Caterpillarskid steer loadermulti terrain loader
Caterpillar 287
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 287 is a compact, rubber-tracked multi-terrain loader — Cat's skid-steer platform married to a torsion-axle track undercarriage rather than a wheeled chassis. It sits at the top of the original 247/257/267/277/287 MTL family. Power comes from a Cat 3034T, a 4-cylinder turbocharged diesel rated at roughly 80 hp (60 kW) gross and 74 hp (55 kW) net; this is a distinct, smaller engine from the 287B's Cat 3044C DIT and the 287C's Cat C3.4 DIT. Operating weight runs roughly 4,470-4,660 kg (9,860-10,270 lbs) depending on configuration and source. The base 287 (no letter suffix) was built through the early-to-mid 2000s, roughly 2000 through 2004, before Caterpillar replaced it with the 287B. It was offered with open ROPS or an enclosed cab, and standard-flow auxiliary hydraulics for buckets, forks, augers and brooms; a factory high-flow hydraulic option was not part of this base generation.
Caterpillar built the 287 on undercarriage technology from its rubber-track partnership with ASV, pairing that torsion-axle track chassis with the upper structure and drive layout shared with Cat's contemporary vertical-lift skid-steer line. The series then moved through clear steps: the 287B (mid-2000s) added engine power and, on that generation, an optional high-flow hydraulic circuit; the 287C moved to a larger C3.4 DIT engine; the 287D carried the platform further with updated cab and hydraulic packages. Because the base 287 is the oldest and least powerful machine in the lineage, it is now the entry point into Cat's MTL platform on the used market — cheap to buy but carrying the most undercarriage and hydrostatic-drive wear for the money, since rubber tracks, bogie wheels and drive motors are the expensive rebuild items on any MTL of this age. It remains relevant mainly as a low-cost compact track loader for buyers who don't need late-model electronics, and as a source of interchange parts and attachments for owners running the wider 247-287 family.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 287 specifications
Engine
| Series/generation | Base 287 Multi Terrain Loader nameplate — first-generation model, predecessor to the later 287B/287C/287D series. Specs below apply to this base 287 only. |
| Engine model | Cat 3034T, in-line 4-cylinder, turbocharged diesel |
| Gross power | 60 kW (80 hp), SAE J1995 |
| Net power | 55 kW (74 hp), SAE J1349 |
| Bore x stroke | 97 mm x 100 mm (3.82 in x 3.94 in) |
| Emissions | Built to meet U.S. EPA and EU non-road emission standards in force for this engine family at time of production; a specific numbered tier is not stated in the dealer literature reviewed. |
Weights
| Operating weight | 4,471 kg (9,860 lb) |
| Ground pressure | 26 kPa (3.8 psi) |
| Shipping weight | Not separately published for the base 287; varies with attachment and options — confirm with a dealer for transport planning. |
Dimensions
| Track width | 457 mm (18 in) |
| Track length on ground | 1,842 mm (72.5 in) |
| Ground contact area | 1.68 m² (2,610 in²) |
| Overall transport dimensions | Overall length, width, height, wheelbase and ground clearance are not separately documented for the base 287 nameplate apart from the later 287B/287C/287D series — confirm exact transport dimensions with a dealer before hauling. |
Performance
| Travel speed, forward | 11 km/h (7 mph) |
| Travel speed, reverse | 11 km/h (7 mph) |
| Tipping load | 3,188 kg (7,030 lb) |
| Rated operating capacity (50% of tipping load) | 1,587 kg (3,500 lb) |
| Rated operating capacity (35% of tipping load) | 1,111 kg (2,450 lb) |
| Breakout force, lift cylinder | 2,214 kgf (4,882 lbf) |
| Breakout force, tilt cylinder | 2,173 kgf (4,790 lbf) |
Service capacities (summary)
| Fuel tank | 110 L (29 gal US) |
| Hydraulic system, total | 51 L (13.5 gal US) |
| Hydraulic tank | 35 L (9.2 gal US) |
| Engine oil (crankcase) | 6.8 L (1.8 gal US) |
| Cooling system | 9.8 L (2.6 gal US) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
287 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase with filter (Cat 3034 turbocharged diesel) | 6-9 L new/used engine, ADD to FULL mark (1.6-2.4 US gal); commonly cited operating fill approx. 6.8 L (1.8 US gal) | Cat DEO, Cat DEO SYN, Cat DEO-ULS or Cat Arctic DEO SYN (API CG-4/CF equivalent). Grade by ambient temperature: SAE 0W-20 down to -40C(-40F) up to 10C(50F); 0W-30 -40 to 30C(-40 to 86F); 0W-40 -40 to 40C(-40 to 104F); 5W-30 -30 to 30C(-22 to 86F); 5W-40 -30 to 50C(-22 to 122F); 10W-30 -18 to 40C(0 to 104F); 10W-40 -18 to 50C(0 to 122F); 15W-40 -9.5 to 50C(15 to 122F) |
| Cooling system | 10 L (2.6 US gal) | Cat ELC (Extended Life Coolant), premixed/concentrate per climate. Service life 6000 hours or 4 years with ELC Extender added at midpoint |
| Fuel tank | 110 L (29.0 US gal) - 287 specific; other loaders in same OMM family differ: 247 62 L, 257 90 L, 267/277 80 L | Ultra low sulfur diesel per Cat fuel spec, grade selected by ambient temperature per fuel section of the manual |
| Hydraulic system, total (includes tank, lines, cylinders, hydrostatic drive circuit) | approx. 51 L (13.5 US gal) | Cat HYDO / Cat HYDO Advanced, or Cat DEO, Cat MTO, Cat TDTO, Cat TDTO-TMS, Cat DEO SYN, Cat Arctic TDTO, Cat ECF-1 (shared hydrostatic/hydraulic circuit). Biodegradable option Cat BIO HYDO (HEES), rated -40 to 43C (-40 to 110F). Grade selection follows same viscosity-by-temperature bands as engine oil |
| Hydraulic tank (reservoir only) | approx. 35 L (9.2-9.3 US gal) | Same fluid options as hydraulic system, total (Cat HYDO family or Cat BIO HYDO) |
| Bogie and idler wheel tubes (undercarriage lubrication, each station - track-type Multi Terrain Loader) | 0.26 L (0.07 US gal) per tube | Cat GO (Gear Oil) or Cat Synthetic GO, API GL-5, SAE 80W-90, rated -20 to 40C (-4 to 104F) |
| Grease, external lubrication points (spec only) | n/a - apply per lubrication schedule, no reservoir capacity | Cat Advanced 3Moly grease, NLGI Grade 2, rated -20 to 40C (-4 to 104F) |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 287 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 3,000 h |
|
Servicing the 287 beyond the schedule
Predictive Maintenance & Fluid Analysis
The 3034T's turbocharger and injection pump show wear in oil analysis long before it shows up as noise or power loss, so treat the 250-hour engine oil sample and 500-hour hydraulic oil sample as non-negotiable, not optional. Watch fuel filter differential pressure at every fill, since the 287's single-stage primary/secondary fuel filtration is unforgiving of water-cut diesel. If you have a flow meter, log hydrostatic drive motor case-drain flow periodically — rising case-drain flow flags motor wear well before a side pulls or locks up in the field.
Corrective & Common Repairs
Uneven power or lock-up on one side of the hydrostatic drive is the most reported corrective issue on the 287, usually internal motor wear or a speed-sensor harness chafed through against a drive hose — reroute and re-clamp that harness at every track service. Lift-arm cylinder seal leaks and quick-coupler pin wear are the next most common jobs. If a track pops or the drive cage seems to slip over the knobs, reset track tension and check bogie wheel alignment before condemning the track itself.
Overhaul & Rebuild Points
Rebuild cost on a 287 is driven by the undercarriage and hydrostatic drive, not the 3034T engine, which typically outlasts the tracks. Plan on replacing bogie wheels, idlers and sprockets as a set once the rubber track shows core separation or worn knobs, and inspect the torsion-axle suspension bushings at the same time. Hydrostatic drive motor and pump rebuilds are the other major expense on high-hour units; staying current on the 1,000-hour hydraulic oil and filter change slows that wear but does not remove the eventual cost.
Seasonal & Environment Servicing
Cold starts load the 3034T's glow plug and injection system, so drain the primary fuel filter/water separator daily in winter and keep the tank topped up to limit condensation. Rubber tracks stiffen below freezing — clear packed snow and ice from the bogie wheels before each start to avoid de-tracking. In hot, dusty or brush-clearing duty, clean the engine air filter and radiator core ahead of the standard interval and watch hydraulic oil temperature, since the 287's cooling package is sized for general construction work, not sustained heavy debris loads.
287 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 110-6326 | Filter Element As-Air | Air intake service | Check fitment → |
| 110-6331 | Filter Element As-Air | Air intake service | Check fitment → |
| 142-9291 | Filter | Air intake service | Check fitment → |
| 1G-8878 | Filter As-Oil | Hydraulic service | Check fitment → |
| 170-7675 | Valve | Scheduled service item | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
287 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 2474-03 / 2475-03 | Left/Right joystick forward-reverse position sensor signal voltage above normal (electro-hydraulic XPS joystick controls, 287C and later). | Internal sensor fault, chafed harness, or a shared power/ground fault feeding both position sensors in the same joystick. | Inspect the joystick connector and harness for damage or corrosion; swap left and right joysticks to see if the fault follows the joystick, then check sensor supply voltage and ground. |
| 2476-03 / 2477-03 | Left/Right joystick left-right position sensor signal voltage above normal (electro-hydraulic XPS joystick controls, 287C and later). | Same sensor or wiring/ground fault as the forward-reverse sensor housed in the same joystick body. | Check joystick harness pins and connector condition, verify sensor reference voltage and ground, and replace the joystick assembly if the fault stays isolated to one side. |
| 2685-08 / 2686-08 | LH drive motor speed sensor #1/#2 - abnormal frequency, pulse width, or period (electro-hydraulic control system, 287C and later). | Faulty PWM signal from the paired sensors, damaged sensor wiring, or a shared power/ground fault since both sensors sit in one body. | Inspect the LH drive motor sensor harness and connector, check the shared power and ground circuits, and drive the machine so the control module can confirm the fault before condemning the sensor. |
| 2687-08 / 2688-08 | RH drive motor speed sensor #1/#2 - abnormal frequency, pulse width, or period (electro-hydraulic control system, 287C and later). | Same failure mode as the LH pair, mirrored on the right side drive motor sensor body. | Inspect the RH drive motor sensor harness, connector, and shared power/ground, then re-check after a drive cycle. |
| 1705-05 | Right drive pump forward control solenoid current below normal (open circuit); machine limits forward speed to half or stops reverse travel (electro-hydraulic control system, 287C and later). | Open energizing or return circuit to the solenoid, or a failed solenoid coil. | Check wiring continuity to the solenoid, clean and tighten terminals, and test solenoid coil resistance before replacing the solenoid. |
| E360 | Low engine oil pressure warning (digital instrument cluster, 287C and later; earlier machines including this base 287 flag the same condition with an analog gauge or warning light). | Low oil level, a failing oil pressure switch, or a genuine low-pressure condition. | Shut down safely, check oil level and condition, then test the oil pressure switch before returning the machine to service. |
| E361 | High engine coolant temperature warning, trips above roughly 110 C (230 F) (digital instrument cluster, 287C and later; the base 287 flags the same condition with an analog gauge). | Low coolant, a blocked radiator or screen, a failed fan drive, or a thermostat stuck closed. | Stop and let the engine cool, check coolant level and radiator for debris, and inspect the fan drive and thermostat. |
| E875 | Low system (battery/charging) voltage warning (digital instrument cluster, 287C and later; the base 287 flags the same condition with an analog gauge or warning light). | A weak or failing battery, loose or corroded battery cables, or an alternator not charging. | Test battery voltage and charging output, inspect battery cables and grounds, and check the alternator belt and connections. |
| E878 | High hydraulic oil temperature warning, trips in the roughly 90-93 C (194-199 F) range (digital instrument cluster, 287C and later; the base 287 flags the same condition with an analog gauge). | Low hydraulic fluid, a clogged oil cooler, a failing cooler fan, or sustained high-load operation. | Stop and let the system cool, check hydraulic fluid level and the oil cooler for debris, and verify cooler fan operation. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
287 attachments & work tools
Model & class basis
Base-series Cat 287 multi-terrain loader runs the Cat 3034 turbocharged diesel, rated about 60 kW (80 hp) gross / 55 kW (74 hp) net. Operating weight is roughly 4,470 kg (9,860 lb) with a 50% tipping-load rating near 1,590 kg (3,500 lb) and max tipping load around 3,190 kg (7,030 lb), placing it in the large-frame MTL class. Later 287B/287C/287D variants use different engines (3044C DIT, C3.4 DIT, C3.3B respectively) and are treated as separate series for parts and attachment fitment.
Coupler / mounting system
Standard tool interface is a mechanical quick coupler with opposing wedges and two high-leverage hand levers for manual engage/disengage of work tools, using chrome-plated, lubricated vertical pins. An optional hydraulic quick coupler lets the operator engage or release tools from the seat without exiting the cab. The mounting face and hydraulic quick-connects are the same universal Cat work-tool interface used across the Cat skid steer and multi-terrain loader line, so most Cat SSL work tools are interchangeable on the 287.
Buckets
General-purpose, dirt/utility, multipurpose (4-in-1), light-material (high-volume), and grapple buckets are the core categories offered for this frame size. Light-material buckets are sized for low-density material such as snow, grain, fertilizer, or mulch rather than dense digging; general-purpose and dirt buckets are rated for earthmoving duty scaled to the machine's roughly 1,590 kg (3,500 lb) rated operating capacity. Grapple buckets add a hydraulically actuated top clamp for handling brush, debris, or irregular material.
Forks
Pallet forks and utility forks are offered for material handling and stacking work. These mount through the same quick-coupler interface as buckets and run off the standard auxiliary circuit only when a hydraulic positioning or clamp feature is fitted; plain fork frames need no auxiliary hydraulics.
Grading, dozing & compaction tools
Angle blades (dozer-style, hydraulically angled) and vibratory compactors (plate or roller-drum style) are offered for finish grading and soil/asphalt compaction. Angle blades typically use the standard ON/OFF auxiliary circuit for the angle function; vibratory compactors need the auxiliary hydraulic circuit to drive the vibration mechanism and benefit from proportional flow control for adjusting vibration intensity.
Augers
Vibratory/rotary auger drive units with interchangeable bits are offered for post-hole and footing work. Auger drives require continuous auxiliary hydraulic flow and are commonly run with proportional auxiliary hydraulics for smoother speed control while drilling.
Brooms
Utility (pickup) brooms and angle brooms are offered for sweeping and light debris collection in forward or reverse travel. Angle/side-shift brooms are candidates for the optional fourth hydraulic function, which lets the operator adjust broom angle from the cab without a second aux circuit swap.
Cold planers, mulchers, mowers & other high-demand tools
Cold planers (including side-shift versions), mulchers, brushcutters, and rotary mowers are offered for this class but are high-hydraulic-demand tools. These are best matched to the optional high-flow auxiliary circuit rather than the standard ON/OFF circuit; reported high-flow figures for this series (tied specifically to the 287B variant) run about 125 L/min (33 gal/min) at 28,000 kPa (4,060 psi), versus a standard fixed-displacement circuit around 81 L/min (22 gal/min) at 23,000 kPa (3,335 psi) - treat these numbers as varying by series/configuration and confirm against the specific unit's hydraulic package.
Hammers / breakers
Hydraulic hammers are offered in this class for demolition and light rock breaking. Hammers require the auxiliary hydraulic circuit sized to the tool, and larger hammers for this frame size are better suited to the optional high-flow circuit than the base ON/OFF auxiliary flow.
Landscape & forestry tools
Landscape rakes, landscape tillers, stump grinders, and material handling arms are offered for site prep and clearing work. Rakes and tillers run off the standard auxiliary circuit; stump grinders and tillers benefit from proportional flow control for consistent cutting/rotation speed.
Snow tools
Snowblowers and snow pusher/blade attachments are offered for winter service. Snowblowers require continuous auxiliary hydraulic flow to drive the blower rotor and are commonly paired with proportional auxiliary hydraulics for speed control.
Auxiliary hydraulic arrangement
ON/OFF auxiliary hydraulics for work-tool operation are standard, with quick-connect couplings mounted on the left loader arm. Proportional auxiliary hydraulics (variable flow control from the cab) and a fourth hydraulic function (for tools needing a second powered motion, such as side-shift planers or angle brooms) are factory options.
Cab & guarding configuration
Machine ships with ROPS/FOPS-rated protection; typical configuration choices across this loader line run from an open canopy with static seat up through an enclosed cab with heater/defroster, sliding side windows, and a glass or polycarbonate door, with air conditioning as a further step up. Electric work-tool controls and a self-leveling lift option are also offered, letting the operator select in-cab tool control style and keep attachments level through the lift cycle.
All 287 assemblies by section
Every catalogued assembly group for the Caterpillar 287. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
152-4893 Air Cleaner Gp
| 11***26 | Filter Element As-Air; (Primary) | 1 |
| 11***31 | Filter Element As-Air; (Secondary) | 1 |
| 11***17 | Valve-Dust; (Air Cleaner) | 1 |
226-5550 Lines Gp-Air
| 09***34 | Spacer; (9x20x10-mm Thk) | 2 |
| 14***19 | Elbow As | 1 |
| 15***30 | Indicator-Air Filter Change | 1 |
192-2615 Lines Gp-Air
| 14***19 | Elbow As | 1 |
| 15***30 | Indicator-Air Filter Change | 1 |
| 15***89 | Bracket | 1 |
253-4454 Muffler & Converter
| 25***54 | Muffler & Converter | 1 |
191-9778 Muffler Gp
| 14***18 | Clamp-Pipe | 1 |
| 14***25 | Elbow As-Exhaust | 1 |
| 19***78 | Muffler Group | 1 |
191-9777 Muffler Gp
| 14***49 | Gasket | 1 |
| 19***77 | Muffler Group | 1 |
| 19***78 | Muffler Group | 1 |
221-8475 Turbocharger Gp
| 03***47 | Ferrule | 2 |
| 03***14 | Nut; (7/16-In) | 1 |
| 06***58 | Clamp-Hose | 2 |
Basic Engine
172-6740 Camshaft Gp
| 10***41 | Bolt; (M6x1x10-mm) | 2 |
| 15***66 | Gear As-Idler; (59-Teeth) | 1 |
| 15***67 | Bushing | 2 |
164-7623 Cover Gp-Front Housing
| 10***63 | Bolt; (M10x1.5x80-mm) | 2 |
| 10***87 | Bolt; (M10x1.5x85-mm) | 2 |
| 16***23 | Cover Group-Front Housing | 1 |
195-9243 Cover Gp-Valve Mechanism
| 06***06 | Plug | 2 |
| 10***75 | Seal | 3 |
| 10***05 | Bolt; (M8x1.25x110-mm) | 1 |
173-1252 Crankshaft Gp
| 15***91 | Kit-Bearing | 1 |
| 15***99 | Washer-Thrust | 2 |
| 15***01 | Gear-Crankshaft; (30-Teeth) | 1 |
205-5491 Cylinder Block Gp
| 06***06 | Plug | 1 |
| 06***07 | Plug | 1 |
| 06***09 | Plug-Facing | 2 |
170-6666 Cylinder Block Gp
| 14***67 | Jet As-Piston Cooling | 4 |
| 14***49 | Dowel | 1 |
| 15***55 | Dowel | 2 |
172-6704 Cylinder Head Gp
| 15***57 | Valve-Exhaust | 4 |
| 15***58 | Spring | 8 |
| 15***59 | Cap | 8 |
172-6705 Cylinder Head Gp
| 15***62 | Bolt-Cylinder Head; (M11x1.5x104-mm) | 14 |
| 15***63 | Bolt-Cylinder Head; (M11x1.5-Thd, M8x1.25-Thd) | 4 |
| 15***64 | Gasket-Cylinder Head | 1 |
152-4858 Drain Gp-Engine Oil
| 15***58 | Drain Group-Engine Oil | 1 |
| 15***36 | Valve-Sampling | 1 |
| 5D***26 | Clamp-Band; (9/16 To 1 1/16) | 1 |
215-3488 Fastener Gp-Engine
| 10***49 | Spacer | 2 |
| 21***88 | Fastener Group-Engine | 1 |
| 4P***81 | Clip (For Use With 7.9mm Wide Tie Wrap) | 2 |
153-0077 Flywheel Gp
| 03***39 | Gear-Starter; (112-Teeth) | 1 |
| 15***72 | Flywheel As | 1 |
| 15***73 | Bolt | 8 |
222-5681 Guard Gp-Belt
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 3 |
| 21***92 | Bracket As | 1 |
| 22***81 | Guard Group-Belt | 1 |
222-5680 Guard Gp-Belt
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 3 |
| 14***09 | Guard | 1 |
| 15***96 | Bracket As | 1 |
153-1014 Housing Gp-Flywheel
| 10***57 | Plate | 1 |
| 15***13 | Dowel | 2 |
| 15***14 | Housing Group-Flywheel | 1 |
172-6739 Housing Gp-Front
| 10***51 | Bolt; (M8x1.25x65-mm) | 1 |
| 10***53 | Stud | 2 |
| 10***91 | Plug | 2 |
153-0561 Lifting Gp-Engine
| 10***58 | Bolt; (M8x1.25x14-mm) | 4 |
| 15***61 | Lifting Group-Engine | 1 |
| 15***63 | Plate | 2 |
153-1176 Mounting Gp-Alternator
| 15***76 | Mounting Group-Alternator | 1 |
| 6I***54 | Bolt; (M10x1.5x70-mm) | 1 |
142-8850 Mounting Gp-Engine
| 12***80 | Locknut; (M12x1.75-Thd) | 1 |
| 14***50 | Mounting Group-Engine | 1 |
| 14***53 | Bracket As | 1 |
164-7613 Mounting Gp-Starting Motor
| 16***13 | Mounting Group-Starting Motor | 1 |
| 6I***64 | Stud; (M10x1.5x30-mm) | 3 |
202-0950 Pan Gp-Oil
| 10***71 | Bolt | 1 |
| 11***63 | Bolt; (M8x1.25x12-mm) | 1 |
| 15***83 | Clip | 1 |
173-1253 Piston & Rod Gp
| 15***29 | Kit-Piston Ring | 4 |
| 17***53 | Piston & Rod Group | 1 |
| 17***63 | Piston As | 4 |
153-0693 Plug Gp-Cylinder Block
| 06***24 | Plug | 1 |
| 15***93 | Plug Group-Cylinder Block | 1 |
153-0319 Pulley Gp-Crankshaft
| 15***14 | Washer | 1 |
| 15***17 | Screw | 1 |
| 15***19 | Pulley Group-Crankshaft | 1 |
172-6711 Valve Mechanism Gp
| 03***62 | Plug | 2 |
| 15***72 | Rocker Arm As | 1 |
| 15***73 | Shaft As-Rocker Arm | 1 |
Cooling System
164-7622 Connection Gp-Water
| 12***99 | Bolt; (M10x1.5x40-mm) | 2 |
| 16***22 | Connection Group-Water | 1 |
| 20***40 | Connection As | 1 |
173-0410 Cooler Gp-Fltr Base & Eng Oil
| 11***45 | Connector | 1 |
| 16***21 | Bolt | 1 |
| 17***10 | Cooler Group-Filter Base & Eng Oil | 1 |
209-6429 Fan Gp-Blower
| 20***27 | Fan As | 1 |
| 20***25 | Adapter | 1 |
| 20***29 | Fan Group-Blower | 1 |
164-7633 Plug Gp-Water Lines
| 16***33 | Plug Group-Water Lines | 1 |
| 7M***10 | Plug 9.53mm(.375in.)Pipe Thd. | 1 |
173-1281 Pump Gp-Water
| 10***53 | Stud | 4 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
| 12***36 | Clamp-Hose | 2 |
142-8878 Radiator & Hyd Oil Cooler Gp
| 06***80 | Fitting | 1 |
| 12***27 | Cap As-Radiator | 1 |
| 14***72 | Guard As-Fan | 1 |
187-3216 Radiator & Oil Cooler Mtg Gp
| 12***64 | Clamp-Hose; (.76mm Id) | 1 |
| 14***67 | Clamp-Hose | 2 |
| 14***33 | Spacer; (11x14.3x9-mm Thk)(11x14.3x9mm Thk) | 1 |
Electrical And Starting System
142-9108 Alternator Gp-Charging
| 10***99 | Bolt-Socket Head; (M10x1.5x120-mm) | 1 |
| 10***79 | Bolt-Socket Head; (M10x1.5x90-mm) | 1 |
| 10***59 | Spacer; (13.5-mm Thk) | 1 |
220-8084 Alternator Gp-Charging
| 20***92 | Alternator Group-Charging | 1 |
| 21***73 | Bracket As | 1 |
| 22***84 | Alternator Group-Charging | 1 |
203-5492 Alternator Gp-Charging
| 11***58 | Pulley-Alternator | 1 |
| 11***65 | Kit-Alternator Bearing | 1 |
| 11***66 | Kit-Repair; (Alternator Brushes) | 1 |
142-7496 Battery Gp -Standard
| 14***96 | Battery Group; -Standard | 1 |
| 15***56 | Battery; (12-Volt, Maintenance Free)(24 V) | 1 |
| 19***29 | Clamp | 1 |
142-7520 Battery Gp -Heavy Duty
| 11***22 | Battery Group; (12-Volt, Maintenance Free, Wet) | 1 |
| 14***20 | Battery Group; -Heavy Duty | 1 |
| 19***29 | Clamp | 1 |
154-4233 Control Gp-Interlock
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 15***33 | Control Group-Interlock | 1 |
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
193-8374 Cover Gp-Fuse Panel
| 10***43 | Seal; (32-cm Each) | 0 |
| 11***71 | Puller-Minifuse | 1 |
| 11***89 | Retainer; (Stud) | 4 |
207-5262 Electronics Gp-Machine -Security
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 15***55 | Control Group-Unprogrammed; -Machine Security System | 1 |
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
153-0524 Glow Plug Gp
| 15***24 | Glow Plug Group | 1 |
| 16***58 | Cable | 3 |
| 17***59 | Plug-Glow | 4 |
168-7575 Heater Gp-Jacket Water
| 15***08 | Cord As-Heater | 1 |
| 16***74 | Element As-Jacket Water Heater; (Engine) | 1 |
| 16***75 | Heater Group-Jacket Water | 1 |
244-3796 Installation Ar-Security
| 09***49 | Bolt; (M8x1.25x40-mm) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
168-6410 Lamp Gp-Flood
| 16***10 | Lamp Group-Flood | 1 |
| 3E***54 | Bolt; (M8x1.25x20-mm) | 1 |
| 6V***89 | Locknut; (M8x1.25-Thd) | 2 |
142-8637 Lamp Gp-Flood
| 14***37 | Lamp Group-Flood | 1 |
| 3E***54 | Bolt; (M8x1.25x20-mm) | 1 |
| 6V***89 | Locknut; (M8x1.25-Thd) | 2 |
144-9933 Lamp Gp-Panel Illumination -Backlight
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 14***33 | Lamp Group-Panel Illumination; -Backlight | 1 |
| 18***10 | Lamp; (12-Volt)(Miniature) | 2 |
142-7503 Lamp Gp-Stop & Tail
| 08***48 | Lamp; (12-Volt, 5-Watt) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 14***03 | Lamp Group-Stop & Tail; -12-Volt | 1 |
128-6985 Lamp Gp-Warning Beacon -Amber, Magnetic Mount, Rotating
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 9R***42 | Plug As | 1 |
| 9R***58 | Cord As | 1 |
169-6689 Lighting Ar-Stop & Flood
| 14***50 | Lighting Group-Front | 1 |
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 16***89 | Lighting Ar-Stop & Flood | 1 |
142-8650 Lighting Gp-Front
| 14***37 | Lamp Group-Flood | 2 |
| 14***50 | Lighting Group-Front | 1 |
| 9D***08 | Grommet | 2 |
195-6722 Lighting Gp-Rear
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***26 | Switch As-Rocker; (Rear Working Lamp) | 1 |
| 16***10 | Lamp Group-Flood | 2 |
142-8652 Lighting Gp-Stop & Tail
| 14***03 | Lamp Group-Stop & Tail; -12-Volt | 2 |
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
142-8653 Lighting Gp-Warning Beacon
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 14***53 | Lighting Group-Warning Beacon; -12-Volt | 1 |
178-2254 Service Gp-Work Tool
| 12***97 | Screw-Pan Head; (No 8-32x0.375-In) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 17***54 | Service Group-Work Tool | 1 |
173-1338 Solenoid Gp-Shutoff
| 15***66 | Gasket | 1 |
| 17***09 | Solenoid As; (Shutoff)(Fuel) | 1 |
| 17***38 | Solenoid Group-Shutoff; -Fuel Injection | 1 |
144-9955 Starting Motor Gp-Electric
| 10***85 | Cap-Starting Motor | 1 |
| 10***12 | Kit-Contact; (Starting Motor) | 1 |
| 10***18 | Case As-Starting Motor | 1 |
154-3995 Starting Motor Gp-Electric
| 14***55 | Starting Motor Group-Electric | 1 |
| 15***95 | Starting Motor Group-Electric | 1 |
| 4P***34 | Clip-Ladder; (00800 mm ) | 1 |
171-4613 Switch Gp-Pressure -Engine Oil
| 06***07 | Plug | 1 |
| 15***62 | Adaptor | 1 |
| 17***13 | Switch Group-Pressure; -Engine Oil | 1 |
164-8388 Switch Gp-Temperature -Water
| 06***45 | Washer-(640mm Id, .064 Thk.) | 1 |
| 15***52 | Switch-Water Temperature | 1 |
| 16***88 | Switch Group-Temperature; -Water | 1 |
142-8656 Warning Gp-Backup
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***90 | Fuse; (10 Amp) | 1 |
| 14***56 | Warning Group-Backup | 1 |
220-5526 Wiring Gp-Air Conditioner
| 1H***44 | Lockwasher (Bracket To Cab) | 2 |
| 21***70 | Circuit Breaker As; (120-Ampere) | 1 |
| 22***26 | Wiring Group-Air Conditioner | 1 |
193-8375 Wiring Gp-Cab
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
197-6900 Wiring Gp-Engine
| 11***73 | Clip As-Connecting | 1 |
| 14***13 | Cable As-Battery; (Positive) | 1 |
| 14***17 | Cable As-Ground | 1 |
203-4327 Wiring Gp-Machine
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 6 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
212-6520 Wiring Gp-Quick Coupler
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 21***20 | Wiring Group-Quick Coupler | 1 |
| 21***21 | Switch As-Rocker; (Quick Coupler)(12-Volt) | 1 |
193-8379 Wiring Gp-Work Tool
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 2 |
| 10***42 | Diode Group | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
197-8467 Wiring Gp-Work Tool
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 2 |
| 10***42 | Diode Group | 1 |
| 11***60 | Strap | 1 |
Engine Arrangement
147-1234 Engine Ar-Primary
| 14***34 | Engine Ar-Primary | 1 |
| 15***77 | Flywheel Group | 1 |
| 15***19 | Pulley Group-Crankshaft | 1 |
191-9765 Installation Ar-Engine
| 14***50 | Mounting Group-Engine | 1 |
| 15***58 | Drain Group-Engine Oil | 1 |
| 15***93 | Air Cleaner Group | 1 |
Frame And Body
154-4000 Bumper Gp -Rear
| 14***21 | Stud | 2 |
| 15***00 | Bumper Group; -Rear | 1 |
| 15***06 | Boss | 2 |
191-9741 Counterweight Gp
| 19***41 | Counterweight Group | 1 |
| 19***42 | Block | 1 |
| 19***43 | Plate | 1 |
190-8042 Counterweight Gp
| 19***42 | Counterweight Group | 1 |
| 19***42 | Block | 1 |
| 19***43 | Plate | 1 |
191-9750 Enclosure Gp-Engine
| 11***85 | Bumper | 2 |
| 14***01 | Hood As | 1 |
| 14***02 | Door As-Access | 1 |
212-4075 Frame & Mtg Gp-Machine
| 15***71 | Cover | 1 |
| 19***21 | Plate | 1 |
| 20***33 | Step As; (Lh) | 1 |
228-9250 Frame Gp-Machine
| 19***98 | Arm As-Lift | 1 |
| 21***74 | Frame As-Upper | 1 |
| 22***50 | Frame Group-Machine | 1 |
150-8621 Guide Gp-Lines
| 15***21 | Guide Group-Lines | 1 |
| 22***15 | Plate As | 1 |
| 24***77 | Bolt; (M8x1.25x12-mm) | 1 |
264-5864 Kit-Engine Enclosure Seal -Debris Barrier
| 12***43 | Seal; (70-cm) | 0 |
| 26***54 | Baffle | 1 |
| 26***55 | Baffle | 1 |
190-8090 Lifting Gp-Machine
| 15***54 | Bracket As-Lift | 1 |
| 15***56 | Plate | 4 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 8 |
188-0147 Lifting Gp-Machine -4-Point
| 14***26 | Plate-Lift | 4 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 8 |
| 18***47 | Lifting Group-Machine; -4-Point | 1 |
Fuel System
234-0731 Cable Gp-Governor Control
| 12***58 | Rod End-Yoke | 1 |
| 23***31 | Cable Group-Governor Control | 1 |
| 5C***74 | Nut (M5x.8 Thd); (M5x0.8-Thd) | 1 |
215-3980 Control Gp-Governor
| 12***78 | Locknut; (M6x1-Thd) | 2 |
| 19***60 | Bracket As | 1 |
| 21***80 | Control Group-Governor | 1 |
226-7905 Filter & Lines Gp-Fuel
| 03***47 | Ferrule | 1 |
| 03***00 | Washer; (0.531x0.718x0.064-In Thk) | 2 |
| 03***81 | Nut; (7/16-24-Thd) | 2 |
223-0713 Filter Gp-Water Sep & Fuel
| 10***39 | Nut | 1 |
| 10***40 | Cap; (Fuel Filter) | 1 |
| 10***41 | Seal; (Plunger) | 1 |
153-1006 Fitting Gp-Fuel Lines
| 06***68 | Nut-Fuel Line; (1/2-In) | 1 |
| 06***69 | Olive-Fuel Tube | 1 |
| 15***06 | Fitting Group-Fuel Lines | 1 |
173-0122 Governor Gp
| 10***45 | Bolt; (M5x0.8x10-mm) | 4 |
| 13***41 | Washer | 1 |
| 13***12 | Nut | 3 |
220-8101 Lines Gp-Fuel
| 11***08 | Tube | 1 |
| 14***27 | Guard As | 1 |
| 14***28 | Cap As-Filler; (Fuel) | 1 |
170-7498 Pump Gp-Fuel Injection
| 06***98 | Nut; (3/8-24-Thd) | 1 |
| 06***99 | Ferrule | 1 |
| 12***33 | Dowel | 2 |
219-4398 Tank & Mtg Gp-Fuel
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***10 | Gasket | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
219-4399 Tank Gp-Fuel
| 11***83 | Connector | 1 |
| 19***32 | Adapter As | 1 |
| 21***99 | Tank Group-Fuel | 1 |
Hydraulic System
193-0447 Accumulator & Mtg Gp-Hydraulic
| 14***86 | Accumulator Group-Hydraulic; -Charged | 1 |
| 19***47 | Accumulator & Mtg Group-Hydraulic; -Work Tool | 1 |
| 19***31 | Elbow; (45-Deg) | 1 |
149-0686 Accumulator Gp-Hydraulic -Charged
| 14***86 | Accumulator Group-Hydraulic; -Charged | 1 |
214-5557 Cylinder & Mtg Gp-Angle Blade
| 21***55 | Pin As | 1 |
| 21***43 | Bushing | 1 |
| 21***44 | Bushing | 1 |
190-7999 Cylinder & Mtg Gp-Lift Arm
| 08***97 | Washer; (13x50x6-mm Thk) | 2 |
| 11***37 | Washer; (46x70x1-mm Thk)(1mm`Thk) | 12 |
| 14***32 | Pin As | 2 |
293-6264 Cylinder Gp-Bucket
| 26***41 | Kit-Seal | 1 |
| 29***64 | Cylinder Group-Bucket | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
154-5018 Cylinder Gp-Bucket
| 15***18 | Cylinder Group-Bucket | 1 |
| 16***13 | Kit-Seal | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
156-5512 Cylinder Gp-Grapple
| 15***12 | Cylinder Group-Grapple | 1 |
| 16***13 | Kit-Seal | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
164-9295 Cylinder Gp-Grapple
| 16***95 | Cylinder Group-Grapple | 1 |
| 17***85 | Kit-Seal | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
278-1975 Cylinder Gp-Grapple -Industrial
| 25***97 | Bearing-Sleeve | 1 |
| 25***42 | Bearing-Sleeve | 1 |
| 27***70 | Kit-Seal; (Hydraulic Cylinder) | 1 |
255-0943 Cylinder Gp-Grapple
| 25***97 | Bearing-Sleeve | 1 |
| 25***43 | Cylinder Group-Grapple | 1 |
| 28***91 | Kit-Seal | 1 |
192-2640 Cylinder Gp-Hydraulic -Coupler
| 19***40 | Cylinder Group-Hydraulic; -Coupler | 1 |
278-1969 Cylinder Gp-Hydraulic
| 25***97 | Bearing-Sleeve | 1 |
| 27***69 | Cylinder Group-Hydraulic | 1 |
| 27***70 | Kit-Seal; (Hydraulic Cylinder) | 1 |
225-9521 Cylinder Gp-Hydraulic -Angle Blade
| 17***58 | Kit-Seal | 1 |
| 21***55 | Rod End As | 1 |
| 22***21 | Cylinder Group-Hydraulic; -Angle Blade | 1 |
190-8041 Cylinder Gp-Lift
| 19***41 | Cylinder Group-Lift | 1 |
| 20***05 | Kit-Seal | 1 |
| 6V***98 | Seal-O-Ring -Line From Gear Pump Output | 2 |
177-9565 Cylinder Gp-Tilt -Rh
| 14***92 | Kit-Seal | 1 |
| 17***65 | Cylinder Group-Tilt; -Rh | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
177-9566 Cylinder Gp-Tilt -Lh
| 14***92 | Kit-Seal | 1 |
| 17***66 | Cylinder Group-Tilt; -Lh | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
212-4102 Hydraulic Ar
| 14***80 | Filter & Mtg Group-Hydraulic | 1 |
| 19***84 | Pump & Mtg Group-Work Tool | 1 |
| 19***85 | Valve & Mtg Group-Control | 1 |
190-8051 Hydraulic Ar
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***16 | Switch Group-Rocker; -Work Tool Positioner | 1 |
| 19***51 | Hydraulic Ar | 1 |
190-8050 Hydraulic Ar
| 19***50 | Hydraulic Ar | 1 |
| 19***60 | Lines Group-Lift Cylinder | 1 |
| 19***70 | Lines Group-Tilt Cylinder | 1 |
214-5556 Kit-Angle Blade Cyl & Lines
| 21***56 | Kit-Angle Blade Cyl & Lines | 1 |
| 21***57 | Cylinder & Mtg Group-Angle Blade | 1 |
| 21***58 | Lines Group-Hydraulic | 1 |
240-5285 Kit-Pilot Valve
| 24***85 | Kit-Pilot Valve | 1 |
199-8306 Lines Gp-Bucket
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
279-5413 Lines Gp-Bucket -Multipurpose
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
285-6113 Lines Gp-Bucket -Utility
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***95 | Fitting As; (Quick Disconnect, Male) | 1 |
279-5414 Lines Gp-Bucket -Multipurpose
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
279-5416 Lines Gp-Bucket -Multipurpose
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
154-5052 Lines Gp-Bucket
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
154-5019 Lines Gp-Bucket
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
279-5412 Lines Gp-Bucket -Industrial
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***95 | Fitting As; (Quick Disconnect, Male) | 1 |
279-5415 Lines Gp-Bucket -Multipurpose
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
286-9250 Lines Gp-Grapple
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 16***89 | Hose As | 2 |
161-0187 Lines Gp-Grapple
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***95 | Fitting As; (Quick Disconnect, Male) | 1 |
286-9279 Lines Gp-Grapple
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 16***89 | Hose As | 2 |
165-8733 Lines Gp-Grapple
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***95 | Fitting As; (Quick Disconnect, Male) | 1 |
214-5558 Lines Gp-Hydraulic
| 17***87 | Connector As | 4 |
| 21***52 | Valve Group-Relief | 1 |
| 21***58 | Lines Group-Hydraulic | 1 |
212-6630 Lines Gp-Hydraulic Fan
| 14***16 | Connector Group | 1 |
| 14***90 | Elbow Group | 2 |
| 15***21 | Hose As | 1 |
225-9278 Lines Gp-Hydraulic Fan
| 14***15 | Connector As | 2 |
| 14***16 | Connector Group | 2 |
| 15***24 | Hex Head Plug; (-4sae) (D6r Iii) | 1 |
225-9286 Lines Gp-Hydraulic Fan
| 14***15 | Connector As | 1 |
| 20***81 | Strap-Cable | 1 |
| 22***86 | Lines Group-Hydraulic Fan | 1 |
190-8116 Lines Gp-Hydraulic Fan
| 14***15 | Connector As | 1 |
| 19***16 | Lines Group-Hydraulic Fan | 1 |
| 19***11 | Hose As | 1 |
191-9782 Lines Gp-Hydraulic Oil Cooler
| 10***29 | Stud; (M10x1.5-Thd) | 1 |
| 14***27 | Connector Group | 2 |
| 19***82 | Lines Group-Hydraulic Oil Cooler | 1 |
190-8060 Lines Gp-Lift Cylinder
| 14***37 | Block | 2 |
| 14***38 | Plate | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
190-8061 Lines Gp-Lift Cylinder
| 14***37 | Block | 2 |
| 14***38 | Plate | 2 |
| 14***15 | Connector As | 2 |
230-3713 Lines Gp-Pilot
| 14***16 | Connector Group | 2 |
| 14***25 | Connector As. | 5 |
| 14***68 | Elbow Group | 1 |
230-3714 Lines Gp-Pilot
| 12***50 | Valve-Check; (Quick Coupler Solenoid) | 1 |
| 14***16 | Hose As | 1 |
| 14***20 | Block | 1 |
230-3688 Lines Gp-Pump
| 14***39 | Connector As. | 1 |
| 14***92 | Elbow; (-12 Orfs/-12 Orfs Swivel) | 1 |
| 15***49 | Hose | 1 |
190-8115 Lines Gp-Pump
| 14***60 | Elbow Group | 1 |
| 15***49 | Hose | 1 |
| 15***40 | Hose; (30cm) | 1 |
190-8070 Lines Gp-Tilt Cylinder
| 10***03 | Plate-Cover | 2 |
| 14***34 | Hose As | 4 |
| 14***41 | Connector Group | 2 |
190-8071 Lines Gp-Tilt Cylinder
| 10***03 | Plate-Cover | 2 |
| 14***34 | Hose As | 4 |
| 14***15 | Connector As | 2 |
190-8110 Lines Gp-Work Tool
| 10***03 | Plate-Cover | 2 |
| 14***41 | Connector Group | 2 |
| 19***73 | Hose As | 2 |
190-8052 Manifold & Mtg Gp-Control
| 19***52 | Manifold & Mtg Group-Control | 1 |
| 22***18 | Manifold & Solenoid Group-Control; -Work Tool Positioner | 1 |
| 8T***44 | Bolt-Plt; (M6 X 1.0 X 70) | 2 |
223-8418 Manifold & Solenoid Gp-Control
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 1 |
| 15***79 | Kit-Seal; (Relief Valve, Conveyor Cont) | 1 |
225-9276 Motor & Mtg Gp-Hydraulic Fan
| 21***93 | Motor Group-Gear; -Hydraulic Fan | 1 |
| 22***76 | Motor & Mtg Group-Hydraulic Fan | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
191-9676 Motor & Mtg Gp-Hydraulic Fan
| 19***76 | Motor & Mtg Group-Hydraulic Fan | 1 |
| 21***63 | Motor Group-Gear; -Hydraulic Fan | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
216-6163 Motor Gp-Gear -Hydraulic Fan
| 18***61 | Gasket | 1 |
| 18***62 | Kit-Valve; (Check) | 1 |
| 18***63 | Kit-Valve; (Relief) | 1 |
216-6193 Motor Gp-Gear -Hydraulic Fan
| 09***94 | Ring-Retaining | 1 |
| 21***93 | Motor Group-Gear; -Hydraulic Fan | 1 |
| 22***40 | Valve Group-Relief; (Gear Motor) | 1 |
156-0891 Mounting Gp-Cylinder
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 15***13 | Plate | 1 |
| 15***41 | Pin | 2 |
165-8731 Mounting Gp-Cylinder
| 15***13 | Pin | 2 |
| 16***31 | Mounting Group-Cylinder; -Utility | 1 |
| 6V***89 | Locknut; (M8x1.25-Thd) | 2 |
286-9248 Mounting Gp-Cylinder -Grapple Bucket
| 15***41 | Pin | 2 |
| 15***42 | Pin | 2 |
| 28***48 | Mounting Group-Cylinder; -Grapple Bucket | 1 |
154-5011 Mounting Gp-Cylinder
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***12 | Pin | 2 |
| 15***13 | Pin | 2 |
142-8714 Plug Gp-Pilot Valve
| 14***14 | Plug Group-Pilot Valve | 1 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
190-8084 Pump & Mtg Gp-Work Tool
| 17***97 | Pump Group-Gear | 1 |
| 19***84 | Pump & Mtg Group-Work Tool | 1 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 2 |
177-3397 Pump Gp-Gear
| 10***41 | Ring-Snap | 1 |
| 13***15 | Seal-Shaft | 1 |
| 17***97 | Pump Group-Gear | 1 |
204-1490 Tank & Mtg Gp-Hydraulic
| 15***14 | Bracket | 1 |
| 20***90 | Tank & Mtg Group-Hydraulic | 1 |
| 20***91 | Tank Group-Hydraulic | 1 |
204-1491 Tank Gp-Hydraulic
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 6 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***56 | Seal-O-Ring | 1 |
207-9755 Valve & Lines Gp-Coupler
| 11***64 | Clip-Loop | 4 |
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 14***25 | Connector As. | 4 |
234-0772 Valve & Lines Gp-Coupler
| 11***64 | Clip-Loop | 4 |
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 14***25 | Connector As. | 4 |
190-8085 Valve & Mtg Gp-Control
| 19***85 | Valve & Mtg Group-Control | 1 |
| 19***89 | Bracket | 1 |
| 21***70 | Valve Group-Control | 1 |
209-0640 Valve & Mtg Gp-Solenoid
| 14***44 | Valve Group-Solenoid | 1 |
| 18***69 | Manifold | 1 |
| 20***40 | Valve & Mtg Group-Solenoid | 1 |
216-6170 Valve Gp-Control
| 00***82 | Spring | 3 |
| 12***16 | Bolt-Shoulder | 1 |
| 14***31 | Valve-Check | 3 |
240-5284 Valve Gp-Pilot -Direction, Speed
| 12***04 | Plate | 1 |
| 15***65 | Kit-Seal; (Pilot Valve) | 1 |
| 15***70 | Kit-Pilot Valve; (Lever) | 1 |
204-1399 Valve Gp-Pilot -Work Tool
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 15***70 | Kit-Pilot Valve; (Lever) | 1 |
| 16***78 | Kit-Pilot Valve; (Spring)(Pilot Valve Lift & Dump) | 1 |
188-0878 Valve Gp-Relief -Main
| 03***79 | Seal-O-Ring (Id=10.82mm) | 3 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 2 |
| 03***69 | Nut; (3/8-24-Thd) | 1 |
195-9700 Valve Gp-Solenoid -12-Volt
| 19***00 | Valve Group-Solenoid; -12-Volt-Work Tool | 1 |
| 20***71 | Kit-Seal; (Solenoid Valve) | 1 |
| 21***61 | Flange | 1 |
144-1644 Valve Gp-Solenoid
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***48 | Kit-Seal; (Solenoid Valve) | 1 |
| 14***43 | Solenoid As | 1 |
185-4254 Valve Gp-Solenoid
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
| 18***54 | Valve Group-Solenoid; -Auxiliary | 1 |
| 21***73 | Nut; (1/2-28-Thd) | 1 |
Implements
190-7998 Arm As-Lift
| 19***98 | Arm As-Lift | 1 |
| 19***37 | Plate | 1 |
| 19***38 | Plate | 1 |
Lubrication System
173-0140 Pump Gp-Engine Oil
| 15***82 | Dowel | 2 |
| 15***83 | Bolt; (M6x1.0x25mm) | 3 |
| 15***88 | Valve As; (Oil Check)(Engine) | 1 |
Machine Arrangement
212-4101 Chassis Ar
| 14***54 | Mounting Group-Rops | 1 |
| 15***21 | Guide Group-Lines | 1 |
| 15***00 | Bumper Group; -Rear | 1 |
212-4100 Common Ar
| 14***34 | Engine Ar-Primary | 1 |
| 19***65 | Installation Ar-Engine | 1 |
| 21***00 | Common Ar | 1 |
Operator Station
176-3900 Accumulator Gp-Refrigerant -With Desiccant
| 17***00 | Accumulator Group-Refrigerant; -With Desiccant | 1 |
219-4351 Air Conditioner & Mounting Gp
| 15***80 | Filter Group-Cab Air | 1 |
| 19***19 | Stud; (M6x1 Thd) | 4 |
| 21***51 | Air Conditioner & Mounting Group | 1 |
219-7182 Air Conditioner Gp
| 20***98 | Knob-Control; (Temperature Select) | 1 |
| 21***82 | Air Conditioner Group | 1 |
| 23***62 | Cable-Control | 1 |
320-1389 Arm Gp-Window Wiper
| 13***91 | Nozzle As-Washer | 1 |
| 19***71 | Hose; (116-cm) | 0 |
| 24***66 | Clip-Washer Hose | 2 |
195-6721 Armrest & Mounting Gp
| 14***76 | Armrest Group | 1 |
| 14***88 | Plate | 2 |
| 19***37 | Insert-Threaded; (M8x1.25-Thd) | 2 |
142-9276 Armrest Gp
| 10***62 | Screw-Machine; (4-40x0.63-In) | 4 |
| 13***16 | Stud-Ball | 2 |
| 14***28 | Locknut; (4-40-Thd) | 4 |
206-3819 Cab Gp-Enclosed Rops
| 19***81 | Cab Group-Enclosed Rops | 1 |
| 19***35 | Insert-Threaded; (M6x1-Thd) | 4 |
| 19***36 | Insert-Threaded; (M6x1-Thd) | 12 |
219-4391 Compressor & Mtg Gp-Refrig
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***33 | Switch As-Pressure; (A/C) | 1 |
| 12***96 | Fitting As-Air Conditioner | 1 |
218-4994 Compressor Gp-Refrigerant
| 21***94 | Compressor Group-Refrigerant | 1 |
| 22***96 | Seal-O-Ring | 2 |
219-4352 Condenser & Mtg Gp-Refrigerant
| 12***78 | Locknut; (M6x1-Thd) | 6 |
| 21***52 | Condenser & Mtg Group-Refrigerant | 1 |
| 22***63 | Fan Group-Suction | 1 |
204-1395 Control Gp-Handle -Speed & Direction
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 15***53 | Grommet | 1 |
| 20***95 | Control Group-Handle; -Speed & Direction | 1 |
160-4320 Control Gp-Handle -Work Tool
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 15***53 | Grommet | 1 |
| 16***20 | Control Group-Handle; -Work Tool | 1 |
242-8279 Control Gp-Handle
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
204-1396 Control Gp-Handle -Speed & Direction
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 15***53 | Grommet | 1 |
| 20***96 | Control Group-Handle; -Speed & Direction | 1 |
230-3724 Control Gp-Pilot Operated Hyd
| 11***60 | Strap | 1 |
| 11***83 | Pin-Spring | 1 |
| 19***04 | Horn Group-Electric | 1 |
190-8095 Control Gp-Pilot Operated Hyd
| 11***60 | Strap | 1 |
| 11***83 | Pin-Spring | 1 |
| 19***92 | Bracket As | 1 |
230-3721 Control Gp-Pilot Operated Hyd
| 11***60 | Strap | 1 |
| 11***83 | Pin-Spring | 1 |
| 19***88 | Bracket As | 1 |
230-3722 Control Gp-Pilot Operated Hyd
| 11***60 | Strap | 1 |
| 11***83 | Pin-Spring | 1 |
| 19***04 | Horn Group-Electric | 1 |
190-8080 Control Gp-Pilot Operated Hyd
| 11***60 | Strap | 1 |
| 11***83 | Pin-Spring | 1 |
| 16***20 | Control Group-Handle; -Work Tool | 1 |
142-9274 Cover Gp-Console
| 14***68 | Plate | 1 |
| 14***70 | Cover | 1 |
| 14***72 | Plate | 1 |
142-9118 Cover Gp-Instrument Panel -Service Meter
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 2 |
| 10***04 | Suppressor As-Arc | 1 |
| 14***18 | Cover Group-Instrument Panel; -Service Meter | 1 |
195-6726 Door & Mtg Gp-Cab
| 12***18 | Seal; (1000-cm) | 0 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 8 |
| 14***27 | Harness As-Window Wiper | 1 |
195-6724 Door & Mtg Gp-Cab
| 12***18 | Seal; (1000-cm) | 0 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 8 |
| 14***27 | Harness As-Window Wiper | 1 |
218-6441 Door Gp-Cab -Polycarbonate
| 03***28 | Grommet | 1 |
| 10***45 | Blade As-Wiper; (600-mm) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
142-9340 Door Gp-Cab -Glass
| 10***57 | Strip; (Locking) (275cm) | 0 |
| 10***56 | Seal; (275cm) | 0 |
| 10***71 | Clevis | 1 |
233-5813 Door Gp-Cab
| 03***28 | Grommet | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
276-3615 Door Gp-Cab -Polycarbonate
| 27***15 | Door Group-Cab; -Polycarbonate | 1 |
| 27***32 | Seal | 1 |
| 28***59 | Frame As | 1 |
159-5801 Door Gp-Cab -Polycarbonate
| 10***57 | Strip; (Locking) (275cm) | 0 |
| 10***56 | Seal; (275cm) | 0 |
| 10***71 | Clevis | 1 |
218-6431 Door Gp-Cab -Glass
| 21***31 | Door Group-Cab; -Glass | 1 |
| 22***09 | Glass-Cab; (Door) | 1 |
| 22***10 | Glass-Cab; (Door) | 1 |
233-5812 Door Gp-Cab -Polycarbonate
| 03***28 | Grommet | 1 |
| 10***45 | Blade As-Wiper; (600-mm) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
223-0616 Door Gp-Cab -Glass
| 03***28 | Grommet | 1 |
| 10***45 | Blade As-Wiper; (600-mm) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
219-4358 Duct Gp-Cab Air
| 21***66 | Louver As | 5 |
| 21***58 | Duct Group-Cab Air | 1 |
| 21***59 | Duct | 1 |
152-4880 Filter Gp-Cab Air
| 14***90 | Cover As-Filter | 1 |
| 14***91 | Filter; (Heater Air) | 1 |
| 15***76 | Seal | 1 |
200-1008 Floor Mat
| 20***08 | Floor Mat | 1 |
197-6898 Gauge & Warning Gp -Lh
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 4 |
| 14***58 | Switch As-Start; (Key)(Ignition) | 1 |
| 14***30 | Module Group-Warning Indicator; -With Alarm, Function Lights | 1 |
197-6899 Gauge & Warning Gp -Rh
| 08***77 | Lamp Group-Dome; (12-Volt) | 1 |
| 15***55 | Gauge Group-Fuel Level | 1 |
| 15***97 | Panel | 1 |
152-1160 Guard Gp-Rops/Fops
| 15***60 | Guard Group-Rops/Fops | 1 |
| 15***61 | Plate As-Fops | 1 |
| 5P***27 | Seal 10.65m (41.93 In.) | 0 |
218-6118 Handle Gp-Modular
| 15***53 | Grommet | 1 |
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
220-8143 Heater & Mtg Gp-Cab
| 15***80 | Filter Group-Cab Air | 1 |
| 19***19 | Stud; (M6x1 Thd) | 4 |
| 22***43 | Heater & Mtg Group-Cab | 1 |
222-5721 Heater & Mtg Gp-Cab -Kit
| 11***92 | Fuse; (20 Amp) | 1 |
| 13***53 | Hose; (192.5cm) (X2) | 0 |
| 15***68 | Adapter | 1 |
220-8144 Heater Gp-Cab
| 20***98 | Knob-Control; (Temperature Select) | 1 |
| 22***44 | Heater Group-Cab | 1 |
| 23***62 | Cable-Control | 1 |
190-8004 Horn Gp-Electric
| 11***90 | Fuse; (10 Amp) | 1 |
| 16***25 | Horn As; (24-Volt, Low Tone) | 1 |
| 19***04 | Horn Group-Electric | 1 |
222-5722 Installation Ar -Heater And Air Conditioner
| 09***34 | Spacer; (9x20x10-mm Thk) | 2 |
| 11***92 | Fuse; (20 Amp) | 1 |
| 16***33 | Film-Instruction; (Work Tool Control, Rh) | 1 |
220-8110 Installation Ar -Air Conditioner
| 19***43 | Lines Group-Heater | 1 |
| 21***39 | Lines Group-Air Conditioner | 1 |
| 21***51 | Air Conditioner & Mounting Group | 1 |
225-9230 Installation Ar -With Heater
| 14***08 | Alternator Group-Charging | 1 |
| 19***43 | Lines Group-Heater | 1 |
| 19***15 | Lines Group-Air | 1 |
225-9227 Installation Ar -Without Heater
| 14***08 | Alternator Group-Charging | 1 |
| 14***74 | Cover Group-Console | 1 |
| 19***15 | Lines Group-Air | 1 |
223-8416 Installation Ar -Air Conditioner
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***92 | Fuse; (20 Amp) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
266-9189 Kit-Air Cond & Heater Instl
| 00***10 | Elbow | 1 |
| 09***34 | Spacer; (9x20x10-mm Thk) | 2 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 3 |
266-9216 Kit-Air Conditioner Instl
| 09***34 | Spacer; (9x20x10-mm Thk) | 2 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 3 |
| 10***96 | Clip | 2 |
233-5962 Kit-Cab Door & Mounting -Glass
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***18 | Seal; (1000-cm) | 0 |
233-5963 Kit-Cab Door & Mounting -Polycarbonate
| 09***25 | Pin-Clevis | 1 |
| 12***18 | Seal; (1000-cm) | 0 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 8 |
178-2253 Kit-Cab Door & Mounting
| 09***25 | Pin-Clevis | 1 |
| 12***43 | Seal; (70-cm) | 0 |
| 12***18 | Seal; (1000-cm) | 0 |
178-2252 Kit-Cab Door & Mounting
| 09***25 | Pin-Clevis | 1 |
| 12***43 | Seal; (70-cm) | 0 |
| 12***18 | Seal; (1000-cm) | 0 |
276-3442 Kit-Cab Door & Mounting
| 03***28 | Grommet | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***43 | Seal; (70-cm) | 0 |
266-9184 Kit-Cab Heater & Mounting
| 00***10 | Elbow | 1 |
| 11***92 | Fuse; (20 Amp) | 1 |
| 13***53 | Hose; (192.5cm) (X2) | 0 |
234-0774 Lever Gp-Governor
| 12***78 | Locknut; (M6x1-Thd) | 2 |
| 19***63 | Lever Group-Hand Control; (Governor) | 1 |
| 23***32 | Cable As | 1 |
195-6725 Liner Gp-Cab
| 14***53 | Insulation | 1 |
| 15***71 | Compartment As | 1 |
| 19***35 | Insert-Threaded; (M6x1-Thd) | 4 |
142-9311 Liner-Cab
| 14***11 | Liner-Cab; -Gray | 1 |
219-4339 Lines Gp-Air Conditioner
| 10***96 | Clip | 2 |
| 17***00 | Accumulator Group-Refrigerant; -With Desiccant | 1 |
| 21***39 | Lines Group-Air Conditioner | 1 |
190-7943 Lines Gp-Heater
| 00***10 | Elbow | 1 |
| 13***53 | Hose; (192.5cm) (X2) | 0 |
| 18***20 | Guard-Hose | 2 |
6v-1970 Literature Gp
| 5P***58 | Sleeve; (Cable Splice) | 1 |
| 5P***00 | Key Total 2 Pieces Per Unit; (Literature Compartment) | 2 |
| 6V***70 | Literature Group; (Literature Compartment) | 1 |
223-6539 Module Gp-Warning Indicator -With Alarm
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 10 |
| 22***39 | Module Group-Warning Indicator; -With Alarm | 1 |
144-9930 Module Gp-Warning Indicator -With Alarm, Function Lights
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 14***30 | Module Group-Warning Indicator; -With Alarm, Function Lights | 1 |
| 14***34 | Gasket; (Indicator Module) | 1 |
161-7522 Motor Gp-Window Wiper
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 16***22 | Motor Group-Window Wiper | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
142-9354 Mounting Gp-Rops
| 14***54 | Mounting Group-Rops | 1 |
| 15***78 | Mount As | 2 |
| 15***81 | Mount | 2 |
219-4381 Operator Ar-Enclosed Rops
| 19***81 | Cab Group-Enclosed Rops | 1 |
| 19***21 | Armrest & Mounting Group | 1 |
| 19***25 | Liner Group-Cab | 1 |
195-6791 Panel Ar-Instrument
| 19***71 | Panel Group-Instrument | 1 |
| 19***91 | Panel Ar-Instrument | 1 |
193-8371 Panel Gp-Instrument
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 16 |
| 10***56 | Plug; (Switch) | 2 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
219-4383 Panel Gp-Side
| 13***43 | Bolt-Round Head; (M6x1-6g-Thd) | 5 |
| 19***85 | Plate; (Rh) | 1 |
| 21***83 | Panel Group-Side | 1 |
192-2661 Pedal Gp-Governor
| 12***78 | Locknut; (M6x1-Thd) | 1 |
| 16***54 | Kit-Service; (Pedal) | 1 |
| 19***61 | Pedal Group-Governor | 1 |
234-0730 Pedal Gp-Governor
| 19***61 | Pedal Group-Governor | 1 |
| 23***30 | Pedal Group-Governor | 1 |
| 23***31 | Cable Group-Governor Control | 1 |
234-0770 Platform Gp-Operator
| 15***68 | Strip | 2 |
| 19***58 | Floorplate As | 1 |
| 19***75 | Insulation As | 2 |
187-3201 Seal Gp-Cab
| 12***43 | Seal; (70-cm) | 0 |
| 18***01 | Seal Group-Cab | 1 |
| 18***02 | Bracket As | 1 |
188-0141 Seal Gp-Cab
| 18***01 | Seal Group-Cab | 1 |
| 18***41 | Seal Group-Cab | 1 |
220-8082 Seat Belt Gp
| 0T***44 | Bolt (1.25" Long) | 2 |
| 22***82 | Seat Belt Group; -Retractable, 2-In | 1 |
| 6E***49 | Washer; (11x27x6-mm Thk) | 2 |
220-8081 Seat Belt Gp
| 0T***44 | Bolt (1.25" Long) | 1 |
| 22***81 | Seat Belt Group; -Retractable, 3-In | 1 |
| 6E***49 | Washer; (11x27x6-mm Thk) | 1 |
220-8083 Seat Belt Gp
| 0T***44 | Bolt (1.25" Long) | 2 |
| 22***83 | Seat Belt Group; -Retractable, 3-In | 1 |
| 6E***49 | Washer; (11x27x6-mm Thk) | 2 |
220-8080 Seat Belt Gp
| 0T***44 | Bolt (1.25" Long) | 1 |
| 22***80 | Seat Belt Group; -Retractable, 2-In | 1 |
| 6E***49 | Washer; (11x27x6-mm Thk) | 1 |
276-6018 Seat Belt Gp
| 0T***44 | Bolt (1.25" Long) | 1 |
| 27***18 | Seat Belt Group | 1 |
| 2D***12 | Washer; (7/16x15/16x1/4-In Thk) | 1 |
276-6019 Seat Belt Gp
| 0T***44 | Bolt (1.25" Long) | 2 |
| 27***19 | Seat Belt Group | 1 |
| 2D***12 | Washer; (7/16x15/16x1/4-In Thk) | 2 |
276-7276 Seat Belt Gp
| 0T***44 | Bolt (1.25" Long) | 2 |
| 27***76 | Seat Belt Group; -Suspension | 1 |
| 2D***12 | Washer; (7/16x15/16x1/4-In Thk) | 2 |
276-7275 Seat Belt Gp
| 0T***44 | Bolt (1.25" Long) | 1 |
| 27***75 | Seat Belt Group | 1 |
| 2D***12 | Washer; (7/16x15/16x1/4-In Thk) | 1 |
142-9310 Seat Gp -Static
| 14***09 | Seat Group | 1 |
| 14***10 | Seat Group; -Static | 1 |
| 14***46 | Bracket | 1 |
142-9305 Seat Gp -Suspension
| 14***05 | Seat Group; -Suspension | 1 |
| 21***80 | Seat Group-Adjustable | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 4 |
219-4380 Seat Gp-Adjustable
| 15***85 | Wire As | 1 |
| 15***86 | Switch As; (Seat) | 1 |
| 15***11 | Kit-Spring; (Adjustable Seat) | 1 |
177-3403 Spring Gp-Gas
| 09***25 | Pin-Clevis | 2 |
| 15***82 | Spring-Gas; (Non-Locking) | 2 |
| 15***83 | Spring As-Gas; (Locking) | 2 |
187-3213 Window Gp-Cab
| 15***88 | Window Group-Cab; -Rh | 1 |
| 15***89 | Window Group-Cab; -Lh | 1 |
| 18***13 | Window Group-Cab | 1 |
142-9363 Window Gp-Cab
| 14***63 | Window Group-Cab | 1 |
| 15***25 | Plate | 1 |
| 15***88 | Window Group-Cab; -Rh | 1 |
154-7988 Window Gp-Cab -Rh
| 15***88 | Window Group-Cab; -Rh | 1 |
| 20***30 | Glass; (Slider) | 1 |
| 20***31 | Glass; (Slider) | 1 |
154-7989 Window Gp-Cab -Lh
| 15***89 | Window Group-Cab; -Lh | 1 |
| 20***30 | Glass; (Slider) | 1 |
| 20***31 | Glass; (Slider) | 1 |
195-6723 Window Gp-Cab
| 14***19 | Window; (Rear) | 1 |
| 19***68 | Insulation | 1 |
| 19***23 | Window Group-Cab; -Rear | 1 |
Power Train
210-4672 Bearing Gp-Sprocket
| 19***58 | Bearing | 1 |
| 19***77 | Seal | 1 |
| 21***72 | Bearing Group-Sprocket | 1 |
278-1240 Bearing Gp-Sprocket
| 27***40 | Bearing Group-Sprocket | 1 |
| 27***64 | Flange As | 1 |
| 27***65 | Seal | 1 |
212-4107 Drive Control Ar-Hydrostatic -One Speed
| 21***07 | Drive Control Ar-Hydrostatic; -One Speed | 1 |
| 21***47 | Undercarriage Ar | 1 |
| 21***15 | Pump & Mtg Group-Hydrostatic | 1 |
212-4106 Drive Control Ar-Hydrostatic -One Speed
| 21***06 | Drive Control Ar-Hydrostatic; -One Speed | 1 |
| 21***47 | Undercarriage Ar | 1 |
| 21***15 | Pump & Mtg Group-Hydrostatic | 1 |
212-4105 Drive Control Ar-Hydrostatic -One Speed
| 21***05 | Drive Control Ar-Hydrostatic; -One Speed | 1 |
| 21***47 | Undercarriage Ar | 1 |
| 21***15 | Pump & Mtg Group-Hydrostatic | 1 |
220-8158 Drive Gp-Track -Lh
| 15***70 | Lockwasher | 8 |
| 19***03 | Plug | 1 |
| 20***31 | Guard As | 1 |
220-8147 Drive Gp-Track -Rh
| 15***70 | Lockwasher | 8 |
| 19***03 | Plug | 1 |
| 20***31 | Guard As | 1 |
142-8980 Filter & Mtg Gp-Hydraulic
| 14***80 | Filter & Mtg Group-Hydraulic | 1 |
| 19***84 | Filter Group-Oil; -Implement Pilot Oil | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
191-9784 Filter Gp-Oil
| 18***64 | Valve As-Fluid Sampling; (Transmission) | 1 |
| 19***84 | Filter Group-Oil; -Implement Pilot Oil | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
230-3701 Lines Gp-Hydraulic Filter
| 14***41 | Connector Group | 2 |
| 19***02 | Tube As | 1 |
| 19***17 | Tube As | 1 |
219-4318 Lines Gp-Hydrostatic
| 12***87 | Flange-Split | 8 |
| 14***25 | Connector As. | 1 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 5 |
219-4313 Lines Gp-Hydrostatic -Rh
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
| 21***13 | Lines Group-Hydrostatic; -Rh | 1 |
219-4314 Lines Gp-Hydrostatic -Lh
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
| 1P***02 | Seal-Rectangular 28.83mm(1.136in) Id | 2 |
| 21***14 | Lines Group-Hydrostatic; -Lh | 1 |
219-4315 Lines Gp-Parking Brake
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 21***15 | Lines Group-Parking Brake | 1 |
| 22***29 | Hose As | 1 |
219-4316 Lines Gp-Parking Brake
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 21***16 | Lines Group-Parking Brake | 1 |
| 22***29 | Hose As | 1 |
219-4317 Manifold & Lines Gp-Control -Parking Brake
| 14***63 | Hose As | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
| 19***60 | Fitting-Cross | 1 |
208-1237 Manifold & Solenoid Gp-Control
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 19***00 | Valve Group-Solenoid; -12-Volt-Work Tool | 1 |
| 20***73 | Manifold As | 1 |
210-4708 Manifold Gp-Return
| 14***77 | Valve Group-Check; (Axle Oil Cooler Bypass) | 1 |
| 14***16 | Connector Group | 1 |
| 14***27 | Connector Group | 2 |
220-8142 Motor Gp-Piston -Hydrostatic
| 14***46 | Kit-Shim; (Piston Motor) | 1 |
| 14***49 | Bearing | 1 |
| 17***73 | Disc-Brake; (Outer) | 14 |
220-8160 Mounting Gp-Axle
| 22***60 | Mounting Group-Axle | 1 |
| 23***29 | Spacer; (85.7x12.7-mm Thk) | 4 |
| 23***30 | Spacer; (63.5x88.9x8-mm Thk) | 4 |
212-4104 Power Train Ar
| 21***04 | Power Train Ar | 1 |
| 21***18 | Lines Group-Hydrostatic | 1 |
216-6115 Pump & Mtg Gp-Hydrostatic
| 11***56 | Flange; (314mm Od) | 1 |
| 19***42 | Hub-Coupling | 1 |
| 21***15 | Pump & Mtg Group-Hydrostatic | 1 |
228-9236 Pump Gp-Piston
| 10***15 | Shim; (1.2-mm Thk) | 1 |
| 10***65 | Circlip | 2 |
| 11***57 | Pin | 2 |
219-4320 Sprocket Gp
| 19***32 | Sleeve-Inner | 24 |
| 19***33 | Sleeve-Outer | 24 |
| 1K***72 | Locknut Horn To Guard | 12 |
Service Equipment And Supplies
212-4103 Film Gp
| 12***10 | Film; (Red Stripe)(Red Stripe - 1225 cm) | 0 |
| 16***86 | Film-Stripe; (Rh) | 1 |
| 16***87 | Film-Stripe; (Lh) | 1 |
212-6597 Film Gp
| 12***10 | Film; (Red Stripe)(Red Stripe - 1225 cm) | 0 |
| 15***62 | Film-Information; (Tie-Down Location) | 4 |
| 16***86 | Film-Stripe; (Rh) | 1 |
212-4150 Plate & Film Gp
| 15***34 | Film-Warning; (Universal) | 1 |
| 16***40 | Film-Notice; (Engine Start Procedure) | 1 |
| 16***41 | Film-Operation Manual; (Omm) | 1 |
212-4151 Plate & Film Gp -Spanish
| 10***69 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 16***46 | Film-Warning; (Universal) | 1 |
| 17***26 | Film-Instruction; (Omm) | 1 |
212-4153 Plate & Film Gp -English
| 10***30 | Film; (Warning) (Accumulator Pressure) (On Bracket Covering Brake Accumulator) | 1 |
| 15***49 | Film; (Radiator) | 1 |
| 15***62 | Film-Information; (Tie-Down Location) | 4 |
286-9251 Plate & Film Gp
| 16***89 | Tack-Fastener | 4 |
| 22***69 | Film-Warning; (Do Not Operate, Read Omm) | 1 |
| 24***18 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
195-6740 Plate & Film Gp
| 19***40 | Plate & Film Group | 1 |
| 19***10 | Film-Identification; (Synthetic Hydraulic Oil, Read Omm) | 1 |
212-4152 Plate & Film Gp -French
| 10***68 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 16***20 | Film-Warning; (Universal) | 1 |
| 17***25 | Film-Instruction; (Omm) | 1 |
236-5108 Tool & Mtg Gp-Track Tensioner
| 21***25 | Tool Group-Track Tensioner | 1 |
| 23***94 | Bracket As | 1 |
| 23***08 | Tool & Mtg Group-Track Tensioner | 1 |
210-0825 Tool Gp-Track Tensioner
| 21***25 | Tool Group-Track Tensioner | 1 |
| 21***40 | Shaft As; (Rear) | 1 |
| 21***41 | Shaft As; (Front) | 1 |
Undercarriage
222-5688 Axle Gp-Bogie
| 10***87 | Plug-Pipe | 1 |
| 19***28 | Seal | 2 |
| 19***29 | Bearing | 4 |
230-3734 Axle Gp-Idler
| 10***87 | Plug-Pipe | 1 |
| 11***14 | Cone-Roller Bearing | 2 |
| 11***15 | Cup-Roller Bearing | 2 |
230-3756 Bearing Gp-Axle
| 23***90 | Bracket As | 1 |
| 23***55 | Bearing-Sleeve | 2 |
| 23***56 | Bearing Group-Axle | 1 |
220-8156 Frame Gp-Undercarriage -Lh
| 11***93 | Lockwasher | 36 |
| 19***70 | Locknut; (3/8-16-Thd) | 4 |
| 20***71 | Plate | 10 |
215-3952 Frame Gp-Undercarriage -Rh
| 11***93 | Lockwasher | 36 |
| 19***70 | Locknut; (3/8-16-Thd) | 4 |
| 20***71 | Plate | 10 |
305-9256 Kit-Undercarriage
| 19***32 | Sleeve-Inner | 48 |
| 19***33 | Sleeve-Outer | 48 |
| 1K***72 | Locknut Horn To Guard | 24 |
215-3949 Undercarriage Ar -Rh
| 21***49 | Undercarriage Ar; -Rh | 1 |
| 21***52 | Frame Group-Undercarriage; -Rh | 1 |
| 21***13 | Lines Group-Hydrostatic; -Rh | 1 |
215-3951 Undercarriage Ar -Lh
| 21***51 | Undercarriage Ar; -Lh | 1 |
| 21***14 | Lines Group-Hydrostatic; -Lh | 1 |
| 21***16 | Lines Group-Parking Brake | 1 |
215-3947 Undercarriage Ar
| 21***47 | Undercarriage Ar | 1 |
| 21***48 | Axle As-Front | 1 |
| 21***49 | Undercarriage Ar; -Rh | 1 |
261-6296 Wheel Gp-Bogie
| 10***87 | Plug-Pipe | 1 |
| 11***93 | Lockwasher | 24 |
| 22***03 | Bolt-Carriage; (3/8-16x1.75-In) | 24 |
222-5689 Wheel Gp-Bogie
| 11***93 | Lockwasher | 24 |
| 22***88 | Axle Group-Bogie | 1 |
| 22***89 | Wheel Group-Bogie | 1 |
222-5685 Wheel Gp-Idler
| 1K***72 | Locknut Horn To Guard | 24 |
| 22***84 | Cap As | 2 |
| 22***85 | Wheel Group-Idler | 1 |
261-6302 Wheel Gp-Idler
| 10***87 | Plug-Pipe | 1 |
| 1K***72 | Locknut Horn To Guard | 24 |
| 22***72 | Bolt-Carriage; (1/2-13x1.75-In) | 24 |
Work Tools
216-8756 Arm Gp-Material Handling
| 15***62 | Film-Information; (Tie-Down Location) | 2 |
| 18***33 | Step Group-Material Handling Arm | 1 |
| 21***56 | Arm Group-Material Handling | 1 |
325-7058 Blade Gp-Multipurpose Bucket
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 32***58 | Blade Group-Multipurpose Bucket | 1 |
279-5387 Blade Gp-Multipurpose Bucket
| 15***59 | Edge | 1 |
| 27***87 | Blade Group-Multipurpose Bucket | 1 |
279-5385 Blade Gp-Multipurpose Bucket
| 15***37 | Edge | 1 |
| 27***85 | Blade Group-Multipurpose Bucket | 1 |
279-5384 Blade Gp-Multipurpose Bucket
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***84 | Blade Group-Multipurpose Bucket | 1 |
325-7049 Blade Gp-Multipurpose Bucket
| 15***59 | Edge | 1 |
| 32***44 | Guard As; (66-In) | 1 |
| 32***49 | Blade Group-Multipurpose Bucket | 1 |
159-5347 Blade Gp-Multipurpose Bucket
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***80 | Blade Group-Multipurpose Bucket | 1 |
| 15***47 | Blade Group-Multipurpose Bucket | 1 |
279-5396 Blade Gp-Multipurpose Bucket
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***95 | Blade Group-Multipurpose Bucket | 1 |
325-7039 Blade Gp-Multipurpose Bucket
| 15***37 | Edge | 1 |
| 32***34 | Guard As; (60-In) | 1 |
| 32***39 | Blade Group-Multipurpose Bucket | 1 |
279-5395 Blade Gp-Multipurpose Bucket
| 15***77 | Edge | 1 |
| 27***95 | Blade Group-Multipurpose Bucket | 1 |
154-5080 Blade Gp-Multipurpose Bucket
| 15***77 | Edge | 1 |
| 15***80 | Blade Group-Multipurpose Bucket | 1 |
325-7059 Blade Gp-Multipurpose Bucket
| 15***77 | Edge | 1 |
| 32***54 | Guard As; (72-In) | 1 |
| 32***59 | Blade Group-Multipurpose Bucket | 1 |
279-5388 Blade Gp-Multipurpose Bucket
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***87 | Blade Group-Multipurpose Bucket | 1 |
279-5406 Blade Gp-Multipurpose Bucket
| 19***16 | Edge | 1 |
| 27***06 | Blade Group-Multipurpose Bucket | 1 |
325-7068 Blade Gp-Multipurpose Bucket
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 32***68 | Blade Group-Multipurpose Bucket | 1 |
279-5405 Blade Gp-Multipurpose Bucket
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***05 | Blade Group-Multipurpose Bucket | 1 |
325-7069 Blade Gp-Multipurpose Bucket
| 19***16 | Edge | 1 |
| 32***64 | Guard As; (78-In) | 1 |
| 32***69 | Blade Group-Multipurpose Bucket | 1 |
325-7048 Blade Gp-Multipurpose Bucket
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 32***48 | Blade Group-Multipurpose Bucket | 1 |
159-5345 Blade Gp-Multipurpose Bucket
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***45 | Blade Group-Multipurpose Bucket | 1 |
| 16***89 | Tack-Fastener | 4 |
325-7038 Blade Gp-Multipurpose Bucket
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 32***38 | Blade Group-Multipurpose Bucket, Protective Cover | 1 |
279-5441 Bucket Ar-Dirt
| 13***85 | Edge Group-Cutting | 1 |
| 27***40 | Bucket As-Dirt | 1 |
| 27***41 | Bucket Ar-Dirt | 1 |
279-5438 Bucket Ar-Dirt
| 13***84 | Edge Group-Cutting | 1 |
| 27***37 | Bucket As-Dirt | 1 |
| 27***38 | Bucket Ar-Dirt | 1 |
285-6090 Bucket Ar-Dirt
| 13***86 | Edge Group-Cutting | 1 |
| 28***89 | Bucket As-Dirt | 1 |
| 28***90 | Bucket Ar-Dirt, Turbocharger | 1 |
279-5435 Bucket Ar-Dirt
| 13***83 | Edge Group-Cutting | 1 |
| 27***34 | Bucket As-Dirt | 1 |
| 27***35 | Bucket Ar-Dirt | 1 |
279-5377 Bucket Ar-General Purpose
| 13***87 | Edge Group-Cutting | 1 |
| 27***76 | Bucket As-General Purpose | 1 |
| 27***77 | Bucket Ar-General Purpose | 1 |
279-5365 Bucket Ar-General Purpose
| 13***84 | Edge Group-Cutting | 1 |
| 27***64 | Bucket As-General Purpose | 1 |
| 27***65 | Bucket Ar-General Purpose | 1 |
279-5370 Bucket Ar-General Purpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
279-5366 Bucket Ar-General Purpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
279-5369 Bucket Ar-General Purpose
| 13***85 | Edge Group-Cutting | 1 |
| 27***68 | Bucket As-General Purpose | 1 |
| 27***69 | Bucket Ar-General Purpose | 1 |
279-5373 Bucket Ar-General Purpose
| 13***86 | Edge Group-Cutting | 1 |
| 27***72 | Bucket As-General Purpose | 1 |
| 27***73 | Bucket Ar-General Purpose | 1 |
229-3426 Bucket Ar-General Purpose
| 14***99 | Tooth Group-Uni | 9 |
| 22***26 | Bucket Ar-General Purpose | 1 |
| 22***27 | Bucket As-General Purpose | 1 |
279-5378 Bucket Ar-General Purpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 9 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
279-5374 Bucket Ar-General Purpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
158-6095 Bucket Ar-Grapple
| 13***86 | Edge Group-Cutting | 1 |
| 15***25 | Bucket Ar-Grapple; -Industrial | 1 |
| 15***95 | Bucket Ar-Grapple; -Industrial | 1 |
285-6111 Bucket Ar-Grapple
| 28***00 | Bucket Ar-Utility | 1 |
| 28***11 | Bucket Ar-Grapple | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
217-6229 Bucket Ar-Grapple
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***87 | Lines Group-Grapple; -Industrial | 1 |
| 21***28 | Bucket Group-Grapple | 1 |
285-6112 Bucket Ar-Grapple
| 28***01 | Bucket Ar-Utility | 1 |
| 28***12 | Bucket Ar-Grapple | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
217-6230 Bucket Ar-Grapple
| 13***87 | Edge Group-Cutting | 1 |
| 21***29 | Bucket Ar-Grapple | 1 |
| 21***30 | Bucket Ar-Grapple | 1 |
286-9301 Bucket Ar-Grapple
| 28***44 | Bucket Group-Grapple | 1 |
| 28***48 | Mounting Group-Cylinder; -Grapple Bucket | 1 |
| 28***50 | Lines Group-Grapple | 1 |
286-9300 Bucket Ar-Grapple
| 28***48 | Mounting Group-Cylinder; -Grapple Bucket | 1 |
| 28***51 | Plate & Film Group | 1 |
| 28***78 | Bucket Group-Grapple | 1 |
157-7225 Bucket Ar-Grapple -Industrial
| 15***86 | Bucket Group-Grapple; -Industrial | 1 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 15***12 | Cylinder Group-Grapple | 2 |
165-8780 Bucket Ar-Grapple -Utility
| 16***34 | Grapple & Cylinder Group-Utility | 1 |
| 16***78 | Bucket Group-Utility | 1 |
| 16***80 | Bucket Ar-Grapple; -Utility | 1 |
285-6104 Bucket Ar-Grapple
| 28***02 | Bucket Group-Utility | 1 |
| 28***04 | Bucket Ar-Grapple | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
285-6093 Bucket Ar-Grapple
| 28***93 | Bucket Ar-Grapple | 1 |
| 28***99 | Bucket Group-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
279-5430 Bucket Ar-Light Material
| 19***24 | Edge Group-Cutting | 1 |
| 27***29 | Bucket As-Light Material | 1 |
| 27***30 | Bucket Ar-Light Material | 1 |
279-5420 Bucket Ar-Light Material
| 13***86 | Edge Group-Cutting | 1 |
| 27***20 | Bucket Ar-Light Material | 1 |
| 27***21 | Bucket As-Light Material | 1 |
279-5425 Bucket Ar-Light Material
| 13***87 | Edge Group-Cutting | 1 |
| 27***24 | Bucket As-Light Material | 1 |
| 27***25 | Bucket Ar-Light Material | 1 |
154-5010 Bucket Ar-Multipurpose
| 15***09 | Bucket Group-Multipurpose | 1 |
| 15***10 | Bucket Ar-Multipurpose | 1 |
| 15***11 | Mounting Group-Cylinder | 1 |
279-5403 Bucket Ar-Multipurpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
| 16***36 | Cover Group-Lines | 1 |
154-5004 Bucket Ar-Multipurpose
| 15***04 | Bucket Ar-Multipurpose | 1 |
| 15***05 | Bucket Group-Multipurpose | 1 |
| 15***11 | Mounting Group-Cylinder | 1 |
199-8321 Bucket Ar-Multipurpose
| 13***87 | Edge Group-Cutting | 1 |
| 19***20 | Bucket Ar-Multipurpose | 1 |
| 19***21 | Bucket Ar-Multipurpose | 1 |
325-7065 Bucket Ar-Multipurpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 9 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
279-5390 Bucket Ar-Multipurpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
| 16***36 | Cover Group-Lines | 1 |
279-5398 Bucket Ar-Multipurpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
| 16***36 | Cover Group-Lines | 1 |
325-7055 Bucket Ar-Multipurpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
325-7070 Bucket Ar-Multipurpose
| 13***87 | Edge Group-Cutting | 1 |
| 32***66 | Bucket Ar-Multipurpose | 1 |
| 32***70 | Bucket Ar-Multipurpose | 1 |
325-7040 Bucket Ar-Multipurpose
| 13***84 | Edge Group-Cutting | 1 |
| 32***36 | Bucket Ar-Multipurpose, Protective Cover | 1 |
| 32***40 | Bucket Ar-Multipurpose | 1 |
279-5381 Bucket Ar-Multipurpose
| 13***84 | Edge Group-Cutting | 1 |
| 27***81 | Bucket Ar-Multipurpose | 1 |
| 27***82 | Bucket Ar-Multipurpose | 1 |
325-7036 Bucket Ar-Multipurpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 16***36 | Cover Group-Lines | 1 |
| 27***69 | Cylinder Group-Hydraulic | 2 |
325-7066 Bucket Ar-Multipurpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 16***36 | Cover Group-Lines | 1 |
| 27***69 | Cylinder Group-Hydraulic | 2 |
154-5049 Bucket Ar-Multipurpose
| 13***86 | Edge Group-Cutting | 1 |
| 15***10 | Bucket Ar-Multipurpose | 1 |
| 15***49 | Bucket Ar-Multipurpose | 1 |
279-5382 Bucket Ar-Multipurpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
| 16***36 | Cover Group-Lines | 1 |
279-5401 Bucket Ar-Multipurpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 9 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
325-7060 Bucket Ar-Multipurpose
| 13***86 | Edge Group-Cutting | 1 |
| 32***56 | Bucket Ar-Multipurpose | 1 |
| 32***60 | Bucket Ar-Multipurpose | 1 |
199-8322 Bucket Ar-Multipurpose
| 14***99 | Tooth Group-Uni | 9 |
| 19***20 | Bucket Ar-Multipurpose | 1 |
| 19***22 | Bucket Ar-Multipurpose | 1 |
325-7056 Bucket Ar-Multipurpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 16***36 | Cover Group-Lines | 1 |
| 27***69 | Cylinder Group-Hydraulic | 2 |
279-5391 Bucket Ar-Multipurpose
| 13***85 | Edge Group-Cutting | 1 |
| 27***90 | Bucket Ar-Multipurpose | 1 |
| 27***91 | Bucket Ar-Multipurpose | 1 |
279-5392 Bucket Ar-Multipurpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
279-5380 Bucket Ar-Multipurpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
279-5399 Bucket Ar-Multipurpose
| 13***86 | Edge Group-Cutting | 1 |
| 27***98 | Bucket Ar-Multipurpose | 1 |
| 27***99 | Bucket Ar-Multipurpose | 1 |
154-5050 Bucket Ar-Multipurpose
| 14***99 | Tooth Group-Uni | 8 |
| 15***10 | Bucket Ar-Multipurpose | 1 |
| 15***50 | Bucket Ar-Multipurpose | 1 |
325-7035 Bucket Ar-Multipurpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
279-5400 Bucket Ar-Multipurpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
199-8320 Bucket Ar-Multipurpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
| 16***36 | Cover Group-Lines | 1 |
325-7045 Bucket Ar-Multipurpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
325-7050 Bucket Ar-Multipurpose
| 13***85 | Edge Group-Cutting | 1 |
| 32***46 | Bucket Ar-Multipurpose | 1 |
| 32***50 | Bucket Ar-Multipurpose | 1 |
325-7046 Bucket Ar-Multipurpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 16***36 | Cover Group-Lines | 1 |
| 27***69 | Cylinder Group-Hydraulic | 2 |
279-5402 Bucket Ar-Multipurpose
| 13***87 | Edge Group-Cutting | 1 |
| 27***02 | Bucket Ar-Multipurpose | 1 |
| 27***03 | Bucket Ar-Multipurpose | 1 |
285-6095 Bucket Ar-Utility
| 13***84 | Edge Group-Cutting | 1 |
| 28***95 | Bucket Ar-Utility | 1 |
| 28***96 | Bucket Group-Utility | 1 |
285-6100 Bucket Ar-Utility
| 13***85 | Edge Group-Cutting | 1 |
| 28***99 | Bucket Group-Utility | 1 |
| 28***00 | Bucket Ar-Utility | 1 |
285-6101 Bucket Ar-Utility
| 13***86 | Edge Group-Cutting | 1 |
| 28***01 | Bucket Ar-Utility | 1 |
| 28***02 | Bucket Group-Utility | 1 |
279-5436 Bucket As-Dirt
| 14***35 | Edge | 1 |
| 27***36 | Bucket As-Dirt | 1 |
165-6157 Bucket As-Dirt
| 14***04 | Bucket As-Dirt | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***57 | Bucket As-Dirt | 1 |
188-2716 Bucket As-Dirt
| 14***37 | Edge | 1 |
| 18***16 | Bucket As-Dirt | 1 |
279-5433 Bucket As-Dirt
| 14***34 | Edge | 1 |
| 27***33 | Bucket As-Dirt | 1 |
285-6088 Bucket As-Dirt
| 14***37 | Edge | 1 |
| 28***88 | Bucket As-Dirt | 1 |
279-5440 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***39 | Bucket As-Dirt | 1 |
152-0227 Bucket As-Dirt
| 14***35 | Edge | 1 |
| 15***27 | Bucket As-Dirt | 1 |
279-5437 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***36 | Bucket As-Dirt | 1 |
285-6089 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 28***88 | Bucket As-Dirt | 1 |
188-3526 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 18***16 | Bucket As-Dirt | 1 |
141-6704 Bucket As-Dirt
| 14***04 | Bucket As-Dirt | 1 |
| 14***36 | Edge | 1 |
165-6156 Bucket As-Dirt
| 15***27 | Bucket As-Dirt | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***56 | Bucket As-Dirt | 1 |
279-5434 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***33 | Bucket As-Dirt | 1 |
279-5439 Bucket As-Dirt
| 14***36 | Edge | 1 |
| 27***39 | Bucket As-Dirt | 1 |
229-3427 Bucket As-General Purpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 22***27 | Bucket As-General Purpose | 1 |
165-6154 Bucket As-General Purpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***54 | Bucket As-General Purpose | 1 |
| 16***89 | Tack-Fastener | 4 |
279-5376 Bucket As-General Purpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***75 | Bucket As-General Purpose | 1 |
279-5371 Bucket As-General Purpose
| 14***37 | Edge | 1 |
| 27***71 | Bucket As-General Purpose | 1 |
279-5372 Bucket As-General Purpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***71 | Bucket As-General Purpose | 1 |
279-5375 Bucket As-General Purpose
| 19***22 | Edge | 1 |
| 27***75 | Bucket As-General Purpose | 1 |
279-5363 Bucket As-General Purpose
| 14***35 | Edge | 1 |
| 27***63 | Bucket As-General Purpose | 1 |
199-7720 Bucket As-General Purpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 19***20 | Bucket As-General Purpose | 1 |
229-3428 Bucket As-General Purpose
| 22***28 | Bucket As-General Purpose | 1 |
| 22***32 | Edge | 1 |
279-5364 Bucket As-General Purpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***63 | Bucket As-General Purpose | 1 |
279-5368 Bucket As-General Purpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***67 | Bucket As-General Purpose | 1 |
279-5367 Bucket As-General Purpose
| 14***36 | Edge | 1 |
| 27***67 | Bucket As-General Purpose | 1 |
217-6227 Bucket As-Grapple
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 21***26 | Bucket As-Grapple | 1 |
156-0889 Bucket As-Grapple
| 14***37 | Edge | 1 |
| 15***89 | Bucket As-Grapple | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
217-6226 Bucket As-Grapple
| 16***30 | Plate-Identification; (Cat) | 2 |
| 19***22 | Edge | 1 |
| 21***26 | Bucket As-Grapple | 1 |
169-8943 Bucket As-Grapple
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***89 | Bucket As-Grapple | 1 |
| 16***89 | Tack-Fastener | 4 |
279-5429 Bucket As-Light Material
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***28 | Bucket As-Light Material | 1 |
279-5422 Bucket As-Light Material
| 14***37 | Edge | 1 |
| 27***22 | Bucket As-Light Material | 1 |
279-5423 Bucket As-Light Material
| 19***22 | Edge | 1 |
| 27***23 | Bucket As-Light Material | 1 |
279-5421 Bucket As-Light Material
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***21 | Bucket As-Light Material | 1 |
279-5428 Bucket As-Light Material
| 22***82 | Edge | 1 |
| 27***28 | Bucket As-Light Material | 1 |
279-5424 Bucket As-Light Material
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***23 | Bucket As-Light Material | 1 |
164-7415 Bucket As-Light Material
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***15 | Bucket As-Light Material | 1 |
| 16***89 | Tack-Fastener | 4 |
164-7414 Bucket As-Light Material
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***14 | Bucket As-Light Material | 1 |
| 16***89 | Tack-Fastener | 4 |
285-6103 Bucket As-Utility
| 14***37 | Edge | 1 |
| 28***03 | Bucket As-Utility | 1 |
165-8747 Bucket As-Utility
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***47 | Bucket As-Utility | 1 |
| 16***33 | Bucket As-Utility | 1 |
285-6097 Bucket As-Utility
| 14***35 | Edge | 1 |
| 28***97 | Bucket As-Utility | 1 |
285-6098 Bucket As-Utility
| 14***36 | Edge | 1 |
| 28***98 | Bucket As-Utility, Fuel Injection Pump; - Assembly | 1 |
152-0232 Bucket Gp-Dirt
| 13***85 | Edge Group-Cutting | 1 |
| 15***32 | Bucket Group-Dirt | 1 |
| 16***57 | Bucket As-Dirt | 1 |
188-2719 Bucket Gp-Dirt
| 13***86 | Edge Group-Cutting | 1 |
| 18***19 | Bucket Group-Dirt | 1 |
| 18***26 | Bucket As-Dirt | 1 |
152-0231 Bucket Gp-Dirt
| 13***84 | Edge Group-Cutting | 1 |
| 15***31 | Bucket Group-Dirt | 1 |
| 16***56 | Bucket As-Dirt | 1 |
152-0229 Bucket Gp-General Purpose
| 13***86 | Edge Group-Cutting | 1 |
| 15***29 | Bucket Group-General Purpose | 1 |
| 16***54 | Bucket As-General Purpose | 1 |
152-0228 Bucket Gp-General Purpose
| 14***99 | Tooth Group-Uni | 8 |
| 15***28 | Bucket Group-General Purpose | 1 |
| 16***54 | Bucket As-General Purpose | 1 |
199-7726 Bucket Gp-General Purpose
| 13***87 | Edge Group-Cutting | 1 |
| 19***20 | Bucket As-General Purpose | 1 |
| 19***26 | Bucket Group-General Purpose | 1 |
229-3433 Bucket Gp-General Purpose
| 19***24 | Edge Group-Cutting | 1 |
| 22***27 | Bucket As-General Purpose | 1 |
| 22***33 | Bucket Group-General Purpose | 1 |
199-7727 Bucket Gp-General Purpose
| 14***99 | Tooth Group-Uni | 9 |
| 19***20 | Bucket As-General Purpose | 1 |
| 19***27 | Bucket Group-General Purpose | 1 |
286-9244 Bucket Gp-Grapple
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 28***29 | Tine Group | 1 |
279-5359 Bucket Gp-Grapple -Industrial
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
286-9278 Bucket Gp-Grapple
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 28***43 | Fork As | 2 |
156-0886 Bucket Gp-Grapple
| 15***86 | Bucket Group-Grapple; -Industrial | 1 |
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
217-6228 Bucket Gp-Grapple
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 21***27 | Bucket As-Grapple | 1 |
164-7412 Bucket Gp-Light Material
| 13***86 | Edge Group-Cutting | 1 |
| 16***12 | Bucket Group-Light Material | 1 |
| 16***14 | Bucket As-Light Material | 1 |
164-7413 Bucket Gp-Light Material
| 13***87 | Edge Group-Cutting | 1 |
| 16***13 | Bucket Group-Light Material | 1 |
| 16***15 | Bucket As-Light Material | 1 |
325-7047 Bucket Gp-Multipurpose
| 15***12 | Pin | 2 |
| 15***53 | Clam As-Multipurpose Bucket | 1 |
| 32***47 | Bucket Group-Multipurpose | 1 |
279-5389 Bucket Gp-Multipurpose
| 15***12 | Pin | 2 |
| 15***53 | Clam As-Multipurpose Bucket | 1 |
| 27***88 | Blade Group-Multipurpose Bucket | 1 |
325-7057 Bucket Gp-Multipurpose
| 15***12 | Pin | 2 |
| 15***70 | Clam As-Multipurpose Bucket | 1 |
| 32***57 | Bucket Group-Multipurpose | 1 |
325-7037 Bucket Gp-Multipurpose
| 14***32 | Clam As-Multipurpose Bucket | 1 |
| 15***12 | Pin | 2 |
| 32***37 | Bucket Group-Multipurpose | 1 |
154-5009 Bucket Gp-Multipurpose
| 15***09 | Bucket Group-Multipurpose | 1 |
| 15***12 | Pin | 2 |
| 15***70 | Clam As-Multipurpose Bucket | 1 |
199-8319 Bucket Gp-Multipurpose
| 14***05 | Bearing-Sleeve | 4 |
| 15***12 | Pin | 2 |
| 15***38 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
279-5383 Bucket Gp-Multipurpose
| 14***32 | Clam As-Multipurpose Bucket | 1 |
| 15***12 | Pin | 2 |
| 27***83 | Bucket Group-Multipurpose | 1 |
279-5404 Bucket Gp-Multipurpose
| 15***12 | Pin | 2 |
| 19***08 | Clam As-Multipurpose Bucket | 1 |
| 27***04 | Bucket Group-Multipurpose | 1 |
154-5005 Bucket Gp-Multipurpose
| 14***32 | Clam As-Multipurpose Bucket | 1 |
| 15***05 | Bucket Group-Multipurpose | 1 |
| 15***12 | Pin | 2 |
325-7067 Bucket Gp-Multipurpose
| 15***12 | Pin | 2 |
| 19***08 | Clam As-Multipurpose Bucket | 1 |
| 32***67 | Bucket Group-Multipurpose | 1 |
279-5397 Bucket Gp-Multipurpose
| 15***12 | Pin | 2 |
| 15***70 | Clam As-Multipurpose Bucket | 1 |
| 27***96 | Blade Group-Multipurpose Bucket | 1 |
285-6096 Bucket Gp-Utility
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 28***96 | Bucket Group-Utility | 1 |
285-6099 Bucket Gp-Utility
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 28***98 | Bucket As-Utility, Fuel Injection Pump; - Assembly | 1 |
285-6102 Bucket Gp-Utility
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 28***02 | Bucket Group-Utility | 1 |
165-8778 Bucket Gp-Utility
| 13***86 | Edge Group-Cutting | 1 |
| 16***47 | Bucket As-Utility | 1 |
| 16***78 | Bucket Group-Utility | 1 |
242-9998 Carriage & Fork Ar
| 14***11 | Carriage As-Fork | 1 |
| 15***35 | Plate-Instruction; (Load Capacity) | 1 |
| 16***89 | Tack-Fastener | 4 |
293-9428 Carriage & Fork Ar
| 19***42 | Fork Group-Pallet | 2 |
| 26***81 | Carriage Group-Fork | 1 |
| 29***28 | Carriage & Fork Ar | 1 |
293-9427 Carriage & Fork Ar
| 19***43 | Fork Group-Pallet | 2 |
| 26***81 | Carriage Group-Fork | 1 |
| 29***27 | Carriage & Fork Ar | 1 |
243-0000 Carriage & Fork Ar
| 14***11 | Carriage As-Fork | 1 |
| 15***35 | Plate-Instruction; (Load Capacity) | 1 |
| 16***89 | Tack-Fastener | 4 |
293-9429 Carriage & Fork Ar
| 19***45 | Fork Group-Pallet | 2 |
| 26***81 | Carriage Group-Fork | 1 |
| 29***29 | Carriage & Fork Ar | 1 |
242-9999 Carriage & Fork Ar
| 14***11 | Carriage As-Fork | 1 |
| 15***35 | Plate-Instruction; (Load Capacity) | 1 |
| 16***89 | Tack-Fastener | 4 |
149-1411 Carriage As-Fork
| 14***11 | Carriage As-Fork | 1 |
261-6681 Carriage Gp-Fork
| 15***35 | Plate-Instruction; (Load Capacity) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 25***95 | Step As | 1 |
154-5053 Clam As-Multipurpose Bucket
| 14***05 | Bearing-Sleeve | 4 |
| 14***36 | Edge | 1 |
| 15***53 | Clam As-Multipurpose Bucket | 1 |
154-5070 Clam As-Multipurpose Bucket
| 14***05 | Bearing-Sleeve | 4 |
| 14***37 | Edge | 1 |
| 15***70 | Clam As-Multipurpose Bucket | 1 |
149-4232 Clam As-Multipurpose Bucket
| 14***05 | Bearing-Sleeve | 4 |
| 14***32 | Clam As-Multipurpose Bucket | 1 |
| 14***35 | Edge | 1 |
199-8308 Clam As-Multipurpose Bucket
| 14***05 | Bearing-Sleeve | 4 |
| 15***38 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
| 16***30 | Plate-Identification; (Cat) | 2 |
219-4355 Conversion Ar-Quick Coupler
| 19***40 | Cylinder Group-Hydraulic; -Coupler | 2 |
| 19***54 | Pin-Spring | 2 |
| 20***55 | Valve & Lines Group-Coupler | 1 |
234-0777 Conversion Ar-Quick Coupler
| 19***40 | Cylinder Group-Hydraulic; -Coupler | 2 |
| 19***54 | Pin-Spring | 2 |
| 20***85 | Pin | 2 |
296-0582 Conversion Gp-Work Tool -Kit, High Flow
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
234-0771 Coupler Gp-Quick
| 19***55 | Coupler Group-Quick; -Hydraulic | 1 |
| 21***20 | Wiring Group-Quick Coupler | 1 |
| 23***71 | Coupler Group-Quick | 1 |
196-8870 Coupler Gp-Quick
| 11***83 | Boss; (M10x1.5-Thd) | 6 |
| 12***01 | Plate-Retainer | 2 |
| 13***79 | Washer; (11x32x3-mm Thk) | 2 |
192-2655 Coupler Gp-Quick
| 19***55 | Coupler Group-Quick; -Hydraulic | 1 |
| 19***75 | Coupler As | 1 |
| 20***85 | Pin | 2 |
162-5236 Cover Gp-Lines
| 16***28 | Plate | 1 |
| 16***36 | Cover Group-Lines | 1 |
| 5C***53 | Bolt (M6x1.00x16mm); (M6x1x16mm Thk) | 5 |
215-3963 Cylinder & Link Gp-Coupler -Rh
| 19***40 | Cylinder Group-Hydraulic; -Coupler | 1 |
| 19***42 | Pin | 1 |
| 21***57 | Link Group-Coupler | 1 |
215-3962 Cylinder & Link Gp-Coupler -Lh
| 19***40 | Cylinder Group-Hydraulic; -Coupler | 1 |
| 19***42 | Pin | 1 |
| 21***57 | Link Group-Coupler | 1 |
135-9383 Edge Gp-Cutting
| 13***83 | Edge Group-Cutting | 1 |
| 13***93 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 6 |
135-9386 Edge Gp-Cutting
| 13***86 | Edge Group-Cutting | 1 |
| 13***96 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 11 |
135-9384 Edge Gp-Cutting
| 13***84 | Edge Group-Cutting | 1 |
| 13***94 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 8 |
195-7124 Edge Gp-Cutting
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 11 |
| 19***24 | Edge-Cutting | 1 |
| 19***24 | Edge Group-Cutting | 1 |
135-9387 Edge Gp-Cutting
| 13***87 | Edge Group-Cutting | 1 |
| 13***97 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 11 |
135-9385 Edge Gp-Cutting
| 13***85 | Edge Group-Cutting | 1 |
| 13***95 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 8 |
279-5360 Fork Ar-Grapple -Industrial
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***14 | Fork Group-Grapple; -Industrial | 2 |
| 27***75 | Cylinder Group-Grapple; -Industrial | 2 |
285-6115 Fork Ar-Grapple -Utility
| 28***10 | Fork Group-Grapple | 1 |
| 28***15 | Fork Ar-Grapple; -Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
285-6114 Fork Ar-Grapple -Utility
| 28***05 | Fork Group-Utility | 1 |
| 28***14 | Fork Ar-Grapple; -Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
279-5350 Fork Ar-Grapple -Industrial
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***14 | Fork Group-Grapple; -Industrial | 9 |
| 27***75 | Cylinder Group-Grapple; -Industrial | 2 |
164-9614 Fork Gp-Grapple
| 16***54 | Tine | 1 |
| 16***14 | Fork Group-Grapple; -Industrial | 1 |
| 3E***70 | Pin; (Spring) | 1 |
285-6110 Fork Gp-Grapple
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 9 |
| 28***10 | Fork Group-Grapple | 1 |
279-5351 Fork Gp-Grapple -Industrial
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
243-0001 Fork Gp-Pallet -Kit
| 19***43 | Fork Group-Pallet | 12 |
| 22***29 | Positioner Group-Fork | 1 |
| 24***01 | Fork Group-Pallet; -Kit | 1 |
195-6943 Fork Gp-Pallet
| 19***43 | Fork Group-Pallet | 1 |
| 22***29 | Positioner Group-Fork | 1 |
243-0003 Fork Gp-Pallet -Kit
| 19***45 | Fork Group-Pallet | 12 |
| 22***29 | Positioner Group-Fork | 1 |
| 24***03 | Fork Group-Pallet; -Kit | 1 |
195-6942 Fork Gp-Pallet
| 19***42 | Fork Group-Pallet | 1 |
| 22***29 | Positioner Group-Fork | 1 |
195-8545 Fork Gp-Pallet
| 19***45 | Fork Group-Pallet | 1 |
| 22***29 | Positioner Group-Fork | 1 |
243-0002 Fork Gp-Pallet -Kit
| 19***42 | Fork Group-Pallet | 12 |
| 22***29 | Positioner Group-Fork | 1 |
| 24***02 | Fork Group-Pallet; -Kit | 1 |
165-8739 Fork Gp-Utility
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***39 | Fork Group-Utility | 1 |
165-8732 Fork Gp-Utility
| 16***32 | Fork Group-Utility | 1 |
| 16***41 | Tine | 1 |
| 9R***59 | Clip | 1 |
165-8737 Fork Gp-Utility
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 9 |
| 16***37 | Fork Group-Utility | 1 |
285-6105 Fork Gp-Utility
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 7 |
| 28***05 | Fork Group-Utility | 1 |
279-5358 Frame Gp-Fork -Industrial
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***89 | Tack-Fastener | 4 |
279-5352 Frame Gp-Fork -Industrial
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***89 | Tack-Fastener | 4 |
285-6116 Grapple & Cylinder Gp-Utility
| 16***31 | Mounting Group-Cylinder; -Utility | 1 |
| 16***40 | Grapple Group-Utility | 1 |
| 17***36 | Bolt; (M12x1.75x35-mm) | 4 |
165-8734 Grapple & Cylinder Gp-Utility
| 16***95 | Cylinder Group-Grapple | 1 |
| 16***31 | Mounting Group-Cylinder; -Utility | 1 |
| 16***33 | Lines Group-Grapple | 1 |
165-8740 Grapple Gp-Utility
| 15***11 | Pin | 4 |
| 15***35 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
| 16***40 | Grapple Group-Utility | 1 |
215-3960 Handle & Pin Gp-Coupler -Lh
| 16***60 | Pin-Spring | 1 |
| 19***42 | Pin | 1 |
| 21***58 | Handle Group-Coupler; -Lh | 1 |
215-3961 Handle & Pin Gp-Coupler -Rh
| 16***60 | Pin-Spring | 1 |
| 19***42 | Pin | 1 |
| 21***59 | Handle Group-Coupler; -Rh | 1 |
215-3958 Handle Gp-Coupler -Lh
| 19***37 | Plate | 1 |
| 19***54 | Pin-Spring | 2 |
| 21***58 | Handle Group-Coupler; -Lh | 1 |
215-3959 Handle Gp-Coupler -Rh
| 19***37 | Plate | 1 |
| 19***54 | Pin-Spring | 2 |
| 21***59 | Handle Group-Coupler; -Rh | 1 |
215-3957 Link Gp-Coupler
| 19***37 | Plate | 1 |
| 19***38 | Bracket | 1 |
| 19***45 | Spring | 1 |
161-7290 Pump Gp-Diaphragm
| 16***63 | Motor-Electric; (12-Volt) | 1 |
| 16***90 | Pump Group-Diaphragm; -Water Spray-Water | 1 |
| 17***33 | Head-Pump | 1 |
247-6742 Pump Gp-Diaphragm
| 16***63 | Motor-Electric; (12-Volt) | 1 |
| 24***42 | Pump Group-Diaphragm; -Water Spray | 1 |
| 24***23 | Head-Pump | 1 |
188-7733 Step Gp-Material Handling Arm
| 18***86 | Step As | 1 |
| 18***33 | Step Group-Material Handling Arm | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
173-7407 Stop Gp-Bucket -Utility
| 17***07 | Stop Group-Bucket; -Utility | 1 |
| 2S***08 | Washer-Retaining; (0.531x3.25x0.438-In Thk) | 2 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 1 |
116-2001 Strainer Gp-Water
| 11***01 | Strainer Group-Water | 1 |
| 11***14 | Screen; (Water Tank) | 1 |
| 11***15 | Gasket | 1 |
346-1834 Tank & Mtg Gp-Water -Kit
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 06***51 | Clamp | 2 |
| 09***12 | Clip | 2 |
252-0386 Tank & Mtg Gp-Water -Kit
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 06***51 | Clamp | 2 |
| 09***12 | Clip | 2 |
166-2551 Tank Gp-Water
| 16***51 | Tank Group-Water | 1 |
| 19***06 | Cap As; (Water Tank) | 1 |
| 19***07 | Fitting-Drain | 1 |
193-0451 Tank Gp-Water
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 09***12 | Clip | 2 |
| 11***27 | Screw-Machine; (M6x1x30-mm) | 4 |
141-4999 Tooth Gp-Uni
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 1 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
287 serial number reference
The PIN plate on a Cat 287 is riveted to the rear of the chassis, usually on the right-hand rear frame member near the tailgate/engine door, visible from outside the machine. The plate shows the full Product Identification Number; the first three characters are the letter prefix identifying the machine/model build series, followed by a running serial sequence (e.g. CNY00001 and up). Match the 3-letter prefix to the model family before reading the sequence number for build order or manual coverage.
| Prefix | Identifies | Notes |
|---|---|---|
| CNY | Base 287 Multi Terrain Loader (first generation, pre-B) | Serial range CNY00001-UP. Factory service literature and parts documentation for the base 287 are published under this prefix. Fitted with the Cat 3034 turbocharged diesel (also the engine covered in the combined 247/257/267/277/287 operation and maintenance manual). Early-to-mid 2000s production; the 287B (prefixes ZSA and MSH, Cat 3044C DIT engine) replaced it by around 2004-2005. Treat exact start/end production dates as approximate and confirm with dealer for a specific unit. |
Frequently asked questions
What engine does the Caterpillar 287 use?
The base Caterpillar 287 (no letter suffix) runs a Cat 3034T, a 4-cylinder turbocharged diesel rated at roughly 80 hp (60 kW) gross and 74 hp (55 kW) net. This is a smaller, distinct engine from the 287B's Cat 3044C DIT and the 287C's Cat C3.4 DIT — don't cross-apply specs between them.
What is the operating weight of the Caterpillar 287?
Operating weight runs roughly 4,470-4,660 kg (9,860-10,270 lbs). The figure varies by configuration and source, so confirm against the specific machine's data plate rather than a single published number.
What replaced the Caterpillar 287?
Caterpillar replaced the base 287 with the 287B in the mid-2000s, which stepped up to the larger 3044C DIT engine and, on that generation, added an optional high-flow hydraulic circuit. The lineage continued afterward through the 287C and 287D as Cat kept enlarging the multi-terrain loader platform.
What 287 owners discuss
One track loses drive while the boom and bucket keep working fine — what's the usual cause on a 287-series machine?
Field consensus points to a drive motor circuit fault rather than the main pump, since lift/tilt and auxiliary hydraulics run on separate circuits and stay normal. On 287B/287C machines the left- and right-hand drive motor speed sensor assemblies (each housing two sensors in one body) are a known weak point, throwing abnormal frequency or pulse-width fault codes and killing drive to that side. Before condemning a motor, check the sensor connector and harness for corrosion or chafing — that clears a good share of these faults on its own. Have your dealer confirm the diagnosis with a scan tool before replacing a drive motor.
The machine won't turn one direction, or won't drive at all, even though the boom and bucket work normally. What do owners check first?
Most reports trace this to the pilot control system ahead of the pump. The small pilot buttons under the joystick boot can stick and fail to release pilot pressure cleanly, and the joystick's own pilot control valve can fail outright — one repair thread put a dealer replacement at several hundred dollars. Check pilot pressure and inspect the buttons for sticking before assuming a drive motor or main pump problem. Because a machine that won't steer predictably is a safety issue, have your dealer verify pilot pressure and steering response before returning it to work.
What undercarriage wear pattern is typical for the 287 series?
The torsion-axle suspension gets consistent praise for ride quality, but the axle bushings are a recognized wear point — one early 287B owner found the tracks leaning inward toward the machine at around 500 hours, traced to worn bushings in the torflex axles. Bogie/roller bearings wear over time too, though owners describe replacement as straightforward. In clay or sandy ground, debris packs into the front roller set and accelerates wear if it isn't cleaned out regularly. Track sag should run around 12 mm (0.5 in) measured under load between the drive sprocket and idler — check it as part of routine service, and always jack the machine under the torsion axles, not elsewhere on the frame.
Does the engine change across the 287 model years, and does it matter for diagnostics?
Yes, and it matters a lot. The base 287 runs a Cat 3034T four-cylinder turbocharged diesel, rated roughly 80 hp gross / 74 hp net — a smaller, simpler engine than the 287B's Cat 3044C DIT or the 287C's Cat C3.4 DIT, both of which add more electronics and a fuller set of diagnostic fault codes. The 287D switched again to the Cat C3.3B DIT engine to meet Tier 4 Final emissions, with net output dropping to roughly 73 hp and a diesel particulate filter with active regeneration added, a system none of the earlier engines have. Because the base 287 predates the electro-hydraulic control system introduced on later series, expect it to rely on basic analog gauge warnings rather than a full digital fault code set.
What electrical or sensor issues come up most often in the field?
Drive motor speed sensor faults dominate the reports: left- and right-hand sensor assemblies throwing abnormal frequency or pulse-width codes, often traced back to a corroded or chafed harness connector rather than a bad sensor. On 287D machines, an out-of-range 8V DC sensor supply voltage is a recurring complaint that cascades into multiple speed and tilt-position fault codes at once — check the supply circuit itself before swapping sensors one by one. Separately, some 287C owners report no heat from the cab vents traced to the electric water valve for the heater core sticking closed, with the engine cooling system otherwise fine.
Any known quirks in the hydraulic lift/tilt or auxiliary circuit?
Some owners report boom-lift pressure reading well under the roughly 23 MPa (3,336 psi, plus or minus about 100 psi) factory spec — in one case closer to 14.5 MPa (2,100 psi) before the circuit cut out — usually traced to a relief valve or pump wear rather than the lift cylinder itself. Auxiliary or grapple circuits that open but won't close, with no pump noise and no response from the switch, point to a failed auxiliary solenoid, a bad relay, or a wiring fault at the joystick rather than the pump itself. Because a boom that won't hold position under a raised load is a safety issue, have your dealer verify hydraulic hold and relief pressures before working under a raised lift arm.
What should I check before buying a used 287-series machine?
Hours matter more than age — buyers favor machines under roughly 3,500 hours given a typical service life around 5,000 hours, and want to see maintenance records rather than just a clean paint job (fresh paint or welds can hide prior damage). Start the engine cold and listen for stalling or rough running, and check oil condition, coolant, and belt tightness. Cycle the boom and bucket and watch for drift or sink when you let go of the controls, which points to internal valve or cylinder wear rather than a quick fix. Walk the undercarriage for cracked or chunked track rubber, flat-spotted rollers, and the torsion-axle lean noted around the 500-hour mark on early units. If it's a 287D, ask specifically about DPF regeneration history and any recurring speed-sensor fault codes. Track and undercarriage components on this platform are proprietary and replacement cost runs into the thousands of dollars per side depending on wear and configuration, so factor that into your offer. Have your dealer run a full code check and pressure test before you finalize the purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 287 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.