Caterpillarmotor grader
Caterpillar 24M
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 24M is a mining-class motor grader built for constructing and maintaining haul roads at large surface mines, well above the size of standard construction graders. It runs a Cat C18 ACERT diesel rated at 397 kW (533 hp) net, driving a powershift transmission with a lockup torque converter and electronic clutch pressure control through tandem-drive rear bogies. Depending on tires, ripper, guarding, and other options, gross operating weight spans roughly 62,700 kg (138,300 lb) in base trim to about 69,300 kg (152,900 lb) at maximum equipped weight, with a typically equipped machine landing near 65,800 kg (145,150 lb). Caterpillar built the 24M from about 2007 into the late 2010s as the direct successor to the 24H (previously powered by a Cat 3412E engine), carrying an all-new M Series cab, joystick controls, and load-sensing hydraulics into the largest grader in the lineup. It was offered with a 7.3 m (24 ft) moldboard, a rear ripper, dual-access platform options, cross-slope grade control, and either Tier 3/Stage IIIA or non-current Tier 2 engine ratings depending on the region of sale.
Against the 24H, the 24M brought a redesigned cab with electro-hydraulic joysticks, an autoshift powershift transmission, a bolt-on modular rear axle, and a standard automatic lubrication system, along with roughly 8-13% better fuel efficiency from ACERT combustion tuning. In 2018 Caterpillar replaced the 24M with the non-suffixed Cat 24, a heavier machine (about 11% more weight) running the larger C27 ACERT engine and a modular driveline built for faster component swaps; that successor is a separate machine and should not be confused with the 24M covered here. Because the 24M was built for a narrow mining customer base over roughly a decade, used units and their circle, drawbar, tandem, and driveline components remain in active demand at mine sites still running haul-road fleets, which keeps parts support and rebuild knowledge for this specific model relevant in the secondary market.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 24M specifications
Engine
| Engine model | Cat C18 ACERT, 6-cylinder diesel |
| Gross/net power | 397 kW / 533 hp net (540 hp SAE gross-equivalent), base power across all gears, rated at 1800 rpm flywheel |
| Displacement | 18.1 L (1,104.5 cu in); bore 145 mm (5.7 in), stroke 183 mm (7.2 in) |
| Max torque / torque rise | 2713 N·m (2,001 lb-ft) net, 30% torque rise |
| Emissions tier | Offered as U.S. EPA Tier 4 Interim / EPA-ARB Flexibility certified (Tier 3 credit) for US, Canada, EU and other regulated regions, or as a non-current Tier 2 / EU Stage II engine for unregulated regions. Later production limits engine speed to 1950 rpm for reduced fuel use. |
Weights
| Base configuration operating weight | approx. 62,400–62,730 kg (137,700–138,290 lb) with standard 29.5-29 tires, full fluids and operator — figure varies slightly by spec edition |
| Typically equipped operating weight | 65,840 kg (145,151 lb), includes ripper, push block, transmission guard and 29.5R29 radial tires |
| Maximum gross vehicle weight | 69,335 kg (152,857 lb) |
| Axle load split (typically equipped) | front axle 19,550 kg (43,100 lb); rear axle (tandem) 46,290 kg (102,051 lb) |
| Ground pressure | not published for this wheeled grader class |
Dimensions
| Overall length (front tire to end of rear frame) | 14.19 m (46.6 ft / 558.8 in) |
| Overall length (counterweight to ripper, max configuration) | 16.1 m (52.8 ft / 633.9 in) |
| Width over front tires | 4.28 m (14.04 ft / 168.5 in); over rear tires 4.225 m (166.3 in) |
| Height to top of cab | 4.45 m (14.61 ft / 175.3 in); height to exhaust stack 4.32 m (170.2 in) |
| Wheelbase (front axle to mid-tandem) | 10.28 m (33.7 ft / 404.6 in) |
| Tandem axle spacing | 2.285 m (90 in) |
| Ground clearance (rear axle) | 607 mm (23.9 in) |
| Moldboard (blade) width | 7.3 m (24 ft) |
| Turning radius (outside front tires) | 12.4 m (40 ft 9 in) |
Performance
| Top travel speed – forward (6th gear) | 43.4 km/h (27.0 mph); some spec editions list 43.0 km/h (26.7 mph) – varies by edition |
| Top travel speed – reverse (3rd gear) | 41.6 km/h (25.8 mph); some editions list 41.2 km/h (25.6 mph) – varies by edition |
| Gear range | 6 forward / 3 reverse; forward range 3.7–43.4 km/h (2.3–27.0 mph), reverse range 5.5–41.6 km/h (3.4–25.8 mph) |
| Articulation angle | 25° left/right; steering range 47.5° left/right |
| Blade pull (drawbar force) | base 39,236 kg (86,500 lb); maximum 43,518 kg (95,940 lb) |
| Blade down pressure | base 31,563 kg (69,583 lb); maximum 34,316 kg (75,654 lb) |
| Ripper penetration / pryout force | 13,601 kg (29,985 lb) penetration; 18,621 kg (41,052 lb) pryout |
| Gradeability | not published for this machine class |
Service capacities (summary)
| Fuel tank | 1,326 L (350 gal) |
| Hydraulic system | 264 L (70 gal) total, 135 L (36 gal) tank |
| Engine oil | 60 L (16 gal) |
| Cooling system | 90 L (24 gal) |
| Transmission oil | 87.1 L (23 gal) |
| Differential/final drives | 184 L (49 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
24M fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 60 L (16 US gal) | Cat DEO-ULS (API CJ-4) preferred for Tier 4 Interim/Flex-rated versions of the C18 engine; Cat DEO (API CI-4/CI-4 PLUS) for Tier 2/Tier 3 versions. SAE 10W-30 for -18 to 40 C (0 to 104 F) start-up ambient; SAE 15W-40 for -10 to 50 C (14 to 122 F). Cat DEO Cold Weather SAE 0W-40 covers down to -40 C (-40 F) for cold-soaked starts. |
| Cooling system | 90 L (24 US gal) | Cat ELC (Extended Life Coolant), premixed 50/50 with water for protection to about -37 C (-34 F); machine is factory filled with Extended Life Coolant rated to -50 C (-58 F), which needs a higher-glycol concentrate mix. Service life rated to 12,000 hours or 6 years, with a one-time Cat ELC Extender addition at the midpoint of service life. |
| Fuel tank | 1326 L (350 US gal) | Ultra low sulfur diesel (15 ppm sulfur or less) meeting the distillate diesel fuel specification. In cold climates use winter-grade or a No.1/No.2 blend for proper cloud and pour point; supplemental fuel heaters or de-icer additives as needed for cold starts. |
| Transmission oil | 87.1 L (23 US gal) | Cat TDTO covers the transmission/differential/final-drive group: SAE 0W-20 (Cold Weather) for -40 to 10 C (-40 to 50 F); SAE 10W for -20 to 10 C (-4 to 50 F); SAE 30 (factory fill) for 0 to 35 C (32 to 95 F); SAE 50 for 10 to 50 C (50 to 122 F). Cat TDTO-TMS multigrade covers -15 to 43 C (5 to 110 F) in one fill. |
| Differential / final drives (rear axle) | 184 L (49 US gal) | Same Cat TDTO viscosity lineup as the transmission (transmission, differential and final drive share one lubricant recommendation table): SAE 0W-20 Cold Weather down to -40 C (-40 F), SAE 10W, SAE 30 (factory fill), SAE 50 up to 50 C (122 F), or Cat TDTO-TMS multigrade. |
| Tandem final drive housings (each side) | 322 L (85 US gal) per side | Cat TDTO Cold Weather SAE 0W-20 for -40 to 10 C (-40 to 50 F); SAE 10W for -20 to 20 C (-4 to 68 F); SAE 30 (factory fill) for -10 to 40 C (14 to 104 F); SAE 50 for 10 to 50 C (50 to 122 F); Cat TDTO-TMS multigrade for -15 to 43 C (5 to 109 F). Unlike other M Series graders, the 24M tandem drives do not take the friction-modifier oil additive dosed into smaller M Series tandems. |
| Front wheel spindle bearing housing | 4 L (1 US gal) | Sealed "live spindle" running in a light lubricating oil; serviced with the same Cat TDTO grade selected for the tandem/wheel-spindle group above, matched to ambient temperature. |
| Circle drive housing (each) | 7.5 L (2 US gal) | Circle drive on the 24M (shared with 16H/24H/16M) uses final-drive-and-axle-type oil rather than gear oil: Cat FDAO Syn multigrade for -15 to 50 C (5 to 122 F); Cat FDAO SAE 60 for -10 to 50 C (14 to 122 F); or an oil meeting the FD-1 spec at SAE 50 for -10 to 32 C (14 to 90 F). |
| Hydraulic system and tank | 264 L (70 US gal) total system; 135 L (36 US gal) tank | Cat HYDO Advanced 10 SAE 10W (factory fill) for -15 to 40 C (5 to 104 F); Cat HYDO Advanced 30 SAE 30 for 20 to 50 C (68 to 122 F); Cat BIO HYDO Advanced ISO 46 multigrade biodegradable option for -25 to 45 C (-13 to 113 F); Cat TDTO Cold Weather SAE 0W-20 for extreme cold to -40 C (-40 F); Cat DEO Cold Weather SAE 0W-40 for -25 to 40 C (-13 to 104 F). |
| Grease (automatic lubrication system) | Spec only - no fill capacity; serviced via onboard automatic lubrication system | Covers articulation bearings and pins, blade lift and centershift cylinder sockets, fan-drive belt tightener, and pump drive shaft slip spline. Cat Extreme Application Grease NLGI 1 or 2 for high-load ditching, ripping, and heavy road maintenance duty (down to -35 C / -31 F); Cat Prime Application Grease NLGI 2 for average road maintenance duty (-20 to 40 C / -4 to 104 F); Cat Utility Grease NLGI 2 for light finish-grading duty. Fan drive bearings take Cat Ball Bearing Grease NLGI 2. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 24M maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
| Every 8,000 h |
|
Servicing the 24M beyond the schedule
Predictive Maintenance & Fluid Analysis
Run S·O·S sampling through the factory ports on the C18 ACERT engine, powershift transmission, differential/final drives, and hydraulic system at every scheduled interval. The 24M's load-sensing hydraulics and planetary transmission both telegraph wear through metal counts before a failure shows up in performance. Track tandem housing and circle drive housing oil condition separately from the differential, since each carries its own large sump. Watch coolant sample trends given the air-to-air aftercooler, and let sample data, not just hours, decide when hydraulic oil actually needs changing.
Corrective & Common Repairs
Most callbacks on the 24M trace to drawbar-circle-moldboard wear: loose circle segments, worn wear strips, and a slipping circle drive clutch that needs adjustment rather than replacement. Check the articulation hitch bearing and locking pin for play, and inspect the bolt-on modular rear axle seals for weeping before they turn into a differential oil loss. On the engine side, watch the air-to-air aftercooler and dual-stage air cleaner for restriction, since a plugged system shows up first as lost lugging power under load, not as a fault code.
Overhaul & Rebuild Points
Because the 24M was built for continuous haul-road duty, plan major work around the drawbar-circle-moldboard system, the tandem final drives, and the powershift transmission's torque converter and clutch packs, all rebuildable rather than disposable. Circle segments, wear strips, and shims need periodic renewal rather than a one-time fit, so budget recurring adjustment labor between full rebuilds. Tandem housings and the differential/final drive assembly hold large oil volumes; inspect them for metal loading at each major service to catch bearing and gear wear before it becomes an unplanned tear-down.
Seasonal & Environment Servicing
The 24M ships with Extended Life Coolant rated to -50°C (-58°F) and a standard ether starting aid, both aimed at cold haul-road sites; confirm glycol concentration and battery condition before winter shutdown. In hot, dusty mining environments, clean the aftercooler and radiator cores often and watch the hydraulic demand fan and air cleaner service indicator, since airborne abrasives are the main driver of undercarriage-adjacent wear on the circle and tandem seals. Variable down-pressure blade float, where fitted, helps in mud and snow clearing without overloading the cutting edge.
24M common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 220-8678 | Seal-Ring | Fuel system service | Check fitment → |
| 326-1644 | Filter As-Water Sep & Fuel | Fuel system service | Check fitment → |
| 231-0167 | Filter Element As-Air | Air intake service | Check fitment → |
| 1G-8878 | Filter As-Oil | Hydraulic service | Check fitment → |
| 328-3655 | Filter Element As-Oil | Hydraulic service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
24M fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 100-01 | Engine oil pressure signal reading below the normal operating range | Low engine oil level, worn oil pump, plugged oil filter, or a failed oil pressure sensor/wiring | Stop the engine, check oil level and condition, and inspect the sensor wiring and connector before restarting |
| E360 | Low engine oil pressure event, staged from warning through automatic derate to shutdown depending on severity | Same underlying causes as a CID 100 circuit fault, but triggered by an actual low-pressure reading rather than a wiring problem | Idle down and shut off immediately at higher severity levels, then verify oil level and pressure with a manual gauge |
| 110-00 | Engine coolant temperature above the normal operating range | Low coolant, a blocked radiator core, a failed fan clutch or drive, or a stuck thermostat | Reduce load and let the engine idle, then check coolant level and inspect the radiator and fan for debris or damage once safe to do so |
| E361 | High engine coolant temperature event, staged warning through derate/shutdown | Same cooling-system faults as a CID 110 code, confirmed by an actual over-temperature condition rather than a sensor fault | Bring the engine to idle, watch the gauge, shut down if temperature keeps climbing, then inspect the cooling system |
| 111-01 | Engine coolant level reading below normal | External coolant leak, low reservoir level, or a faulty level sensor | Inspect for external leaks, top off coolant to the correct level, and check the level sensor connector |
| E2143 | Low engine coolant level event | Same as a CID 111 code, confirmed by an actual low-level condition rather than a sensor fault | Check coolant level and inspect hoses and radiator for leaks before adding coolant |
| 168-02 | System/battery voltage erratic or intermittent at the ECM | Loose or corroded battery cables and ground straps, a failing alternator, or chafed wiring | Check battery terminals and ground connections, test charging system output, and inspect the wiring harness for damage |
| 247-09 | SAE J1939 data link abnormal update rate, meaning ECMs are losing steady communication on the machine's CAN data link | Damaged or corroded data link wiring, a loose ECM connector, or another control module dropping offline | Check data link wiring and connectors for damage or corrosion, then use Cat ET to identify which module lost communication |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
24M attachments & work tools
Grading moldboard
Standard moldboard measures 7315 mm x 1067 mm x 50 mm (24 ft x 42 in x 2 in) with heat-treated rails for service life. A one-piece forged steel circle with a sacrificial wear system carries the blade; a High-Performance Circle upgrade with extended-life blade rail wear strips is offered as a retrofit on this platform to cut drawbar/circle wear costs.
Cutting edges and end bits
Standard curved cutting edge is 330 mm x 28 mm (13 in x 1-1/8 in) curved DH-2 steel, fitted with through-hardened end bits that protect the moldboard ends from wear. Optional edge systems for this class include flat 406 mm x 60 mm (16 in x 2-3/8 in), serrated 406 mm x 75 mm (16 in x 3 in), and a mining-bit style 355.6 mm x 75 mm (14 in x 3 in) system for abrasive haul-road work.
Rear ripper/scarifier
Rear ripper/scarifier frame provides up to 7 shank positions, with 3 shanks and tips fitted as standard equipment; remaining positions are filled as an option. Penetration force runs about 13,600 kg (30,000 lb) and pry-out force about 18,600 kg (41,000 lb), with a maximum ripping depth around 454 mm (17.9 in). Shanks pin into the holder frame rather than using a quick-coupler.
Push block / front counterweight
A nose-mounted push block bolts to the front frame plate. It counterbalances the weight of the rear ripper and also serves as a push point when the grader is used to assist dozing or push work on haul roads.
Blade control and hydraulic float options
Blade lift valves include built-in float: both lift cylinders can float together so the blade follows road contour, or a single cylinder can float while the operator holds slope on the other. An optional Variable Down Pressure feature lets the operator dial in float down-force, and accumulators cushion the blade lift circuit; the system integrates with cross-slope grade control technology.
Front work-tool mounting provision
A front lift group supplies the mounting plates and, where the tool needs it, auxiliary hydraulic plumbing to fit front-mounted work tools such as the push block. Machines in this size class use bolted or pinned frame attachment points rather than an excavator-style quick coupler.
Guarding and access packages
Factory guard options for this class include engine compartment guarding, front axle guards, mud guards, and tandem fenders with guardrails, plus a sound-suppression package for noise-restricted sites. Access is offered in dual-platform configurations (standard and plus) to suit mine-site fall-protection needs.
Lighting and visibility packages
Work lighting is offered in halogen, HID, or LED packages with an LED warning strobe option; exact package content varies by configuration and region, so confirm availability with the dealer order guide.
All 24M assemblies by section
Every catalogued assembly group for the Caterpillar 24M. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
177-9085 Aftercooler Gp-Air
| 09***49 | Bolt; (M8x1.25x40-mm) | 8 |
| 12***24 | Spacer; (11x25x10.5-mm Thk) | 1 |
| 16***77 | Hose; (Hump) | 2 |
253-3993 Air Cleaner Gp
| 15***16 | Band As | 1 |
| 25***93 | Air Cleaner Group | 1 |
| 28***74 | Precleaner Group; -Cab Air | 1 |
275-5230 Air Cleaner Gp -Cab Air Precleaner
| 10***25 | Gasket; (Air Inlet Manifold)(Intake Manifold Inlet) | 1 |
| 10***03 | Elbow; (Air Inlet) | 1 |
| 12***29 | Clamp; (V-Band) | 1 |
253-3990 Lines Gp-Aftercooler Air
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 3 |
| 10***20 | Spacer; (10.5x25x20-mm Thk) | 2 |
| 1C***51 | Bolt--Installation Of 2v***26 Retainer | 2 |
225-0998 Manifold Gp-Exhaust
| 12***26 | Spacer; (13x25x25-mm Thk) | 4 |
| 12***15 | Spacer; (10.5x20x29-mm Thk) | 2 |
| 22***98 | Manifold Group-Exhaust | 1 |
275-7668 Mounting Gp-Muffler
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 20***04 | Pressurizer As-Cab | 1 |
| 23***20 | Cap As-Air Cleaner; (Precleaner) | 1 |
253-3994 Muffler Gp
| 1S***95 | Gasket-Turbocharger To Manifold; Gasket Turbocharger To Manifold | 1 |
| 25***94 | Muffler Group | 1 |
| 29***36 | Turbocharger Group | 1 |
283-0774 Precleaner Gp -Cab Air
| 11***87 | Bolt; (M6x0.04x10.4-mm)(6mm X 0.04 Thd) | 1 |
| 16***58 | Clip-Hose | 1 |
| 16***63 | Clamp | 2 |
262-1079 Turbocharger Gp
| 00***73 | Elbow, Each Including: | 1 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 5 |
| 10***20 | Spacer; (10.5x25x20-mm Thk) | 5 |
296-7636 Turbocharger Gp
| 00***62 | Elbow (To Primary Filter Base) | 1 |
| 03***88 | Connector-Tube Assembly To Main Relief | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
Basic Engine
233-7245 Actuator Gp-Valve
| 23***45 | Actuator Group-Valve | 1 |
| 23***05 | Support | 3 |
| 23***08 | Bolt; (1/2-13x5.65-In) | 3 |
322-8542 Actuator Gp-Valve
| 23***05 | Support | 3 |
| 23***08 | Bolt; (1/2-13x5.65-In) | 3 |
| 23***88 | Nut; (3/8-16-Thd) | 6 |
133-9907 Adapter Gp-Pump Drive
| 13***06 | Adapter | 1 |
| 13***07 | Adapter Group-Pump Drive; -Remote | 1 |
| 1B***67 | Ball Bearing | 2 |
234-5005 Base Gp-Valve Cover & Inj Harn
| 10***18 | Clip | 3 |
| 10***19 | Clip | 3 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
278-5662 Base Gp-Valve Cover & Inj Harn
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***34 | Kit-Receptacle; (12-Pin)(Valve Cover & Inj Harness) | 1 |
| 12***72 | Bolt; (5/16-18x2.36-In) | 1 |
308-6602 Bracket Gp-Mounting
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 30***01 | Bracket As | 1 |
| 30***02 | Bracket Group-Mounting | 1 |
314-9614 Camshaft Gp
| 10***89 | Cover | 1 |
| 11***36 | Screw-Flat Head; (5/16-18x0.875-In) | 3 |
| 31***12 | Camshaft | 1 |
234-7935 Camshaft Gp
| 10***89 | Cover | 1 |
| 11***36 | Screw-Flat Head; (5/16-18x0.875-In) | 3 |
| 23***35 | Camshaft Group | 1 |
107-6736 Cover Gp-Cylinder Block
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 10***36 | Cover Group-Cylinder Block; -Remote | 1 |
| 4N***99 | Gasket; (Oil Drain) | 1 |
140-9746 Cover Gp-Cylinder Block
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 12***35 | Seal-Integral | 1 |
| 14***46 | Cover Group-Cylinder Block; (Central Structure) | 1 |
216-5540 Cover Gp-Flywheel Housing
| 21***40 | Cover Group-Flywheel Housing; -Bottom | 1 |
| 21***00 | Cover | 1 |
| 4M***80 | Gasket Elbow Mtg Part Of Kit P/N 5r***26 | 1 |
220-6390 Cover Gp-Flywheel Housing
| 22***90 | Cover Group-Flywheel Housing | 1 |
| 4N***14 | Cover | 1 |
| 6V***29 | Bolt; (M16x2.0x40mm) | 3 |
159-6159 Cover Gp-Front Housing
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 2 |
| 15***59 | Cover Group-Front Housing | 1 |
| 16***71 | Seal | 1 |
235-8781 Cover Gp-Front Housing
| 11***18 | Cover | 1 |
| 11***19 | Gasket | 1 |
| 1F***58 | Nut-Full; (1/2-13-Thd)(Air Lines) | 3 |
120-9847 Cover Gp-Front Housing
| 06***55 | Seal-O-Ring (Id=47.22mm) | 1 |
| 12***47 | Cover Group-Front Housing; -Remote | 1 |
| 2B***95 | Cap Screw--Tube Assembly To Air Inlet Pipe | 2 |
230-0104 Cover Gp-Sound Suppression -Front Housing
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 1 |
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 1 |
| 10***98 | Cover As-Panel | 1 |
225-1148 Cover Gp-Valve Mechanism
| 14***78 | Grommet | 1 |
| 22***44 | Cover-Valve | 1 |
| 22***48 | Cover Group-Valve Mechanism | 1 |
239-4111 Cover Gp-Valve Mechanism
| 14***78 | Grommet | 1 |
| 23***11 | Cover Group-Valve Mechanism | 1 |
| 24***37 | Seal; (Cover, Valve Mechanism) | 1 |
187-1328 Cover Gp-Valve Mechanism
| 15***35 | Cover Group-Valve Mechanism | 2 |
| 18***28 | Cover Group-Valve Mechanism | 1 |
| 34***04 | Cover Group-Valve Mechanism | 1 |
150-3135 Cover Gp-Valve Mechanism
| 14***78 | Grommet | 1 |
| 15***57 | Cover-Valve Mech | 1 |
| 15***35 | Cover Group-Valve Mechanism | 1 |
239-4113 Cover Gp-Valve Mechanism
| 22***48 | Cover Group-Valve Mechanism | 2 |
| 23***11 | Cover Group-Valve Mechanism | 1 |
| 23***13 | Cover Group-Valve Mechanism | 1 |
341-6804 Cover Gp-Valve Mechanism
| 14***78 | Grommet | 1 |
| 23***06 | Cover As-Valve | 1 |
| 24***37 | Seal; (Cover, Valve Mechanism) | 1 |
223-9732 Crankshaft Gp
| 18***81 | Gear-Crankshaft; (80-Teeth) | 1 |
| 18***18 | Crankshaft As | 1 |
| 22***32 | Crankshaft Group | 1 |
323-8451 Cylinder Block As
| 15***09 | Seal-Liner | 6 |
| 15***93 | Seal-Liner | 12 |
| 26***31 | Cylinder Block As | 1 |
297-4267 Cylinder Block Gp
| 15***09 | Seal-Liner | 6 |
| 15***93 | Seal-Liner | 12 |
| 26***31 | Cylinder Block As | 1 |
261-0052 Cylinder Block As
| 15***09 | Seal-Liner | 6 |
| 15***10 | Seal-Liner | 6 |
| 15***93 | Seal-Liner | 6 |
301-3018 Cylinder Block As
| 15***09 | Seal-Liner | 6 |
| 15***10 | Seal-Liner | 6 |
| 15***93 | Seal-Liner | 6 |
267-4631 Cylinder Block As
| 16***81 | Cap-Crankshaft Bearing | 7 |
| 26***31 | Cylinder Block As | 1 |
| 3P***23 | Bolt-Bearing Cap; (7/8-14x7.75-In) | 14 |
229-8568 Cylinder Block As
| 16***81 | Cap-Crankshaft Bearing | 7 |
| 16***83 | Bolt; (7/8-14x7.5-In) | 14 |
| 22***68 | Cylinder Block As | 1 |
297-3207 Cylinder Block Gp
| 10***99 | Plug | 2 |
| 14***29 | Seal; (Drainback) | 1 |
| 1S***40 | Dowel; (30.23 mm X 9.37 mm) | 1 |
261-0191 Cylinder Block Gp
| 10***99 | Plug | 2 |
| 14***29 | Seal; (Drainback) | 1 |
| 1S***40 | Dowel; (30.23 mm X 9.37 mm) | 1 |
281-1640 Cylinder Head As
| 12***47 | Guide-Valve; (0.51-mm Os)(Standard) | 0 |
| 12***75 | Guide-Valve; (Standard) | 24 |
| 12***12 | Guide-Valve; (0.13-mm Os)(Standard) | 0 |
274-1953 Cylinder Head Gp
| 10***73 | Fastener Group-Cylinder Head; (Marked X) | 10 |
| 12***54 | Bolt-12 Point Head; (3/4-16x8.5-In) | 1 |
| 12***55 | Bolt-12 Point Head; (3/4-16x7.638-In) | 1 |
263-5055 Cylinder Head Gp
| 15***24 | Valve; (Exhaust) | 12 |
| 16***78 | Seal-Valve Stem; (Exhaust) | 24 |
| 18***01 | Rotocoil Assem. | 24 |
227-3705 Damper Gp
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 12 |
| 16***30 | Damper As | 1 |
| 1A***03 | Bolt 12.07 cm(4.75 In.) Long | 6 |
253-3988 Drive Gp-Accessory
| 21***38 | Belt Tensioner; (Refrigerant Compressor) | 1 |
| 21***24 | Compressor Group-Refrigerant | 1 |
| 24***13 | Alternator Group-Charging; (24-Volt, 150-Ampere) | 1 |
6i-3638 Drive Gp-Pump
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 3 |
| 13***07 | Adapter Group-Pump Drive; -Remote | 1 |
| 5M***94 | Washer; Bracket To Tee, Bracket To Block, Tube As. To Tee, Tube As. To Oil Cooler | 4 |
239-9624 Engine Brake Gp
| 23***46 | Screw-Adjustment | 2 |
| 23***47 | Nut-Jam | 2 |
| 23***24 | Engine Brake Group | 1 |
330-1919 Engine Brake Gp
| 03***79 | Seal-O-Ring (Id=10.82mm) | 1 |
| 10***97 | Mount-Wire Tie | 1 |
| 22***63 | Ring | 1 |
108-9382 Fastener Gp-Front Housing
| 10***82 | Fastener Group-Front Housing | 1 |
| 14***68 | Stud-Taperlock | 2 |
| 1F***58 | Nut-Full; (1/2-13-Thd)(Air Lines) | 2 |
4p-6846 Fastener Gp-Front Housing
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 4P***46 | Fastener Group-Front Housing; -Remote | 1 |
| 5M***94 | Washer; Bracket To Tee, Bracket To Block, Tube As. To Tee, Tube As. To Oil Cooler | 2 |
109-1657 Fastener Gp-Valve Mechanism
| 10***57 | Fastener Group-Valve Mechanism | 1 |
| 5J***94 | Screw,Cap,Socket He Manifold Mtg | 12 |
| 8L***13 | Strap-Cable(Tie 5.50" Long) | 6 |
273-6561 Flywheel Gp
| 0S***02 | Bolt; (5/8-18x3.5-In) | 12 |
| 27***59 | Flywheel As | 1 |
| 27***61 | Flywheel Group | 1 |
204-9316 Gear Gp-Camshaft
| 10***26 | Dowel | 1 |
| 20***16 | Gear Group-Camshaft | 1 |
| 9X***72 | Bolt-Locking; (3/8-16x0.875-In) | 16 |
207-0449 Gear Gp-Front
| 03***85 | Bolt-12 Point Hd-Engine Flywheel To | 6 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 1 |
| 10***68 | Bearing-Sleeve | 1 |
278-0095 Gear Gp-Rear
| 13***83 | Bolt-12 Point Head; (M10x1.5x30-mm) | 12 |
| 18***23 | Bolt-12 Point Head; (M12x1.75x60-mm) | 8 |
| 20***98 | Gear As; (51-Teeth) | 1 |
275-2192 Guard Gp-Belt -Alternator
| 26***23 | Guard As | 1 |
| 27***52 | Bracket As | 1 |
| 27***92 | Guard Group-Belt; -Alternator | 1 |
220-6368 Housing Gp-Flywheel
| 14***95 | Plug As | 2 |
| 14***11 | Plug Group | 2 |
| 15***24 | Hex Head Plug; (-4sae) (D6r Iii) | 4 |
241-0478 Housing Gp-Front
| 18***20 | Housing-Front | 1 |
| 24***78 | Housing Group-Front | 1 |
| 3E***44 | Stud; (1/2-13x2.95-In) | 1 |
243-5786 Housing Gp-Front
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 9 |
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 1 |
111-2088 Lifting Gp-Engine
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 8 |
| 10***85 | Eye-Lifting | 1 |
| 11***88 | Lifting Group-Engine; (Rear) | 1 |
111-2355 Lifting Gp-Engine
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 4 |
| 11***44 | Eye-Lifting | 1 |
| 11***55 | Lifting Group-Engine; (Front) | 1 |
266-3699 Mechanism Gp-Fuel Pump & Valve
| 26***99 | Mechanism Group-Fuel Pump & Valve | 1 |
| 27***38 | Rocker Arm Group | 3 |
| 6I***58 | Bridge-Valve | 12 |
190-0009 Mechanism Gp-Fuel Pump & Valve
| 19***09 | Mechanism Group-Fuel Pump & Valve | 1 |
| 32***36 | Rocker Arm Group; -Non-Brake | 3 |
| 34***43 | Bridge-Valve | 12 |
188-1754 Mounting Gp-Alternator & Compr
| 0S***08 | Bolt-Support To Starting Engine Timing Gear Housing | 2 |
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 2 |
| 18***54 | Mounting Group-Alternator & Compr | 1 |
253-3991 Mounting Gp-Engine & Xmsn
| 0L***78 | Bolt,Machine Governor And Decelerator Control | 8 |
| 1A***23 | Dowel (1" Long) | 2 |
| 25***91 | Mounting Group-Engine & Xmsn | 1 |
307-7409 Pan Gp-Oil
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
277-8461 Pan Gp-Oil -Engine
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 1 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 2 |
| 0S***95 | Bolt 1.25 In. (31.75 mm) Long Guard Assemblies To Radiator Guard | 2 |
174-3874 Panel Gp-Sound Suppression
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 3 |
| 17***57 | Panel As | 1 |
| 17***74 | Panel Group-Sound Suppression; -Engine, Lh | 1 |
227-9980 Panel Gp-Sound Suppression -Engine Front Housing
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 3 |
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 2 |
220-1441 Piston & Rod Gp
| 15***25 | Bolt; (7/16-14-2a-Thd) | 1 |
| 18***50 | Pin-Piston | 1 |
| 21***17 | Bolt; (Mj11x1.25x84-mm) | 4 |
353-9979 Plate As-Front Housing
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
| 23***80 | Seal-O-Ring | 1 |
| 23***81 | Seal-O-Ring | 1 |
230-5379 Plug Gp-Cylinder Block
| 23***79 | Plug Group-Cylinder Block | 1 |
| 6V***65 | O-Ring - For Oil Fill Plug | 1 |
| 9S***10 | Plug; (Straight Thread O-Ring)(Cylinder Head) | 1 |
305-9196 Plug Gp-Cylinder Block
| 18***07 | Plug As; (Hi Tempertature) | 4 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
| 23***80 | Seal-O-Ring | 1 |
230-5378 Plug Gp-Cylinder Head
| 17***48 | Pulley; (8 Groove) | 1 |
| 23***78 | Plug Group-Cylinder Head | 1 |
| 7X***45 | Bolt 5/8" X 1 3/4" Long (First Type) | 4 |
170-1757 Pulley Gp-Crankshaft
| 06***39 | Seal-O-Ring | 2 |
| 17***57 | Pulley Group-Crankshaft | 1 |
| 19***51 | Button; (24-mm Od) | 2 |
328-4238 Rocker Arm Gp -Exhaust
| 30***52 | Rocker Arm Group; -Unit Injector | 2 |
| 30***22 | Shaft As-Rocker Arm, Exhaust Manifold | 1 |
| 32***94 | Rocker Arm Group; -Exhaust | 2 |
328-4242 Rocker Arm Gp
| 14***68 | Seal-Crankshaft; (Rear)(Flywheel Housing) | 1 |
| 32***42 | Rocker Arm Group | 1 |
328-4236 Rocker Arm Gp -Non-Brake
| 06***39 | Seal-O-Ring | 1 |
| 19***51 | Button; (24-mm Od) | 1 |
| 19***69 | Screw-Arm Adjustment; (9/16-18x2-In) | 1 |
278-1938 Rocker Arm Gp
| 06***39 | Seal-O-Ring | 1 |
| 19***51 | Button; (24-mm Od) | 1 |
| 19***69 | Screw-Arm Adjustment; (9/16-18x2-In) | 1 |
320-2794 Rocker Arm Gp -Exhaust
| 25***21 | Button | 1 |
| 27***91 | Screw-Arm Adjustment; (3/8-24x1.20-In) | 1 |
| 27***17 | Nut; (3/8-24-Thd) | 1 |
320-2796 Rocker Arm Gp -Intake
| 30***22 | Shaft As-Rocker Arm, Exhaust Manifold | 1 |
| 32***96 | Rocker Arm Group; -Intake | 5 |
| 32***38 | Rocker Arm Group; -Exhaust | 2 |
301-5352 Rocker Arm Gp -Unit Injector
| 25***21 | Button | 1 |
| 27***91 | Screw-Arm Adjustment; (3/8-24x1.20-In) | 1 |
| 27***17 | Nut; (3/8-24-Thd) | 1 |
319-7401 Seal Gp-Crankshaft -Front
| 31***01 | Seal Group-Crankshaft; -Front | 1 |
| 4N***83 | Dowel; (31.8mm X 15.88mm) | 2 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 8 |
319-0785 Seal Gp-Crankshaft -Rear
| 14***67 | Seal Group-Crankshaft; (Front) | 1 |
| 31***85 | Seal Group-Crankshaft; -Rear | 1 |
235-5021 Support Gp-Engine
| 23***21 | Support Group-Engine | 1 |
| 26***08 | Insulation | 1 |
| 26***92 | Insulation | 1 |
272-5997 Suppression Gp-Sound -Engine Enclosure
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 1 |
| 27***97 | Suppression Group-Sound; -Engine Enclosure | 1 |
Braking System
2g-6535 Slack Adjuster Gp
| 11***89 | Ring | 1 |
| 16***84 | Seal As-Buffer | 1 |
| 16***18 | Seal-U-Cup | 1 |
219-7282 Accumulator Gp-Brake -Charged
| 11***58 | Hose As | 1 |
| 11***74 | Bolt; (L=20mm) | 1 |
| 13***52 | Tee-Union | 1 |
271-9321 Brake Gp-Service & Parking -Front Tandem
| 15***66 | Pin As | 4 |
| 27***21 | Brake Group-Service & Parking; -Front Tandem | 1 |
| 27***33 | Cylinder Group-Articulation | 2 |
273-5910 Brake Gp-Service & Parking -Tandem
| 12***17 | Plate | 1 |
| 12***08 | Cap As | 6 |
| 16***92 | Bolt; (M24x3x160-mm) | 12 |
271-9322 Brake Gp-Service & Parking -Rear Tandem
| 14***88 | Cylinder Group-Blade Tip | 2 |
| 19***55 | Pin As | 2 |
| 27***22 | Brake Group-Service & Parking; -Rear Tandem | 1 |
268-0239 Control Gp-Service Brake
| 11***90 | Plate-Retainer | 1 |
| 13***26 | Pin | 1 |
| 14***14 | Cylinder Group-Sideshift | 1 |
120-4409 Fastener Gp-Brake
| 12***09 | Fastener Group-Brake | 1 |
| 22***05 | Stud-Ball | 2 |
| 26***14 | Pin As | 2 |
5t-1060 Pump & Motor Gp-Brake Release -Parking, Secondary
| 11***36 | Cylinder Group-Wheel Lean | 2 |
| 11***90 | Plate-Retainer | 2 |
| 11***93 | Retainer | 2 |
Cooling System
220-3775 Cooling Ar
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 1 |
274-9994 Cooling Ar
| 21***68 | Motor Group-Piston; -Hydraulic Fan | 1 |
| 24***29 | Spider As-Fan; (8-Blade) | 1 |
| 26***89 | Shroud As | 1 |
178-7998 Fan & Motor Gp
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 17***98 | Fan & Motor Group | 1 |
109-2373 Fastener Gp-Water Pump
| 10***73 | Fastener Group-Water Pump; (Water Pump Cover) | 1 |
| 15***25 | Valve-Fluid Sampling | 1 |
| 15***70 | Cap-Dust; (Engine Coolant) | 1 |
253-3992 Lines Gp-Water
286-1777 Lines Gp-Water
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 10***30 | Bearing As-Roller | 1 |
| 12***17 | Seal Group; (Water Pump) | 1 |
174-5986 Pump Gp-Water
| 12***81 | Seal; (103.5-cm Each) | 0 |
| 12***23 | Seal; (32-cm) | 0 |
| 17***86 | Pump Group-Water | 1 |
161-5719 Pump Gp-Water
| 10***77 | Seal-O-Ring; (100.97mm Id) | 1 |
| 12***72 | Seal-O-Ring (215.49mm Id) | 1 |
| 16***19 | Pump Group-Water | 2 |
276-2386 Radiator Gp
| 1P***69 | Plug-Seal; (Flywheel Housing Drain) | 1 |
| 27***86 | Radiator Group | 1 |
| 29***42 | Cap As-Radiator | 1 |
300-1706 Tank Gp-Coolant
| 12***07 | Mount As-Resilient | 4 |
| 27***90 | Seal | 2 |
| 27***45 | Bracket As | 1 |
Electrical And Starting System
3e-6328 Alarm Gp
| 12***49 | Stud; (3/8-16, 5/8-18x3.1-In) | 1 |
| 3E***28 | Alarm Group; -Caterpillar Monitoring System-Action | 1 |
| 5P***47 | Washer (Bracket To Valve Support) | 1 |
266-8986 Battery & Wiring Gp
| 15***96 | Support As | 1 |
| 15***98 | Support As | 1 |
| 16***19 | Stud | 4 |
272-2286 Bracket Gp-Mounting -Mast
| 27***86 | Bracket Group-Mounting; -Mast | 1 |
| 30***87 | Control Group-Unprogrammed; (Transmission) | 1 |
278-1867 Camera Ar -Work Area Visual System
| 17***31 | Screw; (Truss Head) (M4x0.7x12mm) | 4 |
| 18***79 | Converter-Power; (20-Ampere)(24-Volt To 12-Volt) | 1 |
| 27***67 | Camera Ar; -Work Area Visual System | 1 |
126-7631 Connection Gp-Electrical
| 11***11 | Socket-Auxiliary Power; (12-Volt)(Power Port) | 1 |
| 12***31 | Connection Group-Electrical; (Cylinder Block Ground) | 1 |
| 16***76 | Film; (Identification) (12v) (On Rear Console Behind Operators Seat) | 1 |
243-1560 Control & Mtg Gp-Engine Elek
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 24***60 | Control & Mtg Group-Engine Elek | 1 |
299-9146 Control Gp-Implement
| 29***46 | Control Group-Implement | 1 |
| 35***17 | Software Group-Implement | 1 |
| 35***18 | Service Group-Implement | 1 |
275-8970 Control Gp-Unprogrammed -Implement 1
| 27***70 | Control Group-Unprogrammed; -Implement 1 | 1 |
| 29***11 | Configuration-Premium | 1 |
275-8969 Control Gp-Unprogrammed -Implement 2
| 27***69 | Control Group-Unprogrammed; -Implement 2 | 1 |
| 34***67 | Software Group-Implement | 1 |
| 34***88 | Service Group-Implement | 1 |
233-3134 Converter Gp-Electrical -Radio
| 23***34 | Converter Group-Electrical; -Radio | 1 |
| 35***16 | Software Group-Monitor; (Messenger) | 1 |
| 35***17 | Service Group-Monitor | 1 |
233-3135 Converter Gp-Electrical
| 23***35 | Converter Group-Electrical | 1 |
| 30***69 | Control Group-Unprgmed Monitor; -Messenger | 1 |
262-1421 Electronics Gp-Communication -Product Link 300
| 26***21 | Electronics Group-Communication; -Product Link 300 | 1 |
| 35***18 | Software Group-Monitor | 1 |
| 35***19 | Service Group-Monitor | 1 |
250-9258 Electronics Gp-Implement -Implement 2
| 25***58 | Electronics Group-Implement; -Implement 2 | 1 |
| 35***22 | Software Group-Monitor | 1 |
| 35***23 | Service Group-Monitor | 1 |
303-2246 Electronics Gp-Implement
| 30***46 | Electronics Group-Implement | 1 |
| 35***24 | Software Group-Monitor | 1 |
| 35***25 | Service Group-Monitor | 1 |
250-9257 Electronics Gp-Implement
| 25***57 | Electronics Group-Implement | 1 |
| 35***20 | Software Group-Monitor | 1 |
| 35***21 | Service Group-Monitor | 1 |
275-9650 Electronics Gp-Monitor -Messenger
| 26***61 | Wiring Group-Grade Control | 1 |
| 27***50 | Electronics Group-Monitor; -Messenger | 1 |
| 28***42 | Grade Control Group; -Accugrade | 1 |
302-0361 Electronics Gp-Monitor -Arabic, Chinese, English, Portuguese, Russian
| 30***61 | Electronics Group-Monitor; -Arabic, Chinese, English, Portuguese, Russian | 1 |
| 31***23 | Panel Group-Control; -Accugrade, Lh | 1 |
| 31***17 | Panel Group-Control; -Accugrade, Rh | 1 |
302-0362 Electronics Gp-Monitor -English, Portuguese, Romanian, Slovenian
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
302-0359 Electronics Gp-Monitor -Danish, English, Finnish, Norwegian, Portuguese, Swedish
| 11***58 | Washer; (6.5x17x1-mm Thk) | 6 |
| 16***12 | Alarm; (Action) | 1 |
| 16***13 | Baffle As | 1 |
250-9254 Electronics Gp-Monitor -Dutch, English, French, German, Portuguese, Spanish
| 25***54 | Electronics Group-Monitor; -Dutch, English, French, German, Portuguese, Spanish | 1 |
| 35***19 | Software Group-Power Train | 1 |
| 35***20 | Service Group-Power Train | 1 |
302-0360 Electronics Gp-Monitor -English, Greek, Hebrew, Italian, Portuguese, Turkish
| 22***33 | Mast Group; -Laser Receiver | 1 |
| 23***49 | Cable-Coiled; (Mast) | 1 |
| 23***70 | Mounting Group-Receiver; -Mast | 1 |
310-3221 Electronics Gp-Power Train
| 24***64 | Spacer | 1 |
| 26***91 | Harness As-Power; (Product Link Radio) | 1 |
| 26***21 | Electronics Group-Communication; -Product Link 300 | 1 |
269-2210 Grade Control Ar -Accugrade
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 22***96 | Antenna; (Flexible)(Flex) | 1 |
291-1106 Grade Control Ar -Accugrade
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 13***11 | Screw; (M6x1x35-mm)(M6x1.0x20mm) | 2 |
317-6526 Grade Control Ar-Laser -Advanced Tracking System
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 31***26 | Grade Control Ar-Laser; -Advanced Tracking System | 1 |
285-2042 Grade Control Gp -Accugrade
| 15***50 | Body As-Lamp | 1 |
| 15***52 | Bezel | 1 |
| 18***49 | Clamp | 2 |
266-7029 Installation Ar-Communication -Product Link 321sr
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***51 | Screw; (M4x32-mm) | 4 |
| 10***52 | Seal | 1 |
313-6836 Installation Ar-Communication -Product Link 321sr
| 12***27 | Screw-Pan Head; (M3x0.5x16-mm) | 4 |
| 20***38 | Lamp-Halogen; (12/24-Volt, 35-Watt) | 1 |
| 22***74 | Bezel; (Hid) | 1 |
266-7040 Installation Gp-Security
| 12***27 | Screw-Pan Head; (M3x0.5x16-mm) | 4 |
| 15***54 | Bolt; (M10x1.5x40-mm) | 1 |
| 22***71 | Lens As | 1 |
261-1502 Lamp Gp
| 15***49 | Lens As; (Headlight, High Beam) | 1 |
| 15***50 | Body As-Lamp | 1 |
| 15***52 | Bezel | 1 |
3e-6389 Lamp Gp-Dome -With Switch
| 15***50 | Body As-Lamp | 1 |
| 15***52 | Bezel | 1 |
| 16***77 | Lens As; (Headlight, Low Beam) | 1 |
234-4325 Lamp Gp-Flood
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 23***25 | Lamp Group-Flood; -Suspended Mount | 1 |
176-0780 Lamp Gp-Flood
| 12***27 | Screw-Pan Head; (M3x0.5x16-mm) | 4 |
| 17***80 | Lamp Group-Flood; -Cab Front, Cab Rear | 1 |
| 20***38 | Lamp-Halogen; (12/24-Volt, 35-Watt) | 1 |
290-8119 Lamp Gp-Flood -Hid
| 13***00 | Clip; (Tab) | 2 |
| 27***77 | Washer-Hard; (11x18.5x15-mm Thk) | 8 |
| 29***19 | Lamp Group-Flood; -Hid | 1 |
210-8422 Lamp Gp-Flood -24-Volt, 35-Watt, Hid
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 21***22 | Lamp Group-Flood; -24-Volt, 35-Watt, Hid | 1 |
147-0319 Lamp Gp-Flood
| 12***27 | Screw-Pan Head; (M3x0.5x16-mm) | 4 |
| 14***19 | Lamp Group-Flood; -Engine Work, Rh, Lh | 1 |
| 20***38 | Lamp-Halogen; (12/24-Volt, 35-Watt) | 1 |
277-0467 Lamp Gp-Flood -Hid
| 13***00 | Clip; (Tab) | 2 |
| 19***68 | Lamp Group-Signal; -Turn | 4 |
| 27***77 | Washer-Hard; (11x18.5x15-mm Thk) | 8 |
210-8426 Lamp Gp-Head -High Beam
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***58 | Tube-Flash; (3 Prong Connection)(Warning Beacon) | 1 |
| 19***15 | Tube-Flash; (8 Prong Connection)(Warning Beacon) | 1 |
161-3509 Lamp Gp-Head -Low Beam
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***09 | Lamp Group-Head; -Low Beam | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
157-0305 Lamp Gp-Head -High Beam
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***05 | Lamp Group-Head; -High Beam | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
210-8425 Lamp Gp-Head -Low Beam
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 21***25 | Lamp Group-Head; -Low Beam | 1 |
199-3368 Lamp Gp-Signal
| 11***63 | Lamp Group-Warning Beacon; -Strobe Light | 1 |
| 19***68 | Lamp Group-Signal; -Turn | 1 |
| 5P***39 | Grommet | 1 |
135-0426 Lamp Gp-Signal -Stop, Tail
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***26 | Lamp Group-Signal; (24-Volt, Stop, Tail)(Stop/Tail) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
334-8049 Lamp Gp-Signal -Stop, Tail
| 21***22 | Lamp Group-Flood; -24-Volt, 35-Watt, Hid | 4 |
| 24***52 | Bracket As | 4 |
| 33***49 | Lamp Group-Signal; -Stop, Tail | 1 |
266-8966 Lamp Gp-Signal -Turn
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***12 | Switch Group-Toggle; -Secondary Shutdown | 1 |
334-5410 Lamp Gp-Signal -Turn
| 11***17 | Bracket | 1 |
| 14***88 | Bracket As | 4 |
| 14***19 | Lamp Group-Flood; -Engine Work, Rh, Lh | 4 |
284-3757 Lamp Gp-Warning Beacon -Amber, Strobe
| 21***22 | Lamp Group-Flood; -24-Volt, 35-Watt, Hid | 2 |
| 24***52 | Bracket As | 2 |
| 28***57 | Lamp Group-Warning Beacon; -Amber, Strobe | 1 |
110-7563 Lamp Gp-Warning Beacon -Strobe Light
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***63 | Lamp Group-Warning Beacon; -Strobe Light | 1 |
| 11***17 | Bracket | 1 |
338-1132 Lamp Gp-Warning Beacon -Amber, Strobe
| 14***88 | Bracket As | 2 |
| 14***19 | Lamp Group-Flood; -Engine Work, Rh, Lh | 2 |
| 33***32 | Lamp Group-Warning Beacon; -Amber, Strobe | 1 |
235-3937 Lamp Gp-Warning Beacon -Amber, Rotating
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***00 | Clip; (Tab) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
283-0756 Lamp Gp-Warning Beacon
| 11***17 | Bracket | 1 |
| 14***88 | Bracket As | 2 |
| 14***19 | Lamp Group-Flood; -Engine Work, Rh, Lh | 2 |
266-8969 Lighting Gp-Flood -Operator Platform
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***00 | Clip; (Tab) | 2 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
266-8971 Lighting Gp-Flood -Front Frame
| 17***80 | Lamp Group-Flood; -Cab Front, Cab Rear | 6 |
| 26***71 | Lighting Group-Flood; -Front Frame | 1 |
| 28***02 | Bracket, Balancer Shaft Gear | 2 |
266-8960 Lighting Gp-Flood -Engine Enclosure, Lh
| 13***51 | Spacer; (11x19x6-mm Thk) | 4 |
| 21***22 | Lamp Group-Flood; -24-Volt, 35-Watt, Hid | 2 |
| 24***52 | Bracket As | 2 |
266-8970 Lighting Gp-Flood -Operator Platform
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***17 | Bracket | 1 |
| 13***00 | Clip; (Tab) | 2 |
266-8979 Lighting Gp-Flood -Front Frame
| 26***79 | Lighting Group-Flood; -Front Frame | 1 |
| 28***57 | Lamp Group-Warning Beacon; -Amber, Strobe | 1 |
| 32***92 | Support Group-Light | 1 |
266-8977 Lighting Gp-Flood -Engine Enclosure
| 13***51 | Spacer; (11x19x6-mm Thk) | 4 |
| 21***25 | Lamp Group-Head; -Low Beam | 2 |
| 21***26 | Lamp Group-Head; -High Beam | 2 |
266-8972 Lighting Gp-Flood -Front Frame
| 26***72 | Lighting Group-Flood; -Front Frame | 1 |
| 27***67 | Lamp Group-Flood; -Hid | 6 |
| 28***02 | Bracket, Balancer Shaft Gear | 2 |
266-8980 Lighting Gp-Flood -Front Frame
| 10***73 | Clip | 1 |
| 13***29 | Clip | 1 |
| 22***11 | Tube | 1 |
266-8967 Lighting Gp-Flood -Front Frame, Rear
| 11***17 | Bracket | 1 |
| 14***88 | Bracket As | 2 |
| 14***19 | Lamp Group-Flood; -Engine Work, Rh, Lh | 2 |
282-0810 Lighting Gp-Flood
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 28***10 | Lighting Group-Flood | 1 |
| 9W***52 | Pin-Connector; (14-Ga To 16-Ga) | 2 |
266-8968 Lighting Gp-Flood -Front Frame, Rear
| 21***22 | Lamp Group-Flood; -24-Volt, 35-Watt, Hid | 2 |
| 24***52 | Bracket As | 2 |
| 26***68 | Lighting Group-Flood; -Front Frame, Rear | 1 |
282-0811 Lighting Gp-Flood
| 23***52 | Film-Warning; (Laser Transmitter) | 3 |
| 25***44 | Film-Warning; (Blade, Do Not Climb, Read Omm) | 1 |
| 28***11 | Lighting Group-Flood | 1 |
273-7357 Lighting Gp-Flood -Operator Platform
| 22***33 | Mast Group; -Laser Receiver | 1 |
| 23***70 | Mounting Group-Receiver; -Mast | 1 |
| 27***57 | Lighting Group-Flood; -Operator Platform | 1 |
266-8976 Lighting Gp-Flood -Engine Enclosure
| 11***17 | Bracket | 1 |
| 14***88 | Bracket As | 4 |
| 15***05 | Lamp Group-Head; -High Beam | 2 |
273-7356 Lighting Gp-Flood -Operator Platform
| 24***47 | Kit-Adapter; (Mast)(Grade Control) | 1 |
| 25***79 | Screw As | 1 |
| 25***80 | Motor As | 1 |
266-8974 Lighting Gp-Roading -Front Frame
| 23***32 | Mount-Flexible | 4 |
| 23***33 | Gasket | 2 |
| 23***34 | Clamp | 1 |
266-8973 Lighting Gp-Roading -Front Frame
| 23***49 | Cable-Coiled; (Mast) | 1 |
| 24***96 | Riser As; (Mast) | 1 |
| 24***03 | Bracket Group-Mounting | 1 |
331-1592 Lighting Gp-Warning Beacon
| 16***93 | Adapter | 1 |
| 1T***20 | Bolt-12 Point Head; (3/8-16x1.25-In) | 1 |
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
309-8579 Lines Gp-Alternator Air
| 11***73 | Screw-Button Head; (10-32x0.75-In) | 8 |
| 11***34 | Switch Group-Magnetic; -Start Relay | 2 |
| 13***00 | Clip; (Tab) | 3 |
226-2333 Mast Gp -Laser Receiver
| 11***73 | Screw-Button Head; (10-32x0.75-In) | 8 |
| 11***34 | Switch Group-Magnetic; -Start Relay | 2 |
| 13***00 | Clip; (Tab) | 3 |
292-0281 Mast Gp -Laser Receiver
| 11***73 | Screw-Button Head; (10-32x0.75-In) | 8 |
| 11***34 | Switch Group-Magnetic; -Start Relay | 2 |
| 13***00 | Clip; (Tab) | 3 |
170-5335 Motor Gp-Electric -Circulating Fan
| 11***99 | Strip-Terminal | 1 |
| 12***71 | Fuse; (20-Ampere) | 1 |
| 12***06 | Fuse; (25-Ampere) | 1 |
292-0302 Mounting Gp-Mast -Laser Receiver
| 29***02 | Mounting Group-Mast; -Laser Receiver | 1 |
| 33***66 | Software Group-Communication; (Product Link 121sr) | 1 |
292-0908 Mounting Gp-Mast -Laser Receiver
| 23***87 | Case-Plastic | 1 |
| 29***81 | Mast Group; -Laser Receiver | 1 |
| 29***85 | Receiver Group-Laser; -Accugrade, Dual | 1 |
234-9970 Mounting Gp-Receiver -Mast
| 22***33 | Mast Group; -Laser Receiver | 2 |
| 23***49 | Cable-Coiled; (Mast) | 2 |
| 23***70 | Mounting Group-Receiver; -Mast | 3 |
260-0266 Mounting Gp-Sensor -Atmospheric Air, Engine Oil
| 24***02 | Riser; (Angle) | 1 |
| 26***66 | Mounting Group-Sensor; -Atmospheric Air, Engine Oil | 1 |
| 27***73 | Mast As; (Grade Control) | 1 |
270-4330 Panel Gp-Circuit Breaker
| 11***93 | Lockwasher | 5 |
| 25***28 | Mounting Group-Receiver; -Target | 2 |
| 25***39 | Case-Plastic; (Receiver) | 1 |
272-8019 Panel Gp-Circuit Breaker
| 11***93 | Lockwasher | 5 |
| 25***28 | Mounting Group-Receiver; -Target | 1 |
| 25***39 | Case-Plastic; (Receiver) | 1 |
336-3545 Radio Gp-Communication -Product Link 121sr
| 09***37 | Spacer; (12-mm Thk) | 4 |
| 11***58 | Bearing | 4 |
| 12***08 | Spring | 2 |
263-9088 Radio Gp-Communication -Product Link 121sr
| 24***14 | Sensor Group-Position; (Blade Rotation) | 1 |
| 25***72 | Kit-Bracket | 1 |
| 25***41 | Bracket As-Sensor | 1 |
292-0301 Receiver Ar-Laser -Accugrade, Single
| 06***65 | Bolt; (1/2-13x1.25-In) | 2 |
| 18***59 | Clip | 1 |
| 24***89 | Sensor & Mounting Group; -Cross Slope | 1 |
292-0310 Receiver Ar-Laser -Accugrade, Dual
| 24***84 | Fastener Group-Sensor; -Sonic | 2 |
| 24***93 | Case-Plastic | 1 |
| 24***92 | Sensor Group-Sonic | 1 |
292-7972 Receiver Ar-Satellite -Accugrade, Dual Gnss, Ms992
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 13***70 | Spacer Assem. | 1 |
| 1W***48 | Dowel | 2 |
292-7971 Receiver Ar-Satellite -Accugrade, Single Gnss, Ms992
| 24***84 | Fastener Group-Sensor; -Sonic | 2 |
| 24***93 | Case-Plastic | 1 |
| 24***92 | Sensor Group-Sonic | 2 |
292-0285 Receiver Gp-Laser -Accugrade, Dual
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
| 29***85 | Receiver Group-Laser; -Accugrade, Dual | 1 |
292-0292 Receiver Gp-Satellite -Accugrade, Single Gnss, Ms992
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 29***92 | Receiver Group-Satellite; -Accugrade, Single Gnss, Ms992 | 1 |
292-0291 Receiver Gp-Satellite -Accugrade, Dual Gnss, Ms992
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 17***82 | Clamp | 1 |
249-7789 Sensor & Mounting Gp
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
| 24***89 | Sensor & Mounting Group; -Cross Slope | 1 |
276-8491 Sensor & Mtg Gp-Position
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
| 27***91 | Sensor & Mtg Group-Position; -Variable Blade Float | 1 |
262-2019 Sensor Ar-Grade -Dual Sonic
| 19***25 | Sensor Group-Pressure; -Engine Oil | 1 |
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
| 26***19 | Sensor Ar-Grade; -Dual Sonic | 1 |
262-2017 Sensor Ar-Grade
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 26***17 | Sensor Ar-Grade | 1 |
| 9X***13 | Sleeve (Order By cm)(Use As Required) | 0 |
262-2018 Sensor Ar-Grade -Single Sonic
| 19***22 | Sensor Group-Pressure; -Atmospheric Air | 1 |
| 26***18 | Sensor Ar-Grade; -Single Sonic | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 1 |
231-1973 Sensor Gp-Engine
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 3 |
| 23***73 | Sensor Group-Engine | 1 |
124-9325 Sensor Gp-Fuel Level
| 12***25 | Sensor Group-Fuel Level; -Ultrasonic | 1 |
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
| 23***78 | Sensor Group-Pressure; -Air Inlet Manifold | 1 |
198-8372 Sensor Gp-Position
| 09***36 | Pin-Cotter | 1 |
| 19***72 | Sensor Group-Position; -Truck Body Position | 1 |
| 1B***78 | Nut,Plain,Hexagon Rod To Lever Uoc:Bsv,Bsx | 2 |
219-2392 Sensor Gp-Position
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***49 | Strap; (Marker) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
239-2395 Sensor Gp-Pressure
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 23***95 | Sensor Group-Pressure; -Atmospheric Air | 1 |
239-2396 Sensor Gp-Pressure
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***43 | Sleeve; (2.8-Dm) | 0 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
194-6722 Sensor Gp-Pressure
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***61 | Bracket | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
237-0957 Sensor Gp-Pressure
| 20***17 | Sensor Group-Speed; -Timing, Camshaft | 1 |
| 22***47 | Seal-O-Ring | 1 |
| 23***57 | Sensor Group-Pressure | 1 |
239-5674 Sensor Gp-Pressure
| 23***80 | Seal-O-Ring | 1 |
| 23***74 | Sensor Group-Pressure; -Air Inlet Manifold | 1 |
| 25***53 | Sensor As-Temperature; (Torque Converter Outlet Oil) | 1 |
239-3478 Sensor Gp-Pressure
| 15***43 | Sleeve; (2.8-Dm) | 0 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 2 |
194-6725 Sensor Gp-Pressure
| 13***45 | Pad; (Connector) | 1 |
| 19***03 | Sensor Group-Speed | 1 |
| 19***25 | Sensor Group-Pressure; -Engine Oil | 1 |
249-7792 Sensor Gp-Sonic
214-2484 Sensor Gp-Speed
| 13***17 | Cap As-Dust | 1 |
| 21***84 | Sensor Group-Speed; -Timing, Crankshaft | 1 |
| 24***13 | Element As-Jacket Water Heater; (240-Volt, 1500-Watt) | 1 |
239-5928 Sensor Gp-Speed
| 03***07 | Terminal-Ring; (0-Ga, 3/8-In Screw) | 1 |
| 18***93 | Cable As-Starting Motor | 1 |
| 1M***86 | Terminal-Ring; (0-Ga, 1/2-In Screw) | 1 |
201-6617 Sensor Gp-Speed
| 20***17 | Sensor Group-Speed; -Timing, Camshaft | 1 |
| 23***34 | Fitting As | 1 |
| 23***45 | Nut-Sleeve; (5/16-24-Thd) | 1 |
196-1185 Sensor Gp-Speed
| 13***45 | Pad; (Connector) | 1 |
| 19***85 | Sensor Group-Speed; -Transmission Output | 1 |
| 26***97 | Sensor Group-Temperature; (Air Inlet Manifold) | 1 |
134-2252 Sensor Gp-Temperature -Transmission Oil
| 03***21 | Shim Lever Housing | 1 |
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
| 0S***97 | Capscrew (1/4 - 28 Nf X 1 Gd8, Hex) | 13 |
274-7395 Sensor Gp-Temperature
| 17***08 | Switch Group-Magnetic; -24-Volt-Start Relay-Main Relay | 1 |
| 17***09 | Switch Group-Magnetic; -24-Volt-Start Relay | 1 |
| 27***95 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
191-6587 Sensor Gp-Temperature
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 19***87 | Sensor Group-Temperature; -High Pressure Oil | 1 |
145-7028 Sensor Gp-Temperature
| 14***28 | Sensor Group-Temperature; -Hydraulic Oil Temp | 1 |
| 22***71 | Bolt-12 Point Head; (M16x2x45-mm) | 3 |
| 23***62 | Starting Motor Group-Electric | 1 |
274-7396 Sensor Gp-Temperature
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
234-5013 Sensor Gp-Temperature
| 23***13 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
253-3997 Starting Aid Gp-Ether
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***81 | Switch As-Magnetic; (Start Relay) | 1 |
267-5505 Starting Ar-Cold Weather
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 26***05 | Starting Ar-Cold Weather | 1 |
| 3F***56 | Lockwasher; (8.43x15.5x0.76mm Thk) | 2 |
308-6784 Starting Motor Gp-Electric
| 27***40 | Switch As-Rocker; (Engine Compression Brake) | 1 |
| 30***84 | Starting Motor Group-Electric | 1 |
209-8423 Starting Motor Gp-Electric
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 20***23 | Starting Motor Group-Electric; -Heavy-Duty | 1 |
237-1962 Starting Motor Gp-Electric
| 14***36 | Pin-Connector; (14-Ga To 18-Ga) | 2 |
| 23***11 | Plug As-Connector; (2-Pin) | 1 |
| 23***62 | Starting Motor Group-Electric | 1 |
338-3454 Starting Motor Gp-Electric
| 24***74 | Switch As-Rocker; (Stairway Access Lights) | 1 |
| 33***54 | Starting Motor Group-Electric | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
| 2H***20 | Lockwasher (11.38mm Id) | 1 |
164-7577 Switch Gp-Bypass
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***86 | Wiper Switch Assembly; (24-Volt)(Front/Intermittent) | 1 |
| 16***77 | Switch Group-Bypass; -Xmsn Lubrication Supply Filter-Xmsn Lubrication Charge Filter-Hoist Screen-Tc, Front Brake Cooling-Transmission Oil Filter-Rear Axle Oil Filter | 1 |
209-5582 Switch Gp-Magnetic
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 41 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
118-3534 Switch Gp-Magnetic
| 01***16 | Setscrew; (8-32x0.5-In) | 1 |
| 11***34 | Switch Group-Magnetic; -Start Relay | 1 |
| 27***41 | Switch Group-Wiper; -Intermittent-Front, Rear | 1 |
241-8368 Switch Gp-Magnetic
| 09***42 | Screw; (Machine) (M6x1.0x16mm) | 2 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 41 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
175-2308 Switch Gp-Magnetic
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***08 | Switch Group-Magnetic; -24-Volt-Start Relay-Main Relay | 1 |
| 35***89 | Filter; (Ether Start) | 1 |
175-2309 Switch Gp-Magnetic
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***00 | Clip; (Tab) | 2 |
| 17***09 | Switch Group-Magnetic; -24-Volt-Start Relay | 1 |
275-1253 Switch Gp-Pressure
| 25***60 | Camera Group; (115-Deg, Color)(Rear View) | 1 |
| 25***62 | Kit-Bracket; (Camera) | 1 |
| 25***43 | Connector Group-Electronic; (Work Area Visual System) | 1 |
278-0685 Switch Gp-Rocker -Engine Brake
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 3 |
| 0S***76 | Bolt 5.08 cm(2 In.) Long | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
281-1668 Switch Gp-Rocker -Cab Access
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 3 |
| 0S***76 | Bolt 5.08 cm(2 In.) Long | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
275-7764 Switch Gp-Wiper -Intermittent
| 03***48 | Clip; (11.11mm .437in Id) | 10 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 8 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
275-7741 Switch Gp-Wiper -Intermittent
| 03***48 | Clip; (11.11mm .437in Id) | 10 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***08 | Clip | 2 |
3e-0155 Switch Gp-Wiper -Intermittent
| 03***48 | Clip; (11.11mm .437in Id) | 10 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***08 | Clip | 2 |
256-2907 Target Gp-Laser
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 13***40 | Resistor As-Connection; (3-Pin) | 1 |
| 25***07 | Target Group-Laser | 1 |
295-9880 Target Gp-Laser
| 13***00 | Clip; (Tab) | 3 |
| 13***40 | Resistor As-Connection; (3-Pin) | 1 |
| 18***59 | Clip | 1 |
239-1134 Valve Gp-Ether Starting
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 6 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
266-8965 Warning Gp-Backup
| 09***17 | Washer, Spring; (Spring) | 2 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***74 | Cover-Connector; (Wire Router) | 1 |
266-7006 Wiring Gp-Cab
| 03***32 | Rod End | 1 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 16 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
267-5504 Wiring Gp-Camera -Work Area Visual System
| 03***32 | Rod End | 1 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 16 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 3 |
315-0498 Wiring Gp-Engine Electronic -Electronic Control
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***00 | Clip; (Tab) | 6 |
| 13***26 | Lamp Group-Signal; (24-Volt, Stop, Tail)(Stop/Tail) | 2 |
233-6216 Wiring Gp-Engine Electronic
| 03***32 | Rod End | 1 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 16 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 3 |
266-8956 Wiring Gp-Front
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
266-7026 Wiring Gp-Grade Control
| 16***77 | Switch Group-Bypass; -Xmsn Lubrication Supply Filter-Xmsn Lubrication Charge Filter-Hoist Screen-Tc, Front Brake Cooling-Transmission Oil Filter-Rear Axle Oil Filter | 1 |
| 26***26 | Wiring Group-Grade Control | 1 |
| 33***79 | Spring | 1 |
266-8961 Wiring Gp-Grade Control
| 26***61 | Wiring Group-Grade Control | 1 |
| 27***86 | Cap-Bearing | 1 |
| 27***87 | Cap-Bearing | 1 |
253-1967 Wiring Gp-Monitor
| 25***67 | Wiring Group-Monitor; -Cd610 Display | 1 |
| 26***20 | Chain | 4 |
| 26***21 | Link As-Connecting | 1 |
253-1964 Wiring Gp-Monitor
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 2 |
| 1A***23 | Dowel (1" Long) | 2 |
| 1U***46 | Sealant (For Locations A) | 0 |
266-8963 Wiring Gp-Rear -Sensors
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 1 |
| 13***00 | Clip; (Tab) | 5 |
| 13***89 | Clip; (Ladder) | 11 |
266-8962 Wiring Gp-Rear -Circuit Breaker Panel
| 11***49 | Fitting As; (Quick Disconnect) | 1 |
| 12***09 | Elbow | 1 |
| 13***45 | Seal Kit; (Includes Parts Marked J) | 1 |
266-8964 Wiring Gp-Rear Lighting
| 11***27 | Housing | 2 |
| 11***42 | Retainer | 2 |
| 11***43 | Shim Pack; (Includes 17-Shims) | 2 |
Engine Arrangement
276-1430 Engine Ar-Complete
| 26***60 | Engine Ar-Complete | 1 |
| 27***30 | Engine Ar-Complete | 1 |
| 27***85 | Switch Group-Rocker; -Engine Brake | 1 |
215-7486 Engine Ar-Complete
| 10***36 | Cover Group-Cylinder Block; -Remote | 1 |
| 10***82 | Fastener Group-Front Housing | 1 |
| 10***73 | Fastener Group-Water Pump; (Water Pump Cover) | 1 |
263-7760 Engine Ar-Complete
| 10***36 | Cover Group-Cylinder Block; -Remote | 1 |
| 10***82 | Fastener Group-Front Housing | 1 |
| 10***73 | Fastener Group-Water Pump; (Water Pump Cover) | 1 |
241-5934 Engine Ar-Core
| 20***49 | Gear Group-Front | 1 |
| 22***41 | Piston & Rod Group | 6 |
| 22***32 | Crankshaft Group | 1 |
316-3531 Engine Ar-Core
| 20***49 | Gear Group-Front | 1 |
| 22***41 | Piston & Rod Group | 6 |
| 22***32 | Crankshaft Group | 1 |
314-8601 Engine Ar-Core
| 10***57 | Fastener Group-Valve Mechanism | 1 |
| 19***09 | Mechanism Group-Fuel Pump & Valve | 1 |
| 20***49 | Gear Group-Front | 1 |
Frame And Body
265-4505 Axle Ar-Front
| 11***21 | Lug; (M10x1.5-Thd) | 10 |
| 26***05 | Axle Ar-Front | 1 |
| 30***86 | Support As | 1 |
266-5908 Axle Gp-Front
| 26***08 | Axle Group-Front | 1 |
| 28***37 | Plate As | 2 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 12 |
270-9113 Cover Gp-Control Valve
| 11***36 | Seal; (124.5-cm Each) | 0 |
| 26***90 | Sheet As | 1 |
| 27***13 | Cover Group-Control Valve | 1 |
344-0054 Cover Gp-Protection
| 14***29 | Clamp | 4 |
| 28***89 | Plate As | 1 |
| 34***54 | Cover Group-Protection | 1 |
222-9025 Enclosure Ar-Engine -Engine
| 16***25 | Lanyard | 1 |
| 22***25 | Enclosure Ar-Engine; -Engine | 1 |
| 27***80 | Handrail As | 1 |
274-8550 Enclosure Gp-Engine
| 27***50 | Enclosure Group-Engine | 1 |
| 27***40 | Handhold | 1 |
| 28***67 | Handhold | 1 |
279-5619 Fastener Gp-Platform
| 11***22 | Plate | 1 |
| 11***23 | Spacer; (133.337x107.98x62.09-mm Thk) | 1 |
| 11***24 | Plate | 1 |
248-1484 Fastener Gp-Sensor
| 11***22 | Plate | 1 |
| 11***23 | Spacer; (133.337x107.98x62.09-mm Thk) | 1 |
| 11***24 | Plate | 1 |
266-2418 Fender & Support Gp
| 00***39 | Adapter-Pipe | 1 |
| 1S***94 | Clip-R.H. Side Engine Support | 4 |
| 26***18 | Fender & Support Group | 1 |
223-7566 Frame Gp-Front
| 09***81 | Spacer; (10.5x20x10.0mm Thk) | 3 |
| 22***66 | Frame Group-Front | 1 |
| 28***20 | Hose As | 2 |
224-0781 Frame Gp-Rear
| 22***81 | Frame Group-Rear | 1 |
| 27***63 | Hose As | 1 |
| 28***62 | Hose As | 1 |
266-6778 Guard Gp-Bottom
| 11***64 | Tie Rod | 1 |
| 12***25 | Clamp As | 2 |
| 22***05 | Stud-Ball | 1 |
306-8083 Guard Gp-Bottom
| 15***17 | Link | 1 |
| 30***83 | Guard Group-Bottom | 1 |
| 31***94 | Pin As | 2 |
292-9151 Guard Gp-Brake
| 08***56 | 90 Degrees Elbow | 1 |
| 12***08 | Spacer; (10.31x17.45x50.8-mm Thk) | 4 |
| 14***02 | Plate | 2 |
303-8193 Guard Gp-Mud
| 10***45 | Clip | 1 |
| 1F***54 | Spacer; (11.01x19.05x49.21-mm Thk) | 2 |
| 27***12 | Valve Group-Bank 5; -Lh | 1 |
266-6777 Guard Gp-Radiator
| 03***77 | Tee-Pipe | 1 |
| 11***99 | Nipple-Pipe | 1 |
| 13***00 | Clip; (Tab) | 2 |
281-4290 Guard Gp-Rock
| 28***90 | Planet Carrier; Planetary Carrier, Guard Group-Rock | 1 |
| 31***70 | Reflector; (Amber)(Amber) | 10 |
| 31***71 | Reflector; (Red) | 2 |
278-3541 Handrail Gp
| 10***08 | Bumper; (Conical) | 4 |
| 13***22 | Bushing | 8 |
| 27***82 | Bracket As | 8 |
309-5052 Handrail Gp -Rear
| 10***08 | Bumper; (Conical) | 4 |
| 13***22 | Bushing | 8 |
| 19***82 | Spacer; (8.5x12.7x38.2-mm Thk) | 4 |
270-6971 Handrail Gp
| 27***71 | Handrail Group | 1 |
| 27***62 | Shield | 1 |
| 27***98 | Plate | 4 |
252-0981 Hitch Gp-Articulating
| 11***29 | Tube | 2 |
| 12***57 | Rod End | 4 |
| 14***43 | Support-Step; (Rubber)(Step Access) | 2 |
268-0248 Lines Gp-Automatic Lubrication -Front Axle
| 13***22 | Bushing | 2 |
| 19***78 | Washer-Hard; (13.5x30x12-mm Thk) | 2 |
| 26***48 | Lines Group-Automatic Lubrication; -Front Axle | 1 |
270-7885 Lines Gp-Automatic Lubrication -Cshift/Lift Cyl, Moldboard
| 1D***89 | Bolt (1.75" Long) | 4 |
| 1K***72 | Locknut Horn To Guard | 4 |
| 27***85 | Lines Group-Automatic Lubrication; -Cshift/Lift Cyl, Moldboard | 1 |
270-7886 Lines Gp-Automatic Lubrication -Art Cyl, Hitch, Ripper
| 27***86 | Lines Group-Automatic Lubrication; -Art Cyl, Hitch, Ripper | 1 |
| 27***02 | Step Group | 1 |
| 27***62 | Step Group | 1 |
266-9705 Link Gp-Steering
| 26***05 | Link Group-Steering | 1 |
| 27***02 | Step Group | 1 |
| 27***62 | Step Group | 1 |
134-2573 Link Gp-Steering Frame Lock
| 13***73 | Link Group-Steering Frame Lock | 1 |
| 27***33 | Plate As | 1 |
| 27***34 | Plate As | 1 |
268-0247 Lubrication Ar-Automatic
| 11***21 | Lug; (M10x1.5-Thd) | 2 |
| 26***47 | Lubrication Ar-Automatic | 1 |
| 30***89 | Plate As | 2 |
253-9017 Mounting Gp-Valve -Implement
| 11***21 | Lug; (M10x1.5-Thd) | 12 |
| 25***17 | Mounting Group-Valve; -Implement | 1 |
| 30***89 | Plate As | 2 |
283-2119 Pump Gp-Lubrication
| 17***31 | Connector As | 1 |
| 26***53 | Valve As-Lube Distribution; (5-Injector) | 1 |
| 28***19 | Pump Group-Lubrication | 1 |
313-6666 Reflector Gp
| 16***25 | Elbow As | 1 |
| 26***53 | Valve As-Lube Distribution; (5-Injector) | 1 |
| 2D***83 | Fitting | 5 |
275-0561 Shield Gp-Heat
| 26***46 | Injector As-Grease; (2-Injector) | 1 |
| 27***61 | Shield Group-Heat | 1 |
| 2D***83 | Fitting | 2 |
306-5427 Step Gp -Rh
| 14***67 | Elbow Group; (Each Includes) | 1 |
| 20***59 | Connector As | 1 |
| 26***52 | Valve As-Lube Distribution; (4-Injector) | 1 |
271-0752 Step Gp -Lh
| 17***31 | Connector As | 1 |
| 27***52 | Step Group; -Lh | 1 |
| 29***86 | Injector As | 1 |
305-2414 Step Gp
| 00***83 | Nipple-Pipe; (Hexagon) | 1 |
| 26***52 | Valve As-Lube Distribution; (4-Injector) | 1 |
| 2D***83 | Fitting | 8 |
278-8762 Step Gp
| 00***83 | Nipple-Pipe; (Hexagon) | 1 |
| 26***53 | Valve As-Lube Distribution; (5-Injector) | 1 |
| 27***62 | Step Group | 1 |
278-7102 Step Gp
| 26***46 | Injector As-Grease; (2-Injector) | 1 |
| 27***02 | Step Group | 1 |
| 2D***83 | Fitting | 2 |
266-2417 Step Gp -Rear
| 16***25 | Elbow As | 1 |
| 17***31 | Connector As | 1 |
| 26***17 | Step Group; -Rear | 1 |
306-5426 Step Gp -Lh
| 16***25 | Elbow As | 1 |
| 26***53 | Valve As-Lube Distribution; (5-Injector) | 1 |
| 2D***83 | Fitting | 5 |
270-6978 Support Gp-Platform
| 26***43 | Elbow As | 1 |
| 27***78 | Support Group-Platform | 1 |
| 29***86 | Injector As | 1 |
307-9336 Suppression Gp-Sound -Rear Frame
| 00***83 | Nipple-Pipe; (Hexagon) | 1 |
| 29***86 | Injector As | 1 |
| 2D***83 | Fitting | 6 |
299-2266 Valve Gp-Lube Distribution -6-Injector
| 11***58 | Hose As | 1 |
| 11***74 | Bolt; (L=20mm) | 1 |
| 13***52 | Tee-Union | 1 |
296-3364 Valve Gp-Lube Distribution -5-Injector
| 0S***30 | Pin (Part Of 2s***65 Assem.) | 4 |
| 11***06 | Spindle | 1 |
| 11***08 | Cover | 1 |
296-3368 Valve Gp-Lube Distribution -6-Injector
| 01***80 | Lockwasher | 8 |
| 1T***16 | Bolt; (5/16-18x0.75-In)(12 Point Hd) | 4 |
| 1V***95 | Coupling | 1 |
296-3369 Valve Gp-Lube Distribution -2-Injector
| 29***69 | Valve Group-Lube Distribution; -2-Injector | 1 |
| 2G***02 | Spring | 2 |
| 2G***82 | Base | 1 |
296-3363 Valve Gp-Lube Distribution -5-Injector
| 0S***30 | Pin (Part Of 2s***65 Assem.) | 4 |
| 11***06 | Spindle | 1 |
| 11***08 | Cover | 1 |
296-3365 Valve Gp-Lube Distribution -2-Injector
| 12***09 | Fastener Group-Brake | 1 |
| 27***21 | Brake Group-Service & Parking; -Front Tandem | 2 |
| 27***22 | Brake Group-Service & Parking; -Rear Tandem | 2 |
299-2263 Valve Gp-Lube Distribution -5-Injector
| 17***93 | Kit-Seal; (Hydraulic Accumulator) | 1 |
| 19***50 | Core | 1 |
| 22***67 | Valve Group-Accumulator Charging | 1 |
299-2264 Valve Gp-Lube Distribution -4-Injector
| 13***98 | Spring | 1 |
| 16***77 | Switch Group-Bypass; -Xmsn Lubrication Supply Filter-Xmsn Lubrication Charge Filter-Hoist Screen-Tc, Front Brake Cooling-Transmission Oil Filter-Rear Axle Oil Filter | 1 |
| 29***64 | Valve Group-Lube Distribution; -4-Injector | 1 |
299-2265 Valve Gp-Lube Distribution -6-Injector
| 13***98 | Spring | 1 |
| 16***77 | Switch Group-Bypass; -Xmsn Lubrication Supply Filter-Xmsn Lubrication Charge Filter-Hoist Screen-Tc, Front Brake Cooling-Transmission Oil Filter-Rear Axle Oil Filter | 1 |
| 29***65 | Valve Group-Lube Distribution; -6-Injector | 1 |
299-2262 Valve Gp-Lube Distribution -4-Injector
| 17***93 | Kit-Seal; (Hydraulic Accumulator) | 1 |
| 19***50 | Core | 1 |
| 22***67 | Valve Group-Accumulator Charging | 1 |
296-3370 Valve Gp-Lube Distribution -5-Injector
| 0S***29 | Bolt (1" Long) | 6 |
| 21***35 | Accumulator Group-Blade Cushion; -Charged | 2 |
| 29***70 | Valve Group-Lube Distribution; -5-Injector | 1 |
296-3366 Valve Gp-Lube Distribution -4-Injector
| 06***45 | Clip | 2 |
| 11***98 | Boot | 1 |
| 11***99 | Kit-Seal; (Brake Valve)(Service Brake Valve) | 1 |
296-3367 Valve Gp-Lube Distribution -3-Injector
| 29***67 | Valve Group-Lube Distribution; -3-Injector | 1 |
| 5D***23 | Seal (26.94" Inside Diameter) | 4 |
| 6V***37 | Plain Washer - Hardened | 120 |
Fuel System
275-7664 Filter & Mtg Gp-Fuel
| 22***78 | Seal-Ring; (Fuel And Water Sep Filter) | 1 |
| 27***64 | Filter & Mtg Group-Fuel | 1 |
| 32***44 | Filter As-Water Sep & Fuel; (Primary) | 1 |
275-7667 Filter Gp-Fuel
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 14***18 | Connector As | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
174-9570 Filter Gp-Water Sep & Fuel -Primary
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 1 |
| 03***42 | Seal-O-Ring; (11.89mm Id) | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
275-7666 Lines Gp-Fuel
| 10***72 | Spacer; (9.8x15.85x37.6-mm Thk) | 1 |
| 23***28 | Seal-O-Ring; (32.99mm Id) | 1 |
| 23***75 | Seal-O-Ring; (36.09mm Id) | 1 |
253-3995 Lines Gp-Fuel
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 1 |
| 03***42 | Seal-O-Ring; (11.89mm Id) | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
193-7404 Manifold Gp-Fuel
| 11***31 | Bracket As | 4 |
| 12***63 | Adapter Group-Fast Fill Fuel; (Auto Shutoff) | 1 |
| 19***04 | Manifold Group-Fuel | 1 |
150-4279 Pump & Mtg Gp-Fuel Transfer -Rear
| 10***97 | Valve-Ball | 2 |
| 12***25 | Sensor Group-Fuel Level; -Ultrasonic | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 4 |
235-1402 Pump Gp-Fuel Injection
| 10***97 | Valve-Ball | 2 |
| 12***25 | Sensor Group-Fuel Level; -Ultrasonic | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 4 |
190-8977 Pump Gp-Fuel Prm & Water Sep
| 19***77 | Pump Group-Fuel Prm & Water Sep; -Primary Fuel Filter | 1 |
| 23***81 | Seal-O-Ring | 1 |
| 28***25 | Valve Group-Check; -Fuel | 1 |
220-3808 Tank Ar-Fuel
| 03***33 | Seal-O-Ring; (12.42mm Id) | 1 |
| 22***08 | Tank Ar-Fuel | 1 |
| 6V***23 | Ring; (Backup) (13.16mm Id) | 1 |
275-0604 Tank Gp-Fuel
| 06***51 | Clamp | 1 |
| 15***20 | Battery; (12-Volt)(12-Volt) | 2 |
| 15***49 | Cable-Electrical; (03050 mm ) | 0 |
281-2725 Valve Gp-Check -Fuel
| 26***27 | Display Group-Camera; -Work Area Visual System | 1 |
| 26***04 | Wiring Group-Camera; -Work Area Visual System | 1 |
| 28***25 | Valve Group-Check; -Fuel | 1 |
233-6742 Valve Gp-Check -Fuel
| 23***42 | Valve Group-Check; -Fuel Filter | 1 |
| 24***03 | Bracket Group-Mounting | 1 |
| 25***44 | Film-Warning; (Blade, Do Not Climb, Read Omm) | 1 |
Hydraulic System
270-7546 Accumulator & Mtg Gp-Hydraulic -Blade Cushion
| 11***89 | Bearing-Sleeve | 1 |
| 12***79 | Head | 1 |
| 13***73 | Piston | 1 |
219-8064 Accumulator Gp-Blade Cushion -Uncharged
| 11***55 | Cylinder As | 1 |
| 11***56 | Rod As | 1 |
| 17***83 | Bolt-Hex Head; (M30x3.5x90mm) | 1 |
219-8035 Accumulator Gp-Blade Cushion -Charged
| 11***30 | Cylinder As | 1 |
| 11***31 | Rod As | 1 |
| 16***08 | Seal As-Buffer | 1 |
352-1941 Accumulator Gp-Hydraulic
| 12***60 | Head | 1 |
| 14***16 | Cylinder As | 1 |
| 14***18 | Rod As | 1 |
342-7817 Base Gp-Oil Filter -Hydraulic
| 10***17 | Washer; (36.7x77x6-mm Thk) | 1 |
| 11***51 | Cylinder As | 1 |
| 11***53 | Rod As | 1 |
249-2304 Base Gp-Oil Filter -Power Train
| 09***79 | Pin-Spring | 1 |
| 10***44 | Grommet | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
253-3960 Cooler Gp-Hydraulic Oil
| 25***60 | Cooler Group-Hydraulic Oil | 1 |
| 26***45 | Drive Group-Circle | 1 |
| 4H***96 | Pin (2" Long) | 1 |
253-9016 Cylinder & Mtg Gp-Articulation
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 7 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 1A***15 | Nut; (23/4x17/8-Thd) | 1 |
140-8444 Cylinder & Mtg Gp-Blade Tip
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 7 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 14***44 | Cylinder & Mtg Group-Blade Tip | 1 |
278-0560 Cylinder & Mtg Gp-Cshft & Lift
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 1A***15 | Nut; (23/4x17/8-Thd) | 1 |
140-8443 Cylinder & Mtg Gp-Sideshift
| 14***43 | Cylinder & Mtg Group-Sideshift | 1 |
| 14***57 | Elbow As. | 1 |
| 15***24 | Hex Head Plug; (-4sae) (D6r Iii) | 2 |
266-9701 Cylinder & Mtg Gp-Steering
| 14***57 | Elbow As. | 1 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 1 |
| 15***24 | Hex Head Plug; (-4sae) (D6r Iii) | 3 |
8x-9016 Cylinder & Mtg Gp-Wheel Lean
| 14***57 | Elbow As. | 1 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 1 |
| 15***24 | Hex Head Plug; (-4sae) (D6r Iii) | 3 |
273-1733 Cylinder Gp-Articulation
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***73 | Switch As-Pressure; (Hydraulic Fan Motor Case Drain) | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
143-5988 Cylinder Gp-Blade Tip
| 13***29 | Seal-O-Ring | 1 |
| 14***88 | Cylinder Group-Blade Tip | 1 |
| 1R***09 | Filter Element-Oil; (Ultra High Efficiency)(Power Train) | 1 |
276-7646 Cylinder Gp-Hydraulic -Blade Lift, Centershift
| 12***09 | Elbow | 1 |
| 13***29 | Seal-O-Ring | 1 |
| 1R***09 | Filter Element-Oil; (Ultra High Efficiency)(Power Train) | 1 |
113-7754 Cylinder Gp-Ripper
| 11***54 | Cylinder Group-Ripper | 1 |
| 13***29 | Seal-O-Ring | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
141-2914 Cylinder Gp-Sideshift
| 13***29 | Seal-O-Ring | 1 |
| 14***14 | Cylinder Group-Sideshift | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 2 |
270-8686 Cylinder Gp-Steering
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 4 |
| 27***86 | Cylinder Group-Steering | 1 |
117-0836 Cylinder Gp-Wheel Lean
| 06***45 | Clip | 2 |
| 11***49 | Valve Group-Flow Divider | 1 |
| 11***03 | Valve Group-Flow Divider | 1 |
252-7065 Drive & Mtg Gp-Circle
| 06***45 | Clip | 5 |
| 10***46 | Hose As | 1 |
| 10***97 | Bar-Clamp | 4 |
265-6741 Drive & Mtg Gp-Circle
| 06***45 | Clip | 5 |
| 10***46 | Hose As | 1 |
| 10***97 | Bar-Clamp | 4 |
268-5745 Drive Gp-Circle
| 06***45 | Clip | 5 |
| 08***02 | Bulkhead Adaptor | 1 |
| 12***88 | Tee | 1 |
265-6742 Drive Gp-Circle
| 11***31 | Hose As | 1 |
| 14***39 | Connector As. | 2 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 3 |
271-0564 Filter & Mtg Gp-Hydraulic
| 06***45 | Clip | 5 |
| 08***02 | Bulkhead Adaptor | 1 |
| 12***08 | Clip | 2 |
287-1511 Filter Gp-Oil -Transmission
| 10***48 | Kit-Seal; (Solenoid Valve)(Pilot Proportioning Valve) | 1 |
| 12***55 | Plug | 1 |
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
341-2079 Filter Gp-Oil -Transmission
| 13***45 | Seal Kit; (Includes Parts Marked J) | 1 |
| 15***56 | Valve Group-Check; -Pilot, Differential Lock Oil | 1 |
| 16***49 | Seal-O-Ring; (12.42mm Id) | 1 |
244-0121 Filter Gp-Oil
| 06***45 | Clip | 2 |
| 12***41 | Tee-Swivel-Orfs | 1 |
| 13***34 | Spacer; (11x20x25-mm Thk) | 1 |
197-1993 Filter Gp-Oil
| 11***99 | Valve Group-Unloading | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 2 |
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 1 |
269-2202 Float Ar-Blade
| 12***40 | Seal-O-Ring | 2 |
| 13***30 | Valve Group-Relief | 1 |
| 15***45 | Elbow | 1 |
253-9006 Lines Gp-Front
| 09***31 | Orifice | 1 |
| 13***45 | Seal Kit; (Includes Parts Marked J) | 1 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 3 |
278-0561 Lines Gp-Hydraulic -Blade Float
| 13***45 | Seal Kit; (Includes Parts Marked J) | 1 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 3 |
| 14***11 | Plug Group | 4 |
253-9032 Lines Gp-Hydraulic
| 13***45 | Seal Kit; (Includes Parts Marked J) | 1 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 3 |
| 14***11 | Plug Group | 4 |
268-0242 Lines Gp-Hydraulic Fan
| 12***70 | Motor Group-Gerotor | 1 |
| 26***42 | Lines Group-Hydraulic Fan | 1 |
| 2H***31 | Packing,Preformed Plate Part Of Kit P/N 4j***80 | 1 |
268-0241 Lines Gp-Pump -Implement
| 12***03 | Link-Drive | 1 |
| 12***04 | Kit-Gerotor | 1 |
| 12***05 | Bolt; (3/8-24x3.8-In) | 7 |
226-1742 Lines Gp-Ripper
| 00***14 | Ring-Retaining; (Internal) | 1 |
| 07***90 | Seal | 4 |
| 07***43 | Plate-Isolation | 2 |
125-5737 Lines Gp-Ripper
| 11***01 | Seal (Rear Pump To Center Pump) | 1 |
| 12***37 | Lines Group-Ripper | 1 |
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 1 |
268-0244 Lines Gp-Secondary Steering
| 11***98 | Pump Group-Gear | 1 |
| 26***44 | Lines Group-Secondary Steering | 1 |
| 3F***92 | Seal-O-Ring | 1 |
344-1108 Lines Gp-Steering
| 11***01 | Seal (Rear Pump To Center Pump) | 1 |
| 26***90 | Pump Group-Piston; -Steering | 1 |
| 26***91 | Pump Group-Piston; -Implement | 1 |
283-9560 Manifold Gp-Control -Parking Brake
| 12***94 | Plug; (Break Off) | 2 |
| 16***97 | Spring | 1 |
| 16***98 | Link-Control | 1 |
306-5134 Manifold Gp-Control -Pilot Shutoff
| 17***44 | Seal-O-Ring | 1 |
| 23***05 | Coupler | 1 |
| 27***68 | Pump Group-Gear; (Differential Lock)(Rear) | 1 |
254-3415 Manifold Gp-Control -Steering
| 00***69 | Cup-Roller Bearing | 1 |
| 00***71 | Cone-Bearing | 1 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
353-2606 Manifold Gp-Control
| 16***78 | Bearing-Spherical | 1 |
| 16***79 | Pin | 3 |
| 16***82 | Washer; (42-mm Odx2.7-mm Thk) | 1 |
272-0984 Manifold Gp-Control -Brake Charge, Hyd Fan Control
| 00***69 | Cup-Roller Bearing | 1 |
| 00***71 | Cone-Bearing | 1 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
292-2034 Manifold Gp-Valve -Inlet
| 29***34 | Manifold Group-Valve; -Inlet | 1 |
| 6E***17 | Plate-Limiter | 2 |
| 6E***18 | Plate-Spacer | 2 |
302-5693 Manifold Gp-Valve -Inlet
| 16***01 | Swashplate Stop | 2 |
| 1H***37 | Pin (Spring) | 2 |
| 30***93 | Manifold Group-Valve; -Inlet | 1 |
292-2035 Manifold Gp-Valve -Inlet
| 16***78 | Bearing-Spherical | 1 |
| 16***79 | Pin | 3 |
| 16***81 | Spring | 1 |
8x-9031 Motor & Mtg Gp-Circle Drive
| 06***45 | Clip | 1 |
| 11***52 | Valve-Breaker Relief; (Hydraulic Tank Relief) | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
121-9270 Motor Gp-Gerotor
| 11***81 | Cover-Hydraulic Cap | 1 |
| 12***70 | Motor Group-Gerotor | 1 |
| 1L***72 | Dowel (Part Of 8s***99 Assem.) | 1 |
268-0238 Pump & Mtg Gp-Piston -Implement, Steering
| 14***11 | Plug Group | 10 |
| 24***62 | Seal-Integral | 6 |
| 24***74 | Rod | 4 |
268-0237 Pump & Mtg Gp-Piston & Gear -Brake, Differential Lock, Hydraulic Fan, Transmission Charge
| 14***11 | Plug Group | 10 |
| 24***62 | Seal-Integral | 6 |
| 24***74 | Rod | 4 |
117-5098 Pump Gp-Gear
| 11***98 | Pump Group-Gear | 1 |
| 14***11 | Plug Group | 10 |
| 24***62 | Seal-Integral | 6 |
124-7636 Pump Gp-Gear
| 12***36 | Pump Group-Gear | 1 |
| 14***11 | Plug Group | 10 |
| 24***62 | Seal-Integral | 6 |
268-4763 Pump Gp-Piston -Implement, Steering
| 16***54 | Seal-O-Ring | 1 |
| 26***63 | Pump Group-Piston; -Implement, Steering | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
291-0061 Pump Gp-Piston -Brake, Hydraulic Fan
| 10***59 | Piston | 1 |
| 13***92 | Bolt; (M6x1x35-mm) | 4 |
| 14***57 | Plug | 6 |
268-6690 Pump Gp-Piston -Steering
| 26***90 | Pump Group-Piston; -Steering | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 6V***97 | Seal (Later Machines And Field Installed) | 1 |
268-6691 Pump Gp-Piston -Implement
| 10***59 | Piston | 1 |
| 13***92 | Bolt; (M6x1x35-mm) | 4 |
| 14***57 | Plug | 6 |
270-2720 Pump Gp-Piston & Gear -Brake, Differential Lock, Hydraulic Fan
| 10***59 | Piston | 1 |
| 13***92 | Bolt; (M6x1x35-mm) | 4 |
| 14***57 | Plug | 6 |
185-0275 Rotating Gp-Motor
| 10***60 | Piston | 2 |
| 13***92 | Bolt; (M6x1x35-mm) | 4 |
| 14***57 | Plug | 6 |
279-2486 Rotating Gp-Pump -Brake, Hydraulic Fan
| 10***59 | Piston | 1 |
| 13***92 | Bolt; (M6x1x35-mm) | 4 |
| 14***57 | Plug | 6 |
6e-4216 Rotating Gp-Pump
| 10***59 | Piston | 1 |
| 13***92 | Bolt; (M6x1x35-mm) | 4 |
| 14***57 | Plug | 6 |
184-1527 Swashplate Gp
| 10***59 | Piston | 1 |
| 13***92 | Bolt; (M6x1x35-mm) | 4 |
| 14***57 | Plug | 6 |
260-6502 Swivel Gp -Circle Drive
| 10***59 | Piston | 1 |
| 13***92 | Bolt; (M6x1x35-mm) | 4 |
| 14***57 | Plug | 6 |
226-1744 Tank & Mtg Gp-Hydraulic -Hydraulic
| 09***51 | Seal-O-Ring (Id=14.00mm) | 1 |
| 16***16 | Ring-Backup | 2 |
| 16***17 | Ring-Backup | 2 |
286-2964 Tank Gp-Hydraulic
| 28***64 | Tank Group-Hydraulic | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
| 5P***99 | Ring-To Clutch Piston Pins | 1 |
270-1613 Valve Gp-Bank 5 -Rh
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 03***36 | Seal-O-Ring | 1 |
| 10***16 | Pin-Spring Stop | 1 |
270-1612 Valve Gp-Bank 5 -Lh
| 27***12 | Valve Group-Bank 5; -Lh | 1 |
| 34***46 | Valve Group-Pressure Reducing | 1 |
158-9956 Valve Gp-Check
| 13***45 | Seal Kit; (Includes Parts Marked J) | 1 |
| 15***56 | Valve Group-Check; -Pilot, Differential Lock Oil | 1 |
| 16***49 | Seal-O-Ring; (12.42mm Id) | 1 |
164-7474 Valve Gp-Check
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 16***49 | Seal-O-Ring; (12.42mm Id) | 1 |
| 16***61 | Ring-Backup | 1 |
276-3654 Valve Gp-Control -Sideshift
| 03***21 | Ring-Back-Up | 1 |
| 16***54 | Seal-O-Ring | 1 |
| 18***91 | Coil As | 1 |
276-3659 Valve Gp-Control -Blade Tip
| 11***42 | Shim Pack; (Includes 8-Shims) | 1 |
| 11***44 | Strip-Wear | 8 |
| 11***45 | Cap | 1 |
276-3661 Valve Gp-Control -Centershift
| 10***13 | Edge Group-Cutting | 1 |
| 14***40 | Moldboard As | 1 |
| 14***43 | Cylinder & Mtg Group-Sideshift | 1 |
276-3655 Valve Gp-Control -Blade Lift
| 19***07 | Seal-O-Ring | 1 |
| 19***08 | Seal-O-Ring | 2 |
| 19***10 | Seal-O-Ring | 3 |
276-3653 Valve Gp-Control -Circle Drive
| 22***22 | Coil As-Solenoid; (24-Volt) | 1 |
| 27***53 | Valve Group-Control; -Circle Drive | 1 |
| 4K***39 | Seal-O-Ring | 1 |
276-3657 Valve Gp-Control -Articulation
| 08***79 | Bearing; (Sleeve) | 2 |
| 13***35 | Spacer; (117x162x4.6-mm Thk)(117x162x4.6mm) | 2 |
| 13***36 | Shim Pack; (Includes 26-Shims)(Each Incls 26 Shims) | 2 |
276-3652 Valve Gp-Control -Ripper
| 19***47 | Washer; (19.15x31.65x2.36-mm Thk) | 1 |
| 19***14 | Nut; (3/4-32-2b-Thd) | 1 |
| 27***52 | Valve Group-Control; -Ripper | 1 |
276-3656 Valve Gp-Control -Wheel Lean
| 10***45 | Valve Group-Diverter; (Secondary Steering) | 1 |
| 13***00 | Valve Group-Unloading | 1 |
| 16***49 | Seal-O-Ring; (12.42mm Id) | 1 |
290-6436 Valve Gp-Diverter -Brake Charging
| 13***04 | Plate-Wear | 1 |
| 14***38 | Rail-Top | 1 |
| 14***39 | Rail-Bottom | 1 |
252-8038 Valve Gp-Pressure Reducing
| 13***84 | Plate As | 1 |
| 25***38 | Valve Group-Pressure Reducing; -Implement Pilot Oil | 1 |
| 7X***75 | Bolt; (M24x3x60-mm) | 6 |
345-6946 Valve Gp-Pressure Reducing
| 11***92 | Rod | 1 |
| 13***38 | Washer-Plastic; (13x31.7x0.8-mm Thk) | 2 |
| 13***44 | Latch Assem.; (Lh) | 1 |
345-4472 Valve Gp-Pressure Reducing
| 26***31 | Door Group-Cab; -Rh | 1 |
| 26***32 | Door Group-Cab; -Lh | 1 |
| 30***26 | Step Group; -Lh | 1 |
104-3122 Valve Gp-Pump Control -Pressure, Flow Compensator
| 10***22 | Valve Group-Pump Control; -Pressure, Flow Compensator-Implement, Steering | 1 |
285-5240 Valve Gp-Pump Control -Pressure, Flow Compensator
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***93 | Bushing | 1 |
| 15***15 | Screw-Pan Head; (10-16x0.5-In) | 3 |
133-5330 Valve Gp-Relief
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***93 | Bushing | 1 |
| 13***30 | Valve Group-Relief | 1 |
257-8414 Valve Gp-Shuttle
| 12***63 | Plug As-Connector; (1-Pin) | 1 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 1 |
| 25***14 | Valve Group-Shuttle; -Brake Accumulator | 1 |
278-1799 Valve Gp-Solenoid
| 17***57 | Insert-Threaded; (M6x1-6h Thd) | 4 |
| 23***91 | Control Group-Air & Temperature | 1 |
| 26***96 | Blower & Mtg Group-Cab | 1 |
189-8627 Valve Gp-Solenoid
| 12***63 | Plug As-Connector; (1-Pin) | 1 |
| 12***64 | Receptacle As-Connector; (1-Pin) | 1 |
| 18***27 | Valve Group-Solenoid | 1 |
279-6521 Valve Gp-Solenoid & Manifold
| 12***66 | Spring | 1 |
| 23***78 | Bracket As; (Rh) | 1 |
| 25***68 | Pin-Spring | 1 |
308-0937 Valve Gp-Steering
| 12***66 | Spring | 1 |
| 23***77 | Bracket As; (Lh) | 1 |
| 25***68 | Pin-Spring | 1 |
117-5099 Valve Gp-Unloading
| 11***99 | Valve Group-Unloading | 1 |
| 26***03 | Blower Group-Cab; -Air Conditioner, Heater Fan | 1 |
| 26***04 | Gasket | 1 |
Implements
268-5760 Circle Gp
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***40 | Resistor | 1 |
| 12***78 | Locknut; (M6x1-Thd) | 1 |
265-6740 Drawbar Gp
| 14***07 | Fastener | 2 |
| 23***35 | Converter Group-Electrical | 1 |
| 25***57 | Electronics Group-Implement | 1 |
321-3121 Implement Ar
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 2 |
| 31***18 | Valve As-Pressure Relief; (Refrigerant Compressor) | 1 |
140-8440 Moldboard As
| 10***93 | Valve As | 1 |
| 10***94 | Gasket | 1 |
| 10***95 | Valve As | 1 |
135-8283 Plate Gp-Push
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***58 | Washer; (6.5x17x1-mm Thk) | 20 |
Lubrication System
4n-2481 Fastener Gp-Oil Pump Mounting -Engine
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 19***88 | Tube As-Oil Filler; (Engine) | 1 |
263-7310 Filler Gp-Engine Oil
| 10***28 | Cover | 1 |
| 10***29 | Name-Plate (Lubrication), Adapter | 1 |
| 14***35 | Connect Group; (Each Includes) | 1 |
272-5561 Filter Gp-Engine Oil -Engine
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 6 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
292-4057 Filter Gp-Engine Oil
| 16***22 | Clip-Loop | 1 |
| 20***28 | Hose As; (Fumes Disposal) | 1 |
| 29***57 | Filter Group-Engine Oil | 1 |
159-9362 Fumes Disposal Gp
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 11***68 | Seal-O-Ring; (15.54mm Id) | 1 |
| 15***62 | Fumes Disposal Group | 1 |
221-1764 Gauge Gp-Oil Level (Dipstick)
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 4 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 10 |
| 11***04 | Seal-O-Ring | 2 |
219-4443 Lines Gp-Engine Oil -Filter
| 10***39 | Plug-Drain; (Engine Oil Pan) | 1 |
| 10***40 | Adapter-Plug | 1 |
| 11***26 | Cap-Dust; (Engine Oil Change) | 1 |
253-3999 Lines Gp-Engine Oil Drain
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 2 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 2 |
| 12***02 | Seal-Integral | 1 |
262-9967 Lines Gp-Turbocharger Oil
| 12***56 | Cover As-Pump | 1 |
| 1M***44 | Bolt; (3/8-16x2-1/4 In) | 2 |
| 1W***38 | Shaft As-Pump Drive; (8-Teeth) | 1 |
161-4113 Pump Gp-Engine Oil
| 00***64 | End; (Hose) | 1 |
| 14***71 | Elbow, 45, -6 Orfs Fm Swivel | 1 |
| 16***13 | Pump Group-Engine Oil | 1 |
Machine Arrangement
259-9204 Common Ar
| 12***36 | Pump Group-Gear | 1 |
| 12***17 | Bolt-Socket Head; (M24x3x70-mm) | 28 |
| 13***73 | Link Group-Steering Frame Lock | 1 |
314-7907 Conversion Ar-Certification
| 20***39 | Film; (Exterior Sound) | 1 |
| 27***97 | Suppression Group-Sound; -Engine Enclosure | 1 |
| 30***83 | Guard Group-Bottom | 1 |
Operator Station
269-2208 Access Gp-Cab
| 24***20 | Panel As; (Air Conditioner, Heater Cont) | 1 |
| 25***96 | Switch As-Rocker; (Air Conditioner On, Off) | 1 |
| 26***08 | Access Group-Cab | 1 |
173-1028 Adjuster Gp-Seat
| 16***05 | Seal | 9 |
| 17***28 | Adjuster Group-Seat; -Seat | 1 |
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
237-3970 Air Compressor Gp-Seat
| 15***74 | Kit-Receptacle; (4-Pin) | 1 |
| 16***05 | Seal | 5 |
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
277-0711 Air Conditioner & Heater Gp
| 15***74 | Kit-Receptacle; (4-Pin) | 1 |
| 16***05 | Seal | 5 |
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
265-6597 Air Conditioner & Mounting Gp
| 06***45 | Clip | 2 |
| 12***93 | Bracket | 1 |
| 13***34 | Spacer; (11x20x25-mm Thk) | 2 |
265-6595 Air Conditioner Ar
| 11***58 | Washer; (6.5x17x1-mm Thk) | 6 |
| 11***29 | Washer; (6.6x22x2-mm Thk) | 3 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 18 |
292-0609 Armrest Gp -Rh
| 23***45 | Plate | 1 |
| 23***72 | Cushion As | 1 |
| 29***09 | Armrest Group; -Rh | 1 |
292-0617 Armrest Gp -Lh
| 25***64 | Wiring Group-Monitor; -Cd700 Display | 1 |
| 28***34 | Display Group-Monitor; -Cd700c | 1 |
| 28***24 | Display Group-Monitor; -Light Bar | 3 |
265-6596 Blower & Mtg Gp-Cab
| 25***67 | Wiring Group-Monitor; -Cd610 Display | 1 |
| 26***96 | Blower & Mtg Group-Cab | 1 |
| 29***09 | Display Group-Monitor; -Cd610 | 1 |
265-6603 Blower Gp-Cab -Air Conditioner, Heater Fan
| 09***68 | Bolt-Socket Head; (M5x0.8x8-mm) | 4 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***58 | Washer; (6.5x17x1-mm Thk) | 4 |
266-7000 Cab Ar
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 6 |
| 19***31 | Adapter; (Compact) | 1 |
| 24***16 | Display Group-Monitor; (Cd700) | 1 |
218-0324 Compressor Gp-Refrigerant
| 21***24 | Compressor Group-Refrigerant | 1 |
| 23***09 | Receptacle As-Connector; (4-Pin) | 1 |
| 8T***37 | Plug-Seal; (40 Pin Connector) | 1 |
277-9668 Condenser & Accumulator Gp -Refrigerant
| 27***68 | Condenser & Accumulator Group; -Refrigerant | 1 |
| 28***30 | Display Group-Monitor; (Cd610) | 1 |
| 29***11 | Case-Carrying | 1 |
309-5955 Control & Mtg Gp-Joystick -Operator Platform
| 10***53 | Bumper-Conical | 2 |
| 10***41 | Plate As | 1 |
| 10***50 | Latch As-Rh | 1 |
233-3291 Control Gp-Air & Temperature
| 10***53 | Bumper-Conical | 2 |
| 10***41 | Plate As | 1 |
| 10***50 | Latch As-Rh | 1 |
308-5203 Control Gp-Joystick -Rh
| 10***53 | Bumper-Conical | 2 |
| 10***41 | Plate As | 1 |
| 10***49 | Latch As; (Lh) | 1 |
308-5204 Control Gp-Joystick -Lh
| 10***53 | Bumper-Conical | 2 |
| 10***41 | Plate As | 1 |
| 10***49 | Latch As; (Lh) | 1 |
356-3609 Control Gp-Joystick -Rh
| 10***53 | Bumper-Conical | 2 |
| 10***41 | Plate As | 1 |
| 10***50 | Latch As-Rh | 1 |
356-3607 Control Gp-Joystick -Lh
| 10***53 | Bumper-Conical | 2 |
| 10***41 | Plate As | 1 |
| 10***49 | Latch As; (Lh) | 1 |
253-9005 Control Gp-Steering
| 11***58 | Washer; (6.5x17x1-mm Thk) | 7 |
| 11***29 | Washer; (6.6x22x2-mm Thk) | 18 |
| 11***19 | Screw-Flat Head; (No 6x1-In) | 14 |
266-7015 Cover Gp-Platform
| 17***35 | Motor Group-Electric; -Circulating Fan | 1 |
| 1B***13 | Bolt,Machine Governor And Decelerator Control | 1 |
| 1M***30 | Nut And Lock Assem.; (No. 10-32) | 2 |
252-1805 Cushion Gp-Arm
| 15***66 | Valve | 1 |
| 23***67 | Filter Element As-Air; (Primary) | 1 |
| 25***05 | Cushion Group-Arm | 1 |
292-7980 Display Ar-Monitor -Cd610
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 10 |
| 17***56 | Locknut | 4 |
| 19***65 | Kit-Receptacle; (4-Pin)(4 Pin) | 1 |
292-7975 Display Ar-Monitor -Cd700
| 23***13 | Support | 1 |
| 29***75 | Display Ar-Monitor; -Cd700 | 1 |
| 7X***29 | Washer; (11x25x3-mm Thk) | 2 |
266-7027 Display Gp-Camera -Work Area Visual System
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***00 | Clip; (Tab) | 4 |
| 14***04 | Horn As | 2 |
292-0309 Display Gp-Monitor -Cd610
| 29***09 | Display Group-Monitor; -Cd610 | 1 |
| 5P***25 | Grommet (9.50mm Id) | 1 |
| 7K***81 | Strap-Pressure & Return Hoses To | 4 |
286-0134 Display Gp-Monitor -Cd700c
| 17***75 | Horn As; (24-Volt, High Tone) | 2 |
| 28***34 | Display Group-Monitor; -Cd700c | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
286-9124 Display Gp-Monitor -Light Bar
| 28***55 | Antenna As | 1 |
| 28***24 | Display Group-Monitor; -Light Bar | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 3 |
266-7032 Door Gp-Cab -Lh
| 11***18 | Arm | 2 |
| 12***86 | Block | 4 |
| 12***87 | Bracket | 4 |
280-0528 Door Gp-Cab -Rh
| 19***25 | Washer-Hard; (8.8x25.5x2-M Thk) | 4 |
| 1D***83 | Bolt-Carriage; (3/8-16x1-In) | 2 |
| 27***60 | Washer-Hard; (15x22x2.5-mm Thk) | 2 |
266-7031 Door Gp-Cab -Rh
| 08***91 | Bolt; (M10x1.5x55-mm) | 1 |
| 10***97 | Valve As; (Low Side) | 1 |
| 10***99 | Valve As; (Air Conditioner Refrigerant) | 1 |
266-7033 Door Gp-Cab -Lh
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***18 | Arm | 2 |
| 12***86 | Block | 4 |
286-5675 Duct & Filter Gp-Cab Air
| 22***09 | Screw-Truss Head; (M4x0.7x14-mm) | 2 |
| 25***47 | Grommet | 1 |
| 28***87 | Plate | 1 |
266-7005 Duct Gp-Cab Air -Cab Air
| 1T***38 | Washer | 5 |
| 26***05 | Duct Group-Cab Air; -Cab Air | 1 |
| 28***92 | Screw-Truss Head; (M8x1.25x35-mm) | 4 |
170-4820 Fan Gp-Circulating
| 12***75 | Washer; (21x130x3-mm Thk) | 4 |
| 13***17 | Mount As | 12 |
| 13***27 | Sleeve | 6 |
266-7008 Fan Gp-Circulating
| 26***08 | Fan Group-Circulating | 1 |
| 27***33 | Plate As | 1 |
| 27***34 | Plate As | 1 |
308-0857 Filter Gp-Cab Air -High Efficiency
| 19***78 | Washer-Hard; (13.5x30x12-mm Thk) | 26 |
| 30***57 | Filter Group-Cab Air; -High Efficiency | 1 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 9 |
309-2877 Footrest Gp
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 2 |
| 19***78 | Washer-Hard; (13.5x30x12-mm Thk) | 26 |
| 30***77 | Main (Stud) Bearing, Main (Stud) Bearing; Upper, #1,2,3,5,6, Footrest Group | 1 |
265-6600 Heater Gp-Cab
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 2 |
| 19***78 | Washer-Hard; (13.5x30x12-mm Thk) | 26 |
| 26***00 | Heater Group-Cab | 1 |
319-1640 Horn Gp-Air
| 13***43 | Plate As-Lumbar | 1 |
| 17***52 | Retainer | 1 |
| 17***07 | Holder | 1 |
319-1639 Horn Gp-Electric
| 16***83 | Knob-Lumbar | 1 |
| 25***28 | Plug | 3 |
| 29***97 | Cushion As-Back | 1 |
266-7042 Installation Gp-Radio
| 22***40 | Knob | 1 |
| 25***85 | Plate | 1 |
| 26***42 | Installation Group-Radio | 1 |
266-7028 Installation Gp-Radio -Satellite Antenna
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 21***14 | Switch As-Limit; (Seat Adjustment) | 1 |
| 26***28 | Installation Group-Radio; -Satellite Antenna | 1 |
266-7007 Liner Gp-Cab
| 22***40 | Knob | 1 |
| 26***07 | Liner Group-Cab | 1 |
| 28***17 | Panel As-Fuse | 1 |
271-9306 Lines Gp-Air Conditioner
| 11***09 | Knob-Control | 2 |
| 11***58 | Washer; (6.5x17x1-mm Thk) | 11 |
| 25***99 | Lamp As-Led; (24-Volt, Green) | 1 |
268-0243 Lines Gp-Heater
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***39 | Nut-Weld; (M6x1-Thd)(M6x1-6h Thd) | 2 |
| 17***11 | Nut; (5/8-24-Thd) | 1 |
309-0917 Mirror Gp-Rear View -Interior
| 26***70 | Platform Group; -Lh | 1 |
| 26***33 | Door Group-Cab; -Lh | 1 |
| 26***60 | Lighting Group-Flood; -Engine Enclosure, Lh | 1 |
266-7009 Mirror Gp-Rear View -Exterior, Heated
| 09***24 | Plug-Button | 1 |
| 11***58 | Washer; (6.5x17x1-mm Thk) | 12 |
| 11***29 | Washer; (6.6x22x2-mm Thk) | 7 |
138-0727 Mirror Gp-Rear View
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***27 | Mirror Group-Rear View | 1 |
| 17***11 | Nut; (5/8-24-Thd) | 1 |
299-0881 Mounting Gp-Control -With Enclosure
| 26***70 | Platform Group; -Lh | 1 |
| 26***31 | Door Group-Cab; -Rh | 1 |
| 26***33 | Door Group-Cab; -Lh | 1 |
308-2084 Mounting Gp-Pedal
| 24***54 | Film-Warning; (No Step) | 1 |
| 27***71 | Handrail Group | 1 |
| 27***78 | Support Group-Platform | 1 |
279-5036 Mounting Gp-Platform -Lh
| 24***54 | Film-Warning; (No Step) | 1 |
| 27***52 | Step Group; -Lh | 1 |
| 27***52 | Handrail Group | 1 |
294-9295 Mounting Gp-Platform -Lh
| 13***90 | Bushing; (Radio Mount) | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 17***37 | Connector; (Radio) | 1 |
278-1613 Mounting Gp-Platform
| 27***04 | Grating | 1 |
| 27***06 | Grating | 1 |
| 27***40 | Grating | 1 |
8x-8994 Mounting Gp-Platform
| 26***12 | Platform As | 1 |
| 26***15 | Cover Group-Platform | 1 |
| 28***21 | Support As | 1 |
294-9296 Mounting Gp-Platform -Rh
| 19***54 | Sleeve | 1 |
| 29***96 | Mounting Group-Platform; -Rh | 1 |
292-6402 Pan Gp-Backrest -Lumbar
| 19***54 | Sleeve | 1 |
| 29***02 | Pan Group-Backrest; -Lumbar | 1 |
292-9237 Pan Gp-Backrest -Lumbar
| 13***90 | Bushing; (Radio Mount) | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 20***28 | Harness As-Radio; (Fm) | 1 |
243-6737 Pan Gp-Seat -Lumbar
| 13***90 | Bushing; (Radio Mount) | 1 |
| 14***81 | Knob-Select; (Radio) | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
282-9485 Panel Gp-Cab
| 13***90 | Bushing; (Radio Mount) | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 20***28 | Harness As-Radio; (Fm) | 1 |
314-3323 Panel Gp-Control -Accugrade, Lh
| 15***59 | Film-Instruction; (Do Not Drill, Weld Rops) | 2 |
| 26***11 | Rops As | 1 |
| 31***23 | Panel Group-Control; -Accugrade, Lh | 1 |
276-8498 Panel Gp-Control -Variable Blade Float
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 1 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 1 |
| 17***90 | Spring | 1 |
319-1617 Panel Gp-Control -Accugrade
| 13***03 | Screen Group-Sun | 1 |
| 28***26 | Plate As | 1 |
| 31***17 | Panel Group-Control; -Accugrade, Rh | 1 |
266-7004 Panel Gp-Instrument
| 23***83 | Seat Group-Suspension; -Air | 1 |
| 26***04 | Panel Group-Instrument | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
269-2209 Platform Ar
| 09***43 | Pin-Cotter | 2 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 8 |
| 17***30 | Screw-Button Head; (3/8-16x1-In) | 6 |
269-2207 Platform Ar -Dual
| 0T***44 | Bolt (1.25" Long) | 1 |
| 17***37 | Spacer; (11.7x19.8x20.3-mm Thk)(Lh Seat Side) | 1 |
| 20***88 | Bolt; (7/16-20) (44.5mml) | 1 |
260-3770 Platform Gp -Lh
| 17***87 | Setscrew; (1/4-20-Thd) | 4 |
| 17***35 | Block Kit; (Includes Bolt, Washers, Blocks And Setscrews) | 1 |
| 20***03 | Washer-Hard; (10.2x22.22x2.38-mm Thk) | 2 |
271-6651 Platform Gp-Operator
| 11***58 | Washer; (6.5x17x1-mm Thk) | 19 |
| 13***39 | Nut; (U-Type Retainer) | 1 |
| 27***51 | Platform Group-Operator | 1 |
271-0751 Platform Gp-Operator
| 10***03 | Fastener | 26 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***11 | Screw-Machine; (3/8-16x0.75-In) | 1 |
266-7002 Platform Gp-Operator
| 11***58 | Washer; (6.5x17x1-mm Thk) | 2 |
| 13***00 | Clip; (Tab) | 4 |
| 16***14 | Knob | 1 |
233-3123 Radio Gp -Am/Fm/Wb
| 11***58 | Washer; (6.5x17x1-mm Thk) | 19 |
| 13***39 | Nut; (U-Type Retainer) | 1 |
| 23***23 | Radio Group; -Am/Fm/Wb | 1 |
284-8953 Radio Gp -Am/Fm/Wb/Cd Player
| 12***33 | Tank As-Window Washer | 2 |
| 13***40 | Locknut; (M8x1.25-Thd) | 6 |
| 14***95 | Hose; (650-cm Each) | 0 |
284-8955 Radio Gp -Am/Fm/Wb/Sirius/ Cd Player
| 11***93 | Glass; (5-mm Thk) | 1 |
| 11***94 | Glass; (Top/Side) | 2 |
| 11***95 | Glass; (Bottom/Side) | 2 |
294-0990 Radio Gp -Am/Fm/Wb/Xm/Cd Player
| 14***40 | Moldboard As | 1 |
| 17***95 | Adapter-Bit | 8 |
| 1J***27 | Bolt-Plow; 11.4cm(4.45in)Long | 10 |
294-0991 Radio Gp -Am/Fm/Wb/Sirius/Cd Player
| 10***17 | Edge-Cutting | 6 |
| 10***18 | Bit | 2 |
| 1J***27 | Bolt-Plow; 11.4cm(4.45in)Long | 22 |
294-0989 Radio Gp -Am/Fm/Wb/Cd Player
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***35 | Motor Group-Window Wiper | 1 |
| 12***07 | Motor As | 1 |
331-5292 Radio Gp -Am, Fm
| 10***16 | Edge-Cutting | 6 |
| 10***18 | Bit | 2 |
| 1J***27 | Bolt-Plow; 11.4cm(4.45in)Long | 22 |
210-2270 Recliner Gp-Seat
| 10***18 | Bit | 2 |
| 13***90 | Edge-Cutting | 6 |
| 1J***27 | Bolt-Plow; 11.4cm(4.45in)Long | 22 |
266-7001 Rops Gp
| 10***18 | Bit | 2 |
| 13***40 | Edge-Cutting | 6 |
| 1J***27 | Bolt-Plow; 11.4cm(4.45in)Long | 22 |
266-7025 Screen Gp-Sun
| 26***25 | Screen Group-Sun | 1 |
233-3150 Seat & Mounting Gp
| 20***70 | Edge-Cutting | 3 |
| 23***50 | Seat & Mounting Group | 1 |
244-5002 Seat Gp -Cloth
| 24***02 | Seat Group; -Cloth | 1 |
244-5001 Seat Gp -Cloth
| 24***01 | Seat Group; -Cloth | 1 |
238-6683 Seat Gp-Suspension
| 23***83 | Seat Group-Suspension; -Air | 1 |
342-8961 Support Gp-Control -Operator Platform
| 34***61 | Support Group-Control; -Operator Platform | 1 |
233-3225 Support Gp-Control -Joystick, Rh
| 17***06 | Edge-Cutting | 3 |
| 23***25 | Support Group-Control; -Joystick, Rh | 1 |
233-3224 Support Gp-Control -Joystick, Lh
| 23***24 | Support Group-Control; -Joystick, Lh | 1 |
256-8768 Suspension Gp-Seat -Air, Heated
| 17***06 | Edge-Cutting | 1 |
| 25***68 | Suspension Group-Seat; -Air, Heated | 1 |
266-7013 Trim Gp-Cab
| 20***70 | Edge-Cutting | 1 |
| 26***13 | Trim Group-Cab | 1 |
284-6992 Washer Gp-Window
| 14***41 | Strip-Wear | 2 |
| 14***42 | Strip-Wear | 2 |
| 14***52 | Plate | 4 |
8x-8967 Window Gp-Cab
| 12***80 | Link As | 2 |
| 13***30 | Cam As | 2 |
| 13***32 | Plate | 2 |
8x-8971 Wiper & Washer Gp-Window
| 11***54 | Cylinder Group-Ripper | 2 |
| 12***37 | Lines Group-Ripper | 1 |
| 12***39 | Ripper Group | 1 |
Power Train
271-9315 Axle Gp-Rear
| 09***81 | Spacer; (10.5x20x10.0mm Thk) | 5 |
| 13***98 | Clip | 2 |
| 17***66 | Filler As; (Power Train Oil) | 1 |
333-9308 Base Gp-Oil Filter -Power Train
| 13***29 | Seal-O-Ring | 1 |
| 1R***09 | Filter Element-Oil; (Ultra High Efficiency)(Power Train) | 1 |
| 23***29 | Base Group-Oil Filter; -Transmission | 1 |
238-1029 Base Gp-Oil Filter
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
273-8989 Carrier Gp-Differential
| 13***29 | Seal-O-Ring | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 3 |
| 25***27 | Elbow | 1 |
273-9194 Case & Parts Gp-Planetary
| 03***39 | Bolt-12 Point Head | 4 |
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 12 |
| 11***85 | Seal-O-Ring; (13.94mm Id) | 1 |
266-9719 Chain Gp-Drive -Tandem
| 03***57 | Bolt; --To Reverse Shaft Bearing Retainer & Forward Shaft Bearing Retainer | 10 |
| 0S***69 | Bolt 95.25 mm(3.75 In.) Long | 18 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 8 |
268-0240 Control Gp-Differential Lock
| 26***40 | Control Group-Differential Lock | 1 |
| 3D***09 | Dowel (.625" Long) | 4 |
| 6V***69 | Bolt; (M20x2.5x80-mm) | 16 |
273-9199 Control Gp-Transmission Hyd
| 11***00 | Housing-Axle | 1 |
| 13***81 | Hub | 2 |
| 27***99 | Control Group-Transmission Hydraulic | 1 |
278-9805 Cover Gp-Shipping
| 13***06 | Housing Group-Rear Axle | 1 |
| 24***33 | Drain Assembly | 1 |
| 25***38 | Plug | 1 |
273-9007 Differential & Bevel Gear Gp
| 10***84 | Manifold | 1 |
| 14***28 | Connector Assem. | 1 |
| 14***33 | Connector As | 1 |
273-8991 Differential Gp
| 10***84 | Manifold | 1 |
| 14***28 | Connector Assem. | 1 |
| 14***33 | Connector As | 1 |
165-9955 Drive Gp-Final
| 14***90 | Hose As | 1 |
| 14***18 | Connector As | 2 |
| 16***55 | Drive Group-Final | 1 |
120-6162 Fastener Gp-Tandem
| 09***90 | Bolt-Socket Head; (M14x2x60-mm) | 4 |
| 10***62 | Dowel | 2 |
| 12***62 | Fastener Group-Tandem | 1 |
226-1260 Filler Gp-Power Train Oil
| 14***31 | Bolt; (M30x3.5x180-mm) | 12 |
| 22***60 | Filler Group-Power Train Oil | 1 |
| 27***42 | Bolt; (M30x3.5x80-mm) | 6 |
249-1750 Filter Gp-Oil
| 11***48 | Ring-Retaining | 1 |
| 12***36 | Cone-Bearing | 1 |
| 14***70 | Washer; (110.4x155.2x7-mm) | 1 |
287-1512 Filter Gp-Oil
| 0S***99 | Bolt 69mm(2.75in.)Long | 1 |
| 0T***65 | Bolt--3/8" X 3 1/2"--Use As Required; Bolt 5t***56 Plate To Cover Gp 4n***72 | 20 |
| 10***36 | Ring-Lock | 2 |
333-6433 Filter Gp-Oil
| 14***18 | Universal Joint Group | 1 |
| 29***34 | Bolt | 8 |
| 33***33 | Filter Group-Oil; -Transmission | 1 |
273-9195 Gear Gp-Input Transfer
| 26***99 | Universal Joint Group | 1 |
| 27***95 | Gear Group-Input Transfer | 1 |
| 29***98 | Bolt | 8 |
273-9197 Gear Gp-Output Transfer
| 26***23 | Tandem & Cover Group; -Rh | 1 |
| 26***24 | Tandem & Cover Group; -Lh | 1 |
| 27***97 | Gear Group-Output Transfer | 1 |
273-9001 Housing As-Differential
| 12***56 | Cover | 2 |
| 12***57 | Cover | 3 |
| 12***58 | Gasket | 4 |
271-9318 Housing Gp-Rear Axle
| 13***78 | Tire; (29.5-R29) | 6 |
| 27***18 | Housing Group-Rear Axle | 1 |
135-8106 Housing Gp-Rear Axle
| 12***56 | Cover | 2 |
| 12***57 | Cover | 3 |
| 12***58 | Gasket | 4 |
268-0245 Lines Gp-Power Train Oil
| 15***89 | Tire; (29.5-R29) | 6 |
| 26***45 | Lines Group-Power Train Oil | 1 |
268-0246 Lines Gp-Torque Conv Cooler
| 26***46 | Lines Group-Torque Conv Cooler | 1 |
213-5268 Motor Gp-Piston
| 21***68 | Motor Group-Piston; -Hydraulic Fan | 1 |
| 26***62 | Tire; (29.5-29) | 6 |
120-4408 Mounting Gp-Rear Axle
| 12***08 | Mounting Group-Rear Axle | 1 |
| 28***88 | Tire; (29.5-R29) | 6 |
275-9422 Pinion Gp-Differential
| 27***22 | Pinion Group-Differential | 1 |
| 31***96 | Tire | 6 |
273-9200 Planetary Gp-Transmission
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 13 |
| 14***11 | Seal-O-Ring | 1 |
| 14***12 | Seal-O-Ring | 1 |
8x-9045 Shaft Gp-Drive
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 6 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 44 |
| 13***02 | Seal-Lip-Type | 1 |
265-4498 Shaft Gp-Drive
| 26***98 | Shaft Group-Drive | 1 |
| 27***94 | Case & Parts Group-Planetary | 1 |
| 27***95 | Gear Group-Input Transfer | 1 |
266-9722 Tandem & Cover Gp
| 10***33 | Spider & Bearing Group | 2 |
| 14***19 | Shaft | 1 |
| 26***22 | Tandem & Cover Group | 1 |
266-9724 Tandem & Cover Gp -Lh
| 24***81 | Flange | 2 |
| 24***12 | Kit-Seal; (Solenoid Valve) | 1 |
| 25***37 | Valve Group-Solenoid | 1 |
266-9723 Tandem & Cover Gp -Rh
| 17***89 | Spider & Bearing As | 2 |
| 26***23 | Tandem & Cover Group; -Rh | 1 |
| 27***66 | Shaft As | 1 |
157-6997 Tire Gp
| 15***97 | Tire Group | 1 |
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
318-6157 Tire Gp
| 12***59 | Rim As | 1 |
| 2D***44 | Seal-O-Ring | 1 |
| 2D***08 | Grommmet | 1 |
261-3020 Tire Gp
| 22***33 | Tire; (17.5-R25) | 1 |
| 25***11 | Wheel Group | 1 |
| 26***20 | Tire Group | 1 |
134-3677 Tire Gp
| 13***67 | Spool As-Relief | 1 |
| 13***77 | Tire Group | 1 |
| 14***28 | Valve-Relief; (Torque Converter Inlet) | 1 |
290-1365 Tire Gp
| 12***18 | Wheel Group | 6 |
| 29***65 | Tire Group | 1 |
| 6V***37 | Plain Washer - Hardened | 120 |
137-1765 Tire Gp
| 13***65 | Tire Group | 1 |
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
186-4825 Tire Gp
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 14***46 | Plug-Pipe | 1 |
| 18***25 | Tire Group | 1 |
268-5680 Torque Converter Gp
| 26***08 | Axle Group-Front | 1 |
| 26***01 | Cylinder & Mtg Group-Steering | 1 |
| 26***80 | Torque Converter Group | 1 |
268-5675 Torque Converter Gp
| 25***00 | Rim As | 1 |
| 26***75 | Torque Converter Group | 1 |
| 2D***07 | Stud | 1 |
267-5245 Transmission Ar
| 11***49 | Shim; (0.127-mm Thk) | 6 |
| 11***56 | Seal | 4 |
| 11***71 | Pin | 2 |
143-2518 Universal Joint Gp
| 14***18 | Universal Joint Group | 1 |
| 27***43 | Plate As | 1 |
| 27***12 | Plate As | 1 |
265-4499 Universal Joint Gp
| 26***99 | Universal Joint Group | 1 |
| 27***43 | Plate As | 1 |
| 27***22 | Plate | 2 |
277-8874 Valve & Mtg Gp-Solenoid -Differential Lock Solenoid Valve
| 19***18 | Turnbuckle | 6 |
| 27***74 | Valve & Mtg Group-Solenoid; -Differential Lock Solenoid Valve | 1 |
| 34***52 | Cover As | 1 |
294-7362 Valve Gp-Manifold -Transmission
| 19***78 | Washer-Hard; (13.5x30x12-mm Thk) | 12 |
| 19***80 | Washer-Hard; (17.5x32x8-mm Thk) | 24 |
| 27***50 | Enclosure Group-Engine | 1 |
244-3114 Valve Gp-Modulating
| 19***78 | Washer-Hard; (13.5x30x12-mm Thk) | 26 |
| 24***14 | Valve Group-Modulating; -Transmission Hydraulic Control | 1 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 9 |
216-5342 Valve Gp-Modulating
| 1V***84 | Hinge | 1 |
| 20***09 | Door Group-Access; (Breakers, 24-Volt Outlet) | 1 |
| 20***66 | Latch As | 1 |
8p-1471 Valve Gp-Relief
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 2 |
| 5S***85 | Lockwasher | 2 |
| 6V***88 | Nut-Full (1/2-13 Thd); (1/2-13-Thd)(Full) | 2 |
341-7436 Wheel & Tire Gp
| 14***49 | Tube As | 2 |
| 14***50 | Arm As; (Lh) | 2 |
| 14***51 | Arm As; (Rh) | 2 |
271-9317 Wheel Ar
| 12***71 | Retainer | 3 |
| 22***18 | Frame As | 1 |
| 25***70 | Yoke | 3 |
252-0111 Wheel Gp
| 09***41 | Grommet | 1 |
| 19***78 | Washer-Hard; (13.5x30x12-mm Thk) | 6 |
| 25***11 | Wheel Group | 1 |
129-8518 Wheel Gp
| 12***18 | Wheel Group | 1 |
| 22***82 | Frame As | 1 |
| 9W***60 | Bearing-Sleeve | 4 |
Service Equipment And Supplies
278-1485 Film Gp
| 27***85 | Film Group | 1 |
| 29***00 | Film Group-International | 1 |
| 29***40 | Plate & Film Group | 1 |
289-3344 Film Gp -English
| 28***44 | Film Group; -English | 1 |
| 29***00 | Film Group-International | 1 |
| 29***40 | Plate & Film Group | 1 |
294-1000 Film Gp-International
| 29***00 | Film Group-International | 2 |
| 29***40 | Plate & Film Group | 1 |
| 30***61 | Electronics Group-Monitor; -Arabic, Chinese, English, Portuguese, Russian | 1 |
309-8777 Plate & Film Gp -English, With Monitor Software
| 29***00 | Film Group-International | 1 |
| 29***40 | Plate & Film Group | 1 |
| 30***59 | Electronics Group-Monitor; -Danish, English, Finnish, Norwegian, Portuguese, Swedish | 1 |
309-8792 Plate & Film Gp -Arabic, With Monitor Software
| 30***92 | Plate & Film Group; -Arabic, With Monitor Software | 1 |
309-8795 Plate & Film Gp -Slovenian, With Monitor Sfwr
| 30***95 | Plate & Film Group; -Slovenian, With Monitor Sfwr | 1 |
309-8790 Plate & Film Gp -Turkish, With Monitor Software
| 30***90 | Plate & Film Group; -Turkish, With Monitor Software | 1 |
309-8784 Plate & Film Gp -Swedish, With Monitor Software
| 30***84 | Plate & Film Group; -Swedish, With Monitor Software | 1 |
309-8789 Plate & Film Gp -Hebrew, With Monitor Software
| 30***89 | Plate & Film Group; -Hebrew, With Monitor Software | 1 |
309-8780 Plate & Film Gp -French, With Monitor Software
| 30***80 | Plate & Film Group; -French, With Monitor Software | 1 |
309-8778 Plate & Film Gp -Portugese, With Monitor Sfwr
| 30***78 | Plate & Film Group; -Portugese, With Monitor Sfwr | 1 |
298-5640 Plate & Film Gp
| 29***00 | Film Group-International | 1 |
| 29***40 | Plate & Film Group | 2 |
| 30***62 | Electronics Group-Monitor; -English, Portuguese, Romanian, Slovenian | 1 |
269-2203 Plate & Film Gp
| 26***03 | Plate & Film Group | 1 |
| 29***00 | Film Group-International | 1 |
| 29***40 | Plate & Film Group | 1 |
309-8787 Plate & Film Gp -Italian, With Monitor Software
| 30***87 | Plate & Film Group; -Italian, With Monitor Software | 1 |
309-8781 Plate & Film Gp -German, With Monitor Software
| 30***81 | Plate & Film Group; -German, With Monitor Software | 1 |
309-8782 Plate & Film Gp -Dutch, With Monitor Software
| 30***82 | Plate & Film Group; -Dutch, With Monitor Software | 1 |
309-8791 Plate & Film Gp -Russian, With Monitor Software
| 30***91 | Plate & Film Group; -Russian, With Monitor Software | 1 |
309-8793 Plate & Film Gp -Chinese, With Monitor Software
| 30***93 | Plate & Film Group; -Chinese, With Monitor Software | 1 |
309-8783 Plate & Film Gp -Danish, With Monitor Software
| 30***83 | Plate & Film Group; -Danish, With Monitor Software | 1 |
309-8786 Plate & Film Gp -Norwegian, With Monitor Sfwr
| 30***86 | Plate & Film Group; -Norwegian, With Monitor Sfwr | 1 |
309-8788 Plate & Film Gp -Greek, With Monitor Software
| 30***88 | Plate & Film Group; -Greek, With Monitor Software | 1 |
309-8794 Plate & Film Gp -Romanian, With Monitor Sfwr
| 30***94 | Plate & Film Group; -Romanian, With Monitor Sfwr | 1 |
302-5137 Plate & Film Gp
| 29***00 | Film Group-International | 1 |
| 29***40 | Plate & Film Group | 1 |
| 30***62 | Electronics Group-Monitor; -English, Portuguese, Romanian, Slovenian | 1 |
309-8779 Plate & Film Gp -Spanish, With Monitor Software
| 30***79 | Plate & Film Group; -Spanish, With Monitor Software | 1 |
309-8796 Plate & Film Gp -Finnish, With Monitor Software
| 30***96 | Plate & Film Group; -Finnish, With Monitor Software | 1 |
Work Tools
178-4096 Adapter Gp -(24h)
| 12***55 | Frame & Bearing As | 1 |
| 12***20 | Carriage As | 1 |
| 12***20 | Link As | 2 |
109-3113 Edge Gp-Cutting
| 10***13 | Edge Group-Cutting | 1 |
| 11***58 | Pin; (G.E.T.) | 1 |
| 11***59 | Retainer Assembly; (G.E.T.) | 1 |
138-6442 Edge Gp-Cutting
| 10***12 | Film-Instruction; (Alternate Exit, Remove Window) | 1 |
| 13***42 | Edge Group-Cutting | 1 |
| 21***02 | Film-Warning; (No Weld, No Drill, Read Omm) | 1 |
109-3114 Edge Gp-Cutting
| 10***14 | Edge Group-Cutting | 1 |
| 25***61 | Film-Information; (Cat Power, Acert Technology) | 2 |
| 28***06 | Film-Stripe; (Caterpillar, Grill, Rear) | 1 |
222-7544 Edge Gp-Cutting
| 10***61 | Film-Instruction; (Engine Shutdown) | 1 |
| 11***66 | Plate-Instruction; (Read Service Manual) | 1 |
| 11***78 | Film-Stripe; (Red)(1500 cm)(Red) | 0 |
135-9691 Edge Gp-Cutting
| 13***91 | Edge Group-Cutting | 1 |
| 21***02 | Film-Warning; (No Weld, No Drill, Read Omm) | 1 |
| 22***05 | Film; (Warning) (Universal) (On Lh Post Inside Cab) | 1 |
195-7271 Edge Gp-Cutting
| 19***71 | Edge Group-Cutting | 1 |
| 21***02 | Film-Warning; (No Weld, No Drill, Read Omm) | 1 |
| 22***54 | Film-Warning; (Universal, Read Omm, Intl) | 1 |
132-1019 Edge-Cutting
| 10***61 | Film-Instruction; (Engine Shutdown) | 1 |
| 11***66 | Plate-Instruction; (Read Service Manual) | 1 |
| 11***78 | Film-Stripe; (Red)(1500 cm)(Red) | 0 |
178-4107 Edge-Cutting
| 17***07 | Edge-Cutting | 1 |
| 25***54 | Electronics Group-Monitor; -Dutch, English, French, German, Portuguese, Spanish | 1 |
| 29***00 | Film Group-International | 1 |
208-8870 Edge-Cutting
| 20***70 | Edge-Cutting | 1 |
| 25***54 | Electronics Group-Monitor; -Dutch, English, French, German, Portuguese, Spanish | 1 |
| 29***00 | Film Group-International | 1 |
135-9576 Edge-Cutting
| 13***76 | Edge-Cutting | 1 |
| 25***54 | Electronics Group-Monitor; -Dutch, English, French, German, Portuguese, Spanish | 1 |
| 29***00 | Film Group-International | 1 |
349-8438 Edge-Cutting
| 25***54 | Electronics Group-Monitor; -Dutch, English, French, German, Portuguese, Spanish | 1 |
| 29***00 | Film Group-International | 1 |
| 29***40 | Plate & Film Group | 1 |
135-9349 Edge-Cutting
| 13***49 | Edge-Cutting | 1 |
| 25***54 | Electronics Group-Monitor; -Dutch, English, French, German, Portuguese, Spanish | 1 |
| 26***03 | Plate & Film Group | 1 |
353-5494 Edge-Cutting
| 29***00 | Film Group-International | 1 |
| 29***40 | Plate & Film Group | 1 |
| 30***59 | Electronics Group-Monitor; -Danish, English, Finnish, Norwegian, Portuguese, Swedish | 1 |
132-4753 Edge-Cutting
| 13***53 | Edge-Cutting | 1 |
| 25***54 | Electronics Group-Monitor; -Dutch, English, French, German, Portuguese, Spanish | 1 |
| 26***84 | Film Group-International | 1 |
349-8440 Edge-Cutting
| 25***54 | Electronics Group-Monitor; -Dutch, English, French, German, Portuguese, Spanish | 1 |
| 29***00 | Film Group-International | 1 |
| 29***40 | Plate & Film Group | 1 |
140-8451 Mounting Gp-Blade
| 14***51 | Mounting Group-Blade | 1 |
| 29***00 | Film Group-International | 1 |
| 29***40 | Plate & Film Group | 1 |
278-3510 Mounting Gp-Ripper
| 27***10 | Mounting Group-Ripper | 1 |
| 29***00 | Film Group-International | 1 |
| 29***40 | Plate & Film Group | 1 |
278-3509 Ripper Ar
| 27***09 | Ripper Ar | 1 |
| 29***00 | Film Group-International | 1 |
| 29***40 | Plate & Film Group | 1 |
125-5739 Ripper Gp
| 12***39 | Ripper Group | 1 |
| 29***00 | Film Group-International | 1 |
| 29***40 | Plate & Film Group | 1 |
136-8310 Tooth Gp-Ripper
| 13***10 | Tooth Group-Ripper | 1 |
| 29***00 | Film Group-International | 1 |
| 29***40 | Plate & Film Group | 1 |
24M serial number reference
The PIN plate is a riveted metal tag on the mainframe, typically on a front frame rail near the cab or forward of the moldboard lift-cylinder support (exact spot varies by unit; check the operator's manual if not visible). The first three characters of the 17-character PIN are the prefix identifying the model/serial-number family (e.g. B9K, B93); the digits that follow are the sequential unit number within that prefix.
| Prefix | Identifies | Notes |
|---|---|---|
| B9K | 24M motor grader (mining-class), C18 ACERT power train | Serial range B9K00001 and up. Covered by its own factory service and parts documentation, separate from the B93 range. Seen on sale listings from around 2012 through current new-production units, so this range spans most of the 24M's build life. No sourced explanation for the running change or configuration split versus B93 - confirm with dealer. |
| B93 | 24M motor grader (mining-class), C18 ACERT power train | Serial range B9300001 and up. Factory service/parts documentation for this range is dated 2013, with sale listings showing units into 2014, suggesting this prefix covers earlier production than B9K. No sourced explanation for the running change or configuration split versus B9K - confirm with dealer. |
Frequently asked questions
What engine powers the Caterpillar 24M motor grader?
The 24M runs a Cat C18 ACERT diesel rated at 397 kW (533 hp) net, a six-cylinder, 18.1 L engine with a bore and stroke of 145 mm x 183 mm and maximum torque around 2713 N·m (2,001 lb-ft). Caterpillar offered a Tier 3/Stage IIIA-compliant version for regulated markets and a non-current Tier 2 version for other regions; both use the same C18 ACERT block.
How much does a Caterpillar 24M motor grader weigh?
Operating weight varies by configuration: about 62,700 kg (138,300 lb) in base trim, roughly 65,800 kg (145,150 lb) typically equipped with a ripper and standard tires, and up to about 69,300 kg (152,900 lb) at maximum equipped weight with heavier options. The front axle carries a smaller share of the total than the rear tandem axle.
What replaced the Caterpillar 24M motor grader?
Caterpillar replaced the 24M in 2018 with the non-suffixed Cat 24, a heavier mining grader (about 11% more weight) built around the larger C27 ACERT engine and a modular driveline for faster component changes. The 24M itself had succeeded the 24H, so it sits as the middle generation in that mining-grader line.
What 24M owners discuss
What engine does the 24M actually use, and how does that differ from the newer 24 model?
The 24M runs a Cat C18 ACERT, a 6-cylinder 18.1 L diesel rated around 397 kW (533 hp). Cat built it in more than one emissions configuration depending on destination market: Tier 2 certified for non-regulated markets and US EPA Tier 4 Interim for regulated markets, so confirm the actual certification and aftertreatment hardware off the dataplate rather than assuming. Do not confuse the 24M with the later "24" model (its successor, introduced around 2018): that machine switched to a V12 Cat C27 (27 L) meeting Tier 4 Final/Stage IV without a DEF tank, using a NOx reduction system and diesel oxidation catalyst instead, and puts down meaningfully more torque than the 24M. If a used listing simply says "24" grader, verify which engine and emissions family it has before assuming parts or service procedures carry over.
What is different about the 24M's transmission, and what powertrain failure pattern do techs report?
The 24-series is the only Cat motor grader line built with a torque converter; the smaller M-series graders run straight electronic powershift. The 24M's converter is a lockup type: it multiplies torque off the line in 1st gear, then the lockup clutch engages past a set ground speed for direct drive, backed by electronic clutch pressure control across the 6-forward/3-reverse gearset. Field reports describe converter wear caught by stall test before full failure: one shop found transmission solenoid output reading around 90% on Cat ET versus 100% on a healthy machine, with no acceleration under load, traced to a worn stator sprag clutch inside the converter. A separate documented case showed converter outlet oil temperature climbing from roughly 70C to over 130C during a stall test with metal fragments turning up in the transmission filter and screens, despite pressures reading in spec; the transmission failed shortly after. Have your dealer verify a proper stall test and filter/screen inspection before trusting a used converter that "seems fine."
What hydraulic and steering symptoms show up as these graders rack up hours?
Same wear pattern reported across large articulated graders generally: worn cylinder seals let the moldboard drift under load and slow circle or lift response; worn steering cylinder seals or falling system pressure show up as steering lag or wander; and articulation-joint bushing and pin wear shows up as play in the center hinge. The 24M's hydraulic system runs a variable piston pump rated around 549 L/min (145 gpm) at up to 24,100 kPa (3500 psi) feeding a roughly 265 L (70 gal) reservoir, so a pump or relief-valve fault tends to show up fleet-wide as sluggish response rather than one isolated function. On inspection, watch for the engine deck sitting noticeably lower than the cab, a sign of a bent or repaired articulation frame, and for cracked welds near the center hinge from linkage strain.
What wear items typically show up on the circle, drawbar, and moldboard?
The original brass circle wear strips and shim setup need periodic circle-shoe adjustment, strip replacement, and daily manual greasing, a recurring maintenance load that mine operators flagged as a downtime driver. Caterpillar's answer was a High-Performance Circle retrofit: a sealed roller-bearing circle tied into the machine's auto-lube system that needs no adjustment for an extended service life and bolts on to existing 24M and 24 machines. On a used unit, check whether that retrofit was done; it is a decent proxy for how the prior owner managed circle wear. Cutting edges typically last on the order of 500 to 1,000 hours depending on material abrasiveness and haul-road conditions, so budget a range rather than trusting one number.
Are there common electrical, monitor, or sensor complaints on the 24M?
Nothing 24M-specific stands out as a widespread pattern; it shares its monitor and diagnostic architecture (Cat ET and the cab display) with the rest of the M-series grader line. General consensus from grader techs: when the gauge cluster or monitor goes fully dead, suspect the wiring harness and connectors (corrosion, chafing) or the fuse/relay feeding that circuit before condemning the monitor itself, since a harness or ground fault takes multiple gauges down at once rather than one sensor failing in isolation. Quad-gauge and tach circuits are sensitive to supply voltage, so intermittent or erratic readings often trace back to a charging-system or connector voltage-drop issue rather than a failed sender. Treat any drivetrain warning light (transmission or converter temperature) as real given the converter wear pattern noted above, and have your dealer verify before clearing it.
What wear pattern shows up on the tires and tandem drive?
The 24M rides on large mining-spec tires, commonly cited in the 29.5-29 to 29.5R25 range with exact size and ply rating varying by configuration, and oscillating tandem rear wheels with brakes at each tandem for a large total braking surface. Uneven wear across the tandem tire set is flagged in buyer inspections as a sign of misalignment or frame trouble, not just a tire issue, so check it alongside the tandem drive housings themselves. Because these machines run continuous haul-road duty at mine sites, very high hour counts are normal; used listings in the 25,000 to 30,000-plus hour range are not unusual. Hour count alone is not a disqualifier here; condition and PM or rebuild history matter more.
What should you check specifically when buying a used 24M?
Bring a qualified heavy-equipment mechanic and pull the full service history first; on a machine this size, maintenance records matter more than the hour meter. In person: check the articulation joint for play and confirm the engine deck is not sitting low relative to the cab (a sign of a bent articulation frame); check the circle gear and moldboard for wear and ask whether the High-Performance Circle retrofit was done; run a stall test to check torque converter and transmission health, since the converter is the one component that sets the 24-series apart from the rest of the grader line and is costly to rebuild; check hydraulic response and look for leaks around the cylinders and pump; inspect the tandem drives and tire wear pattern for alignment issues; and check the radiator core and cooling package for dust plugging or corrosion, a known wear item on mine-duty 24Ms. Have your dealer verify the torque converter stall spec and pull any stored drivetrain fault history before you commit to purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 24M part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.