Caterpillarmotor grader
Caterpillar 16M
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 16M is a large motor grader built for mine haul-road construction and heavy highway work, sitting at the top of Cat's M-series grader line when it was introduced. It runs a Cat C13 ACERT diesel across the family, rated 221 kW (297 hp) at 2000 rpm in the base VHP arrangement and up to 248 kW (332 hp) in the higher-output VHP Plus arrangement. Operating weight spans roughly 26.06-35.67 t (57,452-78,643 lb) depending on counterweight, tires, and attachments, with a typically equipped mining-spec unit running near 30.5 t. Cat built the base 16M from about 2009 to 2015 under the B9H and R9H serial number prefixes, replacing the earlier 16H. Configurations include standard and VHP Plus power arrangements, a 3-shank ripper/scarifier expandable to a 7-position frame, and AccuGrade-ready wiring and hydraulics for factory- or dealer-installed grade control.
Caterpillar replaced the base 16M with the Tier 4 Final 16M3 around 2015, carried under the N9Y and E9Y serial number prefixes. The 16M3 kept the C13 ACERT but added SCR aftertreatment with diesel exhaust fluid, an improved powershift transmission with automatic parked regeneration, and an ECO mode that trims engine speed in working gears for fuel savings. The 16M3 was later succeeded by the current plain "16" model, continuing a lineage that traces back through the 16H. Because the 16M and 16M3 sold in large numbers into mining and road-maintenance fleets worldwide, they remain common on the used market today and share parts commonality across the 16H/16M/16M3/16 lineage; buyers need the serial prefix to match the correct engine aftertreatment, powershift, and circle-drive components before ordering parts.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 16M specifications
Engine
| Engine model | Cat C13 ACERT, 6-cylinder, with Variable Horsepower (VHP) system |
| Displacement | 12.5 L (763 cu in), bore 130 mm (5.1 in) x stroke 157 mm (6.2 in) |
| Net power, base (1st gear) | 221 kW (297 hp) |
| Net power, VHP range | 221-233 kW (297-312 hp) at 2000 rpm, rising through the gear range |
| Net power, VHP Plus range (optional) | up to 221-248 kW (297-332 hp) on VHP Plus-equipped units |
| Maximum torque | 1,710 Nm (1,261 lb-ft) |
| Emissions | U.S. EPA Tier 3 / EU Stage IIIA equivalent for regulated markets; Tier 2 equivalent offered for non-regulated markets. No Tier 4 Final option on this generation (added later on the successor 16M3) |
Weights
| Operating weight, typically equipped | approx. 30,540-30,620 kg (67,338-67,600 lb), varies slightly by document revision/region |
| Operating weight range (min-max configuration) | 26,060 kg (57,452 lb) minimum to 35,670 kg (78,643 lb) maximum, depending on tires, ballast and attachments |
| Ground pressure | not published for this wheeled machine |
Dimensions
| Overall length | 9.96 m (32 ft 8 in) |
| Width over tires | 3.10 m (10 ft 2 in) |
| Height to cab top | 3.71 m (12 ft 2 in) |
| Wheelbase | 6.99 m (22 ft 11 in) |
| Tandem wheelbase (axle spacing) | approx. 1.84 m (6 ft) |
| Ground clearance, front axle | 0.69 m (2 ft 3 in) |
| Ground clearance, rear tandem | 0.41 m (1 ft 4 in) |
| Moldboard (blade) width | 4.9 m (16 ft) |
| Moldboard height | 787 mm (31 in) |
Performance
| Travel speed, forward (top gear) | 54 km/h (33.5 mph), 8 forward gears |
| Travel speed, reverse (top gear) | 42.7 km/h (26.5 mph), 6 reverse gears |
| Transmission | Power-shift, direct-drive countershaft transmission |
| Maximum moldboard cutting depth | 488 mm (19.2 in) |
Service capacities (summary)
| Fuel tank | 511 L (135 US gal) |
| Hydraulic system, total | 114 L (30.1 US gal) |
| Engine oil | 30 L (7.9 US gal) |
| Cooling system | 46.6 L (12.3 US gal) |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
16M fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (incl. filter) - Cat C13 ACERT VHP | 30 L (7.9 US gal) | Cat DEO-ULS or Cat DEO diesel engine oil (API CJ-4/CI-4 family, preferred over commercial oils). Viscosity by climate: SAE 10W-30 for roughly -18C to 40C (0F to 104F) ambient; SAE 15W-40 for -10C to 50C (14F to 122F); Cat DEO-ULS SYN SAE 5W-40 or Cat DEO Cold Weather SAE 0W-40 for cold-soaked starts below -18C. |
| Cooling system | 46.5-60.4 L (12.3-16 US gal) - varies by configuration/series | Cat ELC (Extended Life Coolant), factory-filled at roughly 50/50 dilution, protects to -35C (-30F). Optional cold-weather packages extend protection to -40C, -45C, or -50C. Minimum 30 percent glycol required, 50 percent recommended; water-only fill is not permitted. |
| Fuel tank | 492-534 L (130-141 US gal) - varies by configuration/series | Distillate diesel fuel meeting Cat's nonroad diesel fuel specification (ULSD or LSD depending on regional sulfur rules), minimum cetane number 40. Fast-fill, ground-level fueling is standard. |
| Power train - transmission and differential | 114 L (30.1 US gal) | Cat TDTO transmission/drive-train oil. Viscosity by climate: SAE 30 is factory fill for roughly 0C to 35C (32F to 95F); SAE 10W covers -20C to 10C; SAE 50 covers 10C to 50C; Cat TDTO Cold Weather SAE 0W-20 for below -20C starts; Cat TDTO-TMS multigrade for machines seeing wide daily swings (about -15C to 43C). |
| Tandem final drive housing, each side | 121.5 L (32.1 US gal) each | Same Cat TDTO family as the power train, grouped with the wheel spindle bearings in the lubricant charts. SAE 30 is factory fill for roughly -10C to 40C; SAE 10W and SAE 50 cover the colder and hotter extremes; Cat TDTO Cold Weather or Cat TDTO-TMS multigrade for wide ambient swings. |
| Front wheel spindle bearing housing | 0.9 L (0.24 US gal) | Same Cat TDTO family and viscosity guidance as the tandem final drives above - this housing is grouped with tandem drive/wheel spindle bearings in the lubricant charts. |
| Circle drive housing | 8 L (2.1 US gal) | The 16M/24M grader family (along with the older 16H/24H) is called out separately for this compartment: Cat FDAO Syn multigrade final-drive-and-axle oil is preferred (roughly -15C to 50C), or Cat FDAO SAE 60 (-10C to 50C); a commercial oil meeting the Cat FD-1 performance spec at SAE 50 is acceptable for -10C to 32C. This is different from most other Cat motor grader circle drives, which spec gear oil instead. |
| Hydraulic system - circuit total / tank | Total 114 L (30.1 US gal); tank 65 L (17.2 US gal) | The M-Series graders get their own hydraulic oil table, distinct from Cat's general hydraulic chart. Cat HYDO Advanced 10 SAE 10W is factory fill (roughly -15C to 40C). Cat HYDO Advanced 30 SAE 30 covers 20C to 50C. Cat Bio HYDO Advanced ISO 46 multigrade is used where biodegradable fluid is required (-25C to 45C). For cold-climate fill, Cat TDTO Cold Weather SAE 0W-20 or Cat DEO Cold Weather SAE 0W-40 cover down to -40C; commercial oils meeting Cat ECF-1a, ECF-2, or ECF-3 at SAE 0W-30 are an accepted alternate down to -35C. |
| Grease (spec only) | Not applicable - grease-fitting service, no reservoir capacity | Articulation bearings and pins, blade-lift and centershift cylinder sockets, fan-drive belt tightener, and pump-drive shaft slip spline: Cat Extreme Application Grease (NLGI 1 or 2) for heavy-duty work such as ditching, ripping, heavy road maintenance, and snow plowing; Cat Prime Application Grease (NLGI 2) for average road maintenance and scarifying; Cat Utility Grease (NLGI 2) for finish grading and light road travel. Fan-drive bearings take Cat Ball Bearing Grease (NLGI 2). |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 16M maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
| Every 6,000 h |
|
Servicing the 16M beyond the schedule
Predictive Maintenance & Fluid Analysis
The C13 ACERT block responds well to scheduled oil sampling: pull engine oil at every planned interval and watch trend data rather than waiting for a fault code. Circle drive housing runs a final-drive-and-axle oil, not the gear oil used elsewhere on the machine, so sample it separately. Check tandem final drives for metal-in-oil after high-load haul-road work, and on Tier 4 Final 16M3 units monitor DEF quality and consumption alongside coolant condition to catch SCR or coolant degradation early.
Corrective & Common Repairs
Circle drive gear teeth and segment gear wear fastest on 16M units running mining haul roads full time; expect to weld up worn teeth or replace segments well before a full circle rebuild. Moldboard blade-slide glides and shims wear thin and show up as blade play and grinding noise during rotation. The cross-shaft linking blade to circle arms wears at its bushings and can crack under sustained load. On Tier 4 Final 16M3 units, SCR/DPF sensor faults and DEF line issues are the most common electronic repairs.
Overhaul & Rebuild Points
A full circle, drawbar, and moldboard rebuild is the 16M's signature overhaul: worn segment gear teeth, wear strips, and cross-shaft bushings get machined, re-bushed, and reassembled with new pins and shims. Tandem final drives warrant planetary gear and bearing inspection at high hours given the tonnage these graders move on haul roads. Powershift clutch packs and modulation valves should be checked when shift quality degrades. Time a C13 ACERT top-end overhaul, covering the turbocharger, injectors, and cylinder head, to oil-sample trends rather than a fixed hour number.
Seasonal & Environment Servicing
Cold climates call for ambient-graded engine oil and coolant, block-heater use before startup, and DEF freeze protection on Tier 4 Final 16M3 units since DEF crystallizes below freezing. Hot, dusty mine sites push abrasive grit into circle drive teeth, wear strips, and the drawbar ball socket, so shorten grease intervals and inspect AccuGrade wiring and sensors for dust ingress. Clean radiator and charge-air-cooler fins more often in high-ambient or high-dust conditions to protect the C13 ACERT from overheating and derate.
16M common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 220-8678 | Seal-Ring | Fuel system service | Check fitment → |
| 326-1644 | Filter As-Water Sep & Fuel | Fuel system service | Check fitment → |
| 245-3818 | Filter Element As-Air | Air intake service | Check fitment → |
| 245-3819 | Filter Element As-Air | Air intake service | Check fitment → |
| 149-1912 | Filter Element-Cab Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
16M fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| E192 (3) | Steering system malfunction event — the Implement ECM did not receive a valid position signal from the steering cylinder position sensor circuit and forces reduced steering operation as a safety measure. | Play in the steering cylinder pivot/bearings letting the front wheels flutter and confuse the position sensor, a failing steering cylinder position sensor, or a corroded/loose harness connector feeding the Implement ECM and Transmission/Chassis ECM. | Bring the machine to a safe stop, then check the steering cylinder position sensor connectors and harness for corrosion or damage, confirm ECM software is current, and clear any underlying active steering CIDs before returning to service. |
| CID 2200-3 / CID 2201-3 | Left or right steering cylinder position sensor signal voltage reads above the normal operating range. | Chafed or shorted sensor wiring, a corroded connector at the cylinder, or a failing internal position sensor in the steering cylinder itself. | Inspect the affected cylinder's sensor connector and harness run for damage, verify signal and supply voltage against the troubleshooting guide spec, and replace the sensor or cylinder position-sensor assembly if it fails test. |
| CID 1674-4 / CID 1674-6 | Common return circuit shared by the secondary (backup) steering solenoids reads open (voltage below normal) or shorted (voltage above normal). | Damaged or corroded harness/connector in the secondary steering solenoid circuit, or a failed solenoid coil. | Inspect the secondary steering solenoid wiring and connectors, check solenoid coil resistance/continuity, and confirm the secondary steering pump activates correctly during a test. |
| CID 2175-6 | Left secondary steering solenoid circuit current reads above normal, indicating a short. | Internally shorted solenoid coil or wiring chafed and shorting to ground or power. | Disconnect the solenoid connector to isolate harness from solenoid, check coil resistance, and repair the harness or replace the solenoid as needed. |
| E1127 (3) | Event tied to the engine intake manifold pressure sensor circuit reading outside its expected range, which can trigger an automatic engine shutdown after a short run period. | A failing intake manifold pressure sensor, a damaged sensor connector or wiring run, or a related boost/turbo sensor issue. | Inspect the intake manifold pressure sensor wiring and connector for damage or corrosion, bench-test or swap the sensor, and confirm engine ECM software is current before further diagnosis. |
| CID 100-3 / CID 100-4 | Engine oil pressure sensor circuit signal reads outside the normal voltage range (open or shorted), a wiring/sensor fault rather than a confirmed low-pressure condition. | Damaged sensor wiring, a corroded connector, or a failed oil pressure sensor. | Check engine oil level first, then inspect the sensor connector and wiring, test sensor output against spec, and replace the sensor if it reads erratically. |
| CID 110-3 / CID 110-4 | Engine coolant temperature sensor circuit signal reads outside the normal voltage range. | Sensor wiring damage or corrosion, or a failed coolant temperature sensor (the engine uses separate sensors for the gauge circuit and the ECM circuit). | Test both coolant temperature sensors and their wiring, and replace whichever sensor reads out of range or erratically. |
| E360 | Low engine oil pressure event — actual measured oil pressure has dropped below the safe threshold for current engine speed; this is a real condition alert, not a sensor circuit fault. | Low oil level, a worn oil pump, a clogged oil filter, or genuine internal pressure loss. | Shut the engine down immediately, check oil level and condition, and verify actual pressure with a mechanical gauge before restarting. |
| E361 | High engine coolant temperature event — actual coolant temperature has exceeded the safe operating threshold. | Low coolant level, a blocked radiator core or fan shroud, a failed fan drive/fan clutch, or a thermostat stuck closed. | Reduce load and let the engine idle down, check coolant level once safe to do so, inspect the radiator and fan drive, and verify thermostat operation. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
16M attachments & work tools
Moldboard / grading blade
Standard moldboard is 4.9 m (16 ft) wide, 787 mm (31 in) tall and 25 mm (1 in) thick, with hydraulic sideshift and tip built in. Blade position angle goes up to 65 degrees, with tip range of 40 degrees forward and 5 degrees back, giving an aggressive angle that rolls dry or cohesive material off the blade more freely.
Cutting edges and end bits (GET)
Standard cutting edge is curved, through-hardened steel, 203 mm x 25 mm (8 in x 1 in), bolted on with 19 mm (3/4 in) mounting bolts; end bits are 152 mm wide by 19 mm thick (6 in x 3/4 in) hardened steel. Flat, curved and serrated edge profiles and graderbit systems are offered for different soil and wear conditions, all bolt-on rather than quick-change.
Front-mounted work tool group
Front end takes either a push plate/counterweight or a front lift group; the lift group can carry a front dozer blade for light dozing, stockpile work or ditch backfill, adding versatility beyond straight grading. This front group is run from the cab ripper control pod alongside the rear ripper circuit.
Rear ripper/scarifier
Rear ripper frame has seven shank-holder positions, normally fitted with three shanks and expandable to a full set for heavier scarifying ahead of the moldboard. Penetration force runs about 10,163 kg (22,140 lb) and pryout force about 15,323 kg (33,788 lb), with maximum ripping depth near 452 mm (17.8 in); raising the beam adds roughly 1.6 m (63 in) to overall machine length.
Blade float and variable float
Blade float lets the moldboard follow road contour under its own weight, useful for finish grading or light material and snow removal; floating just one lift cylinder holds the toe on a hard surface while the operator sets slope with the other side. Variable float is an add-on that lets the operator dial in how much down-force the blade carries while floating.
Automatic lubrication system
An optional centralized auto-greasing system feeds pins and bushings on the circle, drawbar and lift linkage on a timed cycle, cutting manual grease points and helping purge contamination from open joints.
Grade control readiness
Electro-hydraulic valves, cab wiring harness and mounting bosses for grade control are built in as standard equipment (grade-control ready). An attachment-ready option package adds further brackets, cab controls and harnesses so a cross-slope, sonic, laser, GPS or automatic blade-control kit can be fitted later without major rework.
Snow wing / winter work tools
A front snow wing or snow plow can be fitted for winter road clearing on this grader class; the moldboard sideshift cylinder is mounted on the left side of the frame specifically to stay clear of a snow wing attachment. A dedicated factory snow arrangement package bundling winter equipment is also offered. Exact snow wing offering varies by dealer and region -- confirm current availability with your dealer.
Coupler and mounting system
There is no pin-and-latch quick coupler on this machine. The moldboard mounts to the circle through a shimless retention system with vertical and horizontal adjusting screws and replaceable brass wear strips, keeping the blade tight without manual shimming. Cutting edges and end bits bolt to the moldboard, and the rear ripper/scarifier bolts to its own frame-mounted holder rather than a quick-attach interface.
Auxiliary hydraulics and valve arrangements
Extra work tools draw from additional hydraulic valve arrangements specified at the factory. A programmable auxiliary hydraulic pod, separate from the standard ripper control pod, can handle up to six auxiliary circuits, allowing combinations such as front lift group plus rear ripper plus another tool to run together; simpler two-tool jobs run off the base ripper control pod alone.
Factory machine arrangements and guarding
Regional Canadian and European arrangements and a Snow arrangement package are offered from the factory, alongside cold-weather coolant options down to -50C (-58F) and HID or drop-down roading lighting kits. Optional guarding covers debris screens, a transmission guard and sound-suppression covers for the engine and hydraulic compartment, plus rear fenders to control tire spray and thrown debris.
All 16M assemblies by section
Every catalogued assembly group for the Caterpillar 16M. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
249-7364 Aftercooler Gp-Air
| 11***15 | Stud-Taperlock; (M10x85-mm Oal) | 12 |
| 23***30 | Manifold-Exhaust; (End) | 2 |
| 24***34 | Manifold-Exhaust; (Center) | 1 |
249-7319 Air Cleaner Gp
| 14***80 | Clamp Assem. | 1 |
| 15***41 | Nut-Weld; (M10x1.5-Thd) | 2 |
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 15 |
250-0366 Air Cleaner Gp
| 14***80 | Clamp Assem. | 1 |
| 15***41 | Nut-Weld; (M10x1.5-Thd) | 2 |
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 15 |
249-7322 Lines Gp-Air
| 11***87 | Bolt; (M6x0.04x10.4-mm)(6mm X 0.04 Thd) | 1 |
| 12***53 | Clamp As; (Turbine) | 1 |
| 16***58 | Clip-Hose | 1 |
268-6686 Lines Gp-Air -Inlet
| 12***63 | Adapter Group-Fast Fill Fuel; (Auto Shutoff) | 1 |
| 13***74 | Clip-Loop | 1 |
| 1P***82 | Flange-Half | 2 |
247-2833 Manifold Gp-Exhaust
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 1 |
| 03***88 | Connector-Tube Assembly To Main Relief | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
222-3092 Manifold Gp-Inlet
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 1 |
| 03***88 | Connector-Tube Assembly To Main Relief | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
249-7327 Muffler Gp
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 1 |
| 03***88 | Connector-Tube Assembly To Main Relief | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
248-5352 Turbocharger Gp
| 22***78 | Seal-Ring; (Fuel And Water Sep Filter) | 1 |
| 24***52 | Turbocharger Group | 1 |
| 32***44 | Filter As-Water Sep & Fuel; (Primary) | 1 |
256-6004 Turbocharger Gp
| 23***28 | Seal-O-Ring; (32.99mm Id) | 1 |
| 23***75 | Seal-O-Ring; (36.09mm Id) | 1 |
| 25***04 | Turbocharger Group | 1 |
Basic Engine
248-6662 Actuator Gp-Valve
| 13***18 | Seal-O-Ring; (Camshaft) | 1 |
| 1B***05 | Key; (Woodruff) | 1 |
| 22***07 | Gear; (96-Teeth) | 1 |
325-4505 Base Gp-Valve Cover
| 32***05 | Base Group-Valve Cover | 1 |
| 4N***14 | Cover | 1 |
| 6V***29 | Bolt; (M16x2.0x40mm) | 3 |
267-0010 Base Gp-Valve Cover -Engine
| 26***10 | Base Group-Valve Cover | 1 |
| 4N***14 | Cover | 1 |
| 6V***29 | Bolt; (M16x2.0x40mm) | 3 |
223-7463 Camshaft Gp
| 1H***39 | Packing,Preformed Cover Part Of Kit P/N 4j***80 | 1 |
| 22***63 | Camshaft Group | 1 |
| 4P***50 | Cover | 1 |
323-1682 Cover Gp-Flywheel Housing
| 21***28 | Washer-Isolator | 10 |
| 22***11 | Seal-Valve Cover; (Mechanism) | 1 |
| 29***85 | Plate-Identification; (Cat C13 Acert)(Acert) | 1 |
216-5540 Cover Gp-Flywheel Housing
| 21***40 | Cover Group-Flywheel Housing; -Bottom | 1 |
| 28***23 | Cover Group | 1 |
| 6V***97 | Bolt; (M12x1.75x40-mm)(Locking) | 3 |
220-6390 Cover Gp-Flywheel Housing
| 11***01 | Seal (Rear Pump To Center Pump) | 1 |
| 22***90 | Cover Group-Flywheel Housing | 1 |
| 28***23 | Cover Group | 1 |
136-4307 Cover Gp-Front Housing
| 12***82 | Bearing-Main; (0.51-mm Us)(.51mm U.S.) | 0 |
| 12***83 | Bearing-Main; (0.76-mm Us)(.76mm U.S.) | 0 |
| 12***84 | Bearing-Main; (0.51-mm Os)(.51mm O.S.) | 0 |
227-2574 Cover Gp-Front Housing
| 20***72 | Cap-Bearing | 7 |
| 22***46 | Bolt; (M18x2.5x170-mm) | 14 |
| 22***74 | Cover Group-Front Housing; -Air Compressor | 1 |
229-2614 Cover Gp-Valve Mechanism
| 18***69 | Bearing; (Sleeve) | 7 |
| 22***14 | Cover Group-Valve Mechanism | 1 |
| 30***82 | Cylinder Block As | 1 |
355-7194 Cover Gp-Valve Mechanism
| 10***60 | Seal; (Liner) | 6 |
| 19***30 | Liner-Cylinder Block | 6 |
| 30***83 | Cylinder Block As | 1 |
224-3881 Crankshaft Gp
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
| 22***81 | Crankshaft Group | 1 |
| 30***84 | Cylinder Block As | 1 |
303-1382 Cylinder Block As
| 30***82 | Cylinder Block As | 1 |
| 30***84 | Cylinder Block As | 1 |
| 3B***23 | Core Plug--Flywheel Housing Pinion Shaft Hole | 3 |
303-1384 Cylinder Block As
| 16***04 | Seal-O-Ring | 12 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 7 |
| 22***70 | Insert-Valve Seat; (Exhaust)(Standard) | 12 |
303-1383 Cylinder Block As
| 16***04 | Seal-O-Ring | 12 |
| 22***70 | Insert-Valve Seat; (Exhaust)(Standard) | 12 |
| 25***44 | Insert-Valve Seat; (0.51-mm Os Od)(Exhaust) | 0 |
240-7271 Cylinder Block Gp
| 16***04 | Seal-O-Ring | 12 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 7 |
| 22***70 | Insert-Valve Seat; (Exhaust)(Standard) | 12 |
303-3363 Cylinder Block Gp
| 19***63 | Fastener Group-Cylinder Head | 1 |
| 22***92 | Gasket; (Cylinder Head) | 1 |
| 25***95 | Cylinder Head Group | 1 |
345-3752 Cylinder Head As
| 19***63 | Fastener Group-Cylinder Head | 1 |
| 22***92 | Gasket; (Cylinder Head) | 1 |
| 30***17 | Cylinder Head Group | 1 |
342-4397 Cylinder Head As
| 16***78 | Seal-Valve Stem; (Exhaust) | 24 |
| 22***30 | Valve; (Exhaust) | 12 |
| 22***25 | Base | 12 |
308-6358 Cylinder Head As
| 16***78 | Seal-Valve Stem; (Exhaust) | 24 |
| 21***86 | Spring; (Outer) | 24 |
| 22***28 | Valve; (Inlet) | 12 |
257-4095 Cylinder Head Gp
| 12***92 | Pulley As-Idler; (8-Groove) | 1 |
| 14***01 | Cover-Dust; (Rear) | 1 |
| 18***06 | Compressor Group-Refrigerant; -Air Conditioner | 1 |
240-7679 Cylinder Head Gp
| 13***83 | Bolt-12 Point Head; (M10x1.5x30-mm) | 8 |
| 16***25 | Damper Assem. | 1 |
| 17***92 | Adapter | 1 |
305-0618 Cylinder Head Gp
| 21***60 | Bolt; (M10x1.5x130-mm) | 8 |
| 24***11 | Bolt-Cylinder Head; (M16x2x220-mm) | 26 |
| 2S***58 | Washer-Hard; (17x29x3-mm Thk)(Engine Brake) | 26 |
305-0617 Cylinder Head Gp
| 19***42 | Pulley As; (Idler) (8 Groove) | 1 |
| 21***95 | Belt Tensioner | 1 |
| 22***99 | Bracket-Support | 1 |
117-2766 Damper Gp
| 11***66 | Damper Group | 1 |
| 21***85 | Spacer; (10.5-mm Thk) | 1 |
| 8T***81 | Bolt; (M16x2.0x80mm) | 6 |
258-0651 Drive Gp-Accessory
| 25***88 | Flywheel As | 1 |
| 25***51 | Gear-Flywheel; (113-Teeth) | 1 |
| 25***51 | Drive Group-Accessory | 1 |
260-1406 Drive Gp-Accessory
| 21***70 | Shaft | 1 |
| 22***02 | Gear As; (64-Teeth) | 1 |
| 22***05 | Gear As; (Camshaft Idler, 71-Teeth) | 1 |
198-4963 Fastener Gp-Cylinder Head
| 15***58 | Gear Crankshaft; (68 Teeth) | 1 |
| 16***84 | Bearing-Sleeve | 1 |
| 18***94 | Gear Assem.; (64 And 14 Teeth) | 1 |
117-2771 Fastener Gp-Damper & Pulley
| 11***71 | Fastener Group-Damper & Pulley | 1 |
| 15***58 | Gear Crankshaft; (68 Teeth) | 1 |
| 16***84 | Bearing-Sleeve | 1 |
252-6185 Flywheel Gp
| 15***58 | Gear Crankshaft; (68 Teeth) | 1 |
| 16***84 | Bearing-Sleeve | 1 |
| 1W***38 | Bearing-Sleeve | 1 |
222-3088 Gear Gp-Front
| 10***34 | Cover | 1 |
| 14***95 | Plug As | 2 |
| 14***05 | Plug As-Sto | 1 |
261-3231 Gear Gp-Rear
| 10***34 | Cover | 1 |
| 17***21 | Cover | 1 |
| 19***57 | Bolt | 4 |
277-5425 Gear Gp-Rear
| 11***01 | Seal (Rear Pump To Center Pump) | 1 |
| 16***66 | Seal Group-Crankshaft; (Front) | 1 |
| 22***73 | Seal-Ring; (Crankshaft) | 1 |
277-4435 Housing Gp-Flywheel
| 10***53 | Bolt; (M30x3.5x150-mm) | 2 |
| 14***80 | Washer; (32x155x4-mm Thk) | 2 |
| 17***27 | Mount As | 2 |
238-2949 Housing Gp-Flywheel
| 22***40 | Eye-Lifting | 2 |
| 23***49 | Housing Group-Flywheel | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 8 |
218-7272 Housing Gp-Front
| 12***64 | Stud; (M12x1.75x86.3-mm Oal) | 2 |
| 21***72 | Housing Group-Front | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 2 |
237-4376 Lifter Gp-Valve -Mechanism
| 11***36 | Seal; (124.5-cm Each) | 0 |
| 19***78 | Washer-Hard; (13.5x30x12-mm Thk) | 8 |
| 23***76 | Lifter Group-Valve; -Mechanism | 1 |
224-0880 Lifting Gp-Engine
| 22***80 | Lifting Group-Engine | 1 |
| 23***77 | Stud As; (Rocker Arm) | 6 |
249-7326 Mounting Gp-Engine & Xmsn
| 24***47 | Bolt; (M12-1.75x93-mm Thd) | 6 |
| 24***26 | Mounting Group-Engine & Xmsn | 1 |
219-7440 Mounting Gp-Fan Drive
| 06***58 | Seal-O-Ring; (Oil Pan Drain Plug) | 2 |
| 21***43 | Elbow | 1 |
| 21***46 | Bell As-Suction | 1 |
249-7368 Mounting Gp-Fan Drive
| 11***72 | Bearing-Connecting Rod | 1 |
| 11***73 | Bolt-Connecting Rod | 2 |
| 11***89 | Bearing-Connecting Rod; (Standard) | 1 |
229-8083 Mounting Gp-Valve Mechanism
| 22***83 | Mounting Group-Valve Mechanism | 1 |
| 3B***23 | Core Plug--Flywheel Housing Pinion Shaft Hole | 1 |
229-8084 Mounting Gp-Valve Mechanism
| 22***84 | Mounting Group-Valve Mechanism | 1 |
| 6V***48 | Seal--O-Ring--To Governor Drive Housing | 1 |
| 9S***82 | Plug-O-Ring; (Straight Thread O-Ring) | 1 |
240-3279 Pan Gp-Oil -Engine
| 18***07 | Plug As; (Hi Tempertature) | 2 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
| 23***80 | Seal-O-Ring | 1 |
261-1506 Piston & Rod Gp
| 18***65 | Screw-Adjustment; (M10x1.5-Thd) | 1 |
| 24***60 | Rocker Arm As; (Inlet) | 1 |
| 26***06 | Piston & Rod Group | 1 |
238-2723 Piston & Rod Gp
| 23***23 | Piston & Rod Group | 1 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
| 6V***51 | Seal-O-Ring (Id=19.18mm) | 1 |
117-0165 Plug Gp-Cylinder Block -Oil Gallery, End
| 11***65 | Plug Group-Cylinder Block; -Oil Gallery, End | 1 |
| 18***65 | Screw-Adjustment; (M10x1.5-Thd) | 1 |
| 24***62 | Rocker Arm As; (Exhaust) | 1 |
223-3875 Plug Gp-Cylinder Block
| 22***75 | Plug Group-Cylinder Block; (Cylinder Block) | 1 |
| 22***18 | Shaft As | 1 |
| 24***61 | Rocker Arm Group; -Inlet | 2 |
227-9545 Plug Gp-Cylinder Block -Oil Gallery, Rh
| 22***45 | Plug Group-Cylinder Block; -Oil Gallery, Rh | 1 |
| 22***79 | Screw-Adjustment | 1 |
| 24***44 | Rocker Arm As; (Unit Injector) | 1 |
238-8962 Plug Gp-Engine
| 23***62 | Plug Group-Engine | 1 |
| 24***95 | Nut-Hex Thin; (M12x1.5-Thd) | 1 |
| 25***21 | Button | 1 |
207-8103 Pulley Gp-Crankshaft
| 20***03 | Pulley Group-Crankshaft | 1 |
| 22***18 | Shaft As | 1 |
| 24***47 | Bolt; (M12-1.75x93-mm Thd) | 2 |
260-0252 Rocker Arm Gp
| 26***52 | Rocker Arm Group | 1 |
| 29***19 | Plate | 1 |
| 29***44 | Plate As | 1 |
261-2294 Rocker Arm Gp -Exhaust
| 23***76 | Lifter Group-Valve; -Mechanism | 1 |
| 23***53 | Bridge-Valve | 12 |
| 26***52 | Rocker Arm Group | 3 |
261-2290 Rocker Arm Gp -Inlet
| 22***17 | Pushrod; (Injector) | 6 |
| 23***76 | Lifter Group-Valve; -Mechanism | 1 |
| 23***69 | Pushrod-Valve | 12 |
260-0251 Rocker Arm Gp -Unit Injector
| 26***51 | Rocker Arm Group; -Unit Injector | 1 |
| 26***65 | Insulation | 2 |
| 26***67 | Insulation | 1 |
241-0845 Rocker Arm Gp -Unit Injector
| 24***45 | Rocker Arm Group; -Unit Injector | 1 |
| 25***12 | Support | 1 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 8 |
240-8463 Rocker Arm Gp -Exhaust
| 24***63 | Rocker Arm Group; -Exhaust | 1 |
| 26***24 | Screw-Valve Adjustment; (M10x1.5-Thd) | 1 |
| 26***93 | Rocker Arm As; (Exhaust) | 1 |
241-0835 Rocker Arm Gp
| 10***21 | Seal Group-Crankshaft | 1 |
| 10***80 | Seal-O-Ring (Id=177.17mm) | 1 |
| 24***35 | Rocker Arm Group | 1 |
240-8461 Rocker Arm Gp -Inlet
| 24***61 | Rocker Arm Group; -Inlet | 1 |
| 26***24 | Screw-Valve Adjustment; (M10x1.5-Thd) | 1 |
| 26***91 | Rocker Arm As; (Inlet) | 1 |
227-0838 Seal Gp-Crankshaft -Rear
| 1A***70 | Spring; (Retainer) | 1 |
| 22***05 | Valve As; (Oil Pump Bypass)(Engine Oil) | 1 |
| 22***38 | Seal Group-Crankshaft; -Rear | 1 |
250-7017 Support Gp-Engine
| 13***45 | Bolt-Hex Head; (M10x1.50x30) | 6 |
| 22***92 | Gasket | 1 |
| 24***64 | Base Group-Oil Filter; -Engine | 1 |
276-3165 Suppression Gp-Sound -Rear Frame
| 27***65 | Suppression Group-Sound; -Rear Frame | 1 |
| 8T***75 | Bolt; (M6x1x50-mm) | 4 |
| 9X***67 | Washer; (6.6x12x2-mm Thk) | 4 |
240-7272 Valve Mechanism Gp
| 22***34 | Spacer | 1 |
| 24***72 | Valve Mechanism Group | 1 |
| 6V***59 | Bolt; (M6x1x70-mm) | 4 |
Braking System
357-1088 Accumulator & Mtg Gp-Brake
| 09***83 | Nut-Self-Locking; (M10x1.50 Thd) | 10 |
| 10***36 | Clip | 2 |
| 10***86 | Sleeve | 1 |
357-1089 Accumulator Gp-Brake -Brake Accumulator Charge
| 11***66 | Connector As-Orifice; (1.6-mm) | 1 |
| 13***53 | Union | 1 |
| 13***34 | Spacer; (11x20x25-mm Thk) | 1 |
348-9259 Accumulator Gp-Brake -Uncharged
| 11***66 | Connector As-Orifice; (1.6-mm) | 1 |
| 13***34 | Spacer; (11x20x25-mm Thk) | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
260-9428 Accumulator Gp-Brake -Charged
| 11***66 | Connector As-Orifice; (1.6-mm) | 1 |
| 13***34 | Spacer; (11x20x25-mm Thk) | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
348-9263 Accumulator Gp-Brake -Charged
| 11***66 | Connector As-Orifice; (1.6-mm) | 1 |
| 13***34 | Spacer; (11x20x25-mm Thk) | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
253-8427 Brake Gp-Parking
| 09***83 | Nut-Self-Locking; (M10x1.50 Thd) | 10 |
| 10***36 | Clip | 2 |
| 10***11 | Clamp | 4 |
265-8942 Control Gp-Service Brake
| 10***07 | Hose As | 1 |
| 14***58 | Elbow As | 1 |
| 14***72 | Elbow Group | 1 |
356-2953 Control Gp-Service Brake
| 10***07 | Hose As | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 2 |
| 35***53 | Control Group-Service Brake | 1 |
249-4080 Control Gp-Service Brake
| 14***22 | Adapter; (-10orb/-12orfs) | 2 |
| 14***28 | Connector Assem. | 1 |
| 14***39 | Connector As. | 1 |
283-7766 Lines Gp-Service Brake
| 10***67 | Fitting Group; (Union) | 2 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 2 |
| 15***02 | Adapter As | 2 |
356-2976 Lines Gp-Service Brake
| 09***83 | Nut-Self-Locking; (M10x1.50 Thd) | 34 |
| 09***59 | Bolt; (M14x2x60-mm) | 4 |
| 12***08 | Hose-Hydraulic; (21.3-Inches) | 0 |
Cooling System
231-0152 Cooler Gp-Engine Oil
| 23***52 | Cooler Group-Engine Oil | 1 |
| 26***13 | Strip | 1 |
| 27***56 | Strip | 1 |
249-7363 Cooling Ar
| 22***61 | Seal; (Temperature Regulator Housing) | 1 |
| 22***75 | Seal; (Temperature Regulator Housing) | 1 |
| 23***03 | Bolt; (M8x1.25x90-mm) | 4 |
249-7366 Fan & Motor Gp -Hydraulic
| 13***00 | Spacer; (11x25x50-mm Thk) | 1 |
| 15***25 | Valve-Fluid Sampling | 1 |
| 15***70 | Cap-Dust; (Engine Coolant) | 1 |
274-1691 Guard Gp-Fan -Lower
| 20***81 | Bolt-Flange Head; (M8x1.25x20-mm) | 4 |
| 22***47 | Pump Group-Water | 1 |
| 22***03 | Seal-O-Ring | 1 |
263-4007 Guard Gp-Fan
| 12***17 | Seal Group; (Water Pump) | 1 |
| 17***94 | Washer | 1 |
| 1B***67 | Ball Bearing | 2 |
255-2396 Lines Gp-Water -Pump Housing
| 20***81 | Bolt-Flange Head; (M8x1.25x20-mm) | 4 |
| 22***03 | Seal-O-Ring | 1 |
| 22***10 | Cover | 1 |
243-1667 Lines Gp-Water -Single Water Regulator
| 22***11 | Pump Group-Water | 1 |
| 24***67 | Lines Group-Water; -Single Water Regulator | 1 |
| 6V***39 | Washer-Hard-Alt Strap To Fan Drive Belt | 2 |
319-5079 Lines Gp-Water
| 12***17 | Seal Group; (Water Pump) | 1 |
| 1B***67 | Ball Bearing | 2 |
| 20***31 | Plug-Cup | 1 |
249-7325 Lines Gp-Water
| 24***25 | Lines Group-Water | 1 |
| 29***52 | Pump Group-Water | 1 |
| 6V***39 | Washer-Hard-Alt Strap To Fan Drive Belt | 2 |
228-5812 Pump Gp-Water
| 09***49 | Bolt; (M8x1.25x40-mm) | 4 |
| 13***60 | Clamp-Hose | 3 |
| 13***61 | Clamp | 1 |
223-9147 Pump Gp-Water
| 12***07 | Mount As-Resilient | 1 |
| 17***81 | Washer-Hard; (8.5x40x3-mm Thk) | 1 |
| 22***47 | Pump Group-Water | 1 |
292-9252 Pump Gp-Water
| 09***49 | Bolt; (M8x1.25x40-mm) | 2 |
| 22***26 | Clamp | 1 |
| 23***26 | Clamp | 1 |
228-5811 Pump Gp-Water
| 13***61 | Boss | 1 |
| 13***29 | Clip | 3 |
| 15***26 | Elbow As | 2 |
293-0818 Pump Gp-Water
| 24***18 | Filter Element As-Air; (Primary) | 1 |
| 24***19 | Filter Element As-Air; (Secondary) | 1 |
| 24***17 | Bracket As | 2 |
249-7367 Radiator Gp
| 12***29 | Clamp; (V-Band) | 1 |
| 12***00 | Adapter | 1 |
| 13***29 | Clip | 2 |
257-7500 Tank Gp-Coolant
| 12***29 | Clamp; (V-Band) | 1 |
| 12***00 | Adapter | 1 |
| 13***29 | Clip | 2 |
Electrical And Starting System
3e-6328 Alarm Gp -Action
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 2 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 22***09 | Screw-Truss Head; (M4x0.7x14-mm) | 3 |
275-9651 Application Gp-Communication -Product Link 300
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 27***51 | Application Group-Communication; -Product Link 300 | 1 |
257-8027 Battery Gp -Extreme-Duty
| 25***27 | Battery Group; -Extreme-Duty | 1 |
| 30***87 | Control Group-Unprogrammed; (Transmission) | 1 |
272-2286 Bracket Gp-Mounting -Mast
| 27***86 | Bracket Group-Mounting; -Mast | 1 |
| 30***87 | Control Group-Unprogrammed; (Transmission) | 1 |
305-0036 Cable Gp-Starting Motor
| 17***31 | Screw; (Truss Head) (M4x0.7x12mm) | 4 |
| 18***79 | Converter-Power; (20-Ampere)(24-Volt To 12-Volt) | 1 |
| 30***36 | Cable Group-Starting Motor | 1 |
279-3360 Camera Ar
| 11***11 | Socket-Auxiliary Power; (12-Volt)(Power Port) | 1 |
| 16***76 | Film; (Identification) (12v) (On Rear Console Behind Operators Seat) | 1 |
| 17***31 | Screw; (Truss Head) (M4x0.7x12mm) | 4 |
241-7601 Connection Gp-Electrical
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 24***01 | Connection Group-Electrical; -Ground | 1 |
233-6191 Control & Mtg Gp-Engine Elek
| 12***74 | Screw-Pan Head; (8-32x9.52-mm) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 23***91 | Control & Mtg Group-Engine Elek | 1 |
233-3145 Control & Mtg Gp-Implement
| 23***45 | Control & Mtg Group-Implement | 1 |
| 34***67 | Software Group-Implement | 1 |
| 34***88 | Service Group-Implement | 1 |
226-7473 Control Gp-Engine Electronic
| 22***73 | Control Group-Engine Electronic | 1 |
| 34***67 | Software Group-Implement | 1 |
| 34***88 | Service Group-Implement | 1 |
299-0876 Control Gp-Implement
| 29***76 | Control Group-Implement; -Front Lift, Ripper-Front Lift, Scarifier-Front Lift, Dozer Angle | 1 |
| 35***16 | Software Group-Monitor; (Messenger) | 1 |
| 35***17 | Service Group-Monitor | 1 |
239-9954 Control Gp-Unprogrammed -Product Link 300
| 23***54 | Control Group-Unprogrammed; (Product Link 300)(Product Link 321sr) | 1 |
| 30***69 | Control Group-Unprgmed Monitor; -Messenger | 1 |
275-8969 Control Gp-Unprogrammed -Implement 2
| 27***69 | Control Group-Unprogrammed; -Implement 2 | 1 |
| 35***18 | Software Group-Monitor | 1 |
| 35***19 | Service Group-Monitor | 1 |
275-8970 Control Gp-Unprogrammed -Implement 1
| 27***70 | Control Group-Unprogrammed; -Implement 1 | 1 |
| 35***20 | Software Group-Monitor | 1 |
| 35***21 | Service Group-Monitor | 1 |
233-3134 Converter Gp-Electrical -Radio
| 23***34 | Converter Group-Electrical; -Radio | 1 |
| 35***22 | Software Group-Monitor | 1 |
| 35***23 | Service Group-Monitor | 1 |
233-3135 Converter Gp-Electrical
| 23***35 | Converter Group-Electrical | 1 |
| 35***24 | Software Group-Monitor | 1 |
| 35***25 | Service Group-Monitor | 1 |
262-2043 Electronics Gp-Communication -Product Link 300
| 25***95 | Wiring Group-Grade Control | 1 |
| 26***43 | Electronics Group-Communication; -Product Link 300 | 1 |
| 30***97 | Grade Control Group; -Accugrade | 1 |
262-1421 Electronics Gp-Communication -Product Link 300
| 26***21 | Electronics Group-Communication; -Product Link 300 | 1 |
| 35***19 | Software Group-Power Train | 1 |
| 35***20 | Service Group-Power Train | 1 |
250-9258 Electronics Gp-Implement -Implement 2
| 22***33 | Mast Group; -Laser Receiver | 1 |
| 23***49 | Cable-Coiled; (Mast) | 1 |
| 23***70 | Mounting Group-Receiver; -Mast | 1 |
250-9259 Electronics Gp-Implement -Implement 3
| 24***03 | Panel Group-Control; -Lh | 1 |
| 24***04 | Panel Group-Control; -Rh | 1 |
| 25***59 | Electronics Group-Implement; -Implement 3 | 1 |
250-9257 Electronics Gp-Implement
| 25***57 | Electronics Group-Implement | 1 |
| 26***17 | Sensor Ar-Grade | 1 |
| 29***80 | Display Ar-Monitor; -Cd610 | 1 |
302-0361 Electronics Gp-Monitor -Arabic, Chinese, English, Portuguese, Russian
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***74 | Cover-Connector; (Wire Router) | 1 |
| 15***55 | Kit; (Connecting Plug) (12-Pin) (Includes Plug As Wedge & Interface Seal) | 1 |
275-9650 Electronics Gp-Monitor -Messenger
| 27***50 | Electronics Group-Monitor; -Messenger | 1 |
| 28***60 | Power Supply Group; -Grade Control | 1 |
| 31***23 | Panel Group-Control; -Accugrade, Lh | 1 |
302-0360 Electronics Gp-Monitor -English, Greek, Hebrew, Italian, Portuguese, Turkish
| 13***17 | Cap As-Dust | 1 |
| 23***42 | Element As-Jacket Water Heater; (120-Volt, 1250-Watt) | 1 |
| 30***60 | Electronics Group-Monitor; -English, Greek, Hebrew, Italian, Portuguese, Turkish | 1 |
302-0359 Electronics Gp-Monitor -Danish, English, Finnish, Norwegian, Portuguese, Swedish
| 12***09 | Cord As-Heater Element; -240-Volt | 1 |
| 13***17 | Cap As-Dust | 1 |
| 24***08 | Element As-Jacket Water Heater; (240-Volt, 1250-Watt) | 1 |
302-0362 Electronics Gp-Monitor -English, Portuguese, Romanian, Slovenian
| 25***47 | Grommet | 1 |
| 26***53 | Film-Warning; (Product Link, Read Omm) | 1 |
| 26***91 | Harness As-Power; (Product Link Radio) | 1 |
250-9254 Electronics Gp-Monitor -Dutch, English, French, German, Portuguese, Spanish
| 24***03 | Panel Group-Control; -Lh | 1 |
| 25***54 | Electronics Group-Monitor; -Dutch, English, French, German, Portuguese, Spanish | 1 |
| 28***60 | Power Supply Group; -Grade Control | 1 |
310-3221 Electronics Gp-Power Train
| 23***26 | Lamp Group-Flood; -Low | 2 |
| 28***19 | Switch As-Rocker; (24-Volt) | 1 |
| 29***16 | Mounting Group-Lamp | 1 |
323-8140 Grade Control Ar -Cd610
| 13***00 | Clip; (Tab) | 1 |
| 23***95 | Bracket As | 1 |
| 23***36 | Switch As-Rocker; (Warning Beacon)(24-Volt, Rotating Beacon) | 1 |
261-0117 Grade Control Ar -Accugrade
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
317-6526 Grade Control Ar-Laser -Advanced Tracking System
| 23***36 | Switch As-Rocker; (Warning Beacon)(24-Volt, Rotating Beacon) | 1 |
| 28***57 | Lamp Group-Warning Beacon; -Amber, Strobe | 1 |
| 31***88 | Plate As | 1 |
307-0155 Grade Control Gp -Accugrade
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 26***46 | Lens | 1 |
302-9097 Grade Control Gp -Accugrade
| 23***36 | Switch As-Rocker; (Warning Beacon)(24-Volt, Rotating Beacon) | 1 |
| 30***97 | Grade Control Group; -Accugrade | 1 |
| 31***88 | Plate As | 1 |
249-5511 Heater Gp-Jacket Water
| 15***50 | Body As-Lamp | 1 |
| 15***52 | Bezel | 1 |
| 18***49 | Clamp | 2 |
249-5516 Heater Gp-Jacket Water
| 15***50 | Body As-Lamp | 1 |
| 15***52 | Bezel | 1 |
| 18***49 | Clamp | 2 |
235-6188 Installation Ar-Communication -Product Link 321sr
| 12***27 | Screw-Pan Head; (M3x0.5x16-mm) | 4 |
| 15***54 | Bolt; (M10x1.5x40-mm) | 1 |
| 20***38 | Lamp-Halogen; (12/24-Volt, 35-Watt) | 1 |
313-6837 Installation Gp-Communication -Product Link
| 12***27 | Screw-Pan Head; (M3x0.5x16-mm) | 4 |
| 20***38 | Lamp-Halogen; (12/24-Volt, 35-Watt) | 1 |
| 22***69 | Lens As; (Floodlight) | 1 |
233-3126 Installation Gp-Lighting
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 17***91 | Bracket Assem. | 1 |
| 17***92 | Body Assem. | 1 |
238-8827 Installation Gp-Security
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 17***91 | Bracket Assem. | 1 |
| 17***92 | Body Assem. | 1 |
233-3127 Installation Gp-Warning Beacon
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 20***11 | Lens As | 1 |
| 23***27 | Installation Group-Warning Beacon | 1 |
310-2078 Installation Gp-Warning Beacon
| 12***27 | Screw-Pan Head; (M3x0.5x16-mm) | 4 |
| 22***74 | Bezel; (Hid) | 1 |
| 27***82 | Lens As; (Hid) | 1 |
261-1502 Lamp Gp
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 17***92 | Body Assem. | 1 |
| 20***14 | Lens As; (Floodlight) | 1 |
3e-6389 Lamp Gp-Dome -With Switch
| 22***74 | Bezel; (Hid) | 1 |
| 29***60 | Lamp; (24-Volt, Hid) | 1 |
| 29***39 | Bracket | 1 |
153-2073 Lamp Gp-Flood
| 15***73 | Lamp Group-Flood; -Cab-Extended Bolster-Rear-Blade-Moldboard | 1 |
| 22***74 | Bezel; (Hid) | 1 |
| 29***60 | Lamp; (24-Volt, Hid) | 1 |
210-8423 Lamp Gp-Flood -24-Volt, 35-Watt, Hid
| 12***27 | Screw-Pan Head; (M3x0.5x16-mm) | 4 |
| 15***54 | Bolt; (M10x1.5x40-mm) | 1 |
| 20***38 | Lamp-Halogen; (12/24-Volt, 35-Watt) | 1 |
234-4326 Lamp Gp-Flood
| 10***53 | Case, Spacer; (Spherical) | 1 |
| 10***54 | Spacer; (Spherical) | 1 |
| 10***55 | Washer; (Spherical) | 2 |
219-6486 Lamp Gp-Flood
| 12***27 | Screw-Pan Head; (M3x0.5x16-mm) | 4 |
| 20***38 | Lamp-Halogen; (12/24-Volt, 35-Watt) | 1 |
| 21***86 | Lamp Group-Flood | 1 |
315-1251 Lamp Gp-Flood -Cab Roof, Rear
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 31***51 | Lamp Group-Flood; -Cab Roof, Rear | 1 |
319-7381 Lamp Gp-Flood -Hid
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 31***81 | Lamp Group-Flood; -Hid | 1 |
283-8144 Lamp Gp-Flood -Hid
| 10***53 | Case, Spacer; (Spherical) | 1 |
| 10***54 | Spacer; (Spherical) | 1 |
| 10***55 | Washer; (Spherical) | 1 |
319-7380 Lamp Gp-Flood -Hid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 31***80 | Lamp Group-Flood; -Hid | 1 |
319-7379 Lamp Gp-Flood -Hid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 31***79 | Lamp Group-Flood; -Hid | 1 |
283-8145 Lamp Gp-Flood -Hid
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 28***45 | Lamp Group-Flood; -24-Volt, 35-Watt, Hid-Cab Guard | 1 |
147-0319 Lamp Gp-Flood
| 14***19 | Lamp Group-Flood; -Engine Work, Rh, Lh | 1 |
| 22***74 | Bezel; (Hid) | 1 |
| 29***60 | Lamp; (24-Volt, Hid) | 1 |
219-6488 Lamp Gp-Flood
| 21***88 | Lamp Group-Flood; -Cab Roof, Front | 1 |
| 30***29 | Bracket-Light | 1 |
| 3E***54 | Bolt; (M8x1.25x20-mm) | 1 |
290-5749 Lamp Gp-Head
| 11***17 | Bracket | 1 |
| 14***88 | Bracket As | 2 |
| 15***73 | Lamp Group-Flood; -Cab-Extended Bolster-Rear-Blade-Moldboard | 2 |
161-3509 Lamp Gp-Head -Low Beam
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***09 | Lamp Group-Head; -Low Beam | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
210-8425 Lamp Gp-Head -Low Beam
| 13***00 | Clip; (Tab) | 2 |
| 21***25 | Lamp Group-Head; -Low Beam | 1 |
| 24***52 | Bracket As | 2 |
259-9287 Lamp Gp-Head & Signal -Lh
| 14***88 | Bracket As | 2 |
| 15***73 | Lamp Group-Flood; -Cab-Extended Bolster-Rear-Blade-Moldboard | 2 |
| 25***87 | Lamp Group-Head & Signal; -Lh | 1 |
259-9288 Lamp Gp-Head & Signal -Rh
| 21***23 | Lamp Group-Flood; -24-Volt, 35-Watt, Hid | 2 |
| 25***88 | Lamp Group-Head & Signal; -Rh | 1 |
| 26***64 | Bracket; (Rh) | 1 |
344-3460 Lamp Gp-Head & Signal -Lh
| 13***00 | Clip; (Tab) | 2 |
| 28***44 | Lamp Group-Flood; -Hid-Boom | 2 |
| 34***60 | Lamp Group-Head & Signal; -Lh | 1 |
344-3459 Lamp Gp-Head & Signal -Rh
| 21***23 | Lamp Group-Flood; -24-Volt, 35-Watt, Hid | 2 |
| 34***59 | Lamp Group-Head & Signal; -Rh | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 2 |
135-0426 Lamp Gp-Signal -Stop, Tail
| 09***41 | Grommet | 2 |
| 13***26 | Lamp Group-Signal; (24-Volt, Stop, Tail)(Stop/Tail) | 1 |
| 14***88 | Bracket As | 2 |
334-5410 Lamp Gp-Signal -Turn
| 21***23 | Lamp Group-Flood; -24-Volt, 35-Watt, Hid | 2 |
| 24***52 | Bracket As | 2 |
| 33***10 | Lamp Group-Signal; -Turn | 1 |
201-5464 Lamp Gp-Signal -Turn
| 11***17 | Bracket | 1 |
| 13***34 | Spacer; (11x20x25-mm Thk) | 2 |
| 14***88 | Bracket As | 2 |
334-8049 Lamp Gp-Signal -Stop, Tail
| 13***00 | Clip; (Tab) | 2 |
| 24***52 | Bracket As | 2 |
| 28***44 | Lamp Group-Flood; -Hid-Boom | 2 |
199-3368 Lamp Gp-Signal
| 09***41 | Grommet | 2 |
| 13***00 | Clip; (Tab) | 2 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
284-3757 Lamp Gp-Warning Beacon -Amber, Strobe
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 21***25 | Lamp Group-Head; -Low Beam | 2 |
338-1132 Lamp Gp-Warning Beacon -Amber, Strobe
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 13***00 | Clip; (Tab) | 2 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
235-3937 Lamp Gp-Warning Beacon -Amber, Rotating
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***88 | Bracket As | 2 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
260-1905 Lighting Gp-Flood -Blade
| 21***86 | Lamp Group-Flood | 2 |
| 23***26 | Lamp Group-Flood; -Low | 2 |
| 26***05 | Lighting Group-Flood; -Blade | 1 |
261-0134 Lighting Gp-Flood -Toe
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 26***34 | Lighting Group-Flood; -Toe | 1 |
| 9W***52 | Pin-Connector; (14-Ga To 16-Ga) | 2 |
261-0133 Lighting Gp-Flood
| 24***02 | Riser; (Angle) | 1 |
| 26***33 | Lighting Group-Flood | 1 |
| 27***73 | Mast As; (Grade Control) | 1 |
291-4038 Lighting Gp-Flood -Cab Roof
| 23***32 | Mount-Flexible | 4 |
| 23***33 | Gasket | 2 |
| 23***34 | Clamp | 1 |
260-1906 Lighting Gp-Flood
| 24***80 | Switch As-Rocker; (Side Floodlight) | 1 |
| 26***06 | Lighting Group-Flood | 1 |
| 31***79 | Lamp Group-Flood; -Hid | 2 |
261-0136 Lighting Gp-Flood -Hid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 13***00 | Clip; (Tab) | 2 |
261-0135 Lighting Gp-Flood
| 11***58 | Washer; (6.5x17x1-mm Thk) | 1 |
| 26***35 | Lighting Group-Flood | 1 |
| 29***15 | Plate As | 1 |
260-1907 Lighting Gp-Flood -Side
| 24***47 | Kit-Adapter; (Mast)(Grade Control) | 1 |
| 25***79 | Screw As | 1 |
| 25***80 | Motor As | 1 |
261-0137 Lighting Gp-Flood
| 23***52 | Film-Warning; (Laser Transmitter) | 3 |
| 25***44 | Film-Warning; (Blade, Do Not Climb, Read Omm) | 1 |
| 26***37 | Lighting Group-Flood | 1 |
250-1097 Lighting Gp-Flood
| 14***88 | Bracket As | 2 |
| 14***19 | Lamp Group-Flood; -Engine Work, Rh, Lh | 2 |
| 25***97 | Lighting Group-Flood | 1 |
291-4039 Lighting Gp-Flood -Cab
| 22***69 | Module As-Power Supply | 1 |
| 29***39 | Lighting Group-Flood; -Hid | 1 |
| 8T***89 | Bolt (20mm Long) 0 Degrees); (L=20mm) {For 5br, 6cr} | 4 |
260-1908 Lighting Gp-Flood
| 22***33 | Mast Group; -Laser Receiver | 1 |
| 23***70 | Mounting Group-Receiver; -Mast | 1 |
| 26***08 | Lighting Group-Flood | 1 |
298-0603 Lighting Gp-Roading -Snow Removal
| 23***87 | Case-Plastic | 1 |
| 29***81 | Mast Group; -Laser Receiver | 1 |
| 29***85 | Receiver Group-Laser; -Accugrade, Dual | 1 |
298-0602 Lighting Gp-Roading
| 29***02 | Lighting Group-Roading | 1 |
| 33***66 | Software Group-Communication; (Product Link 121sr) | 1 |
292-0907 Mast Gp -Satellite Receiver
| 28***37 | Receiver Group-Satellite; -Dual Gps, Ms980-Accugrade | 1 |
| 29***07 | Mast Group; -Satellite Receiver | 3 |
226-2333 Mast Gp -Laser Receiver
| 22***33 | Mast Group; -Laser Receiver | 3 |
| 23***49 | Cable-Coiled; (Mast) | 2 |
| 23***70 | Mounting Group-Receiver; -Mast | 2 |
292-0281 Mast Gp -Laser Receiver
| 28***36 | Receiver Group-Satellite; -Single Gps, Ms980-Accugrade | 1 |
| 29***81 | Mast Group; -Laser Receiver | 1 |
| 29***07 | Mast Group; -Satellite Receiver | 1 |
117-3915 Motor Gp-Electric -Secondary Steering
| 11***15 | Motor Group-Electric; -Engine Prelubrication-Sec Steering, Brake Release | 1 |
| 24***02 | Riser; (Angle) | 1 |
| 27***73 | Mast As; (Grade Control) | 1 |
170-5335 Motor Gp-Electric -Circulating Fan
| 17***35 | Motor Group-Electric; -Circulating Fan | 1 |
| 24***02 | Riser; (Angle) | 1 |
| 27***73 | Mast As; (Grade Control) | 1 |
290-2016 Mounting Gp-Lamp
| 27***64 | Cable-Coiled; (Laser Receiver) | 1 |
| 29***16 | Mounting Group-Lamp | 1 |
| 34***59 | Receiver As-Laser | 1 |
260-1910 Mounting Gp-Lighting
| 11***93 | Lockwasher | 5 |
| 24***17 | Receiver As-Satellite; (Gps, Ms980) | 2 |
| 25***28 | Mounting Group-Receiver; -Target | 2 |
260-1909 Mounting Gp-Lighting -Snow Removal
| 11***93 | Lockwasher | 5 |
| 24***17 | Receiver As-Satellite; (Gps, Ms980) | 1 |
| 25***28 | Mounting Group-Receiver; -Target | 1 |
292-0302 Mounting Gp-Mast -Laser Receiver
| 11***93 | Lockwasher | 5 |
| 25***28 | Mounting Group-Receiver; -Target | 2 |
| 25***39 | Case-Plastic; (Receiver) | 1 |
292-0908 Mounting Gp-Mast -Laser Receiver
| 11***93 | Lockwasher | 5 |
| 25***28 | Mounting Group-Receiver; -Target | 1 |
| 25***39 | Case-Plastic; (Receiver) | 1 |
234-9970 Mounting Gp-Receiver -Mast
| 23***70 | Mounting Group-Receiver; -Mast | 1 |
| 29***13 | Receiver As-Satellite; (Gnss, Ms990) | 1 |
283-7960 Power Supply Gp -Grade Control
| 24***14 | Sensor Group-Position; (Blade Rotation) | 1 |
| 25***72 | Kit-Bracket | 1 |
| 25***41 | Bracket As-Sensor | 1 |
263-9088 Radio Gp-Communication -Product Link 121sr
| 09***37 | Spacer; (12-mm Thk) | 4 |
| 11***58 | Bearing | 4 |
| 12***08 | Spring | 2 |
336-3545 Radio Gp-Communication -Product Link 121sr
| 11***18 | Clip | 1 |
| 13***00 | Clip; (Tab) | 1 |
| 16***43 | Sensor Group-Position; -Brake Pedal | 2 |
292-0310 Receiver Ar-Laser -Accugrade, Dual
| 06***65 | Bolt; (1/2-13x1.25-In) | 2 |
| 18***59 | Clip | 1 |
| 24***89 | Sensor & Mounting Group; -Cross Slope | 1 |
292-0301 Receiver Ar-Laser -Accugrade, Single
| 11***18 | Clip | 1 |
| 13***00 | Clip; (Tab) | 1 |
| 16***90 | Block As-Mounting | 2 |
292-7971 Receiver Ar-Satellite -Accugrade, Single Gnss, Ms992
| 06***65 | Bolt; (1/2-13x1.25-In) | 2 |
| 18***59 | Clip | 1 |
| 24***02 | Riser; (Angle) | 2 |
292-0315 Receiver Ar-Satellite -Dual Gps, Ms980-Accugrade
| 24***84 | Fastener Group-Sensor; -Sonic | 2 |
| 24***93 | Case-Plastic | 1 |
| 24***92 | Sensor Group-Sonic | 2 |
292-7972 Receiver Ar-Satellite -Accugrade, Dual Gnss, Ms992
| 16***09 | Elbow | 1 |
| 19***91 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
| 19***92 | Sensor Group-Temperature; -Coolant, Water | 1 |
292-0314 Receiver Ar-Satellite -Single Gps, Ms980
| 24***84 | Fastener Group-Sensor; -Sonic | 2 |
| 24***93 | Case-Plastic | 1 |
| 24***92 | Sensor Group-Sonic | 1 |
292-0285 Receiver Gp-Laser -Accugrade, Dual
| 16***09 | Elbow | 1 |
| 23***49 | Sensor Group-Speed; -Crankshaft Speed-Timing, Crankshaft | 1 |
| 23***55 | Adapter-O-Ring | 1 |
286-0136 Receiver Gp-Satellite -Single Gps, Ms980-Accugrade
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 28***36 | Receiver Group-Satellite; -Single Gps, Ms980-Accugrade | 1 |
300-2118 Receiver Gp-Satellite -Accugrade, Upgrade From Gps To Gnss
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
| 30***18 | Receiver Group-Satellite; -Accugrade, Upgrade From Gps To Gnss | 1 |
292-0291 Receiver Gp-Satellite -Accugrade, Dual Gnss, Ms992
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 3 |
| 29***91 | Receiver Group-Satellite; -Accugrade, Dual Gnss, Ms992 | 1 |
292-0292 Receiver Gp-Satellite -Accugrade, Single Gnss, Ms992
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 3 |
| 29***92 | Receiver Group-Satellite; -Accugrade, Single Gnss, Ms992 | 1 |
286-0137 Receiver Gp-Satellite -Dual Gps, Ms980-Accugrade
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
| 28***37 | Receiver Group-Satellite; -Dual Gps, Ms980-Accugrade | 1 |
249-7789 Sensor & Mounting Gp
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 24***89 | Sensor & Mounting Group; -Cross Slope | 1 |
| 9X***13 | Sleeve (Order By cm)(Use As Required) | 0 |
287-6156 Sensor & Mtg Gp-Position
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 3 |
| 28***56 | Sensor & Mtg Group-Position | 1 |
276-8491 Sensor & Mtg Gp-Position -Variable Blade Float
| 19***22 | Sensor Group-Pressure; -Atmospheric Air | 1 |
| 27***91 | Sensor & Mtg Group-Position; -Variable Blade Float | 1 |
| 6V***49 | Seal-O-Ring (Id=11.89mm); (11.89-mm Id) | 1 |
262-2018 Sensor Ar-Grade -Single Sonic
| 09***36 | Pin-Cotter | 1 |
| 1B***78 | Nut,Plain,Hexagon Rod To Lever Uoc:Bsv,Bsx | 2 |
| 24***15 | Sensor As-Sonic; (St300) | 1 |
323-8139 Sensor Ar-Grade -Cd700
| 24***87 | Rod | 1 |
| 24***88 | Bracket Group-Mounting; -Sonic Sensor | 1 |
| 32***55 | Sensor Group-Sonic; -Single | 1 |
262-2019 Sensor Ar-Grade -Dual Sonic
| 24***87 | Rod | 2 |
| 24***88 | Bracket Group-Mounting; -Sonic Sensor | 2 |
| 26***19 | Sensor Ar-Grade; -Dual Sonic | 1 |
262-2017 Sensor Ar-Grade
| 21***66 | Seal-O-Ring; (Engine Oil) | 1 |
| 23***78 | Sensor Group-Pressure; -Air Inlet Manifold | 1 |
| 26***17 | Sensor Ar-Grade | 1 |
231-1975 Sensor Gp-Engine
| 23***75 | Sensor Group-Engine | 1 |
| 24***97 | Cable-Coiled; (Sensor) | 1 |
| 25***30 | Sensor As-Sonic; (St400) | 1 |
357-0523 Sensor Gp-Engine
| 13***60 | Bracket | 1 |
| 13***45 | Pad; (Connector) | 1 |
| 35***23 | Sensor Group-Engine | 1 |
266-1467 Sensor Gp-Position -Rotary
| 15***43 | Sleeve; (2.8-Dm) | 0 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 2 |
219-2392 Sensor Gp-Position
| 20***16 | Sensor Group-Speed; -Torque Converter Output | 1 |
| 21***92 | Sensor Group-Position | 1 |
| 22***47 | Seal-O-Ring | 1 |
160-2443 Sensor Gp-Position
| 16***43 | Sensor Group-Position; -Brake Pedal | 1 |
| 20***15 | Sensor Group-Speed; -Low Output | 1 |
| 22***47 | Seal-O-Ring | 1 |
276-9067 Sensor Gp-Pressure
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 1 |
| 1S***52 | Terminal-Cable; (00-Ga, 3/8-In Screw) | 1 |
| 20***56 | Starting Motor Group-Electric; (24-Volt) | 1 |
237-0957 Sensor Gp-Pressure
| 23***57 | Sensor Group-Pressure | 1 |
| 23***80 | Seal-O-Ring | 1 |
| 25***53 | Sensor As-Temperature; (Torque Converter Outlet Oil) | 1 |
249-0096 Sensor Gp-Pressure
| 0S***97 | Capscrew (1/4 - 28 Nf X 1 Gd8, Hex) | 5 |
| 24***96 | Sensor Group-Pressure; -Intake Air Manifold | 1 |
| 25***79 | Kit-Solenoid; (24-Volt)(Starting Motor) | 1 |
239-3478 Sensor Gp-Pressure
| 13***29 | Clip | 1 |
| 23***17 | Fitting As; (Ether Starting Aid) | 1 |
| 23***45 | Nut-Sleeve; (5/16-24-Thd) | 1 |
239-2395 Sensor Gp-Pressure
| 13***45 | Pad; (Connector) | 1 |
| 23***80 | Seal-O-Ring | 1 |
| 23***95 | Sensor Group-Pressure; -Atmospheric Air | 1 |
239-2396 Sensor Gp-Pressure
| 13***45 | Pad; (Connector) | 1 |
| 23***96 | Sensor Group-Pressure; -Engine Oil, Fuel | 1 |
| 26***97 | Sensor Group-Temperature; (Air Inlet Manifold) | 1 |
276-8548 Sensor Gp-Pressure
| 03***21 | Shim Lever Housing | 1 |
| 04***65 | Screw 19.05 mm(.750 In.) Long | 4 |
| 0S***97 | Capscrew (1/4 - 28 Nf X 1 Gd8, Hex) | 13 |
194-6722 Sensor Gp-Pressure
| 13***11 | Sensor Group-Temperature; (Transmission Lubrication Oil) | 1 |
| 13***45 | Pad; (Connector) | 1 |
| 19***22 | Sensor Group-Pressure; -Atmospheric Air | 1 |
194-6725 Sensor Gp-Pressure
| 13***11 | Sensor Group-Temperature; (Transmission Lubrication Oil) | 1 |
| 13***45 | Pad; (Connector) | 0 |
| 19***25 | Sensor Group-Pressure; -Engine Oil | 1 |
239-5674 Sensor Gp-Pressure
| 23***17 | Fitting As; (Ether Starting Aid) | 1 |
| 23***45 | Nut-Sleeve; (5/16-24-Thd) | 1 |
| 23***34 | Valve Group-Ether Starting | 1 |
286-0133 Sensor Gp-Sonic
| 28***33 | Sensor Group-Sonic; -Single | 1 |
| 29***40 | Starting Motor Group-Electric; -Cold Weather | 1 |
| 30***37 | Wiring Group-Rear | 1 |
249-7792 Sensor Gp-Sonic
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 1 |
| 1S***52 | Terminal-Cable; (00-Ga, 3/8-In Screw) | 1 |
| 22***71 | Bolt-12 Point Head; (M16x2x45-mm) | 3 |
286-0132 Sensor Gp-Sonic
| 24***16 | Starting Motor Group-Electric | 1 |
| 28***32 | Sensor Group-Sonic; -Dual | 1 |
| 30***36 | Cable Group-Starting Motor | 1 |
321-1455 Sensor Gp-Sonic
| 24***13 | Bar As; (Rh) | 1 |
| 24***14 | Bar As; (Lh) | 1 |
| 29***14 | Tube As | 1 |
321-1456 Sensor Gp-Sonic
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 32***56 | Sensor Group-Sonic; -Dual | 1 |
191-8303 Sensor Gp-Speed
| 19***03 | Sensor Group-Speed | 1 |
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
300-9806 Sensor Gp-Speed
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
230-7149 Sensor Gp-Speed
| 23***49 | Sensor Group-Speed; -Crankshaft Speed-Timing, Crankshaft | 1 |
| 24***88 | Switch As-Rocker; (Work Light) | 1 |
300-9805 Sensor Gp-Speed
| 17***08 | Switch Group-Magnetic; -24-Volt-Start Relay-Main Relay | 1 |
| 17***09 | Switch Group-Magnetic; -24-Volt-Start Relay | 1 |
| 30***05 | Sensor Group-Speed; -Primary, Timing | 1 |
239-2397 Sensor Gp-Speed
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***74 | Tube-Heat Shrink; (5.72-mm Dia)(950-cm) | 0 |
| 14***36 | Pin-Connector; (14-Ga To 18-Ga) | 3 |
274-7396 Sensor Gp-Temperature
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 24***78 | Switch As-Rocker; (Autoshift) | 1 |
| 25***99 | Lamp As-Led; (24-Volt, Green) | 1 |
197-8391 Sensor Gp-Temperature
| 19***91 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
| 1B***78 | Nut,Plain,Hexagon Rod To Lever Uoc:Bsv,Bsx | 2 |
| 4D***26 | Washer,Lock Starter Ground Cable, Internal And External Teeth | 2 |
234-5013 Sensor Gp-Temperature
| 23***13 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
| 23***16 | Switch As-Rocker; (Hazard) | 1 |
| 24***79 | Switch As-Rocker; (24-Volt)(Headlight Dimmer) | 1 |
191-6587 Sensor Gp-Temperature
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***81 | Switch As-Magnetic; (Start Relay) | 1 |
234-5012 Sensor Gp-Temperature
| 14***36 | Pin-Connector; (14-Ga To 18-Ga) | 2 |
| 23***11 | Plug As-Connector; (2-Pin) | 1 |
| 23***12 | Sensor Group-Temperature; -Coolant, Water | 1 |
274-7395 Sensor Gp-Temperature
| 27***95 | Sensor Group-Temperature; -Air Inlet Manifold | 1 |
| 29***36 | Switch As-Rocker; (24-Volt) | 1 |
197-8392 Sensor Gp-Temperature
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 19***92 | Sensor Group-Temperature; -Coolant, Water | 1 |
249-7310 Starting Aid Gp-Ether
| 24***10 | Starting Aid Group-Ether | 1 |
| 27***40 | Switch As-Rocker; (Engine Compression Brake) | 1 |
207-1556 Starting Motor Gp-Electric
| 20***56 | Starting Motor Group-Electric; (24-Volt) | 1 |
| 24***87 | Switch As-Rocker; (Blade Cushion) | 1 |
338-3454 Starting Motor Gp-Electric
| 24***19 | Mounting Bracket; (Lh) (Fabricated) | 1 |
| 25***44 | Film-Warning; (Blade, Do Not Climb, Read Omm) | 1 |
| 25***07 | Target Group-Laser | 1 |
248-0716 Starting Motor Gp-Electric
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***86 | Wiper Switch Assembly; (24-Volt)(Front/Intermittent) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
304-9377 Starting Motor Gp-Electric
| 11***93 | Lockwasher | 1 |
| 25***28 | Mounting Group-Receiver; -Target | 1 |
| 26***71 | Plate-Shock | 1 |
237-1962 Starting Motor Gp-Electric
| 23***30 | Switch As-Rocker; (Heated Mirrors) | 1 |
| 23***62 | Starting Motor Group-Electric | 1 |
| 29***60 | Relay As; (24-Vdc, 20-Ampere) | 1 |
299-7340 Starting Motor Gp-Electric -Cold Weather
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 6 |
| 29***40 | Starting Motor Group-Electric; -Cold Weather | 1 |
304-9374 Starting Motor Gp-Electric
| 01***16 | Setscrew; (8-32x0.5-In) | 1 |
| 27***41 | Switch Group-Wiper; -Intermittent-Front, Rear | 1 |
| 30***74 | Starting Motor Group-Electric | 1 |
238-8825 Support Gp-Light -Cab Roof
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 23***25 | Support Group-Light; -Cab Roof | 1 |
| 35***89 | Filter; (Ether Start) | 1 |
7n-0718 Switch Gp-Disconnect -Battery
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 36 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 9 |
164-7577 Switch Gp-Bypass
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***77 | Switch Group-Bypass; -Xmsn Lubrication Supply Filter-Xmsn Lubrication Charge Filter-Hoist Screen-Tc, Front Brake Cooling-Transmission Oil Filter-Rear Axle Oil Filter | 1 |
| 21***00 | Back-Up Alarm Assem. | 1 |
238-8763 Switch Gp-Light -Work Light
| 09***24 | Plug-Button | 1 |
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 1 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 23 |
171-3759 Switch Gp-Limit -Brake Pedal, Xmsn Mdl Cont
| 09***24 | Plug-Button | 1 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 52 |
| 09***34 | Terminal-Blade; (18-Ga To 22-Ga) | 2 |
175-2309 Switch Gp-Magnetic
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 12***74 | Cover-Connector; (Wire Router) | 2 |
| 14***45 | Plug As-Connector; (70-Pin) | 1 |
118-3534 Switch Gp-Magnetic
| 11***34 | Switch Group-Magnetic; -Start Relay | 1 |
| 25***60 | Camera Group; (115-Deg, Color)(Rear View) | 1 |
| 25***62 | Kit-Bracket; (Camera) | 1 |
175-2308 Switch Gp-Magnetic
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 2 |
| 10***97 | Mount-Wire Tie | 1 |
241-8368 Switch Gp-Magnetic
| 13***00 | Clip; (Tab) | 1 |
| 13***89 | Clip; (Ladder) | 2 |
| 15***75 | Ladder Clip | 2 |
179-0006 Switch Gp-Magnetic
| 13***00 | Clip; (Tab) | 1 |
| 13***89 | Clip; (Ladder) | 2 |
| 15***75 | Ladder Clip | 2 |
258-0883 Switch Gp-Pressure -Fuel
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 16 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
275-1253 Switch Gp-Pressure
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 16 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
329-3730 Switch Gp-Roading
| 03***48 | Clip; (11.11mm .437in Id) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 8 |
| 15***56 | Kit-Connecting Plug; (12-Pin) | 1 |
233-3124 Switch Gp-Roading
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 17 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
278-0685 Switch Gp-Rocker -Engine Brake
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
238-8824 Switch Gp-Rocker -Autoshift
| 03***48 | Clip; (11.11mm .437in Id) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 8 |
| 15***56 | Kit-Connecting Plug; (12-Pin) | 1 |
312-2630 Switch Gp-Rocker -Secondary Steering
| 03***48 | Clip; (11.11mm .437in Id) | 7 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
| 13***00 | Clip; (Tab) | 3 |
343-1824 Switch Gp-Rocker -Heated Mirrors
| 03***48 | Clip; (11.11mm .437in Id) | 6 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
321-6987 Switch Gp-Rocker
| 03***48 | Clip; (11.11mm .437in Id) | 6 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
| 13***00 | Clip; (Tab) | 3 |
275-7741 Switch Gp-Wiper -Intermittent
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 14 |
| 15***55 | Kit; (Connecting Plug) (12-Pin) (Includes Plug As Wedge & Interface Seal) | 2 |
3e-0155 Switch Gp-Wiper -Intermittent
| 03***48 | Clip; (11.11mm .437in Id) | 6 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
| 11***43 | Sleeve-Plastic; (32-mm Dia)(240-cm) | 0 |
275-7764 Switch Gp-Wiper -Intermittent
| 15***55 | Kit; (Connecting Plug) (12-Pin) (Includes Plug As Wedge & Interface Seal) | 1 |
| 15***74 | Kit-Connecting Plug; (6-Pin)(Cat Electronic Display Harness) | 1 |
| 27***64 | Switch Group-Wiper; -Intermittent | 1 |
256-2907 Target Gp-Laser
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 18***40 | Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga) | 1 |
295-9880 Target Gp-Laser
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 6 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
239-1134 Valve Gp-Ether Starting
| 09***17 | Washer, Spring; (Spring) | 2 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***74 | Cover-Connector; (Wire Router) | 1 |
257-7224 Warning Gp-Backup
| 03***32 | Rod End | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
319-8714 Wiring Gp-Cab
| 03***32 | Rod End | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
291-2910 Wiring Gp-Cab
| 03***32 | Rod End | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
351-7026 Wiring Gp-Cab
| 15***49 | Cable-Electrical; (03050 mm ) | 0 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 1 |
| 30***57 | Cable As; (Starter Motor) | 1 |
259-6726 Wiring Gp-Camera -Rear View
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 4 |
| 11***09 | Grommet | 2 |
306-8172 Wiring Gp-Electronic Control
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 4 |
| 11***62 | Tube-Heat Shrink; (10.85-mm Dia)(299-cm) | 0 |
219-7462 Wiring Gp-Electronic Control
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 4 |
| 11***09 | Grommet | 2 |
238-8828 Wiring Gp-Electronic Control -Hydraulic Implement
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 4 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 4 |
| 11***09 | Grommet | 2 |
357-0524 Wiring Gp-Electronic Control
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 15***49 | Cable-Electrical; (03050 mm ) | 0 |
| 17***06 | Switch Group-Magnetic; -Hydraulic Tank Fill Pump/Motor Relay | 1 |
250-0890 Wiring Gp-Front
| 11***02 | Dowel-Hollow | 4 |
| 23***60 | Clip | 1 |
| 24***82 | Clip | 9 |
250-0899 Wiring Gp-Front
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 1 |
| 16***49 | Bolt; (M12x1.75x60-mm) | 4 |
| 19***69 | Washer; (22x40x10-mm Thk) | 54 |
250-0895 Wiring Gp-Grade Control
| 14***39 | Lock | 3 |
| 14***09 | Adapter As | 1 |
| 14***06 | Plug As | 6 |
233-3288 Wiring Gp-Grade Control -Cab
| 23***88 | Wiring Group-Grade Control; -Cab | 1 |
| 5P***01 | Seal-O-Ring; (29.74mm Id)(Pump To Fitting As) | 1 |
| 5P***15 | Seal-O-Ring; (37.46mm Id)(Connector To Pump Gp) | 1 |
292-1874 Wiring Gp-Lighting -Work Lights
| 14***10 | Bearing As | 1 |
| 16***13 | Ring-Seal | 2 |
| 16***67 | Plate-End | 2 |
291-2909 Wiring Gp-Lighting -Floodlights, Warning Beacon
| 14***10 | Bearing As | 1 |
| 16***13 | Ring-Seal | 2 |
| 16***88 | Ring-Seal | 2 |
250-1096 Wiring Gp-Lubrication
| 14***10 | Bearing As | 1 |
| 16***13 | Ring-Seal | 2 |
| 16***67 | Plate-End | 2 |
253-1967 Wiring Gp-Monitor
| 14***18 | Connector As | 1 |
| 14***25 | Connector As. | 1 |
| 14***68 | Elbow Group | 1 |
253-1964 Wiring Gp-Monitor
| 14***10 | Bearing As | 1 |
| 16***13 | Ring-Seal | 1 |
| 16***67 | Plate-End | 1 |
260-1871 Wiring Gp-Power Receptacle -Circuit Breaker Panel
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
260-1870 Wiring Gp-Rear
| 10***69 | Bolt-Self-Locking; (M16x2x60-mm) | 4 |
| 13***05 | Ring-Retaining | 1 |
| 16***10 | Bolt-Hex; (M20 X 2.5 X 60) | 16 |
305-0037 Wiring Gp-Rear
| 10***69 | Bolt-Self-Locking; (M16x2x60-mm) | 4 |
| 13***05 | Ring-Retaining | 1 |
| 16***10 | Bolt-Hex; (M20 X 2.5 X 60) | 16 |
250-0902 Wiring Gp-Rear Lighting -Stop, Tail, Turn, Backup
| 13***29 | Seal-O-Ring | 1 |
| 1R***09 | Filter Element-Oil; (Ultra High Efficiency)(Power Train) | 1 |
| 24***52 | Housing As; (Oil Filter) | 1 |
257-8028 Wiring Gp-Rear Lighting
| 25***28 | Wiring Group-Rear Lighting | 1 |
| 25***50 | Bracket As | 1 |
| 28***11 | Filter Group-Oil; -Transmission | 1 |
260-1872 Wiring Gp-Secondary Steering
| 12***09 | Elbow | 1 |
| 13***29 | Seal-O-Ring | 1 |
| 1R***09 | Filter Element-Oil; (Ultra High Efficiency)(Power Train) | 1 |
250-0900 Wiring Gp-Sensor -Variable Blade Float
| 12***09 | Elbow | 1 |
| 13***29 | Seal-O-Ring | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 4 |
230-0961 Wiring Gp-Unit Injector
| 00***62 | Cone-Tapered | 1 |
| 13***97 | Cone-Bearing | 1 |
| 13***98 | Cup-Roller Bearing | 1 |
267-3088 Wiring Gp-Unit Injector
| 1P***78 | Flange; (To 5v***09 Tube Assembly) | 2 |
| 1P***79 | Flange (Half) | 2 |
| 26***88 | Wiring Group-Unit Injector | 1 |
257-4183 Wiring Gp-Unit Injector
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
| 14***67 | Elbow Group; (Each Includes) | 1 |
| 25***83 | Wiring Group-Unit Injector | 1 |
Engine Arrangement
276-1279 Engine Ar-Complete -With Engine Brake
| 14***95 | Pump Group-Fuel Transfer | 1 |
| 21***72 | Housing Group-Front | 1 |
| 22***88 | Gear Group-Front | 1 |
231-0876 Engine Ar-Complete
| 23***76 | Engine Ar-Complete | 2 |
| 27***85 | Switch Group-Rocker; -Engine Brake | 1 |
349-4462 Engine Ar-Complete
| 21***72 | Housing Group-Front | 1 |
| 22***88 | Gear Group-Front | 1 |
| 22***75 | Plug Group-Cylinder Block; (Cylinder Block) | 1 |
227-5359 Engine Ar-Complete
| 11***65 | Plug Group-Cylinder Block; -Oil Gallery, End | 1 |
| 11***66 | Damper Group | 1 |
| 11***71 | Fastener Group-Damper & Pulley | 1 |
267-0009 Engine Ar-Core
| 21***72 | Housing Group-Front | 1 |
| 22***88 | Gear Group-Front | 1 |
| 22***75 | Plug Group-Cylinder Block; (Cylinder Block) | 1 |
301-2265 Engine Ar-Core
| 13***89 | Clip; (Ladder) | 1 |
| 18***38 | Dowel | 2 |
| 24***61 | Base | 1 |
231-0877 Engine Ar-Core
| 21***72 | Housing Group-Front | 1 |
| 22***88 | Gear Group-Front | 1 |
| 22***75 | Plug Group-Cylinder Block; (Cylinder Block) | 1 |
286-5804 Engine Ar-Core
| 26***44 | Actuator As | 3 |
| 28***04 | Engine Ar-Core | 1 |
| 3H***54 | Washer-Hard; (13.5x22.5x3.0-mm Thk)(Hard) | 6 |
359-0362 Engine Ar-Core
| 13***89 | Clip; (Ladder) | 1 |
| 27***89 | Seal | 1 |
| 32***05 | Base Group-Valve Cover | 1 |
359-0363 Engine Ar-Core
| 32***39 | Seal-Pip | 1 |
| 33***07 | Adapter | 1 |
| 35***63 | Engine Ar-Core | 1 |
Frame And Body
251-1202 Axle Ar-Front -Non All Wheel Drive
| 25***02 | Axle Ar-Front; -Non All Wheel Drive | 1 |
| 31***70 | Reflector; (Amber)(Amber) | 8 |
| 31***71 | Reflector; (Red) | 2 |
264-1144 Axle As-Front -Non All Wheel Drive
| 26***44 | Axle As-Front; -Non All Wheel Drive | 1 |
| 31***70 | Reflector; (Amber)(Amber) | 2 |
250-2282 Axle Gp-Front
| 19***80 | Washer-Hard; (17.5x32x8-mm Thk) | 6 |
| 19***82 | Washer-Hard; (26x47x12-mm Thk) | 4 |
| 22***12 | Film; (Warning) (Jump Start) (On Outside Of Battery Compartment Door) | 1 |
248-1488 Bracket Gp-Mounting -Sonic Sensor
| 24***88 | Bracket Group-Mounting; -Sonic Sensor | 1 |
| 26***59 | Plate As | 1 |
| 27***87 | Cover | 1 |
250-0159 Cover Gp-Control Valve
| 20***43 | Bolt; (M12x1.75x42.5-mm) | 30 |
| 25***59 | Cover Group-Control Valve | 1 |
| 25***22 | Plate | 6 |
344-0053 Cover Gp-Protection -Hydraulic Oil Cooler, Snow
| 14***43 | Support-Step; (Rubber)(Step Access) | 2 |
| 1B***09 | Bolt-Carriage | 4 |
| 1D***89 | Bolt (1.75" Long) | 4 |
250-0160 Enclosure Gp-Engine
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 6 |
| 19***80 | Washer-Hard; (17.5x32x8-mm Thk) | 4 |
| 25***60 | Enclosure Group-Engine | 1 |
318-2140 Fastener Gp-Enclosure
| 20***29 | Elbow As | 1 |
| 26***46 | Injector As-Grease; (2-Injector) | 1 |
| 2D***83 | Fitting | 2 |
248-1484 Fastener Gp-Sensor
| 17***32 | Bolt-Hex Head; (M4x0.7x16mm) | 8 |
| 24***84 | Fastener Group-Sensor; -Sonic | 1 |
| 26***99 | Support As | 1 |
321-1458 Fastener Gp-Sensor -Sonic
| 23***51 | Screw-Button Head; (M10x1.5x25-mm) | 28 |
| 27***50 | Plate As | 2 |
| 27***66 | Bracket As | 12 |
328-5399 Fender & Support Gp -Rear
| 09***30 | Ring-Retaining; (External) | 1 |
| 12***55 | Plug | 3 |
| 12***81 | Bolt-Socket Head; (M10x1.5x55-mm) | 3 |
250-0166 Fender & Support Gp
| 23***51 | Screw-Button Head; (M10x1.5x25-mm) | 28 |
| 25***66 | Fender & Support Group | 1 |
| 27***66 | Bracket As | 12 |
286-1301 Frame Gp-Front
| 09***30 | Ring-Retaining; (External) | 1 |
| 12***55 | Plug | 3 |
| 12***81 | Bolt-Socket Head; (M10x1.5x55-mm) | 3 |
284-6068 Frame Gp-Rear
| 09***30 | Ring-Retaining; (External) | 1 |
| 12***55 | Plug | 3 |
| 12***81 | Bolt-Socket Head; (M10x1.5x55-mm) | 3 |
285-2259 Guard Gp-Bottom
| 11***98 | Boot | 1 |
| 11***99 | Kit-Seal; (Brake Valve)(Service Brake Valve) | 1 |
| 26***43 | Pedal Group-Brake, Xmsn & Gov | 1 |
257-4941 Guard Gp-Debris
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 5 |
| 14***28 | Tee As-Orfs | 1 |
| 24***80 | Control Group-Service Brake | 1 |
316-3309 Handhold Gp -Cab
| 13***34 | Spacer; (11x20x25-mm Thk) | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 1 |
| 14***40 | Adapter; (Straight) (-8 Orb X -8 Orfs) | 1 |
250-2283 Hitch Gp-Articulating
| 17***93 | Kit-Seal; (Hydraulic Accumulator) | 1 |
| 19***50 | Core | 1 |
| 22***67 | Valve Group-Accumulator Charging | 1 |
252-0978 Hitch Gp-Towing
| 17***93 | Kit-Seal; (Hydraulic Accumulator) | 1 |
| 19***50 | Core | 1 |
| 22***67 | Valve Group-Accumulator Charging | 1 |
250-0172 Insulation Gp-Sound Suppr -Engine Enclosure
| 25***72 | Insulation Group-Sound Suppr; -Engine Enclosure | 1 |
| 26***72 | Valve Group-Bank 5; -Front | 1 |
| 26***78 | Valve Group-Bank 3; -Rear | 1 |
283-7773 Lines Gp-Automatic Lubrication
| 23***47 | Control Group-Electrohydraulic; -With Auxiliary Lever | 1 |
| 23***28 | Wiring Group-Electronic Control; -Hydraulic Implement | 1 |
| 25***99 | Wiring Group-Front | 1 |
283-7765 Lines Gp-Lubrication
| 28***65 | Lines Group-Lubrication | 1 |
| 32***30 | Switch Group-Roading | 1 |
| 33***94 | Configuration-Premium | 1 |
264-1163 Link Gp-Steering -Non All Wheel Drive
| 26***63 | Link Group-Steering; -Non All Wheel Drive | 1 |
| 28***54 | Lines Group-Accumulator | 1 |
| 32***87 | Switch Group-Rocker; -Blade Cushion | 1 |
269-6941 Lubrication Ar-Automatic
| 11***20 | Elbow | 1 |
| 13***45 | Pad; (Connector) | 1 |
| 13***02 | Tee-Swivel-Orfs | 1 |
308-3535 Lubrication Ar-Automatic -Wiper
| 17***93 | Bushing | 2 |
| 25***06 | Washer; (55.5x98x1-mm Thk) | 2 |
| 27***58 | Pin As | 2 |
288-6307 Mounting Gp-Axle -Front
| 24***37 | Spacer; (39x75x20-mm Thk) | 2 |
| 28***07 | Mounting Group-Axle; -Front | 1 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 2 |
284-5038 Mounting Gp-Axle -Rear
| 11***29 | Bolt; (M24x3x100-mm) | 4 |
| 22***98 | Bolt; (Mj20) | 8 |
| 26***06 | Washer-Hard; (26x44x4-mm Thk) | 4 |
249-6554 Mounting Gp-Valve -Implement, Steering
| 11***29 | Bolt; (M24x3x100-mm) | 4 |
| 24***54 | Mounting Group-Valve; -Implement, Steering | 1 |
| 26***05 | Cylinder Group-Centershift | 1 |
272-1346 Pump Gp-Lubrication
| 16***80 | Bolt; (M20x2.5x75-mm) | 4 |
| 1H***78 | Pin | 1 |
| 25***76 | Bracket | 1 |
296-0011 Reflector Gp -Machine
| 1D***06 | Nut-Slotted | 2 |
| 1F***17 | Boss; (.625 mm) | 1 |
| 24***05 | Race-Bearing | 2 |
296-0012 Reflector Gp -Ripper
| 28***54 | Cylinder Group-Wheel Lean; -Non All Wheel Drive | 1 |
| 29***12 | Reflector Group; -Ripper | 1 |
| 2G***11 | Pin | 1 |
250-0162 Service Center Ar
| 14***93 | Piston | 1 |
| 16***01 | Seal As-Buffer | 1 |
| 16***12 | Seal-U-Cup | 1 |
275-2190 Shield Gp-Engine Compartment
| 17***83 | Bolt-Hex Head; (M30x3.5x90mm) | 1 |
| 17***00 | Seal-O-Ring | 1 |
| 22***82 | Seal-Wiper | 0 |
314-4860 Step Gp -Lh
| 16***01 | Seal As-Buffer | 1 |
| 16***12 | Seal-U-Cup | 1 |
| 17***81 | Head | 1 |
289-3343 Step Gp -Rh
| 16***01 | Seal As-Buffer | 1 |
| 16***12 | Seal-U-Cup | 1 |
| 17***81 | Head | 1 |
312-6371 Step Gp -Rh
| 11***76 | Cylinder As | 1 |
| 11***81 | Rod As | 1 |
| 12***95 | Head | 1 |
291-9790 Step Gp
| 16***01 | Seal As-Buffer | 1 |
| 16***12 | Seal-U-Cup | 1 |
| 17***81 | Head | 1 |
273-3001 Support Gp-Fuel Tank
| 10***44 | Grommet | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 14***92 | Boss As | 1 |
312-3659 Valve Gp-Lube Distribution -3-Injector
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 8 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 1A***15 | Nut; (23/4x17/8-Thd) | 1 |
333-0677 Valve Gp-Lube Distribution -4-Injector
| 12***08 | Hose-Hydraulic; (21.3-Inches) | 0 |
| 14***08 | Plug As. | 2 |
| 15***83 | Connector As | 1 |
312-3658 Valve Gp-Lube Distribution -11-Injector
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 11 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 1A***15 | Nut; (23/4x17/8-Thd) | 1 |
312-3686 Valve Gp-Lube Distribution -2-Injector
| 25***75 | Lines Group-Hydraulic Fan; -Variable | 1 |
| 29***18 | Fan | 1 |
| 31***86 | Valve Group-Lube Distribution; -2-Injector | 1 |
312-3657 Valve Gp-Lube Distribution -11-Injector
| 12***47 | Rod As | 1 |
| 16***00 | Seal Assem. | 1 |
| 16***07 | Seal-U-Cup | 1 |
329-8820 Walkway Gp
| 14***68 | Film-Identification; (Biodegradable Hydraulic Oil) | 1 |
| 32***20 | Walkway Group | 1 |
260-3769 Walkway Gp
| 18***64 | Valve As-Fluid Sampling; (Transmission) | 1 |
| 1G***78 | Filter As-Oil; (Advanced Efficiency)(Hydraulic) | 1 |
| 26***69 | Walkway Group | 1 |
262-7898 Walkway Gp -Tandem
| 25***00 | Wiring Group-Sensor; -Variable Blade Float | 1 |
| 26***98 | Walkway Group; -Tandem | 1 |
| 27***98 | Panel Group-Control; -Variable Blade Float | 1 |
Fuel System
277-2166 Adapter Gp-Fast Fill Fuel
| 03***42 | Elbow Hose Assembly To | 1 |
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 2 |
| 06***51 | Clamp | 1 |
254-4998 Filter Gp-Fuel
| 12***64 | Clamp | 4 |
| 19***98 | Bolt-Wing | 1 |
| 1P***78 | Clamp; (Hose) | 2 |
356-8382 Filter Gp-Fuel
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 3 |
| 06***51 | Clamp | 1 |
| 10***12 | Spacer; (11.13x19.05x53-mm Thk) | 1 |
174-9570 Filter Gp-Water Sep & Fuel -Primary
| 17***70 | Filter Group-Water Sep & Fuel; -Primary | 1 |
| 22***91 | Clamp-Injector | 1 |
| 24***13 | Injector Group-Fuel | 1 |
123-0783 Valve Gp-Fluid Sampling -Fuel
| 12***83 | Fitting Group-Fuel Lines; -Fuel | 1 |
| 27***69 | Control Group-Unprogrammed; -Implement 2 | 1 |
| 27***70 | Control Group-Unprogrammed; -Implement 1 | 1 |
249-0713 Injector Gp-Fuel
| 03***76 | Elbow-Flared | 2 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 13***29 | Clip | 1 |
289-4112 Lines Gp-Fuel
| 10***69 | Seal-O-Ring; (Fuel Transfer Pump) | 1 |
| 13***83 | Bolt-12 Point Head; (M10x1.5x30-mm) | 4 |
| 28***12 | Lines Group-Fuel | 1 |
277-3628 Lines Gp-Fuel -Fast Fill System
| 09***70 | Washer-Sealing | 2 |
| 10***69 | Seal-O-Ring; (Fuel Transfer Pump) | 1 |
| 11***29 | Bolt-12 Point Head; (M10x1.5x25-mm) | 4 |
254-4999 Lines Gp-Fuel
| 03***76 | Elbow-Flared | 2 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***44 | Sleeve-Plastic; (20-cm) | 0 |
253-1461 Pump Gp-Fuel Injection
| 10***69 | Seal-O-Ring; (Fuel Transfer Pump) | 1 |
| 13***83 | Bolt-12 Point Head; (M10x1.5x30-mm) | 4 |
| 25***61 | Pump Group-Fuel Injection | 1 |
249-7324 Pump Gp-Fuel Priming
| 11***50 | Adapter | 1 |
| 16***97 | Connector As | 1 |
| 19***07 | Strainer-Fuel | 1 |
190-8977 Pump Gp-Fuel Prm & Water Sep
| 19***77 | Pump Group-Fuel Prm & Water Sep; -Primary Fuel Filter | 1 |
| 23***81 | Seal-O-Ring | 1 |
| 28***25 | Valve Group-Check; -Fuel | 1 |
145-1695 Pump Gp-Fuel Transfer
| 14***95 | Pump Group-Fuel Transfer | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
| 6V***52 | Cap-Dust; (Fuel Supply Tee Connection) | 1 |
227-5723 Pump Gp-Fuel Transfer
| 1P***82 | Flange-Half | 2 |
| 22***23 | Pump Group-Fuel Transfer | 1 |
| 25***65 | Valve As-Shutoff; (Fast Fill Fuel) | 1 |
295-9259 Pump Gp-Fuel Transfer
| 11***73 | Screw-Button Head; (10-32x0.75-In) | 4 |
| 13***44 | Strap Assem. | 1 |
| 15***10 | Battery; (12-Volt, 1400-Cca) | 2 |
301-2262 Pump Gp-Fuel Transfer
| 15***49 | Cable-Electrical; (03050 mm ) | 0 |
| 1S***51 | Terminal-Cable; (00-Ga, 1/2-In Screw) | 1 |
| 28***23 | Cable As | 1 |
284-2824 Pump Gp-Fuel Transfer
| 23***54 | Control Group-Unprogrammed; (Product Link 300)(Product Link 321sr) | 1 |
| 28***24 | Pump Group-Fuel Transfer | 1 |
250-0161 Tank Gp-Fuel
| 25***61 | Tank Group-Fuel | 1 |
| 5C***61 | Nut (M8x1.25 Thd); (M8x1.25 Thd) | 1 |
| 6V***64 | Washer-Hard; (8.8x25.5x5-mm Thk) | 1 |
233-6742 Valve Gp-Check -Fuel
| 22***73 | Control Group-Engine Electronic | 1 |
| 23***93 | Bolt-Flange Head; (M6x1x35-mm) | 1 |
| 23***91 | Bracket As; (Harness) | 2 |
281-2725 Valve Gp-Check -Fuel
| 22***73 | Control Group-Engine Electronic | 1 |
| 23***93 | Bolt-Flange Head; (M6x1x35-mm) | 1 |
| 23***91 | Bracket As; (Harness) | 2 |
271-8741 Valve Gp-Fuel Shutoff -Fast Fill
| 26***78 | Control Group-Unprogrammed; (Engine) | 1 |
| 27***41 | Valve Group-Fuel Shutoff; -Fast Fill | 1 |
Hydraulic System
219-8064 Accumulator Gp-Blade Cushion -Uncharged
| 14***38 | Elbow | 1 |
| 14***54 | Elbow; (45) (-8/-8 Orb/Orfs) | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
219-8035 Accumulator Gp-Blade Cushion -Charged
| 09***83 | Nut-Self-Locking; (M10x1.50 Thd) | 34 |
| 09***59 | Bolt; (M14x2x60-mm) | 4 |
| 10***71 | Hose As | 1 |
356-1240 Accumulator Gp-Blade Cushion -Uncharged
| 14***38 | Elbow | 1 |
| 14***54 | Elbow; (45) (-8/-8 Orb/Orfs) | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
356-1241 Accumulator Gp-Blade Cushion -Charged
| 14***74 | Bolt; (M10x1.5x75-mm) | 2 |
| 14***90 | Clip; (Slot) | 4 |
| 14***91 | Clip 2 Piece | 4 |
261-0098 Control Ar-Hydraulic -Dozer Angle, Front Lift, Ripper, Wing Mast, Wing Tilt
| 24***86 | Valve Group-Solenoid; (24-Volt)(Ride Control, Lift Cyl Rod End) | 1 |
| 24***81 | Coil As | 1 |
| 25***19 | Manifold | 1 |
251-1089 Control Ar-Hydraulic
| 14***74 | Bolt; (M10x1.5x75-mm) | 2 |
| 14***18 | Connector As | 4 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 3 |
348-3537 Control Ar-Hydraulic -Auto Diff Lock Position
| 12***40 | Seal-O-Ring | 2 |
| 13***30 | Valve Group-Relief | 1 |
| 15***45 | Elbow | 1 |
261-0096 Control Ar-Hydraulic -Front Lift, Ripper
| 15***46 | Valve Group-Solenoid; -Quick Coupler | 1 |
| 16***07 | Seal-U-Cup | 1 |
| 26***96 | Control Ar-Hydraulic; -Front Lift, Ripper | 1 |
251-2035 Control Ar-Hydraulic -Ripper
| 10***65 | Tee As-Swivel | 1 |
| 14***74 | Bolt; (M10x1.5x75-mm) | 2 |
| 14***13 | Adapter Group | 1 |
261-0097 Control Ar-Hydraulic -Ripper, Wing Mast, Wing Tilt
| 15***56 | Valve Group-Check; -Pilot, Differential Lock Oil | 1 |
| 18***27 | Valve Group-Solenoid | 1 |
| 20***82 | Kit-Seal; (Diverter Valve)(Hydraulic Fan Fluid Flow) | 1 |
340-4395 Control Ar-Hydraulic -Front Lift, Wing Mast, Wing Tilt, Ripper
| 10***48 | Kit-Seal; (Solenoid Valve)(Pilot Proportioning Valve) | 1 |
| 12***55 | Plug | 1 |
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
354-8463 Control Ar-Hydraulic
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 2 |
| 14***11 | Plug Group | 4 |
| 17***93 | Plug As | 5 |
249-7365 Cooler Gp-Hydraulic Oil
| 09***31 | Orifice | 1 |
| 13***45 | Seal Kit; (Includes Parts Marked J) | 1 |
| 14***07 | Plug; (Hex Head) (-6 Orb) (Current) (16***35 Friction Disc Interchangeable With 11***47) (Use All Of One Part Number) | 3 |
283-7764 Cylinder & Mtg Gp-Articulation
| 28***64 | Cylinder & Mtg Group-Articulation | 1 |
| 6Y***32 | Bearing-Thrust | 1 |
| 6Y***33 | Ring-Thrust | 2 |
261-2372 Cylinder & Mtg Gp-Blade Lift
| 1H***27 | Seal 10.1 cm(3.984 In.) I.D. | 1 |
| 25***32 | Pump Group-Piston; (Brake, Hydraulic Fan) | 1 |
| 26***72 | Cylinder & Mtg Group-Blade Lift | 1 |
260-3646 Cylinder & Mtg Gp-Blade Tip
| 24***86 | Pump Group-Piston; -Implement, Steering | 1 |
| 26***46 | Cylinder & Mtg Group-Blade Tip | 1 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 4 |
261-2373 Cylinder & Mtg Gp-Centershift
| 26***73 | Cylinder & Mtg Group-Centershift | 1 |
| 29***72 | Pump & Motor Group-Sec Steering | 1 |
| 8T***37 | Bolt (M10x1.50x20mm) | 4 |
257-6804 Cylinder & Mtg Gp-Sideshift
| 00***69 | Cup-Roller Bearing | 1 |
| 00***71 | Cone-Bearing | 1 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
264-1160 Cylinder & Mtg Gp-Steering -Non All Wheel Drive
| 26***60 | Cylinder & Mtg Group-Steering; -Non All Wheel Drive | 1 |
| 6E***17 | Plate-Limiter | 2 |
| 6E***18 | Plate-Spacer | 2 |
249-6545 Cylinder & Mtg Gp-Wheel Lean -Non All Wheel Drive
| 16***01 | Swashplate Stop | 2 |
| 1H***37 | Pin (Spring) | 2 |
| 24***45 | Cylinder & Mtg Group-Wheel Lean; -Non All Wheel Drive | 1 |
290-8074 Cylinder Gp-Articulation
| 17***07 | Seal | 2 |
| 17***08 | Rotor | 1 |
| 17***09 | Retainer | 1 |
9t-8944 Cylinder Gp-Blade Tip
| 1P***78 | Clamp; (Hose) | 3 |
| 25***84 | Strap As | 1 |
| 27***74 | Tank Group-Hydraulic | 1 |
262-1905 Cylinder Gp-Centershift
| 12***98 | Bolt-Socket Head; (M5x0.8x12-mm) | 6 |
| 13***56 | Seal-O-Ring | 1 |
| 14***28 | Elbow | 1 |
270-7538 Cylinder Gp-Lift
| 14***11 | Plug Group | 6 |
| 24***62 | Seal-Integral | 4 |
| 24***36 | Rod | 4 |
113-5264 Cylinder Gp-Ripper
| 11***64 | Cylinder Group-Ripper | 1 |
| 14***11 | Plug Group | 8 |
| 24***62 | Seal-Integral | 5 |
257-5083 Cylinder Gp-Sideshift
| 14***11 | Plug Group | 10 |
| 24***62 | Seal-Integral | 6 |
| 24***74 | Rod | 4 |
267-3863 Cylinder Gp-Steering -Non All Wheel Drive
| 14***11 | Plug Group | 12 |
| 24***62 | Seal-Integral | 7 |
| 24***34 | Rod | 4 |
289-3054 Cylinder Gp-Wheel Lean -Non All Wheel Drive
| 14***11 | Plug Group | 12 |
| 24***62 | Seal-Integral | 7 |
| 24***34 | Rod | 4 |
265-6725 Drive Gp-Circle
| 14***11 | Plug Group | 14 |
| 24***62 | Seal-Integral | 8 |
| 24***93 | Rod | 4 |
296-5219 Fan Ar-Hydraulic
| 29***19 | Fan Ar-Hydraulic | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 6V***97 | Seal (Later Machines And Field Installed) | 1 |
250-3507 Filter & Mtg Gp-Hydraulic
| 16***54 | Seal-O-Ring | 1 |
| 25***07 | Filter & Mtg Group-Hydraulic | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
191-9784 Filter Gp-Oil -Implement Pilot Oil
| 10***59 | Piston | 1 |
| 13***92 | Bolt; (M6x1x35-mm) | 4 |
| 14***57 | Plug | 6 |
271-3652 Float Ar-Blade
| 10***59 | Piston | 1 |
| 13***92 | Bolt; (M6x1x35-mm) | 4 |
| 14***57 | Plug | 6 |
252-8226 Hydraulic Ar -Biodegradable Hydraulic Oil
| 10***59 | Piston | 1 |
| 13***92 | Bolt; (M6x1x35-mm) | 4 |
| 14***57 | Plug | 6 |
287-7454 Lines Gp-Accumulator
| 10***60 | Piston | 2 |
| 13***92 | Bolt; (M6x1x35-mm) | 4 |
| 14***57 | Plug | 6 |
249-6531 Lines Gp-Centershift Lock
| 10***60 | Piston | 2 |
| 13***92 | Bolt; (M6x1x35-mm) | 4 |
| 14***57 | Plug | 6 |
277-6005 Lines Gp-Hydraulic -Blade Cushion
| 10***59 | Piston | 1 |
| 13***92 | Bolt; (M6x1x35-mm) | 4 |
| 14***57 | Plug | 6 |
259-9075 Lines Gp-Hydraulic Fan -Variable
| 25***75 | Lines Group-Hydraulic Fan; -Variable | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
| 5P***99 | Ring-To Clutch Piston Pins | 1 |
283-7734 Lines Gp-Hydraulic Fan
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 03***36 | Seal-O-Ring | 1 |
| 28***34 | Lines Group-Hydraulic Fan | 1 |
266-5813 Lines Gp-Ripper
| 13***45 | Seal Kit; (Includes Parts Marked J) | 1 |
| 16***49 | Seal-O-Ring; (12.42mm Id) | 1 |
| 16***61 | Ring-Backup | 2 |
207-3736 Lines Gp-Ripper
| 13***45 | Seal Kit; (Includes Parts Marked J) | 1 |
| 16***49 | Seal-O-Ring; (12.42mm Id) | 1 |
| 16***61 | Ring-Backup | 2 |
283-7770 Lines Gp-Ripper
| 09***50 | Seal-O-Ring (Id=10.82mm) | 1 |
| 16***49 | Seal-O-Ring; (12.42mm Id) | 1 |
| 16***61 | Ring-Backup | 1 |
283-7735 Lines Gp-Secondary Steering
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 15***84 | Locknut; (Special) (5/8-18 Thd) | 1 |
| 16***43 | Washer-Identification; (16.8x38.1x.5mm Thk) | 1 |
283-7767 Lines Gp-Secondary Steering
| 03***21 | Ring-Back-Up | 1 |
| 16***54 | Seal-O-Ring | 1 |
| 18***91 | Coil As | 1 |
249-6550 Lines Gp-Steering
| 19***07 | Seal-O-Ring | 1 |
| 19***08 | Seal-O-Ring | 2 |
| 19***10 | Seal-O-Ring | 3 |
344-7950 Lines Gp-Steering
| 12***20 | Setscrew-Socket; (M20x2.5x80-mm) | 4 |
| 24***00 | Bracket As | 1 |
| 25***89 | Strip-Wear | 2 |
249-6537 Lock Gp-Centershift
| 10***75 | Bolt; (M20x2.5x60-mm) | 22 |
| 11***26 | Bolt; (M20x2.5x110-mm) | 8 |
| 11***28 | Bolt; (M24x3x130-mm) | 18 |
251-8256 Manifold Gp-Control -Brake, Hydraulic Fan
| 11***28 | Bolt; (M24x3x130-mm) | 10 |
| 25***56 | Manifold Group-Control; -Brake, Hydraulic Fan | 1 |
| 26***37 | Plate As | 1 |
253-1320 Manifold Gp-Control -Blade Cushion
| 11***92 | Rod | 1 |
| 13***38 | Washer-Plastic; (13x31.7x0.8-mm Thk) | 2 |
| 13***44 | Latch Assem.; (Lh) | 1 |
322-3798 Manifold Gp-Control -Accumulator
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***25 | Clip | 1 |
| 12***40 | Resistor | 1 |
263-1790 Manifold Gp-Control -Implement, Steering
| 11***19 | Screw-Flat Head; (No 6x1-In) | 2 |
| 14***69 | Screw-Self-Tapping; (No 10x19.05-mm) | 2 |
| 24***10 | Gasket | 2 |
353-2605 Manifold Gp-Control -Implement, Steering
| 11***66 | Plate-Instruction; (Read Service Manual) | 1 |
| 23***91 | Control Group-Air & Temperature | 1 |
| 24***01 | Duct & Filter Group-Cab Air | 1 |
353-2604 Manifold Gp-Control
| 10***74 | Seal-Connector | 3 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
| 11***25 | Clip | 1 |
254-3415 Manifold Gp-Control -Steering
| 25***15 | Manifold Group-Control; -Steering | 1 |
292-2033 Manifold Gp-Valve -Inlet
| 1S***94 | Clip-R.H. Side Engine Support | 2 |
| 27***27 | Air Conditioner Group | 1 |
| 29***33 | Manifold Group-Valve; -Inlet | 1 |
292-2034 Manifold Gp-Valve -Inlet
| 10***97 | Valve As; (Low Side) | 1 |
| 10***99 | Valve As; (Air Conditioner Refrigerant) | 1 |
| 16***16 | Fan As; (5-Blade) | 2 |
9t-5977 Motor Gp-Gerotor
| 12***66 | Spring | 1 |
| 23***78 | Bracket As; (Rh) | 1 |
| 25***68 | Pin-Spring | 1 |
292-5072 Pump & Motor Gp-Sec Steering
| 12***66 | Spring | 1 |
| 23***77 | Bracket As; (Lh) | 1 |
| 25***68 | Pin-Spring | 1 |
249-6534 Pump & Mtg Gp-Hydraulic Fan -Brake
| 11***58 | Washer; (6.5x17x1-mm Thk) | 4 |
| 24***34 | Pump & Mtg Group-Hydraulic Fan; -Brake | 1 |
| 26***32 | Plate As | 1 |
249-6532 Pump & Mtg Gp-Piston -Implement, Steering
| 09***16 | Setscrew-Socket; (M12x1.75x12-mm) | 2 |
| 23***33 | Roof Group-Cab | 1 |
| 23***35 | Converter Group-Electrical | 1 |
283-7774 Pump & Mtg Gp-Secondary Steer
| 13***93 | Bushing | 1 |
| 16***66 | Nut-Speed | 2 |
| 23***39 | Core As-Heater; (Cab) | 1 |
246-4486 Pump Gp-Piston -Implement, Steering
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 2 |
| 24***86 | Pump Group-Piston; -Implement, Steering | 1 |
6e-4216 Rotating Gp-Pump -Implement, Steering
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***76 | Seal; (5.5-cm Each) | 0 |
| 14***45 | Film-Identification; (Horn) | 1 |
184-1527 Swashplate Gp
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***58 | Washer; (6.5x17x1-mm Thk) | 20 |
260-6502 Swivel Gp -Circle Drive
| 24***20 | Panel As; (Air Conditioner, Heater Cont) | 1 |
| 25***96 | Switch As-Rocker; (Air Conditioner On, Off) | 1 |
| 26***02 | Swivel Group; -Circle Drive | 1 |
293-4267 Tank & Mtg Gp-Hydraulic
| 27***42 | Control Group-Electrohydraulic; -With Auxiliary Lever | 1 |
| 29***67 | Tank & Mtg Group-Hydraulic | 1 |
| 33***86 | Harness As-Sensor | 1 |
275-6574 Tank Gp-Hydraulic
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 19***15 | Kit-Receptacle; (12-Pin) | 1 |
| 24***37 | Control Group-Joystick; (Electronic Control) | 1 |
261-3278 Valve Gp-Bank 3 -Rear
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 2 |
| 22***09 | Screw-Truss Head; (M4x0.7x14-mm) | 3 |
| 24***40 | Control As-Proportional; (Rear Implement) | 1 |
261-3281 Valve Gp-Bank 4 -Rear
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 24***33 | Boot | 1 |
| 26***81 | Valve Group-Bank 4; -Rear | 1 |
261-3272 Valve Gp-Bank 5 -Front
| 12***67 | Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire) | 23 |
| 15***74 | Kit-Receptacle; (4-Pin) | 1 |
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
261-3273 Valve Gp-Bank 6 -Front
| 16***05 | Seal | 9 |
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 24***33 | Boot | 1 |
291-9518 Valve Gp-Bank 6 -Rear
| 15***74 | Kit-Receptacle; (4-Pin) | 1 |
| 16***05 | Seal | 5 |
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
261-3283 Valve Gp-Bank 6 -Rear
| 15***74 | Kit-Receptacle; (4-Pin) | 1 |
| 16***05 | Seal | 5 |
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
261-3274 Valve Gp-Bank 7 -Front
| 16***05 | Seal | 9 |
| 17***91 | Kit-Receptacle; (12-Pin)(12 Pin) | 1 |
| 24***33 | Boot | 1 |
158-9956 Valve Gp-Check -Brake, Hydraulic Fan
| 15***56 | Valve Group-Check; -Pilot, Differential Lock Oil | 1 |
| 28***57 | Plate | 1 |
| 28***58 | Cover | 1 |
6e-4701 Valve Gp-Check
| 12***12 | Screw-Pan Head; (8-16x0.32-In) | 1 |
| 30***68 | Control As-Electronic; (Messenger) | 1 |
| 6E***01 | Valve Group-Check; -Pilot Oil | 1 |
259-6903 Valve Gp-Control -Sideshift
| 25***64 | Wiring Group-Monitor; -Cd700 Display | 1 |
| 25***03 | Valve Group-Control; -Sideshift | 1 |
| 28***34 | Display Group-Monitor; -Cd700c | 1 |
259-6912 Valve Gp-Control -Articulation
| 23***09 | Receptacle As-Connector; (4-Pin) | 1 |
| 25***12 | Valve Group-Control; -Articulation | 1 |
| 8T***37 | Plug-Seal; (40 Pin Connector) | 1 |
259-6910 Valve Gp-Control -Plow, Bulldozer Lift
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 6 |
| 19***31 | Adapter; (Compact) | 1 |
| 24***16 | Display Group-Monitor; (Cd700) | 1 |
259-6907 Valve Gp-Control -Circle Drive
| 25***67 | Wiring Group-Monitor; -Cd610 Display | 1 |
| 25***07 | Valve Group-Control; -Circle Drive | 1 |
| 29***09 | Display Group-Monitor; -Cd610 | 1 |
259-6913 Valve Gp-Control -Ripper
| 25***13 | Valve Group-Control; -Ripper | 1 |
| 28***30 | Display Group-Monitor; (Cd610) | 1 |
| 29***11 | Case-Carrying | 1 |
290-0594 Valve Gp-Control -Wing Tilt
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 11***24 | Button | 8 |
| 11***58 | Washer; (6.5x17x1-mm Thk) | 5 |
259-6915 Valve Gp-Control -Wing Tilt
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***08 | Bumper; (Conical) | 1 |
| 11***24 | Button | 8 |
259-6896 Valve Gp-Control -Blade Tip
| 23***45 | Plate | 1 |
| 23***72 | Cushion As | 1 |
| 25***96 | Valve Group-Control; -Blade Tip | 1 |
261-3270 Valve Gp-Control -Centershift
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***08 | Bumper; (Conical) | 1 |
| 11***58 | Washer; (6.5x17x1-mm Thk) | 6 |
259-6914 Valve Gp-Control -Wing Lift
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***08 | Bumper; (Conical) | 1 |
| 11***58 | Washer; (6.5x17x1-mm Thk) | 6 |
259-6909 Valve Gp-Control -Bulldozer Lift, Plow
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 5 |
| 25***43 | Connector Group-Electronic; (Work Area Visual System) | 1 |
261-3268 Valve Gp-Control -Blade Lift
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***08 | Bumper; (Conical) | 1 |
| 11***58 | Washer; (6.5x17x1-mm Thk) | 6 |
261-3271 Valve Gp-Control -Wheel Lean
| 10***08 | Bumper; (Conical) | 1 |
| 11***24 | Button | 8 |
| 11***58 | Washer; (6.5x17x1-mm Thk) | 6 |
277-2132 Valve Gp-Diverter -Fan Drive
| 14***12 | Filter Element-Cab Air; (Cab Heater, Air Conditioner) | 1 |
| 21***60 | Filter Element-Air; (Cab Heater, Air Conditioner) | 1 |
| 22***00 | Filter Element-Cab Air; (Activated Charcoal) | 1 |
252-8038 Valve Gp-Pressure Reducing -Primary Steering
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 1 |
| 13***79 | Bracket | 1 |
| 17***35 | Motor Group-Electric; -Circulating Fan | 1 |
345-6946 Valve Gp-Pressure Reducing
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 13***01 | Clip | 1 |
| 14***04 | Horn As | 1 |
345-4472 Valve Gp-Pressure Reducing
| 17***34 | Fan Group-Circulating; -Defrost | 1 |
| 23***11 | Switch As-Rocker; (Fan Blower Speed) | 1 |
| 32***00 | Plate As | 1 |
271-6847 Valve Gp-Pump Control -Pressure, Flow Compensator
| 17***75 | Horn As; (24-Volt, High Tone) | 1 |
| 27***47 | Valve Group-Pump Control; -Pressure, Flow Compensator-Implement | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
133-5330 Valve Gp-Relief
| 09***78 | Pin-Spring | 1 |
| 10***24 | Kit-Indicator; (Weight Adjustment)(Suspension Seat) | 1 |
| 10***79 | Kit-Bumper; (Weight Adjustment)(Suspension Seat) | 1 |
251-8330 Valve Gp-Relief
| 03***14 | Screw; (10-32x1-In) | 3 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 6 |
| 10***03 | Fastener | 2 |
257-8414 Valve Gp-Shuttle -Brake Accumulator
| 08***91 | Bolt; (M10x1.5x55-mm) | 1 |
| 10***93 | Valve As | 1 |
| 10***94 | Gasket | 1 |
189-8627 Valve Gp-Solenoid
| 18***27 | Valve Group-Solenoid | 1 |
| 5K***79 | Bolt-Round Head; (3/8-16x11-In) | 1 |
| 5P***74 | Mirror; (Rear View) | 1 |
278-1799 Valve Gp-Solenoid
| 10***59 | Mirror Group-Rear View; -Interior | 1 |
| 27***99 | Valve Group-Solenoid | 1 |
152-8346 Valve Gp-Solenoid
| 09***44 | Elbow | 1 |
| 14***83 | Spacer; (11x19x48-mm Thk) | 1 |
| 14***42 | Connector Group | 1 |
3e-9205 Valve Gp-Solenoid
| 13***53 | Hose; (192.5cm) (X2) | 0 |
| 27***43 | Plate As | 1 |
| 27***44 | Plate | 1 |
279-6521 Valve Gp-Solenoid & Manifold -Blade Cushion
| 12***86 | Block | 4 |
| 18***58 | Bolt; (M10x1.5x60-mm) | 8 |
| 25***58 | Mirror As; (Exterior) | 2 |
308-0936 Valve Gp-Steering
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***86 | Block | 4 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
Implements
281-4299 Circle & Beam As
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***86 | Block | 4 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
259-4500 Circle Gp
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 5 |
| 25***00 | Circle Group | 1 |
257-4930 Drawbar Gp
| 13***11 | Motor Group-Window Wiper; (24-Volt, 2-Speed)(Front) | 1 |
| 20***23 | Cap; (Wiper) | 2 |
| 25***30 | Drawbar Group | 1 |
265-6738 Plate Gp-Push
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 5 |
| 26***23 | Cap-Wiper | 1 |
Lubrication System
247-9665 Base Gp-Oil Filter -Engine
| 06***55 | Seal-O-Ring (Id=47.22mm) | 4 |
| 06***97 | Cap-Oil Filler; (Engine Oil) | 1 |
| 24***65 | Base Group-Oil Filter; -Engine | 1 |
247-9664 Base Gp-Oil Filter -Engine
| 06***55 | Seal-O-Ring (Id=47.22mm) | 4 |
| 24***45 | Cap As-Engine Oil Filler; (Engine Oil) | 1 |
| 24***64 | Base Group-Oil Filter; -Engine | 1 |
267-0007 Breather Gp -Crankcase
| 1R***08 | Filter As-Engine Oil; (Advanced Efficiency)(High Efficiency) | 1 |
| 26***07 | Breather Group; -Crankcase | 1 |
267-0008 Breather Gp -Crankcase
| 10***28 | Cover | 1 |
| 10***29 | Name-Plate (Lubrication), Adapter | 1 |
| 13***00 | Spacer; (11x25x50-mm Thk) | 4 |
117-2786 Cover Gp-Oil Filter Base -Engine
| 11***86 | Cover Group-Oil Filter Base; -Engine | 1 |
| 22***39 | Hose-Fumes Disposal | 1 |
| 7L***03 | Clip | 1 |
231-0151 Filler Gp-Engine Oil
| 20***09 | Plug | 3 |
| 21***31 | Stud; (M10x1.5-Thd)(M10x1.5-Thd) | 1 |
| 23***51 | Filler Group-Engine Oil | 1 |
244-8676 Filler Gp-Engine Oil -Left Front
| 10***29 | Stud; (M10x1.5-Thd) | 1 |
| 20***09 | Plug | 3 |
| 24***76 | Filler Group-Engine Oil; -Left Front | 1 |
291-6299 Filter Gp-Engine Oil
| 29***99 | Filter Group-Engine Oil | 1 |
| 6D***46 | Seal-O-Ring (Id=101.27mm) | 1 |
| 6V***17 | Bolt; (M8x1.25x30-mm)(Location Z) | 4 |
262-0925 Filter Gp-Engine Oil
| 06***58 | Seal-O-Ring; (Oil Pan Drain Plug) | 1 |
| 11***26 | Cap-Dust; (Engine Oil Change) | 1 |
| 11***27 | Fitting; (Quick Disconnect, Male) | 1 |
231-3492 Filter Gp-Engine Oil
| 19***18 | Gasket; (Coated Metal) | 1 |
| 19***19 | Gasket; (Coated Metal) | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
258-4484 Fumes Disposal Gp
| 23***20 | Pump Group-Engine Oil | 1 |
| 23***48 | Tube As | 1 |
| 23***51 | Elbow-Oil Pump | 1 |
262-0596 Gauge Gp-Oil Level (Dipstick) -Engine
| 13***45 | Hose; (8cm) | 1 |
| 22***75 | Seal; (Water Pump Outlet) | 1 |
| 23***18 | Elbow | 1 |
224-8170 Lines Gp-Turbocharger Oil
| 16***71 | Washer; (22x60x20-mm Thk) | 8 |
| 22***70 | Lines Group-Turbocharger Oil | 1 |
| 24***64 | Aftercooler Group-Air | 1 |
292-9680 Oil Change Gp-High Speed -Engine
| 24***01 | Spider As-Fan | 1 |
| 24***09 | Adapter-Fan | 1 |
| 25***90 | Kit-Seal; (Hydraulic Fan Motor) | 1 |
233-5220 Pump Gp-Engine Oil
| 23***20 | Pump Group-Engine Oil | 1 |
| 24***01 | Spider As-Fan | 1 |
| 24***09 | Adapter-Fan | 1 |
233-5221 Pump Gp-Engine Oil
| 23***21 | Pump Group-Engine Oil | 1 |
| 24***01 | Spider As-Fan | 1 |
| 24***09 | Adapter-Fan | 1 |
Machine Arrangement
349-2556 Common Ar
| 25***72 | Insulation Group-Sound Suppr; -Engine Enclosure | 1 |
| 27***65 | Suppression Group-Sound; -Rear Frame | 1 |
| 29***11 | Reflector Group; -Machine | 1 |
285-0103 Common Ar
| 23***07 | Cab Ar | 1 |
| 24***31 | Lines Group-Centershift Lock | 1 |
| 24***32 | Pump & Mtg Group-Piston; -Implement, Steering | 1 |
352-3815 Option Ar-Regional
| 23***95 | Mirror Group-Rear View; -Exterior | 1 |
| 25***35 | Control Ar-Hydraulic; -Ripper | 1 |
| 26***58 | Ripper Ar | 1 |
251-2054 Option Ar-Regional
| 22***48 | Plate-Certification; (Machine) | 1 |
| 25***72 | Insulation Group-Sound Suppr; -Engine Enclosure | 1 |
| 25***54 | Option Ar-Regional | 1 |
352-3819 Option Ar-Work Tool
| 23***27 | Installation Group-Warning Beacon | 1 |
| 23***37 | Fan Group-Circulating; -With Switch | 1 |
| 23***39 | Wiper Group-Window; -Rear | 1 |
261-0124 Snow Ar-Motor Grader
| 11***65 | Plug Group-Cylinder Block; -Oil Gallery, End | 1 |
| 11***66 | Damper Group | 1 |
| 11***71 | Fastener Group-Damper & Pulley | 1 |
Operator Station
173-1028 Adjuster Gp-Seat
| 10***55 | Cover-Speaker | 2 |
| 10***81 | Cable As-Coaxial | 1 |
| 17***28 | Adjuster Group-Seat; -Seat | 1 |
237-3970 Air Compressor Gp-Seat
| 23***70 | Air Compressor Group-Seat | 1 |
| 28***55 | Antenna As | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 4 |
274-1525 Air Conditioner & Mounting Gp
| 11***31 | Mount Assem. | 8 |
| 26***30 | Pin As | 4 |
| 27***25 | Air Conditioner & Mounting Group | 1 |
267-5034 Air Conditioner Gp
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 21***14 | Switch As-Limit; (Seat Adjustment) | 1 |
| 26***81 | Clip | 2 |
274-1527 Air Conditioner Gp
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 8 |
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 20 |
| 11***27 | Screw-Machine; (M6x1x30-mm) | 6 |
267-5033 Air Conditioner Gp
| 16***83 | Knob-Lumbar | 1 |
| 25***28 | Plug | 3 |
| 26***33 | Air Conditioner Group | 1 |
263-2555 Air Conditioner Gp
| 22***09 | Screw-Truss Head; (M4x0.7x14-mm) | 2 |
| 25***47 | Grommet | 1 |
| 26***55 | Air Conditioner Group | 1 |
292-0609 Armrest Gp -Rh
| 09***23 | Screw; (M3x0.5x10-mm) | 4 |
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 4 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 8 |
292-0617 Armrest Gp -Lh
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***06 | Receptacle Kit; (Includes Wedge And Receptacle Assem.) | 1 |
265-8937 Bracket Gp-Mounting -Fuse Panel
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 13***39 | Nut; (U-Type Retainer) | 2 |
233-3107 Cab Ar
| 11***09 | Knob-Control | 2 |
| 11***58 | Washer; (6.5x17x1-mm Thk) | 11 |
| 23***07 | Cab Ar | 1 |
278-1154 Coil Gp-Evaporator & Heater -Air Conditioner, Heater
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 15***39 | Nut-Weld; (M6x1-Thd)(M6x1-6h Thd) | 2 |
| 17***11 | Nut; (5/8-24-Thd) | 1 |
183-5106 Compressor Gp-Refrigerant
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 17***11 | Nut; (5/8-24-Thd) | 1 |
| 18***06 | Compressor Group-Refrigerant; -Air Conditioner | 1 |
357-9151 Control & Mtg Gp-Joystick
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 4 |
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 14 |
| 11***58 | Washer; (6.5x17x1-mm Thk) | 9 |
309-5955 Control & Mtg Gp-Joystick -Operator Platform
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 4 |
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 14 |
| 11***58 | Washer; (6.5x17x1-mm Thk) | 9 |
233-3146 Control & Mtg Gp-Joystick
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 17***11 | Nut; (5/8-24-Thd) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 1 |
233-3291 Control Gp-Air & Temperature
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 16***43 | Sensor Group-Position; -Brake Pedal | 2 |
| 17***59 | Switch Group-Limit; -Brake Pedal, Xmsn Mdl Cont | 2 |
233-3147 Control Gp-Electrohydraulic -With Auxiliary Lever
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 17***59 | Switch Group-Limit; -Brake Pedal, Xmsn Mdl Cont | 2 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 3 |
272-8442 Control Gp-Electrohydraulic -With Auxiliary Lever
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***24 | Button | 4 |
| 19***32 | Motor As-Blower; (24-Volt, Cab Air) | 1 |
299-0874 Control Gp-Electrohydraulic
| 13***90 | Bushing; (Radio Mount) | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 17***37 | Connector; (Radio) | 1 |
308-5204 Control Gp-Joystick -Lh
| 13***90 | Bushing; (Radio Mount) | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 20***28 | Harness As-Radio; (Fm) | 1 |
300-6464 Control Gp-Joystick -Lh
| 19***54 | Sleeve | 1 |
| 30***64 | Control Group-Joystick; -Lh | 1 |
356-3609 Control Gp-Joystick -Rh
| 19***54 | Sleeve | 1 |
| 35***09 | Control Group-Joystick; -Rh | 1 |
356-3607 Control Gp-Joystick -Lh
| 13***90 | Bushing; (Radio Mount) | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 20***28 | Harness As-Radio; (Fm) | 1 |
348-6995 Control Gp-Joystick -Rh
| 13***90 | Bushing; (Radio Mount) | 1 |
| 14***81 | Knob-Select; (Radio) | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
308-5203 Control Gp-Joystick -Rh
| 13***90 | Bushing; (Radio Mount) | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 16***26 | Radio Group; (Am/Fm Cd Player) | 1 |
360-2987 Control Gp-Joystick
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 1 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 1 |
| 17***90 | Spring | 1 |
233-3118 Control Gp-Joystick -Rh
| 19***54 | Sleeve | 1 |
| 23***18 | Control Group-Joystick; -Rh | 1 |
308-3869 Control Gp-Unprgmed Monitor -Messenger
| 23***09 | Panel; (Lh) | 1 |
| 24***73 | Panel; (Rh) | 1 |
| 25***47 | Grommet | 3 |
283-7959 Cover Gp-Cab
| 23***09 | Panel; (Lh) | 1 |
| 24***73 | Panel; (Rh) | 1 |
| 28***59 | Cover Group-Cab | 1 |
252-1805 Cushion Gp-Arm
| 25***05 | Cushion Group-Arm | 1 |
292-7980 Display Ar-Monitor -Cd610
| 23***83 | Seat Group-Suspension; -Air | 1 |
| 29***80 | Display Ar-Monitor; -Cd610 | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
292-7975 Display Ar-Monitor -Cd700
| 24***40 | Seat Group-Suspension | 1 |
| 29***75 | Display Ar-Monitor; -Cd700 | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 4 |
278-0668 Display Gp-Camera -Work Area Visual System
| 0T***44 | Bolt (1.25" Long) | 1 |
| 17***37 | Spacer; (11.7x19.8x20.3-mm Thk)(Lh Seat Side) | 1 |
| 20***88 | Bolt; (7/16-20) (44.5mml) | 1 |
286-9124 Display Gp-Monitor -Light Bar
| 17***87 | Setscrew; (1/4-20-Thd) | 4 |
| 17***35 | Block Kit; (Includes Bolt, Washers, Blocks And Setscrews) | 1 |
| 20***03 | Washer-Hard; (10.2x22.22x2.38-mm Thk) | 2 |
292-0309 Display Gp-Monitor -Cd610
| 16***65 | Suspension Group-Seat | 1 |
| 17***87 | Setscrew; (1/4-20-Thd) | 4 |
| 17***35 | Block Kit; (Includes Bolt, Washers, Blocks And Setscrews) | 1 |
286-0134 Display Gp-Monitor -Cd700c
| 09***43 | Pin-Cotter | 2 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 8 |
| 17***30 | Screw-Button Head; (3/8-16x1-In) | 6 |
294-1024 Door Gp-Cab -Rh
| 10***03 | Fastener | 26 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***11 | Screw-Machine; (3/8-16x0.75-In) | 1 |
294-1025 Door Gp-Cab -Alternate Exit
| 14***95 | Hose; (650-cm Each) | 0 |
| 24***04 | Switch-Liquid Level; (Washer Fluid) | 1 |
| 25***79 | Tank-Washer | 1 |
294-1023 Door Gp-Cab -Lh
| 11***58 | Washer; (6.5x17x1-mm Thk) | 2 |
| 13***00 | Clip; (Tab) | 4 |
| 16***14 | Knob | 1 |
244-2701 Duct & Filter Gp-Cab Air
| 14***95 | Hose; (650-cm Each) | 0 |
| 24***01 | Duct & Filter Group-Cab Air | 1 |
| 25***79 | Tank-Washer | 1 |
233-3137 Fan Gp-Circulating
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 2 |
| 23***37 | Fan Group-Circulating; -With Switch | 1 |
170-5334 Fan Gp-Circulating -Defrost
| 17***34 | Fan Group-Circulating; -Defrost | 1 |
| 23***35 | Glass-Rear | 1 |
| 23***36 | Glass; (Lh) | 1 |
300-1275 Horn Gp-Air
| 11***58 | Washer; (6.5x17x1-mm Thk) | 6 |
| 22***69 | Indicator-Level | 1 |
| 29***12 | Glass-Front | 1 |
300-1274 Horn Gp-Electric
| 23***35 | Glass-Rear | 1 |
| 30***74 | Horn Group-Electric | 1 |
| 30***71 | Glass; (Rh) | 1 |
174-2231 Housing Gp-Seat Suspension
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 2 |
| 17***31 | Housing Group-Seat Suspension | 1 |
294-0995 Liner Gp-Cab
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 3 |
| 11***58 | Washer; (6.5x17x1-mm Thk) | 3 |
| 13***88 | Clip | 3 |
283-7769 Lines Gp-Air Conditioner
| 11***69 | Arm As-Window Wiper; (Rear) | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
| 14***33 | Blade As-Wiper; (500-mm)(Rear) | 1 |
273-1878 Lines Gp-Heater
| 11***69 | Arm As-Window Wiper; (Rear) | 1 |
| 14***33 | Blade As-Wiper; (500-mm)(Rear) | 1 |
| 18***78 | Hose; (85-cm Each) | 0 |
283-7768 Lines Gp-Heater
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 4 |
351-4490 Mirror Gp
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 5 |
233-3296 Mirror Gp-Rear View -Exterior, Heated
| 06***60 | Ring-Retaining | 1 |
| 10***80 | Bit Group | 64 |
| 15***14 | Adapter; (4-Ft)(Outside) | 4 |
105-9659 Mirror Gp-Rear View -Interior
| 10***59 | Mirror Group-Rear View; -Interior | 1 |
| 1J***62 | Bolt-Plow | 4 |
| 2J***06 | Nut Front Support To Frame; Nut-Front Support To Frame | 10 |
233-3295 Mirror Gp-Rear View -Exterior
| 06***60 | Ring-Retaining | 1 |
| 10***83 | Bit As | 64 |
| 15***14 | Adapter; (4-Ft)(Outside) | 4 |
233-3208 Mirror Gp-Rear View -Interior
| 23***08 | Mirror Group-Rear View; -Interior | 1 |
| 25***70 | Moldboard As | 1 |
295-1120 Motor Gp-Window Wiper -Front
| 1J***62 | Bolt-Plow | 20 |
| 29***20 | Motor Group-Window Wiper; -Front | 1 |
| 2J***06 | Nut Front Support To Frame; Nut-Front Support To Frame | 34 |
250-5529 Motor Gp-Window Wiper -Rear
| 25***29 | Motor Group-Window Wiper; -Rear | 1 |
| 2J***06 | Nut Front Support To Frame; Nut-Front Support To Frame | 34 |
| 4T***36 | Edge-Cutting; Curved 2.44 M (8 Ft.) 203.2 mm (8 In.) Wide & 25.4 mm (1 In.) Thick | 2 |
330-5016 Motor Gp-Window Wiper
| 1J***62 | Bolt-Plow | 20 |
| 2J***06 | Nut Front Support To Frame; Nut-Front Support To Frame | 34 |
| 33***16 | Motor Group-Window Wiper | 1 |
233-3122 Mounting Gp-Antenna -Radio
| 23***22 | Mounting Group-Antenna; -Radio | 1 |
| 4T***17 | Edge-Cutting; Cutting Edge | 1 |
278-0684 Mounting Gp-Antenna -Satellite Radio
| 11***34 | Spacer; (3-mm Thk) | 3 |
| 13***23 | Extension-Rh | 1 |
| 1J***62 | Bolt-Plow; (3/4-10x4.25-In) | 8 |
233-3206 Mounting Gp-Cab
| 11***34 | Spacer; (3-mm Thk) | 3 |
| 13***24 | Extension-Lh | 1 |
| 1J***62 | Bolt-Plow; (3/4-10x4.25-In) | 8 |
299-0881 Mounting Gp-Control -With Enclosure
| 18***25 | Bolt; (M20x2.5x170-mm) | 4 |
| 26***97 | Lock | 2 |
| 26***98 | Lock | 2 |
274-9254 Mounting Gp-Platform
| 12***75 | Cam As | 2 |
| 12***73 | Link As | 2 |
| 1K***72 | Locknut Horn To Guard | 2 |
292-6402 Pan Gp-Backrest -Lumbar
| 11***29 | Bolt; (M24x3x100-mm) | 12 |
| 12***75 | Cam As | 2 |
| 17***11 | Locknut; (M16x2-Thd) | 4 |
292-9237 Pan Gp-Backrest -Lumbar
| 11***64 | Cylinder Group-Ripper | 1 |
| 20***01 | Mounting Group-Ripper | 1 |
| 20***36 | Lines Group-Ripper | 1 |
243-6737 Pan Gp-Seat -Lumbar
| 11***64 | Cylinder Group-Ripper | 1 |
| 24***37 | Pan Group-Seat; -Lumbar | 1 |
| 26***62 | Mounting Group-Ripper | 1 |
293-4200 Panel Gp-Cab -Hvac
| 19***86 | Film; (Safety) (To Right And Left Of Fuel Tank) | 2 |
| 29***00 | Panel Group-Cab; -Heating Ventilation Air Conditioning | 1 |
| 29***71 | Link As | 1 |
319-1617 Panel Gp-Control -Accugrade
| 10***12 | Film-Instruction; (Alternate Exit, Remove Window) | 1 |
| 21***02 | Film-Warning; (No Weld, No Drill, Read Omm) | 1 |
| 22***54 | Film-Warning; (Universal, Read Omm, Intl) | 1 |
314-3323 Panel Gp-Control -Accugrade, Lh
| 25***61 | Film-Information; (Cat Power, Acert Technology) | 2 |
| 28***33 | Film-Identification; (Variable Horsepower) | 2 |
| 28***02 | Film-Identification; (Caterpillar, Rear) | 1 |
249-4103 Panel Gp-Control -Lh
| 11***58 | Pin; (G.E.T.) | 1 |
| 11***59 | Retainer Assembly; (G.E.T.) | 1 |
| 24***03 | Panel Group-Control; -Lh | 1 |
249-4104 Panel Gp-Control -Rh
| 11***52 | Plate & Film Group; -Engine Information | 1 |
| 24***04 | Panel Group-Control; -Rh | 1 |
| 28***33 | Film-Identification; (Variable Horsepower) | 2 |
276-8498 Panel Gp-Control -Variable Blade Float
| 11***52 | Plate & Film Group; -Engine Information | 1 |
| 24***51 | Configuration-Premium | 1 |
| 27***98 | Panel Group-Control; -Variable Blade Float | 1 |
322-3834 Panel Gp-Control
| 10***12 | Film-Instruction; (Alternate Exit, Remove Window) | 1 |
| 21***02 | Film-Warning; (No Weld, No Drill, Read Omm) | 1 |
| 22***05 | Film; (Warning) (Universal) (On Lh Post Inside Cab) | 1 |
233-3280 Panel Gp-Instrument
| 10***61 | Film-Instruction; (Engine Shutdown) | 1 |
| 11***78 | Film-Stripe; (Red)(1500 cm)(Red) | 0 |
| 12***80 | Film-Instruction; (Hydraulic Tank Oil Drain) | 1 |
265-8943 Pedal Gp-Brake, Xmsn & Gov
| 25***54 | Electronics Group-Monitor; -Dutch, English, French, German, Portuguese, Spanish | 1 |
| 26***43 | Pedal Group-Brake, Xmsn & Gov | 1 |
| 26***84 | Film Group-International | 1 |
269-3284 Pressurizer Gp-Cab
| 25***54 | Electronics Group-Monitor; -Dutch, English, French, German, Portuguese, Spanish | 1 |
| 26***84 | Film Group-International | 1 |
| 26***84 | Pressurizer Group-Cab | 1 |
233-3123 Radio Gp -Am/Fm/Wb
| 23***23 | Radio Group; -Am/Fm/Wb | 1 |
| 25***54 | Electronics Group-Monitor; -Dutch, English, French, German, Portuguese, Spanish | 1 |
| 26***84 | Film Group-International | 1 |
294-0989 Radio Gp -Am/Fm/Wb/Cd Player
| 26***84 | Film Group-International | 1 |
| 29***89 | Radio Group; -Am/Fm/Wb/Cd Player | 1 |
| 29***32 | Plate & Film Group | 1 |
294-0990 Radio Gp -Am/Fm/Wb/Xm/Cd Player
| 26***84 | Film Group-International | 1 |
| 29***90 | Radio Group; -Am/Fm/Wb/Xm/Cd Player | 1 |
| 29***32 | Plate & Film Group | 1 |
284-8955 Radio Gp -Am/Fm/Wb/Sirius/ Cd Player
| 25***54 | Electronics Group-Monitor; -Dutch, English, French, German, Portuguese, Spanish | 1 |
| 26***84 | Film Group-International | 1 |
| 28***55 | Radio Group; -Am/Fm/Wb/Sirius/ Cd Player | 1 |
294-0991 Radio Gp -Am/Fm/Wb/Sirius/Cd Player
| 26***84 | Film Group-International | 1 |
| 29***91 | Radio Group; -Am/Fm/Wb/Sirius/Cd Player | 1 |
| 29***32 | Plate & Film Group | 1 |
284-8953 Radio Gp -Am/Fm/Wb/Cd Player
| 25***54 | Electronics Group-Monitor; -Dutch, English, French, German, Portuguese, Spanish | 1 |
| 26***84 | Film Group-International | 1 |
| 28***53 | Radio Group; -Am/Fm/Wb/Cd Player | 1 |
331-5292 Radio Gp -Am, Fm
| 26***84 | Film Group-International | 1 |
| 29***32 | Plate & Film Group | 1 |
| 30***60 | Electronics Group-Monitor; -English, Greek, Hebrew, Italian, Portuguese, Turkish | 1 |
210-2270 Recliner Gp-Seat
| 21***70 | Recliner Group-Seat; -Cloth | 1 |
| 26***84 | Film Group-International | 1 |
| 29***32 | Plate & Film Group | 1 |
233-3133 Roof Gp-Cab
| 23***33 | Roof Group-Cab | 1 |
| 26***84 | Film Group-International | 1 |
| 29***32 | Plate & Film Group | 1 |
254-1550 Screen Gp-Sun -Rear Window
| 25***50 | Screen Group-Sun; -Rear Window | 1 |
| 26***84 | Film Group-International | 1 |
| 29***32 | Plate & Film Group | 1 |
233-3116 Seat & Mounting Gp
| 23***16 | Seat & Mounting Group | 1 |
| 26***84 | Film Group-International | 1 |
| 29***32 | Plate & Film Group | 1 |
233-3150 Seat & Mounting Gp
| 23***50 | Seat & Mounting Group | 1 |
| 26***84 | Film Group-International | 1 |
| 29***32 | Plate & Film Group | 1 |
244-5002 Seat Gp -Cloth
| 24***02 | Seat Group; -Cloth | 1 |
| 26***84 | Film Group-International | 1 |
| 29***32 | Plate & Film Group | 1 |
244-5001 Seat Gp -Cloth
| 24***01 | Seat Group; -Cloth | 1 |
| 26***84 | Film Group-International | 1 |
| 29***32 | Plate & Film Group | 1 |
243-6740 Seat Gp-Suspension
| 18***30 | Strap Wrench Assem. | 1 |
| 1P***45 | Gauge Group-Pressure | 1 |
| 1S***59 | Socket Wrench (1/2 Inch Opening) | 1 |
238-6683 Seat Gp-Suspension
| 23***83 | Seat Group-Suspension; -Air | 1 |
| 25***54 | Electronics Group-Monitor; -Dutch, English, French, German, Portuguese, Spanish | 1 |
| 26***84 | Film Group-International | 1 |
342-8961 Support Gp-Control -Operator Platform
| 34***61 | Support Group-Control; -Operator Platform | 1 |
233-3225 Support Gp-Control -Joystick, Rh
| 23***25 | Support Group-Control; -Joystick, Rh | 1 |
233-3224 Support Gp-Control -Joystick, Lh
| 23***24 | Support Group-Control; -Joystick, Lh | 1 |
160-7165 Suspension Gp-Seat
| 16***65 | Suspension Group-Seat | 1 |
256-8768 Suspension Gp-Seat -Air, Heated
| 25***68 | Suspension Group-Seat; -Air, Heated | 1 |
248-3164 Tank Gp-Window Washer
| 24***64 | Tank Group-Window Washer | 1 |
294-0994 Window Gp-Cab -Front
| 29***94 | Window Group-Cab; -Front | 1 |
260-6724 Window Gp-Cab -Rear, Lh, Rh, Side Wipers
| 26***24 | Window Group-Cab; -Rear, Lh, Rh, Side Wipers | 1 |
300-1870 Window Gp-Cab -Side, Rear, Rh, Lh
| 30***70 | Window Group-Cab; -Side, Rear, Rh, Lh, Air Inlet Tube | 1 |
300-1873 Window Gp-Cab -Rear, Lh, Rh, Side Wipers
| 30***73 | Window Group-Cab; -Rear, Lh, Rh, Side Wipers | 1 |
233-3113 Window Gp-Cab -Rear, Lh, Rh
| 23***13 | Window Group-Cab; -Rear, Lh, Rh | 1 |
233-3138 Wiper & Washer Gp-Window -Front
| 23***38 | Wiper & Washer Group-Window; -Front | 1 |
233-3188 Wiper Gp-Window -Side, Rh, Lh
| 23***88 | Wiper Group-Window; -Side, Rh, Lh | 1 |
295-1114 Wiper Gp-Window -Door, Lh
| 29***14 | Wiper Group-Window; -Door, Lh | 1 |
295-1113 Wiper Gp-Window -Door, Rh
| 29***13 | Wiper Group-Window; -Door, Rh | 1 |
233-3139 Wiper Gp-Window -Rear
| 23***39 | Wiper Group-Window; -Rear | 1 |
Power Train
251-2006 Autoshift Ar
| 06***69 | Stem | 1 |
| 14***07 | Clamp-Hose | 2 |
| 14***23 | Connector As. | 1 |
284-5026 Axle Gp-Rear
| 28***16 | Bolt; (M30x3.5x70-mm) | 60 |
| 28***82 | Washer-Hard; (33x56x6-mm Thk) | 60 |
| 28***26 | Axle Group-Rear | 1 |
249-2308 Base Gp-Oil Filter -Hydraulic Tank Return
| 11***74 | Seal-O-Ring | 1 |
| 16***68 | Seal-O-Ring | 5 |
| 1B***05 | Key; (Woodruff) | 2 |
333-9310 Base Gp-Oil Filter -Power Train
| 1T***68 | Seal-O-Ring; (Fuel Injection Pump) | 1 |
| 25***73 | Filter-Magnetic; (Transmission Charging) | 1 |
| 25***74 | Screen-Suction; (Transmission Scavenge) | 1 |
249-2304 Base Gp-Oil Filter -Power Train
| 11***74 | Seal-O-Ring | 1 |
| 24***66 | Pump Group-Gear | 1 |
| 24***04 | Base Group-Oil Filter; -Transmission | 1 |
272-8011 Carrier Gp-Final Drive
| 25***73 | Filter-Magnetic; (Transmission Charging) | 1 |
| 25***74 | Screen-Suction; (Transmission Scavenge) | 1 |
| 27***11 | Carrier Group-Final Drive | 1 |
253-8429 Case & Parts Gp-Transmission
| 25***29 | Case & Parts Group-Transmission | 1 |
| 25***04 | Universal Joint Group | 1 |
| 25***05 | Shaft | 1 |
6g-1740 Chain Gp-Drive
| 24***46 | Gear; (38-Teeth) | 1 |
| 24***52 | Gear; (45-Teeth) | 1 |
| 24***73 | Spacer; (76x97.55x44.75-mm Thk) | 1 |
246-8728 Clutch Gp-Transmission -Forward
| 24***28 | Clutch Group-Transmission; -Forward | 1 |
| 26***72 | Step As | 1 |
| 26***76 | Cover | 4 |
246-8737 Clutch Gp-Transmission -High, Low
| 24***65 | Pump Group-Gear | 1 |
| 24***28 | Clutch Group-Transmission; -Forward | 1 |
| 24***31 | Clutch Group-Transmission; -Reverse, Second | 1 |
246-8731 Clutch Gp-Transmission -Reverse, Second
| 24***31 | Clutch Group-Transmission; -Reverse, Second | 1 |
| 29***18 | Tire Group | 6 |
246-8734 Clutch Gp-Transmission -1st, 3rd
| 22***85 | Wheel Group | 1 |
| 24***34 | Clutch Group-Transmission; -1st, 3rd | 1 |
| 2D***43 | Seal-O-Ring | 1 |
356-2980 Control Gp-Differential Lock
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
| 21***68 | Seal-O-Ring; (11.89-mm Id) | 1 |
| 21***73 | Nut; (1/2-28-Thd) | 1 |
288-9614 Control Gp-Differential Lock
| 24***81 | Flange | 1 |
| 24***11 | Cover-Base | 1 |
| 24***12 | Kit-Seal; (Solenoid Valve) | 1 |
253-8428 Control Gp-Transmission Hyd
| 11***50 | Cover | 1 |
| 16***77 | Plug As | 1 |
| 16***67 | Fitting As; (Quick Disconnect, Male)(Quick Disconnect) | 1 |
240-5403 Cooler Gp-Transmission Oil
| 14***17 | Wheel & Tire Group | 6 |
| 24***03 | Cooler Group-Transmission Oil | 1 |
250-0154 Coupling Gp-Torsional
| 14***33 | Wheel & Tire Group | 6 |
| 25***54 | . Link, Coupling Group-Torsional | 1 |
260-9479 Cover Gp-Shipping
| 14***34 | Wheel & Tire Group | 6 |
| 26***79 | Cover Group-Shipping | 1 |
287-8262 Differential Gp
| 14***38 | Wheel & Tire Group | 6 |
| 28***62 | Differential Group | 1 |
284-5028 Drive Gp-Final -Rh
| 16***93 | Wheel & Tire Group | 6 |
| 28***28 | Drive Group-Final; -Rh | 1 |
284-5030 Drive Gp-Final -Lh
| 28***30 | Drive Group-Final; -Lh | 1 |
| 29***32 | Wheel & Tire Group | 6 |
349-6144 Filler Gp-Power Train Oil
| 30***21 | Wheel & Tire Group | 6 |
| 34***44 | Filler Group-Power Train Oil | 1 |
286-7322 Filler Gp-Power Train Oil
| 28***22 | Filler Group-Power Train Oil | 1 |
| 30***20 | Wheel & Tire Group | 6 |
287-1511 Filter Gp-Oil -Transmission
| 28***11 | Filter Group-Oil; -Transmission | 1 |
| 31***02 | Wheel & Tire Group | 6 |
249-2307 Filter Gp-Oil -Hydraulic Tank Return
| 24***07 | Filter Group-Oil; -Hydraulic Tank Return | 1 |
| 30***22 | Wheel & Tire Group | 6 |
253-7939 Filter Gp-Oil -Transmission
| 25***39 | Filter Group-Oil; -Transmission | 1 |
| 30***25 | Wheel & Tire Group | 6 |
333-6432 Filter Gp-Oil -Transmission
| 31***18 | Wheel & Tire Group | 6 |
| 33***32 | Filter Group-Oil; -Transmission | 1 |
250-8204 Gear Gp-Bevel & Pinion
| 25***04 | Gear Group-Bevel & Pinion | 1 |
| 32***02 | Wheel & Tire Group | 6 |
249-6548 Lines Gp-Lubrication -Pump Drive
| 24***48 | Lines Group-Lubrication; -Pump Drive | 1 |
| 32***26 | Wheel & Tire Group | 6 |
288-9615 Lines Gp-Transmission Oil
| 22***85 | Wheel Group | 1 |
| 28***15 | Lines Group-Transmission Oil | 1 |
| 2D***43 | Seal-O-Ring | 1 |
253-7931 Lines Gp-Transmission Oil
| 14***38 | Tire; (18-25) | 1 |
| 14***33 | Wheel Group | 1 |
| 25***31 | Lines Group-Transmission Oil | 1 |
250-8213 Mounting Gp-Wheel
| 14***36 | Tire; (23.5-R25) | 1 |
| 22***85 | Wheel Group | 1 |
| 22***86 | Flange As | 1 |
349-5188 Power Train Ar
| 10***11 | Tire; (18-R25) | 1 |
| 14***33 | Wheel Group | 1 |
| 2D***43 | Seal-O-Ring | 1 |
246-8065 Pump Gp-Gear
| 10***59 | Tire; (23.5-R25) | 1 |
| 22***85 | Wheel Group | 1 |
| 22***86 | Flange As | 1 |
246-8066 Pump Gp-Gear
| 14***92 | Tire; (23.5-25) | 1 |
| 22***85 | Wheel Group | 1 |
| 24***66 | Pump Group-Gear | 1 |
316-5385 Screen Gp-Magnetic
| 12***13 | Tire; (23.5-25) | 1 |
| 15***44 | Wheel Group | 1 |
| 31***85 | Screen Group-Magnetic | 1 |
246-8789 Screen Gp-Magnetic -Transmission
| 15***44 | Wheel Group | 1 |
| 24***89 | Screen Group-Magnetic; -Transmission | 1 |
| 30***23 | Tire; (23.5-25) | 1 |
250-8212 Shaft Gp-Drive
| 15***44 | Wheel Group | 1 |
| 25***12 | Shaft Group-Drive | 1 |
| 30***24 | Tire; (23.5-25) | 1 |
253-5307 Shaft Gp-Input
| 15***44 | Wheel Group | 1 |
| 25***07 | Shaft Group-Input | 1 |
| 30***09 | Tire; (23.5-25) | 1 |
285-0604 Tandem & Cover Gp
| 15***44 | Wheel Group | 1 |
| 28***04 | Tandem & Cover Group | 1 |
| 30***10 | Tire; (23.5-25) | 1 |
294-9319 Tire & Rim Ar
| 15***42 | Wheel Group | 1 |
| 29***19 | Tire & Rim Ar | 1 |
| 6C***68 | Tire; (23.5-R25) | 1 |
294-9318 Tire Gp
| 15***44 | Wheel Group | 1 |
| 19***67 | Tire; (23.5-R25) | 1 |
| 29***18 | Tire Group | 1 |
253-8407 Transmission Ar
| 15***44 | Wheel Group | 1 |
| 25***07 | Transmission Ar | 1 |
| 27***48 | Tire; (23.5-R25) | 1 |
250-2139 Valve & Mtg Gp-Solenoid -Differential Lock
| 15***44 | Wheel Group | 1 |
| 23***56 | Tire; (23.5-R25) | 1 |
| 25***39 | Valve & Mtg Group-Solenoid; -Differential Lock | 1 |
244-3114 Valve Gp-Modulating -Transmission Clutch
| 15***42 | Wheel Group | 6 |
| 24***14 | Valve Group-Modulating; -Transmission Hydraulic Control | 1 |
257-5026 Valve Gp-Relief -Transmission Control Valve
| 15***44 | Wheel Group | 6 |
| 25***26 | Valve Group-Relief; -Transmission Control Valve | 1 |
326-3704 Wheel & Tire Ar
| 19***18 | Turnbuckle | 4 |
| 32***04 | Wheel & Tire Ar | 1 |
| 34***51 | Cover As | 1 |
307-3708 Wheel & Tire Ar
| 16***19 | Plug As | 2 |
| 19***68 | Washer-Hard; (17.5x32x8-mm Thk) | 3 |
| 1P***34 | Cup-Bearing | 2 |
310-7336 Wheel & Tire Ar
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 64 |
| 26***66 | Bracket As | 1 |
| 26***69 | Bracket As | 2 |
307-3706 Wheel & Tire Ar
| 25***82 | Axle Group-Front | 1 |
| 28***07 | Mounting Group-Axle; -Front | 1 |
| 30***06 | Wheel & Tire Ar | 1 |
152-3988 Wheel & Tire Ar
| 15***88 | Wheel & Tire Ar | 1 |
| 1J***87 | Flange | 2 |
| 7D***69 | Ring-Lock | 1 |
307-3707 Wheel & Tire Ar
| 26***45 | Axle As-Front | 1 |
| 2D***52 | Bearing | 2 |
| 2G***07 | Bearing-Sleeve | 4 |
310-7322 Wheel & Tire Ar
| 13***33 | Spacer; (11x25x17-mm Thk) | 1 |
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 65 |
| 26***66 | Bracket As | 1 |
152-3965 Wheel & Tire Ar
| 15***65 | Wheel & Tire Ar | 1 |
| 28***81 | Wheel Group; -Brake, Front Tandem | 2 |
| 28***82 | Wheel Group; -Brake, Rear Tandem | 2 |
328-3328 Wheel & Tire Ar
| 08***41 | Plate | 1 |
| 13***00 | Clip; (Tab) | 2 |
| 19***78 | Washer-Hard; (13.5x30x12-mm Thk) | 8 |
152-4008 Wheel & Tire Ar
| 15***08 | Wheel & Tire Ar | 1 |
| 22***85 | Wheel Group | 1 |
| 2D***43 | Seal-O-Ring | 1 |
307-3705 Wheel & Tire Ar
| 10***69 | Bolt-Self-Locking; (M16x2x60-mm) | 4 |
| 11***49 | Ring-Retaining | 1 |
| 13***67 | Seal-O-Ring | 1 |
295-0033 Wheel & Tire Ar
| 10***69 | Bolt-Self-Locking; (M16x2x60-mm) | 4 |
| 11***49 | Ring-Retaining | 1 |
| 13***67 | Seal-O-Ring | 1 |
152-4000 Wheel & Tire Ar
| 14***33 | Wheel Group | 1 |
| 15***00 | Wheel & Tire Ar | 1 |
| 2D***43 | Seal-O-Ring | 1 |
307-3709 Wheel & Tire Ar
| 09***36 | Pin-Cotter | 1 |
| 1B***78 | Nut,Plain,Hexagon Rod To Lever Uoc:Bsv,Bsx | 2 |
| 28***87 | Handle As | 1 |
307-3710 Wheel & Tire Ar
| 26***20 | Cover As | 1 |
| 26***21 | Cover As | 1 |
| 26***26 | Cover | 1 |
167-0694 Wheel & Tire Ar
| 16***94 | Wheel & Tire Ar | 1 |
| 22***86 | Flange As | 1 |
| 22***02 | Rim As; (19.5x25) | 1 |
307-3724 Wheel & Tire Gp
| 1B***09 | Bolt-Carriage | 4 |
| 1K***72 | Locknut Horn To Guard | 4 |
| 30***24 | Wheel & Tire Group | 1 |
142-6417 Wheel & Tire Gp
| 08***41 | Plate | 1 |
| 13***00 | Clip; (Tab) | 2 |
| 14***17 | Wheel & Tire Group | 1 |
142-6434 Wheel & Tire Gp
| 14***34 | Wheel & Tire Group | 1 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 2 |
| 5S***85 | Lockwasher | 2 |
167-0693 Wheel & Tire Gp
| 16***93 | Wheel & Tire Group | 1 |
| 19***78 | Washer-Hard; (13.5x30x12-mm Thk) | 36 |
| 23***51 | Screw-Button Head; (M10x1.5x25-mm) | 30 |
307-3720 Wheel & Tire Gp
| 19***77 | Washer-Hard; (11x25x10-mm Thk) | 12 |
| 19***80 | Washer-Hard; (17.5x32x8-mm Thk) | 4 |
| 27***35 | Bearing | 2 |
307-3722 Wheel & Tire Gp
| 25***69 | Support As | 1 |
| 29***29 | Plate As | 1 |
| 29***31 | Guard As | 1 |
307-3721 Wheel & Tire Gp
| 28***69 | Frame As | 1 |
| 29***58 | Plate | 1 |
| 29***59 | Pin | 1 |
326-3702 Wheel & Tire Gp
| 00***83 | Nipple-Pipe; (Hexagon) | 2 |
| 06***51 | Clamp | 2 |
| 09***35 | Spacer; (11x25x20-mm Thk) | 2 |
295-0032 Wheel & Tire Gp
| 19***78 | Washer-Hard; (13.5x30x12-mm Thk) | 36 |
| 23***51 | Screw-Button Head; (M10x1.5x25-mm) | 12 |
| 27***29 | Plate | 6 |
142-6433 Wheel & Tire Gp
| 14***33 | Wheel & Tire Group | 1 |
| 19***78 | Washer-Hard; (13.5x30x12-mm Thk) | 8 |
| 30***24 | Bar | 1 |
328-3326 Wheel & Tire Gp
| 03***77 | Tee-Pipe | 1 |
| 09***35 | Spacer; (11x25x20-mm Thk) | 2 |
| 10***89 | Spacer | 2 |
307-3723 Wheel & Tire Gp
| 19***18 | Turnbuckle | 54 |
| 25***69 | Guard As-Screen; (Radiator, Top) | 1 |
| 30***23 | Wheel & Tire Group | 1 |
307-3725 Wheel & Tire Gp
| 1J***50 | Seal-Lip Type | 2 |
| 27***32 | Pin | 1 |
| 27***33 | Pin-Lower | 1 |
310-7302 Wheel & Tire Gp
| 26***79 | Hitch As | 1 |
| 31***02 | Wheel & Tire Group | 1 |
| 6V***45 | Bolt; (M20x2.5x70-mm) | 2 |
310-7318 Wheel & Tire Gp
| 00***83 | Nipple-Pipe; (Hexagon) | 2 |
| 06***51 | Clamp | 2 |
| 09***35 | Spacer; (11x25x20-mm Thk) | 2 |
196-4927 Wheel & Tire Gp
| 19***27 | Wheel & Tire Group | 1 |
| 19***78 | Washer-Hard; (13.5x30x12-mm Thk) | 36 |
| 23***51 | Screw-Button Head; (M10x1.5x25-mm) | 28 |
142-6438 Wheel & Tire Gp
| 14***38 | Wheel & Tire Group | 1 |
| 24***84 | Fastener Group-Sensor; -Sonic | 2 |
| 3B***07 | Washer,Lock; Tube To Torque Converter,Tube To Oil Cooler And Tube To Hose | 4 |
150-5143 Wheel Ar
| 03***77 | Tee-Pipe | 1 |
| 09***35 | Spacer; (11x25x20-mm Thk) | 2 |
| 10***67 | Fitting Group; (Union) | 1 |
285-0609 Wheel Ar
| 19***19 | Seal-Boot | 1 |
| 1D***06 | Nut-Slotted | 1 |
| 26***64 | Rod | 1 |
151-0288 Wheel Ar
| 00***39 | Adapter-Pipe | 1 |
| 15***88 | Wheel Ar | 1 |
| 28***40 | Hose As | 1 |
286-0681 Wheel Gp -Brake, Front Tandem
| 26***69 | Plate As | 1 |
| 27***11 | Plate As | 1 |
| 28***81 | Wheel Group; -Brake, Front Tandem | 1 |
142-6233 Wheel Gp
| 14***33 | Wheel Group | 1 |
| 25***96 | Wiring Group-Lubrication | 1 |
| 28***73 | Lines Group-Automatic Lubrication | 1 |
150-5144 Wheel Gp
| 15***44 | Wheel Group | 1 |
| 15***02 | Adapter As | 1 |
| 17***31 | Connector As | 1 |
286-0682 Wheel Gp -Brake, Rear Tandem
| 00***63 | Elbow, 90 Deg Street, 3/4in. N.P.T. | 1 |
| 03***77 | Tee-Pipe | 1 |
| 11***99 | Nipple-Pipe | 1 |
150-5142 Wheel Gp
| 10***67 | Fitting Group; (Union) | 1 |
| 15***42 | Wheel Group | 1 |
| 15***02 | Adapter As | 2 |
226-1885 Wheel Gp
| 11***31 | Bolt; (M24x3x120-mm) | 22 |
| 22***85 | Wheel Group | 1 |
| 26***07 | Washer-Hard; (26x47x12-mm Thk) | 22 |
Service Equipment And Supplies
249-7321 Film Gp -Variable Horsepower
| 24***21 | Film Group; -Variable Horsepower | 1 |
249-7328 Film Gp -Vhp Plus
| 24***28 | Film Group; -Vhp Plus | 1 |
261-8618 Film Gp
| 26***18 | Film Group | 1 |
267-3184 Film Gp-International
| 26***84 | Film Group-International | 1 |
267-3183 Film Gp-U.S.
| 26***83 | Film Group-U.S. | 1 |
8f-9866 Grease Gun Gp
| 8F***66 | Grease Gun As | 1 |
302-4232 Plate & Film Gp -Turkish, With Monitor Software
| 30***32 | Plate & Film Group; -Turkish, With Monitor Software | 1 |
302-4229 Plate & Film Gp -Italian, With Monitor Software
| 30***29 | Plate & Film Group; -Italian, With Monitor Software | 1 |
302-4225 Plate & Film Gp -Danish, With Monitor Software
| 30***25 | Plate & Film Group; -Danish, With Monitor Software | 1 |
302-4221 Plate & Film Gp -Spanish, With Monitor Software
| 30***21 | Plate & Film Group; -Spanish, With Monitor Software | 1 |
302-4237 Plate & Film Gp -Slovenian, With Monitor Software
| 30***37 | Plate & Film Group; -Slovenian, With Monitor Software | 1 |
302-4235 Plate & Film Gp -Chinese, With Monitor Software
| 30***35 | Plate & Film Group; -Chinese, With Monitor Software | 1 |
302-4236 Plate & Film Gp -Romanian, With Monitor Software
| 30***36 | Plate & Film Group; -Romanian, With Monitor Software | 1 |
302-4227 Plate & Film Gp -Swedish, With Monitor Software
| 30***27 | Plate & Film Group; -Swedish, With Monitor Software | 1 |
302-4231 Plate & Film Gp -Hebrew, With Monitor Software
| 30***31 | Plate & Film Group; -Hebrew, With Monitor Software | 1 |
302-5136 Plate & Film Gp -British, With Monitor Software
| 30***36 | Plate & Film Group; -British, With Monitor Software | 1 |
298-5632 Plate & Film Gp
| 29***32 | Plate & Film Group | 1 |
302-4220 Plate & Film Gp -Portugese, With Monitor Software
| 30***20 | Plate & Film Group; -Portugese, With Monitor Software | 1 |
302-4224 Plate & Film Gp -Dutch, With Monitor Software
| 30***24 | Plate & Film Group; -Dutch, With Monitor Software | 1 |
302-4223 Plate & Film Gp -German, With Monitor Software
| 30***23 | Plate & Film Group; -German, With Monitor Software | 1 |
302-4219 Plate & Film Gp -English, With Monitor Software
| 30***19 | Plate & Film Group; -English, With Monitor Software | 1 |
302-4226 Plate & Film Gp -Finnish, With Monitor Software
| 30***26 | Plate & Film Group; -Finnish, With Monitor Software | 1 |
302-4230 Plate & Film Gp -Greek, With Monitor Software
| 30***30 | Plate & Film Group; -Greek, With Monitor Software | 1 |
251-1219 Plate & Film Gp
| 25***19 | Plate & Film Group | 1 |
302-4228 Plate & Film Gp -Norwegian, With Monitor Software
| 30***28 | Plate & Film Group; -Norwegian, With Monitor Software | 1 |
302-4234 Plate & Film Gp -Arabic, With Monitor Software
| 30***34 | Plate & Film Group; -Arabic, With Monitor Software | 1 |
302-4233 Plate & Film Gp -Russian, With Monitor Software
| 30***33 | Plate & Film Group; -Russian, With Monitor Software | 1 |
302-4222 Plate & Film Gp -French, With Monitor Software
| 30***22 | Plate & Film Group; -French, With Monitor Software | 1 |
211-0617 Tool Gp-Hand
| 21***17 | Tool Group-Hand | 1 |
Work Tools
257-3466 Bit Gp-End
| 25***66 | Bit Group-End | 1 |
249-9170 Blade Gp
| 24***70 | Blade Group | 1 |
257-3467 Edge Gp-Bit & Cutting
| 25***67 | Edge Group-Bit & Cutting | 1 |
268-8699 Edge Gp-Bit & Cutting
| 26***99 | Edge Group-Bit & Cutting | 1 |
268-8698 Edge Gp-Bit & Cutting
| 26***98 | Edge Group-Bit & Cutting | 1 |
257-3463 Edge Gp-Cutting -Straight
| 25***63 | Edge Group-Cutting; -Straight | 1 |
257-3464 Edge Gp-Cutting -Straight
| 25***64 | Edge Group-Cutting; -Straight | 1 |
257-3462 Edge Gp-Cutting -Curved
| 25***62 | Edge Group-Cutting; -Curved | 1 |
349-8445 Edge-Cutting
| 34***45 | Edge-Cutting | 1 |
281-9455 Extension Gp-Blade -Lh
| 28***55 | Extension Group-Blade; -Lh | 1 |
281-9454 Extension Gp-Blade -Rh
| 28***54 | Extension Group-Blade; -Rh | 1 |
265-6710 Lift Gp-Blade
| 26***10 | Lift Group-Blade | 1 |
264-3062 Mounting Gp-Ripper
| 26***62 | Mounting Group-Ripper | 1 |
207-2801 Mounting Gp-Ripper
| 20***01 | Mounting Group-Ripper | 1 |
296-3529 Ripper Ar
| 29***29 | Ripper Ar | 1 |
264-3058 Ripper Ar
| 26***58 | Ripper Ar | 1 |
207-2428 Ripper Ar
| 20***28 | Ripper Ar | 1 |
293-4456 Ripper Gp
| 29***56 | Ripper Group | 1 |
8j-5274 Ripper Gp
| 8J***74 | Ripper Group | 1 |
8j-2189 Tooth Gp-Ripper
| 8J***89 | Tooth Group-Ripper; -Straight | 1 |
16M serial number reference
The PIN/serial plate on a 16M-family grader is riveted to the main frame, usually on the left or right side ahead of the cab near the front frame rail (sometimes near the moldboard lift cylinder support); if the plate is missing the number may be stamped directly into the frame in the same area. Read the first 3 characters as the serial prefix (model/production-block identifier) and the digits that follow as the sequential unit number for that prefix (e.g. R9H00233).
| Prefix | Identifies | Notes |
|---|---|---|
| B9H | 16M, first-generation production | Earliest serial prefix for the 16M motor grader, covered in the same factory operation and maintenance manual as R9H (B9H1-Up / R9H1-Up). Cat C13 ACERT engine, VHP Plus rated roughly 297-332 hp (221-248 kW) depending on gear/mode. 16M was introduced in 2006 as the replacement for the 16H. |
| R9H | 16M, main production run (units later marketed by resellers as "16M2") | Most commonly seen prefix on used 16M listings. Same base machine and C13 ACERT engine as B9H; no distinct second official model designation or separate prefix break for "16M2" turned up in factory literature, so treat that label as informal dealer usage within the R9H range unless a dealer PIN lookup shows otherwise - confirm with dealer. |
| N9Y | 16M3 | 16M3 introduced around September 2015 for small-to-medium mining work. Same 4.9 m (16 ft) moldboard width and C13 ACERT engine family as 16M, updated to Tier 4 Final emissions with a newer electronically controlled powershift transmission (auto shift/regen features), rated about 290-348 hp (216-260 kW). |
| E9Y | 16M3 | Also tied to the 16M3 in factory-style repair literature alongside N9Y, dating from the same 2015 introduction. Exact split between E9Y and N9Y (plant, build phase, or regional configuration) is not documented in available sources - confirm with dealer for the precise cutoff or difference. |
Frequently asked questions
What engine does the Caterpillar 16M motor grader use?
A Cat C13 ACERT diesel, rated 221 kW (297 hp) at 2000 rpm in the base VHP arrangement, up to 248 kW (332 hp) in the higher-output VHP Plus arrangement depending on gear and configuration. The same C13 ACERT carries through to the Tier 4 Final 16M3.
How much does a Caterpillar 16M motor grader weigh?
Operating weight runs roughly 26.06-35.67 t (57,452-78,643 lb) depending on counterweight, tires, and ripper/scarifier configuration. A typically equipped mining-spec 16M lands close to 30.5 t; check the configuration before quoting an exact figure.
What replaced the Caterpillar 16M motor grader?
The Tier 4 Final 16M3, introduced around 2015 with SCR aftertreatment, automatic parked regeneration, and an updated powershift transmission, replaced the base 16M. The 16M3 was later succeeded by the current plain "16" model, continuing the lineage that began with the 16H.
What 16M owners discuss
Is there a known transmission or driveline complaint on the 16M motor grader?
Early-build 16M graders (production start around 2009) had a documented driveline complaint: while light-blading downhill in second or third gear, the transmission could suddenly upshift as high as fifth gear with no operator input and no warning. The root cause traced back to torsional-coupler and flywheel mounting bolts that left the factory under-torqued, letting the clutch pack slip in a way the transmission control read as a shift event. Caterpillar's field correction, folded into production by roughly 2013, covers upgraded transmission clutch pistons and a redesigned torsional coupler, with flywheel replacement if scoring is found underneath. On a machine built in that early window, ask whether this driveline correction was ever performed and get it documented. Have your dealer verify the driveline campaign history against the machine's serial number before you rely on it.
What are the real-world quirks of the C13 ACERT engine used in the 16M family, and does it change across series?
The 16M and its Tier 4 Final successor (16M3) both run the Cat C13 ACERT, a 12.5 L inline six with Variable Horsepower (VHP/VHP Plus) electronic power management rather than one fixed rating. Net output is commonly quoted anywhere from roughly 290 to 350 hp (about 216 to 261 kW) depending on the VHP trim and emissions tier ordered, so a single horsepower figure should be treated as configuration-specific, not a fixed spec. All versions use an air-to-air aftercooled intake and an electronic ECM that actively protects itself: coolant temperature above 110°C (230°F) logs an event and pulls power back, and low oil pressure triggers a stepped warning that can cut output before a shutdown. After any ECM replacement, engine overhaul, or a cleared timing-related fault, the injection timing calibration has to be redone through dealer software or the engine runs out of calibration. The Tier 4 Final 16M3 adds a diesel particulate filter plus SCR/DEF aftertreatment; the earlier Tier 3 16M does not carry that hardware, so DEF handling, regen behavior, and cold-weather urea concerns only apply to the newer emissions configuration. Confirm which tier a used unit actually carries rather than assuming from the model year alone.
What wear pattern should owners expect on the circle, drawbar, and moldboard assembly?
These components are built with sacrificial wear parts ahead of the structural castings: nylon-composite inserts ride between the drawbar and circle and between the support shoes and circle, and brass wear strips sit between the moldboard and its mounting rail. Only the forward arc of the circle's gear teeth is hardened, since that's the section doing the work during normal grading passes. On a used machine, circle backlash, drawbar side-play, and remaining wear-strip thickness are the first wear items worth checking. If the sacrificial inserts and strips were run to nothing, the underlying circle or drawbar casting itself is likely worn, and that repair gets expensive quickly compared to routine insert replacement.
Is the frame articulation hitch a weak point on this grader?
The articulation joint runs on a single large tapered roller bearing carrying the full frame load, sealed against dirt and moisture. Field consensus is that its failure mode is contamination rather than fatigue: packed dirt or haul-road trash in the joint restricts free articulation and accelerates seal and bearing wear well before hour meter readings would suggest a problem. A mechanical lock pin is provided specifically to immobilize articulation during service or transport; skipping it while working near the hitch risks the frame swinging under its own weight. Because this is a structural, safety-relevant joint, have your dealer verify hitch bearing preload and seal condition as part of any pre-purchase inspection.
What electrical or sensor faults come up most often on the 16M, and are they usually real sensor failures?
A recurring complaint on Cat M-series graders, which share the same implement control module steering logic across models, is steering-related fault codes tied to the steering cylinder position sensors, logged even when the operator isn't touching the steering control. The usual root cause isn't the sensor itself: front wheel bearing play lets the wheels flutter side to side, and the position sensor faithfully reports that motion, which the control module then reads as an unexpected steering event. Chasing this as a wiring or sensor replacement issue first typically wastes time and money; checking front wheel bearing end play is the more productive first step before swapping electrical components.
The 16M uses joystick steering instead of a steering wheel. How do operators feel about it?
The M-series line, including the 16M, replaced the conventional steering wheel with electro-hydraulic joystick steering and gear selection as a deliberate design change across the whole series. Operator reaction has generally settled positive after an adjustment period: most experienced grader operators report the controls feel unfamiliar for the first few days, then become straightforward once they've run through the gears a number of times, with lower arm and hand fatigue over a full shift cited as the main benefit. The recurring caveat is that roading at higher travel speeds feels different from a wheel-steered machine, since joystick input doesn't behave like a steering wheel at speed; operators coming from older lever- or wheel-steered graders can take longer to get comfortable roading than they do grading.
What should a buyer check before purchasing a used 16M motor grader?
Start by confirming the exact configuration: whether it's a Tier 3 16M or a Tier 4 Final 16M3 with diesel particulate filter and SCR/DEF aftertreatment, since maintenance needs differ between them. Check driveline history for any pre-2013-build unit against the known torsional-coupler and clutch-piston correction. Inspect circle tooth wear and backlash, drawbar and moldboard wear-insert thickness, and the moldboard cutting edge and end bits. Check the articulation hitch for bearing play and seal condition, and cycle the wheel lean and other hydraulic cylinders for drift, since seal wear from contamination is a common failure path on these cylinders. Look closely at the cooling package core, including between the charge-air cooler and hydraulic oil cooler, since dust can pack the center of the stack and cause overheating even when the face looks clean. Note the implement configuration too: 16M-class mining graders are typically ordered with a rear ripper rather than a scarifier, so confirm the ripper tip class matches the work intended. Finally, pull the full ECM fault code history through dealer diagnostic software and compare it against the hour meter. Have your dealer verify all of the above, plus any open recall or driveline campaign status, before finalizing purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 16M part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.