Caterpillarskid steer loader
Caterpillar 248
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 248 is a radial-lift, wheeled skid steer loader in Cat's original compact loader lineup, built around a Cat 3034T/3034C 4-cylinder turbocharged diesel of roughly 3.0 L displacement rated at about 80 hp gross and 74 hp net at 2600 rpm. Operating weight runs roughly 7,300 to 7,550 lb (3,300 to 3,420 kg) depending on configuration, with rated operating capacity near 2,000 lb (907 kg). Surviving units carry the 6LZ serial prefix and trace to a short production window around 2001-2002. The 248 sat at the top of Cat's first-generation radial-lift skid steer family alongside the 216, 226, 228, 236, and 246, and was later succeeded by the 248B, which moved to the Cat 3044C DIT engine under the SCL serial prefix. Buyers could spec the 248 with standard or high-flow auxiliary hydraulics, open ROPS or an enclosed heated/air-conditioned cab, and pilot (joystick) hydraulic controls in Cat's S-pattern layout, all riding on a chain-driven, hydrostatic 4-wheel-drive undercarriage.
Cat entered the skid steer category directly in the late 1990s with this radial-lift family, replacing its earlier reliance on outside-built loaders, and the 248 represented the largest-frame, highest-horsepower wheeled offering in that first generation before Cat moved the platform to the B-series with a different engine, revised electronics, and the SCL prefix in the mid-2000s. Because the 6LZ-prefix 248 had a short build run before the B-series took over, fewer units survive today than same-era Bobcat or Case competitors, and Cat dealer parts priority now favors 248B and later machines. The 248 predates digital CID/FMI diagnostics entirely, running an analog lamp instrument pod, which makes it straightforward for independent shops to service without factory diagnostic software. Its 3034 engine family is shared with the 226, 236, and 246, which keeps parts cross-compatibility strong and makes the 248 a practical rebuild or parts-source candidate in the used-equipment and salvage market.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 248 specifications
Engine
| Engine model | Cat 3034 diesel, turbocharged 4-cylinder (spec databases list it as either 3034C or 3034T; same base engine family) |
| Type | 4-cycle, 4-cylinder, direct injection, turbocharged, liquid-cooled diesel |
| Gross power | 80 hp (60 kW) at 2,600 rpm |
| Net power | 74 hp (55 kW) at 2,600 rpm |
| Net flywheel power | 55 hp (41 kW) |
| Displacement | 3.0 L (183 cu in) |
| Bore x stroke | 97 mm x 100 mm (3.9 in x 4.0 in) |
| Emissions tier | Tier 2 Interim on one spec sheet; not confirmed elsewhere |
Weights
| Operating weight | 3,330-3,416 kg (7,325-7,530 lb) - varies by configuration/source |
| Shipping weight | 3,080 kg (6,780 lb), single source |
Dimensions
| Length with bucket on ground | 3,485-3,515 mm (137.3-138.4 in / 11.4-11.5 ft) |
| Length without bucket | 2,765-2,800 mm (108.9-110.2 in) |
| Width over tires | 1,670-1,829 mm (65.8-72.1 in) - varies by configuration/source |
| Height to top of cab | 2,080-2,092 mm (81.9-82.4 in) |
| Max overall height, boom raised | 3,962-3,975 mm (156-156.6 in) |
| Wheelbase | 1,105-1,134 mm (43.5-44.6 in) |
| Ground clearance | 195-229 mm (7.7-9.0 in) - varies by configuration/source |
| Turning radius, center, including bucket | 2,197 mm (86.5 in) |
| Tire size | 12.00x16.5, all positions |
Performance
| Travel speed | 12.1 km/h (7.6 mph), single-speed hydrostatic drive |
| Lift/boom breakout force | 1,954-1,955 kg (4,300-4,308 lb) |
| Bucket/tilt breakout force | 2,385-2,386 kg (5,250-5,261 lb) |
| Rated operating capacity | 907 kg (2,000 lb); 953 kg (2,100 lb) with counterweight option |
| Tipping load | 1,815 kg (4,000 lb) |
| Hydraulic pump flow | standard 83 L/min (22 gpm); high-flow option 125 L/min (33 gpm) |
| Hydraulic system pressure | 230-290 bar (3,336-4,200 psi) - figures vary by source |
Service capacities (summary)
| Fuel tank | 90 L (23.7-23.8 gal) |
| Hydraulic system, total | 52-53 L (13.7-14.1 gal) |
| Hydraulic reservoir | 35 L (9.2 gal) |
| Engine oil, crankcase | 6.9-7.0 L (1.8 gal) |
| Cooling system | 9.9-10.0 L (2.6 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
248 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase, with filter | 6.9 L (1.8 US gal) | Cat DEO or Cat DEO-ULS diesel engine oil (API CI-4/CI-4 Plus or CJ-4 depending on fuel sulfur level). SAE 15W-40 covers roughly -10°C to 50°C (14°F to 122°F); SAE 10W-30 for a wider cold-to-moderate range; Cat DEO Cold Weather SAE 0W-40 for arctic starts down to -40°C (-40°F). |
| Cooling system | 9.9 L (2.6 US gal) | Cat ELC (Extended Life Coolant), premixed 50/50 concentrate and water, for extended-service protection. Conventional Cat DEAC coolant is the shorter-interval alternative. Do not mix coolant types in the system. |
| Fuel tank | 90.1 L (23.8 US gal) | No. 2-D ultra-low-sulfur diesel fuel. No. 1-D or a winter-blend diesel is recommended in sub-freezing climates to prevent fuel gelling and filter plugging. |
| Hydraulic tank | 34.9 L (9.2 US gal) | Cat HYDO Advanced hydraulic oil. Grade 10 (SAE 10W) is the typical factory-fill grade, suited to roughly -20°C to 40°C (-4°F to 104°F); Grade 30 (SAE 30) suits warmer climates up to 50°C (122°F). Cat TDTO is an accepted alternate in the same viscosity grades. |
| Hydraulic system, total (tank, lines, cylinders, drive motors) | 51.9 L (13.7 US gal) | Same Cat HYDO Advanced (or Cat TDTO) fluid as the hydraulic tank; this total includes the hydrostatic drive circuit feeding the wheel motors in addition to loader/attachment hydraulics. |
| Drive chain case, each side | 7.6 L (2.0 US gal) | Cat TDTO (Transmission and Drive Train Oil), SAE 30 grade, meeting Cat TO-4 performance requirements. SAE 10W is the cold-climate substitute below roughly -20°C (-4°F). |
| Grease, chassis pins and bushings (spec only, no fill capacity) | Not applicable — lubricate at scheduled service intervals | Cat multipurpose chassis grease, NLGI 2 (Cat Prime Application Grease or equivalent). Cat Extreme Application Grease – Arctic for sustained sub-zero climates; Desert grade for sustained high-heat, dusty conditions. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 248 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the 248 beyond the schedule
Predictive Maintenance & Fluid Analysis
Run S·O·S sampling on engine oil, hydraulic oil, and both chain case oils at every scheduled interval. The 3034T/3034C turbo engine shows bearing and turbocharger wear early through oil metals trending, well before a boost leak or knock appears. Hydraulic oil sampling flags hydrostatic pump and wheel motor wear, since the 248's chain-drive undercarriage runs shared hydrostatic circuits. Chain case oil sampling catches water intrusion and chain wear metal before chain stretch becomes visible.
Corrective & Common Repairs
Hard starting or stalling on the 3034 traces to air in the fuel system, a dirty fuel filter/water separator, or worn injection nozzles; bleed the fuel system after any filter change. Power loss and stalling under load point to a clogged air filter or fouled injectors. No-movement or jerky travel usually means low hydraulic oil, a clogged hydraulic filter, trapped air, or worn drive chains. Charging faults trace to loose battery terminals or belt tension.
Overhaul & Rebuild Points
At high accumulated hours, plan for hydrostatic pump and wheel motor rebuild or exchange, driven by S·O·S trends rather than a fixed hour number. Drive chains and sprockets wear as a set on both side chain cases and should be replaced together, not individually. The turbocharger on the 3034T is a common overhaul item once boost drops or oil consumption rises. Chain case covers and axle housings often need reseal work at rebuild time to stop chronic seepage.
Seasonal & Environment Servicing
Cold climates need correct-viscosity engine and hydraulic oil for reliable cold starts, plus verified coolant freeze protection before winter; a block heater helps starts on the 3034T. Hot, dusty jobsites demand more frequent air filter and radiator/oil cooler fin cleaning, since packed debris around the chain cases traps heat and grit against the chains. Wet or muddy conditions call for closer chain case oil checks for water intrusion and more frequent cab and engine air filter service.
248 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 163-4465 | Filter-Fuel | Fuel system service | Check fitment → |
| 110-6326 | Filter Element As-Air | Air intake service | Check fitment → |
| 110-6331 | Filter Element As-Air | Air intake service | Check fitment → |
| 134-8726 | Filter Element As-Air | Air intake service | Check fitment → |
| 140-2334 | Filter Element As-Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
248 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| Parking Brake lamp - flashing | Operator interlock control has flagged a fault in the park-brake/interlock circuit; brake will not release and drive/lift functions are locked out. | Faulty seat switch, lap/arm bar switch, park-brake solenoid, or float-detent coil wiring feeding the interlock control unit. | Confirm the operator is seated with the lap bar down and seat belt fastened, then inspect wiring and connectors at the seat and armrest switches before suspecting the interlock control unit itself. |
| Seat Belt / Armrest lamp - flashing (paired with Parking Brake lamp) | Interlock control has flagged a fault in the operator-presence circuit; machine stays locked out of drive and lift until the fault clears. | Worn or misaligned seat bar sensor, damaged lap bar switch contacts, or a chafed harness near the seat pod. | Inspect and clean the seat bar sensor and lap bar switch contacts, reseat harness connectors behind the seat, and re-test before replacing the sensor. |
| Interlock control shutdown - system overvoltage (above roughly 18V) | The operator interlock control unit disables itself as built-in overvoltage protection, dropping drive and lift interlocks. | Failed voltage regulator or an alternator overcharging the 12V system. | Measure charging voltage at the battery with the engine running; repair or replace the alternator/regulator before troubleshooting the interlock unit itself. |
| Hydraulic Oil Temperature lamp - on, with audible alarm | Hydraulic tank oil temperature has exceeded the safe operating range. | Low hydraulic oil level, a blocked or fouled oil cooler, or sustained heavy hydraulic load in hot ambient conditions. | Stop the machine and let it idle to cool, check oil level, and clear debris from the cooler fins before resuming work. |
| Hydraulic Oil Filter lamp - on | Hydraulic return filter is bypassing or restricted. | Dirty/clogged hydraulic filter element, or cold, thickened oil at startup. | Allow hydraulic oil to warm before judging the lamp; if it stays on once warm, replace the hydraulic filter element. |
| Engine Air Filter lamp - on | Intake air filter restriction has exceeded the allowable limit. | Clogged primary air filter element, or a cracked/loose intake hose causing a false restriction signal. | Inspect and clean or replace the air filter element, and check intake hoses and clamps for damage. |
| Engine Coolant Temperature lamp - on, with audible alarm | Engine coolant temperature has exceeded the safe operating limit. | Low coolant level, a clogged or fin-blocked radiator, or a slipping/broken fan drive belt. | Idle the machine down, shut off the engine once safe to do so, then check coolant level and radiator fins before restarting. |
| Engine Oil Pressure lamp - on | Engine oil pressure has dropped below the safe minimum. | Low engine oil level, a failing oil pressure sending unit, or worn oil pump/bearings. | Shut the engine down immediately, check oil level and condition, then verify pressure with a mechanical gauge before restarting. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
248 attachments & work tools
Buckets
General-purpose, multi-purpose (4-in-1), utility and light-material buckets are offered in widths matched to this mid-frame loader, roughly 1.68-2.0 m (66-80 in), in line with its rated capacity. Plain pin-on buckets need no auxiliary hydraulics; multi-purpose and grapple-style buckets use the standard auxiliary circuit to actuate the clamp jaw.
Pallet forks
Carriage-mounted forks sized for this operating-capacity class run around 1.2 m (48 in) wide (Class II fork rating). Forks mount on the standard quick-attach plate and require no auxiliary hydraulics to operate.
Augers
Direct-drive and single- or double-planetary auger drive heads are offered for this frame size, with planetary drives giving higher torque for larger-diameter bits. Auger drives run off the standard auxiliary circuit; the high-flow option speeds cycle time on larger bits.
Grapples
Root, brush and utility grapples (rake- or fork-style, often paired with a bucket) suit this capacity class for land-clearing and bulky material handling. They operate off the standard two-line auxiliary circuit for the grapple clamp cylinder.
Brooms
Angle, pickup and utility broom attachments are sized to this frame class for sweeping and light debris collection. Broom rotation draws off the standard auxiliary circuit; pickup/utility brooms with a hopper benefit from the high-flow option for faster fill and dump cycles.
Blades
Angle dozer blades and snow blades, including hydraulic-angle and multi-V snow configurations, are offered in this size class for grading and snow work. Blade angling functions typically run off the standard auxiliary circuit.
Trenchers
Chain trenchers with digging-depth ranges around 900 mm to 1.5 m (36-60 in) are offered for this frame size, in manual or hydraulic side-shift form. Trenchers are torque-demanding tools and generally call for the high-flow hydraulic option for usable chain speed.
Cold planers
Compact cold planers for small asphalt and concrete milling jobs are offered for skid steers in this class. These are high-demand tools and effectively require the high-flow (33 gpm class) hydraulic option to mill at a workable rate.
Backhoe attachment
A loader-mounted backhoe attachment is available for digging in tight-access sites, stabilized on outriggers and powered from the machine's standard auxiliary hydraulics.
Mulchers and brushcutters
Rotary brushcutter and forestry mulcher heads are offered for this frame class, though heavier mulcher heads are better matched to higher-flow machines. High-flow hydraulics are effectively required for acceptable cutting performance.
Coupler and mounting system
Work tools mount on Cat's own universal quick-attach wedge/pin coupler plate, operated by hand or hydraulically from the cab depending on machine configuration. A dedicated work-tool electrical connector lets the operator run powered attachments (augers, planers, brooms) without leaving the seat.
Hydraulic arrangement
Standard auxiliary flow runs about 83 L/min (22 gpm); an optional high-flow circuit raises this to about 125 L/min (33 gpm) at roughly 29 000 kPa (4200 psi) system pressure. The loader carries a standard auxiliary circuit, a separate high-flow circuit, a case-drain line and a work-tool electrical line, so high-flow-rated tools need the high-flow kit fitted to run properly.
Guarding options
Forestry-duty guard packages add cab window guards, a rear grille guard, a top guard with light covers, hydraulic hose/connection guarding and an engine intake screen for brush and forestry work. These bolt-on kits are dealer/aftermarket additions to the factory cab rather than a listed factory-order option on this platform.
Counterweight configuration
Some spec listings show a rear counterweight option raising rated operating capacity from about 907 kg (2000 lb) to about 953 kg (2100 lb), trading tipping-load margin for lift capacity. Availability varies by configuration/series and should be confirmed against the machine's serial range.
All 248 assemblies by section
Every catalogued assembly group for the Caterpillar 248. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
142-8703 Air Cleaner Gp
| 11***26 | Filter Element As-Air; (Primary) | 1 |
| 11***31 | Filter Element As-Air; (Secondary) | 1 |
| 11***17 | Valve-Dust; (Air Cleaner) | 1 |
142-8857 Air Cleaner Gp
| 11***17 | Valve-Dust; (Air Cleaner) | 1 |
| 13***26 | Filter Element As-Air; (Primary) | 1 |
| 14***31 | Air Cleaner Group | 1 |
183-7126 Air Cleaner Gp
| 14***03 | Air Cleaner Group | 1 |
| 18***26 | Air Cleaner Group | 1 |
| 5P***16 | Washer; (Hard) (8.8x20.5x2mm Thk) | 2 |
152-4893 Air Cleaner Gp
| 11***26 | Filter Element As-Air; (Primary) | 1 |
| 11***31 | Filter Element As-Air; (Secondary) | 1 |
| 11***17 | Valve-Dust; (Air Cleaner) | 1 |
183-7127 Lines Gp-Air
| 15***30 | Indicator-Air Filter Change | 1 |
| 15***74 | Hose | 1 |
| 16***13 | Adapter As | 1 |
152-4895 Lines Gp-Air
| 14***19 | Elbow As | 1 |
| 15***30 | Indicator-Air Filter Change | 1 |
| 15***95 | Lines Group-Air | 1 |
152-4894 Lines Gp-Air
| 14***04 | Hose | 1 |
| 15***30 | Indicator-Air Filter Change | 1 |
| 15***94 | Lines Group-Air | 1 |
165-4961 Manifold Gp-Exhaust
| 16***27 | Manifold-Exhaust | 1 |
| 16***28 | Bolt | 8 |
| 16***61 | Manifold Group-Exhaust | 1 |
164-7624 Manifold Gp-Inlet
| 15***05 | Gasket-Manifold | 1 |
| 16***24 | Manifold Group-Inlet | 1 |
| 16***25 | Manifold As-Inlet | 1 |
253-4413 Muffler & Converter
| 25***13 | Muffler & Converter | 1 |
253-4414 Muffler & Converter
| 25***14 | Muffler & Converter | 1 |
142-8815 Muffler Gp
| 14***15 | Muffler Group | 1 |
| 14***18 | Clamp-Pipe | 1 |
| 14***20 | Muffler As | 1 |
159-5787 Muffler Gp
| 14***49 | Gasket | 1 |
| 14***15 | Muffler Group | 1 |
| 15***87 | Muffler Group | 1 |
142-9003 Muffler Gp
| 14***49 | Gasket | 1 |
| 14***44 | Muffler Group | 1 |
| 14***03 | Muffler Group | 1 |
142-8844 Muffler Gp
| 14***16 | Elbow As-Exhaust | 1 |
| 14***18 | Clamp-Pipe | 1 |
| 14***44 | Muffler Group | 1 |
173-0424 Turbocharger Gp
| 06***58 | Clamp-Hose | 2 |
| 10***54 | Nut | 3 |
| 10***14 | Clip | 2 |
Basic Engine
172-6740 Camshaft Gp
| 10***41 | Bolt; (M6x1x10-mm) | 2 |
| 15***66 | Gear As-Idler; (59-Teeth) | 1 |
| 15***67 | Bushing | 2 |
177-2392 Camshaft Gp
| 10***41 | Bolt; (M6x1x10-mm) | 2 |
| 15***66 | Gear As-Idler; (59-Teeth) | 1 |
| 15***67 | Bushing | 2 |
188-8692 Camshaft Gp
| 10***41 | Bolt; (M6x1x10-mm) | 2 |
| 15***62 | Plug | 1 |
| 15***64 | Key-Woodruff | 1 |
171-2824 Camshaft Gp
| 10***41 | Bolt; (M6x1x10-mm) | 2 |
| 15***60 | Bushing | 1 |
| 15***62 | Plug | 1 |
164-7623 Cover Gp-Front Housing
| 10***71 | Bolt | 2 |
| 10***87 | Bolt; (M10x1.5x85-mm) | 2 |
| 15***55 | Cover | 1 |
153-0115 Cover Gp-Valve Mechanism
| 06***06 | Plug | 1 |
| 10***75 | Seal | 3 |
| 15***04 | Hose; (Fumes Disposal) | 1 |
195-9243 Cover Gp-Valve Mechanism
| 06***06 | Plug | 2 |
| 10***75 | Seal | 3 |
| 10***05 | Bolt; (M8x1.25x110-mm) | 1 |
176-2451 Crankshaft Gp
| 15***91 | Kit-Bearing | 1 |
| 15***99 | Washer-Thrust | 2 |
| 15***01 | Gear-Crankshaft; (30-Teeth) | 1 |
171-4663 Crankshaft Gp
| 15***91 | Kit-Bearing | 1 |
| 15***99 | Washer-Thrust | 2 |
| 15***01 | Gear-Crankshaft; (30-Teeth) | 1 |
188-5104 Crankshaft Gp
| 15***91 | Kit-Bearing | 1 |
| 15***99 | Washer-Thrust | 2 |
| 15***01 | Gear-Crankshaft; (30-Teeth) | 1 |
173-1252 Crankshaft Gp
| 15***91 | Kit-Bearing | 1 |
| 15***99 | Washer-Thrust | 2 |
| 15***01 | Gear-Crankshaft; (30-Teeth) | 1 |
170-6666 Cylinder Block Gp
| 14***67 | Jet As-Piston Cooling | 4 |
| 14***49 | Dowel | 1 |
| 15***55 | Dowel | 2 |
188-5101 Cylinder Block Gp
| 15***55 | Dowel | 2 |
| 15***56 | Seal | 1 |
| 18***01 | Cylinder Block Group | 1 |
205-5491 Cylinder Block Gp
| 06***06 | Plug | 1 |
| 06***07 | Plug | 1 |
| 06***09 | Plug-Facing | 2 |
152-6554 Cylinder Block Gp
| 06***09 | Plug-Facing | 2 |
| 15***54 | Cylinder Block Group | 1 |
| 15***57 | Seal | 2 |
172-6261 Cylinder Block Gp
| 06***06 | Plug | 1 |
| 06***07 | Plug | 1 |
| 06***09 | Plug-Facing | 2 |
171-2792 Cylinder Block Gp
| 15***54 | Cylinder Block Group | 1 |
| 15***55 | Dowel | 2 |
| 15***56 | Seal | 1 |
205-5490 Cylinder Block Gp
| 06***06 | Plug | 2 |
| 06***07 | Plug | 1 |
| 06***09 | Plug-Facing | 2 |
176-2449 Cylinder Block Gp
| 14***67 | Jet As-Piston Cooling | 4 |
| 14***49 | Dowel | 1 |
| 15***55 | Dowel | 2 |
172-6704 Cylinder Head Gp
| 15***57 | Valve-Exhaust | 4 |
| 15***58 | Spring | 8 |
| 15***59 | Cap | 8 |
176-2460 Cylinder Head Gp
| 15***62 | Bolt-Cylinder Head; (M11x1.5x104-mm) | 14 |
| 15***63 | Bolt-Cylinder Head; (M11x1.5-Thd, M8x1.25-Thd) | 4 |
| 15***64 | Gasket-Cylinder Head | 1 |
171-2803 Cylinder Head Gp
| 15***62 | Bolt-Cylinder Head; (M11x1.5x104-mm) | 14 |
| 15***63 | Bolt-Cylinder Head; (M11x1.5-Thd, M8x1.25-Thd) | 4 |
| 15***64 | Gasket-Cylinder Head | 1 |
172-6705 Cylinder Head Gp
| 15***62 | Bolt-Cylinder Head; (M11x1.5x104-mm) | 14 |
| 15***63 | Bolt-Cylinder Head; (M11x1.5-Thd, M8x1.25-Thd) | 4 |
| 15***64 | Gasket-Cylinder Head | 1 |
188-8632 Cylinder Head Gp
| 15***62 | Bolt-Cylinder Head; (M11x1.5x104-mm) | 14 |
| 15***63 | Bolt-Cylinder Head; (M11x1.5-Thd, M8x1.25-Thd) | 4 |
| 15***64 | Gasket-Cylinder Head | 1 |
152-4858 Drain Gp-Engine Oil
| 15***58 | Drain Group-Engine Oil | 1 |
| 15***36 | Valve-Sampling | 1 |
| 5D***26 | Clamp-Band; (9/16 To 1 1/16) | 1 |
176-0759 Drive Gp-Accessory
| 03***93 | Cover | 1 |
| 10***71 | Bolt | 2 |
| 11***26 | Gasket | 1 |
234-9531 Fastener Gp-Engine
| 23***31 | Fastener Group-Engine | 1 |
| 4P***81 | Clip (For Use With 7.9mm Wide Tie Wrap) | 1 |
| 6I***00 | Bolt; (M10x1.5x16-mm) | 1 |
166-3759 Fastener Gp-Engine
| 16***59 | Fastener Group-Engine | 1 |
| 16***60 | Clip | 2 |
153-0077 Flywheel Gp
| 03***39 | Gear-Starter; (112-Teeth) | 1 |
| 15***72 | Flywheel As | 1 |
| 15***73 | Bolt | 8 |
153-1014 Housing Gp-Flywheel
| 10***57 | Plate | 1 |
| 15***13 | Dowel | 2 |
| 15***14 | Housing Group-Flywheel | 1 |
177-2390 Housing Gp-Front
| 10***91 | Plug | 2 |
| 10***05 | Bolt; (M8x1.25x90-mm) | 1 |
| 11***70 | Stud | 2 |
171-2823 Housing Gp-Front
| 10***51 | Bolt; (M8x1.25x65-mm) | 1 |
| 10***91 | Plug | 2 |
| 10***05 | Bolt; (M8x1.25x90-mm) | 1 |
188-8691 Housing Gp-Front
| 10***91 | Plug | 2 |
| 10***05 | Bolt; (M8x1.25x90-mm) | 1 |
| 11***70 | Stud | 2 |
172-6739 Housing Gp-Front
| 10***51 | Bolt; (M8x1.25x65-mm) | 1 |
| 10***53 | Stud | 2 |
| 10***91 | Plug | 2 |
153-0561 Lifting Gp-Engine
| 10***58 | Bolt; (M8x1.25x14-mm) | 4 |
| 15***61 | Lifting Group-Engine | 1 |
| 15***63 | Plate | 2 |
153-1176 Mounting Gp-Alternator
| 15***76 | Mounting Group-Alternator | 1 |
| 6I***54 | Bolt; (M10x1.5x70-mm) | 1 |
142-8850 Mounting Gp-Engine
| 12***80 | Locknut; (M12x1.75-Thd) | 1 |
| 14***50 | Mounting Group-Engine | 1 |
| 14***53 | Bracket As | 1 |
164-7613 Mounting Gp-Starting Motor
| 16***13 | Mounting Group-Starting Motor | 1 |
| 6I***64 | Stud; (M10x1.5x30-mm) | 3 |
202-3185 Pan Gp-Oil
| 10***71 | Bolt | 1 |
| 11***63 | Bolt; (M8x1.25x12-mm) | 1 |
| 15***83 | Clip | 1 |
202-0950 Pan Gp-Oil
| 10***71 | Bolt | 1 |
| 11***63 | Bolt; (M8x1.25x12-mm) | 1 |
| 15***83 | Clip | 1 |
164-7614 Pan Gp-Oil
| 10***71 | Bolt | 1 |
| 11***29 | Bolt; (M8x1.25x75-mm) | 2 |
| 11***63 | Bolt; (M8x1.25x12-mm) | 1 |
178-6260 Pan Gp-Oil
| 10***71 | Bolt | 1 |
| 11***29 | Bolt; (M8x1.25x75-mm) | 2 |
| 11***63 | Bolt; (M8x1.25x12-mm) | 1 |
176-2459 Piston & Rod Gp
| 15***29 | Kit-Piston Ring | 4 |
| 16***90 | Rod As; (Connecting)(B) | 4 |
| 16***91 | Rod As; (Connecting)(D) | 4 |
173-1253 Piston & Rod Gp
| 15***29 | Kit-Piston Ring | 4 |
| 16***90 | Rod As; (Connecting)(B) | 4 |
| 16***91 | Rod As; (Connecting)(D) | 4 |
188-5105 Piston & Rod Gp
| 15***29 | Kit-Piston Ring | 4 |
| 16***90 | Rod As; (Connecting)(B) | 4 |
| 16***91 | Rod As; (Connecting)(D) | 4 |
137-6391 Piston & Rod Gp
| 13***91 | Piston & Rod Group | 1 |
| 15***29 | Kit-Piston Ring | 4 |
| 17***62 | Kit-Piston Ring; (0.5-mm Os) | 4 |
153-0693 Plug Gp-Cylinder Block
| 06***24 | Plug | 1 |
| 15***93 | Plug Group-Cylinder Block | 1 |
153-0567 Plug Gp-Flywheel Housing
| 15***67 | Plug Group-Flywheel Housing | 1 |
| 6H***16 | Plug-Protective | 8 |
153-0319 Pulley Gp-Crankshaft
| 15***14 | Washer | 1 |
| 15***17 | Screw | 1 |
| 15***19 | Pulley Group-Crankshaft | 1 |
171-2808 Valve Mechanism Gp
| 03***62 | Plug | 2 |
| 15***72 | Rocker Arm As | 1 |
| 15***73 | Shaft As-Rocker Arm | 1 |
188-8681 Valve Mechanism Gp
| 03***62 | Plug | 2 |
| 15***72 | Rocker Arm As | 1 |
| 15***73 | Shaft As-Rocker Arm | 1 |
176-9418 Valve Mechanism Gp
| 03***62 | Plug | 1 |
| 15***72 | Rocker Arm As | 1 |
| 15***78 | Nut | 8 |
172-6711 Valve Mechanism Gp
| 03***62 | Plug | 2 |
| 15***72 | Rocker Arm As | 1 |
| 15***73 | Shaft As-Rocker Arm | 1 |
Cooling System
164-7622 Connection Gp-Water
| 12***99 | Bolt; (M10x1.5x40-mm) | 2 |
| 16***22 | Connection Group-Water | 1 |
| 17***87 | Connector | 1 |
173-0410 Cooler Gp-Fltr Base & Eng Oil
| 11***45 | Connector | 1 |
| 16***21 | Bolt | 1 |
| 17***10 | Cooler Group-Filter Base & Eng Oil | 1 |
142-8873 Fan Gp-Blower
| 14***39 | Fan As | 1 |
| 14***70 | Adapter | 1 |
| 14***73 | Fan Group-Blower | 1 |
142-8864 Fan Gp-Blower
| 14***64 | Fan Group-Blower | 1 |
| 14***65 | Fan As | 1 |
| 14***70 | Adapter | 1 |
164-7633 Plug Gp-Water Lines
| 16***33 | Plug Group-Water Lines | 1 |
| 7M***10 | Plug 9.53mm(.375in.)Pipe Thd. | 1 |
173-1281 Pump Gp-Water
| 10***53 | Stud | 4 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
| 12***36 | Clamp-Hose | 2 |
153-0165 Pump Gp-Water
| 10***53 | Stud | 4 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
| 12***36 | Clamp-Hose | 2 |
165-4910 Radiator & Hyd Oil Cooler Gp
| 06***80 | Fitting | 1 |
| 12***27 | Cap As-Radiator | 1 |
| 14***61 | Radiator & Hydraulic Oil Cooler As | 1 |
192-2602 Radiator & Hyd Oil Cooler Gp
| 06***80 | Fitting | 1 |
| 12***27 | Cap As-Radiator | 1 |
| 14***61 | Radiator & Hydraulic Oil Cooler As | 1 |
142-8878 Radiator & Hyd Oil Cooler Gp
| 06***80 | Fitting | 1 |
| 12***27 | Cap As-Radiator | 1 |
| 14***71 | Shroud As | 1 |
180-2997 Radiator & Hyd Oil Cooler Gp
| 06***80 | Fitting | 1 |
| 12***27 | Cap As-Radiator | 1 |
| 14***71 | Shroud As | 1 |
192-2604 Radiator & Hyd Oil Cooler Gp
| 06***80 | Fitting | 1 |
| 12***27 | Cap As-Radiator | 1 |
| 14***71 | Shroud As | 1 |
142-8877 Radiator & Oil Cooler Mtg Gp
| 12***64 | Clamp-Hose; (.76mm Id) | 3 |
| 14***33 | Spacer; (11x14.3x9-mm Thk)(11x14.3x9mm Thk) | 1 |
| 14***66 | Recovery Group-Coolant | 1 |
154-3990 Radiator & Oil Cooler Mtg Gp
| 12***64 | Clamp-Hose; (.76mm Id) | 3 |
| 14***33 | Spacer; (11x14.3x9-mm Thk)(11x14.3x9mm Thk) | 1 |
| 14***66 | Recovery Group-Coolant | 1 |
192-2603 Radiator & Oil Cooler Mtg Gp
| 12***64 | Clamp-Hose; (.76mm Id) | 4 |
| 14***33 | Spacer; (11x14.3x9-mm Thk)(11x14.3x9mm Thk) | 1 |
| 14***66 | Recovery Group-Coolant | 1 |
192-2601 Radiator & Oil Cooler Mtg Gp
| 12***64 | Clamp-Hose; (.76mm Id) | 4 |
| 14***33 | Spacer; (11x14.3x9-mm Thk)(11x14.3x9mm Thk) | 1 |
| 14***66 | Recovery Group-Coolant | 1 |
180-2998 Radiator & Oil Cooler Mtg Gp
| 12***64 | Clamp-Hose; (.76mm Id) | 4 |
| 14***33 | Spacer; (11x14.3x9-mm Thk)(11x14.3x9mm Thk) | 1 |
| 14***66 | Recovery Group-Coolant | 1 |
Electrical And Starting System
3e-7584 Lamp Gp-Head & Signal -Rh
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 18***10 | Lamp; (12-Volt)(Miniature) | 2 |
| 3E***84 | Lamp Group-Head & Turn; -Rh | 1 |
203-5492 Alternator Gp-Charging
| 11***58 | Pulley-Alternator | 1 |
| 11***65 | Kit-Alternator Bearing | 1 |
| 11***66 | Kit-Repair; (Alternator Brushes) | 1 |
142-9108 Alternator Gp-Charging
| 10***99 | Bolt-Socket Head; (M10x1.5x120-mm) | 1 |
| 10***79 | Bolt-Socket Head; (M10x1.5x90-mm) | 1 |
| 10***59 | Spacer; (13.5-mm Thk) | 1 |
142-7496 Battery Gp -Standard
| 14***96 | Battery Group; -Standard | 1 |
| 15***56 | Battery; (12-Volt, Maintenance Free)(24 V) | 1 |
| 19***29 | Clamp | 1 |
142-7520 Battery Gp -Heavy Duty
| 11***22 | Battery Group; (12-Volt, Maintenance Free, Wet) | 1 |
| 14***20 | Battery Group; -Heavy Duty | 1 |
| 19***29 | Clamp | 1 |
154-4233 Control Gp-Interlock
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 15***33 | Control Group-Interlock | 1 |
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
159-5780 Cover Gp-Fuse Panel
| 10***43 | Seal; (32-cm Each) | 0 |
| 11***71 | Puller-Minifuse | 1 |
| 11***89 | Retainer; (Stud) | 4 |
153-0524 Glow Plug Gp
| 15***24 | Glow Plug Group | 1 |
| 15***08 | Cord As-Heater | 1 |
| 16***74 | Element As-Jacket Water Heater; (Engine) | 1 |
168-7575 Heater Gp-Jacket Water
| 16***75 | Heater Group-Jacket Water | 1 |
| 3E***54 | Bolt; (M8x1.25x20-mm) | 1 |
| 6V***89 | Locknut; (M8x1.25-Thd) | 2 |
168-6410 Lamp Gp-Flood
| 10***46 | Lamp; (12-Volt, 4-Watt)(Miniature) | 1 |
| 10***47 | Body As-Lamp | 1 |
| 10***48 | Lens As; (Headlight)(High, Low Beam) | 1 |
142-8637 Lamp Gp-Flood
| 14***37 | Lamp Group-Flood | 1 |
| 3E***54 | Bolt; (M8x1.25x20-mm) | 1 |
| 6V***89 | Locknut; (M8x1.25-Thd) | 2 |
144-9933 Lamp Gp-Panel Illumination -Backlight
| 08***48 | Lamp; (12-Volt, 5-Watt) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 14***33 | Lamp Group-Panel Illumination; -Backlight | 1 |
142-8634 Lamp Gp-Stop & Tail
| 14***34 | Lamp Group-Stop & Tail; -Stop, Tail | 1 |
| 9R***42 | Plug As | 1 |
| 9R***58 | Cord As | 1 |
142-7503 Lamp Gp-Stop & Tail
| 08***48 | Lamp; (12-Volt, 5-Watt) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 14***03 | Lamp Group-Stop & Tail; -12-Volt | 1 |
128-6985 Lamp Gp-Warning Beacon -Amber, Magnetic Mount, Rotating
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 14***50 | Lighting Group-Front | 1 |
| 14***52 | Lighting Group-Stop & Tail | 1 |
169-6689 Lighting Ar-Stop & Flood
| 14***37 | Lamp Group-Flood | 2 |
| 16***89 | Lighting Ar-Stop & Flood | 1 |
| 9D***08 | Grommet | 2 |
142-8650 Lighting Gp-Front
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***50 | Lighting Group-Front | 1 |
| 14***26 | Switch As-Rocker; (Rear Working Lamp) | 1 |
142-9395 Lighting Gp-Rear
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 14***34 | Lamp Group-Stop & Tail; -Stop, Tail | 2 |
| 14***95 | Lighting Group-Rear | 1 |
158-6710 Lighting Gp-Roading
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
203-4331 Lighting Gp-Roading
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***15 | Relay As; (12-Volt)(Junction Box) | 1 |
187-0982 Lighting Gp-Roading
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
180-3009 Lighting Gp-Stop
| 14***03 | Lamp Group-Stop & Tail; -12-Volt | 2 |
| 18***09 | Lighting Group-Stop | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
142-8652 Lighting Gp-Stop & Tail
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 14***52 | Lighting Group-Stop & Tail | 1 |
142-8653 Lighting Gp-Warning Beacon
| 12***97 | Screw-Pan Head; (No 8-32x0.375-In) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 14***53 | Lighting Group-Warning Beacon; -12-Volt | 1 |
178-2254 Electronics Gp-Implement
| 16***58 | Cable | 3 |
| 17***59 | Plug-Glow | 4 |
| 17***54 | Service Group-Work Tool | 1 |
173-1338 Solenoid Gp-Shutoff
| 15***66 | Gasket | 1 |
| 17***09 | Solenoid As; (Shutoff)(Fuel) | 1 |
| 17***38 | Solenoid Group-Shutoff; -Fuel Injection | 1 |
153-0564 Solenoid Gp-Shutoff
| 15***64 | Solenoid Group-Shutoff; -Fuel Injection | 1 |
| 15***66 | Gasket | 1 |
| 17***09 | Solenoid As; (Shutoff)(Fuel) | 1 |
152-4886 Starting Aid Gp
| 11***15 | Relay As; (12-Volt)(Junction Box) | 1 |
| 15***86 | Starting Aid Group | 1 |
| 15***83 | Harness As | 1 |
154-3995 Starting Motor Gp-Electric
| 14***55 | Starting Motor Group-Electric | 1 |
| 15***95 | Starting Motor Group-Electric | 1 |
| 4P***34 | Clip-Ladder; (00800 mm ) | 1 |
144-9955 Starting Motor Gp-Electric
| 10***85 | Cap-Starting Motor | 1 |
| 10***12 | Kit-Contact; (Starting Motor) | 1 |
| 10***18 | Case As-Starting Motor | 1 |
168-7908 Switch Gp-Magnetic -Main Power, Propel Sensor
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***08 | Switch Group-Magnetic; -Main Power, Propel Sensor | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
184-1564 Switch Gp-Pressure -Brake Light
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***64 | Switch Group-Pressure; -Brake Light | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
171-4613 Switch Gp-Pressure -Engine Oil
| 06***07 | Plug | 1 |
| 15***62 | Adaptor | 1 |
| 17***13 | Switch Group-Pressure; -Engine Oil | 1 |
164-8388 Switch Gp-Temperature -Water
| 06***45 | Washer-(640mm Id, .064 Thk.) | 1 |
| 15***52 | Switch-Water Temperature | 1 |
| 16***88 | Switch Group-Temperature; -Water | 1 |
142-8656 Warning Gp-Backup
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***90 | Fuse; (10 Amp) | 1 |
| 14***56 | Warning Group-Backup | 1 |
142-9398 Wiring Gp-Cab
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***27 | Screw-Machine; (M6x1x30-mm) | 4 |
142-9107 Wiring Gp-Electronic Control
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***90 | Fuse; (10 Amp) | 1 |
| 14***05 | Harness As | 1 |
142-9396 Wiring Gp-Engine
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***15 | Relay As; (12-Volt)(Junction Box) | 2 |
| 11***73 | Clip As-Connecting | 1 |
142-9397 Wiring Gp-Machine
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 5 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 3 |
159-5784 Wiring Gp-Work Tool
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 10***42 | Diode Group | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
187-1258 Wiring Gp-Work Tool
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 2 |
| 10***42 | Diode Group | 1 |
| 11***60 | Strap | 1 |
193-8353 Wiring Gp-Work Tool
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 2 |
| 10***42 | Diode Group | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
Engine Arrangement
147-1234 Engine Ar-Primary
| 14***34 | Engine Ar-Primary | 1 |
| 15***77 | Flywheel Group | 1 |
| 15***19 | Pulley Group-Crankshaft | 1 |
147-1233 Engine Ar-Primary
| 13***91 | Piston & Rod Group | 1 |
| 14***33 | Engine Ar-Primary | 1 |
| 15***77 | Flywheel Group | 1 |
159-9214 Engine Ar-Primary
| 15***77 | Flywheel Group | 1 |
| 15***19 | Pulley Group-Crankshaft | 1 |
| 15***24 | Glow Plug Group | 1 |
142-9101 Installation Ar-Engine
| 14***50 | Mounting Group-Engine | 1 |
| 14***03 | Muffler Group | 1 |
| 14***01 | Installation Ar-Engine | 1 |
142-9005 Installation Ar-Engine
| 14***50 | Mounting Group-Engine | 1 |
| 14***77 | Radiator & Oil Cooler Mtg Group | 1 |
| 14***05 | Installation Ar-Engine | 1 |
180-2999 Installation Ar-Engine
| 14***50 | Mounting Group-Engine | 1 |
| 14***08 | Alternator Group-Charging | 1 |
| 15***58 | Drain Group-Engine Oil | 1 |
183-7125 Installation Ar-Engine
| 14***50 | Mounting Group-Engine | 1 |
| 14***77 | Radiator & Oil Cooler Mtg Group | 1 |
| 14***08 | Alternator Group-Charging | 1 |
154-3994 Installation Ar-Engine
| 14***50 | Mounting Group-Engine | 1 |
| 14***57 | Air Cleaner Group | 1 |
| 14***03 | Muffler Group | 1 |
Frame And Body
154-4000 Bumper Gp -Rear
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 15***00 | Bumper Group; -Rear | 1 |
| 18***26 | Tire & Rim Group; -Lh | 2 |
188-3314 Conversion Ar-Roading
| 10***03 | Restrainer | 1 |
| 14***80 | Coupler Group-Quick | 1 |
| 14***10 | Lifting Group-Machine; -4-Point | 1 |
188-3308 Conversion Ar-Roading -Germany
| 17***13 | Box Group-Storage | 1 |
| 17***17 | Conversion Group-Roading; -Italy | 1 |
| 17***28 | Mounting Group-Roading Lights; -Rear | 1 |
175-4242 Conversion Ar-Roading -Italy
| 14***01 | Installation Ar-Engine | 1 |
| 15***10 | Lighting Group-Roading | 1 |
| 17***13 | Box Group-Storage | 1 |
207-9779 Conversion Ar-Roading -Russian
| 14***05 | Installation Ar-Engine | 1 |
| 20***79 | Conversion Ar-Roading; -Russian | 1 |
188-3310 Conversion Ar-Roading -United Kingdom
| 15***10 | Lighting Group-Roading | 1 |
| 17***13 | Box Group-Storage | 1 |
| 17***22 | Visor Group-Cab | 1 |
188-3311 Conversion Ar-Roading -Untied Kingdom
| 10***03 | Restrainer | 1 |
| 14***80 | Coupler Group-Quick | 1 |
| 14***01 | Installation Ar-Engine | 1 |
188-3307 Conversion Ar-Roading -Italy
| 14***80 | Coupler Group-Quick | 1 |
| 14***10 | Lifting Group-Machine; -4-Point | 1 |
| 17***13 | Box Group-Storage | 1 |
175-4244 Conversion Ar-Roading -Europe
| 15***94 | Installation Ar-Engine | 1 |
| 17***13 | Box Group-Storage | 1 |
| 17***17 | Conversion Group-Roading; -Italy | 1 |
166-2567 Conversion Ar-Roading -Germany
| 14***21 | Stud | 2 |
| 15***06 | Boss | 2 |
| 16***67 | Conversion Ar-Roading; -Germany | 1 |
188-3306 Conversion Ar-Roading -Europe
| 14***80 | Coupler Group-Quick | 1 |
| 14***01 | Installation Ar-Engine | 1 |
| 14***10 | Lifting Group-Machine; -4-Point | 1 |
173-3017 Conversion Gp-Roading -Italy
| 17***17 | Conversion Group-Roading; -Italy | 1 |
| 17***33 | Mirror & Mtg Group-Rear View | 1 |
| 18***47 | Lifting Group-Machine; -4-Point | 1 |
175-4232 Conversion Gp-Roading -Germany
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 12***54 | Fastener; (Loop) (22cm) (X3) | 0 |
| 12***55 | Fastener-Hook; (18-cm Each) | 0 |
183-7132 Counterweight Gp
| 17***80 | Block | 14 |
| 18***32 | Counterweight Group | 1 |
| 7X***90 | Washer-Hard; (13.5x44.5x6-mm Thk) | 2 |
183-7139 Counterweight Gp
| 18***31 | Block; (16.90 Kg) | 2 |
| 18***33 | Block; (33.99 Kg)(Lh) | 1 |
| 18***34 | Block; (33.99 Kg)(Rh) | 1 |
185-9941 Counterweight Gp -Kit
| 18***33 | Block; (33.99 Kg)(Lh) | 1 |
| 18***34 | Block; (33.99 Kg)(Rh) | 1 |
| 18***41 | Counterweight Group; -Kit | 1 |
154-4050 Counterweight Gp
| 11***34 | Film-Warning; (Steering) | 1 |
| 15***50 | Counterweight Group | 1 |
| 17***15 | Bracket As | 1 |
154-3991 Enclosure Gp-Engine
| 11***85 | Bumper | 2 |
| 14***01 | Hood As | 1 |
| 14***02 | Door As-Access | 1 |
142-9103 Enclosure Gp-Engine
| 14***03 | Enclosure Group-Engine | 1 |
| 18***31 | Block; (16.90 Kg) | 2 |
| 18***33 | Block; (33.99 Kg)(Lh) | 1 |
142-9075 Frame Gp-Loader
| 11***85 | Bumper | 2 |
| 14***01 | Hood As | 1 |
| 14***02 | Door As-Access | 1 |
150-8621 Guide Gp-Lines
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***31 | Breather; (Fast Fill Service Center) | 2 |
| 14***10 | Plate As | 1 |
188-0147 Lifting Gp-Machine -4-Point
| 14***05 | Plate As | 2 |
| 15***54 | Bracket As-Lift | 1 |
| 15***56 | Plate | 4 |
142-9110 Lifting Gp-Machine -4-Point
| 14***10 | Lifting Group-Machine; -4-Point | 1 |
| 22***15 | Plate As | 1 |
| 24***77 | Bolt; (M8x1.25x12-mm) | 1 |
152-1155 Lifting Gp-Machine -Single Point
| 14***05 | Plate As | 2 |
| 14***26 | Plate-Lift | 4 |
| 15***55 | Lifting Group-Machine; -Single Point | 1 |
175-4233 Mirror & Mtg Gp-Rear View
| 14***26 | Plate-Lift | 4 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 8 |
| 17***33 | Mirror & Mtg Group-Rear View | 1 |
173-3021 Mounting Gp-Registration -With Wiring & Lights
| 13***66 | Mirror Group-Rear View | 2 |
| 14***71 | Clamp; (Top)(Top) | 1 |
| 14***72 | Clamp; (Bottom)(Bottom) | 1 |
175-4228 Mounting Gp-Roading Lights -Rear
| 17***28 | Mounting Group-Roading Lights; -Rear | 1 |
| 17***36 | Plate | 1 |
| 19***62 | Lamp Group-Registration Plate | 1 |
176-0613 Suppression Gp-Sound
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 4 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
Fuel System
142-9261 Control Gp-Governor
| 13***87 | Clip | 2 |
| 14***61 | Control Group-Governor | 1 |
| 14***63 | Spring | 1 |
164-7629 Filter & Lines Gp-Fuel
| 03***47 | Ferrule | 2 |
| 03***00 | Washer; (0.531x0.718x0.064-In Thk) | 2 |
| 03***49 | Plug | 2 |
138-3096 Filter Gp-Fuel
| 10***39 | Nut | 1 |
| 10***40 | Cap; (Fuel Filter) | 1 |
| 10***41 | Seal; (Plunger) | 1 |
130-7092 Filter Gp-Water Sep & Fuel
| 11***18 | Ring-Retaining | 1 |
| 11***19 | Nut | 1 |
| 12***80 | Kit-Water Base; (Water Separator) | 1 |
153-1006 Fitting Gp-Fuel Lines
| 06***68 | Nut-Fuel Line; (1/2-In) | 1 |
| 06***69 | Olive-Fuel Tube | 1 |
| 15***06 | Fitting Group-Fuel Lines | 1 |
188-8819 Governor Gp
| 10***45 | Bolt; (M5x0.8x10-mm) | 4 |
| 13***41 | Washer | 1 |
| 13***12 | Nut | 3 |
173-0122 Governor Gp
| 10***45 | Bolt; (M5x0.8x10-mm) | 4 |
| 13***41 | Washer | 1 |
| 13***12 | Nut | 3 |
171-2929 Governor Gp
| 10***45 | Bolt; (M5x0.8x10-mm) | 4 |
| 13***41 | Washer | 1 |
| 13***12 | Nut | 3 |
178-6225 Governor Gp
| 10***45 | Bolt; (M5x0.8x10-mm) | 4 |
| 13***41 | Washer | 1 |
| 13***12 | Nut | 3 |
142-8843 Lines Gp-Fuel
| 03***00 | Washer; (0.531x0.718x0.064-In Thk) | 2 |
| 03***49 | Plug | 1 |
| 11***08 | Tube | 1 |
170-7498 Pump Gp-Fuel Injection
| 06***98 | Nut; (3/8-24-Thd) | 1 |
| 06***99 | Ferrule | 1 |
| 12***33 | Dowel | 2 |
171-3957 Pump Gp-Fuel Injection
| 06***98 | Nut; (3/8-24-Thd) | 1 |
| 06***99 | Ferrule | 1 |
| 12***33 | Dowel | 2 |
162-9269 Separator Gp-Water
| 11***01 | Bowl As-Water Collection | 1 |
| 11***18 | Ring-Retaining | 1 |
| 11***19 | Nut | 1 |
Hydraulic System
149-0686 Accumulator Gp-Hydraulic -Charged
| 12***18 | Seal; (1000-cm) | 0 |
| 12***37 | Seal | 0 |
| 14***86 | Accumulator Group-Hydraulic; -Charged | 1 |
214-5557 Cylinder & Mtg Gp-Angle Blade
| 16***13 | Kit-Seal | 1 |
| 21***57 | Cylinder & Mtg Group-Angle Blade | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
177-1984 Cylinder & Mtg Gp-Angle Blade
| 06***43 | Ring-Snap | 1 |
| 17***84 | Cylinder & Mtg Group-Angle Blade | 1 |
| 21***55 | Pin As | 1 |
154-5018 Cylinder Gp-Bucket
| 15***18 | Cylinder Group-Bucket | 1 |
| 16***13 | Kit-Seal | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
278-1975 Cylinder Gp-Grapple -Industrial
| 17***58 | Kit-Seal | 1 |
| 21***55 | Rod End As | 1 |
| 27***75 | Cylinder Group-Grapple; -Industrial | 1 |
156-5512 Cylinder Gp-Grapple
| 15***12 | Cylinder Group-Grapple | 1 |
| 17***85 | Kit-Seal | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
164-9295 Cylinder Gp-Grapple
| 16***95 | Cylinder Group-Grapple | 1 |
| 25***97 | Bearing-Sleeve | 1 |
| 25***42 | Bearing-Sleeve | 1 |
278-1969 Cylinder Gp-Hydraulic
| 14***93 | Kit-Seal | 1 |
| 27***69 | Cylinder Group-Hydraulic | 1 |
225-9521 Cylinder Gp-Hydraulic -Angle Blade
| 14***93 | Kit-Seal | 0 |
| 22***21 | Cylinder Group-Hydraulic; -Angle Blade | 1 |
142-9195 Cylinder Gp-Lift -Rh
| 14***92 | Kit-Seal | 1 |
| 14***95 | Cylinder Group-Lift; -Rh | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
142-9196 Cylinder Gp-Lift -Lh
| 14***92 | Kit-Seal | 1 |
| 14***96 | Cylinder Group-Lift; -Lh | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
177-9566 Cylinder Gp-Tilt -Lh
| 14***91 | Lines Group-Pilot | 1 |
| 14***40 | Tank & Mtg Group-Hydraulic | 1 |
| 14***80 | Filter & Mtg Group-Hydraulic | 1 |
177-9565 Cylinder Gp-Tilt -Rh
| 14***91 | Lines Group-Pilot | 1 |
| 14***40 | Tank & Mtg Group-Hydraulic | 1 |
| 14***80 | Filter & Mtg Group-Hydraulic | 1 |
142-9006 Hydraulic Ar
| 14***90 | Control Group-Pilot Operated Hydraulic | 1 |
| 14***06 | Hydraulic Ar | 1 |
| 15***74 | Valve & Mtg Group-Interlock | 1 |
142-9007 Hydraulic Ar
| 14***83 | Control Group-Pilot Operated Hydraulic | 1 |
| 14***64 | Control Group-Pilot Operated Hydraulic | 1 |
| 14***07 | Hydraulic Ar | 1 |
142-9010 Hydraulic Ar
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***10 | Hydraulic Ar | 1 |
| 14***16 | Switch Group-Rocker; -Work Tool Positioner | 1 |
142-9008 Hydraulic Ar
| 14***08 | Hydraulic Ar | 1 |
| 15***72 | Lines Group-Lift Cylinder | 1 |
| 15***73 | Lines Group-Tilt Cylinder | 1 |
142-9017 Hydraulic Ar
| 14***17 | Hydraulic Ar | 1 |
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
142-8715 Hydraulic Ar
| 14***83 | Control Group-Pilot Operated Hydraulic | 1 |
| 14***91 | Lines Group-Pilot | 1 |
| 14***99 | Pump & Mtg Group-Work Tool | 1 |
142-9016 Hydraulic Ar
| 14***16 | Hydraulic Ar | 1 |
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
214-5556 Kit-Angle Blade Cyl & Lines
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
154-5052 Lines Gp-Bucket
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
279-5414 Lines Gp-Bucket -Multipurpose
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***95 | Fitting As; (Quick Disconnect, Male) | 1 |
279-5413 Lines Gp-Bucket -Multipurpose
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
285-6113 Lines Gp-Bucket -Utility
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***95 | Fitting As; (Quick Disconnect, Male) | 1 |
279-5416 Lines Gp-Bucket -Multipurpose
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***95 | Fitting As; (Quick Disconnect, Male) | 1 |
154-5051 Lines Gp-Bucket
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
154-5019 Lines Gp-Bucket
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***95 | Fitting As; (Quick Disconnect, Male) | 1 |
279-5415 Lines Gp-Bucket -Multipurpose
| 14***19 | Connector As | 2 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
279-5412 Lines Gp-Bucket -Industrial
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
269-7271 Lines Gp-Connecting
| 14***09 | Tube As | 1 |
| 14***90 | Elbow Group | 1 |
| 15***31 | Hose | 1 |
177-1986 Lines Gp-Connecting
| 14***16 | Connector Group | 1 |
| 14***90 | Elbow Group | 2 |
| 15***21 | Hose As | 1 |
161-0187 Lines Gp-Grapple
| 14***90 | Elbow Group | 1 |
| 15***41 | Hose As | 1 |
| 16***87 | Lines Group-Grapple; -Industrial | 1 |
165-8733 Lines Gp-Grapple
| 10***29 | Stud; (M10x1.5-Thd) | 1 |
| 14***27 | Connector Group | 2 |
| 15***26 | Hose As | 2 |
214-5558 Lines Gp-Hydraulic
| 14***47 | Elbow; (-12 Orb/Orfs) | 2 |
| 15***26 | Hose As | 2 |
| 15***28 | Tube As | 1 |
154-4040 Lines Gp-Hydraulic Fan
| 14***37 | Block | 4 |
| 14***38 | Plate | 4 |
| 14***97 | Block | 2 |
154-4020 Lines Gp-Hydraulic Fan
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 14***37 | Block | 4 |
| 14***38 | Plate | 4 |
154-4030 Lines Gp-Hydraulic Fan
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 14***37 | Block | 4 |
| 14***38 | Plate | 4 |
154-4055 Lines Gp-Hydraulic Oil Cooler
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 11***61 | Seal Kit; (Includes Seals, Thrust Ring, Stem And Connectors) | 1 |
| 14***37 | Block | 4 |
154-4025 Lines Gp-Hydraulic Oil Cooler
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 11***61 | Seal Kit; (Includes Seals, Thrust Ring, Stem And Connectors) | 1 |
| 14***37 | Block | 4 |
158-6672 Lines Gp-Lift Cylinder
| 10***80 | Elbow Group | 1 |
| 14***13 | Hose As | 2 |
| 14***14 | Hose As | 2 |
142-9201 Lines Gp-Lift Cylinder
| 14***37 | Block | 4 |
| 14***38 | Plate | 4 |
| 14***97 | Block | 2 |
154-4027 Lines Gp-Pilot
| 11***15 | Plate-Cover | 2 |
| 14***98 | Clip | 2 |
| 14***34 | Hose As | 4 |
142-8691 Lines Gp-Pilot
| 14***81 | Hose | 1 |
| 14***91 | Lines Group-Pilot | 1 |
| 14***42 | Adapter | 1 |
158-6677 Lines Gp-Pilot -Work Tool
| 11***15 | Plate-Cover | 2 |
| 14***98 | Clip | 2 |
| 14***34 | Hose As | 4 |
154-4015 Lines Gp-Pump
| 11***15 | Plate-Cover | 2 |
| 14***98 | Clip | 2 |
| 14***42 | Connector Group | 2 |
154-4010 Lines Gp-Pump
| 11***15 | Plate-Cover | 2 |
| 14***98 | Clip | 2 |
| 14***34 | Hose As | 4 |
158-6673 Lines Gp-Tilt Cylinder
| 12***74 | Spacer; (10.3x19x41-mm Thk) | 2 |
| 14***14 | Tube As | 1 |
| 14***44 | Tube As | 1 |
142-9202 Lines Gp-Tilt Cylinder
| 12***74 | Spacer; (10.3x19x41-mm Thk) | 2 |
| 14***14 | Tube As | 1 |
| 14***15 | Tube As | 1 |
158-6666 Lines Gp-Work Tool
| 08***31 | Seal-O-Ring | 1 |
| 15***66 | Lines Group-Work Tool | 1 |
| 18***61 | Gasket | 1 |
142-9047 Lines Gp-Work Tool
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 14***47 | Lines Group-Work Tool | 1 |
| 15***79 | Kit-Seal; (Relief Valve, Conveyor Cont) | 1 |
159-5755 Manifold & Mtg Gp-Control
| 08***31 | Seal-O-Ring | 1 |
| 15***55 | Manifold & Mtg Group-Control | 1 |
| 18***61 | Gasket | 1 |
224-9408 Manifold & Solenoid Gp-Control
| 18***61 | Gasket | 1 |
| 18***62 | Kit-Valve; (Check) | 1 |
| 18***63 | Kit-Valve; (Relief) | 1 |
191-9674 Motor & Mtg Gp-Hydraulic Fan
| 15***12 | Pin | 2 |
| 15***13 | Pin | 2 |
| 19***74 | Motor & Mtg Group-Hydraulic Fan | 1 |
188-0128 Motor Gp-Gear -Hydraulic Fan
| 14***35 | Pump Group-Gear; -Charge | 1 |
| 16***14 | Gasket | 1 |
| 18***28 | Motor Group-Gear; -Hydraulic Fan | 1 |
152-4888 Motor Gp-Gear -Fan
| 15***88 | Motor Group-Gear; -Fan | 1 |
| 15***13 | Plate | 1 |
| 15***41 | Pin | 2 |
185-9948 Motor Gp-Gear
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 1 |
| 18***48 | Motor Group-Gear; -Hydraulic Fan | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
180-2996 Motor Gp-Gear -Fan
| 15***13 | Pin | 2 |
| 18***96 | Motor Group-Gear; -Fan | 1 |
| 6V***89 | Locknut; (M8x1.25-Thd) | 2 |
165-8731 Mounting Gp-Cylinder
| 16***31 | Mounting Group-Cylinder; -Utility | 1 |
| 17***97 | Pump Group-Gear | 1 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 2 |
156-0891 Mounting Gp-Cylinder
| 14***58 | Pump Group-Gear | 1 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 1P***78 | Flange; (To 5v***09 Tube Assembly) | 2 |
154-5011 Mounting Gp-Cylinder
| 14***98 | Pump Group-Piston | 1 |
| 15***11 | Mounting Group-Cylinder | 1 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 2 |
142-8714 Plug Gp-Pilot Valve
| 13***15 | Seal-Shaft | 2 |
| 14***14 | Plug Group-Pilot Valve | 1 |
| 18***67 | Ring-Retaining | 2 |
142-8934 Pump & Mtg Gp-Gear
| 10***41 | Ring-Snap | 1 |
| 13***15 | Seal-Shaft | 1 |
| 14***34 | Pump & Mtg Group-Gear; -Charge | 1 |
142-9048 Pump & Mtg Gp-Work Tool
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 6 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***56 | Seal-O-Ring | 1 |
142-8699 Pump & Mtg Gp-Work Tool
| 14***99 | Pump & Mtg Group-Work Tool | 1 |
142-8935 Pump Gp-Gear -Charge
| 14***35 | Pump Group-Gear; -Charge | 1 |
| 14***57 | Valve Group-Bank 5 | 1 |
| 17***01 | Bracket As | 1 |
177-3397 Pump Gp-Gear
| 17***01 | Bracket As | 1 |
| 17***97 | Pump Group-Gear | 1 |
| 19***71 | Valve Group-Bank 6 | 1 |
142-8698 Pump Gp-Piston
| 14***98 | Pump Group-Piston | 1 |
| 17***01 | Bracket As | 1 |
| 17***66 | Valve Group-Bank 3 | 1 |
142-8940 Tank & Mtg Gp-Hydraulic
| 14***40 | Tank & Mtg Group-Hydraulic | 1 |
| 17***01 | Bracket As | 1 |
| 18***25 | Valve Group-Bank 3 | 1 |
142-8939 Tank Gp-Hydraulic
| 14***39 | Tank Group-Hydraulic | 1 |
| 17***01 | Bracket As | 1 |
| 17***63 | Valve Group-Bank 2 | 1 |
159-5742 Valve & Mtg Gp-Bank
| 13***90 | Bolt-Socket Head; (M8x1.25x120-mm) | 2 |
| 14***11 | Hose As | 2 |
| 14***68 | Elbow Group | 2 |
159-5743 Valve & Mtg Gp-Bank
| 10***80 | Elbow Group | 1 |
| 13***90 | Bolt-Socket Head; (M8x1.25x120-mm) | 2 |
| 14***11 | Hose As | 1 |
142-9253 Valve & Mtg Gp-Bank
| 13***90 | Bolt-Socket Head; (M8x1.25x120-mm) | 2 |
| 14***10 | Tube As | 1 |
| 14***11 | Hose As | 2 |
158-6675 Valve & Mtg Gp-Interlock
| 12***15 | Fitting As; (Quick Disconnect) | 1 |
| 15***50 | Ring-Backup | 2 |
| 15***75 | Valve & Mtg Group-Interlock | 1 |
158-6674 Valve & Mtg Gp-Interlock
| 13***90 | Bolt-Socket Head; (M8x1.25x120-mm) | 3 |
| 14***11 | Hose As | 1 |
| 14***12 | Hose As | 2 |
158-6676 Valve & Mtg Gp-Interlock
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 15***50 | Ring-Backup | 2 |
| 15***76 | Valve & Mtg Group-Interlock | 1 |
178-2263 Valve Gp-Bank 2
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 12***15 | Fitting As; (Quick Disconnect) | 1 |
| 15***50 | Ring-Backup | 2 |
188-3322 Valve Gp-Bank 2
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 12***15 | Fitting As; (Quick Disconnect) | 1 |
| 15***50 | Ring-Backup | 2 |
188-3325 Valve Gp-Bank 3
| 11***04 | Kit-Seal; (Check Valve) | 1 |
| 12***57 | Valve Group-Check | 1 |
| 14***25 | Connector As. | 3 |
178-2266 Valve Gp-Bank 3
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 12***15 | Fitting As; (Quick Disconnect) | 1 |
| 15***50 | Ring-Backup | 2 |
142-9257 Valve Gp-Bank 5
| 11***04 | Kit-Seal; (Check Valve) | 1 |
| 12***57 | Valve Group-Check | 2 |
| 14***57 | Valve Group-Bank 5 | 1 |
195-6771 Valve Gp-Bank 6
| 11***04 | Kit-Seal; (Check Valve) | 1 |
| 12***57 | Valve Group-Check | 1 |
| 14***19 | Manifold | 1 |
9t-7634 Valve Gp-Check
| 11***04 | Kit-Seal; (Check Valve) | 1 |
| 12***57 | Valve Group-Check | 1 |
| 14***44 | Valve Group-Solenoid | 1 |
185-9408 Valve Gp-Interlock Manifold
| 09***07 | Nut; (M12x1.75-Thd) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 14***08 | Grommet | 1 |
155-5650 Valve Gp-Interlock Manifold
| 11***04 | Kit-Seal; (Check Valve) | 1 |
| 12***57 | Valve Group-Check | 1 |
| 14***44 | Valve Group-Solenoid | 1 |
185-9406 Valve Gp-Interlock Manifold
| 11***61 | Seal Kit; (Includes Seals, Thrust Ring, Stem And Connectors) | 1 |
| 18***06 | Valve Group-Interlock Manifold | 1 |
| 20***71 | Valve Group-Manual; (Coupler Pin, Lift Arm Lwr Cont) | 1 |
185-9407 Valve Gp-Interlock Manifold
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***70 | Kit-Pilot Valve; (Lever) | 1 |
| 15***53 | Grommet | 1 |
112-1817 Valve Gp-Manual -Dead Engine, Lift Arm Lower
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 15***70 | Kit-Pilot Valve; (Lever) | 1 |
193-8358 Valve Gp-Pilot
| 03***79 | Seal-O-Ring (Id=10.82mm) | 2 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 2 |
| 15***03 | Service Kit; (Consist Of Seal, Ring And Spring) | 1 |
173-2430 Valve Gp-Pilot -Work Tool
| 03***28 | Seal-O-Ring | 1 |
| 13***76 | Seal-O-Ring | 1 |
| 17***30 | Valve Group-Pilot; -Work Tool | 1 |
142-8687 Valve Gp-Pilot
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 14***87 | Valve Group-Pilot; -Joystick | 1 |
| 15***70 | Kit-Pilot Valve; (Lever) | 1 |
172-6836 Valve Gp-Pilot
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 15***70 | Kit-Pilot Valve; (Lever) | 1 |
| 15***49 | Control Group-Handle | 1 |
142-8689 Valve Gp-Pilot
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 14***89 | Valve Group-Pilot | 1 |
| 15***70 | Kit-Pilot Valve; (Lever) | 1 |
193-8357 Valve Gp-Pilot
| 03***79 | Seal-O-Ring (Id=10.82mm) | 2 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 2 |
| 15***03 | Service Kit; (Consist Of Seal, Ring And Spring) | 1 |
172-6837 Valve Gp-Pilot
| 09***07 | Nut; (M12x1.75-Thd) | 1 |
| 14***08 | Grommet | 1 |
| 15***70 | Kit-Pilot Valve; (Lever) | 1 |
172-6838 Valve Gp-Pilot
| 03***28 | Seal-O-Ring | 1 |
| 13***76 | Seal-O-Ring | 1 |
| 17***38 | Valve Group-Pilot | 1 |
188-0878 Valve Gp-Relief -Main
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***70 | Nut; (1/2-20-2b-Thd) | 2 |
| 18***31 | Valve As | 1 |
185-7709 Valve Gp-Relief
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***48 | Kit-Seal; (Solenoid Valve) | 1 |
| 14***43 | Solenoid As | 1 |
186-0913 Valve Gp-Relief
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
| 16***24 | Nut-Self-Locking; (1/2-28-Thd) | 1 |
| 18***13 | Valve Group-Relief; -Tilt Dump-Line | 1 |
185-7708 Valve Gp-Relief
| 03***79 | Seal-O-Ring (Id=10.82mm) | 3 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 2 |
| 03***69 | Nut; (3/8-24-Thd) | 1 |
186-0909 Valve Gp-Relief -Line
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***35 | Kit-Seal | 1 |
| 12***72 | Cartridge As | 1 |
159-0748 Valve Gp-Solenoid
| 14***52 | Bracket As | 1 |
| 15***48 | Valve Group-Solenoid | 1 |
| 19***98 | Arm As-Lift | 1 |
144-1644 Valve Gp-Solenoid
| 14***96 | Plate As; (Rh) | 1 |
| 14***97 | Plate As; (Lh) | 1 |
| 14***44 | Valve Group-Solenoid | 1 |
173-7832 Valve Gp-Solenoid
| 14***32 | Pin As | 1 |
| 14***80 | Lever | 1 |
| 14***81 | Bracket | 1 |
185-9409 Valve Gp-Solenoid
| 14***32 | Pin As | 1 |
| 14***80 | Lever | 1 |
| 14***81 | Bracket | 1 |
Implements
197-4910 Arm As-Lift
| 14***32 | Pin As | 1 |
| 14***80 | Lever | 1 |
| 14***81 | Bracket | 1 |
195-6798 Arm As-Lift
| 14***32 | Pin As | 1 |
| 14***80 | Lever | 1 |
| 14***81 | Bracket | 1 |
142-9099 Control Gp-Work Tool
| 14***32 | Pin As | 1 |
| 14***80 | Lever | 1 |
| 14***81 | Bracket | 1 |
177-9577 Control Gp-Work Tool
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***40 | Pin | 2 |
| 16***19 | Pin As | 2 |
Lubrication System
164-7616 Filter Gp-Engine Oil
| 11***45 | Connector | 1 |
| 16***16 | Filter Group-Engine Oil | 1 |
| 16***19 | Seal-O-Ring | 1 |
171-2948 Pump Gp-Engine Oil
| 15***80 | Pump As-Engine Oil | 1 |
| 15***83 | Bolt; (M6x1.0x25mm) | 1 |
| 15***85 | Seal-O-Ring | 1 |
178-6239 Pump Gp-Engine Oil
| 15***82 | Dowel | 2 |
| 15***83 | Bolt; (M6x1.0x25mm) | 3 |
| 15***88 | Valve As; (Oil Check)(Engine) | 1 |
173-0140 Pump Gp-Engine Oil
| 15***82 | Dowel | 2 |
| 15***83 | Bolt; (M6x1.0x25mm) | 3 |
| 15***88 | Valve As; (Oil Check)(Engine) | 1 |
188-8820 Pump Gp-Engine Oil
| 15***82 | Dowel | 2 |
| 15***83 | Bolt; (M6x1.0x25mm) | 3 |
| 15***88 | Valve As; (Oil Check)(Engine) | 1 |
Machine Arrangement
154-3999 Chassis Ar
| 14***43 | Lines Group-Fuel | 1 |
| 14***75 | Frame Group-Loader | 1 |
| 14***99 | Control Group-Work Tool | 1 |
142-9002 Chassis Ar
| 14***43 | Lines Group-Fuel | 1 |
| 14***02 | Chassis Ar | 1 |
| 14***75 | Frame Group-Loader | 1 |
177-9564 Chassis Ar
| 14***43 | Lines Group-Fuel | 1 |
| 14***75 | Frame Group-Loader | 1 |
| 14***03 | Enclosure Group-Engine | 1 |
142-9000 Common Ar
| 14***00 | Common Ar | 1 |
| 14***01 | Power Train Ar | 1 |
| 14***02 | Chassis Ar | 1 |
142-9100 Common Ar
| 14***15 | Hydraulic Ar | 1 |
| 14***01 | Power Train Ar | 1 |
| 14***00 | Common Ar | 1 |
142-9200 Common Ar
| 14***07 | Hydraulic Ar | 1 |
| 14***38 | Power Train Ar | 1 |
| 14***00 | Common Ar | 1 |
188-3313 Conversion Ar-Machine
| 14***80 | Coupler Group-Quick | 1 |
| 15***94 | Installation Ar-Engine | 1 |
| 18***13 | Conversion Ar-Machine | 1 |
Operator Station
176-3900 Accumulator Gp-Refrigerant -Uncharged
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 17***00 | Accumulator Group-Refrigerant; -With Desiccant | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
219-7182 Air Conditioner Gp
| 15***78 | Mount As | 2 |
| 15***81 | Mount | 2 |
| 15***90 | Bracket | 1 |
142-9264 Armrest & Mounting Gp
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 16 |
| 10***56 | Plug; (Switch) | 2 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
142-9276 Armrest Gp
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 16 |
| 10***56 | Plug; (Switch) | 2 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
173-3013 Box Gp-Storage
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 16 |
| 10***56 | Plug; (Switch) | 2 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
218-4994 Compressor Gp-Refrigerant
| 11***99 | Gasket; (Air Conditioner Control) | 4 |
| 14***32 | Switch Group-Rocker; (Hydraulic Shutoff Control) | 1 |
| 14***29 | Switch As-Rocker; (Roading Lights) | 1 |
159-5749 Control Gp-Handle
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***32 | Switch Group-Rocker; (Hydraulic Shutoff Control) | 1 |
| 14***29 | Switch As-Rocker; (Roading Lights) | 1 |
159-5750 Control Gp-Handle -Speed & Direction
| 14***62 | Floorplate As | 1 |
| 14***65 | Support As-Lh | 1 |
| 14***67 | Support As-Rh | 1 |
204-1396 Control Gp-Handle -Speed & Direction
| 14***62 | Floorplate As | 1 |
| 15***68 | Strip | 2 |
| 18***32 | Insulation As | 2 |
142-8690 Control Gp-Pilot Operated Hyd
| 0T***44 | Bolt (1.25" Long) | 2 |
| 14***90 | Control Group-Pilot Operated Hydraulic | 1 |
| 6E***49 | Washer; (11x27x6-mm Thk) | 2 |
142-8957 Control Gp-Pilot Operated Hyd
| 0T***44 | Bolt (1.25" Long) | 2 |
| 14***57 | Control Group-Pilot Operated Hydraulic | 1 |
| 6E***49 | Washer; (11x27x6-mm Thk) | 2 |
142-8683 Control Gp-Pilot Operated Hyd
| 12***43 | Seal; (70-cm) | 0 |
| 14***83 | Control Group-Pilot Operated Hydraulic | 1 |
| 18***02 | Bracket As | 1 |
142-8959 Control Gp-Pilot Operated Hyd
| 09***25 | Pin-Clevis | 2 |
| 14***59 | Control Group-Pilot Operated Hydraulic | 1 |
| 15***82 | Spring-Gas; (Non-Locking) | 2 |
142-8964 Control Gp-Pilot Operated Hyd
| 10***57 | Strip; (Locking) (275cm) | 0 |
| 12***37 | Seal | 0 |
| 14***64 | Control Group-Pilot Operated Hydraulic | 1 |
142-8958 Control Gp-Pilot Operated Hyd
| 14***58 | Control Group-Pilot Operated Hydraulic | 1 |
| 14***09 | Seat Group | 1 |
| 14***46 | Bracket | 1 |
142-9269 Cover Gp-Console
| 14***69 | Cover Group-Console | 1 |
| 15***25 | Plate | 1 |
| 15***88 | Window Group-Cab; -Rh | 1 |
142-9274 Cover Gp-Console
| 14***74 | Cover Group-Console | 1 |
| 20***30 | Glass; (Slider) | 1 |
| 20***31 | Glass; (Slider) | 1 |
142-9118 Cover Gp-Instrument Panel -Service Meter
| 14***18 | Cover Group-Instrument Panel; -Service Meter | 1 |
| 20***30 | Glass; (Slider) | 1 |
| 20***31 | Glass; (Slider) | 1 |
159-5800 Door & Mtg Gp-Cab
| 14***63 | Window Group-Cab | 1 |
| 15***00 | Door & Mtg Group-Cab | 1 |
142-9302 Door & Mtg Gp-Cab
| 14***02 | Door & Mtg Group-Cab | 1 |
| 14***62 | Window Group-Cab | 1 |
159-5801 Door Gp-Cab -Polycarbonate
| 12***10 | Film; (Red Stripe)(Red Stripe - 1225 cm) | 0 |
| 15***01 | Door Group-Cab; -Polycarbonate | 1 |
| 16***86 | Film-Stripe; (Rh) | 1 |
218-6431 Door Gp-Cab -Glass
| 12***10 | Film; (Red Stripe)(Red Stripe - 1225 cm) | 0 |
| 16***86 | Film-Stripe; (Rh) | 1 |
| 16***87 | Film-Stripe; (Lh) | 1 |
142-9340 Door Gp-Cab -Glass
| 14***40 | Door Group-Cab; -Glass | 1 |
| 15***88 | Window Group-Cab; -Rh | 1 |
| 15***89 | Window Group-Cab; -Lh | 1 |
218-6441 Door Gp-Cab -Polycarbonate
| 12***10 | Film; (Red Stripe)(Red Stripe - 1225 cm) | 0 |
| 16***86 | Film-Stripe; (Rh) | 1 |
| 16***87 | Film-Stripe; (Lh) | 1 |
223-0616 Door Gp-Cab -Glass
| 15***02 | Filter Group-Fuel; (Primary) | 1 |
| 16***65 | Filter-Fuel; (Water Separator) | 1 |
| 16***73 | Bottle Group-Fluid Sampling | 2 |
152-4881 Duct Gp-Defroster
| 10***30 | Film; (Warning) (Accumulator Pressure) (On Bracket Covering Brake Accumulator) | 1 |
| 14***15 | Film-Instruction; (Relay) | 1 |
| 14***26 | Film-Instruction; (Service Chart) | 1 |
152-4880 Filter Gp-Cab Air
| 15***80 | Filter Group-Cab Air | 1 |
| 15***82 | Plate-Warning; (Ops Certification, Read Omm) | 1 |
| 15***34 | Film-Warning; (Universal) | 1 |
142-7498 Gauge & Warning Gp -Lh
| 10***69 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 14***98 | Gauge & Warning Group; -Lh | 1 |
| 16***12 | Film-Warning; (Cab Tilt Support Lever) | 2 |
142-7499 Gauge & Warning Gp -Rh
| 14***99 | Gauge & Warning Group; -Rh | 1 |
| 17***41 | Film-Caution; (Lift Eye, Tie-Down Location) | 1 |
152-1160 Guard Gp-Rops/Fops
| 10***76 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 15***60 | Guard Group-Rops/Fops | 1 |
| 16***19 | Film-Warning; (Cab Tilt Support Lever) | 2 |
218-6118 Handle Gp-Modular
| 17***43 | Film-Warning; (Engine Start Procedure) | 1 |
| 17***64 | Film-Warning; (Warning/Danger Combination) | 1 |
| 17***69 | Film-Instruction; (Omm) | 1 |
220-8143 Heater & Mtg Gp-Cab
| 12***83 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 16***25 | Film-Warning; (Cab Tilt Support Lever) | 2 |
| 16***60 | Film-Warning; (Universal) | 1 |
222-5721 Heater & Mtg Gp-Cab -Kit
| 10***68 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 16***15 | Film-Warning; (Lift Arm Brace) | 1 |
| 16***20 | Film-Warning; (Universal) | 1 |
183-7130 Heater & Mtg Gp-Cab -Kit
| 10***75 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 16***18 | Film-Warning; (Cab Tilt Support Lever) | 2 |
| 16***55 | Film-Warning; (Quick Coupler) | 1 |
150-8629 Heater & Mtg Gp-Cab
| 10***73 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 15***29 | Heater & Mtg Group-Cab | 1 |
| 16***16 | Film-Warning; (Cab Tilt Support Lever) | 2 |
150-8627 Heater & Mtg Gp-Cab
| 14***60 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 15***27 | Heater & Mtg Group-Cab | 1 |
| 16***20 | Film-Warning; (Cab Tilt Support Lever) | 2 |
150-8624 Heater Gp-Cab
| 15***24 | Heater Group-Cab | 1 |
| 17***45 | Film-Warning; (Engine Start Procedure) | 1 |
| 17***66 | Film-Warning; (Warning/Danger Combination) | 1 |
220-8144 Heater Gp-Cab
| 17***38 | Film-Warning; (Engine Start Procedure) | 1 |
| 17***59 | Film-Warning; (Warning/Danger Combination) | 1 |
| 17***64 | Film-Instruction; (Omm) | 1 |
142-9289 Heater Gp-Cab
| 10***71 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 14***89 | Heater Group-Cab | 1 |
| 16***14 | Film-Warning; (Cab Tilt Support Lever) | 2 |
142-8655 Horn Gp-Electric
| 10***72 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 14***55 | Horn Group-Electric | 1 |
| 16***15 | Film-Warning; (Cab Tilt Support Lever) | 2 |
186-3363 Horn Gp-Electric
| 13***51 | Film-Warning; (Battery) | 1 |
| 16***21 | Film-Warning; (Cab Tilt Support Lever) | 2 |
| 16***56 | Film-Warning; (Universal) | 1 |
266-9189 Kit-Air Cond & Heater Instl
| 16***24 | Film-Warning; (Cab Tilt Support Lever) | 2 |
| 16***61 | Film-Warning; (Quick Coupler) | 1 |
| 16***59 | Film-Warning; (Universal) | 1 |
266-9194 Kit-Air Cond & Heater Instl
| 15***84 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 17***50 | Film-Notice; (Engine Start Procedure) | 1 |
| 17***70 | Film-Warning; (Warning, Danger Combination) | 1 |
266-9216 Kit-Air Conditioner Instl
| 11***67 | Film-Warning; (Cable Connection) | 1 |
| 16***22 | Film-Warning; (Cab Tilt Support Lever) | 2 |
| 16***59 | Film-Warning; (Quick Coupler) | 1 |
266-9207 Kit-Air Conditioner Instl
| 10***70 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 16***13 | Film-Warning; (Cab Tilt Support Lever)(Cab Tilt Support Lever) | 2 |
| 16***27 | Film-Warning; (Quick Coupler)(Quick Coupler) | 1 |
178-2252 Kit-Cab Door & Mounting
| 10***77 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 16***23 | Film-Warning; (Cab Tilt Support Lever) | 2 |
| 16***58 | Film-Warning; (Universal) | 1 |
233-5963 Kit-Cab Door & Mounting -Polycarbonate
| 19***15 | Film-Warning; (Cab Tilt Support Lever) | 2 |
| 19***18 | Film-Warning; (Universal) | 1 |
| 19***21 | Film-Warning; (Battery) | 1 |
178-2253 Kit-Cab Door & Mounting
| 17***53 | Kit-Cab Door & Mounting | 1 |
| 17***48 | Film-Notice; (Engine Start Procedure) | 1 |
| 17***52 | Film-Warning; (Warning/Danger Combination) | 1 |
233-5962 Kit-Cab Door & Mounting -Glass
| 19***53 | Film-Instruction; (Omm) | 1 |
| 19***03 | Film-Warning; (Engine Start Procedure) | 1 |
| 19***49 | Film-Warning; (Quick Coupler) | 1 |
266-9184 Kit-Cab Heater & Mounting
| 19***10 | Film-Identification; (Synthetic Hydraulic Oil, Read Omm) | 1 |
| 26***84 | Kit-Cab Heater & Mounting | 1 |
142-9351 Liner Gp-Cab
| 14***51 | Liner Group-Cab | 1 |
142-9311 Liner-Cab -Gray
| 14***11 | Liner-Cab; -Gray | 1 |
150-8630 Lines Gp-Heater
| 15***30 | Lines Group-Heater | 1 |
150-8628 Lines Gp-Heater
| 15***28 | Lines Group-Heater | 1 |
190-7943 Lines Gp-Heater
| 19***43 | Lines Group-Heater | 1 |
144-9930 Module Gp-Warning Indicator -With Alarm, Function Lights
| 14***30 | Module Group-Warning Indicator; -With Alarm, Function Lights | 1 |
144-9931 Module Gp-Warning Indicator -Without Alarm
| 14***31 | Module Group-Warning Indicator; -Without Alarm | 1 |
223-6539 Module Gp-Warning Indicator -With Alarm
| 22***39 | Module Group-Warning Indicator; -With Alarm | 1 |
161-7522 Motor Gp-Window Wiper
| 16***22 | Motor Group-Window Wiper | 1 |
142-9354 Mounting Gp-Rops
| 14***54 | Mounting Group-Rops | 1 |
142-9300 Operator Ar-Enclosed Rops
| 14***00 | Operator Ar-Enclosed Rops | 1 |
159-5785 Panel Gp-Instrument
| 15***85 | Panel Group-Instrument | 1 |
203-4330 Panel Gp-Instrument
| 20***30 | Panel Group-Instrument | 1 |
158-6702 Panel Gp-Instrument
| 15***02 | Panel Group-Instrument | 1 |
158-6704 Panel Gp-Instrument
| 15***04 | Panel Group-Instrument | 1 |
158-6700 Panel Gp-Instrument
| 15***00 | Panel Group-Instrument | 1 |
152-4889 Platform Gp-Operator
| 15***89 | Platform Group-Operator | 1 |
188-0141 Seal Gp-Cab
| 18***41 | Seal Group-Cab | 1 |
187-3201 Seal Gp-Cab
| 18***01 | Seal Group-Cab | 1 |
142-9307 Seat Belt Gp -Retractable, 3-In
| 14***07 | Seat Belt Group; -Retractable, 3-In | 1 |
142-9306 Seat Belt Gp -Retractable, 2-In
| 14***06 | Seat Belt Group; -Retractable, 2-In | 1 |
220-8082 Seat Belt Gp -Retractable, 2-In
| 22***82 | Seat Belt Group; -Retractable, 2-In | 1 |
142-9308 Seat Belt Gp -Retractable, 3-In
| 14***08 | Seat Belt Group; -Retractable, 3-In | 1 |
142-9303 Seat Belt Gp -Retractable, 2-In
| 14***03 | Seat Belt Group; -Retractable, 2-In | 1 |
220-8080 Seat Belt Gp -Retractable, 2-In
| 22***80 | Seat Belt Group; -Retractable, 2-In | 1 |
220-8081 Seat Belt Gp -Retractable, 3-In
| 22***81 | Seat Belt Group; -Retractable, 3-In | 1 |
220-8083 Seat Belt Gp -Retractable, 3-In
| 22***83 | Seat Belt Group; -Retractable, 3-In | 1 |
142-9310 Seat Gp -Static
| 14***10 | Seat Group; -Static | 1 |
142-9305 Seat Gp -Suspension
| 14***05 | Seat Group; -Suspension | 1 |
142-9304 Seat Gp-Adjustable
| 14***04 | Seat Group-Adjustable | 1 |
177-3403 Spring Gp-Gas
| 17***03 | Spring Group-Gas; -Cab | 1 |
166-2569 Visor Gp-Cab
| 16***69 | Visor Group-Cab | 1 |
173-3022 Visor Gp-Cab
| 17***22 | Visor Group-Cab | 1 |
154-7988 Window Gp-Cab -Rh
| 15***88 | Window Group-Cab; -Rh | 1 |
183-7138 Window Gp-Cab -Kit
| 18***38 | Window Group-Cab; -Kit | 1 |
142-9363 Window Gp-Cab
| 14***63 | Window Group-Cab | 1 |
142-9362 Window Gp-Cab
| 14***62 | Window Group-Cab | 1 |
187-3213 Window Gp-Cab
| 18***13 | Window Group-Cab | 1 |
183-7137 Window Gp-Cab -Kit
| 18***37 | Window Group-Cab; -Kit | 1 |
154-7989 Window Gp-Cab -Lh
| 15***89 | Window Group-Cab; -Lh | 1 |
Power Train
142-9058 Axle Gp
| 14***23 | Housing-Axle | 1 |
| 14***24 | Spindle-Wheel | 1 |
| 14***29 | Spacer; (57.16x69.85x27.54-mm Thk) | 1 |
142-9060 Drive Gp-Tandem
| 10***66 | Bolt; (Self Locking) (M16x2x40mm) | 4 |
| 14***32 | Sprocket; (13-Teeth)(Motor) | 4 |
| 14***33 | Retainer | 2 |
142-8980 Filter & Mtg Gp-Hydraulic
| 14***80 | Filter & Mtg Group-Hydraulic | 1 |
| 19***84 | Filter Group-Oil; -Implement Pilot Oil | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
191-9784 Filter Gp-Oil
| 18***64 | Valve As-Fluid Sampling; (Transmission) | 1 |
| 19***84 | Filter Group-Oil; -Implement Pilot Oil | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
173-3038 Lines Gp-Hydraulic Filter
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***41 | Connector Group | 1 |
| 14***82 | Elbow As | 1 |
154-4035 Lines Gp-Hydraulic Filter
| 14***41 | Connector Group | 1 |
| 14***82 | Elbow As | 1 |
| 15***48 | Elbow As | 1 |
150-8620 Lines Gp-Hydrostatic
| 11***49 | Fitting As; (Quick Disconnect) | 2 |
| 11***44 | Hose As | 1 |
| 13***58 | Hose Assem. | 1 |
142-9040 Lines Gp-Hydrostatic
| 11***44 | Hose As | 1 |
| 13***58 | Hose Assem. | 1 |
| 14***79 | Manifold Group-Return | 1 |
142-8730 Lines Gp-Parking Brake
| 10***30 | Hose Assem. | 1 |
| 14***30 | Lines Group-Parking Brake | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
142-8679 Manifold Gp-Return
| 14***79 | Manifold Group-Return | 1 |
| 14***53 | Manifold Group-Return | 1 |
| 14***77 | Valve Group-Check; (Axle Oil Cooler Bypass) | 1 |
150-8619 Manifold Gp-Return
| 14***53 | Manifold Group-Return | 1 |
| 14***77 | Valve Group-Check; (Axle Oil Cooler Bypass) | 1 |
| 14***16 | Connector Group | 1 |
142-9059 Motor & Mtg Gp-Hydrostatic
| 14***53 | Manifold Group-Return | 1 |
| 14***77 | Valve Group-Check; (Axle Oil Cooler Bypass) | 1 |
| 14***59 | Motor & Mtg Group-Hydrostatic | 1 |
142-9020 Motor Gp-Piston
| 14***20 | Motor Group-Piston | 3 |
| 14***21 | Stud | 16 |
| 8T***22 | Washer-Hard-To Lock Carrier Rollers | 16 |
142-8750 Mounting Gp-Pump
| 03***53 | Seal-O-Ring; (08.92mm Id) | 1 |
| 14***50 | Mounting Group-Pump | 1 |
| 20***17 | Seal-Ring | 1 |
142-9001 Power Train Ar
| 11***56 | Flange; (314mm Od) | 1 |
| 14***19 | Plate-Adapter | 1 |
| 14***01 | Power Train Ar | 1 |
142-9038 Power Train Ar
| 14***30 | Lines Group-Parking Brake | 1 |
| 14***50 | Mounting Group-Pump | 1 |
| 14***38 | Power Train Ar | 1 |
154-4018 Pump Gp-Piston -Hydrostatic
| 14***30 | Lines Group-Parking Brake | 1 |
| 14***50 | Mounting Group-Pump | 1 |
| 14***59 | Motor & Mtg Group-Hydrostatic | 1 |
180-3006 Pump Gp-Piston
| 10***07 | Cradle-Bearing | 2 |
| 10***09 | Bearing | 2 |
| 10***65 | Circlip | 2 |
188-0127 Tire & Rim Gp -Rh
188-0125 Tire & Rim Gp -Rh
188-0126 Tire & Rim Gp -Lh
185-9931 Tire & Rim Gp -Rh
185-8674 Tire & Rim Gp -Lh
185-9928 Tire & Rim Gp -Lh
154-3981 Tire & Rim Gp -Rh
142-9031 Tire & Rim Gp -Rh
185-8675 Tire & Rim Gp -Rh
199-5438 Tire & Rim Gp -Lh
165-4901 Tire & Rim Gp -Heavy-Duty, Lh
188-0118 Tire & Rim Gp -Lh
199-5439 Tire & Rim Gp -Rh
142-9025 Tire & Rim Gp -Rh
| 14***26 | Tire; (12-R16.5) | 1 |
| 14***59 | Wheel As | 1 |
| 14***25 | Tire & Rim Group; -Rh | 1 |
165-4906 Tire & Rim Gp -Heavy-Duty, Lh
188-0119 Tire & Rim Gp -Rh
142-9027 Tire & Rim Gp -Lh
154-3980 Tire & Rim Gp -Lh
185-8676 Tire & Rim Gp -Lh
165-4907 Tire & Rim Gp -Heavy-Duty, Rh
185-9930 Tire & Rim Gp -Lh
142-8728 Tire & Rim Gp -Lh
| 10***07 | Cradle-Bearing | 2 |
| 10***09 | Bearing | 2 |
| 10***65 | Circlip | 2 |
185-8677 Tire & Rim Gp -Rh
142-8737 Tire & Rim Gp -Rh
| 14***26 | Tire; (12-R16.5) | 1 |
| 14***31 | Wheel As | 1 |
| 14***37 | Tire & Rim Group; -Rh | 1 |
185-9929 Tire & Rim Gp -Rh
154-3979 Tire & Rim Gp -Rh
142-8738 Tire & Rim Gp -Lh
| 14***26 | Tire; (12-R16.5) | 1 |
| 14***31 | Wheel As | 1 |
| 14***38 | Tire & Rim Group; -Lh | 1 |
154-3978 Tire & Rim Gp -Lh
188-0124 Tire & Rim Gp -Lh
188-0117 Tire & Rim Gp -Rh
188-0116 Tire & Rim Gp -Lh
165-4902 Tire & Rim Gp -Heavy-Duty, Rh
185-9939 Wheel & Tire Ar -Kit
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***30 | Tire & Rim Group; -Lh | 2 |
| 18***31 | Tire & Rim Group; -Rh | 2 |
142-8646 Wheel & Tire Ar
142-7494 Wheel & Tire Ar -Pneumatic
178-2256 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 16***06 | Tire & Rim Group; -Heavy-Duty, Lh | 2 |
| 16***07 | Tire & Rim Group; -Heavy-Duty, Rh | 2 |
154-3973 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 15***73 | Wheel & Tire Ar; -Heavy Duty | 1 |
| 15***78 | Tire & Rim Group; -Lh | 2 |
187-3238 Wheel & Tire Ar -Low Side Wall
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***38 | Wheel & Tire Ar; -Low Side Wall | 1 |
| 18***16 | Tire & Rim Group; -Lh | 2 |
185-8663 Wheel & Tire Ar -Low Side Wall
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***63 | Wheel & Tire Ar; -Low Side Wall | 1 |
| 18***74 | Tire & Rim Group; -Lh | 2 |
165-4898 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 15***64 | Wheel & Tire Group; (Lh) | 2 |
| 15***65 | Wheel As-Lh | 1 |
154-3972 Wheel & Tire Ar -Heavy Duty
185-8667 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***67 | Wheel & Tire Ar; -Heavy Duty | 1 |
| 18***28 | Tire & Rim Group; -Lh | 2 |
142-7495 Wheel & Tire Ar -Pneumatic
159-5763 Wheel & Tire Ar -Segmented
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 15***63 | Wheel & Tire Ar; -Segmented | 1 |
| 18***30 | Tire-Solid; (33x6x8) | 4 |
185-8662 Wheel & Tire Ar -Low Side Wall
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***62 | Wheel & Tire Ar; -Low Side Wall | 1 |
| 19***38 | Tire & Rim Group; -Lh | 2 |
185-8666 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***66 | Wheel & Tire Ar; -Heavy Duty | 1 |
| 18***76 | Tire & Rim Group; -Lh | 2 |
159-5761 Wheel & Tire Ar -Solid
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 15***80 | Tire & Rim Group; -Lh | 2 |
| 15***81 | Tire & Rim Group; -Rh | 2 |
165-4903 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 16***01 | Tire & Rim Group; -Heavy-Duty, Lh | 2 |
| 16***02 | Tire & Rim Group; -Heavy-Duty, Rh | 2 |
188-0111 Wheel & Tire Ar
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***11 | Wheel & Tire Ar | 1 |
| 18***24 | Tire & Rim Group; -Lh | 2 |
187-3237 Wheel & Tire Ar -Low Side Wall
| 15***62 | Wheel As; (8x16, Solid Tire) | 4 |
| 18***37 | Wheel & Tire Ar; -Low Side Wall | 1 |
187-3239 Wheel & Tire Ar
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***39 | Wheel & Tire Ar | 1 |
| 18***18 | Tire & Rim Group; -Lh | 2 |
Service Equipment And Supplies
166-8837 Film Gp
| 16***37 | Film Group | 1 |
166-8835 Film Gp
| 16***35 | Film Group | 1 |
166-8836 Film Gp
| 16***36 | Film Group | 1 |
177-2955 Kit-Preventive Maintenance
| 17***55 | Kit-Preventive Maintenance | 1 |
192-2698 Plate & Film Gp -Korean
| 19***98 | Plate & Film Group; -Korean | 1 |
179-1989 Plate & Film Gp -Hebrew
| 17***89 | Plate & Film Group; -Hebrew | 1 |
163-5016 Plate & Film Gp
| 16***16 | Plate & Film Group | 1 |
179-1995 Plate & Film Gp -Polish
| 17***95 | Plate & Film Group; -Polish | 1 |
179-1997 Plate & Film Gp -Russian
| 17***97 | Plate & Film Group; -Russian | 1 |
179-1988 Plate & Film Gp -Greek
| 17***88 | Plate & Film Group; -Greek | 1 |
179-1981 Plate & Film Gp -Chinese
| 17***81 | Plate & Film Group; -Chinese | 1 |
176-0614 Plate & Film Gp -Spanish
| 17***14 | Plate & Film Group; -Spanish | 1 |
179-1993 Plate & Film Gp -Japanese
| 17***93 | Plate & Film Group; -Japanese | 1 |
192-2697 Plate & Film Gp -Hungarian
| 19***97 | Plate & Film Group; -Hungarian | 1 |
195-6740 Plate & Film Gp
| 19***40 | Plate & Film Group | 1 |
179-1982 Plate & Film Gp -Czechoslovakian
| 17***82 | Plate & Film Group; -Czechoslovakian | 1 |
179-1991 Plate & Film Gp -Indonesian
| 17***91 | Plate & Film Group; -Indonesian | 1 |
177-7929 Plate & Film Gp
| 17***29 | Plate & Film Group | 1 |
179-1996 Plate & Film Gp -Portuguese
| 17***96 | Plate & Film Group; -Portuguese | 1 |
179-1987 Plate & Film Gp -German
| 17***87 | Plate & Film Group; -German | 1 |
179-1985 Plate & Film Gp -Finnish
| 17***85 | Plate & Film Group; -Finnish | 1 |
179-1983 Plate & Film Gp -Danish
| 17***83 | Plate & Film Group; -Danish | 1 |
158-7505 Plate & Film Gp -English
| 15***05 | Plate & Film Group; -English | 1 |
179-1994 Plate & Film Gp -Norwegian
| 17***94 | Plate & Film Group; -Norwegian | 1 |
179-1986 Plate & Film Gp -French
| 17***86 | Plate & Film Group; -French | 1 |
179-1980 Plate & Film Gp -Arabic
| 17***80 | Plate & Film Group; -Arabic | 1 |
179-1990 Plate & Film Gp -Icelandic
| 17***90 | Plate & Film Group; -Icelandic | 1 |
179-1999 Plate & Film Gp -Turkish
| 17***99 | Plate & Film Group; -Turkish | 1 |
179-1998 Plate & Film Gp -Swedish
| 17***98 | Plate & Film Group; -Swedish | 1 |
179-1992 Plate & Film Gp -Italian
| 17***92 | Plate & Film Group; -Italian | 1 |
179-1984 Plate & Film Gp -Dutch
| 17***84 | Plate & Film Group; -Dutch | 1 |
Work Tools
216-8756 Arm Gp-Material Handling
| 15***77 | Edge | 1 |
| 21***56 | Arm Group-Material Handling | 1 |
179-7201 Arm Gp-Material Handling
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***40 | Pin | 2 |
| 16***19 | Pin As | 2 |
217-4879 Bar Gp-Tooth
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 21***79 | Bar Group-Tooth | 1 |
177-1990 Blade Ar -Angling
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 17***90 | Blade Ar; -Angling | 1 |
177-1989 Blade Ar -Angling
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***80 | Blade Group-Multipurpose Bucket | 1 |
| 16***89 | Tack-Fastener | 4 |
177-1988 Blade As-Angling
| 15***59 | Edge | 1 |
| 17***88 | Blade As-Angling | 1 |
177-1987 Blade As-Angling
| 15***37 | Edge | 1 |
| 17***87 | Blade As-Angling | 1 |
177-1981 Blade Gp-Angling
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 17***81 | Blade Group-Angling | 1 |
177-1982 Blade Gp-Angling
| 15***77 | Edge | 1 |
| 17***82 | Blade Group-Angling | 1 |
279-5406 Blade Gp-Multipurpose Bucket
| 13***85 | Edge Group-Cutting | 1 |
| 27***68 | Bucket As-General Purpose | 1 |
| 27***06 | Blade Group-Multipurpose Bucket | 1 |
279-5385 Blade Gp-Multipurpose Bucket
| 13***83 | Edge Group-Cutting | 1 |
| 27***85 | Blade Group-Multipurpose Bucket | 1 |
| 27***34 | Bucket As-Dirt | 1 |
159-5345 Blade Gp-Multipurpose Bucket
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***45 | Blade Group-Multipurpose Bucket | 1 |
| 16***89 | Tack-Fastener | 4 |
325-7048 Blade Gp-Multipurpose Bucket
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
279-5388 Blade Gp-Multipurpose Bucket
| 13***85 | Edge Group-Cutting | 1 |
| 27***88 | Blade Group-Multipurpose Bucket | 1 |
| 27***40 | Bucket As-Dirt | 1 |
325-7069 Blade Gp-Multipurpose Bucket
| 15***86 | Bucket Group-Grapple; -Industrial | 1 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 15***12 | Cylinder Group-Grapple | 2 |
325-7039 Blade Gp-Multipurpose Bucket
| 13***86 | Edge Group-Cutting | 1 |
| 27***72 | Bucket As-General Purpose | 1 |
| 32***39 | Blade Group-Multipurpose Bucket | 1 |
325-7038 Blade Gp-Multipurpose Bucket
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
159-5347 Blade Gp-Multipurpose Bucket
| 15***47 | Blade Group-Multipurpose Bucket | 1 |
| 19***16 | Edge | 1 |
279-5387 Blade Gp-Multipurpose Bucket
| 13***84 | Edge Group-Cutting | 1 |
| 27***87 | Blade Group-Multipurpose Bucket | 1 |
| 27***37 | Bucket As-Dirt | 1 |
154-5080 Blade Gp-Multipurpose Bucket
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***80 | Blade Group-Multipurpose Bucket | 1 |
| 16***89 | Tack-Fastener | 4 |
279-5396 Blade Gp-Multipurpose Bucket
| 13***84 | Edge Group-Cutting | 1 |
| 27***64 | Bucket As-General Purpose | 1 |
| 27***96 | Blade Group-Multipurpose Bucket | 1 |
279-5384 Blade Gp-Multipurpose Bucket
| 13***87 | Edge Group-Cutting | 1 |
| 26***84 | Bucket Group-Dirt | 1 |
| 27***84 | Blade Group-Multipurpose Bucket | 1 |
325-7058 Blade Gp-Multipurpose Bucket
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 9 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
325-7059 Blade Gp-Multipurpose Bucket
| 15***84 | Bucket Group-Grapple; -Industrial | 1 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 15***12 | Cylinder Group-Grapple | 2 |
279-5395 Blade Gp-Multipurpose Bucket
| 13***86 | Edge Group-Cutting | 1 |
| 27***95 | Blade Group-Multipurpose Bucket | 1 |
| 28***89 | Bucket As-Dirt | 1 |
325-7068 Blade Gp-Multipurpose Bucket
| 15***85 | Bucket Group-Grapple; -Industrial | 1 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 15***12 | Cylinder Group-Grapple | 2 |
279-5405 Blade Gp-Multipurpose Bucket
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
325-7049 Blade Gp-Multipurpose Bucket
| 13***87 | Edge Group-Cutting | 1 |
| 27***76 | Bucket As-General Purpose | 1 |
| 32***49 | Blade Group-Multipurpose Bucket | 1 |
279-5441 Bucket Ar-Dirt
| 16***34 | Grapple & Cylinder Group-Utility | 1 |
| 16***77 | Bucket Group-Utility | 1 |
| 27***41 | Bucket Ar-Dirt | 1 |
279-5438 Bucket Ar-Dirt
| 13***86 | Edge Group-Cutting | 1 |
| 15***25 | Bucket Ar-Grapple; -Industrial | 1 |
| 27***38 | Bucket Ar-Dirt | 1 |
279-5435 Bucket Ar-Dirt
| 13***85 | Edge Group-Cutting | 1 |
| 15***24 | Bucket Ar-Grapple | 1 |
| 27***35 | Bucket Ar-Dirt | 1 |
285-6090 Bucket Ar-Dirt
| 16***34 | Grapple & Cylinder Group-Utility | 1 |
| 16***78 | Bucket Group-Utility | 1 |
| 28***90 | Bucket Ar-Dirt, Turbocharger | 1 |
268-4083 Bucket Ar-Dirt
| 13***84 | Edge Group-Cutting | 1 |
| 15***23 | Bucket Ar-Grapple | 1 |
| 26***83 | Bucket Ar-Dirt | 1 |
279-5369 Bucket Ar-General Purpose
| 27***69 | Bucket Ar-General Purpose | 1 |
| 28***00 | Bucket Ar-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
279-5378 Bucket Ar-General Purpose
| 15***05 | Bucket Group-Multipurpose | 1 |
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
279-5374 Bucket Ar-General Purpose
| 13***87 | Edge Group-Cutting | 1 |
| 27***74 | Bucket Ar-General Purpose | 1 |
| 27***24 | Bucket As-Light Material | 1 |
279-5373 Bucket Ar-General Purpose
| 13***86 | Edge Group-Cutting | 1 |
| 27***73 | Bucket Ar-General Purpose | 1 |
| 27***21 | Bucket As-Light Material | 1 |
279-5377 Bucket Ar-General Purpose
| 19***24 | Edge Group-Cutting | 1 |
| 27***77 | Bucket Ar-General Purpose | 1 |
| 27***29 | Bucket As-Light Material | 1 |
279-5370 Bucket Ar-General Purpose
| 27***70 | Bucket Ar-General Purpose | 1 |
| 28***01 | Bucket Ar-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
279-5365 Bucket Ar-General Purpose
| 27***65 | Bucket Ar-General Purpose | 1 |
| 28***99 | Bucket Group-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
279-5366 Bucket Ar-General Purpose
| 27***66 | Bucket Ar-General Purpose | 1 |
| 28***02 | Bucket Group-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
285-6111 Bucket Ar-Grapple
| 13***85 | Edge Group-Cutting | 1 |
| 27***90 | Bucket Ar-Multipurpose | 1 |
| 28***11 | Bucket Ar-Grapple | 1 |
157-7226 Bucket Ar-Grapple
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 15***04 | Bucket Ar-Multipurpose | 1 |
217-6230 Bucket Ar-Grapple
| 13***84 | Edge Group-Cutting | 1 |
| 21***30 | Bucket Ar-Grapple | 1 |
| 27***82 | Bucket Ar-Multipurpose | 1 |
285-6112 Bucket Ar-Grapple
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
285-6093 Bucket Ar-Grapple
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
| 16***36 | Cover Group-Lines | 1 |
285-6104 Bucket Ar-Grapple
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
| 16***36 | Cover Group-Lines | 1 |
158-6095 Bucket Ar-Grapple
| 14***99 | Tooth Group-Uni | 8 |
| 15***08 | Bucket Ar-Multipurpose | 1 |
| 15***95 | Bucket Ar-Grapple; -Industrial | 1 |
165-8780 Bucket Ar-Grapple -Utility
| 14***99 | Tooth Group-Uni | 8 |
| 15***10 | Bucket Ar-Multipurpose | 1 |
| 16***80 | Bucket Ar-Grapple; -Utility | 1 |
157-7227 Bucket Ar-Grapple
| 13***85 | Edge Group-Cutting | 1 |
| 15***08 | Bucket Ar-Multipurpose | 1 |
| 15***27 | Bucket Ar-Grapple; -Industrial | 1 |
165-8779 Bucket Ar-Grapple
| 13***86 | Edge Group-Cutting | 1 |
| 15***10 | Bucket Ar-Multipurpose | 1 |
| 16***79 | Bucket Ar-Grapple | 1 |
157-7224 Bucket Ar-Grapple
| 15***09 | Bucket Group-Multipurpose | 1 |
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
217-6229 Bucket Ar-Grapple
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 21***29 | Bucket Ar-Grapple | 1 |
157-7223 Bucket Ar-Grapple
| 15***07 | Bucket Group-Multipurpose | 1 |
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
157-7225 Bucket Ar-Grapple -Industrial
| 13***84 | Edge Group-Cutting | 1 |
| 15***04 | Bucket Ar-Multipurpose | 1 |
| 15***25 | Bucket Ar-Grapple; -Industrial | 1 |
279-5425 Bucket Ar-Light Material
| 13***86 | Edge Group-Cutting | 1 |
| 27***98 | Bucket Ar-Multipurpose | 1 |
| 27***25 | Bucket Ar-Light Material | 1 |
279-5430 Bucket Ar-Light Material
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
279-5420 Bucket Ar-Light Material
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
| 16***36 | Cover Group-Lines | 1 |
279-5399 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***99 | Bucket Ar-Multipurpose | 1 |
325-7036 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 32***36 | Bucket Ar-Multipurpose, Protective Cover | 1 |
279-5380 Bucket Ar-Multipurpose
| 14***04 | Bucket As-Dirt | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
279-5390 Bucket Ar-Multipurpose
| 19***22 | Edge | 1 |
| 27***90 | Bucket Ar-Multipurpose | 1 |
154-5049 Bucket Ar-Multipurpose
| 14***35 | Edge | 1 |
| 15***49 | Bucket Ar-Multipurpose | 1 |
325-7050 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***67 | Bucket As-General Purpose | 1 |
279-5381 Bucket Ar-Multipurpose
| 14***37 | Edge | 1 |
| 27***81 | Bucket Ar-Multipurpose | 1 |
279-5398 Bucket Ar-Multipurpose
| 14***35 | Edge | 1 |
| 27***98 | Bucket Ar-Multipurpose | 1 |
154-5047 Bucket Ar-Multipurpose
| 13***86 | Edge Group-Cutting | 1 |
| 15***47 | Bucket Ar-Multipurpose | 1 |
| 28***02 | Bucket Group-Utility | 1 |
325-7066 Bucket Ar-Multipurpose
| 14***35 | Edge | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
| 32***66 | Bucket Ar-Multipurpose | 1 |
325-7056 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***71 | Bucket As-General Purpose | 1 |
279-5382 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 18***16 | Bucket As-Dirt | 1 |
279-5400 Bucket Ar-Multipurpose
| 14***36 | Edge | 1 |
| 27***00 | Bucket Ar-Multipurpose | 1 |
325-7045 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***63 | Bucket As-General Purpose | 1 |
154-5008 Bucket Ar-Multipurpose
| 13***87 | Edge Group-Cutting | 1 |
| 15***08 | Bucket Ar-Multipurpose | 1 |
| 27***03 | Bucket Ar-Multipurpose | 1 |
279-5392 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***92 | Bucket Ar-Multipurpose | 1 |
325-7035 Bucket Ar-Multipurpose
| 14***36 | Edge | 1 |
| 32***35 | Bucket Ar-Multipurpose | 1 |
325-7060 Bucket Ar-Multipurpose
| 19***22 | Edge | 1 |
| 32***60 | Bucket Ar-Multipurpose | 1 |
325-7055 Bucket Ar-Multipurpose
| 14***37 | Edge | 1 |
| 32***55 | Bucket Ar-Multipurpose | 1 |
154-5045 Bucket Ar-Multipurpose
| 13***84 | Edge Group-Cutting | 1 |
| 15***45 | Bucket Ar-Multipurpose | 1 |
| 28***96 | Bucket Group-Utility | 1 |
325-7046 Bucket Ar-Multipurpose
| 14***36 | Edge | 1 |
| 32***46 | Bucket Ar-Multipurpose | 1 |
279-5391 Bucket Ar-Multipurpose
| 14***34 | Edge | 1 |
| 27***91 | Bucket Ar-Multipurpose | 1 |
325-7070 Bucket Ar-Multipurpose
| 14***36 | Edge | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
| 32***70 | Bucket Ar-Multipurpose | 1 |
154-5048 Bucket Ar-Multipurpose
| 14***36 | Edge | 1 |
| 15***48 | Bucket Ar-Multipurpose | 1 |
325-7040 Bucket Ar-Multipurpose
| 14***35 | Edge | 1 |
| 32***40 | Bucket Ar-Multipurpose | 1 |
325-7065 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***75 | Bucket As-General Purpose | 1 |
279-5402 Bucket Ar-Multipurpose
| 14***37 | Edge | 1 |
| 27***02 | Bucket Ar-Multipurpose | 1 |
279-5401 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***01 | Bucket Ar-Multipurpose | 1 |
154-5010 Bucket Ar-Multipurpose
| 15***10 | Bucket Ar-Multipurpose | 1 |
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
154-5046 Bucket Ar-Multipurpose
| 13***85 | Edge Group-Cutting | 1 |
| 15***46 | Bucket Ar-Multipurpose | 1 |
| 28***99 | Bucket Group-Utility | 1 |
154-5004 Bucket Ar-Multipurpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 9 |
| 15***04 | Bucket Ar-Multipurpose | 1 |
154-5050 Bucket Ar-Multipurpose
| 15***27 | Bucket As-Dirt | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***50 | Bucket Ar-Multipurpose | 1 |
279-5403 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***03 | Bucket Ar-Multipurpose | 1 |
285-6095 Bucket Ar-Utility
| 14***37 | Edge | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
| 28***95 | Bucket Ar-Utility | 1 |
285-6101 Bucket Ar-Utility
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***88 | Bucket As-Grapple | 1 |
| 16***89 | Tack-Fastener | 4 |
285-6100 Bucket Ar-Utility
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***87 | Bucket As-Grapple; -Industrial | 1 |
| 16***89 | Tack-Fastener | 4 |
279-5440 Bucket As-Dirt
| 14***36 | Edge | 1 |
| 27***40 | Bucket As-Dirt | 1 |
165-6156 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***56 | Bucket As-Dirt | 1 |
| 16***89 | Tack-Fastener | 4 |
188-2716 Bucket As-Dirt
| 18***16 | Bucket As-Dirt | 1 |
| 19***22 | Edge | 1 |
285-6088 Bucket As-Dirt
| 14***37 | Edge | 1 |
| 28***88 | Bucket As-Dirt | 1 |
141-6704 Bucket As-Dirt
| 14***04 | Bucket As-Dirt | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***89 | Bucket As-Grapple | 1 |
188-3526 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 18***26 | Bucket As-Dirt | 1 |
165-6157 Bucket As-Dirt
| 14***37 | Edge | 1 |
| 16***57 | Bucket As-Dirt | 1 |
285-6089 Bucket As-Dirt
| 13***84 | Edge Group-Cutting | 1 |
| 16***56 | Bucket As-Dirt | 1 |
| 28***89 | Bucket As-Dirt | 1 |
279-5436 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***37 | Bucket As-Utility | 1 |
| 16***89 | Tack-Fastener | 4 |
279-5439 Bucket As-Dirt
| 14***35 | Edge | 1 |
| 27***39 | Bucket As-Dirt | 1 |
152-0227 Bucket As-Dirt
| 15***27 | Bucket As-Dirt | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
268-4089 Bucket As-Dirt
| 22***82 | Edge | 1 |
| 26***89 | Bucket As-Dirt | 1 |
279-5434 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***33 | Bucket As-Utility | 1 |
| 16***89 | Tack-Fastener | 4 |
279-5437 Bucket As-Dirt
| 14***35 | Edge | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
| 27***37 | Bucket As-Dirt | 1 |
279-5433 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***28 | Bucket As-Light Material | 1 |
279-5371 Bucket As-General Purpose
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***41 | Bucket As-Grapple; -Industrial | 1 |
165-6153 Bucket As-General Purpose
| 13***86 | Edge Group-Cutting | 1 |
| 16***53 | Bucket As-General Purpose | 1 |
| 18***26 | Bucket As-Dirt | 1 |
279-5364 Bucket As-General Purpose
| 13***85 | Edge Group-Cutting | 1 |
| 16***53 | Bucket As-General Purpose | 1 |
| 27***64 | Bucket As-General Purpose | 1 |
141-6705 Bucket As-General Purpose
| 13***85 | Edge Group-Cutting | 1 |
| 14***05 | Bucket As-General Purpose | 1 |
| 16***57 | Bucket As-Dirt | 1 |
279-5367 Bucket As-General Purpose
| 14***99 | Tooth Group-Uni | 8 |
| 16***54 | Bucket As-General Purpose | 1 |
| 27***67 | Bucket As-General Purpose | 1 |
279-5368 Bucket As-General Purpose
| 13***86 | Edge Group-Cutting | 1 |
| 16***54 | Bucket As-General Purpose | 1 |
| 27***68 | Bucket As-General Purpose | 1 |
279-5372 Bucket As-General Purpose
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***42 | Bucket As-Grapple; -Industrial | 1 |
165-6154 Bucket As-General Purpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***54 | Bucket As-General Purpose | 1 |
| 16***89 | Tack-Fastener | 4 |
279-5376 Bucket As-General Purpose
| 11***83 | Boss; (M10x1.5-Thd) | 4 |
| 14***36 | Edge | 1 |
| 16***34 | Grapple & Cylinder Group-Utility | 1 |
279-5363 Bucket As-General Purpose
| 14***99 | Tooth Group-Uni | 8 |
| 16***53 | Bucket As-General Purpose | 1 |
| 27***63 | Bucket As-General Purpose | 1 |
279-5375 Bucket As-General Purpose
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***43 | Bucket As-Grapple | 1 |
217-6227 Bucket As-Grapple
| 15***12 | Pin | 2 |
| 15***53 | Clam As-Multipurpose Bucket | 1 |
| 21***27 | Bucket As-Grapple | 1 |
156-0887 Bucket As-Grapple
| 11***83 | Boss; (M10x1.5-Thd) | 4 |
| 14***37 | Edge | 1 |
| 15***87 | Bucket As-Grapple; -Industrial | 1 |
156-0888 Bucket As-Grapple
| 15***88 | Bucket As-Grapple | 1 |
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
156-0889 Bucket As-Grapple
| 13***87 | Edge Group-Cutting | 1 |
| 15***89 | Bucket As-Grapple | 1 |
| 16***15 | Bucket As-Light Material | 1 |
217-6226 Bucket As-Grapple
| 14***32 | Clam As-Multipurpose Bucket | 1 |
| 15***12 | Pin | 2 |
| 21***26 | Bucket As-Grapple | 1 |
169-8943 Bucket As-Grapple
| 15***12 | Pin | 2 |
| 15***70 | Clam As-Multipurpose Bucket | 1 |
| 15***47 | Blade Group-Multipurpose Bucket | 1 |
169-8941 Bucket As-Grapple
| 14***32 | Clam As-Multipurpose Bucket | 1 |
| 15***12 | Pin | 2 |
| 15***45 | Blade Group-Multipurpose Bucket | 1 |
169-8942 Bucket As-Grapple
| 14***05 | Bearing-Sleeve | 4 |
| 14***36 | Edge | 1 |
| 15***12 | Pin | 1 |
279-5424 Bucket As-Light Material
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***24 | Bucket As-Light Material | 1 |
279-5429 Bucket As-Light Material
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***29 | Bucket As-Light Material | 1 |
164-7415 Bucket As-Light Material
| 15***12 | Pin | 2 |
| 15***70 | Clam As-Multipurpose Bucket | 1 |
| 16***15 | Bucket As-Light Material | 1 |
279-5428 Bucket As-Light Material
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***28 | Bucket As-Light Material | 1 |
164-7417 Bucket As-Light Material
| 15***12 | Pin | 2 |
| 16***17 | Bucket As-Light Material | 1 |
| 19***08 | Clam As-Multipurpose Bucket | 1 |
279-5423 Bucket As-Light Material
| 11***83 | Boss; (M10x1.5-Thd) | 1 |
| 13***84 | Edge Group-Cutting | 1 |
| 13***94 | Edge-Cutting | 1 |
279-5421 Bucket As-Light Material
| 11***83 | Boss; (M10x1.5-Thd) | 4 |
| 13***85 | Edge Group-Cutting | 1 |
| 13***95 | Edge-Cutting | 1 |
279-5422 Bucket As-Light Material
| 13***86 | Edge Group-Cutting | 1 |
| 16***47 | Bucket As-Utility | 1 |
| 27***22 | Bucket As-Light Material | 1 |
165-8832 Bucket As-Utility
| 14***05 | Bearing-Sleeve | 4 |
| 14***35 | Edge | 1 |
| 15***38 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
165-8746 Bucket As-Utility
| 16***46 | Bucket As-Utility | 1 |
165-8837 Bucket As-Utility
| 14***05 | Bearing-Sleeve | 4 |
| 15***38 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
| 16***30 | Plate-Identification; (Cat) | 2 |
165-8747 Bucket As-Utility
| 15***35 | Plate-Instruction; (Load Capacity) | 1 |
| 16***47 | Bucket As-Utility | 1 |
| 16***89 | Tack-Fastener | 4 |
285-6098 Bucket As-Utility
| 09***07 | Bolt; (M16x2x120-mm) | 2 |
| 11***83 | Boss; (M10x1.5-Thd) | 4 |
| 13***79 | Washer; (11x32x3-mm Thk) | 2 |
285-6103 Bucket As-Utility
| 09***07 | Bolt; (M16x2x120-mm) | 2 |
| 11***83 | Boss; (M10x1.5-Thd) | 4 |
| 13***79 | Washer; (11x32x3-mm Thk) | 2 |
165-8835 Bucket As-Utility
| 14***05 | Bearing-Sleeve | 4 |
| 14***37 | Edge | 1 |
| 15***38 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
285-6097 Bucket As-Utility
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
165-8833 Bucket As-Utility
| 14***05 | Bearing-Sleeve | 4 |
| 14***36 | Edge | 1 |
| 15***38 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
268-4084 Bucket Gp-Dirt
| 13***95 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 8 |
| 26***84 | Bucket Group-Dirt | 1 |
152-0232 Bucket Gp-Dirt
| 13***93 | Edge-Cutting | 1 |
| 15***32 | Bucket Group-Dirt | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 6 |
188-2719 Bucket Gp-Dirt
| 13***94 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 8 |
| 18***19 | Bucket Group-Dirt | 1 |
152-0231 Bucket Gp-Dirt
| 15***31 | Bucket Group-Dirt | 1 |
| 16***28 | Plate | 1 |
| 5C***53 | Bolt (M6x1.00x16mm); (M6x1x16mm Thk) | 5 |
152-0229 Bucket Gp-General Purpose
| 15***29 | Bucket Group-General Purpose | 1 |
| 16***95 | Washer; (16.5x71.5x3-mm Thk) | 6 |
| 16***77 | Edge As; (Polyethylene) | 1 |
152-0228 Bucket Gp-General Purpose
| 15***28 | Bucket Group-General Purpose | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 7 |
| 19***24 | Edge-Cutting | 1 |
152-0226 Bucket Gp-General Purpose
| 13***97 | Edge-Cutting | 1 |
| 15***26 | Bucket Group-General Purpose | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 11 |
152-0225 Bucket Gp-General Purpose
| 13***96 | Edge-Cutting | 1 |
| 15***25 | Bucket Group-General Purpose | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 11 |
217-6228 Bucket Gp-Grapple
| 16***34 | Grapple & Cylinder Group-Utility | 1 |
| 16***37 | Fork Group-Utility | 1 |
| 21***28 | Bucket Group-Grapple | 1 |
156-0886 Bucket Gp-Grapple
| 15***86 | Bucket Group-Grapple; -Industrial | 1 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 15***12 | Cylinder Group-Grapple | 2 |
165-8730 Bucket Gp-Grapple
| 16***30 | Bucket Group-Grapple; -0.51 Cu M | 1 |
| 16***34 | Grapple & Cylinder Group-Utility | 1 |
| 16***36 | Fork Group-Utility | 1 |
165-8729 Bucket Gp-Grapple
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 15***12 | Cylinder Group-Grapple | 2 |
| 16***87 | Lines Group-Grapple; -Industrial | 1 |
279-5359 Bucket Gp-Grapple -Industrial
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***14 | Fork Group-Grapple; -Industrial | 9 |
| 27***75 | Cylinder Group-Grapple; -Industrial | 2 |
156-0885 Bucket Gp-Grapple
| 15***85 | Bucket Group-Grapple; -Industrial | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 11 |
| 19***24 | Edge-Cutting | 1 |
156-0884 Bucket Gp-Grapple
| 15***84 | Bucket Group-Grapple; -Industrial | 1 |
| 16***95 | Washer; (16.5x71.5x3-mm Thk) | 7 |
| 16***78 | Edge As; (Polyethylene) | 1 |
164-7413 Bucket Gp-Light Material
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***13 | Bucket Group-Light Material | 1 |
| 16***14 | Fork Group-Grapple; -Industrial | 2 |
325-7037 Bucket Gp-Multipurpose
| 16***80 | Positioner Group-Fork | 1 |
| 32***37 | Bucket Group-Multipurpose | 1 |
279-5404 Bucket Gp-Multipurpose
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 9 |
| 27***04 | Bucket Group-Multipurpose | 1 |
279-5383 Bucket Gp-Multipurpose
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
325-7057 Bucket Gp-Multipurpose
| 16***80 | Positioner Group-Fork | 1 |
| 32***57 | Bucket Group-Multipurpose | 1 |
154-5007 Bucket Gp-Multipurpose
| 15***07 | Bucket Group-Multipurpose | 1 |
| 28***10 | Fork Group-Grapple | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
279-5397 Bucket Gp-Multipurpose
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
279-5389 Bucket Gp-Multipurpose
| 16***54 | Tine | 1 |
| 27***89 | Bucket Group-Multipurpose | 1 |
| 3E***70 | Pin; (Spring) | 1 |
325-7047 Bucket Gp-Multipurpose
| 16***80 | Positioner Group-Fork | 1 |
| 32***47 | Bucket Group-Multipurpose | 1 |
154-5009 Bucket Gp-Multipurpose
| 15***09 | Bucket Group-Multipurpose | 1 |
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
325-7067 Bucket Gp-Multipurpose
| 22***29 | Positioner Group-Fork | 1 |
| 32***67 | Bucket Group-Multipurpose | 1 |
154-5005 Bucket Gp-Multipurpose
| 15***05 | Bucket Group-Multipurpose | 1 |
| 28***05 | Fork Group-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
285-6102 Bucket Gp-Utility
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***44 | Fork As; (Utility) | 1 |
165-8777 Bucket Gp-Utility
| 16***77 | Bucket Group-Utility | 1 |
| 22***29 | Positioner Group-Fork | 1 |
165-8836 Bucket Gp-Utility
| 16***36 | Bucket Group-Utility | 1 |
| 16***41 | Tine | 1 |
| 9R***59 | Clip | 1 |
285-6096 Bucket Gp-Utility
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 7 |
| 16***38 | Fork Group-Utility | 1 |
165-8778 Bucket Gp-Utility
| 16***78 | Bucket Group-Utility | 1 |
| 22***29 | Positioner Group-Fork | 1 |
285-6099 Bucket Gp-Utility
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 9 |
| 16***39 | Fork Group-Utility | 1 |
242-9999 Carriage & Fork Ar
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 7 |
| 24***99 | Carriage & Fork Ar | 1 |
242-9998 Carriage & Fork Ar
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***45 | Fork As; (Utility) | 1 |
353-1694 Carriage & Fork Ar
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***89 | Tack-Fastener | 4 |
353-1693 Carriage & Fork Ar
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***89 | Tack-Fastener | 4 |
353-1696 Carriage & Fork Ar
| 16***95 | Cylinder Group-Grapple | 1 |
| 16***31 | Mounting Group-Cylinder; -Utility | 1 |
| 16***33 | Lines Group-Grapple | 1 |
243-0000 Carriage & Fork Ar
| 17***14 | Pin As | 1 |
| 17***55 | Shim; (1-mm Thk) | 1 |
| 17***56 | Shim; (2-mm Thk) | 1 |
353-1697 Carriage & Fork Ar
| 16***95 | Cylinder Group-Grapple | 1 |
| 16***31 | Mounting Group-Cylinder; -Utility | 1 |
| 16***40 | Grapple Group-Utility | 1 |
149-1411 Carriage As-Fork
| 14***11 | Carriage As-Fork | 1 |
| 15***11 | Pin | 4 |
| 15***35 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
237-1975 Carriage Gp-Fork
| 16***86 | Lock As | 1 |
| 16***87 | Plate Group-Roading | 2 |
| 17***15 | Film; (Reflective)(Warning) | 4 |
351-9371 Carriage Gp-Fork
| 17***47 | Pin | 1 |
| 35***71 | Carriage Group-Fork | 1 |
| 9R***01 | Pin-Cotter | 1 |
261-6681 Carriage Gp-Fork
| 03***57 | Washer; (13x26x6-mm Thk) | 2 |
| 17***53 | Plate | 2 |
| 18***97 | Plate Group-Roading; -Lh | 1 |
199-8308 Clam As-Multipurpose Bucket
| 16***63 | Motor-Electric; (12-Volt) | 1 |
| 19***08 | Clam As-Multipurpose Bucket | 1 |
| 24***23 | Head-Pump | 1 |
149-4232 Clam As-Multipurpose Bucket
| 14***32 | Clam As-Multipurpose Bucket | 1 |
| 17***14 | Film-Stripe; (Reflective, Red, White) | 1 |
| 17***15 | Film; (Reflective)(Warning) | 1 |
154-5070 Clam As-Multipurpose Bucket
| 15***70 | Clam As-Multipurpose Bucket | 1 |
| 16***63 | Motor-Electric; (12-Volt) | 1 |
| 17***33 | Head-Pump | 1 |
154-5053 Clam As-Multipurpose Bucket
| 15***53 | Clam As-Multipurpose Bucket | 1 |
| 17***14 | Film-Stripe; (Reflective, Red, White) | 1 |
| 17***15 | Film; (Reflective)(Warning) | 1 |
241-8673 Conversion Gp-Work Tool -Kit, High Flow
| 17***41 | Spring | 4 |
| 17***73 | Plate As | 1 |
| 24***73 | Conversion Group-Work Tool; -Kit, High Flow | 1 |
296-0582 Conversion Gp-Work Tool -Kit, High Flow
| 18***76 | Step As | 1 |
| 29***82 | Conversion Group-Work Tool; -Kit, High Flow | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 6 |
142-9080 Coupler Gp-Quick
| 14***80 | Coupler Group-Quick | 1 |
| 18***86 | Step As | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
188-0142 Coupler Gp-Quick
| 18***42 | Coupler Group-Quick | 1 |
| 2S***08 | Washer-Retaining; (0.531x3.25x0.438-In Thk) | 2 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 1 |
162-5236 Cover Gp-Lines
| 11***14 | Screen; (Water Tank) | 1 |
| 11***15 | Gasket | 1 |
| 16***36 | Cover Group-Lines | 1 |
197-0926 Deflector Gp-Angle Blade
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 06***51 | Clamp | 2 |
| 09***12 | Clip | 2 |
135-9387 Edge Gp-Cutting
| 11***85 | Bumper | 2 |
| 13***87 | Edge Group-Cutting | 1 |
| 14***76 | Armrest Group | 1 |
135-9386 Edge Gp-Cutting
| 13***86 | Edge Group-Cutting | 1 |
| 20***98 | Knob-Control; (Temperature Select) | 1 |
| 23***62 | Cable-Control | 1 |
177-1909 Edge Gp-Cutting -Polyethylene
| 17***14 | Box As-Tool | 1 |
| 17***09 | Edge Group-Cutting; -Polyethylene | 1 |
| 5G***71 | Boss; (M6x1-6h-Thd) | 5 |
164-7424 Edge Gp-Cutting -Polyethylene
| 10***62 | Screw-Machine; (4-40x0.63-In) | 4 |
| 13***16 | Stud-Ball | 2 |
| 14***28 | Locknut; (4-40-Thd) | 4 |
149-5741 Edge Gp-Cutting
| 14***76 | Armrest Group | 1 |
| 14***88 | Plate | 2 |
| 14***41 | Edge Group-Cutting | 1 |
135-9384 Edge Gp-Cutting
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 13***84 | Edge Group-Cutting | 1 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
135-9385 Edge Gp-Cutting
| 13***85 | Edge Group-Cutting | 1 |
195-7124 Edge Gp-Cutting
| 19***24 | Edge Group-Cutting | 1 |
| 22***96 | Seal-O-Ring | 2 |
135-9383 Edge Gp-Cutting
| 13***83 | Edge Group-Cutting | 1 |
| 19***06 | Cap As; (Water Tank) | 1 |
| 19***07 | Fitting-Drain | 1 |
165-8727 Fork Ar-Grapple -Utility
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 15***53 | Grommet | 1 |
| 16***27 | Fork Ar-Grapple; -Utility | 1 |
279-5360 Fork Ar-Grapple -Industrial
| 11***60 | Strap | 1 |
| 14***89 | Valve Group-Pilot | 1 |
| 19***92 | Bracket As | 1 |
162-8139 Fork Ar-Grapple -Industrial
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 15***53 | Grommet | 1 |
| 16***39 | Fork Ar-Grapple; -Industrial | 1 |
285-6115 Fork Ar-Grapple -Utility
| 11***60 | Strap | 1 |
| 14***81 | Bracket | 1 |
| 14***25 | Connector As. | 5 |
279-5350 Fork Ar-Grapple -Industrial
| 11***60 | Strap | 1 |
| 14***89 | Valve Group-Pilot | 1 |
| 14***81 | Bracket | 1 |
163-4812 Fork Ar-Grapple -Industrial
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 15***53 | Grommet | 1 |
| 16***12 | Fork Ar-Grapple; -Industrial | 1 |
285-6114 Fork Ar-Grapple -Utility
| 11***60 | Strap | 1 |
| 14***81 | Bracket | 1 |
| 17***36 | Valve Group-Pilot | 1 |
165-8728 Fork Ar-Grapple -Utility
| 11***60 | Strap | 1 |
| 14***87 | Valve Group-Pilot; -Joystick | 1 |
| 16***28 | Fork Ar-Grapple; -Utility | 1 |
279-5351 Fork Gp-Grapple -Industrial
| 11***60 | Strap | 1 |
| 14***55 | Horn Group-Electric | 1 |
| 14***25 | Connector As. | 5 |
162-8140 Fork Gp-Grapple
| 11***60 | Strap | 1 |
| 14***25 | Connector As. | 5 |
| 15***43 | Connector As. | 1 |
285-6110 Fork Gp-Grapple
| 11***60 | Strap | 1 |
| 14***55 | Horn Group-Electric | 1 |
| 14***81 | Bracket | 1 |
163-4811 Fork Gp-Grapple
| 11***60 | Strap | 1 |
| 14***55 | Horn Group-Electric | 1 |
| 14***81 | Bracket | 1 |
164-9614 Fork Gp-Grapple
| 11***60 | Strap | 1 |
| 14***55 | Horn Group-Electric | 1 |
| 14***81 | Bracket | 1 |
243-0002 Fork Gp-Pallet -Kit
| 12***43 | Seal; (70-cm) | 0 |
| 12***18 | Seal; (1000-cm) | 0 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 8 |
161-2437 Fork Gp-Pallet
| 11***60 | Strap | 1 |
| 14***87 | Valve Group-Pilot; -Joystick | 1 |
| 14***81 | Bracket | 1 |
149-1412 Fork Gp-Pallet
| 11***60 | Strap | 1 |
| 14***55 | Horn Group-Electric | 1 |
| 14***81 | Bracket | 1 |
243-0001 Fork Gp-Pallet -Kit
| 12***43 | Seal; (70-cm) | 0 |
| 12***18 | Seal; (1000-cm) | 0 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 8 |
195-6943 Fork Gp-Pallet
| 14***68 | Plate | 1 |
| 14***70 | Cover | 1 |
| 14***72 | Plate | 1 |
195-6942 Fork Gp-Pallet
243-0003 Fork Gp-Pallet -Kit
| 10***57 | Strip; (Locking) (275cm) | 0 |
| 10***56 | Seal; (275cm) | 0 |
| 10***71 | Clevis | 1 |
151-5134 Fork Gp-Pallet
| 11***60 | Strap | 1 |
| 14***55 | Horn Group-Electric | 1 |
| 14***19 | Connector | 1 |
195-8545 Fork Gp-Pallet
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 2 |
| 15***95 | Cover | 1 |
165-8737 Fork Gp-Utility
| 14***90 | Cover As-Filter | 1 |
| 14***91 | Filter; (Heater Air) | 1 |
| 15***76 | Seal | 1 |
165-8739 Fork Gp-Utility
| 08***77 | Lamp Group-Dome; (12-Volt) | 1 |
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 2 |
| 14***18 | Film-Instruction; (Panel) | 1 |
165-8736 Fork Gp-Utility
| 14***73 | Duct | 1 |
| 15***79 | Seal | 1 |
| 16***36 | Fork Group-Utility | 1 |
165-8738 Fork Gp-Utility
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 4 |
| 14***58 | Switch As-Start; (Key)(Ignition) | 1 |
| 14***19 | Film-Instruction; (Instument Panel) | 1 |
285-6105 Fork Gp-Utility
| 15***61 | Plate As-Fops | 1 |
| 28***05 | Fork Group-Utility | 1 |
| 5P***27 | Seal 10.65m (41.93 In.) | 0 |
165-8732 Fork Gp-Utility
| 10***57 | Strip; (Locking) (275cm) | 0 |
| 10***56 | Seal; (275cm) | 0 |
| 10***71 | Clevis | 1 |
177-1980 Frame Gp-Blade
| 15***53 | Grommet | 1 |
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 17***80 | Frame Group-Blade | 1 |
279-5352 Frame Gp-Fork -Industrial
| 11***92 | Fuse; (20 Amp) | 1 |
| 14***69 | Cover Group-Console | 1 |
| 14***89 | Heater Group-Cab | 1 |
279-5358 Frame Gp-Fork -Industrial
| 11***92 | Fuse; (20 Amp) | 1 |
| 14***69 | Cover Group-Console | 1 |
| 14***89 | Heater Group-Cab | 1 |
165-8734 Grapple & Cylinder Gp-Utility
| 00***10 | Elbow | 1 |
| 11***92 | Fuse; (20 Amp) | 1 |
| 13***53 | Hose; (192.5cm) (X2) | 0 |
285-6116 Grapple & Cylinder Gp-Utility
| 10***55 | Housing-Switch; (Lights) | 1 |
| 11***19 | Switch As-Rocker; (Blower Fan Speed)(Heater Fan) | 1 |
| 11***15 | Relay As; (12-Volt)(Junction Box) | 1 |
165-8740 Grapple Gp-Utility
| 14***70 | Clip | 8 |
| 14***74 | Valve As | 1 |
| 14***90 | Screw-Truss Head | 8 |
225-9522 Kit-Angle Blade
| 20***98 | Knob-Control; (Temperature Select) | 1 |
| 22***22 | Kit-Angle Blade | 1 |
| 23***62 | Cable-Control | 1 |
165-8488 Kit-Roading Plate & Mounting -Angle Blade
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 11***90 | Fuse; (10 Amp) | 1 |
| 15***59 | Wire As-Horn | 1 |
177-9152 Kit-Roading Plate & Mounting -Bucket
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***33 | Spacer; (11x14.3x9-mm Thk)(11x14.3x9mm Thk) | 1 |
175-4238 Lock Gp-Quick Coupler -Mechanical
| 00***10 | Elbow | 1 |
| 09***34 | Spacer; (9x20x10-mm Thk) | 2 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 3 |
184-6097 Plate Gp-Roading -Lh
| 00***10 | Elbow | 1 |
| 09***34 | Spacer; (9x20x10-mm Thk) | 2 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 3 |
184-6098 Plate Gp-Roading -Rh
| 09***34 | Spacer; (9x20x10-mm Thk) | 2 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 3 |
| 10***96 | Clip | 2 |
161-7290 Pump Gp-Diaphragm
| 09***34 | Spacer; (9x20x10-mm Thk) | 2 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 3 |
| 10***96 | Clip | 2 |
247-6742 Pump Gp-Diaphragm
| 09***25 | Pin-Clevis | 1 |
| 14***02 | Door & Mtg Group-Cab | 1 |
| 15***82 | Spring-Gas; (Non-Locking) | 1 |
177-1983 Spring Gp-Blade
| 09***25 | Pin-Clevis | 1 |
| 15***82 | Spring-Gas; (Non-Locking) | 1 |
| 15***83 | Spring As-Gas; (Locking) | 1 |
188-7733 Step Gp-Material Handling Arm
| 14***12 | Liner-Rear Wall | 1 |
| 14***52 | Insulation | 1 |
| 14***53 | Insulation | 1 |
186-3562 Step Gp-Material Handling Arm
| 00***10 | Elbow | 1 |
| 11***92 | Fuse; (20 Amp) | 1 |
| 13***53 | Hose; (192.5cm) (X2) | 0 |
173-7407 Stop Gp-Bucket -Utility
| 17***07 | Stop Group-Bucket; -Utility | 1 |
116-2001 Strainer Gp-Water
| 00***10 | Elbow | 1 |
| 11***01 | Strainer Group-Water | 1 |
| 13***53 | Hose; (192.5cm) (X2) | 0 |
166-2550 Tank & Mtg Gp-Water
| 00***10 | Elbow | 1 |
| 13***53 | Hose; (192.5cm) (X2) | 0 |
| 16***50 | Tank & Mtg Group-Water | 1 |
252-0386 Tank & Mtg Gp-Water -Kit
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 14***34 | Gasket; (Indicator Module) | 1 |
| 25***86 | Tank & Mtg Group-Water; -Kit | 1 |
166-2551 Tank Gp-Water
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 14***34 | Gasket; (Indicator Module) | 1 |
| 16***51 | Tank Group-Water | 1 |
141-4999 Tooth Gp-Uni
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 14***99 | Tooth Group-Uni | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 10 |
248 serial number reference
On the 248, the PIN plate sits on the left side at the rear of the machine, under the left support/lift arm. Read the first three characters as the serial number prefix (identifies model and configuration - 6LZ for the 248), followed by the machine's sequence number. Caterpillar moved to the full 17-character PIN format industry-wide starting around early 2000; machines built before that changeover may carry only the older short-form serial (3-character prefix plus sequence number), while later machines carry the full 17-character PIN with the same 3-character prefix embedded within it. If the plate is illegible or the format is unclear, confirm with your dealer.
| Prefix | Identifies | Notes |
|---|---|---|
| 6LZ | 248 Skid Steer Loader | Only PIN prefix documented for the plain 248 (not the 248B) across independent service and parts literature; machine literature is titled 248 Skid Steer Loader 6LZ01000-UP, powered by 3034 Engine. Engine is the Cat 3034T 4-cylinder turbocharged diesel, rated around 55 kW (74 hp); some spec listings show a 3034C variant at roughly 60 kW (80 hp) gross - treat as the same base engine family and note the output varies by source/configuration. A separate serial listing shows units in service in the 00849-00852 range, below the 01000 start point given in the manual title, so the true production start may run slightly lower than 01000 - confirm exact start with your dealer. The 248B is a distinct, later machine on its own SCL prefix with the Cat 3044C DIT engine; it is out of scope for this 248 (non-B) family and not listed here. |
Frequently asked questions
What engine does the Caterpillar 248 skid steer loader use?
A Cat 3034T/3034C 4-cylinder turbocharged diesel of about 3.0 L displacement, rated near 80 hp gross and 74 hp net at 2600 rpm.
What is the operating weight of the Caterpillar 248?
Roughly 7,300 to 7,550 lb (3,300 to 3,420 kg) depending on configuration; commonly cited at about 7,530 lb (3,415 kg).
What replaced the Caterpillar 248?
The Cat 248B, which uses the Cat 3044C DIT engine and carries an SCL serial prefix rather than the 248's 6LZ prefix.
What 248 owners discuss
What engine does the Cat 248 skid steer actually run, and does it differ from the 236 and 246?
The 248 uses the Caterpillar 3034 4-cylinder direct-injection diesel in turbocharged (3034T) form, rated in the low-60s hp range. The smaller 236 and 246 in the same skid steer family share the 3034 block but in a naturally aspirated tune with less output, so parts interchange at the block level but boost-related components (turbo, intercooler plumbing where fitted, boost sensor) do not swap across models. Owners report the turbo 3034 as generally solid over the long haul, but a cracked connecting rod taking out the block is a known catastrophic failure mode on this engine family - not common, but reported enough on forums to be worth a compression and oil-analysis check on any machine with unknown history. Governor flyweight bolts have also turned up under-torqued from the factory on some units, which shows up as surging or inconsistent rpm hold rather than a hard failure.
Why does a Cat 248 sometimes crank and start, then die the instant the key is released from start to run?
This is a recurring complaint and traces to the fuel shutoff solenoid circuit, not the solenoid itself in most cases. The solenoid has separate hot feeds for start and run; the run-side feed routes through a relay and diode block off the fuse panel, with the shutdown relay's activation signal grounded through the ECM. A fault anywhere in that relay/diode/harness path - not just the solenoid coil - kills fuel the moment start voltage drops away. Chasing it means back-probing the run-side feed with a meter while cycling the key, rather than just swapping the solenoid. Owners have limped a machine home by jumpering battery power straight to the run terminal, but that is a stopgap only - never jumper the start terminal, it will cook the solenoid.
Parking brake and seat belt lights are blinking and the 248 won't move or lift - what's going on?
This is one of the most-reported electrical complaints on the 248/248B interlock system. Once the brake/seat interlock trips, cycling the operator seat or lowering the armrest bar a few times sometimes clears it if the fault is just a lazy seat or bar switch. If it doesn't clear, suspects include the seat switch itself, the armrest/bar switch, the float-detent coil, either pilot valve solenoid, or chafed wiring in the harness routed above the hydraulic tank near the pump - that harness run gets rubbed and shorted to ground over time. Marginal battery voltage can also hold the brake engaged even though the engine cranks fine, since the solenoid needs more voltage to release than to just power electronics. Because this system gates both propulsion and lift function as a safety interlock, have your dealer verify the fix and confirm the parking brake actually holds under load before returning the machine to work.
The hydraulics or drive quit completely on a 248 with the engine still running fine - where do owners look first?
The 248's fan pump doubles as the charge pump for the hydrostatic drive pump, driven off the back of the engine's front cover - a layout unique enough to this model that it trips up people used to other Cat skid steers. That means the fan can spin fine while the drive pump sits dead if the flexible coupling between engine and pump has sheared; zero pressure anywhere in the hydraulic system points straight at that coupling rather than the pump itself. Where there is some pressure but weak performance, owners check implement pump standby pressure (reported healthy at roughly 2.4 MPa / 350 psi or higher) before condemning the pump. Because a failed drive coupling can let the machine roll unexpectedly on a grade, have your dealer verify coupling condition and standby pressure rather than just chasing symptoms.
Is a rapping or knocking noise from the hydraulic pump on startup something to worry about?
Owners have reported a rapping noise from the piston-type hydraulic pump that feeds loader control and high-flow circuits, most noticeable at cold startup and easing off as the machine warms up. Reports on this are thin enough that root cause varies by source - some point to trapped air or thin cold hydraulic oil, others suspect early pump wear - so treat it as a symptom to log and monitor (oil condition, fluid level, noise duration after warm-up) rather than a confirmed defect pattern for the model.
What tire and undercarriage wear should I expect on a 248, and does it point to abuse?
The 248 runs pneumatic tires on an 8-lug wheel in the 30 cm (12 in) section-width class typical of this size skid steer; wear is driven almost entirely by surface and load rather than a factory defect pattern. Multiple tire patches, cupped or scalloped tread, or uneven wear side-to-side usually points to underinflation, hard turning on pavement, or an alignment/frame issue rather than normal aging. On the lift-arm and pivot side, listen and look for play in the arm pivots and cylinder pins during a full lift-and-curl cycle - loose pins or visible weld repair on the arms or loader frame are the classic signs of prior overload rather than routine wear.
What should I actually check when looking at a used Cat 248 before buying?
Start with hydraulic fluid color and clarity pulled from the reservoir - dark, gritty fluid signals neglected service intervals more reliably than the hour meter does. Run the machine through a full lift, tilt, and curl cycle and watch for hesitation or jerkiness (air or worn valve/pump components) and listen for the startup rapping noise reported on some units. Check the engine visually for oil weeping around the block and rod area given the known rod/block failure mode on the 3034, and confirm the parking brake and seat/bar interlock actually releases cleanly without blinking lights, since that circuit is a common failure point. Inspect the loader frame and lift arms for cracks, bends, or weld repair, and check tires for multiple patches or uneven wear. Machines with roughly 2500 to 3500 recorded hours and clean service records tend to be the sweet spot; anything well beyond that with no maintenance paperwork is a harder sell regardless of asking price.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 248 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.