Caterpillarskid steer loader
Caterpillar 246C
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 246C is a medium-frame wheeled skid steer loader from Caterpillar's C-Series compact line, sitting between the smaller 236C/242C and the larger 252C/262C in the range. It runs a turbocharged, direct-injection 4-cylinder Cat 3044C DIT diesel, renamed the Cat C3.4 DIT partway through production as a Series 2, Tier 4 Interim/Stage IIIA update on the same 3.3 L block, rated 55 kW (74 hp) gross and 54 kW (73 hp) net. Operating weight runs around 3,393 kg (7,480 lb) per the factory spec sheet, varying with cab, counterweight, and tire choices. Caterpillar built the 246C from roughly 2007 into the early 2010s under a single documented JAY serial prefix, following the earlier 246 and 246B and preceding the 246D. Buyers could spec standard-flow or High Flow XPS hydraulics, an open or enclosed cab, and a rear counterweight kit for extra rated capacity.
The main running change on the 246C itself was the mid-production engine relabel to meet Tier 4 Interim/Stage IIIA emissions: same basic 3.3 L architecture and output, different electronic controls and nameplate. Caterpillar then replaced the model outright with the 246D around 2013, which carried a redesigned tubular-steel lift arm, an updated version of the same-size engine, and Tier 4 Final emissions controls, later refined again as the 246D3. That succession keeps the 246C squarely relevant in the used and parts market today as the last of the C-Series 246-class loaders: a known quantity for technicians, backed by a broad parts base, with a hydrostatic drivetrain that holds up well past 8,000 hours under consistent service and enough second-hand supply in the field to make it a common rebuild and resale candidate rather than a rare find.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 246C specifications
Engine
| Engine model | Cat C3.4 DIT, 4-cylinder turbocharged diesel |
| Gross power | 55 kW (74 hp) (SAE J1995) |
| Net power | 54 kW (73 hp) (SAE J1349) |
| Displacement | 3.3 L (201 in³) |
| Bore x stroke | 94 mm x 120 mm (3.7 in x 4.7 in) |
| Emissions tier | Meets U.S. EPA Tier 4 Interim / EU Stage IIIA |
Weights
| Operating weight | 3393 kg (7,480 lb) per factory spec sheet. Other published figures run closer to 3348 kg (7,381 lb); the difference reflects cab, counterweight, and tire configuration rather than a different machine. |
| Rated operating capacity | 975 kg (2,150 lb), based on 35% of tipping load |
| Rated operating capacity, with counterweight | Increases by 91 kg (200 lb) with optional internal counterweight, or by 91 kg (200 lb) with optional external counterweight |
| Tipping load | 1950 kg (4,300 lb) |
Dimensions
| Wheelbase | 1240 mm (48.8 in) |
| Length without bucket | 2979 mm (117.2 in) |
| Length with bucket on ground | 3692 mm (145.3 in) |
| Height to top of cab | 2104 mm (82.8 in) |
| Max overall height, arms raised | 3998 mm (157.4 in) |
| Width over tires | 1676 mm (66.0 in) |
| Ground clearance | 225 mm (8.8 in) |
Performance
| Travel speed, standard | 12.5 km/h (7.7 mph), forward and reverse |
| Travel speed, 2-speed option | 19.3 km/h (12.0 mph), forward and reverse |
| Breakout force, tilt cylinder | 3324 kg (7,328 lb) |
| Bucket pin height at max lift | 3122 mm (122.9 in), radial-lift arm |
| Max dump angle | 40 degrees |
| Reach at max lift and dump | 600 mm (23.6 in) |
| Hydraulic flow, standard | 84 L/min (22 gal/min) at 23 000 kPa (3,335 psi) |
| Hydraulic flow, High Flow XPS option | 125 L/min (33 gal/min) at 28 000 kPa (4,061 psi) |
| Hydraulic power, standard system | 31.9 kW (42.8 hp) |
Service capacities (summary)
| Fuel tank | 98 L (26 gal) |
| Hydraulic system, total | 57 L (15 gal) |
| Hydraulic tank | 42 L (11 gal) |
| Engine crankcase (oil) | 10 L (2.6 gal) |
| Cooling system | 14 L (3.7 gal) |
| Chain case, each side | 10 L (2.6 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
246C fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 10 L (2.6 US gal) | Cat DEO or Cat DEO-ULS diesel engine oil, API CI-4/CJ-4 or Cat ECF-3 spec. SAE 10W-30 for cold-weather starts down to about -18°C (0°F). SAE 15W-40 for warmer ambient temperatures above -18°C (0°F). |
| Cooling system | 14 L (3.7 US gal) | Cat ELC (Extended Life Coolant) or Cat DEAC (Diesel Engine Antifreeze/Coolant), premixed 1:1 with water. Freeze protection to about -37°C (-34°F). |
| Fuel tank | 98 L (26 US gal) | No. 2-D diesel fuel. Ultra-low sulfur grade required on the Tier 4 C3.4 DIT engine. |
| Hydraulic tank (reservoir refill) | 35-42 L (9.2-11 US gal); varies by configuration/series | Cat HYDO Advanced 10 (SAE 10W) hydraulic oil. Cat TDTO (TO-4) accepted as an alternate where HYDO is not used. |
| Hydraulic system (tank, lines, and cylinders) | 52-57 L (13.7-15 US gal); varies by configuration/series | Same fluid as hydraulic tank: Cat HYDO Advanced 10, or Cat TDTO (TO-4) as an alternate. |
| Chain case / final drive, each side | 10 L (2.6 US gal) per side | Cat HYDO Advanced 10 or Cat TDTO (TO-4), same oil family used in the hydraulic system. |
| Grease (chassis, lift-arm, and tilt-cylinder pins) | Spec only, no fixed refill volume | Cat Multipurpose Grease (MPGM), NLGI 2, lithium-complex base. Cat Ultra 5Moly grease for heavy-load pin and bushing points where specified. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 246C maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 3,000 h |
|
| Every 8,000 h |
|
Servicing the 246C beyond the schedule
Predictive Maintenance & Fluid Analysis
Run scheduled oil sampling on engine oil, hydraulic oil, and both chain case oils at each service point to catch contamination or wear-metal trends before they become failures. On the C3.4 DIT engine, treat turbocharger oil weeping as an early sign of a restricted crankcase breather, not turbo failure. Track hydrostatic charge and stall pressures over time rather than waiting for a weak-at-idle complaint. Cat HYDO Advanced hydraulic oil with regular sampling can justify extending the 1000-hour hydraulic fluid interval.
Corrective & Common Repairs
Hard starting or stalling on this platform traces more often to trapped air in the fuel system or a dirty fuel filter than to injector failure. Gradual power loss usually means a plugged primary or secondary air filter, not a fuel problem. Drive motor seal weeping, most reported on the left side, needs early attention before contamination reaches the chain case. Run a stall and charge pressure test before condemning a hydrostatic pump for weak low-rpm response, and check joystick connectors for corrosion before swapping position sensors.
Overhaul & Rebuild Points
Well-maintained C3.4 DIT engines and hydrostatic drives on this platform commonly reach 8,000 to 10,000 hours before major work, but duty cycle and service records swing that range widely. At teardown, inspect drive chains and sprockets for stretch, final drive chain case bearings, and turbocharger shaft play. Lift and tilt cylinder reseal is common once bypass shows up as slow or drifting boom function. Budget for injector performance testing and valve lash adjustment at a top-end engine overhaul.
Seasonal & Environment Servicing
Cold-climate starts on the C3.4 DIT benefit from a block heater, correct winter-grade engine oil, and ULSD treated for gel point before temperatures drop. Check coolant concentration for freeze protection every fall rather than assuming last year's fill still protects. In hot, dusty applications, clean or replace cab and engine air filters ahead of the standard 250-hour mark, and keep radiator and hydraulic oil cooler fins clear to prevent heat-soak-related power loss and hydrostatic drive fade.
246C common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 110-6326 | Filter Element As-Air | Air intake service | Check fitment → |
| 110-6331 | Filter Element As-Air | Air intake service | Check fitment → |
| 265-6618 | Filter Element-Cab Air | Air intake service | Check fitment → |
| 265-6619 | Filter Element-Cab Air | Air intake service | Check fitment → |
| 1G-8878 | Filter As-Oil | Hydraulic service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
246C fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 41-04 | 8 Volt DC Supply - voltage below normal | Sensor reference circuit shorted to ground or open. This 8V supply feeds the throttle position sensor and the left/right drive motor speed sensors on this skid steer family | Check the 8V supply harness and connectors for a short to ground or an open circuit before replacing any sensor fed by this line |
| 91-03 / 91-04 | Throttle Position Sensor - voltage above normal / voltage below normal | Open or shorted signal wire, corroded connector, or a failed throttle position sensor. Shows up as erratic idle, no-start, or engine speed that will not respond to the throttle control | Inspect the sensor connector and wiring for damage or corrosion, check sensor output against spec, replace the sensor if the reading is out of range |
| 70-03 / 70-04 | Parking Brake Switch - abnormal (open or grounded) circuit signal | Failed switch contact or damaged wiring. Brake will not release, or the park brake engages at random while driving | Check switch continuity and connector condition, verify wiring continuity back to the ECM, replace the switch if it fails to change state correctly |
| 96-03 / 96-04 | Fuel Level Sensor - voltage above normal / voltage below normal | Sender wiring fault or a failed float/resistive sender. Fuel gauge reads full, empty, or erratic regardless of actual tank level | Check sender ground and wiring, measure sender resistance across the float range, replace the sender if resistance is out of spec |
| 110-03 / 110-04 | Engine Coolant Temperature Sensor - voltage above normal / voltage below normal | Open or shorted sensor circuit, corroded connector, or a failed sensor. Can trigger a false hot-engine warning even with a properly cooled engine | Inspect the connector for corrosion, check sensor resistance against a temperature chart, replace the sensor if the reading is out of range |
| 100-03 / 100-04 | Engine Oil Pressure Sensor - voltage above normal / voltage below normal | Sensor or wiring fault. Triggers a false low-oil-pressure warning or protection response even when actual oil pressure and level are correct | Verify actual oil pressure with a mechanical gauge before condemning the sensor, inspect sensor wiring, replace the sensor if the signal is out of range |
| 2474-03 / 2476-03 | Left Joystick Forward/Reverse and Left/Right Position Sensor - voltage above normal (signal shorted high) | Joystick position sensor or harness fault, often at the flex point in the joystick base, a corroded connector, or an open 5V reference/ground. Commonly causes loss of drive or lift response and a hydraulic lockout | Cycle the key, inspect the joystick harness and connector for damage, swap left/right joysticks to isolate a joystick fault from a harness fault, replace the joystick pod or sensor if confirmed |
| 2475-03 / 2477-03 | Right Joystick Forward/Reverse and Left/Right Position Sensor - voltage above normal (signal shorted high) | Same failure pattern as the left joystick pair: sensor or harness fault, corroded connector, or open 5V reference/ground. Commonly locks out bucket or attachment control | Inspect the joystick harness and connector for damage or corrosion, swap joysticks to isolate the fault, replace the joystick pod or sensor if confirmed |
| 875-02 | Low System Voltage | Battery voltage below roughly 12.0 VDC for 30 or more seconds with the engine running. Weak battery, poor ground connection, or a charging system fault | Test battery condition and charging voltage at the alternator, clean and tighten ground connections, repair the charging circuit if output is low |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
246C attachments & work tools
General-purpose & multi-purpose buckets
Standard general-purpose bucket for this ROC class runs about 0.38 m3 (0.50 yd3) heaped, matched to the roughly 975 kg (2,150 lb) rated operating capacity. Multi-purpose (4-in-1) buckets add a hydraulic clamshell jaw for grading, light dozing and clamping bulky debris. Utility and light-material (high-capacity, low-density) buckets are offered in the same width class for mulch, grain and similar loads.
Pallet forks
Frame-mounted pallet forks with adjustable tine spacing fit this frame size, with tine lengths commonly offered around 900 mm, 1,070 mm and 1,220 mm (36, 42, 48 in). Used for palletized loads, lumber, pipe and other unit loads within the machine's rated operating capacity.
Grapples
Industrial and utility grapple buckets and grapple rakes are offered for this frame size. Rakes sift soil and sort brush, root balls and construction debris; grapple buckets add a hydraulic clamp jaw over a bucket profile for scrap, demolition and recycling material.
Brooms / sweepers
Angle brooms, pickup brooms and utility broom attachments fit this coupler and hydraulic flow range, used for site cleanup and surface clearing. Broom width is matched to the loader's operating width class and runs on the standard auxiliary hydraulic circuit.
Augers
Auger drive units with interchangeable bits are offered for this machine class. Larger bit diameters and harder ground conditions call for the High Flow XPS hydraulic option to keep torque and rotation speed up; smaller bits run on standard flow.
Cold planers
Compact cold planer (asphalt/concrete milling) attachments are built for skid steers in this size range but require the High Flow XPS hydraulic package to reach rated drum torque and cutting rate. Not usable on a standard-flow machine.
Blades and grading tools
Angle blades and dozer-style blade attachments are offered for grading, backfilling and snow work in this frame size, mounted through the same quick-attach coupler as buckets and run on standard hydraulic flow.
Stump grinders, trenchers, tillers
Stump grinders and trenchers sized for this loader class are available, and both lean on higher hydraulic flow (standard or High Flow XPS depending on the specific tool) to sustain cutting torque. Tillers are also offered in the same size range for seedbed and landscape prep.
Coupler / mounting system
The 246C carries a hydraulic quick-coupler at the loader arms, compatible with the industry-standard universal skid-steer quick-attach mounting plate shared across Cat and most other major-brand work tools. Tool pin engagement/release is done from the cab, with auxiliary hydraulic lines connecting through the coupler face for powered attachments.
Hydraulic flow arrangement
Standard auxiliary hydraulic flow is about 84 L/min (22 gpm) at roughly 23,000 kPa (3,335 psi); the optional High Flow XPS package raises flow to about 125 L/min (33 gpm) at higher system pressure, near 28,000 kPa (4,060 psi). Buckets, forks, grapples, blades and brooms run on standard flow; cold planers, larger augers, stump grinders and trenchers need the High Flow XPS arrangement.
Factory configuration options
Recorded factory/dealer options for this model include a rear counterweight kit (raises rated operating capacity from about 975 kg/2,150 lb to roughly 1,065 kg/2,350 lb), two-speed travel, ride control, self-leveling lift linkage, and an enclosed cab with heat and air conditioning. These options change which work tools are practical to run and how the machine handles while carrying them.
Cab guarding options
Enclosed-cab machines in this class offer a choice of glass or polycarbonate door/window glazing for operator protection when running debris-handling tools such as grapples and brush rakes. Hydraulic hose guarding is recommended alongside these tools; confirm exact guarding packages for a given serial range with the dealer.
All 246C assemblies by section
Every catalogued assembly group for the Caterpillar 246C. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
258-3453 Air Cleaner Gp
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 2 |
| 13***43 | Clamp-Hose | 1 |
| 25***11 | Plate | 1 |
258-3320 Air Cleaner Gp
| 15***98 | Band-Mounting | 1 |
| 23***25 | Indicator | 1 |
| 25***20 | Air Cleaner Group | 2 |
280-8294 Air Cleaner Gp
| 28***94 | Air Cleaner Group | 1 |
| 28***55 | Guard As-Exhaust; (Turbocharger) | 1 |
| 28***91 | Flange, Guard-Exhaust; (Manifold) | 1 |
280-8393 Guard Gp-Debris -Turbocharger, Exhaust Manifold
| 27***52 | Guard-Exhaust; (Manifold) | 1 |
| 28***55 | Guard As-Exhaust; (Turbocharger) | 1 |
| 28***93 | Guard Group-Debris; -Turbocharger, Exhaust Manifold | 1 |
272-3062 Kit-Debris Guard -Turbocharger, Exhaust Manifold
| 27***62 | Kit-Debris Guard; -Turbocharger, Exhaust Manifold | 1 |
| 28***55 | Guard As-Exhaust; (Turbocharger) | 1 |
| 28***91 | Flange, Guard-Exhaust; (Manifold) | 1 |
280-8392 Kit-Debris Guard -Turbocharger, Exhaust Manifold
| 28***92 | Kit-Debris Guard; -Turbocharger, Exhaust Manifold | 1 |
| 5I***78 | Gasket | 1 |
| 5I***21 | Elbow Assem. | 1 |
258-2465 Lines Gp-Air
| 09***00 | Washer; (1.5mm Thk) | 2 |
| 25***12 | Clip | 1 |
| 25***65 | Lines Group-Air | 1 |
317-5070 Lines Gp-Air
| 19***60 | Nut; (M8x1.25-Thd) | 8 |
| 23***60 | Bolt | 8 |
| 23***24 | Gasket-Manifold | 1 |
247-6317 Lines Gp-Air
| 24***17 | Lines Group-Air | 1 |
| 25***64 | Hose As | 1 |
| 5P***68 | Clamp-Hose; (Us Sourced) | 1 |
315-7769 Lines Gp-Air
| 23***37 | Clip-Hose | 1 |
| 25***12 | Clip | 1 |
| 31***01 | Screw | 3 |
287-5323 Manifold Gp-Exhaust
| 09***49 | Bolt; (M8x1.25x40-mm) | 12 |
| 23***05 | Manifold-Inlet | 1 |
| 23***06 | Gasket; (Inlet Manifold) | 1 |
287-4832 Manifold Gp-Inlet
| 19***76 | Washer-Hard; (8.8x20x8-mm Thk) | 3 |
| 23***21 | Nut; (M10x1.25-Thd) | 1 |
| 25***19 | Muffler As | 1 |
258-2462 Muffler & Mounting Gp
| 19***76 | Washer-Hard; (8.8x20x8-mm Thk) | 3 |
| 23***21 | Nut; (M10x1.25-Thd) | 1 |
| 25***62 | Muffler & Mounting Group | 1 |
280-8347 Muffler & Mounting Gp
| 09***00 | Washer; (1.5mm Thk) | 3 |
| 19***06 | Gasket | 4 |
| 23***18 | Gasket | 1 |
235-5894 Turbocharger Gp
| 09***00 | Washer; (1.5mm Thk) | 3 |
| 19***06 | Gasket | 4 |
| 23***18 | Gasket | 1 |
315-7768 Turbocharger Gp
| 13***87 | Clip | 1 |
| 19***36 | Insert-Threaded; (M6x1-Thd) | 3 |
| 23***96 | Screw-Flat Head; (M6x1x35-mm) | 4 |
Basic Engine
292-4041 Bearing Gp-Main
| 10***88 | Plate-Thrust; (Standard) | 3 |
| 10***89 | Plate-Thrust; (0.15-mm Os) | 0 |
| 10***90 | Plate-Thrust; (0.35-mm Os) | 0 |
233-5473 Camshaft Gp
| 09***28 | Key | 1 |
| 10***72 | Tappet | 8 |
| 10***73 | Rod-Push | 8 |
315-8329 Camshaft Gp
| 09***28 | Key | 1 |
| 10***72 | Tappet | 8 |
| 10***73 | Rod-Push | 8 |
287-4033 Connecting Rod Gp
| 10***80 | Rod As-Connecting | 4 |
| 12***55 | Bolt-Connecting Rod | 2 |
| 12***56 | Nut | 2 |
233-5480 Cover Gp-Valve Mechanism
| 23***80 | Cover Group-Valve Mechanism | 1 |
| 23***83 | Gasket; (Valve Cover) | 1 |
| 31***98 | Cap-Oil Filler; (Engine) | 1 |
315-7762 Cover Gp-Valve Mechanism
| 09***49 | Bolt; (M8x1.25x40-mm) | 5 |
| 23***83 | Gasket; (Valve Cover) | 1 |
| 31***98 | Cap-Oil Filler; (Engine) | 1 |
314-9860 Crankshaft Gp
| 08***13 | Pin | 2 |
| 09***28 | Key | 2 |
| 13***96 | Nut | 1 |
287-4649 Crankshaft Gp
| 08***13 | Pin | 2 |
| 09***28 | Key | 2 |
| 13***96 | Nut | 1 |
330-7633 Cylinder Block Gp
| 09***41 | Cap | 10 |
| 09***20 | Pin | 2 |
| 10***76 | Bolt-Bearing Cap | 10 |
287-2416 Cylinder Block Gp
| 09***41 | Cap | 4 |
| 09***20 | Pin | 2 |
| 10***62 | Bushing | 1 |
317-5094 Cylinder Block Gp
| 09***20 | Pin | 2 |
| 10***62 | Bushing | 1 |
| 10***76 | Bolt-Bearing Cap | 10 |
233-5500 Cylinder Head Gp
| 21***75 | Cap | 7 |
| 23***53 | Cylinder Head | 1 |
| 23***54 | Bolt; (M12x1.75x115-mm) | 17 |
258-2452 Drain Gp-Engine Oil
| 11***70 | Cap | 1 |
| 1P***78 | Clamp; (Hose) | 1 |
| 21***19 | Adapter | 1 |
235-5890 Flywheel Gp
| 03***39 | Gear-Starter; (112-Teeth) | 1 |
| 22***93 | Bolt; (M12x1.25x30-mm) | 4 |
| 23***91 | Flywheel As | 1 |
314-9861 Flywheel Gp
| 03***39 | Gear-Starter; (112-Teeth) | 1 |
| 22***93 | Bolt; (M12x1.25x30-mm) | 6 |
| 23***91 | Flywheel As | 1 |
287-4830 Gear Gp-Front
| 11***27 | Gear; (46-Teeth) | 1 |
| 11***29 | Gear; (23-Teeth) | 1 |
| 11***83 | Gear As-Idler; (49-Teeth) | 1 |
315-7766 Gear Gp-Front
| 11***27 | Gear; (46-Teeth) | 1 |
| 11***29 | Gear; (23-Teeth) | 1 |
| 11***85 | Gear-Pump; (Oil, 31-Teeth) | 1 |
258-2469 Guard Gp-Belt
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 4 |
| 13***22 | Bolt-Locking; (M8x1.25x16-mm) | 2 |
| 25***43 | Guard-Belt | 1 |
280-8407 Guard Gp-Belt
| 09***15 | Lockwasher | 2 |
| 10***80 | Gasket-Rear | 1 |
| 11***15 | Seal As-Oil | 1 |
287-3357 Housing Gp-Flywheel
| 10***80 | Gasket-Rear | 1 |
| 11***15 | Seal As-Oil | 1 |
| 14***17 | Bolt; (M10x1.25x25-mm) | 10 |
315-7764 Housing Gp-Flywheel
| 09***29 | Seal-O-Ring (Id=139.5mm); (Id=139.50mm) | 1 |
| 10***77 | Gasket-Front Plate | 1 |
| 11***47 | Gasket; (Gear Case) | 1 |
315-8336 Housing Gp-Front
| 09***29 | Seal-O-Ring (Id=139.5mm); (Id=139.50mm) | 1 |
| 10***77 | Gasket-Front Plate | 1 |
| 11***47 | Gasket; (Gear Case) | 1 |
316-9040 Housing Gp-Front
| 19***05 | Bolt As | 4 |
| 23***66 | Eye | 1 |
| 23***68 | Gasket; (Rear Head) | 1 |
287-3074 Housing Gp-Front
| 09***00 | Washer; (1.5mm Thk) | 2 |
| 09***29 | Seal-O-Ring (Id=139.5mm); (Id=139.50mm) | 1 |
| 19***12 | Bolt; (M6x1x18-mm) | 4 |
315-7761 Lifting Gp-Engine
| 11***90 | Mount As | 2 |
| 12***80 | Locknut; (M12x1.75-Thd) | 1 |
| 14***88 | Mount-Engine | 2 |
287-1844 Lifting Gp-Engine
| 23***66 | Eye | 1 |
| 23***68 | Gasket; (Rear Head) | 1 |
| 28***44 | Lifting Group-Engine | 1 |
258-2447 Mounting Gp-Engine
| 16***01 | Sealant-Silicone | 0 |
| 19***03 | Bolt As | 1 |
| 23***11 | Washer | 1 |
287-3921 Pan Gp-Oil
| 09***82 | Gasket, Oil Drain | 1 |
| 13***32 | Plug; (Drain, Engine Oil) | 1 |
| 16***01 | Sealant-Silicone | 1 |
315-7765 Pan Gp-Oil
| 09***82 | Gasket, Oil Drain | 1 |
| 13***32 | Plug; (Drain, Engine Oil) | 1 |
| 16***01 | Sealant-Silicone | 1 |
317-5082 Pan Gp-Oil
| 22***04 | Set-Piston Ring; (Standard) | 4 |
| 23***14 | Piston; (Standard) | 4 |
| 23***15 | Pin-Piston | 4 |
315-8348 Piston Gp
| 31***48 | Piston Group | 1 |
| 5I***05 | Plug | 6 |
235-5889 Piston Gp
| 21***97 | Ring | 8 |
| 23***15 | Pin-Piston | 4 |
| 23***89 | Piston Group | 1 |
287-2983 Plug Gp-Engine
| 28***83 | Plug Group-Engine; -Cylinder Block, Rh | 1 |
| 28***48 | Pulley-Crankshaft | 1 |
287-2922 Plug Gp-Engine
| 19***11 | Plug | 1 |
| 28***22 | Plug Group-Engine; -Cylinder Block, Lh | 1 |
301-3396 Pulley Gp-Crankshaft
| 23***07 | Pulley | 1 |
| 30***96 | Pulley Group-Crankshaft | 1 |
| 8T***42 | Bolt; (M8x1.25x14-mm) | 4 |
287-4749 Pulley Gp-Crankshaft
| 28***49 | Pulley Group-Crankshaft | 1 |
| 30***97 | Pulley-Crankshaft; (2-Groove) | 1 |
287-6114 Pulley Gp-Water Pump
| 28***14 | Pulley Group-Water Pump | 1 |
| 35***69 | V-Belt; (Water Pump) | 1 |
287-6138 V-Belt Gp
| 09***05 | Cap | 1 |
| 19***24 | Ring-Snap | 2 |
| 22***45 | Rocker As | 8 |
235-5880 Valve Mechanism Gp
| 11***68 | Clip | 2 |
| 15***28 | Clamp | 1 |
| 19***22 | Bolt As; (M8x1.25x22-mm) | 2 |
Cooling System
314-9900 Cooler Gp-Engine Oil
| 09***13 | Seal-O-Ring | 4 |
| 09***21 | Plug | 2 |
| 23***98 | Stud | 1 |
235-5896 Cooler Gp-Engine Oil
| 09***13 | Seal-O-Ring | 4 |
| 09***21 | Plug | 2 |
| 19***35 | Bolt; (M8x1.25x22-mm) | 13 |
292-4040 Drain Gp-Coolant
| 09***75 | Bolt; (25-mm Long) | 2 |
| 23***09 | Washer-Special | 1 |
| 23***31 | Cover | 1 |
315-8355 Housing & Regulator Gp
| 09***75 | Bolt; (25-mm Long) | 2 |
| 23***31 | Cover | 1 |
| 23***59 | Gasket; (Water Temperature Regulator) | 1 |
258-3552 Lines Gp-Water -Radiator
| 14***32 | Pin As | 1 |
| 17***55 | Pin | 2 |
| 20***76 | Stud-Ball | 4 |
235-5900 Lines Gp-Water
| 16***15 | Cap-Vented; (Coolant Recovery Tank) | 1 |
| 1P***78 | Clamp; (Hose) | 2 |
| 22***78 | Clamp-Tbolt; (M5x0.8) | 4 |
258-3542 Mounting Gp-Rad & Oil Cooler
| 14***32 | Pin As | 1 |
| 17***55 | Pin | 2 |
| 20***76 | Stud-Ball | 4 |
287-6056 Pump Gp-Water
| 10***47 | Cover-Pump | 1 |
| 19***60 | Plug | 1 |
| 28***56 | Pump Group-Water | 1 |
335-9117 Pump Gp-Water
| 03***65 | Cap As-Radiator; (Sea Water Heat Exchanger) | 1 |
| 06***80 | Fitting | 1 |
| 12***52 | Spacer; (10.5x20x28-mm Thk) | 1 |
258-3459 Radiator & Hyd Oil Cooler Gp
| 11***26 | Filter Element As-Air; (Primary) | 1 |
| 11***31 | Filter Element As-Air; (Secondary) | 1 |
| 11***17 | Valve-Dust; (Air Cleaner) | 1 |
Electrical And Starting System
287-6361 Alternator Gp-Charging
| 23***62 | Plate | 1 |
| 23***73 | Bolt; (M10x1.5x90-mm) | 1 |
| 23***72 | Alternator Group-Charging | 1 |
315-8353 Alternator Gp-Charging
| 03***05 | Terminal-Cable; (00-Ga, 5/16-In Screw) | 1 |
| 11***16 | Block | 1 |
| 1P***10 | Tape (Order By The Meter) (Use As | 0 |
105-2814 Alternator Gp-Charging
| 10***14 | Alternator Group-Charging | 2 |
| 23***62 | Plate | 1 |
| 23***73 | Bolt; (M10x1.5x90-mm) | 1 |
258-4121 Battery & Wiring Gp
| 11***71 | Puller-Minifuse | 1 |
| 25***27 | Screw-Truss Head; (No 12x17.46-mm) | 2 |
| 25***21 | Battery & Wiring Group | 1 |
310-5289 Control Gp-Machine
| 10***59 | Glow Plug | 4 |
| 25***90 | Plate-Connection | 1 |
| 31***89 | Control Group-Machine | 1 |
258-4144 Cover Gp-Fuse Panel
| 22***41 | Element As-Jacket Water Heater; (120-Volt, 530-Watt) | 1 |
| 22***42 | Heater Group-Jacket Water | 1 |
| 23***03 | Gasket | 1 |
258-4103 Electronics Gp-Machine
| 13***17 | Cap As-Dust | 1 |
| 21***12 | Cord As | 1 |
| 22***35 | Element As-Jacket Water Heater; (240-Volt, 530-Watt) | 1 |
347-4186 Electronics Gp-Monitor -Monitor
| 15***28 | Spacer; (7x16x20-mm Thk) | 4 |
| 25***27 | Screw-Truss Head; (No 12x17.46-mm) | 9 |
| 25***48 | Plate As | 1 |
347-4187 Electronics Gp-Monitor
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***17 | Tape; (5.5m) | 0 |
235-5904 Glow Plug Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***17 | Tape; (5.5m) | 0 |
218-0943 Heater Gp-Jacket Water
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***39 | Relay As | 3 |
218-0942 Heater Gp-Jacket Water
| 15***71 | Kit-Connecting Plug; (4-Pin) | 0 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 2 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
258-4145 Kit-Control Mounting -Product Link
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 20***14 | Lens As; (Floodlight) | 1 |
| 23***30 | Body As; (Floodlight) | 1 |
258-4185 Kit-Security
| 10***53 | Case, Spacer; (Spherical) | 1 |
| 10***54 | Spacer; (Spherical) | 1 |
| 10***55 | Washer; (Spherical) | 1 |
328-2366 Kit-Wiring Harness -Accugrade
| 32***66 | Kit-Wiring Harness; -Accugrade | 1 |
| 9R***42 | Plug As | 1 |
| 9R***58 | Cord As | 1 |
258-4127 Kit-Work Tool Wiring
| 25***27 | Kit-Work Tool Wiring | 1 |
| 27***00 | Lens; (Amber)(Warning Beacon) | 1 |
| 9R***42 | Plug As | 1 |
234-4328 Lamp Gp-Flood
| 23***28 | Lamp Group-Flood; -Front, Rear, Wide Range | 3 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
195-0189 Lamp Gp-Head & Signal -Rh-High, Low Beam
| 08***48 | Lamp; (12-Volt, 5-Watt) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
195-0190 Lamp Gp-Head & Signal -Lh-High, Low Beam
| 08***48 | Lamp; (12-Volt, 5-Watt) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
309-1325 Lamp Gp-Warning Beacon -Amber
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 26***23 | Switch As-Rocker; (Warning Beacon) | 1 |
128-6985 Lamp Gp-Warning Beacon -Amber, Magnetic Mount, Rotating
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 16***95 | Lens | 1 |
258-4164 Lighting Gp-Flood -Work Lights, Front
| 24***97 | Cable-Coiled; (Sensor) | 1 |
| 25***29 | Receiver Group-Laser; (Lr410) | 1 |
| 25***29 | Case-Carrying | 1 |
333-4957 Lighting Gp-Roading -Rear
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 33***57 | Lighting Group-Roading; -Rear | 1 |
258-4130 Lighting Gp-Roading -Head, Signal, Stop, Tail
| 1H***44 | Lockwasher (Bracket To Cab) | 2 |
| 25***30 | Lighting Group-Roading; -Head, Signal, Stop, Tail | 1 |
| 26***80 | Fuse; (20-Ampere)(Main) | 1 |
258-4169 Lighting Gp-Stop & Tail
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 3 |
| 25***69 | Lighting Group-Stop & Tail | 1 |
258-4184 Lighting Gp-Warning Beacon -Amber, Magnetic Mount, Rotating
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 17***49 | Strap; (Marker) | 1 |
| 25***84 | Lighting Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
292-1271 Mast Gp -Accugrade Laser
| 23***74 | Switch-Temperature; (Engine Coolant, Cold Start) | 1 |
| 29***71 | Mast Group; -Accugrade Laser | 1 |
| 32***52 | Switch-Oil Press; (Engine) | 1 |
258-4135 Relay Gp -Main Power
| 25***35 | Relay Group; -Main Power | 1 |
| 30***87 | Control Group-Unprogrammed; (Transmission) | 1 |
| 35***39 | Software Group-Machine | 1 |
160-2443 Sensor Gp-Position
| 16***43 | Sensor Group-Position; -Brake Pedal | 1 |
| 34***36 | Control Group-Unprgmed Monitor; (Machine) | 1 |
| 35***58 | Software Group-Monitor | 1 |
266-1467 Sensor Gp-Position -Rotary
| 10***85 | Cap-Starting Motor | 1 |
| 10***12 | Kit-Contact; (Starting Motor) | 1 |
| 10***13 | Switch As; (Starting Motor)(12-Volt) | 1 |
262-3764 Sensor Gp-Speed -Motor
| 26***64 | Sensor Group-Speed; -Motor | 1 |
| 32***52 | Switch-Oil Press; (Engine) | 1 |
191-8303 Sensor Gp-Speed
| 14***39 | Starting Motor Group-Electric; -12-Volt | 1 |
| 19***03 | Sensor Group-Speed | 1 |
238-8277 Sensor Gp-Temp & Press -Engine
| 10***74 | Seal-Connector | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
143-0539 Starting Motor Gp-Electric
| 10***05 | Cap-Receptacle | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
287-6181 Starting Motor Gp-Electric
| 03***12 | Terminal-Ring; (2-Ga, 1/4-In Screw)(Circuit Breaker) | 1 |
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
300-1071 Switch Gp-Pressure
| 03***12 | Terminal-Ring; (2-Ga, 1/4-In Screw)(Circuit Breaker) | 1 |
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
258-4100 Wiring Gp-Cab
| 15***49 | Cable-Electrical; (03050 mm ) | 0 |
| 15***50 | Cable; (00-Ga, Black)(183-cm Each) | 0 |
| 17***20 | Strap-Dual Clamp | 5 |
258-4115 Wiring Gp-Engine
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
258-4192 Wiring Gp-Engine -Battery
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***39 | Relay As | 5 |
336-0913 Wiring Gp-Grade Control
| 14***23 | Housing-Axle | 1 |
| 14***29 | Spacer; (57.16x69.85x27.54-mm Thk) | 1 |
| 15***52 | Seal-Lip Type | 1 |
258-4146 Wiring Gp-Heater
| 14***29 | Spacer; (57.16x69.85x27.54-mm Thk) | 1 |
| 15***52 | Seal-Lip Type | 1 |
| 15***10 | Cone-Bearing | 1 |
258-4107 Wiring Gp-Machine
| 25***57 | Axle Group; -Standard | 4 |
| 25***07 | Wiring Group-Machine | 1 |
258-4190 Wiring Gp-Quick Coupler
| 25***57 | Axle Group; -Heavy-Duty | 4 |
| 25***90 | Wiring Group-Quick Coupler | 1 |
258-4125 Wiring Gp-Work Tool
| 10***66 | Bolt; (Self Locking) (M16x2x40mm) | 4 |
| 14***33 | Retainer | 2 |
| 14***36 | Nut; (9/16-18-Thd) | 32 |
Engine Arrangement
258-2517 Engine Ar
| 25***17 | Engine Ar | 1 |
| 26***88 | Engine Ar-Primary | 1 |
287-8073 Engine Ar-Primary
262-7288 Engine Ar-Primary
295-7113 Engine Ar-Primary
| 28***73 | Engine Ar-Primary | 1 |
| 29***13 | Engine Ar-Primary | 1 |
295-7118 Installation Ar-Engine
| 25***47 | Mounting Group-Engine | 1 |
| 25***52 | Drain Group-Engine Oil | 1 |
| 25***65 | Lines Group-Air | 1 |
258-2445 Installation Ar-Engine
| 25***45 | Installation Ar-Engine | 1 |
| 25***47 | Mounting Group-Engine | 1 |
| 25***52 | Drain Group-Engine Oil | 1 |
Frame And Body
258-3801 Conversion Ar-Roading -European Market
| 25***74 | Frame Group-Machine | 1 |
| 25***78 | Plate As | 1 |
| 25***84 | Cover | 2 |
258-3800 Conversion Ar-Roading -Nacd
| 14***32 | Pin As | 1 |
| 15***05 | Bolt-Shoulder | 2 |
| 22***40 | Latch As | 1 |
258-3841 Conversion Gp-Roading -Italy
| 22***15 | Plate As | 1 |
| 24***77 | Bolt; (M8x1.25x12-mm) | 1 |
| 25***41 | Conversion Group-Roading; -Italy | 1 |
258-3840 Conversion Gp-Roading -Germany
| 25***73 | Frame As | 1 |
| 25***40 | Conversion Group-Roading; -Germany | 1 |
| 28***98 | Arm As-Lift, Cylinder Head | 1 |
258-2591 Counterweight Gp
| 25***91 | Counterweight Group | 1 |
| 25***92 | Plate | 8 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 4 |
322-1644 Door As-Access -Vented
| 28***67 | Film-Instruction; (Service Chart, Read Omm)(Service Chart) | 1 |
| 28***68 | Film-Instruction; (Service Chart, Read Omm)(Service Chart) | 1 |
| 28***69 | Film-Instruction; (Service Chart, Read Omm)(Service Chart) | 1 |
258-2594 Enclosure Gp-Engine
| 12***18 | Seal; (1000-cm) | 0 |
| 13***27 | Seal; (69-cm) | 0 |
| 17***79 | Insulation | 1 |
258-2675 Frame & Mtg Gp-Machine
| 08***48 | Lamp; (12-Volt, 5-Watt) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
258-2674 Frame Gp-Machine
| 17***91 | Nut-Spring | 4 |
| 17***16 | Chock | 1 |
| 25***74 | Frame Group-Machine | 1 |
150-8621 Guide Gp-Lines
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
287-4160 Kit-Counterweight
| 17***91 | Nut-Spring | 4 |
| 17***16 | Chock | 1 |
| 17***47 | Pin | 1 |
287-4161 Kit-Counterweight
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
312-1024 Kit-Engine Enclosure -Vented
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
342-2683 Kit-Machine Enclosure Seal -Debris Barrier
| 15***80 | Washer-Hard; (22x38x6-mm Thk) | 8 |
| 25***89 | Mount | 4 |
| 25***92 | Bracket As-Lift | 1 |
311-8704 Kit-Machine Enclosure Seal -Debris Barrier
| 15***80 | Washer-Hard; (22x38x6-mm Thk) | 8 |
| 25***91 | Plate-Lift | 4 |
| 31***04 | Kit-Machine Enclosure Seal; -Debris Barrier | 1 |
315-7816 Kit-Roading Conversion -Italy
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
333-7434 Kit-Roading Conversion -Germany
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
| 17***20 | Strap-Dual Clamp | 5 |
333-7436 Kit-Roading Conversion -Front
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 1 |
| 24***59 | Cover-Insulation | 1 |
| 24***60 | Cover-Insulation | 1 |
258-3884 Kit-Roading Conversion -Lights, Mirrors
| 15***80 | Washer-Hard; (22x38x6-mm Thk) | 8 |
| 25***84 | Kit-Roading Conversion; -Lights, Mirrors | 1 |
| 25***89 | Mount | 4 |
315-7815 Kit-Roading Conversion -Germany
| 13***66 | Mirror Group-Rear View | 2 |
| 14***71 | Clamp; (Top)(Top) | 1 |
| 14***72 | Clamp; (Bottom)(Bottom) | 1 |
333-7435 Kit-Roading Conversion -Italy
| 17***79 | Insulation | 1 |
| 26***78 | Insulation | 1 |
| 26***79 | Insulation | 1 |
258-4390 Lifting Gp-Machine -Kit, Single Point
| 25***90 | Lifting Group-Machine; -Kit, Single Point | 1 |
258-4385 Lifting Gp-Machine -Four Point
| 17***79 | Insulation | 2 |
| 25***85 | Lifting Group-Machine; -Four Point | 1 |
| 29***55 | Insulation | 1 |
258-4410 Lifting Gp-Machine -Kit, Four Point
| 25***10 | Lifting Group-Machine; -Kit, Four Point | 1 |
258-3872 Mirror & Mtg Gp-Rear View -With Roading Light Mount
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
| 22***32 | Cap; (Gas Valve) | 1 |
| 22***52 | Valve-Gas; (Brake Accumulator) | 1 |
258-3848 Mounting Gp-Registration -Italian
| 1J***71 | Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter | 1 |
| 22***32 | Cap; (Gas Valve) | 1 |
| 22***52 | Valve-Gas; (Brake Accumulator) | 1 |
307-6237 Mounting Gp-Roading Lights -Kit, Germany, Italy
| 06***43 | Ring-Snap | 1 |
| 21***55 | Pin As | 1 |
| 21***43 | Bushing | 1 |
294-4560 Suppression Gp-Sound -Machine
| 26***41 | Kit-Seal | 1 |
| 29***60 | Suppression Group-Sound; -Machine | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
280-8330 Suppression Gp-Sound -Engine
| 16***13 | Kit-Seal | 1 |
| 28***30 | Suppression Group-Sound; -Engine | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
258-3496 Suppression Gp-Sound -Machine
| 23***66 | Pin As | 6 |
| 23***99 | Spacer; (25.4x28.4x13-mm Thk) | 12 |
| 24***70 | Spacer; (8.2x13x6-mm Thk) | 6 |
Fuel System
280-6340 Control Gp-Governor
| 13***87 | Clip | 1 |
| 19***36 | Insert-Threaded; (M6x1-Thd) | 3 |
| 23***96 | Screw-Flat Head; (M6x1x35-mm) | 4 |
295-7463 Control Gp-Governor
| 13***87 | Clip | 1 |
| 19***36 | Insert-Threaded; (M6x1-Thd) | 3 |
| 23***96 | Screw-Flat Head; (M6x1x35-mm) | 4 |
295-7465 Control Gp-Governor
| 06***80 | Fitting | 1 |
| 11***01 | Bowl As-Water Collection | 1 |
| 11***18 | Ring-Retaining | 1 |
295-7029 Lines Gp-Fuel
| 09***35 | Cap | 1 |
| 09***90 | Shim (1.800mm Thick) | 0 |
| 09***94 | Shim (0.700mm Thick) | 0 |
317-5057 Lines Gp-Fuel Injection
| 06***80 | Fitting | 1 |
| 11***01 | Bowl As-Water Collection | 1 |
| 11***18 | Ring-Retaining | 1 |
315-8350 Lines Gp-Fuel Injection
| 09***35 | Cap | 1 |
| 11***63 | Support | 4 |
| 11***64 | Hose | 4 |
235-5901 Lines Gp-Fuel Injection
| 09***35 | Cap | 1 |
| 11***63 | Support | 4 |
| 11***64 | Hose | 4 |
258-2444 Lines Gp-Fuel Prm & Filter
| 21***10 | Nut | 1 |
| 23***35 | Stud | 1 |
| 23***36 | Bracket | 1 |
249-7347 Pump Gp-Fuel Injection
| 14***17 | Bolt; (M10x1.25x25-mm) | 1 |
| 21***10 | Nut | 1 |
| 22***49 | Retainer | 1 |
315-8352 Pump Gp-Fuel Injection
| 14***17 | Bolt; (M10x1.25x25-mm) | 1 |
| 19***33 | Bolt | 2 |
| 21***10 | Nut | 1 |
317-5047 Pump Gp-Fuel Injection
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 25***40 | Tank Group-Fuel | 1 |
258-3442 Pump Gp-Fuel Prm & Prim Filter -Water Separator
| 00***64 | Seal-O-Ring | 1 |
| 14***28 | Elbow | 1 |
| 23***37 | Fitting | 1 |
258-2439 Tank & Mtg Gp-Fuel
| 11***58 | Pulley-Alternator | 1 |
| 11***59 | Frame As-Alternator | 1 |
| 11***60 | Rotor As-Alternator | 1 |
258-2440 Tank Gp-Fuel
| 10***14 | Alternator Group-Charging | 1 |
| 23***62 | Plate | 1 |
| 23***73 | Bolt; (M10x1.5x90-mm) | 1 |
Hydraulic System
149-0686 Accumulator Gp-Hydraulic -Charged
| 14***86 | Accumulator Group-Hydraulic; -Charged | 1 |
| 17***85 | Kit-Seal | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
227-8807 Accumulator Gp-Hydraulic -Uncharged
| 22***07 | Accumulator Group-Hydraulic; -Uncharged | 1 |
| 25***97 | Bearing-Sleeve | 1 |
| 28***91 | Kit-Seal | 1 |
310-8461 Accumulator Gp-Ride Control -Uncharged
| 31***61 | Accumulator Group-Ride Control; -Uncharged | 1 |
310-8460 Accumulator Gp-Ride Control -Charged
| 25***97 | Bearing-Sleeve | 1 |
| 25***42 | Bearing-Sleeve | 1 |
| 27***70 | Kit-Seal; (Hydraulic Cylinder) | 1 |
230-5406 Cylinder & Mtg Gp-Angle Blade
231-5274 Cylinder & Mtg Gp-Angle Blade
| 02***87 | Fitting-Grease; (Universal Joint) | 2 |
| 23***74 | Cylinder & Mtg Group-Angle Blade | 1 |
| 26***40 | Kit-Seal; (Swing Cylinder) | 1 |
293-6264 Cylinder Gp-Bucket
| 25***97 | Bearing-Sleeve | 1 |
| 27***70 | Kit-Seal; (Hydraulic Cylinder) | 1 |
| 29***64 | Cylinder Group-Bucket | 1 |
154-5018 Cylinder Gp-Bucket
| 02***87 | Fitting-Grease; (Universal Joint) | 2 |
| 15***18 | Cylinder Group-Bucket | 1 |
| 26***40 | Kit-Seal; (Swing Cylinder) | 1 |
255-0943 Cylinder Gp-Grapple
| 21***43 | Fitting As; (Quick Disconnect, Male) | 1 |
| 21***44 | Fitting As; (Quick Disconnect, Male) | 1 |
| 25***43 | Cylinder Group-Grapple | 1 |
164-9295 Cylinder Gp-Grapple
| 16***95 | Cylinder Group-Grapple | 1 |
| 21***24 | Kit-Seal; (Lift) | 2 |
| 25***12 | Cylinder Group-Lift | 2 |
278-1975 Cylinder Gp-Grapple -Industrial
| 21***45 | Fitting As; (Quick Disconnect, Female) | 1 |
| 21***46 | Fitting As; (Quick Disconnect, Female) | 1 |
| 27***75 | Cylinder Group-Grapple; -Industrial | 1 |
225-9521 Cylinder Gp-Hydraulic -Angle Blade
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
| 22***21 | Cylinder Group-Hydraulic; -Angle Blade | 1 |
| 22***74 | Spacer; (13x20x7-mm Thk) | 1 |
274-9930 Cylinder Gp-Hydraulic -Angle Blade
| 25***76 | Lines Group-Hydraulic | 1 |
| 27***30 | Cylinder Group-Hydraulic; -Angle Blade | 1 |
278-1969 Cylinder Gp-Hydraulic
| 25***11 | Lines Group-Lift Cylinder | 1 |
| 25***12 | Lines Group-Tilt Cylinder | 1 |
| 25***34 | Tank & Mtg Group-Hydraulic | 1 |
274-9931 Cylinder Gp-Hydraulic -Angle Blade
| 25***78 | Lines Group-Hydraulic; -Work Tool Positioner | 1 |
| 25***68 | Manifold & Mtg Group-Control; -Work Tool Positioner | 1 |
| 27***31 | Cylinder Group-Hydraulic; -Angle Blade | 1 |
192-2640 Cylinder Gp-Hydraulic -Coupler
| 19***40 | Cylinder Group-Hydraulic; -Coupler | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
| 30***52 | Tee | 1 |
293-5710 Cylinder Gp-Lift
| 25***21 | Lines Group-Work Tool; -High Flow | 1 |
| 25***03 | Valve & Mtg Group-Control; -High Flow | 1 |
| 25***57 | Pump & Mtg Group-Work Tool; -High Flow | 1 |
258-2512 Cylinder Gp-Lift
| 25***22 | Lines Group-Work Tool | 1 |
| 25***02 | Valve & Mtg Group-Control | 1 |
| 25***12 | Cylinder Group-Lift | 1 |
258-2558 Cylinder Gp-Lift Arm -Radial Lift
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
258-2514 Cylinder Gp-Tilt -Rh
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***73 | Clip | 2 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
293-5711 Cylinder Gp-Tilt -Rh
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
258-2515 Cylinder Gp-Tilt -Lh
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***39 | Relay As | 1 |
| 14***15 | Connector As | 1 |
293-5712 Cylinder Gp-Tilt -Lh
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
218-5841 Fitting Gp-Hydraulic -Quick Disconnect, Female, High Flow
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***95 | Fitting As; (Quick Disconnect, Male) | 1 |
292-2439 Fitting Gp-Hydraulic -1-Speed
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
285-2190 Fitting Gp-Hydraulic -Manual
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
218-5840 Fitting Gp-Hydraulic -Quick Disconnect, Male, High Flow
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
258-2428 Hydraulic Ar -Work Tool Positioner
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
258-3180 Hydraulic Ar
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***95 | Fitting As; (Quick Disconnect, Male) | 1 |
261-6264 Hydraulic Ar -High Flow
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 13***51 | Spacer; (11x19x6-mm Thk) | 1 |
| 14***25 | Connector As. | 4 |
258-2600 Hydraulic Ar
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***95 | Fitting As; (Quick Disconnect, Male) | 1 |
258-3730 Hydraulic Ar
| 14***19 | Connector As | 2 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
258-2426 Hydraulic Ar
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
258-3733 Hydraulic Ar
| 14***15 | Connector As | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 6 |
| 14***42 | Connector Group | 2 |
258-3182 Hydraulic Ar -High Flow
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
304-6743 Hydraulic Ar
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 13***51 | Spacer; (11x19x6-mm Thk) | 1 |
| 14***25 | Connector As. | 4 |
258-3910 Kit-Quick Coupler Conversion -Hydraulic
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***95 | Fitting As; (Quick Disconnect, Male) | 1 |
304-6754 Kit-Ride Control
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 16***89 | Hose As | 2 |
258-3915 Kit-Work Tool Positioner -Self-Leveling Hydraulics
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 16***89 | Hose As | 2 |
293-0140 Lines Gp-Bucket -Multipurpose
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
| 15***43 | Connector As. | 1 |
279-5413 Lines Gp-Bucket -Multipurpose
| 11***61 | Hose As | 1 |
| 14***15 | Connector As | 2 |
| 14***16 | Connector Group | 2 |
285-6113 Lines Gp-Bucket -Utility
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 14***11 | Plug Group | 1 |
| 17***25 | Elbow As | 1 |
154-5019 Lines Gp-Bucket
| 14***41 | Connector Group | 2 |
| 15***19 | Lines Group-Bucket; -Multipurpose | 1 |
| 25***80 | Tube As | 1 |
279-5414 Lines Gp-Bucket -Multipurpose
| 11***61 | Hose As | 1 |
| 14***15 | Connector As | 2 |
| 14***16 | Connector Group | 2 |
279-5412 Lines Gp-Bucket -Industrial
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
279-5415 Lines Gp-Bucket -Multipurpose
| 11***61 | Hose As | 1 |
| 14***15 | Connector As | 2 |
| 14***16 | Connector Group | 2 |
154-5052 Lines Gp-Bucket
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***39 | Relay As | 1 |
| 14***15 | Connector As | 1 |
279-5416 Lines Gp-Bucket -Multipurpose
| 11***61 | Hose As | 1 |
| 14***15 | Connector As | 2 |
| 14***16 | Connector Group | 2 |
231-5273 Lines Gp-Connecting
| 15***49 | Elbow As | 1 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 2 |
| 19***08 | Adapter | 1 |
177-1986 Lines Gp-Connecting
| 11***49 | Fitting As; (Quick Disconnect) | 1 |
| 14***62 | Elbow Group | 1 |
| 15***49 | Elbow As | 1 |
258-2424 Lines Gp-Coupler
| 11***49 | Fitting As; (Quick Disconnect) | 2 |
| 14***61 | Elbow Group | 1 |
| 14***62 | Elbow Group | 1 |
286-9279 Lines Gp-Grapple
286-9250 Lines Gp-Grapple
161-0187 Lines Gp-Grapple
| 11***49 | Fitting As; (Quick Disconnect) | 2 |
| 14***52 | Elbow As. | 1 |
| 14***61 | Elbow Group | 1 |
258-2876 Lines Gp-Hydraulic
304-6745 Lines Gp-Hydraulic -Ride Control, Work Tool Positioner
258-2878 Lines Gp-Hydraulic -Work Tool Positioner
258-2582 Lines Gp-Hydraulic Fan -Radiator
258-2786 Lines Gp-Hydraulic Fan
258-2780 Lines Gp-Hydraulic Oil Cooler
258-2411 Lines Gp-Lift Cylinder
258-3393 Lines Gp-Lowering Control -Manual
258-3237 Lines Gp-Pump
261-6239 Lines Gp-Pump
258-3238 Lines Gp-Pump -High Flow
258-2412 Lines Gp-Tilt Cylinder
258-2421 Lines Gp-Work Tool -High Flow
258-2422 Lines Gp-Work Tool
258-3462 Manf & Solenoid Mtg Gp-Accum -Pilot Shutoff
304-6755 Manf & Solenoid Mtg Gp-Accum
258-3394 Manifold & Lines Gp-Accum
258-3463 Manifold & Mtg Gp-Control -Motor, 2-Speed
258-3468 Manifold & Mtg Gp-Control -Work Tool Positioner
231-5278 Manifold & Mtg Gp-Control -Angling Blade
258-2801 Manifold & Solenoid Gp-Control -Work Tool Positioner
258-9011 Manifold Gp-Control -Angling Blade
291-0010 Manifold Gp-Control -Quick Coupler
274-8563 Manifold Gp-Control -Pilot Shutoff
274-8564 Manifold Gp-Control -Motor, 2-Speed
307-2275 Manifold Gp-Ride Control
307-2276 Manifold Gp-Ride Control -Accumulator
| 11***61 | Seal Kit; (Includes Seals, Thrust Ring, Stem And Connectors) | 1 |
| 20***71 | Valve Group-Manual; (Coupler Pin, Lift Arm Lwr Cont) | 1 |
| 20***73 | Valve Group-Manual; (Coupler Pin, Lift Arm Lwr Cont) | 1 |
258-2579 Motor & Mtg Gp-Hydraulic Fan
| 13***76 | Seal-O-Ring | 1 |
| 25***79 | Motor & Mtg Group-Hydraulic Fan | 1 |
156-0891 Mounting Gp-Cylinder -Industrial
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
| 21***73 | Nut; (1/2-28-Thd) | 1 |
165-8731 Mounting Gp-Cylinder -Utility
| 16***31 | Mounting Group-Cylinder; -Utility | 1 |
| 20***71 | Kit-Seal; (Solenoid Valve) | 1 |
| 21***61 | Flange | 1 |
154-5011 Mounting Gp-Cylinder
| 12***98 | Seat | 1 |
| 12***99 | Seat | 1 |
| 13***49 | Connector | 1 |
286-9248 Mounting Gp-Cylinder -Grapple Bucket
| 28***48 | Mounting Group-Cylinder; -Grapple Bucket | 1 |
| 4K***09 | Bearing-Sleeve | 4 |
| 6K***48 | Bearing-Sleeve | 4 |
258-3402 Pump & Mtg Gp-Gear
| 14***91 | Pin As | 2 |
| 14***94 | Pin | 1 |
| 1H***34 | Ring-Retaining; (External) | 4 |
258-2556 Pump & Mtg Gp-Work Tool
| 15***62 | Film-Information; (Tie-Down Location) | 2 |
| 18***33 | Step Group-Material Handling Arm | 1 |
| 21***50 | Arm As | 1 |
258-2557 Pump & Mtg Gp-Work Tool -High Flow
| 13***86 | Edge Group-Cutting | 1 |
| 17***81 | Blade Group-Angling | 1 |
| 17***83 | Spring Group-Blade | 1 |
258-2554 Pump Gp-Piston -High Flow
| 14***41 | Edge Group-Cutting | 1 |
| 17***82 | Blade Group-Angling | 1 |
| 17***83 | Spring Group-Blade | 1 |
258-3401 Pump Gp-Piston & Gear
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
258-2434 Tank & Mtg Gp-Hydraulic
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
258-2435 Tank Gp-Hydraulic
| 22***21 | Trunnion As | 1 |
| 22***79 | Plate As | 1 |
| 22***28 | Plate As | 1 |
258-2806 Tank Gp-Hydraulic
| 22***21 | Trunnion As | 1 |
| 22***79 | Plate As | 1 |
| 22***28 | Plate As | 1 |
258-2502 Valve & Mtg Gp-Control
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***40 | Pin | 2 |
| 16***19 | Pin As | 2 |
258-2503 Valve & Mtg Gp-Control -High Flow
| 16***89 | Tack-Fastener | 4 |
| 22***12 | Blade As-Angling | 1 |
| 22***46 | Edge Group-Bit & Cutting | 1 |
6e-4701 Valve Gp-Check -Pilot Oil
| 15***77 | Edge | 1 |
| 6E***01 | Valve Group-Check; -Pilot Oil | 1 |
336-1322 Valve Gp-Control -Implement
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***85 | Blade Group-Multipurpose Bucket | 1 |
336-1323 Valve Gp-Control
| 15***37 | Edge | 1 |
| 33***23 | Valve Group-Control | 1 |
258-2507 Valve Gp-Control -High Flow
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***80 | Blade Group-Multipurpose Bucket | 1 |
| 16***89 | Tack-Fastener | 4 |
258-2506 Valve Gp-Control
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 25***06 | Valve Group-Control | 1 |
112-1817 Valve Gp-Manual -Lowering Control
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 15***59 | Edge | 1 |
295-1799 Valve Gp-Relief -Main
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***87 | Blade Group-Multipurpose Bucket | 1 |
211-3014 Valve Gp-Shuttle -High Flow
| 15***77 | Edge | 1 |
| 21***14 | Valve Group-Shuttle; -High Flow | 1 |
195-9700 Valve Gp-Solenoid -12-Volt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 19***00 | Valve Group-Solenoid; -12-Volt-Work Tool | 1 |
185-4254 Valve Gp-Solenoid
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 18***54 | Valve Group-Solenoid; -Auxiliary | 1 |
Implements
287-4198 Arm As-Lift
| 19***16 | Edge | 1 |
| 28***98 | Arm As-Lift, Cylinder Head | 1 |
258-2699 Pin Gp-Lift Arm -With Support
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 25***99 | Pin Group-Lift Arm; -With Support | 1 |
Lubrication System
287-6016 Breather Gp
| 15***28 | Clamp | 2 |
| 23***37 | Clip-Hose | 1 |
| 23***38 | Clip | 3 |
235-5897 Filter Gp-Engine Oil
| 09***37 | Seal-O-Ring | 1 |
| 09***71 | Seal-O-Ring (Id=94.40mm) | 1 |
| 1R***34 | Filter-Engine Oil | 1 |
314-9901 Filter Gp-Engine Oil
| 09***37 | Seal-O-Ring | 1 |
| 09***71 | Seal-O-Ring (Id=94.40mm) | 1 |
| 1R***34 | Filter-Engine Oil | 1 |
317-5076 Filter Gp-Engine Oil
| 23***94 | Strainer As-Oil; (Engine) | 1 |
| 23***13 | Seal-O-Ring | 1 |
| 31***76 | Filter Group-Engine Oil | 1 |
287-5377 Lines Gp-Engine Oil
| 10***44 | Nut | 1 |
| 10***83 | Seal-O-Ring | 1 |
| 11***41 | Pump As-Oil | 1 |
235-5895 Pump Gp-Engine Oil
| 10***25 | Valve As; (Oil Bypass)(Engine) | 1 |
| 23***96 | Gasket | 1 |
| 23***96 | Gasket | 1 |
287-5665 Valve Gp-Engine Oil Relief
| 09***13 | Seal-O-Ring | 4 |
| 09***21 | Plug | 2 |
| 19***22 | Bolt As; (M8x1.25x22-mm) | 11 |
Machine Arrangement
295-7291 Chassis Ar
| 15***21 | Guide Group-Lines | 1 |
| 25***39 | Tank & Mtg Group-Fuel | 1 |
| 25***58 | Cylinder Group-Lift Arm; -Radial Lift | 1 |
258-2410 Chassis Ar
| 15***21 | Guide Group-Lines | 1 |
| 25***10 | Chassis Ar | 1 |
| 25***39 | Tank & Mtg Group-Fuel | 1 |
258-3236 Common Ar
| 25***10 | Chassis Ar | 1 |
| 25***45 | Installation Ar-Engine | 1 |
| 25***00 | Hydraulic Ar | 1 |
295-7246 Common Ar
| 25***00 | Hydraulic Ar | 1 |
| 25***90 | Film Group | 1 |
| 25***00 | Cab Ar-Enclosed Rops | 1 |
342-5011 Control Ar-Machine -Aux Proportional Flow
| 25***04 | Control Group-Electrohydraulic; -Lh, High Flow | 1 |
| 25***06 | Control Group-Electrohydraulic; -Rh | 1 |
| 25***25 | Wiring Group-Work Tool | 1 |
342-5010 Control Ar-Machine -Aux Proportional Flow
| 25***03 | Control Group-Electrohydraulic; -Lh | 1 |
| 25***06 | Control Group-Electrohydraulic; -Rh | 1 |
| 34***10 | Control Ar-Machine; -Auxiliary Proportional Flow | 1 |
342-5009 Control Ar-Machine -On, Off Auxiliary Control
| 25***03 | Control Group-Electrohydraulic; -Lh | 1 |
| 25***05 | Control Group-Electrohydraulic; -Rh | 1 |
| 34***09 | Control Ar-Machine; -On, Off Auxiliary Control | 1 |
258-3818 Conversion Ar-Machine -Germany
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 25***79 | Motor & Mtg Group-Hydraulic Fan | 1 |
258-3819 Conversion Ar-Machine -Italy
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 25***79 | Motor & Mtg Group-Hydraulic Fan | 1 |
315-6353 Conversion Ar-Machine
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 25***79 | Motor & Mtg Group-Hydraulic Fan | 1 |
258-3748 Machine Ar-Special
| 25***06 | Pump & Mtg Group-Hydrostatic | 1 |
| 25***26 | Hydraulic Ar | 1 |
| 25***00 | Power Train Ar | 1 |
304-6740 Machine Ar-Special
| 25***06 | Pump & Mtg Group-Hydrostatic | 1 |
| 25***00 | Power Train Ar; -2-Speed | 1 |
| 25***63 | Panel Group-Instrument; -Rh | 1 |
300-7629 Machine Ar-Special -Extreme Service Power Train
| 25***26 | Hydraulic Ar | 1 |
| 25***09 | Cover Group-Instrument Panel | 1 |
| 30***29 | Machine Ar-Special; -Extreme Service Power Train | 1 |
258-3750 Machine Ar-Special -Work Tool Positioner
| 25***06 | Pump & Mtg Group-Hydrostatic | 1 |
| 25***28 | Hydraulic Ar; -Work Tool Positioner | 1 |
| 25***00 | Power Train Ar | 1 |
258-3753 Machine Ar-Special -Ride Control, Work Tool Positioner, 2-Speed
| 25***06 | Pump & Mtg Group-Hydrostatic | 1 |
| 25***28 | Hydraulic Ar; -Work Tool Positioner | 1 |
| 25***00 | Power Train Ar; -2-Speed | 1 |
300-7634 Machine Ar-Special -Extreme Service Power Train
| 25***28 | Hydraulic Ar; -Work Tool Positioner | 1 |
| 25***63 | Panel Group-Instrument; -Rh | 1 |
| 30***34 | Machine Ar-Special; -Extreme Service Power Train, Expansion Plug, Plug, Plug, Expansion | 1 |
258-3682 Machine Ar-Special -Work Tool Positioner, 2-Speed
| 25***06 | Pump & Mtg Group-Hydrostatic | 1 |
| 25***28 | Hydraulic Ar; -Work Tool Positioner | 1 |
| 25***00 | Power Train Ar; -2-Speed | 1 |
Operator Station
258-4229 Accessory Gp-Cab
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 7 |
176-3900 Accumulator Gp-Refrigerant -Uncharged
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 2 |
| 17***00 | Accumulator Group-Refrigerant; -With Desiccant | 1 |
186-6190 Accumulator Gp-Refrigerant -Charged
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
258-4261 Air Conditioner & Mounting Gp
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
| 21***89 | Screw; (M4x25-mm) | 3 |
| 25***37 | Boot | 1 |
258-4260 Air Conditioner Ar
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
258-4290 Air Conditioner Gp
| 25***27 | Screw-Truss Head; (No 12x17.46-mm) | 2 |
| 25***28 | Plate | 1 |
| 25***94 | Insulation | 1 |
258-4311 Armrest & Mounting Gp
| 10***56 | Plug; (Switch) | 6 |
| 25***33 | Cover; (Cluster) | 1 |
| 25***11 | Armrest & Mounting Group | 1 |
269-0257 Base As-Joystick -Rh
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 2 |
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
269-0258 Base As-Joystick -Lh
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 2 |
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
258-3680 Cab Ar-Enclosed Rops
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 2 |
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
258-4000 Cab Ar-Enclosed Rops
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
258-3742 Cab Ar-Enclosed Rops
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
298-7198 Cable Gp-Control -Manual Lowering
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
276-0074 Cable Gp-Control
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
258-2468 Compressor & Mtg Gp-Refrig
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
266-2425 Condenser & Mtg Gp-Refrigerant
| 14***71 | Louver As | 6 |
| 16***55 | Bolt; (M6x1x35-mm) | 2 |
| 20***85 | Bolt; (M8x1.25x35-mm) | 1 |
258-4280 Condenser & Mtg Gp-Refrigerant
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
266-2430 Control & Wiring Gp-Air & Temp
| 15***80 | Washer-Hard; (22x38x6-mm Thk) | 8 |
| 25***89 | Mount | 4 |
| 25***98 | Film-Certification; (Ops, Read Omm) | 1 |
258-4299 Control Gp-Air & Temperature
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***56 | Plug; (Switch) | 1 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
258-3405 Control Gp-Electrohydraulic -Rh
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
258-3404 Control Gp-Electrohydraulic -Lh, High Flow
| 10***74 | Seal-Connector | 3 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
258-3406 Control Gp-Electrohydraulic -Rh
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 16***72 | Speaker As-Radio | 2 |
| 17***37 | Connector; (Radio) | 1 |
258-3407 Control Gp-Electrohydraulic -Rh, High Flow
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 16***72 | Speaker As-Radio | 2 |
| 17***37 | Connector; (Radio) | 1 |
258-3403 Control Gp-Electrohydraulic -Lh
| 25***03 | Control Group-Electrohydraulic; -Lh | 1 |
| 25***46 | Wiring Group-Heater | 1 |
| 25***51 | Heater & Mtg Group-Cab | 1 |
272-1790 Control Gp-Handle -Lh
| 00***10 | Elbow | 1 |
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 2 |
| 10***74 | Seal-Connector | 2 |
269-0266 Control Gp-Joystick -Lh
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***15 | Connector | 1 |
269-0262 Control Gp-Joystick -Rh
| 12***70 | Screw-Machine; (M6x1x40-mm) | 3 |
| 17***91 | Nut-Spring | 3 |
| 25***79 | Knob As | 1 |
269-0265 Control Gp-Joystick -Lh, High Flow
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***15 | Connector | 1 |
269-0263 Control Gp-Joystick -Rh, High Flow
| 10***96 | Clip | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***11 | Support | 1 |
269-0264 Control Gp-Joystick -Rh
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***15 | Connector | 1 |
258-4245 Cover Gp-Cab
| 00***10 | Elbow | 1 |
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 2 |
| 10***74 | Seal-Connector | 2 |
258-4314 Cover Gp-Console -Rh, Lh
| 25***85 | Window Group-Cab; -Side, Lh | 1 |
| 25***86 | Window Group-Cab; -Side, Rh | 1 |
| 25***14 | Cover Group-Console; -Rh, Lh | 1 |
258-4009 Cover Gp-Instrument Panel
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 25***09 | Cover Group-Instrument Panel | 1 |
| 26***33 | Switch As-Rocker; (Control Pattern Change) | 1 |
258-4440 Door & Mtg Gp-Cab -With Cab Tilt Gas Spring
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 13***42 | Screw-Self-Tapping; (M5x2.3x18.8-mm) | 4 |
| 25***40 | Door & Mtg Group-Cab; -With Cab Tilt Gas Spring | 1 |
258-4070 Door & Mtg Gp-Cab -With Cab Tilt Gas Spring
| 25***70 | Door & Mtg Group-Cab; -With Cab Tilt Gas Spring | 1 |
| 28***81 | Spacer,10.4mm Id X 22mm Od X 35mm L; Spacing Bar, Spacer,10.4mm Id X 22mm Od X 35mm L, Film-Instruction; (Control Pattern, Rh) | 1 |
| 28***82 | Film-Instruction; (Control Pattern, Lh) | 1 |
258-4080 Door & Mtg Gp-Cab -With Cab Tilt Gas Spring
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 13***42 | Screw-Self-Tapping; (M5x2.3x18.8-mm) | 4 |
| 25***80 | Door & Mtg Group-Cab; -With Cab Tilt Gas Spring | 1 |
258-4087 Door Gp-Cab -Polycarbonate
| 11***27 | Screw-Machine; (M6x1x30-mm) | 2 |
| 13***27 | Seal; (69-cm) | 0 |
| 17***22 | Seal; (230-cm Each) | 0 |
258-4442 Door Gp-Cab
| 10***96 | Clip | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***11 | Support | 1 |
258-4086 Door Gp-Cab -Glass
| 12***78 | Locknut; (M6x1-Thd) | 1 |
| 25***86 | Door Group-Cab; -Glass | 1 |
| 28***41 | Nut; (M10x1.5-mm Thd) | 1 |
258-4252 Duct & Filter Gp-Cab Air
| 00***10 | Elbow | 1 |
| 13***53 | Hose; (192.5cm) (X2) | 0 |
| 17***20 | Strap-Dual Clamp | 3 |
258-4400 Guard Gp-Rops/Fops -Kit
| 25***00 | Guard Group-Rops/Fops; -Kit | 1 |
| 5P***58 | Sleeve; (Cable Splice) | 1 |
| 5P***00 | Key Total 2 Pieces Per Unit; (Literature Compartment) | 2 |
298-7197 Handle Gp
| 28***70 | Mirror As; (Rear View) | 1 |
| 29***97 | Handle Group | 1 |
| 3B***05 | Washer,Lock Tube Assembly Mounting; Used On Engine P/N 5r698 | 1 |
258-4251 Heater & Mtg Gp-Cab
| 21***84 | Mirror As | 1 |
| 25***51 | Heater & Mtg Group-Cab | 1 |
| 3B***05 | Washer,Lock Tube Assembly Mounting; Used On Engine P/N 5r698 | 1 |
258-4250 Heater Ar-Cab
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
| 25***50 | Heater Ar-Cab | 1 |
258-4270 Heater Gp-Cab
| 13***40 | Locknut; (M8x1.25-Thd) | 2 |
| 21***52 | Screw-Truss Head; (M8x1.25x30-mm) | 2 |
| 25***70 | Heater Group-Cab | 1 |
337-3991 Installation Gp-Radio -Kit
| 25***17 | Spring Group-Gas; -Includes Lift Handle | 1 |
| 25***45 | Cover Group-Cab | 1 |
| 25***10 | Seat Ar; -Static | 1 |
258-4066 Installation Gp-Radio
| 09***65 | Spacer; (17x40x3-mm Thk) | 2 |
| 16***95 | Washer; (16.5x71.5x3-mm Thk) | 4 |
| 19***37 | Insert-Threaded; (M8x1.25-Thd) | 1 |
350-9039 Kit-Air Cond & Heater Instl
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 13***42 | Screw-Self-Tapping; (M5x2.3x18.8-mm) | 4 |
| 26***20 | Switch As-Rocker; (Creeper Control) | 1 |
350-9038 Kit-Air Cond & Heater Instl
| 08***77 | Lamp Group-Dome; (12-Volt) | 1 |
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 74 |
| 09***34 | Terminal-Blade; (18-Ga To 22-Ga) | 4 |
258-2474 Kit-Air Cond & Heater Instl
| 25***74 | Kit-Air Cond & Heater Instl | 1 |
| 25***17 | Spring Group-Gas; -Includes Lift Handle | 1 |
| 25***66 | Installation Group-Radio | 1 |
305-8044 Kit-Air Conditioner Breather
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 4 |
| 12***78 | Locknut; (M6x1-Thd) | 1 |
| 16***43 | Sensor Group-Position; -Brake Pedal | 1 |
258-2475 Kit-Air Conditioner Instl -Conversion
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 4 |
| 12***78 | Locknut; (M6x1-Thd) | 1 |
| 16***54 | Kit-Service; (Pedal) | 1 |
258-4443 Kit-Cab Door & Mounting
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 4 |
| 12***78 | Locknut; (M6x1-Thd) | 1 |
| 16***54 | Kit-Service; (Pedal) | 1 |
280-6084 Kit-Cab Door & Mounting -Polycarbonate
| 25***73 | Cable As; (Hand Control) | 1 |
| 28***84 | Kit-Cab Door & Mounting; -Polycarbonate | 1 |
| 2R***64 | Ring-Retaining | 1 |
258-2473 Kit-Cab Door & Mounting -Glass
| 25***73 | Kit-Cab Door & Mounting; -Glass | 1 |
| 25***43 | Pedal Group-Governor | 1 |
| 25***73 | Cable As; (Hand Control) | 1 |
280-6077 Kit-Cab Heater & Mounting
| 19***54 | Sleeve | 1 |
| 28***77 | Kit-Cab Heater & Mounting | 1 |
258-2472 Kit-Cab Window -Side
| 13***90 | Bushing; (Radio Mount) | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 17***37 | Connector; (Radio) | 1 |
292-7927 Kit-Control Pattern Change -Dedicated
| 13***66 | Lead-Antenna | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 17***17 | Support-Radio | 1 |
258-4110 Kit-Control Pattern Change -Selectable
| 19***54 | Sleeve | 1 |
| 25***10 | Kit-Control Pattern Change; -Selectable | 1 |
258-4111 Kit-Instrument Panel -Includes Creeper Control, Rh
| 19***54 | Sleeve | 1 |
| 25***11 | Kit-Instrument Panel; -Includes Creeper Control, Rh | 1 |
258-4045 Lever Gp-Governor
| 19***54 | Sleeve | 1 |
| 25***45 | Lever Group-Governor | 1 |
327-8941 Lever Gp-Governor
| 13***90 | Bushing; (Radio Mount) | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 17***37 | Connector; (Radio) | 1 |
258-4433 Liner Gp-Cab
| 19***54 | Sleeve | 1 |
| 25***33 | Liner Group-Cab | 1 |
258-4020 Liner Gp-Cab
| 13***90 | Bushing; (Radio Mount) | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 17***37 | Connector; (Radio) | 1 |
258-4265 Lines Gp-Air Conditioner
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 16***72 | Speaker As-Radio | 2 |
| 17***37 | Connector; (Radio) | 1 |
258-4255 Lines Gp-Heater
| 25***55 | Seat Group-Suspension; -Air | 1 |
| 25***55 | Lines Group-Heater | 1 |
| 25***11 | Armrest & Mounting Group | 1 |
6v-1970 Literature Gp
| 25***54 | Seat Group-Suspension; -Mechanical | 1 |
| 25***11 | Armrest & Mounting Group | 1 |
| 6V***70 | Literature Group; (Literature Compartment) | 1 |
258-4230 Mirror Gp-Rear View
| 25***49 | Support As-Seat | 1 |
| 25***53 | Seat Group; -Static | 1 |
| 25***30 | Mirror Group-Rear View | 1 |
305-8034 Mirror Gp-Rear View
| 15***83 | Washer-Hard; (8.4x35x2.5-mm Thk) | 4 |
| 25***03 | Seat & Armrest Group; -Static | 1 |
| 30***34 | Mirror Group-Rear View | 1 |
330-5011 Motor Gp-Window Wiper
| 15***83 | Washer-Hard; (8.4x35x2.5-mm Thk) | 4 |
| 25***02 | Seat & Armrest Group; -Suspension | 1 |
| 33***11 | Motor Group-Window Wiper | 1 |
295-3172 Mounting Gp-Armrest -Rh
| 25***50 | Seat & Mounting Group; -Static | 1 |
| 25***14 | Cover Group-Console; -Rh, Lh | 1 |
| 29***72 | Mounting Group-Armrest; -Rh | 1 |
295-3171 Mounting Gp-Armrest -Lh
| 15***83 | Washer-Hard; (8.4x35x2.5-mm Thk) | 4 |
| 25***01 | Seat & Armrest Group | 1 |
| 29***71 | Mounting Group-Armrest; -Lh | 1 |
258-4220 Mounting Gp-Rops -Includes Step
| 25***51 | Seat & Mounting Group; -Suspension | 1 |
| 25***20 | Mounting Group-Rops; -Includes Step | 1 |
| 25***14 | Cover Group-Console; -Rh, Lh | 1 |
258-3738 Option Ar-Cab
| 25***38 | Option Ar-Cab | 1 |
| 25***52 | Seat & Mounting Group | 1 |
| 25***14 | Cover Group-Console; -Rh, Lh | 1 |
258-3740 Option Ar-Cab
| 25***40 | Option Ar-Cab | 1 |
| 2D***12 | Washer; (7/16x15/16x1/4-In Thk) | 2 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 2 |
258-4162 Panel Gp-Instrument
| 25***62 | Panel Group-Instrument | 1 |
| 2D***12 | Washer; (7/16x15/16x1/4-In Thk) | 2 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 2 |
258-4163 Panel Gp-Instrument -Rh
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 21***58 | Conduit-Flexible; (227-cm) | 0 |
| 22***57 | Bolt; (5/16-18-Thd) | 2 |
280-6342 Pedal Gp-Governor
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 4 |
| 1P***10 | Washer; (0.391x0.812x0.067-In Thk) | 4 |
| 27***13 | Seat Group; -Cloth, Suspension | 1 |
325-8383 Pedal Gp-Governor
| 09***25 | Pin-Clevis | 1 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 2 |
| 15***82 | Spring-Gas; (Non-Locking) | 1 |
258-4043 Pedal Gp-Governor
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 4 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
327-8937 Pedal Gp-Governor
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***11 | Screw-Machine; (3/8-16x0.75-In) | 1 |
284-8953 Radio Gp -Am/Fm/Wb/Cd Player
| 25***82 | Frame As; (Rh) | 1 |
| 25***65 | Latch As | 1 |
| 25***76 | Catch As; (Inner) | 1 |
200-5729 Radio Gp -Am/Fm/Wb
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 2 |
| 09***78 | Pin-Spring | 1 |
| 14***08 | Fastener | 13 |
284-8954 Radio Gp -Am/Fm/Wb/Xm/ Cd Player
| 10***57 | Strip; (Locking) (275cm) | 0 |
| 10***56 | Seal; (275cm) | 0 |
| 25***11 | Glass-Rear | 1 |
288-1744 Radio Gp -Am/Fm/Wb/Cd Player
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 1 |
| 27***42 | Screw-Truss Head; (M6x1x20-mm) | 1 |
| 28***05 | Bracket As | 1 |
262-9163 Radio Gp -Am/Fm Cassette
| 25***83 | Window As; (Lh Front Sliding Glass) | 1 |
| 25***84 | Window As; (Lh Rear Sliding Glass) | 1 |
| 25***65 | Latch As | 1 |
284-8955 Radio Gp -Am/Fm/Wb/Sirius/ Cd Player
| 25***85 | Window Group-Cab; -Side, Lh | 1 |
| 25***86 | Window Group-Cab; -Side, Rh | 1 |
| 27***42 | Screw-Truss Head; (M6x1x20-mm) | 18 |
331-5292 Radio Gp -Am, Fm
| 25***31 | Film-Identification; (High Flow Xps) | 2 |
| 33***92 | Radio Group; -Am/Fm/Wb | 1 |
337-3992 Radio Gp -Am/Fm
| 29***10 | Film-Identification; (Two Speed) | 2 |
| 33***92 | Radio Group; -Am/Fm | 1 |
233-3123 Radio Gp -Am/Fm/Wb
| 17***91 | Nut-Spring | 4 |
| 23***23 | Radio Group; -Am/Fm/Wb | 1 |
| 25***33 | Visor Group-Cab; -Lh | 1 |
241-4936 Radio Gp -Am/Fm/Wb/Cd Player
| 1D***77 | Bolt-Round Head; (3/8-16x1-In) | 2 |
| 24***36 | Radio Group; -Am/Fm/Wb/Cd Player | 1 |
| 5T***69 | Clamp | 2 |
331-5291 Radio Gp -Am/Fm/Wb/Cd Player
| 25***08 | Film-Identification; (246c, Lh) | 1 |
| 25***09 | Film-Identification; (246c, Rh) | 1 |
| 25***23 | Film-Identification; (Caterpillar) | 1 |
258-4401 Seat & Armrest Gp
| 12***59 | Clamp-Hose | 2 |
| 12***71 | Clamp-Hose | 1 |
| 18***07 | Clamp-Hose | 1 |
258-4402 Seat & Armrest Gp -Suspension
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 15***35 | Film-Warning; (Crush Hazard, Stay Back) | 1 |
| 22***42 | Film-Warning; (Crush Hazard, Stay Back, U.S.) | 2 |
258-4403 Seat & Armrest Gp -Static
| 15***53 | Film-Information; (Read Omm) | 1 |
| 16***76 | Film; (Identification) (12v) (On Rear Console Behind Operators Seat) | 1 |
| 21***02 | Film-Warning; (No Weld, No Drill, Read Omm) | 1 |
258-4050 Seat & Mounting Gp -Static
| 15***53 | Film-Information; (Read Omm) | 1 |
| 16***76 | Film; (Identification) (12v) (On Rear Console Behind Operators Seat) | 1 |
| 21***02 | Film-Warning; (No Weld, No Drill, Read Omm) | 1 |
258-4052 Seat & Mounting Gp
| 15***53 | Film-Information; (Read Omm) | 1 |
| 16***76 | Film; (Identification) (12v) (On Rear Console Behind Operators Seat) | 1 |
| 21***02 | Film-Warning; (No Weld, No Drill, Read Omm) | 1 |
258-4051 Seat & Mounting Gp -Suspension
| 15***53 | Film-Information; (Read Omm) | 1 |
| 16***76 | Film; (Identification) (12v) (On Rear Console Behind Operators Seat) | 1 |
| 21***02 | Film-Warning; (No Weld, No Drill, Read Omm) | 1 |
258-4310 Seat Ar -Static
| 16***89 | Tack-Fastener | 4 |
| 22***69 | Film-Warning; (Do Not Operate, Read Omm) | 1 |
| 24***18 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
258-4320 Seat Ar-Suspension -Mechanical
| 19***10 | Film-Identification; (Synthetic Hydraulic Oil, Read Omm) | 2 |
| 25***20 | Seat Ar-Suspension; -Mechanical | 1 |
258-4330 Seat Ar-Suspension -Air
| 25***30 | Seat Ar-Suspension; -Air | 1 |
258-4096 Seat Belt Gp -Retractable
| 25***96 | Seat Belt Group; -Retractable | 1 |
258-4095 Seat Belt Gp -Retractable
| 25***95 | Seat Belt Group; -Retractable | 1 |
273-5913 Seat Gp -Cloth, Suspension
| 27***13 | Seat Group; -Cloth, Suspension | 1 |
258-4053 Seat Gp -Static
| 25***53 | Seat Group; -Static | 1 |
305-7096 Seat Gp -Vinyl
| 30***96 | Seat Group; -Vinyl | 1 |
258-4055 Seat Gp-Suspension -Air
| 25***55 | Seat Group-Suspension; -Air | 1 |
258-4054 Seat Gp-Suspension -Mechanical
| 25***54 | Seat Group-Suspension; -Mechanical | 1 |
258-4017 Spring Gp-Gas -Includes Lift Handle
| 25***17 | Spring Group-Gas; -Includes Lift Handle | 1 |
273-5914 Suspension Gp-Seat -Air
| 27***14 | Suspension Group-Seat; -Air | 1 |
273-9611 Suspension Gp-Seat -Mechanical
| 27***11 | Suspension Group-Seat; -Mechanical | 1 |
258-4233 Visor Gp-Cab -Lh
| 25***33 | Visor Group-Cab; -Lh | 1 |
258-3497 Visor Gp-Cab
| 25***97 | Visor Group-Cab | 1 |
258-4090 Window Gp-Cab -Side
| 25***90 | Window Group-Cab; -Side | 1 |
258-4010 Window Gp-Cab
| 25***10 | Window Group-Cab | 1 |
258-3286 Window Gp-Cab -Side, Rh
| 25***86 | Window Group-Cab; -Side, Rh | 1 |
258-3285 Window Gp-Cab -Side, Lh
| 25***85 | Window Group-Cab; -Side, Lh | 1 |
Power Train
258-3736 Axle Gp -Standard
| 14***82 | Elbow As | 2 |
| 17***20 | Strap-Dual Clamp | 1 |
| 19***40 | Connector As | 1 |
258-2957 Axle Gp -Heavy-Duty
| 10***66 | Bolt; (Self Locking) (M16x2x40mm) | 4 |
| 14***36 | Nut; (9/16-18-Thd) | 32 |
| 15***57 | Washer; (15.5x32x8-mm Thk) | 32 |
258-3737 Axle Gp -Heavy-Duty
| 13***04 | Switch As-Pressure; (Power Train Oil Filter Bypass) | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
| 25***37 | Axle Group; -Heavy-Duty | 1 |
258-2857 Axle Gp -Standard
| 10***66 | Bolt; (Self Locking) (M16x2x40mm) | 4 |
| 14***33 | Retainer | 2 |
| 14***36 | Nut; (9/16-18-Thd) | 32 |
258-2862 Drive Gp-Tandem
| 10***21 | Connector | 1 |
| 14***27 | Connector Group | 3 |
| 14***39 | Connector As. | 3 |
300-7627 Drive Gp-Tandem
| 14***27 | Connector Group | 2 |
| 14***39 | Connector As. | 4 |
| 14***45 | Connector As | 2 |
258-2860 Drive Gp-Tandem
| 10***21 | Connector | 1 |
| 14***39 | Connector As. | 3 |
| 14***58 | Elbow As | 1 |
258-2581 Filter & Lines Gp-Hydraulic
| 09***32 | Spacer; (13.5x22x14-mm Thk) | 2 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 2 |
| 17***87 | Connector As | 1 |
223-9974 Filter Gp-Oil -Hydraulic
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***18 | Connector As | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
258-2431 Lines Gp-Hydrostatic
| 10***93 | Poppet | 1 |
| 14***27 | Connector Group | 2 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 1 |
258-2430 Lines Gp-Hydrostatic
| 10***93 | Poppet | 1 |
| 14***27 | Connector Group | 2 |
| 14***62 | Elbow Group | 1 |
258-2607 Lines Gp-Parking Brake
| 17***05 | Bolt-Socket Head; (M8x1.25x12-mm) | 2 |
| 25***05 | Motor Group-Piston | 2 |
| 25***07 | Lines Group-Parking Brake | 1 |
258-3151 Manifold & Lines Gp-Control -Motor, 2-Speed
| 25***51 | Manifold & Lines Group-Control; -Motor, 2-Speed | 1 |
| 28***38 | Kit-Bearing; (Piston Motor) | 1 |
| 28***39 | Stud | 6 |
258-2589 Manifold Gp-Return
| 25***89 | Manifold Group-Return | 1 |
| 28***38 | Kit-Bearing; (Piston Motor) | 1 |
| 28***39 | Stud | 6 |
258-2409 Motor & Mtg Gp-Hydrostatic
| 25***08 | Motor & Mtg Group-Hydrostatic | 1 |
| 25***09 | Motor & Mtg Group-Hydrostatic | 1 |
| 25***30 | Lines Group-Hydrostatic | 1 |
258-2416 Motor & Mtg Gp-Hydrostatic
| 25***09 | Motor & Mtg Group-Hydrostatic | 1 |
| 25***16 | Motor & Mtg Group-Hydrostatic | 1 |
| 25***31 | Lines Group-Hydrostatic | 1 |
258-2408 Motor & Mtg Gp-Hydrostatic
| 22***35 | Flange | 1 |
| 25***08 | Motor & Mtg Group-Hydrostatic | 1 |
| 25***19 | Plate-Adapter | 1 |
258-2521 Motor Gp-Piston -2-Speed, Rh
| 09***94 | Ring-Retaining | 1 |
| 16***42 | Washer-Hard; (14.8x27x3-mm Thk) | 2 |
| 16***39 | Bolt; (M14x2x40-mm) | 2 |
258-2520 Motor Gp-Piston -2-Speed, Lh
| 09***94 | Ring-Retaining | 1 |
| 16***42 | Washer-Hard; (14.8x27x3-mm Thk) | 2 |
| 16***39 | Bolt; (M14x2x40-mm) | 2 |
258-2605 Motor Gp-Piston
| 25***05 | Motor Group-Piston | 1 |
| 27***35 | Kit-Cylinder Block | 2 |
| 27***36 | Kit-Seal; (Piston Pump) | 1 |
258-2442 Motor Gp-Piston
| 25***16 | Motor & Mtg Group-Hydrostatic | 1 |
| 25***30 | Lines Group-Hydrostatic | 1 |
| 25***42 | Motor Group-Piston | 1 |
258-3318 Mounting Gp-Pump
| 25***18 | Mounting Group-Pump | 1 |
| 27***36 | Kit-Seal; (Piston Pump) | 1 |
| 27***37 | Valve Group-Pump Control | 2 |
300-7637 Power Train Ar -Extreme Service Power Train
| 14***26 | Tire; (12-R16.5) | 1 |
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
258-3200 Power Train Ar
| 14***26 | Tire; (12-R16.5) | 1 |
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
258-3400 Power Train Ar -2-Speed
| 14***26 | Tire; (12-R16.5) | 1 |
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
258-2406 Pump & Mtg Gp-Hydrostatic
| 14***26 | Tire; (12-R16.5) | 1 |
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
300-7640 Pump & Mtg Gp-Hydrostatic
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 15***82 | Tire; (12-R16.5) | 1 |
258-2404 Pump Gp-Piston -Hydrostatic
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 15***82 | Tire; (12-R16.5) | 1 |
289-6362 Pump Gp-Piston -Hydrostatic
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 15***82 | Tire; (12-R16.5) | 1 |
199-5438 Tire & Rim Gp -Lh
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 19***38 | Tire & Rim Group; -Lh | 1 |
185-9931 Tire & Rim Gp -Rh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***31 | Tire & Rim Group; -Rh | 1 |
228-9221 Tire & Rim Gp
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 15***78 | Tire & Rim Group; -Lh | 2 |
| 15***79 | Tire & Rim Group; -Rh | 2 |
165-4902 Tire & Rim Gp -Heavy-Duty, Rh
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 16***02 | Tire & Rim Group; -Heavy-Duty, Rh | 1 |
228-9220 Tire & Rim Gp
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 14***38 | Tire & Rim Group; -Lh | 2 |
| 14***25 | Tire & Rim Group; -Rh | 2 |
265-2898 Tire & Rim Gp -Lh
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 15***80 | Tire & Rim Group; -Lh | 2 |
| 15***81 | Tire & Rim Group; -Rh | 2 |
265-2901 Tire & Rim Gp -Rh
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 16***06 | Tire & Rim Group; -Heavy-Duty, Lh | 2 |
| 16***07 | Tire & Rim Group; -Heavy-Duty, Rh | 2 |
185-9928 Tire & Rim Gp -Lh
| 15***99 | Valve As-Tire | 1 |
| 17***70 | Wheel As | 1 |
| 18***28 | Tire & Rim Group; -Lh | 1 |
165-4901 Tire & Rim Gp -Heavy-Duty, Lh
| 15***99 | Valve As-Tire | 1 |
| 16***01 | Tire & Rim Group; -Heavy-Duty, Lh | 1 |
| 18***35 | Tire; (305-546) | 1 |
185-9930 Tire & Rim Gp -Lh
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***30 | Tire & Rim Group; -Lh | 1 |
142-8738 Tire & Rim Gp -Lh
| 14***31 | Wheel As | 1 |
| 14***38 | Tire & Rim Group; -Lh | 1 |
| 15***99 | Valve As-Tire | 1 |
142-8728 Tire & Rim Gp -Lh
| 14***28 | Tire & Rim Group; -Lh | 1 |
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
188-0124 Tire & Rim Gp -Lh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***24 | Tire & Rim Group; -Lh | 1 |
154-3978 Tire & Rim Gp -Lh
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 15***78 | Tire & Rim Group; -Lh | 1 |
154-3980 Tire & Rim Gp -Lh
| 15***99 | Valve As-Tire | 1 |
| 15***80 | Tire & Rim Group; -Lh | 1 |
| 18***35 | Tire; (305-546) | 1 |
185-8674 Tire & Rim Gp -Lh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***74 | Tire & Rim Group; -Lh | 1 |
265-2900 Tire & Rim Gp -Lh
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 16***01 | Tire & Rim Group; -Heavy-Duty, Lh | 2 |
| 16***02 | Tire & Rim Group; -Heavy-Duty, Rh | 2 |
188-0125 Tire & Rim Gp -Rh
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***25 | Tire & Rim Group; -Rh | 1 |
154-3981 Tire & Rim Gp -Rh
| 15***99 | Valve As-Tire | 1 |
| 15***81 | Tire & Rim Group; -Rh | 1 |
| 18***35 | Tire; (305-546) | 1 |
165-4906 Tire & Rim Gp -Heavy-Duty, Lh
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 16***06 | Tire & Rim Group; -Heavy-Duty, Lh | 1 |
165-4907 Tire & Rim Gp -Heavy-Duty, Rh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 16***07 | Tire & Rim Group; -Heavy-Duty, Rh | 1 |
185-9929 Tire & Rim Gp -Rh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***29 | Tire & Rim Group; -Rh | 1 |
142-8737 Tire & Rim Gp -Rh
| 14***31 | Wheel As | 1 |
| 14***37 | Tire & Rim Group; -Rh | 1 |
| 15***99 | Valve As-Tire | 1 |
199-5439 Tire & Rim Gp -Rh
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 14***28 | Tire & Rim Group; -Lh | 2 |
| 14***37 | Tire & Rim Group; -Rh | 2 |
154-3979 Tire & Rim Gp -Rh
| 15***99 | Valve As-Tire | 1 |
| 15***79 | Tire & Rim Group; -Rh | 1 |
| 18***35 | Tire; (305-546) | 1 |
185-8676 Tire & Rim Gp -Lh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***76 | Tire & Rim Group; -Lh | 1 |
265-2899 Tire & Rim Gp -Rh
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***30 | Tire-Solid; (33x6x8) | 4 |
| 26***99 | Tire & Rim Group; -Rh | 1 |
185-8675 Tire & Rim Gp -Rh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***75 | Tire & Rim Group; -Rh | 1 |
142-9025 Tire & Rim Gp -Rh
| 14***59 | Wheel As | 1 |
| 14***25 | Tire & Rim Group; -Rh | 1 |
| 15***99 | Valve As-Tire | 1 |
185-8677 Tire & Rim Gp -Rh
| 15***99 | Valve As-Tire | 1 |
| 17***70 | Wheel As | 1 |
| 18***77 | Tire & Rim Group; -Rh | 1 |
252-0346 Wheel & Tire Ar
| 25***46 | Wheel & Tire Ar | 1 |
| 25***79 | Motor & Mtg Group-Hydraulic Fan | 1 |
| 25***96 | Suppression Group-Sound; -Machine | 1 |
252-0347 Wheel & Tire Ar
| 17***16 | Chock | 1 |
| 25***47 | Wheel & Tire Ar | 1 |
| 25***33 | Film-Notice; (Steering) | 1 |
165-4903 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 16***03 | Wheel & Tire Ar; -Heavy Duty | 1 |
| 22***20 | Tire & Rim Group | 4 |
185-8666 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***66 | Wheel & Tire Ar; -Heavy Duty | 1 |
| 22***34 | Tire-Solid; (33x6x11)(Rh) | 2 |
228-9217 Wheel & Tire Ar
| 22***17 | Wheel & Tire Ar | 1 |
| 31***28 | Tire; (33x6x10) | 4 |
252-0366 Wheel & Tire Ar -Solid
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 12***54 | Fastener; (Loop) (22cm) (X3) | 0 |
178-2256 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 17***56 | Wheel & Tire Ar; -Heavy Duty | 1 |
| 22***21 | Tire & Rim Group | 4 |
185-8662 Wheel & Tire Ar -Low Side Wall
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***62 | Wheel & Tire Ar; -Low Side Wall | 1 |
| 26***98 | Tire & Rim Group; -Lh | 2 |
159-5761 Wheel & Tire Ar -Solid
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 15***61 | Wheel & Tire Ar; -Solid | 1 |
| 18***30 | Tire & Rim Group; -Lh | 2 |
142-7494 Wheel & Tire Ar -Pneumatic
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 14***94 | Wheel & Tire Ar; -Pneumatic | 1 |
| 19***38 | Tire & Rim Group; -Lh | 2 |
154-3972 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 15***72 | Wheel & Tire Ar; -Heavy Duty | 1 |
| 18***76 | Tire & Rim Group; -Lh | 2 |
228-9219 Wheel & Tire Ar
| 22***19 | Wheel & Tire Ar | 1 |
| 25***62 | Muffler & Mounting Group | 1 |
| 25***79 | Motor & Mtg Group-Hydraulic Fan | 1 |
165-4898 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 16***98 | Wheel & Tire Ar; -Heavy Duty | 1 |
| 18***24 | Tire & Rim Group; -Lh | 2 |
185-8663 Wheel & Tire Ar -Low Side Wall
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***63 | Wheel & Tire Ar; -Low Side Wall | 1 |
| 26***00 | Tire & Rim Group; -Lh | 2 |
185-8667 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***67 | Wheel & Tire Ar; -Heavy Duty | 1 |
| 22***34 | Tire-Solid; (33x6x11)(Rh) | 2 |
142-7495 Wheel & Tire Ar -Pneumatic
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 14***95 | Wheel & Tire Ar; -Pneumatic | 1 |
| 18***74 | Tire & Rim Group; -Lh | 2 |
154-3973 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 15***73 | Wheel & Tire Ar; -Heavy Duty | 1 |
| 18***28 | Tire & Rim Group; -Lh | 2 |
252-0377 Wheel & Tire Ar -Solid
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***54 | Fastener; (Loop) (22cm) (X3) | 0 |
| 12***55 | Fastener-Hook; (18-cm Each) | 0 |
187-3239 Wheel & Tire Ar
| 18***39 | Wheel & Tire Ar | 1 |
| 22***34 | Tire-Solid; (33x6x11)(Rh) | 2 |
| 22***35 | Tire-Solid; (33x6x11)(Rh) | 2 |
259-9892 Wheel & Tire Gp
| 25***92 | Wheel & Tire Group | 1 |
| 31***41 | Counterweight | 4 |
| 7X***49 | Bolt (M12x1.75x100mm); (M12x1.75x100-mm) | 4 |
317-0691 Wheel & Tire Gp
| 31***91 | Wheel & Tire Group | 1 |
| 31***94 | Grill | 1 |
| 7T***99 | Link | 1 |
Service Equipment And Supplies
280-8329 Bracket Gp-Mounting -Belt Guard
| 28***29 | Bracket Group-Mounting; -Belt Guard | 1 |
238-7734 Film Gp -Un
| 23***34 | Film Group; -Un | 1 |
258-3190 Film Gp
| 25***90 | Film Group | 1 |
258-3230 Film Gp -High Flow Xps
| 25***30 | Film Group; -High Flow Xps | 1 |
289-0848 Film Gp -2-Speed
| 28***48 | Film Group; -2-Speed | 1 |
348-6735 Kit-Muffler
| 34***35 | Kit-Muffler | 1 |
258-3221 Plate & Film Gp
| 25***21 | Plate & Film Group | 1 |
258-3225 Plate & Film Gp
| 25***25 | Plate & Film Group | 1 |
247-0678 Plate & Film Gp
| 24***78 | Plate & Film Group | 1 |
286-9251 Plate & Film Gp
| 28***51 | Plate & Film Group | 1 |
304-5237 Plate & Film Gp
| 30***37 | Plate & Film Group | 1 |
Work Tools
216-8756 Arm Gp-Material Handling
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 21***56 | Arm Group-Material Handling | 1 |
231-5275 Blade Ar -Angling
| 15***59 | Edge | 1 |
| 23***75 | Blade Ar; -Angling | 1 |
| 32***44 | Guard As; (66-In) | 1 |
177-1989 Blade Ar -Angling
| 15***37 | Edge | 1 |
| 17***89 | Blade Ar; -Angling | 1 |
| 32***34 | Guard As; (60-In) | 1 |
177-1990 Blade Ar -Angling
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 17***90 | Blade Ar; -Angling | 1 |
231-5277 Blade Ar -Angling
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 23***77 | Blade Ar; -Angling | 1 |
230-4596 Blade As-Angling
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 23***96 | Blade As-Angling | 1 |
222-7412 Blade As-Angling
| 19***16 | Edge | 1 |
| 22***12 | Blade As-Angling | 1 |
| 32***64 | Guard As; (78-In) | 1 |
177-1988 Blade As-Angling
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 17***88 | Blade As-Angling | 1 |
177-1987 Blade As-Angling
| 15***77 | Edge | 1 |
| 17***87 | Blade As-Angling | 1 |
| 32***54 | Guard As; (72-In) | 1 |
231-5276 Blade Gp-Angling
| 13***84 | Edge Group-Cutting | 1 |
| 23***76 | Blade Group-Angling | 1 |
| 27***37 | Bucket As-Dirt | 1 |
177-1982 Blade Gp-Angling
| 13***87 | Edge Group-Cutting | 1 |
| 17***82 | Blade Group-Angling | 1 |
| 26***84 | Bucket Group-Dirt | 1 |
222-7724 Blade Gp-Angling
| 13***83 | Edge Group-Cutting | 1 |
| 22***24 | Blade Group-Angling | 1 |
| 27***34 | Bucket As-Dirt | 1 |
177-1981 Blade Gp-Angling
| 17***81 | Blade Group-Angling | 1 |
| 29***44 | Edge | 1 |
| 32***74 | Guard As; (84-In) | 1 |
325-7058 Blade Gp-Multipurpose Bucket
| 13***86 | Edge Group-Cutting | 1 |
| 15***25 | Bucket Ar-Grapple; -Industrial | 1 |
| 32***58 | Blade Group-Multipurpose Bucket | 1 |
325-7078 Blade Gp-Multipurpose Bucket
| 28***02 | Bucket Group-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
| 32***78 | Blade Group-Multipurpose Bucket | 1 |
279-5384 Blade Gp-Multipurpose Bucket
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
325-7038 Blade Gp-Multipurpose Bucket
| 15***85 | Bucket Group-Grapple; -Industrial | 1 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***87 | Lines Group-Grapple; -Industrial | 1 |
279-5406 Blade Gp-Multipurpose Bucket
| 19***24 | Edge Group-Cutting | 1 |
| 27***06 | Blade Group-Multipurpose Bucket | 1 |
| 29***70 | Bucket As-General Purpose; -High Capacity | 1 |
325-7079 Blade Gp-Multipurpose Bucket
| 28***00 | Bucket Ar-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
| 32***79 | Blade Group-Multipurpose Bucket | 1 |
325-7049 Blade Gp-Multipurpose Bucket
| 13***85 | Edge Group-Cutting | 1 |
| 15***24 | Bucket Ar-Grapple | 1 |
| 32***49 | Blade Group-Multipurpose Bucket | 1 |
293-0142 Blade Gp-Multipurpose Bucket
| 15***84 | Bucket Group-Grapple; -Industrial | 1 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***87 | Lines Group-Grapple; -Industrial | 1 |
325-7068 Blade Gp-Multipurpose Bucket
| 13***87 | Edge Group-Cutting | 1 |
| 21***29 | Bucket Ar-Grapple | 1 |
| 32***68 | Blade Group-Multipurpose Bucket | 1 |
279-5388 Blade Gp-Multipurpose Bucket
| 13***86 | Edge Group-Cutting | 1 |
| 27***72 | Bucket As-General Purpose | 1 |
| 27***88 | Blade Group-Multipurpose Bucket | 1 |
279-5387 Blade Gp-Multipurpose Bucket
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
325-7069 Blade Gp-Multipurpose Bucket
| 28***99 | Bucket Group-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
| 32***69 | Blade Group-Multipurpose Bucket | 1 |
159-5347 Blade Gp-Multipurpose Bucket
| 13***84 | Edge Group-Cutting | 1 |
| 15***47 | Blade Group-Multipurpose Bucket | 1 |
| 27***64 | Bucket As-General Purpose | 1 |
154-5080 Blade Gp-Multipurpose Bucket
| 13***85 | Edge Group-Cutting | 1 |
| 15***80 | Blade Group-Multipurpose Bucket | 1 |
| 27***40 | Bucket As-Dirt | 1 |
325-7039 Blade Gp-Multipurpose Bucket
| 15***86 | Bucket Group-Grapple; -Industrial | 1 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***87 | Lines Group-Grapple; -Industrial | 1 |
325-7059 Blade Gp-Multipurpose Bucket
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***87 | Lines Group-Grapple; -Industrial | 1 |
| 21***28 | Bucket Group-Grapple | 1 |
279-5385 Blade Gp-Multipurpose Bucket
| 13***85 | Edge Group-Cutting | 1 |
| 27***68 | Bucket As-General Purpose | 1 |
| 27***85 | Blade Group-Multipurpose Bucket | 1 |
279-5395 Blade Gp-Multipurpose Bucket
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
279-5405 Blade Gp-Multipurpose Bucket
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 9 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
325-7048 Blade Gp-Multipurpose Bucket
| 13***84 | Edge Group-Cutting | 1 |
| 15***23 | Bucket Ar-Grapple | 1 |
| 32***48 | Blade Group-Multipurpose Bucket | 1 |
159-5345 Blade Gp-Multipurpose Bucket
| 13***86 | Edge Group-Cutting | 1 |
| 15***45 | Blade Group-Multipurpose Bucket | 1 |
| 28***89 | Bucket As-Dirt | 1 |
279-5396 Blade Gp-Multipurpose Bucket
| 13***87 | Edge Group-Cutting | 1 |
| 27***76 | Bucket As-General Purpose | 1 |
| 27***96 | Blade Group-Multipurpose Bucket | 1 |
285-6090 Bucket Ar-Dirt
| 13***87 | Edge Group-Cutting | 1 |
| 27***24 | Bucket As-Light Material | 1 |
| 28***90 | Bucket Ar-Dirt, Turbocharger | 1 |
268-4083 Bucket Ar-Dirt
| 26***83 | Bucket Ar-Dirt | 1 |
| 28***01 | Bucket Ar-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
279-5441 Bucket Ar-Dirt
| 13***86 | Edge Group-Cutting | 1 |
| 27***21 | Bucket As-Light Material | 1 |
| 27***41 | Bucket Ar-Dirt | 1 |
279-5435 Bucket Ar-Dirt
| 27***35 | Bucket Ar-Dirt | 1 |
| 28***48 | Mounting Group-Cylinder; -Grapple Bucket | 1 |
| 28***51 | Plate & Film Group | 1 |
279-5438 Bucket Ar-Dirt
| 27***38 | Bucket Ar-Dirt | 1 |
| 28***44 | Bucket Group-Grapple | 1 |
| 28***48 | Mounting Group-Cylinder; -Grapple Bucket | 1 |
279-5365 Bucket Ar-General Purpose
| 19***24 | Edge Group-Cutting | 1 |
| 27***65 | Bucket Ar-General Purpose | 1 |
| 27***29 | Bucket As-Light Material | 1 |
279-5369 Bucket Ar-General Purpose
| 15***05 | Bucket Group-Multipurpose | 1 |
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
296-8192 Bucket Ar-General Purpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
| 16***36 | Cover Group-Lines | 1 |
279-5374 Bucket Ar-General Purpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
279-5378 Bucket Ar-General Purpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
| 16***36 | Cover Group-Lines | 1 |
279-5373 Bucket Ar-General Purpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 15***04 | Bucket Ar-Multipurpose | 1 |
279-5366 Bucket Ar-General Purpose
| 27***66 | Bucket Ar-General Purpose | 1 |
| 29***23 | Bucket As-Light Material, Wheel Disc | 1 |
| 29***80 | Edge Group-Cutting | 1 |
279-5370 Bucket Ar-General Purpose
| 15***09 | Bucket Group-Multipurpose | 1 |
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
279-5377 Bucket Ar-General Purpose
| 13***84 | Edge Group-Cutting | 1 |
| 27***77 | Bucket Ar-General Purpose | 1 |
| 27***82 | Bucket Ar-Multipurpose | 1 |
285-6093 Bucket Ar-Grapple
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
| 16***36 | Cover Group-Lines | 1 |
157-7224 Bucket Ar-Grapple
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 15***24 | Bucket Ar-Grapple | 1 |
158-6095 Bucket Ar-Grapple
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 9 |
| 15***95 | Bucket Ar-Grapple; -Industrial | 1 |
286-9300 Bucket Ar-Grapple
| 15***11 | Mounting Group-Cylinder | 1 |
| 16***36 | Cover Group-Lines | 1 |
| 27***69 | Cylinder Group-Hydraulic | 2 |
285-6111 Bucket Ar-Grapple
| 19***24 | Edge Group-Cutting | 1 |
| 28***11 | Bucket Ar-Grapple | 1 |
| 29***39 | Engine; - Assembly, Bucket Ar-Multipurpose | 1 |
217-6229 Bucket Ar-Grapple
| 13***87 | Edge Group-Cutting | 1 |
| 21***29 | Bucket Ar-Grapple | 1 |
| 27***03 | Bucket Ar-Multipurpose | 1 |
286-9301 Bucket Ar-Grapple
| 13***84 | Edge Group-Cutting | 1 |
| 28***01 | Bucket Ar-Grapple | 1 |
| 32***36 | Bucket Ar-Multipurpose, Protective Cover | 1 |
157-7223 Bucket Ar-Grapple
| 13***85 | Edge Group-Cutting | 1 |
| 15***23 | Bucket Ar-Grapple | 1 |
| 27***90 | Bucket Ar-Multipurpose | 1 |
217-6230 Bucket Ar-Grapple
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
| 16***36 | Cover Group-Lines | 1 |
157-7227 Bucket Ar-Grapple
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 15***27 | Bucket Ar-Grapple; -Industrial | 1 |
285-6112 Bucket Ar-Grapple
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
285-6104 Bucket Ar-Grapple
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 9 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
157-7226 Bucket Ar-Grapple
| 13***86 | Edge Group-Cutting | 1 |
| 15***26 | Bucket Ar-Grapple; -Industrial | 1 |
| 27***98 | Bucket Ar-Multipurpose | 1 |
157-7225 Bucket Ar-Grapple -Industrial
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
| 15***25 | Bucket Ar-Grapple; -Industrial | 1 |
279-5430 Bucket Ar-Light Material
279-5425 Bucket Ar-Light Material
279-5420 Bucket Ar-Light Material
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
296-7597 Bucket Ar-Light Material
279-5392 Bucket Ar-Multipurpose
325-7046 Bucket Ar-Multipurpose
| 14***36 | Edge | 1 |
| 32***46 | Bucket Ar-Multipurpose | 1 |
325-7040 Bucket Ar-Multipurpose
| 14***35 | Edge | 1 |
| 32***40 | Bucket Ar-Multipurpose | 1 |
325-7070 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***67 | Bucket As-General Purpose | 1 |
279-5398 Bucket Ar-Multipurpose
325-7075 Bucket Ar-Multipurpose
| 14***37 | Edge | 1 |
| 32***75 | Bucket Ar-Multipurpose | 1 |
325-7080 Bucket Ar-Multipurpose
| 19***22 | Edge | 1 |
| 32***80 | Bucket Ar-Multipurpose | 1 |
325-7055 Bucket Ar-Multipurpose
| 14***37 | Edge | 1 |
| 32***55 | Bucket Ar-Multipurpose | 1 |
325-7066 Bucket Ar-Multipurpose
| 14***36 | Edge | 1 |
| 32***66 | Bucket Ar-Multipurpose | 1 |
325-7045 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***36 | Bucket As-Dirt | 1 |
279-5391 Bucket Ar-Multipurpose
325-7036 Bucket Ar-Multipurpose
279-5380 Bucket Ar-Multipurpose
154-5004 Bucket Ar-Multipurpose
279-5381 Bucket Ar-Multipurpose
325-7056 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 28***88 | Bucket As-Dirt | 1 |
279-5390 Bucket Ar-Multipurpose
279-5399 Bucket Ar-Multipurpose
325-7050 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***39 | Bucket As-Dirt | 1 |
279-5402 Bucket Ar-Multipurpose
279-5382 Bucket Ar-Multipurpose
325-7060 Bucket Ar-Multipurpose
| 14***35 | Edge | 1 |
| 32***60 | Bucket Ar-Multipurpose | 1 |
296-8055 Bucket Ar-Multipurpose
279-5403 Bucket Ar-Multipurpose
154-5046 Bucket Ar-Multipurpose
279-5400 Bucket Ar-Multipurpose
296-8057 Bucket Ar-Multipurpose
279-5401 Bucket Ar-Multipurpose
154-5010 Bucket Ar-Multipurpose
325-7035 Bucket Ar-Multipurpose
325-7076 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***71 | Bucket As-General Purpose | 1 |
325-7065 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***63 | Bucket As-General Purpose | 1 |
293-0139 Bucket Ar-Multipurpose
285-6100 Bucket Ar-Utility
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 28***00 | Bucket Ar-Utility | 1 |
285-6095 Bucket Ar-Utility
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***75 | Bucket As-General Purpose | 1 |
285-6101 Bucket Ar-Utility
| 22***32 | Edge | 1 |
| 28***01 | Bucket Ar-Utility | 1 |
165-6156 Bucket As-Dirt
| 14***37 | Edge | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
| 16***56 | Bucket As-Dirt | 1 |
285-6089 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 28***89 | Bucket As-Dirt | 1 |
152-0227 Bucket As-Dirt
| 14***36 | Edge | 1 |
| 15***27 | Bucket As-Dirt | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
279-5440 Bucket As-Dirt
| 22***82 | Edge | 1 |
| 27***40 | Bucket As-Dirt | 1 |
285-6088 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***28 | Bucket As-Light Material | 1 |
279-5437 Bucket As-Dirt
| 19***22 | Edge | 1 |
| 27***37 | Bucket As-Dirt | 1 |
279-5436 Bucket As-Dirt
| 14***37 | Edge | 1 |
| 27***36 | Bucket As-Dirt | 1 |
279-5433 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 21***26 | Bucket As-Grapple | 1 |
165-6157 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***87 | Bucket As-Grapple; -Industrial | 1 |
| 16***57 | Bucket As-Dirt | 1 |
279-5434 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***22 | Bucket As-Light Material | 1 |
268-4089 Bucket As-Dirt
| 16***30 | Plate-Identification; (Cat) | 2 |
| 19***22 | Edge | 1 |
| 26***89 | Bucket As-Dirt | 1 |
188-3526 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***89 | Bucket As-Grapple | 1 |
| 16***89 | Tack-Fastener | 4 |
279-5439 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***23 | Bucket As-Light Material | 1 |
141-6704 Bucket As-Dirt
| 14***04 | Bucket As-Dirt | 1 |
| 14***35 | Edge | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
188-2716 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***88 | Bucket As-Grapple | 1 |
| 16***89 | Tack-Fastener | 4 |
279-5364 Bucket As-General Purpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***32 | Bucket As-Utility | 1 |
| 16***89 | Tack-Fastener | 4 |
279-5367 Bucket As-General Purpose
| 11***83 | Boss; (M10x1.5-Thd) | 4 |
| 14***36 | Edge | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
279-5368 Bucket As-General Purpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***37 | Bucket As-Utility | 1 |
| 16***89 | Tack-Fastener | 4 |
279-5375 Bucket As-General Purpose
| 14***36 | Edge | 1 |
| 27***75 | Bucket As-General Purpose | 1 |
292-9270 Bucket As-General Purpose -High Capacity
| 13***84 | Edge Group-Cutting | 1 |
| 16***56 | Bucket As-Dirt | 1 |
| 29***70 | Bucket As-General Purpose; -High Capacity | 1 |
279-5371 Bucket As-General Purpose
| 14***35 | Edge | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
| 27***71 | Bucket As-General Purpose | 1 |
279-5372 Bucket As-General Purpose
| 14***35 | Edge | 1 |
| 27***72 | Bucket As-General Purpose | 1 |
292-9271 Bucket As-General Purpose
| 13***85 | Edge Group-Cutting | 1 |
| 16***57 | Bucket As-Dirt | 1 |
| 29***71 | Bucket As-General Purpose, Cap | 1 |
279-5376 Bucket As-General Purpose
| 14***37 | Edge | 1 |
| 27***76 | Bucket As-General Purpose | 1 |
279-5363 Bucket As-General Purpose
| 27***63 | Bucket As-General Purpose | 1 |
| 29***57 | Edge | 1 |
169-8942 Bucket As-Grapple
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***42 | Bucket As-Grapple; -Industrial | 2 |
156-0888 Bucket As-Grapple
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***88 | Bucket As-Grapple | 1 |
| 16***89 | Tack-Fastener | 4 |
169-8943 Bucket As-Grapple
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***43 | Bucket As-Grapple | 2 |
217-6226 Bucket As-Grapple
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 21***26 | Bucket As-Grapple | 1 |
156-0887 Bucket As-Grapple
| 13***86 | Edge Group-Cutting | 1 |
| 15***87 | Bucket As-Grapple; -Industrial | 1 |
| 18***26 | Bucket As-Dirt | 1 |
217-6227 Bucket As-Grapple
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
169-8941 Bucket As-Grapple
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***41 | Bucket As-Grapple; -Industrial | 2 |
156-0889 Bucket As-Grapple
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 9 |
| 15***89 | Bucket As-Grapple | 1 |
279-5422 Bucket As-Light Material
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 27***22 | Bucket As-Light Material | 1 |
279-5429 Bucket As-Light Material
| 15***12 | Pin | 2 |
| 15***53 | Clam As-Multipurpose Bucket | 1 |
| 27***88 | Blade Group-Multipurpose Bucket | 1 |
279-5424 Bucket As-Light Material
| 15***12 | Pin | 2 |
| 15***70 | Clam As-Multipurpose Bucket | 1 |
| 15***47 | Blade Group-Multipurpose Bucket | 1 |
279-5421 Bucket As-Light Material
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 27***21 | Bucket As-Light Material | 1 |
279-5423 Bucket As-Light Material
| 14***32 | Clam As-Multipurpose Bucket | 1 |
| 15***12 | Pin | 2 |
| 15***45 | Blade Group-Multipurpose Bucket | 1 |
292-9223 Bucket As-Light Material
| 15***12 | Pin | 2 |
| 15***70 | Clam As-Multipurpose Bucket | 1 |
| 27***96 | Blade Group-Multipurpose Bucket | 1 |
279-5428 Bucket As-Light Material
| 14***32 | Clam As-Multipurpose Bucket | 1 |
| 15***12 | Pin | 2 |
| 27***84 | Blade Group-Multipurpose Bucket | 1 |
292-9224 Bucket As-Light Material
| 15***12 | Pin | 2 |
| 19***08 | Clam As-Multipurpose Bucket | 1 |
| 27***05 | Blade Group-Multipurpose Bucket | 1 |
165-8837 Bucket As-Utility
| 15***12 | Pin | 2 |
| 15***70 | Clam As-Multipurpose Bucket | 1 |
| 16***37 | Bucket As-Utility | 1 |
165-8835 Bucket As-Utility
| 15***12 | Pin | 2 |
| 15***53 | Clam As-Multipurpose Bucket | 1 |
| 16***35 | Bucket As-Utility | 1 |
285-6097 Bucket As-Utility
| 15***12 | Pin | 2 |
| 19***08 | Clam As-Multipurpose Bucket | 1 |
| 28***97 | Bucket As-Utility | 1 |
165-8832 Bucket As-Utility
| 14***32 | Clam As-Multipurpose Bucket | 1 |
| 15***12 | Pin | 2 |
| 16***32 | Bucket As-Utility | 1 |
165-8746 Bucket As-Utility
| 15***12 | Pin | 2 |
| 16***46 | Bucket As-Utility | 1 |
| 29***42 | Blade Group-Multipurpose Bucket | 1 |
285-6098 Bucket As-Utility
| 15***12 | Pin | 2 |
| 15***38 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
| 28***98 | Bucket As-Utility, Fuel Injection Pump; - Assembly | 1 |
285-6103 Bucket As-Utility
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 28***97 | Bucket As-Utility | 1 |
152-0232 Bucket Gp-Dirt
| 15***32 | Bucket Group-Dirt | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
152-0231 Bucket Gp-Dirt
| 15***31 | Bucket Group-Dirt | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
188-2719 Bucket Gp-Dirt
| 18***19 | Bucket Group-Dirt | 1 |
| 19***43 | Fork Group-Pallet | 2 |
| 26***81 | Carriage Group-Fork | 1 |
268-4084 Bucket Gp-Dirt
| 19***42 | Fork Group-Pallet | 2 |
| 26***81 | Carriage Group-Fork | 1 |
| 26***84 | Bucket Group-Dirt | 1 |
296-8191 Bucket Gp-General Purpose
| 19***45 | Fork Group-Pallet | 2 |
| 26***81 | Carriage Group-Fork | 1 |
| 29***91 | Bucket Group-General Purpose | 1 |
286-9278 Bucket Gp-Grapple
| 15***35 | Plate-Instruction; (Load Capacity) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 25***95 | Step As | 1 |
156-0885 Bucket Gp-Grapple
| 15***85 | Bucket Group-Grapple; -Industrial | 1 |
| 19***43 | Fork Group-Pallet | 2 |
| 35***71 | Carriage Group-Fork | 1 |
156-0884 Bucket Gp-Grapple
| 15***84 | Bucket Group-Grapple; -Industrial | 1 |
| 35***71 | Carriage Group-Fork | 6 |
279-5359 Bucket Gp-Grapple -Industrial
| 15***35 | Plate-Instruction; (Load Capacity) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 25***95 | Step As | 1 |
217-6228 Bucket Gp-Grapple
| 19***45 | Fork Group-Pallet | 2 |
| 21***28 | Bucket Group-Grapple | 1 |
| 35***71 | Carriage Group-Fork | 1 |
156-0886 Bucket Gp-Grapple
| 15***86 | Bucket Group-Grapple; -Industrial | 1 |
| 19***42 | Fork Group-Pallet | 2 |
| 35***71 | Carriage Group-Fork | 1 |
286-9244 Bucket Gp-Grapple
| 26***81 | Carriage Group-Fork | 6 |
| 28***44 | Bucket Group-Grapple | 1 |
279-5397 Bucket Gp-Multipurpose
| 14***05 | Bearing-Sleeve | 4 |
| 16***30 | Plate-Identification; (Cat) | 2 |
| 22***32 | Edge | 1 |
325-7077 Bucket Gp-Multipurpose
| 19***40 | Cylinder Group-Hydraulic; -Coupler | 1 |
| 19***42 | Pin | 1 |
| 21***57 | Link Group-Coupler | 1 |
279-5404 Bucket Gp-Multipurpose
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
279-5389 Bucket Gp-Multipurpose
| 14***05 | Bearing-Sleeve | 4 |
| 15***38 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
| 16***30 | Plate-Identification; (Cat) | 2 |
293-0141 Bucket Gp-Multipurpose
| 25***00 | Coupler Group-Quick | 1 |
| 28***90 | Fitting Group-Hydraulic; -Manual | 1 |
| 29***41 | Bucket Group-Multipurpose | 1 |
325-7047 Bucket Gp-Multipurpose
| 13***79 | Washer; (11x32x3-mm Thk) | 2 |
| 13***51 | Spacer; (11x19x6-mm Thk) | 2 |
| 15***97 | Spring | 2 |
325-7067 Bucket Gp-Multipurpose
| 16***28 | Plate | 1 |
| 32***67 | Bucket Group-Multipurpose | 1 |
| 5C***53 | Bolt (M6x1.00x16mm); (M6x1x16mm Thk) | 5 |
154-5009 Bucket Gp-Multipurpose
| 14***05 | Bearing-Sleeve | 4 |
| 14***36 | Edge | 1 |
| 15***09 | Bucket Group-Multipurpose | 1 |
325-7037 Bucket Gp-Multipurpose
| 25***24 | Lines Group-Coupler | 1 |
| 25***01 | Coupler Group-Quick | 1 |
| 25***90 | Wiring Group-Quick Coupler | 1 |
325-7057 Bucket Gp-Multipurpose
| 20***85 | Pin | 2 |
| 21***62 | Cylinder & Link Group-Coupler; -Lh | 1 |
| 21***63 | Cylinder & Link Group-Coupler; -Rh | 1 |
154-5005 Bucket Gp-Multipurpose
| 14***05 | Bearing-Sleeve | 4 |
| 14***35 | Edge | 1 |
| 15***05 | Bucket Group-Multipurpose | 1 |
279-5383 Bucket Gp-Multipurpose
| 14***05 | Bearing-Sleeve | 4 |
| 14***37 | Edge | 1 |
| 15***38 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
285-6099 Bucket Gp-Utility
| 14***14 | Edge-Cutting | 1 |
| 28***99 | Bucket Group-Utility | 1 |
| 3F***08 | Bolt-Plow; (5/8-11x2.25-In) | 10 |
285-6096 Bucket Gp-Utility
| 19***40 | Cylinder Group-Hydraulic; -Coupler | 1 |
| 19***42 | Pin | 1 |
| 21***57 | Link Group-Coupler | 1 |
285-6102 Bucket Gp-Utility
| 14***88 | Edge-Cutting | 1 |
| 28***02 | Bucket Group-Utility | 1 |
| 3F***08 | Bolt-Plow; (5/8-11x2.25-In) | 13 |
293-9427 Carriage & Fork Ar
| 13***93 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 6 |
| 29***27 | Carriage & Fork Ar | 1 |
293-9429 Carriage & Fork Ar
| 13***95 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 8 |
| 29***29 | Carriage & Fork Ar | 1 |
353-1693 Carriage & Fork Ar
| 13***96 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 11 |
| 35***93 | Carriage & Fork Ar | 1 |
293-9428 Carriage & Fork Ar
| 13***94 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 8 |
| 29***28 | Carriage & Fork Ar | 1 |
353-1694 Carriage & Fork Ar
| 13***97 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 11 |
| 35***94 | Carriage & Fork Ar | 1 |
353-1696 Carriage & Fork Ar
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 7 |
| 19***24 | Edge-Cutting | 1 |
| 35***96 | Carriage & Fork Ar | 1 |
353-1697 Carriage & Fork Ar
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 11 |
| 19***24 | Edge-Cutting | 1 |
| 35***97 | Carriage & Fork Ar | 1 |
261-6681 Carriage Gp-Fork
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 13 |
| 26***81 | Carriage Group-Fork | 1 |
| 29***02 | Edge-Cutting | 1 |
351-9371 Carriage Gp-Fork
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***14 | Fork Group-Grapple; -Industrial | 2 |
| 27***75 | Cylinder Group-Grapple; -Industrial | 2 |
293-9426 Carriage Gp-Fork
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***14 | Fork Group-Grapple; -Industrial | 9 |
| 27***75 | Cylinder Group-Grapple; -Industrial | 2 |
293-0148 Clam As-Multipurpose Bucket
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 9 |
| 29***48 | Clam As-Multipurpose Bucket | 1 |
199-8308 Clam As-Multipurpose Bucket
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
154-5053 Clam As-Multipurpose Bucket
| 15***53 | Clam As-Multipurpose Bucket | 1 |
| 28***10 | Fork Group-Grapple | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
154-5070 Clam As-Multipurpose Bucket
| 15***70 | Clam As-Multipurpose Bucket | 1 |
| 16***54 | Tine | 1 |
| 3E***70 | Pin; (Spring) | 1 |
149-4232 Clam As-Multipurpose Bucket
| 14***32 | Clam As-Multipurpose Bucket | 1 |
| 28***05 | Fork Group-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
296-0582 Conversion Gp-Work Tool -Kit, High Flow
| 22***29 | Positioner Group-Fork | 1 |
| 29***82 | Conversion Group-Work Tool; -Kit, High Flow | 1 |
258-2791 Coupler Ar-Quick
| 22***29 | Positioner Group-Fork | 1 |
| 25***91 | Coupler Ar-Quick | 1 |
258-2790 Coupler Ar-Quick
| 22***29 | Positioner Group-Fork | 1 |
| 25***90 | Coupler Ar-Quick | 1 |
258-2501 Coupler Gp-Quick
| 19***42 | Fork Group-Pallet | 12 |
| 22***29 | Positioner Group-Fork | 1 |
| 25***01 | Coupler Group-Quick | 1 |
258-2500 Coupler Gp-Quick
| 19***43 | Fork Group-Pallet | 12 |
| 22***29 | Positioner Group-Fork | 1 |
| 25***00 | Coupler Group-Quick | 1 |
162-5236 Cover Gp-Lines
| 16***36 | Cover Group-Lines | 1 |
| 19***45 | Fork Group-Pallet | 12 |
| 22***29 | Positioner Group-Fork | 1 |
215-3962 Cylinder & Link Gp-Coupler -Lh
| 16***41 | Tine | 1 |
| 21***62 | Cylinder & Link Group-Coupler; -Lh | 1 |
| 9R***59 | Clip | 1 |
215-3963 Cylinder & Link Gp-Coupler -Rh
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 7 |
| 16***38 | Fork Group-Utility | 1 |
222-7545 Edge Gp-Bit & Cutting
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 9 |
| 16***39 | Fork Group-Utility | 1 |
222-7546 Edge Gp-Bit & Cutting
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***44 | Fork As; (Utility) | 1 |
135-9386 Edge Gp-Cutting
| 13***86 | Edge Group-Cutting | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
296-7680 Edge Gp-Cutting
| 15***11 | Pin | 4 |
| 15***35 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
| 16***43 | Arm As | 1 |
135-9384 Edge Gp-Cutting
| 13***84 | Edge Group-Cutting | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 7 |
135-9387 Edge Gp-Cutting
| 13***87 | Edge Group-Cutting | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
149-5741 Edge Gp-Cutting
| 14***41 | Edge Group-Cutting | 1 |
| 16***95 | Cylinder Group-Grapple | 1 |
| 16***31 | Mounting Group-Cylinder; -Utility | 1 |
135-9383 Edge Gp-Cutting
| 13***83 | Edge Group-Cutting | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
135-9385 Edge Gp-Cutting
| 13***85 | Edge Group-Cutting | 1 |
| 17***14 | Pin As | 1 |
| 17***55 | Shim; (1-mm Thk) | 1 |
195-7124 Edge Gp-Cutting
| 16***31 | Mounting Group-Cylinder; -Utility | 1 |
| 16***40 | Grapple Group-Utility | 1 |
| 17***36 | Bolt; (M12x1.75x35-mm) | 4 |
279-5360 Fork Ar-Grapple -Industrial
| 19***37 | Plate | 1 |
| 19***45 | Spring | 1 |
| 19***54 | Pin-Spring | 2 |
279-5350 Fork Ar-Grapple -Industrial
| 19***37 | Plate | 1 |
| 19***45 | Spring | 1 |
| 19***54 | Pin-Spring | 2 |
285-6114 Fork Ar-Grapple -Utility
| 03***57 | Washer; (13x26x6-mm Thk) | 2 |
| 17***53 | Plate | 2 |
| 18***97 | Plate Group-Roading; -Lh | 1 |
285-6115 Fork Ar-Grapple -Utility
| 03***57 | Washer; (13x26x6-mm Thk) | 4 |
| 17***14 | Film-Stripe; (Reflective, Red, White) | 1 |
| 17***15 | Film; (Reflective)(Warning) | 1 |
285-6110 Fork Gp-Grapple
| 19***37 | Plate | 1 |
| 19***38 | Bracket | 1 |
| 19***54 | Pin-Spring | 2 |
164-9614 Fork Gp-Grapple -Industrial
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 06***51 | Clamp | 4 |
| 10***59 | Spacer; (9x20x39.2-mm Thk) | 1 |
279-5351 Fork Gp-Grapple -Industrial
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 06***51 | Clamp | 4 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 4 |
195-6942 Fork Gp-Pallet
| 19***45 | Spring | 1 |
| 19***42 | Fork Group-Pallet | 1 |
| 30***68 | Pin-Spring | 1 |
195-8545 Fork Gp-Pallet
| 16***60 | Pin-Spring | 1 |
| 19***42 | Pin | 1 |
| 19***45 | Fork Group-Pallet | 1 |
195-6943 Fork Gp-Pallet
| 17***47 | Pin | 1 |
| 19***43 | Fork Group-Pallet | 1 |
| 9R***01 | Pin-Cotter | 1 |
243-0002 Fork Gp-Pallet -Kit
| 17***14 | Film-Stripe; (Reflective, Red, White) | 1 |
| 17***15 | Film; (Reflective)(Warning) | 1 |
| 17***50 | Plate As; (Lh) | 1 |
243-0001 Fork Gp-Pallet -Kit
| 16***60 | Pin-Spring | 1 |
| 19***42 | Pin | 1 |
| 24***01 | Fork Group-Pallet; -Kit | 1 |
243-0003 Fork Gp-Pallet -Kit
| 17***14 | Film-Stripe; (Reflective, Red, White) | 1 |
| 17***15 | Film; (Reflective)(Warning) | 1 |
| 17***51 | Plate As; (Rh) | 1 |
165-8732 Fork Gp-Utility
| 16***32 | Fork Group-Utility | 1 |
| 17***41 | Spring | 4 |
| 17***73 | Plate As | 1 |
165-8737 Fork Gp-Utility
| 16***37 | Fork Group-Utility | 1 |
| 2S***08 | Washer-Retaining; (0.531x3.25x0.438-In Thk) | 2 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 1 |
165-8739 Fork Gp-Utility
| 16***39 | Fork Group-Utility | 1 |
| 19***06 | Cap As; (Water Tank) | 1 |
| 19***07 | Fitting-Drain | 1 |
285-6105 Fork Gp-Utility
| 25***27 | Screw-Truss Head; (No 12x17.46-mm) | 4 |
| 25***98 | Holder-Cup | 1 |
| 25***99 | Tray; (Change) | 1 |
165-8738 Fork Gp-Utility
| 11***14 | Screen; (Water Tank) | 1 |
| 11***15 | Gasket | 1 |
| 16***38 | Fork Group-Utility | 1 |
165-8736 Fork Gp-Utility
| 16***36 | Fork Group-Utility | 1 |
| 18***86 | Step As | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
230-5670 Frame Gp-Blade
| 23***70 | Frame Group-Blade | 1 |
279-5352 Frame Gp-Fork -Industrial
| 27***52 | Frame Group-Fork; -Industrial | 1 |
279-5358 Frame Gp-Fork -Industrial
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 20***45 | Strap-Cable | 2 |
| 25***92 | Seal | 1 |
285-6116 Grapple & Cylinder Gp-Utility
| 10***74 | Seal-Connector | 3 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
165-8740 Grapple Gp-Utility
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***31 | Switch-Temperature; (Air Conditioner) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
258-2538 Handle & Pin Gp-Coupler -Lh
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
| 25***38 | Handle & Pin Group-Coupler; -Lh | 1 |
258-2536 Handle & Pin Gp-Coupler -Rh
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 22***57 | Switch As-Limit; (Load Control) | 1 |
177-9152 Kit-Roading Plate & Mounting -Bucket
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
319-9480 Kit-Roading Plate & Mounting -Bucket
| 25***66 | Installation Group-Radio | 1 |
| 25***90 | Window Group-Cab; -Side | 1 |
| 25***29 | Accessory Group-Cab | 1 |
258-3645 Kit-Water Tank & Mounting
| 25***45 | Kit-Water Tank & Mounting | 1 |
| 25***10 | Window Group-Cab | 1 |
| 25***20 | Liner Group-Cab | 1 |
346-1833 Kit-Water Tank & Mounting
| 34***33 | Kit-Water Tank & Mounting | 1 |
| 8T***42 | Rod End-Yoke | 1 |
| 8T***44 | Pin As-Spring | 1 |
215-3957 Link Gp-Coupler
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***93 | Lockwasher | 1 |
| 21***57 | Link Group-Coupler | 1 |
175-4238 Lock Gp-Quick Coupler -Mechanical
| 11***15 | Relay As; (12-Volt)(Junction Box) | 1 |
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 25***84 | Bracket As; (Upper Lh) | 1 |
258-2535 Lock Gp-Quick Coupler -Rh
| 25***35 | Lock Group-Quick Coupler; -Rh | 1 |
| 26***29 | Shroud As | 1 |
| 28***41 | Coil As | 1 |
258-2537 Lock Gp-Quick Coupler -Lh
| 10***33 | Kit; (Receptacle) (Includes Receptacle As) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***16 | Terminal | 1 |
184-6097 Plate Gp-Roading -Lh
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 2 |
| 10***33 | Kit; (Receptacle) (Includes Receptacle As) | 1 |
| 10***95 | Terminal-Blade; (14-Ga To 18-Ga) | 2 |
184-6098 Plate Gp-Roading -Rh
| 18***98 | Plate Group-Roading; -Rh | 1 |
| 25***71 | Switch As; (Temperature Control) | 1 |
| 25***72 | Switch As; (Blower Fan Speed) | 1 |
177-1983 Spring Gp-Blade
| 17***83 | Spring Group-Blade | 1 |
| 26***66 | Control Group-Joystick; -Lh | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
188-7733 Step Gp-Material Handling Arm
| 18***33 | Step Group-Material Handling Arm | 1 |
| 26***65 | Control Group-Joystick; -Lh, High Flow | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
173-7407 Stop Gp-Bucket -Utility
| 17***07 | Stop Group-Bucket; -Utility | 1 |
| 26***64 | Control Group-Joystick; -Rh | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
116-2001 Strainer Gp-Water
| 11***01 | Strainer Group-Water | 1 |
| 26***62 | Control Group-Joystick; -Rh | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
166-2551 Tank Gp-Water
| 16***51 | Tank Group-Water | 1 |
| 26***63 | Control Group-Joystick; -Rh, High Flow | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
141-4999 Tooth Gp-Uni
| 14***99 | Tooth Group-Uni | 1 |
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 9 |
246C serial number reference
On a 246C the PIN plate sits at the rear of the machine on the left side, under or near the left lift-arm support, with a duplicate VIN stamped into the frame behind the left front tire (moved to the right side on later-production C-model-and-newer machines from 2014). Read the first 3 characters as the serial prefix (JAY for this model) and the following 5 digits as the build sequence number; the full PIN also carries plant and check-digit characters around this core code.
| Prefix | Identifies | Notes |
|---|---|---|
| JAY | 246C skid steer loader, full production run (all hydraulic configurations) | Only PIN prefix documented for the 246C, sequence starting at JAY00001-up. Field-observed and dealer-listed units run from roughly JAY01400 through JAY06700+, consistent with production from about 2007 into the mid-2010s. Fitted with the Cat 3044C DIT diesel, marketed as the Cat C3.4 DIT, a turbocharged direct-injection 4-cylinder rated near 55 kW (74 hp) gross / 54 kW (73 hp) net at 2500 rpm. Same prefix covers standard-flow machines and the Two-Speed High-Flow XPS hydraulic option; no separate prefix found for the high-flow variant. |
Frequently asked questions
What engine does the Caterpillar 246C use?
A turbocharged, direct-injection 4-cylinder Cat 3044C DIT diesel, later relabeled the Cat C3.4 DIT as a Series 2, Tier 4 Interim/Stage IIIA update on the same 3.3 L block. Output is rated 55 kW (74 hp) gross and 54 kW (73 hp) net at 2,500 rpm.
What is the operating weight of the Caterpillar 246C?
About 3,393 kg (7,480 lb) per the factory spec sheet. Some published figures run closer to 3,347 kg (7,381 lb); the difference comes down to cab, counterweight, and tire configuration rather than a different machine.
What replaced the Caterpillar 246C?
Caterpillar succeeded it with the 246D around 2013, which kept the same rated-capacity class but added a redesigned tubular-steel lift arm and an updated, Tier 4 Final version of the engine. The 246D was later refined again as the 246D3.
What 246C owners discuss
How does the hydrostatic drive typically act up on a 246C, and what do techs check before condemning a pump or motor?
The classic complaint is travel power that feels weak at low engine speed, partially recovers at high idle, but never feels fully strong. Before anyone pulls a pump or motor, the usual first step is a stall-pressure and charge-pressure check on each drive pump in both directions. A line relief/charge valve that isn't holding on one pump can drop charge pressure and mimic a bad motor, so pressure testing is used to rule that out before spending money on a component swap.
What's the most commonly reported drive motor failure on this machine?
A seal leak on one of the drive motors, most often mentioned on the left side, shows up repeatedly as oil weeping from the motor housing rather than a sudden stall. It's a gradual leak, not a dead motor. After the motor is removed and reworked, the fix only sticks if every hose on that side goes back to its correct port and the circuit is bled properly - a rushed reassembly is the reason some owners see the same no-drive or weak-drive symptom return after the repair.
What engine quirks come up most often for the 246C's turbocharged diesel?
The 246C (C-Series) runs the Cat C3.4 DIT engine, a direct-injection turbocharged 4-cylinder - this is a different engine generation than the earlier 246 and 246B, so troubleshooting notes for those models don't carry over cleanly. Hard starting and random stalling get traced most often to air trapped in the fuel system or a dirty fuel filter, not injector failure - bleeding the fuel system is the first move before condemning an injector. A gradual loss of power is most often a plugged air filter element; power returning fully after a new element rules out a fuel-side problem. A knock on startup points to a low oil level or injection timing drift, so an oil check comes before any timing work. Turbo oil weeping on this engine is generally traced to crankcase pressure from a restricted breather rather than a bad turbo seal - check crankcase ventilation before replacing the turbo.
Why won't the two-speed (high-flow travel) function engage on some 246C units?
The typical complaint is pressing the two-speed switch and pulling the trigger with no response. Troubleshooting starts by confirming power reaches the two-speed solenoid when the trigger is pulled, then inspecting that section of harness for chafing or damage. If the solenoid coil measures within spec and the harness checks out on a resistance test, the fault is generally pointed at the ECM, since a harness that passes electrical testing rules out the wiring as the cause.
What electrical and sensor faults show up most on the 246C's joystick controls and safety interlocks?
A flashing warning icon paired with a joystick that stops responding is generally a control-circuit fault rather than a hydraulic one - checking the joystick harness connectors and ECM pins for corrosion resolves more of these cases than replacing the joystick handle. Auxiliary lever position-sensor fault codes are commonly traced to a loose or corroded connection at the sensor itself rather than sensor failure, so cleaning and reseating connectors is the first step. Separately, flashing park brake and seat belt lights that lock out travel and loader function are usually caused by a faulty brake-pedal switch, a bad seat belt buckle sensor, or a short between the two park-brake circuit wires rather than a solenoid failure. Because this circuit controls the park brake and travel interlock, treat any fix here as safety-critical and have your dealer verify the repair before returning the machine to work.
What wear patterns are typical for the tires and loader-arm pins on this class of skid steer?
Tires are consistently flagged as the biggest wear-cost item on a machine this size - uneven tread wear, low inflation, and loose lug nuts are the standard checks owners repeat. On the loader arm linkage, skipped daily greasing is named again and again as the leading cause of pin and bushing failure: a dry pin can gall and seize inside its bushing, turning a missed grease interval into a pin-and-bushing replacement job. The consistent advice is to grease lift-arm and cylinder pivot pins after every day of use rather than on a weekly schedule.
What should a buyer check before purchasing a used 246C?
Cycle the bucket up and hold it - a bucket that sinks or twists under its own weight points to worn cylinder seals or a valve leaking internally, and drift rate is one of the more reliable pre-purchase checks people cite. Inspect the lift and tilt cylinder rods for pitting or dents, since even a small dent can score the cylinder bore. Look for hydraulic leaks around the auxiliary circuit - light weeping is normal on an older unit, but pooling oil or a damaged hose is not. Check tire condition, inflation, and lug torque, since replacement is one of the largest expenses on a machine this size. Cycle every joystick function, including auxiliary switches and two-speed travel, to catch an intermittent electro-hydraulic control fault before it shows up as a dash warning later. Ask for maintenance records: this platform is commonly cited as reaching roughly 8,000-10,000 hours before major engine or hydrostatic work with consistent maintenance, but that range varies by duty cycle and service history, so hour count alone isn't a reliable stand-in for records.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 246C part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.