Caterpillarmotor grader
Caterpillar 140H ES
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 140H ES is an articulated, six-wheel motor grader in Cat's mid-size H-series class, built for road maintenance, fine grading, and light earthmoving. It runs the Cat 3306 DIT, a mechanically-governed, direct-injection turbocharged inline-six of 10.45 L displacement with Engine Power Management, rated near 123 kW (165 hp) in the lower travel gears and up to 138 kW (185 hp) in the top gears at 2000 rpm. Standard operating weight runs about 14.7 tonnes (32,357-32,461 lb); attachment choices such as a rear ripper or push block shift individual units within that band. The 140H line succeeded the long-running 140G (1974-1996) and was later replaced by the 140K, with the 140M and Next Generation 140 continuing the family afterward. The ES designation was built on both US (serial prefix 8KM) and Brazilian (prefix 3AS) production lines, both running the 3306; the related 140H NA variant also carried the 3306, while the plain 140H and 140H VHP nameplates used the electronically-governed 3176/3176C instead. Factory configurations included standard and extended moldboards, front scarifier, rear ripper, snow wing, and plow attachments, plus optional guarding packages for debris-heavy sites.
Across the 140H family, Caterpillar split the model by engine and control package rather than clean model years: mechanically-injected 3306 power on the ES and NA nameplates, electronically-governed 3176/3176C power on the plain 140H and 140H VHP lines, all sharing one articulated frame, tandem-drive undercarriage, and circle-drawbar-moldboard grading system. That shared architecture means chassis, hydraulic, and undercarriage parts interchange broadly across the family even where the engine differs. In the used market the 140H ES holds steady demand as a rugged, low-electronics grader. Its mechanically-governed 3306 throws almost no fault codes and avoids the sensor and ECM failure points common on later engines, which keeps it popular with contractors and municipalities working remote sites or running on inconsistent fuel quality. Parts demand centers on tandem final-drive components, circle and drawbar wear strips, articulation cylinder seals, and powershift transmission electronics, the items that see the heaviest use and highest failure rates on a working grader.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 140H ES specifications
Engine
| Engine model | Cat 3306 DIT, direct-injection turbocharged, 6-cylinder inline diesel |
| Displacement | 10.45 L (637.7 cu in) |
| Net power, gears 4-6 | 123 kW (165 hp) |
| Net power, gears 7-8 (rated/max) | 138 kW (185 hp) at 2000 rpm |
| Engine variant note | Later 140H production outside the ES nameplate used a Cat 3176C ATAAC engine (10.3 L, same 165-185 hp net power band). The 3306 DIT is the engine specific to the ES configuration. |
Weights
| Operating weight, standard configuration | 14.68-14.72 t (32,357-32,461 lb); varies slightly with tire and counterweight configuration |
Dimensions
| Overall length | 8.60 m (28.2 ft) |
| Width over tires | 2.46 m (8.1 ft) |
| Wheelbase | 6.09 m (20.0 ft) |
| Height to cab top | 3.12 m (10.2 ft) |
| Moldboard (blade) width | 3.69 m (12.1 ft) |
| Moldboard height | 612 mm (24.1 in) |
| Moldboard thickness | 23 mm (0.9 in) |
| Blade base | 2.57 m (8.4 ft) |
| Tandem axle wheelbase | 1.52 m (5.0 ft); shared tandem undercarriage across the 140H family |
| Ground clearance, front | 0.61 m (2.0 ft); published for the 140H chassis family, verify for your specific ES configuration |
| Ground clearance, rear | 0.37 m (1.2 ft); published for the 140H chassis family, verify for your specific ES configuration |
| Standard tire size | 14-24, 10PR (G-2 tread) |
Performance
| Maximum travel speed, forward | 41.2 km/h (25.6 mph) |
| Maximum travel speed, reverse | 32.5 km/h (20.2 mph) |
| Transmission | Direct-drive powershift, electronically controlled; 8 forward / 6 reverse speeds |
| Outside turning radius | 7.4 m (24.3 ft), front-wheel and articulated-frame steering |
| Articulation angle | 20 degrees |
| Maximum blade lift above ground | 480 mm (18.9 in) |
| Hydraulic pump flow | 206 L/min (54.5 gal/min), axial-piston pump |
| Hydraulic relief valve pressure | 24,130 kPa (3,500 psi) |
Service capacities (summary)
| Engine oil (crankcase, with filter) | 27 L (7.0 US gal); Cat DEO, per the factory service capacity table |
| Cooling system | 40 L (10.4 US gal); Cat ELC, per the factory service capacity table |
| Fuel tank | 341 L (90 US gal) standard; 454 L (120 US gal) optional |
| Hydraulic system | 80 L (20.8 US gal) total, including a 38 L (9.9 US gal) tank |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
140H ES fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | 27 L (7.0 US gal) | Cat 3306 DIT turbocharged diesel engine (with Engine Power Management) is the powerplant fitted to this ES-spec grader. Runs Cat DEO (Diesel Engine Oil). Viscosity by ambient temperature: SAE 10W-30 for wide-range service in cooler climates, SAE 15W-40 for normal service, SAE 30 in consistently hot climates. |
| Cooling system | 40 L (10.4 US gal) | Cat ELC (Extended Life Coolant), premixed 50/50 concentrate with water. A single addition of ELC Extender at the half-life point keeps the coolant in service for a 6000-hour drain interval. |
| Fuel tank | 341 L (90 US gal) standard; a 454 L (120 US gal) tank was offered as a factory option | Diesel fuel meeting Cat's engine fuel specification for this engine family. |
| Transmission, differential and final-drive sump (combined power train compartment, incl. lockable differential) | 47 L (12.2 US gal) | Cat TDTO (Transmission/Drivetrain/Differential Oil), Cat TO-4 spec. Graded by ambient temperature: single-grade SAE 10W in cold climates up through SAE 30 or 50 in hot climates, or an equivalent TDTO multigrade. |
| Tandem final-drive housing (each side) | 65 L (16.9 US gal) per side | Cat TDTO (TO-4), same fluid as the transmission/differential sump. This oil also lubricates and cools the oil-disc service brakes housed in each tandem. |
| Circle drive housing | 7 L (1.8 US gal) | Cat TDTO (TO-4) gear oil. |
| Front wheel spindle bearing housing (each side) | 0.5 L (0.13 US gal) per side | Spindle bearings run bathed in oil; Cat TDTO (TO-4) or equivalent axle-grade oil. |
| Hydraulic system (total, lines and cylinders included) | 80 L (20.8 US gal) | Load-sensing, pressure-compensated piston-pump circuit runs on its own independent oil supply, isolated from the power train to control heat and prevent cross-contamination. Cat TDTO (TO-4) or Cat HYDO hydraulic oil, graded by ambient temperature; confirm the exact grade against the OMM for the machine's specific serial prefix. |
| Hydraulic tank (reservoir only, part of the system total above) | 38 L (9.9 US gal) | Same fluid as the hydraulic system above. |
| Grease (drawbar/circle wear shoes, lift-cylinder pins, articulation joint, other pivot points) | Spec only, no fixed refill volume | Cat multipurpose extreme-pressure (moly-fortified) grease. Articulation-joint fittings are remote-mounted for easy access. |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 140H ES maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 3,000 h |
|
| Every 6,000 h |
|
Servicing the 140H ES beyond the schedule
Predictive Maintenance & Fluid Analysis
Because the mechanically-governed 3306 DIT throws almost no engine fault codes, watch trend data instead: pull an S·O·S oil sample at every crankcase change, track turbocharger and boost-line wear against hours (the engine's main age-related failure point), and monitor Cat ELC coolant condition, dosing with ELC Extender at the 3000-hour half-life mark ahead of the 6000-hour drain. Sample hydraulic oil regularly too. The axial-piston pump runs tight tolerances, and rising particulate counts or a new whine on startup often flag pump wear before it fails.
Corrective & Common Repairs
Most repair calls trace to the electronically-controlled powershift, not the engine: lost gears (reverse, or 3/4/8), a transmission that neutralizes itself mid-pass, or a burnt shift solenoid coil that can also take out the control module sharing its driver circuit. Check coil resistance and harness continuity before condemning the transmission. Hydraulic complaints center on a spongy steering wheel or knocking at full lock, usually a worn cushion valve or drifted relief-valve setting rather than pump failure. Circle, drawbar, and moldboard slide wear from inadequate greasing is the other recurring fix.
Overhaul & Rebuild Points
Plan powertrain rebuilds around the tandem final-drive housings first. Each side carries Cat TDTO and also cools the oil-disc service brakes, so brake drag or overheating often points to degraded tandem oil, not the brakes. Circle teeth, pinion, and wear strips wear together; rebuild as a set once slop shows in the finish grade. Articulation cylinders are a recurring reseal job; a scored bore can bring the leak back after the first reseal. Wheel-lean cylinder tapered pins seize with age and need extra shop time to free.
Seasonal & Environment Servicing
The 3306 DIT's mechanical fuel system and lack of regen/DEF aftertreatment make the 140H ES tolerant of dusty, remote, inconsistent-fuel jobsites, common on both its US-built and Brazil-built production runs. Service fuel filters and drain water/sediment more often in dusty or wet-season conditions. In hot climates, step up engine oil viscosity per Cat's DEO chart and check the ELC cooling system for dust loading before summer. In cold regions, match hydraulic and TDTO grades to ambient temperature, and keep articulation and circle grease points serviced to prevent seizure.
140H ES common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 1D-4540 | Bolt,Machine Fuel Filter Mounting | Fuel system service | Check fitment → |
| 1R-0750 | Filter As-Fuel | Fuel system service | Check fitment → |
| 6I-0273 | Filter Element As-Air | Air intake service | Check fitment → |
| 6I-0274 | Filter Element As-Air | Air intake service | Check fitment → |
| 231-4486 | Filter Element As-Cab Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
140H ES fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 585-2 | Transmission speed sensor circuit, signal erratic, intermittent, or incorrect. Sources differ on whether this sensor reads an intermediate shaft or an output shaft, so treat it as one of the paired transmission shaft-speed sensors. | Corroded or loose sensor connector, chafed harness wiring, or a sensor tip fouled with metal debris. | Inspect the connector and harness for damage, check and clean the sensor air gap, then confirm shaft speed on Cat Electronic Technician while cranking or running. |
| 673-2 | Transmission speed sensor circuit, signal erratic, intermittent, or incorrect. Reported alongside 585-2 as the companion shaft-speed sensor. | Same class of fault as 585-2: loose or corroded connector, damaged harness, or a failing sensor. | Inspect wiring and connector, test sensor resistance against spec, and verify the signal on Cat Electronic Technician through the full gear range; the transmission control can default to a reduced-gear failsafe mode until the fault clears. |
| 643-5 | Transmission shift solenoid circuit, current below normal or open circuit. | Open solenoid coil, broken or disconnected solenoid wiring, or a failed connector pin. | Measure solenoid coil resistance with a multimeter, inspect the harness and connector for an open condition, and replace the solenoid if it reads open. |
| 668-2 | Transmission control (gear-selector) lever circuit, signal erratic, intermittent, or incorrect. | Worn or misaligned lever position sensor, damaged shift linkage, or a wiring fault at the control lever. | Cycle the shift lever through every forward and reverse position while watching the gear-lever parameters on Cat Electronic Technician to confirm each position registers, then inspect the lever sensor and its wiring. |
| 267-02 | Engine shutdown switch circuit, both switch inputs read open at the same time or both read closed at the same time when they should disagree. | Wiring fault or moisture intrusion at the remote or ground-level shutdown switch, or a failed switch. | Inspect the shutdown switch and both of its circuits for a short or open condition, repair or replace the switch, then clear the code with the monitoring system in service mode. |
| 274-3 | Atmospheric pressure sensor circuit, voltage above normal or shorted high. | Failed pressure sensor or a shorted/open sensor supply or signal wire. | Check the sensor connector and wiring for damage, verify sensor supply voltage, and replace the sensor if out of range; engine power derates automatically while this code stays active. |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
140H ES attachments & work tools
Rear ripper
A hydraulic multi-shank ripper bolts to the fixed rear hitch/drawbar frame behind the tandems for breaking up hardpan, frozen ground, or hard subgrade ahead of grading passes. Straight parallelogram shanks with replaceable teeth are standard for this grader size class; shank spacing is fixed by the ripper frame casting, not field-adjustable.
Scarifier, front and mid-mount
A front scarifier attaches to the front lift group for light-duty breakup of compacted material, thin asphalt, or rocky subgrade ahead of the moldboard. A mid/center-mount scarifier bolts under the main frame ahead of the tandems as an alternative where no front lift group is fitted. Shank and tip hardware for this scarifier are shared across the 12/140/160 series H, K, and M grader family, reflecting a common size class rather than a 140H-ES-unique part.
Front lift group work tools
The front lift group frame is the mounting point for front-end tools: reversible plows (hydraulic or manual reversing action, adjustable blade angle, horizontal pivot that follows the road crown), V-plows with a curved moldboard profile for high-volume snow throw, and one-way straight blades for bulk snow or light earthmoving. Manual reversible plows on this class can be field-upgraded to hydraulic reversing.
Snow wing
A snow wing is a supplementary moldboard mounted on the right side of the machine, run with or without the main moldboard or a front plow, to widen the cleared path per pass. Mast-type wings are built for throwing deep drifted snow; mastless wings are used for benching and shoulder work, ramping to roughly a 40-degree bench angle. Wing operation typically requires an auxiliary hydraulic valve circuit added to the machine, commonly paired with electro-hydraulic joystick controls so the extra wing functions can be run without leaving the main steering/blade controls.
Moldboard extension
A bolt-on extension adds roughly 600 mm (24 in) to the standard moldboard length for wider per-pass coverage in road maintenance and snow clearing. Standard moldboard width for the 140H-class grader is about 3.7 m (12 ft); exact blade height and cutting-edge spec vary by configuration/series.
Push block / nose plate push point
A push block mounts to the front nose plate of the machine. It acts as a counterweight to offset the added weight of a rear-mounted ripper and doubles as a push point when the grader is used to assist-start scrapers or other equipment on site.
Mounting and coupler system
This grader does not use a skid-steer-style quick coupler for work tools. The moldboard mounts through the standard circle-drawbar-moldboard assembly with bolt-on cutting edges and end bits; the rear ripper bolts to a fixed rear hitch/drawbar frame; front tools (plows, blades, scarifier) mount to the front lift group frame. Changing tool types is a bolt-up shop job, not a hydraulic quick-attach swap.
Guarding and protection packages
Dealer/factory-fit guarding available for this grader class includes a guard for the front axle lift cylinders, hydraulic lines, and fittings, plus a belly guard shielding the transmission from ground debris. Tandem fenders with mounted guardrails are also offered for sites with debris or embankment hazards.
All 140H ES assemblies by section
Every catalogued assembly group for the Caterpillar 140H ES. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
7e-5677 Air Cleaner Gp
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 10***56 | Air Cleaner Group | 1 |
| 10***57 | Tube As | 1 |
163-1850 Air Cleaner Gp
| 16***50 | Air Cleaner Group | 1 |
| 4P***24 | Seal-O-Ring | 1 |
| 6I***73 | Filter Element As-Air; (Primary) | 1 |
106-7656 Air Cleaner Gp
| 10***56 | Air Cleaner Group | 1 |
| 4P***24 | Seal-O-Ring | 1 |
| 6I***73 | Filter Element As-Air; (Primary) | 1 |
113-8513 Dust Ejector Gp
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 1 |
| 11***12 | Ejector As-Exhaust | 1 |
| 11***13 | Dust Ejector Group | 1 |
7e-5682 Fastener Gp-Exhaust Manifold
| 10***93 | Stud-Taperlock; (3/8-16x2.36-In)(3/8-16x60 Thd) | 1 |
| 1M***43 | Spacer; (10.5x25.4x18.21-mm Thk) | 1 |
| 2N***66 | Locknut; (3/8-16-Thd)(High Temperature) | 12 |
7c-2094 Lines Gp-Air
| 10***58 | Hose | 1 |
| 14***67 | Clamp; (Hose) | 1 |
| 5P***99 | Clamp; (Hose) | 1 |
110-0020 Lines Gp-Air
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 1 |
| 10***92 | Tube-Air | 1 |
6n-0164 Manifold Gp-Exhaust
| 6N***64 | Manifold Group-Exhaust | 1 |
| 7N***86 | Manifold-Exhaust | 1 |
| 9Y***79 | Gasket Manifold Mtg Part Of Kit P/N 5r***26 | 3 |
134-4208 Manifold Gp-Exhaust
| 13***00 | Manifold-Exhaust | 1 |
| 13***08 | Manifold Group-Exhaust | 1 |
| 8S***16 | Manifold-Exhaust; (Front) | 1 |
113-8511 Muffler & Mounting Gp
| 11***11 | Muffler & Mounting Group | 1 |
| 1B***55 | Nut,Plain,Hexagon Turbocharger Mounting | 2 |
| 26***57 | Muffler | 1 |
113-5340 Turbocharger Gp
| 11***40 | Turbocharger Group | 1 |
| 11***19 | Turbocharger Group | 1 |
| 1P***51 | Gasket; (Turbocharger) | 1 |
113-7919 Turbocharger Gp
| 11***19 | Turbocharger Group | 1 |
| 11***15 | Turbocharger Cartridge Group | 1 |
| 11***16 | Housing (Turbine) | 1 |
Basic Engine
3n-2886 Adapter Gp-Seal
| 0L***29 | Bolt- 7.63 cm(3 In.) Long - Location "H" | 1 |
| 2P***92 | Seal (Id=133.02mm) | 1 |
| 2W***62 | Retainer Assem. | 1 |
111-7994 Air Compressor Gp
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 4 |
| 10***60 | Kit-Major Repair; (Air Compressor) | 1 |
| 10***22 | Cylinder Head As | 1 |
110-5764 Air Compressor Gp
| 11***64 | Air Compressor Group | 1 |
| 15***46 | Kit-Unloader; (Air Compressor) | 1 |
109-1317 Air Compressor Gp
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 5 |
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 14 |
| 0T***65 | Bolt--3/8" X 3 1/2"--Use As Required; Bolt 5t***56 Plate To Cover Gp 4n***72 | 1 |
110-5765 Air Compressor Gp
| 0S***89 | Bolt, Hex. Hd., 5/8"-11 N.C. X 1 3/4" | 2 |
| 10***17 | Air Compressor Group | 1 |
| 11***65 | Air Compressor Group | 1 |
7w-8399 Air Compressor Gp
| 0S***89 | Bolt, Hex. Hd., 5/8"-11 N.C. X 1 3/4" | 2 |
| 11***94 | Air Compressor Group | 1 |
| 1D***40 | Bolt,Machine Fuel Filter Mounting | 2 |
1n-4406 Camshaft Gp
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 1N***06 | Camshaft Group-Single; Camshaft Group--Single | 1 |
| 4P***42 | Camshaft Group | 1 |
8n-3163 Cover Gp-Cylinder Block
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 2A***98 | Pin,Straight,Headle Flywheel Housing | 2 |
| 4B***38 | Plug 28.95 mm(1.14 In.) Hole Dia. | 1 |
2p-6530 Cover Gp-Cylinder Head
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 4 |
| 1P***67 | Cover,Access Cylinder Head | 1 |
| 2P***01 | Bolt Oil Filler Mounting; Used On Replacement Engine P/N 5r***83 | 4 |
2p-6529 Cover Gp-Front Housing
| 0S***89 | Bolt, Hex. Hd., 5/8"-11 N.C. X 1 3/4" | 2 |
| 2P***29 | Cover Group-Front Housing; Front Housing Cover Group | 1 |
| 3S***13 | Nut-Full-Straps & Brackets | 6 |
130-2223 Cover Gp-Sound Suppression
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 2 |
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 3 |
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 2 |
8n-4745 Cover Gp-Valve Mechanism
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 15 |
| 2W***86 | Cover As-Cylinder Head | 1 |
| 8N***45 | Cover Group-Valve Mechanism; Valve Mechanism Cover Group | 1 |
4p-9856 Crankshaft Gp
| 10***52 | Plate-Thrust | 2 |
| 19***34 | Kit-Basic Engine Repair; (Main Bearing)(Crankshaft) | 0 |
| 23***33 | Bearing-Main; (Standard)(Standard) | 7 |
120-4565 Crankshaft Gp
| 10***52 | Plate-Thrust | 2 |
| 12***64 | Crankshaft As | 1 |
| 12***65 | Crankshaft Group | 1 |
7n-6550 Cylinder Block Gp
| 10***12 | Insert; (Liner Seat) (.822-mm Thk) | 6 |
| 10***18 | Insert; (Liner Seat) (1.605-mm Thk) | 6 |
| 10***27 | Insert-Liner Seat (2.710mm Thk) | 6 |
1n-3576 Cylinder Block Gp
| 1N***76 | Cylinder Block Group | 1 |
| 1S***40 | Dowel; (30.23 mm X 9.37 mm) | 1 |
| 2S***58 | Washer-Hard; (17x29x3-mm Thk)(Engine Brake) | 14 |
8n-5286 Cylinder Block Gp
| 11***50 | Gasket-Plate | 1 |
| 1S***40 | Dowel; (30.23 mm X 9.37 mm) | 1 |
| 2B***58 | Plug--To Block Upper Front Air Manifold | 3 |
7n-8876 Cylinder Head Gp
| 10***60 | Valve (Intake) | 6 |
| 10***65 | Insert-Valve Seat; (Exhaust)(Standard) | 6 |
| 10***68 | Insert-Valve Seat; (Inlet)(Standard) | 6 |
7e-6200 Damper Gp
| 5S***48 | Washer-Special | 1 |
| 6H***17 | Bolt,Machine Damper Use On Replacement Engine 5r***83 | 6 |
| 7B***63 | Screw,Cap,Hexagon Head Pulley Mtg | 1 |
107-9542 Drive Gp-Fan
| 09***49 | Bolt; (M8x1.25x40-mm) | 6 |
| 10***42 | Drive Group-Fan | 1 |
| 10***75 | Pulley | 1 |
7c-2091 Drive Gp-Fan
| 10***79 | Pulley; (3-Groove) | 1 |
| 15***52 | Support As | 1 |
| 16***59 | V-Belt Set; (Includes 3-Belts)(Fan Drive) | 1 |
7c-8365 Drive Gp-Fan
| 4W***03 | Cup-Roller Bearing | 2 |
| 4W***04 | Cone-Roller Bearing | 2 |
| 4W***42 | Spacer; (35.3x45.5x38.331-mm Thk) | 1 |
7n-9536 Fastener Gp-Cylinder Head
| 1B***09 | Bolt-- Head To Cylinder Block | 5 |
| 1D***95 | Bolt (5/8-11x6in); (5/8-11x6-In) | 20 |
| 2S***36 | Washer,Flat Cover Assembly Mounting And Flywheel Housing Cover | 25 |
1w-3802 Fastener Gp-Front Housing
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 17 |
| 1C***51 | Bolt--Installation Of 2v***26 Retainer | 2 |
| 1W***02 | Fastener Group-Front Housing | 1 |
170-2496 Fastener Gp-Oil Pan
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 3 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 18 |
| 0T***73 | Bolt (3/8) (63.5mm Long) (On Cab Of Cover Assem.) | 5 |
2p-6200 Fastener Gp-Oil Pan
| 03***35 | Bolt-Self Locking; 2.22cm(.875 In.) Lg | 18 |
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 5 |
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 3 |
7e-5680 Flywheel Gp
| 0S***76 | Bolt 5.08 cm(2 In.) Long | 9 |
| 7E***80 | Flywheel Group | 1 |
| 7E***67 | Flywheel As | 1 |
111-8001 Gear Gp-Front
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 2 |
| 0S***48 | Bolt,Machine Camshaft Gear Mounting | 4 |
7e-5681 Housing Gp-Flywheel
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 13 |
| 2A***62 | Gasket; (Rear Gear Housing Drain Plug) | 1 |
| 5F***04 | Plug-Drain; (5/8-18-2a Thd. Flywheel Housing) | 1 |
8n-0303 Housing Gp-Front
| 1W***00 | Gasket Timing Gear Cover | 1 |
| 1W***16 | Plate As-Front | 1 |
| 5M***14 | Pipe Plug Cylinder Block Oil Pressure | 1 |
7n-9122 Lifting Gp-Engine
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 4 |
| 13***14 | Plate-Lifting | 1 |
| 5P***47 | Washer (Bracket To Valve Support) | 4 |
135-5094 Lines Gp-Air Compressor
| 03***72 | Elbow; (Flared 90 Degree) | 1 |
| 13***94 | Lines Group-Air Compressor | 1 |
| 13***66 | Adapter | 1 |
128-0065 Lines Gp-Air Compressor
| 03***69 | Elbow-Flared; (1/2-14 Nptf) | 1 |
| 12***65 | Lines Group-Air Compressor | 1 |
| 2N***87 | Elbow-Flared Needed For Customer; (Used Without Brakesaver) | 1 |
7c-2096 Mounting Gp-Engine & Xmsn
| 1J***29 | Bolt-Plt; (1unc X 6) | 2 |
| 21***74 | Support; (Rh) | 1 |
| 21***75 | Support; (Lh) | 1 |
2p-9647 Pan Gp-Oil
| 11***36 | Adapter As-Drain | 1 |
| 1S***04 | Lug (Use As Required) | 1 |
| 2P***38 | Plate Assem, Including:- | 1 |
123-4103 Panel Gp-Sound Suppression
| 10***66 | Panel-Insulation; (Lh) | 1 |
| 12***03 | Panel Group-Sound Suppression | 1 |
| 12***52 | Panel-Insulation; (Rh) | 1 |
1w-6588 Piston & Rod Gp
| 16***60 | Body As-Piston; (Requires 4mm Thick Oil Ring) | 1 |
| 1P***56 | Bolt,Shoulder Connecting Rod | 2 |
| 1S***43 | Ring,Retaining Piston Pin | 2 |
2p-6224 Seal Gp-Crankshaft
| 2P***24 | Seal Group-Crankshaft; Crankshaft Seal Group | 1 |
| 4W***52 | Seal Group-Crankshaft; (Counter Clockwise Rotation) | 1 |
| 9Y***95 | Seal Group-Crankshaft; (Clockwise Rotation) | 1 |
7c-3626 Support Gp-Engine
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 2 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 5 |
| 5M***94 | Washer; Bracket To Tee, Bracket To Block, Tube As. To Tee, Tube As. To Oil Cooler | 8 |
100-2861 Suppression Gp-Sound
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 3 |
| 10***61 | Suppression Group-Sound | 1 |
| 12***67 | Clip | 5 |
141-5102 Suppression Gp-Sound
| 00***26 | Bolt | 1 |
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 2 |
| 14***01 | Panel As; (Lh) | 1 |
100-2863 Suppression Gp-Sound
| 00***26 | Bolt | 1 |
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 2 |
| 10***63 | Suppression Group-Sound | 1 |
7c-7013 Valve Mechanism Gp
| 1B***09 | Bolt-- Head To Cylinder Block | 1 |
| 1L***72 | Dowel (Part Of 8s***99 Assem.) | 1 |
| 2S***36 | Washer,Flat Cover Assembly Mounting And Flywheel Housing Cover | 1 |
7n-8026 Valve Mechanism Gp
| 5S***18 | Push Rod,Engine Pop Valve Lifter | 12 |
| 7C***13 | Valve Mechanism Group | 1 |
| 7N***26 | Valve Mechanism Group; Valve Mechanism Group | 1 |
Braking System
8w-5750 Air Dryer Gp
| 10***19 | Door As | 1 |
| 14***87 | Hose As | 1 |
| 15***45 | Kit-Mounting | 1 |
9w-5132 Brake Gp-Parking
| 1P***21 | Yoke | 1 |
| 20***57 | Seal | 1 |
| 20***58 | Seal | 1 |
7d-8440 Brake Gp-Service
| 0S***66 | Bolt-Pulley To Crankshaft Adapter | 16 |
| 14***10 | Spindle-Wheel | 4 |
| 1P***93 | Cup-Roller Bearing | 8 |
8w-5934 Control Gp-Parking Brake
| 11***34 | Hose As | 1 |
| 25***47 | Valve As-Air; (Parking Brake) | 1 |
| 3B***22 | Elbow (Use As Required) | 1 |
8w-7490 Control Gp-Service Brake
| 11***26 | Plate As | 1 |
| 12***44 | Plate As | 1 |
| 12***73 | Bolt-12 Point Head; (3/8-16x1.25-In)(3/8-16thd) | 1 |
123-3841 Control Gp-Service Brake
| 00***43 | Elbow 5wd342 - Up Including 5wd329 - 335, 5wd337 - 340 | 1 |
| 03***77 | Tee-Pipe | 1 |
| 09***22 | Seal-O-Ring (Id=20.80mm) | 5 |
113-5061 Tank Gp-Air
| 00***53 | Elbow-Pipe; (1/2-14 Nptf Thd) | 2 |
| 00***33 | Tee-Pipe | 1 |
| 11***49 | Tank As | 1 |
185-0008 Valve Gp-Solenoid
| 15***70 | Nut; (1/2-20-2b-Thd) | 1 |
| 16***08 | Washer; (13.03x25.4x2.38-mm Thk) | 1 |
| 18***08 | Valve Group-Solenoid; -Air Horn | 1 |
7t-9074 Valve Gp-Solenoid
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
| 7N***37 | Housing-To Air Start Solenoid Valve | 1 |
Cooling System
2w-7280 Cooler Gp-Fltr Base & Eng Oil
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 1 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
2w-7279 Cooler Gp-Fltr Base & Eng Oil
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 3 |
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 3 |
147-0359 Cooler Gp-Fltr Base & Eng Oil
| 0L***52 | Capscrew (3/8 - 16 Nc X 3 1/4 Gd8, Hex) | 1 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 14***59 | Cooler Group-Filter Base & Eng Oil | 1 |
147-0360 Cooler Gp-Fltr Base & Eng Oil
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 3 |
| 14***60 | Cooler Group-Filter Base & Eng Oil | 1 |
140-9810 Cover Gp-Fan
| 12***06 | Stud | 12 |
| 14***10 | Cover Group-Fan | 1 |
| 14***57 | Cover-Fan | 1 |
8w-5794 Extension Gp-Drain
| 00***14 | Coupling-Pipe | 1 |
| 00***34 | Elbow-Pipe | 1 |
| 1P***97 | Valve-Drain; (Radiator) | 1 |
7c-2095 Fan Gp-Blower -Radiator
| 10***07 | Spider As-Fan; (6-Blade) | 1 |
| 7C***95 | Fan Group-Blower; -Radiator | 1 |
| 8T***21 | Washer-Hard; (11x21x2.5-mm Thk)(M10x1.50x30mm) | 6 |
8n-0888 Regulator Gp-Temperature
| 11***10 | Regulator-Water Temperature; (91 Deg Celsius) | 1 |
| 7N***44 | Gasket; (Temperature Regulator Housing) | 1 |
| 8N***43 | Pipe-Head Outlet | 1 |
2y-9679 Housing & Regulator Gp
| 11***10 | Regulator-Water Temperature; (91 Deg Celsius) | 1 |
| 2Y***79 | Housing & Regulator Group | 1 |
| 7H***71 | Plug,Pipe Base Assembly,Engine Oil Filter Assembly | 1 |
8w-5829 Lines Gp-Water
| 2A***40 | Tube | 1 |
| 2A***41 | Hose | 1 |
| 3P***47 | Clamp | 2 |
2w-7060 Lines Gp-Water
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 1 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 2 |
| 0T***65 | Bolt--3/8" X 3 1/2"--Use As Required; Bolt 5t***56 Plate To Cover Gp 4n***72 | 1 |
106-3926 Pump Gp-Water
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 10***26 | Pump Group-Water | 1 |
106-3927 Pump Gp-Water
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 2 |
| 10***26 | Pump Group-Water | 1 |
| 10***27 | Pump Group-Water | 1 |
7c-2099 Radiator Gp
| 16***64 | Radiator Group | 1 |
| 16***65 | Radiator Group | 1 |
| 6L***17 | Cap-Radiator; (7-Psi)(Coolant Tank) | 1 |
7c-2098 Radiator Gp
| 13***77 | Bracket | 2 |
| 18***80 | Radiator Group | 1 |
| 1F***50 | Nut Rops Support | 2 |
7e-5679 Radiator Gp
| 13***77 | Bracket | 2 |
| 2A***04 | Plate As | 2 |
| 4L***54 | Capscrew; (3/8-16x21 In) (Gd8) (Hex Hd) (4-Roller) | 4 |
151-0996 Regulator Gp-Temperature
| 11***77 | Regulator-Water Temperature; (86-Deg C To 97-Deg C) | 1 |
| 15***96 | Regulator Group-Temperature | 1 |
| 7N***44 | Gasket; (Temperature Regulator Housing) | 1 |
Electrical And Starting System
9g-9813 Alarm Gp
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
| 7N***37 | Housing-To Air Start Solenoid Valve | 1 |
8x-8046 Alternator Ar-Charging
| 3E***77 | Alternator Group-Charging | 1 |
| 8X***46 | Alternator Ar-Charging | 1 |
150-7669 Alternator Ar-Charging
| 0S***70 | Cap Screw (5/8" Long) | 2 |
| 15***69 | Alternator Ar-Charging | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 2 |
3e-7577 Alternator Gp-Charging
| 10***31 | Fan-Alternator; (11-Blade) | 1 |
| 10***32 | Collar; (Alternator) | 1 |
| 10***56 | Diode As; (Alternator) | 1 |
152-5584 Alternator Gp-Charging
| 11***01 | Alternator Group-Charging | 1 |
| 15***84 | Alternator Group-Charging | 1 |
| 1F***48 | Nut 12.70 mm(.50 In.) Thread | 1 |
100-5046 Alternator Gp-Charging
| 10***46 | Alternator Group-Charging; -24-Volt, 50-Ampere | 1 |
| 1B***05 | Key; (Woodruff) | 1 |
| 2K***21 | Locknut (5/8-18 Thd) | 1 |
9x-7803 Alternator Gp-Charging
| 03***12 | Screw-Forming; (10-24x0.5-In) | 4 |
| 10***31 | Fan-Alternator; (11-Blade) | 1 |
| 10***32 | Collar; (Alternator) | 1 |
114-2401 Alternator Gp-Charging
| 03***12 | Screw-Forming; (10-24x0.5-In) | 4 |
| 10***31 | Fan-Alternator; (11-Blade) | 1 |
| 10***32 | Collar; (Alternator) | 1 |
4p-2678 Alternator Gp-Charging
| 10***47 | Alternator Group-Charging; -24-Volt, 50-Ampere | 1 |
| 12***94 | Strap-Belt Adjustment | 1 |
| 1F***48 | Nut 12.70 mm(.50 In.) Thread | 1 |
100-5045 Alternator Gp-Charging
| 10***45 | Alternator Group-Charging; (Nippondenso) | 1 |
| 1B***05 | Key; (Woodruff) | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 1 |
316-7251 Alternator Gp-Charging
| 10***31 | Fan-Alternator; (11-Blade) | 1 |
| 18***34 | Nut-Flange; (5/8-18-Thd) | 1 |
| 1H***44 | Lockwasher (Bracket To Cab) | 2 |
100-5047 Alternator Gp-Charging
| 10***45 | Alternator Group-Charging; (Nippondenso) | 1 |
| 10***46 | Alternator Group-Charging; -24-Volt, 50-Ampere | 1 |
| 10***47 | Alternator Group-Charging; -24-Volt, 50-Ampere | 1 |
154-6527 Control Gp-Power Train
| 15***27 | Control Group-Power Train | 1 |
143-9634 Control Gp-Power Train
| 14***34 | Control Group-Power Train | 1 |
177-4493 Control Gp-Power Train
| 17***89 | Control Group-Unprogrammed; -Steering, Transmission | 1 |
| 17***93 | Control Group-Power Train | 1 |
134-6553 Control Gp-Power Train
| 13***53 | Control Group-Power Train | 1 |
3e-5184 Control Gp-Secondary Steering
| 1S***93 | Strap; (Cable) (0.62in Dia) | 6 |
| 3E***84 | Control Group-Secondary Steering; -Electronic Monitoring System | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 5 |
132-2148 Control Gp-Unprogrammed
| 10***52 | Screw-Pan Head; (8-32x0.375-In) | 1 |
| 13***48 | Control Group-Unprogrammed; -Power Train | 1 |
| 6V***03 | Kit; (Retaining Bolt) (Each Includes Bolt, Retaining Ring And 4 O-Ring Seals) | 2 |
172-9389 Control Gp-Unprogrammed
| 10***52 | Screw-Pan Head; (8-32x0.375-In) | 1 |
| 13***26 | Washer; (4.52x8.28x0.76-mm Thk) | 1 |
| 17***89 | Control Group-Unprogrammed; -Steering, Transmission | 1 |
142-3363 Control Gp-Unprogrammed
| 10***52 | Screw-Pan Head; (8-32x0.375-In) | 1 |
| 14***63 | Control Group-Unprogrammed; -Electronic Hydrostatic Control | 1 |
| 6V***03 | Kit; (Retaining Bolt) (Each Includes Bolt, Retaining Ring And 4 O-Ring Seals) | 2 |
145-1278 Converter Ar-Electrical -Low
| 14***42 | Accessory Group-Cab; -Low | 1 |
| 14***61 | Converter Group-Electrical | 1 |
| 14***78 | Converter Ar-Electrical; -Low | 1 |
145-1279 Converter Ar-Electrical -High
| 14***47 | Accessory Group-Cab; -High | 1 |
| 14***61 | Converter Group-Electrical | 1 |
| 14***79 | Converter Ar-Electrical; -High | 1 |
145-1297 Converter Gp-Electrical
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 14***97 | Converter Group-Electrical; -Radio | 1 |
| 20***85 | Converter Group-Electrical; (24-Volt To 12-Volt)(Air Conditioner, Heater) | 1 |
145-1261 Converter Gp-Electrical
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 2 |
| 14***61 | Converter Group-Electrical | 1 |
| 20***85 | Converter Group-Electrical; (24-Volt To 12-Volt)(Air Conditioner, Heater) | 1 |
112-0830 Converter Gp-Electrical
| 10***56 | Plate | 1 |
| 11***29 | Harness As-Radio | 1 |
| 11***30 | Converter Group-Electrical | 1 |
148-3074 Electronics Gp-Power Train
| 14***74 | Electronics Group-Power Train | 1 |
| 17***89 | Control Group-Unprogrammed; -Steering, Transmission | 1 |
| 22***12 | Software Group-Power Train | 2 |
144-8622 Electronics Gp-Power Train
| 14***22 | Electronics Group-Power Train | 1 |
| 17***89 | Control Group-Unprogrammed; -Steering, Transmission | 1 |
| 25***84 | Software Group-Power Train | 2 |
1w-1361 Heater Gp-Jacket Water
| 1W***61 | Heater Group-Jacket Water | 1 |
| 3T***18 | Element As-Jacket Water Heater; (240-Volt, 1250-Watt)(240v/1250w) | 1 |
| 4N***27 | Cord As-Heater Element; -Jacket Water | 1 |
8c-9678 Lamp Gp-Dome
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 2 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
| 7N***82 | Housing (Plug) (To Lift Kickout Switch) | 1 |
9x-1439 Lamp Gp-Flood -Vertical
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 9X***39 | Lamp Group-Flood; -Rear-Ladder Access-Engine Work Light | 1 |
| 9X***55 | Body As-Lamp | 1 |
162-3294 Lamp Gp-Flood
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***52 | Bezel | 1 |
| 16***94 | Lamp Group-Flood; -Rear-Ladder Access-Engine Work Light | 1 |
9x-6775 Lamp Gp-Flood -Front, Rear
| 8T***37 | Screw; (Machine) (M4x0.7x12mm) | 2 |
| 9X***55 | Body As-Lamp | 1 |
| 9X***63 | Lamp-Halogen; (24-Volt, 70-Watt)(Floodlight) | 1 |
3e-7587 Lamp Gp-Head & Signal -Lh-High/Low-Turn
| 10***45 | Lamp; (24-Volt)(Running Lights), Cover | 1 |
| 10***47 | Body As-Lamp | 1 |
| 10***49 | Lens As; (Headlight) | 1 |
3e-7586 Lamp Gp-Head & Signal -Rh-High/Low-Turn
| 10***45 | Lamp; (24-Volt)(Running Lights), Cover | 1 |
| 10***47 | Body As-Lamp | 1 |
| 10***48 | Lens As; (Headlight)(High, Low Beam) | 1 |
117-8318 Lamp Gp-Signal
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 11***18 | Lamp Group-Signal | 1 |
| 13***15 | Lamp; (24-Volt, 5-Watt)(Floodlight) | 3 |
7x-6066 Lamp Gp-Signal
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
| 7N***37 | Housing-To Air Start Solenoid Valve | 1 |
130-3452 Lamp Gp-Stop & Tail
| 13***52 | Lamp Group-Stop & Tail | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 2 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 1 |
128-6983 Lamp Gp-Warning Beacon -Rotating, Amber
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 12***83 | Lamp Group-Warning Beacon; -Rotating, Amber | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
123-1215 Lighting Ar-Flood
| 11***79 | Lighting Group-Flood | 1 |
| 12***15 | Lighting Ar-Flood | 1 |
| 12***17 | Lighting Group-Flood | 1 |
123-1217 Lighting Gp-Flood
| 10***57 | Bracket Assem. | 4 |
| 12***17 | Lighting Group-Flood | 1 |
| 3P***54 | Grommet | 2 |
112-6079 Lighting Gp-Flood
| 10***90 | Harness As-Front Lighting; (Blade) | 2 |
| 10***92 | Harness As-Rear Lighting; (Floodlights) | 2 |
| 10***93 | Harness As-Rear Lighting | 1 |
123-1332 Lighting Gp-Roading
| 12***32 | Lighting Group-Roading | 1 |
| 3E***87 | Lamp Group-Head; -Lh-Roading, Dipped, Lh | 2 |
118-8584 Lighting Gp-Signal
| 11***50 | Harness As | 1 |
| 11***51 | Harness As | 1 |
| 11***18 | Lamp Group-Signal | 2 |
8x-5700 Lighting Gp-Warning
| 10***62 | Switch As; (Warning Beacon) | 1 |
| 10***32 | Plate As | 1 |
| 12***83 | Lamp Group-Warning Beacon; -Rotating, Amber | 1 |
170-5335 Motor Gp-Electric -Circulating Fan
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***35 | Motor Group-Electric; -Circulating Fan | 1 |
| 9W***52 | Pin-Connector; (14-Ga To 16-Ga) | 2 |
117-3915 Motor Gp-Electric
| 11***15 | Motor Group-Electric; -Engine Prelubrication-Sec Steering, Brake Release | 1 |
| 6V***01 | Nut; (3/8-16-Thd)(Plate To Rh And Lh Bracket As) | 2 |
| 7X***08 | Washer-Hard; (10.2x16x2-mm Thk) | 2 |
149-0425 Road Speed Ar-Limited
| 14***73 | Electronics Group-Power Train | 1 |
| 14***25 | Road Speed Ar-Limited | 1 |
189-5746 Sensor Gp-Speed
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***36 | Pin-Connector; (14-Ga To 18-Ga) | 2 |
| 17***49 | Strap; (Marker) | 1 |
7w-3355 Sensor Gp-Speed
| 3E***86 | Sensor Group-Speed; -Magnetic, Low Output | 1 |
| 4B***81 | Washer--Use With Customer'S Ground Bolt | 1 |
| 7W***55 | Sensor Group-Speed; -Engine Timing | 1 |
105-5152 Sensor Gp-Speed
| 10***87 | Sensor Group-Speed; (Transmission Output) | 1 |
| 10***52 | Sensor Group-Speed | 1 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 1 |
3e-7886 Sensor Gp-Speed
| 17***49 | Strap; (Marker) | 1 |
| 3E***86 | Sensor Group-Speed; -Magnetic, Low Output | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 1 |
3e-8700 Sensor Gp-Temperature
| 15***60 | Kit-Connecting Plug; (3-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 3 |
| 3E***00 | Sensor Group-Temperature; -Transmission Oil | 1 |
145-5172 Service Gp-Power Train
| 14***72 | Service Group-Power Train | 1 |
| 17***89 | Control Group-Unprogrammed; -Steering, Transmission | 1 |
| 22***03 | Software Group-Power Train | 2 |
6i-3792 Solenoid Gp-Control
| 03***44 | Seal-O-Ring | 1 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 0S***17 | Bolt --Use Open Hole In Compressor Body | 3 |
108-6496 Starting Aid Gp-Ether
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***96 | Starting Aid Group-Ether | 1 |
| 11***39 | Tube | 1 |
8w-4619 Starting Aid Gp-Ether
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***35 | Tube | 1 |
| 3E***65 | Wedge; (Receptacle Lock) (2 Pin) | 1 |
1w-3851 Starting Motor Gp-Electric
| 10***55 | Starting Motor Group-Electric | 1 |
| 1W***51 | Starting Motor Group-Electric | 1 |
| 4H***69 | Gasket Starter Mtg Part Of Kit P/N 5r***25 | 1 |
207-1555 Starting Motor Gp-Electric
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 19***70 | Solenoid As-Starting Motor; (24-Volt)(Starting Motor) | 1 |
| 20***55 | Starting Motor Group-Electric; (Delco Remy) | 1 |
6v-5226 Starting Motor Gp-Electric
| 3E***25 | Cover As; (Starting Motor) | 1 |
| 3E***27 | Kit-Bearing; (Starting Motor)(Incl Bearing Seals & Spacers) | 1 |
| 3E***28 | Kit; (Brush) (Includes O-Rings, Screw, Spring, & Brush) | 1 |
6v-5537 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 2H***29 | Ring - Retaining External | 1 |
6v-5023 Starting Motor Gp-Electric
| 5C***74 | Nut (M5x.8 Thd); (M5x0.8-Thd) | 2 |
| 6V***23 | Starting Motor Group-Electric | 1 |
| 7X***62 | Washer-Hard; (13.5x19x0.8-mm Thk) | 5 |
207-1560 Starting Motor Gp-Electric
| 20***60 | Starting Motor Group-Electric | 1 |
| 20***61 | Starting Motor Group-Electric | 1 |
| 6V***38 | Starting Motor Group-Electric | 1 |
207-1554 Starting Motor Gp-Electric
| 20***54 | Starting Motor Group-Electric | 1 |
| 20***55 | Starting Motor Group-Electric; (Delco Remy) | 1 |
| 6V***26 | Starting Motor Group-Electric | 1 |
6v-5538 Starting Motor Gp-Electric
| 3E***25 | Cover As; (Starting Motor) | 1 |
| 3E***27 | Kit-Bearing; (Starting Motor)(Incl Bearing Seals & Spacers) | 1 |
| 3E***28 | Kit; (Brush) (Includes O-Rings, Screw, Spring, & Brush) | 1 |
207-1561 Starting Motor Gp-Electric
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 20***61 | Starting Motor Group-Electric | 1 |
| 25***79 | Kit-Solenoid; (24-Volt)(Starting Motor) | 1 |
106-8552 Starting Motor Gp-Electric
| 10***52 | Starting Motor Group-Electric | 1 |
| 5C***74 | Nut (M5x.8 Thd); (M5x0.8-Thd) | 2 |
| 7X***62 | Washer-Hard; (13.5x19x0.8-mm Thk) | 5 |
106-8555 Starting Motor Gp-Electric
| 10***55 | Starting Motor Group-Electric | 1 |
| 6V***23 | Starting Motor Group-Electric | 1 |
| 6V***07 | Starting Motor Group-Electric | 1 |
6v-5227 Starting Motor Gp-Electric
| 10***52 | Starting Motor Group-Electric | 1 |
| 6V***27 | Starting Motor Group-Electric | 1 |
| 6V***37 | Starting Motor Group-Electric | 1 |
6v-5207 Starting Motor Gp-Electric
| 03***21 | Shim Lever Housing | 1 |
| 03***23 | Bolt; (1/4-28x1-In) | 5 |
| 2H***29 | Ring - Retaining External | 1 |
105-8827 Suppressor Gp-Electronic
| 10***27 | Suppressor Group-Electronic; -Air Conditioner Compressor | 1 |
| 7N***79 | Socket-Governor Solenoid Wire To Housing | 2 |
| 7N***80 | Pin-Connector; (14-Ga To 18-Ga) | 2 |
7n-0718 Switch Gp-Disconnect -Battery
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
| 7N***18 | Switch As-Disconnect; -Battery-Ground Level | 1 |
142-3984 Switch Gp-Magnetic -Prelubrication
| 14***84 | Switch As-Magnetic; -Secondary Steering Relay-Engine Prelubrication Relay | 1 |
| 1B***78 | Nut,Plain,Hexagon Rod To Lever Uoc:Bsv,Bsx | 2 |
| 4D***26 | Washer,Lock Starter Ground Cable, Internal And External Teeth | 2 |
142-3985 Switch Gp-Magnetic -Prelubrication
| 14***85 | Switch As-Magnetic; -Secondary Steering Relay-Engine Prelubrication Relay | 1 |
| 1B***78 | Nut,Plain,Hexagon Rod To Lever Uoc:Bsv,Bsx | 2 |
| 6V***78 | Nut; (10-32-Thd) | 2 |
3e-0154 Switch Gp-Magnetic -Secondary Steering Relay
| 3E***54 | Switch Group-Magnetic; -Secondary Steering Relay-Engine Prelubrication Relay | 1 |
| 4D***26 | Washer,Lock Starter Ground Cable, Internal And External Teeth | 2 |
| 6V***78 | Nut; (10-32-Thd) | 2 |
167-0138 Switch Gp-Magnetic -Main Relay
| 15***61 | Wedge-Plug Lock; (2-Pin) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 16***38 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
9g-7641 Switch Gp-Start -Engine, Key
| 6V***24 | Lock As-Cylinder | 1 |
| 6V***62 | Screw-Machine; (8-32x0.31-In) | 4 |
| 7T***99 | Nut-Mounting; (1-32-Thd) | 1 |
127-2978 Warning Gp-Backup
| 11***18 | Clip | 1 |
| 12***78 | Warning Group-Backup | 1 |
| 1F***50 | Nut Rops Support | 2 |
2a-6469 Wiring Gp-Blade Cushion
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 10***88 | Harness As-Chassis; (Blade Cushion) | 1 |
| 2A***69 | Wiring Group-Blade Cushion | 1 |
112-5940 Wiring Gp-Cab
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 3 |
| 10***61 | Harness As-Cab; (Rear)(Rear Cab) | 1 |
| 10***81 | Harness As-Panel; (Cab Fuse Panel) | 1 |
151-6925 Wiring Gp-Cab
| 10***62 | Switch As; (Warning Beacon) | 1 |
| 10***32 | Plate As | 1 |
| 11***18 | Clip | 1 |
112-5961 Wiring Gp-Console
| 10***90 | Plate | 1 |
| 11***61 | Wiring Group-Console | 1 |
| 11***06 | Harness As-Console | 1 |
112-5956 Wiring Gp-Engine
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
| 10***84 | Plate | 1 |
112-5979 Wiring Gp-Front
| 03***07 | Terminal-Ring; (0-Ga, 3/8-In Screw) | 2 |
| 10***04 | Cable As | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
112-5986 Wiring Gp-Rear
| 03***07 | Terminal-Ring; (0-Ga, 3/8-In Screw) | 2 |
| 06***61 | Cable As; (Negative) | 1 |
| 09***79 | Plug | 2 |
112-5945 Wiring Gp-Shutoff
| 11***45 | Wiring Group-Shutoff | 1 |
| 11***47 | Harness As | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 3 |
112-5975 Wiring Gp-Steering Console
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 6 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 10***83 | Plate | 1 |
Engine Arrangement
119-0277 Engine Ar
| 10***27 | Pump Group-Water | 1 |
| 10***57 | Pump Group-Engine Oil | 1 |
| 11***20 | Lines Group-Air | 1 |
146-4337 Engine Ar
| 10***27 | Pump Group-Water | 1 |
| 10***57 | Pump Group-Engine Oil | 1 |
| 11***20 | Lines Group-Air | 1 |
111-8003 Engine Ar
| 10***27 | Pump Group-Water | 1 |
| 10***57 | Pump Group-Engine Oil | 1 |
| 11***20 | Lines Group-Air | 1 |
110-1596 Engine Ar
| 10***61 | Suppression Group-Sound | 1 |
| 10***63 | Suppression Group-Sound | 1 |
| 10***27 | Pump Group-Water | 1 |
146-4336 Engine Ar
| 10***61 | Suppression Group-Sound | 1 |
| 10***27 | Pump Group-Water | 1 |
| 10***57 | Pump Group-Engine Oil | 1 |
133-6376 Engine Ar
| 10***61 | Suppression Group-Sound | 1 |
| 10***63 | Suppression Group-Sound | 1 |
| 10***27 | Pump Group-Water | 1 |
123-4193 Installation Ar-Engine
| 11***11 | Muffler & Mounting Group | 1 |
| 11***13 | Dust Ejector Group | 1 |
| 12***93 | Installation Ar-Engine | 1 |
133-4880 Installation Ar-Engine
| 11***11 | Muffler & Mounting Group | 1 |
| 11***13 | Dust Ejector Group | 1 |
| 12***65 | Lines Group-Air Compressor | 1 |
123-6070 Suppression Ar-Sound
| 10***42 | Drive Group-Fan | 1 |
| 11***96 | Engine Ar | 1 |
| 11***45 | Wiring Group-Shutoff | 1 |
Frame And Body
134-1080 Axle Gp-Front
| 03***60 | Cup-Roller Bearing | 2 |
| 03***61 | Cone-Roller Bearing | 2 |
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 1 |
101-8075 Axle Gp-Front
| 03***60 | Cup-Roller Bearing | 2 |
| 03***61 | Cone-Roller Bearing | 2 |
| 0S***92 | Bolt--Cover To Flywheel Housing | 2 |
8x-5330 Box Gp-Battery
| 03***44 | Rivet (For Outside Japan); Rivet (For Outside Japan) | 6 |
| 13***25 | Support As-Lh | 1 |
| 13***26 | Support As-Rh | 1 |
7i-5116 Bumper Gp-Rear
| 7I***83 | Bumper As | 1 |
| 7I***16 | Bumper Group-Rear | 1 |
| 7X***01 | Bolt; (1-8x1.75-In) | 8 |
8w-5470 Case & Frame Gp
| 2A***98 | Gasket | 1 |
| 2D***38 | Stud-Taperlock; (5/8-11x2.5-In) | 12 |
| 2R***00 | Stud-Taperlock | 38 |
113-9813 Cover Gp-Protection
| 11***13 | Cover Group-Protection | 1 |
| 12***03 | Cover-Door | 2 |
| 12***04 | Cover-Radiator | 1 |
126-6933 Cover Gp-Protection -Accugrade
| 12***29 | Cover | 1 |
| 12***30 | Cover | 1 |
| 12***33 | Cover Group-Protection; -Accugrade | 1 |
7i-4942 Enclosure Gp-Engine
| 11***36 | Cover | 1 |
| 11***57 | Rod | 2 |
| 11***17 | Handrail | 2 |
8w-6248 Frame Gp-Front
| 10***21 | Support As | 1 |
| 10***22 | Support As | 1 |
| 11***04 | Cover-Rh | 1 |
141-2995 Frame Gp-Front
| 11***45 | Plate | 2 |
| 14***94 | Frame As | 1 |
| 14***95 | Frame Group-Front | 1 |
140-7616 Guard & Support Gp-Radiator
| 10***96 | Grill As-Radiator | 1 |
| 11***17 | Handrail | 2 |
| 12***27 | Seal; (95-cm Each) | 0 |
8w-5385 Guard & Support Gp-Radiator
| 10***96 | Grill As-Radiator | 1 |
| 10***56 | Support As | 1 |
| 11***17 | Handrail | 2 |
161-9100 Guard & Support Gp-Radiator
| 10***96 | Grill As-Radiator | 1 |
| 11***17 | Handrail | 2 |
| 12***27 | Seal; (95-cm Each) | 0 |
8w-6230 Guard Gp-Bottom
| 0L***78 | Bolt,Machine Governor And Decelerator Control | 4 |
| 3B***40 | Nipple-Pipe | 2 |
| 5P***66 | Capscrew; (Hex Hd) (1/2-13 Nc X 1 1/2) (Gd 8 Z) | 8 |
111-4923 Guard Gp-Brake Lines
| 11***23 | Guard Group-Brake Lines | 1 |
| 11***26 | Plate | 2 |
| 11***27 | Plate | 2 |
8w-5870 Guard Gp-Drive Shaft
| 10***17 | Shield | 1 |
| 10***19 | Shield As | 1 |
| 5C***65 | Bolt-Plt; (1/2unc X 1 1/8) | 4 |
106-4884 Hitch Gp-Articulating
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 6 |
| 0S***87 | Bolt-Bracket Assembly To Timing Gear | 2 |
| 0S***89 | Bolt, Hex. Hd., 5/8"-11 N.C. X 1 3/4" | 4 |
262-1430 Lines Gp-Lubrication
| 23***64 | Hose As | 1 |
| 23***65 | Block | 1 |
| 26***30 | Lines Group-Lubrication | 1 |
234-8936 Lines Gp-Lubrication
| 22***74 | Enclosure As | 1 |
| 23***64 | Hose As | 1 |
| 23***65 | Block | 1 |
7i-4610 Lines Gp-Lubrication
| 3B***69 | Elbow-Adapter To Fitting | 2 |
| 3B***33 | Fitting; (Nipple-Pipe) | 1 |
| 3B***89 | Fitting-Grease; (Fan And Alternator Drive) | 2 |
7d-8912 Link Gp-Steering
| 13***37 | Tie Rod Group; (Rh Thread, Lh)(Rh Thread)(Left Side) | 1 |
| 13***38 | Tie Rod Group; (Lh Thread, Rh)(Lh Thread)(Right Side) | 1 |
| 13***39 | Tie Rod | 1 |
140-9812 Protection Ar-Snow Plow
| 11***23 | Guard Group-Brake Lines | 1 |
| 12***59 | Plate | 1 |
| 14***12 | Protection Ar-Snow Plow | 1 |
140-9808 Protection Ar-Snow Plow
| 10***50 | Film; (Air Cleaner) (Radial Seal) (On Air Cleaner Cover) | 1 |
| 14***08 | Protection Ar-Snow Plow | 1 |
| 14***10 | Cover Group-Fan | 1 |
113-9817 Protection Ar-Snow Plow
| 11***23 | Guard Group-Brake Lines | 1 |
| 11***62 | Plate | 2 |
| 11***13 | Cover Group-Protection | 1 |
8x-1030 Step Gp
| 12***98 | Plate; (Rh) | 2 |
| 12***99 | Plate; (Lh) | 2 |
| 19***79 | Step As | 2 |
Fuel System
7c-8993 Fastener Gp-Fuel Inj Pump
| 0S***14 | Bolt (.25" Diameter-.50" Long) | 3 |
| 2S***83 | Bolt (3.25" Long-Drilled Head) | 1 |
| 4F***57 | Screw,Cap,Hexagon H Shock Mount To Bracket | 8 |
1w-3597 Torque Control Gp
| 1P***52 | Insulator,Bushing Governor | 1 |
| 1W***97 | Torque Control Group | 1 |
| 2P***85 | Spacer (.635 mm Thk); (0.635-mm Thk) | 1 |
111-5162 Control Gp-Fuel Ratio
| 10***93 | Washer | 1 |
| 11***62 | Control Group-Fuel Ratio (Basic) | 1 |
| 11***63 | Tag-Identification | 1 |
8w-4742 Control Gp-Governor
| 00***08 | Setscrew-Socket; (3/8-16x0.5-In) | 1 |
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 0V***96 | Bolt 1.125 In. (2.86 cm) Long | 2 |
1w-2481 Cover Gp-Tachometer Drive
| 0S***15 | Bolt 19 mm (.75 In.) Long Return Air Console To Enclosed Rops | 2 |
| 1W***81 | Cover Group-Tachometer Drive; Tachometer Drive Cover Group | 1 |
| 4M***03 | Packing,Preformed Hourmeter Mtg | 1 |
6i-1370 Filter Gp-Primary Fuel
| 1L***69 | Ring-Retaining | 1 |
| 2H***29 | Ring - Retaining External | 1 |
| 2J***57 | Packing,Preformed Screw Assembly Part Of Kit P/N 5r***25 | 1 |
2w-3282 Filter Gp-Secondary Fuel
| 03***47 | Elbow-Filtered Fuel From Based Assembly | 1 |
| 1R***50 | Filter As-Fuel; (Advanced Efficiency)(Secondary) | 1 |
| 2W***82 | Filter Group-Secondary Fuel | 1 |
2w-6559 Governor Gp
| 03***16 | Bolt-Self Locking; (1/4unc X 3/4) | 3 |
| 0S***16 | Screw,Cap,Hexagon H Receptacle Mtg; Bolt Brackets To Firewall Assembly | 6 |
| 15***28 | Gasket-Governor | 1 |
2w-2410 Governor Gp
| 03***16 | Bolt-Self Locking; (1/4unc X 3/4) | 3 |
| 0S***16 | Screw,Cap,Hexagon H Receptacle Mtg; Bolt Brackets To Firewall Assembly | 6 |
| 15***28 | Gasket-Governor | 1 |
8w-6265 Lines Gp-Fuel
| 20***47 | Hose As | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 1 |
| 2T***43 | Hose As | 1 |
4p-9330 Lines Gp-Fuel Injection
| 10***53 | Line As-Fuel Injection; (Cyl No. 3) | 1 |
| 10***54 | Line As-Fuel Injection; (Cyl No. 4) | 1 |
| 1W***67 | Clamp As-Fuel Line (With Spacer) | 2 |
113-5341 Lines Gp-Fuel Injection
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 2 |
| 0S***91 | Screw,Cap,Hexagon Bearing Retainer; Part Of Kit P/N 1w***82 | 1 |
| 0T***55 | Bolt; (3/8-16x4.25-In)(Location S) | 1 |
4p-9331 Lines Gp-Fuel Injection
| 12***05 | Bracket Assem. | 1 |
| 1W***68 | Clamp-Fuel Line; (Non-Threaded)(Thru Hole) | 4 |
| 1W***69 | Clamp-Fuel Line; (Threaded)(Threaded) | 2 |
128-7984 Protection Gp-Fuel System
| 12***94 | Bolt-Tamperproof; (28.58mm) | 1 |
| 12***96 | Bolt-Tamperproof; (95.25mm) | 1 |
| 12***84 | Protection Group-Fuel System | 1 |
4p-9827 Pump Gp-Fuel Injection
| 1W***87 | Valve As-Check; (Fuel Injection Pump) | 1 |
| 4P***27 | Pump Group-Fuel Injection | 1 |
| 4P***30 | Plunger & Barrel Assem. | 1 |
111-3769 Pump Gp-Fuel Injection
| 0S***15 | Bolt 19 mm (.75 In.) Long Return Air Console To Enclosed Rops | 4 |
| 11***69 | Pump Group-Fuel Injection | 1 |
| 11***70 | Camshaft Group | 1 |
4n-3287 Pump Gp-Fuel Priming
| 0S***16 | Screw,Cap,Hexagon H Receptacle Mtg; Bolt Brackets To Firewall Assembly | 1 |
| 10***08 | Pump As; (Fuel Priming) | 1 |
| 1P***36 | Gasket; (Fuel Priming Pump)(Fuel Priming Pump) | 1 |
1w-1695 Pump Gp-Fuel Transfer
| 0S***15 | Bolt 19 mm (.75 In.) Long Return Air Console To Enclosed Rops | 2 |
| 1W***69 | Piston | 1 |
| 1W***95 | Pump Group-Fuel Transfer | 1 |
2w-4160 Pump & Mtg Gp-Fuel Transfer
| 1W***95 | Pump Group-Fuel Transfer | 1 |
| 2W***60 | Pump Group-Fuel Transfer & Mtg; Fuel Transfer Pump And Mounting Group | 1 |
| 4B***65 | Screw,Cap,Hexagon Fuel Injection Pump | 1 |
113-5342 Pump Gp-Gov & Fuel Inj
| 03***79 | Seal-O-Ring (Id=10.82mm) | 1 |
| 11***69 | Pump Group-Fuel Injection | 1 |
| 11***62 | Control Group-Fuel Ratio (Basic) | 1 |
7c-8992 Seal Gp-Pump
| 03***79 | Seal-O-Ring (Id=10.82mm) | 1 |
| 14***77 | Gasket | 1 |
| 15***26 | Gasket | 1 |
169-3675 Tank Gp-Fuel
| 14***60 | Tank As-Fuel | 1 |
| 15***49 | Sender As-Fuel Level | 1 |
| 15***52 | Kit-Dial Sensor; (Includes Sensor As & Screws) | 1 |
126-6222 Tank Gp-Fuel
| 00***86 | Connector-Hose (1/4-18nptf Thd) | 1 |
| 12***22 | Tank Group-Fuel | 1 |
| 12***06 | Stud | 8 |
106-4896 Tank Gp-Fuel
| 00***86 | Connector-Hose (1/4-18nptf Thd) | 1 |
| 10***96 | Tank Group-Fuel | 1 |
| 14***63 | Tank As-Fuel | 1 |
8w-6262 Tank Gp-Fuel
| 00***86 | Connector-Hose (1/4-18nptf Thd) | 1 |
| 14***65 | Tank As-Fuel | 1 |
| 15***48 | Sender As-Fuel Level | 1 |
129-3544 Tank Gp-Fuel
| 00***86 | Connector-Hose (1/4-18nptf Thd) | 1 |
| 12***06 | Stud | 6 |
| 12***71 | Hood As | 1 |
130-5447 Tank Gp-Fuel
| 00***86 | Connector-Hose (1/4-18nptf Thd) | 1 |
| 12***06 | Stud | 6 |
| 12***71 | Hood As | 1 |
Hydraulic System
9j-9865 Accumulator Gp-Hydraulic
| 1H***28 | Seal (3.73 In. Inside Diameter) | 2 |
| 2K***30 | Ring-Back-Up | 2 |
| 3D***24 | O-Ring - For Oil Drain & Level Plug (Items 3 & 7) | 1 |
162-7451 Accumulator & Mtg Gp-Hydraulic -Blade Cushion
| 16***49 | Clamp | 2 |
| 16***50 | Accumulator Group-Hydraulic; -Blade Cushion | 2 |
| 16***51 | Accumulator & Mtg Group-Hydraulic; -Blade Cushion | 1 |
8x-8099 Accumulator & Mtg Gp-Hydraulic
| 1F***48 | Nut 12.70 mm(.50 In.) Thread | 2 |
| 2M***79 | Stud-Taperlock; (3/8-16x0.177-In)(45mm) | 3 |
| 6G***92 | Clamp | 2 |
8x-9747 Accumulator Ar-Blade Cushion
| 16***51 | Accumulator & Mtg Group-Hydraulic; -Blade Cushion | 1 |
| 2A***69 | Wiring Group-Blade Cushion | 1 |
| 8X***33 | Lines Group-Accumulator | 1 |
179-9398 Accumulator Gp-Hydraulic -Uncharged
| 16***50 | Accumulator Group-Hydraulic; -Blade Cushion | 1 |
| 17***98 | Accumulator Group-Hydraulic; -Uncharged | 1 |
162-7450 Accumulator Gp-Hydraulic -Charged
| 11***10 | Protector-Gas Valve | 1 |
| 13***23 | Piston | 1 |
| 16***50 | Accumulator Group-Hydraulic; -Blade Cushion | 1 |
124-3774 Control Ar-Hydraulic
| 12***96 | Valve & Linkage Group; -5-Bank, Rh; 7-Bank, Lh | 1 |
| 12***74 | Control Ar-Hydraulic | 1 |
| 8X***42 | Lines Group-Ripper | 1 |
124-3776 Control Ar-Hydraulic -Ripper
| 12***90 | Valve & Linkage Group; -4-Bank, Rh; 5-Bank, Lh | 1 |
| 12***76 | Control Ar-Hydraulic; -Ripper | 1 |
| 8X***42 | Lines Group-Ripper | 1 |
124-3772 Control Ar-Hydraulic
| 12***99 | Valve & Linkage Group; -6-Bank, Rh; 7-Bank, Lh | 1 |
| 12***72 | Control Ar-Hydraulic | 1 |
| 8X***42 | Lines Group-Ripper | 1 |
124-3775 Control Ar-Hydraulic -Plow/Dozer-Ripper
| 12***97 | Valve & Linkage Group; -5-Bank, Rh, Lh | 1 |
| 12***75 | Control Ar-Hydraulic; -Plow/Dozer-Ripper | 1 |
| 8X***42 | Lines Group-Ripper | 1 |
8x-7565 Control Gp-Centershift Lock
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 8 |
| 4D***33 | Clip (Large) | 2 |
| 6V***97 | Seal (Later Machines And Field Installed) | 8 |
8w-2913 Cylinder & Mtg Gp-Scarifier
| 16***10 | Cylinder Group-Scarifier | 1 |
| 5P***28 | Capscrew; (Hex Hd) (1/2-13 Unc X 1.00, Gd 8 Z) | 4 |
| 6G***87 | Lock | 2 |
140-8129 Cylinder & Mtg Gp-Articulation
| 13***90 | Cylinder Group-Articulation; -Rh | 1 |
| 13***92 | Cylinder Group-Articulation; -Lh | 1 |
| 14***29 | Cylinder & Mtg Group-Articulation | 1 |
112-5361 Cylinder & Mtg Gp-Articulation
| 11***61 | Cylinder & Mtg Group-Articulation | 1 |
| 2K***20 | Washer | 12 |
| 6E***60 | Cylinder Group-Articulation; -Rh | 1 |
8x-1947 Cylinder & Mtg Gp-Blade Lift
| 13***29 | Cylinder Group-Lift; -Blade | 2 |
| 27***31 | Bolt; (M12x1.75x100-mm)(M12x1.75x100-mm) | 8 |
| 27***32 | Washer; (13.5x25.5x3-mm Thk) | 8 |
8x-1943 Cylinder & Mtg Gp-Blade Tip
| 2G***67 | Spacer | 2 |
| 3B***29 | Pin-Cotter | 1 |
| 5K***52 | Bolt-Locking; (3/8-16x3-In) | 1 |
8x-1944 Cylinder & Mtg Gp-Centershift
| 29***36 | Bolt; (7/8-9x3.5-In) | 4 |
| 29***39 | Washer-Hard; (24x41.5x6-mm Thk) | 4 |
| 2G***98 | Cap | 2 |
112-7463 Cylinder & Mtg Gp-Sideshift
| 11***75 | Cylinder Group-Sideshift | 1 |
| 11***62 | Bracket | 1 |
| 11***63 | Cylinder & Mtg Group-Sideshift | 1 |
8w-2290 Cylinder & Mtg Gp-Steering
| 13***41 | Cylinder Group-Steering; -Lh | 1 |
| 13***42 | Cylinder Group-Steering; -Rh | 1 |
| 13***36 | Tie Rod Group; (Steering) | 2 |
8w-2737 Cylinder & Mtg Gp-Wheel Lean
| 0S***92 | Bolt--Cover To Flywheel Housing | 1 |
| 12***42 | Cylinder Group-Wheel Lean | 1 |
| 2G***67 | Retainer | 1 |
9t-8784 Cylinder Gp-Articulation
| 15***05 | Head | 1 |
| 17***79 | Bolt-Hex Head; (M24x3.0x80mm) | 1 |
| 1H***39 | Packing,Preformed Cover Part Of Kit P/N 4j***80 | 1 |
137-6790 Cylinder Gp-Articulation -Rh
| 13***90 | Cylinder Group-Articulation; -Rh | 1 |
| 13***93 | Cylinder As | 1 |
| 13***94 | Rod As | 1 |
6e-1560 Cylinder Gp-Articulation
| 16***90 | Seal As-Buffer | 1 |
| 16***00 | Seal-U-Cup | 1 |
| 16***52 | Seal-Wiper | 1 |
137-6792 Cylinder Gp-Articulation -Lh
| 13***91 | Cylinder As | 1 |
| 13***92 | Cylinder Group-Articulation; -Lh | 1 |
| 13***94 | Rod As | 1 |
6e-1549 Cylinder Gp-Blade Tip
| 00***63 | Ring | 1 |
| 2D***52 | Bearing | 2 |
| 4J***25 | Ring-Back-Up | 1 |
6e-1343 Cylinder Gp-Centershift
| 14***93 | Head | 1 |
| 16***95 | Seal As-Buffer | 1 |
| 16***04 | Seal-U-Cup | 1 |
131-7191 Cylinder Gp-Hydraulic
| 13***91 | Cylinder Group-Hydraulic; -Blade Tip | 1 |
| 13***94 | Cylinder As | 1 |
| 13***95 | Rod As | 1 |
132-4929 Cylinder Gp-Lift -Blade
| 12***93 | Rod As | 1 |
| 13***28 | Cylinder As | 1 |
| 13***29 | Cylinder Group-Lift; -Blade | 1 |
113-7754 Cylinder Gp-Ripper
| 11***54 | Cylinder Group-Ripper | 1 |
| 11***55 | Cylinder As | 1 |
| 11***56 | Rod As | 1 |
165-2510 Cylinder Gp-Scarifier
| 16***10 | Cylinder Group-Scarifier | 1 |
| 16***90 | Seal As-Buffer | 1 |
| 16***00 | Seal-U-Cup | 1 |
112-5575 Cylinder Gp-Sideshift
| 11***75 | Cylinder Group-Sideshift | 1 |
| 11***35 | Rod As | 1 |
| 15***80 | Washer-Hard; (26x44x22-mm Thk) | 1 |
9t-2395 Cylinder Gp-Steering -Lh
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 1N***99 | Plug-O-Ring; (Straight Thread) | 1 |
| 1U***98 | Seal Assem. | 1 |
130-9042 Cylinder Gp-Steering -Rh
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 13***42 | Cylinder Group-Steering; -Rh | 1 |
| 13***45 | Cylinder As; (Rh) | 1 |
9t-2393 Cylinder Gp-Steering -Rh
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 1N***99 | Plug-O-Ring; (Straight Thread) | 1 |
| 1U***98 | Seal Assem. | 1 |
130-9041 Cylinder Gp-Steering -Lh
| 00***39 | Bearing-Aligning; (Self Aligning) | 1 |
| 13***41 | Cylinder Group-Steering; -Lh | 1 |
| 13***44 | Cylinder As; (Lh) | 1 |
121-9242 Cylinder Gp-Wheel Lean
| 12***42 | Cylinder Group-Wheel Lean | 1 |
| 12***45 | Rod As | 1 |
| 12***76 | Cylinder As | 1 |
130-3535 Detent Gp-Control Valve
| 10***74 | Retainer | 1 |
| 12***87 | Piston | 1 |
| 12***88 | Retainer | 1 |
5t-0570 Drive Gp-Circle
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 4 |
| 10***96 | Motor Group-Gerotor; -Circle Drive | 1 |
| 1A***15 | Nut; (23/4x17/8-Thd) | 1 |
110-4656 Drive Gp-Circle
| 0S***85 | Bolt; 12.7 mm (1/2") Diameter X 38.1 mm (1 1/2") Length Generator To Engine | 4 |
| 10***96 | Motor Group-Gerotor; -Circle Drive | 1 |
| 10***28 | Bearing-Sleeve | 1 |
8x-9733 Lines Gp-Accumulator
| 10***06 | Hose As | 1 |
| 13***44 | Hose As | 1 |
| 13***46 | Hose As | 1 |
142-7378 Lines Gp-Centershift Lock
| 11***42 | Hose As | 1 |
| 14***73 | Hose As-Orfs | 1 |
| 14***75 | Hose As | 1 |
106-4787 Lines Gp-Hydraulic -Lh
| 10***87 | Lines Group-Hydraulic; -Lh | 1 |
| 10***43 | Hose As | 2 |
| 10***44 | Hose As | 2 |
110-2985 Lines Gp-Hydraulic -Rh
| 10***36 | Clip | 1 |
| 10***40 | Hose As | 1 |
| 10***41 | Hose As | 1 |
8x-6070 Lines Gp-Hydraulic -Scarifier
| 11***99 | Hose As | 1 |
| 11***00 | Hose As | 1 |
| 14***18 | Connector As | 2 |
114-0025 Lines Gp-Hydraulic -Bulldozer Lift, Plow, Lh
| 11***25 | Lines Group-Hydraulic; -Bulldozer Lift, Plow, Lh | 1 |
| 11***27 | Hose As | 2 |
| 14***18 | Connector As | 1 |
8w-6251 Lines Gp-Pump
| 10***86 | Tube | 1 |
| 11***11 | Hose As | 1 |
| 13***06 | Tube As | 1 |
109-7027 Lines Gp-Ripper
| 10***27 | Lines Group-Ripper | 1 |
| 10***72 | Hose As | 1 |
| 1S***18 | Clip (Large) | 1 |
8x-9142 Lines Gp-Ripper
| 11***37 | Hose As | 2 |
| 1S***94 | Clip-R.H. Side Engine Support | 2 |
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
133-6109 Lines Gp-Secondary Steering
| 10***12 | Hose As | 1 |
| 10***13 | Hose As | 1 |
| 13***09 | Lines Group-Secondary Steering | 1 |
8x-1969 Lines Gp-Steering
| 10***02 | Hose As | 3 |
| 10***03 | Hose As | 1 |
| 10***08 | Hose As | 1 |
142-8205 Lock Gp-Centershift
| 11***40 | Cylinder | 1 |
| 11***41 | Pin | 1 |
| 14***87 | Cap | 1 |
8x-1945 Lock Gp-Centershift
| 11***67 | Cap | 1 |
| 11***40 | Cylinder | 1 |
| 11***41 | Pin | 1 |
7t-6517 Manifold Gp-Control -Accumulator
| 14***58 | Valve Group-Solenoid; -Blade Lock | 1 |
| 7T***17 | Manifold Group-Control; (Solenoid) | 1 |
| 8C***62 | Manifold | 1 |
105-3196 Motor Gp-Gerotor
| 10***96 | Motor Group-Gerotor; -Circle Drive | 1 |
| 6Y***32 | Bearing-Thrust | 1 |
| 6Y***33 | Ring-Thrust | 2 |
123-8867 Pump & Motor Gp-Sec Steering
| 11***15 | Motor Group-Electric; -Engine Prelubrication-Sec Steering, Brake Release | 1 |
| 12***66 | Pump | 1 |
| 12***67 | Pump & Motor Group-Sec Steering | 1 |
8x-2378 Pump & Mtg Gp-Piston
| 11***59 | Mounting As | 4 |
| 1A***22 | Bolt-Generator To Flywheel Housing | 4 |
| 5R***87 | Plate | 4 |
8x-9751 Pump & Mtg Gp-Secondary Steer
| 12***67 | Pump & Motor Group-Sec Steering | 1 |
| 8X***51 | Pump & Mtg Group-Secondary Steer | 1 |
102-1501 Pump Gp-Metering -Hmu
| 10***01 | Pump Group-Metering; -Steering | 1 |
| 11***60 | Kit-Seal; (Hmu Steering) | 1 |
| 3G***91 | Race | 2 |
6e-3137 Pump Gp-Piston
| 00***12 | Cup-Roller Bearing | 1 |
| 00***63 | Ring | 1 |
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
100-3412 Rotating Gp-Pump
| 10***10 | Plate | 2 |
| 10***11 | Plate-Spacer | 2 |
| 10***12 | Rotating Group-Pump; -Implement, Steering | 1 |
7d-9600 Shaft Gp-Pump Drive
| 0L***78 | Bolt 44.45 mm(1.75 In.) Long | 4 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 4 |
| 1B***37 | Key-Woodruff | 1 |
100-3416 Swashplate Gp -Variable
| 10***16 | Swashplate Group; -Variable | 1 |
| 13***32 | Block-Stop | 2 |
| 8F***19 | Seal (4.47 Degrees I.D.) | 2 |
260-6502 Swivel Gp
| 17***07 | Seal | 2 |
| 17***08 | Rotor | 1 |
| 17***09 | Retainer | 1 |
9t-5604 Swivel Gp
| 2H***28 | Seal-Top Cover & Filter Group | 7 |
| 3H***07 | Seal-O-Ring; (21.82mm Id) | 4 |
| 4J***64 | Seal | 2 |
9t-7984 Tank & Filter Gp-Hydraulic
| 08***07 | Pin | 1 |
| 0L***51 | Bolt Starting Engine Fuel Tank Bracket To Diesel Intake Manifold | 2 |
| 0S***09 | Bolt (3/4") Filler Tube Assembly To Transfer Drive Case | 2 |
8x-2369 Tank & Mtg Gp-Hydraulic
| 1R***22 | Filter Element As-Oil; (Standard Efficiency)(Disposable) | 1 |
| 5P***75 | Washer-Hard; (10.2x22.5x3-mm Thk)(Shield To A/C) | 8 |
| 5P***24 | Bolt-Plt; (1/2unc X 2 1/4) | 2 |
5y-0769 Universal Joint Gp-Pump Drive
| 2Y***55 | Fitting | 3 |
| 5Y***66 | Yoke As-Slip | 1 |
| 5Y***67 | Bearing-Spider | 2 |
112-5495 Universal Joint Gp-Pump Drive
| 02***87 | Fitting-Grease; (Universal Joint) | 1 |
| 0L***78 | Bolt 44.45 mm(1.75 In.) Long | 8 |
| 11***95 | Universal Joint Group-Pump Drive; -Steering | 1 |
112-2240 Manifold Gp-Control
| 11***40 | Valve & Mounting Group; -Blade Cushion | 1 |
| 14***10 | Valve Group-Solenoid; -Axle Oil Cooler-Hydraulic Lockout | 1 |
| 8C***62 | Manifold | 1 |
121-4084 Valve & Linkage Gp -Bank 5-Rh-Bank 7-Lh
| 10***57 | Lever; (Plow, Bulldozer Angle) | 2 |
| 10***58 | Lever; (Plow & Bulldozer Lift) | 3 |
| 10***97 | Lever; (Plow, Bulldozer Angle) | 1 |
121-4095 Valve & Linkage Gp -Bank 4-Rh-Bank 5-Lh
| 10***57 | Lever; (Plow, Bulldozer Angle) | 2 |
| 10***58 | Lever; (Plow & Bulldozer Lift) | 1 |
| 10***19 | Plate As; (Rh) | 1 |
121-4098 Valve & Linkage Gp -Bank 6-Lh,Rh
| 10***57 | Lever; (Plow, Bulldozer Angle) | 2 |
| 10***58 | Lever; (Plow & Bulldozer Lift) | 2 |
| 10***97 | Lever; (Plow, Bulldozer Angle) | 2 |
121-4086 Valve & Linkage Gp -Bank 5 Lh-Rh
| 10***57 | Lever; (Plow, Bulldozer Angle) | 2 |
| 10***58 | Lever; (Plow & Bulldozer Lift) | 2 |
| 10***19 | Plate As; (Rh) | 1 |
121-4094 Valve & Linkage Gp -Bank 5-Rh-Bank 6-Lh
| 10***57 | Lever; (Plow, Bulldozer Angle) | 2 |
| 10***58 | Lever; (Plow & Bulldozer Lift) | 2 |
| 10***97 | Lever; (Plow, Bulldozer Angle) | 1 |
121-4083 Valve & Linkage Gp -Bank 4-Lh,Rh
| 10***57 | Lever; (Plow, Bulldozer Angle) | 1 |
| 10***58 | Lever; (Plow & Bulldozer Lift) | 1 |
| 10***19 | Plate As; (Rh) | 1 |
121-4099 Valve & Linkage Gp -Bank 6-Rh, Bank 7-Lh
| 10***57 | Lever; (Plow, Bulldozer Angle) | 2 |
| 10***58 | Lever; (Plow & Bulldozer Lift) | 3 |
| 10***97 | Lever; (Plow, Bulldozer Angle) | 2 |
121-4090 Valve & Linkage Gp -4-Bank, Rh; 5-Bank, Lh
| 10***57 | Lever; (Plow, Bulldozer Angle) | 2 |
| 10***58 | Lever; (Plow & Bulldozer Lift) | 1 |
| 10***19 | Plate As; (Rh) | 1 |
121-4096 Valve & Linkage Gp -Bank 5-Rh, Bank 7-Lh
| 10***57 | Lever; (Plow, Bulldozer Angle) | 2 |
| 10***58 | Lever; (Plow & Bulldozer Lift) | 3 |
| 10***97 | Lever; (Plow, Bulldozer Angle) | 1 |
121-4097 Valve & Linkage Gp -Bank 5-Lh,Rh
| 10***57 | Lever; (Plow, Bulldozer Angle) | 2 |
| 10***58 | Lever; (Plow & Bulldozer Lift) | 2 |
| 10***19 | Plate As; (Rh) | 1 |
124-3771 Valve & Linkage Gp -Bank 4-Lh-Bank 5-Rh
| 10***57 | Lever; (Plow, Bulldozer Angle) | 1 |
| 10***58 | Lever; (Plow & Bulldozer Lift) | 2 |
| 10***19 | Plate As; (Rh) | 1 |
130-3116 Valve Gp-Bank 4 -Rh
| 10***09 | Seal-Integral, . Gear; Ring | 5 |
| 10***46 | Cover | 1 |
| 10***38 | Manifold | 1 |
130-3117 Valve Gp-Bank 4 -Lh
| 10***09 | Seal-Integral, . Gear; Ring | 5 |
| 10***46 | Cover | 1 |
| 10***85 | Manifold | 1 |
130-3123 Valve Gp-Bank 5 -Rh
| 10***09 | Seal-Integral, . Gear; Ring | 6 |
| 10***46 | Cover | 1 |
| 10***38 | Manifold | 1 |
130-3119 Valve Gp-Bank 5 -Lh
| 10***09 | Seal-Integral, . Gear; Ring | 6 |
| 10***46 | Cover | 1 |
| 10***85 | Manifold | 1 |
130-3118 Valve Gp-Bank 5 -Lh
| 10***09 | Seal-Integral, . Gear; Ring | 6 |
| 10***46 | Cover | 1 |
| 10***85 | Manifold | 1 |
130-3121 Valve Gp-Bank 6 -Lh
| 10***09 | Seal-Integral, . Gear; Ring | 7 |
| 10***46 | Cover | 1 |
| 10***85 | Manifold | 1 |
130-3124 Valve Gp-Bank 6 -Rh
| 10***09 | Seal-Integral, . Gear; Ring | 7 |
| 10***46 | Cover | 1 |
| 10***38 | Manifold | 1 |
130-3122 Valve Gp-Bank 7 -Lh
| 10***09 | Seal-Integral, . Gear; Ring | 8 |
| 10***46 | Cover | 1 |
| 10***85 | Manifold | 1 |
130-3120 Valve Gp-Bank 7 -Lh
| 10***09 | Seal-Integral, . Gear; Ring | 8 |
| 10***46 | Cover | 1 |
| 10***85 | Manifold | 1 |
9t-5957 Valve Gp-Combination
| 10***21 | Valve Group-Relief; -Direct Operated | 1 |
| 13***50 | Valve Group-Purge; -Hydraulic Steering-Implement Signal | 1 |
| 14***08 | Plug As. | 3 |
6e-2866 Valve Gp-Combination
| 10***44 | Valve | 1 |
| 3P***98 | Plug-Orifice | 1 |
| 6E***66 | Valve Group-Combination | 1 |
6e-3035 Valve Gp-Control -Circle Drive
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
| 10***78 | Cover | 1 |
150-6649 Valve Gp-Control -Wing Lift
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
| 10***78 | Cover | 1 |
130-3111 Valve Gp-Control -Dozer Lift, Plow
| 10***70 | Lever As; (Blade Lift) | 1 |
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
137-8104 Valve Gp-Control -Wing Tilt
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
| 10***78 | Cover | 1 |
130-3110 Valve Gp-Control -Blade Lift
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
| 10***82 | Lever As; (Blade Lift) | 1 |
119-9549 Valve Gp-Control -Scarifier
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
| 10***78 | Cover | 1 |
119-9547 Valve Gp-Control -Plow/Dozer Angle
| 10***70 | Lever As; (Blade Lift) | 1 |
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
107-0552 Valve Gp-Control -Wing Tilt
| 10***29 | Plug | 1 |
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
128-8647 Valve Gp-Control -Blade Lift
| 10***70 | Lever As; (Blade Lift) | 1 |
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
115-1007 Valve Gp-Control -Bulldozer Angle, Plow, Rh
| 10***70 | Lever As; (Blade Lift) | 1 |
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
6e-3036 Valve Gp-Control -Sideshift
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
| 10***78 | Cover | 1 |
6e-3030 Valve Gp-Control -Wheel Lean
| 10***54 | Stem | 1 |
| 10***70 | Lever As; (Blade Lift) | 1 |
| 10***71 | Lever; (Blade Lift) | 1 |
6e-3034 Valve Gp-Control -Blade Tip
| 10***55 | Stem | 1 |
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
137-8106 Valve Gp-Control -Wing Lift
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
| 10***78 | Cover | 1 |
6e-3028 Valve Gp-Control -Articulation
| 10***48 | Stem | 1 |
| 10***70 | Lever As; (Blade Lift) | 1 |
| 10***71 | Lever; (Blade Lift) | 1 |
119-9550 Valve Gp-Control -Ripper
| 10***52 | Stem | 1 |
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
6e-3029 Valve Gp-Control -Centershift
| 10***49 | Stem | 1 |
| 10***70 | Lever As; (Blade Lift) | 1 |
| 10***71 | Lever; (Blade Lift) | 1 |
119-9553 Valve Gp-Control -Wing Lift
| 10***71 | Lever; (Blade Lift) | 1 |
| 10***73 | Retainer | 4 |
| 10***78 | Cover | 1 |
104-3122 Valve Gp-Pump Control -Pressure, Flow Compensator
| 03***27 | Seal-O-Ring; (19.18mm Id) | 1 |
| 03***36 | Seal-O-Ring | 1 |
| 10***22 | Valve Group-Pump Control; -Pressure, Flow Compensator-Implement, Steering | 1 |
131-8350 Valve Gp-Purge
| 10***44 | Valve | 1 |
| 13***70 | Sleeve | 1 |
| 13***50 | Valve Group-Purge; -Hydraulic Steering-Implement Signal | 1 |
100-6021 Valve Gp-Relief
| 10***21 | Valve Group-Relief; -Direct Operated | 1 |
| 10***57 | Valve | 1 |
| 12***61 | Housing | 1 |
101-4148 Valve Gp-Relief
| 10***48 | Valve Group-Relief; -Blade Tip, Ripper, Sideshift | 1 |
| 3G***26 | Nut; (3/8-40-Thd) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
139-8476 Valve Gp-Relief
| 13***77 | Valve | 1 |
| 13***76 | Valve Group-Relief | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
6e-4703 Valve Gp-Relief
| 3G***26 | Nut; (3/8-40-Thd) | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
| 4D***97 | Seal 15.6 mm(.614 In.) I.D. | 1 |
139-8472 Valve Gp-Relief
| 11***35 | Retainer As | 1 |
| 13***77 | Valve | 1 |
| 13***72 | Valve Group-Relief; -Ripper | 1 |
116-0374 Valve Gp-Relief
| 11***74 | Valve Group-Relief; -Direct Operated | 1 |
| 13***77 | Valve | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
139-8477 Valve Gp-Relief
| 13***77 | Valve | 1 |
| 13***77 | Valve Group-Relief | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
106-7389 Valve Gp-Relief
| 10***89 | Valve Group-Relief; -Blade Tip, Ripper, Sideshift | 1 |
| 11***54 | Valve | 1 |
| 11***35 | Retainer As | 1 |
4t-4935 Valve Gp-Relief
| 3K***60 | Seal Pilot Manifold On; Seal To Boom Check Valve Drain | 2 |
| 4T***35 | Valve Group-Relief; -Main-Implement Inlet Manifiold | 1 |
| 4T***42 | Spring | 1 |
116-0375 Valve Gp-Relief
| 11***75 | Valve Group-Relief; -Direct Operated | 1 |
| 13***77 | Valve | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
116-0373 Valve Gp-Relief
| 11***73 | Valve Group-Relief; -Direct Operated | 1 |
| 13***77 | Valve | 1 |
| 3J***07 | Seal Valve Assembly To; Seal- Tube Assembly To Logic Valve | 1 |
101-4147 Valve Gp-Relief
| 10***47 | Valve Group-Relief; -Blade Tip-Ripper-Sideshift | 1 |
| 10***48 | Valve Group-Relief; -Blade Tip, Ripper, Sideshift | 1 |
| 10***89 | Valve Group-Relief; -Blade Tip, Ripper, Sideshift | 1 |
4t-1860 Valve Gp-Shuttle
| 14***03 | Seal-O-Ring | 1 |
| 14***04 | Ring-Backup | 2 |
| 14***05 | Ring-Backup | 2 |
8t-8808 Valve Gp-Solenoid
| 03***21 | Ring-Back-Up | 1 |
| 1H***23 | Packing,Preformed Part Of Kit P/N 5r***25 | 1 |
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
149-2610 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 11***43 | Locknut; (5/16-18-Thd) | 2 |
| 14***87 | Coil As; (24-Volt) | 1 |
149-2658 Valve Gp-Solenoid
| 11***43 | Locknut; (5/16-18-Thd) | 1 |
| 14***11 | Cartridge Assem. | 1 |
| 14***58 | Valve Group-Solenoid; -Blade Lock | 1 |
152-8346 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***36 | Kit-Seal; (Solenoid Valve) | 1 |
| 11***43 | Locknut; (5/16-18-Thd) | 1 |
152-8351 Valve Gp-Solenoid
| 10***36 | Kit-Seal; (Solenoid Valve) | 1 |
| 11***43 | Locknut; (5/16-18-Thd) | 1 |
| 15***51 | Valve Group-Solenoid | 1 |
Implements
112-7486 Circle Gp
| 10***39 | Spacer; (18.85x26.67x78-mm Thk)(3.91mm Thk) | 8 |
| 10***55 | Bearing-Sleeve | 1 |
| 10***80 | Bracket As | 4 |
153-9360 Circle Gp
| 13***40 | Brace As | 1 |
| 14***43 | Plate; (Lh) | 1 |
| 14***44 | Plate; (Rh) | 1 |
112-7485 Circle Gp
| 11***85 | Circle Group | 1 |
| 12***78 | Brace | 1 |
| 12***80 | Beam-Blade | 1 |
8x-1960 Drawbar Gp
| 12***07 | Plate | 2 |
| 12***54 | Strip-Wear | 11 |
| 15***83 | Shim; (0.12-mm Thk) | 1 |
8x-2349 Plate Gp-Push
| 11***52 | Plate As | 1 |
| 11***53 | Plate | 1 |
| 11***55 | Bracket As | 1 |
Lubrication System
147-3092 Base Gp-Oil Filter
| 0S***88 | Bolt,Machine; Hose Assembly Mounting,Hose Assembly To Transmission,And To Torque Converter | 8 |
| 13***75 | Cover-Filter Base | 1 |
| 14***82 | Cover-Filter Base | 1 |
4p-7096 Base Gp-Oil Filter
| 03***51 | Elbow )-Inlet Port To Valve Group | 1 |
| 1B***90 | Bolt; (5/16-18x1.375-In)(Rh Front Cover) | 2 |
| 1B***75 | Bolt (" " " ); Bolt ( " " " ) | 1 |
8n-4457 Base Gp-Oil Filter
| 0S***18 | Bolt; (5/16-18x1-In)(Hydraulic Pump) | 2 |
| 1B***90 | Bolt; (5/16-18x1.375-In)(Rh Front Cover) | 2 |
| 1P***67 | Plunger; (Engine Oil Cooler Relief Valve) | 2 |
1p-4244 Breather Gp -Crankcase
| 1P***44 | Breather Group | 1 |
| 2W***62 | Breather As-Crankcase; (Engine) | 1 |
| 3H***43 | Bolt,Machine Breather Assembly To Cover | 1 |
2p-6855 Filler Gp-Engine Oil
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 2 |
| 2A***11 | Washer; (5.5x12.3x0.8-mm Thk) | 1 |
| 2P***19 | Pipe-Oil Filler | 1 |
147-3091 Filter Gp-Engine Oil
| 03***50 | Elbow (Check Valve Drain Tube) | 1 |
| 14***83 | Hose As | 1 |
| 14***84 | Hose As | 1 |
136-3171 Fumes Disposal Gp
| 13***71 | Fumes Disposal Group | 1 |
| 4L***59 | Bolt-Mirror To Open Rops | 1 |
| 5P***75 | Washer-Hard; (10.2x22.5x3-mm Thk)(Shield To A/C) | 1 |
8n-7254 Fumes Disposal Gp
| 1N***24 | Tube | 1 |
| 1N***02 | Hose 8.00 cm(3.15 In.) | 1 |
| 4L***37 | Hex Head Capscrew, 3/8 Nc X 1 1/2 In. (38 mm) | 1 |
2p-6493 Gauge Gp-Oil Level (Dipstick) -Engine
| 2P***47 | Filler Neck Oil Gage | 1 |
| 2P***97 | Tube A Oil Level Gage | 1 |
| 2P***93 | Gauge Group-Oil Level (Dipstick); -Engine | 1 |
2p-6105 Lines Gp-Engine Oil
| 0L***64 | Lock --To Reverse Driven Gear Splash Pan; -- To Reverse Driven Gear Splash Pan | 1 |
| 0L***70 | Bolt (2-1/4") Filler Tube Assembly To Transfer Drive Case | 1 |
| 0S***71 | Screw,Cap,Hexagon; Tube Assembly To Turbocharger And Elbow Mounting | 1 |
147-2071 Lines Gp-Turbocharger Oil
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
| 0S***08 | Bolt-Support To Starting Engine Timing Gear Housing | 1 |
7e-5683 Lines Gp-Turbocharger Oil
| 03***48 | Elbow (3/4" Tapped Pumps) - 2nd Type | 1 |
| 0L***43 | Bolt 63.5 mm (3/8" X 2 1/2" -Cover Assembly To Fender | 1 |
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 2 |
139-9609 Mounting Gp-Engine Oil Filter
| 13***09 | Mounting Group-Engine Oil Filter | 1 |
| 4L***37 | Hex Head Capscrew, 3/8 Nc X 1 1/2 In. (38 mm) | 3 |
| 8T***96 | Washer-Hard- Line From Pipe As. To Gear | 3 |
106-8958 Pump Gp-Engine Oil
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 1 |
| 10***58 | Pump Group-Engine Oil | 1 |
| 1P***46 | Washer-Hard; (10.2x35x6-mm Thk) | 1 |
6i-1346 Pump Gp-Engine Oil
| 0T***65 | Bolt--3/8" X 3 1/2"--Use As Required; Bolt 5t***56 Plate To Cover Gp 4n***72 | 3 |
| 1B***09 | Key,Woodruff No. 10 Oil Pump | 1 |
| 1F***06 | Dowel | 1 |
106-8957 Pump Gp-Engine Oil
| 0S***90 | Bolt; (3/8-16x2in)(Clip Thru Spacer To Bracket As) | 3 |
| 0S***19 | Bolt,Machine Gear Retaining Part Of Kit P/N 1w***46 | 1 |
| 10***57 | Pump Group-Engine Oil | 1 |
Machine Arrangement
112-4114 Chassis Ar
| 10***75 | Axle Group-Front | 1 |
| 10***84 | Hitch Group-Articulating | 1 |
| 10***96 | Tank Group-Fuel | 1 |
112-4100 General Ar
| 11***03 | Engine Ar | 1 |
| 11***00 | General Ar | 1 |
| 11***14 | Chassis Ar | 1 |
123-3923 Roading Ar
| 11***84 | Lighting Group-Signal | 1 |
| 12***41 | Control Group-Service Brake | 1 |
| 12***23 | Roading Ar | 1 |
Operator Station
142-0742 Accessory Gp-Cab -Low
| 11***11 | Socket-Auxiliary Power; (12-Volt)(Power Port) | 1 |
| 12***78 | Locknut; (M6x1-Thd) | 2 |
| 13***65 | Plate | 1 |
142-0747 Accessory Gp-Cab -High
| 11***11 | Socket-Auxiliary Power; (12-Volt)(Power Port) | 1 |
| 12***78 | Locknut; (M6x1-Thd) | 2 |
| 13***53 | Plate | 1 |
173-1028 Adjuster Gp-Seat
| 11***86 | Anchor | 1 |
| 11***92 | Rod | 1 |
| 13***38 | Washer-Plastic; (13x31.7x0.8-mm Thk) | 2 |
8w-7646 Air Conditioner & Mounting Gp
| 12***71 | Pad; (420mm X 356mm) | 1 |
| 12***72 | Pad; (1035mm X 150mm) | 1 |
| 8C***88 | Air Conditioner Group | 1 |
8w-7645 Air Conditioner Ar
| 7E***61 | Compressor Group-Refrigerant | 1 |
| 7I***15 | Duct Group-Cab Air; -Air Conditioner, Heater | 1 |
| 8W***33 | Condenser & Mtg Group-Refrigerant | 1 |
8c-9788 Air Conditioner Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 8 |
| 10***40 | Cover | 1 |
202-7668 Armrest Gp -Lh
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 1 |
| 16***13 | Bracket As | 1 |
| 1F***50 | Nut Rops Support | 1 |
113-4242 Armrest Gp -Lh
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 11***40 | Bracket As-Lh | 1 |
| 11***42 | Armrest Group; -Lh | 1 |
202-7666 Armrest Gp -Rh
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 1 |
| 16***14 | Bracket As | 1 |
| 1F***50 | Nut Rops Support | 1 |
113-4245 Armrest Gp -Rh
| 0S***94 | Bolt (1 In. Long 3/8 In. Dia.); Plate Assembly To Support Assembly | 1 |
| 11***43 | Bracket As-Rh | 1 |
| 11***45 | Armrest Group; -Rh | 1 |
101-1759 Compressor Gp-Refrigerant
| 10***59 | Compressor Group-Refrigerant | 1 |
| 13***97 | Compressor Group-Refrigerant | 1 |
7e-6461 Compressor Gp-Refrigerant
| 10***27 | Bracket | 2 |
| 3E***06 | Compressor Group-Refrigerant | 1 |
| 4L***37 | Hex Head Capscrew, 3/8 Nc X 1 1/2 In. (38 mm) | 6 |
3e-1906 Compressor Gp-Refrigerant
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 31***18 | Valve As-Pressure Relief; (Refrigerant Compressor) | 1 |
| 3E***06 | Compressor Group-Refrigerant | 1 |
134-3997 Compressor Gp-Refrigerant
| 13***97 | Compressor Group-Refrigerant | 1 |
| 3E***58 | Compressor Group-Refrigerant | 1 |
| 7T***32 | Plug Assem.; (3/8-24) | 1 |
8w-6333 Condenser & Mtg Gp-Refrigerant
| 10***20 | Spacer; (10.5x25x20-mm Thk) | 4 |
| 21***18 | Core As-Condenser | 1 |
| 5P***75 | Washer-Hard; (10.2x22.5x3-mm Thk)(Shield To A/C) | 4 |
8w-5595 Console Gp-Operator -Transmission Direction, Speed
| 10***81 | Gate As | 1 |
| 14***86 | Cover | 1 |
| 14***88 | Cover | 1 |
116-4211 Console Gp-Operator
| 03***35 | Bolt-Self Locking; 2.22cm(.875 In.) Lg | 1 |
| 03***66 | Rod | 1 |
| 03***94 | Pin | 1 |
129-8215 Control Gp-Clutch
| 12***73 | Bolt-12 Point Head; (3/8-16x1.25-In)(3/8-16thd) | 1 |
| 12***15 | Control Group-Clutch; -Inching Pedal | 1 |
| 13***85 | Adapter | 1 |
152-7903 Control Gp-Hydraulic Lockout
| 09***60 | Setscrew-Socket; (M6x1x6-mm) | 12 |
| 10***14 | Knob | 4 |
| 15***30 | Block | 4 |
7i-4718 Control Gp-Steering
| 09***00 | Steering Wheel | 1 |
| 10***01 | Pump Group-Metering; -Steering | 1 |
| 14***95 | Nut; (13/16-20-Thd) | 1 |
8x-4526 Door Gp-Cab -Low Profile
| 10***41 | Plate As | 1 |
| 10***49 | Latch As; (Lh) | 1 |
| 10***51 | Link-Tag-Lh | 1 |
8x-4525 Door Gp-Cab -Rh
| 10***41 | Plate As | 1 |
| 10***50 | Latch As-Rh | 1 |
| 10***52 | Link-Tag-Rh | 1 |
8x-4527 Door Gp-Cab
| 10***53 | Bumper-Conical | 4 |
| 10***13 | Plate As | 2 |
| 12***28 | Seal; (17.2-cm Each) | 0 |
8x-4317 Door Gp-Cab -High Profile-Rh
| 10***41 | Plate As | 1 |
| 10***50 | Latch As-Rh | 1 |
| 10***52 | Link-Tag-Rh | 1 |
8x-4318 Door Gp-Cab -High Profile-Lh
| 10***41 | Plate As | 1 |
| 10***49 | Latch As; (Lh) | 1 |
| 10***51 | Link-Tag-Lh | 1 |
8x-4413 Door Gp-Cab -High Profile
| 10***53 | Bumper-Conical | 4 |
| 10***13 | Plate As | 2 |
| 12***28 | Seal; (17.2-cm Each) | 0 |
8w-7653 Duct & Control Gp
| 13***95 | Panel As | 1 |
| 7K***01 | Nut-Speed; (44.5mm Oal) | 2 |
| 8S***66 | Pop-Rivet (.125 Dia.) | 4 |
7i-5015 Duct Gp-Cab Air -Air Conditioner, Heater
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 8 |
| 10***96 | Bracket As | 6 |
| 12***54 | Duct | 1 |
8y-5874 Extension Gp-Backrest -Cloth
| 8Y***74 | Extension Group-Backrest; Backrest Extension Group | 1 |
| 8Y***77 | Pan As-Extension | 1 |
| 8Y***43 | Cushion Kit; (Consists Of Fastener, Cushion Assem.) | 1 |
8x-2245 Fan Gp-Circulating -Front Defroster
| 3E***21 | Actuator-Rocker; (Defroster) | 1 |
| 3E***25 | Lamp; (24-Volt) | 1 |
| 3E***30 | Switch As; (Window Wiper) | 1 |
135-1978 Fan Gp-Circulating -Front Defroster
| 03***55 | Locknut; (5/16-18-Thd)(Marked X) | 1 |
| 13***78 | Fan Group-Circulating; -Front Defroster | 1 |
| 13***79 | Bracket | 1 |
9x-9657 Fan Gp-Circulating -Rear
| 1B***13 | Bolt,Machine Governor And Decelerator Control | 1 |
| 1M***30 | Nut And Lock Assem.; (No. 10-32) | 2 |
| 2D***35 | Locknut (Visor To Bracket) | 1 |
8x-2925 Filter Gp-Cab Air
| 11***55 | Spring-Filter | 4 |
| 13***92 | Retainer-Captive | 2 |
| 23***86 | Filter Element As-Cab Air; (Cab) | 1 |
8w-7651 Heater & Mtg Gp-Cab
| 12***71 | Pad; (420mm X 356mm) | 1 |
| 12***72 | Pad; (1035mm X 150mm) | 1 |
| 8C***87 | Heater Group-Cab | 1 |
102-7367 Heater Ar-Cab
| 10***67 | Heater Ar-Cab | 1 |
| 7I***15 | Duct Group-Cab Air; -Air Conditioner, Heater | 1 |
| 8W***51 | Heater & Mtg Group-Cab | 1 |
8c-9787 Heater Gp-Cab
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 8 |
| 10***40 | Cover | 1 |
8x-9440 Horn Gp-Air
| 00***84 | Spring-Horn | 4 |
| 00***85 | Brush-Horn | 4 |
| 09***71 | Seal-Horn Button | 1 |
5d-6998 Horn Gp-Air
| 15***87 | Cover | 2 |
| 2G***64 | Kit-Diaphragm; (Air Horn) | 2 |
| 4B***75 | Washer (1.75 In. Outside Diameter) | 1 |
9d-4049 Horn Gp-Air
| 2G***64 | Kit-Diaphragm; (Air Horn) | 2 |
| 4B***75 | Washer (1.75 In. Outside Diameter) | 1 |
| 5D***93 | Projector (Right Hand) | 1 |
113-5808 Housing Gp-Seat Suspension
| 09***78 | Pin-Spring | 1 |
| 10***24 | Kit-Indicator; (Weight Adjustment)(Suspension Seat) | 1 |
| 10***79 | Kit-Bumper; (Weight Adjustment)(Suspension Seat) | 1 |
145-1300 Installation Ar-Radio
| 13***32 | Installation Group-Radio | 1 |
| 14***97 | Converter Group-Electrical; -Radio | 1 |
| 14***00 | Installation Ar-Radio | 1 |
130-9432 Installation Gp-Radio
| 13***32 | Installation Group-Radio | 1 |
| 2A***84 | Bracket | 1 |
| 2G***67 | Washer; (10.5x60x3-mm Thk) | 1 |
143-7139 Instrument Ar
| 10***52 | Sensor Group-Speed | 1 |
| 14***37 | Instrument Group | 1 |
| 14***39 | Instrument Ar | 1 |
105-2772 Instrument Ar
| 10***72 | Instrument Ar; -Speedometer/Tach | 1 |
| 10***26 | Instrument Group | 1 |
| 10***52 | Sensor Group-Speed | 1 |
143-7137 Instrument Gp
| 10***96 | Film-Instruction; (Speedometer) | 1 |
| 11***68 | Tachometer As | 1 |
| 13***40 | Speedometer As-Electronic | 1 |
105-5126 Instrument Gp
| 10***26 | Instrument Group | 1 |
| 11***38 | Speedometer As | 1 |
| 11***68 | Tachometer As | 1 |
8w-5927 Insulation Gp-Weather
| 11***64 | Boot | 14 |
| 4M***81 | Capscrew; (Hex Hd 1/4-20x3/4) (Use W/Spacer 2) | 4 |
| 5P***75 | Washer-Hard; (10.2x22.5x3-mm Thk)(Shield To A/C) | 4 |
8x-2400 Liner Gp-Cab -Low Profile-Enclosed
| 10***55 | Cover-Speaker | 2 |
| 10***63 | Screw-Machine; (4-40x1-In) | 8 |
| 10***14 | Knob | 4 |
8x-2405 Liner Gp-Cab -Enclosed
| 10***55 | Cover-Speaker | 2 |
| 10***25 | Screw-Machine; (8-32x1-In) | 8 |
| 10***14 | Knob | 4 |
8w-6899 Lines Gp-Air Conditioner
| 08***91 | Bolt; (M10x1.5x55-mm) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***00 | Fitting As-Air Conditioner; (Quick Disconnect)(Refrigerant) | 2 |
8x-4558 Lines Gp-Heater
| 1L***79 | Elbow-Pipe; (3/8 In Pipe) | 1 |
| 4S***62 | Clip 25.4mm(1 In.)Width | 3 |
| 5D***26 | Clamp-Band; (9/16 To 1 1/16) | 4 |
6v-1970 Literature Gp
| 2Y***09 | Seal-Wire | 2 |
| 5P***00 | Key Total 2 Pieces Per Unit; (Literature Compartment) | 2 |
| 6V***70 | Literature Group; (Literature Compartment) | 1 |
8x-2795 Mirror Gp-Rear View -Inside
| 1P***78 | Cap | 2 |
| 2G***41 | Clamp | 2 |
| 2G***42 | Arm | 2 |
123-4358 Mirror Gp-Rear View
| 11***18 | Arm | 2 |
| 12***58 | Mirror Group-Rear View; -Exterior | 1 |
| 12***86 | Block | 4 |
140-8127 Mirror Gp-Rear View -Dual, Interior
| 14***18 | Bracket As | 2 |
| 14***27 | Mirror Group-Rear View; -Dual, Interior | 1 |
| 1F***50 | Nut Rops Support | 1 |
159-0241 Module Gp-Quad Gauge
| 11***86 | Track Group | 1 |
| 14***15 | Indicator As-Articulation | 1 |
| 15***40 | Indicator As-Fuel Level | 1 |
124-0384 Module Gp-Quad Gauge
| 11***86 | Track Group | 1 |
| 12***84 | Module Group-Quad Gauge | 1 |
| 12***95 | Indicator As-Articulation | 1 |
187-1051 Module Gp-Quad Gauge
| 11***86 | Track Group | 1 |
| 18***33 | Voltmeter Group; (Quad Gauge Module) | 1 |
| 18***34 | Indicator As-Articulation; (Articulation) | 1 |
149-5927 Module Gp-Quad Gauge
| 12***98 | Indicator As-Fuel Level | 1 |
| 12***15 | Voltmeter Group; (Instrument Panel) | 1 |
| 14***15 | Indicator As-Articulation | 1 |
2a-6985 Mounting Gp-Rops
| 03***35 | Bolt-Self Locking; 2.22cm(.875 In.) Lg | 2 |
| 10***71 | Pin As | 2 |
| 10***53 | Mounting | 4 |
108-8421 Pan Gp-Backrest -Lumbar
| 10***21 | Pan Group-Backrest; -Seat Back | 1 |
| 10***23 | Shaft As-Lumbar | 1 |
| 10***24 | Pan-Lumbar | 1 |
301-4173 Pan Gp-Backrest
| 13***43 | Plate As-Lumbar | 1 |
| 16***83 | Knob-Lumbar | 1 |
| 25***28 | Plug | 3 |
113-5810 Pan Gp-Seat
| 00***81 | Ring-Retaining | 2 |
| 11***09 | Pan As-Seat | 1 |
| 11***10 | Pan Group-Seat | 1 |
8x-2385 Panel Gp-Cab -High Profile
| 10***72 | Glass; (Rear)(High Profile) | 1 |
| 11***06 | Glass; (Side) | 2 |
| 14***09 | Glass; (Lower Front) | 2 |
8x-2375 Panel Gp-Cab -Low Profile
| 10***81 | Glass; (Low Profile/Rear) | 1 |
| 11***57 | Glass; (Side) | 2 |
| 14***09 | Glass; (Lower Front) | 2 |
112-5944 Panel Gp-Instrument
| 10***91 | Screw; (Flat Head) (No.6-20x0.5in) | 12 |
| 11***44 | Panel Group-Instrument | 1 |
| 11***15 | Gasket | 1 |
210-2270 Recliner Gp-Seat
| 03***14 | Bolt-Self Locking; (1/4unc X 1/2) | 1 |
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 1 |
| 17***90 | Spring | 1 |
138-1007 Rops Ar
| 13***07 | Rops Ar | 1 |
| 13***08 | Rops Group | 1 |
| 15***59 | Film-Instruction; (Do Not Drill, Weld Rops) | 2 |
138-1005 Rops Ar
| 13***05 | Rops Ar | 1 |
| 13***06 | Rops Group; -Low Profile | 1 |
| 8W***27 | Insulation Group-Weather | 1 |
118-2556 Rops Gp -Enclosed, Low Profile
| 10***04 | Plate | 1 |
| 11***56 | Rops Group; -Enclosed, Low Profile | 1 |
| 13***26 | Block | 2 |
117-3486 Rops Gp -Enclosed, High Profile
| 11***86 | Rops Group; -Enclosed, High Profile | 1 |
| 15***12 | Plate-Warning; (Ops Certification, Read Omm) | 1 |
| 18***56 | Plate Group-Certification | 1 |
138-1008 Rops Gp
| 11***40 | Wiring Group-Cab | 1 |
| 11***86 | Rops Group; -Enclosed, High Profile | 1 |
| 13***08 | Rops Group | 1 |
138-1006 Rops Gp -Low Profile
| 11***40 | Wiring Group-Cab | 1 |
| 11***56 | Rops Group; -Enclosed, Low Profile | 1 |
| 13***06 | Rops Group; -Low Profile | 1 |
139-4612 Screen Gp-Sun -Rear
| 13***03 | Screen Group-Sun | 1 |
| 13***05 | Plate As | 1 |
| 13***12 | Screen Group-Sun; -Rear | 1 |
8y-3792 Seat Belt Gp -Retractable
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
| 8T***60 | Washer-Hard (For Use With 7/16 In Bolts) | 1 |
| 8Y***92 | Seat Belt Group; -Retractable-Operator | 1 |
122-4617 Seat Belt Gp -Retractable
| 12***17 | Seat Belt Group; -Retractable-Operator | 1 |
| 1A***50 | Bolt (7/16-20x1.75in); (7/16-20x1.75-In) | 1 |
| 4D***32 | Locknut (7/16-20 Thd) | 1 |
156-1148 Seat Belt Gp
| 15***48 | Seat Belt Group; -Retractable-Operator | 1 |
| 1A***50 | Bolt (7/16-20x1.75in); (7/16-20x1.75-In) | 1 |
| 1L***80 | Bolt; (7/16-20x1.5-In) | 1 |
222-0345 Seat Belt Gp -Retractable
| 22***45 | Seat Belt Group; -Retractable | 1 |
301-4174 Seat Gp -Cloth
| 09***43 | Pin-Cotter | 2 |
| 14***88 | Locknut-Flange; (3/8-16-Thd) | 8 |
| 16***25 | Cushion As | 1 |
114-1183 Seat Gp -Cloth, Lumbar
| 09***78 | Pin-Spring | 1 |
| 09***14 | Pin, Clevis | 1 |
| 10***21 | Pan Group-Backrest; -Seat Back | 1 |
175-1504 Seat Gp -Cloth
| 0T***44 | Bolt (1.25" Long) | 1 |
| 17***84 | Extension Group-Backrest; (Cloth) | 1 |
| 17***04 | Seat Group; -Cloth | 1 |
112-9104 Seat Gp-Suspension -Cloth
| 11***04 | Seat Group-Suspension; -Cloth | 1 |
| 11***42 | Armrest Group; -Lh | 1 |
| 11***45 | Armrest Group; -Rh | 1 |
154-5732 Seat Gp-Suspension -Cloth
| 15***32 | Seat Group-Suspension; -Cloth | 1 |
| 15***58 | Seat Group-Suspension; -Cloth, Lumbar | 1 |
| 15***59 | Suspension Group-Seat; -Air | 1 |
200-3814 Seat Gp-Suspension -Cloth
| 17***87 | Setscrew; (1/4-20-Thd) | 4 |
| 17***35 | Block Kit; (Includes Bolt, Washers, Blocks And Setscrews) | 1 |
| 17***04 | Seat Group; -Cloth | 1 |
156-7778 Seat Gp-Suspension -Cloth, Lumbar
| 09***81 | Spacer; (10.5x20x10.0mm Thk) | 1 |
| 15***32 | Seat Group-Suspension; -Cloth | 1 |
| 15***78 | Seat Group-Suspension; -Cloth, Lumbar | 1 |
155-5958 Seat Gp-Suspension -Cloth, Lumbar
| 11***42 | Armrest Group; -Lh | 1 |
| 11***45 | Armrest Group; -Rh | 1 |
| 11***83 | Seat Group; -Cloth, Lumbar | 1 |
8y-4194 Seat Gp-Suspension
| 11***04 | Seat Group-Suspension; -Cloth | 1 |
| 8Y***94 | Seat Group-Suspension; -Cloth | 1 |
| 9X***41 | Screw-Truss Head (M10x1.50x20mm); (Truss Head) (M10x1.5x20mm) | 6 |
8w-6318 Support Gp-Seat
| 10***40 | Cover | 1 |
| 11***51 | Plate | 1 |
| 12***18 | Cover | 1 |
155-5959 Suspension Gp-Seat -Air
| 10***17 | Bumper | 4 |
| 12***57 | Shaft | 2 |
| 12***28 | Kit-Roller; (Incls Parts Marked S) | 1 |
113-5800 Suspension Gp-Seat
| 10***03 | Fastener | 20 |
| 10***94 | Kit-Tether Belt; (Suspension Seat)(Seat Suspension) | 1 |
| 10***95 | Kit-Suspension Roller; (Suspension Seat)(Seat Suspension) | 1 |
8x-2650 Valve Gp-Air Control
| 12***21 | Bolt | 3 |
| 2D***06 | Pin | 1 |
| 2G***85 | Kit-Air Control Valve; (Service Brake) | 1 |
8x-9680 Washer Gp-Window -Rear
| 14***95 | Hose; (650-cm Each) | 0 |
| 3V***16 | Nozzle As; (Rear) | 1 |
| 4D***88 | Clip-(Slot To Fit Fastener M10 Or 3/8) | 1 |
8x-9675 Washer Gp-Window -Front
| 10***45 | Cover | 1 |
| 10***65 | Pad; (Round) | 1 |
| 14***95 | Hose; (650-cm Each) | 0 |
150-5107 Window Gp-Cab -Lh
| 12***08 | Spacer; (10.31x17.45x50.8-mm Thk) | 1 |
| 12***09 | Plate | 1 |
| 12***10 | Plate | 1 |
150-5106 Window Gp-Cab -Rh
| 12***08 | Spacer; (10.31x17.45x50.8-mm Thk) | 1 |
| 12***09 | Plate | 1 |
| 12***10 | Plate | 1 |
125-8846 Window Gp-Cab -Rh
| 12***46 | Window Group-Cab; -Rh | 1 |
| 12***08 | Spacer; (10.31x17.45x50.8-mm Thk) | 1 |
| 12***09 | Plate | 1 |
134-8233 Window Gp-Cab -Side Sliding-Low Profile
| 10***58 | Nut; (10x32-mm) | 2 |
| 10***46 | Stop-Slide | 2 |
| 13***33 | Window Group-Cab; -Side Sliding-Low Profile | 1 |
125-8847 Window Gp-Cab -Lh
| 12***47 | Window Group-Cab; -Lh | 1 |
| 12***08 | Spacer; (10.31x17.45x50.8-mm Thk) | 1 |
| 12***09 | Plate | 1 |
139-6128 Window Gp-Cab -Side Sliding-Low Profile
| 13***33 | Window Group-Cab; -Side Sliding-Low Profile | 2 |
| 13***28 | Window Group-Cab; -Side Sliding-Low Profile | 1 |
134-8232 Window Gp-Cab -Side Sliding-High Profile
| 10***58 | Nut; (10x32-mm) | 2 |
| 10***46 | Stop-Slide | 2 |
| 13***32 | Window Group-Cab; -Side Sliding-High Profile | 1 |
139-6129 Window Gp-Cab -Side Sliding High Profile
| 13***32 | Window Group-Cab; -Side Sliding-High Profile | 2 |
| 13***29 | Window Group-Cab; -Side Sliding High Profile | 1 |
126-0961 Window Gp-Vent -Cab
| 12***46 | Window Group-Cab; -Rh | 1 |
| 12***47 | Window Group-Cab; -Lh | 1 |
| 12***61 | Window Group-Vent; -Vent | 1 |
155-7451 Wiper Ar-Window -Rear
| 15***51 | Wiper Ar-Window; -Rear | 1 |
| 8X***11 | Wiper Group-Window; -Rear-High Profile | 1 |
| 8X***80 | Washer Group-Window; -Rear | 1 |
155-7450 Wiper Ar-Window -Rear
| 15***50 | Wiper Ar-Window; -Rear | 1 |
| 8X***10 | Wiper Group-Window; -Rear | 1 |
| 8X***80 | Washer Group-Window; -Rear | 1 |
8x-2815 Wiper Gp-Window -Front
| 10***44 | Motor Group-Window Wiper; (24-Volt)(24-Volt) | 2 |
| 12***54 | Arm-Window Wiper; (Front, Lower) | 2 |
| 12***55 | Blade As-Wiper; (335-mm)(High Profile Front Lower) | 2 |
8x-2810 Wiper Gp-Window -Front
| 10***44 | Motor Group-Window Wiper; (24-Volt)(24-Volt) | 2 |
| 12***54 | Arm-Window Wiper; (Front, Lower) | 2 |
| 12***55 | Blade As-Wiper; (335-mm)(High Profile Front Lower) | 2 |
8x-2910 Wiper Gp-Window -Rear
| 01***16 | Setscrew; (8-32x0.5-In) | 1 |
| 2H***20 | Lockwasher (11.38mm Id) | 1 |
| 3K***82 | Fuse; (10-Ampere) | 1 |
8x-2911 Wiper Gp-Window -Rear-High Profile
| 01***16 | Setscrew; (8-32x0.5-In) | 1 |
| 2H***20 | Lockwasher (11.38mm Id) | 1 |
| 3K***82 | Fuse; (10-Ampere) | 1 |
3t-7068 Motor Gp-Window Wiper
| 3C***84 | Screw-Machine; (M5x0.8 Bg Thd) | 4 |
| 3T***59 | Bracket | 1 |
| 3T***68 | Wiper Group-Windshield; -Rear | 1 |
Power Train
148-3076 Autoshift Ar
| 14***74 | Electronics Group-Power Train | 1 |
| 14***76 | Autoshift Ar | 1 |
| 3E***63 | Switch As; (24-Volt)(Rear Floodlight) | 1 |
104-4218 Autoshift Ar
| 10***18 | Autoshift Ar; -Transmission | 1 |
| 14***72 | Service Group-Power Train | 1 |
| 3E***63 | Switch As; (24-Volt)(Rear Floodlight) | 1 |
144-2205 Case & Parts Gp-Planetary
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***87 | Sensor Group-Speed; (Transmission Output) | 1 |
| 11***45 | Plate As | 1 |
9w-5128 Case & Parts Gp-Planetary
| 10***87 | Sensor Group-Speed; (Transmission Output) | 1 |
| 10***88 | Wire As | 1 |
| 10***89 | Guard As | 1 |
6g-1755 Chain Gp-Drive
| 6G***31 | Link (Connector) | 1 |
| 6G***33 | Chain Group; (Tandem) | 4 |
| 6G***55 | Chain Group | 1 |
159-9228 Clutch Gp-Transmission -Forward
| 10***51 | Disc-Friction | 2 |
| 11***23 | Plate-Clutch | 6 |
| 13***19 | Bearing-Roller (Inner) | 1 |
6y-2301 Clutch Gp-Transmission -Forward
| 10***51 | Disc-Friction | 2 |
| 11***23 | Plate-Clutch | 6 |
| 1P***04 | Plug-Metal Cup | 1 |
159-9229 Clutch Gp-Transmission -Reverse, Second
| 10***81 | Spring-Wave | 1 |
| 11***23 | Plate-Clutch | 9 |
| 13***19 | Bearing-Roller (Inner) | 1 |
6y-2303 Clutch Gp-Transmission -1st & 3rd
| 10***81 | Spring-Wave | 2 |
| 13***19 | Bearing-Roller (Inner) | 1 |
| 13***30 | Gear As; (54-Teeth) | 1 |
6y-2302 Clutch Gp-Transmission -Reverse, Second
| 10***81 | Spring-Wave | 1 |
| 11***23 | Plate-Clutch | 9 |
| 1P***04 | Plug-Metal Cup | 1 |
8e-9316 Clutch Gp-Transmission -Hi & Lo
| 10***81 | Spring-Wave | 1 |
| 11***23 | Plate-Clutch | 5 |
| 3B***21 | Race And Roller Assem. (Inner) | 1 |
8w-5915 Control Gp-Differential Lock
| 13***20 | Hose As | 1 |
| 13***41 | Adapter-90 Degree | 1 |
| 14***95 | Valve & Mtg Group-Diff Lock | 1 |
6y-7822 Control Gp-Transmission Hyd
| 11***61 | Manifold | 1 |
| 1T***38 | Washer | 2 |
| 3E***06 | Bolt; (M8x1.25x130-mm) | 2 |
145-9531 Control Gp-Transmission Hyd
| 14***31 | Clip; (10.5-mm Id) | 1 |
| 14***31 | Control Group-Transmission Hydraulic | 1 |
| 14***33 | Valve Group-Transmission Control | 1 |
6y-7821 Control Gp-Transmission Hyd
| 11***88 | Switch As-Pressure; (Manual Modulation) | 1 |
| 14***92 | Switch As-Temperature; (Transmission Oil) | 1 |
| 1T***38 | Washer | 33 |
4w-5974 Cooler Gp-Transmission Oil
| 1A***29 | Bolt (1-1/8") Tube Assembly To Transfer Drive Case | 8 |
| 2Y***29 | Core As | 1 |
| 4W***74 | Cooler Group-Transmission Oil | 1 |
8e-3366 Coupling Gp-Torsional
| 16***28 | Bolt; (3/8-16-Thd)(3/8-16x1.25 In) | 12 |
| 28***99 | Coupling As | 1 |
| 5M***94 | Washer; Bracket To Tee, Bracket To Block, Tube As. To Tee, Tube As. To Oil Cooler | 12 |
8w-5430 Differential & Bevel Gear Gp
| 03***35 | Bolt-Self Locking; 2.22cm(.875 In.) Lg | 2 |
| 03***57 | Bolt; --To Reverse Shaft Bearing Retainer & Forward Shaft Bearing Retainer | 5 |
| 0S***56 | Bolt 4 1/4 In. (108 mm) --Front Support Assembly To Frame | 4 |
8w-5112 Differential Gp
| 10***82 | Gear-Bevel; (24-Teeth) | 1 |
| 10***83 | Gear-Bevel; (24-Teeth) | 1 |
| 14***57 | Gear-Bevel; (54-Teeth) | 1 |
154-2688 Differential Gp
| 10***82 | Gear-Bevel; (24-Teeth) | 1 |
| 10***83 | Gear-Bevel; (24-Teeth) | 1 |
| 15***88 | Differential Group | 1 |
8w-4368 Drive Gp-Final
| 03***35 | Bolt-Self Locking; 2.22cm(.875 In.) Lg | 18 |
| 12***81 | Gear-Planetary; (26-Teeth) | 6 |
| 19***73 | Shaft-Sun Gear; (18-Teeth) | 2 |
8w-5926 Filler Gp-Power Train Oil
| 5D***53 | Capscrew (3/8 - 16 Nc X 1 Gd8, Hex Self-Locking) | 2 |
| 7J***11 | Elbow-Pipe; (1/4-18 Nptf Thd) | 1 |
| 8B***15 | Gasket | 1 |
125-3286 Filter Gp-Oil -Transmission
| 12***42 | Base-Xmsn Oil Filter | 1 |
| 12***86 | Filter Group-Oil; -Transmission | 1 |
| 1R***73 | Filter Element As-Oil; (Advanced Efficiency)(Disposable Transmission Oil) | 1 |
8w-6235 Lines Gp-Transmission Oil
| 00***98 | Connector-Hose (3/4-14nptf Thd) | 2 |
| 10***23 | Hose As | 1 |
| 10***24 | Hose As | 1 |
142-6203 Mounting Gp-Wheel
| 0S***73 | Bolt 50.80 mm(2 In.) Long | 60 |
| 14***03 | Mounting Group-Wheel | 1 |
| 4M***53 | Washer-Hard; (24x38x3.5-mm Thk) | 60 |
8w-6222 Power Train Ar
| 12***65 | Wheel Group | 1 |
| 14***03 | Mounting Group-Wheel | 1 |
| 14***34 | Transmission Ar | 1 |
6y-8765 Pump Gp-Gear
| 4F***52 | Packing,Preformed Cover Part Of Kit P/N 4j***80 | 1 |
| 6V***20 | Bolt; (M10x1.5x30-mm) | 3 |
| 6Y***64 | Pump Group-Gear; -Transmission | 1 |
6y-8764 Pump Gp-Gear
| 1M***80 | Bearing; (25.413 mm Od) | 4 |
| 2B***73 | Key-Woodruff | 2 |
| 2D***09 | Seal--To Cover & Plate Bearing Retainers | 3 |
9w-5134 Screen Gp-Magnetic -Transmission
| 5F***00 | Seal-O-Ring | 1 |
| 5P***63 | Seal-O-Ring | 1 |
| 6V***19 | Bolt; (M8x1.25x40-mm) | 3 |
8w-5394 Shaft Gp-Drive -Transmission
| 0S***04 | Bolt (1/2-20x2.5in); (1/2-20x2.5-In) | 4 |
| 3K***96 | Guard-Dirt | 1 |
| 3K***86 | Plug | 1 |
6y-2300 Shaft Gp-Input
| 0L***26 | Plug -13mm(.512 In.) Outside Dia. | 1 |
| 1M***95 | Race & Roller Assem. (Inner) | 1 |
| 2H***90 | Race And Roller Assembly, Including:- | 1 |
8w-9292 Tandem & Cover Gp
| 00***53 | Elbow-Pipe; (1/2-14 Nptf Thd) | 2 |
| 1F***88 | Breather As; (Crankcase Pressure) | 2 |
| 2A***38 | Cover | 2 |
109-9973 Tire & Rim Gp
| 10***73 | Tire & Rim Group | 1 |
| 2D***07 | Stud | 1 |
| 2D***08 | Grommmet | 1 |
116-3063 Tire & Rim Gp
| 11***63 | Tire & Rim Group | 1 |
| 2D***07 | Stud | 1 |
| 2D***08 | Grommmet | 1 |
123-5270 Tire & Rim Gp
| 12***20 | Rim As | 1 |
| 12***70 | Tire & Rim Group | 1 |
| 2D***07 | Stud | 1 |
123-5268 Tire & Rim Gp
| 11***13 | Tire; (14-R24)(14.0 R24 Tg * Xgla2 G-2) | 1 |
| 12***20 | Rim As | 1 |
| 12***68 | Tire & Rim Group | 1 |
123-5272 Tire & Rim Gp
| 12***19 | Rim | 1 |
| 12***20 | Rim As | 1 |
| 12***72 | Tire & Rim Group | 1 |
116-3068 Tire & Rim Gp
| 11***68 | Tire & Rim Group | 1 |
| 2D***07 | Stud | 1 |
| 2D***08 | Grommmet | 1 |
116-3059 Tire & Rim Gp
| 11***27 | Valve Group-Tire | 1 |
| 11***59 | Tire & Rim Group | 1 |
| 2D***07 | Stud | 1 |
116-3061 Tire & Rim Gp
| 11***13 | Tire; (14-R24)(14.0 R24 Tg * Xgla2 G-2) | 1 |
| 11***61 | Tire & Rim Group | 1 |
| 2D***07 | Stud | 1 |
109-9972 Tire & Rim Gp
| 10***72 | Tire & Rim Group | 1 |
| 2D***07 | Stud | 1 |
| 2D***08 | Grommmet | 1 |
9d-6095 Tire Gp
| 9D***95 | Tire Group | 1 |
9d-3345 Tire Gp
| 2D***99 | Tire-Traction; (14x24)(14.00-24 10pr G-2) | 6 |
| 9D***45 | Tire Group | 1 |
126-8788 Tire Gp
| 12***88 | Tire Group | 1 |
8x-8288 Tire Gp
| 8X***88 | Tire Group | 1 |
7d-5610 Tire Gp
| 7D***10 | Tire Group | 1 |
2a-7335 Tire Gp
| 2A***35 | Tire Group | 1 |
112-9814 Tire Gp
| 11***14 | Tire Group | 1 |
144-2234 Transmission Ar
| 14***05 | Case & Parts Group-Planetary | 1 |
| 14***34 | Transmission Ar | 1 |
| 14***31 | Control Group-Transmission Hydraulic | 1 |
9w-7115 Transmission Ar
| 6Y***00 | Shaft Group-Input; -Transmission | 1 |
| 6Y***01 | Clutch Group-Transmission; -Forward | 1 |
| 6Y***02 | Clutch Group-Transmission; -Reverse & 2nd | 1 |
8x-5005 Universal Joint Gp
| 0S***79 | Bolt 5.08 cm(2 In.) Long | 8 |
| 3D***89 | Yoke-Coupling | 1 |
| 8X***05 | Universal Joint Group; -Main Drive Shaft | 1 |
7t-9073 Valve & Mtg Gp-Diff Lock
| 6G***79 | Kit-Cartridge Seal; (Includes 3 O-Rings) | 1 |
| 7T***73 | Valve & Mtg Group-Diff Lock | 1 |
| 9W***06 | Valve Group-Solenoid | 1 |
174-3705 Valve & Mtg Gp-Diff Lock
| 14***16 | Manifold | 1 |
| 15***64 | Valve Group-Solenoid | 1 |
| 17***05 | Valve & Mtg Group-Diff Lock | 1 |
144-6295 Valve & Mtg Gp-Diff Lock
| 14***94 | Valve Group-Solenoid; -Diff Lock | 1 |
| 14***95 | Valve & Mtg Group-Diff Lock | 1 |
| 14***16 | Manifold | 1 |
6y-7823 Valve Gp-Selector & Press Cont
| 09***07 | Nut; (M12x1.75-Thd) | 1 |
| 10***54 | Screw-Adjustment; (M12x1.75x18-mm) | 1 |
| 10***47 | Locknut; (5/8-11-Thd) | 1 |
145-9534 Valve Gp-Selector & Press Cont
| 09***07 | Nut; (M12x1.75-Thd) | 1 |
| 10***54 | Screw-Adjustment; (M12x1.75x18-mm) | 1 |
| 10***23 | Adjuster Assem. | 4 |
6y-7824 Valve Gp-Selector & Press Cont
| 09***07 | Nut; (M12x1.75-Thd) | 1 |
| 10***54 | Screw-Adjustment; (M12x1.75x18-mm) | 1 |
| 10***47 | Locknut; (5/8-11-Thd) | 1 |
9w-0706 Valve Gp-Solenoid
| 1S***93 | Strap; (Cable) (0.62in Dia) | 2 |
| 2D***35 | Locknut (Visor To Bracket) | 1 |
| 4B***76 | Washer Generator Line Leads (Use As Required) | 1 |
136-1678 Valve Gp-Solenoid
| 10***15 | Cartridge Assem. | 1 |
| 10***47 | Locknut; (5/8-11-Thd) | 1 |
| 13***78 | Valve Group-Solenoid | 1 |
144-6294 Valve Gp-Solenoid
| 11***43 | Locknut; (5/16-18-Thd) | 1 |
| 14***05 | Coil Assem. | 1 |
| 14***50 | Cartridge As | 1 |
154-3064 Valve Gp-Solenoid
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***43 | Locknut; (5/16-18-Thd) | 2 |
| 14***50 | Cartridge As | 1 |
145-9533 Valve Gp-Transmission Control
| 11***61 | Manifold | 1 |
| 14***67 | Poppet | 1 |
| 14***33 | Valve Group-Transmission Control | 1 |
151-0368 Wheel & Tire Ar
| 14***71 | Wheel & Tire Group | 6 |
| 15***68 | Wheel & Tire Ar | 1 |
151-0392 Wheel & Tire Ar
| 14***58 | Wheel & Tire Group | 6 |
| 15***92 | Wheel & Tire Ar | 1 |
142-6469 Wheel & Tire Ar
| 14***21 | Wheel & Tire Group | 6 |
| 14***69 | Wheel & Tire Ar | 1 |
142-6470 Wheel & Tire Ar
| 14***22 | Wheel & Tire Group | 6 |
| 14***70 | Wheel & Tire Ar | 1 |
142-6448 Wheel & Tire Ar
| 14***00 | Wheel & Tire Group | 6 |
| 14***48 | Wheel & Tire Ar | 1 |
142-6446 Wheel & Tire Ar
| 14***98 | Wheel & Tire Group | 6 |
| 14***46 | Wheel & Tire Ar | 1 |
142-6474 Wheel & Tire Ar
| 14***25 | Wheel & Tire Group | 6 |
| 14***74 | Wheel & Tire Ar | 1 |
142-6463 Wheel & Tire Ar
| 14***15 | Wheel & Tire Group | 6 |
| 14***63 | Wheel & Tire Ar | 1 |
151-0381 Wheel & Tire Ar
| 14***67 | Wheel & Tire Group | 6 |
| 15***81 | Wheel & Tire Ar | 1 |
151-0362 Wheel & Tire Ar
| 14***32 | Wheel & Tire Group | 6 |
| 15***62 | Wheel & Tire Ar | 1 |
8x-2480 Wheel & Tire Ar
| 8X***78 | Wheel Group | 1 |
| 8X***80 | Wheel & Tire Ar | 1 |
| 8X***88 | Tire Group | 1 |
151-0366 Wheel & Tire Ar
| 14***63 | Wheel & Tire Group | 6 |
| 15***66 | Wheel & Tire Ar | 1 |
151-0380 Wheel & Tire Ar
| 14***64 | Wheel & Tire Group | 6 |
| 15***80 | Wheel & Tire Ar | 1 |
151-0389 Wheel & Tire Ar
| 14***75 | Wheel & Tire Group | 6 |
| 15***89 | Wheel & Tire Ar | 1 |
142-6477 Wheel & Tire Ar
| 14***28 | Wheel & Tire Group | 6 |
| 14***77 | Wheel & Tire Ar | 1 |
151-0388 Wheel & Tire Ar
| 14***57 | Wheel & Tire Group | 6 |
| 15***88 | Wheel & Tire Ar | 1 |
151-0371 Wheel & Tire Ar
| 14***54 | Wheel & Tire Group | 6 |
| 15***71 | Wheel & Tire Ar | 1 |
142-6467 Wheel & Tire Ar
| 14***19 | Wheel & Tire Group | 6 |
| 14***67 | Wheel & Tire Ar | 1 |
8x-2479 Wheel & Tire Ar
| 7D***10 | Tire Group | 1 |
| 8X***78 | Wheel Group | 1 |
| 8X***79 | Wheel & Tire Ar | 1 |
151-0382 Wheel & Tire Ar
| 14***74 | Wheel & Tire Group | 6 |
| 15***82 | Wheel & Tire Ar | 1 |
142-6454 Wheel & Tire Ar
| 14***06 | Wheel & Tire Group | 6 |
| 14***54 | Wheel & Tire Ar | 1 |
151-0378 Wheel & Tire Ar
| 14***56 | Wheel & Tire Group | 6 |
| 15***78 | Wheel & Tire Ar | 1 |
142-6460 Wheel & Tire Ar
| 14***12 | Wheel & Tire Group | 6 |
| 14***60 | Wheel & Tire Ar | 1 |
112-2001 Wheel & Tire Ar
| 11***01 | Hydraulic Cylinder B, Wheel & Tire Ar | 1 |
| 2A***35 | Tire Group | 1 |
| 8X***78 | Wheel Group | 1 |
151-0379 Wheel & Tire Ar
| 14***61 | Wheel & Tire Group | 6 |
| 15***79 | Wheel & Tire Ar | 1 |
142-6455 Wheel & Tire Ar
| 14***07 | Wheel & Tire Group | 6 |
| 14***55 | Wheel & Tire Ar | 1 |
142-6461 Wheel & Tire Ar
| 14***13 | Wheel & Tire Group | 6 |
| 14***61 | Wheel & Tire Ar | 1 |
142-6457 Wheel & Tire Ar
| 14***09 | Wheel & Tire Group | 6 |
| 14***57 | Wheel & Tire Ar | 1 |
159-1782 Wheel & Tire Ar
| 15***82 | Wheel & Tire Ar | 1 |
| 15***85 | Wheel & Tire Group | 6 |
142-6472 Wheel & Tire Ar
| 14***24 | Wheel & Tire Group | 6 |
| 14***72 | Wheel & Tire Ar | 1 |
151-0364 Wheel & Tire Ar
| 14***53 | Wheel & Tire Group | 6 |
| 15***64 | Wheel & Tire Ar | 1 |
142-6449 Wheel & Tire Ar
| 14***01 | Wheel & Tire Group | 6 |
| 14***49 | Wheel & Tire Ar | 1 |
151-0372 Wheel & Tire Ar
| 14***72 | Wheel & Tire Group | 6 |
| 15***72 | Wheel & Tire Ar | 1 |
151-0374 Wheel & Tire Ar
| 14***55 | Wheel & Tire Group | 6 |
| 15***74 | Wheel & Tire Ar | 1 |
151-0393 Wheel & Tire Ar
| 14***76 | Wheel & Tire Group | 6 |
| 15***93 | Wheel & Tire Ar | 1 |
142-6464 Wheel & Tire Ar
| 14***16 | Wheel & Tire Group | 6 |
| 14***64 | Wheel & Tire Ar | 1 |
151-0375 Wheel & Tire Ar
| 14***73 | Wheel & Tire Group | 6 |
| 15***75 | Wheel & Tire Ar | 1 |
142-6458 Wheel & Tire Ar
| 14***10 | Wheel & Tire Group | 6 |
| 14***58 | Wheel & Tire Ar | 1 |
142-6466 Wheel & Tire Ar
| 14***18 | Wheel & Tire Group | 6 |
| 14***66 | Wheel & Tire Ar | 1 |
128-3111 Wheel & Tire Ar
| 12***88 | Tire Group | 1 |
| 12***10 | Wheel Group | 1 |
| 12***11 | Wheel & Tire Ar | 1 |
153-5468 Wheel & Tire Ar
| 15***67 | Wheel & Tire Group | 6 |
| 15***68 | Wheel & Tire Ar | 1 |
142-6445 Wheel & Tire Ar
| 14***97 | Wheel & Tire Group | 6 |
| 14***45 | Wheel & Tire Ar | 1 |
151-0385 Wheel & Tire Ar
| 14***85 | Wheel & Tire Group | 6 |
| 15***85 | Wheel & Tire Ar | 1 |
151-0365 Wheel & Tire Ar
| 14***60 | Wheel & Tire Group | 6 |
| 15***65 | Wheel & Tire Ar | 1 |
142-6372 Wheel & Tire Gp
| 14***86 | Tire; (17.5-25) | 1 |
| 14***72 | Wheel & Tire Group | 1 |
| 2D***07 | Stud | 1 |
142-6373 Wheel & Tire Gp
| 14***87 | Tire; (17.5-25) | 1 |
| 14***73 | Wheel & Tire Group | 1 |
| 2D***07 | Stud | 1 |
142-6385 Wheel & Tire Gp
| 10***49 | Tire; (17.5-R25) | 1 |
| 14***29 | Wheel Group | 1 |
| 14***85 | Wheel & Tire Group | 1 |
142-6367 Wheel & Tire Gp
| 10***35 | Tire; (17.5-R25) | 1 |
| 14***29 | Wheel Group | 1 |
| 14***67 | Wheel & Tire Group | 1 |
142-6312 Wheel & Tire Gp
| 12***20 | Rim As | 1 |
| 14***75 | Tire; (14-24)(14.00-24 12pr G-2 Gn) | 1 |
| 14***12 | Wheel & Tire Group | 1 |
142-6328 Wheel & Tire Gp
| 11***13 | Valve Group-Tire; (Tire Inflation) | 1 |
| 11***14 | Stem As | 1 |
| 14***60 | Tire; (14-R24)(14.0 R24 *Xsnoplus Mx) | 1 |
142-6324 Wheel & Tire Gp
| 12***20 | Rim As | 1 |
| 12***54 | Tire; (14.0 R24 * Sg-2b Gy) | 1 |
| 14***24 | Wheel & Tire Group | 1 |
142-6330 Wheel & Tire Gp
| 11***13 | Valve Group-Tire; (Tire Inflation) | 1 |
| 11***14 | Stem As | 1 |
| 14***07 | Tire; (14-R24)(14.0 R24 * Vsw Bs) | 1 |
142-6297 Wheel & Tire Gp
| 12***20 | Rim As | 1 |
| 14***70 | Tire; (14.00-24 10pr G-2 Gy) | 1 |
| 14***97 | Wheel & Tire Group | 1 |
142-6355 Wheel & Tire Gp
| 14***84 | Tire; (17.5-25) | 1 |
| 14***55 | Wheel & Tire Group | 1 |
| 2D***07 | Stud | 1 |
142-6318 Wheel & Tire Gp
| 12***78 | Tire; (14.00 R24 Tg Rl2f * G-2) | 1 |
| 12***20 | Rim As | 1 |
| 14***18 | Wheel & Tire Group | 1 |
142-6353 Wheel & Tire Gp
| 12***50 | Tire-Tubeless; (17.5-25) | 1 |
| 14***53 | Wheel & Tire Group | 1 |
| 2D***07 | Stud | 1 |
142-6376 Wheel & Tire Gp
| 14***87 | Tire; (17.5-25) | 1 |
| 14***29 | Wheel Group | 1 |
| 14***76 | Wheel & Tire Group | 1 |
159-1785 Wheel & Tire Gp
| 14***29 | Wheel Group | 1 |
| 15***51 | Tire; (17.5-R25) | 1 |
| 15***85 | Wheel & Tire Group | 1 |
142-6374 Wheel & Tire Gp
| 12***51 | Tire; (17.5-25) | 1 |
| 14***29 | Wheel Group | 1 |
| 14***74 | Wheel & Tire Group | 1 |
142-6332 Wheel & Tire Gp
| 11***13 | Valve Group-Tire; (Tire Inflation) | 1 |
| 11***14 | Stem As | 1 |
| 14***26 | Wheel Group | 1 |
142-6363 Wheel & Tire Gp
| 14***63 | Wheel & Tire Group | 1 |
| 2D***07 | Stud | 1 |
| 2D***08 | Grommmet | 1 |
142-6357 Wheel & Tire Gp
| 14***83 | Tire; (17.5-25) | 1 |
| 14***29 | Wheel Group | 1 |
| 14***57 | Wheel & Tire Group | 1 |
142-6358 Wheel & Tire Gp
| 14***84 | Tire; (17.5-25) | 1 |
| 14***29 | Wheel Group | 1 |
| 14***58 | Wheel & Tire Group | 1 |
142-6315 Wheel & Tire Gp
| 11***13 | Tire; (14-R24)(14.0 R24 Tg * Xgla2 G-2) | 1 |
| 12***20 | Rim As | 1 |
| 14***15 | Wheel & Tire Group | 1 |
142-6306 Wheel & Tire Gp
| 12***20 | Rim As | 1 |
| 14***73 | Tire; (14.00-24 12pr G-2 Gy) | 1 |
| 14***06 | Wheel & Tire Group | 1 |
142-6321 Wheel & Tire Gp
| 10***67 | Tire; (14-R24)(14.0 R24 * Xmps Mx) | 1 |
| 12***20 | Rim As | 1 |
| 14***21 | Wheel & Tire Group | 1 |
142-6356 Wheel & Tire Gp
| 12***50 | Tire-Tubeless; (17.5-25) | 1 |
| 14***29 | Wheel Group | 1 |
| 14***56 | Wheel & Tire Group | 1 |
142-6364 Wheel & Tire Gp
| 14***29 | Wheel Group | 1 |
| 14***64 | Wheel & Tire Group | 1 |
| 2D***07 | Stud | 1 |
142-6375 Wheel & Tire Gp
| 14***86 | Tire; (17.5-25) | 1 |
| 14***29 | Wheel Group | 1 |
| 14***75 | Wheel & Tire Group | 1 |
142-6360 Wheel & Tire Gp
| 14***60 | Wheel & Tire Group | 1 |
| 2D***07 | Stud | 1 |
| 2D***08 | Grommmet | 1 |
142-6310 Wheel & Tire Gp
| 11***13 | Valve Group-Tire; (Tire Inflation) | 1 |
| 11***14 | Stem As | 1 |
| 14***74 | Tire; (14.00-24 12pr G-2 Fs) | 1 |
142-6309 Wheel & Tire Gp
| 12***20 | Rim As | 1 |
| 14***74 | Tire; (14.00-24 12pr G-2 Fs) | 1 |
| 14***09 | Wheel & Tire Group | 1 |
153-5467 Wheel & Tire Gp
| 10***49 | Tire; (17.5-R25) | 1 |
| 15***67 | Wheel & Tire Group | 1 |
| 2D***07 | Stud | 1 |
142-6322 Wheel & Tire Gp
| 10***67 | Tire; (14-R24)(14.0 R24 * Xmps Mx) | 1 |
| 11***13 | Valve Group-Tire; (Tire Inflation) | 1 |
| 11***14 | Stem As | 1 |
142-6300 Wheel & Tire Gp
| 12***20 | Rim As | 1 |
| 14***71 | Tire; (14.00-24 10pr G-2 Fs) | 1 |
| 14***00 | Wheel & Tire Group | 1 |
142-6313 Wheel & Tire Gp
| 11***13 | Valve Group-Tire; (Tire Inflation) | 1 |
| 11***14 | Stem As | 0 |
| 14***75 | Tire; (14-24)(14.00-24 12pr G-2 Gn) | 1 |
142-6316 Wheel & Tire Gp
| 11***13 | Valve Group-Tire; (Tire Inflation) | 1 |
| 11***14 | Stem As | 1 |
| 11***13 | Tire; (14-R24)(14.0 R24 Tg * Xgla2 G-2) | 1 |
142-6298 Wheel & Tire Gp
| 11***13 | Valve Group-Tire; (Tire Inflation) | 1 |
| 11***14 | Stem As | 1 |
| 14***70 | Tire; (14.00-24 10pr G-2 Gy) | 1 |
142-6301 Wheel & Tire Gp
| 11***13 | Valve Group-Tire; (Tire Inflation) | 1 |
| 11***14 | Stem As | 1 |
| 14***71 | Tire; (14.00-24 10pr G-2 Fs) | 1 |
142-6371 Wheel & Tire Gp
| 12***51 | Tire; (17.5-25) | 1 |
| 14***71 | Wheel & Tire Group | 1 |
| 2D***07 | Stud | 1 |
142-6319 Wheel & Tire Gp
| 11***13 | Valve Group-Tire; (Tire Inflation) | 1 |
| 11***14 | Stem As | 1 |
| 12***78 | Tire; (14.00 R24 Tg Rl2f * G-2) | 1 |
142-6361 Wheel & Tire Gp
| 14***29 | Wheel Group | 1 |
| 14***61 | Wheel & Tire Group | 1 |
| 2D***07 | Stud | 1 |
142-6307 Wheel & Tire Gp
| 11***13 | Valve Group-Tire; (Tire Inflation) | 1 |
| 11***14 | Stem As | 1 |
| 14***26 | Wheel Group | 1 |
142-6325 Wheel & Tire Gp
| 11***13 | Valve Group-Tire; (Tire Inflation) | 1 |
| 11***14 | Stem As | 1 |
| 12***54 | Tire; (14.0 R24 * Sg-2b Gy) | 1 |
142-6354 Wheel & Tire Gp
| 14***83 | Tire; (17.5-25) | 1 |
| 14***54 | Wheel & Tire Group | 1 |
| 2D***07 | Stud | 1 |
142-6366 Wheel & Tire Gp
| 10***35 | Tire; (17.5-R25) | 1 |
| 14***66 | Wheel & Tire Group | 1 |
| 2D***07 | Stud | 1 |
148-2405 Wheel Ar
| 14***04 | Wheel Group | 6 |
| 14***05 | Wheel Ar, Locking Plate | 1 |
142-6305 Wheel Ar
| 14***04 | Wheel Group | 6 |
| 14***05 | Wheel Ar | 1 |
148-2409 Wheel Ar
| 14***08 | Wheel Group | 6 |
| 14***09 | Washer, Wheel Ar | 1 |
142-6303 Wheel Ar
| 14***72 | Wheel Group | 6 |
| 14***03 | Wheel Ar | 1 |
8x-2481 Wheel Gp
| 0S***73 | Bolt 50.80 mm(2 In.) Long | 60 |
| 2D***07 | Stud | 1 |
| 2D***08 | Grommmet | 1 |
8x-2478 Wheel Gp
| 0S***73 | Bolt 50.80 mm(2 In.) Long | 60 |
| 2D***07 | Stud | 1 |
| 2D***08 | Grommmet | 1 |
123-5265 Wheel Gp
| 0S***73 | Bolt 50.80 mm(2 In.) Long | 60 |
| 12***20 | Rim As | 6 |
| 12***65 | Wheel Group | 1 |
142-6226 Wheel Gp
| 14***26 | Wheel Group | 1 |
| 29***07 | Rim As; (10x24) | 1 |
| 2D***54 | Ring-Lock | 1 |
142-6304 Wheel Gp
| 11***13 | Valve Group-Tire; (Tire Inflation) | 1 |
| 11***14 | Stem As | 1 |
| 14***26 | Wheel Group | 1 |
142-6229 Wheel Gp
| 14***29 | Wheel Group | 1 |
| 28***25 | Rim As; (14x25) | 1 |
| 4K***81 | Ring-Lock; (Lock) | 1 |
142-6172 Wheel Gp
| 12***20 | Rim As | 1 |
| 14***72 | Wheel Group | 1 |
| 2D***07 | Stud | 1 |
148-2404 Wheel Gp
| 14***04 | Wheel Group | 1 |
| 2D***07 | Stud | 1 |
| 2D***08 | Grommmet | 1 |
128-3110 Wheel Gp
| 0S***73 | Bolt 50.80 mm(2 In.) Long | 60 |
| 12***10 | Wheel Group | 1 |
| 2D***07 | Stud | 1 |
148-2408 Wheel Gp
| 14***29 | Wheel Group | 1 |
| 14***08 | Wheel Group | 1 |
| 2D***07 | Stud | 1 |
Service Equipment And Supplies
111-1719 Box Gp-Tool
| 11***19 | Box Group-Tool | 1 |
| 12***49 | Tool Box | 1 |
| 24***41 | Padlock Group; (1 On Fuel Tank Cap) (1 On Hydraulic Tank Cap) (1 On Grill Latch) | 1 |
339-6231 Film Gp
| 2Y***68 | Plate-Serial Number-Engine | 1 |
| 2Y***09 | Seal-Wire | 2 |
| 2Y***40 | Plate-Engine Information-Portuguese | 1 |
116-9406 Plate & Film Gp -German
| 10***23 | Film-Instruction; (Hydraulic Accumulator) | 2 |
| 11***06 | Plate & Film Group; -German | 1 |
| 13***91 | Film-Warning; (Unexpected Movement) | 1 |
116-9430 Plate & Film Gp
| 10***08 | Film-Warning; (Jump Start, Read Omm) | 2 |
| 10***29 | Plate-Warning; (Do Not Operate) | 1 |
| 11***30 | Plate & Film Group | 1 |
116-9400 Plate & Film Gp -Danish
| 11***00 | Plate & Film Group; -Danish | 1 |
| 13***88 | Film-Warning; (Unexpected Movement) | 1 |
| 3E***72 | Film-Warning; (Rotating Fan Blades) | 6 |
133-7813 Plate & Film Gp
| 10***09 | Film-Warning; (Jumper Cables) | 2 |
| 10***30 | Plate-Warning; (Do Not Operate) | 1 |
| 12***20 | Plate-Warning; (High Pressure) | 2 |
133-7820 Plate & Film Gp -Finnish
| 10***09 | Film-Warning; (Jumper Cables) | 2 |
| 10***30 | Plate-Warning; (Do Not Operate) | 1 |
| 12***20 | Plate-Warning; (High Pressure) | 2 |
116-9425 Plate & Film Gp
| 11***25 | Plate & Film Group | 1 |
| 13***82 | Film-Warning; (Unexpected Movement) | 1 |
| 1P***83 | Plate-Warning; (High Pressure) | 2 |
133-7821 Plate & Film Gp
| 13***21 | Plate & Film Group | 1 |
116-9424 Plate & Film Gp
| 11***24 | Plate & Film Group | 1 |
| 13***81 | Film-Warning; (Unexpected Movement) | 1 |
| 1P***82 | Plate-Warning; (High Press Cylinder) | 2 |
116-9426 Plate & Film Gp
| 11***26 | Plate & Film Group | 1 |
| 13***83 | Film-Warning; (Unexpected Movement) | 1 |
| 3E***44 | Film-Instruction; (Hydraulic Accumulator) | 2 |
116-9423 Plate & Film Gp
| 11***23 | Plate & Film Group | 1 |
| 13***85 | Film-Warning; (Unexpected Movement) | 1 |
| 3E***69 | Film-Warning; (Rotating Fan Blades)(On Side Of Fuel Tank) | 4 |
116-9385 Plate & Film Gp -Italian
| 11***85 | Plate & Film Group; -Italian | 1 |
| 13***81 | Film-Warning; (Unexpected Movement) | 1 |
| 1P***82 | Plate-Warning; (High Press Cylinder) | 2 |
115-9846 Plate & Film Gp
| 11***46 | Plate & Film Group | 1 |
| 13***85 | Film-Warning; (Unexpected Movement) | 1 |
| 3E***69 | Film-Warning; (Rotating Fan Blades)(On Side Of Fuel Tank) | 6 |
116-9387 Plate & Film Gp -Spanish
| 11***87 | Plate & Film Group; -Spanish | 1 |
| 13***83 | Film-Warning; (Unexpected Movement) | 1 |
| 3E***44 | Film-Instruction; (Hydraulic Accumulator) | 2 |
116-9428 Plate & Film Gp
| 10***23 | Film-Instruction; (Hydraulic Accumulator) | 2 |
| 11***28 | Plate & Film Group | 1 |
| 13***91 | Film-Warning; (Unexpected Movement) | 1 |
116-9388 Plate & Film Gp -Portuguese
| 11***88 | Plate & Film Group; -Portuguese | 1 |
| 13***87 | Film-Warning; (Unexpected Movement) | 1 |
| 3E***71 | Film-Warning; (Rotating Fan Blades)(On Side Of Fuel Tank) | 6 |
116-9386 Plate & Film Gp -French
| 11***86 | Plate & Film Group; -French | 1 |
| 13***82 | Film-Warning; (Unexpected Movement) | 1 |
| 1P***83 | Plate-Warning; (High Pressure) | 2 |
133-7812 Plate & Film Gp -Norwegian
| 10***08 | Film-Warning; (Jump Start, Read Omm) | 2 |
| 10***29 | Plate-Warning; (Do Not Operate) | 1 |
| 12***19 | Plate-Warning; (High Pressure) | 2 |
116-9429 Plate & Film Gp
| 11***29 | Plate & Film Group | 1 |
| 13***87 | Film-Warning; (Unexpected Movement) | 1 |
| 3E***71 | Film-Warning; (Rotating Fan Blades)(On Side Of Fuel Tank) | 2 |
5m-8212 Plate & Film Gp
| 10***64 | Film; (Identification) (Engine Oil Filter) | 1 |
| 10***88 | Film-Stripe; (Cat)(Engine Enclosure) | 2 |
| 10***89 | Film-Stripe; (Rh)(Engine Enclosure) | 1 |
116-9427 Plate & Film Gp
| 11***27 | Plate & Film Group | 1 |
| 13***84 | Film-Warning; (Unexpected Movement) | 1 |
| 1P***84 | Plate-Warning; (High Pressure) | 2 |
116-9401 Plate & Film Gp -Dutch
| 11***01 | Plate & Film Group; -Dutch | 1 |
| 13***84 | Film-Warning; (Unexpected Movement) | 1 |
| 1P***84 | Plate-Warning; (High Pressure) | 2 |
116-9407 Plate & Film Gp -Swedish
| 11***07 | Plate & Film Group; -Swedish | 1 |
| 13***86 | Film-Warning; (Unexpected Movement) | 1 |
| 3E***90 | Plate-Instruction; (Do Not Drill Or Weld) | 1 |
116-9389 Plate & Film Gp -Greek
| 11***89 | Plate & Film Group; -Greek | 1 |
| 13***86 | Film-Warning; (Unexpected Movement) | 1 |
| 3E***70 | Film-Warning; (Rotating Fan Blades) | 6 |
116-9422 Plate & Film Gp
| 11***22 | Plate & Film Group | 1 |
| 13***86 | Film-Warning; (Unexpected Movement) | 1 |
| 3E***90 | Plate-Instruction; (Do Not Drill Or Weld) | 1 |
Work Tools
107-3420 Bit Gp
| 06***60 | Ring-Retaining | 1 |
| 10***80 | Bit Group | 56 |
| 10***20 | Bit Group | 1 |
107-3418 Bit Gp
| 06***60 | Ring-Retaining | 1 |
| 10***80 | Bit Group | 70 |
| 10***18 | Bit Group | 1 |
107-3417 Bit Gp
| 06***60 | Ring-Retaining | 1 |
| 10***80 | Bit Group | 60 |
| 10***17 | Bit Group | 1 |
107-3419 Bit Gp
| 06***60 | Ring-Retaining | 1 |
| 10***80 | Bit Group | 48 |
| 10***19 | Bit Group | 1 |
107-3398 Bit Gp-End
| 10***98 | Bit Group-End | 1 |
| 1J***62 | Bolt-Plow | 10 |
| 5F***33 | Bolt-Plow; (3/4-10x3.75-In) | 6 |
107-3395 Bit Gp-End
| 10***95 | Bit Group-End | 1 |
| 4F***57 | Bolt-Plow; (5/8-11x2.75-In) | 6 |
| 4F***58 | Bolt 76.2 mm (3.00") Long | 4 |
7d-6671 Bit Gp-End
| 4F***57 | Bolt-Plow; (5/8-11x2.75-In) | 10 |
| 7D***71 | Bit Group-End | 1 |
| 9W***67 | Bit-End | 2 |
124-4190 Blade Ar
| 10***87 | Lines Group-Hydraulic; -Lh | 1 |
| 11***85 | Lines Group-Hydraulic; -Rh | 1 |
| 11***56 | Drive Group-Circle | 1 |
8x-8016 Blade Gp
| 11***14 | Rail-Moldboard | 2 |
| 3F***08 | Bolt-Plow; (5/8-11x2.25-In) | 40 |
| 4K***67 | Nut Rear Support To Frame | 40 |
8x-8011 Blade Gp
| 11***13 | Rail-Moldboard | 1 |
| 3F***08 | Bolt-Plow; (5/8-11x2.25-In) | 36 |
| 4K***67 | Nut Rear Support To Frame | 36 |
112-4521 Blade Gp -14 Ft
| 11***14 | Rail-Moldboard | 1 |
| 11***21 | Blade Group; -14 Ft | 1 |
| 2J***06 | Nut Front Support To Frame; Nut-Front Support To Frame | 40 |
112-4520 Blade Gp
| 11***13 | Rail-Moldboard | 1 |
| 11***20 | Blade Group | 1 |
| 2J***06 | Nut Front Support To Frame; Nut-Front Support To Frame | 36 |
116-0379 Bracket Gp-Scarifier
| 11***79 | Bracket Group-Scarifier | 1 |
| 8W***81 | Plate | 1 |
| 8W***84 | Bracket As | 1 |
107-3425 Edge Gp-Cutting
| 10***25 | Edge Group-Cutting | 1 |
| 5D***62 | Cutting Edge - R.H. - 6 Foot | 2 |
107-3426 Edge Gp-Cutting
| 10***26 | Edge Group-Cutting | 1 |
| 5D***61 | Cutting Edge - L.H. - 7 Foot | 2 |
107-3397 Edge Gp-Cutting -7 Ft
| 10***97 | Edge Group-Cutting; -7 Ft | 1 |
| 7D***77 | Edge-Cutting; (7-Ft Each) | 2 |
107-3393 Edge Gp-Cutting
| 10***93 | Edge Group-Cutting | 1 |
| 5D***59 | Cutting Edge-- 2.1336 M (7 Foot) | 2 |
107-3392 Edge Gp-Cutting
| 10***92 | Edge Group-Cutting; -6-Ft | 1 |
| 5D***58 | Cutting Edge --1.8288 M (6 Foot) | 2 |
107-3396 Edge Gp-Cutting -6 Ft
| 10***96 | Edge Group-Cutting; -6 Ft | 1 |
| 7D***76 | Edge-Cutting; (6-Ft Each) | 2 |
8w-3332 Extension Gp-Blade -Lh
| 17***40 | Plate As | 1 |
| 17***42 | Spacer; (2-mm Thk) | 1 |
| 17***43 | Spacer; (1-mm Thk) | 2 |
203-8467 Extension Gp-Blade -Rh
| 14***53 | Extension | 1 |
| 17***41 | Plate As | 1 |
| 17***42 | Spacer; (2-mm Thk) | 1 |
110-5326 Extension Gp-Blade -Rh
| 11***26 | Extension Group-Blade; -Rh | 1 |
| 11***34 | Spacer; (3-mm Thk) | 3 |
| 11***36 | Angle As | 1 |
8w-3330 Extension Gp-Blade -Rh
| 17***41 | Plate As | 1 |
| 17***42 | Spacer; (2-mm Thk) | 1 |
| 17***43 | Spacer; (1-mm Thk) | 2 |
110-5327 Extension Gp-Blade -Lh
| 11***27 | Extension Group-Blade; -Lh | 1 |
| 11***34 | Spacer; (3-mm Thk) | 3 |
| 11***35 | Angle As | 1 |
203-8466 Extension Gp-Blade -Lh
| 14***61 | Extension | 1 |
| 17***40 | Plate As | 1 |
| 17***42 | Spacer; (2-mm Thk) | 1 |
8x-1935 Lift Gp-Blade
| 0S***56 | Bolt 4 1/4 In. (108 mm) --Front Support Assembly To Frame | 4 |
| 12***87 | Washer-Thrust; (76.6x146x1-mm Thk)(.100 Thk) | 2 |
| 12***35 | Plate | 1 |
9w-7467 Mounting Gp-Ripper
| 10***22 | Plate | 2 |
| 10***23 | Cam As | 2 |
| 10***76 | Pin | 2 |
9w-7603 Ripper Ar
| 10***27 | Lines Group-Ripper | 1 |
| 11***54 | Cylinder Group-Ripper | 1 |
| 14***44 | Ripper Group | 1 |
145-2244 Ripper Gp
| 14***01 | Link As-Lower | 1 |
| 14***44 | Ripper Group | 1 |
| 1K***72 | Locknut Horn To Guard | 10 |
8j-7024 Ripper Gp
| 18***53 | Link As-Lower | 1 |
| 19***86 | Film; (Safety) (To Right And Left Of Fuel Tank) | 2 |
| 1K***72 | Locknut Horn To Guard | 10 |
108-1104 Scarifier Ar -Vee Type
| 10***04 | Scarifier Ar; -Vee Type | 1 |
| 11***79 | Bracket Group-Scarifier | 1 |
| 8W***13 | Cylinder & Mounting Group-Scrfr | 1 |
8x-6080 Scarifier Gp -Vee Type
| 10***74 | Bearing | 2 |
| 10***75 | Shaft As | 1 |
| 11***80 | Drawbar As | 1 |
4k-3330 Tooth Gp-Scarifier
| 19***18 | Shank | 9 |
| 4K***30 | Tooth Group-Scarifier | 1 |
| 5K***58 | Grommet | 9 |
8j-1434 Tooth Gp-Ripper -Straight
| 11***59 | Retainer Assembly; (G.E.T.) | 1 |
| 13***08 | Pin | 1 |
| 2K***13 | Pin | 1 |
140H ES serial number reference
The PIN/serial plate on a 140H-family grader is riveted to the main frame, typically on the right-hand side near the front, and is sometimes duplicated on a plate inside the cab. Read the first three characters as the serial number prefix - it identifies the specific model/configuration/plant build - and the digits that follow as the sequential unit number within that prefix run.
| Prefix | Identifies | Notes |
|---|---|---|
| 8KM | 140H ES motor grader | US-built run. Cat 3306 diesel (listed as 3306 DIT/DITA on spec sheets). Oil-service references place this prefix in the 1994-1996 build window - treat as approximate and confirm exact year with dealer. |
| 3AS | 140H ES motor grader | Brazil-built run (Caterpillar's Piracicaba plant). Cat 3306 diesel, same engine family as the 8KM-prefix run. No firm year window found in available sources - confirm with dealer. |
Frequently asked questions
What engine does the Caterpillar 140H ES use?
The 140H ES runs the Cat 3306 DIT, a direct-injection turbocharged inline-six diesel of 10.45 L displacement with Engine Power Management. Net power runs about 123 kW (165 hp) in the lower gears and up to 138 kW (185 hp) in the top gears at 2000 rpm. This engine option was built in both the US (serial prefix 8KM) and Brazil (prefix 3AS); the related 140H NA variant also used the 3306, while the plain 140H and 140H VHP models instead ran the electronically-governed 3176/3176C.
What is the operating weight of the Caterpillar 140H ES motor grader?
Standard operating weight runs about 14.7 tonnes (32,357-32,461 lb). Exact weight varies slightly by tire, counterweight, and attachment configuration, such as a rear ripper or push block, so confirm the figure on your machine's data plate for anything beyond a general estimate.
What replaced the Caterpillar 140H ES?
The 140K motor grader replaced the 140H line, with the 140M and later the Next Generation 140 continuing the family afterward. The 140H itself succeeded the long-running 140G, in production from 1974 to 1996.
What 140H ES owners discuss
What engine does the 140H ES actually run, and is it considered reliable?
The 140H ES carries the Cat 3306 DIT, a direct-injection turbocharged inline-six. Rated output runs roughly 138-140 kW (185-187 hp) depending on source and gear range; net power is gear-dependent, lower in gears 4-6 and peaking in 7-8. Owners and techs rate the 3306 highly for a mechanically simple, conservatively rated design with long service life and low unscheduled downtime compared to later electronically governed engines. This era has no regen or DEF aftertreatment, so none of the exhaust-system headaches that come with Tier 4 machines. The main wear item reported is turbo and boost-line degradation tied to age and hours rather than a design flaw.
What transmission problems come up most often on H-series 140 graders like this one, and what should get checked first?
Powershift transmission complaints center on losing specific gears (commonly reverse, or forward 3/4/8) or the transmission neutralizing itself mid-operation. Techs trace this to the forward/reverse shift solenoid, wiring harness to the transmission control valve, the control lever position sensor, or internal valve body wear. One recurring diagnostic path: a burnt shift coil can also damage the electronic control module since the coil driver circuit runs through it, so if a whole gear range drops out at once, check coil resistance and ECM harness continuity before condemning the transmission itself. Pull stored codes and check modulating pressure at the valve body before opening anything up. Loss of gear or range selection while grading near a slope or ditch edge is a safety issue - have your dealer verify the transmission control circuit before returning the machine to service.
What hydraulic and steering issues are commonly reported?
Steering and implement circuits run off engine-driven pumps. As pumps age, owners report a knocking or whining noise usually tied to cavitation or worn internal bearings rather than a whole-system fault. A soft or spongy steering wheel at full lock, or a hydraulic pressure drop when steering is held at full travel, has been traced to a worn cushion valve or a relief valve setting that has drifted out of spec, sometimes persisting even after a pump swap. On higher-hour machines under sustained heavy blade work, hydraulic tank overheating and excess pressure buildup shows up; check relief valve settings at the pump and control valve block. Loss of steering assist or pressure is safety-critical - have your dealer verify the steering circuit before operating near traffic or a drop-off edge.
What wear pattern shows up on the circle, drawbar, and moldboard - the equivalent of undercarriage wear on this machine?
A grader has no track undercarriage, so the comparable wear system is the circle, drawbar, and moldboard slide assembly. Owners and techs watch tightness in the moldboard slides, circle support wear strips, and the drawbar ball stud, since looseness in any of these directly affects the machine's ability to hold a finish grade to tolerance. Circle teeth and pinion wear from inadequate greasing is a recurring complaint; a centralized grease system for the circle is often cited as reducing this specific failure mode. Routine shimming of wear strips and a disciplined greasing interval are treated as normal upkeep on this class of grader, not something unique to a worn unit.
What articulation and frame issues get discussed?
Articulation cylinder reseals are a recurring topic - oil leaking from the ram over time, traced to seal wear, occasionally recurring after a reseal if the cylinder bore itself is scored. A front and rear frame that doesn't track straight when articulated is called out as a sign of a bent or loose articulation joint, distinct from ordinary seal leakage and worth investigating separately. Wheel lean cylinder service, including the tapered mounting pin, is described as routine but stubborn work since the pin tends to seize in its taper with age. Any articulation play or misalignment found during inspection should have your dealer verify the joint and pin before continued use.
What electrical and sensor faults come up in troubleshooting?
Reported fault codes on the H-series electronic control system include a transmission input speed sensor with an incorrect signal, an atmospheric pressure sensor reading voltage above normal, and a clutch or neutralizer limit switch showing voltage above normal. Throttle position sensor drift is cited as a cause of inconsistent engine response and hunting idle. Because these are three-part codes (module, component, failure mode), diagnosis relies on a dealer-level diagnostic reader to pull and interpret the exact code rather than guessing from symptoms. Exact code numbers can vary by ECM software revision across the 140H, 140H NA, and 140H ES variants since they share the same base electronic architecture.
What should I check when looking at a used 140H ES before buying?
Run the engine and cycle steering full left and full right, listening for cushion valve knock or abnormal noise at full lock. Raise the front end roughly 15 cm (6 in) and confirm both front wheels turn freely with no extra play in the radius arms; push down on one wheel to check the axle moves freely without bouncing. Inspect the articulation joint and cylinders for leaks or a reseal history, and check front-to-rear frame alignment when articulated straight - misalignment points to a bent or loose joint. Check the moldboard slides, circle support wear strips, and drawbar ball stud for looseness, since that affects grading accuracy more than hours alone. Pull stored fault codes with a diagnostic reader before test-driving, and ask for maintenance records. Inspect the ROPS for welds or drilling marks that would indicate prior damage or an unapproved repair - any ROPS modification, or steering and articulation play found during inspection, should have your dealer verify structural and hydraulic integrity before purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 140H ES part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.