Caterpillarforest productsforwarder
Caterpillar 2748
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 2748 is a track-mounted forest products log loader, a swing machine built to load, sort, and process logs at a landing or millyard rather than to travel long distances through standing timber. It is cataloged under Cat's forest products line and identified in factory parts records by the PIN prefix PCL, built around a Cat C7 industrial diesel, a turbocharged inline-six with a single turbocharger and dry exhaust manifold per the parts breakdown. A dual heavy-duty track undercarriage carries an upper structure with a swing bearing and swing drive, a boom offered in two arm-length options (roughly 7.8 m and 8.5 m), a hydraulic grapple, and a hydraulic rotator that spins the grapple independent of boom position. Cat does not publish operating weight, dimensions, or a production-year span for this model in any current spec channel, and the 2748 is not tied by any documented source to a named predecessor or successor; it sits alongside the 2948 as a shared C7-family forestry pairing rather than a mainstream catalog model.
Public documentation does not break the 2748 out into separate series or generations the way Cat tracks its mainstream excavators, so no source lists running changes across its production life. What is confirmed is a shared engine platform and cooling hardware with the 2948, pointing to a common parts and service base across that pairing rather than a standalone design. That scarcity of public spec data is itself the reason the 2748 matters in the used and parts market today: a buyer or shop cannot pull a spec sheet or decode a serial the way they can for a mainstream excavator, so correct identification runs through the PIN plate and the factory parts catalog rather than a memorized capacity table. For an active forestry operation, verified PIN lookup, dealer parts cross-reference, and machine-specific fluid and torque data carry more weight than a published brochure number, and a unit with clean service history holds real value on resale precisely because that history is hard to find anywhere else.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 2748 specifications
Engine
| Configuration | Turbocharged inline-6 diesel (confirmed from factory parts breakdown: single turbocharger, dry exhaust manifold, 6-cylinder head with 6 injector sleeves). Exact engine model, displacement, gross/net power, and emissions tier are not published in any available spec sheet for this machine. |
Weights
| Operating weight | Not documented in available spec sources — verify with your dealer. |
Dimensions
| Log loader arm | Offered with two boom-arm length options per factory parts breakdown, roughly 7.8 m and 8.5 m; transport length/width/height, track gauge, and ground clearance are not documented in available spec sources. |
Performance
| Configuration notes | Machine is a track-mounted forestry log loader/swing machine with dual heavy-duty track assemblies, a transmission and mounting group, a dozer-blade arrangement, hydraulic grapple, and hydraulic rotator, per the factory parts breakdown. Travel speed and other performance figures are not documented in available spec sources. |
Service capacities (summary)
| Capacities | Fuel tank, hydraulic system, engine oil, and cooling system capacities are not documented in available spec sources — verify with your dealer or the factory operation and maintenance manual. |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
2748 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) - Cat C7 diesel | Not published for the 2748 in any available spec sheet or dealer document. Verify the exact crankcase-with-filter fill against the machine's OMM or SIS before a service fill. | Cat DEO-ULS diesel engine oil (Cat DEO where ultra-low-sulfur fuel compliance is not required). Multigrade 15W-40 covers general ambient range; drop to Cat DEO Cold Weather 0W-40 or 10W-30 for sustained sub-freezing starts, per Cat's standard engine-oil viscosity-by-temperature guidance for C7-family engines. |
| Cooling system | Not published for the 2748 in any available spec sheet or dealer document. Verify with your dealer or the machine's OMM. | Cat ELC (Extended Life Coolant), factory premix or concentrate mixed to a 50/50 water/glycol ratio. Cat DEAC (Diesel Engine Antifreeze/Coolant) is the accepted non-ELC alternate where ELC service history cannot be confirmed. |
| Fuel tank | Not published for the 2748 in any available spec sheet or dealer document. Verify with your dealer or the machine's OMM. | Ultra-low-sulfur No. 2 diesel meeting ASTM D975 (or equivalent EN 590 diesel outside North America); biodiesel blends up to B20 are acceptable per Cat's general diesel-engine fuel guidance, provided the blend meets Cat's biodiesel fuel-quality specification. |
| Transmission / power train compartment | Not published for the 2748 in any available spec sheet or dealer document. Verify with your dealer or the machine's OMM. | Cat TDTO (Transmission/Drive Train Oil), SAE 30 for warm climates, SAE 10W for cold starts, or Cat TDTO-TMS multigrade where year-round ambient swing is wide. This is the standard fill for Cat powershift transmission and power-train compartments on C7-family forest products machines. |
| Final drives (each) | Not published for the 2748 in any available spec sheet or dealer document. Verify with your dealer or the machine's OMM; track machines of this class typically service each final drive as a separate compartment. | Cat TDTO, same grade selection as the power train compartment (SAE 10W for cold weather, SAE 30 for warm climates, or Cat TDTO-TMS multigrade). |
| Hydraulic system (total, including tank) | Not published for the 2748 in any available spec sheet or dealer document. Verify with your dealer or the machine's OMM. | Cat HYDO Advanced (SAE 10W, 20W, or 30 depending on ambient temperature) is Cat's preferred fill for machine hydraulic and grapple/rotator circuits. Cat BIO HYDO Advanced is the environmentally-preferred alternate. Use SAE 10W in cold climates, SAE 30 in hot climates, multigrade where the OMM calls for wide-range coverage. |
| Hydraulic tank (reservoir only) | Not published for the 2748 in any available spec sheet or dealer document. Verify with your dealer or the machine's OMM. | Same Cat HYDO Advanced / Cat BIO HYDO Advanced fill as the hydraulic system, viscosity selected by ambient temperature per the OMM's cold-weather/hot-weather chart. |
| Grease (spec only) - pins, bushings, boom, grapple and rotator pivots | Not applicable - grease points are serviced to fitting refusal, not by a fill volume. | Cat Advanced 3Moly Grease, NLGI 2, for general medium-load, medium-speed pivot points across an ambient range of roughly -20 to 40 C (-4 to 104 F). Cat Ultra 5Moly Grease is the upgrade choice for the highest-load pivots (grapple, rotator, boom heel) where extreme-pressure, moisture-resistant performance is wanted. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 2748 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the 2748 beyond the schedule
Predictive Maintenance & Fluid Analysis
Run S·O·S oil sampling on the C7 engine at every oil change; a rising iron trend is the earliest warning of HEUI pump thrust-bearing wear before it contaminates injectors. Sample coolant on the same cycle to catch water pump and thermostat issues shared across the 2748/2948/584 C7 family before they surface as an overheat event. Track undercarriage wear readings and swing bearing play with a dial indicator on a fixed schedule rather than waiting for a knock at swing start-stop.
Corrective & Common Repairs
Most field repairs on the 2748 trace to three areas: HEUI injectors following pump wear, weeping fuel rail fittings on early C7 builds, and blown grapple/rotator hoses from swinging a partially supported log. Check relief valve settings before assuming a valve or cylinder is bad. A hesitant or one-directional swing is often a stuck pilot shuttle valve, not the swing bearing itself. Chafed harness runs at boom and swing-frame pivots cause more phantom fault codes than actual sensor failures.
Overhaul & Rebuild Points
Swing bearing and swing drive wear is the costliest item owners defer; schedule a bolt-torque and bearing-play check well ahead of end-of-service-life rather than after a clunk develops. Sealed-and-lubricated undercarriage bushings hold up better than open designs under forestry pivot-turn duty and are the standard rebuild choice at mid-life. Overhaul the HEUI pump and injectors as a set once oil-sample iron trends confirm wear, rather than chasing one cylinder at a time.
Seasonal & Environment Servicing
Bark, needle, and dirt packing in the radiator and oil cooler fins accelerates overheating faster on the 2748 than on machines running a cleaner duty cycle; clean fins on a shortened interval through peak harvest season. Switch engine and hydraulic oil viscosity with the ambient swing (Cat DEO Cold Weather 0W-40 and Cat HYDO Advanced 10W for cold starts, heavier grades for sustained heat). Grease grapple and rotator pivots more often in wet, abrasive bark-yard conditions to protect seal life.
2748 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 112-6523 | Insert-Fuel Filter | Fuel system service | Check fitment → |
| 1R-0751 | Filter-Fuel | Fuel system service | Check fitment → |
| 220-8678 | Seal-Ring | Fuel system service | Check fitment → |
| 326-1644 | Filter As-Water Sep & Fuel | Fuel system service | Check fitment → |
| 338-2962 | Filter-Oil | Hydraulic service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
2748 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| E360 | Low engine oil pressure event, with warning, derate, and shutdown severity levels | Low oil level, worn or failing oil pump, plugged oil filter, or a faulty oil pressure sensor/circuit | Stop and check oil level and filter condition immediately; do not continue running once the shutdown level triggers |
| E361 | High engine coolant temperature event, with warning, derate, and shutdown levels (roughly 108C warning / 111C derate-shutdown on the C7) | Low coolant level, blocked radiator core, slipping or failed fan drive, or a faulty coolant temperature sensor | Check coolant level and radiator for debris, verify fan operation, reduce load and let engine cool before restarting |
| E362 | Engine overspeed event, warning and shutdown levels around 2600 rpm default | Hydraulic pump or driveline overrunning the engine (e.g. downhill travel), throttle linkage or governor fault | Reduce throttle/load immediately, inspect governor and linkage if the event recurs without an obvious operating cause |
| E198 | Low fuel pressure event, warning and derate levels | Clogged primary or secondary fuel filter, air entrainment in the fuel system, or a weak fuel transfer pump | Check and replace fuel filters, inspect fuel lines and priming pump for leaks or air ingress |
| E2143 | Low engine coolant level event | Coolant leak in the cooling system, or a faulty coolant level sensor/float | Visually inspect for leaks, top up coolant to the correct level, and verify the level sensor if the code persists after topping up |
| 34 | Loss of engine speed/timing signal (flash/diagnostic code, not an event code) | Failed primary engine speed/timing sensor or damaged wiring/connector at the sensor | Inspect the speed/timing sensor and its wiring harness for damage, corrosion, or a loose connector |
| 24 | Engine oil pressure sensor circuit fault (open or short) | Damaged sensor, chafed wiring, or a corroded connector at the oil pressure sensor | Check sensor wiring and connector for damage or corrosion, test sensor per the engine service manual before replacing |
| 51 | Intermittent battery power supply to the ECM | Loose or corroded battery cable connections, faulty ECM power relay, or chafed main harness wiring | Check battery terminals and main power/ground connections at the ECM, clean and retorque before further diagnosis |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
2748 attachments & work tools
Model not verifiable
No Caterpillar dealer page, factory spec sheet, attachment guide, or equipment database lists a forest products machine designated "2748." Current Cat forest machine lines run FM528/538/548/558/568 (swing machines, general forestry/log loader configs) and separate forwarder/harvester/skidder series; none carry a 2748 designation.
Only trace of "2748" found
The single occurrence found ties "2748" to an aftermarket water-pump cross-reference listing alongside "2948" and "584," mixed in with other numeric codes. This reads as a parts cross-reference artifact, not confirmation of a distinct machine model, and cannot be used to infer attachment or work-tool compatibility.
Recommendation
Verify the exact model designation from the machine's serial/PIN plate before sourcing attachments. If the machine is actually a Cat forest products swing machine or log loader (e.g., an FM5xx series or a legacy 200-series unit), attachment guides for that confirmed model should be pulled instead — grapple, delimber, and saw head compatibility, coupler type, and hydraulic kit requirements are all model-specific and cannot be assumed from an unverified designation.
All 2748 assemblies by section
Every catalogued assembly group for the Caterpillar 2748. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
333-8330 Air Cleaner Gp
| 11***38 | Bracket-Mounting | 2 |
| 17***02 | Clamp | 1 |
| 20***90 | Clamp As-Band; (T-Bolt) | 2 |
338-2889 Air Cleaner Gp
| 06***70 | Cap | 1 |
| 13***28 | Cover As | 1 |
| 13***29 | Valve-Dust; (Air Cleaner) | 1 |
153-1794 Cover Gp-Air Inlet
| 15***94 | Cover Group-Air Inlet; -Engine | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 20***69 | Cover-Air Inlet | 1 |
137-5182 Elbow Gp-Air Inlet
333-8580 Lines Gp-Air
| 20***35 | Hose | 1 |
| 20***78 | Clamp-Tbolt | 6 |
| 25***33 | Clamp | 2 |
183-6845 Manifold Gp-Exhaust -Dry
| 17***98 | Bolt-Flange Head; (M10x1.5-Thd) | 8 |
| 18***45 | Manifold Group-Exhaust; -Dry | 1 |
| 18***54 | Manifold-Exhaust; (Center) | 1 |
333-8540 Muffler Gp
| 1W***31 | Clamp-Band; -Turbo Exhaust-Exhaust | 1 |
| 20***26 | Clamp | 1 |
| 24***64 | Clamp-Muffler | 2 |
151-0864 Plug Gp-Air Inlet Manifold
| 15***64 | Plug Group-Air Inlet Manifold | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 9S***05 | Plug-O-Ring; (Straight Thread O-Ring) | 1 |
325-3756 Turbocharger Gp
| 25***98 | Turbocharger Group | 1 |
| 32***56 | Turbocharger Group | 1 |
| 3E***17 | Locknut; (M10x1.5-Thd)(Spiralock) | 4 |
250-7698 Turbocharger Gp
| 13***02 | Clamp As; (Turbine)(Turbine) | 1 |
| 15***72 | Clamp As; (Compressor) | 1 |
| 24***60 | Hose; (63-cm)(Wastegate) | 0 |
Basic Engine
238-4738 Belt Tensioner Gp
| 22***09 | Belt Tensioner | 1 |
| 23***38 | Belt Tensioner Group | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
212-4289 Camshaft Gp
| 10***94 | Plate-Thrust | 1 |
| 1B***05 | Key; (Woodruff) | 1 |
| 21***88 | Camshaft As | 1 |
4w-3462 Carrier Gp-Seal
| 23***83 | Gasket | 1 |
| 24***76 | Seal | 1 |
| 2W***46 | Cover | 1 |
229-8841 Cover Gp-Cylinder Block
| 11***18 | Bolt As; (M8x1.25x16-mm) | 4 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 21***21 | Stud; (M8x1.25-Thd) | 1 |
211-9120 Cover Gp-Front Housing
| 12***57 | Washer; (10.85x19.3x1.27-mm Thk) | 2 |
| 13***22 | Stud | 2 |
| 16***76 | Cover As-Front | 1 |
172-8732 Cover Gp-Front Housing
| 06***55 | Seal-O-Ring (Id=47.22mm) | 1 |
| 17***32 | Cover Group-Front Housing | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 2 |
261-3721 Cover Gp-Valve Mechanism
| 09***49 | Bolt; (M8x1.25x40-mm) | 13 |
| 26***21 | Cover Group-Valve Mechanism | 1 |
| 27***88 | Seal-Valve Cover; (Valve Mechanism Base) | 1 |
210-5590 Crankshaft Gp
| 10***08 | Bearing-Main; (Standard) | 6 |
| 14***62 | Bearing; (0.25mm Undersize) | 0 |
| 14***64 | Bearing; (0.5mm Undersize) | 0 |
305-8141 Cylinder Block Gp
| 10***04 | Sleeve-Cylinder | 0 |
| 21***86 | Bearing-Sleeve; (Camshaft) | 1 |
| 26***74 | Cylinder Block Group | 1 |
263-3774 Cylinder Block Gp
| 26***74 | Cylinder Block Group | 1 |
| 5P***47 | Washer (Bracket To Valve Support) | 14 |
| 7E***68 | Cap-Crankshaft Bearing | 7 |
221-4482 Cylinder Block Gp
| 1W***07 | Sleeve | 2 |
| 22***82 | Cylinder Block Group | 1 |
| 30***41 | Cylinder Block Group | 1 |
314-4184 Cylinder Head As
| 22***00 | Sleeve-Injector | 6 |
| 23***85 | Insert-Valve Seat; (Standard)(Exhaust) | 6 |
| 26***57 | Insert-Valve Seat; (Standard)(Inlet) | 12 |
219-5847 Cylinder Head Gp
| 1N***99 | Plug-O-Ring; (Straight Thread) | 2 |
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
| 21***47 | Cylinder Head Group | 1 |
300-9550 Cylinder Head Gp
| 13***83 | Retainer-Spring | 6 |
| 13***15 | Seat-Valve Spring | 6 |
| 13***18 | Spring-Valve; (Exhaust) | 6 |
219-5849 Cylinder Head Gp
| 13***95 | Gasket-Cylinder Head | 1 |
| 13***52 | Bolt-12 Point Head; (M20x2.5x170mm) | 1 |
| 14***89 | Fastener Group-Cylinder Head | 14 |
241-4101 Damper Gp
| 16***21 | Damper Assem. | 1 |
| 22***21 | Spacer; (101.5x167x8-mm Thk) | 1 |
| 24***01 | Damper Group | 1 |
333-8327 Drain Gp-Engine Oil
| 14***11 | Plug Group | 1 |
| 23***80 | Seal-O-Ring | 1 |
| 30***15 | Adapter As | 1 |
7c-4566 Drain Gp-Engine Oil
| 11***19 | Plug-Magnetic; (Engine Oil Pan Drain) | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 7C***66 | Drain Group-Oil Pan; -Magnetic Plug | 1 |
258-8723 Fastener Gp-Cylinder Head
| 22***44 | Clip | 3 |
| 24***00 | Spring | 11 |
| 25***23 | Fastener Group-Cylinder Head; -Valve Cover Base | 1 |
213-1630 Fastener Gp-Front Cover
| 21***30 | Fastener Group-Front Cover | 1 |
| 6V***17 | Bolt; (M8x1.25x30-mm)(Location Z) | 12 |
| 8T***00 | Bolt (M8x1.25x60mm); (M8x1.25x60-mm) | 2 |
116-4556 Fastener Gp-Front Housing
| 11***56 | Fastener Group-Front Housing; (Housing) | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 6 |
| 6V***36 | Bolt; (M12x1.75x70-mm) | 6 |
113-6170 Fastener Gp-Lifting -Engine, Rear
| 11***70 | Fastener Group-Lifting; -Engine, Rear | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 3 |
| 8T***36 | Capscrew; (Hex Hd) (M10 X 1.50 X 25l Gr 10.9) | 3 |
273-2716 Flywheel Gp
| 1W***64 | Gear-Flywheel Ring; (126-Teeth) | 1 |
| 20***82 | Flywheel As | 1 |
| 27***16 | Flywheel Group | 1 |
205-1321 Gear Gp-Front
| 11***69 | Plate-Thrust | 1 |
| 11***72 | Bearing | 1 |
| 11***19 | Plate-Retaining | 1 |
132-2106 Housing Gp-Flywheel
| 13***06 | Housing Group-Flywheel | 1 |
| 6V***42 | Bolt (M10x1.50x40mm) | 2 |
| 7C***33 | Housing-Flywheel | 1 |
165-4446 Housing Gp-Front
| 16***46 | Housing Group-Front | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
| 24***59 | Housing-Front | 1 |
139-4081 Lifter Gp-Valve -Mechanism
| 13***81 | Lifter Group-Valve; -Mechanism | 1 |
| 13***84 | Spacer; (15.9x24x6-mm Thk) | 2 |
| 13***76 | Shaft As-Lifter | 1 |
153-5417 Lifting Gp-Engine
| 15***17 | Lifting Group-Engine | 1 |
| 15***96 | Plate-Lifting; (Rear) | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
239-5924 Manifold Gp-Cylinder Block
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 3 |
| 22***96 | Manifold-Oil; (Engine) | 1 |
| 23***24 | Manifold Group-Cylinder Block | 1 |
333-3850 Mounting Gp-Engine
| 18***83 | Nut-Hex Flange; (M12x1.75-Thd) | 6 |
| 20***95 | Spacer; (15x25x5-mm Thk) | 8 |
| 33***50 | Mounting Group-Engine | 1 |
152-5013 Mounting Gp-Fan Drive
| 15***13 | Mounting Group-Fan Drive | 1 |
| 25***23 | Support As; (Fan) | 1 |
| 7E***13 | Bracket | 1 |
317-5412 Mounting Gp-Refrigerant Compr
| 12***40 | Support-Alternator | 1 |
| 21***01 | Sleeve; (Split) | 2 |
| 24***59 | Support | 1 |
126-5931 Pan Gp-Oil -Engine
| 12***31 | Pan Group-Oil; -Engine | 1 |
| 14***09 | Plug As-Sto | 2 |
| 16***77 | Plug As | 1 |
212-3652 Piston & Rod Gp
| 19***53 | Ring-Piston; (Intermediate) | 1 |
| 19***71 | Pin-Piston | 1 |
| 19***72 | Retainer-Pin | 2 |
159-0303 Plug Gp-Cylinder Block
| 15***03 | Plug Group-Cylinder Block; (Cylinder Block) | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 2 |
| 6F***62 | Washer,Flat Transmission Oil Cooler | 1 |
162-8068 Plug Gp-Engine -Oil Gallery
| 14***95 | Plug As | 1 |
| 16***68 | Plug Group-Engine; -Oil Gallery | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
280-6846 Plug Gp-Engine -Engine Oil
| 18***63 | Plug Group | 1 |
| 28***46 | Plug Group-Engine; -Engine Oil | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
121-0802 Plug Gp-Flywheel Housing
| 12***02 | Plug Group-Flywheel Housing | 1 |
| 2P***94 | Plug-Sealing | 1 |
217-8985 Pulley Gp-Crankshaft
| 21***85 | Pulley Group-Crankshaft | 1 |
| 21***94 | Pulley; (8-Groove) | 1 |
| 2W***81 | Plate-Clamp; (Pulley Clamp) | 1 |
253-9319 Pulley Gp-Idler
| 15***00 | Bolt; (M10x1.5x54.25-mm) | 1 |
| 16***58 | Cover; (Dust) | 1 |
| 17***98 | Pulley As-Idler; (8-Groove) | 1 |
256-3834 Rocker Arm Gp -Inlet
| 25***34 | Rocker Arm Group; -Inlet | 1 |
| 25***35 | Rocker Arm As; (Inlet) | 1 |
| 26***24 | Screw-Valve Adjustment; (M10x1.5-Thd) | 1 |
256-3831 Rocker Arm Gp -Exhaust
| 25***31 | Rocker Arm Group; -Exhaust | 1 |
| 25***32 | Rocker Arm As; (Exhaust) | 1 |
| 26***24 | Screw-Valve Adjustment; (M10x1.5-Thd) | 1 |
122-8929 Seal Gp-Crankshaft
| 12***29 | Seal Group-Crankshaft | 1 |
| 24***39 | Seal-Crankshaft; (Front)(Front) | 1 |
| 7C***71 | Seal Group-Crankshaft; (Rear)(Rear) | 1 |
256-3830 Valve Mechanism Gp
| 13***17 | Spring | 5 |
| 13***98 | Shaft Assem. | 1 |
| 13***02 | Stand; (End) | 1 |
232-3717 Valve Mechanism Gp
| 13***81 | Lifter Group-Valve; -Mechanism | 3 |
| 21***09 | Bridge-Valve | 6 |
| 23***54 | Clip | 1 |
Cooling System
338-2935 Cooler Gp
| 18***43 | Locknut; (M10x1.5-Thd) | 20 |
| 28***94 | Adapter | 2 |
| 2P***73 | Cock-Drain; (Water Separator) | 1 |
117-3643 Cooler Gp-Engine Oil
| 11***43 | Cooler Group-Engine Oil | 1 |
| 23***55 | Gasket | 1 |
| 26***43 | Core As-Engine Oil Cooler | 1 |
200-1213 Elbow Gp-Water
| 19***86 | Elbow; (Inlet) | 1 |
| 20***13 | Elbow Group-Water; -Water Pump | 1 |
| 20***58 | Gasket | 1 |
333-8550 Fan Gp-Suction
| 15***83 | Washer-Hard; (8.4x35x2.5-mm Thk) | 8 |
| 33***50 | Fan Group-Suction | 1 |
| 33***47 | Fan; (9-Blade) | 1 |
208-2846 Lines Gp-Water
| 11***23 | Regulator-Water Temperature; (97-Deg C)(Coolant) | 2 |
| 12***66 | Gasket | 1 |
| 13***30 | Housing-Water Regulator | 1 |
208-2848 Plug Gp-Water Lines
| 20***48 | Plug Group-Water Lines | 1 |
| 7W***92 | Plug-Pipe; (1/2-14 Nptf Thd)(Use Without Air Compressor) | 1 |
227-4299 Pump Gp-Water -Coolant
| 14***88 | Seal As; (Water Pump) | 1 |
| 17***52 | Shaft As | 1 |
| 17***58 | Plug | 1 |
209-4600 Pump Gp-Water -Coolant
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 1 |
| 14***09 | Plug As-Sto | 1 |
| 14***11 | Plug Group | 1 |
333-3775 Radiator Gp
| 10***29 | Hose; (60-cm) | 0 |
| 15***83 | Washer-Hard; (8.4x35x2.5-mm Thk) | 18 |
| 17***94 | Bolt; (M8x1.25x16-mm) | 1 |
338-3155 Tank Gp-Expansion
| 33***55 | Tank Group-Expansion | 1 |
| 35***86 | Hose; (Vent) | 1 |
| 35***87 | Hose | 2 |
Electrical And Starting System
333-8420 Alternator Gp-Charging
| 12***58 | Pulley-Alternator; (8-Groove) | 1 |
| 21***22 | Belt-Serpentine | 1 |
| 33***20 | Alternator Group-Charging | 1 |
333-3898 Battery & Wiring Gp
| 15***20 | Battery; (12-Volt)(12-Volt) | 2 |
| 16***82 | Switch As-Disconnect | 1 |
| 1M***19 | Bolt; (5/16-18x1.375-In)(5/16-18x1.375 In) | 1 |
241-7602 Control & Mtg Gp-Engine Elek
| 10***28 | Spacer-Special; (12.7x26x28.7-mm Thk) | 4 |
| 13***00 | Clip; (Tab) | 1 |
| 14***92 | Stud; (M8x1.25-Thd) | 4 |
333-3888 Electrical Ar
| 33***70 | Wiring Group-Rear | 1 |
| 33***80 | Wiring Group-Front | 1 |
| 33***88 | Electrical Ar | 1 |
142-8333 Fastener Gp-Ground Stud
| 14***33 | Fastener Group-Ground Stud | 1 |
| 5P***70 | Nut-Hard; (M8 X 1.25) | 1 |
| 6V***64 | Washer-Hard; (8.8x25.5x5-mm Thk) | 1 |
345-0807 Heater Gp-Jacket Water
| 34***07 | Heater Group-Jacket Water | 1 |
| 35***04 | Timer; (24-Volt) | 1 |
223-9664 Lamp Gp-Flood
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***82 | Screw; (7.4x20-mm) | 2 |
| 16***56 | Bracket; (Lamp Retaining) | 1 |
219-6485 Lamp Gp-Flood
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 17***91 | Bracket Assem. | 1 |
| 17***92 | Body Assem. | 1 |
319-7380 Lamp Gp-Flood -Hid
| 22***74 | Bezel; (Hid) | 1 |
| 29***60 | Lamp; (24-Volt, Hid) | 1 |
| 29***43 | Lens | 1 |
333-3808 Lighting Gp-Flood
| 17***36 | Nut-Hex Flange; (M8x1.25-Thd)(M8x1.25) | 13 |
| 31***80 | Lamp Group-Flood; -Hid | 10 |
| 33***08 | Lighting Group-Flood | 1 |
333-3803 Lighting Gp-Flood
| 17***36 | Nut-Hex Flange; (M8x1.25-Thd)(M8x1.25) | 13 |
| 21***85 | Lamp Group-Flood; -24-Volt-Front | 2 |
| 22***64 | Lamp Group-Flood | 8 |
344-0035 Panel Gp-Circuit Breaker
| 34***35 | Panel Group-Circuit Breaker | 1 |
338-2891 Panel Gp-Circuit Breaker
| 33***91 | Panel Group-Circuit Breaker | 1 |
333-3848 Preheater Gp-Machine
| 03***31 | Elbow-To Tube As | 1 |
| 12***49 | Lockwasher | 1 |
| 18***14 | Nut; (1-11/16-18-Thd) | 1 |
333-3823 Preheater Gp-Machine
| 03***31 | Elbow-To Tube As | 5 |
| 06***55 | Elbow | 1 |
| 10***73 | Clip | 1 |
352-1490 Sensor Gp-Engine
| 16***61 | Plug As | 1 |
| 18***06 | Plug As; (High Temperature) | 1 |
| 18***63 | Plug Group | 1 |
266-8650 Sensor Gp-Pressure
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
| 26***50 | Sensor Group-Pressure; -Intake Manifold Air | 1 |
| 27***93 | Sensor Group-Pressure; (Water Jacket Outlet) | 1 |
239-2396 Sensor Gp-Pressure
| 19***25 | Sensor Group-Pressure; -Engine Oil | 1 |
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
| 23***96 | Sensor Group-Pressure; -Engine Oil, Fuel | 1 |
276-9067 Sensor Gp-Pressure
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
| 23***27 | Plug As-Connector; (3-Pin) | 1 |
| 27***19 | Sensor Group-Pressure; (Engine Block Oil Inlet) | 1 |
303-3357 Sensor Gp-Pressure
| 29***60 | Sensor Group-Pressure | 1 |
| 30***57 | Sensor Group-Pressure; -Atmospheric, . Spring | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 1 |
194-6725 Sensor Gp-Pressure
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
| 19***25 | Sensor Group-Pressure; -Engine Oil | 1 |
267-1402 Sensor Gp-Pressure
| 21***67 | Seal-O-Ring | 1 |
| 24***69 | Sensor Group-Pressure | 1 |
| 26***02 | Sensor Group-Pressure; -Injection Actuation | 1 |
236-6221 Sensor Gp-Speed -Engine Timing
| 23***21 | Sensor Group-Speed; -Engine Timing | 1 |
| 24***30 | Sensor Group-Speed; -Engine Timing | 1 |
| 3P***47 | Seal-O-Ring (Id=13.94mm); (13.949mm Id) | 2 |
234-5012 Sensor Gp-Temperature
| 23***12 | Sensor Group-Temperature; -Coolant, Water | 1 |
| 25***53 | Sensor As-Temperature; (Torque Converter Outlet Oil) | 1 |
| 6V***09 | Seal-O-Ring (Id=16.36mm); (16.36-mm Id) | 1 |
234-5013 Sensor Gp-Temperature
118-7284 Starting Aid Gp -Air Inlet Heater
| 11***84 | Starting Aid Group; -Air Inlet Heater | 1 |
| 15***37 | Heater As-Air Inlet; (22-Volt, 1892-Watt)(Starting Aid) | 1 |
| 1U***46 | Sealant (For Locations A) | 0 |
207-1541 Starting Motor Gp-Electric
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 10***02 | Housing As | 1 |
| 20***41 | Starting Motor Group-Electric | 1 |
132-1418 Starting Motor Gp-Electric
| 10***08 | Bolt (M10x1.5x35mm); (M10x1.5x35-mm) | 3 |
| 13***18 | Starting Motor Group-Electric | 1 |
| 13***30 | Wire As | 1 |
172-8660 Switch Gp-Liquid Level
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***60 | Switch Group-Liquid Level; -Rear Engine Oil-Ster, Hydraulic Fan Oil-Engine On-Steering Oil, Engine Off-Auxiliary Coolant-Front Engine Oil-Brake Oil, Hoist-Engine Coolant-Tc Oil-Low, Cold | 1 |
| 9X***01 | Pin-Connector; (16-Ga To 18-Ga)(Throttle Position Sensor) | 2 |
209-5582 Switch Gp-Magnetic
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 20***82 | Switch Group-Magnetic; -Starting Aid Heater Relay-Air Inlet Heater Relay | 1 |
| 3F***56 | Lockwasher; (8.43x15.5x0.76mm Thk) | 2 |
298-3802 Switch Gp-Push Button
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 10***07 | Switch-Operator; (Secondary Stop Push Button) | 1 |
| 11***14 | End-Wire; (18-Ga) | 8 |
342-9299 Wiring Gp-Cab
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***07 | Screw-Hex Socket; (M4x0.7x20-mm) | 8 |
| 15***79 | Nut; (U-Type Retainer) | 8 |
333-7804 Wiring Gp-Cab
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***87 | Start Switch Assembly; (Key)(Engine) | 1 |
| 11***11 | Socket-Auxiliary Power; (12-Volt)(Power Port) | 2 |
352-3581 Wiring Gp-Engine
| 10***20 | Plug As-Connector; (2-Pin) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
333-8590 Wiring Gp-Engine
| 17***36 | Nut-Hex Flange; (M8x1.25-Thd)(M8x1.25) | 4 |
| 17***20 | Strap-Dual Clamp | 2 |
| 18***43 | Locknut; (M10x1.5-Thd) | 1 |
333-3880 Wiring Gp-Front
| 06***45 | Clip | 1 |
| 15***50 | Cable; (00-Ga, Black)(183-cm Each) | 0 |
| 18***34 | Spacer; (0.438x1x0.5-In Thk) | 1 |
283-7992 Wiring Gp-Heater -Air Inlet Manifold
| 03***12 | Terminal-Ring; (2-Ga, 1/4-In Screw)(Circuit Breaker) | 1 |
| 13***43 | Boot; (Red)(Red) | 2 |
| 19***06 | Strap-Grounding | 1 |
333-3902 Wiring Gp-Horn
| 33***02 | Wiring Group-Horn | 1 |
| 33***92 | Horn As; (24-Volt, Two Tone) | 1 |
| 33***91 | Harness As-Wiring; (Firewall) | 1 |
333-3905 Wiring Gp-Hydraulic Tank
| 17***20 | Strap-Dual Clamp | 1 |
| 18***82 | Screw-Pan Head; (M6x1x16-mm) | 2 |
| 22***89 | Plug; (Rocker Switch)(Rocker Switch) | 1 |
333-3870 Wiring Gp-Rear
| 12***85 | Plug As-Connector; (1-Pin) | 1 |
| 12***86 | Receptacle As-Connector; (1-Pin) | 1 |
| 17***36 | Nut-Hex Flange; (M8x1.25-Thd)(M8x1.25) | 1 |
Engine Arrangement
329-5698 Engine Ar-Complete
| 11***70 | Fastener Group-Lifting; -Engine, Rear | 1 |
| 11***56 | Fastener Group-Front Housing; (Housing) | 1 |
| 11***10 | Cover Group-Fuel Filter Base | 1 |
331-9851 Engine Ar-Core
| 11***43 | Cooler Group-Engine Oil | 1 |
| 16***46 | Housing Group-Front | 1 |
| 19***61 | Lines Group-Injector Hydraulic Pump | 1 |
333-3749 Installation Ar-Engine
| 33***35 | Compressor & Mtg Group-Refrig | 1 |
| 33***49 | Installation Ar-Engine | 1 |
| 33***50 | Mounting Group-Engine | 1 |
Frame And Body
333-3796 Bunk Ar -Standard
| 33***96 | Bunk Ar; -Standard | 1 |
| 33***56 | Gate Group | 1 |
| 33***81 | Bunk Group; -Standard | 4 |
333-3797 Bunk Ar -Wide
| 33***97 | Bunk Ar; -Wide | 1 |
| 33***56 | Gate Group | 1 |
| 33***81 | Bunk Group; -Wide | 4 |
333-7781 Bunk Gp -Standard
| 33***81 | Bunk Group; -Standard | 1 |
| 34***72 | Bunk As | 1 |
| 34***68 | Tube | 2 |
333-8281 Bunk Gp -Wide
| 33***81 | Bunk Group; -Wide | 1 |
| 34***72 | Bunk As | 1 |
| 34***73 | Bunk As; (Extension) | 2 |
333-3753 Frame Gp-Front -Without Blade
| 33***53 | Frame Group-Front; -Without Blade | 1 |
| 33***41 | Frame As; (Engine End) | 1 |
333-3752 Frame Gp-Front
| 33***52 | Frame Group-Front | 1 |
| 33***39 | Frame As-Front; (Blade) | 1 |
333-3787 Frame Gp-Rear
| 33***53 | Frame Group-Front; -Without Blade | 1 |
| 33***87 | Frame Group-Rear | 1 |
| 33***35 | Valve & Mtg Group-Steering | 1 |
333-3758 Frame Gp-Rear
| 33***58 | Frame Group-Rear | 1 |
| 33***36 | Frame As | 1 |
| 33***46 | Frame As; (Extension) | 1 |
333-3901 Guard Gp-Axle -6wd
| 20***10 | Bolt-Flange Head | 12 |
| 33***01 | Guard Group-Axle; -6wd | 1 |
| 34***17 | Bolt-Flange Head; (M16x2x40-mm) | 4 |
333-3900 Guard Gp-Bottom -8wd
| 33***00 | Guard Group-Bottom; -8wd | 1 |
| 33***99 | Guard; (Front Axle) | 1 |
| 34***17 | Bolt-Flange Head; (M16x2x40-mm) | 4 |
357-9648 Guard Gp-Bottom
| 34***15 | Bolt-Flange Head; (M12x1.75x25-mm) | 18 |
| 34***10 | Plate | 1 |
| 35***96 | Guard As | 1 |
338-3000 Guard Gp-Bottom
| 33***00 | Guard Group-Bottom | 1 |
| 34***15 | Bolt-Flange Head; (M12x1.75x25-mm) | 22 |
| 34***10 | Plate | 1 |
338-3060 Guard Gp-Bottom
| 33***60 | Guard Group-Bottom | 1 |
| 34***17 | Bolt-Flange Head; (M16x2x40-mm) | 4 |
| 34***02 | Guard As | 1 |
333-3879 Guard Gp-Brush
| 18***83 | Nut-Hex Flange; (M12x1.75-Thd) | 2 |
| 20***50 | Bolt-Shoulder | 2 |
| 23***89 | Nut-Flange; (1/2-13-Thd) | 2 |
338-3201 Guard Gp-Cab
| 17***19 | Lock | 3 |
| 27***71 | Cam-Latch | 3 |
| 33***01 | Guard Group-Cab | 1 |
357-5408 Guard Gp-Cylinder
| 19***19 | Lockwasher | 4 |
| 35***83 | Bolt | 4 |
| 35***11 | Fitting-Grease | 1 |
333-7752 Guard Gp-Lines
| 33***52 | Guard Group-Lines | 1 |
| 33***06 | Band | 4 |
| 34***13 | Bolt-Flange Head; (M10x1.5x20-mm) | 4 |
358-2015 Guard Gp-Lines
| 35***77 | Bolt | 10 |
| 35***97 | Nut | 10 |
| 35***15 | Guard Group-Lines | 1 |
333-8433 Guard Gp-Rear
| 17***19 | Lock | 1 |
| 27***71 | Cam-Latch | 1 |
| 33***33 | Guard Group-Rear | 1 |
333-3750 Hitch Gp-Articulating & Osc
| 02***87 | Fitting-Grease; (Universal Joint) | 2 |
| 33***50 | Hitch Group-Articulating & Osc | 1 |
| 33***05 | Bearing | 1 |
333-3825 Hitch Gp-Towing
| 33***25 | Hitch Group-Towing | 1 |
| 33***97 | Hitch As | 1 |
| 8T***23 | Washer-Plated; (22x35x3.5-mm Thk) | 6 |
333-3790 Hood Gp
| 01***37 | Clevis-Adjustable | 1 |
| 17***25 | Pin; (Snap) | 2 |
| 18***83 | Nut-Hex Flange; (M12x1.75-Thd) | 2 |
333-3820 Ladder Gp
| 00***00 | Ring-Snap | 4 |
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 17***45 | Bolt-Shoulder; (M12x1.75x18-mm) | 4 |
333-8545 Lines Gp-Grease
| 2N***87 | Elbow-Flared Needed For Customer; (Used Without Brakesaver) | 2 |
| 33***45 | Lines Group-Grease | 1 |
| 33***53 | Hose As | 1 |
333-8544 Lines Gp-Grease
| 02***87 | Fitting-Grease; (Universal Joint) | 4 |
| 18***34 | Spacer; (0.438x1x0.5-In Thk) | 1 |
| 33***44 | Lines Group-Grease | 1 |
333-3762 Link Gp-Steering Frame Lock
| 28***91 | Pin | 2 |
| 33***62 | Link Group-Steering Frame Lock | 1 |
| 34***69 | Link | 1 |
338-3080 Pin Gp-Hitch -Expandable, Center Top
| 14***69 | Bolt; (M36x3x80-mm) | 1 |
| 33***80 | Pin Group-Hitch; -Expandable, Center Top | 1 |
| 35***96 | Sleeve | 1 |
338-3079 Pin Gp-Hitch -Expandable, Center Bottom
| 33***79 | Pin Group-Hitch; -Expandable, Center Bottom | 1 |
| 35***97 | Sleeve | 2 |
| 35***99 | Bolt | 2 |
350-1333 Platform Gp-Service
| 35***33 | Platform Group-Service | 1 |
| 35***96 | Nut | 4 |
| 35***01 | Washer | 8 |
Fuel System
116-5410 Cover Gp-Fuel Filter Base
| 11***10 | Cover Group-Fuel Filter Base | 1 |
| 1P***36 | Gasket; (Fuel Priming Pump)(Fuel Priming Pump) | 1 |
| 5P***37 | Washer 5t***54 Plate To 7t***28 Cable As | 1 |
201-5949 Filter Gp-Fuel
| 11***23 | Insert-Fuel Filter | 1 |
| 14***38 | Base As-Fuel Filter | 1 |
| 16***02 | Bracket | 1 |
282-9942 Filter Gp-Primary Fuel
| 03***94 | Connector-Flared | 1 |
| 22***05 | Filter Group-Water Sep & Fuel | 1 |
| 23***77 | Hose As | 1 |
224-9105 Filter Gp-Water Sep & Fuel
| 13***41 | Pump Group-Fuel Priming; (Hand) | 1 |
| 17***70 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 1B***90 | Bolt; (5/16-18x1.375-In)(Rh Front Cover) | 1 |
174-9570 Filter Gp-Water Sep & Fuel
| 17***70 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 22***78 | Seal-Ring; (Fuel And Water Sep Filter) | 1 |
| 32***44 | Filter As-Water Sep & Fuel; (Primary) | 1 |
328-2586 Injector Gp-Fuel
| 10***07 | Seal-O-Ring; (Fuel System) | 1 |
| 14***03 | Seal-O-Ring; (Fuel System) | 2 |
| 14***40 | Ring-Backup; (37.36mm Od), Flasher Switch; Hazard, Replaces 421164a1, Flasher Switch | 1 |
333-3770 Lines Gp-Fuel
| 20***98 | Bolt-Flange Head | 1 |
| 21***34 | Clamp | 2 |
| 33***70 | Lines Group-Fuel | 1 |
333-3774 Lines Gp-Fuel
| 11***28 | Elbow; (90-Deg) | 1 |
| 12***10 | Hose-Hydraulic; (190-cm) | 0 |
| 14***90 | Elbow Group | 1 |
272-5868 Lines Gp-Fuel Filter
| 03***88 | Connector-Tube Assembly To Main Relief | 1 |
| 14***33 | Tube As | 1 |
| 18***08 | Plug As; (High Temperature) | 1 |
191-0461 Lines Gp-Injector Hyd Pump
| 19***61 | Lines Group-Injector Hydraulic Pump | 1 |
| 19***23 | Adapter Group-Oil Line; -Fuel Injection Pump-Unit Injector Hydraulic Pump | 1 |
| 20***80 | Hose As | 1 |
222-5900 Pump & Mtg Gp-Unit Inj Hyd
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
| 22***00 | Pump & Mtg Group-Unit Inj Hydraulic | 1 |
| 22***04 | Seal-O-Ring; (Unit Injector Hydraulic Pump) | 1 |
268-1840 Pump Gp-Fuel Injection
| 23***51 | Bolt-Socket Head; (M8x1.25x65-mm) | 2 |
| 26***40 | Pump Group-Fuel Injection | 1 |
| 32***86 | Injector Group-Fuel | 1 |
338-3086 Pump Gp-Fuel Transfer
| 33***86 | Pump Group-Fuel Transfer | 1 |
| 35***19 | Kit-Service | 1 |
| 35***66 | Rotor | 1 |
333-3886 Pump Gp-Fuel Transfer
| 10***09 | Connector | 1 |
| 14***55 | Elbow As. | 1 |
| 15***52 | Connector As | 1 |
319-0677 Pump Gp-Unit Injector Hyd
| 15***36 | Cartridge | 1 |
| 17***28 | Seal-O-Ring; (Fuel Transfer Pump) | 1 |
| 1F***60 | Washer Roll-Over Group To Deck | 1 |
304-0677 Pump Gp-Unit Injector Hyd
| 17***57 | Pump Group-Fuel Transfer | 1 |
| 17***28 | Seal-O-Ring; (Fuel Transfer Pump) | 1 |
| 22***04 | Seal-O-Ring; (Unit Injector Hydraulic Pump) | 1 |
254-4357 Pump Gp-Unit Injector Hyd
| 17***57 | Pump Group-Fuel Transfer | 1 |
| 17***28 | Seal-O-Ring; (Fuel Transfer Pump) | 1 |
| 22***04 | Seal-O-Ring; (Unit Injector Hydraulic Pump) | 1 |
295-4777 Pump Gp-Unit Injector Hyd
| 17***57 | Pump Group-Fuel Transfer | 1 |
| 17***28 | Seal-O-Ring; (Fuel Transfer Pump) | 1 |
| 22***04 | Seal-O-Ring; (Unit Injector Hydraulic Pump) | 1 |
220-6214 Pump Gp-Unit Injector Hyd
| 16***97 | Seal | 3 |
| 16***36 | Bolt-Socket Head; (M5x0.8x18-mm) | 3 |
| 17***44 | Bolt | 4 |
312-0677 Pump Gp-Unit Injector Hyd
| 16***36 | Bolt-Socket Head; (M5x0.8x18-mm) | 3 |
| 17***57 | Pump Group-Fuel Transfer | 1 |
| 17***28 | Seal-O-Ring; (Fuel Transfer Pump) | 1 |
205-1306 Regulator Gp-Fuel Pressure
| 19***38 | Elbow Assem. | 0 |
| 20***06 | Name-Plate (Portuguese), Regulator Group-Fuel Pressure | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
232-0343 Regulator Gp-Fuel Pressure
| 23***43 | Regulator Group-Fuel Pressure | 1 |
| 29***20 | Regulator As; (Fuel Pressure) | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 1 |
333-3780 Tank Gp-Fuel
| 15***74 | Kit-Connecting Plug; (6-Pin)(Cat Electronic Display Harness) | 1 |
| 33***80 | Tank Group-Fuel | 1 |
| 33***81 | Gasket | 1 |
333-3760 Tank Gp-Fuel
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 19***65 | Clip | 1 |
Hydraulic System
357-1065 Bracket Gp-Mounting
| 35***48 | Kit-Bracket | 1 |
| 35***49 | Kit-Seal; (Main Control Valve) | 3 |
| 35***50 | Kit-Fastener | 1 |
357-1067 Bracket Gp-Mounting
| 35***78 | Kit-Bracket; (Main Control Valve) | 1 |
| 35***79 | Kit-Fastener | 1 |
| 35***49 | Kit-Seal; (Main Control Valve) | 4 |
357-1063 Bracket Gp-Mounting
| 35***78 | Kit-Bracket; (Main Control Valve) | 1 |
| 35***49 | Kit-Seal; (Main Control Valve) | 2 |
| 35***62 | Kit-Tie Rod; (Main Control Valve) | 1 |
352-7839 Cover Gp-Valve End
| 35***39 | Cover Group-Valve End | 1 |
| 35***40 | Bolt As | 1 |
| 35***41 | Plug | 2 |
333-7749 Cylinder & Mtg Gp-Blade
| 2D***67 | Fitting-Grease; (Fan Drive) | 4 |
| 33***49 | Cylinder & Mtg Group-Blade | 1 |
| 33***41 | Cylinder Group-Blade | 2 |
333-3847 Cylinder & Mtg Gp-Hydraulic
| 2D***67 | Fitting-Grease; (Fan Drive) | 4 |
| 33***47 | Cylinder & Mtg Group-Hydraulic | 1 |
| 33***44 | Cylinder Group-Hydraulic | 2 |
333-3846 Cylinder & Mtg Gp-Steering
| 2D***67 | Fitting-Grease; (Fan Drive) | 2 |
| 33***46 | Cylinder & Mtg Group-Steering | 1 |
| 33***95 | Bearing-Aligning | 4 |
338-2941 Cylinder Gp-Blade
| 33***41 | Cylinder Group-Blade | 1 |
| 34***17 | Ring-Guide | 2 |
| 34***20 | Bearing-Sleeve | 1 |
358-3871 Cylinder Gp-Boom
| 18***34 | Nut-Flange; (5/8-18-Thd) | 2 |
| 34***99 | Cylinder Group-Cab Tilt | 1 |
| 34***37 | Bolt-Special | 2 |
355-8635 Cylinder Gp-Boom
| 34***17 | Ring-Guide | 2 |
| 34***20 | Bearing-Sleeve | 2 |
| 34***24 | Bushing | 1 |
345-2399 Cylinder Gp-Cab Tilt
| 34***99 | Cylinder Group-Cab Tilt | 1 |
| 35***88 | Cylinder As | 1 |
| 35***89 | Rod As | 1 |
333-8549 Cylinder Gp-Cab Tilt
| 1K***72 | Locknut Horn To Guard | 1 |
| 33***49 | Cylinder Group-Cab Tilt | 1 |
| 35***96 | Kit-Seal | 1 |
357-5419 Cylinder Gp-Extendable Stick
| 18***16 | Fitting-Grease | 2 |
| 35***36 | Kit-Seal | 1 |
| 35***12 | Cylinder As | 1 |
350-0086 Cylinder Gp-Extendable Stick
| 35***86 | Cylinder Group-Extendable Stick | 1 |
| 35***94 | Sleeve-Stop | 1 |
| 35***95 | Guide | 3 |
351-6223 Cylinder Gp-Grapple
| 20***63 | Fitting-Grease | 2 |
| 35***37 | Kit-Seal | 1 |
| 35***11 | Seal | 1 |
351-6226 Cylinder Gp-Grapple
| 2K***37 | Nut (National Fine); (3/4-16-Thd) | 1 |
| 35***57 | Kit-Seal | 1 |
| 35***26 | Cylinder Group-Grapple | 1 |
338-2926 Cylinder Gp-Hydraulic
| 33***26 | Cylinder Group-Hydraulic | 1 |
| 35***58 | Piston As | 1 |
| 35***59 | Guide-Rod | 1 |
338-2944 Cylinder Gp-Hydraulic
| 33***44 | Cylinder Group-Hydraulic | 1 |
| 35***87 | Kit-Seal; (Piston) | 1 |
| 35***88 | Kit-Seal; (Head)(Head) | 1 |
338-2942 Cylinder Gp-Hydraulic
| 33***42 | Cylinder Group-Hydraulic | 1 |
| 35***50 | Rod As | 1 |
| 35***52 | Kit-Seal; (Rod) | 1 |
338-2945 Cylinder Gp-Steering -Steering, Rh
| 03***69 | Setscrew-Socket; (1/4-20x0.38-In) | 2 |
| 33***45 | Cylinder Group-Steering; (Steering, Rh)(Rh) | 1 |
| 35***88 | Kit-Seal; (Head)(Head) | 1 |
360-1410 Cylinder Gp-Steering
| 35***52 | Kit-Seal; (Rod) | 1 |
| 35***53 | Kit-Seal; (Bore) | 1 |
| 35***54 | Locknut | 1 |
338-3026 Filter Gp-Oil
| 33***85 | Pump & Mtg Group-Hydraulic | 1 |
| 33***46 | Cylinder & Mtg Group-Steering | 1 |
| 33***47 | Cylinder & Mtg Group-Hydraulic | 1 |
333-8555 Hydraulic Ar
| 17***20 | Strap-Dual Clamp | 2 |
| 18***43 | Locknut; (M10x1.5-Thd) | 4 |
| 33***38 | Lines Group-Hydraulic | 1 |
333-3937 Lines Gp-Blade Cylinder
| 33***37 | Lines Group-Blade Cylinder | 1 |
| 34***72 | Bracket As | 3 |
| 34***73 | Bracket As | 2 |
358-1587 Lines Gp-Boom
| 11***70 | Valve-Check | 1 |
| 12***76 | Kit-Seal; (Counterbalance Valve) | 1 |
| 33***00 | Lines Group-Hydraulic; -Cab Tilt | 1 |
357-5406 Lines Gp-Cylinder
| 35***09 | Guard | 1 |
| 35***10 | Plate-Clamp | 1 |
| 35***11 | Plate-Clamp | 2 |
338-3084 Lines Gp-Cylinder
| 33***84 | Lines Group-Cylinder | 1 |
| 35***71 | Bolt | 1 |
| 35***95 | Nut | 1 |
358-2321 Lines Gp-Extendable Stick
| 14***28 | Connector Assem. | 2 |
| 14***45 | Connector As | 2 |
| 14***70 | Elbow, 90°,-8 Orb Swiv. /-8 Orfs | 2 |
350-1374 Lines Gp-Extendable Stick
| 35***12 | Plate-Clamp | 2 |
| 35***25 | Plate | 4 |
| 35***74 | Lines Group-Extendable Stick | 1 |
338-3100 Lines Gp-Hydraulic -Cab Tilt
| 14***28 | Connector Assem. | 2 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 4 |
| 14***54 | Elbow; (45) (-8/-8 Orb/Orfs) | 3 |
333-8321 Lines Gp-Hydraulic
| 10***36 | Hose As | 1 |
| 11***66 | Seal-O-Ring | 1 |
| 12***11 | Hose-Hydraulic; (146-cm) | 0 |
333-3938 Lines Gp-Hydraulic
| 14***27 | Connector Group | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 2 |
| 14***41 | Connector Group | 2 |
333-8552 Lines Gp-Hydraulic -Tank Fill
| 14***68 | Elbow Group | 1 |
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 1 |
| 15***29 | Tee As | 2 |
333-8331 Lines Gp-Hydraulic
| 14***27 | Connector Group | 1 |
| 14***55 | Union As | 1 |
| 16***09 | Union As | 1 |
333-8547 Lines Gp-Hydraulic Control
| 21***34 | Clamp | 1 |
| 33***87 | Lines Group-Hydraulic Fan | 1 |
| 33***47 | Lines Group-Hydraulic Control | 1 |
333-8287 Lines Gp-Hydraulic Fan
| 15***52 | Clamp-Half | 10 |
| 33***87 | Lines Group-Hydraulic Fan | 1 |
| 33***23 | Lines Group-Hydraulic Oil Cooler | 1 |
333-8282 Lines Gp-Hydraulic Fan
| 14***15 | Connector As | 1 |
| 14***27 | Connector Group | 1 |
| 14***39 | Connector As. | 2 |
333-8322 Lines Gp-Hydraulic Oil Cooler
| 11***49 | Fitting As; (Quick Disconnect) | 2 |
| 1P***79 | Flange (Half) | 18 |
| 1P***82 | Flange-Half | 2 |
333-8323 Lines Gp-Hydraulic Oil Cooler
| 20***96 | Bolt-Flange Head; (M10x1.5x45-mm) | 1 |
| 33***23 | Lines Group-Hydraulic Oil Cooler | 1 |
| 33***83 | Lines Group-Ladder | 1 |
333-8382 Lines Gp-Ladder
| 14***68 | Elbow Group | 1 |
| 14***77 | Elbow As. | 1 |
| 33***82 | Lines Group-Ladder | 1 |
333-8383 Lines Gp-Ladder
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
| 14***54 | Elbow; (45) (-8/-8 Orb/Orfs) | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
333-8548 Lines Gp-Lift Cylinder
| 15***94 | Adapter As | 2 |
| 15***44 | Seal | 1 |
| 16***43 | Seal | 1 |
333-8572 Lines Gp-Log Loader
| 08***53 | Bolt; (1/4-20x0.62-In) | 2 |
| 09***55 | Breather; (Hydraulic Tank) | 1 |
| 17***05 | Elbow | 1 |
333-8571 Lines Gp-Log Loader
| 14***70 | Elbow, 90°,-8 Orb Swiv. /-8 Orfs | 1 |
| 15***37 | Tee As. | 2 |
| 29***46 | Hose As; (Swing Left) | 1 |
333-8319 Lines Gp-Pump
| 20***96 | Bolt-Flange Head; (M10x1.5x45-mm) | 1 |
| 33***19 | Lines Group-Pump | 1 |
| 33***21 | Lines Group-Hydraulic | 1 |
333-8320 Lines Gp-Steering
| 12***51 | Kit-Seal; (Pressure Relief Valve) | 1 |
| 31***60 | Seal Group | 3 |
| 33***20 | Lines Group-Steering | 1 |
338-3054 Manifold Gp-Control
| 33***54 | Manifold Group-Control | 1 |
| 33***89 | Pump Group-Gear | 1 |
| 7X***66 | Capscrew; (Hex Hd) (3/4-10x2 Gd 8 Z) (Current Adapters) | 4 |
333-3890 Pump & Mtg Gp-Hydraulic
| 1G***88 | Seal-O-Ring | 1 |
| 33***90 | Pump & Mtg Group-Hydraulic | 1 |
| 33***87 | Pump Group-Piston | 1 |
333-3785 Pump & Mtg Gp-Hydraulic
| 11***77 | Bolt; (M16x2x65-mm) | 2 |
| 33***85 | Pump & Mtg Group-Hydraulic | 1 |
| 33***88 | Pump Group-Hydraulic; (Hydrostatic) | 1 |
333-8377 Pump & Mtg Gp-Hydraulic Fan
| 09***75 | Seal - O-Ring (7.80 mm Id) | 7 |
| 09***80 | Seal-O-Ring (Id=11.80mm) | 2 |
| 09***87 | Seal-O-Ring (Id=20.80mm) | 1 |
338-3089 Pump Gp-Gear
| 17***36 | Nut-Hex Flange; (M8x1.25-Thd)(M8x1.25) | 4 |
| 23***01 | Valve Group-Check | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
338-3088 Pump Gp-Hydraulic
| 23***86 | Kit-Bearing; (Generator Pump) | 1 |
| 23***87 | Kit-Bearing; (Generator Pump) | 1 |
| 23***73 | Seal-O-Ring | 6 |
333-8551 Pump Gp-Hydraulic Tank Fill
| 33***51 | Pump Group-Hydraulic Tank Fill | 1 |
| 35***07 | Grill | 1 |
| 35***08 | Gasket | 1 |
338-3087 Pump Gp-Piston
| 16***73 | Sensor-Temperature; (Transmission Gearbox Oil) | 1 |
| 17***60 | Switch Group-Liquid Level; -Rear Engine Oil-Ster, Hydraulic Fan Oil-Engine On-Steering Oil, Engine Off-Auxiliary Coolant-Front Engine Oil-Brake Oil, Hoist-Engine Coolant-Tc Oil-Low, Cold | 1 |
| 30***06 | Screw; (M10x1.5x16-mm) | 8 |
338-3090 Pump Gp-Vacuum
| 33***47 | Lines Group-Hydraulic Control | 1 |
| 33***83 | Valve Group-Control | 1 |
| 33***90 | Pump Group-Vacuum | 1 |
333-8533 Tank Gp-Hydraulic
| 18***43 | Locknut; (M10x1.5-Thd) | 4 |
| 33***33 | Tank Group-Hydraulic | 1 |
| 33***31 | Valve Group-Steering | 1 |
333-8546 Valve & Lines Gp-Hyd Control
| 33***46 | Valve & Lines Group-Hydraulic Control | 1 |
| 35***33 | Valve Group-Control | 1 |
| 35***34 | Valve Group-Control | 1 |
333-3935 Valve & Mtg Gp-Steering
| 33***35 | Valve & Mtg Group-Steering | 1 |
| 35***49 | Kit-Shim | 1 |
| 35***50 | Kit-Repair | 1 |
338-3135 Valve Gp-Blade Control
| 12***51 | Kit-Seal; (Pressure Relief Valve) | 4 |
| 14***88 | Kit-Seal; (Ride Control, Switch) | 4 |
| 14***89 | Kit-Seal | 3 |
338-3050 Valve Gp-Brake Control
| 17***00 | Valve Group-Flow Control; (Pilot Supply)(Inlet) | 1 |
| 17***54 | Plug | 1 |
| 33***50 | Valve Group-Brake Control | 1 |
352-7628 Valve Gp-Control
| 17***85 | Kit-Seal; (Main Control Valve) | 1 |
| 35***86 | Bracket Group-Mounting | 1 |
| 35***90 | Connector As | 1 |
352-7642 Valve Gp-Control
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 13***13 | Bolt-Socket Head; (M6x1x30-mm) | 3 |
| 17***59 | Valve Group-Solenoid; (Control Valve) | 2 |
352-7836 Valve Gp-Control
| 14***88 | Kit-Seal; (Ride Control, Switch) | 1 |
| 15***38 | Kit-Valve Seal | 1 |
| 27***38 | Kit-Seal | 2 |
352-7651 Valve Gp-Control
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 13***13 | Bolt-Socket Head; (M6x1x30-mm) | 3 |
| 17***59 | Valve Group-Solenoid; (Control Valve) | 2 |
352-7835 Valve Gp-Control
| 35***11 | Valve Group-Control; -Inlet | 1 |
| 35***13 | Valve Group-Control | 1 |
| 35***81 | Kit-Seal | 3 |
352-7833 Valve Gp-Control
| 13***45 | Seal Kit; (Includes Parts Marked J) | 1 |
| 35***13 | Coil | 2 |
| 35***14 | Cartridge | 2 |
352-7648 Valve Gp-Control
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 13***13 | Bolt-Socket Head; (M6x1x30-mm) | 3 |
| 17***59 | Valve Group-Solenoid; (Control Valve) | 2 |
352-7650 Valve Gp-Control
| 22***01 | Kit-Seal | 1 |
| 35***50 | Valve Group-Control | 1 |
| 35***26 | Plug As | 3 |
350-3513 Valve Gp-Control
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 16***37 | Valve Group-Relief; (Line) | 1 |
| 17***47 | Kit-Spring; (Control Valve) | 1 |
350-3511 Valve Gp-Control -Inlet
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 16***37 | Valve Group-Relief; (Line) | 2 |
| 17***47 | Kit-Spring; (Control Valve) | 1 |
352-7834 Valve Gp-Control
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 13***13 | Bolt-Socket Head; (M6x1x30-mm) | 3 |
| 17***59 | Valve Group-Solenoid; (Control Valve) | 2 |
352-7649 Valve Gp-Control
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 13***13 | Bolt-Socket Head; (M6x1x30-mm) | 3 |
| 17***59 | Valve Group-Solenoid; (Control Valve) | 2 |
338-2983 Valve Gp-Control
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 12***45 | Seal-O-Ring; (25.3mm Id) | 1 |
338-3132 Valve Gp-Main Control
| 33***32 | Valve Group-Main Control | 1 |
| 35***81 | Valve-Solenoid | 1 |
338-3052 Valve Gp-Pump Control
| 33***52 | Valve Group-Pump Control | 1 |
| 35***33 | Valve Group-Control | 1 |
| 35***36 | Valve Group-Control | 1 |
338-3053 Valve Gp-Relief
| 33***53 | Valve Group-Relief | 1 |
| 34***48 | Cylinder As-Hydraulic | 4 |
| 34***49 | Piston | 4 |
338-3131 Valve Gp-Steering
| 33***31 | Valve Group-Steering | 1 |
| 34***79 | Boom As; (Outer) | 1 |
| 34***80 | Pin | 1 |
Implements
350-1360 Actuator Gp-Rotary
| 34***90 | Pad-Wear | 2 |
| 35***41 | Boom As; (Inner) | 1 |
| 35***42 | Pin As | 1 |
350-1370 Boom Gp -Outer
| 34***85 | Plate | 2 |
| 34***86 | Plate | 2 |
| 34***87 | Pad-Wear | 2 |
350-1376 Boom Gp -Inner
| 34***90 | Pad-Wear | 2 |
| 35***42 | Pin As | 1 |
| 35***43 | Cap | 1 |
358-2460 Boom Gp -Inner
| 34***92 | Boom As-Stub | 1 |
| 34***93 | Bushing | 2 |
| 34***94 | Bushing-Spacer | 1 |
358-2459 Boom Gp -Outer
| 34***20 | Bearing-Sleeve | 2 |
| 34***11 | Boom As | 1 |
| 34***13 | Link As | 1 |
350-1366 Boom Gp-Fore
| 34***17 | Pin As | 1 |
| 34***27 | Shim | 4 |
| 35***30 | Spacer | 1 |
350-1363 Boom Gp-Stub
| 34***17 | Pin As | 1 |
| 34***27 | Shim | 3 |
| 35***30 | Spacer | 1 |
350-1375 Mounting Gp-Stick
| 11***28 | Connector-Hose | 2 |
| 14***26 | Screw-Flat Head; (6-20x0.75-In) | 34 |
| 15***15 | Louver As-Vent | 8 |
358-2455 Mounting Gp-Stick
| 11***32 | Valve-Expansion | 1 |
| 23***78 | Grommet | 2 |
| 35***64 | Probe As | 1 |
Lubrication System
191-0523 Adapter Gp-Oil Line -Fuel Injection Pump
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 19***22 | Adapter | 1 |
| 19***23 | Adapter Group-Oil Line; -Fuel Injection Pump-Unit Injector Hydraulic Pump | 1 |
222-5946 Breather Gp
| 14***54 | Bolt; (M8x1.25x105-mm) | 1 |
| 16***10 | Breather As; (Crankcase) | 1 |
| 22***46 | Breather Group; -Crankcase | 1 |
7w-8798 Filler Gp-Engine Oil
| 13***19 | Seal-Integral; (Integral) | 1 |
| 5L***52 | Cap Assembly, Including:-; (Engine) | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 4 |
201-9775 Filter Gp-Engine Oil
| 1R***07 | Filter As-Engine Oil; (Advanced Efficiency) | 1 |
| 20***74 | Base As-Oil Filter; (Engine) | 1 |
| 20***75 | Filter Group-Engine Oil | 1 |
275-7798 Fumes Disposal Gp
| 20***68 | Spacer; (11x16x60-mm Thk) | 1 |
| 22***10 | Hose-Disposal; (Fumes Disposal) | 1 |
| 27***98 | Fumes Disposal Group | 1 |
238-8178 Gauge Gp-Oil Level (Dipstick) -Engine
| 17***94 | Gauge-Oil Level; (Dipstick)(Engine) | 1 |
| 1S***63 | Plug; (Mounted-Bottom | 3 |
| 23***78 | Gauge Group-Oil Level (Dipstick); -Engine | 1 |
7c-2475 Lines Gp-Engine Oil
| 3P***56 | Seal-O-Ring; (21.82mm Id) | 2 |
| 4W***32 | Elbow-Outlet | 1 |
| 6V***40 | Bolt (M8x1.25x25mm); (M8x1.25x25-mm) | 4 |
198-0030 Lines Gp-Turbocharger Oil
| 18***94 | Hose As-Oil Supply | 1 |
| 19***30 | Lines Group-Turbocharger Oil | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
200-4497 Pump Gp-Engine Oil
| 18***77 | Pump Group-Engine Oil | 1 |
| 20***97 | Pump Group-Engine Oil | 1 |
| 7W***37 | Shaft-Oil Pump | 1 |
192-2981 Pump Gp-Engine Oil
| 19***81 | Pump Group-Engine Oil | 1 |
| 20***97 | Pump Group-Engine Oil | 1 |
| 6V***15 | Bolt; (M10x1.5x75-mm) | 2 |
201-9777 Valve Gp-Fluid Sampling
| 20***77 | Valve Group-Fluid Sampling; -Engine Oil | 1 |
| 3J***54 | Packing,Preformed Part Of Kit P/N 5r***27 | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
Machine Arrangement
333-3777 Chassis Ar
| 33***50 | Hitch Group-Articulating & Osc | 1 |
| 33***58 | Frame Group-Rear | 1 |
| 33***60 | Tank Group-Fuel | 1 |
348-3034 Common Ar
| 32***98 | Engine Ar-Complete | 1 |
| 33***49 | Installation Ar-Engine | 1 |
| 33***77 | Chassis Ar | 1 |
348-3036 Common Ar
| 32***98 | Engine Ar-Complete | 1 |
| 33***49 | Installation Ar-Engine | 1 |
| 33***77 | Chassis Ar | 1 |
Operator Station
333-8424 Air Conditioner & Mounting Gp
| 12***45 | Screw | 6 |
| 22***73 | Plug | 2 |
| 33***24 | Air Conditioner & Mounting Group | 1 |
345-3030 Air Conditioner Gp
| 34***25 | Cab Group | 1 |
| 34***30 | Air Conditioner Group | 1 |
| 35***88 | Bolt; (M8x1.25x22-mm) | 1 |
360-1375 Cab Gp
| 12***43 | Spring-Gas | 1 |
| 35***64 | Strap | 1 |
| 35***69 | Impellor, Tur Compre, Pin-Hinge | 2 |
344-0025 Cab Gp
| 33***33 | Compressor-Refrigerant | 1 |
| 34***25 | Cab Group | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
333-3735 Compressor & Mtg Gp-Refrig
| 12***09 | Screw-Flat Head; (M10x1.5x20-mm) | 4 |
| 33***35 | Compressor & Mtg Group-Refrig | 1 |
| 35***64 | Strap | 1 |
352-4077 Door Gp-Cab -Rh
| 03***06 | Seal (Use As Required) | 1 |
| 19***86 | Adapter As | 1 |
| 20***72 | Plug As | 1 |
352-4076 Door Gp-Cab -Lh
| 03***31 | Elbow-To Tube As | 2 |
| 03***68 | Elbow | 2 |
| 20***98 | Bolt-Flange Head | 1 |
333-3765 Lines Gp-Air Conditioner
| 16***50 | Sleeve-Abrasion; (100-In Each) | 0 |
| 19***86 | Adapter As | 1 |
| 26***68 | Hose; (192-cm) | 0 |
338-2909 Lines Gp-Cab Heater
| 1Y***13 | Tee-Pipe | 1 |
| 33***09 | Lines Group-Cab Heater | 1 |
| 33***17 | Hose As | 1 |
338-2930 Lines Gp-Heater -Cold Weather
| 30***45 | Antenna As; (Sirius Satellite) | 1 |
| 32***12 | Cable As | 1 |
| 33***43 | Grommet | 1 |
333-8573 Lines Gp-Heater & Air Cond
| 11***25 | Screw-Flat Head; (M6x1x25-mm) | 3 |
| 20***50 | Bolt-Shoulder | 1 |
| 2J***50 | Ring-Retaining | 6 |
333-3809 Mounting Gp-Antenna
| 33***34 | Trim Group-Cab | 1 |
| 33***54 | Window Group-Cab | 1 |
| 33***95 | Mounting Group-Cab | 1 |
333-3795 Mounting Gp-Cab
| 33***95 | Mounting Group-Cab | 1 |
| 35***16 | Button-Push; (Hydraulic Oil Pressure) | 1 |
| 35***17 | Button-Push; (Turn Left, Right) | 2 |
333-7773 Operator Ar
| 18***12 | Bolt; (M20x1.5x52.5-mm) | 2 |
| 18***35 | Washer | 2 |
| 33***73 | Operator Ar | 1 |
345-1930 Panel Gp-Control
| 34***30 | Panel Group-Control | 1 |
| 35***88 | Bolt; (M8x1.25x22-mm) | 147 |
| 35***04 | Washer; (0.344x0.875x0.063-In Thk) | 147 |
338-3078 Pin Gp-Hinge
| 13***90 | Bushing; (Radio Mount) | 1 |
| 13***02 | Sleeve-Trim | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
357-1691 Plate Gp-Fops
| 34***46 | Seat Group-Suspension | 1 |
| 35***91 | Plate Group-Fops | 1 |
333-3813 Radio Gp
| 33***13 | Radio Group | 1 |
| 34***47 | Seat Group-Suspension | 1 |
333-3817 Seat Gp-Suspension
| 33***17 | Seat Group-Suspension | 1 |
| 35***05 | Headrest | 1 |
| 35***06 | Adjustment Group-Seat | 1 |
344-0046 Seat Gp-Suspension
| 34***46 | Seat Group-Suspension | 1 |
| 35***64 | Pump-Washer; (24-Volt) | 3 |
| 35***65 | Grommet | 3 |
344-0047 Seat Gp-Suspension
| 11***58 | Washer; (6.5x17x1-mm Thk) | 90 |
| 12***07 | Screw-Hex Socket; (M4x0.7x20-mm) | 12 |
| 13***92 | Retainer-Captive | 36 |
333-3816 Seat Gp-Suspension
| 33***16 | Seat Group-Suspension | 1 |
| 35***05 | Headrest | 1 |
| 35***06 | Adjustment Group-Seat | 1 |
344-0049 Tank Gp-Window Washer
| 12***07 | Screw-Hex Socket; (M4x0.7x20-mm) | 14 |
| 34***45 | Bracket; (Lh) | 1 |
| 34***48 | Bracket; (Lh) | 1 |
333-3734 Trim Gp-Cab
| 33***34 | Trim Group-Cab | 1 |
| 34***38 | Window; (Rear) | 1 |
| 34***41 | Window; (Door)(Rh, Lh) | 2 |
333-3815 Visor Gp-Cab
| 14***95 | Hose; (650-cm Each) | 0 |
| 17***94 | Bolt; (M8x1.25x16-mm) | 10 |
| 33***15 | Visor Group-Cab | 1 |
333-3754 Window Gp-Cab
| 14***95 | Hose; (650-cm Each) | 0 |
| 17***94 | Bolt; (M8x1.25x16-mm) | 12 |
| 33***54 | Window Group-Cab | 1 |
333-3821 Wiper & Washer Gp-Window -Front, Rear, Side
| 33***21 | Wiper & Washer Group-Window; -Front, Rear, Side | 1 |
| 35***90 | Adapter | 1 |
| 35***91 | Shaft-Drive | 1 |
333-3819 Wiper & Washer Gp-Window -Front, Rear
| 33***19 | Wiper & Washer Group-Window; -Front, Rear | 1 |
| 35***90 | Adapter | 1 |
| 35***95 | Blade-Wiper; (26-Inch) | 1 |
345-1676 Wiper Gp-Window -Rear
| 34***76 | Wiper Group-Window; -Rear | 1 |
| 35***90 | Adapter | 1 |
| 35***95 | Blade-Wiper; (26-Inch) | 1 |
345-1679 Wiper Gp-Window -Front
| 34***79 | Wiper Group-Window; -Front | 1 |
| 35***90 | Adapter | 1 |
| 35***95 | Blade-Wiper; (26-Inch) | 1 |
345-1680 Wiper Gp-Window -Lh
| 33***52 | Frame Group-Front | 1 |
| 33***36 | Blade Group-Decking | 1 |
| 33***37 | Lines Group-Blade Cylinder | 1 |
345-1681 Wiper Gp-Window -Rh
| 2D***67 | Fitting-Grease; (Fan Drive) | 2 |
| 33***42 | Pin As | 2 |
| 34***17 | Bolt-Flange Head; (M16x2x40-mm) | 2 |
Power Train
338-2900 Axle & Mounting Ar
| 33***44 | Axle Ar; -Bogie | 1 |
| 33***00 | Axle & Mounting Ar | 1 |
| 34***80 | Bolt; (M30x3.5x250-mm) | 4 |
338-2895 Axle & Mtg Ar-Front
| 33***66 | Axle Ar-Front; -Bogie | 1 |
| 33***95 | Axle & Mtg Ar-Front | 1 |
| 34***80 | Bolt; (M30x3.5x250-mm) | 4 |
333-3844 Axle Ar -Bogie
| 33***44 | Axle Ar; -Bogie | 1 |
| 34***10 | Differential Group | 1 |
| 34***11 | Axle Group-Fixed | 1 |
333-3773 Axle Ar-Fixed
| 33***73 | Axle Ar-Fixed | 1 |
| 33***00 | Guard Group-Bottom; -8wd | 1 |
| 33***95 | Axle & Mtg Ar-Front | 1 |
333-3772 Axle Ar-Fixed -Front
| 33***72 | Axle Ar-Fixed; -Front | 1 |
| 33***01 | Guard Group-Axle; -6wd | 1 |
| 33***93 | Axle Group-Fixed; -Front | 1 |
333-3766 Axle Ar-Front -Bogie
| 33***66 | Axle Ar-Front; -Bogie | 1 |
| 34***85 | Axle Group-Fixed | 1 |
| 34***27 | Differential Group | 1 |
333-3755 Axle Ar-Rear -Bogie
| 33***55 | Axle Rear Axle; -Bogie | 1 |
| 34***27 | Differential Group | 1 |
| 34***31 | Axle Group-Fixed | 1 |
348-2412 Axle Gp
| 34***53 | Cover | 6 |
| 34***54 | Shaft | 6 |
| 34***56 | Bushing-Spacer | 6 |
333-3811 Axle Gp-Fixed -Front
| 33***11 | Axle Group-Fixed; -Front | 1 |
| 34***35 | Differential & Bevel Gear Group | 1 |
| 34***37 | Axle Group-Fixed; -Front | 1 |
348-2411 Axle Gp-Fixed
| 33***28 | Shaft-Gear; (17-Teeth) | 1 |
| 34***21 | Cap | 10 |
| 34***24 | Ring-Scraper | 1 |
357-0165 Axle Gp-Fixed
| 34***90 | Cylinder Group-Brake | 1 |
| 34***41 | Disc | 6 |
| 34***42 | Disc-Friction | 6 |
356-4448 Axle Gp-Fixed
| 34***16 | Shaft-Sun Gear | 1 |
| 34***21 | Cap | 4 |
| 34***24 | Ring-Scraper | 1 |
343-8837 Axle Gp-Fixed -Front
| 34***90 | Cylinder Group-Brake | 1 |
| 34***41 | Disc | 6 |
| 34***42 | Disc-Friction | 6 |
357-0478 Axle Gp-Fixed
| 33***29 | Shaft-Gear; (17-Teeth) | 1 |
| 34***21 | Cap | 5 |
| 34***24 | Ring-Scraper | 1 |
338-2893 Axle Gp-Fixed -Front
| 33***11 | Axle Group-Fixed; -Front | 1 |
| 33***93 | Axle Group-Fixed; -Front | 1 |
| 34***80 | Bolt; (M30x3.5x250-mm) | 4 |
356-0049 Axle Gp-Fixed
| 34***16 | Shaft-Sun Gear | 1 |
| 34***21 | Cap | 4 |
| 34***24 | Ring-Scraper | 1 |
341-9485 Axle Gp-Fixed
| 34***85 | Axle Group-Fixed | 1 |
| 34***16 | Shaft-Sun Gear | 1 |
| 34***21 | Cap | 4 |
341-9631 Axle Gp-Fixed
| 34***16 | Shaft-Sun Gear | 1 |
| 34***21 | Cap | 4 |
| 34***24 | Ring-Scraper | 1 |
341-9654 Axle Gp-Front
| 34***54 | Axle Group-Front | 1 |
| 34***53 | Cover | 6 |
| 34***54 | Shaft | 6 |
338-2894 Bogie Gp-Rear
| 33***55 | Axle Rear Axle; -Bogie | 1 |
| 33***94 | Bogie Group-Rear | 1 |
| 34***80 | Bolt; (M30x3.5x250-mm) | 4 |
343-8850 Case Gp-Transmission
| 34***40 | Fork | 1 |
| 34***50 | Case Group-Transmission | 1 |
| 34***56 | Sensor; (Transmission) | 2 |
348-2415 Cylinder Gp-Brake -Lh
| 34***82 | Cap | 1 |
| 34***83 | Housing-Main | 1 |
| 34***84 | Piston | 1 |
341-9490 Cylinder Gp-Brake
| 34***90 | Cylinder Group-Brake | 1 |
| 34***82 | Cap | 1 |
| 34***83 | Housing-Main | 1 |
348-2416 Cylinder Gp-Brake -Rh
| 34***82 | Cap | 1 |
| 34***83 | Housing-Main | 1 |
| 34***84 | Piston | 1 |
343-8927 Cylinder Gp-Gearshift
| 34***70 | Piston | 1 |
| 34***71 | Housing-Cylinder | 1 |
| 34***75 | Cap | 1 |
343-8835 Differential & Bevel Gear Gp
| 33***21 | Case | 1 |
| 34***91 | Kit-Shim | 1 |
| 34***00 | Kit-Shim | 2 |
348-2410 Differential Gp
| 33***06 | Kit-Bushing | 1 |
| 34***91 | Kit-Shim | 1 |
| 34***09 | Set-Yoke | 1 |
341-9627 Differential Gp
| 34***91 | Kit-Shim | 1 |
| 34***99 | Housing-Differential | 1 |
| 34***00 | Kit-Shim | 2 |
343-8838 Drive Gp-Final
| 34***27 | Plate-Lock | 8 |
| 34***28 | Shaft-Gear | 1 |
| 34***29 | Hub-Wheel | 1 |
341-9655 Drive Gp-Final
| 34***55 | Drive Group-Final | 1 |
| 34***27 | Plate-Lock | 8 |
| 34***32 | Seal | 1 |
348-2413 Drive Gp-Final
| 34***32 | Seal | 1 |
| 34***33 | Ring | 1 |
| 34***73 | Nut-Spanner; (M85x2-Thd) | 1 |
333-7750 Drive Gp-Pump
| 1L***09 | Screw,Cap,Socket He Housing Mtg | 8 |
| 33***50 | Drive Group-Pump | 1 |
| 33***85 | Coupling-Pump | 1 |
343-8854 Gear Gp-Transfer
| 34***54 | Gear Group-Transfer | 1 |
| 34***65 | Kit-Shim | 1 |
| 34***73 | Shaft-Gear | 1 |
343-8830 Gear Gp-Transfer
| 34***30 | Gear Group-Transfer | 1 |
| 34***36 | Shaft-Pinion | 1 |
| 34***42 | Gear Set | 1 |
343-8839 Gear Gp-Transfer
| 34***39 | Gear Group-Transfer | 1 |
| 34***41 | Shaft-Pinion; (22-Teeth) | 1 |
| 34***55 | Gear Set | 1 |
333-3940 Lines Gp-Differential Lock
| 03***14 | . Bolt; Socket, Screw (On Left Side Of Seat Frame Plate) | 4 |
| 13***18 | Fitting Group-Tube | 3 |
| 15***06 | Connector As; (M14x1.5 To 11/16-16, 90-Deg) | 10 |
333-3941 Lines Gp-Differential Lock
| 11***27 | Hose Assem. | 1 |
| 12***41 | Hose As | 1 |
| 13***98 | Connector | 1 |
333-3939 Lines Gp-Differential Lock
| 14***28 | Connector Assem. | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 3 |
333-8288 Lines Gp-Hydrostatic
| 33***88 | Lines Group-Hydrostatic | 1 |
| 33***02 | Lines Group-Hydrostatic; -Hystat Propel | 1 |
| 33***98 | Hose As | 2 |
333-8302 Lines Gp-Hydrostatic -Hystat Propel
| 13***25 | Flange-Split | 8 |
| 14***17 | Adapter, -12 Orb / -16 Orfs | 1 |
| 14***35 | Connect Group; (Each Includes) | 2 |
333-3771 Motor & Mtg Gp-Propel
| 30***29 | Bolt; (M20x2.5x55-mm) | 4 |
| 33***71 | Motor & Mtg Group-Propel | 1 |
| 33***57 | Motor Group-Piston | 1 |
338-3200 Motor Gp-Piston
| 18***83 | Nut-Hex Flange; (M12x1.75-Thd) | 2 |
| 33***55 | Motor Group-Piston | 1 |
| 33***00 | Motor Group-Piston | 1 |
338-3057 Motor Gp-Piston
| 10***85 | Seal-O-Ring (6.07mm Id) | 6 |
| 11***16 | Seal-O-Ring | 1 |
| 13***76 | Seal-O-Ring | 2 |
338-3055 Motor Gp-Piston
| 1L***68 | Ring-Retaining | 1 |
| 20***93 | Kit-Seal | 1 |
| 20***94 | Seal; (Shaft) | 1 |
348-2414 Planetary Gp-Final Drive
| 34***65 | Pin | 4 |
| 34***66 | Carrier-Planetary | 1 |
| 34***14 | Planetary Group-Final Drive | 1 |
333-7774 Power Train Ar
| 33***71 | Motor & Mtg Group-Propel | 1 |
| 33***99 | Transmission & Mounting Group | 1 |
| 33***22 | Shaft Group-Drive | 1 |
333-7753 Power Train Ar
| 33***71 | Motor & Mtg Group-Propel | 1 |
| 33***22 | Shaft Group-Drive | 1 |
| 33***90 | Pump & Mtg Group-Hydraulic | 1 |
338-2950 Shaft Gp-Drive
| 33***50 | Shaft Group-Drive | 1 |
| 35***02 | Shaft | 1 |
| 35***03 | Nut-Castle | 2 |
343-8886 Shaft Gp-Drive
| 34***59 | Set-Yoke | 1 |
| 34***61 | Kit-Shim | 1 |
| 34***69 | Piston | 1 |
333-3822 Shaft Gp-Drive
| 33***22 | Shaft Group-Drive | 1 |
| 33***48 | Slip Joint Group | 1 |
| 33***49 | Slip Joint Group | 2 |
333-3800 Tire & Rim Ar
| 33***57 | Tire & Rim Group; -Rear | 4 |
| 33***00 | Tire & Rim Ar | 1 |
| 34***81 | Tire & Rim Group; -Front | 2 |
333-3740 Tire & Rim Ar
| 33***40 | Tire & Rim Ar | 1 |
| 34***02 | Tire & Rim Group | 8 |
333-3907 Tire & Rim Ar
| 33***07 | Tire & Rim Ar | 1 |
| 34***81 | Tire & Rim Group; -Front | 2 |
| 34***02 | Tire & Rim Group | 4 |
333-3756 Tire & Rim Ar
| 33***56 | Tire & Rim Ar | 1 |
| 33***57 | Tire & Rim Group; -Rear | 8 |
333-3767 Tire & Rim Ar
| 33***67 | Tire & Rim Ar | 1 |
| 34***81 | Tire & Rim Group; -Front | 2 |
| 34***00 | Tire & Rim Group | 4 |
333-3759 Tire & Rim Ar
| 33***59 | Tire & Rim Ar | 1 |
| 34***00 | Tire & Rim Group | 8 |
345-2900 Tire & Rim Gp
| 33***19 | Wheel; (26.5x24) | 1 |
| 33***65 | Tire; (750/55-26.5) | 1 |
| 33***70 | Tube | 1 |
333-3757 Tire & Rim Gp -Rear
| 33***57 | Tire & Rim Group; -Rear | 1 |
| 33***78 | Wheel; (26.5x20) | 1 |
| 33***80 | Tire; (650/65-26.5) | 1 |
345-2902 Tire & Rim Gp
| 33***19 | Wheel; (26.5x24) | 1 |
| 33***66 | Tire; (750/55-26.5) | 1 |
| 33***70 | Tube | 1 |
345-2381 Tire & Rim Gp -Front
| 33***22 | Wheel; (34x20) | 1 |
| 33***64 | Tire; (700/70-34) | 1 |
| 33***71 | Tube | 1 |
333-3830 Track Ar
| 33***30 | Track Ar | 1 |
| 34***89 | Track; (750/55-26.5)(Tire) | 2 |
333-3836 Track Ar -1-Required, Extreme Duty
| 33***36 | Track Ar; -1-Required, Extreme Duty | 1 |
| 34***90 | Track; (750/55-26.5)(Tire) | 1 |
333-3832 Track Ar -2-Required, Extreme Duty
| 33***32 | Track Ar; -2-Required, Extreme Duty | 1 |
| 34***90 | Track; (750/55-26.5)(Tire) | 2 |
333-3833 Track Ar -1-Required, Heavy Duty
| 33***33 | Track Ar; -1-Required, Heavy Duty | 1 |
| 34***88 | Track; (650/65-26.5)(Tire) | 1 |
333-3834 Track Ar -1-Required, Heavy Duty
| 33***34 | Track Ar; -1-Required, Heavy Duty | 1 |
| 34***89 | Track; (750/55-26.5)(Tire) | 1 |
333-3829 Track Ar -2-Required, Heavy Duty
| 33***29 | Track Ar; -2-Required, Heavy Duty | 1 |
| 34***88 | Track; (650/65-26.5)(Tire) | 2 |
333-3799 Transmission & Mounting Gp
| 33***99 | Transmission & Mounting Group | 1 |
| 33***51 | Transmission Group | 1 |
| 34***19 | Bolt-Flange Head; (M16x2x50-mm) | 6 |
333-8589 Transmission & Mounting Gp
| 33***45 | Transmission Group | 1 |
| 33***89 | Transmission & Mounting Group | 1 |
| 34***19 | Bolt-Flange Head; (M16x2x50-mm) | 6 |
333-3845 Transmission Gp
| 33***45 | Transmission Group | 1 |
| 34***39 | Gear Group-Transfer | 1 |
| 34***50 | Case Group-Transmission | 1 |
338-2951 Transmission Gp
| 33***51 | Transmission Group | 1 |
| 34***30 | Gear Group-Transfer | 1 |
| 34***50 | Case Group-Transmission | 1 |
338-3051 Valve Gp-Solenoid
| 12***14 | Kit-Seal | 1 |
| 12***54 | Kit-Seal | 1 |
| 33***51 | Valve Group-Solenoid | 1 |
Service Equipment And Supplies
333-3887 Box Gp-Tool
| 33***87 | Box Group-Tool | 1 |
333-7777 Plate & Film Gp
| 33***77 | Plate & Film Group | 1 |
Work Tools
333-3789 Blade Ar
| 09***97 | Washer, Spring | 4 |
| 13***12 | Washer-Spring | 30 |
| 18***83 | Nut-Hex Flange; (M12x1.75-Thd) | 4 |
333-3936 Blade Gp-Decking
| 20***26 | Guard-Hose; (123-cm Each) | 0 |
| 33***36 | Blade Group-Decking | 1 |
| 33***82 | Hose As | 2 |
333-7756 Gate Gp
| 20***26 | Guard-Hose; (123-cm Each) | 0 |
| 33***56 | Gate Group | 1 |
| 33***82 | Hose As | 2 |
333-3783 Grapple Ar
| 17***34 | Fitting | 1 |
| 18***16 | Fitting-Grease | 6 |
| 33***83 | Grapple Ar | 1 |
344-0392 Grapple Gp
| 34***92 | Grapple Group | 2 |
| 34***95 | Rotator Group-Hydraulic | 1 |
| 34***96 | Link Group-Grapple | 1 |
344-0399 Grapple Gp
| 33***71 | Lines Group-Log Loader | 1 |
| 34***99 | Grapple Group | 1 |
| 34***91 | Loader Group-Log | 1 |
344-0398 Grapple Gp
| 15***44 | Nut | 1 |
| 34***98 | Grapple Group | 1 |
| 35***12 | Damper | 1 |
344-0393 Grapple Gp
| 34***93 | Grapple Group | 2 |
| 34***95 | Rotator Group-Hydraulic | 1 |
| 34***96 | Link Group-Grapple | 1 |
333-3786 Grapple Gp
| 20***63 | Fitting-Grease | 6 |
| 33***86 | Grapple Group | 1 |
| 35***26 | Cylinder Group-Grapple | 1 |
344-0396 Link Gp-Grapple
| 33***71 | Lines Group-Log Loader | 1 |
| 33***36 | Loader Group-Log | 1 |
| 34***96 | Link Group-Grapple | 1 |
333-3779 Loader Ar-Log -8.5-M
| 33***79 | Loader Ar-Log; -8.5-M | 1 |
| 34***90 | Valve Group-Relief; (Log Loader) | 1 |
| 35***33 | Platform Group-Service | 1 |
333-3776 Loader Ar-Log -7.8-M
| 33***76 | Loader Ar-Log; -7.8-M | 1 |
| 34***90 | Valve Group-Relief; (Log Loader) | 1 |
| 34***91 | Valve-Relief | 2 |
345-2391 Loader Gp-Log
| 34***06 | Base | 1 |
| 34***08 | Plate | 1 |
| 34***44 | Flange | 1 |
338-3036 Loader Gp-Log
| 33***36 | Loader Group-Log | 1 |
| 35***11 | Fitting-Grease | 3 |
| 36***07 | Plate As | 1 |
357-5496 Lubrication Gp-Central
| 15***59 | Spring | 27 |
| 15***61 | Pin-Roll | 4 |
| 15***26 | Plug | 1 |
358-3135 Pillar Gp-Log Loader
| 34***15 | Bolt-Flange Head; (M12x1.75x25-mm) | 4 |
| 34***01 | Box As-Tool | 1 |
| 35***35 | Pillar Group-Log Loader | 1 |
344-0395 Rotator Gp-Hydraulic
| 11***95 | Film-Instruction; (Air Conditioner) | 1 |
| 15***64 | Film; (Instruction) (Hydraulic Oil) (On Forward Of And Above The Hydraulic Tank Sight Gage On Tank Surface) | 1 |
| 16***64 | Film-Instruction; (Cab Lift Pump) | 1 |
Frequently asked questions
What engine powers the Caterpillar 2748?
The 2748 is powered by a Caterpillar C7 industrial diesel, a turbocharged inline-six with a single turbocharger and dry exhaust manifold per the factory parts breakdown. Exact displacement and power ratings for this application are not published in any available spec sheet; confirm gross and net power along with emissions tier against the machine's own OMM or Cat SIS record for its PIN.
What is the operating weight of the Caterpillar 2748?
Operating weight is not published for the 2748 in any available Cat spec sheet, dealer brochure, or spec database. As a track-mounted forest products log loader with a dual heavy-duty undercarriage and a boom offered in 7.8 m or 8.5 m arm options, it falls in the same general size class as other C7-powered forestry swing machines, but a verified weight figure should come from your dealer or the machine's PIN-specific documentation.
What replaced the Caterpillar 2748?
No source documents a direct successor model for the 2748 by name. Cat's current forest machine lineup uses FM500-series naming (FM528 through FM568) for its general forestry and log loader machines, but no published record ties the 2748 specifically to any one of those as its replacement. Treat the FM-series log loader models as the closest current equivalent class and verify lineage with your Cat dealer if you need a documented replacement path.
What 2748 owners discuss
What engine problems come up most for C7-powered forest machines like the 2748?
The 2748 shares its water pump and core cooling hardware with the 2948 and 584, consistent with all three running the C7 diesel used across that Cat forestry lineup and in C7/C9-powered excavators of the same era. Owners of C7-powered equipment consistently point to HEUI (hydraulically actuated electronic unit injector) pump wear as the engine's weak spot: as the pump's internal thrust bearing wears, it sheds metal into the fuel and oil, and that debris migrates into the injectors, causing rough running, smoke, misfires and injector replacement across the bank rather than just one cylinder. Rising iron content on an oil sample is treated as the early warning sign. A related issue on early-build C7 engines involved fuel rail lines cracking at the fitting and weeping diesel, so a wet fuel line at the rail on an older unit is worth checking during PM. Have your dealer verify HEUI pump and injector condition with a fuel system pressure and return-flow test before committing to injector work.
Is overheating a known issue on this platform?
Cooling complaints tied to the C7 water pump shared across the 2748/2948/584 family come up repeatedly: pump seal weep, impeller wear and a sticking thermostat are the usual causes behind a forest machine running hot under sustained grapple and swing load. Because these machines work in dusty, bark-heavy environments, radiator fin packing and coolant contamination compound the problem faster than on equipment running a cleaner duty cycle. Regular fin cleaning and coolant sampling are treated as baseline preventive maintenance rather than optional extras. Have your dealer verify actual coolant flow and pump condition if temperatures run high under load, rather than assuming a plugged radiator is the only cause.
How do the swing bearing and swing drive hold up on a machine like this?
Across the log loader and swing-machine class generally, the swing bearing is treated as the single costliest wear item and the one most often ignored until it fails outright. Play in the bearing shows up as a knock or clunk on swing start and stop, and as visible rock in the upper structure relative to the undercarriage; technicians check it with a dial indicator at several points around the bearing rather than by eye alone. Shuttle valves that route pilot oil to the swing circuit are also known to stick, producing a hesitant or one-directional swing that mimics a bearing problem without being one. Have your dealer verify swing bearing bolt torque and measure bearing play before assuming a hydraulic cause for a rough swing.
What undercarriage wear pattern should owners expect?
Forestry duty cycles are harder on track undercarriage than typical excavator work: constant pivot turns under load, abrasive bark and dirt packing, and shock loading from uneven ground all accelerate bushing and pin wear compared with a machine doing finish grading. Sealed and lubricated bushing designs generally hold their wear life longer in this environment than non-sealed rotating-bushing designs, which is why sealed-type undercarriage is the common choice for forestry rebuilds. Owners are advised to plan a mid-life undercarriage inspection around the halfway point of expected chassis life rather than waiting for visible sag or a thrown track.
What hydraulic issues show up on the grapple and rotator end of these machines?
The grapple and rotator circuit is the part of the hydraulic system most likely to see abuse. Swinging a partially supported log, or dragging rather than lifting a bunched load, can spike circuit pressure well above hose and valve ratings, and that is the most commonly cited cause of blown hoses and rotator valve damage rather than a manufacturing defect. Hydraulic rotators are generally preferred over mechanical or cable-actuated grapple rotation on this class of machine because they put less torsional stress on the grapple casting. Have your dealer verify relief valve settings if a rotator or grapple cylinder is chewing through hoses repeatedly.
What about electrical and sensor faults?
Nothing specific to the 2748 by name turns up in the record, but the failure pattern reported across Cat forestry and excavator platforms of this era is consistent: intermittent no-starts and phantom fault codes trace back to worn harness runs, corroded connectors and chafed wiring at pivot points on the boom, swing frame and undercarriage far more often than to the sensors or ECM themselves. A weak battery or failing alternator is also a common root cause that gets misdiagnosed as a sensor fault because it triggers unrelated codes. Pulling stored codes and checking connector condition before swapping sensors is the standard first step technicians describe.
What should a buyer check before purchasing a used 2748?
This model has no public spec sheet or resale database, so buyers are working with less market data than on a mainstream excavator, which makes a hands-on inspection matter more. Check swing bearing play with a dial indicator, since any measurable movement is a red flag on a machine this size. Check articulation and boom pin condition for vertical misalignment or excess play under load. Check hydraulic hoses and fittings for weeping or chafe at the grapple and rotator end, where abuse shows first. Check undercarriage wear on both tracks, since forestry duty cycles wear these faster than typical excavator work. Pull an engine oil sample history if available, given the C7 HEUI pump's known wear pattern, and check coolant and water pump condition, since this engine family has a documented weak point there. Ask for service records and prior application history, since forestry production work is harder on the machine than yard or deck duty. Have your dealer verify swing bearing, undercarriage and engine condition with a full pre-purchase inspection before making a final offer.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 2748 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.