Caterpillarforest productsforwarder
Caterpillar 2948
Maintenance schedule, common problems & OEM parts breakdown
The Cat 2948 is a factory-built, articulated wheeled forwarder from Caterpillar's early Forest Products line, built for cut-to-length log extraction. It runs a 6-cylinder, 7.2 L (441 cu in) Cat C7 diesel engine with HEUI hydraulic fuel injection and ADEM electronic control, driving through a drop-box transfer case to 6WD or 8WD bogie axle configurations for flotation on soft ground. A rear-mounted knuckleboom loader with hydraulic grapple rotator swings logs into a log bunk closed by a tailgate. A front clearing blade, a telescopic boom stick, and a central lubrication system for the chassis and loader pivots were factory options. Caterpillar catalogs the 2948 alongside its smaller 2748 sibling under the PCH00001-Up and PCL00001-Up build ranges. No factory spec sheet for this exact nameplate is available in public documentation, so operating weight and load capacity are not stated here; verify them against your machine's serial number with a Cat dealer rather than substituting a chart from a different forwarder model. Its build era tracks the C7 industrial engine's production window in the 2000s, ahead of the 534-584HD forwarders Caterpillar sells today.
The 2948 and its 2748 running mate represent an early generation of Caterpillar's factory-built forestry forwarders, cataloged under two build ranges, PCH00001-Up and PCL00001-Up, that most likely reflect separate production or regional runs rather than a lettered series revision; Cat's parts records show no 2948B or 2948C. The clearest engineering line is the engine: the 2948 carries the earlier HEUI-injected, ADEM-controlled C7 industrial engine, not the C7 ACERT that Caterpillar later fitted to the 584 and 584HD forwarders that succeeded this platform. That puts the 2948 one emissions and electronics generation behind its direct successors, even though the underlying C7 architecture carries over. For today's used and parts market, that shared C7 architecture is the practical payoff: turbochargers, fuel injectors, cylinder heads and other core engine components cross-reference to the 545C skidder and the 584/584HD forwarders, so sourcing parts for a 2948 can draw on a wider used and remanufactured supply pool than the rare forwarder nameplate alone would suggest.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 2948 specifications
Engine
| Machine identity | The 2948 is a Cat Forest Products wheeled forwarder, built alongside the closely related 2748 as one factory-catalog line (build ranges shown as PCH00001-Up and PCL00001-Up). It sits in the lineage ahead of the later 584 / 584HD forwarders, which took over the 18- and 20-tonne forwarder class after this generation. |
| Engine model | Cat C7 diesel, inline-6. This engine is common to the 2748/2948 line, the 545C wheel skidder, and the following 584 / 584HD forwarders. |
| Displacement / cylinders | 7.2 L (441 cu in), 6 cylinders (C7 base engine spec). |
| Gross/net power | Not published for this configuration in available literature. Verify against the machine's original spec sheet or dealer records. |
| Emissions tier | Not documented for this configuration. |
Weights
| Operating weight | Not documented in available literature for this generation. |
| Shipping weight | Not documented. |
| Ground pressure | Not published. |
Dimensions
| Log loader boom (work tool option) | An 8.5 m loader arm was offered as a log-loading work tool for this forwarder, per its factory parts catalog. |
| Transport length/width/height | Not documented in available literature. |
| Wheelbase / track gauge | Not documented. |
| Ground clearance | Not documented. |
Performance
| Travel speed | Not documented. |
| Drawbar / gradeability | Not documented. |
Service capacities (summary)
| Fuel tank | Not documented. |
| Hydraulic system | Not documented. |
| Engine oil | Not documented. |
| Cooling system | Not documented. |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
2948 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | Not published for this generation under the 2948 designation. The same Cat C7 engine platform on later comparable Cat wheeled forwarders takes roughly 18-20 L (4.8-5.3 US gal) refill - given as a reference figure only, not confirmed for this exact model, verify against the machine's own serial-specific manual. | Cat C7 inline-6 diesel. Cat DEO or DEO-ULS 15W-40 for ambient -18 to 40 C (0 to 104 F). Cat DEO Cold Weather or Arctic DEO Synthetic recommended for starts down to -40 C (-40 F) in cold climates. |
| Cooling system | Not published for this generation. Comparable C7-family Cat forestry forwarders run roughly 35-40 L (9-10.5 US gal) - reference only, not confirmed for the 2948. | Cat ELC (Extended Life Coolant), premix or concentrate mixed to the ratio specified for ambient operating temperature. |
| Fuel tank | Not published for this generation. The related later-generation forwarder built on the same C7 platform carries 255 L (67.3 US gal) - given as a comparable-machine reference only, not confirmed for the 2948. | Ultra-low sulfur No. 2-D diesel meeting Cat fuel specification. Switch to No. 1-D or a winter-blend fuel below about -7 C (20 F). |
| Hydraulic system and tank (implement circuit plus hydrostatic propel) | Not published for this generation. The related later-generation forwarder on the same platform carries a 174 L (46 US gal) reservoir - comparable-machine reference only, not confirmed for the 2948. | Cat HYDO Advanced 10 first choice. Select viscosity grade by ambient temperature per the Cat fluid recommendation chart - heavier grade for warm climates, lighter grade (e.g. HYDO Advanced 5) for cold-start service. |
| Drop box (2-speed gearbox behind the hydrostatic drive) | Not published for this generation. Comparable Cat wheeled forwarders in this drivetrain family show roughly 4.5-5 L (1.2-1.3 US gal) - reference only, not confirmed for the 2948. | Cat TDTO 30 (Transmission/Drive Train Oil). |
| Axle/differential, front | Not published for this generation. Comparable Cat forwarder axles run roughly 11-12 L (2.9-3.2 US gal) - reference only, not confirmed for the 2948. | Cat TDTO 50 or Cat GO 80W-90 gear oil, per axle specification. |
| Axle/differential, rear bogie | Not published for this generation. Comparable Cat forwarder bogie differentials run roughly 11-12 L (2.9-3.2 US gal) - reference only, not confirmed for the 2948. | Cat TDTO 50 or Cat GO 80W-90 gear oil. |
| Final drives, each (bogie wheel-end reduction) | Not published for this generation. Comparable Cat forwarder final drives run roughly 3.5-4 L (0.9-1.1 US gal) each - reference only, not confirmed for the 2948. | Cat TDTO 50 or Cat GO 80W-90 gear oil. |
| Grease (articulation joints, loader boom, and grapple rotator points) | Spec only, no fill capacity - lubricate per the machine's grease-point schedule. | Cat Advanced 3Moly Grease, NLGI 2, multipurpose extreme-pressure grease. Cat Utility Grease is an acceptable alternate for moderate-duty points. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 2948 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
| Every 6,000 h |
|
Servicing the 2948 beyond the schedule
Predictive Maintenance & Fluid Analysis
Schedule oil sampling (S·O·S) on the C7 engine, drop-box, axle final drives and hydraulic tank at every planned oil change to catch bearing and gear wear before it reaches the log bunk hydraulics or bogie axle housings. Track HEUI fuel system health through injector actuation trends rather than waiting for a hard fault, since HEUI injectors on the pre-ACERT C7 are sensitive to fuel and hydraulic oil contamination. Monitor grapple rotator and loader cylinder seal wear through hydraulic oil particle counts, especially on machines running the central lubrication option.
Corrective & Common Repairs
Loader and grapple pivot pins wear fastest on the 2948, since the rear-mounted knuckleboom absorbs constant grapple and rotator loading; expect bushing and pin replacement well before any engine work is due. Bogie axle walking-beam bearings and oscillation pivots take a similar beating in soft ground and need regular inspection for play. HEUI injector and high-pressure oil pump faults are the most common C7 driveability complaints; verify hydraulic actuation oil condition before condemning an injector. Articulation hitch bushings and steering cylinder pins are frequent wear-repair items on high-hour machines.
Overhaul & Rebuild Points
Plan the C7 for an in-frame overhaul around cylinder liner, piston and valve-train wear once oil consumption or blow-by climbs, a realistic milestone given the engine's shared duty cycle with the 545C skidder. Drop-box and axle final drive gear sets are the next major rebuild items, carrying both propulsion and the torque reversals of forwarding on grade. Rebuild the knuckleboom loader's cylinders, grapple rotator and boom stick telescoping rails as a group; inspect the articulation hitch casting for frame fatigue any time the machine goes down for driveline work.
Seasonal & Environment Servicing
Wet, needle-laden logging sites clog radiator, charge air cooler and oil cooler cores fast; clean them ahead of the factory interval whenever the 2948 works in slash-heavy terrain. Cold-climate starts call for engine coolant (Cat ELC) freeze-point checks and battery/glow-system inspection before winter cutting season, and hydraulic oil viscosity should be matched to ambient temperature swings on the HYDO Advanced circuit. In wet ground, check the central lubrication system (if fitted) more often, since mud and grit displace grease from articulation and axle pivots faster than the standard interval assumes.
2948 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 112-6523 | Insert-Fuel Filter | Fuel system service | Check fitment → |
| 1R-0751 | Filter-Fuel | Fuel system service | Check fitment → |
| 338-2962 | Filter-Oil | Hydraulic service | Check fitment → |
| 1R-1807 | Filter As-Engine Oil | Lubrication service | Check fitment → |
| 156-0214 | Filter-Oil | Lubrication service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
2948 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| Flash Code 15 | Injection Actuation Pressure (IAP) sensor circuit fault - ECM sees an implausible or missing signal from the high-pressure oil (HEUI) actuation pressure sensor. | Failed IAP sensor, corroded or damaged sensor connector, or an open/shorted wire between the sensor and ECM. | Connect Cat ET and compare sensed pressure to a shop gauge on the high-pressure oil manifold; inspect the sensor connector and harness before replacing the sensor. |
| Flash Code 21 | Sensor supply voltage abnormal - the shared 5V or 8V sensor supply circuit reads outside its normal range, which can affect several sensors at once. | Short to ground or battery in the shared supply wiring, corroded connector pins, or one shorted sensor pulling down the whole supply circuit. | Check supply voltage at the ECM connector, then trace the shared supply wiring and connectors for shorts or corrosion before replacing any single sensor. |
| Flash Code 25 | Boost/inlet manifold pressure sensor fault - signal from the intake manifold pressure sensor is erratic or out of range. | Faulty boost pressure sensor, damaged wiring or connector, or a boost leak between the turbo and intake manifold feeding the sensor a false reading. | Inspect the sensor and connector, check for boost leaks, and verify the reading with Cat ET before replacing the sensor. |
| Flash Code 27 | Coolant temperature sensor fault - sensor circuit voltage is above or below the normal operating range (open or shorted circuit). | Failed coolant temperature sensor, corroded connector, or chafed/broken wiring near the thermostat housing. | Check sensor resistance against spec and test harness continuity; replace the sensor or repair the wiring as needed. |
| Flash Code 34 | Loss of engine speed/timing signal - ECM lost the primary or secondary speed/timing sensor signal needed for injection timing. | Failed speed/timing sensor, damaged harness, incorrect sensor air gap, or a shifted timing/cam gear. | Inspect both speed/timing sensors and connectors behind the front gear cover, check sensor air gap, and verify wiring before further teardown. |
| Flash Code 42 | Engine timing calibration required - ECM flags that the injection timing calibration has not been completed or was lost. | Recent ECM or timing sensor replacement, or a calibration value that was reset or corrupted. | Run the engine speed/timing calibration procedure in Cat ET before continuing diagnosis. |
| Flash Code 46 | Low engine oil pressure warning - ECM-monitored oil pressure has dropped below the normal threshold for the current rpm. | Low oil level, worn oil pump, plugged filter or strainer, or a failed oil pressure sensor giving a false low reading. | Stop and check oil level and a mechanical gauge reading immediately; do not keep running if low pressure is confirmed. |
| Flash Code 52 | Personality module fault - ECM does not recognize a valid engine calibration (personality module) file. | Corrupted or missing calibration file after ECM service, or an ECM hardware fault. | Reprogram the engine calibration with Cat ET; replace the ECM if reprogramming does not resolve the fault. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
2948 attachments & work tools
Rear-mounted knuckleboom loader/crane
The 2948 self-loads through a pillar-mounted knuckleboom crane bolted to the rear frame, not a quick-attach coupler. Two boom-reach arrangements are built for this chassis, roughly 7.8 m (25.6 ft) and 8.5 m (27.9 ft); the longer arrangement adds a service platform for boom access. Forwarder cranes in this size class typically swing 250-380 degrees on a rack-and-pinion or hydraulic slew drive.
Grapple attachment and mounting
Several distinct grapple assemblies are built for this machine, pointing to a factory choice of grapple size rather than one fixed unit. European-style butt-and-bypass log grapples with a steel dampener are the norm for this forwarder class, with gripping area around 0.26-0.36 sq m (2.8-3.9 sq ft) and load ratings near 4,000 kg (8,800 lb) each, varies by configuration/series. The grapple hangs off the boom tip through a hydraulic rotator and a pinned link, not a bolt-on quick coupler.
Log bunk and tailgate system
Standard and wide bunk arrangements are both built for this chassis, each paired with a rear gate/tailgate group and a decking blade that helps retain the load face. Comparable forwarders sharing this product line run bunk lengths around 4.9-5.6 m (16-18.5 ft) with load-stake spacing near 2.4-2.6 m (93-102 in), varies by configuration/series.
Front clearing blade
A front frame option is built both with and without a mounted blade, so the 2948 can ship as a nose-mounted dozer/clearing blade unit or without one. Machines in this product family pair the blade with a wear-resistant cutting edge and offer a separate brush-guard kit for site clearing and trail work.
Telescopic boom stick option
The shorter loader arrangement on this chassis includes an extendable-stick cylinder group, giving a telescoping reach add-on over the fixed-length arrangement. On related forwarder loaders in this line, a telescopic stick adds roughly 1-1.3 m (3.3-4.3 ft) of reach over the base two-piece boom.
Hydraulic kit for the loader/grapple circuit
The log-loader function runs its own relief-valve set and dedicated hose/line kit separate from the machine's main hydraulics, protecting the boom, rotator, and grapple circuits from over-pressure. Wrapped or armored hose routing at the boom and stick is standard practice for this equipment class to resist abrasion from logs and brush.
Central lubrication option
A central lubrication group is cataloged for the loader end of the machine, banking grease to the boom, link, and rotator pin joints from one point instead of individual zerks. This is a factory option on forwarders in this class aimed at cutting manual greasing time at the linkage-heavy loader end.
Guarding and chassis protection
Factory guard groups cover the cab, hydraulic cylinders, hose runs, brush deflection, and machine underbelly, with separate bottom-guard sets for 6-wheel and 8-wheel drive chassis builds. These reflect standard factory-fit protection against log strikes, brush, and stump or rock impact typical of self-loading forwarder duty; exact guard fitment varies by configuration/series.
All 2948 assemblies by section
Every catalogued assembly group for the Caterpillar 2948. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
333-8330 Air Cleaner Gp
| 11***38 | Bracket-Mounting | 2 |
| 17***02 | Clamp | 1 |
| 20***90 | Clamp As-Band; (T-Bolt) | 2 |
338-2889 Air Cleaner Gp
| 06***70 | Cap | 1 |
| 13***28 | Cover As | 1 |
| 13***29 | Valve-Dust; (Air Cleaner) | 1 |
153-1794 Cover Gp-Air Inlet
| 15***94 | Cover Group-Air Inlet; -Engine | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 20***69 | Cover-Air Inlet | 1 |
137-5182 Elbow Gp-Air Inlet
| 13***82 | Elbow Group-Air Inlet | 1 |
| 13***26 | Stud; (M8x1.25x110-mm, M8x1.25x17-mm) | 2 |
| 13***63 | Elbow-Air Inlet | 1 |
333-8580 Lines Gp-Air
| 20***35 | Hose | 1 |
| 20***78 | Clamp-Tbolt | 6 |
| 25***33 | Clamp | 2 |
183-6845 Manifold Gp-Exhaust -Dry
| 17***98 | Bolt-Flange Head; (M10x1.5-Thd) | 8 |
| 18***45 | Manifold Group-Exhaust; -Dry | 1 |
| 18***54 | Manifold-Exhaust; (Center) | 1 |
333-8540 Muffler Gp
| 1W***31 | Clamp-Band; -Turbo Exhaust-Exhaust | 1 |
| 20***26 | Clamp | 1 |
| 24***64 | Clamp-Muffler | 2 |
151-0864 Plug Gp-Air Inlet Manifold
| 15***64 | Plug Group-Air Inlet Manifold | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 9S***05 | Plug-O-Ring; (Straight Thread O-Ring) | 1 |
250-7698 Turbocharger Gp
| 13***02 | Clamp As; (Turbine)(Turbine) | 1 |
| 15***72 | Clamp As; (Compressor) | 1 |
| 24***60 | Hose; (63-cm)(Wastegate) | 0 |
325-3756 Turbocharger Gp
| 25***98 | Turbocharger Group | 1 |
| 32***56 | Turbocharger Group | 1 |
| 3E***17 | Locknut; (M10x1.5-Thd)(Spiralock) | 4 |
Basic Engine
238-4738 Belt Tensioner Gp
| 22***09 | Belt Tensioner | 1 |
| 23***38 | Belt Tensioner Group | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
212-4289 Camshaft Gp
| 10***94 | Plate-Thrust | 1 |
| 1B***05 | Key; (Woodruff) | 1 |
| 21***88 | Camshaft As | 1 |
4w-3462 Carrier Gp-Seal
| 23***83 | Gasket | 1 |
| 24***76 | Seal | 1 |
| 2W***46 | Cover | 1 |
229-8841 Cover Gp-Cylinder Block
| 11***18 | Bolt As; (M8x1.25x16-mm) | 4 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 21***21 | Stud; (M8x1.25-Thd) | 1 |
211-9120 Cover Gp-Front Housing
| 12***57 | Washer; (10.85x19.3x1.27-mm Thk) | 2 |
| 13***22 | Stud | 2 |
| 16***76 | Cover As-Front | 1 |
172-8732 Cover Gp-Front Housing
| 06***55 | Seal-O-Ring (Id=47.22mm) | 1 |
| 17***32 | Cover Group-Front Housing | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 2 |
261-3721 Cover Gp-Valve Mechanism
| 09***49 | Bolt; (M8x1.25x40-mm) | 13 |
| 26***21 | Cover Group-Valve Mechanism | 1 |
| 27***88 | Seal-Valve Cover; (Valve Mechanism Base) | 1 |
210-5590 Crankshaft Gp
| 10***08 | Bearing-Main; (Standard) | 6 |
| 14***62 | Bearing; (0.25mm Undersize) | 0 |
| 14***64 | Bearing; (0.5mm Undersize) | 0 |
305-8141 Cylinder Block Gp
| 10***04 | Sleeve-Cylinder | 0 |
| 21***86 | Bearing-Sleeve; (Camshaft) | 1 |
| 26***74 | Cylinder Block Group | 1 |
221-4482 Cylinder Block Gp
| 1W***07 | Sleeve | 2 |
| 22***82 | Cylinder Block Group | 1 |
| 30***41 | Cylinder Block Group | 1 |
263-3774 Cylinder Block Gp
| 26***74 | Cylinder Block Group | 1 |
| 5P***47 | Washer (Bracket To Valve Support) | 14 |
| 7E***68 | Cap-Crankshaft Bearing | 7 |
314-4184 Cylinder Head As
| 22***00 | Sleeve-Injector | 6 |
| 23***85 | Insert-Valve Seat; (Standard)(Exhaust) | 6 |
| 26***57 | Insert-Valve Seat; (Standard)(Inlet) | 12 |
300-9550 Cylinder Head Gp
| 13***83 | Retainer-Spring | 6 |
| 13***15 | Seat-Valve Spring | 6 |
| 13***18 | Spring-Valve; (Exhaust) | 6 |
219-5849 Cylinder Head Gp
| 13***95 | Gasket-Cylinder Head | 1 |
| 13***52 | Bolt-12 Point Head; (M20x2.5x170mm) | 1 |
| 14***89 | Fastener Group-Cylinder Head | 14 |
219-5847 Cylinder Head Gp
| 1N***99 | Plug-O-Ring; (Straight Thread) | 2 |
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
| 21***47 | Cylinder Head Group | 1 |
241-4101 Damper Gp
| 16***21 | Damper Assem. | 1 |
| 22***21 | Spacer; (101.5x167x8-mm Thk) | 1 |
| 24***01 | Damper Group | 1 |
333-8327 Drain Gp-Engine Oil
| 14***11 | Plug Group | 1 |
| 23***80 | Seal-O-Ring | 1 |
| 30***15 | Adapter As | 1 |
7c-4566 Drain Gp-Engine Oil
| 11***19 | Plug-Magnetic; (Engine Oil Pan Drain) | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 7C***66 | Drain Group-Oil Pan; -Magnetic Plug | 1 |
258-8723 Fastener Gp-Cylinder Head
| 22***44 | Clip | 3 |
| 24***00 | Spring | 11 |
| 25***23 | Fastener Group-Cylinder Head; -Valve Cover Base | 1 |
213-1630 Fastener Gp-Front Cover
| 21***30 | Fastener Group-Front Cover | 1 |
| 6V***17 | Bolt; (M8x1.25x30-mm)(Location Z) | 12 |
| 8T***00 | Bolt (M8x1.25x60mm); (M8x1.25x60-mm) | 2 |
116-4556 Fastener Gp-Front Housing
| 11***56 | Fastener Group-Front Housing; (Housing) | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 6 |
| 6V***36 | Bolt; (M12x1.75x70-mm) | 6 |
113-6170 Fastener Gp-Lifting -Engine, Rear
| 11***70 | Fastener Group-Lifting; -Engine, Rear | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 3 |
| 8T***36 | Capscrew; (Hex Hd) (M10 X 1.50 X 25l Gr 10.9) | 3 |
273-2716 Flywheel Gp
| 1W***64 | Gear-Flywheel Ring; (126-Teeth) | 1 |
| 20***82 | Flywheel As | 1 |
| 27***16 | Flywheel Group | 1 |
205-1321 Gear Gp-Front
| 11***69 | Plate-Thrust | 1 |
| 11***72 | Bearing | 1 |
| 11***19 | Plate-Retaining | 1 |
132-2106 Housing Gp-Flywheel
| 13***06 | Housing Group-Flywheel | 1 |
| 6V***42 | Bolt (M10x1.50x40mm) | 2 |
| 7C***33 | Housing-Flywheel | 1 |
165-4446 Housing Gp-Front
| 16***46 | Housing Group-Front | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 24***59 | Housing-Front | 1 |
139-4081 Lifter Gp-Valve -Mechanism
| 13***81 | Lifter Group-Valve; -Mechanism | 1 |
| 13***84 | Spacer; (15.9x24x6-mm Thk) | 2 |
| 13***76 | Shaft As-Lifter | 1 |
153-5417 Lifting Gp-Engine
| 15***17 | Lifting Group-Engine | 1 |
| 15***96 | Plate-Lifting; (Rear) | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
239-5924 Manifold Gp-Cylinder Block
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 3 |
| 22***96 | Manifold-Oil; (Engine) | 1 |
| 23***24 | Manifold Group-Cylinder Block | 1 |
333-3850 Mounting Gp-Engine
| 18***83 | Nut-Hex Flange; (M12x1.75-Thd) | 6 |
| 20***95 | Spacer; (15x25x5-mm Thk) | 8 |
| 33***50 | Mounting Group-Engine | 1 |
152-5013 Mounting Gp-Fan Drive
| 15***13 | Mounting Group-Fan Drive | 1 |
| 25***23 | Support As; (Fan) | 1 |
| 7E***13 | Bracket | 1 |
317-5412 Mounting Gp-Refrigerant Compr
| 12***40 | Support-Alternator | 1 |
| 21***01 | Sleeve; (Split) | 2 |
| 24***59 | Support | 1 |
126-5931 Pan Gp-Oil -Engine
| 12***31 | Pan Group-Oil; -Engine | 1 |
| 14***09 | Plug As-Sto | 2 |
| 16***77 | Plug As | 1 |
212-3652 Piston & Rod Gp
| 19***53 | Ring-Piston; (Intermediate) | 1 |
| 19***71 | Pin-Piston | 1 |
| 19***72 | Retainer-Pin | 2 |
159-0303 Plug Gp-Cylinder Block
| 15***03 | Plug Group-Cylinder Block; (Cylinder Block) | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 2 |
| 6F***62 | Washer,Flat Transmission Oil Cooler | 1 |
162-8068 Plug Gp-Engine -Oil Gallery
| 14***95 | Plug As | 1 |
| 16***68 | Plug Group-Engine; -Oil Gallery | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
280-6846 Plug Gp-Engine -Engine Oil
| 18***63 | Plug Group | 1 |
| 28***46 | Plug Group-Engine; -Engine Oil | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
121-0802 Plug Gp-Flywheel Housing
| 12***02 | Plug Group-Flywheel Housing | 1 |
| 2P***94 | Plug-Sealing | 1 |
217-8985 Pulley Gp-Crankshaft
| 21***85 | Pulley Group-Crankshaft | 1 |
| 21***94 | Pulley; (8-Groove) | 1 |
| 2W***81 | Plate-Clamp; (Pulley Clamp) | 1 |
253-9319 Pulley Gp-Idler
| 15***00 | Bolt; (M10x1.5x54.25-mm) | 1 |
| 16***58 | Cover; (Dust) | 1 |
| 17***98 | Pulley As-Idler; (8-Groove) | 1 |
256-3831 Rocker Arm Gp -Exhaust
| 25***31 | Rocker Arm Group; -Exhaust | 1 |
| 25***32 | Rocker Arm As; (Exhaust) | 1 |
| 26***24 | Screw-Valve Adjustment; (M10x1.5-Thd) | 1 |
256-3834 Rocker Arm Gp -Inlet
| 25***34 | Rocker Arm Group; -Inlet | 1 |
| 25***35 | Rocker Arm As; (Inlet) | 1 |
| 26***24 | Screw-Valve Adjustment; (M10x1.5-Thd) | 1 |
122-8929 Seal Gp-Crankshaft
| 12***29 | Seal Group-Crankshaft | 1 |
| 24***39 | Seal-Crankshaft; (Front)(Front) | 1 |
| 7C***71 | Seal Group-Crankshaft; (Rear)(Rear) | 1 |
232-3717 Valve Mechanism Gp
| 13***81 | Lifter Group-Valve; -Mechanism | 3 |
| 21***09 | Bridge-Valve | 6 |
| 23***54 | Clip | 1 |
256-3830 Valve Mechanism Gp
| 13***17 | Spring | 5 |
| 13***98 | Shaft Assem. | 1 |
| 13***02 | Stand; (End) | 1 |
Cooling System
338-2935 Cooler Gp
| 18***43 | Locknut; (M10x1.5-Thd) | 20 |
| 28***94 | Adapter | 2 |
| 2P***73 | Cock-Drain; (Water Separator) | 1 |
117-3643 Cooler Gp-Engine Oil
| 11***43 | Cooler Group-Engine Oil | 1 |
| 23***55 | Gasket | 1 |
| 26***43 | Core As-Engine Oil Cooler | 1 |
200-1213 Elbow Gp-Water
| 19***86 | Elbow; (Inlet) | 1 |
| 20***13 | Elbow Group-Water; -Water Pump | 1 |
| 20***58 | Gasket | 1 |
333-8550 Fan Gp-Suction
| 15***83 | Washer-Hard; (8.4x35x2.5-mm Thk) | 8 |
| 33***50 | Fan Group-Suction | 1 |
| 33***47 | Fan; (9-Blade) | 1 |
208-2846 Lines Gp-Water
| 11***23 | Regulator-Water Temperature; (97-Deg C)(Coolant) | 2 |
| 12***66 | Gasket | 1 |
| 13***30 | Housing-Water Regulator | 1 |
208-2848 Plug Gp-Water Lines
| 20***48 | Plug Group-Water Lines | 1 |
| 7W***92 | Plug-Pipe; (1/2-14 Nptf Thd)(Use Without Air Compressor) | 1 |
209-4600 Pump Gp-Water -Coolant
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 1 |
| 14***09 | Plug As-Sto | 1 |
| 14***11 | Plug Group | 1 |
227-4299 Pump Gp-Water -Coolant
| 14***88 | Seal As; (Water Pump) | 1 |
| 17***52 | Shaft As | 1 |
| 17***58 | Plug | 1 |
333-3775 Radiator Gp
| 10***29 | Hose; (60-cm) | 0 |
| 15***83 | Washer-Hard; (8.4x35x2.5-mm Thk) | 18 |
| 17***94 | Bolt; (M8x1.25x16-mm) | 1 |
338-3155 Tank Gp-Expansion
| 33***55 | Tank Group-Expansion | 1 |
| 35***86 | Hose; (Vent) | 1 |
| 35***87 | Hose | 2 |
Electrical And Starting System
333-8420 Alternator Gp-Charging
| 12***58 | Pulley-Alternator; (8-Groove) | 1 |
| 21***22 | Belt-Serpentine | 1 |
| 33***20 | Alternator Group-Charging | 1 |
333-3898 Battery & Wiring Gp
| 15***20 | Battery; (12-Volt)(12-Volt) | 2 |
| 16***82 | Switch As-Disconnect | 1 |
| 1M***19 | Bolt; (5/16-18x1.375-In)(5/16-18x1.375 In) | 1 |
241-7602 Control & Mtg Gp-Engine Elek
| 10***28 | Spacer-Special; (12.7x26x28.7-mm Thk) | 4 |
| 13***00 | Clip; (Tab) | 1 |
| 14***92 | Stud; (M8x1.25-Thd) | 4 |
333-3888 Electrical Ar
| 33***70 | Wiring Group-Rear | 1 |
| 33***80 | Wiring Group-Front | 1 |
| 33***88 | Electrical Ar | 1 |
142-8333 Fastener Gp-Ground Stud
| 14***33 | Fastener Group-Ground Stud | 1 |
| 5P***70 | Nut-Hard; (M8 X 1.25) | 1 |
| 6V***64 | Washer-Hard; (8.8x25.5x5-mm Thk) | 1 |
345-0807 Heater Gp-Jacket Water
| 34***07 | Heater Group-Jacket Water | 1 |
| 35***04 | Timer; (24-Volt) | 1 |
223-9664 Lamp Gp-Flood
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***82 | Screw; (7.4x20-mm) | 2 |
| 16***56 | Bracket; (Lamp Retaining) | 1 |
319-7380 Lamp Gp-Flood -Hid
| 22***74 | Bezel; (Hid) | 1 |
| 29***60 | Lamp; (24-Volt, Hid) | 1 |
| 29***43 | Lens | 1 |
219-6485 Lamp Gp-Flood
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 17***91 | Bracket Assem. | 1 |
| 17***92 | Body Assem. | 1 |
333-3803 Lighting Gp-Flood
| 17***36 | Nut-Hex Flange; (M8x1.25-Thd)(M8x1.25) | 13 |
| 21***85 | Lamp Group-Flood; -24-Volt-Front | 2 |
| 22***64 | Lamp Group-Flood | 8 |
333-3808 Lighting Gp-Flood
| 17***36 | Nut-Hex Flange; (M8x1.25-Thd)(M8x1.25) | 13 |
| 31***80 | Lamp Group-Flood; -Hid | 10 |
| 33***08 | Lighting Group-Flood | 1 |
344-0035 Panel Gp-Circuit Breaker
| 34***35 | Panel Group-Circuit Breaker | 1 |
338-2891 Panel Gp-Circuit Breaker
| 33***91 | Panel Group-Circuit Breaker | 1 |
333-3823 Preheater Gp-Machine
| 03***31 | Elbow-To Tube As | 5 |
| 06***55 | Elbow | 1 |
| 10***73 | Clip | 1 |
333-3848 Preheater Gp-Machine
| 03***31 | Elbow-To Tube As | 1 |
| 12***49 | Lockwasher | 1 |
| 18***14 | Nut; (1-11/16-18-Thd) | 1 |
352-1490 Sensor Gp-Engine
| 16***61 | Plug As | 1 |
| 18***06 | Plug As; (High Temperature) | 1 |
| 18***63 | Plug Group | 1 |
239-2396 Sensor Gp-Pressure
| 19***25 | Sensor Group-Pressure; -Engine Oil | 1 |
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
| 23***96 | Sensor Group-Pressure; -Engine Oil, Fuel | 1 |
267-1402 Sensor Gp-Pressure
| 21***67 | Seal-O-Ring | 1 |
| 24***69 | Sensor Group-Pressure | 1 |
| 26***02 | Sensor Group-Pressure; -Injection Actuation | 1 |
276-9067 Sensor Gp-Pressure
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
| 23***27 | Plug As-Connector; (3-Pin) | 1 |
| 27***19 | Sensor Group-Pressure; (Engine Block Oil Inlet) | 1 |
303-3357 Sensor Gp-Pressure
| 29***60 | Sensor Group-Pressure | 1 |
| 30***57 | Sensor Group-Pressure; -Atmospheric, . Spring | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 1 |
266-8650 Sensor Gp-Pressure
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
| 26***50 | Sensor Group-Pressure; -Intake Manifold Air | 1 |
| 27***93 | Sensor Group-Pressure; (Water Jacket Outlet) | 1 |
194-6725 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
| 19***25 | Sensor Group-Pressure; -Engine Oil | 1 |
236-6221 Sensor Gp-Speed -Engine Timing
| 23***21 | Sensor Group-Speed; -Engine Timing | 1 |
| 24***30 | Sensor Group-Speed; -Engine Timing | 1 |
| 3P***47 | Seal-O-Ring (Id=13.94mm); (13.949mm Id) | 2 |
234-5012 Sensor Gp-Temperature
| 23***12 | Sensor Group-Temperature; -Coolant, Water | 1 |
| 25***53 | Sensor As-Temperature; (Torque Converter Outlet Oil) | 1 |
| 6V***09 | Seal-O-Ring (Id=16.36mm); (16.36-mm Id) | 1 |
234-5013 Sensor Gp-Temperature
| 23***13 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
| 23***80 | Seal-O-Ring | 1 |
| 25***53 | Sensor As-Temperature; (Torque Converter Outlet Oil) | 1 |
118-7284 Starting Aid Gp -Air Inlet Heater
| 11***84 | Starting Aid Group; -Air Inlet Heater | 1 |
| 15***37 | Heater As-Air Inlet; (22-Volt, 1892-Watt)(Starting Aid) | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
207-1541 Starting Motor Gp-Electric
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***02 | Housing As | 1 |
| 20***41 | Starting Motor Group-Electric | 1 |
132-1418 Starting Motor Gp-Electric
| 10***08 | Bolt (M10x1.5x35mm); (M10x1.5x35-mm) | 3 |
| 13***18 | Starting Motor Group-Electric | 1 |
| 13***30 | Wire As | 1 |
172-8660 Switch Gp-Liquid Level
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***60 | Switch Group-Liquid Level; -Rear Engine Oil-Ster, Hydraulic Fan Oil-Engine On-Steering Oil, Engine Off-Auxiliary Coolant-Front Engine Oil-Brake Oil, Hoist-Engine Coolant-Tc Oil-Low, Cold | 1 |
| 9X***01 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 2 |
209-5582 Switch Gp-Magnetic
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 20***82 | Switch Group-Magnetic; -Starting Aid Heater Relay-Air Inlet Heater Relay | 1 |
| 3F***56 | Lockwasher; (8.43x15.5x0.76mm Thk) | 2 |
298-3802 Switch Gp-Push Button
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 10***07 | Switch-Operator; (Secondary Stop Push Button) | 1 |
| 11***14 | End-Wire; (18-Ga) | 8 |
342-9299 Wiring Gp-Cab
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***07 | Screw-Hex Socket; (M4x0.7x20-mm) | 8 |
| 15***79 | Nut; (U-Type Retainer) | 8 |
333-7804 Wiring Gp-Cab
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***87 | Start Switch Assembly; (Key)(Engine) | 1 |
| 11***11 | Socket-Auxiliary Power; (12-Volt)(Power Port) | 2 |
333-8590 Wiring Gp-Engine
| 17***36 | Nut-Hex Flange; (M8x1.25-Thd)(M8x1.25) | 4 |
| 17***20 | Strap-Dual Clamp | 2 |
| 18***43 | Locknut; (M10x1.5-Thd) | 1 |
352-3581 Wiring Gp-Engine
| 10***20 | Plug As-Connector; (2-Pin) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
333-3880 Wiring Gp-Front
| 06***45 | Clip | 1 |
| 15***50 | Cable; (00-Ga, Black)(183-cm Each) | 0 |
| 18***34 | Spacer; (0.438x1x0.5-In Thk) | 1 |
283-7992 Wiring Gp-Heater -Air Inlet Manifold
| 03***12 | Terminal-Ring; (2-Ga, 1/4-In Screw)(Circuit Breaker) | 1 |
| 13***43 | Boot; (Red)(Red) | 2 |
| 19***06 | Strap-Grounding | 1 |
333-3902 Wiring Gp-Horn
| 33***02 | Wiring Group-Horn | 1 |
| 33***92 | Horn As; (24-Volt, Two Tone) | 1 |
| 33***91 | Harness As-Wiring; (Firewall) | 1 |
333-3905 Wiring Gp-Hydraulic Tank
| 17***20 | Strap-Dual Clamp | 1 |
| 18***82 | Screw-Pan Head; (M6x1x16-mm) | 2 |
| 22***89 | Plug; (Rocker Switch)(Rocker Switch) | 1 |
333-3870 Wiring Gp-Rear
| 12***85 | Plug As-Connector; (1-Pin) | 1 |
| 12***86 | Receptacle As-Connector; (1-Pin) | 1 |
| 17***36 | Nut-Hex Flange; (M8x1.25-Thd)(M8x1.25) | 1 |
Engine Arrangement
329-5698 Engine Ar-Complete
| 11***70 | Fastener Group-Lifting; -Engine, Rear | 1 |
| 11***56 | Fastener Group-Front Housing; (Housing) | 1 |
| 11***10 | Cover Group-Fuel Filter Base | 1 |
331-9851 Engine Ar-Core
| 11***43 | Cooler Group-Engine Oil | 1 |
| 16***46 | Housing Group-Front | 1 |
| 19***61 | Lines Group-Injector Hydraulic Pump | 1 |
333-3749 Installation Ar-Engine
| 33***35 | Compressor & Mtg Group-Refrig | 1 |
| 33***49 | Installation Ar-Engine | 1 |
| 33***50 | Mounting Group-Engine | 1 |
Frame And Body
333-3796 Bunk Ar -Standard
| 33***96 | Bunk Ar; -Standard | 1 |
| 33***56 | Gate Group | 1 |
| 33***81 | Bunk Group; -Standard | 4 |
333-3797 Bunk Ar -Wide
| 33***97 | Bunk Ar; -Wide | 1 |
| 33***56 | Gate Group | 1 |
| 33***81 | Bunk Group; -Wide | 4 |
333-8281 Bunk Gp -Wide
| 33***81 | Bunk Group; -Wide | 1 |
| 34***72 | Bunk As | 1 |
| 34***73 | Bunk As; (Extension) | 2 |
333-7781 Bunk Gp -Standard
| 33***81 | Bunk Group; -Standard | 1 |
| 34***72 | Bunk As | 1 |
| 34***68 | Tube | 2 |
333-3753 Frame Gp-Front -Without Blade
| 33***53 | Frame Group-Front; -Without Blade | 1 |
| 33***41 | Frame As; (Engine End) | 1 |
333-3752 Frame Gp-Front
| 33***52 | Frame Group-Front | 1 |
| 33***39 | Frame As-Front; (Blade) | 1 |
333-3787 Frame Gp-Rear
| 33***53 | Frame Group-Front; -Without Blade | 1 |
| 33***87 | Frame Group-Rear | 1 |
| 33***35 | Valve & Mtg Group-Steering | 1 |
333-3758 Frame Gp-Rear
| 33***58 | Frame Group-Rear | 1 |
| 33***36 | Frame As | 1 |
| 33***46 | Frame As; (Extension) | 1 |
333-3901 Guard Gp-Axle -6wd
| 20***10 | Bolt-Flange Head | 12 |
| 33***01 | Guard Group-Axle; -6wd | 1 |
| 34***17 | Bolt-Flange Head; (M16x2x40-mm) | 4 |
333-3900 Guard Gp-Bottom -8wd
| 33***00 | Guard Group-Bottom; -8wd | 1 |
| 33***99 | Guard; (Front Axle) | 1 |
| 34***17 | Bolt-Flange Head; (M16x2x40-mm) | 4 |
338-3060 Guard Gp-Bottom
| 33***60 | Guard Group-Bottom | 1 |
| 34***17 | Bolt-Flange Head; (M16x2x40-mm) | 4 |
| 34***02 | Guard As | 1 |
357-9648 Guard Gp-Bottom
| 34***15 | Bolt-Flange Head; (M12x1.75x25-mm) | 18 |
| 34***10 | Plate | 1 |
| 35***96 | Guard As | 1 |
338-3000 Guard Gp-Bottom
| 33***00 | Guard Group-Bottom | 1 |
| 34***15 | Bolt-Flange Head; (M12x1.75x25-mm) | 22 |
| 34***10 | Plate | 1 |
333-3879 Guard Gp-Brush
| 18***83 | Nut-Hex Flange; (M12x1.75-Thd) | 2 |
| 20***50 | Bolt-Shoulder | 2 |
| 23***89 | Nut-Flange; (1/2-13-Thd) | 2 |
338-3201 Guard Gp-Cab
| 17***19 | Lock | 3 |
| 27***71 | Cam-Latch | 3 |
| 33***01 | Guard Group-Cab | 1 |
357-5408 Guard Gp-Cylinder
| 19***19 | Lockwasher | 4 |
| 35***83 | Bolt | 4 |
| 35***11 | Fitting-Grease | 1 |
358-2015 Guard Gp-Lines
| 35***77 | Bolt | 10 |
| 35***97 | Nut | 10 |
| 35***15 | Guard Group-Lines | 1 |
333-7752 Guard Gp-Lines
| 33***52 | Guard Group-Lines | 1 |
| 33***06 | Band | 4 |
| 34***13 | Bolt-Flange Head; (M10x1.5x20-mm) | 4 |
333-8433 Guard Gp-Rear
| 17***19 | Lock | 1 |
| 27***71 | Cam-Latch | 1 |
| 33***33 | Guard Group-Rear | 1 |
333-3750 Hitch Gp-Articulating & Osc
| 02***87 | Fitting-Grease; (Universal Joint) | 2 |
| 33***50 | Hitch Group-Articulating & Osc | 1 |
| 33***05 | Bearing | 1 |
333-3825 Hitch Gp-Towing
| 33***25 | Hitch Group-Towing | 1 |
| 33***97 | Hitch As | 1 |
| 8T***23 | Washer-Plated; (22x35x3.5-mm Thk) | 6 |
333-3790 Hood Gp
| 01***37 | Clevis-Adjustable | 1 |
| 17***25 | Pin; (Snap) | 2 |
| 18***83 | Nut-Hex Flange; (M12x1.75-Thd) | 2 |
333-3820 Ladder Gp
| 00***00 | Ring-Snap | 4 |
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 17***45 | Bolt-Shoulder; (M12x1.75x18-mm) | 4 |
333-8544 Lines Gp-Grease
| 02***87 | Fitting-Grease; (Universal Joint) | 4 |
| 18***34 | Spacer; (0.438x1x0.5-In Thk) | 1 |
| 33***44 | Lines Group-Grease | 1 |
333-8545 Lines Gp-Grease
| 2N***87 | Elbow-Flared Needed For Customer; (Used Without Brakesaver) | 2 |
| 33***45 | Lines Group-Grease | 1 |
| 33***53 | Hose As | 1 |
333-3762 Link Gp-Steering Frame Lock
| 28***91 | Pin | 2 |
| 33***62 | Link Group-Steering Frame Lock | 1 |
| 34***69 | Link | 1 |
338-3079 Pin Gp-Hitch -Expandable, Center Bottom
| 33***79 | Pin Group-Hitch; -Expandable, Center Bottom | 1 |
| 35***97 | Sleeve | 2 |
| 35***99 | Bolt | 2 |
338-3080 Pin Gp-Hitch -Expandable, Center Top
| 14***69 | Bolt; (M36x3x80-mm) | 1 |
| 33***80 | Pin Group-Hitch; -Expandable, Center Top | 1 |
| 35***96 | Sleeve | 1 |
350-1333 Platform Gp-Service
| 35***33 | Platform Group-Service | 1 |
| 35***96 | Nut | 4 |
| 35***01 | Washer | 8 |
Fuel System
116-5410 Cover Gp-Fuel Filter Base
| 11***10 | Cover Group-Fuel Filter Base | 1 |
| 1P***36 | Gasket; (Fuel Priming Pump)(Fuel Priming Pump) | 1 |
| 5P***37 | Washer 5t***54 Plate To 7t***28 Cable As | 1 |
201-5949 Filter Gp-Fuel
| 11***23 | Insert-Fuel Filter | 1 |
| 14***38 | Base As-Fuel Filter | 1 |
| 16***02 | Bracket | 1 |
282-9942 Filter Gp-Primary Fuel
| 03***94 | Connector-Flared | 1 |
| 22***05 | Filter Group-Water Sep & Fuel | 1 |
| 23***77 | Hose As | 1 |
174-9570 Filter Gp-Water Sep & Fuel
224-9105 Filter Gp-Water Sep & Fuel
| 13***41 | Pump Group-Fuel Priming; (Hand) | 1 |
| 17***70 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 1B***90 | Bolt; (5/16-18x1.375-In)(Rh Front Cover) | 1 |
328-2586 Injector Gp-Fuel
| 10***07 | Seal-O-Ring; (Fuel System) | 1 |
| 14***03 | Seal-O-Ring; (Fuel System) | 2 |
| 14***40 | Ring-Backup; (37.36mm Od), Flasher Switch; Hazard, Replaces 421164a1, Flasher Switch | 1 |
333-3774 Lines Gp-Fuel
| 11***28 | Elbow; (90-Deg) | 1 |
| 12***10 | Hose-Hydraulic; (190-cm) | 0 |
| 14***90 | Elbow Group | 1 |
333-3770 Lines Gp-Fuel
| 20***98 | Bolt-Flange Head | 1 |
| 21***34 | Clamp | 2 |
| 33***70 | Lines Group-Fuel | 1 |
272-5868 Lines Gp-Fuel Filter
| 03***88 | Connector-Tube Assembly To Main Relief | 1 |
| 14***33 | Tube As | 1 |
| 18***08 | Plug As; (High Temperature) | 1 |
191-0461 Lines Gp-Injector Hyd Pump
| 19***61 | Lines Group-Injector Hydraulic Pump | 1 |
| 19***23 | Adapter Group-Oil Line; -Fuel Injection Pump-Unit Injector Hydraulic Pump | 1 |
| 20***80 | Hose As | 1 |
222-5900 Pump & Mtg Gp-Unit Inj Hyd
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
| 22***00 | Pump & Mtg Group-Unit Inj Hydraulic | 1 |
| 22***04 | Seal-O-Ring; (Unit Injector Hydraulic Pump) | 1 |
268-1840 Pump Gp-Fuel Injection
| 23***51 | Bolt-Socket Head; (M8x1.25x65-mm) | 2 |
| 26***40 | Pump Group-Fuel Injection | 1 |
| 32***86 | Injector Group-Fuel | 1 |
338-3086 Pump Gp-Fuel Transfer
| 33***86 | Pump Group-Fuel Transfer | 1 |
| 35***19 | Kit-Service | 1 |
| 35***66 | Rotor | 1 |
333-3886 Pump Gp-Fuel Transfer
| 10***09 | Connector | 1 |
| 14***55 | Elbow As. | 1 |
| 15***52 | Connector As | 1 |
319-0677 Pump Gp-Unit Injector Hyd
| 15***36 | Cartridge | 1 |
| 17***28 | Seal-O-Ring; (Fuel Transfer Pump) | 1 |
| 1F***60 | Washer Roll-Over Group To Deck | 1 |
220-6214 Pump Gp-Unit Injector Hyd
| 16***97 | Seal | 3 |
| 16***36 | Bolt-Socket Head; (M5x0.8x18-mm) | 3 |
| 17***44 | Bolt | 4 |
304-0677 Pump Gp-Unit Injector Hyd
| 17***57 | Pump Group-Fuel Transfer | 1 |
| 17***28 | Seal-O-Ring; (Fuel Transfer Pump) | 1 |
| 22***04 | Seal-O-Ring; (Unit Injector Hydraulic Pump) | 1 |
254-4357 Pump Gp-Unit Injector Hyd
| 17***57 | Pump Group-Fuel Transfer | 1 |
| 17***28 | Seal-O-Ring; (Fuel Transfer Pump) | 1 |
| 22***04 | Seal-O-Ring; (Unit Injector Hydraulic Pump) | 1 |
295-4777 Pump Gp-Unit Injector Hyd
| 17***57 | Pump Group-Fuel Transfer | 1 |
| 17***28 | Seal-O-Ring; (Fuel Transfer Pump) | 1 |
| 22***04 | Seal-O-Ring; (Unit Injector Hydraulic Pump) | 1 |
312-0677 Pump Gp-Unit Injector Hyd
| 16***36 | Bolt-Socket Head; (M5x0.8x18-mm) | 3 |
| 17***57 | Pump Group-Fuel Transfer | 1 |
| 17***28 | Seal-O-Ring; (Fuel Transfer Pump) | 1 |
205-1306 Regulator Gp-Fuel Pressure
| 19***38 | Elbow Assem. | 0 |
| 20***06 | Name-Plate (Portuguese), Regulator Group-Fuel Pressure | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
232-0343 Regulator Gp-Fuel Pressure
| 23***43 | Regulator Group-Fuel Pressure | 1 |
| 29***20 | Regulator As; (Fuel Pressure) | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 1 |
333-3760 Tank Gp-Fuel
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 19***65 | Clip | 1 |
333-3780 Tank Gp-Fuel
| 15***74 | Kit-Connecting Plug; (6-Pin)(Cat Electronic Display Harness) | 1 |
| 33***80 | Tank Group-Fuel | 1 |
| 33***81 | Gasket | 1 |
Hydraulic System
357-1063 Bracket Gp-Mounting
| 35***78 | Kit-Bracket; (Main Control Valve) | 1 |
| 35***49 | Kit-Seal; (Main Control Valve) | 2 |
| 35***62 | Kit-Tie Rod; (Main Control Valve) | 1 |
357-1065 Bracket Gp-Mounting
| 35***48 | Kit-Bracket | 1 |
| 35***49 | Kit-Seal; (Main Control Valve) | 3 |
| 35***50 | Kit-Fastener | 1 |
357-1067 Bracket Gp-Mounting
| 35***78 | Kit-Bracket; (Main Control Valve) | 1 |
| 35***79 | Kit-Fastener | 1 |
| 35***49 | Kit-Seal; (Main Control Valve) | 4 |
352-7839 Cover Gp-Valve End
| 35***39 | Cover Group-Valve End | 1 |
| 35***40 | Bolt As | 1 |
| 35***41 | Plug | 2 |
333-7749 Cylinder & Mtg Gp-Blade
| 2D***67 | Fitting-Grease; (Fan Drive) | 4 |
| 33***49 | Cylinder & Mtg Group-Blade | 1 |
| 33***41 | Cylinder Group-Blade | 2 |
333-3847 Cylinder & Mtg Gp-Hydraulic
| 2D***67 | Fitting-Grease; (Fan Drive) | 4 |
| 33***47 | Cylinder & Mtg Group-Hydraulic | 1 |
| 33***44 | Cylinder Group-Hydraulic | 2 |
333-3846 Cylinder & Mtg Gp-Steering
| 2D***67 | Fitting-Grease; (Fan Drive) | 2 |
| 33***46 | Cylinder & Mtg Group-Steering | 1 |
| 33***95 | Bearing-Aligning | 4 |
338-2941 Cylinder Gp-Blade
| 33***41 | Cylinder Group-Blade | 1 |
| 34***17 | Ring-Guide | 2 |
| 34***20 | Bearing-Sleeve | 1 |
358-3871 Cylinder Gp-Boom
| 18***34 | Nut-Flange; (5/8-18-Thd) | 2 |
| 34***99 | Cylinder Group-Cab Tilt | 1 |
| 34***37 | Bolt-Special | 2 |
355-8635 Cylinder Gp-Boom
| 34***17 | Ring-Guide | 2 |
| 34***20 | Bearing-Sleeve | 2 |
| 34***24 | Bushing | 1 |
333-8549 Cylinder Gp-Cab Tilt
| 1K***72 | Locknut Horn To Guard | 1 |
| 33***49 | Cylinder Group-Cab Tilt | 1 |
| 35***96 | Kit-Seal | 1 |
345-2399 Cylinder Gp-Cab Tilt
| 34***99 | Cylinder Group-Cab Tilt | 1 |
| 35***88 | Cylinder As | 1 |
| 35***89 | Rod As | 1 |
357-5419 Cylinder Gp-Extendable Stick
| 18***16 | Fitting-Grease | 2 |
| 35***36 | Kit-Seal | 1 |
| 35***12 | Cylinder As | 1 |
350-0086 Cylinder Gp-Extendable Stick
| 35***86 | Cylinder Group-Extendable Stick | 1 |
| 35***94 | Sleeve-Stop | 1 |
| 35***95 | Guide | 3 |
351-6223 Cylinder Gp-Grapple
| 20***63 | Fitting-Grease | 2 |
| 35***37 | Kit-Seal | 1 |
| 35***11 | Seal | 1 |
351-6226 Cylinder Gp-Grapple
| 2K***37 | Nut (National Fine); (3/4-16-Thd) | 1 |
| 35***57 | Kit-Seal | 1 |
| 35***26 | Cylinder Group-Grapple | 1 |
338-2944 Cylinder Gp-Hydraulic
| 33***44 | Cylinder Group-Hydraulic | 1 |
| 35***87 | Kit-Seal; (Piston) | 1 |
| 35***88 | Kit-Seal; (Head)(Head) | 1 |
338-2942 Cylinder Gp-Hydraulic
| 33***42 | Cylinder Group-Hydraulic | 1 |
| 35***50 | Rod As | 1 |
| 35***52 | Kit-Seal; (Rod) | 1 |
338-2926 Cylinder Gp-Hydraulic
| 33***26 | Cylinder Group-Hydraulic | 1 |
| 35***58 | Piston As | 1 |
| 35***59 | Guide-Rod | 1 |
360-1410 Cylinder Gp-Steering
| 35***52 | Kit-Seal; (Rod) | 1 |
| 35***53 | Kit-Seal; (Bore) | 1 |
| 35***54 | Locknut | 1 |
338-2945 Cylinder Gp-Steering -Steering, Rh
| 03***69 | Setscrew-Socket; (1/4-20x0.38-In) | 2 |
| 33***45 | Cylinder Group-Steering; (Steering, Rh)(Rh) | 1 |
| 35***88 | Kit-Seal; (Head)(Head) | 1 |
338-3026 Filter Gp-Oil
| 33***85 | Pump & Mtg Group-Hydraulic | 1 |
| 33***46 | Cylinder & Mtg Group-Steering | 1 |
| 33***47 | Cylinder & Mtg Group-Hydraulic | 1 |
333-8555 Hydraulic Ar
| 17***20 | Strap-Dual Clamp | 2 |
| 18***43 | Locknut; (M10x1.5-Thd) | 4 |
| 33***38 | Lines Group-Hydraulic | 1 |
333-3937 Lines Gp-Blade Cylinder
| 33***37 | Lines Group-Blade Cylinder | 1 |
| 34***72 | Bracket As | 3 |
| 34***73 | Bracket As | 2 |
358-1587 Lines Gp-Boom
| 11***70 | Valve-Check | 1 |
| 12***76 | Kit-Seal; (Counterbalance Valve) | 1 |
| 33***00 | Lines Group-Hydraulic; -Cab Tilt | 1 |
357-5406 Lines Gp-Cylinder
| 35***09 | Guard | 1 |
| 35***10 | Plate-Clamp | 1 |
| 35***11 | Plate-Clamp | 2 |
338-3084 Lines Gp-Cylinder
| 33***84 | Lines Group-Cylinder | 1 |
| 35***71 | Bolt | 1 |
| 35***95 | Nut | 1 |
350-1374 Lines Gp-Extendable Stick
| 35***12 | Plate-Clamp | 2 |
| 35***25 | Plate | 4 |
| 35***74 | Lines Group-Extendable Stick | 1 |
358-2321 Lines Gp-Extendable Stick
| 14***28 | Connector Assem. | 2 |
| 14***45 | Connector As | 2 |
| 14***70 | Elbow, 90°,-8 Orb Swiv. /-8 Orfs | 2 |
333-3938 Lines Gp-Hydraulic
| 14***27 | Connector Group | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 2 |
| 14***41 | Connector Group | 2 |
338-3100 Lines Gp-Hydraulic -Cab Tilt
| 14***28 | Connector Assem. | 2 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 4 |
| 14***54 | Elbow; (45) (-8/-8 Orb/Orfs) | 3 |
333-8552 Lines Gp-Hydraulic -Tank Fill
| 14***68 | Elbow Group | 1 |
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 1 |
| 15***29 | Tee As | 2 |
333-8321 Lines Gp-Hydraulic
| 10***36 | Hose As | 1 |
| 11***66 | Seal-O-Ring | 1 |
| 12***11 | Hose-Hydraulic; (146-cm) | 0 |
333-8331 Lines Gp-Hydraulic
| 14***27 | Connector Group | 1 |
| 14***55 | Union As | 1 |
| 16***09 | Union As | 1 |
333-8547 Lines Gp-Hydraulic Control
| 21***34 | Clamp | 1 |
| 33***87 | Lines Group-Hydraulic Fan | 1 |
| 33***47 | Lines Group-Hydraulic Control | 1 |
333-8282 Lines Gp-Hydraulic Fan
| 14***15 | Connector As | 1 |
| 14***27 | Connector Group | 1 |
| 14***39 | Connector As. | 2 |
333-8287 Lines Gp-Hydraulic Fan
| 15***52 | Clamp-Half | 10 |
| 33***87 | Lines Group-Hydraulic Fan | 1 |
| 33***23 | Lines Group-Hydraulic Oil Cooler | 1 |
333-8323 Lines Gp-Hydraulic Oil Cooler
| 20***96 | Bolt-Flange Head; (M10x1.5x45-mm) | 1 |
| 33***23 | Lines Group-Hydraulic Oil Cooler | 1 |
| 33***83 | Lines Group-Ladder | 1 |
333-8322 Lines Gp-Hydraulic Oil Cooler
| 11***49 | Fitting As; (Quick Disconnect) | 2 |
| 1P***79 | Flange (Half) | 18 |
| 1P***82 | Flange-Half | 2 |
333-8382 Lines Gp-Ladder
| 14***68 | Elbow Group | 1 |
| 14***77 | Elbow As. | 1 |
| 33***82 | Lines Group-Ladder | 1 |
333-8383 Lines Gp-Ladder
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
| 14***54 | Elbow; (45) (-8/-8 Orb/Orfs) | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
333-8548 Lines Gp-Lift Cylinder
| 15***94 | Adapter As | 2 |
| 15***44 | Seal | 1 |
| 16***43 | Seal | 1 |
333-8572 Lines Gp-Log Loader
| 08***53 | Bolt; (1/4-20x0.62-In) | 2 |
| 09***55 | Breather; (Hydraulic Tank) | 1 |
| 17***05 | Elbow | 1 |
333-8571 Lines Gp-Log Loader
| 14***70 | Elbow, 90°,-8 Orb Swiv. /-8 Orfs | 1 |
| 15***37 | Tee As. | 2 |
| 29***46 | Hose As; (Swing Left) | 1 |
333-8319 Lines Gp-Pump
| 20***96 | Bolt-Flange Head; (M10x1.5x45-mm) | 1 |
| 33***19 | Lines Group-Pump | 1 |
| 33***21 | Lines Group-Hydraulic | 1 |
333-8320 Lines Gp-Steering
| 12***51 | Kit-Seal; (Pressure Relief Valve) | 1 |
| 31***60 | Seal Group | 3 |
| 33***20 | Lines Group-Steering | 1 |
338-3054 Manifold Gp-Control
| 33***54 | Manifold Group-Control | 1 |
| 33***89 | Pump Group-Gear | 1 |
| 7X***66 | Capscrew; (Hex Hd) (3/4-10x2 Gd 8 Z) (Current Adapters) | 4 |
333-3890 Pump & Mtg Gp-Hydraulic
| 1G***88 | Seal-O-Ring | 1 |
| 33***90 | Pump & Mtg Group-Hydraulic | 1 |
| 33***87 | Pump Group-Piston | 1 |
333-3785 Pump & Mtg Gp-Hydraulic
| 11***77 | Bolt; (M16x2x65-mm) | 2 |
| 33***85 | Pump & Mtg Group-Hydraulic | 1 |
| 33***88 | Pump Group-Hydraulic; (Hydrostatic) | 1 |
333-8377 Pump & Mtg Gp-Hydraulic Fan
| 09***75 | Seal - O-Ring (7.80 mm Id) | 7 |
| 09***80 | Seal-O-Ring (Id=11.80mm) | 2 |
| 09***87 | Seal-O-Ring (Id=20.80mm) | 1 |
338-3089 Pump Gp-Gear
| 17***36 | Nut-Hex Flange; (M8x1.25-Thd)(M8x1.25) | 4 |
| 23***01 | Valve Group-Check | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
338-3088 Pump Gp-Hydraulic
| 23***86 | Kit-Bearing; (Generator Pump) | 1 |
| 23***87 | Kit-Bearing; (Generator Pump) | 1 |
| 23***73 | Seal-O-Ring | 6 |
333-8551 Pump Gp-Hydraulic Tank Fill
| 33***51 | Pump Group-Hydraulic Tank Fill | 1 |
| 35***07 | Grill | 1 |
| 35***08 | Gasket | 1 |
338-3087 Pump Gp-Piston
| 16***73 | Sensor-Temperature; (Transmission Gearbox Oil) | 1 |
| 17***60 | Switch Group-Liquid Level; -Rear Engine Oil-Ster, Hydraulic Fan Oil-Engine On-Steering Oil, Engine Off-Auxiliary Coolant-Front Engine Oil-Brake Oil, Hoist-Engine Coolant-Tc Oil-Low, Cold | 1 |
| 30***06 | Screw; (M10x1.5x16-mm) | 8 |
338-3090 Pump Gp-Vacuum
| 33***47 | Lines Group-Hydraulic Control | 1 |
| 33***83 | Valve Group-Control | 1 |
| 33***90 | Pump Group-Vacuum | 1 |
333-8533 Tank Gp-Hydraulic
| 18***43 | Locknut; (M10x1.5-Thd) | 4 |
| 33***33 | Tank Group-Hydraulic | 1 |
| 33***31 | Valve Group-Steering | 1 |
333-8546 Valve & Lines Gp-Hyd Control
| 33***46 | Valve & Lines Group-Hydraulic Control | 1 |
| 35***33 | Valve Group-Control | 1 |
| 35***34 | Valve Group-Control | 1 |
333-3935 Valve & Mtg Gp-Steering
| 33***35 | Valve & Mtg Group-Steering | 1 |
| 35***49 | Kit-Shim | 1 |
| 35***50 | Kit-Repair | 1 |
338-3135 Valve Gp-Blade Control
| 12***51 | Kit-Seal; (Pressure Relief Valve) | 4 |
| 14***88 | Kit-Seal; (Ride Control, Switch) | 4 |
| 14***89 | Kit-Seal | 3 |
338-3050 Valve Gp-Brake Control
| 17***00 | Valve Group-Flow Control; (Pilot Supply)(Inlet) | 1 |
| 17***54 | Plug | 1 |
| 33***50 | Valve Group-Brake Control | 1 |
352-7628 Valve Gp-Control
| 17***85 | Kit-Seal; (Main Control Valve) | 1 |
| 35***86 | Bracket Group-Mounting | 1 |
| 35***90 | Connector As | 1 |
352-7648 Valve Gp-Control
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 13***13 | Bolt-Socket Head; (M6x1x30-mm) | 3 |
| 17***59 | Valve Group-Solenoid; (Control Valve) | 2 |
352-7834 Valve Gp-Control
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 13***13 | Bolt-Socket Head; (M6x1x30-mm) | 3 |
| 17***59 | Valve Group-Solenoid; (Control Valve) | 2 |
352-7649 Valve Gp-Control
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 13***13 | Bolt-Socket Head; (M6x1x30-mm) | 3 |
| 17***59 | Valve Group-Solenoid; (Control Valve) | 2 |
352-7651 Valve Gp-Control
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 13***13 | Bolt-Socket Head; (M6x1x30-mm) | 3 |
| 17***59 | Valve Group-Solenoid; (Control Valve) | 2 |
352-7833 Valve Gp-Control
| 13***45 | Seal Kit; (Includes Parts Marked J) | 1 |
| 35***13 | Coil | 2 |
| 35***14 | Cartridge | 2 |
352-7836 Valve Gp-Control
| 14***88 | Kit-Seal; (Ride Control, Switch) | 1 |
| 15***38 | Kit-Valve Seal | 1 |
| 27***38 | Kit-Seal | 2 |
352-7835 Valve Gp-Control
| 35***11 | Valve Group-Control; -Inlet | 1 |
| 35***13 | Valve Group-Control | 1 |
| 35***81 | Kit-Seal | 3 |
338-2983 Valve Gp-Control
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 12***45 | Seal-O-Ring; (25.3mm Id) | 1 |
352-7650 Valve Gp-Control
| 22***01 | Kit-Seal | 1 |
| 35***50 | Valve Group-Control | 1 |
| 35***26 | Plug As | 3 |
350-3513 Valve Gp-Control
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 16***37 | Valve Group-Relief; (Line) | 1 |
| 17***47 | Kit-Spring; (Control Valve) | 1 |
350-3511 Valve Gp-Control -Inlet
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 16***37 | Valve Group-Relief; (Line) | 2 |
| 17***47 | Kit-Spring; (Control Valve) | 1 |
352-7642 Valve Gp-Control
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 13***13 | Bolt-Socket Head; (M6x1x30-mm) | 3 |
| 17***59 | Valve Group-Solenoid; (Control Valve) | 2 |
338-3132 Valve Gp-Main Control
| 33***32 | Valve Group-Main Control | 1 |
| 35***81 | Valve-Solenoid | 1 |
338-3052 Valve Gp-Pump Control
| 33***52 | Valve Group-Pump Control | 1 |
| 35***33 | Valve Group-Control | 1 |
| 35***36 | Valve Group-Control | 1 |
338-3053 Valve Gp-Relief
| 33***53 | Valve Group-Relief | 1 |
| 34***48 | Cylinder As-Hydraulic | 4 |
| 34***49 | Piston | 4 |
338-3131 Valve Gp-Steering
| 33***31 | Valve Group-Steering | 1 |
| 34***79 | Boom As; (Outer) | 1 |
| 34***80 | Pin | 1 |
Implements
350-1360 Actuator Gp-Rotary
| 34***90 | Pad-Wear | 2 |
| 35***41 | Boom As; (Inner) | 1 |
| 35***42 | Pin As | 1 |
358-2459 Boom Gp -Outer
| 34***20 | Bearing-Sleeve | 2 |
| 34***11 | Boom As | 1 |
| 34***13 | Link As | 1 |
350-1370 Boom Gp -Outer
| 34***85 | Plate | 2 |
| 34***86 | Plate | 2 |
| 34***87 | Pad-Wear | 2 |
350-1376 Boom Gp -Inner
| 34***90 | Pad-Wear | 2 |
| 35***42 | Pin As | 1 |
| 35***43 | Cap | 1 |
358-2460 Boom Gp -Inner
| 34***92 | Boom As-Stub | 1 |
| 34***93 | Bushing | 2 |
| 34***94 | Bushing-Spacer | 1 |
350-1366 Boom Gp-Fore
| 34***17 | Pin As | 1 |
| 34***27 | Shim | 4 |
| 35***30 | Spacer | 1 |
350-1363 Boom Gp-Stub
| 34***17 | Pin As | 1 |
| 34***27 | Shim | 3 |
| 35***30 | Spacer | 1 |
358-2455 Mounting Gp-Stick
| 11***32 | Valve-Expansion | 1 |
| 23***78 | Grommet | 2 |
| 35***64 | Probe As | 1 |
350-1375 Mounting Gp-Stick
| 11***28 | Connector-Hose | 2 |
| 14***26 | Screw-Flat Head; (6-20x0.75-In) | 34 |
| 15***15 | Louver As-Vent | 8 |
Lubrication System
191-0523 Adapter Gp-Oil Line -Fuel Injection Pump
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 19***22 | Adapter | 1 |
| 19***23 | Adapter Group-Oil Line; -Fuel Injection Pump-Unit Injector Hydraulic Pump | 1 |
222-5946 Breather Gp
| 14***54 | Bolt; (M8x1.25x105-mm) | 1 |
| 16***10 | Breather As; (Crankcase) | 1 |
| 22***46 | Breather Group; -Crankcase | 1 |
7w-8798 Filler Gp-Engine Oil
| 13***19 | Seal-Integral; (Integral) | 1 |
| 5L***52 | Cap Assembly, Including:-; (Engine) | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 4 |
201-9775 Filter Gp-Engine Oil
| 1R***07 | Filter As-Engine Oil; (Advanced Efficiency) | 1 |
| 20***74 | Base As-Oil Filter; (Engine) | 1 |
| 20***75 | Filter Group-Engine Oil | 1 |
275-7798 Fumes Disposal Gp
| 20***68 | Spacer; (11x16x60-mm Thk) | 1 |
| 22***10 | Hose-Disposal; (Fumes Disposal) | 1 |
| 27***98 | Fumes Disposal Group | 1 |
238-8178 Gauge Gp-Oil Level (Dipstick) -Engine
| 17***94 | Gauge-Oil Level; (Dipstick)(Engine) | 1 |
| 1S***63 | Plug; (Mounted-Bottom | 3 |
| 23***78 | Gauge Group-Oil Level (Dipstick); -Engine | 1 |
7c-2475 Lines Gp-Engine Oil
| 3P***56 | Seal-O-Ring; (21.82mm Id) | 2 |
| 4W***32 | Elbow-Outlet | 1 |
| 6V***40 | Bolt (M8x1.25x25mm); (M8x1.25x25-mm) | 4 |
198-0030 Lines Gp-Turbocharger Oil
| 18***94 | Hose As-Oil Supply | 1 |
| 19***30 | Lines Group-Turbocharger Oil | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
192-2981 Pump Gp-Engine Oil
| 19***81 | Pump Group-Engine Oil | 1 |
| 20***97 | Pump Group-Engine Oil | 1 |
| 6V***15 | Bolt; (M10x1.5x75-mm) | 2 |
200-4497 Pump Gp-Engine Oil
| 18***77 | Pump Group-Engine Oil | 1 |
| 20***97 | Pump Group-Engine Oil | 1 |
| 7W***37 | Shaft-Oil Pump | 1 |
201-9777 Valve Gp-Fluid Sampling
| 20***77 | Valve Group-Fluid Sampling; -Engine Oil | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
Machine Arrangement
333-3777 Chassis Ar
| 33***50 | Hitch Group-Articulating & Osc | 1 |
| 33***58 | Frame Group-Rear | 1 |
| 33***60 | Tank Group-Fuel | 1 |
348-3034 Common Ar
| 32***98 | Engine Ar-Complete | 1 |
| 33***49 | Installation Ar-Engine | 1 |
| 33***77 | Chassis Ar | 1 |
348-3036 Common Ar
| 32***98 | Engine Ar-Complete | 1 |
| 33***49 | Installation Ar-Engine | 1 |
| 33***77 | Chassis Ar | 1 |
Operator Station
333-8424 Air Conditioner & Mounting Gp
| 12***45 | Screw | 6 |
| 22***73 | Plug | 2 |
| 33***24 | Air Conditioner & Mounting Group | 1 |
345-3030 Air Conditioner Gp
| 34***25 | Cab Group | 1 |
| 34***30 | Air Conditioner Group | 1 |
| 35***88 | Bolt; (M8x1.25x22-mm) | 1 |
344-0025 Cab Gp
| 33***33 | Compressor-Refrigerant | 1 |
| 34***25 | Cab Group | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
360-1375 Cab Gp
| 12***43 | Spring-Gas | 1 |
| 35***64 | Strap | 1 |
| 35***69 | Impellor, Tur Compre, Pin-Hinge | 2 |
333-3735 Compressor & Mtg Gp-Refrig
| 12***09 | Screw-Flat Head; (M10x1.5x20-mm) | 4 |
| 33***35 | Compressor & Mtg Group-Refrig | 1 |
| 35***64 | Strap | 1 |
352-4077 Door Gp-Cab -Rh
| 03***06 | Seal (Use As Required) | 1 |
| 19***86 | Adapter As | 1 |
| 20***72 | Plug As | 1 |
352-4076 Door Gp-Cab -Lh
| 03***31 | Elbow-To Tube As | 2 |
| 03***68 | Elbow | 2 |
| 20***98 | Bolt-Flange Head | 1 |
333-3765 Lines Gp-Air Conditioner
| 16***50 | Sleeve-Abrasion; (100-In Each) | 0 |
| 19***86 | Adapter As | 1 |
| 26***68 | Hose; (192-cm) | 0 |
338-2909 Lines Gp-Cab Heater
| 1Y***13 | Tee-Pipe | 1 |
| 33***09 | Lines Group-Cab Heater | 1 |
| 33***17 | Hose As | 1 |
338-2930 Lines Gp-Heater -Cold Weather
| 30***45 | Antenna As; (Sirius Satellite) | 1 |
| 32***12 | Cable As | 1 |
| 33***43 | Grommet | 1 |
333-8573 Lines Gp-Heater & Air Cond
| 11***25 | Screw-Flat Head; (M6x1x25-mm) | 3 |
| 20***50 | Bolt-Shoulder | 1 |
| 2J***50 | Ring-Retaining | 6 |
333-3809 Mounting Gp-Antenna
| 33***34 | Trim Group-Cab | 1 |
| 33***54 | Window Group-Cab | 1 |
| 33***95 | Mounting Group-Cab | 1 |
333-3795 Mounting Gp-Cab
| 33***95 | Mounting Group-Cab | 1 |
| 35***16 | Button-Push; (Hydraulic Oil Pressure) | 1 |
| 35***17 | Button-Push; (Turn Left, Right) | 2 |
333-7773 Operator Ar
| 18***12 | Bolt; (M20x1.5x52.5-mm) | 2 |
| 18***35 | Washer | 2 |
| 33***73 | Operator Ar | 1 |
345-1930 Panel Gp-Control
| 34***30 | Panel Group-Control | 1 |
| 35***88 | Bolt; (M8x1.25x22-mm) | 147 |
| 35***04 | Washer; (0.344x0.875x0.063-In Thk) | 147 |
338-3078 Pin Gp-Hinge
| 13***90 | Bushing; (Radio Mount) | 1 |
| 13***02 | Sleeve-Trim | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
357-1691 Plate Gp-Fops
| 34***46 | Seat Group-Suspension | 1 |
| 35***91 | Plate Group-Fops | 1 |
333-3813 Radio Gp
| 33***13 | Radio Group | 1 |
| 34***47 | Seat Group-Suspension | 1 |
333-3816 Seat Gp-Suspension
| 33***16 | Seat Group-Suspension | 1 |
| 35***05 | Headrest | 1 |
| 35***06 | Adjustment Group-Seat | 1 |
344-0047 Seat Gp-Suspension
| 11***58 | Washer; (6.5x17x1-mm Thk) | 90 |
| 12***07 | Screw-Hex Socket; (M4x0.7x20-mm) | 12 |
| 13***92 | Retainer-Captive | 36 |
344-0046 Seat Gp-Suspension
| 34***46 | Seat Group-Suspension | 1 |
| 35***64 | Pump-Washer; (24-Volt) | 3 |
| 35***65 | Grommet | 3 |
333-3817 Seat Gp-Suspension
| 33***17 | Seat Group-Suspension | 1 |
| 35***05 | Headrest | 1 |
| 35***06 | Adjustment Group-Seat | 1 |
344-0049 Tank Gp-Window Washer
| 12***07 | Screw-Hex Socket; (M4x0.7x20-mm) | 14 |
| 34***45 | Bracket; (Lh) | 1 |
| 34***48 | Bracket; (Lh) | 1 |
333-3734 Trim Gp-Cab
| 33***34 | Trim Group-Cab | 1 |
| 34***38 | Window; (Rear) | 1 |
| 34***41 | Window; (Door)(Rh, Lh) | 2 |
333-3815 Visor Gp-Cab
| 14***95 | Hose; (650-cm Each) | 0 |
| 17***94 | Bolt; (M8x1.25x16-mm) | 10 |
| 33***15 | Visor Group-Cab | 1 |
333-3754 Window Gp-Cab
| 14***95 | Hose; (650-cm Each) | 0 |
| 17***94 | Bolt; (M8x1.25x16-mm) | 12 |
| 33***54 | Window Group-Cab | 1 |
333-3819 Wiper & Washer Gp-Window -Front, Rear
| 33***19 | Wiper & Washer Group-Window; -Front, Rear | 1 |
| 35***90 | Adapter | 1 |
| 35***95 | Blade-Wiper; (26-Inch) | 1 |
333-3821 Wiper & Washer Gp-Window -Front, Rear, Side
| 33***21 | Wiper & Washer Group-Window; -Front, Rear, Side | 1 |
| 35***90 | Adapter | 1 |
| 35***91 | Shaft-Drive | 1 |
345-1680 Wiper Gp-Window -Lh
| 33***52 | Frame Group-Front | 1 |
| 33***36 | Blade Group-Decking | 1 |
| 33***37 | Lines Group-Blade Cylinder | 1 |
345-1679 Wiper Gp-Window -Front
| 34***79 | Wiper Group-Window; -Front | 1 |
| 35***90 | Adapter | 1 |
| 35***95 | Blade-Wiper; (26-Inch) | 1 |
345-1681 Wiper Gp-Window -Rh
| 2D***67 | Fitting-Grease; (Fan Drive) | 2 |
| 33***42 | Pin As | 2 |
| 34***17 | Bolt-Flange Head; (M16x2x40-mm) | 2 |
345-1676 Wiper Gp-Window -Rear
| 34***76 | Wiper Group-Window; -Rear | 1 |
| 35***90 | Adapter | 1 |
| 35***95 | Blade-Wiper; (26-Inch) | 1 |
Power Train
338-2900 Axle & Mounting Ar
| 33***44 | Axle Ar; -Bogie | 1 |
| 33***00 | Axle & Mounting Ar | 1 |
| 34***80 | Bolt; (M30x3.5x250-mm) | 4 |
338-2895 Axle & Mtg Ar-Front
| 33***66 | Axle Ar-Front; -Bogie | 1 |
| 33***95 | Axle & Mtg Ar-Front | 1 |
| 34***80 | Bolt; (M30x3.5x250-mm) | 4 |
333-3844 Axle Ar -Bogie
| 33***44 | Axle Ar; -Bogie | 1 |
| 34***10 | Differential Group | 1 |
| 34***11 | Axle Group-Fixed | 1 |
333-3773 Axle Ar-Fixed
| 33***73 | Axle Ar-Fixed | 1 |
| 33***00 | Guard Group-Bottom; -8wd | 1 |
| 33***95 | Axle & Mtg Ar-Front | 1 |
333-3772 Axle Ar-Fixed -Front
| 33***72 | Axle Ar-Fixed; -Front | 1 |
| 33***01 | Guard Group-Axle; -6wd | 1 |
| 33***93 | Axle Group-Fixed; -Front | 1 |
333-3766 Axle Ar-Front -Bogie
| 33***66 | Axle Ar-Front; -Bogie | 1 |
| 34***85 | Axle Group-Fixed | 1 |
| 34***27 | Differential Group | 1 |
333-3755 Axle Ar-Rear -Bogie
| 33***55 | Axle Rear Axle; -Bogie | 1 |
| 34***27 | Differential Group | 1 |
| 34***31 | Axle Group-Fixed | 1 |
348-2412 Axle Gp
| 34***53 | Cover | 6 |
| 34***54 | Shaft | 6 |
| 34***56 | Bushing-Spacer | 6 |
338-2893 Axle Gp-Fixed -Front
| 33***11 | Axle Group-Fixed; -Front | 1 |
| 33***93 | Axle Group-Fixed; -Front | 1 |
| 34***80 | Bolt; (M30x3.5x250-mm) | 4 |
356-0049 Axle Gp-Fixed
| 34***16 | Shaft-Sun Gear | 1 |
| 34***21 | Cap | 4 |
| 34***24 | Ring-Scraper | 1 |
341-9485 Axle Gp-Fixed
| 34***85 | Axle Group-Fixed | 1 |
| 34***16 | Shaft-Sun Gear | 1 |
| 34***21 | Cap | 4 |
357-0165 Axle Gp-Fixed
| 34***90 | Cylinder Group-Brake | 1 |
| 34***41 | Disc | 6 |
| 34***42 | Disc-Friction | 6 |
341-9631 Axle Gp-Fixed
| 34***16 | Shaft-Sun Gear | 1 |
| 34***21 | Cap | 4 |
| 34***24 | Ring-Scraper | 1 |
348-2411 Axle Gp-Fixed
| 33***28 | Shaft-Gear; (17-Teeth) | 1 |
| 34***21 | Cap | 10 |
| 34***24 | Ring-Scraper | 1 |
356-4448 Axle Gp-Fixed
| 34***16 | Shaft-Sun Gear | 1 |
| 34***21 | Cap | 4 |
| 34***24 | Ring-Scraper | 1 |
343-8837 Axle Gp-Fixed -Front
| 34***90 | Cylinder Group-Brake | 1 |
| 34***41 | Disc | 6 |
| 34***42 | Disc-Friction | 6 |
333-3811 Axle Gp-Fixed -Front
| 33***11 | Axle Group-Fixed; -Front | 1 |
| 34***35 | Differential & Bevel Gear Group | 1 |
| 34***37 | Axle Group-Fixed; -Front | 1 |
357-0478 Axle Gp-Fixed
| 33***29 | Shaft-Gear; (17-Teeth) | 1 |
| 34***21 | Cap | 5 |
| 34***24 | Ring-Scraper | 1 |
341-9654 Axle Gp-Front
| 34***54 | Axle Group-Front | 1 |
| 34***53 | Cover | 6 |
| 34***54 | Shaft | 6 |
338-2894 Bogie Gp-Rear
| 33***55 | Axle Rear Axle; -Bogie | 1 |
| 33***94 | Bogie Group-Rear | 1 |
| 34***80 | Bolt; (M30x3.5x250-mm) | 4 |
343-8850 Case Gp-Transmission
| 34***40 | Fork | 1 |
| 34***50 | Case Group-Transmission | 1 |
| 34***56 | Sensor; (Transmission) | 2 |
341-9490 Cylinder Gp-Brake
| 34***90 | Cylinder Group-Brake | 1 |
| 34***82 | Cap | 1 |
| 34***83 | Housing-Main | 1 |
348-2415 Cylinder Gp-Brake -Lh
| 34***82 | Cap | 1 |
| 34***83 | Housing-Main | 1 |
| 34***84 | Piston | 1 |
348-2416 Cylinder Gp-Brake -Rh
| 34***82 | Cap | 1 |
| 34***83 | Housing-Main | 1 |
| 34***84 | Piston | 1 |
343-8927 Cylinder Gp-Gearshift
| 34***70 | Piston | 1 |
| 34***71 | Housing-Cylinder | 1 |
| 34***75 | Cap | 1 |
343-8835 Differential & Bevel Gear Gp
| 33***21 | Case | 1 |
| 34***91 | Kit-Shim | 1 |
| 34***00 | Kit-Shim | 2 |
341-9627 Differential Gp
| 34***91 | Kit-Shim | 1 |
| 34***99 | Housing-Differential | 1 |
| 34***00 | Kit-Shim | 2 |
348-2410 Differential Gp
| 33***06 | Kit-Bushing | 1 |
| 34***91 | Kit-Shim | 1 |
| 34***09 | Set-Yoke | 1 |
341-9655 Drive Gp-Final
| 34***55 | Drive Group-Final | 1 |
| 34***27 | Plate-Lock | 8 |
| 34***32 | Seal | 1 |
343-8838 Drive Gp-Final
| 34***27 | Plate-Lock | 8 |
| 34***28 | Shaft-Gear | 1 |
| 34***29 | Hub-Wheel | 1 |
348-2413 Drive Gp-Final
| 34***32 | Seal | 1 |
| 34***33 | Ring | 1 |
| 34***73 | Nut-Spanner; (M85x2-Thd) | 1 |
333-7750 Drive Gp-Pump
| 1L***09 | Screw,Cap,Socket He Housing Mtg | 8 |
| 33***50 | Drive Group-Pump | 1 |
| 33***85 | Coupling-Pump | 1 |
343-8830 Gear Gp-Transfer
| 34***30 | Gear Group-Transfer | 1 |
| 34***36 | Shaft-Pinion | 1 |
| 34***42 | Gear Set | 1 |
343-8839 Gear Gp-Transfer
| 34***39 | Gear Group-Transfer | 1 |
| 34***41 | Shaft-Pinion; (22-Teeth) | 1 |
| 34***55 | Gear Set | 1 |
343-8854 Gear Gp-Transfer
| 34***54 | Gear Group-Transfer | 1 |
| 34***65 | Kit-Shim | 1 |
| 34***73 | Shaft-Gear | 1 |
333-3940 Lines Gp-Differential Lock
| 03***14 | . Bolt; Socket, Screw (On Left Side Of Seat Frame Plate) | 4 |
| 13***18 | Fitting Group-Tube | 3 |
| 15***06 | Connector As; (M14x1.5 To 11/16-16, 90-Deg) | 10 |
333-3939 Lines Gp-Differential Lock
| 14***28 | Connector Assem. | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 3 |
333-3941 Lines Gp-Differential Lock
| 11***27 | Hose Assem. | 1 |
| 12***41 | Hose As | 1 |
| 13***98 | Connector | 1 |
333-8288 Lines Gp-Hydrostatic
| 33***88 | Lines Group-Hydrostatic | 1 |
| 33***02 | Lines Group-Hydrostatic; -Hystat Propel | 1 |
| 33***98 | Hose As | 2 |
333-8302 Lines Gp-Hydrostatic -Hystat Propel
| 13***25 | Flange-Split | 8 |
| 14***17 | Adapter, -12 Orb / -16 Orfs | 1 |
| 14***35 | Connect Group; (Each Includes) | 2 |
333-3771 Motor & Mtg Gp-Propel
| 30***29 | Bolt; (M20x2.5x55-mm) | 4 |
| 33***71 | Motor & Mtg Group-Propel | 1 |
| 33***57 | Motor Group-Piston | 1 |
338-3057 Motor Gp-Piston
| 10***85 | Seal-O-Ring (6.07mm Id) | 6 |
| 11***16 | Seal-O-Ring | 1 |
| 13***76 | Seal-O-Ring | 2 |
338-3055 Motor Gp-Piston
| 1L***68 | Ring-Retaining | 1 |
| 20***93 | Kit-Seal | 1 |
| 20***94 | Seal; (Shaft) | 1 |
338-3200 Motor Gp-Piston
| 18***83 | Nut-Hex Flange; (M12x1.75-Thd) | 2 |
| 33***55 | Motor Group-Piston | 1 |
| 33***00 | Motor Group-Piston | 1 |
348-2414 Planetary Gp-Final Drive
| 34***65 | Pin | 4 |
| 34***66 | Carrier-Planetary | 1 |
| 34***14 | Planetary Group-Final Drive | 1 |
333-7753 Power Train Ar
| 33***71 | Motor & Mtg Group-Propel | 1 |
| 33***22 | Shaft Group-Drive | 1 |
| 33***90 | Pump & Mtg Group-Hydraulic | 1 |
333-7774 Power Train Ar
| 33***71 | Motor & Mtg Group-Propel | 1 |
| 33***99 | Transmission & Mounting Group | 1 |
| 33***22 | Shaft Group-Drive | 1 |
338-2950 Shaft Gp-Drive
| 33***50 | Shaft Group-Drive | 1 |
| 35***02 | Shaft | 1 |
| 35***03 | Nut-Castle | 2 |
333-3822 Shaft Gp-Drive
| 33***22 | Shaft Group-Drive | 1 |
| 33***48 | Slip Joint Group | 1 |
| 33***49 | Slip Joint Group | 2 |
343-8886 Shaft Gp-Drive
| 34***59 | Set-Yoke | 1 |
| 34***61 | Kit-Shim | 1 |
| 34***69 | Piston | 1 |
333-3740 Tire & Rim Ar
| 33***40 | Tire & Rim Ar | 1 |
| 34***02 | Tire & Rim Group | 8 |
333-3767 Tire & Rim Ar
| 33***67 | Tire & Rim Ar | 1 |
| 34***81 | Tire & Rim Group; -Front | 2 |
| 34***00 | Tire & Rim Group | 4 |
333-3907 Tire & Rim Ar
| 33***07 | Tire & Rim Ar | 1 |
| 34***81 | Tire & Rim Group; -Front | 2 |
| 34***02 | Tire & Rim Group | 4 |
333-3800 Tire & Rim Ar
| 33***57 | Tire & Rim Group; -Rear | 4 |
| 33***00 | Tire & Rim Ar | 1 |
| 34***81 | Tire & Rim Group; -Front | 2 |
333-3759 Tire & Rim Ar
| 33***59 | Tire & Rim Ar | 1 |
| 34***00 | Tire & Rim Group | 8 |
333-3756 Tire & Rim Ar
| 33***56 | Tire & Rim Ar | 1 |
| 33***57 | Tire & Rim Group; -Rear | 8 |
345-2381 Tire & Rim Gp -Front
| 33***22 | Wheel; (34x20) | 1 |
| 33***64 | Tire; (700/70-34) | 1 |
| 33***71 | Tube | 1 |
345-2902 Tire & Rim Gp
| 33***19 | Wheel; (26.5x24) | 1 |
| 33***66 | Tire; (750/55-26.5) | 1 |
| 33***70 | Tube | 1 |
333-3757 Tire & Rim Gp -Rear
| 33***57 | Tire & Rim Group; -Rear | 1 |
| 33***78 | Wheel; (26.5x20) | 1 |
| 33***80 | Tire; (650/65-26.5) | 1 |
345-2900 Tire & Rim Gp
| 33***19 | Wheel; (26.5x24) | 1 |
| 33***65 | Tire; (750/55-26.5) | 1 |
| 33***70 | Tube | 1 |
333-3832 Track Ar -2-Required, Extreme Duty
| 33***32 | Track Ar; -2-Required, Extreme Duty | 1 |
| 34***90 | Track; (750/55-26.5)(Tire) | 2 |
333-3833 Track Ar -1-Required, Heavy Duty
| 33***33 | Track Ar; -1-Required, Heavy Duty | 1 |
| 34***88 | Track; (650/65-26.5)(Tire) | 1 |
333-3829 Track Ar -2-Required, Heavy Duty
| 33***29 | Track Ar; -2-Required, Heavy Duty | 1 |
| 34***88 | Track; (650/65-26.5)(Tire) | 2 |
333-3830 Track Ar
| 33***30 | Track Ar | 1 |
| 34***89 | Track; (750/55-26.5)(Tire) | 2 |
333-3836 Track Ar -1-Required, Extreme Duty
| 33***36 | Track Ar; -1-Required, Extreme Duty | 1 |
| 34***90 | Track; (750/55-26.5)(Tire) | 1 |
333-3834 Track Ar -1-Required, Heavy Duty
| 33***34 | Track Ar; -1-Required, Heavy Duty | 1 |
| 34***89 | Track; (750/55-26.5)(Tire) | 1 |
333-8589 Transmission & Mounting Gp
| 33***45 | Transmission Group | 1 |
| 33***89 | Transmission & Mounting Group | 1 |
| 34***19 | Bolt-Flange Head; (M16x2x50-mm) | 6 |
333-3799 Transmission & Mounting Gp
| 33***99 | Transmission & Mounting Group | 1 |
| 33***51 | Transmission Group | 1 |
| 34***19 | Bolt-Flange Head; (M16x2x50-mm) | 6 |
333-3845 Transmission Gp
| 33***45 | Transmission Group | 1 |
| 34***39 | Gear Group-Transfer | 1 |
| 34***50 | Case Group-Transmission | 1 |
338-2951 Transmission Gp
| 33***51 | Transmission Group | 1 |
| 34***30 | Gear Group-Transfer | 1 |
| 34***50 | Case Group-Transmission | 1 |
338-3051 Valve Gp-Solenoid
| 12***14 | Kit-Seal | 1 |
| 12***54 | Kit-Seal | 1 |
| 33***51 | Valve Group-Solenoid | 1 |
Service Equipment And Supplies
333-3887 Box Gp-Tool
| 33***87 | Box Group-Tool | 1 |
333-7777 Plate & Film Gp
| 33***77 | Plate & Film Group | 1 |
Work Tools
333-3789 Blade Ar
| 09***97 | Washer, Spring | 4 |
| 13***12 | Washer-Spring | 30 |
| 18***83 | Nut-Hex Flange; (M12x1.75-Thd) | 4 |
333-3936 Blade Gp-Decking
| 20***26 | Guard-Hose; (123-cm Each) | 0 |
| 33***36 | Blade Group-Decking | 1 |
| 33***82 | Hose As | 2 |
333-7756 Gate Gp
| 20***26 | Guard-Hose; (123-cm Each) | 0 |
| 33***56 | Gate Group | 1 |
| 33***82 | Hose As | 2 |
333-3783 Grapple Ar
| 17***34 | Fitting | 1 |
| 18***16 | Fitting-Grease | 6 |
| 33***83 | Grapple Ar | 1 |
344-0393 Grapple Gp
| 34***93 | Grapple Group | 2 |
| 34***95 | Rotator Group-Hydraulic | 1 |
| 34***96 | Link Group-Grapple | 1 |
344-0399 Grapple Gp
| 33***71 | Lines Group-Log Loader | 1 |
| 34***99 | Grapple Group | 1 |
| 34***91 | Loader Group-Log | 1 |
333-3786 Grapple Gp
| 20***63 | Fitting-Grease | 6 |
| 33***86 | Grapple Group | 1 |
| 35***26 | Cylinder Group-Grapple | 1 |
344-0398 Grapple Gp
| 15***44 | Nut | 1 |
| 34***98 | Grapple Group | 1 |
| 35***12 | Damper | 1 |
344-0392 Grapple Gp
| 34***92 | Grapple Group | 2 |
| 34***95 | Rotator Group-Hydraulic | 1 |
| 34***96 | Link Group-Grapple | 1 |
344-0396 Link Gp-Grapple
| 33***71 | Lines Group-Log Loader | 1 |
| 33***36 | Loader Group-Log | 1 |
| 34***96 | Link Group-Grapple | 1 |
333-3779 Loader Ar-Log -8.5-M
| 33***79 | Loader Ar-Log; -8.5-M | 1 |
| 34***90 | Valve Group-Relief; (Log Loader) | 1 |
| 35***33 | Platform Group-Service | 1 |
333-3776 Loader Ar-Log -7.8-M
| 33***76 | Loader Ar-Log; -7.8-M | 1 |
| 34***90 | Valve Group-Relief; (Log Loader) | 1 |
| 34***91 | Valve-Relief | 2 |
345-2391 Loader Gp-Log
| 34***06 | Base | 1 |
| 34***08 | Plate | 1 |
| 34***44 | Flange | 1 |
338-3036 Loader Gp-Log
| 33***36 | Loader Group-Log | 1 |
| 35***11 | Fitting-Grease | 3 |
| 36***07 | Plate As | 1 |
357-5496 Lubrication Gp-Central
| 15***59 | Spring | 27 |
| 15***61 | Pin-Roll | 4 |
| 15***26 | Plug | 1 |
358-3135 Pillar Gp-Log Loader
| 34***15 | Bolt-Flange Head; (M12x1.75x25-mm) | 4 |
| 34***01 | Box As-Tool | 1 |
| 35***35 | Pillar Group-Log Loader | 1 |
344-0395 Rotator Gp-Hydraulic
| 11***95 | Film-Instruction; (Air Conditioner) | 1 |
| 15***64 | Film; (Instruction) (Hydraulic Oil) (On Forward Of And Above The Hydraulic Tank Sight Gage On Tank Surface) | 1 |
| 16***64 | Film-Instruction; (Cab Lift Pump) | 1 |
2948 serial number reference
The product identification plate on a 2948 forwarder is mounted on the main frame, typically near the front articulation hitch or on the cab door pillar/frame rail; many units also have the PIN stamped directly into the frame steel nearby as a backup. Read the first three characters as the serial prefix, which ties the machine to its parts-book series and configuration; the digits that follow are the sequential build number within that series, used to pin down exact build-in effectivity for parts.
| Prefix | Identifies | Notes |
|---|---|---|
| PCL | 2748/2948 Forwarder family, Forest Products division, C7 engine | The factory parts manual for this forwarder lists PIN range PCL00001-UP, covering both the 2748 and 2948 models in the same series. This PIN range shares the Cat C7 engine with the related 545C, 584 and 584HD forestry machines. Confirm the PIN range with your dealer before ordering parts by PIN. |
Frequently asked questions
What engine does the Caterpillar 2948 use?
The 2948 runs Caterpillar's C7 industrial diesel: a 6-cylinder, 7.2 L engine with HEUI hydraulic fuel injection and ADEM electronic control. It predates the C7 ACERT engine that Caterpillar later fitted to the 584 and 584HD forwarders, so parts and injection-system service differ from those newer machines despite the shared C7 family name.
What is the operating weight of the Caterpillar 2948?
Caterpillar has not published a factory spec sheet for the 2948 by name, so an exact operating weight is not available from public documentation. Configuration, including 6WD versus 8WD bogie axles, a front blade, a telescopic boom stick and central lubrication, changes the weight meaningfully, so verify the figure for your specific serial number with a Cat dealer rather than relying on a generic forwarder chart.
What replaced the Caterpillar 2948?
The 2948, cataloged alongside the smaller 2748, sits ahead of Caterpillar's current forwarder lineup. The 534 through 584HD forwarders, built around the C7 ACERT engine, are the direct descendants of this platform and share the same basic architecture: articulated wheeled chassis, bogie axles and a rear-mounted knuckleboom loader.
What 2948 owners discuss
How much do owners and mechanics actually discuss the Cat 2948 forwarder online?
Not much. Dedicated threads naming the 2948 by number are scarce across equipment forums and social sites - it's a low-volume, discontinued Forest Products Division machine that mostly changed hands through dealers and word of mouth rather than online communities. What does surface is discussion of the shared C7 engine platform and general forwarder wear points common to this class of machine, plus parts cross-reference listings that group the 2948 with the 2748 and the 584/584HD forwarders as sharing the same engine hardware. Treat any specific claim about this model with caution and lean on documented dealer service history for the individual unit rather than general chatter.
What engine quirks come up for machines running the C7 that powers this forwarder?
The C7 industrial diesel under the 2948 is a turbocharged, aftercooled inline-six running a HEUI-style hydraulic injection system. The most repeated complaint across C7 owners is HEUI pump wear shedding fine metal into the engine oil, which then scores the injectors and shows up as rough running or hard starting - check oil for a metallic sheen at every service interval. A second recurring theme is gradual power loss from turbo inlet fouling or, on later emissions-compliant units, a clogging particulate filter. Keep oil changes on schedule with the correct viscosity and have your dealer verify HEUI pump and injector condition if you see metal in the oil or a rough warm idle.
What hydraulic behaviors are typical for the loader and grapple end of this machine?
Continuous grapple and boom cycling wears the knuckleboom's slew (turntable) bearing over time; it needs regular grease and occasional shim adjustment to keep the boom from developing play. Hydraulic hoses routed across the boom's articulation points are a known wear item too, chafing against structure with repeated flex cycles. Main pump and control valve wear tracks contamination more than age - forestry duty runs dirty with mud, bark, and sawdust in the air, so filter maintenance matters more here than in cleaner applications. Have your dealer verify slew bearing bolt torque and hose routing if the boom drifts or knocks during rotation.
What undercarriage and running-gear wear patterns are normal for a forwarder like this?
As an articulated, wheeled forwarder, the 2948 rides on bogie axles with oil-bath bearings rather than a track undercarriage, so checking bogie oil level and watching for leaks at the fill/drain plug is routine maintenance. Tires and chains take the brunt of off-road log-yard wear and are commonly replaced well before the machine itself is worn out. The center articulation joint uses a heavy cast knuckle with tapered roller bearings built for long service life, but like any pivot point it needs greasing on schedule to avoid premature play developing.
Are there known electrical or sensor issues tied to this engine family?
The recurring electrical theme on C7-family engines is sensor and wiring faults around the valve cover and fuel filter base - intermittent fault codes tied to oil pressure or valve-actuation circuits often trace back to a chafed or corroded harness section rather than a bad sensor. Forestry duty adds mud, moisture, and vibration, which accelerates connector corrosion compared to cleaner applications. Inspect and clean connectors and check harness continuity before condemning a sensor. Have your dealer verify any recurring fault code with a proper harness and ECM check rather than swapping sensors on a guess.
What structural wear shows up on the frame, log bunk, and articulation over time?
Direct reports naming the 2948 specifically are thin, but the general pattern for this class of machine holds: cam-stake pivots and bunk pins on the log bunk see the most wear since every load cycle works them, and the skid plates on the frame underside take the brunt of rock strikes in rough terrain. The articulation knuckle bearings are the heavy-duty part of the design and typically outlast the bushings and pins at the boom and bunk pivots. Inspect bunk pivot pins, cam-stake bushings, and skid plate condition at regular service intervals instead of waiting for visible play to show up.
What should someone check before buying a used Cat 2948?
Because published service history and reference material for this model are limited, lean harder than usual on a documented maintenance record and a proper pre-purchase inspection. Pull the oil and check for metallic contamination from HEUI pump wear, confirm cold-start and warm-idle behavior, and check turbo and particulate filter condition for signs of power loss. Check the knuckleboom slew bearing for play, inspect hydraulic hoses and cylinder seals for weeping, and check bogie axle oil level and condition. Walk the frame and bunk for cracks, worn pivot pins, and skid plate damage, and confirm tire and chain wear is consistent with the reported hours. Confirm your local Cat dealer can still source parts and support for this legacy model before committing. Have your dealer verify engine and hydraulic condition with a full inspection before purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 2948 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.