Caterpillarskid steer loader
Caterpillar 232B
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 232B is a wheeled, radial-lift skid steer loader in Cat's compact-to-mid-size loader class, built through the mid-2000s into the mid-2010s. The base 232B runs a Caterpillar 3024C, a 2.2 liter four-cylinder naturally aspirated diesel rated near 52 hp (39 kW) gross and 49.7 hp (37 kW) net at 2600 rpm; the later 232B Series 2 (232B2) update switched to the turbocharged Cat C2.2T version of the same engine, rated near 61 hp (45 kW) gross and 56 hp (42 kW) net. Operating weight runs roughly 3,020 to 3,060 kg (6,660 to 6,740 lb) depending on series and counterweight option, with rated operating capacity from about 793 kg (1,750 lb) on the base machine up to roughly 862 kg (1,900 lb) on Series 2. The 232B followed the earlier non-suffix Cat 232 and was succeeded by the Cat 232D around 2016. It shipped with a single-speed hydrostatic drivetrain driving chain-and-sprocket final drives, wet multi-disc brakes, a choice of 10x16.5 or 12x16.5 tires, and an optional counterweight package for higher lift capacity.
The main change across the 232B's run was the Series 2 update, which added the turbocharged C2.2T engine and pushed both power and operating weight higher while carrying over the same chassis, chain-drive final drives, and wet-disc brakes shared across the wider B-series lineup (216B, 226B, 242B). Because the two variants look nearly identical but differ in fueling and output, correct series identification matters when sourcing engine and drivetrain parts. In today's used market the 232B remains a common find valued for its mechanically simple, pre-emissions-aftertreatment powertrain, parts commonality across the B-series family, and lower purchase cost relative to the D-series machines that replaced it, making it a practical choice for general-duty loader work and rebuild-and-resell projects.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 232B specifications
Engine
| Engine model (232B, 2004-2009) | Cat 3024C, 4-cylinder diesel |
| Gross power (232B) | 38.8 kW (52 hp), SAE J1995 |
| Net power (232B) | 36.5 kW (49 hp), SAE J1349 |
| Displacement (232B) | 2.2 L / 2,216 cm³ (134 cu in) |
| Bore x stroke (232B) | 84 x 100 mm (3.3 x 3.9 in) |
| Emissions tier (232B) | Meets US EPA Tier 2 nonroad diesel standard |
| Engine model (232B Series 2, 2007-2016) | Cat C2.2 T, 4-cylinder turbocharged diesel |
| Gross power (232B Series 2) | 45.5 kW (61 hp) |
| Net power (232B Series 2) | 41.8 kW (56 hp), SAE J1349 |
| Displacement (232B Series 2) | 2.2 L / 2,196 cm³ (134 cu in) |
| Bore x stroke (232B Series 2) | 84 x 100 mm (3.3 x 3.9 in) |
| Emissions tier (232B Series 2) | Meets US EPA Tier 4 Interim equivalent / EU Stage IIIA equivalent for this power class |
Weights
| Operating weight (232B) | 3,021 kg (6,660-6,661 lb) |
| Rated operating capacity (232B) | 793 kg (1,750 lb) |
| Tipping load (232B) | 1,588-1,794 kg (3,500-3,955 lb) - varies by configuration/series |
| Operating weight (232B Series 2) | 3,056 kg (6,737 lb) |
| Rated operating capacity, standard (232B Series 2) | 862 kg (1,900 lb) |
| Rated operating capacity, with optional counterweight (232B Series 2) | 882 kg (1,945 lb) |
| Tipping load (232B Series 2) | 1,794 kg (3,956 lb) |
Dimensions
| Transport length, with bucket (232B) | 3.44 m (11.28 ft / 135 in) |
| Transport length, without bucket (232B) | 2.76 m (9.06 ft / 109 in) |
| Transport width, over tires (232B) | 1.52 m (5.00 ft / 60 in) |
| Transport height, top of cab/ROPS (232B) | 1.95-1.98 m (77-78 in) |
| Maximum operating height (232B) | 3.89 m (153 in) |
| Wheelbase (232B) | 1.09-1.10 m (43 in) |
| Ground clearance (232B) | 15.2 cm (6 in) |
| Turning radius (232B) | 2.22 m (87.5 in) |
| Transport length, with bucket (232B Series 2) | 3.43-3.44 m (11.25-11.30 ft) |
| Transport length, without bucket (232B Series 2) | 2.76 m (9.06 ft) |
| Transport width, over tires (232B Series 2) | 1.52 m (5.00 ft) |
| Transport height, top of cab (232B Series 2) | 1.96-1.98 m (6.42-6.50 ft) |
| Maximum overall height (232B Series 2) | 3.89 m (153.3 in) |
| Wheelbase (232B Series 2) | 1.09-1.10 m (3.59-3.60 ft) |
| Ground clearance (232B Series 2) | 14.5 cm (5.7 in) |
Performance
| Maximum travel speed (232B) | 11.1 km/h (6.9 mph), forward and reverse |
| Loader hydraulic flow (232B) | 59-60 L/min (15.6-15.9 gpm) |
| Hydraulic system relief pressure (232B) | 21,400 kPa (3,100 psi) |
| Breakout force, lift (232B) | 1,742 kg (3,841 lb) |
| Maximum dump angle (232B) | 50 degrees |
| Bucket rollback angle (232B) | 86.9 degrees |
| Angle of departure (232B) | 28 degrees |
| Maximum travel speed (232B Series 2) | 10.9 km/h (6.8 mph), forward and reverse |
| Loader hydraulic flow (232B Series 2) | 59.1 L/min (15.6 gpm) |
| Hydraulic system relief pressure (232B Series 2) | 23,000 kPa (3,335 psi) |
| Hydraulic power (232B Series 2) | 22.7 kW (30.4 hp) |
| Breakout force (232B Series 2) | 1,842 kg (4,060 lb) |
| Maximum dump angle (232B Series 2) | 50 degrees |
| Standard bucket capacity (232B Series 2) | 0.38 m³ (0.5 cu yd) |
Service capacities (summary)
| Fuel tank (232B) | 65.1 L (17.2 gal) |
| Hydraulic system (232B) | 55.3 L (14.6 gal) |
| Engine oil (232B) | 8.3 L (2.2 gal) |
| Cooling system (232B) | 10.2 L (2.7 gal) |
| Fuel tank (232B Series 2) | 57.9 L (15.3 gal) |
| Hydraulic system (232B Series 2) | 54.9 L (14.5 gal) |
| Engine oil (232B Series 2) | 9.8 L (2.6 gal) |
| Cooling system (232B Series 2) | 9.8 L (2.6 gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
232B fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 8.0 L (2.1 US gal) on base 232B (Cat 3024C engine, 2003-2007 production); 10.0 L (2.6 US gal) on 232B Series 2 (Cat C2.2 T engine, 2007-up) - capacity varies by series/engine change | Cat DEO (Diesel Engine Oil). Viscosity by climate per the Cat diesel engine oil chart: SAE 10W-30 for ambient -18 to 40 C (0 to 104 F); SAE 15W-40 for -10 to 50 C (14 to 122 F). Cat DEO Cold Weather SAE 0W-40 or Cat DEO-ULS SYN SAE 5W-40 for colder starts. 250-hour oil change interval. |
| Cooling system | 10.0 L (2.6 US gal) - same on both series | Extended-life antifreeze/coolant, factory filled and rated to -36 C (-33 F). Cat ELC (Extended Life Coolant), premixed 1:1 with water, is the preferred fill; supports extended service life with a one-time extender addition at mid-life. |
| Fuel tank | 65.0 L (17.0 US gal) on base 232B; 58.0 L (15.3 US gal) on 232B Series 2 - varies by series | Ultra low sulfur No. 2 diesel fuel (No. 1 or a winter blend in cold climates). No lubricant specification applies to the fuel tank. |
| Hydraulic system (total, includes tank, lines, and cylinders) | 55.0 L (14.5 US gal) - same on both series | Cat DEO, same grade used in the engine crankcase (SAE 10W-30 or 15W-40 depending on climate; SAE 0W-40 or 5W-40 synthetic for cold starts). This machine's hydrostatic drive and loader hydraulics share one fluid with the engine rather than a separate hydraulic oil. Note: current general Cat fluid guidance lists Cat HYDO Advanced as the modern preferred hydraulic oil across the product line - confirm with a dealer before switching from the factory-fill spec. |
| Hydraulic tank (reservoir only) | 35.0 L (9.2 US gal) - same on both series | Same fluid as the hydraulic system above (Cat DEO by climate grade). |
| Drive chain case, each side (this machine's chain drive takes the place of a separate final drive) | 6.0 L (1.6 US gal) per side - same on both series | Cat DEO, same grade as the engine crankcase. The drive chains run in an oil bath lubricated by engine oil rather than a dedicated gear or transmission/drive-train fluid. |
| Drive axle bearings | No service fill - sealed for life | No fluid or grease service required. The axle design uses an inner seal for permanent bearing lubrication; no daily or scheduled axle servicing is called for. |
| Grease (lift-arm pivots, pin joints, work-tool coupler) | Spec only - no fixed fill volume, applied via grease fittings | Cat Prime Application Grease, NLGI 2, lithium-complex base with molybdenum disulfide, for medium-to-high-severity pin joints on skid steer loaders. Cat Extreme Application Grease (NLGI 1 or 2, calcium-sulfonate complex) is the step-up choice for severe or high-impact duty. Grease fittings are countersunk to resist damage. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 232B maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 6,000 h |
|
Servicing the 232B beyond the schedule
Predictive Maintenance & Fluid Analysis
Schedule engine oil sampling with every 500-hour oil and filter change on the Cat 3024C, or the turbocharged C2.2T on Series 2 machines, to catch bearing and injection-pump wear early. The 232B splits lubrication between engine oil, hydraulic oil, and chain case oil, so track each separately. Rising iron or bronze readings in chain case oil signal sprocket or bearing wear before a chain actually jumps a sprocket. Pair coolant testing with cooling-system service to protect the small-displacement diesel from cavitation corrosion.
Corrective & Common Repairs
Loose hydrostatic pump mounting bolts at the flywheel housing are a recurring cause of drive-power loss on the 232B; check torque before condemning the pump. Because the machine drives through roller chains rather than a direct final drive, stretched or worn chains are a common source of side-to-side pull and should be ruled out before hydrostatic components are replaced. Injector and injection-pump wear are the typical engine complaint on the naturally aspirated 3024C; boost-hose leaks and wastegate sticking are the Series 2 turbocharged C2.2T equivalent.
Overhaul & Rebuild Points
High-hour 232B rebuilds center on the chain case (sprockets, bearings, and chain wear from constant torque reversals in skid steering), the hydrostatic pump and drive motors (swash-plate and bearing wear after repeated stall-and-reverse cycling), and the engine, where the naturally aspirated 3024C or turbocharged C2.2T typically needs injection-pump recalibration and top-end work well before a full inframe rebuild. Inspect lift-arm pivot pins, bushings, and the main frame near the pivot bosses for cracking, the heaviest cyclic load points on a skid steer this size.
Seasonal & Environment Servicing
Below-freezing starts are hard on the naturally aspirated 3024C without a working starting aid; verify glow-plug or ether function before winter and check coolant concentration for the local low temperature. Switch engine and hydraulic oil to the lighter 5W-40 grade specified for cold climates, and confirm chain case oil hasn't thickened if the machine sits outdoors. In hot, dusty, or high-debris environments, service the cab fresh-air filter and clean radiator and oil cooler fins more often than the standard interval to prevent overheating.
232B common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 231-0167 | Filter Element As-Air | Air intake service | Check fitment → |
| 231-0168 | Filter Element As-Air | Air intake service | Check fitment → |
| 1G-8878 | Filter As-Oil | Hydraulic service | Check fitment → |
| 134-0404 | Switch As-Pressure | Lubrication service | Check fitment → |
| 149-3499 | Element As-Jacket Water Heater | Scheduled service item | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
232B fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| Engine Coolant Temperature | Coolant temperature has gone above the safe operating range; light comes on with an audible alarm. | Low coolant level, a plugged radiator or cooling package, a stuck thermostat, or a faulty coolant temperature sender. | Stop the machine and idle down or shut off the engine right away. Let it cool, then check coolant level and clean debris from the radiator before restarting. |
| Engine Oil Pressure | Engine oil pressure has dropped below the safe minimum. | Low oil level, a failing oil pump, worn engine bearings, or a bad oil pressure switch. | Shut the engine down immediately, check oil level, and look for leaks before attempting a restart. |
| Hydraulic Oil Temperature | Hydraulic oil temperature has exceeded normal operating range. | Low hydraulic oil level, a plugged oil cooler, extended high-flow work tool use, or a faulty temperature sender. | Stop and let the machine idle to cool. Check hydraulic oil level and clear debris from the cooler. |
| Hydraulic Filter Restriction | Indicates a restriction (bypass) condition at the hydraulic oil filter. | A loaded/clogged hydraulic filter element, cold thick oil, or a contaminated hydraulic system. | Replace the hydraulic filter element and check hydraulic oil condition and level. |
| Air Filter Restriction | Airflow through the engine air intake is restricted. | A dirty or clogged air filter element, or a blocked intake duct. | Inspect and clean or replace the air filter element; check ducting for blockage. |
| Alternator Output | Battery charging system is not putting out proper voltage. | A failed alternator, a worn or broken drive belt, or loose/corroded battery connections. | Shut down as soon as practical; check belt condition and tension and battery terminal connections, then test alternator output. |
| Glow Plug Activation | Indicates the glow plug cold-start aid is energized during preheat. | Normal cold-start cycle; an abnormally long or flickering cycle points to a glow plug relay or wiring fault. | Wait for the indicator to go out before cranking in cold weather; if the cycle behaves abnormally, check the glow plug relay and wiring. |
| Parking Brake Engaged | Indicates the parking brake is applied. | Brake left engaged, or a brake release switch/hydraulic fault preventing release. | Confirm the brake release control is in the release position; if the light stays on, check the brake release circuit and switch. |
| Armrest Raised / Operator Out of Seat | Safety interlock indicator showing the seat bar/armrest is up or the operator is not seated; disables hydraulics and drive. | Operator not fully seated, armrest not lowered, or a faulty seat safety switch. | Sit fully in the seat and lower the armrest to reset. If the indicator stays lit with the operator seated, check the seat switch and its wiring. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
232B attachments & work tools
General-purpose and multi-purpose buckets
Standard dirt/utility buckets and 4-in-1 (multi-purpose) buckets are the most common work tool for this loader, sized to the machine's compact frame at roughly 1.7 m (66 in) width. The 4-in-1 bucket adds a clamshell jaw so it can also grade, dose, and grapple light material.
Pallet forks
Fork-frame attachments for palletized material and general lifting, rated to the loader's rated operating capacity class of roughly 790 kg (1750 lb) at standard configuration. Used for yard and building-material handling rather than heavy stacking.
Augers
Hydraulically driven auger units (direct-drive for lighter torque, planetary-drive for higher torque digging) mount to the standard quick-attach plate and run off the loader's auxiliary hydraulic circuit. Auger torque class should be matched to the machine's auxiliary flow rather than maxed out, given this is a small-frame skid steer.
Grapple attachments
Utility and root/brush grapple buckets are offered for handling brush, debris, and irregular material, using the same auxiliary hydraulic circuit that powers the bucket's clamp function. Sized to this loader's lighter operating-capacity class rather than industrial/high-capacity grapple lines.
Blades and landscape rakes
Dozer-style blades and rotary/landscape (Harley-type) rakes are used for light grading, leveling, and seedbed prep. Rakes are auxiliary-hydraulic powered; blades are typically mechanical, pin-mounted tools.
Sweepers/brooms
Rotary broom (sweeper) attachments for site cleanup and light material sweeping, powered through the standard auxiliary hydraulic couplers. Common pairing for this loader class in yard and roadway maintenance work.
Trenchers
Narrow utility trenching attachments are offered for this loader class, running off the auxiliary hydraulic circuit. Trench depth/width capability is limited by the machine's standard hydraulic flow and operating weight compared with larger-frame skid steers.
Quick-attach coupler and mounting system
The loader uses a universal skid-steer quick-attach mounting plate at the end of the lift arms, standard equipment, letting the operator tilt into and lock a work tool without leaving the cab. Hydraulic quick-connect couplers are rigidly mounted to the loader arm to power auxiliary-driven tools once the tool is pinned.
Auxiliary hydraulics for work tools
Standard auxiliary hydraulics deliver auxiliary/loader circuit flow of about 60 L/min (15.6 gpm) at a maximum system pressure near 21 400 kPa (3100 psi), which powers most bucket, fork, auger, broom, and rake attachments. Higher-demand tools such as mulchers, stump grinders, or cold planers generally need a higher-flow auxiliary circuit than this compact-frame loader provides as standard — confirm hydraulic demand against the machine's circuit before pairing a heavy-duty tool.
Counterweight and factory configuration options
A rear counterweight kit is offered to raise rated operating capacity above the base figure for better stability with heavier tools or extended-reach work; the exact capacity gain varies by configuration/series. Other factory options recorded for this loader family include an operator cab enclosure/guarding, backup alarm, rotating beacon, engine block heater, cold-weather hydraulic oil, heavy-duty battery, and custom paint.
All 232B assemblies by section
Every catalogued assembly group for the Caterpillar 232B. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
228-1773 Air Cleaner Gp
| 15***83 | Washer-Hard; (8.4x35x2.5-mm Thk) | 2 |
| 22***73 | Air Cleaner Group | 1 |
| 24***71 | Air Cleaner Group | 1 |
242-0171 Air Cleaner Gp
| 11***17 | Valve-Dust; (Air Cleaner) | 1 |
| 23***67 | Filter Element As-Air; (Primary) | 1 |
| 23***68 | Filter Element As-Air; (Secondary) | 1 |
265-4419 Kit-Debris Guard -Turbocharger, Exhaust Manifold
| 16***00 | Washer-Hard; (8x16x2-mm Thk) | 5 |
| 21***48 | Spacer; (8.8x16x4-mm Thk) | 1 |
| 26***19 | Kit-Debris Guard; -Turbocharger, Exhaust Manifold | 1 |
218-0944 Lines Gp-Air
| 21***44 | Lines Group-Air | 1 |
| 22***35 | Hose-Air | 1 |
| 5P***97 | Clamp Fumes Disposal | 1 |
228-1784 Lines Gp-Air
| 21***45 | Clamp-Hose | 1 |
| 22***78 | Clamp-Tbolt; (M5x0.8) | 1 |
| 22***84 | Lines Group-Air | 1 |
160-3568 Manifold Gp-Exhaust
| 15***92 | Nut | 2 |
| 15***26 | Manifold-Exhaust | 1 |
| 15***27 | Gasket-Exhaust | 1 |
239-0233 Manifold Gp-Exhaust
| 15***92 | Nut | 8 |
| 15***27 | Gasket-Exhaust | 1 |
| 15***28 | Bolt | 4 |
260-6143 Muffler & Converter
| 26***43 | Muffler & Converter | 1 |
254-5014 Muffler & Converter
| 25***14 | Muffler & Converter | 1 |
228-1772 Muffler & Mounting Gp
| 14***18 | Clamp-Pipe | 1 |
| 15***20 | Gasket | 1 |
| 22***70 | Muffler As | 1 |
218-0937 Muffler & Mounting Gp
| 14***18 | Clamp-Pipe | 1 |
| 15***20 | Gasket | 1 |
| 21***37 | Muffler & Mounting Group | 1 |
272-3046 Muffler Gp
| 14***18 | Clamp-Pipe | 1 |
| 22***24 | Elbow As-Exhaust | 1 |
| 27***46 | Muffler Group | 1 |
272-3049 Muffler Gp
| 14***18 | Clamp-Pipe | 1 |
| 15***20 | Gasket | 1 |
| 23***31 | Muffler As | 1 |
272-3047 Muffler Gp
| 15***20 | Gasket | 1 |
| 27***46 | Muffler Group | 1 |
| 27***47 | Muffler Group | 1 |
239-0230 Turbocharger Gp
| 06***58 | Clamp-Hose | 2 |
| 15***53 | Seal-O-Ring | 1 |
| 15***84 | Washer | 2 |
Basic Engine
246-3337 Camshaft Gp
| 15***92 | Key-Woodruff | 1 |
| 15***04 | Camshaft As | 1 |
| 15***05 | Bearing | 1 |
217-7143 Camshaft Gp
| 15***92 | Key-Woodruff | 1 |
| 15***05 | Bearing | 1 |
| 15***08 | Gear-Camshaft; (66-Teeth) | 1 |
238-9348 Cover Gp-Valve Mechanism
| 15***39 | Gauze; (Crankcase Breather) | 1 |
| 15***61 | Bolt | 2 |
| 15***62 | Bolt | 3 |
303-1467 Cover Gp-Valve Mechanism
| 06***58 | Clamp-Hose | 2 |
| 15***39 | Gauze; (Crankcase Breather) | 1 |
| 15***62 | Bolt | 3 |
217-5867 Cover Gp-Valve Mechanism
| 15***39 | Gauze; (Crankcase Breather) | 1 |
| 15***62 | Bolt | 3 |
| 15***40 | Bolt | 2 |
270-6915 Crankshaft Gp
| 15***02 | Dowel | 2 |
| 15***18 | Key | 1 |
| 15***81 | Cap As-Bearing | 1 |
217-1447 Crankshaft Gp
| 15***02 | Dowel | 8 |
| 15***18 | Key | 1 |
| 15***81 | Cap As-Bearing | 1 |
236-5052 Crankshaft Gp
| 15***02 | Dowel | 8 |
| 15***18 | Key | 1 |
| 15***81 | Cap As-Bearing | 1 |
236-5051 Cylinder Block Gp
| 15***87 | Plug | 5 |
| 15***91 | Plug | 1 |
| 15***94 | Dowel | 2 |
240-0648 Cylinder Block Gp
| 23***15 | Plug; (Sealing) | 2 |
| 23***16 | Plug; (Sealing) | 5 |
| 24***48 | Cylinder Block Group | 1 |
270-6932 Cylinder Block Gp
| 15***87 | Plug | 3 |
| 15***94 | Dowel | 2 |
| 15***95 | Dowel | 2 |
217-7395 Cylinder Block Gp
| 15***87 | Plug | 3 |
| 15***91 | Plug | 1 |
| 15***94 | Dowel | 2 |
319-7269 Cylinder Head As
| 15***54 | Seal | 4 |
| 15***56 | Pin-Cotter | 16 |
| 15***57 | Cap | 8 |
236-5127 Cylinder Head Gp
| 15***54 | Seal | 4 |
| 15***56 | Pin-Cotter | 16 |
| 15***57 | Cap | 8 |
293-2086 Cylinder Head Gp
| 15***61 | Bolt | 2 |
| 15***88 | Nut | 4 |
| 15***46 | Stud | 4 |
303-0337 Cylinder Head Gp
| 15***73 | Cap | 8 |
| 15***61 | Bolt | 2 |
| 15***88 | Nut | 4 |
236-5129 Cylinder Head Gp
| 15***88 | Bolt | 14 |
| 15***89 | Bolt | 4 |
| 18***64 | Stud | 4 |
217-1481 Cylinder Head Gp
| 15***54 | Seal | 4 |
| 15***56 | Pin-Cotter | 16 |
| 15***57 | Cap | 8 |
217-2746 Cylinder Head Gp
| 15***88 | Bolt | 14 |
| 15***89 | Bolt | 4 |
| 16***26 | Stud; (To Regulator Housing) | 2 |
229-8730 Drain Gp-Engine Oil
| 11***70 | Cap | 1 |
| 22***28 | Tee | 1 |
| 22***29 | Adapter | 1 |
217-7221 Flywheel Gp
| 15***05 | Gear-Starter; (126-Teeth) | 1 |
| 15***06 | Bolt | 6 |
| 21***21 | Flywheel Group | 1 |
246-8723 Guard Gp-Belt
| 14***94 | Bracket As | 1 |
| 20***44 | Guard-Belt | 1 |
| 22***53 | Bracket As | 1 |
217-7238 Housing Gp-Flywheel
| 13***62 | Bolt; (M10x1.5x30-mm) | 4 |
| 13***02 | Bolt | 6 |
| 15***75 | Bolt | 10 |
217-7118 Housing Gp-Front
| 15***60 | Nut | 1 |
| 15***62 | Bolt | 3 |
| 15***38 | Bolt | 4 |
246-3338 Housing Gp-Front
| 15***60 | Nut | 2 |
| 15***62 | Bolt | 3 |
| 15***38 | Bolt | 4 |
339-3014 Kit-Front Gear
| 15***48 | Cover | 1 |
| 15***49 | Spring | 1 |
| 15***50 | Collar | 1 |
154-1877 Lifting Gp-Engine
| 15***75 | Bolt | 2 |
| 15***77 | Lifting Group-Engine | 1 |
| 19***73 | Plate; (Front) | 1 |
251-7618 Lifting Gp-Engine
| 15***84 | Washer | 2 |
| 16***41 | Bolt | 2 |
| 25***15 | Plate-Lifting | 2 |
241-5789 Mounting Gp-Engine -Hardware
| 16***95 | Washer; (16.5x71.5x3-mm Thk) | 6 |
| 21***61 | Mount As | 3 |
| 24***89 | Mounting Group-Engine; -Hardware | 1 |
228-1764 Mounting Gp-Engine -Supports
| 14***53 | Bolt; (M14x1.5x30-mm) | 8 |
| 20***85 | Bracket As | 1 |
| 22***64 | Mounting Group-Engine; -Supports | 1 |
154-2435 Mounting Gp-Fan
| 15***40 | Bolt | 4 |
| 15***33 | Plate | 1 |
| 15***35 | Mounting Group-Fan | 1 |
217-7748 Mounting Gp-Starting Motor
| 06***66 | Washer | 4 |
| 13***64 | Stud | 2 |
| 15***75 | Bolt | 5 |
217-7360 Pan Gp-Oil
| 14***61 | Valve-Drain; (Engine Oil Sump) | 1 |
| 15***33 | Seal; (Engine Oil Filler Cap) | 1 |
| 15***36 | Washer | 2 |
246-3481 Pan Gp-Oil
| 14***61 | Valve-Drain; (Engine Oil Sump) | 1 |
| 15***33 | Seal; (Engine Oil Filler Cap) | 1 |
| 15***36 | Washer | 2 |
217-1480 Piston & Rod Gp
| 14***08 | Kit-Bearing; (Rod) | 1 |
| 15***67 | Rod As-Connecting | 4 |
| 15***69 | Bushing | 1 |
270-6930 Piston & Rod Gp
| 14***08 | Kit-Bearing; (Rod) | 4 |
| 15***67 | Rod As-Connecting | 4 |
| 15***69 | Bushing | 1 |
236-5125 Piston & Rod Gp
| 14***08 | Kit-Bearing; (Rod) | 1 |
| 15***67 | Rod As-Connecting | 4 |
| 15***69 | Bushing | 1 |
217-2777 Pulley Gp-Crankshaft
| 15***92 | Nut | 4 |
| 15***92 | Key-Woodruff | 1 |
| 15***94 | Gasket | 1 |
217-7832 Pulley Gp-Water Pump
| 15***22 | Pulley-Water Pump | 1 |
| 21***32 | Pulley Group-Water Pump | 1 |
251-6791 Pulley Gp-Water Pump
| 15***22 | Pulley-Water Pump | 1 |
| 25***89 | V-Belt; (Water Pump) | 1 |
| 25***91 | Pulley Group-Water Pump | 1 |
236-5156 Valve Mechanism Gp
| 15***87 | Screw-Adjustment | 8 |
| 15***90 | Nut | 8 |
| 15***35 | Seal-O-Ring | 1 |
217-2753 Valve Mechanism Gp
| 15***87 | Screw-Adjustment | 8 |
| 15***90 | Nut | 8 |
| 15***61 | Bolt | 2 |
293-2167 Valve Mechanism Gp
| 15***87 | Screw-Adjustment | 8 |
| 15***90 | Nut | 8 |
| 15***35 | Seal-O-Ring | 1 |
Cooling System
246-3472 Cooler Gp-Fltr Base & Eng Oil
| 12***81 | Clip | 1 |
| 15***84 | Washer | 1 |
| 16***26 | Clamp-Hose | 4 |
218-0934 Mounting Gp-Rad & Oil Cooler
| 14***12 | Support As | 1 |
| 14***32 | Pin As | 1 |
| 16***47 | Latch As | 1 |
228-1762 Mounting Gp-Rad & Oil Cooler
| 14***12 | Support As | 1 |
| 14***32 | Pin As | 1 |
| 16***47 | Latch As | 1 |
246-3451 Pump Gp-Water
| 15***60 | Nut | 5 |
| 15***61 | Bolt | 4 |
| 15***75 | Bolt | 1 |
154-1816 Pump Gp-Water
| 15***16 | Pump Group-Water | 1 |
| 15***17 | Plug | 1 |
| 15***18 | Plate | 1 |
217-7384 Pump Gp-Water
| 12***64 | Clamp-Hose; (.76mm Id) | 1 |
| 15***60 | Nut | 5 |
| 15***61 | Bolt | 4 |
261-6119 Radiator & Hyd Oil Cooler Gp
| 03***65 | Cap As-Radiator; (Sea Water Heat Exchanger) | 1 |
| 06***80 | Fitting | 1 |
| 20***27 | Fan As | 1 |
236-5375 Radiator & Hyd Oil Cooler Gp
| 03***65 | Cap As-Radiator; (Sea Water Heat Exchanger) | 1 |
| 06***80 | Fitting | 1 |
| 20***27 | Fan As | 1 |
228-3359 Radiator & Hyd Oil Cooler Gp
| 03***65 | Cap As-Radiator; (Sea Water Heat Exchanger) | 1 |
| 06***80 | Fitting | 1 |
| 20***27 | Fan As | 1 |
228-1783 Radiator & Oil Cooler Mtg Gp
| 12***64 | Clamp-Hose; (.76mm Id) | 1 |
| 14***35 | Clip-2 Piece | 1 |
| 14***36 | Clip-2 Piece | 1 |
218-0925 Radiator & Oil Cooler Mtg Gp
| 12***64 | Clamp-Hose; (.76mm Id) | 1 |
| 14***35 | Clip-2 Piece | 1 |
| 14***36 | Clip-2 Piece | 1 |
261-6118 Radiator & Oil Cooler Mtg Gp
| 12***64 | Clamp-Hose; (.76mm Id) | 1 |
| 14***35 | Clip-2 Piece | 1 |
| 14***36 | Clip-2 Piece | 1 |
Electrical And Starting System
3e-7584 Lamp Gp-Head & Signal -Rh
| 08***48 | Lamp; (12-Volt, 5-Watt) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 16***95 | Lens | 1 |
246-4319 Alternator Gp-Charging
| 12***59 | Pump Group-Fuel Priming | 1 |
| 12***62 | Bladder | 1 |
| 14***62 | Filter Group-Water Sep & Fuel | 1 |
247-9912 Alternator Gp-Charging
| 10***51 | Bolt; (M8x1.25x130-mm) | 1 |
| 15***84 | Washer | 2 |
| 15***50 | Cable; (00-Ga, Black)(183-cm Each) | 0 |
225-7950 Battery Gp -Standard
| 10***51 | Bolt; (M8x1.25x130-mm) | 1 |
| 15***75 | Bolt | 5 |
| 15***84 | Washer | 2 |
225-7952 Battery Gp -Heavy-Duty
| 15***56 | Battery; (12-Volt, Maintenance Free)(24 V) | 1 |
| 19***29 | Clamp | 1 |
| 22***52 | Battery Group; -Heavy-Duty | 1 |
272-9497 Connection Gp-Electrical
| 19***61 | Cable As-Adapter; (Fuel Shutoff Solenoid) | 3 |
| 27***97 | Connection Group-Electrical | 1 |
217-2778 Connection Gp-Electrical
| 19***29 | Clamp | 1 |
| 21***78 | Connection Group-Electrical | 1 |
| 23***68 | Battery | 1 |
217-5884 Connection Gp-Electrical
| 18***37 | Connector As | 1 |
| 20***76 | Connection | 1 |
| 21***84 | Connection Group-Electrical | 1 |
154-4233 Control Gp-Interlock
| 15***33 | Control Group-Interlock | 1 |
| 27***96 | Connector | 3 |
233-5670 Conversion Ar-Non-Roading -Nacd
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
| 23***70 | Conversion Ar-Non-Roading; -Nacd | 1 |
216-4755 Cover Gp-Fuse Panel
| 10***43 | Seal; (32-cm Each) | 0 |
| 11***71 | Puller-Minifuse | 1 |
| 16***65 | Retainer | 2 |
225-8000 Electronics Gp-Implement -Work Tool
| 10***43 | Seal; (32-cm Each) | 0 |
| 11***71 | Puller-Minifuse | 1 |
| 16***65 | Retainer | 2 |
207-5262 Electronics Gp-Machine -Security
| 12***97 | Screw-Pan Head; (No 8-32x0.375-In) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 20***62 | Electronics Group-Machine | 1 |
216-4750 Fastener Gp-Wiring Harness
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 15***55 | Control Group-Unprogrammed; -Machine Security System | 1 |
| 18***72 | Screw-Pan Head; (No 8-32x9.52-mm)(Wax Coated) | 1 |
192-0104 Glow Plug Gp
| 15***35 | Support-Plug | 1 |
| 15***76 | Nut | 1 |
| 15***77 | Washer | 1 |
154-1933 Glow Plug Gp
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 4 |
| 15***33 | Glow Plug Group | 1 |
| 19***36 | Insert-Threaded; (M6x1-Thd) | 4 |
172-4446 Heater Gp-Jacket Water
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
154-3927 Heater Gp-Jacket Water
| 15***27 | Heater Group-Jacket Water | 1 |
| 15***76 | Nut | 1 |
| 15***77 | Washer | 1 |
154-3928 Heater Gp-Jacket Water
| 13***17 | Cap As-Dust | 1 |
| 14***99 | Element As-Jacket Water Heater | 1 |
| 15***27 | Heater Group-Jacket Water | 1 |
172-4445 Heater Gp-Jacket Water
| 12***09 | Cord As-Heater Element; -240-Volt | 1 |
| 13***17 | Cap As-Dust | 1 |
| 15***94 | Element As-Jacket Water Heater | 11 |
239-5010 Installation Gp-Security -Kit
| 09***33 | Screw-Machine; (M4x0.7x40-mm) | 2 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
225-7991 Installation Gp-Security -Machine Security System
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
233-5706 Kit-Work Tool Control & Wiring -Radial Lift
| 09***33 | Screw-Machine; (M4x0.7x40-mm) | 2 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
233-5638 Kit-Work Tool Control & Wiring -Vertical Lift
| 09***33 | Screw-Machine; (M4x0.7x40-mm) | 2 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
218-6742 Kit-Work Tool Wiring -Vertical Lift
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 20***14 | Lens As; (Floodlight) | 1 |
| 21***42 | Kit-Work Tool Wiring; -Vertical Lift | 1 |
218-6741 Kit-Work Tool Wiring -Radial Lift
| 09***33 | Screw-Machine; (M4x0.7x40-mm) | 2 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***60 | Strap | 1 |
234-4328 Lamp Gp-Flood -Front
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 20***11 | Lens As | 1 |
| 23***28 | Lamp Group-Flood; -Front, Rear, Wide Range | 1 |
234-7727 Lamp Gp-Flood -Rear
| 10***46 | Lamp; (12-Volt, 4-Watt)(Miniature) | 1 |
| 10***47 | Body As-Lamp | 1 |
| 10***48 | Lens As; (Headlight)(High, Low Beam) | 1 |
340-7721 Lamp Gp-Stop & Tail -Rear Door
| 34***21 | Lamp Group-Stop & Tail; -Rear Door | 1 |
| 9R***42 | Plug As | 1 |
| 9R***58 | Cord As | 1 |
142-7503 Lamp Gp-Stop & Tail
| 08***48 | Lamp; (12-Volt, 5-Watt) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 14***03 | Lamp Group-Stop & Tail; -12-Volt | 1 |
142-8634 Lamp Gp-Stop & Tail
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***34 | Lamp Group-Stop & Tail; -Stop, Tail | 3 |
| 14***31 | Switch As-Rocker; (Hazard Warning Lights) | 1 |
128-6985 Lamp Gp-Warning Beacon -Amber, Magnetic Mount, Rotating
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 27***00 | Lens; (Amber)(Warning Beacon) | 1 |
| 9R***42 | Plug As | 1 |
309-1325 Lamp Gp-Warning Beacon -Amber
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***26 | Switch As-Rocker; (Rear Working Lamp) | 1 |
| 19***37 | Insert-Threaded; (M8x1.25-Thd) | 2 |
216-4746 Lighting Gp-Flood -Rear
| 21***46 | Lighting Group-Flood; -Rear | 1 |
| 23***28 | Lamp Group-Flood; -Front, Rear, Wide Range | 2 |
| 5P***39 | Grommet | 2 |
218-6425 Lighting Gp-Flood -Front
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
216-4715 Lighting Gp-Roading
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
216-4716 Lighting Gp-Roading
| 14***03 | Lamp Group-Stop & Tail; -12-Volt | 2 |
| 21***16 | Lighting Group-Roading | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 2 |
142-8652 Lighting Gp-Stop & Tail
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 14***52 | Lighting Group-Stop & Tail | 1 |
142-8653 Lighting Gp-Warning Beacon
| 14***53 | Lighting Group-Warning Beacon; -12-Volt | 1 |
| 15***36 | Washer | 2 |
| 18***65 | Plug | 1 |
263-3256 Sensor Gp-Temp & Press
| 24***70 | Bushing | 1 |
| 24***71 | Solenoid; (Starting Motor) | 1 |
| 24***73 | Bushing | 1 |
217-5795 Sensor Gp-Temp & Press
| 15***36 | Washer | 2 |
| 21***92 | Adapter | 1 |
| 21***93 | Switch-Temperature; (Engine Coolant) | 1 |
339-2900 Starting Motor Gp-Electric
| 15***36 | Washer | 2 |
| 29***65 | Switch-Pressure; (Engine Oil) | 1 |
| 30***22 | Adapter | 1 |
307-8201 Starting Motor Gp-Electric
| 14***83 | Bolt; (M10x1.5x45-mm)(Starter Motor) | 2 |
| 30***01 | Nut, Hex, Tappet Top Stop Lock Nut, Starting Motor Group-Electric | 1 |
| 33***03 | Kit-Terminal | 1 |
163-3361 Starting Motor Gp-Electric
| 15***99 | Washer | 2 |
| 15***03 | Washer | 2 |
| 16***61 | Starting Motor Group-Electric | 2 |
333-5930 Starting Motor Gp-Electric
| 14***83 | Bolt; (M10x1.5x45-mm)(Starter Motor) | 2 |
| 33***30 | Starting Motor Group-Electric; -12-Volt | 1 |
| 33***03 | Kit-Terminal | 1 |
247-0323 Switch Gp-Press & Temp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 24***23 | Switch Group-Press & Temp; (Engine Coolant, Engine Oil) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
184-1564 Switch Gp-Pressure -Brake Light
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***39 | Alarm As | 1 |
| 18***64 | Switch Group-Pressure; -Brake Light | 1 |
225-7969 Warning Gp-Backup
| 10***74 | Seal-Connector | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
225-7948 Wiring Gp-Air Conditioner
| 09***34 | Spacer; (9x20x10-mm Thk) | 3 |
| 09***33 | Screw-Machine; (M4x0.7x40-mm) | 2 |
| 10***20 | Plug As-Connector; (2-Pin) | 1 |
225-8001 Wiring Gp-Chassis
| 09***34 | Spacer; (9x20x10-mm Thk) | 3 |
| 10***20 | Plug As-Connector; (2-Pin) | 3 |
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 4 |
225-8010 Wiring Gp-Engine
| 09***34 | Spacer; (9x20x10-mm Thk) | 3 |
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 4 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
230-3743 Wiring Gp-Horn -With Mounting
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
272-1625 Wiring Gp-Machine -Demand Fan
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
225-7964 Wiring Gp-Rear Lighting
| 09***33 | Screw-Machine; (M4x0.7x40-mm) | 2 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***60 | Strap | 1 |
216-4724 Wiring Gp-Work Tool -Vertical Lift
| 09***33 | Screw-Machine; (M4x0.7x40-mm) | 2 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
225-7960 Wiring Gp-Work Tool -Radial Lift
| 14***23 | Housing-Axle | 1 |
| 14***24 | Spindle-Wheel | 1 |
| 14***29 | Spacer; (50.8x63.5x32-mm Thk) | 1 |
Engine Arrangement
218-6750 Engine Ar
| 21***50 | Engine Ar | 1 |
| 23***48 | Engine Ar-Primary | 1 |
218-6550 Engine Ar
| 17***08 | Engine Ar-Primary | 1 |
| 21***50 | Engine Ar | 1 |
179-1808 Engine Ar-Primary
| 15***77 | Lifting Group-Engine | 1 |
| 15***33 | Glow Plug Group | 1 |
| 15***35 | Mounting Group-Fan | 1 |
233-6648 Engine Ar-Primary
| 15***35 | Mounting Group-Fan | 1 |
| 17***11 | Pump & Mtg Group-Fuel Transfer | 1 |
| 19***04 | Glow Plug Group | 1 |
278-1228 Installation Ar-Engine
| 22***10 | Wiring Group-Engine | 1 |
| 22***62 | Mounting Group-Rad & Oil Cooler | 1 |
| 22***63 | Mounting Group-Pump | 1 |
278-1218 Installation Ar-Engine
| 21***25 | Radiator & Oil Cooler Mtg Group | 1 |
| 21***34 | Mounting Group-Rad & Oil Cooler | 1 |
| 21***44 | Lines Group-Air | 1 |
218-0911 Installation Ar-Engine
| 21***11 | Installation Ar-Engine | 1 |
| 22***10 | Wiring Group-Engine | 1 |
| 22***62 | Mounting Group-Rad & Oil Cooler | 1 |
228-1767 Installation Ar-Engine
| 21***25 | Radiator & Oil Cooler Mtg Group | 1 |
| 21***34 | Mounting Group-Rad & Oil Cooler | 1 |
| 21***37 | Muffler & Mounting Group | 1 |
Frame And Body
218-5650 Bumper Gp -Rear
| 14***21 | Stud | 2 |
| 15***06 | Boss | 2 |
| 21***50 | Bumper Group; -Rear | 1 |
218-5772 Bumper Gp -Rear
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 21***46 | Box Group-Storage | 1 |
| 21***01 | Floor Mat | 1 |
233-5685 Conversion Ar-Roading -Germany
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 18***47 | Lifting Group-Machine; -4-Point | 1 |
233-5686 Conversion Ar-Roading -Italy
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 21***15 | Lighting Group-Roading | 1 |
257-5727 Conversion Ar-Roading -Italy
| 11***34 | Film-Warning; (Steering) | 1 |
| 16***62 | Plate As | 1 |
| 16***69 | Visor Group-Cab | 1 |
233-5684 Conversion Ar-Roading -United Kingdom
| 17***22 | Visor Group-Cab | 1 |
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
233-5672 Conversion Ar-Roading -Germany
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 21***15 | Lighting Group-Roading | 1 |
257-5721 Conversion Ar-Roading -Germany, Italy
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 18***47 | Lifting Group-Machine; -4-Point | 1 |
257-5717 Conversion Ar-Roading -Germany, Italy
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 21***46 | Box Group-Storage | 1 |
| 21***01 | Floor Mat | 1 |
257-5728 Conversion Ar-Roading -Germany, High Flow
| 11***34 | Film-Warning; (Steering) | 1 |
| 15***42 | Plate-Information; (Maximum Weight) | 1 |
| 16***89 | Tack-Fastener | 4 |
233-5675 Conversion Ar-Roading -Germany
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 21***15 | Lighting Group-Roading | 1 |
233-5683 Conversion Ar-Roading -Italy
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 18***47 | Lifting Group-Machine; -4-Point | 1 |
| 19***84 | Film Group; -Clearance | 1 |
233-5674 Conversion Ar-Roading -Outside Nacd
| 17***22 | Visor Group-Cab | 1 |
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
233-5673 Conversion Ar-Roading -Italy
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 19***84 | Film Group; -Clearance | 1 |
| 21***46 | Box Group-Storage | 1 |
257-5726 Conversion Ar-Roading -Germany
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
257-5716 Conversion Ar-Roading -Germany, Italy
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 21***15 | Lighting Group-Roading | 1 |
233-5676 Conversion Ar-Roading -Italy
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 18***47 | Lifting Group-Machine; -4-Point | 1 |
| 21***46 | Box Group-Storage | 1 |
233-5682 Conversion Ar-Roading -Germany
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 18***47 | Lifting Group-Machine; -4-Point | 1 |
233-5681 Conversion Ar-Roading -Outside Nacd
| 17***22 | Visor Group-Cab | 1 |
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
257-5718 Conversion Ar-Roading -United Kingdom, Cosa
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 18***47 | Lifting Group-Machine; -4-Point | 1 |
257-5722 Conversion Ar-Roading -Germany, Italy
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 18***47 | Lifting Group-Machine; -4-Point | 1 |
| 21***46 | Box Group-Storage | 1 |
233-5671 Conversion Ar-Roading -Outside Nacd
| 17***22 | Visor Group-Cab | 1 |
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
257-5723 Conversion Ar-Roading -European
| 11***34 | Film-Warning; (Steering) | 1 |
| 16***62 | Plate As | 1 |
| 16***69 | Visor Group-Cab | 1 |
234-0793 Conversion Gp-Roading -Italy
| 11***34 | Film-Warning; (Steering) | 1 |
| 17***15 | Bracket As | 1 |
| 17***16 | Chock | 1 |
278-1292 Conversion Gp-Roading -Germany
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 12***54 | Fastener; (Loop) (22cm) (X3) | 0 |
| 12***55 | Fastener-Hook; (18-cm Each) | 0 |
278-1293 Conversion Gp-Roading -Italy
| 17***80 | Block | 10 |
| 27***93 | Conversion Group-Roading; -Italy | 1 |
| 7X***90 | Washer-Hard; (13.5x44.5x6-mm Thk) | 2 |
234-0792 Conversion Gp-Roading -Germany
| 12***85 | Lamp Group-Warning Beacon; -Amber, Magnetic Mount, Rotating | 1 |
| 12***54 | Fastener; (Loop) (22cm) (X3) | 0 |
| 12***55 | Fastener-Hook; (18-cm Each) | 0 |
191-9566 Counterweight Gp -Kit
| 19***66 | Counterweight Group; -Kit | 1 |
| 21***27 | Plate | 4 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 12 |
142-8830 Counterweight Gp
| 14***30 | Counterweight Group | 1 |
| 18***23 | Block; (Lh)(Counterweight)(33.70 Kg) | 1 |
| 18***24 | Block; (Rh)(Counterweight)(33.70 Kg) | 1 |
183-7122 Counterweight Gp
| 18***22 | Counterweight Group | 1 |
| 18***23 | Block; (Lh)(Counterweight)(33.70 Kg) | 1 |
| 18***24 | Block; (Rh)(Counterweight)(33.70 Kg) | 1 |
185-9940 Counterweight Gp -Kit
| 18***40 | Counterweight Group; -Kit | 1 |
| 21***27 | Plate | 4 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 12 |
215-3926 Counterweight Gp
| 11***85 | Bumper | 2 |
| 13***40 | Locknut; (M8x1.25-Thd) | 3 |
| 14***01 | Hood As | 1 |
218-5803 Enclosure Gp-Engine
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***05 | Bearing-Sleeve | 8 |
| 14***10 | Plate As | 1 |
218-6875 Frame & Mtg Gp-Machine
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***05 | Bearing-Sleeve | 4 |
| 14***10 | Plate As | 1 |
218-6975 Frame & Mtg Gp-Machine
| 21***75 | Frame & Mtg Group-Machine | 1 |
| 22***15 | Plate As | 1 |
| 24***77 | Bolt; (M8x1.25x12-mm) | 1 |
156-9809 Guide Gp-Lines -Auxiliary Hydraulic
| 15***09 | Guide Group-Lines; -Auxiliary Hydraulic | 1 |
| 16***00 | Film-Warning; (Clearance) | 1 |
277-0651 Kit-Roading Conversion -Lights, Mirrors
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
277-0653 Kit-Roading Conversion -Lights, Mirrors
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
340-7726 Kit-Roading Conversion -Germany, Lights, Mirrors
| 14***26 | Plate-Lift | 4 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 8 |
| 34***26 | Kit-Roading Conversion; -Germany, Lights, Mirrors | 1 |
340-7722 Kit-Roading Conversion -Italy, Lights, Switches
| 11***34 | Film-Warning; (Steering) | 1 |
| 11***58 | Film-Identification; (20-Km/H) | 3 |
| 16***62 | Plate As | 1 |
277-0652 Kit-Roading Conversion -Lights, Mirrors
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
340-7724 Kit-Roading Conversion -Germany
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
257-5730 Kit-Roading Conversion -Outside Nacd
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
277-0650 Kit-Roading Conversion -Lights, Mirrors
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
340-7725 Kit-Roading Conversion -Italy, Lights, Mirrors
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
218-5969 Lifting Gp-Machine -Single Point
| 14***26 | Plate-Lift | 4 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 8 |
| 21***69 | Lifting Group-Machine; -Single Point | 1 |
218-6708 Lifting Gp-Machine
| 09***25 | Pin-Clevis | 1 |
| 15***54 | Bracket As-Lift | 1 |
| 15***56 | Plate | 4 |
188-0147 Lifting Gp-Machine -4-Point
| 09***25 | Pin-Clevis | 1 |
| 15***54 | Bracket As-Lift | 1 |
| 15***56 | Plate | 4 |
218-6709 Lifting Gp-Machine
| 13***66 | Mirror Group-Rear View | 2 |
| 14***71 | Clamp; (Top)(Top) | 1 |
| 14***72 | Clamp; (Bottom)(Bottom) | 1 |
238-7672 Mirror & Mtg Gp-Rear View -With Roading Light Mount
| 17***36 | Plate | 1 |
| 19***62 | Lamp Group-Registration Plate | 1 |
| 20***65 | Plate | 1 |
238-7671 Mirror & Mtg Gp-Rear View -With Roading Light Mount
| 13***66 | Mirror Group-Rear View | 2 |
| 14***71 | Clamp; (Top)(Top) | 1 |
| 14***72 | Clamp; (Bottom)(Bottom) | 1 |
173-3021 Mounting Gp-Registration -With Wiring & Lights
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 4 |
225-7963 Mounting Gp-Registration
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 4 |
| 15***71 | Kit-Connecting Plug; (4-Pin) | 1 |
175-4228 Mounting Gp-Roading Lights -Rear
| 17***28 | Mounting Group-Roading Lights; -Rear | 1 |
| 17***79 | Insulation | 2 |
| 23***88 | Insulation | 1 |
233-5616 Suppression Gp-Sound
| 14***86 | Accumulator Group-Hydraulic; -Charged | 1 |
| 19***31 | Elbow; (45-Deg) | 1 |
| 19***32 | Elbow As | 1 |
Fuel System
218-5566 Cable Gp-Governor Control
| 06***58 | Clamp-Hose | 2 |
| 15***53 | Seal-O-Ring | 1 |
| 15***84 | Washer | 2 |
218-5602 Control Gp-Governor
| 21***02 | Control Group-Governor | 1 |
| 25***77 | Pin As-Spring | 1 |
| 28***70 | End-Yoke Rod | 1 |
144-9962 Filter Gp-Water Sep & Fuel
| 14***62 | Filter Group-Water Sep & Fuel | 1 |
| 21***65 | Pedal Group-Governor; -Includes Lever | 1 |
| 23***96 | Screw-Flat Head; (M6x1x35-mm) | 4 |
231-5129 Governor Gp
| 11***01 | Bowl As-Water Collection | 1 |
| 11***18 | Ring-Retaining | 1 |
| 11***19 | Nut | 1 |
246-3415 Governor Gp
| 13***11 | Cap; (Tamper Resistant) | 1 |
| 15***60 | Nut | 1 |
| 15***83 | Pin | 1 |
218-0933 Lines Gp-Fuel Prm & Filter
| 13***11 | Cap; (Tamper Resistant) | 1 |
| 15***60 | Nut | 1 |
| 15***83 | Pin | 1 |
228-1781 Lines Gp-Fuel Prm & Filter
| 14***28 | Elbow | 1 |
| 17***54 | Pump Group-Fuel Prm & Prim Filter; -Water Separator | 1 |
| 18***07 | Clamp-Hose | 1 |
176-7711 Pump & Mtg Gp-Fuel Transfer
| 14***28 | Cap As-Filler; (Fuel) | 1 |
| 14***28 | Elbow | 1 |
| 17***11 | Pump & Mtg Group-Fuel Transfer | 1 |
271-2120 Pump Gp-Fuel Injection
| 15***92 | Nut | 3 |
| 15***60 | Nut | 3 |
| 15***12 | Washer | 1 |
217-2764 Pump Gp-Fuel Injection
| 15***73 | Bolt | 2 |
| 17***12 | Pump Group-Fuel Transfer | 1 |
| 17***19 | Seal-O-Ring | 1 |
302-7821 Pump Gp-Fuel Injection
| 10***79 | Bolt; (M8x1.25x20-mm) | 2 |
| 15***92 | Nut | 3 |
| 15***60 | Nut | 3 |
295-8181 Pump Gp-Fuel Injection
| 10***79 | Bolt; (M8x1.25x20-mm) | 2 |
| 15***92 | Nut | 3 |
| 15***60 | Nut | 3 |
176-9954 Pump Gp-Fuel Prm & Prim Filter -Water Separator
| 17***54 | Pump Group-Fuel Prm & Prim Filter; -Water Separator | 1 |
| 20***26 | Bolt-Special; (Banjo) | 1 |
| 20***27 | Washer | 2 |
Hydraulic System
193-0447 Accumulator & Mtg Gp-Hydraulic -Work Tool
| 19***47 | Accumulator & Mtg Group-Hydraulic; -Work Tool | 1 |
149-0686 Accumulator Gp-Hydraulic -Charged
| 14***86 | Accumulator Group-Hydraulic; -Charged | 1 |
227-8807 Accumulator Gp-Hydraulic -Uncharged
| 17***02 | Adapter Assem. | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
| 22***07 | Accumulator Group-Hydraulic; -Uncharged | 1 |
179-7001 Adapter Gp-Oil Line -Pilot Oil Lines
| 06***43 | Ring-Snap | 1 |
| 17***01 | Adapter Group-Oil Line; -Unit Injector Pump | 1 |
| 21***55 | Pin As | 1 |
231-5274 Cylinder & Mtg Gp-Angle Blade
| 14***89 | Support-Loader | 1 |
| 14***90 | Pin As | 4 |
| 14***91 | Pin As | 2 |
230-5406 Cylinder & Mtg Gp-Angle Blade
| 23***04 | Cylinder Group-Hydraulic; (Angle) | 2 |
| 23***05 | Cylinder Group-Hydraulic; (Tilt) | 1 |
| 23***06 | Cylinder & Mtg Group-Angle Blade | 1 |
218-6799 Cylinder & Mtg Gp-Lift Arm
| 11***94 | Washer; (41x64x1-mm Thk) | 10 |
| 14***91 | Pin As | 2 |
| 14***93 | Pin | 2 |
218-6899 Cylinder & Mtg Gp-Lift Arm
| 16***13 | Kit-Seal | 1 |
| 21***99 | Cylinder & Mtg Group-Lift Arm | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
293-6264 Cylinder Gp-Bucket
| 16***13 | Kit-Seal | 1 |
| 29***64 | Cylinder Group-Bucket | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
154-5018 Cylinder Gp-Bucket
| 15***18 | Cylinder Group-Bucket | 1 |
| 26***41 | Kit-Seal | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
164-9295 Cylinder Gp-Grapple
| 16***95 | Cylinder Group-Grapple | 1 |
| 25***97 | Bearing-Sleeve | 1 |
| 25***42 | Bearing-Sleeve | 1 |
278-1975 Cylinder Gp-Grapple -Industrial
| 27***75 | Cylinder Group-Grapple; -Industrial | 1 |
156-5512 Cylinder Gp-Grapple
| 15***12 | Cylinder Group-Grapple | 1 |
| 17***85 | Kit-Seal | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
192-2640 Cylinder Gp-Hydraulic -Coupler
| 17***58 | Kit-Seal | 1 |
| 19***40 | Cylinder Group-Hydraulic; -Coupler | 1 |
| 21***55 | Rod End As | 1 |
225-9521 Cylinder Gp-Hydraulic -Angle Blade
| 02***87 | Fitting-Grease; (Universal Joint) | 2 |
| 22***21 | Cylinder Group-Hydraulic; -Angle Blade | 1 |
| 26***40 | Kit-Seal; (Swing Cylinder) | 1 |
274-9930 Cylinder Gp-Hydraulic -Angle Blade
| 02***87 | Fitting-Grease; (Universal Joint) | 2 |
| 26***40 | Kit-Seal; (Swing Cylinder) | 1 |
| 27***30 | Cylinder Group-Hydraulic; -Angle Blade | 1 |
278-1969 Cylinder Gp-Hydraulic
| 21***26 | Kit-Seal; (Lift Cylinder) | 1 |
| 27***69 | Cylinder Group-Hydraulic | 1 |
274-9931 Cylinder Gp-Hydraulic -Angle Blade
| 25***97 | Bearing-Sleeve | 1 |
| 27***31 | Cylinder Group-Hydraulic; -Angle Blade | 1 |
| 27***70 | Kit-Seal; (Hydraulic Cylinder) | 1 |
230-3703 Cylinder Gp-Lift
| 21***25 | Kit-Seal | 1 |
| 23***03 | Cylinder Group-Lift | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
230-3683 Cylinder Gp-Lift -Lh
| 21***26 | Kit-Seal; (Lift Cylinder) | 1 |
| 23***83 | Cylinder Group-Lift; -Lh | 1 |
230-3693 Cylinder Gp-Lift -Rh
| 21***27 | Kit-Seal | 1 |
| 23***93 | Cylinder Group-Lift; -Rh | 1 |
230-3694 Cylinder Gp-Tilt -Rh
| 23***94 | Cylinder Group-Tilt; -Rh | 1 |
| 2S***78 | Seal-O-Ring (Id=37.47mm) | 1 |
230-3684 Cylinder Gp-Tilt -Lh
| 21***25 | Kit-Seal | 1 |
| 23***84 | Cylinder Group-Tilt; -Lh | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
9u-6995 Fitting Gp-Hydraulic
| 21***43 | Fitting As; (Quick Disconnect, Male) | 1 |
| 21***44 | Fitting As; (Quick Disconnect, Male) | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 2 |
218-5841 Fitting Gp-Hydraulic -Quick Disconnect, Female, High Flow
| 19***47 | Accumulator & Mtg Group-Hydraulic; -Work Tool | 1 |
| 21***41 | Fitting Group-Hydraulic; -Quick Disconnect, Female, High Flow | 1 |
| 21***78 | Lines Group-Pilot; -Direction, Speed | 1 |
218-5840 Fitting Gp-Hydraulic -Quick Disconnect, Male, High Flow
| 21***40 | Fitting Group-Hydraulic; -Quick Disconnect, Male, High Flow | 1 |
| 21***45 | Fitting As; (Quick Disconnect, Female) | 1 |
| 21***46 | Fitting As; (Quick Disconnect, Female) | 1 |
278-1217 Hydraulic Ar
| 19***47 | Accumulator & Mtg Group-Hydraulic; -Work Tool | 1 |
| 21***78 | Lines Group-Pilot; -Direction, Speed | 1 |
| 21***89 | Lines Group-Hydrostatic | 1 |
278-1243 Hydraulic Ar
| 09***07 | Nut; (M12x1.75-Thd) | 1 |
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 4 |
| 10***29 | Stud; (M10x1.5-Thd) | 2 |
261-6132 Hydraulic Ar -Sound Suppression
| 21***12 | Manifold & Mtg Group-Control | 1 |
| 21***53 | Lines Group-Work Tool; -High Flow | 1 |
| 21***33 | Lines Group-Pump; -High Flow | 1 |
261-6149 Hydraulic Ar -High Flow, Sound Suppression
| 19***47 | Accumulator & Mtg Group-Hydraulic; -Work Tool | 1 |
| 21***78 | Lines Group-Pilot; -Direction, Speed | 1 |
| 21***89 | Lines Group-Hydrostatic | 1 |
278-1227 Hydraulic Ar
| 19***47 | Accumulator & Mtg Group-Hydraulic; -Work Tool | 1 |
| 21***01 | Lines Group-Pump | 1 |
| 21***11 | Lines Group-Work Tool; -Standard Flow | 1 |
218-6920 Hydraulic Ar
| 21***32 | Lines Group-Pump | 1 |
| 21***97 | Lines Group-Work Tool | 1 |
| 21***20 | Hydraulic Ar | 1 |
218-6130 Hydraulic Ar
| 21***12 | Manifold & Mtg Group-Control | 1 |
| 21***53 | Lines Group-Work Tool; -High Flow | 1 |
| 21***79 | Pump & Mtg Group-Work Tool; -High Flow | 1 |
218-6180 Hydraulic Ar
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***16 | Switch Group-Rocker; -Work Tool Positioner | 1 |
| 15***53 | Manifold & Mtg Group-Control; -Work Tool Positioner | 1 |
218-6640 Hydraulic Ar
| 21***01 | Lines Group-Pump | 1 |
| 21***75 | Pump & Mtg Group-Work Tool; -Standard Flow | 1 |
| 21***11 | Lines Group-Work Tool; -Standard Flow | 1 |
218-6181 Hydraulic Ar
| 21***81 | Hydraulic Ar | 1 |
| 21***04 | Lines Group-Lift Cylinder | 1 |
| 21***07 | Lines Group-Tilt Cylinder | 1 |
218-5709 Hydraulic Ar
| 19***47 | Accumulator & Mtg Group-Hydraulic; -Work Tool | 1 |
| 21***09 | Hydraulic Ar | 1 |
| 21***78 | Lines Group-Pilot; -Direction, Speed | 1 |
261-6139 Hydraulic Ar -High Flow, Sound Suppression
| 21***01 | Lines Group-Pump | 1 |
| 21***11 | Lines Group-Work Tool; -Standard Flow | 1 |
| 26***94 | Pump & Mtg Group-Work Tool | 1 |
218-6760 Hydraulic Ar
| 21***12 | Manifold & Mtg Group-Control | 1 |
| 21***03 | Lines Group-Pump | 1 |
| 21***79 | Pump & Mtg Group-Work Tool; -High Flow | 1 |
261-6142 Hydraulic Ar -Sound Suppression
| 21***12 | Manifold & Mtg Group-Control | 1 |
| 21***03 | Lines Group-Pump | 1 |
| 21***12 | Lines Group-Work Tool; -High Flow | 1 |
218-5620 Hydraulic Ar
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 14***16 | Switch Group-Rocker; -Work Tool Positioner | 1 |
| 19***52 | Manifold & Mtg Group-Control | 1 |
218-6131 Hydraulic Ar
| 21***19 | Lines Group-Tilt Cylinder; -Without Work Tool Positioner | 1 |
| 21***31 | Hydraulic Ar | 1 |
| 21***07 | Lines Group-Lift Cylinder | 1 |
218-6762 Hydraulic Ar
| 19***47 | Accumulator & Mtg Group-Hydraulic; -Work Tool | 1 |
| 21***01 | Lines Group-Pump | 1 |
| 21***75 | Pump & Mtg Group-Work Tool; -Standard Flow | 1 |
218-5820 Hydraulic Ar
| 21***20 | Hydraulic Ar | 1 |
| 21***32 | Lines Group-Pump | 1 |
| 21***75 | Pump & Mtg Group-Work Tool; -Standard Flow | 1 |
278-1233 Hydraulic Ar
| 19***47 | Accumulator & Mtg Group-Hydraulic; -Work Tool | 1 |
| 21***03 | Lines Group-Pilot | 1 |
| 21***06 | Lines Group-Hydrostatic | 1 |
218-6820 Hydraulic Ar
| 19***47 | Accumulator & Mtg Group-Hydraulic; -Work Tool | 1 |
| 21***58 | Motor & Mtg Group-Hydraulic Fan | 1 |
| 21***03 | Lines Group-Pilot | 1 |
218-6738 Kit-High Flow Conversion -Kit
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 21***38 | Kit-High Flow Conversion; -Kit | 1 |
| 26***04 | Bracket | 1 |
218-6737 Kit-High Flow Conversion
| 09***07 | Nut; (M12x1.75-Thd) | 1 |
| 09***66 | Bolt; (M8x1.25x75-mm) | 2 |
| 10***41 | Terminal-Receptacle; (18-Ga To 20-Ga) | 4 |
306-8888 Kit-Lowering Control Lines -Manual
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***90 | Fuse; (10 Amp) | 1 |
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
218-5957 Kit-Quick Coupler Conversion -Hydraulic
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***90 | Fuse; (10 Amp) | 1 |
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
218-6757 Kit-Quick Coupler Conversion -Hydraulic
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***90 | Fuse; (10 Amp) | 1 |
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
285-6113 Lines Gp-Bucket -Utility
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
154-5051 Lines Gp-Bucket
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
279-5416 Lines Gp-Bucket -Multipurpose
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***95 | Fitting As; (Quick Disconnect, Male) | 1 |
154-5019 Lines Gp-Bucket
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
279-5412 Lines Gp-Bucket -Industrial
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
279-5415 Lines Gp-Bucket -Multipurpose
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
154-5052 Lines Gp-Bucket -Multipurpose
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***95 | Fitting As; (Quick Disconnect, Male) | 1 |
293-0140 Lines Gp-Bucket -Multipurpose
| 14***19 | Connector As | 2 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
279-5414 Lines Gp-Bucket -Multipurpose
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
279-5413 Lines Gp-Bucket -Multipurpose
| 14***19 | Connector As | 2 |
| 15***56 | Tee As | 1 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
177-1986 Lines Gp-Connecting
| 14***15 | Connector As | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 6 |
| 14***42 | Connector Group | 2 |
231-5273 Lines Gp-Connecting
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***95 | Fitting As; (Quick Disconnect, Male) | 1 |
286-9279 Lines Gp-Grapple
| 10***29 | Stud; (M10x1.5-Thd) | 1 |
| 14***15 | Connector As | 1 |
| 14***16 | Connector Group | 1 |
286-9250 Lines Gp-Grapple
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 16***89 | Hose As | 2 |
165-8733 Lines Gp-Grapple
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 16***89 | Hose As | 2 |
161-0187 Lines Gp-Grapple -Industrial
| 14***19 | Connector As | 2 |
| 15***94 | Coupler As-Quick Disconnect; (Female)(Quick Disconnect) | 1 |
| 15***95 | Fitting As; (Quick Disconnect, Male) | 1 |
218-6059 Lines Gp-Hydraulic Fan -Without A/C
| 10***29 | Stud; (M10x1.5-Thd) | 1 |
| 14***15 | Connector As | 1 |
| 14***16 | Connector Group | 1 |
218-6693 Lines Gp-Hydraulic Fan
| 10***29 | Stud; (M10x1.5-Thd) | 1 |
| 14***15 | Connector As | 3 |
| 14***16 | Connector Group | 1 |
218-6533 Lines Gp-Hydraulic Fan
| 10***29 | Stud; (M10x1.5-Thd) | 1 |
| 14***15 | Connector As | 3 |
| 14***16 | Connector Group | 1 |
218-6528 Lines Gp-Hydraulic Fan -Without Heater Or A/C
| 10***29 | Stud; (M10x1.5-Thd) | 1 |
| 14***15 | Connector As | 3 |
| 14***16 | Connector Group | 1 |
218-6541 Lines Gp-Hydraulic Oil Cooler
| 14***97 | Block | 2 |
| 14***41 | Connector Group | 2 |
| 14***45 | Connector As | 1 |
218-6143 Lines Gp-Hydraulic Oil Cooler
| 10***15 | Elbow Group | 2 |
| 21***43 | Lines Group-Hydraulic Oil Cooler | 1 |
| 21***39 | Plate | 1 |
218-5707 Lines Gp-Lift Cylinder
| 14***97 | Block | 2 |
| 14***41 | Connector Group | 2 |
| 14***45 | Connector As | 1 |
218-5851 Lines Gp-Lift Cylinder
| 14***97 | Block | 2 |
| 14***15 | Connector As | 2 |
| 14***41 | Connector Group | 2 |
218-6604 Lines Gp-Lift Cylinder
| 14***97 | Block | 2 |
| 14***41 | Connector Group | 2 |
| 21***25 | Tube As | 1 |
218-6207 Lines Gp-Lift Cylinder
| 14***97 | Block | 2 |
| 14***41 | Connector Group | 2 |
| 18***73 | Tube As | 2 |
218-6211 Lines Gp-Lowering Control -Manual
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
| 16***24 | Elbow Group | 1 |
218-5882 Lines Gp-Lowering Control -Manual
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 14***65 | Elbow | 1 |
| 14***78 | Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs) | 1 |
218-6503 Lines Gp-Pilot
| 14***16 | Connector Group | 2 |
| 14***25 | Connector As. | 5 |
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 2 |
234-0788 Lines Gp-Pilot -Direction, Speed
| 14***15 | Connector As | 1 |
| 14***60 | Elbow Group | 1 |
| 15***40 | Hose; (30cm) | 1 |
218-6099 Lines Gp-Pilot -Work Tool
| 12***50 | Valve-Check; (Quick Coupler Solenoid) | 1 |
| 14***25 | Connector As. | 9 |
| 14***35 | Tee, -6 Orb / Orfs | 1 |
218-5978 Lines Gp-Pilot -Direction, Speed
| 12***50 | Valve-Check; (Quick Coupler Solenoid) | 1 |
| 14***25 | Connector As. | 9 |
| 14***35 | Tee, -6 Orb / Orfs | 1 |
218-6133 Lines Gp-Pump -High Flow
| 09***66 | Bolt; (M8x1.25x75-mm) | 2 |
| 14***34 | Hose As | 4 |
| 14***41 | Connector Group | 2 |
218-5903 Lines Gp-Pump
| 14***15 | Connector As | 1 |
| 14***60 | Elbow Group | 1 |
| 15***40 | Hose; (30cm) | 1 |
218-6132 Lines Gp-Pump
| 14***15 | Connector As | 1 |
| 14***60 | Elbow Group | 1 |
| 15***40 | Hose; (30cm) | 1 |
218-5901 Lines Gp-Pump
| 14***15 | Connector As | 1 |
| 14***60 | Elbow Group | 1 |
| 15***40 | Hose; (30cm) | 1 |
218-6607 Lines Gp-Tilt Cylinder
| 10***29 | Stud; (M10x1.5-Thd) | 4 |
| 14***27 | Connector Group | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
218-5819 Lines Gp-Tilt Cylinder -Without Work Tool Positioner
| 11***15 | Plate-Cover | 2 |
| 14***98 | Clip | 2 |
| 14***34 | Hose As | 4 |
218-5708 Lines Gp-Tilt Cylinder
| 09***66 | Bolt; (M8x1.25x75-mm) | 2 |
| 09***49 | Bolt; (M8x1.25x40-mm) | 1 |
| 14***34 | Hose As | 4 |
218-5852 Lines Gp-Tilt Cylinder
| 09***66 | Bolt; (M8x1.25x75-mm) | 2 |
| 14***34 | Hose As | 4 |
| 14***41 | Connector Group | 2 |
218-5853 Lines Gp-Work Tool -High Flow
| 10***29 | Stud; (M10x1.5-Thd) | 4 |
| 14***27 | Connector Group | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
218-6312 Lines Gp-Work Tool -High Flow
| 09***66 | Bolt; (M8x1.25x75-mm) | 2 |
| 09***49 | Bolt; (M8x1.25x40-mm) | 1 |
| 10***29 | Stud; (M10x1.5-Thd) | 4 |
218-6311 Lines Gp-Work Tool -Standard Flow
| 09***66 | Bolt; (M8x1.25x75-mm) | 2 |
| 09***49 | Bolt; (M8x1.25x40-mm) | 1 |
| 10***29 | Stud; (M10x1.5-Thd) | 4 |
218-6197 Lines Gp-Work Tool
| 09***66 | Bolt; (M8x1.25x75-mm) | 2 |
| 10***29 | Stud; (M10x1.5-Thd) | 2 |
| 11***83 | Connector | 1 |
159-5753 Manifold & Mtg Gp-Control -Work Tool Positioner
| 15***53 | Manifold & Mtg Group-Control; -Work Tool Positioner | 1 |
| 22***08 | Manifold & Solenoid Group-Control; -Work Tool Positioner | 1 |
| 7X***35 | Bolt; (M6x1x60-mm) | 2 |
231-5278 Manifold & Mtg Gp-Control -Angling Blade
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 15***79 | Kit-Seal; (Relief Valve, Conveyor Cont) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
191-9652 Manifold & Mtg Gp-Control
| 10***89 | Bolt; (M8x1.25x130-mm) | 3 |
| 19***52 | Manifold & Mtg Group-Control | 1 |
| 23***95 | Manifold Group-Control | 1 |
218-5812 Manifold & Mtg Gp-Control
| 21***12 | Manifold & Mtg Group-Control | 1 |
| 23***79 | Cover | 1 |
| 25***11 | Manifold Group-Control; -Angling Blade | 1 |
224-9418 Manifold & Solenoid Gp-Control -Work Tool Positioner
| 10***08 | Kit-Seal; (Solenoid Valve, Quick Steer) | 1 |
| 12***51 | Kit-Seal; (Pressure Relief Valve) | 1 |
| 22***18 | Manifold & Solenoid Group-Control; -Work Tool Positioner | 1 |
223-8408 Manifold & Solenoid Gp-Control -Work Tool Positioner
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 15***79 | Kit-Seal; (Relief Valve, Conveyor Cont) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
231-0295 Manifold Gp-Control
| 23***95 | Manifold Group-Control | 1 |
| 23***26 | Coil As | 2 |
| 24***11 | Wire As | 1 |
258-9011 Manifold Gp-Control -Angling Blade
| 23***27 | Motor Group-Gear; -Hydraulic Fan | 1 |
| 25***11 | Manifold Group-Control; -Angling Blade | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
233-7128 Manifold Gp-Control -Quick Coupler
| 10***08 | Kit-Seal; (Solenoid Valve, Quick Steer) | 1 |
| 13***11 | Valve-Check | 1 |
| 14***88 | Kit-Seal; (Ride Control, Switch) | 1 |
248-7696 Manifold Gp-Control -Boosted Auxiliary Hydraulic Flow
| 18***51 | Washer-Hard; (5.3x8.8x2-mm Thk) | 8 |
| 19***08 | Seal-O-Ring | 1 |
| 21***14 | Seal-O-Ring | 1 |
218-6058 Motor & Mtg Gp-Hydraulic Fan
| 21***79 | Motor Group-Gear; -Hydraulic Fan | 1 |
| 21***58 | Motor & Mtg Group-Hydraulic Fan | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
218-6758 Motor & Mtg Gp-Hydraulic Fan
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***30 | Wire As; (For Use Without A.I.H) | 1 |
| 13***45 | Pad; (Connector) | 1 |
261-6121 Motor & Mtg Gp-Hydraulic Fan
| 10***30 | Wire As; (For Use Without A.I.H) | 1 |
| 13***45 | Pad; (Connector) | 1 |
| 26***21 | Motor & Mtg Group-Hydraulic Fan | 1 |
230-3727 Motor Gp-Gear -Hydraulic Fan
| 09***94 | Ring-Retaining | 1 |
| 23***86 | Seal Group-Lip Type | 1 |
| 23***27 | Motor Group-Gear; -Hydraulic Fan | 1 |
307-3038 Motor Gp-Gear -Hydraulic Fan
| 15***12 | Pin | 2 |
| 15***13 | Pin | 2 |
| 30***38 | Motor Group-Gear; -Hydraulic Fan | 1 |
216-6179 Motor Gp-Gear -Hydraulic Fan
| 09***94 | Ring-Retaining | 1 |
| 21***79 | Motor Group-Gear; -Hydraulic Fan | 1 |
| 23***26 | Seal-Shaft | 1 |
218-6840 Motor Gp-Gear -Refrigerant Compressor
| 09***94 | Ring-Retaining | 1 |
| 21***40 | Motor Group-Gear; -Refrigerant Compressor | 1 |
| 22***40 | Valve Group-Relief; (Gear Motor) | 1 |
269-9467 Motor Gp-Gear
| 09***94 | Ring-Retaining | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
| 23***86 | Seal Group-Lip Type | 1 |
286-9248 Mounting Gp-Cylinder -Grapple Bucket
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 1 |
| 28***48 | Mounting Group-Cylinder; -Grapple Bucket | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
154-5011 Mounting Gp-Cylinder
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***13 | Plate | 1 |
| 15***41 | Pin | 2 |
156-0891 Mounting Gp-Cylinder -Industrial
| 15***13 | Pin | 2 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 6V***89 | Locknut; (M8x1.25-Thd) | 2 |
165-8731 Mounting Gp-Cylinder -Utility
| 15***41 | Pin | 2 |
| 15***42 | Pin | 2 |
| 16***31 | Mounting Group-Cylinder; -Utility | 1 |
142-8714 Plug Gp-Pilot Valve
| 14***14 | Plug Group-Pilot Valve | 1 |
| 22***38 | Pump Group-Gear; -Work Tool, High Flow | 1 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 2 |
218-6079 Pump & Mtg Gp-Work Tool -High Flow
| 21***79 | Pump & Mtg Group-Work Tool; -High Flow | 1 |
| 23***06 | Pump Group-Gear; -Work Tool | 1 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 2 |
218-6175 Pump & Mtg Gp-Work Tool -Standard Flow
| 21***75 | Pump & Mtg Group-Work Tool; -Standard Flow | 1 |
| 26***27 | Pump Group-Gear; -Work Tool | 1 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 2 |
295-7268 Pump & Mtg Gp-Work Tool
| 23***57 | Seal-Shaft | 2 |
| 27***60 | Washer-Hard; (15x22x2.5-mm Thk) | 4 |
| 27***14 | Kit-Seal; (Gear Pump) | 1 |
261-6095 Pump & Mtg Gp-Work Tool
| 26***95 | Pump & Mtg Group-Work Tool | 1 |
| 30***50 | Pipe, Pump Group-Gear | 1 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 2 |
261-6094 Pump & Mtg Gp-Work Tool
| 23***57 | Seal-Shaft | 2 |
| 26***94 | Pump & Mtg Group-Work Tool | 1 |
| 26***65 | Pump Group-Gear | 1 |
236-5106 Pump Gp-Gear -Work Tool
| 09***94 | Ring-Retaining | 1 |
| 23***26 | Seal-Shaft | 1 |
| 23***06 | Pump Group-Gear; -Work Tool | 1 |
307-3050 Pump Gp-Gear
| 15***14 | Bracket | 1 |
| 20***91 | Tank Group-Hydraulic | 1 |
| 20***29 | Breather; (Inline)(Breather)(Hydraulic Oil) | 1 |
225-9238 Pump Gp-Gear -Work Tool, High Flow
| 22***38 | Pump Group-Gear; -Work Tool, High Flow | 1 |
| 23***57 | Seal-Shaft | 2 |
| 27***60 | Washer-Hard; (15x22x2.5-mm Thk) | 4 |
269-9427 Pump Gp-Gear -Work Tool
| 23***57 | Seal-Shaft | 2 |
| 26***27 | Pump Group-Gear; -Work Tool | 1 |
| 27***60 | Washer-Hard; (15x22x2.5-mm Thk) | 4 |
269-9462 Pump Gp-Gear
| 23***57 | Seal-Shaft | 2 |
| 26***62 | Pump Group-Gear | 1 |
| 27***60 | Washer-Hard; (15x22x2.5-mm Thk) | 4 |
233-5980 Tank & Mtg Gp-Hydraulic
| 09***74 | Bolt-Socket Head; (M5x0.8x12-mm) | 6 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***56 | Seal-O-Ring | 1 |
204-1491 Tank Gp-Hydraulic
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 14***25 | Connector As. | 4 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 3 |
218-6263 Valve & Lines Gp-Coupler -With Manual Lowering Control
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 14***25 | Connector As. | 4 |
218-6240 Valve & Lines Gp-Coupler
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 14***25 | Connector As. | 4 |
218-6781 Valve & Mtg Gp-Control
| 19***86 | Valve Group-Control; -Work Tool | 1 |
| 21***61 | Bracket | 1 |
| 21***81 | Valve & Mtg Group-Control | 1 |
218-6787 Valve & Mtg Gp-Control
| 14***44 | Valve Group-Solenoid | 1 |
| 18***69 | Manifold | 1 |
| 21***87 | Valve & Mtg Group-Control | 1 |
218-6783 Valve & Mtg Gp-Control
| 21***66 | Valve Group-Control | 1 |
| 21***61 | Bracket | 1 |
| 21***83 | Valve & Mtg Group-Control | 1 |
218-6786 Valve & Mtg Gp-Control
| 21***68 | Valve Group-Control | 1 |
| 21***61 | Bracket | 1 |
| 21***86 | Valve & Mtg Group-Control | 1 |
209-0640 Valve & Mtg Gp-Solenoid
| 00***82 | Spring | 3 |
| 12***16 | Bolt-Shoulder | 1 |
| 14***31 | Valve-Check | 3 |
191-9686 Valve Gp-Control -Work Tool
| 00***82 | Spring | 3 |
| 12***16 | Bolt-Shoulder | 1 |
| 14***31 | Valve-Check | 3 |
216-6168 Valve Gp-Control
| 00***82 | Spring | 3 |
| 12***16 | Bolt-Shoulder | 1 |
| 14***31 | Valve-Check | 3 |
216-6166 Valve Gp-Control
| 00***82 | Spring | 3 |
| 12***16 | Bolt-Shoulder | 1 |
| 14***31 | Valve-Check | 3 |
216-6167 Valve Gp-Control -Work Tool
| 00***82 | Spring | 3 |
| 12***16 | Bolt-Shoulder | 1 |
| 14***31 | Valve-Check | 3 |
112-1817 Valve Gp-Manual -Lowering Control
| 11***17 | Valve Group-Manual; -Ride Control-Hydraulic Lockout | 1 |
| 12***04 | Plate | 1 |
| 15***65 | Kit-Seal; (Pilot Valve) | 1 |
299-9116 Valve Gp-Pilot -Direction, Speed
| 03***79 | Seal-O-Ring (Id=10.82mm) | 3 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 2 |
| 03***69 | Nut; (3/8-24-Thd) | 1 |
228-9228 Valve Gp-Pilot -Work Tool
| 15***65 | Kit-Seal; (Pilot Valve) | 1 |
| 16***78 | Kit-Pilot Valve; (Spring)(Pilot Valve Lift & Dump) | 1 |
| 19***00 | Valve Group-Solenoid; -12-Volt-Work Tool | 1 |
218-6119 Valve Gp-Pilot -Direction, Speed
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 16***78 | Kit-Pilot Valve; (Spring)(Pilot Valve Lift & Dump) | 1 |
| 16***40 | Plate | 1 |
295-1800 Valve Gp-Relief
| 13***76 | Seal-O-Ring | 1 |
| 29***00 | Valve Group-Relief | 1 |
188-0878 Valve Gp-Relief -Main
| 13***76 | Seal-O-Ring | 1 |
| 18***78 | Valve Group-Relief; -Main | 1 |
298-1309 Valve Gp-Relief -Main
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***48 | Kit-Seal; (Solenoid Valve) | 1 |
| 14***43 | Solenoid As | 1 |
185-4254 Valve Gp-Solenoid
| 18***54 | Valve Group-Solenoid; -Auxiliary | 1 |
| 20***71 | Kit-Seal; (Solenoid Valve) | 1 |
| 21***61 | Flange | 1 |
231-6287 Valve Gp-Solenoid -A/C Compressor
| 23***87 | Valve Group-Solenoid; -A/C Compressor | 1 |
| 23***26 | Coil As | 1 |
259-8194 Valve Gp-Solenoid -Parking Brake
| 21***44 | Bracket As | 1 |
| 25***94 | Valve Group-Solenoid; -Parking Brake | 1 |
195-9700 Valve Gp-Solenoid -12-Volt
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***70 | Nut; (1/2-20-2b-Thd) | 2 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
144-1644 Valve Gp-Solenoid
| 14***44 | Valve Group-Solenoid | 1 |
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
| 21***73 | Nut; (1/2-28-Thd) | 1 |
Implements
222-5695 Bracket Gp-Support
| 15***62 | Film-Information; (Tie-Down Location) | 2 |
| 18***33 | Step Group-Material Handling Arm | 1 |
| 21***50 | Arm As | 1 |
Lubrication System
246-3515 Filter Gp-Engine Oil
| 11***45 | Connector | 1 |
| 15***79 | Stud-Hollow | 1 |
| 16***19 | Seal-O-Ring | 1 |
Machine Arrangement
218-6610 Chassis Ar
| 15***09 | Guide Group-Lines; -Auxiliary Hydraulic | 1 |
| 21***33 | Lines Group-Fuel Prm & Filter | 1 |
| 21***02 | Control Group-Governor | 1 |
218-5910 Chassis Ar
| 15***09 | Guide Group-Lines; -Auxiliary Hydraulic | 1 |
| 21***02 | Control Group-Governor | 1 |
| 21***50 | Bumper Group; -Rear | 1 |
278-1216 Common Ar
| 21***10 | Chassis Ar | 1 |
| 21***77 | Film Group | 1 |
| 21***50 | Cab Ar-Enclosed Rops | 1 |
218-6232 Common Ar
| 21***00 | Power Train Ar | 1 |
| 21***17 | Film Group | 1 |
| 21***32 | Common Ar | 1 |
278-1232 Common Ar
| 21***00 | Power Train Ar | 1 |
| 21***17 | Film Group | 1 |
| 21***50 | Cab Ar-Enclosed Rops | 1 |
218-6216 Common Ar
| 21***20 | Hydraulic Ar | 1 |
| 21***10 | Chassis Ar | 1 |
| 21***77 | Film Group | 1 |
278-1226 Common Ar
| 14***30 | Counterweight Group | 1 |
| 21***10 | Chassis Ar | 1 |
| 21***78 | Film Group | 1 |
218-6226 Common Ar
| 14***30 | Counterweight Group | 1 |
| 21***11 | Installation Ar-Engine | 1 |
| 21***20 | Hydraulic Ar | 1 |
218-6242 Common Ar
| 21***11 | Installation Ar-Engine | 1 |
| 21***00 | Power Train Ar | 1 |
| 21***18 | Film Group | 1 |
278-1242 Common Ar
| 21***18 | Film Group | 1 |
| 21***50 | Cab Ar-Enclosed Rops | 1 |
| 21***10 | Chassis Ar | 1 |
342-5002 Control Ar-Machine -Aux Proportional Flow
| 21***18 | Control Group-Pilot Operated Hydraulic; -Work Tool | 1 |
| 21***47 | Control Group-Pilot Operated Hydraulic; -Hydrostatic | 1 |
| 34***02 | Control Ar-Machine; -Auxiliary Proportional Flow | 1 |
342-5001 Control Ar-Machine -Aux Proportional Flow
| 21***18 | Control Group-Pilot Operated Hydraulic; -Work Tool | 1 |
| 21***33 | Control Group-Pilot Operated Hydraulic | 1 |
| 34***01 | Control Ar-Machine; -Auxiliary Proportional Flow | 1 |
278-1225 Conversion Ar-Machine -Germany
| 17***22 | Visor Group-Cab | 1 |
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
278-5409 Conversion Ar-Machine -Italy, High Flow
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 18***47 | Lifting Group-Machine; -4-Point | 1 |
261-6155 Conversion Ar-Machine -Outside Nacd
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 21***46 | Box Group-Storage | 1 |
| 21***01 | Floor Mat | 1 |
261-6197 Conversion Ar-Machine -Outside Nacd
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 21***46 | Box Group-Storage | 1 |
| 21***01 | Floor Mat | 1 |
261-6156 Conversion Ar-Machine -Outside Nacd
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 18***47 | Lifting Group-Machine; -4-Point | 1 |
| 21***46 | Box Group-Storage | 1 |
278-1221 Conversion Ar-Machine -Outside Nacd
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 18***47 | Lifting Group-Machine; -4-Point | 1 |
| 19***84 | Film Group; -Clearance | 1 |
261-6187 Conversion Ar-Machine -Germany, Italy
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 21***15 | Lighting Group-Roading | 1 |
278-5413 Conversion Ar-Machine -Germany
| 17***22 | Visor Group-Cab | 1 |
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
278-5441 Conversion Ar-Machine -Germany, High Flow
| 17***22 | Visor Group-Cab | 1 |
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
278-5442 Conversion Ar-Machine -Germany, High Flow
| 17***22 | Visor Group-Cab | 1 |
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
340-7717 Conversion Ar-Machine
| 18***47 | Lifting Group-Machine; -4-Point | 1 |
| 21***46 | Box Group-Storage | 1 |
| 21***91 | Panel Ar-Instrument; -Eame | 1 |
278-1212 Conversion Ar-Machine -Italy
278-1220 Conversion Ar-Machine -Outside Nacd
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 19***84 | Film Group; -Clearance | 1 |
| 21***46 | Box Group-Storage | 1 |
278-5369 Conversion Ar-Machine -Italy
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 21***15 | Lighting Group-Roading | 1 |
261-6160 Conversion Ar-Machine -Nacd
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 21***90 | Panel Ar-Instrument; -Nacd | 1 |
| 21***58 | Motor & Mtg Group-Hydraulic Fan | 1 |
278-5414 Conversion Ar-Machine -Germany
| 17***22 | Visor Group-Cab | 1 |
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
278-5408 Conversion Ar-Machine -Italy, High Flow
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 21***15 | Lighting Group-Roading | 1 |
261-6158 Conversion Ar-Machine -Outside Nacd
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 18***47 | Lifting Group-Machine; -4-Point | 1 |
| 21***46 | Box Group-Storage | 1 |
278-5348 Conversion Ar-Machine -United Kingdom
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 18***47 | Lifting Group-Machine; -4-Point | 1 |
| 19***84 | Film Group; -Clearance | 1 |
252-0449 Conversion Ar-Machine -Nacd
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 21***90 | Panel Ar-Instrument; -Nacd | 1 |
| 21***75 | Pump & Mtg Group-Work Tool; -Standard Flow | 1 |
278-1224 Conversion Ar-Machine -Germany
| 17***22 | Visor Group-Cab | 1 |
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
261-6157 Conversion Ar-Machine -Outside Nacd
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 21***46 | Box Group-Storage | 1 |
| 21***01 | Floor Mat | 1 |
278-1213 Conversion Ar-Machine -Italy
278-5347 Conversion Ar-Machine -Outside Nacd
| 14***52 | Lighting Group-Stop & Tail | 1 |
| 19***84 | Film Group; -Clearance | 1 |
| 21***46 | Box Group-Storage | 1 |
278-5370 Conversion Ar-Machine -Italy
| 17***38 | Lock Group-Quick Coupler; -Mechanical | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 18***47 | Lifting Group-Machine; -4-Point | 1 |
340-7715 Conversion Ar-Machine
| 21***46 | Box Group-Storage | 1 |
| 21***91 | Panel Ar-Instrument; -Eame | 1 |
| 21***08 | Lifting Group-Machine | 1 |
340-7714 Conversion Ar-Machine -Outside Nacd
| 21***46 | Box Group-Storage | 1 |
| 21***91 | Panel Ar-Instrument; -Eame | 1 |
| 21***08 | Lifting Group-Machine | 1 |
Operator Station
176-3900 Accumulator Gp-Refrigerant -Uncharged
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***15 | Connector | 1 |
186-6190 Accumulator Gp-Refrigerant -Charged
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***15 | Connector | 1 |
229-8747 Air Conditioner & Mounting Gp
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***15 | Connector | 1 |
218-6302 Air Conditioner Ar
| 21***02 | Air Conditioner Ar | 1 |
| 22***09 | Glass-Cab; (Door) | 1 |
| 22***10 | Glass-Cab; (Door) | 1 |
218-6273 Air Conditioner Ar
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***15 | Connector | 1 |
218-6405 Air Conditioner Gp
| 03***28 | Grommet | 1 |
| 10***45 | Blade As-Wiper; (600-mm) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
236-4830 Armrest & Mounting Gp
| 03***28 | Grommet | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
236-4833 Armrest Gp
| 03***28 | Grommet | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
218-6420 Box Gp-Storage -Literature
| 14***71 | Louver As | 6 |
| 17***05 | Screw-Button Head; (M6 X 1.0 X) | 8 |
| 21***96 | Duct; (Crossover) | 1 |
216-6146 Box Gp-Storage
| 21***46 | Box Group-Storage | 1 |
| 27***32 | Seal | 1 |
| 28***59 | Frame As | 1 |
218-6350 Cab Ar-Enclosed Rops
| 14***71 | Louver As | 6 |
| 17***05 | Screw-Button Head; (M6 X 1.0 X) | 8 |
| 21***50 | Cab Ar-Enclosed Rops | 1 |
322-5614 Cab Gp-Enclosed Rops
| 23***26 | Frame As-Window; (Rh) | 1 |
| 23***29 | Kit-Latch | 1 |
| 23***01 | Hinge | 1 |
218-6367 Cab Gp-Enclosed Rops
| 14***71 | Louver As | 6 |
| 17***05 | Screw-Button Head; (M6 X 1.0 X) | 8 |
| 21***67 | Cab Group-Enclosed Rops | 1 |
276-0074 Cable Gp-Control
| 23***28 | Frame As-Window; (Lh) | 1 |
| 23***29 | Kit-Latch | 1 |
| 23***01 | Hinge | 1 |
298-7198 Cable Gp-Control -Manual Lowering
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 2 |
| 14***58 | Switch As-Start; (Key)(Ignition) | 1 |
| 15***94 | Panel | 1 |
218-6832 Compressor & Motor Gp-Refrig
| 08***77 | Lamp Group-Dome; (12-Volt) | 1 |
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 2 |
| 15***97 | Panel | 1 |
218-6830 Compressor & Mtg Gp-Refrig
| 08***77 | Lamp Group-Dome; (12-Volt) | 1 |
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 2 |
| 15***97 | Panel | 1 |
218-6348 Condenser & Mtg Gp-Refrigerant
| 15***61 | Plate As-Fops | 1 |
| 21***48 | Condenser & Mtg Group-Refrigerant | 1 |
| 23***33 | Film; (Stripe, Lh) | 1 |
218-6485 Control Gp-Handle -Direction, Speed
| 21***85 | Control Group-Handle; -Direction, Speed | 1 |
| 28***14 | Handle | 1 |
| 29***37 | Nut | 1 |
231-4256 Control Gp-Handle -Lh
| 15***53 | Grommet | 1 |
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
218-6490 Control Gp-Handle -Work Tool
| 15***53 | Grommet | 1 |
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
231-4260 Control Gp-Handle -Rh
| 18***15 | Clip | 10 |
| 20***98 | Knob-Control; (Temperature Select) | 1 |
| 21***99 | Seal | 1 |
231-4259 Control Gp-Handle -Rh
| 21***86 | Lines Group-Heater | 1 |
| 21***94 | Duct Group-Cab Air | 1 |
| 21***28 | Lines Group-Hydraulic Fan; -Without Heater Or A/C | 1 |
231-4257 Control Gp-Handle -Rh
| 21***93 | Heater Group-Cab | 1 |
| 23***57 | Control Group-Handle; -Rh | 1 |
| 7X***37 | Bolt-Plt; (M8 X 1.25 X 35) | 4 |
218-6480 Control Gp-Handle -Direction, Speed
| 21***77 | Handle | 1 |
| 21***80 | Control Group-Handle; -Direction, Speed | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
231-4258 Control Gp-Handle -Lh
| 21***59 | Lines Group-Hydraulic Fan; -Without A/C | 1 |
| 21***86 | Lines Group-Heater | 1 |
| 21***94 | Duct Group-Cab Air | 1 |
218-5930 Control Gp-Pilot Operated Hyd -Hydrostatic
| 21***30 | Control Group-Pilot Operated Hydraulic; -Hydrostatic | 1 |
| 21***59 | Lines Group-Hydraulic Fan; -Without A/C | 1 |
| 21***19 | Cover Group-Console; -Without Air Conditioner, Heater | 1 |
218-5933 Control Gp-Pilot Operated Hyd
| 08***91 | Bolt; (M10x1.5x55-mm) | 2 |
| 10***74 | Seal-Connector | 2 |
| 10***96 | Clip | 2 |
218-5618 Control Gp-Pilot Operated Hyd -Work Tool
| 12***78 | Locknut; (M6x1-Thd) | 2 |
| 13***40 | Locknut; (M8x1.25-Thd) | 4 |
| 21***18 | Control Group-Pilot Operated Hydraulic; -Work Tool | 1 |
218-6571 Control Gp-Pilot Operated Hyd
| 12***78 | Locknut; (M6x1-Thd) | 2 |
| 19***63 | Lever Group-Hand Control; (Governor) | 1 |
| 21***71 | Control Group-Pilot Operated Hydraulic | 1 |
218-5947 Control Gp-Pilot Operated Hyd -Hydrostatic
| 09***25 | Pin-Clevis | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 12***15 | Connector | 1 |
218-5932 Control Gp-Pilot Operated Hyd -Hydrostatic
| 08***91 | Bolt; (M10x1.5x55-mm) | 2 |
| 10***74 | Seal-Connector | 2 |
| 10***96 | Clip | 2 |
218-5931 Control Gp-Pilot Operated Hyd -Hydrostatic
| 21***31 | Control Group-Pilot Operated Hydraulic; -Hydrostatic | 1 |
| 21***19 | Cover Group-Console; -Without Air Conditioner, Heater | 1 |
| 21***28 | Lines Group-Hydraulic Fan; -Without Heater Or A/C | 1 |
218-5611 Control Gp-Pilot Operated Hyd -Work Tool
| 00***10 | Elbow | 1 |
| 13***53 | Hose; (192.5cm) (X2) | 0 |
| 14***71 | Louver As | 6 |
218-5612 Control Gp-Pilot Operated Hyd -Work Tool
| 21***12 | Control Group-Pilot Operated Hydraulic; -Work Tool | 1 |
276-5708 Coupling Gp-Drive -Refrigerant Compressor, Motor
| 21***57 | Insulation | 1 |
| 21***59 | Liner-Rear Wall | 1 |
| 21***36 | Insulation | 1 |
218-6419 Cover Gp-Console -Without Air Conditioner, Heater
| 21***19 | Cover Group-Console; -Without Air Conditioner, Heater | 1 |
142-9118 Cover Gp-Instrument Panel -Service Meter
| 08***91 | Bolt; (M10x1.5x55-mm) | 2 |
| 10***96 | Clip | 2 |
| 14***18 | Cover Group-Instrument Panel; -Service Meter | 1 |
218-6440 Door & Mtg Gp-Cab -Polycarbonate
| 08***91 | Bolt; (M10x1.5x55-mm) | 2 |
| 10***96 | Clip | 2 |
| 18***90 | Accumulator Group-Refrigerant; -With Desiccant | 1 |
223-0600 Door & Mtg Gp-Cab -Glass
| 13***53 | Hose; (192.5cm) (X2) | 0 |
| 15***68 | Adapter | 1 |
| 17***79 | Insulation | 1 |
276-3440 Door Gp-Cab -Polycarbonate
| 15***78 | Mount As | 2 |
| 15***81 | Mount | 2 |
| 15***90 | Bracket | 1 |
223-0616 Door Gp-Cab -Glass
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 9 |
218-6431 Door Gp-Cab -Glass
| 21***84 | Mirror As | 1 |
| 21***31 | Door Group-Cab; -Glass | 1 |
| 3B***05 | Washer,Lock Tube Assembly Mounting; Used On Engine P/N 5r698 | 1 |
218-6441 Door Gp-Cab -Polycarbonate
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 10 |
| 21***41 | Door Group-Cab; -Polycarbonate | 1 |
276-3615 Door Gp-Cab -Polycarbonate
| 22***98 | Panel Group-Instrument; -Nacd | 1 |
| 27***15 | Door Group-Cab; -Polycarbonate | 1 |
218-6394 Duct Gp-Cab Air
| 09***36 | Terminal-Blade; (18-Ga To 22-Ga) | 44 |
| 09***34 | Terminal-Blade; (18-Ga To 22-Ga) | 3 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
231-7327 Frame Gp-Window -Lh
| 13***43 | Bolt-Round Head; (M6x1-6g-Thd) | 5 |
| 19***85 | Plate; (Rh) | 1 |
| 21***23 | Plate; (Lh) | 1 |
231-7325 Frame Gp-Window -Rh
| 13***43 | Bolt-Round Head; (M6x1-6g-Thd) | 5 |
| 19***85 | Plate; (Rh) | 1 |
| 21***34 | Plate; (Lh) | 1 |
216-4713 Gauge & Warning Gp -Rh
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 4 |
| 12***78 | Locknut; (M6x1-Thd) | 1 |
| 16***54 | Kit-Service; (Pedal) | 1 |
216-4712 Gauge & Warning Gp -Lh
| 11***58 | Washer; (6.5x17x1-mm Thk) | 4 |
| 12***43 | Seal; (70-cm) | 0 |
| 21***12 | Gauge & Warning Group; -Lh | 1 |
233-5632 Guard Gp-Rops/Fops
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 1 |
| 12***43 | Seal; (70-cm) | 0 |
| 21***16 | Plate As | 1 |
218-6400 Handhold Gp
| 0T***44 | Bolt (1.25" Long) | 2 |
| 21***00 | Handhold Group | 1 |
| 6E***49 | Washer; (11x27x6-mm Thk) | 2 |
298-7197 Handle Gp
| 0T***44 | Bolt (1.25" Long) | 2 |
| 29***97 | Handle Group | 1 |
| 6E***49 | Washer; (11x27x6-mm Thk) | 2 |
218-6117 Handle Gp-Modular
| 0T***44 | Bolt (1.25" Long) | 2 |
| 21***17 | Handle Group-Modular | 1 |
| 6E***49 | Washer; (11x27x6-mm Thk) | 2 |
218-6118 Handle Gp-Modular
| 0T***44 | Bolt (1.25" Long) | 2 |
| 21***18 | Handle Group-Modular | 1 |
| 6E***49 | Washer; (11x27x6-mm Thk) | 2 |
229-8746 Heater & Mtg Gp-Cab
| 0T***44 | Bolt (1.25" Long) | 2 |
| 22***46 | Heater & Mtg Group-Cab | 1 |
| 2D***12 | Washer; (7/16x15/16x1/4-In Thk) | 2 |
218-6272 Heater Ar-Cab
| 0T***44 | Bolt (1.25" Long) | 2 |
| 21***72 | Heater Ar-Cab | 1 |
| 2D***12 | Washer; (7/16x15/16x1/4-In Thk) | 2 |
218-6703 Heater Ar-Cab
| 0T***44 | Bolt (1.25" Long) | 2 |
| 21***03 | Heater Ar-Cab | 1 |
| 2D***12 | Washer; (7/16x15/16x1/4-In Thk) | 2 |
218-6393 Heater Gp-Cab
| 0T***44 | Bolt (1.25" Long) | 2 |
| 21***93 | Heater Group-Cab | 1 |
| 2D***12 | Washer; (7/16x15/16x1/4-In Thk) | 2 |
218-6746 Heater Gp-Cab -Kit
| 21***46 | Heater Group-Cab; -Kit | 1 |
| 21***80 | Seat Group-Adjustable | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 4 |
245-6811 Holder-Cup
| 15***60 | Switch; (Seat) | 1 |
| 15***85 | Wire As | 1 |
| 21***62 | Seat Group; (Static) | 1 |
231-8122 Housing As-Side -Air Conditioner, Heater
| 15***85 | Wire As | 1 |
| 15***86 | Switch As; (Seat) | 1 |
| 15***11 | Kit-Spring; (Adjustable Seat) | 1 |
218-6271 Installation Gp-Cover & Lines -Without Heater Or A/C
| 09***25 | Pin-Clevis | 1 |
| 15***82 | Spring-Gas; (Non-Locking) | 1 |
| 17***05 | Pin | 1 |
218-6701 Installation Gp-Cover & Lines -Without Heater Or A/C
| 1D***77 | Bolt-Round Head; (3/8-16x1-In) | 2 |
| 21***01 | Installation Group-Cover & Lines; -Without Heater Or A/C | 1 |
| 2S***17 | Nut,Plain,Castellat; (3/8-16-Thd) | 1 |
233-5588 Kit-Air Cond & Heater Instl
| 16***62 | Plate As | 1 |
| 16***69 | Visor Group-Cab | 1 |
| 19***36 | Insert-Threaded; (M6x1-Thd) | 4 |
233-5589 Kit-Air Cond & Heater Instl
| 14***19 | Window; (Rear) | 1 |
| 19***68 | Insulation | 1 |
| 20***18 | Window-Plastic; (Top) | 1 |
218-6743 Kit-Cab Door & Mounting -Polycarbonate
| 10***57 | Strip; (Locking) (275cm) | 0 |
| 10***56 | Seal; (275cm) | 0 |
| 14***19 | Window; (Rear) | 1 |
218-6744 Kit-Cab Door & Mounting -Glass
| 21***44 | Kit-Cab Door & Mounting; -Glass | 1 |
| 22***57 | Window Group-Cab; -Upper,Lh | 1 |
| 22***58 | Window Group-Cab; -Upper, Rh | 1 |
233-5864 Kit-Cab Seal -Debris Barrier
| 22***57 | Window Group-Cab; -Upper,Lh | 1 |
| 22***58 | Window Group-Cab; -Upper, Rh | 1 |
| 23***21 | Window As-Cab; (Lower, Rh) | 1 |
234-0774 Lever Gp-Governor
| 20***39 | Seal; (138-cm) | 0 |
| 20***73 | Seal; (220-cm) | 0 |
| 23***22 | Window As-Cab; (Sliding, Rear) | 1 |
218-6356 Liner Gp-Cab
| 20***39 | Seal; (138-cm) | 0 |
| 20***73 | Seal; (220-cm) | 0 |
| 21***56 | Liner Group-Cab | 1 |
142-9311 Liner-Cab -Gray
| 12***37 | Seal | 2 |
| 14***11 | Liner-Cab; -Gray | 1 |
| 15***68 | Strip | 2 |
218-6590 Lines Gp-Air Conditioner
| 12***10 | Film; (Red Stripe)(Red Stripe - 1225 cm) | 0 |
| 15***74 | Plate | 1 |
| 15***75 | Plate-Information | 1 |
218-6560 Lines Gp-Air Conditioner
| 12***10 | Film; (Red Stripe)(Red Stripe - 1225 cm) | 0 |
| 15***74 | Plate | 1 |
| 15***75 | Plate-Information | 1 |
218-6086 Lines Gp-Heater
| 12***10 | Film; (Red Stripe)(Red Stripe - 1225 cm) | 0 |
| 15***74 | Plate | 1 |
| 15***75 | Plate-Information | 1 |
6v-1970 Literature Gp
| 12***10 | Film; (Red Stripe)(Red Stripe - 1225 cm) | 0 |
| 15***62 | Film-Information; (Tie-Down Location) | 4 |
| 16***89 | Film; (Caterpillar) | 1 |
218-6395 Mirror Gp-Rear View
| 12***10 | Film; (Red Stripe)(Red Stripe - 1225 cm) | 0 |
| 15***62 | Film-Information; (Tie-Down Location) | 4 |
| 16***89 | Film; (Caterpillar) | 1 |
223-6537 Module Gp-Warning Indicator
| 12***10 | Film; (Red Stripe)(Red Stripe - 1225 cm) | 0 |
| 15***62 | Film-Information; (Tie-Down Location) | 4 |
| 16***89 | Film; (Caterpillar) | 1 |
249-2910 Module Gp-Warning Indicator
| 24***10 | Module Group-Warning Indicator | 1 |
| 25***15 | Film-Identification; (Un)(Front) | 1 |
| 25***16 | Film-Identification; (Un)(Side) | 2 |
229-7224 Module Gp-Warning Indicator -12-Volt
| 12***10 | Film; (Red Stripe)(Red Stripe - 1225 cm) | 0 |
| 15***62 | Film-Information; (Tie-Down Location) | 4 |
| 16***89 | Film; (Caterpillar) | 1 |
218-6370 Mounting Gp-Rops
| 21***70 | Mounting Group-Rops | 1 |
| 29***33 | Film-Information; (Power) | 1 |
218-5790 Panel Ar-Instrument -Nacd
| 21***90 | Panel Ar-Instrument; -Nacd | 1 |
| 29***34 | Film-Information | 1 |
218-5791 Panel Ar-Instrument -Eame
| 19***10 | Film-Identification; (Synthetic Hydraulic Oil, Read Omm) | 1 |
| 21***91 | Panel Ar-Instrument; -Eame | 1 |
225-7998 Panel Gp-Instrument -Nacd
| 15***62 | Film-Information; (Tie-Down Location) | 4 |
| 15***53 | Film-Information; (Read Omm) | 1 |
| 16***76 | Film; (Identification) (12v) (On Rear Console Behind Operators Seat) | 1 |
216-4751 Panel Gp-Instrument -Eame
| 15***62 | Film-Information; (Tie-Down Location) | 4 |
| 15***53 | Film-Information; (Read Omm) | 1 |
| 16***76 | Film; (Identification) (12v) (On Rear Console Behind Operators Seat) | 1 |
229-8744 Panel Gp-Side -Without Heater Or A/C
| 12***56 | Film; (Warning) (No Step) (On Top Of Hood Behind Cab On Each Side) (On Each Fender Flare) | 1 |
| 15***35 | Film-Warning; (Crush Hazard, Stay Back) | 1 |
| 22***42 | Film-Warning; (Crush Hazard, Stay Back, U.S.) | 2 |
218-6428 Panel Gp-Side
| 15***62 | Film-Information; (Tie-Down Location) | 4 |
| 15***53 | Film-Information; (Read Omm) | 1 |
| 16***76 | Film; (Identification) (12v) (On Rear Console Behind Operators Seat) | 1 |
218-6430 Panel Gp-Side
| 15***62 | Film-Information; (Tie-Down Location) | 4 |
| 15***53 | Film-Information; (Read Omm) | 1 |
| 16***76 | Film; (Identification) (12v) (On Rear Console Behind Operators Seat) | 1 |
218-5565 Pedal Gp-Governor -Includes Lever
| 16***89 | Tack-Fastener | 4 |
| 21***65 | Pedal Group-Governor; -Includes Lever | 1 |
| 22***69 | Film-Warning; (Do Not Operate, Read Omm) | 1 |
325-8382 Pedal Gp-Governor
| 19***10 | Film-Identification; (Synthetic Hydraulic Oil, Read Omm) | 1 |
| 32***82 | Pedal Group-Governor | 1 |
218-6360 Platform Gp-Operator
| 21***60 | Platform Group-Operator | 1 |
218-6407 Seal Gp-Cab -Debris Barrier
| 21***07 | Seal Group-Cab; -Debris Barrier | 1 |
218-6653 Seat Belt Gp
| 21***53 | Seat Belt Group | 1 |
218-6663 Seat Belt Gp
| 21***63 | Seat Belt Group | 1 |
276-7277 Seat Belt Gp
| 27***77 | Seat Belt Group | 1 |
218-6654 Seat Belt Gp
| 21***54 | Seat Belt Group | 1 |
276-6020 Seat Belt Gp
| 27***20 | Seat Belt Group | 1 |
276-6019 Seat Belt Gp
| 27***19 | Seat Belt Group | 1 |
218-6664 Seat Belt Gp
| 21***64 | Seat Belt Group | 1 |
276-7276 Seat Belt Gp
| 27***76 | Seat Belt Group; -Suspension | 1 |
142-9305 Seat Gp -Suspension
| 14***05 | Seat Group; -Suspension | 1 |
218-5562 Seat Gp -Static
| 21***62 | Seat Group; -Static | 1 |
219-4380 Seat Gp-Adjustable
| 21***80 | Seat Group-Adjustable | 1 |
218-6380 Spring Gp-Gas -Cab, Door
| 21***80 | Spring Group-Gas; -Cab, Door | 1 |
166-2569 Visor Gp-Cab
| 16***69 | Visor Group-Cab | 1 |
173-3022 Visor Gp-Cab
| 17***22 | Visor Group-Cab | 1 |
195-6723 Window Gp-Cab -Rear
| 19***23 | Window Group-Cab; -Rear | 1 |
224-7057 Window Gp-Cab -Upper,Lh
| 22***57 | Window Group-Cab; -Upper,Lh | 1 |
224-7058 Window Gp-Cab -Upper, Rh
| 22***58 | Window Group-Cab; -Upper, Rh | 1 |
218-6411 Window Gp-Cab -Side
| 21***11 | Window Group-Cab; -Side | 1 |
218-6745 Window Gp-Cab -Kit, Side
| 21***45 | Window Group-Cab; -Kit, Side | 1 |
Power Train
261-6245 Axle Gp
| 14***58 | Axle Group | 4 |
| 26***45 | Axle Group | 1 |
258-2759 Axle Gp
| 25***59 | Axle Group | 5 |
142-8758 Axle Gp
| 14***24 | Spindle-Wheel | 1 |
| 14***29 | Spacer; (50.8x63.5x32-mm Thk) | 1 |
| 14***58 | Axle Group | 1 |
261-6255 Axle Gp
| 09***91 | Bolt; (Locking) (M12x1.75x25mm) | 2 |
| 10***66 | Bolt; (Self Locking) (M16x2x40mm) | 4 |
| 14***32 | Sprocket; (12-Teeth)(Motor) | 4 |
142-8760 Drive Gp-Tandem
| 09***91 | Bolt; (Locking) (M12x1.75x25mm) | 2 |
| 10***66 | Bolt; (Self Locking) (M16x2x40mm) | 4 |
| 14***32 | Sprocket; (12-Teeth)(Motor) | 4 |
212-6692 Drive Gp-Tandem
| 14***15 | Connector As | 1 |
| 14***28 | Connector Assem. | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
218-6545 Filter & Lines Gp-Hydraulic
| 14***15 | Connector As | 1 |
| 14***28 | Connector Assem. | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
218-6624 Filter & Lines Gp-Hydraulic
| 13***04 | Switch As-Pressure; (Power Train Oil Filter Bypass) | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
| 21***24 | Filter & Lines Group-Hydraulic | 1 |
223-9974 Filter Gp-Oil -Hydraulic
| 14***41 | Hose As | 2 |
| 14***22 | Adapter; (-10orb/-12orfs) | 4 |
| 14***27 | Connector Group | 4 |
218-6089 Lines Gp-Hydrostatic
| 14***41 | Hose As | 2 |
| 14***22 | Adapter; (-10orb/-12orfs) | 4 |
| 14***27 | Connector Group | 4 |
218-6506 Lines Gp-Hydrostatic
| 14***41 | Hose As | 2 |
| 14***22 | Adapter; (-10orb/-12orfs) | 4 |
| 14***27 | Connector Group | 4 |
218-6235 Manifold & Lines Gp-Control -Parking Brake
| 10***30 | Hose Assem. | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 3 |
| 14***35 | Tee, -6 Orb / Orfs | 1 |
218-6536 Manifold & Lines Gp-Control -Parking Brake
| 10***30 | Hose Assem. | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 3 |
| 14***35 | Tee, -6 Orb / Orfs | 1 |
208-5681 Manifold & Solenoid Gp-Control -Parking Brake
| 09***68 | Bolt-Socket Head; (M5x0.8x8-mm) | 2 |
| 20***81 | Manifold & Solenoid Group-Control; -Parking Brake | 1 |
| 24***62 | Valve Group-Solenoid; (Parking Brake) | 1 |
259-8210 Manifold & Solenoid Gp-Control
| 10***93 | Poppet | 1 |
| 14***27 | Connector Group | 2 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
233-7131 Manifold & Solenoid Gp-Control -Parking Brake
| 09***68 | Bolt-Socket Head; (M5x0.8x8-mm) | 2 |
| 23***31 | Manifold & Solenoid Group-Control; -Parking Brake | 1 |
| 24***62 | Valve Group-Solenoid; (Parking Brake) | 1 |
218-5560 Manifold Gp-Return
| 10***93 | Poppet | 1 |
| 14***18 | Connector As | 1 |
| 14***27 | Connector Group | 2 |
308-0421 Manifold Gp-Return
| 20***43 | Bolt; (M12x1.75x42.5-mm) | 20 |
| 22***52 | Motor Group-Piston | 2 |
| 30***21 | Sealing Washer, Manifold Group-Return | 1 |
191-9650 Motor & Mtg Gp-Hydrostatic
| 03***53 | Seal-O-Ring; (08.92mm Id) | 1 |
| 14***90 | Ring-Split | 1 |
| 14***92 | Bearing | 1 |
220-8152 Motor Gp-Piston
| 03***53 | Seal-O-Ring; (08.92mm Id) | 1 |
| 09***17 | Seal-O-Ring (Id=13.80mm) | 1 |
| 14***90 | Ring-Split | 1 |
280-7854 Motor Gp-Piston -Hydrostatic
| 14***62 | Flange-Nylon | 1 |
| 14***19 | Plate-Adapter | 1 |
| 28***54 | Motor Group-Piston; -Hydrostatic | 1 |
228-1763 Mounting Gp-Pump
| 19***50 | Motor & Mtg Group-Hydrostatic | 1 |
| 21***92 | Drive Group-Tandem | 1 |
| 21***19 | Pump & Mtg Group-Hydrostatic | 1 |
218-6500 Power Train Ar
| 14***60 | Drive Group-Tandem | 1 |
| 19***50 | Motor & Mtg Group-Hydrostatic | 1 |
| 21***00 | Power Train Ar | 1 |
261-5750 Power Train Ar
| 19***50 | Motor & Mtg Group-Hydrostatic | 1 |
| 21***92 | Drive Group-Tandem | 1 |
| 26***60 | Pump & Mtg Group-Hydrostatic | 1 |
218-6200 Power Train Ar
| 14***60 | Drive Group-Tandem | 1 |
| 19***50 | Motor & Mtg Group-Hydrostatic | 1 |
| 21***19 | Pump & Mtg Group-Hydrostatic | 1 |
261-5751 Power Train Ar
| 09***94 | Ring-Retaining | 1 |
| 16***42 | Washer-Hard; (14.8x27x3-mm Thk) | 2 |
| 16***39 | Bolt; (M14x2x40-mm) | 2 |
261-5660 Pump & Mtg Gp-Hydrostatic
| 10***09 | Bearing | 2 |
| 10***65 | Circlip | 2 |
| 12***59 | Bearing-Roller | 2 |
218-5719 Pump & Mtg Gp-Hydrostatic
| 09***94 | Ring-Retaining | 1 |
| 16***42 | Washer-Hard; (14.8x27x3-mm Thk) | 2 |
| 16***39 | Bolt; (M14x2x40-mm) | 2 |
228-9216 Pump Gp-Piston
| 10***07 | Cradle-Bearing | 2 |
| 10***09 | Bearing | 2 |
| 10***65 | Circlip | 2 |
233-5649 Pump Gp-Piston -Hydrostatic
| 10***09 | Bearing | 2 |
| 10***65 | Circlip | 2 |
| 12***59 | Bearing-Roller | 2 |
289-6340 Pump Gp-Piston
| 10***09 | Bearing | 2 |
| 10***65 | Circlip | 2 |
| 11***19 | Ring-Backup | 4 |
289-6342 Pump Gp-Piston
| 10***09 | Bearing | 2 |
| 10***65 | Circlip | 2 |
| 11***19 | Ring-Backup | 4 |
307-3064 Pump Gp-Piston
| 14***85 | Wheel As | 1 |
| 14***86 | Tire; (10-16.5) | 1 |
| 15***99 | Valve As-Tire | 1 |
199-5391 Tire & Rim Gp
| 18***72 | Tire & Rim Group; -Lh | 1 |
| 18***73 | Tire & Rim Group; -Rh | 1 |
| 19***50 | Bracket Group-Mounting | 1 |
265-2899 Tire & Rim Gp -Rh
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 14***28 | Tire & Rim Group; -Lh | 2 |
| 14***37 | Tire & Rim Group; -Rh | 2 |
154-3979 Tire & Rim Gp -Rh
| 14***90 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 15***79 | Tire & Rim Group; -Rh | 1 |
199-5435 Tire & Rim Gp -Rh
| 15***99 | Valve As-Tire | 1 |
| 17***70 | Wheel As | 1 |
| 19***35 | Tire & Rim Group; -Rh | 1 |
185-8678 Tire & Rim Gp -Lh
| 14***85 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***78 | Tire & Rim Group; -Lh | 1 |
188-0125 Tire & Rim Gp -Rh
| 14***87 | Tire & Rim Group; -Lh | 1 |
| 15***93 | Tire & Rim Group; -Rh | 1 |
| 18***25 | Tire & Rim Group; -Rh | 1 |
238-7739 Tire & Rim Gp -Rh
| 14***90 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 22***62 | Tire; (10-16.5) | 1 |
238-7738 Tire & Rim Gp -Lh
| 14***81 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 23***38 | Tire & Rim Group; -Lh | 1 |
199-5394 Tire & Rim Gp
| 15***99 | Valve As-Tire | 1 |
| 17***70 | Wheel As | 1 |
| 19***94 | Tire & Rim Group | 1 |
199-5393 Tire & Rim Gp
| 18***26 | Tire & Rim Group; -Lh | 1 |
| 18***27 | Tire & Rim Group; -Rh | 1 |
| 19***50 | Bracket Group-Mounting | 1 |
142-7489 Tire & Rim Gp -Lh
| 14***88 | Tire; (10-16.5) | 1 |
| 14***89 | Tire & Rim Group; -Lh | 1 |
| 14***90 | Wheel As | 1 |
150-8591 Tire & Rim Gp -Rh
| 14***85 | Wheel As | 1 |
| 14***86 | Tire; (10-16.5) | 1 |
| 15***91 | Tire & Rim Group; -Rh | 1 |
188-0124 Tire & Rim Gp -Lh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***33 | Tire; (12-16.5) | 1 |
165-2610 Tire & Rim Gp -Rh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 16***10 | Tire & Rim Group; -Rh | 1 |
265-2897 Tire & Rim Gp -Rh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 22***63 | Tire; (12-16.5) | 1 |
199-5392 Tire & Rim Gp -Low Side Wall
| 18***78 | Tire & Rim Group; -Lh | 1 |
| 18***79 | Tire & Rim Group; -Rh | 1 |
| 19***50 | Bracket Group-Mounting | 1 |
150-8590 Tire & Rim Gp -Rh
| 14***88 | Tire; (10-16.5) | 1 |
| 14***90 | Wheel As | 1 |
| 15***90 | Tire & Rim Group; -Rh | 1 |
265-2894 Tire & Rim Gp -Lh
| 14***90 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 22***62 | Tire; (10-16.5) | 1 |
185-9927 Tire & Rim Gp -Rh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***27 | Tire & Rim Group; -Rh | 1 |
165-2605 Tire & Rim Gp -Lh
| 14***90 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 16***05 | Tire & Rim Group; -Lh | 1 |
165-2609 Tire & Rim Gp -Lh
| 14***85 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 16***09 | Tire & Rim Group; -Lh | 1 |
199-5438 Tire & Rim Gp -Lh
| 15***99 | Valve As-Tire | 1 |
| 17***70 | Wheel As | 1 |
| 19***38 | Tire & Rim Group; -Lh | 1 |
225-9271 Tire & Rim Gp
| 14***81 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 22***71 | Tire & Rim Group | 1 |
142-7487 Tire & Rim Gp -Lh
| 14***86 | Tire; (10-16.5) | 1 |
| 14***87 | Tire & Rim Group; -Lh | 1 |
| 14***90 | Wheel As | 1 |
199-5434 Tire & Rim Gp -Lh
| 15***99 | Valve As-Tire | 1 |
| 17***70 | Wheel As | 1 |
| 19***34 | Tire & Rim Group; -Lh | 1 |
225-9270 Tire & Rim Gp
| 14***85 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 22***67 | Tire; (10-16.5) | 1 |
185-8671 Tire & Rim Gp -Rh
| 15***99 | Valve As-Tire | 1 |
| 18***69 | Wheel As | 1 |
| 18***71 | Tire & Rim Group; -Rh | 1 |
185-8670 Tire & Rim Gp -Lh
| 15***99 | Valve As-Tire | 1 |
| 18***68 | Wheel As | 1 |
| 18***70 | Tire & Rim Group; -Lh | 1 |
265-2895 Tire & Rim Gp -Rh
| 14***85 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 22***62 | Tire; (10-16.5) | 1 |
142-7484 Tire & Rim Gp -Lh
| 14***84 | Tire & Rim Group; -Lh | 1 |
| 14***85 | Wheel As | 1 |
| 14***88 | Tire; (10-16.5) | 1 |
142-8728 Tire & Rim Gp -Lh
| 14***26 | Tire; (12-R16.5) | 1 |
| 14***28 | Tire & Rim Group; -Lh | 1 |
| 14***31 | Wheel As | 1 |
185-8676 Tire & Rim Gp -Lh
| 15***99 | Valve As-Tire | 1 |
| 18***76 | Tire & Rim Group; -Lh | 1 |
| 18***35 | Tire; (305-546) | 1 |
185-8677 Tire & Rim Gp -Rh
| 14***85 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***77 | Tire & Rim Group; -Rh | 1 |
165-4902 Tire & Rim Gp -Heavy-Duty, Rh
| 15***99 | Valve As-Tire | 1 |
| 16***02 | Tire & Rim Group; -Heavy-Duty, Rh | 1 |
| 18***68 | Wheel As | 1 |
185-8679 Tire & Rim Gp -Rh
| 14***90 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***79 | Tire & Rim Group; -Rh | 1 |
185-9926 Tire & Rim Gp -Lh
| 14***90 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***26 | Tire & Rim Group; -Lh | 1 |
150-8593 Tire & Rim Gp -Rh
| 14***31 | Wheel As | 1 |
| 15***93 | Tire & Rim Group; -Rh | 1 |
| 15***99 | Valve As-Tire | 1 |
154-3978 Tire & Rim Gp -Lh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 15***78 | Tire & Rim Group; -Lh | 1 |
185-8672 Tire & Rim Gp -Lh
| 15***99 | Valve As-Tire | 1 |
| 18***69 | Wheel As | 1 |
| 18***72 | Tire & Rim Group; -Lh | 1 |
265-2898 Tire & Rim Gp -Lh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 22***63 | Tire; (12-16.5) | 1 |
185-9930 Tire & Rim Gp -Lh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***30 | Tire & Rim Group; -Lh | 1 |
150-8592 Tire & Rim Gp -Rh
| 14***85 | Wheel As | 1 |
| 14***88 | Tire; (10-16.5) | 1 |
| 15***92 | Tire & Rim Group; -Rh | 1 |
185-9931 Tire & Rim Gp -Rh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 18***31 | Tire & Rim Group; -Rh | 1 |
199-5292 Tire & Rim Gp
| 18***70 | Tire & Rim Group; -Lh | 1 |
| 18***71 | Tire & Rim Group; -Rh | 1 |
| 19***50 | Bracket Group-Mounting | 1 |
199-5439 Tire & Rim Gp -Rh
| 14***90 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 19***39 | Tire & Rim Group; -Rh | 1 |
199-5291 Tire & Rim Gp
| 16***09 | Tire & Rim Group; -Lh | 1 |
| 16***10 | Tire & Rim Group; -Rh | 1 |
| 19***50 | Bracket Group-Mounting | 1 |
142-7491 Tire & Rim Gp -Lh
| 14***91 | Tire & Rim Group; -Lh | 1 |
| 14***26 | Tire; (12-R16.5) | 1 |
| 14***31 | Wheel As | 1 |
165-2606 Tire & Rim Gp -Rh
| 14***85 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 16***06 | Tire & Rim Group; -Rh | 1 |
165-4901 Tire & Rim Gp -Heavy-Duty, Lh
| 14***31 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 16***01 | Tire & Rim Group; -Heavy-Duty, Lh | 1 |
265-2896 Tire & Rim Gp -Lh
| 14***85 | Wheel As | 1 |
| 15***99 | Valve As-Tire | 1 |
| 22***62 | Tire; (10-16.5) | 1 |
185-8673 Tire & Rim Gp -Rh
| 15***99 | Valve As-Tire | 1 |
| 18***73 | Tire & Rim Group; -Rh | 1 |
| 18***35 | Tire; (305-546) | 1 |
142-8737 Tire & Rim Gp -Rh
| 14***86 | Tire; (10-16.5) | 1 |
| 14***90 | Wheel As | 1 |
| 14***37 | Tire & Rim Group; -Rh | 1 |
142-8649 Wheel & Tire Ar
| 14***84 | Tire & Rim Group; -Lh | 2 |
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 14***49 | Wheel & Tire Ar | 1 |
228-9215 Wheel & Tire Ar
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 22***15 | Wheel & Tire Ar | 1 |
| 23***38 | Tire & Rim Group; -Lh | 2 |
165-4898 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 16***98 | Wheel & Tire Ar; -Heavy Duty | 1 |
| 19***38 | Tire & Rim Group; -Lh | 2 |
185-8665 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***65 | Wheel & Tire Ar; -Heavy Duty | 1 |
| 18***30 | Tire & Rim Group; -Lh | 2 |
187-3239 Wheel & Tire Ar
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***39 | Wheel & Tire Ar | 1 |
| 22***70 | Tire & Rim Group | 4 |
185-8664 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***64 | Wheel & Tire Ar; -Heavy Duty | 1 |
| 18***26 | Tire & Rim Group; -Lh | 2 |
142-8648 Wheel & Tire Ar
| 14***89 | Tire & Rim Group; -Lh | 2 |
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 14***48 | Wheel & Tire Ar; -Heavy Duty | 1 |
238-7737 Wheel & Tire Ar
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 23***37 | Wheel & Tire Ar | 1 |
| 26***94 | Tire & Rim Group; -Lh | 2 |
228-9214 Wheel & Tire Ar
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 22***71 | Tire & Rim Group | 4 |
| 22***14 | Wheel & Tire Ar | 1 |
252-0344 Wheel & Tire Ar
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 25***44 | Wheel & Tire Ar | 1 |
| 26***96 | Tire & Rim Group; -Lh | 2 |
252-0367 Wheel & Tire Ar -Solid
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 22***36 | Tire-Solid; (31x6x10) | 2 |
| 22***37 | Tire-Solid; (31x6x10) | 2 |
165-4891 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 16***91 | Wheel & Tire Ar; -Heavy Duty | 1 |
| 16***01 | Tire & Rim Group; -Heavy-Duty, Lh | 2 |
252-0345 Wheel & Tire Ar
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 25***45 | Wheel & Tire Ar | 1 |
| 26***98 | Tire & Rim Group; -Lh | 2 |
185-8660 Wheel & Tire Ar -Low Side Wall
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***60 | Wheel & Tire Ar; -Low Side Wall | 1 |
| 18***72 | Tire & Rim Group; -Lh | 2 |
142-9121 Wheel & Tire Ar -High Flotation
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 14***21 | Wheel & Tire Ar; -High Flotation | 1 |
| 15***78 | Tire & Rim Group; -Lh | 2 |
178-2256 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 17***56 | Wheel & Tire Ar; -Heavy Duty | 1 |
| 18***70 | Tire & Rim Group; -Lh | 2 |
142-8666 Wheel & Tire Ar
| 14***87 | Tire & Rim Group; -Lh | 2 |
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 14***66 | Wheel & Tire Ar | 1 |
252-0378 Wheel & Tire Ar -Solid
| 21***47 | Spacer | 2 |
| 21***51 | Bumper As | 1 |
| 21***73 | Plate | 1 |
165-2602 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 16***02 | Wheel & Tire Ar; -Heavy Duty | 1 |
| 16***09 | Tire & Rim Group; -Lh | 2 |
252-0346 Wheel & Tire Ar
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 22***36 | Tire-Solid; (31x6x10) | 2 |
| 22***37 | Tire-Solid; (31x6x10) | 2 |
185-8667 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***67 | Wheel & Tire Ar; -Heavy Duty | 1 |
| 18***24 | Tire & Rim Group; -Lh | 2 |
142-7494 Wheel & Tire Ar -Pneumatic
| 14***91 | Tire & Rim Group; -Lh | 2 |
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 14***94 | Wheel & Tire Ar; -Pneumatic | 1 |
185-8661 Wheel & Tire Ar -Low Side Wall
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***61 | Wheel & Tire Ar; -Low Side Wall | 1 |
| 18***76 | Tire & Rim Group; -Lh | 2 |
185-8663 Wheel & Tire Ar -Low Side Wall
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 18***63 | Wheel & Tire Ar; -Low Side Wall | 1 |
| 18***78 | Tire & Rim Group; -Lh | 2 |
142-8667 Wheel & Tire Ar
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 14***67 | Wheel & Tire Ar; -Heavy Duty | 1 |
| 19***34 | Tire & Rim Group; -Lh | 2 |
159-5761 Wheel & Tire Ar -Solid
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 15***61 | Wheel & Tire Ar; -Solid | 1 |
| 16***05 | Tire & Rim Group; -Lh | 2 |
154-3972 Wheel & Tire Ar -Heavy Duty
| 14***93 | Nut-Lug; (9/16-18-2b-Thd) | 32 |
| 15***72 | Wheel & Tire Ar; -Heavy Duty | 1 |
| 18***30 | Tire-Solid; (33x6x8) | 4 |
Service Equipment And Supplies
193-0450 Bracket Gp-Mounting
| 19***50 | Bracket Group-Mounting | 1 |
191-9684 Film Gp -Clearance
| 19***84 | Film Group; -Clearance | 1 |
218-6732 Film Gp -Kit
| 21***32 | Film Group; -Kit | 1 |
295-7144 Film Gp
| 29***44 | Film Group | 1 |
218-6731 Film Gp -Kit
| 21***31 | Film Group; -Kit | 1 |
218-6218 Film Gp
| 21***18 | Film Group | 1 |
238-7734 Film Gp -Un
| 23***34 | Film Group; -Un | 1 |
218-6734 Film Gp -Kit
| 21***34 | Film Group; -Kit | 1 |
218-6177 Film Gp
| 21***77 | Film Group | 1 |
218-6178 Film Gp
| 21***78 | Film Group | 1 |
218-6217 Film Gp
| 21***17 | Film Group | 1 |
218-6735 Film Gp -Kit
| 21***35 | Film Group; -Kit | 1 |
295-7143 Film Gp
| 29***43 | Film Group | 1 |
195-6740 Plate & Film Gp
| 19***40 | Plate & Film Group | 1 |
218-6291 Plate & Film Gp
| 21***91 | Plate & Film Group | 1 |
218-5911 Plate & Film Gp
| 21***11 | Plate & Film Group | 1 |
218-6292 Plate & Film Gp
| 21***92 | Plate & Film Group | 1 |
286-9251 Plate & Film Gp
| 28***51 | Plate & Film Group | 1 |
247-0678 Plate & Film Gp
| 24***78 | Plate & Film Group | 1 |
308-5206 Plate & Film Gp
| 30***06 | Plate & Film Group | 1 |
218-5951 Plate & Film Gp
| 21***51 | Plate & Film Group | 1 |
Work Tools
216-8756 Arm Gp-Material Handling
| 13***86 | Edge Group-Cutting | 1 |
| 17***81 | Blade Group-Angling | 1 |
| 17***83 | Spring Group-Blade | 1 |
177-1989 Blade Ar -Angling
| 14***41 | Edge Group-Cutting | 1 |
| 17***82 | Blade Group-Angling | 1 |
| 17***83 | Spring Group-Blade | 1 |
231-5277 Blade Ar -Angling
| 22***21 | Trunnion As | 1 |
| 22***79 | Plate As | 1 |
| 22***28 | Plate As | 1 |
177-1990 Blade Ar -Angling
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
231-5275 Blade Ar -Angling
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
222-7412 Blade As-Angling
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***40 | Pin | 2 |
| 16***19 | Pin As | 2 |
177-1987 Blade As-Angling
| 17***87 | Blade As-Angling | 1 |
| 22***21 | Trunnion As | 1 |
| 22***79 | Plate As | 1 |
177-1988 Blade As-Angling
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***40 | Pin | 2 |
| 16***19 | Pin As | 2 |
230-4596 Blade As-Angling
| 16***89 | Tack-Fastener | 4 |
| 22***12 | Blade As-Angling | 1 |
| 22***46 | Edge Group-Bit & Cutting | 1 |
231-5276 Blade Gp-Angling
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***80 | Blade Group-Multipurpose Bucket | 1 |
| 16***89 | Tack-Fastener | 4 |
177-1981 Blade Gp-Angling
| 16***89 | Tack-Fastener | 4 |
| 17***81 | Blade Group-Angling | 1 |
| 22***45 | Edge Group-Bit & Cutting | 1 |
177-1982 Blade Gp-Angling
| 15***77 | Edge | 1 |
| 17***82 | Blade Group-Angling | 1 |
222-7724 Blade Gp-Angling
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 22***24 | Blade Group-Angling | 1 |
325-7079 Blade Gp-Multipurpose Bucket
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 9 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
279-5388 Blade Gp-Multipurpose Bucket
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***88 | Blade Group-Multipurpose Bucket | 1 |
279-5406 Blade Gp-Multipurpose Bucket
325-7039 Blade Gp-Multipurpose Bucket
| 13***86 | Edge Group-Cutting | 1 |
| 28***89 | Bucket As-Dirt | 1 |
| 32***39 | Blade Group-Multipurpose Bucket | 1 |
154-5080 Blade Gp-Multipurpose Bucket
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***80 | Blade Group-Multipurpose Bucket | 1 |
| 16***89 | Tack-Fastener | 4 |
325-7069 Blade Gp-Multipurpose Bucket
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
325-7048 Blade Gp-Multipurpose Bucket
| 13***84 | Edge Group-Cutting | 1 |
| 27***64 | Bucket As-General Purpose | 1 |
| 32***48 | Blade Group-Multipurpose Bucket | 1 |
325-7059 Blade Gp-Multipurpose Bucket
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
159-5347 Blade Gp-Multipurpose Bucket
| 15***59 | Edge | 1 |
| 15***47 | Blade Group-Multipurpose Bucket | 1 |
325-7058 Blade Gp-Multipurpose Bucket
| 13***85 | Edge Group-Cutting | 1 |
| 27***68 | Bucket As-General Purpose | 1 |
| 32***58 | Blade Group-Multipurpose Bucket | 1 |
279-5387 Blade Gp-Multipurpose Bucket
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***87 | Blade Group-Multipurpose Bucket | 1 |
325-7068 Blade Gp-Multipurpose Bucket
| 13***86 | Edge Group-Cutting | 1 |
| 27***72 | Bucket As-General Purpose | 1 |
| 32***68 | Blade Group-Multipurpose Bucket | 1 |
159-5345 Blade Gp-Multipurpose Bucket
| 15***37 | Edge | 1 |
| 15***45 | Blade Group-Multipurpose Bucket | 1 |
279-5385 Blade Gp-Multipurpose Bucket
| 15***77 | Edge | 1 |
| 27***85 | Blade Group-Multipurpose Bucket | 1 |
279-5395 Blade Gp-Multipurpose Bucket
| 19***16 | Edge | 1 |
| 27***95 | Blade Group-Multipurpose Bucket | 1 |
279-5384 Blade Gp-Multipurpose Bucket
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***84 | Blade Group-Multipurpose Bucket | 1 |
293-0142 Blade Gp-Multipurpose Bucket
| 13***84 | Edge Group-Cutting | 1 |
| 27***37 | Bucket As-Dirt | 1 |
| 29***42 | Blade Group-Multipurpose Bucket | 1 |
279-5396 Blade Gp-Multipurpose Bucket
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***96 | Blade Group-Multipurpose Bucket | 1 |
279-5405 Blade Gp-Multipurpose Bucket
| 13***87 | Edge Group-Cutting | 1 |
| 26***84 | Bucket Group-Dirt | 1 |
| 27***05 | Blade Group-Multipurpose Bucket | 1 |
325-7038 Blade Gp-Multipurpose Bucket
| 13***85 | Edge Group-Cutting | 1 |
| 27***40 | Bucket As-Dirt | 1 |
| 32***38 | Blade Group-Multipurpose Bucket, Protective Cover | 1 |
325-7049 Blade Gp-Multipurpose Bucket
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
325-7078 Blade Gp-Multipurpose Bucket
| 13***87 | Edge Group-Cutting | 1 |
| 27***76 | Bucket As-General Purpose | 1 |
| 32***78 | Blade Group-Multipurpose Bucket | 1 |
279-5438 Bucket Ar-Dirt
| 15***85 | Bucket Group-Grapple; -Industrial | 1 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 15***12 | Cylinder Group-Grapple | 2 |
279-5435 Bucket Ar-Dirt
| 15***84 | Bucket Group-Grapple; -Industrial | 1 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 15***12 | Cylinder Group-Grapple | 2 |
268-4083 Bucket Ar-Dirt
| 19***24 | Edge Group-Cutting | 1 |
| 26***83 | Bucket Ar-Dirt | 1 |
| 29***70 | Bucket As-General Purpose; -High Capacity | 1 |
279-5441 Bucket Ar-Dirt
| 15***86 | Bucket Group-Grapple; -Industrial | 1 |
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 15***12 | Cylinder Group-Grapple | 2 |
285-6090 Bucket Ar-Dirt
| 13***84 | Edge Group-Cutting | 1 |
| 15***23 | Bucket Ar-Grapple | 1 |
| 28***90 | Bucket Ar-Dirt, Turbocharger | 1 |
296-8192 Bucket Ar-General Purpose
| 28***02 | Bucket Group-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
| 29***92 | Bucket Ar-General Purpose | 1 |
279-5369 Bucket Ar-General Purpose
| 16***34 | Grapple & Cylinder Group-Utility | 1 |
| 16***77 | Bucket Group-Utility | 1 |
| 27***69 | Bucket Ar-General Purpose | 1 |
279-5377 Bucket Ar-General Purpose
| 13***87 | Edge Group-Cutting | 1 |
| 21***29 | Bucket Ar-Grapple | 1 |
| 27***77 | Bucket Ar-General Purpose | 1 |
279-5366 Bucket Ar-General Purpose
| 13***86 | Edge Group-Cutting | 1 |
| 15***25 | Bucket Ar-Grapple; -Industrial | 1 |
| 27***66 | Bucket Ar-General Purpose | 1 |
279-5373 Bucket Ar-General Purpose
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 15***12 | Cylinder Group-Grapple | 2 |
| 16***87 | Lines Group-Grapple; -Industrial | 1 |
279-5370 Bucket Ar-General Purpose
| 16***34 | Grapple & Cylinder Group-Utility | 1 |
| 16***78 | Bucket Group-Utility | 1 |
| 27***70 | Bucket Ar-General Purpose | 1 |
279-5378 Bucket Ar-General Purpose
| 27***78 | Bucket Ar-General Purpose | 1 |
| 28***99 | Bucket Group-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
279-5365 Bucket Ar-General Purpose
| 13***85 | Edge Group-Cutting | 1 |
| 15***24 | Bucket Ar-Grapple | 1 |
| 27***65 | Bucket Ar-General Purpose | 1 |
279-5374 Bucket Ar-General Purpose
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***87 | Lines Group-Grapple; -Industrial | 1 |
| 21***28 | Bucket Group-Grapple | 1 |
285-6093 Bucket Ar-Grapple
| 13***84 | Edge Group-Cutting | 1 |
| 15***04 | Bucket Ar-Multipurpose | 1 |
| 28***93 | Bucket Ar-Grapple | 1 |
157-7223 Bucket Ar-Grapple
| 15***23 | Bucket Ar-Grapple | 1 |
| 28***00 | Bucket Ar-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
165-8780 Bucket Ar-Grapple -Utility
| 16***80 | Bucket Ar-Grapple; -Utility | 1 |
| 29***23 | Bucket As-Light Material, Wheel Disc | 1 |
| 29***80 | Edge Group-Cutting | 1 |
217-6229 Bucket Ar-Grapple
| 15***07 | Bucket Group-Multipurpose | 1 |
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
158-6095 Bucket Ar-Grapple
| 13***87 | Edge Group-Cutting | 1 |
| 15***95 | Bucket Ar-Grapple; -Industrial | 1 |
| 27***24 | Bucket As-Light Material | 1 |
285-6104 Bucket Ar-Grapple
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 15***04 | Bucket Ar-Multipurpose | 1 |
286-9301 Bucket Ar-Grapple
| 14***99 | Tooth Group-Uni | 8 |
| 15***10 | Bucket Ar-Multipurpose | 1 |
| 28***01 | Bucket Ar-Grapple | 1 |
165-8779 Bucket Ar-Grapple
| 16***79 | Bucket Ar-Grapple | 1 |
| 19***24 | Edge Group-Cutting | 1 |
| 27***29 | Bucket As-Light Material | 1 |
157-7227 Bucket Ar-Grapple
| 13***86 | Edge Group-Cutting | 1 |
| 15***27 | Bucket Ar-Grapple; -Industrial | 1 |
| 27***21 | Bucket As-Light Material | 1 |
217-6230 Bucket Ar-Grapple
| 15***09 | Bucket Group-Multipurpose | 1 |
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
285-6112 Bucket Ar-Grapple
| 14***99 | Tooth Group-Uni | 8 |
| 15***08 | Bucket Ar-Multipurpose | 1 |
| 28***12 | Bucket Ar-Grapple | 1 |
157-7224 Bucket Ar-Grapple
| 15***24 | Bucket Ar-Grapple | 1 |
| 28***01 | Bucket Ar-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
285-6111 Bucket Ar-Grapple
| 13***85 | Edge Group-Cutting | 1 |
| 15***08 | Bucket Ar-Multipurpose | 1 |
| 28***11 | Bucket Ar-Grapple | 1 |
157-7225 Bucket Ar-Grapple -Industrial
| 15***25 | Bucket Ar-Grapple; -Industrial | 1 |
| 28***48 | Mounting Group-Cylinder; -Grapple Bucket | 1 |
| 28***51 | Plate & Film Group | 1 |
286-9300 Bucket Ar-Grapple
| 13***86 | Edge Group-Cutting | 1 |
| 15***10 | Bucket Ar-Multipurpose | 1 |
| 28***00 | Bucket Ar-Grapple | 1 |
157-7226 Bucket Ar-Grapple
| 15***26 | Bucket Ar-Grapple; -Industrial | 1 |
| 28***44 | Bucket Group-Grapple | 1 |
| 28***48 | Mounting Group-Cylinder; -Grapple Bucket | 1 |
279-5430 Bucket Ar-Light Material
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
| 16***36 | Cover Group-Lines | 1 |
296-7597 Bucket Ar-Light Material
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
| 16***36 | Cover Group-Lines | 1 |
279-5425 Bucket Ar-Light Material
| 13***84 | Edge Group-Cutting | 1 |
| 27***82 | Bucket Ar-Multipurpose | 1 |
| 27***25 | Bucket Ar-Light Material | 1 |
279-5420 Bucket Ar-Light Material
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
325-7035 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***36 | Bucket As-Dirt | 1 |
325-7056 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 32***56 | Bucket Ar-Multipurpose | 1 |
154-5047 Bucket Ar-Multipurpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 9 |
| 15***47 | Bucket Ar-Multipurpose | 1 |
279-5401 Bucket Ar-Multipurpose
| 14***37 | Edge | 1 |
| 27***01 | Bucket Ar-Multipurpose | 1 |
279-5400 Bucket Ar-Multipurpose
| 14***04 | Bucket As-Dirt | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
279-5392 Bucket Ar-Multipurpose
| 14***36 | Edge | 1 |
| 27***92 | Bucket Ar-Multipurpose | 1 |
279-5382 Bucket Ar-Multipurpose
| 13***84 | Edge Group-Cutting | 1 |
| 27***82 | Bucket Ar-Multipurpose | 1 |
| 28***96 | Bucket Group-Utility | 1 |
325-7036 Bucket Ar-Multipurpose
| 14***36 | Edge | 1 |
| 32***36 | Bucket Ar-Multipurpose, Protective Cover | 1 |
279-5390 Bucket Ar-Multipurpose
| 13***85 | Edge Group-Cutting | 1 |
| 27***90 | Bucket Ar-Multipurpose | 1 |
| 28***99 | Bucket Group-Utility | 1 |
154-5046 Bucket Ar-Multipurpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 15***46 | Bucket Ar-Multipurpose | 1 |
325-7076 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***71 | Bucket As-General Purpose | 1 |
154-5008 Bucket Ar-Multipurpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 8 |
| 15***08 | Bucket Ar-Multipurpose | 1 |
325-7080 Bucket Ar-Multipurpose
| 19***22 | Edge | 1 |
| 32***80 | Bucket Ar-Multipurpose | 1 |
279-5399 Bucket Ar-Multipurpose
| 15***27 | Bucket As-Dirt | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
325-7045 Bucket Ar-Multipurpose
| 14***37 | Edge | 1 |
| 32***45 | Bucket Ar-Multipurpose | 1 |
325-7066 Bucket Ar-Multipurpose
| 14***36 | Edge | 1 |
| 32***66 | Bucket Ar-Multipurpose | 1 |
296-8055 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***33 | Bucket As-Dirt | 1 |
296-8057 Bucket Ar-Multipurpose
| 14***35 | Edge | 1 |
| 29***57 | Bucket Ar-Multipurpose | 1 |
154-5050 Bucket Ar-Multipurpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
| 15***50 | Bucket Ar-Multipurpose | 1 |
325-7046 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 28***88 | Bucket As-Dirt | 1 |
325-7055 Bucket Ar-Multipurpose
| 14***36 | Edge | 1 |
| 32***55 | Bucket Ar-Multipurpose | 1 |
293-0139 Bucket Ar-Multipurpose
| 14***34 | Edge | 1 |
| 29***39 | Engine; - Assembly, Bucket Ar-Multipurpose | 1 |
325-7075 Bucket Ar-Multipurpose
| 14***37 | Edge | 1 |
| 32***75 | Bucket Ar-Multipurpose | 1 |
154-5049 Bucket Ar-Multipurpose
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
| 15***49 | Bucket Ar-Multipurpose | 1 |
279-5402 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 18***16 | Bucket As-Dirt | 1 |
325-7065 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***63 | Bucket As-General Purpose | 1 |
279-5398 Bucket Ar-Multipurpose
| 14***35 | Edge | 1 |
| 27***98 | Bucket Ar-Multipurpose | 1 |
154-5004 Bucket Ar-Multipurpose
| 13***85 | Edge Group-Cutting | 1 |
| 15***04 | Bucket Ar-Multipurpose | 1 |
| 27***90 | Bucket Ar-Multipurpose | 1 |
279-5403 Bucket Ar-Multipurpose
| 19***22 | Edge | 1 |
| 27***03 | Bucket Ar-Multipurpose | 1 |
325-7060 Bucket Ar-Multipurpose
| 14***35 | Edge | 1 |
| 32***60 | Bucket Ar-Multipurpose | 1 |
279-5380 Bucket Ar-Multipurpose
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 9 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
279-5381 Bucket Ar-Multipurpose
| 19***24 | Edge Group-Cutting | 1 |
| 27***81 | Bucket Ar-Multipurpose | 1 |
| 29***39 | Engine; - Assembly, Bucket Ar-Multipurpose | 1 |
325-7050 Bucket Ar-Multipurpose
| 14***35 | Edge | 1 |
| 32***50 | Bucket Ar-Multipurpose | 1 |
279-5391 Bucket Ar-Multipurpose
| 13***86 | Edge Group-Cutting | 1 |
| 27***91 | Bucket Ar-Multipurpose | 1 |
| 28***02 | Bucket Group-Utility | 1 |
154-5010 Bucket Ar-Multipurpose
| 15***10 | Bucket Ar-Multipurpose | 1 |
| 15***11 | Mounting Group-Cylinder | 1 |
| 15***18 | Cylinder Group-Bucket | 2 |
325-7040 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***39 | Bucket As-Dirt | 1 |
154-5048 Bucket Ar-Multipurpose
| 13***87 | Edge Group-Cutting | 1 |
| 15***48 | Bucket Ar-Multipurpose | 1 |
| 27***03 | Bucket Ar-Multipurpose | 1 |
154-5045 Bucket Ar-Multipurpose
| 13***86 | Edge Group-Cutting | 1 |
| 15***45 | Bucket Ar-Multipurpose | 1 |
| 27***98 | Bucket Ar-Multipurpose | 1 |
325-7070 Bucket Ar-Multipurpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***67 | Bucket As-General Purpose | 1 |
285-6100 Bucket Ar-Utility
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 28***00 | Bucket Ar-Utility | 1 |
285-6101 Bucket Ar-Utility
| 22***32 | Edge | 1 |
| 28***01 | Bucket Ar-Utility | 1 |
285-6095 Bucket Ar-Utility
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***75 | Bucket As-General Purpose | 1 |
279-5439 Bucket As-Dirt
| 19***22 | Edge | 1 |
| 27***39 | Bucket As-Dirt | 1 |
279-5434 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***34 | Bucket As-Dirt | 1 |
268-4089 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 21***26 | Bucket As-Grapple | 1 |
279-5436 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***22 | Bucket As-Light Material | 1 |
285-6088 Bucket As-Dirt
| 22***82 | Edge | 1 |
| 28***88 | Bucket As-Dirt | 1 |
165-6157 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***88 | Bucket As-Grapple | 1 |
| 16***57 | Bucket As-Dirt | 1 |
152-0227 Bucket As-Dirt
| 14***36 | Edge | 1 |
| 15***27 | Bucket As-Dirt | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
285-6089 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***28 | Bucket As-Light Material | 1 |
279-5440 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***23 | Bucket As-Light Material | 1 |
165-6155 Bucket As-Dirt -0.30 Cu M
| 14***37 | Edge | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
| 16***55 | Bucket As-Dirt; -0.30 Cu M | 1 |
188-2716 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***89 | Bucket As-Grapple | 1 |
| 16***89 | Tack-Fastener | 4 |
141-6704 Bucket As-Dirt
| 14***04 | Bucket As-Dirt | 1 |
| 14***35 | Edge | 1 |
| 16***30 | Plate-Identification; (Cat) | 2 |
165-6156 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 15***87 | Bucket As-Grapple; -Industrial | 1 |
| 16***56 | Bucket As-Dirt | 1 |
188-3526 Bucket As-Dirt
| 16***30 | Plate-Identification; (Cat) | 2 |
| 18***26 | Bucket As-Dirt | 1 |
| 19***22 | Edge | 1 |
279-5433 Bucket As-Dirt
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 27***33 | Bucket As-Dirt | 1 |
279-5437 Bucket As-Dirt
| 14***37 | Edge | 1 |
| 27***37 | Bucket As-Dirt | 1 |
165-6152 Bucket As-General Purpose
| 16***52 | Bucket As-General Purpose; -0.36 Cu M | 1 |
| 29***57 | Edge | 1 |
279-5364 Bucket As-General Purpose
| 14***37 | Edge | 1 |
| 27***64 | Bucket As-General Purpose | 1 |
279-5372 Bucket As-General Purpose
| 13***86 | Edge Group-Cutting | 1 |
| 18***26 | Bucket As-Dirt | 1 |
| 27***72 | Bucket As-General Purpose | 1 |
292-9270 Bucket As-General Purpose -High Capacity
| 13***84 | Edge Group-Cutting | 1 |
| 16***52 | Bucket As-General Purpose; -0.36 Cu M | 1 |
| 29***70 | Bucket As-General Purpose; -High Capacity | 1 |
279-5368 Bucket As-General Purpose
| 13***84 | Edge Group-Cutting | 1 |
| 16***56 | Bucket As-Dirt | 1 |
| 27***68 | Bucket As-General Purpose | 1 |
279-5363 Bucket As-General Purpose
| 14***36 | Edge | 1 |
| 27***63 | Bucket As-General Purpose | 1 |
279-5371 Bucket As-General Purpose
| 13***85 | Edge Group-Cutting | 1 |
| 16***57 | Bucket As-Dirt | 1 |
| 27***71 | Bucket As-General Purpose | 1 |
165-6153 Bucket As-General Purpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***53 | Bucket As-General Purpose | 1 |
| 16***33 | Bucket As-Utility | 1 |
165-6154 Bucket As-General Purpose
| 14***35 | Edge | 1 |
| 16***54 | Bucket As-General Purpose | 1 |
292-9271 Bucket As-General Purpose
| 14***99 | Tooth Group-Uni | 8 |
| 16***53 | Bucket As-General Purpose | 1 |
| 29***71 | Bucket As-General Purpose, Cap | 1 |
279-5375 Bucket As-General Purpose
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 26***89 | Bucket As-Dirt | 1 |
279-5376 Bucket As-General Purpose
| 14***99 | Tooth Group-Uni | 8 |
| 16***52 | Bucket As-General Purpose; -0.36 Cu M | 1 |
| 27***76 | Bucket As-General Purpose | 1 |
141-6705 Bucket As-General Purpose
| 14***05 | Bucket As-General Purpose | 1 |
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
279-5367 Bucket As-General Purpose
| 13***83 | Edge Group-Cutting | 1 |
| 13***93 | Edge-Cutting | 0 |
| 14***34 | Edge | 1 |
169-8941 Bucket As-Grapple
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 14***99 | Tooth Group-Uni | 9 |
| 16***41 | Bucket As-Grapple; -Industrial | 1 |
156-0888 Bucket As-Grapple
| 14***99 | Tooth Group-Uni | 8 |
| 15***88 | Bucket As-Grapple | 1 |
| 16***54 | Bucket As-General Purpose | 1 |
169-8942 Bucket As-Grapple
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***41 | Bucket As-Grapple; -Industrial | 1 |
156-0887 Bucket As-Grapple
| 13***85 | Edge Group-Cutting | 1 |
| 15***87 | Bucket As-Grapple; -Industrial | 1 |
| 16***53 | Bucket As-General Purpose | 1 |
156-0889 Bucket As-Grapple
| 13***86 | Edge Group-Cutting | 1 |
| 15***89 | Bucket As-Grapple | 1 |
| 16***54 | Bucket As-General Purpose | 1 |
217-6227 Bucket As-Grapple
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 21***27 | Bucket As-Grapple | 2 |
169-8943 Bucket As-Grapple
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***42 | Bucket As-Grapple; -Industrial | 1 |
217-6226 Bucket As-Grapple
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***43 | Bucket As-Grapple | 1 |
279-5423 Bucket As-Light Material
| 14***05 | Bearing-Sleeve | 4 |
| 14***36 | Edge | 1 |
| 15***12 | Pin | 1 |
292-9224 Bucket As-Light Material
| 15***12 | Pin | 2 |
| 19***08 | Clam As-Multipurpose Bucket | 1 |
| 27***05 | Blade Group-Multipurpose Bucket | 1 |
164-7416 Bucket As-Light Material
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***16 | Bucket As-Light Material | 1 |
279-5428 Bucket As-Light Material
| 14***32 | Clam As-Multipurpose Bucket | 1 |
| 15***12 | Pin | 2 |
| 27***84 | Blade Group-Multipurpose Bucket | 1 |
164-7417 Bucket As-Light Material
| 13***86 | Edge Group-Cutting | 1 |
| 16***14 | Bucket As-Light Material | 1 |
| 16***17 | Bucket As-Light Material | 1 |
279-5424 Bucket As-Light Material
| 15***12 | Pin | 2 |
| 15***70 | Clam As-Multipurpose Bucket | 1 |
| 15***47 | Blade Group-Multipurpose Bucket | 1 |
164-7414 Bucket As-Light Material
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***14 | Bucket As-Light Material | 1 |
279-5421 Bucket As-Light Material
| 13***87 | Edge Group-Cutting | 1 |
| 16***15 | Bucket As-Light Material | 1 |
| 27***21 | Bucket As-Light Material | 1 |
279-5429 Bucket As-Light Material
| 15***12 | Pin | 2 |
| 15***53 | Clam As-Multipurpose Bucket | 1 |
| 27***88 | Blade Group-Multipurpose Bucket | 1 |
279-5422 Bucket As-Light Material
| 14***32 | Clam As-Multipurpose Bucket | 1 |
| 15***12 | Pin | 2 |
| 15***45 | Blade Group-Multipurpose Bucket | 1 |
292-9223 Bucket As-Light Material
| 15***12 | Pin | 2 |
| 15***70 | Clam As-Multipurpose Bucket | 1 |
| 27***96 | Blade Group-Multipurpose Bucket | 1 |
164-7415 Bucket As-Light Material
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***15 | Bucket As-Light Material | 1 |
165-8835 Bucket As-Utility
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***35 | Bucket As-Utility | 1 |
| 16***89 | Tack-Fastener | 4 |
285-6098 Bucket As-Utility
| 14***11 | Carriage As-Fork | 1 |
| 15***35 | Plate-Instruction; (Load Capacity) | 1 |
| 16***89 | Tack-Fastener | 4 |
285-6097 Bucket As-Utility
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Tack-Fastener | 4 |
| 28***97 | Bucket As-Utility | 1 |
165-8746 Bucket As-Utility
| 15***12 | Pin | 2 |
| 16***46 | Bucket As-Utility | 1 |
| 29***42 | Blade Group-Multipurpose Bucket | 1 |
165-8833 Bucket As-Utility
| 11***83 | Boss; (M10x1.5-Thd) | 1 |
| 13***84 | Edge Group-Cutting | 1 |
| 13***94 | Edge-Cutting | 1 |
165-8832 Bucket As-Utility
| 13***86 | Edge Group-Cutting | 1 |
| 16***47 | Bucket As-Utility | 1 |
| 16***32 | Bucket As-Utility | 1 |
165-8747 Bucket As-Utility
| 11***83 | Boss; (M10x1.5-Thd) | 4 |
| 13***85 | Edge Group-Cutting | 1 |
| 13***95 | Edge-Cutting | 1 |
165-8837 Bucket As-Utility
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***37 | Bucket As-Utility | 1 |
| 16***89 | Tack-Fastener | 4 |
285-6103 Bucket As-Utility
| 14***11 | Carriage As-Fork | 1 |
| 15***35 | Plate-Instruction; (Load Capacity) | 1 |
| 16***89 | Tack-Fastener | 4 |
268-4084 Bucket Gp-Dirt
| 26***84 | Bucket Group-Dirt | 1 |
| 35***71 | Carriage Group-Fork | 6 |
188-2719 Bucket Gp-Dirt
| 18***19 | Bucket Group-Dirt | 1 |
| 19***45 | Fork Group-Pallet | 2 |
| 26***81 | Carriage Group-Fork | 1 |
152-0231 Bucket Gp-Dirt
| 15***31 | Bucket Group-Dirt | 1 |
| 19***43 | Fork Group-Pallet | 2 |
| 26***81 | Carriage Group-Fork | 1 |
152-0232 Bucket Gp-Dirt
| 15***32 | Bucket Group-Dirt | 1 |
| 19***42 | Fork Group-Pallet | 2 |
| 26***81 | Carriage Group-Fork | 1 |
152-0230 Bucket Gp-Dirt
| 14***11 | Carriage As-Fork | 1 |
| 15***30 | Bucket Group-Dirt | 1 |
| 15***35 | Plate-Instruction; (Load Capacity) | 1 |
296-8191 Bucket Gp-General Purpose
| 14***05 | Bearing-Sleeve | 4 |
| 14***35 | Edge | 1 |
| 15***38 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
152-0223 Bucket Gp-General Purpose
| 15***23 | Bucket Group-General Purpose | 1 |
| 19***43 | Fork Group-Pallet | 2 |
| 35***71 | Carriage Group-Fork | 1 |
152-0225 Bucket Gp-General Purpose
| 15***25 | Bucket Group-General Purpose | 1 |
| 19***45 | Fork Group-Pallet | 2 |
| 35***71 | Carriage Group-Fork | 1 |
152-0226 Bucket Gp-General Purpose
| 15***26 | Bucket Group-General Purpose | 1 |
| 15***35 | Plate-Instruction; (Load Capacity) | 1 |
| 16***89 | Tack-Fastener | 4 |
152-0224 Bucket Gp-General Purpose
| 15***24 | Bucket Group-General Purpose | 1 |
| 19***42 | Fork Group-Pallet | 2 |
| 35***71 | Carriage Group-Fork | 1 |
152-0228 Bucket Gp-General Purpose
| 15***28 | Bucket Group-General Purpose | 1 |
| 26***81 | Carriage Group-Fork | 6 |
152-0229 Bucket Gp-General Purpose
| 15***29 | Bucket Group-General Purpose | 1 |
| 15***35 | Plate-Instruction; (Load Capacity) | 1 |
| 16***89 | Tack-Fastener | 4 |
286-9244 Bucket Gp-Grapple
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
156-0886 Bucket Gp-Grapple
| 14***05 | Bearing-Sleeve | 4 |
| 15***86 | Bucket Group-Grapple; -Industrial | 1 |
| 15***38 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
156-0885 Bucket Gp-Grapple
| 14***05 | Bearing-Sleeve | 4 |
| 14***37 | Edge | 1 |
| 15***85 | Bucket Group-Grapple; -Industrial | 1 |
156-0884 Bucket Gp-Grapple
| 14***05 | Bearing-Sleeve | 4 |
| 14***36 | Edge | 1 |
| 15***84 | Bucket Group-Grapple; -Industrial | 1 |
279-5359 Bucket Gp-Grapple -Industrial
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 12***75 | Tube-Heat Shrink; (7.44-mm Dia)(560-cm) | 0 |
217-6228 Bucket Gp-Grapple
| 14***05 | Bearing-Sleeve | 4 |
| 16***30 | Plate-Identification; (Cat) | 2 |
| 21***28 | Bucket Group-Grapple | 1 |
286-9278 Bucket Gp-Grapple
| 20***20 | Coupler Group-Quick; -Mechanical | 1 |
| 21***11 | Lines Group-Lowering Control; -Manual | 1 |
| 28***78 | Bucket Group-Grapple | 1 |
164-7412 Bucket Gp-Light Material
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 16***12 | Bucket Group-Light Material | 1 |
| 20***21 | Coupler Group-Quick; -Hydraulic | 1 |
164-7413 Bucket Gp-Light Material
| 16***13 | Bucket Group-Light Material | 1 |
| 20***20 | Coupler Group-Quick; -Mechanical | 1 |
| 21***82 | Lines Group-Lowering Control; -Manual | 1 |
325-7047 Bucket Gp-Multipurpose
| 13***94 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 8 |
| 32***47 | Bucket Group-Multipurpose | 1 |
325-7067 Bucket Gp-Multipurpose
| 13***96 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 11 |
| 32***67 | Bucket Group-Multipurpose | 1 |
154-5007 Bucket Gp-Multipurpose
| 12***01 | Plate-Retainer | 2 |
| 13***79 | Washer; (11x32x3-mm Thk) | 2 |
| 13***51 | Spacer; (11x19x6-mm Thk) | 2 |
279-5397 Bucket Gp-Multipurpose
| 19***40 | Cylinder Group-Hydraulic; -Coupler | 1 |
| 19***42 | Pin | 1 |
| 21***57 | Link Group-Coupler | 1 |
154-5005 Bucket Gp-Multipurpose
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 15***05 | Bucket Group-Multipurpose | 1 |
| 20***21 | Coupler Group-Quick; -Hydraulic | 1 |
154-5009 Bucket Gp-Multipurpose
| 12***01 | Plate-Retainer | 2 |
| 15***09 | Bucket Group-Multipurpose | 1 |
| 20***85 | Pin | 2 |
293-0141 Bucket Gp-Multipurpose
| 14***88 | Edge-Cutting | 1 |
| 29***41 | Bucket Group-Multipurpose | 1 |
| 3F***08 | Bolt-Plow; (5/8-11x2.25-In) | 13 |
325-7077 Bucket Gp-Multipurpose
| 13***97 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 11 |
| 32***77 | Bucket Group-Multipurpose | 1 |
279-5383 Bucket Gp-Multipurpose
| 16***28 | Plate | 1 |
| 27***83 | Bucket Group-Multipurpose | 1 |
| 5C***53 | Bolt (M6x1.00x16mm); (M6x1x16mm Thk) | 5 |
279-5389 Bucket Gp-Multipurpose
| 19***40 | Cylinder Group-Hydraulic; -Coupler | 1 |
| 19***42 | Pin | 1 |
| 21***57 | Link Group-Coupler | 1 |
325-7037 Bucket Gp-Multipurpose
| 13***93 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 6 |
| 32***37 | Bucket Group-Multipurpose | 1 |
279-5404 Bucket Gp-Multipurpose
| 14***14 | Edge-Cutting | 1 |
| 27***04 | Bucket Group-Multipurpose | 1 |
| 3F***08 | Bolt-Plow; (5/8-11x2.25-In) | 10 |
325-7057 Bucket Gp-Multipurpose
| 13***95 | Edge-Cutting | 1 |
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 8 |
| 32***57 | Bucket Group-Multipurpose | 1 |
165-8778 Bucket Gp-Utility
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 11 |
| 16***78 | Bucket Group-Utility | 1 |
| 19***24 | Edge-Cutting | 1 |
165-8777 Bucket Gp-Utility
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 7 |
| 16***77 | Bucket Group-Utility | 1 |
| 19***24 | Edge-Cutting | 1 |
165-8836 Bucket Gp-Utility
| 15***53 | Screw-Flat Head; (M16x2.00 Thd) | 13 |
| 16***36 | Bucket Group-Utility | 1 |
| 29***02 | Edge-Cutting | 1 |
285-6099 Bucket Gp-Utility
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 15***12 | Cylinder Group-Grapple | 2 |
| 16***87 | Lines Group-Grapple; -Industrial | 1 |
285-6102 Bucket Gp-Utility
| 16***34 | Grapple & Cylinder Group-Utility | 1 |
| 25***25 | Fork Group-Utility | 1 |
| 28***02 | Bucket Group-Utility | 1 |
285-6096 Bucket Gp-Utility
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 15***12 | Cylinder Group-Grapple | 2 |
| 16***87 | Lines Group-Grapple; -Industrial | 1 |
242-9999 Carriage & Fork Ar
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***14 | Fork Group-Grapple; -Industrial | 9 |
| 24***99 | Carriage & Fork Ar | 1 |
353-1697 Carriage & Fork Ar
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 9 |
| 35***97 | Carriage & Fork Ar | 1 |
353-1694 Carriage & Fork Ar
| 16***54 | Tine | 1 |
| 35***94 | Carriage & Fork Ar | 1 |
| 3E***70 | Pin; (Spring) | 1 |
293-9428 Carriage & Fork Ar
| 28***10 | Fork Group-Grapple | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
| 29***28 | Carriage & Fork Ar | 1 |
293-9427 Carriage & Fork Ar
| 28***05 | Fork Group-Utility | 1 |
| 28***16 | Grapple & Cylinder Group-Utility | 1 |
| 29***27 | Carriage & Fork Ar | 1 |
243-0000 Carriage & Fork Ar
| 15***91 | Mounting Group-Cylinder; -Industrial | 1 |
| 16***14 | Fork Group-Grapple; -Industrial | 2 |
| 24***00 | Carriage & Fork Ar | 1 |
293-9429 Carriage & Fork Ar
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
353-1693 Carriage & Fork Ar
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
353-1696 Carriage & Fork Ar
| 15***40 | Pin | 4 |
| 15***48 | Bearing-Sleeve | 2 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
242-9998 Carriage & Fork Ar
| 16***34 | Grapple & Cylinder Group-Utility | 1 |
| 24***98 | Carriage & Fork Ar | 1 |
| 25***26 | Fork Group-Utility | 1 |
149-1411 Carriage As-Fork
| 14***11 | Carriage As-Fork | 1 |
| 22***29 | Positioner Group-Fork | 1 |
351-9371 Carriage Gp-Fork
| 19***43 | Fork Group-Pallet | 12 |
| 22***29 | Positioner Group-Fork | 1 |
| 35***71 | Carriage Group-Fork | 1 |
293-9426 Carriage Gp-Fork
| 22***29 | Positioner Group-Fork | 1 |
| 29***26 | Carriage Group-Fork | 1 |
261-6681 Carriage Gp-Fork
| 22***29 | Positioner Group-Fork | 1 |
| 26***81 | Carriage Group-Fork | 1 |
149-4232 Clam As-Multipurpose Bucket
| 14***32 | Clam As-Multipurpose Bucket | 1 |
| 19***42 | Fork Group-Pallet | 12 |
| 22***29 | Positioner Group-Fork | 1 |
293-0148 Clam As-Multipurpose Bucket
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 9 |
| 16***39 | Fork Group-Utility | 1 |
154-5053 Clam As-Multipurpose Bucket
| 15***53 | Clam As-Multipurpose Bucket | 1 |
| 19***45 | Fork Group-Pallet | 12 |
| 22***29 | Positioner Group-Fork | 1 |
154-5070 Clam As-Multipurpose Bucket
| 15***70 | Clam As-Multipurpose Bucket | 1 |
| 16***41 | Tine | 1 |
| 9R***59 | Clip | 1 |
199-8308 Clam As-Multipurpose Bucket
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 7 |
| 16***38 | Fork Group-Utility | 1 |
241-8672 Conversion Gp-Work Tool -Kit, High Flow
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***44 | Fork As; (Utility) | 1 |
296-0582 Conversion Gp-Work Tool -Kit, High Flow
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***45 | Fork As; (Utility) | 1 |
218-6322 Coupler Ar-Quick -Hydraulic
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 9 |
| 21***22 | Coupler Ar-Quick; -Hydraulic | 1 |
218-6722 Coupler Ar-Quick -Hydraulic
| 17***14 | Pin As | 1 |
| 17***55 | Shim; (1-mm Thk) | 1 |
| 17***56 | Shim; (2-mm Thk) | 1 |
218-6321 Coupler Ar-Quick -Manual
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 7 |
| 21***21 | Coupler Ar-Quick; -Manual | 1 |
218-6721 Coupler Ar-Quick -Manual
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***32 | Fork Group-Utility | 7 |
| 21***21 | Coupler Ar-Quick; -Manual | 1 |
206-3821 Coupler Gp-Quick -Hydraulic
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***89 | Tack-Fastener | 4 |
206-3820 Coupler Gp-Quick -Mechanical
| 15***04 | Plate-Instruction; (Bucket Specifications) | 1 |
| 16***89 | Film-Warning; (Impaled Point) | 2 |
| 16***89 | Tack-Fastener | 4 |
162-5236 Cover Gp-Lines
| 16***36 | Cover Group-Lines | 1 |
| 16***95 | Cylinder Group-Grapple | 1 |
| 16***31 | Mounting Group-Cylinder; -Utility | 1 |
215-3962 Cylinder & Link Gp-Coupler -Lh
| 16***95 | Cylinder Group-Grapple | 1 |
| 16***31 | Mounting Group-Cylinder; -Utility | 1 |
| 16***40 | Grapple Group-Utility | 1 |
215-3963 Cylinder & Link Gp-Coupler -Rh
| 15***11 | Pin | 4 |
| 15***35 | Film-Warning; (Crush Hazard, Stay Back) | 2 |
| 16***43 | Arm As | 1 |
222-7545 Edge Gp-Bit & Cutting
| 16***60 | Pin-Spring | 1 |
| 19***42 | Pin | 1 |
| 21***58 | Handle Group-Coupler; -Lh | 1 |
222-7546 Edge Gp-Bit & Cutting
| 16***60 | Pin-Spring | 1 |
| 19***42 | Pin | 1 |
| 21***59 | Handle Group-Coupler; -Rh | 1 |
195-7124 Edge Gp-Cutting
| 17***47 | Pin | 1 |
| 19***24 | Edge Group-Cutting | 1 |
| 9R***01 | Pin-Cotter | 1 |
135-9385 Edge Gp-Cutting
| 03***57 | Washer; (13x26x6-mm Thk) | 2 |
| 13***85 | Edge Group-Cutting | 1 |
| 17***53 | Plate | 2 |
135-9383 Edge Gp-Cutting
| 13***83 | Edge Group-Cutting | 1 |
| 19***37 | Plate | 1 |
| 19***54 | Pin-Spring | 2 |
149-5741 Edge Gp-Cutting
| 14***41 | Edge Group-Cutting | 1 |
| 19***37 | Plate | 1 |
| 19***38 | Bracket | 1 |
135-9386 Edge Gp-Cutting
| 03***57 | Washer; (13x26x6-mm Thk) | 4 |
| 13***86 | Edge Group-Cutting | 1 |
| 17***14 | Film-Stripe; (Reflective, Red, White) | 1 |
296-7680 Edge Gp-Cutting
| 17***14 | Film-Stripe; (Reflective, Red, White) | 1 |
| 17***15 | Film; (Reflective)(Warning) | 1 |
| 17***50 | Plate As; (Lh) | 1 |
135-9387 Edge Gp-Cutting
| 13***87 | Edge Group-Cutting | 1 |
| 19***37 | Plate | 1 |
| 19***38 | Bracket | 1 |
135-9384 Edge Gp-Cutting
| 13***84 | Edge Group-Cutting | 1 |
| 19***37 | Plate | 1 |
| 19***54 | Pin-Spring | 2 |
279-5360 Fork Ar-Grapple -Industrial
| 27***60 | Fork Ar-Grapple; -Industrial | 1 |
| 2S***08 | Washer-Retaining; (0.531x3.25x0.438-In Thk) | 2 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 1 |
285-6114 Fork Ar-Grapple -Utility
| 11***14 | Screen; (Water Tank) | 1 |
| 11***15 | Gasket | 1 |
| 28***14 | Fork Ar-Grapple; -Utility | 1 |
285-6115 Fork Ar-Grapple -Utility
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 06***51 | Clamp | 2 |
| 09***12 | Clip | 2 |
162-8139 Fork Ar-Grapple -Industrial
| 16***39 | Fork Ar-Grapple; -Industrial | 1 |
| 17***14 | Film-Stripe; (Reflective, Red, White) | 1 |
| 17***15 | Film; (Reflective)(Warning) | 1 |
279-5350 Fork Ar-Grapple -Industrial
| 18***86 | Step As | 1 |
| 27***50 | Fork Ar-Grapple; -Industrial | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
165-8727 Fork Ar-Grapple -Utility
| 16***63 | Motor-Electric; (12-Volt) | 1 |
| 16***27 | Fork Ar-Grapple; -Utility | 1 |
| 24***23 | Head-Pump | 1 |
163-4812 Fork Ar-Grapple -Industrial
| 16***63 | Motor-Electric; (12-Volt) | 1 |
| 16***12 | Fork Ar-Grapple; -Industrial | 1 |
| 17***33 | Head-Pump | 1 |
165-8728 Fork Ar-Grapple -Utility
| 16***28 | Fork Ar-Grapple; -Utility | 1 |
| 17***41 | Spring | 4 |
| 17***73 | Plate As | 1 |
164-9614 Fork Gp-Grapple
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 06***51 | Clamp | 2 |
| 09***12 | Clip | 2 |
162-8140 Fork Gp-Grapple
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 09***12 | Clip | 2 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
163-4811 Fork Gp-Grapple
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 06***51 | Clamp | 2 |
| 09***12 | Clip | 2 |
279-5351 Fork Gp-Grapple -Industrial
| 19***06 | Cap As; (Water Tank) | 1 |
| 19***07 | Fitting-Drain | 1 |
| 27***51 | Fork Group-Grapple; -Industrial | 1 |
285-6110 Fork Gp-Grapple
| 13***20 | Tooth-Uni-Single Strap | 1 |
| 24***49 | Screw-Flat Head; (M16x2-Thd) | 2 |
| 28***10 | Fork Group-Grapple | 1 |
195-6942 Fork Gp-Pallet
| 19***42 | Fork Group-Pallet | 1 |
195-8545 Fork Gp-Pallet
| 19***45 | Fork Group-Pallet | 1 |
| 21***05 | Air Conditioner Group | 1 |
| 7X***37 | Bolt-Plt; (M8 X 1.25 X 35) | 4 |
195-6943 Fork Gp-Pallet
| 19***43 | Fork Group-Pallet | 1 |
243-0003 Fork Gp-Pallet -Kit
| 11***99 | Gasket; (Air Conditioner Control) | 1 |
| 11***31 | Switch-Temperature; (Air Conditioner) | 1 |
| 18***15 | Clip | 10 |
243-0001 Fork Gp-Pallet -Kit
| 21***86 | Lines Group-Heater | 1 |
| 21***48 | Condenser & Mtg Group-Refrigerant | 1 |
| 21***94 | Duct Group-Cab Air | 1 |
243-0002 Fork Gp-Pallet -Kit
| 21***86 | Lines Group-Heater | 1 |
| 21***48 | Condenser & Mtg Group-Refrigerant | 1 |
| 21***94 | Duct Group-Cab Air | 1 |
165-8736 Fork Gp-Utility
| 16***36 | Fork Group-Utility | 1 |
| 19***37 | Insert-Threaded; (M8x1.25-Thd) | 2 |
| 19***39 | Stud | 4 |
165-8737 Fork Gp-Utility
| 10***62 | Screw-Machine; (4-40x0.63-In) | 4 |
| 13***16 | Stud-Ball | 2 |
| 14***28 | Locknut; (4-40-Thd) | 4 |
252-8026 Fork Gp-Utility
| 25***26 | Fork Group-Utility | 1 |
165-8732 Fork Gp-Utility
| 11***31 | Switch-Temperature; (Air Conditioner) | 1 |
| 16***32 | Fork Group-Utility | 1 |
| 18***15 | Clip | 10 |
252-8025 Fork Gp-Utility
| 19***23 | Window Group-Cab; -Rear | 1 |
| 21***50 | Fastener Group-Wiring Harness | 1 |
| 21***56 | Liner Group-Cab | 1 |
165-8739 Fork Gp-Utility
| 15***71 | Compartment As | 1 |
| 16***39 | Fork Group-Utility | 1 |
| 19***35 | Insert-Threaded; (M6x1-Thd) | 4 |
165-8738 Fork Gp-Utility
| 16***38 | Fork Group-Utility | 1 |
| 21***45 | Box As-Storage | 1 |
| 22***91 | Latch As | 1 |
285-6105 Fork Gp-Utility
| 21***86 | Button | 7 |
| 21***67 | Cab Group-Enclosed Rops | 1 |
| 28***72 | Window | 1 |
230-5670 Frame Gp-Blade
| 23***70 | Frame Group-Blade | 1 |
| 8T***42 | Rod End-Yoke | 1 |
| 8T***44 | Pin As-Spring | 1 |
279-5358 Frame Gp-Fork -Industrial
| 21***33 | Compressor Group-Refrigerant | 1 |
| 21***40 | Motor Group-Gear; -Refrigerant Compressor | 1 |
| 23***90 | Housing-Support | 1 |
279-5352 Frame Gp-Fork -Industrial
| 27***74 | Cable Group-Control | 1 |
| 27***52 | Frame Group-Fork; -Industrial | 1 |
| 29***97 | Handle Group | 1 |
165-8734 Grapple & Cylinder Gp-Utility
| 16***34 | Grapple & Cylinder Group-Utility | 1 |
| 21***32 | Compressor & Motor Group-Refrig | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 3 |
285-6116 Grapple & Cylinder Gp-Utility
| 21***60 | Shroud As | 1 |
| 21***50 | Fan As; (10-Blade)(Air Conditioner, Heater) | 2 |
| 21***06 | Coil As | 1 |
165-8740 Grapple Gp-Utility
| 16***40 | Grapple Group-Utility | 1 |
| 21***60 | Shroud As | 1 |
| 21***50 | Fan As; (10-Blade)(Air Conditioner, Heater) | 2 |
215-3961 Handle & Pin Gp-Coupler -Rh
| 15***70 | Kit-Pilot Valve; (Lever) | 1 |
| 17***02 | Boot | 1 |
| 21***61 | Handle & Pin Group-Coupler; -Rh | 1 |
215-3960 Handle & Pin Gp-Coupler -Lh
| 15***70 | Kit-Pilot Valve; (Lever) | 1 |
| 17***02 | Boot | 1 |
| 21***60 | Handle & Pin Group-Coupler; -Lh | 1 |
215-3958 Handle Gp-Coupler -Lh
| 15***70 | Kit-Pilot Valve; (Lever) | 1 |
| 17***03 | Boot | 1 |
| 21***58 | Handle Group-Coupler; -Lh | 1 |
215-3959 Handle Gp-Coupler -Rh
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
177-9152 Kit-Roading Plate & Mounting -Bucket
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 17***52 | Kit-Roading Plate & Mounting; -Bucket | 1 |
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
319-9480 Kit-Roading Plate & Mounting -Bucket
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 7 |
215-3957 Link Gp-Coupler
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 17***83 | Locknut; (M4x0.7-Thd) | 3 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 11 |
175-4238 Lock Gp-Quick Coupler -Mechanical
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***60 | Strap | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
184-6098 Plate Gp-Roading -Rh
| 09***07 | Nut; (M12x1.75-Thd) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***60 | Strap | 1 |
184-6097 Plate Gp-Roading -Lh
| 09***07 | Nut; (M12x1.75-Thd) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***60 | Strap | 1 |
161-7290 Pump Gp-Diaphragm
| 11***60 | Strap | 1 |
| 16***90 | Pump Group-Diaphragm; -Water Spray-Water | 1 |
| 21***19 | Valve Group-Pilot; -Direction, Speed | 1 |
247-6742 Pump Gp-Diaphragm
| 11***60 | Strap | 1 |
| 16***25 | Horn As; (24-Volt, Low Tone) | 1 |
| 21***19 | Valve Group-Pilot; -Direction, Speed | 1 |
177-1983 Spring Gp-Blade
| 09***07 | Nut; (M12x1.75-Thd) | 1 |
| 11***60 | Strap | 1 |
| 16***25 | Horn As; (24-Volt, Low Tone) | 1 |
188-7733 Step Gp-Material Handling Arm
| 09***07 | Nut; (M12x1.75-Thd) | 1 |
| 11***60 | Strap | 1 |
| 11***90 | Fuse; (10 Amp) | 1 |
173-7407 Stop Gp-Bucket -Utility
| 09***07 | Nut; (M12x1.75-Thd) | 1 |
| 16***25 | Horn As; (24-Volt, Low Tone) | 1 |
| 17***07 | Stop Group-Bucket; -Utility | 1 |
116-2001 Strainer Gp-Water
| 09***07 | Nut; (M12x1.75-Thd) | 1 |
| 11***60 | Strap | 1 |
| 11***90 | Fuse; (10 Amp) | 1 |
252-0386 Tank & Mtg Gp-Water -Kit
| 21***36 | Coupling Group-Drive; (Refrigerant Compressor, Motor) | 1 |
| 21***37 | Coupling | 1 |
| 21***38 | Hub; (Compressor) | 1 |
233-5993 Tank & Mtg Gp-Water
| 09***07 | Nut; (M12x1.75-Thd) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
233-5992 Tank & Mtg Gp-Water
| 09***07 | Nut; (M12x1.75-Thd) | 1 |
| 16***25 | Horn As; (24-Volt, Low Tone) | 1 |
| 21***24 | Wiring Group-Work Tool; -Vertical Lift | 1 |
346-1834 Tank & Mtg Gp-Water -Kit
| 17***05 | Screw-Button Head; (M6 X 1.0 X) | 8 |
| 21***89 | Console; (Rh) | 1 |
| 21***91 | Console; (Lh) | 1 |
166-2551 Tank Gp-Water
| 10***06 | Screw-Pan Head; (6-19x0.37-In) | 2 |
| 10***04 | Suppressor As-Arc | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
141-4999 Tooth Gp-Uni
| 09***25 | Pin-Clevis | 1 |
| 12***18 | Seal; (1000-cm) | 0 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 8 |
232B serial number reference
On 232B/232B Series 2 skid steers the ID plate sits on the left side at the rear of the machine, under the left lift-arm support. On 2001-and-later machines the PIN is 17 characters; the serial number itself is the last portion of that PIN, a 3-letter prefix (e.g. SCH) followed by a 5-digit sequence number unique to that unit.
| Prefix | Identifies | Notes |
|---|---|---|
| SCH | 232B base | Serial range from 00001 up to about 02474 per factory service-manual split. Naturally aspirated Cat 3024C diesel, rated near 37 kW (49 hp net). Approx. build years 2004-2009 (single spec aggregator, confirm with dealer). |
| SCH | 232B Series 2 (turbocharged) | Same SCH prefix, later block starting about 02475 and up; a documented service unit falls in the 03516-03518 span, consistent with this later block. Turbocharged Cat 3024C T (C2.2T) diesel, gross rating near 46 kW (61-62 hp), net near 42 kW (56 hp), Tier 2 emissions. Build years extend into the mid-2010s per one spec aggregator (confirm with dealer). |
Frequently asked questions
What engine does the Caterpillar 232B use?
The base 232B uses the Caterpillar 3024C, a 2.2 liter four-cylinder naturally aspirated diesel rated near 52 hp (39 kW) gross and 49.7 hp (37 kW) net at 2600 rpm. The 232B Series 2 (232B2) update switched to the turbocharged Cat C2.2T version of the same engine family, rated near 61 hp (45 kW) gross and 56 hp (42 kW) net. Confirm the engine plate and serial prefix before ordering parts, since output and some components differ by series.
What is the operating weight of the Caterpillar 232B?
Operating weight varies by series and configuration: about 3,020 kg (6,660 lb) for the base 232B and about 3,056 kg (6,737 lb) for the 232B Series 2, with an optional counterweight adding a bit more. Rated operating capacity runs roughly 793 kg (1,750 lb) on the base machine up to about 862 kg (1,900 lb) on Series 2.
What replaced the Caterpillar 232B?
The Cat 232D succeeded the 232B lineup, arriving around 2016 with an updated engine and emissions package. The 232B itself followed the earlier, non-suffix Cat 232 and shares its chassis, chain-drive final drive, and wet-disc brakes with siblings in the B-series lineup such as the 216B, 226B, and 242B.
What 232B owners discuss
What do owners say about the hydraulic system and drive pump on the 232B?
Small-frame Cat B-series skid steers built on this platform, the 232B included, share a known weak point at the piston pump's coupling hub. Over time the coupler can partially disengage from the drive, and once less than half its teeth stay engaged it strips and drive or hydraulic power drops off. Owners also report a pump whine on cold mornings, usually oil starvation from thick cold fluid being forced through tight tolerances at full throttle before warm-up. Letting the machine idle at low rpm for five to ten minutes before loading it is the common practice operators use to avoid cavitation wear that builds up gradually rather than failing all at once.
Which engine does the 232B use, and are there any quirks to watch for?
The 232B runs the naturally aspirated Cat 3024C, a 2.2 L four-cylinder diesel rated around 49-52 hp (37 kW), depending on whether the figure quoted is gross or net flywheel power. That's a different engine tune from the turbocharged 3024CT fitted to the higher-output 242B in the same family, so torque and throttle response differ between the two machines even though the block is closely related. Owners of this small-displacement diesel report noticeable oil consumption during break-in, sometimes taking several hundred to close to a thousand hours to settle down, which some attribute to emissions-era tuning working a small engine hard. Head gasket failures and injector or fuel-pump faults causing rough idle or no-start also come up periodically, more often on higher-hour machines or after skipped fuel filter service.
Are there common electrical or sensor issues that cause no-start complaints?
Most 232B no-start cases trace back to basics before anything electronic: a dead or weak battery, corroded ground connections, or an alternator that won't recharge the battery even after a jump-start. A recurring culprit tied specifically to this machine's seat-interlocked start circuit is the operator seat switch. If it's worn, misadjusted, or has a loose connection, the machine won't crank even with good battery voltage, and some owners have jumpered it as a quick fix. That switch is a safety interlock meant to stop the machine from starting or moving with no one seated, so treat a jumper as diagnostic only, and have your dealer verify and properly repair the seat switch and start-safety circuit before the machine goes back into regular use.
What wear patterns are typical for this machine type?
As a wheeled, not tracked, skid steer, the 232B's main wear items are tires, wheel bearings, and loader-arm pin and bushing sets rather than track and roller wear. Uneven or accelerated tire wear usually points to low pressure, overloading, or a lot of hard-surface pivot turning. Quick-attach coupler pins and boom or tilt-cylinder pin bushings loosen with hours and show up as play or a clunk when curling or attaching tools; replacing these pin-and-bushing sets is treated as routine wear-item maintenance on this model rather than a sign of abuse.
Does the 232B's lift design affect how it behaves compared to other Cat skid steers?
Yes. The 232B family uses a vertical-lift boom geometry, shared with the 242B, 252B, and 257B, rather than the radial-lift geometry on machines like the 226B and 236B. Vertical lift keeps the bucket closer to the machine through the lift path, giving more reach and height at full lift for loading trucks, while radial-lift machines are generally considered stronger for digging and breakout force near ground level. Buyers choosing between the two designs tend to pick based on whether the work is mostly truck loading and stacking or ground-engaging digging.
Why does the machine seem hard to start or rough at idle when cold?
This comes up often enough to be considered a known trait of the small-displacement diesel in this family: cylinders can fire unevenly for the first several seconds on a cold start before all four smooth out. Genuine faults look similar, though, so if hard starting is new or getting worse, check fuel filters, bleed air from the fuel lines, and inspect injectors for a proper spray pattern before writing it off as normal cold-weather behavior.
What should I check before buying a used 232B?
Pull maintenance records and hour-meter history first; heavy full-time use (30-plus hours a week) points to more wear ahead regardless of what the meter shows. Start the engine cold if possible, watch for more than a few seconds of smoke, listen for knock, and check the oil for a thick, dark, tar-like look that suggests neglected changes. Run the boom to full lift and hold it there, watching for cylinder drift or sinking, which flags hydraulic or seal wear, and cycle the tilt and auxiliary functions listening for the pump whine described above. Check quick-attach pins and boom pivot bushings for play, inspect tires for even wear and correct size and pressure, and confirm the seat switch and other start-safety interlocks work correctly, since a bypassed interlock is a common cheap fix sellers use to mask an electrical fault. Because the ROPS/FOPS cab structure, seat restraint, and start-interlock circuit are all safety items, have your dealer verify these are intact and functioning before putting the machine into regular service.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 232B part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.