Caterpillarskid steer loadermulti terrain loader
Caterpillar 297C
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 297C is a rubber-tracked Multi Terrain Loader, not a wheeled skid steer. It runs a Cat C3.4 DIT engine (Cat 3044C DIT), a 4-cylinder turbocharged diesel of 3.3 L (201 cu in) displacement rated at roughly 70 kW (94 hp) gross and 67 kW (90 hp) net at 2500 rpm. Operating weight runs around 4,599 kg (10,139 lb), varying with undercarriage and hydraulic configuration. Cat built the 297C from around 2007 into the early 2010s as the largest member of its C-series Multi Terrain Loader line alongside the smaller 277C and 287C; it had no direct same-numbered predecessor and stood as the biggest-capacity MTL Cat had built at launch. It was offered with vertical-lift loader linkage, single or dual-level suspension undercarriage, and standard or High Flow XPS hydraulics. Caterpillar replaced it with the 297D and higher-output 297D XHP around 2011.
The C-series brought a redesigned undercarriage over the prior B-series machines, adding a dual-level suspension option with oscillating bogie wheels for smoother ride and better bucket load retention, plus factory SOS sampling valves on the engine and hydraulic system as standard. Later in its run Cat added the High Flow XPS hydraulic option, giving the 297C enough flow and pressure to run demanding attachments like cold planers and landscape rakes. The follow-on 297D moved to a sealed, pressurized cab, more power, and electronic self-leveling, which pushed many buyers upmarket but left the 297C as a widely available, lower-cost entry into rubber-track loader capability. In the used and parts market today, the 297C remains in demand because its C3.4 DIT engine and undercarriage layout are well understood by independent shops, parts for its axle group, tracks, rollers, and hydraulic components are still readily sourced, and its known idler/axle wear pattern makes undercarriage and axle parts a steady repeat business even as newer D, D2, and D3 series MTLs dominate new-machine sales.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 297C specifications
Engine
| Engine model | Cat C3.4 DIT, 4-cylinder turbocharged direct-injection diesel |
| Gross power | 94 hp (70.1 kW) at 2,500 rpm |
| Net power (SAE J1349) | 90 hp (67.1-67.2 kW) |
| Displacement | 3.3 L / 201 cu in |
| Bore x stroke | 94 mm x 119.4 mm (3.70 in x 4.70 in) |
| Emissions tier | Not documented on available spec sheets for this exact configuration - verify with your dealer |
Weights
| Operating weight | 4,599-4,640 kg (10,139-10,229 lb), varies by configuration/series |
| Tipping load (50% capacity basis) | 3,841-3,894 kg (8,468-8,585 lb) |
| Ground pressure | 28 kPa (4.1 psi), per one published spec source only - treat as approximate |
Dimensions
| Overall length (with bucket) | 3,833 mm (12.58 ft / 150.9 in) |
| Width over tracks | 1,981 mm (78 in / 6.5 ft) |
| Height to top of cab | 2,115 mm (6.94-7.0 ft) |
| Ground clearance | 223-226 mm (8.8-8.9 in) |
| Track length on ground | 1,810 mm (5.94 ft) |
Performance
| Travel speed, low range | 9.0-9.2 km/h (5.6-5.7 mph) |
| Travel speed, high range (optional 2-speed) | 15 km/h (9.3 mph) |
| Breakout force | 3,315-3,357 kg (7,308-7,400 lb) |
| Lift capacity at 35% tipping load | 1,344-1,363 kg (2,963-3,005 lb) |
| Lift capacity at 50% tipping load | 1,905-1,922 kg (4,200-4,239 lb) |
| Maximum lift height | 3.29 m (10.8 ft) |
| Hydraulic pump flow, standard | 83-84 L/min (22 gpm) at 23,000 kPa (3,335 psi) |
| Hydraulic pump flow, high-flow XPS option | 125 L/min (33 gpm) |
| Hydraulic system max relief pressure | up to 280 bar (4,061 psi) on high-flow circuit |
| Bucket capacity | 0.4-0.5 m3 (0.6 yd3) |
Service capacities (summary)
| Fuel tank | 98 L (25.9-26 gal) |
| Hydraulic system, total | 57 L (15-15.1 gal) |
| Engine oil | 10 L (2.6-2.7 gal) |
| Cooling system | 14 L (3.7 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
297C fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine Crankcase (with filter) | 10 L (2.6 US gal) — includes about 1 L (0.26 US gal) held in the filter | Cat DEO-ULS or Cat DEO diesel engine oil, formulated for the Cat 3044 (C3.4 DIT) engine used in this machine. Cat DEO-ULS Cold Weather in SAE 0W-40 or SAE 10W-30 for ambient -40°C to 40°C (-40°F to 104°F). Cat DEO-ULS / Cat DEO in SAE 15W-40 for -18°C to 40°C (0°F to 104°F), usable up to 50°C (122°F) in hot climates down to about -9.5°C min. SAE 10W-30 is the preferred grade for this engine family in the -18°C to 40°C (0°F to 104°F) band. Synthetic variants (Cat DEO-ULS SYN, Cat DEO SYN) allowed when running higher-sulfur fuel with an oil-analysis program. |
| Cooling System | 13.9 L (3.7 US gal) | Cat ELC (Extended Life Coolant) is the preferred coolant; Cat DEAC (Diesel Engine Antifreeze/Coolant) is an acceptable alternate. Never run plain water as coolant — it is corrosive at operating temperature and gives no boil/freeze protection. |
| Fuel Tank | 97.5 L (25.8 US gal) | Distillate diesel fuel meeting the Cat distillate fuel specification and ASTM D975 or EN 590. Biodiesel blends up to B20 are acceptable in Cat machine engines, though pump-grade fuel in the US/EU is typically limited to B5–B7; biodiesel use requires closer attention to oil-drain intervals and fuel storage life. |
| Hydraulic Tank (refill) | 39 L (10.3 US gal) per the OMM service-refill table; some spec sheets list the tank near 41.7–42 L (11 US gal) — treat as varying by source/configuration | Cat HYDO Advanced 10 (SAE 10W) or Cat HYDO Advanced 30 (SAE 30W) are preferred; Cat BIO HYDO Advanced is the preferred biodegradable option. Second-choice oils: Cat MTO, Cat DEO, Cat DEO-ULS, Cat TDTO, Cat TDTO Cold Weather, Cat TDTO-TMS. Viscosity by climate: SAE 10W grades for -20°C to 40°C (-4°F to 104°F); SAE 30 / ISO 46 multi-grade oils roughly 0°C to 50°C (32°F to 122°F) or -30°C to 45°C (-22°F to 113°F) depending on product; SAE 0W-20 cold-weather oils down to -40°C (-40°F). |
| Hydraulic System (total wetted capacity, tank + lines + cylinders) | About 56.8–57 L (15 US gal) per published spec sheets — this total is not broken out separately in the OMM's own refill table, which lists only the tank quantity; treat as approximate and varying by configuration | Same fluid family and viscosity guidance as the hydraulic tank above (Cat HYDO Advanced 10/30 preferred, Cat BIO HYDO Advanced for biodegradable service). |
| Final Drive (each side) | 1.0 L (0.26 US gal) per final drive | Cat Synthetic GO gear oil, SAE 75W-140, is preferred. If unavailable, substitute Cat GO (SAE 80W-90 or SAE 85W-140) or an API GL-5 gear oil. Viscosity range covers -30°C to 45°C (-22°F to 113°F). |
| Track Idlers & Track Rollers (each, oil-filled hub) | Track roller about 240 ± 12 mL; single-flange idler about 349 ± 15 mL; dual-flange idler about 354 ± 15 mL | Same oil family as the engine crankcase: Cat DEO-ULS Cold Weather (SAE 0W-40 or SAE 10W-30) for -40°C to 40°C, or Cat DEO-ULS / Cat DEO (SAE 15W-40) for roughly -18°C to 50°C (0°F to 122°F) depending on ambient band. |
| Grease — external lubrication points (spec only) | No refill volume specified; lubricate each pin joint until new grease purges old grease at the joint | Cat Advanced 3Moly (NLGI 2) for -20°C to 40°C (-4°F to 104°F), extending to NLGI 1/0 for -30°C to 50°C (-22°F to 122°F). Cat Ultra 5Moly (NLGI 0/2) for roughly -35°C to 40°C, down to -40°C to 35°C in extreme cold. Cat Arctic Platinum for extreme cold service to about -50°C (-58°F). Cat Desert Gold for hot climates up to 60°C (140°F). The track roller frame recoil-spring lube point uses Cat Advanced 3Moly, -20°C to 40°C. Non-Cat grease must be certified compatible with Cat grease before mixing. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 297C maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 6,000 h |
|
Servicing the 297C beyond the schedule
Predictive Maintenance & Fluid Analysis
Run SOS oil sampling through the factory valves on the C3.4 DIT engine and hydraulic system rather than waiting for the calendar. Watch for trending copper in engine samples, a signature of injector seal wear on this engine family, and rising wear metals in hydraulic samples if the machine runs XPS high-flow attachments. Log track tension and axle-bracket condition at every interval; this generation has a documented undercarriage axle wear pattern that shows up gradually before a bracket cracks or a bolt shears.
Corrective & Common Repairs
The most reported failure on this generation is undercarriage axle wear: bent axles, sheared axle-mount bolts, and cracked brackets where the rear axle passes through the frame, serious enough that Cat extended coverage on affected serial ranges under roughly 1,500 hours. On the C3.4 DIT engine, check for fuel suction-side air leaks and copper injector seals first if you see stalling, misfire, or blue smoke. Turbo oil leaks usually trace back to crankcase pressure, so check the breather before condemning the turbo.
Overhaul & Rebuild Points
Plan undercarriage rebuilds around the rollers, idlers, sprockets, and axle group; this is the highest-wear system on the 297C and the one most likely to need a full rebuild before the engine does. On the powertrain side, budget for hydraulic pump and motor rebuilds tied to SOS trends rather than a fixed hour number. The C3.4 DIT engine typically reaches a top-end and turbocharger overhaul point well before a full inframe is needed if fuel and air filtration were kept current.
Seasonal & Environment Servicing
Cold-weather starts on the C3.4 DIT need block-heater use and correct coolant concentration; let hydraulics warm up before running XPS high-flow attachments in freezing temperatures. In hot, dusty conditions, shorten the air-filter cleaning interval and blow out the radiator and oil cooler fins daily. Mud, frozen ground, and turf work pack the undercarriage fast; clean out rollers and idlers and recheck track tension more often than the standard interval, since packed debris accelerates the axle and bracket wear this model is known for.
297C common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 110-6326 | Filter Element As-Air | Air intake service | Check fitment → |
| 110-6331 | Filter Element As-Air | Air intake service | Check fitment → |
| 265-6618 | Filter Element-Cab Air | Air intake service | Check fitment → |
| 265-6619 | Filter Element-Cab Air | Air intake service | Check fitment → |
| 1G-8878 | Filter As-Oil | Hydraulic service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
297C fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 2474-3 | Left joystick forward/reverse position sensor, voltage above normal | Open or shorted signal circuit, corroded connector at the joystick base, or a worn position sensor inside the left control pod | Inspect the joystick connector and harness for corrosion or chafing, check sensor supply/signal voltage against spec, replace the joystick pod if the sensor will not calibrate |
| 2475-3 | Right joystick forward/reverse position sensor, voltage above normal | Open or shorted signal circuit, corroded connector, or worn position sensor inside the right control pod | Inspect connector and harness for damage, verify sensor voltages against spec, replace the joystick pod if calibration fails |
| 2477-3 | Right joystick left/right (tilt) position sensor, voltage above normal | Open or shorted signal circuit or worn sensor in the right joystick; often trips a hydraulic function lockout | Check connector and wiring, verify sensor output through full travel, replace joystick pod if out of range |
| 2476-3 | Left joystick left/right position sensor, voltage above (FMI 3) or below (FMI 4) normal | Same sensor family as 2474/2475/2477; open/shorted circuit or failing potentiometer/Hall sensor in the left joystick | Inspect connector and harness, check sensor voltage against spec, replace joystick pod if faulty |
| 2688-08 | Right drive motor speed sensor, signal not in expected range (abnormal frequency) | Damaged or misaligned speed sensor, metal debris on the sensor tip, broken tone ring, or a wiring/connector fault; disables closed-loop traction control and unexpected-motor-speed protection | Check sensor air gap and tip for metal debris, inspect wiring and connector for corrosion, test sensor resistance against spec, reseat or replace the sensor |
| 110-3 | Engine coolant temperature sensor circuit, voltage above normal (open circuit or short to supply) | Failed sensor, corroded connector, or chafed wiring on the coolant temp circuit feeding the engine ECM | Inspect connector and harness, check sensor resistance against the temperature/resistance chart, replace sensor if out of spec |
| 100-3 | Engine oil pressure sensor circuit, voltage above normal | Sensor or wiring fault; can also trigger reduced engine power (derate) if the ECM cannot confirm safe oil pressure | Verify actual oil level and pressure with a mechanical gauge, inspect sensor wiring and connector, replace sensor if wiring checks out good |
| 354-5 | Bucket raise solenoid, current below normal (open circuit) | Open solenoid coil, disconnected connector, blown fuse or relay, or damaged harness to the solenoid | Check solenoid connector and coil resistance, inspect fuse/relay and wiring, replace the solenoid coil if open |
| Hydraulic oil temp Level 2 warning | Hydraulic oil temperature has climbed into the caution range (roughly 92 C / 199 F) and the monitor asks the operator to reduce load until it cools | Low hydraulic fluid level, plugged or debris-packed oil cooler, weak or inoperative cooler fan, or sustained heavy hydraulic load in hot ambient conditions | Check fluid level, clean the cooler core, confirm the cooler fan runs and pulls air, back off hydraulic load or idle the machine to let temperature drop |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
297C attachments & work tools
Machine type note
The 297C is Caterpillar's Multi Terrain Loader (rubber-tracked, suspended undercarriage), part of the compact track loader class rather than a wheeled skid steer, though it shares the C-Series skid steer work-tool line and coupler system.
Loader buckets - general purpose/utility
General purpose, utility, light material and multi-purpose buckets are offered in this size class; factory general purpose bucket capacity is about 0.4 m3 (0.6 yd3), sized to the machine's approx. 1650 mm (65 in) operating width.
Grapple buckets
Industrial grapple buckets (for scrap, brush, rock, demolition debris) and lighter utility grapple buckets (farm/ranch/landscape material) are offered in this size class; grapple-equipped bucket widths in the 297C's width class typically run 1680-1830 mm (66-72 in), varies by configuration.
Pallet forks
Frame-mounted pallet fork carriages are offered for palletized material handling, using the same coupler as buckets; capacity is matched to the machine's rated operating capacity of roughly 1905-2070 kg (4200-4560 lb) depending on counterweight.
Brooms/sweepers
Angle and pickup broom/sweeper attachments are offered for yard and site cleanup; hydraulically driven, so they run off the machine's auxiliary hydraulic circuit.
Snow attachments
Snow blades, snow pushers, blowers and snow buckets are offered for this size class; blowers require the auxiliary hydraulic circuit and, on some configurations, a dedicated wiring harness for attachment controls.
Augers
Auger drive units with interchangeable bits are offered for post-hole and footing work; auger drives run off the auxiliary hydraulic circuit and benefit from the continuous-flow control feature.
Forestry/high-flow attachments
Mulcher heads and brush cutters are usable on this class of loader but demand sustained high hydraulic flow; the optional High Flow XPS hydraulic package (versus the standard circuit) is the practical requirement for productive mulching duty.
Grading/trenching/planing attachments
Trenchers, cold planers and similar high-load work tools are offered as compatible attachment classes for this loader category; these are auxiliary-hydraulics-driven and are typically specified with the high-flow hydraulic option for acceptable cycle times.
Quick coupler / mounting system
Standard tool mounting is a manual quick coupler engaged and released with two high-leverage handles at the lift arm; an optional hydraulic quick coupler lets the operator change tools from the cab without leaving the seat.
Hydraulic kit / auxiliary circuit
Standard auxiliary hydraulic flow is about 84 L/min (22.2 gal/min) at roughly 23000 kPa (3336 psi) relief pressure; the optional High Flow XPS arrangement raises this to roughly 125 L/min (33 gal/min) at up to about 28000 kPa (4061 psi) for demanding work tools. Continuous-flow control keeps auxiliary flow supplied to a tool without holding the control lever, and flat-face quick-disconnect couplings with routed hose guarding (split D-ring along the left lift arm) are standard for hose protection during tool changes.
Guarding and cab options
Cab door glazing is offered in glass or polycarbonate for a heated, enclosed ROPS cab; lift-arm and FOPS Level 2 overhead guarding kits are available as factory/retrofit options, though these guarding kits are mutually exclusive with certain lifting-eye and cooler kit options on the same machine.
Undercarriage configuration
Offered with either a single-level suspension undercarriage or a dual-level suspension undercarriage with oscillating bogie wheels; the dual-level setup puts more track on the ground for better load retention and ride, which affects performance when running heavier or grading-type work tools.
All 297C assemblies by section
Every catalogued assembly group for the Caterpillar 297C. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
258-2548 Aftercooler & Mounting Gp -With Fan
| 15***98 | Band-Mounting | 1 |
| 23***25 | Indicator | 1 |
| 25***48 | Aftercooler & Mounting Group; -With Fan | 1 |
280-8294 Air Cleaner Gp
| 28***94 | Air Cleaner Group | 1 |
| 28***55 | Guard As-Exhaust; (Turbocharger) | 1 |
| 28***91 | Flange, Guard-Exhaust; (Manifold) | 1 |
258-3453 Air Cleaner Gp
| 25***53 | Air Cleaner Group | 1 |
| 27***52 | Guard-Exhaust; (Manifold) | 1 |
| 28***55 | Guard As-Exhaust; (Turbocharger) | 1 |
258-3320 Air Cleaner Gp
| 25***20 | Air Cleaner Group | 1 |
| 28***55 | Guard As-Exhaust; (Turbocharger) | 1 |
| 28***91 | Flange, Guard-Exhaust; (Manifold) | 1 |
258-2463 Air Cleaner Gp
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 2 |
| 13***43 | Clamp-Hose | 1 |
| 25***63 | Air Cleaner Group | 1 |
280-8393 Guard Gp-Debris -Turbocharger, Exhaust Manifold
| 28***93 | Guard Group-Debris; -Turbocharger, Exhaust Manifold | 1 |
| 5I***78 | Gasket | 1 |
| 5I***21 | Elbow Assem. | 1 |
272-3062 Kit-Debris Guard -Turbocharger, Exhaust Manifold
| 10***51 | Hose | 1 |
| 21***12 | Clamp | 3 |
| 21***66 | Hose | 1 |
280-8392 Kit-Debris Guard -Turbocharger, Exhaust Manifold
| 25***43 | Hose As-Air | 1 |
| 28***92 | Kit-Debris Guard; -Turbocharger, Exhaust Manifold | 1 |
| 5P***68 | Clamp-Hose; (Us Sourced) | 1 |
258-3263 Lines Gp-Air
| 19***22 | Bolt As; (M8x1.25x22-mm) | 4 |
| 25***63 | Lines Group-Air | 1 |
| 27***82 | Clip | 2 |
316-0471 Lines Gp-Air
| 09***49 | Bolt; (M8x1.25x40-mm) | 11 |
| 23***05 | Manifold-Inlet | 1 |
| 23***06 | Gasket; (Inlet Manifold) | 1 |
247-6317 Lines Gp-Air
| 09***00 | Washer; (1.5mm Thk) | 2 |
| 24***17 | Lines Group-Air | 1 |
| 25***12 | Clip | 1 |
315-7769 Lines Gp-Air
| 09***49 | Bolt; (M8x1.25x40-mm) | 12 |
| 23***05 | Manifold-Inlet | 1 |
| 23***06 | Gasket; (Inlet Manifold) | 1 |
258-3444 Lines Gp-Air
| 19***60 | Nut; (M8x1.25-Thd) | 8 |
| 23***60 | Bolt | 8 |
| 23***24 | Gasket-Manifold | 1 |
287-5323 Manifold Gp-Exhaust
| 19***76 | Washer-Hard; (8.8x20x8-mm Thk) | 3 |
| 23***21 | Nut; (M10x1.25-Thd) | 1 |
| 25***19 | Muffler As | 1 |
335-5750 Manifold Gp-Inlet
| 09***00 | Washer; (1.5mm Thk) | 3 |
| 19***06 | Gasket | 4 |
| 23***18 | Gasket | 1 |
287-4832 Manifold Gp-Inlet
| 19***76 | Washer-Hard; (8.8x20x8-mm Thk) | 3 |
| 23***21 | Nut; (M10x1.25-Thd) | 1 |
| 27***50 | Muffler As | 1 |
258-2462 Muffler & Mounting Gp
| 09***00 | Washer; (1.5mm Thk) | 3 |
| 19***06 | Gasket | 4 |
| 23***18 | Gasket | 1 |
280-8347 Muffler & Mounting Gp
| 13***87 | Clip | 1 |
| 19***36 | Insert-Threaded; (M6x1-Thd) | 3 |
| 23***96 | Screw-Flat Head; (M6x1x35-mm) | 4 |
316-0472 Turbocharger Gp
| 13***87 | Clip | 1 |
| 19***36 | Insert-Threaded; (M6x1-Thd) | 3 |
| 23***96 | Screw-Flat Head; (M6x1x35-mm) | 4 |
235-5894 Turbocharger Gp
| 13***87 | Clip | 1 |
| 19***36 | Insert-Threaded; (M6x1-Thd) | 3 |
| 23***94 | Turbocharger Group | 1 |
Basic Engine
323-2009 Accessory Gp-Engine
292-4041 Bearing Gp-Main
233-5473 Camshaft Gp
316-0447 Camshaft Gp
287-4033 Connecting Rod Gp
315-7762 Cover Gp-Valve Mechanism
| 09***41 | Cap | 4 |
| 09***20 | Pin | 2 |
| 10***62 | Bushing | 1 |
233-5480 Cover Gp-Valve Mechanism
| 08***13 | Pin | 2 |
| 09***28 | Key | 2 |
| 13***96 | Nut | 1 |
314-9860 Crankshaft Gp
| 21***75 | Cap | 7 |
| 23***53 | Cylinder Head | 1 |
| 23***54 | Bolt; (M12x1.75x115-mm) | 17 |
287-4649 Crankshaft Gp
| 09***41 | Cap | 10 |
| 09***20 | Pin | 2 |
| 10***76 | Bolt-Bearing Cap | 10 |
287-2416 Cylinder Block Gp
| 10***46 | Bolt-Cylinder Head | 17 |
| 10***47 | Guide-Valve | 8 |
| 10***52 | Seat-Valve; (Inlet) | 4 |
330-7633 Cylinder Block Gp
| 10***46 | Bolt-Cylinder Head | 17 |
| 29***45 | Gasket-Head | 1 |
| 31***62 | Stud | 1 |
315-7760 Cylinder Head Gp
| 03***39 | Gear-Starter; (112-Teeth) | 1 |
| 22***93 | Bolt; (M12x1.25x30-mm) | 4 |
| 23***91 | Flywheel As | 1 |
233-5500 Cylinder Head Gp
| 11***70 | Cap | 1 |
| 1P***78 | Clamp; (Hose) | 1 |
| 21***19 | Adapter | 1 |
258-2452 Drain Gp-Engine Oil
| 11***27 | Gear; (46-Teeth) | 1 |
| 11***29 | Gear; (23-Teeth) | 1 |
| 11***83 | Gear As-Idler; (49-Teeth) | 1 |
235-5890 Flywheel Gp
| 11***27 | Gear; (46-Teeth) | 1 |
| 11***29 | Gear; (23-Teeth) | 1 |
| 11***85 | Gear-Pump; (Oil, 31-Teeth) | 1 |
314-9861 Flywheel Gp
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 4 |
| 13***22 | Bolt-Locking; (M8x1.25x16-mm) | 2 |
| 25***43 | Guard-Belt | 1 |
315-7766 Gear Gp-Front
| 10***80 | Gasket-Rear | 1 |
| 11***15 | Seal As-Oil | 1 |
| 14***17 | Bolt; (M10x1.25x25-mm) | 10 |
287-4830 Gear Gp-Front
| 09***15 | Lockwasher | 2 |
| 10***80 | Gasket-Rear | 1 |
| 11***15 | Seal As-Oil | 1 |
258-2469 Guard Gp-Belt
| 09***29 | Seal-O-Ring (Id=139.5mm); (Id=139.50mm) | 1 |
| 10***77 | Gasket-Front Plate | 1 |
| 11***47 | Gasket; (Gear Case) | 1 |
287-3357 Housing Gp-Flywheel
| 09***00 | Washer; (1.5mm Thk) | 2 |
| 09***29 | Seal-O-Ring (Id=139.5mm); (Id=139.50mm) | 1 |
| 19***12 | Bolt; (M6x1x18-mm) | 4 |
315-7764 Housing Gp-Flywheel
| 19***05 | Bolt As | 4 |
| 23***66 | Eye | 1 |
| 23***68 | Gasket; (Rear Head) | 1 |
315-8336 Housing Gp-Front
| 11***90 | Mount As | 2 |
| 12***80 | Locknut; (M12x1.75-Thd) | 1 |
| 14***88 | Mount-Engine | 2 |
287-3074 Housing Gp-Front
| 23***66 | Eye | 1 |
| 23***68 | Gasket; (Rear Head) | 1 |
| 28***74 | Housing Group-Front | 1 |
287-1844 Lifting Gp-Engine
| 16***01 | Sealant-Silicone | 0 |
| 19***03 | Bolt As | 1 |
| 23***11 | Washer | 1 |
315-7761 Lifting Gp-Engine
| 09***82 | Gasket, Oil Drain | 1 |
| 13***32 | Plug; (Drain, Engine Oil) | 1 |
| 16***01 | Sealant-Silicone | 1 |
258-2447 Mounting Gp-Engine
| 09***82 | Gasket, Oil Drain | 1 |
| 13***32 | Plug; (Drain, Engine Oil) | 1 |
| 16***01 | Sealant-Silicone | 1 |
335-5772 Pan Gp-Oil
| 33***72 | Pan Group-Oil | 1 |
| 5I***05 | Plug | 6 |
316-0469 Pan Gp-Oil
| 23***15 | Pin-Piston | 4 |
| 25***38 | Ring-Snap | 8 |
| 31***62 | Ring-Piston; (Standard) | 4 |
287-3921 Pan Gp-Oil
| 22***04 | Set-Piston Ring; (Standard) | 4 |
| 23***14 | Piston; (Standard) | 4 |
| 23***15 | Pin-Piston | 4 |
235-5889 Piston Gp
| 19***11 | Plug | 1 |
| 23***89 | Piston Group | 1 |
316-0470 Piston Gp
| 28***48 | Pulley-Crankshaft | 1 |
| 31***70 | Piston Group | 1 |
287-2922 Plug Gp-Engine
| 28***22 | Plug Group-Engine; -Cylinder Block, Lh | 1 |
| 30***97 | Pulley-Crankshaft; (2-Groove) | 1 |
287-2983 Plug Gp-Engine
| 23***07 | Pulley | 1 |
| 28***83 | Plug Group-Engine; -Cylinder Block, Rh | 1 |
| 8T***42 | Bolt; (M8x1.25x14-mm) | 4 |
287-4749 Pulley Gp-Crankshaft
| 28***49 | Pulley Group-Crankshaft | 1 |
| 35***69 | V-Belt; (Water Pump) | 1 |
301-3396 Pulley Gp-Crankshaft
| 09***05 | Cap | 1 |
| 19***24 | Ring-Snap | 2 |
| 22***45 | Rocker As | 8 |
287-6114 Pulley Gp-Water Pump
| 11***68 | Clip | 2 |
| 15***28 | Clamp | 1 |
| 19***22 | Bolt As; (M8x1.25x22-mm) | 2 |
287-6138 V-Belt Gp
| 15***28 | Clamp | 2 |
| 23***37 | Clip-Hose | 1 |
| 23***38 | Clip | 3 |
235-5880 Valve Mechanism Gp
| 09***37 | Seal-O-Ring | 1 |
| 09***71 | Seal-O-Ring (Id=94.40mm) | 1 |
| 1R***34 | Filter-Engine Oil | 1 |
Cooling System
314-9900 Cooler Gp-Engine Oil
| 09***75 | Bolt; (25-mm Long) | 2 |
| 23***09 | Washer-Special | 1 |
| 23***31 | Cover | 1 |
235-5896 Cooler Gp-Engine Oil
| 23***96 | Cooler Group-Engine Oil | 1 |
| 23***78 | Valve As-Drain | 1 |
292-4040 Drain Gp-Coolant
| 16***15 | Cap-Vented; (Coolant Recovery Tank) | 1 |
| 1P***78 | Clamp; (Hose) | 2 |
| 22***78 | Clamp-Tbolt; (M5x0.8) | 4 |
315-8355 Housing & Regulator Gp
| 14***32 | Pin As | 1 |
| 17***55 | Pin | 2 |
| 20***76 | Stud-Ball | 4 |
258-3553 Lines Gp-Water
| 25***53 | Lines Group-Water | 1 |
| 28***66 | Bolt; (M8x1.25x65-mm) | 1 |
| 33***17 | Pump Group-Water | 1 |
235-5900 Lines Gp-Water
| 14***32 | Pin As | 1 |
| 17***55 | Pin | 2 |
| 20***76 | Stud-Ball | 4 |
258-3542 Mounting Gp-Rad & Oil Cooler
| 03***65 | Cap As-Radiator; (Sea Water Heat Exchanger) | 1 |
| 06***80 | Fitting | 1 |
| 12***52 | Spacer; (10.5x20x28-mm Thk) | 1 |
287-6056 Pump Gp-Water
| 11***63 | Clip-Spring | 2 |
| 13***40 | Locknut; (M8x1.25-Thd) | 2 |
| 14***32 | Pin As | 1 |
335-9117 Pump Gp-Water
| 25***11 | Plate | 1 |
| 25***53 | Air Cleaner Group | 1 |
| 26***15 | Bolt-Flange Head; (M8x1.25x25.5-mm) | 2 |
258-3459 Radiator & Hyd Oil Cooler Gp
| 11***26 | Filter Element As-Air; (Primary) | 1 |
| 11***31 | Filter Element As-Air; (Secondary) | 1 |
| 11***17 | Valve-Dust; (Air Cleaner) | 1 |
Electrical And Starting System
315-8353 Alternator Gp-Charging
| 11***71 | Puller-Minifuse | 1 |
| 25***27 | Screw-Truss Head; (No 12x17.46-mm) | 2 |
| 25***37 | Film-Fuse Panel | 1 |
287-6361 Alternator Gp-Charging
| 03***05 | Terminal-Cable; (00-Ga, 5/16-In Screw) | 1 |
| 11***16 | Block | 1 |
| 1P***10 | Tape (Order By The Meter) (Use As | 0 |
105-2814 Alternator Gp-Charging
| 10***14 | Alternator Group-Charging | 2 |
| 23***62 | Plate | 1 |
| 23***73 | Bolt; (M10x1.5x90-mm) | 1 |
258-4121 Battery & Wiring Gp
| 22***41 | Element As-Jacket Water Heater; (120-Volt, 530-Watt) | 1 |
| 22***42 | Heater Group-Jacket Water | 1 |
| 23***03 | Gasket | 1 |
310-5289 Control Gp-Machine
| 13***17 | Cap As-Dust | 1 |
| 21***12 | Cord As | 1 |
| 22***35 | Element As-Jacket Water Heater; (240-Volt, 530-Watt) | 1 |
258-4144 Cover Gp-Fuse Panel
| 15***28 | Spacer; (7x16x20-mm Thk) | 4 |
| 25***27 | Screw-Truss Head; (No 12x17.46-mm) | 9 |
| 25***44 | Cover Group-Fuse Panel | 1 |
258-4103 Electronics Gp-Machine
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***17 | Tape; (5.5m) | 0 |
347-4186 Electronics Gp-Monitor -Monitor
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***17 | Tape; (5.5m) | 0 |
347-4187 Electronics Gp-Monitor
| 15***71 | Kit-Connecting Plug; (4-Pin) | 0 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 2 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
235-5904 Glow Plug Gp
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***39 | Relay As | 3 |
218-0943 Heater Gp-Jacket Water
| 10***53 | Case, Spacer; (Spherical) | 1 |
| 10***54 | Spacer; (Spherical) | 1 |
| 10***55 | Washer; (Spherical) | 1 |
218-0942 Heater Gp-Jacket Water
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 20***14 | Lens As; (Floodlight) | 1 |
| 21***42 | Heater Group-Jacket Water | 1 |
258-4145 Kit-Control Mounting -Product Link
| 10***53 | Case, Spacer; (Spherical) | 1 |
| 10***54 | Spacer; (Spherical) | 1 |
| 10***55 | Washer; (Spherical) | 1 |
258-4185 Kit-Security
| 25***85 | Kit-Security | 1 |
| 9R***42 | Plug As | 1 |
| 9R***58 | Cord As | 1 |
328-2366 Kit-Wiring Harness -Accugrade
| 23***28 | Lamp Group-Flood; -Front, Rear, Wide Range | 2 |
| 32***66 | Kit-Wiring Harness; -Accugrade | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
258-4127 Kit-Work Tool Wiring
| 08***48 | Lamp; (12-Volt, 5-Watt) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
234-4328 Lamp Gp-Flood
| 08***48 | Lamp; (12-Volt, 5-Watt) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
195-0189 Lamp Gp-Head & Signal -Rh-High, Low Beam
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 16***95 | Lens | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
195-0190 Lamp Gp-Head & Signal -Lh-High, Low Beam
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 19***90 | Lamp Group-Head & Signal; -Lh-High, Low Beam | 1 |
128-6985 Lamp Gp-Warning Beacon -Amber, Magnetic Mount, Rotating
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 24***97 | Cable-Coiled; (Sensor) | 1 |
| 25***29 | Receiver Group-Laser; (Lr410) | 1 |
309-1325 Lamp Gp-Warning Beacon -Amber
| 1H***44 | Lockwasher (Bracket To Cab) | 2 |
| 26***80 | Fuse; (20-Ampere)(Main) | 1 |
| 26***01 | Fuse; (60-Ampere)(Power, 1) | 1 |
258-4164 Lighting Gp-Flood -Work Lights, Front
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 3 |
| 25***64 | Lighting Group-Flood; -Work Lights, Front | 1 |
258-4130 Lighting Gp-Roading -Head, Signal, Stop, Tail
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 17***49 | Strap; (Marker) | 1 |
| 25***30 | Lighting Group-Roading; -Head, Signal, Stop, Tail | 1 |
333-4957 Lighting Gp-Roading -Rear
| 23***74 | Switch-Temperature; (Engine Coolant, Cold Start) | 1 |
| 32***52 | Switch-Oil Press; (Engine) | 1 |
| 33***57 | Lighting Group-Roading; -Rear | 1 |
258-4169 Lighting Gp-Stop & Tail
| 25***69 | Lighting Group-Stop & Tail | 1 |
| 30***87 | Control Group-Unprogrammed; (Transmission) | 1 |
| 35***39 | Software Group-Machine | 1 |
258-4184 Lighting Gp-Warning Beacon -Amber, Magnetic Mount, Rotating
| 25***84 | Lighting Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 34***36 | Control Group-Unprgmed Monitor; (Machine) | 1 |
| 35***58 | Software Group-Monitor | 1 |
292-1271 Mast Gp -Accugrade Laser
| 10***85 | Cap-Starting Motor | 1 |
| 10***12 | Kit-Contact; (Starting Motor) | 1 |
| 10***13 | Switch As; (Starting Motor)(12-Volt) | 1 |
258-4135 Relay Gp -Main Power
| 14***39 | Starting Motor Group-Electric; -12-Volt | 1 |
| 25***35 | Relay Group; -Main Power | 1 |
266-1467 Sensor Gp-Position -Rotary
| 26***67 | Sensor Group-Position; -Brake Pedal | 1 |
| 32***52 | Switch-Oil Press; (Engine) | 1 |
262-3764 Sensor Gp-Speed
| 10***05 | Cap-Receptacle | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
191-8303 Sensor Gp-Speed
| 10***74 | Seal-Connector | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
238-8277 Sensor Gp-Temp & Press -Engine
| 03***12 | Terminal-Ring; (2-Ga, 1/4-In Screw)(Circuit Breaker) | 1 |
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
143-0539 Starting Motor Gp-Electric
| 03***12 | Terminal-Ring; (2-Ga, 1/4-In Screw)(Circuit Breaker) | 1 |
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
287-6181 Starting Motor Gp-Electric
| 17***20 | Strap-Dual Clamp | 5 |
| 1M***19 | Bolt; (5/16-18x1.375-In)(5/16-18x1.375 In) | 1 |
| 1M***20 | Nut-Battery Terminal (5/16-18 Thd); (5/16-18-Thd)(5/16-18x1.375 In) | 2 |
300-1071 Switch Gp-Pressure
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***62 | Screw-Machine; (4-40x0.63-In) | 4 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
258-4100 Wiring Gp-Cab
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
258-4115 Wiring Gp-Engine
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***39 | Relay As | 5 |
258-4193 Wiring Gp-Engine
| 21***32 | Nut-Jam; (1/4-7-Thd) | 1 |
| 25***71 | Motor Group-Piston; -2-Speed | 1 |
| 25***79 | Support-Motor; (Rh) | 1 |
336-0913 Wiring Gp-Grade Control
| 21***32 | Nut-Jam; (1/4-7-Thd) | 1 |
| 25***71 | Motor Group-Piston; -2-Speed | 1 |
| 25***82 | Support-Motor; (Lh) | 1 |
258-4146 Wiring Gp-Heater
| 21***32 | Nut-Jam; (1/4-7-Thd) | 1 |
| 25***70 | Motor Group-Piston; -1-Speed | 1 |
| 25***79 | Support-Motor; (Rh) | 1 |
258-4107 Wiring Gp-Machine
| 21***32 | Nut-Jam; (1/4-7-Thd) | 1 |
| 25***70 | Motor Group-Piston; -1-Speed | 1 |
| 25***82 | Support-Motor; (Lh) | 1 |
258-4190 Wiring Gp-Quick Coupler
| 21***32 | Nut-Jam; (1/4-7-Thd) | 1 |
| 25***70 | Motor Group-Piston; -1-Speed | 1 |
| 25***83 | Tensioner Group-Track | 1 |
258-4125 Wiring Gp-Work Tool
| 21***32 | Nut-Jam; (1/4-7-Thd) | 1 |
| 25***70 | Motor Group-Piston; -1-Speed | 1 |
| 25***83 | Tensioner Group-Track | 1 |
Engine Arrangement
258-2519 Engine Ar
287-8075 Engine Ar-Primary
319-6807 Engine Ar-Primary
262-7290 Engine Ar-Primary
295-7115 Engine Ar-Primary
295-7119 Installation Ar-Engine
258-2446 Installation Ar-Engine
Frame And Body
258-3800 Conversion Ar-Roading -Nacd
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 12***54 | Fastener; (Loop) (22cm) (X3) | 0 |
258-3810 Conversion Ar-Roading -Germany
| 25***10 | Conversion Ar-Roading; -Germany | 1 |
| 31***41 | Counterweight | 4 |
| 7X***49 | Bolt (M12x1.75x100mm); (M12x1.75x100-mm) | 4 |
258-3809 Conversion Ar-Roading -Outside Nacd
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***54 | Fastener; (Loop) (22cm) (X3) | 0 |
| 12***55 | Fastener-Hook; (18-cm Each) | 0 |
258-3812 Conversion Ar-Roading -Italy
| 25***12 | Conversion Ar-Roading; -Italy | 1 |
| 31***94 | Grill | 1 |
| 7T***99 | Link | 1 |
315-6355 Conversion Ar-Roading
| 14***32 | Pin As | 1 |
| 15***05 | Bolt-Shoulder | 2 |
| 22***40 | Latch As | 1 |
258-3841 Conversion Gp-Roading -Italy
| 22***15 | Plate As | 1 |
| 24***77 | Bolt; (M8x1.25x12-mm) | 1 |
| 25***41 | Conversion Group-Roading; -Italy | 1 |
258-3840 Conversion Gp-Roading -Germany
| 25***78 | Plate As | 1 |
| 25***86 | Plate As | 1 |
| 25***12 | Plate | 1 |
258-2591 Counterweight Gp
| 25***91 | Counterweight Group | 1 |
| 31***41 | Counterweight | 2 |
| 7X***49 | Bolt (M12x1.75x100mm); (M12x1.75x100-mm) | 4 |
322-1644 Door As-Access -Vented
| 25***92 | Plate | 8 |
| 32***44 | Door As-Access; -Vented | 1 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 4 |
258-2594 Enclosure Gp-Engine
| 25***94 | Enclosure Group-Engine | 1 |
| 28***67 | Film-Instruction; (Service Chart, Read Omm)(Service Chart) | 1 |
| 28***68 | Film-Instruction; (Service Chart, Read Omm)(Service Chart) | 1 |
258-3775 Frame & Mtg Gp-Machine
| 12***18 | Seal; (1000-cm) | 0 |
| 17***79 | Insulation | 1 |
| 25***75 | Frame & Mtg Group-Machine | 1 |
258-3774 Frame Gp-Machine
| 08***48 | Lamp; (12-Volt, 5-Watt) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
150-8621 Guide Gp-Lines
| 15***21 | Guide Group-Lines | 1 |
| 17***91 | Nut-Spring | 4 |
| 17***16 | Chock | 1 |
287-4160 Kit-Counterweight
287-4161 Kit-Counterweight
312-1024 Kit-Engine Enclosure -Vented
310-6610 Kit-Machine Enclosure Seal -Debris Barrier
342-2685 Kit-Machine Enclosure Seal
333-7434 Kit-Roading Conversion -Germany
333-7436 Kit-Roading Conversion -Front
315-7815 Kit-Roading Conversion -Germany
333-7435 Kit-Roading Conversion -Italy
315-7816 Kit-Roading Conversion -Italy
258-3884 Kit-Roading Conversion -Lights, Mirrors
258-4390 Lifting Gp-Machine -Kit, Single Point
258-4385 Lifting Gp-Machine -Four Point
258-4410 Lifting Gp-Machine -Kit, Four Point
258-3872 Mirror & Mtg Gp-Rear View -With Roading Light Mount
258-3848 Mounting Gp-Registration -Italian
307-6237 Mounting Gp-Roading Lights -Kit, Germany, Italy
280-8330 Suppression Gp-Sound -Engine
294-4560 Suppression Gp-Sound -Machine
258-3496 Suppression Gp-Sound -Machine
Fuel System
295-7465 Control Gp-Governor
| 09***35 | Cap | 1 |
| 09***90 | Shim (1.800mm Thick) | 0 |
| 09***94 | Shim (0.700mm Thick) | 0 |
258-4040 Control Gp-Governor
| 06***80 | Fitting | 1 |
| 11***01 | Bowl As-Water Collection | 1 |
| 11***18 | Ring-Retaining | 1 |
295-7029 Lines Gp-Fuel
| 06***80 | Fitting | 1 |
| 11***01 | Bowl As-Water Collection | 1 |
| 11***18 | Ring-Retaining | 1 |
235-5901 Lines Gp-Fuel Injection
| 21***10 | Nut | 1 |
| 22***43 | Gasket | 1 |
| 22***44 | Flange | 1 |
316-0473 Lines Gp-Fuel Injection
| 14***17 | Bolt; (M10x1.25x25-mm) | 1 |
| 19***54 | Bolt; (M10x1.25x25-mm) | 1 |
| 21***10 | Nut | 1 |
258-2444 Lines Gp-Fuel Prm & Filter
| 14***17 | Bolt; (M10x1.25x25-mm) | 1 |
| 19***33 | Bolt | 2 |
| 21***10 | Nut | 1 |
316-0474 Pump Gp-Fuel Injection
| 00***64 | Seal-O-Ring | 1 |
| 14***28 | Elbow | 1 |
| 23***37 | Fitting | 1 |
340-5861 Pump Gp-Fuel Injection
| 11***58 | Pulley-Alternator | 1 |
| 11***59 | Frame As-Alternator | 1 |
| 11***60 | Rotor As-Alternator | 1 |
235-5902 Pump Gp-Fuel Injection
| 14***17 | Bolt; (M10x1.25x25-mm) | 1 |
| 19***33 | Bolt | 2 |
| 21***10 | Nut | 1 |
258-3442 Pump Gp-Fuel Prm & Prim Filter -Water Separator
| 10***14 | Alternator Group-Charging | 1 |
| 23***62 | Plate | 1 |
| 23***73 | Bolt; (M10x1.5x90-mm) | 1 |
258-2439 Tank & Mtg Gp-Fuel
| 10***14 | Alternator Group-Charging | 1 |
| 23***62 | Plate | 1 |
| 23***73 | Bolt; (M10x1.5x90-mm) | 1 |
258-2440 Tank Gp-Fuel
| 23***62 | Plate | 1 |
| 23***73 | Bolt; (M10x1.5x90-mm) | 1 |
| 23***72 | Alternator Group-Charging | 1 |
Hydraulic System
149-0686 Accumulator Gp-Hydraulic -Charged
| 14***86 | Accumulator Group-Hydraulic; -Charged | 1 |
| 25***97 | Bearing-Sleeve | 1 |
| 27***70 | Kit-Seal; (Hydraulic Cylinder) | 1 |
227-8807 Accumulator Gp-Hydraulic -Uncharged
| 21***24 | Kit-Seal; (Lift) | 2 |
| 22***07 | Accumulator Group-Hydraulic; -Uncharged | 1 |
| 25***14 | Cylinder Group-Tilt; -Rh | 1 |
154-5018 Cylinder Gp-Bucket
| 15***18 | Cylinder Group-Bucket | 1 |
| 21***43 | Fitting As; (Quick Disconnect, Male) | 1 |
| 21***44 | Fitting As; (Quick Disconnect, Male) | 1 |
293-6264 Cylinder Gp-Bucket
| 21***45 | Fitting As; (Quick Disconnect, Female) | 1 |
| 21***46 | Fitting As; (Quick Disconnect, Female) | 1 |
| 29***64 | Cylinder Group-Bucket | 1 |
255-0943 Cylinder Gp-Grapple
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
| 22***74 | Spacer; (13x20x7-mm Thk) | 1 |
| 25***43 | Cylinder Group-Grapple | 1 |
164-9295 Cylinder Gp-Grapple
| 16***95 | Cylinder Group-Grapple | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
| 30***52 | Tee | 1 |
278-1975 Cylinder Gp-Grapple -Industrial
| 15***49 | Connector As. | 2 |
| 16***08 | Connector Group | 2 |
| 17***05 | Bolt-Socket Head; (M8x1.25x12-mm) | 2 |
192-2640 Cylinder Gp-Hydraulic -Coupler
| 15***49 | Connector As. | 4 |
| 16***08 | Connector Group | 2 |
| 17***05 | Bolt-Socket Head; (M8x1.25x12-mm) | 2 |
278-1969 Cylinder Gp-Hydraulic
| 25***76 | Lines Group-Hydraulic | 1 |
| 27***69 | Cylinder Group-Hydraulic | 1 |
258-2516 Cylinder Gp-Lift
| 25***20 | Lines Group-Work Tool | 1 |
| 25***04 | Valve Group-Control | 1 |
| 25***16 | Cylinder Group-Lift | 1 |
293-5713 Cylinder Gp-Lift
| 25***23 | Lines Group-Work Tool; -High Flow | 1 |
| 25***05 | Valve & Mtg Group-Control | 1 |
| 25***86 | Lines Group-Hydraulic Fan | 1 |
258-2559 Cylinder Gp-Lift Arm -Vertical Lift
| 25***07 | Pump & Mtg Group-Hydrostatic | 1 |
| 25***13 | Lines Group-Lift Cylinder | 1 |
| 25***14 | Lines Group-Tilt Cylinder | 1 |
293-5712 Cylinder Gp-Tilt -Lh
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***39 | Relay As | 1 |
| 14***15 | Connector As | 1 |
293-5711 Cylinder Gp-Tilt -Rh
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***13 | Coupling-Permanent | 1 |
258-2515 Cylinder Gp-Tilt -Lh
| 25***07 | Pump & Mtg Group-Hydrostatic | 1 |
| 25***13 | Lines Group-Lift Cylinder | 1 |
| 25***14 | Lines Group-Tilt Cylinder | 1 |
258-2514 Cylinder Gp-Tilt -Rh
| 25***23 | Lines Group-Work Tool; -High Flow | 1 |
| 25***05 | Valve & Mtg Group-Control | 1 |
| 25***14 | Cylinder Group-Tilt; -Rh | 1 |
218-5841 Fitting Gp-Hydraulic -Quick Disconnect, Female, High Flow
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
292-2439 Fitting Gp-Hydraulic -1-Speed
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
285-2190 Fitting Gp-Hydraulic -Manual
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***95 | Fitting As; (Quick Disconnect, Male) | 1 |
320-8526 Fitting Gp-Hydraulic
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
218-5840 Fitting Gp-Hydraulic -Quick Disconnect, Male, High Flow
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
320-8525 Fitting Gp-Hydraulic
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
258-2604 Hydraulic Ar
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
295-7299 Hydraulic Ar
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 16***89 | Hose As | 2 |
258-2567 Hydraulic Ar
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***95 | Fitting As; (Quick Disconnect, Male) | 1 |
258-3732 Hydraulic Ar
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 13***51 | Spacer; (11x19x6-mm Thk) | 1 |
| 14***25 | Connector As. | 4 |
258-2426 Hydraulic Ar
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
258-3735 Hydraulic Ar
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 16***89 | Hose As | 2 |
258-3358 Hydraulic Ar -Work Tool Positioner
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 13***51 | Spacer; (11x19x6-mm Thk) | 1 |
| 14***25 | Connector As. | 4 |
258-2568 Hydraulic Ar
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***95 | Fitting As; (Quick Disconnect, Male) | 1 |
258-3911 Kit-Quick Coupler Conversion -Hydraulic
| 14***41 | Connector Group | 2 |
| 25***80 | Tube As | 1 |
| 25***81 | Tube As | 1 |
294-5580 Kit-Work Tool Positioner -Self-Leveling Hydraulics
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***39 | Relay As | 1 |
| 14***15 | Connector As | 1 |
279-5412 Lines Gp-Bucket -Industrial
| 14***39 | Clamp | 2 |
| 14***54 | Elbow; (45) (-8/-8 Orb/Orfs) | 2 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 2 |
285-6113 Lines Gp-Bucket -Utility
| 11***49 | Fitting As; (Quick Disconnect) | 1 |
| 14***62 | Elbow Group | 1 |
| 15***49 | Elbow As | 1 |
293-0140 Lines Gp-Bucket -Multipurpose
| 15***49 | Elbow As | 1 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 2 |
| 19***08 | Adapter | 1 |
154-5019 Lines Gp-Bucket
| 11***61 | Hose As | 1 |
| 14***15 | Connector As | 2 |
| 14***16 | Connector Group | 2 |
279-5414 Lines Gp-Bucket -Multipurpose
| 11***61 | Hose As | 1 |
| 14***15 | Connector As | 2 |
| 14***16 | Connector Group | 2 |
279-5416 Lines Gp-Bucket -Multipurpose
| 14***97 | Block | 2 |
| 25***40 | Hose As | 4 |
| 25***64 | Tube As | 1 |
154-5052 Lines Gp-Bucket
| 11***61 | Hose As | 1 |
| 14***15 | Connector As | 2 |
| 14***16 | Connector Group | 2 |
279-5413 Lines Gp-Bucket -Multipurpose
| 11***61 | Hose As | 1 |
| 14***15 | Connector As | 2 |
| 14***16 | Connector Group | 2 |
279-5415 Lines Gp-Bucket -Multipurpose
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 17***25 | Elbow As | 1 |
| 25***81 | Tube As | 1 |
258-3724 Lines Gp-Coupler
| 11***49 | Fitting As; (Quick Disconnect) | 2 |
| 14***61 | Elbow Group | 1 |
| 14***62 | Elbow Group | 1 |
286-9279 Lines Gp-Grapple
| 11***49 | Fitting As; (Quick Disconnect) | 1 |
| 14***52 | Elbow As. | 1 |
| 14***61 | Elbow Group | 1 |
286-9250 Lines Gp-Grapple
| 11***49 | Fitting As; (Quick Disconnect) | 2 |
| 14***52 | Elbow As. | 1 |
| 14***61 | Elbow Group | 1 |
258-2878 Lines Gp-Hydraulic -Work Tool Positioner
| 10***03 | Plate-Cover | 3 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
| 14***93 | Elbow Group | 2 |
258-2876 Lines Gp-Hydraulic
| 06***58 | Clamp | 2 |
| 10***03 | Plate-Cover | 3 |
| 14***93 | Elbow Group | 2 |
258-2582 Lines Gp-Hydraulic Fan -Radiator
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 13***51 | Spacer; (11x19x6-mm Thk) | 1 |
258-2786 Lines Gp-Hydraulic Fan
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
| 15***43 | Connector As. | 1 |
258-2587 Lines Gp-Hydraulic Fan -Aftercooler
| 14***86 | Accumulator Group-Hydraulic; -Charged | 1 |
| 19***03 | Elbow As | 1 |
| 19***31 | Elbow; (45-Deg) | 1 |
258-2580 Lines Gp-Hydraulic Oil Cooler
| 25***80 | Lines Group-Hydraulic Oil Cooler | 1 |
| 25***60 | Bracket As | 1 |
| 27***64 | Manifold Group-Control; -Motor, 2-Speed | 1 |
258-2413 Lines Gp-Lift Cylinder
| 25***13 | Lines Group-Lift Cylinder | 1 |
| 25***02 | Manifold & Solenoid Group-Control; -Work Tool Positioner | 1 |
| 4P***34 | Clip-Ladder; (00800 mm ) | 1 |
258-3276 Lines Gp-Lowering Control -Manual
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 15***79 | Kit-Seal; (Relief Valve, Conveyor Cont) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
258-3242 Lines Gp-Pump
| 18***51 | Washer-Hard; (5.3x8.8x2-mm Thk) | 2 |
| 19***36 | Bolt-Socket Head; (M10x1.5x95-mm) | 4 |
| 21***77 | Seal-O-Ring | 1 |
258-3241 Lines Gp-Pump
| 24***81 | Flange | 2 |
| 24***12 | Kit-Seal; (Solenoid Valve) | 1 |
| 25***34 | Valve Group-Solenoid; (Hydraulic Backup Engaged Gear) | 1 |
258-2414 Lines Gp-Tilt Cylinder
| 18***51 | Washer-Hard; (5.3x8.8x2-mm Thk) | 2 |
| 19***36 | Bolt-Socket Head; (M10x1.5x95-mm) | 4 |
| 21***77 | Seal-O-Ring | 1 |
258-2420 Lines Gp-Work Tool
| 15***12 | Pin | 2 |
| 15***13 | Pin | 2 |
| 25***20 | Lines Group-Work Tool | 1 |
258-2423 Lines Gp-Work Tool -High Flow
| 15***13 | Plate | 1 |
| 15***41 | Pin | 2 |
| 15***42 | Pin | 2 |
258-3462 Manf & Solenoid Mtg Gp-Accum -Pilot Shutoff
| 15***41 | Pin | 2 |
| 15***42 | Pin | 2 |
| 25***62 | Manf & Solenoid Mtg Group-Accum; -Pilot Shutoff | 1 |
286-4887 Manifold & Lines Gp-Accum
| 25***64 | Pump Group-Gear | 1 |
| 27***60 | Washer-Hard; (15x22x2.5-mm Thk) | 4 |
| 27***14 | Kit-Seal; (Gear Pump) | 1 |
258-3152 Manifold & Lines Gp-Control -Motor, 2-Speed
| 25***52 | Manifold & Lines Group-Control; -Motor, 2-Speed | 1 |
| 25***20 | Pump Group-Gear | 1 |
| 27***60 | Washer-Hard; (15x22x2.5-mm Thk) | 4 |
258-3469 Manifold & Mtg Gp-Control -Work Tool Positioner
| 25***35 | Tank Group-Hydraulic | 1 |
| 25***47 | Bracket | 1 |
| 25***49 | Bracket As | 1 |
258-3463 Manifold & Mtg Gp-Control -Motor, 2-Speed
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 2 |
| 25***54 | Pump Group-Piston; -High Flow | 1 |
| 25***63 | Manifold & Mtg Group-Control; -Motor, 2-Speed | 1 |
258-2802 Manifold & Solenoid Gp-Control -Work Tool Positioner
| 13***45 | Pad; (Connector) | 1 |
| 14***37 | Cap As-Filler; (Hydraulic Tank) | 1 |
| 25***02 | Manifold & Solenoid Group-Control; -Work Tool Positioner | 1 |
274-8563 Manifold Gp-Control -Pilot Shutoff
| 25***04 | Strainer As; (Hydraulic Tank) | 1 |
| 26***90 | Gauge Group-Sight; (Hydraulic Tank) | 1 |
| 27***63 | Manifold Group-Control; -Pilot Shutoff | 1 |
274-8564 Manifold Gp-Control -Motor, 2-Speed
| 11***52 | Spacer; (13x25x22.14-mm Thk) | 2 |
| 23***25 | Stud; (M10x1.5-Thd) | 1 |
| 25***09 | Valve Group-Control | 1 |
291-0010 Manifold Gp-Control -Quick Coupler
| 29***10 | Manifold Group-Control; -Quick Coupler | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 6V***97 | Seal (Later Machines And Field Installed) | 1 |
258-2579 Motor & Mtg Gp-Hydraulic Fan
| 00***82 | Spring | 3 |
| 12***16 | Bolt-Shoulder | 1 |
| 14***31 | Valve-Check | 3 |
258-2513 Motor & Mtg Gp-Hydraulic Fan
| 11***52 | Spacer; (13x25x22.14-mm Thk) | 2 |
| 23***25 | Stud; (M10x1.5-Thd) | 1 |
| 25***08 | Valve Group-Control | 1 |
295-7300 Motor & Mtg Gp-Hydraulic Fan
| 18***54 | Valve Group-Solenoid; -Auxiliary | 6 |
| 19***00 | Valve Group-Solenoid; -12-Volt-Work Tool | 2 |
| 20***71 | Cap | 1 |
278-8720 Motor Gp-Gear -Hydraulic Fan
| 13***76 | Seal-O-Ring | 1 |
| 27***20 | Motor Group-Gear; -Hydraulic Fan | 1 |
258-2926 Motor Gp-Gear
| 11***61 | Seal Kit; (Includes Seals, Thrust Ring, Stem And Connectors) | 1 |
| 20***71 | Valve Group-Manual; (Coupler Pin, Lift Arm Lwr Cont) | 1 |
| 20***73 | Valve Group-Manual; (Coupler Pin, Lift Arm Lwr Cont) | 1 |
165-8731 Mounting Gp-Cylinder -Utility
| 16***31 | Mounting Group-Cylinder; -Utility | 1 |
| 20***71 | Kit-Seal; (Solenoid Valve) | 1 |
| 21***61 | Flange | 1 |
286-9248 Mounting Gp-Cylinder -Grapple Bucket
| 14***91 | Pin As | 2 |
| 14***94 | Pin | 1 |
| 19***92 | Spacer; (44.7x54.7x13.1-mm Thk) | 2 |
154-5011 Mounting Gp-Cylinder
| 12***98 | Seat | 1 |
| 12***99 | Seat | 1 |
| 13***49 | Connector | 1 |
156-0891 Mounting Gp-Cylinder -Industrial
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
| 21***73 | Nut; (1/2-28-Thd) | 1 |
258-3466 Pump & Mtg Gp-Gear
| 15***62 | Film-Information; (Tie-Down Location) | 2 |
| 18***33 | Step Group-Material Handling Arm | 1 |
| 21***50 | Arm As | 1 |
258-3522 Pump & Mtg Gp-Gear
| 25***22 | Pump & Mtg Group-Gear | 1 |
258-3523 Pump Gp-Piston & Gear -High Flow
| 25***23 | Pump Group-Piston & Gear; -High Flow | 1 |
258-2434 Tank & Mtg Gp-Hydraulic
| 15***77 | Edge | 1 |
| 25***34 | Tank & Mtg Group-Hydraulic | 1 |
258-2806 Tank Gp-Hydraulic
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***80 | Blade Group-Multipurpose Bucket | 1 |
| 16***89 | Tack-Fastener | 4 |
258-2435 Tank Gp-Hydraulic
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 25***35 | Tank Group-Hydraulic | 1 |
258-2505 Valve & Mtg Gp-Control
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 25***05 | Valve & Mtg Group-Control | 1 |
6e-4701 Valve Gp-Check -Pilot Oil
| 15***59 | Edge | 1 |
| 6E***01 | Valve Group-Check; -Pilot Oil | 1 |
336-1325 Valve Gp-Control
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 29***43 | Blade As | 1 |
336-1324 Valve Gp-Control -Lift Arm
| 19***16 | Edge | 1 |
| 33***24 | Valve Group-Control; -Lift Arm | 1 |
258-2508 Valve Gp-Control
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 25***08 | Valve Group-Control | 1 |
258-2509 Valve Gp-Control
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 25***09 | Valve Group-Control | 1 |
258-2504 Valve Gp-Control
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 25***04 | Valve Group-Control | 1 |
112-1817 Valve Gp-Manual -Lowering Control
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
295-1799 Valve Gp-Relief -Main
| 15***37 | Edge | 1 |
| 29***99 | Valve Group-Relief; -Main | 1 |
| 32***34 | Guard As; (60-In) | 1 |
211-3014 Valve Gp-Shuttle -High Flow
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 21***14 | Valve Group-Shuttle; -High Flow | 1 |
195-9700 Valve Gp-Solenoid -12-Volt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 19***00 | Valve Group-Solenoid; -12-Volt-Work Tool | 1 |
185-4254 Valve Gp-Solenoid
| 15***59 | Edge | 1 |
| 18***54 | Valve Group-Solenoid; -Auxiliary | 1 |
| 32***44 | Guard As; (66-In) | 1 |
Implements
258-2899 Pin & Link Gp-Lift Arm -With Support
| 15***77 | Edge | 1 |
| 25***99 | Pin & Link Group-Lift Arm; -With Support | 1 |
| 32***54 | Guard As; (72-In) | 1 |
Lubrication System
287-6016 Breather Gp
| 09***37 | Seal-O-Ring | 1 |
| 09***71 | Seal-O-Ring (Id=94.40mm) | 1 |
| 1R***34 | Filter-Engine Oil | 1 |
235-5897 Filter Gp-Engine Oil
| 10***44 | Nut | 1 |
| 10***83 | Seal-O-Ring | 1 |
| 11***41 | Pump As-Oil | 1 |
314-9901 Filter Gp-Engine Oil
| 10***25 | Valve As; (Oil Bypass)(Engine) | 1 |
| 23***96 | Gasket | 1 |
| 23***96 | Gasket | 1 |
287-5377 Lines Gp-Engine Oil
| 09***13 | Seal-O-Ring | 4 |
| 09***21 | Plug | 2 |
| 19***22 | Bolt As; (M8x1.25x22-mm) | 11 |
235-5895 Pump Gp-Engine Oil
| 09***13 | Seal-O-Ring | 4 |
| 09***21 | Plug | 2 |
| 19***35 | Bolt; (M8x1.25x22-mm) | 13 |
287-5665 Valve Gp-Engine Oil Relief
| 09***13 | Seal-O-Ring | 4 |
| 09***21 | Plug | 2 |
| 23***98 | Stud | 1 |
Machine Arrangement
258-2910 Chassis Ar
| 15***21 | Guide Group-Lines | 1 |
| 25***39 | Tank & Mtg Group-Fuel | 1 |
| 25***44 | Lines Group-Fuel Prm & Filter | 1 |
295-7296 Chassis Ar
295-7297 Common Ar
258-3297 Common Ar
342-5009 Control Ar-Machine -On, Off Auxiliary Control
342-5011 Control Ar-Machine -Aux Proportional Flow
342-5010 Control Ar-Machine -Aux Proportional Flow
258-3760 Machine Ar-Special
258-3759 Machine Ar-Special
320-8513 Machine Ar-Special
320-8507 Machine Ar-Special
320-8504 Machine Ar-Special
258-3756 Machine Ar-Special
365-1764 Option Ar-Machine -Dual Level Suspension, 1-Speed
365-1763 Option Ar-Machine
365-1762 Option Ar-Machine
Operator Station
258-4229 Accessory Gp-Cab
| 25***29 | Accessory Group-Cab | 1 |
| 26***62 | Control Group-Joystick; -Rh | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
176-3900 Accumulator Gp-Refrigerant -Uncharged
| 17***00 | Accumulator Group-Refrigerant; -With Desiccant | 1 |
| 26***63 | Control Group-Joystick; -Rh, High Flow | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
186-6190 Accumulator Gp-Refrigerant -Charged
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 9 |
| 18***90 | Accumulator Group-Refrigerant; -With Desiccant | 1 |
258-4261 Air Conditioner & Mounting Gp
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 7 |
258-4360 Air Conditioner Ar
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 2 |
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
258-4290 Air Conditioner Gp
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
258-4311 Armrest & Mounting Gp
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
269-0258 Base As-Joystick -Lh
| 13***39 | Nut; (U-Type Retainer) | 10 |
| 21***06 | Screw-Truss Head; (M6x1x16-mm) | 10 |
| 25***27 | Screw-Truss Head; (No 12x17.46-mm) | 6 |
269-0257 Base As-Joystick -Rh
| 25***69 | Cover | 1 |
| 25***27 | Screw-Truss Head; (No 12x17.46-mm) | 2 |
| 25***28 | Plate | 1 |
258-3741 Cab Ar-Enclosed Rops
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 2 |
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
258-4000 Cab Ar-Enclosed Rops
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 2 |
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
258-3743 Cab Ar-Enclosed Rops
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 2 |
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
258-3681 Cab Ar-Enclosed Rops
| 10***56 | Plug; (Switch) | 6 |
| 25***81 | Cab Ar-Enclosed Rops | 1 |
| 25***33 | Cover; (Cluster) | 1 |
276-0074 Cable Gp-Control
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
298-7198 Cable Gp-Control -Manual Lowering
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
258-2468 Compressor & Mtg Gp-Refrig
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
266-2430 Control & Wiring Gp-Air & Temp
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
258-4299 Control Gp-Air & Temperature
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
258-3405 Control Gp-Electrohydraulic -Rh
| 25***05 | Control Group-Electrohydraulic; -Rh | 1 |
| 28***14 | Handle | 1 |
| 29***37 | Nut | 1 |
258-3407 Control Gp-Electrohydraulic -Rh, High Flow
| 25***69 | Cover | 1 |
| 25***07 | Control Group-Electrohydraulic; -Rh, High Flow | 1 |
| 25***46 | Wiring Group-Heater | 1 |
258-3403 Control Gp-Electrohydraulic -Lh
| 14***71 | Louver As | 6 |
| 16***55 | Bolt; (M6x1x35-mm) | 2 |
| 20***85 | Bolt; (M8x1.25x35-mm) | 1 |
258-3404 Control Gp-Electrohydraulic -Lh, High Flow
| 15***80 | Washer-Hard; (22x38x6-mm Thk) | 8 |
| 25***04 | Control Group-Electrohydraulic; -Lh, High Flow | 1 |
| 25***89 | Mount | 4 |
258-3406 Control Gp-Electrohydraulic -Rh
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***56 | Plug; (Switch) | 1 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
272-1790 Control Gp-Handle -Lh
| 10***74 | Seal-Connector | 3 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
269-0265 Control Gp-Joystick -Lh, High Flow
| 00***10 | Elbow | 1 |
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 2 |
| 10***74 | Seal-Connector | 2 |
269-0262 Control Gp-Joystick -Rh
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
269-0263 Control Gp-Joystick -Rh, High Flow
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 16***72 | Speaker As-Radio | 2 |
| 17***37 | Connector; (Radio) | 1 |
269-0264 Control Gp-Joystick -Rh
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 16***72 | Speaker As-Radio | 2 |
| 17***37 | Connector; (Radio) | 1 |
269-0266 Control Gp-Joystick -Lh
| 12***70 | Screw-Machine; (M6x1x40-mm) | 3 |
| 17***91 | Nut-Spring | 3 |
| 25***79 | Knob As | 1 |
258-3268 Cover Gp-Cab
| 10***96 | Clip | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***11 | Support | 1 |
258-4314 Cover Gp-Console -Rh, Lh
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***15 | Connector | 1 |
258-4009 Cover Gp-Instrument Panel
258-4080 Door & Mtg Gp-Cab -With Cab Tilt Gas Spring
| 00***10 | Elbow | 1 |
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 2 |
| 10***74 | Seal-Connector | 2 |
258-4070 Door & Mtg Gp-Cab -With Cab Tilt Gas Spring
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***15 | Connector | 1 |
258-4440 Door & Mtg Gp-Cab -With Cab Tilt Gas Spring
| 25***85 | Window Group-Cab; -Side, Lh | 1 |
| 25***86 | Window Group-Cab; -Side, Rh | 1 |
| 25***40 | Door & Mtg Group-Cab; -With Cab Tilt Gas Spring | 1 |
258-4442 Door Gp-Cab
| 12***78 | Locknut; (M6x1-Thd) | 1 |
| 25***46 | Lever Group-Governor | 1 |
| 25***47 | Cable As | 1 |
258-4087 Door Gp-Cab -Polycarbonate
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 13***42 | Screw-Self-Tapping; (M5x2.3x18.8-mm) | 4 |
| 25***87 | Door Group-Cab; -Polycarbonate | 1 |
258-4086 Door Gp-Cab -Glass
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 25***86 | Door Group-Cab; -Glass | 1 |
| 26***33 | Switch As-Rocker; (Control Pattern Change) | 1 |
258-4252 Duct & Filter Gp-Cab Air
| 11***27 | Screw-Machine; (M6x1x30-mm) | 2 |
| 13***27 | Seal; (69-cm) | 0 |
| 17***22 | Seal; (230-cm Each) | 0 |
258-4400 Guard Gp-Rops/Fops -Kit
| 11***27 | Screw-Machine; (M6x1x30-mm) | 2 |
| 13***27 | Seal; (69-cm) | 0 |
| 17***22 | Seal; (230-cm Each) | 0 |
298-7197 Handle Gp
| 25***27 | Screw-Truss Head; (No 12x17.46-mm) | 6 |
| 25***25 | Liner As | 1 |
| 25***26 | Cover As | 1 |
258-4251 Heater & Mtg Gp-Cab
| 10***96 | Clip | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***11 | Support | 1 |
258-4350 Heater Ar-Cab
| 00***10 | Elbow | 1 |
| 13***53 | Hose; (192.5cm) (X2) | 0 |
| 17***20 | Strap-Dual Clamp | 3 |
258-4270 Heater Gp-Cab
| 25***70 | Heater Group-Cab | 1 |
| 28***70 | Mirror As; (Rear View) | 1 |
| 3B***05 | Washer,Lock Tube Assembly Mounting; Used On Engine P/N 5r698 | 1 |
258-4066 Installation Gp-Radio
| 21***84 | Mirror As | 1 |
| 25***66 | Installation Group-Radio | 1 |
| 3B***05 | Washer,Lock Tube Assembly Mounting; Used On Engine P/N 5r698 | 1 |
337-3991 Installation Gp-Radio -Kit
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
| 26***23 | Cap-Wiper | 1 |
350-9036 Kit-Air Cond & Heater Instl
| 13***40 | Locknut; (M8x1.25-Thd) | 2 |
| 21***52 | Screw-Truss Head; (M8x1.25x30-mm) | 2 |
| 25***22 | Bracket As-Mounting; (Front) | 1 |
280-6079 Kit-Air Cond & Heater Instl
| 13***40 | Locknut; (M8x1.25-Thd) | 2 |
| 21***52 | Screw-Truss Head; (M8x1.25x30-mm) | 2 |
| 25***21 | Bracket As-Mounting; (Front) | 1 |
305-8044 Kit-Air Conditioner Breather
| 09***65 | Spacer; (17x40x3-mm Thk) | 2 |
| 16***95 | Washer; (16.5x71.5x3-mm Thk) | 4 |
| 19***37 | Insert-Threaded; (M8x1.25-Thd) | 1 |
280-6081 Kit-Air Conditioner Instl -Conversion
| 08***77 | Lamp Group-Dome; (12-Volt) | 1 |
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 74 |
| 09***34 | Terminal-Blade; (18-Ga To 22-Ga) | 4 |
350-9037 Kit-Air Conditioner Instl
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 13***42 | Screw-Self-Tapping; (M5x2.3x18.8-mm) | 4 |
| 26***20 | Switch As-Rocker; (Creeper Control) | 1 |
280-6084 Kit-Cab Door & Mounting -Polycarbonate
| 25***73 | Cable As; (Hand Control) | 1 |
| 28***84 | Kit-Cab Door & Mounting; -Polycarbonate | 1 |
| 2R***64 | Ring-Retaining | 1 |
258-2473 Kit-Cab Door & Mounting -Glass
| 25***73 | Kit-Cab Door & Mounting; -Glass | 1 |
| 25***44 | Cable As; (Low Idle) | 1 |
| 25***73 | Cable As; (Hand Control) | 1 |
258-4443 Kit-Cab Door & Mounting
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 4 |
| 12***78 | Locknut; (M6x1-Thd) | 1 |
| 16***54 | Kit-Service; (Pedal) | 1 |
280-6077 Kit-Cab Heater & Mounting
| 19***54 | Sleeve | 1 |
| 28***77 | Kit-Cab Heater & Mounting | 1 |
258-2472 Kit-Cab Window -Side
| 19***54 | Sleeve | 1 |
| 25***72 | Kit-Cab Window; -Side | 1 |
258-4110 Kit-Control Pattern Change -Selectable
| 13***90 | Bushing; (Radio Mount) | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 17***37 | Connector; (Radio) | 1 |
292-7927 Kit-Control Pattern Change -Dedicated
| 13***90 | Bushing; (Radio Mount) | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 17***37 | Connector; (Radio) | 1 |
258-4111 Kit-Instrument Panel -Includes Creeper Control, Rh
| 19***54 | Sleeve | 1 |
| 25***11 | Kit-Instrument Panel; -Includes Creeper Control, Rh | 1 |
327-8941 Lever Gp-Governor
| 25***55 | Seat Group-Suspension; -Air | 1 |
| 25***11 | Armrest & Mounting Group | 1 |
| 32***41 | Lever Group-Governor | 1 |
258-4045 Lever Gp-Governor
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 16***72 | Speaker As-Radio | 2 |
| 17***37 | Connector; (Radio) | 1 |
258-4020 Liner Gp-Cab
| 25***20 | Liner Group-Cab | 1 |
| 25***54 | Seat Group-Suspension; -Mechanical | 1 |
| 25***11 | Armrest & Mounting Group | 1 |
258-4433 Liner Gp-Cab
| 15***83 | Washer-Hard; (8.4x35x2.5-mm Thk) | 4 |
| 25***01 | Seat & Armrest Group | 1 |
| 25***33 | Liner Group-Cab | 1 |
258-4266 Lines Gp-Air Conditioner
| 25***51 | Seat & Mounting Group; -Suspension | 1 |
| 25***66 | Lines Group-Air Conditioner | 1 |
| 25***14 | Cover Group-Console; -Rh, Lh | 1 |
258-4300 Lines Gp-Heater
| 25***52 | Seat & Mounting Group | 1 |
| 25***00 | Lines Group-Heater | 1 |
| 25***14 | Cover Group-Console; -Rh, Lh | 1 |
6v-1970 Literature Gp
| 2D***12 | Washer; (7/16x15/16x1/4-In Thk) | 2 |
| 6V***70 | Literature Group; (Literature Compartment) | 1 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 2 |
305-8034 Mirror Gp-Rear View
| 09***68 | Washer; (5x16x1.2-mm Thk) | 2 |
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 2 |
| 13***90 | Bolt-Carriage; (M8x1.25x30-mm) | 2 |
258-4230 Mirror Gp-Rear View
| 25***30 | Mirror Group-Rear View | 1 |
| 2D***12 | Washer; (7/16x15/16x1/4-In Thk) | 2 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 2 |
330-5011 Motor Gp-Window Wiper
| 09***68 | Washer; (5x16x1.2-mm Thk) | 2 |
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 2 |
| 13***90 | Bolt-Carriage; (M8x1.25x30-mm) | 2 |
295-3171 Mounting Gp-Armrest -Lh
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 4 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
295-3172 Mounting Gp-Armrest -Rh
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 4 |
| 1P***10 | Washer; (0.391x0.812x0.067-In Thk) | 4 |
| 27***13 | Seat Group; -Cloth, Suspension | 1 |
258-4220 Mounting Gp-Rops -Includes Step
| 09***25 | Pin-Clevis | 1 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 2 |
| 15***82 | Spring-Gas; (Non-Locking) | 1 |
258-4163 Panel Gp-Instrument -Rh
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 2 |
| 09***78 | Pin-Spring | 1 |
| 14***08 | Fastener | 13 |
258-4162 Panel Gp-Instrument
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***11 | Screw-Machine; (3/8-16x0.75-In) | 1 |
325-8383 Pedal Gp-Governor
| 25***83 | Window As; (Lh Front Sliding Glass) | 1 |
| 25***84 | Window As; (Lh Rear Sliding Glass) | 1 |
| 25***65 | Latch As | 1 |
327-8937 Pedal Gp-Governor
| 25***82 | Frame As; (Rh) | 1 |
| 25***65 | Latch As | 1 |
| 25***76 | Catch As; (Inner) | 1 |
258-4042 Pedal Gp-Governor
| 1D***77 | Bolt-Round Head; (3/8-16x1-In) | 2 |
| 25***42 | Pedal Group-Governor | 1 |
| 5T***69 | Clamp | 2 |
337-3992 Radio Gp -Am/Fm
| 12***59 | Clamp-Hose | 2 |
| 12***71 | Clamp-Hose | 1 |
| 18***07 | Clamp-Hose | 1 |
331-5291 Radio Gp -Am/Fm/Wb/Cd Player
| 25***31 | Film-Identification; (High Flow Xps) | 2 |
| 33***91 | Radio Group; -Am/Fm/Wb/Cd Player | 1 |
241-4936 Radio Gp -Am/Fm/Wb/Cd Player
| 24***36 | Radio Group; -Am/Fm/Wb/Cd Player | 1 |
| 25***85 | Window Group-Cab; -Side, Lh | 1 |
| 25***86 | Window Group-Cab; -Side, Rh | 1 |
288-1744 Radio Gp -Am/Fm/Wb/Cd Player
| 25***21 | Film-Identification; (297c, Lh) | 1 |
| 25***22 | Film-Identification; (297c, Rh) | 1 |
| 25***23 | Film-Identification; (Caterpillar) | 1 |
331-5292 Radio Gp -Am, Fm
| 29***10 | Film-Identification; (Two Speed) | 2 |
| 33***92 | Radio Group; -Am/Fm/Wb | 1 |
200-5729 Radio Gp -Am/Fm/Wb
| 10***57 | Strip; (Locking) (275cm) | 0 |
| 10***56 | Seal; (275cm) | 0 |
| 20***29 | Radio Group; -Am/Fm/Wb | 1 |
258-4402 Seat & Armrest Gp -Suspension
| 15***53 | Film-Information; (Read Omm) | 1 |
| 16***76 | Film; (Identification) (12v) (On Rear Console Behind Operators Seat) | 1 |
| 21***02 | Film-Warning; (No Weld, No Drill, Read Omm) | 1 |
258-4401 Seat & Armrest Gp
| 15***53 | Film-Information; (Read Omm) | 1 |
| 16***76 | Film; (Identification) (12v) (On Rear Console Behind Operators Seat) | 1 |
| 21***02 | Film-Warning; (No Weld, No Drill, Read Omm) | 1 |
258-4052 Seat & Mounting Gp
| 15***53 | Film-Information; (Read Omm) | 1 |
| 16***76 | Film; (Identification) (12v) (On Rear Console Behind Operators Seat) | 1 |
| 21***02 | Film-Warning; (No Weld, No Drill, Read Omm) | 1 |
258-4051 Seat & Mounting Gp -Suspension
| 15***53 | Film-Information; (Read Omm) | 1 |
| 16***76 | Film; (Identification) (12v) (On Rear Console Behind Operators Seat) | 1 |
| 21***02 | Film-Warning; (No Weld, No Drill, Read Omm) | 1 |
258-4320 Seat Ar-Suspension -Mechanical
| 16***89 | Tack-Fastener | 4 |
| 22***69 | Film-Warning; (Do Not Operate, Read Omm) | 1 |
| 24***18 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
258-4330 Seat Ar-Suspension -Air
| 19***10 | Film-Identification; (Synthetic Hydraulic Oil, Read Omm) | 2 |
| 25***30 | Seat Ar-Suspension; -Air | 1 |
258-4096 Seat Belt Gp -Retractable
| 25***96 | Seat Belt Group; -Retractable | 1 |
258-4095 Seat Belt Gp -Retractable
| 25***95 | Seat Belt Group; -Retractable | 1 |
273-5913 Seat Gp -Cloth, Suspension
| 27***13 | Seat Group; -Cloth, Suspension | 1 |
305-7096 Seat Gp -Vinyl
| 30***96 | Seat Group; -Vinyl | 1 |
258-4055 Seat Gp-Suspension -Air
| 25***55 | Seat Group-Suspension; -Air | 1 |
258-4054 Seat Gp-Suspension -Mechanical
| 25***54 | Seat Group-Suspension; -Mechanical | 1 |
258-4017 Spring Gp-Gas -Includes Lift Handle
| 25***17 | Spring Group-Gas; -Includes Lift Handle | 1 |
273-9611 Suspension Gp-Seat -Mechanical
| 27***11 | Suspension Group-Seat; -Mechanical | 1 |
273-5914 Suspension Gp-Seat -Air
| 27***14 | Suspension Group-Seat; -Air | 1 |
258-3497 Visor Gp-Cab
| 25***97 | Visor Group-Cab | 1 |
258-4233 Visor Gp-Cab -Lh
| 25***33 | Visor Group-Cab; -Lh | 1 |
258-4010 Window Gp-Cab
| 25***10 | Window Group-Cab | 1 |
258-4090 Window Gp-Cab -Side
| 25***90 | Window Group-Cab; -Side | 1 |
258-3286 Window Gp-Cab -Side, Rh
| 25***86 | Window Group-Cab; -Side, Rh | 1 |
258-3285 Window Gp-Cab -Side, Lh
| 25***85 | Window Group-Cab; -Side, Lh | 1 |
Power Train
309-3262 Drive Gp-Track -2-Speed, Rh
| 10***93 | Poppet | 1 |
| 14***27 | Connector Group | 2 |
| 14***62 | Elbow Group | 1 |
258-3081 Drive Gp-Track -Lh
| 13***04 | Switch As-Pressure; (Power Train Oil Filter Bypass) | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
| 25***81 | Drive Group-Track; -Lh | 1 |
309-3261 Drive Gp-Track -1-Speed, Lh
| 17***87 | Connector As | 1 |
| 1F***67 | Clip 7t***28 Cable As To Fan Shroud | 2 |
| 25***61 | Tube As | 1 |
309-3260 Drive Gp-Track -1-Speed, Rh
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***21 | Connector | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 4 |
309-3263 Drive Gp-Track -2-Speed, Lh
| 10***93 | Poppet | 1 |
| 14***27 | Connector Group | 2 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 1 |
258-3080 Drive Gp-Track -Rh
| 14***82 | Elbow As | 2 |
| 17***20 | Strap-Dual Clamp | 1 |
| 19***40 | Connector As | 1 |
258-3077 Drive Gp-Track -2-Speed, Lh
| 21***32 | Nut-Jam; (1/4-7-Thd) | 1 |
| 25***71 | Motor Group-Piston; -2-Speed | 1 |
| 25***77 | Drive Group-Track; -2-Speed, Lh | 1 |
258-3076 Drive Gp-Track -2-Speed, Rh
| 21***32 | Nut-Jam; (1/4-7-Thd) | 1 |
| 25***71 | Motor Group-Piston; -2-Speed | 1 |
| 25***76 | Drive Group-Track; -2-Speed, Rh | 1 |
258-2581 Filter & Lines Gp-Hydraulic
| 25***81 | Filter & Lines Group-Hydraulic | 1 |
| 27***23 | Kit-Cover | 1 |
| 27***24 | Kit-Gear | 1 |
223-9974 Filter Gp-Oil -Hydraulic
| 22***74 | Filter Group-Oil; -Hydraulic | 1 |
| 27***23 | Kit-Cover | 1 |
| 27***24 | Kit-Gear | 1 |
258-2432 Lines Gp-Hydrostatic
| 23***29 | Spacer; (85.7x12.7-mm Thk) | 2 |
| 23***30 | Spacer; (63.5x88.9x8-mm Thk) | 2 |
| 25***32 | Lines Group-Hydrostatic | 1 |
258-3860 Lines Gp-Parking Brake
| 22***35 | Flange | 1 |
| 25***19 | Plate-Adapter | 1 |
| 25***60 | Lines Group-Parking Brake | 1 |
258-2589 Manifold Gp-Return
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 2 |
| 25***54 | Pump Group-Piston; -High Flow | 1 |
| 25***89 | Manifold Group-Return | 1 |
258-2970 Motor Gp-Piston -1-Speed
| 25***70 | Motor Group-Piston; -1-Speed | 1 |
| 27***36 | Kit-Seal; (Piston Pump) | 1 |
| 27***37 | Valve Group-Pump Control | 2 |
258-2971 Motor Gp-Piston -2-Speed
| 11***04 | Bolt-Socket Head; (M12x1.75x45-mm) | 4 |
| 23***86 | Kit-Bearing; (Generator Pump) | 1 |
| 23***87 | Kit-Bearing; (Generator Pump) | 1 |
258-3010 Mounting Gp-Axle
| 1K***72 | Locknut Horn To Guard | 12 |
| 25***10 | Mounting Group-Axle | 1 |
| 25***84 | Ring; (Middle) | 1 |
258-3467 Mounting Gp-Pump
| 25***62 | Muffler & Mounting Group | 1 |
| 25***79 | Motor & Mtg Group-Hydraulic Fan | 1 |
| 25***67 | Mounting Group-Pump | 1 |
258-3318 Mounting Gp-Pump
| 25***62 | Muffler & Mounting Group | 1 |
| 25***79 | Motor & Mtg Group-Hydraulic Fan | 1 |
| 25***18 | Mounting Group-Pump | 1 |
258-2407 Pump & Mtg Gp-Hydrostatic
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 25***07 | Pump & Mtg Group-Hydrostatic | 1 |
258-2405 Pump Gp-Piston -Hydrostatic
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 25***05 | Pump Group-Piston; -Hydrostatic | 1 |
258-2554 Pump Gp-Piston -High Flow
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 25***62 | Muffler & Mounting Group | 1 |
258-3090 Sprocket Gp
| 17***16 | Chock | 1 |
| 25***90 | Sprocket Group | 1 |
| 25***33 | Film-Notice; (Steering) | 1 |
Service Equipment And Supplies
280-8329 Bracket Gp-Mounting -Belt Guard
| 28***29 | Bracket Group-Mounting; -Belt Guard | 1 |
289-0848 Film Gp -2-Speed
| 28***48 | Film Group; -2-Speed | 1 |
258-3230 Film Gp -High Flow Xps
| 25***30 | Film Group; -High Flow Xps | 1 |
258-3196 Film Gp
| 25***96 | Film Group | 1 |
348-6735 Kit-Muffler
| 34***35 | Kit-Muffler | 1 |
258-3224 Plate & Film Gp
| 25***24 | Plate & Film Group | 1 |
258-3228 Plate & Film Gp
| 25***28 | Plate & Film Group | 1 |
286-9251 Plate & Film Gp
| 28***51 | Plate & Film Group | 1 |
304-5237 Plate & Film Gp
| 30***37 | Plate & Film Group | 1 |
Undercarriage
258-3021 Axle Gp-Bogie -Single Level Suspension
258-3031 Axle Gp-Idler
327-7724 Axle Gp-Idler
258-3600 Axle Gp-Undercarriage
258-3601 Axle Gp-Undercarriage
327-7722 Frame Gp-Track Roller
258-3071 Frame Gp-Undercarriage
258-3070 Frame Gp-Undercarriage
258-3072 Frame Gp-Undercarriage -Single Level Suspension, Lh
309-3270 Frame Gp-Undercarriage -Single Level Suspension, Rh
320-8471 Frame Gp-Undercarriage
| 12***09 | Bolt-Socket Head; (M8x1.25x12-mm) | 1 |
| 15***37 | Elbow Group | 2 |
| 15***49 | Connector As. | 1 |
258-3073 Frame Gp-Undercarriage -Dual Level Suspension, Lh
309-3271 Frame Gp-Undercarriage -Dual Level Suspension, Rh
309-3272 Frame Gp-Undercarriage -Single Level Suspension,Lh
320-8470 Frame Gp-Undercarriage
| 12***09 | Bolt-Socket Head; (M8x1.25x12-mm) | 1 |
| 15***37 | Elbow Group | 2 |
| 15***49 | Connector As. | 1 |
309-3273 Frame Gp-Undercarriage -Dual Level Suspension, Lh
| 25***01 | Undercarriage Ar; -Single Level Suspension, Rh | 1 |
| 25***02 | Undercarriage Ar; -Single Level Suspension, Lh | 1 |
| 30***73 | Frame Group-Undercarriage; -Dual Level Suspension, Lh | 1 |
320-8515 Suspension Gp-Bogie -Dual Level Suspension
| 25***01 | Undercarriage Ar; -Dual Level Suspension, 2-Speed, Rh | 1 |
| 25***02 | Undercarriage Ar; -Dual Level Suspension, 2-Speed, Lh | 1 |
| 32***15 | Suspension Group-Bogie; -Dual Level Suspension | 1 |
258-3140 Suspension Gp-Bogie -Dual Level Suspension
| 12***09 | Bolt-Socket Head; (M8x1.25x12-mm) | 1 |
| 15***37 | Elbow Group | 2 |
| 15***49 | Connector As. | 1 |
258-3001 Undercarriage Ar -Dual Level Suspension, Rh
| 15***37 | Elbow Group | 2 |
| 25***01 | Undercarriage Ar; -Dual Level Suspension, Rh | 1 |
| 25***78 | Pin | 1 |
309-3251 Undercarriage Ar -Single Level Suspension, 1-Speed, Rh
| 15***37 | Elbow Group | 2 |
| 25***78 | Pin | 1 |
| 25***09 | Retainer | 1 |
320-8502 Undercarriage Ar
| 25***21 | Axle Group-Bogie; -Single Level Suspension | 1 |
| 25***28 | Bolt-Socket Head; (3/8-16x1.125-In) | 12 |
| 30***98 | Wheel-Bogie; (Inner) | 1 |
258-2901 Undercarriage Ar -Single Level Suspension, Rh
| 12***09 | Bolt-Socket Head; (M8x1.25x12-mm) | 1 |
| 15***37 | Elbow Group | 2 |
| 15***49 | Connector As. | 2 |
309-3252 Undercarriage Ar -Single Level Suspension, 1-Speed, Lh
| 12***09 | Bolt-Socket Head; (M8x1.25x12-mm) | 1 |
| 15***37 | Elbow Group | 2 |
| 15***49 | Connector As. | 2 |
364-3925 Undercarriage Ar -Dual Level Suspension, 2-Speed
| 16***13 | Kit-Seal | 1 |
| 36***25 | Undercarriage Ar; -Dual Level Suspension, 2-Speed | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
309-3302 Undercarriage Ar -Dual Level Suspension, 1-Speed, Lh
| 15***37 | Elbow Group | 2 |
| 25***78 | Pin | 1 |
| 25***09 | Retainer | 1 |
258-3701 Undercarriage Ar -Dual Level Suspension, 2-Speed, Rh
| 25***01 | Undercarriage Ar; -Dual Level Suspension, 2-Speed, Rh | 1 |
| 30***01 | Undercarriage Ar; -Dual Level Suspension, 1-Speed, Rh | 1 |
| 30***02 | Undercarriage Ar; -Dual Level Suspension, 1-Speed, Lh | 1 |
309-3400 Undercarriage Ar -Dual Level Suspension, 2-Speed
| 30***00 | Undercarriage Ar; -Dual Level Suspension, 2-Speed | 1 |
| 32***11 | Undercarriage Ar | 1 |
| 32***12 | Undercarriage Ar | 1 |
309-3402 Undercarriage Ar -Dual Level Suspension, 2-Speed, Lh
| 15***37 | Elbow Group | 2 |
| 25***78 | Pin | 1 |
| 25***09 | Retainer | 1 |
309-3301 Undercarriage Ar -Dual Level Suspension, 1-Speed, Rh
| 30***01 | Undercarriage Ar; -Dual Level Suspension, 1-Speed, Rh | 1 |
| 32***01 | Undercarriage Ar | 1 |
| 32***02 | Undercarriage Ar | 1 |
258-3002 Undercarriage Ar -Dual Level Suspension, Lh
| 12***09 | Bolt-Socket Head; (M8x1.25x12-mm) | 1 |
| 15***37 | Elbow Group | 2 |
| 15***49 | Connector As. | 1 |
320-8520 Undercarriage Ar
| 30***96 | Wheel-Idler; (Inner, Rubber) | 1 |
| 30***97 | Wheel-Idler; (Outer, Rubber) | 1 |
| 32***20 | Undercarriage Ar | 1 |
258-2902 Undercarriage Ar -Single Level Suspension, Lh
| 25***02 | Undercarriage Ar; -Single Level Suspension, Lh | 1 |
| 30***51 | Undercarriage Ar; -Single Level Suspension, 1-Speed, Rh | 1 |
| 30***52 | Undercarriage Ar; -Single Level Suspension, 1-Speed, Lh | 1 |
258-3700 Undercarriage Ar -Dual Level Suspension, 2-Speed
| 12***09 | Bolt-Socket Head; (M8x1.25x12-mm) | 1 |
| 15***37 | Elbow Group | 2 |
| 15***49 | Connector As. | 1 |
320-8501 Undercarriage Ar
| 15***37 | Elbow Group | 2 |
| 25***78 | Pin | 1 |
| 25***09 | Retainer | 1 |
309-3401 Undercarriage Ar -Dual Level Suspension, 2-Speed, Rh
| 15***37 | Elbow Group | 2 |
| 25***78 | Pin | 1 |
| 25***09 | Retainer | 1 |
309-3250 Undercarriage Ar -Single Level Suspension, 1 Speed
| 12***09 | Bolt-Socket Head; (M8x1.25x12-mm) | 1 |
| 15***37 | Elbow Group | 2 |
| 15***49 | Connector As. | 1 |
320-8511 Undercarriage Ar
| 25***31 | Axle Group-Idler | 1 |
| 25***52 | Wheel-Idler; (Outer, Steel) | 1 |
| 25***53 | Wheel-Idler; (Inner, Steel) | 1 |
320-8510 Undercarriage Ar
| 25***31 | Axle Group-Idler | 1 |
| 30***96 | Wheel-Idler; (Inner, Rubber) | 1 |
| 30***97 | Wheel-Idler; (Outer, Rubber) | 1 |
258-3702 Undercarriage Ar -Dual Level Suspension, 2-Speed, Lh
| 15***37 | Elbow Group | 2 |
| 25***78 | Pin | 1 |
| 25***09 | Retainer | 1 |
258-2900 Undercarriage Ar -Single Level Suspension, 1-Speed
| 12***09 | Bolt-Socket Head; (M8x1.25x12-mm) | 1 |
| 15***37 | Elbow Group | 2 |
| 15***49 | Connector As. | 2 |
309-3300 Undercarriage Ar -Dual Level Suspension, 1-Speed
| 15***37 | Elbow Group | 2 |
| 25***78 | Pin | 1 |
| 25***09 | Retainer | 1 |
258-3000 Undercarriage Ar -Dual Level Suspension, 1-Speed
| 12***09 | Bolt-Socket Head; (M8x1.25x12-mm) | 1 |
| 15***37 | Elbow Group | 2 |
| 15***49 | Connector As. | 1 |
320-8521 Undercarriage Ar
| 32***21 | Undercarriage Ar | 1 |
320-8522 Undercarriage Ar
| 32***22 | Undercarriage Ar | 1 |
320-8512 Undercarriage Ar
| 25***52 | Wheel-Idler; (Outer, Steel) | 1 |
| 25***53 | Wheel-Idler; (Inner, Steel) | 1 |
| 32***12 | Undercarriage Ar | 1 |
320-8500 Undercarriage Ar
| 15***37 | Elbow Group | 2 |
| 25***78 | Pin | 1 |
| 25***09 | Retainer | 1 |
258-3020 Wheel Gp-Bogie -Single Level Suspension
| 25***20 | Wheel Group-Bogie; -Single Level Suspension | 1 |
| 26***41 | Kit-Seal | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
327-7726 Wheel Gp-Idler -Steel
| 25***97 | Bearing-Sleeve | 1 |
| 25***42 | Bearing-Sleeve | 1 |
| 27***70 | Kit-Seal; (Hydraulic Cylinder) | 1 |
258-3030 Wheel Gp-Idler -Single Level Suspension, Rh
| 17***85 | Kit-Seal | 1 |
| 25***30 | Wheel Group-Idler; -Single Level Suspension, Rh | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
327-7727 Wheel Gp-Idler -Rubber
| 32***27 | Wheel Group-Idler; -Rubber | 1 |
320-8530 Wheel Gp-Idler
| 25***97 | Bearing-Sleeve | 1 |
| 28***91 | Kit-Seal | 1 |
| 2K***21 | Locknut (5/8-18 Thd) | 1 |
Work Tools
216-8756 Arm Gp-Material Handling
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 21***56 | Arm Group-Material Handling | 1 |
275-5427 Bar As-Tooth
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***27 | Bar As-Tooth | 1 |
264-2084 Bar As-Tooth
| 19***16 | Edge | 1 |
| 26***84 | Bar As-Tooth | 1 |
| 32***64 | Guard As; (78-In) | 1 |
154-5080 Blade Gp-Multipurpose Bucket
| 15***80 | Blade Group-Multipurpose Bucket | 1 |
| 29***44 | Edge | 1 |
| 32***74 | Guard As; (84-In) | 1 |
325-7068 Blade Gp-Multipurpose Bucket
| 28***01 | Bucket Ar-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
| 32***68 | Blade Group-Multipurpose Bucket | 1 |
279-5388 Blade Gp-Multipurpose Bucket
| 13***84 | Edge Group-Cutting | 1 |
| 27***64 | Bucket As-General Purpose | 1 |
| 27***88 | Blade Group-Multipurpose Bucket | 1 |
293-0142 Blade Gp-Multipurpose Bucket
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
159-5347 Blade Gp-Multipurpose Bucket
| 13***83 | Edge Group-Cutting | 1 |
| 15***47 | Blade Group-Multipurpose Bucket | 1 |
| 27***34 | Bucket As-Dirt | 1 |
159-5345 Blade Gp-Multipurpose Bucket
| 13***87 | Edge Group-Cutting | 1 |
| 15***45 | Blade Group-Multipurpose Bucket | 1 |
| 26***84 | Bucket Group-Dirt | 1 |
325-7038 Blade Gp-Multipurpose Bucket
| 13***87 | Edge Group-Cutting | 1 |
| 27***76 | Bucket As-General Purpose | 1 |
| 32***38 | Blade Group-Multipurpose Bucket, Protective Cover | 1 |
279-5387 Blade Gp-Multipurpose Bucket
| 13***86 | Edge Group-Cutting | 1 |
| 27***87 | Blade Group-Multipurpose Bucket | 1 |
| 28***89 | Bucket As-Dirt | 1 |
325-7059 Blade Gp-Multipurpose Bucket
| 28***00 | Bucket Ar-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
| 32***59 | Blade Group-Multipurpose Bucket | 1 |
325-7049 Blade Gp-Multipurpose Bucket
| 28***99 | Bucket Group-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
| 32***49 | Blade Group-Multipurpose Bucket | 1 |
325-7058 Blade Gp-Multipurpose Bucket
| 28***02 | Bucket Group-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
| 32***58 | Blade Group-Multipurpose Bucket | 1 |
279-5385 Blade Gp-Multipurpose Bucket
| 13***85 | Edge Group-Cutting | 1 |
| 27***85 | Blade Group-Multipurpose Bucket | 1 |
| 27***40 | Bucket As-Dirt | 1 |
325-7078 Blade Gp-Multipurpose Bucket
| 28***44 | Bucket Group-Grapple | 1 |
| 28***48 | Mounting Group-Cylinder; -Grapple Bucket | 1 |
| 28***50 | Lines Group-Grapple | 1 |
279-5396 Blade Gp-Multipurpose Bucket
| 13***85 | Edge Group-Cutting | 1 |
| 27***68 | Bucket As-General Purpose | 1 |
| 27***96 | Blade Group-Multipurpose Bucket | 1 |
325-7039 Blade Gp-Multipurpose Bucket
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 9 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
325-7048 Blade Gp-Multipurpose Bucket
| 19***24 | Edge Group-Cutting | 1 |
| 29***70 | Bucket As-General Purpose; -High Capacity | 1 |
| 32***48 | Blade Group-Multipurpose Bucket | 1 |
279-5395 Blade Gp-Multipurpose Bucket
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
279-5406 Blade Gp-Multipurpose Bucket
| 13***86 | Edge Group-Cutting | 1 |
| 27***72 | Bucket As-General Purpose | 1 |
| 27***06 | Blade Group-Multipurpose Bucket | 1 |
279-5405 Blade Gp-Multipurpose Bucket
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
325-7069 Blade Gp-Multipurpose Bucket
| 28***48 | Mounting Group-Cylinder; -Grapple Bucket | 1 |
| 28***51 | Plate & Film Group | 1 |
| 28***78 | Bucket Group-Grapple | 1 |
325-7079 Blade Gp-Multipurpose Bucket
| 13***86 | Edge Group-Cutting | 1 |
| 27***21 | Bucket As-Light Material | 1 |
| 32***79 | Blade Group-Multipurpose Bucket | 1 |
279-5384 Blade Gp-Multipurpose Bucket
| 13***84 | Edge Group-Cutting | 1 |
| 27***84 | Blade Group-Multipurpose Bucket | 1 |
| 27***37 | Bucket As-Dirt | 1 |
268-4083 Bucket Ar-Dirt
| 13***87 | Edge Group-Cutting | 1 |
| 26***83 | Bucket Ar-Dirt | 1 |
| 27***24 | Bucket As-Light Material | 1 |
279-5435 Bucket Ar-Dirt
| 19***24 | Edge Group-Cutting | 1 |
| 27***29 | Bucket As-Light Material | 1 |
| 27***35 | Bucket Ar-Dirt | 1 |
285-6090 Bucket Ar-Dirt
| 15***09 | Bucket Group-Multipurpose | 1 |
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
279-5438 Bucket Ar-Dirt
| 27***38 | Bucket Ar-Dirt | 1 |
| 29***23 | Bucket As-Light Material, Wheel Disc | 1 |
| 29***80 | Edge Group-Cutting | 1 |
279-5441 Bucket Ar-Dirt
| 15***05 | Bucket Group-Multipurpose | 1 |
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
279-5365 Bucket Ar-General Purpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
296-8192 Bucket Ar-General Purpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
279-5378 Bucket Ar-General Purpose
| 13***86 | Edge Group-Cutting | 1 |
| 27***78 | Bucket Ar-General Purpose | 1 |
| 27***98 | Bucket Ar-Multipurpose | 1 |
279-5369 Bucket Ar-General Purpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
| 16***36 | Cover Group-Lines | 1 |
279-5374 Bucket Ar-General Purpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
279-5377 Bucket Ar-General Purpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
| 16***36 | Cover Group-Lines | 1 |
279-5370 Bucket Ar-General Purpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
| 16***36 | Cover Group-Lines | 1 |
279-5373 Bucket Ar-General Purpose
| 13***85 | Edge Group-Cutting | 1 |
| 27***73 | Bucket Ar-General Purpose | 1 |
| 27***90 | Bucket Ar-Multipurpose | 1 |
279-5366 Bucket Ar-General Purpose
| 13***84 | Edge Group-Cutting | 1 |
| 27***66 | Bucket Ar-General Purpose | 1 |
| 27***82 | Bucket Ar-Multipurpose | 1 |
285-6112 Bucket Ar-Grapple
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
| 16***36 | Cover Group-Lines | 1 |
286-9301 Bucket Ar-Grapple
| 19***24 | Edge Group-Cutting | 1 |
| 28***01 | Bucket Ar-Grapple | 1 |
| 29***39 | Engine; - Assembly, Bucket Ar-Multipurpose | 1 |
285-6111 Bucket Ar-Grapple
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
| 16***36 | Cover Group-Lines | 1 |
286-9300 Bucket Ar-Grapple
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 9 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
285-6104 Bucket Ar-Grapple
| 13***87 | Edge Group-Cutting | 1 |
| 27***03 | Bucket Ar-Multipurpose | 1 |
| 28***04 | Bucket Ar-Grapple | 1 |
285-6093 Bucket Ar-Grapple
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 9 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
296-7597 Bucket Ar-Light Material
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
279-5430 Bucket Ar-Light Material
| 13***84 | Edge Group-Cutting | 1 |
| 27***30 | Bucket Ar-Light Material | 1 |
| 32***36 | Bucket Ar-Multipurpose, Protective Cover | 1 |
279-5420 Bucket Ar-Light Material
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
279-5425 Bucket Ar-Light Material
| 15***11 | Mounting Group-Cylinder | 1 |
| 16***36 | Cover Group-Lines | 1 |
| 27***69 | Cylinder Group-Hydraulic | 2 |
279-5400 Bucket Ar-Multipurpose
| 19***24 | Edge Group-Cutting | 1 |
| 27***00 | Bucket Ar-Multipurpose | 1 |
| 32***76 | Bucket Ar-Multipurpose | 1 |
296-8057 Bucket Ar-Multipurpose
| 15***27 | Bucket As-Dirt | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
296-8055 Bucket Ar-Multipurpose
| 14***35 | Edge | 1 |
| 29***55 | Bucket Ar-Multipurpose | 1 |
154-5010 Bucket Ar-Multipurpose
| 13***85 | Edge Group-Cutting | 1 |
| 15***10 | Bucket Ar-Multipurpose | 1 |
| 32***46 | Bucket Ar-Multipurpose | 1 |
154-5004 Bucket Ar-Multipurpose
| 15***04 | Bucket Ar-Multipurpose | 1 |
| 15***11 | Mounting Group-Cylinder | 1 |
| 16***36 | Cover Group-Lines | 1 |
279-5402 Bucket Ar-Multipurpose
| 13***85 | Edge Group-Cutting | 1 |
| 27***02 | Bucket Ar-Multipurpose | 1 |
| 28***99 | Bucket Group-Utility | 1 |
325-7076 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***67 | Bucket As-General Purpose | 1 |
279-5399 Bucket Ar-Multipurpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 16***36 | Cover Group-Lines | 1 |
| 27***69 | Cylinder Group-Hydraulic | 2 |
279-5391 Bucket Ar-Multipurpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 16***36 | Cover Group-Lines | 1 |
| 27***69 | Cylinder Group-Hydraulic | 2 |
293-0139 Bucket Ar-Multipurpose
| 14***36 | Edge | 1 |
| 29***39 | Engine; - Assembly, Bucket Ar-Multipurpose | 1 |
325-7035 Bucket Ar-Multipurpose
| 14***04 | Bucket As-Dirt | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
325-7055 Bucket Ar-Multipurpose
| 14***36 | Edge | 1 |
| 32***55 | Bucket Ar-Multipurpose | 1 |
325-7065 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 28***88 | Bucket As-Dirt | 1 |
279-5380 Bucket Ar-Multipurpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
325-7075 Bucket Ar-Multipurpose
| 14***36 | Edge | 1 |
| 32***75 | Bucket Ar-Multipurpose | 1 |
279-5382 Bucket Ar-Multipurpose
| 13***86 | Edge Group-Cutting | 1 |
| 27***82 | Bucket Ar-Multipurpose | 1 |
| 32***56 | Bucket Ar-Multipurpose | 1 |
325-7056 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***39 | Bucket As-Dirt | 1 |
279-5390 Bucket Ar-Multipurpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 9 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
325-7046 Bucket Ar-Multipurpose
| 14***35 | Edge | 1 |
| 32***46 | Bucket Ar-Multipurpose | 1 |
325-7036 Bucket Ar-Multipurpose
| 19***22 | Edge | 1 |
| 32***36 | Bucket Ar-Multipurpose, Protective Cover | 1 |
325-7050 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***36 | Bucket As-Dirt | 1 |
279-5401 Bucket Ar-Multipurpose
| 13***84 | Edge Group-Cutting | 1 |
| 27***01 | Bucket Ar-Multipurpose | 1 |
| 28***96 | Bucket Group-Utility | 1 |
325-7080 Bucket Ar-Multipurpose
| 14***37 | Edge | 1 |
| 32***80 | Bucket Ar-Multipurpose | 1 |
325-7066 Bucket Ar-Multipurpose
| 14***35 | Edge | 1 |
| 32***66 | Bucket Ar-Multipurpose | 1 |
279-5398 Bucket Ar-Multipurpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 9 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
279-5403 Bucket Ar-Multipurpose
| 13***86 | Edge Group-Cutting | 1 |
| 27***03 | Bucket Ar-Multipurpose | 1 |
| 28***02 | Bucket Group-Utility | 1 |
325-7040 Bucket Ar-Multipurpose
| 14***34 | Edge | 1 |
| 32***40 | Bucket Ar-Multipurpose | 1 |
325-7045 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***33 | Bucket As-Dirt | 1 |
279-5392 Bucket Ar-Multipurpose
| 13***87 | Edge Group-Cutting | 1 |
| 27***92 | Bucket Ar-Multipurpose | 1 |
| 32***66 | Bucket Ar-Multipurpose | 1 |
325-7070 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***63 | Bucket As-General Purpose | 1 |
325-7060 Bucket Ar-Multipurpose
| 14***37 | Edge | 1 |
| 32***60 | Bucket Ar-Multipurpose | 1 |
279-5381 Bucket Ar-Multipurpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 16***36 | Cover Group-Lines | 1 |
| 27***69 | Cylinder Group-Hydraulic | 2 |
285-6101 Bucket Ar-Utility
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***75 | Bucket As-General Purpose | 1 |
285-6100 Bucket Ar-Utility
| 19***22 | Edge | 1 |
| 28***00 | Bucket Ar-Utility | 1 |
285-6095 Bucket Ar-Utility
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***71 | Bucket As-General Purpose | 1 |
268-4089 Bucket As-Dirt
| 19***22 | Edge | 1 |
| 26***89 | Bucket As-Dirt | 1 |
285-6088 Bucket As-Dirt
| 14***36 | Edge | 1 |
| 28***88 | Bucket As-Dirt | 1 |
165-6156 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***56 | Bucket As-Dirt | 1 |
| 16***89 | Tack-Fastener | 4 |
279-5440 Bucket As-Dirt
| 14***35 | Edge | 1 |
| 27***40 | Bucket As-Dirt | 1 |
152-0227 Bucket As-Dirt
| 15***27 | Bucket As-Dirt | 1 |
| 22***32 | Edge | 1 |
141-6704 Bucket As-Dirt
| 14***04 | Bucket As-Dirt | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
165-6157 Bucket As-Dirt
| 14***37 | Edge | 1 |
| 16***57 | Bucket As-Dirt | 1 |
285-6089 Bucket As-Dirt
| 14***37 | Edge | 1 |
| 28***89 | Bucket As-Dirt | 1 |
279-5433 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***23 | Bucket As-Light Material | 1 |
279-5439 Bucket As-Dirt
| 27***39 | Bucket As-Dirt | 1 |
| 29***57 | Edge | 1 |
279-5436 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***28 | Bucket As-Light Material | 1 |
279-5434 Bucket As-Dirt
279-5437 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***37 | Bucket As-Dirt | 1 |
279-5368 Bucket As-General Purpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 9 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
279-5363 Bucket As-General Purpose
| 13***84 | Edge Group-Cutting | 1 |
| 16***56 | Bucket As-Dirt | 1 |
| 27***63 | Bucket As-General Purpose | 1 |
292-9271 Bucket As-General Purpose
| 14***32 | Clam As-Multipurpose Bucket | 1 |
| 15***12 | Pin | 2 |
| 27***84 | Blade Group-Multipurpose Bucket | 1 |
279-5371 Bucket As-General Purpose
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
292-9270 Bucket As-General Purpose -High Capacity
| 15***12 | Pin | 2 |
| 15***70 | Clam As-Multipurpose Bucket | 1 |
| 15***47 | Blade Group-Multipurpose Bucket | 1 |
279-5367 Bucket As-General Purpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 26***89 | Bucket As-Dirt | 1 |
279-5364 Bucket As-General Purpose
| 13***85 | Edge Group-Cutting | 1 |
| 16***57 | Bucket As-Dirt | 1 |
| 27***64 | Bucket As-General Purpose | 1 |
279-5372 Bucket As-General Purpose
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 27***72 | Bucket As-General Purpose | 1 |
279-5375 Bucket As-General Purpose
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 27***75 | Bucket As-General Purpose | 1 |
279-5376 Bucket As-General Purpose
| 14***32 | Clam As-Multipurpose Bucket | 1 |
| 15***12 | Pin | 2 |
| 15***45 | Blade Group-Multipurpose Bucket | 1 |
292-9224 Bucket As-Light Material
| 15***12 | Pin | 2 |
| 19***08 | Clam As-Multipurpose Bucket | 1 |
| 29***24 | Bucket As-Light Material, Tyre/Tire, Tyre/Tire; Tire | 1 |
292-9223 Bucket As-Light Material
| 15***12 | Pin | 2 |
| 15***70 | Clam As-Multipurpose Bucket | 1 |
| 29***23 | Bucket As-Light Material, Wheel Disc | 1 |
279-5428 Bucket As-Light Material
| 14***32 | Clam As-Multipurpose Bucket | 1 |
| 15***12 | Pin | 2 |
| 27***28 | Bucket As-Light Material | 1 |
279-5429 Bucket As-Light Material
| 15***12 | Pin | 2 |
| 15***53 | Clam As-Multipurpose Bucket | 1 |
| 27***29 | Bucket As-Light Material | 1 |
279-5424 Bucket As-Light Material
| 15***12 | Pin | 2 |
| 27***24 | Bucket As-Light Material | 1 |
| 29***42 | Blade Group-Multipurpose Bucket | 1 |
279-5422 Bucket As-Light Material
| 15***12 | Pin | 2 |
| 15***70 | Clam As-Multipurpose Bucket | 1 |
| 27***96 | Blade Group-Multipurpose Bucket | 1 |
279-5421 Bucket As-Light Material
| 15***12 | Pin | 2 |
| 15***53 | Clam As-Multipurpose Bucket | 1 |
| 27***88 | Blade Group-Multipurpose Bucket | 1 |
279-5423 Bucket As-Light Material
| 15***12 | Pin | 2 |
| 19***08 | Clam As-Multipurpose Bucket | 1 |
| 27***05 | Blade Group-Multipurpose Bucket | 1 |
285-6098 Bucket As-Utility
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 28***97 | Bucket As-Utility | 1 |
285-6103 Bucket As-Utility
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 28***98 | Bucket As-Utility, Fuel Injection Pump; - Assembly | 1 |
285-6097 Bucket As-Utility
| 15***12 | Pin | 2 |
| 15***38 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
| 28***97 | Bucket As-Utility | 1 |
268-4084 Bucket Gp-Dirt
| 19***42 | Fork Group-Pallet | 2 |
| 26***81 | Carriage Group-Fork | 1 |
| 26***84 | Bucket Group-Dirt | 1 |
152-0231 Bucket Gp-Dirt
| 15***31 | Bucket Group-Dirt | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
152-0232 Bucket Gp-Dirt
| 15***32 | Bucket Group-Dirt | 1 |
| 19***43 | Fork Group-Pallet | 2 |
| 26***81 | Carriage Group-Fork | 1 |
296-8191 Bucket Gp-General Purpose
| 19***45 | Fork Group-Pallet | 2 |
| 26***81 | Carriage Group-Fork | 1 |
| 29***91 | Bucket Group-General Purpose | 1 |
286-9278 Bucket Gp-Grapple
| 19***42 | Fork Group-Pallet | 2 |
| 28***78 | Bucket Group-Grapple | 1 |
| 35***71 | Carriage Group-Fork | 1 |
279-5359 Bucket Gp-Grapple -Industrial
| 27***59 | Bucket Group-Grapple; -Industrial | 1 |
| 35***71 | Carriage Group-Fork | 6 |
286-9244 Bucket Gp-Grapple
| 19***43 | Fork Group-Pallet | 2 |
| 28***44 | Bucket Group-Grapple | 1 |
| 35***71 | Carriage Group-Fork | 1 |
293-0141 Bucket Gp-Multipurpose
| 14***05 | Bearing-Sleeve | 4 |
| 14***37 | Edge | 1 |
| 15***38 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
325-7047 Bucket Gp-Multipurpose
| 14***05 | Bearing-Sleeve | 4 |
| 16***30 | Plate-Identification; (Cat) | 2 |
| 22***32 | Edge | 1 |
325-7077 Bucket Gp-Multipurpose
| 25***01 | Coupler Group-Quick | 1 |
| 25***24 | Lines Group-Coupler | 1 |
| 25***90 | Wiring Group-Quick Coupler | 1 |
325-7067 Bucket Gp-Multipurpose
| 25***00 | Coupler Group-Quick | 1 |
| 28***90 | Fitting Group-Hydraulic; -Manual | 1 |
| 32***67 | Bucket Group-Multipurpose | 1 |
279-5389 Bucket Gp-Multipurpose
| 15***35 | Plate-Instruction; (Load Capacity) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 25***95 | Step As | 1 |
154-5009 Bucket Gp-Multipurpose
| 15***09 | Bucket Group-Multipurpose | 1 |
| 15***35 | Plate-Instruction; (Load Capacity) | 1 |
| 16***89 | Tack-Fastener | 4 |
154-5005 Bucket Gp-Multipurpose
| 15***05 | Bucket Group-Multipurpose | 1 |
| 19***45 | Fork Group-Pallet | 2 |
| 35***71 | Carriage Group-Fork | 1 |
279-5383 Bucket Gp-Multipurpose
| 26***81 | Carriage Group-Fork | 6 |
| 27***83 | Bucket Group-Multipurpose | 1 |
279-5397 Bucket Gp-Multipurpose
| 14***05 | Bearing-Sleeve | 4 |
| 14***35 | Edge | 1 |
| 15***38 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
279-5404 Bucket Gp-Multipurpose
| 14***05 | Bearing-Sleeve | 4 |
| 14***36 | Edge | 1 |
| 15***38 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
325-7037 Bucket Gp-Multipurpose
| 14***05 | Bearing-Sleeve | 4 |
| 15***38 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
| 16***30 | Plate-Identification; (Cat) | 2 |
325-7057 Bucket Gp-Multipurpose
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
285-6102 Bucket Gp-Utility
| 16***28 | Plate | 1 |
| 28***02 | Bucket Group-Utility | 1 |
| 5C***53 | Bolt (M6x1.00x16mm); (M6x1x16mm Thk) | 5 |
285-6096 Bucket Gp-Utility
| 13***79 | Washer; (11x32x3-mm Thk) | 2 |
| 13***51 | Spacer; (11x19x6-mm Thk) | 2 |
| 15***97 | Spring | 2 |
285-6099 Bucket Gp-Utility
| 20***85 | Pin | 2 |
| 21***62 | Cylinder & Link Group-Coupler; -Lh | 1 |
| 21***63 | Cylinder & Link Group-Coupler; -Rh | 1 |
293-9427 Carriage & Fork Ar
| 19***40 | Cylinder Group-Hydraulic; -Coupler | 1 |
| 19***42 | Pin | 1 |
| 21***57 | Link Group-Coupler | 1 |
293-9428 Carriage & Fork Ar
| 19***40 | Cylinder Group-Hydraulic; -Coupler | 1 |
| 19***42 | Pin | 1 |
| 21***57 | Link Group-Coupler | 1 |
353-1696 Carriage & Fork Ar
| 13***96 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 11 |
| 35***96 | Carriage & Fork Ar | 1 |
353-1693 Carriage & Fork Ar
| 13***94 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 8 |
| 35***93 | Carriage & Fork Ar | 1 |
353-1697 Carriage & Fork Ar
| 13***97 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 11 |
| 35***97 | Carriage & Fork Ar | 1 |
353-1694 Carriage & Fork Ar
| 13***95 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 8 |
| 35***94 | Carriage & Fork Ar | 1 |
293-9429 Carriage & Fork Ar
| 13***93 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 6 |
| 29***29 | Carriage & Fork Ar | 1 |
351-9371 Carriage Gp-Fork
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***14 | Fork Group-Grapple; -Industrial | 9 |
| 27***75 | Cylinder Group-Grapple; -Industrial | 2 |
261-6681 Carriage Gp-Fork
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 11 |
| 19***24 | Edge-Cutting | 1 |
| 26***81 | Carriage Group-Fork | 1 |
293-9426 Carriage Gp-Fork
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 13 |
| 29***26 | Carriage Group-Fork | 1 |
| 29***02 | Edge-Cutting | 1 |
293-0148 Clam As-Multipurpose Bucket
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
154-5053 Clam As-Multipurpose Bucket
| 15***53 | Clam As-Multipurpose Bucket | 1 |
| 28***05 | Fork Group-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
149-4232 Clam As-Multipurpose Bucket
| 14***32 | Clam As-Multipurpose Bucket | 1 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***14 | Fork Group-Grapple; -Industrial | 2 |
154-5070 Clam As-Multipurpose Bucket
| 15***70 | Clam As-Multipurpose Bucket | 1 |
| 28***10 | Fork Group-Grapple | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
199-8308 Clam As-Multipurpose Bucket
| 16***54 | Tine | 1 |
| 19***08 | Clam As-Multipurpose Bucket | 1 |
| 3E***70 | Pin; (Spring) | 1 |
296-0582 Conversion Gp-Work Tool -Kit, High Flow
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 9 |
| 29***82 | Conversion Group-Work Tool; -Kit, High Flow | 1 |
258-3791 Coupler Ar-Quick
| 22***29 | Positioner Group-Fork | 1 |
| 25***91 | Coupler Ar-Quick | 1 |
258-2790 Coupler Ar-Quick
| 22***29 | Positioner Group-Fork | 1 |
| 25***90 | Coupler Ar-Quick | 1 |
258-2500 Coupler Gp-Quick
| 22***29 | Positioner Group-Fork | 1 |
| 25***00 | Coupler Group-Quick | 1 |
258-2501 Coupler Gp-Quick
| 16***41 | Tine | 1 |
| 25***01 | Coupler Group-Quick | 1 |
| 9R***59 | Clip | 1 |
162-5236 Cover Gp-Lines
| 16***36 | Cover Group-Lines | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 7 |
215-3963 Cylinder & Link Gp-Coupler -Rh
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***89 | Tack-Fastener | 4 |
215-3962 Cylinder & Link Gp-Coupler -Lh
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***89 | Tack-Fastener | 4 |
296-7680 Edge Gp-Cutting
| 03***57 | Washer; (13x26x6-mm Thk) | 4 |
| 17***14 | Film-Stripe; (Reflective, Red, White) | 1 |
| 17***15 | Film; (Reflective)(Warning) | 1 |
135-9384 Edge Gp-Cutting
| 13***84 | Edge Group-Cutting | 1 |
| 16***31 | Mounting Group-Cylinder; -Utility | 1 |
| 16***40 | Grapple Group-Utility | 1 |
135-9385 Edge Gp-Cutting
| 13***85 | Edge Group-Cutting | 1 |
| 15***11 | Pin | 4 |
| 15***35 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
135-9383 Edge Gp-Cutting
| 13***83 | Edge Group-Cutting | 1 |
| 16***95 | Cylinder Group-Grapple | 1 |
| 16***31 | Mounting Group-Cylinder; -Utility | 1 |
195-7124 Edge Gp-Cutting
| 03***57 | Washer; (13x26x6-mm Thk) | 2 |
| 17***53 | Plate | 2 |
| 18***97 | Plate Group-Roading; -Lh | 1 |
135-9387 Edge Gp-Cutting
| 13***87 | Edge Group-Cutting | 1 |
| 19***37 | Plate | 1 |
| 19***45 | Spring | 1 |
135-9386 Edge Gp-Cutting
| 13***86 | Edge Group-Cutting | 1 |
| 19***37 | Plate | 1 |
| 19***45 | Spring | 1 |
285-6115 Fork Ar-Grapple -Utility
| 19***45 | Spring | 1 |
| 28***15 | Fork Ar-Grapple; -Utility | 1 |
| 30***68 | Pin-Spring | 1 |
285-6114 Fork Ar-Grapple -Utility
| 19***37 | Plate | 1 |
| 19***38 | Bracket | 1 |
| 19***54 | Pin-Spring | 2 |
279-5350 Fork Ar-Grapple -Industrial
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 06***51 | Clamp | 4 |
| 10***59 | Spacer; (9x20x39.2-mm Thk) | 1 |
279-5360 Fork Ar-Grapple -Industrial
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 06***51 | Clamp | 4 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 4 |
164-9614 Fork Gp-Grapple -Industrial
| 16***14 | Fork Group-Grapple; -Industrial | 1 |
| 17***47 | Pin | 1 |
| 9R***01 | Pin-Cotter | 1 |
279-5351 Fork Gp-Grapple -Industrial
| 16***60 | Pin-Spring | 1 |
| 19***42 | Pin | 1 |
| 25***36 | Handle & Pin Group-Coupler; -Rh | 1 |
285-6110 Fork Gp-Grapple
| 16***60 | Pin-Spring | 1 |
| 19***42 | Pin | 1 |
| 25***38 | Handle & Pin Group-Coupler; -Lh | 1 |
195-6943 Fork Gp-Pallet
| 17***14 | Film-Stripe; (Reflective, Red, White) | 1 |
| 17***15 | Film; (Reflective)(Warning) | 1 |
| 17***51 | Plate As; (Rh) | 1 |
195-6942 Fork Gp-Pallet
| 17***14 | Film-Stripe; (Reflective, Red, White) | 1 |
| 17***15 | Film; (Reflective)(Warning) | 1 |
| 17***50 | Plate As; (Lh) | 1 |
195-8545 Fork Gp-Pallet
| 18***86 | Step As | 1 |
| 19***45 | Fork Group-Pallet | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
285-6105 Fork Gp-Utility
| 11***14 | Screen; (Water Tank) | 1 |
| 11***15 | Gasket | 1 |
| 28***05 | Fork Group-Utility | 1 |
165-8732 Fork Gp-Utility
| 16***32 | Fork Group-Utility | 1 |
| 2S***08 | Washer-Retaining; (0.531x3.25x0.438-In Thk) | 2 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 1 |
279-5358 Frame Gp-Fork -Industrial
| 25***27 | Screw-Truss Head; (No 12x17.46-mm) | 4 |
| 25***98 | Holder-Cup | 1 |
| 25***99 | Tray; (Change) | 1 |
279-5352 Frame Gp-Fork -Industrial
| 19***06 | Cap As; (Water Tank) | 1 |
| 19***07 | Fitting-Drain | 1 |
| 27***52 | Frame Group-Fork; -Industrial | 1 |
285-6116 Grapple & Cylinder Gp-Utility
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
165-8740 Grapple Gp-Utility
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 16***40 | Grapple Group-Utility | 1 |
| 20***45 | Strap-Cable | 2 |
258-2536 Handle & Pin Gp-Coupler -Rh
| 25***68 | Compressor & Mtg Group-Refrig | 1 |
| 25***36 | Handle & Pin Group-Coupler; -Rh | 1 |
| 25***46 | Wiring Group-Heater | 1 |
258-2538 Handle & Pin Gp-Coupler -Lh
| 10***74 | Seal-Connector | 3 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
319-9480 Kit-Roading Plate & Mounting -Bucket
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 22***57 | Switch As-Limit; (Load Control) | 1 |
177-9152 Kit-Roading Plate & Mounting -Bucket
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***31 | Switch-Temperature; (Air Conditioner) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
258-3645 Kit-Water Tank & Mounting
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
| 25***45 | Kit-Water Tank & Mounting | 1 |
346-1833 Kit-Water Tank & Mounting
| 25***66 | Installation Group-Radio | 1 |
| 25***90 | Window Group-Cab; -Side | 1 |
| 25***29 | Accessory Group-Cab | 1 |
215-3957 Link Gp-Coupler
| 21***57 | Link Group-Coupler | 1 |
| 25***68 | Cover Group-Cab | 1 |
| 25***17 | Spring Group-Gas; -Includes Lift Handle | 1 |
258-2537 Lock Gp-Quick Coupler -Lh
| 25***37 | Lock Group-Quick Coupler; -Lh | 1 |
| 27***74 | Cable Group-Control | 1 |
| 29***97 | Handle Group | 1 |
258-2535 Lock Gp-Quick Coupler -Rh
| 25***35 | Lock Group-Quick Coupler; -Rh | 1 |
| 8T***42 | Rod End-Yoke | 1 |
| 8T***44 | Pin As-Spring | 1 |
175-4238 Lock Gp-Quick Coupler -Mechanical
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 25***10 | Window Group-Cab | 1 |
| 25***20 | Liner Group-Cab | 1 |
184-6098 Plate Gp-Roading -Rh
| 10***33 | Kit; (Receptacle) (Includes Receptacle As) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***16 | Terminal | 1 |
184-6097 Plate Gp-Roading -Lh
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***93 | Lockwasher | 1 |
| 18***97 | Plate Group-Roading; -Lh | 1 |
188-7733 Step Gp-Material Handling Arm
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 2 |
| 10***33 | Kit; (Receptacle) (Includes Receptacle As) | 1 |
| 10***95 | Terminal-Blade; (14-Ga To 18-Ga) | 2 |
173-7407 Stop Gp-Bucket -Utility
| 17***07 | Stop Group-Bucket; -Utility | 1 |
| 25***71 | Switch As; (Temperature Control) | 1 |
| 25***72 | Switch As; (Blower Fan Speed) | 1 |
116-2001 Strainer Gp-Water
| 11***01 | Strainer Group-Water | 1 |
| 26***66 | Control Group-Joystick; -Lh | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
166-2551 Tank Gp-Water
| 16***51 | Tank Group-Water | 1 |
| 26***65 | Control Group-Joystick; -Lh, High Flow | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
141-4999 Tooth Gp-Uni
| 14***99 | Tooth Group-Uni | 1 |
| 26***64 | Control Group-Joystick; -Rh | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
297C serial number reference
The PIN/serial plate on a 297C is a metal tag riveted to the machine frame, typically at the rear of the chassis near the tailgate/engine enclosure - the same general area used across Cat skid steer and multi-terrain loader frames. The first three characters of the PIN are the prefix identifying the specific model and build series (GCP for 297C); the following digits are the sequential unit number within that prefix. Machines built from the early 2000s onward carry the full 17-character PIN, with the serial number occupying the last 8 characters.
| Prefix | Identifies | Notes |
|---|---|---|
| GCP | 297C Multi Terrain Loader (all configurations, including XPS high-flow/high-pressure hydraulic option) | Confirmed sole PIN prefix for the 297C, covering GCP1-UP (GCP00001 and up). Powered by the Cat 3044C (Cat C3.4 DIT) diesel. The XPS high-flow/high-pressure hydraulic package is a build option within this same GCP serial range, not a separate prefix or model designation. Introduced in 2007; production continued into the early 2010s before the successor 297D line launched in 2014, so treat any specific end-of-production year as approximate and confirm the exact GCP cutoff with a dealer using the full PIN. Do not confuse with 277C (JWF prefix), 277C2 (MET prefix), or 287C (MAS prefix) — related C-series Multi Terrain Loader models, not the 297C. |
Frequently asked questions
What engine does the Caterpillar 297C use?
The 297C uses the Cat C3.4 DIT engine (Cat 3044C DIT), a 4-cylinder turbocharged diesel of 3.3 L (201 cu in) displacement, rated at roughly 70 kW (94 hp) gross and 67 kW (90 hp) net at 2500 rpm.
What is the operating weight of the Caterpillar 297C?
Operating weight is approximately 4,599 kg (10,139 lb). This varies somewhat by configuration, such as single versus dual-level suspension undercarriage or standard versus XPS hydraulics, so treat it as a nominal figure and confirm against the specific machine's spec plate.
What replaced the Caterpillar 297C?
Caterpillar replaced the 297C with the 297D and the higher-output 297D XHP, introduced around 2011, which stepped up to more engine power, a sealed and pressurized cab, and electronic self-leveling control.
What 297C owners discuss
Why do the tracks on a 297C sometimes sit tipped in or uneven, with one side higher than the other?
Owners trace this to the suspended torsion-axle undercarriage: the rear axle mount bracket can loosen, shear its retaining hardware, or let the axle itself bend, tilting the track so the outside edge sits noticeably higher than the inside (roughly 38 mm / 1.5 in in reported field cases). It shows up most on machines worked with repeated spin turns rather than three-point turns - the sideloading concentrates stress at the axle bracket. Some serial ranges got a factory bracket update at no charge under about 1,500 hours; ask a dealer whether a given serial number falls in that window. Have your dealer verify axle and bracket condition, and check for a related service update, before the machine goes back into heavy grading or spin-turn work.
What's a known cause of a 297C suddenly running rough with smoke and no power?
On the C3.4 DIT engine, owners report sudden rough running - coughing, sputtering, loss of power, heavy exhaust smoke - that a fresh fuel filter alone doesn't fix. Field fixes point to two usual suspects: a clogged inlet fitting on the fuel pump housing, or a weakening fuel injection pump (dealers have reported keeping spares in stock for this reason). Blue smoke paired with a rev-up-then-sputter pattern near operating temperature has also been linked to injection pump wear rather than a simple filter or air problem. Pull fuel pressure and injector balance readings before replacing parts on a guess. Have your dealer verify fuel system diagnostics before committing to a pump replacement.
The loader arms and bucket tilt feel sluggish - what do owners check first?
A common complaint is a bucket that takes an unusually long time (reports of around 30 seconds) to dump, or arm/tilt response that lags. The community's troubleshooting order is: replace the hydraulic filter first and cut the old one open to look for metal contamination, then check main pump output pressure at low idle versus high idle at full operating temperature - more than roughly a 10% spread between the two readings points to a worn pump. Discolored paint on the pump housing is called out as a visual tell for chronic overheating and internal leakage. Separately, unwanted arm drift (bucket creeping without input) has been traced to the bucket positioning valve, which links the lift and tilt circuits together. Have your dealer verify pump pressure and valve condition before replacing hydraulic components.
Parking brake won't release and the exclamation/alert light is flashing - what's going on?
This is a recurring electrical complaint on the C-series MTL joystick controls. The park brake logic requires the joystick to report a clean neutral signal to the machine's control module; if the joystick's internal pot or wiring is drifting or reads voltage that's too high, the module won't see neutral, the brake stays locked, and the alert light blinks. Reported fixes range from a fresh joystick calibration to full joystick replacement (which itself then needs recalibrating) when the internal sensor has failed. Pull the stored fault codes first rather than swapping parts blind. Have your dealer verify joystick calibration and wiring before replacing the joystick assembly.
All the gauges, hour meter, and warning lights went dead at once - is this a common failure?
Yes, a total loss of the gauge cluster, hour meter, and indicator lights while the machine otherwise runs fine is a reported failure mode, and it's usually not a blown fuse - owners checking the fuses behind and inside the cab typically find them all intact. That points to the instrument cluster itself or a harness/ground connection feeding it rather than a single failed component. Check battery terminal condition and the main dash harness connectors for corrosion or a loose ground before assuming the cluster itself has failed. Have your dealer verify the instrument cluster and wiring harness before replacing the cluster.
Why does the cab glass buzz or vibrate on a 297C, and is that a real problem?
This comes up as a known nuisance rather than a mechanical defect: with track tension set tight, resonance from the tracks can set the lower cab glass buzzing, and dealers have fielded repeat complaints about it on this platform. It's generally described as a vibration/tension tuning issue, not a structural fault. Separately, owners note the suspended (torsion) undercarriage rides noticeably softer over rough or rutted ground than a rigid track loader chassis, and it disturbs less ground when turning - traits tied directly to this loader's suspended-axle design rather than a fixed track frame.
What should I check before buying a used 297C?
Pull recent engine and hydraulic oil samples rather than trusting a visual check alone - metal or coolant contamination in the report is the clearest red flag on this platform. Inspect the undercarriage closely: confirm both tracks sit level (not tipped in, which points to bent axles or a failed axle bracket), check remaining track/pad wear, and verify tension is within spec rather than overtightened. Cycle every hydraulic function through full travel and time the bucket dump - sluggish response points to a tired main pump. Check that every gauge, warning light, and the parking brake release respond correctly, since instrument cluster and joystick-to-brake faults are common on this generation. Ask for the machine's service history and serial number so a dealer can check it against any factory undercarriage bracket update. Have your dealer verify hydraulic pump pressure, undercarriage geometry, and outstanding service updates before you finalize the purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 297C part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.