Caterpillarmotor grader

Caterpillar 140K

Q: What engine does the Caterpillar 140K motor grader use?

The 140K uses a Cat C7 ACERT six-cylinder diesel, part of the K Series lineup shared with the 12K, 120K, and 160K graders. Output is generally cited in the 128-155 kW (roughly 171-208 hp) range through Caterpillar's variable horsepower (VHP) system, with the exact rating varying by emissions calibration (Tier 2/Stage II or Tier 3/Stage IIIA equivalent) and gear selection.

Q: What is the operating weight of the Caterpillar 140K?

Operating weight is typically reported between about 17.3 and 22.9 tonnes (roughly 38,100-50,420 lb), varying by configuration - tire choice, all-wheel-drive versus standard rear-tandem drive, counterweighting, and attachments all shift the figure, so treat it as a range rather than a single spec.

Q: What replaced the Caterpillar 140K motor grader?

The 140K was itself the replacement for the 140H, and Caterpillar later issued the 140K2 - the same platform with an updated Tier 2 emissions calibration - as its direct successor. In parallel, Caterpillar's broader 140-family lineup for stricter-emissions markets moved on to the 140M, 140M2, and 140M3 generations, and more recently the 140 GC, though those developed alongside rather than strictly replacing the K Series in its target markets.

Q: What engine is actually in the Cat 140K, and are there generation-specific quirks to watch for?

Cat literature and dealer spec sheets confirm the entire K-series line (120K/12K/140K/160K) uses the Cat C7 ACERT, a 7.2 L (439 in³) inline-6, typically listed at 128-143 kW (171-191 hp) net depending on rating, meeting Tier 3/Stage IIIA (or Tier 2/Stage II equivalent in the 140K2 variant sold in emissions-tier-2 markets like India, which sources describe as the same engine simply detuned for that market - not a different block). Community discussion of C7 ACERT engines generally centers on the HEUI fuel system: hard-starting or no-start complaints are frequently traced to low fuel transfer pressure or injection actuation pressure (IAP) not reaching the commanded value, since HEUI injectors rely on engine oil pressure to fire, and to turbo-inlet/EGR passage fouling over time on ACERT-era engines. Caveat: most of the detailed injector/EGR/DPF complaints found in searches come from on-highway C7 ACERT truck installations; the industrial Tier 3 grader rating does not carry a diesel particulate filter, so treat soot-related emissions complaints as a general ACERT-family watch item rather than a confirmed 140K-specific failure. Have your dealer verify any fuel pressure or IAP fault code before authorizing injector or HEUI pump replacement.

Q: Owners report the 140K sometimes won't move forward but reverse works fine - what's the community troubleshooting path?

A documented 140K case (engine running normally, reverse functional, forward not engaging) led mechanics through a standard sequence: check the transmission linkage and shift lever for damage or misalignment, inspect for worn clutch plates, check for hydraulic pressure loss inside the powershift clutch pack, and confirm the forward/reverse shift solenoid isn't stuck or miswired. Broader forum discussion of Cat's direct-drive powershift architecture (which the K series carries forward from the H series) describes intermittent slip-to-neutral behavior traced to an individual clutch solenoid or the valve spool underneath it, and cautions that swapping only the solenoid coil without checking the spool can mask the real fault and cause a repeat failure. Because unexpected loss of drive (or unexpected re-engagement) on a machine this size is a safety issue, have your dealer verify clutch pack pressures and solenoid/valve-spool condition before returning the grader to service.

Q: What hydraulic issues come up most with the 140K's wheel lean, articulation, and blade circuits?

The 140K uses a load-sensing hydraulic circuit (Cat calls it Proportional Priority Pressure Compensating, or PPPC) for blade, wheel-lean, and articulation functions, with an independent hydraulic oil supply intended to limit cross-contamination and heat buildup compared with sharing oil across systems. Field guidance is consistent across sources: sluggish or spongy blade/wheel-lean/articulation response, or unusual pump noise, most often points to low fluid level, a failing pressure compensator, or contaminated oil - contamination is cited industry-wide as the leading cause behind hydraulic cylinder and pump failures. A repeated inspection tip from grader-buying guides is to check the ground under the machine and around the wheel-lean and articulation cylinder rod seals for staining or dirt buildup rather than relying on a visual check of the cylinder alone, since a slow rod-seal leak often shows there first. Because a failed wheel-lean or articulation cylinder can cause sudden unexpected machine movement, have your dealer verify cylinder seal condition and system pressure before relying on the machine for road work.

Q: What undercarriage and wear-component patterns are typical for the 140K's circle, moldboard, and tandems?

Consensus across Cat's own maintenance guidance and independent grader-inspection write-ups: the one-piece forged circle and its nylon composite wear inserts/shims are the first thing to check for play - if shims have been added to keep the circle tight, cycle it through full range of motion to confirm no play remains, since an out-of-adjustment circle accelerates uneven wear on the circle and pinion teeth. The moldboard itself rides on sacrificial brass slide-rail wear strips designed to be adjusted or replaced so the moldboard and drawbar don't wear directly; a cutting edge worn down to roughly half its original thickness is the commonly cited point to replace it. Tandem cases, wheel motors, and articulation/pivot pins are flagged as the other high-wear items, particularly on machines that worked rough or rocky terrain rather than finish grading, since irregular terrain measurably accelerates undercarriage wear. Standard tire fitment on the 140K is 17.5-25.

Q: What electrical and sensor problems show up on the 140K, and is there a lesson for troubleshooting?

A documented 140K case showed multiple simultaneous-looking fault codes (low system air pressure, user-defined shutdown, and engine overspeed) that all traced back to one root cause: the alternator was charging far above normal, around 34V instead of the typical 13.5-14.5V range, which cascaded into unrelated-looking faults across the machine's electrical system rather than pointing cleanly at one component. The practical lesson the community draws from this is that when a 140K throws several seemingly unrelated fault codes at once, checking charging-system output voltage early can save a lot of diagnostic time chasing individual codes. Sustained overvoltage risks damaging the ECM and other control modules and creates a battery-venting/fire risk, so have your dealer verify charging system output and replace the alternator and/or regulator rather than attempting a field workaround.

Q: How does the 140K differ from the 140H and 140M, and does that matter for parts/support?

Community sources describe the 140K as a relatively short-lived, transitional generation - introduced to replace the 140H, then itself superseded fairly quickly by the M series - and note it was primarily marketed outside North America. Within the K line, the 140K2 (sold in markets like India) is described as mechanically the same C7 ACERT platform simply calibrated to a lower emissions tier (Tier 2/Stage II equivalent) for that market, not a different engine. Practical implication raised by owners: because the K series had a shorter production run and narrower geographic footprint than the H or M, used-market volume, parts availability, and dealer technician familiarity can vary more by region than they do for the more common H or M series machines - worth confirming with a local dealer before buying if you're outside the markets where the K was primarily sold.

Q: What should a buyer physically check before purchasing a used 140K?

Cross-referencing multiple grader-buying and inspection guides (Cat and independent), the recurring checklist is: (1) cycle the circle through full range of motion and check for play, since a shimmed but still-loose circle causes uneven pinion/circle-teeth wear; (2) measure remaining moldboard cutting-edge thickness and check that the blade is straight rather than cupped in the center; (3) look under and around the machine, engine compartment, and circle-drive housing for hydraulic staining before assuming hoses and cylinders are dry; (4) check the articulation joint and wheel-lean cylinders for play or seal leakage, and confirm the cab sits level with the engine compartment - a height mismatch can indicate a bent or loose articulation point or frame damage from tires being turned and leaned under load; (5) inspect tires, and check tandem cases, wheel motors, and pivot points for wear consistent with the terrain the machine reportedly worked; (6) pull service/hour records and compare against visible wear to sanity-check the hour meter. Given the safety implications of a compromised articulation joint or frame, have your dealer perform a full pre-purchase inspection and verify structural and hydraulic condition before finalizing any purchase.

Maintenance schedule, common problems & OEM parts breakdown

Search live 140K parts

The Caterpillar 140K is a mid-size articulated motor grader in the roughly 17.3-22.9 tonne (38,100-50,420 lb) operating-weight class, depending on counterweight, tire, and drive configuration. It is powered by a Cat C7 ACERT six-cylinder diesel rated in the region of 128-155 kW (about 171-208 hp) through Caterpillar's variable horsepower (VHP) system, which automatically manages power by gear to cut fuel use and tire slip, paired with a direct-drive powershift transmission offering eight forward and six reverse speeds. Introduced as part of Caterpillar's K Series line (alongside the 12K, 120K, and 160K) to replace the 140H, the 140K was built primarily to Tier 2/Stage II emissions calibration for markets outside North America and the EU, though some units were configured to Tier 3/Stage IIIA equivalence. Buyers could specify standard rear-tandem drive or optional all-wheel drive, lever-and-steering-wheel or joystick controls, and a roughly 3.7 m (12 ft) moldboard, with a later 140K2 revision carrying the same platform forward with updated emissions calibration.

Relative to the 140H it replaced, the K Series added ACERT engine technology for an 8-10% torque increase, automatic variable-horsepower derating for fuel economy, and grouped, ground-level service points meant to shorten downtime between checks. The 140K2 that followed changed engine calibration and controls rather than the core driveline, keeping the same circle, drawbar, tandem, and hydraulic architecture shared across the 140H/140K/140M family. Because Caterpillar sold the 140K mainly into road-building, mining-support, and municipal grading fleets across Africa, the Middle East, Asia, and Latin America rather than North America, used units surface steadily in those regions today (South Africa in particular, where reconditioning specialists rebuild 140G/140H/140K graders as lower-cost alternatives to new machines). That shared-platform lineage is also why the 140K remains relevant in the parts market: its circle, drawbar, moldboard, and hydraulic wear components largely interchange with adjacent 140-family generations, so parts sourcing and rebuild economics stay favorable even as Cat's newer 140 GC and 140M-series graders take over new-machine sales.

Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.

Caterpillar 140K specifications

Engine

Engine model	Cat C7 ACERT, 6-cylinder diesel (in-line)
Gross power (top gear range)	155 kW (208 hp)
Net power (variable horsepower, gears 1 through 4-8 range)	128-143 kW (171-191 hp), varies by gear/VHP range per source
Displacement	7.2 L (439 cu in)
Bore x stroke	105 mm x 127 mm (4.1 in x 5.0 in)
Maximum torque	996 Nm (735 lb-ft) at 1,000 rpm
Emissions tier	U.S. EPA Tier 3 / EU Stage IIIA, or equivalent Tier 2/Stage II depending on regional regulations

Weights

Standard/typical operating weight	approx. 17,271-17,510 kg (38,075-38,600 lb); figure varies slightly by source and tire/counterweight configuration
Front axle load (standard configuration)	approx. 4,936 kg (10,882 lb)
Rear axle load (standard configuration)	approx. 12,335 kg (27,193 lb)
Maximum configured weight (full counterweight/attachments)	approx. 22,870 kg (50,420 lb)
Shipping weight	not separately published by sources reviewed
Ground pressure	not published by sources reviewed (not typically published for wheeled motor graders)

Dimensions

Overall/transport length (front tire to rear of machine)	approx. 8.5 m (8,504 mm) / 27 ft 11 in
Width (outside rear tires)	approx. 2.45-2.48 m / 8 ft 0-1 in, varies slightly by source
Height (to top of cab/exhaust)	approx. 3.35 m (3,354 mm) / 11 ft
Wheelbase (front axle to mid-tandem)	approx. 6.07 m (6,068 mm) / 19 ft 11 in
Ground clearance (center of front axle)	approx. 626 mm / 24.6 in
Outside turning radius	approx. 7.5 m / 24 ft 7 in
Circle diameter	approx. 1,530 mm / 60.2 in

Performance

Maximum forward travel speed	47.3 km/h (29.4 mph)
Maximum reverse travel speed	approx. 37.4 km/h (23.2 mph), single-source figure
Transmission	direct-drive powershift, electronically controlled, 8 forward / 6 reverse speeds; optional autoshift
Moldboard (blade) width	approx. 3.7 m (12 ft)
Moldboard (blade) height	approx. 610 mm (24 in)
Maximum blade lift above ground	approx. 480 mm (18.9 in)
Maximum digging depth	approx. 735 mm (28.9 in)
Gradeability	not published by sources reviewed (not typically published for this machine class)

Service capacities (summary)

Fuel tank	approx. 305 L (80.6 US gal)
Engine oil	approx. 18 L (4.8 US gal)
Cooling system	approx. 40 L (10.6 US gal)
Hydraulic system (reservoir)	approx. 55 L (14.5 US gal), single-source figure
Optional high-flow hydraulic pump output	approx. 210 L/min (55.5 US gal/min), flow rate not reservoir volume

Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.

140K fluids & capacities

System	Capacity	Recommended fluid
Engine crankcase (with filter)	18 L (4.8 US gal)	Cat DEO or Cat DEO-ULS Diesel Engine Oil (meets Cat ECF-1-a/ECF-2/ECF-3); SAE 10W-30 is the preferred grade for the C7 engine between -18C/0F and 40C/104F ambient, SAE 15W-40 for -9.5C/15F to 50C/122F
Cooling system	40 L (10.6 US gal)	Cat ELC (Extended Life Coolant), 1:1 premix gives freeze protection to -37C/-34F; ELC concentrate can be blended down to -52C/-62F for arctic use. Cat DEAC conventional antifreeze is an acceptable alternative but needs periodic SCA treatment. Factory/standard spec references protection to -35C/-30F
Fuel tank	305 L (80.6 US gal)	Ultra-low sulfur diesel (ULSD, <=15 ppm sulfur) meeting the Cat distillate diesel fuel specification; the C7 ACERT engine on this series predates DEF/SCR aftertreatment so no diesel exhaust fluid is used
Transmission, differential and final drive (combined powertrain compartment)	60 L (15.9 US gal); varies by configuration/series	Cat TDTO (Transmission/Drive Train Oil), meets Cat TO-4 spec; viscosity by climate - SAE 10W (-30C to 0C), SAE 30 (-20C to 25C / -4F to 77F) for typical temperate operation, up to SAE 50 (-15C to 50C / 5F to 122F) for hot climates
Tandem (final drive) housings, each side	64 L (16.9 US gal) per side; varies by configuration/series	Cat TDTO (TO-4 spec), same climate-based viscosity guidance as the transmission/differential compartment (SAE 10W/30/50 depending on ambient temperature)
Circle drive housing	7 L (1.8-1.9 US gal)	Cat GO (Gear Oil), API GL-5 equivalent - not the same fluid as the TDTO used elsewhere in the driveline; SAE 85W-140 for warmer climates (-10C to 50C / 14F to 122F) down to SAE 75W-90 for cold climates (-30C to 40C / -22F to 104F)
Front wheel spindle bearing housing, each side	0.5 L (0.13 US gal) per side	Cat's live-spindle front axle design is factory-sealed and lubricated with a lightweight oil; consult the machine-specific OMM refill table for the exact grade, as the general Cat fluids guide does not call out a distinct spec for this compartment
Hydraulic system and tank	55 L (14.5 US gal) reservoir tank capacity	Cat HYDO Advanced 10 (SAE 10W) is preferred for ambient -20C to 40C (-4F to 104F); acceptable alternates across a wider viscosity band (SAE 0W-20 through SAE 15W-40) include Cat HYDO, Cat MTO, Cat DEO/DEO-ULS and Cat TDTO depending on climate
Grease (chassis lubrication points, spec only)	not applicable - refilled per grease point, not a bulk system	Cat Multipurpose Grease (NLGI 2, lithium complex) for low-load chassis points; Cat Advanced 3Moly Grease (NLGI 2, 3% MoS2, lithium complex) for medium-load pin joints such as fan drive bearings; Cat Ultra 5Moly Grease (NLGI 1, 5% MoS2, calcium sulfonate complex) for high-load articulation bearings/pins and blade lift/centershift cylinder pins, effective to about -35C/-31F

Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.

Caterpillar 140K maintenance schedule

Service interval	Tasks
Every 50 h	Check engine oil, coolant, and hydraulic tank levels and inspect for leaks around the C7 ACERT engine, load-sensing pump, and lift/tilt cylinders before start-up Grease the circle drive, drawbar ball-and-socket, articulation joint, and blade lift linkage pins Inspect the moldboard cutting edge, end bits, and nylon composite circle wear inserts for wear or chipping Drain water and sediment from the fuel water separator and check the primary air filter restriction indicator Check tire condition/pressure and tandem case oil sight glass, and test lights, back-up alarm, and seat belt
Every 250 h	Take engine oil, hydraulic oil, and tandem/differential oil samples for S·O·S fluid analysis Grease all circle, drawbar, articulation, and steering cylinder pivot points on the extended schedule Check transmission (powershift) oil level and inspect for slip or shift-quality changes Inspect service brakes on each tandem, parking brake, and wheel bearing preload Clean or replace the cab air filter and check battery terminals and charge state Inspect the circle drive slip clutch and drawbar shoes/wear strips for shock-load damage
Every 500 h	Change engine oil and oil filter on the C7 ACERT (500-hour factory interval for K Series graders) Replace primary and secondary fuel filters and the hydraulic filter element Check and adjust circle-to-drawbar wear plate clearance and torque wheel/rim nuts Sample coolant condition and inspect the variable-speed hydraulic fan drive and radiator core for debris packing Service the air conditioning system and inspect hoses, belts, and the alternator/starter wiring Re-torque tandem case and final drive housing bolts
Every 1,000 h	Change tandem case and differential/bevel gear oil in the rear drive housings Change powershift transmission oil and filter, and inspect clutch pack wear via oil analysis trending Replace the primary engine air filter element and inspect the turbocharger for shaft play or oil leakage Inspect articulation ball-and-socket, drawbar center hinge, and tie-rod/king-pin bushings on AWD-equipped units for play Check circle gear mesh and backlash, and inspect the moldboard brass slide rails for adjustment or replacement Pressure-test the load-sensing hydraulic circuit and inspect steering and lift cylinder rod seals for weeping
Every 2,000 h	Sample and evaluate hydraulic oil condition ahead of the full-change interval and inspect the hydraulic tank breather/strainer Inspect the direct-drive powershift transmission housing, driveshafts, and universal joints for wear Inspect and reseat the circle drive slip clutch, ring gear teeth, and drawbar wear shoes Check engine mounts, front axle pivot pin and bushings, and wheel lean cylinder for excess play Re-evaluate cooling system hoses, clamps, and the hydraulically-driven fan motor for the next service cycle
Every 3,000 h	Adjust engine valve lash clearance on the C7 ACERT cylinder head Inspect fuel injectors and injection timing as part of the mid-life engine top-end check Inspect turbocharger compressor and turbine wheel clearance
Every 4,000 h	Change hydraulic tank oil (Cat HYDO/TDTO-spec fluid) across the load-sensing circuit, lift, tilt, and steering cylinders Flush and replace the hydraulic return filter housing Inspect hydraulic pump and motor case-drain flow as part of the full fluid renewal
Every 12,000 h	Change engine coolant (Cat ELC Extended Life Coolant) and flush the cooling system Inspect water pump, radiator core, and hoses for age-related deterioration at the extended coolant interval

Servicing the 140K beyond the schedule

Predictive Maintenance & Fluid Analysis

Run S·O·S oil sampling on the Cat C7 ACERT engine, the load-sensing hydraulic circuit, and the powershift transmission to catch bearing and clutch-pack wear before it reaches the circle drive or drawbar. Tandem case and differential oil samples flag gear and bearing degradation early, since the 140K's rear-drive housings carry the grading loads. Trend hydraulic oil cleanliness closely given the load-sensing pump's tight tolerances, and track coolant condition against the extended-life coolant interval to avoid premature radiator or water pump failure.

Corrective & Common Repairs

Typical 140K repairs center on the grading end: moldboard cutting edges, end bits, brass slide rails, and nylon composite circle wear inserts wear fastest and are routinely replaced rather than rebuilt. The circle drive slip clutch is designed to slip under shock loads, so repeated blade strikes on buried obstacles often mean clutch resets or drawbar shoe adjustment. Blade lift and tilt cylinder rod seals, articulation joint bushings, and AWD tie-rod/king-pin wear are the other recurring corrective items on higher-hour machines.

Overhaul & Rebuild Points

At major overhaul, the tandem case housings, chains or gear sets, and final drive bearings are the biggest-ticket rebuild items on the 140K given how much of the machine's operating weight and traction load they carry. Powershift transmission clutch packs, the circle gear and drawbar wear plates, and the C7 ACERT top end (injectors, turbocharger, cylinder head) are the other common rebuild points once hours accumulate. Because the driveline shares design lineage with the 140H and 140M, rebuild kits and wear components are broadly interchangeable across those generations.

Seasonal & Environment Servicing

Most 140K units work in hot, dusty road-building and mining-support environments across Africa, the Middle East, and Asia, so primary air filter service and radiator/hydraulic fan core cleaning need to run more frequently than the base interval in heavy dust. The variable-speed hydraulic fan should be checked for debris packing behind the core, and cab air filters and A/C service kept current for operator comfort in high heat. In the fewer cold-climate deployments, verify Cat ELC coolant concentration and check batteries and glow/start-aid systems ahead of winter.

140K common service parts

Part number	Part	Notes
220-8678	Seal-Ring	Fuel system service	Check fitment →
326-1644	Filter As-Water Sep & Fuel	Fuel system service	Check fitment →
1R-0762	Filter As-Fuel	Fuel system service	Check fitment →
245-6375	Filter Element-Air	Air intake service	Check fitment →
245-6376	Filter Element As-Air	Air intake service	Check fitment →

Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.

140K fault codes & troubleshooting

Code	Meaning	Likely cause	What to do
100-1 (CID 100 / SPN 100, FMI 1)	Engine oil pressure below normal range for the current engine speed	Low oil level, degraded or aerated oil, a worn oil pump or clogged filter, or a faulty oil pressure sensor/wiring	Check engine oil level and condition first, then inspect the oil pressure sensor wiring and connector before condemning the pump
110-0 (CID 110 / SPN 110, FMI 0)	Engine coolant temperature above the normal operating range (most severe FMI for this parameter, tied to overheat shutdown/derate events)	Low coolant level, a debris-blocked radiator or reversing fan screen, a stuck thermostat, or a failed coolant temperature sensor	Check coolant level and radiator core/screen for debris before testing the coolant temperature sensor circuit; treat as urgent given risk of engine damage if ignored
168-0/1/2 (CID 168 / SPN 168, System Voltage)	Battery/charging system voltage abnormal - confirmed as high (FMI 0), low (FMI 1), or intermittent/erratic (FMI 2) across independent C7 references	Weak or failing battery, corroded/loose battery or ground cable connections, or a failing alternator/voltage regulator	Load-test the battery, clean and tighten all battery and ground connections, then check charging voltage at the alternator output
102-3/4/7 (CID 102 / SPN 102, Boost Pressure)	Turbocharger boost (intake manifold) pressure sensor circuit open (FMI 3), short (FMI 4), or boost not responding to commanded level (FMI 7)	Charge-air piping leak, restricted or dirty air filter, a sticking wastegate or clogged wastegate vent line, or a faulty boost pressure sensor/wiring	Inspect the air intake system and charge-air cooler piping for leaks and check air filter restriction before testing the boost sensor circuit or wastegate actuator
164-2 (CID 164 / SPN 164, Injection Actuation Pressure)	HEUI injection actuation (high-pressure engine oil) pressure signal erratic, or actual pressure not tracking the ECM-commanded value; confirmed the C7 ACERT uses a hydraulically actuated, electronically controlled unit injector (HEUI) fuel system rather than a common-rail system	Aerated or incorrect engine oil level, a leaking injector O-ring, a worn high-pressure oil pump, or a faulty injection actuation pressure sensor	Check engine oil level and condition, inspect the IAP sensor wiring, then run an injector/actuation pressure test with Cat Electronic Technician (Cat ET)
247-9 (CID 247 / SPN 639, CAT Data Link / J1939)	Abnormal update rate or loss of communication on the CAT Data Link (CDL)/J1939 network between the engine ECM and other machine controllers; commonly appears as a companion code alongside another ECM's communication-related fault	Damaged, corroded, or poorly terminated data link wiring/connectors, a powered-down or faulted ECM elsewhere on the network, or a bad termination resistor	Inspect the CAT data link harness and connectors for damage/corrosion, verify data link termination resistance, and confirm all ECMs are powered and communicating
1-5/1-6 through 6-5/6-6 (CID 1-6, Cylinder Injector Solenoid, FMI 5 open / FMI 6 short)	Injector solenoid circuit open (FMI 5) or short (FMI 6) for the numbered cylinder	Damaged injector wiring harness or connector at the valve cover, a failed injector solenoid, or an ECM driver fault; because two injector solenoids share a supply wire, a single wiring fault can trigger paired codes on two cylinders	Run the injector solenoid test in Cat ET to isolate the affected cylinder(s) as OK, open, or short, then inspect harness and connectors before replacing the injector

Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.

140K attachments & work tools

Moldboard (grading blade)

The 140K's standard moldboard measures roughly 3.7 m (12 ft) long by 610 mm (24 in) high, with about 413 mm arc radius and 120 mm throat clearance; parts suppliers also list a 4.27 m x 610 mm x 22 mm (14 ft x 24 in x 7/8 in) moldboard cross-compatible with the 140K and related 140-series graders. Cat also offers bolt-on moldboard extensions adding up to about 605 mm (24 in) of extra road coverage, and curved or flat cutting edges in multiple widths (commonly 152-203 mm) with hardened end bits protecting the moldboard tips.

Front blade / dozer blade

A front-mounted dozer-style blade, offered in standard or hydraulically tiltable form, can be fitted to the 140K's nose through the front lift group for dozing, material pushing, or snow work; the tiltable version adds a pair of tilt cylinders for cross-slope control. This front blade is also commonly used together with a rear ripper as a counterbalance arrangement.

Rear ripper

An optional hydraulic rear-mounted ripper attaches behind the tandem, offering multiple shank positions spaced roughly 533 mm apart for a maximum penetration depth near 462 mm, with penetration force around 8.7 tonnes and pryout force around 11.7 tonnes (varies by configuration/source). It operates off an auxiliary hydraulic valve and plumbing kit added to the base grader circuit, not the standard blade hydraulics.

Scarifiers (mid-mount, rear, and front)

A mid-mount V-type scarifier (roughly 1.18 m wide, up to about 229 mm depth) sits ahead of the moldboard for better cut-depth control and visibility, while a wider rear scarifier (roughly 2.3 m wide, up to about 266 mm depth) mounts at the back for heavier compacted-material or asphalt breaking; a lighter front-mount scarifier is also offered for shoulder/road-maintenance duty. Rear and central positions require their own auxiliary hydraulic valve arrangement in addition to the shank group itself.

Snow wing

Cat offers both masted and mastless snow-wing attachments sized for the 140/140K grader class: masted wings are suited to throwing deeply drifted snow well clear of the road, while mastless wings improve operator sightlines and can bench snow to roughly 1 m (40 in) high. Both wing types require an added snow-wing hydraulic valve arrangement beyond the base machine circuit.

Front snowplow / V-plow

A straight snowplow blade or V-plow can be mounted to the front lift group for dedicated snow-clearing passes, and is commonly run in combination with the main moldboard and a snow wing for full shoulder-to-shoulder clearing on the same pass.

Push block / counterweight

A push block mounts to the grader's front nose plate to counterbalance the added weight of a rear ripper and to provide a protected push point when the grader is used to assist scrapers or other machines; it is typically specified alongside rear ripper installations.

Front lift group (mounting system)

Front-mounted work tools (dozer blade, scarifier, snowplow) attach via a bolt-on/pinned front lift group with its own lift cylinder rather than a hydraulic quick-coupler of the excavator/loader type. The main moldboard itself rides on the grader's standard circle-and-drawbar with clamped, bolt-on cutting edges and end bits, not a detachable coupler system.

Fenders and guarding

Rear fenders are available to limit mud, snow, and debris buildup around the tandems, and transmission guarding is offered (factory or aftermarket) to protect the underside driveline when grading or ripping over rock and debris.

Auxiliary hydraulics / kit arrangement

Work tools beyond the base moldboard lift/tilt/angle circuit (rear ripper, central or rear scarifier, front dozer blade, snowplow, snow wing) each require one or more additional hydraulic valve sections added to the 140K's standard load-sensing hydraulic system. A higher-capacity hydraulic pump option, cited around 210 L/min (55.7 US gal/min), is available on the 140K to support running multiple auxiliary circuits together.

Grade-control / guidance option

Cat AccuGrade (ARO-type) grade-control provisioning and Product Link telematics are dealer- or factory-installable options on the 140K that integrate with the standard moldboard lift/tilt circuit; they are guidance/technology add-ons rather than ground-engaging work tools.

Cab/ROPS configuration

The 140K is offered with ROPS or non-ROPS cab structures, an optional ROPS roof, and a choice of seating and climate packages (heater, or heat/AC); these are structural and comfort configurations rather than work tools but are relevant factory options for this class of grader.

All 140K assemblies by section

Every catalogued assembly group for the Caterpillar 140K. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.

Air Inlet And Exhaust System

299-8311 Aftercooler Gp-Air

03***48	Clip; (11.11mm .437in Id)	4
19***76	Washer-Hard; (8.8x20x8-mm Thk)	4
19***77	Washer-Hard; (11x25x10-mm Thk)	3
1S***94	Clip-R.H. Side Engine Support	1

See all parts with full part numbers in Heavy Parts AI →

264-3762 Air Cleaner Gp

12***07	Mount As-Resilient	4
24***63	Aftercooler As	1
26***62	Air Cleaner Group	1
31***38	Plate As	1

See all parts with full part numbers in Heavy Parts AI →

310-6459 Air Cleaner Gp

21***81	Cover As	1
24***75	Filter Element-Air; (Primary)	1
24***76	Filter Element As-Air; (Secondary)	1
24***15	Bracket As	2

See all parts with full part numbers in Heavy Parts AI →

153-1794 Cover Gp-Air Inlet

09***49	Bolt; (M8x1.25x40-mm)	4
11***23	Fitting	1
15***58	Tee As	1
15***94	Cover Group-Air Inlet; -Engine	1

See all parts with full part numbers in Heavy Parts AI →

322-0245 Elbow Gp-Air Inlet

1U***46	Sealant (For Locations A)	0
20***69	Cover-Air Inlet	1
32***45	Elbow Group-Air Inlet	1
3K***60	Seal Pilot Manifold On; Seal To Boom Check Valve Drain	2

See all parts with full part numbers in Heavy Parts AI →

311-0864 Lines Gp-Aftercooler Air

12***11	Stud; (M8x1.25-Thd)(M8x1.25 Thd Both Ends)	4
16***77	Plug As	1
19***16	Elbow	1
1U***46	Sealant (For Locations A)	1

See all parts with full part numbers in Heavy Parts AI →

183-6845 Manifold Gp-Exhaust

17***81	Hose	2
18***45	Manifold Group-Exhaust; -Dry	1
20***78	Clamp-Tbolt	8
24***02	Hose-Elbow	1

See all parts with full part numbers in Heavy Parts AI →

310-6472 Muffler Gp

17***98	Bolt-Flange Head; (M10x1.5-Thd)	8
18***54	Manifold-Exhaust; (Center)	1
18***56	Manifold-Exhaust; (End)	2
18***72	Spacer; (11x16x35-mm Thk)	8

See all parts with full part numbers in Heavy Parts AI →

338-1878 Turbocharger Gp

19***77	Washer-Hard; (11x25x10-mm Thk)	6
1W***31	Clamp-Band; -Turbo Exhaust-Exhaust	1
31***42	Tube As	1
31***06	Plate	1

See all parts with full part numbers in Heavy Parts AI →

352-2396 Turbocharger Gp

00***08	Setscrew-Socket; (3/8-16x0.5-In)	1
11***10	Grommet	1
12***73	Bolt-12 Point Head; (3/8-16x1.25-In)(3/8-16thd)	1
13***00	Clip; (Tab)	1

See all parts with full part numbers in Heavy Parts AI →

340-1812 Turbocharger Gp

13***02	Clamp As; (Turbine)(Turbine)	1
15***72	Clamp As; (Compressor)	1
16***63	Clamp	2
24***60	Hose; (63-cm)(Wastegate)	0

See all parts with full part numbers in Heavy Parts AI →

Basic Engine

313-2656 Air Compressor Gp

11***43	Cooler Group-Engine Oil	1
16***46	Housing Group-Front	1
19***61	Lines Group-Injector Hydraulic Pump	1
20***21	Gear Group-Front, Name-Plate (Norwegian)	1

See all parts with full part numbers in Heavy Parts AI →

314-6148 Air Compressor Gp

12***47	Elbow	1
13***19	Seal-Integral; (Integral)	1
14***49	Hose As	1
14***21	Spacer; (10.5x14.5x25-mm Thk)	1

See all parts with full part numbers in Heavy Parts AI →

212-4289 Camshaft Gp

19***17	Bolt; (M10x1.5x115-mm)	6
21***89	Camshaft Group	1
22***61	Gear; (50-Teeth)	1
26***12	Ring-Retaining	2

See all parts with full part numbers in Heavy Parts AI →

4w-3462 Carrier Gp-Seal

10***94	Plate-Thrust	1
1B***05	Key; (Woodruff)	1
21***88	Camshaft As	1
22***47	Gear; (100-Teeth)	1

See all parts with full part numbers in Heavy Parts AI →

229-8841 Cover Gp-Cylinder Block

22***41	Cover Group-Cylinder Block	1
23***83	Gasket	1
24***76	Seal	1
2W***46	Cover	1

See all parts with full part numbers in Heavy Parts AI →

118-1727 Cover Gp-Front Housing

11***18	Bolt As; (M8x1.25x16-mm)	4
11***27	Cover Group-Front Housing; -Accessory Drive	1
1U***46	Sealant (For Locations A)	0
21***21	Stud; (M8x1.25-Thd)	1

See all parts with full part numbers in Heavy Parts AI →

275-0595 Cover Gp-Front Housing

13***19	Seal-Integral; (Integral)	1
27***95	Cover Group-Front Housing	1
4W***26	Cover	1
5P***45	Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate)	4

See all parts with full part numbers in Heavy Parts AI →

307-1735 Cover Gp-Valve Mechanism

06***55	Seal-O-Ring (Id=47.22mm)	1
10***12	Spacer; (11.13x19.05x53-mm Thk)	1
12***57	Washer; (10.85x19.3x1.27-mm Thk)	2
13***22	Stud	2

See all parts with full part numbers in Heavy Parts AI →

210-5590 Crankshaft Gp

09***49	Bolt; (M8x1.25x40-mm)	13
21***90	Crankshaft Group	1
24***96	Cover As-Base	1
27***88	Seal-Valve Cover; (Valve Mechanism Base)	1

See all parts with full part numbers in Heavy Parts AI →

305-8141 Cylinder Block Gp

30***41	Cylinder Block Group	1
5P***47	Washer (Bracket To Valve Support)	14
7E***68	Cap-Crankshaft Bearing	7
9X***16	Bolt; (M16x2.0x140mm)	14

See all parts with full part numbers in Heavy Parts AI →

263-3774 Cylinder Block Gp

1W***07	Sleeve	2
26***74	Cylinder Block Group	1
30***41	Cylinder Block Group	1
6V***38	Dowel; (9.55mm Dia X 20mm Oal)	2

See all parts with full part numbers in Heavy Parts AI →

221-4482 Cylinder Block Gp

10***08	Bearing-Main; (Standard)	6
14***62	Bearing; (0.25mm Undersize)	0
14***64	Bearing; (0.5mm Undersize)	0
14***68	Bearing-Main; (0.5-mm Os)	0

See all parts with full part numbers in Heavy Parts AI →

219-5844 Cylinder Head As

10***04	Sleeve-Cylinder	0
21***86	Bearing-Sleeve; (Camshaft)	1
21***44	Cylinder Head As	1
26***74	Cylinder Block Group	1

See all parts with full part numbers in Heavy Parts AI →

219-5849 Cylinder Head Gp

1N***99	Plug-O-Ring; (Straight Thread)	2
21***46	Cylinder Head Group	1
21***49	Cylinder Head Group	1
2M***80	Seal--To Connector Pump Outlet	1

See all parts with full part numbers in Heavy Parts AI →

219-5846 Cylinder Head Gp

14***18	Insert-Valve Seat; (Exhaust, Standard)	6
21***13	Insert-Valve Seat; (Standard, Inlet)	12
21***46	Cylinder Head Group	1
22***00	Sleeve-Injector	6

See all parts with full part numbers in Heavy Parts AI →

219-5847 Cylinder Head Gp

13***83	Retainer-Spring	6
13***15	Seat-Valve Spring	6
13***18	Spring-Valve; (Exhaust)	6
14***88	Spring-Valve; (Inlet)	12

See all parts with full part numbers in Heavy Parts AI →

194-5128 Damper & Pulley Gp

13***95	Gasket-Cylinder Head	1
13***52	Bolt-12 Point Head; (M20x2.5x170mm)	1
14***89	Fastener Group-Cylinder Head	14
19***28	Damper & Pulley Group	1

See all parts with full part numbers in Heavy Parts AI →

250-8309 Damper & Pulley Gp

16***21	Damper Assem.	1
17***67	Pulley-Crankshaft	1
19***27	Yoke	1
25***09	Damper & Pulley Group	1

See all parts with full part numbers in Heavy Parts AI →

313-4384 Drive Gp-Accessory

16***21	Damper Assem.	1
17***67	Pulley-Crankshaft	1
22***21	Spacer; (101.5x167x8-mm Thk)	1
2W***81	Plate-Clamp; (Pulley Clamp)	1

See all parts with full part numbers in Heavy Parts AI →

7c-8365 Drive Gp-Fan

12***92	Pulley As-Idler; (8-Groove)	1
14***01	Cover-Dust; (Rear)	1
22***09	Belt Tensioner	1
22***66	Plate-Lifting; (Front)	1

See all parts with full part numbers in Heavy Parts AI →

318-9471 Drive Gp-Fan

31***71	Drive Group-Fan	1
4W***03	Cup-Roller Bearing	2
4W***04	Cone-Roller Bearing	2
4W***42	Spacer; (35.3x45.5x38.331-mm Thk)	1

See all parts with full part numbers in Heavy Parts AI →

258-8723 Fastener Gp-Cylinder Head

10***79	Pulley; (3-Groove)	1
25***23	Fastener Group-Cylinder Head; -Valve Cover Base	1
27***62	Adapter-Fan	1
29***36	Support As	1

See all parts with full part numbers in Heavy Parts AI →

322-0246 Fastener Gp-Engine

22***44	Clip	3
24***00	Spring	11
32***46	Fastener Group-Engine	1
8T***00	Bolt (M8x1.25x60mm); (M8x1.25x60-mm)	11

See all parts with full part numbers in Heavy Parts AI →

116-4556 Fastener Gp-Front Housing

11***56	Fastener Group-Front Housing; (Housing)	1
6V***17	Bolt; (M8x1.25x30-mm)(Location Z)	4
6V***18	Bolt (M8x1.25x45mm); (M8x1.25x35-mm)	2
6V***37	Bolt; (Socket Head) (M8x1.25x35mm)	1

See all parts with full part numbers in Heavy Parts AI →

275-8387 Flywheel Gp

27***87	Flywheel Group	1
5P***45	Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate)	6
6V***36	Bolt; (M12x1.75x70-mm)	6

See all parts with full part numbers in Heavy Parts AI →

205-1321 Gear Gp-Front

20***21	Gear Group-Front, Name-Plate (Norwegian)	1
31***10	Flywheel As	1
3E***13	Pin-Spring	1
5P***45	Washer-Hard; (13.5x25.5x3-mm Thk)(Turbocharger Blanking Plate)	8

See all parts with full part numbers in Heavy Parts AI →

197-5210 Housing Gp-Flywheel

11***69	Plate-Thrust	1
11***72	Bearing	1
11***19	Plate-Retaining	1
13***83	Bolt-12 Point Head; (M10x1.5x30-mm)	1

See all parts with full part numbers in Heavy Parts AI →

165-4446 Housing Gp-Front

10***51	Housing-Flywheel	1
14***08	Plug As.	1
15***24	Hex Head Plug; (-4sae) (D6r Iii)	1
16***46	Housing Group-Front	1

See all parts with full part numbers in Heavy Parts AI →

139-4081 Lifter Gp-Valve

13***81	Lifter Group-Valve; -Mechanism	1
1U***46	Sealant (For Locations A)	0
24***59	Housing-Front	1
6V***18	Bolt (M8x1.25x50mm); (M8x1.25x50-mm)	4

See all parts with full part numbers in Heavy Parts AI →

197-1876 Lifting Gp-Engine

13***84	Spacer; (15.9x24x6-mm Thk)	2
13***76	Shaft As-Lifter	1
19***76	Lifting Group-Engine	1
2D***42	Ball 6.35 mm(.25 In.)Diameter	2

See all parts with full part numbers in Heavy Parts AI →

237-9822 Lifting Gp-Engine

15***96	Plate-Lifting; (Rear)	1
22***66	Plate-Lifting; (Front)	1
23***22	Lifting Group-Engine; (Rear)	1
8T***21	Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm)	8

See all parts with full part numbers in Heavy Parts AI →

311-3542 Mounting Gp-Engine

15***96	Plate-Lifting; (Rear)	1
31***42	Mounting Group-Engine	1
8T***21	Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm)	4
8T***36	Capscrew; (Hex Hd) (M10 X 1.50 X 25l Gr 10.9)	4

See all parts with full part numbers in Heavy Parts AI →

310-6437 Mounting Gp-Engine & Xmsn

18***44	Support	2
31***37	Mounting Group-Engine & Xmsn	1
7X***10	Washer-Hard; (15.5x29x3-mm Thk)	8
8C***25	Bolt; (M14x2x35-mm)	4

See all parts with full part numbers in Heavy Parts AI →

193-6996 Pan Gp-Oil

11***70	Pan As-Oil; (Engine)	1
17***76	Bolt; (M8x1.25x19.5-mm)(M8x1.25-Thd)	36
19***96	Pan Group-Oil; -Engine	1
21***68	Seal-O-Ring; (11.89-mm Id)	1

See all parts with full part numbers in Heavy Parts AI →

193-6998 Pan Gp-Oil

16***88	Plug As-Drain; (Magnetic)(Engine Oil Pan Drain)	1
16***87	Seal-O-Ring	1
19***41	Pan As-Oil	1
19***98	Pan Group-Oil; -Engine	1

See all parts with full part numbers in Heavy Parts AI →

122-8936 Pan Gp-Oil

12***36	Pan Group-Oil; -Engine	1
17***29	Mount As	2
19***57	Mount As; (Rh)	2
19***11	Belt-Serpentine	1

See all parts with full part numbers in Heavy Parts AI →

212-3652 Piston & Rod Gp

16***05	Seal-Integral	1
17***76	Bolt; (M8x1.25x19.5-mm)(M8x1.25-Thd)	36
19***96	Pan Group-Oil; -Engine	1
21***52	Piston & Rod Group	1

See all parts with full part numbers in Heavy Parts AI →

135-2141 Plug Gp-Cylinder Block

13***41	Plug Group-Cylinder Block	1
19***21	Bolt; (Connecting Rod)	2
19***53	Ring-Piston; (Intermediate)	1
19***71	Pin-Piston	1

See all parts with full part numbers in Heavy Parts AI →

159-0303 Plug Gp-Cylinder Block

15***03	Plug Group-Cylinder Block; (Cylinder Block)	1
1S***63	Plug; (Mounted-Bottom	4

See all parts with full part numbers in Heavy Parts AI →

162-8068 Plug Gp-Engine

16***68	Plug Group-Engine; -Oil Gallery	1
3D***24	O-Ring - For Oil Drain & Level Plug (Items 3 & 7)	2
6F***62	Washer,Flat Transmission Oil Cooler	1
8T***93	Bolt; (M12x1.75x20-mm)(Shield To Turbo)	1

See all parts with full part numbers in Heavy Parts AI →

323-8959 Plug Gp-Oil Pan

14***95	Plug As	1
32***59	Plug Group-Oil Pan	1
3K***60	Seal Pilot Manifold On; Seal To Boom Check Valve Drain	1
9S***05	Plug-O-Ring; (Straight Thread O-Ring)	1

See all parts with full part numbers in Heavy Parts AI →

256-3831 Rocker Arm Gp -Exhaust

14***11	Plug Group	1
25***31	Rocker Arm Group; -Exhaust	1
3K***60	Seal Pilot Manifold On; Seal To Boom Check Valve Drain	1
9S***85	Plug--To Seal Hydraulic Pump To Sump Of Limit System	1

See all parts with full part numbers in Heavy Parts AI →

256-3834 Rocker Arm Gp -Inlet

25***32	Rocker Arm As; (Exhaust)	1
25***34	Rocker Arm Group; -Inlet	1
26***24	Screw-Valve Adjustment; (M10x1.5-Thd)	1
2Y***29	Nut-Hard; (M10 X 1.5)	1

See all parts with full part numbers in Heavy Parts AI →

7e-7590 Seal Gp-Crankshaft

25***35	Rocker Arm As; (Inlet)	1
26***24	Screw-Valve Adjustment; (M10x1.5-Thd)	1
2Y***29	Nut-Hard; (M10 X 1.5)	1
7E***90	Seal Group-Crankshaft; Crankshaft Seal Group	1

See all parts with full part numbers in Heavy Parts AI →

232-3717 Valve Mechanism Gp

13***79	Rod-Valve Push; (Valve Push)	12
13***81	Lifter Group-Valve; -Mechanism	3
21***09	Bridge-Valve	6
23***54	Clip	1

See all parts with full part numbers in Heavy Parts AI →

235-5528 Valve Mechanism Gp

13***81	Lifter Group-Valve; -Mechanism	3
21***09	Bridge-Valve	6
23***54	Clip	1
23***28	Valve Mechanism Group	1

See all parts with full part numbers in Heavy Parts AI →

256-3830 Valve Mechanism Gp

13***17	Spring	5
13***98	Shaft Assem.	1
13***02	Stand; (End)	1
13***03	Stand; (End)	1

See all parts with full part numbers in Heavy Parts AI →

Braking System

215-3005 Air Dryer Gp

21***05	Air Dryer Group	1
30***77	Harness As-Wiring	1
31***38	Dryer & Lines Group-Air	1
9W***42	Fuse; (10-Ampere)	1

See all parts with full part numbers in Heavy Parts AI →

311-2737 Air Dryer Gp

1P***21	Yoke	1
20***57	Seal	1
20***58	Seal	1
2J***74	Seal-O-Ring; 9.12mm(.36in) Id	1

See all parts with full part numbers in Heavy Parts AI →

9w-5132 Brake Gp-Parking

0S***66	Bolt-Pulley To Crankshaft Adapter	16
14***10	Spindle-Wheel	4
1P***93	Cup-Roller Bearing	8
2G***37	Hub-Brake	4

See all parts with full part numbers in Heavy Parts AI →

7d-8440 Brake Gp-Service

11***34	Hose As	1
18***08	Valve Group-Solenoid; -Air Horn	1
1H***23	Packing,Preformed Part Of Kit P/N 5r***25	1
25***47	Valve As-Air; (Parking Brake)	1

See all parts with full part numbers in Heavy Parts AI →

284-5771 Control Gp-Parking Brake

00***43	Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340	1
11***26	Plate As	1
12***73	Bolt-12 Point Head; (3/8-16x1.25-In)(3/8-16thd)	1
14***85	Nut-Weld; (M10 X 1.5 Thd)	1

See all parts with full part numbers in Heavy Parts AI →

283-3499 Control Gp-Service Brake

17***07	Clip	1
28***99	Control Group-Service Brake	1
31***39	Dryer & Lines Group-Air	1
34***47	Hose As	1

See all parts with full part numbers in Heavy Parts AI →

311-2739 Dryer & Lines Gp-Air

00***53	Elbow-Pipe; (1/2-14 Nptf Thd)	2
00***33	Tee-Pipe	1
12***79	Clip	1
1P***15	Grommet Assem.	4

See all parts with full part numbers in Heavy Parts AI →

311-2738 Dryer & Lines Gp-Air

12***23	Bracket Assem.	2
17***07	Clip	1
19***45	Reservoir	1
20***99	Clip	5

See all parts with full part numbers in Heavy Parts AI →

314-9370 Tank Gp-Air

15***70	Nut; (1/2-20-2b-Thd)	1
16***08	Washer; (13.03x25.4x2.38-mm Thk)	1
31***46	Coil As	1
31***70	Tank Group-Air	1

See all parts with full part numbers in Heavy Parts AI →

185-0008 Valve Gp-Solenoid

16***49	Clamp	2
16***50	Accumulator Group-Hydraulic; -Blade Cushion	2
16***58	Plate As	1
18***08	Valve Group-Solenoid; -Air Horn	1

See all parts with full part numbers in Heavy Parts AI →

Cooling System

117-3643 Cooler Gp-Engine Oil

11***43	Cooler Group-Engine Oil	1
20***97	Pump Group-Engine Oil	1
6V***15	Bolt; (M10x1.5x75-mm)	2
6V***39	Washer-Hard-Alt Strap To Fan Drive Belt	2

See all parts with full part numbers in Heavy Parts AI →

310-5881 Cooling Ar

23***55	Gasket	1
26***43	Core As-Engine Oil Cooler	1
31***81	Cooling Ar	1
3P***56	Seal-O-Ring; (21.82mm Id)	2

See all parts with full part numbers in Heavy Parts AI →

284-0824 Fan Gp-Blower -Radiator

28***24	Fan Group-Blower; -Radiator	1
29***11	Aftercooler Group-Air	1
31***82	Radiator Group	1

See all parts with full part numbers in Heavy Parts AI →

303-6003 Guard Gp-Fan

24***34	Spider As; (8-Blade)	1
30***03	Guard Group-Fan	1
8T***21	Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm)	6
8T***95	Capscrew; (Hex Hd) (M10 X 1.50 X 30l Gr 10.9)	6

See all parts with full part numbers in Heavy Parts AI →

311-0274 Lines Gp-Water

11***23	Regulator-Water Temperature; (97-Deg C)(Coolant)	2
12***66	Gasket	1
14***95	Plug As	1
15***23	Valve-Sampling; (Engine Coolant)	1

See all parts with full part numbers in Heavy Parts AI →

206-4228 Lines Gp-Water

12***64	Rivet-Pop	6
20***28	Lines Group-Water; -Engine	1
26***68	Seal-Bulk; (17-cm Each)	0
30***09	Shroud As; (Upper, Lh)	1

See all parts with full part numbers in Heavy Parts AI →

318-2076 Pump Gp-Water

14***95	Plug As	2
16***19	Plug As	1
16***95	Elbow As	1
1J***71	Seal (10.52 Degrees I.D.); Seal-O-Ring -- To Adapter	2

See all parts with full part numbers in Heavy Parts AI →

236-4413 Pump Gp-Water

15***25	Valve-Fluid Sampling	1
15***70	Cap-Dust; (Engine Coolant)	1
16***62	Connector Assembly	1
18***20	Adapter As	1

See all parts with full part numbers in Heavy Parts AI →

264-1434 Pump Gp-Water

11***37	Pulley; (8-Groove)	1
11***25	Filter; (Water)(Pump)	1
12***70	Shaft Assem.	1
14***88	Seal As; (Water Pump)	1

See all parts with full part numbers in Heavy Parts AI →

310-5882 Radiator Gp

06***69	Stem	1
12***47	Elbow	1
14***95	Plug As	2
15***58	Elbow As	1

See all parts with full part numbers in Heavy Parts AI →

311-2766 Tank Gp-Coolant

12***07	Mount As-Resilient	1
12***27	Seal; (95-cm Each)	0
17***81	Washer-Hard; (8.5x40x3-mm Thk)	1
25***08	Core As-Radiator	1

See all parts with full part numbers in Heavy Parts AI →

Electrical And Starting System

3e-6328 Alarm Gp

13***43	Boot; (Red)(Red)	1
1P***10	Tape (Order By The Meter) (Use As	1
26***82	Alternator Group-Charging	1
31***77	Cable As	1

See all parts with full part numbers in Heavy Parts AI →

312-0970 Alternator Ar-Charging

03***12	Screw-Forming; (10-24x0.5-In)	5
11***19	Diode As-Alternator	1
18***34	Nut-Flange; (5/8-18-Thd)	1
1H***44	Lockwasher (Bracket To Cab)	1

See all parts with full part numbers in Heavy Parts AI →

6n-9294 Alternator Gp-Charging

18***38	Collar	2
18***39	Fan As; (Alternator)	1
18***44	Coil Assem.	1
18***45	Frame	1

See all parts with full part numbers in Heavy Parts AI →

197-8820 Alternator Gp-Charging

19***20	Alternator Group-Charging; -24-Volt, 95-Ampere	1
1F***48	Nut 12.70 mm(.50 In.) Thread	1
4S***80	Rod Alternator	1
5P***76	Washer Guard To Support Assembly And Guard Assembly	1

See all parts with full part numbers in Heavy Parts AI →

253-4006 Alternator Gp-Charging

19***20	Alternator Group-Charging; -24-Volt, 95-Ampere	1
25***06	Alternator Group-Charging	1

See all parts with full part numbers in Heavy Parts AI →

263-3982 Alternator Gp-Charging

26***82	Alternator Group-Charging	1
30***87	Control Group-Unprogrammed; (Transmission)	1

See all parts with full part numbers in Heavy Parts AI →

260-7647 Application Gp-Power Train

15***10	Battery; (12-Volt, 1400-Cca)	2
15***49	Cable-Electrical; (03050 mm )	0
15***50	Cable; (00-Ga, Black)(183-cm Each)	0
1M***19	Bolt; (5/16-18x1.375-In)(5/16-18x1.375 In)	1

See all parts with full part numbers in Heavy Parts AI →

304-9957 Battery & Wiring Gp -Heavy Duty

09***81	Spacer; (10.5x20x10.0mm Thk)	1
10***49	Rod	2
12***73	Cap As-Filler; (Battery)	6
13***78	Terminal As	1

See all parts with full part numbers in Heavy Parts AI →

311-0795 Battery & Wiring Gp

10***28	Spacer-Special; (12.7x26x28.7-mm Thk)	4
14***92	Stud; (M8x1.25-Thd)	4
22***73	Control Group-Engine Electronic	1
23***93	Bolt-Flange Head; (M6x1x35-mm)	1

See all parts with full part numbers in Heavy Parts AI →

298-5592 Battery & Wiring Gp -Heavy Duty

29***20	Support Group-Battery	1
29***15	Plate As	1
29***92	Battery & Wiring Group; -Heavy-Duty	2
7X***29	Washer; (11x25x3-mm Thk)	3

See all parts with full part numbers in Heavy Parts AI →

284-5358 Battery & Wiring Gp -Wet

15***00	Battery; -Maintenance Free	2
15***49	Cable-Electrical; (03050 mm )	0
15***50	Cable; (00-Ga, Black)(183-cm Each)	0
1M***19	Bolt; (5/16-18x1.375-In)(5/16-18x1.375 In)	1

See all parts with full part numbers in Heavy Parts AI →

284-5359 Battery & Wiring Gp -Heavy Duty

10***49	Rod	2
15***10	Battery; (12-Volt, 1400-Cca)	2
15***49	Cable-Electrical; (03050 mm )	0
15***50	Cable; (00-Ga, Black)(183-cm Each)	0

See all parts with full part numbers in Heavy Parts AI →

246-9345 Control & Mtg Gp-Engine Elek

24***45	Control & Mtg Group-Engine Elek	1
26***78	Control Group-Unprogrammed; (Engine)	1

See all parts with full part numbers in Heavy Parts AI →

226-7473 Control Gp-Engine Electronic

17***89	Control Group-Unprogrammed; -Steering, Transmission	1
22***73	Control Group-Engine Electronic	1

See all parts with full part numbers in Heavy Parts AI →

177-4493 Control Gp-Power Train

10***52	Screw-Pan Head; (8-32x0.375-In)	1
13***26	Washer; (4.52x8.28x0.76-mm Thk)	1
17***93	Control Group-Power Train	1
6V***03	Kit; (Retaining Bolt) (Each Includes Bolt, Retaining Ring And 4 O-Ring Seals)	2

See all parts with full part numbers in Heavy Parts AI →

172-9389 Control Gp-Unprogrammed

17***86	Accessory Group-Cab; -High Profile	1
17***89	Control Group-Unprogrammed; -Steering, Transmission	1
18***43	Converter Group-Electrical	1

See all parts with full part numbers in Heavy Parts AI →

286-4329 Converter Ar-Electrical -Low Profile

09***66	Washer; (Hard) (4.5x9x1mm Thk)	2
20***85	Converter Group-Electrical; (24-Volt To 12-Volt)(Air Conditioner, Heater)	1
20***82	Plate As	1
28***29	Converter Ar-Electrical; -Low Profile	1

See all parts with full part numbers in Heavy Parts AI →

286-4328 Converter Ar-Electrical -High Profile

17***85	Accessory Group-Cab; -Low Profile	1
18***43	Converter Group-Electrical	1
28***28	Converter Ar-Electrical; -High Profile	1

See all parts with full part numbers in Heavy Parts AI →

180-4643 Converter Gp-Electrical

09***66	Washer; (Hard) (4.5x9x1mm Thk)	2
18***43	Converter Group-Electrical	1
20***85	Converter Group-Electrical; (24-Volt To 12-Volt)(Air Conditioner, Heater)	1
20***82	Plate As	1

See all parts with full part numbers in Heavy Parts AI →

286-4331 Converter Gp-Electrical -Radio

12***74	Screw-Pan Head; (8-32x9.52-mm)	1
13***26	Washer; (4.52x8.28x0.76-mm Thk)	1
28***31	Converter Group-Electrical; -Radio	1
35***05	Software Group-Communication	1

See all parts with full part numbers in Heavy Parts AI →

286-4330 Converter Gp-Electrical -Radio

23***02	Converter-Electrical; (24-Volt To 12-Volt)	1
28***30	Converter Group-Electrical; -Radio	1
31***35	Harness As-Switch	1
31***36	Plate As	1

See all parts with full part numbers in Heavy Parts AI →

262-1421 Electronics Gp-Communication -Product Link 300

26***21	Electronics Group-Communication; -Product Link 300	1
31***03	Software Group-Implement	1
33***83	Service Group-Implement; (Grade Control)	1

See all parts with full part numbers in Heavy Parts AI →

253-2697 Electronics Gp-Implement

25***97	Electronics Group-Implement; -Grade Control	1
29***00	Software Group-Power Train	1
29***01	Service Group-Power Train	1

See all parts with full part numbers in Heavy Parts AI →

291-5475 Electronics Gp-Power Train

10***04	Kit-Receptacle; (4-Pin)(Start Switch)	1
13***00	Clip; (Tab)	4
15***24	Knob As; (Blade Lift, Rh)	1
15***25	Knob As; (Blade Lift, Lh)	1

See all parts with full part numbers in Heavy Parts AI →

297-8448 Grade Control Ar

10***04	Kit-Receptacle; (4-Pin)(Start Switch)	1
13***00	Clip; (Tab)	4
15***24	Knob As; (Blade Lift, Rh)	1
15***25	Knob As; (Blade Lift, Lh)	1

See all parts with full part numbers in Heavy Parts AI →

297-6867 Ground Gp-Electrical

29***67	Ground Group-Electrical	1
5C***61	Nut (M8x1.25 Thd); (M8x1.25 Thd)	1
8T***24	Washer-To Assemble Valve As And Plates	2

See all parts with full part numbers in Heavy Parts AI →

332-1544 Heater Gp-Jacket Water

32***11	Element As-Jacket Water Heater; (240-Volt, 1000-Watt)	1
33***44	Heater Group-Jacket Water	1
4F***52	Packing,Preformed Cover Part Of Kit P/N 4j***80	1
4N***27	Cord As-Heater Element; -Jacket Water	1

See all parts with full part numbers in Heavy Parts AI →

302-5429 Installation Ar-Communication -Product Link 321sr

22***96	Antenna; (Flexible)(Flex)	1
25***03	Harness As-Radio; (Product Link)	1
25***04	Harness As-Control; (Product Link)	1
25***63	Harness As-Radio; (Product Link)	1

See all parts with full part numbers in Heavy Parts AI →

302-5428 Installation Gp-Communication -Product Link

09***47	Block	1
10***04	Plate	1
12***78	Locknut; (M6x1-Thd)	8
17***07	Clip	3

See all parts with full part numbers in Heavy Parts AI →

261-1502 Lamp Gp

10***02	Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness)	1
18***35	Pin-Connector; (16-Ga To 18-Ga)	2
26***02	Lamp Group	1
9X***68	Lens-Clear	1

See all parts with full part numbers in Heavy Parts AI →

3e-6389 Lamp Gp-Dome

10***03	Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge)	1
18***35	Pin-Connector; (16-Ga To 18-Ga)	3
3E***89	Lamp Group-Dome; -With Switch-Cab, Rh, Lh	1
7N***43	Lamp-Miniature; (Dome)	1

See all parts with full part numbers in Heavy Parts AI →

254-8155 Lamp Gp-Flood

16***56	Bracket; (Lamp Retaining)	1
17***91	Bracket Assem.	1
17***92	Body Assem.	1
20***14	Lens As; (Floodlight)	1

See all parts with full part numbers in Heavy Parts AI →

346-9593 Lamp Gp-Flood

16***56	Bracket; (Lamp Retaining)	1
17***91	Bracket Assem.	1
17***92	Body Assem.	1
20***11	Lens As	1

See all parts with full part numbers in Heavy Parts AI →

234-4323 Lamp Gp-Flood

16***56	Bracket; (Lamp Retaining)	1
20***14	Lens As; (Floodlight)	1
23***23	Lamp Group-Flood; -Vertical Mount	1
23***30	Body As; (Floodlight)	1

See all parts with full part numbers in Heavy Parts AI →

234-4325 Lamp Gp-Flood

16***56	Bracket; (Lamp Retaining)	1
20***14	Lens As; (Floodlight)	1
23***25	Lamp Group-Flood; -Suspended Mount	1
23***30	Body As; (Floodlight)	1

See all parts with full part numbers in Heavy Parts AI →

234-4324 Lamp Gp-Flood

16***56	Bracket; (Lamp Retaining)	1
20***11	Lens As	1
23***24	Lamp Group-Flood; -24-Volt, Vertical Mount	1
23***30	Body As; (Floodlight)	1

See all parts with full part numbers in Heavy Parts AI →

272-6641 Lamp Gp-Flood

16***56	Bracket; (Lamp Retaining)	1
17***91	Bracket Assem.	1
17***92	Body Assem.	1
20***14	Lens As; (Floodlight)	1

See all parts with full part numbers in Heavy Parts AI →

302-0413 Lamp Gp-Head & Signal

10***53	Case, Spacer; (Spherical)	1
10***54	Spacer; (Spherical)	1
10***55	Washer; (Spherical)	1
10***05	Kit-Receptacle; (6-Pin)(Display Monitor Harness)	1

See all parts with full part numbers in Heavy Parts AI →

302-0412 Lamp Gp-Head & Signal

10***53	Case, Spacer; (Spherical)	1
10***54	Spacer; (Spherical)	1
10***55	Washer; (Spherical)	1
10***05	Kit-Receptacle; (6-Pin)(Display Monitor Harness)	1

See all parts with full part numbers in Heavy Parts AI →

344-3457 Lamp Gp-Head & Signal

10***53	Case, Spacer; (Spherical)	1
10***54	Spacer; (Spherical)	1
10***55	Washer; (Spherical)	2
10***05	Kit-Receptacle; (6-Pin)(Display Monitor Harness)	1

See all parts with full part numbers in Heavy Parts AI →

344-3458 Lamp Gp-Head & Signal

10***53	Case, Spacer; (Spherical)	1
10***54	Spacer; (Spherical)	1
10***55	Washer; (Spherical)	2
10***05	Kit-Receptacle; (6-Pin)(Display Monitor Harness)	1

See all parts with full part numbers in Heavy Parts AI →

259-0134 Lamp Gp-Registration Plate

10***02	Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness)	1
18***35	Pin-Connector; (16-Ga To 18-Ga)	2
25***34	Lamp Group-Registration Plate; -European Market	1
5C***83	Lamp; (24-Volt, 5-Watt)(Registration Plate)	1

See all parts with full part numbers in Heavy Parts AI →

135-0426 Lamp Gp-Signal -Stop, Tail

10***03	Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge)	1
13***26	Lamp Group-Signal; (24-Volt, Stop, Tail)(Stop/Tail)	1
18***35	Pin-Connector; (16-Ga To 18-Ga)	3

See all parts with full part numbers in Heavy Parts AI →

334-5410 Lamp Gp-Signal -Turn

10***02	Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness)	1
18***35	Pin-Connector; (16-Ga To 18-Ga)	2
33***10	Lamp Group-Signal; -Turn	1

See all parts with full part numbers in Heavy Parts AI →

334-5409 Lamp Gp-Signal -Park, Turn

10***02	Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness)	1
18***35	Pin-Connector; (16-Ga To 18-Ga)	2
33***09	Lamp Group-Signal; -Park, Turn	1

See all parts with full part numbers in Heavy Parts AI →

162-2073 Lamp Gp-Signal -Rear Turn

10***03	Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge)	1
16***73	Lamp Group-Signal; -Rear Turn	1
18***35	Pin-Connector; (16-Ga To 18-Ga)	3

See all parts with full part numbers in Heavy Parts AI →

135-0427 Lamp Gp-Signal -Park, Turn

10***03	Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge)	1
13***27	Lamp Group-Signal; -Park, Turn	1
18***35	Pin-Connector; (16-Ga To 18-Ga)	3

See all parts with full part numbers in Heavy Parts AI →

284-3757 Lamp Gp-Warning Beacon -Amber, Strobe

28***57	Lamp Group-Warning Beacon; -Amber, Strobe	1
28***62	Lighting Group-Flood; -Ripper	1
28***76	Lighting Group-Flood; -Front Frame	1

See all parts with full part numbers in Heavy Parts AI →

294-8547 Lighting Ar-Flood

28***55	Lighting Group-Roading; -Cab Front-Cab Front, High/Low Beam	1
28***63	Lighting Group-Signal; -Turn-Rear Turn	1
29***47	Lighting Ar-Flood	1
29***41	Switch Group-Light; -Turn	1

See all parts with full part numbers in Heavy Parts AI →

294-8546 Lighting Ar-Roading

10***02	Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness)	1
13***00	Clip; (Tab)	3
17***72	Lamp Group-Compartment; (24-Volt)(Rh Enclosure)	2
18***35	Pin-Connector; (16-Ga To 18-Ga)	0

See all parts with full part numbers in Heavy Parts AI →

294-8544 Lighting Ar-Roading

28***54	Lighting Group-Flood; -Ripper	1
28***55	Lighting Group-Roading; -Cab Front-Cab Front, High/Low Beam	1
28***63	Lighting Group-Signal; -Turn-Rear Turn	1
29***44	Lighting Ar-Roading	1

See all parts with full part numbers in Heavy Parts AI →

294-8545 Lighting Ar-Roading

28***53	Lighting Group-Roading	1
28***63	Lighting Group-Signal; -Turn-Rear Turn	1
29***45	Lighting Ar-Roading	1

See all parts with full part numbers in Heavy Parts AI →

284-5394 Lighting Gp-Backup

12***47	Switch As-Rocker; (24-Volt)(Auxiliary Backup Lights)	1
13***10	Clamp; (Flat)	2
17***49	Tube	1
17***50	Clamp	2

See all parts with full part numbers in Heavy Parts AI →

284-5362 Lighting Gp-Flood -Ripper

03***48	Clip; (11.11mm .437in Id)	6
14***85	Clip	1
23***23	Lamp Group-Flood; -Vertical Mount	2
23***25	Lamp Group-Flood; -Suspended Mount	2

See all parts with full part numbers in Heavy Parts AI →

284-5354 Lighting Gp-Flood -Ripper

23***23	Lamp Group-Flood; -Vertical Mount	2
28***54	Lighting Group-Flood; -Ripper	1
30***80	Harness As-Rear Lighting	1
6V***65	Clip (Clip Under Hydraulic Tank)	2

See all parts with full part numbers in Heavy Parts AI →

284-5376 Lighting Gp-Flood -Front

03***48	Clip; (11.11mm .437in Id)	6
10***02	Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness)	4
10***03	Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge)	1
12***74	Tube-Heat Shrink; (5.72-mm Dia)(950-cm)	0

See all parts with full part numbers in Heavy Parts AI →

284-5377 Lighting Gp-Flood -Snow Wing

13***40	Locknut; (M8x1.25-Thd)	4
25***34	Lamp Group-Registration Plate; -European Market	1
28***77	Lighting Group-Flood; -Snow Wing	1
33***15	Plate	1

See all parts with full part numbers in Heavy Parts AI →

334-3348 Lighting Gp-Registration Plate

10***92	Plate	2
10***78	Switch As-Rotary; (Headlights-High/Low)	1
10***58	Flasher As; (24-Volt)	1
13***00	Clip; (Tab)	2

See all parts with full part numbers in Heavy Parts AI →

284-5353 Lighting Gp-Roading

10***92	Plate	2
10***78	Switch As-Rotary; (Headlights-High/Low)	1
10***58	Flasher As; (24-Volt)	1
13***00	Clip; (Tab)	2

See all parts with full part numbers in Heavy Parts AI →

284-5355 Lighting Gp-Roading -Cab Front

13***00	Clip; (Tab)	2
28***55	Lighting Group-Roading; -Cab Front-Cab Front, High/Low Beam	1
33***10	Lamp Group-Signal; -Turn	2
5C***90	Nut; (M6x1-Thd)(Air Inlet Heater)	6

See all parts with full part numbers in Heavy Parts AI →

284-5363 Lighting Gp-Signal -Turn-Rear Turn

10***62	Switch As; (Warning Beacon)	1
10***32	Plate As	1
13***00	Clip; (Tab)	1
28***57	Lamp Group-Warning Beacon; -Amber, Strobe	1

See all parts with full part numbers in Heavy Parts AI →

284-5357 Lighting Gp-Warning

10***62	Switch As; (Warning Beacon)	1
10***32	Plate As	1
11***70	Clip As-Connect; (4-Pin)	1
13***00	Clip; (Tab)	1

See all parts with full part numbers in Heavy Parts AI →

286-4430 Lighting Gp-Warning Beacon

10***02	Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness)	1
28***30	Lighting Group-Warning Beacon	1
9W***52	Pin-Connector; (14-Ga To 16-Ga)	2

See all parts with full part numbers in Heavy Parts AI →

170-5335 Motor Gp-Electric -Circulating Fan

17***35	Motor Group-Electric; -Circulating Fan	1
26***22	Drawbar As	1
5T***75	Reinforcement	2
8F***36	Lug -Weld To Push Frame Strut; (3/8-16x0.75-In)	12

See all parts with full part numbers in Heavy Parts AI →

254-5960 Mounting Gp-Grade Control -Circle

18***38	Washer-Hard; (21x36.5x3.5-mm Thk)	2
25***82	Boss	1
25***60	Mounting Group-Grade Control; -Circle	1
25***31	Bracket	1

See all parts with full part numbers in Heavy Parts AI →

247-6449 Mounting Gp-Grade Control

15***60	Circle Group	1
18***38	Washer-Hard; (21x36.5x3.5-mm Thk)	2
23***27	Bracket As	1
24***49	Mounting Group-Grade Control; -Drawbar	1

See all parts with full part numbers in Heavy Parts AI →

235-8200 Plug Gp-Connector -Engine Harness, Protective Cover

10***06	Receptacle Kit; (Includes Wedge And Receptacle Assem.)	1
23***00	Plug Group-Connector; -Engine Harness, Protective Cover	1
24***53	Plug As	1
3S***93	Strap-Cable-To Tie Harnesses Together	1

See all parts with full part numbers in Heavy Parts AI →

263-9088 Radio Gp-Communication -Product Link 121sr

26***88	Radio Group-Communication; -Product Link 121sr	1
33***08	Software Group-Communication; (Product Link 121sr)	1

See all parts with full part numbers in Heavy Parts AI →

297-5355 Sensor Gp-Engine

16***61	Plug As	1
18***06	Plug As; (High Temperature)	1
18***63	Plug Group	1
19***93	Sensor Group-Pressure; -Atmospheric	1

See all parts with full part numbers in Heavy Parts AI →

214-4863 Sensor Gp-Position

10***03	Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge)	1
18***35	Pin-Connector; (16-Ga To 18-Ga)	1
21***63	Sensor Group-Position; -Rotary-Tc Impeller Clutch, Lh Pedal	1
3E***71	Wedge; (Receptacle Lock) (3 Pin)	1

See all parts with full part numbers in Heavy Parts AI →

266-1467 Sensor Gp-Position -Brake Pedal

10***03	Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge)	1
12***67	Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire)	3
26***67	Sensor Group-Position; -Brake Pedal	1
3E***71	Wedge; (Receptacle Lock) (3 Pin)	1

See all parts with full part numbers in Heavy Parts AI →

210-1747 Sensor Gp-Pressure

16***04	Sensor Group-Pressure; (Turbocharger Outlet)	1
21***47	Sensor Group-Pressure; -Air Inlet Manifold	1
6V***48	Seal--O-Ring--To Governor Drive Housing	1

See all parts with full part numbers in Heavy Parts AI →

197-8394 Sensor Gp-Pressure

16***05	Sensor As-Pressure; (Unfiltered Engine Oil)	1
19***94	Sensor Group-Pressure; -Engine Oil	1
6V***48	Seal--O-Ring--To Governor Drive Housing	1

See all parts with full part numbers in Heavy Parts AI →

224-4536 Sensor Gp-Pressure

15***60	Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness)	1
15***76	Wedge-Plug Lock; (3-Pin)	1
19***26	Harness As-Sensor; (16-18 Ga Wire)(Engine Oil Temperature)	1
19***27	Harness As-Sensor; (14-Ga Wire)(Engine Oil Temperature)	1

See all parts with full part numbers in Heavy Parts AI →

236-6220 Sensor Gp-Pressure

21***67	Seal-O-Ring	1
22***36	Sensor Group-Pressure; -Injection Actuation	1
23***20	Sensor Group-Pressure; -Injection Actuation	1

See all parts with full part numbers in Heavy Parts AI →

194-6722 Sensor Gp-Pressure

15***60	Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness)	1
18***40	Socket-Connector; (14-Ga To 18-Ga)(14-Ga To 18-Ga)	3
19***22	Sensor Group-Pressure; -Atmospheric Air	1
9X***13	Sleeve (Order By cm)(Use As Required)	0

See all parts with full part numbers in Heavy Parts AI →

197-8393 Sensor Gp-Pressure

16***03	Sensor Group-Pressure; (Turbocharger Inlet, Rh)	1
19***93	Sensor Group-Pressure; -Atmospheric	1
6V***49	Seal-O-Ring (Id=11.89mm); (11.89-mm Id)	1

See all parts with full part numbers in Heavy Parts AI →

193-2550 Sensor Gp-Speed

10***02	Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness)	1
17***49	Strap; (Marker)	1
19***50	Sensor Group-Speed; -Tmsn, Torque Converter Output	1
9X***13	Sleeve (Order By cm)(Use As Required)	0

See all parts with full part numbers in Heavy Parts AI →

236-6221 Sensor Gp-Speed

23***21	Sensor Group-Speed; -Engine Timing	1
24***30	Sensor Group-Speed; -Engine Timing	1
3P***47	Seal-O-Ring (Id=13.94mm); (13.949mm Id)	2

See all parts with full part numbers in Heavy Parts AI →

290-5792 Sensor Gp-Speed

10***02	Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness)	1
14***36	Pin-Connector; (14-Ga To 18-Ga)	2
17***49	Strap; (Marker)	1
29***92	Sensor Group-Speed	1

See all parts with full part numbers in Heavy Parts AI →

234-5013 Sensor Gp-Temperature

23***13	Sensor Group-Temperature; -Air Inlet Manifold	1
23***80	Seal-O-Ring	1
25***53	Sensor As-Temperature; (Torque Converter Outlet Oil)	1

See all parts with full part numbers in Heavy Parts AI →

274-7395 Sensor Gp-Temperature

13***45	Pad; (Connector)	2
26***97	Sensor Group-Temperature; (Air Inlet Manifold)	1
27***95	Sensor Group-Temperature; -Air Inlet Manifold	1

See all parts with full part numbers in Heavy Parts AI →

274-7396 Sensor Gp-Temperature

13***45	Pad; (Connector)	1
26***97	Sensor Group-Temperature; (Air Inlet Manifold)	1
27***96	Sensor Group-Temperature; -Engine Coolant	1
6V***09	Seal-O-Ring (Id=16.36mm); (16.36-mm Id)	1

See all parts with full part numbers in Heavy Parts AI →

3e-8700 Sensor Gp-Temperature

15***60	Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness)	1
18***36	Socket-Connector; (16-Ga To 18-Ga)	3
3E***00	Sensor Group-Temperature; -Transmission Oil	1
9X***13	Sleeve (Order By cm)(Use As Required)	0

See all parts with full part numbers in Heavy Parts AI →

320-1340 Starting Aid Ar-Ether

31***01	Wiring Group-Ether Starting Aid	1
31***71	Starting Aid Group-Ether	1
32***40	Starting Aid Ar-Ether	1

See all parts with full part numbers in Heavy Parts AI →

311-2771 Starting Aid Gp-Ether

12***28	Spacer; (11x20x10-mm Thk)	2
23***45	Nut-Sleeve; (5/16-24-Thd)	1
23***34	Valve Group-Ether Starting	1
24***94	Fitting As; (Control)	1

See all parts with full part numbers in Heavy Parts AI →

207-1517 Starting Motor Gp-Electric

03***23	Bolt; (1/4-28x1-In)	5
10***63	Terminal As-Starter	1
10***49	Housing As-Starter	1
20***84	Solenoid Kit; (Consists Of Bolt, Nut, Terminal And Solenoid Assem.)	1

See all parts with full part numbers in Heavy Parts AI →

111-4275 Starting Motor Gp-Electric

11***75	Starting Motor Group-Electric; (Cold Weather)	1
11***73	Bolt-12 Point Head; (M10x1.5x35-mm)	3
1S***51	Terminal-Cable; (00-Ga, 1/2-In Screw)	1
1S***52	Terminal-Cable; (00-Ga, 3/8-In Screw)	1

See all parts with full part numbers in Heavy Parts AI →

347-7898 Starting Motor Gp-Electric

11***73	Bolt-12 Point Head; (M10x1.5x35-mm)	3
13***30	Wire As	1
33***06	Starting Motor Group-Electric	1
34***98	Starting Motor Group-Electric	1

See all parts with full part numbers in Heavy Parts AI →

7n-0718 Switch Gp-Disconnect -Battery

2H***22	Lockwasher	2
6F***45	Nut-Full; (3/8-24-Thd)	2
7N***18	Switch As-Disconnect; -Battery-Ground Level	1
8H***03	Nut-Hex; (3/4-16-2a Thd)	1

See all parts with full part numbers in Heavy Parts AI →

164-7577 Switch Gp-Bypass

10***02	Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness)	1
16***77	Switch Group-Bypass; -Xmsn Lubrication Supply Filter-Xmsn Lubrication Charge Filter-Hoist Screen-Tc, Front Brake Cooling-Transmission Oil Filter-Rear Axle Oil Filter	1
18***35	Pin-Connector; (16-Ga To 18-Ga)	2
3D***24	O-Ring - For Oil Drain & Level Plug (Items 3 & 7)	1

See all parts with full part numbers in Heavy Parts AI →

294-8641 Switch Gp-Light -Turn

10***78	Switch As-Rotary; (Headlights-High/Low)	1
10***58	Flasher As; (24-Volt)	1
17***64	Switch Group-Rotary; (Turn Signal, Hazard)	1
29***41	Switch Group-Light; -Turn	1

See all parts with full part numbers in Heavy Parts AI →

241-8368 Switch Gp-Magnetic

15***70	Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness)	1
18***36	Socket-Connector; (16-Ga To 18-Ga)	2
24***68	Switch Group-Magnetic; -Main Power Relay-Main Relay	1
4F***94	Nut; (Jam) (5/16-24 Thd)	2

See all parts with full part numbers in Heavy Parts AI →

275-1253 Switch Gp-Pressure

23***11	Plug As-Connector; (2-Pin)	1
26***29	Seal-Connector; (3-cm)	1
27***53	Switch Group-Pressure; -Fuel Filter-Fuel	1
6V***89	Seal-O-Ring (Id=19.18mm)	1

See all parts with full part numbers in Heavy Parts AI →

275-7741 Switch Gp-Wiper -Intermittent

10***06	Receptacle Kit; (Includes Wedge And Receptacle Assem.)	1
18***35	Pin-Connector; (16-Ga To 18-Ga)	6
27***41	Switch Group-Wiper; -Intermittent-Front, Rear	1
2H***20	Lockwasher (11.38mm Id)	1

See all parts with full part numbers in Heavy Parts AI →

275-7764 Switch Gp-Wiper -Intermittent

01***16	Setscrew; (8-32x0.5-In)	1
27***41	Switch Group-Wiper; -Intermittent-Front, Rear	1
27***64	Switch Group-Wiper; -Intermittent	1
7T***02	Knob-Wiper Switch; (Front)	1

See all parts with full part numbers in Heavy Parts AI →

239-1134 Valve Gp-Ether Starting

10***02	Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness)	1
23***34	Valve Group-Ether Starting	1
35***89	Filter; (Ether Start)	1
7N***01	Gasket	1

See all parts with full part numbers in Heavy Parts AI →

311-0803 Wiring Gp-Air Conditioner

12***97	Clip	1
13***00	Clip; (Tab)	4
14***36	Pin-Connector; (14-Ga To 18-Ga)	4
15***70	Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness)	6

See all parts with full part numbers in Heavy Parts AI →

311-0802 Wiring Gp-Auxiliary -Fuel Tank

10***01	Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge)	1
10***02	Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness)	1
10***03	Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge)	1
10***04	Kit-Receptacle; (4-Pin)(Start Switch)	1

See all parts with full part numbers in Heavy Parts AI →

284-5352 Wiring Gp-Blade Cushion

03***48	Clip; (11.11mm .437in Id)	2
13***00	Clip; (Tab)	2
14***85	Clip	1
28***52	Wiring Group-Blade Cushion	1

See all parts with full part numbers in Heavy Parts AI →

285-3361 Wiring Gp-Cab

01***16	Setscrew; (8-32x0.5-In)	1
09***66	Washer; (Hard) (4.5x9x1mm Thk)	3
10***06	Receptacle Kit; (Includes Wedge And Receptacle Assem.)	1
11***74	Wiper And Washer Switch Assembly; (Wiper, Washer)(Wiper, Washer, Rear)	2

See all parts with full part numbers in Heavy Parts AI →

284-5356 Wiring Gp-Cab -Machine Immobilizer

11***70	Clip As-Connect; (4-Pin)	1
28***56	Wiring Group-Cab; -Machine Immobilizer	1
29***79	Harness As-Switch; (Machine Immobilizer)	1
3E***39	Relay As; (24-Volt)(General Alarm)	1

See all parts with full part numbers in Heavy Parts AI →

284-5346 Wiring Gp-Console

10***04	Kit-Receptacle; (4-Pin)(Start Switch)	1
11***87	Start Switch Assembly; (Key)(Engine)	1
13***00	Clip; (Tab)	1
16***14	Clip	3

See all parts with full part numbers in Heavy Parts AI →

198-2714 Wiring Gp-Engine

10***20	Plug As-Connector; (2-Pin)	1
10***01	Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge)	1
10***02	Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness)	1
10***03	Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge)	1

See all parts with full part numbers in Heavy Parts AI →

311-0801 Wiring Gp-Ether Starting Aid

13***89	Clip; (Ladder)	1
31***01	Wiring Group-Ether Starting Aid	1
33***72	Harness As-Starting Aid	1
3E***39	Relay As; (24-Volt)(General Alarm)	1

See all parts with full part numbers in Heavy Parts AI →

334-3341 Wiring Gp-Front

09***66	Washer; (Hard) (4.5x9x1mm Thk)	4
10***01	Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge)	8
10***02	Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness)	2
10***03	Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge)	1

See all parts with full part numbers in Heavy Parts AI →

284-5343 Wiring Gp-Front

09***66	Washer; (Hard) (4.5x9x1mm Thk)	4
10***01	Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge)	9
10***02	Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness)	2
10***03	Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge)	1

See all parts with full part numbers in Heavy Parts AI →

252-5709 Wiring Gp-Grade Control -Cab, Indicator Lamp

11***48	Lamp; (24-Volt, 3-Watt)(Clear)(Fuel Level Gauge)	1
24***57	Wiring As; (Accugrade)	1
25***09	Wiring Group-Grade Control; -Cab, Indicator Lamp	1

See all parts with full part numbers in Heavy Parts AI →

294-3542 Wiring Gp-Grade Control -Accugrade

03***48	Clip; (11.11mm .437in Id)	1
06***51	Clamp	1
11***71	Relay; (24-Volt)(Hydraulic Lock Solenoid)	2
13***00	Clip; (Tab)	4

See all parts with full part numbers in Heavy Parts AI →

295-1090 Wiring Gp-Power Receptacle -Cigarette Lighter

29***90	Wiring Group-Power Receptacle; -Cigarette Lighter	1
29***49	Harness As-Starting Aid	1
6T***99	Housing As; (Cigar Lighter)	1
8N***53	Knob As-Lighter; (Lighter)	1

See all parts with full part numbers in Heavy Parts AI →

311-0794 Wiring Gp-Rear

10***02	Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness)	1
10***03	Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge)	1
10***61	Film-Instruction; (Engine Shutdown)	1
12***88	Plate As	1

See all parts with full part numbers in Heavy Parts AI →

284-5348 Wiring Gp-Rear Lighting

10***41	Terminal-Receptacle; (18-Ga To 20-Ga)	4
10***01	Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge)	1
10***02	Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness)	3
11***62	Tube-Heat Shrink; (10.85-mm Dia)(299-cm)	0

See all parts with full part numbers in Heavy Parts AI →

334-3344 Wiring Gp-Steering Console

06***71	Terminal-Blade	11
08***60	Washer; (5.3x25x1.6-mm Thk)	2
09***66	Washer; (Hard) (4.5x9x1mm Thk)	2
10***01	Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge)	2

See all parts with full part numbers in Heavy Parts AI →

284-5347 Wiring Gp-Steering Console

06***71	Terminal-Blade	13
09***66	Washer; (Hard) (4.5x9x1mm Thk)	2
10***01	Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge)	2
10***83	Plate	1

See all parts with full part numbers in Heavy Parts AI →

180-9324 Wiring Gp-Transmission

10***01	Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge)	1
15***70	Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness)	8
18***24	Wiring Group-Transmission	1
20***39	Clip As	1

See all parts with full part numbers in Heavy Parts AI →

Engine Arrangement

312-0255 Engine Ar-Complete

29***53	Module Group-Speedometer & Tach	1
31***55	Engine Ar-Complete	1
33***18	Reflector Group	1
33***41	Wiring Group-Front	1

See all parts with full part numbers in Heavy Parts AI →

312-0254 Engine Ar-Core

11***75	Starting Motor Group-Electric; (Cold Weather)	1
11***56	Fastener Group-Front Housing; (Housing)	1
11***27	Cover Group-Front Housing; -Accessory Drive	1
12***36	Pan Group-Oil; -Engine	1

See all parts with full part numbers in Heavy Parts AI →

Frame And Body

134-1080 Axle Gp-Front

03***60	Cup-Roller Bearing	2
03***61	Cone-Roller Bearing	2
0S***92	Bolt--Cover To Flywheel Housing	2
0V***75	Screw,Cap,Hexagon H Shaft Mtg,Accessory Drive	6

See all parts with full part numbers in Heavy Parts AI →

297-8449 Boss Gp-Frame

1F***39	Lug (3/8-16 Thd)	4
29***49	Boss Group-Frame	1
3G***90	Plate	3
4D***28	Coupling	2

See all parts with full part numbers in Heavy Parts AI →

295-8090 Box Gp-Battery

14***92	Bumper	4
16***23	Latch As	2
19***78	Washer-Hard; (13.5x30x12-mm Thk)	4
24***41	Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch)	2

See all parts with full part numbers in Heavy Parts AI →

283-7190 Bumper Gp-Rear

28***90	Bumper Group-Rear	1
29***93	Bumper As-Tow	1
7X***75	Bolt; (M24x3x60-mm)	8
8T***61	Washer-Hard-49mm Od X 28mm Id X 5mm Thk	8

See all parts with full part numbers in Heavy Parts AI →

284-5378 Bumper Gp-Rear

28***78	Bumper Group-Rear	1
28***79	Bumper As	1
7X***75	Bolt; (M24x3x60-mm)	6
8T***61	Washer-Hard-49mm Od X 28mm Id X 5mm Thk	6

See all parts with full part numbers in Heavy Parts AI →

311-8138 Case & Frame Gp

2A***98	Gasket	1
2R***00	Stud-Taperlock	38
31***38	Case & Frame Group	1
31***39	Case & Frame As	1

See all parts with full part numbers in Heavy Parts AI →

336-5530 Cover Gp-Access

12***49	Bracket As	4
22***12	Bracket	1
22***40	Film; (Warning) (Crush) (On Each Side Face Of Non Engine End Frame)	2
23***51	Bracket	1

See all parts with full part numbers in Heavy Parts AI →

311-2741 Enclosure Gp-Engine

11***57	Rod	2
13***65	Washer; (13.8x45x3-mm Thk)	6
16***99	Nut; (M12x1.5-Thd)	2
17***18	Handrail; (Top)	2

See all parts with full part numbers in Heavy Parts AI →

282-2496 Frame Gp-Front

11***45	Plate	2
14***61	Plate	1
14***20	Tape; (26.5-cm Each)	0
14***68	Cover; (Rh)	1

See all parts with full part numbers in Heavy Parts AI →

334-5760 Guard Gp-Bottom

1F***50	Nut Rops Support	3
33***60	Guard Group-Bottom	1
3B***40	Nipple-Pipe	2
7D***96	Pin Assem. (Tab)	2

See all parts with full part numbers in Heavy Parts AI →

8w-7030 Guard Gp-Cylinder

10***39	Spacer; (18.85x26.67x78-mm Thk)(3.91mm Thk)	4
10***80	Bracket As	2
1F***48	Nut 12.70 mm(.50 In.) Thread	2
7D***49	Washer (Flywheel Counter Balance Weight)	4

See all parts with full part numbers in Heavy Parts AI →

298-8895 Guard Gp-Drive Shaft

29***95	Guard Group-Drive Shaft; -Steering Pump	1
29***98	Guard As	1
29***49	Guard As	1
29***51	Guard	1

See all parts with full part numbers in Heavy Parts AI →

290-1148 Guard Gp-Platform

11***72	Clip As-Connector; (8-Pin)	1
12***49	Floor Mat	1
16***82	Grommet	1
16***14	Clip	1

See all parts with full part numbers in Heavy Parts AI →

282-2469 Guard Gp-Platform

11***72	Clip As-Connector; (8-Pin)	1
13***94	Pipe As	1
16***82	Grommet	1
16***14	Clip	1

See all parts with full part numbers in Heavy Parts AI →

106-4884 Hitch Gp-Articulating

0S***85	Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine	6
0S***87	Bolt-Bracket Assembly To Timing Gear	2
0S***89	Bolt, Hex. Hd., 5/8"-11 N.C. X 1 3/4"	4
10***84	Hitch Group-Articulating	1

See all parts with full part numbers in Heavy Parts AI →

7i-4610 Lines Gp-Lubrication

13***37	Tie Rod Group; (Rh Thread, Lh)(Rh Thread)(Left Side)	1
13***38	Tie Rod Group; (Lh Thread, Rh)(Lh Thread)(Right Side)	1
13***39	Tie Rod	1
13***43	Seal-Boot	1

See all parts with full part numbers in Heavy Parts AI →

131-3740 Link Gp-Steering

13***40	Link Group-Steering	1
23***23	Reflector-Red	2
23***24	Reflector-Amber	8
23***25	Reflector	2

See all parts with full part numbers in Heavy Parts AI →

332-1618 Reflector Gp

12***98	Plate; (Rh)	2
12***99	Plate; (Lh)	2
19***79	Step As	2
19***80	Step As	2

See all parts with full part numbers in Heavy Parts AI →

295-2933 Step Gp

03***44	Rivet (For Outside Japan); Rivet (For Outside Japan)	6
14***92	Bumper	4
16***23	Latch As	2
19***78	Washer-Hard; (13.5x30x12-mm Thk)	4

See all parts with full part numbers in Heavy Parts AI →

298-3520 Support Gp-Battery

19***82	Washer-Hard; (26x47x12-mm Thk)	4
27***04	Handhold	2
29***20	Support Group-Battery	1
29***06	Bracket As	1

See all parts with full part numbers in Heavy Parts AI →

299-8307 Support Gp-Radiator

20***89	Kit-Cartridge; (Desiccant)(Air Dryer)	1
20***90	Kit-Valve; (Cutoff)(Turbo Cutoff)	1
20***91	Kit-Check Valve	1
20***23	Kit-Heating Element; (Air Dryer)	1

See all parts with full part numbers in Heavy Parts AI →

Fuel System

282-2472 Control Gp-Governor

22***78	Seal-Ring; (Fuel And Water Sep Filter)	1
28***72	Control Group-Governor	1
32***44	Filter As-Water Sep & Fuel; (Primary)	1
34***27	Bowl As	1

See all parts with full part numbers in Heavy Parts AI →

174-9570 Filter Gp-Water Sep & Fuel

10***07	Seal-O-Ring; (Fuel System)	1
14***03	Seal-O-Ring; (Fuel System)	2
14***40	Ring-Backup; (37.36mm Od), Flasher Switch; Hazard, Replaces 421164a1, Flasher Switch	1
17***70	Filter Group-Water Sep & Fuel; -Primary	1

See all parts with full part numbers in Heavy Parts AI →

328-2585 Injector Gp-Fuel

03***62	Elbow, Swivel Nut 45 Degrees (-6)	1
03***48	Clip; (11.11mm .437in Id)	1
14***07	Adapter As	1
14***36	Adapter; (Straight) (-6 Orb X -6 Orfs)	1

See all parts with full part numbers in Heavy Parts AI →

311-2770 Lines Gp-Fuel

16***77	Plug As	1
16***67	Connector As	2
23***43	Regulator Group-Fuel Pressure	1
2R***06	Connector Valve Assembly To; Connector- Tube Assembly To Logic Valve	1

See all parts with full part numbers in Heavy Parts AI →

313-3967 Lines Gp-Fuel

18***99	Connector As	2
19***23	Adapter Group-Oil Line; -Fuel Injection Pump-Unit Injector Hydraulic Pump	1
20***80	Hose As	1
21***06	Tube As	1

See all parts with full part numbers in Heavy Parts AI →

191-0461 Lines Gp-Injector Hyd Pump

19***61	Lines Group-Injector Hydraulic Pump	1
21***68	Seal-O-Ring; (11.89-mm Id)	1
22***04	Seal-O-Ring; (Unit Injector Hydraulic Pump)	1
31***07	Pump Group-Unit Injector Hydraulic	1

See all parts with full part numbers in Heavy Parts AI →

254-0095 Pump & Mtg Gp-Unit Inj Hyd

23***51	Bolt-Socket Head; (M8x1.25x65-mm)	2
25***95	Pump & Mtg Group-Unit Inj Hydraulic	1
32***85	Injector Group-Fuel	1

See all parts with full part numbers in Heavy Parts AI →

268-1839 Pump Gp-Fuel Injection

17***70	Filter Group-Water Sep & Fuel; -Primary	1
19***70	Base Assembly; (Fuel Priming Pump)	1
26***39	Pump Group-Fuel Injection	1

See all parts with full part numbers in Heavy Parts AI →

190-8977 Pump Gp-Fuel Prm & Water Sep

19***77	Pump Group-Fuel Prm & Water Sep; -Primary Fuel Filter	1
29***20	Regulator As; (Fuel Pressure)	1
6V***49	Seal-O-Ring (Id=11.89mm); (11.89-mm Id)	1

See all parts with full part numbers in Heavy Parts AI →

232-0343 Regulator Gp-Fuel Pressure

00***86	Connector-Hose (1/4-18nptf Thd)	1
1H***06	Screw-Purge (1/2-20x1.625in); (1/2-20x1.625-In)	1
23***43	Regulator Group-Fuel Pressure	1
24***41	Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch)	1

See all parts with full part numbers in Heavy Parts AI →

311-2749 Tank Gp-Fuel

10***02	Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness)	1
18***35	Pin-Connector; (16-Ga To 18-Ga)	2
31***49	Tank Group-Fuel	1

See all parts with full part numbers in Heavy Parts AI →

Hydraulic System

162-7451 Accumulator & Mtg Gp-Hydraulic -Blade Cushion

285-4154 Accumulator Ar-Blade Cushion

11***10	Protector-Gas Valve	1
13***23	Piston	1
17***93	Kit-Seal; (Hydraulic Accumulator)	1
17***03	Film-Warning; (Accum, High Press, Read Omm)(Plate-Name)	1

See all parts with full part numbers in Heavy Parts AI →

162-7450 Accumulator Gp-Hydraulic -Charged

16***50

Accumulator Group-Hydraulic; -Blade Cushion

See all parts with full part numbers in Heavy Parts AI →

179-9398 Accumulator Gp-Hydraulic -Uncharged

13***99	Valve & Linkage Group; -5-Bank, Rh, Lh	1
17***98	Accumulator Group-Hydraulic; -Uncharged	1
30***39	Lines Group-Ripper	1

See all parts with full part numbers in Heavy Parts AI →

331-1506 Control Ar-Hydraulic -Ripper

11***18	Valve & Linkage Group; -4-Bank, Rh; 3-Bank, Lh	1
30***39	Lines Group-Ripper	1
33***06	Control Ar-Hydraulic; -Ripper	1

See all parts with full part numbers in Heavy Parts AI →

355-6244 Control Ar-Hydraulic -Accugrade

2K***20	Washer	12
35***44	Control Ar-Hydraulic; -Accugrade	1
6E***60	Cylinder Group-Articulation; -Rh	1
7K***17	Washer; 63.5mm(2.50in)Od	4

See all parts with full part numbers in Heavy Parts AI →

331-1507 Control Ar-Hydraulic -Ripper

30***39	Lines Group-Ripper	1
33***07	Control Ar-Hydraulic; -Ripper	1
33***10	Valve & Linkage Group; -4-Bank, Rh; 5-Bank, Lh	1

See all parts with full part numbers in Heavy Parts AI →

355-6243 Control Ar-Hydraulic

30***39	Lines Group-Ripper	1
34***65	Valve & Linkage Group; -6-Bank, Rh; 5-Bank, Lh	1
35***43	Control Ar-Hydraulic	1

See all parts with full part numbers in Heavy Parts AI →

331-1503 Control Ar-Hydraulic -Ripper

13***03	Valve & Linkage Group; -4-Bank, Rh, Lh	1
30***39	Lines Group-Ripper	1
33***03	Control Ar-Hydraulic; -Ripper	1

See all parts with full part numbers in Heavy Parts AI →

331-1501 Control Ar-Hydraulic -Dozer, Plow, Ripper

11***08	Valve & Linkage Group; -4-Bank, Rh; 5-Bank, Lh	1
30***39	Lines Group-Ripper	1
33***01	Control Ar-Hydraulic; -Dozer, Plow, Ripper	1

See all parts with full part numbers in Heavy Parts AI →

355-6242 Control Ar-Hydraulic

30***39	Lines Group-Ripper	1
34***74	Valve & Linkage Group; -6-Bank, Rh; 7-Bank, Lh	1
35***42	Control Ar-Hydraulic	1

See all parts with full part numbers in Heavy Parts AI →

331-1499 Control Ar-Hydraulic -Ripper

11***12	Valve & Linkage Group; -5-Bank, Rh, Lh	1
30***39	Lines Group-Ripper	1
33***99	Control Ar-Hydraulic; -Ripper	1

See all parts with full part numbers in Heavy Parts AI →

335-1875 Control Ar-Hydraulic -Ripper

30***39	Lines Group-Ripper	1
33***75	Control Ar-Hydraulic; -Ripper	1
34***75	Valve & Linkage Group; -6-Bank, Rh; 5-Bank, Lh	1

See all parts with full part numbers in Heavy Parts AI →

8w-2913 Cylinder & Mtg Gp-Scarifier

11***75	Cylinder Group-Sideshift	1
11***62	Bracket	1
1K***72	Locknut Horn To Guard	1
20***84	Bolt; (3/4-10x2.25-In)	4

See all parts with full part numbers in Heavy Parts AI →

112-5361 Cylinder & Mtg Gp-Articulation

11***61	Cylinder & Mtg Group-Articulation	1
13***29	Cylinder Group-Lift; -Blade	2
27***31	Bolt; (M12x1.75x100-mm)(M12x1.75x100-mm)	8
27***32	Washer; (13.5x25.5x3-mm Thk)	8

See all parts with full part numbers in Heavy Parts AI →

8x-1947 Cylinder & Mtg Gp-Blade Lift

13***91	Cylinder Group-Hydraulic; -Blade Tip	1
2G***67	Spacer	2
3B***29	Pin-Cotter	1
8D***87	Pin	1

See all parts with full part numbers in Heavy Parts AI →

8x-1943 Cylinder & Mtg Gp-Blade Tip

29***36	Bolt; (7/8-9x3.5-In)	4
29***39	Washer-Hard; (24x41.5x6-mm Thk)	4
2G***98	Cap	2
2G***03	Shim; 1.98mm(.078in) Thk	8

See all parts with full part numbers in Heavy Parts AI →

8x-1944 Cylinder & Mtg Gp-Centershift

16***10	Cylinder Group-Scarifier	1
5P***28	Capscrew; (Hex Hd) (1/2-13 Unc X 1.00, Gd 8 Z)	4
6G***87	Lock	2
7K***02	Seal (In The Rod Hole)	4

See all parts with full part numbers in Heavy Parts AI →

112-7463 Cylinder & Mtg Gp-Sideshift

11***63	Cylinder & Mtg Group-Sideshift	1
13***41	Cylinder Group-Steering; -Lh	1
13***42	Cylinder Group-Steering; -Rh	1
13***36	Tie Rod Group; (Steering)	2

See all parts with full part numbers in Heavy Parts AI →

8w-2290 Cylinder & Mtg Gp-Steering

0S***92	Bolt--Cover To Flywheel Housing	1
12***42	Cylinder Group-Wheel Lean	1
2G***67	Retainer	1
2G***09	Pin	1

See all parts with full part numbers in Heavy Parts AI →

8w-2737 Cylinder & Mtg Gp-Wheel Lean

16***90	Seal As-Buffer	1
17***79	Bolt-Hex Head; (M24x3.0x80mm)	1
17***96	Seal-O-Ring	1
18***43	Head	1

See all parts with full part numbers in Heavy Parts AI →

6e-1560 Cylinder Gp-Articulation

16***90	Seal As-Buffer	1
16***00	Seal-U-Cup	1
17***79	Bolt-Hex Head; (M24x3.0x80mm)	1
17***96	Seal-O-Ring	1

See all parts with full part numbers in Heavy Parts AI →

9t-8784 Cylinder Gp-Articulation

14***93	Head	1
16***95	Seal As-Buffer	1
16***04	Seal-U-Cup	1
17***83	Bolt-Hex Head; (M30x3.5x90mm)	1

See all parts with full part numbers in Heavy Parts AI →

6e-1343 Cylinder Gp-Centershift

13***94	Cylinder As	1
13***95	Rod As	1
16***86	Seal As-Buffer	1
16***94	Seal-U-Cup	1

See all parts with full part numbers in Heavy Parts AI →

131-7191 Cylinder Gp-Hydraulic

12***93	Rod As	1
13***91	Cylinder Group-Hydraulic; -Blade Tip	1
13***28	Cylinder As	1
14***93	Head	1

See all parts with full part numbers in Heavy Parts AI →

132-4929 Cylinder Gp-Lift -Blade

11***55	Cylinder As	1
11***56	Rod As	1
13***29	Cylinder Group-Lift; -Blade	1
17***83	Bolt-Hex Head; (M30x3.5x90mm)	1

See all parts with full part numbers in Heavy Parts AI →

113-7754 Cylinder Gp-Ripper

11***54	Cylinder Group-Ripper	1
16***90	Seal As-Buffer	1
16***08	Cylinder As	1
16***10	Rod As	1

See all parts with full part numbers in Heavy Parts AI →

165-2510 Cylinder Gp-Scarifier

11***35	Rod As	1
15***80	Washer-Hard; (26x44x22-mm Thk)	1
16***10	Cylinder Group-Scarifier	1
16***90	Seal As-Buffer	1

See all parts with full part numbers in Heavy Parts AI →

112-5575 Cylinder Gp-Sideshift

00***39	Bearing-Aligning; (Self Aligning)	1
11***75	Cylinder Group-Sideshift	1
13***44	Cylinder As; (Lh)	1
14***92	Boss As	1

See all parts with full part numbers in Heavy Parts AI →

130-9042 Cylinder Gp-Steering -Rh

12***45	Rod As	1
12***76	Cylinder As	1
13***42	Cylinder Group-Steering; -Rh	1
16***95	Seal As-Buffer	1

See all parts with full part numbers in Heavy Parts AI →

130-9041 Cylinder Gp-Steering -Lh

00***39	Bearing-Aligning; (Self Aligning)	1
13***41	Cylinder Group-Steering; -Lh	1
13***45	Cylinder As; (Rh)	1
14***92	Boss As	1

See all parts with full part numbers in Heavy Parts AI →

121-9242 Cylinder Gp-Wheel Lean

10***74	Retainer	1
10***75	Retainer	1
10***23	Spring	1
12***42	Cylinder Group-Wheel Lean	1

See all parts with full part numbers in Heavy Parts AI →

108-4916 Detent Gp-Control Valve -Plow, Bulldozer Lift

0S***85	Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine	4
10***96	Motor Group-Gerotor; -Circle Drive	1
10***16	Detent Group-Control Valve; -Plow, Bulldozer Lift	1
1A***15	Nut; (23/4x17/8-Thd)	1

See all parts with full part numbers in Heavy Parts AI →

5t-0570 Drive Gp-Circle

10***06	Hose As	1
11***40	Valve & Mounting Group; -Blade Cushion	2
13***44	Hose As	1
13***46	Hose As	1

See all parts with full part numbers in Heavy Parts AI →

166-3336 Lines Gp-Accumulator -Blade Cushion

11***99	Hose As	1
11***00	Hose As	1
14***18	Connector As	2
14***74	Elbow As	1

See all parts with full part numbers in Heavy Parts AI →

115-8078 Lines Gp-Hydraulic -Lh Blade Lift, Circle Drive

10***44	Hose As	2
10***49	Hose As	2
10***50	Hose As	1
11***78	Lines Group-Hydraulic; -Lh Blade Lift, Circle Drive-Lh	1

See all parts with full part numbers in Heavy Parts AI →

8x-6070 Lines Gp-Hydraulic -Scarifier

10***43	Hose As	2
10***44	Hose As	2
10***49	Hose As	2
10***50	Hose As	1

See all parts with full part numbers in Heavy Parts AI →

293-0648 Lines Gp-Hydraulic -Centershift Lock

10***02	Bolt-Socket Head; (M12x1.75x30-mm)	1
10***59	Elbow	1
10***86	Tube	1
11***83	Hose As	1

See all parts with full part numbers in Heavy Parts AI →

279-8138 Lines Gp-Hydraulic -Front

14***27	Hose As	1
14***36	Adapter; (Straight) (-6 Orb X -6 Orfs)	3
14***67	Elbow Group; (Each Includes)	2
14***78	Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs)	2

See all parts with full part numbers in Heavy Parts AI →

117-3855 Lines Gp-Hydraulic -Lh

11***99	Hose As	2
11***55	Lines Group-Hydraulic; -Lh	1
15***28	Elbow As	2
3D***24	O-Ring - For Oil Drain & Level Plug (Items 3 & 7)	1

See all parts with full part numbers in Heavy Parts AI →

114-0025 Lines Gp-Hydraulic -Bulldozer Lift, Plow, Lh

10***49	Hose As	2
10***50	Hose As	1
11***25	Lines Group-Hydraulic; -Bulldozer Lift, Plow, Lh	1
13***47	Hose As-Orfs	1

See all parts with full part numbers in Heavy Parts AI →

110-2985 Lines Gp-Hydraulic -Rh

11***85	Lines Group-Hydraulic; -Rh	1
11***27	Hose As	2
14***18	Connector As	1
16***05	Connector As	1

See all parts with full part numbers in Heavy Parts AI →

106-4787 Lines Gp-Hydraulic -Lh

10***36	Clip	1
10***87	Lines Group-Hydraulic; -Lh	1
10***40	Hose As	1
10***41	Hose As	1

See all parts with full part numbers in Heavy Parts AI →

299-5544 Lines Gp-Pump

14***47	Elbow; (-12 Orb/Orfs)	2
27***77	Hose As	1
29***44	Lines Group-Pump	1
3D***24	O-Ring - For Oil Drain & Level Plug (Items 3 & 7)	1

See all parts with full part numbers in Heavy Parts AI →

174-2339 Lines Gp-Ripper

14***74	Elbow As	2
17***39	Lines Group-Ripper; -Rear	1
1S***18	Clip (Large)	1
3K***60	Seal Pilot Manifold On; Seal To Boom Check Valve Drain	1

See all parts with full part numbers in Heavy Parts AI →

302-7139 Lines Gp-Ripper

10***36	Clip	1
11***37	Hose As	2
14***74	Elbow As	1
14***83	Elbow As	1

See all parts with full part numbers in Heavy Parts AI →

301-4376 Lines Gp-Steering

10***14	Hose As	2
10***10	Clamp	2
11***81	Hose As	1
13***30	Seal; (12.7mm Id)	1

See all parts with full part numbers in Heavy Parts AI →

164-8462 Lock Gp-Centershift

11***41	Pin	1
14***87	Cap	1
15***46	Valve Group-Solenoid; -Quick Coupler	1
16***62	Lock Group-Centershift	1

See all parts with full part numbers in Heavy Parts AI →

239-9893 Manifold Gp-Valve -Lh

23***93	Manifold Group-Valve; -Lh	1
24***89	Valve Group-Shuttle	1
24***51	Valve Group-Control	1
26***99	Valve Group-Solenoid & Manifold	1

See all parts with full part numbers in Heavy Parts AI →

239-9894 Manifold Gp-Valve -Rh

23***94	Manifold Group-Valve; -Rh	1
24***89	Valve Group-Shuttle	1
24***51	Valve Group-Control	1
26***98	Valve Group-Counterbalance	1

See all parts with full part numbers in Heavy Parts AI →

105-3196 Motor Gp-Gerotor

10***96	Motor Group-Gerotor; -Circle Drive	1
6Y***32	Bearing-Thrust	1
6Y***33	Ring-Thrust	2
6Y***34	Bearing-Roller	1

See all parts with full part numbers in Heavy Parts AI →

299-5543 Pump & Mtg Gp-Steering -Steering

11***59	Mounting As	4
1B***37	Key-Woodruff	1
1D***20	Nut,Plain,Hexagon Gear Mtg	1
29***43	Pump & Mtg Group-Steering; -Steering	1

See all parts with full part numbers in Heavy Parts AI →

6e-3136 Pump Gp-Piston

00***40	Cone-Roller Bearing	1
00***63	Ring	1
03***36	Seal-O-Ring	1
09***88	Pin, Spring	2

See all parts with full part numbers in Heavy Parts AI →

6e-6571 Rotating Gp-Pump

00***12	Cup-Roller Bearing	1
00***63	Ring	1
03***27	Seal-O-Ring; (19.18mm Id)	1
03***36	Seal-O-Ring	1

See all parts with full part numbers in Heavy Parts AI →

311-0514 Shaft Gp-Pump Drive

00***69	Ring	1
31***14	Shaft Group-Pump Drive	1
3T***49	Bolt-Socket Hd; (M6 X 1.0 X 25)	4
6E***04	Plate-Spacer	2

See all parts with full part numbers in Heavy Parts AI →

260-6502 Swivel Gp

10***10	Plate	2
10***11	Plate-Spacer	2
26***02	Swivel Group; -Circle Drive	1
3J***00	Ring-Retaining	1

See all parts with full part numbers in Heavy Parts AI →

214-1984 Tank & Filter Gp-Hydraulic

0L***78	Bolt 44.45 mm(1.75 In.) Long	12
0S***71	Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting	4
21***84	Tank & Filter Group-Hydraulic	1
29***00	Slip Joint Group	1

See all parts with full part numbers in Heavy Parts AI →

214-1983 Tank & Mtg Gp-Hydraulic

13***32	Block-Stop	2
21***83	Tank & Mtg Group-Hydraulic	1
8F***19	Seal (4.47 Degrees I.D.)	2

See all parts with full part numbers in Heavy Parts AI →

112-2240 Manifold Gp-Control

11***40	Valve & Mounting Group; -Blade Cushion	1
14***10	Valve Group-Solenoid; -Axle Oil Cooler-Hydraulic Lockout	1
8C***62	Manifold	1

See all parts with full part numbers in Heavy Parts AI →

331-1517 Valve & Linkage Gp -4-Bank, Rh, Lh

10***57	Lever; (Plow, Bulldozer Angle)	2
10***58	Lever; (Plow & Bulldozer Lift)	2
10***19	Plate As; (Rh)	1
10***29	Plate	2

See all parts with full part numbers in Heavy Parts AI →

331-1515 Valve & Linkage Gp -5-Bank, Rh; 7-Bank, Lh

10***57	Lever; (Plow, Bulldozer Angle)	2
10***58	Lever; (Plow & Bulldozer Lift)	1
10***19	Plate As; (Rh)	1
10***29	Plate	2

See all parts with full part numbers in Heavy Parts AI →

130-7603 Valve & Linkage Gp -4-Bank, Rh, Lh

10***57	Lever; (Plow, Bulldozer Angle)	1
10***58	Lever; (Plow & Bulldozer Lift)	1
10***19	Plate As; (Rh)	1
10***29	Plate	2

See all parts with full part numbers in Heavy Parts AI →

112-6804 Valve & Linkage Gp -4-Bank, Rh; 3-Bank, Lh

11***04	Valve & Linkage Group; -4-Bank, Rh; 3-Bank, Lh	1
21***84	Tank & Filter Group-Hydraulic	1
24***41	Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch)	1
4D***94	Clip-- Compressor Clutch Wire To Compressor Body	3

See all parts with full part numbers in Heavy Parts AI →

315-5330 Valve & Linkage Gp -5-Bank, Rh; 4-Bank, Lh

10***57	Lever; (Plow, Bulldozer Angle)	2
10***19	Plate As; (Rh)	1
10***29	Plate	2
10***40	Plate As; (Lh)	1

See all parts with full part numbers in Heavy Parts AI →

112-6795 Valve & Linkage Gp -4-Bank, Rh; 2-Bank, Lh

11***95	Valve & Linkage Group; -4-Bank, Rh; 2-Bank, Lh-Implement Control	1
17***07	Seal	2
17***08	Rotor	1
17***09	Retainer	1

See all parts with full part numbers in Heavy Parts AI →

115-0812 Valve & Linkage Gp -5-Bank, Rh, Lh

10***57	Lever; (Plow, Bulldozer Angle)	2
10***58	Lever; (Plow & Bulldozer Lift)	1
10***19	Plate As; (Rh)	1
10***29	Plate	2

See all parts with full part numbers in Heavy Parts AI →

315-5336 Valve & Linkage Gp -5-Bank, Rh; 7-Bank, Lh

10***57	Lever; (Plow, Bulldozer Angle)	2
10***58	Lever; (Plow & Bulldozer Lift)	2
10***97	Lever; (Plow, Bulldozer Angle)	1
10***19	Plate As; (Rh)	1

See all parts with full part numbers in Heavy Parts AI →

341-8565 Valve & Linkage Gp -6-Bank, Rh; 5-Bank, Lh

10***57	Lever; (Plow, Bulldozer Angle)	1
10***58	Lever; (Plow & Bulldozer Lift)	1
10***19	Plate As; (Rh)	1
10***29	Plate	2

See all parts with full part numbers in Heavy Parts AI →

315-5334 Valve & Linkage Gp -4-Bank, Rh; 5-Bank, Lh

10***57	Lever; (Plow, Bulldozer Angle)	1
10***58	Lever; (Plow & Bulldozer Lift)	2
10***19	Plate As; (Rh)	1
10***29	Plate	2

See all parts with full part numbers in Heavy Parts AI →

115-0808 Valve & Linkage Gp -4-Bank, Rh; 5-Bank, Lh

10***57	Lever; (Plow, Bulldozer Angle)	2
10***19	Plate As; (Rh)	1
10***29	Plate	2
10***40	Plate As; (Lh)	1

See all parts with full part numbers in Heavy Parts AI →

315-5333 Valve & Linkage Gp -5-Bank, Rh; 6-Bank, Lh

10***57	Lever; (Plow, Bulldozer Angle)	2
10***58	Lever; (Plow & Bulldozer Lift)	2
10***97	Lever; (Plow, Bulldozer Angle)	2
10***19	Plate As; (Rh)	1

See all parts with full part numbers in Heavy Parts AI →

115-0810 Valve & Linkage Gp -5-Bank, Rh, Lh

10***57	Lever; (Plow, Bulldozer Angle)	2
10***19	Plate As; (Rh)	1
10***29	Plate	2
10***40	Plate As; (Lh)	1

See all parts with full part numbers in Heavy Parts AI →

115-0811 Valve & Linkage Gp -4-Bank, Rh; 4-Bank, Lh

10***57	Lever; (Plow, Bulldozer Angle)	2
10***58	Lever; (Plow & Bulldozer Lift)	1
10***19	Plate As; (Rh)	1
10***29	Plate	2

See all parts with full part numbers in Heavy Parts AI →

315-5335 Valve & Linkage Gp -4-Bank, Rh, Lh

10***57	Lever; (Plow, Bulldozer Angle)	2
10***58	Lever; (Plow & Bulldozer Lift)	2
10***19	Plate As; (Rh)	1
10***29	Plate	2

See all parts with full part numbers in Heavy Parts AI →

331-1509 Valve & Linkage Gp -4-Bank, Rh; 5-Bank, Lh

10***57	Lever; (Plow, Bulldozer Angle)	2
10***58	Lever; (Plow & Bulldozer Lift)	1
10***19	Plate As; (Rh)	1
10***29	Plate	2

See all parts with full part numbers in Heavy Parts AI →

315-5329 Valve & Linkage Gp -6-Bank, Rh, Lh

10***57	Lever; (Plow, Bulldozer Angle)	2
10***19	Plate As; (Rh)	1
10***29	Plate	2
10***40	Plate As; (Lh)	1

See all parts with full part numbers in Heavy Parts AI →

331-1512 Valve & Linkage Gp -6-Bank, Rh, Lh

10***57	Lever; (Plow, Bulldozer Angle)	2
10***58	Lever; (Plow & Bulldozer Lift)	3
10***97	Lever; (Plow, Bulldozer Angle)	1
10***19	Plate As; (Rh)	1

See all parts with full part numbers in Heavy Parts AI →

138-7599 Valve & Linkage Gp -5-Bank, Rh, Lh

10***57	Lever; (Plow, Bulldozer Angle)	2
10***58	Lever; (Plow & Bulldozer Lift)	2
10***19	Plate As; (Rh)	1
10***29	Plate	2

See all parts with full part numbers in Heavy Parts AI →

331-1516 Valve & Linkage Gp -5-Bank, Rh; 6-Bank, Lh

10***57	Lever; (Plow, Bulldozer Angle)	2
10***58	Lever; (Plow & Bulldozer Lift)	2
10***97	Lever; (Plow, Bulldozer Angle)	2
10***19	Plate As; (Rh)	1

See all parts with full part numbers in Heavy Parts AI →

115-0804 Valve & Linkage Gp -4-Bank, Rh; 5-Bank, Lh

10***57	Lever; (Plow, Bulldozer Angle)	1
10***19	Plate As; (Rh)	1
10***29	Plate	2
10***40	Plate As; (Lh)	1

See all parts with full part numbers in Heavy Parts AI →

130-0464 Valve & Linkage Gp -4-Bank, Rh, Lh

10***57	Lever; (Plow, Bulldozer Angle)	2
10***58	Lever; (Plow & Bulldozer Lift)	2
10***19	Plate As; (Rh)	1
10***29	Plate	2

See all parts with full part numbers in Heavy Parts AI →

341-6674 Valve & Linkage Gp -6-Bank, Rh; 7-Bank, Lh

10***57	Lever; (Plow, Bulldozer Angle)	2
10***58	Lever; (Plow & Bulldozer Lift)	3
10***97	Lever; (Plow, Bulldozer Angle)	1
10***19	Plate As; (Rh)	1

See all parts with full part numbers in Heavy Parts AI →

331-1514 Valve & Linkage Gp -5-Bank, Rh, Lh

10***57	Lever; (Plow, Bulldozer Angle)	2
10***58	Lever; (Plow & Bulldozer Lift)	1
10***19	Plate As; (Rh)	1
10***29	Plate	2

See all parts with full part numbers in Heavy Parts AI →

112-6818 Valve & Linkage Gp -4-Bank, Rh; 3-Bank, Lh

10***57	Lever; (Plow, Bulldozer Angle)	1
10***19	Plate As; (Rh)	1
10***29	Plate	2
10***40	Plate As; (Lh)	1

See all parts with full part numbers in Heavy Parts AI →

112-6799 Valve & Linkage Gp -4-Bank, Rh; 3-Bank, Lh

08***07	Pin	1
11***99	Valve & Linkage Group; -4-Bank, Rh; 3-Bank, Lh	1
14***61	Spacer; (20x128x6-mm Thk)	1
1L***72	Dowel (Part Of 8s***99 Assem.)	1

See all parts with full part numbers in Heavy Parts AI →

341-6675 Valve & Linkage Gp

10***57	Lever; (Plow, Bulldozer Angle)	2
10***58	Lever; (Plow & Bulldozer Lift)	2
10***97	Lever; (Plow, Bulldozer Angle)	1
10***19	Plate As; (Rh)	1

See all parts with full part numbers in Heavy Parts AI →

315-5331 Valve & Linkage Gp

10***57	Lever; (Plow, Bulldozer Angle)	2
10***58	Lever; (Plow & Bulldozer Lift)	2
10***19	Plate As; (Rh)	1
10***29	Plate	2

See all parts with full part numbers in Heavy Parts AI →

331-1510 Valve & Linkage Gp -4-Bank, Rh; 5-Bank, Lh

10***57	Lever; (Plow, Bulldozer Angle)	1
10***58	Lever; (Plow & Bulldozer Lift)	1
10***19	Plate As; (Rh)	1
10***29	Plate	2

See all parts with full part numbers in Heavy Parts AI →

104-8672 Valve Gp-Bank 2 -Lh

10***57	Lever; (Plow, Bulldozer Angle)	2
10***58	Lever; (Plow & Bulldozer Lift)	3
10***97	Lever; (Plow, Bulldozer Angle)	2
10***19	Plate As; (Rh)	1

See all parts with full part numbers in Heavy Parts AI →

104-8673 Valve Gp-Bank 3 -Lh

10***57	Lever; (Plow, Bulldozer Angle)	2
10***58	Lever; (Plow & Bulldozer Lift)	2
10***97	Lever; (Plow, Bulldozer Angle)	1
10***19	Plate As; (Rh)	1

See all parts with full part numbers in Heavy Parts AI →

112-2581 Valve Gp-Bank 3 -Lh

10***09	Seal-Integral, . Gear; Ring	5
10***46	Cover	1
10***85	Manifold	1
11***21	Spacer	2

See all parts with full part numbers in Heavy Parts AI →

112-2580 Valve Gp-Bank 3 -Lh

10***57	Lever; (Plow, Bulldozer Angle)	2
10***58	Lever; (Plow & Bulldozer Lift)	2
10***97	Lever; (Plow, Bulldozer Angle)	1
10***19	Plate As; (Rh)	1

See all parts with full part numbers in Heavy Parts AI →

6e-3038 Valve Gp-Bank 4 -Lh

10***09	Seal-Integral, . Gear; Ring	6
10***46	Cover	1
10***85	Manifold	1
10***43	Valve Group-Control; -Scarifier-Lh	1

See all parts with full part numbers in Heavy Parts AI →

6e-3032 Valve Gp-Bank 4 -Rh

10***09	Seal-Integral, . Gear; Ring	5
10***46	Cover	1
10***85	Manifold	1
11***21	Spacer	1

See all parts with full part numbers in Heavy Parts AI →

130-7755 Valve Gp-Bank 4 -Lh

10***09	Seal-Integral, . Gear; Ring	5
10***46	Cover	1
10***38	Manifold	1
12***84	Valve Group-Control; -Blade Lift	1

See all parts with full part numbers in Heavy Parts AI →

124-3325 Valve Gp-Bank 4 -Rh

10***09	Seal-Integral, . Gear; Ring	6
10***46	Cover	1
10***85	Manifold	1
10***45	Valve Group-Control; -Ripper, Lh-Ripper	1

See all parts with full part numbers in Heavy Parts AI →

250-0543 Valve Gp-Bank 4 -Lh

10***09	Seal-Integral, . Gear; Ring	5
10***46	Cover	1
10***85	Manifold	1
12***83	Valve Group-Control; -Blade Lift	1

See all parts with full part numbers in Heavy Parts AI →

250-0544 Valve Gp-Bank 4 -Rh

10***09	Seal-Integral, . Gear; Ring	6
10***46	Cover	1
10***85	Manifold	1
10***43	Valve Group-Control; -Scarifier-Lh	1

See all parts with full part numbers in Heavy Parts AI →

124-3327 Valve Gp-Bank 4 -Lh

10***09	Seal-Integral, . Gear; Ring	5
10***46	Cover	1
10***38	Manifold	1
12***27	Valve Group-Bank 4; -Lh	1

See all parts with full part numbers in Heavy Parts AI →

130-7754 Valve Gp-Bank 4 -Lh

10***09	Seal-Integral, . Gear; Ring	5
10***46	Cover	1
10***85	Manifold	1
13***54	Valve Group-Bank 4; -Lh	1

See all parts with full part numbers in Heavy Parts AI →

124-3326 Valve Gp-Bank 5 -Rh

10***09	Seal-Integral, . Gear; Ring	6
10***46	Cover	1
10***85	Manifold	1
10***45	Valve Group-Control; -Ripper, Lh-Ripper	1

See all parts with full part numbers in Heavy Parts AI →

104-8671 Valve Gp-Bank 5 -Rh

10***09	Seal-Integral, . Gear; Ring	5
10***38	Manifold	1
10***71	Valve Group-Bank 5; -Rh	1
13***20	Bolt-Hex Head; (M10x1.50x160mm)	1

See all parts with full part numbers in Heavy Parts AI →

104-8646 Valve Gp-Bank 5 -Lh

10***09	Seal-Integral, . Gear; Ring	5
10***85	Manifold	1
10***46	Valve Group-Bank 5; -Lh	1
13***20	Bolt-Hex Head; (M10x1.50x160mm)	1

See all parts with full part numbers in Heavy Parts AI →

124-3328 Valve Gp-Bank 5 -Lh

10***09	Seal-Integral, . Gear; Ring	6
10***46	Cover	1
10***85	Manifold	1
10***43	Valve Group-Control; -Scarifier-Lh	1

See all parts with full part numbers in Heavy Parts AI →

124-3329 Valve Gp-Bank 5 -Lh

10***09	Seal-Integral, . Gear; Ring	6
10***46	Cover	1
10***38	Manifold	1
10***47	Valve Group-Control; -Bulldozer Lift, Plow	1

See all parts with full part numbers in Heavy Parts AI →

262-7291 Valve Gp-Bank 5 -Lh

10***09	Seal-Integral, . Gear; Ring	6
10***46	Cover	1
10***85	Manifold	1
10***45	Valve Group-Control; -Ripper, Lh-Ripper	1

See all parts with full part numbers in Heavy Parts AI →

104-8645 Valve Gp-Bank 5 -Lh

10***09	Seal-Integral, . Gear; Ring	6
10***46	Cover	1
10***85	Manifold	1
10***45	Valve Group-Bank 5; -Lh	1

See all parts with full part numbers in Heavy Parts AI →

250-0548 Valve Gp-Bank 5 -Rh

10***09	Seal-Integral, . Gear; Ring	6
10***46	Cover	1
10***38	Manifold	1
12***84	Valve Group-Control; -Blade Lift	1

See all parts with full part numbers in Heavy Parts AI →

250-0550 Valve Gp-Bank 5 -Lh

10***09	Seal-Integral, . Gear; Ring	6
10***46	Cover	1
10***85	Manifold	1
10***43	Valve Group-Control; -Scarifier-Lh	1

See all parts with full part numbers in Heavy Parts AI →

250-0567 Valve Gp-Bank 6 -Lh

10***09	Seal-Integral, . Gear; Ring	7
10***46	Cover	1
10***85	Manifold	1
13***20	Bolt-Hex Head; (M10x1.50x160mm)	1

See all parts with full part numbers in Heavy Parts AI →

341-6220 Valve Gp-Bank 6 -Rh

10***09	Seal-Integral, . Gear; Ring	7
10***46	Cover	1
10***38	Manifold	1
10***47	Valve Group-Control; -Bulldozer Lift, Plow	1

See all parts with full part numbers in Heavy Parts AI →

341-6226 Valve Gp-Bank 6 -Rh

10***09	Seal-Integral, . Gear; Ring	7
10***85	Manifold	1
13***21	Bolt-Hex Head; (M10x1.5x120mm)	3
13***20	Bolt-Hex Head; (M10x1.50x160mm)	1

See all parts with full part numbers in Heavy Parts AI →

250-0565 Valve Gp-Bank 6 -Rh

10***09	Seal-Integral, . Gear; Ring	6
10***85	Manifold	1
10***43	Valve Group-Control; -Scarifier-Lh	1
13***19	Bolt-Hex Head; (M10x1.50x80mm)	3

See all parts with full part numbers in Heavy Parts AI →

341-6224 Valve Gp-Bank 6 -Rh

10***09	Seal-Integral, . Gear; Ring	7
10***38	Manifold	1
10***47	Valve Group-Control; -Bulldozer Lift, Plow	1
11***07	Valve Group-Control; -Bulldozer Angle, Plow, Rh	1

See all parts with full part numbers in Heavy Parts AI →

104-8648 Valve Gp-Bank 6 -Lh

10***09	Seal-Integral, . Gear; Ring	6
10***38	Manifold	1
10***48	Valve Group-Bank 6; -Lh	1
10***47	Valve Group-Control; -Bulldozer Lift, Plow	1

See all parts with full part numbers in Heavy Parts AI →

115-1008 Valve Gp-Bank 6 -Rh

10***09	Seal-Integral, . Gear; Ring	6
10***85	Manifold	1
10***45	Valve Group-Control; -Ripper, Lh-Ripper	1
11***08	Valve Group-Bank 6; -Rh	1

See all parts with full part numbers in Heavy Parts AI →

104-8647 Valve Gp-Bank 7 -Lh

10***09	Seal-Integral, . Gear; Ring	7
10***46	Cover	1
10***38	Manifold	1
10***47	Valve Group-Bank 7; -Lh	1

See all parts with full part numbers in Heavy Parts AI →

341-6222 Valve Gp-Bank 7 -Lh

10***09	Seal-Integral, . Gear; Ring	7
10***38	Manifold	1
12***85	Valve Group-Control; -Bulldozer Lift, Plow	1
13***21	Bolt-Hex Head; (M10x1.5x120mm)	3

See all parts with full part numbers in Heavy Parts AI →

263-6435 Valve Gp-Bank 7 -Lh

10***09	Seal-Integral, . Gear; Ring	7
10***46	Cover	1
10***38	Manifold	1
11***07	Valve Group-Control; -Bulldozer Angle, Plow, Rh	1

See all parts with full part numbers in Heavy Parts AI →

9t-5957 Valve Gp-Combination

10***09	Seal-Integral, . Gear; Ring	8
10***46	Cover	1
10***85	Manifold	1
10***43	Valve Group-Control; -Scarifier-Lh	1

See all parts with full part numbers in Heavy Parts AI →

107-0545 Valve Gp-Control -Ripper

10***71	Lever; (Blade Lift)	1
10***73	Retainer	4
10***78	Cover	1
10***84	Body	1

See all parts with full part numbers in Heavy Parts AI →

137-8106 Valve Gp-Control -Wing Lift

10***70	Lever As; (Blade Lift)	1
10***71	Lever; (Blade Lift)	1
10***73	Retainer	4
10***78	Cover	1

See all parts with full part numbers in Heavy Parts AI →

6e-3030 Valve Gp-Control -Wheel Lean

10***48	Stem	1
10***70	Lever As; (Blade Lift)	1
10***71	Lever; (Blade Lift)	1
10***73	Retainer	4

See all parts with full part numbers in Heavy Parts AI →

124-2885 Valve Gp-Control -Bulldozer Lift, Plow

10***70	Lever As; (Blade Lift)	1
10***71	Lever; (Blade Lift)	1
10***73	Retainer	4
10***78	Cover	1

See all parts with full part numbers in Heavy Parts AI →

124-2884 Valve Gp-Control -Blade Lift

10***70	Lever As; (Blade Lift)	1
10***71	Lever; (Blade Lift)	1
10***73	Retainer	4
10***80	Housing	1

See all parts with full part numbers in Heavy Parts AI →

6e-3029 Valve Gp-Control -Centershift

10***21	Valve Group-Relief; -Direct Operated	1
13***50	Valve Group-Purge; -Hydraulic Steering-Implement Signal	1
14***08	Plug As.	3
17***93	Plug As	2

See all parts with full part numbers in Heavy Parts AI →

6e-3031 Valve Gp-Control -Blade Lift

10***48	Stem	1
10***70	Lever As; (Blade Lift)	1
10***71	Lever; (Blade Lift)	1
10***73	Retainer	4

See all parts with full part numbers in Heavy Parts AI →

137-8104 Valve Gp-Control -Wing Tilt

10***71	Lever; (Blade Lift)	1
10***73	Retainer	4
10***78	Cover	1
10***82	Lever As; (Blade Lift)	1

See all parts with full part numbers in Heavy Parts AI →

115-1007 Valve Gp-Control -Bulldozer Angle, Plow, Rh

10***48	Stem	1
10***71	Lever; (Blade Lift)	1
10***73	Retainer	4
10***78	Cover	1

See all parts with full part numbers in Heavy Parts AI →

107-0543 Valve Gp-Control -Scarifier

10***71	Lever; (Blade Lift)	1
10***73	Retainer	4
10***78	Cover	1
10***82	Lever As; (Blade Lift)	1

See all parts with full part numbers in Heavy Parts AI →

4z-6189 Valve Gp-Control -Scarifier

10***09	Seal-Integral, . Gear; Ring	8
10***85	Manifold	1
10***43	Valve Group-Control; -Scarifier-Lh	1
13***20	Bolt-Hex Head; (M10x1.50x160mm)	4

See all parts with full part numbers in Heavy Parts AI →

124-2883 Valve Gp-Control -Blade Lift

10***48	Stem	1
10***71	Lever; (Blade Lift)	1
10***73	Retainer	4
10***78	Cover	1

See all parts with full part numbers in Heavy Parts AI →

6e-3037 Valve Gp-Control -Bulldozer

10***55	Stem	1
10***71	Lever; (Blade Lift)	1
10***73	Retainer	4
10***78	Cover	1

See all parts with full part numbers in Heavy Parts AI →

6e-3035 Valve Gp-Control -Circle Drive

10***54	Stem	1
10***70	Lever As; (Blade Lift)	1
10***71	Lever; (Blade Lift)	1
10***73	Retainer	4

See all parts with full part numbers in Heavy Parts AI →

6e-3028 Valve Gp-Control -Articulation

10***09	Seal-Integral, . Gear; Ring	8
10***46	Cover	1
10***85	Manifold	1
10***45	Valve Group-Control; -Ripper, Lh-Ripper	1

See all parts with full part numbers in Heavy Parts AI →

6e-3034 Valve Gp-Control -Blade Tip

10***49	Stem	1
10***70	Lever As; (Blade Lift)	1
10***71	Lever; (Blade Lift)	1
10***73	Retainer	4

See all parts with full part numbers in Heavy Parts AI →

107-0547 Valve Gp-Control -Dozer Lift, Plow

10***71	Lever; (Blade Lift)	1
10***73	Retainer	4
10***80	Housing	1
10***82	Lever As; (Blade Lift)	1

See all parts with full part numbers in Heavy Parts AI →

6e-3036 Valve Gp-Control -Sideshift

10***70	Lever As; (Blade Lift)	1
10***71	Lever; (Blade Lift)	1
10***73	Retainer	4
10***80	Housing	1

See all parts with full part numbers in Heavy Parts AI →

104-3122 Valve Gp-Pump Control -Pressure, Flow Compensator-Implement, Steering

10***70	Lever As; (Blade Lift)	1
10***71	Lever; (Blade Lift)	1
10***73	Retainer	4
10***78	Cover	1

See all parts with full part numbers in Heavy Parts AI →

131-8350 Valve Gp-Purge

10***71	Lever; (Blade Lift)	1
10***73	Retainer	4
10***78	Cover	1
10***82	Lever As; (Blade Lift)	1

See all parts with full part numbers in Heavy Parts AI →

6e-3033 Valve Gp-Relief

03***27	Seal-O-Ring; (19.18mm Id)	1
03***36	Seal-O-Ring	1
10***16	Pin-Spring Stop	1
12***32	Setscrew-Socket; (M8x1.25x45-mm)	2

See all parts with full part numbers in Heavy Parts AI →

106-7390 Valve Gp-Relief

10***90	Valve Group-Relief; -Blade Lift	1
3G***26	Nut; (3/8-40-Thd)	1
3J***07	Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve	1
4D***97	Seal 15.6 mm(.614 In.) I.D.	1

See all parts with full part numbers in Heavy Parts AI →

4t-4935 Valve Gp-Relief

10***71	Lever; (Blade Lift)	1
10***73	Retainer	4
10***78	Cover	1
10***82	Lever As; (Blade Lift)	1

See all parts with full part numbers in Heavy Parts AI →

222-7774 Valve Gp-Relief

11***54	Valve	1
11***35	Retainer As	1
22***74	Valve Group-Relief; -Bulldozer Lift, Plow	1
2A***11	Washer; (5.5x12.3x0.8-mm Thk)	1

See all parts with full part numbers in Heavy Parts AI →

100-6021 Valve Gp-Relief

10***21	Valve Group-Relief; -Direct Operated	1
10***90	Valve Group-Relief; -Blade Lift	1
6E***04	Valve Group-Relief; -Blade Lift	1

See all parts with full part numbers in Heavy Parts AI →

6e-4704 Valve Gp-Relief

3K***60	Seal Pilot Manifold On; Seal To Boom Check Valve Drain	2
4T***42	Spring	1
4T***71	Plate	1
6E***35	Retainer Assem.	1

See all parts with full part numbers in Heavy Parts AI →

6e-4703 Valve Gp-Relief

10***44	Valve	1
13***70	Sleeve	1
6E***03	Valve Group-Relief; -Implement Signal	1

See all parts with full part numbers in Heavy Parts AI →

139-8474 Valve Gp-Relief

10***57	Valve	1
12***61	Housing	1
13***74	Valve Group-Relief; -Lift	1
3J***54	Packing,Preformed Part Of Kit P/N 5r***27	1

See all parts with full part numbers in Heavy Parts AI →

139-8472 Valve Gp-Relief

13***72	Valve Group-Relief; -Ripper	1
3G***26	Nut; (3/8-40-Thd)	1
3J***07	Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve	1
4D***97	Seal 15.6 mm(.614 In.) I.D.	1

See all parts with full part numbers in Heavy Parts AI →

4t-1860 Valve Gp-Shuttle

11***35	Retainer As	1
13***77	Valve	1
2A***11	Washer; (5.5x12.3x0.8-mm Thk)	1
2J***89	Springs	1

See all parts with full part numbers in Heavy Parts AI →

149-2610 Valve Gp-Solenoid

11***35	Retainer As	1
13***77	Valve	1
14***10	Valve Group-Solenoid; -Axle Oil Cooler-Hydraulic Lockout	1
2A***11	Washer; (5.5x12.3x0.8-mm Thk)	1

See all parts with full part numbers in Heavy Parts AI →

152-8346 Valve Gp-Solenoid

11***35	Retainer As	1
13***77	Valve	1
15***46	Valve Group-Solenoid; -Quick Coupler	1
2A***11	Washer; (5.5x12.3x0.8-mm Thk)	1

See all parts with full part numbers in Heavy Parts AI →

Implements

6g-2944 Circle Gp

14***03	Seal-O-Ring	1
14***04	Ring-Backup	2
14***05	Ring-Backup	2
1M***18	Ball	1

See all parts with full part numbers in Heavy Parts AI →

153-9360 Circle Gp

15***60	Circle Group	1
4D***75	Lug (Small)	2
5T***89	Brace; (Rh)	1
5T***90	Brace; (Lh)	1

See all parts with full part numbers in Heavy Parts AI →

112-7486 Circle Gp

10***02	Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness)	1
11***43	Locknut; (5/16-18-Thd)	1
11***86	Circle Group	1
14***11	Cartridge Assem.	1

See all parts with full part numbers in Heavy Parts AI →

113-9422 Circle Gp

10***02	Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness)	1
10***36	Kit-Seal; (Solenoid Valve)	1
11***43	Locknut; (5/16-18-Thd)	1
11***22	Circle Group	1

See all parts with full part numbers in Heavy Parts AI →

338-7509 Circle Gp

10***39	Spacer; (18.85x26.67x78-mm Thk)(3.91mm Thk)	8
10***55	Bearing-Sleeve	1
10***80	Bracket As	4
11***60	Bracket As; (Rh)	1

See all parts with full part numbers in Heavy Parts AI →

8x-1960 Drawbar Gp

1D***03	Washer; (45.25x76.2x6.35-mm Thk)	2
2A***89	Bearing-Sleeve	2
2B***73	Nut-Castle; (1-3/4-5-Thd)(1 3/4-5 Thd)	2
2K***19	Washer 1.59mm (.065 In.) Thick; (0.766x3.5x0.065-In Thk)	4

See all parts with full part numbers in Heavy Parts AI →

336-1559 Plate Gp-Push

13***40	Brace As	1
14***43	Plate; (Lh)	1
14***44	Plate; (Rh)	1
15***85	Beam-Blade; (Rh)	1

See all parts with full part numbers in Heavy Parts AI →

Lubrication System

191-0523 Adapter Gp-Oil Line -Fuel Injection Pump

13***17	Spring	5
13***98	Shaft Assem.	1
13***02	Stand; (End)	1
13***03	Stand; (End)	1

See all parts with full part numbers in Heavy Parts AI →

222-5946 Breather Gp

03***27	Seal-O-Ring; (19.18mm Id)	1
19***22	Adapter	1
22***46	Breather Group; -Crankcase	1

See all parts with full part numbers in Heavy Parts AI →

323-8936 Filter Gp-Engine Oil

14***54	Bolt; (M8x1.25x105-mm)	1
16***10	Breather As; (Crankcase)	1
32***36	Filter Group-Engine Oil	1
5N***85	Washer-Sealing; (Sealing)	1

See all parts with full part numbers in Heavy Parts AI →

220-1194 Fumes Disposal Gp

11***82	Seal-O-Ring; (16.36mm Id)	1
1R***07	Filter As-Engine Oil; (Advanced Efficiency)	1
20***74	Base As-Oil Filter; (Engine)	1
21***66	Seal-O-Ring; (Engine Oil)	1

See all parts with full part numbers in Heavy Parts AI →

276-3681 Gauge Gp-Oil Level (Dipstick) -Engine

16***48	Stud; (M8x1.25x40-mm, M8x1.25x17.5-mm)	1
22***10	Hose-Disposal; (Fumes Disposal)	1
27***81	Gauge Group-Oil Level (Dipstick); -Engine	1
2S***53	Clip; (34.92mm Id)	1

See all parts with full part numbers in Heavy Parts AI →

253-2589 Lines Gp-Engine Oil

25***89	Lines Group-Engine Oil	1
3E***53	Washer-Hard; (11x25x3-mm Thk)	2
3P***56	Seal-O-Ring; (21.82mm Id)	2
4W***32	Elbow-Outlet	1

See all parts with full part numbers in Heavy Parts AI →

128-0316 Lines Gp-Engine Oil

12***16	Lines Group-Engine Oil	1
19***31	Clip	1
1F***67	Clip 7t***28 Cable As To Fan Shroud	1
1S***63	Plug; (Mounted-Bottom	3

See all parts with full part numbers in Heavy Parts AI →

310-6469 Lines Gp-Engine Oil Drain

03***33	Seal-O-Ring; (12.42mm Id)	1
12***09	Elbow	1
12***58	Clamp-Hose	1
14***53	Hose; (272.2-cm)	0

See all parts with full part numbers in Heavy Parts AI →

187-6279 Lines Gp-Turbocharger Oil

14***53	Hose; (272.2-cm)	0
18***79	Lines Group-Turbocharger Oil	1
20***69	Valve-Drain; (Transmission Oil)	1
21***74	Lockwasher	1

See all parts with full part numbers in Heavy Parts AI →

237-8063 Manifold Gp-Engine Oil

03***48	Clip; (11.11mm .437in Id)	1
14***78	Elbow, 90°,-6 Orb /-6 Orfs; (90°) (-6 Orbx-6orfs)	1
18***99	Connector As	1
18***94	Hose As-Oil Supply	1

See all parts with full part numbers in Heavy Parts AI →

212-2270 Pump Gp-Engine Oil

18***77	Pump Group-Engine Oil	1
21***70	Pump Group-Engine Oil	1
7W***37	Shaft-Oil Pump	1
7W***38	Washer; (10.5x38x1.6-mm Thk)	1

See all parts with full part numbers in Heavy Parts AI →

200-4497 Pump Gp-Engine Oil

20***97	Pump Group-Engine Oil	1
22***96	Manifold-Oil; (Engine)	1
3J***07	Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve	4
4F***29	Seal (1.171" Inside Diameter)	1

See all parts with full part numbers in Heavy Parts AI →

Machine Arrangement

274-7940 General Ar

10***84	Hitch Group-Articulating	1
11***85	Lines Group-Hydraulic; -Rh	1
11***19	Box Group-Tool	1
11***61	Cylinder & Mtg Group-Articulation	1

See all parts with full part numbers in Heavy Parts AI →

340-1191 Option Ar-Cab -High Profile

19***66	Mirror Group-Rear View; -Dual Interior	1
28***28	Converter Ar-Electrical; -High Profile	1
29***91	Installation Ar-Radio	1
34***91	Option Ar-Cab; -High Profile	1

See all parts with full part numbers in Heavy Parts AI →

339-4964 Option Ar-Cab -Non Rops/Fops

12***58	Mirror Group-Rear View; -Exterior	1
12***47	Seat Group; -Vinyl	1
28***25	Wiper Group-Window; -Front	1
31***51	Air Conditioner Ar	1

See all parts with full part numbers in Heavy Parts AI →

339-4967 Option Ar-Cab

12***58	Mirror Group-Rear View; -Exterior	1
12***47	Seat Group; -Vinyl	1
28***25	Wiper Group-Window; -Front	1
29***53	Module Group-Speedometer & Tach	1

See all parts with full part numbers in Heavy Parts AI →

339-4966 Option Ar-Cab -High Profile

12***58	Mirror Group-Rear View; -Exterior	1
12***47	Seat Group; -Vinyl	1
28***25	Wiper Group-Window; -Front	1
29***53	Module Group-Speedometer & Tach	1

See all parts with full part numbers in Heavy Parts AI →

339-4965 Option Ar-Cab -High Profile

12***58	Mirror Group-Rear View; -Exterior	1
12***47	Seat Group; -Vinyl	1
28***25	Wiper Group-Window; -Front	1
31***27	Indicator Group-Level	1

See all parts with full part numbers in Heavy Parts AI →

339-4969 Option Ar-Cold Weather -Starting

28***58	Battery & Wiring Group; -Wet	1
31***01	Wiring Group-Ether Starting Aid	1
31***37	Air Dryer Group	1
31***71	Starting Aid Group-Ether	1

See all parts with full part numbers in Heavy Parts AI →

339-4976 Option Ar-Lighting -Snow Wing

18***79	Mounting Group-Snow Wing	1
28***77	Lighting Group-Flood; -Snow Wing	1
29***45	Lighting Ar-Roading	1
33***76	Option Ar-Lighting; -Snow Wing	1

See all parts with full part numbers in Heavy Parts AI →

339-4971 Option Ar-Ripper

30***37	Lines Group-Pump, . Body	1
33***00	Grade Control Ar	1
33***71	Option Ar-Ripper	1

See all parts with full part numbers in Heavy Parts AI →

339-4978 Option Ar-Work Tool

10***04	Scarifier Ar; -Vee Type	1
11***25	Lines Group-Hydraulic; -Bulldozer Lift, Plow, Lh	1
14***80	Blade Group-Bulldozer	1
27***38	Lines Group-Hydraulic; -Blade, Front	1

See all parts with full part numbers in Heavy Parts AI →

339-4972 Option Ar-Work Tool

28***83	Ripper Ar	1
33***60	Guard Group-Bottom	1
33***59	Plate Group-Push	1
33***72	Option Ar-Work Tool; -Scarifier	1

See all parts with full part numbers in Heavy Parts AI →

339-4975 Option Ar-Work Tool

11***25	Lines Group-Hydraulic; -Bulldozer Lift, Plow, Lh	1
27***38	Lines Group-Hydraulic; -Blade, Front	1
28***83	Ripper Ar	1
33***60	Guard Group-Bottom	1

See all parts with full part numbers in Heavy Parts AI →

339-4973 Option Ar-Work Tool

33***60	Guard Group-Bottom	1
33***73	Option Ar-Work Tool	1
34***09	Scarifier Ar; -Vee Type	1

See all parts with full part numbers in Heavy Parts AI →

359-1520 Roading Ar -With Cab

10***98	Bit Group-End	1
28***06	Edge Group-Cutting	1
32***27	Blade & Tip Ar-Power	1
35***20	Roading Ar; -With Cab	1

See all parts with full part numbers in Heavy Parts AI →

Operator Station

171-7186 Accessory Gp-Cab -High Profile

12***07	Plate	2
12***54	Strip-Wear	11
15***83	Shim; (0.12-mm Thk)	1
17***86	Accessory Group-Cab; -High Profile	1

See all parts with full part numbers in Heavy Parts AI →

171-7185 Accessory Gp-Cab -Low Profile

10***39	Spacer; (18.85x26.67x78-mm Thk)(3.91mm Thk)	8
10***55	Bearing-Sleeve	1
10***80	Bracket As	4
15***80	Shaft	1

See all parts with full part numbers in Heavy Parts AI →

125-9854 Adjuster Gp-Seat

10***02	Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness)	1
11***11	Socket-Auxiliary Power; (12-Volt)(Power Port)	1
12***54	Adjuster Group-Seat	1
12***78	Locknut; (M6x1-Thd)	2

See all parts with full part numbers in Heavy Parts AI →

116-2779 Adjuster Gp-Seat

11***53	Plate	1
11***79	Adjuster Group-Seat	1
16***80	Bolt; (M20x2.5x75-mm)	8
28***78	Washer-Hard; (22x45x10-mm Thk)	8

See all parts with full part numbers in Heavy Parts AI →

173-1028 Adjuster Gp-Seat

10***02	Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness)	1
11***11	Socket-Auxiliary Power; (12-Volt)(Power Port)	1
12***78	Locknut; (M6x1-Thd)	2
13***53	Plate	1

See all parts with full part numbers in Heavy Parts AI →

308-5633 Air Conditioner & Heater Gp

11***15	Angle As; (Rh)	1
11***16	Angle As; (Lh)	1
11***27	Support As	1
2K***73	Locknut Inside Guard Assembly	8

See all parts with full part numbers in Heavy Parts AI →

311-2751 Air Conditioner Ar

11***86	Anchor	1
11***92	Rod	1
13***38	Washer-Plastic; (13x31.7x0.8-mm Thk)	2
13***44	Latch Assem.; (Lh)	1

See all parts with full part numbers in Heavy Parts AI →

289-7545 Air Conditioner Gp

03***38	Clamp	1
10***02	Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness)	1
10***05	Kit-Receptacle; (6-Pin)(Display Monitor Harness)	1
10***91	Screw; (Flat Head) (No.6-20x0.5in)	8

See all parts with full part numbers in Heavy Parts AI →

202-7668 Armrest Gp -Lh

17***91	Duct & Control Group; -A/C, Heater Distributor	1
20***68	Armrest Group; -Lh	1
28***45	Air Conditioner Group	1
31***03	Wiring Group-Air Conditioner	1

See all parts with full part numbers in Heavy Parts AI →

202-7666 Armrest Gp -Rh

17***91	Duct & Control Group; -A/C, Heater Distributor	1
20***66	Armrest Group; -Rh	1
28***45	Air Conditioner Group	1
29***31	Condenser & Mtg Group-Refrigerant	1

See all parts with full part numbers in Heavy Parts AI →

320-0341 Cab Ar -Non Rops/Fops

14***88	Locknut-Flange; (3/8-16-Thd)	1
16***13	Bracket As	1
1F***50	Nut Rops Support	1
21***00	Pad As	1

See all parts with full part numbers in Heavy Parts AI →

290-1126 Cab Ar -Non-Rops

12***72	Pad; (1035mm X 150mm)	1
19***36	Pad	1
29***26	Cab Ar; -Non-Rops	1
30***33	Air Conditioner & Heater Group	1

See all parts with full part numbers in Heavy Parts AI →

290-1127 Cab Gp -High Profile

12***42	Washer Group-Window; -Front	1
17***78	Insulation Group-Weather	1
28***53	Panel Group-Instrument	1
29***27	Cab Group; -High Profile	2

See all parts with full part numbers in Heavy Parts AI →

284-5398 Canopy Ar

12***42	Washer Group-Window; -Front	1
12***44	Mounting Group-Cab; -Non-Rops, Enclosed	1
17***78	Insulation Group-Weather	1
21***13	Wiper Group-Window; -Front-High Profile	1

See all parts with full part numbers in Heavy Parts AI →

311-2800 Compressor Gp-Refrigerant

10***72	Glass; (Rear)(High Profile)	1
10***53	Mounting	4
10***15	Pad (Rh)	1
10***16	Pad (Lh)	1

See all parts with full part numbers in Heavy Parts AI →

163-0872 Compressor Gp-Refrigerant

16***72	Compressor Group-Refrigerant; -Air Conditioner	1
21***08	Cab As; (Non-Rops)	1
8X***13	Door Group-Cab; -High Profile	1

See all parts with full part numbers in Heavy Parts AI →

295-4431 Condenser & Mtg Gp-Refrigerant

10***02	Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness)	1
12***67	Pin-Connector; (14-Ga To 16-Ga)(14-Ga Wire)	2
29***31	Condenser & Mtg Group-Refrigerant	1
31***18	Valve As-Pressure Relief; (Refrigerant Compressor)	1

See all parts with full part numbers in Heavy Parts AI →

335-1419 Condenser & Mtg Gp-Refrigerant

16***72	Compressor Group-Refrigerant; -Air Conditioner	1
18***72	Belt-Serpentine	1
19***76	Washer-Hard; (8.8x20x8-mm Thk)	4
26***26	Support	1

See all parts with full part numbers in Heavy Parts AI →

167-9002 Console Gp-Operator

16***02	Console Group-Operator	1
25***82	Core As-Condenser; (Refrigerant)	1
29***00	Bracket	1
30***34	Bracket	1

See all parts with full part numbers in Heavy Parts AI →

282-2475 Console Gp-Operator

14***90	Plate As	1
16***21	Gate As	1
16***80	Plate As	1
17***22	Cover	1

See all parts with full part numbers in Heavy Parts AI →

282-2473 Control Gp-Clutch

03***35	Bolt-Self Locking; 2.22cm(.875 In.) Lg	1
03***66	Rod	1
03***94	Pin	1
09***66	Washer; (Hard) (4.5x9x1mm Thk)	6

See all parts with full part numbers in Heavy Parts AI →

7i-4718 Control Gp-Steering

11***10	Grommet	1
12***73	Bolt-12 Point Head; (3/8-16x1.25-In)(3/8-16thd)	1
13***00	Clip; (Tab)	1
14***85	Nut-Weld; (M10 X 1.5 Thd)	1

See all parts with full part numbers in Heavy Parts AI →

8x-4318 Door Gp-Cab -High Profile-Lh

10***41	Plate As	1
10***50	Latch As-Rh	1
10***52	Link-Tag-Rh	1
11***90	Seal	1

See all parts with full part numbers in Heavy Parts AI →

8x-4317 Door Gp-Cab -High Profile-Rh

09***00	Steering Wheel	1
11***73	Bolt-12 Point Head; (M10x1.5x35-mm)	4
14***95	Nut; (13/16-20-Thd)	1
22***69	Pump Group-Metering; (Hmu)	1

See all parts with full part numbers in Heavy Parts AI →

8x-4413 Door Gp-Cab -High Profile

10***41	Plate As	1
10***49	Latch As; (Lh)	1
10***51	Link-Tag-Lh	1
11***90	Seal	1

See all parts with full part numbers in Heavy Parts AI →

177-7891 Duct & Control Gp -A/C, Heater Distributor

10***53	Bumper-Conical	4
10***13	Plate As	2
12***28	Seal; (17.2-cm Each)	0
12***43	Plate As	2

See all parts with full part numbers in Heavy Parts AI →

7i-5015 Duct Gp-Cab Air -Air Conditioner, Heater

13***95	Panel As	1
16***74	Louver As-Vent	2
7I***15	Duct Group-Cab Air; -Air Conditioner, Heater	1
7K***01	Nut-Speed; (44.5mm Oal)	2

See all parts with full part numbers in Heavy Parts AI →

286-4416 Fan Gp-Circulating -Defroster, Rear

17***34	Fan Group-Circulating; -Defrost	1
28***16	Fan Group-Circulating; -Defroster, Rear	1
3E***21	Actuator-Rocker; (Defroster)	1
3E***25	Lamp; (24-Volt)	1

See all parts with full part numbers in Heavy Parts AI →

170-5334 Fan Gp-Circulating

17***34	Fan Group-Circulating; -Defrost	1
17***35	Motor Group-Electric; -Circulating Fan	1
1B***13	Bolt,Machine Governor And Decelerator Control	1
1M***30	Nut And Lock Assem.; (No. 10-32)	2

See all parts with full part numbers in Heavy Parts AI →

286-4415 Fan Gp-Circulating -Front Defroster

03***55	Locknut; (5/16-18-Thd)(Marked X)	1
13***79	Bracket	1
17***35	Motor Group-Electric; -Circulating Fan	1
1B***13	Bolt,Machine Governor And Decelerator Control	1

See all parts with full part numbers in Heavy Parts AI →

170-4820 Fan Gp-Circulating -Defroster, Rear

10***91	Screw; (Flat Head) (No.6-20x0.5in)	8
10***96	Bracket As	6
12***54	Duct	1
12***55	Duct	1

See all parts with full part numbers in Heavy Parts AI →

8x-2925 Filter Gp-Cab Air

17***20	Fan Group-Circulating; -Defroster, Rear-Rear	1
3E***21	Actuator-Rocker; (Defroster)	1
3E***25	Lamp; (24-Volt)	1
3E***30	Switch As; (Window Wiper)	1

See all parts with full part numbers in Heavy Parts AI →

293-5950 Guard Gp-Vandalism

11***55	Spring-Filter	4
13***92	Retainer-Captive	2
23***86	Filter Element As-Cab Air; (Cab)	1
23***87	Filter Element As-Cab Air	2

See all parts with full part numbers in Heavy Parts AI →

173-5360 Heater & Mtg Gp-Cab

17***60	Heater & Mtg Group-Cab; -Light Duty	1
24***41	Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch)	1
29***51	Support As	1
29***54	Support	1

See all parts with full part numbers in Heavy Parts AI →

311-2753 Heater Ar-Cab

17***47	Heater Group-Cab; -Light Duty	1
31***53	Heater Ar-Cab	1
9W***41	Fuse; (15-Ampere)	1

See all parts with full part numbers in Heavy Parts AI →

174-4547 Heater Gp-Cab

17***60	Heater & Mtg Group-Cab; -Light Duty	1
17***47	Heater Group-Cab; -Light Duty	1
17***03	Louver Group-Cab	1
31***73	Lines Group-Heater	1

See all parts with full part numbers in Heavy Parts AI →

295-4371 Horn Gp-Electric

03***38	Clamp	1
10***02	Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness)	1
10***05	Kit-Receptacle; (6-Pin)(Display Monitor Harness)	1
12***18	Cover	1

See all parts with full part numbers in Heavy Parts AI →

113-5808 Housing Gp-Seat Suspension

00***84	Spring-Horn	4
00***85	Brush-Horn	4
09***71	Seal-Horn Button	1
09***67	Button; (Air Horn)	1

See all parts with full part numbers in Heavy Parts AI →

315-5327 Indicator Gp-Level

09***78	Pin-Spring	1
10***24	Kit-Indicator; (Weight Adjustment)(Suspension Seat)	1
10***79	Kit-Bumper; (Weight Adjustment)(Suspension Seat)	1
10***86	Follower Kit; (Includes Follower, Pin)	1

See all parts with full part numbers in Heavy Parts AI →

295-7991 Installation Ar-Radio

22***69	Indicator-Level	1
29***91	Installation Ar-Radio	1

See all parts with full part numbers in Heavy Parts AI →

339-5313 Installation Gp-Radio -Non-Rops

29***33	Cable As	1
2A***84	Bracket	1
2G***67	Washer; (10.5x60x3-mm Thk)	1
33***13	Bushing, Installation Group-Radio; -Non-Rops	1

See all parts with full part numbers in Heavy Parts AI →

293-6529 Installation Gp-Radio

28***30	Converter Group-Electrical; -Radio	1
29***29	Installation Group-Radio	2

See all parts with full part numbers in Heavy Parts AI →

172-5378 Insulation Gp-Weather

09***66	Washer; (Hard) (4.5x9x1mm Thk)	2
10***55	Cover-Speaker	2
10***25	Screw-Machine; (8-32x1-In)	8
17***32	Bolt-Hex Head; (M4x0.7x16mm)	2

See all parts with full part numbers in Heavy Parts AI →

294-8588 Liner Gp-Cab

11***64	Boot	8
17***65	Duct	2
17***90	Seal	2
17***38	Seal	2

See all parts with full part numbers in Heavy Parts AI →

337-7998 Liner Gp-Cab -Enclosed, High Profile

09***92	Locknut; (M6x1-Thd)	3
10***14	Knob	4
12***20	Panel As-Cab	1
12***84	Insulation	1

See all parts with full part numbers in Heavy Parts AI →

311-2772 Lines Gp-Air Conditioner

10***55	Cover-Speaker	2
10***25	Screw-Machine; (8-32x1-In)	8
10***14	Knob	4
10***04	Door	2

See all parts with full part numbers in Heavy Parts AI →

348-8158 Lines Gp-Air Conditioner

06***51	Clamp	1
08***91	Bolt; (M10x1.5x55-mm)	1
10***02	Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness)	1
11***33	Switch As-Pressure; (A/C)	1

See all parts with full part numbers in Heavy Parts AI →

311-2773 Lines Gp-Heater

06***51	Clamp	1
08***91	Bolt; (M10x1.5x55-mm)	1
10***02	Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness)	1
11***33	Switch As-Pressure; (A/C)	1

See all parts with full part numbers in Heavy Parts AI →

178-8603 Louver Gp-Cab

13***26	Seal-O-Ring; (19.28mm Od)	1
15***37	Elbow As	1
15***58	Connector	1
16***16	Adapter As	1

See all parts with full part numbers in Heavy Parts AI →

123-4358 Mirror Gp-Rear View -Exterior

12***58	Mirror Group-Rear View; -Exterior	1
1P***78	Cap	2
2G***41	Clamp	2
2G***42	Arm	2

See all parts with full part numbers in Heavy Parts AI →

286-4798 Mirror Gp-Rear View -Heated

1P***78	Cap	4
20***80	Mirror	1
23***14	Mirror As; (Rh, Lh)	2
28***98	Mirror Group-Rear View; -Heated	1

See all parts with full part numbers in Heavy Parts AI →

8x-2795 Mirror Gp-Rear View -Inside

12***35	Plate	2
12***36	Plate	2
16***74	Louver As-Vent	2
5P***69	Seal .9m (35 In.); (0.01-M Each)	0

See all parts with full part numbers in Heavy Parts AI →

197-2066 Mirror Gp-Rear View -Dual Interior

11***18	Arm	2
12***86	Block	4
12***87	Bracket	4
19***66	Mirror Group-Rear View; -Dual Interior	1

See all parts with full part numbers in Heavy Parts AI →

287-3260 Module Gp-Quad Gauge

10***02	Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness)	1
11***18	Arm	2
12***86	Block	4
12***87	Bracket	4

See all parts with full part numbers in Heavy Parts AI →

293-4153 Module Gp-Speedometer & Tach

10***05	Kit-Receptacle; (6-Pin)(Display Monitor Harness)	1
11***86	Track Group	1
18***33	Voltmeter Group; (Quad Gauge Module)	1
18***34	Indicator As-Articulation; (Articulation)	1

See all parts with full part numbers in Heavy Parts AI →

Monitor Group

12***79	Film-Instruction; (Engine Oil Drain)	1
12***80	Film-Instruction; (Hydraulic Tank Oil Drain)	1
13***58	Film; (Identification) (On Radiator Filler Cap) (On Near Of Radiator Filler Cap)	1
15***90	Film-Identification; (Water Separator)	2

See all parts with full part numbers in Heavy Parts AI →

125-4344 Mounting Gp-Cab -Non-Rops, Enclosed

12***44	Mounting Group-Cab; -Non-Rops, Enclosed	1
12***74	Tube-Heat Shrink; (5.72-mm Dia)(950-cm)	0
15***74	Kit-Connecting Plug; (6-Pin)(Cat Electronic Display Harness)	3
18***36	Socket-Connector; (16-Ga To 18-Ga)	6

See all parts with full part numbers in Heavy Parts AI →

2a-6985 Mounting Gp-Rops

10***53	Mounting	4
10***15	Pad (Rh)	1
10***16	Pad (Lh)	1
12***06	Seal; (87-cm)	0

See all parts with full part numbers in Heavy Parts AI →

301-4173 Pan Gp-Backrest

03***35	Bolt-Self Locking; 2.22cm(.875 In.) Lg	2
10***71	Pin As	2
10***53	Mounting	4
10***15	Pad (Rh)	1

See all parts with full part numbers in Heavy Parts AI →

8x-2385 Panel Gp-Cab -High Profile

13***43	Plate As-Lumbar	1
16***83	Knob-Lumbar	1
25***28	Plug	3
26***94	Pan As-Backrest	1

See all parts with full part numbers in Heavy Parts AI →

316-5238 Panel Gp-Instrument -Open

09***66	Washer; (Hard) (4.5x9x1mm Thk)	4
10***01	Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge)	1
10***05	Kit-Receptacle; (6-Pin)(Display Monitor Harness)	1
10***06	Receptacle Kit; (Includes Wedge And Receptacle Assem.)	1

See all parts with full part numbers in Heavy Parts AI →

335-6989 Panel Gp-Instrument -Enclosed

09***66	Washer; (Hard) (4.5x9x1mm Thk)	4
10***83	Lamp; (24-Volt)(Implement Indicators)	4
11***48	Lamp; (24-Volt, 3-Watt)(Clear)(Fuel Level Gauge)	10
13***40	Resistor As-Connection; (3-Pin)	1

See all parts with full part numbers in Heavy Parts AI →

316-5237 Panel Gp-Instrument -Enclosed

09***66	Washer; (Hard) (4.5x9x1mm Thk)	4
10***91	Screw; (Flat Head) (No.6-20x0.5in)	12
10***83	Lamp; (24-Volt)(Implement Indicators)	4
11***48	Lamp; (24-Volt, 3-Watt)(Clear)(Fuel Level Gauge)	10

See all parts with full part numbers in Heavy Parts AI →

286-7853 Panel Gp-Instrument

10***72	Glass; (Rear)(High Profile)	1
11***06	Glass; (Side)	2
14***09	Glass; (Lower Front)	2
16***30	Film; (Sunshade-Caterpillar)	1

See all parts with full part numbers in Heavy Parts AI →

210-2270 Recliner Gp-Seat

09***66	Washer; (Hard) (4.5x9x1mm Thk)	4
10***91	Screw; (Flat Head) (No.6-20x0.5in)	12
10***83	Lamp; (24-Volt)(Implement Indicators)	4
11***48	Lamp; (24-Volt, 3-Watt)(Clear)(Fuel Level Gauge)	11

See all parts with full part numbers in Heavy Parts AI →

284-5400 Rops Ar -High Profile, Open

03***14	Bolt-Self Locking; (1/4unc X 1/2)	1
10***67	Washer-Hard; (7.2x25x2-mm Thk)	1
17***90	Spring	1
17***62	Bracket; (Seat Belt)(Seat Belt)	1

See all parts with full part numbers in Heavy Parts AI →

320-0342 Rops Ar -Enclosed, High Profile

28***97	Rops Group; -High Profile, Open	1
29***48	Guard Group-Platform	1
32***42	Rops Ar; -Enclosed, High Profile	1

See all parts with full part numbers in Heavy Parts AI →

173-6756 Rops Gp -High Profile

17***78	Insulation Group-Weather	1
17***31	Wiper Group-Window; -Front-High Profile	1
17***56	Rops Group; -Enclosed, High Profile	1
21***02	Film-Warning; (No Weld, No Drill, Read Omm)	2

See all parts with full part numbers in Heavy Parts AI →

348-2795 Rops Gp

03***35	Bolt-Self Locking; 2.22cm(.875 In.) Lg	2
10***72	Glass; (Rear)(High Profile)	1
10***71	Pin As	2
10***53	Mounting	4

See all parts with full part numbers in Heavy Parts AI →

284-5397 Rops Gp -High Profile, Open

15***12	Plate-Warning; (Ops Certification, Read Omm)	1
18***56	Plate Group-Certification	1
28***97	Rops Group; -High Profile, Open	1
4B***58	Screw (Identification Plate) Mounting	4

See all parts with full part numbers in Heavy Parts AI →

290-0349 Rops Gp -Enclosed

15***12	Plate-Warning; (Ops Certification, Read Omm)	1
18***56	Plate Group-Certification	1
29***49	Rops Group; -Enclosed	1
4B***58	Screw (Identification Plate) Mounting	4

See all parts with full part numbers in Heavy Parts AI →

139-4612 Screen Gp-Sun -Rear

13***12	Screen Group-Sun; -Rear	1
17***56	Rops Group; -Enclosed, High Profile	1
8X***13	Door Group-Cab; -High Profile	1

See all parts with full part numbers in Heavy Parts AI →

222-0345 Seat Belt Gp -Retractable

13***03	Screen Group-Sun	1
13***05	Plate As	1
22***45	Seat Belt Group; -Retractable	1
5C***53	Bolt (M6x1.00x16mm); (M6x1x16mm Thk)	4

See all parts with full part numbers in Heavy Parts AI →

116-1965 Seat Belt Gp -Retractable

11***65	Seat Belt Group; -Retractable	1
11***98	Rops Group; -High Profile, Open	1

See all parts with full part numbers in Heavy Parts AI →

8y-3912 Seat Gp -Cloth

1A***50	Bolt (7/16-20x1.75in); (7/16-20x1.75-In)	1
4D***32	Locknut (7/16-20 Thd)	1
8S***34	Locknut; (Flange) (7/16-20 Thd)	2
8T***81	Bolt; (7/16-20x1-In)	1

See all parts with full part numbers in Heavy Parts AI →

8y-4005 Seat Gp -Vinyl

8Y***05

Seat Group; -Vinyl

See all parts with full part numbers in Heavy Parts AI →

126-2747 Seat Gp -Vinyl

12***56	Seat Group-Static	1
12***47	Seat Group; -Vinyl	1
24***41	Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch)	1
5P***00	Key Total 2 Pieces Per Unit; (Literature Compartment)	1

See all parts with full part numbers in Heavy Parts AI →

113-4254 Seat Gp -Vinyl

03***43	Nut; (5/16-18 Thd)	4
11***54	Seat Group; -Vinyl	1
11***36	Screw-Flat Head; (5/16-18x0.875-In)	4
5B***72	Washer; (9.7x19x0.8-mm Thk)(Plain)	4

See all parts with full part numbers in Heavy Parts AI →

301-4174 Seat Gp -Cloth

11***65	Seat Belt Group; -Retractable	1
24***41	Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch)	1
30***74	Seat Group; -Cloth	1
5P***00	Key Total 2 Pieces Per Unit; (Literature Compartment)	1

See all parts with full part numbers in Heavy Parts AI →

125-9855 Seat Gp

03***43	Nut; (5/16-18 Thd)	4
11***36	Screw-Flat Head; (5/16-18x0.875-In)	4
12***55	Seat Group	1
5B***72	Washer; (9.7x19x0.8-mm Thk)(Plain)	4

See all parts with full part numbers in Heavy Parts AI →

175-1504 Seat Gp -Cloth

03***21	Bolt; (5/16-18x0.625-In)	4
17***04	Seat Group; -Cloth	1
1F***99	Rivet-Head	2
5P***57	Sleeve (Not Shown)	1

See all parts with full part numbers in Heavy Parts AI →

8x-8940 Seat Gp-Static -Cloth

0T***44	Bolt (1.25" Long)	1
17***84	Extension Group-Backrest; (Cloth)	1
17***37	Spacer; (11.7x19.8x20.3-mm Thk)(Lh Seat Side)	1
20***66	Armrest Group; -Rh	1

See all parts with full part numbers in Heavy Parts AI →

8y-6852 Seat Gp-Static -Vinyl

11***65	Seat Belt Group; -Retractable	1
8Y***51	Seat Group-Static; -Cloth	1
8Y***52	Seat Group-Static; -Vinyl	1
9X***41	Screw-Truss Head (M10x1.50x20mm); (Truss Head) (M10x1.5x20mm)	1

See all parts with full part numbers in Heavy Parts AI →

125-9856 Seat Gp-Static

08***68	Washer; (13x27.5x2.5-mm Thk)	2
11***79	Adjuster Group-Seat	1
11***94	Boot As	1
12***56	Seat Group-Static	1

See all parts with full part numbers in Heavy Parts AI →

8y-6851 Seat Gp-Static -Cloth

09***43	Pin-Cotter	2
14***88	Locknut-Flange; (3/8-16-Thd)	8
16***25	Cushion As	1
17***30	Screw-Button Head; (3/8-16x1-In)	6

See all parts with full part numbers in Heavy Parts AI →

322-8548 Seat Gp-Suspension -Cloth

03***55	Locknut; (5/16-18-Thd)(Marked X)	4
12***54	Adjuster Group-Seat	1
12***55	Seat Group	1
32***48	Seat Group-Suspension; -Cloth	1

See all parts with full part numbers in Heavy Parts AI →

302-8814 Seat Gp-Suspension -Cloth

08***68	Washer; (13x27.5x2.5-mm Thk)	2
11***79	Adjuster Group-Seat	1
11***94	Boot As	1
1F***50	Nut Rops Support	1

See all parts with full part numbers in Heavy Parts AI →

174-4546 Support Gp-Seat

16***89	Block-Slider	4
17***87	Setscrew; (1/4-20-Thd)	4
17***35	Block Kit; (Includes Bolt, Washers, Blocks And Setscrews)	1
17***46	Support Group-Seat	1

See all parts with full part numbers in Heavy Parts AI →

302-7458 Suspension Gp-Seat

17***52	Retainer	1
17***07	Holder	1
30***58	Suspension Group-Seat	1
30***14	Seat Group-Suspension; -Cloth, Bracket	1

See all parts with full part numbers in Heavy Parts AI →

8x-2650 Valve Gp-Air Control

12***18	Cover	1
12***01	Seal	1
12***08	Tube As	2
17***92	Cover	1

See all parts with full part numbers in Heavy Parts AI →

8x-9680 Washer Gp-Window -Rear

12***21	Bolt	3
2D***06	Pin	1
2G***85	Kit-Air Control Valve; (Service Brake)	1
2R***94	Plate-Brake Valve	1

See all parts with full part numbers in Heavy Parts AI →

8x-9675 Washer Gp-Window -Front

10***03	Fastener	20
10***94	Kit-Tether Belt; (Suspension Seat)(Seat Suspension)	1
10***95	Kit-Suspension Roller; (Suspension Seat)(Seat Suspension)	1
11***08	Housing Group-Seat Suspension	1

See all parts with full part numbers in Heavy Parts AI →

125-4342 Washer Gp-Window -Front

10***45	Cover	1
10***65	Pad; (Round)	1
12***42	Washer Group-Window; -Front	1
14***95	Hose; (650-cm Each)	0

See all parts with full part numbers in Heavy Parts AI →

150-5107 Window Gp-Cab -Lh

13***32	Window Group-Cab; -Side Sliding-High Profile	2
15***07	Window Group-Cab; -Lh	1

See all parts with full part numbers in Heavy Parts AI →

139-6128 Window Gp-Cab -Side Sliding-Low Profile

10***58	Nut; (10x32-mm)	2
10***46	Stop-Slide	2
13***28	Window Group-Cab; -Side Sliding-Low Profile	1
13***32	Latch As	1

See all parts with full part numbers in Heavy Parts AI →

134-8232 Window Gp-Cab -Side Sliding-High Profile

13***32	Window Group-Cab; -Side Sliding-High Profile	1
14***95	Hose; (650-cm Each)	0
3V***16	Nozzle As; (Rear)	1
4D***88	Clip-(Slot To Fit Fastener M10 Or 3/8)	1

See all parts with full part numbers in Heavy Parts AI →

150-5106 Window Gp-Cab -Rh

13***33	Window Group-Cab; -Side Sliding-Low Profile	2
15***06	Window Group-Cab; -Rh	1

See all parts with full part numbers in Heavy Parts AI →

134-8233 Window Gp-Cab -Side Sliding-Low Profile

10***45	Cover	1
10***65	Pad; (Round)	1
13***33	Window Group-Cab; -Side Sliding-Low Profile	1
14***95	Hose; (650-cm Each)	0

See all parts with full part numbers in Heavy Parts AI →

139-6129 Window Gp-Cab -Side Sliding High Profile

10***58	Nut; (10x32-mm)	2
10***46	Stop-Slide	2
13***29	Window Group-Cab; -Side Sliding High Profile	1
13***32	Latch As	1

See all parts with full part numbers in Heavy Parts AI →

126-0961 Window Gp-Vent -Cab

12***08	Spacer; (10.31x17.45x50.8-mm Thk)	1
12***09	Plate	1
12***10	Plate	1
12***28	Catch-Stop	1

See all parts with full part numbers in Heavy Parts AI →

298-2426 Wiper Ar-Window -Rear

15***06	Window Group-Cab; -Rh	1
15***07	Window Group-Cab; -Lh	1
29***26	Wiper Ar-Window; -Rear	1
5P***69	Seal .9m (35 In.); (0.01-M Each)	0

See all parts with full part numbers in Heavy Parts AI →

298-2425 Wiper Ar-Window -Rear

12***08	Spacer; (10.31x17.45x50.8-mm Thk)	1
12***09	Plate	1
12***10	Plate	1
12***28	Catch-Stop	1

See all parts with full part numbers in Heavy Parts AI →

286-4822 Wiper Gp-Window -Rear

10***05	Kit-Receptacle; (6-Pin)(Display Monitor Harness)	1
12***54	Arm-Window Wiper; (Front, Lower)	2
12***55	Blade As-Wiper; (335-mm)(High Profile Front Lower)	2
12***03	Shaft As; (Wiper Lower Rh)	1

See all parts with full part numbers in Heavy Parts AI →

286-4825 Wiper Gp-Window -Front

01***16	Setscrew; (8-32x0.5-In)	1
11***85	Knob-Wiper Switch; (Rear)	1
13***11	Motor Group-Window Wiper; (24-Volt, 2-Speed)(Front)	1
20***24	Motor Group-Window Wiper; (24-Volt)(Front, Upper)	1

See all parts with full part numbers in Heavy Parts AI →

172-6831 Wiper Gp-Window -Front-High Profile

17***31	Wiper Group-Window; -Front-High Profile	1
28***22	Wiper Group-Window; -Rear	1
8X***80	Washer Group-Window; -Rear	1

See all parts with full part numbers in Heavy Parts AI →

286-4823 Wiper Gp-Window -Rear

10***05	Kit-Receptacle; (6-Pin)(Display Monitor Harness)	1
13***11	Motor Group-Window Wiper; (24-Volt, 2-Speed)(Front)	1
18***35	Pin-Connector; (16-Ga To 18-Ga)	5
20***24	Motor Group-Window Wiper; (24-Volt)(Front, Upper)	1

See all parts with full part numbers in Heavy Parts AI →

211-4913 Wiper Gp-Window -Front-High Profile

21***13	Wiper Group-Window; -Front-High Profile	1
28***23	Wiper Group-Window; -Rear, Air Inlet Tube	1
8X***80	Washer Group-Window; -Rear	1

See all parts with full part numbers in Heavy Parts AI →

Power Train

295-8278 Autoshift Ar

10***61	Switch As-Rocker; (Autoshift)	1
29***78	Autoshift Ar; -Transmission	1
3E***63	Switch As; (24-Volt)(Rear Floodlight)	1
3E***84	Actuator-Rocker	1

See all parts with full part numbers in Heavy Parts AI →

333-9308 Base Gp-Oil Filter -Power Train

16***77	Switch Group-Bypass; -Xmsn Lubrication Supply Filter-Xmsn Lubrication Charge Filter-Hoist Screen-Tc, Front Brake Cooling-Transmission Oil Filter-Rear Axle Oil Filter	1
33***08	Base Group-Oil Filter	1
33***79	Spring	1
33***80	Spring	1

See all parts with full part numbers in Heavy Parts AI →

277-6433 Case & Parts Gp-Planetary

11***45	Plate As	1
13***00	Clip; (Tab)	1
14***73	Guard As	1
14***39	Lock	3

See all parts with full part numbers in Heavy Parts AI →

6g-1755 Chain Gp-Drive

6G***31	Link (Connector)	1
6G***33	Chain Group; (Tandem)	4
6G***55	Chain Group	1

See all parts with full part numbers in Heavy Parts AI →

235-2412 Clutch Gp-Transmission -Forward

10***51	Disc-Friction	2
13***25	Gear As; (50-Teeth)(50 Teeth)	1
15***08	Piston	2
15***27	Disc-Friction	1

See all parts with full part numbers in Heavy Parts AI →

8e-9316 Clutch Gp-Transmission -Hi & Lo

10***81	Spring-Wave	1
13***19	Bearing-Roller (Inner)	1
13***35	Gear As; (45-Teeth)	1
21***39	Hub As	1

See all parts with full part numbers in Heavy Parts AI →

235-2413 Clutch Gp-Transmission -Reverse, Second

10***81	Spring-Wave	1
13***19	Bearing-Roller (Inner)	1
13***28	Gear As; (44-Teeth)	1
15***08	Piston	1

See all parts with full part numbers in Heavy Parts AI →

6y-2303 Clutch Gp-Transmission -1st & 3rd

10***81	Spring-Wave	2
13***19	Bearing-Roller (Inner)	1
13***30	Gear As; (54-Teeth)	1
13***33	Gear As; (79-Teeth)	1

See all parts with full part numbers in Heavy Parts AI →

316-8363 Control Gp-Differential Lock

12***61	Actuator-Rocker; (Differential Lock)	1
13***00	Clip; (Tab)	1
13***41	Adapter-90 Degree	1
13***19	Switch As-Rocker; (Differential Lock)	1

See all parts with full part numbers in Heavy Parts AI →

281-3165 Control Gp-Transmission Hyd

18***24	Wiring Group-Transmission	1
19***57	Block	1
1T***38	Washer	31
28***63	Valve Group-Transmission Control	1

See all parts with full part numbers in Heavy Parts AI →

281-5641 Cooler Gp-Transmission Oil

24***85	Plug As	2
24***17	Core As-Hydraulic Oil Cooler	1
28***41	Cooler Group-Transmission Oil	1
29***77	Bracket As	4

See all parts with full part numbers in Heavy Parts AI →

337-3357 Coupling Gp-Torsional

26***60	Bolt; (M10x1.5x30-mm)	12
28***99	Coupling As	1
33***57	Coupling Group-Torsional	1
6V***39	Washer-Hard-Alt Strap To Fan Drive Belt	12

See all parts with full part numbers in Heavy Parts AI →

8w-5430 Differential & Bevel Gear Gp

03***35	Bolt-Self Locking; 2.22cm(.875 In.) Lg	2
03***57	Bolt; --To Reverse Shaft Bearing Retainer & Forward Shaft Bearing Retainer	5
0S***56	Bolt 4 1/4 In. (108 mm) --Front Support Assembly To Frame	4
12***03	Seal-Lip Type; (7602mm Id)	1

See all parts with full part numbers in Heavy Parts AI →

316-8469 Differential Ar

31***63	Control Group-Differential Lock	1
31***69	Differential Ar	1
8T***21	Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm)	1
8T***37	Bolt (M10x1.50x20mm)	1

See all parts with full part numbers in Heavy Parts AI →

154-2688 Differential Gp

0S***73	Bolt (102mm Long); (1/2-13x4-In)	12
10***82	Gear-Bevel; (24-Teeth)	1
10***83	Gear-Bevel; (24-Teeth)	1
15***88	Differential Group	1

See all parts with full part numbers in Heavy Parts AI →

8w-4368 Drive Gp-Final

03***35	Bolt-Self Locking; 2.22cm(.875 In.) Lg	18
12***81	Gear-Planetary; (26-Teeth)	6
19***73	Shaft-Sun Gear; (18-Teeth)	2
19***68	Washer-Hard; (17.5x32x8-mm Thk)	36

See all parts with full part numbers in Heavy Parts AI →

315-4118 Filler Gp-Power Train Oil

31***18	Filler Group-Power Train Oil	1
31***48	Gauge As-Oil Level (Dipstick); (Power Train Oil)	1
5D***53	Capscrew (3/8 - 16 Nc X 1 Gd8, Hex Self-Locking)	2
7J***11	Elbow-Pipe; (1/4-18 Nptf Thd)	1

See all parts with full part numbers in Heavy Parts AI →

333-6436 Filter Gp-Oil

13***29	Seal-O-Ring	1
21***68	Seal-O-Ring; (11.89-mm Id)	1
24***12	Plug As	1
32***67	Housing Group-Filter	1

See all parts with full part numbers in Heavy Parts AI →

115-0632 Gear Gp-Bevel & Pinion

03***35	Bolt-Self Locking; 2.22cm(.875 In.) Lg	2
03***57	Bolt; --To Reverse Shaft Bearing Retainer & Forward Shaft Bearing Retainer	5
0S***56	Bolt 4 1/4 In. (108 mm) --Front Support Assembly To Frame	4
11***78	Cage	1

See all parts with full part numbers in Heavy Parts AI →

348-8156 Lines Gp-Transmission Oil

00***46	Elbow; (45 Degree Pipe)	1
00***98	Connector-Hose (3/4-14nptf Thd)	2
11***48	Baffle	1
11***24	Adapter	1

See all parts with full part numbers in Heavy Parts AI →

315-5378 Lines Gp-Transmission Oil

00***46	Elbow; (45 Degree Pipe)	1
00***98	Connector-Hose (3/4-14nptf Thd)	2
11***48	Baffle	1
11***24	Adapter	1

See all parts with full part numbers in Heavy Parts AI →

142-6203 Mounting Gp-Wheel

0S***73	Bolt 50.80 mm(2 In.) Long	60
14***03	Mounting Group-Wheel	1
4M***53	Washer-Hard; (24x38x3.5-mm Thk)	60

See all parts with full part numbers in Heavy Parts AI →

299-8294 Protection Gp-Xmsn Oil Filler

24***41	Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch)	1
29***94	Protection Group-Xmsn Oil Filler	1
29***95	Hasp	1
29***96	Hasp	1

See all parts with full part numbers in Heavy Parts AI →

6y-8764 Pump Gp-Gear

1M***80	Bearing; (25.413 mm Od)	4
2B***73	Key-Woodruff	1
2D***09	Seal--To Cover & Plate Bearing Retainers	3
3S***04	Washer; (0.406x0.728x0.09-In Thk)	6

See all parts with full part numbers in Heavy Parts AI →

6y-8765 Pump Gp-Gear

4F***52	Packing,Preformed Cover Part Of Kit P/N 4j***80	1
6V***20	Bolt; (M10x1.5x30-mm)	3
6Y***64	Pump Group-Gear; -Transmission	1
6Y***65	Pump Group-Gear; -Transmission	1

See all parts with full part numbers in Heavy Parts AI →

9w-5134 Screen Gp-Magnetic -Transmission

5F***00	Seal-O-Ring	1
5P***63	Seal-O-Ring	1
6V***19	Bolt; (M8x1.25x40-mm)	3
6Y***60	Housing-Filter	1

See all parts with full part numbers in Heavy Parts AI →

8w-5394 Shaft Gp-Drive -Transmission

0S***04	Bolt (1/2-20x2.5in); (1/2-20x2.5-In)	4
3K***96	Guard-Dirt	1
3K***86	Plug	1
5P***13	Washer-Between Welded Nut & Top Swivel	4

See all parts with full part numbers in Heavy Parts AI →

6y-2300 Shaft Gp-Input

0L***26	Plug -13mm(.512 In.) Outside Dia.	1
1M***95	Race & Roller Assem. (Inner)	1
2H***90	Race And Roller Assembly, Including:-	1
3T***77	Seal-Ring (2.362mm Thk)	2

See all parts with full part numbers in Heavy Parts AI →

190-1688 Tandem & Cover Gp

00***53	Elbow-Pipe; (1/2-14 Nptf Thd)	1
19***88	Tandem & Cover Group	1
19***90	Housing As-Tandem Drive; (Rh)	1
19***91	Housing As-Tandem Drive; (Lh)	1

See all parts with full part numbers in Heavy Parts AI →

275-6535 Transmission Ar

23***12	Clutch Group-Transmission; -Forward	1
23***13	Clutch Group-Transmission; -Reverse, Second	1
27***35	Transmission Ar	1
27***33	Case & Parts Group-Planetary	1

See all parts with full part numbers in Heavy Parts AI →

8x-5005 Universal Joint Gp

0S***79	Bolt 5.08 cm(2 In.) Long	8
3D***89	Yoke-Coupling	1
8X***05	Universal Joint Group; -Main Drive Shaft	1
9P***56	Spider & Bearing As	2

See all parts with full part numbers in Heavy Parts AI →

174-3705 Valve & Mtg Gp-Diff Lock

14***16	Manifold	1
15***64	Valve Group-Solenoid	1
17***05	Valve & Mtg Group-Diff Lock	1
6G***79	Kit-Cartridge Seal; (Includes 3 O-Rings)	1

See all parts with full part numbers in Heavy Parts AI →

281-3160 Valve Gp-Selector & Press Cont

09***07	Nut; (M12x1.75-Thd)	1
10***54	Screw-Adjustment; (M12x1.75x18-mm)	1
10***29	Stop	1
10***23	Adjuster Assem.	5

See all parts with full part numbers in Heavy Parts AI →

184-1130 Valve Gp-Selector & Press Cont

09***07	Nut; (M12x1.75-Thd)	1
10***54	Screw-Adjustment; (M12x1.75x18-mm)	1
10***23	Adjuster Assem.	1
15***09	Body	1

See all parts with full part numbers in Heavy Parts AI →

154-3064 Valve Gp-Solenoid

10***02	Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness)	1
11***43	Locknut; (5/16-18-Thd)	2
14***50	Cartridge As	1
15***64	Valve Group-Solenoid	1

See all parts with full part numbers in Heavy Parts AI →

186-1526 Valve Gp-Solenoid

10***02	Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness)	1
10***47	Locknut; (5/8-11-Thd)	1
18***26	Valve Group-Solenoid; (24-Volt)(Transmission Clutch)	1
18***35	Pin-Connector; (16-Ga To 18-Ga)	2

See all parts with full part numbers in Heavy Parts AI →

281-3163 Valve Gp-Transmission Control

11***61	Manifold	1
14***67	Poppet	1
14***07	Plug; (Hex Head) (-6 Orb) (Current) (16*35 Friction Disc Interchangeable With 11*47) (Use All Of One Part Number)	2
15***06	Plate	1

See all parts with full part numbers in Heavy Parts AI →

252-7948 Wheel & Tire Ar

25***47	Wheel & Tire Group	6
25***48	Wheel & Tire Ar	1

See all parts with full part numbers in Heavy Parts AI →

142-6479 Wheel & Tire Ar

14***30	Wheel & Tire Group	6
14***79	Wheel & Tire Ar	1

See all parts with full part numbers in Heavy Parts AI →

151-0364 Wheel & Tire Ar

14***53	Wheel & Tire Group	6
15***64	Wheel & Tire Ar	1

See all parts with full part numbers in Heavy Parts AI →

151-0379 Wheel & Tire Ar

14***61	Wheel & Tire Group	6
15***79	Wheel & Tire Ar	1

See all parts with full part numbers in Heavy Parts AI →

151-0388 Wheel & Tire Ar

14***57	Wheel & Tire Group	6
15***88	Wheel & Tire Ar	1

See all parts with full part numbers in Heavy Parts AI →

252-0727 Wheel & Tire Ar

25***26	Wheel & Tire Group	6
25***27	Wheel & Tire Ar	1

See all parts with full part numbers in Heavy Parts AI →

305-6159 Wheel & Tire Ar

30***55	Bolt, Stud, Stud, Wheel & Tire Group	6
30***59	Hose, Flexible, Wheel & Tire Ar	1

See all parts with full part numbers in Heavy Parts AI →

151-0372 Wheel & Tire Ar

14***72	Wheel & Tire Group	6
15***72	Wheel & Tire Ar	1

See all parts with full part numbers in Heavy Parts AI →

151-0368 Wheel & Tire Ar

14***71	Wheel & Tire Group	6
15***68	Wheel & Tire Ar	1

See all parts with full part numbers in Heavy Parts AI →

142-6463 Wheel & Tire Ar

14***15	Wheel & Tire Group	6
14***63	Wheel & Tire Ar	1

See all parts with full part numbers in Heavy Parts AI →

151-0371 Wheel & Tire Ar

14***54	Wheel & Tire Group	6
15***71	Wheel & Tire Ar	1

See all parts with full part numbers in Heavy Parts AI →

142-6455 Wheel & Tire Ar

14***07	Wheel & Tire Group	6
14***55	Wheel & Tire Ar	1

See all parts with full part numbers in Heavy Parts AI →

142-6449 Wheel & Tire Ar

14***01	Wheel & Tire Group	6
14***49	Wheel & Tire Ar	1

See all parts with full part numbers in Heavy Parts AI →

254-7963 Wheel & Tire Ar

25***47	Wheel & Tire Group	6
25***63	Wheel & Tire Ar	1

See all parts with full part numbers in Heavy Parts AI →

252-0679 Wheel & Tire Ar

25***78	Wheel & Tire Group	6
25***79	Wheel & Tire Ar	1

See all parts with full part numbers in Heavy Parts AI →

252-0753 Wheel & Tire Ar

25***52	Wheel & Tire Group	6
25***53	Wheel & Tire Ar	1

See all parts with full part numbers in Heavy Parts AI →

151-0365 Wheel & Tire Ar

14***60	Wheel & Tire Group	6
15***65	Wheel & Tire Ar	1

See all parts with full part numbers in Heavy Parts AI →

151-0366 Wheel & Tire Ar

14***63	Wheel & Tire Group	6
15***66	Wheel & Tire Ar	1

See all parts with full part numbers in Heavy Parts AI →

142-6458 Wheel & Tire Ar

14***10	Wheel & Tire Group	6
14***58	Wheel & Tire Ar	1

See all parts with full part numbers in Heavy Parts AI →

142-6457 Wheel & Tire Ar

14***09	Wheel & Tire Group	6
14***57	Wheel & Tire Ar	1

See all parts with full part numbers in Heavy Parts AI →

151-0389 Wheel & Tire Ar

14***75	Wheel & Tire Group	6
15***89	Wheel & Tire Ar	1

See all parts with full part numbers in Heavy Parts AI →

142-6454 Wheel & Tire Ar

14***06	Wheel & Tire Group	6
14***54	Wheel & Tire Ar	1

See all parts with full part numbers in Heavy Parts AI →

142-6464 Wheel & Tire Ar

14***16	Wheel & Tire Group	6
14***64	Wheel & Tire Ar	1

See all parts with full part numbers in Heavy Parts AI →

174-2304 Wheel & Tire Ar

17***13	Wheel & Tire Group	6
17***04	Wheel & Tire Ar	1

See all parts with full part numbers in Heavy Parts AI →

151-0382 Wheel & Tire Ar

14***74	Wheel & Tire Group	6
15***82	Wheel & Tire Ar	1

See all parts with full part numbers in Heavy Parts AI →

254-7964 Wheel & Tire Ar

25***48	Wheel & Tire Group	6
25***64	Wheel & Tire Ar	1

See all parts with full part numbers in Heavy Parts AI →

252-0731 Wheel & Tire Ar

25***30	Wheel & Tire Group	6
25***31	Wheel & Tire Ar	1

See all parts with full part numbers in Heavy Parts AI →

142-6448 Wheel & Tire Ar

14***00	Wheel & Tire Group	6
14***48	Wheel & Tire Ar	1

See all parts with full part numbers in Heavy Parts AI →

151-0378 Wheel & Tire Ar

14***56	Wheel & Tire Group	6
15***78	Wheel & Tire Ar	1

See all parts with full part numbers in Heavy Parts AI →

151-0380 Wheel & Tire Ar

14***64	Wheel & Tire Group	6
15***80	Wheel & Tire Ar	1

See all parts with full part numbers in Heavy Parts AI →

252-0708 Wheel & Tire Ar

25***07	Wheel & Tire Group	6
25***08	Wheel & Tire Ar	1

See all parts with full part numbers in Heavy Parts AI →

252-0707 Wheel & Tire Gp

14***07	Tire; (14-R24)(14.0 R24 * Vsw Bs)	1
25***08	Wheel Group	1
25***07	Wheel & Tire Group	1

See all parts with full part numbers in Heavy Parts AI →

142-6361 Wheel & Tire Gp

14***29	Wheel Group	1
14***61	Wheel & Tire Group	1
2D***07	Stud	1
2D***08	Grommmet	1

See all parts with full part numbers in Heavy Parts AI →

142-6297 Wheel & Tire Gp

12***20	Rim As	1
14***70	Tire; (14.00-24 10pr G-2 Gy)	1
14***97	Wheel & Tire Group	1
2D***07	Stud	1

See all parts with full part numbers in Heavy Parts AI →

252-0730 Wheel & Tire Gp

14***83	Tire; (17.5-25)	1
25***12	Wheel Group	1
25***30	Wheel & Tire Group	1

See all parts with full part numbers in Heavy Parts AI →

142-6360 Wheel & Tire Gp

14***60	Wheel & Tire Group	1
2D***07	Stud	1
2D***08	Grommmet	1
2D***09	Locknut; (11/16-16-Thd)	1

See all parts with full part numbers in Heavy Parts AI →

142-6300 Wheel & Tire Gp

12***20	Rim As	1
14***71	Tire; (14.00-24 10pr G-2 Fs)	1
14***00	Wheel & Tire Group	1
2D***07	Stud	1

See all parts with full part numbers in Heavy Parts AI →

142-6315 Wheel & Tire Gp

11***13	Tire; (14-R24)(14.0 R24 Tg * Xgla2 G-2)	1
12***20	Rim As	1
14***15	Wheel & Tire Group	1
2D***07	Stud	1

See all parts with full part numbers in Heavy Parts AI →

142-6309 Wheel & Tire Gp

12***20	Rim As	1
14***74	Tire; (14.00-24 12pr G-2 Fs)	1
14***09	Wheel & Tire Group	1
2D***07	Stud	1

See all parts with full part numbers in Heavy Parts AI →

252-0678 Wheel & Tire Gp

11***13	Tire; (14-R24)(14.0 R24 Tg * Xgla2 G-2)	1
25***08	Wheel Group	1
25***78	Wheel & Tire Group	1

See all parts with full part numbers in Heavy Parts AI →

142-6330 Wheel & Tire Gp

11***13	Valve Group-Tire; (Tire Inflation)	1
11***14	Stem As	1
14***07	Tire; (14-R24)(14.0 R24 * Vsw Bs)	1
14***26	Wheel Group	1

See all parts with full part numbers in Heavy Parts AI →

142-6374 Wheel & Tire Gp

12***51	Tire; (17.5-25)	1
14***29	Wheel Group	1
14***74	Wheel & Tire Group	1
2D***07	Stud	1

See all parts with full part numbers in Heavy Parts AI →

142-6371 Wheel & Tire Gp

12***51	Tire; (17.5-25)	1
14***71	Wheel & Tire Group	1
2D***07	Stud	1
2D***08	Grommmet	1

See all parts with full part numbers in Heavy Parts AI →

142-6310 Wheel & Tire Gp

11***13	Valve Group-Tire; (Tire Inflation)	1
11***14	Stem As	1
14***74	Tire; (14.00-24 12pr G-2 Fs)	1
14***26	Wheel Group	1

See all parts with full part numbers in Heavy Parts AI →

142-6353 Wheel & Tire Gp

12***50	Tire-Tubeless; (17.5-25)	1
14***53	Wheel & Tire Group	1
2D***07	Stud	1
2D***08	Grommmet	1

See all parts with full part numbers in Heavy Parts AI →

254-7948 Wheel & Tire Gp

14***83	Tire; (17.5-25)	1
25***11	Wheel Group	1
25***48	Wheel & Tire Group	1

See all parts with full part numbers in Heavy Parts AI →

142-6307 Wheel & Tire Gp

11***13	Valve Group-Tire; (Tire Inflation)	1
11***14	Stem As	1
14***73	Tire; (14.00-24 12pr G-2 Gy)	1
14***26	Wheel Group	1

See all parts with full part numbers in Heavy Parts AI →

142-6375 Wheel & Tire Gp

14***86	Tire; (17.5-25)	1
14***29	Wheel Group	1
14***75	Wheel & Tire Group	1
2D***07	Stud	1

See all parts with full part numbers in Heavy Parts AI →

142-6357 Wheel & Tire Gp

14***83	Tire; (17.5-25)	1
14***29	Wheel Group	1
14***57	Wheel & Tire Group	1
2D***07	Stud	1

See all parts with full part numbers in Heavy Parts AI →

142-6356 Wheel & Tire Gp

12***50	Tire-Tubeless; (17.5-25)	1
14***29	Wheel Group	1
14***56	Wheel & Tire Group	1
2D***07	Stud	1

See all parts with full part numbers in Heavy Parts AI →

305-6155 Wheel & Tire Gp

15***55	Tire; (14-24)	1
25***08	Wheel Group	1
30***55	Bolt, Stud, Stud, Wheel & Tire Group	1

See all parts with full part numbers in Heavy Parts AI →

142-6316 Wheel & Tire Gp

11***13	Valve Group-Tire; (Tire Inflation)	1
11***14	Stem As	1
11***13	Tire; (14-R24)(14.0 R24 Tg * Xgla2 G-2)	1
14***26	Wheel Group	1

See all parts with full part numbers in Heavy Parts AI →

252-0726 Wheel & Tire Gp

12***50	Tire-Tubeless; (17.5-25)	1
25***12	Wheel Group	1
25***26	Wheel & Tire Group	1

See all parts with full part numbers in Heavy Parts AI →

142-6372 Wheel & Tire Gp

14***86	Tire; (17.5-25)	1
14***72	Wheel & Tire Group	1
2D***07	Stud	1
2D***08	Grommmet	1

See all parts with full part numbers in Heavy Parts AI →

252-0752 Wheel & Tire Gp

14***86	Tire; (17.5-25)	1
25***12	Wheel Group	1
25***52	Wheel & Tire Group	1

See all parts with full part numbers in Heavy Parts AI →

142-6306 Wheel & Tire Gp

12***20	Rim As	1
14***73	Tire; (14.00-24 12pr G-2 Gy)	1
14***06	Wheel & Tire Group	1
2D***07	Stud	1

See all parts with full part numbers in Heavy Parts AI →

254-7947 Wheel & Tire Gp

14***82	Tire; (17.5-25)	1
25***11	Wheel Group	1
25***47	Wheel & Tire Group	1

See all parts with full part numbers in Heavy Parts AI →

252-7947 Wheel & Tire Gp

14***74	Tire; (14.00-24 12pr G-2 Fs)	1
25***06	Wheel Group	1
25***47	Wheel & Tire Group	1

See all parts with full part numbers in Heavy Parts AI →

142-6301 Wheel & Tire Gp

11***13	Valve Group-Tire; (Tire Inflation)	1
11***14	Stem As	1
14***71	Tire; (14.00-24 10pr G-2 Fs)	1
14***26	Wheel Group	1

See all parts with full part numbers in Heavy Parts AI →

173-7813 Wheel & Tire Gp

11***13	Valve Group-Tire; (Tire Inflation)	1
11***14	Stem As	1
14***26	Wheel Group	1
17***13	Wheel & Tire Group	1

See all parts with full part numbers in Heavy Parts AI →

142-6363 Wheel & Tire Gp

14***63	Wheel & Tire Group	1
2D***07	Stud	1
2D***08	Grommmet	1
2D***09	Locknut; (11/16-16-Thd)	1

See all parts with full part numbers in Heavy Parts AI →

142-6354 Wheel & Tire Gp

14***83	Tire; (17.5-25)	1
14***54	Wheel & Tire Group	1
2D***07	Stud	1
2D***08	Grommmet	1

See all parts with full part numbers in Heavy Parts AI →

142-6364 Wheel & Tire Gp

14***29	Wheel Group	1
14***64	Wheel & Tire Group	1
2D***07	Stud	1
2D***08	Grommmet	1

See all parts with full part numbers in Heavy Parts AI →

252-0114 Wheel Ar

25***06	Wheel Group	6
25***14	Wheel Ar	1

See all parts with full part numbers in Heavy Parts AI →

148-2405 Wheel Ar

14***04	Wheel Group	6
14***05	Wheel Ar, Locking Plate	1

See all parts with full part numbers in Heavy Parts AI →

142-6305 Wheel Ar

14***04	Wheel Group	6
14***05	Wheel Ar	1

See all parts with full part numbers in Heavy Parts AI →

252-0118 Wheel Ar

25***12	Wheel Group	6
25***18	Wheel Ar	1

See all parts with full part numbers in Heavy Parts AI →

142-6303 Wheel Ar

14***72	Wheel Group	6
14***03	Wheel Ar	1

See all parts with full part numbers in Heavy Parts AI →

142-6304 Wheel Gp

11***13	Valve Group-Tire; (Tire Inflation)	1
11***14	Stem As	1
14***26	Wheel Group	1
14***04	Wheel Group	1

See all parts with full part numbers in Heavy Parts AI →

252-0102 Wheel Gp

25***02	Wheel Group	1
29***05	Rim As	1
2D***54	Ring-Lock	1
8W***66	Flange As	1

See all parts with full part numbers in Heavy Parts AI →

142-6229 Wheel Gp

14***29	Wheel Group	1
28***25	Rim As; (14x25)	1
4K***81	Ring-Lock; (Lock)	1
8W***94	Flange Assem.	1

See all parts with full part numbers in Heavy Parts AI →

142-6226 Wheel Gp

14***26	Wheel Group	1
29***07	Rim As; (10x24)	1
2D***54	Ring-Lock	1
8W***66	Flange As	1

See all parts with full part numbers in Heavy Parts AI →

252-0111 Wheel Gp

25***00	Rim As	1
25***11	Wheel Group	1
2D***07	Stud	1
2D***08	Grommmet	1

See all parts with full part numbers in Heavy Parts AI →

148-2404 Wheel Gp

14***04	Wheel Group	1
2D***07	Stud	1
2D***08	Grommmet	1
2D***09	Locknut; (11/16-16-Thd)	1

See all parts with full part numbers in Heavy Parts AI →

142-6172 Wheel Gp

12***20	Rim As	1
14***72	Wheel Group	1
2D***07	Stud	1
2D***08	Grommmet	1

See all parts with full part numbers in Heavy Parts AI →

252-0108 Wheel Gp

11***13	Valve Group-Tire; (Tire Inflation)	1
11***14	Stem As	1
25***02	Wheel Group	1
25***08	Wheel Group	1

See all parts with full part numbers in Heavy Parts AI →

252-0112 Wheel Gp

25***04	Wheel Group; -All Wheel Drive	1
25***12	Wheel Group	1
2D***07	Stud	1
2D***08	Grommmet	1

See all parts with full part numbers in Heavy Parts AI →

252-0104 Wheel Gp -All Wheel Drive

25***04	Wheel Group; -All Wheel Drive	1
28***26	Rim As	1
4K***81	Ring-Lock; (Lock)	1
8W***94	Flange Assem.	1

See all parts with full part numbers in Heavy Parts AI →

252-0106 Wheel Gp

25***98	Rim As; (9x24)	1
25***06	Wheel Group	1
2D***07	Stud	1
2D***08	Grommmet	1

See all parts with full part numbers in Heavy Parts AI →

Service Equipment And Supplies

111-1719 Box Gp-Tool

11***19	Box Group-Tool	1
11***59	Retainer Assembly; (G.E.T.)	1
13***08	Pin	1
2K***13	Pin	1

See all parts with full part numbers in Heavy Parts AI →

300-5242 Film Gp

19***18	Shank	9
30***42	Film Group	1
5K***58	Grommet	9
5K***59	Pin-Locking	9

See all parts with full part numbers in Heavy Parts AI →

8f-9866 Grease Gun Gp

12***49	Tool Box	1
24***41	Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch)	1
5K***07	Bolt 5t***11 Bracket To Lh Radiator Guard	4
5P***75	Washer-Hard; (10.2x22.5x3-mm Thk)(Shield To A/C)	4

See all parts with full part numbers in Heavy Parts AI →

285-4189 Plate & Film Gp

25***61	Film-Information; (Cat Power, Acert Technology)	2
28***80	Film-Identification; (Caterpillar)	1
28***89	Plate & Film Group	1
29***64	Film-Identification; (Cat, Rh)(Engine Enclosure)	1

See all parts with full part numbers in Heavy Parts AI →

211-0617 Tool Gp-Hand

19***68	Coupler-Grease	1
19***69	Hose As	1
21***17	Tool Group-Hand	1
9F***37	Fitting; (Grease Gun)	1

See all parts with full part numbers in Heavy Parts AI →

Tools

18***30	Strap Wrench Assem.	1
1P***45	Gauge Group-Pressure	1
1P***51	Pin-Spring	1
21***44	Socket-Special	1

See all parts with full part numbers in Heavy Parts AI →

Work Tools

130-5667 Bar Gp-Link

01***16	Setscrew; (8-32x0.5-In)	1
10***05	Kit-Receptacle; (6-Pin)(Display Monitor Harness)	1
11***85	Knob-Wiper Switch; (Rear)	1
13***67	Bar Group-Link	1

See all parts with full part numbers in Heavy Parts AI →

107-3395 Bit Gp-End

10***95	Bit Group-End	1
27***64	Switch Group-Wiper; -Intermittent	2

See all parts with full part numbers in Heavy Parts AI →

107-3398 Bit Gp-End

10***98	Bit Group-End	1
12***26	Control Ar-Governor	5
8X***08	Bearing-Sleeve	2
8X***09	Bar As	1

See all parts with full part numbers in Heavy Parts AI →

329-3827 Blade & Tip Ar-Power

1J***62	Bolt-Plow	10
32***27	Blade & Tip Ar-Power	1
5F***33	Bolt-Plow; (3/4-10x3.75-In)	6
6Y***05	Bit-End (Overlay)	2

See all parts with full part numbers in Heavy Parts AI →

329-3825 Blade & Tip Ar-Power

32***25	Blade & Tip Ar-Power	1
4F***57	Bolt-Plow; (5/8-11x2.75-In)	6
4F***58	Bolt 76.2 mm (3.00") Long	4
9W***68	Bit-End	2

See all parts with full part numbers in Heavy Parts AI →

329-3828 Blade Ar

10***87	Lines Group-Hydraulic; -Lh	1
11***63	Cylinder & Mtg Group-Sideshift	1
11***86	Circle Group	1
32***24	Blade Group	1

See all parts with full part numbers in Heavy Parts AI →

329-3829 Blade Ar

10***87	Lines Group-Hydraulic; -Lh	1
11***63	Cylinder & Mtg Group-Sideshift	1
11***86	Circle Group	1
32***31	Blade Group	1

See all parts with full part numbers in Heavy Parts AI →

320-7431 Blade Gp

11***63	Cylinder & Mtg Group-Sideshift	1
11***55	Lines Group-Hydraulic; -Lh	1
32***31	Blade Group	1
32***24	Blade Group	1

See all parts with full part numbers in Heavy Parts AI →

324-0151 Blade Gp

11***13	Rail-Moldboard	1
2J***06	Nut Front Support To Frame; Nut-Front Support To Frame	36
32***49	Moldboard As	1
32***51	Blade Group	1

See all parts with full part numbers in Heavy Parts AI →

324-0150 Blade Gp

11***14	Rail-Moldboard	2
1J***62	Bolt-Plow	4
2J***06	Nut Front Support To Frame; Nut-Front Support To Frame	40
32***46	Moldboard As	1

See all parts with full part numbers in Heavy Parts AI →

320-9924 Blade Gp

11***63	Cylinder & Mtg Group-Sideshift	1
11***55	Lines Group-Hydraulic; -Lh	1
32***31	Blade Group	1
32***24	Blade Group	1

See all parts with full part numbers in Heavy Parts AI →

347-8846 Blade Gp-Bulldozer -Front

11***13	Rail-Moldboard	1
2J***06	Nut Front Support To Frame; Nut-Front Support To Frame	36
32***48	Moldboard As	1
34***46	Blade Group-Bulldozer; -Front	1

See all parts with full part numbers in Heavy Parts AI →

143-7280 Blade Gp-Bulldozer

11***14	Rail-Moldboard	1
14***80	Blade Group-Bulldozer	1
2J***06	Nut Front Support To Frame; Nut-Front Support To Frame	40
32***47	Moldboard As	1

See all parts with full part numbers in Heavy Parts AI →

9d-6425 Bracket Gp-Blade

13***11	Pin Assem.	2
16***88	Link As	1
16***89	Edge-Cutting; (Center)	1
16***90	Plate As	1

See all parts with full part numbers in Heavy Parts AI →

339-7733 Bracket Gp-Scarifier

2G***19	Shim .80mm(.031in)Thk; 1.524mm(.030in)Thk	4
2G***21	Shim 1.6mm(.062in)Thk; 1.53mm(.060in.)Thk	4
2K***19	Washer 1.59mm (.065 In.) Thick; (0.766x3.5x0.065-In Thk)	4
33***33	Bracket Group-Scarifier	1

See all parts with full part numbers in Heavy Parts AI →

116-0379 Bracket Gp-Scarifier

11***79	Bracket Group-Scarifier	1
13***11	Pin Assem.	2
16***88	Link As	1
16***89	Edge-Cutting; (Center)	1

See all parts with full part numbers in Heavy Parts AI →

314-9338 Cylinder Gp-Hydraulic

31***38	Cylinder Group-Hydraulic; -Steering	1
8W***81	Plate	1
8W***84	Bracket As	1

See all parts with full part numbers in Heavy Parts AI →

282-0508 Edge Gp-Cutting

28***08	Edge Group-Cutting	1
5D***59	Cutting Edge-- 2.1336 M (7 Foot)	2

See all parts with full part numbers in Heavy Parts AI →

282-0506 Edge Gp-Cutting

16***25	Cylinder Assem.	1
16***26	Piston	1
16***27	Rod Assem.	1
17***79	Bolt-Hex Head; (M24x3.0x80mm)	1

See all parts with full part numbers in Heavy Parts AI →

107-3393 Edge Gp-Cutting

10***93	Edge Group-Cutting	1
8W***81	Plate	1
8W***84	Bracket As	1

See all parts with full part numbers in Heavy Parts AI →

250-0615 Extension Gp-Blade -Lh

25***15	Extension Group-Blade; -Lh	1
7D***58	Edge-Cutting; (7-Ft Each)	2

See all parts with full part numbers in Heavy Parts AI →

243-6685 Extension Gp-Blade -Rh

24***85	Extension Group-Blade; -Rh	1
7D***77	Edge-Cutting; (7-Ft Each)	2

See all parts with full part numbers in Heavy Parts AI →

125-0290 Lift Gp-Blade

11***34	Spacer; (3-mm Thk)	2
11***36	Angle As	1
12***90	Lift Group-Blade	1
17***42	Spacer; (2-mm Thk)	1

See all parts with full part numbers in Heavy Parts AI →

289-7597 Mounting Gp-Ripper

11***34	Spacer; (3-mm Thk)	2
11***35	Angle As	1
17***42	Spacer; (2-mm Thk)	1
17***43	Spacer; (1-mm Thk)	2

See all parts with full part numbers in Heavy Parts AI →

180-1679 Mounting Gp-Snow Wing

0S***56	Bolt 4 1/4 In. (108 mm) --Front Support Assembly To Frame	4
12***87	Washer-Thrust; (76.6x146x1-mm Thk)(.100 Thk)	2
12***35	Plate	1
12***36	Bushing	3

See all parts with full part numbers in Heavy Parts AI →

285-4183 Ripper Ar

10***23	Cam As	2
10***76	Pin	2
12***80	Locknut; (M12x1.75-Thd)	2
26***06	Washer-Hard; (26x44x4-mm Thk)	10

See all parts with full part numbers in Heavy Parts AI →

8j-7024 Ripper Gp

12***67	Plate-Mounting	1
12***68	Plate; (Brace)	1
12***69	Plate As	1
8J***24	Ripper Group	1

See all parts with full part numbers in Heavy Parts AI →

108-1104 Scarifier Ar -Vee Type

10***04	Scarifier Ar; -Vee Type	1
11***54	Cylinder Group-Ripper	1
17***39	Lines Group-Ripper; -Rear	1
28***97	Mounting Group-Ripper	1

See all parts with full part numbers in Heavy Parts AI →

340-5009 Scarifier Ar -Vee Type

18***53	Link As-Lower	1
19***86	Film; (Safety) (To Right And Left Of Fuel Tank)	2
1K***72	Locknut Horn To Guard	10
2D***26	Seal	8

See all parts with full part numbers in Heavy Parts AI →

8x-6080 Scarifier Gp -Vee Type

11***79	Bracket Group-Scarifier	1
8W***13	Cylinder & Mounting Group-Scrfr	1
8X***70	Lines Group-Hydraulic; -Scarifier	1
8X***80	Scarifier Group; -Vee Type	2

See all parts with full part numbers in Heavy Parts AI →

310-9428 Scarifier Gp -Vee Type

31***28	Scarifier Group; -Vee Type	2
33***33	Bracket Group-Scarifier	1
8W***13	Cylinder & Mounting Group-Scrfr	1
8X***70	Lines Group-Hydraulic; -Scarifier	1

See all parts with full part numbers in Heavy Parts AI →

4k-3330 Tooth Gp-Scarifier

10***74	Bearing	2
10***75	Shaft As	1
11***80	Drawbar As	1
11***81	Drawbar As	1

See all parts with full part numbers in Heavy Parts AI →

8j-1434 Tooth Gp-Ripper -Straight

10***74	Bearing	2
10***75	Shaft As	1
11***80	Drawbar As	1
11***81	Drawbar As	1

See all parts with full part numbers in Heavy Parts AI →

140K serial number reference

On the 140K/140K2 motor grader, the Product Identification Number (PIN) plate is mounted on the machine's main frame, most commonly reported on the front chassis rail (left- or right-hand side) just ahead of the moldboard/lift-cylinder support area, with the number sometimes also stamped directly into the frame if the plate is missing or damaged; clean off dirt and surface rust if it is hard to read. Machines built from roughly 2001 onward carry a full 17-character PIN under Cat's worldwide numbering format; within that PIN the machine's serial number occupies the trailing 8 characters, and the first 3 characters of that serial number are the alphanumeric prefix identifying the specific model/configuration block (e.g., SZL or JPA for the original 140K, SZW for the 140K2). Confirm exact plate placement and full PIN breakdown for a specific unit with a Cat dealer, since placement conventions can vary slightly by build era.

Prefix	Identifies	Notes
SZL	140K motor grader (first-generation K series)	Cat 140K Motor Grader (SZL00001-UP), C7 engine. Production: circa 2010-2012 (end range undocumented).
JPA	140K motor grader (first-generation K series)	Cat 140K Motor Grader (JPA00001-UP), C7 engine. 2018-built examples: serials JPA04613, JPA04649. JPA prefix (distinct from JAP, which belongs to 120K).
SZW	140K2 / "K Series 2" motor grader (facelift/second-generation K series)	Cat 140K2 Motor Grader (SZW00001-UP), C7 engine. SZW prefix (distinct from SZS, which belongs to 120K Series 2). Updated 140K2 model, separate from original 140K (SZL/JPA).

Frequently asked questions

What engine does the Caterpillar 140K motor grader use?

The 140K uses a Cat C7 ACERT six-cylinder diesel, part of the K Series lineup shared with the 12K, 120K, and 160K graders. Output is generally cited in the 128-155 kW (roughly 171-208 hp) range through Caterpillar's variable horsepower (VHP) system, with the exact rating varying by emissions calibration (Tier 2/Stage II or Tier 3/Stage IIIA equivalent) and gear selection.

What is the operating weight of the Caterpillar 140K?

Operating weight is typically reported between about 17.3 and 22.9 tonnes (roughly 38,100-50,420 lb), varying by configuration - tire choice, all-wheel-drive versus standard rear-tandem drive, counterweighting, and attachments all shift the figure, so treat it as a range rather than a single spec.

What replaced the Caterpillar 140K motor grader?

The 140K was itself the replacement for the 140H, and Caterpillar later issued the 140K2 - the same platform with an updated Tier 2 emissions calibration - as its direct successor. In parallel, Caterpillar's broader 140-family lineup for stricter-emissions markets moved on to the 140M, 140M2, and 140M3 generations, and more recently the 140 GC, though those developed alongside rather than strictly replacing the K Series in its target markets.

What 140K owners discuss

What engine is actually in the Cat 140K, and are there generation-specific quirks to watch for?

Cat literature and dealer spec sheets confirm the entire K-series line (120K/12K/140K/160K) uses the Cat C7 ACERT, a 7.2 L (439 in³) inline-6, typically listed at 128-143 kW (171-191 hp) net depending on rating, meeting Tier 3/Stage IIIA (or Tier 2/Stage II equivalent in the 140K2 variant sold in emissions-tier-2 markets like India, which sources describe as the same engine simply detuned for that market - not a different block). Community discussion of C7 ACERT engines generally centers on the HEUI fuel system: hard-starting or no-start complaints are frequently traced to low fuel transfer pressure or injection actuation pressure (IAP) not reaching the commanded value, since HEUI injectors rely on engine oil pressure to fire, and to turbo-inlet/EGR passage fouling over time on ACERT-era engines. Caveat: most of the detailed injector/EGR/DPF complaints found in searches come from on-highway C7 ACERT truck installations; the industrial Tier 3 grader rating does not carry a diesel particulate filter, so treat soot-related emissions complaints as a general ACERT-family watch item rather than a confirmed 140K-specific failure. Have your dealer verify any fuel pressure or IAP fault code before authorizing injector or HEUI pump replacement.

Owners report the 140K sometimes won't move forward but reverse works fine - what's the community troubleshooting path?

A documented 140K case (engine running normally, reverse functional, forward not engaging) led mechanics through a standard sequence: check the transmission linkage and shift lever for damage or misalignment, inspect for worn clutch plates, check for hydraulic pressure loss inside the powershift clutch pack, and confirm the forward/reverse shift solenoid isn't stuck or miswired. Broader forum discussion of Cat's direct-drive powershift architecture (which the K series carries forward from the H series) describes intermittent slip-to-neutral behavior traced to an individual clutch solenoid or the valve spool underneath it, and cautions that swapping only the solenoid coil without checking the spool can mask the real fault and cause a repeat failure. Because unexpected loss of drive (or unexpected re-engagement) on a machine this size is a safety issue, have your dealer verify clutch pack pressures and solenoid/valve-spool condition before returning the grader to service.

What hydraulic issues come up most with the 140K's wheel lean, articulation, and blade circuits?

The 140K uses a load-sensing hydraulic circuit (Cat calls it Proportional Priority Pressure Compensating, or PPPC) for blade, wheel-lean, and articulation functions, with an independent hydraulic oil supply intended to limit cross-contamination and heat buildup compared with sharing oil across systems. Field guidance is consistent across sources: sluggish or spongy blade/wheel-lean/articulation response, or unusual pump noise, most often points to low fluid level, a failing pressure compensator, or contaminated oil - contamination is cited industry-wide as the leading cause behind hydraulic cylinder and pump failures. A repeated inspection tip from grader-buying guides is to check the ground under the machine and around the wheel-lean and articulation cylinder rod seals for staining or dirt buildup rather than relying on a visual check of the cylinder alone, since a slow rod-seal leak often shows there first. Because a failed wheel-lean or articulation cylinder can cause sudden unexpected machine movement, have your dealer verify cylinder seal condition and system pressure before relying on the machine for road work.

What undercarriage and wear-component patterns are typical for the 140K's circle, moldboard, and tandems?

Consensus across Cat's own maintenance guidance and independent grader-inspection write-ups: the one-piece forged circle and its nylon composite wear inserts/shims are the first thing to check for play - if shims have been added to keep the circle tight, cycle it through full range of motion to confirm no play remains, since an out-of-adjustment circle accelerates uneven wear on the circle and pinion teeth. The moldboard itself rides on sacrificial brass slide-rail wear strips designed to be adjusted or replaced so the moldboard and drawbar don't wear directly; a cutting edge worn down to roughly half its original thickness is the commonly cited point to replace it. Tandem cases, wheel motors, and articulation/pivot pins are flagged as the other high-wear items, particularly on machines that worked rough or rocky terrain rather than finish grading, since irregular terrain measurably accelerates undercarriage wear. Standard tire fitment on the 140K is 17.5-25.

What electrical and sensor problems show up on the 140K, and is there a lesson for troubleshooting?

A documented 140K case showed multiple simultaneous-looking fault codes (low system air pressure, user-defined shutdown, and engine overspeed) that all traced back to one root cause: the alternator was charging far above normal, around 34V instead of the typical 13.5-14.5V range, which cascaded into unrelated-looking faults across the machine's electrical system rather than pointing cleanly at one component. The practical lesson the community draws from this is that when a 140K throws several seemingly unrelated fault codes at once, checking charging-system output voltage early can save a lot of diagnostic time chasing individual codes. Sustained overvoltage risks damaging the ECM and other control modules and creates a battery-venting/fire risk, so have your dealer verify charging system output and replace the alternator and/or regulator rather than attempting a field workaround.

How does the 140K differ from the 140H and 140M, and does that matter for parts/support?

Community sources describe the 140K as a relatively short-lived, transitional generation - introduced to replace the 140H, then itself superseded fairly quickly by the M series - and note it was primarily marketed outside North America. Within the K line, the 140K2 (sold in markets like India) is described as mechanically the same C7 ACERT platform simply calibrated to a lower emissions tier (Tier 2/Stage II equivalent) for that market, not a different engine. Practical implication raised by owners: because the K series had a shorter production run and narrower geographic footprint than the H or M, used-market volume, parts availability, and dealer technician familiarity can vary more by region than they do for the more common H or M series machines - worth confirming with a local dealer before buying if you're outside the markets where the K was primarily sold.

What should a buyer physically check before purchasing a used 140K?

Cross-referencing multiple grader-buying and inspection guides (Cat and independent), the recurring checklist is: (1) cycle the circle through full range of motion and check for play, since a shimmed but still-loose circle causes uneven pinion/circle-teeth wear; (2) measure remaining moldboard cutting-edge thickness and check that the blade is straight rather than cupped in the center; (3) look under and around the machine, engine compartment, and circle-drive housing for hydraulic staining before assuming hoses and cylinders are dry; (4) check the articulation joint and wheel-lean cylinders for play or seal leakage, and confirm the cab sits level with the engine compartment - a height mismatch can indicate a bent or loose articulation point or frame damage from tires being turned and leaned under load; (5) inspect tires, and check tandem cases, wheel motors, and pivot points for wear consistent with the terrain the machine reportedly worked; (6) pull service/hour records and compare against visible wear to sanity-check the hour meter. Given the safety implications of a compromised articulation joint or frame, have your dealer perform a full pre-purchase inspection and verify structural and hydraulic condition before finalizing any purchase.

Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.

Need a specific 140K part?

Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.

Search parts in the app