Caterpillarmotor grader
Caterpillar 14H NA
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 14H NA is a large motor grader in Cat's 14-series, a heavier class above the mid-size 140H line, built for haul-road maintenance, mine-road upkeep, and heavy site grading. NA denotes the North America regional configuration, built under its own machine serial prefix; it runs the mechanically governed Cat 3306 DITA inline-six diesel, a turbocharged, direct-injection, air-to-air aftercooled engine rated roughly 215-240 hp (160-179 kW) depending on gear range, versus the electronically tuned 3176-family engine offered on other 14H regional builds. Standard operating weight runs about 18.8 tonnes (41,400 lb), rising to roughly 26.5 tonnes (58,500 lb) fully ballasted. The 14H generation was built roughly 1996 through 2007, following the 14G and preceding the 14M, with an articulated frame, tandem rear drive, direct-drive powershift planetary transmission, and a 4.3 m (14 ft) moldboard shared across regional configurations.
Across the 14-series, the biggest change was the move from mechanical engines like the 3306 DITA to electronically controlled and later common-rail power on the 14M and its successors, along with cab and control upgrades; within the 14H generation itself, the NA/ES/base regional builds mostly split on engine and emissions strategy rather than core grader architecture, so drivetrain, circle, and structural parts carry over broadly across the family for wear items. In the used and parts market, 14H NA units draw interest because the mechanical 3306 is comparatively simple to maintain and rebuild without dealer diagnostic tools, which suits remote quarry and mine-road fleets running graders well past 15,000 hours. The NA configuration was a lower-volume regional build, so confirm the machine serial prefix before ordering power train or engine parts, since base and NA 14H machines are not fully interchangeable on engine components.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 14H NA specifications
Engine
| Engine model | Cat 3306 DITA, 6-cylinder inline diesel, turbocharged and aftercooled. This is the engine used on the 14H NA production run (serial prefix 7WJ). Note: earlier 14H production (serial prefix ASE, pre-NA) used a different engine, the Cat 3176/3176C ATAAC rated 164-179 kW (220-240 hp) — do not confuse the two arrangements when sourcing engine parts. |
| Net power | 160 kW (215 hp) at 2000 rpm in the top travel-speed range (gears 7-8). Net power at lower gear ranges is not published for this engine arrangement. |
| Displacement | 10.45 L (637.7 cu in) |
| Cylinders | 6, inline |
| Emissions tier | Not published for this configuration in the spec sheets reviewed. Mechanically governed diesel, no electronic engine controls. |
Weights
| Standard operating weight | 18,786 kg (41,412 lb) |
| Maximum/ballasted operating weight | Not published specifically for the 3306-engine NA arrangement. The earlier 3176-engine 14H (prefix ASE) lists a maximum operating weight of about 26,540 kg (58,509 lb) — treat as an earlier-arrangement figure, not confirmed for 14H NA specifically. |
| Ground pressure | Not published in the sources reviewed. |
Dimensions
| Overall transport length | 9.21 m (30.22 ft) |
| Width over tires | 2.82 m (9.26 ft) |
| Transport height (to cab top) | 3.34 m (10.96 ft) |
| Wheelbase | 6.46 m (21.2 ft) |
| Moldboard (blade) width | 4.30 m (14.1 ft) |
| Moldboard height | 0.69 m (27.1 in) |
Performance
| Maximum travel speed, forward | 42.8 km/h (26.6 mph) |
| Maximum travel speed, reverse | 47.3 km/h (29.4 mph) |
| Transmission | Direct-drive powershift, planetary gearing, 8 forward / 8 reverse speeds |
| Hydraulic pump flow | Axial-piston pump, about 243 L/min (64.2 US gpm), relief valve set near 24.1 MPa (3500 psi) |
| Gradeability | Not published in the sources reviewed. |
Service capacities (summary)
| Fuel tank | 379 L (100.2 gal) |
| Hydraulic system | 125 L (33.1 gal) |
| Engine oil | Not published for this configuration in the sources reviewed — verify against the dealer service chart for the 3306 DITA engine. |
| Cooling system | Not published for this configuration in the sources reviewed. |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
14H NA fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase, with filter (Cat 3306 DITA turbocharged-aftercooled diesel) | 27 L (7.0 US gal). A separate 7WJ-prefix reference lists roughly 29 L (7.7 US gal) instead — varies by configuration/series, confirm against the dipstick and nameplate. | Cat DEO diesel engine oil. SAE 15W-40 covers roughly -10 to 50 C (14 to 122 F); SAE 10W-30 for -20 to 40 C (-4 to 104 F); Cat DEO Cold Weather SAE 0W-40 for cold starts to -40 C (-40 F). Pick viscosity by the coldest ambient the machine sees at start-up. |
| Cooling system | 42 L (11.1 US gal) | Cat coolant/antifreeze — Cat ELC extended-life coolant or Cat DEAC conventional coolant — mixed to the ratio rated for the coldest local ambient. Do not mix coolant types or brands in the same system. |
| Fuel tank | 379 L (100 US gal) | No. 2-D diesel fuel for normal ambient service. Switch to No. 1-D or a winter-blended fuel below about -7 C (20 F) to prevent fuel waxing and filter plugging. |
| Transmission, differential and final drive (combined power-shift compartment) | 83 L (21.9 US gal) | Cat TDTO transmission/drive-train oil. SAE 30 is the factory-fill grade for 0 to 35 C (32 to 95 F); SAE 10W for -20 to 10 C (-4 to 50 F); SAE 50 above 35 C (95 F); Cat TDTO Cold Weather SAE 0W-20 for starts down to -40 C (-40 F); Cat TDTO-TMS multigrade spans about -15 to 43 C (-5 to 110 F). |
| Tandem drive case, each side | 98 L (25.9 US gal) per side | Cat TDTO, same grade selection as the transmission/differential compartment, chosen by ambient temperature. |
| Circle drive gearbox | 6 L (1.6 US gal) | Cat GO gear oil, GL-5 performance level. SAE 80W-90 is the factory-fill grade; SAE 85W-140 for sustained heat; SAE 75W-90 for cold-weather starts. |
| Hydraulic system, total (implement, steering and brake circuits combined) | 125 L (33.0 US gal) total system | Cat HYDO hydraulic oil. SAE 10W for -20 to 40 C (-4 to 104 F); SAE 20W for -5 to 45 C (23 to 113 F); SAE 30 for 0 to 50 C (32 to 122 F). Cat TDTO or Cat DEO SAE 10W-30 are listed as acceptable alternates in this compartment. |
| Hydraulic tank (reservoir portion of the system above) | 63 L (16.6 US gal) | Same Cat HYDO oil and climate-based viscosity selection as the hydraulic system, above. |
| Front wheel spindle bearing housing, each side | 0.9 L (0.24 US gal) per side | Cat TDTO, matched to the same viscosity-by-climate selection used elsewhere in the power train. |
| Grease — chassis, articulation joint, drawbar and circle wear points | Not a sump fill. Lubricate at the individual grease points listed on the OMM lubrication chart. | Cat Extreme Application grease, NLGI 2, is the standard multipurpose grease for pin and bushing points. Use a semi-synthetic NLGI 1 arctic-grade Cat grease in sustained cold below about -30 C (-22 F), and a desert-grade Cat grease in sustained heat above 40 C (104 F). |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 14H NA maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 10 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
| Every 6,000 h |
|
Servicing the 14H NA beyond the schedule
Predictive Maintenance & Fluid Analysis
The 14H NA's 3306 DITA runs a mechanical fuel system with no ECM, so oil analysis is the main early-warning tool for injection pump, turbocharger, and liner wear. Pull engine oil samples every 250 hours and tandem, circle drive, and hydraulic samples every 500 hours; watch for silica from haul-road dust ingestion and metal fines from worn circle wear shoes. Track coolant additive concentration closely, since a dropped inhibitor level pits 3306 cylinder liners fast on machines run hard in quarry and mine-road service.
Corrective & Common Repairs
Typical 14H NA repairs center on the circle and drawbar: worn wear shoes and ball-socket bushings cause blade chatter and steering slop, and are common rebuild items given the machine's haul-road duty cycle. Tandem case seals and final drive bearings wear from constant articulation and heavy ballast loads. On the mechanical 3306 DITA, expect injection pump and turbocharger seal leaks, plus fuel system fouling from lower-quality fuel common on remote sites; keep spare wear shoes and seal kits on hand for field repairs.
Overhaul & Rebuild Points
Major rebuild points on the 14H NA typically show up in the 8,000-12,000 hour range: powershift clutch packs and tandem planetary gearing wear from constant direction changes during grading passes, and the circle drive gear segment and wear shoes need replacement once blade control gets sloppy. Inspect the main frame and drawbar ball socket for fatigue cracking, a known stress point on this haul-road-class grader. Engine-out overhauls on the 3306 DITA typically address liner wear, injection pump recalibration, and turbocharger bearing play.
Seasonal & Environment Servicing
Quarry and haul-road duty put the 14H NA's air intake and circle and drawbar grease points under constant abrasive dust; shorten air filter and grease intervals in these conditions instead of following the base schedule. In cold climates, verify coolant freeze protection and starting-aid function on the mechanical 3306 DITA before winter, since it has no electronic cold-start strategy to fall back on. Check hydraulic oil viscosity grade for the season and purge old grease from tandem and articulation points during spring service.
14H NA common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 1D-4540 | Bolt,Machine Fuel Filter Mounting | Fuel system service | Check fitment → |
| 1R-0750 | Filter As-Fuel | Fuel system service | Check fitment → |
| 6I-0273 | Filter Element As-Air | Air intake service | Check fitment → |
| 6I-0274 | Filter Element As-Air | Air intake service | Check fitment → |
| 231-4486 | Filter Element As-Cab Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
14H NA fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| None (3306 DITA has no engine ECM) | The 14H NA's Cat 3306 DITA is a mechanically governed, hydro-mechanical fuel-system engine with no engine control module, so the engine side cannot generate CID/FMI or SPN diagnostic codes at all. | Not applicable — absence of engine electronics is by design for this power train, not a fault condition. | Diagnose engine complaints (low power, hard start, excess smoke, rough run) with mechanical checks: fuel system pressure and timing, injector condition, turbocharger boost and aftercooler condition, valve lash, and compression, rather than an electronic code reader. |
| 585-2 | Transmission output speed sensor #1 signal abnormal, erratic, or intermittent. | Damaged or worn sensor tip-to-tone-wheel air gap, a chipped tone-ring tooth, or a corroded/loose sensor connector on the powershift transmission speed circuit. | Check sensor air gap and connector condition first, then test wiring continuity back to the transmission control module before replacing the sensor. |
| 673-2 | Transmission output speed sensor #2 signal abnormal, erratic, or intermittent. | Same failure modes as the #1 output speed sensor — sensor gap, damaged tone wheel, or harness/connector corrosion. | Inspect and reseat the connector, verify sensor gap, and check the wiring harness for chafe or moisture intrusion before condemning the sensor. |
| 641-5 | Transmission clutch solenoid (clutch 1 circuit) current below normal or open circuit. | Open solenoid coil winding, a broken or corroded harness connection, or a failed driver circuit in the transmission control module. | Measure solenoid coil resistance at the connector, check harness continuity to the control module, and replace the solenoid if it reads open. |
| 644-5 | Transmission clutch solenoid (clutch 4 circuit) current below normal or open circuit. | Same as the clutch 1 solenoid circuit — open coil, broken wiring, or corroded connector pins. | Verify solenoid resistance and harness continuity; when several clutch-solenoid codes set together, inspect the valve body wiring harness as a whole before replacing individual solenoids. |
| 110-3 | Engine coolant temperature sensor circuit voltage above normal, consistent with a short to battery voltage. | Sensor signal wire chafed and shorted against a power circuit, or a failed sensor. | Inspect the sensor wiring for chafe points and shorts to power, then test sensor resistance against spec before replacing it. |
| 177-3 | Torque converter oil temperature sensor circuit voltage above normal, consistent with a short to battery voltage. | Signal wire shorted to a power source in the harness, or a failed temperature sensor/sender. | Trace the sensor circuit for a short to power, check the connector for corrosion, and test or replace the sensor as needed. |
| 96-4 | Fuel level sensor circuit voltage below normal or shorted low. | Corroded or wet connector, a grounded signal wire, or a failed float-type sending unit in the tank. | Check the sender connector and wiring for a ground fault, then test the sending unit's resistance through its float range before replacement. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
14H NA attachments & work tools
Moldboard / cutting edge
A 4.3 m (14 ft) moldboard is the size that defines this grader class, with roughly 69 cm (27 in) of cutting-edge height and about 43-44 cm (17 in) maximum cut depth; exact figures vary slightly by configuration/series. A shimless moldboard retention system with top-adjust wear strips and inserts keeps the moldboard aligned on the circle and reduces blade chatter.
Front blade (straight / angle dozer blade)
A straight front blade or a manual/hydraulic-angle front blade mounts on the machine's front lift group for snow removal, land-leveling, or light dozing. The angle version adds roughly 30 degrees of hydraulic left/right angle beyond the straight blade.
Front scarifier
A front scarifier bolts to the same front lift group used by the front blade. It is a light-duty tool for breaking up compacted material, asphalt, and rocky subgrade ahead of the moldboard.
Rear ripper / scarifier
The rear-mounted multi-shank parallelogram ripper for this size class is commonly built around seven shank pockets on a single hydraulic lift cylinder, sharing mounting geometry across this size-class's generations. It needs a dedicated auxiliary hydraulic valve and circuit -- the valve, hoses, and plumbing are not part of the base machine and must be added to run the tool.
Push block / counterweight
The push block bolts to the nose plate/drawbar area at the front of the machine. It counterbalances a rear-mounted ripper and also serves as a pushing point when the grader is used to push-load or move other equipment.
Snow wing
An auxiliary wing moldboard, offered in mast and mastless mounting styles for this size class, extends plowing width for heavy snow and drift work; mastless designs are built to bench drifted snow to about 1 m (40 in) and give better side visibility. The wing runs on its own hydraulic lift/swing circuit, separate from the main moldboard hydraulics, with a normal winging speed of roughly 16-32 km/h (10-20 mph).
Front lift group (mounting/coupling)
Front-mounted tools such as the blade and scarifier share a common front lift-group mount rather than a quick-attach coupler, so swapping tools is a bolt-up job. The moldboard itself hangs on the drawbar-circle assembly with hydraulic circle drive, separate from the front lift group.
Cab and guarding configuration
Both ROPS-cab and non-ROPS closed-cab configurations have been offered for this size class, with published base weights normally quoted for the ROPS-cab configuration. Underbody guarding for driveline components is standard equipment, with heavier screens or guards available for quarry/aggregate duty -- confirm exact factory options for this serial range with a dealer.
Blade control modes
Console-selectable Fine, Normal, and Coarse blade-lift modes let the operator match hydraulic lift response to the task, whether fine grading, ripping, or wing/snow work.
All 14H NA assemblies by section
Every catalogued assembly group for the Caterpillar 14H NA. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
7c-9309 Cartridge Gp-Turbocharger
| 4P***09 | Bearing-Thrust | 1 |
| 4W***54 | Ring-Piston; (Seal-Piston Ring)(Seal-Piston) | 1 |
| 5P***57 | Seal-O-Ring; (64.77mm Id) | 1 |
111-8035 Turbocharger Gp
| 10***07 | Turbocharger Group | 1 |
| 11***35 | Turbocharger Group | 1 |
| 1P***51 | Gasket; (Turbocharger) | 1 |
7c-8657 Turbocharger Gp
| 1P***51 | Gasket; (Turbocharger) | 1 |
| 2N***66 | Locknut; (3/8-16-Thd)(High Temperature) | 4 |
| 7C***32 | Turbocharger Group | 1 |
106-7407 Turbocharger Gp
| 10***07 | Turbocharger Group | 1 |
| 11***17 | Cover (Compressor) | 1 |
| 11***18 | Housing (Turbine) | 1 |
7c-8632 Turbocharger Gp
| 7C***32 | Turbocharger Group | 1 |
| 7C***02 | Housing (Compressor) | 1 |
| 7C***04 | Housing (Turbine) | 1 |
147-3088 Aftercooler Gp
| 03***19 | Bolt; --To Bearing Ret. At Lower Front Shaft Bore | 4 |
| 03***57 | Bolt; --To Reverse Shaft Bearing Retainer & Forward Shaft Bearing Retainer | 4 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 3 |
111-7999 Aftercooler Gp-Air
| 03***19 | Bolt; --To Bearing Ret. At Lower Front Shaft Bore | 4 |
| 03***57 | Bolt; --To Reverse Shaft Bearing Retainer & Forward Shaft Bearing Retainer | 4 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 3 |
7e-5677 Air Cleaner Gp
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 10***56 | Air Cleaner Group | 1 |
| 10***57 | Tube As | 1 |
106-7656 Air Cleaner Gp
| 10***50 | Film; (Air Cleaner) (Radial Seal) (On Air Cleaner Cover) | 1 |
| 10***56 | Air Cleaner Group | 1 |
| 4P***24 | Seal-O-Ring | 1 |
163-1850 Air Cleaner Gp
| 16***50 | Air Cleaner Group | 1 |
| 4P***24 | Seal-O-Ring | 1 |
| 6I***73 | Filter Element As-Air; (Primary) | 1 |
7c-2092 Dust Ejector Gp
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 1 |
| 1B***55 | Nut,Plain,Hexagon Turbocharger Mounting | 1 |
| 4P***78 | Clamp | 1 |
7e-5682 Fastener Gp-Exhaust Manifold
| 10***93 | Stud-Taperlock; (3/8-16x2.36-In)(3/8-16x60 Thd) | 1 |
| 1M***43 | Spacer; (10.5x25.4x18.21-mm Thk) | 1 |
| 2N***66 | Locknut; (3/8-16-Thd)(High Temperature) | 12 |
7c-2094 Lines Gp-Air
| 10***58 | Hose | 1 |
| 14***67 | Clamp; (Hose) | 1 |
| 5P***99 | Clamp; (Hose) | 1 |
110-0020 Lines Gp-Air
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 1 |
| 10***92 | Tube-Air | 1 |
106-7308 Lines Gp-Air
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 1 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 1 |
| 10***92 | Tube-Air | 1 |
6n-0164 Manifold Gp-Exhaust
| 6N***64 | Manifold Group-Exhaust | 1 |
| 7N***86 | Manifold-Exhaust | 1 |
| 9Y***79 | Gasket Manifold Mtg Part Of Kit P/N 5r***26 | 3 |
134-4208 Manifold Gp-Exhaust
| 13***00 | Manifold-Exhaust | 1 |
| 13***08 | Manifold Group-Exhaust | 1 |
| 8S***16 | Manifold-Exhaust; (Front) | 1 |
113-8511 Muffler & Mounting Gp
| 11***11 | Muffler & Mounting Group | 1 |
| 1B***55 | Nut,Plain,Hexagon Turbocharger Mounting | 2 |
| 26***57 | Muffler | 1 |
Basic Engine
2w-7458 Crankshaft As
| 1W***05 | Gear-Crankshaft; (40-Teeth) | 1 |
| 2P***59 | Sleeve Crankshaft Assembly | 1 |
| 2W***58 | Crankshaft As | 1 |
7n-5642 Air Compressor Gp
| 0S***89 | Bolt, Hex. Hd., 5/8"-11 N.C. X 1 3/4" | 2 |
| 2B***95 | Cap Screw--Tube Assembly To Air Inlet Pipe | 2 |
| 2P***20 | Gasket-- Front Cover | 1 |
144-0744 Air Compressor Gp
| 03***60 | Bolt-Self Locking; (5/16-18x1.0) | 4 |
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 1 |
| 0S***15 | Bolt 19 mm (.75 In.) Long Return Air Console To Enclosed Rops | 2 |
4p-2975 Air Compressor Gp
| 03***60 | Bolt-Self Locking; (5/16-18x1.0) | 4 |
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 1 |
| 0S***15 | Bolt 19 mm (.75 In.) Long Return Air Console To Enclosed Rops | 2 |
109-1317 Air Compressor Gp
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 5 |
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 14 |
| 0T***65 | Bolt--3/8" X 3 1/2"--Use As Required; Bolt 5t***56 Plate To Cover Gp 4n***72 | 1 |
1p-9573 Bolt Gp-Engine Mounting
| 1P***73 | Bolt Group-Engine Mounting | 1 |
| 4B***07 | Washer,Flat Plug | 10 |
| 4D***04 | Washer,Flat Cover Mtg,Accessory Drive | 4 |
1n-4406 Camshaft Gp
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 1N***06 | Camshaft Group-Single; Camshaft Group--Single | 1 |
| 7E***80 | Camshaft | 1 |
8n-3163 Cover Gp-Cylinder Block
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 2A***98 | Pin,Straight,Headle Flywheel Housing | 2 |
| 4B***38 | Plug 28.95 mm(1.14 In.) Hole Dia. | 1 |
2p-6530 Cover Gp-Cylinder Head
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 1P***67 | Cover,Access Cylinder Head | 1 |
| 2P***30 | Cover Group-Cylinder Head; Cylinder Head Cover Group | 1 |
2p-6529 Cover Gp-Front Housing
| 0S***89 | Bolt, Hex. Hd., 5/8"-11 N.C. X 1 3/4" | 2 |
| 2P***29 | Cover Group-Front Housing; Front Housing Cover Group | 1 |
| 3S***13 | Nut-Full-Straps & Brackets | 6 |
111-8033 Cover Gp-Sound Suppression
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 3 |
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 2 |
130-2223 Cover Gp-Sound Suppression
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 3 |
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 2 |
8n-4745 Cover Gp-Valve Mechanism
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 15 |
| 13***47 | Seal-Integral; (Valve Cover) | 1 |
| 2W***86 | Cover As-Cylinder Head | 1 |
4p-9856 Crankshaft Gp
| 10***52 | Plate-Thrust | 2 |
| 19***34 | Kit-Basic Engine Repair; (Main Bearing)(Crankshaft) | 0 |
| 23***33 | Bearing-Main; (Standard)(Standard) | 7 |
6n-8079 Crankshaft Gp
| 10***52 | Plate-Thrust | 2 |
| 23***33 | Bearing-Main; (Standard)(Standard) | 7 |
| 2W***58 | Crankshaft As | 1 |
7n-6550 Cylinder Block Gp
| 10***12 | Insert; (Liner Seat) (.822-mm Thk) | 0 |
| 10***18 | Insert; (Liner Seat) (1.605-mm Thk) | 0 |
| 10***27 | Insert-Liner Seat (2.710mm Thk) | 0 |
1n-3576 Cylinder Block Gp
| 1N***76 | Cylinder Block Group | 1 |
| 1S***40 | Dowel; (30.23 mm X 9.37 mm) | 1 |
| 2S***58 | Washer-Hard; (17x29x3-mm Thk)(Engine Brake) | 14 |
8n-5286 Cylinder Block Gp
| 11***50 | Gasket-Plate | 1 |
| 1S***40 | Dowel; (30.23 mm X 9.37 mm) | 1 |
| 3S***96 | Seal-O-Ring; (9.53mm Id) | 1 |
7n-8876 Cylinder Head Gp
| 10***60 | Valve (Intake) | 6 |
| 10***65 | Insert-Valve Seat; (Exhaust)(Standard) | 6 |
| 10***68 | Insert-Valve Seat; (Inlet)(Standard) | 6 |
8n-6796 Cylinder Head Gp
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 10***65 | Insert-Valve Seat; (Exhaust)(Standard) | 6 |
| 10***68 | Insert-Valve Seat; (Inlet)(Standard) | 6 |
7w-0362 Cylinder Head Gp
| 10***60 | Valve (Intake) | 6 |
| 14***55 | Valve-Exhaust | 6 |
| 1W***00 | Rotocoil Assem, Each Including:- | 12 |
7e-9950 Damper Gp
| 34***30 | Damper As-Crankshaft | 1 |
| 4P***69 | Hub-Crankshaft | 1 |
| 5S***48 | Washer-Special | 1 |
101-5112 Drive Gp-Fan
| 03***35 | Bolt-Self Locking; 2.22cm(.875 In.) Lg | 4 |
| 10***11 | Drive Group-Fan | 1 |
| 10***12 | Drive Group-Fan | 1 |
107-9543 Drive Gp-Fan
| 03***35 | Bolt-Self Locking; 2.22cm(.875 In.) Lg | 4 |
| 10***43 | Drive Group-Fan | 1 |
| 12***14 | Drive Group-Fan | 1 |
123-9014 Drive Gp-Fan
| 12***14 | Drive Group-Fan | 1 |
| 19***80 | Adapter-Fan | 1 |
| 2P***57 | Hub-Fan To Bracket Assembly | 1 |
101-5111 Drive Gp-Fan
| 10***11 | Drive Group-Fan | 1 |
| 19***80 | Adapter-Fan | 1 |
| 2P***57 | Hub-Fan To Bracket Assembly | 1 |
7n-9536 Fastener Gp-Cylinder Head
| 1B***09 | Bolt-- Head To Cylinder Block | 5 |
| 1D***95 | Bolt (5/8-11x6in); (5/8-11x6-In) | 20 |
| 2S***36 | Washer,Flat Cover Assembly Mounting And Flywheel Housing Cover | 25 |
8n-0872 Fastener Gp-Front Housing
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 20 |
| 1C***51 | Bolt--Installation Of 2v***26 Retainer | 2 |
| 3E***14 | Bolt; (3/8-16x0.87-In) | 6 |
170-2496 Fastener Gp-Oil Pan
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 3 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 18 |
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 5 |
2p-6200 Fastener Gp-Oil Pan
| 03***35 | Bolt-Self Locking; 2.22cm(.875 In.) Lg | 18 |
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 3 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 16 |
7n-1755 Flywheel Gp
| 0S***76 | Bolt 5.08 cm(2 In.) Long | 9 |
| 7N***55 | Flywheel Group; Flywheel Group | 1 |
| 7N***46 | Gear (90 Teeth); (156 Teeth) | 1 |
4p-9858 Gear Gp-Front
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 2 |
| 0S***48 | Bolt,Machine Camshaft Gear Mounting | 4 |
1w-5634 Gear Gp-Front -Timing
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 2 |
| 0S***48 | Bolt,Machine Camshaft Gear Mounting | 4 |
8n-2395 Housing Gp-Flywheel
| 14***14 | Housing-Flywheel | 1 |
| 1A***60 | Capscrew, Hex Head (1/2 - 13 X 2 G5); (Hex Head) (1/2-13x2 Gd 8 Z) | 13 |
| 2A***62 | Gasket; (Rear Gear Housing Drain Plug) | 2 |
8n-0303 Housing Gp-Front
| 1W***00 | Gasket Timing Gear Cover | 1 |
| 1W***16 | Plate As-Front | 1 |
| 5M***14 | Pipe Plug Cylinder Block Oil Pressure | 1 |
7n-9122 Lifting Gp-Engine
| 4W***52 | Plate-Eye | 1 |
| 6V***99 | Bolt; (5/8-11x38.1mm) | 4 |
| 7N***22 | Lifting Group; Engine Lifting Group | 1 |
135-5094 Lines Gp-Air Compressor
| 03***72 | Elbow; (Flared 90 Degree) | 1 |
| 13***94 | Lines Group-Air Compressor | 1 |
| 13***66 | Adapter | 1 |
120-6609 Lines Gp-Air Compressor
| 00***04 | Fitting-Flared | 1 |
| 00***25 | Elbow-Flared | 1 |
| 12***09 | Lines Group-Air Compressor | 1 |
2p-9647 Pan Gp-Oil -Engine
| 11***35 | Plug-Drain; (Engine Oil Pan) | 1 |
| 11***36 | Adapter As-Drain | 1 |
| 16***99 | Gasket-Oil Pan | 1 |
9y-8219 Piston & Rod Gp
| 1P***56 | Bolt,Shoulder Connecting Rod | 2 |
| 1S***43 | Ring,Retaining Piston Pin | 2 |
| 32***72 | Bearing-Connecting Rod; (Standard) | 1 |
2w-1177 Piston & Rod Gp
| 1P***56 | Bolt,Shoulder Connecting Rod | 2 |
| 1S***43 | Ring,Retaining Piston Pin | 2 |
| 2W***77 | Piston & Rod Group; Connecting Rod And Piston Group | 1 |
168-4530 Piston & Rod Gp
| 16***30 | Piston & Rod Group | 1 |
| 16***31 | Body As-Piston | 1 |
| 1P***56 | Bolt,Shoulder Connecting Rod | 2 |
9y-8218 Piston Gp
| 15***62 | Body As-Piston | 1 |
| 2W***07 | Ring - Piston (Top) | 1 |
| 2W***08 | Ring-Piston; (Intermediate) | 1 |
2w-1711 Piston Gp
| 12***38 | Body As-Piston | 1 |
| 2W***07 | Ring - Piston (Top) | 1 |
| 2W***08 | Ring-Piston; (Intermediate) | 1 |
2p-6224 Seal Gp-Crankshaft
| 2P***24 | Seal Group-Crankshaft; Crankshaft Seal Group | 1 |
| 4W***52 | Seal Group-Crankshaft; (Counter Clockwise Rotation) | 1 |
| 9Y***95 | Seal Group-Crankshaft; (Clockwise Rotation) | 1 |
8n-5585 Support Gp-Engine
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 6 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 6 |
| 8N***85 | Support Group-Engine | 1 |
100-2863 Suppression Gp-Sound
| 00***26 | Bolt | 1 |
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 2 |
| 10***63 | Suppression Group-Sound | 1 |
100-2861 Suppression Gp-Sound
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 3 |
| 10***61 | Suppression Group-Sound | 1 |
| 12***67 | Clip | 5 |
7n-9589 Trunnion Gp-Engine
| 0L***29 | Bolt- 7.63 cm(3 In.) Long - Location "H" | 3 |
| 1W***19 | Trunnion Assembly Engine | 1 |
| 2P***87 | Ring | 1 |
7c-7013 Valve Mechanism Gp
| 1B***09 | Bolt-- Head To Cylinder Block | 1 |
| 1L***72 | Dowel (Part Of 8s***99 Assem.) | 1 |
| 2S***36 | Washer,Flat Cover Assembly Mounting And Flywheel Housing Cover | 1 |
7n-8026 Valve Mechanism Gp
| 5S***18 | Push Rod,Engine Pop Valve Lifter | 12 |
| 7C***13 | Valve Mechanism Group | 1 |
| 7N***26 | Valve Mechanism Group; Valve Mechanism Group | 1 |
Braking System
115-8147 Air Dryer Gp
| 11***47 | Air Dryer Group | 1 |
| 11***27 | Panel As; (Lh) | 1 |
| 16***45 | Bracket | 2 |
8d-2180 Brake Gp-Service
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 16 |
| 14***11 | Spindle-Wheel | 4 |
| 1P***93 | Cup-Roller Bearing | 8 |
8x-5275 Control Gp-Parking Brake
| 0S***25 | Bolt, Hex. Hd., 5/8"-11 N.C. X 2 1/2" | 2 |
| 11***21 | Plate As | 1 |
| 11***22 | Plate | 1 |
8x-4010 Control Gp-Service Brake
| 11***26 | Plate As | 1 |
| 11***29 | Bracket As | 1 |
| 12***44 | Plate As | 1 |
8x-4168 Tank Gp-Air
| 00***53 | Elbow-Pipe; (1/2-14 Nptf Thd) | 2 |
| 00***33 | Tee-Pipe | 1 |
| 1P***15 | Grommet Assem. | 4 |
5d-0470 Valve Gp-Quick-Release
| 11***37 | Valve-Quick-Release | 1 |
| 5D***70 | Valve Group-Quick Release; -Parking Brake-Air | 1 |
188-9250 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
| 18***50 | Valve Group-Solenoid | 1 |
7t-9074 Valve Gp-Solenoid
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
| 7N***37 | Housing-To Air Start Solenoid Valve | 1 |
185-0008 Valve Gp-Solenoid
| 15***70 | Nut; (1/2-20-2b-Thd) | 1 |
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
| 18***08 | Valve Group-Solenoid; -Air Horn | 1 |
Cooling System
2w-2660 Cooler Gp-Fltr Base & Eng Oil
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 3 |
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 2 |
2w-5636 Cooler Gp-Fltr Base & Eng Oil
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 1 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 1R***39 | Filter As-Engine Oil; (Standard Efficiency) | 1 |
125-5886 Cooler Gp-Fltr Base & Eng Oil
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 2 |
| 12***86 | Cooler Group-Filter Base & Eng Oil | 1 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 8 |
147-0366 Cooler Gp-Fltr Base & Eng Oil
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 2 |
| 14***66 | Cooler Group-Filter Base & Eng Oil | 1 |
| 14***67 | Cooler Group-Filter Base & Eng Oil | 1 |
147-0367 Cooler Gp-Fltr Base & Eng Oil
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 2 |
| 14***67 | Cooler Group-Filter Base & Eng Oil | 1 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 8 |
125-5887 Cooler Gp-Fltr Base & Eng Oil
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 2 |
| 12***86 | Cooler Group-Filter Base & Eng Oil | 1 |
| 12***87 | Cooler Group-Filter Base & Eng Oil | 1 |
140-9810 Cover Gp-Fan
| 12***06 | Stud | 12 |
| 14***10 | Cover Group-Fan | 1 |
| 14***57 | Cover-Fan | 1 |
6g-1990 Extension Gp-Drain
| 00***14 | Coupling-Pipe | 1 |
| 1P***97 | Valve-Drain; (Radiator) | 1 |
| 4L***54 | Capscrew; (3/8-16x21 In) (Gd8) (Hex Hd) (4-Roller) | 1 |
7c-2095 Fan Gp-Blower -Radiator
| 10***07 | Spider As-Fan; (6-Blade) | 1 |
| 7C***95 | Fan Group-Blower; -Radiator | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 6 |
8n-0888 Regulator Gp-Temperature
| 11***10 | Regulator-Water Temperature; (91 Deg Celsius) | 1 |
| 1W***10 | Pipe-Outlet | 1 |
| 5S***82 | Capscrew; (Hex Hd) (1/2-13x1 3/8, Gd8, Z) | 4 |
115-3465 Lines Gp-Power Train Cooler
| 11***64 | Hose As | 2 |
| 11***65 | Lines Group-Power Train Cooler | 1 |
| 13***69 | Film-Identification | 1 |
2w-7060 Lines Gp-Water
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 1 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 2 |
| 0T***65 | Bolt--3/8" X 3 1/2"--Use As Required; Bolt 5t***56 Plate To Cover Gp 4n***72 | 1 |
4w-6157 Lines Gp-Water
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 1 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 1 |
| 0T***65 | Bolt--3/8" X 3 1/2"--Use As Required; Bolt 5t***56 Plate To Cover Gp 4n***72 | 2 |
8x-5530 Lines Gp-Water
| 11***37 | Hose | 1 |
| 2A***40 | Tube | 1 |
| 3P***47 | Clamp | 1 |
105-9744 Lines Gp-Water
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 10***44 | Lines Group-Water | 1 |
| 1A***79 | Capscrew (5/16 - 18 Nc X 1 1/2 Gd5, Hex) | 8 |
8n-4408 Lines Gp-Water
| 7N***56 | Elbow-Bypass | 1 |
| 7X***31 | Plug-Pipe; (Flywheel Housing Drain) | 2 |
| 8N***08 | Lines Group-Water | 1 |
147-3089 Lines Gp-Water
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 14***89 | Lines Group-Water | 1 |
| 1A***79 | Capscrew (5/16 - 18 Nc X 1 1/2 Gd5, Hex) | 7 |
7n-6206 Pump Gp-Water
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 2 |
| 2W***03 | Pump Group-Water | 1 |
| 5F***06 | Packing,Preformed Pump Mtg Part Of Kit P/N 5r***25 | 1 |
106-3926 Pump Gp-Water
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 10***26 | Pump Group-Water | 1 |
155-0063 Pump Gp-Water
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 14***91 | Shaft-Water Pump | 1 |
172-7762 Pump Gp-Water
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 15***47 | Housing-Water Pump | 1 |
| 15***82 | Seal-Lip Type | 1 |
2w-8003 Pump Gp-Water
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 13***22 | Impeller-Pump | 1 |
106-3927 Pump Gp-Water
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 2 |
| 10***27 | Pump Group-Water | 1 |
| 17***62 | Pump Group-Water | 1 |
7e-5679 Radiator Gp
| 13***77 | Bracket | 2 |
| 2A***04 | Plate As | 2 |
| 4L***54 | Capscrew; (3/8-16x21 In) (Gd8) (Hex Hd) (4-Roller) | 4 |
168-7461 Radiator Gp
| 16***61 | Radiator Group | 1 |
| 6L***17 | Cap-Radiator; (7-Psi)(Coolant Tank) | 1 |
| 8N***46 | Neck-Filler | 1 |
151-0996 Regulator Gp-Temperature
| 11***77 | Regulator-Water Temperature; (86-Deg C To 97-Deg C) | 1 |
| 15***96 | Regulator Group-Temperature | 1 |
| 1W***10 | Pipe-Outlet | 1 |
140-6018 Spider As-Fan
| 14***18 | Spider As-Fan | 1 |
Electrical And Starting System
9x-7170 Lamp Gp-Head -High Beam
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
| 8T***33 | Nut (M10x1.50 Thd) | 1 |
9x-6874 Lamp Gp-Head -Low Beam
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 9X***55 | Body As-Lamp | 1 |
| 9X***63 | Lamp-Halogen; (24-Volt, 70-Watt)(Floodlight) | 1 |
171-2067 Lamp Gp-Head -High Beam
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***49 | Lens As; (Headlight, High Beam) | 1 |
| 15***52 | Bezel | 1 |
133-3035 Lamp Gp-Head -High Beam
| 13***35 | Lamp Group-Head; -High Beam | 1 |
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
171-2066 Lamp Gp-Head -Low Beam
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***52 | Bezel | 1 |
| 16***77 | Lens As; (Headlight, Low Beam) | 1 |
9x-7169 Lamp Gp-Head -Low Beam
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
| 8T***33 | Nut (M10x1.50 Thd) | 1 |
168-1960 Lamp Gp-Head -High Beam
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***49 | Lens As; (Headlight, High Beam) | 1 |
| 15***52 | Bezel | 1 |
133-3037 Lamp Gp-Head
| 13***37 | Lamp Group-Head | 1 |
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
3e-7586 Lamp Gp-Head & Signal
| 10***45 | Lamp; (24-Volt)(Running Lights), Cover | 1 |
| 10***47 | Body As-Lamp | 1 |
| 10***48 | Lens As; (Headlight)(High, Low Beam) | 1 |
9x-7164 Lamp Gp-Head -High Beam
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 9X***55 | Body As-Lamp | 1 |
| 9X***63 | Lamp-Halogen; (24-Volt, 70-Watt)(Floodlight) | 1 |
168-1953 Lamp Gp-Head -Low Beam
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***52 | Bezel | 1 |
| 16***77 | Lens As; (Headlight, Low Beam) | 1 |
9g-9813 Alarm Gp -Action
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
| 7N***37 | Housing-To Air Start Solenoid Valve | 1 |
123-6449 Alarm Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***49 | Alarm Group | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
112-4320 Alternator Ar-Charging
| 10***47 | Alternator Group-Charging; -24-Volt, 50-Ampere | 1 |
| 11***20 | Alternator Ar-Charging | 1 |
150-7668 Alternator Ar-Charging
| 11***23 | Circuit Breaker As; (105-Ampere) | 1 |
| 15***68 | Alternator Ar-Charging | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 2 |
150-7669 Alternator Ar-Charging
| 15***69 | Alternator Ar-Charging | 1 |
| 19***20 | Alternator Group-Charging; -24-Volt, 95-Ampere | 1 |
| 25***11 | Lockwasher | 2 |
112-4322 Alternator Ar-Charging
| 0S***70 | Cap Screw (5/8" Long) | 2 |
| 11***22 | Alternator Ar-Charging | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 2 |
7n-9720 Alternator Gp-Charging
| 1B***05 | Key; (Woodruff) | 1 |
| 1L***48 | Nut-Plated Jam; (7/16-14-Thd) | 1 |
| 2K***21 | Locknut (5/8-18 Thd) | 1 |
6n-9294 Alternator Gp-Charging
| 3T***52 | Alternator Group-Charging | 1 |
| 6N***94 | Alternator Group; (24-Volt, 35-Ampere) | 1 |
| 7N***20 | Alternator Group; Alternator Group (Robert Bosch) | 1 |
100-5046 Alternator Gp-Charging
| 10***46 | Alternator Group-Charging; -24-Volt, 50-Ampere | 1 |
| 1B***05 | Key; (Woodruff) | 1 |
| 2K***21 | Locknut (5/8-18 Thd) | 1 |
3t-6352 Alternator Gp-Charging
| 03***12 | Screw-Forming; (10-24x0.5-In) | 5 |
| 11***19 | Diode As-Alternator | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 1 |
112-5041 Alternator Gp-Charging
| 10***31 | Fan-Alternator; (11-Blade) | 1 |
| 10***32 | Collar; (Alternator) | 1 |
| 10***56 | Diode As; (Alternator) | 1 |
100-5047 Alternator Gp-Charging
| 10***45 | Alternator Group-Charging; (Nippondenso) | 1 |
| 10***46 | Alternator Group-Charging; -24-Volt, 50-Ampere | 1 |
| 10***47 | Alternator Group-Charging; -24-Volt, 50-Ampere | 1 |
100-5045 Alternator Gp-Charging
| 10***45 | Alternator Group-Charging; (Nippondenso) | 1 |
| 1B***05 | Key; (Woodruff) | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 1 |
114-2401 Alternator Gp-Charging
| 03***12 | Screw-Forming; (10-24x0.5-In) | 4 |
| 10***31 | Fan-Alternator; (11-Blade) | 1 |
| 10***32 | Collar; (Alternator) | 1 |
9g-4574 Alternator Gp-Charging
| 1B***05 | Key; (Woodruff) | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 1 |
| 2H***20 | Lockwasher (11.38mm Id) | 1 |
9x-7803 Alternator Gp-Charging
| 03***12 | Screw-Forming; (10-24x0.5-In) | 4 |
| 10***31 | Fan-Alternator; (11-Blade) | 1 |
| 10***32 | Collar; (Alternator) | 1 |
4p-2678 Alternator Gp-Charging
| 11***01 | Alternator Group-Charging | 1 |
| 12***94 | Strap-Belt Adjustment | 1 |
| 4P***78 | Alternator Group-Charging | 1 |
3e-7577 Alternator Gp-Charging
| 10***31 | Fan-Alternator; (11-Blade) | 1 |
| 10***32 | Collar; (Alternator) | 1 |
| 10***56 | Diode As; (Alternator) | 1 |
7c-1905 Alternator Gp-Charging
| 12***94 | Strap-Belt Adjustment | 1 |
| 1F***48 | Nut 12.70 mm(.50 In.) Thread | 1 |
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 1 |
316-7251 Alternator Gp-Charging
| 10***31 | Fan-Alternator; (11-Blade) | 1 |
| 18***34 | Nut-Flange; (5/8-18-Thd) | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 2 |
197-8820 Alternator Gp-Charging
| 18***38 | Collar | 2 |
| 18***39 | Fan As; (Alternator) | 1 |
| 18***44 | Coil Assem. | 1 |
8x-5325 Battery & Wiring Gp
| 06***61 | Cable As; (Negative) | 1 |
| 10***40 | Switch As-Magnetic; (Main Power Relay) | 1 |
| 10***71 | Harness As-Rear Lighting | 1 |
151-5610 Battery Gp
| 15***10 | Battery Group | 1 |
| 15***10 | Battery; (12-Volt, 1400-Cca) | 2 |
124-5815 Block Gp-Junction
| 12***15 | Block Group-Junction; -Battery | 1 |
| 1D***17 | Nut,Plain,Hexagon Starter Motor Assembly | 3 |
| 6V***22 | Tube-Heat Shrink; (25.4-mm Dia)(10-M) | 0 |
3e-5184 Control Gp-Secondary Steering
| 1S***93 | Strap; (Cable) (0.62in Dia) | 6 |
| 3E***84 | Control Group-Secondary Steering; -Electronic Monitoring System | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 5 |
145-1279 Converter Ar-Electrical
| 14***47 | Accessory Group-Cab; -High | 1 |
| 14***61 | Converter Group-Electrical | 1 |
| 14***79 | Converter Ar-Electrical; -High | 1 |
145-1278 Converter Ar-Electrical
| 14***42 | Accessory Group-Cab; -Low | 1 |
| 14***61 | Converter Group-Electrical | 1 |
| 14***78 | Converter Ar-Electrical; -Low | 1 |
2a-7346 Converter Gp-Electrical
| 20***85 | Converter Group-Electrical; (24-Volt To 12-Volt)(Air Conditioner, Heater) | 1 |
| 2A***46 | Converter Group-Electrical | 1 |
| 4L***54 | Capscrew; (3/8-16x21 In) (Gd8) (Hex Hd) (4-Roller) | 2 |
145-1297 Converter Gp-Electrical -Radio
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 14***97 | Converter Group-Electrical; -Radio | 1 |
| 20***85 | Converter Group-Electrical; (24-Volt To 12-Volt)(Air Conditioner, Heater) | 1 |
145-1261 Converter Gp-Electrical
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 14***61 | Converter Group-Electrical | 1 |
| 20***85 | Converter Group-Electrical; (24-Volt To 12-Volt)(Air Conditioner, Heater) | 1 |
112-0830 Converter Gp-Electrical
| 10***56 | Plate | 1 |
| 11***29 | Harness As-Radio | 1 |
| 11***30 | Converter Group-Electrical | 1 |
4n-3586 Heater Gp-Jacket Water
| 4N***86 | Heater Group-Jacket Water; (120v) | 1 |
| 6N***04 | Cap As-Dust; (Jacket Water Heater Elements) | 1 |
| 9G***57 | Element As-Jacket Water Heater; (120-Volt, 1250-Watt) | 1 |
8c-9678 Lamp Gp-Dome
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 2 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
| 7N***82 | Housing (Plug) (To Lift Kickout Switch) | 1 |
162-3294 Lamp Gp-Flood
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***52 | Bezel | 1 |
| 16***94 | Lamp Group-Flood; -Rear-Ladder Access-Engine Work Light | 1 |
9x-6775 Lamp Gp-Flood
| 10***52 | Seal | 1 |
| 10***53 | Lens As; (Floodlight) | 1 |
| 10***54 | Body As; (Lamp) | 1 |
9x-1439 Lamp Gp-Flood
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 1 |
| 8T***33 | Nut (M10x1.50 Thd) | 1 |
7x-6066 Lamp Gp-Signal
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
| 7N***37 | Housing-To Air Start Solenoid Valve | 1 |
8c-6207 Lamp Gp-Stop & Tail -Stop, Tail, Red
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 2 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
| 7N***82 | Housing (Plug) (To Lift Kickout Switch) | 1 |
130-3452 Lamp Gp-Stop & Tail
| 13***52 | Lamp Group-Stop & Tail | 1 |
128-6983 Lamp Gp-Warning Beacon -Rotating
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***83 | Lamp Group-Warning Beacon; -Rotating, Amber | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
116-1037 Lighting Ar-Flood
| 10***21 | Lighting Group-Flood | 1 |
| 11***25 | Lighting Group-Flood | 1 |
| 11***37 | Lighting Ar-Flood | 1 |
8w-7660 Lighting Ar-Flood & Signal
| 10***21 | Lighting Group-Flood | 1 |
| 10***23 | Lighting Group-Signal | 1 |
| 8W***60 | Lighting Ar-Flood & Signal | 1 |
160-7734 Lighting Gp-Backup
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 2 |
| 10***35 | Lamp Kit | 1 |
151-5924 Lighting Gp-Flood -Rh
| 12***97 | Panel | 1 |
| 12***22 | Bracket As | 1 |
| 12***23 | Wire As | 1 |
162-2968 Lighting Gp-Flood
| 09***79 | Plug | 2 |
| 10***78 | Switch As-Rotary; (Headlights-High/Low) | 1 |
| 10***58 | Flasher As; (24-Volt) | 1 |
105-2221 Lighting Gp-Flood
| 10***57 | Bracket Assem. | 4 |
| 10***21 | Lighting Group-Flood | 1 |
| 13***35 | Lamp Group-Head; -High Beam | 2 |
115-9925 Lighting Gp-Flood
| 10***78 | Switch As-Rotary; (Headlights-High/Low) | 1 |
| 10***58 | Flasher As; (24-Volt) | 1 |
| 10***19 | Clamp | 4 |
8w-7662 Lighting Gp-Flood
| 10***90 | Harness As-Front Lighting; (Blade) | 2 |
| 10***92 | Harness As-Rear Lighting; (Floodlights) | 2 |
| 10***93 | Harness As-Rear Lighting | 1 |
105-2223 Lighting Gp-Signal
| 10***78 | Switch As-Rotary; (Headlights-High/Low) | 1 |
| 10***23 | Lighting Group-Signal | 1 |
| 10***58 | Flasher As; (24-Volt) | 1 |
8x-5700 Lighting Gp-Warning -Amber, Warning Beacon
| 10***62 | Switch As; (Warning Beacon) | 1 |
| 10***32 | Plate As | 1 |
| 12***83 | Lamp Group-Warning Beacon; -Rotating, Amber | 1 |
7i-5011 Lighting Gp-Warning Beacon
| 10***62 | Switch As; (Warning Beacon) | 1 |
| 10***32 | Plate As | 1 |
| 11***18 | Clip | 1 |
117-3915 Motor Gp-Electric
| 11***15 | Motor Group-Electric; -Engine Prelubrication-Sec Steering, Brake Release | 1 |
| 6V***01 | Nut; (3/8-16-Thd)(Plate To Rh And Lh Bracket As) | 2 |
| 7X***08 | Washer-Hard; (10.2x16x2-mm Thk) | 2 |
170-5335 Motor Gp-Electric -Circulating Fan
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***35 | Motor Group-Electric; -Circulating Fan | 1 |
| 9W***52 | Pin-Connector; (14-Ga To 16-Ga) | 2 |
2a-7183 Receptacle Gp-Auxiliary Start
| 14***68 | Plate As | 1 |
| 14***69 | Receptacle As | 1 |
| 1F***50 | Nut Rops Support | 4 |
6i-2108 Solenoid Gp-Shutoff
| 15***53 | Solenoid As; (Fuel Shutoff) | 1 |
| 2A***46 | Bolt,Machine Governor Linkage Bracket | 2 |
| 4B***74 | Washer (Required Only When Bosch Alternator Is Fitted) | 1 |
8x-5270 Starting Aid Gp-Ether
| 2G***58 | Tube | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 1 |
| 5K***06 | Bolt-Plt; (5/16unc X 5/8) | 4 |
108-6495 Starting Aid Gp-Ether
| 10***95 | Starting Aid Group-Ether | 1 |
| 11***39 | Tube | 1 |
| 3B***64 | Bushing; (Reducing) | 1 |
6v-5538 Starting Motor Gp-Electric
| 3E***25 | Cover As; (Starting Motor) | 1 |
| 3E***27 | Kit-Bearing; (Starting Motor)(Incl Bearing Seals & Spacers) | 1 |
| 3E***28 | Kit; (Brush) (Includes O-Rings, Screw, Spring, & Brush) | 1 |
1w-3851 Starting Motor Gp-Electric
| 1W***51 | Starting Motor Group-Electric | 1 |
| 20***54 | Starting Motor Group-Electric | 1 |
| 4H***69 | Gasket Starter Mtg Part Of Kit P/N 5r***25 | 1 |
207-1554 Starting Motor Gp-Electric
| 20***54 | Starting Motor Group-Electric | 1 |
| 20***55 | Starting Motor Group-Electric; (Delco Remy) | 1 |
| 6V***26 | Starting Motor Group-Electric | 1 |
106-8552 Starting Motor Gp-Electric
| 10***52 | Starting Motor Group-Electric | 1 |
| 5C***74 | Nut (M5x.8 Thd); (M5x0.8-Thd) | 2 |
| 7X***62 | Washer-Hard; (13.5x19x0.8-mm Thk) | 5 |
207-1560 Starting Motor Gp-Electric
| 20***60 | Starting Motor Group-Electric | 1 |
| 20***61 | Starting Motor Group-Electric | 1 |
| 6V***38 | Starting Motor Group-Electric | 1 |
6v-5023 Starting Motor Gp-Electric
| 5C***74 | Nut (M5x.8 Thd); (M5x0.8-Thd) | 2 |
| 6V***23 | Starting Motor Group-Electric | 1 |
| 7X***62 | Washer-Hard; (13.5x19x0.8-mm Thk) | 5 |
6v-5227 Starting Motor Gp-Electric
| 10***52 | Starting Motor Group-Electric | 1 |
| 6V***27 | Starting Motor Group-Electric | 1 |
| 6V***37 | Starting Motor Group-Electric | 1 |
207-1555 Starting Motor Gp-Electric
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 19***70 | Solenoid As-Starting Motor; (24-Volt)(Starting Motor) | 1 |
| 20***55 | Starting Motor Group-Electric; (Delco Remy) | 1 |
6v-5226 Starting Motor Gp-Electric
| 3E***25 | Cover As; (Starting Motor) | 1 |
| 3E***27 | Kit-Bearing; (Starting Motor)(Incl Bearing Seals & Spacers) | 1 |
| 3E***28 | Kit; (Brush) (Includes O-Rings, Screw, Spring, & Brush) | 1 |
106-8555 Starting Motor Gp-Electric
| 10***55 | Starting Motor Group-Electric | 1 |
| 6V***23 | Starting Motor Group-Electric | 1 |
| 6V***07 | Starting Motor Group-Electric | 1 |
207-1561 Starting Motor Gp-Electric
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 20***61 | Starting Motor Group-Electric | 1 |
| 25***79 | Kit-Solenoid; (24-Volt)(Starting Motor) | 1 |
6v-5207 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 2H***29 | Ring - Retaining External | 1 |
6v-5537 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 2H***29 | Ring - Retaining External | 1 |
3e-9169 Suppressor Gp-Electronic
| 3E***69 | Suppressor Group-Electronic | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 2 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 2 |
105-8827 Suppressor Gp-Electronic
| 10***27 | Suppressor Group-Electronic; -Air Conditioner Compressor | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 2 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 2 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
142-3985 Switch Gp-Magnetic
| 14***85 | Switch As-Magnetic; -Secondary Steering Relay-Engine Prelubrication Relay | 1 |
| 1B***78 | Nut,Plain,Hexagon Rod To Lever Uoc:Bsv,Bsx | 2 |
| 6V***78 | Nut; (10-32-Thd) | 2 |
142-3984 Switch Gp-Magnetic
| 14***84 | Switch As-Magnetic; -Secondary Steering Relay-Engine Prelubrication Relay | 1 |
| 1B***78 | Nut,Plain,Hexagon Rod To Lever Uoc:Bsv,Bsx | 2 |
| 4D***26 | Washer,Lock Starter Ground Cable, Internal And External Teeth | 2 |
167-0138 Switch Gp-Magnetic
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***38 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
3e-0154 Switch Gp-Magnetic
| 3E***54 | Switch Group-Magnetic; -Secondary Steering Relay-Engine Prelubrication Relay | 1 |
| 4D***26 | Washer,Lock Starter Ground Cable, Internal And External Teeth | 2 |
| 6V***78 | Nut; (10-32-Thd) | 2 |
3e-7279 Switch Gp-Magnetic
| 01***80 | Lockwasher | 2 |
| 1H***38 | Lockwasher, External Tooth (1/4); W/O Freespool Qty Is 6 | 2 |
| 3E***79 | Switch Group-Magnetic; -Starting Motor | 1 |
241-8368 Switch Gp-Magnetic
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 24***68 | Switch Group-Magnetic; -Main Power Relay-Main Relay | 1 |
254-3783 Switch Gp-Magnetic
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 25***83 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
9g-7641 Switch Gp-Start -Engine, Key
| 6V***62 | Screw-Machine; (8-32x0.31-In) | 4 |
| 7T***99 | Nut-Mounting; (1-32-Thd) | 1 |
| 9B***33 | Lockwasher; (Int'L Tooth) | 4 |
119-0793 Wiring Gp-Blade Cushion
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 10***24 | Harness As-Solenoid; (Blade Cushion) | 1 |
| 11***93 | Wiring Group-Blade Cushion | 1 |
8w-7455 Wiring Gp-Cab
| 01***16 | Setscrew; (8-32x0.5-In) | 1 |
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 3 |
| 10***61 | Harness As-Cab; (Rear)(Rear Cab) | 1 |
151-6925 Wiring Gp-Cab
| 10***62 | Switch As; (Warning Beacon) | 1 |
| 10***32 | Plate As | 1 |
| 11***18 | Clip | 1 |
8x-8050 Wiring Gp-Console
| 10***33 | Harness As-Platform; (Console) | 1 |
| 2V***59 | Grommet | 2 |
| 3E***09 | Plug; (Rocker Switch)(Front Floodlight) | 2 |
149-4351 Wiring Gp-Differential Lock
| 12***61 | Actuator-Rocker; (Differential Lock) | 1 |
| 13***19 | Switch As-Rocker; (Differential Lock) | 0 |
| 13***20 | Switch As; (Differential Lock Control) | 1 |
8x-8772 Wiring Gp-Engine
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 10***16 | Switch As-Pressure; (Ems Arming) | 1 |
142-8082 Wiring Gp-Front
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***01 | Clip | 1 |
8x-5320 Wiring Gp-Front
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 10***01 | Clip | 1 |
| 11***98 | Harness As-Platform | 1 |
103-6410 Wiring Gp-Power Receptacle
| 10***10 | Wiring Group-Power Receptacle | 1 |
| 11***99 | Harness As-Power; (Power Receptacle) | 1 |
| 8M***72 | Clip (For 12.70 mm(.50 In.) Hose | 2 |
2a-7181 Wiring Gp-Secondary Steering
| 03***07 | Terminal-Ring; (0-Ga, 3/8-In Screw) | 2 |
| 10***85 | Harness As-Steering; (Supplemental Steering) | 1 |
| 10***02 | Cable As | 1 |
8x-8773 Wiring Gp-Steering Console
| 10***83 | Plate | 1 |
| 11***46 | Harness As-Cab; (Steering Console) | 1 |
| 12***41 | Service Meter Kit | 1 |
Engine Arrangement
146-4347 Engine Ar
| 10***61 | Suppression Group-Sound | 1 |
| 10***63 | Suppression Group-Sound | 1 |
| 10***27 | Pump Group-Water | 1 |
146-4346 Engine Ar
| 10***27 | Pump Group-Water | 1 |
| 10***08 | Lines Group-Air | 1 |
| 10***57 | Pump Group-Engine Oil | 1 |
110-5761 Engine Ar
| 10***44 | Lines Group-Water | 1 |
| 10***27 | Pump Group-Water | 1 |
| 10***08 | Lines Group-Air | 1 |
7e-9949 Engine Ar
| 11***20 | Lines Group-Air | 1 |
| 11***41 | Lines Group-Fuel Injection | 1 |
| 12***09 | Lines Group-Air Compressor | 1 |
110-5762 Engine Ar
| 10***61 | Suppression Group-Sound | 1 |
| 10***63 | Suppression Group-Sound | 1 |
| 10***44 | Lines Group-Water | 1 |
7e-9341 Installation Ar-Engine
| 10***12 | Drive Group-Fan | 1 |
| 11***11 | Muffler & Mounting Group | 1 |
| 13***09 | Mounting Group-Engine Oil Filter | 1 |
Frame And Body
113-9100 Axle Gp-Front
| 0S***92 | Bolt--Cover To Flywheel Housing | 2 |
| 0V***75 | Screw,Cap,Hexagon H Shaft Mtg,Accessory Drive | 6 |
| 11***98 | Pin | 1 |
8x-5330 Box Gp-Battery
| 13***25 | Support As-Lh | 1 |
| 13***26 | Support As-Rh | 1 |
| 14***20 | Latch As | 2 |
107-3189 Bumper Gp-Rear
| 10***59 | Bumper As | 1 |
| 10***89 | Bumper Group-Rear | 1 |
| 1F***50 | Nut Rops Support | 5 |
8x-5475 Case & Frame Gp
| 11***80 | Case & Frame As | 1 |
| 2A***98 | Gasket | 1 |
| 2D***38 | Stud-Taperlock; (5/8-11x2.5-In) | 12 |
113-9813 Cover Gp-Protection
| 11***13 | Cover Group-Protection | 1 |
| 12***03 | Cover-Door | 2 |
| 12***04 | Cover-Radiator | 1 |
134-3913 Cover Gp-Protection
| 12***06 | Stud | 40 |
| 13***13 | Cover Group-Protection | 1 |
| 13***15 | Cover-Door | 2 |
103-1236 Enclosure Gp-Engine
| 10***36 | Enclosure Group-Engine | 1 |
| 11***57 | Rod | 2 |
| 11***18 | Panel As; (Rh) | 1 |
8x-4408 Frame Gp-Front
| 11***02 | Cover | 1 |
| 11***03 | Cover | 1 |
| 11***85 | Cover | 2 |
140-7616 Guard & Support Gp-Radiator
| 10***96 | Grill As-Radiator | 1 |
| 11***17 | Handrail | 2 |
| 12***27 | Seal; (95-cm Each) | 0 |
8w-5385 Guard & Support Gp-Radiator
| 10***96 | Grill As-Radiator | 1 |
| 10***56 | Support As | 1 |
| 11***17 | Handrail | 2 |
8x-9310 Guard Gp-Bottom
| 0L***78 | Bolt,Machine Governor And Decelerator Control | 4 |
| 3S***49 | Washer-Hard; (31x52.5x6-mm Thk) | 2 |
| 4L***54 | Capscrew; (3/8-16x21 In) (Gd8) (Hex Hd) (4-Roller) | 8 |
8x-9311 Guard Gp-Bottom -Eu
| 0L***78 | Bolt,Machine Governor And Decelerator Control | 4 |
| 3S***49 | Washer-Hard; (31x52.5x6-mm Thk) | 2 |
| 5P***52 | Washer 6.35 mm(.25 In.) Thick | 4 |
111-4925 Guard Gp-Brake Lines
| 11***25 | Guard Group-Brake Lines | 1 |
| 5P***75 | Washer-Hard; (10.2x22.5x3-mm Thk)(Shield To A/C) | 16 |
| 5S***79 | Hex Head Capscrew, 3/8 Nc X 7/8 In. (22 mm) | 16 |
7i-5045 Guard Gp-Platform -Rops
| 16***82 | Grommet | 1 |
| 3P***39 | Grommet | 1 |
| 3S***93 | Strap-Cable-To Tie Harnesses Together | 1 |
8x-4154 Guard Gp-Platform -Non-Rops
| 13***94 | Pipe As | 1 |
| 16***82 | Grommet | 1 |
| 3H***00 | Grommet 33.5mm I. D. | 1 |
106-4885 Hitch Gp-Articulating
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 6 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 2 |
| 0S***89 | Bolt, Hex. Hd., 5/8"-11 N.C. X 1 3/4" | 4 |
7i-4610 Lines Gp-Lubrication
| 3B***69 | Elbow-Adapter To Fitting | 2 |
| 3B***33 | Fitting; (Nipple-Pipe) | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 2 |
128-2522 Lines Gp-Lubrication
| 12***22 | Lines Group-Lubrication | 1 |
| 3B***69 | Elbow-Adapter To Fitting | 1 |
| 3B***33 | Fitting; (Nipple-Pipe) | 1 |
141-6140 Link Gp-Steering
| 14***36 | Tie Rod Group; (Steering) | 1 |
| 14***37 | Tie Rod Group; (Steering) | 1 |
| 14***40 | Link Group-Steering | 1 |
8d-2818 Link Gp-Steering
| 1D***06 | Nut-Slotted | 1 |
| 8D***18 | Link Group-Steering | 1 |
| 8W***18 | Tie Rod Group; (Rh Thd) | 1 |
8x-7729 Panel Gp-Sound Suppression
| 10***66 | Panel-Insulation; (Lh) | 1 |
| 12***52 | Panel-Insulation; (Rh) | 1 |
| 8X***27 | Plate | 4 |
140-9808 Protection Ar-Snow Plow
| 14***08 | Protection Ar-Snow Plow | 1 |
| 14***10 | Cover Group-Fan | 1 |
| 14***02 | Cover As-Air Cleaner | 1 |
196-9642 Protection Ar-Snow Plow -Fan
| 10***13 | Adapter | 1 |
| 14***10 | Cover Group-Fan | 1 |
| 14***02 | Cover As-Air Cleaner | 1 |
113-9819 Protection Ar-Snow Plow
| 11***25 | Guard Group-Brake Lines | 1 |
| 11***13 | Cover Group-Protection | 1 |
| 11***19 | Protection Ar-Snow Plow | 1 |
140-9814 Protection Ar-Snow Plow
| 11***25 | Guard Group-Brake Lines | 1 |
| 12***59 | Plate | 1 |
| 13***27 | Cover | 1 |
6g-6910 Guard Gp-Drive Shaft
| 5P***76 | Washer Guard To Support Assembly And Guard Assembly | 8 |
| 6G***22 | Shield As; (Lh) | 1 |
| 6G***23 | Shield As; (Rh) | 1 |
8x-1035 Step Gp -Belted
| 12***98 | Plate; (Rh) | 2 |
| 12***99 | Plate; (Lh) | 2 |
| 14***43 | Support-Step; (Rubber)(Step Access) | 4 |
119-8958 Support Gp-Battery
| 11***58 | Support Group-Battery | 1 |
| 11***60 | Plate As | 2 |
| 1F***50 | Nut Rops Support | 4 |
113-5911 Suppression Ar-Sound
| 10***43 | Drive Group-Fan | 1 |
| 10***95 | Starting Aid Group-Ether | 1 |
| 11***62 | Engine Ar | 1 |
Fuel System
7c-8993 Fastener Gp-Fuel Inj Pump
| 0S***14 | Bolt (.25" Diameter-.50" Long) | 3 |
| 2S***83 | Bolt (3.25" Long-Drilled Head) | 1 |
| 4F***57 | Screw,Cap,Hexagon H Shock Mount To Bracket | 8 |
6i-2832 Pump Gp-Fuel Injection
| 0S***15 | Bolt 19 mm (.75 In.) Long Return Air Console To Enclosed Rops | 4 |
| 11***18 | Seal-O-Ring; (26.64mm Id) | 6 |
| 15***24 | Gasket-Timing | 1 |
120-9931 Pump Gp-Fuel Injection
| 0S***15 | Bolt 19 mm (.75 In.) Long Return Air Console To Enclosed Rops | 4 |
| 11***18 | Seal-O-Ring; (26.64mm Id) | 6 |
| 12***29 | Camshaft As | 1 |
4p-9827 Pump Gp-Fuel Injection
| 1W***87 | Valve As-Check; (Fuel Injection Pump) | 1 |
| 4P***27 | Pump Group-Fuel Injection | 1 |
| 4P***30 | Plunger & Barrel Assem. | 1 |
7w-5928 Pump Gp-Fuel Injection
| 1W***87 | Valve As-Check; (Fuel Injection Pump) | 1 |
| 1W***71 | Bonnet-Valve | 1 |
| 7C***78 | Bolt-Plunger Gear; (Fuel Pump) | 1 |
111-3769 Pump Gp-Fuel Injection
| 0S***15 | Bolt 19 mm (.75 In.) Long Return Air Console To Enclosed Rops | 4 |
| 11***69 | Pump Group-Fuel Injection | 1 |
| 11***70 | Camshaft Group | 1 |
1w-3597 Torque Control Gp
| 1P***52 | Insulator,Bushing Governor | 1 |
| 1W***97 | Torque Control Group | 1 |
| 2P***85 | Spacer (.635 mm Thk); (0.635-mm Thk) | 1 |
1w-8668 Torque Control Gp
| 1P***52 | Insulator,Bushing Governor | 1 |
| 1W***68 | Torque Control Group | 1 |
| 2P***85 | Spacer (.635 mm Thk); (0.635-mm Thk) | 1 |
106-4983 Adapter Gp-Fast Fill Fuel
| 10***09 | Cap As-Filler; (Fast Fill Fuel) | 1 |
| 10***83 | Adapter Group-Fast Fill Fuel | 1 |
| 12***71 | Clamp-Hose | 3 |
123-6018 Control Ar-Governor
| 10***95 | Starting Aid Group-Ether | 1 |
| 11***61 | Engine Ar | 1 |
| 12***18 | Control Ar-Governor | 1 |
4w-1339 Control Gp-Fuel Ratio
| 2D***92 | Gasket Shaft Part Of Kit P/N 5r***25 | 1 |
| 4W***39 | Control Group-Fuel Ratio | 1 |
| 5P***37 | Washer 5t***54 Plate To 7t***28 Cable As | 2 |
7w-2830 Control Gp-Fuel Ratio
| 10***93 | Washer | 1 |
| 11***58 | Washer; (12.7x6.65x0.79-mm Thk) | 1 |
| 2A***46 | Bolt,Machine Governor Linkage Bracket | 2 |
111-5162 Control Gp-Fuel Ratio
| 10***93 | Washer | 1 |
| 11***62 | Control Group-Fuel Ratio (Basic) | 1 |
| 11***58 | Washer; (12.7x6.65x0.79-mm Thk) | 1 |
8x-3990 Control Gp-Governor
| 00***08 | Setscrew-Socket; (3/8-16x0.5-In) | 1 |
| 0V***96 | Bolt 1.125 In. (2.86 cm) Long | 2 |
| 11***64 | Boot | 3 |
1w-2481 Cover Gp-Tachometer Drive
| 0S***15 | Bolt 19 mm (.75 In.) Long Return Air Console To Enclosed Rops | 2 |
| 1W***81 | Cover Group-Tachometer Drive; Tachometer Drive Cover Group | 1 |
| 4M***03 | Packing,Preformed Hourmeter Mtg | 1 |
6i-1370 Filter Gp-Primary Fuel
| 1L***69 | Ring-Retaining | 1 |
| 2H***29 | Ring - Retaining External | 1 |
| 2J***57 | Packing,Preformed Screw Assembly Part Of Kit P/N 5r***25 | 1 |
2w-3282 Filter Gp-Secondary Fuel
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 1 |
| 1R***50 | Filter As-Fuel; (Advanced Efficiency)(Secondary) | 1 |
| 2W***82 | Filter Group-Secondary Fuel | 1 |
2w-6559 Governor Gp
| 03***16 | Bolt-Self Locking; (1/4unc X 3/4) | 3 |
| 0S***16 | Screw,Cap,Hexagon H Receptacle Mtg; Bolt Brackets To Firewall Assembly | 6 |
| 15***28 | Gasket-Governor | 1 |
2w-2410 Governor Gp
| 03***16 | Bolt-Self Locking; (1/4unc X 3/4) | 3 |
| 0S***16 | Screw,Cap,Hexagon H Receptacle Mtg; Bolt Brackets To Firewall Assembly | 6 |
| 13***07 | Seal-Lip Type; (6.39mm) | 1 |
8w-6265 Lines Gp-Fuel
| 12***34 | Hose As | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
| 2T***43 | Hose As | 1 |
113-5341 Lines Gp-Fuel Injection
| 06***58 | Seal-O-Ring; (Oil Pan Drain Plug) | 1 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
4p-9331 Lines Gp-Fuel Injection
| 12***05 | Bracket Assem. | 1 |
| 1W***68 | Clamp-Fuel Line; (Non-Threaded)(Thru Hole) | 4 |
| 1W***69 | Clamp-Fuel Line; (Threaded)(Threaded) | 2 |
4p-9330 Lines Gp-Fuel Injection
| 10***53 | Line As-Fuel Injection; (Cyl No. 3) | 1 |
| 10***54 | Line As-Fuel Injection; (Cyl No. 4) | 1 |
| 1W***67 | Clamp As-Fuel Line (With Spacer) | 2 |
119-8731 Lines Gp-Fuel Injection
| 06***58 | Seal-O-Ring; (Oil Pan Drain Plug) | 1 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
128-7984 Protection Gp-Fuel System
| 12***94 | Bolt-Tamperproof; (28.58mm) | 1 |
| 12***96 | Bolt-Tamperproof; (95.25mm) | 1 |
| 12***84 | Protection Group-Fuel System | 1 |
4n-3287 Pump Gp-Fuel Priming
| 10***08 | Pump As; (Fuel Priming) | 1 |
| 1P***36 | Gasket; (Fuel Priming Pump)(Fuel Priming Pump) | 1 |
| 4N***87 | Pump Group-Fuel Priming; Pump Group-Fuel Priming | 1 |
1w-1695 Pump Gp-Fuel Transfer
| 0S***15 | Bolt 19 mm (.75 In.) Long Return Air Console To Enclosed Rops | 2 |
| 1W***69 | Piston | 1 |
| 1W***95 | Pump Group-Fuel Transfer | 1 |
2w-4160 Pump & Mtg Gp-Fuel Transfer
| 1W***95 | Pump Group-Fuel Transfer | 1 |
| 2W***60 | Pump Group-Fuel Transfer & Mtg; Fuel Transfer Pump And Mounting Group | 1 |
| 4B***65 | Screw,Cap,Hexagon Fuel Injection Pump | 1 |
128-8807 Pump Gp-Gov & Fuel Inj
| 03***79 | Seal-O-Ring (Id=10.82mm) | 1 |
| 11***69 | Pump Group-Fuel Injection | 1 |
| 11***62 | Control Group-Fuel Ratio (Basic) | 1 |
130-6002 Pump Gp-Gov & Fuel Inj
| 03***79 | Seal-O-Ring (Id=10.82mm) | 1 |
| 11***69 | Pump Group-Fuel Injection | 1 |
| 11***62 | Control Group-Fuel Ratio (Basic) | 1 |
7e-9952 Pump Gp-Gov & Fuel Inj
| 03***79 | Seal-O-Ring (Id=10.82mm) | 1 |
| 11***49 | Setscrew-Socket | 1 |
| 1B***13 | Bolt,Machine Governor And Decelerator Control | 2 |
116-2768 Pump Gp-Gov & Fuel Inj
| 03***79 | Seal-O-Ring (Id=10.82mm) | 1 |
| 11***62 | Control Group-Fuel Ratio (Basic) | 1 |
| 11***49 | Setscrew-Socket | 1 |
8x-5285 Tank Gp-Fuel
| 00***86 | Connector-Hose (1/4-18nptf Thd) | 1 |
| 14***62 | Tank As-Fuel | 1 |
| 15***50 | Sender As-Fuel Level | 1 |
2g-9000 Valve As-Tank -Fast Fill Fuel
| 2G***00 | Valve As-Tank | 1 |
Hydraulic System
149-2610 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***10 | Valve Group-Solenoid; -Axle Oil Cooler-Hydraulic Lockout | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
149-2658 Valve Gp-Solenoid
| 11***43 | Locknut; (5/16-18-Thd) | 1 |
| 14***11 | Cartridge Assem. | 1 |
| 14***58 | Valve Group-Solenoid; -Blade Lock | 1 |
9x-9482 Valve Gp-Solenoid
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
6t-8046 Valve Gp-Solenoid
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
| 3G***71 | Cartridge Assem. | 1 |
| 3G***75 | Seal Kit; (Includes Seals And Ring) | 1 |
6g-1320 Accumulator & Mtg Gp-Hydraulic
| 0S***73 | Bolt (102mm Long); (1/2-13x4-In) | 2 |
| 3G***97 | Accumulator Group-Hydraulic | 2 |
| 5P***45 | Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate) | 5 |
166-3367 Accumulator & Mtg Gp-Hydraulic
| 16***13 | Accumulator Group-Hydraulic | 2 |
| 16***49 | Clamp | 2 |
| 16***67 | Accumulator & Mtg Group-Hydraulic | 1 |
119-0792 Accumulator Ar-Blade Cushion
| 11***92 | Accumulator Ar-Blade Cushion | 1 |
| 11***93 | Wiring Group-Blade Cushion | 1 |
| 11***94 | Lines Group-Accumulator | 1 |
3g-7399 Accumulator Gp-Hydraulic
| 3G***97 | Accumulator Group-Hydraulic | 1 |
| 3G***99 | Accumulator Group | 1 |
219-8064 Accumulator Gp-Blade Cushion -Uncharged
| 17***93 | Kit-Seal; (Hydraulic Accumulator) | 1 |
| 19***50 | Core | 1 |
| 21***64 | Accumulator Group-Blade Cushion; -Uncharged | 1 |
160-9413 Accumulator Gp-Hydraulic
| 11***10 | Protector-Gas Valve | 1 |
| 13***23 | Piston | 1 |
| 16***13 | Accumulator Group-Hydraulic | 1 |
3g-7397 Accumulator Gp-Hydraulic
| 17***85 | Core-Valve | 1 |
| 1H***28 | Seal (3.73 In. Inside Diameter) | 2 |
| 2K***30 | Ring-Back-Up | 2 |
254-0217 Control Ar-Hydraulic
| 16***08 | Lines Group-Ripper | 1 |
| 25***17 | Control Ar-Hydraulic | 1 |
| 25***42 | Valve & Linkage Group | 1 |
124-4201 Control Ar-Hydraulic
| 11***44 | Lines Group-Ripper | 1 |
| 12***97 | Valve & Linkage Group; -Bank 4 Rh-Bank 5 Lh-Eu | 1 |
| 12***01 | Control Ar-Hydraulic | 1 |
124-4202 Control Ar-Hydraulic
| 11***44 | Lines Group-Ripper | 1 |
| 12***98 | Valve & Linkage Group; -Bank 5-Lh-Rh-Eu | 1 |
| 12***02 | Control Ar-Hydraulic | 1 |
124-4208 Control Ar-Hydraulic
| 11***44 | Lines Group-Ripper | 1 |
| 12***00 | Valve & Linkage Group; -Bank 5 Rh-Bank 7 Lh-Eu | 1 |
| 12***08 | Control Ar-Hydraulic | 1 |
7i-4869 Control Ar-Hydraulic
| 11***44 | Lines Group-Ripper | 1 |
| 7I***69 | Control Ar-Hydraulic | 1 |
| 7I***70 | Valve & Linkage Group; -Bank 5-Lh-Rh | 1 |
7i-4868 Control Ar-Hydraulic
| 11***44 | Lines Group-Ripper | 1 |
| 7I***68 | Control Ar-Hydraulic | 1 |
| 7I***71 | Valve & Linkage Group; -Bank 4 Rh-Bank 5 Lh | 1 |
107-9663 Control Ar-Hydraulic
| 10***62 | Valve & Linkage Group; -Bank 5 Rh-Bank 7 Lh-Wing Tilt | 1 |
| 10***63 | Control Ar-Hydraulic | 1 |
| 11***44 | Lines Group-Ripper | 1 |
254-0215 Control Ar-Hydraulic
| 16***08 | Lines Group-Ripper | 1 |
| 25***15 | Control Ar-Hydraulic | 1 |
| 25***40 | Valve & Linkage Group | 1 |
8x-4141 Control Gp-Centershift Lock
| 14***57 | Plate | 1 |
| 1F***51 | Tee,Pipe Fuel Primer | 1 |
| 2N***79 | Machine Screw--Wire Assembly To Panel | 4 |
8x-5485 Control Gp-Centershift Lock
| 11***05 | Bracket | 1 |
| 1F***51 | Tee,Pipe Fuel Primer | 1 |
| 2N***79 | Machine Screw--Wire Assembly To Panel | 4 |
8w-3251 Cylinder & Mtg Gp-Articulation
| 1A***35 | Bolt 2.00 In. (5.08 cm) Long | 2 |
| 1A***37 | Bolt Clutch Assembly To Bracket (Fan Support) | 2 |
| 2K***60 | Washer; (2.016x4x0.032-In Thk) | 14 |
8w-3254 Cylinder & Mtg Gp-Blade Lift
| 17***03 | Cylinder Group-Lift | 2 |
| 1D***90 | Bolt 4.75 In.(120.65 mm) Long | 8 |
| 1D***29 | Bolt (7/8-9x3.5in); (7/8-9x3.5-In) | 4 |
8w-3255 Cylinder & Mtg Gp-Blade Tip
| 5P***28 | Capscrew; (Hex Hd) (1/2-13 Unc X 1.00, Gd 8 Z) | 2 |
| 8T***23 | Washer-Hard; (13.5x25.5x3-mm Thk)(Bolt To Shield) | 2 |
| 8W***55 | Cylinder & Mtg Group-Blade Tip | 1 |
8w-3256 Cylinder & Mtg Gp-Centershift
| 15***79 | Cylinder Group-Centershift | 1 |
| 1D***29 | Bolt (7/8-9x3.5in); (7/8-9x3.5-In) | 4 |
| 2G***99 | Cap | 2 |
8w-3257 Cylinder & Mtg Gp-Sideshift
| 1D***26 | Bolt 6.99 cm(2.75 In.) Long | 4 |
| 1H***78 | Pin | 1 |
| 1K***72 | Locknut Horn To Guard | 1 |
8w-3253 Cylinder & Mtg Gp-Steering
| 14***36 | Tie Rod Group; (Steering) | 2 |
| 16***95 | Cylinder Group-Steering; -Rh | 1 |
| 16***96 | Cylinder Group-Steering; -Lh | 1 |
8w-3252 Cylinder & Mtg Gp-Wheel Lean
| 0S***92 | Bolt--Cover To Flywheel Housing | 1 |
| 12***43 | Cylinder Group-Wheel Lean | 1 |
| 2G***67 | Retainer | 1 |
9t-8944 Cylinder Gp-Blade Tip
| 17***83 | Bolt-Hex Head; (M30x3.5x90mm) | 1 |
| 17***00 | Seal-O-Ring | 1 |
| 22***82 | Seal-Wiper | 0 |
157-4679 Cylinder Gp-Centershift
| 15***79 | Cylinder Group-Centershift | 1 |
| 15***84 | Cylinder As | 1 |
| 15***93 | Rod As | 1 |
209-5773 Cylinder Gp-Centershift
| 15***93 | Rod As | 1 |
| 16***00 | Seal Assem. | 1 |
| 16***07 | Seal-U-Cup | 1 |
9t-2696 Cylinder Gp-Centershift
| 2H***45 | Retainer,Packing Body Part Of Kit P/N 4j***80 | 1 |
| 2R***36 | Ring-Retaining | 1 |
| 4J***24 | Ring (Rubber) | 1 |
6e-4724 Cylinder Gp-Hydraulic -Articulation
| 16***95 | Seal As-Buffer | 1 |
| 16***04 | Seal-U-Cup | 1 |
| 16***57 | Seal-Wiper | 1 |
9t-2703 Cylinder Gp-Lift
| 16***00 | Seal Assem. | 1 |
| 16***07 | Seal-U-Cup | 1 |
| 16***59 | Seal-Wiper | 1 |
175-2603 Cylinder Gp-Lift
| 16***00 | Seal Assem. | 1 |
| 16***07 | Seal-U-Cup | 1 |
| 17***83 | Bolt-Hex Head; (M30x3.5x90mm) | 1 |
113-5264 Cylinder Gp-Ripper
| 11***64 | Cylinder Group-Ripper | 1 |
| 11***76 | Cylinder As | 1 |
| 11***81 | Rod As | 1 |
9t-3206 Cylinder Gp-Sideshift
| 16***01 | Seal As-Buffer | 1 |
| 16***12 | Seal-U-Cup | 1 |
| 17***81 | Head | 1 |
9t-1721 Cylinder Gp-Steering
| 1L***75 | Ring-Retaining | 1 |
| 1N***99 | Plug-O-Ring; (Straight Thread) | 2 |
| 2D***52 | Bearing | 1 |
165-2495 Cylinder Gp-Steering -Rh
| 15***49 | Head | 1 |
| 16***95 | Cylinder Group-Steering; -Rh | 1 |
| 16***91 | Seal As-Buffer | 1 |
165-2496 Cylinder Gp-Steering -Lh
| 15***49 | Head | 1 |
| 16***96 | Cylinder Group-Steering; -Lh | 1 |
| 16***91 | Seal As-Buffer | 1 |
9t-1301 Cylinder Gp-Steering
| 1L***75 | Ring-Retaining | 1 |
| 1N***99 | Plug-O-Ring; (Straight Thread) | 2 |
| 2D***52 | Bearing | 1 |
121-9243 Cylinder Gp-Wheel Lean
| 12***43 | Cylinder Group-Wheel Lean | 1 |
| 12***46 | Rod As | 1 |
| 12***76 | Cylinder As | 1 |
130-3535 Detent Gp-Control Valve
| 10***74 | Retainer | 1 |
| 12***87 | Piston | 1 |
| 12***88 | Retainer | 1 |
108-4916 Detent Gp-Control Valve
| 10***74 | Retainer | 1 |
| 10***75 | Retainer | 1 |
| 10***23 | Spring | 1 |
8x-5302 Drive Gp-Circle
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 7 |
| 1A***15 | Nut; (23/4x17/8-Thd) | 1 |
| 1B***38 | Cup-Roller Bearing | 2 |
8x-5301 Drive Gp-Circle
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 4 |
| 1A***15 | Nut; (23/4x17/8-Thd) | 1 |
| 1B***38 | Cup-Roller Bearing | 2 |
8d-5000 Shaft Gp-Pump Drive
| 02***91 | Nut-Jam | 1 |
| 0S***84 | Cap Screw (2 1/4" Long) | 4 |
| 11***97 | Slip Joint Group | 1 |
6g-1545 Extension Gp-Centershift
| 1B***32 | Nut-Full; (7/8-9-Thd) | 1 |
| 1D***30 | Bolt 101.6 mm(4 In.) Long | 2 |
| 2G***04 | Shim; (0.5-mm Thk) | 2 |
119-0794 Lines Gp-Accumulator
| 11***82 | Hose As | 1 |
| 11***90 | Hose As | 1 |
| 11***94 | Lines Group-Accumulator | 1 |
106-4788 Lines Gp-Hydraulic
| 10***88 | Lines Group-Hydraulic | 1 |
| 10***10 | Clamp | 5 |
| 11***98 | Hose As | 1 |
106-4783 Lines Gp-Hydraulic
| 10***83 | Lines Group-Hydraulic | 1 |
| 10***10 | Clamp | 2 |
| 11***91 | Hose As | 1 |
106-4875 Lines Gp-Pump
| 10***75 | Lines Group-Pump | 1 |
| 11***20 | Tube | 1 |
| 11***11 | Hose As | 1 |
166-3408 Lines Gp-Ripper
| 14***46 | Elbow, 90, -8 Orb / Orfs | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
| 16***08 | Lines Group-Ripper | 1 |
116-6244 Lines Gp-Ripper
| 11***44 | Lines Group-Ripper | 1 |
| 11***72 | Hose As | 2 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
119-6248 Lines Gp-Ripper
| 11***00 | Hose As | 1 |
| 11***91 | Hose As. | 1 |
| 11***48 | Lines Group-Ripper | 1 |
117-4653 Lines Gp-Secondary Steering
| 10***12 | Hose As | 1 |
| 10***13 | Hose As | 1 |
| 11***89 | Hose As | 1 |
106-4876 Lines Gp-Steering
| 10***76 | Lines Group-Steering | 1 |
| 10***02 | Hose As | 1 |
| 10***03 | Hose As | 1 |
8d-6185 Lock Gp-Centershift
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 0T***29 | Locking Plate,Nut A Pump Mtg Part Of Kit P/N 5r***25 | 1 |
| 1P***05 | Seal-O-Ring | 1 |
7t-6517 Manifold Gp-Control -Accumulator
| 14***58 | Valve Group-Solenoid; -Blade Lock | 1 |
| 7T***17 | Manifold Group-Control; (Solenoid) | 1 |
| 8C***62 | Manifold | 1 |
239-9894 Manifold Gp-Valve -Rh
| 23***94 | Manifold Group-Valve; -Rh | 1 |
| 24***89 | Valve Group-Shuttle | 1 |
| 24***51 | Valve Group-Control | 1 |
239-9893 Manifold Gp-Valve -Lh
| 23***93 | Manifold Group-Valve; -Lh | 1 |
| 24***89 | Valve Group-Shuttle | 1 |
| 24***51 | Valve Group-Control | 1 |
9t-5977 Motor Gp-Gerotor
| 6Y***32 | Bearing-Thrust | 1 |
| 6Y***33 | Ring-Thrust | 2 |
| 6Y***34 | Bearing-Roller | 1 |
123-8915 Pump & Motor Gp
| 11***15 | Motor Group-Electric; -Engine Prelubrication-Sec Steering, Brake Release | 1 |
| 12***14 | Pump; (Secondary Steering) | 1 |
| 12***15 | Pump & Motor Group; -Engine Prelubrication | 1 |
8x-9506 Pump & Mtg Gp-Piston
| 6E***39 | Pump Group-Piston | 1 |
| 6V***65 | Washer-Hard; (15x26x3-mm Thk) | 4 |
| 7X***50 | Bolt (5/8 X 11 X 3.50 In.) | 4 |
7i-4756 Pump & Mtg Gp-Secondary Steer
| 12***15 | Pump & Motor Group; -Engine Prelubrication | 1 |
| 7I***56 | Pump & Mtg Group-Secondary Steer; -Outside Nacd | 1 |
111-0490 Pump Gp-Metering
| 06***53 | Ring-Bearing Snap | 1 |
| 06***76 | Spacer-Drive Gear | 1 |
| 10***04 | Seal | 1 |
6e-3139 Pump Gp-Piston
| 00***69 | Cup-Roller Bearing | 1 |
| 00***71 | Cone-Bearing | 1 |
| 03***36 | Seal-O-Ring | 1 |
6e-4216 Rotating Gp-Pump
| 6E***16 | Rotating Group-Pump; -Implement, Steering | 1 |
| 6E***17 | Plate-Limiter | 2 |
| 6E***18 | Plate-Spacer | 2 |
112-6153 Steering Ar-Secondary
| 11***53 | Steering Ar-Secondary | 1 |
| 11***53 | Lines Group-Secondary Steering | 1 |
| 2A***81 | Wiring Group-Secondary Steering | 1 |
184-1527 Swashplate Gp
| 16***01 | Swashplate Stop | 2 |
| 18***27 | Swashplate Group; -Implement Pump | 1 |
| 1H***37 | Pin (Spring) | 2 |
6e-4221 Swashplate Gp
| 13***32 | Block-Stop | 2 |
| 6E***21 | Swashplate Group; -Implement Pump | 1 |
| 8F***19 | Seal (4.47 Degrees I.D.) | 2 |
9t-5604 Swivel Gp
| 2H***28 | Seal-Top Cover & Filter Group | 7 |
| 3H***07 | Seal-O-Ring; (21.82mm Id) | 4 |
| 4J***64 | Seal | 2 |
173-1011 Swivel Gp -Circle Drive
| 17***07 | Seal | 2 |
| 17***08 | Rotor | 1 |
| 17***09 | Retainer | 1 |
6e-2815 Tank & Filter Gp-Hydraulic
| 08***07 | Pin | 1 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 8 |
214-1984 Tank & Filter Gp-Hydraulic
| 08***07 | Pin | 1 |
| 14***61 | Spacer; (20x128x6-mm Thk) | 1 |
| 1L***72 | Dowel (Part Of 8s***99 Assem.) | 1 |
8x-5290 Tank & Mtg Gp-Hydraulic
| 5P***75 | Washer-Hard; (10.2x22.5x3-mm Thk)(Shield To A/C) | 8 |
| 5P***24 | Bolt-Plt; (1/2unc X 2 1/4) | 2 |
| 5P***00 | Key Total 2 Pieces Per Unit; (Literature Compartment) | 1 |
214-1983 Tank & Mtg Gp-Hydraulic
| 21***83 | Tank & Mtg Group-Hydraulic | 1 |
| 21***84 | Tank & Filter Group-Hydraulic | 1 |
| 4D***94 | Clip-- Compressor Clutch Wire To Compressor Body | 3 |
112-2240 Manifold Gp-Control
| 11***40 | Valve & Mounting Group; -Blade Cushion | 1 |
| 14***10 | Valve Group-Solenoid; -Axle Oil Cooler-Hydraulic Lockout | 1 |
| 8C***62 | Manifold | 1 |
124-4197 Valve & Linkage Gp -Bank 4 Rh-Bank 5 Lh-Eu
| 10***57 | Lever; (Plow, Bulldozer Angle) | 2 |
| 10***58 | Lever; (Plow & Bulldozer Lift) | 1 |
| 10***19 | Plate As; (Rh) | 1 |
144-4004 Valve & Linkage Gp -Bank 5 Rh-Bank 7 Lh-Wing Tilt Float
| 10***57 | Lever; (Plow, Bulldozer Angle) | 2 |
| 10***58 | Lever; (Plow & Bulldozer Lift) | 3 |
| 10***97 | Lever; (Plow, Bulldozer Angle) | 1 |
254-0240 Valve & Linkage Gp
| 10***57 | Lever; (Plow, Bulldozer Angle) | 2 |
| 10***58 | Lever; (Plow & Bulldozer Lift) | 2 |
| 10***97 | Lever; (Plow, Bulldozer Angle) | 2 |
8x-5490 Valve & Linkage Gp -Bank 4-Rh, Lh
| 10***57 | Lever; (Plow, Bulldozer Angle) | 1 |
| 10***58 | Lever; (Plow & Bulldozer Lift) | 1 |
| 10***19 | Plate As; (Rh) | 1 |
7i-4871 Valve & Linkage Gp -Bank 4 Rh-Bank 5 Lh
| 10***57 | Lever; (Plow, Bulldozer Angle) | 2 |
| 10***58 | Lever; (Plow & Bulldozer Lift) | 1 |
| 10***19 | Plate As; (Rh) | 1 |
124-4198 Valve & Linkage Gp -Bank 5-Lh-Rh-Eu
| 10***57 | Lever; (Plow, Bulldozer Angle) | 2 |
| 10***58 | Lever; (Plow & Bulldozer Lift) | 2 |
| 10***19 | Plate As; (Rh) | 1 |
7i-4870 Valve & Linkage Gp -Bank 5-Lh-Rh
| 10***57 | Lever; (Plow, Bulldozer Angle) | 2 |
| 10***58 | Lever; (Plow & Bulldozer Lift) | 2 |
| 10***19 | Plate As; (Rh) | 1 |
107-9662 Valve & Linkage Gp -Bank 5 Rh-Bank 7 Lh-Wing Tilt
| 10***57 | Lever; (Plow, Bulldozer Angle) | 2 |
| 10***58 | Lever; (Plow & Bulldozer Lift) | 3 |
| 10***97 | Lever; (Plow, Bulldozer Angle) | 1 |
124-4200 Valve & Linkage Gp -Bank 5 Rh-Bank 7 Lh-Eu
| 10***57 | Lever; (Plow, Bulldozer Angle) | 2 |
| 10***58 | Lever; (Plow & Bulldozer Lift) | 3 |
| 10***97 | Lever; (Plow, Bulldozer Angle) | 1 |
124-4196 Valve & Linkage Gp -Bank 4-Rh-Lh-Eu
| 10***57 | Lever; (Plow, Bulldozer Angle) | 1 |
| 10***58 | Lever; (Plow & Bulldozer Lift) | 1 |
| 10***19 | Plate As; (Rh) | 1 |
254-0242 Valve & Linkage Gp
| 10***57 | Lever; (Plow, Bulldozer Angle) | 2 |
| 10***58 | Lever; (Plow & Bulldozer Lift) | 3 |
| 10***97 | Lever; (Plow, Bulldozer Angle) | 2 |
2p-4548 Valve Gp-Control
| 1P***74 | Pin-Valve Spring | 1 |
| 2P***48 | Valve As | 1 |
| 3H***56 | Pin | 1 |
124-3336 Valve Gp-Bank 4
| 10***09 | Seal-Integral, . Gear; Ring | 5 |
| 10***46 | Cover | 1 |
| 10***85 | Manifold | 1 |
130-3125 Valve Gp-Bank 4 -Lh-Eu
| 10***09 | Seal-Integral, . Gear; Ring | 5 |
| 10***46 | Cover | 1 |
| 10***85 | Manifold | 1 |
104-8653 Valve Gp-Bank 4 -Lh
| 10***09 | Seal-Integral, . Gear; Ring | 5 |
| 10***46 | Cover | 1 |
| 10***85 | Manifold | 1 |
104-8674 Valve Gp-Bank 4 -Rh
| 10***09 | Seal-Integral, . Gear; Ring | 5 |
| 10***46 | Cover | 1 |
| 10***38 | Manifold | 1 |
124-3339 Valve Gp-Bank 4
| 10***09 | Seal-Integral, . Gear; Ring | 5 |
| 10***46 | Cover | 1 |
| 10***38 | Manifold | 1 |
130-3128 Valve Gp-Bank 4 -Rh-Eu
| 10***09 | Seal-Integral, . Gear; Ring | 5 |
| 10***46 | Cover | 1 |
| 10***38 | Manifold | 1 |
104-8654 Valve Gp-Bank 5 -Lh
| 10***09 | Seal-Integral, . Gear; Ring | 6 |
| 10***46 | Cover | 1 |
| 10***85 | Manifold | 1 |
124-3337 Valve Gp-Bank 5
| 10***09 | Seal-Integral, . Gear; Ring | 6 |
| 10***46 | Cover | 1 |
| 10***85 | Manifold | 1 |
104-8675 Valve Gp-Bank 5 -Rh
| 10***09 | Seal-Integral, . Gear; Ring | 6 |
| 10***46 | Cover | 1 |
| 10***38 | Manifold | 1 |
124-3340 Valve Gp-Bank 5
| 10***09 | Seal-Integral, . Gear; Ring | 6 |
| 10***46 | Cover | 1 |
| 10***38 | Manifold | 1 |
130-3126 Valve Gp-Bank 5 -Lh-Eu
| 10***09 | Seal-Integral, . Gear; Ring | 6 |
| 10***46 | Cover | 1 |
| 10***85 | Manifold | 1 |
130-3132 Valve Gp-Bank 5 -Rh-Eu
| 10***09 | Seal-Integral, . Gear; Ring | 6 |
| 10***46 | Cover | 1 |
| 10***38 | Manifold | 1 |
254-1589 Valve Gp-Bank 6 -Lh
| 10***09 | Seal-Integral, . Gear; Ring | 7 |
| 10***85 | Manifold | 1 |
| 10***54 | Valve Group-Control; -Blade Tilt | 1 |
254-1587 Valve Gp-Bank 6 -Rh
| 10***09 | Seal-Integral, . Gear; Ring | 7 |
| 10***38 | Manifold | 1 |
| 10***47 | Valve Group-Control; -Bulldozer Lift, Plow | 1 |
254-1590 Valve Gp-Bank 6 -Rh
| 10***09 | Seal-Integral, . Gear; Ring | 7 |
| 10***38 | Manifold | 1 |
| 10***47 | Valve Group-Control; -Bulldozer Lift, Plow | 1 |
4z-6358 Valve Gp-Bank 7 -Lh-Float Tilt
| 10***09 | Seal-Integral, . Gear; Ring | 8 |
| 10***46 | Cover | 1 |
| 10***85 | Manifold | 1 |
124-3338 Valve Gp-Bank 7
| 10***09 | Seal-Integral, . Gear; Ring | 8 |
| 10***46 | Cover | 1 |
| 10***85 | Manifold | 1 |
130-3127 Valve Gp-Bank 7 -Lh-Eu
| 10***09 | Seal-Integral, . Gear; Ring | 8 |
| 10***46 | Cover | 1 |
| 10***85 | Manifold | 1 |
104-8656 Valve Gp-Bank 7 -Lh
| 10***09 | Seal-Integral, . Gear; Ring | 8 |
| 10***46 | Cover | 1 |
| 10***85 | Manifold | 1 |
254-1579 Valve Gp-Bank 7 -Lh
| 10***09 | Seal-Integral, . Gear; Ring | 8 |
| 10***85 | Manifold | 1 |
| 10***54 | Valve Group-Control; -Blade Tilt | 1 |
6e-2866 Valve Gp-Combination
| 3P***98 | Plug-Orifice | 1 |
| 6E***66 | Valve Group-Combination | 1 |
| 8J***15 | Plug 1.5 mm(.0625 In.) Thread | 2 |
9t-5957 Valve Gp-Combination
| 10***21 | Valve Group-Relief; -Direct Operated | 1 |
| 13***50 | Valve Group-Purge; -Hydraulic Steering-Implement Signal | 1 |
| 14***08 | Plug As. | 3 |
107-0547 Valve Gp-Control -Bulldozer Lift, Plow
| 10***47 | Stem | 1 |
| 10***70 | Lever As; (Blade Lift) | 1 |
| 10***71 | Lever; (Blade Lift) | 1 |
153-8907 Valve Gp-Control -Bulldozer Lift, Plow, Lh
| 10***47 | Stem | 1 |
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***72 | Detent | 1 |
107-0549 Valve Gp-Control -Wing Lift-Lh
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
| 10***78 | Cover | 1 |
115-1007 Valve Gp-Control -Bulldozer Angle, Plow, Rh
| 10***70 | Lever As; (Blade Lift) | 1 |
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
107-0560 Valve Gp-Control -Articulation
| 10***70 | Lever As; (Blade Lift) | 1 |
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
107-0556 Valve Gp-Control -Sideshift
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
| 10***78 | Cover | 1 |
130-3112 Valve Gp-Control -Blade Lift
| 10***70 | Lever As; (Blade Lift) | 1 |
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
107-0552 Valve Gp-Control -Wing Tilt-Lh
| 10***29 | Plug | 1 |
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
107-0554 Valve Gp-Control -Blade Tilt
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
| 10***78 | Cover | 1 |
107-0561 Valve Gp-Control -Centershift
| 10***70 | Lever As; (Blade Lift) | 1 |
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
124-3455 Valve Gp-Control -Ripper-Lh
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
| 10***78 | Cover | 1 |
107-0555 Valve Gp-Control -Circle Drive
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
| 10***78 | Cover | 1 |
6e-3030 Valve Gp-Control -Wheel Lean
| 10***54 | Stem | 1 |
| 10***70 | Lever As; (Blade Lift) | 1 |
| 10***71 | Lever; (Blade Lift) | 1 |
107-0564 Valve Gp-Control -Blade Lift
| 10***70 | Lever As; (Blade Lift) | 1 |
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
119-9553 Valve Gp-Control -Wing Lift-Lh
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
| 10***78 | Cover | 1 |
124-3332 Valve Gp-Control
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
| 10***78 | Cover | 1 |
107-0557 Valve Gp-Control -Blade Lift-Lh
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***72 | Detent | 1 |
| 10***73 | Retainer | 4 |
130-3111 Valve Gp-Control -Bulldozer Lift, Plow, Rh
| 10***47 | Stem | 1 |
| 10***70 | Lever As; (Blade Lift) | 1 |
| 10***71 | Lever; (Blade Lift) | 1 |
130-3113 Valve Gp-Control -Blade Lift-Lh-Eu
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
| 10***82 | Lever As; (Blade Lift) | 1 |
137-8104 Valve Gp-Control -Wing Tilt, Lh
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
| 10***78 | Cover | 1 |
153-8905 Valve Gp-Control -Wing Lift, Rh
| 10***70 | Lever As; (Blade Lift) | 1 |
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
124-3333 Valve Gp-Control
| 10***70 | Lever As; (Blade Lift) | 1 |
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
150-6649 Valve Gp-Control -Wing Lift, Lh
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
| 10***78 | Cover | 1 |
137-8106 Valve Gp-Control -Wing Lift, Lh
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
| 10***78 | Cover | 1 |
107-0559 Valve Gp-Control -Ripper-Lh
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
| 10***78 | Cover | 1 |
119-9551 Valve Gp-Control -Plow/Dozer Lift-Rh
| 10***70 | Lever As; (Blade Lift) | 1 |
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
104-3122 Valve Gp-Pump Control -Pressure, Flow Compensator
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 03***36 | Seal-O-Ring | 1 |
| 10***22 | Valve Group-Pump Control; -Pressure, Flow Compensator-Implement, Steering | 1 |
131-8350 Valve Gp-Purge
| 10***44 | Valve | 1 |
| 13***70 | Sleeve | 1 |
| 13***50 | Valve Group-Purge; -Hydraulic Steering-Implement Signal | 1 |
129-1054 Valve Gp-Purge
| 12***47 | Plug | 1 |
| 12***52 | Valve | 1 |
| 12***54 | Valve Group-Purge | 1 |
106-7389 Valve Gp-Relief -Hydraulic
| 10***89 | Valve Group-Relief; -Blade Tip, Ripper, Sideshift | 1 |
| 11***35 | Retainer As | 1 |
| 13***77 | Valve | 1 |
139-8476 Valve Gp-Relief
| 13***77 | Valve | 1 |
| 13***76 | Valve Group-Relief | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
139-8474 Valve Gp-Relief
| 11***35 | Retainer As | 1 |
| 13***77 | Valve | 1 |
| 13***74 | Valve Group-Relief; -Lift | 1 |
101-4148 Valve Gp-Relief
| 10***48 | Valve Group-Relief; -Blade Tip, Ripper, Sideshift | 1 |
| 3G***26 | Nut; (3/8-40-Thd) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
116-0375 Valve Gp-Relief
| 11***75 | Valve Group-Relief; -Direct Operated | 1 |
| 13***77 | Valve | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
115-1375 Valve Gp-Relief -Main
| 11***24 | Body-Relief Valve | 1 |
| 11***75 | Valve Group-Relief; -Main | 1 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 10 |
101-4147 Valve Gp-Relief
| 10***47 | Valve Group-Relief; -Blade Tip-Ripper-Sideshift | 1 |
| 10***48 | Valve Group-Relief; -Blade Tip, Ripper, Sideshift | 1 |
| 10***89 | Valve Group-Relief; -Blade Tip, Ripper, Sideshift | 1 |
6e-4704 Valve Gp-Relief
| 3G***26 | Nut; (3/8-40-Thd) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 4D***97 | Seal 15.6 mm(.614 In.) I.D. | 1 |
100-6021 Valve Gp-Relief
| 10***21 | Valve Group-Relief; -Direct Operated | 1 |
| 10***57 | Valve | 1 |
| 12***61 | Housing | 1 |
116-0374 Valve Gp-Relief
| 11***74 | Valve Group-Relief; -Direct Operated | 1 |
| 13***77 | Valve | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
6e-3033 Valve Gp-Relief -Plow/Dozer Lift
| 10***90 | Valve Group-Relief; -Blade Lift | 1 |
| 6E***33 | Valve Group-Relief; -Plow/Dozer Lift-Blade Lift | 1 |
| 6E***04 | Valve Group-Relief; -Blade Lift | 1 |
106-7390 Valve Gp-Relief
| 10***90 | Valve Group-Relief; -Blade Lift | 1 |
| 11***35 | Retainer As | 1 |
| 13***77 | Valve | 1 |
139-8477 Valve Gp-Relief
| 13***77 | Valve | 1 |
| 13***77 | Valve Group-Relief | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
222-7774 Valve Gp-Relief
| 11***35 | Retainer As | 1 |
| 13***77 | Valve | 1 |
| 22***74 | Valve Group-Relief; -Bulldozer Lift, Plow | 1 |
4t-4935 Valve Gp-Relief
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
| 4T***35 | Valve Group-Relief; -Main-Implement Inlet Manifiold | 1 |
| 4T***42 | Spring | 1 |
6e-4703 Valve Gp-Relief
| 3G***26 | Nut; (3/8-40-Thd) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 4D***97 | Seal 15.6 mm(.614 In.) I.D. | 1 |
9t-6129 Valve Gp-Relief
| 1N***02 | Seal Plug On Manifold Assembly | 4 |
| 3G***44 | Valve; (Crossover Steering) | 2 |
| 3G***92 | Shim .13 mm(.005 In.) Thick | 2 |
139-8472 Valve Gp-Relief
| 11***35 | Retainer As | 1 |
| 13***77 | Valve | 1 |
| 13***72 | Valve Group-Relief; -Ripper | 1 |
139-8475 Valve Gp-Relief
| 13***77 | Valve | 1 |
| 13***75 | Valve Group-Relief | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
4t-1860 Valve Gp-Shuttle
| 14***03 | Seal-O-Ring | 1 |
| 14***04 | Ring-Backup | 2 |
| 14***05 | Ring-Backup | 2 |
Implements
6g-4970 Circle Gp
| 10***38 | Plate | 8 |
| 1K***72 | Locknut Horn To Guard | 12 |
| 25***34 | Bracket As | 1 |
6g-4985 Drawbar Gp
| 0S***27 | Bolt -114.30 mm(4.50 In.) Long | 8 |
| 12***54 | Strip-Wear | 10 |
| 12***55 | Strip-Wear | 6 |
8x-6420 Plate Gp-Push
| 2A***20 | Bolt 12.1 cm (4.75 In.) Long | 8 |
| 2J***07 | Nut-Full; (1-8 X38.1 Thd) | 8 |
| 3V***05 | Washer | 16 |
Lubrication System
8n-4457 Base Gp-Oil Filter
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 2 |
| 1B***90 | Bolt; (5/16-18x1.375-In)(Rh Front Cover) | 2 |
| 1P***67 | Plunger; (Engine Oil Cooler Relief Valve) | 2 |
4p-7096 Base Gp-Oil Filter
| 03***51 | Elbow )-Inlet Port To Valve Group | 1 |
| 1B***90 | Bolt; (5/16-18x1.375-In)(Rh Front Cover) | 2 |
| 1B***75 | Bolt (" " " ); Bolt ( " " " ) | 1 |
147-3092 Base Gp-Oil Filter
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 8 |
| 13***75 | Cover-Filter Base | 1 |
| 14***82 | Cover-Filter Base | 1 |
1p-4244 Breather Gp
| 1P***44 | Breather Group | 1 |
| 2W***62 | Breather As-Crankcase; (Engine) | 1 |
| 3H***43 | Bolt,Machine Breather Assembly To Cover | 1 |
2p-6855 Filler Gp-Engine Oil
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 2 |
| 2A***11 | Washer; (5.5x12.3x0.8-mm Thk) | 1 |
| 2P***19 | Pipe-Oil Filler | 1 |
147-3091 Filter Gp-Engine Oil
| 03***50 | Elbow (Check Valve Drain Tube) | 1 |
| 14***83 | Hose As | 1 |
| 14***84 | Hose As | 1 |
8n-7254 Fumes Disposal Gp
| 1N***24 | Tube | 1 |
| 1N***02 | Hose 8.00 cm(3.15 In.) | 1 |
| 4L***37 | Hex Head Capscrew, 3/8 Nc X 1 1/2 In. (38 mm) | 1 |
115-7542 Gauge Gp-Oil Level (Dipstick) -Engine
| 11***42 | Gage Group-Oil Level; -Engine | 1 |
| 2P***97 | Tube A Oil Level Gage | 1 |
| 4P***28 | Tube Assembly | 1 |
2p-6493 Gauge Gp-Oil Level (Dipstick) -Engine
| 2P***47 | Filler Neck Oil Gage | 1 |
| 2P***97 | Tube A Oil Level Gage | 1 |
| 2P***93 | Gauge Group-Oil Level (Dipstick); -Engine | 1 |
2p-6105 Lines Gp-Engine Oil
| 0L***64 | Lock --To Reverse Driven Gear Splash Pan; -- To Reverse Driven Gear Splash Pan | 2 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 1 |
147-2070 Lines Gp-Turbocharger Oil
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 0S***08 | Bolt-Support To Starting Engine Timing Gear Housing | 1 |
7e-5683 Lines Gp-Turbocharger Oil
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 0S***08 | Bolt-Support To Starting Engine Timing Gear Housing | 1 |
139-9609 Mounting Gp-Engine Oil Filter
| 13***09 | Mounting Group-Engine Oil Filter | 1 |
| 4L***37 | Hex Head Capscrew, 3/8 Nc X 1 1/2 In. (38 mm) | 3 |
| 8T***96 | Washer-Hard- Line From Pipe As. To Gear | 3 |
2g-3000 Oil Change Gp-High Speed
| 00***01 | Elbow (To Serial No 1md225) | 1 |
| 00***63 | Elbow, 90 Deg Street, 3/4in. N.P.T. | 1 |
| 03***37 | Hose Assem. .43 M(17 In.) | 1 |
6i-1346 Pump Gp-Engine Oil
| 0T***65 | Bolt--3/8" X 3 1/2"--Use As Required; Bolt 5t***56 Plate To Cover Gp 4n***72 | 3 |
| 1B***09 | Key,Woodruff No. 10 Oil Pump | 1 |
| 1F***06 | Dowel | 1 |
2p-1784 Pump Gp-Engine Oil
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 3 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 1 |
| 2P***84 | Pump Group-Engine Oil; Engine Oil Pump Group | 1 |
106-8957 Pump Gp-Engine Oil
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 3 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 1 |
| 10***57 | Pump Group-Engine Oil | 1 |
6n-2642 Pump Gp-Engine Oil
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 1 |
| 1P***46 | Washer-Hard; (10.2x35x6-mm Thk) | 1 |
| 6I***46 | Pump Group-Engine Oil | 1 |
106-8958 Pump Gp-Engine Oil
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 1 |
| 10***58 | Pump Group-Engine Oil | 1 |
| 1P***46 | Washer-Hard; (10.2x35x6-mm Thk) | 1 |
Machine Arrangement
8x-5040 Chassis Ar
| 10***36 | Enclosure Group-Engine | 1 |
| 10***75 | Lines Group-Pump | 1 |
| 10***76 | Lines Group-Steering | 1 |
8x-5030 General Ar
| 11***61 | Engine Ar | 1 |
| 14***46 | Engine Ar | 1 |
| 7E***41 | Installation Ar-Engine | 1 |
114-4678 Option Ar-Eu
| 10***10 | Wiring Group-Power Receptacle | 1 |
| 11***53 | Steering Ar-Secondary | 1 |
| 11***78 | Option Ar-Eu | 1 |
152-3845 Snow Ar-Motor Grader
| 10***68 | Heater Ar-Cab | 1 |
| 11***47 | Air Dryer Group | 1 |
| 11***37 | Lighting Ar-Flood | 1 |
152-3840 Snow Ar-Motor Grader
| 11***47 | Air Dryer Group | 1 |
| 11***37 | Lighting Ar-Flood | 1 |
| 12***58 | Mirror Group-Rear View; -Exterior | 1 |
Operator Station
142-0742 Accessory Gp-Cab
| 11***11 | Socket-Auxiliary Power; (12-Volt)(Power Port) | 1 |
| 12***78 | Locknut; (M6x1-Thd) | 2 |
| 13***65 | Plate | 1 |
142-0747 Accessory Gp-Cab
| 11***11 | Socket-Auxiliary Power; (12-Volt)(Power Port) | 1 |
| 12***78 | Locknut; (M6x1-Thd) | 2 |
| 13***53 | Plate | 1 |
173-1028 Adjuster Gp-Seat
| 11***86 | Anchor | 1 |
| 11***92 | Rod | 1 |
| 13***38 | Washer-Plastic; (13x31.7x0.8-mm Thk) | 2 |
237-3970 Air Compressor Gp-Seat
| 23***70 | Air Compressor Group-Seat | 1 |
8w-7646 Air Conditioner & Mounting Gp
| 12***71 | Pad; (420mm X 356mm) | 1 |
| 12***72 | Pad; (1035mm X 150mm) | 1 |
| 8C***88 | Air Conditioner Group | 1 |
110-9471 Air Conditioner Ar
| 11***71 | Air Conditioner Ar | 1 |
| 11***97 | Lines Group-Air Conditioner | 1 |
| 14***52 | Film-Identification; (Fuse)(A/C) | 1 |
8x-6740 Air Conditioner Ar
| 7E***10 | Compressor Group-Refrigerant | 1 |
| 7I***15 | Duct Group-Cab Air; -Air Conditioner, Heater | 1 |
| 8W***33 | Condenser & Mtg Group-Refrigerant | 1 |
8c-9788 Air Conditioner Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 8 |
| 10***40 | Cover | 1 |
202-7666 Armrest Gp -Rh
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 1 |
| 16***14 | Bracket As | 1 |
| 1F***50 | Nut Rops Support | 1 |
202-7668 Armrest Gp -Lh
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 1 |
| 16***13 | Bracket As | 1 |
| 1F***50 | Nut Rops Support | 1 |
113-4242 Armrest Gp -Lh
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 11***40 | Bracket As-Lh | 1 |
| 11***42 | Armrest Group; -Lh | 1 |
113-4245 Armrest Gp -Rh
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 11***43 | Bracket As-Rh | 1 |
| 11***45 | Armrest Group; -Rh | 1 |
134-3997 Compressor Gp-Refrigerant
| 13***97 | Compressor Group-Refrigerant | 1 |
| 3E***58 | Compressor Group-Refrigerant | 1 |
| 7T***32 | Plug Assem.; (3/8-24) | 1 |
7e-9710 Compressor Gp-Refrigerant
| 10***59 | Compressor Group-Refrigerant | 1 |
| 10***27 | Bracket | 2 |
| 1K***49 | Spacer Alternator To Brackets | 1 |
3e-1906 Compressor Gp-Refrigerant
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***39 | Pin-Connector; (14-Ga To 18-Ga)(For 14 Gauge Wire) | 2 |
| 31***18 | Valve As-Pressure Relief; (Refrigerant Compressor) | 1 |
101-1759 Compressor Gp-Refrigerant
| 10***59 | Compressor Group-Refrigerant | 1 |
| 10***47 | Coil Assem. | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
8w-6333 Condenser & Mtg Gp-Refrigerant
| 10***20 | Spacer; (10.5x25x20-mm Thk) | 4 |
| 21***18 | Core As-Condenser | 1 |
| 5P***75 | Washer-Hard; (10.2x22.5x3-mm Thk)(Shield To A/C) | 4 |
8x-7992 Condenser & Mtg Gp-Refrigerant
| 10***19 | Condenser Group-Refrigerant | 1 |
| 4V***48 | Boss-Threaded; (3/8-16 Thd) | 2 |
| 5M***62 | Bolt; (3/8-16x0.75-In) | 1 |
103-8519 Condenser Gp-Refrigerant
| 10***19 | Condenser Group-Refrigerant | 1 |
| 12***30 | Harness As-Heater & Air Cond | 1 |
| 12***83 | Plate | 2 |
8x-2330 Console Gp-Operator
| 03***35 | Bolt-Self Locking; 2.22cm(.875 In.) Lg | 1 |
| 03***66 | Rod | 1 |
| 03***94 | Pin | 1 |
8x-4000 Control Gp-Clutch
| 11***61 | Cable As | 1 |
| 12***73 | Bolt-12 Point Head; (3/8-16x1.25-In)(3/8-16thd) | 1 |
| 16***21 | Rod End-Yoke; (3/8-24 Lh-Thd) | 1 |
152-7903 Control Gp-Hydraulic Lockout
| 09***18 | Setscrew-Socket; (M4x0.7x6-mm) | 12 |
| 10***14 | Knob | 4 |
| 15***30 | Block | 4 |
7i-4719 Control Gp-Steering
| 09***00 | Steering Wheel | 1 |
| 11***73 | Bolt-12 Point Head; (M10x1.5x35-mm) | 4 |
| 14***95 | Nut; (13/16-20-Thd) | 1 |
8x-3645 Control Gp-Transmission
| 09***90 | Ring-Retaining | 1 |
| 10***82 | Gate As | 1 |
| 10***04 | Bracket As | 1 |
8x-4153 Conversion Ar-Non-Rops
| 12***75 | Panel Group-Cab; -Instrument | 1 |
| 3V***94 | Plug-Button | 1 |
| 5P***00 | Key Total 2 Pieces Per Unit; (Literature Compartment) | 1 |
8x-4317 Door Gp-Cab -Rh
| 10***41 | Plate As | 1 |
| 10***50 | Latch As-Rh | 1 |
| 10***52 | Link-Tag-Rh | 1 |
8x-4525 Door Gp-Cab -Rh
| 06***88 | Seal; (Use As Required) | 0 |
| 10***41 | Plate As | 1 |
| 10***50 | Latch As-Rh | 1 |
8x-4318 Door Gp-Cab -Lh
| 10***41 | Plate As | 1 |
| 10***49 | Latch As; (Lh) | 1 |
| 10***51 | Link-Tag-Lh | 1 |
8x-4413 Door Gp-Cab -High Profile
| 10***53 | Bumper-Conical | 4 |
| 10***13 | Plate As | 2 |
| 12***28 | Seal; (17.2-cm Each) | 0 |
8x-4527 Door Gp-Cab -Low Profile
| 10***53 | Bumper-Conical | 4 |
| 10***13 | Plate As | 2 |
| 12***28 | Seal; (17.2-cm Each) | 0 |
8x-4526 Door Gp-Cab -Lh
| 06***88 | Seal; (Use As Required) | 0 |
| 10***41 | Plate As | 1 |
| 10***49 | Latch As; (Lh) | 1 |
8w-7653 Duct & Control Gp -Heater/Air Conditioner
| 13***95 | Panel As | 1 |
| 7K***01 | Nut-Speed; (44.5mm Oal) | 2 |
| 8S***66 | Pop-Rivet (.125 Dia.) | 4 |
7i-5015 Duct Gp-Cab Air -Air Conditioner, Heater
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 8 |
| 10***96 | Bracket As | 6 |
| 12***54 | Duct | 1 |
8y-5959 Extension Gp-Backrest -Vinyl
| 8Y***77 | Pan As-Extension | 1 |
| 8Y***47 | Fastener | 2 |
| 8Y***59 | Extension Group-Backrest | 1 |
8y-5874 Extension Gp-Backrest -Cloth
| 8Y***74 | Extension Group-Backrest; Backrest Extension Group | 1 |
| 8Y***77 | Pan As-Extension | 1 |
| 8Y***43 | Cushion Kit; (Consists Of Fastener, Cushion Assem.) | 1 |
170-5334 Fan Gp-Circulating
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 1 |
| 13***79 | Bracket | 1 |
| 17***34 | Fan Group-Circulating; -Defrost | 1 |
8x-2245 Fan Gp-Circulating
| 3E***21 | Actuator-Rocker; (Defroster) | 1 |
| 3E***25 | Lamp; (24-Volt) | 1 |
| 3E***30 | Switch As; (Window Wiper) | 1 |
192-0759 Fan Gp-Circulating
| 13***78 | Fan Group-Circulating; -Front Defroster | 1 |
| 14***87 | Harness As-Motor; (Circulating Fan) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
8x-2920 Fan Gp-Circulating
| 3E***21 | Actuator-Rocker; (Defroster) | 1 |
| 3E***25 | Lamp; (24-Volt) | 1 |
| 3E***30 | Switch As; (Window Wiper) | 1 |
135-1978 Fan Gp-Circulating
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 1 |
| 13***78 | Fan Group-Circulating; -Front Defroster | 1 |
| 13***79 | Bracket | 1 |
9x-9657 Fan Gp-Circulating
| 1B***13 | Bolt,Machine Governor And Decelerator Control | 1 |
| 1M***30 | Nut And Lock Assem.; (No. 10-32) | 2 |
| 2D***35 | Locknut (Visor To Bracket) | 1 |
8x-2925 Filter Gp-Cab Air
| 11***55 | Spring-Filter | 4 |
| 13***92 | Retainer-Captive | 2 |
| 23***86 | Filter Element As-Cab Air; (Cab) | 1 |
133-5377 Guard Gp-Vandalism
| 13***77 | Guard Group-Vandalism | 1 |
| 13***84 | Plate As | 1 |
| 13***87 | Plate As | 1 |
8w-7651 Heater & Mtg Gp-Cab
| 12***71 | Pad; (420mm X 356mm) | 1 |
| 12***72 | Pad; (1035mm X 150mm) | 1 |
| 8C***87 | Heater Group-Cab | 1 |
102-7368 Heater Ar-Cab
| 10***68 | Heater Ar-Cab | 1 |
| 7I***15 | Duct Group-Cab Air; -Air Conditioner, Heater | 1 |
| 8W***51 | Heater & Mtg Group-Cab | 1 |
8c-9787 Heater Gp-Cab
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 8 |
| 10***40 | Cover | 1 |
9d-4049 Horn Gp-Air
| 2G***64 | Kit-Diaphragm; (Air Horn) | 2 |
| 4B***75 | Washer (1.75 In. Outside Diameter) | 1 |
| 5D***93 | Projector (Right Hand) | 1 |
5d-6998 Horn Gp-Air
| 15***87 | Cover | 2 |
| 2G***64 | Kit-Diaphragm; (Air Horn) | 2 |
| 4B***75 | Washer (1.75 In. Outside Diameter) | 1 |
132-2115 Horn Gp-Air
| 00***84 | Spring-Horn | 4 |
| 00***85 | Brush-Horn | 4 |
| 09***71 | Seal-Horn Button | 1 |
8x-9440 Horn Gp-Air
| 00***84 | Spring-Horn | 4 |
| 00***85 | Brush-Horn | 4 |
| 09***71 | Seal-Horn Button | 1 |
113-5808 Housing Gp-Seat Suspension
| 09***78 | Pin-Spring | 1 |
| 10***24 | Kit-Indicator; (Weight Adjustment)(Suspension Seat) | 1 |
| 10***79 | Kit-Bumper; (Weight Adjustment)(Suspension Seat) | 1 |
2a-7344 Installation Ar-Radio
| 2A***44 | Installation Ar-Radio | 1 |
| 2A***46 | Converter Group-Electrical | 1 |
| 8X***10 | Installation Group-Radio | 1 |
145-1300 Installation Ar-Radio
| 13***32 | Installation Group-Radio | 1 |
| 14***97 | Converter Group-Electrical; -Radio | 1 |
| 14***00 | Installation Ar-Radio | 1 |
130-9921 Installation Ar-Radio
| 13***32 | Installation Group-Radio | 1 |
| 13***21 | Installation Ar-Radio | 1 |
| 2A***46 | Converter Group-Electrical | 1 |
8x-9410 Installation Gp-Radio
| 10***01 | Nut-Clip | 8 |
| 12***54 | Plate As | 2 |
| 2A***84 | Bracket | 1 |
130-9432 Installation Gp-Radio
| 13***32 | Installation Group-Radio | 1 |
| 2A***84 | Bracket | 1 |
| 2G***67 | Washer; (10.5x60x3-mm Thk) | 1 |
8w-5927 Insulation Gp-Weather
| 11***64 | Boot | 14 |
| 4M***81 | Capscrew; (Hex Hd 1/4-20x3/4) (Use W/Spacer 2) | 4 |
| 5P***75 | Washer-Hard; (10.2x22.5x3-mm Thk)(Shield To A/C) | 4 |
8x-2400 Liner Gp-Cab
| 10***55 | Cover-Speaker | 2 |
| 10***25 | Screw-Machine; (8-32x1-In) | 8 |
| 10***14 | Knob | 4 |
8x-2405 Liner Gp-Cab
| 10***55 | Cover-Speaker | 2 |
| 10***25 | Screw-Machine; (8-32x1-In) | 8 |
| 10***14 | Knob | 4 |
115-8497 Lines Gp-Air Conditioner
| 03***48 | Clip; (11.11mm .437in Id) | 2 |
| 08***91 | Bolt; (M10x1.5x55-mm) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
8x-6739 Lines Gp-Air Conditioner
| 08***91 | Bolt; (M10x1.5x55-mm) | 1 |
| 10***00 | Fitting As-Air Conditioner; (Quick Disconnect)(Refrigerant) | 2 |
| 10***77 | Hose As | 1 |
8x-7993 Lines Gp-Air Conditioner
| 15***44 | Cover-Air Conditioner Lines | 1 |
| 15***46 | Cover-Air Conditioner Lines | 1 |
| 15***50 | Cover-Air Conditioner Lines | 1 |
8x-5310 Lines Gp-Heater
| 2Y***81 | Button; (39.69mm Dia) | 1 |
| 4S***62 | Clip 25.4mm(1 In.)Width | 2 |
| 5D***26 | Clamp-Band; (9/16 To 1 1/16) | 4 |
6v-1970 Literature Gp
| 5P***58 | Sleeve; (Cable Splice) | 1 |
| 5P***00 | Key Total 2 Pieces Per Unit; (Literature Compartment) | 2 |
| 6V***70 | Literature Group; (Literature Compartment) | 1 |
140-8127 Mirror Gp-Rear View -Dual, Interior
| 14***18 | Bracket As | 2 |
| 14***27 | Mirror Group-Rear View; -Dual, Interior | 1 |
| 1F***50 | Nut Rops Support | 1 |
123-4358 Mirror Gp-Rear View
| 11***18 | Arm | 2 |
| 12***58 | Mirror Group-Rear View; -Exterior | 1 |
| 12***86 | Block | 4 |
8x-2795 Mirror Gp-Rear View -Inside
| 1P***78 | Cap | 2 |
| 2G***41 | Clamp | 2 |
| 2G***42 | Arm | 2 |
159-0241 Module Gp-Quad Gauge
| 11***86 | Track Group | 1 |
| 14***15 | Indicator As-Articulation | 1 |
| 15***40 | Indicator As-Fuel Level | 1 |
149-5927 Module Gp-Quad Gauge
| 12***98 | Indicator As-Fuel Level | 1 |
| 12***15 | Voltmeter Group; (Instrument Panel) | 1 |
| 14***15 | Indicator As-Articulation | 1 |
124-0384 Module Gp-Quad Gauge
| 11***86 | Track Group | 1 |
| 12***84 | Module Group-Quad Gauge | 1 |
| 12***95 | Indicator As-Articulation | 1 |
187-1051 Module Gp-Quad Gauge
| 11***86 | Track Group | 1 |
| 18***33 | Voltmeter Group; (Quad Gauge Module) | 1 |
| 18***34 | Indicator As-Articulation; (Articulation) | 1 |
2a-6985 Mounting Gp-Rops -Enclosed
| 03***35 | Bolt-Self Locking; 2.22cm(.875 In.) Lg | 2 |
| 03***87 | Washer; (16.75x50.8x4.76-mm Thk) | 2 |
| 10***71 | Pin As | 2 |
178-0605 Pan Gp-Backrest -Lumbar
| 13***43 | Plate As-Lumbar | 1 |
| 17***52 | Retainer | 1 |
| 17***05 | Pan Group-Backrest; -Lumbar | 1 |
292-6402 Pan Gp-Backrest -Lumbar
| 13***43 | Plate As-Lumbar | 1 |
| 17***52 | Retainer | 1 |
| 17***07 | Holder | 1 |
292-9239 Pan Gp-Backrest -Cloth
| 16***83 | Knob-Lumbar | 1 |
| 25***28 | Plug | 3 |
| 29***99 | Cushion As-Back | 1 |
108-8421 Pan Gp-Backrest -Lumbar
| 10***21 | Pan Group-Backrest; -Seat Back | 1 |
| 10***23 | Shaft As-Lumbar | 1 |
| 10***24 | Pan-Lumbar | 1 |
180-7307 Pan Gp-Backrest -Cloth
| 16***83 | Knob-Lumbar | 1 |
| 16***24 | Cushion As-Back | 1 |
| 17***05 | Pan Group-Backrest; -Lumbar | 1 |
113-5810 Pan Gp-Seat
| 00***81 | Ring-Retaining | 2 |
| 11***09 | Pan As-Seat | 1 |
| 11***10 | Pan Group-Seat | 1 |
8x-2385 Panel Gp-Cab -High Profile
| 10***72 | Glass; (Rear)(High Profile) | 1 |
| 11***06 | Glass; (Side) | 2 |
| 14***09 | Glass; (Lower Front) | 2 |
8x-2375 Panel Gp-Cab
| 10***81 | Glass; (Low Profile/Rear) | 1 |
| 11***57 | Glass; (Side) | 2 |
| 14***09 | Glass; (Lower Front) | 2 |
122-9575 Panel Gp-Cab -Instrument
| 12***59 | Panel | 1 |
| 12***46 | Plate As | 2 |
| 12***75 | Panel Group-Cab; -Instrument | 1 |
8w-4746 Panel Gp-Instrument
| 10***37 | Film-Face | 1 |
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 12 |
| 11***15 | Gasket | 1 |
210-2270 Recliner Gp-Seat
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 1 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 1 |
| 17***90 | Spring | 1 |
177-4935 Recliner Gp-Seat
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 1 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 1 |
| 16***46 | Spring | 1 |
8w-7418 Rops Ar
| 8W***27 | Insulation Group-Weather | 1 |
| 8W***18 | Rops Ar | 1 |
| 8X***43 | Rops Group | 1 |
8w-7417 Rops Ar
| 8W***27 | Insulation Group-Weather | 1 |
| 8W***17 | Rops Ar | 1 |
| 8X***41 | Rops Group | 1 |
116-3100 Rops Ar
| 11***00 | Rops Ar | 1 |
| 12***75 | Panel Group-Cab; -Instrument | 1 |
| 3V***94 | Plug-Button | 1 |
8x-2248 Rops Gp
| 03***35 | Bolt-Self Locking; 2.22cm(.875 In.) Lg | 2 |
| 03***87 | Washer; (16.75x50.8x4.76-mm Thk) | 2 |
| 10***72 | Glass; (Rear)(High Profile) | 1 |
8x-2243 Rops Gp
| 15***12 | Plate-Warning; (Ops Certification, Read Omm) | 1 |
| 15***59 | Film-Instruction; (Do Not Drill, Weld Rops) | 2 |
| 18***56 | Plate Group-Certification | 1 |
8x-2241 Rops Gp
| 15***12 | Plate-Warning; (Ops Certification, Read Omm) | 1 |
| 15***59 | Film-Instruction; (Do Not Drill, Weld Rops) | 2 |
| 18***56 | Plate Group-Certification | 1 |
139-4612 Screen Gp-Sun -Rear
| 13***03 | Screen Group-Sun | 1 |
| 13***05 | Plate As | 1 |
| 13***12 | Screen Group-Sun; -Rear | 1 |
122-4617 Seat Belt Gp -Retractable
| 12***17 | Seat Belt Group; -Retractable-Operator | 1 |
| 1A***50 | Bolt (7/16-20x1.75in); (7/16-20x1.75-In) | 1 |
| 4D***32 | Locknut (7/16-20 Thd) | 1 |
156-1148 Seat Belt Gp -Retractable
| 15***48 | Seat Belt Group; -Retractable-Operator | 1 |
| 1A***50 | Bolt (7/16-20x1.75in); (7/16-20x1.75-In) | 1 |
| 1L***80 | Bolt; (7/16-20x1.5-In) | 1 |
222-0345 Seat Belt Gp -Retractable
| 0T***44 | Bolt (1.25" Long) | 1 |
| 20***88 | Bolt; (7/16-20) (44.5mml) | 1 |
| 22***45 | Seat Belt Group; -Retractable | 1 |
8y-3792 Seat Belt Gp -Retractable
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
| 8T***60 | Washer-Hard (For Use With 7/16 In Bolts) | 1 |
| 8Y***92 | Seat Belt Group; -Retractable-Operator | 1 |
114-1183 Seat Gp -Cloth, Lumbar
| 09***78 | Pin-Spring | 1 |
| 09***14 | Pin, Clevis | 1 |
| 10***21 | Pan Group-Backrest; -Seat Back | 1 |
175-1504 Seat Gp -Cloth
| 0T***44 | Bolt (1.25" Long) | 1 |
| 17***84 | Extension Group-Backrest; (Cloth) | 1 |
| 17***04 | Seat Group; -Cloth | 1 |
180-7306 Seat Gp -Cloth
| 09***43 | Pin-Cotter | 2 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 8 |
| 16***25 | Cushion As | 1 |
114-1185 Seat Gp -Vinyl, Lumbar
| 09***78 | Pin-Spring | 1 |
| 09***14 | Pin, Clevis | 1 |
| 10***21 | Pan Group-Backrest; -Seat Back | 1 |
112-9104 Seat Gp-Suspension -Cloth
| 11***04 | Seat Group-Suspension; -Cloth | 1 |
| 11***42 | Armrest Group; -Lh | 1 |
| 11***45 | Armrest Group; -Rh | 1 |
8y-4951 Seat Gp-Suspension -Vinyl
| 11***05 | Seat Group-Suspension; -Vinyl | 1 |
| 8Y***51 | Seat Group-Suspension; -Vinyl | 1 |
| 9X***41 | Screw-Truss Head (M10x1.50x20mm); (Truss Head) (M10x1.5x20mm) | 6 |
154-5732 Seat Gp-Suspension -Cloth
| 15***32 | Seat Group-Suspension; -Cloth | 1 |
| 15***58 | Seat Group-Suspension; -Cloth, Lumbar | 1 |
| 15***59 | Suspension Group-Seat; -Air | 1 |
155-5958 Seat Gp-Suspension -Cloth, Lumbar
| 11***42 | Armrest Group; -Lh | 1 |
| 11***45 | Armrest Group; -Rh | 1 |
| 11***83 | Seat Group; -Cloth, Lumbar | 1 |
112-9105 Seat Gp-Suspension -Vinyl
| 11***05 | Seat Group-Suspension; -Vinyl | 1 |
| 11***42 | Armrest Group; -Lh | 1 |
| 11***45 | Armrest Group; -Rh | 1 |
156-7778 Seat Gp-Suspension -Cloth, Lumbar
| 09***81 | Spacer; (10.5x20x10.0mm Thk) | 1 |
| 15***32 | Seat Group-Suspension; -Cloth | 1 |
| 15***78 | Seat Group-Suspension; -Cloth, Lumbar | 1 |
8y-4194 Seat Gp-Suspension -Cloth
| 11***04 | Seat Group-Suspension; -Cloth | 1 |
| 8Y***94 | Seat Group-Suspension; -Cloth | 1 |
| 9X***41 | Screw-Truss Head (M10x1.50x20mm); (Truss Head) (M10x1.5x20mm) | 6 |
200-3814 Seat Gp-Suspension -Cloth, Air
| 17***87 | Setscrew; (1/4-20-Thd) | 4 |
| 17***35 | Block Kit; (Includes Bolt, Washers, Blocks And Setscrews) | 1 |
| 17***04 | Seat Group; -Cloth | 1 |
8w-6318 Support Gp-Seat
| 10***40 | Cover | 1 |
| 11***51 | Plate | 1 |
| 12***18 | Cover | 1 |
273-2820 Suspension Gp-Seat
| 10***03 | Fastener | 26 |
| 14***26 | Film-Instruction; (Seat Adjustment) | 1 |
| 16***35 | Spring | 1 |
155-5959 Suspension Gp-Seat -Air
| 10***17 | Bumper | 4 |
| 12***57 | Shaft | 2 |
| 12***28 | Kit-Roller; (Incls Parts Marked S) | 1 |
113-5800 Suspension Gp-Seat
| 10***03 | Fastener | 20 |
| 10***94 | Kit-Tether Belt; (Suspension Seat)(Seat Suspension) | 1 |
| 10***95 | Kit-Suspension Roller; (Suspension Seat)(Seat Suspension) | 1 |
5d-4382 Valve Gp-Air Control -Parking Brake
| 1H***23 | Packing,Preformed Part Of Kit P/N 5r***25 | 1 |
| 4D***35 | Seat-Spring | 1 |
| 4D***38 | Valve-Inlet | 1 |
8x-2650 Valve Gp-Air Control
| 12***21 | Bolt | 3 |
| 2D***06 | Pin | 1 |
| 2G***85 | Kit-Air Control Valve; (Service Brake) | 1 |
8x-9680 Washer Gp-Window -Rear
| 14***95 | Hose; (650-cm Each) | 0 |
| 3V***16 | Nozzle As; (Rear) | 1 |
| 4D***88 | Clip-(Slot To Fit Fastener M10 Or 3/8) | 1 |
8x-9675 Washer Gp-Window -Front
| 10***45 | Cover | 1 |
| 10***65 | Pad; (Round) | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
239-8396 Washer Gp-Window
| 14***95 | Hose; (650-cm Each) | 0 |
| 23***96 | Washer Group-Window | 1 |
| 23***97 | Reservoir As | 1 |
239-8395 Washer Gp-Window
| 14***95 | Hose; (650-cm Each) | 0 |
| 23***95 | Washer Group-Window | 1 |
| 23***97 | Reservoir As | 1 |
150-5107 Window Gp-Cab -Lh
| 12***08 | Spacer; (10.31x17.45x50.8-mm Thk) | 1 |
| 12***09 | Plate | 1 |
| 12***10 | Plate | 1 |
139-6129 Window Gp-Cab -Side Sliding High Profile
| 13***32 | Window Group-Cab; -Side Sliding-High Profile | 2 |
| 13***29 | Window Group-Cab; -Side Sliding High Profile | 1 |
134-8233 Window Gp-Cab
| 10***58 | Nut; (10x32-mm) | 2 |
| 10***46 | Stop-Slide | 2 |
| 13***33 | Window Group-Cab; -Side Sliding-Low Profile | 1 |
150-5106 Window Gp-Cab -Rh
| 12***08 | Spacer; (10.31x17.45x50.8-mm Thk) | 1 |
| 12***09 | Plate | 1 |
| 12***10 | Plate | 1 |
134-8232 Window Gp-Cab -Side Sliding High Profile
| 10***58 | Nut; (10x32-mm) | 2 |
| 10***46 | Stop-Slide | 2 |
| 13***32 | Window Group-Cab; -Side Sliding-High Profile | 1 |
125-8847 Window Gp-Cab
| 12***47 | Window Group-Cab; -Lh | 1 |
| 12***08 | Spacer; (10.31x17.45x50.8-mm Thk) | 1 |
| 12***09 | Plate | 1 |
125-8846 Window Gp-Cab
| 12***46 | Window Group-Cab; -Rh | 1 |
| 12***08 | Spacer; (10.31x17.45x50.8-mm Thk) | 1 |
| 12***09 | Plate | 1 |
139-6128 Window Gp-Cab -Side Sliding
| 13***33 | Window Group-Cab; -Side Sliding-Low Profile | 2 |
| 13***28 | Window Group-Cab; -Side Sliding-Low Profile | 1 |
126-0961 Window Gp-Vent -Vent
| 12***61 | Window Group-Vent; -Vent | 1 |
| 15***06 | Window Group-Cab; -Rh | 1 |
| 15***07 | Window Group-Cab; -Lh | 1 |
155-7450 Wiper Ar-Window
| 15***50 | Wiper Ar-Window; -Rear | 1 |
| 8X***10 | Wiper Group-Window; -Rear | 1 |
| 8X***80 | Washer Group-Window; -Rear | 1 |
155-7451 Wiper Ar-Window
| 15***51 | Wiper Ar-Window; -Rear | 1 |
| 8X***11 | Wiper Group-Window; -Rear-High Profile | 1 |
| 8X***80 | Washer Group-Window; -Rear | 1 |
8x-2910 Wiper Gp-Window
| 10***44 | Motor Group-Window Wiper; (24-Volt)(24-Volt) | 1 |
| 13***78 | Cap; (Fuse Holder) | 1 |
| 20***07 | Motor Group-Window Wiper; (24-Volt)(Front, Upper) | 1 |
8x-2911 Wiper Gp-Window
| 10***44 | Motor Group-Window Wiper; (24-Volt)(24-Volt) | 1 |
| 13***78 | Cap; (Fuse Holder) | 1 |
| 20***07 | Motor Group-Window Wiper; (24-Volt)(Front, Upper) | 1 |
8x-2815 Wiper Gp-Window
| 10***44 | Motor Group-Window Wiper; (24-Volt)(24-Volt) | 2 |
| 12***54 | Arm-Window Wiper; (Front, Lower) | 2 |
| 12***55 | Blade As-Wiper; (335-mm)(High Profile Front Lower) | 2 |
8x-2810 Wiper Gp-Window -Front
| 10***44 | Motor Group-Window Wiper; (24-Volt)(24-Volt) | 2 |
| 12***54 | Arm-Window Wiper; (Front, Lower) | 2 |
| 12***55 | Blade As-Wiper; (335-mm)(High Profile Front Lower) | 2 |
3t-7068 Motor Gp-Window Wiper
| 3C***84 | Screw-Machine; (M5x0.8 Bg Thd) | 4 |
| 3T***59 | Bracket | 1 |
| 3T***68 | Wiper Group-Windshield; -Rear | 1 |
Power Train
200-2231 Adapter Gp-Engine To Tmsn
| 0S***79 | Bolt 5.08 cm(2 In.) Long | 1 |
| 0T***68 | Bolt,Machine; Tube Mounting And Tube To Junction Block Uoc:Bsv,Bsx | 1 |
| 0T***72 | Bolt; 7/16" Diameter X 1 1/2" Length Generator To Engine | 10 |
9d-9840 Adapter Gp-Transmission
| 0S***79 | Bolt 5.08 cm(2 In.) Long | 1 |
| 0T***68 | Bolt,Machine; Tube Mounting And Tube To Junction Block Uoc:Bsv,Bsx | 11 |
| 2P***43 | Coupling-Flywheel | 1 |
2p-6899 Case Gp-Transmission
| 0L***61 | Pin-Dowel; (9.4mm X 22mm) | 2 |
| 1P***94 | Sleeve | 4 |
| 2P***19 | Tube | 1 |
6g-1750 Chain Gp-Drive
| 6G***67 | Link-Connecting | 1 |
| 6G***70 | Chain Group | 4 |
| 6G***50 | Chain Group | 1 |
8x-4121 Control Gp-Differential Lock
| 13***72 | Hose As | 1 |
| 14***95 | Valve & Mtg Group-Diff Lock | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 2 |
8e-4132 Control Gp-Transmission Hyd
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 4 |
| 11***75 | Valve Group-Relief; -Main | 1 |
| 1T***16 | Bolt; (5/16-18x0.75-In)(12 Point Hd) | 1 |
2w-6780 Cooler Gp-Transmission Oil
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 7 |
| 2M***08 | Gasket | 2 |
3p-2770 Cover Gp-Shipping
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0T***02 | Bolt; (3/8-16x0.625-In)(Shield To Head) | 2 |
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 6 |
8d-5415 Differential & Bevel Gear Gp
| 03***60 | Cup-Roller Bearing | 2 |
| 03***61 | Cone-Roller Bearing | 1 |
| 03***35 | Bolt-Self Locking; 2.22cm(.875 In.) Lg | 2 |
8d-5405 Differential Gp
| 11***08 | Spider | 1 |
| 1D***69 | Bolt 107.95 mm(4.25 In.) Long; Bolt (Plate To Front Housing) | 8 |
| 1D***09 | Bolt Canopy Assembly To Mounting Brackets; Bolt-Canopy Assembly To Mounting Brackets | 18 |
8x-5730 Filler Gp-Power Train Oil
| 2G***13 | Tube Assem. | 1 |
| 2G***14 | Gauge; (Power Train Oil) | 1 |
| 4F***01 | Lug (To Lh Rail As-Cab) | 2 |
172-4662 Filter Gp-Oil -Transmission
| 17***62 | Filter Group-Oil; -Transmission | 1 |
| 1R***19 | Filter Element As-Oil; (Standard Efficiency)(Power Train) | 1 |
| 2J***56 | Ring-Retaining | 1 |
5t-7157 Final Drive Gp
| 03***35 | Bolt-Self Locking; 2.22cm(.875 In.) Lg | 16 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 10 |
| 0S***25 | Bolt, Hex. Hd., 5/8"-11 N.C. X 2 1/2" | 32 |
8e-3027 Gear & Case Gp-Transfer
| 0L***15 | Bolt 88.90 mm(3.50 In.) N.F. | 1 |
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 7 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 11 |
6i-9851 Lines Gp-Power Train Oil
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 6 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 2 |
2p-5800 Planetary Gp-Transmission
| 03***35 | Bolt-Self Locking; 2.22cm(.875 In.) Lg | 8 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 30 |
8x-5070 Power Train Ar
| 11***65 | Lines Group-Power Train Cooler | 1 |
| 14***05 | Mounting Group-Wheel | 1 |
| 20***31 | Adapter Group-Engine To Tmsn | 1 |
8e-1479 Pump Gp-Gear
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 4 |
| 1B***75 | Ball Bearing; (85 mm Od) | 1 |
| 2H***43 | Seal-Lip Type | 1 |
8e-1480 Pump Gp-Gear
| 0S***08 | Bolt-Support To Starting Engine Timing Gear Housing | 4 |
| 1B***36 | Key-Woodruff | 1 |
| 1M***80 | Bearing; (25.413 mm Od) | 2 |
127-3365 Slip Joint Gp
| 0S***84 | Cap Screw (2 1/4" Long) | 8 |
| 12***62 | Yoke As-Slip | 1 |
| 12***65 | Slip Joint Group | 1 |
112-5497 Slip Joint Gp
| 0S***84 | Cap Screw (2 1/4" Long) | 8 |
| 11***97 | Slip Joint Group | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 1 |
8x-5470 Tandem & Cover Gp
| 00***53 | Elbow-Pipe; (1/2-14 Nptf Thd) | 2 |
| 10***36 | Cover | 2 |
| 1F***88 | Breather As; (Crankcase Pressure) | 2 |
152-4723 Tire & Rim Gp
| 13***28 | Tire; (20.5-R25) | 1 |
| 15***23 | Tire & Rim Group | 1 |
| 2D***07 | Stud | 1 |
152-4718 Tire & Rim Gp
| 15***18 | Tire & Rim Group | 1 |
| 2D***07 | Stud | 1 |
| 2D***08 | Grommmet | 1 |
109-9976 Tire & Rim Gp
| 10***76 | Tire & Rim Group | 1 |
| 2D***08 | Grommmet | 1 |
| 2D***09 | Locknut; (11/16-16-Thd) | 1 |
109-9970 Tire & Rim Gp
| 10***70 | Tire & Rim Group | 1 |
| 2D***08 | Grommmet | 1 |
| 2D***09 | Locknut; (11/16-16-Thd) | 1 |
109-9969 Tire & Rim Gp
| 10***69 | Tire & Rim Group | 1 |
| 2D***08 | Grommmet | 1 |
| 2D***09 | Locknut; (11/16-16-Thd) | 1 |
109-9975 Tire & Rim Gp
| 10***75 | Tire & Rim Group | 1 |
| 2D***07 | Stud | 1 |
| 2D***08 | Grommmet | 1 |
109-9971 Tire & Rim Gp
| 10***71 | Tire & Rim Group | 1 |
| 15***45 | Tire; (16-R24) | 1 |
| 2D***65 | Seal-O-Ring | 1 |
109-9978 Tire & Rim Gp
| 10***78 | Tire & Rim Group | 1 |
| 2D***08 | Grommmet | 1 |
| 2D***09 | Locknut; (11/16-16-Thd) | 1 |
109-9977 Tire & Rim Gp
| 10***77 | Tire & Rim Group | 1 |
| 2D***08 | Grommmet | 1 |
| 2D***09 | Locknut; (11/16-16-Thd) | 1 |
152-4719 Tire & Rim Gp
| 14***53 | Tire; (16-R24) | 1 |
| 15***19 | Tire & Rim Group | 1 |
| 2D***07 | Stud | 1 |
9d-5801 Tire Gp
| 9D***01 | Tire Group | 1 |
201-6900 Tire Gp
| 20***00 | Tire Group | 1 |
8w-9600 Tire Gp
| 8W***00 | Tire Group | 1 |
8d-3765 Tire Gp
| 8D***65 | Tire Group | 1 |
9d-5806 Tire Gp
| 9D***06 | Tire Group | 1 |
7i-4611 Tire Gp
| 7I***11 | Tire Group | 1 |
8e-3028 Transmission Ar
| 17***62 | Filter Group-Oil; -Transmission | 1 |
| 2P***00 | Planetary Group | 1 |
| 3P***70 | Cover Group-Shipping | 1 |
144-6295 Valve & Mtg Gp-Diff Lock
| 14***94 | Valve Group-Solenoid; -Diff Lock | 1 |
| 14***95 | Valve & Mtg Group-Diff Lock | 1 |
| 14***16 | Manifold | 1 |
7t-9073 Valve & Mtg Gp-Diff Lock
| 7T***73 | Valve & Mtg Group-Diff Lock | 1 |
| 9W***06 | Valve Group-Solenoid | 1 |
174-3705 Valve & Mtg Gp-Diff Lock
| 14***16 | Manifold | 1 |
| 15***64 | Valve Group-Solenoid | 1 |
| 17***05 | Valve & Mtg Group-Diff Lock | 1 |
2p-5816 Valve Gp-Selector & Press Cont -Modulating Reducing-Speed
| 1L***69 | Ring-Retaining | 1 |
| 1S***36 | Retainer | 1 |
| 1S***38 | Ring-Retaining | 1 |
2p-5814 Valve Gp-Selector & Press Cont -Direction
| 1P***85 | Spool | 1 |
| 1T***16 | Bolt; (5/16-18x0.75-In)(12 Point Hd) | 4 |
| 2B***58 | Plug--To Block Upper Front Air Manifold | 1 |
8e-4130 Valve Gp-Pilot -Speed Select
| 2H***65 | Pin (Spring) | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
| 3P***62 | Stop | 1 |
8p-1100 Valve Gp-Selector & Press Cont -Manual Modulating-Differential-Speed
| 1P***61 | Spool-Differential Safety | 1 |
| 1T***16 | Bolt; (5/16-18x0.75-In)(12 Point Hd) | 7 |
| 2H***32 | Seal--To Bottom Cover On Selector Valve | 1 |
144-6294 Valve Gp-Solenoid -Diff Lock
| 11***43 | Locknut; (5/16-18-Thd) | 2 |
| 14***50 | Cartridge As | 1 |
| 14***94 | Valve Group-Solenoid; -Diff Lock | 1 |
154-3064 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***43 | Locknut; (5/16-18-Thd) | 2 |
| 14***50 | Cartridge As | 1 |
9w-0706 Valve Gp-Solenoid
| 10***70 | Locknut; (1/4-20-Thd) | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
| 4B***76 | Washer Generator Line Leads (Use As Required) | 1 |
8e-4131 Valve Gp-Transmission Control
| 0A***64 | Clip Diode Uoc:Bsv,Bsx | 1 |
| 2P***14 | Valve Group; -Direction | 1 |
| 2P***16 | Valve Group; -Modulating Reducing-Speed | 1 |
152-3946 Wheel & Tire Ar
| 14***11 | Wheel & Tire Group | 6 |
| 15***46 | Wheel & Tire Ar | 1 |
152-3929 Wheel & Tire Ar
| 14***03 | Wheel & Tire Group | 6 |
| 15***29 | Wheel & Tire Ar | 1 |
152-3949 Wheel & Tire Ar
| 14***14 | Wheel & Tire Group | 6 |
| 15***49 | Wheel & Tire Ar | 1 |
152-3940 Wheel & Tire Ar
| 14***05 | Wheel & Tire Group | 6 |
| 15***40 | Wheel & Tire Ar | 1 |
152-3927 Wheel & Tire Ar
| 14***01 | Wheel & Tire Group | 6 |
| 15***27 | Wheel & Tire Ar | 1 |
152-3938 Wheel & Tire Ar
| 15***33 | Wheel & Tire Group | 6 |
| 15***38 | Wheel & Tire Ar | 1 |
152-3928 Wheel & Tire Ar
| 14***02 | Wheel & Tire Group | 6 |
| 15***28 | Wheel & Tire Ar | 1 |
151-0353 Wheel & Tire Ar
| 14***96 | Wheel & Tire Group | 6 |
| 15***53 | Wheel & Tire Ar | 1 |
152-3941 Wheel & Tire Ar
| 14***06 | Wheel & Tire Group | 6 |
| 15***41 | Wheel & Tire Ar | 1 |
152-3943 Wheel & Tire Ar
| 14***08 | Wheel & Tire Group | 6 |
| 15***43 | Wheel & Tire Ar | 1 |
9d-5799 Wheel & Tire Ar
| 9D***99 | Wheel & Tire Ar | 1 |
| 9D***01 | Tire Group | 1 |
| 9D***02 | Wheel Group | 1 |
8x-8151 Wheel & Tire Ar
| 8X***51 | Wheel & Tire Ar | 1 |
| 9D***02 | Wheel Group | 1 |
152-3942 Wheel & Tire Ar
| 14***07 | Wheel & Tire Group | 6 |
| 15***42 | Wheel & Tire Ar | 1 |
152-3945 Wheel & Tire Ar
| 14***10 | Wheel & Tire Group | 6 |
| 15***45 | Wheel & Tire Ar | 1 |
2a-7339 Wheel & Tire Ar
| 2A***39 | Wheel & Tire Ar | 1 |
| 9D***02 | Wheel Group | 1 |
152-3947 Wheel & Tire Ar
| 14***12 | Wheel & Tire Group | 6 |
| 15***47 | Wheel & Tire Ar | 1 |
152-3944 Wheel & Tire Ar
| 14***09 | Wheel & Tire Group | 6 |
| 15***44 | Wheel & Tire Ar | 1 |
151-0360 Wheel & Tire Ar
| 14***33 | Tire; (16-24) | 1 |
| 14***31 | Wheel Group | 1 |
| 14***97 | Wheel & Tire Group | 6 |
151-0390 Wheel & Tire Ar
| 14***98 | Wheel & Tire Group | 6 |
| 15***90 | Wheel & Tire Ar | 1 |
9d-5798 Wheel & Tire Ar
| 9D***98 | Wheel & Tire Ar | 1 |
| 9D***02 | Wheel Group | 1 |
| 9D***06 | Tire Group | 1 |
142-6410 Wheel & Tire Gp
| 12***66 | Tire; (20.5-25) | 1 |
| 14***32 | Wheel Group; -Barefoot | 1 |
| 14***10 | Wheel & Tire Group | 1 |
142-6412 Wheel & Tire Gp
| 14***32 | Wheel Group; -Barefoot | 1 |
| 14***12 | Wheel & Tire Group | 1 |
| 2D***07 | Stud | 1 |
142-6403 Wheel & Tire Gp
| 14***31 | Wheel Group | 1 |
| 14***03 | Wheel & Tire Group | 1 |
| 2D***07 | Stud | 1 |
152-3933 Wheel & Tire Gp
| 14***31 | Wheel Group | 1 |
| 14***53 | Tire; (16-R24) | 1 |
| 15***33 | Wheel & Tire Group | 1 |
142-6398 Wheel & Tire Gp
| 14***34 | Tire; (16-24) | 1 |
| 14***31 | Wheel Group | 1 |
| 14***98 | Wheel & Tire Group | 1 |
142-6409 Wheel & Tire Gp
| 12***65 | Tire; (20.5x25)(20.5 X 25-12 Ply) | 1 |
| 14***32 | Wheel Group; -Barefoot | 1 |
| 14***09 | Wheel & Tire Group | 1 |
142-6396 Wheel & Tire Gp
| 14***22 | Tire; (16-24) | 1 |
| 14***31 | Wheel Group | 1 |
| 14***96 | Wheel & Tire Group | 1 |
142-6402 Wheel & Tire Gp
| 14***31 | Wheel Group | 1 |
| 14***02 | Wheel & Tire Group | 1 |
| 15***45 | Tire; (16-R24) | 1 |
142-6407 Wheel & Tire Gp
| 12***63 | Tire; (20.5-25) | 1 |
| 14***32 | Wheel Group; -Barefoot | 1 |
| 14***07 | Wheel & Tire Group | 1 |
142-6414 Wheel & Tire Gp
| 11***57 | Tire; (20.5-R25) | 1 |
| 14***32 | Wheel Group; -Barefoot | 1 |
| 14***14 | Wheel & Tire Group | 1 |
142-6415 Wheel & Tire Gp
| 13***28 | Tire; (20.5-R25) | 1 |
| 14***32 | Wheel Group; -Barefoot | 1 |
| 14***15 | Wheel & Tire Group | 1 |
142-6405 Wheel & Tire Gp
| 12***64 | Tire-Tubeless; (20.5-25) | 1 |
| 14***32 | Wheel Group; -Barefoot | 1 |
| 14***05 | Wheel & Tire Group | 1 |
142-6411 Wheel & Tire Gp
| 14***32 | Wheel Group; -Barefoot | 1 |
| 14***11 | Wheel & Tire Group | 1 |
| 2D***07 | Stud | 1 |
142-6397 Wheel & Tire Gp
| 14***33 | Tire; (16-24) | 1 |
| 14***31 | Wheel Group | 1 |
| 14***97 | Wheel & Tire Group | 1 |
142-6408 Wheel & Tire Gp
| 12***67 | Tire; (20.5-25) | 1 |
| 14***32 | Wheel Group; -Barefoot | 1 |
| 14***08 | Wheel & Tire Group | 1 |
142-6406 Wheel & Tire Gp
| 12***62 | Tire; (20.5-25) | 1 |
| 14***32 | Wheel Group; -Barefoot | 1 |
| 14***06 | Wheel & Tire Group | 1 |
142-6401 Wheel & Tire Gp
| 14***31 | Wheel Group | 1 |
| 14***01 | Wheel & Tire Group | 1 |
| 2D***07 | Stud | 1 |
148-2412 Wheel Ar
| 14***07 | Wheel Group | 6 |
| 14***12 | Wheel Ar | 1 |
148-2432 Wheel Ar
| 14***31 | Wheel Group | 6 |
| 14***32 | Wheel Ar | 1 |
8d-1720 Wheel Gp
| 2D***07 | Stud | 1 |
| 2D***08 | Grommmet | 1 |
| 2D***09 | Locknut; (11/16-16-Thd) | 1 |
142-6231 Wheel Gp
| 14***31 | Wheel Group | 1 |
| 2D***54 | Ring-Lock | 1 |
| 8W***66 | Flange As | 1 |
148-2431 Wheel Gp
| 14***32 | Wheel Group; -Barefoot | 1 |
| 14***31 | Wheel Group | 1 |
| 2D***07 | Stud | 1 |
148-2407 Wheel Gp
| 14***31 | Wheel Group | 1 |
| 14***07 | Wheel Group | 1 |
| 2D***08 | Grommmet | 1 |
142-6232 Wheel Gp
| 14***32 | Wheel Group; -Barefoot | 1 |
| 17***74 | Flange As | 1 |
| 25***50 | Rim As; (17x25) | 1 |
9d-5802 Wheel Gp
| 2D***07 | Stud | 1 |
| 2D***08 | Grommmet | 1 |
| 2D***09 | Locknut; (11/16-16-Thd) | 1 |
Service Equipment And Supplies
136-4831 Box Gp-Tool
| 13***31 | Box Group-Tool | 1 |
| 4L***54 | Capscrew; (3/8-16x21 In) (Gd8) (Hex Hd) (4-Roller) | 4 |
| 5P***75 | Washer-Hard; (10.2x22.5x3-mm Thk)(Shield To A/C) | 6 |
339-6231 Film Gp
| 11***52 | Plate & Film Group; -Engine Information | 1 |
| 27***98 | Tag-Information; (Crankcase, No Oil) | 1 |
| 33***31 | Film Group | 1 |
116-0032 Film Gp
| 10***88 | Film-Stripe; (Cat)(Engine Enclosure) | 2 |
| 10***91 | Film-Stripe-Rh; (Rear) | 1 |
| 10***92 | Film-Stripe-Lh; (Rear) | 1 |
8t-5255 Jack-Hydraulic
| 8T***55 | Jack-Hydraulic | 1 |
116-9473 Plate & Film Gp
| 11***73 | Plate & Film Group | 1 |
| 3E***44 | Film-Instruction; (Hydraulic Accumulator) | 2 |
| 5P***39 | Film-Warning; (Rotating Fan Blades)(On Side Of Fuel Tank) | 6 |
133-7817 Plate & Film Gp
| 10***08 | Film-Warning; (Jump Start, Read Omm) | 2 |
| 10***29 | Plate-Warning; (Do Not Operate) | 1 |
| 12***19 | Plate-Warning; (High Pressure) | 2 |
116-9471 Plate & Film Gp
| 11***71 | Plate & Film Group | 1 |
| 1P***82 | Plate-Warning; (High Press Cylinder) | 2 |
| 5P***37 | Film-Warning; (Rotating Fan Blades)(On Side Of Fuel Tank) | 6 |
116-9474 Plate & Film Gp
| 11***74 | Plate & Film Group | 1 |
| 1P***84 | Plate-Warning; (High Pressure) | 2 |
| 3E***45 | Film-Instruction; (Hydraulic Accumulator) | 2 |
133-7825 Plate & Film Gp
| 10***09 | Film-Warning; (Jumper Cables) | 2 |
| 10***30 | Plate-Warning; (Do Not Operate) | 1 |
| 12***20 | Plate-Warning; (High Pressure) | 2 |
7x-3238 Plate & Film Gp
| 11***52 | Plate & Film Group; -Engine Information | 1 |
| 11***32 | Film Group | 1 |
| 13***58 | Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap) | 1 |
116-9472 Plate & Film Gp
| 11***72 | Plate & Film Group | 1 |
| 1P***83 | Plate-Warning; (High Pressure) | 2 |
| 3E***43 | Plate-Instruction; (Hydraulic Accumulator) | 2 |
116-9475 Plate & Film Gp
| 10***23 | Film-Instruction; (Hydraulic Accumulator) | 2 |
| 11***75 | Plate & Film Group | 1 |
| 8C***10 | Film-Warning; (High Pressure Cylinder) | 1 |
116-9470 Plate & Film Gp
| 11***70 | Plate & Film Group | 1 |
| 3E***69 | Film-Warning; (Rotating Fan Blades)(On Side Of Fuel Tank) | 6 |
| 3E***89 | Plate-Main Frame; (Do Not Drill Or Weld) | 1 |
116-9476 Plate & Film Gp
| 11***76 | Plate & Film Group | 1 |
| 3E***71 | Film-Warning; (Rotating Fan Blades)(On Side Of Fuel Tank) | 6 |
| 3E***91 | Plate-Instruction; (Do Not Drill Or Weld) | 1 |
5m-8212 Plate & Film Gp
| 3N***90 | Plate Serial Number; On R.H. Rear Bank Of Cylinder Block As Viewed From Rear Of Engine | 1 |
| 5M***12 | Plate & Film Group | 1 |
| 8S***58 | Seal-- Governor Wire | 2 |
116-9468 Plate & Film Gp
| 11***68 | Plate & Film Group | 1 |
| 3E***70 | Film-Warning; (Rotating Fan Blades) | 6 |
| 3E***90 | Plate-Instruction; (Do Not Drill Or Weld) | 1 |
115-5852 Plate & Film Gp -Engine Information
| 11***52 | Plate & Film Group; -Engine Information | 1 |
116-9469 Plate & Film Gp
| 11***69 | Plate & Film Group | 1 |
| 3E***72 | Film-Warning; (Rotating Fan Blades) | 6 |
| 3E***92 | Plate-Instruction; (Do Not Drill Or Weld) | 1 |
116-9477 Plate & Film Gp
| 10***27 | Film-Instruction; (Hydraulic Accumulator)(Hydraulic Accumulator) | 2 |
| 11***77 | Plate & Film Group | 1 |
| 5P***61 | Plate-Warning; (Read Omm) | 1 |
9d-2700 Box Gp-Tool
| 1D***17 | Nut-Plate And Angle Assembly To Hydraulic And Fuel Tanks; Nut Plate And Angle Assembly To Hydraulic And Fuel Tanks | 2 |
| 4L***54 | Capscrew; (3/8-16x21 In) (Gd8) (Hex Hd) (4-Roller) | 4 |
| 5M***62 | Bolt; (3/8-16x0.75-In) | 4 |
9s-7978 Tool Gp-Hand
| 1F***57 | Screw Driver (-) | 1 |
| 1P***45 | Gauge Group-Pressure | 1 |
| 1P***30 | Socket; (9/16-In)(9/16" Opening) | 1 |
Work Tools
107-3428 Bit Gp -16 Ft-64 Std Bits
| 06***60 | Ring-Retaining | 1 |
| 10***28 | Bit Group; -16 Ft-64 Std Bits | 1 |
| 15***14 | Adapter; (4-Ft)(Outside) | 4 |
107-3427 Bit Gp -14 Ft-56 Std Bits
| 06***60 | Ring-Retaining | 1 |
| 10***27 | Bit Group; -14 Ft-56 Std Bits | 1 |
| 15***13 | Adapter; (3-Ft)(Inside) | 2 |
8x-5480 Blade Ar
| 10***83 | Lines Group-Hydraulic | 1 |
| 10***88 | Lines Group-Hydraulic | 1 |
| 6G***70 | Circle Group | 1 |
8w-8426 Blade Gp
| 1J***62 | Bolt-Plow | 10 |
| 2J***06 | Nut Front Support To Frame; Nut-Front Support To Frame | 42 |
| 5J***73 | Bolt 2.06cm(.8125in.)Long | 32 |
8w-8425 Blade Gp
| 1J***62 | Bolt-Plow | 10 |
| 2J***06 | Nut Front Support To Frame; Nut-Front Support To Frame | 38 |
| 5J***73 | Bolt 2.06cm(.8125in.)Long | 28 |
107-3424 Edge Gp-Cutting -8 Ft
| 10***24 | Edge Group-Cutting; -8 Ft | 1 |
| 4T***36 | Edge-Cutting; Curved 2.44 M (8 Ft.) 203.2 mm (8 In.) Wide & 25.4 mm (1 In.) Thick | 2 |
| 5J***73 | Bolt 2.06cm(.8125in.)Long | 10 |
9d-2170 Edge Gp-Cutting -14 Ft
| 6Y***03 | Bit-End (Moldboard) | 2 |
| 9D***70 | Edge Group-Cutting; Cutting Edge Group--Curved 14 Foot-- | 1 |
265-6743 Extension Gp-Blade
| 11***34 | Spacer; (3-mm Thk) | 3 |
| 13***24 | Extension-Lh | 1 |
| 1J***62 | Bolt-Plow | 8 |
265-6744 Extension Gp-Blade
| 11***34 | Spacer; (3-mm Thk) | 3 |
| 13***23 | Extension-Rh | 1 |
| 1J***62 | Bolt-Plow | 8 |
8d-5970 Lift Gp-Blade
| 1A***35 | Bolt 2.00 In. (5.08 cm) Long | 4 |
| 1A***05 | Bolt (5 In. Long); (5/8-11x5-In) | 4 |
| 1D***14 | Bolt--Front Support To Frame | 6 |
119-6240 Mounting Gp-Ripper
| 11***40 | Mounting Group-Ripper | 1 |
| 11***42 | Plate As | 1 |
| 12***70 | Link As | 2 |
119-6239 Ripper Ar
| 11***64 | Cylinder Group-Ripper | 1 |
| 11***39 | Ripper Ar | 1 |
| 11***40 | Mounting Group-Ripper | 1 |
8j-6575 Ripper Gp
| 19***86 | Film; (Safety) (To Right And Left Of Fuel Tank) | 2 |
| 1K***72 | Locknut Horn To Guard | 8 |
| 2K***03 | Washer (Bar) | 1 |
212-6232 Scarifier Gp
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 19***18 | Shank | 5 |
| 21***32 | Scarifier Group; -5-Teeth | 1 |
212-6231 Scarifier Gp
| 13***34 | Plate-Identification; (Work Tool) | 1 |
| 19***18 | Shank | 11 |
| 21***31 | Scarifier Group; -Hydraulic | 1 |
8j-1434 Tooth Gp-Ripper -Straight
| 11***59 | Retainer Assembly; (G.E.T.) | 1 |
| 13***08 | Pin | 1 |
| 2K***13 | Pin | 1 |
14H NA serial number reference
The PIN/serial plate on this grader sits on the frame, most often on the left side of the front frame rail near the front axle, or riveted to the cab support post near the operator's seat. The plate shows an 8-character Product Identification Number: the first 3 letters are the serial-number prefix that ties the unit to a model and production block, and the 5 digits after it are that unit's sequence number within the prefix. Read the 3-letter prefix first to identify which build family the machine belongs to before using the digits to place it in the run.
| Prefix | Identifies | Notes |
|---|---|---|
| 7WJ | 14H NA motor grader | Serial range starts at 7WJ00001 and runs up from there. Fitted with the Cat 3306 diesel engine, turbocharged and aftercooled (DITA). Direct drive powershift transmission with 8 speeds forward and reverse; units from roughly the 7WJ00168 mark onward use electronic control on that transmission in place of the earlier hydraulic control. Production falls roughly in the 1996 to 2002 window. |
Frequently asked questions
What engine does the Caterpillar 14H NA motor grader use?
The 14H NA is powered by a Caterpillar 3306 DITA inline-six diesel, a mechanically governed engine that is turbocharged and air-to-air aftercooled, with roughly 10.3 liters (629 cu in) of displacement. Gross power is rated in the 215-240 hp (160-179 kW) range depending on gear range and factory setup. Other regional 14H builds (base, ES) used a different electronically tuned engine, so verify the rating plate on your specific machine before ordering engine parts.
What is the operating weight of the Caterpillar 14H NA motor grader?
Standard operating weight is approximately 18.8 tonnes (41,400-41,500 lb). Fully equipped with ballast, counterweight, and rear attachments such as a ripper or scarifier, operating weight can reach roughly 26.5 tonnes (58,500 lb). Exact figures vary by tire size, ballast package, and attachment configuration.
What replaced the Caterpillar 14H NA motor grader?
The 14H generation, including the NA configuration, was succeeded by the Cat 14M, introduced in the mid-to-late 2000s with an updated engine platform and cab, later carried forward through the 14M2/14M3 updates to today's Cat 14 Motor Grader. The 14H itself had replaced the earlier 14G. Driveline and structural wear parts often carry over across these generations, but engines and electronics differ by model and configuration.
What 14H NA owners discuss
What engine does the 14H NA run, and what quirks come with it?
The 14H NA is built around the Caterpillar 3306 direct-injection turbocharged-and-aftercooled (DITA) engine, a mechanically governed unit with no electronic fuel control. Spec sheets list gross output near 179 kW (240 hp) at 2000 rpm; net flywheel figures quoted for this DITA rating run closer to 160-168 kW (215-225 hp), so treat the higher number as advertised gross and expect field output nearer the lower end (figures vary by rating source and configuration). Quirks match other DITA-family 3306s. Injector wear shows up as smoke and rough idle before power drops off. The injection pump can weep fuel near the exhaust manifold, a fire-watch item and not just a nuisance leak. The turbo loses efficiency first under sustained heavy grading. Valve-cover and front-timing-gear-seal weeps are common on higher-hour units and rarely worth chasing unless the volume increases.
What transmission and powertrain behavior should owners expect?
The powershift transmission on this grader is electronically modulated, with shift solenoids driven off 24V circuits rather than a purely hydro-mechanical valve body. The most reported pattern across the H-series grader family, which the 14H NA is part of, is a single gear dropping out or the transmission kicking to neutral mid-shift, traced to a shift solenoid reading low or open rather than a worn clutch pack. Diagnosis should start at the solenoid connectors and control valve body before clutches are condemned. Separately, running the machine on low system air pressure lets the parking clutch and brake engage and burn under load. Because that involves the park and service brake circuit, have your dealer verify the parking brake system before relying on it.
Is sluggish steering or implement response cause for concern?
Not by itself. Cold hydraulic fluid is thick and steering or implement response stays slow until the oil reaches temperature on this class of grader. What is not normal is a loud bang or knock at full steering lock. The older G-series design had a lever-sticking fault that held the pump at high pressure, and Caterpillar changed the pump control on the H-series specifically to move away from it, so persistent lock-to-lock noise on an H-series machine points to a cushion valve or relief issue rather than the old G-series fault. Because a failing cushion valve can progress to a steering failure, have your dealer verify steering circuit pressures before the machine goes back to work.
What wear patterns show up on the circle, drawbar, and moldboard slides?
This assembly is the grader's equivalent of undercarriage wear. It rides on replaceable wear strips, and keeping that stack tight is what lets the machine hold grade tolerance. Loose slides show up first as chatter in the blade and a circle that will not hold position under load. Composite wear-strip material tends to outlast plain metallic strips when greasing schedules slip, which matters on machines with an irregular maintenance history. Uneven wear concentrated on one end of the moldboard usually traces to operator technique or a bent or loose linkage rather than a parts defect, so check linkage alignment before condemning the blade.
Are tandem case or final drive leaks common on this machine?
Yes, and it is a long-running trait of the Cat grader line generally, not a defect unique to one serial range. The tandem cases use a floating-face seal, and once it starts weeping gear oil, dirt works back into the case and accelerates wear inside the planetary. Older G-series units reportedly ran longer before the seals began weeping than newer builds. By the time a grader in this size and hour class has been in service for years, a tandem reseal is a reasonable expectation rather than a surprise finding. Checking tandem oil level and condition belongs in any periodic or pre-purchase inspection on these machines.
What electrical or sensor issues come up on the 14H NA?
The engine itself is mechanically injected with no engine-side electronic control module, so there is no engine fault-code history to pull. That is expected on this machine, not a sign of a disconnected sensor. Electrical complaints on machines this age center on the gauge and monitoring senders: the oil pressure switch, coolant temperature sender, and the engine speed sensor feeding the tachometer and hour meter, all riding on wiring that corrodes at the connector after years of exposure. A corroded connector on the speed sensor circuit is a common cause of an inaccurate or dead hour meter, which matters when hours are being used to judge a used unit's condition. The transmission control system is separate and carries its own solenoid-circuit fault codes, so an electrical complaint on this machine usually traces to one system or the other, not both at once.
What should a buyer check on a used 14H NA?
Start with the frame. Sight down both sides with the machine straight and look for front-to-rear misalignment, which points to a bent or loose articulation joint. Run the steering to full lock in both directions listening for knocking or banging at the cushion valve, and check front axle pivot play by jacking one wheel and confirming it moves freely without bouncing. Cycle every hydraulic function checking for cylinder drift, worn pins, and play at the stirrup arms. Check circle, drawbar, and moldboard slide tightness rather than trusting fresh paint to hide play. Pull tandem case oil on both sides and look for water or metal contamination that signals a failing seal. Run the transmission through every gear forward and reverse under load, not just idling in the yard, since intermittent solenoid faults often only surface warm and loaded. Given the safety weight of the steering and brake findings on this list, have your dealer verify both systems before the machine goes back to work.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 14H NA part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.