Caterpillarskid steer loadercompact track loader
Caterpillar 299C
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 299C is a rubber-tracked compact track loader (CTL), the largest of Cat's C-Series high-drive CTL family alongside the 279C and 289C. Built roughly 2009 to 2015, it runs a Cat C3.4 DIT four-cylinder turbocharged, air-to-air aftercooled diesel rated near 67 kW (90 hp) net — the same block used in the 279C/289C but tuned higher than their 61 kW (82 hp) rating. Operating weight lands around 4,867 kg (10,730 lb), with rated operating capacity near 1,882 kg (4,150 lb); exact figures shift with bucket, counterweight, and track width. Cat offered it with a vertical-lift loader arm for reach at full height, a two-speed hydrostatic drive, standard or high-flow XPS hydraulics for attachment work, and a choice of open ROPS canopy or enclosed cab with heat or heat-and-air-conditioning. It sits in the same C-series generation as the 279C and 289C, and was replaced directly by the C3.8-powered 299D, then the 299D2 and 299D3.
The 299C ran its whole production life on the same C3.4 DIT engine and elevated (high) drive undercarriage without an interim update — unlike the 279C and 289C, which each got a Tier 4 Interim "C2" revision before their own D-series changeover. The bigger break for the 299 line came directly with the D-series: the 299D and 299D2 moved to the larger C3.8 engine with electronic controls and, on later Tier 4 Final builds, particulate aftertreatment, adding power along with emissions-system complexity. That makes the 299C the last of the mechanically simpler, DPF-free 299-family engines, a real draw for buyers who want to avoid aftertreatment maintenance. Its steel-embedded track, planetary final drives, and wet-disc brakes are shared wear items across the whole 279C/289C/299C family, so undercarriage and drive-line parts move steadily through the resale and rebuild channel even though Cat has since moved the current lineup on to D3 and XE-generation machines.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 299C specifications
Engine
| Engine model | Cat C3.4 DIT, 4-cylinder, turbocharged, liquid-cooled diesel |
| Gross power | 70 kW (94 hp) @ 2,500 rpm |
| Net power | 67 kW (90 hp) @ 2,500 rpm |
| Displacement | 3.3 L (201 cu in) |
| Bore x stroke | 94.0 x 120.0 mm (3.70 x 4.72 in) |
| Compression ratio | 17:1 |
Weights
| Operating weight | 4,865 kg (10,730 lb) |
| Ground pressure | 0.29 bar (4.3 psi) |
Dimensions
| Length without bucket | 3,100 mm (122.1 in) |
| Length with bucket on ground | 3,820 mm (150.4 in) |
| Width over tracks | 1,980 mm (78 in) |
| Height to top of cab | 2,115-2,120 mm (83.3-83.4 in) |
| Height, boom fully raised | 4,120 mm (162.3 in) |
| Ground clearance | 230 mm (9.1 in) |
| Track length on ground (ground contact length) | 1.77 m (5.8 ft) |
| Turning radius | 2,315 mm (91.1 in) |
Performance
| Travel speed, low range | 8.1 km/h (5.0 mph) |
| Travel speed, high range | 13.6 km/h (8.5 mph) |
| Lift height to hinge pin | 3,210 mm (126.3 in) |
| Bucket breakout force | 3,315 kg (7,308-7,310 lb) |
| Tipping load | 3,780 kg (8,338-8,340 lb) |
| Rated operating capacity, 50% of tipping load | 1,882 kg (4,150 lb) |
| Rated operating capacity, 35% of tipping load | 1,318 kg (2,905 lb) |
| General-purpose bucket capacity | 0.46 m3 (0.6 yd3) |
Service capacities (summary)
| Fuel tank | 98 L (25.8-26 gal) |
| Hydraulic system | 57 L (15 gal) |
| Engine oil | 10 L (2.6 gal) |
| Cooling system | 14 L (3.7 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
299C fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) - Cat C3.4 DIT turbocharged diesel | 10.0 L (2.6 US gal) | Cat DEO-ULS diesel engine oil, API CE/CF-4/CG-4. SAE 15W-40 for warmer ambient ranges; SAE 10W-30 multigrade where cold-start temperatures run down toward -18°C (0°F). |
| Cooling system | 14.0 L (3.7 US gal) | Cat ELC (Extended Life Coolant/Antifreeze), premixed formula. Protects to roughly -37°C (-35°F); do not substitute conventional green coolant without a full system flush. |
| Fuel tank | 98.0 L (25.8-26 US gal) | Ultra-low-sulfur No. 2-D diesel fuel; use a winterized blend or fuel conditioner in cold climates to prevent gelling. |
| Hydraulic system, total (tank + lines + cylinders) | 57.0 L (15 US gal) | Cat TDTO (Transmission/Drive Train Oil), multigrade TDTO-TMS preferred across seasonal ranges; Cat HYDO Advanced (SAE 10W or SAE 30 single-grade) is an accepted alternate. Hydrostatic drive shares this circuit, so fluid choice also governs drive performance in cold starts. |
| Hydraulic tank (refill only) | 39-42 L (10.3-11 US gal) - varies by source/configuration | Same fluid as hydraulic system: Cat TDTO or Cat HYDO Advanced, matched to ambient temperature grade. |
| Final drive, each side (two final drives, one per track) | 1.0 L (1.1 US qt) each | SAE 80W-90 or 85W-140 gear oil, API GL-5. Do not overfill; excess pressure can push oil past the drive seals. |
| Grease (chassis, pins, bushings, undercarriage points) | Spec only, no fill volume given | Cat Advanced 3Moly Grease (lithium-complex, 3% molybdenum disulfide) for general chassis and pin service, effective roughly -20°C to 40°C (-4°F to 104°F). Cat Extreme Application Grease is the step-up choice for higher load, higher heat, or heavy-moisture conditions. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 299C maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 6,000 h |
|
Servicing the 299C beyond the schedule
Predictive Maintenance & Fluid Analysis
Run S·O·S oil sampling on the C3.4 DIT engine, planetary final drives, and hydraulic tank at every scheduled change — the mechanical, non-DPF engine gives clean baselines, so metal trending shows up fast. Watch hydraulic filter and breather condition closely on machines running the high-flow XPS pump; the extra flow works the return filter harder. Check final-drive oil for water intrusion after wet-site work, a common 299C failure path. Log coolant condition every interval — a cracked aftercooler boot or restricted radiator core shows up first as an overheat, not a fault code.
Corrective & Common Repairs
Track de-beading and mistracking are the most common field calls on the 299C's steel-embedded rubber track — check tension and roller-frame alignment before blaming the track itself. Wet multi-disc brake drag or a machine that creeps on slopes usually traces to hydrostatic charge pressure or the brake-release circuit, not the final drive. Cab HVAC complaints — no heat, weak A/C — are common on high-hour enclosed-cab machines and usually trace to the heater core, blend door, or compressor clutch, not engine cooling.
Overhaul & Rebuild Points
At major rebuild, focus on the planetary final drive housings and travel motors — they carry the 299C's full drawbar load through its elevated high-drive sprockets and wear fastest in aggressive grading or land-clearing work. Track rollers and idlers with metal-face seals should be assessed as a set; uneven wear signals a roller-frame or tension problem, not just tired components. Check the turbocharger and aftercooler piping for boost leaks before condemning injectors on a power-loss complaint — the C3.4 DIT has no electronic diagnostics to flag it directly.
Seasonal & Environment Servicing
Before cold weather, switch to season-grade engine oil and confirm coolant freeze protection — the C3.4 DIT has no factory block heater on most configurations, so cold starts stress the starter and glow-plug circuit. Clear packed mud, snow, and ice from the undercarriage after every wet-season shift; frozen-in tracks and rollers are a common cause of drive-line strain on this platform. In hot, dusty land-clearing use, shorten air filter and radiator-fin cleaning well below the standard 250/1000-hour marks to protect the turbo and aftercooler.
299C common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 110-6326 | Filter Element As-Air | Air intake service | Check fitment → |
| 110-6331 | Filter Element As-Air | Air intake service | Check fitment → |
| 265-6618 | Filter Element-Cab Air | Air intake service | Check fitment → |
| 265-6619 | Filter Element-Cab Air | Air intake service | Check fitment → |
| 1G-8878 | Filter As-Oil | Hydraulic service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
299C fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 2686-8 | Left-hand drive motor speed sensor, secondary element - abnormal signal frequency, pulse width, or period | Chafed or broken sensor harness wiring, a corroded connector, or a failing LH speed sensor element | Trace the LH drive-motor sensor harness for rub-through near moving track/frame components, inspect the connector for corrosion, and test sensor output before replacing the sensor pack |
| 2687-8 | Right-hand drive motor speed sensor, primary element - abnormal signal frequency, pulse width, or period | Chafed or broken harness wiring, a loose or corroded connector, or a failed RH speed sensor element | Inspect and test the RH sensor harness and connector, reroute and clamp wiring away from abrasion points, confirm signal with the diagnostic tool before condemning the sensor |
| 2688-8 | Right-hand drive motor speed sensor, secondary element - abnormal signal frequency, pulse width, or period | Same RH sensor-pack harness fault pattern as 2687; wiring abrasion or connector corrosion is the most common cause | Check the RH sensor harness end to end for abrasion and corrosion, secure it clear of moving parts, replace the sensor pack only after wiring tests good |
| 2685-8 | Left-hand drive motor speed sensor, primary element - abnormal signal frequency, pulse width, or period | Same LH sensor-pack wiring fault pattern seen on the paired 2686 code | Check LH sensor harness and connector, verify signal with the diagnostic tool, replace the sensor pack only after wiring is confirmed good |
| 100-3 / 100-4 | Engine oil pressure sensor circuit reading voltage above normal (100-3) or below normal (100-4) | Open or shorted sensor circuit, a corroded connector, or a failed oil pressure sensor - not necessarily a true low oil pressure condition | Confirm actual oil pressure with a mechanical gauge before condemning the sensor, then inspect sensor wiring and the connector for damage or corrosion |
| 110-3 / 110-4 | Engine coolant temperature sensor circuit voltage above or below normal | Faulty sensor, damaged wiring, or a poor connector ground affecting the coolant temperature signal | Check coolant level and the sensor wiring/connector first, verify sensor resistance against spec, replace the sensor only if the circuit tests good but the reading stays implausible |
| 168-2 | Electrical system (battery) voltage reading erratic, intermittent, or incorrect | Loose or corroded battery terminals, a weak battery, or a charging-system fault feeding the machine ECM | Load-test the battery, clean and tighten terminals, and check alternator/charging output before replacing any control module |
| 190-8 | Engine speed sensor - abnormal signal frequency, pulse width, or period | Damaged sensor wiring, an incorrect sensor air gap, or a failing engine speed/timing sensor | Inspect sensor mounting and air gap, check the harness for chafing near the flywheel housing, test sensor output before replacement |
| 1961-3 / 1961-4 | Hydraulic oil temperature sensor circuit voltage above or below normal | Sensor or connector fault at the hydraulic manifold - usually corrosion or a chafed wire rather than true overheating | Check actual hydraulic oil temperature against the gauge, inspect the sensor connector for corrosion, test sensor resistance before replacing it |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
299C attachments & work tools
Buckets
General-purpose, multi-purpose (4-in-1), light-material, and industrial/grapple buckets are sized to the 299C's roughly 1980 mm (78 in) frame width. General-purpose bucket capacity for this frame class runs about 0.46-0.6 m3 (0.6-0.8 cu yd) depending on bucket style; treat exact capacity as varies by configuration.
Pallet forks / material handling
Heavy-duty fork carriage with tines adjustable in width for palletized loads, bagged material, and nursery/landscape handling. Mounts to the same quick-coupler plate as buckets and other work tools.
Grapples
Root grapples and grapple buckets are offered for this loader class for debris handling, brush clearing, and material sorting. Common pairing on rubber-tracked CTLs used for land-clearing and site cleanup work.
Augers
Auger drive units with interchangeable bits are available for post-hole digging and similar drilling tasks. Auger drives run off the machine's auxiliary hydraulic circuit.
Brooms
Hydraulic brooms for this size class come in pickup (collects into an integrated hopper), utility (sweeps loose debris forward/reverse), and angle (windrows debris to the side) configurations. All run on standard auxiliary hydraulic flow.
Blades and snow tools
Snow blades and snow blowers are available sized to the machine's operating width for snow and ice removal. Snow blowers require meaningfully higher auxiliary hydraulic torque than buckets or light tools.
Cold planers
Compact-format cold planers are offered for this loader class for small asphalt/concrete grade-restoration jobs, with drum widths from roughly 350 mm up to 1200 mm (14 in to 47 in) across the compact-equipment planer lineup. Heavier-duty planing benefits from the high-flow hydraulic option rather than standard flow.
Forestry mulching heads
Mulcher/masticator heads pair with this machine when equipped with the optional High Flow XPS hydraulic system: about 125 lpm (33 gpm) and up to 280 bar (4061 psi), versus 84 lpm (22 gpm) at 230 bar (3335 psi) on standard-flow machines. Used for vegetation management and land-clearing work; mulching-capable configurations were factory-optional on this generation rather than a dedicated purpose-built trim.
Quick coupler / mounting system
Standard tool changes use a manual, two-lever quick-coupler plate common across the Cat skid-steer and compact-track-loader line of this era. An optional hydraulic quick coupler lets the operator engage/disengage work tools from the cab without leaving the seat.
Factory configuration options
Documented factory options for this model include a counterweight, rotating beacon, engine block heater, cold-weather hydraulic oil, and the High Flow XPS hydraulic upgrade. Heavier forestry-style cab and coupler-area guarding for brush/mulching duty is generally an aftermarket add-on on this C-series generation; a more integrated factory land-management guarding package became standard on later D-series versions of this model line.
All 299C assemblies by section
Every catalogued assembly group for the Caterpillar 299C. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
258-2548 Aftercooler & Mounting Gp -With Fan
| 11***63 | Clip-Spring | 2 |
| 13***40 | Locknut; (M8x1.25-Thd) | 2 |
| 14***32 | Pin As | 1 |
258-3320 Air Cleaner Gp
| 11***26 | Filter Element As-Air; (Primary) | 1 |
| 11***31 | Filter Element As-Air; (Secondary) | 1 |
| 11***17 | Valve-Dust; (Air Cleaner) | 1 |
280-8294 Air Cleaner Gp
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 2 |
| 13***43 | Clamp-Hose | 1 |
| 25***11 | Plate | 1 |
258-3453 Air Cleaner Gp
| 15***98 | Band-Mounting | 1 |
| 23***25 | Indicator | 1 |
| 25***20 | Air Cleaner Group | 1 |
280-8393 Guard Gp-Debris -Turbocharger, Exhaust Manifold
| 28***55 | Guard As-Exhaust; (Turbocharger) | 1 |
| 28***91 | Flange, Guard-Exhaust; (Manifold) | 1 |
| 28***93 | Guard Group-Debris; -Turbocharger, Exhaust Manifold | 1 |
272-3062 Kit-Debris Guard -Turbocharger, Exhaust Manifold
| 27***52 | Guard-Exhaust; (Manifold) | 1 |
| 27***62 | Kit-Debris Guard; -Turbocharger, Exhaust Manifold | 1 |
| 28***55 | Guard As-Exhaust; (Turbocharger) | 1 |
315-7769 Lines Gp-Air
| 09***00 | Washer; (1.5mm Thk) | 2 |
| 25***12 | Clip | 1 |
| 31***01 | Screw | 2 |
316-0471 Lines Gp-Air
| 19***22 | Bolt As; (M8x1.25x22-mm) | 4 |
| 27***82 | Clip | 2 |
| 31***40 | Elbow | 1 |
258-3444 Lines Gp-Air
| 25***43 | Hose As-Air | 1 |
| 25***44 | Lines Group-Air | 1 |
| 5P***68 | Clamp-Hose; (Us Sourced) | 1 |
258-3263 Lines Gp-Air
| 10***51 | Hose | 1 |
| 21***12 | Clamp | 3 |
| 21***66 | Hose | 1 |
287-5323 Manifold Gp-Exhaust
| 19***60 | Nut; (M8x1.25-Thd) | 8 |
| 23***60 | Bolt | 8 |
| 23***24 | Gasket-Manifold | 1 |
335-5750 Manifold Gp-Inlet
| 09***49 | Bolt; (M8x1.25x40-mm) | 11 |
| 23***05 | Manifold-Inlet | 1 |
| 23***06 | Gasket; (Inlet Manifold) | 1 |
287-4832 Manifold Gp-Inlet
| 09***49 | Bolt; (M8x1.25x40-mm) | 12 |
| 23***05 | Manifold-Inlet | 1 |
| 23***06 | Gasket; (Inlet Manifold) | 1 |
258-2462 Muffler & Mounting Gp
| 19***76 | Washer-Hard; (8.8x20x8-mm Thk) | 3 |
| 23***21 | Nut; (M10x1.25-Thd) | 1 |
| 25***19 | Muffler As | 1 |
280-8347 Muffler & Mounting Gp
| 19***76 | Washer-Hard; (8.8x20x8-mm Thk) | 3 |
| 23***21 | Nut; (M10x1.25-Thd) | 1 |
| 27***50 | Muffler As | 1 |
316-0472 Turbocharger Gp
| 09***00 | Washer; (1.5mm Thk) | 3 |
| 19***06 | Gasket | 4 |
| 23***18 | Gasket | 1 |
Basic Engine
323-2009 Accessory Gp-Engine
| 32***09 | Accessory Group-Engine | 1 |
| 34***61 | Kit-Gasket | 1 |
292-4041 Bearing Gp-Main
| 10***88 | Plate-Thrust; (Standard) | 3 |
| 10***89 | Plate-Thrust; (0.15-mm Os) | 0 |
| 10***90 | Plate-Thrust; (0.35-mm Os) | 0 |
316-0447 Camshaft Gp
| 09***28 | Key | 1 |
| 10***72 | Tappet | 8 |
| 10***73 | Rod-Push | 8 |
287-4033 Connecting Rod Gp
| 10***80 | Rod As-Connecting | 4 |
| 12***55 | Bolt-Connecting Rod | 2 |
| 12***56 | Nut | 2 |
315-7762 Cover Gp-Valve Mechanism
| 09***49 | Bolt; (M8x1.25x40-mm) | 5 |
| 23***83 | Gasket; (Valve Cover) | 1 |
| 31***98 | Cap-Oil Filler; (Engine) | 1 |
314-9860 Crankshaft Gp
| 08***13 | Pin | 2 |
| 09***28 | Key | 2 |
| 13***96 | Nut | 1 |
330-7633 Cylinder Block Gp
| 09***41 | Cap | 10 |
| 09***20 | Pin | 2 |
| 10***76 | Bolt-Bearing Cap | 10 |
315-7760 Cylinder Head Gp
| 10***46 | Bolt-Cylinder Head | 17 |
| 29***45 | Gasket-Head | 1 |
| 31***60 | Cylinder Head Group | 1 |
258-2452 Drain Gp-Engine Oil
| 11***70 | Cap | 1 |
| 1P***78 | Clamp; (Hose) | 1 |
| 21***19 | Adapter | 1 |
314-9861 Flywheel Gp
| 03***39 | Gear-Starter; (112-Teeth) | 1 |
| 22***93 | Bolt; (M12x1.25x30-mm) | 6 |
| 23***91 | Flywheel As | 1 |
315-7766 Gear Gp-Front
| 11***27 | Gear; (46-Teeth) | 1 |
| 11***29 | Gear; (23-Teeth) | 1 |
| 11***85 | Gear-Pump; (Oil, 31-Teeth) | 1 |
258-2469 Guard Gp-Belt
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 4 |
| 13***22 | Bolt-Locking; (M8x1.25x16-mm) | 2 |
| 25***43 | Guard-Belt | 1 |
315-7764 Housing Gp-Flywheel
| 10***80 | Gasket-Rear | 1 |
| 11***15 | Seal As-Oil | 1 |
| 14***17 | Bolt; (M10x1.25x25-mm) | 10 |
315-8336 Housing Gp-Front
| 09***00 | Washer; (1.5mm Thk) | 2 |
| 09***29 | Seal-O-Ring (Id=139.5mm); (Id=139.50mm) | 1 |
| 19***12 | Bolt; (M6x1x18-mm) | 4 |
315-7761 Lifting Gp-Engine
| 23***66 | Eye | 1 |
| 23***68 | Gasket; (Rear Head) | 1 |
| 31***04 | Cover | 1 |
258-2447 Mounting Gp-Engine
| 11***90 | Mount As | 2 |
| 12***80 | Locknut; (M12x1.75-Thd) | 1 |
| 14***88 | Mount-Engine | 2 |
335-5772 Pan Gp-Oil
| 09***82 | Gasket, Oil Drain | 1 |
| 13***32 | Plug; (Drain, Engine Oil) | 1 |
| 16***01 | Sealant-Silicone | 1 |
316-0469 Pan Gp-Oil
| 09***82 | Gasket, Oil Drain | 1 |
| 13***32 | Plug; (Drain, Engine Oil) | 1 |
| 16***01 | Sealant-Silicone | 1 |
316-0470 Piston Gp
| 23***15 | Pin-Piston | 4 |
| 25***38 | Ring-Snap | 8 |
| 31***62 | Ring-Piston; (Standard) | 4 |
287-2983 Plug Gp-Engine
| 19***11 | Plug | 1 |
| 28***83 | Plug Group-Engine; -Cylinder Block, Rh | 1 |
287-2922 Plug Gp-Engine
| 28***22 | Plug Group-Engine; -Cylinder Block, Lh | 1 |
| 5I***05 | Plug | 6 |
301-3396 Pulley Gp-Crankshaft
| 30***96 | Pulley Group-Crankshaft | 1 |
| 30***97 | Pulley-Crankshaft; (2-Groove) | 1 |
287-6114 Pulley Gp-Water Pump
| 23***07 | Pulley | 1 |
| 28***14 | Pulley Group-Water Pump | 1 |
| 8T***42 | Bolt; (M8x1.25x14-mm) | 4 |
287-6138 V-Belt Gp
| 28***38 | V-Belt Group; -Water Pump | 1 |
| 35***69 | V-Belt; (Water Pump) | 1 |
235-5880 Valve Mechanism Gp
| 09***05 | Cap | 1 |
| 19***24 | Ring-Snap | 2 |
| 22***45 | Rocker As | 8 |
Cooling System
314-9900 Cooler Gp-Engine Oil
| 09***13 | Seal-O-Ring | 4 |
| 09***21 | Plug | 2 |
| 23***98 | Stud | 1 |
292-4040 Drain Gp-Coolant
| 23***78 | Valve As-Drain | 1 |
| 29***40 | Drain Group-Coolant | 1 |
315-8355 Housing & Regulator Gp
| 09***75 | Bolt; (25-mm Long) | 2 |
| 23***09 | Washer-Special | 1 |
| 23***31 | Cover | 1 |
258-3553 Lines Gp-Water
| 16***15 | Cap-Vented; (Coolant Recovery Tank) | 1 |
| 1P***78 | Clamp; (Hose) | 2 |
| 22***78 | Clamp-Tbolt; (M5x0.8) | 4 |
258-3542 Mounting Gp-Rad & Oil Cooler
| 14***32 | Pin As | 1 |
| 17***55 | Pin | 2 |
| 20***76 | Stud-Ball | 4 |
335-9117 Pump Gp-Water
| 10***47 | Cover-Pump | 1 |
| 19***60 | Plug | 1 |
| 33***17 | Pump Group-Water | 1 |
287-6056 Pump Gp-Water
| 28***66 | Bolt; (M8x1.25x65-mm) | 1 |
| 28***56 | Pump Group-Water | 1 |
| 33***17 | Pump Group-Water | 1 |
258-3459 Radiator & Hyd Oil Cooler Gp
| 03***65 | Cap As-Radiator; (Sea Water Heat Exchanger) | 1 |
| 06***80 | Fitting | 1 |
| 12***52 | Spacer; (10.5x20x28-mm Thk) | 1 |
Electrical And Starting System
315-8353 Alternator Gp-Charging
| 03***05 | Terminal-Cable; (00-Ga, 5/16-In Screw) | 1 |
| 11***16 | Block | 1 |
| 1P***10 | Tape (Order By The Meter) (Use As | 0 |
105-2814 Alternator Gp-Charging
| 10***14 | Alternator Group-Charging | 2 |
| 23***62 | Plate | 1 |
| 23***73 | Bolt; (M10x1.5x90-mm) | 1 |
258-4121 Battery & Wiring Gp
| 25***21 | Battery & Wiring Group | 1 |
| 31***72 | Module Group-Interface; (Key) | 1 |
| 6V***15 | Screw-Pan Head; (4-20x0.25-In) | 1 |
310-5289 Control Gp-Machine
| 11***71 | Puller-Minifuse | 1 |
| 25***27 | Screw-Truss Head; (No 12x17.46-mm) | 2 |
| 25***37 | Film-Fuse Panel | 1 |
258-4144 Cover Gp-Fuse Panel
| 10***59 | Glow Plug | 4 |
| 25***90 | Plate-Connection | 1 |
| 25***44 | Cover Group-Fuse Panel | 1 |
258-4103 Electronics Gp-Machine
| 22***41 | Element As-Jacket Water Heater; (120-Volt, 530-Watt) | 1 |
| 22***42 | Heater Group-Jacket Water | 1 |
| 23***03 | Gasket | 1 |
347-4186 Electronics Gp-Monitor -Monitor
| 13***17 | Cap As-Dust | 1 |
| 21***12 | Cord As | 1 |
| 22***35 | Element As-Jacket Water Heater; (240-Volt, 530-Watt) | 1 |
347-4187 Electronics Gp-Monitor
| 15***28 | Spacer; (7x16x20-mm Thk) | 4 |
| 25***27 | Screw-Truss Head; (No 12x17.46-mm) | 9 |
| 25***48 | Plate As | 1 |
235-5904 Glow Plug Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***17 | Tape; (5.5m) | 0 |
218-0942 Heater Gp-Jacket Water
| 15***71 | Kit-Connecting Plug; (4-Pin) | 0 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 2 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
218-0943 Heater Gp-Jacket Water
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***39 | Relay As | 3 |
258-4145 Kit-Control Mounting -Product Link
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 20***14 | Lens As; (Floodlight) | 1 |
| 23***30 | Body As; (Floodlight) | 1 |
258-4185 Kit-Security
| 10***53 | Case, Spacer; (Spherical) | 1 |
| 10***54 | Spacer; (Spherical) | 1 |
| 10***55 | Washer; (Spherical) | 1 |
328-2366 Kit-Wiring Harness -Accugrade
| 10***53 | Case, Spacer; (Spherical) | 1 |
| 10***54 | Spacer; (Spherical) | 1 |
| 10***55 | Washer; (Spherical) | 1 |
258-4127 Kit-Work Tool Wiring
| 25***27 | Kit-Work Tool Wiring | 1 |
| 9R***42 | Plug As | 1 |
| 9R***58 | Cord As | 1 |
234-4328 Lamp Gp-Flood
| 23***28 | Lamp Group-Flood; -Front, Rear, Wide Range | 1 |
| 27***00 | Lens; (Amber)(Warning Beacon) | 1 |
| 9R***42 | Plug As | 1 |
195-0190 Lamp Gp-Head & Signal -Lh
| 08***48 | Lamp; (12-Volt, 5-Watt) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
195-0189 Lamp Gp-Head & Signal -Rh
| 19***89 | Lamp Group-Head & Signal; -Rh-High, Low Beam | 1 |
| 23***28 | Lamp Group-Flood; -Front, Rear, Wide Range | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
309-1325 Lamp Gp-Warning Beacon -Amber
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 16***95 | Lens | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
128-6985 Lamp Gp-Warning Beacon -Amber, Magnetic Mount, Rotating
| 08***48 | Lamp; (12-Volt, 5-Watt) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
258-4164 Lighting Gp-Flood -Work Lights, Front
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 25***64 | Lighting Group-Flood; -Work Lights, Front | 1 |
333-4957 Lighting Gp-Roading -Rear
| 1H***44 | Lockwasher (Bracket To Cab) | 2 |
| 26***80 | Fuse; (20-Ampere)(Main) | 1 |
| 26***01 | Fuse; (60-Ampere)(Power, 1) | 1 |
258-4130 Lighting Gp-Roading -Head, Signal, Stop, Tail
| 24***97 | Cable-Coiled; (Sensor) | 1 |
| 25***29 | Receiver Group-Laser; (Lr410) | 1 |
| 25***29 | Case-Carrying | 1 |
258-4169 Lighting Gp-Stop & Tail
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 3 |
| 25***69 | Lighting Group-Stop & Tail | 1 |
258-4184 Lighting Gp-Warning Beacon -Amber, Magnetic Mount, Rotating
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 17***49 | Strap; (Marker) | 1 |
| 25***84 | Lighting Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
292-1271 Mast Gp -Accugrade Laser
| 29***71 | Mast Group; -Accugrade Laser | 1 |
| 30***87 | Control Group-Unprogrammed; (Transmission) | 1 |
| 35***39 | Software Group-Machine | 1 |
258-4135 Relay Gp -Main Power
| 25***35 | Relay Group; -Main Power | 1 |
| 34***36 | Control Group-Unprgmed Monitor; (Machine) | 1 |
| 35***58 | Software Group-Monitor | 1 |
266-1467 Sensor Gp-Position -Rotary
| 10***85 | Cap-Starting Motor | 1 |
| 10***12 | Kit-Contact; (Starting Motor) | 1 |
| 10***13 | Switch As; (Starting Motor)(12-Volt) | 1 |
191-8303 Sensor Gp-Speed
| 14***39 | Starting Motor Group-Electric; -12-Volt | 1 |
| 19***03 | Sensor Group-Speed | 1 |
262-3764 Sensor Gp-Speed
| 26***64 | Sensor Group-Speed; -Motor | 1 |
| 32***52 | Switch-Oil Press; (Engine) | 1 |
287-6181 Starting Motor Gp-Electric
| 10***05 | Cap-Receptacle | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
143-0539 Starting Motor Gp-Electric
| 10***74 | Seal-Connector | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
300-1071 Switch Gp-Pressure
| 03***12 | Terminal-Ring; (2-Ga, 1/4-In Screw)(Circuit Breaker) | 1 |
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
258-4100 Wiring Gp-Cab
| 03***12 | Terminal-Ring; (2-Ga, 1/4-In Screw)(Circuit Breaker) | 1 |
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
258-4115 Wiring Gp-Engine
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***62 | Screw-Machine; (4-40x0.63-In) | 4 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
258-4193 Wiring Gp-Engine
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
336-0913 Wiring Gp-Grade Control
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
258-4146 Wiring Gp-Heater
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***39 | Relay As | 5 |
258-4107 Wiring Gp-Machine
| 14***82 | Elbow As | 2 |
| 17***20 | Strap-Dual Clamp | 1 |
| 19***40 | Connector As | 1 |
258-4190 Wiring Gp-Quick Coupler
| 13***04 | Switch As-Pressure; (Power Train Oil Filter Bypass) | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
| 25***90 | Wiring Group-Quick Coupler | 1 |
258-4125 Wiring Gp-Work Tool
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***21 | Connector | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 4 |
Engine Arrangement
295-7115 Engine Ar-Primary
| 28***75 | Engine Ar-Primary | 1 |
| 29***15 | Engine Ar-Primary | 1 |
| 31***07 | Engine Ar-Primary | 1 |
287-8075 Engine Ar-Primary
| 23***80 | Valve Mechanism Group | 1 |
| 23***95 | Pump Group-Engine Oil | 1 |
| 23***04 | Glow Plug Group | 1 |
319-6807 Engine Ar-Primary
| 23***80 | Valve Mechanism Group | 1 |
| 23***95 | Pump Group-Engine Oil | 1 |
| 23***04 | Glow Plug Group | 1 |
295-7119 Installation Ar-Engine
| 25***47 | Mounting Group-Engine | 1 |
| 25***52 | Drain Group-Engine Oil | 1 |
| 25***69 | Guard Group-Belt | 1 |
Frame And Body
258-3800 Conversion Ar-Roading -Nacd
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 25***62 | Muffler & Mounting Group | 1 |
258-3810 Conversion Ar-Roading -Germany
| 17***16 | Chock | 1 |
| 25***10 | Conversion Ar-Roading; -Germany | 1 |
| 25***33 | Film-Notice; (Steering) | 1 |
315-6355 Conversion Ar-Roading
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***54 | Fastener; (Loop) (22cm) (X3) | 0 |
| 12***55 | Fastener-Hook; (18-cm Each) | 0 |
258-3812 Conversion Ar-Roading -Italy
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 12***54 | Fastener; (Loop) (22cm) (X3) | 0 |
258-3809 Conversion Ar-Roading -Outside Nacd
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 25***62 | Muffler & Mounting Group | 1 |
258-3841 Conversion Gp-Roading -Italy
| 25***66 | Counterweight; (Lh) | 1 |
| 25***67 | Counterweight; (Rh) | 1 |
| 25***41 | Conversion Group-Roading; -Italy | 1 |
258-3840 Conversion Gp-Roading -Germany
| 25***40 | Conversion Group-Roading; -Germany | 1 |
| 31***41 | Counterweight | 4 |
| 7X***49 | Bolt (M12x1.75x100mm); (M12x1.75x100-mm) | 4 |
258-3395 Counterweight Gp
| 25***78 | Plate As | 1 |
| 25***86 | Plate As | 1 |
| 25***12 | Plate | 1 |
258-2591 Counterweight Gp
| 14***32 | Pin As | 1 |
| 15***05 | Bolt-Shoulder | 2 |
| 22***40 | Latch As | 1 |
322-1644 Door As-Access -Vented
| 25***57 | Bearing-Sleeve | 4 |
| 25***94 | Link As | 1 |
| 25***73 | Frame As | 1 |
258-2594 Enclosure Gp-Engine
| 22***15 | Plate As | 1 |
| 24***77 | Bolt; (M8x1.25x12-mm) | 1 |
| 25***94 | Enclosure Group-Engine | 1 |
258-3775 Frame & Mtg Gp-Machine
| 25***75 | Frame & Mtg Group-Machine | 1 |
| 31***41 | Counterweight | 2 |
| 7X***49 | Bolt (M12x1.75x100mm); (M12x1.75x100-mm) | 4 |
258-3774 Frame Gp-Machine
| 25***74 | Frame Group-Machine | 1 |
| 28***67 | Film-Instruction; (Service Chart, Read Omm)(Service Chart) | 1 |
| 28***68 | Film-Instruction; (Service Chart, Read Omm)(Service Chart) | 1 |
150-8621 Guide Gp-Lines
| 12***18 | Seal; (1000-cm) | 0 |
| 15***21 | Guide Group-Lines | 1 |
| 17***79 | Insulation | 1 |
287-4160 Kit-Counterweight
| 08***48 | Lamp; (12-Volt, 5-Watt) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
312-1024 Kit-Engine Enclosure -Vented
| 17***91 | Nut-Spring | 4 |
| 17***16 | Chock | 1 |
| 25***33 | Film-Notice; (Steering) | 1 |
342-2685 Kit-Machine Enclosure Seal
| 17***91 | Nut-Spring | 4 |
| 17***16 | Chock | 1 |
| 17***47 | Pin | 1 |
310-6610 Kit-Machine Enclosure Seal -Debris Barrier
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
315-7815 Kit-Roading Conversion -Germany
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
258-3884 Kit-Roading Conversion -Lights, Mirrors
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
333-7435 Kit-Roading Conversion -Italy
| 15***80 | Washer-Hard; (22x38x6-mm Thk) | 8 |
| 25***89 | Mount | 4 |
| 25***91 | Plate-Lift | 4 |
333-7434 Kit-Roading Conversion -Germany
| 15***80 | Washer-Hard; (22x38x6-mm Thk) | 8 |
| 25***89 | Mount | 4 |
| 25***92 | Bracket As-Lift | 1 |
333-7436 Kit-Roading Conversion -Front
| 13***66 | Mirror Group-Rear View | 2 |
| 14***71 | Clamp; (Top)(Top) | 1 |
| 14***72 | Clamp; (Bottom)(Bottom) | 1 |
315-7816 Kit-Roading Conversion -Italy
| 15***80 | Washer-Hard; (22x38x6-mm Thk) | 8 |
| 25***91 | Plate-Lift | 4 |
| 31***16 | Kit-Roading Conversion; -Italy | 1 |
258-4390 Lifting Gp-Machine -Kit, Single Point
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
| 17***20 | Strap-Dual Clamp | 5 |
258-4410 Lifting Gp-Machine -Kit, Four Point
| 17***79 | Insulation | 1 |
| 25***10 | Lifting Group-Machine; -Kit, Four Point | 1 |
| 26***78 | Insulation | 1 |
258-4385 Lifting Gp-Machine -Four Point
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
258-3872 Mirror & Mtg Gp-Rear View -With Roading Light Mount
| 17***79 | Insulation | 2 |
| 25***72 | Mirror & Mtg Group-Rear View; -With Roading Light Mount | 1 |
| 29***55 | Insulation | 1 |
258-3848 Mounting Gp-Registration -Italian
| 25***48 | Mounting Group-Registration; -Italian | 1 |
| 30***53 | Axle As-Undercarriage; (Lh) | 1 |
| 30***54 | Axle As-Undercarriage; (Rh) | 1 |
307-6237 Mounting Gp-Roading Lights -Kit, Germany, Italy
| 30***47 | Tube As | 1 |
| 30***55 | Name-Plate (Operation; Loader), Bearing-Sleeve, Name-Plate (Loader:Std) | 2 |
| 30***05 | Frame As; (Lh) | 1 |
258-3496 Suppression Gp-Sound -Machine
| 25***96 | Suppression Group-Sound; -Machine | 1 |
| 30***47 | Tube As | 1 |
| 30***55 | Name-Plate (Operation; Loader), Bearing-Sleeve, Name-Plate (Loader:Std) | 2 |
294-4560 Suppression Gp-Sound -Machine
| 29***60 | Suppression Group-Sound; -Machine | 1 |
| 30***77 | Idler Group-Track | 1 |
| 30***88 | Roller Group-Track | 1 |
Fuel System
295-7465 Control Gp-Governor
| 13***87 | Clip | 1 |
| 19***36 | Insert-Threaded; (M6x1-Thd) | 3 |
| 23***96 | Screw-Flat Head; (M6x1x35-mm) | 4 |
295-7029 Lines Gp-Fuel
| 06***80 | Fitting | 1 |
| 11***01 | Bowl As-Water Collection | 1 |
| 11***18 | Ring-Retaining | 1 |
316-0473 Lines Gp-Fuel Injection
| 09***35 | Cap | 1 |
| 11***63 | Support | 4 |
| 11***64 | Hose | 5 |
340-5861 Pump Gp-Fuel Injection
| 14***17 | Bolt; (M10x1.25x25-mm) | 1 |
| 19***33 | Bolt | 2 |
| 21***10 | Nut | 1 |
316-0474 Pump Gp-Fuel Injection
| 14***17 | Bolt; (M10x1.25x25-mm) | 1 |
| 19***33 | Bolt | 2 |
| 21***10 | Nut | 1 |
258-3442 Pump Gp-Fuel Prm & Prim Filter -Water Separator
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 25***40 | Tank Group-Fuel | 1 |
258-2439 Tank & Mtg Gp-Fuel
| 00***64 | Seal-O-Ring | 1 |
| 14***28 | Elbow | 1 |
| 23***37 | Fitting | 1 |
258-2440 Tank Gp-Fuel
| 11***58 | Pulley-Alternator | 1 |
| 11***59 | Frame As-Alternator | 1 |
| 11***60 | Rotor As-Alternator | 1 |
Hydraulic System
227-8807 Accumulator Gp-Hydraulic -Uncharged
| 02***87 | Fitting-Grease; (Universal Joint) | 2 |
| 22***07 | Accumulator Group-Hydraulic; -Uncharged | 1 |
| 26***40 | Kit-Seal; (Swing Cylinder) | 1 |
149-0686 Accumulator Gp-Hydraulic -Charged
| 14***86 | Accumulator Group-Hydraulic; -Charged | 1 |
| 17***58 | Kit-Seal | 1 |
| 21***55 | Rod End As | 1 |
231-5274 Cylinder & Mtg Gp-Angle Blade
| 23***74 | Cylinder & Mtg Group-Angle Blade | 1 |
| 25***97 | Bearing-Sleeve | 1 |
| 27***70 | Kit-Seal; (Hydraulic Cylinder) | 1 |
230-5406 Cylinder & Mtg Gp-Angle Blade
| 02***87 | Fitting-Grease; (Universal Joint) | 2 |
| 23***06 | Cylinder & Mtg Group-Angle Blade | 1 |
| 26***40 | Kit-Seal; (Swing Cylinder) | 1 |
293-6264 Cylinder Gp-Bucket
| 21***24 | Kit-Seal; (Lift) | 2 |
| 25***14 | Cylinder Group-Tilt; -Rh | 1 |
| 25***15 | Cylinder Group-Tilt; -Lh | 1 |
278-1975 Cylinder Gp-Grapple -Industrial
| 21***45 | Fitting As; (Quick Disconnect, Female) | 1 |
| 21***46 | Fitting As; (Quick Disconnect, Female) | 1 |
| 27***75 | Cylinder Group-Grapple; -Industrial | 1 |
255-0943 Cylinder Gp-Grapple
| 21***43 | Fitting As; (Quick Disconnect, Male) | 1 |
| 21***44 | Fitting As; (Quick Disconnect, Male) | 1 |
| 25***43 | Cylinder Group-Grapple | 1 |
225-9521 Cylinder Gp-Hydraulic -Angle Blade
| 22***21 | Cylinder Group-Hydraulic; -Angle Blade | 1 |
| 25***76 | Lines Group-Hydraulic | 1 |
278-1969 Cylinder Gp-Hydraulic
| 25***78 | Lines Group-Hydraulic; -Work Tool Positioner | 1 |
| 25***69 | Manifold & Mtg Group-Control; -Work Tool Positioner | 1 |
| 27***69 | Cylinder Group-Hydraulic | 1 |
192-2640 Cylinder Gp-Hydraulic -Coupler
| 19***40 | Cylinder Group-Hydraulic; -Coupler | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
| 30***52 | Tee | 1 |
274-9930 Cylinder Gp-Hydraulic -Angle Blade
| 25***20 | Lines Group-Work Tool | 1 |
| 25***04 | Valve Group-Control | 1 |
| 25***82 | Lines Group-Hydraulic Fan; -Radiator | 1 |
274-9931 Cylinder Gp-Hydraulic -Angle Blade
| 25***23 | Lines Group-Work Tool; -High Flow | 1 |
| 25***05 | Valve & Mtg Group-Control | 1 |
| 25***86 | Lines Group-Hydraulic Fan | 1 |
293-5713 Cylinder Gp-Lift
| 25***23 | Lines Group-Work Tool; -High Flow | 1 |
| 25***05 | Valve & Mtg Group-Control | 1 |
| 25***86 | Lines Group-Hydraulic Fan | 1 |
258-2516 Cylinder Gp-Lift
| 25***20 | Lines Group-Work Tool | 1 |
| 25***04 | Valve Group-Control | 1 |
| 25***16 | Cylinder Group-Lift | 1 |
258-2559 Cylinder Gp-Lift Arm -Vertical Lift
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***13 | Coupling-Permanent | 1 |
293-5712 Cylinder Gp-Tilt -Lh
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
258-2515 Cylinder Gp-Tilt -Lh
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
258-2514 Cylinder Gp-Tilt -Rh
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***95 | Fitting As; (Quick Disconnect, Male) | 1 |
293-5711 Cylinder Gp-Tilt -Rh
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
218-5840 Fitting Gp-Hydraulic -Quick Disconnect, Male, High Flow
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
218-5841 Fitting Gp-Hydraulic -Quick Disconnect, Female, High Flow
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***95 | Fitting As; (Quick Disconnect, Male) | 1 |
285-2190 Fitting Gp-Hydraulic -Manual
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
258-3358 Hydraulic Ar -Work Tool Positioner
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***95 | Fitting As; (Quick Disconnect, Male) | 1 |
258-3735 Hydraulic Ar
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 16***89 | Hose As | 2 |
258-2567 Hydraulic Ar
| 14***15 | Connector As | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 6 |
| 14***42 | Connector Group | 2 |
258-3732 Hydraulic Ar
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 16***89 | Hose As | 2 |
258-2426 Hydraulic Ar
| 14***19 | Connector As | 2 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
258-2568 Hydraulic Ar
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 13***51 | Spacer; (11x19x6-mm Thk) | 1 |
| 14***25 | Connector As. | 4 |
295-7299 Hydraulic Ar
| 14***41 | Connector Group | 2 |
| 25***80 | Tube As | 1 |
| 25***81 | Tube As | 1 |
258-3911 Kit-Quick Coupler Conversion -Hydraulic
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***39 | Relay As | 1 |
| 14***15 | Connector As | 1 |
294-5580 Kit-Work Tool Positioner -Self-Leveling Hydraulics
| 11***61 | Hose As | 1 |
| 14***15 | Connector As | 2 |
| 14***16 | Connector Group | 2 |
154-5019 Lines Gp-Bucket
| 14***39 | Clamp | 2 |
| 14***54 | Elbow; (45) (-8/-8 Orb/Orfs) | 2 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 2 |
279-5416 Lines Gp-Bucket -Multipurpose
| 15***49 | Elbow As | 1 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 2 |
| 19***08 | Adapter | 1 |
279-5413 Lines Gp-Bucket -Multipurpose
| 14***97 | Block | 2 |
| 25***40 | Hose As | 4 |
| 25***64 | Tube As | 1 |
279-5414 Lines Gp-Bucket -Multipurpose
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
| 15***43 | Connector As. | 1 |
154-5052 Lines Gp-Bucket
| 11***61 | Hose As | 1 |
| 14***15 | Connector As | 2 |
| 14***16 | Connector Group | 2 |
285-6113 Lines Gp-Bucket -Utility
| 11***49 | Fitting As; (Quick Disconnect) | 2 |
| 14***52 | Elbow As. | 1 |
| 14***61 | Elbow Group | 1 |
293-0140 Lines Gp-Bucket -Multipurpose
| 11***49 | Fitting As; (Quick Disconnect) | 1 |
| 14***52 | Elbow As. | 1 |
| 14***61 | Elbow Group | 1 |
279-5415 Lines Gp-Bucket -Multipurpose
| 11***49 | Fitting As; (Quick Disconnect) | 1 |
| 14***62 | Elbow Group | 1 |
| 15***49 | Elbow As | 1 |
279-5412 Lines Gp-Bucket -Industrial
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 17***25 | Elbow As | 1 |
| 25***81 | Tube As | 1 |
177-1986 Lines Gp-Connecting
| 06***58 | Clamp | 2 |
| 10***03 | Plate-Cover | 3 |
| 14***93 | Elbow Group | 2 |
231-5273 Lines Gp-Connecting
| 10***03 | Plate-Cover | 3 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
| 14***93 | Elbow Group | 2 |
258-3724 Lines Gp-Coupler
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 13***51 | Spacer; (11x19x6-mm Thk) | 1 |
161-0187 Lines Gp-Grapple
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 13***51 | Spacer; (11x19x6-mm Thk) | 1 |
286-9279 Lines Gp-Grapple
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
| 15***43 | Connector As. | 1 |
286-9250 Lines Gp-Grapple
| 14***86 | Accumulator Group-Hydraulic; -Charged | 1 |
| 19***03 | Elbow As | 1 |
| 19***31 | Elbow; (45-Deg) | 1 |
258-2878 Lines Gp-Hydraulic -Work Tool Positioner
| 23***79 | Cover | 1 |
| 25***78 | Lines Group-Hydraulic; -Work Tool Positioner | 1 |
| 25***11 | Manifold Group-Control; -Angling Blade | 1 |
258-2876 Lines Gp-Hydraulic
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
258-2786 Lines Gp-Hydraulic Fan
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 15***79 | Kit-Seal; (Relief Valve, Conveyor Cont) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
258-2582 Lines Gp-Hydraulic Fan -Radiator
| 25***82 | Lines Group-Hydraulic Fan; -Radiator | 1 |
| 25***60 | Bracket As | 1 |
| 27***64 | Manifold Group-Control; -Motor, 2-Speed | 1 |
258-2587 Lines Gp-Hydraulic Fan -Aftercooler
| 25***87 | Lines Group-Hydraulic Fan; -Aftercooler | 1 |
| 25***02 | Manifold & Solenoid Group-Control; -Work Tool Positioner | 1 |
| 4P***34 | Clip-Ladder; (00800 mm ) | 1 |
258-2580 Lines Gp-Hydraulic Oil Cooler
| 18***51 | Washer-Hard; (5.3x8.8x2-mm Thk) | 8 |
| 19***08 | Seal-O-Ring | 1 |
| 21***14 | Seal-O-Ring | 1 |
258-2413 Lines Gp-Lift Cylinder
| 24***81 | Flange | 2 |
| 24***12 | Kit-Seal; (Solenoid Valve) | 1 |
| 25***34 | Valve Group-Solenoid; (Hydraulic Backup Engaged Gear) | 1 |
258-3276 Lines Gp-Lowering Control -Manual
| 24***81 | Flange | 2 |
| 24***12 | Kit-Seal; (Solenoid Valve) | 1 |
| 25***34 | Valve Group-Solenoid; (Hydraulic Backup Engaged Gear) | 1 |
258-3241 Lines Gp-Pump
| 23***28 | Coil As | 1 |
| 25***77 | Motor Group-Gear; (Fan, Demand) | 1 |
| 25***41 | Lines Group-Pump | 1 |
258-3242 Lines Gp-Pump
| 18***51 | Washer-Hard; (5.3x8.8x2-mm Thk) | 2 |
| 19***36 | Bolt-Socket Head; (M10x1.5x95-mm) | 4 |
| 21***77 | Seal-O-Ring | 1 |
258-2414 Lines Gp-Tilt Cylinder
| 15***13 | Plate | 1 |
| 15***41 | Pin | 2 |
| 15***42 | Pin | 2 |
258-2420 Lines Gp-Work Tool
| 15***13 | Pin | 2 |
| 25***20 | Lines Group-Work Tool | 1 |
| 6V***89 | Locknut; (M8x1.25-Thd) | 2 |
258-2423 Lines Gp-Work Tool -High Flow
| 15***41 | Pin | 2 |
| 15***42 | Pin | 2 |
| 25***23 | Lines Group-Work Tool; -High Flow | 1 |
258-3462 Manf & Solenoid Mtg Gp-Accum -Pilot Shutoff
| 25***62 | Manf & Solenoid Mtg Group-Accum; -Pilot Shutoff | 1 |
| 25***20 | Pump Group-Gear | 1 |
| 27***60 | Washer-Hard; (15x22x2.5-mm Thk) | 4 |
286-4887 Manifold & Lines Gp-Accum
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 2 |
| 25***54 | Pump Group-Piston; -High Flow | 1 |
| 25***21 | Pump Group-Gear | 1 |
258-3152 Manifold & Lines Gp-Control -Motor, 2-Speed
| 25***35 | Tank Group-Hydraulic | 1 |
| 25***47 | Bracket | 1 |
| 25***49 | Bracket As | 1 |
258-3463 Manifold & Mtg Gp-Control -Motor, 2-Speed
| 25***04 | Strainer As; (Hydraulic Tank) | 1 |
| 25***63 | Manifold & Mtg Group-Control; -Motor, 2-Speed | 1 |
| 26***90 | Gauge Group-Sight; (Hydraulic Tank) | 1 |
258-3469 Manifold & Mtg Gp-Control -Work Tool Positioner
| 11***52 | Spacer; (13x25x22.14-mm Thk) | 2 |
| 23***25 | Stud; (M10x1.5-Thd) | 1 |
| 25***09 | Valve Group-Control | 1 |
231-5278 Manifold & Mtg Gp-Control -Angling Blade
| 13***45 | Pad; (Connector) | 1 |
| 14***37 | Cap As-Filler; (Hydraulic Tank) | 1 |
| 23***78 | Manifold & Mtg Group-Control; -Angling Blade | 1 |
258-2802 Manifold & Solenoid Gp-Control -Work Tool Positioner
| 25***02 | Manifold & Solenoid Group-Control; -Work Tool Positioner | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 6V***97 | Seal (Later Machines And Field Installed) | 1 |
274-8563 Manifold Gp-Control -Pilot Shutoff
| 00***82 | Spring | 3 |
| 12***16 | Bolt-Shoulder | 1 |
| 14***31 | Valve-Check | 3 |
258-9011 Manifold Gp-Control -Angling Blade
| 11***52 | Spacer; (13x25x22.14-mm Thk) | 2 |
| 23***25 | Stud; (M10x1.5-Thd) | 1 |
| 25***08 | Valve Group-Control | 1 |
274-8564 Manifold Gp-Control -Motor, 2-Speed
| 18***54 | Valve Group-Solenoid; -Auxiliary | 6 |
| 19***00 | Valve Group-Solenoid; -12-Volt-Work Tool | 2 |
| 20***71 | Cap | 1 |
291-0010 Manifold Gp-Control -Quick Coupler
| 11***61 | Seal Kit; (Includes Seals, Thrust Ring, Stem And Connectors) | 1 |
| 20***71 | Valve Group-Manual; (Coupler Pin, Lift Arm Lwr Cont) | 1 |
| 20***73 | Valve Group-Manual; (Coupler Pin, Lift Arm Lwr Cont) | 1 |
258-2579 Motor & Mtg Gp-Hydraulic Fan
| 13***76 | Seal-O-Ring | 1 |
| 25***79 | Motor & Mtg Group-Hydraulic Fan | 1 |
295-7300 Motor & Mtg Gp-Hydraulic Fan
| 12***98 | Seat | 1 |
| 12***99 | Seat | 1 |
| 13***49 | Connector | 1 |
278-8720 Motor Gp-Gear -Hydraulic Fan
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
| 21***73 | Nut; (1/2-28-Thd) | 1 |
| 22***29 | Coil As-Solenoid; (12-Volt)(Modulating Valve) | 1 |
286-9248 Mounting Gp-Cylinder -Grapple Bucket
| 13***86 | Edge Group-Cutting | 1 |
| 17***81 | Blade Group-Angling | 1 |
| 17***83 | Spring Group-Blade | 1 |
156-0891 Mounting Gp-Cylinder -Industrial
| 14***91 | Pin As | 2 |
| 14***94 | Pin | 1 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
165-8731 Mounting Gp-Cylinder -Utility
| 15***62 | Film-Information; (Tie-Down Location) | 2 |
| 16***31 | Mounting Group-Cylinder; -Utility | 1 |
| 18***33 | Step Group-Material Handling Arm | 1 |
154-5011 Mounting Gp-Cylinder
| 15***11 | Mounting Group-Cylinder | 1 |
| 20***71 | Kit-Seal; (Solenoid Valve) | 1 |
| 21***61 | Flange | 1 |
258-3522 Pump & Mtg Gp-Gear
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
258-3466 Pump & Mtg Gp-Gear
| 14***41 | Edge Group-Cutting | 1 |
| 17***82 | Blade Group-Angling | 1 |
| 17***83 | Spring Group-Blade | 1 |
258-3523 Pump Gp-Piston & Gear -High Flow
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
258-2434 Tank & Mtg Gp-Hydraulic
| 22***21 | Trunnion As | 1 |
| 22***79 | Plate As | 1 |
| 22***28 | Plate As | 1 |
258-2435 Tank Gp-Hydraulic
| 22***21 | Trunnion As | 1 |
| 22***79 | Plate As | 1 |
| 22***28 | Plate As | 1 |
258-2806 Tank Gp-Hydraulic
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***40 | Pin | 2 |
| 16***19 | Pin As | 2 |
258-2505 Valve & Mtg Gp-Control
| 16***89 | Tack-Fastener | 4 |
| 22***12 | Blade As-Angling | 1 |
| 22***46 | Edge Group-Bit & Cutting | 1 |
6e-4701 Valve Gp-Check
| 16***89 | Tack-Fastener | 4 |
| 22***45 | Edge Group-Bit & Cutting | 1 |
| 22***25 | Frame Group-Blade | 1 |
258-2508 Valve Gp-Control
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***80 | Blade Group-Multipurpose Bucket | 1 |
| 16***89 | Tack-Fastener | 4 |
258-2509 Valve Gp-Control
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 25***09 | Valve Group-Control | 1 |
258-2504 Valve Gp-Control
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 25***04 | Valve Group-Control | 1 |
336-1325 Valve Gp-Control
| 15***59 | Edge | 1 |
| 33***25 | Valve Group-Control | 1 |
336-1324 Valve Gp-Control -Lift Arm
| 15***37 | Edge | 1 |
| 33***24 | Valve Group-Control; -Lift Arm | 1 |
112-1817 Valve Gp-Manual
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
295-1799 Valve Gp-Relief
| 15***77 | Edge | 1 |
| 29***99 | Valve Group-Relief; -Main | 1 |
211-3014 Valve Gp-Shuttle -High Flow
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 21***14 | Valve Group-Shuttle; -High Flow | 1 |
195-9700 Valve Gp-Solenoid -12-Volt
| 19***00 | Valve Group-Solenoid; -12-Volt-Work Tool | 1 |
| 19***16 | Edge | 1 |
185-4254 Valve Gp-Solenoid
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 18***54 | Valve Group-Solenoid; -Auxiliary | 1 |
Implements
258-2899 Pin & Link Gp-Lift Arm -With Support
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 25***99 | Pin & Link Group-Lift Arm; -With Support | 1 |
Lubrication System
314-9901 Filter Gp-Engine Oil
| 09***37 | Seal-O-Ring | 1 |
| 09***71 | Seal-O-Ring (Id=94.40mm) | 1 |
| 1R***34 | Filter-Engine Oil | 1 |
287-5377 Lines Gp-Engine Oil
| 23***94 | Strainer As-Oil; (Engine) | 1 |
| 23***13 | Seal-O-Ring | 1 |
| 28***77 | Lines Group-Engine Oil | 1 |
235-5895 Pump Gp-Engine Oil
| 10***44 | Nut | 1 |
| 10***83 | Seal-O-Ring | 1 |
| 11***41 | Pump As-Oil | 1 |
287-5665 Valve Gp-Engine Oil Relief
| 10***25 | Valve As; (Oil Bypass)(Engine) | 1 |
| 23***96 | Gasket | 1 |
| 23***96 | Gasket | 1 |
Machine Arrangement
304-1930 Chassis Ar
| 15***21 | Guide Group-Lines | 1 |
| 25***39 | Tank & Mtg Group-Fuel | 1 |
| 25***59 | Cylinder Group-Lift Arm; -Vertical Lift | 1 |
304-1899 Common Ar
| 25***95 | Counterweight Group | 1 |
| 25***00 | Cab Ar-Enclosed Rops | 1 |
| 29***19 | Installation Ar-Engine | 1 |
342-5011 Control Ar-Machine -Aux Proportional Flow
| 25***04 | Control Group-Electrohydraulic; -Lh, High Flow | 1 |
| 25***06 | Control Group-Electrohydraulic; -Rh | 1 |
| 25***25 | Wiring Group-Work Tool | 1 |
342-5010 Control Ar-Machine -Aux Proportional Flow
| 25***03 | Control Group-Electrohydraulic; -Lh | 1 |
| 25***06 | Control Group-Electrohydraulic; -Rh | 1 |
| 34***10 | Control Ar-Machine; -Auxiliary Proportional Flow | 1 |
342-5009 Control Ar-Machine -On, Off Auxiliary Control
| 25***03 | Control Group-Electrohydraulic; -Lh | 1 |
| 25***05 | Control Group-Electrohydraulic; -Rh | 1 |
| 34***09 | Control Ar-Machine; -On, Off Auxiliary Control | 1 |
304-1933 Machine Ar-Special
| 25***32 | Lines Group-Hydrostatic | 1 |
| 25***52 | Manifold & Lines Group-Control; -Motor, 2-Speed | 1 |
| 25***58 | Hydraulic Ar; -Work Tool Positioner | 1 |
304-1932 Machine Ar-Special
| 25***32 | Lines Group-Hydrostatic | 1 |
| 25***52 | Manifold & Lines Group-Control; -Motor, 2-Speed | 1 |
| 25***58 | Hydraulic Ar; -Work Tool Positioner | 1 |
304-1923 Machine Ar-Special
| 25***52 | Manifold & Lines Group-Control; -Motor, 2-Speed | 1 |
| 25***58 | Hydraulic Ar; -Work Tool Positioner | 1 |
| 25***60 | Lines Group-Parking Brake | 1 |
304-1931 Machine Ar-Special
| 25***26 | Hydraulic Ar | 1 |
| 25***32 | Lines Group-Hydrostatic | 1 |
| 25***52 | Manifold & Lines Group-Control; -Motor, 2-Speed | 1 |
Operator Station
258-4229 Accessory Gp-Cab
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 2 |
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
186-6190 Accumulator Gp-Refrigerant -Charged
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
| 18***90 | Accumulator Group-Refrigerant; -With Desiccant | 1 |
| 21***89 | Screw; (M4x25-mm) | 3 |
176-3900 Accumulator Gp-Refrigerant -Uncharged
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 17***00 | Accumulator Group-Refrigerant; -With Desiccant | 1 |
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
258-4261 Air Conditioner & Mounting Gp
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
258-4360 Air Conditioner Ar
| 25***69 | Cover | 1 |
| 25***27 | Screw-Truss Head; (No 12x17.46-mm) | 2 |
| 25***28 | Plate | 1 |
258-4290 Air Conditioner Gp
| 13***39 | Nut; (U-Type Retainer) | 10 |
| 21***06 | Screw-Truss Head; (M6x1x16-mm) | 10 |
| 25***27 | Screw-Truss Head; (No 12x17.46-mm) | 6 |
258-4311 Armrest & Mounting Gp
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 2 |
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
269-0257 Base As-Joystick -Rh
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 2 |
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
269-0258 Base As-Joystick -Lh
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 2 |
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
258-3743 Cab Ar-Enclosed Rops
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
258-3681 Cab Ar-Enclosed Rops
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
258-3741 Cab Ar-Enclosed Rops
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
258-4000 Cab Ar-Enclosed Rops
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
298-7198 Cable Gp-Control -Manual Lowering
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
276-0074 Cable Gp-Control
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
258-2468 Compressor & Mtg Gp-Refrig
| 14***71 | Louver As | 6 |
| 16***55 | Bolt; (M6x1x35-mm) | 2 |
| 20***85 | Bolt; (M8x1.25x35-mm) | 1 |
266-2430 Control & Wiring Gp-Air & Temp
| 15***80 | Washer-Hard; (22x38x6-mm Thk) | 8 |
| 25***89 | Mount | 4 |
| 25***98 | Film-Certification; (Ops, Read Omm) | 1 |
258-4299 Control Gp-Air & Temperature
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***56 | Plug; (Switch) | 1 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
258-3405 Control Gp-Electrohydraulic -Rh
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
258-3404 Control Gp-Electrohydraulic -Lh, High Flow
| 10***74 | Seal-Connector | 3 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
258-3407 Control Gp-Electrohydraulic -Rh, High Flow
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 16***72 | Speaker As-Radio | 2 |
| 17***37 | Connector; (Radio) | 1 |
258-3406 Control Gp-Electrohydraulic -Rh
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 16***72 | Speaker As-Radio | 2 |
| 17***37 | Connector; (Radio) | 1 |
258-3403 Control Gp-Electrohydraulic -Lh
| 25***69 | Cover | 1 |
| 25***03 | Control Group-Electrohydraulic; -Lh | 1 |
| 25***46 | Wiring Group-Heater | 1 |
272-1790 Control Gp-Handle -Lh
| 00***10 | Elbow | 1 |
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 2 |
| 10***74 | Seal-Connector | 2 |
269-0266 Control Gp-Joystick -Lh
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***15 | Connector | 1 |
269-0264 Control Gp-Joystick -Rh
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***15 | Connector | 1 |
269-0262 Control Gp-Joystick -Rh
| 12***70 | Screw-Machine; (M6x1x40-mm) | 3 |
| 17***91 | Nut-Spring | 3 |
| 25***79 | Knob As | 1 |
269-0263 Control Gp-Joystick -Rh, High Flow
| 10***96 | Clip | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***11 | Support | 1 |
269-0265 Control Gp-Joystick -Lh, High Flow
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***15 | Connector | 1 |
258-3268 Cover Gp-Cab
| 00***10 | Elbow | 1 |
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 2 |
| 10***74 | Seal-Connector | 2 |
258-4314 Cover Gp-Console -Rh, Lh
| 25***85 | Window Group-Cab; -Side, Lh | 1 |
| 25***86 | Window Group-Cab; -Side, Rh | 1 |
| 25***14 | Cover Group-Console; -Rh, Lh | 1 |
258-4009 Cover Gp-Instrument Panel
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 25***09 | Cover Group-Instrument Panel | 1 |
| 26***33 | Switch As-Rocker; (Control Pattern Change) | 1 |
258-4070 Door & Mtg Gp-Cab -With Cab Tilt Gas Spring
| 25***70 | Door & Mtg Group-Cab; -With Cab Tilt Gas Spring | 1 |
| 28***81 | Spacer,10.4mm Id X 22mm Od X 35mm L; Spacing Bar, Spacer,10.4mm Id X 22mm Od X 35mm L, Film-Instruction; (Control Pattern, Rh) | 1 |
| 28***82 | Film-Instruction; (Control Pattern, Lh) | 1 |
258-4440 Door & Mtg Gp-Cab -With Cab Tilt Gas Spring
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 13***42 | Screw-Self-Tapping; (M5x2.3x18.8-mm) | 4 |
| 25***40 | Door & Mtg Group-Cab; -With Cab Tilt Gas Spring | 1 |
258-4080 Door & Mtg Gp-Cab -With Cab Tilt Gas Spring
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 13***42 | Screw-Self-Tapping; (M5x2.3x18.8-mm) | 4 |
| 25***80 | Door & Mtg Group-Cab; -With Cab Tilt Gas Spring | 1 |
258-4087 Door Gp-Cab -Polycarbonate
| 11***27 | Screw-Machine; (M6x1x30-mm) | 2 |
| 13***27 | Seal; (69-cm) | 0 |
| 17***22 | Seal; (230-cm Each) | 0 |
258-4442 Door Gp-Cab
| 10***96 | Clip | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***11 | Support | 1 |
258-4086 Door Gp-Cab -Glass
| 12***78 | Locknut; (M6x1-Thd) | 1 |
| 25***86 | Door Group-Cab; -Glass | 1 |
| 28***41 | Nut; (M10x1.5-mm Thd) | 1 |
258-4252 Duct & Filter Gp-Cab Air
| 00***10 | Elbow | 1 |
| 13***53 | Hose; (192.5cm) (X2) | 0 |
| 17***20 | Strap-Dual Clamp | 3 |
258-4400 Guard Gp-Rops/Fops -Kit
| 25***00 | Guard Group-Rops/Fops; -Kit | 1 |
| 5P***58 | Sleeve; (Cable Splice) | 1 |
| 5P***00 | Key Total 2 Pieces Per Unit; (Literature Compartment) | 2 |
298-7197 Handle Gp
| 28***70 | Mirror As; (Rear View) | 1 |
| 29***97 | Handle Group | 1 |
| 3B***05 | Washer,Lock Tube Assembly Mounting; Used On Engine P/N 5r698 | 1 |
258-4251 Heater & Mtg Gp-Cab
| 21***84 | Mirror As | 1 |
| 25***51 | Heater & Mtg Group-Cab | 1 |
| 3B***05 | Washer,Lock Tube Assembly Mounting; Used On Engine P/N 5r698 | 1 |
258-4350 Heater Ar-Cab
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
| 25***50 | Heater Ar-Cab | 1 |
258-4270 Heater Gp-Cab
| 13***40 | Locknut; (M8x1.25-Thd) | 2 |
| 21***52 | Screw-Truss Head; (M8x1.25x30-mm) | 2 |
| 25***70 | Heater Group-Cab | 1 |
337-3991 Installation Gp-Radio -Kit
| 08***77 | Lamp Group-Dome; (12-Volt) | 1 |
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 74 |
| 09***34 | Terminal-Blade; (18-Ga To 22-Ga) | 4 |
258-4066 Installation Gp-Radio
| 09***65 | Spacer; (17x40x3-mm Thk) | 2 |
| 16***95 | Washer; (16.5x71.5x3-mm Thk) | 4 |
| 19***37 | Insert-Threaded; (M8x1.25-Thd) | 1 |
350-9036 Kit-Air Cond & Heater Instl
| 25***44 | Cable As; (Low Idle) | 1 |
| 25***73 | Cable As; (Hand Control) | 1 |
| 32***83 | Pedal Group-Governor | 1 |
280-6079 Kit-Air Cond & Heater Instl
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 13***42 | Screw-Self-Tapping; (M5x2.3x18.8-mm) | 4 |
| 26***20 | Switch As-Rocker; (Creeper Control) | 1 |
305-8044 Kit-Air Conditioner Breather
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 4 |
| 12***78 | Locknut; (M6x1-Thd) | 1 |
| 16***54 | Kit-Service; (Pedal) | 1 |
280-6081 Kit-Air Conditioner Instl -Conversion
| 25***73 | Cable As; (Hand Control) | 1 |
| 28***81 | Kit-Air Conditioner Instl; -Conversion | 1 |
| 2R***64 | Ring-Retaining | 1 |
350-9037 Kit-Air Conditioner Instl
| 19***54 | Sleeve | 1 |
| 35***37 | Kit-Air Conditioner Instl | 1 |
280-6084 Kit-Cab Door & Mounting -Polycarbonate
| 13***66 | Lead-Antenna | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 17***17 | Support-Radio | 1 |
258-4443 Kit-Cab Door & Mounting
| 19***54 | Sleeve | 1 |
| 25***43 | Kit-Cab Door & Mounting | 1 |
258-2473 Kit-Cab Door & Mounting -Glass
| 13***90 | Bushing; (Radio Mount) | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 17***37 | Connector; (Radio) | 1 |
280-6077 Kit-Cab Heater & Mounting
| 19***54 | Sleeve | 1 |
| 28***77 | Kit-Cab Heater & Mounting | 1 |
258-2472 Kit-Cab Window -Side
| 19***54 | Sleeve | 1 |
| 25***72 | Kit-Cab Window; -Side | 1 |
292-7927 Kit-Control Pattern Change -Dedicated
| 13***90 | Bushing; (Radio Mount) | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 17***37 | Connector; (Radio) | 1 |
258-4110 Kit-Control Pattern Change -Selectable
| 19***54 | Sleeve | 1 |
| 25***10 | Kit-Control Pattern Change; -Selectable | 1 |
258-4111 Kit-Instrument Panel -Includes Creeper Control, Rh
| 13***90 | Bushing; (Radio Mount) | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 17***37 | Connector; (Radio) | 1 |
258-4045 Lever Gp-Governor
| 19***54 | Sleeve | 1 |
| 25***45 | Lever Group-Governor | 1 |
327-8941 Lever Gp-Governor
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 16***72 | Speaker As-Radio | 2 |
| 17***37 | Connector; (Radio) | 1 |
258-4020 Liner Gp-Cab
| 25***20 | Liner Group-Cab | 1 |
| 25***55 | Seat Group-Suspension; -Air | 1 |
| 25***11 | Armrest & Mounting Group | 1 |
258-4433 Liner Gp-Cab
| 15***83 | Washer-Hard; (8.4x35x2.5-mm Thk) | 4 |
| 25***02 | Seat & Armrest Group; -Suspension | 1 |
| 25***33 | Liner Group-Cab | 1 |
258-4266 Lines Gp-Air Conditioner
| 15***83 | Washer-Hard; (8.4x35x2.5-mm Thk) | 4 |
| 25***66 | Lines Group-Air Conditioner | 1 |
| 25***01 | Seat & Armrest Group | 1 |
258-4300 Lines Gp-Heater
| 25***51 | Seat & Mounting Group; -Suspension | 1 |
| 25***00 | Lines Group-Heater | 1 |
| 25***14 | Cover Group-Console; -Rh, Lh | 1 |
6v-1970 Literature Gp
| 25***52 | Seat & Mounting Group | 1 |
| 25***14 | Cover Group-Console; -Rh, Lh | 1 |
| 6V***70 | Literature Group; (Literature Compartment) | 1 |
305-8034 Mirror Gp-Rear View
| 2D***12 | Washer; (7/16x15/16x1/4-In Thk) | 2 |
| 30***34 | Mirror Group-Rear View | 1 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 2 |
258-4230 Mirror Gp-Rear View
| 25***30 | Mirror Group-Rear View | 1 |
| 2D***12 | Washer; (7/16x15/16x1/4-In Thk) | 2 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 2 |
330-5011 Motor Gp-Window Wiper
| 09***68 | Washer; (5x16x1.2-mm Thk) | 2 |
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 2 |
| 13***90 | Bolt-Carriage; (M8x1.25x30-mm) | 2 |
295-3172 Mounting Gp-Armrest -Rh
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 4 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
295-3171 Mounting Gp-Armrest -Lh
| 09***68 | Washer; (5x16x1.2-mm Thk) | 2 |
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 2 |
| 13***90 | Bolt-Carriage; (M8x1.25x30-mm) | 2 |
258-4220 Mounting Gp-Rops -Includes Step
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 4 |
| 1P***10 | Washer; (0.391x0.812x0.067-In Thk) | 4 |
| 25***20 | Mounting Group-Rops; -Includes Step | 1 |
258-4162 Panel Gp-Instrument
| 09***25 | Pin-Clevis | 1 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 2 |
| 15***82 | Spring-Gas; (Non-Locking) | 1 |
258-4163 Panel Gp-Instrument -Rh
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***11 | Screw-Machine; (3/8-16x0.75-In) | 1 |
325-8383 Pedal Gp-Governor
| 1D***77 | Bolt-Round Head; (3/8-16x1-In) | 2 |
| 32***83 | Pedal Group-Governor | 1 |
| 5T***69 | Clamp | 2 |
327-8937 Pedal Gp-Governor
| 25***83 | Window As; (Lh Front Sliding Glass) | 1 |
| 25***84 | Window As; (Lh Rear Sliding Glass) | 1 |
| 25***65 | Latch As | 1 |
258-4042 Pedal Gp-Governor
| 17***91 | Nut-Spring | 4 |
| 25***42 | Pedal Group-Governor | 1 |
| 25***33 | Visor Group-Cab; -Lh | 1 |
233-3123 Radio Gp -Am/Fm/Wb
| 10***57 | Strip; (Locking) (275cm) | 0 |
| 10***56 | Seal; (275cm) | 0 |
| 23***23 | Radio Group; -Am/Fm/Wb | 1 |
284-8955 Radio Gp -Am/Fm/Wb/Sirius/ Cd Player
| 12***59 | Clamp-Hose | 2 |
| 12***71 | Clamp-Hose | 1 |
| 18***07 | Clamp-Hose | 1 |
241-4936 Radio Gp -Am/Fm/Wb/Cd Player
| 24***36 | Radio Group; -Am/Fm/Wb/Cd Player | 1 |
| 25***85 | Window Group-Cab; -Side, Lh | 1 |
| 25***86 | Window Group-Cab; -Side, Rh | 1 |
200-5729 Radio Gp -Am/Fm/Wb
| 20***29 | Radio Group; -Am/Fm/Wb | 1 |
| 25***82 | Frame As; (Rh) | 1 |
| 25***65 | Latch As | 1 |
262-9163 Radio Gp -Am/Fm Cassette
| 25***31 | Film-Identification; (High Flow Xps) | 2 |
| 26***63 | Radio Group; -Am/Fm/Wb/Cd Player | 1 |
337-3992 Radio Gp -Am/Fm
| 19***10 | Film-Identification; (Synthetic Hydraulic Oil, Read Omm) | 2 |
| 33***92 | Radio Group; -Am/Fm | 1 |
331-5291 Radio Gp -Am/Fm/Wb/Cd Player
| 15***53 | Film-Information; (Read Omm) | 1 |
| 16***76 | Film; (Identification) (12v) (On Rear Console Behind Operators Seat) | 1 |
| 21***02 | Film-Warning; (No Weld, No Drill, Read Omm) | 1 |
288-1744 Radio Gp -Am/Fm/Wb/Cd Player
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 15***35 | Film-Warning; (Crush Hazard, Stay Back) | 1 |
| 22***42 | Film-Warning; (Crush Hazard, Stay Back, U.S.) | 2 |
331-5292 Radio Gp -Am, Fm
| 15***53 | Film-Information; (Read Omm) | 1 |
| 16***76 | Film; (Identification) (12v) (On Rear Console Behind Operators Seat) | 1 |
| 21***02 | Film-Warning; (No Weld, No Drill, Read Omm) | 1 |
284-8954 Radio Gp -Am/Fm/Wb/Xm/ Cd Player
| 25***23 | Film-Identification; (Caterpillar) | 1 |
| 25***24 | Film-Identification; (Cat, Lh) | 1 |
| 25***25 | Film-Identification; (Cat, Rh) | 1 |
284-8953 Radio Gp -Am/Fm/Wb/Cd Player
| 28***53 | Radio Group; -Am/Fm/Wb/Cd Player | 1 |
| 29***10 | Film-Identification; (Two Speed) | 2 |
258-4402 Seat & Armrest Gp -Suspension
| 25***02 | Seat & Armrest Group; -Suspension | 1 |
258-4401 Seat & Armrest Gp
| 25***01 | Seat & Armrest Group | 1 |
258-4052 Seat & Mounting Gp
| 25***52 | Seat & Mounting Group | 1 |
258-4051 Seat & Mounting Gp -Suspension
| 25***51 | Seat & Mounting Group; -Suspension | 1 |
258-4320 Seat Ar-Suspension -Mechanical
| 25***20 | Seat Ar-Suspension; -Mechanical | 1 |
258-4330 Seat Ar-Suspension -Air
| 25***30 | Seat Ar-Suspension; -Air | 1 |
258-4096 Seat Belt Gp -Retractable
| 25***96 | Seat Belt Group; -Retractable | 1 |
258-4095 Seat Belt Gp -Retractable
| 25***95 | Seat Belt Group; -Retractable | 1 |
273-5913 Seat Gp -Cloth, Suspension
| 27***13 | Seat Group; -Cloth, Suspension | 1 |
305-7096 Seat Gp -Vinyl
| 30***96 | Seat Group; -Vinyl | 1 |
258-4055 Seat Gp-Suspension -Air
| 25***55 | Seat Group-Suspension; -Air | 1 |
258-4054 Seat Gp-Suspension -Mechanical
| 25***54 | Seat Group-Suspension; -Mechanical | 1 |
258-4017 Spring Gp-Gas -Includes Lift Handle
| 25***17 | Spring Group-Gas; -Includes Lift Handle | 1 |
273-5914 Suspension Gp-Seat -Air
| 27***14 | Suspension Group-Seat; -Air | 1 |
273-9611 Suspension Gp-Seat -Mechanical
| 27***11 | Suspension Group-Seat; -Mechanical | 1 |
258-3497 Visor Gp-Cab
| 25***97 | Visor Group-Cab | 1 |
258-4233 Visor Gp-Cab -Lh
| 25***33 | Visor Group-Cab; -Lh | 1 |
258-4090 Window Gp-Cab -Side
| 25***90 | Window Group-Cab; -Side | 1 |
258-3286 Window Gp-Cab -Side, Rh
| 25***86 | Window Group-Cab; -Side, Rh | 1 |
258-4010 Window Gp-Cab
| 25***10 | Window Group-Cab | 1 |
258-3285 Window Gp-Cab -Side, Lh
| 25***85 | Window Group-Cab; -Side, Lh | 1 |
Power Train
258-2581 Filter & Lines Gp-Hydraulic
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***21 | Connector | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 4 |
223-9974 Filter Gp-Oil -Hydraulic
| 17***87 | Connector As | 1 |
| 1F***67 | Clip 7t***28 Cable As To Fan Shroud | 2 |
| 22***74 | Filter Group-Oil; -Hydraulic | 1 |
258-3960 Lines Gp-Hydrostatic
| 10***93 | Poppet | 1 |
| 14***27 | Connector Group | 2 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 1 |
258-2432 Lines Gp-Hydrostatic
| 10***93 | Poppet | 1 |
| 14***27 | Connector Group | 2 |
| 14***62 | Elbow Group | 1 |
258-3860 Lines Gp-Parking Brake
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 4 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 2 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 4 |
258-2589 Manifold Gp-Return
| 25***89 | Manifold Group-Return | 1 |
| 27***23 | Kit-Cover | 1 |
| 27***25 | Kit-Duo-Cone Seal | 1 |
304-1860 Motor & Mtg Gp-Hydrostatic
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 2 |
| 25***54 | Pump Group-Piston; -High Flow | 1 |
| 25***65 | Pump Group-Gear | 1 |
307-3045 Motor Gp-Piston
| 09***94 | Ring-Retaining | 1 |
| 16***42 | Washer-Hard; (14.8x27x3-mm Thk) | 2 |
| 16***39 | Bolt; (M14x2x40-mm) | 2 |
258-3467 Mounting Gp-Pump
| 11***04 | Bolt-Socket Head; (M12x1.75x45-mm) | 4 |
| 23***86 | Kit-Bearing; (Generator Pump) | 1 |
| 23***87 | Kit-Bearing; (Generator Pump) | 1 |
258-3318 Mounting Gp-Pump
| 25***18 | Mounting Group-Pump | 1 |
| 27***36 | Kit-Seal; (Piston Pump) | 1 |
| 27***37 | Valve Group-Pump Control | 2 |
258-2407 Pump & Mtg Gp-Hydrostatic
| 25***07 | Pump & Mtg Group-Hydrostatic | 1 |
| 30***16 | Sprocket-Track | 1 |
| 3E***56 | Washer-Hard; (17.5x30x6-mm Thk) | 12 |
258-2405 Pump Gp-Piston -Hydrostatic
| 25***05 | Pump Group-Piston; -Hydrostatic | 1 |
| 25***62 | Muffler & Mounting Group | 1 |
| 25***79 | Motor & Mtg Group-Hydraulic Fan | 1 |
258-2554 Pump Gp-Piston -High Flow
| 25***62 | Muffler & Mounting Group | 1 |
| 25***54 | Pump Group-Piston; -High Flow | 1 |
| 25***79 | Motor & Mtg Group-Hydraulic Fan | 1 |
304-1918 Sprocket Gp
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 25***62 | Muffler & Mounting Group | 1 |
Service Equipment And Supplies
304-1964 Film Gp
| 30***64 | Film Group | 1 |
289-0848 Film Gp -2-Speed
| 28***48 | Film Group; -2-Speed | 1 |
258-3230 Film Gp -High Flow Xps
| 25***30 | Film Group; -High Flow Xps | 1 |
348-6735 Kit-Muffler
| 34***35 | Kit-Muffler | 1 |
304-1864 Plate & Film Gp
| 30***64 | Plate & Film Group | 1 |
286-9251 Plate & Film Gp
| 28***51 | Plate & Film Group | 1 |
304-5237 Plate & Film Gp
| 30***37 | Plate & Film Group | 1 |
304-1862 Plate & Film Gp
| 30***62 | Plate & Film Group | 1 |
247-0678 Plate & Film Gp
| 24***78 | Plate & Film Group | 1 |
Undercarriage
304-1850 Axle Gp-Undercarriage
| 30***50 | Axle Group-Undercarriage | 1 |
| 30***78 | Idler Group-Track | 1 |
| 8T***39 | Washer; (6.0mm Thk)(M21.5x6x45mm) | 2 |
304-1903 Frame Gp-Track Roller -Lh
| 16***66 | Toric Ring | 2 |
| 17***82 | Seal Group-Duo-Cone | 2 |
| 30***75 | Collar-Seal | 1 |
304-1904 Frame Gp-Track Roller -Rh
| 30***94 | Idler Group-Track | 1 |
| 30***04 | Frame Group-Track Roller; -Rh | 1 |
| 8T***39 | Washer; (6.0mm Thk)(M21.5x6x45mm) | 2 |
356-2463 Frame Gp-Track Roller -Lh
| 16***66 | Toric Ring | 2 |
| 17***82 | Seal Group-Duo-Cone | 2 |
| 30***75 | Collar-Seal | 1 |
356-2467 Frame Gp-Track Roller -Rh
| 30***25 | Plate | 4 |
| 30***39 | Tape (Accent Stripe), Spacer | 4 |
| 35***67 | Frame Group-Track Roller; -Rh | 1 |
304-1908 Idler Gp-Front
| 30***90 | Roller Group-Track; -Triple Flange | 1 |
| 30***08 | Idler Group-Front | 1 |
| 8T***39 | Washer; (6.0mm Thk)(M21.5x6x45mm) | 2 |
304-1877 Idler Gp-Track
| 10***88 | Ring-Retaining | 2 |
| 17***83 | Seal Group-Duo-Cone | 2 |
| 21***42 | Ring-Toric | 2 |
304-1893 Idler Gp-Track
| 30***88 | Roller Group-Track | 4 |
| 30***93 | Manifold, Idler Group-Track | 2 |
| 30***98 | Track Adjuster & Recoil Group | 1 |
304-1894 Idler Gp-Track
| 30***88 | Roller Group-Track | 4 |
| 30***93 | Manifold, Idler Group-Track | 1 |
| 30***94 | Idler Group-Track | 1 |
304-1878 Idler Gp-Track
| 09***59 | Pin-Cotter | 1 |
| 22***82 | Seal-Wiper | 1 |
| 23***92 | Fitting-Grease | 1 |
304-1852 Mounting Gp-Axle
| 30***52 | Mounting Group-Axle | 1 |
| 30***60 | Motor & Mtg Group-Hydrostatic | 1 |
| 30***01 | Undercarriage Ar; -Lh | 1 |
304-1890 Roller Gp-Track -Triple Flange
| 30***90 | Roller Group-Track; -Triple Flange | 1 |
304-1888 Roller Gp-Track
| 30***88 | Roller Group-Track | 1 |
304-1898 Track Adjuster & Recoil Gp
| 06***43 | Ring-Snap | 1 |
| 21***55 | Pin As | 1 |
| 21***43 | Bushing | 1 |
356-2462 Undercarriage Ar -Lh
| 25***97 | Bearing-Sleeve | 1 |
| 25***42 | Bearing-Sleeve | 1 |
| 27***70 | Kit-Seal; (Hydraulic Cylinder) | 1 |
304-1901 Undercarriage Ar -Lh
| 23***66 | Pin As | 6 |
| 23***99 | Spacer; (25.4x28.4x13-mm Thk) | 12 |
| 24***70 | Spacer; (8.2x13x6-mm Thk) | 6 |
304-1902 Undercarriage Ar -Rh
| 26***41 | Kit-Seal | 1 |
| 30***02 | Undercarriage Ar; -Rh | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
356-2465 Undercarriage Ar -Rh
| 35***65 | Undercarriage Ar; -Rh | 1 |
304-1919 Undercarriage Ar
| 25***97 | Bearing-Sleeve | 1 |
| 28***91 | Kit-Seal | 1 |
| 2K***21 | Locknut (5/8-18 Thd) | 1 |
Work Tools
216-8756 Arm Gp-Material Handling
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 21***56 | Arm Group-Material Handling | 1 |
231-5277 Blade Ar -Angling
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 23***77 | Blade Ar; -Angling | 1 |
177-1989 Blade Ar -Angling
| 15***37 | Edge | 1 |
| 17***89 | Blade Ar; -Angling | 1 |
| 32***34 | Guard As; (60-In) | 1 |
231-5275 Blade Ar -Angling
| 15***59 | Edge | 1 |
| 23***75 | Blade Ar; -Angling | 1 |
| 32***44 | Guard As; (66-In) | 1 |
177-1990 Blade Ar -Angling
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 17***90 | Blade Ar; -Angling | 1 |
177-1987 Blade As-Angling
| 15***77 | Edge | 1 |
| 17***87 | Blade As-Angling | 1 |
| 32***54 | Guard As; (72-In) | 1 |
230-4596 Blade As-Angling
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 23***96 | Blade As-Angling | 1 |
222-7412 Blade As-Angling
| 19***16 | Edge | 1 |
| 22***12 | Blade As-Angling | 1 |
| 32***64 | Guard As; (78-In) | 1 |
177-1988 Blade As-Angling
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 17***88 | Blade As-Angling | 1 |
231-5276 Blade Gp-Angling
| 13***84 | Edge Group-Cutting | 1 |
| 23***76 | Blade Group-Angling | 1 |
| 27***37 | Bucket As-Dirt | 1 |
222-7724 Blade Gp-Angling
| 13***83 | Edge Group-Cutting | 1 |
| 22***24 | Blade Group-Angling | 1 |
| 27***34 | Bucket As-Dirt | 1 |
177-1982 Blade Gp-Angling
| 13***87 | Edge Group-Cutting | 1 |
| 17***82 | Blade Group-Angling | 1 |
| 26***84 | Bucket Group-Dirt | 1 |
177-1981 Blade Gp-Angling
| 17***81 | Blade Group-Angling | 1 |
| 29***44 | Edge | 1 |
| 32***74 | Guard As; (84-In) | 1 |
325-7059 Blade Gp-Multipurpose Bucket
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***87 | Lines Group-Grapple; -Industrial | 1 |
| 21***28 | Bucket Group-Grapple | 1 |
159-5347 Blade Gp-Multipurpose Bucket
| 13***84 | Edge Group-Cutting | 1 |
| 15***47 | Blade Group-Multipurpose Bucket | 1 |
| 27***64 | Bucket As-General Purpose | 1 |
325-7038 Blade Gp-Multipurpose Bucket
| 15***85 | Bucket Group-Grapple; -Industrial | 1 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***87 | Lines Group-Grapple; -Industrial | 1 |
279-5387 Blade Gp-Multipurpose Bucket
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
325-7039 Blade Gp-Multipurpose Bucket
| 15***86 | Bucket Group-Grapple; -Industrial | 1 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***87 | Lines Group-Grapple; -Industrial | 1 |
279-5405 Blade Gp-Multipurpose Bucket
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 9 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
325-7048 Blade Gp-Multipurpose Bucket
| 13***84 | Edge Group-Cutting | 1 |
| 15***23 | Bucket Ar-Grapple | 1 |
| 32***48 | Blade Group-Multipurpose Bucket | 1 |
279-5406 Blade Gp-Multipurpose Bucket
| 19***24 | Edge Group-Cutting | 1 |
| 27***06 | Blade Group-Multipurpose Bucket | 1 |
| 29***70 | Bucket As-General Purpose; -High Capacity | 1 |
293-0142 Blade Gp-Multipurpose Bucket
| 15***84 | Bucket Group-Grapple; -Industrial | 1 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***87 | Lines Group-Grapple; -Industrial | 1 |
279-5395 Blade Gp-Multipurpose Bucket
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
154-5080 Blade Gp-Multipurpose Bucket
| 13***85 | Edge Group-Cutting | 1 |
| 15***80 | Blade Group-Multipurpose Bucket | 1 |
| 27***40 | Bucket As-Dirt | 1 |
279-5388 Blade Gp-Multipurpose Bucket
| 13***86 | Edge Group-Cutting | 1 |
| 27***72 | Bucket As-General Purpose | 1 |
| 27***88 | Blade Group-Multipurpose Bucket | 1 |
325-7068 Blade Gp-Multipurpose Bucket
| 13***87 | Edge Group-Cutting | 1 |
| 21***29 | Bucket Ar-Grapple | 1 |
| 32***68 | Blade Group-Multipurpose Bucket | 1 |
279-5385 Blade Gp-Multipurpose Bucket
| 13***85 | Edge Group-Cutting | 1 |
| 27***68 | Bucket As-General Purpose | 1 |
| 27***85 | Blade Group-Multipurpose Bucket | 1 |
325-7079 Blade Gp-Multipurpose Bucket
| 28***48 | Mounting Group-Cylinder; -Grapple Bucket | 1 |
| 28***51 | Plate & Film Group | 1 |
| 28***78 | Bucket Group-Grapple | 1 |
279-5384 Blade Gp-Multipurpose Bucket
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
325-7049 Blade Gp-Multipurpose Bucket
| 13***85 | Edge Group-Cutting | 1 |
| 15***24 | Bucket Ar-Grapple | 1 |
| 32***49 | Blade Group-Multipurpose Bucket | 1 |
325-7069 Blade Gp-Multipurpose Bucket
| 28***00 | Bucket Ar-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
| 32***69 | Blade Group-Multipurpose Bucket | 1 |
159-5345 Blade Gp-Multipurpose Bucket
| 13***86 | Edge Group-Cutting | 1 |
| 15***45 | Blade Group-Multipurpose Bucket | 1 |
| 28***89 | Bucket As-Dirt | 1 |
325-7078 Blade Gp-Multipurpose Bucket
| 28***01 | Bucket Ar-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
| 32***78 | Blade Group-Multipurpose Bucket | 1 |
325-7058 Blade Gp-Multipurpose Bucket
| 13***86 | Edge Group-Cutting | 1 |
| 15***25 | Bucket Ar-Grapple; -Industrial | 1 |
| 32***58 | Blade Group-Multipurpose Bucket | 1 |
279-5396 Blade Gp-Multipurpose Bucket
| 13***87 | Edge Group-Cutting | 1 |
| 27***76 | Bucket As-General Purpose | 1 |
| 27***96 | Blade Group-Multipurpose Bucket | 1 |
268-4083 Bucket Ar-Dirt
| 26***83 | Bucket Ar-Dirt | 1 |
| 28***44 | Bucket Group-Grapple | 1 |
| 28***48 | Mounting Group-Cylinder; -Grapple Bucket | 1 |
279-5441 Bucket Ar-Dirt
| 19***24 | Edge Group-Cutting | 1 |
| 27***29 | Bucket As-Light Material | 1 |
| 27***41 | Bucket Ar-Dirt | 1 |
279-5435 Bucket Ar-Dirt
| 13***86 | Edge Group-Cutting | 1 |
| 27***21 | Bucket As-Light Material | 1 |
| 27***35 | Bucket Ar-Dirt | 1 |
285-6090 Bucket Ar-Dirt
| 28***90 | Bucket Ar-Dirt, Turbocharger | 1 |
| 29***23 | Bucket As-Light Material, Wheel Disc | 1 |
| 29***80 | Edge Group-Cutting | 1 |
279-5438 Bucket Ar-Dirt
| 13***87 | Edge Group-Cutting | 1 |
| 27***24 | Bucket As-Light Material | 1 |
| 27***38 | Bucket Ar-Dirt | 1 |
279-5369 Bucket Ar-General Purpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 15***04 | Bucket Ar-Multipurpose | 1 |
296-8192 Bucket Ar-General Purpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
279-5370 Bucket Ar-General Purpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
279-5378 Bucket Ar-General Purpose
| 13***85 | Edge Group-Cutting | 1 |
| 27***78 | Bucket Ar-General Purpose | 1 |
| 27***90 | Bucket Ar-Multipurpose | 1 |
279-5366 Bucket Ar-General Purpose
| 15***09 | Bucket Group-Multipurpose | 1 |
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***52 | Lines Group-Bucket; -Multipurpose | 1 |
279-5373 Bucket Ar-General Purpose
| 13***84 | Edge Group-Cutting | 1 |
| 27***73 | Bucket Ar-General Purpose | 1 |
| 27***82 | Bucket Ar-Multipurpose | 1 |
279-5374 Bucket Ar-General Purpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 16***36 | Cover Group-Lines | 1 |
| 27***69 | Cylinder Group-Hydraulic | 2 |
279-5365 Bucket Ar-General Purpose
| 15***05 | Bucket Group-Multipurpose | 1 |
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***19 | Lines Group-Bucket; -Multipurpose | 1 |
279-5377 Bucket Ar-General Purpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 16***36 | Cover Group-Lines | 1 |
| 27***69 | Cylinder Group-Hydraulic | 2 |
158-6095 Bucket Ar-Grapple
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***95 | Bucket Ar-Grapple; -Industrial | 1 |
| 16***36 | Cover Group-Lines | 1 |
157-7225 Bucket Ar-Grapple -Industrial
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 15***25 | Bucket Ar-Grapple; -Industrial | 1 |
217-6229 Bucket Ar-Grapple
| 15***11 | Mounting Group-Cylinder | 1 |
| 16***36 | Cover Group-Lines | 1 |
| 21***29 | Bucket Ar-Grapple | 1 |
157-7227 Bucket Ar-Grapple
| 13***87 | Edge Group-Cutting | 1 |
| 15***27 | Bucket Ar-Grapple; -Industrial | 1 |
| 27***03 | Bucket Ar-Multipurpose | 1 |
286-9301 Bucket Ar-Grapple
| 13***84 | Edge Group-Cutting | 1 |
| 28***01 | Bucket Ar-Grapple | 1 |
| 32***36 | Bucket Ar-Multipurpose, Protective Cover | 1 |
286-9300 Bucket Ar-Grapple
| 15***11 | Mounting Group-Cylinder | 1 |
| 16***36 | Cover Group-Lines | 1 |
| 27***69 | Cylinder Group-Hydraulic | 2 |
285-6111 Bucket Ar-Grapple
| 19***24 | Edge Group-Cutting | 1 |
| 28***11 | Bucket Ar-Grapple | 1 |
| 29***39 | Engine; - Assembly, Bucket Ar-Multipurpose | 1 |
157-7224 Bucket Ar-Grapple
| 13***86 | Edge Group-Cutting | 1 |
| 15***24 | Bucket Ar-Grapple | 1 |
| 27***98 | Bucket Ar-Multipurpose | 1 |
157-7226 Bucket Ar-Grapple
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 9 |
| 15***26 | Bucket Ar-Grapple; -Industrial | 1 |
157-7223 Bucket Ar-Grapple
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***23 | Bucket Ar-Grapple | 1 |
| 16***36 | Cover Group-Lines | 1 |
285-6112 Bucket Ar-Grapple
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
217-6230 Bucket Ar-Grapple
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 9 |
| 21***30 | Bucket Ar-Grapple | 1 |
279-5430 Bucket Ar-Light Material
| 13***85 | Edge Group-Cutting | 1 |
| 27***30 | Bucket Ar-Light Material | 1 |
| 32***46 | Bucket Ar-Multipurpose | 1 |
296-7597 Bucket Ar-Light Material
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
279-5425 Bucket Ar-Light Material
| 15***11 | Mounting Group-Cylinder | 1 |
| 16***36 | Cover Group-Lines | 1 |
| 27***69 | Cylinder Group-Hydraulic | 2 |
279-5420 Bucket Ar-Light Material
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
279-5398 Bucket Ar-Multipurpose
| 13***85 | Edge Group-Cutting | 1 |
| 27***98 | Bucket Ar-Multipurpose | 1 |
| 28***99 | Bucket Group-Utility | 1 |
293-0139 Bucket Ar-Multipurpose
| 14***37 | Edge | 1 |
| 29***39 | Engine; - Assembly, Bucket Ar-Multipurpose | 1 |
325-7040 Bucket Ar-Multipurpose
| 14***35 | Edge | 1 |
| 32***40 | Bucket Ar-Multipurpose | 1 |
325-7050 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***39 | Bucket As-Dirt | 1 |
279-5381 Bucket Ar-Multipurpose
| 13***87 | Edge Group-Cutting | 1 |
| 27***81 | Bucket Ar-Multipurpose | 1 |
| 32***66 | Bucket Ar-Multipurpose | 1 |
154-5046 Bucket Ar-Multipurpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 9 |
| 15***46 | Bucket Ar-Multipurpose | 1 |
296-8055 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 18***16 | Bucket As-Dirt | 1 |
325-7055 Bucket Ar-Multipurpose
| 14***37 | Edge | 1 |
| 32***55 | Bucket Ar-Multipurpose | 1 |
279-5382 Bucket Ar-Multipurpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 9 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
325-7075 Bucket Ar-Multipurpose
| 14***37 | Edge | 1 |
| 32***75 | Bucket Ar-Multipurpose | 1 |
279-5391 Bucket Ar-Multipurpose
| 19***24 | Edge Group-Cutting | 1 |
| 27***91 | Bucket Ar-Multipurpose | 1 |
| 32***76 | Bucket Ar-Multipurpose | 1 |
279-5400 Bucket Ar-Multipurpose
| 14***36 | Edge | 1 |
| 27***00 | Bucket Ar-Multipurpose | 1 |
154-5004 Bucket Ar-Multipurpose
| 15***04 | Bucket Ar-Multipurpose | 1 |
| 15***11 | Mounting Group-Cylinder | 1 |
| 16***36 | Cover Group-Lines | 1 |
279-5399 Bucket Ar-Multipurpose
| 13***86 | Edge Group-Cutting | 1 |
| 27***99 | Bucket Ar-Multipurpose | 1 |
| 28***02 | Bucket Group-Utility | 1 |
325-7056 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 28***88 | Bucket As-Dirt | 1 |
325-7076 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***71 | Bucket As-General Purpose | 1 |
154-5010 Bucket Ar-Multipurpose
| 13***86 | Edge Group-Cutting | 1 |
| 15***10 | Bucket Ar-Multipurpose | 1 |
| 32***56 | Bucket Ar-Multipurpose | 1 |
325-7070 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***67 | Bucket As-General Purpose | 1 |
279-5403 Bucket Ar-Multipurpose
| 14***04 | Bucket As-Dirt | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
325-7066 Bucket Ar-Multipurpose
| 14***36 | Edge | 1 |
| 32***66 | Bucket Ar-Multipurpose | 1 |
279-5401 Bucket Ar-Multipurpose
| 14***35 | Edge | 1 |
| 27***01 | Bucket Ar-Multipurpose | 1 |
325-7065 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***63 | Bucket As-General Purpose | 1 |
279-5402 Bucket Ar-Multipurpose
| 15***27 | Bucket As-Dirt | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
325-7046 Bucket Ar-Multipurpose
| 14***36 | Edge | 1 |
| 32***46 | Bucket Ar-Multipurpose | 1 |
325-7080 Bucket Ar-Multipurpose
| 19***22 | Edge | 1 |
| 32***80 | Bucket Ar-Multipurpose | 1 |
296-8057 Bucket Ar-Multipurpose
| 19***22 | Edge | 1 |
| 29***57 | Bucket Ar-Multipurpose | 1 |
279-5380 Bucket Ar-Multipurpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 16***36 | Cover Group-Lines | 1 |
| 27***69 | Cylinder Group-Hydraulic | 2 |
325-7045 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***36 | Bucket As-Dirt | 1 |
325-7036 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***33 | Bucket As-Dirt | 1 |
279-5392 Bucket Ar-Multipurpose
| 13***84 | Edge Group-Cutting | 1 |
| 27***92 | Bucket Ar-Multipurpose | 1 |
| 28***96 | Bucket Group-Utility | 1 |
325-7035 Bucket Ar-Multipurpose
| 14***34 | Edge | 1 |
| 32***35 | Bucket Ar-Multipurpose | 1 |
279-5390 Bucket Ar-Multipurpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 16***36 | Cover Group-Lines | 1 |
| 27***69 | Cylinder Group-Hydraulic | 2 |
325-7060 Bucket Ar-Multipurpose
| 14***35 | Edge | 1 |
| 32***60 | Bucket Ar-Multipurpose | 1 |
285-6095 Bucket Ar-Utility
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***75 | Bucket As-General Purpose | 1 |
285-6101 Bucket Ar-Utility
| 22***32 | Edge | 1 |
| 28***01 | Bucket Ar-Utility | 1 |
285-6100 Bucket Ar-Utility
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 28***00 | Bucket Ar-Utility | 1 |
279-5434 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***22 | Bucket As-Light Material | 1 |
279-5433 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 21***26 | Bucket As-Grapple | 1 |
165-6156 Bucket As-Dirt
| 14***37 | Edge | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
| 16***56 | Bucket As-Dirt | 1 |
188-2716 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***88 | Bucket As-Grapple | 1 |
| 16***89 | Tack-Fastener | 4 |
279-5439 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***23 | Bucket As-Light Material | 1 |
152-0227 Bucket As-Dirt
| 14***36 | Edge | 1 |
| 15***27 | Bucket As-Dirt | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
279-5436 Bucket As-Dirt
| 14***37 | Edge | 1 |
| 27***36 | Bucket As-Dirt | 1 |
268-4089 Bucket As-Dirt
| 16***30 | Plate-Identification; (Cat) | 2 |
| 19***22 | Edge | 1 |
| 26***89 | Bucket As-Dirt | 1 |
285-6088 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***28 | Bucket As-Light Material | 1 |
279-5440 Bucket As-Dirt
| 22***82 | Edge | 1 |
| 27***40 | Bucket As-Dirt | 1 |
165-6157 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***87 | Bucket As-Grapple; -Industrial | 1 |
| 16***57 | Bucket As-Dirt | 1 |
188-3526 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***89 | Bucket As-Grapple | 1 |
| 16***89 | Tack-Fastener | 4 |
285-6089 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 28***89 | Bucket As-Dirt | 1 |
141-6704 Bucket As-Dirt
| 14***04 | Bucket As-Dirt | 1 |
| 14***35 | Edge | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
279-5437 Bucket As-Dirt
| 19***22 | Edge | 1 |
| 27***37 | Bucket As-Dirt | 1 |
279-5364 Bucket As-General Purpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***32 | Bucket As-Utility | 1 |
| 16***89 | Tack-Fastener | 4 |
279-5363 Bucket As-General Purpose
| 27***63 | Bucket As-General Purpose | 1 |
| 29***57 | Edge | 1 |
279-5372 Bucket As-General Purpose
| 14***35 | Edge | 1 |
| 27***72 | Bucket As-General Purpose | 1 |
279-5367 Bucket As-General Purpose
| 11***83 | Boss; (M10x1.5-Thd) | 4 |
| 14***36 | Edge | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
279-5368 Bucket As-General Purpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***37 | Bucket As-Utility | 1 |
| 16***89 | Tack-Fastener | 4 |
279-5371 Bucket As-General Purpose
| 14***35 | Edge | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
| 27***71 | Bucket As-General Purpose | 1 |
279-5376 Bucket As-General Purpose
| 14***37 | Edge | 1 |
| 27***76 | Bucket As-General Purpose | 1 |
279-5375 Bucket As-General Purpose
| 14***36 | Edge | 1 |
| 27***75 | Bucket As-General Purpose | 1 |
292-9270 Bucket As-General Purpose -High Capacity
| 13***84 | Edge Group-Cutting | 1 |
| 16***56 | Bucket As-Dirt | 1 |
| 29***70 | Bucket As-General Purpose; -High Capacity | 1 |
292-9271 Bucket As-General Purpose
| 13***85 | Edge Group-Cutting | 1 |
| 16***57 | Bucket As-Dirt | 1 |
| 29***71 | Bucket As-General Purpose, Cap | 1 |
169-8943 Bucket As-Grapple
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***43 | Bucket As-Grapple | 2 |
156-0888 Bucket As-Grapple
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***88 | Bucket As-Grapple | 1 |
| 16***89 | Tack-Fastener | 4 |
217-6226 Bucket As-Grapple
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 21***26 | Bucket As-Grapple | 1 |
217-6227 Bucket As-Grapple
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
169-8941 Bucket As-Grapple
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***41 | Bucket As-Grapple; -Industrial | 2 |
169-8942 Bucket As-Grapple
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***42 | Bucket As-Grapple; -Industrial | 2 |
156-0887 Bucket As-Grapple
| 13***86 | Edge Group-Cutting | 1 |
| 15***87 | Bucket As-Grapple; -Industrial | 1 |
| 18***26 | Bucket As-Dirt | 1 |
156-0889 Bucket As-Grapple
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 9 |
| 15***89 | Bucket As-Grapple | 1 |
279-5429 Bucket As-Light Material
| 15***12 | Pin | 2 |
| 15***53 | Clam As-Multipurpose Bucket | 1 |
| 27***88 | Blade Group-Multipurpose Bucket | 1 |
279-5424 Bucket As-Light Material
| 15***12 | Pin | 2 |
| 15***70 | Clam As-Multipurpose Bucket | 1 |
| 15***47 | Blade Group-Multipurpose Bucket | 1 |
279-5421 Bucket As-Light Material
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 27***21 | Bucket As-Light Material | 1 |
292-9223 Bucket As-Light Material
| 15***12 | Pin | 2 |
| 15***70 | Clam As-Multipurpose Bucket | 1 |
| 27***96 | Blade Group-Multipurpose Bucket | 1 |
292-9224 Bucket As-Light Material
| 15***12 | Pin | 2 |
| 19***08 | Clam As-Multipurpose Bucket | 1 |
| 27***05 | Blade Group-Multipurpose Bucket | 1 |
279-5423 Bucket As-Light Material
| 14***32 | Clam As-Multipurpose Bucket | 1 |
| 15***12 | Pin | 2 |
| 15***45 | Blade Group-Multipurpose Bucket | 1 |
279-5428 Bucket As-Light Material
| 14***32 | Clam As-Multipurpose Bucket | 1 |
| 15***12 | Pin | 2 |
| 27***84 | Blade Group-Multipurpose Bucket | 1 |
279-5422 Bucket As-Light Material
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 27***22 | Bucket As-Light Material | 1 |
285-6103 Bucket As-Utility
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 28***97 | Bucket As-Utility | 1 |
165-8746 Bucket As-Utility
| 15***12 | Pin | 2 |
| 16***46 | Bucket As-Utility | 1 |
| 29***42 | Blade Group-Multipurpose Bucket | 1 |
285-6097 Bucket As-Utility
| 15***12 | Pin | 2 |
| 19***08 | Clam As-Multipurpose Bucket | 1 |
| 28***97 | Bucket As-Utility | 1 |
165-8835 Bucket As-Utility
| 15***12 | Pin | 2 |
| 15***53 | Clam As-Multipurpose Bucket | 1 |
| 16***35 | Bucket As-Utility | 1 |
285-6098 Bucket As-Utility
| 15***12 | Pin | 2 |
| 15***38 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
| 28***98 | Bucket As-Utility, Fuel Injection Pump; - Assembly | 1 |
165-8837 Bucket As-Utility
| 15***12 | Pin | 2 |
| 15***70 | Clam As-Multipurpose Bucket | 1 |
| 16***37 | Bucket As-Utility | 1 |
165-8832 Bucket As-Utility
| 14***32 | Clam As-Multipurpose Bucket | 1 |
| 15***12 | Pin | 2 |
| 16***32 | Bucket As-Utility | 1 |
152-0232 Bucket Gp-Dirt
| 15***32 | Bucket Group-Dirt | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
188-2719 Bucket Gp-Dirt
| 18***19 | Bucket Group-Dirt | 1 |
| 19***43 | Fork Group-Pallet | 2 |
| 26***81 | Carriage Group-Fork | 1 |
268-4084 Bucket Gp-Dirt
| 19***42 | Fork Group-Pallet | 2 |
| 26***81 | Carriage Group-Fork | 1 |
| 26***84 | Bucket Group-Dirt | 1 |
152-0231 Bucket Gp-Dirt
| 15***31 | Bucket Group-Dirt | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
296-8191 Bucket Gp-General Purpose
| 19***45 | Fork Group-Pallet | 2 |
| 26***81 | Carriage Group-Fork | 1 |
| 29***91 | Bucket Group-General Purpose | 1 |
279-5359 Bucket Gp-Grapple -Industrial
| 15***35 | Plate-Instruction; (Load Capacity) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 25***95 | Step As | 1 |
156-0886 Bucket Gp-Grapple
| 15***86 | Bucket Group-Grapple; -Industrial | 1 |
| 19***42 | Fork Group-Pallet | 2 |
| 35***71 | Carriage Group-Fork | 1 |
286-9278 Bucket Gp-Grapple
| 15***35 | Plate-Instruction; (Load Capacity) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 25***95 | Step As | 1 |
286-9244 Bucket Gp-Grapple
| 26***81 | Carriage Group-Fork | 6 |
| 28***44 | Bucket Group-Grapple | 1 |
217-6228 Bucket Gp-Grapple
| 19***45 | Fork Group-Pallet | 2 |
| 21***28 | Bucket Group-Grapple | 1 |
| 35***71 | Carriage Group-Fork | 1 |
156-0884 Bucket Gp-Grapple
| 15***84 | Bucket Group-Grapple; -Industrial | 1 |
| 35***71 | Carriage Group-Fork | 6 |
156-0885 Bucket Gp-Grapple
| 15***85 | Bucket Group-Grapple; -Industrial | 1 |
| 19***43 | Fork Group-Pallet | 2 |
| 35***71 | Carriage Group-Fork | 1 |
279-5389 Bucket Gp-Multipurpose
| 14***05 | Bearing-Sleeve | 4 |
| 15***38 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
| 16***30 | Plate-Identification; (Cat) | 2 |
279-5404 Bucket Gp-Multipurpose
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
279-5383 Bucket Gp-Multipurpose
| 14***05 | Bearing-Sleeve | 4 |
| 14***37 | Edge | 1 |
| 15***38 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
154-5009 Bucket Gp-Multipurpose
| 14***05 | Bearing-Sleeve | 4 |
| 14***36 | Edge | 1 |
| 15***09 | Bucket Group-Multipurpose | 1 |
325-7077 Bucket Gp-Multipurpose
| 19***40 | Cylinder Group-Hydraulic; -Coupler | 1 |
| 19***42 | Pin | 1 |
| 21***57 | Link Group-Coupler | 1 |
325-7057 Bucket Gp-Multipurpose
| 20***85 | Pin | 2 |
| 21***62 | Cylinder & Link Group-Coupler; -Lh | 1 |
| 21***63 | Cylinder & Link Group-Coupler; -Rh | 1 |
325-7067 Bucket Gp-Multipurpose
| 16***28 | Plate | 1 |
| 32***67 | Bucket Group-Multipurpose | 1 |
| 5C***53 | Bolt (M6x1.00x16mm); (M6x1x16mm Thk) | 5 |
279-5397 Bucket Gp-Multipurpose
| 14***05 | Bearing-Sleeve | 4 |
| 16***30 | Plate-Identification; (Cat) | 2 |
| 22***32 | Edge | 1 |
325-7047 Bucket Gp-Multipurpose
| 13***79 | Washer; (11x32x3-mm Thk) | 2 |
| 13***51 | Spacer; (11x19x6-mm Thk) | 2 |
| 15***97 | Spring | 2 |
154-5005 Bucket Gp-Multipurpose
| 14***05 | Bearing-Sleeve | 4 |
| 14***35 | Edge | 1 |
| 15***05 | Bucket Group-Multipurpose | 1 |
293-0141 Bucket Gp-Multipurpose
| 25***00 | Coupler Group-Quick | 1 |
| 28***90 | Fitting Group-Hydraulic; -Manual | 1 |
| 29***41 | Bucket Group-Multipurpose | 1 |
325-7037 Bucket Gp-Multipurpose
| 25***01 | Coupler Group-Quick | 1 |
| 25***24 | Lines Group-Coupler | 1 |
| 25***90 | Wiring Group-Quick Coupler | 1 |
285-6099 Bucket Gp-Utility
| 14***14 | Edge-Cutting | 1 |
| 28***99 | Bucket Group-Utility | 1 |
| 3F***08 | Bolt-Plow; (5/8-11x2.25-In) | 10 |
285-6096 Bucket Gp-Utility
| 19***40 | Cylinder Group-Hydraulic; -Coupler | 1 |
| 19***42 | Pin | 1 |
| 21***57 | Link Group-Coupler | 1 |
285-6102 Bucket Gp-Utility
| 14***88 | Edge-Cutting | 1 |
| 28***02 | Bucket Group-Utility | 1 |
| 3F***08 | Bolt-Plow; (5/8-11x2.25-In) | 13 |
293-9427 Carriage & Fork Ar
| 13***93 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 6 |
| 29***27 | Carriage & Fork Ar | 1 |
353-1696 Carriage & Fork Ar
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 7 |
| 19***24 | Edge-Cutting | 1 |
| 35***96 | Carriage & Fork Ar | 1 |
353-1697 Carriage & Fork Ar
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 11 |
| 19***24 | Edge-Cutting | 1 |
| 35***97 | Carriage & Fork Ar | 1 |
353-1693 Carriage & Fork Ar
| 13***96 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 11 |
| 35***93 | Carriage & Fork Ar | 1 |
293-9428 Carriage & Fork Ar
| 13***94 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 8 |
| 29***28 | Carriage & Fork Ar | 1 |
293-9429 Carriage & Fork Ar
| 13***95 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 8 |
| 29***29 | Carriage & Fork Ar | 1 |
353-1694 Carriage & Fork Ar
| 13***97 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 11 |
| 35***94 | Carriage & Fork Ar | 1 |
293-9426 Carriage Gp-Fork
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***14 | Fork Group-Grapple; -Industrial | 9 |
| 27***75 | Cylinder Group-Grapple; -Industrial | 2 |
351-9371 Carriage Gp-Fork
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***14 | Fork Group-Grapple; -Industrial | 2 |
| 27***75 | Cylinder Group-Grapple; -Industrial | 2 |
261-6681 Carriage Gp-Fork
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 13 |
| 26***81 | Carriage Group-Fork | 1 |
| 29***02 | Edge-Cutting | 1 |
154-5070 Clam As-Multipurpose Bucket
| 15***70 | Clam As-Multipurpose Bucket | 1 |
| 16***54 | Tine | 1 |
| 3E***70 | Pin; (Spring) | 1 |
149-4232 Clam As-Multipurpose Bucket
| 14***32 | Clam As-Multipurpose Bucket | 1 |
| 28***05 | Fork Group-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
154-5053 Clam As-Multipurpose Bucket
| 15***53 | Clam As-Multipurpose Bucket | 1 |
| 28***10 | Fork Group-Grapple | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
293-0148 Clam As-Multipurpose Bucket
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 9 |
| 29***48 | Clam As-Multipurpose Bucket | 1 |
199-8308 Clam As-Multipurpose Bucket
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
296-0582 Conversion Gp-Work Tool -Kit, High Flow
| 22***29 | Positioner Group-Fork | 1 |
| 29***82 | Conversion Group-Work Tool; -Kit, High Flow | 1 |
258-2790 Coupler Ar-Quick
| 22***29 | Positioner Group-Fork | 1 |
| 25***90 | Coupler Ar-Quick | 1 |
258-3791 Coupler Ar-Quick
| 22***29 | Positioner Group-Fork | 1 |
| 25***91 | Coupler Ar-Quick | 1 |
258-2500 Coupler Gp-Quick
| 19***43 | Fork Group-Pallet | 12 |
| 22***29 | Positioner Group-Fork | 1 |
| 25***00 | Coupler Group-Quick | 1 |
258-2501 Coupler Gp-Quick
| 19***42 | Fork Group-Pallet | 12 |
| 22***29 | Positioner Group-Fork | 1 |
| 25***01 | Coupler Group-Quick | 1 |
162-5236 Cover Gp-Lines
| 16***36 | Cover Group-Lines | 1 |
| 19***45 | Fork Group-Pallet | 12 |
| 22***29 | Positioner Group-Fork | 1 |
215-3962 Cylinder & Link Gp-Coupler -Lh
| 16***41 | Tine | 1 |
| 21***62 | Cylinder & Link Group-Coupler; -Lh | 1 |
| 9R***59 | Clip | 1 |
215-3963 Cylinder & Link Gp-Coupler -Rh
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 7 |
| 16***38 | Fork Group-Utility | 1 |
222-7545 Edge Gp-Bit & Cutting
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 9 |
| 16***39 | Fork Group-Utility | 1 |
222-7546 Edge Gp-Bit & Cutting
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***44 | Fork As; (Utility) | 1 |
135-9383 Edge Gp-Cutting
| 13***83 | Edge Group-Cutting | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
296-7680 Edge Gp-Cutting
| 19***37 | Plate | 1 |
| 19***45 | Spring | 1 |
| 19***54 | Pin-Spring | 2 |
195-7124 Edge Gp-Cutting
| 15***11 | Pin | 4 |
| 15***35 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
| 16***43 | Arm As | 1 |
135-9386 Edge Gp-Cutting
| 13***86 | Edge Group-Cutting | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
135-9387 Edge Gp-Cutting
| 13***87 | Edge Group-Cutting | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
149-5741 Edge Gp-Cutting
| 14***41 | Edge Group-Cutting | 1 |
| 16***31 | Mounting Group-Cylinder; -Utility | 1 |
| 16***40 | Grapple Group-Utility | 1 |
135-9384 Edge Gp-Cutting
| 13***84 | Edge Group-Cutting | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 7 |
135-9385 Edge Gp-Cutting
| 13***85 | Edge Group-Cutting | 1 |
| 17***14 | Pin As | 1 |
| 17***55 | Shim; (1-mm Thk) | 1 |
279-5360 Fork Ar-Grapple -Industrial
| 03***57 | Washer; (13x26x6-mm Thk) | 2 |
| 17***53 | Plate | 2 |
| 18***97 | Plate Group-Roading; -Lh | 1 |
285-6114 Fork Ar-Grapple -Utility
| 03***57 | Washer; (13x26x6-mm Thk) | 4 |
| 17***14 | Film-Stripe; (Reflective, Red, White) | 1 |
| 17***15 | Film; (Reflective)(Warning) | 1 |
279-5350 Fork Ar-Grapple -Industrial
| 19***37 | Plate | 1 |
| 19***45 | Spring | 1 |
| 19***54 | Pin-Spring | 2 |
285-6115 Fork Ar-Grapple -Utility
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 06***51 | Clamp | 4 |
| 10***59 | Spacer; (9x20x39.2-mm Thk) | 1 |
164-9614 Fork Gp-Grapple
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 06***51 | Clamp | 4 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 4 |
285-6110 Fork Gp-Grapple
| 17***47 | Pin | 1 |
| 28***10 | Fork Group-Grapple | 1 |
| 9R***01 | Pin-Cotter | 1 |
279-5351 Fork Gp-Grapple -Industrial
| 19***45 | Spring | 1 |
| 27***51 | Fork Group-Grapple; -Industrial | 1 |
| 30***68 | Pin-Spring | 1 |
243-0001 Fork Gp-Pallet -Kit
| 17***14 | Film-Stripe; (Reflective, Red, White) | 1 |
| 17***15 | Film; (Reflective)(Warning) | 1 |
| 17***51 | Plate As; (Rh) | 1 |
195-8545 Fork Gp-Pallet
| 17***14 | Film-Stripe; (Reflective, Red, White) | 1 |
| 17***15 | Film; (Reflective)(Warning) | 1 |
| 17***50 | Plate As; (Lh) | 1 |
243-0002 Fork Gp-Pallet -Kit
| 17***41 | Spring | 4 |
| 17***73 | Plate As | 1 |
| 24***02 | Fork Group-Pallet; -Kit | 1 |
195-6943 Fork Gp-Pallet
| 16***60 | Pin-Spring | 1 |
| 19***42 | Pin | 1 |
| 19***43 | Fork Group-Pallet | 1 |
243-0003 Fork Gp-Pallet -Kit
| 18***86 | Step As | 1 |
| 24***03 | Fork Group-Pallet; -Kit | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
195-6942 Fork Gp-Pallet
| 16***60 | Pin-Spring | 1 |
| 19***42 | Pin | 1 |
| 19***42 | Fork Group-Pallet | 1 |
165-8732 Fork Gp-Utility
| 16***32 | Fork Group-Utility | 1 |
| 2S***08 | Washer-Retaining; (0.531x3.25x0.438-In Thk) | 2 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 1 |
165-8736 Fork Gp-Utility
| 11***14 | Screen; (Water Tank) | 1 |
| 11***15 | Gasket | 1 |
| 16***36 | Fork Group-Utility | 1 |
165-8739 Fork Gp-Utility
| 16***39 | Fork Group-Utility | 1 |
285-6105 Fork Gp-Utility
| 28***05 | Fork Group-Utility | 1 |
165-8738 Fork Gp-Utility
| 16***38 | Fork Group-Utility | 1 |
| 25***27 | Screw-Truss Head; (No 12x17.46-mm) | 4 |
| 25***98 | Holder-Cup | 1 |
165-8737 Fork Gp-Utility
| 16***37 | Fork Group-Utility | 1 |
| 19***06 | Cap As; (Water Tank) | 1 |
| 19***07 | Fitting-Drain | 1 |
230-5670 Frame Gp-Blade
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 20***45 | Strap-Cable | 2 |
| 23***70 | Frame Group-Blade | 1 |
279-5352 Frame Gp-Fork -Industrial
| 25***68 | Compressor & Mtg Group-Refrig | 1 |
| 25***46 | Wiring Group-Heater | 1 |
| 25***52 | Duct & Filter Group-Cab Air | 1 |
279-5358 Frame Gp-Fork -Industrial
| 10***74 | Seal-Connector | 3 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
285-6116 Grapple & Cylinder Gp-Utility
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***31 | Switch-Temperature; (Air Conditioner) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
165-8740 Grapple Gp-Utility
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***40 | Grapple Group-Utility | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
258-2538 Handle & Pin Gp-Coupler -Lh
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
| 25***38 | Handle & Pin Group-Coupler; -Lh | 1 |
258-2536 Handle & Pin Gp-Coupler -Rh
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
| 25***36 | Handle & Pin Group-Coupler; -Rh | 1 |
319-9480 Kit-Roading Plate & Mounting -Bucket
| 25***68 | Cover Group-Cab | 1 |
| 25***17 | Spring Group-Gas; -Includes Lift Handle | 1 |
| 25***66 | Installation Group-Radio | 1 |
177-9152 Kit-Roading Plate & Mounting -Bucket
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 25***66 | Installation Group-Radio | 1 |
| 25***90 | Window Group-Cab; -Side | 1 |
346-1833 Kit-Water Tank & Mounting
| 34***33 | Kit-Water Tank & Mounting | 1 |
| 8T***42 | Rod End-Yoke | 1 |
| 8T***44 | Pin As-Spring | 1 |
258-3645 Kit-Water Tank & Mounting
| 25***45 | Kit-Water Tank & Mounting | 1 |
| 25***10 | Window Group-Cab | 1 |
| 25***20 | Liner Group-Cab | 1 |
215-3957 Link Gp-Coupler
| 21***57 | Link Group-Coupler | 1 |
| 27***74 | Cable Group-Control | 1 |
| 29***97 | Handle Group | 1 |
175-4238 Lock Gp-Quick Coupler -Mechanical
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***93 | Lockwasher | 1 |
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
258-2537 Lock Gp-Quick Coupler -Lh
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 2 |
| 10***33 | Kit; (Receptacle) (Includes Receptacle As) | 1 |
| 10***95 | Terminal-Blade; (14-Ga To 18-Ga) | 2 |
258-2535 Lock Gp-Quick Coupler -Rh
| 10***33 | Kit; (Receptacle) (Includes Receptacle As) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***16 | Terminal | 1 |
184-6098 Plate Gp-Roading -Rh
| 18***98 | Plate Group-Roading; -Rh | 1 |
| 26***66 | Control Group-Joystick; -Lh | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
184-6097 Plate Gp-Roading -Lh
| 18***97 | Plate Group-Roading; -Lh | 1 |
| 25***71 | Switch As; (Temperature Control) | 1 |
| 25***72 | Switch As; (Blower Fan Speed) | 1 |
177-1983 Spring Gp-Blade
| 17***83 | Spring Group-Blade | 1 |
| 26***65 | Control Group-Joystick; -Lh, High Flow | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
188-7733 Step Gp-Material Handling Arm
| 18***33 | Step Group-Material Handling Arm | 1 |
| 26***64 | Control Group-Joystick; -Rh | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
173-7407 Stop Gp-Bucket -Utility
| 17***07 | Stop Group-Bucket; -Utility | 1 |
| 26***62 | Control Group-Joystick; -Rh | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
116-2001 Strainer Gp-Water
| 11***01 | Strainer Group-Water | 1 |
| 26***63 | Control Group-Joystick; -Rh, High Flow | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
166-2551 Tank Gp-Water
| 16***51 | Tank Group-Water | 1 |
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 9 |
141-4999 Tooth Gp-Uni
| 14***99 | Tooth Group-Uni | 1 |
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
299C serial number reference
The 299C product identification plate is a riveted metal tag on the machine frame, typically at the rear of the chassis near the tailgate/engine enclosure — separate from the engine's own data plate. Read the last 8 characters of the full 17-character PIN: a 3-letter serial prefix (JSP for the 299C) followed by a 5-character sequence, where late-production sequences may substitute a letter for a digit once the pure-numeric range is used up. Always match the prefix to the model before ordering parts, since the same sequence numbers repeat under different prefixes on other Cat models.
| Prefix | Identifies | Notes |
|---|---|---|
| JSP | 299C Compact Track Loader — full production run, all configurations (Standard Flow and High Flow XPS hydraulics, single-speed and two-speed transmission) | Rubber-tracked, rigid-frame compact track loader with an elevated (high-drive) external positive-drive system, steel-imbedded rubber tracks — not a wheeled skid steer and not the separate torsion-suspension Multi Terrain Loader line. Engine is the Cat C3.4 DIT, a 3.3L 4-cylinder turbocharged diesel rated near 67 kW (90 hp) net (about 70 kW / 94 hp gross). Standard hydraulics flow about 84 L/min (22 gpm) at 230 bar; the High Flow XPS option raises flow to roughly 120-125 L/min (32-33 gpm) at 280 bar. Two-speed travel option covers about 8 km/h (5.0 mph) low range and 13.6 km/h (8.5 mph) high range, under the same prefix. Field-sold units under this prefix show roughly 2009-2015 build dates, ahead of the 299D successor generation — confirm exact model-year cutoffs against the full PIN with a dealer. |
Frequently asked questions
What engine does the Caterpillar 299C use?
The 299C runs a Cat C3.4 DIT — a turbocharged, air-to-air aftercooled, four-cylinder diesel — rated at approximately 67 kW (90 hp) net. It shares its block with the 279C and 289C, which are tuned lower at 61 kW (82 hp).
What is the operating weight of the Caterpillar 299C?
Operating weight runs around 4,867 kg (10,730 lb) in standard configuration. Expect some variation with bucket, counterweight, cab type, and track width chosen at the factory.
What replaced the Caterpillar 299C?
Cat replaced it directly with the 299D, then the 299D2 and 299D3, built around the larger C3.8 engine with electronic controls and, on later units, particulate aftertreatment. Unlike its 279C and 289C siblings, the 299C did not get an interim "C2" update before that D-series changeover.
What 299C owners discuss
What engine powers the 299C and are there any known quirks with it?
The 299C uses Cat's C3.4 DIT, a 3.3 L (201 cu in) four-cylinder turbocharged diesel rated near 67 kW (90 hp) net and 70 kW (94 hp) gross at 2500 rpm. This predates the Tier 4 DPF-equipped engines used in later D-series machines, so a C-series 299C has no particulate filter or active regeneration cycle to manage. The recurring complaint is intermittent power loss, failure to reach full rpm, and a rough, sputtering run that mimics fuel starvation even after the injection pump and injectors look fine. Before condemning those parts, check the mechanical lift/transfer pump built into the high-pressure pump housing - a weak internal spring there can cut fuel delivery below what the injection pump needs. Confirm lift-pump output and clear the fuel filter head passages first.
Why do some 299Cs gradually lose travel speed or suddenly set the park brake while driving?
The hydrostatic drive uses wet multi-disc brakes that only release once charge pressure builds in the circuit, so a drop in charge pressure both slows the machine and can re-engage the park brake mid-travel, throwing a dash warning and forcing a key cycle to reset. Each drive motor also carries its own speed sensor, and a failed sensor, corroded connector, or a sensor reading the wrong rotation direction (seen after aftermarket final-drive swaps) produces the same symptom: normal creep at low speed, then a fault and forced brake engagement once more speed is commanded. Swapping the left and right sensor plugs is the standard way to separate a wiring fault from an actual sensor failure - if the fault follows the plug, it isn't the sensor. Because this affects the park brake, have your dealer verify charge pressure and sensor readings before putting the machine back to work.
What track and undercarriage wear patterns are typical on this machine?
The 299C is a high-drive compact track loader, using the same elevated, external positive-drive layout as Cat's track-type tractors, with steel-embedded rubber tracks and rollers and idlers down each side. Owners commonly describe the undercarriage feeling sloppy or shifting side to side in turns; this usually traces to axle spacer or track-frame bushing wear rather than the track itself, and confirming it means sliding the track frame off for a look. A track that loosens quickly after the tensioner is greased, or that tries to climb off the rear idler, points to the same wear or to a tensioning system that isn't holding. Keep tension checked regularly and the recoil grease tensioner serviced, and watch rollers and idlers for oil weeping or play at the seals.
What electrical or sensor problems come up most often on the 299C?
Drive-motor speed sensors are the most reported sensor issue - symptoms range from tracking that gets erratic as the machine warms up to a flashing amber alert that escalates into a red park-brake indicator. The sensors sit in an exposed spot with little protection from mud and debris, so a dirty sensor tip or connector is a common cause and cleaning it resolves many cases. Separately, some owners report the ignition circuit's small signal wire overheating and blowing the switch fuse on key-on, traced back to a shorted alternator exciter wire rather than a bad switch. An intermittent short on a live circuit is a fire and stall risk, so have your dealer verify and repair the wiring before continuing to run the machine.
Owners mention a design flaw with the hydraulic tank cap - what's the concern?
The 299C's hydraulic tank fill cap sits in a spot that collects dirt around it, and operators note it's easy to introduce contamination just from opening it to check fluid. Since both the drive and implement pumps depend on clean oil, this gets treated as a real threat to pump life rather than a cosmetic complaint. Wipe the cap and surrounding area down before every fluid check, and keep filter change intervals even if the fluid looks clean.
What causes weak or lost bucket lift power, and how do owners chase it down?
Reports describe a machine that used to snap the bucket up quickly and now lifts slowly or weakly, often with no visible leaks, no stored fault codes, and a normal fluid level. With electronics ruled out, the diagnosis moves to the mechanical hydraulic circuit: check pump flow against spec, inspect the lift and tilt control valve for internal wear or a stuck spool, and check the cylinders for internal bypass - a cylinder that drifts down under load or runs noticeably hotter than its mate is the tell. Air trapped in the circuit after any hose or fitting work can also show up as jerky, underpowered boom and bucket motion until the system is bled.
What should I inspect before buying a used 299C?
Start with hours and remaining emissions-related coverage, since these are pre-Tier-4 C-series machines and warranty windows are tied to age as well as hours. Walk the undercarriage for track wear and tension, and check for side-to-side play in the track frame, which points to spacer or bushing wear rather than just track age; look at idlers and rollers for oil seepage at the seals. Cycle the machine through full travel speed in both hydrostatic ranges to confirm the park brake doesn't unexpectedly engage and no drive-motor fault appears on the dash. Run the engine up under load to confirm it holds full rpm without sputtering or losing power, a classic sign of a tired internal fuel transfer pump. Check around the hydraulic tank cap for contamination, and cycle the boom, bucket, and any high-flow auxiliary circuit under load to confirm full lift power with no drift. Have your dealer pull stored fault codes and verify hydraulic charge pressure before you finalize the purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 299C part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.