Caterpillarskid steer loadercompact track loader
Caterpillar 289C
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 289C is a mid-size compact track loader, running on steel-embedded rubber tracks instead of tires. It uses the Cat C3.4 DIT engine (from the 3044C engine family), a 3.3 L, four-cylinder, turbocharged and aftercooled diesel rated at roughly 84 hp (63 kW) gross at 2500 rpm, driving a two-speed hydrostatic transmission through planetary final drives and wet multi-disc brakes. Operating weight runs about 4,700 kg (10,365 lb), varying with boom type, undercarriage and attached work tool. Cat built the base 289C from around 2008-2009 into the early 2010s (exact end dates vary by source), offering it with a radial-lift or a vertical-lift boom, standard-flow or high-flow auxiliary hydraulics, and work tools ranging from buckets to grapples, forks and blades. It followed Cat's B-series multi-terrain loaders (267B, 277B, 287B) in this general size class, introducing a new Cat-engineered suspension-type undercarriage in place of the earlier rigid-frame design.
Caterpillar first updated the line to the 289C2, which kept the same C3.4 DIT engine but retuned it for tighter emissions rules and shortened the track-on-ground undercarriage geometry; power output and drivetrain architecture carried over largely unchanged. The 289C2 was in turn replaced by the 289D, which moved to a different C3.3B engine platform and ended direct parts commonality with the C3.4-DIT-based C-series. Because the base 289C and 289C2 share the same engine family, hydrostatic drivetrain and undercarriage design, used units from both generations draw on a common parts and service pool, which keeps the 289C relevant in the used compact-track-loader and parts market even though it is long out of production. Buyers should still confirm which generation and boom configuration they are looking at, since undercarriage length, hydraulic flow and emissions equipment differ across the C, C2 and D versions.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 289C specifications
Engine
| Engine model | Cat C3.4T (also referenced as C3.4 DIT), 4-cylinder inline, turbocharged, liquid-cooled diesel |
| Gross power | 63 kW (84 hp) at 2500 rpm, SAE J1995 |
| Net power | 61 kW (82 hp), SAE J1349 |
| Displacement | 3.3 L (201 cu in) |
| Bore x stroke | 94 mm x 120 mm (3.7 in x 4.7 in) |
| Emissions certification | Original production years meet Tier 3 / Stage IIIA. The later 289C Series 2 revision of this engine family steps up to Tier 4 Interim / Stage IIIA. Check the engine emissions label for the exact serial range. |
Weights
| Operating weight | 4,700-4,702 kg (10,365 lb), standard rubber track undercarriage |
| Ground pressure | 0.28 bar / 28.5 kPa (4.1 psi) |
| Ground contact area | 1.62 m² (2,504 in²) |
| Shipping weight | Not published separately from operating weight in factory literature; use operating weight above for transport planning. |
Dimensions
| Overall length, with bucket | 3.68 m (12.08 ft / 144.8 in) |
| Length, without bucket | 2.96 m (9.72 ft / 116.5 in) |
| Overall width, over tracks | 1.98 m (6.5 ft / 78 in) |
| Height, to cab top | 2.12 m (6.95 ft / 83.4 in) |
| Ground clearance | 230 mm (9.1 in) |
| Track length on ground / overall track length | 1.63 m (64 in) on ground; 2.13 m (83.8 in) overall |
| Turning radius, over bucket corner | 2.31 m (91.1 in) |
Performance
| Travel speed, single-speed | 8.1 kph (5.0 mph) |
| Travel speed, two-speed high range | 13.6 kph (8.5 mph) |
| Maximum lift height, to bucket hinge pin | 3.24 m (10.63 ft / 127.5 in) |
| Dump height, fully raised | 2.46 m (8.06 ft / 96.7 in) |
| Dump reach, at maximum height | 780 mm (30.7 in) |
| Dump angle, at maximum height | 50 degrees |
| Rated operating capacity (35% of tipping load) | 1,222 kg (2,695 lb) |
| Operating load at 50% of tipping load | 1,746 kg (3,850 lb) |
| Tipping load, full | 3,500 kg (7,720-7,721 lb) |
| Bucket breakout force, tilt cylinder | 3,315 kg (7,308-7,310 lb) |
| Hydraulic pump flow, standard | 84 L/min (22 gpm) |
| Hydraulic pump flow, high-flow option | 125 L/min (33 gpm) |
| Hydraulic system relief pressure | 230 bar / 23,000 kPa (3,335 psi) standard flow; up to 280 bar / 28,000 kPa (4,061 psi) with the high-flow option |
Service capacities (summary)
| Fuel tank | 98 L (25.9 gal) |
| Hydraulic system, total | approximately 57 L (15.1 gal); hydraulic tank/reservoir alone about 42 L (11 gal) |
| Engine oil, crankcase with filter | 10 L (2.6 gal) |
| Cooling system | 14 L (3.7 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
289C fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) - Cat C3.4 DIT (3044-family) turbocharged diesel | 10 L incl. filter (2.6 US gal / 2.2 Imp gal); filter itself holds about 1 L (0.26 US gal) | Cat DEO-ULS or Cat DEO multigrade diesel engine oil. SAE 10W-30 for -18 to 40C (0 to 104F); SAE 15W-40 for -9.5 to 50C (15 to 122F); Cat DEO-ULS Cold Weather SAE 0W-40 down to -40C (-40F) for cold-start regions. Full-synthetic Cat DEO-ULS SYN or Cat DEO SYN also listed as options across the range. |
| Cooling system | 13.9-14 L (3.7 US gal / 3.1 Imp gal) | Preferred: Cat ELC (Extended Life Coolant). Acceptable: Cat DEAC (Diesel Engine Antifreeze/Coolant). Plain water is never used alone as coolant. |
| Fuel tank | 97.5-98 L (25.8 US gal / 21.4 Imp gal) | Distillate diesel fuel meeting Caterpillar's distillate fuel specification (ASTM D975 or EN 590). Biodiesel blends up to B20 are acceptable when blend quality and storage guidelines are followed. |
| Hydraulic system and tank (also serves the hydrostatic drive circuit - no separate transmission compartment on this machine) | Hydraulic tank about 39 L (10.3 US gal / 8.6 Imp gal); total hydraulic system oil (tank plus lines and cylinders) about 57 L (15.0 US gal). Tank size varies by series/production run - some spec sheets list 42 L (11.1 US gal) for the tank alone. | Preferred oils: Cat HYDO Advanced 10 (SAE 10W) for -20 to 40C (-4 to 104F), Cat HYDO Advanced 30 (SAE 30) for warmer ranges, or Cat BIO HYDO Advanced. Second-choice oils: Cat MTO, Cat DEO/DEO-ULS, Cat TDTO, Cat TDTO Cold Weather, or Cat TDTO-TMS, graded to ambient temperature per the viscosity chart (as cold as -40C/-40F with Cold Weather grades). |
| Final drive, each side (two final drives, track-drive machine - no axle differentials) | 1.0 L each (0.26 US gal / 0.22 Imp gal) | Cat Synthetic GO (Gear Oil), SAE 75W-140, rated -30 to 45C (-22 to 113F). If unavailable, substitute Cat GO (SAE 80W-90 or SAE 85W-140) or an API GL-5 gear oil. |
| Track rollers and idlers (sealed lubricant chambers, undercarriage-specific to this track-drive machine) | Track roller about 240 mL each; single-flange idler about 349 mL; dual-flange idler about 354 mL | Same oil grade as the engine crankcase: Cat DEO-ULS or Cat DEO, SAE 10W-30 for -18 to 40C (0 to 104F) or SAE 15W-40 for -9.5 to 50C (15 to 122F); Cat DEO-ULS Cold Weather SAE 0W-40 down to -40C (-40F) in cold climates. |
| Grease - external lubrication points and track roller frame recoil spring (spec only, no bulk fill volume) | Per-fitting service item, no system capacity specified | Standard: Cat Advanced 3Moly, NLGI Grade 2, rated -20 to 40C (-4 to 104F), usable up to 60C (140F) max in hot climates. Cold climates: Cat Ultra 5Moly, NLGI Grade 0-2, down to -35C (-31F). Extreme cold: Cat Arctic Platinum or Cat Desert Gold, NLGI Grade 0, down to -50C (-58F). |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 289C maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 3,000 h |
|
| Every 6,000 h |
|
| Every 12,000 h |
|
Servicing the 289C beyond the schedule
Predictive Maintenance & Fluid Analysis
Pull an engine oil sample every 250 hours and hydraulic oil plus coolant samples every 500 hours on the C3.4 DIT engine; trending iron and copper points to turbocharger or final-drive wear before it causes failure. Track rollers and idlers are sealed for life and not serviceable, so watch for oil weeping or play as the only early warning. Rising water content in hydraulic oil usually signals a failing hydrostatic drive-motor seal, not a filter problem.
Corrective & Common Repairs
Track tension loss is the most common field complaint; the grease-charged tensioning cylinder loses pressure and needs a re-grease, not a new track. Overfilled final drives push hydraulic oil or water past the travel-motor seals and contaminate the planetary gear oil. Check level, don't top it off blind. Expect worn quick-coupler pins, cracked cutting edges, and belt-tension drift on the C3.4 DIT's alternator and air-conditioning compressor pulleys as routine wear items.
Overhaul & Rebuild Points
At major overhaul, plan on rebuilding the hydrostatic drive pump and travel motors and inspecting the planetary final-drive gearsets for wear; this drivetrain does the work an axle and differential would do on a wheeled loader. Turbocharger rebuild or replacement on the C3.4 DIT is common once oil-analysis trends show bearing wear. Sealed track rollers and idlers cannot be resealed in the field: once they leak or show end play, replace them as complete units, along with the track-tensioning cylinder if it won't hold pressure.
Seasonal & Environment Servicing
Below about -20°C, switch to an arctic-grade hydraulic oil and confirm the glow-plug circuit and cold-start fuse work; drain the fuel-tank water separator more often as cold, damp weather increases tank condensation. In hot, dusty jobs, clean the radiator and aftercooler cores and intake screens more often than standard, since packed debris raises engine and hydraulic temperatures fast. Abrasive dirt and mud wear the rubber track and sealed rollers faster than it wears tires, so shorten undercarriage inspection intervals in those conditions.
289C common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 110-6326 | Filter Element As-Air | Air intake service | Check fitment → |
| 110-6331 | Filter Element As-Air | Air intake service | Check fitment → |
| 265-6618 | Filter Element-Cab Air | Air intake service | Check fitment → |
| 265-6619 | Filter Element-Cab Air | Air intake service | Check fitment → |
| 1G-8878 | Filter As-Oil | Hydraulic service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
289C fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| E875-2 | Level 2 machine event for low system voltage. Battery/system voltage has dropped below roughly 12.0 VDC for 30 seconds with the engine running. | Weak or discharged battery, corroded battery terminals or ground straps, loose charging wiring, or an alternator that has stopped charging. | Check battery state of charge, terminals, and ground connections first. Load-test the battery and check alternator output before replacing any component. If the event stays active, shut the machine down and troubleshoot the charging circuit. |
| 2471-3 | Door or operator-presence (implement lockout) switch circuit reading voltage above the normal range, seen by the machine ECM as an open circuit. | Failed door/seat-bar lockout switch, broken wire, or a bad connector in the switch circuit. The ECM will not release hydraulic lockout or the parking brake with this code active. | Cycle the door/seat bar and check switch continuity. Inspect the harness and connector at the switch before replacing the switch itself. |
| 2474-3 | Left joystick forward/reverse position sensor signal is outside the expected voltage range. | Joystick out of calibration, a failing position sensor in the joystick pod, or a wiring fault between the joystick and the machine ECM. Can prevent the parking brake from releasing since the ECM requires all joystick sensors to read neutral first. | Recalibrate the joystick per the service procedure. If the code returns, check sensor wiring and the connector before replacing the joystick pod. |
| 2476-3 | Left joystick left/right position sensor signal is outside the expected voltage range. | Same failure mode as the forward/reverse sensor on the same joystick: calibration drift, sensor wear, or a harness fault. | Recalibrate the joystick, then inspect wiring and connector, then replace the sensor or joystick pod if the fault persists. |
| 358-5 | Implement pilot pressure solenoid circuit showing abnormally low current, read by the ECM as an open circuit. | Open coil winding in the pilot solenoid, a broken wire, or a disconnected connector. This solenoid feeds pilot pressure to the implement controls, so a fault here commonly shows up as hydraulics locking out with no obvious code on the display. | Check the solenoid connector and wiring for continuity, test coil resistance, and replace the solenoid if the coil is open. |
| 681-5 | Parking brake release solenoid circuit showing low or no current, not a voltage fault. | Open circuit in the solenoid coil or its wiring, which keeps the parking brake from releasing even though the dash switch operates normally. | Inspect wiring and the connector at the brake solenoid, test coil resistance, and replace the solenoid if the circuit is open. |
| 1251-4 | Alternator output voltage sensed by the machine ECM is below normal. | Failing alternator, worn or loose drive belt, or poor ground/wiring in the charging circuit. | Check belt tension and measure alternator output at the battery. Inspect grounds and charging wiring before replacing the alternator. |
| 2685-8 | Abnormal frequency, pulse width, or period from the left-side track drive motor speed sensor. | Damaged or contaminated sensor tip, incorrect sensor air gap, or a damaged tone ring or wiring on the left drive motor. | Inspect and clean the sensor tip, check the air gap, and inspect wiring and connector before replacing the sensor. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
289C attachments & work tools
Buckets
Main work-tool family for this class covers general purpose, multi-purpose (4-in-1), high-capacity/light-material, dirt/utility, and grapple buckets. A typical general-purpose bucket for this size machine runs about 2100-2150 mm (83-85 in) wide with roughly 0.6-0.7 m3 (21-24 ft3) capacity; exact width/capacity varies by bucket style and cutting-edge choice.
Forks
Pallet forks plus industrial and utility grapple forks cover material handling and debris work. Frame and tine capacity is matched to the machine's roughly 1.2 tonne (2,700 lb) rated operating capacity, lower than fork ratings on a wheel loader of similar frame size.
Brooms and sweepers
Angle, pickup, and utility broom heads are offered for this size class. All are hydraulically driven off the auxiliary circuit, so the loader needs its aux hydraulics connected and functional to run them.
Coupler and mounting
This machine is a rubber-tracked compact track loader, not a wheeled skid steer, but uses the same Cat work-tool interface as the wheeled line. Standard coupler is a manual, pin-and-wedge type engaged with two high-leverage handles at the lift-arm face; an optional cab-actuated hydraulic quick coupler lets the operator swap tools without leaving the seat.
Auxiliary hydraulic arrangement
Pump is driven off the machine's Cat C3.4 DIT turbocharged diesel rated around 63 kW (84 hp); a later, emissions-detuned variant of this model line runs a lower rating and is a separate configuration. Standard auxiliary circuit flows about 84 L/min (22 gpm) at roughly 230 bar (3,335 psi); an optional High Flow XPS load-sensing, pressure-compensated circuit raises flow to about 125 L/min (33 gpm) at roughly 270-280 bar (3,900-4,070 psi, varies by configuration).
High-flow-dependent work tools
Flow-hungry tools such as cold planers, mulching/brush-cutting heads, and rock or wheel saws need the High Flow XPS circuit to run at rated speed; lighter tools like augers, broom heads, and pallet forks run fine on the standard-flow circuit. The cooling package is sized so high-flow tools can run continuously without overheating.
Trenching, boring, and ground-engaging tools
Augers, trenchers, landscape rakes/tillers, and vibratory compactors are offered for this size class of compact track loader for utility, landscaping, and site-prep work. Sizing (auger diameter, trench depth) follows which hydraulic circuit -- standard or high flow -- the tool is built for, not a separate mounting kit.
Snow and seasonal tools
Snow blades/pushers and snow blowers are offered for this size class and mount through the same coupler as bucket and fork tools. Snow blowers draw on the auxiliary hydraulic circuit to spin the blower housing.
Implement control and cab guarding options
Selectable Implement Control gives three operator-selectable levels of lift/tilt responsiveness to suit the tool in use and is a factory option on this model. Cab guarding options include glass or polycarbonate door/side glazing and top-and-rear FOPS Level I screens for work-tool debris protection, available with open ROPS or enclosed ROPS-with-heat or ROPS-with-heat-and-air-conditioning cab packages.
High-flow activation note
On machines fitted with the electro-hydraulic high-flow switch, a work tool that lacks its own control harness needs a jumper plug fitted at the tool's electrical connector before the cab switch will activate high flow.
All 289C assemblies by section
Every catalogued assembly group for the Caterpillar 289C. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
258-3320 Air Cleaner Gp
| 15***98 | Band-Mounting | 1 |
| 23***25 | Indicator | 1 |
| 25***20 | Air Cleaner Group | 2 |
258-3453 Air Cleaner Gp
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 2 |
| 13***43 | Clamp-Hose | 1 |
| 25***11 | Plate | 1 |
280-8294 Air Cleaner Gp
| 28***94 | Air Cleaner Group | 1 |
| 28***55 | Guard As-Exhaust; (Turbocharger) | 1 |
| 28***91 | Flange, Guard-Exhaust; (Manifold) | 1 |
280-8393 Guard Gp-Debris -Turbocharger, Exhaust Manifold
| 27***52 | Guard-Exhaust; (Manifold) | 1 |
| 28***55 | Guard As-Exhaust; (Turbocharger) | 1 |
| 28***93 | Guard Group-Debris; -Turbocharger, Exhaust Manifold | 1 |
272-3062 Kit-Debris Guard -Turbocharger, Exhaust Manifold
| 27***62 | Kit-Debris Guard; -Turbocharger, Exhaust Manifold | 1 |
| 5I***78 | Gasket | 1 |
| 5I***21 | Elbow Assem. | 1 |
258-2465 Lines Gp-Air
| 09***00 | Washer; (1.5mm Thk) | 2 |
| 25***12 | Clip | 1 |
| 25***65 | Lines Group-Air | 1 |
247-6317 Lines Gp-Air
| 24***17 | Lines Group-Air | 1 |
| 25***64 | Hose As | 1 |
| 5P***68 | Clamp-Hose; (Us Sourced) | 1 |
315-7769 Lines Gp-Air
| 19***22 | Bolt As; (M8x1.25x22-mm) | 4 |
| 27***82 | Clip | 2 |
| 31***40 | Elbow | 1 |
316-0471 Lines Gp-Air
| 19***60 | Nut; (M8x1.25-Thd) | 8 |
| 23***60 | Bolt | 8 |
| 23***24 | Gasket-Manifold | 1 |
287-5323 Manifold Gp-Exhaust
| 09***49 | Bolt; (M8x1.25x40-mm) | 12 |
| 23***05 | Manifold-Inlet | 1 |
| 23***06 | Gasket; (Inlet Manifold) | 1 |
335-5750 Manifold Gp-Inlet
| 19***76 | Washer-Hard; (8.8x20x8-mm Thk) | 3 |
| 23***21 | Nut; (M10x1.25-Thd) | 1 |
| 25***19 | Muffler As | 1 |
287-4832 Manifold Gp-Inlet
| 09***49 | Bolt; (M8x1.25x40-mm) | 11 |
| 23***05 | Manifold-Inlet | 1 |
| 23***06 | Gasket; (Inlet Manifold) | 1 |
258-2462 Muffler & Mounting Gp
| 19***76 | Washer-Hard; (8.8x20x8-mm Thk) | 3 |
| 23***21 | Nut; (M10x1.25-Thd) | 1 |
| 25***62 | Muffler & Mounting Group | 1 |
280-8347 Muffler & Mounting Gp
| 09***00 | Washer; (1.5mm Thk) | 3 |
| 19***06 | Gasket | 4 |
| 23***18 | Gasket | 1 |
315-7768 Turbocharger Gp
| 13***87 | Clip | 1 |
| 19***36 | Insert-Threaded; (M6x1-Thd) | 3 |
| 23***96 | Screw-Flat Head; (M6x1x35-mm) | 4 |
Basic Engine
323-2009 Accessory Gp-Engine
| 32***09 | Accessory Group-Engine | 1 |
| 34***61 | Kit-Gasket | 1 |
292-4041 Bearing Gp-Main
| 10***88 | Plate-Thrust; (Standard) | 3 |
| 10***89 | Plate-Thrust; (0.15-mm Os) | 0 |
| 10***90 | Plate-Thrust; (0.35-mm Os) | 0 |
314-9835 Camshaft Gp
| 09***28 | Key | 1 |
| 10***72 | Tappet | 8 |
| 10***73 | Rod-Push | 8 |
287-4033 Connecting Rod Gp
| 10***80 | Rod As-Connecting | 4 |
| 12***55 | Bolt-Connecting Rod | 2 |
| 12***56 | Nut | 2 |
315-7762 Cover Gp-Valve Mechanism
| 09***49 | Bolt; (M8x1.25x40-mm) | 5 |
| 23***83 | Gasket; (Valve Cover) | 1 |
| 31***98 | Cap-Oil Filler; (Engine) | 1 |
314-9860 Crankshaft Gp
| 08***13 | Pin | 2 |
| 09***28 | Key | 2 |
| 13***96 | Nut | 1 |
315-8330 Cylinder Block Gp
| 09***41 | Cap | 10 |
| 09***20 | Pin | 2 |
| 10***76 | Bolt-Bearing Cap | 10 |
315-7760 Cylinder Head Gp
| 10***46 | Bolt-Cylinder Head | 17 |
| 29***45 | Gasket-Head | 1 |
| 31***60 | Cylinder Head Group | 1 |
258-2452 Drain Gp-Engine Oil
| 11***70 | Cap | 1 |
| 1P***78 | Clamp; (Hose) | 1 |
| 21***19 | Adapter | 1 |
314-9861 Flywheel Gp
| 03***39 | Gear-Starter; (112-Teeth) | 1 |
| 22***93 | Bolt; (M12x1.25x30-mm) | 6 |
| 23***91 | Flywheel As | 1 |
315-7766 Gear Gp-Front
| 11***27 | Gear; (46-Teeth) | 1 |
| 11***29 | Gear; (23-Teeth) | 1 |
| 11***85 | Gear-Pump; (Oil, 31-Teeth) | 1 |
258-2469 Guard Gp-Belt
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 4 |
| 13***22 | Bolt-Locking; (M8x1.25x16-mm) | 2 |
| 25***43 | Guard-Belt | 1 |
280-8407 Guard Gp-Belt
| 10***80 | Gasket-Rear | 1 |
| 11***15 | Seal As-Oil | 1 |
| 14***17 | Bolt; (M10x1.25x25-mm) | 10 |
315-7764 Housing Gp-Flywheel
| 09***00 | Washer; (1.5mm Thk) | 2 |
| 09***29 | Seal-O-Ring (Id=139.5mm); (Id=139.50mm) | 1 |
| 19***12 | Bolt; (M6x1x18-mm) | 4 |
315-8336 Housing Gp-Front
| 23***66 | Eye | 1 |
| 23***68 | Gasket; (Rear Head) | 1 |
| 31***04 | Cover | 1 |
315-7761 Lifting Gp-Engine
| 11***90 | Mount As | 2 |
| 12***80 | Locknut; (M12x1.75-Thd) | 1 |
| 14***88 | Mount-Engine | 2 |
258-2447 Mounting Gp-Engine
| 09***82 | Gasket, Oil Drain | 1 |
| 13***32 | Plug; (Drain, Engine Oil) | 1 |
| 16***01 | Sealant-Silicone | 1 |
315-7765 Pan Gp-Oil
| 09***82 | Gasket, Oil Drain | 1 |
| 13***32 | Plug; (Drain, Engine Oil) | 1 |
| 16***01 | Sealant-Silicone | 1 |
335-5772 Pan Gp-Oil
| 23***15 | Pin-Piston | 4 |
| 25***38 | Ring-Snap | 8 |
| 31***52 | Piston; (0.25-mm Os) | 0 |
314-9855 Piston Gp
| 31***55 | Piston Group | 1 |
| 5I***05 | Plug | 6 |
287-2922 Plug Gp-Engine
| 19***11 | Plug | 1 |
| 28***22 | Plug Group-Engine; -Cylinder Block, Lh | 1 |
287-2983 Plug Gp-Engine
| 28***83 | Plug Group-Engine; -Cylinder Block, Rh | 1 |
| 30***97 | Pulley-Crankshaft; (2-Groove) | 1 |
301-3396 Pulley Gp-Crankshaft
| 23***07 | Pulley | 1 |
| 30***96 | Pulley Group-Crankshaft | 1 |
| 8T***42 | Bolt; (M8x1.25x14-mm) | 4 |
287-6114 Pulley Gp-Water Pump
| 28***14 | Pulley Group-Water Pump | 1 |
| 35***69 | V-Belt; (Water Pump) | 1 |
287-6138 V-Belt Gp
| 09***05 | Cap | 1 |
| 19***24 | Ring-Snap | 2 |
| 22***45 | Rocker As | 8 |
235-5880 Valve Mechanism Gp
| 09***37 | Seal-O-Ring | 1 |
| 09***71 | Seal-O-Ring (Id=94.40mm) | 1 |
| 1R***34 | Filter-Engine Oil | 1 |
Cooling System
314-9900 Cooler Gp-Engine Oil
| 09***13 | Seal-O-Ring | 4 |
| 09***21 | Plug | 2 |
| 23***98 | Stud | 1 |
315-7763 Drain Gp-Coolant
| 09***75 | Bolt; (25-mm Long) | 2 |
| 23***09 | Washer-Special | 1 |
| 23***31 | Cover | 1 |
315-8355 Housing & Regulator Gp
| 16***15 | Cap-Vented; (Coolant Recovery Tank) | 1 |
| 1P***78 | Clamp; (Hose) | 2 |
| 22***78 | Clamp-Tbolt; (M5x0.8) | 4 |
258-3552 Lines Gp-Water -Radiator
| 14***32 | Pin As | 1 |
| 17***55 | Pin | 2 |
| 20***76 | Stud-Ball | 4 |
258-3542 Mounting Gp-Rad & Oil Cooler
335-9117 Pump Gp-Water
| 03***65 | Cap As-Radiator; (Sea Water Heat Exchanger) | 1 |
| 06***80 | Fitting | 1 |
| 12***52 | Spacer; (10.5x20x28-mm Thk) | 1 |
315-7770 Pump Gp-Water
| 10***47 | Cover-Pump | 1 |
| 19***60 | Plug | 1 |
| 31***70 | Pump Group-Water | 1 |
258-3459 Radiator & Hyd Oil Cooler Gp
| 11***26 | Filter Element As-Air; (Primary) | 1 |
| 11***31 | Filter Element As-Air; (Secondary) | 1 |
| 11***17 | Valve-Dust; (Air Cleaner) | 1 |
Electrical And Starting System
315-8353 Alternator Gp-Charging
| 31***72 | Module Group-Interface; (Key) | 1 |
| 31***53 | Alternator Group-Charging | 1 |
| 6V***15 | Screw-Pan Head; (4-20x0.25-In) | 1 |
105-2814 Alternator Gp-Charging
| 03***05 | Terminal-Cable; (00-Ga, 5/16-In Screw) | 1 |
| 10***14 | Alternator Group-Charging | 1 |
| 11***16 | Block | 1 |
258-4121 Battery & Wiring Gp
| 11***71 | Puller-Minifuse | 1 |
| 25***27 | Screw-Truss Head; (No 12x17.46-mm) | 2 |
| 25***21 | Battery & Wiring Group | 1 |
310-5289 Control Gp-Machine
| 10***59 | Glow Plug | 4 |
| 25***90 | Plate-Connection | 1 |
| 31***89 | Control Group-Machine | 1 |
258-4144 Cover Gp-Fuse Panel
| 22***41 | Element As-Jacket Water Heater; (120-Volt, 530-Watt) | 1 |
| 22***42 | Heater Group-Jacket Water | 1 |
| 23***03 | Gasket | 1 |
258-4103 Electronics Gp-Machine
| 13***17 | Cap As-Dust | 1 |
| 21***12 | Cord As | 1 |
| 22***35 | Element As-Jacket Water Heater; (240-Volt, 530-Watt) | 1 |
347-4187 Electronics Gp-Monitor
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***17 | Tape; (5.5m) | 0 |
347-4186 Electronics Gp-Monitor -Monitor
| 15***28 | Spacer; (7x16x20-mm Thk) | 4 |
| 25***27 | Screw-Truss Head; (No 12x17.46-mm) | 9 |
| 25***48 | Plate As | 1 |
235-5904 Glow Plug Gp
| 15***71 | Kit-Connecting Plug; (4-Pin) | 0 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 2 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
218-0942 Heater Gp-Jacket Water
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***39 | Relay As | 3 |
218-0943 Heater Gp-Jacket Water
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 20***14 | Lens As; (Floodlight) | 1 |
| 21***43 | Heater Group-Jacket Water | 1 |
258-4145 Kit-Control Mounting -Product Link
| 10***53 | Case, Spacer; (Spherical) | 1 |
| 10***54 | Spacer; (Spherical) | 1 |
| 10***55 | Washer; (Spherical) | 1 |
258-4185 Kit-Security
| 10***53 | Case, Spacer; (Spherical) | 1 |
| 10***54 | Spacer; (Spherical) | 1 |
| 10***55 | Washer; (Spherical) | 1 |
328-2366 Kit-Wiring Harness -Accugrade
| 32***66 | Kit-Wiring Harness; -Accugrade | 1 |
| 9R***42 | Plug As | 1 |
| 9R***58 | Cord As | 1 |
258-4127 Kit-Work Tool Wiring
| 25***27 | Kit-Work Tool Wiring | 1 |
| 27***00 | Lens; (Amber)(Warning Beacon) | 1 |
| 9R***42 | Plug As | 1 |
234-4328 Lamp Gp-Flood -Front
| 23***28 | Lamp Group-Flood; -Front, Rear, Wide Range | 3 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
195-0190 Lamp Gp-Head & Signal -Lh-High, Low Beam
| 08***48 | Lamp; (12-Volt, 5-Watt) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
195-0189 Lamp Gp-Head & Signal -Rh-High, Low Beam
| 08***48 | Lamp; (12-Volt, 5-Watt) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
309-1325 Lamp Gp-Warning Beacon -Amber
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 26***23 | Switch As-Rocker; (Warning Beacon) | 1 |
128-6985 Lamp Gp-Warning Beacon -Amber, Magnetic Mount, Rotating
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 16***95 | Lens | 1 |
258-4164 Lighting Gp-Flood -Work Lights, Front
| 24***97 | Cable-Coiled; (Sensor) | 1 |
| 25***29 | Receiver Group-Laser; (Lr410) | 1 |
| 25***29 | Case-Carrying | 1 |
333-4957 Lighting Gp-Roading -Rear
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 3 |
| 33***57 | Lighting Group-Roading; -Rear | 1 |
258-4130 Lighting Gp-Roading -Head, Signal, Stop, Tail
| 1H***44 | Lockwasher (Bracket To Cab) | 2 |
| 25***30 | Lighting Group-Roading; -Head, Signal, Stop, Tail | 1 |
| 26***80 | Fuse; (20-Ampere)(Main) | 1 |
258-4169 Lighting Gp-Stop & Tail
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 17***49 | Strap; (Marker) | 1 |
| 25***69 | Lighting Group-Stop & Tail | 1 |
258-4184 Lighting Gp-Warning Beacon -Amber, Magnetic Mount, Rotating
| 25***84 | Lighting Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 30***87 | Control Group-Unprogrammed; (Transmission) | 1 |
| 35***39 | Software Group-Machine | 1 |
292-1271 Mast Gp -Accugrade Laser
| 29***71 | Mast Group; -Accugrade Laser | 1 |
| 34***36 | Control Group-Unprgmed Monitor; (Machine) | 1 |
| 35***58 | Software Group-Monitor | 1 |
258-4135 Relay Gp -Main Power
| 10***85 | Cap-Starting Motor | 1 |
| 10***12 | Kit-Contact; (Starting Motor) | 1 |
| 10***13 | Switch As; (Starting Motor)(12-Volt) | 1 |
266-1467 Sensor Gp-Position -Rotary
| 14***39 | Starting Motor Group-Electric; -12-Volt | 1 |
| 26***67 | Sensor Group-Position; -Brake Pedal | 1 |
262-3764 Sensor Gp-Speed
| 10***74 | Seal-Connector | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
191-8303 Sensor Gp-Speed
| 19***03 | Sensor Group-Speed | 1 |
| 32***52 | Switch-Oil Press; (Engine) | 1 |
287-6181 Starting Motor Gp-Electric
| 03***12 | Terminal-Ring; (2-Ga, 1/4-In Screw)(Circuit Breaker) | 1 |
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
143-0539 Starting Motor Gp-Electric
| 10***05 | Cap-Receptacle | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
300-1071 Switch Gp-Pressure
| 03***12 | Terminal-Ring; (2-Ga, 1/4-In Screw)(Circuit Breaker) | 1 |
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
258-4100 Wiring Gp-Cab
| 15***49 | Cable-Electrical; (03050 mm ) | 0 |
| 15***50 | Cable; (00-Ga, Black)(183-cm Each) | 0 |
| 17***20 | Strap-Dual Clamp | 5 |
258-4115 Wiring Gp-Engine
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
258-4192 Wiring Gp-Engine -Battery
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
336-0913 Wiring Gp-Grade Control
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***39 | Relay As | 5 |
258-4146 Wiring Gp-Heater
| 14***82 | Elbow As | 2 |
| 17***20 | Strap-Dual Clamp | 1 |
| 19***40 | Connector As | 1 |
258-4107 Wiring Gp-Machine
| 13***04 | Switch As-Pressure; (Power Train Oil Filter Bypass) | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
| 25***07 | Wiring Group-Machine | 1 |
258-4190 Wiring Gp-Quick Coupler
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***21 | Connector | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 4 |
258-4125 Wiring Gp-Work Tool
| 17***87 | Connector As | 1 |
| 1F***67 | Clip 7t***28 Cable As To Fan Shroud | 2 |
| 25***61 | Tube As | 1 |
Engine Arrangement
295-7114 Engine Ar
| 28***74 | Engine Ar-Primary | 1 |
| 29***14 | Engine Ar | 1 |
| 31***06 | Engine Ar-Primary | 1 |
287-8074 Engine Ar-Primary
| 23***80 | Valve Mechanism Group | 1 |
| 23***95 | Pump Group-Engine Oil | 1 |
| 23***04 | Glow Plug Group | 1 |
319-6806 Engine Ar-Primary
| 23***80 | Valve Mechanism Group | 1 |
| 23***95 | Pump Group-Engine Oil | 1 |
| 23***04 | Glow Plug Group | 1 |
295-7118 Installation Ar-Engine
| 25***47 | Mounting Group-Engine | 1 |
| 25***52 | Drain Group-Engine Oil | 1 |
| 25***65 | Lines Group-Air | 1 |
Frame And Body
258-3810 Conversion Ar-Roading -Germany
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 12***54 | Fastener; (Loop) (22cm) (X3) | 0 |
258-3809 Conversion Ar-Roading -Outside Nacd
| 17***16 | Chock | 1 |
| 25***09 | Conversion Ar-Roading; -Outside Nacd | 1 |
| 25***33 | Film-Notice; (Steering) | 1 |
315-6355 Conversion Ar-Roading
| 31***41 | Counterweight | 4 |
| 31***55 | Conversion Ar-Roading | 1 |
| 7X***49 | Bolt (M12x1.75x100mm); (M12x1.75x100-mm) | 4 |
258-3812 Conversion Ar-Roading -Italy
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***54 | Fastener; (Loop) (22cm) (X3) | 0 |
| 12***55 | Fastener-Hook; (18-cm Each) | 0 |
258-3800 Conversion Ar-Roading -Nacd
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 25***62 | Muffler & Mounting Group | 1 |
258-3841 Conversion Gp-Roading -Italy
| 25***78 | Plate As | 1 |
| 25***86 | Plate As | 1 |
| 25***12 | Plate | 1 |
258-3840 Conversion Gp-Roading -Germany
| 25***40 | Conversion Group-Roading; -Germany | 1 |
| 31***94 | Grill | 1 |
| 7T***99 | Link | 1 |
258-2591 Counterweight Gp
| 25***57 | Bearing-Sleeve | 4 |
| 25***91 | Counterweight Group | 1 |
| 25***94 | Link As | 1 |
322-1644 Door As-Access -Vented
| 22***15 | Plate As | 1 |
| 24***77 | Bolt; (M8x1.25x12-mm) | 1 |
| 32***44 | Door As-Access; -Vented | 1 |
258-2594 Enclosure Gp-Engine
| 25***94 | Enclosure Group-Engine | 1 |
| 31***41 | Counterweight | 2 |
| 7X***49 | Bolt (M12x1.75x100mm); (M12x1.75x100-mm) | 4 |
258-3675 Frame & Mtg Gp-Machine
| 25***75 | Frame & Mtg Group-Machine | 1 |
| 28***67 | Film-Instruction; (Service Chart, Read Omm)(Service Chart) | 1 |
| 28***68 | Film-Instruction; (Service Chart, Read Omm)(Service Chart) | 1 |
258-3674 Frame Gp-Machine -Lift Arm
| 12***18 | Seal; (1000-cm) | 0 |
| 17***79 | Insulation | 1 |
| 25***74 | Frame Group-Machine; -Lift Arm | 1 |
150-8621 Guide Gp-Lines
| 08***48 | Lamp; (12-Volt, 5-Watt) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
287-4160 Kit-Counterweight
| 17***91 | Nut-Spring | 4 |
| 17***16 | Chock | 1 |
| 25***33 | Film-Notice; (Steering) | 1 |
312-1024 Kit-Engine Enclosure -Vented
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
342-2684 Kit-Machine Enclosure Seal -Debris Barrier
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
311-8705 Kit-Machine Enclosure Seal -Debris Barrier
| 17***91 | Nut-Spring | 4 |
| 17***16 | Chock | 1 |
| 17***47 | Pin | 1 |
258-3884 Kit-Roading Conversion -Lights, Mirrors
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
315-7816 Kit-Roading Conversion -Italy
| 15***80 | Washer-Hard; (22x38x6-mm Thk) | 8 |
| 25***89 | Mount | 4 |
| 25***92 | Bracket As-Lift | 1 |
333-7434 Kit-Roading Conversion -Germany
| 15***80 | Washer-Hard; (22x38x6-mm Thk) | 8 |
| 25***89 | Mount | 4 |
| 25***91 | Plate-Lift | 4 |
333-7436 Kit-Roading Conversion -Front
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
315-7815 Kit-Roading Conversion -Germany
| 15***80 | Washer-Hard; (22x38x6-mm Thk) | 8 |
| 25***91 | Plate-Lift | 4 |
| 31***15 | Kit-Roading Conversion; -Germany | 1 |
333-7435 Kit-Roading Conversion -Italy
| 13***66 | Mirror Group-Rear View | 2 |
| 14***71 | Clamp; (Top)(Top) | 1 |
| 14***72 | Clamp; (Bottom)(Bottom) | 1 |
258-4410 Lifting Gp-Machine -Kit, Four Point
| 17***79 | Insulation | 2 |
| 25***10 | Lifting Group-Machine; -Kit, Four Point | 1 |
| 29***55 | Insulation | 1 |
258-4385 Lifting Gp-Machine -Four Point
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
| 17***20 | Strap-Dual Clamp | 5 |
258-4390 Lifting Gp-Machine -Kit, Single Point
| 17***79 | Insulation | 1 |
| 25***90 | Lifting Group-Machine; -Kit, Single Point | 1 |
| 26***78 | Insulation | 1 |
258-3872 Mirror & Mtg Gp-Rear View -With Roading Light Mount
| 25***72 | Mirror & Mtg Group-Rear View; -With Roading Light Mount | 1 |
| 30***53 | Axle As-Undercarriage; (Lh) | 1 |
| 30***54 | Axle As-Undercarriage; (Rh) | 1 |
258-3848 Mounting Gp-Registration -Italian
| 25***48 | Mounting Group-Registration; -Italian | 1 |
| 30***47 | Tube As | 1 |
| 30***55 | Name-Plate (Operation; Loader), Bearing-Sleeve, Name-Plate (Loader:Std) | 2 |
307-6237 Mounting Gp-Roading Lights -Kit, Germany, Italy
| 30***47 | Tube As | 1 |
| 30***55 | Name-Plate (Operation; Loader), Bearing-Sleeve, Name-Plate (Loader:Std) | 2 |
| 30***07 | Frame As; (Rh) | 1 |
258-3496 Suppression Gp-Sound -Machine
| 25***96 | Suppression Group-Sound; -Machine | 1 |
| 30***77 | Idler Group-Track | 1 |
| 30***88 | Roller Group-Track | 1 |
294-4560 Suppression Gp-Sound -Machine
| 29***60 | Suppression Group-Sound; -Machine | 1 |
| 30***78 | Idler Group-Track | 1 |
| 8T***39 | Washer; (6.0mm Thk)(M21.5x6x45mm) | 2 |
Fuel System
295-7465 Control Gp-Governor
| 06***80 | Fitting | 1 |
| 11***01 | Bowl As-Water Collection | 1 |
| 11***18 | Ring-Retaining | 1 |
295-7463 Control Gp-Governor
| 13***87 | Clip | 1 |
| 19***36 | Insert-Threaded; (M6x1-Thd) | 3 |
| 23***96 | Screw-Flat Head; (M6x1x35-mm) | 4 |
335-5751 Lines Gp-Fuel
| 09***35 | Cap | 1 |
| 11***63 | Support | 4 |
| 11***64 | Hose | 4 |
295-7029 Lines Gp-Fuel
| 09***35 | Cap | 1 |
| 11***63 | Support | 4 |
| 11***64 | Hose | 4 |
314-9909 Lines Gp-Fuel Injection
| 14***17 | Bolt; (M10x1.25x25-mm) | 1 |
| 19***56 | Clip | 1 |
| 19***33 | Bolt | 1 |
314-9911 Pump Gp-Fuel Injection
| 14***17 | Bolt; (M10x1.25x25-mm) | 1 |
| 19***56 | Clip | 1 |
| 19***33 | Bolt | 2 |
335-5752 Pump Gp-Fuel Injection
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 25***40 | Tank Group-Fuel | 1 |
258-3442 Pump Gp-Fuel Prm & Prim Filter -Water Separator
| 00***64 | Seal-O-Ring | 1 |
| 14***28 | Elbow | 1 |
| 23***37 | Fitting | 1 |
258-2439 Tank & Mtg Gp-Fuel
| 11***58 | Pulley-Alternator | 1 |
| 11***59 | Frame As-Alternator | 1 |
| 11***60 | Rotor As-Alternator | 1 |
258-2440 Tank Gp-Fuel
| 10***14 | Alternator Group-Charging | 1 |
| 23***62 | Plate | 1 |
| 23***73 | Bolt; (M10x1.5x90-mm) | 1 |
Hydraulic System
227-8807 Accumulator Gp-Hydraulic -Uncharged
| 02***87 | Fitting-Grease; (Universal Joint) | 2 |
| 22***07 | Accumulator Group-Hydraulic; -Uncharged | 1 |
| 26***40 | Kit-Seal; (Swing Cylinder) | 1 |
149-0686 Accumulator Gp-Hydraulic -Charged
| 02***87 | Fitting-Grease; (Universal Joint) | 2 |
| 14***86 | Accumulator Group-Hydraulic; -Charged | 1 |
| 26***40 | Kit-Seal; (Swing Cylinder) | 1 |
230-5406 Cylinder & Mtg Gp-Angle Blade
| 23***06 | Cylinder & Mtg Group-Angle Blade | 1 |
| 25***97 | Bearing-Sleeve | 1 |
| 27***70 | Kit-Seal; (Hydraulic Cylinder) | 1 |
231-5274 Cylinder & Mtg Gp-Angle Blade
| 21***24 | Kit-Seal; (Lift) | 2 |
| 23***74 | Cylinder & Mtg Group-Angle Blade | 1 |
| 25***14 | Cylinder Group-Tilt; -Rh | 1 |
293-6264 Cylinder Gp-Bucket
| 21***43 | Fitting As; (Quick Disconnect, Male) | 1 |
| 21***44 | Fitting As; (Quick Disconnect, Male) | 1 |
| 29***64 | Cylinder Group-Bucket | 1 |
255-0943 Cylinder Gp-Grapple
| 21***45 | Fitting As; (Quick Disconnect, Female) | 1 |
| 21***46 | Fitting As; (Quick Disconnect, Female) | 1 |
| 25***43 | Cylinder Group-Grapple | 1 |
278-1975 Cylinder Gp-Grapple -Industrial
| 27***75 | Cylinder Group-Grapple; -Industrial | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
| 30***52 | Tee | 1 |
274-9931 Cylinder Gp-Hydraulic -Angle Blade
| 25***78 | Lines Group-Hydraulic; -Work Tool Positioner | 1 |
| 25***69 | Manifold & Mtg Group-Control; -Work Tool Positioner | 1 |
| 27***31 | Cylinder Group-Hydraulic; -Angle Blade | 1 |
274-9930 Cylinder Gp-Hydraulic -Angle Blade
| 25***05 | Valve & Mtg Group-Control | 1 |
| 25***57 | Pump & Mtg Group-Work Tool; -High Flow | 1 |
| 25***86 | Lines Group-Hydraulic Fan | 1 |
225-9521 Cylinder Gp-Hydraulic -Angle Blade
| 22***21 | Cylinder Group-Hydraulic; -Angle Blade | 1 |
| 25***04 | Valve Group-Control | 1 |
| 25***56 | Pump & Mtg Group-Work Tool | 1 |
278-1969 Cylinder Gp-Hydraulic
| 25***07 | Pump & Mtg Group-Hydrostatic | 1 |
| 25***34 | Tank & Mtg Group-Hydraulic | 1 |
| 25***81 | Filter & Lines Group-Hydraulic | 1 |
192-2640 Cylinder Gp-Hydraulic -Coupler
| 19***40 | Cylinder Group-Hydraulic; -Coupler | 1 |
| 25***76 | Lines Group-Hydraulic | 1 |
258-2516 Cylinder Gp-Lift
| 25***04 | Valve Group-Control | 1 |
| 25***16 | Cylinder Group-Lift | 1 |
| 25***82 | Lines Group-Hydraulic Fan; -Radiator | 1 |
293-5713 Cylinder Gp-Lift
| 25***05 | Valve & Mtg Group-Control | 1 |
| 25***86 | Lines Group-Hydraulic Fan | 1 |
| 25***30 | Film Group; -High Flow Xps | 1 |
258-2559 Cylinder Gp-Lift Arm -Vertical Lift
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***13 | Coupling-Permanent | 1 |
293-5712 Cylinder Gp-Tilt -Lh
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
258-2514 Cylinder Gp-Tilt -Rh
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
293-5711 Cylinder Gp-Tilt -Rh
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
258-2515 Cylinder Gp-Tilt -Lh
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
218-5841 Fitting Gp-Hydraulic -Quick Disconnect, Female, High Flow
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
218-5840 Fitting Gp-Hydraulic -Quick Disconnect, Male, High Flow
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***95 | Fitting As; (Quick Disconnect, Male) | 1 |
285-2190 Fitting Gp-Hydraulic -Manual
| 14***19 | Connector As | 2 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
258-3731 Hydraulic Ar -Standard Flow
| 14***41 | Connector Group | 2 |
| 25***80 | Tube As | 1 |
| 25***81 | Tube As | 1 |
258-3734 Hydraulic Ar -High Flow
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***39 | Relay As | 1 |
| 14***15 | Connector As | 1 |
258-3183 Hydraulic Ar -High Flow
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***95 | Fitting As; (Quick Disconnect, Male) | 1 |
258-3358 Hydraulic Ar -Work Tool Positioner
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 16***89 | Hose As | 2 |
258-2426 Hydraulic Ar
| 14***15 | Connector As | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 6 |
| 14***42 | Connector Group | 2 |
258-3599 Hydraulic Ar -Common
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 16***89 | Hose As | 2 |
258-3181 Hydraulic Ar -Standard Flow
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 13***51 | Spacer; (11x19x6-mm Thk) | 1 |
| 14***25 | Connector As. | 4 |
258-3911 Kit-Quick Coupler Conversion -Hydraulic
| 11***61 | Hose As | 1 |
| 14***15 | Connector As | 2 |
| 14***16 | Connector Group | 2 |
294-5580 Kit-Work Tool Positioner -Self-Leveling Hydraulics
| 11***61 | Hose As | 1 |
| 14***15 | Connector As | 2 |
| 14***16 | Connector Group | 2 |
285-6113 Lines Gp-Bucket -Utility
| 06***58 | Clamp | 2 |
| 10***03 | Plate-Cover | 3 |
| 14***93 | Elbow Group | 2 |
279-5413 Lines Gp-Bucket -Multipurpose
| 11***49 | Fitting As; (Quick Disconnect) | 1 |
| 14***62 | Elbow Group | 1 |
| 15***49 | Elbow As | 1 |
279-5414 Lines Gp-Bucket -Multipurpose
| 15***49 | Elbow As | 1 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 2 |
| 19***08 | Adapter | 1 |
279-5416 Lines Gp-Bucket -Multipurpose
| 11***49 | Fitting As; (Quick Disconnect) | 1 |
| 14***52 | Elbow As. | 1 |
| 14***61 | Elbow Group | 1 |
154-5052 Lines Gp-Bucket
| 14***97 | Block | 2 |
| 15***52 | Lines Group-Bucket; -Multipurpose | 1 |
| 25***39 | Hose As | 4 |
279-5415 Lines Gp-Bucket -Multipurpose
| 11***49 | Fitting As; (Quick Disconnect) | 2 |
| 14***52 | Elbow As. | 1 |
| 14***61 | Elbow Group | 1 |
293-0140 Lines Gp-Bucket -Multipurpose
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 5 |
279-5412 Lines Gp-Bucket -Industrial
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
| 15***43 | Connector As. | 1 |
154-5019 Lines Gp-Bucket
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 14***11 | Plug Group | 1 |
| 15***19 | Lines Group-Bucket; -Multipurpose | 1 |
231-5273 Lines Gp-Connecting
| 10***03 | Plate-Cover | 3 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
| 14***93 | Elbow Group | 2 |
177-1986 Lines Gp-Connecting
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 13***51 | Spacer; (11x19x6-mm Thk) | 1 |
258-2425 Lines Gp-Coupler
| 14***86 | Accumulator Group-Hydraulic; -Charged | 1 |
| 19***03 | Elbow As | 1 |
| 19***31 | Elbow; (45-Deg) | 1 |
161-0187 Lines Gp-Grapple
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
| 15***43 | Connector As. | 1 |
286-9250 Lines Gp-Grapple
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
286-9279 Lines Gp-Grapple
| 23***79 | Cover | 1 |
| 25***11 | Manifold Group-Control; -Angling Blade | 1 |
| 28***79 | Lines Group-Grapple | 1 |
258-2876 Lines Gp-Hydraulic
| 25***76 | Lines Group-Hydraulic | 1 |
| 25***60 | Bracket As | 1 |
| 27***64 | Manifold Group-Control; -Motor, 2-Speed | 1 |
258-2878 Lines Gp-Hydraulic -Work Tool Positioner
| 25***02 | Manifold & Solenoid Group-Control; -Work Tool Positioner | 1 |
| 25***78 | Lines Group-Hydraulic; -Work Tool Positioner | 1 |
| 4P***34 | Clip-Ladder; (00800 mm ) | 1 |
258-2786 Lines Gp-Hydraulic Fan
| 18***51 | Washer-Hard; (5.3x8.8x2-mm Thk) | 8 |
| 19***08 | Seal-O-Ring | 1 |
| 21***14 | Seal-O-Ring | 1 |
258-2582 Lines Gp-Hydraulic Fan -Radiator
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 15***79 | Kit-Seal; (Relief Valve, Conveyor Cont) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
258-2780 Lines Gp-Hydraulic Oil Cooler
| 24***81 | Flange | 2 |
| 24***12 | Kit-Seal; (Solenoid Valve) | 1 |
| 25***34 | Valve Group-Solenoid; (Hydraulic Backup Engaged Gear) | 1 |
258-3595 Lines Gp-Lift Cylinder
| 24***81 | Flange | 2 |
| 24***12 | Kit-Seal; (Solenoid Valve) | 1 |
| 25***34 | Valve Group-Solenoid; (Hydraulic Backup Engaged Gear) | 1 |
258-3393 Lines Gp-Lowering Control -Manual
| 10***08 | Kit-Seal; (Solenoid Valve, Quick Steer) | 1 |
| 25***93 | Lines Group-Lowering Control; -Manual | 1 |
| 27***34 | Coil As; (12-Volt) | 2 |
258-3237 Lines Gp-Pump
| 23***28 | Coil As | 1 |
| 25***77 | Motor Group-Gear; (Fan, Demand) | 1 |
| 25***37 | Lines Group-Pump | 1 |
258-3238 Lines Gp-Pump -High Flow
| 15***13 | Plate | 1 |
| 15***41 | Pin | 2 |
| 15***42 | Pin | 2 |
258-3593 Lines Gp-Tilt Cylinder
| 25***60 | Pump Group-Gear | 1 |
| 25***93 | Lines Group-Tilt Cylinder | 1 |
| 27***60 | Washer-Hard; (15x22x2.5-mm Thk) | 4 |
258-3594 Lines Gp-Work Tool
| 11***04 | Bolt-Socket Head; (M12x1.75x45-mm) | 4 |
| 23***86 | Kit-Bearing; (Generator Pump) | 1 |
| 23***87 | Kit-Bearing; (Generator Pump) | 1 |
258-3350 Lines Gp-Work Tool -High Flow Xps
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 2 |
| 25***54 | Pump Group-Piston; -High Flow | 1 |
| 25***55 | Pump Group-Gear; (Work Tool Hydraulic) | 1 |
258-3462 Manf & Solenoid Mtg Gp-Accum -Pilot Shutoff
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 2 |
| 25***54 | Pump Group-Piston; -High Flow | 1 |
| 25***61 | Pump Group-Gear | 1 |
258-3394 Manifold & Lines Gp-Accum
| 25***35 | Tank Group-Hydraulic | 1 |
| 25***47 | Bracket | 1 |
| 25***49 | Bracket As | 1 |
258-3152 Manifold & Lines Gp-Control -Motor, 2-Speed
| 13***45 | Pad; (Connector) | 1 |
| 14***37 | Cap As-Filler; (Hydraulic Tank) | 1 |
| 25***06 | Tank Group-Hydraulic | 1 |
231-5278 Manifold & Mtg Gp-Control -Angling Blade
| 23***78 | Manifold & Mtg Group-Control; -Angling Blade | 1 |
| 25***04 | Strainer As; (Hydraulic Tank) | 1 |
| 26***90 | Gauge Group-Sight; (Hydraulic Tank) | 1 |
258-3463 Manifold & Mtg Gp-Control -Motor, 2-Speed
| 11***52 | Spacer; (13x25x22.14-mm Thk) | 2 |
| 23***25 | Stud; (M10x1.5-Thd) | 1 |
| 25***09 | Valve Group-Control | 1 |
258-3469 Manifold & Mtg Gp-Control -Work Tool Positioner
| 25***69 | Manifold & Mtg Group-Control; -Work Tool Positioner | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 6V***97 | Seal (Later Machines And Field Installed) | 1 |
258-2802 Manifold & Solenoid Gp-Control
| 11***52 | Spacer; (13x25x22.14-mm Thk) | 2 |
| 23***25 | Stud; (M10x1.5-Thd) | 1 |
| 25***08 | Valve Group-Control | 1 |
274-8563 Manifold Gp-Control -Pilot Shutoff
| 18***54 | Valve Group-Solenoid; -Auxiliary | 6 |
| 19***00 | Valve Group-Solenoid; -12-Volt-Work Tool | 2 |
| 20***71 | Cap | 1 |
258-9011 Manifold Gp-Control -Angling Blade
| 00***82 | Spring | 3 |
| 12***16 | Bolt-Shoulder | 1 |
| 14***31 | Valve-Check | 3 |
291-0010 Manifold Gp-Control -Quick Coupler
| 13***76 | Seal-O-Ring | 1 |
| 29***10 | Manifold Group-Control; -Quick Coupler | 1 |
274-8564 Manifold Gp-Control -Motor, 2-Speed
| 11***61 | Seal Kit; (Includes Seals, Thrust Ring, Stem And Connectors) | 1 |
| 20***71 | Valve Group-Manual; (Coupler Pin, Lift Arm Lwr Cont) | 1 |
| 20***73 | Valve Group-Manual; (Coupler Pin, Lift Arm Lwr Cont) | 1 |
258-2579 Motor & Mtg Gp-Hydraulic Fan
| 12***98 | Seat | 1 |
| 12***99 | Seat | 1 |
| 13***49 | Connector | 1 |
156-0891 Mounting Gp-Cylinder
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 20***71 | Kit-Seal; (Solenoid Valve) | 1 |
| 21***61 | Flange | 1 |
286-9248 Mounting Gp-Cylinder -Grapple Bucket
| 15***62 | Film-Information; (Tie-Down Location) | 2 |
| 18***33 | Step Group-Material Handling Arm | 1 |
| 21***50 | Arm As | 1 |
154-5011 Mounting Gp-Cylinder
| 15***11 | Mounting Group-Cylinder | 1 |
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
| 21***73 | Nut; (1/2-28-Thd) | 1 |
165-8731 Mounting Gp-Cylinder
| 11***37 | Washer; (46x70x1-mm Thk)(1mm`Thk) | 12 |
| 14***91 | Pin As | 2 |
| 14***94 | Pin | 1 |
258-3402 Pump & Mtg Gp-Gear
| 13***86 | Edge Group-Cutting | 1 |
| 17***81 | Blade Group-Angling | 1 |
| 17***83 | Spring Group-Blade | 1 |
258-2556 Pump & Mtg Gp-Work Tool
| 14***41 | Edge Group-Cutting | 1 |
| 17***82 | Blade Group-Angling | 1 |
| 17***83 | Spring Group-Blade | 1 |
258-2557 Pump & Mtg Gp-Work Tool -High Flow
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
258-2554 Pump Gp-Piston -High Flow
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
258-3401 Pump Gp-Piston & Gear
| 22***21 | Trunnion As | 1 |
| 22***79 | Plate As | 1 |
| 22***28 | Plate As | 1 |
258-2434 Tank & Mtg Gp-Hydraulic
| 22***21 | Trunnion As | 1 |
| 22***79 | Plate As | 1 |
| 22***28 | Plate As | 1 |
258-2435 Tank Gp-Hydraulic
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***40 | Pin | 2 |
| 16***19 | Pin As | 2 |
258-2806 Tank Gp-Hydraulic
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***40 | Pin | 2 |
| 16***19 | Pin As | 2 |
258-2505 Valve & Mtg Gp-Control
| 16***89 | Tack-Fastener | 4 |
| 22***45 | Edge Group-Bit & Cutting | 1 |
| 22***25 | Frame Group-Blade | 1 |
6e-4701 Valve Gp-Check
| 15***77 | Edge | 1 |
| 6E***01 | Valve Group-Check; -Pilot Oil | 1 |
336-1324 Valve Gp-Control -Lift Arm
| 15***59 | Edge | 1 |
| 33***24 | Valve Group-Control; -Lift Arm | 1 |
336-1325 Valve Gp-Control
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***87 | Blade Group-Multipurpose Bucket | 1 |
258-2508 Valve Gp-Control
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 25***08 | Valve Group-Control | 1 |
258-2509 Valve Gp-Control
| 15***37 | Edge | 1 |
| 25***09 | Valve Group-Control | 1 |
258-2504 Valve Gp-Control
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***80 | Blade Group-Multipurpose Bucket | 1 |
| 16***89 | Tack-Fastener | 4 |
112-1817 Valve Gp-Manual
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 15***77 | Edge | 1 |
295-1799 Valve Gp-Relief
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***95 | Blade Group-Multipurpose Bucket | 1 |
211-3014 Valve Gp-Shuttle -High Flow
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 21***14 | Valve Group-Shuttle; -High Flow | 1 |
185-4254 Valve Gp-Solenoid
| 18***54 | Valve Group-Solenoid; -Auxiliary | 1 |
| 19***16 | Edge | 1 |
195-9700 Valve Gp-Solenoid -12-Volt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 19***00 | Valve Group-Solenoid; -12-Volt-Work Tool | 1 |
Implements
258-2799 Pin & Link Gp-Lift Arm -With Support
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 25***99 | Pin & Link Group-Lift Arm; -With Support | 1 |
Lubrication System
314-9901 Filter Gp-Engine Oil
| 23***94 | Strainer As-Oil; (Engine) | 1 |
| 23***13 | Seal-O-Ring | 1 |
| 31***01 | Filter Group-Engine Oil | 1 |
287-5377 Lines Gp-Engine Oil
| 10***44 | Nut | 1 |
| 10***83 | Seal-O-Ring | 1 |
| 11***41 | Pump As-Oil | 1 |
235-5895 Pump Gp-Engine Oil
| 10***25 | Valve As; (Oil Bypass)(Engine) | 1 |
| 23***96 | Gasket | 1 |
| 23***96 | Gasket | 1 |
287-5665 Valve Gp-Engine Oil Relief
| 09***13 | Seal-O-Ring | 4 |
| 09***21 | Plug | 2 |
| 19***35 | Bolt; (M8x1.25x22-mm) | 13 |
Machine Arrangement
304-1920 Chassis Ar
| 15***21 | Guide Group-Lines | 1 |
| 25***39 | Tank & Mtg Group-Fuel | 1 |
| 25***59 | Cylinder Group-Lift Arm; -Vertical Lift | 1 |
304-1889 Common Ar
| 25***99 | Hydraulic Ar; -Common | 1 |
| 25***00 | Cab Ar-Enclosed Rops | 1 |
| 29***18 | Installation Ar-Engine | 1 |
342-5010 Control Ar-Machine -Aux Proportional Flow
| 25***03 | Control Group-Electrohydraulic; -Lh | 1 |
| 25***06 | Control Group-Electrohydraulic; -Rh | 1 |
| 34***10 | Control Ar-Machine; -Auxiliary Proportional Flow | 1 |
342-5009 Control Ar-Machine -On, Off Auxiliary Control
| 25***03 | Control Group-Electrohydraulic; -Lh | 1 |
| 25***05 | Control Group-Electrohydraulic; -Rh | 1 |
| 34***09 | Control Ar-Machine; -On, Off Auxiliary Control | 1 |
342-5011 Control Ar-Machine -Aux Proportional Flow
| 25***04 | Control Group-Electrohydraulic; -Lh, High Flow | 1 |
| 25***06 | Control Group-Electrohydraulic; -Rh | 1 |
| 25***25 | Wiring Group-Work Tool | 1 |
304-1923 Machine Ar-Special
| 25***52 | Manifold & Lines Group-Control; -Motor, 2-Speed | 1 |
| 25***58 | Hydraulic Ar; -Work Tool Positioner | 1 |
| 25***60 | Lines Group-Parking Brake | 1 |
304-1922 Machine Ar-Special
| 25***52 | Manifold & Lines Group-Control; -Motor, 2-Speed | 1 |
| 25***58 | Hydraulic Ar; -Work Tool Positioner | 1 |
| 25***60 | Lines Group-Parking Brake | 1 |
304-1911 Machine Ar-Special
| 25***26 | Hydraulic Ar | 1 |
| 25***52 | Manifold & Lines Group-Control; -Motor, 2-Speed | 1 |
| 25***60 | Lines Group-Parking Brake | 1 |
Operator Station
258-4229 Accessory Gp-Cab
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 2 |
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
176-3900 Accumulator Gp-Refrigerant -Uncharged
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 17***00 | Accumulator Group-Refrigerant; -With Desiccant | 1 |
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
186-6190 Accumulator Gp-Refrigerant -Charged
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
| 18***90 | Accumulator Group-Refrigerant; -With Desiccant | 1 |
| 21***89 | Screw; (M4x25-mm) | 3 |
258-4261 Air Conditioner & Mounting Gp
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
258-4260 Air Conditioner Ar
| 25***27 | Screw-Truss Head; (No 12x17.46-mm) | 2 |
| 25***28 | Plate | 1 |
| 25***94 | Insulation | 1 |
258-4290 Air Conditioner Gp
| 13***39 | Nut; (U-Type Retainer) | 10 |
| 21***06 | Screw-Truss Head; (M6x1x16-mm) | 10 |
| 25***27 | Screw-Truss Head; (No 12x17.46-mm) | 6 |
258-4311 Armrest & Mounting Gp
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 2 |
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
269-0257 Base As-Joystick -Rh
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 2 |
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
269-0258 Base As-Joystick -Lh
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 2 |
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
258-3680 Cab Ar-Enclosed Rops
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
258-4000 Cab Ar-Enclosed Rops
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
258-3742 Cab Ar-Enclosed Rops
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
298-7198 Cable Gp-Control -Manual Lowering
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
276-0074 Cable Gp-Control
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
258-2468 Compressor & Mtg Gp-Refrig
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
266-2425 Condenser & Mtg Gp-Refrigerant
| 15***80 | Washer-Hard; (22x38x6-mm Thk) | 8 |
| 25***89 | Mount | 4 |
| 25***98 | Film-Certification; (Ops, Read Omm) | 1 |
258-4280 Condenser & Mtg Gp-Refrigerant
| 14***71 | Louver As | 6 |
| 16***55 | Bolt; (M6x1x35-mm) | 2 |
| 20***85 | Bolt; (M8x1.25x35-mm) | 1 |
266-2430 Control & Wiring Gp-Air & Temp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***56 | Plug; (Switch) | 1 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
258-4299 Control Gp-Air & Temperature
| 25***46 | Wiring Group-Heater | 1 |
| 25***51 | Heater & Mtg Group-Cab | 1 |
| 25***52 | Duct & Filter Group-Cab Air | 1 |
258-3407 Control Gp-Electrohydraulic -Rh, High Flow
| 00***10 | Elbow | 1 |
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 2 |
| 10***74 | Seal-Connector | 2 |
258-3403 Control Gp-Electrohydraulic -Lh
| 10***74 | Seal-Connector | 3 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
258-3406 Control Gp-Electrohydraulic -Rh
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 16***72 | Speaker As-Radio | 2 |
| 17***37 | Connector; (Radio) | 1 |
258-3405 Control Gp-Electrohydraulic -Rh
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 16***72 | Speaker As-Radio | 2 |
| 17***37 | Connector; (Radio) | 1 |
258-3404 Control Gp-Electrohydraulic -Lh, High Flow
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
272-1790 Control Gp-Handle -Lh
| 12***70 | Screw-Machine; (M6x1x40-mm) | 3 |
| 17***91 | Nut-Spring | 3 |
| 25***79 | Knob As | 1 |
269-0264 Control Gp-Joystick -Rh
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***15 | Connector | 1 |
269-0263 Control Gp-Joystick -Rh, High Flow
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***15 | Connector | 1 |
269-0265 Control Gp-Joystick -Lh, High Flow
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***15 | Connector | 1 |
269-0262 Control Gp-Joystick -Rh
| 10***96 | Clip | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***11 | Support | 1 |
269-0266 Control Gp-Joystick -Lh
| 00***10 | Elbow | 1 |
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 2 |
| 10***74 | Seal-Connector | 2 |
258-4245 Cover Gp-Cab
| 25***85 | Window Group-Cab; -Side, Lh | 1 |
| 25***86 | Window Group-Cab; -Side, Rh | 1 |
| 25***45 | Cover Group-Cab | 1 |
258-4314 Cover Gp-Console -Rh, Lh
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 25***14 | Cover Group-Console; -Rh, Lh | 1 |
| 26***33 | Switch As-Rocker; (Control Pattern Change) | 1 |
258-4009 Cover Gp-Instrument Panel
| 25***09 | Cover Group-Instrument Panel | 1 |
| 28***81 | Spacer,10.4mm Id X 22mm Od X 35mm L; Spacing Bar, Spacer,10.4mm Id X 22mm Od X 35mm L, Film-Instruction; (Control Pattern, Rh) | 1 |
| 28***82 | Film-Instruction; (Control Pattern, Lh) | 1 |
258-4080 Door & Mtg Gp-Cab -With Cab Tilt Gas Spring
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 13***42 | Screw-Self-Tapping; (M5x2.3x18.8-mm) | 4 |
| 25***80 | Door & Mtg Group-Cab; -With Cab Tilt Gas Spring | 1 |
258-4070 Door & Mtg Gp-Cab -With Cab Tilt Gas Spring
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 13***42 | Screw-Self-Tapping; (M5x2.3x18.8-mm) | 4 |
| 25***70 | Door & Mtg Group-Cab; -With Cab Tilt Gas Spring | 1 |
258-4440 Door & Mtg Gp-Cab -With Cab Tilt Gas Spring
| 12***78 | Locknut; (M6x1-Thd) | 1 |
| 25***46 | Lever Group-Governor | 1 |
| 25***47 | Cable As | 1 |
258-4086 Door Gp-Cab -Glass
| 11***27 | Screw-Machine; (M6x1x30-mm) | 2 |
| 13***27 | Seal; (69-cm) | 0 |
| 17***22 | Seal; (230-cm Each) | 0 |
258-4442 Door Gp-Cab
| 10***96 | Clip | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***11 | Support | 1 |
258-4087 Door Gp-Cab -Polycarbonate
| 11***27 | Screw-Machine; (M6x1x30-mm) | 2 |
| 13***27 | Seal; (69-cm) | 0 |
| 17***22 | Seal; (230-cm Each) | 0 |
258-4252 Duct & Filter Gp-Cab Air
| 25***52 | Duct & Filter Group-Cab Air | 1 |
| 5P***58 | Sleeve; (Cable Splice) | 1 |
| 5P***00 | Key Total 2 Pieces Per Unit; (Literature Compartment) | 2 |
258-4400 Guard Gp-Rops/Fops -Kit
| 25***00 | Guard Group-Rops/Fops; -Kit | 1 |
| 28***70 | Mirror As; (Rear View) | 1 |
| 3B***05 | Washer,Lock Tube Assembly Mounting; Used On Engine P/N 5r698 | 1 |
298-7197 Handle Gp
| 21***84 | Mirror As | 1 |
| 29***97 | Handle Group | 1 |
| 3B***05 | Washer,Lock Tube Assembly Mounting; Used On Engine P/N 5r698 | 1 |
258-4251 Heater & Mtg Gp-Cab
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
| 25***51 | Heater & Mtg Group-Cab | 1 |
258-4250 Heater Ar-Cab
| 13***40 | Locknut; (M8x1.25-Thd) | 2 |
| 21***52 | Screw-Truss Head; (M8x1.25x30-mm) | 2 |
| 25***50 | Heater Ar-Cab | 1 |
258-4270 Heater Gp-Cab
| 09***65 | Spacer; (17x40x3-mm Thk) | 2 |
| 16***95 | Washer; (16.5x71.5x3-mm Thk) | 4 |
| 19***37 | Insert-Threaded; (M8x1.25-Thd) | 1 |
337-3991 Installation Gp-Radio -Kit
| 08***77 | Lamp Group-Dome; (12-Volt) | 1 |
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 74 |
| 09***34 | Terminal-Blade; (18-Ga To 22-Ga) | 4 |
258-4066 Installation Gp-Radio
| 25***17 | Spring Group-Gas; -Includes Lift Handle | 1 |
| 25***66 | Installation Group-Radio | 2 |
| 25***29 | Accessory Group-Cab | 1 |
258-2474 Kit-Air Cond & Heater Instl
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 13***42 | Screw-Self-Tapping; (M5x2.3x18.8-mm) | 4 |
| 25***74 | Kit-Air Cond & Heater Instl | 1 |
350-9038 Kit-Air Cond & Heater Instl
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 4 |
| 12***78 | Locknut; (M6x1-Thd) | 1 |
| 16***54 | Kit-Service; (Pedal) | 1 |
350-9039 Kit-Air Cond & Heater Instl
| 25***43 | Pedal Group-Governor | 1 |
| 25***73 | Cable As; (Hand Control) | 1 |
| 28***44 | Cable As; (Low Idle) | 1 |
305-8044 Kit-Air Conditioner Breather
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 4 |
| 12***78 | Locknut; (M6x1-Thd) | 1 |
| 16***54 | Kit-Service; (Pedal) | 1 |
258-2475 Kit-Air Conditioner Instl -Conversion
| 25***75 | Kit-Air Conditioner Instl; -Conversion | 1 |
| 25***73 | Cable As; (Hand Control) | 1 |
| 2R***64 | Ring-Retaining | 1 |
258-4443 Kit-Cab Door & Mounting
| 13***90 | Bushing; (Radio Mount) | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 17***37 | Connector; (Radio) | 1 |
258-2473 Kit-Cab Door & Mounting -Glass
| 19***54 | Sleeve | 1 |
| 25***73 | Kit-Cab Door & Mounting; -Glass | 1 |
280-6084 Kit-Cab Door & Mounting -Polycarbonate
| 19***54 | Sleeve | 1 |
| 28***84 | Kit-Cab Door & Mounting; -Polycarbonate | 1 |
280-6077 Kit-Cab Heater & Mounting
| 13***66 | Lead-Antenna | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 17***17 | Support-Radio | 1 |
258-2472 Kit-Cab Window -Side
| 19***54 | Sleeve | 1 |
| 25***72 | Kit-Cab Window; -Side | 1 |
258-4110 Kit-Control Pattern Change -Selectable
| 19***54 | Sleeve | 1 |
| 25***10 | Kit-Control Pattern Change; -Selectable | 1 |
292-7927 Kit-Control Pattern Change -Dedicated
| 13***90 | Bushing; (Radio Mount) | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 17***37 | Connector; (Radio) | 1 |
258-4111 Kit-Instrument Panel -Includes Creeper Control, Rh
| 13***90 | Bushing; (Radio Mount) | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 17***37 | Connector; (Radio) | 1 |
258-4045 Lever Gp-Governor
| 19***54 | Sleeve | 1 |
| 25***45 | Lever Group-Governor | 1 |
327-8941 Lever Gp-Governor
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 16***72 | Speaker As-Radio | 2 |
| 17***37 | Connector; (Radio) | 1 |
258-4020 Liner Gp-Cab
| 25***20 | Liner Group-Cab | 1 |
| 25***55 | Seat Group-Suspension; -Air | 1 |
| 25***11 | Armrest & Mounting Group | 1 |
258-4433 Liner Gp-Cab
| 15***83 | Washer-Hard; (8.4x35x2.5-mm Thk) | 4 |
| 25***02 | Seat & Armrest Group; -Suspension | 1 |
| 25***33 | Liner Group-Cab | 1 |
258-4265 Lines Gp-Air Conditioner
| 15***83 | Washer-Hard; (8.4x35x2.5-mm Thk) | 4 |
| 25***65 | Lines Group-Air Conditioner | 1 |
| 25***01 | Seat & Armrest Group | 1 |
258-4255 Lines Gp-Heater
| 25***51 | Seat & Mounting Group; -Suspension | 1 |
| 25***55 | Lines Group-Heater | 1 |
| 25***14 | Cover Group-Console; -Rh, Lh | 1 |
6v-1970 Literature Gp
| 25***52 | Seat & Mounting Group | 1 |
| 25***14 | Cover Group-Console; -Rh, Lh | 1 |
| 6V***70 | Literature Group; (Literature Compartment) | 1 |
258-4230 Mirror Gp-Rear View
| 25***30 | Mirror Group-Rear View | 1 |
| 2D***12 | Washer; (7/16x15/16x1/4-In Thk) | 2 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 2 |
305-8034 Mirror Gp-Rear View
| 2D***12 | Washer; (7/16x15/16x1/4-In Thk) | 2 |
| 30***34 | Mirror Group-Rear View | 1 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 2 |
330-5011 Motor Gp-Window Wiper
| 09***68 | Washer; (5x16x1.2-mm Thk) | 2 |
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 2 |
| 13***90 | Bolt-Carriage; (M8x1.25x30-mm) | 2 |
295-3171 Mounting Gp-Armrest -Lh
| 09***68 | Washer; (5x16x1.2-mm Thk) | 2 |
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 2 |
| 13***90 | Bolt-Carriage; (M8x1.25x30-mm) | 2 |
295-3172 Mounting Gp-Armrest -Rh
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 4 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
258-4220 Mounting Gp-Rops -Includes Step
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 4 |
| 1P***10 | Washer; (0.391x0.812x0.067-In Thk) | 4 |
| 25***20 | Mounting Group-Rops; -Includes Step | 1 |
258-3740 Option Ar-Cab
| 09***25 | Pin-Clevis | 1 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 2 |
| 15***82 | Spring-Gas; (Non-Locking) | 1 |
258-4163 Panel Gp-Instrument -Rh
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 2 |
| 09***78 | Pin-Spring | 1 |
| 14***08 | Fastener | 13 |
258-4162 Panel Gp-Instrument
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***11 | Screw-Machine; (3/8-16x0.75-In) | 1 |
325-8383 Pedal Gp-Governor
| 25***82 | Frame As; (Rh) | 1 |
| 25***65 | Latch As | 1 |
| 25***76 | Catch As; (Inner) | 1 |
280-6342 Pedal Gp-Governor
| 25***83 | Window As; (Lh Front Sliding Glass) | 1 |
| 25***84 | Window As; (Lh Rear Sliding Glass) | 1 |
| 25***65 | Latch As | 1 |
327-8937 Pedal Gp-Governor
| 10***57 | Strip; (Locking) (275cm) | 0 |
| 10***56 | Seal; (275cm) | 0 |
| 25***11 | Glass-Rear | 1 |
258-4043 Pedal Gp-Governor
| 1D***77 | Bolt-Round Head; (3/8-16x1-In) | 2 |
| 25***43 | Pedal Group-Governor | 1 |
| 5T***69 | Clamp | 2 |
284-8955 Radio Gp -Am/Fm/Wb/Sirius/ Cd Player
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 15***35 | Film-Warning; (Crush Hazard, Stay Back) | 1 |
| 22***42 | Film-Warning; (Crush Hazard, Stay Back, U.S.) | 2 |
262-9163 Radio Gp -Am/Fm Cassette
| 25***23 | Film-Identification; (Caterpillar) | 1 |
| 25***24 | Film-Identification; (Cat, Lh) | 1 |
| 25***25 | Film-Identification; (Cat, Rh) | 1 |
241-4936 Radio Gp -Am/Fm/Wb/Cd Player
| 24***36 | Radio Group; -Am/Fm/Wb/Cd Player | 1 |
| 29***10 | Film-Identification; (Two Speed) | 2 |
331-5292 Radio Gp -Am, Fm
| 19***10 | Film-Identification; (Synthetic Hydraulic Oil, Read Omm) | 2 |
| 33***92 | Radio Group; -Am/Fm/Wb | 1 |
288-1744 Radio Gp -Am/Fm/Wb/Cd Player
| 15***53 | Film-Information; (Read Omm) | 1 |
| 16***76 | Film; (Identification) (12v) (On Rear Console Behind Operators Seat) | 1 |
| 21***02 | Film-Warning; (No Weld, No Drill, Read Omm) | 1 |
337-3992 Radio Gp -Am/Fm
| 33***92 | Radio Group; -Am/Fm | 1 |
200-5729 Radio Gp -Am/Fm/Wb
| 20***29 | Radio Group; -Am/Fm/Wb | 1 |
| 25***85 | Window Group-Cab; -Side, Lh | 1 |
| 25***86 | Window Group-Cab; -Side, Rh | 1 |
331-5291 Radio Gp -Am/Fm/Wb/Cd Player
| 15***53 | Film-Information; (Read Omm) | 1 |
| 16***76 | Film; (Identification) (12v) (On Rear Console Behind Operators Seat) | 1 |
| 21***02 | Film-Warning; (No Weld, No Drill, Read Omm) | 1 |
233-3123 Radio Gp -Am/Fm/Wb
| 23***23 | Radio Group; -Am/Fm/Wb | 1 |
| 25***31 | Film-Identification; (High Flow Xps) | 2 |
284-8954 Radio Gp -Am/Fm/Wb/Xm/ Cd Player
| 12***59 | Clamp-Hose | 2 |
| 12***71 | Clamp-Hose | 1 |
| 18***07 | Clamp-Hose | 1 |
258-4401 Seat & Armrest Gp
| 25***01 | Seat & Armrest Group | 1 |
258-4402 Seat & Armrest Gp -Suspension
| 25***02 | Seat & Armrest Group; -Suspension | 1 |
258-4052 Seat & Mounting Gp
| 25***52 | Seat & Mounting Group | 1 |
258-4051 Seat & Mounting Gp -Suspension
| 25***51 | Seat & Mounting Group; -Suspension | 1 |
258-4320 Seat Ar-Suspension -Mechanical
| 25***20 | Seat Ar-Suspension; -Mechanical | 1 |
258-4330 Seat Ar-Suspension -Air
| 25***30 | Seat Ar-Suspension; -Air | 1 |
258-4095 Seat Belt Gp -Retractable
| 25***95 | Seat Belt Group; -Retractable | 1 |
258-4096 Seat Belt Gp -Retractable
| 25***96 | Seat Belt Group; -Retractable | 1 |
305-7096 Seat Gp -Vinyl
| 30***96 | Seat Group; -Vinyl | 1 |
273-5913 Seat Gp -Cloth, Suspension
| 27***13 | Seat Group; -Cloth, Suspension | 1 |
258-4054 Seat Gp-Suspension -Mechanical
| 25***54 | Seat Group-Suspension; -Mechanical | 1 |
258-4055 Seat Gp-Suspension -Air
| 25***55 | Seat Group-Suspension; -Air | 1 |
258-4017 Spring Gp-Gas -Includes Lift Handle
| 25***17 | Spring Group-Gas; -Includes Lift Handle | 1 |
273-9611 Suspension Gp-Seat -Mechanical
| 27***11 | Suspension Group-Seat; -Mechanical | 1 |
273-5914 Suspension Gp-Seat -Air
| 27***14 | Suspension Group-Seat; -Air | 1 |
258-4233 Visor Gp-Cab -Lh
| 25***33 | Visor Group-Cab; -Lh | 1 |
258-3497 Visor Gp-Cab
| 25***97 | Visor Group-Cab | 1 |
258-3285 Window Gp-Cab -Side, Lh
| 25***85 | Window Group-Cab; -Side, Lh | 1 |
258-3286 Window Gp-Cab -Side, Rh
| 25***86 | Window Group-Cab; -Side, Rh | 1 |
258-4090 Window Gp-Cab -Side
| 25***90 | Window Group-Cab; -Side | 1 |
258-4010 Window Gp-Cab
| 25***10 | Window Group-Cab | 1 |
Power Train
258-2581 Filter & Lines Gp-Hydraulic
| 10***93 | Poppet | 1 |
| 14***27 | Connector Group | 2 |
| 14***62 | Elbow Group | 1 |
223-9974 Filter Gp-Oil -Hydraulic
| 10***93 | Poppet | 1 |
| 14***27 | Connector Group | 2 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 1 |
258-3960 Lines Gp-Hydrostatic
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 4 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 2 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 4 |
258-3860 Lines Gp-Parking Brake
| 25***60 | Lines Group-Parking Brake | 1 |
| 27***23 | Kit-Cover | 1 |
| 27***25 | Kit-Duo-Cone Seal | 1 |
258-2589 Manifold Gp-Return
| 09***94 | Ring-Retaining | 1 |
| 16***42 | Washer-Hard; (14.8x27x3-mm Thk) | 2 |
| 16***39 | Bolt; (M14x2x40-mm) | 2 |
304-1860 Motor & Mtg Gp-Hydrostatic
| 27***36 | Kit-Seal; (Piston Pump) | 1 |
| 27***37 | Valve Group-Pump Control | 2 |
| 27***38 | Kit-Piston | 2 |
307-3045 Motor Gp-Piston
| 30***16 | Sprocket-Track | 1 |
| 30***45 | Pipe, Motor Group-Piston | 1 |
| 3E***56 | Washer-Hard; (17.5x30x6-mm Thk) | 12 |
258-3318 Mounting Gp-Pump
| 25***62 | Muffler & Mounting Group | 1 |
| 25***79 | Motor & Mtg Group-Hydraulic Fan | 1 |
| 25***18 | Mounting Group-Pump | 1 |
258-2407 Pump & Mtg Gp-Hydrostatic
| 25***07 | Pump & Mtg Group-Hydrostatic | 1 |
| 25***62 | Muffler & Mounting Group | 1 |
| 25***79 | Motor & Mtg Group-Hydraulic Fan | 1 |
258-2405 Pump Gp-Piston -Hydrostatic
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 25***05 | Pump Group-Piston; -Hydrostatic | 1 |
304-1918 Sprocket Gp
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 25***62 | Muffler & Mounting Group | 1 |
Service Equipment And Supplies
289-0848 Film Gp -2-Speed
| 28***48 | Film Group; -2-Speed | 1 |
304-1963 Film Gp
| 30***63 | Film Group | 1 |
258-3230 Film Gp -High Flow Xps
| 25***30 | Film Group; -High Flow Xps | 1 |
348-6735 Kit-Muffler
| 34***35 | Kit-Muffler | 1 |
286-9251 Plate & Film Gp
| 28***51 | Plate & Film Group | 1 |
304-1864 Plate & Film Gp
| 30***64 | Plate & Film Group | 1 |
247-0678 Plate & Film Gp
| 24***78 | Plate & Film Group | 1 |
304-1862 Plate & Film Gp
| 30***62 | Plate & Film Group | 1 |
304-5237 Plate & Film Gp
| 30***37 | Plate & Film Group | 1 |
Undercarriage
304-1850 Axle Gp-Undercarriage
| 16***66 | Toric Ring | 2 |
| 17***82 | Seal Group-Duo-Cone | 2 |
| 30***50 | Axle Group-Undercarriage | 1 |
356-2467 Frame Gp-Track Roller -Rh
| 30***90 | Roller Group-Track; -Triple Flange | 1 |
| 35***67 | Frame Group-Track Roller; -Rh | 1 |
| 8T***39 | Washer; (6.0mm Thk)(M21.5x6x45mm) | 2 |
356-2463 Frame Gp-Track Roller -Lh
| 30***25 | Plate | 4 |
| 30***39 | Tape (Accent Stripe), Spacer | 4 |
| 35***63 | Frame Group-Track Roller; -Lh | 1 |
304-1904 Frame Gp-Track Roller -Rh
| 16***66 | Toric Ring | 2 |
| 17***82 | Seal Group-Duo-Cone | 2 |
| 30***75 | Collar-Seal | 1 |
304-1903 Frame Gp-Track Roller -Lh
| 30***94 | Idler Group-Track | 1 |
| 30***03 | Frame Group-Track Roller; -Lh | 1 |
| 8T***39 | Washer; (6.0mm Thk)(M21.5x6x45mm) | 2 |
304-1908 Idler Gp-Front
| 10***88 | Ring-Retaining | 2 |
| 17***83 | Seal Group-Duo-Cone | 2 |
| 21***42 | Ring-Toric | 2 |
304-1893 Idler Gp-Track
| 30***88 | Roller Group-Track | 4 |
| 30***93 | Manifold, Idler Group-Track | 2 |
| 30***98 | Track Adjuster & Recoil Group | 1 |
304-1877 Idler Gp-Track
| 09***59 | Pin-Cotter | 1 |
| 22***82 | Seal-Wiper | 1 |
| 23***92 | Fitting-Grease | 1 |
304-1894 Idler Gp-Track
| 30***60 | Motor & Mtg Group-Hydrostatic | 1 |
| 30***94 | Idler Group-Track | 1 |
| 30***01 | Undercarriage Ar; -Lh | 1 |
304-1878 Idler Gp-Track
| 30***78 | Idler Group-Track | 1 |
| 30***88 | Roller Group-Track | 4 |
| 30***93 | Manifold, Idler Group-Track | 1 |
304-1852 Mounting Gp-Axle
| 30***52 | Mounting Group-Axle | 1 |
304-1890 Roller Gp-Track -Triple Flange
| 06***43 | Ring-Snap | 1 |
| 21***55 | Pin As | 1 |
| 21***43 | Bushing | 1 |
304-1888 Roller Gp-Track
| 30***88 | Roller Group-Track | 1 |
304-1898 Track Adjuster & Recoil Gp
| 23***66 | Pin As | 6 |
| 23***99 | Spacer; (25.4x28.4x13-mm Thk) | 12 |
| 24***70 | Spacer; (8.2x13x6-mm Thk) | 6 |
304-1919 Undercarriage Ar
| 25***97 | Bearing-Sleeve | 1 |
| 25***42 | Bearing-Sleeve | 1 |
| 27***70 | Kit-Seal; (Hydraulic Cylinder) | 1 |
304-1902 Undercarriage Ar -Rh
| 25***97 | Bearing-Sleeve | 1 |
| 28***91 | Kit-Seal | 1 |
| 2K***21 | Locknut (5/8-18 Thd) | 1 |
356-2462 Undercarriage Ar -Lh
| 35***62 | Undercarriage Ar; -Lh | 1 |
304-1901 Undercarriage Ar -Lh
| 26***41 | Kit-Seal | 1 |
| 30***01 | Undercarriage Ar; -Lh | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
356-2465 Undercarriage Ar -Rh
| 17***58 | Kit-Seal | 1 |
| 21***55 | Rod End As | 1 |
| 35***65 | Undercarriage Ar; -Rh | 1 |
Work Tools
216-8756 Arm Gp-Material Handling
| 15***37 | Edge | 1 |
| 21***56 | Arm Group-Material Handling | 1 |
| 32***34 | Guard As; (60-In) | 1 |
177-1989 Blade Ar -Angling
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 17***89 | Blade Ar; -Angling | 1 |
177-1990 Blade Ar -Angling
| 15***59 | Edge | 1 |
| 17***90 | Blade Ar; -Angling | 1 |
| 32***44 | Guard As; (66-In) | 1 |
231-5275 Blade Ar -Angling
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 23***75 | Blade Ar; -Angling | 1 |
231-5277 Blade Ar -Angling
| 15***77 | Edge | 1 |
| 23***77 | Blade Ar; -Angling | 1 |
| 32***54 | Guard As; (72-In) | 1 |
177-1987 Blade As-Angling
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 17***87 | Blade As-Angling | 1 |
222-7412 Blade As-Angling
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 22***12 | Blade As-Angling | 1 |
230-4596 Blade As-Angling
| 23***96 | Blade As-Angling | 1 |
| 29***44 | Edge | 1 |
| 32***74 | Guard As; (84-In) | 1 |
177-1988 Blade As-Angling
| 17***88 | Blade As-Angling | 1 |
| 19***16 | Edge | 1 |
| 32***64 | Guard As; (78-In) | 1 |
222-7724 Blade Gp-Angling
| 13***84 | Edge Group-Cutting | 1 |
| 22***24 | Blade Group-Angling | 1 |
| 27***37 | Bucket As-Dirt | 1 |
177-1981 Blade Gp-Angling
| 13***87 | Edge Group-Cutting | 1 |
| 17***81 | Blade Group-Angling | 1 |
| 26***84 | Bucket Group-Dirt | 1 |
231-5276 Blade Gp-Angling
| 13***85 | Edge Group-Cutting | 1 |
| 23***76 | Blade Group-Angling | 1 |
| 27***40 | Bucket As-Dirt | 1 |
177-1982 Blade Gp-Angling
| 13***83 | Edge Group-Cutting | 1 |
| 17***82 | Blade Group-Angling | 1 |
| 27***34 | Bucket As-Dirt | 1 |
325-7038 Blade Gp-Multipurpose Bucket
| 15***86 | Bucket Group-Grapple; -Industrial | 1 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***87 | Lines Group-Grapple; -Industrial | 1 |
279-5395 Blade Gp-Multipurpose Bucket
| 13***87 | Edge Group-Cutting | 1 |
| 27***76 | Bucket As-General Purpose | 1 |
| 27***95 | Blade Group-Multipurpose Bucket | 1 |
325-7068 Blade Gp-Multipurpose Bucket
| 28***00 | Bucket Ar-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
| 32***68 | Blade Group-Multipurpose Bucket | 1 |
279-5385 Blade Gp-Multipurpose Bucket
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
325-7059 Blade Gp-Multipurpose Bucket
| 13***87 | Edge Group-Cutting | 1 |
| 21***29 | Bucket Ar-Grapple | 1 |
| 32***59 | Blade Group-Multipurpose Bucket | 1 |
325-7048 Blade Gp-Multipurpose Bucket
| 13***85 | Edge Group-Cutting | 1 |
| 15***24 | Bucket Ar-Grapple | 1 |
| 32***48 | Blade Group-Multipurpose Bucket | 1 |
325-7049 Blade Gp-Multipurpose Bucket
| 13***86 | Edge Group-Cutting | 1 |
| 15***25 | Bucket Ar-Grapple; -Industrial | 1 |
| 32***49 | Blade Group-Multipurpose Bucket | 1 |
325-7079 Blade Gp-Multipurpose Bucket
| 28***44 | Bucket Group-Grapple | 1 |
| 28***48 | Mounting Group-Cylinder; -Grapple Bucket | 1 |
| 28***50 | Lines Group-Grapple | 1 |
159-5347 Blade Gp-Multipurpose Bucket
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 15***47 | Blade Group-Multipurpose Bucket | 1 |
159-5345 Blade Gp-Multipurpose Bucket
| 13***84 | Edge Group-Cutting | 1 |
| 15***45 | Blade Group-Multipurpose Bucket | 1 |
| 27***64 | Bucket As-General Purpose | 1 |
293-0142 Blade Gp-Multipurpose Bucket
| 15***85 | Bucket Group-Grapple; -Industrial | 1 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***87 | Lines Group-Grapple; -Industrial | 1 |
279-5388 Blade Gp-Multipurpose Bucket
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
325-7058 Blade Gp-Multipurpose Bucket
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***87 | Lines Group-Grapple; -Industrial | 1 |
| 21***28 | Bucket Group-Grapple | 1 |
325-7069 Blade Gp-Multipurpose Bucket
| 28***01 | Bucket Ar-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
| 32***69 | Blade Group-Multipurpose Bucket | 1 |
279-5384 Blade Gp-Multipurpose Bucket
| 13***85 | Edge Group-Cutting | 1 |
| 27***68 | Bucket As-General Purpose | 1 |
| 27***84 | Blade Group-Multipurpose Bucket | 1 |
325-7039 Blade Gp-Multipurpose Bucket
| 13***84 | Edge Group-Cutting | 1 |
| 15***23 | Bucket Ar-Grapple | 1 |
| 32***39 | Blade Group-Multipurpose Bucket | 1 |
279-5387 Blade Gp-Multipurpose Bucket
| 13***86 | Edge Group-Cutting | 1 |
| 27***72 | Bucket As-General Purpose | 1 |
| 27***87 | Blade Group-Multipurpose Bucket | 1 |
279-5396 Blade Gp-Multipurpose Bucket
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 9 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
325-7078 Blade Gp-Multipurpose Bucket
| 28***48 | Mounting Group-Cylinder; -Grapple Bucket | 1 |
| 28***51 | Plate & Film Group | 1 |
| 28***78 | Bucket Group-Grapple | 1 |
154-5080 Blade Gp-Multipurpose Bucket
| 13***86 | Edge Group-Cutting | 1 |
| 15***80 | Blade Group-Multipurpose Bucket | 1 |
| 28***89 | Bucket As-Dirt | 1 |
279-5406 Blade Gp-Multipurpose Bucket
| 15***84 | Bucket Group-Grapple; -Industrial | 1 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***87 | Lines Group-Grapple; -Industrial | 1 |
279-5405 Blade Gp-Multipurpose Bucket
| 19***24 | Edge Group-Cutting | 1 |
| 27***05 | Blade Group-Multipurpose Bucket | 1 |
| 29***70 | Bucket As-General Purpose; -High Capacity | 1 |
285-6090 Bucket Ar-Dirt
| 15***05 | Bucket Group-Multipurpose | 1 |
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***19 | Lines Group-Bucket; -Multipurpose | 1 |
279-5435 Bucket Ar-Dirt
| 13***87 | Edge Group-Cutting | 1 |
| 27***24 | Bucket As-Light Material | 1 |
| 27***35 | Bucket Ar-Dirt | 1 |
279-5438 Bucket Ar-Dirt
| 19***24 | Edge Group-Cutting | 1 |
| 27***29 | Bucket As-Light Material | 1 |
| 27***38 | Bucket Ar-Dirt | 1 |
279-5441 Bucket Ar-Dirt
| 27***41 | Bucket Ar-Dirt | 1 |
| 29***23 | Bucket As-Light Material, Wheel Disc | 1 |
| 29***80 | Edge Group-Cutting | 1 |
268-4083 Bucket Ar-Dirt
| 13***86 | Edge Group-Cutting | 1 |
| 26***83 | Bucket Ar-Dirt | 1 |
| 27***21 | Bucket As-Light Material | 1 |
279-5370 Bucket Ar-General Purpose
| 13***84 | Edge Group-Cutting | 1 |
| 27***70 | Bucket Ar-General Purpose | 1 |
| 27***82 | Bucket Ar-Multipurpose | 1 |
279-5366 Bucket Ar-General Purpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 15***04 | Bucket Ar-Multipurpose | 1 |
296-8192 Bucket Ar-General Purpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 16***36 | Cover Group-Lines | 1 |
| 27***69 | Cylinder Group-Hydraulic | 2 |
279-5373 Bucket Ar-General Purpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 16***36 | Cover Group-Lines | 1 |
| 27***69 | Cylinder Group-Hydraulic | 2 |
279-5377 Bucket Ar-General Purpose
| 13***85 | Edge Group-Cutting | 1 |
| 27***77 | Bucket Ar-General Purpose | 1 |
| 27***90 | Bucket Ar-Multipurpose | 1 |
279-5378 Bucket Ar-General Purpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
279-5369 Bucket Ar-General Purpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
279-5365 Bucket Ar-General Purpose
| 15***09 | Bucket Group-Multipurpose | 1 |
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***52 | Lines Group-Bucket; -Multipurpose | 1 |
279-5374 Bucket Ar-General Purpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 16***36 | Cover Group-Lines | 1 |
| 27***69 | Cylinder Group-Hydraulic | 2 |
286-9301 Bucket Ar-Grapple
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
157-7223 Bucket Ar-Grapple
| 13***86 | Edge Group-Cutting | 1 |
| 15***23 | Bucket Ar-Grapple | 1 |
| 27***98 | Bucket Ar-Multipurpose | 1 |
157-7227 Bucket Ar-Grapple
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***27 | Bucket Ar-Grapple; -Industrial | 1 |
| 16***36 | Cover Group-Lines | 1 |
157-7224 Bucket Ar-Grapple
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 15***24 | Bucket Ar-Grapple | 1 |
285-6112 Bucket Ar-Grapple
| 15***11 | Mounting Group-Cylinder | 1 |
| 16***36 | Cover Group-Lines | 1 |
| 27***69 | Cylinder Group-Hydraulic | 2 |
217-6230 Bucket Ar-Grapple
| 19***24 | Edge Group-Cutting | 1 |
| 21***30 | Bucket Ar-Grapple | 1 |
| 29***39 | Engine; - Assembly, Bucket Ar-Multipurpose | 1 |
157-7226 Bucket Ar-Grapple
| 13***87 | Edge Group-Cutting | 1 |
| 15***26 | Bucket Ar-Grapple; -Industrial | 1 |
| 27***03 | Bucket Ar-Multipurpose | 1 |
157-7225 Bucket Ar-Grapple -Industrial
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 9 |
| 15***25 | Bucket Ar-Grapple; -Industrial | 1 |
286-9300 Bucket Ar-Grapple
| 13***84 | Edge Group-Cutting | 1 |
| 28***00 | Bucket Ar-Grapple | 1 |
| 32***36 | Bucket Ar-Multipurpose, Protective Cover | 1 |
285-6111 Bucket Ar-Grapple
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
158-6095 Bucket Ar-Grapple
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***95 | Bucket Ar-Grapple; -Industrial | 1 |
| 16***36 | Cover Group-Lines | 1 |
217-6229 Bucket Ar-Grapple
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 9 |
| 21***29 | Bucket Ar-Grapple | 1 |
279-5430 Bucket Ar-Light Material
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
279-5425 Bucket Ar-Light Material
| 13***85 | Edge Group-Cutting | 1 |
| 27***25 | Bucket Ar-Light Material | 1 |
| 32***46 | Bucket Ar-Multipurpose | 1 |
296-7597 Bucket Ar-Light Material
| 15***11 | Mounting Group-Cylinder | 1 |
| 16***36 | Cover Group-Lines | 1 |
| 27***69 | Cylinder Group-Hydraulic | 2 |
279-5420 Bucket Ar-Light Material
| 15***11 | Mounting Group-Cylinder | 1 |
| 16***36 | Cover Group-Lines | 1 |
| 27***69 | Cylinder Group-Hydraulic | 2 |
279-5400 Bucket Ar-Multipurpose
| 14***35 | Edge | 1 |
| 27***00 | Bucket Ar-Multipurpose | 1 |
325-7076 Bucket Ar-Multipurpose
| 19***22 | Edge | 1 |
| 32***76 | Bucket Ar-Multipurpose | 1 |
325-7036 Bucket Ar-Multipurpose
| 14***35 | Edge | 1 |
| 32***36 | Bucket Ar-Multipurpose, Protective Cover | 1 |
325-7055 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 28***88 | Bucket As-Dirt | 1 |
296-8057 Bucket Ar-Multipurpose
| 14***34 | Edge | 1 |
| 29***57 | Bucket Ar-Multipurpose | 1 |
279-5391 Bucket Ar-Multipurpose
| 13***84 | Edge Group-Cutting | 1 |
| 27***91 | Bucket Ar-Multipurpose | 1 |
| 28***96 | Bucket Group-Utility | 1 |
325-7056 Bucket Ar-Multipurpose
| 14***35 | Edge | 1 |
| 32***56 | Bucket Ar-Multipurpose | 1 |
325-7045 Bucket Ar-Multipurpose
| 14***36 | Edge | 1 |
| 32***45 | Bucket Ar-Multipurpose | 1 |
279-5392 Bucket Ar-Multipurpose
| 13***85 | Edge Group-Cutting | 1 |
| 27***92 | Bucket Ar-Multipurpose | 1 |
| 28***99 | Bucket Group-Utility | 1 |
325-7060 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***63 | Bucket As-General Purpose | 1 |
325-7065 Bucket Ar-Multipurpose
| 14***36 | Edge | 1 |
| 32***65 | Bucket Ar-Multipurpose | 1 |
279-5399 Bucket Ar-Multipurpose
| 14***36 | Edge | 1 |
| 27***99 | Bucket Ar-Multipurpose | 1 |
325-7046 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***39 | Bucket As-Dirt | 1 |
279-5398 Bucket Ar-Multipurpose
| 13***86 | Edge Group-Cutting | 1 |
| 27***98 | Bucket Ar-Multipurpose | 1 |
| 28***02 | Bucket Group-Utility | 1 |
325-7080 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***75 | Bucket As-General Purpose | 1 |
293-0139 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 18***16 | Bucket As-Dirt | 1 |
279-5401 Bucket Ar-Multipurpose
| 15***27 | Bucket As-Dirt | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
296-8055 Bucket Ar-Multipurpose
| 19***22 | Edge | 1 |
| 29***55 | Bucket Ar-Multipurpose | 1 |
154-5010 Bucket Ar-Multipurpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 9 |
| 15***10 | Bucket Ar-Multipurpose | 1 |
279-5390 Bucket Ar-Multipurpose
| 19***24 | Edge Group-Cutting | 1 |
| 27***90 | Bucket Ar-Multipurpose | 1 |
| 32***76 | Bucket Ar-Multipurpose | 1 |
279-5403 Bucket Ar-Multipurpose
| 14***37 | Edge | 1 |
| 27***03 | Bucket Ar-Multipurpose | 1 |
325-7070 Bucket Ar-Multipurpose
| 14***37 | Edge | 1 |
| 32***70 | Bucket Ar-Multipurpose | 1 |
279-5381 Bucket Ar-Multipurpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 9 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
279-5402 Bucket Ar-Multipurpose
| 14***04 | Bucket As-Dirt | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
154-5004 Bucket Ar-Multipurpose
| 13***86 | Edge Group-Cutting | 1 |
| 15***04 | Bucket Ar-Multipurpose | 1 |
| 32***56 | Bucket Ar-Multipurpose | 1 |
325-7035 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***33 | Bucket As-Dirt | 1 |
154-5046 Bucket Ar-Multipurpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***46 | Bucket Ar-Multipurpose | 1 |
| 16***36 | Cover Group-Lines | 1 |
325-7050 Bucket Ar-Multipurpose
| 14***37 | Edge | 1 |
| 32***50 | Bucket Ar-Multipurpose | 1 |
325-7040 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***36 | Bucket As-Dirt | 1 |
279-5382 Bucket Ar-Multipurpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 16***36 | Cover Group-Lines | 1 |
| 27***69 | Cylinder Group-Hydraulic | 2 |
325-7066 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***67 | Bucket As-General Purpose | 1 |
279-5380 Bucket Ar-Multipurpose
| 13***87 | Edge Group-Cutting | 1 |
| 27***80 | Bucket Ar-Multipurpose | 1 |
| 32***66 | Bucket Ar-Multipurpose | 1 |
325-7075 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***71 | Bucket As-General Purpose | 1 |
285-6100 Bucket Ar-Utility
| 22***32 | Edge | 1 |
| 28***00 | Bucket Ar-Utility | 1 |
285-6101 Bucket Ar-Utility
| 14***35 | Edge | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
| 28***01 | Bucket Ar-Utility | 1 |
285-6095 Bucket Ar-Utility
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 28***95 | Bucket Ar-Utility | 1 |
285-6089 Bucket As-Dirt
| 28***89 | Bucket As-Dirt | 1 |
| 29***57 | Edge | 1 |
279-5434 Bucket As-Dirt
| 14***37 | Edge | 1 |
| 27***34 | Bucket As-Dirt | 1 |
165-6156 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***87 | Bucket As-Grapple; -Industrial | 1 |
| 16***56 | Bucket As-Dirt | 1 |
268-4089 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 21***26 | Bucket As-Grapple | 1 |
279-5439 Bucket As-Dirt
| 22***82 | Edge | 1 |
| 27***39 | Bucket As-Dirt | 1 |
279-5437 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***23 | Bucket As-Light Material | 1 |
188-2716 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***89 | Bucket As-Grapple | 1 |
| 16***89 | Tack-Fastener | 4 |
285-6088 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 28***88 | Bucket As-Dirt | 1 |
279-5433 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***22 | Bucket As-Light Material | 1 |
165-6157 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***88 | Bucket As-Grapple | 1 |
| 16***57 | Bucket As-Dirt | 1 |
188-3526 Bucket As-Dirt
| 16***30 | Plate-Identification; (Cat) | 2 |
| 18***26 | Bucket As-Dirt | 1 |
| 19***22 | Edge | 1 |
141-6704 Bucket As-Dirt
| 14***04 | Bucket As-Dirt | 1 |
| 14***36 | Edge | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
152-0227 Bucket As-Dirt
| 14***37 | Edge | 1 |
| 15***27 | Bucket As-Dirt | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
279-5436 Bucket As-Dirt
| 19***22 | Edge | 1 |
| 27***36 | Bucket As-Dirt | 1 |
279-5440 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***28 | Bucket As-Light Material | 1 |
279-5368 Bucket As-General Purpose
| 14***35 | Edge | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
| 27***68 | Bucket As-General Purpose | 1 |
279-5367 Bucket As-General Purpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***37 | Bucket As-Utility | 1 |
| 16***89 | Tack-Fastener | 4 |
279-5375 Bucket As-General Purpose
| 14***37 | Edge | 1 |
| 27***75 | Bucket As-General Purpose | 1 |
279-5363 Bucket As-General Purpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***32 | Bucket As-Utility | 1 |
| 16***89 | Tack-Fastener | 4 |
292-9270 Bucket As-General Purpose -High Capacity
| 13***85 | Edge Group-Cutting | 1 |
| 16***57 | Bucket As-Dirt | 1 |
| 29***70 | Bucket As-General Purpose; -High Capacity | 1 |
279-5371 Bucket As-General Purpose
| 14***35 | Edge | 1 |
| 27***71 | Bucket As-General Purpose | 1 |
279-5364 Bucket As-General Purpose
| 11***83 | Boss; (M10x1.5-Thd) | 4 |
| 14***36 | Edge | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
279-5372 Bucket As-General Purpose
| 14***36 | Edge | 1 |
| 27***72 | Bucket As-General Purpose | 1 |
292-9271 Bucket As-General Purpose
| 13***86 | Edge Group-Cutting | 1 |
| 18***26 | Bucket As-Dirt | 1 |
| 29***71 | Bucket As-General Purpose, Cap | 1 |
279-5376 Bucket As-General Purpose
| 13***84 | Edge Group-Cutting | 1 |
| 16***56 | Bucket As-Dirt | 1 |
| 27***76 | Bucket As-General Purpose | 1 |
217-6226 Bucket As-Grapple
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
156-0889 Bucket As-Grapple
| 15***89 | Bucket As-Grapple | 1 |
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
169-8942 Bucket As-Grapple
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***42 | Bucket As-Grapple; -Industrial | 1 |
217-6227 Bucket As-Grapple
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 21***27 | Bucket As-Grapple | 1 |
169-8943 Bucket As-Grapple
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***43 | Bucket As-Grapple | 1 |
169-8941 Bucket As-Grapple
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***41 | Bucket As-Grapple; -Industrial | 1 |
156-0887 Bucket As-Grapple
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***87 | Bucket As-Grapple; -Industrial | 1 |
| 16***89 | Tack-Fastener | 4 |
156-0888 Bucket As-Grapple
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 9 |
| 15***88 | Bucket As-Grapple | 1 |
279-5421 Bucket As-Light Material
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 27***21 | Bucket As-Light Material | 1 |
279-5422 Bucket As-Light Material
| 14***32 | Clam As-Multipurpose Bucket | 1 |
| 15***12 | Pin | 2 |
| 15***45 | Blade Group-Multipurpose Bucket | 1 |
279-5423 Bucket As-Light Material
| 15***12 | Pin | 2 |
| 15***70 | Clam As-Multipurpose Bucket | 1 |
| 15***47 | Blade Group-Multipurpose Bucket | 1 |
292-9223 Bucket As-Light Material
| 15***12 | Pin | 2 |
| 19***08 | Clam As-Multipurpose Bucket | 1 |
| 27***05 | Blade Group-Multipurpose Bucket | 1 |
279-5428 Bucket As-Light Material
| 15***12 | Pin | 2 |
| 15***53 | Clam As-Multipurpose Bucket | 1 |
| 27***88 | Blade Group-Multipurpose Bucket | 1 |
292-9224 Bucket As-Light Material
| 15***12 | Pin | 2 |
| 29***24 | Bucket As-Light Material, Tyre/Tire, Tyre/Tire; Tire | 1 |
| 29***42 | Blade Group-Multipurpose Bucket | 1 |
279-5424 Bucket As-Light Material
| 14***32 | Clam As-Multipurpose Bucket | 1 |
| 15***12 | Pin | 2 |
| 27***84 | Blade Group-Multipurpose Bucket | 1 |
279-5429 Bucket As-Light Material
| 15***12 | Pin | 2 |
| 15***70 | Clam As-Multipurpose Bucket | 1 |
| 27***96 | Blade Group-Multipurpose Bucket | 1 |
165-8835 Bucket As-Utility
| 15***12 | Pin | 2 |
| 15***70 | Clam As-Multipurpose Bucket | 1 |
| 16***35 | Bucket As-Utility | 1 |
165-8746 Bucket As-Utility
| 14***32 | Clam As-Multipurpose Bucket | 1 |
| 15***12 | Pin | 2 |
| 16***46 | Bucket As-Utility | 1 |
285-6097 Bucket As-Utility
| 15***12 | Pin | 2 |
| 15***38 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
| 28***97 | Bucket As-Utility | 1 |
165-8837 Bucket As-Utility
| 15***12 | Pin | 2 |
| 16***37 | Bucket As-Utility | 1 |
| 19***08 | Clam As-Multipurpose Bucket | 1 |
285-6098 Bucket As-Utility
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 28***97 | Bucket As-Utility | 1 |
165-8832 Bucket As-Utility
| 15***12 | Pin | 2 |
| 15***53 | Clam As-Multipurpose Bucket | 1 |
| 16***32 | Bucket As-Utility | 1 |
285-6103 Bucket As-Utility
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 28***98 | Bucket As-Utility, Fuel Injection Pump; - Assembly | 1 |
152-0232 Bucket Gp-Dirt
| 15***32 | Bucket Group-Dirt | 1 |
| 19***43 | Fork Group-Pallet | 2 |
| 26***81 | Carriage Group-Fork | 1 |
152-0231 Bucket Gp-Dirt
| 15***31 | Bucket Group-Dirt | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
268-4084 Bucket Gp-Dirt
| 19***45 | Fork Group-Pallet | 2 |
| 26***81 | Carriage Group-Fork | 1 |
| 26***84 | Bucket Group-Dirt | 1 |
188-2719 Bucket Gp-Dirt
| 18***19 | Bucket Group-Dirt | 1 |
| 19***42 | Fork Group-Pallet | 2 |
| 26***81 | Carriage Group-Fork | 1 |
296-8191 Bucket Gp-General Purpose
| 29***91 | Bucket Group-General Purpose | 1 |
| 35***71 | Carriage Group-Fork | 6 |
156-0884 Bucket Gp-Grapple
| 15***84 | Bucket Group-Grapple; -Industrial | 1 |
| 19***43 | Fork Group-Pallet | 2 |
| 35***71 | Carriage Group-Fork | 1 |
156-0885 Bucket Gp-Grapple
| 15***85 | Bucket Group-Grapple; -Industrial | 1 |
| 19***42 | Fork Group-Pallet | 2 |
| 35***71 | Carriage Group-Fork | 1 |
286-9278 Bucket Gp-Grapple
| 14***05 | Bearing-Sleeve | 4 |
| 14***35 | Edge | 1 |
| 15***38 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
156-0886 Bucket Gp-Grapple
| 15***86 | Bucket Group-Grapple; -Industrial | 1 |
| 19***45 | Fork Group-Pallet | 2 |
| 35***71 | Carriage Group-Fork | 1 |
279-5359 Bucket Gp-Grapple -Industrial
| 26***81 | Carriage Group-Fork | 6 |
| 27***59 | Bucket Group-Grapple; -Industrial | 1 |
286-9244 Bucket Gp-Grapple
| 15***35 | Plate-Instruction; (Load Capacity) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 25***95 | Step As | 1 |
217-6228 Bucket Gp-Grapple
| 15***35 | Plate-Instruction; (Load Capacity) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 21***28 | Bucket Group-Grapple | 1 |
279-5383 Bucket Gp-Multipurpose
| 14***05 | Bearing-Sleeve | 4 |
| 15***38 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
| 16***30 | Plate-Identification; (Cat) | 2 |
154-5005 Bucket Gp-Multipurpose
| 14***05 | Bearing-Sleeve | 4 |
| 14***36 | Edge | 1 |
| 15***05 | Bucket Group-Multipurpose | 1 |
325-7067 Bucket Gp-Multipurpose
| 19***40 | Cylinder Group-Hydraulic; -Coupler | 1 |
| 19***42 | Pin | 1 |
| 21***57 | Link Group-Coupler | 1 |
325-7077 Bucket Gp-Multipurpose
| 19***40 | Cylinder Group-Hydraulic; -Coupler | 1 |
| 19***42 | Pin | 1 |
| 21***57 | Link Group-Coupler | 1 |
293-0141 Bucket Gp-Multipurpose
| 25***25 | Lines Group-Coupler | 1 |
| 25***01 | Coupler Group-Quick | 1 |
| 25***90 | Wiring Group-Quick Coupler | 1 |
325-7037 Bucket Gp-Multipurpose
| 13***79 | Washer; (11x32x3-mm Thk) | 2 |
| 13***51 | Spacer; (11x19x6-mm Thk) | 2 |
| 15***97 | Spring | 2 |
279-5397 Bucket Gp-Multipurpose
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
279-5404 Bucket Gp-Multipurpose
| 25***00 | Coupler Group-Quick | 1 |
| 27***04 | Bucket Group-Multipurpose | 1 |
| 28***90 | Fitting Group-Hydraulic; -Manual | 1 |
154-5009 Bucket Gp-Multipurpose
| 14***05 | Bearing-Sleeve | 4 |
| 14***37 | Edge | 1 |
| 15***09 | Bucket Group-Multipurpose | 1 |
325-7057 Bucket Gp-Multipurpose
| 16***28 | Plate | 1 |
| 32***57 | Bucket Group-Multipurpose | 1 |
| 5C***53 | Bolt (M6x1.00x16mm); (M6x1x16mm Thk) | 5 |
279-5389 Bucket Gp-Multipurpose
| 14***05 | Bearing-Sleeve | 4 |
| 16***30 | Plate-Identification; (Cat) | 2 |
| 22***32 | Edge | 1 |
325-7047 Bucket Gp-Multipurpose
| 20***85 | Pin | 2 |
| 21***62 | Cylinder & Link Group-Coupler; -Lh | 1 |
| 21***63 | Cylinder & Link Group-Coupler; -Rh | 1 |
285-6102 Bucket Gp-Utility
| 13***93 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 6 |
| 28***02 | Bucket Group-Utility | 1 |
285-6096 Bucket Gp-Utility
| 14***14 | Edge-Cutting | 1 |
| 28***96 | Bucket Group-Utility | 1 |
| 3F***08 | Bolt-Plow; (5/8-11x2.25-In) | 10 |
285-6099 Bucket Gp-Utility
| 14***88 | Edge-Cutting | 1 |
| 28***99 | Bucket Group-Utility | 1 |
| 3F***08 | Bolt-Plow; (5/8-11x2.25-In) | 13 |
293-9429 Carriage & Fork Ar
| 13***96 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 11 |
| 29***29 | Carriage & Fork Ar | 1 |
353-1694 Carriage & Fork Ar
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 7 |
| 19***24 | Edge-Cutting | 1 |
| 35***94 | Carriage & Fork Ar | 1 |
353-1697 Carriage & Fork Ar
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 13 |
| 29***02 | Edge-Cutting | 1 |
| 35***97 | Carriage & Fork Ar | 1 |
353-1693 Carriage & Fork Ar
| 13***97 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 11 |
| 35***93 | Carriage & Fork Ar | 1 |
353-1696 Carriage & Fork Ar
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 11 |
| 19***24 | Edge-Cutting | 1 |
| 35***96 | Carriage & Fork Ar | 1 |
293-9427 Carriage & Fork Ar
| 13***94 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 8 |
| 29***27 | Carriage & Fork Ar | 1 |
293-9428 Carriage & Fork Ar
| 13***95 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 8 |
| 29***28 | Carriage & Fork Ar | 1 |
261-6681 Carriage Gp-Fork
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***14 | Fork Group-Grapple; -Industrial | 9 |
| 26***81 | Carriage Group-Fork | 1 |
351-9371 Carriage Gp-Fork
| 28***05 | Fork Group-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
| 35***71 | Carriage Group-Fork | 1 |
293-9426 Carriage Gp-Fork
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***14 | Fork Group-Grapple; -Industrial | 2 |
| 27***75 | Cylinder Group-Grapple; -Industrial | 2 |
293-0148 Clam As-Multipurpose Bucket
| 22***29 | Positioner Group-Fork | 1 |
| 29***48 | Clam As-Multipurpose Bucket | 1 |
154-5070 Clam As-Multipurpose Bucket
| 15***70 | Clam As-Multipurpose Bucket | 1 |
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
149-4232 Clam As-Multipurpose Bucket
| 14***32 | Clam As-Multipurpose Bucket | 1 |
| 28***10 | Fork Group-Grapple | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
154-5053 Clam As-Multipurpose Bucket
| 15***53 | Clam As-Multipurpose Bucket | 1 |
| 16***54 | Tine | 1 |
| 3E***70 | Pin; (Spring) | 1 |
199-8308 Clam As-Multipurpose Bucket
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 9 |
| 19***08 | Clam As-Multipurpose Bucket | 1 |
296-0582 Conversion Gp-Work Tool -Kit, High Flow
| 22***29 | Positioner Group-Fork | 1 |
| 29***82 | Conversion Group-Work Tool; -Kit, High Flow | 1 |
258-3691 Coupler Ar-Quick
| 19***43 | Fork Group-Pallet | 12 |
| 22***29 | Positioner Group-Fork | 1 |
| 25***91 | Coupler Ar-Quick | 1 |
258-2790 Coupler Ar-Quick
| 22***29 | Positioner Group-Fork | 1 |
| 25***90 | Coupler Ar-Quick | 1 |
258-2500 Coupler Gp-Quick
| 19***42 | Fork Group-Pallet | 12 |
| 22***29 | Positioner Group-Fork | 1 |
| 25***00 | Coupler Group-Quick | 1 |
258-2501 Coupler Gp-Quick
| 19***45 | Fork Group-Pallet | 12 |
| 22***29 | Positioner Group-Fork | 1 |
| 25***01 | Coupler Group-Quick | 1 |
162-5236 Cover Gp-Lines
| 16***36 | Cover Group-Lines | 1 |
| 16***41 | Tine | 1 |
| 9R***59 | Clip | 1 |
215-3962 Cylinder & Link Gp-Coupler -Lh
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 7 |
| 16***38 | Fork Group-Utility | 1 |
215-3963 Cylinder & Link Gp-Coupler -Rh
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 9 |
| 16***39 | Fork Group-Utility | 1 |
222-7546 Edge Gp-Bit & Cutting
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***45 | Fork As; (Utility) | 1 |
222-7545 Edge Gp-Bit & Cutting
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***44 | Fork As; (Utility) | 1 |
149-5741 Edge Gp-Cutting
| 14***41 | Edge Group-Cutting | 1 |
| 15***11 | Pin | 4 |
| 15***35 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
135-9384 Edge Gp-Cutting
| 13***84 | Edge Group-Cutting | 1 |
| 17***14 | Pin As | 1 |
| 17***55 | Shim; (1-mm Thk) | 1 |
195-7124 Edge Gp-Cutting
| 19***37 | Plate | 1 |
| 19***45 | Spring | 1 |
| 19***54 | Pin-Spring | 2 |
135-9385 Edge Gp-Cutting
| 13***85 | Edge Group-Cutting | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
135-9383 Edge Gp-Cutting
| 13***83 | Edge Group-Cutting | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 7 |
135-9387 Edge Gp-Cutting
| 13***87 | Edge Group-Cutting | 1 |
| 16***31 | Mounting Group-Cylinder; -Utility | 1 |
| 16***40 | Grapple Group-Utility | 1 |
135-9386 Edge Gp-Cutting
| 13***86 | Edge Group-Cutting | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
296-7680 Edge Gp-Cutting
| 19***37 | Plate | 1 |
| 19***45 | Spring | 1 |
| 19***54 | Pin-Spring | 2 |
279-5350 Fork Ar-Grapple -Industrial
| 03***57 | Washer; (13x26x6-mm Thk) | 2 |
| 17***53 | Plate | 2 |
| 18***97 | Plate Group-Roading; -Lh | 1 |
285-6115 Fork Ar-Grapple -Utility
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 06***51 | Clamp | 4 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 4 |
279-5360 Fork Ar-Grapple -Industrial
| 03***57 | Washer; (13x26x6-mm Thk) | 4 |
| 17***14 | Film-Stripe; (Reflective, Red, White) | 1 |
| 17***15 | Film; (Reflective)(Warning) | 1 |
285-6114 Fork Ar-Grapple -Utility
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 06***51 | Clamp | 4 |
| 10***59 | Spacer; (9x20x39.2-mm Thk) | 1 |
279-5351 Fork Gp-Grapple -Industrial
| 17***47 | Pin | 1 |
| 27***51 | Fork Group-Grapple; -Industrial | 1 |
| 9R***01 | Pin-Cotter | 1 |
285-6110 Fork Gp-Grapple
| 16***60 | Pin-Spring | 1 |
| 19***42 | Pin | 1 |
| 25***36 | Handle & Pin Group-Coupler; -Rh | 1 |
164-9614 Fork Gp-Grapple
| 16***14 | Fork Group-Grapple; -Industrial | 1 |
| 19***45 | Spring | 1 |
| 30***68 | Pin-Spring | 1 |
195-8545 Fork Gp-Pallet
| 17***14 | Film-Stripe; (Reflective, Red, White) | 1 |
| 17***15 | Film; (Reflective)(Warning) | 1 |
| 17***51 | Plate As; (Rh) | 1 |
243-0001 Fork Gp-Pallet -Kit
| 17***41 | Spring | 4 |
| 17***73 | Plate As | 1 |
| 24***01 | Fork Group-Pallet; -Kit | 1 |
243-0003 Fork Gp-Pallet -Kit
| 24***03 | Fork Group-Pallet; -Kit | 1 |
| 2S***08 | Washer-Retaining; (0.531x3.25x0.438-In Thk) | 2 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 1 |
195-6942 Fork Gp-Pallet
| 16***60 | Pin-Spring | 1 |
| 19***42 | Pin | 1 |
| 19***42 | Fork Group-Pallet | 1 |
243-0002 Fork Gp-Pallet -Kit
| 18***86 | Step As | 1 |
| 24***02 | Fork Group-Pallet; -Kit | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
195-6943 Fork Gp-Pallet
| 17***14 | Film-Stripe; (Reflective, Red, White) | 1 |
| 17***15 | Film; (Reflective)(Warning) | 1 |
| 17***50 | Plate As; (Lh) | 1 |
165-8732 Fork Gp-Utility
| 11***14 | Screen; (Water Tank) | 1 |
| 11***15 | Gasket | 1 |
| 16***32 | Fork Group-Utility | 1 |
165-8736 Fork Gp-Utility
| 16***36 | Fork Group-Utility | 1 |
| 19***06 | Cap As; (Water Tank) | 1 |
| 19***07 | Fitting-Drain | 1 |
165-8737 Fork Gp-Utility
| 16***37 | Fork Group-Utility | 1 |
| 25***27 | Screw-Truss Head; (No 12x17.46-mm) | 4 |
| 25***98 | Holder-Cup | 1 |
285-6105 Fork Gp-Utility
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 20***45 | Strap-Cable | 2 |
| 25***92 | Seal | 1 |
165-8739 Fork Gp-Utility
| 16***39 | Fork Group-Utility | 1 |
165-8738 Fork Gp-Utility
| 16***38 | Fork Group-Utility | 1 |
230-5670 Frame Gp-Blade
| 23***70 | Frame Group-Blade | 1 |
| 25***68 | Compressor & Mtg Group-Refrig | 1 |
| 25***46 | Wiring Group-Heater | 1 |
279-5358 Frame Gp-Fork -Industrial
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***31 | Switch-Temperature; (Air Conditioner) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
279-5352 Frame Gp-Fork -Industrial
| 10***74 | Seal-Connector | 3 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
285-6116 Grapple & Cylinder Gp-Utility
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 22***57 | Switch As-Limit; (Load Control) | 1 |
165-8740 Grapple Gp-Utility
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 16***40 | Grapple Group-Utility | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
258-2536 Handle & Pin Gp-Coupler -Rh
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
| 25***36 | Handle & Pin Group-Coupler; -Rh | 1 |
258-2538 Handle & Pin Gp-Coupler -Lh
| 25***38 | Handle & Pin Group-Coupler; -Lh | 1 |
| 25***66 | Installation Group-Radio | 1 |
| 25***90 | Window Group-Cab; -Side | 1 |
177-9152 Kit-Roading Plate & Mounting -Bucket
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 25***66 | Installation Group-Radio | 1 |
| 25***90 | Window Group-Cab; -Side | 1 |
319-9480 Kit-Roading Plate & Mounting -Bucket
| 25***10 | Window Group-Cab | 1 |
| 25***20 | Liner Group-Cab | 1 |
| 25***00 | Wiring Group-Cab | 1 |
346-1833 Kit-Water Tank & Mounting
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***93 | Lockwasher | 1 |
| 22***96 | Seal-O-Ring | 2 |
258-3645 Kit-Water Tank & Mounting
| 25***45 | Kit-Water Tank & Mounting | 1 |
| 8T***42 | Rod End-Yoke | 1 |
| 8T***44 | Pin As-Spring | 1 |
215-3957 Link Gp-Coupler
| 11***15 | Relay As; (12-Volt)(Junction Box) | 1 |
| 21***57 | Link Group-Coupler | 1 |
| 25***84 | Bracket As; (Upper Lh) | 1 |
258-2537 Lock Gp-Quick Coupler -Lh
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 2 |
| 10***33 | Kit; (Receptacle) (Includes Receptacle As) | 1 |
| 10***95 | Terminal-Blade; (14-Ga To 18-Ga) | 2 |
258-2535 Lock Gp-Quick Coupler -Rh
| 10***33 | Kit; (Receptacle) (Includes Receptacle As) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***16 | Terminal | 1 |
175-4238 Lock Gp-Quick Coupler -Mechanical
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 26***29 | Shroud As | 1 |
| 28***41 | Coil As | 1 |
184-6098 Plate Gp-Roading -Rh
| 18***98 | Plate Group-Roading; -Rh | 1 |
| 26***66 | Control Group-Joystick; -Lh | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
184-6097 Plate Gp-Roading -Lh
| 18***97 | Plate Group-Roading; -Lh | 1 |
| 25***71 | Switch As; (Temperature Control) | 1 |
| 25***72 | Switch As; (Blower Fan Speed) | 1 |
177-1983 Spring Gp-Blade
| 17***83 | Spring Group-Blade | 1 |
| 26***65 | Control Group-Joystick; -Lh, High Flow | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
188-7733 Step Gp-Material Handling Arm
| 18***33 | Step Group-Material Handling Arm | 1 |
| 26***64 | Control Group-Joystick; -Rh | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
173-7407 Stop Gp-Bucket -Utility
| 17***07 | Stop Group-Bucket; -Utility | 1 |
| 26***62 | Control Group-Joystick; -Rh | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
116-2001 Strainer Gp-Water
| 11***01 | Strainer Group-Water | 1 |
| 26***63 | Control Group-Joystick; -Rh, High Flow | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
166-2551 Tank Gp-Water
| 16***51 | Tank Group-Water | 1 |
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 9 |
141-4999 Tooth Gp-Uni
| 14***99 | Tooth Group-Uni | 1 |
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
289C serial number reference
PIN plate is riveted to the left side of the machine, on the front lift-arm support ahead of the cab. The same serial is cross-stamped into the frame near the plate as a backup check. Read the first three letters as the plant/model build-series prefix and the following five digits as the unit's build sequence within that series, for example JMP00001.
| Prefix | Identifies | Notes |
|---|---|---|
| JMP | 289C compact track loader (rubber-tracked undercarriage) - only production serial series for this model number | Open-ended range, JMP00001-and-up, with no documented internal serial break. Powered by the Cat 3044C diesel, turbocharged, direct-injection, four-cylinder, also marketed under the C3.4 DIT designation. Field-documented unit serials (JMP00421, JMP00772, JMP01989, JMP02269, JMP02782) all fall inside this single range, consistent with one continuous build series. |
Frequently asked questions
What engine does the Caterpillar 289C use?
The 289C runs a Cat C3.4 DIT engine, from the 3044C engine family, a 3.3 L, four-cylinder, turbocharged and aftercooled diesel rated at roughly 84 hp (63 kW) gross at 2500 rpm. The 289C2 successor kept the same C3.4 DIT engine, retuned for tighter emissions limits.
What is the operating weight of the Caterpillar 289C?
Operating weight is about 4,700 kg (10,365 lb), varying slightly by boom configuration, undercarriage and attached work tool. Rated operating capacity is quoted differently across sources depending on whether it's figured at 35% or 50% of tipping load, roughly 1,220 kg (2,695 lb) at the standard 35% rating, up to about 1,750 kg (3,850 lb) at 50%.
What replaced the Caterpillar 289C?
Cat first updated it to the 289C2, an emissions-retuned version of the same C3.4 DIT engine with a shortened track-on-ground undercarriage. The 289C2 was then replaced by the 289D, which switched to a different C3.3B engine platform.
What 289C owners discuss
What's the most common hydraulic complaint reported on the 289C, and what causes it?
Owners and techs most often report the main hydraulics locking out or losing arm/lift function intermittently, sometimes with an air-filter-restriction warning showing even though the filter is clean. Reported causes include a control-valve spool that sticks or gets contaminated, a main-pump servo/swashplate that won't destroke, and, in cases with a full loss of drive plus a dead cooling fan, a sheared coupling between the engine and hydraulic pump. Main system pressure that reads strong cold (around 193 bar / 2800 psi) but sags below 138 bar (2000 psi) after 15-20 minutes of running points to a tired pump rather than a filter problem. Have your dealer verify pump and valve condition before replacing major components.
Some 289C owners describe travel speed dropping on its own while driving. What's behind that?
This is a recurring complaint: the machine loses ground speed at a steady RPM, and cycling the travel control back to neutral restores speed until it slips again after a few minutes. The most consistent lead points to the throttle position sensor and its calibration, sometimes tied to a stretched throttle cable that keeps the sensor from resetting cleanly; a failing slowdown switch has also thrown related codes in some cases. There's no single confirmed fix on record — pulling stored fault codes and running a hydraulic oil sample are the usual starting points before replacing parts.
What undercarriage wear patterns show up most on the 289C's track system?
Because this is a rubber-tracked machine, wear concentrates in idlers, rollers, and sprockets rather than tires. Front idler bearing failure is a widely reported wear item, with some owners replacing more than one idler in a short span. The rear tension idler arm is another known weak point: a failed idler roller there can crack the arm, and if the tensioner runs low on grease and the rod extends too far, it can punch into the front frame's alignment pocket. Loose or worn bolts where the torsion bars mount under the cab also turn up on inspection. Keeping track tension in spec on a routine schedule slows all of this wear.
What clunking or looseness in the undercarriage should worry me, and what shouldn't?
Some clunking traces to worn rubber suspension isolators under the frame, which is a normal wear item and not structural. What matters is telling that apart from excessive play at the front idler, which points to the bearing wear noted above and is a more serious repair. Checking for movement directly at the idler versus a duller thud from the frame mounts is how this gets sorted out before assuming the worst.
What engine does the 289C run, and does it change across the C and C2 update?
Both the 289C and the later 289C Series 2 (289C2) use the Cat C3.4 DIT diesel, a different engine from the 289D, which moved to the C3.3B. The C-to-C2 change was a tuning update, not a new engine: the fuel pump was turned down to meet a tightened emissions step, which dropped rated output from roughly 63 kW (84 hp) on the base C to about 55 kW (74 hp) on the C2, and the track-on-ground length was trimmed by around 127 mm (5 in) to keep turning performance acceptable at the lower power level. Head gasket failure is also flagged as a known issue on 289C-family engines — an overfull coolant reservoir paired with an empty sight-glass bubble at the radiator cap is the classic warning sign, and by the time it shows up the cylinder head is often already damaged beyond repair. Have your dealer verify head and cooling-system condition on any machine with a coolant history.
What electrical or sensor faults come up most in 289C troubleshooting?
Joystick position-sensor faults are the recurring one. A fault on the left or right joystick's fore-aft position sensor is a common cause of the parking brake refusing to release, since the ECM won't allow the brake to disengage unless every joystick sensor reads a clean neutral — one bad sensor, or a failing joystick itself, locks the brake on. On the drive side, speed-sensor faults on the left and right drive motors more often trace back to chafed wiring harness insulation near moving parts than to the sensor itself; checking harness continuity before condemning a sensor or the ECM is the recommended first step. Because these faults gate a safety function, have your dealer verify sensor and harness readings against spec rather than swapping parts on a guess.
What should I check when looking at a used 289C?
Start at the undercarriage: check track tension, look for play at the front idlers, and inspect the rear tension idler arm and torsion bar mounting bolts for cracks or looseness, since these are the machine's known weak points. Cold-start the engine and watch the coolant reservoir and sight glass for head gasket warning signs, and note whether it's hard to start or dies shortly after starting, which often traces to fuel filters or injectors. Cycle lift and tilt through a full range and watch for hesitation or lockout; if possible, compare main hydraulic pressure cold versus after a 15-20 minute warm-up, since a big drop signals a worn pump. Run the joysticks through neutral and confirm the parking brake releases cleanly, since a flaky joystick sensor is a known cause of both brake and hydraulic lockout complaints. Pull active and stored fault codes with a diagnostic scan tool before finalizing a deal, and treat the hour meter as a starting point for negotiation rather than a guarantee of history. Have your dealer verify pump, sensor, and undercarriage condition before you close the sale.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 289C part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.