Caterpillar 2PC4000
Specifications
Post a parts request and compare supplier quotes.
The Caterpillar 2PC4000 is a pneumatic tire lift truck documented in MCFA brochure CECV0019-01 (09/10). Its exact model column lists 4,000 lb rated capacity at a 24-inch load center and 131 in maximum fork height with the standard two-stage mast.
The brochure lists the K21 engine and gasoline/LP gas fuel, with 53 hp SAE gross continuous output and 11.0 mph loaded travel speed. The same column lists 92 in length to fork face, 83 in overhead-guard height, and a minimum outside turning radius of 79.5 in. These are the brochure's standard-configuration figures.
Caterpillar 2PC4000 specifications
Performance
| Rated load capacity at 24-inch load center (2010 MCFA brochure) | 4,000 lb |
| Loaded travel speed (2010 MCFA brochure) | 11.0 mph |
Dimensions
| Maximum fork height, standard two-stage mast (2010 MCFA brochure) | 131 in |
| Length to fork face (2010 MCFA brochure) | 92 in |
| Height to top of overhead guard (2010 MCFA brochure) | 83 in |
| Minimum outside turning radius (2010 MCFA brochure) | 79.5 in |
Engine
| SAE gross continuous output (2010 MCFA brochure) | 53 hp |
| Engine model (2010 MCFA brochure) | K21 |
| Fuel type (2010 MCFA brochure) | Gasoline / LP gas |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
Need a specific 2PC4000 part?
Search for part references or post a request for supplier quotes in Heavy Parts AI.
Post a parts request and compare supplier quotes.