Caterpillarskid steer loader
Caterpillar 236
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 236 is a compact, wheeled skid steer loader built from roughly 2000 to 2003 as one of Caterpillar's original skid steer loader models from when Cat first entered the segment. It runs a naturally aspirated Cat 3034C four-cylinder diesel of 2.96 L (181 cu in) displacement, rated at about 44 hp (33 kW) net flywheel power (roughly 59 hp / 44 kW gross) at 2600 rpm. Operating weight runs about 6,810-7,030 lb (3,090-3,190 kg), the spread reflecting tire and counterweight configuration, with a standard rated operating capacity of 1,750 lb (793 kg) that some configurations raise to about 1,850 lb (839 kg) with an optional counterweight. Cat offered it with standard-flow hydraulics (22 gpm / 83 L/min, roughly 3,300 psi / 230 bar relief), an enclosed ROPS/FOPS Level I cab, and the usual range of buckets and attachments. Caterpillar replaced the 236 with the turbocharged 236B in 2004, which was later updated as the 236B3, before the line was fully redesigned as the modern D-series 236D and 236D3.
Where the base 236 used its naturally aspirated 3034C, the 236B stepped up to a turbocharged Cat 3044C DIT engine for more power and a quicker torque curve, along with cab and control updates. The 236B3 carried that platform through further engine and emissions changes, and the eventual D-series machines replaced the architecture entirely with a Tier 4 Final turbocharged engine, revised hydraulics, and electronic controls. In the used and parts market, the original 236 still holds a niche as a simple, mechanically governed machine with no emissions aftertreatment or engine electronics to fail. Its chain-driven tandem-axle chassis and dual-pump hydrostatic drivetrain are shared architecture with same-era siblings from Cat's first skid steer lineup, which keeps wear parts and drivetrain know-how easier to source for a model that has otherwise been out of production for two decades.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 236 specifications
Engine
| Engine model | Cat 3034C, 4-cylinder naturally aspirated diesel |
| Gross power | 47 kW (63 hp) @ 2600 rpm |
| Net power | 44 kW (59 hp) |
| Net flywheel power (as published) | 33 kW (44 hp) |
| Displacement | 3.0 L (183 cu in) |
| Bore x stroke | 99 mm x 102 mm (3.9 in x 4.0 in) |
| Emissions tier | Not published for this early-2000s generation; predates the later Interim/Final Tier 4 D-series |
Weights
| Operating weight | 3,111-3,189 kg (6,860-7,030 lb) - figures vary by source/configuration |
| Rated operating capacity (standard) | 794 kg (1,750 lb) |
| Rated operating capacity (with optional counterweight) | 839 kg (1,850 lb) |
| Tipping load | 1,588 kg (3,500 lb) |
Dimensions
| Length with bucket | 3.60 m (11.8 ft) |
| Length without bucket | 2.80 m (9.19 ft) |
| Width over tires | 1.83 m (6.01 ft) |
| Height to top of cab | 2.09 m (6.87 ft) |
| Wheelbase | 1.13 m (3.73 ft) |
| Ground clearance | 229 mm (9.0 in) |
| Turning radius (center, incl. bucket) | 2.16 m (85.2 in) |
| Max lift height to hinge pin | 3.10 m (10.17 ft) |
Performance
| Max travel speed | 11.1 km/h (6.9 mph) |
| Rated/operating travel speed | 12.2 km/h (7.6 mph) |
| Breakout force, lift cylinder | 19.3 kN (4,344 lbf) |
| Breakout force, tilt cylinder | 23.4 kN (5,255 lbf) |
| Loader hydraulic pump flow | 83 L/min (22 gpm) |
| Loader hydraulic system pressure | 22.8 MPa (3,300 psi) |
| Standard bucket capacity | 0.46 m3 (0.6 yd3) |
Service capacities (summary)
| Fuel tank | 90 L (23.8 gal) |
| Hydraulic system (total) | 52 L (13.8 gal) |
| Engine oil (crankcase) | 6.8 L (1.8 gal) |
| Cooling system | 9.9 L (2.6 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
236 fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 7 L (1.8 US gal) | Cat DEO diesel engine oil (Cat DEO-ULS on machines serviced after the low-sulfur-fuel changeover), SAE 15W-40 for ambient 5 to 50°C (41 to 122°F), SAE 10W-30 for -18 to 40°C (0 to 104°F); Cat DEO Cold Weather SAE 0W-40 down to -40°C (-40°F) for extreme cold starts. Engine is the naturally aspirated Cat 3034 -- the turbocharged 3034T belongs to the 246/248, not the 236. |
| Cooling system | 10 L (2.6 US gal) | Cat DEAC (Diesel Engine Antifreeze/Coolant) or Cat ELC (Extended Life Coolant), ethylene-glycol base at 50% concentration in water for -37°C (-34°F) freeze protection; minimum 30% glycol required, 50% recommended. |
| Fuel tank | 90 L (23.8 US gal) | No. 2-D distillate diesel fuel meeting Cat's distillate-fuel specification; blend with No. 1-D in cold climates for better cold-flow. |
| Hydraulic tank | 35 L (9.2 US gal) | Cat HYDO Advanced 10 (SAE 10W), preferred for ambient -20 to 40°C (-4 to 104°F); step to SAE 20W or SAE 30 for warmer ranges. Cat TDTO is an accepted alternate oil type on this hydrostatic-drive skid steer platform. |
| Hydraulic system, total (tank, pumps, motors, lines) | 52 L (13.7 US gal) | Same Cat HYDO Advanced / Cat TDTO recommendation as the hydraulic tank line above; this circuit also serves as the hydrostatic drive charge circuit on this machine. |
| Chain case / final drive housing, each side | 7 L (1.8 US gal) per side | Consult this machine's own lube chart to confirm the exact chain-case fluid type; on this drivetrain platform it typically follows the engine-oil family (Cat DEO / Cat DEO-ULS, SAE 15W-40 or SAE 5W-40 by climate) rather than a gear oil or TDTO product, but confirm with your dealer for this exact serial range. |
| Grease (spec only) | n/a, service item only, no reservoir capacity | Cat Prime Application Grease (NLGI 2, lithium-complex base with 3% moly) is Cat's named recommendation for heavily loaded pin joints on skid steer loaders; Cat Extreme Application Grease is the upgrade choice for severe duty or cold climates. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 236 maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
Servicing the 236 beyond the schedule
Predictive Maintenance & Fluid Analysis
The 236 runs a mechanically governed Cat 3034C engine with no ECM, so there are no fault codes to lean on. Oil analysis and visual inspection carry the diagnostic load instead. Sample engine oil, hydraulic oil, and chain case oil at scheduled changes; metallic glitter in a hydraulic filter usually points to piston pump or drive motor wear before it fails outright. Track chain case oil condition closely, since the dual hydrostatic pump and chain final-drive layout depends on clean, correctly leveled oil at both ends.
Corrective & Common Repairs
Expect hydraulic leaks and sluggish lift-arm or tilt-cylinder response as the most common complaints on the 236. Check the relief valve setting and the hydraulic oil cooler for packed debris before condemning a pump. Cold starts can be hard on the naturally aspirated 3034C; check for air in the fuel system, a plugged filter, or worn injectors before replacing the injection pump. Loose or stretched drive chains cause wheel-speed mismatch and chain slap; retension them before they start hooking the sprockets.
Overhaul & Rebuild Points
High-hour 236s wear at the chain-driven final drives first: sprocket hook wear and stretched chains inside each tandem chain case are the standard rebuild point, along with the sealed, induction-hardened axle bearings behind them. The two variable-displacement hydrostatic pumps and matching drive motors are next in line, especially on machines that saw heavy loader-arm cycling. On the engine side, the mechanical injection pump and injectors on the naturally aspirated 3034C are the wear items to rebuild or bench-test, not the long block itself.
Seasonal & Environment Servicing
Cold climates need a block heater or ether-assist and a winter fuel blend to keep the naturally aspirated 3034C starting reliably, since it has no turbo boost to help. In wet or muddy ground, rinse and re-lubricate the exposed drive chains and chain cases often, so grit doesn't work into the links and accelerate stretch. In dusty or agricultural settings, shorten the primary and cab air filter service intervals below the standard hour marks, and clean the radiator and hydraulic cooler fins more often to prevent overheating.
236 common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 163-4465 | Filter-Fuel | Fuel system service | Check fitment → |
| 134-8726 | Filter Element As-Air | Air intake service | Check fitment → |
| 140-2334 | Filter Element As-Air | Air intake service | Check fitment → |
| 110-6326 | Filter Element As-Air | Air intake service | Check fitment → |
| 110-6331 | Filter Element As-Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
236 fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| No engine CID/FMI codes (Cat 3034 mechanical engine) | The base 236 runs the Cat 3034, a naturally aspirated, mechanically governed direct-injection diesel with no engine ECM. There is no electronic engine fault code set on this machine — only analog gauges and warning lamps for coolant temperature, oil pressure, and alternator charge. | Not applicable — mechanical fuel system, no engine sensors feeding a control module. | Diagnose engine complaints (no-start, overheating, low power) mechanically: check fuel supply/air in lines, injection pump timing, coolant level, and oil pressure switch rather than pulling an engine code. |
| CID 0070 (FMI 03 or 05) | Parking brake switch circuit fault reported by the machine interlock control module — FMI 03 is a short to a voltage source, FMI 05 is an open circuit. | Damaged or corroded wiring/connector at the park brake switch, or a failed switch itself; often shows up as a park brake lamp that stays on, flashes, or won't let the machine release brake. | Check the park brake switch and its harness/connector for damage or corrosion before replacing the switch; verify the fault clears with a jumper test at the switch connector. |
| CID 1190 (FMI 03 or 05) | Armrest/seat switch circuit fault on the interlock control module — voltage-above-normal (short) or open-circuit condition on the seat-down/armrest-down input. | Seat switch plunger sticking, cut or pinched wiring under the seat pan, or a corroded connector; commonly presents as a flashing armrest or park brake lamp and the machine refusing to move or run hydraulics. | Cycle the seat and armrest, inspect the switch and wiring routed under the seat base, and confirm continuity before condemning the control module. |
| CID 1184 (FMI 05 or 06) | Auxiliary hydraulic solenoid supply circuit fault — open circuit (05) or grounded/shorted-low circuit (06) on the power feed to the work-tool solenoid valve(s). | Blown fuse or failed relay for the auxiliary hydraulics circuit, chafed harness near the loader arm pivot, or a failed solenoid coil. | Check the auxiliary hydraulics fuse/relay first, then test solenoid coil resistance at the valve before tracing harness continuity back to the control module. |
| CID 1181 (FMI 05 or 06) | Auxiliary hydraulic solenoid #1 circuit fault — open or shorted-low condition on an individual work-tool solenoid output. | Failed solenoid coil, damaged connector at the valve, or a break in the wiring run from the control module to the valve bank. | Swap or bench-test the suspect coil, inspect the connector for corrosion, and check wiring continuity end to end. |
| High-flow aux hydraulic solenoid/switch group (CID 1183/1185/1186, if equipped) | Covers the second high-flow solenoid, its supply circuit, and the cab high-flow select switch on units built with the high-flow auxiliary hydraulics option. | Same wiring/coil failure modes as the standard aux hydraulic circuit — open or shorted circuit, or a failed select switch in the cab. | Confirm the machine actually has the high-flow option before chasing this circuit; then check the select switch and solenoid wiring the same way as the standard aux circuit. |
| Flashing park brake or armrest indicator lamp (no numeric readout) | On the base 236 dash, the interlock system's only on-machine indication is a flashing park brake or armrest lamp — it tells the operator an interlock circuit fault exists but does not display the CID/FMI itself. | Any of the interlock switch or solenoid circuit faults above (seat, armrest, park brake, aux hydraulic lockout). | Note which lamp is flashing and whether it's steady or intermittent, then connect Cat ET to the machine's diagnostic connector to pull the actual CID/FMI before further teardown. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
236 attachments & work tools
General-purpose & multi-purpose buckets
Standard loader bucket capacity is about 0.46 m3 (0.6 yd3), sized to the machine's roughly 790-840 kg (1,750-1,850 lb) rated operating capacity. Width runs near 1.7 m (66-68 in) for this frame class; exact width varies by configuration/series. A multi-purpose (4-in-1) bucket is offered for combined grading, dozing, and clamping work.
Pallet forks
Fork carriages/pallet forks are offered for palletized and bagged-material handling. Load rating tracks the machine's base or counterweighted operating capacity, so tine spacing and carriage width are matched to this small-frame class.
Augers
Auger drive heads for this hydraulic-flow class span light-to-moderate duty gerotor motors up through moderate-to-heavy duty single- and double-reduction planetary drives. Drive selection is matched to the standard-flow auxiliary circuit; heavier planetary-drive augers need more flow than the base circuit supplies.
Grapples
Industrial and utility grapple forks attach for handling brush, scrap, and loose material. They run off the auxiliary hydraulic circuit and are sized to the small-frame loader class.
Brooms / sweepers
Angle brooms and pickup/hopper brooms are offered for surface clearing and debris collection, driven off the standard auxiliary hydraulic circuit.
Grading and dozer blades
Grading and dozer blade attachments are available for site finishing and light dozing, sized to the loader's frame and lift capacity.
Coupler / mounting system
Work tools mount to the integral mechanical quick-coupler built into the lift arms, Caterpillar's own coupler design rather than a Bobcat-style unit. An optional hydraulic (powered) quick coupler lets the operator lock and release tools without leaving the cab.
Auxiliary hydraulic circuit
Standard auxiliary/loader hydraulic flow is about 83 L/min (22 gal/min) at roughly 22,750 kPa (3,300 psi), setting the practical ceiling for single-flow tools like augers and brooms. A high-flow auxiliary package exists across this loader class for higher-demand tools, but a confirmed flow rating for this specific model isn't documented in available literature - verify against the machine's own option sheet or with your dealer.
Counterweight option
A factory counterweight option is available, raising rated operating capacity from about 790 kg (1,750 lb) to roughly 840 kg (1,850 lb). It is typically specified to improve stability when running forks or other attachments that carry load further out front.
Operator / cab guarding
ROPS/FOPS cab protection is standard. A deluxe cab option adds rear and top windows, a headliner, and extra rear lighting, with glass or polycarbonate door and window choices for jobs where visibility protection matters when running debris-generating work tools.
All 236 assemblies by section
Every catalogued assembly group for the Caterpillar 236. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
142-8857 Air Cleaner Gp
| 11***17 | Valve-Dust; (Air Cleaner) | 1 |
| 13***26 | Filter Element As-Air; (Primary) | 1 |
| 14***31 | Air Cleaner Group | 1 |
142-8703 Air Cleaner Gp
| 11***26 | Filter Element As-Air; (Primary) | 1 |
| 11***31 | Filter Element As-Air; (Secondary) | 1 |
| 11***17 | Valve-Dust; (Air Cleaner) | 1 |
152-4893 Air Cleaner Gp
| 11***26 | Filter Element As-Air; (Primary) | 1 |
| 11***31 | Filter Element As-Air; (Secondary) | 1 |
| 11***17 | Valve-Dust; (Air Cleaner) | 1 |
183-7126 Air Cleaner Gp
| 14***03 | Air Cleaner Group | 1 |
| 18***26 | Air Cleaner Group | 1 |
| 5P***16 | Washer; (Hard) (8.8x20.5x2mm Thk) | 2 |
183-7127 Lines Gp-Air
| 15***30 | Indicator-Air Filter Change | 1 |
| 15***74 | Hose | 1 |
| 16***13 | Adapter As | 1 |
152-4895 Lines Gp-Air
| 14***19 | Elbow As | 1 |
| 15***30 | Indicator-Air Filter Change | 1 |
| 15***95 | Lines Group-Air | 1 |
152-4894 Lines Gp-Air
| 14***04 | Hose | 1 |
| 15***30 | Indicator-Air Filter Change | 1 |
| 15***94 | Lines Group-Air | 1 |
165-4961 Manifold Gp-Exhaust
| 16***27 | Manifold-Exhaust | 1 |
| 16***28 | Bolt | 8 |
| 16***61 | Manifold Group-Exhaust | 1 |
164-7624 Manifold Gp-Inlet
| 15***05 | Gasket-Manifold | 1 |
| 16***24 | Manifold Group-Inlet | 1 |
| 16***25 | Manifold As-Inlet | 1 |
253-4414 Muffler & Converter
| 25***14 | Muffler & Converter | 1 |
253-4413 Muffler & Converter
| 25***13 | Muffler & Converter | 1 |
142-9003 Muffler Gp
| 14***49 | Gasket | 1 |
| 14***44 | Muffler Group | 1 |
| 14***03 | Muffler Group | 1 |
142-8844 Muffler Gp
| 14***16 | Elbow As-Exhaust | 1 |
| 14***18 | Clamp-Pipe | 1 |
| 14***44 | Muffler Group | 1 |
159-5787 Muffler Gp
| 14***49 | Gasket | 1 |
| 14***15 | Muffler Group | 1 |
| 15***87 | Muffler Group | 1 |
142-8815 Muffler Gp
| 14***15 | Muffler Group | 1 |
| 14***18 | Clamp-Pipe | 1 |
| 14***20 | Muffler As | 1 |
173-0424 Turbocharger Gp
| 06***58 | Clamp-Hose | 2 |
| 10***54 | Nut | 3 |
| 10***14 | Clip | 2 |
Basic Engine
188-8692 Camshaft Gp
| 10***41 | Bolt; (M6x1x10-mm) | 2 |
| 15***62 | Plug | 1 |
| 15***64 | Key-Woodruff | 1 |
172-6740 Camshaft Gp
| 10***41 | Bolt; (M6x1x10-mm) | 2 |
| 15***66 | Gear As-Idler; (59-Teeth) | 1 |
| 15***67 | Bushing | 2 |
177-2392 Camshaft Gp
| 10***41 | Bolt; (M6x1x10-mm) | 2 |
| 15***66 | Gear As-Idler; (59-Teeth) | 1 |
| 15***67 | Bushing | 2 |
171-2824 Camshaft Gp
| 10***41 | Bolt; (M6x1x10-mm) | 2 |
| 15***60 | Bushing | 1 |
| 15***62 | Plug | 1 |
164-7623 Cover Gp-Front Housing
| 10***71 | Bolt | 2 |
| 10***87 | Bolt; (M10x1.5x85-mm) | 2 |
| 15***55 | Cover | 1 |
195-9243 Cover Gp-Valve Mechanism
| 06***06 | Plug | 2 |
| 10***75 | Seal | 3 |
| 10***05 | Bolt; (M8x1.25x110-mm) | 1 |
153-0115 Cover Gp-Valve Mechanism
| 06***06 | Plug | 1 |
| 10***75 | Seal | 3 |
| 15***04 | Hose; (Fumes Disposal) | 1 |
171-4663 Crankshaft Gp
| 15***91 | Kit-Bearing | 1 |
| 15***99 | Washer-Thrust | 2 |
| 15***01 | Gear-Crankshaft; (30-Teeth) | 1 |
173-1252 Crankshaft Gp
| 15***91 | Kit-Bearing | 1 |
| 15***99 | Washer-Thrust | 2 |
| 15***01 | Gear-Crankshaft; (30-Teeth) | 1 |
188-5104 Crankshaft Gp
| 15***91 | Kit-Bearing | 1 |
| 15***99 | Washer-Thrust | 2 |
| 15***01 | Gear-Crankshaft; (30-Teeth) | 1 |
176-2451 Crankshaft Gp
| 15***91 | Kit-Bearing | 1 |
| 15***99 | Washer-Thrust | 2 |
| 15***01 | Gear-Crankshaft; (30-Teeth) | 1 |
152-6554 Cylinder Block Gp
| 06***09 | Plug-Facing | 2 |
| 15***54 | Cylinder Block Group | 1 |
| 15***57 | Seal | 2 |
170-6666 Cylinder Block Gp
| 14***67 | Jet As-Piston Cooling | 4 |
| 14***49 | Dowel | 1 |
| 15***55 | Dowel | 2 |
188-5101 Cylinder Block Gp
| 15***55 | Dowel | 2 |
| 15***56 | Seal | 1 |
| 17***61 | Cylinder Block Group | 1 |
172-6261 Cylinder Block Gp
| 06***06 | Plug | 1 |
| 06***07 | Plug | 1 |
| 06***09 | Plug-Facing | 2 |
171-2792 Cylinder Block Gp
| 15***54 | Cylinder Block Group | 1 |
| 15***55 | Dowel | 2 |
| 15***56 | Seal | 1 |
205-5490 Cylinder Block Gp
| 06***06 | Plug | 2 |
| 06***07 | Plug | 1 |
| 06***09 | Plug-Facing | 2 |
176-2449 Cylinder Block Gp
| 14***67 | Jet As-Piston Cooling | 4 |
| 14***49 | Dowel | 1 |
| 15***55 | Dowel | 2 |
205-5491 Cylinder Block Gp
| 06***06 | Plug | 1 |
| 06***07 | Plug | 1 |
| 06***09 | Plug-Facing | 2 |
188-8632 Cylinder Head Gp
| 15***62 | Bolt-Cylinder Head; (M11x1.5x104-mm) | 14 |
| 15***63 | Bolt-Cylinder Head; (M11x1.5-Thd, M8x1.25-Thd) | 4 |
| 15***64 | Gasket-Cylinder Head | 1 |
172-6705 Cylinder Head Gp
| 15***62 | Bolt-Cylinder Head; (M11x1.5x104-mm) | 14 |
| 15***63 | Bolt-Cylinder Head; (M11x1.5-Thd, M8x1.25-Thd) | 4 |
| 15***64 | Gasket-Cylinder Head | 1 |
172-6704 Cylinder Head Gp
| 15***57 | Valve-Exhaust | 4 |
| 15***58 | Spring | 8 |
| 15***59 | Cap | 8 |
176-2460 Cylinder Head Gp
| 15***62 | Bolt-Cylinder Head; (M11x1.5x104-mm) | 14 |
| 15***63 | Bolt-Cylinder Head; (M11x1.5-Thd, M8x1.25-Thd) | 4 |
| 15***64 | Gasket-Cylinder Head | 1 |
171-2803 Cylinder Head Gp
| 15***62 | Bolt-Cylinder Head; (M11x1.5x104-mm) | 14 |
| 15***63 | Bolt-Cylinder Head; (M11x1.5-Thd, M8x1.25-Thd) | 4 |
| 15***64 | Gasket-Cylinder Head | 1 |
152-4858 Drain Gp-Engine Oil
| 15***58 | Drain Group-Engine Oil | 1 |
| 15***36 | Valve-Sampling | 1 |
| 5D***26 | Clamp-Band; (9/16 To 1 1/16) | 1 |
176-0759 Drive Gp-Accessory
| 03***93 | Cover | 1 |
| 10***71 | Bolt | 2 |
| 11***26 | Gasket | 1 |
166-3759 Fastener Gp-Engine
| 16***59 | Fastener Group-Engine | 1 |
| 16***60 | Clip | 2 |
234-9531 Fastener Gp-Engine
| 23***31 | Fastener Group-Engine | 1 |
| 4P***81 | Clip (For Use With 7.9mm Wide Tie Wrap) | 1 |
| 6I***00 | Bolt; (M10x1.5x16-mm) | 1 |
153-0077 Flywheel Gp
| 03***39 | Gear-Starter; (112-Teeth) | 1 |
| 15***72 | Flywheel As | 1 |
| 15***73 | Bolt | 8 |
153-1014 Housing Gp-Flywheel
| 10***57 | Plate | 1 |
| 15***13 | Dowel | 2 |
| 15***14 | Housing Group-Flywheel | 1 |
171-2823 Housing Gp-Front
| 10***51 | Bolt; (M8x1.25x65-mm) | 1 |
| 10***91 | Plug | 2 |
| 10***05 | Bolt; (M8x1.25x90-mm) | 1 |
172-6739 Housing Gp-Front
| 10***51 | Bolt; (M8x1.25x65-mm) | 1 |
| 10***53 | Stud | 2 |
| 10***91 | Plug | 2 |
177-2390 Housing Gp-Front
| 10***91 | Plug | 2 |
| 10***05 | Bolt; (M8x1.25x90-mm) | 1 |
| 11***70 | Stud | 2 |
188-8691 Housing Gp-Front
| 10***91 | Plug | 2 |
| 10***05 | Bolt; (M8x1.25x90-mm) | 1 |
| 11***70 | Stud | 2 |
153-0561 Lifting Gp-Engine
| 10***58 | Bolt; (M8x1.25x14-mm) | 4 |
| 15***61 | Lifting Group-Engine | 1 |
| 15***63 | Plate | 2 |
153-1176 Mounting Gp-Alternator
| 15***76 | Mounting Group-Alternator | 1 |
| 6I***54 | Bolt; (M10x1.5x70-mm) | 1 |
142-8850 Mounting Gp-Engine
| 12***80 | Locknut; (M12x1.75-Thd) | 1 |
| 14***50 | Mounting Group-Engine | 1 |
| 14***53 | Bracket As | 1 |
164-7613 Mounting Gp-Starting Motor
| 16***13 | Mounting Group-Starting Motor | 1 |
| 6I***64 | Stud; (M10x1.5x30-mm) | 3 |
178-6260 Pan Gp-Oil
| 10***71 | Bolt | 1 |
| 11***29 | Bolt; (M8x1.25x75-mm) | 2 |
| 11***63 | Bolt; (M8x1.25x12-mm) | 1 |
202-3185 Pan Gp-Oil
| 10***71 | Bolt | 1 |
| 11***63 | Bolt; (M8x1.25x12-mm) | 1 |
| 15***83 | Clip | 1 |
164-7614 Pan Gp-Oil
| 10***71 | Bolt | 1 |
| 11***29 | Bolt; (M8x1.25x75-mm) | 2 |
| 11***63 | Bolt; (M8x1.25x12-mm) | 1 |
202-0950 Pan Gp-Oil
| 10***71 | Bolt | 1 |
| 11***63 | Bolt; (M8x1.25x12-mm) | 1 |
| 15***83 | Clip | 1 |
137-6391 Piston & Rod Gp
| 13***91 | Piston & Rod Group | 1 |
| 15***29 | Kit-Piston Ring | 4 |
| 17***62 | Kit-Piston Ring; (0.5-mm Os) | 4 |
173-1253 Piston & Rod Gp
| 15***29 | Kit-Piston Ring | 4 |
| 16***90 | Rod As; (Connecting)(B) | 4 |
| 16***91 | Rod As; (Connecting)(D) | 4 |
176-2459 Piston & Rod Gp
| 15***29 | Kit-Piston Ring | 4 |
| 16***90 | Rod As; (Connecting)(B) | 4 |
| 16***91 | Rod As; (Connecting)(D) | 4 |
188-5105 Piston & Rod Gp
| 15***29 | Kit-Piston Ring | 4 |
| 16***90 | Rod As; (Connecting)(B) | 4 |
| 16***91 | Rod As; (Connecting)(D) | 4 |
153-0693 Plug Gp-Cylinder Block
| 06***24 | Plug | 1 |
| 15***93 | Plug Group-Cylinder Block | 1 |
153-0567 Plug Gp-Flywheel Housing
| 15***67 | Plug Group-Flywheel Housing | 1 |
| 6H***16 | Plug-Protective | 8 |
153-0319 Pulley Gp-Crankshaft
| 15***14 | Washer | 1 |
| 15***17 | Screw | 1 |
| 15***19 | Pulley Group-Crankshaft | 1 |
172-6711 Valve Mechanism Gp
| 03***62 | Plug | 2 |
| 15***72 | Rocker Arm As | 1 |
| 15***73 | Shaft As-Rocker Arm | 1 |
171-2808 Valve Mechanism Gp
| 03***62 | Plug | 2 |
| 15***72 | Rocker Arm As | 1 |
| 15***73 | Shaft As-Rocker Arm | 1 |
176-9418 Valve Mechanism Gp
| 03***62 | Plug | 1 |
| 15***72 | Rocker Arm As | 1 |
| 15***78 | Nut | 8 |
188-8681 Valve Mechanism Gp
| 03***62 | Plug | 2 |
| 15***72 | Rocker Arm As | 1 |
| 15***73 | Shaft As-Rocker Arm | 1 |
Cooling System
164-7622 Connection Gp-Water
| 12***99 | Bolt; (M10x1.5x40-mm) | 2 |
| 16***22 | Connection Group-Water | 1 |
| 17***87 | Connector | 1 |
173-0410 Cooler Gp-Fltr Base & Eng Oil
| 11***45 | Connector | 1 |
| 16***21 | Bolt | 1 |
| 17***10 | Cooler Group-Filter Base & Eng Oil | 1 |
142-8864 Fan Gp-Blower
| 14***64 | Fan Group-Blower | 1 |
| 14***65 | Fan As | 1 |
| 14***70 | Adapter | 1 |
142-8873 Fan Gp-Blower
| 14***39 | Fan As | 1 |
| 14***70 | Adapter | 1 |
| 14***73 | Fan Group-Blower | 1 |
164-7633 Plug Gp-Water Lines
| 16***33 | Plug Group-Water Lines | 1 |
| 7M***10 | Plug 9.53mm(.375in.)Pipe Thd. | 1 |
153-0165 Pump Gp-Water
| 10***53 | Stud | 4 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
| 12***36 | Clamp-Hose | 2 |
173-1281 Pump Gp-Water
| 10***53 | Stud | 4 |
| 12***15 | Bolt; (M8x16x1.25-mm) | 1 |
| 12***36 | Clamp-Hose | 2 |
165-4910 Radiator & Hyd Oil Cooler Gp
| 06***80 | Fitting | 1 |
| 12***27 | Cap As-Radiator | 1 |
| 14***61 | Radiator & Hydraulic Oil Cooler As | 1 |
180-2997 Radiator & Hyd Oil Cooler Gp
| 06***80 | Fitting | 1 |
| 12***27 | Cap As-Radiator | 1 |
| 14***71 | Shroud As | 1 |
192-2602 Radiator & Hyd Oil Cooler Gp
| 06***80 | Fitting | 1 |
| 12***27 | Cap As-Radiator | 1 |
| 14***61 | Radiator & Hydraulic Oil Cooler As | 1 |
192-2604 Radiator & Hyd Oil Cooler Gp
| 06***80 | Fitting | 1 |
| 12***27 | Cap As-Radiator | 1 |
| 14***71 | Shroud As | 1 |
142-8878 Radiator & Hyd Oil Cooler Gp
| 06***80 | Fitting | 1 |
| 12***27 | Cap As-Radiator | 1 |
| 14***71 | Shroud As | 1 |
142-8877 Radiator & Oil Cooler Mtg Gp
| 12***64 | Clamp-Hose; (.76mm Id) | 3 |
| 14***33 | Spacer; (11x14.3x9-mm Thk)(11x14.3x9mm Thk) | 1 |
| 14***66 | Recovery Group-Coolant | 1 |
154-3990 Radiator & Oil Cooler Mtg Gp
| 12***64 | Clamp-Hose; (.76mm Id) | 3 |
| 14***33 | Spacer; (11x14.3x9-mm Thk)(11x14.3x9mm Thk) | 1 |
| 14***66 | Recovery Group-Coolant | 1 |
192-2603 Radiator & Oil Cooler Mtg Gp
| 12***64 | Clamp-Hose; (.76mm Id) | 4 |
| 14***33 | Spacer; (11x14.3x9-mm Thk)(11x14.3x9mm Thk) | 1 |
| 14***66 | Recovery Group-Coolant | 1 |
180-2998 Radiator & Oil Cooler Mtg Gp
| 12***64 | Clamp-Hose; (.76mm Id) | 4 |
| 14***33 | Spacer; (11x14.3x9-mm Thk)(11x14.3x9mm Thk) | 1 |
| 14***66 | Recovery Group-Coolant | 1 |
192-2601 Radiator & Oil Cooler Mtg Gp
| 12***64 | Clamp-Hose; (.76mm Id) | 4 |
| 14***33 | Spacer; (11x14.3x9-mm Thk)(11x14.3x9mm Thk) | 1 |
| 14***66 | Recovery Group-Coolant | 1 |
Electrical And Starting System
3e-7584 Lamp Gp-Head & Signal -Rh
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 18***10 | Lamp; (12-Volt)(Miniature) | 2 |
| 3E***84 | Lamp Group-Head & Turn; -Rh | 1 |
203-5492 Alternator Gp-Charging
| 11***58 | Pulley-Alternator | 1 |
| 11***65 | Kit-Alternator Bearing | 1 |
| 11***66 | Kit-Repair; (Alternator Brushes) | 1 |
142-9108 Alternator Gp-Charging
| 10***99 | Bolt-Socket Head; (M10x1.5x120-mm) | 1 |
| 10***79 | Bolt-Socket Head; (M10x1.5x90-mm) | 1 |
| 10***59 | Spacer; (13.5-mm Thk) | 1 |
142-7496 Battery Gp -Standard
| 14***96 | Battery Group; -Standard | 1 |
| 15***56 | Battery; (12-Volt, Maintenance Free)(24 V) | 1 |
| 19***29 | Clamp | 1 |
142-7520 Battery Gp -Heavy Duty
| 11***22 | Battery Group; (12-Volt, Maintenance Free, Wet) | 1 |
| 14***20 | Battery Group; -Heavy Duty | 1 |
| 19***29 | Clamp | 1 |
154-4233 Control Gp-Interlock
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 15***33 | Control Group-Interlock | 1 |
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
159-5780 Cover Gp-Fuse Panel
| 10***43 | Seal; (32-cm Each) | 0 |
| 11***71 | Puller-Minifuse | 1 |
| 11***89 | Retainer; (Stud) | 4 |
153-0524 Glow Plug Gp
| 15***24 | Glow Plug Group | 1 |
| 15***08 | Cord As-Heater | 1 |
| 16***74 | Element As-Jacket Water Heater; (Engine) | 1 |
168-7575 Heater Gp-Jacket Water
| 16***75 | Heater Group-Jacket Water | 1 |
| 3E***54 | Bolt; (M8x1.25x20-mm) | 1 |
| 6V***89 | Locknut; (M8x1.25-Thd) | 2 |
142-8637 Lamp Gp-Flood
| 14***37 | Lamp Group-Flood | 1 |
| 3E***54 | Bolt; (M8x1.25x20-mm) | 1 |
| 6V***89 | Locknut; (M8x1.25-Thd) | 2 |
168-6410 Lamp Gp-Flood
| 10***46 | Lamp; (12-Volt, 4-Watt)(Miniature) | 1 |
| 10***47 | Body As-Lamp | 1 |
| 10***48 | Lens As; (Headlight)(High, Low Beam) | 1 |
144-9933 Lamp Gp-Panel Illumination -Backlight
| 08***48 | Lamp; (12-Volt, 5-Watt) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 14***33 | Lamp Group-Panel Illumination; -Backlight | 1 |
142-7503 Lamp Gp-Stop & Tail
| 08***48 | Lamp; (12-Volt, 5-Watt) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 14***03 | Lamp Group-Stop & Tail; -12-Volt | 1 |
142-8634 Lamp Gp-Stop & Tail
| 14***34 | Lamp Group-Stop & Tail; -Stop, Tail | 1 |
| 9R***42 | Plug As | 1 |
| 9R***58 | Cord As | 1 |
128-6985 Lamp Gp-Warning Beacon -Amber, Magnetic Mount, Rotating
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 14***50 | Lighting Group-Front | 1 |
| 14***52 | Lighting Group-Stop & Tail | 1 |
169-6689 Lighting Ar-Stop & Flood
| 14***37 | Lamp Group-Flood | 2 |
| 16***89 | Lighting Ar-Stop & Flood | 1 |
| 9D***08 | Grommet | 2 |
142-8650 Lighting Gp-Front
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***50 | Lighting Group-Front | 1 |
| 14***26 | Switch As-Rocker; (Rear Working Lamp) | 1 |
142-9395 Lighting Gp-Rear
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 14***34 | Lamp Group-Stop & Tail; -Stop, Tail | 2 |
| 14***95 | Lighting Group-Rear | 1 |
187-0982 Lighting Gp-Roading
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
158-6710 Lighting Gp-Roading
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
203-4331 Lighting Gp-Roading
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***15 | Relay As; (12-Volt)(Junction Box) | 1 |
180-3009 Lighting Gp-Stop
| 14***03 | Lamp Group-Stop & Tail; -12-Volt | 2 |
| 18***09 | Lighting Group-Stop | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
142-8652 Lighting Gp-Stop & Tail
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 14***52 | Lighting Group-Stop & Tail | 1 |
142-8653 Lighting Gp-Warning Beacon
| 12***97 | Screw-Pan Head; (No 8-32x0.375-In) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 14***53 | Lighting Group-Warning Beacon; -12-Volt | 1 |
178-2254 Electronics Gp-Implement
| 16***58 | Cable | 3 |
| 17***59 | Plug-Glow | 4 |
| 17***54 | Service Group-Work Tool | 1 |
153-0564 Solenoid Gp-Shutoff
| 15***64 | Solenoid Group-Shutoff; -Fuel Injection | 1 |
| 15***66 | Gasket | 1 |
| 17***09 | Solenoid As; (Shutoff)(Fuel) | 1 |
173-1338 Solenoid Gp-Shutoff
| 15***66 | Gasket | 1 |
| 17***09 | Solenoid As; (Shutoff)(Fuel) | 1 |
| 17***38 | Solenoid Group-Shutoff; -Fuel Injection | 1 |
152-4886 Starting Aid Gp
| 11***15 | Relay As; (12-Volt)(Junction Box) | 1 |
| 15***86 | Starting Aid Group | 1 |
| 15***83 | Harness As | 1 |
144-9955 Starting Motor Gp-Electric
| 10***85 | Cap-Starting Motor | 1 |
| 10***12 | Kit-Contact; (Starting Motor) | 1 |
| 10***18 | Case As-Starting Motor | 1 |
154-3995 Starting Motor Gp-Electric
| 14***55 | Starting Motor Group-Electric | 1 |
| 15***95 | Starting Motor Group-Electric | 1 |
| 4P***34 | Clip-Ladder; (00800 mm ) | 1 |
168-7908 Switch Gp-Magnetic -Main Power, Propel Sensor
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***08 | Switch Group-Magnetic; -Main Power, Propel Sensor | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
171-4613 Switch Gp-Pressure -Engine Oil
| 06***07 | Plug | 1 |
| 15***62 | Adaptor | 1 |
| 17***13 | Switch Group-Pressure; -Engine Oil | 1 |
184-1564 Switch Gp-Pressure -Brake Light
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***64 | Switch Group-Pressure; -Brake Light | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
164-8388 Switch Gp-Temperature -Water
| 06***45 | Washer-(640mm Id, .064 Thk.) | 1 |
| 15***52 | Switch-Water Temperature | 1 |
| 16***88 | Switch Group-Temperature; -Water | 1 |
142-8656 Warning Gp-Backup
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***90 | Fuse; (10 Amp) | 1 |
| 14***56 | Warning Group-Backup | 1 |
142-9398 Wiring Gp-Cab
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***27 | Screw-Machine; (M6x1x30-mm) | 4 |
142-9107 Wiring Gp-Electronic Control
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***90 | Fuse; (10 Amp) | 1 |
| 14***05 | Harness As | 1 |
142-9396 Wiring Gp-Engine
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***15 | Relay As; (12-Volt)(Junction Box) | 2 |
| 11***73 | Clip As-Connecting | 1 |
142-9397 Wiring Gp-Machine
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 5 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 3 |
187-1258 Wiring Gp-Work Tool
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 2 |
| 10***42 | Diode Group | 1 |
| 11***60 | Strap | 1 |
159-5784 Wiring Gp-Work Tool
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 10***42 | Diode Group | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
193-8353 Wiring Gp-Work Tool
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 2 |
| 10***42 | Diode Group | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
Engine Arrangement
147-1234 Engine Ar-Primary
| 14***34 | Engine Ar-Primary | 1 |
| 15***77 | Flywheel Group | 1 |
| 15***19 | Pulley Group-Crankshaft | 1 |
159-9214 Engine Ar-Primary
| 15***77 | Flywheel Group | 1 |
| 15***19 | Pulley Group-Crankshaft | 1 |
| 15***24 | Glow Plug Group | 1 |
147-1233 Engine Ar-Primary
| 13***91 | Piston & Rod Group | 1 |
| 14***33 | Engine Ar-Primary | 1 |
| 15***77 | Flywheel Group | 1 |
180-2999 Installation Ar-Engine
| 14***50 | Mounting Group-Engine | 1 |
| 14***08 | Alternator Group-Charging | 1 |
| 15***58 | Drain Group-Engine Oil | 1 |
183-7125 Installation Ar-Engine
| 14***50 | Mounting Group-Engine | 1 |
| 14***77 | Radiator & Oil Cooler Mtg Group | 1 |
| 14***08 | Alternator Group-Charging | 1 |
154-3994 Installation Ar-Engine
| 14***50 | Mounting Group-Engine | 1 |
| 14***57 | Air Cleaner Group | 1 |
| 14***03 | Muffler Group | 1 |
142-9005 Installation Ar-Engine
| 14***50 | Mounting Group-Engine | 1 |
| 14***77 | Radiator & Oil Cooler Mtg Group | 1 |
| 14***05 | Installation Ar-Engine | 1 |
142-9101 Installation Ar-Engine
| 14***50 | Mounting Group-Engine | 1 |
| 14***03 | Muffler Group | 1 |
| 14***01 | Installation Ar-Engine | 1 |
Frame And Body
154-4000 Bumper Gp -Rear
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 15***00 | Bumper Group; -Rear | 1 |
| 18***26 | Tire & Rim Group; -Lh | 2 |
188-3306 Conversion Ar-Roading -Europe
| 14***80 | Coupler Group-Quick | 1 |
| 14***01 | Installation Ar-Engine | 1 |
| 14***10 | Lifting Group-Machine; -4-Point | 1 |
188-3311 Conversion Ar-Roading -Untied Kingdom
| 10***03 | Restrainer | 1 |
| 14***80 | Coupler Group-Quick | 1 |
| 14***01 | Installation Ar-Engine | 1 |
188-3310 Conversion Ar-Roading -United Kingdom
| 15***10 | Lighting Group-Roading | 1 |
| 17***13 | Box Group-Storage | 1 |
| 17***22 | Visor Group-Cab | 1 |
188-3314 Conversion Ar-Roading
| 10***03 | Restrainer | 1 |
| 14***80 | Coupler Group-Quick | 1 |
| 14***10 | Lifting Group-Machine; -4-Point | 1 |
175-4242 Conversion Ar-Roading -Italy
| 14***01 | Installation Ar-Engine | 1 |
| 15***10 | Lighting Group-Roading | 1 |
| 17***13 | Box Group-Storage | 1 |
188-3307 Conversion Ar-Roading -Italy
| 14***80 | Coupler Group-Quick | 1 |
| 14***10 | Lifting Group-Machine; -4-Point | 1 |
| 17***13 | Box Group-Storage | 1 |
175-4244 Conversion Ar-Roading -Europe
| 15***94 | Installation Ar-Engine | 1 |
| 17***13 | Box Group-Storage | 1 |
| 17***17 | Conversion Group-Roading; -Italy | 1 |
166-2567 Conversion Ar-Roading -Germany
| 14***21 | Stud | 2 |
| 15***06 | Boss | 2 |
| 16***67 | Conversion Ar-Roading; -Germany | 1 |
188-3308 Conversion Ar-Roading -Germany
| 17***13 | Box Group-Storage | 1 |
| 17***17 | Conversion Group-Roading; -Italy | 1 |
| 17***28 | Mounting Group-Roading Lights; -Rear | 1 |
207-9779 Conversion Ar-Roading -Russian
| 14***05 | Installation Ar-Engine | 1 |
| 20***79 | Conversion Ar-Roading; -Russian | 1 |
175-4232 Conversion Gp-Roading -Germany
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 12***54 | Fastener; (Loop) (22cm) (X3) | 0 |
| 12***55 | Fastener-Hook; (18-cm Each) | 0 |
173-3017 Conversion Gp-Roading -Italy
| 17***17 | Conversion Group-Roading; -Italy | 1 |
| 17***33 | Mirror & Mtg Group-Rear View | 1 |
| 18***47 | Lifting Group-Machine; -4-Point | 1 |
154-4050 Counterweight Gp
| 11***34 | Film-Warning; (Steering) | 1 |
| 15***50 | Counterweight Group | 1 |
| 17***15 | Bracket As | 1 |
183-7132 Counterweight Gp
| 17***80 | Block | 14 |
| 18***32 | Counterweight Group | 1 |
| 7X***90 | Washer-Hard; (13.5x44.5x6-mm Thk) | 2 |
185-9941 Counterweight Gp -Kit
| 18***33 | Block; (33.99 Kg)(Lh) | 1 |
| 18***34 | Block; (33.99 Kg)(Rh) | 1 |
| 18***41 | Counterweight Group; -Kit | 1 |
183-7139 Counterweight Gp
| 18***31 | Block; (16.90 Kg) | 2 |
| 18***33 | Block; (33.99 Kg)(Lh) | 1 |
| 18***34 | Block; (33.99 Kg)(Rh) | 1 |
142-9103 Enclosure Gp-Engine
| 14***03 | Enclosure Group-Engine | 1 |
| 18***31 | Block; (16.90 Kg) | 2 |
| 18***33 | Block; (33.99 Kg)(Lh) | 1 |
154-3991 Enclosure Gp-Engine
| 11***85 | Bumper | 2 |
| 14***01 | Hood As | 1 |
| 14***02 | Door As-Access | 1 |
142-9075 Frame Gp-Loader
| 11***85 | Bumper | 2 |
| 14***01 | Hood As | 1 |
| 14***02 | Door As-Access | 1 |
150-8621 Guide Gp-Lines
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***31 | Breather; (Fast Fill Service Center) | 2 |
| 14***10 | Plate As | 1 |
152-1155 Lifting Gp-Machine -Single Point
| 14***05 | Plate As | 2 |
| 14***26 | Plate-Lift | 4 |
| 15***55 | Lifting Group-Machine; -Single Point | 1 |
142-9110 Lifting Gp-Machine -4-Point
| 14***10 | Lifting Group-Machine; -4-Point | 1 |
| 22***15 | Plate As | 1 |
| 24***77 | Bolt; (M8x1.25x12-mm) | 1 |
188-0147 Lifting Gp-Machine -4-Point
| 14***05 | Plate As | 2 |
| 15***54 | Bracket As-Lift | 1 |
| 15***56 | Plate | 4 |
175-4233 Mirror & Mtg Gp-Rear View
| 14***26 | Plate-Lift | 4 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 8 |
| 17***33 | Mirror & Mtg Group-Rear View | 1 |
173-3021 Mounting Gp-Registration -With Wiring & Lights
| 13***66 | Mirror Group-Rear View | 2 |
| 14***71 | Clamp; (Top)(Top) | 1 |
| 14***72 | Clamp; (Bottom)(Bottom) | 1 |
175-4228 Mounting Gp-Roading Lights -Rear
| 17***28 | Mounting Group-Roading Lights; -Rear | 1 |
| 17***36 | Plate | 1 |
| 19***62 | Lamp Group-Registration Plate | 1 |
176-0613 Suppression Gp-Sound
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 4 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
Fuel System
142-9261 Control Gp-Governor
| 13***87 | Clip | 2 |
| 14***61 | Control Group-Governor | 1 |
| 14***63 | Spring | 1 |
164-7629 Filter & Lines Gp-Fuel
| 03***47 | Ferrule | 2 |
| 03***00 | Washer; (0.531x0.718x0.064-In Thk) | 2 |
| 03***49 | Plug | 2 |
138-3096 Filter Gp-Fuel
| 10***39 | Nut | 1 |
| 10***40 | Cap; (Fuel Filter) | 1 |
| 10***41 | Seal; (Plunger) | 1 |
130-7092 Filter Gp-Water Sep & Fuel
| 11***18 | Ring-Retaining | 1 |
| 11***19 | Nut | 1 |
| 12***80 | Kit-Water Base; (Water Separator) | 1 |
153-1006 Fitting Gp-Fuel Lines
| 06***68 | Nut-Fuel Line; (1/2-In) | 1 |
| 06***69 | Olive-Fuel Tube | 1 |
| 15***06 | Fitting Group-Fuel Lines | 1 |
188-8819 Governor Gp
| 10***45 | Bolt; (M5x0.8x10-mm) | 4 |
| 13***41 | Washer | 1 |
| 13***12 | Nut | 3 |
171-2929 Governor Gp
| 10***45 | Bolt; (M5x0.8x10-mm) | 4 |
| 13***41 | Washer | 1 |
| 13***12 | Nut | 3 |
173-0122 Governor Gp
| 10***45 | Bolt; (M5x0.8x10-mm) | 4 |
| 13***41 | Washer | 1 |
| 13***12 | Nut | 3 |
178-6225 Governor Gp
| 10***45 | Bolt; (M5x0.8x10-mm) | 4 |
| 13***41 | Washer | 1 |
| 13***12 | Nut | 3 |
142-8843 Lines Gp-Fuel
| 03***00 | Washer; (0.531x0.718x0.064-In Thk) | 2 |
| 03***49 | Plug | 1 |
| 11***08 | Tube | 1 |
170-7498 Pump Gp-Fuel Injection
| 06***98 | Nut; (3/8-24-Thd) | 1 |
| 06***99 | Ferrule | 1 |
| 12***33 | Dowel | 2 |
171-3957 Pump Gp-Fuel Injection
| 06***98 | Nut; (3/8-24-Thd) | 1 |
| 06***99 | Ferrule | 1 |
| 12***33 | Dowel | 2 |
162-9269 Separator Gp-Water
| 11***01 | Bowl As-Water Collection | 1 |
| 11***18 | Ring-Retaining | 1 |
| 11***19 | Nut | 1 |
Hydraulic System
149-0686 Accumulator Gp-Hydraulic -Charged
| 12***18 | Seal; (1000-cm) | 0 |
| 12***37 | Seal | 0 |
| 14***86 | Accumulator Group-Hydraulic; -Charged | 1 |
177-1984 Cylinder & Mtg Gp-Angle Blade
| 06***43 | Ring-Snap | 1 |
| 17***84 | Cylinder & Mtg Group-Angle Blade | 1 |
| 21***55 | Pin As | 1 |
214-5557 Cylinder & Mtg Gp-Angle Blade
| 16***13 | Kit-Seal | 1 |
| 21***57 | Cylinder & Mtg Group-Angle Blade | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
154-5018 Cylinder Gp-Bucket
| 15***18 | Cylinder Group-Bucket | 1 |
| 16***13 | Kit-Seal | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
164-9295 Cylinder Gp-Grapple
| 16***95 | Cylinder Group-Grapple | 1 |
| 25***97 | Bearing-Sleeve | 1 |
| 25***42 | Bearing-Sleeve | 1 |
278-1975 Cylinder Gp-Grapple -Industrial
| 17***58 | Kit-Seal | 1 |
| 21***55 | Rod End As | 1 |
| 27***75 | Cylinder Group-Grapple; -Industrial | 1 |
156-5512 Cylinder Gp-Grapple
| 15***12 | Cylinder Group-Grapple | 1 |
| 17***85 | Kit-Seal | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
278-1969 Cylinder Gp-Hydraulic
| 14***93 | Kit-Seal | 1 |
| 27***69 | Cylinder Group-Hydraulic | 1 |
225-9521 Cylinder Gp-Hydraulic -Angle Blade
| 14***93 | Kit-Seal | 0 |
| 22***21 | Cylinder Group-Hydraulic; -Angle Blade | 1 |
142-9195 Cylinder Gp-Lift -Rh
| 14***92 | Kit-Seal | 1 |
| 14***95 | Cylinder Group-Lift; -Rh | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
142-9196 Cylinder Gp-Lift -Lh
| 14***92 | Kit-Seal | 1 |
| 14***96 | Cylinder Group-Lift; -Lh | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
177-9565 Cylinder Gp-Tilt -Rh
| 14***91 | Lines Group-Pilot | 1 |
| 14***40 | Tank & Mtg Group-Hydraulic | 1 |
| 14***80 | Filter & Mtg Group-Hydraulic | 1 |
177-9566 Cylinder Gp-Tilt -Lh
| 14***91 | Lines Group-Pilot | 1 |
| 14***40 | Tank & Mtg Group-Hydraulic | 1 |
| 14***80 | Filter & Mtg Group-Hydraulic | 1 |
142-9016 Hydraulic Ar
| 14***16 | Hydraulic Ar | 1 |
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
142-8715 Hydraulic Ar
| 14***83 | Control Group-Pilot Operated Hydraulic | 1 |
| 14***91 | Lines Group-Pilot | 1 |
| 14***99 | Pump & Mtg Group-Work Tool | 1 |
142-9017 Hydraulic Ar
| 14***17 | Hydraulic Ar | 1 |
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
142-9010 Hydraulic Ar
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***10 | Hydraulic Ar | 1 |
| 14***16 | Switch Group-Rocker; -Work Tool Positioner | 1 |
142-9008 Hydraulic Ar
| 14***08 | Hydraulic Ar | 1 |
| 15***72 | Lines Group-Lift Cylinder | 1 |
| 15***73 | Lines Group-Tilt Cylinder | 1 |
142-9006 Hydraulic Ar
| 14***90 | Control Group-Pilot Operated Hydraulic | 1 |
| 14***06 | Hydraulic Ar | 1 |
| 15***74 | Valve & Mtg Group-Interlock | 1 |
142-9007 Hydraulic Ar
| 14***83 | Control Group-Pilot Operated Hydraulic | 1 |
| 14***64 | Control Group-Pilot Operated Hydraulic | 1 |
| 14***07 | Hydraulic Ar | 1 |
214-5556 Kit-Angle Blade Cyl & Lines
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
279-5414 Lines Gp-Bucket -Multipurpose
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***95 | Fitting As; (Quick Disconnect, Male) | 1 |
279-5413 Lines Gp-Bucket -Multipurpose
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
154-5052 Lines Gp-Bucket
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
285-6113 Lines Gp-Bucket -Utility
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***95 | Fitting As; (Quick Disconnect, Male) | 1 |
154-5051 Lines Gp-Bucket
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
154-5019 Lines Gp-Bucket
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***95 | Fitting As; (Quick Disconnect, Male) | 1 |
279-5415 Lines Gp-Bucket -Multipurpose
| 14***19 | Connector As | 2 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
279-5412 Lines Gp-Bucket -Industrial
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
279-5416 Lines Gp-Bucket -Multipurpose
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***95 | Fitting As; (Quick Disconnect, Male) | 1 |
177-1986 Lines Gp-Connecting
| 14***16 | Connector Group | 1 |
| 14***90 | Elbow Group | 2 |
| 15***21 | Hose As | 1 |
269-7271 Lines Gp-Connecting
| 14***09 | Tube As | 1 |
| 14***90 | Elbow Group | 1 |
| 15***31 | Hose | 1 |
165-8733 Lines Gp-Grapple
| 10***29 | Stud; (M10x1.5-Thd) | 1 |
| 14***27 | Connector Group | 2 |
| 15***26 | Hose As | 2 |
161-0187 Lines Gp-Grapple
| 14***90 | Elbow Group | 1 |
| 15***41 | Hose As | 1 |
| 16***87 | Lines Group-Grapple; -Industrial | 1 |
214-5558 Lines Gp-Hydraulic
| 14***47 | Elbow; (-12 Orb/Orfs) | 2 |
| 15***26 | Hose As | 2 |
| 15***28 | Tube As | 1 |
154-4030 Lines Gp-Hydraulic Fan
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 14***37 | Block | 4 |
| 14***38 | Plate | 4 |
154-4040 Lines Gp-Hydraulic Fan
| 14***37 | Block | 4 |
| 14***38 | Plate | 4 |
| 14***97 | Block | 2 |
154-4020 Lines Gp-Hydraulic Fan
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 14***37 | Block | 4 |
| 14***38 | Plate | 4 |
154-4025 Lines Gp-Hydraulic Oil Cooler
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 11***61 | Seal Kit; (Includes Seals, Thrust Ring, Stem And Connectors) | 1 |
| 14***37 | Block | 4 |
154-4055 Lines Gp-Hydraulic Oil Cooler
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 11***61 | Seal Kit; (Includes Seals, Thrust Ring, Stem And Connectors) | 1 |
| 14***37 | Block | 4 |
158-6672 Lines Gp-Lift Cylinder
| 10***80 | Elbow Group | 1 |
| 14***13 | Hose As | 2 |
| 14***14 | Hose As | 2 |
142-9201 Lines Gp-Lift Cylinder
| 14***37 | Block | 4 |
| 14***38 | Plate | 4 |
| 14***97 | Block | 2 |
158-6677 Lines Gp-Pilot -Work Tool
| 11***15 | Plate-Cover | 2 |
| 14***98 | Clip | 2 |
| 14***34 | Hose As | 4 |
154-4027 Lines Gp-Pilot
| 11***15 | Plate-Cover | 2 |
| 14***98 | Clip | 2 |
| 14***34 | Hose As | 4 |
142-8691 Lines Gp-Pilot
| 14***81 | Hose | 1 |
| 14***91 | Lines Group-Pilot | 1 |
| 14***42 | Adapter | 1 |
154-4010 Lines Gp-Pump
| 11***15 | Plate-Cover | 2 |
| 14***98 | Clip | 2 |
| 14***34 | Hose As | 4 |
154-4015 Lines Gp-Pump
| 11***15 | Plate-Cover | 2 |
| 14***98 | Clip | 2 |
| 14***42 | Connector Group | 2 |
158-6673 Lines Gp-Tilt Cylinder
| 12***74 | Spacer; (10.3x19x41-mm Thk) | 2 |
| 14***14 | Tube As | 1 |
| 14***44 | Tube As | 1 |
142-9202 Lines Gp-Tilt Cylinder
| 12***74 | Spacer; (10.3x19x41-mm Thk) | 2 |
| 14***14 | Tube As | 1 |
| 14***15 | Tube As | 1 |
142-9047 Lines Gp-Work Tool
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 14***47 | Lines Group-Work Tool | 1 |
| 15***79 | Kit-Seal; (Relief Valve, Conveyor Cont) | 1 |
158-6666 Lines Gp-Work Tool
| 08***31 | Seal-O-Ring | 1 |
| 15***66 | Lines Group-Work Tool | 1 |
| 18***61 | Gasket | 1 |
159-5755 Manifold & Mtg Gp-Control
| 08***31 | Seal-O-Ring | 1 |
| 15***55 | Manifold & Mtg Group-Control | 1 |
| 18***61 | Gasket | 1 |
224-9408 Manifold & Solenoid Gp-Control
| 18***61 | Gasket | 1 |
| 18***62 | Kit-Valve; (Check) | 1 |
| 18***63 | Kit-Valve; (Relief) | 1 |
191-9674 Motor & Mtg Gp-Hydraulic Fan
| 15***12 | Pin | 2 |
| 15***13 | Pin | 2 |
| 19***74 | Motor & Mtg Group-Hydraulic Fan | 1 |
188-0128 Motor Gp-Gear -Hydraulic Fan
| 14***35 | Pump Group-Gear; -Charge | 1 |
| 16***14 | Gasket | 1 |
| 18***28 | Motor Group-Gear; -Hydraulic Fan | 1 |
152-4888 Motor Gp-Gear -Fan
| 15***88 | Motor Group-Gear; -Fan | 1 |
| 15***13 | Plate | 1 |
| 15***41 | Pin | 2 |
185-9948 Motor Gp-Gear
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 1 |
| 18***48 | Motor Group-Gear; -Hydraulic Fan | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
180-2996 Motor Gp-Gear -Fan
| 15***13 | Pin | 2 |
| 18***96 | Motor Group-Gear; -Fan | 1 |
| 6V***89 | Locknut; (M8x1.25-Thd) | 2 |
165-8731 Mounting Gp-Cylinder
| 16***31 | Mounting Group-Cylinder; -Utility | 1 |
| 17***97 | Pump Group-Gear | 1 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 2 |
156-0891 Mounting Gp-Cylinder
| 14***58 | Pump Group-Gear | 1 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 1P***78 | Flange; (To 5v***09 Tube Assembly) | 2 |
154-5011 Mounting Gp-Cylinder
| 14***98 | Pump Group-Piston | 1 |
| 15***11 | Mounting Group-Cylinder | 1 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 2 |
142-8714 Plug Gp-Pilot Valve
| 13***15 | Seal-Shaft | 2 |
| 14***14 | Plug Group-Pilot Valve | 1 |
| 18***67 | Ring-Retaining | 2 |
142-8934 Pump & Mtg Gp-Gear
| 10***41 | Ring-Snap | 1 |
| 13***15 | Seal-Shaft | 1 |
| 14***34 | Pump & Mtg Group-Gear; -Charge | 1 |
142-9048 Pump & Mtg Gp-Work Tool
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 6 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***56 | Seal-O-Ring | 1 |
142-8699 Pump & Mtg Gp-Work Tool
| 14***99 | Pump & Mtg Group-Work Tool | 1 |
177-3397 Pump Gp-Gear
| 17***01 | Bracket As | 1 |
| 17***97 | Pump Group-Gear | 1 |
| 19***71 | Valve Group-Bank 6 | 1 |
142-8935 Pump Gp-Gear -Charge
| 14***35 | Pump Group-Gear; -Charge | 1 |
| 14***57 | Valve Group-Bank 5 | 1 |
| 17***01 | Bracket As | 1 |
142-8698 Pump Gp-Piston
| 14***98 | Pump Group-Piston | 1 |
| 17***01 | Bracket As | 1 |
| 17***66 | Valve Group-Bank 3 | 1 |
142-8940 Tank & Mtg Gp-Hydraulic
| 14***40 | Tank & Mtg Group-Hydraulic | 1 |
| 17***01 | Bracket As | 1 |
| 18***25 | Valve Group-Bank 3 | 1 |
142-8939 Tank Gp-Hydraulic
| 14***39 | Tank Group-Hydraulic | 1 |
| 17***01 | Bracket As | 1 |
| 17***63 | Valve Group-Bank 2 | 1 |
159-5743 Valve & Mtg Gp-Bank
| 10***80 | Elbow Group | 1 |
| 13***90 | Bolt-Socket Head; (M8x1.25x120-mm) | 2 |
| 14***11 | Hose As | 1 |
159-5742 Valve & Mtg Gp-Bank
| 13***90 | Bolt-Socket Head; (M8x1.25x120-mm) | 2 |
| 14***11 | Hose As | 2 |
| 14***68 | Elbow Group | 2 |
142-9253 Valve & Mtg Gp-Bank
| 13***90 | Bolt-Socket Head; (M8x1.25x120-mm) | 2 |
| 14***10 | Tube As | 1 |
| 14***11 | Hose As | 2 |
158-6674 Valve & Mtg Gp-Interlock
| 13***90 | Bolt-Socket Head; (M8x1.25x120-mm) | 3 |
| 14***11 | Hose As | 1 |
| 14***12 | Hose As | 2 |
158-6675 Valve & Mtg Gp-Interlock
| 12***15 | Fitting As; (Quick Disconnect) | 1 |
| 15***50 | Ring-Backup | 2 |
| 15***75 | Valve & Mtg Group-Interlock | 1 |
158-6676 Valve & Mtg Gp-Interlock
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 15***50 | Ring-Backup | 2 |
| 15***76 | Valve & Mtg Group-Interlock | 1 |
188-3322 Valve Gp-Bank 2
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 12***15 | Fitting As; (Quick Disconnect) | 1 |
| 15***50 | Ring-Backup | 2 |
178-2263 Valve Gp-Bank 2
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 12***15 | Fitting As; (Quick Disconnect) | 1 |
| 15***50 | Ring-Backup | 2 |
188-3325 Valve Gp-Bank 3
| 11***04 | Kit-Seal; (Check Valve) | 1 |
| 12***57 | Valve Group-Check | 1 |
| 14***25 | Connector As. | 3 |
178-2266 Valve Gp-Bank 3
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 12***15 | Fitting As; (Quick Disconnect) | 1 |
| 15***50 | Ring-Backup | 2 |
142-9257 Valve Gp-Bank 5
| 11***04 | Kit-Seal; (Check Valve) | 1 |
| 12***57 | Valve Group-Check | 2 |
| 14***57 | Valve Group-Bank 5 | 1 |
195-6771 Valve Gp-Bank 6
| 11***04 | Kit-Seal; (Check Valve) | 1 |
| 12***57 | Valve Group-Check | 1 |
| 14***19 | Manifold | 1 |
9t-7634 Valve Gp-Check
| 11***04 | Kit-Seal; (Check Valve) | 1 |
| 12***57 | Valve Group-Check | 1 |
| 14***44 | Valve Group-Solenoid | 1 |
185-9408 Valve Gp-Interlock Manifold
| 09***07 | Nut; (M12x1.75-Thd) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 14***08 | Grommet | 1 |
185-9407 Valve Gp-Interlock Manifold
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***70 | Kit-Pilot Valve; (Lever) | 1 |
| 15***53 | Grommet | 1 |
185-9406 Valve Gp-Interlock Manifold
| 11***61 | Seal Kit; (Includes Seals, Thrust Ring, Stem And Connectors) | 1 |
| 18***06 | Valve Group-Interlock Manifold | 1 |
| 20***71 | Valve Group-Manual; (Coupler Pin, Lift Arm Lwr Cont) | 1 |
155-5650 Valve Gp-Interlock Manifold
| 11***04 | Kit-Seal; (Check Valve) | 1 |
| 12***57 | Valve Group-Check | 1 |
| 14***44 | Valve Group-Solenoid | 1 |
112-1817 Valve Gp-Manual -Dead Engine, Lift Arm Lower
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 15***70 | Kit-Pilot Valve; (Lever) | 1 |
172-6838 Valve Gp-Pilot
| 03***28 | Seal-O-Ring | 1 |
| 13***76 | Seal-O-Ring | 1 |
| 17***38 | Valve Group-Pilot | 1 |
142-8689 Valve Gp-Pilot
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 14***89 | Valve Group-Pilot | 1 |
| 15***70 | Kit-Pilot Valve; (Lever) | 1 |
173-2430 Valve Gp-Pilot -Work Tool
| 03***28 | Seal-O-Ring | 1 |
| 13***76 | Seal-O-Ring | 1 |
| 17***30 | Valve Group-Pilot; -Work Tool | 1 |
172-6837 Valve Gp-Pilot
| 09***07 | Nut; (M12x1.75-Thd) | 1 |
| 14***08 | Grommet | 1 |
| 15***70 | Kit-Pilot Valve; (Lever) | 1 |
193-8357 Valve Gp-Pilot
| 03***79 | Seal-O-Ring (Id=10.82mm) | 2 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 2 |
| 15***03 | Service Kit; (Consist Of Seal, Ring And Spring) | 1 |
193-8358 Valve Gp-Pilot
| 03***79 | Seal-O-Ring (Id=10.82mm) | 2 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 2 |
| 15***03 | Service Kit; (Consist Of Seal, Ring And Spring) | 1 |
142-8687 Valve Gp-Pilot
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 14***87 | Valve Group-Pilot; -Joystick | 1 |
| 15***70 | Kit-Pilot Valve; (Lever) | 1 |
172-6836 Valve Gp-Pilot
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 15***70 | Kit-Pilot Valve; (Lever) | 1 |
| 15***49 | Control Group-Handle | 1 |
185-7709 Valve Gp-Relief
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***48 | Kit-Seal; (Solenoid Valve) | 1 |
| 14***43 | Solenoid As | 1 |
185-7708 Valve Gp-Relief
| 03***79 | Seal-O-Ring (Id=10.82mm) | 3 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 2 |
| 03***69 | Nut; (3/8-24-Thd) | 1 |
186-0909 Valve Gp-Relief -Line
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***35 | Kit-Seal | 1 |
| 12***72 | Cartridge As | 1 |
186-0913 Valve Gp-Relief
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
| 16***24 | Nut-Self-Locking; (1/2-28-Thd) | 1 |
| 18***13 | Valve Group-Relief; -Tilt Dump-Line | 1 |
188-0878 Valve Gp-Relief -Main
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***70 | Nut; (1/2-20-2b-Thd) | 2 |
| 18***31 | Valve As | 1 |
159-0748 Valve Gp-Solenoid
| 14***52 | Bracket As | 1 |
| 15***48 | Valve Group-Solenoid | 1 |
| 19***98 | Arm As-Lift | 1 |
173-7832 Valve Gp-Solenoid
| 14***32 | Pin As | 1 |
| 14***80 | Lever | 1 |
| 14***81 | Bracket | 1 |
185-9409 Valve Gp-Solenoid
| 14***32 | Pin As | 1 |
| 14***80 | Lever | 1 |
| 14***81 | Bracket | 1 |
144-1644 Valve Gp-Solenoid
| 14***96 | Plate As; (Rh) | 1 |
| 14***97 | Plate As; (Lh) | 1 |
| 14***44 | Valve Group-Solenoid | 1 |
Implements
195-6798 Arm As-Lift
| 14***32 | Pin As | 1 |
| 14***80 | Lever | 1 |
| 14***81 | Bracket | 1 |
197-4910 Arm As-Lift
| 14***32 | Pin As | 1 |
| 14***80 | Lever | 1 |
| 14***81 | Bracket | 1 |
142-9099 Control Gp-Work Tool
| 14***32 | Pin As | 1 |
| 14***80 | Lever | 1 |
| 14***81 | Bracket | 1 |
177-9577 Control Gp-Work Tool
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***40 | Pin | 2 |
| 16***19 | Pin As | 2 |
Lubrication System
164-7616 Filter Gp-Engine Oil
| 11***45 | Connector | 1 |
| 16***16 | Filter Group-Engine Oil | 1 |
| 16***19 | Seal-O-Ring | 1 |
173-0140 Pump Gp-Engine Oil
| 15***82 | Dowel | 2 |
| 15***83 | Bolt; (M6x1.0x25mm) | 3 |
| 15***88 | Valve As; (Oil Check)(Engine) | 1 |
178-6239 Pump Gp-Engine Oil
| 15***82 | Dowel | 2 |
| 15***83 | Bolt; (M6x1.0x25mm) | 3 |
| 15***88 | Valve As; (Oil Check)(Engine) | 1 |
188-8820 Pump Gp-Engine Oil
| 15***82 | Dowel | 2 |
| 15***83 | Bolt; (M6x1.0x25mm) | 3 |
| 15***88 | Valve As; (Oil Check)(Engine) | 1 |
171-2948 Pump Gp-Engine Oil
| 15***80 | Pump As-Engine Oil | 1 |
| 15***83 | Bolt; (M6x1.0x25mm) | 1 |
| 15***85 | Seal-O-Ring | 1 |
Machine Arrangement
177-9564 Chassis Ar
| 14***43 | Lines Group-Fuel | 1 |
| 14***75 | Frame Group-Loader | 1 |
| 14***03 | Enclosure Group-Engine | 1 |
154-3999 Chassis Ar
| 14***43 | Lines Group-Fuel | 1 |
| 14***75 | Frame Group-Loader | 1 |
| 14***99 | Control Group-Work Tool | 1 |
142-9002 Chassis Ar
| 14***43 | Lines Group-Fuel | 1 |
| 14***02 | Chassis Ar | 1 |
| 14***75 | Frame Group-Loader | 1 |
142-9100 Common Ar
| 14***15 | Hydraulic Ar | 1 |
| 14***01 | Power Train Ar | 1 |
| 14***00 | Common Ar | 1 |
142-9000 Common Ar
| 14***00 | Common Ar | 1 |
| 14***01 | Power Train Ar | 1 |
| 14***02 | Chassis Ar | 1 |
142-9200 Common Ar
| 14***07 | Hydraulic Ar | 1 |
| 14***38 | Power Train Ar | 1 |
| 14***00 | Common Ar | 1 |
188-3313 Conversion Ar-Machine
| 14***80 | Coupler Group-Quick | 1 |
| 15***94 | Installation Ar-Engine | 1 |
| 18***13 | Conversion Ar-Machine | 1 |
Operator Station
176-3900 Accumulator Gp-Refrigerant -Uncharged
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 17***00 | Accumulator Group-Refrigerant; -With Desiccant | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
219-7182 Air Conditioner Gp
| 15***78 | Mount As | 2 |
| 15***81 | Mount | 2 |
| 15***90 | Bracket | 1 |
142-9264 Armrest & Mounting Gp
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 16 |
| 10***56 | Plug; (Switch) | 2 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
142-9276 Armrest Gp
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 16 |
| 10***56 | Plug; (Switch) | 2 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
173-3013 Box Gp-Storage
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 16 |
| 10***56 | Plug; (Switch) | 2 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
218-4994 Compressor Gp-Refrigerant
| 11***99 | Gasket; (Air Conditioner Control) | 4 |
| 14***32 | Switch Group-Rocker; (Hydraulic Shutoff Control) | 1 |
| 14***29 | Switch As-Rocker; (Roading Lights) | 1 |
159-5749 Control Gp-Handle
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***32 | Switch Group-Rocker; (Hydraulic Shutoff Control) | 1 |
| 14***29 | Switch As-Rocker; (Roading Lights) | 1 |
159-5750 Control Gp-Handle -Speed & Direction
| 14***62 | Floorplate As | 1 |
| 14***65 | Support As-Lh | 1 |
| 14***67 | Support As-Rh | 1 |
204-1396 Control Gp-Handle -Speed & Direction
| 14***62 | Floorplate As | 1 |
| 15***68 | Strip | 2 |
| 18***32 | Insulation As | 2 |
142-8957 Control Gp-Pilot Operated Hyd
| 0T***44 | Bolt (1.25" Long) | 2 |
| 14***57 | Control Group-Pilot Operated Hydraulic | 1 |
| 6E***49 | Washer; (11x27x6-mm Thk) | 2 |
142-8958 Control Gp-Pilot Operated Hyd
| 14***58 | Control Group-Pilot Operated Hydraulic | 1 |
| 14***09 | Seat Group | 1 |
| 14***46 | Bracket | 1 |
142-8964 Control Gp-Pilot Operated Hyd
| 10***57 | Strip; (Locking) (275cm) | 0 |
| 12***37 | Seal | 0 |
| 14***64 | Control Group-Pilot Operated Hydraulic | 1 |
142-8959 Control Gp-Pilot Operated Hyd
| 09***25 | Pin-Clevis | 2 |
| 14***59 | Control Group-Pilot Operated Hydraulic | 1 |
| 15***82 | Spring-Gas; (Non-Locking) | 2 |
142-8690 Control Gp-Pilot Operated Hyd
| 0T***44 | Bolt (1.25" Long) | 2 |
| 14***90 | Control Group-Pilot Operated Hydraulic | 1 |
| 6E***49 | Washer; (11x27x6-mm Thk) | 2 |
142-8683 Control Gp-Pilot Operated Hyd
| 12***43 | Seal; (70-cm) | 0 |
| 14***83 | Control Group-Pilot Operated Hydraulic | 1 |
| 18***02 | Bracket As | 1 |
142-9274 Cover Gp-Console
| 14***74 | Cover Group-Console | 1 |
| 20***30 | Glass; (Slider) | 1 |
| 20***31 | Glass; (Slider) | 1 |
142-9269 Cover Gp-Console
| 14***69 | Cover Group-Console | 1 |
| 15***25 | Plate | 1 |
| 15***88 | Window Group-Cab; -Rh | 1 |
142-9118 Cover Gp-Instrument Panel -Service Meter
| 14***18 | Cover Group-Instrument Panel; -Service Meter | 1 |
| 20***30 | Glass; (Slider) | 1 |
| 20***31 | Glass; (Slider) | 1 |
159-5800 Door & Mtg Gp-Cab
| 14***63 | Window Group-Cab | 1 |
| 15***00 | Door & Mtg Group-Cab | 1 |
142-9302 Door & Mtg Gp-Cab
| 14***02 | Door & Mtg Group-Cab | 1 |
| 14***62 | Window Group-Cab | 1 |
218-6441 Door Gp-Cab -Polycarbonate
| 12***10 | Film; (Red Stripe)(Red Stripe - 1225 cm) | 0 |
| 16***86 | Film-Stripe; (Rh) | 1 |
| 16***87 | Film-Stripe; (Lh) | 1 |
142-9340 Door Gp-Cab -Glass
| 14***40 | Door Group-Cab; -Glass | 1 |
| 15***88 | Window Group-Cab; -Rh | 1 |
| 15***89 | Window Group-Cab; -Lh | 1 |
218-6431 Door Gp-Cab -Glass
| 12***10 | Film; (Red Stripe)(Red Stripe - 1225 cm) | 0 |
| 16***86 | Film-Stripe; (Rh) | 1 |
| 16***87 | Film-Stripe; (Lh) | 1 |
223-0616 Door Gp-Cab -Glass
| 15***02 | Filter Group-Fuel; (Primary) | 1 |
| 16***65 | Filter-Fuel; (Water Separator) | 1 |
| 16***73 | Bottle Group-Fluid Sampling | 2 |
159-5801 Door Gp-Cab -Polycarbonate
| 12***10 | Film; (Red Stripe)(Red Stripe - 1225 cm) | 0 |
| 15***01 | Door Group-Cab; -Polycarbonate | 1 |
| 16***86 | Film-Stripe; (Rh) | 1 |
152-4881 Duct Gp-Defroster
| 10***30 | Film; (Warning) (Accumulator Pressure) (On Bracket Covering Brake Accumulator) | 1 |
| 14***15 | Film-Instruction; (Relay) | 1 |
| 14***26 | Film-Instruction; (Service Chart) | 1 |
152-4880 Filter Gp-Cab Air
| 15***80 | Filter Group-Cab Air | 1 |
| 15***82 | Plate-Warning; (Ops Certification, Read Omm) | 1 |
| 15***34 | Film-Warning; (Universal) | 1 |
142-7499 Gauge & Warning Gp -Rh
| 14***99 | Gauge & Warning Group; -Rh | 1 |
| 17***41 | Film-Caution; (Lift Eye, Tie-Down Location) | 1 |
142-7498 Gauge & Warning Gp -Lh
| 10***69 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 14***98 | Gauge & Warning Group; -Lh | 1 |
| 16***12 | Film-Warning; (Cab Tilt Support Lever) | 2 |
152-1160 Guard Gp-Rops/Fops
| 10***76 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 15***60 | Guard Group-Rops/Fops | 1 |
| 16***19 | Film-Warning; (Cab Tilt Support Lever) | 2 |
218-6118 Handle Gp-Modular
| 17***43 | Film-Warning; (Engine Start Procedure) | 1 |
| 17***64 | Film-Warning; (Warning/Danger Combination) | 1 |
| 17***69 | Film-Instruction; (Omm) | 1 |
222-5721 Heater & Mtg Gp-Cab -Kit
| 10***68 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 16***15 | Film-Warning; (Lift Arm Brace) | 1 |
| 16***20 | Film-Warning; (Universal) | 1 |
150-8627 Heater & Mtg Gp-Cab
| 14***60 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 15***27 | Heater & Mtg Group-Cab | 1 |
| 16***20 | Film-Warning; (Cab Tilt Support Lever) | 2 |
150-8629 Heater & Mtg Gp-Cab
| 10***73 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 15***29 | Heater & Mtg Group-Cab | 1 |
| 16***16 | Film-Warning; (Cab Tilt Support Lever) | 2 |
183-7130 Heater & Mtg Gp-Cab -Kit
| 10***75 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 16***18 | Film-Warning; (Cab Tilt Support Lever) | 2 |
| 16***55 | Film-Warning; (Quick Coupler) | 1 |
220-8143 Heater & Mtg Gp-Cab
| 12***83 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 16***25 | Film-Warning; (Cab Tilt Support Lever) | 2 |
| 16***60 | Film-Warning; (Universal) | 1 |
142-9289 Heater Gp-Cab
| 10***71 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 14***89 | Heater Group-Cab | 1 |
| 16***14 | Film-Warning; (Cab Tilt Support Lever) | 2 |
220-8144 Heater Gp-Cab
| 17***38 | Film-Warning; (Engine Start Procedure) | 1 |
| 17***59 | Film-Warning; (Warning/Danger Combination) | 1 |
| 17***64 | Film-Instruction; (Omm) | 1 |
150-8624 Heater Gp-Cab
| 15***24 | Heater Group-Cab | 1 |
| 17***45 | Film-Warning; (Engine Start Procedure) | 1 |
| 17***66 | Film-Warning; (Warning/Danger Combination) | 1 |
186-3363 Horn Gp-Electric
| 13***51 | Film-Warning; (Battery) | 1 |
| 16***21 | Film-Warning; (Cab Tilt Support Lever) | 2 |
| 16***56 | Film-Warning; (Universal) | 1 |
142-8655 Horn Gp-Electric
| 10***72 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 14***55 | Horn Group-Electric | 1 |
| 16***15 | Film-Warning; (Cab Tilt Support Lever) | 2 |
266-9194 Kit-Air Cond & Heater Instl
| 15***84 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 17***50 | Film-Notice; (Engine Start Procedure) | 1 |
| 17***70 | Film-Warning; (Warning, Danger Combination) | 1 |
266-9189 Kit-Air Cond & Heater Instl
| 16***24 | Film-Warning; (Cab Tilt Support Lever) | 2 |
| 16***61 | Film-Warning; (Quick Coupler) | 1 |
| 16***59 | Film-Warning; (Universal) | 1 |
266-9216 Kit-Air Conditioner Instl
| 11***67 | Film-Warning; (Cable Connection) | 1 |
| 16***22 | Film-Warning; (Cab Tilt Support Lever) | 2 |
| 16***59 | Film-Warning; (Quick Coupler) | 1 |
266-9207 Kit-Air Conditioner Instl
| 10***70 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 16***13 | Film-Warning; (Cab Tilt Support Lever)(Cab Tilt Support Lever) | 2 |
| 16***27 | Film-Warning; (Quick Coupler)(Quick Coupler) | 1 |
233-5963 Kit-Cab Door & Mounting -Polycarbonate
| 19***15 | Film-Warning; (Cab Tilt Support Lever) | 2 |
| 19***18 | Film-Warning; (Universal) | 1 |
| 19***21 | Film-Warning; (Battery) | 1 |
178-2252 Kit-Cab Door & Mounting
| 10***77 | Film-Warning; (Jump Start, Read Omm) | 1 |
| 16***23 | Film-Warning; (Cab Tilt Support Lever) | 2 |
| 16***58 | Film-Warning; (Universal) | 1 |
233-5962 Kit-Cab Door & Mounting -Glass
| 19***53 | Film-Instruction; (Omm) | 1 |
| 19***03 | Film-Warning; (Engine Start Procedure) | 1 |
| 19***49 | Film-Warning; (Quick Coupler) | 1 |
178-2253 Kit-Cab Door & Mounting
| 17***53 | Kit-Cab Door & Mounting | 1 |
| 17***48 | Film-Notice; (Engine Start Procedure) | 1 |
| 17***52 | Film-Warning; (Warning/Danger Combination) | 1 |
266-9184 Kit-Cab Heater & Mounting
| 19***10 | Film-Identification; (Synthetic Hydraulic Oil, Read Omm) | 1 |
| 26***84 | Kit-Cab Heater & Mounting | 1 |
142-9351 Liner Gp-Cab
| 14***51 | Liner Group-Cab | 1 |
142-9311 Liner-Cab -Gray
| 14***11 | Liner-Cab; -Gray | 1 |
150-8630 Lines Gp-Heater
| 15***30 | Lines Group-Heater | 1 |
150-8628 Lines Gp-Heater
| 15***28 | Lines Group-Heater | 1 |
190-7943 Lines Gp-Heater
| 19***43 | Lines Group-Heater | 1 |
223-6539 Module Gp-Warning Indicator -With Alarm
| 22***39 | Module Group-Warning Indicator; -With Alarm | 1 |
144-9931 Module Gp-Warning Indicator -Without Alarm
| 14***31 | Module Group-Warning Indicator; -Without Alarm | 1 |
144-9930 Module Gp-Warning Indicator -With Alarm, Function Lights
| 14***30 | Module Group-Warning Indicator; -With Alarm, Function Lights | 1 |
161-7522 Motor Gp-Window Wiper
| 16***22 | Motor Group-Window Wiper | 1 |
142-9354 Mounting Gp-Rops
| 14***54 | Mounting Group-Rops | 1 |
142-9300 Operator Ar-Enclosed Rops
| 14***00 | Operator Ar-Enclosed Rops | 1 |
158-6700 Panel Gp-Instrument
| 15***00 | Panel Group-Instrument | 1 |
158-6702 Panel Gp-Instrument
| 15***02 | Panel Group-Instrument | 1 |
203-4330 Panel Gp-Instrument
| 20***30 | Panel Group-Instrument | 1 |
159-5785 Panel Gp-Instrument
| 15***85 | Panel Group-Instrument | 1 |
158-6704 Panel Gp-Instrument
| 15***04 | Panel Group-Instrument | 1 |
152-4889 Platform Gp-Operator
| 15***89 | Platform Group-Operator | 1 |
187-3201 Seal Gp-Cab
| 18***01 | Seal Group-Cab | 1 |
188-0141 Seal Gp-Cab
| 18***41 | Seal Group-Cab | 1 |
142-9307 Seat Belt Gp -Retractable, 3-In
| 14***07 | Seat Belt Group; -Retractable, 3-In | 1 |
142-9308 Seat Belt Gp -Retractable, 3-In
| 14***08 | Seat Belt Group; -Retractable, 3-In | 1 |
220-8082 Seat Belt Gp -Retractable, 2-In
| 22***82 | Seat Belt Group; -Retractable, 2-In | 1 |
220-8083 Seat Belt Gp -Retractable, 3-In
| 22***83 | Seat Belt Group; -Retractable, 3-In | 1 |
220-8081 Seat Belt Gp -Retractable, 3-In
| 22***81 | Seat Belt Group; -Retractable, 3-In | 1 |
142-9303 Seat Belt Gp -Retractable, 2-In
| 14***03 | Seat Belt Group; -Retractable, 2-In | 1 |
220-8080 Seat Belt Gp -Retractable, 2-In
| 22***80 | Seat Belt Group; -Retractable, 2-In | 1 |
142-9306 Seat Belt Gp -Retractable, 2-In
| 14***06 | Seat Belt Group; -Retractable, 2-In | 1 |
142-9310 Seat Gp -Static
| 14***10 | Seat Group; -Static | 1 |
142-9305 Seat Gp -Suspension
| 14***05 | Seat Group; -Suspension | 1 |
142-9304 Seat Gp-Adjustable
| 14***04 | Seat Group-Adjustable | 1 |
177-3403 Spring Gp-Gas
| 17***03 | Spring Group-Gas; -Cab | 1 |
173-3022 Visor Gp-Cab
| 17***22 | Visor Group-Cab | 1 |
166-2569 Visor Gp-Cab
| 16***69 | Visor Group-Cab | 1 |
183-7138 Window Gp-Cab -Kit
| 18***38 | Window Group-Cab; -Kit | 1 |
187-3213 Window Gp-Cab
| 18***13 | Window Group-Cab | 1 |
154-7989 Window Gp-Cab -Lh
| 15***89 | Window Group-Cab; -Lh | 1 |
154-7988 Window Gp-Cab -Rh
| 15***88 | Window Group-Cab; -Rh | 1 |
183-7137 Window Gp-Cab -Kit
| 18***37 | Window Group-Cab; -Kit | 1 |
142-9363 Window Gp-Cab
| 14***63 | Window Group-Cab | 1 |
142-9362 Window Gp-Cab
| 14***62 | Window Group-Cab | 1 |
Power Train
142-9058 Axle Gp
| 14***23 | Housing-Axle | 1 |
| 14***24 | Spindle-Wheel | 1 |
| 14***29 | Spacer; (57.16x69.85x27.54-mm Thk) | 1 |
142-9060 Drive Gp-Tandem
| 10***66 | Bolt; (Self Locking) (M16x2x40mm) | 4 |
| 14***32 | Sprocket; (13-Teeth)(Motor) | 4 |
| 14***33 | Retainer | 2 |
142-8980 Filter & Mtg Gp-Hydraulic
| 14***80 | Filter & Mtg Group-Hydraulic | 1 |
| 19***84 | Filter Group-Oil; -Implement Pilot Oil | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
191-9784 Filter Gp-Oil
| 18***64 | Valve As-Fluid Sampling; (Transmission) | 1 |
| 19***84 | Filter Group-Oil; -Implement Pilot Oil | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
173-3038 Lines Gp-Hydraulic Filter
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***41 | Connector Group | 1 |
| 14***82 | Elbow As | 1 |
154-4035 Lines Gp-Hydraulic Filter
| 14***41 | Connector Group | 1 |
| 14***82 | Elbow As | 1 |
| 15***48 | Elbow As | 1 |
150-8620 Lines Gp-Hydrostatic
| 11***49 | Fitting As; (Quick Disconnect) | 2 |
| 11***44 | Hose As | 1 |
| 13***58 | Hose Assem. | 1 |
142-9040 Lines Gp-Hydrostatic
| 11***44 | Hose As | 1 |
| 13***58 | Hose Assem. | 1 |
| 14***79 | Manifold Group-Return | 1 |
142-8730 Lines Gp-Parking Brake
| 10***30 | Hose Assem. | 1 |
| 14***30 | Lines Group-Parking Brake | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
150-8619 Manifold Gp-Return
| 14***53 | Manifold Group-Return | 1 |
| 14***77 | Valve Group-Check; (Axle Oil Cooler Bypass) | 1 |
| 14***16 | Connector Group | 1 |
142-8679 Manifold Gp-Return
| 14***79 | Manifold Group-Return | 1 |
| 14***53 | Manifold Group-Return | 1 |
| 14***77 | Valve Group-Check; (Axle Oil Cooler Bypass) | 1 |
142-9059 Motor & Mtg Gp-Hydrostatic
| 14***53 | Manifold Group-Return | 1 |
| 14***77 | Valve Group-Check; (Axle Oil Cooler Bypass) | 1 |
| 14***59 | Motor & Mtg Group-Hydrostatic | 1 |
142-9020 Motor Gp-Piston
| 14***20 | Motor Group-Piston | 3 |
| 14***21 | Stud | 16 |
| 8T***22 | Washer-Hard-To Lock Carrier Rollers | 16 |
142-8750 Mounting Gp-Pump
| 03***53 | Seal-O-Ring; (08.92mm Id) | 1 |
| 14***50 | Mounting Group-Pump | 1 |
| 20***17 | Seal-Ring | 1 |
142-9038 Power Train Ar
| 14***30 | Lines Group-Parking Brake | 1 |
| 14***50 | Mounting Group-Pump | 1 |
| 14***38 | Power Train Ar | 1 |
142-9001 Power Train Ar
| 11***56 | Flange; (314mm Od) | 1 |
| 14***19 | Plate-Adapter | 1 |
| 14***01 | Power Train Ar | 1 |
180-3006 Pump Gp-Piston
| 10***07 | Cradle-Bearing | 2 |
| 10***09 | Bearing | 2 |
| 10***65 | Circlip | 2 |
154-4018 Pump Gp-Piston -Hydrostatic
| 14***30 | Lines Group-Parking Brake | 1 |
| 14***50 | Mounting Group-Pump | 1 |
| 14***59 | Motor & Mtg Group-Hydrostatic | 1 |
142-8728 Tire & Rim Gp -Lh
| 10***07 | Cradle-Bearing | 2 |
| 10***09 | Bearing | 2 |
| 10***65 | Circlip | 2 |
142-9027 Tire & Rim Gp -Lh
| 14***26 | Tire; (12-R16.5) | 1 |
| 14***59 | Wheel As | 1 |
| 14***27 | Tire & Rim Group; -Lh | 1 |
142-8737 Tire & Rim Gp -Rh
| 14***26 | Tire; (12-R16.5) | 1 |
| 14***31 | Wheel As | 1 |
| 14***37 | Tire & Rim Group; -Rh | 1 |
188-0117 Tire & Rim Gp -Rh
| 15***99 | Valve As-Tire | 1 |
| 18***35 | Tire; (305-546) | 1 |
| 18***37 | Wheel As | 1 |
165-4907 Tire & Rim Gp -Heavy-Duty, Rh
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 16***07 | Tire & Rim Group; -Heavy-Duty, Rh | 1 |
188-0124 Tire & Rim Gp -Lh
| 15***99 | Valve As-Tire | 1 |
| 18***35 | Tire; (305-546) | 1 |
| 18***36 | Wheel As | 1 |
188-0116 Tire & Rim Gp -Lh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***33 | Tire; (12-16.5) | 1 |
199-5439 Tire & Rim Gp -Rh
| 15***99 | Valve As-Tire | 1 |
| 17***70 | Wheel As | 1 |
| 19***39 | Tire & Rim Group; -Rh | 1 |
165-4901 Tire & Rim Gp -Heavy-Duty, Lh
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 15***82 | Tire; (12-R16.5) | 1 |
185-9929 Tire & Rim Gp -Rh
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***29 | Tire & Rim Group; -Rh | 1 |
188-0125 Tire & Rim Gp -Rh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***33 | Tire; (12-16.5) | 1 |
142-8738 Tire & Rim Gp -Lh
| 14***26 | Tire; (12-R16.5) | 1 |
| 14***31 | Wheel As | 1 |
| 14***38 | Tire & Rim Group; -Lh | 1 |
165-4902 Tire & Rim Gp -Heavy-Duty, Rh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 16***02 | Tire & Rim Group; -Heavy-Duty, Rh | 1 |
188-0127 Tire & Rim Gp -Rh
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***33 | Tire; (12-16.5) | 1 |
142-9025 Tire & Rim Gp -Rh
| 14***26 | Tire; (12-R16.5) | 1 |
| 14***59 | Wheel As | 1 |
| 14***25 | Tire & Rim Group; -Rh | 1 |
185-8677 Tire & Rim Gp -Rh
| 15***99 | Valve As-Tire | 1 |
| 18***77 | Tire & Rim Group; -Rh | 1 |
| 18***35 | Tire; (305-546) | 1 |
165-4906 Tire & Rim Gp -Heavy-Duty, Lh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 16***06 | Tire & Rim Group; -Heavy-Duty, Lh | 1 |
185-9931 Tire & Rim Gp -Rh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***31 | Tire & Rim Group; -Rh | 1 |
142-9031 Tire & Rim Gp -Rh
| 14***81 | Wheel As | 1 |
| 14***27 | Tire; (8.25-15) | 1 |
| 14***31 | Tire & Rim Group; -Rh | 1 |
188-0118 Tire & Rim Gp -Lh
| 15***99 | Valve As-Tire | 1 |
| 18***35 | Tire; (305-546) | 1 |
| 18***37 | Wheel As | 1 |
185-8676 Tire & Rim Gp -Lh
| 15***99 | Valve As-Tire | 1 |
| 18***76 | Tire & Rim Group; -Lh | 1 |
| 18***35 | Tire; (305-546) | 1 |
188-0126 Tire & Rim Gp -Lh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***33 | Tire; (12-16.5) | 1 |
185-9930 Tire & Rim Gp -Lh
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***30 | Tire & Rim Group; -Lh | 1 |
154-3979 Tire & Rim Gp -Rh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 15***79 | Tire & Rim Group; -Rh | 1 |
185-8674 Tire & Rim Gp -Lh
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 16***09 | Tire; (12-16.5) | 1 |
154-3978 Tire & Rim Gp -Lh
| 14***81 | Wheel As | 1 |
| 14***27 | Tire; (8.25-15) | 1 |
| 15***99 | Valve As-Tire | 1 |
154-3980 Tire & Rim Gp -Lh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 15***80 | Tire & Rim Group; -Lh | 1 |
199-5438 Tire & Rim Gp -Lh
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***33 | Tire; (12-16.5) | 1 |
154-3981 Tire & Rim Gp -Rh
| 14***59 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 15***81 | Tire & Rim Group; -Rh | 1 |
188-0119 Tire & Rim Gp -Rh
| 15***99 | Valve As-Tire | 1 |
| 18***35 | Tire; (305-546) | 1 |
| 18***36 | Wheel As | 1 |
185-8675 Tire & Rim Gp -Rh
| 15***99 | Valve As-Tire | 1 |
| 18***75 | Tire & Rim Group; -Rh | 1 |
| 18***35 | Tire; (305-546) | 1 |
185-9928 Tire & Rim Gp -Lh
| 15***99 | Valve As-Tire | 1 |
| 18***28 | Tire & Rim Group; -Lh | 1 |
| 18***35 | Tire; (305-546) | 1 |
185-8666 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***66 | Wheel & Tire Ar; -Heavy Duty | 1 |
| 18***76 | Tire & Rim Group; -Lh | 2 |
187-3239 Wheel & Tire Ar
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***39 | Wheel & Tire Ar | 1 |
| 18***18 | Tire & Rim Group; -Lh | 2 |
165-4903 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 16***01 | Tire & Rim Group; -Heavy-Duty, Lh | 2 |
| 16***02 | Tire & Rim Group; -Heavy-Duty, Rh | 2 |
159-5761 Wheel & Tire Ar -Solid
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 15***80 | Tire & Rim Group; -Lh | 2 |
| 15***81 | Tire & Rim Group; -Rh | 2 |
165-4898 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 15***64 | Wheel & Tire Group; (Lh) | 2 |
| 15***65 | Wheel As-Lh | 1 |
154-3972 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 14***27 | Tire & Rim Group; -Lh | 2 |
| 14***31 | Tire & Rim Group; -Rh | 2 |
185-8663 Wheel & Tire Ar -Low Side Wall
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***63 | Wheel & Tire Ar; -Low Side Wall | 1 |
| 18***74 | Tire & Rim Group; -Lh | 2 |
185-9939 Wheel & Tire Ar -Kit
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***30 | Tire & Rim Group; -Lh | 2 |
| 18***31 | Tire & Rim Group; -Rh | 2 |
154-3973 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 15***73 | Wheel & Tire Ar; -Heavy Duty | 1 |
| 15***78 | Tire & Rim Group; -Lh | 2 |
187-3238 Wheel & Tire Ar -Low Side Wall
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***38 | Wheel & Tire Ar; -Low Side Wall | 1 |
| 18***16 | Tire & Rim Group; -Lh | 2 |
142-7494 Wheel & Tire Ar -Pneumatic
| 14***94 | Wheel & Tire Ar; -Pneumatic | 1 |
| 15***99 | Valve As-Tire | 1 |
| 17***70 | Wheel As | 1 |
187-3237 Wheel & Tire Ar -Low Side Wall
| 15***62 | Wheel As; (8x16, Solid Tire) | 4 |
| 18***37 | Wheel & Tire Ar; -Low Side Wall | 1 |
142-8646 Wheel & Tire Ar
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 14***46 | Wheel & Tire Ar | 1 |
| 14***38 | Tire & Rim Group; -Lh | 2 |
188-0111 Wheel & Tire Ar
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***11 | Wheel & Tire Ar | 1 |
| 18***24 | Tire & Rim Group; -Lh | 2 |
178-2256 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 16***06 | Tire & Rim Group; -Heavy-Duty, Lh | 2 |
| 16***07 | Tire & Rim Group; -Heavy-Duty, Rh | 2 |
159-5763 Wheel & Tire Ar -Segmented
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 15***63 | Wheel & Tire Ar; -Segmented | 1 |
| 18***30 | Tire-Solid; (33x6x8) | 4 |
185-8667 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***67 | Wheel & Tire Ar; -Heavy Duty | 1 |
| 18***28 | Tire & Rim Group; -Lh | 2 |
142-7495 Wheel & Tire Ar -Pneumatic
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 14***95 | Wheel & Tire Ar; -Pneumatic | 1 |
| 14***28 | Tire & Rim Group; -Lh | 2 |
185-8662 Wheel & Tire Ar -Low Side Wall
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***62 | Wheel & Tire Ar; -Low Side Wall | 1 |
| 19***38 | Tire & Rim Group; -Lh | 2 |
Service Equipment And Supplies
166-8836 Film Gp
| 16***36 | Film Group | 1 |
166-8837 Film Gp
| 16***37 | Film Group | 1 |
166-8835 Film Gp
| 16***35 | Film Group | 1 |
177-2955 Kit-Preventive Maintenance
| 17***55 | Kit-Preventive Maintenance | 1 |
179-1984 Plate & Film Gp -Dutch
| 17***84 | Plate & Film Group; -Dutch | 1 |
179-1985 Plate & Film Gp -Finnish
| 17***85 | Plate & Film Group; -Finnish | 1 |
179-1990 Plate & Film Gp -Icelandic
| 17***90 | Plate & Film Group; -Icelandic | 1 |
179-1987 Plate & Film Gp -German
| 17***87 | Plate & Film Group; -German | 1 |
179-1989 Plate & Film Gp -Hebrew
| 17***89 | Plate & Film Group; -Hebrew | 1 |
179-1997 Plate & Film Gp -Russian
| 17***97 | Plate & Film Group; -Russian | 1 |
179-1981 Plate & Film Gp -Chinese
| 17***81 | Plate & Film Group; -Chinese | 1 |
179-1994 Plate & Film Gp -Norwegian
| 17***94 | Plate & Film Group; -Norwegian | 1 |
163-5016 Plate & Film Gp
| 16***16 | Plate & Film Group | 1 |
176-0614 Plate & Film Gp -Spanish
| 17***14 | Plate & Film Group; -Spanish | 1 |
192-2697 Plate & Film Gp -Hungarian
| 19***97 | Plate & Film Group; -Hungarian | 1 |
179-1998 Plate & Film Gp -Swedish
| 17***98 | Plate & Film Group; -Swedish | 1 |
179-1988 Plate & Film Gp -Greek
| 17***88 | Plate & Film Group; -Greek | 1 |
179-1986 Plate & Film Gp -French
| 17***86 | Plate & Film Group; -French | 1 |
195-6740 Plate & Film Gp
| 19***40 | Plate & Film Group | 1 |
179-1991 Plate & Film Gp -Indonesian
| 17***91 | Plate & Film Group; -Indonesian | 1 |
179-1992 Plate & Film Gp -Italian
| 17***92 | Plate & Film Group; -Italian | 1 |
179-1995 Plate & Film Gp -Polish
| 17***95 | Plate & Film Group; -Polish | 1 |
179-1982 Plate & Film Gp -Czechoslovakian
| 17***82 | Plate & Film Group; -Czechoslovakian | 1 |
158-7505 Plate & Film Gp -English
| 15***05 | Plate & Film Group; -English | 1 |
192-2698 Plate & Film Gp -Korean
| 19***98 | Plate & Film Group; -Korean | 1 |
179-1993 Plate & Film Gp -Japanese
| 17***93 | Plate & Film Group; -Japanese | 1 |
177-7929 Plate & Film Gp
| 17***29 | Plate & Film Group | 1 |
179-1983 Plate & Film Gp -Danish
| 17***83 | Plate & Film Group; -Danish | 1 |
179-1996 Plate & Film Gp -Portuguese
| 17***96 | Plate & Film Group; -Portuguese | 1 |
179-1999 Plate & Film Gp -Turkish
| 17***99 | Plate & Film Group; -Turkish | 1 |
179-1980 Plate & Film Gp -Arabic
| 17***80 | Plate & Film Group; -Arabic | 1 |
Work Tools
216-8756 Arm Gp-Material Handling
| 15***77 | Edge | 1 |
| 21***56 | Arm Group-Material Handling | 1 |
179-7201 Arm Gp-Material Handling
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***40 | Pin | 2 |
| 16***19 | Pin As | 2 |
217-4879 Bar Gp-Tooth
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 21***79 | Bar Group-Tooth | 1 |
177-1989 Blade Ar -Angling
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***80 | Blade Group-Multipurpose Bucket | 1 |
| 16***89 | Tack-Fastener | 4 |
177-1990 Blade Ar -Angling
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 17***90 | Blade Ar; -Angling | 1 |
177-1987 Blade As-Angling
| 15***37 | Edge | 1 |
| 17***87 | Blade As-Angling | 1 |
177-1988 Blade As-Angling
| 15***59 | Edge | 1 |
| 17***88 | Blade As-Angling | 1 |
177-1982 Blade Gp-Angling
| 15***77 | Edge | 1 |
| 17***82 | Blade Group-Angling | 1 |
177-1981 Blade Gp-Angling
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 17***81 | Blade Group-Angling | 1 |
279-5405 Blade Gp-Multipurpose Bucket
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
325-7069 Blade Gp-Multipurpose Bucket
| 15***86 | Bucket Group-Grapple; -Industrial | 1 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 15***12 | Cylinder Group-Grapple | 2 |
279-5406 Blade Gp-Multipurpose Bucket
| 13***85 | Edge Group-Cutting | 1 |
| 27***68 | Bucket As-General Purpose | 1 |
| 27***06 | Blade Group-Multipurpose Bucket | 1 |
279-5387 Blade Gp-Multipurpose Bucket
| 13***84 | Edge Group-Cutting | 1 |
| 27***87 | Blade Group-Multipurpose Bucket | 1 |
| 27***37 | Bucket As-Dirt | 1 |
279-5396 Blade Gp-Multipurpose Bucket
| 13***84 | Edge Group-Cutting | 1 |
| 27***64 | Bucket As-General Purpose | 1 |
| 27***96 | Blade Group-Multipurpose Bucket | 1 |
325-7048 Blade Gp-Multipurpose Bucket
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
325-7049 Blade Gp-Multipurpose Bucket
| 13***87 | Edge Group-Cutting | 1 |
| 27***76 | Bucket As-General Purpose | 1 |
| 32***49 | Blade Group-Multipurpose Bucket | 1 |
325-7059 Blade Gp-Multipurpose Bucket
| 15***84 | Bucket Group-Grapple; -Industrial | 1 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 15***12 | Cylinder Group-Grapple | 2 |
325-7038 Blade Gp-Multipurpose Bucket
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
325-7068 Blade Gp-Multipurpose Bucket
| 15***85 | Bucket Group-Grapple; -Industrial | 1 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 15***12 | Cylinder Group-Grapple | 2 |
279-5385 Blade Gp-Multipurpose Bucket
| 13***83 | Edge Group-Cutting | 1 |
| 27***85 | Blade Group-Multipurpose Bucket | 1 |
| 27***34 | Bucket As-Dirt | 1 |
279-5388 Blade Gp-Multipurpose Bucket
| 13***85 | Edge Group-Cutting | 1 |
| 27***88 | Blade Group-Multipurpose Bucket | 1 |
| 27***40 | Bucket As-Dirt | 1 |
325-7039 Blade Gp-Multipurpose Bucket
| 13***86 | Edge Group-Cutting | 1 |
| 27***72 | Bucket As-General Purpose | 1 |
| 32***39 | Blade Group-Multipurpose Bucket | 1 |
325-7058 Blade Gp-Multipurpose Bucket
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 9 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
279-5395 Blade Gp-Multipurpose Bucket
| 13***86 | Edge Group-Cutting | 1 |
| 27***95 | Blade Group-Multipurpose Bucket | 1 |
| 28***89 | Bucket As-Dirt | 1 |
159-5345 Blade Gp-Multipurpose Bucket
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***45 | Blade Group-Multipurpose Bucket | 1 |
| 16***89 | Tack-Fastener | 4 |
279-5384 Blade Gp-Multipurpose Bucket
| 13***87 | Edge Group-Cutting | 1 |
| 26***84 | Bucket Group-Dirt | 1 |
| 27***84 | Blade Group-Multipurpose Bucket | 1 |
159-5347 Blade Gp-Multipurpose Bucket
| 15***47 | Blade Group-Multipurpose Bucket | 1 |
| 19***16 | Edge | 1 |
154-5080 Blade Gp-Multipurpose Bucket
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***80 | Blade Group-Multipurpose Bucket | 1 |
| 16***89 | Tack-Fastener | 4 |
279-5441 Bucket Ar-Dirt
| 16***34 | Grapple & Cylinder Group-Utility | 1 |
| 16***77 | Bucket Group-Utility | 1 |
| 27***41 | Bucket Ar-Dirt | 1 |
279-5438 Bucket Ar-Dirt
| 13***86 | Edge Group-Cutting | 1 |
| 15***25 | Bucket Ar-Grapple; -Industrial | 1 |
| 27***38 | Bucket Ar-Dirt | 1 |
279-5435 Bucket Ar-Dirt
| 13***85 | Edge Group-Cutting | 1 |
| 15***24 | Bucket Ar-Grapple | 1 |
| 27***35 | Bucket Ar-Dirt | 1 |
285-6090 Bucket Ar-Dirt
| 16***34 | Grapple & Cylinder Group-Utility | 1 |
| 16***78 | Bucket Group-Utility | 1 |
| 28***90 | Bucket Ar-Dirt, Turbocharger | 1 |
268-4083 Bucket Ar-Dirt
| 13***84 | Edge Group-Cutting | 1 |
| 15***23 | Bucket Ar-Grapple | 1 |
| 26***83 | Bucket Ar-Dirt | 1 |
279-5377 Bucket Ar-General Purpose
| 19***24 | Edge Group-Cutting | 1 |
| 27***77 | Bucket Ar-General Purpose | 1 |
| 27***29 | Bucket As-Light Material | 1 |
279-5365 Bucket Ar-General Purpose
| 27***65 | Bucket Ar-General Purpose | 1 |
| 28***99 | Bucket Group-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
279-5366 Bucket Ar-General Purpose
| 27***66 | Bucket Ar-General Purpose | 1 |
| 28***02 | Bucket Group-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
279-5378 Bucket Ar-General Purpose
| 15***05 | Bucket Group-Multipurpose | 1 |
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
279-5369 Bucket Ar-General Purpose
| 27***69 | Bucket Ar-General Purpose | 1 |
| 28***00 | Bucket Ar-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
279-5373 Bucket Ar-General Purpose
| 13***86 | Edge Group-Cutting | 1 |
| 27***73 | Bucket Ar-General Purpose | 1 |
| 27***21 | Bucket As-Light Material | 1 |
279-5374 Bucket Ar-General Purpose
| 13***87 | Edge Group-Cutting | 1 |
| 27***74 | Bucket Ar-General Purpose | 1 |
| 27***24 | Bucket As-Light Material | 1 |
279-5370 Bucket Ar-General Purpose
| 27***70 | Bucket Ar-General Purpose | 1 |
| 28***01 | Bucket Ar-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
157-7225 Bucket Ar-Grapple -Industrial
| 13***84 | Edge Group-Cutting | 1 |
| 15***04 | Bucket Ar-Multipurpose | 1 |
| 15***25 | Bucket Ar-Grapple; -Industrial | 1 |
165-8779 Bucket Ar-Grapple
| 13***86 | Edge Group-Cutting | 1 |
| 15***10 | Bucket Ar-Multipurpose | 1 |
| 16***79 | Bucket Ar-Grapple | 1 |
285-6093 Bucket Ar-Grapple
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
| 16***36 | Cover Group-Lines | 1 |
285-6112 Bucket Ar-Grapple
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
157-7227 Bucket Ar-Grapple
| 13***85 | Edge Group-Cutting | 1 |
| 15***08 | Bucket Ar-Multipurpose | 1 |
| 15***27 | Bucket Ar-Grapple; -Industrial | 1 |
157-7226 Bucket Ar-Grapple
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 15***04 | Bucket Ar-Multipurpose | 1 |
157-7224 Bucket Ar-Grapple
| 15***09 | Bucket Group-Multipurpose | 1 |
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
217-6230 Bucket Ar-Grapple
| 13***84 | Edge Group-Cutting | 1 |
| 21***30 | Bucket Ar-Grapple | 1 |
| 27***82 | Bucket Ar-Multipurpose | 1 |
158-6095 Bucket Ar-Grapple
| 14***99 | Tooth Group-Uni | 8 |
| 15***08 | Bucket Ar-Multipurpose | 1 |
| 15***95 | Bucket Ar-Grapple; -Industrial | 1 |
285-6111 Bucket Ar-Grapple
| 13***85 | Edge Group-Cutting | 1 |
| 27***90 | Bucket Ar-Multipurpose | 1 |
| 28***11 | Bucket Ar-Grapple | 1 |
165-8780 Bucket Ar-Grapple -Utility
| 14***99 | Tooth Group-Uni | 8 |
| 15***10 | Bucket Ar-Multipurpose | 1 |
| 16***80 | Bucket Ar-Grapple; -Utility | 1 |
217-6229 Bucket Ar-Grapple
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 21***29 | Bucket Ar-Grapple | 1 |
157-7223 Bucket Ar-Grapple
| 15***07 | Bucket Group-Multipurpose | 1 |
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
285-6104 Bucket Ar-Grapple
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
| 16***36 | Cover Group-Lines | 1 |
279-5420 Bucket Ar-Light Material
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
| 16***36 | Cover Group-Lines | 1 |
279-5425 Bucket Ar-Light Material
| 13***86 | Edge Group-Cutting | 1 |
| 27***98 | Bucket Ar-Multipurpose | 1 |
| 27***25 | Bucket Ar-Light Material | 1 |
279-5430 Bucket Ar-Light Material
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
279-5401 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***01 | Bucket Ar-Multipurpose | 1 |
325-7060 Bucket Ar-Multipurpose
| 19***22 | Edge | 1 |
| 32***60 | Bucket Ar-Multipurpose | 1 |
279-5390 Bucket Ar-Multipurpose
| 19***22 | Edge | 1 |
| 27***90 | Bucket Ar-Multipurpose | 1 |
279-5380 Bucket Ar-Multipurpose
| 14***04 | Bucket As-Dirt | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
279-5392 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***92 | Bucket Ar-Multipurpose | 1 |
279-5398 Bucket Ar-Multipurpose
| 14***35 | Edge | 1 |
| 27***98 | Bucket Ar-Multipurpose | 1 |
154-5008 Bucket Ar-Multipurpose
| 13***87 | Edge Group-Cutting | 1 |
| 15***08 | Bucket Ar-Multipurpose | 1 |
| 27***03 | Bucket Ar-Multipurpose | 1 |
154-5048 Bucket Ar-Multipurpose
| 14***36 | Edge | 1 |
| 15***48 | Bucket Ar-Multipurpose | 1 |
325-7040 Bucket Ar-Multipurpose
| 14***35 | Edge | 1 |
| 32***40 | Bucket Ar-Multipurpose | 1 |
325-7046 Bucket Ar-Multipurpose
| 14***36 | Edge | 1 |
| 32***46 | Bucket Ar-Multipurpose | 1 |
325-7055 Bucket Ar-Multipurpose
| 14***37 | Edge | 1 |
| 32***55 | Bucket Ar-Multipurpose | 1 |
279-5391 Bucket Ar-Multipurpose
| 14***34 | Edge | 1 |
| 27***91 | Bucket Ar-Multipurpose | 1 |
154-5010 Bucket Ar-Multipurpose
| 15***10 | Bucket Ar-Multipurpose | 1 |
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
325-7066 Bucket Ar-Multipurpose
| 14***35 | Edge | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
| 32***66 | Bucket Ar-Multipurpose | 1 |
325-7070 Bucket Ar-Multipurpose
| 14***36 | Edge | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
| 32***70 | Bucket Ar-Multipurpose | 1 |
154-5004 Bucket Ar-Multipurpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 9 |
| 15***04 | Bucket Ar-Multipurpose | 1 |
325-7065 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***75 | Bucket As-General Purpose | 1 |
279-5400 Bucket Ar-Multipurpose
| 14***36 | Edge | 1 |
| 27***00 | Bucket Ar-Multipurpose | 1 |
325-7056 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***71 | Bucket As-General Purpose | 1 |
279-5381 Bucket Ar-Multipurpose
| 14***37 | Edge | 1 |
| 27***81 | Bucket Ar-Multipurpose | 1 |
325-7035 Bucket Ar-Multipurpose
| 14***36 | Edge | 1 |
| 32***35 | Bucket Ar-Multipurpose | 1 |
325-7036 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 32***36 | Bucket Ar-Multipurpose, Protective Cover | 1 |
154-5046 Bucket Ar-Multipurpose
| 13***85 | Edge Group-Cutting | 1 |
| 15***46 | Bucket Ar-Multipurpose | 1 |
| 28***99 | Bucket Group-Utility | 1 |
325-7045 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***63 | Bucket As-General Purpose | 1 |
279-5399 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***99 | Bucket Ar-Multipurpose | 1 |
154-5050 Bucket Ar-Multipurpose
| 15***27 | Bucket As-Dirt | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***50 | Bucket Ar-Multipurpose | 1 |
279-5403 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***03 | Bucket Ar-Multipurpose | 1 |
279-5382 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 18***16 | Bucket As-Dirt | 1 |
325-7050 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***67 | Bucket As-General Purpose | 1 |
279-5402 Bucket Ar-Multipurpose
| 14***37 | Edge | 1 |
| 27***02 | Bucket Ar-Multipurpose | 1 |
154-5049 Bucket Ar-Multipurpose
| 14***35 | Edge | 1 |
| 15***49 | Bucket Ar-Multipurpose | 1 |
154-5047 Bucket Ar-Multipurpose
| 13***86 | Edge Group-Cutting | 1 |
| 15***47 | Bucket Ar-Multipurpose | 1 |
| 28***02 | Bucket Group-Utility | 1 |
154-5045 Bucket Ar-Multipurpose
| 13***84 | Edge Group-Cutting | 1 |
| 15***45 | Bucket Ar-Multipurpose | 1 |
| 28***96 | Bucket Group-Utility | 1 |
285-6100 Bucket Ar-Utility
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***87 | Bucket As-Grapple; -Industrial | 1 |
| 16***89 | Tack-Fastener | 4 |
285-6101 Bucket Ar-Utility
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***88 | Bucket As-Grapple | 1 |
| 16***89 | Tack-Fastener | 4 |
285-6095 Bucket Ar-Utility
| 14***37 | Edge | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
| 28***95 | Bucket Ar-Utility | 1 |
165-6157 Bucket As-Dirt
| 14***37 | Edge | 1 |
| 16***57 | Bucket As-Dirt | 1 |
279-5433 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***28 | Bucket As-Light Material | 1 |
268-4089 Bucket As-Dirt
| 22***82 | Edge | 1 |
| 26***89 | Bucket As-Dirt | 1 |
279-5436 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***37 | Bucket As-Utility | 1 |
| 16***89 | Tack-Fastener | 4 |
152-0227 Bucket As-Dirt
| 15***27 | Bucket As-Dirt | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
141-6704 Bucket As-Dirt
| 14***04 | Bucket As-Dirt | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***89 | Bucket As-Grapple | 1 |
285-6089 Bucket As-Dirt
| 13***84 | Edge Group-Cutting | 1 |
| 16***56 | Bucket As-Dirt | 1 |
| 28***89 | Bucket As-Dirt | 1 |
279-5439 Bucket As-Dirt
| 14***35 | Edge | 1 |
| 27***39 | Bucket As-Dirt | 1 |
279-5437 Bucket As-Dirt
| 14***35 | Edge | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
| 27***37 | Bucket As-Dirt | 1 |
188-2716 Bucket As-Dirt
| 18***16 | Bucket As-Dirt | 1 |
| 19***22 | Edge | 1 |
279-5440 Bucket As-Dirt
| 14***36 | Edge | 1 |
| 27***40 | Bucket As-Dirt | 1 |
165-6156 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***56 | Bucket As-Dirt | 1 |
| 16***89 | Tack-Fastener | 4 |
188-3526 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 18***26 | Bucket As-Dirt | 1 |
279-5434 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***33 | Bucket As-Utility | 1 |
| 16***89 | Tack-Fastener | 4 |
285-6088 Bucket As-Dirt
| 14***37 | Edge | 1 |
| 28***88 | Bucket As-Dirt | 1 |
279-5372 Bucket As-General Purpose
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***42 | Bucket As-Grapple; -Industrial | 1 |
279-5371 Bucket As-General Purpose
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***41 | Bucket As-Grapple; -Industrial | 1 |
141-6705 Bucket As-General Purpose
| 13***85 | Edge Group-Cutting | 1 |
| 14***05 | Bucket As-General Purpose | 1 |
| 16***57 | Bucket As-Dirt | 1 |
279-5363 Bucket As-General Purpose
| 14***99 | Tooth Group-Uni | 8 |
| 16***53 | Bucket As-General Purpose | 1 |
| 27***63 | Bucket As-General Purpose | 1 |
165-6154 Bucket As-General Purpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***54 | Bucket As-General Purpose | 1 |
| 16***89 | Tack-Fastener | 4 |
279-5376 Bucket As-General Purpose
| 11***83 | Boss; (M10x1.5-Thd) | 4 |
| 14***36 | Edge | 1 |
| 16***34 | Grapple & Cylinder Group-Utility | 1 |
279-5375 Bucket As-General Purpose
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***43 | Bucket As-Grapple | 1 |
165-6153 Bucket As-General Purpose
| 13***86 | Edge Group-Cutting | 1 |
| 16***53 | Bucket As-General Purpose | 1 |
| 18***26 | Bucket As-Dirt | 1 |
279-5364 Bucket As-General Purpose
| 13***85 | Edge Group-Cutting | 1 |
| 16***53 | Bucket As-General Purpose | 1 |
| 27***64 | Bucket As-General Purpose | 1 |
279-5367 Bucket As-General Purpose
| 14***99 | Tooth Group-Uni | 8 |
| 16***54 | Bucket As-General Purpose | 1 |
| 27***67 | Bucket As-General Purpose | 1 |
279-5368 Bucket As-General Purpose
| 13***86 | Edge Group-Cutting | 1 |
| 16***54 | Bucket As-General Purpose | 1 |
| 27***68 | Bucket As-General Purpose | 1 |
169-8943 Bucket As-Grapple
| 15***12 | Pin | 2 |
| 15***70 | Clam As-Multipurpose Bucket | 1 |
| 15***47 | Blade Group-Multipurpose Bucket | 1 |
169-8941 Bucket As-Grapple
| 14***32 | Clam As-Multipurpose Bucket | 1 |
| 15***12 | Pin | 2 |
| 15***45 | Blade Group-Multipurpose Bucket | 1 |
169-8942 Bucket As-Grapple
| 14***05 | Bearing-Sleeve | 4 |
| 14***36 | Edge | 1 |
| 15***12 | Pin | 1 |
156-0888 Bucket As-Grapple
| 15***88 | Bucket As-Grapple | 1 |
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
156-0887 Bucket As-Grapple
| 11***83 | Boss; (M10x1.5-Thd) | 4 |
| 14***37 | Edge | 1 |
| 15***87 | Bucket As-Grapple; -Industrial | 1 |
156-0889 Bucket As-Grapple
| 13***87 | Edge Group-Cutting | 1 |
| 15***89 | Bucket As-Grapple | 1 |
| 16***15 | Bucket As-Light Material | 1 |
217-6226 Bucket As-Grapple
| 14***32 | Clam As-Multipurpose Bucket | 1 |
| 15***12 | Pin | 2 |
| 21***26 | Bucket As-Grapple | 1 |
217-6227 Bucket As-Grapple
| 15***12 | Pin | 2 |
| 15***53 | Clam As-Multipurpose Bucket | 1 |
| 21***27 | Bucket As-Grapple | 1 |
164-7415 Bucket As-Light Material
| 15***12 | Pin | 2 |
| 15***70 | Clam As-Multipurpose Bucket | 1 |
| 16***15 | Bucket As-Light Material | 1 |
279-5429 Bucket As-Light Material
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***29 | Bucket As-Light Material | 1 |
164-7417 Bucket As-Light Material
| 15***12 | Pin | 2 |
| 16***17 | Bucket As-Light Material | 1 |
| 19***08 | Clam As-Multipurpose Bucket | 1 |
279-5428 Bucket As-Light Material
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***28 | Bucket As-Light Material | 1 |
279-5423 Bucket As-Light Material
| 11***83 | Boss; (M10x1.5-Thd) | 1 |
| 13***84 | Edge Group-Cutting | 1 |
| 13***94 | Edge-Cutting | 1 |
279-5424 Bucket As-Light Material
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***24 | Bucket As-Light Material | 1 |
279-5422 Bucket As-Light Material
| 13***86 | Edge Group-Cutting | 1 |
| 16***47 | Bucket As-Utility | 1 |
| 27***22 | Bucket As-Light Material | 1 |
279-5421 Bucket As-Light Material
| 11***83 | Boss; (M10x1.5-Thd) | 4 |
| 13***85 | Edge Group-Cutting | 1 |
| 13***95 | Edge-Cutting | 1 |
285-6097 Bucket As-Utility
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
165-8747 Bucket As-Utility
| 15***35 | Plate-Instruction; (Load Capacity) | 1 |
| 16***47 | Bucket As-Utility | 1 |
| 16***89 | Tack-Fastener | 4 |
285-6103 Bucket As-Utility
| 09***07 | Bolt; (M16x2x120-mm) | 2 |
| 11***83 | Boss; (M10x1.5-Thd) | 4 |
| 13***79 | Washer; (11x32x3-mm Thk) | 2 |
165-8832 Bucket As-Utility
| 14***05 | Bearing-Sleeve | 4 |
| 14***35 | Edge | 1 |
| 15***38 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
285-6098 Bucket As-Utility
| 09***07 | Bolt; (M16x2x120-mm) | 2 |
| 11***83 | Boss; (M10x1.5-Thd) | 4 |
| 13***79 | Washer; (11x32x3-mm Thk) | 2 |
165-8746 Bucket As-Utility
| 16***46 | Bucket As-Utility | 1 |
165-8833 Bucket As-Utility
| 14***05 | Bearing-Sleeve | 4 |
| 14***36 | Edge | 1 |
| 15***38 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
165-8837 Bucket As-Utility
| 14***05 | Bearing-Sleeve | 4 |
| 15***38 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
| 16***30 | Plate-Identification; (Cat) | 2 |
165-8835 Bucket As-Utility
| 14***05 | Bearing-Sleeve | 4 |
| 14***37 | Edge | 1 |
| 15***38 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
152-0231 Bucket Gp-Dirt
| 15***31 | Bucket Group-Dirt | 1 |
| 16***28 | Plate | 1 |
| 5C***53 | Bolt (M6x1.00x16mm); (M6x1x16mm Thk) | 5 |
188-2719 Bucket Gp-Dirt
| 13***94 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 8 |
| 18***19 | Bucket Group-Dirt | 1 |
268-4084 Bucket Gp-Dirt
| 13***95 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 8 |
| 26***84 | Bucket Group-Dirt | 1 |
152-0232 Bucket Gp-Dirt
| 13***93 | Edge-Cutting | 1 |
| 15***32 | Bucket Group-Dirt | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 6 |
152-0228 Bucket Gp-General Purpose
| 15***28 | Bucket Group-General Purpose | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 7 |
| 19***24 | Edge-Cutting | 1 |
152-0225 Bucket Gp-General Purpose
| 13***96 | Edge-Cutting | 1 |
| 15***25 | Bucket Group-General Purpose | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 11 |
152-0229 Bucket Gp-General Purpose
| 15***29 | Bucket Group-General Purpose | 1 |
| 16***95 | Washer; (16.5x71.5x3-mm Thk) | 6 |
| 16***77 | Edge As; (Polyethylene) | 1 |
152-0226 Bucket Gp-General Purpose
| 13***97 | Edge-Cutting | 1 |
| 15***26 | Bucket Group-General Purpose | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 11 |
165-8729 Bucket Gp-Grapple
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 15***12 | Cylinder Group-Grapple | 2 |
| 16***87 | Lines Group-Grapple; -Industrial | 1 |
156-0886 Bucket Gp-Grapple
| 15***86 | Bucket Group-Grapple; -Industrial | 1 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 15***12 | Cylinder Group-Grapple | 2 |
156-0884 Bucket Gp-Grapple
| 15***84 | Bucket Group-Grapple; -Industrial | 1 |
| 16***95 | Washer; (16.5x71.5x3-mm Thk) | 7 |
| 16***78 | Edge As; (Polyethylene) | 1 |
156-0885 Bucket Gp-Grapple
| 15***85 | Bucket Group-Grapple; -Industrial | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 11 |
| 19***24 | Edge-Cutting | 1 |
217-6228 Bucket Gp-Grapple
| 16***34 | Grapple & Cylinder Group-Utility | 1 |
| 16***37 | Fork Group-Utility | 1 |
| 21***28 | Bucket Group-Grapple | 1 |
165-8730 Bucket Gp-Grapple
| 16***30 | Bucket Group-Grapple; -0.51 Cu M | 1 |
| 16***34 | Grapple & Cylinder Group-Utility | 1 |
| 16***36 | Fork Group-Utility | 1 |
279-5359 Bucket Gp-Grapple -Industrial
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***14 | Fork Group-Grapple; -Industrial | 9 |
| 27***75 | Cylinder Group-Grapple; -Industrial | 2 |
164-7413 Bucket Gp-Light Material
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***13 | Bucket Group-Light Material | 1 |
| 16***14 | Fork Group-Grapple; -Industrial | 2 |
279-5397 Bucket Gp-Multipurpose
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
325-7067 Bucket Gp-Multipurpose
| 22***29 | Positioner Group-Fork | 1 |
| 32***67 | Bucket Group-Multipurpose | 1 |
325-7037 Bucket Gp-Multipurpose
| 16***80 | Positioner Group-Fork | 1 |
| 32***37 | Bucket Group-Multipurpose | 1 |
279-5383 Bucket Gp-Multipurpose
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
325-7047 Bucket Gp-Multipurpose
| 16***80 | Positioner Group-Fork | 1 |
| 32***47 | Bucket Group-Multipurpose | 1 |
279-5404 Bucket Gp-Multipurpose
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 9 |
| 27***04 | Bucket Group-Multipurpose | 1 |
325-7057 Bucket Gp-Multipurpose
| 16***80 | Positioner Group-Fork | 1 |
| 32***57 | Bucket Group-Multipurpose | 1 |
154-5007 Bucket Gp-Multipurpose
| 15***07 | Bucket Group-Multipurpose | 1 |
| 28***10 | Fork Group-Grapple | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
279-5389 Bucket Gp-Multipurpose
| 16***54 | Tine | 1 |
| 27***89 | Bucket Group-Multipurpose | 1 |
| 3E***70 | Pin; (Spring) | 1 |
154-5009 Bucket Gp-Multipurpose
| 15***09 | Bucket Group-Multipurpose | 1 |
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
154-5005 Bucket Gp-Multipurpose
| 15***05 | Bucket Group-Multipurpose | 1 |
| 28***05 | Fork Group-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
285-6102 Bucket Gp-Utility
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***44 | Fork As; (Utility) | 1 |
285-6099 Bucket Gp-Utility
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 9 |
| 16***39 | Fork Group-Utility | 1 |
165-8836 Bucket Gp-Utility
| 16***36 | Bucket Group-Utility | 1 |
| 16***41 | Tine | 1 |
| 9R***59 | Clip | 1 |
285-6096 Bucket Gp-Utility
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 7 |
| 16***38 | Fork Group-Utility | 1 |
165-8777 Bucket Gp-Utility
| 16***77 | Bucket Group-Utility | 1 |
| 22***29 | Positioner Group-Fork | 1 |
165-8778 Bucket Gp-Utility
| 16***78 | Bucket Group-Utility | 1 |
| 22***29 | Positioner Group-Fork | 1 |
242-9999 Carriage & Fork Ar
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 7 |
| 24***99 | Carriage & Fork Ar | 1 |
353-1694 Carriage & Fork Ar
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***89 | Tack-Fastener | 4 |
353-1696 Carriage & Fork Ar
| 16***95 | Cylinder Group-Grapple | 1 |
| 16***31 | Mounting Group-Cylinder; -Utility | 1 |
| 16***33 | Lines Group-Grapple | 1 |
243-0000 Carriage & Fork Ar
| 17***14 | Pin As | 1 |
| 17***55 | Shim; (1-mm Thk) | 1 |
| 17***56 | Shim; (2-mm Thk) | 1 |
353-1697 Carriage & Fork Ar
| 16***95 | Cylinder Group-Grapple | 1 |
| 16***31 | Mounting Group-Cylinder; -Utility | 1 |
| 16***40 | Grapple Group-Utility | 1 |
353-1693 Carriage & Fork Ar
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***89 | Tack-Fastener | 4 |
242-9998 Carriage & Fork Ar
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***45 | Fork As; (Utility) | 1 |
149-1411 Carriage As-Fork
| 14***11 | Carriage As-Fork | 1 |
| 15***11 | Pin | 4 |
| 15***35 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
237-1975 Carriage Gp-Fork
| 16***86 | Lock As | 1 |
| 16***87 | Plate Group-Roading | 2 |
| 17***15 | Film; (Reflective)(Warning) | 4 |
351-9371 Carriage Gp-Fork
| 17***47 | Pin | 1 |
| 35***71 | Carriage Group-Fork | 1 |
| 9R***01 | Pin-Cotter | 1 |
261-6681 Carriage Gp-Fork
| 03***57 | Washer; (13x26x6-mm Thk) | 2 |
| 17***53 | Plate | 2 |
| 18***97 | Plate Group-Roading; -Lh | 1 |
154-5053 Clam As-Multipurpose Bucket
| 15***53 | Clam As-Multipurpose Bucket | 1 |
| 17***14 | Film-Stripe; (Reflective, Red, White) | 1 |
| 17***15 | Film; (Reflective)(Warning) | 1 |
149-4232 Clam As-Multipurpose Bucket
| 14***32 | Clam As-Multipurpose Bucket | 1 |
| 17***14 | Film-Stripe; (Reflective, Red, White) | 1 |
| 17***15 | Film; (Reflective)(Warning) | 1 |
199-8308 Clam As-Multipurpose Bucket
| 16***63 | Motor-Electric; (12-Volt) | 1 |
| 19***08 | Clam As-Multipurpose Bucket | 1 |
| 24***23 | Head-Pump | 1 |
154-5070 Clam As-Multipurpose Bucket
| 15***70 | Clam As-Multipurpose Bucket | 1 |
| 16***63 | Motor-Electric; (12-Volt) | 1 |
| 17***33 | Head-Pump | 1 |
296-0582 Conversion Gp-Work Tool -Kit, High Flow
| 18***76 | Step As | 1 |
| 29***82 | Conversion Group-Work Tool; -Kit, High Flow | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 6 |
241-8673 Conversion Gp-Work Tool -Kit, High Flow
| 17***41 | Spring | 4 |
| 17***73 | Plate As | 1 |
| 24***73 | Conversion Group-Work Tool; -Kit, High Flow | 1 |
188-0142 Coupler Gp-Quick
| 18***42 | Coupler Group-Quick | 1 |
| 2S***08 | Washer-Retaining; (0.531x3.25x0.438-In Thk) | 2 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 1 |
142-9080 Coupler Gp-Quick
| 14***80 | Coupler Group-Quick | 1 |
| 18***86 | Step As | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
162-5236 Cover Gp-Lines
| 11***14 | Screen; (Water Tank) | 1 |
| 11***15 | Gasket | 1 |
| 16***36 | Cover Group-Lines | 1 |
197-0926 Deflector Gp-Angle Blade
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 06***51 | Clamp | 2 |
| 09***12 | Clip | 2 |
164-7424 Edge Gp-Cutting -Polyethylene
| 10***62 | Screw-Machine; (4-40x0.63-In) | 4 |
| 13***16 | Stud-Ball | 2 |
| 14***28 | Locknut; (4-40-Thd) | 4 |
135-9383 Edge Gp-Cutting
| 13***83 | Edge Group-Cutting | 1 |
| 19***06 | Cap As; (Water Tank) | 1 |
| 19***07 | Fitting-Drain | 1 |
135-9386 Edge Gp-Cutting
| 13***86 | Edge Group-Cutting | 1 |
| 20***98 | Knob-Control; (Temperature Select) | 1 |
| 23***62 | Cable-Control | 1 |
135-9385 Edge Gp-Cutting
| 13***85 | Edge Group-Cutting | 1 |
149-5741 Edge Gp-Cutting
| 14***76 | Armrest Group | 1 |
| 14***88 | Plate | 2 |
| 14***41 | Edge Group-Cutting | 1 |
135-9384 Edge Gp-Cutting
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 13***84 | Edge Group-Cutting | 1 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
177-1909 Edge Gp-Cutting -Polyethylene
| 17***14 | Box As-Tool | 1 |
| 17***09 | Edge Group-Cutting; -Polyethylene | 1 |
| 5G***71 | Boss; (M6x1-6h-Thd) | 5 |
135-9387 Edge Gp-Cutting
| 11***85 | Bumper | 2 |
| 13***87 | Edge Group-Cutting | 1 |
| 14***76 | Armrest Group | 1 |
195-7124 Edge Gp-Cutting
| 19***24 | Edge Group-Cutting | 1 |
| 22***96 | Seal-O-Ring | 2 |
165-8727 Fork Ar-Grapple -Utility
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 15***53 | Grommet | 1 |
| 16***27 | Fork Ar-Grapple; -Utility | 1 |
163-4812 Fork Ar-Grapple -Industrial
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 15***53 | Grommet | 1 |
| 16***12 | Fork Ar-Grapple; -Industrial | 1 |
162-8139 Fork Ar-Grapple -Industrial
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 15***53 | Grommet | 1 |
| 16***39 | Fork Ar-Grapple; -Industrial | 1 |
165-8728 Fork Ar-Grapple -Utility
| 11***60 | Strap | 1 |
| 14***87 | Valve Group-Pilot; -Joystick | 1 |
| 16***28 | Fork Ar-Grapple; -Utility | 1 |
279-5360 Fork Ar-Grapple -Industrial
| 11***60 | Strap | 1 |
| 14***89 | Valve Group-Pilot | 1 |
| 19***92 | Bracket As | 1 |
279-5350 Fork Ar-Grapple -Industrial
| 11***60 | Strap | 1 |
| 14***89 | Valve Group-Pilot | 1 |
| 14***81 | Bracket | 1 |
285-6114 Fork Ar-Grapple -Utility
| 11***60 | Strap | 1 |
| 14***81 | Bracket | 1 |
| 17***36 | Valve Group-Pilot | 1 |
285-6115 Fork Ar-Grapple -Utility
| 11***60 | Strap | 1 |
| 14***81 | Bracket | 1 |
| 14***25 | Connector As. | 5 |
285-6110 Fork Gp-Grapple
| 11***60 | Strap | 1 |
| 14***55 | Horn Group-Electric | 1 |
| 14***81 | Bracket | 1 |
279-5351 Fork Gp-Grapple -Industrial
| 11***60 | Strap | 1 |
| 14***55 | Horn Group-Electric | 1 |
| 14***25 | Connector As. | 5 |
164-9614 Fork Gp-Grapple
| 11***60 | Strap | 1 |
| 14***55 | Horn Group-Electric | 1 |
| 14***81 | Bracket | 1 |
163-4811 Fork Gp-Grapple
| 11***60 | Strap | 1 |
| 14***55 | Horn Group-Electric | 1 |
| 14***81 | Bracket | 1 |
162-8140 Fork Gp-Grapple
| 11***60 | Strap | 1 |
| 14***25 | Connector As. | 5 |
| 15***43 | Connector As. | 1 |
243-0001 Fork Gp-Pallet -Kit
| 12***43 | Seal; (70-cm) | 0 |
| 12***18 | Seal; (1000-cm) | 0 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 8 |
243-0002 Fork Gp-Pallet -Kit
| 12***43 | Seal; (70-cm) | 0 |
| 12***18 | Seal; (1000-cm) | 0 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 8 |
195-8545 Fork Gp-Pallet
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 2 |
| 15***95 | Cover | 1 |
243-0003 Fork Gp-Pallet -Kit
| 10***57 | Strip; (Locking) (275cm) | 0 |
| 10***56 | Seal; (275cm) | 0 |
| 10***71 | Clevis | 1 |
151-5134 Fork Gp-Pallet
| 11***60 | Strap | 1 |
| 14***55 | Horn Group-Electric | 1 |
| 14***19 | Connector | 1 |
195-6942 Fork Gp-Pallet
| 14***70 | Cover | 1 |
| 14***71 | Cover | 1 |
| 19***42 | Fork Group-Pallet | 1 |
195-6943 Fork Gp-Pallet
| 14***68 | Plate | 1 |
| 14***70 | Cover | 1 |
| 14***72 | Plate | 1 |
149-1412 Fork Gp-Pallet
| 11***60 | Strap | 1 |
| 14***55 | Horn Group-Electric | 1 |
| 14***81 | Bracket | 1 |
161-2437 Fork Gp-Pallet
| 11***60 | Strap | 1 |
| 14***87 | Valve Group-Pilot; -Joystick | 1 |
| 14***81 | Bracket | 1 |
285-6105 Fork Gp-Utility
| 15***61 | Plate As-Fops | 1 |
| 28***05 | Fork Group-Utility | 1 |
| 5P***27 | Seal 10.65m (41.93 In.) | 0 |
165-8737 Fork Gp-Utility
| 14***90 | Cover As-Filter | 1 |
| 14***91 | Filter; (Heater Air) | 1 |
| 15***76 | Seal | 1 |
165-8732 Fork Gp-Utility
| 10***57 | Strip; (Locking) (275cm) | 0 |
| 10***56 | Seal; (275cm) | 0 |
| 10***71 | Clevis | 1 |
165-8738 Fork Gp-Utility
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 4 |
| 14***58 | Switch As-Start; (Key)(Ignition) | 1 |
| 14***19 | Film-Instruction; (Instument Panel) | 1 |
165-8736 Fork Gp-Utility
| 14***73 | Duct | 1 |
| 15***79 | Seal | 1 |
| 16***36 | Fork Group-Utility | 1 |
165-8739 Fork Gp-Utility
| 08***77 | Lamp Group-Dome; (12-Volt) | 1 |
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 2 |
| 14***18 | Film-Instruction; (Panel) | 1 |
177-1980 Frame Gp-Blade
| 15***53 | Grommet | 1 |
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 17***80 | Frame Group-Blade | 1 |
279-5352 Frame Gp-Fork -Industrial
| 11***92 | Fuse; (20 Amp) | 1 |
| 14***69 | Cover Group-Console | 1 |
| 14***89 | Heater Group-Cab | 1 |
279-5358 Frame Gp-Fork -Industrial
| 11***92 | Fuse; (20 Amp) | 1 |
| 14***69 | Cover Group-Console | 1 |
| 14***89 | Heater Group-Cab | 1 |
285-6116 Grapple & Cylinder Gp-Utility
| 10***55 | Housing-Switch; (Lights) | 1 |
| 11***19 | Switch As-Rocker; (Blower Fan Speed)(Heater Fan) | 1 |
| 11***15 | Relay As; (12-Volt)(Junction Box) | 1 |
165-8734 Grapple & Cylinder Gp-Utility
| 00***10 | Elbow | 1 |
| 11***92 | Fuse; (20 Amp) | 1 |
| 13***53 | Hose; (192.5cm) (X2) | 0 |
165-8740 Grapple Gp-Utility
| 14***70 | Clip | 8 |
| 14***74 | Valve As | 1 |
| 14***90 | Screw-Truss Head | 8 |
225-9522 Kit-Angle Blade
| 20***98 | Knob-Control; (Temperature Select) | 1 |
| 22***22 | Kit-Angle Blade | 1 |
| 23***62 | Cable-Control | 1 |
165-8488 Kit-Roading Plate & Mounting -Angle Blade
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 11***90 | Fuse; (10 Amp) | 1 |
| 15***59 | Wire As-Horn | 1 |
177-9152 Kit-Roading Plate & Mounting -Bucket
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***33 | Spacer; (11x14.3x9-mm Thk)(11x14.3x9mm Thk) | 1 |
175-4238 Lock Gp-Quick Coupler -Mechanical
| 00***10 | Elbow | 1 |
| 09***34 | Spacer; (9x20x10-mm Thk) | 2 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 3 |
184-6098 Plate Gp-Roading -Rh
| 09***34 | Spacer; (9x20x10-mm Thk) | 2 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 3 |
| 10***96 | Clip | 2 |
184-6097 Plate Gp-Roading -Lh
| 00***10 | Elbow | 1 |
| 09***34 | Spacer; (9x20x10-mm Thk) | 2 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 3 |
161-7290 Pump Gp-Diaphragm
| 09***34 | Spacer; (9x20x10-mm Thk) | 2 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 3 |
| 10***96 | Clip | 2 |
247-6742 Pump Gp-Diaphragm
| 09***25 | Pin-Clevis | 1 |
| 14***02 | Door & Mtg Group-Cab | 1 |
| 15***82 | Spring-Gas; (Non-Locking) | 1 |
177-1983 Spring Gp-Blade
| 09***25 | Pin-Clevis | 1 |
| 15***82 | Spring-Gas; (Non-Locking) | 1 |
| 15***83 | Spring As-Gas; (Locking) | 1 |
188-7733 Step Gp-Material Handling Arm
| 14***12 | Liner-Rear Wall | 1 |
| 14***52 | Insulation | 1 |
| 14***53 | Insulation | 1 |
186-3562 Step Gp-Material Handling Arm
| 00***10 | Elbow | 1 |
| 11***92 | Fuse; (20 Amp) | 1 |
| 13***53 | Hose; (192.5cm) (X2) | 0 |
173-7407 Stop Gp-Bucket -Utility
| 17***07 | Stop Group-Bucket; -Utility | 1 |
116-2001 Strainer Gp-Water
| 00***10 | Elbow | 1 |
| 11***01 | Strainer Group-Water | 1 |
| 13***53 | Hose; (192.5cm) (X2) | 0 |
166-2550 Tank & Mtg Gp-Water
| 00***10 | Elbow | 1 |
| 13***53 | Hose; (192.5cm) (X2) | 0 |
| 16***50 | Tank & Mtg Group-Water | 1 |
252-0386 Tank & Mtg Gp-Water -Kit
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 14***34 | Gasket; (Indicator Module) | 1 |
| 25***86 | Tank & Mtg Group-Water; -Kit | 1 |
166-2551 Tank Gp-Water
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 14***34 | Gasket; (Indicator Module) | 1 |
| 16***51 | Tank Group-Water | 1 |
141-4999 Tooth Gp-Uni
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 14***99 | Tooth Group-Uni | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 10 |
236 serial number reference
The PIN plate on the 236 sits at the rear of the chassis, left side, under the left lift-arm support/pivot area near the rear axle. Read the first three characters as the build/configuration prefix unique to that model and factory run; the digits after it are the sequential unit number within that prefix, so a plate reading 4YZ00678 is a base 236, unit 678 of the 4YZ run. Always confirm the full plate text with a Cat dealer before ordering parts.
| Prefix | Identifies | Notes |
|---|---|---|
| 4YZ | 236 skid steer loader (base model, single generation) | Only confirmed serial prefix for the base Cat 236 production run, roughly 2000 to 2003. Factory service and parts books split the range at unit 4000 (00001-03999 early build, 04000-and-up later build); this is a running-change split, not a separate engine or model. Powered by the Cat 3034 (3034C) naturally aspirated four-cylinder diesel, about 33 kW (44 hp) net flywheel power at 2600 rpm. Built at Caterpillar's compact-equipment plant in Sanford, North Carolina. |
Frequently asked questions
What engine does the Caterpillar 236 skid steer loader use?
A naturally aspirated Cat 3034C four-cylinder diesel, 2.96 L (181 cu in) displacement, rated at about 44 hp (33 kW) net flywheel power (roughly 59 hp / 44 kW gross) at 2600 rpm. This is the pre-turbo engine; the later 236B moved to a turbocharged 3044C DIT, so the two should not be confused.
What is the operating weight of the Caterpillar 236?
Operating weight runs roughly 6,810-7,030 lb (3,090-3,190 kg); the range reflects tire and counterweight configuration. Rated operating capacity is 1,750 lb (793 kg) standard, or about 1,850 lb (839 kg) with the optional counterweight.
What replaced the Caterpillar 236?
Caterpillar replaced the 236 with the turbocharged 236B in 2004, later updated as the 236B3. That lineage was eventually succeeded by the modern radial-lift D-series machines, the 236D and 236D3.
What 236 owners discuss
What engine does the Cat 236 actually use, and are there real quirks tied to it?
The base 236 (not the later B/B3 or D-series) runs a naturally aspirated Cat 3034C four-cylinder diesel, about 3.0 L (183 cu in) displacement, rated near 47 kW (63 hp) gross and 44 kW (59 hp) net at 2600 rpm. Hard, repeated cranking with heavy throttle pumping to get it lit traces most often to the glow plug relay or its wiring rather than a fuel or compression fault, especially in cold weather. Air worked into the fuel system after a filter change is the next most common no-start cause and needs a proper bleed at the filter head before it fires cleanly.
What hydraulic behavior shows up most in owner complaints?
This is a standard-flow machine, around 83 L/min (22 gpm) at up to about 22,750 kPa (3300 psi) loader pressure, with no high-flow option offered on the base 236. Cylinder drift on the boom or tilt function over time usually points to worn cylinder seals or a control valve spool that isn't fully seating, not a pump problem. Jerky or hesitant bucket and boom motion right after hose work or a filter change is almost always trapped air. Cycling every function through full travel several times clears it without touching the valve.
What wear patterns show up on the undercarriage and drivetrain?
The base 236 rides on tires driven through chain-and-sprocket final drives inside each axle housing. It is a wheeled skid steer, not a tracked multi-terrain loader, so wear patterns and service intervals differ from Cat's MTL siblings. Chain tension is the main upkeep item: run it loose and the tire slips under load, wearing unevenly and accelerating sprocket wear. A pull to one side or uneven tire wear more often traces to chain tension or a worn drive motor than to any adjustable alignment, since there is no steering linkage to set.
What electrical or sensor problems come up most in the field?
The single most-repeated complaint is the seat or seat-bar safety switch losing contact. The switch and its connector sit behind the seat, work loose in the mount or collect debris, and drop the machine into hydraulic lockout mid-task with nothing else wrong. A failed main power relay is also documented on early-production machines and presents as no crank, no lights, no dash activity despite a good battery. On machines running auxiliary hydraulics, a jumper harness on the loader arm has to stay connected or pilot control shuts down entirely; check that first if aux hydraulics go dead while everything else works. Because these all sit in the operator-presence and hydraulic-lockout safety circuit, have your dealer verify any interlock, relay, or harness repair before returning the machine to work.
What does a hard no-crank, no-electrical-activity complaint usually trace back to?
Forum troubleshooting starts with battery voltage and terminal condition, since a weak battery alone can mimic a bigger electrical fault on this machine. If voltage checks out, the next stops are the main circuit breaker under the cab and the main power relay, then every ground strap and connector in the starting circuit for corrosion or a backed-out pin. This generation has no onboard diagnostic display, so isolating an intermittent fault generally needs a dealer with the correct test equipment. Have your dealer verify the fault before swapping components on a guess.
What should a buyer check on a used Cat 236 before purchase?
Community buying advice centers on hours relative to visible wear rather than hours alone. A high-hour machine with tight chains and clean, non-weeping cylinders can be a better buy than a low-hour one that has been neglected. Extend every cylinder and watch for creep or sink under a held load, and check hose fittings for weeping rather than active leaks. Tire wear and evenness serve as a rough proxy for chain and axle condition. Cycle the seat switch and hydraulic lockout to confirm they engage and release cleanly, and ask for service records, since this is an older design with a large population of undocumented machines that can hide deferred maintenance. Treat a safety interlock that will not reset properly as a walk-away issue until a dealer identifies the cause.
What is the general owner consensus on reliability?
Owners describe the base 236 as a solid, low-drama machine for its size class, with most complaints tracing to age-related wiring, switches, and seals rather than the engine or hydraulic pump failing outright. Several owners rate dealer support, especially loaner machines during downtime, as a bigger factor in day-to-day satisfaction than any single mechanical trait. The recurring caution is that this is now an older design with a large high-hour population in the field, so individual machine condition and maintenance history matter more than model year alone.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 236 part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.