Caterpillarskid steer loader
Caterpillar 262C
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 262C is a large-frame, wheeled skid steer loader in Cat's C-Series lineup, slotted above the 246C/256C and below the 272C. It runs a Cat C3.4 DIT four-cylinder turbocharged diesel, rated near 82 net hp (61 kW) and up to 84 gross hp (63 kW) from 3.4 L displacement. Base operating weight sits around 3,615 kg (7,970 lb), with rated operating capacity of about 1,225 kg (2,700 lb) and tipping load near 2,450 kg (5,400 lb); actual weight shifts with tire choice, cab, and attachments. It followed the 262B into production and was later updated to a "Series 2" specification around 2012 with Tier 4 Interim emissions compliance. Cat offered it as a wheeled machine with one-speed or two-speed hydrostatic travel, standard (22 gpm/84 lpm) or high-flow (33 gpm/125 lpm) auxiliary hydraulics, and a vertical-lift boom geometry, with rubber-track conversion kits available for multi-terrain use.
The move from 262B to 262C brought a vertical-lift boom in place of the earlier radial-lift geometry, seat-mounted electrohydraulic joystick controls, and the C3.4 DIT engine, aimed at better truck-loading reach and cab comfort. The 2012 Series 2 update tightened emissions to Tier 4 Interim without a diesel particulate filter or SCR system, keeping the driveline simpler than the Tier 4 Final 262D that succeeded it with a C3.3B engine and full aftertreatment. In the used and parts market the 262C holds value because it predates that aftertreatment complexity, shares chain-case and hydrostatic wear parts across the 246C/256C/262C/272C family, and still delivers enough lift height and capacity for loading and material-handling jobs that don't need a compact track loader's flotation.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 262C specifications
Engine
| Engine model | Cat C3.4 DIT, 4-cylinder inline diesel with turbocharger and direct injection, liquid-cooled. Same base engine used on the 262C and the later 262C Series 2. |
| Gross power | 84 hp (63 kW) at 2500 rpm |
| Net power | 82 hp (61 kW) at 2500 rpm, SAE J1349 |
| Displacement | 3.4 L (207 cu in) |
| Cylinders | 4, inline |
| Emissions certification | Meets U.S. EPA Tier 4 Interim / EU Stage IIIA emission standards |
Weights
| Operating weight | 3,614-3,615 kg (7,968-7,970 lbs), standard configuration |
Dimensions
| Length, with bucket | 3.68 m (12.1 ft) |
| Length, without bucket | 2.97-3.12 m (9.75-10.25 ft) - figure varies by source/configuration |
| Width over tires | 1.68 m (5.5 ft) |
| Height to cab top | 2.08-2.10 m (6.83-6.9 ft) |
| Wheelbase | 1.24 m (4.07 ft) |
| Ground clearance | 224 mm (8.81 in) |
| Maximum lift height (hinge pin) | 3,235 mm (127 in / 10.6 ft) |
| Maximum dump height | 2,450 mm (96.4 in) |
| Standard tire size | 12.00 x 16.5 |
Performance
| Rated operating capacity | 1,225 kg (2,700 lbs), 50% of tipping load |
| Rated operating capacity (alternate rating) | 857 kg (1,890 lbs), 35% of tipping load |
| Tipping load | 2,450 kg (5,400 lbs) |
| Breakout force | 3,320 kg (7,315 lbs) |
| Travel speed, standard | 12.4 km/h (7.7 mph) |
| Travel speed, two-speed option | 19.3 km/h (12.0 mph) |
| Hydraulic pump flow, standard | 84 L/min (22 gpm) |
| Hydraulic pump flow, high-flow option | 125 L/min (33 gpm) |
| Hydraulic system relief pressure | 230 bar (3,335 psi) |
Service capacities (summary)
| Fuel tank | 98 L (26 gal) |
| Hydraulic system | 42 L (11 gal) reservoir; approximately 57 L (15 gal) total system refill including lines and cylinders |
| Engine oil | 9.8-10 L (2.6 gal) |
| Cooling system | 14.0 L (3.7 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
262C fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with oil filter) | 10.0 L (2.6 US gal) | Cat DEO diesel engine oil, SAE 10W-30 or 15W-40 multigrade; API CE, CF-4, CG-4, or CH-4 service category. Pick viscosity by ambient temperature per the OMM cold-start/climate chart. |
| Cooling system | 14.0 L (3.7 US gal) | Caterpillar Diesel Engine Antifreeze/Coolant (DEAC), factory premix. Service on Cat's standard cooling-system interval; do not mix coolant types. |
| Fuel tank | 98.0 L (26.0 US gal) | No. 2-D ultra-low-sulfur diesel per Cat's diesel fuel spec. Use a winter blend or anti-gel additive in cold climates. |
| Drive chaincase (chain-drive compartments, both sides combined) | 10.0 L (2.6 US gal) | Cat DEO diesel engine oil, SAE 15W-40 or 5W-40 multigrade - same fluid spec as the engine crankcase, shared fill. |
| Hydraulic system, total (pump, lines, cylinders, and tank) | 57.0 L (15.0 US gal) | Cat DEO diesel engine oil, SAE 15W-40 or 5W-40 multigrade. This machine runs the hydraulics on the same engine-oil-spec fluid rather than a dedicated hydraulic oil; pick viscosity by climate per the OMM chart. |
| Hydraulic tank (reservoir only) | 42.0 L (11.0 US gal) | Same fluid as the hydraulic system - Cat DEO, SAE 15W-40 or 5W-40. |
| Grease (all fittings - lift-arm pins, cylinder pins, pivots) | Not a refill volume - service each grease point on the OMM's lubrication interval | Cat Multipurpose Grease, NLGI Grade 2, EP/moly-fortified for shock-loaded pins. An equivalent NLGI 2 EP moly grease works if Cat-brand isn't on hand; use an arctic-grade grease in sub-zero climates. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 262C maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 3,000 h |
|
Servicing the 262C beyond the schedule
Predictive Maintenance & Fluid Analysis
Pull hydraulic oil samples at every filter change and watch for metallic glitter in the element - an early flag for hydrostatic pump or wheel-motor wear on the 262C's drive circuit. Sample C3.4 DIT engine oil around 500-hour intervals to track soot loading and turbo wear before it shows up as blue smoke or power loss. Check chain-case oil for water intrusion after wet-site work, and log hydrostatic charge pressure at each scheduled service to catch drive weakness early.
Corrective & Common Repairs
Uneven wheel drive or intermittent power loss on the 262C usually traces to joystick wiring harness connectors or a blocked or leaking hydraulic control valve feeding a wheel motor - check connections before condemning the pump. Sluggish travel in second (high) range often means air trapped in the hydrostatic circuit; flush and bleed the system rather than replacing parts. Confirm main hydrostatic pump output pressure and flow with a test kit before swapping a wheel motor.
Overhaul & Rebuild Points
At high hours, the hydrostatic pump and wheel motors are the 262C's major rebuild items - plan the work once repeated pressure and flow tests trend down, rather than waiting for a stall. Chain cases wear at the sprockets and chains together; replace both as a set so a new chain doesn't stretch fast over worn teeth. Lift and tilt cylinder seals and the turbocharger on the C3.4 DIT round out the common overhaul points once the machine passes several thousand hours.
Seasonal & Environment Servicing
Before winter, verify coolant concentration protects to the expected low temperature and confirm the block heater and glow plug circuit on the C3.4 DIT work - this engine can be hard to start cold without both. Switch to a lower-viscosity hydraulic fluid grade for cold-weather operation and back to summer grade in heat. In dusty or sandy environments, shorten primary air filter cleaning well below the 250-hour mark, and check chain cases more often for water intrusion after wet or muddy work.
262C common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 110-6326 | Filter Element As-Air | Air intake service | Check fitment → |
| 110-6331 | Filter Element As-Air | Air intake service | Check fitment → |
| 265-6618 | Filter Element-Cab Air | Air intake service | Check fitment → |
| 265-6619 | Filter Element-Cab Air | Air intake service | Check fitment → |
| 1G-8878 | Filter As-Oil | Hydraulic service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
262C fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 2475-3 | Right joystick forward/reverse position sensor circuit, signal voltage above normal range. | Open sensor return circuit, open signal circuit, signal circuit shorted to sensor supply, or a failed PWM position sensor in the joystick base. | Inspect the joystick base connector and harness for corrosion or damage, check sensor supply and return continuity with a duty-cycle capable meter, then recalibrate or replace the sensor. |
| 2477-3 | Right joystick left/right position sensor circuit, signal voltage above normal range. | Same failure pattern as the paired forward/reverse sensor: open power, return, or signal wiring, or a failed PWM sensor in the joystick base. | Check connector pins for corrosion, verify sensor duty-cycle output at center and full travel, repair the harness or replace the sensor as needed. |
| 2204-3 | Auxiliary lever (right joystick thumb rocker) position sensor #1 circuit, signal voltage above normal range. | Open sensor power supply, open return wire, disconnected or open signal wire, or the signal wire shorted to sensor supply voltage. | Trace and repair the thumb-rocker harness at the right joystick base, confirm sensor power and ground, replace the sensor if it fails a duty-cycle test. |
| 2204-4 | Auxiliary lever (right joystick thumb rocker) position sensor #1 circuit, signal voltage below normal range. | Sensor supply wire open, signal circuit shorted to ground, or a failed sensor. | Check supply voltage at the sensor connector, inspect for a grounded signal wire, replace the sensor once wiring checks out good. |
| 2004-8 | Auxiliary lever #1 position sensor, abnormal signal frequency, pulse width, or period. | Intermittent connector contact, a damaged PWM sensor, or electrical noise on the signal circuit. | Clean and reseat the joystick connector, inspect harness routing for chafe points, replace the sensor if the fault stays active after wiring repair. |
| 2685-8 | Left drive (traction) motor speed sensor, abnormal signal frequency, pulse width, or period; can accompany an unexpected drive-motion warning. | Damaged sensor or harness, a loose connector, or debris on the sensor tip; the left-side assembly houses two sensors in one body and both often fault together. | Inspect and reseat the speed sensor connector, check wiring for pinch or ground damage, replace the sensor pair if readings stay erratic. |
| 2686-8 | Left drive (traction) motor speed sensor #2 (second sensor in the same left-side housing), abnormal signal frequency, pulse width, or period. | Same housing and harness as the paired sensor: connector corrosion, chafed wiring, or a failed sensor element. | Check the shared connector and harness run for damage, test sensor output, replace the sensor pair as a set if one has failed. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
262C attachments & work tools
General-purpose & utility buckets
Standard work tool for this frame size is a general-purpose/dirt bucket sized to roughly match overall machine width, about 1.68 m (66 in), with heaped capacity reported around 0.46 m3 (0.6 yd3). Utility and light-material bucket profiles are also offered for this class; actual heaped capacity varies by bucket style and material density.
Multi-purpose (4-in-1) and grapple buckets
4-in-1 combination buckets and grapple-equipped buckets with a clam-style jaw are offered for this loader class, used for grading, light dozing, and picking up loose or bulky material. Opening and closing the clam draws off the machine's auxiliary hydraulic circuit.
Pallet forks
Fork carriages for this frame size commonly use tine lengths in the 0.9-1.2 m (36-48 in) range, with frame lift capacity matched to loaders in this operating-capacity class. Rated fork capacity depends on the specific tine length and carriage selected, not one fixed figure.
Grapples
Industrial and utility grapple forks are offered for this frame size to handle brush, scrap, rock, and bulky debris. These are hydraulically actuated and run off the machine's continuous-flow auxiliary circuit through the standard flat-faced quick disconnects.
Augers
Auger drive units for this loader class come in direct-drive and planetary-drive configurations, with torque output roughly in the 1,700-3,000+ ft-lb (2,300-4,100+ N*m) range depending on drive type. Higher-torque planetary units are better suited to the optional High Flow XPS hydraulic system.
Brooms
Angle, pickup, and utility broom attachments are offered for this frame size. Angle brooms sweep along edges and buildings, pickup brooms use a gutter brush and hopper to collect debris, and utility brooms are built for heavier-duty sweeping; all run off auxiliary hydraulics.
Blades and grading tools
Grading/dozer-style blades and cutting-edge equipped buckets are offered for this frame size for fine grading, backfilling, and snow pushing. These are largely mechanical (angle/tilt via cylinder) rather than high-flow hydraulic tools.
Quick coupler / mounting system
The loader ships with a factory choice of mechanical or hydraulic quick coupler, listed as mandatory equipment at order time. Both coupler types use the industry-standard universal skid-steer mounting plate shared across major OEM and aftermarket work tools; the hydraulic coupler lets the operator connect auxiliary hose lines from the cab without dismounting.
Hydraulic flow class (Standard vs High Flow XPS)
Standard loader hydraulics deliver about 84 L/min (22 gal/min) at roughly 23,000 kPa (3,335 psi). An optional High Flow XPS system raises flow to about 125 L/min (33 gal/min) at up to 28,000 kPa (4,061 psi), intended for higher-demand tools such as planetary augers, mulchers, and cold planers. The auxiliary circuit uses continuous-flow plumbing with heavy-duty flat-faced quick disconnects and reinforced hose as standard.
Factory configuration and guarding options
An optional counterweight adds about 90 kg (200 lb) to rated operating capacity to help offset heavier front-mounted tools such as forks or grapples. Work tool hoses route along the left lift arm through a guide to reduce wear and snagging, and a cold-operation hydraulic oil option is offered for tool use in low-temperature conditions.
All 262C assemblies by section
Every catalogued assembly group for the Caterpillar 262C. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
258-3320 Air Cleaner Gp
| 14***32 | Pin As | 1 |
| 17***55 | Pin | 2 |
| 20***76 | Stud-Ball | 4 |
258-3453 Air Cleaner Gp
| 25***53 | Air Cleaner Group | 1 |
| 28***66 | Bolt; (M8x1.25x65-mm) | 1 |
| 33***17 | Pump Group-Water | 1 |
280-8294 Air Cleaner Gp
| 28***94 | Air Cleaner Group | 1 |
| 28***66 | Bolt; (M8x1.25x65-mm) | 1 |
| 31***89 | Adapter | 1 |
280-8393 Guard Gp-Debris -Turbocharger, Exhaust Manifold
| 10***47 | Cover-Pump | 1 |
| 19***60 | Plug | 1 |
| 28***93 | Guard Group-Debris; -Turbocharger, Exhaust Manifold | 1 |
272-3062 Kit-Debris Guard -Turbocharger, Exhaust Manifold
| 03***65 | Cap As-Radiator; (Sea Water Heat Exchanger) | 1 |
| 06***80 | Fitting | 1 |
| 12***52 | Spacer; (10.5x20x28-mm Thk) | 1 |
280-8392 Kit-Debris Guard -Turbocharger, Exhaust Manifold
| 11***26 | Filter Element As-Air; (Primary) | 1 |
| 11***31 | Filter Element As-Air; (Secondary) | 1 |
| 11***17 | Valve-Dust; (Air Cleaner) | 1 |
258-2465 Lines Gp-Air
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 2 |
| 13***43 | Clamp-Hose | 1 |
| 25***65 | Lines Group-Air | 1 |
316-0471 Lines Gp-Air
| 27***52 | Guard-Exhaust; (Manifold) | 1 |
| 28***55 | Guard As-Exhaust; (Turbocharger) | 1 |
| 31***71 | Lines Group-Air | 1 |
315-7769 Lines Gp-Air
| 28***55 | Guard As-Exhaust; (Turbocharger) | 1 |
| 28***91 | Flange, Guard-Exhaust; (Manifold) | 1 |
| 31***69 | Lines Group-Air | 1 |
247-6317 Lines Gp-Air
| 15***98 | Band-Mounting | 1 |
| 23***25 | Indicator | 1 |
| 24***17 | Lines Group-Air | 1 |
287-5323 Manifold Gp-Exhaust
| 28***55 | Guard As-Exhaust; (Turbocharger) | 1 |
| 28***91 | Flange, Guard-Exhaust; (Manifold) | 1 |
| 28***23 | Manifold Group-Exhaust | 1 |
287-4832 Manifold Gp-Inlet
| 28***32 | Manifold Group-Inlet | 1 |
| 5I***78 | Gasket | 1 |
| 5I***21 | Elbow Assem. | 1 |
335-5750 Manifold Gp-Inlet
| 25***64 | Hose As | 1 |
| 33***50 | Manifold Group-Inlet | 1 |
| 5P***68 | Clamp-Hose; (Us Sourced) | 1 |
280-8347 Muffler & Mounting Gp
| 19***22 | Bolt As; (M8x1.25x22-mm) | 4 |
| 27***82 | Clip | 2 |
| 28***47 | Muffler & Mounting Group | 1 |
258-2462 Muffler & Mounting Gp
| 09***00 | Washer; (1.5mm Thk) | 2 |
| 25***12 | Clip | 1 |
| 25***62 | Muffler & Mounting Group | 1 |
315-7768 Turbocharger Gp
| 19***60 | Nut; (M8x1.25-Thd) | 8 |
| 23***60 | Bolt | 8 |
| 23***24 | Gasket-Manifold | 1 |
235-5894 Turbocharger Gp
| 23***37 | Clip-Hose | 1 |
| 23***94 | Turbocharger Group | 1 |
| 25***12 | Clip | 1 |
Basic Engine
323-2009 Accessory Gp-Engine
| 32***09 | Accessory Group-Engine | 1 |
| 34***61 | Kit-Gasket | 1 |
292-4041 Bearing Gp-Main
| 10***88 | Plate-Thrust; (Standard) | 3 |
| 10***89 | Plate-Thrust; (0.15-mm Os) | 0 |
| 10***90 | Plate-Thrust; (0.35-mm Os) | 0 |
233-5473 Camshaft Gp
| 09***28 | Key | 1 |
| 10***72 | Tappet | 8 |
| 10***73 | Rod-Push | 8 |
314-9835 Camshaft Gp
| 09***28 | Key | 1 |
| 10***72 | Tappet | 8 |
| 10***73 | Rod-Push | 8 |
287-4033 Connecting Rod Gp
| 10***80 | Rod As-Connecting | 4 |
| 12***55 | Bolt-Connecting Rod | 2 |
| 12***56 | Nut | 2 |
315-7762 Cover Gp-Valve Mechanism
| 09***49 | Bolt; (M8x1.25x40-mm) | 5 |
| 23***83 | Gasket; (Valve Cover) | 1 |
| 31***98 | Cap-Oil Filler; (Engine) | 1 |
233-5480 Cover Gp-Valve Mechanism
| 23***80 | Cover Group-Valve Mechanism | 1 |
| 23***83 | Gasket; (Valve Cover) | 1 |
| 31***98 | Cap-Oil Filler; (Engine) | 1 |
287-4649 Crankshaft Gp
| 08***13 | Pin | 2 |
| 09***28 | Key | 2 |
| 13***96 | Nut | 1 |
314-9860 Crankshaft Gp
| 08***13 | Pin | 2 |
| 09***28 | Key | 2 |
| 13***96 | Nut | 1 |
315-8330 Cylinder Block Gp
| 09***41 | Cap | 10 |
| 09***20 | Pin | 2 |
| 10***76 | Bolt-Bearing Cap | 10 |
287-2416 Cylinder Block Gp
| 09***41 | Cap | 4 |
| 09***20 | Pin | 2 |
| 10***62 | Bushing | 1 |
233-5500 Cylinder Head Gp
| 09***20 | Pin | 2 |
| 10***62 | Bushing | 1 |
| 10***76 | Bolt-Bearing Cap | 10 |
315-7760 Cylinder Head Gp
| 21***75 | Cap | 7 |
| 23***53 | Cylinder Head | 1 |
| 23***54 | Bolt; (M12x1.75x115-mm) | 17 |
258-2452 Drain Gp-Engine Oil
| 10***46 | Bolt-Cylinder Head | 17 |
| 10***47 | Guide-Valve | 8 |
| 10***52 | Seat-Valve; (Inlet) | 4 |
314-9861 Flywheel Gp
| 11***70 | Cap | 1 |
| 1P***78 | Clamp; (Hose) | 1 |
| 31***61 | Flywheel Group | 1 |
235-5890 Flywheel Gp
| 11***70 | Cap | 1 |
| 1P***78 | Clamp; (Hose) | 1 |
| 21***19 | Adapter | 1 |
287-4830 Gear Gp-Front
| 03***39 | Gear-Starter; (112-Teeth) | 1 |
| 22***93 | Bolt; (M12x1.25x30-mm) | 4 |
| 23***91 | Flywheel As | 1 |
315-7766 Gear Gp-Front
| 03***39 | Gear-Starter; (112-Teeth) | 1 |
| 22***93 | Bolt; (M12x1.25x30-mm) | 6 |
| 23***91 | Flywheel As | 1 |
258-2469 Guard Gp-Belt
| 11***27 | Gear; (46-Teeth) | 1 |
| 11***29 | Gear; (23-Teeth) | 1 |
| 11***83 | Gear As-Idler; (49-Teeth) | 1 |
280-8407 Guard Gp-Belt
| 11***27 | Gear; (46-Teeth) | 1 |
| 11***29 | Gear; (23-Teeth) | 1 |
| 11***85 | Gear-Pump; (Oil, 31-Teeth) | 1 |
287-3357 Housing Gp-Flywheel
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 4 |
| 13***22 | Bolt-Locking; (M8x1.25x16-mm) | 2 |
| 25***43 | Guard-Belt | 1 |
315-7764 Housing Gp-Flywheel
| 13***22 | Bolt-Locking; (M8x1.25x16-mm) | 2 |
| 28***07 | Bracket As | 1 |
| 28***14 | Bracket As | 1 |
287-3074 Housing Gp-Front
| 09***15 | Lockwasher | 2 |
| 10***80 | Gasket-Rear | 1 |
| 11***15 | Seal As-Oil | 1 |
315-8336 Housing Gp-Front
| 10***80 | Gasket-Rear | 1 |
| 11***15 | Seal As-Oil | 1 |
| 14***17 | Bolt; (M10x1.25x25-mm) | 10 |
287-1844 Lifting Gp-Engine
| 09***29 | Seal-O-Ring (Id=139.5mm); (Id=139.50mm) | 1 |
| 10***77 | Gasket-Front Plate | 1 |
| 11***47 | Gasket; (Gear Case) | 1 |
315-7761 Lifting Gp-Engine
| 09***00 | Washer; (1.5mm Thk) | 2 |
| 09***29 | Seal-O-Ring (Id=139.5mm); (Id=139.50mm) | 1 |
| 19***12 | Bolt; (M6x1x18-mm) | 4 |
258-2447 Mounting Gp-Engine
| 09***29 | Seal-O-Ring (Id=139.5mm); (Id=139.50mm) | 1 |
| 10***77 | Gasket-Front Plate | 1 |
| 11***47 | Gasket; (Gear Case) | 1 |
335-5772 Pan Gp-Oil
| 16***01 | Sealant-Silicone | 0 |
| 19***03 | Bolt As | 1 |
| 23***11 | Washer | 1 |
315-7765 Pan Gp-Oil
| 11***90 | Mount As | 2 |
| 12***80 | Locknut; (M12x1.75-Thd) | 1 |
| 14***88 | Mount-Engine | 2 |
287-3921 Pan Gp-Oil
| 19***05 | Bolt As | 4 |
| 23***66 | Eye | 1 |
| 23***68 | Gasket; (Rear Head) | 1 |
235-5889 Piston Gp
| 09***82 | Gasket, Oil Drain | 1 |
| 13***32 | Plug; (Drain, Engine Oil) | 1 |
| 16***01 | Sealant-Silicone | 1 |
314-9855 Piston Gp
| 09***82 | Gasket, Oil Drain | 1 |
| 13***32 | Plug; (Drain, Engine Oil) | 1 |
| 16***01 | Sealant-Silicone | 1 |
287-2983 Plug Gp-Engine
| 09***82 | Gasket, Oil Drain | 1 |
| 13***32 | Plug; (Drain, Engine Oil) | 1 |
| 16***01 | Sealant-Silicone | 1 |
287-2922 Plug Gp-Engine
| 09***82 | Gasket, Oil Drain | 1 |
| 13***32 | Plug; (Drain, Engine Oil) | 1 |
| 16***01 | Sealant-Silicone | 1 |
301-3396 Pulley Gp-Crankshaft
| 23***15 | Pin-Piston | 4 |
| 25***38 | Ring-Snap | 8 |
| 30***96 | Pulley Group-Crankshaft | 1 |
287-4749 Pulley Gp-Crankshaft
| 22***04 | Set-Piston Ring; (Standard) | 4 |
| 23***14 | Piston; (Standard) | 4 |
| 23***15 | Pin-Piston | 4 |
287-6114 Pulley Gp-Water Pump
| 28***14 | Pulley Group-Water Pump | 1 |
| 5I***05 | Plug | 6 |
287-6138 V-Belt Gp
| 19***11 | Plug | 1 |
| 28***38 | V-Belt Group; -Water Pump | 1 |
235-5880 Valve Mechanism Gp
| 23***80 | Valve Mechanism Group | 1 |
| 28***48 | Pulley-Crankshaft | 1 |
Cooling System
314-9900 Cooler Gp-Engine Oil
| 09***37 | Seal-O-Ring | 1 |
| 09***71 | Seal-O-Ring (Id=94.40mm) | 1 |
| 1R***34 | Filter-Engine Oil | 1 |
235-5896 Cooler Gp-Engine Oil
| 09***37 | Seal-O-Ring | 1 |
| 09***71 | Seal-O-Ring (Id=94.40mm) | 1 |
| 1R***34 | Filter-Engine Oil | 1 |
315-7763 Drain Gp-Coolant
| 10***25 | Valve As; (Oil Bypass)(Engine) | 1 |
| 23***96 | Gasket | 1 |
| 23***96 | Gasket | 1 |
292-4040 Drain Gp-Coolant
| 10***44 | Nut | 1 |
| 10***83 | Seal-O-Ring | 1 |
| 11***41 | Pump As-Oil | 1 |
315-8355 Housing & Regulator Gp
| 09***13 | Seal-O-Ring | 4 |
| 09***21 | Plug | 2 |
| 19***22 | Bolt As; (M8x1.25x22-mm) | 11 |
235-5900 Lines Gp-Water
| 09***13 | Seal-O-Ring | 4 |
| 09***21 | Plug | 2 |
| 19***35 | Bolt; (M8x1.25x22-mm) | 13 |
258-3552 Lines Gp-Water -Radiator
| 09***13 | Seal-O-Ring | 4 |
| 09***21 | Plug | 2 |
| 23***98 | Stud | 1 |
258-3542 Mounting Gp-Rad & Oil Cooler
| 23***78 | Valve As-Drain | 1 |
| 25***42 | Mounting Group-Rad & Oil Cooler | 1 |
| 32***33 | Adapter | 1 |
335-9117 Pump Gp-Water
| 16***15 | Cap-Vented; (Coolant Recovery Tank) | 1 |
| 1P***78 | Clamp; (Hose) | 2 |
| 22***78 | Clamp-Tbolt; (M5x0.8) | 4 |
315-7770 Pump Gp-Water
| 09***75 | Bolt; (25-mm Long) | 2 |
| 23***31 | Cover | 1 |
| 23***59 | Gasket; (Water Temperature Regulator) | 1 |
287-6056 Pump Gp-Water
| 09***75 | Bolt; (25-mm Long) | 2 |
| 23***09 | Washer-Special | 1 |
| 23***31 | Cover | 1 |
258-3459 Radiator & Hyd Oil Cooler Gp
| 14***32 | Pin As | 1 |
| 17***55 | Pin | 2 |
| 20***76 | Stud-Ball | 4 |
Electrical And Starting System
105-2814 Alternator Gp-Charging
| 10***14 | Alternator Group-Charging | 1 |
| 21***10 | Nut | 1 |
| 22***43 | Gasket | 1 |
287-6361 Alternator Gp-Charging
| 14***17 | Bolt; (M10x1.25x25-mm) | 1 |
| 19***56 | Clip | 1 |
| 19***33 | Bolt | 1 |
315-8353 Alternator Gp-Charging
| 14***17 | Bolt; (M10x1.25x25-mm) | 1 |
| 19***56 | Clip | 1 |
| 19***33 | Bolt | 2 |
258-4121 Battery & Wiring Gp
| 11***01 | Bowl As-Water Collection | 1 |
| 11***18 | Ring-Retaining | 1 |
| 12***14 | Kit-Seal; (Water Separator) | 1 |
310-5289 Control Gp-Machine
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 25***40 | Tank Group-Fuel | 1 |
258-4144 Cover Gp-Fuse Panel
| 00***64 | Seal-O-Ring | 1 |
| 14***28 | Elbow | 1 |
| 23***37 | Fitting | 1 |
258-4103 Electronics Gp-Machine
| 11***58 | Pulley-Alternator | 1 |
| 11***59 | Frame As-Alternator | 1 |
| 11***60 | Rotor As-Alternator | 1 |
347-4187 Electronics Gp-Monitor
| 10***14 | Alternator Group-Charging | 1 |
| 23***62 | Plate | 1 |
| 23***73 | Bolt; (M10x1.5x90-mm) | 1 |
347-4186 Electronics Gp-Monitor -Monitor
| 10***14 | Alternator Group-Charging | 1 |
| 23***62 | Plate | 1 |
| 23***73 | Bolt; (M10x1.5x90-mm) | 1 |
235-5904 Glow Plug Gp
| 23***62 | Plate | 1 |
| 23***73 | Bolt; (M10x1.5x90-mm) | 1 |
| 23***04 | Glow Plug Group | 1 |
218-0943 Heater Gp-Jacket Water
| 03***05 | Terminal-Cable; (00-Ga, 5/16-In Screw) | 1 |
| 11***16 | Block | 1 |
| 1P***10 | Tape (Order By The Meter) (Use As | 0 |
218-0942 Heater Gp-Jacket Water
| 10***14 | Alternator Group-Charging | 1 |
| 21***42 | Heater Group-Jacket Water | 1 |
| 23***62 | Plate | 1 |
258-4145 Kit-Control Mounting -Product Link
| 25***45 | Kit-Control Mounting; -Product Link | 1 |
| 31***72 | Module Group-Interface; (Key) | 1 |
| 6V***15 | Screw-Pan Head; (4-20x0.25-In) | 1 |
258-4185 Kit-Security
| 11***71 | Puller-Minifuse | 1 |
| 25***27 | Screw-Truss Head; (No 12x17.46-mm) | 2 |
| 25***37 | Film-Fuse Panel | 1 |
328-2366 Kit-Wiring Harness -Accugrade
| 22***41 | Element As-Jacket Water Heater; (120-Volt, 530-Watt) | 1 |
| 22***42 | Heater Group-Jacket Water | 1 |
| 23***03 | Gasket | 1 |
258-4127 Kit-Work Tool Wiring
| 13***17 | Cap As-Dust | 1 |
| 21***12 | Cord As | 1 |
| 22***35 | Element As-Jacket Water Heater; (240-Volt, 530-Watt) | 1 |
234-4328 Lamp Gp-Flood
| 15***28 | Spacer; (7x16x20-mm Thk) | 4 |
| 23***28 | Lamp Group-Flood; -Front, Rear, Wide Range | 1 |
| 25***27 | Screw-Truss Head; (No 12x17.46-mm) | 9 |
195-0190 Lamp Gp-Head & Signal -Lh-High, Low Beam
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***17 | Tape; (5.5m) | 0 |
195-0189 Lamp Gp-Head & Signal -Rh-High, Low Beam
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***17 | Tape; (5.5m) | 0 |
128-6985 Lamp Gp-Warning Beacon -Amber, Magnetic Mount, Rotating
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 0 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 2 |
309-1325 Lamp Gp-Warning Beacon -Amber
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***39 | Relay As | 3 |
258-4164 Lighting Gp-Flood -Work Lights, Front
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 20***14 | Lens As; (Floodlight) | 1 |
| 23***30 | Body As; (Floodlight) | 1 |
333-4957 Lighting Gp-Roading -Rear
| 10***53 | Case, Spacer; (Spherical) | 1 |
| 10***54 | Spacer; (Spherical) | 1 |
| 10***55 | Washer; (Spherical) | 1 |
258-4130 Lighting Gp-Roading -Head, Signal, Stop, Tail
| 10***53 | Case, Spacer; (Spherical) | 1 |
| 10***54 | Spacer; (Spherical) | 1 |
| 10***55 | Washer; (Spherical) | 1 |
258-4169 Lighting Gp-Stop & Tail
| 25***69 | Lighting Group-Stop & Tail | 1 |
| 9R***42 | Plug As | 1 |
| 9R***58 | Cord As | 1 |
258-4184 Lighting Gp-Warning Beacon -Amber, Magnetic Mount, Rotating
| 25***84 | Lighting Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 27***00 | Lens; (Amber)(Warning Beacon) | 1 |
| 9R***42 | Plug As | 1 |
292-1271 Mast Gp -Accugrade Laser
| 23***28 | Lamp Group-Flood; -Front, Rear, Wide Range | 2 |
| 29***71 | Mast Group; -Accugrade Laser | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
258-4135 Relay Gp -Main Power
| 08***48 | Lamp; (12-Volt, 5-Watt) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
160-2443 Sensor Gp-Position
| 08***48 | Lamp; (12-Volt, 5-Watt) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
266-1467 Sensor Gp-Position -Rotary
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 16***95 | Lens | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
262-3764 Sensor Gp-Speed
| 24***97 | Cable-Coiled; (Sensor) | 1 |
| 25***29 | Receiver Group-Laser; (Lr410) | 1 |
| 25***29 | Case-Carrying | 1 |
191-8303 Sensor Gp-Speed
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 19***03 | Sensor Group-Speed | 1 |
238-8277 Sensor Gp-Temp & Press -Engine
| 1H***44 | Lockwasher (Bracket To Cab) | 2 |
| 23***77 | Sensor Group-Temp & Press; -Engine | 1 |
| 26***80 | Fuse; (20-Ampere)(Main) | 1 |
143-0539 Starting Motor Gp-Electric
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 14***39 | Starting Motor Group-Electric; -12-Volt | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
287-6181 Starting Motor Gp-Electric
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 3 |
| 28***81 | Starting Motor Group-Electric | 1 |
300-1071 Switch Gp-Pressure
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 17***49 | Strap; (Marker) | 1 |
| 30***71 | Switch Group-Pressure; -Engine Oil | 1 |
258-4100 Wiring Gp-Cab
| 23***74 | Switch-Temperature; (Engine Coolant, Cold Start) | 1 |
| 25***00 | Wiring Group-Cab | 1 |
| 32***52 | Switch-Oil Press; (Engine) | 1 |
258-4115 Wiring Gp-Engine
| 10***85 | Cap-Starting Motor | 1 |
| 10***12 | Kit-Contact; (Starting Motor) | 1 |
| 10***13 | Switch As; (Starting Motor)(12-Volt) | 1 |
258-4192 Wiring Gp-Engine -Battery
| 14***39 | Starting Motor Group-Electric; -12-Volt | 1 |
| 25***92 | Wiring Group-Engine; -Battery | 1 |
336-0913 Wiring Gp-Grade Control
| 32***52 | Switch-Oil Press; (Engine) | 1 |
| 33***13 | Wiring Group-Grade Control | 1 |
258-4146 Wiring Gp-Heater
| 10***74 | Seal-Connector | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
258-4107 Wiring Gp-Machine
| 10***05 | Cap-Receptacle | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
258-4190 Wiring Gp-Quick Coupler
| 03***12 | Terminal-Ring; (2-Ga, 1/4-In Screw)(Circuit Breaker) | 1 |
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
258-4125 Wiring Gp-Work Tool
| 03***12 | Terminal-Ring; (2-Ga, 1/4-In Screw)(Circuit Breaker) | 1 |
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
Engine Arrangement
295-7114 Engine Ar
| 28***74 | Engine Ar-Primary | 1 |
| 29***14 | Engine Ar | 1 |
| 31***06 | Engine Ar-Primary | 1 |
258-2518 Engine Ar
| 25***18 | Engine Ar | 1 |
| 26***89 | Engine Ar-Primary | 1 |
262-7289 Engine Ar-Primary
| 23***73 | Camshaft Group | 1 |
| 23***80 | Cover Group-Valve Mechanism | 1 |
| 23***00 | Cylinder Head Group | 1 |
319-6806 Engine Ar-Primary
| 23***80 | Valve Mechanism Group | 1 |
| 23***95 | Pump Group-Engine Oil | 1 |
| 23***04 | Glow Plug Group | 1 |
287-8074 Engine Ar-Primary
| 23***80 | Valve Mechanism Group | 1 |
| 23***95 | Pump Group-Engine Oil | 1 |
| 23***04 | Glow Plug Group | 1 |
295-7118 Installation Ar-Engine
| 25***47 | Mounting Group-Engine | 1 |
| 25***52 | Drain Group-Engine Oil | 1 |
| 25***65 | Lines Group-Air | 1 |
258-2445 Installation Ar-Engine
| 25***45 | Installation Ar-Engine | 1 |
| 25***47 | Mounting Group-Engine | 1 |
| 25***52 | Drain Group-Engine Oil | 1 |
Frame And Body
258-3804 Conversion Ar-Roading -Italy
| 25***04 | Conversion Ar-Roading; -Italy | 1 |
| 31***28 | Tire; (33x6x10) | 4 |
258-3802 Conversion Ar-Roading -Germany
| 22***34 | Tire-Solid; (33x6x11)(Rh) | 2 |
| 22***35 | Tire-Solid; (33x6x11)(Rh) | 2 |
| 25***02 | Conversion Ar-Roading; -Germany | 1 |
258-3800 Conversion Ar-Roading -Nacd
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 22***34 | Tire-Solid; (33x6x11)(Rh) | 2 |
| 22***35 | Tire-Solid; (33x6x11)(Rh) | 2 |
258-3840 Conversion Gp-Roading -Germany
| 25***62 | Muffler & Mounting Group | 1 |
| 25***79 | Motor & Mtg Group-Hydraulic Fan | 1 |
| 25***40 | Conversion Group-Roading; -Germany | 1 |
258-3841 Conversion Gp-Roading -Italy
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 25***79 | Motor & Mtg Group-Hydraulic Fan | 1 |
258-2591 Counterweight Gp
| 17***16 | Chock | 1 |
| 25***91 | Counterweight Group | 1 |
| 25***33 | Film-Notice; (Steering) | 1 |
322-1644 Door As-Access -Vented
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 12***54 | Fastener; (Loop) (22cm) (X3) | 0 |
258-2594 Enclosure Gp-Engine
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***54 | Fastener; (Loop) (22cm) (X3) | 0 |
| 12***55 | Fastener-Hook; (18-cm Each) | 0 |
258-2775 Frame & Mtg Gp-Machine
| 25***75 | Frame & Mtg Group-Machine | 1 |
| 31***41 | Counterweight | 4 |
| 7X***49 | Bolt (M12x1.75x100mm); (M12x1.75x100-mm) | 4 |
258-2774 Frame Gp-Machine
| 14***32 | Pin As | 1 |
| 15***05 | Bolt-Shoulder | 2 |
| 22***40 | Latch As | 1 |
150-8621 Guide Gp-Lines
| 15***21 | Guide Group-Lines | 1 |
| 25***74 | Frame Group-Machine | 1 |
| 25***78 | Plate As | 1 |
287-4161 Kit-Counterweight
| 22***15 | Plate As | 1 |
| 24***77 | Bolt; (M8x1.25x12-mm) | 1 |
| 28***61 | Kit-Counterweight | 1 |
287-4160 Kit-Counterweight
| 25***73 | Frame As | 1 |
| 25***94 | Link As | 1 |
| 28***60 | Injector Fuel Supply Tube, Kit-Counterweight | 1 |
312-1024 Kit-Engine Enclosure -Vented
| 31***24 | Kit-Engine Enclosure; -Vented | 1 |
| 31***41 | Counterweight | 2 |
| 7X***49 | Bolt (M12x1.75x100mm); (M12x1.75x100-mm) | 4 |
342-2684 Kit-Machine Enclosure Seal -Debris Barrier
| 28***67 | Film-Instruction; (Service Chart, Read Omm)(Service Chart) | 1 |
| 28***68 | Film-Instruction; (Service Chart, Read Omm)(Service Chart) | 1 |
| 28***69 | Film-Instruction; (Service Chart, Read Omm)(Service Chart) | 1 |
311-8705 Kit-Machine Enclosure Seal -Debris Barrier
| 25***92 | Plate | 8 |
| 31***05 | Kit-Machine Enclosure Seal; -Debris Barrier | 1 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 4 |
333-7435 Kit-Roading Conversion -Italy
| 17***91 | Nut-Spring | 4 |
| 17***16 | Chock | 1 |
| 17***47 | Pin | 1 |
333-7436 Kit-Roading Conversion -Front
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
258-3884 Kit-Roading Conversion -Lights, Mirrors
| 12***18 | Seal; (1000-cm) | 0 |
| 17***79 | Insulation | 1 |
| 25***84 | Kit-Roading Conversion; -Lights, Mirrors | 1 |
315-7816 Kit-Roading Conversion -Italy
| 17***91 | Nut-Spring | 4 |
| 17***16 | Chock | 1 |
| 25***33 | Film-Notice; (Steering) | 1 |
315-7815 Kit-Roading Conversion -Germany
| 08***48 | Lamp; (12-Volt, 5-Watt) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
333-7434 Kit-Roading Conversion -Germany
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
258-4410 Lifting Gp-Machine -Kit, Four Point
| 15***80 | Washer-Hard; (22x38x6-mm Thk) | 8 |
| 25***89 | Mount | 4 |
| 25***92 | Bracket As-Lift | 1 |
258-4390 Lifting Gp-Machine -Kit, Single Point
| 15***80 | Washer-Hard; (22x38x6-mm Thk) | 8 |
| 25***90 | Lifting Group-Machine; -Kit, Single Point | 1 |
| 25***91 | Plate-Lift | 4 |
258-4385 Lifting Gp-Machine -Four Point
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
258-2794 Link As
| 15***80 | Washer-Hard; (22x38x6-mm Thk) | 8 |
| 25***94 | Link As | 1 |
| 25***89 | Mount | 4 |
258-3872 Mirror & Mtg Gp-Rear View -With Roading Light Mount
| 25***72 | Mirror & Mtg Group-Rear View; -With Roading Light Mount | 1 |
| 4K***09 | Bearing-Sleeve | 4 |
258-3848 Mounting Gp-Registration -Italian
| 13***66 | Mirror Group-Rear View | 2 |
| 14***71 | Clamp; (Top)(Top) | 1 |
| 14***72 | Clamp; (Bottom)(Bottom) | 1 |
307-6237 Mounting Gp-Roading Lights -Kit, Germany, Italy
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
280-8330 Suppression Gp-Sound -Engine
| 17***79 | Insulation | 1 |
| 26***78 | Insulation | 1 |
| 26***79 | Insulation | 1 |
294-4560 Suppression Gp-Sound -Machine
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 1 |
| 24***59 | Cover-Insulation | 1 |
| 24***60 | Cover-Insulation | 1 |
258-3496 Suppression Gp-Sound -Machine
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
| 17***20 | Strap-Dual Clamp | 5 |
Fuel System
295-7465 Control Gp-Governor
| 19***76 | Washer-Hard; (8.8x20x8-mm Thk) | 3 |
| 23***21 | Nut; (M10x1.25-Thd) | 1 |
| 25***19 | Muffler As | 1 |
295-7463 Control Gp-Governor
| 09***49 | Bolt; (M8x1.25x40-mm) | 11 |
| 23***05 | Manifold-Inlet | 1 |
| 23***06 | Gasket; (Inlet Manifold) | 1 |
280-6340 Control Gp-Governor
| 09***49 | Bolt; (M8x1.25x40-mm) | 12 |
| 23***05 | Manifold-Inlet | 1 |
| 23***06 | Gasket; (Inlet Manifold) | 1 |
335-5751 Lines Gp-Fuel
| 09***00 | Washer; (1.5mm Thk) | 3 |
| 19***06 | Gasket | 4 |
| 23***18 | Gasket | 1 |
295-7029 Lines Gp-Fuel
| 19***76 | Washer-Hard; (8.8x20x8-mm Thk) | 3 |
| 23***21 | Nut; (M10x1.25-Thd) | 1 |
| 27***50 | Muffler As | 1 |
235-5901 Lines Gp-Fuel Injection
| 09***00 | Washer; (1.5mm Thk) | 3 |
| 19***06 | Gasket | 4 |
| 23***18 | Gasket | 1 |
314-9909 Lines Gp-Fuel Injection
| 13***87 | Clip | 1 |
| 19***36 | Insert-Threaded; (M6x1-Thd) | 3 |
| 23***96 | Screw-Flat Head; (M6x1x35-mm) | 4 |
258-2444 Lines Gp-Fuel Prm & Filter
| 13***87 | Clip | 1 |
| 19***36 | Insert-Threaded; (M6x1-Thd) | 3 |
| 23***96 | Screw-Flat Head; (M6x1x35-mm) | 4 |
314-9911 Pump Gp-Fuel Injection
| 09***35 | Cap | 1 |
| 11***63 | Support | 4 |
| 11***64 | Hose | 4 |
335-5752 Pump Gp-Fuel Injection
| 09***35 | Cap | 1 |
| 09***90 | Shim (1.800mm Thick) | 0 |
| 09***94 | Shim (0.700mm Thick) | 0 |
235-5902 Pump Gp-Fuel Injection
| 06***80 | Fitting | 1 |
| 19***72 | Clip | 1 |
| 1P***78 | Clamp; (Hose) | 8 |
258-3442 Pump Gp-Fuel Prm & Prim Filter -Water Separator
| 09***35 | Cap | 1 |
| 11***63 | Support | 4 |
| 11***64 | Hose | 4 |
258-2439 Tank & Mtg Gp-Fuel
| 09***35 | Cap | 1 |
| 11***63 | Support | 4 |
| 11***64 | Hose | 4 |
258-2440 Tank Gp-Fuel
| 06***80 | Fitting | 1 |
| 19***72 | Clip | 1 |
| 1P***78 | Clamp; (Hose) | 8 |
Hydraulic System
227-8807 Accumulator Gp-Hydraulic -Uncharged
| 22***07 | Accumulator Group-Hydraulic; -Uncharged | 1 |
149-0686 Accumulator Gp-Hydraulic -Charged
| 14***86 | Accumulator Group-Hydraulic; -Charged | 1 |
| 17***79 | Insulation | 2 |
| 29***55 | Insulation | 1 |
307-6504 Accumulator Gp-Ride Control -Charged
| 30***04 | Accumulator Group-Ride Control; -Charged | 1 |
307-6505 Accumulator Gp-Ride Control -Uncharged
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
| 22***32 | Cap; (Gas Valve) | 1 |
| 22***52 | Valve-Gas; (Brake Accumulator) | 1 |
231-5274 Cylinder & Mtg Gp-Angle Blade
| 06***43 | Ring-Snap | 1 |
| 21***55 | Pin As | 1 |
| 21***43 | Bushing | 1 |
230-5406 Cylinder & Mtg Gp-Angle Blade
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
| 22***32 | Cap; (Gas Valve) | 1 |
| 22***52 | Valve-Gas; (Brake Accumulator) | 1 |
293-6264 Cylinder Gp-Bucket
| 16***13 | Kit-Seal | 1 |
| 29***64 | Cylinder Group-Bucket | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
154-5018 Cylinder Gp-Bucket
| 15***18 | Cylinder Group-Bucket | 1 |
| 23***66 | Pin As | 6 |
| 23***99 | Spacer; (25.4x28.4x13-mm Thk) | 12 |
278-1975 Cylinder Gp-Grapple -Industrial
| 25***97 | Bearing-Sleeve | 1 |
| 27***75 | Cylinder Group-Grapple; -Industrial | 1 |
| 28***91 | Kit-Seal | 1 |
164-9295 Cylinder Gp-Grapple
| 16***95 | Cylinder Group-Grapple | 1 |
| 26***41 | Kit-Seal | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
255-0943 Cylinder Gp-Grapple
| 17***85 | Kit-Seal | 1 |
| 25***43 | Cylinder Group-Grapple | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
278-1969 Cylinder Gp-Hydraulic
| 02***87 | Fitting-Grease; (Universal Joint) | 2 |
| 26***40 | Kit-Seal; (Swing Cylinder) | 1 |
| 27***69 | Cylinder Group-Hydraulic | 1 |
192-2640 Cylinder Gp-Hydraulic -Coupler
| 19***40 | Cylinder Group-Hydraulic; -Coupler | 1 |
| 25***97 | Bearing-Sleeve | 1 |
| 25***42 | Bearing-Sleeve | 1 |
274-9931 Cylinder Gp-Hydraulic -Angle Blade
| 02***87 | Fitting-Grease; (Universal Joint) | 2 |
| 26***40 | Kit-Seal; (Swing Cylinder) | 1 |
| 27***31 | Cylinder Group-Hydraulic; -Angle Blade | 1 |
225-9521 Cylinder Gp-Hydraulic -Angle Blade
| 22***21 | Cylinder Group-Hydraulic; -Angle Blade | 1 |
274-9930 Cylinder Gp-Hydraulic -Angle Blade
| 17***58 | Kit-Seal | 1 |
| 21***55 | Rod End As | 1 |
| 27***30 | Cylinder Group-Hydraulic; -Angle Blade | 1 |
258-2516 Cylinder Gp-Lift
| 25***97 | Bearing-Sleeve | 1 |
| 25***16 | Cylinder Group-Lift | 1 |
| 27***70 | Kit-Seal; (Hydraulic Cylinder) | 1 |
293-5713 Cylinder Gp-Lift
| 21***24 | Kit-Seal; (Lift) | 2 |
| 25***14 | Cylinder Group-Tilt; -Rh | 1 |
| 25***15 | Cylinder Group-Tilt; -Lh | 1 |
258-2559 Cylinder Gp-Lift Arm -Vertical Lift
| 25***59 | Cylinder Group-Lift Arm; -Vertical Lift | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
| 30***52 | Tee | 1 |
258-2515 Cylinder Gp-Tilt -Lh
| 25***04 | Valve Group-Control | 1 |
| 25***15 | Cylinder Group-Tilt; -Lh | 1 |
| 25***56 | Pump & Mtg Group-Work Tool | 1 |
258-2514 Cylinder Gp-Tilt -Rh
| 25***34 | Tank & Mtg Group-Hydraulic | 1 |
| 25***14 | Cylinder Group-Tilt; -Rh | 1 |
| 25***81 | Filter & Lines Group-Hydraulic | 1 |
293-5711 Cylinder Gp-Tilt -Rh
| 25***05 | Valve & Mtg Group-Control | 1 |
| 25***57 | Pump & Mtg Group-Work Tool; -High Flow | 1 |
| 25***86 | Lines Group-Hydraulic Fan | 1 |
293-5712 Cylinder Gp-Tilt -Lh
| 25***78 | Lines Group-Hydraulic; -Work Tool Positioner | 1 |
| 25***69 | Manifold & Mtg Group-Control; -Work Tool Positioner | 1 |
| 29***12 | Cylinder Group-Tilt; -Lh | 1 |
292-2439 Fitting Gp-Hydraulic -1-Speed
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***13 | Coupling-Permanent | 1 |
218-5841 Fitting Gp-Hydraulic -Quick Disconnect, Female, High Flow
| 21***41 | Fitting Group-Hydraulic; -Quick Disconnect, Female, High Flow | 1 |
| 25***05 | Valve & Mtg Group-Control | 1 |
| 25***86 | Lines Group-Hydraulic Fan | 1 |
218-5840 Fitting Gp-Hydraulic -Quick Disconnect, Male, High Flow
| 21***40 | Fitting Group-Hydraulic; -Quick Disconnect, Male, High Flow | 1 |
| 25***04 | Valve Group-Control | 1 |
| 25***82 | Lines Group-Hydraulic Fan; -Radiator | 1 |
285-2190 Fitting Gp-Hydraulic -Manual
| 25***69 | Manifold & Mtg Group-Control; -Work Tool Positioner | 1 |
| 28***90 | Fitting Group-Hydraulic; -Manual | 1 |
| 30***45 | Lines Group-Hydraulic; -Ride Control, Work Tool Positioner | 1 |
304-6744 Hydraulic Ar
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
258-3358 Hydraulic Ar -Work Tool Positioner
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***95 | Fitting As; (Quick Disconnect, Male) | 1 |
258-3731 Hydraulic Ar -Standard Flow
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
258-2601 Hydraulic Ar
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***39 | Relay As | 1 |
| 14***15 | Connector As | 1 |
258-3181 Hydraulic Ar -Standard Flow
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
258-2426 Hydraulic Ar
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***73 | Clip | 2 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
258-3734 Hydraulic Ar -High Flow
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
258-3183 Hydraulic Ar -High Flow
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
258-3911 Kit-Quick Coupler Conversion -Hydraulic
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
304-6750 Kit-Ride Control
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***95 | Fitting As; (Quick Disconnect, Male) | 1 |
294-5580 Kit-Work Tool Positioner -Self-Leveling Hydraulics
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***95 | Fitting As; (Quick Disconnect, Male) | 1 |
279-5415 Lines Gp-Bucket -Multipurpose
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***95 | Fitting As; (Quick Disconnect, Male) | 1 |
279-5412 Lines Gp-Bucket -Industrial
| 14***15 | Connector As | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 6 |
| 14***42 | Connector Group | 2 |
279-5414 Lines Gp-Bucket -Multipurpose
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 13***51 | Spacer; (11x19x6-mm Thk) | 1 |
| 14***25 | Connector As. | 4 |
293-0140 Lines Gp-Bucket -Multipurpose
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***39 | Relay As | 1 |
| 14***15 | Connector As | 1 |
285-6113 Lines Gp-Bucket -Utility
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 16***89 | Hose As | 2 |
279-5413 Lines Gp-Bucket -Multipurpose
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 13***51 | Spacer; (11x19x6-mm Thk) | 1 |
| 14***25 | Connector As. | 4 |
279-5416 Lines Gp-Bucket -Multipurpose
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 16***89 | Hose As | 2 |
154-5019 Lines Gp-Bucket
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
154-5052 Lines Gp-Bucket
| 14***19 | Connector As | 2 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
231-5273 Lines Gp-Connecting
| 11***61 | Hose As | 1 |
| 14***15 | Connector As | 2 |
| 14***16 | Connector Group | 2 |
177-1986 Lines Gp-Connecting
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
258-2425 Lines Gp-Coupler
| 11***61 | Hose As | 1 |
| 14***15 | Connector As | 2 |
| 14***16 | Connector Group | 2 |
286-9250 Lines Gp-Grapple
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 14***11 | Plug Group | 1 |
| 17***25 | Elbow As | 1 |
286-9279 Lines Gp-Grapple
| 14***97 | Block | 2 |
| 25***39 | Hose As | 4 |
| 25***64 | Tube As | 1 |
161-0187 Lines Gp-Grapple
| 11***61 | Hose As | 1 |
| 14***15 | Connector As | 2 |
| 14***16 | Connector Group | 2 |
258-2878 Lines Gp-Hydraulic -Work Tool Positioner
| 11***49 | Fitting As; (Quick Disconnect) | 1 |
| 14***62 | Elbow Group | 1 |
| 15***49 | Elbow As | 1 |
258-2876 Lines Gp-Hydraulic
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
| 15***43 | Connector As. | 1 |
304-6745 Lines Gp-Hydraulic -Ride Control, Work Tool Positioner
| 15***49 | Elbow As | 1 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 2 |
| 19***08 | Adapter | 1 |
258-2582 Lines Gp-Hydraulic Fan -Radiator
| 11***49 | Fitting As; (Quick Disconnect) | 2 |
| 14***61 | Elbow Group | 1 |
| 14***62 | Elbow Group | 1 |
258-2786 Lines Gp-Hydraulic Fan
| 11***49 | Fitting As; (Quick Disconnect) | 2 |
| 14***52 | Elbow As. | 1 |
| 14***61 | Elbow Group | 1 |
258-2780 Lines Gp-Hydraulic Oil Cooler
| 11***49 | Fitting As; (Quick Disconnect) | 1 |
| 14***52 | Elbow As. | 1 |
| 14***61 | Elbow Group | 1 |
258-3595 Lines Gp-Lift Cylinder
| 06***58 | Clamp | 2 |
| 10***03 | Plate-Cover | 3 |
| 14***93 | Elbow Group | 2 |
258-3393 Lines Gp-Lowering Control -Manual
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 5 |
258-3238 Lines Gp-Pump -High Flow
| 10***73 | Clip | 2 |
| 25***90 | Bracket As | 1 |
| 25***38 | Lines Group-Pump; -High Flow | 1 |
258-3237 Lines Gp-Pump
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 13***51 | Spacer; (11x19x6-mm Thk) | 1 |
258-3593 Lines Gp-Tilt Cylinder
| 25***02 | Manifold & Solenoid Group-Control; -Work Tool Positioner | 1 |
| 25***93 | Lines Group-Tilt Cylinder | 1 |
| 4P***34 | Clip-Ladder; (00800 mm ) | 1 |
258-3594 Lines Gp-Work Tool
| 24***81 | Flange | 2 |
| 24***12 | Kit-Seal; (Solenoid Valve) | 1 |
| 25***34 | Valve Group-Solenoid; (Hydraulic Backup Engaged Gear) | 1 |
258-3350 Lines Gp-Work Tool -High Flow Xps
| 18***51 | Washer-Hard; (5.3x8.8x2-mm Thk) | 8 |
| 19***08 | Seal-O-Ring | 1 |
| 21***14 | Seal-O-Ring | 1 |
258-3462 Manf & Solenoid Mtg Gp-Accum -Pilot Shutoff
| 24***81 | Flange | 2 |
| 24***12 | Kit-Seal; (Solenoid Valve) | 1 |
| 25***34 | Valve Group-Solenoid; (Hydraulic Backup Engaged Gear) | 1 |
304-6747 Manf & Solenoid Mtg Gp-Accum -Ride Control
| 10***08 | Kit-Seal; (Solenoid Valve, Quick Steer) | 1 |
| 27***34 | Coil As; (12-Volt) | 2 |
| 27***44 | Valve Group-Solenoid; (Quick Coupler) | 1 |
258-3394 Manifold & Lines Gp-Accum
| 14***88 | Kit-Seal; (Ride Control, Switch) | 2 |
| 25***94 | Manifold & Lines Group-Accum | 1 |
| 27***35 | Coil As | 2 |
258-3463 Manifold & Mtg Gp-Control -Motor, 2-Speed
| 23***28 | Coil As | 1 |
| 25***77 | Motor Group-Gear; (Fan, Demand) | 1 |
| 25***63 | Manifold & Mtg Group-Control; -Motor, 2-Speed | 1 |
258-3469 Manifold & Mtg Gp-Control -Work Tool Positioner
| 15***12 | Pin | 2 |
| 15***13 | Pin | 2 |
| 25***69 | Manifold & Mtg Group-Control; -Work Tool Positioner | 1 |
231-5278 Manifold & Mtg Gp-Control -Angling Blade
| 14***88 | Kit-Seal; (Ride Control, Switch) | 1 |
| 23***78 | Manifold & Mtg Group-Control; -Angling Blade | 1 |
| 27***35 | Coil As | 1 |
258-2802 Manifold & Solenoid Gp-Control -Work Tool Positioner
| 15***13 | Plate | 1 |
| 15***41 | Pin | 2 |
| 15***42 | Pin | 2 |
291-0010 Manifold Gp-Control -Quick Coupler
| 25***53 | Pump Group-Gear | 1 |
| 27***60 | Washer-Hard; (15x22x2.5-mm Thk) | 4 |
| 27***14 | Kit-Seal; (Gear Pump) | 1 |
274-8563 Manifold Gp-Control -Pilot Shutoff
| 15***41 | Pin | 2 |
| 15***42 | Pin | 2 |
| 27***63 | Manifold Group-Control; -Pilot Shutoff | 1 |
274-8564 Manifold Gp-Control -Motor, 2-Speed
| 25***60 | Pump Group-Gear | 1 |
| 27***60 | Washer-Hard; (15x22x2.5-mm Thk) | 4 |
| 27***64 | Manifold Group-Control; -Motor, 2-Speed | 1 |
258-9011 Manifold Gp-Control -Angling Blade
| 15***13 | Pin | 2 |
| 25***11 | Manifold Group-Control; -Angling Blade | 1 |
| 6V***89 | Locknut; (M8x1.25-Thd) | 2 |
307-2276 Manifold Gp-Ride Control -Accumulator
| 11***04 | Bolt-Socket Head; (M12x1.75x45-mm) | 4 |
| 23***86 | Kit-Bearing; (Generator Pump) | 1 |
| 23***87 | Kit-Bearing; (Generator Pump) | 1 |
307-2275 Manifold Gp-Ride Control
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 2 |
| 25***54 | Pump Group-Piston; -High Flow | 1 |
| 25***55 | Pump Group-Gear; (Work Tool Hydraulic) | 1 |
258-2579 Motor & Mtg Gp-Hydraulic Fan
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 2 |
| 25***54 | Pump Group-Piston; -High Flow | 1 |
| 25***79 | Motor & Mtg Group-Hydraulic Fan | 1 |
154-5011 Mounting Gp-Cylinder
| 15***11 | Mounting Group-Cylinder | 1 |
| 25***35 | Tank Group-Hydraulic | 1 |
| 25***47 | Bracket | 1 |
156-0891 Mounting Gp-Cylinder -Industrial
| 13***45 | Pad; (Connector) | 1 |
| 14***37 | Cap As-Filler; (Hydraulic Tank) | 1 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
165-8731 Mounting Gp-Cylinder -Utility
| 16***31 | Mounting Group-Cylinder; -Utility | 1 |
| 25***04 | Strainer As; (Hydraulic Tank) | 1 |
| 26***90 | Gauge Group-Sight; (Hydraulic Tank) | 1 |
286-9248 Mounting Gp-Cylinder -Grapple Bucket
| 11***52 | Spacer; (13x25x22.14-mm Thk) | 2 |
| 23***25 | Stud; (M10x1.5-Thd) | 1 |
| 25***09 | Valve Group-Control | 1 |
258-3402 Pump & Mtg Gp-Gear
| 11***52 | Spacer; (13x25x22.14-mm Thk) | 2 |
| 23***25 | Stud; (M10x1.5-Thd) | 1 |
| 25***69 | Bracket As | 1 |
258-2557 Pump & Mtg Gp-Work Tool -High Flow
| 11***52 | Spacer; (13x25x22.14-mm Thk) | 2 |
| 23***25 | Stud; (M10x1.5-Thd) | 1 |
| 25***08 | Valve Group-Control | 1 |
258-2556 Pump & Mtg Gp-Work Tool
| 25***56 | Pump & Mtg Group-Work Tool | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 6V***97 | Seal (Later Machines And Field Installed) | 1 |
258-2554 Pump Gp-Piston -High Flow
| 11***52 | Spacer; (13x25x22.14-mm Thk) | 2 |
| 23***25 | Stud; (M10x1.5-Thd) | 1 |
| 25***54 | Pump Group-Piston; -High Flow | 1 |
258-3401 Pump Gp-Piston & Gear
| 00***82 | Spring | 3 |
| 12***16 | Bolt-Shoulder | 1 |
| 14***31 | Valve-Check | 3 |
258-2434 Tank & Mtg Gp-Hydraulic
| 18***54 | Valve Group-Solenoid; -Auxiliary | 6 |
| 19***00 | Valve Group-Solenoid; -12-Volt-Work Tool | 2 |
| 20***71 | Cap | 1 |
258-2806 Tank Gp-Hydraulic
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 12 |
| 18***71 | Plug-Hex Socket | 9 |
| 19***00 | Valve Group-Solenoid; -12-Volt-Work Tool | 2 |
258-2435 Tank Gp-Hydraulic
| 00***82 | Spring | 3 |
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 12 |
| 12***16 | Bolt-Shoulder | 1 |
258-2505 Valve & Mtg Gp-Control
| 11***61 | Seal Kit; (Includes Seals, Thrust Ring, Stem And Connectors) | 1 |
| 20***71 | Valve Group-Manual; (Coupler Pin, Lift Arm Lwr Cont) | 1 |
| 20***73 | Valve Group-Manual; (Coupler Pin, Lift Arm Lwr Cont) | 1 |
6e-4701 Valve Gp-Check -Pilot Oil
| 12***98 | Seat | 1 |
| 12***99 | Seat | 1 |
| 13***49 | Connector | 1 |
258-2509 Valve Gp-Control
| 11***37 | Washer; (46x70x1-mm Thk)(1mm`Thk) | 12 |
| 14***91 | Pin As | 2 |
| 14***94 | Pin | 1 |
258-2504 Valve Gp-Control
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
| 21***73 | Nut; (1/2-28-Thd) | 1 |
| 22***29 | Coil As-Solenoid; (12-Volt)(Modulating Valve) | 1 |
258-2508 Valve Gp-Control
| 25***57 | Bearing-Sleeve | 4 |
| 25***08 | Valve Group-Control | 1 |
| 6K***48 | Bearing-Sleeve | 4 |
336-1325 Valve Gp-Control
| 13***86 | Edge Group-Cutting | 1 |
| 17***81 | Blade Group-Angling | 1 |
| 17***83 | Spring Group-Blade | 1 |
336-1324 Valve Gp-Control -Lift Arm
| 15***62 | Film-Information; (Tie-Down Location) | 2 |
| 18***33 | Step Group-Material Handling Arm | 1 |
| 21***50 | Arm As | 1 |
112-1817 Valve Gp-Manual -Lowering Control
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 14***41 | Edge Group-Cutting | 1 |
| 17***82 | Blade Group-Angling | 1 |
295-1799 Valve Gp-Relief -Main
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
211-3014 Valve Gp-Shuttle -High Flow
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
185-4254 Valve Gp-Solenoid
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 16***68 | Film-Warning; (No Clearance, Stay Back) | 2 |
195-9700 Valve Gp-Solenoid -12-Volt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 16***68 | Film-Warning; (No Clearance, Stay Back) | 2 |
Implements
287-4298 Arm As-Lift
| 22***21 | Trunnion As | 1 |
| 22***79 | Plate As | 1 |
| 22***28 | Plate As | 1 |
258-2799 Pin & Link Gp-Lift Arm -With Support
| 22***21 | Trunnion As | 1 |
| 22***79 | Plate As | 1 |
| 22***28 | Plate As | 1 |
Lubrication System
287-6016 Breather Gp
| 23***07 | Pulley | 1 |
| 28***16 | Breather Group | 1 |
| 8T***42 | Bolt; (M8x1.25x14-mm) | 4 |
314-9901 Filter Gp-Engine Oil
| 09***05 | Cap | 1 |
| 19***24 | Ring-Snap | 2 |
| 22***45 | Rocker As | 8 |
235-5897 Filter Gp-Engine Oil
| 23***97 | Filter Group-Engine Oil | 1 |
| 35***69 | V-Belt; (Water Pump) | 1 |
287-5377 Lines Gp-Engine Oil
| 11***68 | Clip | 2 |
| 15***28 | Clamp | 1 |
| 19***22 | Bolt As; (M8x1.25x22-mm) | 2 |
235-5895 Pump Gp-Engine Oil
| 15***28 | Clamp | 2 |
| 23***37 | Clip-Hose | 1 |
| 23***38 | Clip | 3 |
287-5665 Valve Gp-Engine Oil Relief
| 09***37 | Seal-O-Ring | 1 |
| 09***71 | Seal-O-Ring (Id=94.40mm) | 1 |
| 1R***34 | Filter-Engine Oil | 1 |
Machine Arrangement
295-7292 Chassis Ar
| 15***21 | Guide Group-Lines | 1 |
| 25***39 | Tank & Mtg Group-Fuel | 1 |
| 25***59 | Cylinder Group-Lift Arm; -Vertical Lift | 1 |
258-2510 Chassis Ar
| 15***21 | Guide Group-Lines | 1 |
| 25***39 | Tank & Mtg Group-Fuel | 1 |
| 25***44 | Lines Group-Fuel Prm & Filter | 1 |
258-3262 Common Ar
| 25***45 | Installation Ar-Engine | 1 |
| 25***10 | Chassis Ar | 1 |
| 25***01 | Hydraulic Ar | 1 |
295-7262 Common Ar
| 25***01 | Hydraulic Ar | 1 |
| 25***92 | Film Group; -262c | 1 |
| 25***00 | Cab Ar-Enclosed Rops | 1 |
342-5010 Control Ar-Machine -Aux Proportional Flow
| 25***03 | Control Group-Electrohydraulic; -Lh | 1 |
| 25***06 | Control Group-Electrohydraulic; -Rh | 1 |
| 34***10 | Control Ar-Machine; -Auxiliary Proportional Flow | 1 |
342-5009 Control Ar-Machine -On, Off Auxiliary Control
| 25***03 | Control Group-Electrohydraulic; -Lh | 1 |
| 25***05 | Control Group-Electrohydraulic; -Rh | 1 |
| 34***09 | Control Ar-Machine; -On, Off Auxiliary Control | 1 |
342-5011 Control Ar-Machine -Aux Proportional Flow
| 25***04 | Control Group-Electrohydraulic; -Lh, High Flow | 1 |
| 25***06 | Control Group-Electrohydraulic; -Rh | 1 |
| 25***25 | Wiring Group-Work Tool | 1 |
258-3803 Conversion Ar-Machine -Outside Nacd
| 25***79 | Motor & Mtg Group-Hydraulic Fan | 1 |
| 25***96 | Suppression Group-Sound; -Machine | 1 |
| 25***03 | Conversion Ar-Machine; -Outside Nacd | 1 |
315-6354 Conversion Ar-Machine
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 25***79 | Motor & Mtg Group-Hydraulic Fan | 1 |
300-7629 Machine Ar-Special -Extreme Service Power Train
| 25***26 | Hydraulic Ar | 1 |
| 25***09 | Cover Group-Instrument Panel | 1 |
| 30***29 | Machine Ar-Special; -Extreme Service Power Train | 1 |
258-3751 Machine Ar-Special
| 25***06 | Pump & Mtg Group-Hydrostatic | 1 |
| 25***00 | Power Train Ar | 1 |
| 25***58 | Hydraulic Ar; -Work Tool Positioner | 1 |
304-6741 Machine Ar-Special
| 25***06 | Pump & Mtg Group-Hydrostatic | 1 |
| 25***00 | Power Train Ar; -2-Speed | 1 |
| 25***63 | Panel Group-Instrument; -Rh | 1 |
258-3683 Machine Ar-Special -Work Tool Positioner, 2-Speed
| 25***06 | Pump & Mtg Group-Hydrostatic | 1 |
| 25***58 | Hydraulic Ar; -Work Tool Positioner | 1 |
| 25***00 | Power Train Ar; -2-Speed | 1 |
258-3754 Machine Ar-Special -Ride Control, Work Tool Positioner, 2-Speed
| 25***06 | Pump & Mtg Group-Hydrostatic | 1 |
| 25***58 | Hydraulic Ar; -Work Tool Positioner | 1 |
| 25***00 | Power Train Ar; -2-Speed | 1 |
258-3748 Machine Ar-Special
| 25***06 | Pump & Mtg Group-Hydrostatic | 1 |
| 25***26 | Hydraulic Ar | 1 |
| 25***00 | Power Train Ar | 1 |
300-7635 Machine Ar-Special -Extreme Service Power Train
| 25***58 | Hydraulic Ar; -Work Tool Positioner | 1 |
| 25***63 | Panel Group-Instrument; -Rh | 1 |
| 30***35 | Plug, Expansion, Plug-Expansion, Expansion Plug; Valve Insert Material: Pl33, Expansion Plug; 1 Inch, Expansion Plug, Machine Ar-Special; -Extreme Service Power Train, Plug, Expansion Plug; Use Bearing, Main | 1 |
Operator Station
258-4229 Accessory Gp-Cab
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
| 25***29 | Accessory Group-Cab | 1 |
176-3900 Accumulator Gp-Refrigerant -Uncharged
| 17***00 | Accumulator Group-Refrigerant; -With Desiccant | 1 |
| 25***66 | Installation Group-Radio | 1 |
| 25***90 | Window Group-Cab; -Side | 1 |
186-6190 Accumulator Gp-Refrigerant -Charged
| 18***90 | Accumulator Group-Refrigerant; -With Desiccant | 1 |
| 25***66 | Installation Group-Radio | 1 |
| 25***90 | Window Group-Cab; -Side | 1 |
258-4261 Air Conditioner & Mounting Gp
| 25***10 | Window Group-Cab | 1 |
| 25***20 | Liner Group-Cab | 1 |
| 25***00 | Wiring Group-Cab | 1 |
258-4260 Air Conditioner Ar
| 25***60 | Air Conditioner Ar | 1 |
| 8T***42 | Rod End-Yoke | 1 |
| 8T***44 | Pin As-Spring | 1 |
258-4290 Air Conditioner Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***93 | Lockwasher | 1 |
| 22***96 | Seal-O-Ring | 2 |
258-4311 Armrest & Mounting Gp
| 11***15 | Relay As; (12-Volt)(Junction Box) | 1 |
| 25***84 | Bracket As; (Upper Lh) | 1 |
| 25***11 | Armrest & Mounting Group | 1 |
269-0258 Base As-Joystick -Lh
| 10***33 | Kit; (Receptacle) (Includes Receptacle As) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***16 | Terminal | 1 |
269-0257 Base As-Joystick -Rh
| 26***29 | Shroud As | 1 |
| 26***57 | Base As-Joystick; -Rh | 1 |
| 28***41 | Coil As | 1 |
258-3680 Cab Ar-Enclosed Rops
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 2 |
| 10***33 | Kit; (Receptacle) (Includes Receptacle As) | 1 |
| 10***95 | Terminal-Blade; (14-Ga To 18-Ga) | 2 |
258-4000 Cab Ar-Enclosed Rops
| 25***00 | Cab Ar-Enclosed Rops | 1 |
| 26***66 | Control Group-Joystick; -Lh | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
258-3742 Cab Ar-Enclosed Rops
| 25***42 | Cab Ar-Enclosed Rops | 1 |
| 25***71 | Switch As; (Temperature Control) | 1 |
| 25***72 | Switch As; (Blower Fan Speed) | 1 |
298-7198 Cable Gp-Control -Manual Lowering
| 26***64 | Control Group-Joystick; -Rh | 1 |
| 29***98 | Cable Group-Control; -Manual Lowering | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
276-0074 Cable Gp-Control
| 26***65 | Control Group-Joystick; -Lh, High Flow | 1 |
| 27***74 | Cable Group-Control | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
258-2468 Compressor & Mtg Gp-Refrig
| 25***68 | Compressor & Mtg Group-Refrig | 1 |
| 26***62 | Control Group-Joystick; -Rh | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
258-4280 Condenser & Mtg Gp-Refrigerant
| 25***80 | Condenser & Mtg Group-Refrigerant | 1 |
| 26***63 | Control Group-Joystick; -Rh, High Flow | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
266-2425 Condenser & Mtg Gp-Refrigerant
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 9 |
| 26***25 | Condenser & Mtg Group-Refrigerant | 1 |
266-2430 Control & Wiring Gp-Air & Temp
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 2 |
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
258-4299 Control Gp-Air & Temperature
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
258-3404 Control Gp-Electrohydraulic -Lh, High Flow
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
258-3405 Control Gp-Electrohydraulic -Rh
| 25***05 | Control Group-Electrohydraulic; -Rh | 1 |
| 25***27 | Screw-Truss Head; (No 12x17.46-mm) | 2 |
| 25***28 | Plate | 1 |
258-3406 Control Gp-Electrohydraulic -Rh
| 13***39 | Nut; (U-Type Retainer) | 10 |
| 21***06 | Screw-Truss Head; (M6x1x16-mm) | 10 |
| 25***06 | Control Group-Electrohydraulic; -Rh | 1 |
258-3403 Control Gp-Electrohydraulic -Lh
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
| 21***89 | Screw; (M4x25-mm) | 3 |
| 25***37 | Boot | 1 |
258-3407 Control Gp-Electrohydraulic -Rh, High Flow
| 10***56 | Plug; (Switch) | 6 |
| 25***07 | Control Group-Electrohydraulic; -Rh, High Flow | 1 |
| 25***33 | Cover; (Cluster) | 1 |
272-1790 Control Gp-Handle -Lh
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 2 |
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
269-0264 Control Gp-Joystick -Rh
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
269-0262 Control Gp-Joystick -Rh
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 2 |
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
269-0266 Control Gp-Joystick -Lh
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
269-0263 Control Gp-Joystick -Rh, High Flow
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 2 |
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
269-0265 Control Gp-Joystick -Lh, High Flow
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
258-4245 Cover Gp-Cab
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
258-4314 Cover Gp-Console -Rh, Lh
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
258-4009 Cover Gp-Instrument Panel
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
258-4070 Door & Mtg Gp-Cab -With Cab Tilt Gas Spring
| 14***71 | Louver As | 6 |
| 16***55 | Bolt; (M6x1x35-mm) | 2 |
| 20***85 | Bolt; (M8x1.25x35-mm) | 1 |
258-4440 Door & Mtg Gp-Cab -With Cab Tilt Gas Spring
| 25***40 | Door & Mtg Group-Cab; -With Cab Tilt Gas Spring | 1 |
| 28***14 | Handle | 1 |
| 29***37 | Nut | 1 |
258-4080 Door & Mtg Gp-Cab -With Cab Tilt Gas Spring
| 15***80 | Washer-Hard; (22x38x6-mm Thk) | 8 |
| 25***80 | Door & Mtg Group-Cab; -With Cab Tilt Gas Spring | 1 |
| 25***89 | Mount | 4 |
258-4086 Door Gp-Cab -Glass
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***56 | Plug; (Switch) | 1 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
258-4442 Door Gp-Cab
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 16***72 | Speaker As-Radio | 2 |
| 17***37 | Connector; (Radio) | 1 |
258-4087 Door Gp-Cab -Polycarbonate
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
258-4252 Duct & Filter Gp-Cab Air
| 00***10 | Elbow | 1 |
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 2 |
| 10***74 | Seal-Connector | 2 |
258-4400 Guard Gp-Rops/Fops -Kit
| 12***70 | Screw-Machine; (M6x1x40-mm) | 3 |
| 17***91 | Nut-Spring | 3 |
| 25***79 | Knob As | 1 |
298-7197 Handle Gp
| 10***96 | Clip | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***11 | Support | 1 |
258-4251 Heater & Mtg Gp-Cab
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***15 | Connector | 1 |
258-4250 Heater Ar-Cab
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***15 | Connector | 1 |
258-4270 Heater Gp-Cab
| 00***10 | Elbow | 1 |
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 2 |
| 10***74 | Seal-Connector | 2 |
337-3991 Installation Gp-Radio -Kit
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 26***33 | Switch As-Rocker; (Control Pattern Change) | 1 |
| 28***81 | Spacer,10.4mm Id X 22mm Od X 35mm L; Spacing Bar, Spacer,10.4mm Id X 22mm Od X 35mm L, Film-Instruction; (Control Pattern, Rh) | 1 |
258-4066 Installation Gp-Radio
| 25***85 | Window Group-Cab; -Side, Lh | 1 |
| 25***86 | Window Group-Cab; -Side, Rh | 1 |
| 25***66 | Installation Group-Radio | 1 |
350-9038 Kit-Air Cond & Heater Instl
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 13***42 | Screw-Self-Tapping; (M5x2.3x18.8-mm) | 4 |
| 26***20 | Switch As-Rocker; (Creeper Control) | 1 |
350-9039 Kit-Air Cond & Heater Instl
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 13***42 | Screw-Self-Tapping; (M5x2.3x18.8-mm) | 4 |
| 26***20 | Switch As-Rocker; (Creeper Control) | 1 |
258-2474 Kit-Air Cond & Heater Instl
| 25***74 | Kit-Air Cond & Heater Instl | 1 |
| 28***81 | Spacer,10.4mm Id X 22mm Od X 35mm L; Spacing Bar, Spacer,10.4mm Id X 22mm Od X 35mm L, Film-Instruction; (Control Pattern, Rh) | 1 |
| 28***82 | Film-Instruction; (Control Pattern, Lh) | 1 |
305-8044 Kit-Air Conditioner Breather
| 12***78 | Locknut; (M6x1-Thd) | 1 |
| 25***46 | Lever Group-Governor | 1 |
| 25***47 | Cable As | 1 |
258-2475 Kit-Air Conditioner Instl -Conversion
| 12***78 | Locknut; (M6x1-Thd) | 1 |
| 25***75 | Kit-Air Conditioner Instl; -Conversion | 1 |
| 28***41 | Nut; (M10x1.5-mm Thd) | 1 |
258-4443 Kit-Cab Door & Mounting
| 11***27 | Screw-Machine; (M6x1x30-mm) | 2 |
| 13***27 | Seal; (69-cm) | 0 |
| 17***22 | Seal; (230-cm Each) | 0 |
280-6084 Kit-Cab Door & Mounting -Polycarbonate
| 25***27 | Screw-Truss Head; (No 12x17.46-mm) | 6 |
| 25***25 | Liner As | 1 |
| 25***26 | Cover As | 1 |
258-2473 Kit-Cab Door & Mounting -Glass
| 11***27 | Screw-Machine; (M6x1x30-mm) | 2 |
| 13***27 | Seal; (69-cm) | 0 |
| 17***22 | Seal; (230-cm Each) | 0 |
280-6077 Kit-Cab Heater & Mounting
| 10***96 | Clip | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***11 | Support | 1 |
258-2472 Kit-Cab Window -Side
| 00***10 | Elbow | 1 |
| 13***53 | Hose; (192.5cm) (X2) | 0 |
| 17***20 | Strap-Dual Clamp | 3 |
292-7927 Kit-Control Pattern Change -Dedicated
| 28***70 | Mirror As; (Rear View) | 1 |
| 29***27 | Kit-Control Pattern Change; -Dedicated | 1 |
| 3B***05 | Washer,Lock Tube Assembly Mounting; Used On Engine P/N 5r698 | 1 |
258-4110 Kit-Control Pattern Change -Selectable
| 25***10 | Kit-Control Pattern Change; -Selectable | 1 |
| 5P***58 | Sleeve; (Cable Splice) | 1 |
| 5P***00 | Key Total 2 Pieces Per Unit; (Literature Compartment) | 2 |
258-4111 Kit-Instrument Panel -Includes Creeper Control, Rh
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
| 25***11 | Kit-Instrument Panel; -Includes Creeper Control, Rh | 1 |
258-4045 Lever Gp-Governor
| 13***40 | Locknut; (M8x1.25-Thd) | 2 |
| 21***52 | Screw-Truss Head; (M8x1.25x30-mm) | 2 |
| 25***45 | Lever Group-Governor | 1 |
327-8941 Lever Gp-Governor
| 13***40 | Locknut; (M8x1.25-Thd) | 2 |
| 21***52 | Screw-Truss Head; (M8x1.25x30-mm) | 2 |
| 25***22 | Bracket As-Mounting; (Front) | 1 |
258-4433 Liner Gp-Cab
| 25***17 | Spring Group-Gas; -Includes Lift Handle | 1 |
| 25***66 | Installation Group-Radio | 1 |
| 25***29 | Accessory Group-Cab | 1 |
258-4020 Liner Gp-Cab
| 09***65 | Spacer; (17x40x3-mm Thk) | 2 |
| 16***95 | Washer; (16.5x71.5x3-mm Thk) | 4 |
| 19***37 | Insert-Threaded; (M8x1.25-Thd) | 1 |
258-4265 Lines Gp-Air Conditioner
| 08***77 | Lamp Group-Dome; (12-Volt) | 1 |
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 74 |
| 09***34 | Terminal-Blade; (18-Ga To 22-Ga) | 4 |
258-4255 Lines Gp-Heater
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 13***42 | Screw-Self-Tapping; (M5x2.3x18.8-mm) | 4 |
| 25***55 | Lines Group-Heater | 1 |
6v-1970 Literature Gp
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 4 |
| 12***78 | Locknut; (M6x1-Thd) | 1 |
| 16***43 | Sensor Group-Position; -Brake Pedal | 1 |
305-8034 Mirror Gp-Rear View
| 25***43 | Pedal Group-Governor | 1 |
| 25***73 | Cable As; (Hand Control) | 1 |
| 28***44 | Cable As; (Low Idle) | 1 |
258-4230 Mirror Gp-Rear View
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 4 |
| 12***78 | Locknut; (M6x1-Thd) | 1 |
| 16***54 | Kit-Service; (Pedal) | 1 |
330-5011 Motor Gp-Window Wiper
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 4 |
| 12***78 | Locknut; (M6x1-Thd) | 1 |
| 16***54 | Kit-Service; (Pedal) | 1 |
295-3172 Mounting Gp-Armrest -Rh
| 19***54 | Sleeve | 1 |
| 29***72 | Mounting Group-Armrest; -Rh | 1 |
295-3171 Mounting Gp-Armrest -Lh
| 25***73 | Cable As; (Hand Control) | 1 |
| 29***71 | Mounting Group-Armrest; -Lh | 1 |
| 2R***64 | Ring-Retaining | 1 |
258-4220 Mounting Gp-Rops -Includes Step
| 13***90 | Bushing; (Radio Mount) | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 17***37 | Connector; (Radio) | 1 |
258-3740 Option Ar-Cab
| 13***66 | Lead-Antenna | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 17***17 | Support-Radio | 1 |
258-3738 Option Ar-Cab
| 19***54 | Sleeve | 1 |
| 25***38 | Option Ar-Cab | 1 |
258-4162 Panel Gp-Instrument
| 19***54 | Sleeve | 1 |
| 25***62 | Panel Group-Instrument | 1 |
258-4163 Panel Gp-Instrument -Rh
| 19***54 | Sleeve | 1 |
| 25***63 | Panel Group-Instrument; -Rh | 1 |
327-8937 Pedal Gp-Governor
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 16***72 | Speaker As-Radio | 2 |
| 17***37 | Connector; (Radio) | 1 |
258-4043 Pedal Gp-Governor
| 13***90 | Bushing; (Radio Mount) | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 17***37 | Connector; (Radio) | 1 |
325-8383 Pedal Gp-Governor
| 19***54 | Sleeve | 1 |
| 32***83 | Pedal Group-Governor | 1 |
280-6342 Pedal Gp-Governor
| 19***54 | Sleeve | 1 |
| 28***42 | Pedal Group-Governor | 1 |
284-8955 Radio Gp -Am/Fm/Wb/Sirius/ Cd Player
| 25***50 | Seat & Mounting Group; -Static | 1 |
| 25***14 | Cover Group-Console; -Rh, Lh | 1 |
| 28***55 | Radio Group; -Am/Fm/Wb/Sirius/ Cd Player | 1 |
200-5729 Radio Gp -Am/Fm/Wb
| 20***29 | Radio Group; -Am/Fm/Wb | 1 |
| 25***55 | Seat Group-Suspension; -Air | 1 |
| 25***11 | Armrest & Mounting Group | 1 |
284-8954 Radio Gp -Am/Fm/Wb/Xm/ Cd Player
| 15***83 | Washer-Hard; (8.4x35x2.5-mm Thk) | 4 |
| 25***01 | Seat & Armrest Group | 1 |
| 28***54 | Radio Group; -Am/Fm/Wb/Xm/ Cd Player | 1 |
288-1744 Radio Gp -Am/Fm/Wb/Cd Player
| 25***52 | Seat & Mounting Group | 1 |
| 25***14 | Cover Group-Console; -Rh, Lh | 1 |
| 28***44 | Radio Group; -Am/Fm/Wb/Cd Player | 1 |
331-5292 Radio Gp -Am, Fm
| 2D***12 | Washer; (7/16x15/16x1/4-In Thk) | 2 |
| 33***92 | Radio Group; -Am/Fm/Wb | 1 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 2 |
284-8953 Radio Gp -Am/Fm/Wb/Cd Player
| 15***83 | Washer-Hard; (8.4x35x2.5-mm Thk) | 4 |
| 25***02 | Seat & Armrest Group; -Suspension | 1 |
| 28***53 | Radio Group; -Am/Fm/Wb/Cd Player | 1 |
262-9163 Radio Gp -Am/Fm Cassette
| 15***83 | Washer-Hard; (8.4x35x2.5-mm Thk) | 4 |
| 25***03 | Seat & Armrest Group; -Static | 1 |
| 26***63 | Radio Group; -Am/Fm/Wb/Cd Player | 1 |
241-4936 Radio Gp -Am/Fm/Wb/Cd Player
| 24***36 | Radio Group; -Am/Fm/Wb/Cd Player | 1 |
| 25***49 | Support As-Seat | 1 |
| 25***53 | Seat Group; -Static | 1 |
233-3123 Radio Gp -Am/Fm/Wb
| 23***23 | Radio Group; -Am/Fm/Wb | 1 |
| 25***54 | Seat Group-Suspension; -Mechanical | 1 |
| 25***11 | Armrest & Mounting Group | 1 |
337-3992 Radio Gp -Am/Fm
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 21***58 | Conduit-Flexible; (227-cm) | 0 |
| 22***57 | Bolt; (5/16-18-Thd) | 2 |
331-5291 Radio Gp -Am/Fm/Wb/Cd Player
| 2D***12 | Washer; (7/16x15/16x1/4-In Thk) | 2 |
| 33***91 | Radio Group; -Am/Fm/Wb/Cd Player | 1 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 2 |
258-4402 Seat & Armrest Gp -Suspension
| 09***68 | Washer; (5x16x1.2-mm Thk) | 2 |
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 2 |
| 13***90 | Bolt-Carriage; (M8x1.25x30-mm) | 2 |
258-4401 Seat & Armrest Gp
| 09***68 | Washer; (5x16x1.2-mm Thk) | 2 |
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 2 |
| 13***90 | Bolt-Carriage; (M8x1.25x30-mm) | 2 |
258-4403 Seat & Armrest Gp -Static
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 4 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
258-4052 Seat & Mounting Gp
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***11 | Screw-Machine; (3/8-16x0.75-In) | 1 |
258-4050 Seat & Mounting Gp -Static
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 4 |
| 1P***10 | Washer; (0.391x0.812x0.067-In Thk) | 4 |
| 25***50 | Seat & Mounting Group; -Static | 1 |
258-4051 Seat & Mounting Gp -Suspension
| 09***25 | Pin-Clevis | 1 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 2 |
| 15***82 | Spring-Gas; (Non-Locking) | 1 |
258-4310 Seat Ar -Static
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 2 |
| 09***78 | Pin-Spring | 1 |
| 14***08 | Fastener | 13 |
258-4330 Seat Ar-Suspension -Air
| 1D***77 | Bolt-Round Head; (3/8-16x1-In) | 2 |
| 25***30 | Seat Ar-Suspension; -Air | 1 |
| 5T***69 | Clamp | 2 |
258-4320 Seat Ar-Suspension -Mechanical
| 17***91 | Nut-Spring | 4 |
| 25***33 | Visor Group-Cab; -Lh | 1 |
| 25***20 | Seat Ar-Suspension; -Mechanical | 1 |
258-4095 Seat Belt Gp -Retractable
| 25***83 | Window As; (Lh Front Sliding Glass) | 1 |
| 25***84 | Window As; (Lh Rear Sliding Glass) | 1 |
| 25***65 | Latch As | 1 |
258-4096 Seat Belt Gp -Retractable
| 25***82 | Frame As; (Rh) | 1 |
| 25***65 | Latch As | 1 |
| 25***76 | Catch As; (Inner) | 1 |
273-5913 Seat Gp -Cloth, Suspension
| 25***85 | Window Group-Cab; -Side, Lh | 1 |
| 25***86 | Window Group-Cab; -Side, Rh | 1 |
| 27***42 | Screw-Truss Head; (M6x1x20-mm) | 18 |
305-7096 Seat Gp -Vinyl
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 1 |
| 27***42 | Screw-Truss Head; (M6x1x20-mm) | 1 |
| 28***05 | Bracket As | 1 |
258-4053 Seat Gp -Static
| 10***57 | Strip; (Locking) (275cm) | 0 |
| 10***56 | Seal; (275cm) | 0 |
| 25***11 | Glass-Rear | 1 |
258-4054 Seat Gp-Suspension -Mechanical
| 25***13 | Film-Identification; (262c, Lh) | 1 |
| 25***14 | Film-Identification; (262c, Rh) | 1 |
| 25***23 | Film-Identification; (Caterpillar) | 1 |
258-4055 Seat Gp-Suspension -Air
| 25***31 | Film-Identification; (High Flow Xps) | 2 |
| 25***55 | Seat Group-Suspension; -Air | 1 |
258-4017 Spring Gp-Gas -Includes Lift Handle
| 25***17 | Spring Group-Gas; -Includes Lift Handle | 1 |
| 29***10 | Film-Identification; (Two Speed) | 2 |
273-5914 Suspension Gp-Seat -Air
| 12***59 | Clamp-Hose | 2 |
| 12***71 | Clamp-Hose | 1 |
| 18***07 | Clamp-Hose | 1 |
273-9611 Suspension Gp-Seat -Mechanical
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 15***35 | Film-Warning; (Crush Hazard, Stay Back) | 1 |
| 22***42 | Film-Warning; (Crush Hazard, Stay Back, U.S.) | 2 |
258-3497 Visor Gp-Cab
| 15***53 | Film-Information; (Read Omm) | 1 |
| 16***76 | Film; (Identification) (12v) (On Rear Console Behind Operators Seat) | 1 |
| 21***02 | Film-Warning; (No Weld, No Drill, Read Omm) | 1 |
258-4233 Visor Gp-Cab -Lh
| 15***53 | Film-Information; (Read Omm) | 1 |
| 16***76 | Film; (Identification) (12v) (On Rear Console Behind Operators Seat) | 1 |
| 21***02 | Film-Warning; (No Weld, No Drill, Read Omm) | 1 |
258-3285 Window Gp-Cab -Side, Lh
| 15***53 | Film-Information; (Read Omm) | 1 |
| 16***76 | Film; (Identification) (12v) (On Rear Console Behind Operators Seat) | 1 |
| 21***02 | Film-Warning; (No Weld, No Drill, Read Omm) | 1 |
258-4010 Window Gp-Cab
| 16***89 | Tack-Fastener | 4 |
| 22***69 | Film-Warning; (Do Not Operate, Read Omm) | 1 |
| 24***18 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
258-4090 Window Gp-Cab -Side
| 19***10 | Film-Identification; (Synthetic Hydraulic Oil, Read Omm) | 2 |
| 25***90 | Window Group-Cab; -Side | 1 |
258-3286 Window Gp-Cab -Side, Rh
| 15***53 | Film-Information; (Read Omm) | 1 |
| 16***76 | Film; (Identification) (12v) (On Rear Console Behind Operators Seat) | 1 |
| 21***02 | Film-Warning; (No Weld, No Drill, Read Omm) | 1 |
Power Train
258-2857 Axle Gp -Standard
| 15***49 | Cable-Electrical; (03050 mm ) | 0 |
| 15***50 | Cable; (00-Ga, Black)(183-cm Each) | 0 |
| 17***20 | Strap-Dual Clamp | 5 |
258-3736 Axle Gp -Standard
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***62 | Screw-Machine; (4-40x0.63-In) | 4 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
300-7627 Drive Gp-Tandem
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***39 | Relay As | 5 |
258-2862 Drive Gp-Tandem
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
258-2860 Drive Gp-Tandem
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
258-2581 Filter & Lines Gp-Hydraulic
| 14***23 | Housing-Axle | 1 |
| 14***29 | Spacer; (57.16x69.85x27.54-mm Thk) | 1 |
| 15***52 | Seal-Lip Type | 1 |
223-9974 Filter Gp-Oil -Hydraulic
| 22***74 | Filter Group-Oil; -Hydraulic | 1 |
| 25***57 | Axle Group; -Standard | 4 |
258-2431 Lines Gp-Hydrostatic
| 14***82 | Elbow As | 2 |
| 17***20 | Strap-Dual Clamp | 1 |
| 19***40 | Connector As | 1 |
258-2430 Lines Gp-Hydrostatic
| 10***66 | Bolt; (Self Locking) (M16x2x40mm) | 4 |
| 14***33 | Retainer | 2 |
| 14***36 | Nut; (9/16-18-Thd) | 32 |
258-2607 Lines Gp-Parking Brake
| 10***21 | Connector | 1 |
| 14***39 | Connector As. | 3 |
| 14***58 | Elbow As | 1 |
258-3151 Manifold & Lines Gp-Control -Motor, 2-Speed
| 10***21 | Connector | 1 |
| 14***27 | Connector Group | 3 |
| 14***39 | Connector As. | 3 |
258-2589 Manifold Gp-Return
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***18 | Connector As | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
258-2416 Motor & Mtg Gp-Hydrostatic
| 10***93 | Poppet | 1 |
| 14***27 | Connector Group | 2 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 1 |
258-2409 Motor & Mtg Gp-Hydrostatic
| 10***93 | Poppet | 1 |
| 14***27 | Connector Group | 2 |
| 14***62 | Elbow Group | 1 |
258-2408 Motor & Mtg Gp-Hydrostatic
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***18 | Connector As | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
258-2442 Motor Gp-Piston
| 17***05 | Bolt-Socket Head; (M8x1.25x12-mm) | 2 |
| 25***42 | Motor Group-Piston | 3 |
| 26***64 | Sensor Group-Speed; -Motor | 2 |
258-2521 Motor Gp-Piston -2-Speed, Rh
| 17***05 | Bolt-Socket Head; (M8x1.25x12-mm) | 2 |
| 25***21 | Motor Group-Piston; -2-Speed, Rh | 1 |
| 25***05 | Motor Group-Piston | 2 |
258-2520 Motor Gp-Piston -2-Speed, Lh
| 17***05 | Bolt-Socket Head; (M8x1.25x12-mm) | 2 |
| 25***20 | Motor Group-Piston; -2-Speed, Lh | 2 |
| 25***21 | Motor Group-Piston; -2-Speed, Rh | 1 |
258-2605 Motor Gp-Piston
| 25***05 | Motor Group-Piston | 1 |
| 28***37 | Kit-Valve; (Distribution) | 1 |
| 28***38 | Kit-Bearing; (Piston Motor) | 1 |
258-3318 Mounting Gp-Pump
| 25***18 | Mounting Group-Pump | 1 |
| 28***38 | Kit-Bearing; (Piston Motor) | 1 |
| 28***39 | Stud | 6 |
258-3400 Power Train Ar -2-Speed
| 25***00 | Power Train Ar; -2-Speed | 1 |
| 28***37 | Kit-Valve; (Distribution) | 1 |
| 28***38 | Kit-Bearing; (Piston Motor) | 1 |
258-3200 Power Train Ar
| 25***00 | Power Train Ar | 1 |
| 28***38 | Kit-Bearing; (Piston Motor) | 1 |
| 28***39 | Stud | 6 |
300-7637 Power Train Ar -Extreme Service Power Train
| 22***35 | Flange | 1 |
| 25***19 | Plate-Adapter | 1 |
| 30***37 | Power Train Ar; -Extreme Service Power Train | 1 |
258-2406 Pump & Mtg Gp-Hydrostatic
| 25***06 | Pump & Mtg Group-Hydrostatic | 1 |
| 25***08 | Motor & Mtg Group-Hydrostatic | 1 |
| 25***30 | Lines Group-Hydrostatic | 1 |
300-7640 Pump & Mtg Gp-Hydrostatic
| 25***09 | Motor & Mtg Group-Hydrostatic | 1 |
| 25***31 | Lines Group-Hydrostatic | 1 |
| 25***62 | Drive Group-Tandem | 1 |
289-6362 Pump Gp-Piston -Hydrostatic
| 09***94 | Ring-Retaining | 1 |
| 16***42 | Washer-Hard; (14.8x27x3-mm Thk) | 2 |
| 16***39 | Bolt; (M14x2x40-mm) | 2 |
258-2404 Pump Gp-Piston -Hydrostatic
| 25***04 | Pump Group-Piston; -Hydrostatic | 1 |
| 25***16 | Motor & Mtg Group-Hydrostatic | 1 |
| 25***30 | Lines Group-Hydrostatic | 1 |
154-3980 Tire & Rim Gp -Lh
| 14***26 | Tire; (12-R16.5) | 1 |
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
142-8738 Tire & Rim Gp -Lh
| 14***38 | Tire & Rim Group; -Lh | 1 |
| 27***36 | Kit-Seal; (Piston Pump) | 1 |
| 27***37 | Valve Group-Pump Control | 2 |
154-3981 Tire & Rim Gp -Rh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 15***81 | Tire & Rim Group; -Rh | 1 |
165-4907 Tire & Rim Gp -Heavy-Duty, Rh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 16***07 | Tire & Rim Group; -Heavy-Duty, Rh | 1 |
228-9221 Tire & Rim Gp
| 15***99 | Valve As-Tire | 1 |
| 17***70 | Wheel As | 1 |
| 19***40 | Tire; (33/15.5-16.5) | 1 |
165-4902 Tire & Rim Gp -Heavy-Duty, Rh
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 15***82 | Tire; (12-R16.5) | 1 |
265-2901 Tire & Rim Gp -Rh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 22***63 | Tire; (12-16.5) | 1 |
165-4906 Tire & Rim Gp -Heavy-Duty, Lh
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 15***82 | Tire; (12-R16.5) | 1 |
185-9929 Tire & Rim Gp -Rh
| 15***99 | Valve As-Tire | 1 |
| 18***29 | Tire & Rim Group; -Rh | 1 |
| 18***35 | Tire; (305-546) | 1 |
188-0125 Tire & Rim Gp -Rh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***33 | Tire; (12-16.5) | 1 |
185-9930 Tire & Rim Gp -Lh
| 15***99 | Valve As-Tire | 1 |
| 18***30 | Tire & Rim Group; -Lh | 1 |
| 18***35 | Tire; (305-546) | 1 |
265-2899 Tire & Rim Gp -Rh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 22***69 | Tire; (12-R16.5) | 1 |
154-3978 Tire & Rim Gp -Lh
| 14***26 | Tire; (12-R16.5) | 1 |
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
185-8677 Tire & Rim Gp -Rh
| 15***99 | Valve As-Tire | 1 |
| 18***77 | Tire & Rim Group; -Rh | 1 |
| 18***35 | Tire; (305-546) | 1 |
185-9928 Tire & Rim Gp -Lh
| 15***99 | Valve As-Tire | 1 |
| 18***28 | Tire & Rim Group; -Lh | 1 |
| 18***35 | Tire; (305-546) | 1 |
199-5438 Tire & Rim Gp -Lh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***33 | Tire; (12-16.5) | 1 |
265-2900 Tire & Rim Gp -Lh
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 22***69 | Tire; (12-R16.5) | 1 |
185-9931 Tire & Rim Gp -Rh
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***31 | Tire & Rim Group; -Rh | 1 |
188-0124 Tire & Rim Gp -Lh
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***33 | Tire; (12-16.5) | 1 |
265-2898 Tire & Rim Gp -Lh
| 15***99 | Valve As-Tire | 1 |
| 17***70 | Wheel As | 1 |
| 19***40 | Tire; (33/15.5-16.5) | 1 |
165-4901 Tire & Rim Gp -Heavy-Duty, Lh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 15***82 | Tire; (12-R16.5) | 1 |
142-8728 Tire & Rim Gp -Lh
| 09***94 | Ring-Retaining | 1 |
| 14***28 | Tire & Rim Group; -Lh | 1 |
| 16***42 | Washer-Hard; (14.8x27x3-mm Thk) | 2 |
185-8676 Tire & Rim Gp -Lh
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 16***09 | Tire; (12-16.5) | 1 |
185-8674 Tire & Rim Gp -Lh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 16***09 | Tire; (12-16.5) | 1 |
154-3979 Tire & Rim Gp -Rh
| 14***26 | Tire; (12-R16.5) | 1 |
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
199-5439 Tire & Rim Gp -Rh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***33 | Tire; (12-16.5) | 1 |
228-9220 Tire & Rim Gp
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***33 | Tire; (12-16.5) | 1 |
142-8737 Tire & Rim Gp -Rh
| 14***37 | Tire & Rim Group; -Rh | 1 |
| 27***35 | Kit-Cylinder Block | 2 |
| 27***36 | Kit-Seal; (Piston Pump) | 1 |
142-9025 Tire & Rim Gp -Rh
| 14***26 | Tire; (12-R16.5) | 1 |
| 14***31 | Wheel As | 1 |
| 14***25 | Tire & Rim Group; -Rh | 1 |
185-8675 Tire & Rim Gp -Rh
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 16***09 | Tire; (12-16.5) | 1 |
187-3239 Wheel & Tire Ar
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***76 | Tire & Rim Group; -Lh | 2 |
| 18***77 | Tire & Rim Group; -Rh | 2 |
185-8662 Wheel & Tire Ar -Low Side Wall
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 16***01 | Tire & Rim Group; -Heavy-Duty, Lh | 2 |
| 16***02 | Tire & Rim Group; -Heavy-Duty, Rh | 2 |
228-9217 Wheel & Tire Ar
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***28 | Tire & Rim Group; -Lh | 2 |
| 18***29 | Tire & Rim Group; -Rh | 2 |
228-9219 Wheel & Tire Ar
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***30 | Tire & Rim Group; -Lh | 2 |
| 18***31 | Tire & Rim Group; -Rh | 2 |
185-8666 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***66 | Wheel & Tire Ar; -Heavy Duty | 1 |
| 19***38 | Tire & Rim Group; -Lh | 2 |
252-0346 Wheel & Tire Ar
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***24 | Tire & Rim Group; -Lh | 2 |
| 18***25 | Tire & Rim Group; -Rh | 2 |
185-8663 Wheel & Tire Ar -Low Side Wall
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 16***06 | Tire & Rim Group; -Heavy-Duty, Lh | 2 |
| 16***07 | Tire & Rim Group; -Heavy-Duty, Rh | 2 |
252-0377 Wheel & Tire Ar -Solid
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 25***77 | Wheel & Tire Ar; -Solid | 1 |
| 26***98 | Tire & Rim Group; -Lh | 2 |
165-4903 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 15***80 | Tire & Rim Group; -Lh | 2 |
| 15***81 | Tire & Rim Group; -Rh | 2 |
185-8667 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***67 | Wheel & Tire Ar; -Heavy Duty | 1 |
| 18***74 | Tire & Rim Group; -Lh | 2 |
252-0366 Wheel & Tire Ar -Solid
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 22***21 | Tire & Rim Group | 4 |
| 25***66 | Wheel & Tire Ar; -Solid | 1 |
142-7494 Wheel & Tire Ar -Pneumatic
| 14***94 | Wheel & Tire Ar; -Pneumatic | 1 |
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
154-3973 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 14***28 | Tire & Rim Group; -Lh | 2 |
| 14***37 | Tire & Rim Group; -Rh | 2 |
159-5761 Wheel & Tire Ar -Solid
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 14***38 | Tire & Rim Group; -Lh | 2 |
| 14***25 | Tire & Rim Group; -Rh | 2 |
252-0347 Wheel & Tire Ar
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 22***20 | Tire & Rim Group | 4 |
| 25***47 | Wheel & Tire Ar | 1 |
154-3972 Wheel & Tire Ar -Heavy Duty
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 15***72 | Wheel & Tire Ar; -Heavy Duty | 1 |
165-4898 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 15***78 | Tire & Rim Group; -Lh | 2 |
| 15***79 | Tire & Rim Group; -Rh | 2 |
178-2256 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 17***56 | Wheel & Tire Ar; -Heavy Duty | 1 |
| 18***30 | Tire-Solid; (33x6x8) | 4 |
142-7495 Wheel & Tire Ar -Pneumatic
| 14***95 | Wheel & Tire Ar; -Pneumatic | 1 |
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
259-9892 Wheel & Tire Gp
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 25***92 | Wheel & Tire Group | 1 |
| 26***00 | Tire & Rim Group; -Lh | 2 |
317-0691 Wheel & Tire Gp
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 22***34 | Tire-Solid; (33x6x11)(Rh) | 2 |
| 22***35 | Tire-Solid; (33x6x11)(Rh) | 2 |
Service Equipment And Supplies
280-8329 Bracket Gp-Mounting -Belt Guard
| 28***29 | Bracket Group-Mounting; -Belt Guard | 1 |
258-3230 Film Gp -High Flow Xps
| 25***30 | Film Group; -High Flow Xps | 1 |
289-0848 Film Gp -2-Speed
| 28***48 | Film Group; -2-Speed | 1 |
258-3192 Film Gp -262c
| 25***92 | Film Group; -262c | 1 |
348-6735 Kit-Muffler
| 34***35 | Kit-Muffler | 1 |
258-3222 Plate & Film Gp
| 25***22 | Plate & Film Group | 1 |
304-5237 Plate & Film Gp
| 30***37 | Plate & Film Group | 1 |
258-3226 Plate & Film Gp
| 25***26 | Plate & Film Group | 1 |
286-9251 Plate & Film Gp
| 28***51 | Plate & Film Group | 1 |
247-0678 Plate & Film Gp
| 24***78 | Plate & Film Group | 1 |
Work Tools
216-8756 Arm Gp-Material Handling
| 15***40 | Pin | 2 |
| 16***19 | Pin As | 2 |
| 17***21 | Pin As | 2 |
177-1990 Blade Ar -Angling
| 16***89 | Tack-Fastener | 4 |
| 17***90 | Blade Ar; -Angling | 1 |
| 22***12 | Blade As-Angling | 1 |
231-5277 Blade Ar -Angling
| 15***77 | Edge | 1 |
| 23***77 | Blade Ar; -Angling | 1 |
231-5275 Blade Ar -Angling
| 16***89 | Tack-Fastener | 4 |
| 22***45 | Edge Group-Bit & Cutting | 1 |
| 22***25 | Frame Group-Blade | 1 |
177-1989 Blade Ar -Angling
| 15***40 | Pin | 2 |
| 16***19 | Pin As | 2 |
| 17***21 | Pin As | 2 |
177-1987 Blade As-Angling
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 17***87 | Blade As-Angling | 1 |
177-1988 Blade As-Angling
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***80 | Blade Group-Multipurpose Bucket | 1 |
| 16***89 | Tack-Fastener | 4 |
230-4596 Blade As-Angling
| 15***37 | Edge | 1 |
| 23***96 | Blade As-Angling | 1 |
222-7412 Blade As-Angling
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 22***12 | Blade As-Angling | 1 |
177-1981 Blade Gp-Angling
| 15***59 | Edge | 1 |
| 17***81 | Blade Group-Angling | 1 |
177-1982 Blade Gp-Angling
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 17***82 | Blade Group-Angling | 1 |
231-5276 Blade Gp-Angling
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 23***76 | Blade Group-Angling | 1 |
222-7724 Blade Gp-Angling
| 15***77 | Edge | 1 |
| 22***24 | Blade Group-Angling | 1 |
325-7039 Blade Gp-Multipurpose Bucket
| 13***87 | Edge Group-Cutting | 1 |
| 26***84 | Bucket Group-Dirt | 1 |
| 32***39 | Blade Group-Multipurpose Bucket | 1 |
159-5347 Blade Gp-Multipurpose Bucket
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***47 | Blade Group-Multipurpose Bucket | 1 |
| 16***89 | Tack-Fastener | 4 |
279-5406 Blade Gp-Multipurpose Bucket
| 19***16 | Edge | 1 |
| 27***06 | Blade Group-Multipurpose Bucket | 1 |
| 32***64 | Guard As; (78-In) | 1 |
325-7059 Blade Gp-Multipurpose Bucket
| 13***86 | Edge Group-Cutting | 1 |
| 28***89 | Bucket As-Dirt | 1 |
| 32***59 | Blade Group-Multipurpose Bucket | 1 |
293-0142 Blade Gp-Multipurpose Bucket
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 29***42 | Blade Group-Multipurpose Bucket | 1 |
279-5384 Blade Gp-Multipurpose Bucket
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***84 | Blade Group-Multipurpose Bucket | 1 |
325-7078 Blade Gp-Multipurpose Bucket
| 13***85 | Edge Group-Cutting | 1 |
| 27***68 | Bucket As-General Purpose | 1 |
| 32***78 | Blade Group-Multipurpose Bucket | 1 |
325-7038 Blade Gp-Multipurpose Bucket
| 29***44 | Edge | 1 |
| 32***38 | Blade Group-Multipurpose Bucket, Protective Cover | 1 |
| 32***74 | Guard As; (84-In) | 1 |
154-5080 Blade Gp-Multipurpose Bucket
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***80 | Blade Group-Multipurpose Bucket | 1 |
| 16***89 | Tack-Fastener | 4 |
279-5396 Blade Gp-Multipurpose Bucket
| 15***77 | Edge | 1 |
| 27***96 | Blade Group-Multipurpose Bucket | 1 |
| 32***54 | Guard As; (72-In) | 1 |
325-7079 Blade Gp-Multipurpose Bucket
| 14***99 | Tooth Group-Uni | 8 |
| 27***68 | Bucket As-General Purpose | 1 |
| 32***79 | Blade Group-Multipurpose Bucket | 1 |
279-5388 Blade Gp-Multipurpose Bucket
| 15***59 | Edge | 1 |
| 27***88 | Blade Group-Multipurpose Bucket | 1 |
| 32***44 | Guard As; (66-In) | 1 |
279-5395 Blade Gp-Multipurpose Bucket
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***95 | Blade Group-Multipurpose Bucket | 1 |
279-5385 Blade Gp-Multipurpose Bucket
| 15***37 | Edge | 1 |
| 27***85 | Blade Group-Multipurpose Bucket | 1 |
| 32***34 | Guard As; (60-In) | 1 |
159-5345 Blade Gp-Multipurpose Bucket
| 15***45 | Blade Group-Multipurpose Bucket | 1 |
| 19***16 | Edge | 1 |
325-7069 Blade Gp-Multipurpose Bucket
| 14***99 | Tooth Group-Uni | 8 |
| 27***64 | Bucket As-General Purpose | 1 |
| 32***69 | Blade Group-Multipurpose Bucket | 1 |
325-7068 Blade Gp-Multipurpose Bucket
| 13***84 | Edge Group-Cutting | 1 |
| 27***64 | Bucket As-General Purpose | 1 |
| 32***68 | Blade Group-Multipurpose Bucket | 1 |
279-5387 Blade Gp-Multipurpose Bucket
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***87 | Blade Group-Multipurpose Bucket | 1 |
325-7048 Blade Gp-Multipurpose Bucket
| 13***83 | Edge Group-Cutting | 1 |
| 27***34 | Bucket As-Dirt | 1 |
| 32***48 | Blade Group-Multipurpose Bucket | 1 |
325-7049 Blade Gp-Multipurpose Bucket
| 13***84 | Edge Group-Cutting | 1 |
| 27***37 | Bucket As-Dirt | 1 |
| 32***49 | Blade Group-Multipurpose Bucket | 1 |
325-7058 Blade Gp-Multipurpose Bucket
| 13***85 | Edge Group-Cutting | 1 |
| 27***40 | Bucket As-Dirt | 1 |
| 32***58 | Blade Group-Multipurpose Bucket | 1 |
279-5405 Blade Gp-Multipurpose Bucket
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***05 | Blade Group-Multipurpose Bucket | 1 |
279-5441 Bucket Ar-Dirt
| 14***99 | Tooth Group-Uni | 9 |
| 27***76 | Bucket As-General Purpose | 1 |
| 27***41 | Bucket Ar-Dirt | 1 |
285-6090 Bucket Ar-Dirt
| 19***24 | Edge Group-Cutting | 1 |
| 28***90 | Bucket Ar-Dirt, Turbocharger | 1 |
| 29***70 | Bucket As-General Purpose; -High Capacity | 1 |
279-5438 Bucket Ar-Dirt
| 13***87 | Edge Group-Cutting | 1 |
| 27***76 | Bucket As-General Purpose | 1 |
| 27***38 | Bucket Ar-Dirt | 1 |
279-5435 Bucket Ar-Dirt
| 14***99 | Tooth Group-Uni | 8 |
| 27***72 | Bucket As-General Purpose | 1 |
| 27***35 | Bucket Ar-Dirt | 1 |
268-4083 Bucket Ar-Dirt
| 13***86 | Edge Group-Cutting | 1 |
| 26***83 | Bucket Ar-Dirt | 1 |
| 27***72 | Bucket As-General Purpose | 1 |
279-5378 Bucket Ar-General Purpose
| 13***87 | Edge Group-Cutting | 1 |
| 21***29 | Bucket Ar-Grapple | 1 |
| 27***78 | Bucket Ar-General Purpose | 1 |
279-5374 Bucket Ar-General Purpose
| 13***86 | Edge Group-Cutting | 1 |
| 15***25 | Bucket Ar-Grapple; -Industrial | 1 |
| 27***74 | Bucket Ar-General Purpose | 1 |
296-8192 Bucket Ar-General Purpose
| 28***99 | Bucket Group-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
| 29***92 | Bucket Ar-General Purpose | 1 |
279-5365 Bucket Ar-General Purpose
| 15***84 | Bucket Group-Grapple; -Industrial | 1 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***87 | Lines Group-Grapple; -Industrial | 1 |
279-5377 Bucket Ar-General Purpose
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***87 | Lines Group-Grapple; -Industrial | 1 |
| 21***28 | Bucket Group-Grapple | 1 |
279-5373 Bucket Ar-General Purpose
| 13***85 | Edge Group-Cutting | 1 |
| 15***24 | Bucket Ar-Grapple | 1 |
| 27***73 | Bucket Ar-General Purpose | 1 |
279-5366 Bucket Ar-General Purpose
| 15***85 | Bucket Group-Grapple; -Industrial | 1 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***87 | Lines Group-Grapple; -Industrial | 1 |
279-5370 Bucket Ar-General Purpose
| 13***84 | Edge Group-Cutting | 1 |
| 15***23 | Bucket Ar-Grapple | 1 |
| 27***70 | Bucket Ar-General Purpose | 1 |
279-5369 Bucket Ar-General Purpose
| 15***86 | Bucket Group-Grapple; -Industrial | 1 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***87 | Lines Group-Grapple; -Industrial | 1 |
157-7226 Bucket Ar-Grapple
| 15***26 | Bucket Ar-Grapple; -Industrial | 1 |
| 28***48 | Mounting Group-Cylinder; -Grapple Bucket | 1 |
| 28***51 | Plate & Film Group | 1 |
157-7223 Bucket Ar-Grapple
| 15***23 | Bucket Ar-Grapple | 1 |
| 28***02 | Bucket Group-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
285-6093 Bucket Ar-Grapple
| 28***93 | Bucket Ar-Grapple | 1 |
| 29***23 | Bucket As-Light Material, Wheel Disc | 1 |
| 29***80 | Edge Group-Cutting | 1 |
285-6111 Bucket Ar-Grapple
| 15***09 | Bucket Group-Multipurpose | 1 |
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
157-7227 Bucket Ar-Grapple
| 15***27 | Bucket Ar-Grapple; -Industrial | 1 |
| 28***44 | Bucket Group-Grapple | 1 |
| 28***48 | Mounting Group-Cylinder; -Grapple Bucket | 1 |
285-6104 Bucket Ar-Grapple
| 15***05 | Bucket Group-Multipurpose | 1 |
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
217-6229 Bucket Ar-Grapple
| 13***87 | Edge Group-Cutting | 1 |
| 21***29 | Bucket Ar-Grapple | 1 |
| 27***24 | Bucket As-Light Material | 1 |
217-6230 Bucket Ar-Grapple
| 19***24 | Edge Group-Cutting | 1 |
| 21***30 | Bucket Ar-Grapple | 1 |
| 27***29 | Bucket As-Light Material | 1 |
157-7225 Bucket Ar-Grapple -Industrial
| 15***25 | Bucket Ar-Grapple; -Industrial | 1 |
| 28***01 | Bucket Ar-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
157-7224 Bucket Ar-Grapple
| 15***24 | Bucket Ar-Grapple | 1 |
| 28***00 | Bucket Ar-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
285-6112 Bucket Ar-Grapple
| 14***99 | Tooth Group-Uni | 8 |
| 15***04 | Bucket Ar-Multipurpose | 1 |
| 28***12 | Bucket Ar-Grapple | 1 |
286-9300 Bucket Ar-Grapple
| 14***99 | Tooth Group-Uni | 8 |
| 27***82 | Bucket Ar-Multipurpose | 1 |
| 28***00 | Bucket Ar-Grapple | 1 |
286-9301 Bucket Ar-Grapple
| 13***84 | Edge Group-Cutting | 1 |
| 27***82 | Bucket Ar-Multipurpose | 1 |
| 28***01 | Bucket Ar-Grapple | 1 |
158-6095 Bucket Ar-Grapple
| 13***86 | Edge Group-Cutting | 1 |
| 15***95 | Bucket Ar-Grapple; -Industrial | 1 |
| 27***21 | Bucket As-Light Material | 1 |
279-5430 Bucket Ar-Light Material
| 13***85 | Edge Group-Cutting | 1 |
| 27***90 | Bucket Ar-Multipurpose | 1 |
| 27***30 | Bucket Ar-Light Material | 1 |
296-7597 Bucket Ar-Light Material
| 14***99 | Tooth Group-Uni | 8 |
| 27***90 | Bucket Ar-Multipurpose | 1 |
| 29***97 | Bucket Ar-Light Material | 1 |
279-5420 Bucket Ar-Light Material
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
| 16***36 | Cover Group-Lines | 1 |
279-5425 Bucket Ar-Light Material
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
| 16***36 | Cover Group-Lines | 1 |
279-5391 Bucket Ar-Multipurpose
| 14***99 | Tooth Group-Uni | 9 |
| 27***91 | Bucket Ar-Multipurpose | 1 |
| 29***39 | Engine; - Assembly, Bucket Ar-Multipurpose | 1 |
325-7060 Bucket Ar-Multipurpose
| 13***86 | Edge Group-Cutting | 1 |
| 28***02 | Bucket Group-Utility | 1 |
| 32***60 | Bucket Ar-Multipurpose | 1 |
325-7076 Bucket Ar-Multipurpose
| 14***37 | Edge | 1 |
| 32***76 | Bucket Ar-Multipurpose | 1 |
296-8055 Bucket Ar-Multipurpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 16***36 | Cover Group-Lines | 1 |
| 27***69 | Cylinder Group-Hydraulic | 2 |
325-7056 Bucket Ar-Multipurpose
| 13***85 | Edge Group-Cutting | 1 |
| 28***99 | Bucket Group-Utility | 1 |
| 32***56 | Bucket Ar-Multipurpose | 1 |
325-7080 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 18***16 | Bucket As-Dirt | 1 |
325-7036 Bucket Ar-Multipurpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 16***36 | Cover Group-Lines | 1 |
| 27***69 | Cylinder Group-Hydraulic | 2 |
325-7075 Bucket Ar-Multipurpose
| 14***04 | Bucket As-Dirt | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
154-5004 Bucket Ar-Multipurpose
| 15***04 | Bucket Ar-Multipurpose | 1 |
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
325-7045 Bucket Ar-Multipurpose
| 14***99 | Tooth Group-Uni | 9 |
| 32***45 | Bucket Ar-Multipurpose | 1 |
| 32***76 | Bucket Ar-Multipurpose | 1 |
279-5401 Bucket Ar-Multipurpose
| 14***99 | Tooth Group-Uni | 8 |
| 27***01 | Bucket Ar-Multipurpose | 1 |
| 32***46 | Bucket Ar-Multipurpose | 1 |
325-7046 Bucket Ar-Multipurpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 16***36 | Cover Group-Lines | 1 |
| 27***69 | Cylinder Group-Hydraulic | 2 |
279-5392 Bucket Ar-Multipurpose
| 19***24 | Edge Group-Cutting | 1 |
| 27***92 | Bucket Ar-Multipurpose | 1 |
| 29***39 | Engine; - Assembly, Bucket Ar-Multipurpose | 1 |
279-5400 Bucket Ar-Multipurpose
| 13***84 | Edge Group-Cutting | 1 |
| 27***00 | Bucket Ar-Multipurpose | 1 |
| 32***36 | Bucket Ar-Multipurpose, Protective Cover | 1 |
279-5399 Bucket Ar-Multipurpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 16***36 | Cover Group-Lines | 1 |
| 27***69 | Cylinder Group-Hydraulic | 2 |
296-8057 Bucket Ar-Multipurpose
| 13***86 | Edge Group-Cutting | 1 |
| 29***57 | Bucket Ar-Multipurpose | 1 |
| 32***56 | Bucket Ar-Multipurpose | 1 |
279-5381 Bucket Ar-Multipurpose
| 13***87 | Edge Group-Cutting | 1 |
| 27***81 | Bucket Ar-Multipurpose | 1 |
| 27***03 | Bucket Ar-Multipurpose | 1 |
325-7040 Bucket Ar-Multipurpose
| 13***87 | Edge Group-Cutting | 1 |
| 32***40 | Bucket Ar-Multipurpose | 1 |
| 32***66 | Bucket Ar-Multipurpose | 1 |
279-5390 Bucket Ar-Multipurpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
| 16***36 | Cover Group-Lines | 1 |
325-7050 Bucket Ar-Multipurpose
| 19***24 | Edge Group-Cutting | 1 |
| 32***50 | Bucket Ar-Multipurpose | 1 |
| 32***76 | Bucket Ar-Multipurpose | 1 |
279-5382 Bucket Ar-Multipurpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
| 16***36 | Cover Group-Lines | 1 |
279-5403 Bucket Ar-Multipurpose
| 13***85 | Edge Group-Cutting | 1 |
| 27***03 | Bucket Ar-Multipurpose | 1 |
| 32***46 | Bucket Ar-Multipurpose | 1 |
325-7035 Bucket Ar-Multipurpose
| 14***99 | Tooth Group-Uni | 9 |
| 32***35 | Bucket Ar-Multipurpose | 1 |
| 32***66 | Bucket Ar-Multipurpose | 1 |
154-5010 Bucket Ar-Multipurpose
| 13***86 | Edge Group-Cutting | 1 |
| 15***10 | Bucket Ar-Multipurpose | 1 |
| 27***98 | Bucket Ar-Multipurpose | 1 |
325-7070 Bucket Ar-Multipurpose
| 15***27 | Bucket As-Dirt | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
279-5402 Bucket Ar-Multipurpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 16***36 | Cover Group-Lines | 1 |
| 27***69 | Cylinder Group-Hydraulic | 2 |
279-5380 Bucket Ar-Multipurpose
| 14***99 | Tooth Group-Uni | 9 |
| 27***80 | Bucket Ar-Multipurpose | 1 |
| 27***03 | Bucket Ar-Multipurpose | 1 |
325-7066 Bucket Ar-Multipurpose
| 14***35 | Edge | 1 |
| 32***66 | Bucket Ar-Multipurpose | 1 |
325-7055 Bucket Ar-Multipurpose
| 13***84 | Edge Group-Cutting | 1 |
| 28***96 | Bucket Group-Utility | 1 |
| 32***55 | Bucket Ar-Multipurpose | 1 |
325-7065 Bucket Ar-Multipurpose
| 14***36 | Edge | 1 |
| 32***65 | Bucket Ar-Multipurpose | 1 |
154-5046 Bucket Ar-Multipurpose
| 14***99 | Tooth Group-Uni | 8 |
| 15***46 | Bucket Ar-Multipurpose | 1 |
| 27***98 | Bucket Ar-Multipurpose | 1 |
293-0139 Bucket Ar-Multipurpose
| 14***99 | Tooth Group-Uni | 8 |
| 29***39 | Engine; - Assembly, Bucket Ar-Multipurpose | 1 |
| 32***56 | Bucket Ar-Multipurpose | 1 |
279-5398 Bucket Ar-Multipurpose
| 14***99 | Tooth Group-Uni | 8 |
| 27***98 | Bucket Ar-Multipurpose | 1 |
| 32***36 | Bucket Ar-Multipurpose, Protective Cover | 1 |
285-6100 Bucket Ar-Utility
| 14***34 | Edge | 1 |
| 28***00 | Bucket Ar-Utility | 1 |
285-6101 Bucket Ar-Utility
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***33 | Bucket As-Dirt | 1 |
285-6095 Bucket Ar-Utility
| 19***22 | Edge | 1 |
| 28***95 | Bucket Ar-Utility | 1 |
279-5433 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***63 | Bucket As-General Purpose | 1 |
188-3526 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 18***26 | Bucket As-Dirt | 1 |
285-6088 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***75 | Bucket As-General Purpose | 1 |
285-6089 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 28***89 | Bucket As-Dirt | 1 |
152-0227 Bucket As-Dirt
| 15***27 | Bucket As-Dirt | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
141-6704 Bucket As-Dirt
| 14***04 | Bucket As-Dirt | 1 |
| 14***35 | Edge | 1 |
279-5436 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***67 | Bucket As-General Purpose | 1 |
279-5439 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***71 | Bucket As-General Purpose | 1 |
165-6157 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***57 | Bucket As-Dirt | 1 |
| 16***89 | Tack-Fastener | 4 |
268-4089 Bucket As-Dirt
| 14***35 | Edge | 1 |
| 26***89 | Bucket As-Dirt | 1 |
188-2716 Bucket As-Dirt
| 14***37 | Edge | 1 |
| 18***16 | Bucket As-Dirt | 1 |
279-5437 Bucket As-Dirt
| 14***37 | Edge | 1 |
| 27***37 | Bucket As-Dirt | 1 |
279-5434 Bucket As-Dirt
| 14***36 | Edge | 1 |
| 27***34 | Bucket As-Dirt | 1 |
279-5440 Bucket As-Dirt
| 19***22 | Edge | 1 |
| 27***40 | Bucket As-Dirt | 1 |
165-6156 Bucket As-Dirt
| 14***36 | Edge | 1 |
| 16***56 | Bucket As-Dirt | 1 |
292-9270 Bucket As-General Purpose -High Capacity
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 21***26 | Bucket As-Grapple | 1 |
292-9271 Bucket As-General Purpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***22 | Bucket As-Light Material | 1 |
279-5376 Bucket As-General Purpose
| 16***30 | Plate-Identification; (Cat) | 2 |
| 19***22 | Edge | 1 |
| 27***76 | Bucket As-General Purpose | 1 |
279-5368 Bucket As-General Purpose
| 14***37 | Edge | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
| 27***68 | Bucket As-General Purpose | 1 |
279-5363 Bucket As-General Purpose
| 22***32 | Edge | 1 |
| 27***63 | Bucket As-General Purpose | 1 |
279-5375 Bucket As-General Purpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***89 | Bucket As-Grapple | 1 |
| 16***89 | Tack-Fastener | 4 |
279-5372 Bucket As-General Purpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***88 | Bucket As-Grapple | 1 |
| 16***89 | Tack-Fastener | 4 |
279-5364 Bucket As-General Purpose
| 14***35 | Edge | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
| 27***64 | Bucket As-General Purpose | 1 |
279-5367 Bucket As-General Purpose
| 14***36 | Edge | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
| 27***67 | Bucket As-General Purpose | 1 |
279-5371 Bucket As-General Purpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***87 | Bucket As-Grapple; -Industrial | 1 |
| 16***89 | Tack-Fastener | 4 |
169-8941 Bucket As-Grapple
| 16***41 | Bucket As-Grapple; -Industrial | 1 |
| 22***82 | Edge | 1 |
217-6227 Bucket As-Grapple
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***32 | Bucket As-Utility | 1 |
| 16***89 | Tack-Fastener | 4 |
169-8943 Bucket As-Grapple
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 16***43 | Bucket As-Grapple | 1 |
169-8942 Bucket As-Grapple
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 16***42 | Bucket As-Grapple; -Industrial | 1 |
156-0887 Bucket As-Grapple
| 14***37 | Edge | 1 |
| 15***87 | Bucket As-Grapple; -Industrial | 1 |
156-0888 Bucket As-Grapple
| 15***88 | Bucket As-Grapple | 1 |
| 19***22 | Edge | 1 |
156-0889 Bucket As-Grapple
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***89 | Bucket As-Grapple | 1 |
| 16***89 | Tack-Fastener | 4 |
217-6226 Bucket As-Grapple
| 21***26 | Bucket As-Grapple | 1 |
| 29***57 | Edge | 1 |
292-9224 Bucket As-Light Material
| 13***85 | Edge Group-Cutting | 1 |
| 16***57 | Bucket As-Dirt | 1 |
| 29***24 | Bucket As-Light Material, Tyre/Tire, Tyre/Tire; Tire | 1 |
279-5423 Bucket As-Light Material
| 14***35 | Edge | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
| 27***23 | Bucket As-Light Material | 1 |
279-5424 Bucket As-Light Material
| 14***35 | Edge | 1 |
| 27***24 | Bucket As-Light Material | 1 |
279-5428 Bucket As-Light Material
| 14***36 | Edge | 1 |
| 27***28 | Bucket As-Light Material | 1 |
292-9223 Bucket As-Light Material
| 13***84 | Edge Group-Cutting | 1 |
| 16***56 | Bucket As-Dirt | 1 |
| 29***23 | Bucket As-Light Material, Wheel Disc | 1 |
279-5429 Bucket As-Light Material
| 14***37 | Edge | 1 |
| 27***29 | Bucket As-Light Material | 1 |
279-5422 Bucket As-Light Material
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***37 | Bucket As-Utility | 1 |
| 16***89 | Tack-Fastener | 4 |
279-5421 Bucket As-Light Material
| 11***83 | Boss; (M10x1.5-Thd) | 4 |
| 14***36 | Edge | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
165-8832 Bucket As-Utility
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***32 | Bucket As-Utility | 1 |
| 16***89 | Tack-Fastener | 4 |
285-6098 Bucket As-Utility
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***43 | Bucket As-Grapple | 1 |
285-6103 Bucket As-Utility
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 21***27 | Bucket As-Grapple | 1 |
165-8746 Bucket As-Utility
| 13***86 | Edge Group-Cutting | 1 |
| 16***46 | Bucket As-Utility | 1 |
| 18***26 | Bucket As-Dirt | 1 |
285-6097 Bucket As-Utility
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***42 | Bucket As-Grapple; -Industrial | 1 |
165-8835 Bucket As-Utility
| 14***99 | Tooth Group-Uni | 9 |
| 16***35 | Bucket As-Utility | 1 |
| 29***70 | Bucket As-General Purpose; -High Capacity | 1 |
165-8837 Bucket As-Utility
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***37 | Bucket As-Utility | 1 |
188-2719 Bucket Gp-Dirt
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 18***19 | Bucket Group-Dirt | 1 |
152-0231 Bucket Gp-Dirt
| 15***31 | Bucket Group-Dirt | 1 |
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
268-4084 Bucket Gp-Dirt
| 14***32 | Clam As-Multipurpose Bucket | 1 |
| 15***12 | Pin | 2 |
| 15***45 | Blade Group-Multipurpose Bucket | 1 |
152-0232 Bucket Gp-Dirt
| 15***32 | Bucket Group-Dirt | 1 |
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
296-8191 Bucket Gp-General Purpose
| 15***12 | Pin | 2 |
| 15***70 | Clam As-Multipurpose Bucket | 1 |
| 15***47 | Blade Group-Multipurpose Bucket | 1 |
217-6228 Bucket Gp-Grapple
| 15***12 | Pin | 2 |
| 19***08 | Clam As-Multipurpose Bucket | 1 |
| 21***28 | Bucket Group-Grapple | 1 |
156-0886 Bucket Gp-Grapple
| 15***12 | Pin | 2 |
| 15***70 | Clam As-Multipurpose Bucket | 1 |
| 15***86 | Bucket Group-Grapple; -Industrial | 1 |
286-9278 Bucket Gp-Grapple
| 15***12 | Pin | 2 |
| 15***53 | Clam As-Multipurpose Bucket | 1 |
| 28***78 | Bucket Group-Grapple | 1 |
279-5359 Bucket Gp-Grapple -Industrial
| 15***12 | Pin | 2 |
| 27***59 | Bucket Group-Grapple; -Industrial | 1 |
| 29***42 | Blade Group-Multipurpose Bucket | 1 |
286-9244 Bucket Gp-Grapple
| 14***32 | Clam As-Multipurpose Bucket | 1 |
| 15***12 | Pin | 2 |
| 28***44 | Bucket Group-Grapple | 1 |
156-0885 Bucket Gp-Grapple
| 15***12 | Pin | 2 |
| 15***53 | Clam As-Multipurpose Bucket | 1 |
| 15***85 | Bucket Group-Grapple; -Industrial | 1 |
156-0884 Bucket Gp-Grapple
| 14***32 | Clam As-Multipurpose Bucket | 1 |
| 15***12 | Pin | 2 |
| 15***84 | Bucket Group-Grapple; -Industrial | 1 |
325-7037 Bucket Gp-Multipurpose
| 19***42 | Fork Group-Pallet | 2 |
| 26***81 | Carriage Group-Fork | 1 |
| 32***37 | Bucket Group-Multipurpose | 1 |
325-7057 Bucket Gp-Multipurpose
| 32***57 | Bucket Group-Multipurpose | 1 |
| 35***71 | Carriage Group-Fork | 6 |
154-5005 Bucket Gp-Multipurpose
| 15***05 | Bucket Group-Multipurpose | 1 |
| 15***12 | Pin | 2 |
| 15***70 | Clam As-Multipurpose Bucket | 1 |
293-0141 Bucket Gp-Multipurpose
| 19***43 | Fork Group-Pallet | 2 |
| 26***81 | Carriage Group-Fork | 1 |
| 29***41 | Bucket Group-Multipurpose | 1 |
154-5009 Bucket Gp-Multipurpose
| 15***09 | Bucket Group-Multipurpose | 1 |
| 15***12 | Pin | 2 |
| 19***08 | Clam As-Multipurpose Bucket | 1 |
279-5383 Bucket Gp-Multipurpose
| 15***12 | Pin | 2 |
| 15***38 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
| 27***83 | Bucket Group-Multipurpose | 1 |
325-7047 Bucket Gp-Multipurpose
| 19***45 | Fork Group-Pallet | 2 |
| 26***81 | Carriage Group-Fork | 1 |
| 32***47 | Bucket Group-Multipurpose | 1 |
279-5404 Bucket Gp-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***04 | Bucket Group-Multipurpose | 1 |
325-7077 Bucket Gp-Multipurpose
| 19***42 | Fork Group-Pallet | 2 |
| 32***77 | Bucket Group-Multipurpose | 1 |
| 35***71 | Carriage Group-Fork | 1 |
279-5389 Bucket Gp-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***89 | Bucket Group-Multipurpose | 1 |
325-7067 Bucket Gp-Multipurpose
| 19***43 | Fork Group-Pallet | 2 |
| 32***67 | Bucket Group-Multipurpose | 1 |
| 35***71 | Carriage Group-Fork | 1 |
279-5397 Bucket Gp-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***97 | Bucket Group-Multipurpose | 1 |
285-6099 Bucket Gp-Utility
| 15***35 | Plate-Instruction; (Load Capacity) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 25***95 | Step As | 1 |
285-6102 Bucket Gp-Utility
| 26***81 | Carriage Group-Fork | 6 |
| 28***02 | Bucket Group-Utility | 1 |
285-6096 Bucket Gp-Utility
| 19***45 | Fork Group-Pallet | 2 |
| 28***96 | Bucket Group-Utility | 1 |
| 35***71 | Carriage Group-Fork | 1 |
353-1693 Carriage & Fork Ar
| 14***05 | Bearing-Sleeve | 4 |
| 14***37 | Edge | 1 |
| 15***38 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
293-9427 Carriage & Fork Ar
| 15***35 | Plate-Instruction; (Load Capacity) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 25***95 | Step As | 1 |
293-9429 Carriage & Fork Ar
| 14***05 | Bearing-Sleeve | 4 |
| 14***36 | Edge | 1 |
| 15***38 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
353-1694 Carriage & Fork Ar
| 14***05 | Bearing-Sleeve | 4 |
| 15***38 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
| 16***30 | Plate-Identification; (Cat) | 2 |
353-1696 Carriage & Fork Ar
| 14***05 | Bearing-Sleeve | 4 |
| 16***30 | Plate-Identification; (Cat) | 2 |
| 22***32 | Edge | 1 |
293-9428 Carriage & Fork Ar
| 14***05 | Bearing-Sleeve | 4 |
| 14***35 | Edge | 1 |
| 15***38 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
353-1697 Carriage & Fork Ar
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
293-9426 Carriage Gp-Fork
| 25***25 | Lines Group-Coupler | 1 |
| 25***01 | Coupler Group-Quick | 1 |
| 25***90 | Wiring Group-Quick Coupler | 1 |
351-9371 Carriage Gp-Fork
| 13***79 | Washer; (11x32x3-mm Thk) | 2 |
| 13***51 | Spacer; (11x19x6-mm Thk) | 2 |
| 15***97 | Spring | 2 |
261-6681 Carriage Gp-Fork
| 25***00 | Coupler Group-Quick | 1 |
| 26***81 | Carriage Group-Fork | 1 |
| 28***90 | Fitting Group-Hydraulic; -Manual | 1 |
154-5053 Clam As-Multipurpose Bucket
| 15***53 | Clam As-Multipurpose Bucket | 1 |
| 16***28 | Plate | 1 |
| 5C***53 | Bolt (M6x1.00x16mm); (M6x1x16mm Thk) | 5 |
199-8308 Clam As-Multipurpose Bucket
| 19***40 | Cylinder Group-Hydraulic; -Coupler | 1 |
| 19***42 | Pin | 1 |
| 19***08 | Clam As-Multipurpose Bucket | 1 |
293-0148 Clam As-Multipurpose Bucket
| 14***14 | Edge-Cutting | 1 |
| 29***48 | Clam As-Multipurpose Bucket | 1 |
| 3F***08 | Bolt-Plow; (5/8-11x2.25-In) | 10 |
154-5070 Clam As-Multipurpose Bucket
| 15***70 | Clam As-Multipurpose Bucket | 1 |
| 19***40 | Cylinder Group-Hydraulic; -Coupler | 1 |
| 19***42 | Pin | 1 |
149-4232 Clam As-Multipurpose Bucket
| 14***32 | Clam As-Multipurpose Bucket | 1 |
| 20***85 | Pin | 2 |
| 21***62 | Cylinder & Link Group-Coupler; -Lh | 1 |
296-0582 Conversion Gp-Work Tool -Kit, High Flow
| 14***88 | Edge-Cutting | 1 |
| 29***82 | Conversion Group-Work Tool; -Kit, High Flow | 1 |
| 3F***08 | Bolt-Plow; (5/8-11x2.25-In) | 13 |
258-3691 Coupler Ar-Quick
| 13***94 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 8 |
| 25***91 | Coupler Ar-Quick | 1 |
258-2790 Coupler Ar-Quick
| 13***93 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 6 |
| 25***90 | Coupler Ar-Quick | 1 |
258-2500 Coupler Gp-Quick
| 13***95 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 8 |
| 25***00 | Coupler Group-Quick | 1 |
258-2501 Coupler Gp-Quick
| 13***96 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 11 |
| 25***01 | Coupler Group-Quick | 1 |
162-5236 Cover Gp-Lines
| 13***97 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 11 |
| 16***36 | Cover Group-Lines | 1 |
215-3962 Cylinder & Link Gp-Coupler -Lh
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 7 |
| 19***24 | Edge-Cutting | 1 |
| 21***62 | Cylinder & Link Group-Coupler; -Lh | 1 |
215-3963 Cylinder & Link Gp-Coupler -Rh
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 11 |
| 19***24 | Edge-Cutting | 1 |
| 21***63 | Cylinder & Link Group-Coupler; -Rh | 1 |
222-7545 Edge Gp-Bit & Cutting
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 13 |
| 22***45 | Edge Group-Bit & Cutting | 1 |
| 29***02 | Edge-Cutting | 1 |
222-7546 Edge Gp-Bit & Cutting
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***14 | Fork Group-Grapple; -Industrial | 9 |
| 22***46 | Edge Group-Bit & Cutting | 1 |
135-9384 Edge Gp-Cutting
| 13***84 | Edge Group-Cutting | 1 |
| 28***05 | Fork Group-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
135-9387 Edge Gp-Cutting
| 13***87 | Edge Group-Cutting | 1 |
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
296-7680 Edge Gp-Cutting
| 22***29 | Positioner Group-Fork | 1 |
| 29***80 | Edge Group-Cutting | 1 |
135-9386 Edge Gp-Cutting
| 13***86 | Edge Group-Cutting | 1 |
| 16***54 | Tine | 1 |
| 3E***70 | Pin; (Spring) | 1 |
135-9385 Edge Gp-Cutting
| 13***85 | Edge Group-Cutting | 1 |
| 28***10 | Fork Group-Grapple | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
135-9383 Edge Gp-Cutting
| 13***83 | Edge Group-Cutting | 1 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***14 | Fork Group-Grapple; -Industrial | 2 |
149-5741 Edge Gp-Cutting
| 14***41 | Edge Group-Cutting | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 9 |
195-7124 Edge Gp-Cutting
| 19***24 | Edge Group-Cutting | 1 |
| 22***29 | Positioner Group-Fork | 1 |
285-6114 Fork Ar-Grapple -Utility
| 19***42 | Fork Group-Pallet | 12 |
| 22***29 | Positioner Group-Fork | 1 |
| 28***14 | Fork Ar-Grapple; -Utility | 1 |
279-5360 Fork Ar-Grapple -Industrial
| 19***43 | Fork Group-Pallet | 12 |
| 22***29 | Positioner Group-Fork | 1 |
| 27***60 | Fork Ar-Grapple; -Industrial | 1 |
285-6115 Fork Ar-Grapple -Utility
279-5350 Fork Ar-Grapple -Industrial
| 22***29 | Positioner Group-Fork | 1 |
| 27***50 | Fork Ar-Grapple; -Industrial | 1 |
279-5351 Fork Gp-Grapple -Industrial
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 7 |
| 16***38 | Fork Group-Utility | 1 |
164-9614 Fork Gp-Grapple -Industrial
| 16***14 | Fork Group-Grapple; -Industrial | 1 |
| 16***41 | Tine | 1 |
| 9R***59 | Clip | 1 |
285-6110 Fork Gp-Grapple
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 9 |
| 16***39 | Fork Group-Utility | 1 |
243-0003 Fork Gp-Pallet -Kit
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***89 | Tack-Fastener | 4 |
243-0002 Fork Gp-Pallet -Kit
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***89 | Tack-Fastener | 4 |
195-6943 Fork Gp-Pallet
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***45 | Fork As; (Utility) | 1 |
195-6942 Fork Gp-Pallet
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***44 | Fork As; (Utility) | 1 |
243-0001 Fork Gp-Pallet -Kit
| 17***14 | Pin As | 1 |
| 17***55 | Shim; (1-mm Thk) | 1 |
| 17***56 | Shim; (2-mm Thk) | 1 |
195-8545 Fork Gp-Pallet
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 7 |
| 19***45 | Fork Group-Pallet | 1 |
165-8736 Fork Gp-Utility
| 16***31 | Mounting Group-Cylinder; -Utility | 1 |
| 16***36 | Fork Group-Utility | 1 |
| 16***40 | Grapple Group-Utility | 1 |
165-8739 Fork Gp-Utility
| 16***39 | Fork Group-Utility | 1 |
| 19***37 | Plate | 1 |
| 19***45 | Spring | 1 |
285-6105 Fork Gp-Utility
| 03***57 | Washer; (13x26x6-mm Thk) | 2 |
| 17***53 | Plate | 2 |
| 18***97 | Plate Group-Roading; -Lh | 1 |
165-8732 Fork Gp-Utility
| 16***95 | Cylinder Group-Grapple | 1 |
| 16***31 | Mounting Group-Cylinder; -Utility | 1 |
| 16***32 | Fork Group-Utility | 1 |
165-8737 Fork Gp-Utility
| 15***11 | Pin | 4 |
| 15***35 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
| 16***37 | Fork Group-Utility | 1 |
165-8738 Fork Gp-Utility
| 16***38 | Fork Group-Utility | 1 |
| 19***37 | Plate | 1 |
| 19***45 | Spring | 1 |
230-5670 Frame Gp-Blade
| 03***57 | Washer; (13x26x6-mm Thk) | 4 |
| 17***14 | Film-Stripe; (Reflective, Red, White) | 1 |
| 17***15 | Film; (Reflective)(Warning) | 1 |
279-5352 Frame Gp-Fork -Industrial
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 06***51 | Clamp | 4 |
| 10***59 | Spacer; (9x20x39.2-mm Thk) | 1 |
279-5358 Frame Gp-Fork -Industrial
| 06***51 | Clamp | 4 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 4 |
| 10***59 | Spacer; (9x20x39.2-mm Thk) | 1 |
285-6116 Grapple & Cylinder Gp-Utility
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 06***51 | Clamp | 4 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 4 |
165-8740 Grapple Gp-Utility
| 16***40 | Grapple Group-Utility | 1 |
| 19***45 | Spring | 1 |
| 30***68 | Pin-Spring | 1 |
258-2536 Handle & Pin Gp-Coupler -Rh
| 17***47 | Pin | 1 |
| 25***36 | Handle & Pin Group-Coupler; -Rh | 1 |
| 9R***01 | Pin-Cotter | 1 |
258-2538 Handle & Pin Gp-Coupler -Lh
| 16***60 | Pin-Spring | 1 |
| 19***42 | Pin | 1 |
| 25***36 | Handle & Pin Group-Coupler; -Rh | 1 |
319-9480 Kit-Roading Plate & Mounting -Bucket
| 17***14 | Film-Stripe; (Reflective, Red, White) | 1 |
| 17***15 | Film; (Reflective)(Warning) | 1 |
| 17***50 | Plate As; (Lh) | 1 |
177-9152 Kit-Roading Plate & Mounting -Bucket
| 16***60 | Pin-Spring | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 19***42 | Pin | 1 |
258-3645 Kit-Water Tank & Mounting
| 17***41 | Spring | 4 |
| 17***73 | Plate As | 1 |
| 25***45 | Kit-Water Tank & Mounting | 1 |
346-1833 Kit-Water Tank & Mounting
| 18***86 | Step As | 1 |
| 34***33 | Kit-Water Tank & Mounting | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
215-3957 Link Gp-Coupler
| 21***57 | Link Group-Coupler | 1 |
| 2S***08 | Washer-Retaining; (0.531x3.25x0.438-In Thk) | 2 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 1 |
175-4238 Lock Gp-Quick Coupler -Mechanical
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 19***06 | Cap As; (Water Tank) | 1 |
| 19***07 | Fitting-Drain | 1 |
258-2535 Lock Gp-Quick Coupler -Rh
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
| 25***35 | Lock Group-Quick Coupler; -Rh | 1 |
258-2537 Lock Gp-Quick Coupler -Lh
| 25***37 | Lock Group-Quick Coupler; -Lh | 1 |
| 25***27 | Screw-Truss Head; (No 12x17.46-mm) | 4 |
| 25***98 | Holder-Cup | 1 |
184-6097 Plate Gp-Roading -Lh
| 18***97 | Plate Group-Roading; -Lh | 1 |
184-6098 Plate Gp-Roading -Rh
| 18***98 | Plate Group-Roading; -Rh | 1 |
177-1983 Spring Gp-Blade
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 17***83 | Spring Group-Blade | 1 |
| 20***45 | Strap-Cable | 2 |
188-7733 Step Gp-Material Handling Arm
| 18***33 | Step Group-Material Handling Arm | 1 |
| 25***68 | Compressor & Mtg Group-Refrig | 1 |
| 25***46 | Wiring Group-Heater | 1 |
173-7407 Stop Gp-Bucket -Utility
| 10***74 | Seal-Connector | 3 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
116-2001 Strainer Gp-Water
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***01 | Strainer Group-Water | 1 |
| 11***31 | Switch-Temperature; (Air Conditioner) | 1 |
166-2551 Tank Gp-Water
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***51 | Tank Group-Water | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
141-4999 Tooth Gp-Uni
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 14***99 | Tooth Group-Uni | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
262C serial number reference
The PIN plate on a 262C is on the left side of the machine, low at the rear under the left support arm; open or remove the side panel/guard if it is not visible from outside. On C-model machines there is also a public VIN stamping on the left side behind the front tire (moved to the right front of the machine on some later-build units). The plate carries the full PIN string such as CAT0262CMST00001 - the 3-letter block (MST, TMW) is the prefix identifying the build series/configuration, and the digits that follow are the sequential unit number within that prefix.
| Prefix | Identifies | Notes |
|---|---|---|
| MST | 262C (first-generation C-Series) | Base 262C build series, serials run MST00001 and up. Vertical-lift skid steer loader powered by the Cat C3.4 DIT turbocharged diesel, rated around 61 kW (82 hp) net. Seen on machines from roughly 2007 through the early 2010s; treat exact year breakpoints as approximate and confirm with a dealer. |
| TMW | 262C2 (262C Series 2 refresh) | Series 2 refresh of the 262C, serials run TMW00001 and up. Same Cat C3.4 DIT diesel platform as the first-generation MST-prefix machine, though published net power for the Series 2 varies by source; confirm exact rating with a dealer. Appears on machines from roughly 2012 onward; treat exact year breakpoints as approximate and confirm with a dealer. |
Frequently asked questions
What engine does the Caterpillar 262C use?
A Cat C3.4 DIT four-cylinder, turbocharged, direct-injection diesel displacing 3.4 L (207 cu in). Rated net power is about 82 hp (61 kW) at 2,500 rpm, with gross power up to 84 hp (63 kW). This engine carried through the 2012 Series 2 update to meet Tier 4 Interim emissions.
What is the operating weight of the Caterpillar 262C?
Around 3,615 kg (7,970 lb) in base wheeled configuration. Actual weight varies with tire type, cab, counterweight, and attachments, so treat this as a baseline rather than an exact figure for every unit.
What replaced the Caterpillar 262C?
The Cat 262D succeeded it, moving to a C3.3B engine and full Tier 4 Final aftertreatment. The 262C itself had replaced the earlier 262B.
What 262C owners discuss
What do owners report about the Cat 262C hydrostatic drive and top travel speed?
Standard single-speed units top out around 12 km/h (7.7 mph); the two-speed option pushes that to roughly 19 km/h (12 mph). Complaints of a "slow" 262C usually trace to one of two things: an under-speed control feature that intentionally derates the hydrostatic pumps to hold engine rpm under heavy load (this is normal behavior, not a fault), or worn joystick linkage/electrical connections and a failing two-speed solenoid that leave the machine stuck in low range or hunting between speeds. Confirm actual ground speed with a GPS reading before chasing a speed complaint, since felt speed under load is easy to misjudge.
What engine does the 262C run, and what quirks come with it?
The 262C uses the Cat C3.4 DIT, a 4-cylinder turbocharged direct-injection diesel rated around 61 kW net / 63 kW gross (82-84 hp) at 2500 rpm, meeting Tier 4 Interim / Stage IIIA emissions. Community discussion does not flag it with the diesel-particulate-filter regen complaints seen on the later D-series machines. Instead, driveability problems on the 262C usually come back to fuel delivery: a missing O-ring at the fuel filter/water-separator bowl, a fuel cap not venting properly, a restricted charge-pump filter, or water worked into the injection pump. All of these present as gradual power loss or stalling under load and get mistaken for engine trouble.
Why does a 262C crank and start but have no hydraulics?
Recurring diagnosis on this model: hydraulics run through a lockout circuit fed by several safety interlocks - the operator-presence (seat) switch, seat bar/belt sensor, park brake switch, and the cab door harness. A break or corrosion anywhere in that chain disables hydraulics by design, not as a malfunction. Owners most often find a corroded door-harness connector, a seat switch not grounding properly, or a park-brake switch out of adjustment. Have your dealer verify the interlock circuit and each safety switch rather than permanently bypassing them.
What wear patterns show up on the 262C's drive system?
The 262C drives through chain cases with heavy-series roller chain rather than a track undercarriage, so wear shows up as chain stretch and output-seal condition instead of track wear. Chain play should sit around 13 mm (1/2 in); elongation beyond a few percent calls for replacement, and overtightening is a commonly cited cause of premature wear. Running over-the-tire tracks under load is repeatedly flagged as hard on the drive chains, since a locked rear wheel under a loaded bucket adds strain through the chain case. Separately, the output/outdrive seals are called out as a known weak point that lets water in if the machine is pressure-washed aggressively or driven through deep water.
What electrical/sensor faults come up on the 262C's EH joystick controls?
Electro-hydraulic joystick position sensors are a recurring fault source, most often on the left/right position channels. These are PWM output sensors running near 500 Hz, with duty cycle sweeping across the stick's travel; a lost power supply, open circuit, bad connector, or sensor failure throws an above- or below-normal voltage code. Wiring and connector checks resolve most cases. If the harness and sensor test good, the fix is a dealer-level controller recalibration, sometimes preceded by a full ECM reflash before recalibration will hold. Have your dealer verify any joystick sensor fault and recalibration before returning the machine to work, since a miscalibrated axis can move a function unexpectedly.
Why does the bucket slowly uncurl or lose position on some 262C units?
Some owners report the bucket curl function creeping down on its own instead of holding its raised position, occasionally with a change in engine tone when it happens. This points to internal leakage past a cylinder seal or a valve section not holding load, not a control input problem. A bucket or lift arm that drifts down is a crush hazard for anyone working near or under the machine - have your dealer verify cylinder and valve condition before relying on the machine to hold a raised load.
What should a buyer check on a used 262C before purchase?
Start with the hour meter and any service records, and match the serial number against dealer history where possible. Start the engine cold and listen for knocking, hissing, or heavy smoke beyond a brief cold-start puff, which points to turbo or cylinder wear. Cycle every hydraulic function including two-speed and self-level/ride-control if equipped, and watch a raised bucket and arms for drift. Check drive chain tension and listen for chain noise, inspect loader arm pins and bushings for play, and flex the pilot/joystick handles for looseness. Check the flat-face hydraulic couplers for wear, and confirm the cab door and seat interlock switches actually cut hydraulics when triggered - a bypassed interlock is a red flag on a used machine.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 262C part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.