Caterpillarforest productstrack feller buncher
Caterpillar 1290T
Maintenance schedule, common problems & OEM parts breakdown
The Caterpillar 1290T is a track-type feller buncher: a swing-boom carrier that mounts a felling head on a pin-on tilt frame rather than a quick coupler. It is a continuation of the Prentice 1290T, a design rooted in Fabtek track-carrier engineering that Blount International folded into the Prentice brand in 2006. Reported power comes from a Caterpillar mid-range diesel in the 3126/C7 family, but that is not confirmed specifically for this model - verify the engine off the data plate or PIN with a dealer. Operating weight is not documented in publicly available factory literature; treat any figure you see as unverified until pulled from the machine's own data plate, since it varies with felling-head choice and chassis options. The 1290T belongs to the Prentice/Cat 1000-2000-series track forestry family alongside the 1090, 1190, 1190T, 1390, 2290, 2390, and 2391, sharing chassis and swing-drive architecture across that range. Configurations included a factory self-leveling chassis/cab option on at least some units, plus disc-saw or bar-saw/shear felling heads on the same pin-on tilt frame.
Caterpillar picked up the 1290T when it bought Blount International's Forestry Division in November 2007, and continued the machine largely unchanged under Cat Forest Products branding while it engineered its own next-generation feller bunchers. Once Cat's clean-sheet, C9-ACERT-powered 511/521/522/532/541/552 track feller buncher line was ready, the Prentice-derived 1000-2000-series carriers were phased out, so the 1290T's run under the Cat badge was short and its build window blurs into the last Prentice-badged units. That short window, a factory PIN prefix (BZM) that is only lightly documented, and an operator/maintenance manual that was never widely indexed make the 1290T one of the thinner-documented machines in the Cat forestry catalog today. It still turns up on active logging fleets and at dismantling yards, and buyers and parts counters lean on serial-number-specific lookups rather than public spec sheets to pin down engine, weight, and configuration before ordering.
Below: full specifications, fluids & capacities, the factory service schedule, common service parts, verified fault codes, what owners discuss, attachment guidance, the complete assembly directory, and a serial-number reference. Complete parts lists with full OEM part numbers, exploded diagrams, quantities, and fitment data are available free in Heavy Parts AI.
Caterpillar 1290T specifications
Engine
| Engine model | Not documented in any publicly retrievable spec sheet. The 1290T is a track-mounted feller buncher from Caterpillar Forest Products' older track feller buncher family (1090, 1190, 1190T, 1290T, 1390T), which predates the current C9 ACERT-powered 500 series line (511/521/522/532/541/552 etc). No source ties a specific engine designation to the 1290T; confirm with a Cat dealer using the machine serial number. |
| Gross power | Not documented for this model in available sources. |
| Net power | Not documented for this model in available sources. |
| Displacement | Not documented for this model in available sources. |
| Cylinders | Not documented for this model in available sources. |
| Emissions tier | Not documented. Given the machine's age and position in the older Caterpillar forestry lineup, it likely predates modern off-road emissions tiering, but this is not confirmed by any source and is not stated as fact. |
Weights
| Operating weight | Not documented for this model in available sources. Comparable-class Caterpillar track feller bunchers from later series run roughly 11,000-24,000 kg depending on configuration, but this range is not confirmed as applicable to the 1290T and is not reported here as a spec. |
| Shipping weight | Not documented for this model in available sources. |
| Ground pressure | Not published for this model in available sources. |
Dimensions
| Transport length | Not documented for this model in available sources. |
| Transport width | Not documented for this model in available sources. |
| Transport height | Not documented for this model in available sources. |
| Track gauge | Not documented for this model in available sources. |
| Ground clearance | Not documented for this model in available sources. |
Performance
| Travel speed | Not documented for this model in available sources. |
| Gradeability | Not published for this model in available sources. |
| Felling/swing performance | Not documented for this model in available sources. Class-relevant figures such as swing torque and felling head lift capacity are attachment-dependent (Cat felling head models) and no source publishes them tied specifically to the 1290T carrier. |
Service capacities (summary)
| Fuel tank | Not documented for this model in available sources. |
| Hydraulic system | Not documented for this model in available sources. |
| Engine oil | Not documented for this model in available sources. |
| Cooling system | Not documented for this model in available sources. |
Values vary by configuration, region, and serial range — confirm against your machine before planning transport or lifts.
1290T fluids & capacities
| System | Capacity | Recommended fluid |
|---|---|---|
| Engine crankcase (with filter) | Not publicly documented for this model — verify with a Cat dealer using the machine serial number | Cat DEO or DEO-ULS diesel engine oil, viscosity grade selected by ambient temperature per the standard Cat multigrade chart; exact grade and engine family not confirmed for this unit |
| Cooling system | Not publicly documented for this model — verify with a Cat dealer using the machine serial number | Cat ELC (Extended Life Coolant) or a coolant meeting Cat's heavy-duty antifreeze/coolant spec; concentration by climate not confirmed for this unit |
| Fuel tank | Not publicly documented for this model — verify with a Cat dealer using the machine serial number | Ultra low sulfur diesel meeting Cat fuel specifications; no biodiesel blend limit confirmed for this unit |
| Hydraulic system and tank | Not publicly documented for this model — verify with a Cat dealer using the machine serial number | Cat HYDO Advanced or TDTO/HYDO family hydraulic oil, viscosity by climate per the standard Cat chart; exact grade not confirmed for this unit |
| Swing drive / travel drive compartments | Not publicly documented for this model — verify with a Cat dealer using the machine serial number | Cat TDTO (Transmission/Drivetrain Oil) family gear lubricant, grade by climate not confirmed for this unit |
| Final drives (each) | Not publicly documented for this model — verify with a Cat dealer using the machine serial number | Cat TDTO family final-drive oil, grade by climate not confirmed for this unit |
| Grease (chassis, swing bearing, boom/felling head pivots) | Spec only — no reservoir capacity applies | Cat Advanced 3Moly or Cat Utility grease (NLGI multipurpose extreme-pressure grease); exact Cat grease name not confirmed for this unit |
Capacities are refill values from factory literature — always fill to the dipstick/sight gauge, not the number.
Caterpillar 1290T maintenance schedule
| Service interval | Tasks |
|---|---|
| Every 50 h |
|
| Every 250 h |
|
| Every 500 h |
|
| Every 1,000 h |
|
| Every 2,000 h |
|
| Every 4,000 h |
|
| Every 6,000 h |
|
Servicing the 1290T beyond the schedule
Predictive Maintenance & Fluid Analysis
Run oil sampling on the swing-drive and final-drive gearcases alongside engine and hydraulic samples - these are stress points on a swing-boom carrier working a tilt-frame head all day. Track coolant and hydraulic temperature trends, since cooler cores pack with bark and needles fast in feller-buncher work and silently push both engine and swing-drive oil past temperature limits. If the reported 3126/C7-family diesel is confirmed on your unit, follow that engine's oil-sample intervals rather than a generic schedule.
Corrective & Common Repairs
Expect recurring wear at the tilt-frame pivot pins and bushings where the felling head hangs pin-on rather than on a quick coupler - these take the shock load of every tree cut and bunch. Saw-head drive components (disc-saw motor or bar-saw/shear drive) and their hose runs see the heaviest field failures; keep spares on hand. Swing-bearing bolt torque and undercarriage roller/sprocket wear are the next most common corrective jobs on this chassis family.
Overhaul & Rebuild Points
At major rebuild intervals, inspect the swing bearing and swing-drive gearbox for backlash and tooth wear - both carry the full torque load of the tilt-frame head through every swing cycle. Evaluate the felling-head gearbox and saw drive for bearing and seal condition, and check boom, stick, and tilt-frame weldments for fatigue cracking around pin bosses. If the unit carries the factory self-leveling chassis, include its leveling cylinders and valve bank in the rebuild scope.
Seasonal & Environment Servicing
Bark, needle, and mud pack-out around the swing drive, final drives, and cooler cores is constant in forestry duty - clear it on a set schedule, not just when temperatures climb. In cold-weather logging, confirm engine and hydraulic warm-up procedures before working the tilt-frame head or self-leveling system under load. Wet, swampy ground accelerates undercarriage wear and final-drive seal failure, so shorten track and final-drive inspection intervals when working soft or wet sites.
1290T common service parts
| Part number | Part | Notes | |
|---|---|---|---|
| 188-8044 | Film | Fuel system service | Check fitment → |
| 142-1339 | Filter Element As-Air | Air intake service | Check fitment → |
| 142-1404 | Filter Element As-Air | Air intake service | Check fitment → |
| 112-7448 | Filter Element-Cab Air | Air intake service | Check fitment → |
| 185-8154 | Filter Element-Cab Air | Air intake service | Check fitment → |
Always confirm against your machine's serial number — cross-check any part in Heavy Parts AI before ordering.
1290T fault codes & troubleshooting
| Code | Meaning | Likely cause | What to do |
|---|---|---|---|
| 100-01 | Engine Oil Pressure Low | Actual low oil pressure from low oil level or worn oil pump, or a faulty oil pressure sensor/wiring circuit | Shut down and check oil level and condition first, then verify pressure with a mechanical gauge before condemning the sensor |
| 110-00 | Engine Coolant Temperature High | Low coolant, plugged radiator core or debris screen, weak fan clutch, or a coolant temp sensor reading above the valid range | Check coolant level and radiator airflow, inspect fan drive, then check sensor wiring if temp reading seems inconsistent with gauge |
| 111-01 | Engine Coolant Level Low | Coolant leak in the system or a faulty coolant level sensor/connector | Inspect hoses, radiator and water pump for leaks, top up coolant, then check level sensor connector if fault persists |
| 164-03 | Injection Actuation Pressure Voltage Above Normal | Open circuit or short to a higher voltage source on the hydraulic injection actuation pressure sensor circuit | Inspect sensor connector and wiring harness for damage or corrosion before replacing the sensor |
| 164-04 | Injection Actuation Pressure Voltage Below Normal | Low engine oil level, a worn injection actuation (HEUI) pump, or a shorted/low sensor signal | Check engine oil level and condition first, then test wiring continuity and actuation pump pressure with diagnostic software |
| 168-01 | Battery/System Voltage Low | Weak or failing alternator, loose or worn drive belt, bad battery, or corroded charging system wiring | Load-test the battery, check belt tension, and test alternator charging output at the battery terminals |
| 190-08 | Engine Speed Signal Erratic, Intermittent or Incorrect | Damaged or misadjusted engine speed/timing sensor, debris on the sensor tip, or a chafed harness | Inspect sensor air gap and connector, check harness routing for chafe points near the flywheel housing |
| 102-01 | Boost Pressure Low | Air intake leak, restricted air filter, or a failing turbocharger, or a faulty boost pressure sensor | Inspect intake piping and clamps for leaks, check air filter restriction, then verify sensor readings against a manual boost gauge |
Codes and remedies are general guidance for this model family — always confirm with diagnostic tooling and your dealer before major repairs.
1290T attachments & work tools
Machine type and lineage
The 1290T is a large track feller buncher built under Cat Forest Products, the division formed after Caterpillar acquired Blount International's forestry business (Prentice brand) in late 2007. The model carries over the Prentice 1290T track feller buncher designation and chassis, later fitted with Cat-sourced engine, hydraulic, and undercarriage components.
Felling head - disc saw
Disc-saw felling heads are the standard cutting tool for this size class. A sister model in the same Prentice-heritage track buncher family is documented running a 22 in (56 cm), continuously spinning 360-degree rotating disc-saw head, matching the capacity class expected for the 1290T. Cat-engineered heads of similar capacity in this weight class run 3.2-4.2 t depending on tilt-frame option, though exact factory fitment for the 1290T serial range should be confirmed with a dealer.
Felling head - bar saw and shear alternatives
Bar-saw (retractable chainsaw-bar) and shear-type felling heads are offered as alternatives to disc saws across this class of large track feller buncher, used where dirty or hardwood stems foul a spinning disc. No factory documentation ties a specific bar-saw or shear model directly to the 1290T serial range - treat as class-typical and verify with your dealer.
Grab and accumulator arms / grapple
Multi-stem bunching is handled by hydraulic grab/accumulator arms integral to the felling head, standard practice for this machine class. Standalone forestry grapples for log sorting or loading also appear among aftermarket parts categories offered for this model, but factory-original fitment should be verified against the specific unit's build sheet.
Head mounting and tilt frame
Felling heads on this class of machine mount to the boom on a pin-on tilt frame rather than a hydraulic quick coupler. Comparable large track feller bunchers in this size class offer a partial-tilt frame (roughly 40 degrees of lateral tilt) or an optional full lateral tilt frame (up to about 220 degrees) for working uneven or side-sloping ground.
Hydraulic arrangement for work tools
Saw and grab-arm functions run off the machine's own main hydraulic pump circuit through an auxiliary high-flow line to the head; this class of buncher does not typically use a separate engine-driven PTO gearbox for the head. Post-acquisition units reference Cat-sourced hydraulic pumps, valves, and cylinders throughout the chassis and work-tool circuit.
Self-leveling / leveling chassis configuration
A factory self-leveling cab and chassis configuration was offered on this model for steep-slope work, alongside a standard non-leveling flat-ground configuration - at least one documented 1290T unit shipped with a self-leveling cab. Self-leveling track machines in this class are generally rated for steeper working slopes than non-leveling versions, though exact slope ratings vary by configuration/series.
Cab and undercarriage guarding
Heavy-duty forestry cab guarding meeting FOPS/ROPS/OPS requirements, with screened sliding side windows, is standard practice for this size class of track feller buncher. Track and undercarriage guarding (welded or bolt-on, depending on series) is likewise typical protection offered on machines in this weight class; exact guarding package for the 1290T serial range varies by configuration and should be confirmed against the specific unit.
All 1290T assemblies by section
Every catalogued assembly group for the Caterpillar 1290T. Open an assembly to preview the parts inside — full OEM part numbers are available in Heavy Parts AI.
Air Inlet And Exhaust System
239-6168 Air Cleaner Gp
| 15***26 | Switch; (Dome Light) | 1 |
| 15***27 | Lamp; (24-Volt)(Dome Light) | 2 |
| 15***28 | Lens; (Dome Light) | 1 |
210-9245 Air Cleaner Gp
| 09***86 | Seal - O-Ring (19.80 mm Id) | 1 |
| 13***73 | Hose-Fuel; (14 cm) | 0 |
| 13***08 | Clamp | 2 |
239-6171 Muffler Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***82 | Screw; (7.4x20-mm) | 2 |
| 14***83 | Seal | 1 |
Basic Engine
240-8522 Air Compressor Gp
| 15***23 | Valve-Sampling; (Engine Coolant) | 1 |
| 15***70 | Cap-Dust; (Engine Coolant) | 1 |
| 24***22 | Air Compressor Group | 1 |
240-9760 Drain Gp-Engine Oil
| 21***65 | Guard Group-Radiator | 1 |
| 23***73 | Radiator Group | 1 |
| 23***74 | Lines Group-Cooling | 1 |
231-6686 Drive Gp-Fan
| 11***73 | Bolt-12 Point Head; (M10x1.5x35-mm) | 4 |
| 1T***65 | Bolt 2.54 cm (1" Long) | 16 |
| 22***80 | Kit-Fan Hub | 1 |
239-6167 Mounting Gp-Engine
| 14***38 | Adapter, -6 Orb / Orfs X-Long | 2 |
| 14***69 | Adapter; (90° Elbow Orfs/Orb) | 1 |
| 14***85 | Elbow; (45°) | 1 |
Cooling System
239-6172 Cooling Ar
| 11***73 | Bolt-12 Point Head; (M10x1.5x35-mm) | 4 |
| 13***40 | Spider As-Fan; (8-Blade) | 1 |
| 19***12 | Guard As | 2 |
285-4360 Cooling Ar
| 08***10 | Spacer; (16.6x32x26-mm Thk) | 4 |
| 09***35 | Spacer; (11x25x20-mm Thk) | 1 |
| 09***88 | Clamp; (Hose) | 1 |
239-6188 Fan Gp-Reversible
| 11***46 | Plug-Pipe | 1 |
| 12***67 | Clip Loop | 1 |
| 14***03 | Grommet | 2 |
223-7634 Fan Gp-Reversible
| 03***65 | Cap As-Radiator; (Sea Water Heat Exchanger) | 1 |
| 22***34 | Fan Group-Reversible | 1 |
| 23***82 | Sleeve-Rubber | 8 |
239-6189 Fan Gp-Suction
| 06***51 | Clamp | 2 |
| 14***09 | Adapter As | 1 |
| 14***18 | Connector As | 2 |
285-4361 Lines Gp-Coolant
| 18***38 | Collar | 2 |
| 18***39 | Fan As; (Alternator) | 1 |
| 18***44 | Coil Assem. | 1 |
280-9831 Lines Gp-Cooling
| 03***12 | Terminal-Ring; (2-Ga, 1/4-In Screw)(Circuit Breaker) | 1 |
| 11***21 | Battery Group | 2 |
| 11***22 | Battery Group; (12-Volt, Maintenance Free, Wet) | 2 |
239-6174 Lines Gp-Cooling
| 12***58 | Pulley-Alternator; (8-Groove) | 1 |
| 19***27 | Bracket As | 1 |
| 19***20 | Alternator Group-Charging; -24-Volt, 95-Ampere | 1 |
239-6173 Radiator Gp
| 03***12 | Terminal-Ring; (2-Ga, 1/4-In Screw)(Circuit Breaker) | 1 |
| 11***22 | Battery Group; (12-Volt, Maintenance Free, Wet) | 2 |
| 12***73 | Cap As-Filler; (Battery) | 6 |
247-7743 Radiator Gp
| 24***43 | Radiator Group | 1 |
| 6V***22 | Tube-Heat Shrink; (25.4-mm Dia)(10-M) | 0 |
| 7F***60 | Washer | 6 |
285-4133 Radiator Gp
| 21***35 | Lighting Group-Flood; -Cab Front, Rear, Side, Engine Compartment | 1 |
| 21***37 | Warning Group-Backup | 1 |
| 23***77 | Battery & Wiring Group | 1 |
285-4362 Radiator Gp
| 21***37 | Warning Group-Backup | 1 |
| 23***78 | Wiring Group-Engine | 1 |
| 25***27 | Wiring Group-Hydraulic Tank Fill Pump | 1 |
Electrical And Starting System
3e-6328 Alarm Gp -Action
| 09***50 | Nut-Wing | 1 |
| 21***85 | Lamp Group-Flood; -24-Volt-Front | 3 |
| 21***87 | Lamp Group-Flood; -24-Volt, 65-Watt | 6 |
197-8820 Alternator Gp-Charging
| 11***27 | Screw-Machine; (M6x1x30-mm) | 4 |
| 11***78 | Lamp Group-Flood; -Suspended Mount | 1 |
| 13***20 | Hinge | 1 |
240-8521 Alternator Gp-Charging
| 11***27 | Screw-Machine; (M6x1x30-mm) | 4 |
| 13***20 | Hinge | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
318-8253 Battery & Wiring Gp
| 09***50 | Nut-Wing | 1 |
| 21***85 | Lamp Group-Flood; -24-Volt-Front | 3 |
| 21***87 | Lamp Group-Flood; -24-Volt, 65-Watt | 5 |
262-5305 Battery & Wiring Gp
| 23***25 | Lamp Group-Flood; -Suspended Mount | 3 |
| 25***13 | Cover | 1 |
| 25***14 | Lens; (Amber, Warning Beacon) | 1 |
239-6177 Battery & Wiring Gp
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 11***27 | Screw-Machine; (M6x1x30-mm) | 4 |
| 13***20 | Hinge | 1 |
9w-0742 Block Gp-Junction -Battery
| 6V***01 | Nut; (3/8-16-Thd)(Plate To Rh And Lh Bracket As) | 2 |
| 7X***08 | Washer-Hard; (10.2x16x2-mm Thk) | 2 |
| 9W***42 | Block Group-Junction; -Battery | 1 |
272-0083 Electrical Ar
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 3 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
240-8941 Electrical Ar
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***23 | Stud-Weld; (M10x1.5x25-mm) | 1 |
| 12***02 | Switch Group-Magnetic; -Starting Motor, Start Relay | 1 |
285-5315 Guard Gp-Electronic Control
| 17***31 | Screw; (Truss Head) (M4x0.7x12mm) | 6 |
| 20***81 | Converter-Power; (24-Volt To 12-Volt) | 1 |
| 22***14 | Panel Group-Fuse | 1 |
162-7755 Lamp Gp-Dome
| 13***89 | Clip; (Ladder) | 1 |
| 16***55 | Lamp Group-Dome; -Cab | 1 |
| 17***31 | Screw; (Truss Head) (M4x0.7x12mm) | 8 |
234-4325 Lamp Gp-Flood
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 23***25 | Lamp Group-Flood; -Suspended Mount | 1 |
219-6485 Lamp Gp-Flood
| 21***85 | Lamp Group-Flood; -24-Volt-Front | 1 |
| 2H***22 | Lockwasher | 2 |
| 6F***45 | Nut-Full; (3/8-24-Thd) | 2 |
219-6487 Lamp Gp-Flood
| 01***80 | Lockwasher | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
242-3517 Lamp Gp-Flood
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 24***17 | Lamp Group-Flood; -Suspended Mount | 1 |
112-9378 Lamp Gp-Flood
| 03***54 | Elbow; (90 Degree Bumped Tube) | 2 |
| 11***78 | Lamp Group-Flood; -Suspended Mount | 1 |
| 13***00 | Clip; (Tab) | 1 |
222-6770 Lighting Gp-Flood -Cab Front, Side
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 17***75 | Horn As; (24-Volt, High Tone) | 1 |
| 18***35 | Pin-Connector; (16-Ga To 18-Ga) | 2 |
250-0850 Lighting Gp-Flood -Cab Front, Side
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 21***85 | Lamp Group-Flood; -24-Volt-Front | 2 |
217-2435 Lighting Gp-Flood -Cab Front, Rear, Side, Engine Compartment
| 15***70 | Kit-Connecting Plug; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 18***36 | Socket-Connector; (16-Ga To 18-Ga) | 2 |
| 21***35 | Lighting Group-Flood; -Cab Front, Rear, Side, Engine Compartment | 1 |
261-1091 Lighting Gp-Flood -Cab Front, Rear, Side, Engine Compartment
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
117-3915 Motor Gp-Electric -Hydraulic Tank
| 09***66 | Washer; (Hard) (4.5x9x1mm Thk) | 1 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 2 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 3 |
306-9319 Mounting Gp-Wiring
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
240-9998 Panel Gp-Circuit Breaker
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
285-9270 Panel Gp-Circuit Breaker
| 03***12 | Terminal-Ring; (2-Ga, 1/4-In Screw)(Circuit Breaker) | 1 |
| 09***61 | Strap; (Cable) | 16 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
252-5803 Panel Gp-Fuse
| 03***93 | Screw-Machine; (10-32x19.05-mm) | 4 |
| 03***48 | Clip; (11.11mm .437in Id) | 3 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
222-5414 Panel Gp-Fuse
| 03***07 | Terminal-Ring; (0-Ga, 3/8-In Screw) | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***97 | Diode As; (Bipolar) | 1 |
238-5022 Panel Gp-Relay
| 03***93 | Screw-Machine; (10-32x19.05-mm) | 4 |
| 03***48 | Clip; (11.11mm .437in Id) | 3 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
224-9686 Preheater Gp-Machine -Diesel Fired
| 03***93 | Screw-Machine; (10-32x19.05-mm) | 4 |
| 03***48 | Clip; (11.11mm .437in Id) | 2 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
241-1782 Preheater Gp-Machine
| 09***29 | Ring; (Retaining) | 5 |
| 09***44 | Ring-Retaining | 5 |
| 13***41 | Washer | 1 |
338-3454 Starting Motor Gp-Electric
| 11***23 | Stud-Weld; (M10x1.5x25-mm) | 10 |
| 11***83 | Boss; (M10x1.5-Thd) | 1 |
| 33***54 | Starting Motor Group-Electric | 1 |
6v-0590 Starting Motor Gp-Electric
| 21***60 | Plate As | 1 |
| 6V***90 | Starting Motor Group-Electric; -Heavy-Duty, Rh | 1 |
| 7X***75 | Bolt; (M24x3x60-mm) | 8 |
237-1962 Starting Motor Gp-Electric
| 11***23 | Stud-Weld; (M10x1.5x25-mm) | 10 |
| 11***83 | Boss; (M10x1.5-Thd) | 1 |
| 22***45 | Bracket | 6 |
7n-0718 Switch Gp-Disconnect -Battery
| 08***87 | Grommet | 4 |
| 09***20 | Spacer; (25x44x6-mm Thk) | 38 |
| 09***83 | Shim (1.0 mm Thick) | 1 |
241-8368 Switch Gp-Magnetic -Main Relay
| 1K***50 | Spring | 1 |
| 20***38 | Rod As | 1 |
| 22***44 | Cover | 2 |
209-5582 Switch Gp-Magnetic
| 12***36 | Handle | 2 |
| 1K***50 | Spring | 1 |
| 20***38 | Rod As | 1 |
179-0006 Switch Gp-Magnetic
| 09***08 | Seal-O-Ring (Id=44.70mm) | 1 |
| 09***95 | Plug | 1 |
| 17***06 | Switch Group-Magnetic; -Hydraulic Tank Fill Pump/Motor Relay | 1 |
125-1302 Switch Gp-Magnetic -Start Relay
| 08***87 | Grommet | 5 |
| 09***20 | Spacer; (25x44x6-mm Thk) | 38 |
| 09***83 | Shim (1.0 mm Thick) | 1 |
167-0138 Switch Gp-Magnetic -Main Relay
| 11***83 | Seal (1100 cm) (Order By The Centimeter) | 0 |
| 14***85 | Seal (1100 cm) (Order By The Centimeter) | 0 |
| 16***38 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
254-3783 Switch Gp-Magnetic -Main Relay
| 12***36 | Handle | 2 |
| 25***83 | Switch Group-Magnetic; -Main Relay-Main Power Relay | 1 |
| 3R***22 | Hinge | 1 |
234-6613 Switch Gp-Position -Hydraulic Lockout
| 21***41 | Seal | 1 |
| 21***42 | Seal | 1 |
| 21***15 | Strip | 1 |
158-6634 Switch Gp-Toggle
| 15***11 | Lockwasher | 3 |
| 15***59 | Eyebolt; (M8x1.25x100-mm) | 2 |
| 15***34 | Switch Group-Toggle; -Stairway Access Lights | 1 |
165-5970 Switch Gp-Toggle -Hyd Tank Fill Pump, Motor
| 13***62 | Mount | 8 |
| 13***63 | Sleeve; (36-mm) | 4 |
| 16***70 | Switch Group-Toggle; -Engine Shutoff-Starting Aid-Diagnostic Mode Select | 1 |
217-2437 Warning Gp-Backup
| 11***31 | Mount Assem. | 8 |
| 21***37 | Warning Group-Backup | 1 |
| 24***98 | Sleeve | 8 |
253-2606 Wiring Gp-Boom -Floodlights
| 12***18 | Sleeve | 1 |
| 14***25 | Connector As. | 4 |
| 17***07 | Clip | 2 |
212-8018 Wiring Gp-Boom -Floodlights
| 17***94 | Pin As | 2 |
| 21***18 | Wiring Group-Boom; -Floodlights | 1 |
| 23***25 | Step As | 1 |
238-5006 Wiring Gp-Cab
| 16***89 | Step As | 4 |
| 22***68 | Frame As; (Rh) | 1 |
| 22***69 | Frame As; (Lh) | 1 |
222-5415 Wiring Gp-Cab
| 19***00 | Bolt-12 Point Head | 8 |
| 22***89 | Spacer; (31.75x60x76.2-mm Thk) | 20 |
| 22***90 | Spacer | 4 |
280-0558 Wiring Gp-Cab
| 12***34 | Bolt; (M24x3x340-mm) | 16 |
| 15***55 | Spacer | 16 |
| 15***70 | Guard As-Trk | 8 |
280-0561 Wiring Gp-Console
| 09***44 | Pin; (Cotter) | 1 |
| 11***02 | Link-Track Master; (Rh) | 1 |
| 11***03 | Link-Track Master; (Lh) | 1 |
238-8267 Wiring Gp-Console
| 09***80 | Setscrew; (Socket) (M16x2x20mm) | 4 |
| 15***61 | Idler Group-Front | 2 |
| 23***67 | Wiring Group-Console | 1 |
222-5416 Wiring Gp-Console
| 10***81 | Seal Group-Duo-Cone | 2 |
| 11***47 | Idler & Bearing As | 1 |
| 1H***39 | Packing,Preformed Cover Part Of Kit P/N 4j***80 | 2 |
239-6178 Wiring Gp-Engine
| 14***56 | Roller Group-Track-Single Flange | 22 |
| 23***78 | Wiring Group-Engine | 1 |
| 7X***54 | Bolt; (M24x3.0x110mm) | 88 |
272-0085 Wiring Gp-Engine
| 18***79 | Roller Group-Track-Double Flange | 18 |
| 27***85 | Wiring Group-Engine | 1 |
| 7X***54 | Bolt; (M24x3.0x110mm) | 72 |
255-6927 Wiring Gp-Hyd Tank Fill Pump
| 18***74 | Roller Group-Track-Single Flange | 1 |
| 25***27 | Wiring Group-Hydraulic Tank Fill Pump | 1 |
240-8943 Wiring Gp-Machine
| 10***85 | Seal Group-Duo-Cone | 2 |
| 13***15 | Shaft-Track Roller | 1 |
| 14***58 | Roller & Bearing As | 1 |
272-0084 Wiring Gp-Machine
| 14***33 | Seal Group-Duo Cone; (Duo Cone) (151page) | 2 |
| 16***31 | Ring; (Toric) | 2 |
| 17***97 | Collar; (Track Roller) | 2 |
Engine Arrangement
239-6187 Installation Ar-Engine
| 10***37 | Washer; (24.5x135x12-mm Thk) | 2 |
| 11***30 | Support As | 2 |
| 13***36 | Mount-Flexible | 2 |
272-0079 Installation Ar-Engine
| 27***79 | Installation Ar-Engine | 1 |
Frame And Body
316-6440 Box Gp-Battery
| 21***57 | Tilt Group-Cab Leveling | 1 |
| 22***37 | Cylinder & Lines Group-Tilt; -Cab Leveling | 1 |
| 22***38 | Lines Group-Travel Motor | 1 |
333-0597 Brace Gp
| 18***78 | Track Group | 2 |
| 22***05 | Roller Group-Track | 4 |
| 33***97 | Brace Group | 1 |
212-8004 Counterweight Gp
| 21***04 | Counterweight Group | 1 |
| 21***57 | Tilt Group-Cab Leveling | 1 |
| 22***37 | Cylinder & Lines Group-Tilt; -Cab Leveling | 1 |
276-8815 Counterweight Gp
| 18***78 | Track Group | 2 |
| 22***03 | Undercarriage Ar | 1 |
| 27***15 | Counterweight Group | 1 |
212-8001 Frame As-Upper
| 15***59 | Idler Group-Front | 1 |
| 15***69 | Guard Group-Track Guide | 1 |
| 19***04 | Cover | 2 |
272-0052 Frame Gp-Upper
| 15***34 | Track Group | 2 |
| 22***05 | Roller Group-Track | 4 |
| 27***52 | Frame Group-Upper | 1 |
212-8000 Frame Gp-Upper
| 15***59 | Idler Group-Front | 1 |
| 15***69 | Guard Group-Track Guide | 1 |
| 15***74 | Roller Ar-Track & Carrier | 1 |
224-9122 Gear & Bearing Gp-Swing
| 10***51 | Loom; (39 cm) | 0 |
| 10***01 | Kit; (Receptacle) (12-Pin) (Includes Receptacle As & Wedge) | 1 |
| 17***08 | Switch As-Limit | 10 |
227-6088 Gear & Bearing Gp-Swing
| 22***17 | Harness As-Operator Controls; (Joystick) | 1 |
| 22***88 | Gear & Bearing Group-Swing | 1 |
| 23***22 | Control Group-Handle; -Felling Head | 1 |
199-4476 Gear & Bearing Gp-Swing
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 19***76 | Gear & Bearing Group-Swing | 1 |
| 22***39 | Control Group-Hydraulic Pedal; (Travel) | 2 |
227-6087 Gear & Bearing Gp-Swing
| 17***08 | Switch As-Limit | 8 |
| 22***87 | Gear & Bearing Group-Swing | 1 |
199-4475 Gear & Bearing Gp-Swing
| 19***75 | Gear & Bearing Group-Swing | 1 |
| 2J***64 | Plug-Drain; (Hydraulic Filter Bypass) | 1 |
| 3G***73 | Spring; (Inner) | 1 |
199-4478 Gear & Bearing Gp-Swing
| 10***05 | Kit-Receptacle; (6-Pin)(Display Monitor Harness) | 1 |
| 19***78 | Gear & Bearing Group-Swing | 1 |
| 22***39 | Control Group-Hydraulic Pedal; (Travel) | 2 |
216-9865 Guard Gp-Radiator
| 14***54 | Elbow; (45) (-8/-8 Orb/Orfs) | 2 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 10 |
| 14***28 | Tee As-Orfs | 2 |
247-7641 Guard Gp-Radiator
| 10***96 | Bolt-Socket Head; (M10x1.5x50-mm) | 20 |
| 14***27 | Connector Group | 6 |
| 14***76 | Elbow As | 2 |
276-2108 Hood As
| 10***17 | Valve Group-Counterbalance; -Hood Tilt Cylinder | 1 |
| 11***15 | Clevis | 1 |
| 23***74 | Pin | 2 |
239-6216 Hood Gp
| 08***05 | Stop | 1 |
| 09***29 | Ring; (Retaining) | 2 |
| 09***31 | Seal-O-Ring; (Id=119.60mm) | 1 |
272-0078 Hood Gp
| 08***05 | Stop | 1 |
| 09***29 | Ring; (Retaining) | 2 |
| 09***31 | Seal-O-Ring; (Id=119.60mm) | 1 |
212-8019 Plate Gp-Frame
| 09***43 | Seal-Lip Type | 2 |
| 09***12 | Bearing-Sleeve | 1 |
| 16***09 | Seal As-Buffer | 1 |
280-1999 Step As
| 06***61 | Ring-Retaining | 4 |
| 15***37 | Bearing | 2 |
| 16***09 | Seal As-Buffer | 1 |
235-6512 Step Gp
| 08***05 | Stop | 1 |
| 09***29 | Ring; (Retaining) | 2 |
| 09***31 | Seal-O-Ring; (Id=119.60mm) | 1 |
217-9693 Tilt Gp-Hood
| 09***30 | Ring; (Retaining) | 2 |
| 09***31 | Ring - Retaining | 1 |
| 09***50 | Coupling-Pipe | 1 |
Fuel System
239-6181 Lines Gp-Fuel
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 17***91 | Bracket Assem. | 1 |
| 17***92 | Body Assem. | 1 |
282-4438 Lines Gp-Fuel
| 16***56 | Bracket; (Lamp Retaining) | 1 |
| 20***14 | Lens As; (Floodlight) | 1 |
| 23***30 | Body As; (Floodlight) | 1 |
272-0071 Tank Gp-Fuel
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***82 | Screw; (7.4x20-mm) | 2 |
| 16***56 | Bracket; (Lamp Retaining) | 1 |
Hydraulic System
3g-7232 Bypass Gp-Filter -Hydraulic Oil
| 14***53 | Elbow, 45,-6 Orb To-6 Orfs-Drum Clutch Port | 1 |
| 14***55 | Elbow As. | 1 |
| 14***64 | Elbow, 90°,-8 Orb /-8 Orfs | 1 |
239-6176 Coupling Gp-Pump
| 18***30 | Valve Group-Relief; -Swing Motor | 2 |
| 18***75 | Motor Group-Swing | 1 |
| 23***76 | Coupling Group-Pump | 1 |
177-2521 Cover Gp-Pump
| 09***00 | Seal-O-Ring (Id=33.70mm) | 2 |
| 09***33 | Seal-Lip Type | 1 |
| 09***11 | Pin; (Spring) | 2 |
171-2446 Cover Gp-Valve End
| 12***54 | Setscrew; (M12x1.75-Thd) | 1 |
| 12***13 | Seal; (Shaft) | 1 |
| 12***14 | Shim; (3-mm Thk) | 1 |
224-9037 Cylinder & Lines Gp-Tilt -Cab Leveling
| 00***70 | Nipple-Strainer To Flange | 1 |
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
282-3014 Cylinder & Mtg Gp-Boom
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
| 15***44 | Elbow Group | 1 |
| 20***66 | Pump & Motor Group; -Hydraulic Tank Fill | 1 |
327-8141 Cylinder & Mtg Gp-Boom
| 10***96 | Screen-Filter | 1 |
| 10***97 | Tube | 1 |
| 10***98 | Tube | 1 |
282-3152 Cylinder & Mtg Gp-Saw
| 15***58 | Flange | 1 |
| 15***59 | Hub | 1 |
| 15***43 | Coupling & Mtg Group-Pump | 1 |
282-3013 Cylinder & Mtg Gp-Stick
| 09***70 | Bolt-Socket Hd; (M12 X 1.75 X 45) | 4 |
| 11***49 | Fitting As; (Quick Disconnect) | 1 |
| 12***85 | Elbow 90 Degree | 1 |
282-3109 Cylinder & Mtg Gp-Stick & Saw -Harvester Head, Lh
| 08***01 | Plug As | 3 |
| 09***91 | Ball Bearing | 1 |
| 12***13 | Seal; (Shaft) | 1 |
248-6874 Cylinder Ar-Hydraulic -Boom, Stick
| 09***28 | Ring-Retaining; (External) | 1 |
| 17***91 | Plate; (2.6-mm Thk) | 1 |
| 17***92 | Plate; (2.65-mm Thk) | 1 |
217-9702 Cylinder Ar-Hydraulic -Boom, Stick
| 09***28 | Ring-Retaining; (External) | 1 |
| 17***87 | Shim; (3.3-mm Thk) | 1 |
| 17***88 | Shim; (3.4-mm Thk) | 1 |
217-9701 Cylinder Ar-Hydraulic -Boom, Stick, Saw Tilt
| 11***19 | Screw-Special; (M5x0.8x8-mm) | 14 |
| 12***29 | Plate-Control | 1 |
| 12***30 | Pin-Center | 1 |
322-3568 Cylinder Gp-Boom
| 09***25 | Seal-O-Ring (Id=89.60mm) | 3 |
| 09***16 | Seal-O-Ring (Id=109.40mm) | 2 |
| 14***63 | Seal As | 10 |
212-8040 Cylinder Gp-Hood Tilt
| 09***96 | Bolt; (M20x2.5-Thd) | 4 |
| 09***45 | Gauge Group-Sight; -Hydraulic Oil Level | 1 |
| 09***47 | Bolt; (M10x1.5x36-mm) | 2 |
251-8281 Cylinder Gp-Hood Tilt
| 09***96 | Bolt; (M20x2.5-Thd) | 4 |
| 09***45 | Gauge Group-Sight; -Hydraulic Oil Level | 1 |
| 09***47 | Bolt; (M10x1.5x36-mm) | 2 |
215-9097 Cylinder Gp-Hydraulic -Boom
| 09***43 | Retainer | 1 |
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 14***09 | Adapter As | 1 |
215-9092 Cylinder Gp-Stick -Boom
| 10***04 | Kit-Receptacle; (4-Pin)(Start Switch) | 1 |
| 14***15 | Hose As | 1 |
| 14***09 | Adapter As | 1 |
226-4970 Cylinder Gp-Stick
| 14***15 | Hose As | 1 |
| 14***09 | Adapter As | 1 |
| 14***36 | Adapter; (Straight) (-6 Orb X -6 Orfs) | 2 |
222-9149 Cylinder Gp-Tilt -Side, For Cab Leveling
| 11***60 | Union | 1 |
| 12***37 | Clip-Loop | 2 |
| 12***23 | Bracket Assem. | 1 |
282-9611 Cylinder Gp-Tilt -Rear, For Cab Leveling
| 22***31 | Valve Group-Control; -Travel | 1 |
| 22***40 | Valve Group-Control; -Travel | 2 |
| 22***41 | Valve Group-Control; -End Cover | 1 |
222-9150 Cylinder Gp-Tilt -Rear, For Cab Leveling
| 12***96 | Pin | 2 |
| 12***98 | Seat | 2 |
| 12***99 | Seat | 2 |
254-5457 Cylinder Gp-Tilt -Saw
| 09***56 | Setscrew-Socket | 1 |
| 10***04 | Seal-O-Ring | 1 |
| 16***67 | Dowel | 1 |
274-7480 Cylinder Gp-Tilt -Saw
| 19***94 | Poppet | 1 |
| 19***08 | Spring | 1 |
| 19***81 | Seat | 1 |
215-9052 Cylinder Gp-Tilt -Saw
| 11***45 | Hose As | 1 |
| 11***17 | Clip | 1 |
| 14***15 | Hose As | 1 |
217-9689 Drive Ar-Swing
| 21***89 | Drive Ar-Swing | 1 |
| 22***44 | Kit-Relief Valve; (Main, Load Sensing) | 1 |
| 22***46 | Kit-Valve | 1 |
220-8623 Drive Gp-Swing
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 16***43 | Valve Group-Relief; (Control Valve) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
220-8620 Drive Gp-Swing
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 16***43 | Valve Group-Relief; (Control Valve) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
201-7808 Drive Gp-Swing
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
| 17***47 | Kit-Spring; (Control Valve) | 1 |
199-4490 Drive Gp-Swing
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 16***43 | Valve Group-Relief; (Control Valve) | 2 |
191-2693 Drive Gp-Swing -Without Motor
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 16***40 | Valve Group-Relief; (Line) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
158-8987 Filter & Valve Gp-Pilot -Hydraulic Oil
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 15***87 | Filter & Valve Group-Pilot; -Hydraulic Oil | 1 |
289-7836 Filter & Valve Gp-Pilot -Hydraulic Oil
| 22***44 | Kit-Relief Valve; (Main, Load Sensing) | 1 |
| 22***50 | Kit-Control Valve; (Seal)(Control Valve) | 1 |
| 25***85 | Seal-O-Ring | 1 |
188-2084 Filter & Valve Gp-Pilot -Hydraulic Oil
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
289-8194 Filter Gp-Oil -Hydraulic, Case Drain
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 16***43 | Valve Group-Relief; (Control Valve) | 2 |
222-7092 Filter Gp-Oil -Hydraulic
| 22***92 | Filter Group-Oil; -Hydraulic | 1 |
| 22***41 | Valve Group-Control; -End Cover | 1 |
| 22***50 | Kit-Control Valve; (Seal)(Control Valve) | 1 |
126-2075 Filter Gp-Oil -Case Drain
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 12***75 | Filter Group-Oil; -Hyraulic Oil-Hydraulic, Case Drain | 1 |
| 16***43 | Valve Group-Relief; (Control Valve) | 2 |
227-0620 Gauge Gp-Sight -Hydraulic Oil Level
| 22***20 | Gauge Group-Sight; -Hydraulic Oil Level | 1 |
| 22***44 | Kit-Relief Valve; (Main, Load Sensing) | 1 |
| 22***50 | Kit-Control Valve; (Seal)(Control Valve) | 1 |
094-3245 Gauge Gp-Sight -Hydraulic Oil Level
| 09***45 | Gauge Group-Sight; -Hydraulic Oil Level | 1 |
| 09***41 | Bolt-Socket Head; (M4x0.7x10-mm) | 2 |
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
192-2892 Head Gp-Motor -Travel
| 19***92 | Head Group-Motor; -Travel | 1 |
| 22***50 | Kit-Control Valve; (Seal)(Control Valve) | 1 |
291-1126 Head Gp-Motor
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 16***43 | Valve Group-Relief; (Control Valve) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
270-4694 Head Gp-Pump -Main Hydraulic
| 09***45 | Bolt-Socket Head; (M6x1.00x55mm) | 2 |
| 16***43 | Valve Group-Relief; (Control Valve) | 2 |
| 17***46 | Cover Group-Valve End | 1 |
308-4488 Head Gp-Pump
| 09***83 | Ring-Back Up | 1 |
| 11***16 | Kit-Seal; (Counterbalance Valve) | 1 |
| 1S***47 | Seal 17.17 mm. (.676 In.) I.D. | 2 |
272-0057 Hydraulic Ar
| 22***32 | Valve Group-Control; -Inlet | 21 |
| 22***35 | Valve Group-Control; -Swing | 1 |
| 22***36 | Valve Group-Control; -Stick | 1 |
284-5616 Hydraulic Ar
| 22***33 | Valve Group-Control; -Accum Arms-Hf, Lo/Hi Flow-Hp-Grapple-Hf, High Flow-Hp | 2 |
| 22***34 | Valve Group-Control; -Felling Head Tilt | 1 |
| 22***35 | Valve Group-Control; -Swing | 1 |
282-3068 Hydraulic Ar-Harvester -Without Linkage
| 08***59 | Setscrew | 2 |
| 12***79 | Piston | 2 |
| 12***80 | Spring | 2 |
218-1919 Hydraulic Ar-Tilt
| 12***94 | Plug; (Break Off) | 5 |
| 12***17 | Plug | 1 |
| 15***85 | Dowel | 2 |
245-1969 Kit-Seal -Feed Reducer Plug
| 08***59 | Setscrew | 2 |
| 09***60 | Setscrew-Socket; (M6x1x6-mm) | 2 |
| 12***79 | Piston | 2 |
197-9885 Lever Gp-Control -Hydraulic Lockout
| 10***66 | Adapter | 2 |
| 19***85 | Lever Group-Control; -Hydraulic Lockout | 1 |
| 2M***80 | Seal--To Connector Pump Outlet | 2 |
167-7080 Lever Gp-Control -Hydraulic Lockout
| 09***98 | Seal-O-Ring (Id=29.40mm) | 1 |
| 16***80 | Lever Group-Control; -Hydraulic Lockout | 1 |
| 16***13 | Body As | 1 |
217-9706 Lines Gp-Boom
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 2 |
| 11***43 | Locknut; (5/16-18-Thd) | 2 |
| 16***71 | Kit-Seal; (Solenoid Valve) | 1 |
217-9705 Lines Gp-Boom -Felling Head
| 10***02 | Kit-Receptacle; (2-Pin)(Engine Sensor Wiring Harness) | 1 |
| 11***43 | Locknut; (5/16-18-Thd) | 2 |
| 15***38 | Cartridge Assem. | 1 |
253-2603 Lines Gp-Boom -Harvester Head
| 17***85 | Valve Group-Solenoid | 1 |
| 22***64 | Cartridge As-Valve | 2 |
| 23***36 | Seal Kit; (Includes Seals And Rings) | 1 |
306-9318 Lines Gp-Control -Crossover, Travel
| 03***21 | Ring-Back-Up | 1 |
| 15***40 | Valve Group-Solenoid; -Reversing Fan, Ride Control | 1 |
| 16***54 | Seal-O-Ring | 1 |
282-3064 Lines Gp-Front -Boom Cylinder, Harvester Head
| 21***11 | Boom Group | 1 |
| 21***12 | Stick Group; -Felling Head | 1 |
| 21***14 | Linkage Group-Felling Head | 1 |
282-3101 Lines Gp-Front -Boom, Stick
| 09***83 | Shim (1.0 mm Thick) | 4 |
| 09***15 | Shim (2.0 mm Thick) | 4 |
| 09***34 | Shim; (T=69.85mm) | 2 |
282-3102 Lines Gp-Front -Boom, Felling Head
| 10***57 | Washer; (22x76.2x6-mm Thk) | 1 |
| 21***98 | Plate As | 1 |
| 21***99 | Stick As | 1 |
217-9708 Lines Gp-Front
| 09***83 | Shim (1.0 mm Thick) | 2 |
| 09***90 | Shim (1.0 mm Thick) | 2 |
| 09***15 | Shim (2.0 mm Thick) | 2 |
282-3065 Lines Gp-Front -Boom, Harvester Head
| 21***11 | Boom Group | 1 |
| 21***16 | Stick Group; -Harvester Head | 1 |
| 21***98 | Valve & Mtg Group-Main Control; -5-Bank, Harvester Head | 1 |
217-9707 Lines Gp-Front -Boom, Felling Head
| 09***83 | Shim (1.0 mm Thick) | 2 |
| 09***90 | Shim (1.0 mm Thick) | 2 |
| 09***15 | Shim (2.0 mm Thick) | 2 |
253-2604 Lines Gp-Front -Boom, Harvester Head
| 24***33 | Hose As | 1 |
| 24***34 | Hose As | 1 |
| 24***35 | Hose As | 1 |
282-3108 Lines Gp-Motor
| 09***36 | Screw; (Machine) (M5x0.8x10mm) | 1 |
| 09***15 | Ring-Retaining | 1 |
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 1 |
285-0933 Lines Gp-Motor
| 17***62 | Duct | 1 |
| 17***63 | Duct As | 1 |
| 18***09 | Duct | 1 |
217-9694 Lines Gp-Pilot
| 17***63 | Duct As | 1 |
| 19***05 | Gasket | 1 |
| 21***94 | Lines Group-Pilot | 1 |
272-0058 Lines Gp-Pilot
| 16***57 | Support Group-Seat; Support Gp - Seat | 1 |
| 18***86 | Seat Group-Suspension; -Mechanical Suspension | 1 |
| 19***13 | Duct Group-Cab Air | 1 |
306-9314 Lines Gp-Pilot -Power Shift Option
| 19***20 | Door Group-Cab | 1 |
| 19***56 | Window Group-Cab | 1 |
| 22***19 | Rops Group-Enclosed | 1 |
217-9691 Lines Gp-Pump
| 21***91 | Lines Group-Pump | 1 |
| 23***74 | Door Group-Access; -Air Filter | 1 |
| 23***12 | Door Group-Cab | 1 |
282-3071 Lines Gp-Pump
| 11***26 | Screw; (Pan Head) (10-16x0.63 In) | 8 |
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 5 |
| 15***99 | Nut | 8 |
275-7941 Lines Gp-Pump
| 18***19 | Screw-Hex Flange; (M5x2.24x14-mm) | 6 |
| 18***56 | Switch As-Pressure; (Air Conditioner, Low Side) | 1 |
| 18***57 | Switch As-Pressure; (High Discharge Cut Off) | 1 |
217-9692 Lines Gp-Return
| 15***75 | Ladder Clip | 2 |
| 16***59 | Console Group-Operator; -Lh | 1 |
| 17***08 | Cushion As-Arm | 1 |
253-2607 Lines Gp-Saw
| 13***02 | Washer-Nylon; (0.53x1.53x0.125-In Thk) | 2 |
| 16***49 | Bolt; (M12x1.75x60-mm) | 4 |
| 21***97 | Door As-Access; (Cab Roof) | 1 |
217-9709 Lines Gp-Saw
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 5 |
| 17***25 | Screw-Tapping; (M5x0.8-Thd) | 3 |
| 17***30 | Ashtray | 1 |
256-0350 Lines Gp-Saw
| 03***72 | Pin-Clevis | 2 |
| 09***55 | Clip | 2 |
| 09***87 | Channel-Trim | 0 |
217-9703 Lines Gp-Stick
| 10***71 | Clevis | 1 |
| 11***10 | Stud-Ball | 2 |
| 12***70 | Capscrew; (Button Hd) (M8x1.25x20) (G10.9) | 8 |
253-2602 Lines Gp-Stick
| 24***20 | Plate | 2 |
| 24***34 | Angle As | 1 |
| 24***36 | Angle As | 1 |
217-9704 Lines Gp-Stick
| 10***67 | Washer-Hard; (7.2x25x2-mm Thk) | 3 |
| 11***27 | Screw-Machine; (M6x1x30-mm) | 3 |
| 19***21 | Duct | 1 |
224-9038 Lines Gp-Travel Motor
| 22***38 | Lines Group-Travel Motor | 1 |
| 25***48 | Window; (Center) | 1 |
| 25***50 | Window; (Left) | 1 |
241-3278 Lines Gp-Vent -Coolant
| 1K***50 | Spring | 1 |
| 24***78 | Lines Group-Vent; -Coolant | 1 |
| 25***84 | Plate | 1 |
206-1513 Motor & Mtg Gp-Swing
| 19***90 | Angle | 1 |
| 19***91 | Guard As | 1 |
| 20***13 | Motor & Mtg Group-Swing | 1 |
281-6404 Motor & Mtg Gp-Swing
| 13***02 | Washer-Nylon; (0.53x1.53x0.125-In Thk) | 2 |
| 16***49 | Bolt; (M12x1.75x60-mm) | 4 |
| 21***22 | Knob | 4 |
188-4175 Motor Gp-Swing
| 10***55 | Cover-Speaker | 2 |
| 11***19 | Bolt-Socket Head; (M4x0.7x25-mm) | 8 |
| 11***54 | Cover | 1 |
179-9775 Motor Gp-Swing
| 17***12 | Cover | 1 |
| 17***13 | Housing | 1 |
| 17***27 | Actuator | 1 |
334-9978 Motor Gp-Swing
| 25***25 | Foam | 1 |
| 26***60 | Foam | 1 |
| 26***61 | Foam | 1 |
334-9971 Motor Gp-Swing
| 10***55 | Cover-Speaker | 2 |
| 11***19 | Bolt-Socket Head; (M4x0.7x25-mm) | 8 |
| 11***54 | Cover | 1 |
279-9874 Motor Gp-Travel
| 12***98 | Bracket Assem. | 1 |
| 16***73 | Valve Group-Shutoff | 1 |
| 17***02 | Receiver Dryer As; (Refrigerant) | 1 |
236-1237 Motor Gp-Travel
| 12***98 | Bracket Assem. | 1 |
| 16***73 | Valve Group-Shutoff | 1 |
| 17***02 | Receiver Dryer As; (Refrigerant) | 1 |
206-6508 Plug Gp-Hydraulic Lines
| 20***08 | Plug Group-Hydraulic Lines | 1 |
| 22***90 | Control & Mtg Group-Joystick; -Felling Head | 1 |
| 23***56 | Support Group-Seat | 1 |
217-9690 Pump & Lines Gp-Hyd Tank Fill
| 09***24 | Plug-Button | 1 |
| 11***27 | Screw-Machine; (M6x1x30-mm) | 2 |
| 11***11 | Socket-Auxiliary Power; (12-Volt)(Power Port) | 2 |
205-5266 Pump & Motor Gp -Hydraulic Tank Fill
| 12***67 | Screw; (M6x1x8-mm) | 3 |
| 13***13 | Bolt; (M10x1.5x16-mm) | 2 |
| 20***66 | Pump & Motor Group; -Hydraulic Tank Fill | 1 |
212-8039 Pump & Motor Gp-Hood Tilt
| 13***90 | Bushing; (Radio Mount) | 1 |
| 16***18 | Kit-Receptacle; (8-Pin) | 1 |
| 20***28 | Harness As-Radio; (Fm) | 1 |
308-0095 Pump & Mtg Gp-Main Hydraulic
| 16***03 | Suspension Group-Seat | 1 |
| 16***06 | Seat Group | 1 |
| 17***65 | Screw-Truss Head | 4 |
222-3097 Pump & Mtg Gp-Main Hydraulic -Harvester Head
| 22***97 | Pump & Mtg Group-Main Hydraulic; -Harvester Head | 1 |
| 8S***34 | Locknut; (Flange) (7/16-20 Thd) | 1 |
| 8S***24 | Bolt 57.15 mm(2.25 In.) Long | 1 |
217-9700 Pump & Mtg Gp-Main Hydraulic -Felling Head
| 13***90 | Bushing; (Radio Mount) | 1 |
| 14***81 | Knob-Select; (Radio) | 1 |
| 16***25 | Radio Group; (Am/Fm Cassette, Cd Changer)(Deluxe W/ Remote Capabilities) | 1 |
283-2529 Pump & Mtg Gp-Saw
| 17***59 | Handle; (Lumbar Support Adjuster) | 1 |
| 22***77 | Suspension Group-Seat; -Mechanical | 1 |
| 22***90 | Seat Group; -High Back, Tilt | 1 |
308-0094 Pump Gp-Piston -Main Hydraulic
| 17***54 | Cover Group-Seat; (Suspension) | 1 |
| 17***55 | Kit-Seat Adjuster; (Upper) | 1 |
| 17***56 | Kit-Seat Adjuster; (Lower) | 1 |
268-6729 Pump Gp-Piston -Main Hydraulic, Felling Head
| 16***43 | Support As; (Seat) | 1 |
| 26***29 | Pump Group-Piston; -Main Hydraulic, Felling Head | 1 |
| 7X***29 | Washer; (11x25x3-mm Thk) | 4 |
217-9699 Pump Gp-Piston -Main Hydraulic, Harvester Head
| 21***99 | Pump Group-Piston; -Main Hydraulic, Harvester Head | 1 |
| 23***20 | Seat Belt Group; -Retractable, 76-mm | 1 |
| 24***03 | Seat & Mounting Group; -High Back, Tilt | 1 |
268-8259 Pump Gp-Piston
| 23***57 | Support As | 1 |
| 26***59 | Pump Group-Piston; -Saw | 1 |
| 7X***29 | Washer; (11x25x3-mm Thk) | 4 |
218-2977 Pump Gp-Piston -Saw
| 16***81 | Seat Group | 1 |
| 20***36 | Seat Belt Group; -Retractable, . Stand | 1 |
| 21***77 | Pump Group-Piston; -Saw | 1 |
190-8121 Rotating Gp-Motor -Travel
| 14***21 | Kit-Clip; (Seat) | 1 |
| 19***21 | Rotating Group-Motor; -Travel | 1 |
| 24***68 | Cover As | 1 |
191-0883 Rotating Gp-Motor -Travel
| 19***83 | Rotating Group-Motor; -Travel | 1 |
| 19***99 | Screw-Button Head; (M8x1.25x20-mm) | 2 |
| 20***80 | Cylinder-Damper | 1 |
283-5979 Rotating Gp-Pump
| 19***40 | Window Group-Cab; -Front | 1 |
| 19***92 | Window Group-Cab; -Lh | 1 |
| 19***21 | Window-Rh | 1 |
216-0028 Rotating Gp-Pump
| 09***35 | Screw; (Machine) (M5x0.8x8mm) | 2 |
| 10***39 | Support-Filter | 1 |
| 13***45 | Stop-Rubber | 4 |
283-5977 Rotating Gp-Pump
| 13***30 | Hinge-Lh | 2 |
| 15***15 | Gasket | 1 |
| 19***87 | Frame As-Lower | 1 |
216-0034 Rotating Gp-Pump -Hydraulic
| 12***35 | Screw; (Truss Head) (M6x1x13mm) | 4 |
| 21***34 | Rotating Group-Pump; -Hydraulic-Main Hydraulic | 1 |
| 22***64 | Handle As | 1 |
216-0035 Rotating Gp-Pump -Hydraulic
| 14***04 | Screw-Button Head; (M8x1.25x35-mm) | 4 |
| 16***16 | Spacer; (10x16x20-mm Thk) | 4 |
| 19***45 | Window | 1 |
283-5978 Rotating Gp-Pump
| 19***92 | Window Group-Cab; -Lh | 1 |
| 19***21 | Window-Rh | 1 |
| 19***22 | Window-Rear | 1 |
191-0886 Shaft Gp-Hydraulic Motor
| 19***86 | Shaft Group-Hydraulic Motor | 1 |
| 23***07 | Window; (Rear) | 1 |
| 23***53 | Window; (Rear Quarter, Left Side) | 2 |
295-0133 Swivel Gp
| 19***60 | Window-Front | 1 |
| 19***63 | Plate | 1 |
| 19***99 | Screw-Button Head; (M8x1.25x20-mm) | 14 |
224-9040 Swivel Gp -With Tilt Function
| 22***40 | Swivel Group; -With Tilt Function | 1 |
| 24***34 | Plate | 2 |
| 24***35 | Plate | 1 |
239-6217 Tank Gp-Hydraulic & Fuel
| 23***17 | Tank Group-Hydraulic & Fuel | 1 |
272-0106 Tank Gp-Hydraulic & Fuel
| 27***06 | Tank Group-Hydraulic & Fuel | 1 |
306-9323 Tube Gp-Diffuser -Hydraulic Tank
| 30***23 | Tube Group-Diffuser; -Hydraulic Tank | 1 |
217-9695 Valve & Lines Gp-Travel Cont -With Tilt Function
| 11***95 | Film-Instruction; (Air Conditioner) | 1 |
| 12***80 | Film-Instruction; (Hydraulic Tank Oil Drain) | 1 |
| 13***59 | Plate-Identification; (Engine Stop, Run) | 1 |
256-0349 Valve & Mtg Gp-Main Control -7-Bank
| 25***49 | Valve & Mtg Group-Main Control; -7-Bank | 1 |
285-2268 Valve & Mtg Gp-Main Control -7-Bank
| 28***68 | Inlet Manifold, Valve & Mtg Group-Main Control; -9-Bank | 1 |
217-9697 Valve & Mtg Gp-Main Control -7-Bank
| 21***97 | Valve & Mtg Group-Main Control; -7-Bank | 1 |
217-9698 Valve & Mtg Gp-Main Control -5-Bank, Harvester Head
| 21***98 | Valve & Mtg Group-Main Control; -5-Bank, Harvester Head | 1 |
328-1689 Valve Gp-Bank 7
| 32***89 | Valve Group-Bank 7 | 1 |
192-3284 Valve Gp-Counterbalance -Travel Motor
| 19***84 | Valve Group-Brake; -Travel Motor | 1 |
194-6973 Valve Gp-Brake -Pressure Release
| 19***73 | Valve Group-Brake; -Pressure Release | 1 |
192-3293 Valve Gp-Check & Relief -Travel Motor
| 19***93 | Valve Group-Check & Relief; -Travel Motor | 1 |
227-2141 Valve Gp-Control -End Cover
| 22***41 | Valve Group-Control; -End Cover | 1 |
229-6681 Valve Gp-Control -Forward, Side Leveling
| 22***81 | Valve Group-Control; -Forward, Side Leveling | 1 |
227-2140 Valve Gp-Control -Travel
| 22***40 | Valve Group-Control; -Travel | 1 |
227-2134 Valve Gp-Control -Felling Head Tilt
| 22***34 | Valve Group-Control; -Felling Head Tilt | 1 |
338-1091 Valve Gp-Control
| 33***91 | Valve Group-Control; -Head Tilt-Hf, Blank-Hp | 1 |
227-2137 Valve Gp-Control -Felling Head Lateral Tilt
| 22***37 | Valve Group-Control; -Felling Head Lateral Tilt | 1 |
256-0520 Valve Gp-Control -Head Tilt-Hf, Blank-Hp
| 25***20 | Valve Group-Control; -Head Tilt-Hf, Blank-Hp | 1 |
218-8377 Valve Gp-Control -Travel, 4-Bank, With Tilt Function
| 21***77 | Valve Group-Control; -Travel, 4-Bank, With Tilt Function | 1 |
227-2135 Valve Gp-Control -Swing
| 22***35 | Valve Group-Control; -Swing | 1 |
242-4240 Valve Gp-Control -Intermittent Saw, 2-Bank
| 24***40 | Valve Group-Control; -Intermittent Saw, 2-Bank | 1 |
247-7010 Valve Gp-Control -Saw Motor Control
| 24***10 | Valve Group-Control; -Saw Motor Control | 1 |
248-5414 Valve Gp-Control -End Cover
| 24***14 | Valve Group-Control; -End Cover | 1 |
244-7364 Valve Gp-Control -Lateral Tilt-Hf, Rotator-Hp
| 24***64 | Valve Group-Control; -Lateral Tilt-Hf, Rotator-Hp | 1 |
227-2139 Valve Gp-Control -Rotator
| 22***39 | Valve Group-Control; -Rotator | 1 |
234-0587 Valve Gp-Control -Boom
| 23***87 | Valve Group-Control; -Boom | 1 |
227-2133 Valve Gp-Control -Accum Arms-Hf, Lo/Hi Flow-Hp-Grapple-Hf, High Flow-Hp
| 22***33 | Valve Group-Control; -Accum Arms-Hf, Lo/Hi Flow-Hp-Grapple-Hf, High Flow-Hp | 1 |
227-2136 Valve Gp-Control -Stick
| 22***36 | Valve Group-Control; -Stick | 1 |
247-9847 Valve Gp-Control -Inlet
| 24***47 | Valve Group-Control; -Inlet | 1 |
325-4351 Valve Gp-Control -Boom
| 32***51 | Valve Group-Control; -Boom | 1 |
338-1090 Valve Gp-Control -Boom
| 33***90 | Valve Group-Control; -Boom | 1 |
227-2131 Valve Gp-Control -Travel
| 22***31 | Valve Group-Control; -Travel | 1 |
227-2138 Valve Gp-Control -Extension
| 22***38 | Valve Group-Control; -Extension | 1 |
244-7363 Valve Gp-Control
| 24***63 | Valve Group-Control; -Stick | 1 |
234-0586 Valve Gp-Control -Inlet
| 23***86 | Valve Group-Control; -Inlet | 1 |
227-2132 Valve Gp-Control -Inlet
| 22***32 | Valve Group-Control; -Inlet | 1 |
105-8117 Valve Gp-Counterbalance -Hood Tilt Cylinder
| 10***17 | Valve Group-Counterbalance; -Hood Tilt Cylinder | 1 |
291-1122 Valve Gp-Flow Control
| 29***22 | Valve Group-Flow Control; -Travel Motor | 1 |
256-0500 Valve Gp-Main Control -7-Bank
| 25***00 | Valve Group-Main Control; -7-Bank | 1 |
338-1089 Valve Gp-Main Control
| 33***89 | Valve Group-Main Control; -7-Bank | 1 |
218-8378 Valve Gp-Main Control -Harvester Head, 5-Bank
| 21***78 | Valve Group-Main Control; -Harvester Head, 5-Bank | 1 |
218-8379 Valve Gp-Main Control -7-Bank
| 21***79 | Valve Group-Main Control; -7-Bank | 1 |
218-1811 Valve Gp-Manifold & Reducing -Pilot Oil
| 21***11 | Valve Group-Manifold & Reducing; -Pilot Oil | 1 |
270-3521 Valve Gp-Pump Control -Pressure Compensator-Main Hydraulic
| 27***21 | Valve Group-Pump Control; -Pressure Compensator-Main Hydraulic | 1 |
308-4489 Valve Gp-Pump Control -Pressure Compensator
| 30***89 | Valve Group-Pump Control; -Pressure Compensator-Main Hydraulic | 1 |
198-3811 Valve Gp-Pump Control -Pressure Compensator-Main Hydraulic
| 19***11 | Valve Group-Pump Control; -Pressure Compensator-Main Hydraulic | 1 |
319-7774 Valve Gp-Regeneration
| 31***74 | Valve Group-Regeneration | 1 |
184-3830 Valve Gp-Relief -Swing Motor
| 18***30 | Valve Group-Relief; -Swing Motor | 1 |
167-1555 Valve Gp-Selector & Press Cont -Boom
| 16***55 | Valve Group-Selector & Press Cont; -Pilot Oil Pressure | 1 |
276-9072 Valve Gp-Shuttle
| 27***72 | Valve Group-Shuttle; -Signal | 1 |
315-4412 Valve Gp-Solenoid
| 31***12 | Valve Group-Solenoid; -Fine Swing | 1 |
195-3739 Valve Gp-Solenoid -Pump Control
| 19***39 | Valve Group-Solenoid; -Pressure Reducing | 1 |
152-8340 Valve Gp-Solenoid
| 15***40 | Valve Group-Solenoid; -Reversing Fan, Ride Control | 1 |
116-3526 Valve Gp-Solenoid
| 11***26 | Valve Group-Solenoid; -Swing Cushion | 1 |
171-3685 Valve Gp-Solenoid
| 17***85 | Valve Group-Solenoid | 1 |
277-8876 Valve Gp-Solenoid
| 27***76 | Valve Group-Solenoid; -Reversing Fan 1 | 1 |
3e-9205 Valve Gp-Solenoid
| 3E***05 | Valve Group-Solenoid; -Variable Fan Speed | 1 |
222-5781 Valve Gp-Solenoid & Manifold -Disc Saw
| 22***81 | Valve Group-Solenoid & Manifold; -Disc Saw | 1 |
196-5862 Valve Gp-Solenoid & Manifold -Pump Torque Limiter Control
| 19***62 | Valve Group-Solenoid & Manifold; -Pilot Lines-Proportional Reducing | 1 |
279-6518 Valve Gp-Solenoid & Manifold -Pilot Oil
| 27***18 | Valve Group-Solenoid & Manifold; -Pilot Oil-Reversing Fan | 1 |
274-8742 Valve Gp-Solenoid & Manifold -Pilot Oil
| 27***42 | Valve Group-Solenoid & Manifold; -Pilot Oil-Reversing Fan | 1 |
222-5811 Valve Gp-Solenoid & Manifold -Load Sensing
| 22***11 | Valve Group-Solenoid & Manifold; -Load Sensing | 1 |
158-9090 Valve Gp-Swing Cushion -Fine Swing
| 15***90 | Valve Group-Swing Cushion; -Fine Swing | 1 |
322-8716 Valve Gp-Swing Cushion
| 32***16 | Valve Group-Swing Cushion; -Fine Swing | 1 |
Implements
212-8011 Boom Gp
| 21***11 | Boom Group | 1 |
348-7173 Boom Gp
| 34***73 | Boom Group | 1 |
226-5001 Boom Gp
| 22***01 | Boom Group | 1 |
218-1917 Lines Gp-Grease -Boom, Stick
| 21***17 | Lines Group-Grease; -Boom, Stick | 1 |
253-2605 Lines Gp-Grease -Boom, Stick
| 25***05 | Lines Group-Grease; -Boom, Stick | 1 |
218-1918 Lines Gp-Grease -Boom
| 21***18 | Lines Group-Grease; -Boom | 1 |
212-8010 Linkage Ar-Felling Head
| 21***10 | Linkage Ar-Felling Head | 1 |
282-3069 Linkage Ar-Felling Head
| 28***69 | Linkage Ar-Felling Head | 1 |
252-8713 Linkage Ar-Harvester Head
| 25***13 | Linkage Ar-Harvester Head | 1 |
282-3012 Linkage Ar-Harvester Head
| 28***12 | Linkage Ar-Harvester Head | 1 |
218-2974 Linkage Ar-Harvester Head
| 21***74 | Linkage Ar-Harvester Head | 1 |
284-5617 Linkage Ar-Intermittent Saw
| 28***17 | Linkage Ar-Intermittent Saw | 1 |
252-8717 Linkage Ar-Intermittent Saw
| 25***17 | Linkage Ar-Intermittent Saw | 1 |
212-8014 Linkage Gp-Felling Head
| 21***14 | Linkage Group-Felling Head | 1 |
212-7999 Stick As
| 21***99 | Stick As | 1 |
212-8016 Stick Gp -Harvester Head
| 21***16 | Stick Group; -Harvester Head | 1 |
212-8012 Stick Gp -Felling Head
| 21***12 | Stick Group; -Felling Head | 1 |
226-5002 Stick Gp -Harvester Head
| 22***02 | Stick Group; -Harvester Head | 1 |
347-6972 Stick Gp
| 34***72 | Stick Group | 1 |
Lubrication System
240-7899 Valve Gp-Fluid Sampling -Coolant
| 10***56 | Plug; (Switch) | 1 |
| 11***73 | Bolt-12 Point Head; (M10x1.5x35-mm) | 4 |
| 13***40 | Spider As-Fan; (8-Blade) | 1 |
Machine Arrangement
239-6180 Chassis Ar
| 21***00 | Frame Group-Upper | 1 |
| 21***04 | Counterweight Group | 1 |
| 21***07 | Mounting Group-Cab | 1 |
272-0077 Chassis Ar
| 21***04 | Counterweight Group | 1 |
| 23***12 | Step Group | 1 |
| 23***81 | Lines Group-Fuel | 1 |
319-6601 Cold Weather Ar
| 21***01 | Cab Ar-Enclosed Rops | 1 |
| 21***19 | Hydraulic Ar-Tilt | 1 |
| 21***84 | Undercarriage Ar; -Tilting | 1 |
272-0076 Common Ar
| 15***73 | Plug As | 1 |
| 16***81 | Plug As | 14 |
| 21***92 | Cylinder Group-Stick; -Boom | 1 |
240-7171 Common Ar
| 21***19 | Hydraulic Ar-Tilt | 1 |
| 21***84 | Undercarriage Ar; -Tilting | 1 |
| 23***04 | Operator Ar | 1 |
242-5335 Conversion Ar-Machine -Without Front Linkage
| 21***23 | Bracket As | 1 |
| 24***35 | Conversion Ar-Machine; -Without Front Linkage | 1 |
| 4W***03 | Cup-Roller Bearing | 2 |
Operator Station
245-7896 Adjuster Gp-Seat -Lower Slide
| 24***96 | Adjuster Group-Seat; -Lower Slide | 1 |
178-5524 Adjustment Gp-Console
| 17***24 | Adjustment Group-Console | 1 |
243-6303 Air Conditioner & Mounting Gp
| 24***03 | Air Conditioner & Mounting Group | 1 |
197-4107 Air Conditioner & Mounting Gp
| 19***07 | Air Conditioner & Mounting Group | 1 |
250-0398 Air Conditioner Gp
| 25***98 | Air Conditioner Group | 1 |
238-1027 Air Conditioner Gp
| 23***27 | Air Conditioner Group | 1 |
243-6304 Air Conditioner Gp
| 24***04 | Air Conditioner Group | 1 |
199-3160 Air Conditioner Gp
| 19***60 | Air Conditioner Group | 1 |
234-6606 Armrest Gp -Rh
| 23***06 | Armrest Group; -Rh | 1 |
259-7347 Armrest Gp -Lh
| 25***47 | Armrest Group; -Lh | 1 |
259-7346 Armrest Gp -Rh
| 25***46 | Armrest Group; -Rh | 1 |
234-6607 Armrest Gp -Lh
| 23***07 | Armrest Group; -Lh | 1 |
213-2401 Cab Ar-Enclosed Rops
| 21***01 | Cab Ar-Enclosed Rops | 1 |
217-2440 Cab Gp-Enclosed Rops
| 21***40 | Cab Group-Enclosed Rops | 1 |
238-5010 Cab Gp-Enclosed Rops
| 23***10 | Cab Group-Enclosed Rops | 1 |
238-5013 Cab Gp-Enclosed Rops
| 23***13 | Cab Group-Enclosed Rops | 1 |
222-5420 Cab Gp-Enclosed Rops
| 22***20 | Cab Group-Enclosed Rops | 1 |
199-3159 Case Gp-Air Conditioner
| 19***59 | Case Group-Air Conditioner | 1 |
246-7154 Case Gp-Air Conditioner
| 24***54 | Case Group-Air Conditioner | 1 |
177-6729 Case Gp-Heater & Evaporator
| 17***29 | Case Group-Heater & Evaporator | 1 |
199-3157 Case Gp-Heater & Evaporator
| 19***57 | Case Group-Heater & Evaporator | 1 |
106-5122 Compressor Gp-Refrigerant
| 10***22 | Compressor Group-Refrigerant; -Air Conditioner | 1 |
243-5686 Console Gp-Operator
| 24***86 | Console Group-Operator | 1 |
245-7924 Console Gp-Operator -Rh
| 24***24 | Console Group-Operator; -Rh | 1 |
204-6974 Console Gp-Operator -Rh
| 20***74 | Console Group-Operator; -Rh | 1 |
259-7348 Console Gp-Operator -Rh
| 25***48 | Console Group-Operator; -Rh | 1 |
161-3759 Console Gp-Operator -Lh
| 16***59 | Console Group-Operator; -Lh | 1 |
223-0052 Console Gp-Operator
| 22***52 | Console Group-Operator | 1 |
259-7349 Console Gp-Operator -Lh
| 25***49 | Console Group-Operator; -Lh | 1 |
245-7923 Console Gp-Operator -Lh
| 24***23 | Console Group-Operator; -Lh | 1 |
223-0671 Control & Mtg Gp-Joystick -Harvester Head
| 22***71 | Control & Mtg Group-Joystick; -Harvester Head | 1 |
224-4990 Control & Mtg Gp-Joystick -Felling Head
| 22***90 | Control & Mtg Group-Joystick; -Felling Head | 1 |
238-8167 Control & Mtg Gp-Pedal
| 23***67 | Control & Mtg Group-Pedal | 1 |
223-0716 Control Gp-Handle -Harvester Head, Rh
| 22***16 | Control Group-Handle; -Harvester Head, Rh | 1 |
223-0715 Control Gp-Handle -Harvester Head, Lh
| 22***15 | Control Group-Handle; -Harvester Head, Lh | 1 |
235-4122 Control Gp-Handle -Felling Head
| 23***22 | Control Group-Handle; -Felling Head | 1 |
231-2613 Control Gp-Hydraulic Pedal
| 23***13 | Control Group-Hydraulic Pedal | 1 |
283-2393 Control Gp-Joystick -Felling Head
| 28***93 | Control Group-Joystick; -Felling Head | 1 |
272-7088 Control Gp-Joystick -Harvester Head, Lh
| 27***88 | Control Group-Joystick; -Harvester Head, Lh | 1 |
272-7087 Control Gp-Joystick -Felling Head
| 27***87 | Control Group-Joystick; -Felling Head | 1 |
272-7089 Control Gp-Joystick -Harvester Head, Rh
| 27***89 | Control Group-Joystick; -Harvester Head, Rh | 1 |
283-2395 Control Gp-Joystick -Harvester Head, Rh
| 28***95 | Control Group-Joystick; -Harvester Head, Rh | 1 |
283-2394 Control Gp-Joystick -Harvester Head, Lh
| 28***94 | Control Group-Joystick; -Harvester Head, Lh | 1 |
272-0446 Control Gp-Monitor -Iqan
| 27***46 | Control Group-Monitor; -Iqan | 1 |
241-4146 Control Gp-Monitor -Iqan
| 24***46 | Control Group-Monitor; -Iqan | 1 |
298-1567 Door Gp-Access -Cab Roof
| 29***67 | Door Group-Access; -Cab Roof | 1 |
256-7304 Door Gp-Access -Cab Roof
| 25***04 | Door Group-Access; -Cab Roof | 1 |
237-2374 Door Gp-Access -Air Filter
| 23***74 | Door Group-Access; -Air Filter | 1 |
256-1296 Door Gp-Access -Cab Roof
| 25***96 | Door Group-Access; -Cab Roof | 1 |
212-4540 Door Gp-Access -Cab Roof
| 21***40 | Door Group-Access; -Cab Roof | 1 |
254-9336 Door Gp-Cab
| 25***36 | Door Group-Cab | 1 |
197-4720 Door Gp-Cab
| 19***20 | Door Group-Cab | 1 |
238-5012 Door Gp-Cab
| 23***12 | Door Group-Cab | 1 |
239-1378 Duct Gp-Cab Air
| 23***78 | Duct Group-Air | 1 |
197-2913 Duct Gp-Cab Air
| 19***13 | Duct Group-Cab Air | 1 |
199-5134 Duct Gp-Cab Air
| 19***34 | Duct Group-Cab Air | 1 |
250-0861 Frame Gp-Window
| 25***61 | Frame Group-Window | 1 |
258-0699 Frame Gp-Window -Thick Glass
| 25***99 | Frame Group-Window; -Thick Glass | 1 |
239-6218 Guard Gp-Cab
| 23***18 | Guard Group-Cab | 1 |
261-1093 Guard Gp-Cab
| 26***93 | Guard Group-Cab | 1 |
197-9880 Guard Gp-Window
| 19***80 | Guard Group-Window | 1 |
213-0235 Handle Gp-Door -Cab
| 21***35 | Handle Group-Door; -Cab | 1 |
323-2220 Hatch Gp-Roof
| 32***20 | Hatch Group-Roof | 1 |
253-9594 Hatch Gp-Roof
| 25***94 | Hatch Group-Roof | 1 |
202-9627 Housing Gp-Air Conditioner -Outlet Air
| 20***27 | Housing Group-Air Conditioner; -Outlet Air | 1 |
199-3156 Housing Gp-Air Conditioner -Inlet Air
| 19***56 | Housing Group-Air Conditioner; -Inlet Air | 1 |
251-6761 Housing Gp-Air Conditioner -Outlet Air
| 25***61 | Housing Group-Air Conditioner; -Outlet Air | 1 |
238-5024 Installation Gp-Radio
| 23***24 | Installation Group-Radio | 1 |
220-8420 Installation Gp-Radio
| 22***20 | Installation Group-Radio | 1 |
302-7455 Liner Gp-Cab
| 30***55 | Liner Group-Cab | 1 |
263-2766 Liner Gp-Cab
| 26***66 | Liner Group-Cab | 1 |
261-1094 Lines Gp-Air Conditioner
| 26***94 | Lines Group-Air Conditioner | 1 |
239-6184 Lines Gp-Air Conditioner
| 23***84 | Lines Group-Air Conditioner | 1 |
212-8007 Mounting Gp-Cab
| 21***07 | Mounting Group-Cab | 1 |
251-6137 Mounting Gp-Cab
| 25***37 | Mounting Group-Cab | 1 |
238-5004 Operator Ar
| 23***04 | Operator Ar | 1 |
222-5418 Panel Gp-Instrument
| 22***18 | Panel Group-Instrument | 1 |
238-5020 Platform Gp-Operator
| 23***20 | Platform Group-Operator | 1 |
222-5412 Platform Gp-Operator
| 22***12 | Platform Group-Operator | 1 |
285-2371 Radio Gp -Am/Fm Cassette, Cd Changer
| 28***71 | Return Pipe, Radio Group; -Am/Fm Cassette, Cd Changer | 1 |
349-7701 Radio Gp -Am/Fm/Wb/Cd
| 34***01 | Radio Group; -Am/Fm/Wb/Cd | 1 |
331-5292 Radio Gp -Am, Fm
| 33***92 | Radio Group; -Am/Fm/Wb | 1 |
284-8953 Radio Gp -Am/Fm/Wb/Cd Player
| 28***53 | Radio Group; -Am/Fm/Wb/Cd Player | 1 |
200-5731 Radio Gp -Am/Fm/Wb
| 20***31 | Radio Group; -Am/Fm/Wb | 1 |
200-5729 Radio Gp -Am/Fm/Wb
| 20***29 | Radio Group; -Am/Fm/Wb | 1 |
224-7213 Radio Gp -Am/Fm Cassette, Cd Changer
| 22***13 | Radio Group; -Am/Fm Cassette, Cd Changer | 1 |
240-5003 Seat & Mounting Gp -High Back, Tilt
| 24***03 | Seat & Mounting Group; -High Back, Tilt | 1 |
201-4436 Seat Belt Gp -Retractable
| 20***36 | Seat Belt Group; -Retractable, . Stand | 1 |
235-9020 Seat Belt Gp -Retractable, 3-In
| 23***20 | Seat Belt Group; -Retractable, 76-mm | 1 |
229-9090 Seat Gp -High Back, Tilt
| 22***90 | Seat Group; -High Back, Tilt | 1 |
242-3122 Seat & Mounting Gp -High Back, Tilt
| 24***22 | Seat Group; -High Back, Tilt | 1 |
161-3781 Seat Gp
| 16***81 | Seat Group | 1 |
188-0886 Seat Gp-Suspension
| 18***86 | Seat Group-Suspension; -Mechanical Suspension | 1 |
229-9089 Seat Gp-Suspension -High Back, Tilt
| 22***89 | Seat Group-Suspension; -High Back, Tilt | 1 |
161-3757 Support Gp-Seat
| 16***57 | Support Group-Seat; Support Gp - Seat | 1 |
235-8856 Support Gp-Seat
| 23***56 | Support Group-Seat | 1 |
164-0503 Suspension Gp-Seat
| 16***03 | Suspension Group-Seat | 1 |
229-9077 Suspension Gp-Seat
| 22***77 | Suspension Group-Seat; -Mechanical | 1 |
245-7892 Suspension Gp-Seat
| 24***92 | Suspension Group-Seat; -Mechanical | 1 |
222-5417 Trim Gp-Cab
| 22***17 | Trim Group-Cab | 1 |
299-5611 Trim Gp-Cab
| 29***11 | Trim Group-Cab | 1 |
238-5025 Trim Gp-Cab
| 23***25 | Trim Group-Cab | 1 |
197-2919 Window Gp-Cab
| 19***19 | Window Group-Cab | 1 |
266-3093 Window Gp-Cab -Front
| 26***93 | Window Group-Cab; -Front | 1 |
313-3545 Window Gp-Cab -Lh
| 31***45 | Window Group-Cab; -Lh | 1 |
317-3155 Window Gp-Cab -Lh
| 31***55 | Window Group-Cab; -Lh | 1 |
196-2392 Window Gp-Cab -Lh
| 19***92 | Window Group-Cab; -Lh | 1 |
238-5008 Window Gp-Cab -Side
| 23***08 | Window Group-Cab; -Side | 1 |
197-9956 Window Gp-Cab
| 19***56 | Window Group-Cab | 1 |
195-0440 Window Gp-Cab -Front
| 19***40 | Window Group-Cab; -Front | 1 |
197-9865 Window Gp-Front
| 19***65 | Window Group-Front | 1 |
Power Train
236-6675 Drive Gp-Final
| 09***09 | Ring-Back Up; (Backup) | 2 |
| 09***25 | Seal-O-Ring (Id=89.60mm) | 2 |
| 09***27 | Valve-Fill; (Track Tension Cylinder) | 1 |
279-9871 Final Drive Gp
| 14***91 | Bolt-Track; (M22x1.5x73-mm) | 188 |
| 21***75 | Link As-Track; -Grease Lubricated Track | 1 |
| 27***71 | Final Drive Group | 1 |
222-8855 Final Drive Gp
| 10***57 | Washer; (22x76.2x6-mm Thk) | 1 |
| 16***49 | Bolt; (M12x1.75x60-mm) | 1 |
| 21***92 | Cable As | 1 |
7y-0763 Sprocket Gp -2 Required
| 14***91 | Bolt-Track; (M22x1.5x73-mm) | 188 |
| 15***58 | Shoe-Track | 47 |
| 21***75 | Link As-Track; -Grease Lubricated Track | 1 |
Service Equipment And Supplies
269-5490 Film-Instruction -Joystick Control, Pattern 5
| 26***90 | Film-Instruction; -Joystick Control, Pattern 5 | 1 |
269-5489 Film-Instruction -Joystick Control, Pattern 4
| 26***89 | Film-Instruction; -Joystick Control, Pattern 4 | 1 |
279-3453 Film-Instruction -Joystick Control, Pattern 3
| 27***53 | Film-Instruction; -Joystick Control, Pattern 3 | 1 |
279-3452 Film-Instruction -Joystick Control, Pattern 2
| 27***52 | Film-Instruction; -Joystick Control, Pattern 2 | 1 |
259-1068 Film-Instruction -Joystick Control, Pattern 1
| 25***68 | Film-Instruction; -Joystick Control, Pattern 1 | 1 |
269-5492 Film-Instruction -Joystick Control, Pattern 7
| 26***92 | Film-Instruction; -Joystick Control, Pattern 7 | 1 |
279-3455 Film-Instruction -Joystick Control, Pattern 5
| 27***55 | Film-Instruction; -Joystick Control, Pattern 5 | 1 |
269-5488 Film-Instruction -Joystick Control, Pattern 3
| 26***88 | Film-Instruction; -Joystick Control, Pattern 3 | 1 |
279-3457 Film-Instruction -Joystick Control, Pattern 7
| 27***57 | Film-Instruction; -Joystick Control, Pattern 7 | 1 |
279-3456 Film-Instruction -Joystick Control, Pattern 6
| 27***56 | Film-Instruction; -Joystick Control, Pattern 6 | 1 |
269-5775 Film-Instruction -Joystick Control, Pattern 2
| 26***75 | Film-Instruction; -Joystick Control, Pattern 2 | 1 |
269-5491 Film-Instruction -Joystick Control, Pattern 6
| 26***91 | Film-Instruction; -Joystick Control, Pattern 6 | 1 |
279-3454 Film-Instruction -Joystick Control, Pattern 4
| 27***54 | Film-Instruction; -Joystick Control, Pattern 4 | 1 |
285-5316 Plate & Film Gp
| 28***16 | Plate & Film Group | 1 |
239-6220 Plate & Film Gp
| 23***20 | Plate & Film Group | 1 |
240-7175 Plate & Film Gp
| 24***75 | Plate & Film Group | 1 |
Undercarriage
297-9152 Adjustment Gp-Hydraulic Track
| 09***30 | Ring; (Retaining) | 2 |
| 09***31 | Ring - Retaining | 1 |
| 09***57 | Gauge-Oil Level (Dipstick) | 1 |
236-1883 Fastener Gp-Carbody
| 09***30 | Ring; (Retaining) | 2 |
| 09***31 | Ring - Retaining | 1 |
| 09***57 | Gauge-Oil Level (Dipstick) | 1 |
224-9641 Frame Gp-Track Roller
| 20***13 | Motor & Mtg Group-Swing | 1 |
| 22***20 | Drive Group-Swing | 1 |
| 22***41 | Frame Group-Track Roller | 1 |
152-8569 Guard Gp-Track Guide
| 15***69 | Guard Group-Track Guide | 1 |
| 20***08 | Drive Group-Swing | 1 |
| 20***13 | Motor & Mtg Group-Swing | 1 |
190-5406 Guard Gp-Travel Motor
| 09***84 | Seal-O-Ring (Id=15.80mm) | 1 |
| 09***90 | Seal-O-Ring (Id=21.80mm) | 1 |
| 09***96 | Seal-O-Ring (Id=28.70mm) | 1 |
102-8152 Idler Gp-Front
| 09***21 | Filter-Oil; (Advanced Efficiency)(Hydraulic, Case Drain) | 1 |
| 10***52 | Idler Group-Front | 1 |
| 12***76 | Base As; (Oil Filter) | 1 |
152-8559 Idler Gp-Front
| 08***59 | Plug As | 1 |
| 09***32 | Bolt-Socket Head; (M12x1.75x95-mm) | 2 |
| 09***04 | Bolt-Socket Head; (M12x1.75x110-mm) | 4 |
152-8561 Idler Gp-Front
| 12***94 | Plug; (Break Off) | 1 |
| 12***17 | Plug | 1 |
| 12***62 | Seal-O-Ring | 1 |
213-1975 Link As-Track -Grease Lubricated Track
| 12***94 | Plug; (Break Off) | 1 |
| 12***17 | Plug | 1 |
| 12***62 | Seal-O-Ring | 1 |
336-7738 Roller Ar-Track -Star
| 21***89 | Drive Ar-Swing | 1 |
| 21***90 | Pump & Lines Group-Hydraulic Tank Fill | 1 |
| 21***91 | Lines Group-Pump | 1 |
152-8574 Roller Ar-Track & Carrier
| 15***74 | Roller Ar-Track & Carrier | 1 |
| 21***30 | Kit-Seal; (Control Valve) | 1 |
224-9642 Roller Ar-Track & Carrier
| 09***62 | Washer; (Hard) (3.4x7x0.8mm Thk) | 2 |
| 10***03 | Kit; (Receptacle) (3-Pin) (Includes Receptacle As & Wedge) | 1 |
| 12***27 | Screw-Pan Head; (M3x0.5x16-mm) | 2 |
228-6405 Roller Gp-Track
| 16***80 | Lever Group-Control; -Hydraulic Lockout | 1 |
| 17***08 | Cover | 1 |
| 22***05 | Roller Group-Track | 1 |
183-2879 Roller Gp-Track-Double Flange
| 14***55 | Union As | 26 |
| 15***26 | Union Assembly | 2 |
| 18***79 | Roller Group-Track-Double Flange | 1 |
140-2456 Roller Gp-Track-Single Flange
| 14***56 | Roller Group-Track-Single Flange | 1 |
| 14***55 | Union As | 22 |
| 15***26 | Union Assembly | 2 |
183-2874 Roller Gp-Track-Single Flange
| 14***55 | Union As | 14 |
| 15***26 | Union Assembly | 6 |
| 18***74 | Roller Group-Track-Single Flange | 1 |
152-8562 Spring Gp-Recoil
| 10***77 | Bolt-Socket Head; (M10x1.5x45-mm) | 4 |
| 15***62 | Spring Group-Recoil | 1 |
| 15***62 | Union As | 1 |
219-1357 Tilt Gp-Cab Leveling
| 11***65 | Bracket | 1 |
| 12***50 | Valve-Check; (Quick Coupler Solenoid) | 2 |
| 12***44 | Hose Assem. | 1 |
7y-1635 Adjustment Gp-Hydraulic Track
| 19***93 | Drive Group-Swing; -Without Motor | 1 |
| 7Y***35 | Track Adjuster & Recoil Group; (Lh) | 1 |
152-1734 Track Gp
| 10***02 | Bolt-Socket Head; (M12x1.75x30-mm) | 2 |
| 10***19 | Bolt; (Socket Head) (M12x1.75x70mm) | 2 |
| 14***47 | Elbow; (-12 Orb/Orfs) | 1 |
188-9778 Track Gp
| 11***34 | Tee-O-Ring | 1 |
| 12***75 | Filter Group-Oil; -Hyraulic Oil-Hydraulic, Case Drain | 2 |
| 14***28 | Connector Assem. | 1 |
222-6803 Undercarriage Ar
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 11***17 | Clip | 1 |
| 13***00 | Clip; (Tab) | 3 |
239-1305 Undercarriage Ar
| 11***31 | Hose As | 2 |
| 14***28 | Connector Assem. | 1 |
| 14***35 | Connect Group; (Each Includes) | 4 |
222-6817 Undercarriage Ar
| 14***18 | Reducer; (-8orfs/-12orfs Swivel) | 5 |
| 14***55 | Union As | 18 |
| 15***26 | Union Assembly | 1 |
225-8351 Undercarriage Ar
| 14***27 | Connector Group | 1 |
| 14***18 | Reducer; (-8orfs/-12orfs Swivel) | 3 |
| 14***57 | Union Bulkhead; (Orfs) | 6 |
224-9043 Undercarriage Ar
| 14***18 | Reducer; (-8orfs/-12orfs Swivel) | 5 |
| 14***55 | Union As | 14 |
| 15***26 | Union Assembly | 1 |
219-4808 Undercarriage Ar
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 11***17 | Clip | 1 |
| 13***00 | Clip; (Tab) | 3 |
219-4784 Undercarriage Ar -Tilting
| 03***48 | Clip; (11.11mm .437in Id) | 1 |
| 11***17 | Clip | 1 |
| 13***00 | Clip; (Tab) | 3 |
239-1306 Undercarriage Ar
| 09***66 | Clamp-Hose | 2 |
| 16***51 | Bracket | 1 |
| 16***36 | Elbow | 1 |
1290T serial number reference
On Cat forestry carriers of this era the PIN plate is a riveted metal tag mounted on the machine frame, typically on the right-hand side near the cab entry or ROPS post, with a duplicate stamped into the frame rail itself. Read the first three characters as the serial number prefix (identifies model/series), followed by a sequential unit number; on 1290T units this prefix reads BZM. Always cross-check the plate against the frame-stamped number since plates can be swapped or go missing on older machines.
| Prefix | Identifies | Notes |
|---|---|---|
| BZM | 1290T Track Feller Buncher, forest products line | Serial range runs BZM00001-UP. This is the only prefix documented for the 1290T track feller buncher; no separate wheel-machine or later-generation prefix exists for this model. Engine fitted and plant of manufacture are not documented in available literature - confirm with dealer. |
Frequently asked questions
What engine does the Caterpillar 1290T use?
Factory literature confirming the exact engine for the 1290T is not publicly available. Parts cross-references tie the wider Prentice/Cat 1000-2000-series track carrier family to a Caterpillar mid-range diesel in the 3126/C7 platform, but that is not confirmed specifically for the 1290T. Check the engine data plate or run the machine's PIN with a dealer before ordering engine parts.
What is the operating weight of the Caterpillar 1290T?
No verified operating weight is published for the 1290T. It falls in the mid-size class of track feller bunchers built on the Prentice/Cat 1000-2000-series chassis, but exact weight varies by felling-head choice (disc-saw vs. bar-saw/shear) and by whether the self-leveling chassis option is fitted. Confirm weight from the machine's data plate or a dealer lookup by serial number.
What replaced the Caterpillar 1290T?
Caterpillar phased out the Prentice-derived 1290T and its 1000-2000-series relatives after developing its own C9-ACERT-powered track feller buncher line - the 511, 521, 522, 532, 541, and 552 series. Those models are a clean-sheet Cat design, not a direct one-for-one replacement, so parts and configurations do not carry over from the 1290T.
What 1290T owners discuss
What engine is actually in a Cat 1290T, and is it the same C9 ACERT used in Cat's own 511/521/522/532 feller bunchers?
No. The 1290T is Prentice lineage carried into the Cat Forest Products line after the 2007 Blount acquisition, not one of Cat's own-design track feller bunchers. Those own-design machines run the C9 ACERT; the 1290T does not share that platform. Very little dedicated literature was republished for the 1290T after the brand switch, so most parts counters will not commit to an engine call-out off the model number alone — they ask for the dataplate/ECM serial before quoting anything, because engine and ancillary fitment can vary within the production run. Pull the engine family straight off the dataplate or ECM rather than assuming, and have your dealer verify emissions tier and fuel system type before ordering major engine parts.
The stick/boom feels sluggish or 'sleepy' compared to how it used to run — what's the real cause?
This is a known complaint on the 1290T's stick boom, and the diagnostic path mechanics walk owners through is consistent. Start at the control valve: pull the spool and confirm it travels freely with no metal shavings or debris in the bore. Next check the relief valve cartridges for trapped debris or a damaged O-ring, since either will bleed off pressure before it reaches the cylinder. If both check out clean, gauge the system pressure against factory spec — a reading that's low across the board usually means a tired hydraulic pump, while a function that's slow only on one cylinder points to internal bypass in that cylinder's seals. Work through it in that order before condemning the pump.
How much undercarriage wear is normal, and when does it cross into a red flag?
The 1090/1190/1190T/1290T/1390 family shares undercarriage wear components — bushings, sleeve bearings, and track links cross over between them — so wear behavior across the family is a fair guide for the 1290T specifically. A well-kept sibling machine in this family logged around 5,900 hours with undercarriage still sitting around 80 percent remaining and no other issues reported, which is the kind of wear curve this class of machine is expected to show under normal duty. Forestry ground (stumps, mud, embedded rock) accelerates pin and bushing wear faster than dirt or gravel work, and packed sawdust around sprockets and rollers speeds it up further if the undercarriage isn't blown out regularly. Wear on schedule is normal; cracked links, a chunked sprocket, or visible mainframe/track-frame welds are not — have your dealer verify any structural finding before you buy or before returning the machine to service.
Hydraulic oil runs hot in summer cutting — is that just how these machines are, or a fault?
Some heat soak is normal on this class of track feller buncher: sawdust and forestry debris pack into the radiator and hydraulic oil cooler cores faster than on a dirt-moving machine, and a clogged core alone will push oil temps up in hot weather. Blow the cores out regularly and that alone resolves most heat complaints. If temps still climb with clean cores, look internally — high-pressure oil bypassing into the low-pressure return through a worn valve spool or cylinder seal releases heat directly into the system and won't show as an external leak. Persistent overheating after a clean core check warrants a pressure and flow test from your dealer rather than just adding more cooling capacity.
Intermittent electrical faults, sensor codes that clear on their own, safety switches that don't register — is this a common complaint on this generation of machine?
Yes. Chafed wiring harnesses are a well-documented weak point on track feller bunchers of this vintage, because harness runs near the boom and felling head get bunched up and rub against moving components and falling limbs over time. Later forestry machines addressed this with two-piece harnesses and cylinder/hose guards specifically to cut down on chafe-related failures — the 1290T generation predates those changes. Before replacing a sensor that's throwing an intermittent code, check the harness routing near the boom pivots and felling head first, and clean/re-seat connectors for corrosion. Have your dealer verify any safety-interlock or lockout circuit fault rather than bypassing it, since those circuits are there to stop the felling head under fault conditions.
Why is it so hard to find a spec sheet or documentation for this exact machine?
This is a recurring frustration reported by owners and parts buyers alike. Cat carried the 1290T over from Prentice essentially as-is after folding Blount's forestry division into Cat Forest Products, without issuing new dedicated marketing or spec literature under the Cat name. Search results and parts lookups constantly point back to Cat's own-design feller bunchers or to the later Prentice C-series wheel machines (2470C/2570C/2670C) instead, which are different platforms entirely. Treat any spec sheet, engine call-out, or capacity figure you find under a similarly numbered model with caution unless it explicitly ties back to the 1290T serial range — verify against the machine's own dataplate and your dealer's records rather than marketing pages for adjacent models.
What should I check before buying a used 1290T?
Run the stick/boom through full extension and retraction and watch for the sluggish response covered above — cheap to check, expensive if it points to a worn pump or bypassing cylinder. Confirm hydraulic pressures against factory spec and inspect hoses and fittings for weeping or chafe damage near the boom. Check undercarriage wear percentage and look closely at sprockets, rollers, and track links for cracking, not just pad wear. Inspect the wiring harness routing near the boom and felling head for chafe points, and cycle every safety interlock and lockout switch to confirm it actually registers. Check the felling head's saw disc or shear knife and accumulator arms for wear and hydraulic bypass. Because so little of this model is publicly documented, get the actual serial number and pull maintenance/service history through your dealer rather than relying on generic spec sheets — engine and component fitment can vary within the production run. Have your dealer verify any structural weld, hydraulic pressure reading, or safety-interlock finding before you commit to the purchase.
Compiled from owner and technician discussions across the industry — experiences vary by serial range and machine history.
Need a specific 1290T part?
Search live OEM part data, check fitment, and cross-reference alternatives with Heavy Parts AI.