Caterpillarskid steer loader
Caterpillar 256C
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 256C is a radial-lift, wheeled skid steer loader in Caterpillar's C-Series compact loader lineup, built for general construction, landscaping, and material handling work. It runs a Cat 3044C DIT four-cylinder turbocharged diesel (also badged Cat C3.4 DIT on later parts documentation), 3.3 L (201 cu in) displacement, rated around 82 hp (61 kW) net and up to roughly 85 hp gross, meeting Tier 2 emissions (Stage IIIA on EU-spec machines). Operating weight runs about 3,430-3,480 kg (7,566-7,665 lb) depending on tire and hydraulic configuration, with a rated operating capacity near 1,065 kg (2,350 lb) and a tipping load near 2,130 kg (4,700 lb). Cat introduced the 256C in 2007 as part of the C-Series update and kept it in the lineup into the early 2010s before moving to the D-Series. Buyers could spec a standard 84 L/min (22 gpm) hydraulic system or step up to a High Flow XPS package at 125 L/min (33 gpm), choose a one- or two-speed hydrostatic drive, and order a sealed, pressurized cab with seat-mounted joystick controls and an available air-ride seat.
The 3044C DIT and C3.4 DIT badges on the 256C's engine describe the same North America-spec (Tier 2) and EU-spec (Stage IIIA) versions of one engine platform, not a generational change, so service procedures and overhaul parts track closely across both badges. Caterpillar never built a 256B - the 256C was a C-Series-only model number that filled a capacity slot between the smaller 252-class and larger 257/262-class machines. When Cat retired the C-Series for D-Series compact loaders, no single model carried the 256 number forward, so today's closest current-production equivalents are the 246D and 262D bracketing its capacity class. Because the 256C shares its chain-drive axles, engine platform, and hydraulic architecture with siblings like the 246C and 262C, parts interchange runs broad across the family, keeping used units and remanufactured components easy to source in the parts market even though the model itself is long out of production.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 256C specifications
Engine
| Engine model | Cat 3044C DIT (North America, Tier 2 emissions badge); same 3.3 L block sold as Cat C3.4 T on EU/export-spec machines (Stage IIIA badge). Bore 94 mm, stroke 120 mm on both. |
| Gross power | 63 kW / 85 hp (SAE J1995) on the Tier 2 sheet; 62 kW / 84 hp on the Stage IIIA sheet |
| Net power | 61 kW / 82 hp at 2500 rpm (SAE J1349, Tier 2 sheet); 61 kW / 83 hp at 2600 rpm (ISO 9249, Stage IIIA sheet) |
| Displacement | 3.3 L (201 cu in) |
| Cylinders | 4-cylinder, turbocharged direct-injection diesel (DIT) |
| Emissions tier | Tier 2 compliant (North America); Stage IIIA compliant (EU) |
Weights
| Operating weight | 3432 kg (7566 lb), standard configuration |
| Weight with counterweight option | Optional rear counterweight adds 90 kg (200 lb) and raises rated operating capacity; full operating weight with counterweight installed not separately published |
| Shipping weight | Not published separately from operating weight for this model |
| Ground pressure | Not published; the 256C is a wheeled (tire-mounted) skid steer, so ground pressure is not a figure Cat lists for it |
Dimensions
| Wheelbase | 1240 mm (48.8 in) |
| Length without bucket | 2951-3124 mm (116.2-123 in), varies by spec sheet/coupler configuration |
| Length with bucket on ground | 3692 mm (145.4 in) |
| Width over tires | 1676 mm (66 in) |
| Height to top of cab | 2083 mm (82 in) |
| Max overall height (arms raised) | 3998 mm (157.4 in) |
| Ground clearance | 225 mm (8.8 in) |
| Turning radius, from center to machine rear | 1466 mm (57.7 in) |
| Turning radius, from center to bucket | 2433 mm (95.8 in) |
| Departure angle | 26 degrees |
| Maximum dump angle | 40 degrees |
| Bumper overhang behind rear axle | 1089 mm (42.9 in) |
Performance
| Travel speed, one-speed drive | 12.5-13 km/h (7.7 mph) |
| Travel speed, two-speed option | 19-19.3 km/h (11.9 mph) |
| Rated operating capacity (50% of tipping load) | 1066 kg (2350 lb); 1151 kg (2538 lb) with optional counterweight |
| Tipping load | 2108-2132 kg (4700 lb), figure varies slightly by rating standard between spec sheets |
| Breakout force, tilt cylinder | 3324 kg / 7328 lb (33 kN) |
| Bucket pin height at max lift | 3122 mm (122.9 in) |
| Reach at max lift and dump | 600 mm (23.6 in) |
| Clearance at max lift and dump | 2425 mm (95.5 in) |
| Max reach, arms parallel to ground | 1388 mm (54.6 in) |
| Hydraulic flow, standard | 84 L/min (22 gal/min) at 230 bar / 23 000 kPa (3335 psi); 31.9-32 kW (42.8-43 hp) hydraulic power |
| Hydraulic flow, High Flow XPS option | 125 L/min (33 gal/min) at 280 bar / 28 000 kPa (4061 psi) |
| Gradeability | Not published for this model |
Service capacities (summary)
| Fuel tank | 98 L (26 gal) |
| Hydraulic system, total | 57 L (15 gal); hydraulic tank alone holds 42 L (11 gal) |
| Engine oil (crankcase, with filter) | 10 L (2.6 gal) |
| Cooling system | 14 L (3.7 gal) |
| Chain case, each side | 10 L (2.6 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
256C fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) - Cat C3.4 DIT turbocharged diesel | 10.0 L (2.6 US gal / 10.5 qt) | Cat DEO (Diesel Engine Oil). SAE 15W-40 above -9C (15F); SAE 10W-30 below -9C (15F). Meets Cat ECF-3 (API CI-4 or CJ-4 acceptable). |
| Cooling system | 14.0 L (3.7 US gal / 14.8 qt) | Cat ELC (Extended Life Coolant), premixed glycol-based formula. Extended-life service intervals; supplemental additives not required. For extreme cold, ELC Concentrate mix extends protection to about -37C (-34F). |
| Fuel tank | 98.0 L (25.9 US gal) | No. 2-D diesel fuel for normal operation; No. 1-D diesel recommended in cold weather for improved cold-start and flow characteristics. |
| Hydraulic tank (reservoir) | 42.0 L (11.1 US gal) | Cat TDTO or Cat HYDO, SAE 10W, meeting Cat TO-4 specification. Shared reservoir feeds both hydraulic implement circuit and hydrostatic transmission. |
| Hydraulic system, total (incl. tank, lines, cylinders, motors, hydrostatic transmission) | 57.0 L (15.1 US gal) | Cat TDTO or Cat HYDO, SAE 10W, meeting Cat TO-4 specification. Same fluid services the hydrostatic drive motors since the 256C has no separate transmission sump. |
| Chaincase (drive chain compartments, both sides) | 10.0 L (2.6 US gal / 10.5 qt) | Cat TDTO or Cat HYDO meeting Cat TO-4 specification, SAE 30 for normal/warm ambient range; lighter TO-4 viscosity grade (SAE 10W) called for in cold climates per the standard Cat viscosity-by-temperature guidance. |
| Grease (chassis, pins, bushings, lift-arm and tilt-cylinder points) | Spec only - no reservoir capacity | Cat Advanced 3Moly Grease (NLGI 2) for heavily loaded pin joints and high-impact points; general-purpose Cat multipurpose grease acceptable for lighter-duty grease points. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 256C maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
| Every 6,000 h |
|
Servicing the 256C beyond the schedule
Predictive Maintenance & Fluid Analysis
Run scheduled fluid sampling on the C3.4 DIT engine oil, hydraulic oil, and drive chaincase oil to catch turbocharger wear, chain stretch, or hydrostatic pump contamination before failure. Watch hydraulic oil temperature and case-drain flow on the piston pump/motor set, especially on High Flow XPS-equipped units running demanding attachments. Track chaincase oil condition closely, since metal-in-oil readings there flag chain and sprocket wear long before it shows up as drive symptoms on either axle.
Corrective & Common Repairs
Common 256C issues center on the chain-drive axles (chain stretch, sprocket wear) and hydrostatic drive components after heavy loading and repeated cold starts. Electronic torque management and joystick control circuits can throw fault codes tied to wiring or sensor connections routed near the rear door. The rear door opens 90 degrees and the cab tilts back for direct access to the C3.4 engine, hydraulic pumps, valves, and tank, simplifying diagnosis of boost leaks, fuel filter clogging, or hydraulic relief valve drift.
Overhaul & Rebuild Points
At higher hours, plan on rebuilding the hydrostatic drive pump and motor as seals and pistons wear, along with replacing stretched drive chains and worn sprockets in both chaincases. C3.4 DIT engine overhauls typically address turbocharger bearing wear, injector performance, and head gasket condition. Lift arm and tilt cylinder pivot pins and bushings wear from radial-lift loading cycles and should be checked for play during any major undercarriage or loader-arm rebuild.
Seasonal & Environment Servicing
Before cold-weather work, switch to a winter-grade engine oil viscosity and confirm coolant protection for the C3.4 DIT engine, since chain-drive skid steers see extra strain from cold, thickened chaincase oil. In hot or dusty conditions, clean the engine air filter and radiator/oil cooler fins often to protect the turbocharged engine from heat soak. Wet or muddy sites accelerate chain and sprocket wear in the drive chaincases, so shorten inspection intervals when running the 256C in abrasive or saturated ground.
256C common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 110-6326 | Filter Element As-Air | Air intake service | Check fitment → |
| 110-6331 | Filter Element As-Air | Air intake service | Check fitment → |
| 265-6618 | Filter Element-Cab Air | Air intake service | Check fitment → |
| 265-6619 | Filter Element-Cab Air | Air intake service | Check fitment → |
| 1G-8878 | Filter As-Oil | Hydraulic service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
256C fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 2685-8 | Drive motor speed sensor circuit - unexpected motor speed detection control disabled | Erratic or lost signal from a drive motor speed sensor; sensor tip fouled with debris, worn nose, damaged wiring or loose connector between the sensor and machine ECM | Inspect and clean the sensor tip and mounting bore, check harness continuity and connector pins back to the ECM, replace the speed sensor if wiring tests good |
| 2204-3 | Auxiliary/loader control lever position sensor - signal voltage above normal | Open power or return circuit to the thumb-roller/auxiliary lever sensor, signal wire shorted to sensor supply, or sensor disconnected | Check and clean the lever sensor connector, verify supply and signal voltages at the sensor, recalibrate the joystick after repair |
| 70-3 | Parking brake switch - both switch inputs reading open circuit at the same time | Broken wire, corroded connector, or failed park brake switch preventing the ECM from reading a valid grounded/open switch state | Check park brake switch wiring and connector for continuity and corrosion, test switch operation with a multimeter, replace switch if it fails to change state |
| E568 | Left drive motor speed sensor #1 - erratic, intermittent or incorrect signal (logged event) | Same root causes as the related speed sensor diagnostic code: fouled or worn sensor tip, damaged sensor wiring, or loose connector | Inspect the left drive motor speed sensor and connector, check wiring for chafing near the motor, replace the sensor if signal remains erratic after cleaning |
| E569-2 | Unexpected left motor reverse speed detected (logged/active event) | Drive motor speed sensor fault or miswired/crossed sensor signal causing the ECM to see rotation opposite the commanded direction, can trigger reduced travel speed or limp mode | Pull active and logged diagnostic codes together with this event, verify left speed sensor wiring and orientation, inspect the left drive motor before condemning the ECM |
| 110-3 / 110-4 | Engine coolant temperature sensor - signal voltage above normal (110-3) or below normal (110-4) | Open or shorted sensor circuit, corroded connector, or a failed coolant temperature sensor; not the same as an actual overheat event | Check coolant level and sensor connector first, verify sensor resistance/voltage against spec, replace sensor if wiring checks out good |
| 41-3 / 41-4 | 8 volt DC sensor supply - voltage above normal (41-3) or below normal (41-4) | Shorted sensor supply wire (to power or ground) somewhere in the sensor network fed by this reference voltage, or an ECM regulator fault | Disconnect sensors fed by the 8V supply one at a time to isolate the shorted circuit, check supply voltage directly at the ECM connector before replacing the ECM |
| 168-3 | Battery/system voltage - voltage above normal | Charging system overcharging: faulty voltage regulator in the alternator, bad battery, or loose/corroded charging circuit connections | Test battery condition and charging voltage at the battery with engine running, inspect alternator output and wiring, repair charging circuit before clearing the code |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
256C attachments & work tools
Buckets
General purpose, dirt/multi-purpose, utility, light-material, and grapple buckets are offered for this class. Standard capacity runs about 0.38 m3 (0.5 cu yd), sized to the machine's 1065 kg (2350 lb) rated operating capacity.
Pallet forks / material handling
Fork carriage frames and material-handling arms mount to the standard quick coupler for pipe, precast, and palletized loads. Capacity is matched to the machine's rated operating load class, not a fixed tine size.
Augers
Auger drive units with interchangeable bits are offered for post-hole and footing work in this size class. They run off the auxiliary hydraulic circuit and are best suited to standard-flow output.
Grapples
Root, rock, and utility grapples are offered either as bolt-on bucket attachments or standalone grapple tools. They mount through the same quick coupler as buckets and forks.
Blades
Angle blades and dozer-style blades are offered for grading and site cleanup. Blade angling is hydraulically actuated off the auxiliary circuit.
Brooms
Utility (pickup) brooms sweep and collect light debris from smooth surfaces in forward or reverse travel. They run on standard auxiliary flow.
Cold planers
Compact cold planers are offered for small residential and commercial paving repair jobs. This tool class is flow-hungry and is best matched to the optional high-flow hydraulic package.
Mulchers
Mulcher heads for cutting and mulching brush and undergrowth are offered for this machine class. They require the high-flow auxiliary hydraulic option to perform effectively.
Other ground-engaging and turf tools
Trenchers, stump grinders, wheel saws, vibratory compactors, landscape rakes/tillers, and snow blowers round out the work-tool lineup offered for this size class, with hydraulic demand varying by tool from standard to high flow.
Quick coupler system
Standard tool mounting uses a manually engaged quick coupler operated by two high-leverage handles at the front of the lift arms. An optional hydraulic (power) quick coupler lets the operator change tools without leaving the cab.
Auxiliary hydraulics
Standard auxiliary flow is rated at about 84 L/min (22 gpm); an optional high-flow circuit steps this up to roughly 125 L/min (33 gpm) for flow-demanding tools such as cold planers and mulchers. System relief is set around 23 MPa (3335 psi), with flat-face quick disconnects and reinforced hose standard.
Factory configuration options
Documented factory options include a counterweight that adds about 90 kg (200 lb) to rated operating capacity, a rotating beacon, an engine block heater (120V or 240V), cold-weather hydraulic oil, and custom paint.
Cab and operator guarding
The operator station is offered as an open ROPS/FOPS-certified station or as an enclosed cab with heat, or enclosed with heat and air conditioning. The enclosed cab is sealed and pressurized to keep dust out; door and window guarding follow from the cab package selected rather than a separate factory accessory line for this model.
All 256C assemblies by section
Every catalogued assembly group for the Caterpillar 256C. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
258-3320 Air Cleaner Gp
| 15***98 | Band-Mounting | 1 |
| 23***25 | Indicator | 1 |
| 25***20 | Air Cleaner Group | 2 |
258-3453 Air Cleaner Gp
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 2 |
| 13***43 | Clamp-Hose | 1 |
| 25***11 | Plate | 1 |
280-8294 Air Cleaner Gp
| 28***94 | Air Cleaner Group | 1 |
| 28***55 | Guard As-Exhaust; (Turbocharger) | 1 |
| 28***91 | Flange, Guard-Exhaust; (Manifold) | 1 |
280-8393 Guard Gp-Debris -Turbocharger, Exhaust Manifold
| 27***52 | Guard-Exhaust; (Manifold) | 1 |
| 28***55 | Guard As-Exhaust; (Turbocharger) | 1 |
| 28***93 | Guard Group-Debris; -Turbocharger, Exhaust Manifold | 1 |
280-8392 Kit-Debris Guard -Turbocharger, Exhaust Manifold
| 28***92 | Kit-Debris Guard; -Turbocharger, Exhaust Manifold | 1 |
| 5I***78 | Gasket | 1 |
| 5I***21 | Elbow Assem. | 1 |
272-3062 Kit-Debris Guard -Turbocharger, Exhaust Manifold
| 27***62 | Kit-Debris Guard; -Turbocharger, Exhaust Manifold | 1 |
| 28***55 | Guard As-Exhaust; (Turbocharger) | 1 |
| 28***91 | Flange, Guard-Exhaust; (Manifold) | 1 |
258-2465 Lines Gp-Air
| 09***00 | Washer; (1.5mm Thk) | 2 |
| 25***12 | Clip | 1 |
| 25***65 | Lines Group-Air | 1 |
247-6317 Lines Gp-Air
| 24***17 | Lines Group-Air | 1 |
| 25***64 | Hose As | 1 |
| 5P***68 | Clamp-Hose; (Us Sourced) | 1 |
316-0471 Lines Gp-Air
| 19***60 | Nut; (M8x1.25-Thd) | 8 |
| 23***60 | Bolt | 8 |
| 23***24 | Gasket-Manifold | 1 |
315-7769 Lines Gp-Air
| 19***22 | Bolt As; (M8x1.25x22-mm) | 4 |
| 27***82 | Clip | 2 |
| 31***40 | Elbow | 1 |
287-5323 Manifold Gp-Exhaust
| 09***49 | Bolt; (M8x1.25x40-mm) | 12 |
| 23***05 | Manifold-Inlet | 1 |
| 23***06 | Gasket; (Inlet Manifold) | 1 |
335-5750 Manifold Gp-Inlet
| 19***76 | Washer-Hard; (8.8x20x8-mm Thk) | 3 |
| 23***21 | Nut; (M10x1.25-Thd) | 1 |
| 25***19 | Muffler As | 1 |
287-4832 Manifold Gp-Inlet
| 09***49 | Bolt; (M8x1.25x40-mm) | 11 |
| 23***05 | Manifold-Inlet | 1 |
| 23***06 | Gasket; (Inlet Manifold) | 1 |
280-8347 Muffler & Mounting Gp
| 09***00 | Washer; (1.5mm Thk) | 3 |
| 19***06 | Gasket | 4 |
| 23***18 | Gasket | 1 |
258-2462 Muffler & Mounting Gp
| 19***76 | Washer-Hard; (8.8x20x8-mm Thk) | 3 |
| 23***21 | Nut; (M10x1.25-Thd) | 1 |
| 25***62 | Muffler & Mounting Group | 1 |
235-5894 Turbocharger Gp
| 09***00 | Washer; (1.5mm Thk) | 3 |
| 19***06 | Gasket | 4 |
| 23***18 | Gasket | 1 |
315-7768 Turbocharger Gp
| 13***87 | Clip | 1 |
| 19***36 | Insert-Threaded; (M6x1-Thd) | 3 |
| 23***96 | Screw-Flat Head; (M6x1x35-mm) | 4 |
Basic Engine
323-2009 Accessory Gp-Engine
| 32***09 | Accessory Group-Engine | 1 |
| 34***61 | Kit-Gasket | 1 |
292-4041 Bearing Gp-Main
| 10***88 | Plate-Thrust; (Standard) | 3 |
| 10***89 | Plate-Thrust; (0.15-mm Os) | 0 |
| 10***90 | Plate-Thrust; (0.35-mm Os) | 0 |
314-9835 Camshaft Gp
| 09***28 | Key | 1 |
| 10***72 | Tappet | 8 |
| 10***73 | Rod-Push | 8 |
233-5473 Camshaft Gp
| 09***28 | Key | 1 |
| 10***72 | Tappet | 8 |
| 10***73 | Rod-Push | 8 |
287-4033 Connecting Rod Gp
| 10***80 | Rod As-Connecting | 4 |
| 12***55 | Bolt-Connecting Rod | 2 |
| 12***56 | Nut | 2 |
233-5480 Cover Gp-Valve Mechanism
| 23***80 | Cover Group-Valve Mechanism | 1 |
| 23***83 | Gasket; (Valve Cover) | 1 |
| 31***98 | Cap-Oil Filler; (Engine) | 1 |
315-7762 Cover Gp-Valve Mechanism
| 09***49 | Bolt; (M8x1.25x40-mm) | 5 |
| 23***83 | Gasket; (Valve Cover) | 1 |
| 31***98 | Cap-Oil Filler; (Engine) | 1 |
314-9860 Crankshaft Gp
| 08***13 | Pin | 2 |
| 09***28 | Key | 2 |
| 13***96 | Nut | 1 |
287-4649 Crankshaft Gp
| 08***13 | Pin | 2 |
| 09***28 | Key | 2 |
| 13***96 | Nut | 1 |
287-2416 Cylinder Block Gp
| 09***41 | Cap | 4 |
| 09***20 | Pin | 2 |
| 10***62 | Bushing | 1 |
315-8330 Cylinder Block Gp
| 09***41 | Cap | 10 |
| 09***20 | Pin | 2 |
| 10***76 | Bolt-Bearing Cap | 10 |
233-5500 Cylinder Head Gp
| 21***75 | Cap | 7 |
| 23***53 | Cylinder Head | 1 |
| 23***54 | Bolt; (M12x1.75x115-mm) | 17 |
315-7760 Cylinder Head Gp
| 10***46 | Bolt-Cylinder Head | 17 |
| 29***45 | Gasket-Head | 1 |
| 31***60 | Cylinder Head Group | 1 |
258-2452 Drain Gp-Engine Oil
| 11***70 | Cap | 1 |
| 1P***78 | Clamp; (Hose) | 1 |
| 21***19 | Adapter | 1 |
235-5890 Flywheel Gp
| 03***39 | Gear-Starter; (112-Teeth) | 1 |
| 22***93 | Bolt; (M12x1.25x30-mm) | 4 |
| 23***91 | Flywheel As | 1 |
314-9861 Flywheel Gp
| 03***39 | Gear-Starter; (112-Teeth) | 1 |
| 22***93 | Bolt; (M12x1.25x30-mm) | 6 |
| 23***91 | Flywheel As | 1 |
315-7766 Gear Gp-Front
| 11***27 | Gear; (46-Teeth) | 1 |
| 11***29 | Gear; (23-Teeth) | 1 |
| 11***85 | Gear-Pump; (Oil, 31-Teeth) | 1 |
287-4830 Gear Gp-Front
| 11***27 | Gear; (46-Teeth) | 1 |
| 11***29 | Gear; (23-Teeth) | 1 |
| 11***83 | Gear As-Idler; (49-Teeth) | 1 |
280-8407 Guard Gp-Belt
| 09***15 | Lockwasher | 2 |
| 10***80 | Gasket-Rear | 1 |
| 11***15 | Seal As-Oil | 1 |
258-2469 Guard Gp-Belt
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 4 |
| 13***22 | Bolt-Locking; (M8x1.25x16-mm) | 2 |
| 25***43 | Guard-Belt | 1 |
287-3357 Housing Gp-Flywheel
| 10***80 | Gasket-Rear | 1 |
| 11***15 | Seal As-Oil | 1 |
| 14***17 | Bolt; (M10x1.25x25-mm) | 10 |
315-7764 Housing Gp-Flywheel
| 09***29 | Seal-O-Ring (Id=139.5mm); (Id=139.50mm) | 1 |
| 10***77 | Gasket-Front Plate | 1 |
| 11***47 | Gasket; (Gear Case) | 1 |
315-8336 Housing Gp-Front
| 19***05 | Bolt As | 4 |
| 23***66 | Eye | 1 |
| 23***68 | Gasket; (Rear Head) | 1 |
287-3074 Housing Gp-Front
| 09***00 | Washer; (1.5mm Thk) | 2 |
| 09***29 | Seal-O-Ring (Id=139.5mm); (Id=139.50mm) | 1 |
| 19***12 | Bolt; (M6x1x18-mm) | 4 |
315-7761 Lifting Gp-Engine
| 11***90 | Mount As | 2 |
| 12***80 | Locknut; (M12x1.75-Thd) | 1 |
| 14***88 | Mount-Engine | 2 |
287-1844 Lifting Gp-Engine
| 23***66 | Eye | 1 |
| 23***68 | Gasket; (Rear Head) | 1 |
| 28***44 | Lifting Group-Engine | 1 |
258-2447 Mounting Gp-Engine
| 16***01 | Sealant-Silicone | 0 |
| 19***03 | Bolt As | 1 |
| 23***11 | Washer | 1 |
287-3921 Pan Gp-Oil
| 09***82 | Gasket, Oil Drain | 1 |
| 13***32 | Plug; (Drain, Engine Oil) | 1 |
| 16***01 | Sealant-Silicone | 1 |
315-7765 Pan Gp-Oil
| 09***82 | Gasket, Oil Drain | 1 |
| 13***32 | Plug; (Drain, Engine Oil) | 1 |
| 16***01 | Sealant-Silicone | 1 |
335-5772 Pan Gp-Oil
| 22***04 | Set-Piston Ring; (Standard) | 4 |
| 23***14 | Piston; (Standard) | 4 |
| 23***15 | Pin-Piston | 4 |
314-9855 Piston Gp
| 31***55 | Piston Group | 1 |
| 5I***05 | Plug | 6 |
235-5889 Piston Gp
| 23***15 | Pin-Piston | 4 |
| 23***89 | Piston Group | 1 |
| 25***38 | Ring-Snap | 8 |
287-2983 Plug Gp-Engine
| 28***83 | Plug Group-Engine; -Cylinder Block, Rh | 1 |
| 28***48 | Pulley-Crankshaft | 1 |
287-2922 Plug Gp-Engine
| 19***11 | Plug | 1 |
| 28***22 | Plug Group-Engine; -Cylinder Block, Lh | 1 |
301-3396 Pulley Gp-Crankshaft
| 23***07 | Pulley | 1 |
| 30***96 | Pulley Group-Crankshaft | 1 |
| 8T***42 | Bolt; (M8x1.25x14-mm) | 4 |
287-4749 Pulley Gp-Crankshaft
| 28***49 | Pulley Group-Crankshaft | 1 |
| 30***97 | Pulley-Crankshaft; (2-Groove) | 1 |
287-6114 Pulley Gp-Water Pump
| 28***14 | Pulley Group-Water Pump | 1 |
| 35***69 | V-Belt; (Water Pump) | 1 |
287-6138 V-Belt Gp
| 09***05 | Cap | 1 |
| 19***24 | Ring-Snap | 2 |
| 22***45 | Rocker As | 8 |
235-5880 Valve Mechanism Gp
| 11***68 | Clip | 2 |
| 15***28 | Clamp | 1 |
| 19***22 | Bolt As; (M8x1.25x22-mm) | 2 |
Cooling System
314-9900 Cooler Gp-Engine Oil
| 09***13 | Seal-O-Ring | 4 |
| 09***21 | Plug | 2 |
| 23***98 | Stud | 1 |
235-5896 Cooler Gp-Engine Oil
| 09***13 | Seal-O-Ring | 4 |
| 09***21 | Plug | 2 |
| 19***35 | Bolt; (M8x1.25x22-mm) | 13 |
315-7763 Drain Gp-Coolant
| 09***75 | Bolt; (25-mm Long) | 2 |
| 23***09 | Washer-Special | 1 |
| 23***31 | Cover | 1 |
292-4040 Drain Gp-Coolant
| 23***78 | Valve As-Drain | 1 |
| 29***40 | Drain Group-Coolant | 1 |
| 32***33 | Adapter | 1 |
315-8355 Housing & Regulator Gp
| 09***75 | Bolt; (25-mm Long) | 2 |
| 23***31 | Cover | 1 |
| 23***59 | Gasket; (Water Temperature Regulator) | 1 |
235-5900 Lines Gp-Water
| 16***15 | Cap-Vented; (Coolant Recovery Tank) | 1 |
| 1P***78 | Clamp; (Hose) | 2 |
| 22***78 | Clamp-Tbolt; (M5x0.8) | 4 |
258-3552 Lines Gp-Water -Radiator
| 14***32 | Pin As | 1 |
| 17***55 | Pin | 2 |
| 20***76 | Stud-Ball | 4 |
258-3542 Mounting Gp-Rad & Oil Cooler
| 14***32 | Pin As | 1 |
| 17***55 | Pin | 2 |
| 20***76 | Stud-Ball | 4 |
287-6056 Pump Gp-Water
| 28***66 | Bolt; (M8x1.25x65-mm) | 1 |
| 28***56 | Pump Group-Water | 1 |
| 31***89 | Adapter | 1 |
315-7770 Pump Gp-Water
| 10***47 | Cover-Pump | 1 |
| 19***60 | Plug | 1 |
| 31***70 | Pump Group-Water | 1 |
335-9117 Pump Gp-Water
| 03***65 | Cap As-Radiator; (Sea Water Heat Exchanger) | 1 |
| 06***80 | Fitting | 1 |
| 12***52 | Spacer; (10.5x20x28-mm Thk) | 1 |
258-3459 Radiator & Hyd Oil Cooler Gp
| 11***26 | Filter Element As-Air; (Primary) | 1 |
| 11***31 | Filter Element As-Air; (Secondary) | 1 |
| 11***17 | Valve-Dust; (Air Cleaner) | 1 |
Electrical And Starting System
315-8353 Alternator Gp-Charging
| 03***05 | Terminal-Cable; (00-Ga, 5/16-In Screw) | 1 |
| 11***16 | Block | 1 |
| 1P***10 | Tape (Order By The Meter) (Use As | 0 |
287-6361 Alternator Gp-Charging
| 23***62 | Plate | 1 |
| 23***73 | Bolt; (M10x1.5x90-mm) | 1 |
| 23***72 | Alternator Group-Charging | 1 |
105-2814 Alternator Gp-Charging
| 10***14 | Alternator Group-Charging | 2 |
| 23***62 | Plate | 1 |
| 23***73 | Bolt; (M10x1.5x90-mm) | 1 |
258-4121 Battery & Wiring Gp
| 11***71 | Puller-Minifuse | 1 |
| 25***27 | Screw-Truss Head; (No 12x17.46-mm) | 2 |
| 25***21 | Battery & Wiring Group | 1 |
310-5289 Control Gp-Machine
| 10***59 | Glow Plug | 4 |
| 25***90 | Plate-Connection | 1 |
| 31***89 | Control Group-Machine | 1 |
258-4144 Cover Gp-Fuse Panel
| 22***41 | Element As-Jacket Water Heater; (120-Volt, 530-Watt) | 1 |
| 22***42 | Heater Group-Jacket Water | 1 |
| 23***03 | Gasket | 1 |
258-4103 Electronics Gp-Machine
| 13***17 | Cap As-Dust | 1 |
| 21***12 | Cord As | 1 |
| 22***35 | Element As-Jacket Water Heater; (240-Volt, 530-Watt) | 1 |
347-4187 Electronics Gp-Monitor
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***17 | Tape; (5.5m) | 0 |
347-4186 Electronics Gp-Monitor -Monitor
| 15***28 | Spacer; (7x16x20-mm Thk) | 4 |
| 25***27 | Screw-Truss Head; (No 12x17.46-mm) | 9 |
| 25***48 | Plate As | 1 |
235-5904 Glow Plug Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***17 | Tape; (5.5m) | 0 |
218-0943 Heater Gp-Jacket Water
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***39 | Relay As | 3 |
218-0942 Heater Gp-Jacket Water
| 15***71 | Kit-Connecting Plug; (4-Pin) | 0 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 2 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
258-4145 Kit-Control Mounting -Product Link
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 20***14 | Lens As; (Floodlight) | 1 |
| 23***30 | Body As; (Floodlight) | 1 |
258-4185 Kit-Security
| 10***53 | Case, Spacer; (Spherical) | 1 |
| 10***54 | Spacer; (Spherical) | 1 |
| 10***55 | Washer; (Spherical) | 1 |
328-2366 Kit-Wiring Harness -Accugrade
| 32***66 | Kit-Wiring Harness; -Accugrade | 1 |
| 9R***42 | Plug As | 1 |
| 9R***58 | Cord As | 1 |
258-4127 Kit-Work Tool Wiring
| 25***27 | Kit-Work Tool Wiring | 1 |
| 27***00 | Lens; (Amber)(Warning Beacon) | 1 |
| 9R***42 | Plug As | 1 |
234-4328 Lamp Gp-Flood
| 23***28 | Lamp Group-Flood; -Front, Rear, Wide Range | 3 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
195-0190 Lamp Gp-Head & Signal -Lh-High, Low Beam
| 08***48 | Lamp; (12-Volt, 5-Watt) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
195-0189 Lamp Gp-Head & Signal -Rh-High, Low Beam
| 08***48 | Lamp; (12-Volt, 5-Watt) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
128-6985 Lamp Gp-Warning Beacon -Amber, Magnetic Mount, Rotating
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 16***95 | Lens | 1 |
309-1325 Lamp Gp-Warning Beacon -Amber
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 26***23 | Switch As-Rocker; (Warning Beacon) | 1 |
258-4164 Lighting Gp-Flood -Work Lights, Front
| 24***97 | Cable-Coiled; (Sensor) | 1 |
| 25***29 | Receiver Group-Laser; (Lr410) | 1 |
| 25***29 | Case-Carrying | 1 |
258-4130 Lighting Gp-Roading -Head, Signal, Stop, Tail
| 1H***44 | Lockwasher (Bracket To Cab) | 2 |
| 25***30 | Lighting Group-Roading; -Head, Signal, Stop, Tail | 1 |
| 26***80 | Fuse; (20-Ampere)(Main) | 1 |
333-4957 Lighting Gp-Roading -Rear
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 33***57 | Lighting Group-Roading; -Rear | 1 |
258-4169 Lighting Gp-Stop & Tail
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 3 |
| 25***69 | Lighting Group-Stop & Tail | 1 |
258-4184 Lighting Gp-Warning Beacon -Amber, Magnetic Mount, Rotating
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 17***49 | Strap; (Marker) | 1 |
| 25***84 | Lighting Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
292-1271 Mast Gp -Accugrade Laser
| 23***74 | Switch-Temperature; (Engine Coolant, Cold Start) | 1 |
| 29***71 | Mast Group; -Accugrade Laser | 1 |
| 32***52 | Switch-Oil Press; (Engine) | 1 |
258-4135 Relay Gp -Main Power
| 25***35 | Relay Group; -Main Power | 1 |
| 30***87 | Control Group-Unprogrammed; (Transmission) | 1 |
| 35***39 | Software Group-Machine | 1 |
266-1467 Sensor Gp-Position -Rotary
| 10***85 | Cap-Starting Motor | 1 |
| 10***12 | Kit-Contact; (Starting Motor) | 1 |
| 10***13 | Switch As; (Starting Motor)(12-Volt) | 1 |
160-2443 Sensor Gp-Position
| 16***43 | Sensor Group-Position; -Brake Pedal | 1 |
| 34***36 | Control Group-Unprgmed Monitor; (Machine) | 1 |
| 35***58 | Software Group-Monitor | 1 |
191-8303 Sensor Gp-Speed
| 14***39 | Starting Motor Group-Electric; -12-Volt | 1 |
| 19***03 | Sensor Group-Speed | 1 |
262-3764 Sensor Gp-Speed
| 26***64 | Sensor Group-Speed; -Motor | 1 |
| 32***52 | Switch-Oil Press; (Engine) | 1 |
238-8277 Sensor Gp-Temp & Press -Engine
| 10***74 | Seal-Connector | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
143-0539 Starting Motor Gp-Electric
| 10***05 | Cap-Receptacle | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
287-6181 Starting Motor Gp-Electric
| 03***12 | Terminal-Ring; (2-Ga, 1/4-In Screw)(Circuit Breaker) | 1 |
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
300-1071 Switch Gp-Pressure
| 03***12 | Terminal-Ring; (2-Ga, 1/4-In Screw)(Circuit Breaker) | 1 |
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
258-4100 Wiring Gp-Cab
| 15***49 | Cable-Electrical; (03050 mm ) | 0 |
| 15***50 | Cable; (00-Ga, Black)(183-cm Each) | 0 |
| 17***20 | Strap-Dual Clamp | 5 |
258-4115 Wiring Gp-Engine
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
258-4192 Wiring Gp-Engine -Battery
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***39 | Relay As | 5 |
336-0913 Wiring Gp-Grade Control
| 14***23 | Housing-Axle | 1 |
| 14***29 | Spacer; (57.16x69.85x27.54-mm Thk) | 1 |
| 15***52 | Seal-Lip Type | 1 |
258-4146 Wiring Gp-Heater
| 14***29 | Spacer; (57.16x69.85x27.54-mm Thk) | 1 |
| 15***52 | Seal-Lip Type | 1 |
| 15***10 | Cone-Bearing | 1 |
258-4107 Wiring Gp-Machine
| 25***57 | Axle Group; -Standard | 4 |
| 25***07 | Wiring Group-Machine | 1 |
258-4190 Wiring Gp-Quick Coupler
| 25***57 | Axle Group; -Heavy-Duty | 4 |
| 25***90 | Wiring Group-Quick Coupler | 1 |
258-4125 Wiring Gp-Work Tool
| 10***66 | Bolt; (Self Locking) (M16x2x40mm) | 4 |
| 14***33 | Retainer | 2 |
| 14***36 | Nut; (9/16-18-Thd) | 32 |
Engine Arrangement
295-7114 Engine Ar
| 28***74 | Engine Ar-Primary | 1 |
| 29***14 | Engine Ar | 1 |
| 31***06 | Engine Ar-Primary | 1 |
258-2518 Engine Ar
| 25***18 | Engine Ar | 1 |
| 26***89 | Engine Ar-Primary | 1 |
262-7289 Engine Ar-Primary
| 23***73 | Camshaft Group | 1 |
| 23***80 | Cover Group-Valve Mechanism | 1 |
| 23***00 | Cylinder Head Group | 1 |
319-6806 Engine Ar-Primary
| 23***80 | Valve Mechanism Group | 1 |
| 23***95 | Pump Group-Engine Oil | 1 |
| 23***04 | Glow Plug Group | 1 |
287-8074 Engine Ar-Primary
| 23***80 | Valve Mechanism Group | 1 |
| 23***95 | Pump Group-Engine Oil | 1 |
| 23***04 | Glow Plug Group | 1 |
258-2445 Installation Ar-Engine
| 25***45 | Installation Ar-Engine | 1 |
| 25***47 | Mounting Group-Engine | 1 |
| 25***52 | Drain Group-Engine Oil | 1 |
295-7118 Installation Ar-Engine
| 25***47 | Mounting Group-Engine | 1 |
| 25***52 | Drain Group-Engine Oil | 1 |
| 25***65 | Lines Group-Air | 1 |
Frame And Body
258-3804 Conversion Ar-Roading -Italy
| 14***32 | Pin As | 1 |
| 15***05 | Bolt-Shoulder | 2 |
| 22***40 | Latch As | 1 |
258-3802 Conversion Ar-Roading -Germany
| 25***02 | Conversion Ar-Roading; -Germany | 1 |
| 31***94 | Grill | 1 |
| 7T***99 | Link | 1 |
258-3800 Conversion Ar-Roading -Nacd
| 25***66 | Counterweight; (Lh) | 1 |
| 25***67 | Counterweight; (Rh) | 1 |
| 25***00 | Conversion Ar-Roading; -Nacd | 1 |
258-3841 Conversion Gp-Roading -Italy
| 22***15 | Plate As | 1 |
| 24***77 | Bolt; (M8x1.25x12-mm) | 1 |
| 25***41 | Conversion Group-Roading; -Italy | 1 |
258-3840 Conversion Gp-Roading -Germany
| 25***74 | Frame Group-Machine | 1 |
| 25***78 | Plate As | 1 |
| 25***84 | Cover | 2 |
258-2591 Counterweight Gp
| 25***91 | Counterweight Group | 1 |
| 31***41 | Counterweight | 2 |
| 7X***49 | Bolt (M12x1.75x100mm); (M12x1.75x100-mm) | 4 |
258-3395 Counterweight Gp
| 25***92 | Plate | 8 |
| 25***95 | Counterweight Group | 1 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 4 |
322-1644 Door As-Access -Vented
| 28***67 | Film-Instruction; (Service Chart, Read Omm)(Service Chart) | 1 |
| 28***68 | Film-Instruction; (Service Chart, Read Omm)(Service Chart) | 1 |
| 28***69 | Film-Instruction; (Service Chart, Read Omm)(Service Chart) | 1 |
258-2594 Enclosure Gp-Engine
| 12***18 | Seal; (1000-cm) | 0 |
| 13***27 | Seal; (69-cm) | 0 |
| 17***79 | Insulation | 1 |
258-2675 Frame & Mtg Gp-Machine
| 08***48 | Lamp; (12-Volt, 5-Watt) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
258-2674 Frame Gp-Machine
| 17***91 | Nut-Spring | 4 |
| 17***16 | Chock | 1 |
| 25***74 | Frame Group-Machine | 1 |
150-8621 Guide Gp-Lines
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
287-4161 Kit-Counterweight
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
287-4160 Kit-Counterweight
| 17***91 | Nut-Spring | 4 |
| 17***16 | Chock | 1 |
| 17***47 | Pin | 1 |
312-1024 Kit-Engine Enclosure -Vented
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
342-2683 Kit-Machine Enclosure Seal -Debris Barrier
| 15***80 | Washer-Hard; (22x38x6-mm Thk) | 8 |
| 25***89 | Mount | 4 |
| 25***92 | Bracket As-Lift | 1 |
311-8704 Kit-Machine Enclosure Seal -Debris Barrier
| 15***80 | Washer-Hard; (22x38x6-mm Thk) | 8 |
| 25***91 | Plate-Lift | 4 |
| 31***04 | Kit-Machine Enclosure Seal; -Debris Barrier | 1 |
333-7434 Kit-Roading Conversion -Germany
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
| 17***20 | Strap-Dual Clamp | 5 |
258-3884 Kit-Roading Conversion -Lights, Mirrors
| 15***80 | Washer-Hard; (22x38x6-mm Thk) | 8 |
| 25***84 | Kit-Roading Conversion; -Lights, Mirrors | 1 |
| 25***89 | Mount | 4 |
315-7815 Kit-Roading Conversion -Germany
| 13***66 | Mirror Group-Rear View | 2 |
| 14***71 | Clamp; (Top)(Top) | 1 |
| 14***72 | Clamp; (Bottom)(Bottom) | 1 |
315-7816 Kit-Roading Conversion -Italy
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
333-7436 Kit-Roading Conversion -Front
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 1 |
| 24***59 | Cover-Insulation | 1 |
| 24***60 | Cover-Insulation | 1 |
333-7435 Kit-Roading Conversion -Italy
| 17***79 | Insulation | 1 |
| 26***78 | Insulation | 1 |
| 26***79 | Insulation | 1 |
258-4410 Lifting Gp-Machine -Kit, Four Point
| 25***10 | Lifting Group-Machine; -Kit, Four Point | 1 |
258-4390 Lifting Gp-Machine -Kit, Single Point
| 25***90 | Lifting Group-Machine; -Kit, Single Point | 1 |
258-4385 Lifting Gp-Machine -Four Point
| 17***79 | Insulation | 2 |
| 25***85 | Lifting Group-Machine; -Four Point | 1 |
| 29***55 | Insulation | 1 |
258-3872 Mirror & Mtg Gp-Rear View -With Roading Light Mount
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
| 22***32 | Cap; (Gas Valve) | 1 |
| 22***52 | Valve-Gas; (Brake Accumulator) | 1 |
258-3848 Mounting Gp-Registration -Italian
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
| 22***32 | Cap; (Gas Valve) | 1 |
| 22***52 | Valve-Gas; (Brake Accumulator) | 1 |
307-6237 Mounting Gp-Roading Lights -Kit, Germany, Italy
| 06***43 | Ring-Snap | 1 |
| 21***55 | Pin As | 1 |
| 21***43 | Bushing | 1 |
294-4560 Suppression Gp-Sound -Machine
| 16***13 | Kit-Seal | 1 |
| 29***60 | Suppression Group-Sound; -Machine | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
258-3496 Suppression Gp-Sound -Machine
| 06***43 | Ring-Snap | 1 |
| 21***55 | Pin As | 1 |
| 21***43 | Bushing | 1 |
280-8330 Suppression Gp-Sound -Engine
| 23***66 | Pin As | 6 |
| 23***99 | Spacer; (25.4x28.4x13-mm Thk) | 12 |
| 24***70 | Spacer; (8.2x13x6-mm Thk) | 6 |
Fuel System
295-7463 Control Gp-Governor
| 13***87 | Clip | 1 |
| 19***36 | Insert-Threaded; (M6x1-Thd) | 3 |
| 23***96 | Screw-Flat Head; (M6x1x35-mm) | 4 |
280-6340 Control Gp-Governor
| 13***87 | Clip | 1 |
| 19***36 | Insert-Threaded; (M6x1-Thd) | 3 |
| 23***96 | Screw-Flat Head; (M6x1x35-mm) | 4 |
295-7465 Control Gp-Governor
| 06***80 | Fitting | 1 |
| 11***01 | Bowl As-Water Collection | 1 |
| 11***18 | Ring-Retaining | 1 |
335-5751 Lines Gp-Fuel
| 09***35 | Cap | 1 |
| 09***90 | Shim (1.800mm Thick) | 0 |
| 09***94 | Shim (0.700mm Thick) | 0 |
295-7029 Lines Gp-Fuel
| 09***35 | Cap | 1 |
| 11***63 | Support | 4 |
| 11***64 | Hose | 4 |
235-5901 Lines Gp-Fuel Injection
| 09***35 | Cap | 1 |
| 11***63 | Support | 4 |
| 11***64 | Hose | 4 |
314-9909 Lines Gp-Fuel Injection
| 06***80 | Fitting | 1 |
| 11***01 | Bowl As-Water Collection | 1 |
| 11***18 | Ring-Retaining | 1 |
258-2444 Lines Gp-Fuel Prm & Filter
| 21***10 | Nut | 1 |
| 22***43 | Gasket | 1 |
| 22***44 | Flange | 1 |
235-5902 Pump Gp-Fuel Injection
| 14***17 | Bolt; (M10x1.25x25-mm) | 1 |
| 19***56 | Clip | 1 |
| 19***33 | Bolt | 1 |
335-5752 Pump Gp-Fuel Injection
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 25***40 | Tank Group-Fuel | 1 |
314-9911 Pump Gp-Fuel Injection
| 14***17 | Bolt; (M10x1.25x25-mm) | 1 |
| 19***56 | Clip | 1 |
| 19***33 | Bolt | 2 |
258-3442 Pump Gp-Fuel Prm & Prim Filter -Water Separator
| 00***64 | Seal-O-Ring | 1 |
| 14***28 | Elbow | 1 |
| 23***37 | Fitting | 1 |
258-2439 Tank & Mtg Gp-Fuel
| 11***58 | Pulley-Alternator | 1 |
| 11***59 | Frame As-Alternator | 1 |
| 11***60 | Rotor As-Alternator | 1 |
258-2440 Tank Gp-Fuel
| 10***14 | Alternator Group-Charging | 1 |
| 23***62 | Plate | 1 |
| 23***73 | Bolt; (M10x1.5x90-mm) | 1 |
Hydraulic System
149-0686 Accumulator Gp-Hydraulic -Charged
| 14***86 | Accumulator Group-Hydraulic; -Charged | 1 |
| 26***41 | Kit-Seal | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
227-8807 Accumulator Gp-Hydraulic -Uncharged
| 17***85 | Kit-Seal | 1 |
| 22***07 | Accumulator Group-Hydraulic; -Uncharged | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
310-8460 Accumulator Gp-Ride Control -Charged
| 25***97 | Bearing-Sleeve | 1 |
| 28***91 | Kit-Seal | 1 |
| 2K***21 | Locknut (5/8-18 Thd) | 1 |
310-8461 Accumulator Gp-Ride Control -Uncharged
| 25***97 | Bearing-Sleeve | 1 |
| 25***42 | Bearing-Sleeve | 1 |
| 27***70 | Kit-Seal; (Hydraulic Cylinder) | 1 |
230-5406 Cylinder & Mtg Gp-Angle Blade
| 23***06 | Cylinder & Mtg Group-Angle Blade | 1 |
231-5274 Cylinder & Mtg Gp-Angle Blade
| 17***58 | Kit-Seal | 1 |
| 21***55 | Rod End As | 1 |
| 23***74 | Cylinder & Mtg Group-Angle Blade | 1 |
293-6264 Cylinder Gp-Bucket
| 02***87 | Fitting-Grease; (Universal Joint) | 2 |
| 26***40 | Kit-Seal; (Swing Cylinder) | 1 |
| 27***25 | Rod As | 1 |
154-5018 Cylinder Gp-Bucket
| 02***87 | Fitting-Grease; (Universal Joint) | 2 |
| 15***18 | Cylinder Group-Bucket | 1 |
| 26***40 | Kit-Seal; (Swing Cylinder) | 1 |
255-0943 Cylinder Gp-Grapple
| 21***24 | Kit-Seal; (Lift) | 2 |
| 25***43 | Cylinder Group-Grapple | 1 |
| 25***12 | Cylinder Group-Lift | 2 |
278-1975 Cylinder Gp-Grapple -Industrial
| 21***43 | Fitting As; (Quick Disconnect, Male) | 1 |
| 21***44 | Fitting As; (Quick Disconnect, Male) | 1 |
| 27***75 | Cylinder Group-Grapple; -Industrial | 1 |
164-9295 Cylinder Gp-Grapple
| 16***95 | Cylinder Group-Grapple | 1 |
| 25***97 | Bearing-Sleeve | 1 |
| 27***70 | Kit-Seal; (Hydraulic Cylinder) | 1 |
278-1969 Cylinder Gp-Hydraulic
| 25***78 | Lines Group-Hydraulic; -Work Tool Positioner | 1 |
| 25***68 | Manifold & Mtg Group-Control; -Work Tool Positioner | 1 |
| 27***69 | Cylinder Group-Hydraulic | 1 |
274-9931 Cylinder Gp-Hydraulic -Angle Blade
| 25***76 | Lines Group-Hydraulic | 1 |
| 27***31 | Cylinder Group-Hydraulic; -Angle Blade | 1 |
225-9521 Cylinder Gp-Hydraulic -Angle Blade
| 22***21 | Cylinder Group-Hydraulic; -Angle Blade | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
| 30***52 | Tee | 1 |
192-2640 Cylinder Gp-Hydraulic -Coupler
| 19***40 | Cylinder Group-Hydraulic; -Coupler | 1 |
| 21***45 | Fitting As; (Quick Disconnect, Female) | 1 |
| 21***46 | Fitting As; (Quick Disconnect, Female) | 1 |
274-9930 Cylinder Gp-Hydraulic -Angle Blade
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
| 22***74 | Spacer; (13x20x7-mm Thk) | 1 |
| 27***30 | Cylinder Group-Hydraulic; -Angle Blade | 1 |
258-2512 Cylinder Gp-Lift
| 25***11 | Lines Group-Lift Cylinder | 1 |
| 25***12 | Lines Group-Tilt Cylinder | 1 |
| 25***34 | Tank & Mtg Group-Hydraulic | 1 |
293-5710 Cylinder Gp-Lift
| 25***22 | Lines Group-Work Tool | 1 |
| 25***02 | Valve & Mtg Group-Control | 1 |
| 25***56 | Pump & Mtg Group-Work Tool | 1 |
258-2558 Cylinder Gp-Lift Arm -Radial Lift
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
293-5712 Cylinder Gp-Tilt -Lh
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
258-2514 Cylinder Gp-Tilt -Rh
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***73 | Clip | 2 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
258-2515 Cylinder Gp-Tilt -Lh
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***39 | Relay As | 1 |
| 14***15 | Connector As | 1 |
293-5711 Cylinder Gp-Tilt -Rh
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
292-2439 Fitting Gp-Hydraulic -1-Speed
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
285-2190 Fitting Gp-Hydraulic -Manual
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
218-5841 Fitting Gp-Hydraulic -Quick Disconnect, Female, High Flow
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***95 | Fitting As; (Quick Disconnect, Male) | 1 |
218-5840 Fitting Gp-Hydraulic -Quick Disconnect, Male, High Flow
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
258-3733 Hydraulic Ar
| 14***15 | Connector As | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 6 |
| 14***42 | Connector Group | 2 |
258-2600 Hydraulic Ar
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***95 | Fitting As; (Quick Disconnect, Male) | 1 |
304-6743 Hydraulic Ar
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 13***51 | Spacer; (11x19x6-mm Thk) | 1 |
| 14***25 | Connector As. | 4 |
258-2428 Hydraulic Ar -Work Tool Positioner
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
258-3182 Hydraulic Ar -High Flow
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
258-3730 Hydraulic Ar
| 14***19 | Connector As | 2 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
258-2426 Hydraulic Ar
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
258-3180 Hydraulic Ar
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***95 | Fitting As; (Quick Disconnect, Male) | 1 |
258-3910 Kit-Quick Coupler Conversion -Hydraulic
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 13***51 | Spacer; (11x19x6-mm Thk) | 1 |
| 14***25 | Connector As. | 4 |
304-6754 Kit-Ride Control
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***95 | Fitting As; (Quick Disconnect, Male) | 1 |
258-3915 Kit-Work Tool Positioner -Self-Leveling Hydraulics
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 16***89 | Hose As | 2 |
285-6113 Lines Gp-Bucket -Utility
| 11***61 | Hose As | 1 |
| 14***15 | Connector As | 2 |
| 14***16 | Connector Group | 2 |
279-5416 Lines Gp-Bucket -Multipurpose
| 11***61 | Hose As | 1 |
| 14***15 | Connector As | 2 |
| 14***16 | Connector Group | 2 |
279-5415 Lines Gp-Bucket -Multipurpose
| 11***61 | Hose As | 1 |
| 14***15 | Connector As | 2 |
| 14***16 | Connector Group | 2 |
279-5414 Lines Gp-Bucket -Multipurpose
| 11***61 | Hose As | 1 |
| 14***15 | Connector As | 2 |
| 14***16 | Connector Group | 2 |
154-5019 Lines Gp-Bucket -Multipurpose
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***19 | Lines Group-Bucket; -Multipurpose | 1 |
154-5052 Lines Gp-Bucket -Multipurpose
| 14***41 | Connector Group | 2 |
| 15***52 | Lines Group-Bucket; -Multipurpose | 1 |
| 25***80 | Tube As | 1 |
279-5413 Lines Gp-Bucket -Multipurpose
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
279-5412 Lines Gp-Bucket -Industrial
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***39 | Relay As | 1 |
| 14***15 | Connector As | 1 |
293-0140 Lines Gp-Bucket -Multipurpose
| 14***97 | Block | 2 |
| 25***39 | Hose As | 4 |
| 25***64 | Tube As | 1 |
231-5273 Lines Gp-Connecting
| 11***49 | Fitting As; (Quick Disconnect) | 1 |
| 14***62 | Elbow Group | 1 |
| 15***49 | Elbow As | 1 |
177-1986 Lines Gp-Connecting
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
| 15***43 | Connector As. | 1 |
258-2424 Lines Gp-Coupler
| 11***49 | Fitting As; (Quick Disconnect) | 2 |
| 14***61 | Elbow Group | 1 |
| 14***62 | Elbow Group | 1 |
161-0187 Lines Gp-Grapple
| 11***49 | Fitting As; (Quick Disconnect) | 2 |
| 14***61 | Elbow Group | 1 |
| 14***62 | Elbow Group | 1 |
286-9250 Lines Gp-Grapple
| 11***49 | Fitting As; (Quick Disconnect) | 2 |
| 14***52 | Elbow As. | 1 |
| 14***61 | Elbow Group | 1 |
286-9279 Lines Gp-Grapple
| 11***49 | Fitting As; (Quick Disconnect) | 1 |
| 14***52 | Elbow As. | 1 |
| 14***61 | Elbow Group | 1 |
258-2876 Lines Gp-Hydraulic
| 06***58 | Clamp | 2 |
| 10***03 | Plate-Cover | 3 |
| 14***93 | Elbow Group | 2 |
304-6745 Lines Gp-Hydraulic -Ride Control, Work Tool Positioner
| 10***03 | Plate-Cover | 3 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
| 14***93 | Elbow Group | 2 |
258-2878 Lines Gp-Hydraulic -Work Tool Positioner
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 5 |
258-2786 Lines Gp-Hydraulic Fan
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
| 15***43 | Connector As. | 1 |
258-2582 Lines Gp-Hydraulic Fan -Radiator
| 10***73 | Clip | 2 |
| 25***82 | Lines Group-Hydraulic Fan; -Radiator | 1 |
| 25***90 | Bracket As | 1 |
258-2780 Lines Gp-Hydraulic Oil Cooler
| 25***80 | Lines Group-Hydraulic Oil Cooler | 1 |
| 25***60 | Bracket As | 1 |
| 27***64 | Manifold Group-Control; -Motor, 2-Speed | 1 |
258-2411 Lines Gp-Lift Cylinder
| 25***11 | Lines Group-Lift Cylinder | 1 |
| 25***01 | Manifold & Solenoid Group-Control; -Work Tool Positioner | 1 |
| 4P***34 | Clip-Ladder; (00800 mm ) | 1 |
258-3393 Lines Gp-Lowering Control -Manual
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 15***79 | Kit-Seal; (Relief Valve, Conveyor Cont) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
258-3238 Lines Gp-Pump -High Flow
| 23***28 | Coil As | 1 |
| 25***77 | Motor Group-Gear; (Fan, Demand) | 1 |
| 25***38 | Lines Group-Pump; -High Flow | 1 |
258-3237 Lines Gp-Pump
| 18***51 | Washer-Hard; (5.3x8.8x2-mm Thk) | 8 |
| 19***08 | Seal-O-Ring | 1 |
| 21***14 | Seal-O-Ring | 1 |
258-2412 Lines Gp-Tilt Cylinder
| 15***12 | Pin | 2 |
| 15***13 | Pin | 2 |
| 25***12 | Lines Group-Tilt Cylinder | 1 |
258-2421 Lines Gp-Work Tool -High Flow
| 15***13 | Plate | 1 |
| 15***41 | Pin | 2 |
| 15***42 | Pin | 2 |
258-2422 Lines Gp-Work Tool
| 15***13 | Pin | 2 |
| 25***22 | Lines Group-Work Tool | 1 |
| 6V***89 | Locknut; (M8x1.25-Thd) | 2 |
258-3462 Manf & Solenoid Mtg Gp-Accum -Pilot Shutoff
| 15***41 | Pin | 2 |
| 15***42 | Pin | 2 |
| 25***62 | Manf & Solenoid Mtg Group-Accum; -Pilot Shutoff | 1 |
304-6755 Manf & Solenoid Mtg Gp-Accum
| 25***60 | Pump Group-Gear | 1 |
| 27***60 | Washer-Hard; (15x22x2.5-mm Thk) | 4 |
| 27***14 | Kit-Seal; (Gear Pump) | 1 |
258-3394 Manifold & Lines Gp-Accum
| 25***53 | Pump Group-Gear | 1 |
| 25***94 | Manifold & Lines Group-Accum | 1 |
| 27***60 | Washer-Hard; (15x22x2.5-mm Thk) | 4 |
258-3468 Manifold & Mtg Gp-Control -Work Tool Positioner
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 2 |
| 25***54 | Pump Group-Piston; -High Flow | 1 |
| 25***61 | Pump Group-Gear | 1 |
258-3463 Manifold & Mtg Gp-Control -Motor, 2-Speed
| 11***04 | Bolt-Socket Head; (M12x1.75x45-mm) | 4 |
| 23***86 | Kit-Bearing; (Generator Pump) | 1 |
| 23***87 | Kit-Bearing; (Generator Pump) | 1 |
231-5278 Manifold & Mtg Gp-Control -Angling Blade
| 10***04 | Bolt; (Socket Head) (M10x1.5x30mm) | 2 |
| 23***78 | Manifold & Mtg Group-Control; -Angling Blade | 1 |
| 25***54 | Pump Group-Piston; -High Flow | 1 |
258-2801 Manifold & Solenoid Gp-Control -Work Tool Positioner
| 25***35 | Tank Group-Hydraulic | 1 |
| 25***01 | Manifold & Solenoid Group-Control; -Work Tool Positioner | 1 |
| 25***47 | Bracket | 1 |
274-8563 Manifold Gp-Control -Pilot Shutoff
| 25***04 | Strainer As; (Hydraulic Tank) | 1 |
| 26***90 | Gauge Group-Sight; (Hydraulic Tank) | 1 |
| 27***63 | Manifold Group-Control; -Pilot Shutoff | 1 |
258-9011 Manifold Gp-Control -Angling Blade
| 13***45 | Pad; (Connector) | 1 |
| 14***37 | Cap As-Filler; (Hydraulic Tank) | 1 |
| 25***06 | Tank Group-Hydraulic | 1 |
274-8564 Manifold Gp-Control -Motor, 2-Speed
| 11***52 | Spacer; (13x25x22.14-mm Thk) | 2 |
| 23***25 | Stud; (M10x1.5-Thd) | 1 |
| 25***06 | Valve Group-Control | 1 |
291-0010 Manifold Gp-Control -Quick Coupler
| 11***52 | Spacer; (13x25x22.14-mm Thk) | 2 |
| 23***25 | Stud; (M10x1.5-Thd) | 1 |
| 25***07 | Valve Group-Control; -High Flow | 1 |
307-2276 Manifold Gp-Ride Control -Accumulator
| 00***82 | Spring | 3 |
| 12***16 | Bolt-Shoulder | 1 |
| 14***31 | Valve-Check | 3 |
307-2275 Manifold Gp-Ride Control
| 30***75 | Manifold Group-Ride Control | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 6V***97 | Seal (Later Machines And Field Installed) | 1 |
258-2579 Motor & Mtg Gp-Hydraulic Fan
| 18***54 | Valve Group-Solenoid; -Auxiliary | 6 |
| 19***00 | Valve Group-Solenoid; -12-Volt-Work Tool | 2 |
| 20***71 | Cap | 1 |
154-5011 Mounting Gp-Cylinder
| 11***61 | Seal Kit; (Includes Seals, Thrust Ring, Stem And Connectors) | 1 |
| 15***11 | Mounting Group-Cylinder | 1 |
| 20***71 | Valve Group-Manual; (Coupler Pin, Lift Arm Lwr Cont) | 1 |
156-0891 Mounting Gp-Cylinder -Industrial
| 13***76 | Seal-O-Ring | 1 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
286-9248 Mounting Gp-Cylinder -Grapple Bucket
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
| 21***73 | Nut; (1/2-28-Thd) | 1 |
| 22***29 | Coil As-Solenoid; (12-Volt)(Modulating Valve) | 1 |
165-8731 Mounting Gp-Cylinder -Utility
| 12***98 | Seat | 1 |
| 12***99 | Seat | 1 |
| 13***49 | Connector | 1 |
258-3402 Pump & Mtg Gp-Gear
| 20***71 | Kit-Seal; (Solenoid Valve) | 1 |
| 21***61 | Flange | 1 |
| 25***02 | Pump & Mtg Group-Gear | 1 |
258-2556 Pump & Mtg Gp-Work Tool
| 25***56 | Pump & Mtg Group-Work Tool | 1 |
| 4K***09 | Bearing-Sleeve | 4 |
| 6K***48 | Bearing-Sleeve | 4 |
258-2557 Pump & Mtg Gp-Work Tool -High Flow
| 14***91 | Pin As | 2 |
| 14***94 | Pin | 1 |
| 1H***34 | Ring-Retaining; (External) | 4 |
258-2554 Pump Gp-Piston -High Flow
| 15***62 | Film-Information; (Tie-Down Location) | 2 |
| 18***33 | Step Group-Material Handling Arm | 1 |
| 21***50 | Arm As | 1 |
258-3401 Pump Gp-Piston & Gear
| 13***86 | Edge Group-Cutting | 1 |
| 17***80 | Frame Group-Blade | 1 |
| 17***81 | Blade Group-Angling | 1 |
258-2434 Tank & Mtg Gp-Hydraulic
| 14***41 | Edge Group-Cutting | 1 |
| 17***80 | Frame Group-Blade | 1 |
| 17***82 | Blade Group-Angling | 1 |
258-2806 Tank Gp-Hydraulic
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
258-2435 Tank Gp-Hydraulic
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
258-2503 Valve & Mtg Gp-Control -High Flow
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***40 | Pin | 2 |
| 16***19 | Pin As | 2 |
258-2502 Valve & Mtg Gp-Control
| 22***21 | Trunnion As | 1 |
| 22***79 | Plate As | 1 |
| 22***28 | Plate As | 1 |
6e-4701 Valve Gp-Check -Pilot Oil
| 16***89 | Tack-Fastener | 4 |
| 22***12 | Blade As-Angling | 1 |
| 22***46 | Edge Group-Bit & Cutting | 1 |
336-1323 Valve Gp-Control
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***80 | Blade Group-Multipurpose Bucket | 1 |
| 16***89 | Tack-Fastener | 4 |
258-2506 Valve Gp-Control
| 16***89 | Tack-Fastener | 4 |
| 22***45 | Edge Group-Bit & Cutting | 1 |
| 22***25 | Frame Group-Blade | 1 |
336-1322 Valve Gp-Control -Implement
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***85 | Blade Group-Multipurpose Bucket | 1 |
258-2507 Valve Gp-Control -High Flow
| 15***77 | Edge | 1 |
| 25***07 | Valve Group-Control; -High Flow | 1 |
112-1817 Valve Gp-Manual -Lowering Control
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
295-1799 Valve Gp-Relief -Main
| 15***37 | Edge | 1 |
| 29***99 | Valve Group-Relief; -Main | 1 |
211-3014 Valve Gp-Shuttle -High Flow
| 15***59 | Edge | 1 |
| 21***14 | Valve Group-Shuttle; -High Flow | 1 |
195-9700 Valve Gp-Solenoid -12-Volt
| 15***77 | Edge | 1 |
| 19***00 | Valve Group-Solenoid; -12-Volt-Work Tool | 1 |
185-4254 Valve Gp-Solenoid
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 18***54 | Valve Group-Solenoid; -Auxiliary | 1 |
Implements
287-4198 Arm As-Lift
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***95 | Blade Group-Multipurpose Bucket | 1 |
258-2699 Pin Gp-Lift Arm -With Support
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 25***99 | Pin Group-Lift Arm; -With Support | 1 |
Lubrication System
287-6016 Breather Gp
| 15***28 | Clamp | 2 |
| 23***37 | Clip-Hose | 1 |
| 23***38 | Clip | 3 |
235-5897 Filter Gp-Engine Oil
| 09***37 | Seal-O-Ring | 1 |
| 09***71 | Seal-O-Ring (Id=94.40mm) | 1 |
| 1R***34 | Filter-Engine Oil | 1 |
314-9901 Filter Gp-Engine Oil
| 23***94 | Strainer As-Oil; (Engine) | 1 |
| 23***13 | Seal-O-Ring | 1 |
| 31***01 | Filter Group-Engine Oil | 1 |
287-5377 Lines Gp-Engine Oil
| 10***44 | Nut | 1 |
| 10***83 | Seal-O-Ring | 1 |
| 11***41 | Pump As-Oil | 1 |
235-5895 Pump Gp-Engine Oil
| 10***25 | Valve As; (Oil Bypass)(Engine) | 1 |
| 23***96 | Gasket | 1 |
| 23***96 | Gasket | 1 |
287-5665 Valve Gp-Engine Oil Relief
| 09***13 | Seal-O-Ring | 4 |
| 09***21 | Plug | 2 |
| 19***22 | Bolt As; (M8x1.25x22-mm) | 11 |
Machine Arrangement
295-7291 Chassis Ar
| 15***21 | Guide Group-Lines | 1 |
| 25***39 | Tank & Mtg Group-Fuel | 1 |
| 25***58 | Cylinder Group-Lift Arm; -Radial Lift | 1 |
258-2410 Chassis Ar
| 15***21 | Guide Group-Lines | 1 |
| 25***10 | Chassis Ar | 1 |
| 25***39 | Tank & Mtg Group-Fuel | 1 |
295-7256 Common Ar
| 25***00 | Hydraulic Ar | 1 |
| 25***91 | Film Group; -256c | 1 |
| 25***95 | Counterweight Group | 1 |
258-3256 Common Ar
| 25***10 | Chassis Ar | 1 |
| 25***45 | Installation Ar-Engine | 1 |
| 25***00 | Hydraulic Ar | 1 |
342-5011 Control Ar-Machine -Aux Proportional Flow
| 25***04 | Control Group-Electrohydraulic; -Lh, High Flow | 1 |
| 25***06 | Control Group-Electrohydraulic; -Rh | 1 |
| 25***25 | Wiring Group-Work Tool | 1 |
342-5009 Control Ar-Machine -On, Off Auxiliary Control
| 25***03 | Control Group-Electrohydraulic; -Lh | 1 |
| 25***05 | Control Group-Electrohydraulic; -Rh | 1 |
| 34***09 | Control Ar-Machine; -On, Off Auxiliary Control | 1 |
342-5010 Control Ar-Machine -Aux Proportional Flow
| 25***03 | Control Group-Electrohydraulic; -Lh | 1 |
| 25***06 | Control Group-Electrohydraulic; -Rh | 1 |
| 34***10 | Control Ar-Machine; -Auxiliary Proportional Flow | 1 |
258-3803 Conversion Ar-Machine -Outside Nacd
| 25***79 | Motor & Mtg Group-Hydraulic Fan | 1 |
| 25***96 | Suppression Group-Sound; -Machine | 1 |
| 25***03 | Conversion Ar-Machine; -Outside Nacd | 1 |
315-6354 Conversion Ar-Machine
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 25***79 | Motor & Mtg Group-Hydraulic Fan | 1 |
258-3682 Machine Ar-Special -Work Tool Positioner, 2-Speed
| 25***06 | Pump & Mtg Group-Hydrostatic | 1 |
| 25***28 | Hydraulic Ar; -Work Tool Positioner | 1 |
| 25***00 | Power Train Ar; -2-Speed | 1 |
300-7634 Machine Ar-Special -Extreme Service Power Train
| 25***28 | Hydraulic Ar; -Work Tool Positioner | 1 |
| 25***63 | Panel Group-Instrument; -Rh | 1 |
| 30***34 | Machine Ar-Special; -Extreme Service Power Train, Expansion Plug, Plug, Plug, Expansion | 1 |
258-3750 Machine Ar-Special -Work Tool Positioner
| 25***06 | Pump & Mtg Group-Hydrostatic | 1 |
| 25***28 | Hydraulic Ar; -Work Tool Positioner | 1 |
| 25***00 | Power Train Ar | 1 |
258-3753 Machine Ar-Special -Ride Control, Work Tool Positioner, 2-Speed
| 25***06 | Pump & Mtg Group-Hydrostatic | 1 |
| 25***28 | Hydraulic Ar; -Work Tool Positioner | 1 |
| 25***00 | Power Train Ar; -2-Speed | 1 |
258-3748 Machine Ar-Special
| 25***06 | Pump & Mtg Group-Hydrostatic | 1 |
| 25***26 | Hydraulic Ar | 1 |
| 25***00 | Power Train Ar | 1 |
304-6740 Machine Ar-Special
| 25***06 | Pump & Mtg Group-Hydrostatic | 1 |
| 25***00 | Power Train Ar; -2-Speed | 1 |
| 25***63 | Panel Group-Instrument; -Rh | 1 |
300-7629 Machine Ar-Special -Extreme Service Power Train
| 25***26 | Hydraulic Ar | 1 |
| 25***09 | Cover Group-Instrument Panel | 1 |
| 30***29 | Machine Ar-Special; -Extreme Service Power Train | 1 |
Operator Station
258-4229 Accessory Gp-Cab
| 25***29 | Accessory Group-Cab | 1 |
| 26***62 | Control Group-Joystick; -Rh | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
186-6190 Accumulator Gp-Refrigerant -Charged
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 9 |
| 18***90 | Accumulator Group-Refrigerant; -With Desiccant | 1 |
176-3900 Accumulator Gp-Refrigerant -Uncharged
| 17***00 | Accumulator Group-Refrigerant; -With Desiccant | 1 |
| 26***63 | Control Group-Joystick; -Rh, High Flow | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
258-4261 Air Conditioner & Mounting Gp
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 7 |
258-4260 Air Conditioner Ar
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 2 |
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
258-4290 Air Conditioner Gp
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
258-4311 Armrest & Mounting Gp
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
269-0258 Base As-Joystick -Lh
| 13***39 | Nut; (U-Type Retainer) | 10 |
| 21***06 | Screw-Truss Head; (M6x1x16-mm) | 10 |
| 25***27 | Screw-Truss Head; (No 12x17.46-mm) | 6 |
269-0257 Base As-Joystick -Rh
| 25***27 | Screw-Truss Head; (No 12x17.46-mm) | 2 |
| 25***28 | Plate | 1 |
| 25***94 | Insulation | 1 |
258-3742 Cab Ar-Enclosed Rops
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 2 |
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
258-3680 Cab Ar-Enclosed Rops
| 10***56 | Plug; (Switch) | 6 |
| 25***80 | Cab Ar-Enclosed Rops | 1 |
| 25***33 | Cover; (Cluster) | 1 |
258-4000 Cab Ar-Enclosed Rops
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 2 |
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
298-7198 Cable Gp-Control -Manual Lowering
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
276-0074 Cable Gp-Control
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 2 |
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
258-2468 Compressor & Mtg Gp-Refrig
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
266-2425 Condenser & Mtg Gp-Refrigerant
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
258-4280 Condenser & Mtg Gp-Refrigerant
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
266-2430 Control & Wiring Gp-Air & Temp
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
258-4299 Control Gp-Air & Temperature
| 14***71 | Louver As | 6 |
| 16***55 | Bolt; (M6x1x35-mm) | 2 |
| 20***85 | Bolt; (M8x1.25x35-mm) | 1 |
258-3407 Control Gp-Electrohydraulic -Rh, High Flow
| 10***74 | Seal-Connector | 3 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
258-3403 Control Gp-Electrohydraulic -Lh
| 15***80 | Washer-Hard; (22x38x6-mm Thk) | 8 |
| 25***03 | Control Group-Electrohydraulic; -Lh | 1 |
| 25***89 | Mount | 4 |
258-3404 Control Gp-Electrohydraulic -Lh, High Flow
| 25***04 | Control Group-Electrohydraulic; -Lh, High Flow | 1 |
| 28***14 | Handle | 1 |
| 29***37 | Nut | 1 |
258-3406 Control Gp-Electrohydraulic -Rh
| 25***06 | Control Group-Electrohydraulic; -Rh | 1 |
| 25***46 | Wiring Group-Heater | 1 |
| 25***51 | Heater & Mtg Group-Cab | 1 |
258-3405 Control Gp-Electrohydraulic -Rh
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***56 | Plug; (Switch) | 1 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
272-1790 Control Gp-Handle -Lh
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
269-0265 Control Gp-Joystick -Lh, High Flow
| 12***70 | Screw-Machine; (M6x1x40-mm) | 3 |
| 17***91 | Nut-Spring | 3 |
| 25***79 | Knob As | 1 |
269-0262 Control Gp-Joystick -Rh
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 16***72 | Speaker As-Radio | 2 |
| 17***37 | Connector; (Radio) | 1 |
269-0264 Control Gp-Joystick -Rh
| 00***10 | Elbow | 1 |
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 2 |
| 10***74 | Seal-Connector | 2 |
269-0263 Control Gp-Joystick -Rh, High Flow
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 16***72 | Speaker As-Radio | 2 |
| 17***37 | Connector; (Radio) | 1 |
269-0266 Control Gp-Joystick -Lh
| 10***96 | Clip | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***11 | Support | 1 |
258-4245 Cover Gp-Cab
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***15 | Connector | 1 |
258-4314 Cover Gp-Console -Rh, Lh
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***15 | Connector | 1 |
258-4009 Cover Gp-Instrument Panel
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***15 | Connector | 1 |
258-4070 Door & Mtg Gp-Cab -With Cab Tilt Gas Spring
| 00***10 | Elbow | 1 |
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 2 |
| 10***74 | Seal-Connector | 2 |
258-4440 Door & Mtg Gp-Cab -With Cab Tilt Gas Spring
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 25***40 | Door & Mtg Group-Cab; -With Cab Tilt Gas Spring | 1 |
| 26***33 | Switch As-Rocker; (Control Pattern Change) | 1 |
258-4080 Door & Mtg Gp-Cab -With Cab Tilt Gas Spring
| 25***85 | Window Group-Cab; -Side, Lh | 1 |
| 25***86 | Window Group-Cab; -Side, Rh | 1 |
| 25***80 | Door & Mtg Group-Cab; -With Cab Tilt Gas Spring | 1 |
258-4442 Door Gp-Cab
| 11***27 | Screw-Machine; (M6x1x30-mm) | 2 |
| 13***27 | Seal; (69-cm) | 0 |
| 17***22 | Seal; (230-cm Each) | 0 |
258-4086 Door Gp-Cab -Glass
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 13***42 | Screw-Self-Tapping; (M5x2.3x18.8-mm) | 4 |
| 25***86 | Door Group-Cab; -Glass | 1 |
258-4087 Door Gp-Cab -Polycarbonate
| 12***78 | Locknut; (M6x1-Thd) | 1 |
| 25***46 | Lever Group-Governor | 1 |
| 25***47 | Cable As | 1 |
258-4252 Duct & Filter Gp-Cab Air
| 11***27 | Screw-Machine; (M6x1x30-mm) | 2 |
| 13***27 | Seal; (69-cm) | 0 |
| 17***22 | Seal; (230-cm Each) | 0 |
258-4400 Guard Gp-Rops/Fops -Kit
| 25***27 | Screw-Truss Head; (No 12x17.46-mm) | 6 |
| 25***25 | Liner As | 1 |
| 25***26 | Cover As | 1 |
298-7197 Handle Gp
| 10***96 | Clip | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***11 | Support | 1 |
258-4251 Heater & Mtg Gp-Cab
| 00***10 | Elbow | 1 |
| 13***53 | Hose; (192.5cm) (X2) | 0 |
| 17***20 | Strap-Dual Clamp | 3 |
258-4250 Heater Ar-Cab
| 25***50 | Heater Ar-Cab | 1 |
| 5P***58 | Sleeve; (Cable Splice) | 1 |
| 5P***00 | Key Total 2 Pieces Per Unit; (Literature Compartment) | 2 |
258-4270 Heater Gp-Cab
| 25***70 | Heater Group-Cab | 1 |
| 28***70 | Mirror As; (Rear View) | 1 |
| 3B***05 | Washer,Lock Tube Assembly Mounting; Used On Engine P/N 5r698 | 1 |
258-4066 Installation Gp-Radio
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
| 25***66 | Installation Group-Radio | 1 |
337-3991 Installation Gp-Radio -Kit
| 13***40 | Locknut; (M8x1.25-Thd) | 2 |
| 21***52 | Screw-Truss Head; (M8x1.25x30-mm) | 2 |
| 25***21 | Bracket As-Mounting; (Front) | 1 |
258-2474 Kit-Air Cond & Heater Instl
| 13***40 | Locknut; (M8x1.25-Thd) | 2 |
| 21***52 | Screw-Truss Head; (M8x1.25x30-mm) | 2 |
| 25***74 | Kit-Air Cond & Heater Instl | 1 |
350-9039 Kit-Air Cond & Heater Instl
| 25***17 | Spring Group-Gas; -Includes Lift Handle | 1 |
| 25***45 | Cover Group-Cab | 1 |
| 25***10 | Seat Ar; -Static | 1 |
350-9038 Kit-Air Cond & Heater Instl
| 09***65 | Spacer; (17x40x3-mm Thk) | 2 |
| 16***95 | Washer; (16.5x71.5x3-mm Thk) | 4 |
| 19***37 | Insert-Threaded; (M8x1.25-Thd) | 1 |
305-8044 Kit-Air Conditioner Breather
| 25***17 | Spring Group-Gas; -Includes Lift Handle | 1 |
| 25***66 | Installation Group-Radio | 1 |
| 25***29 | Accessory Group-Cab | 1 |
258-2475 Kit-Air Conditioner Instl -Conversion
| 08***77 | Lamp Group-Dome; (12-Volt) | 1 |
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 74 |
| 09***34 | Terminal-Blade; (18-Ga To 22-Ga) | 4 |
258-2473 Kit-Cab Door & Mounting -Glass
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 13***42 | Screw-Self-Tapping; (M5x2.3x18.8-mm) | 4 |
| 25***73 | Kit-Cab Door & Mounting; -Glass | 1 |
258-4443 Kit-Cab Door & Mounting
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 4 |
| 12***78 | Locknut; (M6x1-Thd) | 1 |
| 16***43 | Sensor Group-Position; -Brake Pedal | 1 |
280-6084 Kit-Cab Door & Mounting -Polycarbonate
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 4 |
| 12***78 | Locknut; (M6x1-Thd) | 1 |
| 16***54 | Kit-Service; (Pedal) | 1 |
280-6077 Kit-Cab Heater & Mounting
| 25***43 | Pedal Group-Governor | 1 |
| 25***73 | Cable As; (Hand Control) | 1 |
| 28***77 | Kit-Cab Heater & Mounting | 1 |
258-2472 Kit-Cab Window -Side
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 4 |
| 12***78 | Locknut; (M6x1-Thd) | 1 |
| 16***54 | Kit-Service; (Pedal) | 1 |
292-7927 Kit-Control Pattern Change -Dedicated
| 19***54 | Sleeve | 1 |
| 29***27 | Kit-Control Pattern Change; -Dedicated | 1 |
258-4110 Kit-Control Pattern Change -Selectable
| 25***10 | Kit-Control Pattern Change; -Selectable | 1 |
| 25***73 | Cable As; (Hand Control) | 1 |
| 2R***64 | Ring-Retaining | 1 |
258-4111 Kit-Instrument Panel -Includes Creeper Control, Rh
| 13***90 | Bushing; (Radio Mount) | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 17***37 | Connector; (Radio) | 1 |
258-4045 Lever Gp-Governor
| 13***66 | Lead-Antenna | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 17***17 | Support-Radio | 1 |
327-8941 Lever Gp-Governor
| 19***54 | Sleeve | 1 |
| 32***41 | Lever Group-Governor | 1 |
258-4433 Liner Gp-Cab
| 13***90 | Bushing; (Radio Mount) | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 17***37 | Connector; (Radio) | 1 |
258-4020 Liner Gp-Cab
| 19***54 | Sleeve | 1 |
| 25***20 | Liner Group-Cab | 1 |
258-4265 Lines Gp-Air Conditioner
| 13***90 | Bushing; (Radio Mount) | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 17***37 | Connector; (Radio) | 1 |
258-4255 Lines Gp-Heater
| 19***54 | Sleeve | 1 |
| 25***55 | Lines Group-Heater | 1 |
6v-1970 Literature Gp
| 19***54 | Sleeve | 1 |
| 6V***70 | Literature Group; (Literature Compartment) | 1 |
258-4230 Mirror Gp-Rear View
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 16***72 | Speaker As-Radio | 2 |
| 17***37 | Connector; (Radio) | 1 |
305-8034 Mirror Gp-Rear View
| 25***55 | Seat Group-Suspension; -Air | 1 |
| 25***11 | Armrest & Mounting Group | 1 |
| 30***34 | Mirror Group-Rear View | 1 |
330-5011 Motor Gp-Window Wiper
| 25***54 | Seat Group-Suspension; -Mechanical | 1 |
| 25***11 | Armrest & Mounting Group | 1 |
| 33***11 | Motor Group-Window Wiper | 1 |
295-3171 Mounting Gp-Armrest -Lh
| 25***49 | Support As-Seat | 1 |
| 25***53 | Seat Group; -Static | 1 |
| 25***11 | Armrest & Mounting Group | 1 |
295-3172 Mounting Gp-Armrest -Rh
| 15***83 | Washer-Hard; (8.4x35x2.5-mm Thk) | 4 |
| 25***03 | Seat & Armrest Group; -Static | 1 |
| 29***72 | Mounting Group-Armrest; -Rh | 1 |
258-4220 Mounting Gp-Rops -Includes Step
| 15***83 | Washer-Hard; (8.4x35x2.5-mm Thk) | 4 |
| 25***20 | Mounting Group-Rops; -Includes Step | 1 |
| 25***02 | Seat & Armrest Group; -Suspension | 1 |
258-3740 Option Ar-Cab
| 25***40 | Option Ar-Cab | 1 |
| 25***50 | Seat & Mounting Group; -Static | 1 |
| 25***14 | Cover Group-Console; -Rh, Lh | 1 |
258-3738 Option Ar-Cab
| 15***83 | Washer-Hard; (8.4x35x2.5-mm Thk) | 4 |
| 25***38 | Option Ar-Cab | 1 |
| 25***01 | Seat & Armrest Group | 1 |
258-4162 Panel Gp-Instrument
| 25***51 | Seat & Mounting Group; -Suspension | 1 |
| 25***62 | Panel Group-Instrument | 1 |
| 25***14 | Cover Group-Console; -Rh, Lh | 1 |
258-4163 Panel Gp-Instrument -Rh
| 25***63 | Panel Group-Instrument; -Rh | 1 |
| 2D***12 | Washer; (7/16x15/16x1/4-In Thk) | 2 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 2 |
327-8937 Pedal Gp-Governor
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 4 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
325-8383 Pedal Gp-Governor
| 09***68 | Washer; (5x16x1.2-mm Thk) | 2 |
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 2 |
| 13***90 | Bolt-Carriage; (M8x1.25x30-mm) | 2 |
258-4043 Pedal Gp-Governor
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 21***58 | Conduit-Flexible; (227-cm) | 0 |
| 22***57 | Bolt; (5/16-18-Thd) | 2 |
280-6342 Pedal Gp-Governor
| 09***68 | Washer; (5x16x1.2-mm Thk) | 2 |
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 2 |
| 13***90 | Bolt-Carriage; (M8x1.25x30-mm) | 2 |
241-4936 Radio Gp -Am/Fm/Wb/Cd Player
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***11 | Screw-Machine; (3/8-16x0.75-In) | 1 |
337-3992 Radio Gp -Am/Fm
| 25***15 | Film-Identification; (Un)(Front) | 1 |
| 25***16 | Film-Identification; (Un)(Side) | 2 |
| 25***17 | Film-Identification; (Un)(Rear) | 2 |
288-1744 Radio Gp -Am/Fm/Wb/Cd Player
| 25***82 | Frame As; (Rh) | 1 |
| 25***65 | Latch As | 1 |
| 25***76 | Catch As; (Inner) | 1 |
284-8953 Radio Gp -Am/Fm/Wb/Cd Player
| 17***91 | Nut-Spring | 4 |
| 25***33 | Visor Group-Cab; -Lh | 1 |
| 27***42 | Screw-Truss Head; (M6x1x20-mm) | 4 |
331-5292 Radio Gp -Am, Fm
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 1 |
| 27***42 | Screw-Truss Head; (M6x1x20-mm) | 1 |
| 28***05 | Bracket As | 1 |
200-5729 Radio Gp -Am/Fm/Wb
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 4 |
| 1P***10 | Washer; (0.391x0.812x0.067-In Thk) | 4 |
| 20***29 | Radio Group; -Am/Fm/Wb | 1 |
262-9163 Radio Gp -Am/Fm Cassette
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 2 |
| 09***78 | Pin-Spring | 1 |
| 14***08 | Fastener | 13 |
284-8954 Radio Gp -Am/Fm/Wb/Xm/ Cd Player
| 1D***77 | Bolt-Round Head; (3/8-16x1-In) | 2 |
| 28***54 | Radio Group; -Am/Fm/Wb/Xm/ Cd Player | 1 |
| 5T***69 | Clamp | 2 |
233-3123 Radio Gp -Am/Fm/Wb
| 09***25 | Pin-Clevis | 1 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 2 |
| 15***82 | Spring-Gas; (Non-Locking) | 1 |
331-5291 Radio Gp -Am/Fm/Wb/Cd Player
| 25***85 | Window Group-Cab; -Side, Lh | 1 |
| 25***86 | Window Group-Cab; -Side, Rh | 1 |
| 27***42 | Screw-Truss Head; (M6x1x20-mm) | 18 |
284-8955 Radio Gp -Am/Fm/Wb/Sirius/ Cd Player
| 25***83 | Window As; (Lh Front Sliding Glass) | 1 |
| 25***84 | Window As; (Lh Rear Sliding Glass) | 1 |
| 25***65 | Latch As | 1 |
258-4403 Seat & Armrest Gp -Static
| 25***03 | Seat & Armrest Group; -Static | 1 |
| 29***10 | Film-Identification; (Two Speed) | 2 |
258-4401 Seat & Armrest Gp
| 25***11 | Film-Identification; (256c, Lh) | 1 |
| 25***12 | Film-Identification; (256c, Rh) | 1 |
| 25***23 | Film-Identification; (Caterpillar) | 1 |
258-4402 Seat & Armrest Gp -Suspension
| 25***31 | Film-Identification; (High Flow Xps) | 2 |
| 25***02 | Seat & Armrest Group; -Suspension | 1 |
258-4052 Seat & Mounting Gp
| 15***53 | Film-Information; (Read Omm) | 1 |
| 16***76 | Film; (Identification) (12v) (On Rear Console Behind Operators Seat) | 1 |
| 21***02 | Film-Warning; (No Weld, No Drill, Read Omm) | 1 |
258-4050 Seat & Mounting Gp -Static
| 12***59 | Clamp-Hose | 2 |
| 12***71 | Clamp-Hose | 1 |
| 18***07 | Clamp-Hose | 1 |
258-4051 Seat & Mounting Gp -Suspension
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 15***35 | Film-Warning; (Crush Hazard, Stay Back) | 1 |
| 22***42 | Film-Warning; (Crush Hazard, Stay Back, U.S.) | 2 |
258-4310 Seat Ar -Static
| 15***53 | Film-Information; (Read Omm) | 1 |
| 16***76 | Film; (Identification) (12v) (On Rear Console Behind Operators Seat) | 1 |
| 21***02 | Film-Warning; (No Weld, No Drill, Read Omm) | 1 |
258-4330 Seat Ar-Suspension -Air
| 15***53 | Film-Information; (Read Omm) | 1 |
| 16***76 | Film; (Identification) (12v) (On Rear Console Behind Operators Seat) | 1 |
| 21***02 | Film-Warning; (No Weld, No Drill, Read Omm) | 1 |
258-4320 Seat Ar-Suspension -Mechanical
| 15***53 | Film-Information; (Read Omm) | 1 |
| 16***76 | Film; (Identification) (12v) (On Rear Console Behind Operators Seat) | 1 |
| 21***02 | Film-Warning; (No Weld, No Drill, Read Omm) | 1 |
258-4095 Seat Belt Gp -Retractable
| 16***89 | Tack-Fastener | 4 |
| 22***69 | Film-Warning; (Do Not Operate, Read Omm) | 1 |
| 24***18 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
258-4096 Seat Belt Gp -Retractable
| 19***10 | Film-Identification; (Synthetic Hydraulic Oil, Read Omm) | 2 |
| 25***96 | Seat Belt Group; -Retractable | 1 |
273-5913 Seat Gp -Cloth, Suspension
| 27***13 | Seat Group; -Cloth, Suspension | 1 |
258-4053 Seat Gp -Static
| 25***53 | Seat Group; -Static | 1 |
305-7096 Seat Gp -Vinyl
| 30***96 | Seat Group; -Vinyl | 1 |
258-4054 Seat Gp-Suspension -Mechanical
| 25***54 | Seat Group-Suspension; -Mechanical | 1 |
258-4055 Seat Gp-Suspension -Air
| 25***55 | Seat Group-Suspension; -Air | 1 |
258-4017 Spring Gp-Gas -Includes Lift Handle
| 25***17 | Spring Group-Gas; -Includes Lift Handle | 1 |
273-9611 Suspension Gp-Seat -Mechanical
| 27***11 | Suspension Group-Seat; -Mechanical | 1 |
273-5914 Suspension Gp-Seat -Air
| 27***14 | Suspension Group-Seat; -Air | 1 |
258-4233 Visor Gp-Cab -Lh
| 25***33 | Visor Group-Cab; -Lh | 1 |
258-3497 Visor Gp-Cab
| 25***97 | Visor Group-Cab | 1 |
258-4010 Window Gp-Cab
| 25***10 | Window Group-Cab | 1 |
258-3286 Window Gp-Cab -Side, Rh
| 25***86 | Window Group-Cab; -Side, Rh | 1 |
258-3285 Window Gp-Cab -Side, Lh
| 25***85 | Window Group-Cab; -Side, Lh | 1 |
258-4090 Window Gp-Cab -Side
| 25***90 | Window Group-Cab; -Side | 1 |
Power Train
258-2957 Axle Gp -Heavy-Duty
| 10***66 | Bolt; (Self Locking) (M16x2x40mm) | 4 |
| 14***36 | Nut; (9/16-18-Thd) | 32 |
| 15***57 | Washer; (15.5x32x8-mm Thk) | 32 |
258-3737 Axle Gp -Heavy-Duty
| 13***04 | Switch As-Pressure; (Power Train Oil Filter Bypass) | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
| 25***37 | Axle Group; -Heavy-Duty | 1 |
258-3736 Axle Gp -Standard
| 14***82 | Elbow As | 2 |
| 17***20 | Strap-Dual Clamp | 1 |
| 19***40 | Connector As | 1 |
258-2857 Axle Gp -Standard
| 10***66 | Bolt; (Self Locking) (M16x2x40mm) | 4 |
| 14***33 | Retainer | 2 |
| 14***36 | Nut; (9/16-18-Thd) | 32 |
258-2860 Drive Gp-Tandem
| 10***21 | Connector | 1 |
| 14***39 | Connector As. | 3 |
| 14***58 | Elbow As | 1 |
258-2862 Drive Gp-Tandem
| 10***21 | Connector | 1 |
| 14***27 | Connector Group | 3 |
| 14***39 | Connector As. | 3 |
300-7627 Drive Gp-Tandem
| 14***27 | Connector Group | 2 |
| 14***39 | Connector As. | 4 |
| 14***45 | Connector As | 2 |
258-2581 Filter & Lines Gp-Hydraulic
| 09***32 | Spacer; (13.5x22x14-mm Thk) | 2 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 2 |
| 17***87 | Connector As | 1 |
223-9974 Filter Gp-Oil -Hydraulic
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***18 | Connector As | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
258-2431 Lines Gp-Hydrostatic
| 10***93 | Poppet | 1 |
| 14***27 | Connector Group | 2 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 1 |
258-2430 Lines Gp-Hydrostatic
| 10***93 | Poppet | 1 |
| 14***27 | Connector Group | 2 |
| 14***62 | Elbow Group | 1 |
258-2607 Lines Gp-Parking Brake
| 17***05 | Bolt-Socket Head; (M8x1.25x12-mm) | 2 |
| 25***05 | Motor Group-Piston | 2 |
| 25***07 | Lines Group-Parking Brake | 1 |
258-3151 Manifold & Lines Gp-Control -Motor, 2-Speed
| 25***51 | Manifold & Lines Group-Control; -Motor, 2-Speed | 1 |
| 28***38 | Kit-Bearing; (Piston Motor) | 1 |
| 28***39 | Stud | 6 |
258-2589 Manifold Gp-Return
| 25***89 | Manifold Group-Return | 1 |
| 28***38 | Kit-Bearing; (Piston Motor) | 1 |
| 28***39 | Stud | 6 |
258-2408 Motor & Mtg Gp-Hydrostatic
| 22***35 | Flange | 1 |
| 25***08 | Motor & Mtg Group-Hydrostatic | 1 |
| 25***19 | Plate-Adapter | 1 |
258-2409 Motor & Mtg Gp-Hydrostatic
| 25***08 | Motor & Mtg Group-Hydrostatic | 1 |
| 25***09 | Motor & Mtg Group-Hydrostatic | 1 |
| 25***30 | Lines Group-Hydrostatic | 1 |
258-2416 Motor & Mtg Gp-Hydrostatic
| 25***09 | Motor & Mtg Group-Hydrostatic | 1 |
| 25***16 | Motor & Mtg Group-Hydrostatic | 1 |
| 25***31 | Lines Group-Hydrostatic | 1 |
258-2605 Motor Gp-Piston
| 25***05 | Motor Group-Piston | 1 |
| 27***35 | Kit-Cylinder Block | 2 |
| 27***36 | Kit-Seal; (Piston Pump) | 1 |
258-2521 Motor Gp-Piston -2-Speed, Rh
| 09***94 | Ring-Retaining | 1 |
| 16***42 | Washer-Hard; (14.8x27x3-mm Thk) | 2 |
| 16***39 | Bolt; (M14x2x40-mm) | 2 |
258-2442 Motor Gp-Piston
| 25***16 | Motor & Mtg Group-Hydrostatic | 1 |
| 25***30 | Lines Group-Hydrostatic | 1 |
| 25***42 | Motor Group-Piston | 1 |
258-2520 Motor Gp-Piston -2-Speed, Lh
| 09***94 | Ring-Retaining | 1 |
| 16***42 | Washer-Hard; (14.8x27x3-mm Thk) | 2 |
| 16***39 | Bolt; (M14x2x40-mm) | 2 |
258-3318 Mounting Gp-Pump
| 25***18 | Mounting Group-Pump | 1 |
| 27***36 | Kit-Seal; (Piston Pump) | 1 |
| 27***37 | Valve Group-Pump Control | 2 |
258-3400 Power Train Ar -2-Speed
| 14***26 | Tire; (12-R16.5) | 1 |
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
300-7637 Power Train Ar -Extreme Service Power Train
| 14***26 | Tire; (12-R16.5) | 1 |
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
258-3200 Power Train Ar
| 14***26 | Tire; (12-R16.5) | 1 |
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
300-7640 Pump & Mtg Gp-Hydrostatic
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 15***82 | Tire; (12-R16.5) | 1 |
258-2406 Pump & Mtg Gp-Hydrostatic
| 14***26 | Tire; (12-R16.5) | 1 |
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
289-6362 Pump Gp-Piston -Hydrostatic
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 15***82 | Tire; (12-R16.5) | 1 |
258-2404 Pump Gp-Piston -Hydrostatic
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 15***82 | Tire; (12-R16.5) | 1 |
165-4906 Tire & Rim Gp -Heavy-Duty, Lh
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 16***06 | Tire & Rim Group; -Heavy-Duty, Lh | 1 |
185-8676 Tire & Rim Gp -Lh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***76 | Tire & Rim Group; -Lh | 1 |
265-2900 Tire & Rim Gp -Lh
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 16***01 | Tire & Rim Group; -Heavy-Duty, Lh | 2 |
| 16***02 | Tire & Rim Group; -Heavy-Duty, Rh | 2 |
142-8738 Tire & Rim Gp -Lh
| 14***31 | Wheel As | 1 |
| 14***38 | Tire & Rim Group; -Lh | 1 |
| 15***99 | Valve As-Tire | 1 |
228-9221 Tire & Rim Gp
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 15***78 | Tire & Rim Group; -Lh | 2 |
| 15***79 | Tire & Rim Group; -Rh | 2 |
185-8674 Tire & Rim Gp -Lh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***74 | Tire & Rim Group; -Lh | 1 |
142-8737 Tire & Rim Gp -Rh
| 14***31 | Wheel As | 1 |
| 14***37 | Tire & Rim Group; -Rh | 1 |
| 15***99 | Valve As-Tire | 1 |
188-0125 Tire & Rim Gp -Rh
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***25 | Tire & Rim Group; -Rh | 1 |
154-3979 Tire & Rim Gp -Rh
| 15***99 | Valve As-Tire | 1 |
| 15***79 | Tire & Rim Group; -Rh | 1 |
| 18***35 | Tire; (305-546) | 1 |
265-2901 Tire & Rim Gp -Rh
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 16***06 | Tire & Rim Group; -Heavy-Duty, Lh | 2 |
| 16***07 | Tire & Rim Group; -Heavy-Duty, Rh | 2 |
165-4902 Tire & Rim Gp -Heavy-Duty, Rh
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 16***02 | Tire & Rim Group; -Heavy-Duty, Rh | 1 |
199-5439 Tire & Rim Gp -Rh
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 14***28 | Tire & Rim Group; -Lh | 2 |
| 14***37 | Tire & Rim Group; -Rh | 2 |
165-4907 Tire & Rim Gp -Heavy-Duty, Rh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 16***07 | Tire & Rim Group; -Heavy-Duty, Rh | 1 |
142-9025 Tire & Rim Gp -Rh
| 14***59 | Wheel As | 1 |
| 14***25 | Tire & Rim Group; -Rh | 1 |
| 15***99 | Valve As-Tire | 1 |
154-3980 Tire & Rim Gp -Lh
| 15***99 | Valve As-Tire | 1 |
| 15***80 | Tire & Rim Group; -Lh | 1 |
| 18***35 | Tire; (305-546) | 1 |
185-9930 Tire & Rim Gp -Lh
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***30 | Tire & Rim Group; -Lh | 1 |
165-4901 Tire & Rim Gp -Heavy-Duty, Lh
| 15***99 | Valve As-Tire | 1 |
| 16***01 | Tire & Rim Group; -Heavy-Duty, Lh | 1 |
| 18***35 | Tire; (305-546) | 1 |
185-9929 Tire & Rim Gp -Rh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***29 | Tire & Rim Group; -Rh | 1 |
188-0124 Tire & Rim Gp -Lh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***24 | Tire & Rim Group; -Lh | 1 |
265-2898 Tire & Rim Gp -Lh
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 15***80 | Tire & Rim Group; -Lh | 2 |
| 15***81 | Tire & Rim Group; -Rh | 2 |
185-8677 Tire & Rim Gp -Rh
| 15***99 | Valve As-Tire | 1 |
| 17***70 | Wheel As | 1 |
| 18***77 | Tire & Rim Group; -Rh | 1 |
142-8728 Tire & Rim Gp -Lh
| 14***28 | Tire & Rim Group; -Lh | 1 |
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
185-8675 Tire & Rim Gp -Rh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***75 | Tire & Rim Group; -Rh | 1 |
185-9928 Tire & Rim Gp -Lh
| 15***99 | Valve As-Tire | 1 |
| 17***70 | Wheel As | 1 |
| 18***28 | Tire & Rim Group; -Lh | 1 |
199-5438 Tire & Rim Gp -Lh
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 19***38 | Tire & Rim Group; -Lh | 1 |
185-9931 Tire & Rim Gp -Rh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***31 | Tire & Rim Group; -Rh | 1 |
228-9220 Tire & Rim Gp
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 14***38 | Tire & Rim Group; -Lh | 2 |
| 14***25 | Tire & Rim Group; -Rh | 2 |
154-3981 Tire & Rim Gp -Rh
| 15***99 | Valve As-Tire | 1 |
| 15***81 | Tire & Rim Group; -Rh | 1 |
| 18***35 | Tire; (305-546) | 1 |
265-2899 Tire & Rim Gp -Rh
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***30 | Tire-Solid; (33x6x8) | 4 |
| 26***99 | Tire & Rim Group; -Rh | 1 |
154-3978 Tire & Rim Gp -Lh
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 15***78 | Tire & Rim Group; -Lh | 1 |
165-4898 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 16***98 | Wheel & Tire Ar; -Heavy Duty | 1 |
| 18***24 | Tire & Rim Group; -Lh | 2 |
228-9217 Wheel & Tire Ar
| 22***17 | Wheel & Tire Ar | 1 |
| 31***28 | Tire; (33x6x10) | 4 |
142-7495 Wheel & Tire Ar -Pneumatic
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 14***95 | Wheel & Tire Ar; -Pneumatic | 1 |
| 18***74 | Tire & Rim Group; -Lh | 2 |
154-3972 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 15***72 | Wheel & Tire Ar; -Heavy Duty | 1 |
| 18***76 | Tire & Rim Group; -Lh | 2 |
154-3973 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 15***73 | Wheel & Tire Ar; -Heavy Duty | 1 |
| 18***28 | Tire & Rim Group; -Lh | 2 |
185-8662 Wheel & Tire Ar -Low Side Wall
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***62 | Wheel & Tire Ar; -Low Side Wall | 1 |
| 26***98 | Tire & Rim Group; -Lh | 2 |
185-8666 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***66 | Wheel & Tire Ar; -Heavy Duty | 1 |
| 22***34 | Tire-Solid; (33x6x11)(Rh) | 2 |
187-3239 Wheel & Tire Ar
| 18***39 | Wheel & Tire Ar | 1 |
| 22***34 | Tire-Solid; (33x6x11)(Rh) | 2 |
| 22***35 | Tire-Solid; (33x6x11)(Rh) | 2 |
252-0366 Wheel & Tire Ar -Solid
| 17***16 | Chock | 1 |
| 25***66 | Wheel & Tire Ar; -Solid | 1 |
| 25***33 | Film-Notice; (Steering) | 1 |
252-0346 Wheel & Tire Ar
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 25***46 | Wheel & Tire Ar | 1 |
178-2256 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 17***56 | Wheel & Tire Ar; -Heavy Duty | 1 |
| 22***21 | Tire & Rim Group | 4 |
165-4903 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 16***03 | Wheel & Tire Ar; -Heavy Duty | 1 |
| 22***20 | Tire & Rim Group | 4 |
159-5761 Wheel & Tire Ar -Solid
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 15***61 | Wheel & Tire Ar; -Solid | 1 |
| 18***30 | Tire & Rim Group; -Lh | 2 |
185-8663 Wheel & Tire Ar -Low Side Wall
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***63 | Wheel & Tire Ar; -Low Side Wall | 1 |
| 26***00 | Tire & Rim Group; -Lh | 2 |
252-0347 Wheel & Tire Ar
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 25***47 | Wheel & Tire Ar | 1 |
185-8667 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***67 | Wheel & Tire Ar; -Heavy Duty | 1 |
| 22***34 | Tire-Solid; (33x6x11)(Rh) | 2 |
228-9219 Wheel & Tire Ar
| 22***19 | Wheel & Tire Ar | 1 |
| 25***62 | Muffler & Mounting Group | 1 |
| 25***79 | Motor & Mtg Group-Hydraulic Fan | 1 |
252-0377 Wheel & Tire Ar -Solid
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 12***54 | Fastener; (Loop) (22cm) (X3) | 0 |
142-7494 Wheel & Tire Ar -Pneumatic
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 14***94 | Wheel & Tire Ar; -Pneumatic | 1 |
| 19***38 | Tire & Rim Group; -Lh | 2 |
259-9892 Wheel & Tire Gp
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***54 | Fastener; (Loop) (22cm) (X3) | 0 |
| 12***55 | Fastener-Hook; (18-cm Each) | 0 |
317-0691 Wheel & Tire Gp
| 31***41 | Counterweight | 4 |
| 31***91 | Wheel & Tire Group | 1 |
| 7X***49 | Bolt (M12x1.75x100mm); (M12x1.75x100-mm) | 4 |
Service Equipment And Supplies
280-8329 Bracket Gp-Mounting -Belt Guard
| 28***29 | Bracket Group-Mounting; -Belt Guard | 1 |
238-7734 Film Gp -Un
| 23***34 | Film Group; -Un | 1 |
289-0848 Film Gp -2-Speed
258-3230 Film Gp -High Flow Xps
| 25***30 | Film Group; -High Flow Xps | 1 |
258-3191 Film Gp -256c
| 25***91 | Film Group; -256c | 1 |
348-6735 Kit-Muffler
258-3221 Plate & Film Gp
| 25***21 | Plate & Film Group | 1 |
286-9251 Plate & Film Gp
| 28***51 | Plate & Film Group | 1 |
247-0678 Plate & Film Gp
| 24***78 | Plate & Film Group | 1 |
258-3225 Plate & Film Gp
| 25***25 | Plate & Film Group | 1 |
304-5237 Plate & Film Gp
| 30***37 | Plate & Film Group | 1 |
Work Tools
216-8756 Arm Gp-Material Handling
| 19***16 | Edge | 1 |
| 21***56 | Arm Group-Material Handling | 1 |
177-1990 Blade Ar -Angling
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 17***90 | Blade Ar; -Angling | 1 |
177-1989 Blade Ar -Angling
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 17***89 | Blade Ar; -Angling | 1 |
231-5275 Blade Ar -Angling
| 15***37 | Edge | 1 |
| 23***75 | Blade Ar; -Angling | 1 |
| 32***34 | Guard As; (60-In) | 1 |
231-5277 Blade Ar -Angling
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 23***77 | Blade Ar; -Angling | 1 |
230-4596 Blade As-Angling
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 23***96 | Blade As-Angling | 1 |
222-7412 Blade As-Angling
| 15***77 | Edge | 1 |
| 22***12 | Blade As-Angling | 1 |
| 32***54 | Guard As; (72-In) | 1 |
177-1988 Blade As-Angling
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 17***88 | Blade As-Angling | 1 |
177-1987 Blade As-Angling
| 15***59 | Edge | 1 |
| 17***87 | Blade As-Angling | 1 |
| 32***44 | Guard As; (66-In) | 1 |
177-1981 Blade Gp-Angling
| 17***81 | Blade Group-Angling | 1 |
| 19***16 | Edge | 1 |
| 32***64 | Guard As; (78-In) | 1 |
231-5276 Blade Gp-Angling
| 13***87 | Edge Group-Cutting | 1 |
| 23***76 | Blade Group-Angling | 1 |
| 26***84 | Bucket Group-Dirt | 1 |
222-7724 Blade Gp-Angling
| 22***24 | Blade Group-Angling | 1 |
| 29***44 | Edge | 1 |
| 32***74 | Guard As; (84-In) | 1 |
177-1982 Blade Gp-Angling
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 17***82 | Blade Group-Angling | 1 |
325-7059 Blade Gp-Multipurpose Bucket
| 13***85 | Edge Group-Cutting | 1 |
| 15***24 | Bucket Ar-Grapple | 1 |
| 32***59 | Blade Group-Multipurpose Bucket | 1 |
325-7049 Blade Gp-Multipurpose Bucket
| 15***86 | Bucket Group-Grapple; -Industrial | 1 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***87 | Lines Group-Grapple; -Industrial | 1 |
325-7038 Blade Gp-Multipurpose Bucket
| 19***24 | Edge Group-Cutting | 1 |
| 29***70 | Bucket As-General Purpose; -High Capacity | 1 |
| 32***38 | Blade Group-Multipurpose Bucket, Protective Cover | 1 |
293-0142 Blade Gp-Multipurpose Bucket
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 9 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
159-5345 Blade Gp-Multipurpose Bucket
| 13***84 | Edge Group-Cutting | 1 |
| 15***45 | Blade Group-Multipurpose Bucket | 1 |
| 27***37 | Bucket As-Dirt | 1 |
159-5347 Blade Gp-Multipurpose Bucket
| 13***85 | Edge Group-Cutting | 1 |
| 15***47 | Blade Group-Multipurpose Bucket | 1 |
| 27***40 | Bucket As-Dirt | 1 |
279-5384 Blade Gp-Multipurpose Bucket
| 13***86 | Edge Group-Cutting | 1 |
| 27***84 | Blade Group-Multipurpose Bucket | 1 |
| 28***89 | Bucket As-Dirt | 1 |
279-5387 Blade Gp-Multipurpose Bucket
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
325-7039 Blade Gp-Multipurpose Bucket
| 15***84 | Bucket Group-Grapple; -Industrial | 1 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***87 | Lines Group-Grapple; -Industrial | 1 |
279-5388 Blade Gp-Multipurpose Bucket
| 13***85 | Edge Group-Cutting | 1 |
| 27***68 | Bucket As-General Purpose | 1 |
| 27***88 | Blade Group-Multipurpose Bucket | 1 |
325-7048 Blade Gp-Multipurpose Bucket
| 15***85 | Bucket Group-Grapple; -Industrial | 1 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***87 | Lines Group-Grapple; -Industrial | 1 |
279-5385 Blade Gp-Multipurpose Bucket
| 13***84 | Edge Group-Cutting | 1 |
| 27***64 | Bucket As-General Purpose | 1 |
| 27***85 | Blade Group-Multipurpose Bucket | 1 |
325-7069 Blade Gp-Multipurpose Bucket
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***87 | Lines Group-Grapple; -Industrial | 1 |
| 21***28 | Bucket Group-Grapple | 1 |
325-7068 Blade Gp-Multipurpose Bucket
| 13***86 | Edge Group-Cutting | 1 |
| 15***25 | Bucket Ar-Grapple; -Industrial | 1 |
| 32***68 | Blade Group-Multipurpose Bucket | 1 |
325-7058 Blade Gp-Multipurpose Bucket
| 13***84 | Edge Group-Cutting | 1 |
| 15***23 | Bucket Ar-Grapple | 1 |
| 32***58 | Blade Group-Multipurpose Bucket | 1 |
325-7078 Blade Gp-Multipurpose Bucket
| 13***87 | Edge Group-Cutting | 1 |
| 21***29 | Bucket Ar-Grapple | 1 |
| 32***78 | Blade Group-Multipurpose Bucket | 1 |
279-5396 Blade Gp-Multipurpose Bucket
| 13***86 | Edge Group-Cutting | 1 |
| 27***72 | Bucket As-General Purpose | 1 |
| 27***96 | Blade Group-Multipurpose Bucket | 1 |
154-5080 Blade Gp-Multipurpose Bucket
| 13***83 | Edge Group-Cutting | 1 |
| 15***80 | Blade Group-Multipurpose Bucket | 1 |
| 27***34 | Bucket As-Dirt | 1 |
279-5395 Blade Gp-Multipurpose Bucket
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
325-7079 Blade Gp-Multipurpose Bucket
| 28***99 | Bucket Group-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
| 32***79 | Blade Group-Multipurpose Bucket | 1 |
279-5406 Blade Gp-Multipurpose Bucket
| 13***87 | Edge Group-Cutting | 1 |
| 27***76 | Bucket As-General Purpose | 1 |
| 27***06 | Blade Group-Multipurpose Bucket | 1 |
279-5405 Blade Gp-Multipurpose Bucket
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
279-5441 Bucket Ar-Dirt
| 27***41 | Bucket Ar-Dirt | 1 |
| 28***48 | Mounting Group-Cylinder; -Grapple Bucket | 1 |
| 28***51 | Plate & Film Group | 1 |
279-5435 Bucket Ar-Dirt
| 27***35 | Bucket Ar-Dirt | 1 |
| 28***00 | Bucket Ar-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
285-6090 Bucket Ar-Dirt
| 28***90 | Bucket Ar-Dirt, Turbocharger | 1 |
| 28***44 | Bucket Group-Grapple | 1 |
| 28***48 | Mounting Group-Cylinder; -Grapple Bucket | 1 |
279-5438 Bucket Ar-Dirt
| 27***38 | Bucket Ar-Dirt | 1 |
| 28***01 | Bucket Ar-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
268-4083 Bucket Ar-Dirt
| 26***83 | Bucket Ar-Dirt | 1 |
| 28***02 | Bucket Group-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
279-5370 Bucket Ar-General Purpose
| 27***70 | Bucket Ar-General Purpose | 1 |
| 29***23 | Bucket As-Light Material, Wheel Disc | 1 |
| 29***80 | Edge Group-Cutting | 1 |
296-8192 Bucket Ar-General Purpose
| 13***84 | Edge Group-Cutting | 1 |
| 27***82 | Bucket Ar-Multipurpose | 1 |
| 29***92 | Bucket Ar-General Purpose | 1 |
279-5373 Bucket Ar-General Purpose
| 15***05 | Bucket Group-Multipurpose | 1 |
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
279-5377 Bucket Ar-General Purpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 15***04 | Bucket Ar-Multipurpose | 1 |
279-5369 Bucket Ar-General Purpose
| 19***24 | Edge Group-Cutting | 1 |
| 27***69 | Bucket Ar-General Purpose | 1 |
| 27***29 | Bucket As-Light Material | 1 |
279-5366 Bucket Ar-General Purpose
| 13***87 | Edge Group-Cutting | 1 |
| 27***66 | Bucket Ar-General Purpose | 1 |
| 27***24 | Bucket As-Light Material | 1 |
279-5365 Bucket Ar-General Purpose
| 13***86 | Edge Group-Cutting | 1 |
| 27***65 | Bucket Ar-General Purpose | 1 |
| 27***21 | Bucket As-Light Material | 1 |
279-5378 Bucket Ar-General Purpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
279-5374 Bucket Ar-General Purpose
| 15***09 | Bucket Group-Multipurpose | 1 |
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
217-6229 Bucket Ar-Grapple
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 21***29 | Bucket Ar-Grapple | 1 |
285-6111 Bucket Ar-Grapple
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
| 16***36 | Cover Group-Lines | 1 |
285-6112 Bucket Ar-Grapple
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 9 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
217-6230 Bucket Ar-Grapple
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 9 |
| 21***30 | Bucket Ar-Grapple | 1 |
158-6095 Bucket Ar-Grapple
| 13***86 | Edge Group-Cutting | 1 |
| 15***95 | Bucket Ar-Grapple; -Industrial | 1 |
| 27***98 | Bucket Ar-Multipurpose | 1 |
157-7227 Bucket Ar-Grapple
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
| 15***27 | Bucket Ar-Grapple; -Industrial | 1 |
285-6093 Bucket Ar-Grapple
| 13***87 | Edge Group-Cutting | 1 |
| 27***03 | Bucket Ar-Multipurpose | 1 |
| 28***93 | Bucket Ar-Grapple | 1 |
157-7223 Bucket Ar-Grapple
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
| 15***23 | Bucket Ar-Grapple | 1 |
157-7225 Bucket Ar-Grapple -Industrial
| 13***85 | Edge Group-Cutting | 1 |
| 15***25 | Bucket Ar-Grapple; -Industrial | 1 |
| 27***90 | Bucket Ar-Multipurpose | 1 |
285-6104 Bucket Ar-Grapple
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
| 16***36 | Cover Group-Lines | 1 |
286-9300 Bucket Ar-Grapple
| 19***24 | Edge Group-Cutting | 1 |
| 28***00 | Bucket Ar-Grapple | 1 |
| 29***39 | Engine; - Assembly, Bucket Ar-Multipurpose | 1 |
157-7224 Bucket Ar-Grapple
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
| 15***24 | Bucket Ar-Grapple | 1 |
286-9301 Bucket Ar-Grapple
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
157-7226 Bucket Ar-Grapple
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 15***26 | Bucket Ar-Grapple; -Industrial | 1 |
279-5420 Bucket Ar-Light Material
| 15***11 | Mounting Group-Cylinder | 1 |
| 16***36 | Cover Group-Lines | 1 |
| 27***69 | Cylinder Group-Hydraulic | 2 |
296-7597 Bucket Ar-Light Material
| 15***11 | Mounting Group-Cylinder | 1 |
| 16***36 | Cover Group-Lines | 1 |
| 27***69 | Cylinder Group-Hydraulic | 2 |
279-5425 Bucket Ar-Light Material
| 13***84 | Edge Group-Cutting | 1 |
| 27***25 | Bucket Ar-Light Material | 1 |
| 32***36 | Bucket Ar-Multipurpose, Protective Cover | 1 |
279-5430 Bucket Ar-Light Material
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
325-7050 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***36 | Bucket As-Dirt | 1 |
279-5390 Bucket Ar-Multipurpose
| 13***87 | Edge Group-Cutting | 1 |
| 27***90 | Bucket Ar-Multipurpose | 1 |
| 32***66 | Bucket Ar-Multipurpose | 1 |
154-5010 Bucket Ar-Multipurpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 15***10 | Bucket Ar-Multipurpose | 1 |
325-7066 Bucket Ar-Multipurpose
| 14***35 | Edge | 1 |
| 32***66 | Bucket Ar-Multipurpose | 1 |
325-7036 Bucket Ar-Multipurpose
| 19***22 | Edge | 1 |
| 32***36 | Bucket Ar-Multipurpose, Protective Cover | 1 |
325-7065 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 28***88 | Bucket As-Dirt | 1 |
296-8055 Bucket Ar-Multipurpose
| 14***04 | Bucket As-Dirt | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
325-7080 Bucket Ar-Multipurpose
| 14***37 | Edge | 1 |
| 32***80 | Bucket Ar-Multipurpose | 1 |
325-7075 Bucket Ar-Multipurpose
| 14***36 | Edge | 1 |
| 32***75 | Bucket Ar-Multipurpose | 1 |
279-5403 Bucket Ar-Multipurpose
| 14***35 | Edge | 1 |
| 27***03 | Bucket Ar-Multipurpose | 1 |
154-5004 Bucket Ar-Multipurpose
| 13***85 | Edge Group-Cutting | 1 |
| 15***04 | Bucket Ar-Multipurpose | 1 |
| 32***46 | Bucket Ar-Multipurpose | 1 |
325-7040 Bucket Ar-Multipurpose
| 14***34 | Edge | 1 |
| 32***40 | Bucket Ar-Multipurpose | 1 |
325-7045 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***33 | Bucket As-Dirt | 1 |
279-5391 Bucket Ar-Multipurpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 9 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
325-7060 Bucket Ar-Multipurpose
| 14***37 | Edge | 1 |
| 32***60 | Bucket Ar-Multipurpose | 1 |
279-5380 Bucket Ar-Multipurpose
| 13***86 | Edge Group-Cutting | 1 |
| 27***80 | Bucket Ar-Multipurpose | 1 |
| 32***56 | Bucket Ar-Multipurpose | 1 |
279-5399 Bucket Ar-Multipurpose
| 13***84 | Edge Group-Cutting | 1 |
| 27***99 | Bucket Ar-Multipurpose | 1 |
| 28***96 | Bucket Group-Utility | 1 |
325-7055 Bucket Ar-Multipurpose
| 14***36 | Edge | 1 |
| 32***55 | Bucket Ar-Multipurpose | 1 |
279-5400 Bucket Ar-Multipurpose
| 13***85 | Edge Group-Cutting | 1 |
| 27***00 | Bucket Ar-Multipurpose | 1 |
| 28***99 | Bucket Group-Utility | 1 |
279-5381 Bucket Ar-Multipurpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 9 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
279-5402 Bucket Ar-Multipurpose
| 14***36 | Edge | 1 |
| 27***02 | Bucket Ar-Multipurpose | 1 |
279-5398 Bucket Ar-Multipurpose
| 19***24 | Edge Group-Cutting | 1 |
| 27***98 | Bucket Ar-Multipurpose | 1 |
| 32***76 | Bucket Ar-Multipurpose | 1 |
325-7076 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***67 | Bucket As-General Purpose | 1 |
279-5392 Bucket Ar-Multipurpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 16***36 | Cover Group-Lines | 1 |
| 27***69 | Cylinder Group-Hydraulic | 2 |
279-5401 Bucket Ar-Multipurpose
| 13***86 | Edge Group-Cutting | 1 |
| 27***01 | Bucket Ar-Multipurpose | 1 |
| 28***02 | Bucket Group-Utility | 1 |
279-5382 Bucket Ar-Multipurpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 16***36 | Cover Group-Lines | 1 |
| 27***69 | Cylinder Group-Hydraulic | 2 |
296-8057 Bucket Ar-Multipurpose
| 14***37 | Edge | 1 |
| 29***57 | Bucket Ar-Multipurpose | 1 |
325-7046 Bucket Ar-Multipurpose
| 14***35 | Edge | 1 |
| 32***46 | Bucket Ar-Multipurpose | 1 |
154-5046 Bucket Ar-Multipurpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***46 | Bucket Ar-Multipurpose | 1 |
| 16***36 | Cover Group-Lines | 1 |
325-7070 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***63 | Bucket As-General Purpose | 1 |
325-7056 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***39 | Bucket As-Dirt | 1 |
293-0139 Bucket Ar-Multipurpose
| 15***27 | Bucket As-Dirt | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
325-7035 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 18***16 | Bucket As-Dirt | 1 |
285-6100 Bucket Ar-Utility
| 19***22 | Edge | 1 |
| 28***00 | Bucket Ar-Utility | 1 |
285-6095 Bucket Ar-Utility
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***71 | Bucket As-General Purpose | 1 |
285-6101 Bucket Ar-Utility
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***75 | Bucket As-General Purpose | 1 |
279-5433 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***89 | Bucket As-Grapple | 1 |
| 16***89 | Tack-Fastener | 4 |
285-6089 Bucket As-Dirt
| 22***82 | Edge | 1 |
| 28***89 | Bucket As-Dirt | 1 |
188-3526 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***87 | Bucket As-Grapple; -Industrial | 1 |
| 16***89 | Tack-Fastener | 4 |
165-6157 Bucket As-Dirt
| 14***36 | Edge | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
| 16***57 | Bucket As-Dirt | 1 |
141-6704 Bucket As-Dirt
| 14***04 | Bucket As-Dirt | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
268-4089 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***88 | Bucket As-Grapple | 1 |
| 16***89 | Tack-Fastener | 4 |
165-6156 Bucket As-Dirt
| 14***35 | Edge | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
| 16***56 | Bucket As-Dirt | 1 |
279-5440 Bucket As-Dirt
| 19***22 | Edge | 1 |
| 27***40 | Bucket As-Dirt | 1 |
188-2716 Bucket As-Dirt
| 14***37 | Edge | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
| 18***16 | Bucket As-Dirt | 1 |
279-5434 Bucket As-Dirt
| 16***30 | Plate-Identification; (Cat) | 2 |
| 19***22 | Edge | 1 |
| 27***34 | Bucket As-Dirt | 1 |
279-5436 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 21***26 | Bucket As-Grapple | 1 |
279-5439 Bucket As-Dirt
| 14***37 | Edge | 1 |
| 27***39 | Bucket As-Dirt | 1 |
279-5437 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***22 | Bucket As-Light Material | 1 |
152-0227 Bucket As-Dirt
| 15***27 | Bucket As-Dirt | 1 |
| 22***32 | Edge | 1 |
285-6088 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***23 | Bucket As-Light Material | 1 |
279-5375 Bucket As-General Purpose
| 14***35 | Edge | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
| 27***75 | Bucket As-General Purpose | 1 |
279-5364 Bucket As-General Purpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***64 | Bucket As-General Purpose | 1 |
279-5371 Bucket As-General Purpose
| 11***83 | Boss; (M10x1.5-Thd) | 4 |
| 14***36 | Edge | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
279-5363 Bucket As-General Purpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***63 | Bucket As-General Purpose | 1 |
279-5368 Bucket As-General Purpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***32 | Bucket As-Utility | 1 |
| 16***89 | Tack-Fastener | 4 |
292-9270 Bucket As-General Purpose -High Capacity
| 14***36 | Edge | 1 |
| 29***70 | Bucket As-General Purpose; -High Capacity | 1 |
292-9271 Bucket As-General Purpose
| 14***37 | Edge | 1 |
| 29***71 | Bucket As-General Purpose, Cap | 1 |
279-5367 Bucket As-General Purpose
| 27***67 | Bucket As-General Purpose | 1 |
| 29***57 | Edge | 1 |
279-5372 Bucket As-General Purpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***37 | Bucket As-Utility | 1 |
| 16***89 | Tack-Fastener | 4 |
279-5376 Bucket As-General Purpose
| 14***35 | Edge | 1 |
| 27***76 | Bucket As-General Purpose | 1 |
169-8941 Bucket As-Grapple
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 16***41 | Bucket As-Grapple; -Industrial | 1 |
169-8942 Bucket As-Grapple
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 9 |
| 16***42 | Bucket As-Grapple; -Industrial | 1 |
156-0888 Bucket As-Grapple
| 13***85 | Edge Group-Cutting | 1 |
| 15***88 | Bucket As-Grapple | 1 |
| 16***57 | Bucket As-Dirt | 1 |
217-6227 Bucket As-Grapple
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***43 | Bucket As-Grapple | 1 |
156-0889 Bucket As-Grapple
| 13***86 | Edge Group-Cutting | 1 |
| 15***89 | Bucket As-Grapple | 1 |
| 18***26 | Bucket As-Dirt | 1 |
156-0887 Bucket As-Grapple
| 13***84 | Edge Group-Cutting | 1 |
| 15***87 | Bucket As-Grapple; -Industrial | 1 |
| 16***56 | Bucket As-Dirt | 1 |
217-6226 Bucket As-Grapple
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***42 | Bucket As-Grapple; -Industrial | 1 |
169-8943 Bucket As-Grapple
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***41 | Bucket As-Grapple; -Industrial | 1 |
279-5422 Bucket As-Light Material
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
279-5429 Bucket As-Light Material
| 15***12 | Pin | 2 |
| 15***70 | Clam As-Multipurpose Bucket | 1 |
| 15***47 | Blade Group-Multipurpose Bucket | 1 |
292-9223 Bucket As-Light Material
| 14***32 | Clam As-Multipurpose Bucket | 1 |
| 15***12 | Pin | 2 |
| 27***84 | Blade Group-Multipurpose Bucket | 1 |
292-9224 Bucket As-Light Material
| 15***12 | Pin | 2 |
| 15***53 | Clam As-Multipurpose Bucket | 1 |
| 27***88 | Blade Group-Multipurpose Bucket | 1 |
279-5424 Bucket As-Light Material
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 27***24 | Bucket As-Light Material | 1 |
279-5423 Bucket As-Light Material
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 27***23 | Bucket As-Light Material | 1 |
279-5421 Bucket As-Light Material
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 21***27 | Bucket As-Grapple | 1 |
279-5428 Bucket As-Light Material
| 14***32 | Clam As-Multipurpose Bucket | 1 |
| 15***12 | Pin | 2 |
| 15***45 | Blade Group-Multipurpose Bucket | 1 |
165-8832 Bucket As-Utility
| 15***12 | Pin | 2 |
| 16***32 | Bucket As-Utility | 1 |
| 19***08 | Clam As-Multipurpose Bucket | 1 |
285-6098 Bucket As-Utility
| 15***12 | Pin | 2 |
| 15***70 | Clam As-Multipurpose Bucket | 1 |
| 28***98 | Bucket As-Utility, Fuel Injection Pump; - Assembly | 1 |
165-8746 Bucket As-Utility
| 15***12 | Pin | 2 |
| 15***70 | Clam As-Multipurpose Bucket | 1 |
| 16***46 | Bucket As-Utility | 1 |
165-8835 Bucket As-Utility
| 15***12 | Pin | 2 |
| 16***35 | Bucket As-Utility | 1 |
| 29***42 | Blade Group-Multipurpose Bucket | 1 |
165-8837 Bucket As-Utility
| 14***32 | Clam As-Multipurpose Bucket | 1 |
| 15***12 | Pin | 2 |
| 16***37 | Bucket As-Utility | 1 |
285-6097 Bucket As-Utility
| 15***12 | Pin | 2 |
| 15***53 | Clam As-Multipurpose Bucket | 1 |
| 28***97 | Bucket As-Utility | 1 |
285-6103 Bucket As-Utility
| 15***12 | Pin | 2 |
| 19***08 | Clam As-Multipurpose Bucket | 1 |
| 28***03 | Bucket As-Utility | 1 |
152-0231 Bucket Gp-Dirt
| 15***31 | Bucket Group-Dirt | 1 |
| 15***12 | Pin | 2 |
| 15***38 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
152-0232 Bucket Gp-Dirt
| 15***32 | Bucket Group-Dirt | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
268-4084 Bucket Gp-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 26***84 | Bucket Group-Dirt | 1 |
188-2719 Bucket Gp-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 18***19 | Bucket Group-Dirt | 1 |
296-8191 Bucket Gp-General Purpose
| 19***43 | Fork Group-Pallet | 2 |
| 26***81 | Carriage Group-Fork | 1 |
| 29***91 | Bucket Group-General Purpose | 1 |
286-9244 Bucket Gp-Grapple
| 19***45 | Fork Group-Pallet | 2 |
| 28***44 | Bucket Group-Grapple | 1 |
| 35***71 | Carriage Group-Fork | 1 |
279-5359 Bucket Gp-Grapple -Industrial
| 19***42 | Fork Group-Pallet | 2 |
| 27***59 | Bucket Group-Grapple; -Industrial | 1 |
| 35***71 | Carriage Group-Fork | 1 |
156-0884 Bucket Gp-Grapple
| 15***84 | Bucket Group-Grapple; -Industrial | 1 |
| 19***42 | Fork Group-Pallet | 2 |
| 26***81 | Carriage Group-Fork | 1 |
156-0886 Bucket Gp-Grapple
| 15***86 | Bucket Group-Grapple; -Industrial | 1 |
| 35***71 | Carriage Group-Fork | 6 |
286-9278 Bucket Gp-Grapple
| 15***35 | Plate-Instruction; (Load Capacity) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 25***95 | Step As | 1 |
217-6228 Bucket Gp-Grapple
| 19***43 | Fork Group-Pallet | 2 |
| 21***28 | Bucket Group-Grapple | 1 |
| 35***71 | Carriage Group-Fork | 1 |
156-0885 Bucket Gp-Grapple
| 15***85 | Bucket Group-Grapple; -Industrial | 1 |
| 19***45 | Fork Group-Pallet | 2 |
| 26***81 | Carriage Group-Fork | 1 |
279-5389 Bucket Gp-Multipurpose
| 14***05 | Bearing-Sleeve | 4 |
| 14***36 | Edge | 1 |
| 15***38 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
293-0141 Bucket Gp-Multipurpose
| 14***05 | Bearing-Sleeve | 4 |
| 16***30 | Plate-Identification; (Cat) | 2 |
| 22***32 | Edge | 1 |
325-7047 Bucket Gp-Multipurpose
| 25***00 | Coupler Group-Quick | 1 |
| 28***90 | Fitting Group-Hydraulic; -Manual | 1 |
| 32***47 | Bucket Group-Multipurpose | 1 |
279-5404 Bucket Gp-Multipurpose
| 14***05 | Bearing-Sleeve | 4 |
| 15***38 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
| 16***30 | Plate-Identification; (Cat) | 2 |
325-7057 Bucket Gp-Multipurpose
| 25***24 | Lines Group-Coupler | 1 |
| 25***01 | Coupler Group-Quick | 1 |
| 25***90 | Wiring Group-Quick Coupler | 1 |
325-7067 Bucket Gp-Multipurpose
| 13***79 | Washer; (11x32x3-mm Thk) | 2 |
| 13***51 | Spacer; (11x19x6-mm Thk) | 2 |
| 15***97 | Spring | 2 |
279-5383 Bucket Gp-Multipurpose
| 14***05 | Bearing-Sleeve | 4 |
| 14***35 | Edge | 1 |
| 15***38 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
325-7077 Bucket Gp-Multipurpose
| 20***85 | Pin | 2 |
| 21***62 | Cylinder & Link Group-Coupler; -Lh | 1 |
| 21***63 | Cylinder & Link Group-Coupler; -Rh | 1 |
154-5005 Bucket Gp-Multipurpose
| 15***05 | Bucket Group-Multipurpose | 1 |
| 26***81 | Carriage Group-Fork | 6 |
279-5397 Bucket Gp-Multipurpose
| 14***05 | Bearing-Sleeve | 4 |
| 14***37 | Edge | 1 |
| 15***38 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
154-5009 Bucket Gp-Multipurpose
| 15***09 | Bucket Group-Multipurpose | 1 |
| 15***35 | Plate-Instruction; (Load Capacity) | 1 |
| 16***89 | Tack-Fastener | 4 |
325-7037 Bucket Gp-Multipurpose
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
285-6096 Bucket Gp-Utility
| 16***28 | Plate | 1 |
| 28***96 | Bucket Group-Utility | 1 |
| 5C***53 | Bolt (M6x1.00x16mm); (M6x1x16mm Thk) | 5 |
285-6099 Bucket Gp-Utility
| 19***40 | Cylinder Group-Hydraulic; -Coupler | 1 |
| 19***42 | Pin | 1 |
| 21***57 | Link Group-Coupler | 1 |
285-6102 Bucket Gp-Utility
| 19***40 | Cylinder Group-Hydraulic; -Coupler | 1 |
| 19***42 | Pin | 1 |
| 21***57 | Link Group-Coupler | 1 |
353-1693 Carriage & Fork Ar
| 13***94 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 8 |
| 35***93 | Carriage & Fork Ar | 1 |
353-1697 Carriage & Fork Ar
| 13***97 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 11 |
| 35***97 | Carriage & Fork Ar | 1 |
293-9427 Carriage & Fork Ar
| 14***14 | Edge-Cutting | 1 |
| 29***27 | Carriage & Fork Ar | 1 |
| 3F***08 | Bolt-Plow; (5/8-11x2.25-In) | 10 |
353-1694 Carriage & Fork Ar
| 13***95 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 8 |
| 35***94 | Carriage & Fork Ar | 1 |
293-9428 Carriage & Fork Ar
| 14***88 | Edge-Cutting | 1 |
| 29***28 | Carriage & Fork Ar | 1 |
| 3F***08 | Bolt-Plow; (5/8-11x2.25-In) | 13 |
353-1696 Carriage & Fork Ar
| 13***96 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 11 |
| 35***96 | Carriage & Fork Ar | 1 |
293-9429 Carriage & Fork Ar
| 13***93 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 6 |
| 29***29 | Carriage & Fork Ar | 1 |
261-6681 Carriage Gp-Fork
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 7 |
| 19***24 | Edge-Cutting | 1 |
| 26***81 | Carriage Group-Fork | 1 |
293-9426 Carriage Gp-Fork
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 11 |
| 19***24 | Edge-Cutting | 1 |
| 29***26 | Carriage Group-Fork | 1 |
351-9371 Carriage Gp-Fork
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 13 |
| 29***02 | Edge-Cutting | 1 |
| 35***71 | Carriage Group-Fork | 1 |
293-0148 Clam As-Multipurpose Bucket
| 16***54 | Tine | 1 |
| 29***48 | Clam As-Multipurpose Bucket | 1 |
| 3E***70 | Pin; (Spring) | 1 |
154-5053 Clam As-Multipurpose Bucket
| 15***53 | Clam As-Multipurpose Bucket | 1 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***14 | Fork Group-Grapple; -Industrial | 2 |
199-8308 Clam As-Multipurpose Bucket
| 19***08 | Clam As-Multipurpose Bucket | 1 |
| 28***10 | Fork Group-Grapple | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
149-4232 Clam As-Multipurpose Bucket
| 14***32 | Clam As-Multipurpose Bucket | 1 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***14 | Fork Group-Grapple; -Industrial | 9 |
154-5070 Clam As-Multipurpose Bucket
| 15***70 | Clam As-Multipurpose Bucket | 1 |
| 28***05 | Fork Group-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
296-0582 Conversion Gp-Work Tool -Kit, High Flow
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
258-2791 Coupler Ar-Quick
| 22***29 | Positioner Group-Fork | 1 |
| 25***91 | Coupler Ar-Quick | 1 |
258-2790 Coupler Ar-Quick
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 9 |
| 25***90 | Coupler Ar-Quick | 1 |
258-2500 Coupler Gp-Quick
| 22***29 | Positioner Group-Fork | 1 |
| 25***00 | Coupler Group-Quick | 1 |
258-2501 Coupler Gp-Quick
| 22***29 | Positioner Group-Fork | 1 |
| 25***01 | Coupler Group-Quick | 1 |
162-5236 Cover Gp-Lines
| 16***36 | Cover Group-Lines | 1 |
| 19***43 | Fork Group-Pallet | 12 |
| 22***29 | Positioner Group-Fork | 1 |
215-3962 Cylinder & Link Gp-Coupler -Lh
| 19***42 | Fork Group-Pallet | 12 |
| 21***62 | Cylinder & Link Group-Coupler; -Lh | 1 |
| 22***29 | Positioner Group-Fork | 1 |
215-3963 Cylinder & Link Gp-Coupler -Rh
| 19***45 | Fork Group-Pallet | 12 |
| 21***63 | Cylinder & Link Group-Coupler; -Rh | 1 |
| 22***29 | Positioner Group-Fork | 1 |
222-7546 Edge Gp-Bit & Cutting
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 7 |
| 16***38 | Fork Group-Utility | 1 |
222-7545 Edge Gp-Bit & Cutting
| 16***41 | Tine | 1 |
| 22***45 | Edge Group-Bit & Cutting | 1 |
| 9R***59 | Clip | 1 |
135-9385 Edge Gp-Cutting
| 13***85 | Edge Group-Cutting | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
135-9387 Edge Gp-Cutting
| 13***87 | Edge Group-Cutting | 1 |
| 17***14 | Pin As | 1 |
| 17***55 | Shim; (1-mm Thk) | 1 |
195-7124 Edge Gp-Cutting
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***89 | Tack-Fastener | 4 |
135-9384 Edge Gp-Cutting
| 13***84 | Edge Group-Cutting | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
135-9383 Edge Gp-Cutting
| 13***83 | Edge Group-Cutting | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 9 |
135-9386 Edge Gp-Cutting
| 13***86 | Edge Group-Cutting | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 7 |
149-5741 Edge Gp-Cutting
| 14***41 | Edge Group-Cutting | 1 |
| 17***14 | Pin As | 1 |
| 17***55 | Shim; (1-mm Thk) | 1 |
296-7680 Edge Gp-Cutting
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***89 | Tack-Fastener | 4 |
285-6114 Fork Ar-Grapple -Utility
| 15***11 | Pin | 4 |
| 15***35 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
| 16***43 | Arm As | 1 |
285-6115 Fork Ar-Grapple -Utility
| 19***37 | Plate | 1 |
| 19***45 | Spring | 1 |
| 19***54 | Pin-Spring | 2 |
279-5350 Fork Ar-Grapple -Industrial
| 16***95 | Cylinder Group-Grapple | 1 |
| 16***31 | Mounting Group-Cylinder; -Utility | 1 |
| 16***40 | Grapple Group-Utility | 1 |
279-5360 Fork Ar-Grapple -Industrial
| 16***31 | Mounting Group-Cylinder; -Utility | 1 |
| 16***40 | Grapple Group-Utility | 1 |
| 17***36 | Bolt; (M12x1.75x35-mm) | 4 |
285-6110 Fork Gp-Grapple
| 03***57 | Washer; (13x26x6-mm Thk) | 4 |
| 17***14 | Film-Stripe; (Reflective, Red, White) | 1 |
| 17***15 | Film; (Reflective)(Warning) | 1 |
279-5351 Fork Gp-Grapple -Industrial
| 03***57 | Washer; (13x26x6-mm Thk) | 2 |
| 17***53 | Plate | 2 |
| 18***97 | Plate Group-Roading; -Lh | 1 |
164-9614 Fork Gp-Grapple -Industrial
| 16***14 | Fork Group-Grapple; -Industrial | 1 |
| 19***37 | Plate | 1 |
| 19***45 | Spring | 1 |
195-6942 Fork Gp-Pallet
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 06***51 | Clamp | 4 |
| 10***59 | Spacer; (9x20x39.2-mm Thk) | 1 |
243-0003 Fork Gp-Pallet -Kit
| 16***60 | Pin-Spring | 1 |
| 19***42 | Pin | 1 |
| 24***03 | Fork Group-Pallet; -Kit | 1 |
243-0001 Fork Gp-Pallet -Kit
| 19***45 | Spring | 1 |
| 24***01 | Fork Group-Pallet; -Kit | 1 |
| 30***68 | Pin-Spring | 1 |
195-8545 Fork Gp-Pallet
| 19***37 | Plate | 1 |
| 19***38 | Bracket | 1 |
| 19***54 | Pin-Spring | 2 |
195-6943 Fork Gp-Pallet
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 06***51 | Clamp | 4 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 4 |
243-0002 Fork Gp-Pallet -Kit
| 17***47 | Pin | 1 |
| 24***02 | Fork Group-Pallet; -Kit | 1 |
| 9R***01 | Pin-Cotter | 1 |
165-8736 Fork Gp-Utility
| 16***36 | Fork Group-Utility | 1 |
| 17***14 | Film-Stripe; (Reflective, Red, White) | 1 |
| 17***15 | Film; (Reflective)(Warning) | 1 |
165-8739 Fork Gp-Utility
| 16***39 | Fork Group-Utility | 1 |
| 18***86 | Step As | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
165-8732 Fork Gp-Utility
| 16***32 | Fork Group-Utility | 1 |
| 16***60 | Pin-Spring | 1 |
| 19***42 | Pin | 1 |
165-8737 Fork Gp-Utility
| 16***37 | Fork Group-Utility | 1 |
| 17***14 | Film-Stripe; (Reflective, Red, White) | 1 |
| 17***15 | Film; (Reflective)(Warning) | 1 |
165-8738 Fork Gp-Utility
| 16***38 | Fork Group-Utility | 1 |
| 17***41 | Spring | 4 |
| 17***73 | Plate As | 1 |
285-6105 Fork Gp-Utility
| 28***05 | Fork Group-Utility | 1 |
| 2S***08 | Washer-Retaining; (0.531x3.25x0.438-In Thk) | 2 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 1 |
230-5670 Frame Gp-Blade
| 11***14 | Screen; (Water Tank) | 1 |
| 11***15 | Gasket | 1 |
| 23***70 | Frame Group-Blade | 1 |
279-5352 Frame Gp-Fork -Industrial
| 19***06 | Cap As; (Water Tank) | 1 |
| 19***07 | Fitting-Drain | 1 |
| 27***52 | Frame Group-Fork; -Industrial | 1 |
279-5358 Frame Gp-Fork -Industrial
| 25***27 | Screw-Truss Head; (No 12x17.46-mm) | 4 |
| 25***98 | Holder-Cup | 1 |
| 25***99 | Tray; (Change) | 1 |
285-6116 Grapple & Cylinder Gp-Utility
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
165-8740 Grapple Gp-Utility
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 16***40 | Grapple Group-Utility | 1 |
| 20***45 | Strap-Cable | 2 |
258-2538 Handle & Pin Gp-Coupler -Lh
| 10***74 | Seal-Connector | 3 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
258-2536 Handle & Pin Gp-Coupler -Rh
| 25***68 | Compressor & Mtg Group-Refrig | 1 |
| 25***36 | Handle & Pin Group-Coupler; -Rh | 1 |
| 25***46 | Wiring Group-Heater | 1 |
319-9480 Kit-Roading Plate & Mounting -Bucket
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 22***57 | Switch As-Limit; (Load Control) | 1 |
177-9152 Kit-Roading Plate & Mounting -Bucket
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***31 | Switch-Temperature; (Air Conditioner) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
258-3645 Kit-Water Tank & Mounting
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
| 25***45 | Kit-Water Tank & Mounting | 1 |
346-1833 Kit-Water Tank & Mounting
| 25***66 | Installation Group-Radio | 1 |
| 25***90 | Window Group-Cab; -Side | 1 |
| 25***29 | Accessory Group-Cab | 1 |
215-3957 Link Gp-Coupler
| 21***57 | Link Group-Coupler | 1 |
| 25***10 | Window Group-Cab | 1 |
| 25***20 | Liner Group-Cab | 1 |
258-2537 Lock Gp-Quick Coupler -Lh
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***93 | Lockwasher | 1 |
| 22***96 | Seal-O-Ring | 2 |
258-2535 Lock Gp-Quick Coupler -Rh
| 25***35 | Lock Group-Quick Coupler; -Rh | 1 |
| 27***74 | Cable Group-Control | 1 |
| 29***97 | Handle Group | 1 |
175-4238 Lock Gp-Quick Coupler -Mechanical
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 8T***42 | Rod End-Yoke | 1 |
| 8T***44 | Pin As-Spring | 1 |
184-6097 Plate Gp-Roading -Lh
| 11***15 | Relay As; (12-Volt)(Junction Box) | 1 |
| 18***97 | Plate Group-Roading; -Lh | 1 |
| 25***84 | Bracket As; (Upper Lh) | 1 |
184-6098 Plate Gp-Roading -Rh
| 18***98 | Plate Group-Roading; -Rh | 1 |
| 26***29 | Shroud As | 1 |
| 28***41 | Coil As | 1 |
177-1983 Spring Gp-Blade
| 10***33 | Kit; (Receptacle) (Includes Receptacle As) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***16 | Terminal | 1 |
188-7733 Step Gp-Material Handling Arm
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 2 |
| 10***33 | Kit; (Receptacle) (Includes Receptacle As) | 1 |
| 10***95 | Terminal-Blade; (14-Ga To 18-Ga) | 2 |
173-7407 Stop Gp-Bucket -Utility
| 17***07 | Stop Group-Bucket; -Utility | 1 |
| 25***71 | Switch As; (Temperature Control) | 1 |
| 25***72 | Switch As; (Blower Fan Speed) | 1 |
116-2001 Strainer Gp-Water
| 11***01 | Strainer Group-Water | 1 |
| 26***66 | Control Group-Joystick; -Lh | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
166-2551 Tank Gp-Water
| 16***51 | Tank Group-Water | 1 |
| 26***65 | Control Group-Joystick; -Lh, High Flow | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
141-4999 Tooth Gp-Uni
| 14***99 | Tooth Group-Uni | 1 |
| 26***64 | Control Group-Joystick; -Rh | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
256C serial number reference
The PIN plate sits on the left side at the rear of the machine frame, under the left support arm; on this and other C-series loaders the full PIN is also stamped into the frame on the left side behind the front tire. Read the plate as CAT + model code (0256C) + a single check character + the 3-letter serial prefix (DWS) + a sequential build number, e.g. CAT0256CKDWS00274 is a 256C with serial DWS00274.
| Prefix | Identifies | Notes |
|---|---|---|
| DWS | 256C skid steer loader, full production run (wheeled, including XPS high-flow hydraulics package) | Covers the 256C from the start of production, serial DWS1 and up. Machine runs a 3.3L (201 cu in) turbocharged direct-injection diesel, factory bore/stroke 94mm x 120mm, coded 3044C DIT (marketed as C3.4 DIT), rated about 61 kW (82 hp) net, 63 kW (85 hp) gross. No separate prefix is documented for the XPS high-flow variant; it shares the DWS range. Build years run roughly from 2007 into the early 2010s before the model was superseded. |
Frequently asked questions
What engine does the Caterpillar 256C use?
The 256C runs a Caterpillar 3044C DIT, a 3.3 L (201 cu in) four-cylinder turbocharged diesel rated around 82 hp (61 kW) net power. Later parts documentation badges the same engine platform as the C3.4 DIT under updated naming, but the displacement and hardware are unchanged.
What is the operating weight of the Caterpillar 256C?
Operating weight runs about 3,430-3,480 kg (7,566-7,665 lb) depending on tire choice and hydraulic package, standard flow versus High Flow XPS. Rated operating capacity is around 1,065 kg (2,350 lb), with a tipping load near 2,130 kg (4,700 lb).
What replaced the Caterpillar 256C?
Caterpillar retired the C-Series in favor of the D-Series compact loader line, but no single model carries the 256 number forward. The 246D and 262D bracket the 256C's capacity class and stand as the closest current-production equivalents for buyers replacing one today.
What 256C owners discuss
Why does a 256C jerk or lurch fore-aft once it warms up, like the wheel motors fall out of sync?
This is a recurring complaint on C-series 256C machines: once the machine reaches operating temperature it starts jerking side to side or fore-aft in forward and reverse, making fine control in close quarters difficult. The drive is electro-hydraulic (fly-by-wire), so the likely culprits are joystick control potentiometers, drive solenoids, or control-module calibration drifting as components heat up, not a worn hydrostatic pump or motor. Dealers have acknowledged this as a known issue on C-series units, reportedly addressed in the following generation. Have your dealer verify joystick and drive-servo calibration, and confirm the control software is current, before authorizing pump or motor work.
Why does drive power fade or the machine coast to a stop even with full joystick travel?
Owners describe forward/reverse drive gradually weakening, or the machine slowing to a stop despite the joystick held fully engaged, requiring a return to neutral and re-engagement to move again. Since hydraulics elsewhere on the machine keep working normally, this points to a throttle position sensor fault or a drive-control calibration issue rather than a failing drive pump or wheel motor. Have your dealer run the drive-system calibration/relearn procedure and check sensor readings before replacing hydrostatic components.
Which engine does the 256C actually run, and what wears on it?
The 256C is powered by the Cat 3044C DIT, a four-cylinder turbocharged direct-injection diesel of about 3.3 L (201 cu in) displacement, rated near 63 kW (85 hp) gross and 61 kW (82 hp) net. Caterpillar's parts catalogs also list this same engine family as the C3.4 DIT - it is the same engine under a later naming convention, not a different unit. The turbocharger is the main reported wear point: oil weeping past the turbo seals is commonly traced back to excess crankcase pressure from a restricted breather rather than the turbo itself, and worn turbo components show up as boost loss, lag, or black/blue smoke. Keep the crankcase breather and air filtration clean to protect turbo seal life.
What electrical or sensor faults come up most often on the 256C?
The most reported electrical complaint is a flashing operator warning light paired with the battery/charge light, which points to alternator output failure (worn brushes, a failed diode, or regulator) even when the battery tests fine on its own. Owners confirm this by checking alternator output with a multimeter - a healthy charging system reads roughly 13.5-14.5V at running speed - and by cleaning and tightening battery, starter, and ground connections before condemning the alternator. A second common complaint is a warning light that triggers an automatic speed or power reduction even though the hydraulics feel normal in every other respect; this is usually a logged fault code from a sensor or wiring issue, not a hydraulic problem, and needs the monitor's service mode pulled for codes to diagnose.
What wears out on the drive system and tires over time on a wheeled machine like this?
The 256C is a wheeled skid steer, so there's no track undercarriage to wear - the equivalent wear items are the enclosed drive chains and chain case/sprockets on each side, plus the tires. Chains should be checked for stretch (elongation approaching roughly 3% is a common replace-it threshold) and the chain-case oil level and condition inspected on both sides, since a bad output shaft seal can let chain-case oil and hydraulic fluid cross-contaminate at the final drive. Tires wear unevenly if run at the wrong pressure - overinflation crowns the contact patch and concentrates wear at the center of the tread, while correct inflation spreads wear evenly and holds up better under the constant turning and scrubbing this machine type does.
What hydraulic quirks show up on used 256C units?
Owners of used 256C machines commonly report sluggish auxiliary hydraulic response and a quick-attach lock pin that sticks or drags, usually traced to worn valve seals or spool wear rather than the main pump. A frequent root cause is a failed cylinder rod dust seal letting dirt and moisture past the rod, which scores the seal bore and gradually drops flow and response. Inspecting dust seals and rod surface finish is worth doing on any machine showing slow or inconsistent hydraulic response.
What should I check before buying a used 256C?
Pull fault codes from the electronic monitor/display first - a logged code (speed-reduction or sensor faults) often explains symptoms that look mechanical but aren't. Check hydraulic filter condition, cylinder rod dust seals for damage, and auxiliary hydraulic flow so the machine can actually run the attachments you plan to use. Inspect drive chains for stretch and check chain-case oil level and condition on both sides. Run the machine until fully warmed up and watch for the known C-series jerk in forward/reverse, and check tire wear pattern for signs of chronic over- or under-inflation. Confirm alternator charge output and general wiring condition, since charging-system faults are a recurring complaint on this model. Have your dealer verify any stored fault codes and confirm the drive system has had available software or calibration updates applied before you finalize a purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 256C part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.