Caterpillarskid steer loader
Caterpillar 236B
Maintenance schedule, common problems & OEM parts breakdown
The Cat 236B is a compact, wheeled radial-lift skid steer loader built for general construction, landscaping, and agricultural work. It runs a 3.3-3.4L four-cylinder turbocharged diesel, catalogued under both the Cat 3044C DIT and Cat C3.4 DIT designations, delivering roughly 70-71 hp (52-53 kW) net and 73-75 hp gross depending on series. Operating weight holds steady at about 7,005-7,007 lb (3,180 kg) across its production run. Caterpillar built the 236B from about 2004 through 2011 across three internal series revisions, following the smaller, Cat 3034C-powered 236 and preceding the Tier 4 Final Cat 236D. Buyers could spec an open (OROPS) or enclosed heated/AC cab, a 2-speed travel option, an optional counterweight for extra lift capacity, and standard or high-flow auxiliary hydraulics for attachments.
Series 1 machines carried a 1,750 lb rated operating capacity; Series 2 and Series 3 re-rated the same chassis to 1,950 lb (up to roughly 1,850-2,050 lb with the counterweight option) under a revised capacity standard, alongside minor control and comfort updates rather than a driveline redesign. All three series share the same engine family, hydrostatic drive pumps and motors, and roller-chain final drive inside the chain case, so parts and service knowledge carry across the whole run. That commonality, plus its position just ahead of Tier 4 emissions hardware, keeps the 236B a popular, mechanically simple entry point in the used compact-loader market and a steady source of demand for remanufactured hydrostatic and chain-case components.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 236B specifications
Engine
| Engine model | 3044C DIT four-cylinder turbocharged diesel on Series I machines; C3.4 DIT four-cylinder turbocharged diesel on Series II and Series III machines (same engine family under Cat's later designation). |
| Gross power | 54-56 kW (73-75 hp) at 2,600 rpm, SAE J1995, varies slightly by series. |
| Net power | 52-53 kW (70-71 hp), SAE J1349 / ISO 9249, consistent across series. |
| Displacement | 3.3 L (201 cu in), four cylinders inline, turbocharged direct injection. Some Series III listings show 3.4 L (207.5 cu in). |
| Cylinders | 4, inline, turbocharged, direct injection, water-cooled. |
| Emissions tier | Series I meets U.S. EPA Tier 2. Series III meets U.S. EPA Tier 4 Interim / EU Stage IIIA. |
Weights
| Operating weight | 3,175-3,180 kg (7,005-7,007 lb), consistent across Series I, II and III. |
Dimensions
| Transport length, with bucket on ground | 3.51-3.55 m (138-140 in). |
| Length, without bucket | 2.80 m (9.19 ft). |
| Transport width, over tires | 1.68 m (66 in). |
| Transport height, to cab top | 2.09-2.10 m (82.2-82.9 in). |
| Height, lift arms raised | 3.97 m (156 in). |
| Wheelbase | 1.13-1.16 m (44.6-45.6 in). |
| Ground clearance | 236 mm (9.3 in). |
Performance
| Travel speed, standard | 12.1-12.3 km/h (7.5-7.6 mph), forward and reverse. |
| Travel speed, 2-speed option | 18.0-18.7 km/h (11.2-11.6 mph). |
| Rated operating capacity | 793 kg (1,750 lb) on Series I; 885-930 kg (1,950-2,050 lb) on Series II/III depending on counterweight configuration. |
| Tipping load | 1,769-1,820 kg (3,900-4,012 lb), varies by series. |
| Breakout force, lift cylinder | 2,032-2,112 kg (4,480-4,656 lb). |
| Breakout force, tilt cylinder | 2,487-2,488 kg (5,484-5,485 lb). |
| Maximum lift height, to hinge pin | 3.10 m (122 in). |
| Dump height | 2,395-2,400 mm (94.3-94.5 in). |
| Hydraulic pump flow | 83 L/min (21.9-22 gpm). |
| Hydraulic system relief pressure | 230 bar (3,335-3,336 psi). |
Service capacities (summary)
| Fuel tank | 90 L (23.7-23.8 gal). |
| Hydraulic system | 52 L (13.7-13.8 gal) total system capacity. |
| Engine oil | 9-10 L (2.4-2.7 gal), varies by series. |
| Cooling system | 10-10.5 L (2.6-2.7 gal). |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
236B fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) - Cat 3044C DIT diesel | 10.0 L (2.65 US gal); refill reported 10.0-10.6 L (2.6-2.8 US gal) across sources | Cat DEO (Diesel Engine Oil) / Cat DEO-ULS on Tier 2 engines. SAE 15W-40 for temperate operation; drop to SAE 10W-30 for cold climates, full-synthetic 0W-40 or 5W-40 for arctic starts. Match grade to ambient range on the cold-weather viscosity chart. |
| Cooling system | 10.0-10.5 L (2.6-2.75 US gal) | Cat ELC (Extended Life Coolant), organic acid technology, factory fill rated to about -36 degC (-33 degF). Do not mix with conventional coolant. Add ELC Extender at half-life instead of a full coolant change. |
| Fuel tank | 90.0 L (23.8 US gal) | No. 2-D diesel meeting Cat fuel specification; ultra-low-sulfur diesel for the Tier 2 3044C DIT engine. No branded Cat fluid, just clean water-free ULSD. |
| Chain case / final drive, each side (oil-bath chain-and-sprocket drive) | 7.0 L (1.85 US gal) per side; both sides combined about 14.0 L (3.7 US gal) | Cat DEO diesel engine oil, same grade as the crankcase (SAE 15W-40 typical, 10W-30/5W-40 by climate). The chain case is an oil-bath chain drive, not a gear-type axle, so it does not take Cat TDTO. |
| Hydraulic system - reservoir/tank | 35.0 L (9.2 US gal) | Cat HYDO hydraulic oil. Grade by ambient temperature: Cat HYDO Advanced 10 (SAE 10W) for cold starts, heavier grades for warm climates. Check the OMM viscosity chart for the local range. |
| Hydraulic system - total (tank plus lines, valves, cylinders) | 52.0 L (13.7-13.8 US gal) | Same Cat HYDO fill as the reservoir; this figure is the full-system wetted volume, not just the tank. |
| Grease (spec only, not a sump fill) | Apply per lube-chart interval at each fitting | Cat Multipurpose Grease (Cat MPGM), NLGI 2, for lift-arm, cylinder, and pivot-pin fittings. Heavier-duty pins can use Cat Prime Application Grease. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 236B maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 6,000 h |
|
Servicing the 236B beyond the schedule
Predictive Maintenance & Fluid Analysis
Track wear through oil sampling rather than the calendar alone. Pull hydraulic and engine oil samples from the 3044C DIT diesel at the 250-hour service and watch for metal glitter in the hydraulic filter, an early sign of hydrostatic pump or drive-motor wear. Sample chain case oil at each 500-hour interval for water intrusion. Log coolant condition to catch electrolysis before it damages the radiator. Trend results across intervals instead of reacting to one bad reading.
Corrective & Common Repairs
Most 236B downtime traces to the fuel pump relay, the glow plug relay, and drive-chain stretch inside the chain case. The relay fails intermittently and cuts fuel delivery. Weak glow plug relay operation leaves the engine hard to start in cold weather. Chain stretch shows up as wheel slip or clunking on direction change. Slow or weak lift and tilt response usually points to a sticking pump swash plate or a worn hydrostatic drive motor rather than the cylinders. Check the filter for metal before condemning the pump.
Overhaul & Rebuild Points
High-hour 236B units wear at the hydrostatic drive pumps and motors, the chain case sprockets and roller chain, and the turbocharger on the 3044C DIT engine. Metal contamination in the hydraulic filter usually means both drive pumps and motors need teardown for inspection, not just a filter change. Chain case rebuilds call for checking sprocket tooth wear alongside chain stretch, not chain alone. Budget a turbo shaft-play check into any major engine overhaul on this platform before returning it to service.
Seasonal & Environment Servicing
Cold starts depend on the glow plug system staying tight; loose or corroded glow plug wiring is a leading no-start complaint on this platform. Switch to a winter-grade hydraulic fluid before temperatures drop to keep pump response crisp in cold weather. Hold coolant at the correct antifreeze concentration for the climate to protect the block and radiator. In dusty or high-debris seasons, clean the primary engine air filter and radiator fins more often than the standard interval to protect the turbo and cooling system.
236B common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 110-6326 | Filter Element As-Air | Air intake service | Check fitment → |
| 110-6331 | Filter Element As-Air | Air intake service | Check fitment → |
| 1G-8878 | Filter As-Oil | Hydraulic service | Check fitment → |
| 1R-0734 | Filter-Engine Oil | Lubrication service | Check fitment → |
| 134-0404 | Switch As-Pressure | Lubrication service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
236B fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| CID 1187 (Continuous Flow Switch) | The auxiliary-hydraulics electro-hydraulic control module does not see a valid signal from the continuous-flow rocker switch on the joystick. | Sticking or damaged rocker switch, chafed wiring inside the joystick harness, or a loose connector at the control module. | Cycle the switch by hand, inspect the joystick harness and connector pins for corrosion or breaks, check switch resistance, then clear the code and retest with the factory diagnostic tool. |
| CID 1190 (Armrest/Seat Switch) | The armrest (seat bar) or seat switch circuit is open, shorted, or reporting an implausible state, so the safety interlock will not allow travel or hydraulic function. | Seat bar not fully lowered, worn or failed seat/armrest switch, or a pinched and corroded harness wire under the seat pan. | Fully lower the armrest, clean and inspect the switch contacts, trace the harness routing under the seat for chafe points, and replace the switch if it fails a continuity check. |
| CID 1188 (Operator Interlock Override Switch) | Fault on the interlock override switch used by service personnel to bypass the seat-bar interlock; the control module reads an open circuit or an implausible switch state. | Faulty override switch, damaged wiring to the switch, or the switch left in an unexpected position after service work. | Verify switch position and continuity, inspect and repair the wiring, and replace the switch if it does not toggle cleanly. |
| CID 1195 (Hydraulic Filter Bypass Switch) | The hydraulic return-filter bypass switch has tripped or its circuit is faulty, meaning oil is bypassing filtration because the element is restricted. | Clogged hydraulic filter element, cold thick oil at cold startup, or a failed bypass switch. | Replace the hydraulic filter, allow the machine to warm up before heavy hydraulic work, and confirm the switch clears after the filter change. |
| CID 0070 (Parking Brake Switch) | The machine control module lost a valid signal from the parking brake switch circuit — reads as an open circuit or a shorted/grounded circuit depending on the fault. | Broken wire or corroded connector at the park brake switch, or a failed switch on the operator console. | Check switch continuity and the connector at the park brake switch, repair or replace wiring or the switch, then verify brake release with the diagnostic tool. |
| CID 0100 (Engine Oil Pressure) | Oil pressure sensor/switch signal is out of range or oil pressure has dropped below the safe threshold, triggering the oil-pressure warning lamp and audible alarm, sometimes with an automatic engine shutdown. | Low oil level, worn oil pump, clogged oil filter, or a failed pressure switch/sensor or its wiring. | Shut the engine down immediately, check oil level and filter condition, and test the switch/sensor circuit before restarting. |
| CID 0110 (Engine Coolant Temperature) | Coolant temperature sensor circuit fault, or coolant temperature above the normal operating range, triggering the temperature warning lamp and a power derate. | Low coolant level, blocked radiator fins or screen, a stuck thermostat, or a faulty coolant temperature sensor or its wiring. | Let the engine cool, check coolant level and clean the radiator screen, inspect sensor wiring, then confirm with the diagnostic tool. |
| CID 1182/1183 (High Flow Solenoid #1/#2) | On high-flow-equipped units, the control module detects an open or shorted circuit on one of the high-flow auxiliary solenoid valve coils, disabling high-flow output. | Failed solenoid coil, damaged connector, or chafed wiring near the loader arm/boom. | Check solenoid coil resistance, inspect wiring along the boom for wear points, and replace the solenoid or repair the harness as needed. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
236B attachments & work tools
Series and engine identification
Series 2 236B uses the Cat 3044C DIT diesel (Tier 2 compliant); the later Series 3 236B uses the Cat C3.4 DIT diesel (Tier 4 Interim/Stage IIIA compliant). Both series share the same loader hydraulic circuit and quick-coupler interface, so work tool selection does not change with the engine update.
General purpose and utility buckets
Standard dirt/general-purpose buckets for this size class run roughly 1.5 to 1.7 m (60 to 66 in) wide with heaped capacity around 0.36 to 0.44 m3 (0.47 to 0.57 cu yd), sized to the machine's rated operating capacity of 884 kg (1,950 lb), or 929 kg (2,050 lb) with the factory counterweight. Utility, low-profile, and light-material bucket profiles are offered for lower-density or space-restricted work.
Multi-purpose and grapple buckets
Multi-purpose (clamshell-style) buckets and industrial or utility grapple buckets are offered in this frame size for clamping, back-dragging, and handling brush or irregular debris. The clam or grapple jaw runs off the machine's standard auxiliary hydraulic circuit.
Pallet forks
Fork and carriage work tools use a notched rail-type carriage that lets tines be respaced or swapped, with a load backrest for operator protection. Forks in this frame class are Class II rated and offered in multiple tine lengths for palletized loads, bagged material, and similar unit loads within the machine's rated operating capacity.
Augers
Compact auger work tools drill post and footing holes for fencing, signage, and small tree or shrub planting. Bit diameter and torque vary by auger model and are matched to the loader's standard auxiliary hydraulic flow.
Blades
Angle blade and dozer blade attachments are offered in roughly 1.8 to 2.1 m (72 to 84 in) widths with about 0.6 m (24 in) moldboard height, for light grading, backfilling, and site cleanup.
Brooms
Pickup and utility broom attachments with roughly 1.8 m (72 in) sweep width and a collection hopper are offered for debris and loose-material cleanup, powered by the machine's auxiliary hydraulic circuit.
Backhoe attachment
A compact backhoe work tool is offered for this loader class, converting the machine into a rear digger. It mounts through the same quick-coupler interface and runs off the standard auxiliary hydraulic circuit.
Cold planer and trencher
Compact cold planer and chain trencher work tools are offered for this frame size, for asphalt or surface milling and utility-line trenching respectively. Both are higher hydraulic-demand tools and should be checked against the machine's standard auxiliary flow rating before use.
Snow and landscape tools
Snow blowers, snow pushers, landscape rakes, tillers, stump grinders, and wheel saws round out the work tool line for this frame size, each sized to run within the loader's standard auxiliary hydraulic flow.
Quick coupler and mounting
A quick coupler is mandatory factory equipment, offered as manual (two-lever, chrome-plated wedge pins) or hydraulic (cab rocker-switch actuated, no need to leave the seat). The coupler face and heavy-duty flat-faced hydraulic quick disconnects are common across the Cat B-series skid steer line in this size range, so work tools sized for siblings in the range generally interchange.
Auxiliary hydraulic circuit
Standard auxiliary hydraulics run continuous flow at about 83 L/min (22 gal/min) and 23 000 kPa (3,335 psi), through heavy-duty flat-faced quick disconnects routed along the left lift arm by a split D-ring hose guide. No separate high-flow package is documented for this frame size; work tools in the line are sized to the standard flow rating.
Control package and work tool harness
A control package is selected at order: basic on/off auxiliary hydraulics, or proportional deluxe hydraulics in 1-speed or 2-speed form. The later series adds control packages that bundle a work tool electrical harness for attachments needing cab-controlled electrical function alongside hydraulic flow.
Counterweight and guarding options
A factory rear counterweight is optional, raising rated operating capacity by 45 kg (100 lb) for use with heavier forks or grapples near the tipping-load limit. FOPS Level II and an enclosed cab with debris barrier are optional for added overhead and frontal protection when running aggressive or debris-generating work tools.
All 236B assemblies by section
Every catalogued assembly group for the Caterpillar 236B. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
243-0405 Air Cleaner Gp
| 11***26 | Filter Element As-Air; (Primary) | 1 |
| 11***31 | Filter Element As-Air; (Secondary) | 1 |
| 11***17 | Valve-Dust; (Air Cleaner) | 1 |
222-9812 Air Cleaner Gp
| 22***12 | Air Cleaner Group | 1 |
| 24***05 | Air Cleaner Group | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 2 |
272-3062 Kit-Debris Guard -Turbocharger, Exhaust Manifold
| 27***52 | Guard-Exhaust; (Manifold) | 1 |
| 27***62 | Kit-Debris Guard; -Turbocharger, Exhaust Manifold | 1 |
| 28***55 | Guard As-Exhaust; (Turbocharger) | 1 |
218-0945 Lines Gp-Air
| 21***57 | Clamp | 1 |
| 21***45 | Lines Group-Air | 1 |
| 22***18 | Hose As | 1 |
247-6317 Lines Gp-Air
| 24***17 | Lines Group-Air | 1 |
| 5I***78 | Gasket | 1 |
| 5I***21 | Elbow Assem. | 1 |
235-5893 Manifold Gp-Exhaust
| 23***60 | Bolt | 8 |
| 23***23 | Manifold | 1 |
| 23***24 | Gasket-Manifold | 1 |
287-5323 Manifold Gp-Exhaust
| 19***60 | Nut; (M8x1.25-Thd) | 8 |
| 23***60 | Bolt | 8 |
| 23***24 | Gasket-Manifold | 1 |
287-4832 Manifold Gp-Inlet
| 09***49 | Bolt; (M8x1.25x40-mm) | 12 |
| 23***05 | Manifold-Inlet | 1 |
| 23***06 | Gasket; (Inlet Manifold) | 1 |
235-5892 Manifold Gp-Inlet
| 23***05 | Manifold-Inlet | 1 |
| 23***06 | Gasket; (Inlet Manifold) | 1 |
| 23***92 | Manifold Group-Inlet | 1 |
261-8044 Muffler & Converter
| 26***44 | Muffler & Converter | 1 |
222-9815 Muffler & Mounting Gp
| 19***76 | Washer-Hard; (8.8x20x8-mm Thk) | 3 |
| 22***15 | Muffler & Mounting Group | 1 |
| 22***16 | Muffler As; (Standard) | 1 |
272-3051 Muffler Gp
| 19***76 | Washer-Hard; (8.8x20x8-mm Thk) | 3 |
| 23***21 | Nut; (M10x1.25-Thd) | 1 |
| 27***50 | Muffler As | 1 |
235-5894 Turbocharger Gp
| 09***00 | Washer; (1.5mm Thk) | 3 |
| 19***06 | Gasket | 4 |
| 23***18 | Gasket | 1 |
Basic Engine
292-4041 Bearing Gp-Main
| 10***88 | Plate-Thrust; (Standard) | 3 |
| 10***89 | Plate-Thrust; (0.15-mm Os) | 0 |
| 10***90 | Plate-Thrust; (0.35-mm Os) | 0 |
233-5473 Camshaft Gp
| 09***28 | Key | 1 |
| 10***72 | Tappet | 8 |
| 10***73 | Rod-Push | 8 |
287-4033 Connecting Rod Gp
| 10***80 | Rod As-Connecting | 4 |
| 12***55 | Bolt-Connecting Rod | 2 |
| 12***56 | Nut | 2 |
233-5480 Cover Gp-Valve Mechanism
| 23***80 | Cover Group-Valve Mechanism | 1 |
| 23***83 | Gasket; (Valve Cover) | 1 |
| 31***98 | Cap-Oil Filler; (Engine) | 1 |
287-4649 Crankshaft Gp
| 08***13 | Pin | 2 |
| 09***28 | Key | 2 |
| 13***96 | Nut | 1 |
234-4793 Crankshaft Gp
| 08***13 | Pin | 2 |
| 09***28 | Key | 2 |
| 13***96 | Nut | 1 |
235-5883 Cylinder Block Gp
| 09***41 | Cap | 6 |
| 09***20 | Pin | 2 |
| 10***62 | Bushing | 1 |
287-2416 Cylinder Block Gp
| 09***41 | Cap | 4 |
| 09***20 | Pin | 2 |
| 10***62 | Bushing | 1 |
233-5500 Cylinder Head Gp
| 21***75 | Cap | 7 |
| 23***53 | Cylinder Head | 1 |
| 23***54 | Bolt; (M12x1.75x115-mm) | 17 |
218-4836 Drain Gp-Engine Oil -Fluid Sampling Valve
| 11***70 | Cap | 1 |
| 1P***78 | Clamp; (Hose) | 1 |
| 21***19 | Adapter | 1 |
235-5890 Flywheel Gp
| 03***39 | Gear-Starter; (112-Teeth) | 1 |
| 22***93 | Bolt; (M12x1.25x30-mm) | 4 |
| 23***91 | Flywheel As | 1 |
235-5891 Gear Gp-Front
| 11***27 | Gear; (46-Teeth) | 1 |
| 11***83 | Gear As-Idler; (49-Teeth) | 1 |
| 11***85 | Gear-Pump; (Oil, 31-Teeth) | 1 |
287-4830 Gear Gp-Front
| 11***27 | Gear; (46-Teeth) | 1 |
| 11***29 | Gear; (23-Teeth) | 1 |
| 11***83 | Gear As-Idler; (49-Teeth) | 1 |
218-0940 Guard Gp-Belt
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 3 |
| 13***22 | Bolt-Locking; (M8x1.25x16-mm) | 2 |
| 21***21 | Guard-Belt | 1 |
280-8297 Guard Gp-Belt
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 3 |
| 21***21 | Guard-Belt | 1 |
| 22***87 | Bracket As | 1 |
287-3357 Housing Gp-Flywheel
| 09***15 | Lockwasher | 2 |
| 10***80 | Gasket-Rear | 1 |
| 11***15 | Seal As-Oil | 1 |
235-5886 Housing Gp-Flywheel
| 10***80 | Gasket-Rear | 1 |
| 11***15 | Seal As-Oil | 1 |
| 14***17 | Bolt; (M10x1.25x25-mm) | 10 |
287-3074 Housing Gp-Front
| 09***29 | Seal-O-Ring (Id=139.5mm); (Id=139.50mm) | 1 |
| 10***77 | Gasket-Front Plate | 1 |
| 11***47 | Gasket; (Gear Case) | 1 |
235-5885 Housing Gp-Front
| 09***29 | Seal-O-Ring (Id=139.5mm); (Id=139.50mm) | 1 |
| 11***47 | Gasket; (Gear Case) | 1 |
| 11***48 | Plate | 1 |
287-1844 Lifting Gp-Engine
| 19***05 | Bolt As | 4 |
| 23***66 | Eye | 1 |
| 23***68 | Gasket; (Rear Head) | 1 |
238-8276 Lifting Gp-Engine
| 23***66 | Eye | 1 |
| 23***82 | Eye | 1 |
| 23***76 | Lifting Group-Engine | 1 |
218-0923 Mounting Gp-Engine
| 12***80 | Locknut; (M12x1.75-Thd) | 1 |
| 16***95 | Washer; (16.5x71.5x3-mm Thk) | 4 |
| 21***17 | Bracket As | 1 |
287-3921 Pan Gp-Oil
| 16***01 | Sealant-Silicone | 0 |
| 19***03 | Bolt As | 1 |
| 23***11 | Washer | 1 |
300-9450 Pan Gp-Oil
| 09***82 | Gasket, Oil Drain | 1 |
| 13***32 | Plug; (Drain, Engine Oil) | 1 |
| 19***03 | Bolt As | 1 |
235-5889 Piston Gp
| 22***04 | Set-Piston Ring; (Standard) | 4 |
| 23***14 | Piston; (Standard) | 4 |
| 23***15 | Pin-Piston | 4 |
287-2983 Plug Gp-Engine
| 19***11 | Plug | 1 |
| 28***83 | Plug Group-Engine; -Cylinder Block, Rh | 1 |
287-2922 Plug Gp-Engine
| 28***22 | Plug Group-Engine; -Cylinder Block, Lh | 1 |
| 5I***05 | Plug | 6 |
241-6015 Pulley Gp-Crankshaft
| 23***86 | Pulley-Crankshaft | 1 |
| 24***15 | Pulley Group-Crankshaft | 1 |
287-6114 Pulley Gp-Water Pump
| 23***07 | Pulley | 1 |
| 28***14 | Pulley Group-Water Pump | 1 |
| 8T***42 | Bolt; (M8x1.25x14-mm) | 4 |
239-0686 Pulley Gp-Water Pump
| 23***07 | Pulley | 1 |
| 23***72 | V-Belt; (Water Pump) | 1 |
| 23***86 | Pulley Group-Water Pump | 1 |
287-6138 V-Belt Gp
| 28***38 | V-Belt Group; -Water Pump | 1 |
| 35***69 | V-Belt; (Water Pump) | 1 |
235-5880 Valve Mechanism Gp
| 09***05 | Cap | 1 |
| 19***24 | Ring-Snap | 2 |
| 22***45 | Rocker As | 8 |
Cooling System
235-5896 Cooler Gp-Engine Oil
| 09***13 | Seal-O-Ring | 4 |
| 09***21 | Plug | 2 |
| 19***22 | Bolt As; (M8x1.25x22-mm) | 11 |
292-4040 Drain Gp-Coolant
| 23***78 | Valve As-Drain | 1 |
| 29***40 | Drain Group-Coolant | 1 |
235-5900 Lines Gp-Water
| 09***75 | Bolt; (25-mm Long) | 2 |
| 23***31 | Cover | 1 |
| 23***59 | Gasket; (Water Temperature Regulator) | 1 |
218-0938 Mounting Gp-Rad & Oil Cooler
| 14***32 | Pin As | 1 |
| 17***55 | Pin | 2 |
| 19***45 | Spring-Gas; (Grill) | 1 |
335-9117 Pump Gp-Water
| 10***47 | Cover-Pump | 1 |
| 19***60 | Plug | 1 |
| 33***17 | Pump Group-Water | 1 |
235-5899 Pump Gp-Water
| 10***47 | Cover-Pump | 1 |
| 10***50 | Gasket-Cover; (Water Pump) | 1 |
| 23***32 | Flange | 1 |
287-6056 Pump Gp-Water
| 28***66 | Bolt; (M8x1.25x65-mm) | 1 |
| 28***56 | Pump Group-Water | 1 |
| 33***17 | Pump Group-Water | 1 |
221-9124 Radiator & Hyd Oil Cooler Gp
| 03***65 | Cap As-Radiator; (Sea Water Heat Exchanger) | 1 |
| 06***80 | Fitting | 1 |
| 20***27 | Fan As | 1 |
261-6219 Radiator & Hyd Oil Cooler Gp
| 03***65 | Cap As-Radiator; (Sea Water Heat Exchanger) | 1 |
| 06***80 | Fitting | 1 |
| 20***27 | Fan As | 1 |
261-6218 Radiator & Oil Cooler Mtg Gp
| 10***86 | Sleeve | 1 |
| 16***15 | Cap-Vented; (Coolant Recovery Tank) | 1 |
| 1P***78 | Clamp; (Hose) | 2 |
218-0924 Radiator & Oil Cooler Mtg Gp
| 13***40 | Locknut; (M8x1.25-Thd) | 2 |
| 16***15 | Cap-Vented; (Coolant Recovery Tank) | 1 |
| 1P***78 | Clamp; (Hose) | 2 |
Electrical And Starting System
3e-7584 Lamp Gp-Head & Signal
| 10***46 | Lamp; (12-Volt, 4-Watt)(Miniature) | 1 |
| 10***47 | Body As-Lamp | 1 |
| 10***48 | Lens As; (Headlight)(High, Low Beam) | 1 |
287-6361 Alternator Gp-Charging
| 10***14 | Alternator Group-Charging | 1 |
| 23***62 | Plate | 1 |
| 23***73 | Bolt; (M10x1.5x90-mm) | 1 |
105-2814 Alternator Gp-Charging
| 10***14 | Alternator Group-Charging | 1 |
| 11***58 | Pulley-Alternator | 1 |
| 11***59 | Frame As-Alternator | 1 |
235-5905 Alternator Gp-Charging
| 23***62 | Plate | 1 |
| 23***73 | Bolt; (M10x1.5x90-mm) | 1 |
| 23***05 | Alternator Group-Charging | 1 |
225-7952 Battery Gp -Heavy Duty
| 19***29 | Clamp | 1 |
| 22***52 | Battery Group; -Heavy-Duty | 1 |
| 23***68 | Battery | 1 |
225-7950 Battery Gp -Standard
| 15***56 | Battery; (12-Volt, Maintenance Free)(24 V) | 1 |
| 19***29 | Clamp | 1 |
| 22***50 | Battery Group; -Standard | 1 |
154-4233 Control Gp-Interlock
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 15***33 | Control Group-Interlock | 1 |
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
218-5780 Conversion Ar-Non-Roading -Nacd
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 21***80 | Conversion Ar-Non-Roading; -Nacd | 1 |
| 21***90 | Panel Ar-Instrument; -Nacd | 1 |
216-4755 Cover Gp-Fuse Panel
| 10***43 | Seal; (32-cm Each) | 0 |
| 11***71 | Puller-Minifuse | 1 |
| 16***65 | Retainer | 2 |
225-8000 Electronics Gp-Implement -Work Tool
| 12***97 | Screw-Pan Head; (No 8-32x0.375-In) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 21***58 | Control Group-Unprogrammed | 1 |
207-5262 Electronics Gp-Machine -Security
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 15***55 | Control Group-Unprogrammed; -Machine Security System | 1 |
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
216-4750 Fastener Gp-Wiring Harness
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 4 |
| 19***36 | Insert-Threaded; (M6x1-Thd) | 4 |
| 19***07 | Screw-Truss Head; (M6x1x35-mm) | 4 |
235-5904 Glow Plug Gp
| 10***59 | Glow Plug | 4 |
| 23***04 | Glow Plug Group | 1 |
| 25***90 | Plate-Connection | 1 |
218-0942 Heater Gp-Jacket Water
| 21***42 | Heater Group-Jacket Water | 1 |
| 22***41 | Element As-Jacket Water Heater; (120-Volt, 530-Watt) | 1 |
| 22***42 | Heater Group-Jacket Water | 1 |
218-0943 Heater Gp-Jacket Water
| 13***17 | Cap As-Dust | 1 |
| 21***12 | Cord As | 1 |
| 21***43 | Heater Group-Jacket Water | 1 |
225-7991 Installation Gp-Security -Machine Security System
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
239-5010 Installation Gp-Security -Kit
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
233-5706 Kit-Work Tool Control & Wiring -Radial Lift
| 09***33 | Screw-Machine; (M4x0.7x40-mm) | 2 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
233-5638 Kit-Work Tool Control & Wiring -Vertical Lift
| 09***33 | Screw-Machine; (M4x0.7x40-mm) | 2 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
218-6742 Kit-Work Tool Wiring -Vertical Lift
| 09***33 | Screw-Machine; (M4x0.7x40-mm) | 2 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***60 | Strap | 1 |
218-6741 Kit-Work Tool Wiring -Radial Lift
| 09***33 | Screw-Machine; (M4x0.7x40-mm) | 2 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
234-4328 Lamp Gp-Flood -Front
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 20***14 | Lens As; (Floodlight) | 1 |
| 23***28 | Lamp Group-Flood; -Front, Rear, Wide Range | 1 |
234-7727 Lamp Gp-Flood -Rear
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 20***11 | Lens As | 1 |
| 23***27 | Lamp Group-Flood; -Rear | 1 |
142-7503 Lamp Gp-Stop & Tail
| 08***48 | Lamp; (12-Volt, 5-Watt) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 14***03 | Lamp Group-Stop & Tail; -12-Volt | 1 |
142-8634 Lamp Gp-Stop & Tail
| 08***48 | Lamp; (12-Volt, 5-Watt) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 14***34 | Lamp Group-Stop & Tail; -Stop, Tail | 1 |
340-7721 Lamp Gp-Stop & Tail -Rear Door
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***34 | Lamp Group-Stop & Tail; -Stop, Tail | 2 |
| 14***31 | Switch As-Rocker; (Hazard Warning Lights) | 1 |
128-6985 Lamp Gp-Warning Beacon -Amber, Magnetic Mount, Rotating
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 9R***42 | Plug As | 1 |
| 9R***58 | Cord As | 1 |
309-1325 Lamp Gp-Warning Beacon -Amber
| 27***00 | Lens; (Amber)(Warning Beacon) | 1 |
| 30***25 | Lamp Group-Warning Beacon; -12-Volt, Amber | 1 |
| 9R***42 | Plug As | 1 |
218-6425 Lighting Gp-Flood -Front
| 21***25 | Lighting Group-Flood; -Front | 1 |
| 23***28 | Lamp Group-Flood; -Front, Rear, Wide Range | 2 |
| 5P***39 | Grommet | 2 |
216-4746 Lighting Gp-Flood -Rear
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***26 | Switch As-Rocker; (Rear Working Lamp) | 1 |
| 19***37 | Insert-Threaded; (M8x1.25-Thd) | 2 |
216-4716 Lighting Gp-Roading
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
216-4715 Lighting Gp-Roading
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
142-8652 Lighting Gp-Stop & Tail
| 14***03 | Lamp Group-Stop & Tail; -12-Volt | 2 |
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
142-8653 Lighting Gp-Warning Beacon
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 14***53 | Lighting Group-Warning Beacon; -12-Volt | 1 |
238-8277 Sensor Gp-Temp & Press -Engine
| 23***74 | Switch-Temperature; (Engine Coolant, Cold Start) | 1 |
| 23***77 | Sensor Group-Temp & Press; -Engine | 1 |
| 32***52 | Switch-Oil Press; (Engine) | 1 |
130-9811 Sensor Gp-Temperature
| 13***11 | Sensor Group-Temperature; (Transmission Lubrication Oil) | 1 |
| 13***45 | Pad; (Connector) | 1 |
235-5903 Starting Motor Gp-Electric -12-Volt
| 23***63 | Starting Motor Group-Electric | 1 |
| 23***03 | Starting Motor Group-Electric; -12-Volt | 1 |
143-0539 Starting Motor Gp-Electric
| 10***85 | Cap-Starting Motor | 1 |
| 10***12 | Kit-Contact; (Starting Motor) | 1 |
| 10***13 | Switch As; (Starting Motor)(12-Volt) | 1 |
287-6181 Starting Motor Gp-Electric
| 14***39 | Starting Motor Group-Electric; -12-Volt | 1 |
| 28***81 | Starting Motor Group-Electric | 1 |
184-1564 Switch Gp-Pressure -Brake Light
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***64 | Switch Group-Pressure; -Brake Light | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
225-7969 Warning Gp-Backup
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***39 | Alarm As | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
225-7948 Wiring Gp-Air Conditioner
| 10***74 | Seal-Connector | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
216-4700 Wiring Gp-Chassis
| 09***34 | Spacer; (9x20x10-mm Thk) | 3 |
| 09***33 | Screw-Machine; (M4x0.7x40-mm) | 2 |
| 10***20 | Plug As-Connector; (2-Pin) | 1 |
216-4720 Wiring Gp-Engine
| 09***34 | Spacer; (9x20x10-mm Thk) | 3 |
| 10***20 | Plug As-Connector; (2-Pin) | 1 |
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 4 |
230-3743 Wiring Gp-Horn -With Mounting
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 2 |
| 12***68 | Socket-Connector; (14-Ga) | 2 |
272-1625 Wiring Gp-Machine -Demand Fan
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
225-7964 Wiring Gp-Rear Lighting
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***15 | Relay As; (12-Volt)(Junction Box) | 1 |
216-4724 Wiring Gp-Work Tool -Vertical Lift
| 09***33 | Screw-Machine; (M4x0.7x40-mm) | 2 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***60 | Strap | 1 |
225-7960 Wiring Gp-Work Tool -Radial Lift
| 09***33 | Screw-Machine; (M4x0.7x40-mm) | 2 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
Engine Arrangement
218-6850 Engine Ar
| 17***54 | Engine Ar-Primary | 1 |
| 21***50 | Engine Ar | 1 |
218-6650 Engine Ar
| 17***53 | Engine Ar-Primary | 1 |
| 21***50 | Engine Ar, Tyre/Tire; 405/70r20em155a2143bspt9 Dunl, Replaces 422682a1 | 1 |
179-1854 Engine Ar-Primary
| 17***54 | Engine Ar-Primary | 1 |
| 23***73 | Camshaft Group | 1 |
| 23***80 | Cover Group-Valve Mechanism | 1 |
179-1853 Engine Ar-Primary
| 17***53 | Engine Ar-Primary | 1 |
| 23***73 | Camshaft Group | 1 |
| 23***80 | Cover Group-Valve Mechanism | 1 |
278-1238 Installation Ar-Engine
| 21***20 | Wiring Group-Engine | 1 |
| 21***23 | Mounting Group-Engine | 1 |
| 21***38 | Mounting Group-Rad & Oil Cooler | 1 |
218-0914 Installation Ar-Engine
| 21***20 | Wiring Group-Engine | 1 |
| 21***14 | Installation Ar-Engine | 1 |
| 21***23 | Mounting Group-Engine | 1 |
Frame And Body
218-5660 Bumper Gp -Rear
| 14***21 | Stud | 2 |
| 15***06 | Boss | 2 |
| 21***60 | Bumper Group; -Rear | 1 |
218-5781 Conversion Ar-Roading -Outside Nacd
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 21***46 | Box Group-Storage | 1 |
| 21***81 | Conversion Ar-Roading; -Outside Nacd | 1 |
218-5784 Conversion Ar-Roading -Outside Nacd
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 19***84 | Film Group; -Clearance | 1 |
| 21***46 | Box Group-Storage | 1 |
238-7608 Conversion Ar-Roading -Outside Nacd
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 18***47 | Lifting Group-Machine; -4-Point | 1 |
| 19***84 | Film Group; -Clearance | 1 |
236-5112 Conversion Ar-Roading -Germany
| 17***22 | Visor Group-Cab | 1 |
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
251-1510 Conversion Ar-Roading -Germany
| 11***58 | Film-Identification; (20-Km/H) | 3 |
| 17***22 | Visor Group-Cab | 1 |
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
236-5116 Conversion Ar-Roading -Germany
| 17***22 | Visor Group-Cab | 1 |
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
238-7607 Conversion Ar-Roading -Outside Nacd
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 18***47 | Lifting Group-Machine; -4-Point | 1 |
| 21***46 | Box Group-Storage | 1 |
236-5113 Conversion Ar-Roading -Italy
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 18***47 | Lifting Group-Machine; -4-Point | 1 |
236-5117 Conversion Ar-Roading -Italy
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 21***15 | Lighting Group-Roading | 1 |
251-1512 Conversion Ar-Roading -Germany
| 11***58 | Film-Identification; (20-Km/H) | 3 |
| 17***22 | Visor Group-Cab | 1 |
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
278-1293 Conversion Gp-Roading -Italy
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 12***54 | Fastener; (Loop) (22cm) (X3) | 0 |
| 12***55 | Fastener-Hook; (18-cm Each) | 0 |
278-1292 Conversion Gp-Roading -Germany
| 11***34 | Film-Warning; (Steering) | 1 |
| 17***15 | Bracket As | 1 |
| 17***16 | Chock | 1 |
234-0792 Conversion Gp-Roading -Germany
| 11***34 | Film-Warning; (Steering) | 1 |
| 15***42 | Plate-Information; (Maximum Weight) | 1 |
| 16***89 | Tack-Fastener | 4 |
234-0793 Conversion Gp-Roading -Italy
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 12***54 | Fastener; (Loop) (22cm) (X3) | 0 |
| 12***55 | Fastener-Hook; (18-cm Each) | 0 |
218-6016 Counterweight Gp
| 21***16 | Counterweight Group | 1 |
| 21***17 | Plate | 4 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 12 |
185-9941 Counterweight Gp -Kit
| 18***31 | Block; (16.90 Kg) | 2 |
| 18***33 | Block; (33.99 Kg)(Lh) | 1 |
| 18***34 | Block; (33.99 Kg)(Rh) | 1 |
218-6018 Counterweight Gp
| 21***17 | Plate | 4 |
| 21***18 | Counterweight Group | 1 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 12 |
220-8135 Counterweight Gp -Kit
| 22***35 | Counterweight Group; -Kit | 1 |
| 22***36 | Plate | 1 |
| 22***37 | Plate | 1 |
154-4050 Counterweight Gp
| 15***50 | Counterweight Group | 1 |
| 17***80 | Block | 14 |
| 7X***90 | Washer-Hard; (13.5x44.5x6-mm Thk) | 2 |
183-7132 Counterweight Gp
| 18***31 | Block; (16.90 Kg) | 2 |
| 18***32 | Counterweight Group | 1 |
| 18***33 | Block; (33.99 Kg)(Lh) | 1 |
218-5803 Enclosure Gp-Engine
| 11***85 | Bumper | 2 |
| 13***40 | Locknut; (M8x1.25-Thd) | 3 |
| 14***01 | Hood As | 1 |
218-5875 Frame & Mtg Gp-Machine
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***10 | Plate As | 1 |
| 14***23 | Gasket | 2 |
218-5675 Frame & Mtg Gp-Machine
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***10 | Plate As | 1 |
| 14***23 | Gasket | 2 |
218-5873 Frame As-Lower
| 21***73 | Frame As-Lower | 1 |
261-6203 Frame As-Upper
| 26***03 | Frame As-Upper | 1 |
218-6562 Frame Gp-Machine
| 19***94 | Link As | 1 |
| 21***73 | Frame As-Lower | 1 |
| 21***98 | Arm As-Lift | 1 |
218-6546 Frame Gp-Machine
| 21***73 | Frame As-Lower | 1 |
| 21***98 | Arm As-Lift | 1 |
| 21***46 | Frame Group-Machine | 1 |
150-8621 Guide Gp-Lines
| 15***21 | Guide Group-Lines | 1 |
| 22***15 | Plate As | 1 |
| 24***77 | Bolt; (M8x1.25x12-mm) | 1 |
264-5864 Kit-Engine Enclosure Seal -Debris Barrier
| 12***43 | Seal; (70-cm) | 0 |
| 26***54 | Baffle | 1 |
| 26***55 | Baffle | 1 |
340-7722 Kit-Roading Conversion -Italy, Lights, Switches
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
277-0654 Kit-Roading Conversion
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
340-7725 Kit-Roading Conversion -Italy, Lights, Mirrors
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
340-7724 Kit-Roading Conversion -Germany
| 11***34 | Film-Warning; (Steering) | 1 |
| 11***58 | Film-Identification; (20-Km/H) | 3 |
| 16***62 | Plate As | 1 |
277-0655 Kit-Roading Conversion -Lights, Mirrors
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
233-5991 Lifting Gp-Machine -4-Point
| 14***26 | Plate-Lift | 4 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 8 |
| 23***92 | Plate As | 1 |
233-5990 Lifting Gp-Machine -Single Point
| 09***25 | Pin-Clevis | 1 |
| 15***54 | Bracket As-Lift | 1 |
| 15***56 | Plate | 4 |
188-0147 Lifting Gp-Machine -4-Point
| 14***26 | Plate-Lift | 4 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 8 |
| 18***47 | Lifting Group-Machine; -4-Point | 1 |
218-5969 Lifting Gp-Machine -Single Point
| 09***25 | Pin-Clevis | 1 |
| 15***54 | Bracket As-Lift | 1 |
| 15***56 | Plate | 4 |
190-7994 Link As
| 19***94 | Link As | 1 |
| 6K***99 | Bearing-Sleeve | 4 |
236-5058 Mirror & Mtg Gp-Rear View -With Roading Light Mount
| 13***66 | Mirror Group-Rear View | 2 |
| 14***71 | Clamp; (Top)(Top) | 1 |
| 14***72 | Clamp; (Bottom)(Bottom) | 1 |
236-5059 Mirror & Mtg Gp-Rear View -With Roading Light Mount
| 13***66 | Mirror Group-Rear View | 2 |
| 14***71 | Clamp; (Top)(Top) | 1 |
| 14***72 | Clamp; (Bottom)(Bottom) | 1 |
225-7963 Mounting Gp-Registration
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 4 |
173-3021 Mounting Gp-Registration -With Wiring & Lights
| 17***21 | Mounting Group-Registration; -With Wiring & Lights | 1 |
| 17***36 | Plate | 1 |
| 19***62 | Lamp Group-Registration Plate | 1 |
175-4228 Mounting Gp-Roading Lights -Rear
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 4 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
233-5615 Suppression Gp-Sound -Hood
| 17***79 | Insulation | 2 |
| 23***15 | Suppression Group-Sound; -Hood | 1 |
| 23***47 | Insulation | 1 |
257-7400 Suppression Gp-Sound -Engine
| 01***80 | Lockwasher | 6 |
| 24***59 | Cover-Insulation | 1 |
| 24***60 | Cover-Insulation | 1 |
261-6384 Suppression Gp-Sound -Machine
| 17***79 | Insulation | 6 |
| 26***71 | Insulation | 2 |
| 26***72 | Insulation | 1 |
278-1279 Suppression Gp-Sound -Belt Guard
| 27***79 | Suppression Group-Sound; -Belt Guard | 1 |
| 28***97 | Guard Group-Belt | 1 |
Fuel System
218-5566 Cable Gp-Governor Control
| 21***66 | Cable Group-Governor Control | 1 |
| 25***77 | Pin As-Spring | 1 |
| 28***70 | End-Yoke Rod | 1 |
218-5602 Control Gp-Governor
| 21***65 | Pedal Group-Governor; -Includes Lever | 1 |
| 21***02 | Control Group-Governor | 1 |
| 23***96 | Screw-Flat Head; (M6x1x35-mm) | 4 |
235-5901 Lines Gp-Fuel Injection
| 09***35 | Cap | 1 |
| 09***90 | Shim (1.800mm Thick) | 0 |
| 09***94 | Shim (0.700mm Thick) | 0 |
218-0929 Lines Gp-Fuel Prm & Filter
| 06***80 | Fitting | 1 |
| 14***28 | Cap As-Filler; (Fuel) | 1 |
| 14***28 | Elbow | 1 |
218-0930 Lines Gp-Fuel Prm & Filter
| 06***80 | Fitting | 1 |
| 14***28 | Cap As-Filler; (Fuel) | 1 |
| 14***28 | Elbow | 1 |
235-5902 Pump Gp-Fuel Injection
| 14***17 | Bolt; (M10x1.25x25-mm) | 1 |
| 19***54 | Bolt; (M10x1.25x25-mm) | 1 |
| 21***10 | Nut | 1 |
249-7347 Pump Gp-Fuel Injection
| 21***10 | Nut | 1 |
| 23***35 | Stud | 1 |
| 23***36 | Bracket | 1 |
232-5877 Pump Gp-Fuel Prm & Prim Filter -Water Separator
| 11***01 | Bowl As-Water Collection | 1 |
| 11***18 | Ring-Retaining | 1 |
| 12***14 | Kit-Seal; (Water Separator) | 1 |
Hydraulic System
193-0447 Accumulator & Mtg Gp-Hydraulic -Work Tool
| 14***86 | Accumulator Group-Hydraulic; -Charged | 1 |
| 19***47 | Accumulator & Mtg Group-Hydraulic; -Work Tool | 1 |
| 19***31 | Elbow; (45-Deg) | 1 |
227-8807 Accumulator Gp-Hydraulic -Uncharged
| 22***07 | Accumulator Group-Hydraulic; -Uncharged | 1 |
149-0686 Accumulator Gp-Hydraulic -Charged
| 14***86 | Accumulator Group-Hydraulic; -Charged | 1 |
179-7001 Adapter Gp-Oil Line -Pilot
| 17***01 | Adapter Group-Oil Line; -Unit Injector Pump | 1 |
| 17***02 | Adapter Assem. | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
231-5274 Cylinder & Mtg Gp-Angle Blade
| 23***04 | Cylinder Group-Hydraulic; (Angle) | 2 |
| 23***05 | Cylinder Group-Hydraulic; (Tilt) | 1 |
| 23***66 | Pin As | 6 |
230-5406 Cylinder & Mtg Gp-Angle Blade
| 06***43 | Ring-Snap | 1 |
| 21***55 | Pin As | 1 |
| 21***43 | Bushing | 1 |
218-5899 Cylinder & Mtg Gp-Lift Arm
| 08***97 | Washer; (13x50x6-mm Thk) | 2 |
| 11***37 | Washer; (46x70x1-mm Thk)(1mm`Thk) | 12 |
| 14***32 | Pin As | 2 |
218-5799 Cylinder & Mtg Gp-Lift Arm
| 14***32 | Pin As | 1 |
| 14***80 | Lever | 1 |
| 14***81 | Bracket | 1 |
154-5018 Cylinder Gp-Bucket
| 15***18 | Cylinder Group-Bucket | 1 |
| 16***13 | Kit-Seal | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
293-6264 Cylinder Gp-Bucket
| 26***41 | Kit-Seal | 1 |
| 29***64 | Cylinder Group-Bucket | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
278-1975 Cylinder Gp-Grapple -Industrial
| 25***97 | Bearing-Sleeve | 1 |
| 25***42 | Bearing-Sleeve | 1 |
| 27***70 | Kit-Seal; (Hydraulic Cylinder) | 1 |
164-9295 Cylinder Gp-Grapple
| 16***95 | Cylinder Group-Grapple | 1 |
| 17***85 | Kit-Seal | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
156-5512 Cylinder Gp-Grapple
| 15***12 | Cylinder Group-Grapple | 1 |
| 16***13 | Kit-Seal | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
278-1969 Cylinder Gp-Hydraulic
| 25***97 | Bearing-Sleeve | 1 |
| 27***69 | Cylinder Group-Hydraulic | 1 |
| 27***70 | Kit-Seal; (Hydraulic Cylinder) | 1 |
225-9521 Cylinder Gp-Hydraulic -Angle Blade
| 17***58 | Kit-Seal | 1 |
| 21***55 | Rod End As | 1 |
| 22***21 | Cylinder Group-Hydraulic; -Angle Blade | 1 |
192-2640 Cylinder Gp-Hydraulic -Coupler
| 19***40 | Cylinder Group-Hydraulic; -Coupler | 1 |
274-9930 Cylinder Gp-Hydraulic -Angle Blade
| 02***87 | Fitting-Grease; (Universal Joint) | 2 |
| 26***40 | Kit-Seal; (Swing Cylinder) | 1 |
| 27***30 | Cylinder Group-Hydraulic; -Angle Blade | 1 |
274-9931 Cylinder Gp-Hydraulic -Angle Blade
| 02***87 | Fitting-Grease; (Universal Joint) | 2 |
| 26***40 | Kit-Seal; (Swing Cylinder) | 1 |
| 27***31 | Cylinder Group-Hydraulic; -Angle Blade | 1 |
230-3695 Cylinder Gp-Lift -Rh
| 21***23 | Kit-Seal | 1 |
| 23***95 | Cylinder Group-Lift; -Rh | 1 |
230-3685 Cylinder Gp-Lift -Lh
| 21***23 | Kit-Seal | 1 |
| 23***85 | Cylinder Group-Lift; -Lh | 1 |
230-3705 Cylinder Gp-Lift
| 21***24 | Kit-Seal; (Lift) | 1 |
| 23***05 | Cylinder Group-Lift | 1 |
230-3687 Cylinder Gp-Tilt -Lh
| 21***22 | Kit-Seal | 1 |
| 23***87 | Cylinder Group-Tilt; -Lh | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
230-3697 Cylinder Gp-Tilt -Rh
| 21***22 | Kit-Seal | 1 |
| 23***97 | Cylinder Group-Tilt; -Rh | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
9u-6995 Fitting Gp-Hydraulic
| 2S***78 | Seal-O-Ring (Id=37.47mm) | 1 |
| 9U***95 | Fitting Group-Hydraulic | 1 |
278-1263 Hydraulic Ar
| 19***47 | Accumulator & Mtg Group-Hydraulic; -Work Tool | 1 |
| 21***31 | Lines Group-Pilot; -Direction, Speed | 1 |
| 21***32 | Lines Group-Pilot; -Work Tool | 1 |
218-5750 Hydraulic Ar
| 21***31 | Lines Group-Lift Cylinder | 1 |
| 21***32 | Lines Group-Tilt Cylinder | 1 |
| 21***50 | Hydraulic Ar | 1 |
218-6780 Hydraulic Ar
| 19***84 | Pump & Mtg Group-Work Tool | 1 |
| 19***47 | Accumulator & Mtg Group-Hydraulic; -Work Tool | 1 |
| 21***24 | Filter & Lines Group-Hydraulic | 1 |
278-1237 Hydraulic Ar
| 19***47 | Accumulator & Mtg Group-Hydraulic; -Work Tool | 1 |
| 21***24 | Filter & Lines Group-Hydraulic | 1 |
| 21***25 | Lines Group-Hydraulic Oil Cooler | 1 |
218-5710 Hydraulic Ar -Work Tool Positioner
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***16 | Switch Group-Rocker; -Work Tool Positioner | 1 |
| 21***10 | Hydraulic Ar; -Work Tool Positioner | 1 |
218-5720 Hydraulic Ar
| 19***84 | Pump & Mtg Group-Work Tool | 1 |
| 19***47 | Accumulator & Mtg Group-Hydraulic; -Work Tool | 1 |
| 21***24 | Filter & Lines Group-Hydraulic | 1 |
218-6150 Hydraulic Ar -Without Work Tool Positioner
| 21***50 | Hydraulic Ar; -Without Work Tool Positioner | 1 |
| 21***68 | Lines Group-Lift Cylinder | 1 |
| 21***70 | Lines Group-Tilt Cylinder | 1 |
218-5920 Hydraulic Ar
| 19***84 | Pump & Mtg Group-Work Tool | 1 |
| 19***47 | Accumulator & Mtg Group-Hydraulic; -Work Tool | 1 |
| 21***27 | Motor & Mtg Group-Hydraulic Fan | 1 |
278-1250 Hydraulic Ar
| 19***47 | Accumulator & Mtg Group-Hydraulic; -Work Tool | 1 |
| 21***24 | Filter & Lines Group-Hydraulic | 1 |
| 21***25 | Lines Group-Hydraulic Oil Cooler | 1 |
218-6880 Hydraulic Ar
| 19***84 | Pump & Mtg Group-Work Tool | 1 |
| 19***47 | Accumulator & Mtg Group-Hydraulic; -Work Tool | 1 |
| 21***28 | Motor & Mtg Group-Hydraulic Fan | 1 |
218-5751 Hydraulic Ar
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***16 | Switch Group-Rocker; -Work Tool Positioner | 1 |
| 21***29 | Manifold & Mtg Group-Control; -Work Tool Positioner | 1 |
218-6752 Installation Gp-Auxiliary Hyd -Kit
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 2 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
218-6751 Installation Gp-Auxiliary Hyd -Kit, Rear
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 2 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
218-6753 Installation Gp-Auxiliary Hyd -Kit, Rear
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 2 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
218-6754 Installation Gp-Auxiliary Hyd -Kit
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 14***15 | Connector As | 4 |
| 14***35 | Tee, -6 Orb / Orfs | 1 |
233-5720 Kit-Joystick Conversion -Dual Control
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 14***25 | Connector As. | 3 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
218-6755 Kit-Quick Coupler Conversion -Hydraulic
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***90 | Fuse; (10 Amp) | 1 |
| 12***67 | Hose | 0 |
218-6756 Kit-Quick Coupler Conversion -Hydraulic
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***90 | Fuse; (10 Amp) | 1 |
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
279-5414 Lines Gp-Bucket -Multipurpose
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
279-5415 Lines Gp-Bucket -Multipurpose
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
279-5416 Lines Gp-Bucket -Multipurpose
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
285-6113 Lines Gp-Bucket -Utility
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***95 | Fitting As; (Quick Disconnect, Male) | 1 |
293-0140 Lines Gp-Bucket -Multipurpose
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
154-5051 Lines Gp-Bucket
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
279-5413 Lines Gp-Bucket -Multipurpose
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
154-5019 Lines Gp-Bucket
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
154-5052 Lines Gp-Bucket
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
279-5412 Lines Gp-Bucket -Industrial
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***95 | Fitting As; (Quick Disconnect, Male) | 1 |
199-8306 Lines Gp-Bucket
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
231-5273 Lines Gp-Connecting
| 14***15 | Connector As | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 6 |
| 14***42 | Connector Group | 2 |
177-1986 Lines Gp-Connecting
| 14***19 | Connector As | 2 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
286-9250 Lines Gp-Grapple
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 16***89 | Hose As | 2 |
286-9279 Lines Gp-Grapple
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 16***89 | Hose As | 2 |
165-8733 Lines Gp-Grapple
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***95 | Fitting As; (Quick Disconnect, Male) | 1 |
161-0187 Lines Gp-Grapple
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***95 | Fitting As; (Quick Disconnect, Male) | 1 |
218-5630 Lines Gp-Hydraulic Fan
| 14***15 | Connector As | 1 |
| 14***16 | Connector Group | 2 |
| 21***84 | Hose As | 1 |
218-6565 Lines Gp-Hydraulic Fan
| 14***15 | Connector As | 3 |
| 14***16 | Connector Group | 3 |
| 21***84 | Hose As | 1 |
218-6572 Lines Gp-Hydraulic Oil Cooler
| 09***67 | Spacer; (10.5x2x45-mm Thk) | 1 |
| 10***15 | Elbow Group | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
218-5625 Lines Gp-Hydraulic Oil Cooler
| 09***67 | Spacer; (10.5x2x45-mm Thk) | 1 |
| 10***15 | Elbow Group | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
218-5733 Lines Gp-Lift Cylinder
| 14***97 | Block | 2 |
| 14***15 | Connector As | 1 |
| 14***41 | Connector Group | 2 |
218-5711 Lines Gp-Lift Cylinder
| 14***15 | Connector As | 1 |
| 14***41 | Connector Group | 2 |
| 14***90 | Elbow Group | 1 |
218-5731 Lines Gp-Lift Cylinder
| 14***97 | Block | 2 |
| 14***41 | Connector Group | 2 |
| 18***73 | Tube As | 2 |
218-6168 Lines Gp-Lift Cylinder
| 14***41 | Connector Group | 2 |
| 19***74 | Hose As | 2 |
| 19***75 | Hose As | 2 |
218-5834 Lines Gp-Lowering Control -Manual
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
218-5617 Lines Gp-Lowering Control -Manual
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 14***65 | Elbow | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
218-5631 Lines Gp-Pilot -Direction, Speed
| 14***16 | Connector Group | 2 |
| 14***25 | Connector As. | 5 |
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 2 |
218-5632 Lines Gp-Pilot -Work Tool
| 11***83 | Connector | 1 |
| 12***50 | Valve-Check; (Quick Coupler Solenoid) | 1 |
| 14***25 | Connector As. | 9 |
218-5730 Lines Gp-Pump
| 14***15 | Connector As | 1 |
| 14***60 | Elbow Group | 1 |
| 15***40 | Hose; (30cm) | 1 |
218-5855 Lines Gp-Pump
| 14***15 | Connector As | 1 |
| 14***60 | Elbow Group | 1 |
| 15***49 | Hose | 1 |
218-6170 Lines Gp-Tilt Cylinder
| 10***03 | Plate-Cover | 2 |
| 14***34 | Hose As | 4 |
| 14***41 | Connector Group | 2 |
218-5734 Lines Gp-Tilt Cylinder
| 11***15 | Plate-Cover | 2 |
| 14***98 | Clip | 2 |
| 14***34 | Hose As | 4 |
218-5712 Lines Gp-Tilt Cylinder
| 10***03 | Plate-Cover | 2 |
| 14***34 | Hose As | 4 |
| 14***19 | Connector As | 1 |
218-5732 Lines Gp-Tilt Cylinder
| 11***15 | Plate-Cover | 2 |
| 14***98 | Clip | 2 |
| 14***34 | Hose As | 4 |
218-5634 Lines Gp-Work Tool
| 10***29 | Stud; (M10x1.5-Thd) | 1 |
| 10***03 | Plate-Cover | 2 |
| 14***41 | Connector Group | 2 |
218-5936 Lines Gp-Work Tool
| 10***29 | Stud; (M10x1.5-Thd) | 1 |
| 10***03 | Plate-Cover | 2 |
| 14***41 | Connector Group | 2 |
218-5940 Manifold & Lines Gp-Coupler
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 14***25 | Connector As. | 4 |
218-6520 Manifold & Lines Gp-Coupler
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 14***25 | Connector As. | 4 |
218-5976 Manifold & Mtg Gp-Control -Work Tool Positioner
| 21***76 | Manifold & Mtg Group-Control; -Work Tool Positioner | 1 |
| 21***77 | Plate As | 1 |
| 22***18 | Manifold & Solenoid Group-Control; -Work Tool Positioner | 1 |
218-5729 Manifold & Mtg Gp-Control -Work Tool Positioner
| 21***29 | Manifold & Mtg Group-Control; -Work Tool Positioner | 1 |
| 22***08 | Manifold & Solenoid Group-Control; -Work Tool Positioner | 1 |
| 7X***35 | Bolt; (M6x1x60-mm) | 2 |
231-5278 Manifold & Mtg Gp-Control -Angling Blade
| 23***78 | Manifold & Mtg Group-Control; -Angling Blade | 1 |
| 23***79 | Cover | 1 |
| 25***11 | Manifold Group-Control; -Angling Blade | 1 |
223-8418 Manifold & Solenoid Gp-Control
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 1 |
| 15***79 | Kit-Seal; (Relief Valve, Conveyor Cont) | 1 |
224-9408 Manifold & Solenoid Gp-Control
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 15***79 | Kit-Seal; (Relief Valve, Conveyor Cont) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
258-9011 Manifold Gp-Control -Angling Blade
| 18***51 | Washer-Hard; (5.3x8.8x2-mm Thk) | 8 |
| 19***08 | Seal-O-Ring | 1 |
| 21***14 | Seal-O-Ring | 1 |
233-7128 Manifold Gp-Control -Quick Coupler
| 10***08 | Kit-Seal; (Solenoid Valve, Quick Steer) | 1 |
| 23***28 | Manifold Group-Control; -Quick Coupler | 1 |
| 23***26 | Coil As | 2 |
218-5627 Motor & Mtg Gp-Hydraulic Fan
| 21***27 | Motor & Mtg Group-Hydraulic Fan | 1 |
| 22***60 | Motor Group-Gear; -Hydraulic Fan | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
218-5628 Motor & Mtg Gp-Hydraulic Fan
| 21***93 | Motor Group-Gear; -Hydraulic Fan | 1 |
| 21***28 | Motor & Mtg Group-Hydraulic Fan | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
261-6123 Motor & Mtg Gp-Hydraulic Fan
| 07***33 | Wire As | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 13***11 | Sensor Group-Temperature; (Transmission Lubrication Oil) | 1 |
218-6840 Motor Gp-Gear
| 09***94 | Ring-Retaining | 1 |
| 21***40 | Motor Group-Gear; -Refrigerant Compressor | 1 |
| 23***26 | Seal-Shaft | 1 |
216-6193 Motor Gp-Gear -Hydraulic Fan
| 09***94 | Ring-Retaining | 1 |
| 21***93 | Motor Group-Gear; -Hydraulic Fan | 1 |
| 22***40 | Valve Group-Relief; (Gear Motor) | 1 |
225-9260 Motor Gp-Gear -Hydraulic Fan
| 09***94 | Ring-Retaining | 1 |
| 22***60 | Motor Group-Gear; -Hydraulic Fan | 1 |
| 22***40 | Valve Group-Relief; (Gear Motor) | 1 |
269-9467 Motor Gp-Gear
| 09***94 | Ring-Retaining | 1 |
| 23***86 | Seal Group-Lip Type | 1 |
| 26***67 | Motor Group-Gear | 1 |
156-0891 Mounting Gp-Cylinder -Industrial
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 15***13 | Plate | 1 |
| 15***41 | Pin | 2 |
165-8731 Mounting Gp-Cylinder -Utility
| 15***13 | Pin | 2 |
| 16***31 | Mounting Group-Cylinder; -Utility | 1 |
| 6V***89 | Locknut; (M8x1.25-Thd) | 2 |
154-5011 Mounting Gp-Cylinder
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***12 | Pin | 2 |
| 15***13 | Pin | 2 |
286-9248 Mounting Gp-Cylinder -Grapple Bucket
| 15***41 | Pin | 2 |
| 15***42 | Pin | 2 |
| 28***48 | Mounting Group-Cylinder; -Grapple Bucket | 1 |
142-8714 Plug Gp-Pilot Valve
| 14***14 | Plug Group-Pilot Valve | 1 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
190-8084 Pump & Mtg Gp-Work Tool
| 19***84 | Pump & Mtg Group-Work Tool | 1 |
| 23***42 | Pump Group-Gear; -Work Tool | 1 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 2 |
306-8137 Pump & Mtg Gp-Work Tool
| 28***58 | Pump Group-Gear | 1 |
| 30***37 | Pump & Mtg Group-Work Tool, Electrical Terminal | 1 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 2 |
261-6096 Pump & Mtg Gp-Work Tool
| 26***96 | Pump & Mtg Group-Work Tool | 1 |
| 26***66 | Pump Group-Gear | 1 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 2 |
238-7642 Pump Gp-Gear -Work Tool
| 23***57 | Seal-Shaft | 2 |
| 23***42 | Pump Group-Gear; -Work Tool | 1 |
| 27***60 | Washer-Hard; (15x22x2.5-mm Thk) | 4 |
289-6358 Pump Gp-Gear
| 09***90 | Bolt-Socket Head; (M14x2x60-mm) | 4 |
| 23***57 | Seal-Shaft | 2 |
| 27***60 | Washer-Hard; (15x22x2.5-mm Thk) | 4 |
177-3397 Pump Gp-Gear
| 10***41 | Ring-Snap | 1 |
| 13***15 | Seal-Shaft | 1 |
| 17***97 | Pump Group-Gear | 1 |
269-9466 Pump Gp-Gear
| 23***57 | Seal-Shaft | 2 |
| 26***66 | Pump Group-Gear | 1 |
| 27***60 | Washer-Hard; (15x22x2.5-mm Thk) | 4 |
233-5980 Tank & Mtg Gp-Hydraulic
| 15***14 | Bracket | 1 |
| 20***91 | Tank Group-Hydraulic | 1 |
| 20***29 | Breather; (Inline)(Breather)(Hydraulic Oil) | 1 |
204-1491 Tank Gp-Hydraulic
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 6 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***56 | Seal-O-Ring | 1 |
218-6725 Valve & Mtg Gp-Control
| 21***70 | Valve Group-Control | 1 |
| 21***61 | Bracket | 1 |
| 21***25 | Valve & Mtg Group-Control | 1 |
218-6275 Valve & Mtg Gp-Control
| 21***69 | Valve Group-Control; -Work Tool, 3-Function | 1 |
| 21***75 | Valve & Mtg Group-Control | 1 |
| 21***61 | Bracket | 1 |
209-0640 Valve & Mtg Gp-Solenoid
| 14***44 | Valve Group-Solenoid | 1 |
| 18***69 | Manifold | 1 |
| 20***40 | Valve & Mtg Group-Solenoid | 1 |
216-6170 Valve Gp-Control
| 00***82 | Spring | 3 |
| 12***16 | Bolt-Shoulder | 1 |
| 14***31 | Valve-Check | 3 |
216-6169 Valve Gp-Control -Work Tool, 3-Function
| 00***82 | Spring | 3 |
| 12***16 | Bolt-Shoulder | 1 |
| 14***31 | Valve-Check | 3 |
112-1817 Valve Gp-Manual
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 11***61 | Seal Kit; (Includes Seals, Thrust Ring, Stem And Connectors) | 1 |
| 20***71 | Valve Group-Manual; (Coupler Pin, Lift Arm Lwr Cont) | 1 |
228-9228 Valve Gp-Pilot -Work Tool
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 16***78 | Kit-Pilot Valve; (Spring)(Pilot Valve Lift & Dump) | 1 |
| 16***40 | Plate | 1 |
233-5732 Valve Gp-Pilot
| 1M***76 | Lockwasher | 2 |
| 23***32 | Valve Group-Pilot | 1 |
| 30***18 | Gear Cover Gasket, Kit-Detent | 1 |
233-5733 Valve Gp-Pilot
| 1M***76 | Lockwasher | 2 |
| 23***33 | Valve Group-Pilot | 1 |
| 30***42 | Kit-Plunger | 1 |
343-0868 Valve Gp-Pilot -Direction, Speed
| 15***65 | Kit-Seal; (Pilot Valve) | 1 |
| 16***78 | Kit-Pilot Valve; (Spring)(Pilot Valve Lift & Dump) | 1 |
| 19***00 | Valve Group-Solenoid; -12-Volt-Work Tool | 1 |
218-6119 Valve Gp-Pilot
| 12***04 | Plate | 1 |
| 15***65 | Kit-Seal; (Pilot Valve) | 1 |
| 16***78 | Kit-Pilot Valve; (Spring)(Pilot Valve Lift & Dump) | 1 |
295-1799 Valve Gp-Relief
| 13***76 | Seal-O-Ring | 1 |
| 29***99 | Valve Group-Relief; -Main | 1 |
188-0878 Valve Gp-Relief -Main
| 03***79 | Seal-O-Ring (Id=10.82mm) | 3 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 2 |
| 03***69 | Nut; (3/8-24-Thd) | 1 |
215-3271 Valve Gp-Solenoid
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 1 |
| 21***71 | Valve Group-Solenoid | 1 |
216-0610 Valve Gp-Solenoid
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
| 17***92 | Kit-Seal; (Solenoid Valve) | 1 |
| 21***10 | Valve Group-Solenoid | 1 |
185-4254 Valve Gp-Solenoid
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
| 18***54 | Valve Group-Solenoid; -Auxiliary | 1 |
| 21***73 | Nut; (1/2-28-Thd) | 1 |
231-6287 Valve Gp-Solenoid -A/C Compressor
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***70 | Nut; (1/2-20-2b-Thd) | 2 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
144-1644 Valve Gp-Solenoid
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***48 | Kit-Seal; (Solenoid Valve) | 1 |
| 14***43 | Solenoid As | 1 |
195-9700 Valve Gp-Solenoid -12-Volt
| 19***00 | Valve Group-Solenoid; -12-Volt-Work Tool | 1 |
| 20***71 | Kit-Seal; (Solenoid Valve) | 1 |
| 21***61 | Flange | 1 |
212-6570 Valve Gp-Solenoid
| 21***44 | Valve Group-Solenoid | 1 |
| 21***32 | Washer-Hard; (8.8x13x2-mm Thk) | 4 |
| 21***50 | Solenoid As; (Remote Control) | 1 |
Implements
218-5798 Arm As-Lift
| 21***98 | Arm As-Lift | 1 |
| 6K***48 | Bearing-Sleeve | 4 |
| 7T***99 | Link | 2 |
218-5898 Arm As-Lift
| 21***98 | Arm As-Lift | 1 |
| 4K***09 | Bearing-Sleeve | 4 |
| 6K***48 | Bearing-Sleeve | 4 |
222-5695 Bracket Gp-Support
| 21***44 | Bracket As | 1 |
| 22***95 | Bracket Group-Support | 1 |
Lubrication System
287-6016 Breather Gp
| 11***68 | Clip | 2 |
| 15***28 | Clamp | 1 |
| 19***22 | Bolt As; (M8x1.25x22-mm) | 2 |
235-5897 Filter Gp-Engine Oil
| 09***37 | Seal-O-Ring | 1 |
| 09***71 | Seal-O-Ring (Id=94.40mm) | 1 |
| 1R***34 | Filter-Engine Oil | 1 |
235-5898 Fumes Disposal Gp
| 23***37 | Clip-Hose | 1 |
| 23***38 | Clip | 3 |
| 23***39 | Pipe | 1 |
235-5888 Gauge Gp-Oil Level (Dipstick)
| 23***12 | Guide | 1 |
| 23***13 | Stay | 1 |
| 23***56 | Gauge-Oil; (Dipstick)(Engine Oil) | 1 |
287-5377 Lines Gp-Engine Oil
| 23***94 | Strainer As-Oil; (Engine) | 1 |
| 23***13 | Seal-O-Ring | 1 |
| 28***77 | Lines Group-Engine Oil | 1 |
235-5895 Pump Gp-Engine Oil
| 10***44 | Nut | 1 |
| 10***83 | Seal-O-Ring | 1 |
| 11***41 | Pump As-Oil | 1 |
287-5665 Valve Gp-Engine Oil Relief
| 10***25 | Valve As; (Oil Bypass)(Engine) | 1 |
| 23***96 | Gasket | 1 |
| 23***96 | Gasket | 1 |
Machine Arrangement
218-5610 Chassis Ar
| 15***21 | Guide Group-Lines | 1 |
| 21***00 | Wiring Group-Chassis | 1 |
| 21***18 | Mounting Group-Pump | 1 |
218-5810 Chassis Ar
| 15***21 | Guide Group-Lines | 1 |
| 21***00 | Wiring Group-Chassis | 1 |
| 21***18 | Mounting Group-Pump | 1 |
278-1246 Common Ar
| 15***50 | Counterweight Group | 1 |
| 21***00 | Power Train Ar | 1 |
| 21***10 | Chassis Ar | 1 |
218-6236 Common Ar
| 21***14 | Installation Ar-Engine | 1 |
| 21***00 | Power Train Ar | 1 |
| 21***10 | Chassis Ar | 1 |
218-6252 Common Ar
| 21***14 | Installation Ar-Engine | 1 |
| 21***00 | Power Train Ar | 1 |
| 21***10 | Chassis Ar | 1 |
278-1236 Common Ar
| 21***00 | Power Train Ar | 1 |
| 21***10 | Chassis Ar | 1 |
| 21***53 | Film Group | 1 |
278-1262 Common Ar
| 21***00 | Power Train Ar | 1 |
| 21***10 | Chassis Ar | 1 |
| 21***58 | Film Group | 1 |
218-6262 Common Ar
| 21***14 | Installation Ar-Engine | 1 |
| 21***00 | Power Train Ar | 1 |
| 21***10 | Chassis Ar | 1 |
218-6246 Common Ar
| 15***50 | Counterweight Group | 1 |
| 21***14 | Installation Ar-Engine | 1 |
| 21***00 | Power Train Ar | 1 |
342-5005 Control Ar-Machine -Aux Proportional Flow, 1-Speed
| 14***60 | Drive Group-Tandem; -Work Tool | 1 |
| 19***80 | Motor & Mtg Group-Hydrostatic | 1 |
| 21***28 | Pump & Mtg Group-Hydrostatic | 1 |
342-5006 Control Ar-Machine -Aux Proportional Flow, 1-Speed
| 19***60 | Drive Group-Tandem | 1 |
| 19***80 | Motor & Mtg Group-Hydrostatic | 1 |
| 21***28 | Pump & Mtg Group-Hydrostatic | 1 |
342-5008 Control Ar-Machine -Aux Proportional Flow, 2-Speed
| 19***57 | Motor & Mtg Group-Hydrostatic; -2-Speed | 1 |
| 19***60 | Drive Group-Tandem | 1 |
| 21***18 | Control Group-Pilot Operated Hydraulic; -Work Tool | 1 |
342-5007 Control Ar-Machine -Aux Proportional Flow, 2-Speed
| 14***60 | Drive Group-Tandem; -Work Tool | 1 |
| 19***57 | Motor & Mtg Group-Hydrostatic; -2-Speed | 1 |
| 21***18 | Control Group-Pilot Operated Hydraulic; -Work Tool | 1 |
278-4728 Conversion Ar-Machine -Europe
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 18***47 | Lifting Group-Machine; -4-Point | 1 |
| 21***46 | Box Group-Storage | 1 |
261-6165 Conversion Ar-Machine -Outside Nacd
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 21***46 | Box Group-Storage | 1 |
| 21***24 | Radiator & Oil Cooler Mtg Group | 1 |
261-6126 Conversion Ar-Machine
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 19***84 | Pump & Mtg Group-Work Tool | 1 |
| 21***24 | Radiator & Oil Cooler Mtg Group | 1 |
278-1231 Conversion Ar-Machine -United Kingdom
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 19***84 | Film Group; -Clearance | 1 |
| 21***46 | Box Group-Storage | 1 |
278-5448 Conversion Ar-Machine -Germany, High Flow, 2-Speed
| 11***58 | Film-Identification; (20-Km/H) | 3 |
| 17***22 | Visor Group-Cab | 1 |
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
278-5419 Conversion Ar-Machine -Germany
| 17***22 | Visor Group-Cab | 1 |
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
340-7719 Conversion Ar-Machine -Outside Nacd
| 21***46 | Box Group-Storage | 1 |
| 21***24 | Radiator & Oil Cooler Mtg Group | 1 |
| 21***91 | Panel Ar-Instrument; -Eame | 1 |
278-1230 Conversion Ar-Machine -Germany, 2-Speed
| 11***58 | Film-Identification; (20-Km/H) | 3 |
| 17***22 | Visor Group-Cab | 1 |
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
278-5373 Conversion Ar-Machine -Italy
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 21***15 | Lighting Group-Roading | 1 |
278-5351 Conversion Ar-Machine -Outside Nacd
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 19***84 | Film Group; -Clearance | 1 |
| 21***46 | Box Group-Storage | 1 |
278-5418 Conversion Ar-Machine -Germany
| 17***22 | Visor Group-Cab | 1 |
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
261-6170 Conversion Ar-Machine
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 19***84 | Pump & Mtg Group-Work Tool | 1 |
| 21***24 | Radiator & Oil Cooler Mtg Group | 1 |
278-1214 Conversion Ar-Machine -Italy
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 21***15 | Lighting Group-Roading | 1 |
278-5352 Conversion Ar-Machine -United Kingdom
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 18***47 | Lifting Group-Machine; -4-Point | 1 |
| 19***84 | Film Group; -Clearance | 1 |
278-5374 Conversion Ar-Machine -Italy
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 18***47 | Lifting Group-Machine; -4-Point | 1 |
252-0389 Conversion Ar-Machine -Europe
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 21***46 | Box Group-Storage | 1 |
| 21***91 | Panel Ar-Instrument; -Eame | 1 |
278-1229 Conversion Ar-Machine -Germany
| 17***22 | Visor Group-Cab | 1 |
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
278-5449 Conversion Ar-Machine -Germany, 2-Speed
| 11***58 | Film-Identification; (20-Km/H) | 3 |
| 17***22 | Visor Group-Cab | 1 |
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
Operator Station
186-6190 Accumulator Gp-Refrigerant -With Desiccant
| 18***90 | Accumulator Group-Refrigerant; -With Desiccant | 1 |
176-3900 Accumulator Gp-Refrigerant -With Desiccant
| 17***00 | Accumulator Group-Refrigerant; -With Desiccant | 1 |
218-6050 Air Conditioner Ar
| 21***19 | Lines Group-Heater | 1 |
| 21***80 | Lines Group-Air Conditioner | 1 |
| 21***50 | Air Conditioner Ar | 1 |
218-6404 Air Conditioner Gp
| 21***02 | Insulation As | 1 |
| 21***04 | Air Conditioner Group | 1 |
| 21***05 | Air Conditioner Group | 1 |
218-6405 Air Conditioner Gp
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***31 | Switch-Temperature; (Air Conditioner) | 1 |
| 18***15 | Clip | 10 |
236-4830 Armrest & Mounting Gp
| 19***37 | Insert-Threaded; (M8x1.25-Thd) | 2 |
| 19***39 | Stud | 4 |
| 21***42 | Plate | 2 |
236-4833 Armrest Gp
| 10***62 | Screw-Machine; (4-40x0.63-In) | 4 |
| 13***16 | Stud-Ball | 2 |
| 14***28 | Locknut; (4-40-Thd) | 4 |
218-6420 Box Gp-Storage -Literature
| 15***71 | Compartment As | 1 |
| 19***35 | Insert-Threaded; (M6x1-Thd) | 4 |
| 21***20 | Box Group-Storage; -Literature | 1 |
216-6146 Box Gp-Storage
| 21***45 | Box As-Storage | 1 |
| 21***46 | Box Group-Storage | 1 |
| 22***91 | Latch As | 1 |
218-6350 Cab Ar-Enclosed Rops
| 19***23 | Window Group-Cab; -Rear | 1 |
| 21***50 | Fastener Group-Wiring Harness | 1 |
| 21***50 | Cab Ar-Enclosed Rops | 1 |
218-6367 Cab Gp-Enclosed Rops
| 21***67 | Cab Group-Enclosed Rops | 1 |
322-5614 Cab Gp-Enclosed Rops
| 21***86 | Button | 7 |
| 21***67 | Cab Group-Enclosed Rops | 1 |
| 28***72 | Window | 1 |
276-0074 Cable Gp-Control
| 27***74 | Cable Group-Control | 1 |
| 8T***42 | Rod End-Yoke | 1 |
| 8T***44 | Pin As-Spring | 1 |
218-6832 Compressor & Motor Gp-Refrig
| 21***32 | Compressor & Motor Group-Refrig | 1 |
| 21***33 | Compressor Group-Refrigerant | 1 |
| 21***40 | Motor Group-Gear; -Refrigerant Compressor | 1 |
218-6830 Compressor & Mtg Gp-Refrig
| 21***30 | Compressor & Mtg Group-Refrig | 1 |
| 21***32 | Compressor & Motor Group-Refrig | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 3 |
218-6148 Condenser & Mtg Gp-Refrigerant
| 11***63 | Clip-Spring | 3 |
| 21***60 | Shroud As | 1 |
| 21***48 | Condenser & Mtg Group-Refrigerant | 1 |
231-4256 Control Gp-Handle -Lh
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
231-4257 Control Gp-Handle -Rh
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
231-4260 Control Gp-Handle -Rh
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 7 |
231-4258 Control Gp-Handle -Lh
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 7 |
218-6485 Control Gp-Handle -Direction, Speed
| 15***70 | Kit-Pilot Valve; (Lever) | 1 |
| 17***02 | Boot | 1 |
| 21***18 | Handle Group-Modular | 1 |
218-6490 Control Gp-Handle -Work Tool
| 15***70 | Kit-Pilot Valve; (Lever) | 1 |
| 17***03 | Boot | 1 |
| 21***18 | Handle Group-Modular | 1 |
218-6480 Control Gp-Handle -Direction, Speed
| 15***70 | Kit-Pilot Valve; (Lever) | 1 |
| 17***02 | Boot | 1 |
| 21***17 | Handle Group-Modular | 1 |
342-5019 Control Gp-Pilot Operated Hyd -Horn, Fourth Function
| 09***07 | Nut; (M12x1.75-Thd) | 1 |
| 16***25 | Horn As; (24-Volt, Low Tone) | 1 |
| 21***24 | Wiring Group-Work Tool; -Vertical Lift | 1 |
218-6924 Control Gp-Pilot Operated Hyd
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***01 | Resistor As; (390-Ohm, 2-Watt) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 1 |
218-6925 Control Gp-Pilot Operated Hyd
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***01 | Resistor As; (390-Ohm, 2-Watt) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 1 |
218-5932 Control Gp-Pilot Operated Hyd
| 09***07 | Nut; (M12x1.75-Thd) | 1 |
| 11***60 | Strap | 1 |
| 16***25 | Horn As; (24-Volt, Low Tone) | 1 |
218-5931 Control Gp-Pilot Operated Hyd
| 11***60 | Strap | 1 |
| 16***25 | Horn As; (24-Volt, Low Tone) | 1 |
| 21***31 | Control Group-Pilot Operated Hydraulic; -Hydrostatic | 1 |
218-5612 Control Gp-Pilot Operated Hyd
| 09***07 | Nut; (M12x1.75-Thd) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***60 | Strap | 1 |
342-5018 Control Gp-Pilot Operated Hyd
| 09***07 | Nut; (M12x1.75-Thd) | 1 |
| 16***25 | Horn As; (24-Volt, Low Tone) | 1 |
| 21***22 | Bracket As | 1 |
218-5934 Control Gp-Pilot Operated Hyd
| 09***07 | Nut; (M12x1.75-Thd) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***60 | Strap | 1 |
218-5933 Control Gp-Pilot Operated Hyd
| 09***07 | Nut; (M12x1.75-Thd) | 1 |
| 11***60 | Strap | 1 |
| 11***90 | Fuse; (10 Amp) | 1 |
218-5618 Control Gp-Pilot Operated Hyd
| 09***07 | Nut; (M12x1.75-Thd) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***60 | Strap | 1 |
218-5947 Control Gp-Pilot Operated Hyd
| 09***07 | Nut; (M12x1.75-Thd) | 1 |
| 11***60 | Strap | 1 |
| 11***90 | Fuse; (10 Amp) | 1 |
218-5611 Control Gp-Pilot Operated Hyd -Work Tool
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***60 | Strap | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
218-5930 Control Gp-Pilot Operated Hyd
| 11***60 | Strap | 1 |
| 21***30 | Control Group-Pilot Operated Hydraulic; -Hydrostatic | 1 |
| 21***19 | Valve Group-Pilot; -Direction, Speed | 1 |
276-5708 Coupling Gp-Drive -Refrigerant Compressor, Motor
| 21***36 | Coupling Group-Drive; (Refrigerant Compressor, Motor) | 1 |
| 21***37 | Coupling | 1 |
| 21***38 | Hub; (Compressor) | 1 |
218-6419 Cover Gp-Console -Without Air Conditioner, Heater
| 17***05 | Screw-Button Head; (M6 X 1.0 X) | 8 |
| 21***89 | Console; (Rh) | 1 |
| 21***91 | Console; (Lh) | 1 |
218-6418 Cover Gp-Console
| 11***58 | Washer; (6.5x17x1-mm Thk) | 6 |
| 12***43 | Seal; (70-cm) | 0 |
| 21***86 | Cover As | 1 |
142-9118 Cover Gp-Instrument Panel -Service Meter
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 2 |
| 10***04 | Suppressor As-Arc | 1 |
| 14***18 | Cover Group-Instrument Panel; -Service Meter | 1 |
218-6440 Door & Mtg Gp-Cab -Polycarbonate
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***15 | Connector | 1 |
223-0600 Door & Mtg Gp-Cab -Glass
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***15 | Connector | 1 |
223-0616 Door Gp-Cab -Glass
| 03***28 | Grommet | 1 |
| 10***45 | Blade As-Wiper; (600-mm) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
218-6441 Door Gp-Cab -Polycarbonate
| 03***28 | Grommet | 1 |
| 10***45 | Blade As-Wiper; (600-mm) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
218-6431 Door Gp-Cab -Glass
| 21***31 | Door Group-Cab; -Glass | 1 |
| 22***09 | Glass-Cab; (Door) | 1 |
| 22***10 | Glass-Cab; (Door) | 1 |
276-3615 Door Gp-Cab -Polycarbonate
| 27***15 | Door Group-Cab; -Polycarbonate | 1 |
| 27***32 | Seal | 1 |
| 28***59 | Frame As | 1 |
276-3440 Door Gp-Cab -Polycarbonate
| 03***28 | Grommet | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
218-6394 Duct Gp-Cab Air
| 14***71 | Louver As | 6 |
| 17***05 | Screw-Button Head; (M6 X 1.0 X) | 8 |
| 21***94 | Duct Group-Cab Air | 1 |
231-7327 Frame Gp-Window -Lh
| 23***27 | Frame Group-Window; -Lh | 1 |
| 23***28 | Frame As-Window; (Lh) | 1 |
| 23***29 | Kit-Latch | 1 |
231-7325 Frame Gp-Window -Rh
| 23***25 | Frame Group-Window; -Rh | 1 |
| 23***26 | Frame As-Window; (Rh) | 1 |
| 23***29 | Kit-Latch | 1 |
216-4712 Gauge & Warning Gp -Lh
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 2 |
| 14***58 | Switch As-Start; (Key)(Ignition) | 1 |
| 15***94 | Panel | 1 |
216-4713 Gauge & Warning Gp -Rh
| 08***77 | Lamp Group-Dome; (12-Volt) | 1 |
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 2 |
| 15***97 | Panel | 1 |
233-5632 Guard Gp-Rops/Fops
| 15***61 | Plate As-Fops | 1 |
| 23***32 | Guard Group-Rops/Fops | 1 |
| 23***33 | Film; (Stripe, Lh) | 1 |
218-6400 Handhold Gp
| 21***77 | Handle | 1 |
| 21***00 | Handhold Group | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
218-6117 Handle Gp-Modular
| 15***53 | Grommet | 1 |
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
218-6118 Handle Gp-Modular
| 15***53 | Grommet | 1 |
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
218-6392 Heater & Mtg Gp-Cab
| 21***92 | Heater & Mtg Group-Cab | 1 |
| 21***93 | Heater Group-Cab | 1 |
| 21***02 | Insulation As | 1 |
218-5950 Heater Ar-Cab
| 21***19 | Lines Group-Heater | 1 |
| 21***30 | Lines Group-Hydraulic Fan | 1 |
| 21***50 | Heater Ar-Cab | 1 |
218-6746 Heater Gp-Cab -Kit
| 00***10 | Elbow | 1 |
| 13***53 | Hose; (192.5cm) (X2) | 0 |
| 14***71 | Louver As | 6 |
218-6393 Heater Gp-Cab
| 18***15 | Clip | 10 |
| 20***98 | Knob-Control; (Temperature Select) | 1 |
| 21***93 | Heater Group-Cab | 1 |
245-6811 Holder-Cup
| 24***11 | Holder-Cup | 1 |
230-3742 Horn Gp-Electric
| 11***90 | Fuse; (10 Amp) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***25 | Horn As; (24-Volt, Low Tone) | 1 |
231-8122 Housing As-Side -Air Conditioner, Heater
| 12***78 | Locknut; (M6x1-Thd) | 2 |
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
| 23***22 | Housing As-Side; -Air Conditioner, Heater | 1 |
218-5850 Installation Gp-Cover & Lines -Without Heater, Air Cond
| 21***30 | Lines Group-Hydraulic Fan | 1 |
| 21***50 | Installation Group-Cover & Lines; -Without Heater, Air Cond | 1 |
| 21***18 | Cover Group-Console; -With Air Conditioner, Heater | 1 |
218-6747 Kit-Air Cond & Heater Instl
| 00***10 | Elbow | 1 |
| 08***91 | Bolt; (M10x1.5x55-mm) | 2 |
| 10***74 | Seal-Connector | 2 |
218-6749 Kit-Air Conditioner Instl
| 08***91 | Bolt; (M10x1.5x55-mm) | 2 |
| 10***96 | Clip | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
218-6744 Kit-Cab Door & Mounting -Glass
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***15 | Connector | 1 |
218-6743 Kit-Cab Door & Mounting -Polycarbonate
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***15 | Connector | 1 |
218-6748 Kit-Cab Seal -Debris Barrier
| 12***43 | Seal; (70-cm) | 0 |
| 18***11 | Plate As | 1 |
| 18***12 | Plate | 1 |
234-0774 Lever Gp-Governor
| 12***78 | Locknut; (M6x1-Thd) | 2 |
| 19***63 | Lever Group-Hand Control; (Governor) | 1 |
| 23***32 | Cable As | 1 |
218-6356 Liner Gp-Cab
| 21***56 | Liner Group-Cab | 1 |
| 21***57 | Insulation | 1 |
| 21***59 | Liner-Rear Wall | 1 |
142-9311 Liner-Cab
| 14***11 | Liner-Cab; -Gray | 1 |
218-5680 Lines Gp-Air Conditioner
| 08***91 | Bolt; (M10x1.5x55-mm) | 2 |
| 10***96 | Clip | 2 |
| 18***90 | Accumulator Group-Refrigerant; -With Desiccant | 1 |
218-5619 Lines Gp-Heater
| 00***10 | Elbow | 1 |
| 13***53 | Hose; (192.5cm) (X2) | 0 |
| 21***19 | Lines Group-Heater | 1 |
6v-1970 Literature Gp
| 5P***58 | Sleeve; (Cable Splice) | 1 |
| 5P***00 | Key Total 2 Pieces Per Unit; (Literature Compartment) | 2 |
| 6V***70 | Literature Group; (Literature Compartment) | 1 |
218-6395 Mirror Gp-Rear View
| 21***84 | Mirror As | 1 |
| 21***95 | Mirror Group-Rear View | 1 |
| 3B***05 | Washer,Lock Tube Assembly Mounting; Used On Engine P/N 5r698 | 1 |
223-6537 Module Gp-Warning Indicator
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 10 |
| 22***37 | Module Group-Warning Indicator | 1 |
229-7224 Module Gp-Warning Indicator -12-Volt
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 9 |
249-2910 Module Gp-Warning Indicator
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 9 |
| 23***06 | Gasket | 1 |
218-6370 Mounting Gp-Rops
| 15***78 | Mount As | 2 |
| 15***81 | Mount | 2 |
| 15***90 | Bracket | 1 |
218-5790 Panel Ar-Instrument -Nacd
| 21***90 | Panel Ar-Instrument; -Nacd | 1 |
| 22***98 | Panel Group-Instrument; -Nacd | 1 |
218-5791 Panel Ar-Instrument
| 21***51 | Panel Group-Instrument; -Eame | 1 |
| 21***91 | Panel Ar-Instrument; -Eame | 1 |
225-7998 Panel Gp-Instrument
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 44 |
| 09***34 | Terminal-Blade; (18-Ga To 22-Ga) | 3 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
216-4751 Panel Gp-Instrument
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 57 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
218-6429 Panel Gp-Side
| 13***43 | Bolt-Round Head; (M6x1-6g-Thd) | 5 |
| 19***85 | Plate; (Rh) | 1 |
| 21***29 | Panel Group-Side | 1 |
218-6430 Panel Gp-Side
| 13***43 | Bolt-Round Head; (M6x1-6g-Thd) | 5 |
| 19***85 | Plate; (Rh) | 1 |
| 21***23 | Plate; (Lh) | 1 |
325-8382 Pedal Gp-Governor
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 4 |
| 12***78 | Locknut; (M6x1-Thd) | 1 |
| 16***54 | Kit-Service; (Pedal) | 1 |
218-5565 Pedal Gp-Governor -Includes Lever
| 21***65 | Pedal Group-Governor; -Includes Lever | 1 |
| 21***66 | Cable Group-Governor Control | 1 |
| 23***74 | Lever Group-Governor | 1 |
218-6390 Platform Gp-Operator
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 1 |
| 12***43 | Seal; (70-cm) | 0 |
| 21***61 | Plate As | 1 |
218-6406 Seal Gp-Cab
| 12***43 | Seal; (70-cm) | 0 |
| 18***11 | Plate As | 1 |
| 18***12 | Plate | 1 |
276-6020 Seat Belt Gp
| 0T***44 | Bolt (1.25" Long) | 2 |
| 27***20 | Seat Belt Group | 1 |
| 2D***12 | Washer; (7/16x15/16x1/4-In Thk) | 2 |
276-6019 Seat Belt Gp
| 0T***44 | Bolt (1.25" Long) | 2 |
| 27***19 | Seat Belt Group | 1 |
| 2D***12 | Washer; (7/16x15/16x1/4-In Thk) | 2 |
276-7277 Seat Belt Gp
| 0T***44 | Bolt (1.25" Long) | 2 |
| 27***77 | Seat Belt Group | 1 |
| 2D***12 | Washer; (7/16x15/16x1/4-In Thk) | 2 |
218-6663 Seat Belt Gp
| 0T***44 | Bolt (1.25" Long) | 2 |
| 21***63 | Seat Belt Group | 1 |
| 6E***49 | Washer; (11x27x6-mm Thk) | 2 |
218-6664 Seat Belt Gp
| 0T***44 | Bolt (1.25" Long) | 2 |
| 21***64 | Seat Belt Group | 1 |
| 6E***49 | Washer; (11x27x6-mm Thk) | 2 |
218-6654 Seat Belt Gp
| 0T***44 | Bolt (1.25" Long) | 2 |
| 21***54 | Seat Belt Group | 1 |
| 6E***49 | Washer; (11x27x6-mm Thk) | 2 |
218-6653 Seat Belt Gp
| 0T***44 | Bolt (1.25" Long) | 2 |
| 21***53 | Seat Belt Group | 1 |
| 6E***49 | Washer; (11x27x6-mm Thk) | 2 |
276-7276 Seat Belt Gp
| 0T***44 | Bolt (1.25" Long) | 2 |
| 27***76 | Seat Belt Group; -Suspension | 1 |
| 2D***12 | Washer; (7/16x15/16x1/4-In Thk) | 2 |
142-9305 Seat Gp -Suspension
| 14***05 | Seat Group; -Suspension | 1 |
| 21***80 | Seat Group-Adjustable | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 4 |
218-5562 Seat Gp -Static
| 15***60 | Switch; (Seat) | 1 |
| 15***85 | Wire As | 1 |
| 21***62 | Seat Group; -Static | 1 |
219-4380 Seat Gp-Adjustable
| 15***85 | Wire As | 1 |
| 15***86 | Switch As; (Seat) | 1 |
| 15***11 | Kit-Spring; (Adjustable Seat) | 1 |
218-6380 Spring Gp-Gas -Cab, Door
| 09***25 | Pin-Clevis | 1 |
| 15***82 | Spring-Gas; (Non-Locking) | 1 |
| 17***05 | Pin | 1 |
173-3022 Visor Gp-Cab
| 16***62 | Plate As | 1 |
| 16***69 | Visor Group-Cab | 1 |
| 17***22 | Visor Group-Cab | 1 |
166-2569 Visor Gp-Cab
| 16***69 | Visor Group-Cab | 1 |
| 1D***77 | Bolt-Round Head; (3/8-16x1-In) | 2 |
| 2S***17 | Nut,Plain,Castellat; (3/8-16-Thd) | 1 |
195-6723 Window Gp-Cab
| 14***19 | Window; (Rear) | 1 |
| 19***68 | Insulation | 1 |
| 19***23 | Window Group-Cab; -Rear | 1 |
224-7058 Window Gp-Cab -Upper, Rh
| 20***39 | Seal; (138-cm) | 0 |
| 20***73 | Seal; (220-cm) | 0 |
| 22***58 | Window Group-Cab; -Upper, Rh | 1 |
218-6411 Window Gp-Cab -Side
| 21***11 | Window Group-Cab; -Side | 1 |
| 22***57 | Window Group-Cab; -Upper,Lh | 1 |
| 22***58 | Window Group-Cab; -Upper, Rh | 1 |
218-6745 Window Gp-Cab -Kit, Side
| 21***45 | Window Group-Cab; -Kit, Side | 1 |
| 22***57 | Window Group-Cab; -Upper,Lh | 1 |
| 22***58 | Window Group-Cab; -Upper, Rh | 1 |
224-7057 Window Gp-Cab -Upper,Lh
| 20***39 | Seal; (138-cm) | 0 |
| 20***73 | Seal; (220-cm) | 0 |
| 22***57 | Window Group-Cab; -Upper,Lh | 1 |
Power Train
261-6285 Axle Gp
| 25***59 | Axle Group | 4 |
| 26***85 | Axle Group | 1 |
258-2859 Axle Gp
| 14***24 | Spindle-Wheel | 1 |
| 14***29 | Spacer; (57.16x69.85x27.54-mm Thk) | 1 |
| 15***52 | Seal-Lip Type | 1 |
261-6275 Axle Gp
| 14***58 | Axle Group | 4 |
| 26***75 | Axle Group | 1 |
142-9058 Axle Gp
| 14***23 | Housing-Axle | 1 |
| 14***24 | Spindle-Wheel | 1 |
| 14***29 | Spacer; (57.16x69.85x27.54-mm Thk) | 1 |
218-5614 Drive Control Ar-Hydrostatic
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***31 | Jumper As; (2-Speed) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
218-5608 Drive Control Ar-Hydrostatic
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***31 | Jumper As; (2-Speed) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
218-5609 Drive Control Ar-Hydrostatic
| 19***80 | Motor & Mtg Group-Hydrostatic | 1 |
| 21***28 | Pump & Mtg Group-Hydrostatic | 1 |
| 21***09 | Drive Control Ar-Hydrostatic | 1 |
218-5603 Drive Control Ar-Hydrostatic
| 19***80 | Motor & Mtg Group-Hydrostatic | 1 |
| 21***28 | Pump & Mtg Group-Hydrostatic | 1 |
| 21***03 | Drive Control Ar-Hydrostatic | 1 |
218-5605 Drive Control Ar-Hydrostatic
| 19***80 | Motor & Mtg Group-Hydrostatic | 1 |
| 21***28 | Pump & Mtg Group-Hydrostatic | 1 |
| 21***05 | Drive Control Ar-Hydrostatic | 1 |
218-5607 Drive Control Ar-Hydrostatic
| 19***57 | Motor & Mtg Group-Hydrostatic; -2-Speed | 1 |
| 21***07 | Drive Control Ar-Hydrostatic | 1 |
| 21***21 | Lines Group-Hydrostatic | 1 |
218-5604 Drive Control Ar-Hydrostatic
| 19***80 | Motor & Mtg Group-Hydrostatic | 1 |
| 21***28 | Pump & Mtg Group-Hydrostatic | 1 |
| 21***04 | Drive Control Ar-Hydrostatic | 1 |
218-5606 Drive Control Ar-Hydrostatic
| 19***80 | Motor & Mtg Group-Hydrostatic | 1 |
| 21***28 | Pump & Mtg Group-Hydrostatic | 1 |
| 21***06 | Drive Control Ar-Hydrostatic | 1 |
191-9760 Drive Gp-Tandem
| 10***66 | Bolt; (Self Locking) (M16x2x40mm) | 4 |
| 14***32 | Sprocket; (13-Teeth)(Motor) | 4 |
| 14***33 | Retainer | 2 |
142-9060 Drive Gp-Tandem -Work Tool
| 10***66 | Bolt; (Self Locking) (M16x2x40mm) | 4 |
| 14***32 | Sprocket; (13-Teeth)(Motor) | 4 |
| 14***33 | Retainer | 2 |
218-5980 Filter & Lines Gp-Hydraulic
| 14***15 | Connector As | 1 |
| 14***28 | Connector Assem. | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
218-5624 Filter & Lines Gp-Hydraulic
| 14***15 | Connector As | 1 |
| 14***28 | Connector Assem. | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
223-9974 Filter Gp-Oil -Hydraulic
| 13***04 | Switch As-Pressure; (Power Train Oil Filter Bypass) | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
| 22***74 | Filter Group-Oil; -Hydraulic | 1 |
299-3916 Kit-Sprocket -Xr
| 25***62 | Sprocket-Axle; (Axle) | 2 |
| 25***63 | Sprocket-Motor; (Motor) | 2 |
| 29***16 | Kit-Sprocket; -Xr | 1 |
218-5621 Lines Gp-Hydrostatic
| 14***41 | Hose As | 2 |
| 14***27 | Connector Group | 8 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 5 |
218-5636 Manifold & Lines Gp-Control -Parking Brake, 2-Speed
| 10***30 | Hose Assem. | 2 |
| 14***26 | Adapter; (Straight) (-4 Orb X -4 Orfs) | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 5 |
218-5635 Manifold & Lines Gp-Control -Parking Brake
| 10***30 | Hose Assem. | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 3 |
| 14***35 | Tee, -6 Orb / Orfs | 1 |
222-3692 Manifold & Solenoid Gp-Control -Parking Brake, 2-Speed
| 19***00 | Valve Group-Solenoid; -12-Volt-Work Tool | 1 |
| 21***61 | Flange | 1 |
| 21***10 | Valve Group-Solenoid | 1 |
245-6094 Manifold & Solenoid Gp-Control
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 2 |
| 21***10 | Valve Group-Solenoid | 1 |
| 24***94 | Manifold & Solenoid Group-Control | 1 |
293-6591 Manifold & Solenoid Gp-Control -Parking Brake, 2-Speed
| 29***91 | Manifold & Solenoid Group-Control; -Parking Brake, 2-Speed | 1 |
259-8210 Manifold & Solenoid Gp-Control
| 09***68 | Bolt-Socket Head; (M5x0.8x8-mm) | 2 |
| 24***62 | Valve Group-Solenoid; (Parking Brake) | 1 |
| 25***30 | Kit-Seal; (Valve) | 1 |
233-7131 Manifold & Solenoid Gp-Control -Parking Brake
| 09***68 | Bolt-Socket Head; (M5x0.8x8-mm) | 2 |
| 23***31 | Manifold & Solenoid Group-Control; -Parking Brake | 1 |
| 24***62 | Valve Group-Solenoid; (Parking Brake) | 1 |
208-5681 Manifold & Solenoid Gp-Control -Parking Brake
| 19***00 | Valve Group-Solenoid; -12-Volt-Work Tool | 1 |
| 20***81 | Manifold & Solenoid Group-Control; -Parking Brake | 1 |
| 21***61 | Flange | 1 |
218-5560 Manifold Gp-Return
| 10***93 | Poppet | 1 |
| 14***18 | Connector As | 1 |
| 14***27 | Connector Group | 2 |
190-7457 Motor & Mtg Gp-Hydrostatic -2-Speed
| 19***57 | Motor & Mtg Group-Hydrostatic; -2-Speed | 1 |
| 19***40 | Bolt-Carriage; (M16x2x65-mm) | 16 |
| 28***58 | Motor Group-Piston; -Hydrostatic | 2 |
191-9780 Motor & Mtg Gp-Hydrostatic
| 19***80 | Motor & Mtg Group-Hydrostatic | 1 |
| 19***40 | Bolt-Carriage; (M16x2x65-mm) | 16 |
| 22***62 | Motor Group-Piston; -Hydrostatic | 2 |
220-8172 Motor Gp-Piston
| 09***01 | Bolt-Socket Head; (M8x1.25x40-mm) | 2 |
| 14***13 | Shim; (0.01-mm Thk) | 1 |
| 14***14 | Shim; (0.3-mm Thk) | 1 |
280-7856 Motor Gp-Piston -Hydrostatic
| 03***53 | Seal-O-Ring; (08.92mm Id) | 1 |
| 03***42 | Seal-O-Ring; (11.89mm Id) | 1 |
| 14***13 | Shim; (0.01-mm Thk) | 1 |
280-7858 Motor Gp-Piston -Hydrostatic
| 03***53 | Seal-O-Ring; (08.92mm Id) | 1 |
| 03***42 | Seal-O-Ring; (11.89mm Id) | 1 |
| 14***13 | Shim; (0.01-mm Thk) | 1 |
220-8162 Motor Gp-Piston -Hydrostatic
| 03***53 | Seal-O-Ring; (08.92mm Id) | 1 |
| 14***13 | Shim; (0.01-mm Thk) | 1 |
| 14***14 | Shim; (0.3-mm Thk) | 2 |
218-0918 Mounting Gp-Pump
| 14***19 | Plate-Adapter | 1 |
| 21***18 | Mounting Group-Pump | 1 |
| 22***35 | Flange | 1 |
218-5800 Power Train Ar
| 19***60 | Drive Group-Tandem | 1 |
| 21***00 | Power Train Ar | 1 |
218-5600 Power Train Ar
| 14***60 | Drive Group-Tandem; -Work Tool | 1 |
| 21***00 | Power Train Ar | 1 |
218-5928 Pump & Mtg Gp-Hydrostatic
| 09***94 | Ring-Retaining | 1 |
| 16***42 | Washer-Hard; (14.8x27x3-mm Thk) | 2 |
| 16***39 | Bolt; (M14x2x40-mm) | 2 |
218-0928 Pump & Mtg Gp-Hydrostatic
| 09***94 | Ring-Retaining | 1 |
| 16***42 | Washer-Hard; (14.8x27x3-mm Thk) | 2 |
| 16***39 | Bolt; (M14x2x40-mm) | 2 |
289-6359 Pump Gp-Piston -Hydrostatic
| 08***98 | Bearing | 2 |
| 10***65 | Circlip | 2 |
| 12***59 | Bearing-Roller | 2 |
191-9700 Pump Gp-Piston -Hydrostatic
| 08***98 | Bearing | 2 |
| 10***65 | Circlip | 2 |
| 12***59 | Bearing-Roller | 2 |
191-9617 Pump Gp-Piston -Hydrostatic
| 10***07 | Cradle-Bearing | 20 |
| 10***09 | Bearing | 2 |
| 10***65 | Circlip | 2 |
289-6351 Pump Gp-Piston -Hydrostatic
| 08***98 | Bearing | 2 |
| 10***65 | Circlip | 2 |
| 12***59 | Bearing-Roller | 2 |
185-8677 Tire & Rim Gp -Rh
| 15***99 | Valve As-Tire | 1 |
| 18***77 | Tire & Rim Group; -Rh | 1 |
| 18***35 | Tire; (305-546) | 1 |
165-4901 Tire & Rim Gp -Heavy-Duty, Lh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 16***01 | Tire & Rim Group; -Heavy-Duty, Lh | 1 |
265-2900 Tire & Rim Gp -Lh
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 22***63 | Tire; (12-16.5) | 1 |
185-9928 Tire & Rim Gp -Lh
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***28 | Tire & Rim Group; -Lh | 1 |
265-2898 Tire & Rim Gp -Lh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 22***63 | Tire; (12-16.5) | 1 |
265-2901 Tire & Rim Gp -Rh
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 22***63 | Tire; (12-16.5) | 1 |
185-8676 Tire & Rim Gp -Lh
| 15***99 | Valve As-Tire | 1 |
| 18***76 | Tire & Rim Group; -Lh | 1 |
| 18***35 | Tire; (305-546) | 1 |
265-2899 Tire & Rim Gp -Rh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 22***63 | Tire; (12-16.5) | 1 |
154-3979 Tire & Rim Gp -Rh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 15***79 | Tire & Rim Group; -Rh | 1 |
228-9221 Tire & Rim Gp
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 22***69 | Tire; (12-R16.5) | 1 |
142-8737 Tire & Rim Gp -Rh
| 14***26 | Tire; (12-R16.5) | 1 |
| 14***31 | Wheel As | 1 |
| 14***37 | Tire & Rim Group; -Rh | 1 |
199-5439 Tire & Rim Gp -Rh
| 15***99 | Valve As-Tire | 1 |
| 17***70 | Wheel As | 1 |
| 19***39 | Tire & Rim Group; -Rh | 1 |
185-9931 Tire & Rim Gp -Rh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***31 | Tire & Rim Group; -Rh | 1 |
142-8738 Tire & Rim Gp
| 14***26 | Tire; (12-R16.5) | 1 |
| 14***38 | Tire & Rim Group; -Lh | 1 |
| 14***59 | Wheel As | 1 |
142-9025 Tire & Rim Gp
| 14***26 | Tire; (12-R16.5) | 1 |
| 14***59 | Wheel As | 1 |
| 14***25 | Tire & Rim Group; -Rh | 1 |
185-8674 Tire & Rim Gp -Lh
| 15***99 | Valve As-Tire | 1 |
| 18***74 | Tire & Rim Group; -Lh | 1 |
| 18***35 | Tire; (305-546) | 1 |
188-0124 Tire & Rim Gp -Lh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***33 | Tire; (12-16.5) | 1 |
165-4907 Tire & Rim Gp -Heavy-Duty, Rh
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 16***07 | Tire & Rim Group; -Heavy-Duty, Rh | 1 |
154-3978 Tire & Rim Gp -Lh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 15***78 | Tire & Rim Group; -Lh | 1 |
185-9930 Tire & Rim Gp -Lh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***30 | Tire & Rim Group; -Lh | 1 |
154-3980 Tire & Rim Gp
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 15***80 | Tire & Rim Group; -Lh | 1 |
185-8675 Tire & Rim Gp -Rh
| 15***99 | Valve As-Tire | 1 |
| 18***75 | Tire & Rim Group; -Rh | 1 |
| 18***35 | Tire; (305-546) | 1 |
188-0125 Tire & Rim Gp -Rh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***33 | Tire; (12-16.5) | 1 |
185-9929 Tire & Rim Gp -Rh
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***29 | Tire & Rim Group; -Rh | 1 |
199-5438 Tire & Rim Gp -Lh
| 15***99 | Valve As-Tire | 1 |
| 17***70 | Wheel As | 1 |
| 19***38 | Tire & Rim Group; -Lh | 1 |
165-4906 Tire & Rim Gp -Heavy-Duty, Lh
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 16***06 | Tire & Rim Group; -Heavy-Duty, Lh | 1 |
228-9220 Tire & Rim Gp
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 22***69 | Tire; (12-R16.5) | 1 |
154-3981 Tire & Rim Gp
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 15***81 | Tire & Rim Group; -Rh | 1 |
165-4902 Tire & Rim Gp -Heavy-Duty, Rh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 16***02 | Tire & Rim Group; -Heavy-Duty, Rh | 1 |
142-8728 Tire & Rim Gp -Lh
| 14***26 | Tire; (12-R16.5) | 1 |
| 14***28 | Tire & Rim Group; -Lh | 1 |
| 14***31 | Wheel As | 1 |
259-8194 Valve Gp-Solenoid
| 23***26 | Coil As | 1 |
| 25***94 | Valve Group-Solenoid; -Parking Brake | 1 |
252-0377 Wheel & Tire Ar -Solid
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 22***34 | Tire-Solid; (33x6x11)(Rh) | 2 |
| 22***35 | Tire-Solid; (33x6x11)(Rh) | 2 |
165-4898 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 16***98 | Wheel & Tire Ar; -Heavy Duty | 1 |
| 16***01 | Tire & Rim Group; -Heavy-Duty, Lh | 2 |
142-7494 Wheel & Tire Ar -Pneumatic
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 14***94 | Wheel & Tire Ar; -Pneumatic | 1 |
| 14***28 | Tire & Rim Group; -Lh | 2 |
154-3972 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 15***72 | Wheel & Tire Ar; -Heavy Duty | 1 |
| 15***78 | Tire & Rim Group; -Lh | 2 |
185-8663 Wheel & Tire Ar -Low Side Wall
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***63 | Wheel & Tire Ar; -Low Side Wall | 1 |
| 18***76 | Tire & Rim Group; -Lh | 2 |
228-9217 Wheel & Tire Ar
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 22***17 | Wheel & Tire Ar | 1 |
| 22***20 | Tire & Rim Group | 4 |
185-8662 Wheel & Tire Ar -Low Side Wall
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***62 | Wheel & Tire Ar; -Low Side Wall | 1 |
| 18***74 | Tire & Rim Group; -Lh | 2 |
185-8666 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***66 | Wheel & Tire Ar; -Heavy Duty | 1 |
| 18***28 | Tire & Rim Group; -Lh | 2 |
142-7495 Wheel & Tire Ar -Pneumatic
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 14***95 | Wheel & Tire Ar; -Pneumatic | 1 |
| 14***38 | Tire & Rim Group; -Lh | 2 |
252-0347 Wheel & Tire Ar
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 25***47 | Wheel & Tire Ar | 1 |
| 26***00 | Tire & Rim Group; -Lh | 2 |
178-2256 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 17***56 | Wheel & Tire Ar; -Heavy Duty | 1 |
| 19***38 | Tire & Rim Group; -Lh | 2 |
252-0346 Wheel & Tire Ar
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 25***46 | Wheel & Tire Ar | 1 |
| 26***98 | Tire & Rim Group; -Lh | 2 |
185-8667 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***67 | Wheel & Tire Ar; -Heavy Duty | 1 |
| 18***30 | Tire & Rim Group; -Lh | 2 |
165-4903 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 16***03 | Wheel & Tire Ar; -Heavy Duty | 1 |
| 16***06 | Tire & Rim Group; -Heavy-Duty, Lh | 2 |
252-0366 Wheel & Tire Ar -Solid
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 22***34 | Tire-Solid; (33x6x11)(Rh) | 2 |
| 22***35 | Tire-Solid; (33x6x11)(Rh) | 2 |
154-3973 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 15***73 | Wheel & Tire Ar; -Heavy Duty | 1 |
| 15***80 | Tire & Rim Group; -Lh | 2 |
159-5761 Wheel & Tire Ar -Solid
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 15***61 | Wheel & Tire Ar; -Solid | 1 |
| 18***30 | Tire-Solid; (33x6x8) | 4 |
228-9219 Wheel & Tire Ar
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 22***19 | Wheel & Tire Ar | 1 |
| 22***21 | Tire & Rim Group | 4 |
187-3239 Wheel & Tire Ar
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***39 | Wheel & Tire Ar | 1 |
| 18***24 | Tire & Rim Group; -Lh | 2 |
259-9892 Wheel & Tire Gp
| 22***34 | Tire-Solid; (33x6x11)(Rh) | 2 |
| 22***35 | Tire-Solid; (33x6x11)(Rh) | 2 |
| 25***92 | Wheel & Tire Group | 1 |
Service Equipment And Supplies
191-9684 Film Gp -Clearance
| 16***00 | Film-Warning; (Clearance) | 1 |
| 19***84 | Film Group; -Clearance | 1 |
295-7417 Film Gp -Two Speed
| 29***17 | Film Group; -Two Speed | 1 |
| 29***37 | Film-Identification; (Two Speed) | 2 |
218-6256 Film Gp
| 12***10 | Film; (Red Stripe)(Red Stripe - 1225 cm) | 0 |
| 16***89 | Film; (Caterpillar) | 1 |
| 21***56 | Film Group | 1 |
238-7734 Film Gp -Un
| 23***34 | Film Group; -Un | 1 |
| 25***15 | Film-Identification; (Un)(Front) | 1 |
| 25***16 | Film-Identification; (Un)(Side) | 2 |
218-6844 Film Gp -Kit
| 12***10 | Film; (Red Stripe)(Red Stripe - 1225 cm) | 0 |
| 15***62 | Film-Information; (Tie-Down Location) | 4 |
| 16***89 | Film; (Caterpillar) | 1 |
218-6253 Film Gp
| 12***10 | Film; (Red Stripe)(Red Stripe - 1225 cm) | 0 |
| 16***89 | Film; (Caterpillar) | 1 |
| 21***53 | Film Group | 1 |
218-6254 Film Gp
| 12***10 | Film; (Red Stripe)(Red Stripe - 1225 cm) | 0 |
| 16***89 | Film; (Caterpillar) | 1 |
| 21***54 | Film Group | 1 |
218-6842 Film Gp
| 12***10 | Film; (Red Stripe)(Red Stripe - 1225 cm) | 0 |
| 15***62 | Film-Information; (Tie-Down Location) | 4 |
| 16***89 | Film; (Caterpillar) | 1 |
218-6841 Film Gp -Kit
| 12***10 | Film; (Red Stripe)(Red Stripe - 1225 cm) | 0 |
| 15***62 | Film-Information; (Tie-Down Location) | 4 |
| 16***89 | Film; (Caterpillar) | 1 |
218-6845 Film Gp -Kit
| 12***10 | Film; (Red Stripe)(Red Stripe - 1225 cm) | 0 |
| 15***62 | Film-Information; (Tie-Down Location) | 4 |
| 16***89 | Film; (Caterpillar) | 1 |
218-6258 Film Gp
| 12***10 | Film; (Red Stripe)(Red Stripe - 1225 cm) | 0 |
| 16***89 | Film; (Caterpillar) | 1 |
| 21***58 | Film Group | 1 |
218-6291 Plate & Film Gp
| 15***62 | Film-Information; (Tie-Down Location) | 4 |
| 15***53 | Film-Information; (Read Omm) | 1 |
| 16***76 | Film; (Identification) (12v) (On Rear Console Behind Operators Seat) | 1 |
218-5911 Plate & Film Gp
| 15***62 | Film-Information; (Tie-Down Location) | 4 |
| 15***53 | Film-Information; (Read Omm) | 1 |
| 16***76 | Film; (Identification) (12v) (On Rear Console Behind Operators Seat) | 1 |
195-6740 Plate & Film Gp
| 19***40 | Plate & Film Group | 1 |
| 19***10 | Film-Identification; (Synthetic Hydraulic Oil, Read Omm) | 1 |
218-6292 Plate & Film Gp
| 15***62 | Film-Information; (Tie-Down Location) | 4 |
| 15***53 | Film-Information; (Read Omm) | 1 |
| 16***76 | Film; (Identification) (12v) (On Rear Console Behind Operators Seat) | 1 |
247-0678 Plate & Film Gp
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 15***35 | Film-Warning; (Crush Hazard, Stay Back) | 1 |
| 22***42 | Film-Warning; (Crush Hazard, Stay Back, U.S.) | 2 |
218-5951 Plate & Film Gp
| 15***62 | Film-Information; (Tie-Down Location) | 4 |
| 15***53 | Film-Information; (Read Omm) | 1 |
| 16***76 | Film; (Identification) (12v) (On Rear Console Behind Operators Seat) | 1 |
286-9251 Plate & Film Gp
| 16***89 | Tack-Fastener | 4 |
| 22***69 | Film-Warning; (Do Not Operate, Read Omm) | 1 |
| 24***18 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
Work Tools
216-8756 Arm Gp-Material Handling
| 15***62 | Film-Information; (Tie-Down Location) | 2 |
| 18***33 | Step Group-Material Handling Arm | 1 |
| 21***56 | Arm Group-Material Handling | 1 |
177-1989 Blade Ar -Angling
| 13***86 | Edge Group-Cutting | 1 |
| 17***81 | Blade Group-Angling | 1 |
| 17***83 | Spring Group-Blade | 1 |
231-5277 Blade Ar -Angling
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
231-5275 Blade Ar -Angling
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
177-1990 Blade Ar -Angling
| 14***41 | Edge Group-Cutting | 1 |
| 17***82 | Blade Group-Angling | 1 |
| 17***83 | Spring Group-Blade | 1 |
222-7412 Blade As-Angling
| 22***12 | Blade As-Angling | 1 |
| 22***21 | Trunnion As | 1 |
| 22***79 | Plate As | 1 |
230-4596 Blade As-Angling
| 22***21 | Trunnion As | 1 |
| 22***79 | Plate As | 1 |
| 22***28 | Plate As | 1 |
222-7724 Blade Gp-Angling
| 16***89 | Tack-Fastener | 4 |
| 22***12 | Blade As-Angling | 1 |
| 22***46 | Edge Group-Bit & Cutting | 1 |
177-1981 Blade Gp-Angling
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***40 | Pin | 2 |
| 16***19 | Pin As | 2 |
231-5276 Blade Gp-Angling
| 16***89 | Tack-Fastener | 4 |
| 22***45 | Edge Group-Bit & Cutting | 1 |
| 22***25 | Frame Group-Blade | 1 |
177-1982 Blade Gp-Angling
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***40 | Pin | 2 |
| 16***19 | Pin As | 2 |
279-5388 Blade Gp-Multipurpose Bucket
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***87 | Blade Group-Multipurpose Bucket | 1 |
279-5395 Blade Gp-Multipurpose Bucket
| 15***77 | Edge | 1 |
| 27***95 | Blade Group-Multipurpose Bucket | 1 |
279-5406 Blade Gp-Multipurpose Bucket
| 19***16 | Edge | 1 |
| 27***06 | Blade Group-Multipurpose Bucket | 1 |
159-5347 Blade Gp-Multipurpose Bucket
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***80 | Blade Group-Multipurpose Bucket | 1 |
| 15***47 | Blade Group-Multipurpose Bucket | 1 |
159-5345 Blade Gp-Multipurpose Bucket
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***45 | Blade Group-Multipurpose Bucket | 1 |
| 16***89 | Tack-Fastener | 4 |
279-5387 Blade Gp-Multipurpose Bucket
| 15***59 | Edge | 1 |
| 27***87 | Blade Group-Multipurpose Bucket | 1 |
279-5405 Blade Gp-Multipurpose Bucket
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***05 | Blade Group-Multipurpose Bucket | 1 |
279-5384 Blade Gp-Multipurpose Bucket
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***84 | Blade Group-Multipurpose Bucket | 1 |
154-5080 Blade Gp-Multipurpose Bucket
| 15***77 | Edge | 1 |
| 15***80 | Blade Group-Multipurpose Bucket | 1 |
279-5385 Blade Gp-Multipurpose Bucket
| 15***37 | Edge | 1 |
| 27***85 | Blade Group-Multipurpose Bucket | 1 |
279-5396 Blade Gp-Multipurpose Bucket
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***95 | Blade Group-Multipurpose Bucket | 1 |
293-0142 Blade Gp-Multipurpose Bucket
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 29***42 | Blade Group-Multipurpose Bucket | 1 |
279-5435 Bucket Ar-Dirt
| 13***83 | Edge Group-Cutting | 1 |
| 27***34 | Bucket As-Dirt | 1 |
| 27***35 | Bucket Ar-Dirt | 1 |
279-5441 Bucket Ar-Dirt
| 13***85 | Edge Group-Cutting | 1 |
| 27***40 | Bucket As-Dirt | 1 |
| 27***41 | Bucket Ar-Dirt | 1 |
285-6090 Bucket Ar-Dirt
| 13***86 | Edge Group-Cutting | 1 |
| 28***89 | Bucket As-Dirt | 1 |
| 28***90 | Bucket Ar-Dirt, Turbocharger | 1 |
268-4083 Bucket Ar-Dirt
| 13***87 | Edge Group-Cutting | 1 |
| 26***83 | Bucket Ar-Dirt | 1 |
| 26***84 | Bucket Group-Dirt | 1 |
279-5438 Bucket Ar-Dirt
| 13***84 | Edge Group-Cutting | 1 |
| 27***37 | Bucket As-Dirt | 1 |
| 27***38 | Bucket Ar-Dirt | 1 |
229-3426 Bucket Ar-General Purpose
| 14***99 | Tooth Group-Uni | 9 |
| 22***26 | Bucket Ar-General Purpose | 1 |
| 22***27 | Bucket As-General Purpose | 1 |
279-5365 Bucket Ar-General Purpose
| 13***84 | Edge Group-Cutting | 1 |
| 27***64 | Bucket As-General Purpose | 1 |
| 27***65 | Bucket Ar-General Purpose | 1 |
279-5366 Bucket Ar-General Purpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
279-5369 Bucket Ar-General Purpose
| 13***85 | Edge Group-Cutting | 1 |
| 27***68 | Bucket As-General Purpose | 1 |
| 27***69 | Bucket Ar-General Purpose | 1 |
279-5370 Bucket Ar-General Purpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
279-5374 Bucket Ar-General Purpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
296-8192 Bucket Ar-General Purpose
| 19***24 | Edge Group-Cutting | 1 |
| 29***70 | Bucket As-General Purpose; -High Capacity | 1 |
| 29***92 | Bucket Ar-General Purpose | 1 |
279-5377 Bucket Ar-General Purpose
| 13***87 | Edge Group-Cutting | 1 |
| 27***76 | Bucket As-General Purpose | 1 |
| 27***77 | Bucket Ar-General Purpose | 1 |
279-5373 Bucket Ar-General Purpose
| 13***86 | Edge Group-Cutting | 1 |
| 27***72 | Bucket As-General Purpose | 1 |
| 27***73 | Bucket Ar-General Purpose | 1 |
279-5378 Bucket Ar-General Purpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 9 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
157-7226 Bucket Ar-Grapple
| 13***84 | Edge Group-Cutting | 1 |
| 15***23 | Bucket Ar-Grapple | 1 |
| 15***26 | Bucket Ar-Grapple; -Industrial | 1 |
285-6104 Bucket Ar-Grapple
| 28***02 | Bucket Group-Utility | 1 |
| 28***04 | Bucket Ar-Grapple | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
285-6093 Bucket Ar-Grapple
| 28***93 | Bucket Ar-Grapple | 1 |
| 28***99 | Bucket Group-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
157-7227 Bucket Ar-Grapple
| 13***85 | Edge Group-Cutting | 1 |
| 15***24 | Bucket Ar-Grapple | 1 |
| 15***27 | Bucket Ar-Grapple; -Industrial | 1 |
157-7223 Bucket Ar-Grapple
| 15***84 | Bucket Group-Grapple; -Industrial | 1 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 15***12 | Cylinder Group-Grapple | 2 |
157-7225 Bucket Ar-Grapple -Industrial
| 15***86 | Bucket Group-Grapple; -Industrial | 1 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 15***12 | Cylinder Group-Grapple | 2 |
217-6229 Bucket Ar-Grapple
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***87 | Lines Group-Grapple; -Industrial | 1 |
| 21***28 | Bucket Group-Grapple | 1 |
286-9301 Bucket Ar-Grapple
| 28***44 | Bucket Group-Grapple | 1 |
| 28***48 | Mounting Group-Cylinder; -Grapple Bucket | 1 |
| 28***50 | Lines Group-Grapple | 1 |
217-6230 Bucket Ar-Grapple
| 13***87 | Edge Group-Cutting | 1 |
| 21***29 | Bucket Ar-Grapple | 1 |
| 21***30 | Bucket Ar-Grapple | 1 |
165-8780 Bucket Ar-Grapple -Utility
| 16***34 | Grapple & Cylinder Group-Utility | 1 |
| 16***78 | Bucket Group-Utility | 1 |
| 16***80 | Bucket Ar-Grapple; -Utility | 1 |
157-7224 Bucket Ar-Grapple
| 15***85 | Bucket Group-Grapple; -Industrial | 1 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 15***12 | Cylinder Group-Grapple | 2 |
165-8779 Bucket Ar-Grapple
| 16***34 | Grapple & Cylinder Group-Utility | 1 |
| 16***77 | Bucket Group-Utility | 1 |
| 16***79 | Bucket Ar-Grapple | 1 |
285-6111 Bucket Ar-Grapple
| 28***00 | Bucket Ar-Utility | 1 |
| 28***11 | Bucket Ar-Grapple | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
285-6112 Bucket Ar-Grapple
| 28***01 | Bucket Ar-Utility | 1 |
| 28***12 | Bucket Ar-Grapple | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
158-6095 Bucket Ar-Grapple
| 13***86 | Edge Group-Cutting | 1 |
| 15***25 | Bucket Ar-Grapple; -Industrial | 1 |
| 15***95 | Bucket Ar-Grapple; -Industrial | 1 |
286-9300 Bucket Ar-Grapple
| 28***48 | Mounting Group-Cylinder; -Grapple Bucket | 1 |
| 28***51 | Plate & Film Group | 1 |
| 28***78 | Bucket Group-Grapple | 1 |
279-5425 Bucket Ar-Light Material
| 13***87 | Edge Group-Cutting | 1 |
| 27***24 | Bucket As-Light Material | 1 |
| 27***25 | Bucket Ar-Light Material | 1 |
296-7597 Bucket Ar-Light Material
| 29***23 | Bucket As-Light Material, Wheel Disc | 1 |
| 29***97 | Bucket Ar-Light Material | 1 |
| 29***80 | Edge Group-Cutting | 1 |
279-5420 Bucket Ar-Light Material
| 13***86 | Edge Group-Cutting | 1 |
| 27***20 | Bucket Ar-Light Material | 1 |
| 27***21 | Bucket As-Light Material | 1 |
279-5430 Bucket Ar-Light Material
| 19***24 | Edge Group-Cutting | 1 |
| 27***29 | Bucket As-Light Material | 1 |
| 27***30 | Bucket Ar-Light Material | 1 |
279-5403 Bucket Ar-Multipurpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
| 16***36 | Cover Group-Lines | 1 |
279-5398 Bucket Ar-Multipurpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
| 16***36 | Cover Group-Lines | 1 |
279-5391 Bucket Ar-Multipurpose
| 13***85 | Edge Group-Cutting | 1 |
| 27***90 | Bucket Ar-Multipurpose | 1 |
| 27***91 | Bucket Ar-Multipurpose | 1 |
154-5010 Bucket Ar-Multipurpose
| 15***09 | Bucket Group-Multipurpose | 1 |
| 15***10 | Bucket Ar-Multipurpose | 1 |
| 15***11 | Mounting Group-Cylinder | 1 |
279-5392 Bucket Ar-Multipurpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
293-0139 Bucket Ar-Multipurpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
| 16***36 | Cover Group-Lines | 1 |
154-5048 Bucket Ar-Multipurpose
| 14***99 | Tooth Group-Uni | 8 |
| 15***08 | Bucket Ar-Multipurpose | 1 |
| 15***48 | Bucket Ar-Multipurpose | 1 |
154-5049 Bucket Ar-Multipurpose
| 13***86 | Edge Group-Cutting | 1 |
| 15***10 | Bucket Ar-Multipurpose | 1 |
| 15***49 | Bucket Ar-Multipurpose | 1 |
279-5401 Bucket Ar-Multipurpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 9 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
199-8321 Bucket Ar-Multipurpose
| 13***87 | Edge Group-Cutting | 1 |
| 19***20 | Bucket Ar-Multipurpose | 1 |
| 19***21 | Bucket Ar-Multipurpose | 1 |
279-5382 Bucket Ar-Multipurpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
| 16***36 | Cover Group-Lines | 1 |
279-5402 Bucket Ar-Multipurpose
| 13***87 | Edge Group-Cutting | 1 |
| 27***02 | Bucket Ar-Multipurpose | 1 |
| 27***03 | Bucket Ar-Multipurpose | 1 |
154-5004 Bucket Ar-Multipurpose
| 15***04 | Bucket Ar-Multipurpose | 1 |
| 15***05 | Bucket Group-Multipurpose | 1 |
| 15***11 | Mounting Group-Cylinder | 1 |
199-8320 Bucket Ar-Multipurpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
| 16***36 | Cover Group-Lines | 1 |
154-5047 Bucket Ar-Multipurpose
| 13***85 | Edge Group-Cutting | 1 |
| 15***08 | Bucket Ar-Multipurpose | 1 |
| 15***47 | Bucket Ar-Multipurpose | 1 |
296-8055 Bucket Ar-Multipurpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 9 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
279-5399 Bucket Ar-Multipurpose
| 13***86 | Edge Group-Cutting | 1 |
| 27***98 | Bucket Ar-Multipurpose | 1 |
| 27***99 | Bucket Ar-Multipurpose | 1 |
154-5045 Bucket Ar-Multipurpose
| 13***84 | Edge Group-Cutting | 1 |
| 15***04 | Bucket Ar-Multipurpose | 1 |
| 15***45 | Bucket Ar-Multipurpose | 1 |
154-5046 Bucket Ar-Multipurpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 15***04 | Bucket Ar-Multipurpose | 1 |
279-5380 Bucket Ar-Multipurpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
279-5381 Bucket Ar-Multipurpose
| 13***84 | Edge Group-Cutting | 1 |
| 27***81 | Bucket Ar-Multipurpose | 1 |
| 27***82 | Bucket Ar-Multipurpose | 1 |
154-5008 Bucket Ar-Multipurpose
| 15***07 | Bucket Group-Multipurpose | 1 |
| 15***08 | Bucket Ar-Multipurpose | 1 |
| 15***11 | Mounting Group-Cylinder | 1 |
296-8057 Bucket Ar-Multipurpose
| 19***24 | Edge Group-Cutting | 1 |
| 29***39 | Engine; - Assembly, Bucket Ar-Multipurpose | 1 |
| 29***57 | Bucket Ar-Multipurpose | 1 |
279-5390 Bucket Ar-Multipurpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
| 16***36 | Cover Group-Lines | 1 |
154-5050 Bucket Ar-Multipurpose
| 14***99 | Tooth Group-Uni | 8 |
| 15***10 | Bucket Ar-Multipurpose | 1 |
| 15***50 | Bucket Ar-Multipurpose | 1 |
279-5400 Bucket Ar-Multipurpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
199-8322 Bucket Ar-Multipurpose
| 14***99 | Tooth Group-Uni | 9 |
| 19***20 | Bucket Ar-Multipurpose | 1 |
| 19***22 | Bucket Ar-Multipurpose | 1 |
285-6101 Bucket Ar-Utility
| 13***86 | Edge Group-Cutting | 1 |
| 28***01 | Bucket Ar-Utility | 1 |
| 28***02 | Bucket Group-Utility | 1 |
285-6100 Bucket Ar-Utility
| 13***85 | Edge Group-Cutting | 1 |
| 28***99 | Bucket Group-Utility | 1 |
| 28***00 | Bucket Ar-Utility | 1 |
285-6095 Bucket Ar-Utility
| 13***84 | Edge Group-Cutting | 1 |
| 28***95 | Bucket Ar-Utility | 1 |
| 28***96 | Bucket Group-Utility | 1 |
141-6704 Bucket As-Dirt
| 14***04 | Bucket As-Dirt | 1 |
| 14***36 | Edge | 1 |
188-3526 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 18***16 | Bucket As-Dirt | 1 |
188-2716 Bucket As-Dirt
| 14***37 | Edge | 1 |
| 18***16 | Bucket As-Dirt | 1 |
165-6157 Bucket As-Dirt
| 14***04 | Bucket As-Dirt | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***57 | Bucket As-Dirt | 1 |
279-5437 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***36 | Bucket As-Dirt | 1 |
285-6089 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 28***88 | Bucket As-Dirt | 1 |
279-5433 Bucket As-Dirt
| 14***34 | Edge | 1 |
| 27***33 | Bucket As-Dirt | 1 |
279-5436 Bucket As-Dirt
| 14***35 | Edge | 1 |
| 27***36 | Bucket As-Dirt | 1 |
152-0227 Bucket As-Dirt
| 14***35 | Edge | 1 |
| 15***27 | Bucket As-Dirt | 1 |
285-6088 Bucket As-Dirt
| 14***37 | Edge | 1 |
| 28***88 | Bucket As-Dirt | 1 |
268-4089 Bucket As-Dirt
| 19***22 | Edge | 1 |
| 26***89 | Bucket As-Dirt | 1 |
279-5434 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***33 | Bucket As-Dirt | 1 |
279-5440 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***39 | Bucket As-Dirt | 1 |
279-5439 Bucket As-Dirt
| 14***36 | Edge | 1 |
| 27***39 | Bucket As-Dirt | 1 |
165-6156 Bucket As-Dirt
| 15***27 | Bucket As-Dirt | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***56 | Bucket As-Dirt | 1 |
279-5376 Bucket As-General Purpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***75 | Bucket As-General Purpose | 1 |
292-9270 Bucket As-General Purpose -High Capacity
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 29***70 | Bucket As-General Purpose; -High Capacity | 1 |
229-3428 Bucket As-General Purpose
| 22***28 | Bucket As-General Purpose | 1 |
| 22***32 | Edge | 1 |
199-7720 Bucket As-General Purpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 19***20 | Bucket As-General Purpose | 1 |
279-5364 Bucket As-General Purpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***63 | Bucket As-General Purpose | 1 |
279-5363 Bucket As-General Purpose
| 14***35 | Edge | 1 |
| 27***63 | Bucket As-General Purpose | 1 |
279-5368 Bucket As-General Purpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***67 | Bucket As-General Purpose | 1 |
279-5375 Bucket As-General Purpose
| 19***22 | Edge | 1 |
| 27***75 | Bucket As-General Purpose | 1 |
292-9271 Bucket As-General Purpose
| 22***32 | Edge | 1 |
| 29***71 | Bucket As-General Purpose, Cap | 1 |
229-3427 Bucket As-General Purpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 22***27 | Bucket As-General Purpose | 1 |
279-5372 Bucket As-General Purpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***71 | Bucket As-General Purpose | 1 |
165-6153 Bucket As-General Purpose
| 14***36 | Edge | 1 |
| 16***53 | Bucket As-General Purpose | 1 |
165-6154 Bucket As-General Purpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***54 | Bucket As-General Purpose | 1 |
| 16***89 | Tack-Fastener | 4 |
279-5367 Bucket As-General Purpose
| 14***36 | Edge | 1 |
| 27***67 | Bucket As-General Purpose | 1 |
279-5371 Bucket As-General Purpose
| 14***37 | Edge | 1 |
| 27***71 | Bucket As-General Purpose | 1 |
217-6227 Bucket As-Grapple
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 21***26 | Bucket As-Grapple | 1 |
156-0889 Bucket As-Grapple
| 14***37 | Edge | 1 |
| 15***89 | Bucket As-Grapple | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
156-0887 Bucket As-Grapple -Industrial
| 14***35 | Edge | 1 |
| 15***87 | Bucket As-Grapple; -Industrial | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
169-8943 Bucket As-Grapple
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***89 | Bucket As-Grapple | 1 |
| 16***89 | Tack-Fastener | 4 |
169-8941 Bucket As-Grapple -Industrial
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***87 | Bucket As-Grapple; -Industrial | 1 |
| 16***89 | Tack-Fastener | 4 |
217-6226 Bucket As-Grapple
| 16***30 | Plate-Identification; (Cat) | 2 |
| 19***22 | Edge | 1 |
| 21***26 | Bucket As-Grapple | 1 |
156-0888 Bucket As-Grapple
| 14***36 | Edge | 1 |
| 15***88 | Bucket As-Grapple | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
169-8942 Bucket As-Grapple -Industrial
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***88 | Bucket As-Grapple | 1 |
| 16***89 | Tack-Fastener | 4 |
279-5428 Bucket As-Light Material
| 22***82 | Edge | 1 |
| 27***28 | Bucket As-Light Material | 1 |
279-5421 Bucket As-Light Material
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***21 | Bucket As-Light Material | 1 |
164-7415 Bucket As-Light Material
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***15 | Bucket As-Light Material | 1 |
| 16***89 | Tack-Fastener | 4 |
164-7414 Bucket As-Light Material
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***14 | Bucket As-Light Material | 1 |
| 16***89 | Tack-Fastener | 4 |
292-9224 Bucket As-Light Material
| 29***24 | Bucket As-Light Material, Tyre/Tire, Tyre/Tire; Tire | 1 |
| 29***57 | Edge | 1 |
279-5424 Bucket As-Light Material
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***23 | Bucket As-Light Material | 1 |
279-5422 Bucket As-Light Material
| 14***37 | Edge | 1 |
| 27***22 | Bucket As-Light Material | 1 |
279-5423 Bucket As-Light Material
| 19***22 | Edge | 1 |
| 27***23 | Bucket As-Light Material | 1 |
279-5429 Bucket As-Light Material
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***28 | Bucket As-Light Material | 1 |
292-9223 Bucket As-Light Material
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 29***23 | Bucket As-Light Material, Wheel Disc | 1 |
220-4991 Bucket As-Light Material
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 22***91 | Bucket As-Light Material | 1 |
285-6097 Bucket As-Utility
| 14***35 | Edge | 1 |
| 28***97 | Bucket As-Utility | 1 |
285-6103 Bucket As-Utility
| 14***37 | Edge | 1 |
| 28***03 | Bucket As-Utility | 1 |
165-8837 Bucket As-Utility
| 14***35 | Edge | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
| 16***37 | Bucket As-Utility | 1 |
165-8832 Bucket As-Utility
| 11***83 | Boss; (M10x1.5-Thd) | 4 |
| 14***36 | Edge | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
165-8835 Bucket As-Utility
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***35 | Bucket As-Utility | 1 |
| 16***37 | Bucket As-Utility | 1 |
165-8747 Bucket As-Utility
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***47 | Bucket As-Utility | 1 |
| 16***33 | Bucket As-Utility | 1 |
285-6098 Bucket As-Utility
| 14***36 | Edge | 1 |
| 28***98 | Bucket As-Utility, Fuel Injection Pump; - Assembly | 1 |
165-8746 Bucket As-Utility
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***46 | Bucket As-Utility | 1 |
| 16***32 | Bucket As-Utility | 1 |
152-0231 Bucket Gp-Dirt
| 13***84 | Edge Group-Cutting | 1 |
| 15***31 | Bucket Group-Dirt | 1 |
| 16***56 | Bucket As-Dirt | 1 |
152-0232 Bucket Gp-Dirt
| 13***85 | Edge Group-Cutting | 1 |
| 15***32 | Bucket Group-Dirt | 1 |
| 16***57 | Bucket As-Dirt | 1 |
188-2719 Bucket Gp-Dirt
| 13***86 | Edge Group-Cutting | 1 |
| 18***19 | Bucket Group-Dirt | 1 |
| 18***26 | Bucket As-Dirt | 1 |
268-4084 Bucket Gp-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 26***84 | Bucket Group-Dirt | 1 |
152-0226 Bucket Gp-General Purpose
| 13***85 | Edge Group-Cutting | 1 |
| 15***26 | Bucket Group-General Purpose | 1 |
| 16***53 | Bucket As-General Purpose | 1 |
199-7726 Bucket Gp-General Purpose
| 13***87 | Edge Group-Cutting | 1 |
| 19***20 | Bucket As-General Purpose | 1 |
| 19***26 | Bucket Group-General Purpose | 1 |
229-3433 Bucket Gp-General Purpose
| 19***24 | Edge Group-Cutting | 1 |
| 22***27 | Bucket As-General Purpose | 1 |
| 22***33 | Bucket Group-General Purpose | 1 |
152-0228 Bucket Gp-General Purpose
| 14***99 | Tooth Group-Uni | 8 |
| 15***28 | Bucket Group-General Purpose | 1 |
| 16***54 | Bucket As-General Purpose | 1 |
152-0225 Bucket Gp-General Purpose
| 14***99 | Tooth Group-Uni | 8 |
| 15***25 | Bucket Group-General Purpose | 1 |
| 16***53 | Bucket As-General Purpose | 1 |
199-7727 Bucket Gp-General Purpose
| 14***99 | Tooth Group-Uni | 9 |
| 19***20 | Bucket As-General Purpose | 1 |
| 19***27 | Bucket Group-General Purpose | 1 |
152-0229 Bucket Gp-General Purpose
| 13***86 | Edge Group-Cutting | 1 |
| 15***29 | Bucket Group-General Purpose | 1 |
| 16***54 | Bucket As-General Purpose | 1 |
296-8191 Bucket Gp-General Purpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 9 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
156-0884 Bucket Gp-Grapple -Industrial
| 15***84 | Bucket Group-Grapple; -Industrial | 1 |
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
286-9244 Bucket Gp-Grapple
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 28***29 | Tine Group | 1 |
286-9278 Bucket Gp-Grapple
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 28***43 | Fork As | 2 |
217-6228 Bucket Gp-Grapple
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 21***27 | Bucket As-Grapple | 1 |
279-5359 Bucket Gp-Grapple -Industrial
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
156-0886 Bucket Gp-Grapple -Industrial
| 15***86 | Bucket Group-Grapple; -Industrial | 1 |
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
156-0885 Bucket Gp-Grapple -Industrial
| 15***85 | Bucket Group-Grapple; -Industrial | 1 |
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
164-7413 Bucket Gp-Light Material
| 13***87 | Edge Group-Cutting | 1 |
| 16***13 | Bucket Group-Light Material | 1 |
| 16***15 | Bucket As-Light Material | 1 |
164-7412 Bucket Gp-Light Material
| 13***86 | Edge Group-Cutting | 1 |
| 16***12 | Bucket Group-Light Material | 1 |
| 16***14 | Bucket As-Light Material | 1 |
220-4990 Bucket Gp-Light Material
| 19***24 | Edge Group-Cutting | 1 |
| 22***90 | Bucket Group-Light Material | 1 |
| 22***91 | Bucket As-Light Material | 1 |
154-5005 Bucket Gp-Multipurpose
| 14***32 | Clam As-Multipurpose Bucket | 1 |
| 15***05 | Bucket Group-Multipurpose | 1 |
| 15***12 | Pin | 2 |
279-5389 Bucket Gp-Multipurpose
| 15***12 | Pin | 2 |
| 15***53 | Clam As-Multipurpose Bucket | 1 |
| 27***88 | Blade Group-Multipurpose Bucket | 1 |
279-5404 Bucket Gp-Multipurpose
| 15***12 | Pin | 2 |
| 19***08 | Clam As-Multipurpose Bucket | 1 |
| 27***04 | Bucket Group-Multipurpose | 1 |
279-5397 Bucket Gp-Multipurpose
| 15***12 | Pin | 2 |
| 15***70 | Clam As-Multipurpose Bucket | 1 |
| 27***96 | Blade Group-Multipurpose Bucket | 1 |
279-5383 Bucket Gp-Multipurpose
| 14***32 | Clam As-Multipurpose Bucket | 1 |
| 15***12 | Pin | 2 |
| 27***83 | Bucket Group-Multipurpose | 1 |
293-0141 Bucket Gp-Multipurpose
| 15***12 | Pin | 2 |
| 29***41 | Bucket Group-Multipurpose | 1 |
| 29***42 | Blade Group-Multipurpose Bucket | 1 |
199-8319 Bucket Gp-Multipurpose
| 14***05 | Bearing-Sleeve | 4 |
| 15***12 | Pin | 2 |
| 15***38 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
154-5007 Bucket Gp-Multipurpose
| 14***05 | Bearing-Sleeve | 4 |
| 14***36 | Edge | 1 |
| 15***07 | Bucket Group-Multipurpose | 1 |
154-5009 Bucket Gp-Multipurpose
| 15***09 | Bucket Group-Multipurpose | 1 |
| 15***12 | Pin | 2 |
| 15***70 | Clam As-Multipurpose Bucket | 1 |
285-6102 Bucket Gp-Utility
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 28***02 | Bucket Group-Utility | 1 |
285-6096 Bucket Gp-Utility
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 28***96 | Bucket Group-Utility | 1 |
165-8836 Bucket Gp-Utility
| 11***83 | Boss; (M10x1.5-Thd) | 1 |
| 13***84 | Edge Group-Cutting | 1 |
| 13***94 | Edge-Cutting | 1 |
165-8777 Bucket Gp-Utility
| 11***83 | Boss; (M10x1.5-Thd) | 4 |
| 13***85 | Edge Group-Cutting | 1 |
| 13***95 | Edge-Cutting | 1 |
165-8778 Bucket Gp-Utility
| 13***86 | Edge Group-Cutting | 1 |
| 16***47 | Bucket As-Utility | 1 |
| 16***78 | Bucket Group-Utility | 1 |
285-6099 Bucket Gp-Utility
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 28***98 | Bucket As-Utility, Fuel Injection Pump; - Assembly | 1 |
242-9998 Carriage & Fork Ar
| 14***11 | Carriage As-Fork | 1 |
| 15***35 | Plate-Instruction; (Load Capacity) | 1 |
| 16***89 | Tack-Fastener | 4 |
293-9428 Carriage & Fork Ar
| 19***42 | Fork Group-Pallet | 2 |
| 26***81 | Carriage Group-Fork | 1 |
| 29***28 | Carriage & Fork Ar | 1 |
242-9999 Carriage & Fork Ar
| 14***11 | Carriage As-Fork | 1 |
| 15***35 | Plate-Instruction; (Load Capacity) | 1 |
| 16***89 | Tack-Fastener | 4 |
293-9429 Carriage & Fork Ar
| 19***45 | Fork Group-Pallet | 2 |
| 26***81 | Carriage Group-Fork | 1 |
| 29***29 | Carriage & Fork Ar | 1 |
243-0000 Carriage & Fork Ar
| 14***11 | Carriage As-Fork | 1 |
| 15***35 | Plate-Instruction; (Load Capacity) | 1 |
| 16***89 | Tack-Fastener | 4 |
293-9427 Carriage & Fork Ar
| 19***43 | Fork Group-Pallet | 2 |
| 26***81 | Carriage Group-Fork | 1 |
| 29***27 | Carriage & Fork Ar | 1 |
149-1411 Carriage As-Fork
| 14***11 | Carriage As-Fork | 1 |
261-6681 Carriage Gp-Fork
| 15***35 | Plate-Instruction; (Load Capacity) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 25***95 | Step As | 1 |
293-9426 Carriage Gp-Fork
| 26***81 | Carriage Group-Fork | 6 |
| 29***26 | Carriage Group-Fork | 1 |
154-5053 Clam As-Multipurpose Bucket
| 14***05 | Bearing-Sleeve | 4 |
| 14***36 | Edge | 1 |
| 15***53 | Clam As-Multipurpose Bucket | 1 |
154-5070 Clam As-Multipurpose Bucket
| 14***05 | Bearing-Sleeve | 4 |
| 14***37 | Edge | 1 |
| 15***70 | Clam As-Multipurpose Bucket | 1 |
199-8308 Clam As-Multipurpose Bucket
| 14***05 | Bearing-Sleeve | 4 |
| 15***38 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
| 16***30 | Plate-Identification; (Cat) | 2 |
293-0148 Clam As-Multipurpose Bucket
| 14***05 | Bearing-Sleeve | 4 |
| 16***30 | Plate-Identification; (Cat) | 2 |
| 22***32 | Edge | 1 |
149-4232 Clam As-Multipurpose Bucket
| 14***05 | Bearing-Sleeve | 4 |
| 14***32 | Clam As-Multipurpose Bucket | 1 |
| 14***35 | Edge | 1 |
296-0582 Conversion Gp-Work Tool -Kit, High Flow
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
218-6509 Coupler Ar-Quick
| 19***70 | Coupler Group-Quick | 1 |
| 21***17 | Lines Group-Lowering Control; -Manual | 1 |
| 21***09 | Housing, Coupler Ar-Quick | 1 |
218-6510 Coupler Ar-Quick
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 19***55 | Coupler Group-Quick; -Hydraulic | 1 |
| 21***21 | Switch As-Rocker; (Quick Coupler)(12-Volt) | 1 |
218-6521 Coupler Ar-Quick -Manual
| 19***70 | Coupler Group-Quick | 1 |
| 21***34 | Lines Group-Lowering Control; -Manual | 1 |
| 21***21 | Coupler Ar-Quick; -Manual | 1 |
218-6522 Coupler Ar-Quick -Hydraulic
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 19***55 | Coupler Group-Quick; -Hydraulic | 1 |
| 21***21 | Switch As-Rocker; (Quick Coupler)(12-Volt) | 1 |
192-2655 Coupler Gp-Quick -Hydraulic
| 12***01 | Plate-Retainer | 2 |
| 19***55 | Coupler Group-Quick; -Hydraulic | 1 |
| 20***85 | Pin | 2 |
196-8870 Coupler Gp-Quick
| 11***83 | Boss; (M10x1.5-Thd) | 6 |
| 12***01 | Plate-Retainer | 2 |
| 13***79 | Washer; (11x32x3-mm Thk) | 2 |
162-5236 Cover Gp-Lines
| 16***28 | Plate | 1 |
| 16***36 | Cover Group-Lines | 1 |
| 5C***53 | Bolt (M6x1.00x16mm); (M6x1x16mm Thk) | 5 |
215-3963 Cylinder & Link Gp-Coupler -Rh
| 19***40 | Cylinder Group-Hydraulic; -Coupler | 1 |
| 19***42 | Pin | 1 |
| 21***57 | Link Group-Coupler | 1 |
215-3962 Cylinder & Link Gp-Coupler -Lh
| 19***40 | Cylinder Group-Hydraulic; -Coupler | 1 |
| 19***42 | Pin | 1 |
| 21***57 | Link Group-Coupler | 1 |
222-7545 Edge Gp-Bit & Cutting
| 14***14 | Edge-Cutting | 1 |
| 22***45 | Edge Group-Bit & Cutting | 1 |
| 3F***08 | Bolt-Plow; (5/8-11x2.25-In) | 10 |
222-7546 Edge Gp-Bit & Cutting
| 14***88 | Edge-Cutting | 1 |
| 22***46 | Edge Group-Bit & Cutting | 1 |
| 3F***08 | Bolt-Plow; (5/8-11x2.25-In) | 13 |
135-9387 Edge Gp-Cutting
| 13***87 | Edge Group-Cutting | 1 |
| 13***97 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 11 |
296-7680 Edge Gp-Cutting
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 13 |
| 29***02 | Edge-Cutting | 1 |
| 29***80 | Edge Group-Cutting | 1 |
135-9384 Edge Gp-Cutting
| 13***84 | Edge Group-Cutting | 1 |
| 13***94 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 8 |
149-5741 Edge Gp-Cutting
| 14***41 | Edge Group-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 7 |
| 19***24 | Edge-Cutting | 1 |
135-9386 Edge Gp-Cutting
| 13***86 | Edge Group-Cutting | 1 |
| 13***96 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 11 |
195-7124 Edge Gp-Cutting
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 11 |
| 19***24 | Edge-Cutting | 1 |
| 19***24 | Edge Group-Cutting | 1 |
135-9383 Edge Gp-Cutting
| 13***83 | Edge Group-Cutting | 1 |
| 13***93 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 6 |
135-9385 Edge Gp-Cutting
279-5360 Fork Ar-Grapple -Industrial
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***14 | Fork Group-Grapple; -Industrial | 2 |
| 27***75 | Cylinder Group-Grapple; -Industrial | 2 |
163-4812 Fork Ar-Grapple
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 15***12 | Cylinder Group-Grapple | 2 |
| 16***87 | Lines Group-Grapple; -Industrial | 1 |
285-6115 Fork Ar-Grapple -Utility
| 28***10 | Fork Group-Grapple | 1 |
| 28***15 | Fork Ar-Grapple; -Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
162-8139 Fork Ar-Grapple
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 15***12 | Cylinder Group-Grapple | 2 |
| 16***87 | Lines Group-Grapple; -Industrial | 1 |
165-8727 Fork Ar-Grapple
| 16***27 | Fork Ar-Grapple; -Utility | 1 |
| 16***34 | Grapple & Cylinder Group-Utility | 1 |
| 25***25 | Fork Group-Utility | 1 |
279-5350 Fork Ar-Grapple -Industrial
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***14 | Fork Group-Grapple; -Industrial | 9 |
| 27***75 | Cylinder Group-Grapple; -Industrial | 2 |
165-8728 Fork Ar-Grapple
| 16***28 | Fork Ar-Grapple; -Utility | 1 |
| 16***34 | Grapple & Cylinder Group-Utility | 1 |
| 25***26 | Fork Group-Utility | 1 |
285-6114 Fork Ar-Grapple -Utility
| 28***05 | Fork Group-Utility | 1 |
| 28***14 | Fork Ar-Grapple; -Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
285-6110 Fork Gp-Grapple
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 9 |
| 28***10 | Fork Group-Grapple | 1 |
164-9614 Fork Gp-Grapple -Industrial
| 16***54 | Tine | 1 |
| 16***14 | Fork Group-Grapple; -Industrial | 1 |
| 3E***70 | Pin; (Spring) | 1 |
163-4811 Fork Gp-Grapple
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***11 | Fork Group-Grapple | 1 |
279-5351 Fork Gp-Grapple -Industrial
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
162-8140 Fork Gp-Grapple
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***40 | Fork Group-Grapple | 1 |
195-6943 Fork Gp-Pallet
| 19***43 | Fork Group-Pallet | 1 |
| 22***29 | Positioner Group-Fork | 1 |
195-6942 Fork Gp-Pallet
| 19***42 | Fork Group-Pallet | 1 |
| 22***29 | Positioner Group-Fork | 1 |
243-0003 Fork Gp-Pallet -Kit
| 19***45 | Fork Group-Pallet | 12 |
| 22***29 | Positioner Group-Fork | 1 |
| 24***03 | Fork Group-Pallet; -Kit | 1 |
243-0002 Fork Gp-Pallet -Kit
| 19***42 | Fork Group-Pallet | 12 |
| 22***29 | Positioner Group-Fork | 1 |
| 24***02 | Fork Group-Pallet; -Kit | 1 |
243-0001 Fork Gp-Pallet -Kit
| 19***43 | Fork Group-Pallet | 12 |
| 22***29 | Positioner Group-Fork | 1 |
| 24***01 | Fork Group-Pallet; -Kit | 1 |
195-8545 Fork Gp-Pallet
| 19***45 | Fork Group-Pallet | 1 |
| 22***29 | Positioner Group-Fork | 1 |
165-8732 Fork Gp-Utility
| 16***32 | Fork Group-Utility | 1 |
| 16***41 | Tine | 1 |
| 9R***59 | Clip | 1 |
165-8737 Fork Gp-Utility
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 9 |
| 16***37 | Fork Group-Utility | 1 |
252-8026 Fork Gp-Utility
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 9 |
| 25***26 | Fork Group-Utility | 1 |
285-6105 Fork Gp-Utility
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 7 |
| 28***05 | Fork Group-Utility | 1 |
252-8025 Fork Gp-Utility
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 7 |
| 25***25 | Fork Group-Utility | 1 |
165-8739 Fork Gp-Utility
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***39 | Fork Group-Utility | 1 |
165-8738 Fork Gp-Utility
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***38 | Fork Group-Utility | 1 |
165-8736 Fork Gp-Utility
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 7 |
| 16***36 | Fork Group-Utility | 1 |
230-5670 Frame Gp-Blade
| 17***14 | Pin As | 1 |
| 17***55 | Shim; (1-mm Thk) | 1 |
| 17***56 | Shim; (2-mm Thk) | 1 |
279-5358 Frame Gp-Fork -Industrial
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***89 | Tack-Fastener | 4 |
279-5352 Frame Gp-Fork -Industrial
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***89 | Tack-Fastener | 4 |
165-8734 Grapple & Cylinder Gp-Utility
| 16***95 | Cylinder Group-Grapple | 1 |
| 16***31 | Mounting Group-Cylinder; -Utility | 1 |
| 16***33 | Lines Group-Grapple | 1 |
285-6116 Grapple & Cylinder Gp-Utility
| 16***95 | Cylinder Group-Grapple | 1 |
| 16***31 | Mounting Group-Cylinder; -Utility | 1 |
| 16***40 | Grapple Group-Utility | 1 |
165-8740 Grapple Gp-Utility
| 15***11 | Pin | 4 |
| 15***35 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
| 16***40 | Grapple Group-Utility | 1 |
215-3961 Handle & Pin Gp-Coupler -Rh
| 16***60 | Pin-Spring | 1 |
| 19***42 | Pin | 1 |
| 21***59 | Handle Group-Coupler; -Rh | 1 |
215-3960 Handle & Pin Gp-Coupler -Lh
| 16***60 | Pin-Spring | 1 |
| 19***42 | Pin | 1 |
| 21***58 | Handle Group-Coupler; -Lh | 1 |
215-3958 Handle Gp-Coupler -Lh
| 19***37 | Plate | 1 |
| 19***54 | Pin-Spring | 2 |
| 21***58 | Handle Group-Coupler; -Lh | 1 |
215-3959 Handle Gp-Coupler -Rh
| 19***37 | Plate | 1 |
| 19***54 | Pin-Spring | 2 |
| 21***59 | Handle Group-Coupler; -Rh | 1 |
319-9480 Kit-Roading Plate & Mounting -Bucket
| 03***57 | Washer; (13x26x6-mm Thk) | 4 |
| 17***14 | Film-Stripe; (Reflective, Red, White) | 1 |
| 17***15 | Film; (Reflective)(Warning) | 1 |
177-9152 Kit-Roading Plate & Mounting -Bucket
| 03***57 | Washer; (13x26x6-mm Thk) | 2 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 17***53 | Plate | 2 |
215-3957 Link Gp-Coupler
| 19***37 | Plate | 1 |
| 19***38 | Bracket | 1 |
| 19***45 | Spring | 1 |
175-4238 Lock Gp-Quick Coupler -Mechanical
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***47 | Pin | 1 |
| 9R***01 | Pin-Cotter | 1 |
184-6098 Plate Gp-Roading -Rh
| 17***14 | Film-Stripe; (Reflective, Red, White) | 1 |
| 17***15 | Film; (Reflective)(Warning) | 1 |
| 17***51 | Plate As; (Rh) | 1 |
184-6097 Plate Gp-Roading -Lh
| 17***14 | Film-Stripe; (Reflective, Red, White) | 1 |
| 17***15 | Film; (Reflective)(Warning) | 1 |
| 17***50 | Plate As; (Lh) | 1 |
161-7290 Pump Gp-Diaphragm
| 16***63 | Motor-Electric; (12-Volt) | 1 |
| 16***90 | Pump Group-Diaphragm; -Water Spray-Water | 1 |
| 17***33 | Head-Pump | 1 |
247-6742 Pump Gp-Diaphragm
| 16***63 | Motor-Electric; (12-Volt) | 1 |
| 24***42 | Pump Group-Diaphragm; -Water Spray | 1 |
| 24***23 | Head-Pump | 1 |
177-1983 Spring Gp-Blade
| 17***41 | Spring | 4 |
| 17***73 | Plate As | 1 |
| 17***83 | Spring Group-Blade | 1 |
188-7733 Step Gp-Material Handling Arm
| 18***86 | Step As | 1 |
| 18***33 | Step Group-Material Handling Arm | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
173-7407 Stop Gp-Bucket -Utility
| 17***07 | Stop Group-Bucket; -Utility | 1 |
| 2S***08 | Washer-Retaining; (0.531x3.25x0.438-In Thk) | 2 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 1 |
116-2001 Strainer Gp-Water
| 11***01 | Strainer Group-Water | 1 |
| 11***14 | Screen; (Water Tank) | 1 |
| 11***15 | Gasket | 1 |
346-1834 Tank & Mtg Gp-Water -Kit
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 06***51 | Clamp | 2 |
| 09***12 | Clip | 2 |
233-5993 Tank & Mtg Gp-Water
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 09***12 | Clip | 2 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
252-0386 Tank & Mtg Gp-Water -Kit
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 06***51 | Clamp | 2 |
| 09***12 | Clip | 2 |
233-5992 Tank & Mtg Gp-Water
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 06***51 | Clamp | 2 |
| 09***12 | Clip | 2 |
166-2551 Tank Gp-Water
| 16***51 | Tank Group-Water | 1 |
| 19***06 | Cap As; (Water Tank) | 1 |
| 19***07 | Fitting-Drain | 1 |
141-4999 Tooth Gp-Uni
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 1 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
236B serial number reference
On the 236B the PIN/serial plate is a riveted metal ID plate mounted at the rear of the machine, typically on the left side near the rear, under or behind the lift-arm support - check that area first, then the rear frame/tail section generally if not visible, since plates can be painted over or worn. The plate stamps the full Product Identification Number; the first three characters are letters and form the serial prefix (e.g. HEN), which identifies the model, while the digits that follow are the individual unit's sequential production number used to pin down the exact build-spec break.
| Prefix | Identifies | Notes |
|---|---|---|
| HEN | Caterpillar 236B skid steer loader, full production run | Only PIN prefix documented for the 236B. A multi-model Cat parts manual (covering 236B/246B/252B/262B together) assigns each model its own distinct prefix, with HEN specifically tied to the 236B - this rules out the prefix being shared with a sibling model. Factory service literature splits the HEN range at approximately serial 06750: HEN00001-06749 covers the earlier build, HEN06750-and-up covers a later spec update. Both sub-ranges share the HEN prefix and the same base engine family. Engine fitted across the range is the Cat 3044C DIT, a 3.3 L (201 cu in) four-cylinder turbocharged direct-injection diesel, bore 94 mm (3.7 in), stroke 120 mm (4.7 in). On the later HEN06750-and-up build this same engine is sometimes listed under Cat's later naming convention as the C3.4 DIT - a name change, not a literal 3.4 L displacement change; displacement, bore, and stroke stay the same across both sub-ranges. Gross power is reported in the low-to-mid 70s hp (about 73-75 hp / 54-56 kW) and net power around 70-71 hp (52-53 kW) depending on source and build spec - treat as varying by sub-range rather than a confirmed precise jump. Cat's own spec sheet for the later build labels it '236B Series 2'; some third-party spec listings additionally show a 'Series 3'/'236B III' entry with nearly identical numbers to Series 2, which is not confirmed as a separately documented serial break and may just be a relisting of the same later-spec machine - don't treat it as a third sub-range. Production window is approximately 2004 to 2011. Plant/region code tied to HEN is not documented in available sources - confirm with dealer if needed. |
Frequently asked questions
What engine does the Cat 236B skid steer loader use?
A 3.3-3.4L four-cylinder turbocharged diesel, listed in Cat literature as both the 3044C DIT and C3.4 DIT. Net power runs about 70-71 hp (52-53 kW) and gross power about 73-75 hp, with the exact figure varying slightly by series.
What is the operating weight of the Cat 236B?
About 7,005-7,007 lb (3,180 kg), consistent across Series 1, Series 2, and Series 3. Rated operating capacity varies more, from 1,750 lb on early Series 1 units to 1,950 lb on Series 2/3, with a counterweight option pushing it higher.
What replaced the Cat 236B skid steer loader?
Caterpillar's Tier 4 Final 236D took over the nameplate after the B-series run ended, switching to a Cat C3.3B engine. The 236B itself went through three internal series updates (Series 1 through 3) between roughly 2004 and 2011 before that changeover.
What 236B owners discuss
What engine is actually in the Cat 236B, and does it have any cold-start quirks?
The 236B runs a turbocharged, direct-injection Cat diesel (the 3044C DIT), in the roughly 52 kW (70 hp) class and Tier 2 compliant. Don't confuse it with the naturally aspirated engine in the plain 236 or the updated engine used later in the 236B3 - those are different powerplants even though the model numbers look close. Cold starts take patience: glow-plug preheat time scales up as ambient temperature drops toward and below freezing, and in sub-freezing weather operators report cycling the glow plugs and cranking in repeated short bursts rather than holding the starter down continuously. Winter fuel gelling in the lines or filter is a separate, common cause of a no-start that can look like an electrical fault - run a winter fuel blend and confirm the fuel heater is working if the machine has one.
How does the 236B's drive/hydraulic system behave, and what commonly trips up the auxiliary hydraulics?
Drive comes from variable-displacement axial-piston pumps off the engine feeding the wheel motors in a closed loop - smooth and proportional when everything's healthy. Low battery voltage or a weak charging circuit can starve the electronic controls enough that hydraulics go dead with the engine still running, so check the battery and grounds before chasing the pump. For auxiliary (attachment) hydraulics that won't run a cutter, blower, or similar tool, owners report the fault is usually on the control side - detent/flow settings on the joystick, a stuck or unpowered solenoid, or a wiring fault - rather than the pump itself. System relief pressure on this class of machine runs roughly in the 3000-3500 psi (207-241 bar) range, though the exact setting varies by circuit and configuration.
Hydraulics won't engage and the boom and parking-brake lights are flashing together - what's going on?
That's the interlock circuit, not a pump failure. The system reads inputs from the seat switch and the armrest/bar (lap bar) switch before it will release the parking-brake solenoid and enable the loader and drive solenoids. If either switch, its wiring, or the safety relay is faulty, the machine locks out hydraulics and flashes the boom and parking-brake indicators together. Owners report the seatbelt buckle and seat switch are common weak points - confirm the belt is fully latched and the seat switch isn't sticking or corroded before assuming a bigger electrical fault. Because this circuit exists to keep the loader arms and drive from moving unexpectedly, have your dealer verify the interlock system after any repair rather than bypassing switches to get the machine moving.
What wears on the 236B's driveline, and what should an owner watch for?
Power reaches the wheels through chains on each side running in an oil bath inside the axle housings for continuous lubrication. Chain tension is adjustable through slots in the housing and needs periodic checking - a loose or dry chain wears fast and can eventually show up as a side-to-side pull or hesitation when starting off. The drive axles are forged and induction-hardened with a lip/outer seal arrangement specifically meant to keep wire and twine from wrapping the axle and destroying the seal, so that seal is worth inspecting on any machine that has worked around fencing, baling, or scrap material. On tires, operators working debris-heavy sites often move to solid, flat-proof tires rather than pneumatic, since punctures are a recurring complaint in that kind of duty cycle.
The hydraulic-temperature warning comes on but the fluid isn't actually hot - is that a real problem?
It can be a false alarm. Owners have chased this exact symptom with a working cooling fan, fresh fluid, and a fresh filter, and still get the warning light, which points to a faulty temperature sensor or sender rather than an actual overheat condition. Before replacing hydraulic components, check actual oil-cooler and reservoir temperature with an infrared thermometer and compare it against what the gauge or warning panel is reporting. If temperatures are genuinely climbing, reported causes include a misadjusted or failing main relief valve, contaminated fluid, or a cooling fan/core not moving enough air - confirm with a real temperature reading before condemning the sensor or the cooler.
Does it matter whether it's an original 236B or a 236B Series 2?
Yes, mainly for feel and cold-weather response. The Series 2 update brought pilot-operated joystick controls in place of the earlier control setup, revised pilot valving for quicker, less sluggish hydraulic response when the oil is cold, and part-throttle operation aimed at lower noise and better fuel use under partial load. Functionally they share the same platform and engine family, so reliability differences between the two are not significant - the Series 2 changes are mostly about operator comfort and cold-start hydraulic responsiveness, not a different drivetrain.
What should I check before buying a used Cat 236B?
Start with hours and how they were accumulated - a one-owner machine with more hours but consistent maintenance can be in better shape than a low-hour unit that sat neglected, so weigh hours against service history rather than hours alone. Start the engine cold if possible and watch for stalling, unusual noise, and exhaust color, since black, blue, or gray smoke all point to problems. Check hydraulic fluid clarity - dark or burnt-smelling fluid suggests neglect - inspect hoses for cracking or seepage, and cycle the loader arms and auxiliary hydraulics through full range watching for hesitation. Specific to this machine: confirm the seat and bar-switch interlocks actually cut hydraulics when released, since a bypassed or defeated switch is a red flag; check drive chain tension and listen for chain noise or slack; inspect axle seals for wire or twine damage; and verify the hydraulic temperature gauge tracks a real infrared reading rather than throwing false warnings. Have a dealer verify the interlock and parking-brake system before putting a used machine to work.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 236B part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.