| 23***50 | Film-Stripe; (Rh) | 1 |
185-2624 Film Gp -Cab
| 12***73 | Film-Identification; (Caterpillar) | 1 |
| 16***05 | Film-Stripe; (302.5) | 1 |
| 18***24 | Film Group; -Cab | 1 |
161-1385 Film Gp
| 16***85 | Film Group | 1 |
| 16***02 | Film-Identification; (Cat, Lh) | 1 |
| 16***03 | Film-Identification; (Cat, Rh) | 1 |
185-3336 Film Gp
| 16***04 | Film; (302.5) | 1 |
| 18***36 | Film Group | 1 |
| 22***03 | Film-Stripe; (Accent Red)(61-cm Each) | 0 |
8f-9866 Grease Gun Gp
| 19***68 | Coupler-Grease | 1 |
| 19***69 | Hose As | 1 |
| 8F***66 | Grease Gun As | 1 |
179-0551 Kit-Preventive Maintenance
| 15***40 | Filter Element-Engine Oil; (Engine) | 1 |
| 15***00 | Filter Element-Fuel; (Water Separator) | 1 |
| 16***73 | Bottle Group-Fluid Sampling | 2 |
165-6099 Kit-Preventive Maintenance
| 15***40 | Filter Element-Engine Oil; (Engine) | 1 |
| 16***99 | Kit-Preventive Maintenance | 1 |
| 16***73 | Bottle Group-Fluid Sampling | 1 |
188-6171 Kit-Preventive Maintenance
| 15***40 | Filter Element-Engine Oil; (Engine) | 1 |
| 15***00 | Filter Element-Fuel; (Water Separator) | 1 |
| 16***73 | Bottle Group-Fluid Sampling | 4 |
147-3278 Plate & Film Gp
| 12***06 | Film-Warning; (Next To Radiator Fill Cap) | 1 |
| 14***78 | Plate & Film Group | 1 |
| 15***37 | Film-Warning; (Read Omm, Qcplr, Radio, Ether) | 1 |
190-9789 Plate & Film Gp -Norwegian
| 10***44 | Film-Warning; (Clearance) | 1 |
| 13***48 | Film-Warning; (Radiator Pressure) | 1 |
| 19***89 | Plate & Film Group; -Norwegian | 1 |
259-8869 Plate & Film Gp -Slovakian
| 22***79 | Film-Warning; (Electrocution) | 1 |
| 22***12 | Film; (Warning) (Jump Start) (On Outside Of Battery Compartment Door) | 1 |
| 22***57 | Film; (Warning) (Hot Fluid) (Next To Radiator Fill Cap) (On Forward Face Of Hydraulic Tank Above Filler Neck) | 1 |
165-6298 Plate & Film Gp -Czech
| 16***98 | Plate & Film Group; -Czech | 1 |
| 22***79 | Film-Warning; (Electrocution) | 1 |
| 22***12 | Film; (Warning) (Jump Start) (On Outside Of Battery Compartment Door) | 1 |
147-3280 Plate & Film Gp
| 12***39 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 14***80 | Plate & Film Group | 1 |
| 15***16 | Film-Warning; (Machine Operation)(Universal) | 1 |
147-3282 Plate & Film Gp
| 12***45 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 14***82 | Plate & Film Group | 1 |
| 15***25 | Film-Warning; (Universal) | 1 |
205-2952 Plate & Film Gp -German
| 12***41 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 15***21 | Film-Warning; (Universal) | 1 |
| 15***98 | Film-Warning; (Cable Connection) | 1 |
205-2959 Plate & Film Gp -Swedish
| 10***62 | Film-Warning; (Clearance) | 1 |
| 13***91 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 15***30 | Film-Warning; (Universal) | 1 |
259-8871 Plate & Film Gp -Slovenian
| 22***79 | Film-Warning; (Electrocution) | 1 |
| 22***12 | Film; (Warning) (Jump Start) (On Outside Of Battery Compartment Door) | 1 |
| 22***57 | Film; (Warning) (Hot Fluid) (Next To Radiator Fill Cap) (On Forward Face Of Hydraulic Tank Above Filler Neck) | 1 |
147-3286 Plate & Film Gp
| 10***62 | Film-Warning; (Clearance) | 1 |
| 13***91 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 14***86 | Plate & Film Group | 1 |
147-3281 Plate & Film Gp
| 12***41 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 14***81 | Plate & Film Group | 1 |
| 15***21 | Film-Warning; (Universal) | 1 |
205-2956 Plate & Film Gp -Dutch
| 12***44 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 15***26 | Film-Warning; (Universal) | 1 |
| 15***02 | Film-Warning; (Cable Connection) | 1 |
205-2961 Plate & Film Gp -Polish
| 15***82 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 17***46 | Film-Warning; (Clearance) | 1 |
| 17***58 | Film-Warning; (Universal) | 1 |
208-3720 Plate & Film Gp -Norwegian
| 10***44 | Film-Warning; (Clearance) | 1 |
| 13***48 | Film-Warning; (Radiator Pressure) | 1 |
| 19***74 | Film-Warning; (Jumper/Batteries) | 1 |
147-3279 Plate & Film Gp
| 10***45 | Film-Warning; (Clearance) | 1 |
| 13***90 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 14***79 | Plate & Film Group | 1 |
205-2953 Plate & Film Gp -Italian
| 12***42 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 15***22 | Film-Warning; (Universal) | 1 |
| 15***99 | Film-Warning; (Cable Connection) | 1 |
205-2955 Plate & Film Gp -Greek
| 12***45 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 15***25 | Film-Warning; (Universal) | 1 |
| 15***01 | Film-Warning; (Cable Connection) | 1 |
165-6299 Plate & Film Gp -Polish
| 15***82 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 16***99 | Plate & Film Group; -Polish | 1 |
| 17***46 | Film-Warning; (Clearance) | 1 |
147-3284 Plate & Film Gp
| 12***43 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 14***84 | Plate & Film Group | 1 |
| 15***20 | Film-Warning; (Machine Operation)(Universal) | 1 |
147-3285 Plate & Film Gp
| 12***40 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 14***85 | Plate & Film Group | 1 |
| 15***18 | Film-Warning; (Machine Operation)(Universal) | 1 |
175-0286 Plate & Film Gp -Quick Coupler
| 15***96 | Film-Notice; (Lift Eye Location) | 2 |
| 15***36 | Film-Warning; (Read Operation Manual) | 2 |
| 17***86 | Plate & Film Group; -Quick Coupler | 1 |
259-8754 Plate & Film Gp -Hungarian
| 22***79 | Film-Warning; (Electrocution) | 1 |
| 22***12 | Film; (Warning) (Jump Start) (On Outside Of Battery Compartment Door) | 1 |
| 22***57 | Film; (Warning) (Hot Fluid) (Next To Radiator Fill Cap) (On Forward Face Of Hydraulic Tank Above Filler Neck) | 1 |
154-2603 Plate & Film Gp
| 10***30 | Film; (Warning) (Accumulator Pressure) (On Bracket Covering Brake Accumulator) | 1 |
| 13***58 | Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap) | 1 |
| 15***79 | Plate-Identification; (Circuit Breaker) | 1 |
205-2950 Plate & Film Gp -Spanish
| 12***40 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 15***18 | Film-Warning; (Machine Operation)(Universal) | 1 |
| 15***96 | Film-Warning; (Cable Connection) | 1 |
205-2949 Plate & Film Gp -French
| 12***39 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 15***16 | Film-Warning; (Machine Operation)(Universal) | 1 |
| 15***95 | Film-Warning; (Cable Connection) | 1 |
151-0847 Plate & Film Gp
| 15***47 | Plate & Film Group | 1 |
147-3283 Plate & Film Gp
| 12***42 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 14***83 | Plate & Film Group | 1 |
| 15***22 | Film-Warning; (Universal) | 1 |
147-3276 Plate & Film Gp -Danish
| 12***46 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 14***76 | Plate & Film Group; -Danish | 1 |
| 15***23 | Film-Warning; (Universal) | 1 |
259-8873 Plate & Film Gp -Polish
| 22***79 | Film-Warning; (Electrocution) | 1 |
| 22***12 | Film; (Warning) (Jump Start) (On Outside Of Battery Compartment Door) | 1 |
| 22***57 | Film; (Warning) (Hot Fluid) (Next To Radiator Fill Cap) (On Forward Face Of Hydraulic Tank Above Filler Neck) | 1 |
205-2960 Plate & Film Gp -Finnish
| 10***45 | Film-Warning; (Clearance) | 1 |
| 13***90 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 15***40 | Film-Warning; (Universal) | 1 |
205-2957 Plate & Film Gp -Czech
| 20***57 | Plate & Film Group; -Czech | 1 |
| 22***79 | Film-Warning; (Electrocution) | 1 |
| 22***12 | Film; (Warning) (Jump Start) (On Outside Of Battery Compartment Door) | 1 |
205-2951 Plate & Film Gp -Portuguese
| 12***43 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 15***20 | Film-Warning; (Machine Operation)(Universal) | 1 |
| 15***97 | Film-Warning; (Cable Connection) | 1 |
205-2954 Plate & Film Gp -Danish
| 12***46 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 15***23 | Film-Warning; (Universal) | 1 |
| 15***00 | Film-Warning; (Cable Connection) | 1 |
147-3294 Plate & Film Gp
| 13***88 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 14***94 | Plate & Film Group | 1 |
| 15***27 | Film-Warning; (Universal) | 1 |
147-3277 Plate & Film Gp -Dutch
| 12***44 | Film-Warning; (Hot Fluid Under Pressure) | 1 |
| 14***77 | Plate & Film Group; -Dutch | 1 |
| 15***26 | Film-Warning; (Universal) | 1 |
205-2948 Plate & Film Gp
| 12***06 | Film-Warning; (Next To Radiator Fill Cap) | 1 |
| 15***37 | Film-Warning; (Read Omm, Qcplr, Radio, Ether) | 1 |
| 15***30 | Film-Warning; (Cable Connection) | 1 |
156-4201 Tool Gp-Hand
| 15***01 | Tool Group-Hand | 1 |
180-8217 Tool Gp-Hand
| 15***01 | Tool Group-Hand | 1 |
| 18***44 | Cable-Lock | 1 |
| 18***17 | Tool Group-Hand | 1 |
Undercarriage
140-4020 Cylinder Gp-Idler -Rh
| 09***01 | Seal-O-Ring (Id=34.70mm) | 1 |
| 12***65 | Valve | 1 |
| 12***84 | Plate As | 1 |
140-4013 Cylinder Gp-Idler -Lh
| 09***01 | Seal-O-Ring (Id=34.70mm) | 1 |
| 12***65 | Valve | 1 |
| 12***84 | Plate As | 1 |
140-4495 Frame Gp-Undercarriage
| 14***35 | Cover | 1 |
| 14***67 | Cover | 1 |
| 14***68 | Cover | 1 |
140-4412 Gear & Bearing Gp-Swing
| 14***12 | Gear & Bearing Group-Swing | 1 |
| 14***86 | Dowel | 1 |
| 17***63 | Bolt; (M16x1.5x35-mm) | 26 |
140-4002 Idler Gp-Front
| 13***64 | Seal | 1 |
| 14***02 | Idler Group-Front | 1 |
| 14***03 | Support-Lh | 1 |
140-4009 Idler Gp-Front -Rh
| 13***64 | Seal | 1 |
| 14***03 | Support-Lh | 1 |
| 14***04 | Support-Rh | 1 |
140-4410 Idler Gp-Front
| 14***02 | Idler Group-Front | 1 |
| 14***09 | Idler Group-Front; -Rh | 1 |
| 14***10 | Spring Group-Recoil | 2 |
153-6027 Roller Gp-Track
| 08***93 | Plug; (1/8"Thd) | 1 |
| 14***38 | Seal-Oil | 2 |
| 14***64 | Roller As; (Carrier) | 2 |
140-4010 Spring Gp-Recoil
| 13***47 | Nut; (M20x1.5-Thd) | 1 |
| 13***62 | Rod | 1 |
| 14***39 | Spring | 1 |
153-6028 Track Gp
| 14***13 | Guard As; (Lh) | 2 |
| 14***14 | Guard As; (Rh) | 2 |
| 15***85 | Track Group; -Steel | 2 |
154-2645 Track Gp -Rubber
| 15***45 | Track Group; -Rubber | 1 |
| 32***05 | Track As; (Rubber) | 2 |
151-8462 Undercarriage Ar
| 14***10 | Idler Group-Front | 1 |
| 14***12 | Gear & Bearing Group-Swing | 1 |
| 14***95 | Frame Group-Undercarriage | 1 |
Work Tools
154-2630 Blade & Mounting Gp
| 13***27 | Seal-Dust | 4 |
| 14***48 | Cover | 1 |
| 14***16 | Blade As | 1 |
151-8467 Blade Ar
| 15***67 | Blade Ar | 1 |
| 15***29 | Lines Group-Blade | 1 |
| 15***30 | Blade & Mounting Group | 1 |
176-7283 Bucket Ar-General Purpose
| 15***48 | Bucket Group-General Purpose | 1 |
| 17***83 | Bucket Ar-General Purpose | 1 |
| 21***10 | Pin As | 2 |
153-7851 Bucket Ar-General Purpose
179-6704 Bucket Ar-General Purpose
| 15***49 | Bucket As-General Purpose | 1 |
| 17***04 | Pin-Support | 2 |
| 17***04 | Bucket Ar-General Purpose | 1 |
190-7390 Bucket Ar-General Purpose
| 15***81 | Tooth Group-Uni | 3 |
| 19***90 | Bucket Ar-General Purpose | 1 |
153-7857 Bucket Ar-General Purpose
| 15***57 | Bucket Ar-General Purpose | 1 |
| 15***81 | Tooth Group-Uni | 4 |
153-7860 Bucket Ar-General Purpose
| 15***60 | Bucket Ar-General Purpose | 1 |
| 15***81 | Tooth Group-Uni | 4 |
153-7854 Bucket Ar-General Purpose
| 15***54 | Bucket Ar-General Purpose | 1 |
| 15***81 | Tooth Group-Uni | 3 |
246-0094 Bucket Ar-Tiltable -Ditch Cleaning
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 24***46 | Pin | 2 |
246-0093 Bucket Ar-Tiltable
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 24***46 | Pin | 2 |
207-8929 Bucket As
| 16***30 | Plate-Identification; (Cat) | 2 |
| 19***02 | Edge | 1 |
| 19***05 | Adapter | 4 |
207-8930 Bucket As
| 16***30 | Plate-Identification; (Cat) | 2 |
| 19***03 | Edge | 1 |
| 19***05 | Adapter | 4 |
207-8926 Bucket As
| 16***30 | Plate-Identification; (Cat) | 2 |
| 19***95 | Edge | 1 |
| 19***05 | Adapter | 3 |
207-8927 Bucket As
| 16***30 | Plate-Identification; (Cat) | 2 |
| 19***96 | Edge | 1 |
| 19***05 | Adapter | 3 |
207-8928 Bucket As
| 16***30 | Plate-Identification; (Cat) | 2 |
| 19***01 | Edge | 1 |
| 19***05 | Adapter | 3 |
153-7865 Bucket As-Ditch Cleaning
| 15***65 | Bucket As-Ditch Cleaning | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
153-7863 Bucket As-Ditch Cleaning
| 15***63 | Bucket As-Ditch Cleaning | 1 |
153-7867 Bucket As-Ditch Cleaning
| 15***67 | Bucket As-Ditch Cleaning | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
247-1209 Bucket As-Ditch Cleaning
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 24***09 | Bucket As-Ditch Cleaning | 1 |
153-7849 Bucket As-General Purpose
| 13***76 | Sidecutter-Lh | 1 |
| 13***77 | Sidecutter-Rh | 1 |
| 15***49 | Bucket As-General Purpose | 1 |
153-7852 Bucket As-General Purpose
| 13***76 | Sidecutter-Lh | 1 |
| 13***77 | Sidecutter-Rh | 1 |
| 15***52 | Bucket As-General Purpose | 1 |
231-8567 Bucket Gp
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 23***67 | Bucket Group | 1 |
207-8922 Bucket Gp
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 19***06 | Tip-Long | 3 |
| 19***07 | Pin-Tip | 3 |
207-8921 Bucket Gp
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 19***06 | Tip-Long | 3 |
| 19***07 | Pin-Tip | 3 |
207-8925 Bucket Gp
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 19***06 | Tip-Long | 4 |
| 19***07 | Pin-Tip | 4 |
207-8924 Bucket Gp
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 19***06 | Tip-Long | 4 |
| 19***07 | Pin-Tip | 4 |
207-8923 Bucket Gp
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 19***06 | Tip-Long | 3 |
| 19***07 | Pin-Tip | 3 |
187-8806 Bucket Gp-Excavation
| 14***93 | Bolt; (M12x1.75x40-mm) | 6 |
| 18***06 | Bucket Group-Excavation | 1 |
| 23***99 | Tooth | 3 |
187-8810 Bucket Gp-Excavation
| 14***93 | Bolt; (M12x1.75x40-mm) | 10 |
| 18***10 | Bucket Group-Excavation | 1 |
| 23***99 | Tooth | 5 |
187-8808 Bucket Gp-Excavation
| 14***93 | Bolt; (M12x1.75x40-mm) | 8 |
| 18***08 | Bucket Group-Excavation | 1 |
| 23***99 | Tooth | 4 |
187-8807 Bucket Gp-Excavation
| 14***93 | Bolt; (M12x1.75x40-mm) | 6 |
| 18***07 | Bucket Group-Excavation | 1 |
| 23***99 | Tooth | 3 |
187-8805 Bucket Gp-Excavation
| 14***93 | Bolt; (M12x1.75x40-mm) | 4 |
| 18***05 | Bucket Group-Excavation | 1 |
| 23***99 | Tooth | 2 |
187-8809 Bucket Gp-Excavation
| 14***93 | Bolt; (M12x1.75x40-mm) | 8 |
| 18***09 | Bucket Group-Excavation | 1 |
| 23***99 | Tooth | 4 |
153-7848 Bucket Gp-General Purpose
| 15***48 | Bucket Group-General Purpose | 1 |
| 15***81 | Tooth Group-Uni | 3 |
172-1157 Coupler Ar-Quick
| 17***57 | Coupler Ar-Quick; -Mechanical | 1 |
| 17***43 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***86 | Plate & Film Group; -Quick Coupler | 1 |
179-9826 Coupler Gp-Quick
| 16***73 | Shim; (0.3-mm Thk) | 4 |
| 16***98 | Lock Group-Pin; -Lh | 1 |
| 16***99 | Lock Group-Pin; -Lh | 1 |
240-4060 Coupler Gp-Quick
| 21***12 | Pin | 2 |
| 24***60 | Coupler Group-Quick | 1 |
| 24***61 | Coupler Group-Quick | 1 |
240-4061 Coupler Gp-Quick
| 09***28 | Fitting-Grease | 1 |
| 09***37 | Pin; (Spring) | 2 |
| 24***61 | Coupler Group-Quick | 1 |
169-5725 Coupler Gp-Quick
| 16***16 | Pin-Support | 2 |
| 16***25 | Coupler Group-Quick | 1 |
| 17***26 | Coupler Group-Quick | 1 |
233-2948 Coupler Gp-Quick
| 17***27 | Shim; (0.5-mm) | 4 |
| 17***28 | Shim; (1-mm Thk) | 4 |
| 21***12 | Pin | 2 |
233-2947 Coupler Gp-Quick
| 16***73 | Shim; (0.3-mm Thk) | 4 |
| 17***98 | Pin As | 1 |
| 20***81 | Lock Group-Pin; -Quick Coupler | 1 |
252-2612 Edge-Cutting -Rh
| 25***12 | Edge-Cutting; -Rh | 1 |
252-2611 Edge-Cutting -Lh
| 25***11 | Edge-Cutting; -Lh | 1 |
219-5492 Kit-Quick Coupler
| 20***81 | Lock Group-Pin; -Quick Coupler | 1 |
| 21***92 | Kit-Quick Coupler | 1 |
169-1399 Lock Gp-Pin -Lh
| 09***81 | Pin-Spring | 1 |
| 15***34 | Pin | 1 |
| 15***95 | Knob | 1 |
206-9481 Lock Gp-Pin -Quick Coupler
| 09***81 | Pin-Spring | 1 |
| 20***90 | Pin, . Cap | 1 |
| 20***79 | Carrier As | 1 |
169-1398 Lock Gp-Pin -Lh
| 09***81 | Pin-Spring | 1 |
| 15***34 | Pin | 1 |
| 15***95 | Knob | 1 |
172-8743 Lock Gp-Quick Coupler -Mechanical
| 17***43 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***23 | Wedge | 1 |
| 17***24 | Spindle | 1 |
154-2683 Mounting Gp-Bucket
| 15***83 | Mounting Group-Bucket | 1 |
| 16***20 | Pin | 2 |
| 23***44 | Pin As | 2 |
233-2885 Tooth Gp
| 14***93 | Bolt; (M12x1.75x40-mm) | 2 |
| 23***99 | Tooth | 1 |
| 23***85 | Tooth Group | 1 |
153-7881 Tooth Gp-Uni
| 13***90 | Tooth-Uni | 1 |
| 15***81 | Tooth Group-Uni | 1 |
| 15***39 | Screw-Flat Head; (M16x2x60-mm) | 2 |
3013 serial number reference
The engine data plate sits on the left side of the block near the injection pump and rocker/valve cover; if the plate is missing, the serial is often stamped directly into the block. Read the first three characters as the prefix (identifies the engine family/build block) and the following five digits as the sequential unit number.
| Prefix | Identifies | Notes |
|---|---|---|
| 313 | 3013C industrial engine | Serial prefix for the 3013C industrial engine: naturally aspirated 3-cylinder, 1.496 L (1.5L) displacement, 84 mm bore x 90 mm stroke (3.3 in x 3.5 in). Fitted to Cat mini hydraulic excavators 302.5 (1999-2005) and 303.5 (2000-2002), plus small skid steers, generator sets and other compact equipment. Shares core design with the Perkins 403C-15/403D-15 and Shibaura N843 - overhaul kits list all three as interchangeable, pointing to a common engine architecture across those brands. Production generally spans the late 1990s through the mid-2000s. |
| G3P | 3013C industrial engine | Later or parallel serial prefix block for the 3013C, same naturally aspirated 1.496 L 3-cylinder configuration as the 313 prefix. Treat as a separate production block, plant, or region lot rather than a different engine spec - confirm exact build era and machine fitment with your dealer. |
| 4XD | 3013 industrial engine (non-C) | Serial prefix for the base 3013 industrial engine (without the C suffix), same 1.496 L 3-cylinder family, in production from 1999. Cat's own model-prefix listings keep this as a distinct block from the 3013C's 313/G3P prefixes. Exact configuration differences from the 3013C are not documented in available references - confirm with your dealer. |
Frequently asked questions
What engine does the Caterpillar 3013 use?
The 3013 is Caterpillar's own naturally aspirated, 3-cylinder, 1.5L (1496 cc) mechanically-injected diesel, built on the Perkins 403C-15/403D-15 architecture and sold under Cat's C1.5 industrial engine family. It has no ECM and no true electronic fault codes.
What is the operating weight of the Caterpillar 3013?
The 3013 is a power unit, not a stand-alone machine, so it carries no operating weight of its own. Dry engine weight is about 149 kg for the naturally aspirated 3013; the turbocharged 3013C variant runs about 156.5 kg dry. Installed weight depends on the host machine it powers.
What replaced the Caterpillar 3013?
No formal successor model is documented. The turbocharged 3013C is the direct evolution within Cat's C1.5 family, delivering higher output without moving up to the larger 4-cylinder 3024/3024C displacement. Both remain part of Cat's small industrial engine lineup alongside the C1.1 (3011C).
What 3013 owners discuss
The machine cranks fine but the 3013 won't start - what do owners check first?
Community consensus is to chase fuel before electrics. Loosen the fuel line at the inlet on the back of the injection pump and crank the engine - no fuel squirting out means a supply-side problem (tank, lift pump, filter, or a cracked line pulling air ahead of the pump). If fuel is present at the pump, loosen the injector lines next; if nothing shows up there even though fuel is clearly entering the pump, the fault is usually inside the pump itself - a stuck fuel control rack or a broken return/start spring after the machine has sat unused. Pulling the pump on this engine is a fairly small job: a few fasteners retain the housing, and a small R-clip secures the external rack linkage that has to come off before the pump slides free. Perished or cracked fuel lines drawing in air after long storage come up repeatedly as the sneaky root cause behind a no-fuel-at-the-pump no-start.
Are there known wear points on the injection pump or injectors owners keep an eye on?
Yes. A specific leak point reported by owners of 3013-powered machines is fuel weeping across the top of the injection pump, at the plate where the outgoing injector lines gather - often just a light seep while running, but it pools more obviously when the primer bulb is worked with the engine off. Old injectors leaking at the injector body are a separate, unrelated wear item on the same engine. Neither is an emergency by itself, but a chronic seep at either spot is treated as a due top-end fuel system service rather than something to keep topping off and ignoring.
Does the 3013 have any cold-starting quirks compared to a common-rail engine?
Cat's 3013 designation covers both the earlier Perkins-based 403C-15 and the later 403D-15 unit; both are indirect-injection engines using a cassette-style mechanical pump and glow plugs for cold starting, and parts and fixes largely cross over between the two. Community advice is to run the glow plugs their full cycle before cranking - roughly 10 seconds above about 10°C (50°F), longer in cold weather - rather than bumping the key early. On higher-hour engines, worn glow plugs and corroded or loose wiring contacts (including weak amp draw) are called out as common causes of starting getting progressively harder, right alongside the usual suspects of fouled injectors, low compression, and old fuel.
Why do 3013-powered mini excavators run hot, and is it the engine's fault?
On the mini excavators this engine powers, the radiator and hydraulic oil cooler sit stacked face-to-face in a tight engine bay, and owners report debris packing into the gap between the two cores where it can't be seen from outside. That trapped debris is one of the most common causes of a 3013-powered machine running hot, and the standard fix is cleaning both sides of the stack with compressed air or a hose rather than just glancing at the front core. If overheating persists after a thorough cleaning, owners point next to a worn thermostat or water pump rather than the engine's basic cooling design.
What electrical or sensor issues come up most with this engine?
The fuel shutoff solenoid is the only electrical connection on the injection pump - it has to stay energized to hold the fuel passage open, so losing power to it kills the engine instantly, and owners use that behavior as a quick check that the shutdown circuit is working. A separate quirk owners flag: the fuel return fitting on top of the pump also acts as a check valve, and if it clogs the engine will start and run briefly before losing power and stalling, which can look like a solenoid or sensor fault but isn't. Because a solenoid that won't reliably de-energize affects whether the engine can be shut down on demand, have your dealer verify shutoff solenoid wiring and function rather than relying on fuel starvation alone to stop the engine.
The engine surges or stalls under hydraulic load - is that the 3013 or the machine?
Owners of 303.5-class excavators built around this engine report rpm surging and stalling specifically during hydraulic operations under load, and community troubleshooting points at the fuel side before the engine internals: a clogged fuel filter or air being drawn into the suction side of the fuel system are the first things checked, followed by bleeding the lines and blowing air through the suction line from the tank to clear restrictions. If surging continues after fresh filters and a clean fuel system, owners then look at the hydraulic pump itself, since a worn or internally leaking hydraulic pump can load the engine unevenly and produce the same kind of rpm sag.
What should I check when buying a used machine with a 3013 engine in it?
Run it to full operating temperature and watch exhaust color and idle steadiness - blue smoke points to ring or valve wear, white points to a fuel or coolant issue. Check the breather for excess blow-by, and inspect the two known seep points on this engine: the top of the injection pump where the injector lines gather, and the injector bodies themselves. Cycle the key to confirm the glow plugs and fuel shutoff solenoid both function cleanly, since both are established wear items on high-hour units. Treat the hour meter as one data point rather than gospel and weigh it against overall condition and maintenance history. Because a compression or injection-pump problem on this engine is cheaper to walk away from than to rebuild, have your dealer verify a compression or leak-down test before committing to any machine with a history of hard starting or smoke.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Serial-range & configuration variants
This page covers the Caterpillar 3013. Related factory variants of the same model family:
3013
Need a specific 3013 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.